1445 files changed, 168762 insertions, 14972 deletions

diff --git a/src/arc/abilis_tb100.dtsi b/src/arc/abilis_tb100.dtsi
new file mode 100644
index 000000000000..02410b211433
--- /dev/null
+++ b/src/arc/abilis_tb100.dtsi
@@ -0,0 +1,348 @@
+/*
+ * Abilis Systems TB100 SOC device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+/include/ "abilis_tb10x.dtsi"
+
+
+/ {
+	soc100 {
+		bus-frequency	= <166666666>;
+
+		pll0: oscillator {
+			clock-frequency  = <1000000000>;
+		};
+		cpu_clk: clkdiv_cpu {
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+		ahb_clk: clkdiv_ahb {
+			clock-mult = <1>;
+			clock-div = <6>;
+		};
+
+		iomux: iomux@FF10601c {
+			/* Port 1 */
+			pctl_tsin_s0: pctl-tsin-s0 {   /* Serial TS-in 0 */
+				abilis,function = "mis0";
+			};
+			pctl_tsin_s1: pctl-tsin-s1 {   /* Serial TS-in 1 */
+				abilis,function = "mis1";
+			};
+			pctl_gpio_a: pctl-gpio-a {     /* GPIO bank A */
+				abilis,function = "gpioa";
+			};
+			pctl_tsin_p1: pctl-tsin-p1 {   /* Parallel TS-in 1 */
+				abilis,function = "mip1";
+			};
+			/* Port 2 */
+			pctl_tsin_s2: pctl-tsin-s2 {   /* Serial TS-in 2 */
+				abilis,function = "mis2";
+			};
+			pctl_tsin_s3: pctl-tsin-s3 {   /* Serial TS-in 3 */
+				abilis,function = "mis3";
+			};
+			pctl_gpio_c: pctl-gpio-c {     /* GPIO bank C */
+				abilis,function = "gpioc";
+			};
+			pctl_tsin_p3: pctl-tsin-p3 {   /* Parallel TS-in 3 */
+				abilis,function = "mip3";
+			};
+			/* Port 3 */
+			pctl_tsin_s4: pctl-tsin-s4 {   /* Serial TS-in 4 */
+				abilis,function = "mis4";
+			};
+			pctl_tsin_s5: pctl-tsin-s5 {   /* Serial TS-in 5 */
+				abilis,function = "mis5";
+			};
+			pctl_gpio_e: pctl-gpio-e {     /* GPIO bank E */
+				abilis,function = "gpioe";
+			};
+			pctl_tsin_p5: pctl-tsin-p5 {   /* Parallel TS-in 5 */
+				abilis,function = "mip5";
+			};
+			/* Port 4 */
+			pctl_tsin_s6: pctl-tsin-s6 {   /* Serial TS-in 6 */
+				abilis,function = "mis6";
+			};
+			pctl_tsin_s7: pctl-tsin-s7 {   /* Serial TS-in 7 */
+				abilis,function = "mis7";
+			};
+			pctl_gpio_g: pctl-gpio-g {     /* GPIO bank G */
+				abilis,function = "gpiog";
+			};
+			pctl_tsin_p7: pctl-tsin-p7 {   /* Parallel TS-in 7 */
+				abilis,function = "mip7";
+			};
+			/* Port 5 */
+			pctl_gpio_j: pctl-gpio-j {     /* GPIO bank J */
+				abilis,function = "gpioj";
+			};
+			pctl_gpio_k: pctl-gpio-k {     /* GPIO bank K */
+				abilis,function = "gpiok";
+			};
+			pctl_ciplus: pctl-ciplus {     /* CI+ interface */
+				abilis,function = "ciplus";
+			};
+			pctl_mcard: pctl-mcard {       /* M-Card interface */
+				abilis,function = "mcard";
+			};
+			/* Port 6 */
+			pctl_tsout_p: pctl-tsout-p {   /* Parallel TS-out */
+				abilis,function = "mop";
+			};
+			pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */
+				abilis,function = "mos0";
+			};
+			pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */
+				abilis,function = "mos1";
+			};
+			pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */
+				abilis,function = "mos2";
+			};
+			pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */
+				abilis,function = "mos3";
+			};
+			/* Port 7 */
+			pctl_uart0: pctl-uart0 {       /* UART 0 */
+				abilis,function = "uart0";
+			};
+			pctl_uart1: pctl-uart1 {       /* UART 1 */
+				abilis,function = "uart1";
+			};
+			pctl_gpio_l: pctl-gpio-l {     /* GPIO bank L */
+				abilis,function = "gpiol";
+			};
+			pctl_gpio_m: pctl-gpio-m {     /* GPIO bank M */
+				abilis,function = "gpiom";
+			};
+			/* Port 8 */
+			pctl_spi3: pctl-spi3 {
+				abilis,function = "spi3";
+			};
+			/* Port 9 */
+			pctl_spi1: pctl-spi1 {
+				abilis,function = "spi1";
+			};
+			pctl_gpio_n: pctl-gpio-n {
+				abilis,function = "gpion";
+			};
+			/* Unmuxed GPIOs */
+			pctl_gpio_b: pctl-gpio-b {
+				abilis,function = "gpiob";
+			};
+			pctl_gpio_d: pctl-gpio-d {
+				abilis,function = "gpiod";
+			};
+			pctl_gpio_f: pctl-gpio-f {
+				abilis,function = "gpiof";
+			};
+			pctl_gpio_h: pctl-gpio-h {
+				abilis,function = "gpioh";
+			};
+			pctl_gpio_i: pctl-gpio-i {
+				abilis,function = "gpioi";
+			};
+		};
+
+		gpioa: gpio@FF140000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF140000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioa";
+		};
+		gpiob: gpio@FF141000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF141000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiob";
+		};
+		gpioc: gpio@FF142000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF142000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioc";
+		};
+		gpiod: gpio@FF143000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF143000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiod";
+		};
+		gpioe: gpio@FF144000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF144000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioe";
+		};
+		gpiof: gpio@FF145000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF145000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiof";
+		};
+		gpiog: gpio@FF146000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF146000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiog";
+		};
+		gpioh: gpio@FF147000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF147000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioh";
+		};
+		gpioi: gpio@FF148000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF148000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <12>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioi";
+		};
+		gpioj: gpio@FF149000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF149000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <32>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioj";
+		};
+		gpiok: gpio@FF14a000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF14A000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <22>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiok";
+		};
+		gpiol: gpio@FF14b000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF14B000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <4>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiol";
+		};
+		gpiom: gpio@FF14c000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF14C000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <4>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiom";
+		};
+		gpion: gpio@FF14d000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF14D000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <5>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpion";
+		};
+	};
+};
diff --git a/src/arc/abilis_tb100_dvk.dts b/src/arc/abilis_tb100_dvk.dts
new file mode 100644
index 000000000000..3acf04db8030
--- /dev/null
+++ b/src/arc/abilis_tb100_dvk.dts
@@ -0,0 +1,128 @@
+/*
+ * Abilis Systems TB100 Development Kit PCB device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+/dts-v1/;
+
+/include/ "abilis_tb100.dtsi"
+
+/ {
+	model = "abilis,tb100";
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8";
+	};
+
+	aliases { };
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x08000000>;	/* 128M */
+	};
+
+	soc100 {
+		uart@FF100000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pctl_uart0>;
+		};
+		ethernet@FE100000 {
+			phy-mode = "rgmii";
+		};
+
+		i2c0: i2c@FF120000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c1: i2c@FF121000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c2: i2c@FF122000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c3: i2c@FF123000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c4: i2c@FF124000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			power {
+				label = "Power";
+				gpios = <&gpioi 0 0>;
+				linux,default-trigger = "default-on";
+			};
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&gpioi 1 0>;
+				linux,default-trigger = "heartbeat";
+			};
+			led2 {
+				label = "LED2";
+				gpios = <&gpioi 2 0>;
+				default-state = "off";
+			};
+			led3 {
+				label = "LED3";
+				gpios = <&gpioi 3 0>;
+				default-state = "off";
+			};
+			led4 {
+				label = "LED4";
+				gpios = <&gpioi 4 0>;
+				default-state = "off";
+			};
+			led5 {
+				label = "LED5";
+				gpios = <&gpioi 5 0>;
+				default-state = "off";
+			};
+			led6 {
+				label = "LED6";
+				gpios = <&gpioi 6 0>;
+				default-state = "off";
+			};
+			led7 {
+				label = "LED7";
+				gpios = <&gpioi 7 0>;
+				default-state = "off";
+			};
+			led8 {
+				label = "LED8";
+				gpios = <&gpioi 8 0>;
+				default-state = "off";
+			};
+			led9 {
+				label = "LED9";
+				gpios = <&gpioi 9 0>;
+				default-state = "off";
+			};
+			led10 {
+				label = "LED10";
+				gpios = <&gpioi 10 0>;
+				default-state = "off";
+			};
+			led11 {
+				label = "LED11";
+				gpios = <&gpioi 11 0>;
+				default-state = "off";
+			};
+		};
+	};
+};
diff --git a/src/arc/abilis_tb101.dtsi b/src/arc/abilis_tb101.dtsi
new file mode 100644
index 000000000000..f9e7686044eb
--- /dev/null
+++ b/src/arc/abilis_tb101.dtsi
@@ -0,0 +1,357 @@
+/*
+ * Abilis Systems TB101 SOC device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+/include/ "abilis_tb10x.dtsi"
+
+
+/ {
+	soc100 {
+		bus-frequency	= <166666666>;
+
+		pll0: oscillator {
+			clock-frequency  = <1000000000>;
+		};
+		cpu_clk: clkdiv_cpu {
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+		ahb_clk: clkdiv_ahb {
+			clock-mult = <1>;
+			clock-div = <6>;
+		};
+
+		iomux: iomux@FF10601c {
+			/* Port 1 */
+			pctl_tsin_s0: pctl-tsin-s0 {   /* Serial TS-in 0 */
+				abilis,function = "mis0";
+			};
+			pctl_tsin_s1: pctl-tsin-s1 {   /* Serial TS-in 1 */
+				abilis,function = "mis1";
+			};
+			pctl_gpio_a: pctl-gpio-a {     /* GPIO bank A */
+				abilis,function = "gpioa";
+			};
+			pctl_tsin_p1: pctl-tsin-p1 {   /* Parallel TS-in 1 */
+				abilis,function = "mip1";
+			};
+			/* Port 2 */
+			pctl_tsin_s2: pctl-tsin-s2 {   /* Serial TS-in 2 */
+				abilis,function = "mis2";
+			};
+			pctl_tsin_s3: pctl-tsin-s3 {   /* Serial TS-in 3 */
+				abilis,function = "mis3";
+			};
+			pctl_gpio_c: pctl-gpio-c {     /* GPIO bank C */
+				abilis,function = "gpioc";
+			};
+			pctl_tsin_p3: pctl-tsin-p3 {   /* Parallel TS-in 3 */
+				abilis,function = "mip3";
+			};
+			/* Port 3 */
+			pctl_tsin_s4: pctl-tsin-s4 {   /* Serial TS-in 4 */
+				abilis,function = "mis4";
+			};
+			pctl_tsin_s5: pctl-tsin-s5 {   /* Serial TS-in 5 */
+				abilis,function = "mis5";
+			};
+			pctl_gpio_e: pctl-gpio-e {     /* GPIO bank E */
+				abilis,function = "gpioe";
+			};
+			pctl_tsin_p5: pctl-tsin-p5 {   /* Parallel TS-in 5 */
+				abilis,function = "mip5";
+			};
+			/* Port 4 */
+			pctl_tsin_s6: pctl-tsin-s6 {   /* Serial TS-in 6 */
+				abilis,function = "mis6";
+			};
+			pctl_tsin_s7: pctl-tsin-s7 {   /* Serial TS-in 7 */
+				abilis,function = "mis7";
+			};
+			pctl_gpio_g: pctl-gpio-g {     /* GPIO bank G */
+				abilis,function = "gpiog";
+			};
+			pctl_tsin_p7: pctl-tsin-p7 {   /* Parallel TS-in 7 */
+				abilis,function = "mip7";
+			};
+			/* Port 5 */
+			pctl_gpio_j: pctl-gpio-j {     /* GPIO bank J */
+				abilis,function = "gpioj";
+			};
+			pctl_gpio_k: pctl-gpio-k {     /* GPIO bank K */
+				abilis,function = "gpiok";
+			};
+			pctl_ciplus: pctl-ciplus {     /* CI+ interface */
+				abilis,function = "ciplus";
+			};
+			pctl_mcard: pctl-mcard {       /* M-Card interface */
+				abilis,function = "mcard";
+			};
+			pctl_stc0: pctl-stc0 {         /* Smart card I/F 0 */
+				abilis,function = "stc0";
+			};
+			pctl_stc1: pctl-stc1 {         /* Smart card I/F 1 */
+				abilis,function = "stc1";
+			};
+			/* Port 6 */
+			pctl_tsout_p: pctl-tsout-p {   /* Parallel TS-out */
+				abilis,function = "mop";
+			};
+			pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */
+				abilis,function = "mos0";
+			};
+			pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */
+				abilis,function = "mos1";
+			};
+			pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */
+				abilis,function = "mos2";
+			};
+			pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */
+				abilis,function = "mos3";
+			};
+			/* Port 7 */
+			pctl_uart0: pctl-uart0 {       /* UART 0 */
+				abilis,function = "uart0";
+			};
+			pctl_uart1: pctl-uart1 {       /* UART 1 */
+				abilis,function = "uart1";
+			};
+			pctl_gpio_l: pctl-gpio-l {     /* GPIO bank L */
+				abilis,function = "gpiol";
+			};
+			pctl_gpio_m: pctl-gpio-m {     /* GPIO bank M */
+				abilis,function = "gpiom";
+			};
+			/* Port 8 */
+			pctl_spi3: pctl-spi3 {
+				abilis,function = "spi3";
+			};
+			pctl_jtag: pctl-jtag {
+				abilis,function = "jtag";
+			};
+			/* Port 9 */
+			pctl_spi1: pctl-spi1 {
+				abilis,function = "spi1";
+			};
+			pctl_gpio_n: pctl-gpio-n {
+				abilis,function = "gpion";
+			};
+			/* Unmuxed GPIOs */
+			pctl_gpio_b: pctl-gpio-b {
+				abilis,function = "gpiob";
+			};
+			pctl_gpio_d: pctl-gpio-d {
+				abilis,function = "gpiod";
+			};
+			pctl_gpio_f: pctl-gpio-f {
+				abilis,function = "gpiof";
+			};
+			pctl_gpio_h: pctl-gpio-h {
+				abilis,function = "gpioh";
+			};
+			pctl_gpio_i: pctl-gpio-i {
+				abilis,function = "gpioi";
+			};
+		};
+
+		gpioa: gpio@FF140000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF140000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioa";
+		};
+		gpiob: gpio@FF141000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF141000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiob";
+		};
+		gpioc: gpio@FF142000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF142000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioc";
+		};
+		gpiod: gpio@FF143000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF143000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiod";
+		};
+		gpioe: gpio@FF144000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF144000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioe";
+		};
+		gpiof: gpio@FF145000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF145000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiof";
+		};
+		gpiog: gpio@FF146000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF146000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiog";
+		};
+		gpioh: gpio@FF147000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF147000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioh";
+		};
+		gpioi: gpio@FF148000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF148000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <12>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioi";
+		};
+		gpioj: gpio@FF149000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF149000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <32>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioj";
+		};
+		gpiok: gpio@FF14a000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF14A000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <22>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiok";
+		};
+		gpiol: gpio@FF14b000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF14B000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <4>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiol";
+		};
+		gpiom: gpio@FF14c000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF14C000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <4>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiom";
+		};
+		gpion: gpio@FF14d000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF14D000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <5>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpion";
+		};
+	};
+};
diff --git a/src/arc/abilis_tb101_dvk.dts b/src/arc/abilis_tb101_dvk.dts
new file mode 100644
index 000000000000..37d88c5dd181
--- /dev/null
+++ b/src/arc/abilis_tb101_dvk.dts
@@ -0,0 +1,128 @@
+/*
+ * Abilis Systems TB101 Development Kit PCB device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+/dts-v1/;
+
+/include/ "abilis_tb101.dtsi"
+
+/ {
+	model = "abilis,tb101";
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8";
+	};
+
+	aliases { };
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x08000000>;	/* 128M */
+	};
+
+	soc100 {
+		uart@FF100000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pctl_uart0>;
+		};
+		ethernet@FE100000 {
+			phy-mode = "rgmii";
+		};
+
+		i2c0: i2c@FF120000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c1: i2c@FF121000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c2: i2c@FF122000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c3: i2c@FF123000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c4: i2c@FF124000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			power {
+				label = "Power";
+				gpios = <&gpioi 0 0>;
+				linux,default-trigger = "default-on";
+			};
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&gpioi 1 0>;
+				linux,default-trigger = "heartbeat";
+			};
+			led2 {
+				label = "LED2";
+				gpios = <&gpioi 2 0>;
+				default-state = "off";
+			};
+			led3 {
+				label = "LED3";
+				gpios = <&gpioi 3 0>;
+				default-state = "off";
+			};
+			led4 {
+				label = "LED4";
+				gpios = <&gpioi 4 0>;
+				default-state = "off";
+			};
+			led5 {
+				label = "LED5";
+				gpios = <&gpioi 5 0>;
+				default-state = "off";
+			};
+			led6 {
+				label = "LED6";
+				gpios = <&gpioi 6 0>;
+				default-state = "off";
+			};
+			led7 {
+				label = "LED7";
+				gpios = <&gpioi 7 0>;
+				default-state = "off";
+			};
+			led8 {
+				label = "LED8";
+				gpios = <&gpioi 8 0>;
+				default-state = "off";
+			};
+			led9 {
+				label = "LED9";
+				gpios = <&gpioi 9 0>;
+				default-state = "off";
+			};
+			led10 {
+				label = "LED10";
+				gpios = <&gpioi 10 0>;
+				default-state = "off";
+			};
+			led11 {
+				label = "LED11";
+				gpios = <&gpioi 11 0>;
+				default-state = "off";
+			};
+		};
+	};
+};
diff --git a/src/arc/abilis_tb10x.dtsi b/src/arc/abilis_tb10x.dtsi
new file mode 100644
index 000000000000..3121536b25a3
--- /dev/null
+++ b/src/arc/abilis_tb10x.dtsi
@@ -0,0 +1,255 @@
+/*
+ * Abilis Systems TB10X SOC device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+
+/ {
+	compatible		= "abilis,arc-tb10x";
+	#address-cells		= <1>;
+	#size-cells		= <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "snps,arc770d";
+			reg = <0>;
+		};
+	};
+
+	/* TIMER0 with interrupt for clockevent */
+	timer0 {
+		compatible = "snps,arc-timer";
+		interrupts = <3>;
+		interrupt-parent = <&intc>;
+		clocks = <&cpu_clk>;
+	};
+
+	/* TIMER1 for free running clocksource */
+	timer1 {
+		compatible = "snps,arc-timer";
+		clocks = <&cpu_clk>;
+	};
+
+	soc100 {
+		#address-cells	= <1>;
+		#size-cells	= <1>;
+		device_type	= "soc";
+		ranges		= <0xfe000000 0xfe000000 0x02000000
+				0x000F0000 0x000F0000 0x00010000>;
+		compatible	= "abilis,tb10x", "simple-bus";
+
+		pll0: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "pll0";
+		};
+		cpu_clk: clkdiv_cpu {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&pll0>;
+			clock-output-names = "cpu_clk";
+		};
+		ahb_clk: clkdiv_ahb {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&pll0>;
+			clock-output-names = "ahb_clk";
+		};
+
+		iomux: iomux@FF10601c {
+			compatible = "abilis,tb10x-iomux";
+			#gpio-range-cells = <3>;
+			reg = <0xFF10601c 0x4>;
+		};
+
+		intc: interrupt-controller {
+			compatible = "snps,arc700-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+		tb10x_ictl: pic@fe002000 {
+			compatible = "abilis,tb10x-ictl";
+			reg = <0xFE002000 0x20>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupts = <5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
+					20 21 22 23 24 25 26 27 28 29 30 31>;
+		};
+
+		uart@FF100000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xFF100000 0x100>;
+			clock-frequency = <166666666>;
+			interrupts = <25 8>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupt-parent = <&tb10x_ictl>;
+		};
+		ethernet@FE100000 {
+			compatible = "snps,dwmac-3.70a","snps,dwmac";
+			reg = <0xFE100000 0x1058>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <6 8>;
+			interrupt-names = "macirq";
+			clocks = <&ahb_clk>;
+			clock-names = "stmmaceth";
+		};
+		dma@FE000000 {
+			compatible = "snps,dma-spear1340";
+			reg = <0xFE000000 0x400>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <14 8>;
+			dma-channels = <6>;
+			dma-requests = <0>;
+			dma-masters = <1>;
+			#dma-cells = <3>;
+			chan_allocation_order = <0>;
+			chan_priority = <1>;
+			block_size = <0x7ff>;
+			data-width = <4>;
+			clocks = <&ahb_clk>;
+			clock-names = "hclk";
+			multi-block = <1 1 1 1 1 1>;
+		};
+
+		i2c0: i2c@FF120000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xFF120000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 8>;
+			clocks = <&ahb_clk>;
+		};
+		i2c1: i2c@FF121000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xFF121000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 8>;
+			clocks = <&ahb_clk>;
+		};
+		i2c2: i2c@FF122000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xFF122000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 8>;
+			clocks = <&ahb_clk>;
+		};
+		i2c3: i2c@FF123000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xFF123000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 8>;
+			clocks = <&ahb_clk>;
+		};
+		i2c4: i2c@FF124000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xFF124000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 8>;
+			clocks = <&ahb_clk>;
+		};
+
+		spi0: spi@0xFE010000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "abilis,tb100-spi";
+			num-cs = <1>;
+			reg = <0xFE010000 0x20>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <26 8>;
+			clocks = <&ahb_clk>;
+		};
+		spi1: spi@0xFE011000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "abilis,tb100-spi";
+			num-cs = <2>;
+			reg = <0xFE011000 0x20>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <10 8>;
+			clocks = <&ahb_clk>;
+		};
+
+		tb10x_tsm: tb10x-tsm@ff316000 {
+			compatible = "abilis,tb100-tsm";
+			reg = <0xff316000 0x400>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <17 8>;
+			output-clkdiv = <4>;
+			global-packet-delay = <0x21>;
+			port-packet-delay = <0>;
+		};
+		tb10x_stream_proc: tb10x-stream-proc {
+			compatible = "abilis,tb100-streamproc";
+			reg =   <0xfff00000 0x200>,
+				<0x000f0000 0x10000>,
+				<0xfff00200 0x105>,
+				<0xff10600c 0x1>,
+				<0xfe001018 0x1>;
+			reg-names =     "mbox",
+					"sp_iccm",
+					"mbox_irq",
+					"cpuctrl",
+					"a6it_int_force";
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <20 2>, <19 2>;
+			interrupt-names = "cmd_irq", "event_irq";
+		};
+		tb10x_mdsc0: tb10x-mdscr@FF300000 {
+			compatible = "abilis,tb100-mdscr";
+			reg = <0xFF300000 0x7000>;
+			tb100-mdscr-manage-tsin;
+		};
+		tb10x_mscr0: tb10x-mdscr@FF307000 {
+			compatible = "abilis,tb100-mdscr";
+			reg = <0xFF307000 0x7000>;
+		};
+		tb10x_scr0: tb10x-mdscr@ff30e000 {
+			compatible = "abilis,tb100-mdscr";
+			reg = <0xFF30e000 0x4000>;
+			tb100-mdscr-manage-tsin;
+		};
+		tb10x_scr1: tb10x-mdscr@ff312000 {
+			compatible = "abilis,tb100-mdscr";
+			reg = <0xFF312000 0x4000>;
+			tb100-mdscr-manage-tsin;
+		};
+		tb10x_wfb: tb10x-wfb@ff319000 {
+			compatible = "abilis,tb100-wfb";
+			reg = <0xff319000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <16 8>;
+		};
+	};
+};
diff --git a/src/arc/axc001.dtsi b/src/arc/axc001.dtsi
new file mode 100644
index 000000000000..53ce226f77a5
--- /dev/null
+++ b/src/arc/axc001.dtsi
@@ -0,0 +1,125 @@
+/*
+ * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Device tree for AXC001 770D/EM6/AS221 CPU card
+ * Note that this file only supports the 770D CPU
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "snps,arc";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpu_card {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x00000000 0xf0000000 0x10000000>;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <750000000>;
+		};
+
+		core_intc: arc700-intc@cpu {
+			compatible = "snps,arc700-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		/*
+		 * this GPIO block ORs all interrupts on CPU card (creg,..)
+		 * to uplink only 1 IRQ to ARC core intc
+		 */
+		dw-apb-gpio@0x2000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = < 0x2000 0x80 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ictl_intc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <30>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupt-parent = <&core_intc>;
+				interrupts = <15>;
+			};
+		};
+
+		debug_uart: dw-apb-uart@0x5000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x5000 0x100>;
+			clock-frequency = <33333000>;
+			interrupt-parent = <&ictl_intc>;
+			interrupts = <19 4>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,arc700-pct";
+		};
+	};
+
+	/*
+	 * This INTC is actually connected to DW APB GPIO
+	 * which acts as a wire between MB INTC and CPU INTC.
+	 * GPIO INTC is configured in platform init code
+	 * and here we mimic direct connection from MB INTC to
+	 * CPU INTC, thus we set "interrupts = <7>" instead of
+	 * "interrupts = <12>"
+	 *
+	 * This intc actually resides on MB, but we move it here to
+	 * avoid duplicating the MB dtsi file given that IRQ from
+	 * this intc to cpu intc are different for axs101 and axs103
+	 */
+	mb_intc: dw-apb-ictl@0xe0012000 {
+		#interrupt-cells = <1>;
+		compatible = "snps,dw-apb-ictl";
+		reg = < 0xe0012000 0x200 >;
+		interrupt-controller;
+		interrupt-parent = <&core_intc>;
+		interrupts = < 7 >;
+	};
+
+	memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x80000000 0x20000000>;
+		device_type = "memory";
+		reg = <0x80000000 0x1b000000>;	/* (512 - 32) MiB */
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		/*
+		 * We just move frame buffer area to the very end of
+		 * available DDR. And even though in case of ARC770 there's
+		 * no strict requirement for a frame-buffer to be in any
+		 * particular location it allows us to use the same
+		 * base board's DT node for ARC PGU as for ARc HS38.
+		 */
+		frame_buffer: frame_buffer@9e000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x9e000000 0x2000000>;
+			no-map;
+		};
+	};
+};
diff --git a/src/arc/axc003.dtsi b/src/arc/axc003.dtsi
new file mode 100644
index 000000000000..14df46f141bf
--- /dev/null
+++ b/src/arc/axc003.dtsi
@@ -0,0 +1,124 @@
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Device tree for AXC003 CPU card: HS38x UP configuration
+ */
+
+/include/ "skeleton_hs.dtsi"
+
+/ {
+	compatible = "snps,arc";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpu_card {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x00000000 0xf0000000 0x10000000>;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <90000000>;
+		};
+
+		core_intc: archs-intc@cpu {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		/*
+		 * this GPIO block ORs all interrupts on CPU card (creg,..)
+		 * to uplink only 1 IRQ to ARC core intc
+		 */
+		dw-apb-gpio@0x2000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = < 0x2000 0x80 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ictl_intc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <30>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupt-parent = <&core_intc>;
+				interrupts = <25>;
+			};
+		};
+
+		debug_uart: dw-apb-uart@0x5000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x5000 0x100>;
+			clock-frequency = <33333000>;
+			interrupt-parent = <&ictl_intc>;
+			interrupts = <2 4>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,archs-pct";
+			#interrupt-cells = <1>;
+			interrupt-parent = <&core_intc>;
+			interrupts = <20>;
+		};
+	};
+
+	/*
+	 * The DW APB ICTL intc on MB is connected to CPU intc via a
+	 * DT "invisible" DW APB GPIO block, configured to simply pass thru
+	 * interrupts - setup accordinly in platform init (plat-axs10x/ax10x.c)
+	 *
+	 * So here we mimic a direct connection betwen them, ignoring the
+	 * ABPG GPIO. Thus set "interrupts = <24>" (DW APB GPIO to core)
+	 * instead of "interrupts = <12>" (DW APB ICTL to DW APB GPIO)
+	 *
+	 * This intc actually resides on MB, but we move it here to
+	 * avoid duplicating the MB dtsi file given that IRQ from
+	 * this intc to cpu intc are different for axs101 and axs103
+	 */
+	mb_intc: dw-apb-ictl@0xe0012000 {
+		#interrupt-cells = <1>;
+		compatible = "snps,dw-apb-ictl";
+		reg = < 0xe0012000 0x200 >;
+		interrupt-controller;
+		interrupt-parent = <&core_intc>;
+		interrupts = < 24 >;
+	};
+
+	memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x80000000 0x40000000>;
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;	/* 512MiB */
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		/*
+		 * Move frame buffer out of IOC aperture (0x8z-0xAz).
+		 */
+		frame_buffer: frame_buffer@be000000 {
+			compatible = "shared-dma-pool";
+			reg = <0xbe000000 0x2000000>;
+			no-map;
+		};
+	};
+};
diff --git a/src/arc/axc003_idu.dtsi b/src/arc/axc003_idu.dtsi
new file mode 100644
index 000000000000..3d6cfa32bf51
--- /dev/null
+++ b/src/arc/axc003_idu.dtsi
@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) 2014, 2015 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Device tree for AXC003 CPU card: HS38x2 (Dual Core) with IDU intc
+ */
+
+/include/ "skeleton_hs_idu.dtsi"
+
+/ {
+	compatible = "snps,arc";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpu_card {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x00000000 0xf0000000 0x10000000>;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <100000000>;
+		};
+
+		core_intc: archs-intc@cpu {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		idu_intc: idu-interrupt-controller {
+			compatible = "snps,archs-idu-intc";
+			interrupt-controller;
+			interrupt-parent = <&core_intc>;
+
+			/*
+			 * <hwirq  distribution>
+			 * distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
+			 */
+			#interrupt-cells = <2>;
+
+			/*
+			 * upstream irqs to core intc - downstream these are
+			 * "COMMON" irq 0,1..
+			 */
+			interrupts = <24 25>;
+		};
+
+		/*
+		 * this GPIO block ORs all interrupts on CPU card (creg,..)
+		 * to uplink only 1 IRQ to ARC core intc
+		 */
+		dw-apb-gpio@0x2000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = < 0x2000 0x80 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ictl_intc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <30>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupt-parent = <&idu_intc>;
+
+				/*
+				 * cmn irq 1 -> cpu irq 25
+				 * Distribute to cpu0 only
+				 */
+				interrupts = <1 1>;
+			};
+		};
+
+		debug_uart: dw-apb-uart@0x5000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x5000 0x100>;
+			clock-frequency = <33333000>;
+			interrupt-parent = <&ictl_intc>;
+			interrupts = <2 4>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,archs-pct";
+			#interrupt-cells = <1>;
+			interrupt-parent = <&core_intc>;
+			interrupts = <20>;
+		};
+	};
+
+	/*
+	 * This INTC is actually connected to DW APB GPIO
+	 * which acts as a wire between MB INTC and CPU INTC.
+	 * GPIO INTC is configured in platform init code
+	 * and here we mimic direct connection from MB INTC to
+	 * CPU INTC, thus we set "interrupts = <0 1>" instead of
+	 * "interrupts = <12>"
+	 *
+	 * This intc actually resides on MB, but we move it here to
+	 * avoid duplicating the MB dtsi file given that IRQ from
+	 * this intc to cpu intc are different for axs101 and axs103
+	 */
+	mb_intc: dw-apb-ictl@0xe0012000 {
+		#interrupt-cells = <1>;
+		compatible = "snps,dw-apb-ictl";
+		reg = < 0xe0012000 0x200 >;
+		interrupt-controller;
+		interrupt-parent = <&idu_intc>;
+		interrupts = <0 1>;	/* cmn irq 0 -> cpu irq 24
+					   distribute to cpu0 only */
+	};
+
+	memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x80000000 0x40000000>;
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;	/* 512MiB */
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		/*
+		 * Move frame buffer out of IOC aperture (0x8z-0xAz).
+		 */
+		frame_buffer: frame_buffer@be000000 {
+			compatible = "shared-dma-pool";
+			reg = <0xbe000000 0x2000000>;
+			no-map;
+		};
+	};
+};
diff --git a/src/arc/axs101.dts b/src/arc/axs101.dts
new file mode 100644
index 000000000000..70aec7d6ca60
--- /dev/null
+++ b/src/arc/axs101.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
+ *
+ * ARC AXS101 S/W development platform
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "axc001.dtsi"
+/include/ "axs10x_mb.dtsi"
+
+/ {
+	model = "snps,axs101";
+	compatible = "snps,axs101", "snps,arc-sdp";
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 video=1280x720@60";
+	};
+};
diff --git a/src/arc/axs103.dts b/src/arc/axs103.dts
new file mode 100644
index 000000000000..ec7fb277a067
--- /dev/null
+++ b/src/arc/axs103.dts
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Device Tree for AXS103 SDP with AXS10X Main Board and
+ * AXC003 FPGA Card (with UP bitfile)
+ */
+/dts-v1/;
+
+/include/ "axc003.dtsi"
+/include/ "axs10x_mb.dtsi"
+
+/ {
+	model = "snps,axs103";
+	compatible = "snps,axs103", "snps,arc-sdp";
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=ttyS3,115200n8 debug print-fatal-signals=1";
+	};
+};
diff --git a/src/arc/axs103_idu.dts b/src/arc/axs103_idu.dts
new file mode 100644
index 000000000000..5c843d9b4ac8
--- /dev/null
+++ b/src/arc/axs103_idu.dts
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Device Tree for AXS103 SDP with AXS10X Main Board and
+ * AXC003 FPGA Card (with SMP bitfile)
+ */
+/dts-v1/;
+
+/include/ "axc003_idu.dtsi"
+/include/ "axs10x_mb.dtsi"
+
+/ {
+	model = "snps,axs103-smp";
+	compatible = "snps,axs103", "snps,arc-sdp";
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 print-fatal-signals=1 consoleblank=0 video=1280x720@60";
+	};
+};
diff --git a/src/arc/axs10x_mb.dtsi b/src/arc/axs10x_mb.dtsi
new file mode 100644
index 000000000000..d6c1bbc98ac3
--- /dev/null
+++ b/src/arc/axs10x_mb.dtsi
@@ -0,0 +1,299 @@
+/*
+ * Support for peripherals on the AXS10x mainboard
+ *
+ * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	axs10x_mb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0xe0000000 0x10000000>;
+		interrupt-parent = <&mb_intc>;
+
+		i2sclk: i2sclk@100a0 {
+			compatible = "snps,axs10x-i2s-pll-clock";
+			reg = <0x100a0 0x10>;
+			clocks = <&i2spll_clk>;
+			#clock-cells = <0>;
+		};
+
+		clocks {
+			i2spll_clk: i2spll_clk {
+				compatible = "fixed-clock";
+				clock-frequency = <27000000>;
+				#clock-cells = <0>;
+			};
+
+			i2cclk: i2cclk {
+				compatible = "fixed-clock";
+				clock-frequency = <50000000>;
+				#clock-cells = <0>;
+			};
+
+			apbclk: apbclk {
+				compatible = "fixed-clock";
+				clock-frequency = <50000000>;
+				#clock-cells = <0>;
+			};
+
+			mmcclk: mmcclk {
+				compatible = "fixed-clock";
+				clock-frequency = <50000000>;
+				#clock-cells = <0>;
+			};
+
+			pguclk: pguclk {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <74440000>;
+			};
+		};
+
+		ethernet@0x18000 {
+			#interrupt-cells = <1>;
+			compatible = "snps,dwmac";
+			reg = < 0x18000 0x2000 >;
+			interrupts = < 4 >;
+			interrupt-names = "macirq";
+			phy-mode = "rgmii";
+			snps,pbl = < 32 >;
+			clocks = <&apbclk>;
+			clock-names = "stmmaceth";
+			max-speed = <100>;
+		};
+
+		ehci@0x40000 {
+			compatible = "generic-ehci";
+			reg = < 0x40000 0x100 >;
+			interrupts = < 8 >;
+		};
+
+		ohci@0x60000 {
+			compatible = "generic-ohci";
+			reg = < 0x60000 0x100 >;
+			interrupts = < 8 >;
+		};
+
+		/*
+		 * According to DW Mobile Storage databook it is required
+		 * to use  "Hold Register" if card is enumerated in SDR12 or
+		 * SDR25 modes.
+		 *
+		 * Utilization of "Hold Register" is already implemented via
+		 * dw_mci_pltfm_prepare_command() which in its turn gets
+		 * used through dw_mci_drv_data->prepare_command call-back.
+		 * This call-back is used in Altera Socfpga platform and so
+		 * we may reuse it saying that we're compatible with their
+		 * "altr,socfpga-dw-mshc".
+		 *
+		 * Most probably "Hold Register" utilization is platform-
+		 * independent requirement which means that single unified
+		 * "snps,dw-mshc" should be enough for all users of DW MMC once
+		 * dw_mci_pltfm_prepare_command() is used in generic platform
+		 * code.
+		 */
+		mmc@0x15000 {
+			compatible = "altr,socfpga-dw-mshc";
+			reg = < 0x15000 0x400 >;
+			num-slots = < 1 >;
+			fifo-depth = < 16 >;
+			card-detect-delay = < 200 >;
+			clocks = <&apbclk>, <&mmcclk>;
+			clock-names = "biu", "ciu";
+			interrupts = < 7 >;
+			bus-width = < 4 >;
+		};
+
+		uart@0x20000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x20000 0x100>;
+			clock-frequency = <33333333>;
+			interrupts = <17>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		uart@0x21000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x21000 0x100>;
+			clock-frequency = <33333333>;
+			interrupts = <18>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		/* UART muxed with USB data port (ttyS3) */
+		uart@0x22000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x22000 0x100>;
+			clock-frequency = <33333333>;
+			interrupts = <19>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		i2c@0x1d000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x1d000 0x100>;
+			clock-frequency = <400000>;
+			clocks = <&i2cclk>;
+			interrupts = <14>;
+		};
+
+		i2c@0x1e000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x1e000 0x100>;
+			clock-frequency = <400000>;
+			clocks = <&i2cclk>;
+			interrupts = <15>;
+		};
+
+		i2c@0x1f000 {
+			compatible = "snps,designware-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1f000 0x100>;
+			clock-frequency = <400000>;
+			clocks = <&i2cclk>;
+			interrupts = <16>;
+
+			adv7511:adv7511@39{
+				compatible="adi,adv7511";
+				reg = <0x39>;
+				interrupts = <23>;
+				adi,input-depth = <8>;
+				adi,input-colorspace = "rgb";
+				adi,input-clock = "1x";
+				adi,clock-delay = <0x03>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					/* RGB/YUV input */
+					port@0 {
+						reg = <0>;
+						adv7511_input:endpoint {
+						remote-endpoint = <&pgu_output>;
+						};
+					};
+
+					/* HDMI output */
+					port@1 {
+						reg = <1>;
+						adv7511_output: endpoint {
+							remote-endpoint = <&hdmi_connector_in>;
+						};
+					};
+				};
+			};
+
+			eeprom@0x54{
+				compatible = "24c01";
+				reg = <0x54>;
+				pagesize = <0x8>;
+			};
+
+			eeprom@0x57{
+				compatible = "24c04";
+				reg = <0x57>;
+				pagesize = <0x8>;
+			};
+		};
+
+		hdmi0: connector {
+			compatible = "hdmi-connector";
+			type = "a";
+			port {
+				hdmi_connector_in: endpoint {
+					remote-endpoint = <&adv7511_output>;
+				};
+			};
+		};
+
+		gpio0:gpio@13000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x13000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio0_banka: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+			};
+
+			gpio0_bankb: gpio-controller@1 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <8>;
+				reg = <1>;
+			};
+
+			gpio0_bankc: gpio-controller@2 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <8>;
+				reg = <2>;
+			};
+		};
+
+		gpio1:gpio@14000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x14000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio1_banka: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <30>;
+				reg = <0>;
+			};
+
+			gpio1_bankb: gpio-controller@1 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <10>;
+				reg = <1>;
+			};
+
+			gpio1_bankc: gpio-controller@2 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <8>;
+				reg = <2>;
+			};
+		};
+
+		pgu@17000 {
+			compatible = "snps,arcpgu";
+			reg = <0x17000 0x400>;
+			encoder-slave = <&adv7511>;
+			clocks = <&pguclk>;
+			clock-names = "pxlclk";
+			memory-region = <&frame_buffer>;
+			port {
+				pgu_output: endpoint {
+					remote-endpoint = <&adv7511_input>;
+				};
+			};
+		};
+	};
+};
diff --git a/src/arc/eznps.dts b/src/arc/eznps.dts
new file mode 100644
index 000000000000..1e0d225791c1
--- /dev/null
+++ b/src/arc/eznps.dts
@@ -0,0 +1,95 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "ezchip,arc-nps";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+	present-cpus = "0-1,16-17";
+	possible-cpus = "0-4095";
+
+	aliases {
+		ethernet0 = &gmac0;
+	};
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32be,0xf7209000,115200n8 console=ttyS0,115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;	/* 512M */
+	};
+
+	clocks {
+		sysclk: sysclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <83333333>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* child and parent address space 1:1 mapped */
+		ranges;
+
+		intc: interrupt-controller {
+			compatible = "ezchip,nps400-ic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		timer0: timer_clkevt {
+			compatible = "snps,arc-timer";
+			interrupts = <3>;
+			clocks = <&sysclk>;
+		};
+
+		timer1: timer_clksrc {
+			compatible = "ezchip,nps400-timer";
+			clocks = <&sysclk>;
+			clock-names="sysclk";
+		};
+
+		uart@f7209000 {
+			compatible = "snps,dw-apb-uart";
+			device_type = "serial";
+			reg = <0xf7209000 0x100>;
+			interrupts = <6>;
+			clocks = <&sysclk>;
+			clock-names="baudclk";
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			native-endian;
+		};
+
+		gmac0: ethernet@f7470000 {
+			compatible = "ezchip,nps-mgt-enet";
+			reg = <0xf7470000 0x1940>;
+			interrupts = <7>;
+			/* Filled in by U-Boot */
+			mac-address = [ 00 C0 00 F0 04 03 ];
+		};
+	};
+};
diff --git a/src/arc/haps_hs.dts b/src/arc/haps_hs.dts
new file mode 100644
index 000000000000..1c1324e84965
--- /dev/null
+++ b/src/arc/haps_hs.dts
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2016-2014 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "skeleton_hs.dtsi"
+
+/ {
+	model = "snps,zebu_hs";
+	compatible = "snps,zebu_hs";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&core_intc>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;	/* 512 */
+	};
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* child and parent address space 1:1 mapped */
+		ranges;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+
+		core_intc: interrupt-controller {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart0: serial@f0000000 {
+			compatible = "ns8250";
+			reg = <0xf0000000 0x2000>;
+			interrupts = <24>;
+			clock-frequency = <50000000>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			no-loopback-test = <1>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,archs-pct";
+			#interrupt-cells = <1>;
+			interrupts = <20>;
+		};
+	};
+};
diff --git a/src/arc/haps_hs_idu.dts b/src/arc/haps_hs_idu.dts
new file mode 100644
index 000000000000..65204b4c0f13
--- /dev/null
+++ b/src/arc/haps_hs_idu.dts
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2016-2014 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "skeleton_hs_idu.dtsi"
+
+/ {
+	model = "snps,zebu_hs-smp";
+	compatible = "snps,zebu_hs";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&core_intc>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;	/* 512 */
+	};
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 debug";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* child and parent address space 1:1 mapped */
+		ranges;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;	/* 50 MHZ */
+		};
+
+		core_intc: interrupt-controller {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+/*			interrupts = <16 17 18 19 20 21 22 23 24 25>; */
+		};
+
+		idu_intc: idu-interrupt-controller {
+			compatible = "snps,archs-idu-intc";
+			interrupt-controller;
+			interrupt-parent = <&core_intc>;
+			/* <hwirq  distribution>
+			distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3 */
+			#interrupt-cells = <2>;
+			interrupts = <24 25 26 27 28 29 30 31>;
+
+		};
+
+		uart0: serial@f0000000 {
+			/* compatible = "ns8250"; Doesn't use FIFOs */
+			compatible = "ns16550a";
+			reg = <0xf0000000 0x2000>;
+			interrupt-parent = <&idu_intc>;
+			/* interrupts = <0 1>;  DEST=1*/
+			/* interrupts = <0 2>;  DEST=2*/
+			interrupts = <0 0>;  /* RR*/
+			clock-frequency = <50000000>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			no-loopback-test = <1>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,archs-pct";
+			#interrupt-cells = <1>;
+			interrupts = <20>;
+		};
+	};
+};
diff --git a/src/arc/nsim_700.dts b/src/arc/nsim_700.dts
new file mode 100644
index 000000000000..5ee96b067c08
--- /dev/null
+++ b/src/arc/nsim_700.dts
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "snps,nsim";
+	compatible = "snps,nsim";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&core_intc>;
+
+	chosen {
+		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8";
+	};
+
+	aliases {
+		serial0 = &arcuart0;
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* child and parent address space 1:1 mapped */
+		ranges;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <80000000>;
+		};
+
+		core_intc: interrupt-controller {
+			compatible = "snps,arc700-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		arcuart0: serial@c0fc1000 {
+			compatible = "snps,arc-uart";
+			reg = <0xc0fc1000 0x100>;
+			interrupts = <5>;
+			clock-frequency = <80000000>;
+			current-speed = <115200>;
+			status = "okay";
+		};
+
+		ethernet@c0fc2000 {
+			compatible = "snps,arc-emac";
+			reg = <0xc0fc2000 0x3c>;
+			interrupts = <6>;
+			mac-address = [ 00 11 22 33 44 55 ];
+			clock-frequency = <80000000>;
+			max-speed = <100>;
+			phy = <&phy0>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy0: ethernet-phy@0 {
+				reg = <1>;
+			};
+		};
+
+		arcpct0: pct {
+			compatible = "snps,arc700-pct";
+		};
+	};
+};
diff --git a/src/arc/nsim_hs.dts b/src/arc/nsim_hs.dts
new file mode 100644
index 000000000000..3772c40c245e
--- /dev/null
+++ b/src/arc/nsim_hs.dts
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "skeleton_hs.dtsi"
+
+/ {
+	model = "snps,nsim_hs";
+	compatible = "snps,nsim_hs";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&core_intc>;
+
+	memory {
+		device_type = "memory";
+		/* CONFIG_LINUX_LINK_BASE needs to match low mem start */
+		reg = <0x0 0x80000000 0x0 0x20000000	/* 512 MB low mem */
+		       0x1 0x00000000 0x0 0x40000000>;	/* 1 GB highmem */
+	};
+
+	chosen {
+		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8";
+	};
+
+	aliases {
+		serial0 = &arcuart0;
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* only perip space at end of low mem accessible
+			 bus addr,   parent bus addr, size */
+		ranges = <0x80000000 0x0 0x80000000 0x80000000>;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <80000000>;
+		};
+
+		core_intc: core-interrupt-controller {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		arcuart0: serial@c0fc1000 {
+			compatible = "snps,arc-uart";
+			reg = <0xc0fc1000 0x100>;
+			interrupts = <24>;
+			clock-frequency = <80000000>;
+			current-speed = <115200>;
+			status = "okay";
+		};
+
+		arcpct0: pct {
+			compatible = "snps,archs-pct";
+			#interrupt-cells = <1>;
+			interrupts = <20>;
+		};
+	};
+};
diff --git a/src/arc/nsim_hs_idu.dts b/src/arc/nsim_hs_idu.dts
new file mode 100644
index 000000000000..48434d7c4498
--- /dev/null
+++ b/src/arc/nsim_hs_idu.dts
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "skeleton_hs_idu.dtsi"
+
+/ {
+	model = "snps,nsim_hs-smp";
+	compatible = "snps,nsim_hs";
+	interrupt-parent = <&core_intc>;
+
+	chosen {
+		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8";
+	};
+
+	aliases {
+		serial0 = &arcuart0;
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* child and parent address space 1:1 mapped */
+		ranges;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <80000000>;
+		};
+
+		core_intc: core-interrupt-controller {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		idu_intc: idu-interrupt-controller {
+			compatible = "snps,archs-idu-intc";
+			interrupt-controller;
+			interrupt-parent = <&core_intc>;
+
+			/*
+			 * <hwirq  distribution>
+			 * distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
+			 */
+			#interrupt-cells = <2>;
+
+			/*
+			 * upstream irqs to core intc - downstream these are
+			 * "COMMON" irq 0,1..
+			 */
+			interrupts = <24 25 26 27 28 29 30 31>;
+		};
+
+		arcuart0: serial@c0fc1000 {
+			compatible = "snps,arc-uart";
+			reg = <0xc0fc1000 0x100>;
+			interrupt-parent = <&idu_intc>;
+			interrupts = <0 0>;
+			clock-frequency = <80000000>;
+			current-speed = <115200>;
+			status = "okay";
+		};
+
+		arcpct0: pct {
+			compatible = "snps,archs-pct";
+			#interrupt-cells = <1>;
+			interrupts = <20>;
+		};
+	};
+};
diff --git a/src/arc/nsimosci.dts b/src/arc/nsimosci.dts
new file mode 100644
index 000000000000..3c391ba565ed
--- /dev/null
+++ b/src/arc/nsimosci.dts
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "snps,nsimosci";
+	compatible = "snps,nsimosci";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&core_intc>;
+
+	chosen {
+		/* this is for console on PGU */
+		/* bootargs = "console=tty0 consoleblank=0"; */
+		/* this is for console on serial */
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* child and parent address space 1:1 mapped */
+		ranges;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <20000000>;
+		};
+
+		core_intc: interrupt-controller {
+			compatible = "snps,arc700-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart0: serial@f0000000 {
+			compatible = "ns8250";
+			reg = <0xf0000000 0x2000>;
+			interrupts = <11>;
+			clock-frequency = <3686400>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			no-loopback-test = <1>;
+		};
+
+		pguclk: pguclk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25175000>;
+		};
+
+		pgu@f9000000 {
+			compatible = "snps,arcpgu";
+			reg = <0xf9000000 0x400>;
+			clocks = <&pguclk>;
+			clock-names = "pxlclk";
+		};
+
+		ps2: ps2@f9001000 {
+			compatible = "snps,arc_ps2";
+			reg = <0xf9000400 0x14>;
+			interrupts = <13>;
+			interrupt-names = "arc_ps2_irq";
+		};
+
+		eth0: ethernet@f0003000 {
+			compatible = "ezchip,nps-mgt-enet";
+			reg = <0xf0003000 0x44>;
+			interrupts = <7>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,arc700-pct";
+		};
+	};
+};
diff --git a/src/arc/nsimosci_hs.dts b/src/arc/nsimosci_hs.dts
new file mode 100644
index 000000000000..14a727cbf4c9
--- /dev/null
+++ b/src/arc/nsimosci_hs.dts
@@ -0,0 +1,93 @@
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "skeleton_hs.dtsi"
+
+/ {
+	model = "snps,nsimosci_hs";
+	compatible = "snps,nsimosci_hs";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&core_intc>;
+
+	chosen {
+		/* this is for console on PGU */
+		/* bootargs = "console=tty0 consoleblank=0"; */
+		/* this is for console on serial */
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* child and parent address space 1:1 mapped */
+		ranges;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <20000000>;
+		};
+
+		core_intc: core-interrupt-controller {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart0: serial@f0000000 {
+			compatible = "ns8250";
+			reg = <0xf0000000 0x2000>;
+			interrupts = <24>;
+			clock-frequency = <3686400>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			no-loopback-test = <1>;
+		};
+
+		pguclk: pguclk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25175000>;
+		};
+
+		pgu@f9000000 {
+			compatible = "snps,arcpgu";
+			reg = <0xf9000000 0x400>;
+			clocks = <&pguclk>;
+			clock-names = "pxlclk";
+		};
+
+		ps2: ps2@f9001000 {
+			compatible = "snps,arc_ps2";
+			reg = <0xf9000400 0x14>;
+			interrupts = <27>;
+			interrupt-names = "arc_ps2_irq";
+		};
+
+		eth0: ethernet@f0003000 {
+			compatible = "ezchip,nps-mgt-enet";
+			reg = <0xf0003000 0x44>;
+			interrupts = <25>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,archs-pct";
+			#interrupt-cells = <1>;
+			interrupts = <20>;
+		};
+	};
+};
diff --git a/src/arc/nsimosci_hs_idu.dts b/src/arc/nsimosci_hs_idu.dts
new file mode 100644
index 000000000000..cbf65b6cc7c6
--- /dev/null
+++ b/src/arc/nsimosci_hs_idu.dts
@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "skeleton_hs_idu.dtsi"
+
+/ {
+	model = "snps,nsimosci_hs-smp";
+	compatible = "snps,nsimosci_hs";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&core_intc>;
+
+	chosen {
+		/* this is for console on serial */
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblan=0 debug video=640x480-24";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* child and parent address space 1:1 mapped */
+		ranges;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <5000000>;
+		};
+
+		core_intc: core-interrupt-controller {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+/*			interrupts = <16 17 18 19 20 21 22 23 24 25>; */
+		};
+
+		idu_intc: idu-interrupt-controller {
+			compatible = "snps,archs-idu-intc";
+			interrupt-controller;
+			interrupt-parent = <&core_intc>;
+
+			/*
+			 * <hwirq  distribution>
+			 * distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
+			 */
+			#interrupt-cells = <2>;
+
+			/*
+			 * upstream irqs to core intc - downstream these are
+			 * "COMMON" irq 0,1..
+			 */
+			interrupts = <24 25 26 27 28 29 30 31>;
+		};
+
+		uart0: serial@f0000000 {
+			compatible = "ns8250";
+			reg = <0xf0000000 0x2000>;
+			interrupt-parent = <&idu_intc>;
+			interrupts = <0 0>; /* cmn irq 0 -> cpu irq 24
+						RR distribute to all cpus */
+			clock-frequency = <3686400>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			no-loopback-test = <1>;
+		};
+
+		pguclk: pguclk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25175000>;
+		};
+
+		pgu@f9000000 {
+			compatible = "snps,arcpgu";
+			reg = <0xf9000000 0x400>;
+			clocks = <&pguclk>;
+			clock-names = "pxlclk";
+		};
+
+		ps2: ps2@f9001000 {
+			compatible = "snps,arc_ps2";
+			reg = <0xf9000400 0x14>;
+			interrupts = <3 0>;
+			interrupt-parent = <&idu_intc>;
+			interrupt-names = "arc_ps2_irq";
+		};
+
+		eth0: ethernet@f0003000 {
+			compatible = "ezchip,nps-mgt-enet";
+			reg = <0xf0003000 0x44>;
+			interrupt-parent = <&idu_intc>;
+			interrupts = <1 2>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,archs-pct";
+			#interrupt-cells = <1>;
+			interrupts = <20>;
+		};
+	};
+};
diff --git a/src/arc/skeleton.dtsi b/src/arc/skeleton.dtsi
new file mode 100644
index 000000000000..65808fe0a290
--- /dev/null
+++ b/src/arc/skeleton.dtsi
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Skeleton device tree; the bare minimum needed to boot; just include and
+ * add a compatible value.
+ */
+
+/ {
+	compatible = "snps,arc";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+	aliases { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "snps,arc770d";
+			reg = <0>;
+		};
+	};
+
+	/* TIMER0 with interrupt for clockevent */
+	timer0 {
+		compatible = "snps,arc-timer";
+		interrupts = <3>;
+		interrupt-parent = <&core_intc>;
+		clocks = <&core_clk>;
+	};
+
+	/* TIMER1 for free running clocksource */
+	timer1 {
+		compatible = "snps,arc-timer";
+		clocks = <&core_clk>;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;	/* 256M */
+	};
+};
diff --git a/src/arc/skeleton_hs.dtsi b/src/arc/skeleton_hs.dtsi
new file mode 100644
index 000000000000..2dfe8037dfbb
--- /dev/null
+++ b/src/arc/skeleton_hs.dtsi
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	compatible = "snps,arc";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+	aliases { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <0>;
+		};
+	};
+
+	/* TIMER0 with interrupt for clockevent */
+	timer0 {
+		compatible = "snps,arc-timer";
+		interrupts = <16>;
+		interrupt-parent = <&core_intc>;
+		clocks = <&core_clk>;
+	};
+
+	/* 64-bit Local RTC: preferred clocksource for UP */
+	rtc {
+		compatible = "snps,archs-timer-rtc";
+		clocks = <&core_clk>;
+	};
+
+	/* TIMER1 for free running clocksource: Fallback if rtc not found */
+	timer1 {
+		compatible = "snps,arc-timer";
+		clocks = <&core_clk>;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;	/* 256M */
+	};
+};
diff --git a/src/arc/skeleton_hs_idu.dtsi b/src/arc/skeleton_hs_idu.dtsi
new file mode 100644
index 000000000000..4c11079f3565
--- /dev/null
+++ b/src/arc/skeleton_hs_idu.dtsi
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	compatible = "snps,arc";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+	aliases { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "snps,archs38xN";
+			reg = <0>;
+		};
+	};
+
+	/* TIMER0 with interrupt for clockevent */
+	timer0 {
+		compatible = "snps,arc-timer";
+		interrupts = <16>;
+		interrupt-parent = <&core_intc>;
+		clocks = <&core_clk>;
+	};
+
+	/* 64-bit Global Free Running Counter */
+	gfrc {
+		compatible = "snps,archs-timer-gfrc";
+		clocks = <&core_clk>;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;	/* 256M */
+	};
+};
diff --git a/src/arc/vdk_axc003.dtsi b/src/arc/vdk_axc003.dtsi
new file mode 100644
index 000000000000..0fd6ba985b16
--- /dev/null
+++ b/src/arc/vdk_axc003.dtsi
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2013, 2014 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Device tree for AXC003 CPU card: HS38x UP configuration (VDK version)
+ */
+
+/include/ "skeleton_hs.dtsi"
+
+/ {
+	compatible = "snps,arc";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpu_card {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x00000000 0xf0000000 0x10000000>;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+
+		core_intc: archs-intc@cpu {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		debug_uart: dw-apb-uart@0x5000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x5000 0x100>;
+			clock-frequency = <2403200>;
+			interrupt-parent = <&core_intc>;
+			interrupts = <19>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+	};
+
+	mb_intc: dw-apb-ictl@0xe0012000 {
+		#interrupt-cells = <1>;
+		compatible = "snps,dw-apb-ictl";
+		reg = < 0xe0012000 0x200 >;
+		interrupt-controller;
+		interrupt-parent = <&core_intc>;
+		interrupts = < 18 >;
+	};
+
+	memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x80000000 0x40000000>;
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;	/* 512MiB */
+	};
+};
diff --git a/src/arc/vdk_axc003_idu.dtsi b/src/arc/vdk_axc003_idu.dtsi
new file mode 100644
index 000000000000..82214cd7ba0c
--- /dev/null
+++ b/src/arc/vdk_axc003_idu.dtsi
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2014, 2015 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Device tree for AXC003 CPU card:
+ * HS38x2 (Dual Core) with IDU intc (VDK version)
+ */
+
+/include/ "skeleton_hs_idu.dtsi"
+
+/ {
+	compatible = "snps,arc";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpu_card {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x00000000 0xf0000000 0x10000000>;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+
+		core_intc: archs-intc@cpu {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		idu_intc: idu-interrupt-controller {
+			compatible = "snps,archs-idu-intc";
+			interrupt-controller;
+			interrupt-parent = <&core_intc>;
+
+			/*
+			 * <hwirq  distribution>
+			 * distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
+			 */
+			#interrupt-cells = <2>;
+
+			interrupts = <24 25 26 27>;
+		};
+
+		debug_uart: dw-apb-uart@0x5000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x5000 0x100>;
+			clock-frequency = <2403200>;
+			interrupt-parent = <&idu_intc>;
+			interrupts = <2 0>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+	};
+
+	mb_intc: dw-apb-ictl@0xe0012000 {
+		#interrupt-cells = <1>;
+		compatible = "snps,dw-apb-ictl";
+		reg = < 0xe0012000 0x200 >;
+		interrupt-controller;
+		interrupt-parent = <&idu_intc>;
+		interrupts = < 0 0 >;
+	};
+
+	memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x80000000 0x40000000>;
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;	/* 512MiB */
+	};
+};
diff --git a/src/arc/vdk_axs10x_mb.dtsi b/src/arc/vdk_axs10x_mb.dtsi
new file mode 100644
index 000000000000..99498a4b4216
--- /dev/null
+++ b/src/arc/vdk_axs10x_mb.dtsi
@@ -0,0 +1,98 @@
+/*
+ * Support for peripherals on the AXS10x mainboard (VDK version)
+ *
+ * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	axs10x_mb_vdk {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0xe0000000 0x10000000>;
+		interrupt-parent = <&mb_intc>;
+
+		clocks {
+			apbclk: apbclk {
+				compatible = "fixed-clock";
+				clock-frequency = <50000000>;
+				#clock-cells = <0>;
+			};
+
+			pguclk: pguclk {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <25175000>;
+			};
+		};
+
+		ethernet@0x18000 {
+			#interrupt-cells = <1>;
+			compatible = "snps,dwmac";
+			reg = < 0x18000 0x2000 >;
+			interrupts = < 4 >;
+			interrupt-names = "macirq";
+			phy-mode = "rgmii";
+			snps,phy-addr = < 0 >;  // VDK model phy address is 0
+			snps,pbl = < 32 >;
+			clocks = <&apbclk>;
+			clock-names = "stmmaceth";
+		};
+
+		ehci@0x40000 {
+			compatible = "generic-ehci";
+			reg = < 0x40000 0x100 >;
+			interrupts = < 8 >;
+		};
+
+		uart@0x20000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x20000 0x100>;
+			clock-frequency = <2403200>;
+			interrupts = <17>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		uart@0x21000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x21000 0x100>;
+			clock-frequency = <2403200>;
+			interrupts = <18>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		uart@0x22000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x22000 0x100>;
+			clock-frequency = <2403200>;
+			interrupts = <19>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+/* PGU output directly sent to virtual LCD screen; hdmi controller not modelled */
+		pgu@17000 {
+			compatible = "snps,arcpgu";
+			reg = <0x17000 0x400>;
+			clocks = <&pguclk>;
+			clock-names = "pxlclk";
+		};
+
+/* VDK has additional ps2 keyboard/mouse interface integrated in LCD screen model */
+		ps2: ps2@e0017400 {
+			compatible = "snps,arc_ps2";
+			reg = <0x17400 0x14>;
+			interrupts = <5>;
+			interrupt-names = "arc_ps2_irq";
+		};
+	};
+};
diff --git a/src/arc/vdk_hs38.dts b/src/arc/vdk_hs38.dts
new file mode 100644
index 000000000000..3c51103f0cd0
--- /dev/null
+++ b/src/arc/vdk_hs38.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
+ *
+ * ARC HS38 Virtual Development Kit (VDK)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "vdk_axc003.dtsi"
+/include/ "vdk_axs10x_mb.dtsi"
+
+/ {
+	model = "snps,vdk_archs";
+	compatible = "snps,axs103";
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0";
+	};
+};
diff --git a/src/arc/vdk_hs38_smp.dts b/src/arc/vdk_hs38_smp.dts
new file mode 100644
index 000000000000..6be68001a6f0
--- /dev/null
+++ b/src/arc/vdk_hs38_smp.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
+ *
+ * ARC HS38 Virtual Development Kit, SMP version (VDK)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "vdk_axc003_idu.dtsi"
+/include/ "vdk_axs10x_mb.dtsi"
+
+/ {
+	model = "snps,vdk_archs-smp";
+	compatible = "snps,axs103";
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 video=640x480-24";
+	};
+};
diff --git a/src/arm/aks-cdu.dts b/src/arm/aks-cdu.dts
index d9c50fbb49d2..5b1bf92d927c 100644
--- a/src/arm/aks-cdu.dts
+++ b/src/arm/aks-cdu.dts
@@ -57,7 +57,7 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/src/arm/am335x-baltos-ir2110.dts b/src/arm/am335x-baltos-ir2110.dts
index a9a97307d66c..501c7527121b 100644
--- a/src/arm/am335x-baltos-ir2110.dts
+++ b/src/arm/am335x-baltos-ir2110.dts
@@ -54,16 +54,22 @@
 	dr_mode = "host";
 };
 
