diff options
Diffstat (limited to 'src/arm64/xilinx/zynqmp-zcu104-revA.dts')
| -rw-r--r-- | src/arm64/xilinx/zynqmp-zcu104-revA.dts | 48 |
1 files changed, 37 insertions, 11 deletions
diff --git a/src/arm64/xilinx/zynqmp-zcu104-revA.dts b/src/arm64/xilinx/zynqmp-zcu104-revA.dts index bd8f20f3223d..e185709c0d84 100644 --- a/src/arm64/xilinx/zynqmp-zcu104-revA.dts +++ b/src/arm64/xilinx/zynqmp-zcu104-revA.dts @@ -2,9 +2,10 @@ /* * dts file for Xilinx ZynqMP ZCU104 * - * (C) Copyright 2017 - 2021, Xilinx, Inc. + * (C) Copyright 2017 - 2022, Xilinx, Inc. + * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. * - * Michal Simek <michal.simek@xilinx.com> + * Michal Simek <michal.simek@amd.com> */ /dts-v1/; @@ -109,12 +110,19 @@ phy-mode = "rgmii-id"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gem3_default>; - phy0: ethernet-phy@c { - reg = <0xc>; - ti,rx-internal-delay = <0x8>; - ti,tx-internal-delay = <0xa>; - ti,fifo-depth = <0x1>; - ti,dp83867-rxctrl-strap-quirk; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@c { + #phy-cells = <1>; + compatible = "ethernet-phy-id2000.a231"; + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; + reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; + }; }; }; @@ -122,6 +130,10 @@ status = "okay"; }; +&gpu { + status = "okay"; +}; + &i2c1 { status = "okay"; clock-frequency = <400000>; @@ -398,20 +410,22 @@ conf { groups = "usb0_0_grp"; - slew-rate = <SLEW_RATE_SLOW>; power-source = <IO_STANDARD_LVCMOS18>; - drive-strength = <12>; }; conf-rx { pins = "MIO52", "MIO53", "MIO55"; bias-high-impedance; + drive-strength = <12>; + slew-rate = <SLEW_RATE_FAST>; }; conf-tx { pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", "MIO60", "MIO61", "MIO62", "MIO63"; bias-disable; + drive-strength = <4>; + slew-rate = <SLEW_RATE_SLOW>; }; }; }; @@ -430,7 +444,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <0x0>; - spi-tx-bus-width = <1>; + spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ }; @@ -497,6 +511,18 @@ status = "okay"; }; +&xilinx_ams { + status = "okay"; +}; + +&ams_ps { + status = "okay"; +}; + +&ams_pl { + status = "okay"; +}; + &zynqmp_dpdma { status = "okay"; }; |