diff options
Diffstat (limited to 'src/powerpc/tqm5200.dts')
| -rw-r--r-- | src/powerpc/tqm5200.dts | 211 |
1 files changed, 211 insertions, 0 deletions
diff --git a/src/powerpc/tqm5200.dts b/src/powerpc/tqm5200.dts new file mode 100644 index 000000000000..1db07f6cf133 --- /dev/null +++ b/src/powerpc/tqm5200.dts @@ -0,0 +1,211 @@ +/* + * TQM5200 board Device Tree Source + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz <m8@semihalf.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "tqc,tqm5200"; + compatible = "tqc,tqm5200"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x04000000>; // 64MB + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + timer@600 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + fsl,has-wdt; + }; + + can@900 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 17 0>; + reg = <0x900 0x80>; + }; + + can@980 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 18 0>; + reg = <0x980 0x80>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + usb@1000 { + compatible = "fsl,mpc5200-ohci","ohci-be"; + reg = <0x1000 0xff>; + interrupts = <2 6 0>; + }; + + dma-controller@1200 { + compatible = "fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + serial@2000 { // PSC1 + compatible = "fsl,mpc5200-psc-uart"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + serial@2200 { // PSC2 + compatible = "fsl,mpc5200-psc-uart"; + reg = <0x2200 0x100>; + interrupts = <2 2 0>; + }; + + serial@2400 { // PSC3 + compatible = "fsl,mpc5200-psc-uart"; + reg = <0x2400 0x100>; + interrupts = <2 3 0>; + }; + + ethernet@3000 { + compatible = "fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + ata@3a00 { + compatible = "fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + + rtc@68 { + compatible = "dallas,ds1307"; + reg = <0x68>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + localbus { + compatible = "fsl,mpc5200-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xfc000000 0x02000000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <4>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 + 0xc000 0 0 2 &mpc5200_pic 0 0 3 + 0xc000 0 0 3 &mpc5200_pic 0 0 3 + 0xc000 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000 + 0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; + }; +}; |