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <1>;
+	};
+};
+
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <1>;
 	phy-mode = "rmii";
 	dual_emac_res_vlan = <1>;
+	phy-handle = <&phy0>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <7>;
 	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <2>;
+	phy-handle = <&phy1>;
 };
 
 &phy_sel {
diff --git a/src/arm/am335x-baltos-ir3220.dts b/src/arm/am335x-baltos-ir3220.dts
index fe002a17c04b..19f53b8569e1 100644
--- a/src/arm/am335x-baltos-ir3220.dts
+++ b/src/arm/am335x-baltos-ir3220.dts
@@ -109,9 +109,9 @@
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <7>;
 	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <2>;
+	phy-handle = <&phy1>;
 };
 
 &phy_sel {
diff --git a/src/arm/am335x-baltos-ir5221.dts b/src/arm/am335x-baltos-ir5221.dts
index d0faa7b8c5da..2b9d7f4db23f 100644
--- a/src/arm/am335x-baltos-ir5221.dts
+++ b/src/arm/am335x-baltos-ir5221.dts
@@ -114,7 +114,7 @@
 
 &usb1 {
 	status = "okay";
-	dr_mode = "otg";
+	dr_mode = "host";
 };
 
 &cpsw_emac0 {
@@ -127,9 +127,9 @@
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <7>;
 	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <2>;
+	phy-handle = <&phy1>;
 };
 
 &phy_sel {
diff --git a/src/arm/am335x-baltos.dtsi b/src/arm/am335x-baltos.dtsi
index c8609d8d2c55..efb5eae290a8 100644
--- a/src/arm/am335x-baltos.dtsi
+++ b/src/arm/am335x-baltos.dtsi
@@ -24,12 +24,12 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -37,7 +37,7 @@
 		regulator-boot-on;
 	};
 
-	wl12xx_vmmc: fixedregulator@2 {
+	wl12xx_vmmc: fixedregulator2 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&wl12xx_gpio>;
 		compatible = "regulator-fixed";
@@ -226,7 +226,7 @@
 
 		#address-cells = <1>;
 		#size-cells = <1>;
-		elm_id = <&elm>;
+		ti,elm-id = <&elm>;
 	};
 };
 
@@ -364,11 +364,14 @@
 };
 
 &davinci_mdio {
+	status = "okay";
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 
-	status = "okay";
+	phy1: ethernet-phy@1 {
+		reg = <7>;
+	};
 };
 
 &mmc1 {
@@ -406,3 +409,7 @@
 &gpio0 {
 	ti,no-reset-on-init;
 };
+
+&gpio3 {
+	ti,no-reset-on-init;
+};
diff --git a/src/arm/am335x-base0033.dts b/src/arm/am335x-base0033.dts
index 58a05f7d0b7c..c2bee452dab8 100644
--- a/src/arm/am335x-base0033.dts
+++ b/src/arm/am335x-base0033.dts
@@ -29,13 +29,13 @@
 
 		compatible = "gpio-leds";
 
-		led@0 {
+		led0 {
 			label = "base:red:user";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;	/* gpio1_21 */
 			default-state = "off";
 		};
 
-		led@1 {
+		led1 {
 			label = "base:green:user";
 			gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;	/* gpio2_0 */
 			default-state = "off";
diff --git a/src/arm/am335x-bone-common.dtsi b/src/arm/am335x-bone-common.dtsi
index 0cc150b87b86..3e32dd18fd25 100644
--- a/src/arm/am335x-bone-common.dtsi
+++ b/src/arm/am335x-bone-common.dtsi
@@ -13,39 +13,43 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
+	chosen {
+		stdout-path = &uart0;
+	};
+
 	leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_leds_s0>;
 
 		compatible = "gpio-leds";
 
-		led@2 {
+		led2 {
 			label = "beaglebone:green:heartbeat";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "beaglebone:green:mmc0";
 			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
-		led@4 {
+		led4 {
 			label = "beaglebone:green:usr2";
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "cpu0";
 			default-state = "off";
 		};
 
-		led@5 {
+		led5 {
 			label = "beaglebone:green:usr3";
 			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc1";
@@ -53,7 +57,7 @@
 		};
 	};
 
-	vmmcsd_fixed: fixedregulator@0 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
@@ -306,8 +310,23 @@
 	 * by the hardware problems. (Tip: double-check by performing a current
 	 * measurement after shutdown: it should be less than 1 mA.)
 	 */
+
+	interrupts = <7>; /* NMI */
+	interrupt-parent = <&intc>;
+
 	ti,pmic-shutdown-controller;
 
+	charger {
+		interrupts = <0>, <1>;
+		interrupt-names = "USB", "AC";
+		status = "okay";
+	};
+
+	pwrbutton {
+		interrupts = <2>;
+		status = "okay";
+	};
+
 	regulators {
 		dcdc1_reg: regulator@0 {
 			regulator-name = "vdds_dpr";
@@ -318,7 +337,7 @@
 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
+			regulator-max-microvolt = <1351500>;
 			regulator-boot-on;
 			regulator-always-on;
 		};
@@ -359,12 +378,8 @@
 	phy-mode = "mii";
 };
 
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "mii";
-};
-
 &mac {
+	slaves = <1>;
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
@@ -393,3 +408,8 @@
 &sham {
 	status = "okay";
 };
+
+&rtc {
+	clocks = <&clk_32768_ck>, <&clkdiv32k_ick>;
+	clock-names = "ext-clk", "int-clk";
+};
diff --git a/src/arm/am335x-boneblack.dts b/src/arm/am335x-boneblack.dts
index 55c0e954b146..db00d8ef7b19 100644
--- a/src/arm/am335x-boneblack.dts
+++ b/src/arm/am335x-boneblack.dts
@@ -9,6 +9,7 @@
 
 #include "am33xx.dtsi"
 #include "am335x-bone-common.dtsi"
+#include <dt-bindings/display/tda998x.h>
 
 / {
 	model = "TI AM335x BeagleBone Black";
@@ -64,10 +65,28 @@
 			AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr0 */
 		>;
 	};
+
+	mcasp0_pins: mcasp0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
+			AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
+			AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
+			AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
+			AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */
+		>;
+	};
 };
 
 &lcdc {
 	status = "okay";
+
+	/* If you want to get 24 bit RGB and 16 BGR mode instead of
+	 * current 16 bit RGB and 24 BGR modes, set the propety
+	 * below to "crossed" and uncomment the video-ports -property
+	 * in tda19988 node.
+	 */
+	blue-and-red-wiring = "straight";
+
 	port {
 		lcdc_0: endpoint@0 {
 			remote-endpoint = <&hdmi_0>;
@@ -76,16 +95,25 @@
 };
 
 &i2c0 {
-	tda19988 {
+	tda19988: tda19988 {
 		compatible = "nxp,tda998x";
 		reg = <0x70>;
+
 		pinctrl-names = "default", "off";
 		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
 		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
 
-		port {
-			hdmi_0: endpoint@0 {
-				remote-endpoint = <&lcdc_0>;
+		/* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
+		/* video-ports = <0x234501>; */
+
+		#sound-dai-cells = <0>;
+		audio-ports = <	TDA998x_I2S	0x03>;
+
+		ports {
+			port@0 {
+				hdmi_0: endpoint@0 {
+					remote-endpoint = <&lcdc_0>;
+				};
 			};
 		};
 	};
@@ -94,3 +122,49 @@
 &rtc {
 	system-power-controller;
 };
+
+&mcasp0	{
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+	status = "okay";
+	op-mode = <0>;	/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 1 0
+		>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+/ {
+	clk_mcasp0_fixed: clk_mcasp0_fixed {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24576000>;
+	};
+
+	clk_mcasp0: clk_mcasp0 {
+		#clock-cells = <0>;
+		compatible = "gpio-gate-clock";
+		clocks = <&clk_mcasp0_fixed>;
+		enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "TI BeagleBone Black";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink0_master>;
+		simple-audio-card,frame-master = <&dailink0_master>;
+
+		dailink0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+			clocks = <&clk_mcasp0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tda19988>;
+		};
+	};
+};
diff --git a/src/arm/am335x-chilisom.dtsi b/src/arm/am335x-chilisom.dtsi
index 1d647358f1c1..f9ee5859c154 100644
--- a/src/arm/am335x-chilisom.dtsi
+++ b/src/arm/am335x-chilisom.dtsi
@@ -19,7 +19,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
diff --git a/src/arm/am335x-cm-t335.dts b/src/arm/am335x-cm-t335.dts
index 817b1dec0683..947c81b7aaaf 100644
--- a/src/arm/am335x-cm-t335.dts
+++ b/src/arm/am335x-cm-t335.dts
@@ -17,7 +17,7 @@
 	model = "CompuLab CM-T335";
 	compatible = "compulab,cm-t335", "ti,am33xx";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x8000000>;	/* 128 MB */
 	};
@@ -26,7 +26,7 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_led_pins>;
-		led@0 {
+		led0 {
 			label = "cm_t335:green";
 			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;	/* gpio2_0 */
 			linux,default-trigger = "heartbeat";
@@ -34,7 +34,7 @@
 	};
 
 	/* regulator for mmc */
-	vmmc_fixed: fixedregulator@0 {
+	vmmc_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc_fixed";
 		regulator-min-microvolt = <3300000>;
@@ -42,7 +42,7 @@
 	};
 
 	/* Regulator for WiFi */
-	vwlan_fixed: fixedregulator@2 {
+	vwlan_fixed: fixedregulator2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vwlan_fixed";
 		gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */
diff --git a/src/arm/am335x-evm.dts b/src/arm/am335x-evm.dts
index 516673bb023d..c2186ec2834b 100644
--- a/src/arm/am335x-evm.dts
+++ b/src/arm/am335x-evm.dts
@@ -20,12 +20,12 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -33,13 +33,13 @@
 		regulator-boot-on;
 	};
 
-	lis3_reg: fixedregulator@1 {
+	lis3_reg: fixedregulator1 {
 		compatible = "regulator-fixed";
 		regulator-name = "lis3_reg";
 		regulator-boot-on;
 	};
 
-	wlan_en_reg: fixedregulator@2 {
+	wlan_en_reg: fixedregulator2 {
 		compatible = "regulator-fixed";
 		regulator-name = "wlan-en-regulator";
 		regulator-min-microvolt = <1800000>;
@@ -53,7 +53,7 @@
 		enable-active-high;
 	};
 
-	matrix_keypad: matrix_keypad@0 {
+	matrix_keypad: matrix_keypad0 {
 		compatible = "gpio-matrix-keypad";
 		debounce-delay-ms = <5>;
 		col-scan-delay-us = <2>;
@@ -73,20 +73,20 @@
 				0x0201006c>;	/* DOWN */
 	};
 
-	gpio_keys: volume_keys@0 {
+	gpio_keys: volume_keys0 {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		autorepeat;
 
-		switch@9 {
+		switch9 {
 			label = "volume-up";
 			linux,code = <115>;
 			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
 			wakeup-source;
 		};
 
-		switch@10 {
+		switch10 {
 			label = "volume-down";
 			linux,code = <114>;
 			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
@@ -497,6 +497,8 @@
 
 &lcdc {
 	status = "okay";
+
+	blue-and-red-wiring = "crossed";
 };
 
 &elm {
@@ -640,7 +642,7 @@
 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
+			regulator-max-microvolt = <1351500>;
 			regulator-boot-on;
 			regulator-always-on;
 		};
@@ -781,3 +783,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&dcan1_pins_default>;
 };
+
+&rtc {
+	clocks = <&clk_32768_ck>, <&clkdiv32k_ick>;
+	clock-names = "ext-clk", "int-clk";
+};
diff --git a/src/arm/am335x-evmsk.dts b/src/arm/am335x-evmsk.dts
index 282fe1b37095..e2548d1ce753 100644
--- a/src/arm/am335x-evmsk.dts
+++ b/src/arm/am335x-evmsk.dts
@@ -27,12 +27,12 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -40,13 +40,13 @@
 		regulator-boot-on;
 	};
 
-	lis3_reg: fixedregulator@1 {
+	lis3_reg: fixedregulator1 {
 		compatible = "regulator-fixed";
 		regulator-name = "lis3_reg";
 		regulator-boot-on;
 	};
 
-	wl12xx_vmmc: fixedregulator@2 {
+	wl12xx_vmmc: fixedregulator2 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&wl12xx_gpio>;
 		compatible = "regulator-fixed";
@@ -58,7 +58,7 @@
 		enable-active-high;
 	};
 
-	vtt_fixed: fixedregulator@3 {
+	vtt_fixed: fixedregulator3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vtt";
 		regulator-min-microvolt = <1500000>;
@@ -75,26 +75,26 @@
 
 		compatible = "gpio-leds";
 
-		led@1 {
+		led1 {
 			label = "evmsk:green:usr0";
 			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "evmsk:green:usr1";
 			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "evmsk:green:mmc0";
 			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
-		led@4 {
+		led4 {
 			label = "evmsk:green:heartbeat";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -102,31 +102,31 @@
 		};
 	};
 
-	gpio_buttons: gpio_buttons@0 {
+	gpio_buttons: gpio_buttons0 {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		switch@1 {
+		switch1 {
 			label = "button0";
 			linux,code = <0x100>;
 			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 		};
 
-		switch@2 {
+		switch2 {
 			label = "button1";
 			linux,code = <0x101>;
 			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		switch@3 {
+		switch3 {
 			label = "button2";
 			linux,code = <0x102>;
 			gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
 			wakeup-source;
 		};
 
-		switch@4 {
+		switch4 {
 			label = "button3";
 			linux,code = <0x103>;
 			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
@@ -170,29 +170,29 @@
 		pinctrl-1 = <&lcd_pins_sleep>;
 		status = "okay";
 		panel-info {
-			ac-bias           = <255>;
-			ac-bias-intrpt    = <0>;
-			dma-burst-sz      = <16>;
-			bpp               = <32>;
-			fdd               = <0x80>;
-			sync-edge         = <0>;
-			sync-ctrl         = <1>;
-			raster-order      = <0>;
-			fifo-th           = <0>;
+			ac-bias		= <255>;
+			ac-bias-intrpt	= <0>;
+			dma-burst-sz	= <16>;
+			bpp		= <32>;
+			fdd		= <0x80>;
+			sync-edge	= <0>;
+			sync-ctrl	= <1>;
+			raster-order	= <0>;
+			fifo-th		= <0>;
 		};
 		display-timings {
 			480x272 {
-				hactive         = <480>;
-				vactive         = <272>;
-				hback-porch     = <43>;
-				hfront-porch    = <8>;
-				hsync-len       = <4>;
-				vback-porch     = <12>;
-				vfront-porch    = <4>;
-				vsync-len       = <10>;
+				hactive		= <480>;
+				vactive		= <272>;
+				hback-porch	= <43>;
+				hfront-porch	= <8>;
+				hsync-len	= <4>;
+				vback-porch	= <12>;
+				vfront-porch	= <4>;
+				vsync-len	= <10>;
 				clock-frequency = <9000000>;
-				hsync-active    = <0>;
-				vsync-active    = <0>;
+				hsync-active	= <0>;
+				vsync-active	= <0>;
 			};
 		};
 	};
@@ -560,7 +560,7 @@
 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
+			regulator-max-microvolt = <1351500>;
 			regulator-boot-on;
 			regulator-always-on;
 		};
@@ -711,5 +711,12 @@
 };
 
 &lcdc {
-      status = "okay";
+	status = "okay";
+
+	blue-and-red-wiring = "crossed";
+};
+
+&rtc {
+	clocks = <&clk_32768_ck>, <&clkdiv32k_ick>;
+	clock-names = "ext-clk", "int-clk";
 };
diff --git a/src/arm/am335x-icev2.dts b/src/arm/am335x-icev2.dts
index e271013e78a6..8ed46f9d79b7 100644
--- a/src/arm/am335x-icev2.dts
+++ b/src/arm/am335x-icev2.dts
@@ -19,12 +19,12 @@
 	model = "TI AM3359 ICE-V2";
 	compatible = "ti,am3359-icev2", "ti,am33xx";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -32,7 +32,7 @@
 		regulator-boot-on;
 	};
 
-	vtt_fixed: fixedregulator@1 {
+	vtt_fixed: fixedregulator1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vtt";
 		regulator-min-microvolt = <1500000>;
@@ -43,52 +43,52 @@
 		enable-active-high;
 	};
 
-	leds@0 {
+	leds-iio {
+		status = "disabled";
 		compatible = "gpio-leds";
-
-		led@0 {
+		led-out0 {
 			label = "out0";
 			gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@1 {
+		led-out1 {
 			label = "out1";
 			gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@2 {
+		led-out2 {
 			label = "out2";
 			gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@3 {
+		led-out3 {
 			label = "out3";
 			gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@4 {
+		led-out4 {
 			label = "out4";
 			gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@5 {
+		led-out5 {
 			label = "out5";
 			gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@6 {
+		led-out6 {
 			label = "out6";
 			gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@7 {
+		led-out7 {
 			label = "out7";
 			gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
@@ -96,49 +96,58 @@
 	};
 
 	/* Tricolor status LEDs */
-	leds@1 {
+	leds1 {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_leds>;
 
-		led@0 {
+		led0 {
 			label = "status0:red:cpu0";
 			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 			linux,default-trigger = "cpu0";
 		};
 
-		led@1 {
+		led1 {
 			label = "status0:green:usr";
 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "status0:yellow:usr";
 			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "status1:red:mmc0";
 			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 			linux,default-trigger = "mmc0";
 		};
 
-		led@4 {
+		led4 {
 			label = "status1:green:usr";
 			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@5 {
+		led5 {
 			label = "status1:yellow:usr";
 			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 	};
+	gpio-decoder {
+		compatible = "gpio-decoder";
+		gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
+			<&pca9536 2 GPIO_ACTIVE_HIGH>,
+			<&pca9536 1 GPIO_ACTIVE_HIGH>,
+			<&pca9536 0 GPIO_ACTIVE_HIGH>;
+		linux,axis = <0>; /* ABS_X */
+		decoder-max-value = <9>;
+	};
 };
 
 &am33xx_pinmux {
@@ -161,7 +170,6 @@
 			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */
 			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */
 			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */
-			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE5) /* (C15) spi0_cs1.mmc0_sdcd */
 		>;
 	};
 
@@ -178,6 +186,8 @@
 			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */
 			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */
 			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */
+			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE0) /* (C15) spi0_cs1.spi0_cs1 */
+			AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* (B12) mcasp0_aclkr.gpio3[18] */
 		>;
 	};
 
@@ -206,6 +216,38 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	pca9536: gpio@41 {
+		compatible = "ti,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_default>;
+
+	sn65hvs882@1 {
+		compatible = "pisosr-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		load-gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+
+		reg = <1>;
+		spi-max-frequency = <1000000>;
+		spi-cpol;
+	};
+};
+
+&tscadc {
+	status = "okay";
+	adc {
+		ti,adc-channels = <1 2 3 4 5 6 7>;
+	};
 };
 
 #include "tps65910.dtsi"
diff --git a/src/arm/am335x-igep0033.dtsi b/src/arm/am335x-igep0033.dtsi
index df63484ef9b3..a5769a8f5fc8 100644
--- a/src/arm/am335x-igep0033.dtsi
+++ b/src/arm/am335x-igep0033.dtsi
@@ -20,7 +20,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
@@ -31,14 +31,14 @@
 
 		compatible = "gpio-leds";
 
-		led@0 {
+		led0 {
 			label = "com:green:user";
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -46,7 +46,7 @@
 		regulator-boot-on;
 	};
 
-	vmmc: fixedregulator@0 {
+	vmmc: fixedregulator1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc";
 		regulator-min-microvolt = <3300000>;
@@ -161,7 +161,7 @@
 
 		#address-cells = <1>;
 		#size-cells = <1>;
-		elm_id = <&elm>;
+		ti,elm-id = <&elm>;
 
 		/* MTD partition table */
 		partition@0 {
diff --git a/src/arm/am335x-lxm.dts b/src/arm/am335x-lxm.dts
index d97b0efa43f3..1d6c6fa703e4 100644
--- a/src/arm/am335x-lxm.dts
+++ b/src/arm/am335x-lxm.dts
@@ -19,13 +19,13 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
 
 	/* Power supply provides a fixed 5V @2A */
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -34,7 +34,7 @@
 	};
 
 	/* Power supply provides a fixed 3.3V @3A */
-	vmmcsd_fixed: fixedregulator@1 {
+	vmmcsd_fixed: fixedregulator1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm/am335x-nano.dts b/src/arm/am335x-nano.dts
index f313999c503e..483d585c8908 100644
--- a/src/arm/am335x-nano.dts
+++ b/src/arm/am335x-nano.dts
@@ -19,7 +19,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
@@ -27,7 +27,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		led@0 {
+		led0 {
 			label = "nanobone:green:usr1";
 			gpios = <&gpio1 5 0>;
 			default-state = "off";
diff --git a/src/arm/am335x-pepper.dts b/src/arm/am335x-pepper.dts
index 8867aaaec54d..30e2f8770aaf 100644
--- a/src/arm/am335x-pepper.dts
+++ b/src/arm/am335x-pepper.dts
@@ -20,7 +20,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
@@ -41,15 +41,15 @@
 		compatible = "ti,da830-evm-audio";
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 	};
 
-	v3v3c_reg: fixedregulator@1 {
+	v3v3c_reg: fixedregulator1 {
 		compatible = "regulator-fixed";
 	};
 
-	vdd5_reg: fixedregulator@2 {
+	vdd5_reg: fixedregulator2 {
 		compatible = "regulator-fixed";
 	};
 };
@@ -595,14 +595,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&user_leds_pins>;
 
-	led@0 {
+	led0 {
 		label = "pepper:user0:blue";
 		gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
 		linux,default-trigger = "none";
 		default-state = "off";
 	};
 
-	led@1 {
+	led1 {
 		label = "pepper:user1:red";
 		gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 		linux,default-trigger = "none";
@@ -616,21 +616,21 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	button@0 {
+	button0 {
 		label = "home";
 		linux,code = <KEY_HOME>;
 		gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
 		wakeup-source;
 	};
 
-	button@1 {
+	button1 {
 		label = "menu";
 		linux,code = <KEY_MENU>;
 		gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
 		wakeup-source;
 	};
 
-	buttons@2 {
+	buttons2 {
 		label = "power";
 		linux,code = <KEY_POWER>;
 		gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
diff --git a/src/arm/am335x-phycore-som.dtsi b/src/arm/am335x-phycore-som.dtsi
index 86f773165d5c..75e24add3f13 100644
--- a/src/arm/am335x-phycore-som.dtsi
+++ b/src/arm/am335x-phycore-som.dtsi
@@ -25,7 +25,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
@@ -33,7 +33,7 @@
 	regulators {
 		compatible = "simple-bus";
 
-		vcc5v: fixedregulator@0 {
+		vcc5v: fixedregulator0 {
 			compatible = "regulator-fixed";
 			regulator-name = "vcc5v";
 			regulator-min-microvolt = <5000000>;
@@ -197,7 +197,7 @@
 		gpmc,wr-access-ns = <30>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 
-		elm_id = <&elm>;
+		ti,elm-id = <&elm>;
 
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/src/arm/am335x-shc.dts b/src/arm/am335x-shc.dts
index 837d5b80ea1d..bf8727a19ece 100644
--- a/src/arm/am335x-shc.dts
+++ b/src/arm/am335x-shc.dts
@@ -64,50 +64,50 @@
 
 		compatible = "gpio-leds";
 
-		led@1 {
+		led1 {
 			label = "shc:power:red";
 			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "shc:power:bl";
 			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
 			default-state = "on";
 		};
 
-		led@3 {
+		led3 {
 			label = "shc:lan:red";
 			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@4 {
+		led4 {
 			label = "shc:lan:bl";
 			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@5 {
+		led5 {
 			label = "shc:cloud:red";
 			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@6 {
+		led6 {
 			label = "shc:cloud:bl";
 			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
 
-	vmmcsd_fixed: fixedregulator@0 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm/am335x-sl50.dts b/src/arm/am335x-sl50.dts
index a6efbe6eda3b..b0dfa6f14cd5 100644
--- a/src/arm/am335x-sl50.dts
+++ b/src/arm/am335x-sl50.dts
@@ -19,6 +19,11 @@
 		};
 	};
 
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
 	chosen {
 		stdout-path = &uart0;
 	};
@@ -28,25 +33,25 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
 
-		led@0 {
+		led0 {
 			label = "sl50:green:usr0";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		led@1 {
+		led1 {
 			label = "sl50:red:usr1";
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "sl50:green:usr2";
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "sl50:red:usr3";
 			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 			default-state = "off";
@@ -103,7 +108,7 @@
 		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
 	};
 
-	vmmcsd_fixed: fixedregulator@0 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm/am335x-wega.dtsi b/src/arm/am335x-wega.dtsi
index 282f6d4b27bc..02c67365c4e1 100644
--- a/src/arm/am335x-wega.dtsi
+++ b/src/arm/am335x-wega.dtsi
@@ -11,10 +11,14 @@
 	model = "Phytec AM335x phyBOARD-WEGA";
 	compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
 
+	sound: sound_iface {
+		compatible = "ti,da830-evm-audio";
+	};
+
 	regulators {
 		compatible = "simple-bus";
 
-		vcc3v3: fixedregulator@1 {
+		vcc3v3: fixedregulator1 {
 			compatible = "regulator-fixed";
 			regulator-name = "vcc3v3";
 			regulator-min-microvolt = <3300000>;
@@ -24,6 +28,58 @@
 	};
 };
 
+/* Audio */
+&am33xx_pinmux {
+	mcasp0_pins: pinmux_mcasp0 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9AC, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahclkx.mcasp0_ahclkx */
+			AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0)  /* mcasp0_aclkx.mcasp0_aclkx */
+			AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0)  /* mcasp0_fsx.mcasp0_fsx */
+			AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0)  /* mcasp0_axr0.mcasp0_axr0 */
+			AM33XX_IOPAD(0x9A8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */
+		>;
+	};
+};
+
+&i2c0 {
+	tlv320aic3007: tlv320aic3007@18 {
+		compatible = "ti,tlv320aic3007";
+		reg = <0x18>;
+		AVDD-supply = <&vcc3v3>;
+		IOVDD-supply = <&vcc3v3>;
+		DRVDD-supply = <&vcc3v3>;
+		DVDD-supply = <&vdig1_reg>;
+		status = "okay";
+	};
+};
+
+&mcasp0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+	op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <
+		2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */
+	>;
+	tx-num-evt = <16>;
+	rt-num-evt = <16>;
+	status = "okay";
+};
+
+&sound {
+	ti,model = "AM335x-Wega";
+	ti,audio-codec = <&tlv320aic3007>;
+	ti,mcasp-controller = <&mcasp0>;
+	ti,audio-routing =
+		"Line Out",		"LLOUT",
+		"Line Out",		"RLOUT",
+		"LINE1L",		"Line In",
+		"LINE1R",		"Line In";
+	clocks = <&mcasp0_fck>;
+	clock-names = "mclk";
+	status = "okay";
+};
+
 /* CAN Busses */
 &am33xx_pinmux {
 	dcan1_pins: pinmux_dcan1 {
@@ -99,6 +155,12 @@
 	status = "okay";
 };
 
+/* Power */
+&vdig1_reg {
+	regulator-boot-on;
+	regulator-always-on;
+};
+
 /* UARTs */
 &am33xx_pinmux {
 	uart0_pins: pinmux_uart0 {
diff --git a/src/arm/am33xx.dtsi b/src/arm/am33xx.dtsi
index 52be48bbd2dd..18d72a245e88 100644
--- a/src/arm/am33xx.dtsi
+++ b/src/arm/am33xx.dtsi
@@ -11,11 +11,12 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/am33xx.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "ti,am33xx";
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
 
 	aliases {
 		i2c0 = &i2c0;
@@ -130,6 +131,7 @@
 				reg = <0x210000 0x2000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
+				#pinctrl-cells = <1>;
 				ranges = <0 0x210000 0x2000>;
 
 				am33xx_pinmux: pinmux@800 {
@@ -137,6 +139,7 @@
 					reg = <0x800 0x238>;
 					#address-cells = <1>;
 					#size-cells = <0>;
+					#pinctrl-cells = <1>;
 					pinctrl-single,register-width = <32>;
 					pinctrl-single,function-mask = <0x7f>;
 				};
@@ -187,7 +190,7 @@
 			reg =	<0x49000000 0x10000>;
 			reg-names = "edma3_cc";
 			interrupts = <12 13 14>;
-			interrupt-names = "edma3_ccint", "emda3_mperr",
+			interrupt-names = "edma3_ccint", "edma3_mperr",
 					  "edma3_ccerrint";
 			dma-requests = <64>;
 			#dma-cells = <2>;
@@ -505,6 +508,8 @@
 			interrupts = <75
 				      76>;
 			ti,hwmods = "rtc";
+			clocks = <&clkdiv32k_ick>;
+			clock-names = "int-clk";
 		};
 
 		spi0: spi@48030000 {
@@ -679,20 +684,24 @@
 				  0x48300200 0x48300200 0x80>; /* EHRPWM */
 
 			ecap0: ecap@48300100 {
-				compatible = "ti,am33xx-ecap";
+				compatible = "ti,am3352-ecap",
+					     "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48300100 0x80>;
+				clocks = <&l4ls_gclk>;
+				clock-names = "fck";
 				interrupts = <31>;
 				interrupt-names = "ecap0";
-				ti,hwmods = "ecap0";
 				status = "disabled";
 			};
 
 			ehrpwm0: pwm@48300200 {
-				compatible = "ti,am33xx-ehrpwm";
+				compatible = "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48300200 0x80>;
-				ti,hwmods = "ehrpwm0";
+				clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
@@ -709,20 +718,24 @@
 				  0x48302200 0x48302200 0x80>; /* EHRPWM */
 
 			ecap1: ecap@48302100 {
-				compatible = "ti,am33xx-ecap";
+				compatible = "ti,am3352-ecap",
+					     "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48302100 0x80>;
+				clocks = <&l4ls_gclk>;
+				clock-names = "fck";
 				interrupts = <47>;
 				interrupt-names = "ecap1";
-				ti,hwmods = "ecap1";
 				status = "disabled";
 			};
 
 			ehrpwm1: pwm@48302200 {
-				compatible = "ti,am33xx-ehrpwm";
+				compatible = "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48302200 0x80>;
-				ti,hwmods = "ehrpwm1";
+				clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
@@ -739,20 +752,24 @@
 				  0x48304200 0x48304200 0x80>; /* EHRPWM */
 
 			ecap2: ecap@48304100 {
-				compatible = "ti,am33xx-ecap";
+				compatible = "ti,am3352-ecap",
+					     "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48304100 0x80>;
+				clocks = <&l4ls_gclk>;
+				clock-names = "fck";
 				interrupts = <61>;
 				interrupt-names = "ecap2";
-				ti,hwmods = "ecap2";
 				status = "disabled";
 			};
 
 			ehrpwm2: pwm@48304200 {
-				compatible = "ti,am33xx-ehrpwm";
+				compatible = "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48304200 0x80>;
-				ti,hwmods = "ehrpwm2";
+				clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
@@ -766,7 +783,6 @@
 			ale_entries = <1024>;
 			bd_ram_size = <0x2000>;
 			no_bd_ram = <0>;
-			rx_descs = <64>;
 			mac_control = <0x20>;
 			slaves = <2>;
 			active_slave = <0>;
@@ -789,7 +805,7 @@
 			status = "disabled";
 
 			davinci_mdio: mdio@4a101000 {
-				compatible = "ti,davinci_mdio";
+				compatible = "ti,cpsw-mdio","ti,davinci_mdio";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				ti,hwmods = "davinci_mdio";
@@ -844,6 +860,8 @@
 			interrupts = <16>;
 			ti,hwmods = "adc_tsc";
 			status = "disabled";
+			dmas = <&edma 53 0>, <&edma 57 0>;
+			dma-names = "fifo0", "fifo1";
 
 			tsc {
 				compatible = "ti,am3359-tsc";
diff --git a/src/arm/am3517-craneboard.dts b/src/arm/am3517-craneboard.dts
index cb7de1d4e05f..083ff5073435 100644
--- a/src/arm/am3517-craneboard.dts
+++ b/src/arm/am3517-craneboard.dts
@@ -15,12 +15,12 @@
 	model = "TI AM3517 CraneBoard (TMDSEVM3517)";
 	compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>;	/* 256 MB */
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
diff --git a/src/arm/am3517-evm.dts b/src/arm/am3517-evm.dts
index b4127c6493a2..0e4a125f78e3 100644
--- a/src/arm/am3517-evm.dts
+++ b/src/arm/am3517-evm.dts
@@ -13,7 +13,7 @@
 	model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
 	compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/src/arm/am3517.dtsi b/src/arm/am3517.dtsi
index 5e3f5e86ffcf..9fe545dbfa89 100644
--- a/src/arm/am3517.dtsi
+++ b/src/arm/am3517.dtsi
@@ -15,7 +15,7 @@
 		serial3 = &uart4;
 	};
 
-	ocp {
+	ocp@68000000 {
 		am35x_otg_hs: am35x_otg_hs@5c040000 {
 			compatible = "ti,omap3-musb";
 			ti,hwmods = "am35x_otg_hs";
@@ -66,6 +66,7 @@
 			reg = <0x480025d8 0x24>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#pinctrl-cells = <1>;
 			#interrupt-cells = <1>;
 			interrupt-controller;
 			pinctrl-single,register-width = <16>;
diff --git a/src/arm/am3517_mt_ventoux.dts b/src/arm/am3517_mt_ventoux.dts
index fdf5ce63c8e6..3395783c5b4e 100644
--- a/src/arm/am3517_mt_ventoux.dts
+++ b/src/arm/am3517_mt_ventoux.dts
@@ -13,7 +13,7 @@
 	model = "TeeJet Mt.Ventoux";
 	compatible = "teejet,mt_ventoux", "ti,omap3";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/src/arm/am4372.dtsi b/src/arm/am4372.dtsi
index 12fcde4d4d2e..2df9e6050c2f 100644
--- a/src/arm/am4372.dtsi
+++ b/src/arm/am4372.dtsi
@@ -11,12 +11,17 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "ti,am4372", "ti,am43";
 	interrupt-parent = <&wakeupgen>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
 
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
 
 	aliases {
 		i2c0 = &i2c0;
@@ -44,10 +49,49 @@
 			clocks = <&dpll_mpu_ck>;
 			clock-names = "cpu";
 
+			operating-points-v2 = <&cpu0_opp_table>;
+			ti,syscon-efuse = <&scm_conf 0x610 0x3f 0>;
+			ti,syscon-rev = <&scm_conf 0x600>;
+
 			clock-latency = <300000>; /* From omap-cpufreq driver */
 		};
 	};
 
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+
+		opp50@300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <950000 931000 969000>;
+			opp-supported-hw = <0xFF 0x01>;
+			opp-suspend;
+		};
+
+		opp100@600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1100000 1078000 1122000>;
+			opp-supported-hw = <0xFF 0x04>;
+		};
+
+		opp120@720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1200000 1176000 1224000>;
+			opp-supported-hw = <0xFF 0x08>;
+		};
+
+		oppturbo@800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1260000 1234800 1285200>;
+			opp-supported-hw = <0xFF 0x10>;
+		};
+
+		oppnitro@1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1325000 1298500 1351500>;
+			opp-supported-hw = <0xFF 0x20>;
+		};
+	};
+
 	gic: interrupt-controller@48241000 {
 		compatible = "arm,cortex-a9-gic";
 		interrupt-controller;
@@ -93,7 +137,7 @@
 		cache-level = <2>;
 	};
 
-	ocp {
+	ocp@44000000 {
 		compatible = "ti,am4372-l3-noc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -146,6 +190,7 @@
 					reg = <0x800 0x31c>;
 					#address-cells = <1>;
 					#size-cells = <0>;
+					#pinctrl-cells = <1>;
 					#interrupt-cells = <1>;
 					interrupt-controller;
 					pinctrl-single,register-width = <32>;
@@ -199,7 +244,7 @@
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_ccint", "emda3_mperr",
+			interrupt-names = "edma3_ccint", "edma3_mperr",
 					  "edma3_ccerrint";
 			dma-requests = <64>;
 			#dma-cells = <2>;
@@ -626,7 +671,6 @@
 			ale_entries = <1024>;
 			bd_ram_size = <0x2000>;
 			no_bd_ram = <0>;
-			rx_descs = <64>;
 			mac_control = <0x20>;
 			slaves = <2>;
 			active_slave = <0>;
@@ -636,7 +680,7 @@
 			syscon = <&scm_conf>;
 
 			davinci_mdio: mdio@4a101000 {
-				compatible = "ti,am4372-mdio","ti,davinci_mdio";
+				compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio";
 				reg = <0x4a101000 0x100>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -672,18 +716,24 @@
 			status = "disabled";
 
 			ecap0: ecap@48300100 {
-				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				compatible = "ti,am4372-ecap",
+					     "ti,am3352-ecap",
+					     "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48300100 0x80>;
-				ti,hwmods = "ecap0";
+				clocks = <&l4ls_gclk>;
+				clock-names = "fck";
 				status = "disabled";
 			};
 
 			ehrpwm0: pwm@48300200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				compatible = "ti,am4372-ehrpwm",
+					     "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48300200 0x80>;
-				ti,hwmods = "ehrpwm0";
+				clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
@@ -698,18 +748,24 @@
 			status = "disabled";
 
 			ecap1: ecap@48302100 {
-				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				compatible = "ti,am4372-ecap",
+					     "ti,am3352-ecap",
+					     "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48302100 0x80>;
-				ti,hwmods = "ecap1";
+				clocks = <&l4ls_gclk>;
+				clock-names = "fck";
 				status = "disabled";
 			};
 
 			ehrpwm1: pwm@48302200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				compatible = "ti,am4372-ehrpwm",
+					     "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48302200 0x80>;
-				ti,hwmods = "ehrpwm1";
+				clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
@@ -724,18 +780,24 @@
 			status = "disabled";
 
 			ecap2: ecap@48304100 {
-				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				compatible = "ti,am4372-ecap",
+					     "ti,am3352-ecap",
+					     "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48304100 0x80>;
-				ti,hwmods = "ecap2";
+				clocks = <&l4ls_gclk>;
+				clock-names = "fck";
 				status = "disabled";
 			};
 
 			ehrpwm2: pwm@48304200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				compatible = "ti,am4372-ehrpwm",
+					     "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48304200 0x80>;
-				ti,hwmods = "ehrpwm2";
+				clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
@@ -750,10 +812,13 @@
 			status = "disabled";
 
 			ehrpwm3: pwm@48306200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				compatible = "ti,am4372-ehrpwm",
+					     "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48306200 0x80>;
-				ti,hwmods = "ehrpwm3";
+				clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
@@ -768,10 +833,13 @@
 			status = "disabled";
 
 			ehrpwm4: pwm@48308200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				compatible = "ti,am4372-ehrpwm",
+					     "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48308200 0x80>;
-				ti,hwmods = "ehrpwm4";
+				clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
@@ -786,10 +854,13 @@
 			status = "disabled";
 
 			ehrpwm5: pwm@4830a200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				compatible = "ti,am4372-ehrpwm",
+					     "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x4830a200 0x80>;
-				ti,hwmods = "ehrpwm5";
+				clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
@@ -802,6 +873,8 @@
 			clocks = <&adc_tsc_fck>;
 			clock-names = "fck";
 			status = "disabled";
+			dmas = <&edma 53 0>, <&edma 57 0>;
+			dma-names = "fifo0", "fifo1";
 
 			tsc {
 				compatible = "ti,am3359-tsc";
@@ -843,6 +916,13 @@
 			dma-names = "tx", "rx";
 		};
 
+		rng: rng@48310000 {
+			compatible = "ti,omap4-rng";
+			ti,hwmods = "rng";
+			reg = <0x48310000 0x2000>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		mcasp0: mcasp@48038000 {
 			compatible = "ti,am33xx-mcasp-audio";
 			ti,hwmods = "mcasp0";
diff --git a/src/arm/am437x-cm-t43.dts b/src/arm/am437x-cm-t43.dts
index 9551c4713173..9e92d480576b 100644
--- a/src/arm/am437x-cm-t43.dts
+++ b/src/arm/am437x-cm-t43.dts
@@ -209,7 +209,6 @@
 		#interrupt-cells = <2>;
 
 		dcdc1: regulator-dcdc1 {
-			compatible = "ti,tps65218-dcdc1";
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <1144000>;
@@ -218,7 +217,6 @@
 		};
 
 		dcdc2: regulator-dcdc2 {
-			compatible = "ti,tps65218-dcdc2";
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <1378000>;
@@ -227,7 +225,6 @@
 		};
 
 		dcdc3: regulator-dcdc3 {
-			compatible = "ti,tps65218-dcdc3";
 			regulator-name = "vdcdc3";
 			regulator-suspend-enable;
 			regulator-min-microvolt = <1500000>;
@@ -237,7 +234,6 @@
 		};
 
 		dcdc5: regulator-dcdc5 {
-			compatible = "ti,tps65218-dcdc5";
 			regulator-name = "v1_0bat";
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1000000>;
@@ -246,7 +242,6 @@
 		};
 
 		dcdc6: regulator-dcdc6 {
-			compatible = "ti,tps65218-dcdc6";
 			regulator-name = "v1_8bat";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
@@ -255,7 +250,6 @@
 		};
 
 		ldo1: regulator-ldo1 {
-			compatible = "ti,tps65218-ldo1";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-boot-on;
diff --git a/src/arm/am437x-gp-evm.dts b/src/arm/am437x-gp-evm.dts
index 5bcd3aa025bc..957840cc7b78 100644
--- a/src/arm/am437x-gp-evm.dts
+++ b/src/arm/am437x-gp-evm.dts
@@ -58,7 +58,7 @@
 		default-brightness-level = <8>;
 	};
 
-	matrix_keypad: matrix_keypad@0 {
+	matrix_keypad: matrix_keypad0 {
 		compatible = "gpio-matrix-keypad";
 		debounce-delay-ms = <5>;
 		col-scan-delay-us = <2>;
@@ -513,7 +513,6 @@
 		#interrupt-cells = <2>;
 
 		dcdc1: regulator-dcdc1 {
-			compatible = "ti,tps65218-dcdc1";
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <1144000>;
@@ -522,7 +521,6 @@
 		};
 
 		dcdc2: regulator-dcdc2 {
-			compatible = "ti,tps65218-dcdc2";
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <1378000>;
@@ -531,33 +529,42 @@
 		};
 
 		dcdc3: regulator-dcdc3 {
-			compatible = "ti,tps65218-dcdc3";
 			regulator-name = "vdcdc3";
 			regulator-min-microvolt = <1500000>;
 			regulator-max-microvolt = <1500000>;
 			regulator-boot-on;
 			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
+			regulator-state-disk {
+				regulator-off-in-suspend;
+			};
 		};
+
 		dcdc5: regulator-dcdc5 {
-			compatible = "ti,tps65218-dcdc5";
 			regulator-name = "v1_0bat";
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1000000>;
 			regulator-boot-on;
 			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
 		};
 
 		dcdc6: regulator-dcdc6 {
-			compatible = "ti,tps65218-dcdc6";
 			regulator-name = "v1_8bat";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-boot-on;
 			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
 		};
 
 		ldo1: regulator-ldo1 {
-			compatible = "ti,tps65218-ldo1";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-boot-on;
@@ -897,7 +904,7 @@
 	pinctrl-0 = <&dss_pins>;
 
 	port {
-		dpi_out: endpoint@0 {
+		dpi_out: endpoint {
 			remote-endpoint = <&lcd_in>;
 			data-lines = <24>;
 		};
@@ -975,3 +982,7 @@
 	clock-names = "ext-clk", "int-clk";
 	status = "okay";
 };
+
+&cpu {
+	cpu0-supply = <&dcdc2>;
+};
diff --git a/src/arm/am437x-idk-evm.dts b/src/arm/am437x-idk-evm.dts
index 76dcfc6d5f0d..b76a7c0264a5 100644
--- a/src/arm/am437x-idk-evm.dts
+++ b/src/arm/am437x-idk-evm.dts
@@ -104,7 +104,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		switch@0 {
+		switch0 {
 			label = "power-button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
@@ -117,6 +117,58 @@
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 	};
+
+	leds-iio {
+		status = "disabled";
+		compatible = "gpio-leds";
+		led-out0 {
+			label = "out0";
+			gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out1 {
+			label = "out1";
+			gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out2 {
+			label = "out2";
+			gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out3 {
+			label = "out3";
+			gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out4 {
+			label = "out4";
+			gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out5 {
+			label = "out5";
+			gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out6 {
+			label = "out6";
+			gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out7 {
+			label = "out7";
+			gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
 };
 
 &am43xx_pinmux {
@@ -178,6 +230,24 @@
 		>;
 	};
 
+	spi1_pins_default: spi1_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x908, PIN_INPUT | MUX_MODE2)	/* mii1_col.spi1_sclk */
+			AM4372_IOPAD(0x910, PIN_INPUT | MUX_MODE2)	/* mii1_rx_er.spi1_d1 */
+			AM4372_IOPAD(0x944, PIN_OUTPUT | MUX_MODE2)	/* rmii1_ref_clk.spi1_cs0 */
+			AM4372_IOPAD(0x90c, PIN_OUTPUT | MUX_MODE7)	/* mii1_crs.gpio3_1 */
+		>;
+	};
+
+	spi1_pins_sleep: spi1_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
 	ecap0_pins_default: backlight_pins_default {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */
@@ -290,6 +360,33 @@
 	pinctrl-0 = <&i2c2_pins_default>;
 	pinctrl-1 = <&i2c2_pins_sleep>;
 	clock-frequency = <100000>;
+
+	tpic2810: tpic2810@60 {
+		compatible = "ti,tpic2810";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi1_pins_default>;
+	pinctrl-1 = <&spi1_pins_sleep>;
+	ti,pindir-d0-out-d1-in;
+
+	sn65hvs882: sn65hvs882@0 {
+		compatible = "pisosr-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		load-gpios = <&gpio3 1 GPIO_ACTIVE_LOW>;
+
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cpol;
+	};
 };
 
 &epwmss0 {
@@ -310,6 +407,10 @@
 	status = "okay";
 };
 
+&gpio3 {
+	status = "okay";
+};
+
 &gpio4 {
 	status = "okay";
 };
@@ -382,6 +483,7 @@
 };
 
 &mac {
+	slaves = <1>;
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
diff --git a/src/arm/am437x-sbc-t43.dts b/src/arm/am437x-sbc-t43.dts
index 5f750c0ed6c9..d23260d3a581 100644
--- a/src/arm/am437x-sbc-t43.dts
+++ b/src/arm/am437x-sbc-t43.dts
@@ -145,7 +145,7 @@
 	pinctrl-0 = <&dss_pinctrl_default>;
 
 	port {
-		dpi_lcd_out: endpoint@0 {
+		dpi_lcd_out: endpoint {
 			remote-endpoint = <&lcd_in>;
 			data-lines = <24>;
 		};
diff --git a/src/arm/am437x-sk-evm.dts b/src/arm/am437x-sk-evm.dts
index 5687d6b4da60..319d94205350 100644
--- a/src/arm/am437x-sk-evm.dts
+++ b/src/arm/am437x-sk-evm.dts
@@ -64,7 +64,7 @@
 		};
 	};
 
-	matrix_keypad: matrix_keypad@0 {
+	matrix_keypad: matrix_keypad0 {
 		compatible = "gpio-matrix-keypad";
 
 		pinctrl-names = "default";
@@ -93,28 +93,28 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&leds_pins>;
 
-		led@0 {
+		led0 {
 			label = "am437x-sk:red:heartbeat";
 			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 0 */
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
-		led@1 {
+		led1 {
 			label = "am437x-sk:green:mmc1";
 			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 1 */
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "am437x-sk:blue:cpu0";
 			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 2 */
 			linux,default-trigger = "cpu0";
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "am437x-sk:blue:usr3";
 			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 3 */
 			default-state = "off";
@@ -428,7 +428,6 @@
 		#interrupt-cells = <2>;
 
 		dcdc1: regulator-dcdc1 {
-			compatible = "ti,tps65218-dcdc1";
 			/* VDD_CORE limits min of OPP50 and max of OPP100 */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <912000>;
@@ -438,7 +437,6 @@
 		};
 
 		dcdc2: regulator-dcdc2 {
-			compatible = "ti,tps65218-dcdc2";
 			/* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <912000>;
@@ -448,16 +446,20 @@
 		};
 
 		dcdc3: regulator-dcdc3 {
-			compatible = "ti,tps65218-dcdc3";
 			regulator-name = "vdds_ddr";
 			regulator-min-microvolt = <1500000>;
 			regulator-max-microvolt = <1500000>;
 			regulator-boot-on;
 			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
+			regulator-state-disk {
+				regulator-off-in-suspend;
+			};
 		};
 
 		dcdc4: regulator-dcdc4 {
-			compatible = "ti,tps65218-dcdc4";
 			regulator-name = "v3_3d";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
@@ -465,8 +467,31 @@
 			regulator-always-on;
 		};
 
+		dcdc5: regulator-dcdc5 {
+			compatible = "ti,tps65218-dcdc5";
+			regulator-name = "v1_0bat";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
+		};
+
+		dcdc6: regulator-dcdc6 {
+			compatible = "ti,tps65218-dcdc6";
+			regulator-name = "v1_8bat";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
+		};
+
 		ldo1: regulator-ldo1 {
-			compatible = "ti,tps65218-ldo1";
 			regulator-name = "v1_8d";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
diff --git a/src/arm/am43x-epos-evm.dts b/src/arm/am43x-epos-evm.dts
index 3549b8c9ac49..9d35c3f07cad 100644
--- a/src/arm/am43x-epos-evm.dts
+++ b/src/arm/am43x-epos-evm.dts
@@ -32,7 +32,7 @@
 		enable-active-high;
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -67,7 +67,7 @@
 		};
 	};
 
-	matrix_keypad: matrix_keypad@0 {
+	matrix_keypad: matrix_keypad0 {
 		compatible = "gpio-matrix-keypad";
 		debounce-delay-ms = <5>;
 		col-scan-delay-us = <2>;
@@ -421,7 +421,6 @@
 		#interrupt-cells = <2>;
 
 		dcdc1: regulator-dcdc1 {
-			compatible = "ti,tps65218-dcdc1";
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <1144000>;
@@ -430,7 +429,6 @@
 		};
 
 		dcdc2: regulator-dcdc2 {
-			compatible = "ti,tps65218-dcdc2";
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <1378000>;
@@ -439,7 +437,6 @@
 		};
 
 		dcdc3: regulator-dcdc3 {
-			compatible = "ti,tps65218-dcdc3";
 			regulator-name = "vdcdc3";
 			regulator-min-microvolt = <1500000>;
 			regulator-max-microvolt = <1500000>;
@@ -448,7 +445,6 @@
 		};
 
 		dcdc4: regulator-dcdc4 {
-			compatible = "ti,tps65218-dcdc4";
 			regulator-name = "vdcdc4";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
@@ -457,21 +453,18 @@
 		};
 
 		dcdc5: regulator-dcdc5 {
-			compatible = "ti,tps65218-dcdc5";
 			regulator-name = "v1_0bat";
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1000000>;
 		};
 
 		dcdc6: regulator-dcdc6 {
-			compatible = "ti,tps65218-dcdc6";
 			regulator-name = "v1_8bat";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
 
 		ldo1: regulator-ldo1 {
-			compatible = "ti,tps65218-ldo1";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-boot-on;
@@ -754,7 +747,7 @@
 	pinctrl-0 = <&dss_pins>;
 
 	port {
-		dpi_out: endpoint@0 {
+		dpi_out: endpoint {
 			remote-endpoint = <&lcd_in>;
 			data-lines = <24>;
 		};
diff --git a/src/arm/am43xx-clocks.dtsi b/src/arm/am43xx-clocks.dtsi
index 7630ba1d89e4..d1d73b725f47 100644
--- a/src/arm/am43xx-clocks.dtsi
+++ b/src/arm/am43xx-clocks.dtsi
@@ -104,6 +104,14 @@
 		clock-div = <1>;
 	};
 
+	rng_fck: rng_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
 	ehrpwm0_tbclk: ehrpwm0_tbclk@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
diff --git a/src/arm/am571x-idk.dts b/src/arm/am571x-idk.dts
new file mode 100644
index 000000000000..ad68d1eb3bc3
--- /dev/null
+++ b/src/arm/am571x-idk.dts
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra72x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am57xx-idk-common.dtsi"
+
+/ {
+	model = "TI AM5718 IDK";
+	compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		cpu0-led {
+			label = "status0:red:cpu0";
+			gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu0";
+		};
+
+		usr0-led {
+			label = "status0:green:usr";
+			gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		heartbeat-led {
+			label = "status0:blue:heartbeat";
+			gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		usr1-led {
+			label = "status1:red:usr";
+			gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		usr2-led {
+			label = "status1:green:usr";
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		mmc0-led {
+			label = "status1:blue:mmc0";
+			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&ldo1_reg>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 0>; /* gpio 219 */
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&extcon_usb2 {
+	id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+	vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+};
diff --git a/src/arm/am572x-idk.dts b/src/arm/am572x-idk.dts
index e3acb99703e1..8350b4b34b08 100644
--- a/src/arm/am572x-idk.dts
+++ b/src/arm/am572x-idk.dts
@@ -18,16 +18,11 @@
 	compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74",
 		     "ti,dra7";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
-	extcon_usb2: extcon_usb2 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-	};
-
 	status-leds {
 		compatible = "gpio-leds";
 		cpu0-led {
@@ -76,6 +71,11 @@
 	extcon = <&extcon_usb2>;
 };
 
+&extcon_usb2 {
+	id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+	vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+};
+
 &mmc1 {
 	status = "okay";
 	vmmc-supply = <&v3_3d>;
@@ -83,3 +83,11 @@
 	bus-width = <4>;
 	cd-gpios = <&gpio6 27 0>; /* gpio 219 */
 };
+
+&sn65hvs882 {
+	load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+};
+
+&pcie1 {
+	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
diff --git a/src/arm/am57xx-beagle-x15-common.dtsi b/src/arm/am57xx-beagle-x15-common.dtsi
new file mode 100644
index 000000000000..78bee26361f1
--- /dev/null
+++ b/src/arm/am57xx-beagle-x15-common.dtsi
@@ -0,0 +1,597 @@
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra74x.dtsi"
+#include "am57xx-commercial-grade.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+	aliases {
+		rtc0 = &mcp_rtc;
+		rtc1 = &tps659038_rtc;
+		rtc2 = &rtc;
+		display0 = &hdmi0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	vdd_3v3: fixedregulator-vdd_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		vin-supply = <&regen1>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	aic_dvdd: fixedregulator-aic_dvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "aic_dvdd_fixed";
+		vin-supply = <&vdd_3v3>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		/* TPS51200 */
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		vin-supply = <&smps3_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "beagle-x15:usr0";
+			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led1 {
+			label = "beagle-x15:usr1";
+			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "beagle-x15:usr2";
+			gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "beagle-x15:usr3";
+			gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+			default-state = "off";
+		};
+	};
+
+	gpio_fan: gpio_fan {
+		/* Based on 5v 500mA AFB02505HHB */
+		compatible = "gpio-fan";
+		gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0     0>,
+				     <13000 1>;
+		#cooling-cells = <2>;
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder {
+		compatible = "ti,tpd12s015";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "BeagleBoard-X15";
+		simple-audio-card,widgets =
+			"Line", "Line Out",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Line Out",	"LLOUT",
+			"Line Out",	"RLOUT",
+			"MIC2L",	"Line In",
+			"MIC2R",	"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+		};
+
+		sound0_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3104>;
+			clocks = <&clkout2_clk>;
+		};
+	};
+};
+
+&dra7_pmx_core {
+	mmc1_pins_default: mmc1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc2_pins_default: mmc2_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+};
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		ti,system-power-controller;
+		ti,palmas-override-powerhold;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			regulators {
+				smps12_reg: smps12 {
+					/* VDD_MPU */
+					regulator-name = "smps12";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps3_reg: smps3 {
+					/* VDD_DDR */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_DSPEVE, VDD_IVA, VDD_GPU */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_CORE */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* SMPS7 unused */
+
+				smps8_reg: smps8 {
+					/* VDD_1V8 */
+					regulator-name = "smps8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* SMPS9 unused */
+
+				ldo1_reg: ldo1 {
+					/* VDD_SD / VDDSHV8  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDD_SHV5 */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDA_1V8_PHYA */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDDA_1V8_PHYB */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo9_reg: ldo9 {
+					/* VDD_RTC */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+
+				regen1: regen1 {
+					/* VDD_3V3_ON */
+					regulator-name = "regen1";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+			};
+		};
+
+		tps659038_rtc: tps659038_rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&tps659038>;
+			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+
+		tps659038_pwr_button: tps659038_pwr_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps659038>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <12>;
+		};
+
+		tps659038_gpio: tps659038_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		extcon_usb2: tps659038_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		};
+
+	};
+
+	tmp102: tmp102@48 {
+		compatible = "ti,tmp102";
+		reg = <0x48>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	tlv320aic3104: tlv320aic3104@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3104";
+		reg = <0x18>;
+		assigned-clocks = <&clkoutmux2_clk_mux>;
+		assigned-clock-parents = <&sys_clk2_dclk_div>;
+
+		status = "okay";
+		adc-settle-ms = <40>;
+
+		AVDD-supply = <&vdd_3v3>;
+		IOVDD-supply = <&vdd_3v3>;
+		DRVDD-supply = <&vdd_3v3>;
+		DVDD-supply = <&aic_dvdd>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "at,24c32";
+		reg = <0x50>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	mcp_rtc: rtc@6f {
+		compatible = "microchip,mcp7941x";
+		reg = <0x6f>;
+		interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
+				      <&dra7_pmx_core 0x424>;
+		interrupt-names = "irq", "wakeup";
+
+		vcc-supply = <&vdd_3v3>;
+		wakeup-source;
+	};
+};
+
+&gpio7 {
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&cpu0 {
+	cpu0-supply = <&smps12_reg>;
+	voltage-tolerance = <1>;
+};
+
+&uart3 {
+	status = "okay";
+	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			      <&dra7_pmx_core 0x3f8>;
+};
+
+&mac {
+	status = "okay";
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <2>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&mmc1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+};
+
+&mmc2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_default>;
+
+	vmmc-supply = <&vdd_3v3>;
+	bus-width = <8>;
+	ti,non-removable;
+	cap-mmc-dual-data-rate;
+};
+
+&sata {
+	status = "okay";
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&usb2 {
+	/*
+	 * Stand alone usage is peripheral only.
+	 * However, with some resistor modifications
+	 * this port can be used via expansion connectors
+	 * as "host" or "dual-role". If so, provide
+	 * the necessary dr_mode override in the expansion
+	 * board's DT.
+	 */
+	dr_mode = "peripheral";
+};
+
+&cpu_trips {
+	cpu_alert1: cpu_alert1 {
+		temperature = <50000>; /* millicelsius */
+		hysteresis = <2000>; /* millicelsius */
+		type = "active";
+	};
+};
+
+&cpu_cooling_maps {
+	map1 {
+		trip = <&cpu_alert1>;
+		cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
+};
+
+&thermal_zones {
+	board_thermal: board_thermal {
+		polling-delay-passive = <1250>; /* milliseconds */
+		polling-delay = <1500>; /* milliseconds */
+
+				/* sensor       ID */
+		thermal-sensors = <&tmp102     0>;
+
+		board_trips: trips {
+			board_alert0: board_alert {
+				temperature = <40000>; /* millicelsius */
+				hysteresis = <2000>; /* millicelsius */
+				type = "active";
+			};
+
+			board_crit: board_crit {
+				temperature = <105000>; /* millicelsius */
+				hysteresis = <0>; /* millicelsius */
+				type = "critical";
+			};
+		};
+
+		board_cooling_maps: cooling-maps {
+			map0 {
+				trip = <&board_alert0>;
+				cooling-device =
+				  <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+       };
+};
+
+&dss {
+	status = "ok";
+
+	vdda_video-supply = <&ldoln_reg>;
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&ldo4_reg>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
+
+&pcie1 {
+	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+};
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&mcasp3_ahclkx_mux>;
+	assigned-clock-parents = <&sys_clkin2>;
+	status = "okay";
+
+	op-mode = <0>;	/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+		status = "okay";
+	};
+};
diff --git a/src/arm/am57xx-beagle-x15-revb1.dts b/src/arm/am57xx-beagle-x15-revb1.dts
new file mode 100644
index 000000000000..ca85570629fd
--- /dev/null
+++ b/src/arm/am57xx-beagle-x15-revb1.dts
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am57xx-beagle-x15-common.dtsi"
+
+/ {
+	model = "TI AM5728 BeagleBoard-X15 rev B1";
+};
+
+&tpd12s015 {
+	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
+		<&gpio2 30 GPIO_ACTIVE_HIGH>,	/* gpio2_30, LS OE */
+		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
+};
+
+&mmc1 {
+	vmmc-supply = <&vdd_3v3>;
+	vmmc-aux-supply = <&ldo1_reg>;
+};
diff --git a/src/arm/am57xx-beagle-x15.dts b/src/arm/am57xx-beagle-x15.dts
index 81d6c3033b51..8c66f2efd283 100644
--- a/src/arm/am57xx-beagle-x15.dts
+++ b/src/arm/am57xx-beagle-x15.dts
@@ -1,822 +1,24 @@
 /*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-/dts-v1/;
 
-#include "dra74x.dtsi"
-#include "am57xx-commercial-grade.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "am57xx-beagle-x15-common.dtsi"
 
 / {
+	/* NOTE: This describes the "original" pre-production A2 revision */
 	model = "TI AM5728 BeagleBoard-X15";
-	compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
-
-	aliases {
-		rtc0 = &mcp_rtc;
-		rtc1 = &tps659038_rtc;
-		rtc2 = &rtc;
-		display0 = &hdmi0;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x80000000>;
-	};
-
-	vdd_3v3: fixedregulator-vdd_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_3v3";
-		vin-supply = <&regen1>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	aic_dvdd: fixedregulator-aic_dvdd {
-		compatible = "regulator-fixed";
-		regulator-name = "aic_dvdd_fixed";
-		vin-supply = <&vdd_3v3>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	vtt_fixed: fixedregulator-vtt {
-		/* TPS51200 */
-		compatible = "regulator-fixed";
-		regulator-name = "vtt_fixed";
-		vin-supply = <&smps3_reg>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		enable-active-high;
-		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins_default>;
-
-		led@0 {
-			label = "beagle-x15:usr0";
-			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led@1 {
-			label = "beagle-x15:usr1";
-			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "cpu0";
-			default-state = "off";
-		};
-
-		led@2 {
-			label = "beagle-x15:usr2";
-			gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led@3 {
-			label = "beagle-x15:usr3";
-			gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "ide-disk";
-			default-state = "off";
-		};
-	};
-
-	gpio_fan: gpio_fan {
-		/* Based on 5v 500mA AFB02505HHB */
-		compatible = "gpio-fan";
-		gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <0     0>,
-				     <13000 1>;
-		#cooling-cells = <2>;
-	};
-
-	hdmi0: connector {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tpd12s015_out>;
-			};
-		};
-	};
-
-	tpd12s015: encoder {
-		compatible = "ti,tpd12s015";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tpd12s015_pins>;
-
-		gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
-			<&gpio6 28 GPIO_ACTIVE_HIGH>,	/* gpio6_28, LS OE */
-			<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tpd12s015_in: endpoint {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tpd12s015_out: endpoint {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-
-	sound0: sound0 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "BeagleBoard-X15";
-		simple-audio-card,widgets =
-			"Line", "Line Out",
-			"Line", "Line In";
-		simple-audio-card,routing =
-			"Line Out",	"LLOUT",
-			"Line Out",	"RLOUT",
-			"MIC2L",	"Line In",
-			"MIC2R",	"Line In";
-		simple-audio-card,format = "dsp_b";
-		simple-audio-card,bitclock-master = <&sound0_master>;
-		simple-audio-card,frame-master = <&sound0_master>;
-		simple-audio-card,bitclock-inversion;
-
-		simple-audio-card,cpu {
-			sound-dai = <&mcasp3>;
-		};
-
-		sound0_master: simple-audio-card,codec {
-			sound-dai = <&tlv320aic3104>;
-			clocks = <&clkout2_clk>;
-		};
-	};
 };
 
-&dra7_pmx_core {
-	leds_pins_default: leds_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37a8, PIN_OUTPUT | MUX_MODE14)	/* spi1_d1.gpio7_8 */
-			DRA7XX_CORE_IOPAD(0x37ac, PIN_OUTPUT | MUX_MODE14)	/* spi1_d0.gpio7_9 */
-			DRA7XX_CORE_IOPAD(0x37c0, PIN_OUTPUT | MUX_MODE14)	/* spi2_sclk.gpio7_14 */
-			DRA7XX_CORE_IOPAD(0x37c4, PIN_OUTPUT | MUX_MODE14)	/* spi2_d1.gpio7_15 */
-		>;
-	};
-
-	i2c1_pins_default: i2c1_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda.sda */
-			DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl.scl */
-		>;
-	};
-
-	hdmi_pins: pinmux_hdmi_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1)	/* i2c2_sda.hdmi1_ddc_scl */
-			DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1)	/* i2c2_scl.hdmi1_ddc_sda */
-		>;
-	};
-
-	i2c3_pins_default: i2c3_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10)	/* mcasp1_aclkx.i2c3_sda */
-			DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10)	/* mcasp1_fsx.i2c3_scl */
-		>;
-	};
-
-	uart3_pins_default: uart3_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
-			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
-		>;
-	};
-
-	mmc1_pins_default: mmc1_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
-			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc2_pins_default: mmc2_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
-		>;
-	};
-
-	cpsw_pins_default: cpsw_pins_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tclk */
-			DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tctl */
-			DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td3 */
-			DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td2 */
-			DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td1 */
-			DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td0 */
-			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0)	/* rgmii1_rclk */
-			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0)	/* rgmii1_rctl */
-			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0)	/* rgmii1_rd3 */
-			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0)	/* rgmii1_rd2 */
-			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0)	/* rgmii1_rd1 */
-			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0)	/* rgmii1_rd0 */
-
-			/* Slave 2 */
-			DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tclk */
-			DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tctl */
-			DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td3 */
-			DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td2 */
-			DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td1 */
-			DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td0 */
-			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3)	/* rgmii2_rclk */
-			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3)	/* rgmii2_rctl */
-			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3)	/* rgmii2_rd3 */
-			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3)	/* rgmii2_rd2 */
-			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3)	/* rgmii2_rd1 */
-			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3)	/* rgmii2_rd0 */
-		>;
-
-	};
-
-	cpsw_pins_sleep: cpsw_pins_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
-
-			/* Slave 2 */
-			DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
-		>;
-	};
-
-	davinci_mdio_pins_default: davinci_mdio_pins_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_mclk */
-			DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_d */
-		>;
-	};
-
-	davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x363c, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT | MUX_MODE15)
-		>;
-	};
-
-	tps659038_pins_default: tps659038_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14)	/* wakeup0.gpio1_0 */
-		>;
-	};
-
-	tmp102_pins_default: tmp102_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_PULLUP | MUX_MODE14)	/* spi2_d0.gpio7_16 */
-		>;
-	};
-
-	mcp79410_pins_default: mcp79410_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1)	/* wakeup3.sys_nirq1 */
-		>;
-	};
-
-	usb1_pins: pinmux_usb1_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
-		>;
-	};
-
-	tpd12s015_pins: pinmux_tpd12s015_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14)		/* gpio7_10 CT_CP_HPD */
-			DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14)	/* gpio7_12 HPD */
-			DRA7XX_CORE_IOPAD(0x3770, PIN_OUTPUT | MUX_MODE14)		/* gpio6_28 LS_OE */
-		>;
-	};
-
-	clkout2_pins_default: clkout2_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3694, PIN_OUTPUT_PULLDOWN | MUX_MODE9)	/* xref_clk0.clkout2 */
-		>;
-	};
-
-	clkout2_pins_sleep: clkout2_pins_sleep {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3694, PIN_INPUT | MUX_MODE15)	/* xref_clk0.clkout2 */
-		>;
-	};
-
-	mcasp3_pins_default: mcasp3_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
-			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
-			DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
-			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
-		>;
-	};
-
-	mcasp3_pins_sleep: mcasp3_pins_sleep {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
-		>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_default>;
-	clock-frequency = <400000>;
-
-	tps659038: tps659038@58 {
-		compatible = "ti,tps659038";
-		reg = <0x58>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tps659038_pins_default>;
-
-		#interrupt-cells = <2>;
-		interrupt-controller;
-
-		ti,system-power-controller;
-
-		tps659038_pmic {
-			compatible = "ti,tps659038-pmic";
-
-			regulators {
-				smps12_reg: smps12 {
-					/* VDD_MPU */
-					regulator-name = "smps12";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps3_reg: smps3 {
-					/* VDD_DDR */
-					regulator-name = "smps3";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps45_reg: smps45 {
-					/* VDD_DSPEVE, VDD_IVA, VDD_GPU */
-					regulator-name = "smps45";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps6_reg: smps6 {
-					/* VDD_CORE */
-					regulator-name = "smps6";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1150000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				/* SMPS7 unused */
-
-				smps8_reg: smps8 {
-					/* VDD_1V8 */
-					regulator-name = "smps8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				/* SMPS9 unused */
-
-				ldo1_reg: ldo1 {
-					/* VDD_SD / VDDSHV8  */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo2_reg: ldo2 {
-					/* VDD_SHV5 */
-					regulator-name = "ldo2";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo3_reg: ldo3 {
-					/* VDDA_1V8_PHYA */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo4_reg: ldo4 {
-					/* VDDA_1V8_PHYB */
-					regulator-name = "ldo4";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo9_reg: ldo9 {
-					/* VDD_RTC */
-					regulator-name = "ldo9";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldoln_reg: ldoln {
-					/* VDDA_1V8_PLL */
-					regulator-name = "ldoln";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldousb_reg: ldousb {
-					/* VDDA_3V_USB: VDDA_USBHS33 */
-					regulator-name = "ldousb";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-				};
-
-				regen1: regen1 {
-					/* VDD_3V3_ON */
-					regulator-name = "regen1";
-					regulator-boot-on;
-					regulator-always-on;
-				};
-			};
-		};
-
-		tps659038_rtc: tps659038_rtc {
-			compatible = "ti,palmas-rtc";
-			interrupt-parent = <&tps659038>;
-			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-			wakeup-source;
-		};
-
-		tps659038_pwr_button: tps659038_pwr_button {
-			compatible = "ti,palmas-pwrbutton";
-			interrupt-parent = <&tps659038>;
-			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-			wakeup-source;
-			ti,palmas-long-press-seconds = <12>;
-		};
-
-		tps659038_gpio: tps659038_gpio {
-			compatible = "ti,palmas-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		extcon_usb2: tps659038_usb {
-			compatible = "ti,palmas-usb-vid";
-			ti,enable-vbus-detection;
-			vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-		};
-
-	};
-
-	tmp102: tmp102@48 {
-		compatible = "ti,tmp102";
-		reg = <0x48>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tmp102_pins_default>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-		#thermal-sensor-cells = <1>;
-	};
-
-	tlv320aic3104: tlv320aic3104@18 {
-		#sound-dai-cells = <0>;
-		compatible = "ti,tlv320aic3104";
-		reg = <0x18>;
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&clkout2_pins_default>;
-		pinctrl-1 = <&clkout2_pins_sleep>;
-		assigned-clocks = <&clkoutmux2_clk_mux>;
-		assigned-clock-parents = <&sys_clk2_dclk_div>;
-
-		status = "okay";
-		adc-settle-ms = <40>;
-
-		AVDD-supply = <&vdd_3v3>;
-		IOVDD-supply = <&vdd_3v3>;
-		DRVDD-supply = <&vdd_3v3>;
-		DVDD-supply = <&aic_dvdd>;
-	};
-
-	eeprom: eeprom@50 {
-		compatible = "at,24c32";
-		reg = <0x50>;
-	};
-};
-
-&i2c3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins_default>;
-	clock-frequency = <400000>;
-
-	mcp_rtc: rtc@6f {
-		compatible = "microchip,mcp7941x";
-		reg = <0x6f>;
-		interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
-				      <&dra7_pmx_core 0x424>;
-		interrupt-names = "irq", "wakeup";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&mcp79410_pins_default>;
-
-		vcc-supply = <&vdd_3v3>;
-		wakeup-source;
-	};
-};
-
-&gpio7 {
-	ti,no-reset-on-init;
-	ti,no-idle-on-init;
-};
-
-&cpu0 {
-	cpu0-supply = <&smps12_reg>;
-	voltage-tolerance = <1>;
-};
-
-&uart3 {
-	status = "okay";
-	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-			      <&dra7_pmx_core 0x3f8>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins_default>;
-};
-
-&mac {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_pins_default>;
-	pinctrl-1 = <&cpsw_pins_sleep>;
-	dual_emac;
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rgmii";
-	dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <2>;
-	phy-mode = "rgmii";
-	dual_emac_res_vlan = <2>;
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_pins_default>;
-	pinctrl-1 = <&davinci_mdio_pins_sleep>;
+&tpd12s015 {
+	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
+		<&gpio6 28 GPIO_ACTIVE_HIGH>,	/* gpio6_28, LS OE */
+		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
 };
 
 &mmc1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_default>;
-
 	vmmc-supply = <&ldo1_reg>;
-	bus-width = <4>;
-	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
-};
-
-&mmc2 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins_default>;
-
-	vmmc-supply = <&vdd_3v3>;
-	bus-width = <8>;
-	ti,non-removable;
-	cap-mmc-dual-data-rate;
-};
-
-&sata {
-	status = "okay";
-};
-
-&usb2_phy1 {
-	phy-supply = <&ldousb_reg>;
-};
-
-&usb2_phy2 {
-	phy-supply = <&ldousb_reg>;
-};
-
-&usb1 {
-	dr_mode = "host";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins>;
-};
-
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
-&usb2 {
-	/*
-	 * Stand alone usage is peripheral only.
-	 * However, with some resistor modifications
-	 * this port can be used via expansion connectors
-	 * as "host" or "dual-role". If so, provide
-	 * the necessary dr_mode override in the expansion
-	 * board's DT.
-	 */
-	dr_mode = "peripheral";
-};
-
-&cpu_trips {
-	cpu_alert1: cpu_alert1 {
-		temperature = <50000>; /* millicelsius */
-		hysteresis = <2000>; /* millicelsius */
-		type = "active";
-	};
-};
-
-&cpu_cooling_maps {
-	map1 {
-		trip = <&cpu_alert1>;
-		cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-	};
-};
-
-&thermal_zones {
-	board_thermal: board_thermal {
-		polling-delay-passive = <1250>; /* milliseconds */
-		polling-delay = <1500>; /* milliseconds */
-
-				/* sensor       ID */
-		thermal-sensors = <&tmp102     0>;
-
-		board_trips: trips {
-			board_alert0: board_alert {
-				temperature = <40000>; /* millicelsius */
-				hysteresis = <2000>; /* millicelsius */
-				type = "active";
-			};
-
-			board_crit: board_crit {
-				temperature = <105000>; /* millicelsius */
-				hysteresis = <0>; /* millicelsius */
-				type = "critical";
-			};
-		};
-
-		board_cooling_maps: cooling-maps {
-			map0 {
-				trip = <&board_alert0>;
-				cooling-device =
-				  <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-			};
-		};
-       };
-};
-
-&dss {
-	status = "ok";
-
-	vdda_video-supply = <&ldoln_reg>;
-};
-
-&hdmi {
-	status = "ok";
-	vdda-supply = <&ldo4_reg>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_pins>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&tpd12s015_in>;
-		};
-	};
-};
-
-&pcie1 {
-	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
-};
-
-&mcasp3 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&mcasp3_pins_default>;
-	pinctrl-1 = <&mcasp3_pins_sleep>;
-	assigned-clocks = <&mcasp3_ahclkx_mux>;
-	assigned-clock-parents = <&sys_clkin2>;
-	status = "okay";
-
-	op-mode = <0>;	/* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	/* 4 serializers */
-	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
-		1 2 0 0
-	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
-&mailbox5 {
-	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
-		status = "okay";
-	};
-};
-
-&mailbox6 {
-	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
-		status = "okay";
-	};
 };
diff --git a/src/arm/am57xx-cl-som-am57x.dts b/src/arm/am57xx-cl-som-am57x.dts
index 378b142ef88c..203266f88480 100644
--- a/src/arm/am57xx-cl-som-am57x.dts
+++ b/src/arm/am57xx-cl-som-am57x.dts
@@ -19,7 +19,7 @@
 	model = "CompuLab CL-SOM-AM57x";
 	compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */
 	};
@@ -29,7 +29,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&leds_pins_default>;
 
-		led@0 {
+		led0 {
 			label = "cl-som-am57x:green";
 			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/src/arm/am57xx-idk-common.dtsi b/src/arm/am57xx-idk-common.dtsi
index 0e63b9dff6e7..814a720d5c3d 100644
--- a/src/arm/am57xx-idk-common.dtsi
+++ b/src/arm/am57xx-idk-common.dtsi
@@ -43,6 +43,58 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	leds-iio {
+		status = "disabled";
+		compatible = "gpio-leds";
+		led-out0 {
+			label = "out0";
+			gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out1 {
+			label = "out1";
+			gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out2 {
+			label = "out2";
+			gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out3 {
+			label = "out3";
+			gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out4 {
+			label = "out4";
+			gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out5 {
+			label = "out5";
+			gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out6 {
+			label = "out6";
+			gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out7 {
+			label = "out7";
+			gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
 };
 
 &i2c1 {
@@ -57,6 +109,7 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		ti,system-power-controller;
+		ti,palmas-override-powerhold;
 
 		tps659038_pmic {
 			compatible = "ti,tps659038-pmic";
@@ -250,6 +303,35 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
+
+		extcon_usb2: tps659038_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			ti,enable-id-detection;
+			/* ID & VBUS GPIOs provided in board dts */
+		};
+	};
+};
+
+&mcspi3 {
+	status = "okay";
+	ti,pindir-d0-out-d1-in;
+
+	sn65hvs882: sn65hvs882@0 {
+		compatible = "pisosr-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cpol;
+	};
+
+	tpic2810: tpic2810@60 {
+		compatible = "ti,tpic2810";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
 	};
 };
 
@@ -294,7 +376,7 @@
 };
 
 &usb2 {
-	dr_mode = "otg";
+	dr_mode = "peripheral";
 };
 
 &mmc2 {
@@ -304,3 +386,52 @@
 	ti,non-removable;
 	max-frequency = <96000000>;
 };
+
+&qspi {
+	status = "okay";
+
+	spi-max-frequency = <76800000>;
+	m25p80@0 {
+		compatible = "s25fl256s1", "jedec,spi-nor";
+		spi-max-frequency = <76800000>;
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first four physical blocks
+		 * for a valid file to boot and the flash here is
+		 * 64KiB block size.
+		 */
+		partition@0 {
+			label = "QSPI.SPL";
+			reg = <0x00000000 0x000040000>;
+		};
+		partition@1 {
+			label = "QSPI.u-boot";
+			reg = <0x00040000 0x00100000>;
+		};
+		partition@2 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x00140000 0x00080000>;
+		};
+		partition@3 {
+			label = "QSPI.u-boot-env";
+			reg = <0x001c0000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.u-boot-env.backup1";
+			reg = <0x001d0000 0x0010000>;
+		};
+		partition@5 {
+			label = "QSPI.kernel";
+			reg = <0x001e0000 0x0800000>;
+		};
+		partition@6 {
+			label = "QSPI.file-system";
+			reg = <0x009e0000 0x01620000>;
+		};
+	};
+};
diff --git a/src/arm/am57xx-sbc-am57x.dts b/src/arm/am57xx-sbc-am57x.dts
index 988e99632d49..31f9be632406 100644
--- a/src/arm/am57xx-sbc-am57x.dts
+++ b/src/arm/am57xx-sbc-am57x.dts
@@ -128,7 +128,7 @@
 	vdda_video-supply = <&ldoln_reg>;
 
 	port {
-		dpi_lcd_out: endpoint@0 {
+		dpi_lcd_out: endpoint {
 			remote-endpoint = <&lcd_in>;
 			data-lines = <24>;
 		};
diff --git a/src/arm/animeo_ip.dts b/src/arm/animeo_ip.dts
index 0962f2fa3f6e..9cc372b9fb9b 100644
--- a/src/arm/animeo_ip.dts
+++ b/src/arm/animeo_ip.dts
@@ -32,15 +32,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -114,7 +105,7 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
 			status = "okay";
diff --git a/src/arm/arm-realview-eb-11mp-bbrevd-ctrevb.dts b/src/arm/arm-realview-eb-11mp-bbrevd-ctrevb.dts
new file mode 100644
index 000000000000..e18769df9fd9
--- /dev/null
+++ b/src/arm/arm-realview-eb-11mp-bbrevd-ctrevb.dts
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-11mp-ctrevb.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/*
+ * This is the EB with the new Revision D baseboard with SMSC9118 ethernet and
+ * the Rev B core tile.
+ */
+/ {
+	model = "ARM RealView Emulation Baseboard Rev D with ARM11MPCore Core Tile Rev B";
+};
diff --git a/src/arm/arm-realview-eb-11mp-bbrevd.dts b/src/arm/arm-realview-eb-11mp-bbrevd.dts
new file mode 100644
index 000000000000..26b1c69e9f43
--- /dev/null
+++ b/src/arm/arm-realview-eb-11mp-bbrevd.dts
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-11mp.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard Rev D with ARM11MPCore Rev C Core Tile";
+};
diff --git a/src/arm/arm-realview-eb-11mp-ctrevb.dts b/src/arm/arm-realview-eb-11mp-ctrevb.dts
new file mode 100644
index 000000000000..e68527b0d552
--- /dev/null
+++ b/src/arm/arm-realview-eb-11mp-ctrevb.dts
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-11mp.dts"
+
+/ {
+	model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev B";
+};
+
+/*
+ * The revision B has a distinctly different layout of the syscon, so
+ * append a specific compatible-string.
+ */
+&syscon {
+	compatible = "arm,realview-eb11mp-revb-syscon", "arm,realview-eb-syscon", "syscon", "simple-mfd";
+};
+
+&intc {
+	reg = <0x10101000 0x1000>,
+	      <0x10100100 0x100>;
+};
+
+&L2 {
+	reg = <0x10102000 0x1000>;
+};
+
+&scu {
+	reg = <0x10100000 0x100>;
+};
+
+&twd_timer {
+	reg = <0x10100600 0x20>;
+};
+
+&twd_wdog {
+	reg = <0x10100620 0x20>;
+};
+
+/*
+ * On revision B, we cannot reach the secondary interrupt
+ * controller, as a result, some peripherals that are dependent
+ * on their IRQ cannot be reached, so disable them.
+ */
+&intc_second {
+	status = "disabled";
+};
+
+&gpio0 {
+	status = "disabled";
+};
+
+&gpio1 {
+	status = "disabled";
+};
+
+&gpio2 {
+	status = "disabled";
+};
+
+&serial2 {
+	status = "disabled";
+};
+
+&serial3 {
+	status = "disabled";
+};
+
+&ssp {
+	status = "disabled";
+};
+
+&wdog {
+	status = "disabled";
+};
diff --git a/src/arm/arm-realview-eb-11mp.dts b/src/arm/arm-realview-eb-11mp.dts
index 87ff602a2a2d..aac1edd4b227 100644
--- a/src/arm/arm-realview-eb-11mp.dts
+++ b/src/arm/arm-realview-eb-11mp.dts
@@ -24,7 +24,7 @@
 #include "arm-realview-eb-mp.dtsi"
 
 / {
-	model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev C";
+	model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev C Core Tile";
 	arm,hbi = <0x146>;
 
 	/*
diff --git a/src/arm/arm-realview-eb-a9mp-bbrevd.dts b/src/arm/arm-realview-eb-a9mp-bbrevd.dts
new file mode 100644
index 000000000000..42efac7496ef
--- /dev/null
+++ b/src/arm/arm-realview-eb-a9mp-bbrevd.dts
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-a9mp.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/ {
+	model = "ARM RealView EB Baseboard Rev D Cortex A9 MPCore";
+};
diff --git a/src/arm/arm-realview-eb-bbrevd.dts b/src/arm/arm-realview-eb-bbrevd.dts
new file mode 100644
index 000000000000..f533c8b49d97
--- /dev/null
+++ b/src/arm/arm-realview-eb-bbrevd.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/* This derives from the Realview Baseboard, and overlays the new ethernet */
+#include "arm-realview-eb.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard Rev D";
+};
diff --git a/src/arm/arm-realview-eb-bbrevd.dtsi b/src/arm/arm-realview-eb-bbrevd.dtsi
new file mode 100644
index 000000000000..a79e1d1d30a7
--- /dev/null
+++ b/src/arm/arm-realview-eb-bbrevd.dtsi
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/ {
+	/* Introduce a fixed regulator for the new ethernet controller */
+	veth: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+};
+
+/*
+ * The revision D has a different ethernet controller that the elder boards:
+ * the older board uses LAN91C111 but the new one uses LAN9118.
+ */
+&ethernet {
+	compatible = "smsc,lan9118", "smsc,lan9115";
+	phy-mode = "mii";
+	smsc,irq-active-high;
+	smsc,irq-push-pull;
+	vdd33a-supply = <&veth>;
+	vddvario-supply = <&veth>;
+};
diff --git a/src/arm/arm-realview-eb.dtsi b/src/arm/arm-realview-eb.dtsi
index 1c6a040218e3..e2e9599596e2 100644
--- a/src/arm/arm-realview-eb.dtsi
+++ b/src/arm/arm-realview-eb.dtsi
@@ -51,14 +51,6 @@
 		regulator-boot-on;
         };
 
-	veth: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "veth";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-
 	xtal24mhz: xtal24mhz@24M {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -134,16 +126,15 @@
 		bank-width = <4>;
 	};
 
-	/* SMSC 9118 ethernet with PHY and EEPROM */
+	/* SMSC LAN91C111 ethernet with PHY and EEPROM */
 	ethernet: ethernet@4e000000 {
-		compatible = "smsc,lan9118", "smsc,lan9115";
+		compatible = "smsc,lan91c111";
 		reg = <0x4e000000 0x10000>;
-		phy-mode = "mii";
-		reg-io-width = <4>;
-		smsc,irq-active-high;
-		smsc,irq-push-pull;
-		vdd33a-supply = <&veth>;
-		vddvario-supply = <&veth>;
+		/*
+		 * This means the adapter can be accessed with 8, 16 or
+		 * 32 bit reads/writes.
+		 */
+		reg-io-width = <7>;
 	};
 
 	usb: usb@4f000000 {
diff --git a/src/arm/arm-realview-pbx-a9.dts b/src/arm/arm-realview-pbx-a9.dts
index db808f92dd79..90d00b407f85 100644
--- a/src/arm/arm-realview-pbx-a9.dts
+++ b/src/arm/arm-realview-pbx-a9.dts
@@ -70,13 +70,12 @@
 		 * associativity as these may be erroneously set
 		 * up by boot loader(s).
 		 */
-		cache-size = <1048576>; // 1MB
-		cache-sets = <4096>;
+		cache-size = <131072>; // 128KB
+		cache-sets = <512>;
 		cache-line-size = <32>;
 		arm,parity-disable;
-		arm,tag-latency = <1>;
-		arm,data-latency = <1 1>;
-		arm,dirty-latency = <1>;
+		arm,tag-latency = <1 1 1>;
+		arm,data-latency = <1 1 1>;
 	};
 
 	scu: scu@1f000000 {
diff --git a/src/arm/armada-370-db.dts b/src/arm/armada-370-db.dts
index 2364fc56ae13..a9419f8e17e8 100644
--- a/src/arm/armada-370-db.dts
+++ b/src/arm/armada-370-db.dts
@@ -67,7 +67,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x40000000>; /* 1 GB */
 	};
@@ -86,18 +86,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
 			ethernet@70000 {
 				pinctrl-0 = <&ge0_rgmii_pins>;
 				pinctrl-names = "default";
@@ -155,20 +143,6 @@
 				status = "okay";
 			};
 
-			spi0: spi@10600 {
-				pinctrl-0 = <&spi0_pins2>;
-				pinctrl-names = "default";
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "mx25l25635e", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <50000000>;
-				};
-			};
-
 			nand@d0000 {
 				status = "okay";
 				num-cs = <1>;
@@ -196,24 +170,6 @@
 				};
 			};
 		};
-
-		pcie-controller {
-			status = "okay";
-			/*
-			 * The two PCIe units are accessible through
-			 * both standard PCIe slots and mini-PCIe
-			 * slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
 	};
 
 	sound {
@@ -274,3 +230,49 @@
 		compatible = "linux,spdif-dir";
 	};
 };
+
+&pciec {
+	status = "okay";
+	/*
+	 * The two PCIe units are accessible through
+	 * both standard PCIe slots and mini-PCIe
+	 * slots on the board.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+
+&spi0 {
+	pinctrl-0 = <&spi0_pins2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mx25l25635e", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+	};
+};
+
diff --git a/src/arm/armada-370-dlink-dns327l.dts b/src/arm/armada-370-dlink-dns327l.dts
index e2a363b1dd8a..aeedc463daa6 100644
--- a/src/arm/armada-370-dlink-dns327l.dts
+++ b/src/arm/armada-370-dlink-dns327l.dts
@@ -62,7 +62,7 @@
 		stdout-path = &uart0;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MiB */
 	};
@@ -72,20 +72,6 @@
 			MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
 			MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 			sata@a0000 {
 				nr-ports = <2>;
@@ -262,6 +248,20 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
 &pinctrl {
 	sata_l_white_pin: sata-l-white-pin {
 		marvell,pins = "mpp57";
diff --git a/src/arm/armada-370-mirabox.dts b/src/arm/armada-370-mirabox.dts
index d5e19cd4d256..a1425409e570 100644
--- a/src/arm/armada-370-mirabox.dts
+++ b/src/arm/armada-370-mirabox.dts
@@ -54,7 +54,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MB */
 	};
@@ -64,22 +64,6 @@
 			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
 			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
-		pcie-controller {
-			status = "okay";
-
-			/* Internal mini-PCIe connector */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Connected on the PCB to a USB 3.0 XHCI controller */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 			serial@12000 {
 				status = "okay";
@@ -113,17 +97,6 @@
 				};
 			};
 
-			mdio {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
 			ethernet@70000 {
 				pinctrl-0 = <&ge0_rgmii_pins>;
 				pinctrl-names = "default";
@@ -197,6 +170,34 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	/* Internal mini-PCIe connector */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Connected on the PCB to a USB 3.0 XHCI controller */
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &pinctrl {
 	pwr_led_pin: pwr-led-pin {
 		marvell,pins = "mpp63";
diff --git a/src/arm/armada-370-netgear-rn102.dts b/src/arm/armada-370-netgear-rn102.dts
index 39181b3fa90d..6bd9265f1062 100644
--- a/src/arm/armada-370-netgear-rn102.dts
+++ b/src/arm/armada-370-netgear-rn102.dts
@@ -56,7 +56,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MB */
 	};
@@ -66,22 +66,6 @@
 			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
 			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
-		pcie-controller {
-			status = "okay";
-
-			/* Connected to Marvell 88SE9170 SATA controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Connected to FL1009 USB 3.0 controller */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 
 			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
@@ -99,14 +83,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-			};
-
 			ethernet@74000 {
 				pinctrl-0 = <&ge1_rgmii_pins>;
 				pinctrl-names = "default";
@@ -120,8 +96,11 @@
 			};
 
 			i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
 				clock-frequency = <100000>;
+
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+
 				status = "okay";
 
 				isl12057: isl12057@68 {
@@ -257,6 +236,30 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	/* Connected to Marvell 88SE9170 SATA controller */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Connected to FL1009 USB 3.0 controller */
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+};
+
 &pinctrl {
 	power_led_pin: power-led-pin {
 		marvell,pins = "mpp57";
diff --git a/src/arm/armada-370-netgear-rn104.dts b/src/arm/armada-370-netgear-rn104.dts
index 11565752b9f6..c84ab5bf1e18 100644
--- a/src/arm/armada-370-netgear-rn104.dts
+++ b/src/arm/armada-370-netgear-rn104.dts
@@ -56,7 +56,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MB */
 	};
@@ -66,22 +66,6 @@
 			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
 			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
-		pcie-controller {
-			status = "okay";
-
-			/* Connected to FL1009 USB 3.0 controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Connected to Marvell 88SE9215 SATA controller */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 
 			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
@@ -93,18 +77,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-					reg = <1>;
-				};
-			};
-
 			ethernet@70000 {
 				pinctrl-0 = <&ge0_rgmii_pins>;
 				pinctrl-names = "default";
@@ -126,8 +98,11 @@
 			};
 
 			i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
 				clock-frequency = <100000>;
+
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+
 				status = "okay";
 
 				isl12057: isl12057@68 {
@@ -279,6 +254,34 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	/* Connected to FL1009 USB 3.0 controller */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Connected to Marvell 88SE9215 SATA controller */
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+		reg = <1>;
+	};
+};
+
 &pinctrl {
 	poweroff: poweroff {
 		marvell,pins = "mpp60";
diff --git a/src/arm/armada-370-rd.dts b/src/arm/armada-370-rd.dts
index fbef730e8d37..c3fd6e49212f 100644
--- a/src/arm/armada-370-rd.dts
+++ b/src/arm/armada-370-rd.dts
@@ -67,7 +67,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MB */
 	};
@@ -77,22 +77,6 @@
 			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
 			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
-		pcie-controller {
-			status = "okay";
-
-			/* Internal mini-PCIe connector */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Internal mini-PCIe connector */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 			serial@12000 {
 				status = "okay";
@@ -102,14 +86,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-			};
-
 			ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
@@ -146,7 +122,7 @@
 				compatible = "gpio-keys";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				button@1 {
+				button {
 					label = "Software Button";
 					linux,code = <KEY_POWER>;
 					gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
@@ -196,7 +172,7 @@
 		};
 	};
 
-	dsa@0 {
+	dsa {
 		compatible = "marvell,dsa";
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -235,7 +211,32 @@
 			};
 		};
 	 };
- };
+};
+
+&pciec {
+	status = "okay";
+
+	/* Internal mini-PCIe connector */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Internal mini-PCIe connector */
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
 
 &pinctrl {
 	fan_pins: fan-pins {
diff --git a/src/arm/armada-370-seagate-nas-4bay.dts b/src/arm/armada-370-seagate-nas-4bay.dts
index ae2e1fe50ef6..eb6af53b4954 100644
--- a/src/arm/armada-370-seagate-nas-4bay.dts
+++ b/src/arm/armada-370-seagate-nas-4bay.dts
@@ -28,20 +28,7 @@
 	compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp";
 
 	soc {
-		pcie-controller {
-			/* SATA AHCI controller 88SE9170 */
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-
 		internal-regs {
-			mdio {
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
 			ethernet@74000 {
 				status = "okay";
 				pinctrl-0 = <&ge1_rgmii_pins>;
@@ -131,3 +118,17 @@
 			  1300 0>;
 	};
 };
+
+&pciec {
+	/* SATA AHCI controller 88SE9170 */
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
diff --git a/src/arm/armada-370-seagate-nas-xbay.dtsi b/src/arm/armada-370-seagate-nas-xbay.dtsi
index 3036e25c5992..e9a5b952afc0 100644
--- a/src/arm/armada-370-seagate-nas-xbay.dtsi
+++ b/src/arm/armada-370-seagate-nas-xbay.dtsi
@@ -23,7 +23,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MB */
 	};
@@ -32,15 +32,6 @@
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
 
-		pcie-controller {
-			status = "okay";
-
-			/* USB 3.0 bridge ASM1042A */
-			pcie@2,0 {
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 			serial@12000 {
 				status = "okay";
@@ -51,15 +42,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-			};
-
 			ethernet@70000 {
 				status = "okay";
 				pinctrl-0 = <&ge0_rgmii_pins>;
@@ -159,19 +141,19 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		button@1 {
+		power {
 			label = "Power button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
 			debounce-interval = <100>;
 		};
-		button@2 {
+		backup {
 			label = "Backup button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
 			debounce-interval = <100>;
 		};
-		button@3 {
+		reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
@@ -208,6 +190,25 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	/* USB 3.0 bridge ASM1042A */
+	pcie@2,0 {
+		status = "okay";
+	};
+};
+
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
 &pinctrl {
 	pinctrl-0 = <&hdd0_led_sata_pin>, <&hdd1_led_sata_pin>;
 	pinctrl-names = "default";
diff --git a/src/arm/armada-370-seagate-personal-cloud.dtsi b/src/arm/armada-370-seagate-personal-cloud.dtsi
index 1aba08e4377c..d079a89ee5a2 100644
--- a/src/arm/armada-370-seagate-personal-cloud.dtsi
+++ b/src/arm/armada-370-seagate-personal-cloud.dtsi
@@ -24,7 +24,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MB */
 	};
@@ -33,15 +33,6 @@
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
 
-		pcie-controller {
-			status = "okay";
-
-			/* USB 3.0 Bridge ASM1042A */
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 			coherency-fabric@20200 {
 				broken-idle;
@@ -51,15 +42,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-			};
-
 			ethernet@74000 {
 				status = "okay";
 				pinctrl-0 = <&ge1_rgmii_pins>;
@@ -68,26 +50,6 @@
 				phy-mode = "rgmii-id";
 			};
 
-			spi@10600 {
-				status = "okay";
-				pinctrl-0 = <&spi0_pins2>;
-				pinctrl-names = "default";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					/* MX25L8006E */
-					compatible = "mxicy,mx25l8005", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <50000000>;
-
-					partition@0 {
-						label = "u-boot";
-						reg = <0x0 0x100000>;
-					};
-				};
-			};
-
 			usb@50000 {
 				status = "okay";
 			};
@@ -127,19 +89,19 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		button@1 {
+		power {
 			label = "Power button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
 			debounce-interval = <100>;
 		};
-		button@2 {
+		reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
 			debounce-interval = <100>;
 		};
-		button@3 {
+		button {
 			label = "USB VBUS error";
 			linux,code = <KEY_UNKNOWN>;
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
@@ -163,6 +125,24 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	/* USB 3.0 Bridge ASM1042A */
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
 &pinctrl {
 	pinctrl-0 = <&sata_led_pin>;
 	pinctrl-names = "default";
@@ -176,3 +156,23 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "okay";
+	pinctrl-0 = <&spi0_pins2>;
+	pinctrl-names = "default";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/* MX25L8006E */
+		compatible = "mxicy,mx25l8005", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x100000>;
+		};
+	};
+};
diff --git a/src/arm/armada-370-synology-ds213j.dts b/src/arm/armada-370-synology-ds213j.dts
index 8ca7a4340c0f..99f9de229ea8 100644
--- a/src/arm/armada-370-synology-ds213j.dts
+++ b/src/arm/armada-370-synology-ds213j.dts
@@ -70,7 +70,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MB */
 	};
@@ -87,62 +87,6 @@
 				status = "disabled";
 			};
 
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "micron,n25q064", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <20000000>;
-
-					/*
-					 * Warning!
-					 *
-					 * Synology u-boot uses its compiled-in environment
-					 * and it seems Synology did not care to change u-boot
-					 * default configuration in order to allow saving a
-					 * modified environment at a sensible location. So,
-					 * if you do a 'saveenv' under u-boot, your modified
-					 * environment will be saved at 1MB after the start
-					 * of the flash, i.e. in the middle of the uImage.
-					 * For that reason, it is strongly advised not to
-					 * change the default environment, unless you know
-					 * what you are doing.
-					 */
-					partition@00000000 { /* u-boot */
-						label = "RedBoot";
-						reg = <0x00000000 0x000c0000>; /* 768KB */
-					};
-
-					partition@000c0000 { /* uImage */
-						label = "zImage";
-						reg = <0x000c0000 0x002d0000>; /* 2880KB */
-					};
-
-					partition@00390000 { /* uInitramfs */
-						label = "rd.gz";
-						reg = <0x00390000 0x00440000>; /* 4250KB */
-					};
-
-					partition@007d0000 { /* MAC address and serial number */
-						label = "vendor";
-						reg = <0x007d0000 0x00010000>; /* 64KB */
-					};
-
-					partition@007e0000 {
-						label = "RedBoot config";
-						reg = <0x007e0000 0x00010000>; /* 64KB */
-					};
-
-					partition@007f0000 {
-						label = "FIS directory";
-						reg = <0x007f0000 0x00010000>; /* 64KB */
-					};
-				};
-			};
-
 			i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				pinctrl-0 = <&i2c0_pins>;
@@ -183,12 +127,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				phy1: ethernet-phy@1 { /* Marvell 88E1512 */
-					reg = <1>;
-				};
-			};
-
 			ethernet@70000 {
 			       status = "okay";
 			       phy = <&phy1>;
@@ -248,7 +186,7 @@
 		pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>;
 		pinctrl-names = "default";
 
-		sata1_regulator: sata1-regulator {
+		sata1_regulator: sata1-regulator@1 {
 			compatible = "regulator-fixed";
 			reg = <1>;
 			regulator-name = "SATA1 Power";
@@ -261,7 +199,7 @@
 			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		sata2_regulator: sata2-regulator {
+		sata2_regulator: sata2-regulator@2 {
 			compatible = "regulator-fixed";
 			reg = <2>;
 			regulator-name = "SATA2 Power";
@@ -276,6 +214,12 @@
 	};
 };
 
+&mdio {
+	phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+		reg = <1>;
+	};
+};
+
 &pinctrl {
 	disk1_led_pin: disk1-led-pin {
 		marvell,pins = "mpp31";
@@ -347,3 +291,59 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+
+		/*
+		 * Warning!
+		 *
+		 * Synology u-boot uses its compiled-in environment
+		 * and it seems Synology did not care to change u-boot
+		 * default configuration in order to allow saving a
+		 * modified environment at a sensible location. So,
+		 * if you do a 'saveenv' under u-boot, your modified
+		 * environment will be saved at 1MB after the start
+		 * of the flash, i.e. in the middle of the uImage.
+		 * For that reason, it is strongly advised not to
+		 * change the default environment, unless you know
+		 * what you are doing.
+		 */
+		partition@00000000 { /* u-boot */
+			label = "RedBoot";
+			reg = <0x00000000 0x000c0000>; /* 768KB */
+		};
+
+		partition@000c0000 { /* uImage */
+			label = "zImage";
+			reg = <0x000c0000 0x002d0000>; /* 2880KB */
+		};
+
+		partition@00390000 { /* uInitramfs */
+			label = "rd.gz";
+			reg = <0x00390000 0x00440000>; /* 4250KB */
+		};
+
+		partition@007d0000 { /* MAC address and serial number */
+			label = "vendor";
+			reg = <0x007d0000 0x00010000>; /* 64KB */
+		};
+
+		partition@007e0000 {
+			label = "RedBoot config";
+			reg = <0x007e0000 0x00010000>; /* 64KB */
+		};
+
+		partition@007f0000 {
+			label = "FIS directory";
+			reg = <0x007f0000 0x00010000>; /* 64KB */
+		};
+	};
+};
diff --git a/src/arm/armada-370-xp.dtsi b/src/arm/armada-370-xp.dtsi
index a718866ba52d..b0520bdeea27 100644
--- a/src/arm/armada-370-xp.dtsi
+++ b/src/arm/armada-370-xp.dtsi
@@ -50,8 +50,6 @@
  * 370 and Armada XP SoC.
  */
 
-/include/ "skeleton64.dtsi"
-
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
 / {
@@ -86,7 +84,7 @@
 		pcie-mem-aperture = <0xf8000000 0x7e00000>;
 		pcie-io-aperture  = <0xffe00000 0x100000>;
 
-		devbus-bootcs {
+		devbus_bootcs: devbus-bootcs {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
@@ -96,7 +94,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs0 {
+		devbus_cs0: devbus-cs0 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
@@ -106,7 +104,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs1 {
+		devbus_cs1: devbus-cs1 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
@@ -116,7 +114,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs2 {
+		devbus_cs2: devbus-cs2 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
@@ -126,7 +124,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs3 {
+		devbus_cs3: devbus-cs3 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
@@ -142,32 +140,12 @@
 			#size-cells = <1>;
 			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
 
-			rtc@10300 {
+			rtc: rtc@10300 {
 				compatible = "marvell,orion-rtc";
 				reg = <0x10300 0x20>;
 				interrupts = <50>;
 			};
 
-			spi0: spi@10600 {
-				reg = <0x10600 0x28>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <30>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				reg = <0x10680 0x28>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <92>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
 			i2c0: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				#address-cells = <1>;
@@ -234,33 +212,38 @@
 				msi-controller;
 			};
 
-			coherency-fabric@20200 {
+			coherencyfab: coherency-fabric@20200 {
 				compatible = "marvell,coherency-fabric";
 				reg = <0x20200 0xb0>, <0x21010 0x1c>;
 			};
 
-			timer@20300 {
+			timer: timer@20300 {
 				reg = <0x20300 0x30>, <0x21040 0x30>;
 				interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
 			};
 
-			watchdog@20300 {
+			watchdog: watchdog@20300 {
 				reg = <0x20300 0x34>, <0x20704 0x4>;
 			};
 
-			pmsu@22000 {
+			cpurst: cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x8>;
+			};
+
+			pmsu: pmsu@22000 {
 				compatible = "marvell,armada-370-pmsu";
 				reg = <0x22000 0x1000>;
 			};
 
-			usb@50000 {
+			usb0: usb@50000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x50000 0x500>;
 				interrupts = <45>;
 				status = "disabled";
 			};
 
-			usb@51000 {
+			usb1: usb@51000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x51000 0x500>;
 				interrupts = <46>;
@@ -274,7 +257,7 @@
 				status = "disabled";
 			};
 
-			mdio: mdio {
+			mdio: mdio@72004 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "marvell,orion-mdio";
@@ -289,7 +272,7 @@
 				status = "disabled";
 			};
 
-			sata@a0000 {
+			sata: sata@a0000 {
 				compatible = "marvell,armada-370-sata";
 				reg = <0xa0000 0x5000>;
 				interrupts = <55>;
@@ -298,7 +281,7 @@
 				status = "disabled";
 			};
 
-			nand@d0000 {
+			nand: nand@d0000 {
 				compatible = "marvell,armada370-nand";
 				reg = <0xd0000 0x54>;
 				#address-cells = <1>;
@@ -308,7 +291,7 @@
 				status = "disabled";
 			};
 
-			mvsdio@d4000 {
+			sdio: mvsdio@d4000 {
 				compatible = "marvell,orion-sdio";
 				reg = <0xd4000 0x200>;
 				interrupts = <54>;
@@ -320,6 +303,42 @@
 				status = "disabled";
 			};
 		};
+
+		spi0: spi@10600 {
+			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x28>, /* control */
+			      <MBUS_ID(0x01, 0x1e) 0 0xffffffff>, /* CS0 */
+			      <MBUS_ID(0x01, 0x5e) 0 0xffffffff>, /* CS1 */
+			      <MBUS_ID(0x01, 0x9e) 0 0xffffffff>, /* CS2 */
+			      <MBUS_ID(0x01, 0xde) 0 0xffffffff>, /* CS3 */
+			      <MBUS_ID(0x01, 0x1f) 0 0xffffffff>, /* CS4 */
+			      <MBUS_ID(0x01, 0x5f) 0 0xffffffff>, /* CS5 */
+			      <MBUS_ID(0x01, 0x9f) 0 0xffffffff>, /* CS6 */
+			      <MBUS_ID(0x01, 0xdf) 0 0xffffffff>; /* CS7 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <30>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10680 {
+			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x28>, /* control */
+			      <MBUS_ID(0x01, 0x1a) 0 0xffffffff>, /* CS0 */
+			      <MBUS_ID(0x01, 0x5a) 0 0xffffffff>, /* CS1 */
+			      <MBUS_ID(0x01, 0x9a) 0 0xffffffff>, /* CS2 */
+			      <MBUS_ID(0x01, 0xda) 0 0xffffffff>, /* CS3 */
+			      <MBUS_ID(0x01, 0x1b) 0 0xffffffff>, /* CS4 */
+			      <MBUS_ID(0x01, 0x5b) 0 0xffffffff>, /* CS5 */
+			      <MBUS_ID(0x01, 0x9b) 0 0xffffffff>, /* CS6 */
+			      <MBUS_ID(0x01, 0xdb) 0 0xffffffff>; /* CS7 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <92>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
 	};
 
 	clocks {
diff --git a/src/arm/armada-370.dtsi b/src/arm/armada-370.dtsi
index 3b06aa835448..b704bcc597f7 100644
--- a/src/arm/armada-370.dtsi
+++ b/src/arm/armada-370.dtsi
@@ -50,9 +50,11 @@
  */
 
 #include "armada-370-xp.dtsi"
-/include/ "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	model = "Marvell Armada 370 family SoC";
 	compatible = "marvell,armada370", "marvell,armada-370-xp";
 
@@ -70,7 +72,7 @@
 			reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
 		};
 
-		pcie-controller {
+		pciec: pcie-controller@82000000 {
 			compatible = "marvell,armada-370-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -89,7 +91,7 @@
 				0x82000000 0x2 0     MBUS_ID(0x08, 0xe8) 0       1 0 /* Port 1.0 MEM */
 				0x81000000 0x2 0     MBUS_ID(0x08, 0xe0) 0       1 0 /* Port 1.0 IO  */>;
 
-			pcie@1,0 {
+			pcie0: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
@@ -106,7 +108,7 @@
 				status = "disabled";
 			};
 
-			pcie@2,0 {
+			pcie2: pcie@2,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
@@ -125,7 +127,7 @@
 		};
 
 		internal-regs {
-			L2: l2-cache {
+			L2: l2-cache@8000 {
 				compatible = "marvell,aurora-outer-cache";
 				reg = <0x08000 0x1000>;
 				cache-id-part = <0x100>;
@@ -134,32 +136,6 @@
 				wt-override;
 			};
 
-			/*
-			 * Default SPI pinctrl setting, can be overwritten on
-			 * board level if a different configuration is used.
-			 */
-			spi0: spi@10600 {
-				compatible = "marvell,armada-370-spi",
-						"marvell,orion-spi";
-				pinctrl-0 = <&spi0_pins1>;
-				pinctrl-names = "default";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,armada-370-spi",
-						"marvell,orion-spi";
-				pinctrl-0 = <&spi1_pins>;
-				pinctrl-names = "default";
-			};
-
-			i2c0: i2c@11000 {
-				reg = <0x11000 0x20>;
-			};
-
-			i2c1: i2c@11100 {
-				reg = <0x11100 0x20>;
-			};
-
 			gpio0: gpio@18100 {
 				compatible = "marvell,orion-gpio";
 				reg = <0x18100 0x40>;
@@ -193,22 +169,8 @@
 				interrupts = <91>;
 			};
 
-			/*
-			 * Default UART pinctrl setting without RTS/CTS, can
-			 * be overwritten on board level if a different
-			 * configuration is used.
-			 */
-			uart0: serial@12000 {
-				pinctrl-0 = <&uart0_pins>;
-				pinctrl-names = "default";
-			};
-
-			uart1: serial@12100 {
-				pinctrl-0 = <&uart1_pins>;
-				pinctrl-names = "default";
-			};
 
-			system-controller@18200 {
+			systemc: system-controller@18200 {
 				compatible = "marvell,armada-370-xp-system-controller";
 				reg = <0x18200 0x100>;
 			};
@@ -226,37 +188,18 @@
 				#clock-cells = <1>;
 			};
 
-			thermal@18300 {
+			thermal: thermal@18300 {
 				compatible = "marvell,armada370-thermal";
 				reg = <0x18300 0x4
 					0x18304 0x4>;
 				status = "okay";
 			};
 
-			sscg@18330 {
+			sscg: sscg@18330 {
 				reg = <0x18330 0x4>;
 			};
 
-			interrupt-controller@20a00 {
-				reg = <0x20a00 0x1d0>, <0x21870 0x58>;
-			};
-
-			timer@20300 {
-				compatible = "marvell,armada-370-timer";
-				clocks = <&coreclk 2>;
-			};
-
-			watchdog@20300 {
-				compatible = "marvell,armada-370-wdt";
-				clocks = <&coreclk 2>;
-			};
-
-			cpurst@20800 {
-				compatible = "marvell,armada-370-cpu-reset";
-				reg = <0x20800 0x8>;
-			};
-
-			cpu-config@21000 {
+			cpuconf: cpu-config@21000 {
 				compatible = "marvell,armada-370-cpu-config";
 				reg = <0x21000 0x8>;
 			};
@@ -271,15 +214,7 @@
 				status = "disabled";
 			};
 
-			usb@50000 {
-				clocks = <&coreclk 0>;
-			};
-
-			usb@51000 {
-				clocks = <&coreclk 0>;
-			};
-
-			xor@60800 {
+			xor0: xor@60800 {
 				compatible = "marvell,orion-xor";
 				reg = <0x60800 0x100
 				       0x60A00 0x100>;
@@ -298,7 +233,7 @@
 				};
 			};
 
-			xor@60900 {
+			xor1: xor@60900 {
 				compatible = "marvell,orion-xor";
 				reg = <0x60900 0x100
 				       0x60b00 0x100>;
@@ -317,15 +252,7 @@
 				};
 			};
 
-			ethernet@70000 {
-				compatible = "marvell,armada-370-neta";
-			};
-
-			ethernet@74000 {
-				compatible = "marvell,armada-370-neta";
-			};
-
-			crypto@90000 {
+			cesa: crypto@90000 {
 				compatible = "marvell,armada-370-crypto";
 				reg = <0x90000 0x10000>;
 				reg-names = "regs";
@@ -360,6 +287,59 @@
 	};
 };
 
+/*
+ * Default UART pinctrl setting without RTS/CTS, can be overwritten on
+ * board level if a different configuration is used.
+ */
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c0 {
+	reg = <0x11000 0x20>;
+};
+
+&i2c1 {
+	reg = <0x11100 0x20>;
+};
+
+&mpic {
+	reg = <0x20a00 0x1d0>, <0x21870 0x58>;
+};
+
+&timer {
+	compatible = "marvell,armada-370-timer";
+	clocks = <&coreclk 2>;
+};
+
+&watchdog {
+	compatible = "marvell,armada-370-wdt";
+	clocks = <&coreclk 2>;
+};
+
+&usb0 {
+	clocks = <&coreclk 0>;
+};
+
+&usb1 {
+	clocks = <&coreclk 0>;
+};
+
+&eth0 {
+	compatible = "marvell,armada-370-neta";
+};
+
+&eth1 {
+	compatible = "marvell,armada-370-neta";
+};
+
 &pinctrl {
 	compatible = "marvell,mv88f6710-pinctrl";
 
@@ -447,3 +427,19 @@
 		marvell,function = "ge1";
 	};
 };
+
+/*
+ * Default SPI pinctrl setting, can be overwritten on
+ * board level if a different configuration is used.
+ */
+&spi0 {
+	compatible = "marvell,armada-370-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi0_pins1>;
+	pinctrl-names = "default";
+};
+
+&spi1 {
+	compatible = "marvell,armada-370-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+};
diff --git a/src/arm/armada-375-db.dts b/src/arm/armada-375-db.dts
index cded5f0a262d..ef45cbeb3e7d 100644
--- a/src/arm/armada-375-db.dts
+++ b/src/arm/armada-375-db.dts
@@ -58,7 +58,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x40000000>; /* 1 GB */
 	};
@@ -69,138 +69,141 @@
 			  MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
 			  MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
 
-		internal-regs {
-			spi@10600 {
-				pinctrl-0 = <&spi0_pins>;
-				pinctrl-names = "default";
-				/*
-				 * SPI conflicts with NAND, so we disable it
-				 * here, and select NAND as the enabled device
-				 * by default.
-				 */
-				status = "disabled";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-			};
-
-			i2c@11100 {
-				status = "okay";
-				clock-frequency = <100000>;
-				pinctrl-0 = <&i2c1_pins>;
-				pinctrl-names = "default";
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			pinctrl {
-				sdio_st_pins: sdio-st-pins {
-					marvell,pins = "mpp44", "mpp45";
-					marvell,function = "gpio";
-				};
-			};
-
-			sata@a0000 {
-				status = "okay";
-				nr-ports = <2>;
-			};
-
-			nand: nand@d0000 {
-				pinctrl-0 = <&nand_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "U-Boot";
-					reg = <0 0x800000>;
-				};
-				partition@800000 {
-					label = "Linux";
-					reg = <0x800000 0x800000>;
-				};
-				partition@1000000 {
-					label = "Filesystem";
-					reg = <0x1000000 0x3f000000>;
-				};
-			};
-
-			usb@54000 {
-				status = "okay";
-			};
-
-			usb3@58000 {
-				status = "okay";
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins &sdio_st_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-				wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy3: ethernet-phy@3 {
-					reg = <3>;
-				};
-			};
-
-			ethernet@f0000 {
-				status = "okay";
-
-				eth0@c4000 {
-					status = "okay";
-					phy = <&phy0>;
-					phy-mode = "rgmii-id";
-				};
-
-				eth1@c5000 {
-					status = "okay";
-					phy = <&phy3>;
-					phy-mode = "gmii";
-				};
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-			/*
-			 * The two PCIe units are accessible through
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
 	};
 };
+&pciec {
+	status = "okay";
+};
+
+/*
+ * The two PCIe units are accessible through
+ * standard PCIe slots on the board.
+ */
+&pcie0 {
+	/* Port 0, Lane 0 */
+	status = "okay";
+};
+
+&pcie1 {
+	/* Port 1, Lane 0 */
+	status = "okay";
+};
+
+
+&spi0 {
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+
+	/*
+	 * SPI conflicts with NAND, so we disable it here, and
+	 * select NAND as the enabled device by default.
+	 */
+
+	status = "disabled";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&pinctrl {
+	sdio_st_pins: sdio-st-pins {
+		marvell,pins = "mpp44", "mpp45";
+		marvell,function = "gpio";
+	};
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&nand {
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	num-cs = <1>;
+	marvell,nand-keep-config;
+	marvell,nand-enable-arbiter;
+	nand-on-flash-bbt;
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+
+	partition@0 {
+		label = "U-Boot";
+		reg = <0 0x800000>;
+	};
+	partition@800000 {
+		label = "Linux";
+		reg = <0x800000 0x800000>;
+	};
+	partition@1000000 {
+		label = "Filesystem";
+		reg = <0x1000000 0x3f000000>;
+	};
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&sdio {
+	pinctrl-0 = <&sdio_pins &sdio_st_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
+&ethernet {
+	status = "okay";
+};
+
+
+&eth0 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&eth1 {
+	status = "okay";
+	phy = <&phy3>;
+	phy-mode = "gmii";
+};
diff --git a/src/arm/armada-375.dtsi b/src/arm/armada-375.dtsi
index cc952cf8ec30..f515591e8733 100644
--- a/src/arm/armada-375.dtsi
+++ b/src/arm/armada-375.dtsi
@@ -45,7 +45,6 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/phy/phy.h>
@@ -53,6 +52,9 @@
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	model = "Marvell Armada 375 family SoC";
 	compatible = "marvell,armada375";
 
@@ -65,7 +67,7 @@
 	};
 
 	clocks {
-		/* 2 GHz fixed main PLL */
+		/* 1 GHz fixed main PLL */
 		mainpll: mainpll {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
@@ -84,12 +86,12 @@
 		#size-cells = <0>;
 		enable-method = "marvell,armada-375-smp";
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 		};
-		cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
@@ -115,7 +117,7 @@
 			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
 		};
 
-		devbus-bootcs {
+		devbus_bootcs: devbus-bootcs {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
@@ -125,7 +127,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs0 {
+		devbus_cs0: devbus-cs0 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
@@ -135,7 +137,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs1 {
+		devbus_cs1: devbus-cs1 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
@@ -145,7 +147,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs2 {
+		devbus_cs2: devbus-cs2 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
@@ -155,7 +157,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs3 {
+		devbus_cs3: devbus-cs3 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
@@ -182,12 +184,12 @@
 				prefetch-data = <1>;
 			};
 
-			scu@c000 {
+			scu: scu@c000 {
 				compatible = "arm,cortex-a9-scu";
 				reg = <0xc000 0x58>;
 			};
 
-			timer@c600 {
+			timer0: timer@c600 {
 				compatible = "arm,cortex-a9-twd-timer";
 				reg = <0xc600 0x20>;
 				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
@@ -203,7 +205,7 @@
 				      <0xc100 0x100>;
 			};
 
-			mdio {
+			mdio: mdio@c0054 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "marvell,orion-mdio";
@@ -212,7 +214,7 @@
 			};
 
 			/* Network controller */
-			ethernet@f0000 {
+			ethernet: ethernet@f0000 {
 				compatible = "marvell,armada-375-pp2";
 				reg = <0xf0000 0xa000>, /* Packet Processor regs */
 				      <0xc0000 0x3060>, /* LMS regs */
@@ -222,20 +224,20 @@
 				clock-names = "pp_clk", "gop_clk";
 				status = "disabled";
 
-				eth0: eth0@c4000 {
+				eth0: eth0 {
 					interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 					port-id = <0>;
 					status = "disabled";
 				};
 
-				eth1: eth1@c5000 {
+				eth1: eth1 {
 					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 					port-id = <1>;
 					status = "disabled";
 				};
 			};
 
-			rtc@10300 {
+			rtc: rtc@10300 {
 				compatible = "marvell,orion-rtc";
 				reg = <0x10300 0x20>;
 				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
@@ -307,7 +309,7 @@
 				status = "disabled";
 			};
 
-			pinctrl {
+			pinctrl: pinctrl@18000 {
 				compatible = "marvell,mv88f6720-pinctrl";
 				reg = <0x18000 0x24>;
 
@@ -382,7 +384,7 @@
 				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			system-controller@18200 {
+			systemc: system-controller@18200 {
 				compatible = "marvell,armada-375-system-controller";
 				reg = <0x18200 0x100>;
 			};
@@ -415,7 +417,7 @@
 				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			timer@20300 {
+			timer1: timer@20300 {
 				compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
 				reg = <0x20300 0x30>, <0x21040 0x30>;
 				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
@@ -428,24 +430,24 @@
 				clock-names = "nbclk", "fixed";
 			};
 
-			watchdog@20300 {
+			watchdog: watchdog@20300 {
 				compatible = "marvell,armada-375-wdt";
 				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
 				clocks = <&coreclk 0>, <&refclk>;
 				clock-names = "nbclk", "fixed";
 			};
 
-			cpurst@20800 {
+			cpurst: cpurst@20800 {
 				compatible = "marvell,armada-370-cpu-reset";
 				reg = <0x20800 0x10>;
 			};
 
-			coherency-fabric@21010 {
+			coherencyfab: coherency-fabric@21010 {
 				compatible = "marvell,armada-375-coherency-fabric";
 				reg = <0x21010 0x1c>;
 			};
 
-			usb@50000 {
+			usb0: usb@50000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x50000 0x500>;
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
@@ -455,7 +457,7 @@
 				status = "disabled";
 			};
 
-			usb@54000 {
+			usb1: usb@54000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x54000 0x500>;
 				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
@@ -463,7 +465,7 @@
 				status = "disabled";
 			};
 
-			usb3@58000 {
+			usb2: usb3@58000 {
 				compatible = "marvell,armada-375-xhci";
 				reg = <0x58000 0x20000>,<0x5b880 0x80>;
 				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
@@ -473,7 +475,7 @@
 				status = "disabled";
 			};
 
-			xor@60800 {
+			xor0: xor@60800 {
 				compatible = "marvell,orion-xor";
 				reg = <0x60800 0x100
 				       0x60A00 0x100>;
@@ -493,7 +495,7 @@
 				};
 			};
 
-			xor@60900 {
+			xor1: xor@60900 {
 				compatible = "marvell,orion-xor";
 				reg = <0x60900 0x100
 				       0x60b00 0x100>;
@@ -513,7 +515,7 @@
 				};
 			};
 
-			crypto@90000 {
+			cesa: crypto@90000 {
 				compatible = "marvell,armada-375-crypto";
 				reg = <0x90000 0x10000>;
 				reg-names = "regs";
@@ -528,7 +530,7 @@
 				marvell,crypto-sram-size = <0x800>;
 			};
 
-			sata@a0000 {
+			sata: sata@a0000 {
 				compatible = "marvell,armada-370-sata";
 				reg = <0xa0000 0x5000>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -537,7 +539,7 @@
 				status = "disabled";
 			};
 
-			nand@d0000 {
+			nand: nand@d0000 {
 				compatible = "marvell,armada370-nand";
 				reg = <0xd0000 0x54>;
 				#address-cells = <1>;
@@ -547,7 +549,7 @@
 				status = "disabled";
 			};
 
-			mvsdio@d4000 {
+			sdio: mvsdio@d4000 {
 				compatible = "marvell,orion-sdio";
 				reg = <0xd4000 0x200>;
 				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -559,7 +561,7 @@
 				status = "disabled";
 			};
 
-			thermal@e8078 {
+			thermal: thermal@e8078 {
 				compatible = "marvell,armada375-thermal";
 				reg = <0xe8078 0x4>, <0xe807c 0x8>;
 				status = "okay";
@@ -580,7 +582,7 @@
 			};
 		};
 
-		pcie-controller {
+		pciec: pcie-controller@82000000 {
 			compatible = "marvell,armada-370-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -599,7 +601,7 @@
 				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
 				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO  */>;
 
-			pcie@1,0 {
+			pcie0: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
@@ -616,7 +618,7 @@
 				status = "disabled";
 			};
 
-			pcie@2,0 {
+			pcie1: pcie@2,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
diff --git a/src/arm/armada-385-db-ap.dts b/src/arm/armada-385-db-ap.dts
index 2d3fd6e76e2c..db5b9f6b615d 100644
--- a/src/arm/armada-385-db-ap.dts
+++ b/src/arm/armada-385-db-ap.dts
@@ -65,20 +65,6 @@
 			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
-			spi1: spi@10680 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi1_pins>;
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "st,m25p128", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <54000000>;
-				};
-			};
-
 			i2c0: i2c@11000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins>;
@@ -155,6 +141,10 @@
 				bm,pool-short = <3>;
 			};
 
+			usb@58000 {
+				status = "okay";
+			};
+
 			/* CON4 */
 			ethernet@70000 {
 				pinctrl-names = "default";
@@ -178,15 +168,35 @@
 
 			nfc: flash@d0000 {
 				status = "okay";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
 				num-cs = <1>;
 				nand-ecc-strength = <4>;
 				nand-ecc-step-size = <512>;
 				marvell,nand-keep-config;
 				marvell,nand-enable-arbiter;
 				nand-on-flash-bbt;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "U-Boot";
+						reg = <0x00000000 0x00800000>;
+						read-only;
+					};
+
+					partition@800000 {
+						label = "uImage";
+						reg = <0x00800000 0x00400000>;
+						read-only;
+					};
+
+					partition@c00000 {
+						label = "Root";
+						reg = <0x00c00000 0x3f400000>;
+					};
+				};
 			};
 
 			usb3@f0000 {
@@ -239,3 +249,17 @@
 		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 	};
 };
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <54000000>;
+	};
+};
diff --git a/src/arm/armada-385-linksys.dtsi b/src/arm/armada-385-linksys.dtsi
index 22f7a13e20b4..8f0e508f64ae 100644
--- a/src/arm/armada-385-linksys.dtsi
+++ b/src/arm/armada-385-linksys.dtsi
@@ -62,11 +62,6 @@
 			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
 
 		internal-regs {
-
-			spi@10600 {
-				status = "disabled";
-			};
-
 			i2c@11000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins>;
@@ -332,3 +327,7 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "disabled";
+};
diff --git a/src/arm/armada-385-turris-omnia.dts b/src/arm/armada-385-turris-omnia.dts
new file mode 100644
index 000000000000..ab49acb2d452
--- /dev/null
+++ b/src/arm/armada-385-turris-omnia.dts
@@ -0,0 +1,340 @@
+/*
+ * Device Tree file for the Turris Omnia
+ *
+ * Copyright (C) 2016 Uwe Kleine-König <uwe@kleine-koenig.org>
+ * Copyright (C) 2016 Tomas Hlavacek <tmshlvkc@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Schematic available at https://www.turris.cz/doc/_media/rtrom01-schema.pdf
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-385.dtsi"
+
+/ {
+	model = "Turris Omnia";
+	compatible = "cznic,turris-omnia", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1024 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+
+		internal-regs {
+
+			/* USB part of the PCIe2/USB 2.0 port */
+			usb@58000 {
+				status = "okay";
+			};
+
+			sata@a8000 {
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sdhci_pins>;
+				status = "okay";
+
+				bus-width = <8>;
+				no-1-8-v;
+				non-removable;
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+
+			pcie@3,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
+
+/* Connected to 88E6176 switch, port 6 */
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	status = "okay";
+	phy-mode = "rgmii-id";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+/* Connected to 88E6176 switch, port 5 */
+&eth1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ge1_rgmii_pins>;
+	status = "okay";
+	phy-mode = "rgmii-id";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+/* WAN port */
+&eth2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy = <&phy1>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	i2cmux@70 {
+		compatible = "nxp,pca9547";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		status = "okay";
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			/* STM32F0 command interface at address 0x2a */
+			/* leds device (in STM32F0) at address 0x2b */
+
+			eeprom@54 {
+				compatible = "at,24c64";
+				reg = <0x54>;
+
+				/* The EEPROM contains data for bootloader.
+				 * Contents:
+				 * 	struct omnia_eeprom {
+				 * 		u32 magic; (=0x0341a034 in LE)
+				 *		u32 ramsize; (in GiB)
+				 * 		char regdomain[4];
+				 * 		u32 crc32;
+				 * 	};
+				 */
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			/* routed to PCIe0/mSATA connector (CN7A) */
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			/* routed to PCIe1/USB2 connector (CN61A) */
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			/* routed to PCIe2 connector (CN62A) */
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			/* routed to SFP+ */
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			/* ATSHA204A at address 0x64 */
+		};
+
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			/* exposed on pin header */
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			pcawan: gpio@71 {
+				/*
+				 * GPIO expander for SFP+ signals and
+				 * and phy irq
+				 */
+				compatible = "nxp,pca9538";
+				reg = <0x71>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&pcawan_pins>;
+
+				interrupt-parent = <&gpio1>;
+				interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+
+	phy1: phy@1 {
+		status = "okay";
+		compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+
+		/* irq is connected to &pcawan pin 7 */
+	};
+
+	/* Switch MV88E7176 at address 0x10 */
+};
+
+&pinctrl {
+	pcawan_pins: pcawan-pins {
+		marvell,pins = "mpp46";
+		marvell,function = "gpio";
+	};
+
+	spi0cs0_pins: spi0cs0-pins {
+		marvell,pins = "mpp25";
+		marvell,function = "spi0";
+	};
+
+	spi0cs1_pins: spi0cs1-pins {
+		marvell,pins = "mpp26";
+		marvell,function = "spi0";
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins &spi0cs0_pins>;
+	status = "okay";
+
+	spi-nor@0 {
+		compatible = "spansion,s25fl164k", "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x00100000>;
+				label = "U-Boot";
+			};
+
+			partition@100000 {
+				reg = <0x00100000 0x00700000>;
+				label = "Rescue system";
+			};
+		};
+	};
+
+	/* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */
+};
+
+&uart0 {
+	/* Pin header CN10 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	/* Pin header CN11 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
diff --git a/src/arm/armada-388-clearfog.dts b/src/arm/armada-388-clearfog.dts
index c60206efb583..71ce201c903e 100644
--- a/src/arm/armada-388-clearfog.dts
+++ b/src/arm/armada-388-clearfog.dts
@@ -239,22 +239,6 @@
 				status = "okay";
 			};
 
-			mdio@72004 {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-
-				phy_dedicated: ethernet-phy@0 {
-					/*
-					 * Annoyingly, the marvell phy driver
-					 * configures the LED register, rather
-					 * than preserving reset-loaded setting.
-					 * We undo that rubbish here.
-					 */
-					marvell,reg-init = <3 16 0 0x101e>;
-					reg = <0>;
-				};
-			};
-
 			pinctrl@18000 {
 				clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
 					marvell,pins = "mpp46";
@@ -331,30 +315,6 @@
 				status = "okay";
 			};
 
-			spi@10680 {
-				/*
-				 * We don't seem to have the W25Q32 on the
-				 * A1 Rev 2.0 boards, so disable SPI.
-				 * CS0: W25Q32 (doesn't appear to be present)
-				 * CS1:
-				 * CS2: mikrobus
-				 */
-				pinctrl-0 = <&spi1_pins
-					     &clearfog_spi1_cs_pins
-					     &mikro_spi_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "w25q32", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <3000000>;
-					status = "disabled";
-				};
-			};
-
 			usb@58000 {
 				/* CON3, nearest  power. */
 				status = "okay";
@@ -406,12 +366,12 @@
 
 			port@0 {
 				reg = <0>;
-				label = "lan1";
+				label = "lan5";
 			};
 
 			port@1 {
 				reg = <1>;
-				label = "lan2";
+				label = "lan4";
 			};
 
 			port@2 {
@@ -421,12 +381,12 @@
 
 			port@3 {
 				reg = <3>;
-				label = "lan4";
+				label = "lan2";
 			};
 
 			port@4 {
 				reg = <4>;
-				label = "lan5";
+				label = "lan1";
 			};
 
 			port@5 {
@@ -460,3 +420,27 @@
 		};
 	};
 };
+
+&spi1 {
+	/*
+	 * We don't seem to have the W25Q32 on the
+	 * A1 Rev 2.0 boards, so disable SPI.
+	 * CS0: W25Q32 (doesn't appear to be present)
+	 * CS1:
+	 * CS2: mikrobus
+	 */
+	pinctrl-0 = <&spi1_pins
+		     &clearfog_spi1_cs_pins
+		     &mikro_spi_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <3000000>;
+		status = "disabled";
+	};
+};
diff --git a/src/arm/armada-388-db.dts b/src/arm/armada-388-db.dts
index ea93ed727030..de26c762239c 100644
--- a/src/arm/armada-388-db.dts
+++ b/src/arm/armada-388-db.dts
@@ -70,18 +70,6 @@
 			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
-			spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "w25q32", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
 			i2c@11000 {
 				status = "okay";
 				clock-frequency = <100000>;
@@ -201,3 +189,16 @@
 		};
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
+
diff --git a/src/arm/armada-388-gp.dts b/src/arm/armada-388-gp.dts
index fd75e5e9550f..895fa6cfa15a 100644
--- a/src/arm/armada-388-gp.dts
+++ b/src/arm/armada-388-gp.dts
@@ -64,21 +64,6 @@
 			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
-			spi@10600 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi0_pins>;
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "st,m25p128", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <50000000>;
-					m25p,fast-read;
-				};
-			};
-
 			i2c@11000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins>;
@@ -433,3 +418,18 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+	};
+};
diff --git a/src/arm/armada-388-rd.dts b/src/arm/armada-388-rd.dts
index 853f9735cc70..dd3462ddb6b9 100644
--- a/src/arm/armada-388-rd.dts
+++ b/src/arm/armada-388-rd.dts
@@ -70,18 +70,6 @@
 			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
 
 		internal-regs {
-			spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "st,m25p128", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
 			i2c@11000 {
 				status = "okay";
 				clock-frequency = <100000>;
@@ -142,3 +130,16 @@
 		};
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
+
diff --git a/src/arm/armada-38x.dtsi b/src/arm/armada-38x.dtsi
index 3312be6c82cc..7450e9fea45d 100644
--- a/src/arm/armada-38x.dtsi
+++ b/src/arm/armada-38x.dtsi
@@ -170,30 +170,6 @@
 				      <0xc100 0x100>;
 			};
 
-			spi0: spi@10600 {
-				compatible = "marvell,armada-380-spi",
-						"marvell,orion-spi";
-				reg = <0x10600 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,armada-380-spi",
-						"marvell,orion-spi";
-				reg = <0x10680 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
 			i2c0: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x20>;
@@ -287,6 +263,15 @@
 					marvell,function = "spi1";
 				};
 
+				nand_pins: nand-pins {
+					marvell,pins = "mpp22", "mpp34", "mpp23",
+						       "mpp33", "mpp38", "mpp28",
+						       "mpp40", "mpp42", "mpp35",
+						       "mpp36", "mpp25", "mpp30",
+						       "mpp32";
+					marvell,function = "dev";
+				};
+
 				uart0_pins: uart-pins-0 {
 					marvell,pins = "mpp0", "mpp1";
 					marvell,function = "ua0";
@@ -649,10 +634,34 @@
 			no-memory-wc;
 			status = "disabled";
 		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,armada-380-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10680 {
+			compatible = "marvell,armada-380-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
 	};
 
 	clocks {
-		/* 2 GHz fixed main PLL */
+		/* 1 GHz fixed main PLL */
 		mainpll: mainpll {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
diff --git a/src/arm/armada-390-db.dts b/src/arm/armada-390-db.dts
new file mode 100644
index 000000000000..34e279d973c8
--- /dev/null
+++ b/src/arm/armada-390-db.dts
@@ -0,0 +1,175 @@
+/*
+ * Device Tree file for Marvell Armada 390 Development Board
+ * (DB-88F6920)
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Grzegorz Jaszczyk <jaz@semihalf.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-390.dtsi"
+
+/ {
+	model = "Marvell Armada 390 Development Board";
+	compatible = "marvell,a390-db", "marvell,armada390";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+
+				eeprom@50 {
+					compatible = "atmel,24c64";
+					reg = <0x50>;
+				};
+			};
+
+			/* CON104 */
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* CON97 */
+			usb@58000 {
+				status = "okay";
+			};
+
+			flash@d0000 {
+				status = "okay";
+				pinctrl-0 = <&nand_pins>;
+				pinctrl-names = "default";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+				nand-ecc-strength = <8>;
+				nand-ecc-step-size = <512>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "U-Boot";
+						reg = <0 0x800000>;
+					};
+					partition@800000 {
+						label = "Linux";
+						reg = <0x800000 0x800000>;
+					};
+					partition@1000000 {
+						label = "Filesystem";
+						reg = <0x1000000 0x3f000000>;
+					};
+				};
+			};
+
+			/* CON98 */
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			/* CON30 */
+			pcie@1,0 {
+				status = "okay";
+			};
+
+			/* CON44 */
+			pcie@2,0 {
+				status = "okay";
+			};
+
+			/* CON61 */
+			pcie@3,0 {
+				status = "okay";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+
+	spi-flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13",
+			     "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x400000>;
+			};
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x400000 0xc00000>;
+			};
+		};
+	};
+};
diff --git a/src/arm/armada-390.dtsi b/src/arm/armada-390.dtsi
index 094e39c66039..6cd18d8aaac7 100644
--- a/src/arm/armada-390.dtsi
+++ b/src/arm/armada-390.dtsi
@@ -47,6 +47,8 @@
 #include "armada-39x.dtsi"
 
 / {
+	compatible = "marvell,armada390";
+
 	soc {
 		internal-regs {
 			pinctrl@18000 {
@@ -54,4 +56,5 @@
 				reg = <0x18000 0x20>;
 			};
 		};
+	};
 };
diff --git a/src/arm/armada-395-gp.dts b/src/arm/armada-395-gp.dts
new file mode 100644
index 000000000000..2cdbba804c1e
--- /dev/null
+++ b/src/arm/armada-395-gp.dts
@@ -0,0 +1,163 @@
+/*
+ * Device Tree file for Marvell Armada 395 GP board
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Grzegorz Jaszczyk <jaz@semihalf.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-395.dtsi"
+
+/ {
+	model = "Marvell Armada 395 GP Board";
+	compatible = "marvell,a395-gp", "marvell,armada395",
+		     "marvell,armada390";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+
+				eeprom@57 {
+					compatible = "atmel,24c64";
+					reg = <0x57>;
+				};
+			};
+
+			serial@12000 {
+				/*
+				 * Exported on the micro USB connector CON17
+				 * through an FTDI
+				 */
+				status = "okay";
+			};
+
+			/* CON1 */
+			usb@58000 {
+				status = "okay";
+			};
+
+			/* CON2 */
+			sata@a8000 {
+				status = "okay";
+			};
+
+			flash@d0000 {
+				status = "okay";
+				pinctrl-0 = <&nand_pins>;
+				pinctrl-names = "default";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "U-Boot";
+						reg = <0x00000000 0x00600000>;
+						read-only;
+					};
+
+					partition@800000 {
+						label = "uImage";
+						reg = <0x00600000 0x00400000>;
+						read-only;
+					};
+
+					partition@1000000 {
+						label = "Root";
+						reg = <0x00a00000 0x3f600000>;
+					};
+				};
+			};
+
+			/* CON18 */
+			sdhci@d8000 {
+				clock-frequency = <200000000>;
+				broken-cd;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+				no-1-8-v;
+			};
+
+			/* CON4 */
+			usb3@f0000 {
+				status = "okay";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			/*
+			 * The two PCIe units are accessible through
+			 * mini PCIe slot on the board.
+			 */
+
+			/* CON7 */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+
+			/* CON8 */
+			pcie@4,0 {
+				/* Port 3, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/src/arm/armada-395.dtsi b/src/arm/armada-395.dtsi
new file mode 100644
index 000000000000..ab5dc49f2bff
--- /dev/null
+++ b/src/arm/armada-395.dtsi
@@ -0,0 +1,76 @@
+/*
+ * Device Tree Include file for Marvell Armada 395 SoC.
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Grzegorz Jaszczyk <jaz@semihalf.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armada-39x.dtsi"
+
+/ {
+	compatible = "marvell,armada395", "marvell,armada390";
+
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6925-pinctrl";
+				reg = <0x18000 0x20>;
+			};
+
+			sata@a8000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xa8000 0x2000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 15>;
+				status = "disabled";
+			};
+
+			usb3@f0000 {
+				compatible = "marvell,armada-380-xhci";
+				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/src/arm/armada-398-db.dts b/src/arm/armada-398-db.dts
index 788c3badb681..268c8349c884 100644
--- a/src/arm/armada-398-db.dts
+++ b/src/arm/armada-398-db.dts
@@ -65,30 +65,6 @@
 			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
 
 		internal-regs {
-			spi@10680 {
-				status = "okay";
-				pinctrl-0 = <&spi1_pins>;
-				pinctrl-names = "default";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "n25q128a13", "jedec,spi-nor";
-					reg = <0>;
-					spi-max-frequency = <108000000>;
-
-					partition@0 {
-						label = "U-Boot";
-						reg = <0 0x400000>;
-					};
-
-					partition@400000 {
-						label = "Filesystem";
-						reg = <0x400000 0x1000000>;
-					};
-				};
-			};
-
 			i2c@11000 {
 				pinctrl-0 = <&i2c0_pins>;
 				pinctrl-names = "default";
@@ -108,6 +84,10 @@
 				status = "okay";
 			};
 
+			usb@58000 {
+				status = "okay";
+			};
+
 			flash@d0000 {
 				status = "okay";
 				pinctrl-0 = <&nand_pins>;
@@ -132,6 +112,10 @@
 					reg = <0x1000000 0x3f000000>;
 				};
 			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
 		};
 
 		pcie-controller {
@@ -151,3 +135,27 @@
 		};
 	};
 };
+
+&spi1 {
+	status = "okay";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0 0x400000>;
+		};
+
+		partition@400000 {
+			label = "Filesystem";
+			reg = <0x400000 0x1000000>;
+		};
+	};
+};
diff --git a/src/arm/armada-398.dtsi b/src/arm/armada-398.dtsi
index fdc25914e3a3..234a99891a29 100644
--- a/src/arm/armada-398.dtsi
+++ b/src/arm/armada-398.dtsi
@@ -44,7 +44,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "armada-39x.dtsi"
+#include "armada-395.dtsi"
 
 / {
 	compatible = "marvell,armada398", "marvell,armada390";
@@ -55,6 +55,14 @@
 				compatible = "marvell,mv88f6928-pinctrl";
 				reg = <0x18000 0x20>;
 			};
+
+			sata@e0000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>;
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/src/arm/armada-39x.dtsi b/src/arm/armada-39x.dtsi
index dc6efd386dbc..de171baffcf6 100644
--- a/src/arm/armada-39x.dtsi
+++ b/src/arm/armada-39x.dtsi
@@ -55,6 +55,8 @@
 	compatible = "marvell,armada390";
 
 	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -78,6 +80,11 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts-extended = <&mpic 3>;
+	};
+
 	soc {
 		compatible = "marvell,armada390-mbus", "marvell,armadaxp-mbus",
 			     "simple-bus";
@@ -131,30 +138,6 @@
 				      <0xc100 0x100>;
 			};
 
-			spi0: spi@10600 {
-				compatible = "marvell,armada-390-spi",
-						"marvell,orion-spi";
-				reg = <0x10600 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,armada-390-spi",
-						"marvell,orion-spi";
-				reg = <0x10680 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
 			i2c0: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x20>;
@@ -269,6 +252,34 @@
 				};
 			};
 
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <28>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			system-controller@18200 {
 				compatible = "marvell,armada-390-system-controller",
 					     "marvell,armada-370-xp-system-controller";
@@ -317,11 +328,29 @@
 				clock-names = "nbclk", "fixed";
 			};
 
+			watchdog@20300 {
+				compatible = "marvell,armada-380-wdt";
+				reg = <0x20300 0x34>, <0x20704 0x4>,
+				      <0x18260 0x4>;
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
 			cpurst@20800 {
 				compatible = "marvell,armada-370-cpu-reset";
 				reg = <0x20800 0x10>;
 			};
 
+			mpcore-soc-ctrl@20d20 {
+				compatible = "marvell,armada-380-mpcore-soc-ctrl";
+				reg = <0x20d20 0x6c>;
+			};
+
+			coherency-fabric@21010 {
+				compatible = "marvell,armada-380-coherency-fabric";
+				reg = <0x21010 0x1c>;
+			};
+
 			pmsu@22000 {
 				compatible = "marvell,armada-390-pmsu",
 					     "marvell,armada-380-pmsu";
@@ -368,6 +397,13 @@
 				};
 			};
 
+			rtc@a3800 {
+				compatible = "marvell,armada-380-rtc";
+				reg = <0xa3800 0x20>, <0x184a0 0x0c>;
+				reg-names = "rtc", "rtc-soc";
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			flash@d0000 {
 				compatible = "marvell,armada370-nand";
 				reg = <0xd0000 0x54>;
@@ -380,7 +416,10 @@
 
 			sdhci@d8000 {
 				compatible = "marvell,armada-380-sdhci";
-				reg = <0xd8000 0x1000>, <0xdc000 0x100>;
+				reg-names = "sdhci", "mbus", "conf-sdio3";
+				reg = <0xd8000 0x1000>,
+					<0xdc000 0x100>,
+					<0x18454 0x4>;
 				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gateclk 17>;
 				mrvl,clk-delay-cycles = <0x1F>;
@@ -395,6 +434,12 @@
 				clocks = <&mainpll>;
 				clock-output-names = "nand";
 			};
+
+			thermal@e8078 {
+				compatible = "marvell,armada380-thermal";
+				reg = <0xe4078 0x4>, <0xe4074 0x4>;
+				status = "okay";
+			};
 		};
 
 		pcie-controller {
@@ -501,14 +546,45 @@
 				status = "disabled";
 			};
 		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,armada-390-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10680 {
+			compatible = "marvell,armada-390-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
 	};
 
 	clocks {
-		/* 2 GHz fixed main PLL */
+		/* 1 GHz fixed main PLL */
 		mainpll: mainpll {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <1000000000>;
 		};
+
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
 	};
 };
diff --git a/src/arm/armada-xp-axpwifiap.dts b/src/arm/armada-xp-axpwifiap.dts
index 5c21b236721f..1e1fc4fccbad 100644
--- a/src/arm/armada-xp-axpwifiap.dts
+++ b/src/arm/armada-xp-axpwifiap.dts
@@ -62,7 +62,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */
 	};
@@ -73,28 +73,6 @@
 			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
 			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
-		pcie-controller {
-			status = "okay";
-
-			/* First mini-PCIe port */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Second mini-PCIe port */
-			pcie@2,0 {
-				/* Port 0, Lane 1 */
-				status = "okay";
-			};
-
-			/* Renesas uPD720202 USB 3.0 controller */
-			pcie@3,0 {
-				/* Port 0, Lane 3 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 			/* UART0 */
 			serial@12000 {
@@ -111,16 +89,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
 			ethernet@70000 {
 				pinctrl-0 = <&ge0_rgmii_pins>;
 				pinctrl-names = "default";
@@ -135,18 +103,6 @@
 				phy = <&phy1>;
 				phy-mode = "rgmii-id";
 			};
-
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
 		};
 	};
 
@@ -157,7 +113,7 @@
 		pinctrl-0 = <&keys_pin>;
 		pinctrl-names = "default";
 
-		button@1 {
+		reset {
 			label = "Factory Reset Button";
 			linux,code = <KEY_SETUP>;
 			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
@@ -165,6 +121,38 @@
 	};
 };
 
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* First mini-PCIe port */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Second mini-PCIe port */
+	pcie@2,0 {
+		/* Port 0, Lane 1 */
+		status = "okay";
+	};
+
+	/* Renesas uPD720202 USB 3.0 controller */
+	pcie@3,0 {
+		/* Port 0, Lane 3 */
+		status = "okay";
+	};
+};
+
 &pinctrl {
 	pinctrl-0 = <&phy_int_pin>;
 	pinctrl-names = "default";
@@ -179,3 +167,15 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
diff --git a/src/arm/armada-xp-db.dts b/src/arm/armada-xp-db.dts
index 62422a90aeb2..44a724d39dbe 100644
--- a/src/arm/armada-xp-db.dts
+++ b/src/arm/armada-xp-db.dts
@@ -67,7 +67,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
 	};
@@ -108,39 +108,6 @@
 			};
 		};
 
-		pcie-controller {
-			status = "okay";
-
-			/*
-			 * All 6 slots are physically present as
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@2,0 {
-				/* Port 0, Lane 1 */
-				status = "okay";
-			};
-			pcie@3,0 {
-				/* Port 0, Lane 2 */
-				status = "okay";
-			};
-			pcie@4,0 {
-				/* Port 0, Lane 3 */
-				status = "okay";
-			};
-			pcie@9,0 {
-				/* Port 2, Lane 0 */
-				status = "okay";
-			};
-			pcie@10,0 {
-				/* Port 3, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 			serial@12000 {
 				status = "okay";
@@ -160,24 +127,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-
-				phy2: ethernet-phy@2 {
-					reg = <25>;
-				};
-
-				phy3: ethernet-phy@3 {
-					reg = <27>;
-				};
-			};
-
 			ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
@@ -231,18 +180,6 @@
 				status = "okay";
 			};
 
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "m25p64", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <20000000>;
-				};
-			};
-
 			nand@d0000 {
 				status = "okay";
 				num-cs = <1>;
@@ -277,3 +214,66 @@
 		};
 	};
 };
+
+&pciec {
+	status = "okay";
+
+	/*
+	 * All 6 slots are physically present as
+	 * standard PCIe slots on the board.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+	pcie@2,0 {
+		/* Port 0, Lane 1 */
+		status = "okay";
+	};
+	pcie@3,0 {
+		/* Port 0, Lane 2 */
+		status = "okay";
+	};
+	pcie@4,0 {
+		/* Port 0, Lane 3 */
+		status = "okay";
+	};
+	pcie@9,0 {
+		/* Port 2, Lane 0 */
+		status = "okay";
+	};
+	pcie@10,0 {
+		/* Port 3, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <25>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <27>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p64", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+	};
+};
diff --git a/src/arm/armada-xp-gp.dts b/src/arm/armada-xp-gp.dts
index 061f4237760e..72cb8fa377e3 100644
--- a/src/arm/armada-xp-gp.dts
+++ b/src/arm/armada-xp-gp.dts
@@ -68,7 +68,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		/*
                  * 8 GB of plug-in RAM modules by default.The amount
@@ -127,27 +127,6 @@
 			};
 		};
 
-		pcie-controller {
-			status = "okay";
-
-			/*
-			 * The 3 slots are physically present as
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@9,0 {
-				/* Port 2, Lane 0 */
-				status = "okay";
-			};
-			pcie@10,0 {
-				/* Port 3, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 			serial@12000 {
 				status = "okay";
@@ -175,24 +154,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <16>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <17>;
-				};
-
-				phy2: ethernet-phy@2 {
-					reg = <18>;
-				};
-
-				phy3: ethernet-phy@3 {
-					reg = <19>;
-				};
-			};
-
 			ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
@@ -232,18 +193,6 @@
 				status = "okay";
 			};
 
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
 			bm@c0000 {
 				status = "okay";
 			};
@@ -262,3 +211,54 @@
 		};
 	};
 };
+
+&pciec {
+	status = "okay";
+
+	/*
+	 * The 3 slots are physically present as
+	 * standard PCIe slots on the board.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+	pcie@9,0 {
+		/* Port 2, Lane 0 */
+		status = "okay";
+	};
+	pcie@10,0 {
+		/* Port 3, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <16>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <17>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <18>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <19>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
diff --git a/src/arm/armada-xp-lenovo-ix4-300d.dts b/src/arm/armada-xp-lenovo-ix4-300d.dts
index 8af463f26ea1..d848ae9007db 100644
--- a/src/arm/armada-xp-lenovo-ix4-300d.dts
+++ b/src/arm/armada-xp-lenovo-ix4-300d.dts
@@ -57,7 +57,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x00000000 0 0x20000000>; /* 512MB */
 	};
@@ -68,37 +68,11 @@
 			MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
 			MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
-		pcie-controller {
-			status = "okay";
-
-			/* Quad port sata: Marvell 88SX7042 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* USB 3.0 xHCI controller: NEC D720200F1 */
-			pcie@5,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 			serial@12000 {
 				status = "okay";
 			};
 
-			mdio {
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-					reg = <1>;
-				};
-			};
-
 			ethernet@70000 {
 				pinctrl-0 = <&ge0_rgmii_pins>;
 				pinctrl-names = "default";
@@ -295,6 +269,31 @@
 		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
 	};
 };
+&pciec {
+	status = "okay";
+
+	/* Quad port sata: Marvell 88SX7042 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* USB 3.0 xHCI controller: NEC D720200F1 */
+	pcie@5,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+		reg = <1>;
+	};
+};
 
 &pinctrl {
 	poweroff_pin: poweroff-pin {
diff --git a/src/arm/armada-xp-linksys-mamba.dts b/src/arm/armada-xp-linksys-mamba.dts
index 7a461541ce50..83ac884c0f8a 100644
--- a/src/arm/armada-xp-linksys-mamba.dts
+++ b/src/arm/armada-xp-linksys-mamba.dts
@@ -62,7 +62,7 @@
 		stdout-path = &uart0;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */
 	};
@@ -73,28 +73,6 @@
 			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
 			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
-		pcie-controller {
-			status = "okay";
-
-			/* Etron EJ168 USB 3.0 controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* First mini-PCIe port */
-			pcie@2,0 {
-				/* Port 0, Lane 1 */
-				status = "okay";
-			};
-
-			/* Second mini-PCIe port */
-			pcie@3,0 {
-				/* Port 0, Lane 3 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 
 			rtc@10300 {
@@ -279,18 +257,6 @@
 					reg = <0x180000 0x780000>;   /* 7.5MB */
 				};
 			};
-
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "everspin,mr25h256";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <40000000>;
-				};
-			};
 		};
 	};
 
@@ -301,13 +267,13 @@
 		pinctrl-0 = <&keys_pin>;
 		pinctrl-names = "default";
 
-		button@1 {
+		wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 		};
 
-		button@2 {
+		reset {
 			label = "Factory Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
@@ -335,7 +301,7 @@
 				      4500 1>;
 	};
 
-	dsa@0 {
+	dsa {
 		compatible = "marvell,dsa";
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -381,6 +347,28 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	/* Etron EJ168 USB 3.0 controller */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* First mini-PCIe port */
+	pcie@2,0 {
+		/* Port 0, Lane 1 */
+		status = "okay";
+	};
+
+	/* Second mini-PCIe port */
+	pcie@3,0 {
+		/* Port 0, Lane 3 */
+		status = "okay";
+	};
+};
+
 &pinctrl {
 
 	keys_pin: keys-pin {
@@ -398,3 +386,15 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "everspin,mr25h256";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <40000000>;
+	};
+};
diff --git a/src/arm/armada-xp-matrix.dts b/src/arm/armada-xp-matrix.dts
index 6522b04f4a8e..16277380e714 100644
--- a/src/arm/armada-xp-matrix.dts
+++ b/src/arm/armada-xp-matrix.dts
@@ -55,7 +55,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		/*
 		 * This board has 4 GB of RAM, but the last 256 MB of
@@ -99,18 +99,18 @@
 				};
 			};
 
-			pcie-controller {
-				status = "okay";
-
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-			};
-
 			usb@50000 {
 				status = "okay";
 			};
 		};
 	};
 };
+
+&pciec {
+	status = "okay";
+
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+};
diff --git a/src/arm/armada-xp-mv78230.dtsi b/src/arm/armada-xp-mv78230.dtsi
index 6e6d0f04bf2b..05c164b5786d 100644
--- a/src/arm/armada-xp-mv78230.dtsi
+++ b/src/arm/armada-xp-mv78230.dtsi
@@ -86,7 +86,7 @@
 		 * configured as x4 or quad x1 lanes. One unit is
 		 * x1 only.
 		 */
-		pcie-controller {
+		pciec: pcie-controller@82000000 {
 			compatible = "marvell,armada-xp-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -114,7 +114,7 @@
 				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
 				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
 
-			pcie@1,0 {
+			pcie1: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
@@ -131,7 +131,7 @@
 				status = "disabled";
 			};
 
-			pcie@2,0 {
+			pcie2: pcie@2,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
@@ -148,7 +148,7 @@
 				status = "disabled";
 			};
 
-			pcie@3,0 {
+			pcie3: pcie@3,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
@@ -165,7 +165,7 @@
 				status = "disabled";
 			};
 
-			pcie@4,0 {
+			pcie4: pcie@4,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
@@ -182,7 +182,7 @@
 				status = "disabled";
 			};
 
-			pcie@5,0 {
+			pcie5: pcie@5,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
diff --git a/src/arm/armada-xp-mv78260.dtsi b/src/arm/armada-xp-mv78260.dtsi
index c5fdc99f0dbe..07894b0d3e59 100644
--- a/src/arm/armada-xp-mv78260.dtsi
+++ b/src/arm/armada-xp-mv78260.dtsi
@@ -87,7 +87,7 @@
 		 * configured as x4 or quad x1 lanes. One unit is
 		 * x4 only.
 		 */
-		pcie-controller {
+		pciec: pcie-controller@82000000 {
 			compatible = "marvell,armada-xp-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -129,7 +129,7 @@
 				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
 				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
 
-			pcie@1,0 {
+			pcie1: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
@@ -146,7 +146,7 @@
 				status = "disabled";
 			};
 
-			pcie@2,0 {
+			pcie2: pcie@2,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
@@ -163,7 +163,7 @@
 				status = "disabled";
 			};
 
-			pcie@3,0 {
+			pcie3: pcie@3,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
@@ -180,7 +180,7 @@
 				status = "disabled";
 			};
 
-			pcie@4,0 {
+			pcie4: pcie@4,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
@@ -197,7 +197,7 @@
 				status = "disabled";
 			};
 
-			pcie@5,0 {
+			pcie5: pcie@5,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
@@ -214,7 +214,7 @@
 				status = "disabled";
 			};
 
-			pcie@6,0 {
+			pcie6: pcie@6,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
 				reg = <0x3000 0 0 0 0>;
@@ -231,7 +231,7 @@
 				status = "disabled";
 			};
 
-			pcie@7,0 {
+			pcie7: pcie@7,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
 				reg = <0x3800 0 0 0 0>;
@@ -248,7 +248,7 @@
 				status = "disabled";
 			};
 
-			pcie@8,0 {
+			pcie8: pcie@8,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
 				reg = <0x4000 0 0 0 0>;
@@ -265,7 +265,7 @@
 				status = "disabled";
 			};
 
-			pcie@9,0 {
+			pcie9: pcie@9,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
 				reg = <0x4800 0 0 0 0>;
diff --git a/src/arm/armada-xp-mv78460.dtsi b/src/arm/armada-xp-mv78460.dtsi
index 0e24f1a38540..775bee53ce86 100644
--- a/src/arm/armada-xp-mv78460.dtsi
+++ b/src/arm/armada-xp-mv78460.dtsi
@@ -104,7 +104,7 @@
 		 * configured as x4 or quad x1 lanes. Two units are
 		 * x4/x1.
 		 */
-		pcie-controller {
+		pciec: pcie-controller@82000000 {
 			compatible = "marvell,armada-xp-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -150,7 +150,7 @@
 				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
 				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
 
-			pcie@1,0 {
+			pcie1: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
@@ -167,7 +167,7 @@
 				status = "disabled";
 			};
 
-			pcie@2,0 {
+			pcie2: pcie@2,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
@@ -184,7 +184,7 @@
 				status = "disabled";
 			};
 
-			pcie@3,0 {
+			pcie3: pcie@3,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
@@ -201,7 +201,7 @@
 				status = "disabled";
 			};
 
-			pcie@4,0 {
+			pcie4: pcie@4,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
@@ -218,7 +218,7 @@
 				status = "disabled";
 			};
 
-			pcie@5,0 {
+			pcie5: pcie@5,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
@@ -235,7 +235,7 @@
 				status = "disabled";
 			};
 
-			pcie@6,0 {
+			pcie6: pcie@6,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
 				reg = <0x3000 0 0 0 0>;
@@ -252,7 +252,7 @@
 				status = "disabled";
 			};
 
-			pcie@7,0 {
+			pcie7: pcie@7,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
 				reg = <0x3800 0 0 0 0>;
@@ -269,7 +269,7 @@
 				status = "disabled";
 			};
 
-			pcie@8,0 {
+			pcie8: pcie@8,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
 				reg = <0x4000 0 0 0 0>;
@@ -286,7 +286,7 @@
 				status = "disabled";
 			};
 
-			pcie@9,0 {
+			pcie9: pcie@9,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
 				reg = <0x4800 0 0 0 0>;
@@ -303,7 +303,7 @@
 				status = "disabled";
 			};
 
-			pcie@10,0 {
+			pcie10: pcie@10,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
 				reg = <0x5000 0 0 0 0>;
diff --git a/src/arm/armada-xp-netgear-rn2120.dts b/src/arm/armada-xp-netgear-rn2120.dts
index d19f44c70925..a2f0e789465d 100644
--- a/src/arm/armada-xp-netgear-rn2120.dts
+++ b/src/arm/armada-xp-netgear-rn2120.dts
@@ -56,7 +56,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x00000000 0 0x80000000>; /* 2GB */
 	};
@@ -67,28 +67,6 @@
 			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
 			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
-		pcie-controller {
-			status = "okay";
-
-			/* Connected to first Marvell 88SE9170 SATA controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Connected to second Marvell 88SE9170 SATA controller */
-			pcie@2,0 {
-				/* Port 0, Lane 1 */
-				status = "okay";
-			};
-
-			/* Connected to Fresco Logic FL1009 USB 3.0 controller */
-			pcie@5,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 
 			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
@@ -97,7 +75,6 @@
 			};
 
 			i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
 				clock-frequency = <400000>;
 				status = "okay";
 
@@ -154,23 +131,19 @@
 				status = "okay";
 			};
 
-			mdio {
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-					reg = <1>;
-				};
-			};
-
 			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "rgmii-id";
 			};
 
 			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "rgmii-id";
@@ -295,6 +268,39 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	/* Connected to first Marvell 88SE9170 SATA controller */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Connected to second Marvell 88SE9170 SATA controller */
+	pcie@2,0 {
+		/* Port 0, Lane 1 */
+		status = "okay";
+	};
+
+	/* Connected to Fresco Logic FL1009 USB 3.0 controller */
+	pcie@5,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+		reg = <1>;
+	};
+};
+
+
 &pinctrl {
 	poweroff: poweroff {
 		marvell,pins = "mpp42";
diff --git a/src/arm/armada-xp-openblocks-ax3-4.dts b/src/arm/armada-xp-openblocks-ax3-4.dts
index ed3b889d16ce..b577c9fb03a4 100644
--- a/src/arm/armada-xp-openblocks-ax3-4.dts
+++ b/src/arm/armada-xp-openblocks-ax3-4.dts
@@ -57,7 +57,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */
 	};
@@ -98,15 +98,6 @@
 			};
 		};
 
-		pcie-controller {
-			status = "okay";
-			/* Internal mini-PCIe connector */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 			rtc@10300 {
 				/* No crystal connected to the internal RTC */
@@ -148,31 +139,13 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				button@1 {
+				init {
 					label = "Init Button";
 					linux,code = <KEY_POWER>;
 					gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-
-				phy2: ethernet-phy@2 {
-					reg = <2>;
-				};
-
-				phy3: ethernet-phy@3 {
-					reg = <3>;
-				};
-			};
-
 			ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
@@ -240,6 +213,33 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+	/* Internal mini-PCIe connector */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <2>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
 &pinctrl {
 	led_pins: led-pins-0 {
 		marvell,pins = "mpp49", "mpp51", "mpp53";
diff --git a/src/arm/armada-xp-synology-ds414.dts b/src/arm/armada-xp-synology-ds414.dts
index d17dab0a6f51..e803da03146a 100644
--- a/src/arm/armada-xp-synology-ds414.dts
+++ b/src/arm/armada-xp-synology-ds414.dts
@@ -70,7 +70,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x00000000 0 0x40000000>; /* 1GB */
 	};
@@ -81,28 +81,6 @@
 			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
 			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
-		pcie-controller {
-			status = "okay";
-
-			/*
-			 * Connected to Marvell 88SX7042 SATA-II controller
-			 * handling the four disks.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/*
-			 * Connected to EtronTech EJ168A XHCI controller
-			 * providing the two rear USB 3.0 ports.
-			 */
-			pcie@5,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 
 			/* RTC is provided by Seiko S-35390A below */
@@ -110,62 +88,6 @@
 				status = "disabled";
 			};
 
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "micron,n25q064", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <20000000>;
-
-					/*
-					 * Warning!
-					 *
-					 * Synology u-boot uses its compiled-in environment
-					 * and it seems Synology did not care to change u-boot
-					 * default configuration in order to allow saving a
-					 * modified environment at a sensible location. So,
-					 * if you do a 'saveenv' under u-boot, your modified
-					 * environment will be saved at 1MB after the start
-					 * of the flash, i.e. in the middle of the uImage.
-					 * For that reason, it is strongly advised not to
-					 * change the default environment, unless you know
-					 * what you are doing.
-					 */
-					partition@00000000 { /* u-boot */
-						label = "RedBoot";
-						reg = <0x00000000 0x000d0000>; /* 832KB */
-					};
-
-					partition@000c0000 { /* uImage */
-						label = "zImage";
-						reg = <0x000d0000 0x002d0000>; /* 2880KB */
-					};
-
-					partition@003a0000 { /* uInitramfs */
-						label = "rd.gz";
-						reg = <0x003a0000 0x00430000>; /* 4250KB */
-					};
-
-					partition@007d0000 { /* MAC address and serial number */
-						label = "vendor";
-						reg = <0x007d0000 0x00010000>; /* 64KB */
-					};
-
-					partition@007e0000 {
-						label = "RedBoot config";
-						reg = <0x007e0000 0x00010000>; /* 64KB */
-					};
-
-					partition@007f0000 {
-						label = "FIS directory";
-						reg = <0x007f0000 0x00010000>; /* 64KB */
-					};
-				};
-			};
-
 			i2c@11000 {
 				clock-frequency = <400000>;
 				status = "okay";
@@ -206,16 +128,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				phy0: ethernet-phy@0 { /* Marvell 88E1512 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1512 */
-					reg = <1>;
-				};
-			};
-
 			ethernet@70000 {
 				status = "okay";
 				pinctrl-0 = <&ge0_rgmii_pins>;
@@ -242,7 +154,7 @@
 			     &sata3_pwr_pin &sata4_pwr_pin>;
 		pinctrl-names = "default";
 
-		sata1_regulator: sata1-regulator {
+		sata1_regulator: sata1-regulator@1 {
 			compatible = "regulator-fixed";
 			reg = <1>;
 			regulator-name = "SATA1 Power";
@@ -255,7 +167,7 @@
 			gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		sata2_regulator: sata2-regulator {
+		sata2_regulator: sata2-regulator@2 {
 			compatible = "regulator-fixed";
 			reg = <2>;
 			regulator-name = "SATA2 Power";
@@ -268,7 +180,7 @@
 			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		sata3_regulator: sata3-regulator {
+		sata3_regulator: sata3-regulator@3 {
 			compatible = "regulator-fixed";
 			reg = <3>;
 			regulator-name = "SATA3 Power";
@@ -281,7 +193,7 @@
 			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		};
 
-		sata4_regulator: sata4-regulator {
+		sata4_regulator: sata4-regulator@4 {
 			compatible = "regulator-fixed";
 			reg = <4>;
 			regulator-name = "SATA4 Power";
@@ -296,6 +208,39 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	/*
+	 * Connected to Marvell 88SX7042 SATA-II controller
+	 * handling the four disks.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/*
+	 * Connected to EtronTech EJ168A XHCI controller
+	 * providing the two rear USB 3.0 ports.
+	 */
+	pcie@5,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+
+&mdio {
+	phy0: ethernet-phy@0 { /* Marvell 88E1512 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+		reg = <1>;
+	};
+};
+
 &pinctrl {
 	sata1_pwr_pin: sata1-pwr-pin {
 		marvell,pins = "mpp42";
@@ -362,3 +307,59 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+
+		/*
+		 * Warning!
+		 *
+		 * Synology u-boot uses its compiled-in environment
+		 * and it seems Synology did not care to change u-boot
+		 * default configuration in order to allow saving a
+		 * modified environment at a sensible location. So,
+		 * if you do a 'saveenv' under u-boot, your modified
+		 * environment will be saved at 1MB after the start
+		 * of the flash, i.e. in the middle of the uImage.
+		 * For that reason, it is strongly advised not to
+		 * change the default environment, unless you know
+		 * what you are doing.
+		 */
+		partition@00000000 { /* u-boot */
+			label = "RedBoot";
+			reg = <0x00000000 0x000d0000>; /* 832KB */
+		};
+
+		partition@000c0000 { /* uImage */
+			label = "zImage";
+			reg = <0x000d0000 0x002d0000>; /* 2880KB */
+		};
+
+		partition@003a0000 { /* uInitramfs */
+			label = "rd.gz";
+			reg = <0x003a0000 0x00430000>; /* 4250KB */
+		};
+
+		partition@007d0000 { /* MAC address and serial number */
+			label = "vendor";
+			reg = <0x007d0000 0x00010000>; /* 64KB */
+		};
+
+		partition@007e0000 {
+			label = "RedBoot config";
+			reg = <0x007e0000 0x00010000>; /* 64KB */
+		};
+
+		partition@007f0000 {
+			label = "FIS directory";
+			reg = <0x007f0000 0x00010000>; /* 64KB */
+		};
+	};
+};
diff --git a/src/arm/armada-xp.dtsi b/src/arm/armada-xp.dtsi
index 553349c07f28..5274e4ff5d62 100644
--- a/src/arm/armada-xp.dtsi
+++ b/src/arm/armada-xp.dtsi
@@ -53,6 +53,9 @@
 #include "armada-370-xp.dtsi"
 
 / {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
 	model = "Marvell Armada XP family SoC";
 	compatible = "marvell,armadaxp", "marvell,armada-370-xp";
 
@@ -75,7 +78,7 @@
 				reg = <0x1400 0x500>;
 			};
 
-			L2: l2-cache {
+			L2: l2-cache@8000 {
 				compatible = "marvell,aurora-system-cache";
 				reg = <0x08000 0x1000>;
 				cache-id-part = <0x100>;
@@ -84,29 +87,6 @@
 				wt-override;
 			};
 
-			spi0: spi@10600 {
-				compatible = "marvell,armada-xp-spi",
-						"marvell,orion-spi";
-				pinctrl-0 = <&spi0_pins>;
-				pinctrl-names = "default";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,armada-xp-spi",
-						"marvell,orion-spi";
-			};
-
-
-			i2c0: i2c@11000 {
-				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x100>;
-			};
-
-			i2c1: i2c@11100 {
-				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-				reg = <0x11100 0x100>;
-			};
-
 			uart2: serial@12200 {
 				compatible = "snps,dw-apb-uart";
 				pinctrl-0 = <&uart2_pins>;
@@ -131,7 +111,7 @@
 				status = "disabled";
 			};
 
-			system-controller@18200 {
+			systemc: system-controller@18200 {
 				compatible = "marvell,armada-370-xp-system-controller";
 				reg = <0x18200 0x500>;
 			};
@@ -149,7 +129,7 @@
 				#clock-cells = <1>;
 			};
 
-			thermal@182b0 {
+			thermal: thermal@182b0 {
 				compatible = "marvell,armadaxp-thermal";
 				reg = <0x182b0 0x4
 					0x184d0 0x4>;
@@ -163,27 +143,6 @@
 				clocks = <&coreclk 1>;
 			};
 
-			interrupt-controller@20a00 {
-			      reg = <0x20a00 0x2d0>, <0x21070 0x58>;
-			};
-
-			timer@20300 {
-				compatible = "marvell,armada-xp-timer";
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			watchdog@20300 {
-				compatible = "marvell,armada-xp-wdt";
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			cpurst@20800 {
-				compatible = "marvell,armada-370-cpu-reset";
-				reg = <0x20800 0x20>;
-			};
-
 			cpu-config@21000 {
 				compatible = "marvell,armada-xp-cpu-config";
 				reg = <0x21000 0x8>;
@@ -197,15 +156,7 @@
 				status = "disabled";
 			};
 
-			usb@50000 {
-				clocks = <&gateclk 18>;
-			};
-
-			usb@51000 {
-				clocks = <&gateclk 19>;
-			};
-
-			usb@52000 {
+			usb2: usb@52000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x52000 0x500>;
 				interrupts = <47>;
@@ -213,7 +164,7 @@
 				status = "disabled";
 			};
 
-			xor@60900 {
+			xor1: xor@60900 {
 				compatible = "marvell,orion-xor";
 				reg = <0x60900 0x100
 				       0x60b00 0x100>;
@@ -241,7 +192,7 @@
 				compatible = "marvell,armada-xp-neta";
 			};
 
-			crypto@90000 {
+			cesa: crypto@90000 {
 				compatible = "marvell,armada-xp-crypto";
 				reg = <0x90000 0x10000>;
 				reg-names = "regs";
@@ -261,7 +212,7 @@
 				status = "disabled";
 			};
 
-			xor@f0900 {
+			xor0: xor@f0900 {
 				compatible = "marvell,orion-xor";
 				reg = <0xF0900 0x100
 				       0xF0B00 0x100>;
@@ -322,6 +273,44 @@
 	};
 };
 
+&i2c0 {
+	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+	reg = <0x11000 0x100>;
+};
+
+&i2c1 {
+	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+	reg = <0x11100 0x100>;
+};
+
+&mpic {
+	reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+};
+
+&timer {
+	compatible = "marvell,armada-xp-timer";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+};
+
+&watchdog {
+	compatible = "marvell,armada-xp-wdt";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+};
+
+&cpurst {
+	reg = <0x20800 0x20>;
+};
+
+&usb0 {
+	clocks = <&gateclk 18>;
+};
+
+&usb1 {
+	clocks = <&gateclk 19>;
+};
+
 &pinctrl {
 	ge0_gmii_pins: ge0-gmii-pins {
 		marvell,pins =
@@ -362,6 +351,12 @@
 		marvell,function = "spi0";
 	};
 
+	spi1_pins: spi1-pins {
+		marvell,pins = "mpp13", "mpp14",
+			       "mpp16", "mpp17";
+		marvell,function = "spi1";
+	};
+
 	uart2_pins: uart2-pins {
 		marvell,pins = "mpp42", "mpp43";
 		marvell,function = "uart2";
@@ -372,3 +367,15 @@
 		marvell,function = "uart3";
 	};
 };
+
+&spi0 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+};
+
+&spi1 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+};
diff --git a/src/arm/armv7-m.dtsi b/src/arm/armv7-m.dtsi
index 16331aa79775..ba332e399be4 100644
--- a/src/arm/armv7-m.dtsi
+++ b/src/arm/armv7-m.dtsi
@@ -1,5 +1,3 @@
-#include "skeleton.dtsi"
-
 / {
 	nvic: interrupt-controller@e000e100  {
 		compatible = "arm,armv7m-nvic";
diff --git a/src/arm/artpec6-devboard.dts b/src/arm/artpec6-devboard.dts
index f823ed382ac7..9dfe845694cf 100644
--- a/src/arm/artpec6-devboard.dts
+++ b/src/arm/artpec6-devboard.dts
@@ -46,6 +46,10 @@
 	status = "okay";
 };
 
+&pcie {
+	status = "okay";
+};
+
 &ethernet {
 	status = "okay";
 
diff --git a/src/arm/artpec6.dtsi b/src/arm/artpec6.dtsi
index 3fac4c4d0007..767cbe8d8557 100644
--- a/src/arm/artpec6.dtsi
+++ b/src/arm/artpec6.dtsi
@@ -41,6 +41,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axis,artpec6-clkctrl.h>
 #include "skeleton.dtsi"
 
 / {
@@ -66,7 +67,7 @@
 		};
 	};
 
-	syscon {
+	syscon: syscon@f8000000 {
 		compatible = "axis,artpec6-syscon", "syscon";
 		reg = <0xf8000000 0x48>;
 	};
@@ -109,14 +110,14 @@
 		compatible = "arm,cortex-a9-global-timer";
 		reg = <0xfaf00200 0x20>;
 		interrupts = <GIC_PPI 11 0xf01>;
-		clocks = <&clkctrl 1>;
+		clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>;
 	};
 
 	timer@faf00600 {
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0xfaf00600 0x20>;
 		interrupts = <GIC_PPI 13 0xf04>;
-		clocks = <&clkctrl 1>;
+		clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>;
 		status = "disabled";
 	};
 
@@ -136,15 +137,50 @@
 		arm,data-latency = <1 1 1>;
 		arm,tag-latency = <1 1 1>;
 		arm,filter-ranges = <0x0 0x80000000>;
+		arm,double-linefill = <1>;
+		arm,double-linefill-incr = <0>;
+		arm,double-linefill-wrap = <0>;
+		prefetch-data = <1>;
+		prefetch-instr = <1>;
+		arm,prefetch-offset = <0>;
+		arm,prefetch-drop = <1>;
 	};
 
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 			<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
 		interrupt-parent = <&intc>;
 	};
 
+	pcie: pcie@f8050000 {
+		compatible = "axis,artpec6-pcie", "snps,dw-pcie";
+		reg = <0xf8050000 0x2000
+		       0xf8040000 0x1000
+		       0xc0000000 0x2000>;
+		reg-names = "dbi", "phy", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+			  /* downstream I/O */
+		ranges = <0x81000000 0 0 0xc0002000 0 0x00010000
+			  /* non-prefetchable memory */
+			  0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>;
+		num-lanes = <2>;
+		bus-range = <0x00 0xff>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		axis,syscon-pcie = <&syscon>;
+		status = "disabled";
+	};
+
 	amba@0 {
 		compatible = "simple-bus";
 		#address-cells = <0x1>;
@@ -157,7 +193,7 @@
 		ethernet: ethernet@f8010000 {
 			clock-names = "phy_ref_clk", "apb_pclk";
 			clocks = <&eth_phy_ref_clk>,
-				<&clkctrl 4>;
+				<&clkctrl ARTPEC6_CLK_ETH_ACLK>;
 			compatible = "snps,dwc-qos-ethernet-4.10";
 			interrupt-parent = <&intc>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -175,8 +211,8 @@
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xf8036000 0x1000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clkctrl 13>,
-				<&clkctrl 12>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
 			clock-names = "uart_clk", "apb_pclk";
 			status = "disabled";
 		};
@@ -184,8 +220,8 @@
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xf8037000 0x1000>;
 			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clkctrl 13>,
-				<&clkctrl 12>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
 			clock-names = "uart_clk", "apb_pclk";
 			status = "disabled";
 		};
@@ -193,8 +229,8 @@
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xf8038000 0x1000>;
 			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clkctrl 13>,
-				<&clkctrl 12>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
 			clock-names = "uart_clk", "apb_pclk";
 			status = "disabled";
 		};
@@ -202,8 +238,8 @@
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xf8039000 0x1000>;
 			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clkctrl 13>,
-				<&clkctrl 12>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
 			clock-names = "uart_clk", "apb_pclk";
 			status = "disabled";
 		};
diff --git a/src/arm/at91-ariag25.dts b/src/arm/at91-ariag25.dts
index e9ced30159a7..4da011a7a698 100644
--- a/src/arm/at91-ariag25.dts
+++ b/src/arm/at91-ariag25.dts
@@ -34,15 +34,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -178,7 +169,7 @@
 
 	};
 
-	onewire@0 {
+	onewire {
 		compatible = "w1-gpio";
 		gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
diff --git a/src/arm/at91-cosino.dtsi b/src/arm/at91-cosino.dtsi
index b6ea3f4a7206..02d8ef43de3a 100644
--- a/src/arm/at91-cosino.dtsi
+++ b/src/arm/at91-cosino.dtsi
@@ -26,15 +26,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
diff --git a/src/arm/at91-foxg20.dts b/src/arm/at91-foxg20.dts
index 6bf873e7d96c..50d5e719b451 100644
--- a/src/arm/at91-foxg20.dts
+++ b/src/arm/at91-foxg20.dts
@@ -23,15 +23,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -128,13 +119,13 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c0>;
 		i2c-gpio,delay-us = <5>;	/* ~85 kHz */
diff --git a/src/arm/at91-kizbox.dts b/src/arm/at91-kizbox.dts
index 229e989eb60d..b4f147c193fd 100644
--- a/src/arm/at91-kizbox.dts
+++ b/src/arm/at91-kizbox.dts
@@ -54,7 +54,7 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <1>;
 			status = "okay";
 		};
@@ -96,7 +96,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 
 		rtc: pcf8563@51 {
diff --git a/src/arm/at91-qil_a9260.dts b/src/arm/at91-qil_a9260.dts
index 4f2eebf4a560..8f019184fccf 100644
--- a/src/arm/at91-qil_a9260.dts
+++ b/src/arm/at91-qil_a9260.dts
@@ -20,15 +20,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -111,7 +102,7 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
@@ -187,7 +178,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 };
diff --git a/src/arm/at91-sam9_l9260.dts b/src/arm/at91-sam9_l9260.dts
new file mode 100644
index 000000000000..171243ca4f2f
--- /dev/null
+++ b/src/arm/at91-sam9_l9260.dts
@@ -0,0 +1,121 @@
+/*
+ * at91-sam9_l9260.dts - Device Tree file for Olimex SAM9-L9260 board
+ *
+ *  Copyright (C) 2016 Raashid Muhammed <raashidmuhammed@zilogic.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Olimex sam9-l9260";
+	compatible = "olimex,sam9-l9260", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				status = "okay";
+
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>;
+					wp-gpios = <&pioC 4 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			macb0: ethernet@fffc4000 {
+				pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii_alt>;
+				phy-mode = "mii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <&pioC 11 0>, <0>, <0>, <0>;
+				status = "okay";
+
+				flash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <15000000>;
+					reg = <0>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH	/* CD pin */
+							 AT91_PIOC 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* WP pin */
+					};
+				};
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt = <1>;
+			status = "okay";
+		};
+
+		usb0: ohci@500000 {
+			status = "okay";
+		};
+
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "sam9-l9260:yellow:pwr";
+			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+		};
+
+		status_led {
+			label = "sam9-l9260:green:status";
+			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+};
diff --git a/src/arm/at91-sama5d2_xplained.dts b/src/arm/at91-sama5d2_xplained.dts
index eb4f1ac96271..0b9a59d5fdac 100644
--- a/src/arm/at91-sama5d2_xplained.dts
+++ b/src/arm/at91-sama5d2_xplained.dts
@@ -158,56 +158,64 @@
 				i2c-sda-hold-time-ns = <350>;
 				status = "okay";
 
-				pmic: act8865@5b {
-					compatible = "active-semi,act8865";
+				pmic@5b {
+					compatible = "active-semi,act8945a";
 					reg = <0x5b>;
 					active-semi,vsel-high;
+					active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
+					active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
+					active-semi,irq_gpios = <&pioA 45 GPIO_ACTIVE_LOW>;
+					active-semi,input-voltage-threshold-microvolt = <6600>;
+					active-semi,precondition-timeout = <40>;
+					active-semi,total-timeout = <3>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
 					status = "okay";
 
 					regulators {
-						vdd_1v35_reg: DCDC_REG1 {
+						vdd_1v35_reg: REG_DCDC1 {
 							regulator-name = "VDD_1V35";
 							regulator-min-microvolt = <1350000>;
 							regulator-max-microvolt = <1350000>;
 							regulator-always-on;
 						};
 
-						vdd_1v2_reg: DCDC_REG2 {
+						vdd_1v2_reg: REG_DCDC2 {
 							regulator-name = "VDD_1V2";
 							regulator-min-microvolt = <1100000>;
 							regulator-max-microvolt = <1300000>;
 							regulator-always-on;
 						};
 
-						vdd_3v3_reg: DCDC_REG3 {
+						vdd_3v3_reg: REG_DCDC3 {
 							regulator-name = "VDD_3V3";
 							regulator-min-microvolt = <3300000>;
 							regulator-max-microvolt = <3300000>;
 							regulator-always-on;
 						};
 
-						vdd_fuse_reg: LDO_REG1 {
+						vdd_fuse_reg: REG_LDO1 {
 							regulator-name = "VDD_FUSE";
 							regulator-min-microvolt = <2500000>;
 							regulator-max-microvolt = <2500000>;
 							regulator-always-on;
 						};
 
-						vdd_3v3_lp_reg: LDO_REG2 {
+						vdd_3v3_lp_reg: REG_LDO2 {
 							regulator-name = "VDD_3V3_LP";
 							regulator-min-microvolt = <3300000>;
 							regulator-max-microvolt = <3300000>;
 							regulator-always-on;
 						};
 
-						vdd_led_reg: LDO_REG3 {
+						vdd_led_reg: REG_LDO3 {
 							regulator-name = "VDD_LED";
 							regulator-min-microvolt = <3300000>;
 							regulator-max-microvolt = <3300000>;
 							regulator-always-on;
 						};
 
-						vdd_sdhc_1v8_reg: LDO_REG4 {
+						vdd_sdhc_1v8_reg: REG_LDO4 {
 							regulator-name = "VDD_SDHC_1V8";
 							regulator-min-microvolt = <1800000>;
 							regulator-max-microvolt = <1800000>;
@@ -309,6 +317,21 @@
 					bias-disable;
 				};
 
+				pinctrl_charger_chglev: charger_chglev {
+					pinmux = <PIN_PA12__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_charger_irq: charger_irq {
+					pinmux = <PIN_PB13__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_charger_lbo: charger_lbo {
+					pinmux = <PIN_PC8__GPIO>;
+					bias-pull-up;
+				};
+
 				pinctrl_flx0_default: flx0_default {
 					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
 						 <PIN_PB29__FLEXCOM0_IO1>;
diff --git a/src/arm/at91-sama5d3_xplained.dts b/src/arm/at91-sama5d3_xplained.dts
index f3e2b96c06a3..c51fc652f6c7 100644
--- a/src/arm/at91-sama5d3_xplained.dts
+++ b/src/arm/at91-sama5d3_xplained.dts
@@ -297,7 +297,7 @@
 		};
 	};
 
-	vcc_mmc0_reg: fixedregulator@0 {
+	vcc_mmc0_reg: fixedregulator_mmc0 {
 		compatible = "regulator-fixed";
 		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
 		regulator-name = "mmc0-card-supply";
diff --git a/src/arm/at91-sama5d4_ma5d4.dtsi b/src/arm/at91-sama5d4_ma5d4.dtsi
index e7b2109fc85a..b5a5a91bc2ef 100644
--- a/src/arm/at91-sama5d4_ma5d4.dtsi
+++ b/src/arm/at91-sama5d4_ma5d4.dtsi
@@ -12,16 +12,19 @@
 #include "sama5d4.dtsi"
 
 / {
-	model = "DENX MA5D4";
-	compatible = "denx,ma5d4", "atmel,sama5d4", "atmel,sama5";
+	model = "Aries/DENX MA5D4";
+	compatible = "aries,ma5d4", "denx,ma5d4", "atmel,sama5d4", "atmel,sama5";
 
 	memory {
 		reg = <0x20000000 0x10000000>;
 	};
 
 	clocks {
-		main_clock: main_clock {
-			compatible = "atmel,osc", "fixed-clock";
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
 			clock-frequency = <12000000>;
 		};
 
@@ -106,7 +109,7 @@
 		};
 	};
 
-	vcc_3v3_reg: fixedregulator@0 {
+	vcc_3v3_reg: fixedregulator_3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC 3V3";
 		regulator-min-microvolt = <3300000>;
@@ -115,7 +118,7 @@
 		regulator-always-on;
 	};
 
-	vcc_mmc0_reg: fixedregulator@1 {
+	vcc_mmc0_reg: fixedregulator_mmc0 {
 		compatible = "regulator-fixed";
 		gpio = <&pioE 15 GPIO_ACTIVE_HIGH>;
 		regulator-name = "RST_n MCI0";
diff --git a/src/arm/at91-sama5d4_ma5d4evk.dts b/src/arm/at91-sama5d4_ma5d4evk.dts
index abaaba58fbec..84be29f38dae 100644
--- a/src/arm/at91-sama5d4_ma5d4evk.dts
+++ b/src/arm/at91-sama5d4_ma5d4evk.dts
@@ -13,8 +13,8 @@
 #include "at91-sama5d4_ma5d4.dtsi"
 
 / {
-	model = "DENX MA5D4EVK";
-	compatible = "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";
+	model = "Aries/DENX MA5D4EVK";
+	compatible = "aries,ma5d4evk", "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";
 
 	chosen {
 		stdout-path = "serial3:115200n8";
@@ -159,7 +159,7 @@
 		};
 	};
 
-	vcc_mmc1_reg: fixedregulator@2 {
+	vcc_mmc1_reg: fixedregulator_mmc1 {
 		compatible = "regulator-fixed";
 		gpio = <&pioE 17 GPIO_ACTIVE_LOW>;
 		regulator-name = "VDD MCI1";
diff --git a/src/arm/at91-sama5d4_xplained.dts b/src/arm/at91-sama5d4_xplained.dts
index da84e65b56ef..ed7fce297738 100644
--- a/src/arm/at91-sama5d4_xplained.dts
+++ b/src/arm/at91-sama5d4_xplained.dts
@@ -252,7 +252,7 @@
 		};
 	};
 
-	vcc_3v3_reg: fixedregulator@0 {
+	vcc_3v3_reg: fixedregulator_3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC 3V3";
 		regulator-min-microvolt = <3300000>;
@@ -261,7 +261,7 @@
 		regulator-always-on;
 	};
 
-	vcc_mmc1_reg: fixedregulator@1 {
+	vcc_mmc1_reg: fixedregulator_mmc1 {
 		compatible = "regulator-fixed";
 		gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
 		regulator-name = "VDD MCI1";
diff --git a/src/arm/at91-sama5d4ek.dts b/src/arm/at91-sama5d4ek.dts
index 4e98cda97403..f8b96cef5e1a 100644
--- a/src/arm/at91-sama5d4ek.dts
+++ b/src/arm/at91-sama5d4ek.dts
@@ -69,26 +69,6 @@
 
 	ahb {
 		apb {
-			lcd_bus@f0000000 {
-				status = "okay";
-
-				lcd@f0000000 {
-					status = "okay";
-				};
-
-				lcdovl1@f0000140 {
-					status = "okay";
-				};
-
-				lcdovl2@f0000240 {
-					status = "okay";
-				};
-
-				lcdheo1@f0000340 {
-					status = "okay";
-				};
-			};
-
 			adc0: adc@fc034000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <
diff --git a/src/arm/at91-vinco.dts b/src/arm/at91-vinco.dts
index 6a366ee952a8..e0c0b2897a49 100644
--- a/src/arm/at91-vinco.dts
+++ b/src/arm/at91-vinco.dts
@@ -245,7 +245,7 @@
 
 	};
 
-	vcc_3v3_reg: fixedregulator@0 {
+	vcc_3v3_reg: fixedregulator_3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC 3V3";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm/at91rm9200.dtsi b/src/arm/at91rm9200.dtsi
index f6cb7a80a2f5..f057e0b15a6f 100644
--- a/src/arm/at91rm9200.dtsi
+++ b/src/arm/at91rm9200.dtsi
@@ -481,8 +481,8 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA30 periph A */
-							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA31 periph with pullup */
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
@@ -948,7 +948,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */
 			 &pioA 26 GPIO_ACTIVE_HIGH /* scl */
diff --git a/src/arm/at91sam9260.dtsi b/src/arm/at91sam9260.dtsi
index d4884dd1c243..9e035b21e1b6 100644
--- a/src/arm/at91sam9260.dtsi
+++ b/src/arm/at91sam9260.dtsi
@@ -412,8 +412,8 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A */
-							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB15 periph with pullup */
+							<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
@@ -938,25 +938,21 @@
 				atmel,adc-res-names = "lowres", "highres";
 				atmel,adc-use-res = "highres";
 
-				trigger@0 {
-					reg = <0>;
+				trigger0 {
 					trigger-name = "timer-counter-0";
 					trigger-value = <0x1>;
 				};
-				trigger@1 {
-					reg = <1>;
+				trigger1 {
 					trigger-name = "timer-counter-1";
 					trigger-value = <0x3>;
 				};
 
-				trigger@2 {
-					reg = <2>;
+				trigger2 {
 					trigger-name = "timer-counter-2";
 					trigger-value = <0x5>;
 				};
 
-				trigger@3 {
-					reg = <3>;
+				trigger3 {
 					trigger-name = "external";
 					trigger-value = <0xd>;
 					trigger-external;
@@ -1007,7 +1003,7 @@
 			status = "disabled";
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x100000>;
 			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -1017,7 +1013,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
 			 &pioA 24 GPIO_ACTIVE_HIGH /* scl */
diff --git a/src/arm/at91sam9260ek.dts b/src/arm/at91sam9260ek.dts
new file mode 100644
index 000000000000..b2578feceb08
--- /dev/null
+++ b/src/arm/at91sam9260ek.dts
@@ -0,0 +1,211 @@
+/*
+ * Device Tree file for Atmel at91sam9260 Evaluation Kit
+ *
+ *  Copyright (C) 2016 Atmel,
+ *		  2016 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Atmel at91sam9260ek";
+	compatible = "atmel,at91sam9260ek", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		stdout-path = &dbgu;
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0_slot1
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				status = "okay";
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_usart0
+					 &pinctrl_usart0_rts
+					 &pinctrl_usart0_cts
+					 &pinctrl_usart0_dtr_dsr
+					 &pinctrl_usart0_dcd
+					 &pinctrl_usart0_ri>;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@fffbc000 {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_ssc0_tx>;
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
+				mtd_dataflash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <50000000>;
+					reg = <1>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				board {
+					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+
+			shdwc@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd50 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		btn3 {
+			label = "Button 3";
+			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			wakeup-source;
+		};
+
+		btn4 {
+			label = "Button 4";
+			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+
+		24c512@50 {
+			compatible = "24c512";
+			reg = <0x50>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds5 {
+			label = "ds5";
+			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/src/arm/at91sam9261.dtsi b/src/arm/at91sam9261.dtsi
index 5e09de4eb9cd..3fe77c38bd0d 100644
--- a/src/arm/at91sam9261.dtsi
+++ b/src/arm/at91sam9261.dtsi
@@ -302,8 +302,8 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOA 9  AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+							<AT91_PIOA 9  AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
@@ -860,7 +860,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c_bitbang>;
diff --git a/src/arm/at91sam9263.dtsi b/src/arm/at91sam9263.dtsi
index 93446420af25..a1888f6d892b 100644
--- a/src/arm/at91sam9263.dtsi
+++ b/src/arm/at91sam9263.dtsi
@@ -412,8 +412,8 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC30 periph A */
-							 AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC31 periph with pullup */
+							<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
@@ -1019,7 +1019,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
 			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
diff --git a/src/arm/at91sam9263ek.dts b/src/arm/at91sam9263ek.dts
index 59df9d73d276..127cc42e9e29 100644
--- a/src/arm/at91sam9263ek.dts
+++ b/src/arm/at91sam9263ek.dts
@@ -215,7 +215,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 
 		24c512@50 {
diff --git a/src/arm/at91sam9g20ek_common.dtsi b/src/arm/at91sam9g20ek_common.dtsi
index e9cc99b6353a..27847a47c108 100644
--- a/src/arm/at91sam9g20ek_common.dtsi
+++ b/src/arm/at91sam9g20ek_common.dtsi
@@ -170,13 +170,13 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 
 		24c512@50 {
diff --git a/src/arm/at91sam9g25ek.dts b/src/arm/at91sam9g25ek.dts
index 707fd4ea58f5..91a71774472e 100644
--- a/src/arm/at91sam9g25ek.dts
+++ b/src/arm/at91sam9g25ek.dts
@@ -26,7 +26,24 @@
 
 			i2c0: i2c@f8010000 {
 				ov2640: camera@0x30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
+					clocks = <&pck0>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pck0>;
+					assigned-clock-rates = <25000000>;
 					status = "okay";
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
 				};
 			};
 
@@ -37,6 +54,15 @@
 
 			isi: isi@f8048000 {
 				status = "okay";
+				port {
+					isi_0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
+					};
+				};
 			};
 		};
 	};
diff --git a/src/arm/at91sam9g45.dtsi b/src/arm/at91sam9g45.dtsi
index 8837b7e4292c..e567d5fd3f9d 100644
--- a/src/arm/at91sam9g45.dtsi
+++ b/src/arm/at91sam9g45.dtsi
@@ -478,8 +478,8 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A */
-							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB13 periph A */
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
@@ -1044,28 +1044,24 @@
 				atmel,adc-res-names = "lowres", "highres";
 				atmel,adc-use-res = "highres";
 
-				trigger@0 {
-					reg = <0>;
+				trigger0 {
 					trigger-name = "external-rising";
 					trigger-value = <0x1>;
 					trigger-external;
 				};
-				trigger@1 {
-					reg = <1>;
+				trigger1 {
 					trigger-name = "external-falling";
 					trigger-value = <0x2>;
 					trigger-external;
 				};
 
-				trigger@2 {
-					reg = <2>;
+				trigger2 {
 					trigger-name = "external-any";
 					trigger-value = <0x3>;
 					trigger-external;
 				};
 
-				trigger@3 {
-					reg = <3>;
+				trigger3 {
 					trigger-name = "continuous";
 					trigger-value = <0x6>;
 				};
@@ -1169,13 +1165,13 @@
 				clock-names = "pclk", "hclk";
 				status = "disabled";
 
-				ep0 {
+				ep@0 {
 					reg = <0>;
 					atmel,fifo-size = <64>;
 					atmel,nb-banks = <1>;
 				};
 
-				ep1 {
+				ep@1 {
 					reg = <1>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <2>;
@@ -1183,7 +1179,7 @@
 					atmel,can-isoc;
 				};
 
-				ep2 {
+				ep@2 {
 					reg = <2>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <2>;
@@ -1191,21 +1187,21 @@
 					atmel,can-isoc;
 				};
 
-				ep3 {
+				ep@3 {
 					reg = <3>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
 					atmel,can-dma;
 				};
 
-				ep4 {
+				ep@4 {
 					reg = <4>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
 					atmel,can-dma;
 				};
 
-				ep5 {
+				ep@5 {
 					reg = <5>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
@@ -1213,7 +1209,7 @@
 					atmel,can-isoc;
 				};
 
-				ep6 {
+				ep@6 {
 					reg = <6>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
@@ -1320,7 +1316,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */
 			 &pioA 21 GPIO_ACTIVE_HIGH /* scl */
diff --git a/src/arm/at91sam9n12.dtsi b/src/arm/at91sam9n12.dtsi
index 95569a87b6c9..f43d7695352d 100644
--- a/src/arm/at91sam9n12.dtsi
+++ b/src/arm/at91sam9n12.dtsi
@@ -500,8 +500,8 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA9 periph A */
-							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA10 periph with pullup */
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
@@ -1030,7 +1030,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
 			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
diff --git a/src/arm/at91sam9rl.dtsi b/src/arm/at91sam9rl.dtsi
index 6d829db4e887..f4c129a98f17 100644
--- a/src/arm/at91sam9rl.dtsi
+++ b/src/arm/at91sam9rl.dtsi
@@ -265,25 +265,21 @@
 				atmel,adc-res-names = "lowres", "highres";
 				atmel,adc-use-res = "highres";
 
-				trigger@0 {
-					reg = <0>;
+				trigger0 {
 					trigger-name = "timer-counter-0";
 					trigger-value = <0x1>;
 				};
-				trigger@1 {
-					reg = <1>;
+				trigger1 {
 					trigger-name = "timer-counter-1";
 					trigger-value = <0x3>;
 				};
 
-				trigger@2 {
-					reg = <2>;
+				trigger2 {
 					trigger-name = "timer-counter-2";
 					trigger-value = <0x5>;
 				};
 
-				trigger@3 {
-					reg = <3>;
+				trigger3 {
 					trigger-name = "external";
 					trigger-value = <0x13>;
 					trigger-external;
@@ -301,13 +297,13 @@
 				clock-names = "pclk", "hclk";
 				status = "disabled";
 
-				ep0 {
+				ep@0 {
 					reg = <0>;
 					atmel,fifo-size = <64>;
 					atmel,nb-banks = <1>;
 				};
 
-				ep1 {
+				ep@1 {
 					reg = <1>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <2>;
@@ -315,7 +311,7 @@
 					atmel,can-isoc;
 				};
 
-				ep2 {
+				ep@2 {
 					reg = <2>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <2>;
@@ -323,21 +319,21 @@
 					atmel,can-isoc;
 				};
 
-				ep3 {
+				ep@3 {
 					reg = <3>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
 					atmel,can-dma;
 				};
 
-				ep4 {
+				ep@4 {
 					reg = <4>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
 					atmel,can-dma;
 				};
 
-				ep5 {
+				ep@5 {
 					reg = <5>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
@@ -345,7 +341,7 @@
 					atmel,can-isoc;
 				};
 
-				ep6 {
+				ep@6 {
 					reg = <6>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
@@ -442,8 +438,8 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
@@ -1093,7 +1089,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */
 			<&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */
@@ -1107,7 +1103,7 @@
 		status = "disabled";
 	};
 
-	i2c@1 {
+	i2c-gpio-1 {
 		compatible = "i2c-gpio";
 		gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */
 			<&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */
diff --git a/src/arm/at91sam9rlek.dts b/src/arm/at91sam9rlek.dts
index f10566f759cd..2e567d90fba8 100644
--- a/src/arm/at91sam9rlek.dts
+++ b/src/arm/at91sam9rlek.dts
@@ -227,11 +227,11 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 
-	i2c@1 {
+	i2c-gpio-1 {
 		status = "okay";
 	};
 };
diff --git a/src/arm/at91sam9x5.dtsi b/src/arm/at91sam9x5.dtsi
index cd0cd5fd09a3..f66bae925705 100644
--- a/src/arm/at91sam9x5.dtsi
+++ b/src/arm/at91sam9x5.dtsi
@@ -460,8 +460,8 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA9 periph A */
-							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA10 periph A with pullup */
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
@@ -1048,29 +1048,25 @@
 				atmel,adc-res-names = "lowres", "highres";
 				atmel,adc-use-res = "highres";
 
-				trigger@0 {
-					reg = <0>;
+				trigger0 {
 					trigger-name = "external-rising";
 					trigger-value = <0x1>;
 					trigger-external;
 				};
 
-				trigger@1 {
-					reg = <1>;
+				trigger1 {
 					trigger-name = "external-falling";
 					trigger-value = <0x2>;
 					trigger-external;
 				};
 
-				trigger@2 {
-					reg = <2>;
+				trigger2 {
 					trigger-name = "external-any";
 					trigger-value = <0x3>;
 					trigger-external;
 				};
 
-				trigger@3 {
-					reg = <3>;
+				trigger3 {
 					trigger-name = "continuous";
 					trigger-value = <0x6>;
 				};
@@ -1119,13 +1115,13 @@
 				clock-names = "hclk", "pclk";
 				status = "disabled";
 
-				ep0 {
+				ep@0 {
 					reg = <0>;
 					atmel,fifo-size = <64>;
 					atmel,nb-banks = <1>;
 				};
 
-				ep1 {
+				ep@1 {
 					reg = <1>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <2>;
@@ -1133,7 +1129,7 @@
 					atmel,can-isoc;
 				};
 
-				ep2 {
+				ep@2 {
 					reg = <2>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <2>;
@@ -1141,21 +1137,21 @@
 					atmel,can-isoc;
 				};
 
-				ep3 {
+				ep@3 {
 					reg = <3>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
 					atmel,can-dma;
 				};
 
-				ep4 {
+				ep@4 {
 					reg = <4>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
 					atmel,can-dma;
 				};
 
-				ep5 {
+				ep@5 {
 					reg = <5>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
@@ -1163,7 +1159,7 @@
 					atmel,can-isoc;
 				};
 
-				ep6 {
+				ep@6 {
 					reg = <6>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
@@ -1242,7 +1238,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
 			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
@@ -1257,7 +1253,7 @@
 		status = "disabled";
 	};
 
-	i2c@1 {
+	i2c-gpio-1 {
 		compatible = "i2c-gpio";
 		gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
 			 &pioC 1 GPIO_ACTIVE_HIGH /* scl */
@@ -1272,7 +1268,7 @@
 		status = "disabled";
 	};
 
-	i2c@2 {
+	i2c-gpio-2 {
 		compatible = "i2c-gpio";
 		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
 			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
diff --git a/src/arm/at91sam9x5ek.dtsi b/src/arm/at91sam9x5ek.dtsi
index 52425a4ca97e..696b8ba064a6 100644
--- a/src/arm/at91sam9x5ek.dtsi
+++ b/src/arm/at91sam9x5ek.dtsi
@@ -60,18 +60,6 @@
 				status = "okay";
 			};
 
-			isi: isi@f8048000 {
-				status = "disabled";
-				port {
-					isi_0: endpoint@0 {
-						remote-endpoint = <&ov2640_0>;
-						bus-width = <8>;
-						vsync-active = <1>;
-						hsync-active = <1>;
-					};
-				};
-			};
-
 			i2c0: i2c@f8010000 {
 				status = "okay";
 
@@ -79,27 +67,6 @@
 					compatible = "wm8731";
 					reg = <0x1a>;
 				};
-
-				ov2640: camera@0x30 {
-					compatible = "ovti,ov2640";
-					reg = <0x30>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
-					resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
-					pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
-					clocks = <&pck0>;
-					clock-names = "xvclk";
-					assigned-clocks = <&pck0>;
-					assigned-clock-rates = <25000000>;
-					status = "disabled";
-
-					port {
-						ov2640_0: endpoint {
-							remote-endpoint = <&isi_0>;
-							bus-width = <8>;
-						};
-					};
-				};
 			};
 
 			adc0: adc@f804c000 {
diff --git a/src/arm/axp209.dtsi b/src/arm/axp209.dtsi
index 051ab3ba9a65..675bb0f30825 100644
--- a/src/arm/axp209.dtsi
+++ b/src/arm/axp209.dtsi
@@ -53,6 +53,12 @@
 	interrupt-controller;
 	#interrupt-cells = <1>;
 
+	axp_gpio: gpio {
+		compatible = "x-powers,axp209-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	regulators {
 		/* Default work frequency for buck regulators */
 		x-powers,dcdc-freq = <1500>;
@@ -87,6 +93,7 @@
 
 		reg_ldo5: ldo5 {
 			regulator-name = "ldo5";
+			status = "disabled";
 		};
 	};
 
diff --git a/src/arm/axp22x.dtsi b/src/arm/axp22x.dtsi
index 76302f58c478..458b6681e3ec 100644
--- a/src/arm/axp22x.dtsi
+++ b/src/arm/axp22x.dtsi
@@ -126,10 +126,12 @@
 
 		reg_ldo_io0: ldo_io0 {
 			regulator-name = "ldo_io0";
+			status = "disabled";
 		};
 
 		reg_ldo_io1: ldo_io1 {
 			regulator-name = "ldo_io1";
+			status = "disabled";
 		};
 
 		reg_rtc_ldo: rtc_ldo {
@@ -139,5 +141,15 @@
 			regulator-max-microvolt = <3000000>;
 			regulator-name = "rtc_ldo";
 		};
+
+		reg_drivevbus: drivevbus {
+			regulator-name = "drivevbus";
+			status = "disabled";
+		};
+	};
+
+	usb_power_supply: usb_power_supply {
+		compatible = "x-powers,axp221-usb-power-supply";
+		status = "disabled";
 	};
 };
diff --git a/src/arm/axp809.dtsi b/src/arm/axp809.dtsi
new file mode 100644
index 000000000000..ab8e5f2d9246
--- /dev/null
+++ b/src/arm/axp809.dtsi
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP809 Integrated Power Management Chip
+ */
+
+&axp809 {
+	compatible = "x-powers,axp809";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+};
diff --git a/src/arm/bcm-cygnus.dtsi b/src/arm/bcm-cygnus.dtsi
index b42fe5596b94..8833a4c3cd96 100644
--- a/src/arm/bcm-cygnus.dtsi
+++ b/src/arm/bcm-cygnus.dtsi
@@ -91,6 +91,13 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
+		otp: otp@0301c800 {
+			compatible = "brcm,ocotp";
+			reg = <0x0301c800 0x2c>;
+			brcm,ocotp-size = <2048>;
+			status = "disabled";
+		};
+
 		pcie_phy: phy@0301d0a0 {
 			compatible = "brcm,cygnus-pcie-phy";
 			reg = <0x0301d0a0 0x14>;
@@ -108,12 +115,21 @@
 			};
 		};
 
-		pinctrl: pinctrl@0x0301d0c8 {
+		pinctrl: pinctrl@0301d0c8 {
 			compatible = "brcm,cygnus-pinmux";
 			reg = <0x0301d0c8 0x30>,
 			      <0x0301d24c 0x2c>;
 		};
 
+		mailbox: mailbox@03024024 {
+			compatible = "brcm,iproc-mailbox";
+			reg = <0x03024024 0x40>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			#mbox-cells = <1>;
+		};
+
 		gpio_crmu: gpio@03024800 {
 			compatible = "brcm,cygnus-crmu-gpio";
 			reg = <0x03024800 0x50>,
@@ -121,6 +137,9 @@
 			ngpios = <6>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&mailbox>;
+			interrupts = <0>;
 		};
 
 		i2c0: i2c@18008000 {
@@ -366,5 +385,16 @@
 			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
+
+		adc: adc@180a6000 {
+			compatible = "brcm,iproc-static-adc";
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			adc-syscon = <&ts_adc_syscon>;
+			clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
+			clock-names = "tsc_clk";
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/src/arm/bcm-nsp.dtsi b/src/arm/bcm-nsp.dtsi
index def9e783b5c6..15f07f9af3b3 100644
--- a/src/arm/bcm-nsp.dtsi
+++ b/src/arm/bcm-nsp.dtsi
@@ -57,7 +57,7 @@
 			compatible = "arm,cortex-a9";
 			next-level-cache = <&L2>;
 			enable-method = "brcm,bcm-nsp-smp";
-			secondary-boot-reg = <0xffff042c>;
+			secondary-boot-reg = <0xffff0fec>;
 			reg = <0x1>;
 		};
 	};
@@ -160,7 +160,7 @@
 
 	axi {
 		compatible = "simple-bus";
-		ranges = <0x00000000 0x18000000 0x0011ba08>;
+		ranges = <0x00000000 0x18000000 0x0011c40c>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
@@ -192,6 +192,41 @@
 			status = "disabled";
 		};
 
+		dma@20000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x20000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		amac0: ethernet@22000 {
+			compatible = "brcm,nsp-amac";
+			reg = <0x022000 0x1000>,
+			      <0x110000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		amac1: ethernet@23000 {
+			compatible = "brcm,nsp-amac";
+			reg = <0x023000 0x1000>,
+			      <0x111000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		nand: nand@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x026000 0x600>,
@@ -206,6 +241,58 @@
 			brcm,nand-has-wp;
 		};
 
+		gpiob: gpio@30000 {
+			compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio";
+			reg = <0x30000 0x50>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			ngpios = <4>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pwm: pwm@31000 {
+			compatible = "brcm,iproc-pwm";
+			reg = <0x31000 0x28>;
+			clocks = <&osc>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		rng: rng@33000 {
+			compatible = "brcm,bcm-nsp-rng";
+			reg = <0x33000 0x14>;
+		};
+
+		qspi: qspi@27200 {
+			compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
+			reg = <0x027200 0x184>,
+			      <0x027000 0x124>,
+			      <0x11c408 0x004>,
+			      <0x0273a0 0x01c>;
+			reg-names = "mspi", "bspi", "intr_regs",
+				    "intr_status_reg";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overhead",
+					  "mspi_done",
+					  "mspi_halted";
+			clocks = <&iprocmed>;
+			clock-names = "iprocmed";
+			num-cs = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		ccbtimer0: timer@34000 {
 			compatible = "arm,sp804";
 			reg = <0x34000 0x1000>;
@@ -224,6 +311,17 @@
 			clock-names = "apb_pclk";
 		};
 
+		srab: srab@36000 {
+			compatible = "brcm,nsp-srab";
+			reg = <0x36000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			/* ports are defined in board DTS */
+		};
+
 		i2c0: i2c@38000 {
 			compatible = "brcm,iproc-i2c";
 			reg = <0x38000 0x50>;
@@ -266,6 +364,48 @@
 			      <0x30028 0x04>,
 			      <0x3f408 0x04>;
 		};
+
+		sata_phy: sata_phy@40100 {
+			compatible = "brcm,iproc-nsp-sata-phy";
+			reg = <0x40100 0x340>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		sata: ahci@41000 {
+			compatible = "brcm,bcm-nsp-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0x41000 0x1000>, <0x40020 0x1c>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+				phy-names = "sata-phy";
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+				phy-names = "sata-phy";
+			};
+		};
 	};
 
 	pcie0: pcie@18012000 {
@@ -290,6 +430,18 @@
 		ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
 
 		status = "disabled";
+
+		msi-parent = <&msi0>;
+		msi0: msi@18012000 {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>,
+				     <GIC_SPI 128 IRQ_TYPE_NONE>,
+				     <GIC_SPI 129 IRQ_TYPE_NONE>,
+				     <GIC_SPI 130 IRQ_TYPE_NONE>;
+			brcm,pcie-msi-inten;
+		};
 	};
 
 	pcie1: pcie@18013000 {
@@ -314,6 +466,18 @@
 		ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
 
 		status = "disabled";
+
+		msi-parent = <&msi1>;
+		msi1: msi@18013000 {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_NONE>,
+				     <GIC_SPI 134 IRQ_TYPE_NONE>,
+				     <GIC_SPI 135 IRQ_TYPE_NONE>,
+				     <GIC_SPI 136 IRQ_TYPE_NONE>;
+			brcm,pcie-msi-inten;
+		};
 	};
 
 	pcie2: pcie@18014000 {
@@ -338,5 +502,17 @@
 		ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>;
 
 		status = "disabled";
+
+		msi-parent = <&msi2>;
+		msi2: msi@18014000 {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>,
+				     <GIC_SPI 140 IRQ_TYPE_NONE>,
+				     <GIC_SPI 141 IRQ_TYPE_NONE>,
+				     <GIC_SPI 142 IRQ_TYPE_NONE>;
+			brcm,pcie-msi-inten;
+		};
 	};
 };
diff --git a/src/arm/bcm11351.dtsi b/src/arm/bcm11351.dtsi
index 3dc7a8cc5812..18045c38bcf1 100644
--- a/src/arm/bcm11351.dtsi
+++ b/src/arm/bcm11351.dtsi
@@ -30,7 +30,6 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "brcm,bcm11351-cpu-method";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -41,6 +40,7 @@
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
+			enable-method = "brcm,bcm11351-cpu-method";
 			secondary-boot-reg = <0x3500417c>;
 			reg = <1>;
 		};
diff --git a/src/arm/bcm21664.dtsi b/src/arm/bcm21664.dtsi
index 3f525be28fd0..6dde95f21cef 100644
--- a/src/arm/bcm21664.dtsi
+++ b/src/arm/bcm21664.dtsi
@@ -30,7 +30,6 @@
        cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "brcm,bcm11351-cpu-method";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -41,6 +40,7 @@
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
+			enable-method = "brcm,bcm11351-cpu-method";
 			secondary-boot-reg = <0x35004178>;
 			reg = <1>;
 		};
diff --git a/src/arm/bcm23550-sparrow.dts b/src/arm/bcm23550-sparrow.dts
new file mode 100644
index 000000000000..4d525ccb48c8
--- /dev/null
+++ b/src/arm/bcm23550-sparrow.dts
@@ -0,0 +1,80 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm23550.dtsi"
+
+/ {
+	model = "BCM23550 Sparrow board";
+	compatible = "brcm,bcm23550-sparrow", "brcm,bcm23550";
+
+	chosen {
+		stdout-path = "/slaves@3e000000/serial@0:115200n8";
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+};
+
+&uartb {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&sdio1 {
+	max-frequency = <48000000>;
+	status = "okay";
+};
+
+&sdio2 {
+	non-removable;
+	max-frequency = <48000000>;
+	status = "okay";
+};
+
+&sdio4 {
+	max-frequency = <48000000>;
+	cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/src/arm/bcm23550.dtsi b/src/arm/bcm23550.dtsi
new file mode 100644
index 000000000000..a7a643f38385
--- /dev/null
+++ b/src/arm/bcm23550.dtsi
@@ -0,0 +1,415 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/* BCM23550 and BCM21664 have almost identical clocks */
+#include "dt-bindings/clock/bcm21664.h"
+
+#include "skeleton.dtsi"
+
+/ {
+	model = "BCM23550 SoC";
+	compatible = "brcm,bcm23550";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <1>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <2>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <3>;
+			clock-frequency = <1000000000>;
+		};
+	};
+
+	/* Hub bus */
+	hub@34000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x34000000 0x102f83ac>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		smc@4e000 {
+			compatible = "brcm,bcm23550-smc", "brcm,kona-smc";
+			reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */
+		};
+
+		resetmgr: reset-controller@1001f00 {
+			compatible = "brcm,bcm21664-resetmgr";
+			reg = <0x01001f00 0x24>;
+		};
+
+		gpio: gpio@1003000 {
+			compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio";
+			reg = <0x01003000 0x524>;
+			interrupts =
+			       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
+				GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
+				GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
+				GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+		};
+
+		timer@1006000 {
+			compatible = "brcm,kona-timer";
+			reg = <0x01006000 0x1c>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
+		};
+	};
+
+	/* Slaves bus */
+	slaves@3e000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x3e000000 0x0001c070>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uartb: serial@0 {
+			compatible = "snps,dw-apb-uart";
+			status = "disabled";
+			reg = <0x00000000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		uartb2: serial@1000 {
+			compatible = "snps,dw-apb-uart";
+			status = "disabled";
+			reg = <0x00001000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		uartb3: serial@2000 {
+			compatible = "snps,dw-apb-uart";
+			status = "disabled";
+			reg = <0x00002000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		bsc1: i2c@16000 {
+			compatible = "brcm,kona-i2c";
+			reg = <0x00016000 0x70>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
+			status = "disabled";
+		};
+
+		bsc2: i2c@17000 {
+			compatible = "brcm,kona-i2c";
+			reg = <0x00017000 0x70>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
+			status = "disabled";
+		};
+
+		bsc3: i2c@18000 {
+			compatible = "brcm,kona-i2c";
+			reg = <0x00018000 0x70>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
+			status = "disabled";
+		};
+
+		bsc4: i2c@1c000 {
+			compatible = "brcm,kona-i2c";
+			reg = <0x0001c000 0x70>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
+			status = "disabled";
+		};
+	};
+
+	/* Apps bus */
+	apps@3e300000 {
+		compatible = "simple-bus";
+		ranges = <0 0x3e300000 0x01b77000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		usbotg: usb@e20000 {
+			compatible = "snps,dwc2";
+			reg = <0x00e20000 0x10000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_otg_ahb_clk>;
+			clock-names = "otg";
+			phys = <&usbphy>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		usbphy: usb-phy@e30000 {
+			compatible = "brcm,kona-usb2-phy";
+			reg = <0x00e30000 0x28>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		sdio1: sdio@e80000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00e80000 0x801c>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
+			status = "disabled";
+		};
+
+		sdio2: sdio@e90000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00e90000 0x801c>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
+			status = "disabled";
+		};
+
+		sdio3: sdio@ea0000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00ea0000 0x801c>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
+			status = "disabled";
+		};
+
+		sdio4: sdio@eb0000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00eb0000 0x801c>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
+			status = "disabled";
+		};
+
+		cdc: cdc@1b0e000 {
+			compatible = "brcm,bcm23550-cdc";
+			reg = <0x01b0e000 0x78>;
+		};
+
+		gic: interrupt-controller@1b21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x01b21000 0x1000>,
+			      <0x01b22000 0x1000>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * Fixed clocks are defined before CCUs whose
+		 * clocks may depend on them.
+		 */
+
+		ref_32k_clk: ref_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		bbl_32k_clk: bbl_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		ref_13m_clk: ref_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		var_13m_clk: var_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		dft_19_5m_clk: dft_19_5m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19500000>;
+		};
+
+		ref_crystal_clk: ref_crystal {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+		};
+
+		ref_52m_clk: ref_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		var_52m_clk: var_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		usb_otg_ahb_clk: usb_otg_ahb {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		ref_96m_clk: ref_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		var_96m_clk: var_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		ref_104m_clk: ref_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		var_104m_clk: var_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		ref_156m_clk: ref_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		var_156m_clk: var_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		root_ccu: root_ccu {
+			compatible = BCM21664_DT_ROOT_CCU_COMPAT;
+			reg = <0x35001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "frac_1m";
+		};
+
+		aon_ccu: aon_ccu {
+			compatible = BCM21664_DT_AON_CCU_COMPAT;
+			reg = <0x35002000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "hub_timer";
+		};
+
+		slave_ccu: slave_ccu {
+			compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
+			reg = <0x3e011000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "uartb",
+					     "uartb2",
+					     "uartb3",
+					     "bsc1",
+					     "bsc2",
+					     "bsc3",
+					     "bsc4";
+		};
+
+		master_ccu: master_ccu {
+			compatible = BCM21664_DT_MASTER_CCU_COMPAT;
+			reg = <0x3f001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "sdio1",
+					     "sdio2",
+					     "sdio3",
+					     "sdio4",
+					     "sdio1_sleep",
+					     "sdio2_sleep",
+					     "sdio3_sleep",
+					     "sdio4_sleep";
+		};
+	};
+};
diff --git a/src/arm/bcm2835-rpi-a-plus.dts b/src/arm/bcm2835-rpi-a-plus.dts
index 35ff4e7a4aac..d0704540db6b 100644
--- a/src/arm/bcm2835-rpi-a-plus.dts
+++ b/src/arm/bcm2835-rpi-a-plus.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
 
 / {
 	compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
@@ -21,7 +22,72 @@
 };
 
 &gpio {
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
+	/*
+	 * This is based on the unreleased schematic for the Model A+.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "NC", /* GPIO30 */
+			  "NC", /* GPIO31 */
+			  "CAM_GPIO1", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "PWR_LOW_N", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "USB_LIMIT", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "PWM0_OUT", /* GPIO40 */
+			  "CAM_GPIO0", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "NC", /* GPIO43 */
+			  "NC", /* GPIO44 */
+			  "PWM1_OUT", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
 
 	/* I2S interface */
 	i2s_alt0: i2s_alt0 {
diff --git a/src/arm/bcm2835-rpi-a.dts b/src/arm/bcm2835-rpi-a.dts
index 306a84ee9898..46d078e29017 100644
--- a/src/arm/bcm2835-rpi-a.dts
+++ b/src/arm/bcm2835-rpi-a.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
 
 / {
 	compatible = "raspberrypi,model-a", "brcm,bcm2835";
@@ -14,7 +15,74 @@
 };
 
 &gpio {
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>;
+	/*
+	 * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf
+	 * RPI00021 sheet 02
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "CAM_GPIO1",
+			  "LAN_RUN",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "NC", /* GPIO12 */
+			  "NC", /* GPIO13 */
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "STATUS_LED_N",
+			  "GPIO17",
+			  "GPIO18",
+			  "NC", /* GPIO19 */
+			  "NC", /* GPIO20 */
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "NC", /* GPIO26 */
+			  "CAM_GPIO0",
+			  /* Binary number representing build/revision */
+			  "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "CONFIG3",
+			  "NC", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "PWM0_OUT",
+			  "NC", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "NC", /* GPIO43 */
+			  "NC", /* GPIO44 */
+			  "PWM1_OUT",
+			  "HDMI_HPD_P",
+			  "SD_CARD_DET",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
 
 	/* I2S interface */
 	i2s_alt2: i2s_alt2 {
diff --git a/src/arm/bcm2835-rpi-b-plus.dts b/src/arm/bcm2835-rpi-b-plus.dts
index 57d313b6afaf..432088ebb0a1 100644
--- a/src/arm/bcm2835-rpi-b-plus.dts
+++ b/src/arm/bcm2835-rpi-b-plus.dts
@@ -1,6 +1,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
 
 / {
 	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
@@ -21,7 +23,73 @@
 };
 
 &gpio {
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
+	/*
+	 * Taken from Raspberry-Pi-B-Plus-V1.2-Schematics.pdf
+	 * RPI-BPLUS sheet 1
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "NC", /* GPIO30 */
+			  "LAN_RUN", /* GPIO31 */
+			  "CAM_GPIO1", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "PWR_LOW_N", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "USB_LIMIT", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "PWM0_OUT", /* GPIO40 */
+			  "CAM_GPIO0", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "NC", /* GPIO43 */
+			  "ETHCLK", /* GPIO44 */
+			  "PWM1_OUT", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
 
 	/* I2S interface */
 	i2s_alt0: i2s_alt0 {
diff --git a/src/arm/bcm2835-rpi-b-rev2.dts b/src/arm/bcm2835-rpi-b-rev2.dts
index cf2774ec0834..4133bc2cd9be 100644
--- a/src/arm/bcm2835-rpi-b-rev2.dts
+++ b/src/arm/bcm2835-rpi-b-rev2.dts
@@ -1,6 +1,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9512.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
 
 / {
 	compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
@@ -14,7 +16,73 @@
 };
 
 &gpio {
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>;
+	/*
+	 * Taken from Raspberry-Pi-Rev-2.0-Model-AB-Schematics.pdf
+	 * RPI00022 sheet 02
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "CAM_CLK",
+			  "LAN_RUN",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "NC", /* GPIO12 */
+			  "NC", /* GPIO13 */
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "STATUS_LED_N",
+			  "GPIO17",
+			  "GPIO18",
+			  "NC", /* GPIO19 */
+			  "NC", /* GPIO20 */
+			  "CAM_GPIO",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "NC", /* GPIO26 */
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "NC", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "PWM0_OUT",
+			  "NC", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "NC", /* GPIO43 */
+			  "NC", /* GPIO44 */
+			  "PWM1_OUT",
+			  "HDMI_HPD_P",
+			  "SD_CARD_DET",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
 
 	/* I2S interface */
 	i2s_alt2: i2s_alt2 {
diff --git a/src/arm/bcm2835-rpi-b.dts b/src/arm/bcm2835-rpi-b.dts
index 8b15f9c35643..4d56fe3006b0 100644
--- a/src/arm/bcm2835-rpi-b.dts
+++ b/src/arm/bcm2835-rpi-b.dts
@@ -1,6 +1,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9512.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
 
 / {
 	compatible = "raspberrypi,model-b", "brcm,bcm2835";
@@ -14,7 +16,74 @@
 };
 
 &gpio {
-	pinctrl-0 = <&gpioout &alt0 &alt3>;
+	/*
+	 * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf
+	 * RPI00021 sheet 02
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "CAM_GPIO1",
+			  "LAN_RUN",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "NC", /* GPIO12 */
+			  "NC", /* GPIO13 */
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "STATUS_LED_N",
+			  "GPIO17",
+			  "GPIO18",
+			  "NC", /* GPIO19 */
+			  "NC", /* GPIO20 */
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "NC", /* GPIO26 */
+			  "CAM_GPIO0",
+			  /* Binary number representing build/revision */
+			  "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "CONFIG3",
+			  "NC", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "PWM0_OUT",
+			  "NC", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "NC", /* GPIO43 */
+			  "NC", /* GPIO44 */
+			  "PWM1_OUT",
+			  "HDMI_HPD_P",
+			  "SD_CARD_DET",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
 };
 
 &hdmi {
diff --git a/src/arm/bcm2835-rpi-zero.dts b/src/arm/bcm2835-rpi-zero.dts
new file mode 100644
index 000000000000..cc8b832c4c78
--- /dev/null
+++ b/src/arm/bcm2835-rpi-zero.dts
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2016 Stefan Wahren <stefan.wahren@i2se.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero", "brcm,bcm2835";
+	model = "Raspberry Pi Zero";
+
+	leds {
+		act {
+			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "NC", /* GPIO30 */
+			  "NC", /* GPIO31 */
+			  "CAM_GPIO1", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "NC", /* GPIO40 */
+			  "CAM_GPIO0", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "NC", /* GPIO43 */
+			  "NC", /* GPIO44 */
+			  "NC", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED_N",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
diff --git a/src/arm/bcm2835-rpi.dtsi b/src/arm/bcm2835-rpi.dtsi
index caf2707680c1..6ddf7dfe3f72 100644
--- a/src/arm/bcm2835-rpi.dtsi
+++ b/src/arm/bcm2835-rpi.dtsi
@@ -2,6 +2,7 @@
 
 / {
 	memory {
+		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
 
@@ -38,22 +39,21 @@
 	};
 
 	alt0: alt0 {
-		brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>;
+		brcm,pins = <4 5 7 8 9 10 11 14 15>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
-
-	alt3: alt3 {
-		brcm,pins = <48 49 50 51 52 53>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
 };
 
 &i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_gpio0>;
 	status = "okay";
 	clock-frequency = <100000>;
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_gpio2>;
 	status = "okay";
 	clock-frequency = <100000>;
 };
@@ -63,11 +63,15 @@
 };
 
 &sdhci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio48>;
 	status = "okay";
 	bus-width = <4>;
 };
 
 &pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
 	status = "okay";
 };
 
diff --git a/src/arm/bcm2835.dtsi b/src/arm/bcm2835.dtsi
index a78759e73710..0890d97e674d 100644
--- a/src/arm/bcm2835.dtsi
+++ b/src/arm/bcm2835.dtsi
@@ -23,3 +23,9 @@
 		};
 	};
 };
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2835-thermal";
+	status = "okay";
+};
diff --git a/src/arm/bcm2836-rpi-2-b.dts b/src/arm/bcm2836-rpi-2-b.dts
index c4743f42237b..bf19e8cfb9e6 100644
--- a/src/arm/bcm2836-rpi-2-b.dts
+++ b/src/arm/bcm2836-rpi-2-b.dts
@@ -1,6 +1,8 @@
 /dts-v1/;
 #include "bcm2836.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
 
 / {
 	compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
@@ -25,7 +27,7 @@
 };
 
 &gpio {
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
 
 	/* I2S interface */
 	i2s_alt0: i2s_alt0 {
diff --git a/src/arm/bcm2836.dtsi b/src/arm/bcm2836.dtsi
index 9d0651d8f373..519a44f5d25a 100644
--- a/src/arm/bcm2836.dtsi
+++ b/src/arm/bcm2836.dtsi
@@ -76,3 +76,9 @@
 	interrupt-parent = <&local_intc>;
 	interrupts = <8>;
 };
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2836-thermal";
+	status = "okay";
+};
diff --git a/src/arm/bcm283x-rpi-smsc9512.dtsi b/src/arm/bcm283x-rpi-smsc9512.dtsi
new file mode 100644
index 000000000000..12c981e51134
--- /dev/null
+++ b/src/arm/bcm283x-rpi-smsc9512.dtsi
@@ -0,0 +1,19 @@
+/ {
+	aliases {
+		ethernet = &ethernet;
+	};
+};
+
+&usb {
+	usb1@1 {
+		compatible = "usb424,9512";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: usbether@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+};
diff --git a/src/arm/bcm283x-rpi-smsc9514.dtsi b/src/arm/bcm283x-rpi-smsc9514.dtsi
new file mode 100644
index 000000000000..3f0a56ebcf1f
--- /dev/null
+++ b/src/arm/bcm283x-rpi-smsc9514.dtsi
@@ -0,0 +1,19 @@
+/ {
+	aliases {
+		ethernet = &ethernet;
+	};
+};
+
+&usb {
+	usb1@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: usbether@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+};
diff --git a/src/arm/bcm283x-rpi-usb-host.dtsi b/src/arm/bcm283x-rpi-usb-host.dtsi
new file mode 100644
index 000000000000..73f4ece8dcd0
--- /dev/null
+++ b/src/arm/bcm283x-rpi-usb-host.dtsi
@@ -0,0 +1,3 @@
+&usb {
+	dr_mode = "host";
+};
diff --git a/src/arm/bcm283x.dtsi b/src/arm/bcm283x.dtsi
index 10b27b912bac..9a44da190897 100644
--- a/src/arm/bcm283x.dtsi
+++ b/src/arm/bcm283x.dtsi
@@ -2,7 +2,6 @@
 #include <dt-bindings/clock/bcm2835.h>
 #include <dt-bindings/clock/bcm2835-aux.h>
 #include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
 
 /* This include file covers the common peripherals and configuration between
  * bcm2835 and bcm2836 implementations, leaving the CPU configuration to
@@ -13,6 +12,8 @@
 	compatible = "brcm,bcm2835";
 	model = "BCM2835";
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	chosen {
 		bootargs = "earlyprintk console=ttyAMA0";
@@ -103,7 +104,7 @@
 			reg = <0x7e104000 0x10>;
 		};
 
-		mailbox: mailbox@7e00b800 {
+		mailbox: mailbox@7e00b880 {
 			compatible = "brcm,bcm2835-mbox";
 			reg = <0x7e00b880 0x40>;
 			interrupts = <0 1>;
@@ -131,6 +132,209 @@
 
 			interrupt-controller;
 			#interrupt-cells = <2>;
+
+			/* Defines pin muxing groups according to
+			 * BCM2835-ARM-Peripherals.pdf page 102.
+			 *
+			 * While each pin can have its mux selected
+			 * for various functions individually, some
+			 * groups only make sense to switch to a
+			 * particular function together.
+			 */
+			dpi_gpio0: dpi_gpio0 {
+				brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
+					     12 13 14 15 16 17 18 19
+					     20 21 22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+			emmc_gpio22: emmc_gpio22 {
+				brcm,pins = <22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+			emmc_gpio34: emmc_gpio34 {
+				brcm,pins = <34 35 36 37 38 39>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+				brcm,pull = <BCM2835_PUD_OFF
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP>;
+			};
+			emmc_gpio48: emmc_gpio48 {
+				brcm,pins = <48 49 50 51 52 53>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+
+			gpclk0_gpio4: gpclk0_gpio4 {
+				brcm,pins = <4>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio5: gpclk1_gpio5 {
+				brcm,pins = <5>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio42: gpclk1_gpio42 {
+				brcm,pins = <42>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio44: gpclk1_gpio44 {
+				brcm,pins = <44>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk2_gpio6: gpclk2_gpio6 {
+				brcm,pins = <6>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk2_gpio43: gpclk2_gpio43 {
+				brcm,pins = <43>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+
+			i2c0_gpio0: i2c0_gpio0 {
+				brcm,pins = <0 1>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c0_gpio32: i2c0_gpio32 {
+				brcm,pins = <32 34>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c0_gpio44: i2c0_gpio44 {
+				brcm,pins = <44 45>;
+				brcm,function = <BCM2835_FSEL_ALT1>;
+			};
+			i2c1_gpio2: i2c1_gpio2 {
+				brcm,pins = <2 3>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c1_gpio44: i2c1_gpio44 {
+				brcm,pins = <44 45>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+			i2c_slave_gpio18: i2c_slave_gpio18 {
+				brcm,pins = <18 19 20 21>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+
+			jtag_gpio4: jtag_gpio4 {
+				brcm,pins = <4 5 6 12 13>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+			jtag_gpio22: jtag_gpio22 {
+				brcm,pins = <22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+
+			pcm_gpio18: pcm_gpio18 {
+				brcm,pins = <18 19 20 21>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pcm_gpio28: pcm_gpio28 {
+				brcm,pins = <28 29 30 31>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+
+			pwm0_gpio12: pwm0_gpio12 {
+				brcm,pins = <12>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pwm0_gpio18: pwm0_gpio18 {
+				brcm,pins = <18>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			pwm0_gpio40: pwm0_gpio40 {
+				brcm,pins = <40>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pwm1_gpio13: pwm1_gpio13 {
+				brcm,pins = <13>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pwm1_gpio19: pwm1_gpio19 {
+				brcm,pins = <19>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			pwm1_gpio41: pwm1_gpio41 {
+				brcm,pins = <41>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pwm1_gpio45: pwm1_gpio45 {
+				brcm,pins = <45>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+
+			sdhost_gpio48: sdhost_gpio48 {
+				brcm,pins = <48 49 50 51 52 53>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+
+			spi0_gpio7: spi0_gpio7 {
+				brcm,pins = <7 8 9 10 11>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			spi0_gpio35: spi0_gpio35 {
+				brcm,pins = <35 36 37 38 39>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			spi1_gpio16: spi1_gpio16 {
+				brcm,pins = <16 17 18 19 20 21>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+			spi2_gpio40: spi2_gpio40 {
+				brcm,pins = <40 41 42 43 44 45>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+
+			uart0_gpio14: uart0_gpio14 {
+				brcm,pins = <14 15>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			/* Separate from the uart0_gpio14 group
+			 * because it conflicts with spi1_gpio16, and
+			 * people often run uart0 on the two pins
+			 * without flow contrl.
+			 */
+			uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 {
+				brcm,pins = <16 17>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+			uart0_gpio30: uart0_gpio30 {
+				brcm,pins = <30 31>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+			uart0_ctsrts_gpio32: uart0_ctsrts_gpio32 {
+				brcm,pins = <32 33>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+
+			uart1_gpio14: uart1_gpio14 {
+				brcm,pins = <14 15>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio16: uart1_ctsrts_gpio16 {
+				brcm,pins = <16 17>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_gpio32: uart1_gpio32 {
+				brcm,pins = <32 33>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio30: uart1_ctsrts_gpio30 {
+				brcm,pins = <30 31>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_gpio36: uart1_gpio36 {
+				brcm,pins = <36 37 38 39>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+			uart1_gpio40: uart1_gpio40 {
+				brcm,pins = <40 41>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 {
+				brcm,pins = <42 43>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
 		};
 
 		uart0: serial@7e201000 {
@@ -186,6 +390,13 @@
 			interrupts = <2 14>; /* pwa1 */
 		};
 
+		thermal: thermal@7e212000 {
+			compatible = "brcm,bcm2835-thermal";
+			reg = <0x7e212000 0x8>;
+			clocks = <&clocks BCM2835_CLOCK_TSENS>;
+			status = "disabled";
+		};
+
 		aux: aux@0x7e215000 {
 			compatible = "brcm,bcm2835-aux";
 			#clock-cells = <1>;
@@ -287,6 +498,10 @@
 			compatible = "brcm,bcm2835-usb";
 			reg = <0x7e980000 0x10000>;
 			interrupts = <1 9>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clk_usb>;
+			clock-names = "otg";
 		};
 
 		v3d: v3d@7ec00000 {
@@ -314,5 +529,12 @@
 			clock-frequency = <19200000>;
 		};
 
+		clk_usb: clock@4 {
+			compatible = "fixed-clock";
+			reg = <4>;
+			#clock-cells = <0>;
+			clock-output-names = "otg";
+			clock-frequency = <480000000>;
+		};
 	};
 };
diff --git a/src/arm/bcm4708-buffalo-wzr-1750dhp.dts b/src/arm/bcm4708-buffalo-wzr-1750dhp.dts
index 5087aa81efb1..9cb186ea2e97 100644
--- a/src/arm/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/src/arm/bcm4708-buffalo-wzr-1750dhp.dts
@@ -147,3 +147,7 @@
 &usb3 {
 	vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 };
+
+&spi_nor {
+	status = "okay";
+};
diff --git a/src/arm/bcm4708-luxul-xap-1510.dts b/src/arm/bcm4708-luxul-xap-1510.dts
new file mode 100644
index 000000000000..35e6ed6a3ef7
--- /dev/null
+++ b/src/arm/bcm4708-luxul-xap-1510.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2016 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	compatible = "luxul,xap-1510v1", "brcm,bcm4708";
+	model = "Luxul XAP-1510 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&spi_nor {
+	status = "okay";
+};
diff --git a/src/arm/bcm4708-netgear-r6250.dts b/src/arm/bcm4708-netgear-r6250.dts
index 1049ab108b32..8ce39d58eeb8 100644
--- a/src/arm/bcm4708-netgear-r6250.dts
+++ b/src/arm/bcm4708-netgear-r6250.dts
@@ -90,3 +90,7 @@
 &usb3 {
 	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
 };
+
+&spi_nor {
+	status = "okay";
+};
diff --git a/src/arm/bcm4708-netgear-r6300-v2.dts b/src/arm/bcm4708-netgear-r6300-v2.dts
index 3a94606d042b..6229ef283c41 100644
--- a/src/arm/bcm4708-netgear-r6300-v2.dts
+++ b/src/arm/bcm4708-netgear-r6300-v2.dts
@@ -82,3 +82,7 @@
 		};
 	};
 };
+
+&spi_nor {
+	status = "okay";
+};
diff --git a/src/arm/bcm4708-smartrg-sr400ac.dts b/src/arm/bcm4708-smartrg-sr400ac.dts
index 8b0c440b2e71..70f4bb9d864a 100644
--- a/src/arm/bcm4708-smartrg-sr400ac.dts
+++ b/src/arm/bcm4708-smartrg-sr400ac.dts
@@ -126,3 +126,43 @@
 &spi_nor {
 	status = "okay";
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "lan4";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan3";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan1";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/src/arm/bcm4709-asus-rt-ac87u.dts b/src/arm/bcm4709-asus-rt-ac87u.dts
index 8ade7def2e8a..eac0f52e5ebd 100644
--- a/src/arm/bcm4709-asus-rt-ac87u.dts
+++ b/src/arm/bcm4709-asus-rt-ac87u.dts
@@ -9,7 +9,7 @@
 
 /dts-v1/;
 
-#include "bcm4708.dtsi"
+#include "bcm4709.dtsi"
 #include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
diff --git a/src/arm/bcm4709-buffalo-wxr-1900dhp.dts b/src/arm/bcm4709-buffalo-wxr-1900dhp.dts
index 791d7225c733..aab39c9864da 100644
--- a/src/arm/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/src/arm/bcm4709-buffalo-wxr-1900dhp.dts
@@ -9,7 +9,7 @@
 
 /dts-v1/;
 
-#include "bcm4708.dtsi"
+#include "bcm4709.dtsi"
 #include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
@@ -131,3 +131,7 @@
 &usb2 {
 	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
 };
+
+&spi_nor {
+	status = "okay";
+};
diff --git a/src/arm/bcm4709-netgear-r7000.dts b/src/arm/bcm4709-netgear-r7000.dts
index a22ed144040b..fd38d2aa3521 100644
--- a/src/arm/bcm4709-netgear-r7000.dts
+++ b/src/arm/bcm4709-netgear-r7000.dts
@@ -9,7 +9,7 @@
 
 /dts-v1/;
 
-#include "bcm4708.dtsi"
+#include "bcm4709.dtsi"
 #include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
diff --git a/src/arm/bcm4709-netgear-r8000.dts b/src/arm/bcm4709-netgear-r8000.dts
index ca181516c28a..92f8a7219e98 100644
--- a/src/arm/bcm4709-netgear-r8000.dts
+++ b/src/arm/bcm4709-netgear-r8000.dts
@@ -9,7 +9,7 @@
 
 /dts-v1/;
 
-#include "bcm4708.dtsi"
+#include "bcm4709.dtsi"
 #include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
@@ -107,6 +107,10 @@
 	};
 };
 
+&uart0 {
+	status = "okay";
+};
+
 &usb2 {
 	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
 };
diff --git a/src/arm/bcm4709-tplink-archer-c9-v1.dts b/src/arm/bcm4709-tplink-archer-c9-v1.dts
new file mode 100644
index 000000000000..9a92c24ac2d8
--- /dev/null
+++ b/src/arm/bcm4709-tplink-archer-c9-v1.dts
@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+
+/ {
+	compatible = "tplink,archer-c9-v1", "brcm,bcm4709", "brcm,bcm4708";
+	model = "TP-LINK Archer C9 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		lan {
+			label = "bcm53xx:blue:lan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wps {
+			label = "bcm53xx:blue:wps";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		usb3 {
+			label = "bcm53xx:blue:usb3";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		usb2 {
+			label = "bcm53xx:blue:usb2";
+			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wan-blue {
+			label = "bcm53xx:blue:wan";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		power {
+			label = "bcm53xx:blue:power";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
diff --git a/src/arm/bcm4709.dtsi b/src/arm/bcm4709.dtsi
new file mode 100644
index 000000000000..f03976597a6d
--- /dev/null
+++ b/src/arm/bcm4709.dtsi
@@ -0,0 +1,11 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+#include "bcm4708.dtsi"
+
+&uart0 {
+	clock-frequency = <125000000>;
+};
diff --git a/src/arm/bcm47094-dlink-dir-885l.dts b/src/arm/bcm47094-dlink-dir-885l.dts
index ace38efd2db3..661348dbb7ce 100644
--- a/src/arm/bcm47094-dlink-dir-885l.dts
+++ b/src/arm/bcm47094-dlink-dir-885l.dts
@@ -9,8 +9,8 @@
 
 /dts-v1/;
 
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch1.dtsi"
 
 / {
 	compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
@@ -107,9 +107,12 @@
 
 &uart0 {
 	status = "okay";
-	clock-frequency = <125000000>;
 };
 
 &usb3 {
 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 };
+
+&spi_nor {
+	status = "okay";
+};
diff --git a/src/arm/bcm47094-luxul-xwr-3100.dts b/src/arm/bcm47094-luxul-xwr-3100.dts
new file mode 100644
index 000000000000..169b35fe5651
--- /dev/null
+++ b/src/arm/bcm47094-luxul-xwr-3100.dts
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2016 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+	compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XWR-3100 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power	{
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		lan3	{
+			label = "bcm53xx:green:lan1";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		lan4	{
+			label = "bcm53xx:green:lan0";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		wan	{
+			label = "bcm53xx:green:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		lan1	{
+			label = "bcm53xx:green:lan3";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		lan2	{
+			label = "bcm53xx:green:lan2";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		usb3	{
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		status	{
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
diff --git a/src/arm/bcm47094-netgear-r8500.dts b/src/arm/bcm47094-netgear-r8500.dts
new file mode 100644
index 000000000000..521b4155de60
--- /dev/null
+++ b/src/arm/bcm47094-netgear-r8500.dts
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "netgear,r8500", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Netgear R8500";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power0 {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		power1 {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		5ghz-1 {
+			label = "bcm53xx:white:5ghz-1";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		5ghz-2 {
+			label = "bcm53xx:white:5ghz-2";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		usb2 {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		usb3 {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		brightness {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+
+		rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm/bcm47094.dtsi b/src/arm/bcm47094.dtsi
new file mode 100644
index 000000000000..4f09aa0114e6
--- /dev/null
+++ b/src/arm/bcm47094.dtsi
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+#include "bcm4708.dtsi"
+
+/ {
+	usb3_phy: usb3-phy {
+		compatible = "brcm,ns-bx-usb3-phy";
+	};
+};
+
+&uart0 {
+	clock-frequency = <125000000>;
+};
diff --git a/src/arm/bcm47189-tenda-ac9.dts b/src/arm/bcm47189-tenda-ac9.dts
new file mode 100644
index 000000000000..4403ae8790c2
--- /dev/null
+++ b/src/arm/bcm47189-tenda-ac9.dts
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+	compatible = "tenda,ac9", "brcm,bcm47189", "brcm,bcm53573";
+	model = "Tenda AC9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		usb {
+			label = "bcm53xx:blue:usb";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wps {
+			label = "bcm53xx:blue:wps";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		system {
+			label = "bcm53xx:blue:system";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/src/arm/bcm5301x-nand-cs0-bch1.dtsi b/src/arm/bcm5301x-nand-cs0-bch1.dtsi
new file mode 100644
index 000000000000..24b099c00f13
--- /dev/null
+++ b/src/arm/bcm5301x-nand-cs0-bch1.dtsi
@@ -0,0 +1,15 @@
+/*
+ * Broadcom Northstar NAND.
+ *
+ * Copyright (C) 2016 Rafał Miłecki <rafal.milecki@gmail.com>
+ *
+ * Licensed under the ISC license.
+ */
+
+#include "bcm5301x-nand-cs0.dtsi"
+
+&nandcs {
+	nand-ecc-algo = "bch";
+	nand-ecc-strength = <1>;
+	nand-ecc-step-size = <512>;
+};
diff --git a/src/arm/bcm5301x-nand-cs0-bch4.dtsi b/src/arm/bcm5301x-nand-cs0-bch4.dtsi
new file mode 100644
index 000000000000..b4e875df9528
--- /dev/null
+++ b/src/arm/bcm5301x-nand-cs0-bch4.dtsi
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2016 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+#include "bcm5301x-nand-cs0.dtsi"
+
+&nandcs {
+	nand-ecc-algo = "bch";
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+};
diff --git a/src/arm/bcm5301x-nand-cs0-bch8.dtsi b/src/arm/bcm5301x-nand-cs0-bch8.dtsi
index d10781e36f54..9a9630ded306 100644
--- a/src/arm/bcm5301x-nand-cs0-bch8.dtsi
+++ b/src/arm/bcm5301x-nand-cs0-bch8.dtsi
@@ -9,16 +9,10 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
-/ {
-	nand@18028000 {
-		nandcs@0 {
-			compatible = "brcm,nandcs";
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
+#include "bcm5301x-nand-cs0.dtsi"
 
-			nand-ecc-strength = <8>;
-			nand-ecc-step-size = <512>;
-		};
-	};
+&nandcs {
+	nand-ecc-algo = "bch";
+	nand-ecc-strength = <8>;
+	nand-ecc-step-size = <512>;
 };
diff --git a/src/arm/bcm5301x-nand-cs0.dtsi b/src/arm/bcm5301x-nand-cs0.dtsi
new file mode 100644
index 000000000000..168495106b82
--- /dev/null
+++ b/src/arm/bcm5301x-nand-cs0.dtsi
@@ -0,0 +1,18 @@
+/*
+ * Broadcom Northstar NAND.
+ *
+ * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/ {
+	nand@18028000 {
+		nandcs: nandcs@0 {
+			compatible = "brcm,nandcs";
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
diff --git a/src/arm/bcm5301x.dtsi b/src/arm/bcm5301x.dtsi
index 7d4d29bf0ed3..f09a2bb08979 100644
--- a/src/arm/bcm5301x.dtsi
+++ b/src/arm/bcm5301x.dtsi
@@ -140,6 +140,22 @@
 		};
 	};
 
+	usb2_phy: usb2-phy {
+		compatible = "brcm,ns-usb2-phy";
+		reg = <0x1800c000 0x1000>;
+		reg-names = "dmu";
+		#phy-cells = <0>;
+		clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+		clock-names = "phy-ref-clk";
+	};
+
+	usb3_phy: usb3-phy {
+		compatible = "brcm,ns-ax-usb3-phy";
+		reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
+		reg-names = "dmp", "ccb-mii";
+		#phy-cells = <0>;
+	};
+
 	axi@18000000 {
 		compatible = "brcm,bus-axi";
 		reg = <0x18000000 0x1000>;
@@ -153,6 +169,21 @@
 			/* ChipCommon */
 			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
 
+			/* Switch Register Access Block */
+			<0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+
 			/* PCIe Controller 0 */
 			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
 			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
@@ -217,6 +248,8 @@
 
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			phys = <&usb2_phy>;
 		};
 
 		usb3: usb3@23000 {
@@ -239,6 +272,22 @@
 				status = "disabled";
 			};
 		};
+
+		gmac0: ethernet@24000 {
+			reg = <0x24000 0x800>;
+		};
+
+		gmac1: ethernet@25000 {
+			reg = <0x25000 0x800>;
+		};
+
+		gmac2: ethernet@26000 {
+			reg = <0x26000 0x800>;
+		};
+
+		gmac3: ethernet@27000 {
+			reg = <0x27000 0x800>;
+		};
 	};
 
 	lcpll0: lcpll0@1800c100 {
@@ -260,6 +309,22 @@
 				     "sata2";
 	};
 
+	srab: srab@18007000 {
+		compatible = "brcm,bcm5301x-srab";
+		reg = <0x18007000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		status = "disabled";
+
+		/* ports are defined in board DTS */
+	};
+
+	rng: rng@18004000 {
+		compatible = "brcm,bcm5301x-rng";
+		reg = <0x18004000 0x14>;
+	};
+
 	nand: nand@18028000 {
 		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
 		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
diff --git a/src/arm/bcm53573.dtsi b/src/arm/bcm53573.dtsi
new file mode 100644
index 000000000000..e2c496a96c32
--- /dev/null
+++ b/src/arm/bcm53573.dtsi
@@ -0,0 +1,159 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+	};
+
+	mpcore {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18310000 0x00008000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+			      <0x2000 0x0100>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		alp: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <40000000>;
+		};
+	};
+
+	axi@18000000 {
+		compatible = "brcm,bus-axi";
+		reg = <0x18000000 0x1000>;
+		ranges = <0x00000000 0x18000000 0x00100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0x000fffff 0xffff>;
+		interrupt-map =
+			/* ChipCommon */
+			<0x00000000 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* IEEE 802.11 0 */
+			<0x00001000 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 0 */
+			<0x00002000 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 1 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 3 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 4 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 5 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* USB 2.0 Controller */
+			<0x00004000 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 0 */
+			<0x00005000 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* IEEE 802.11 1 */
+			<0x0000a000 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 1 */
+			<0x0000b000 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+		chipcommon: chipcommon@0 {
+			compatible = "simple-bus";
+			reg = <0x00000000 0x1000>;
+			ranges;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			uart0: serial@0300 {
+				compatible = "ns16550a";
+				reg = <0x0300 0x100>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_PPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&alp>;
+				status = "okay";
+			};
+		};
+
+		usb2: usb2@4000 {
+			reg = <0x4000 0x1000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ehci: ehci@4000 {
+				compatible = "generic-ehci";
+				reg = <0x4000 0x1000>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			ohci: ohci@d000 {
+				#usb-cells = <0>;
+
+				compatible = "generic-ohci";
+				reg = <0xd000 0x1000>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gmac0: ethernet@5000 {
+			reg = <0x5000 0x1000>;
+		};
+
+		gmac1: ethernet@b000 {
+			reg = <0xb000 0x1000>;
+		};
+
+		pmu@12000 {
+			compatible = "simple-mfd", "syscon";
+			reg = <0x00012000 0x00001000>;
+
+			ilp: ilp {
+				compatible = "brcm,bcm53573-ilp";
+				clocks = <&alp>;
+				#clock-cells = <0>;
+				clock-output-names = "ilp";
+			};
+		};
+	};
+};
diff --git a/src/arm/bcm953012er.dts b/src/arm/bcm953012er.dts
new file mode 100644
index 000000000000..0a9abecf9423
--- /dev/null
+++ b/src/arm/bcm953012er.dts
@@ -0,0 +1,104 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom. All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	model = "NorthStar Enterprise Router (BCM953012ER)";
+	compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x00000000 0x8000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "port0";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "port1";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/src/arm/bcm958522er.dts b/src/arm/bcm958522er.dts
new file mode 100644
index 000000000000..a21b0fd21f4e
--- /dev/null
+++ b/src/arm/bcm958522er.dts
@@ -0,0 +1,130 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958522ER)";
+	compatible = "brcm,bcm58522", "brcm,nsp";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+/* USB 2/3 support needed to be complete */
+
+&amac0 {
+	status = "okay";
+};
+
+
+&amac1 {
+	status = "okay";
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm/bcm958525er.dts b/src/arm/bcm958525er.dts
new file mode 100644
index 000000000000..be7f2f8ecf39
--- /dev/null
+++ b/src/arm/bcm958525er.dts
@@ -0,0 +1,142 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958525ER)";
+	compatible = "brcm,bcm58525", "brcm,nsp";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+/* USB 2/3 support needed to be complete */
+
+&amac0 {
+	status = "okay";
+};
+
+
+&amac1 {
+	status = "okay";
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm/bcm958525xmc.dts b/src/arm/bcm958525xmc.dts
new file mode 100644
index 000000000000..959cde911c3c
--- /dev/null
+++ b/src/arm/bcm958525xmc.dts
@@ -0,0 +1,151 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus XMC (BCM958525xmc)";
+	compatible = "brcm,bcm58525", "brcm,nsp";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 31 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+&i2c0 {
+	temperature-sensor@4c {
+		compatible = "adi,adt7461a";
+		reg = <0x4c>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "st,m41t81";
+		reg = <0x68>;
+	};
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+/* XHCI, MMC, and Ethernet support needed to be complete */
+
+&uart0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
diff --git a/src/arm/bcm958622hr.dts b/src/arm/bcm958622hr.dts
new file mode 100644
index 000000000000..ad2aa87dd15a
--- /dev/null
+++ b/src/arm/bcm958622hr.dts
@@ -0,0 +1,170 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958622HR)";
+	compatible = "brcm,bcm58622", "brcm,nsp";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+/* USB 2/3 and SLIC support needed to be complete */
+
+&amac0 {
+	status = "okay";
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm58622-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@5 {
+			ethernet = <&amac0>;
+			label = "cpu";
+			reg = <5>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm/bcm958623hr.dts b/src/arm/bcm958623hr.dts
new file mode 100644
index 000000000000..4ceb8fef8041
--- /dev/null
+++ b/src/arm/bcm958623hr.dts
@@ -0,0 +1,178 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958623HR)";
+	compatible = "brcm,bcm58623", "brcm,nsp";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+/* USB 2/3 and SLIC support needed to be complete */
+
+&amac0 {
+	status = "okay";
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm58623-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@5 {
+			ethernet = <&amac0>;
+			label = "cpu";
+			reg = <5>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm/bcm958625hr.dts b/src/arm/bcm958625hr.dts
new file mode 100644
index 000000000000..442002597063
--- /dev/null
+++ b/src/arm/bcm958625hr.dts
@@ -0,0 +1,180 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright (c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958625HR)";
+	compatible = "brcm,bcm58625", "brcm,nsp";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&amac0 {
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@5 {
+			ethernet = <&amac0>;
+			label = "cpu";
+			reg = <5>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/src/arm/bcm958625k.dts b/src/arm/bcm958625k.dts
index e298450b49b2..59d96fb91583 100644
--- a/src/arm/bcm958625k.dts
+++ b/src/arm/bcm958625k.dts
@@ -46,6 +46,11 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
 };
 
 &uart0 {
@@ -56,6 +61,14 @@
 	status = "okay";
 };
 
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
 &pcie0 {
 	status = "okay";
 };
@@ -68,6 +81,18 @@
 	status = "okay";
 };
 
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
 &nand {
 	nandcs@0 {
 		compatible = "brcm,nandcs";
@@ -114,3 +139,37 @@
 		groups = "nand_grp";
 	};
 };
+
+&qspi {
+	bspi-sel = <0>;
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
diff --git a/src/arm/bcm988312hr.dts b/src/arm/bcm988312hr.dts
new file mode 100644
index 000000000000..104afe98a43b
--- /dev/null
+++ b/src/arm/bcm988312hr.dts
@@ -0,0 +1,182 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM988312HR)";
+	compatible = "brcm,bcm88312", "brcm,nsp";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+/* USB 2/3 support needed to be complete */
+
+&amac0 {
+	status = "okay";
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm88312-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@5 {
+			ethernet = <&amac0>;
+			label = "cpu";
+			reg = <5>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm/berlin2-sony-nsz-gs7.dts b/src/arm/berlin2-sony-nsz-gs7.dts
index 3c0907b87fd6..1c475796d17f 100644
--- a/src/arm/berlin2-sony-nsz-gs7.dts
+++ b/src/arm/berlin2-sony-nsz-gs7.dts
@@ -49,7 +49,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x40000000>; /* 1 GB */
 	};
diff --git a/src/arm/berlin2.dtsi b/src/arm/berlin2.dtsi
index ae81009741ff..425c48971abe 100644
--- a/src/arm/berlin2.dtsi
+++ b/src/arm/berlin2.dtsi
@@ -39,13 +39,14 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/berlin2.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	model = "Marvell Armada 1500 (BG2) SoC";
 	compatible = "marvell,berlin2", "marvell,berlin";
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		serial0 = &uart0;
@@ -89,7 +90,7 @@
 		clock-frequency = <25000000>;
 	};
 
-	soc {
+	soc@f7000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -447,7 +448,6 @@
 				reg = <0x2000 0x100>;
 				clocks = <&refclk>;
 				interrupts = <1>;
-				status = "disabled";
 			};
 
 			wdt2: watchdog@3000 {
@@ -455,7 +455,6 @@
 				reg = <0x3000 0x100>;
 				clocks = <&refclk>;
 				interrupts = <2>;
-				status = "disabled";
 			};
 
 			sm_gpio1: gpio@5000 {
diff --git a/src/arm/berlin2cd-google-chromecast.dts b/src/arm/berlin2cd-google-chromecast.dts
index 8ba8b50ce997..ca24def0ce13 100644
--- a/src/arm/berlin2cd-google-chromecast.dts
+++ b/src/arm/berlin2cd-google-chromecast.dts
@@ -50,7 +50,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MB */
 	};
diff --git a/src/arm/berlin2cd.dtsi b/src/arm/berlin2cd.dtsi
index 6d06b6118d83..4fe1574d08c3 100644
--- a/src/arm/berlin2cd.dtsi
+++ b/src/arm/berlin2cd.dtsi
@@ -39,13 +39,14 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/berlin2.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	model = "Marvell Armada 1500-mini (BG2CD) SoC";
 	compatible = "marvell,berlin2cd", "marvell,berlin";
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		serial0 = &uart0;
@@ -78,7 +79,7 @@
 		clock-frequency = <25000000>;
 	};
 
-	soc {
+	soc@f7000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/src/arm/berlin2q-marvell-dmp.dts b/src/arm/berlin2q-marvell-dmp.dts
index 33b28757b8f6..57aa5f8a7c77 100644
--- a/src/arm/berlin2q-marvell-dmp.dts
+++ b/src/arm/berlin2q-marvell-dmp.dts
@@ -43,12 +43,12 @@
 	model = "Marvell BG2-Q DMP";
 	compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000>;
 	};
 
-	choosen {
+	chosen {
 		bootargs = "earlyprintk";
 		stdout-path = "serial0:115200n8";
 	};
@@ -58,7 +58,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		reg_usb0_vbus: regulator@0 {
+		reg_usb0_vbus: regulator_usb0 {
 			compatible = "regulator-fixed";
 			regulator-name = "usb0_vbus";
 			regulator-min-microvolt = <5000000>;
@@ -67,7 +67,7 @@
 			enable-active-high;
 		};
 
-		reg_usb1_vbus: regulator@1 {
+		reg_usb1_vbus: regulator_usb1 {
 			compatible = "regulator-fixed";
 			regulator-name = "usb1_vbus";
 			regulator-min-microvolt = <5000000>;
@@ -76,7 +76,7 @@
 			enable-active-high;
 		};
 
-		reg_usb2_vbus: regulator@2 {
+		reg_usb2_vbus: regulator_usb2 {
 			compatible = "regulator-fixed";
 			regulator-name = "usb2_vbus";
 			regulator-min-microvolt = <5000000>;
@@ -85,7 +85,7 @@
 			enable-active-high;
 		};
 
-		reg_sdio1_vmmc: regulator@3 {
+		reg_sdio1_vmmc: regulator_sdio1_vmmc {
 			compatible = "regulator-fixed";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
@@ -95,7 +95,7 @@
 			gpio = <&portb 21 GPIO_ACTIVE_HIGH>;
 		};
 
-		reg_sdio1_vqmmc: regulator@4 {
+		reg_sdio1_vqmmc: regulator_sido1_vqmmc {
 			compatible = "regulator-gpio";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <3300000>;
diff --git a/src/arm/berlin2q.dtsi b/src/arm/berlin2q.dtsi
index 2c34bfb13632..e548229697fc 100644
--- a/src/arm/berlin2q.dtsi
+++ b/src/arm/berlin2q.dtsi
@@ -37,11 +37,11 @@
 #include <dt-bindings/clock/berlin2q.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-#include "skeleton.dtsi"
-
 / {
 	model = "Marvell Armada 1500 pro (BG2-Q) SoC";
 	compatible = "marvell,berlin2q", "marvell,berlin";
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		serial0 = &uart0;
@@ -99,7 +99,7 @@
 		clock-frequency = <25000000>;
 	};
 
-	soc {
+	soc@f7000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -525,7 +525,6 @@
 				reg = <0x2000 0x100>;
 				clocks = <&refclk>;
 				interrupts = <1>;
-				status = "disabled";
 			};
 
 			wdt2: watchdog@3000 {
@@ -533,7 +532,6 @@
 				reg = <0x3000 0x100>;
 				clocks = <&refclk>;
 				interrupts = <2>;
-				status = "disabled";
 			};
 
 			sm_gpio1: gpio@5000 {
diff --git a/src/arm/cloudengines-pogoplug-series-3.dts b/src/arm/cloudengines-pogoplug-series-3.dts
new file mode 100644
index 000000000000..bfde32e37123
--- /dev/null
+++ b/src/arm/cloudengines-pogoplug-series-3.dts
@@ -0,0 +1,94 @@
+/*
+ * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3
+ *
+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/dts-v1/;
+#include "ox820.dtsi"
+
+/ {
+	model = "Cloud Engines PogoPlug Series 3";
+
+	compatible = "cloudengines,pogoplugv3", "oxsemi,ox820";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		/* 128Mbytes DDR */
+		reg = <0x60000000 0x8000000>;
+	};
+
+	aliases {
+		serial0 = &uart0;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "pogoplug:blue";
+			gpios = <&gpio0 2 0>;
+			default-state = "keep";
+		};
+
+		orange {
+			label = "pogoplug:orange";
+			gpios = <&gpio1 16 1>;
+			default-state = "keep";
+		};
+
+		green {
+			label = "pogoplug:green";
+			gpios = <&gpio1 17 1>;
+			default-state = "keep";
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+};
+
+&nandc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-ecc-mode = "soft";
+		nand-ecc-algo = "hamming";
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x00e00000>;
+			read-only;
+		};
+
+		partition@e00000 {
+			label = "ubi";
+			reg = <0x00e00000 0x07200000>;
+		};
+	};
+};
+
+&etha {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_etha_mdio>;
+};
diff --git a/src/arm/compulab-sb-som.dtsi b/src/arm/compulab-sb-som.dtsi
index 93d7e235bc80..4af1adfee788 100644
--- a/src/arm/compulab-sb-som.dtsi
+++ b/src/arm/compulab-sb-som.dtsi
@@ -40,7 +40,7 @@
 		};
 	};
 
-	hdmi_conn: connector@0 {
+	hdmi_conn: connector {
 		compatible = "hdmi-connector";
 		label = "hdmi";
 
diff --git a/src/arm/da850-evm.dts b/src/arm/da850-evm.dts
index 1a15db8e376b..78492a0bbbab 100644
--- a/src/arm/da850-evm.dts
+++ b/src/arm/da850-evm.dts
@@ -29,6 +29,20 @@
 					0x04 0x00011000 0x000ff000
 				>;
 			};
+			nand_pins: nand_pins {
+				pinctrl-single,bits = <
+					/* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[4], EMA_CS[3] */
+					0x1c 0x10110110  0xf0ff0ff0
+					/*
+					 * EMA_D[0], EMA_D[1], EMA_D[2],
+					 * EMA_D[3], EMA_D[4], EMA_D[5],
+					 * EMA_D[6], EMA_D[7]
+					 */
+					0x24 0x11111111  0xffffffff
+					/* EMA_A[1], EMA_A[2] */
+					0x30 0x01100000  0x0ff00000
+				>;
+			};
 		};
 		serial0: serial@42000 {
 			status = "okay";
@@ -85,6 +99,7 @@
 				#size-cells = <1>;
 				compatible = "m25p64";
 				spi-max-frequency = <30000000>;
+				m25p,fast-read;
 				reg = <0>;
 				partition@0 {
 					label = "U-Boot-SPL";
@@ -131,12 +146,7 @@
 			status = "okay";
 		};
 	};
-	nand_cs3@62000000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&nand_cs3_pins>;
-	};
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -250,3 +260,33 @@
 &edma1 {
 	ti,edma-reserved-slot-ranges = <32 90>;
 };
+
+&aemif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins>;
+	status = "ok";
+	cs3 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <3>;
+
+		nand@2000000,0 {
+			compatible = "ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0x02000000 0x02000000
+			       1 0x00000000 0x00008000>;
+
+			ti,davinci-chipselect = <1>;
+			ti,davinci-mask-ale = <0>;
+			ti,davinci-mask-cle = <0>;
+			ti,davinci-mask-chipsel = <0>;
+			ti,davinci-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			ti,davinci-nand-use-bbt;
+		};
+	};
+};
diff --git a/src/arm/da850-lcdk.dts b/src/arm/da850-lcdk.dts
new file mode 100644
index 000000000000..afcb4821deb1
--- /dev/null
+++ b/src/arm/da850-lcdk.dts
@@ -0,0 +1,238 @@
+/*
+ * Copyright (c) 2016 BayLibre, Inc.
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+#include "da850.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "DA850/AM1808/OMAP-L138 LCDK";
+	compatible = "ti,da850-lcdk", "ti,da850";
+
+	aliases {
+		serial2 = &serial2;
+		ethernet0 = &eth0;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0xc0000000 0x08000000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "DA850/OMAP-L138 LCDK";
+		simple-audio-card,widgets =
+			"Line", "Line In",
+			"Line", "Line Out";
+		simple-audio-card,routing =
+			"LINE1L", "Line In",
+			"LINE1R", "Line In",
+			"Line Out", "LLOUT",
+			"Line Out", "RLOUT";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&link0_codec>;
+		simple-audio-card,frame-master = <&link0_codec>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+			system-clock-frequency = <24576000>;
+		};
+
+		link0_codec: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <24576000>;
+		};
+	};
+};
+
+&pmx_core {
+	status = "okay";
+
+	mcasp0_pins: pinmux_mcasp0_pins {
+		pinctrl-single,bits = <
+			/* AHCLKX AFSX ACLKX */
+			0x00 0x00101010 0x00f0f0f0
+			/* ARX13 ARX14 */
+			0x04 0x00000110 0x00000ff0
+		>;
+	};
+
+	nand_pins: nand_pins {
+		pinctrl-single,bits = <
+			/* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[3] */
+			0x1c 0x10110010  0xf0ff00f0
+			/*
+			 * EMA_D[0], EMA_D[1], EMA_D[2],
+			 * EMA_D[3], EMA_D[4], EMA_D[5],
+			 * EMA_D[6], EMA_D[7]
+			 */
+			0x24 0x11111111  0xffffffff
+			/*
+			 * EMA_D[8],  EMA_D[9],  EMA_D[10],
+			 * EMA_D[11], EMA_D[12], EMA_D[13],
+			 * EMA_D[14], EMA_D[15]
+			 */
+			0x20 0x11111111  0xffffffff
+			/* EMA_A[1], EMA_A[2] */
+			0x30 0x01100000  0x0ff00000
+		>;
+	};
+};
+
+&serial2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&serial2_rxtx_pins>;
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	bus_freq = <2200000>;
+	status = "okay";
+};
+
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mii_pins>;
+	status = "okay";
+};
+
+&mmc0 {
+	max-frequency = <50000000>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	tlv320aic3106: tlv320aic3106@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x18>;
+		status = "okay";
+	};
+};
+
+&mcasp0 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+	status = "okay";
+
+	op-mode = <0>;   /* DAVINCI_MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <   /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 0 0
+		0 0 0 0
+		0 0 0 0
+		0 1 2 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&aemif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins>;
+	status = "okay";
+	cs3 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <3>;
+
+		nand@2000000,0 {
+			compatible = "ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0x02000000 0x02000000
+			       1 0x00000000 0x00008000>;
+
+			ti,davinci-chipselect = <1>;
+			ti,davinci-mask-ale = <0>;
+			ti,davinci-mask-cle = <0>;
+			ti,davinci-mask-chipsel = <0>;
+
+			ti,davinci-nand-buswidth = <16>;
+			ti,davinci-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			ti,davinci-nand-use-bbt;
+
+			/*
+			 * The OMAP-L132/L138 Bootloader doc SPRAB41E reads:
+			 * "To boot from NAND Flash, the AIS should be written
+			 * to NAND block 1 (NAND block 0 is not used by default)".
+			 * The same doc mentions that for ROM "Silicon Revision 2.1",
+			 * "Updated NAND boot mode to offer boot from block 0 or block 1".
+			 * However the limitaion is left here by default for compatibility
+			 * with older silicon and because it needs new boot pin settings
+			 * not possible in stock LCDK.
+			 */
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "u-boot env";
+					reg = <0 0x020000>;
+				};
+				partition@0x020000 {
+					/* The LCDK defaults to booting from this partition */
+					label = "u-boot";
+					reg = <0x020000 0x080000>;
+				};
+				partition@0x0a0000 {
+					label = "free space";
+					reg = <0x0a0000 0>;
+				};
+			};
+		};
+	};
+};
+
+&prictrl {
+	status = "okay";
+};
+
+&memctrl {
+	status = "okay";
+};
diff --git a/src/arm/da850.dtsi b/src/arm/da850.dtsi
index 25f0f8e6dde5..104155d12c2f 100644
--- a/src/arm/da850.dtsi
+++ b/src/arm/da850.dtsi
@@ -36,25 +36,46 @@
 			reg = <0x14120 0x50>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#pinctrl-cells = <2>;
 			pinctrl-single,bit-per-mux;
 			pinctrl-single,register-width = <32>;
 			pinctrl-single,function-mask = <0xf>;
 			status = "disabled";
 
-			nand_cs3_pins: pinmux_nand_pins {
+			serial0_rtscts_pins: pinmux_serial0_rtscts_pins {
 				pinctrl-single,bits = <
-					/* EMA_OE, EMA_WE */
-					0x1c 0x00110000  0x00ff0000
-					/* EMA_CS[4],EMA_CS[3]*/
-					0x1c 0x00000110  0x00000ff0
-					/*
-					 * EMA_D[0], EMA_D[1], EMA_D[2],
-					 * EMA_D[3], EMA_D[4], EMA_D[5],
-					 * EMA_D[6], EMA_D[7]
-					 */
-					0x24 0x11111111  0xffffffff
-					/* EMA_A[1], EMA_A[2] */
-					0x30 0x01100000  0x0ff00000
+					/* UART0_RTS UART0_CTS */
+					0x0c 0x22000000 0xff000000
+				>;
+			};
+			serial0_rxtx_pins: pinmux_serial0_rxtx_pins {
+				pinctrl-single,bits = <
+					/* UART0_TXD UART0_RXD */
+					0x0c 0x00220000 0x00ff0000
+				>;
+			};
+			serial1_rtscts_pins: pinmux_serial1_rtscts_pins {
+				pinctrl-single,bits = <
+					/* UART1_CTS UART1_RTS */
+					0x00 0x00440000 0x00ff0000
+				>;
+			};
+			serial1_rxtx_pins: pinmux_serial1_rxtx_pins {
+				pinctrl-single,bits = <
+					/* UART1_TXD UART1_RXD */
+					0x10 0x22000000 0xff000000
+				>;
+			};
+			serial2_rtscts_pins: pinmux_serial2_rtscts_pins {
+				pinctrl-single,bits = <
+					/* UART2_CTS UART2_RTS */
+					0x00 0x44000000 0xff000000
+				>;
+			};
+			serial2_rxtx_pins: pinmux_serial2_rxtx_pins {
+				pinctrl-single,bits = <
+					/* UART2_TXD UART2_RXD */
+					0x10 0x00220000 0x00ff0000
 				>;
 			};
 			i2c0_pins: pinmux_i2c0_pins {
@@ -166,8 +187,44 @@
 					0xc 0x88888888 0xffffffff
 				>;
 			};
+			lcd_pins: pinmux_lcd_pins {
+				pinctrl-single,bits = <
+					/*
+					 * LCD_D[2], LCD_D[3], LCD_D[4], LCD_D[5],
+					 * LCD_D[6], LCD_D[7]
+					 */
+					0x40 0x22222200 0xffffff00
+					/*
+					 * LCD_D[10], LCD_D[11], LCD_D[12], LCD_D[13],
+					 * LCD_D[14], LCD_D[15], LCD_D[0], LCD_D[1]
+					 */
+					0x44 0x22222222 0xffffffff
+					/* LCD_D[8], LCD_D[9] */
+					0x48 0x00000022 0x000000ff
+
+					/* LCD_PCLK */
+					0x48 0x02000000 0x0f000000
+					/* LCD_AC_ENB_CS, LCD_VSYNC, LCD_HSYNC */
+					0x4c 0x02000022 0x0f0000ff
+				>;
+			};
 
 		};
+		prictrl: priority-controller@14110 {
+			compatible = "ti,da850-mstpri";
+			reg = <0x14110 0x0c>;
+			status = "disabled";
+		};
+		cfgchip: chip-controller@1417c {
+			compatible = "ti,da830-cfgchip", "syscon", "simple-mfd";
+			reg = <0x1417c 0x14>;
+
+			usb_phy: usb-phy {
+				compatible = "ti,da830-usb-phy";
+				#phy-cells = <1>;
+				status = "disabled";
+			};
+		};
 		edma0: edma@0 {
 			compatible = "ti,edma3-tpcc";
 			/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
@@ -260,6 +317,8 @@
 		mmc0: mmc@40000 {
 			compatible = "ti,da830-mmc";
 			reg = <0x40000 0x1000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
 			interrupts = <16>;
 			dmas = <&edma0 16 0>, <&edma0 17 0>;
 			dma-names = "rx", "tx";
@@ -268,37 +327,44 @@
 		mmc1: mmc@21b000 {
 			compatible = "ti,da830-mmc";
 			reg = <0x21b000 0x1000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
 			interrupts = <72>;
 			dmas = <&edma1 28 0>, <&edma1 29 0>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 		ehrpwm0: pwm@300000 {
-			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+			compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
+				     "ti,am33xx-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x300000 0x2000>;
 			status = "disabled";
 		};
 		ehrpwm1: pwm@302000 {
-			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+			compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
+				     "ti,am33xx-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x302000 0x2000>;
 			status = "disabled";
 		};
 		ecap0: ecap@306000 {
-			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+			compatible = "ti,da850-ecap", "ti,am3352-ecap",
+				     "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x306000 0x80>;
 			status = "disabled";
 		};
 		ecap1: ecap@307000 {
-			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+			compatible = "ti,da850-ecap", "ti,am3352-ecap",
+				     "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x307000 0x80>;
 			status = "disabled";
 		};
 		ecap2: ecap@308000 {
-			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+			compatible = "ti,da850-ecap", "ti,am3352-ecap",
+				     "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x308000 0x80>;
 			status = "disabled";
@@ -311,6 +377,8 @@
 			num-cs = <6>;
 			ti,davinci-spi-intr-line = <1>;
 			interrupts = <20>;
+			dmas = <&edma0 14 0>, <&edma0 15 0>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 		spi1: spi@30e000 {
@@ -325,6 +393,16 @@
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};
+		usb0: usb@200000 {
+			compatible = "ti,da830-musb";
+			reg = <0x200000 0x10000>;
+			interrupts = <58>;
+			interrupt-names = "mc";
+			dr_mode = "otg";
+			phys = <&usb_phy 0>;
+			phy-names = "usb-phy";
+			status = "disabled";
+		};
 		mdio: mdio@224000 {
 			compatible = "ti,davinci_mdio";
 			#address-cells = <1>;
@@ -361,6 +439,11 @@
 			ti,davinci-gpio-unbanked = <0>;
 			status = "disabled";
 		};
+		pinconf: pin-controller@22c00c {
+			compatible = "ti,da850-pupd";
+			reg = <0x22c00c 0x8>;
+			status = "disabled";
+		};
 
 		mcasp0: mcasp@100000 {
 			compatible = "ti,da830-mcasp-audio";
@@ -374,18 +457,27 @@
 				<&edma0 0 1>;
 			dma-names = "tx", "rx";
 		};
+
+		display: display@213000 {
+			compatible = "ti,da850-tilcdc";
+			reg = <0x213000 0x1000>;
+			interrupts = <52>;
+			status = "disabled";
+		};
+	};
+	aemif: aemif@68000000 {
+		compatible = "ti,da850-aemif";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		reg = <0x68000000 0x00008000>;
+		ranges = <0 0 0x60000000 0x08000000
+			  1 0 0x68000000 0x00008000>;
+		status = "disabled";
 	};
-	nand_cs3@62000000 {
-		compatible = "ti,davinci-nand";
-		reg = <0x62000000 0x807ff
-		       0x68000000 0x8000>;
-		ti,davinci-chipselect = <1>;
-		ti,davinci-mask-ale = <0>;
-		ti,davinci-mask-cle = <0>;
-		ti,davinci-mask-chipsel = <0>;
-		ti,davinci-ecc-mode = "hw";
-		ti,davinci-ecc-bits = <4>;
-		ti,davinci-nand-use-bbt;
+	memctrl: memory-controller@b0000000 {
+		compatible = "ti,da850-ddr-controller";
+		reg = <0xb0000000 0xe8>;
 		status = "disabled";
 	};
 };
diff --git a/src/arm/dm8148-evm.dts b/src/arm/dm8148-evm.dts
index 4128fa91823c..d6657b3bae84 100644
--- a/src/arm/dm8148-evm.dts
+++ b/src/arm/dm8148-evm.dts
@@ -12,13 +12,13 @@
 	model = "DM8148 EVM";
 	compatible = "ti,dm8148-evm", "ti,dm8148";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>;	/* 1 GB */
 	};
 
 	/* MIC94060YC6 controlled by SD1_POW pin */
-	vmmcsd_fixed: fixedregulator@0 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm/dm8148-t410.dts b/src/arm/dm8148-t410.dts
index 3f184863e0c5..63883b3479f9 100644
--- a/src/arm/dm8148-t410.dts
+++ b/src/arm/dm8148-t410.dts
@@ -11,7 +11,7 @@
 	model = "HP t410 Smart Zero Client";
 	compatible = "hp,t410", "ti,dm8148";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>;	/* 1 GB */
 	};
@@ -27,7 +27,7 @@
 		regulator-always-on;
 	};
 
-	vmmcsd_fixed: fixedregulator@0 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm/dm814x.dtsi b/src/arm/dm814x.dtsi
index d4537dc61497..81b8cecb5820 100644
--- a/src/arm/dm814x.dtsi
+++ b/src/arm/dm814x.dtsi
@@ -7,11 +7,12 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/dm814x.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "ti,dm814";
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
 
 	aliases {
 		i2c0 = &i2c1;
@@ -373,6 +374,7 @@
 					reg = <0x800 0x438>;
 					#address-cells = <1>;
 					#size-cells = <0>;
+					#pinctrl-cells = <1>;
 					pinctrl-single,register-width = <32>;
 					pinctrl-single,function-mask = <0x307ff>;
 				};
@@ -448,7 +450,7 @@
 			reg =	<0x49000000 0x10000>;
 			reg-names = "edma3_cc";
 			interrupts = <12 13 14>;
-			interrupt-names = "edma3_ccint", "emda3_mperr",
+			interrupt-names = "edma3_ccint", "edma3_mperr",
 					  "edma3_ccerrint";
 			dma-requests = <64>;
 			#dma-cells = <2>;
@@ -509,7 +511,6 @@
 			ale_entries = <1024>;
 			bd_ram_size = <0x2000>;
 			no_bd_ram = <0>;
-			rx_descs = <64>;
 			mac_control = <0x20>;
 			slaves = <2>;
 			active_slave = <0>;
diff --git a/src/arm/dm8168-evm.dts b/src/arm/dm8168-evm.dts
index f50348bdd857..0bf55fa72dea 100644
--- a/src/arm/dm8168-evm.dts
+++ b/src/arm/dm8168-evm.dts
@@ -12,14 +12,14 @@
 	model = "DM8168 EVM";
 	compatible = "ti,dm8168-evm", "ti,dm8168";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000	/* 1 GB */
 		       0xc0000000 0x40000000>;	/* 1 GB */
 	};
 
 	/* FDC6331L controlled by SD_POW pin */
-	vmmcsd_fixed: fixedregulator@0 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm/dm816x.dtsi b/src/arm/dm816x.dtsi
index 44e39c743b53..6db652ae9bd5 100644
--- a/src/arm/dm816x.dtsi
+++ b/src/arm/dm816x.dtsi
@@ -7,11 +7,12 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/omap.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "ti,dm816";
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
 
 	aliases {
 		i2c0 = &i2c1;
@@ -83,6 +84,7 @@
 			reg = <0x48140000 0x21000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			#pinctrl-cells = <1>;
 			ranges = <0 0x48140000 0x21000>;
 
 			dm816x_pinmux: pinmux@800 {
@@ -90,6 +92,7 @@
 				reg = <0x800 0x50a>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				#pinctrl-cells = <1>;
 				pinctrl-single,register-width = <16>;
 				pinctrl-single,function-mask = <0xf>;
 			};
diff --git a/src/arm/dra62x-j5eco-evm.dts b/src/arm/dra62x-j5eco-evm.dts
index f820573f4a4a..155eb32ee213 100644
--- a/src/arm/dra62x-j5eco-evm.dts
+++ b/src/arm/dra62x-j5eco-evm.dts
@@ -12,13 +12,13 @@
 	model = "DRA62x J5 Eco EVM";
 	compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>;	/* 1 GB */
 	};
 
 	/* MIC94060YC6 controlled by SD1_POW pin */
-	vmmcsd_fixed: fixedregulator@0 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm/dra7-evm.dts b/src/arm/dra7-evm.dts
index bafcfac067ec..132f2be10889 100644
--- a/src/arm/dra7-evm.dts
+++ b/src/arm/dra7-evm.dts
@@ -16,7 +16,7 @@
 	model = "TI DRA742";
 	compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
 	};
@@ -105,25 +105,25 @@
 
 	leds {
 		compatible = "gpio-leds";
-		led@0 {
+		led0 {
 			label = "dra7:usr1";
 			gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		led@1 {
+		led1 {
 			label = "dra7:usr2";
 			gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "dra7:usr3";
 			gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "dra7:usr4";
 			gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
 			default-state = "off";
@@ -664,10 +664,10 @@
 &qspi {
 	status = "okay";
 
-	spi-max-frequency = <64000000>;
+	spi-max-frequency = <76800000>;
 	m25p80@0 {
 		compatible = "s25fl256s1";
-		spi-max-frequency = <64000000>;
+		spi-max-frequency = <76800000>;
 		reg = <0>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
diff --git a/src/arm/dra7.dtsi b/src/arm/dra7.dtsi
index 3a8f3976f6f9..5ba161679e01 100644
--- a/src/arm/dra7.dtsi
+++ b/src/arm/dra7.dtsi
@@ -10,8 +10,6 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/dra.h>
 
-#include "skeleton.dtsi"
-
 #define MAX_SOURCES 400
 
 / {
@@ -20,6 +18,7 @@
 
 	compatible = "ti,dra7xx";
 	interrupt-parent = <&crossbar_mpu>;
+	chosen { };
 
 	aliases {
 		i2c0 = &i2c1;
@@ -73,6 +72,33 @@
 		interrupt-parent = <&gic>;
 	};
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+
+			operating-points = <
+				/* kHz    uV */
+				1000000	1060000
+				1176000	1160000
+				>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+
+			/* cooling options */
+			cooling-min-level = <0>;
+			cooling-max-level = <2>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
 	/*
 	 * The soc node represents the soc top level view. It is used for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.
@@ -146,6 +172,7 @@
 					reg = <0x1400 0x0468>;
 					#address-cells = <1>;
 					#size-cells = <0>;
+					#pinctrl-cells = <1>;
 					#interrupt-cells = <1>;
 					interrupt-controller;
 					pinctrl-single,register-width = <32>;
@@ -233,6 +260,11 @@
 				prm_clockdomains: clockdomains {
 				};
 			};
+
+			scm_wkup: scm_conf@c000 {
+				compatible = "syscon";
+				reg = <0xc000 0x1000>;
+			};
 		};
 
 		axi@0 {
@@ -253,6 +285,7 @@
 					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
+				linux,pci-domain = <0>;
 				ti,hwmods = "pcie1";
 				phys = <&pcie1_phy>;
 				phy-names = "pcie-phy0";
@@ -276,7 +309,7 @@
 			ranges = <0x51800000 0x51800000 0x3000
 				  0x0	     0x30000000 0x10000000>;
 			status = "disabled";
-			pcie@51000000 {
+			pcie@51800000 {
 				compatible = "ti,dra7-pcie";
 				reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
 				reg-names = "rc_dbics", "ti_conf", "config";
@@ -288,6 +321,7 @@
 					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
+				linux,pci-domain = <1>;
 				ti,hwmods = "pcie2";
 				phys = <&pcie2_phy>;
 				phy-names = "pcie-phy0";
@@ -304,6 +338,53 @@
 			};
 		};
 
+		ocmcram1: ocmcram@40300000 {
+			compatible = "mmio-sram";
+			reg = <0x40300000 0x80000>;
+			ranges = <0x0 0x40300000 0x80000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/*
+			 * This is a placeholder for an optional reserved
+			 * region for use by secure software. The size
+			 * of this region is not known until runtime so it
+			 * is set as zero to either be updated to reserve
+			 * space or left unchanged to leave all SRAM for use.
+			 * On HS parts that that require the reserved region
+			 * either the bootloader can update the size to
+			 * the required amount or the node can be overridden
+			 * from the board dts file for the secure platform.
+			 */
+			sram-hs@0 {
+				compatible = "ti,secure-ram";
+				reg = <0x0 0x0>;
+			};
+		};
+
+		/*
+		 * NOTE: ocmcram2 and ocmcram3 are not available on all
+		 * DRA7xx and AM57xx variants. Confirm availability in
+		 * the data manual for the exact part number in use
+		 * before enabling these nodes in the board dts file.
+		 */
+		ocmcram2: ocmcram@40400000 {
+			status = "disabled";
+			compatible = "mmio-sram";
+			reg = <0x40400000 0x100000>;
+			ranges = <0x0 0x40400000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		ocmcram3: ocmcram@40500000 {
+			status = "disabled";
+			compatible = "mmio-sram";
+			reg = <0x40500000 0x100000>;
+			ranges = <0x0 0x40500000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
 		bandgap: bandgap@4a0021e0 {
 			reg = <0x4a0021e0 0xc
 				0x4a00232c 0xc
@@ -341,7 +422,7 @@
 			interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_ccint", "emda3_mperr",
+			interrupt-names = "edma3_ccint", "edma3_mperr",
 					  "edma3_ccerrint";
 			dma-requests = <64>;
 			#dma-cells = <2>;
@@ -1297,6 +1378,7 @@
 			phy-names = "sata-phy";
 			clocks = <&sata_ref_clk>;
 			ti,hwmods = "sata";
+			ports-implemented = <0x1>;
 		};
 
 		rtc: rtc@48838000 {
@@ -1318,7 +1400,7 @@
 			ti,hwmods = "ocp2scp1";
 
 			usb2_phy1: phy@4a084000 {
-				compatible = "ti,omap-usb2";
+				compatible = "ti,dra7x-usb2", "ti,omap-usb2";
 				reg = <0x4a084000 0x400>;
 				syscon-phy-power = <&scm_conf 0x300>;
 				clocks = <&usb_phy1_always_on_clk32k>,
@@ -1622,17 +1704,16 @@
 		mac: ethernet@48484000 {
 			compatible = "ti,dra7-cpsw","ti,cpsw";
 			ti,hwmods = "gmac";
-			clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>;
+			clocks = <&gmac_main_clk>, <&gmac_rft_clk_mux>;
 			clock-names = "fck", "cpts";
 			cpdma_channels = <8>;
 			ale_entries = <1024>;
 			bd_ram_size = <0x2000>;
 			no_bd_ram = <0>;
-			rx_descs = <64>;
 			mac_control = <0x20>;
 			slaves = <2>;
 			active_slave = <0>;
-			cpts_clock_mult = <0x80000000>;
+			cpts_clock_mult = <0x784CFE14>;
 			cpts_clock_shift = <29>;
 			reg = <0x48484000 0x1000
 			       0x48485200 0x2E00>;
@@ -1663,7 +1744,7 @@
 			status = "disabled";
 
 			davinci_mdio: mdio@48485000 {
-				compatible = "ti,davinci_mdio";
+				compatible = "ti,cpsw-mdio","ti,davinci_mdio";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				ti,hwmods = "davinci_mdio";
@@ -1745,6 +1826,149 @@
 				clock-names = "fck", "sys_clk";
 			};
 		};
+
+		epwmss0: epwmss@4843e000 {
+			compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+			reg = <0x4843e000 0x30>;
+			ti,hwmods = "epwmss0";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges;
+
+			ehrpwm0: pwm@4843e200 {
+				compatible = "ti,dra746-ehrpwm",
+					     "ti,am3352-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x4843e200 0x80>;
+				clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
+				clock-names = "tbclk", "fck";
+				status = "disabled";
+			};
+
+			ecap0: ecap@4843e100 {
+				compatible = "ti,dra746-ecap",
+					     "ti,am3352-ecap";
+				#pwm-cells = <3>;
+				reg = <0x4843e100 0x80>;
+				clocks = <&l4_root_clk_div>;
+				clock-names = "fck";
+				status = "disabled";
+			};
+		};
+
+		epwmss1: epwmss@48440000 {
+			compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+			reg = <0x48440000 0x30>;
+			ti,hwmods = "epwmss1";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges;
+
+			ehrpwm1: pwm@48440200 {
+				compatible = "ti,dra746-ehrpwm",
+					     "ti,am3352-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48440200 0x80>;
+				clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>;
+				clock-names = "tbclk", "fck";
+				status = "disabled";
+			};
+
+			ecap1: ecap@48440100 {
+				compatible = "ti,dra746-ecap",
+					     "ti,am3352-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48440100 0x80>;
+				clocks = <&l4_root_clk_div>;
+				clock-names = "fck";
+				status = "disabled";
+			};
+		};
+
+		epwmss2: epwmss@48442000 {
+			compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+			reg = <0x48442000 0x30>;
+			ti,hwmods = "epwmss2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges;
+
+			ehrpwm2: pwm@48442200 {
+				compatible = "ti,dra746-ehrpwm",
+					     "ti,am3352-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48442200 0x80>;
+				clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>;
+				clock-names = "tbclk", "fck";
+				status = "disabled";
+			};
+
+			ecap2: ecap@48442100 {
+				compatible = "ti,dra746-ecap",
+					     "ti,am3352-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48442100 0x80>;
+				clocks = <&l4_root_clk_div>;
+				clock-names = "fck";
+				status = "disabled";
+			};
+		};
+
+		aes1: aes@4b500000 {
+			compatible = "ti,omap4-aes";
+			ti,hwmods = "aes1";
+			reg = <0x4b500000 0xa0>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
+			dma-names = "tx", "rx";
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
+		};
+
+		aes2: aes@4b700000 {
+			compatible = "ti,omap4-aes";
+			ti,hwmods = "aes2";
+			reg = <0x4b700000 0xa0>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
+			dma-names = "tx", "rx";
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
+		};
+
+		des: des@480a5000 {
+			compatible = "ti,omap4-des";
+			ti,hwmods = "des";
+			reg = <0x480a5000 0xa0>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
+			dma-names = "tx", "rx";
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
+		};
+
+		sham: sham@53100000 {
+			compatible = "ti,omap5-sham";
+			ti,hwmods = "sham";
+			reg = <0x4b101000 0x300>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma_xbar 119 0>;
+			dma-names = "rx";
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
+		};
+
+		rng: rng@48090000 {
+			compatible = "ti,omap4-rng";
+			ti,hwmods = "rng";
+			reg = <0x48090000 0x2000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
+		};
 	};
 
 	thermal_zones: thermal-zones {
diff --git a/src/arm/dra71-evm.dts b/src/arm/dra71-evm.dts
new file mode 100644
index 000000000000..2b9a5a8d69ad
--- /dev/null
+++ b/src/arm/dra71-evm.dts
@@ -0,0 +1,230 @@
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "dra72-evm-common.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7";
+	model = "TI DRA718 EVM";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
+	};
+
+	vpo_sd_1v8_3v3: gpio-regulator-TPS74801 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "vddshv8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-boot-on;
+		vin-supply = <&evm_5v0>;
+
+		gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0
+			  3000000 0x1>;
+	};
+
+	poweroff: gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>;
+		input;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	lp8733: lp8733@60 {
+		compatible = "ti,lp8733";
+		reg = <0x60>;
+
+		buck0-in-supply =<&vsys_3v3>;
+		buck1-in-supply =<&vsys_3v3>;
+		ldo0-in-supply =<&evm_5v0>;
+		ldo1-in-supply =<&evm_5v0>;
+
+		lp8733_regulators: regulators {
+			lp8733_buck0_reg: buck0 {
+				/* FB_B0 -> LP8733-BUCK1 - VPO_S1_AVS - VDD_CORE_AVS (core, mpu, gpu) */
+				regulator-name = "lp8733-buck0";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			lp8733_buck1_reg: buck1 {
+				/* FB_B1 -> LP8733-BUCK2 - VPO_S2_AVS - VDD_DSP_AVS (DSP/eve/iva) */
+				regulator-name = "lp8733-buck1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			lp8733_ldo0_reg: ldo0 {
+				/* LDO0 -> LP8733-LDO1 - VPO_L1_3V3 - VDDSHV8 (optional) */
+				regulator-name = "lp8733-ldo0";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			lp8733_ldo1_reg: ldo1 {
+				/* LDO1 -> LP8733-LDO2 - VPO_L2_3V3 - VDDA_USB3V3 */
+				regulator-name = "lp8733-ldo1";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	lp8732: lp8732@61 {
+		compatible = "ti,lp8732";
+		reg = <0x61>;
+
+		buck0-in-supply =<&vsys_3v3>;
+		buck1-in-supply =<&vsys_3v3>;
+		ldo0-in-supply =<&vsys_3v3>;
+		ldo1-in-supply =<&vsys_3v3>;
+
+		lp8732_regulators: regulators {
+			lp8732_buck0_reg: buck0 {
+				/* FB_B0 -> LP8732-BUCK1 - VPO_S3_1V8 - VDDS_1V8 */
+				regulator-name = "lp8732-buck0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			lp8732_buck1_reg: buck1 {
+				/* FB_B1 -> LP8732-BUCK2 - VPO_S4_DDR - VDD_DDR_1V35 */
+				regulator-name = "lp8732-buck1";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			lp8732_ldo0_reg: ldo0 {
+				/* LDO0 -> LP8732-LDO1 - VPO_L3_1V8 - VDA_1V8_PLL */
+				regulator-name = "lp8732-ldo0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			lp8732_ldo1_reg: ldo1 {
+				/* LDO1 -> LP8732-LDO2 - VPO_L4_1V8 - VDA_1V8_PHY */
+				regulator-name = "lp8732-ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&pcf_gpio_21 {
+	interrupt-parent = <&gpio7>;
+	interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&pcf_hdmi {
+	p0 {
+		/*
+		 * PM_OEn to High: Disable routing I2C3 to PM_I2C
+		 * With this PM_SEL(p3) should not matter
+		 */
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "pm_oe_n";
+	};
+};
+
+&mmc1 {
+	vmmc_aux-supply = <&vpo_sd_1v8_3v3>;
+};
+
+&mac {
+	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
+		     <&pcf_hdmi 9 GPIO_ACTIVE_LOW>,	/* P11 */
+		     <&pcf_hdmi 10 GPIO_ACTIVE_LOW>;	/* P12 */
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <2>;
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <3>;
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	dp83867_0: ethernet-phy@2 {
+		reg = <2>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,impedance-control = <0x1f>;
+	};
+
+	dp83867_1: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,impedance-control = <0x1f>;
+	};
+};
+
+/* No Sata on this device */
+&sata_phy {
+	status = "disabled";
+};
+
+&sata {
+	status = "disabled";
+};
+
+/* No RTC on this device */
+&rtc {
+	status = "disabled";
+};
+
+&usb2_phy1 {
+	phy-supply = <&lp8733_ldo1_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&lp8733_ldo1_reg>;
+};
+
+&dss {
+	/* Supplied by VDA_1V8_PLL */
+	vdda_video-supply = <&lp8732_ldo0_reg>;
+};
+
+&hdmi {
+	/* Supplied by VDA_1V8_PHY */
+	vdda_video-supply = <&lp8732_ldo1_reg>;
+};
diff --git a/src/arm/dra72-evm-common.dtsi b/src/arm/dra72-evm-common.dtsi
index 093538ea5b5f..e50fbeea96e0 100644
--- a/src/arm/dra72-evm-common.dtsi
+++ b/src/arm/dra72-evm-common.dtsi
@@ -18,18 +18,56 @@
 		display0 = &hdmi0;
 	};
 
-	evm_3v3: fixedregulator-evm_3v3 {
+	evm_12v0: fixedregulator-evm12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	evm_5v0: fixedregulator-evm5v0 {
+		/* Output 1 of TPS43351QDAPRQ1 on dra72-evm */
+		/* Output 1 of LM5140QRWGTQ1 on dra71-evm */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* Output 2 of TPS43351QDAPRQ1 on dra72-evm */
+		/* Output 2 of LM5140QRWGTQ1 on dra71-evm */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	evm_3v3_sw: fixedregulator-evm_3v3 {
+		/* TPS22965DSG */
 		compatible = "regulator-fixed";
 		regulator-name = "evm_3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+		regulator-boot-on;
 	};
 
 	aic_dvdd: fixedregulator-aic_dvdd {
 		/* TPS77018DBVT */
 		compatible = "regulator-fixed";
 		regulator-name = "aic_dvdd";
-		vin-supply = <&evm_3v3>;
+		vin-supply = <&evm_3v3_sw>;
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
@@ -39,6 +77,7 @@
 		regulator-name = "evm_3v3_sd";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_3v3_sw>;
 		enable-active-high;
 		gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
 	};
@@ -69,9 +108,6 @@
 	tpd12s015: encoder {
 		compatible = "ti,tpd12s015";
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&tpd12s015_pins>;
-
 		gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>,	/* P4, CT CP HPD */
 			<&pcf_hdmi 5 GPIO_ACTIVE_HIGH>,	/* P5, LS OE */
 			<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
@@ -134,72 +170,6 @@
 };
 
 &dra7_pmx_core {
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
-			DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
-		>;
-	};
-
-	i2c5_pins: pinmux_i2c5_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
-			DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
-		>;
-	};
-
-	i2c5_pins: pinmux_i2c5_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
-			DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
-		>;
-	};
-
-	nand_default: nand_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT  | MUX_MODE0) /* gpmc_ad0 */
-			DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT  | MUX_MODE0) /* gpmc_ad1 */
-			DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT  | MUX_MODE0) /* gpmc_ad2 */
-			DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT  | MUX_MODE0) /* gpmc_ad3 */
-			DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT  | MUX_MODE0) /* gpmc_ad4 */
-			DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT  | MUX_MODE0) /* gpmc_ad5 */
-			DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT  | MUX_MODE0) /* gpmc_ad6 */
-			DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT  | MUX_MODE0) /* gpmc_ad7 */
-			DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT  | MUX_MODE0) /* gpmc_ad8 */
-			DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT  | MUX_MODE0) /* gpmc_ad9 */
-			DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT  | MUX_MODE0) /* gpmc_ad10 */
-			DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT  | MUX_MODE0) /* gpmc_ad11 */
-			DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT  | MUX_MODE0) /* gpmc_ad12 */
-			DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT  | MUX_MODE0) /* gpmc_ad13 */
-			DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT  | MUX_MODE0) /* gpmc_ad14 */
-			DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT  | MUX_MODE0) /* gpmc_ad15 */
-			DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */
-			DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
-			DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
-			DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
-			DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */
-			DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT  | MUX_MODE0) /* gpmc_wait0 */
-		>;
-	};
-
-	usb1_pins: pinmux_usb1_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
-		>;
-	};
-
-	usb2_pins: pinmux_usb2_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
-		>;
-	};
-
-	tps65917_pins_default: tps65917_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
-		>;
-	};
-
 	mmc1_pins_default: mmc1_pins_default {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
@@ -240,161 +210,12 @@
 			DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP)	/* wakeup0.off */
 		>;
 	};
-
-	hdmi_pins: pinmux_hdmi_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
-			DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
-		>;
-	};
-
-	tpd12s015_pins: pinmux_tpd12s015_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
-		>;
-	};
-
-	atl_pins: pinmux_atl_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5)	/* xref_clk1.atl_clk1 */
-			DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5)	/* xref_clk2.atl_clk2 */
-		>;
-	};
-
-	mcasp3_pins: pinmux_mcasp3_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_aclkx */
-			DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_fsx */
-			DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr0 */
-			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr1 */
-		>;
-	};
-
-	mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT_PULLDOWN | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE15)
-		>;
-	};
 };
 
 &i2c1 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <400000>;
 
-	tps65917: tps65917@58 {
-		compatible = "ti,tps65917";
-		reg = <0x58>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tps65917_pins_default>;
-
-		interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>;  /* IRQ_SYS_1N */
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		ti,system-power-controller;
-
-		tps65917_pmic {
-			compatible = "ti,tps65917-pmic";
-
-			tps65917_regulators: regulators {
-				smps1_reg: smps1 {
-					/* VDD_MPU */
-					regulator-name = "smps1";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps2_reg: smps2 {
-					/* VDD_CORE */
-					regulator-name = "smps2";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1150000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				smps3_reg: smps3 {
-					/* VDD_GPU IVA DSPEVE */
-					regulator-name = "smps3";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				smps4_reg: smps4 {
-					/* VDDS1V8 */
-					regulator-name = "smps4";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps5_reg: smps5 {
-					/* VDD_DDR */
-					regulator-name = "smps5";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo1_reg: ldo1 {
-					/* LDO1_OUT --> SDIO  */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-					regulator-allow-bypass;
-				};
-
-				ldo3_reg: ldo3 {
-					/* VDDA_1V8_PHY */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo5_reg: ldo5 {
-					/* VDDA_1V8_PLL */
-					regulator-name = "ldo5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo4_reg: ldo4 {
-					/* VDDA_3V_USB: VDDA_USBHS33 */
-					regulator-name = "ldo4";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-				};
-			};
-		};
-
-		tps65917_power_button {
-			compatible = "ti,palmas-pwrbutton";
-			interrupt-parent = <&tps65917>;
-			interrupts = <1 IRQ_TYPE_NONE>;
-			wakeup-source;
-			ti,palmas-long-press-seconds = <6>;
-		};
-	};
-
 	pcf_gpio_21: gpio@21 {
 		compatible = "ti,pcf8575", "nxp,pcf8575";
 		reg = <0x21>;
@@ -414,17 +235,15 @@
 		status = "okay";
 
 		/* Regulators */
-		AVDD-supply = <&evm_3v3>;
-		IOVDD-supply = <&evm_3v3>;
-		DRVDD-supply = <&evm_3v3>;
+		AVDD-supply = <&evm_3v3_sw>;
+		IOVDD-supply = <&evm_3v3_sw>;
+		DRVDD-supply = <&evm_3v3_sw>;
 		DVDD-supply = <&aic_dvdd>;
 	};
 };
 
 &i2c5 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c5_pins>;
 	clock-frequency = <400000>;
 
 	pcf_hdmi: pcf8575@26 {
@@ -462,8 +281,6 @@
 
 &gpmc {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_default>;
 	ranges = <0 0 0x08000000 0x01000000>;	/* minimum GPMC partition = 16MB */
 	nand@0,0 {
 		/* To use NAND, DIP switch SW5 must be set like so:
@@ -548,14 +365,6 @@
 	};
 };
 
-&usb2_phy1 {
-	phy-supply = <&ldo4_reg>;
-};
-
-&usb2_phy2 {
-	phy-supply = <&ldo4_reg>;
-};
-
 &omap_dwc3_1 {
 	extcon = <&extcon_usb1>;
 };
@@ -566,14 +375,10 @@
 
 &usb1 {
 	dr_mode = "peripheral";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins>;
 };
 
 &usb2 {
 	dr_mode = "host";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb2_pins>;
 };
 
 &mmc1 {
@@ -581,7 +386,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins_default>;
 	vmmc-supply = <&evm_3v3_sd>;
-	vmmc_aux-supply = <&ldo1_reg>;
 	bus-width = <4>;
 	/*
 	 * SDCD signal is not being used here - using the fact that GPIO mode
@@ -597,77 +401,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins_default>;
 
-	vmmc-supply = <&evm_3v3>;
+	vmmc-supply = <&evm_3v3_sw>;
 	bus-width = <8>;
 	ti,non-removable;
 	max-frequency = <192000000>;
 };
 
-&dra7_pmx_core {
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 2 */
-			DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_txc */
-			DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
-			DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
-			DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
-			DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
-			DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
-			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3)	/* vin2a_d18.rgmii1_rclk */
-			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3)	/* vin2a_d19.rgmii1_rctl */
-			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3)	/* vin2a_d20.rgmii1_rd3 */
-			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3)	/* vin2a_d21.rgmii1_rd2 */
-			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3)	/* vin2a_d22.rgmii1_rd1 */
-			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3)	/* vin2a_d23.rgmii1_rd0 */
-		>;
-
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 2 */
-			DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_d.mdio_d */
-			DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15)
-		>;
-	};
-};
-
 &mac {
 	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
 };
 
 &dcan1 {
@@ -681,10 +422,10 @@
 &qspi {
 	status = "okay";
 
-	spi-max-frequency = <64000000>;
+	spi-max-frequency = <76800000>;
 	m25p80@0 {
 		compatible = "s25fl256s1";
-		spi-max-frequency = <64000000>;
+		spi-max-frequency = <76800000>;
 		reg = <0>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
@@ -741,16 +482,11 @@
 
 &dss {
 	status = "ok";
-
-	vdda_video-supply = <&ldo5_reg>;
 };
 
 &hdmi {
 	status = "ok";
 
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_pins>;
-
 	port {
 		hdmi_out: endpoint {
 			remote-endpoint = <&tpd12s015_in>;
@@ -759,9 +495,6 @@
 };
 
 &atl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&atl_pins>;
-
 	assigned-clocks = <&abe_dpll_sys_clk_mux>,
 			  <&atl_gfclk_mux>,
 			  <&dpll_abe_ck>,
@@ -780,9 +513,6 @@
 
 &mcasp3 {
 	#sound-dai-cells = <0>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&mcasp3_pins>;
-	pinctrl-1 = <&mcasp3_sleep_pins>;
 
 	assigned-clocks = <&mcasp3_ahclkx_mux>;
 	assigned-clock-parents = <&atl_clkin2_ck>;
diff --git a/src/arm/dra72-evm-revc.dts b/src/arm/dra72-evm-revc.dts
index f9cfd3bb4dc2..3f808a47df03 100644
--- a/src/arm/dra72-evm-revc.dts
+++ b/src/arm/dra72-evm-revc.dts
@@ -11,23 +11,28 @@
 / {
 	model = "TI DRA722 Rev C EVM";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
 	};
 };
 
-&tps65917_regulators {
-	ldo2_reg: ldo2 {
-		/* LDO2_OUT --> VDDA_1V8_PHY2 */
-		regulator-name = "ldo2";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		regulator-boot-on;
+&i2c1 {
+	tps65917: tps65917@58 {
+		reg = <0x58>;
+
+		interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>;  /* IRQ_SYS_1N */
 	};
 };
 
+#include "dra72-evm-tps65917.dtsi"
+
+&ldo2_reg {
+	/* LDO2_OUT --> VDDA_1V8_PHY2 */
+	regulator-always-on;
+	regulator-boot-on;
+};
+
 &hdmi {
 	vdda-supply = <&ldo2_reg>;
 };
@@ -59,15 +64,17 @@
 &davinci_mdio {
 	dp83867_0: ethernet-phy@2 {
 		reg = <2>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
-		ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_NS>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
 	};
 
 	dp83867_1: ethernet-phy@3 {
 		reg = <3>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
-		ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_NS>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
 	};
 };
diff --git a/src/arm/dra72-evm-tps65917.dtsi b/src/arm/dra72-evm-tps65917.dtsi
new file mode 100644
index 000000000000..e6df676886c0
--- /dev/null
+++ b/src/arm/dra72-evm-tps65917.dtsi
@@ -0,0 +1,150 @@
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65917-q1.pdf
+ */
+
+&tps65917 {
+	compatible = "ti,tps65917";
+
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	ti,system-power-controller;
+
+	tps65917_pmic {
+		compatible = "ti,tps65917-pmic";
+
+		smps1-in-supply = <&vsys_3v3>;
+		smps2-in-supply = <&vsys_3v3>;
+		smps3-in-supply = <&vsys_3v3>;
+		smps4-in-supply = <&vsys_3v3>;
+		smps5-in-supply = <&vsys_3v3>;
+		ldo1-in-supply = <&vsys_3v3>;
+		ldo2-in-supply = <&vsys_3v3>;
+		ldo3-in-supply = <&vsys_3v3>;
+		ldo4-in-supply = <&evm_5v0>;
+		ldo5-in-supply = <&vsys_3v3>;
+
+		tps65917_regulators: regulators {
+			smps1_reg: smps1 {
+				/* VDD_MPU */
+				regulator-name = "smps1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			smps2_reg: smps2 {
+				/* VDD_CORE */
+				regulator-name = "smps2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			smps3_reg: smps3 {
+				/* VDD_GPU IVA DSPEVE */
+				regulator-name = "smps3";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			smps4_reg: smps4 {
+				/* VDDS1V8 */
+				regulator-name = "smps4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			smps5_reg: smps5 {
+				/* VDD_DDR */
+				regulator-name = "smps5";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				/* LDO1_OUT --> SDIO  */
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-allow-bypass;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allow-bypass;
+			};
+
+			ldo3_reg: ldo3 {
+				/* VDDA_1V8_PHY */
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5_reg: ldo5 {
+				/* VDDA_1V8_PLL */
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: ldo4 {
+				/* VDDA_3V_USB: VDDA_USBHS33 */
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	tps65917_power_button {
+		compatible = "ti,palmas-pwrbutton";
+		interrupt-parent = <&tps65917>;
+		interrupts = <1 IRQ_TYPE_NONE>;
+		wakeup-source;
+		ti,palmas-long-press-seconds = <6>;
+	};
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldo4_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldo4_reg>;
+};
+
+&dss {
+	vdda_video-supply = <&ldo5_reg>;
+};
+
+&mmc1 {
+	vmmc_aux-supply = <&ldo1_reg>;
+};
diff --git a/src/arm/dra72-evm.dts b/src/arm/dra72-evm.dts
index cc1d32ca4a8a..cd9c4ff12654 100644
--- a/src/arm/dra72-evm.dts
+++ b/src/arm/dra72-evm.dts
@@ -9,22 +9,22 @@
 / {
 	model = "TI DRA722";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
 	};
 };
 
-&tps65917_regulators {
-	ldo2_reg: ldo2 {
-		/* LDO2_OUT --> TP1017 (UNUSED)  */
-		regulator-name = "ldo2";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-allow-bypass;
+&i2c1 {
+	tps65917: tps65917@58 {
+		reg = <0x58>;
+
+		interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>;  /* IRQ_SYS_1N */
 	};
 };
 
+#include "dra72-evm-tps65917.dtsi"
+
 &hdmi {
 	vdda-supply = <&ldo3_reg>;
 };
diff --git a/src/arm/dra72x.dtsi b/src/arm/dra72x.dtsi
index 70a217050a4c..67107605fb4c 100644
--- a/src/arm/dra72x.dtsi
+++ b/src/arm/dra72x.dtsi
@@ -12,22 +12,6 @@
 / {
 	compatible = "ti,dra722", "ti,dra72", "ti,dra7";
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-
-			/* cooling options */
-			cooling-min-level = <0>;
-			cooling-max-level = <2>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-
 	pmu {
 		compatible = "arm,cortex-a15-pmu";
 		interrupt-parent = <&wakeupgen>;
diff --git a/src/arm/dra74x.dtsi b/src/arm/dra74x.dtsi
index 5e06020f450b..0a78347e6615 100644
--- a/src/arm/dra74x.dtsi
+++ b/src/arm/dra74x.dtsi
@@ -13,30 +13,6 @@
 	compatible = "ti,dra742", "ti,dra74", "ti,dra7";
 
 	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-
-			operating-points = <
-				/* kHz    uV */
-				1000000	1060000
-				1176000	1160000
-				>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-
-			/* cooling options */
-			cooling-min-level = <0>;
-			cooling-max-level = <2>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
diff --git a/src/arm/dra7xx-clocks.dtsi b/src/arm/dra7xx-clocks.dtsi
index 8378b44ee567..3330738e4c6e 100644
--- a/src/arm/dra7xx-clocks.dtsi
+++ b/src/arm/dra7xx-clocks.dtsi
@@ -1003,6 +1003,14 @@
 		ti,index-power-of-two;
 	};
 
+	gmac_main_clk: gmac_main_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&gmac_250m_dclk_div>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
 	l3init_480m_dclk_div: l3init_480m_dclk_div@1ac {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
@@ -1718,13 +1726,12 @@
 		reg = <0x0c00>;
 	};
 
-	gmac_gmii_ref_clk_div: gmac_gmii_ref_clk_div@13d0 {
+	rmii_50mhz_clk_mux: rmii_50mhz_clk_mux@13d0 {
 		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_m2_ck>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_gmac_h11x2_ck>, <&rmii_clk_ck>;
 		ti,bit-shift = <24>;
 		reg = <0x13d0>;
-		ti,dividers = <2>;
 	};
 
 	gmac_rft_clk_mux: gmac_rft_clk_mux@13d0 {
diff --git a/src/arm/efm32gg-dk3750.dts b/src/arm/efm32gg-dk3750.dts
index 504cf45d3cb8..98fc667d22c7 100644
--- a/src/arm/efm32gg-dk3750.dts
+++ b/src/arm/efm32gg-dk3750.dts
@@ -16,7 +16,8 @@
 		bootargs = "console=ttyefm4,115200 init=/linuxrc ignore_loglevel ihash_entries=64 dhash_entries=64 earlyprintk uclinux.physaddr=0x8c400000 root=/dev/mtdblock0";
 	};
 
-	memory {
+	memory@88000000 {
+		device_type = "memory";
 		reg = <0x88000000 0x400000>;
 	};
 
@@ -74,7 +75,7 @@
 			status = "ok";
 		};
 
-		boardfpga: boardfpga {
+		boardfpga: boardfpga@80000000 {
 			compatible = "efm32board";
 			reg = <0x80000000 0x400>;
 			irq-gpios = <&gpio 64 1>;
diff --git a/src/arm/efm32gg.dtsi b/src/arm/efm32gg.dtsi
index c747983771c7..b78c57e51ed5 100644
--- a/src/arm/efm32gg.dtsi
+++ b/src/arm/efm32gg.dtsi
@@ -4,10 +4,14 @@
  * Documentation available from
  * http://www.silabs.com/Support%20Documents/TechnicalDocs/EFM32GG-RM.pdf
  */
+
 #include "armv7-m.dtsi"
 #include "dt-bindings/clock/efm32-cmu.h"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
diff --git a/src/arm/emev2-kzm9d.dts b/src/arm/emev2-kzm9d.dts
index a35b851e1cd7..60d0a732833a 100644
--- a/src/arm/emev2-kzm9d.dts
+++ b/src/arm/emev2-kzm9d.dts
@@ -18,14 +18,18 @@
 	model = "EMEV2 KZM9D Board";
 	compatible = "renesas,kzm9d", "renesas,emev2";
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x8000000>;
 	};
 
+	aliases {
+		serial1 = &uart1;
+	};
+
 	chosen {
-		bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp";
-		stdout-path = &uart1;
+		bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp";
+		stdout-path = "serial1:115200n8";
 	};
 
 	gpio_keys {
@@ -33,28 +37,28 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		button@1 {
+		one {
 			debounce_interval = <50>;
 			wakeup-source;
 			label = "DSW2-1";
 			linux,code = <KEY_1>;
 			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
 		};
-		button@2 {
+		two {
 			debounce_interval = <50>;
 			wakeup-source;
 			label = "DSW2-2";
 			linux,code = <KEY_2>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
-		button@3 {
+		three {
 			debounce_interval = <50>;
 			wakeup-source;
 			label = "DSW2-3";
 			linux,code = <KEY_3>;
 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 		};
-		button@4 {
+		four {
 			debounce_interval = <50>;
 			wakeup-source;
 			label = "DSW2-4";
@@ -63,7 +67,7 @@
 		};
 	};
 
-	reg_1p8v: regulator@0 {
+	reg_1p8v: regulator-1p8v {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-1.8V";
 		regulator-min-microvolt = <1800000>;
@@ -72,7 +76,7 @@
 		regulator-boot-on;
 	};
 
-	reg_3p3v: regulator@1 {
+	reg_3p3v: regulator-3p3v {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -104,7 +108,7 @@
 };
 
 &pfc {
-	uart1_pins: serial@e1030000 {
+	uart1_pins: uart1 {
 		groups = "uart1_ctrl", "uart1_data";
 		function = "uart1";
 	};
diff --git a/src/arm/emev2.dtsi b/src/arm/emev2.dtsi
index bcce6f50c93d..0124faf175c8 100644
--- a/src/arm/emev2.dtsi
+++ b/src/arm/emev2.dtsi
@@ -8,13 +8,14 @@
  * kind, whether express or implied.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	compatible = "renesas,emev2";
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		gpio0 = &gpio0;
@@ -69,25 +70,25 @@
 			clock-frequency = <32768>;
 			#clock-cells = <0>;
 		};
-		iic0_sclkdiv: iic0_sclkdiv {
+		iic0_sclkdiv: iic0_sclkdiv@624,0 {
 			compatible = "renesas,emev2-smu-clkdiv";
 			reg = <0x624 0>;
 			clocks = <&pll3_fo>;
 			#clock-cells = <0>;
 		};
-		iic0_sclk: iic0_sclk {
+		iic0_sclk: iic0_sclk@48c,1 {
 			compatible = "renesas,emev2-smu-gclk";
 			reg = <0x48c 1>;
 			clocks = <&iic0_sclkdiv>;
 			#clock-cells = <0>;
 		};
-		iic1_sclkdiv: iic1_sclkdiv {
+		iic1_sclkdiv: iic1_sclkdiv@624,16 {
 			compatible = "renesas,emev2-smu-clkdiv";
 			reg = <0x624 16>;
 			clocks = <&pll3_fo>;
 			#clock-cells = <0>;
 		};
-		iic1_sclk: iic1_sclk {
+		iic1_sclk: iic1_sclk@490,1 {
 			compatible = "renesas,emev2-smu-gclk";
 			reg = <0x490 1>;
 			clocks = <&iic1_sclkdiv>;
@@ -100,55 +101,55 @@
 			clock-mult = <7000>;
 			#clock-cells = <0>;
 		};
-		usia_u0_sclkdiv: usia_u0_sclkdiv {
+		usia_u0_sclkdiv: usia_u0_sclkdiv@610,0 {
 			compatible = "renesas,emev2-smu-clkdiv";
 			reg = <0x610 0>;
 			clocks = <&pll3_fo>;
 			#clock-cells = <0>;
 		};
-		usib_u1_sclkdiv: usib_u1_sclkdiv {
+		usib_u1_sclkdiv: usib_u1_sclkdiv@65c,0 {
 			compatible = "renesas,emev2-smu-clkdiv";
 			reg = <0x65c 0>;
 			clocks = <&pll3_fo>;
 			#clock-cells = <0>;
 		};
-		usib_u2_sclkdiv: usib_u2_sclkdiv {
+		usib_u2_sclkdiv: usib_u2_sclkdiv@65c,16 {
 			compatible = "renesas,emev2-smu-clkdiv";
 			reg = <0x65c 16>;
 			clocks = <&pll3_fo>;
 			#clock-cells = <0>;
 		};
-		usib_u3_sclkdiv: usib_u3_sclkdiv {
+		usib_u3_sclkdiv: usib_u3_sclkdiv@660,0 {
 			compatible = "renesas,emev2-smu-clkdiv";
 			reg = <0x660 0>;
 			clocks = <&pll3_fo>;
 			#clock-cells = <0>;
 		};
-		usia_u0_sclk: usia_u0_sclk {
+		usia_u0_sclk: usia_u0_sclk@4a0,1 {
 			compatible = "renesas,emev2-smu-gclk";
 			reg = <0x4a0 1>;
 			clocks = <&usia_u0_sclkdiv>;
 			#clock-cells = <0>;
 		};
-		usib_u1_sclk: usib_u1_sclk {
+		usib_u1_sclk: usib_u1_sclk@4b8,1 {
 			compatible = "renesas,emev2-smu-gclk";
 			reg = <0x4b8 1>;
 			clocks = <&usib_u1_sclkdiv>;
 			#clock-cells = <0>;
 		};
-		usib_u2_sclk: usib_u2_sclk {
+		usib_u2_sclk: usib_u2_sclk@4bc,1 {
 			compatible = "renesas,emev2-smu-gclk";
 			reg = <0x4bc 1>;
 			clocks = <&usib_u2_sclkdiv>;
 			#clock-cells = <0>;
 		};
-		usib_u3_sclk: usib_u3_sclk {
+		usib_u3_sclk: usib_u3_sclk@4c0,1 {
 			compatible = "renesas,emev2-smu-gclk";
 			reg = <0x4c0 1>;
 			clocks = <&usib_u3_sclkdiv>;
 			#clock-cells = <0>;
 		};
-		sti_sclk: sti_sclk {
+		sti_sclk: sti_sclk@528,1 {
 			compatible = "renesas,emev2-smu-gclk";
 			reg = <0x528 1>;
 			clocks = <&c32ki>;
diff --git a/src/arm/ep7209.dtsi b/src/arm/ep7209.dtsi
new file mode 100644
index 000000000000..aaf1261d2ee4
--- /dev/null
+++ b/src/arm/ep7209.dtsi
@@ -0,0 +1,191 @@
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ */
+
+/dts-v1/;
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/clock/clps711x-clock.h>
+
+/ {
+	model = "Cirrus Logic EP7209";
+	compatible = "cirrus,ep7209";
+
+	aliases {
+		gpio0 = &porta;
+		gpio1 = &portb;
+		gpio3 = &portd;
+		gpio4 = &porte;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		spi0 = &spi;
+		timer0 = &timer1;
+		timer1 = &timer2;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			device_type = "cpu";
+			compatible = "arm,arm720t";
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		clks: clks@80000000 {
+			#clock-cells = <1>;
+			compatible = "cirrus,ep7209-clk";
+			reg = <0x80000000 0xc000>;
+			startup-frequency = <73728000>;
+		};
+
+		intc: intc@80000000 {
+			compatible = "cirrus,ep7209-intc";
+			reg = <0x80000000 0x4000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		porta: gpio@80000000 {
+			compatible = "cirrus,ep7209-gpio";
+			reg = <0x80000000 0x1 0x80000040 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		portb: gpio@80000001 {
+			compatible = "cirrus,ep7209-gpio";
+			reg = <0x80000001 0x1 0x80000041 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		portd: gpio@80000003 {
+			compatible = "cirrus,ep7209-gpio";
+			reg = <0x80000003 0x1 0x80000043 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		porte: gpio@80000083 {
+			compatible = "cirrus,ep7209-gpio";
+			reg = <0x80000083 0x1 0x800000c3 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		syscon1: syscon@80000100 {
+			compatible = "cirrus,ep7209-syscon1", "syscon";
+			reg = <0x80000100 0x80>;
+		};
+
+		bus: bus@80000180 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			compatible = "cirrus,ep7209-bus", "simple-bus";
+			clocks = <&clks CLPS711X_CLK_BUS>;
+			reg = <0x80000180 0x80>;
+			ranges = <
+				0 0 0x00000000 0x10000000
+				1 0 0x10000000 0x10000000
+				2 0 0x20000000 0x10000000
+				3 0 0x30000000 0x10000000
+				4 0 0x40000000 0x10000000
+				5 0 0x50000000 0x10000000
+				6 0 0x60000000 0x0000c000
+				7 0 0x70000000 0x00000080
+			>;
+		};
+
+		fb: fb@800002c0 {
+			compatible = "cirrus,ep7209-fb";
+			reg = <0x800002c0 0xd44>, <0x60000000 0xc000>;
+			clocks = <&clks CLPS711X_CLK_BUS>;
+			status = "disabled";
+		};
+
+		timer1: timer@80000300 {
+			compatible = "cirrus,ep7209-timer";
+			reg = <0x80000300 0x4>;
+			clocks = <&clks CLPS711X_CLK_TIMER1>;
+			interrupts = <8>;
+		};
+
+		timer2: timer@80000340 {
+			compatible = "cirrus,ep7209-timer";
+			reg = <0x80000340 0x4>;
+			clocks = <&clks CLPS711X_CLK_TIMER2>;
+			interrupts = <9>;
+		};
+
+		pwm: pwm@80000400 {
+			compatible = "cirrus,ep7209-pwm";
+			reg = <0x80000400 0x4>;
+			clocks = <&clks CLPS711X_CLK_PWM>;
+			#pwm-cells = <1>;
+		};
+
+		uart1: uart@80000480 {
+			compatible = "cirrus,ep7209-uart";
+			reg = <0x80000480 0x80>;
+			interrupts = <12 13>;
+			clocks = <&clks CLPS711X_CLK_UART>;
+			syscon = <&syscon1>;
+		};
+
+		spi: spi@80000500 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "cirrus,ep7209-spi";
+			reg = <0x80000500 0x4>;
+			interrupts = <15>;
+			clocks = <&clks CLPS711X_CLK_SPI>;
+			status = "disabled";
+		};
+
+		syscon2: syscon@80001100 {
+			compatible = "cirrus,ep7209-syscon2", "syscon";
+			reg = <0x80001100 0x80>;
+		};
+
+		uart2: uart@80001480 {
+			compatible = "cirrus,ep7209-uart";
+			reg = <0x80001480 0x80>;
+			interrupts = <28 29>;
+			clocks = <&clks CLPS711X_CLK_UART>;
+			syscon = <&syscon2>;
+		};
+
+		dai: dai@80002000 {
+			#sound-dai-cells = <0>;
+			compatible = "cirrus,ep7209-dai";
+			reg = <0x80002000 0x604>;
+			clocks = <&clks CLPS711X_CLK_PLL>;
+			clock-names = "pll";
+			interrupts = <32>;
+			status = "disabled";
+		};
+
+		syscon3: syscon@80002200 {
+			compatible = "cirrus,ep7209-syscon3", "syscon";
+			reg = <0x80002200 0x40>;
+		};
+	};
+
+	mctrl: mctrl {
+		compatible = "cirrus,ep7209-mctrl-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
diff --git a/src/arm/ep7211-edb7211.dts b/src/arm/ep7211-edb7211.dts
new file mode 100644
index 000000000000..9a134ed271eb
--- /dev/null
+++ b/src/arm/ep7211-edb7211.dts
@@ -0,0 +1,100 @@
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ */
+
+#include "ep7211.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Cirrus Logic EP7211 Development Board";
+	compatible = "cirrus,edb7211", "cirrus,ep7211", "cirrus,ep7209";
+
+	memory {
+		reg = <0xc0000000 0x02000000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0>;
+		brightness-levels = <
+			0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7
+			0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf
+		>;
+		default-brightness-level = <0x0>;
+		power-supply = <&blen>;
+	};
+
+	display: display {
+		model = "320x240x4";
+		native-mode = <&timing0>;
+		bits-per-pixel = <4>;
+		ac-prescale = <17>;
+
+		display-timings {
+			timing0: 320x240 {
+				hactive = <320>;
+				hback-porch = <0>;
+				hfront-porch = <0>;
+				hsync-len = <0>;
+				vactive = <240>;
+				vback-porch = <0>;
+				vfront-porch = <0>;
+				vsync-len = <0>;
+				clock-frequency = <6500000>;
+			};
+		};
+	};
+
+	i2c: i2c {
+		compatible = "i2c-gpio";
+		gpios = <&portd 4 GPIO_ACTIVE_HIGH>,
+			<&portd 5 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <2>;
+		i2c-gpio,scl-output-only;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	lcddc: lcddc {
+		compatible = "regulator-fixed";
+		regulator-name = "BACKLIGHT ENABLE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&portd 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	blen: blen {
+		compatible = "regulator-fixed";
+		regulator-name = "BACKLIGHT ENABLE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&portd 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&bus {
+	flash: nor@00000000 {
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x02000000>;
+		bank-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&fb {
+	display = <&display>;
+	lcd-supply = <&lcddc>;
+	status = "okay";
+};
+
+&portd {
+	lcden {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LCD ENABLE";
+	};
+};
diff --git a/src/arm/ep7211.dtsi b/src/arm/ep7211.dtsi
new file mode 100644
index 000000000000..e438f6db0673
--- /dev/null
+++ b/src/arm/ep7211.dtsi
@@ -0,0 +1,12 @@
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ */
+
+#include "ep7209.dtsi"
+
+/ {
+	model = "Cirrus Logic EP7211";
+	compatible = "cirrus,ep7211", "cirrus,ep7209";
+};
diff --git a/src/arm/ethernut5.dts b/src/arm/ethernut5.dts
index 243044343ee8..4687229a3ab9 100644
--- a/src/arm/ethernut5.dts
+++ b/src/arm/ethernut5.dts
@@ -77,13 +77,13 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 
 		pcf8563@50 {
diff --git a/src/arm/evk-pro3.dts b/src/arm/evk-pro3.dts
index f72969efe6d7..20a4481b6e12 100644
--- a/src/arm/evk-pro3.dts
+++ b/src/arm/evk-pro3.dts
@@ -46,13 +46,13 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 
diff --git a/src/arm/exynos-mfc-reserved-memory.dtsi b/src/arm/exynos-mfc-reserved-memory.dtsi
new file mode 100644
index 000000000000..f78c14c82e17
--- /dev/null
+++ b/src/arm/exynos-mfc-reserved-memory.dtsi
@@ -0,0 +1,35 @@
+/*
+ * Samsung's Exynos SoC MFC (Video Codec) reserved memory common definition.
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region_mfc_left {
+			compatible = "shared-dma-pool";
+			no-map;
+			size = <0x1000000>;
+			alignment = <0x100000>;
+		};
+
+		mfc_right: region_mfc_right {
+			compatible = "shared-dma-pool";
+			no-map;
+			size = <0x800000>;
+			alignment = <0x100000>;
+		};
+	};
+};
+
+&mfc {
+	memory-region = <&mfc_left>, <&mfc_right>;
+};
diff --git a/src/arm/exynos3250-artik5-eval.dts b/src/arm/exynos3250-artik5-eval.dts
index be4d6aa379f3..4bd2ee87124e 100644
--- a/src/arm/exynos3250-artik5-eval.dts
+++ b/src/arm/exynos3250-artik5-eval.dts
@@ -28,7 +28,7 @@
 	vqmmc-supply = <&ldo3_reg>;
 	card-detect-delay = <200>;
 	clock-frequency = <100000000>;
-	clock-freq-min-max = <400000 100000000>;
+	max-frequency = <100000000>;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
diff --git a/src/arm/exynos3250-artik5.dtsi b/src/arm/exynos3250-artik5.dtsi
index 130e946f1414..59c89d7662a8 100644
--- a/src/arm/exynos3250-artik5.dtsi
+++ b/src/arm/exynos3250-artik5.dtsi
@@ -24,7 +24,8 @@
 		stdout-path = &serial_2;
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x1ff00000>;
 	};
 
@@ -309,7 +310,7 @@
 	card-detect-delay = <200>;
 	vmmc-supply = <&ldo12_reg>;
 	clock-frequency = <100000000>;
-	clock-freq-min-max = <400000 100000000>;
+	max-frequency = <100000000>;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
diff --git a/src/arm/exynos3250-monk.dts b/src/arm/exynos3250-monk.dts
index 8c8906266310..cccfe4b791d1 100644
--- a/src/arm/exynos3250-monk.dts
+++ b/src/arm/exynos3250-monk.dts
@@ -27,7 +27,8 @@
 		i2c7 = &i2c_max77836;
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg =  <0x40000000 0x1ff00000>;
 	};
 
@@ -434,7 +435,7 @@
 	card-detect-delay = <200>;
 	vmmc-supply = <&vemmc_reg>;
 	clock-frequency = <100000000>;
-	clock-freq-min-max = <400000 100000000>;
+	max-frequency = <100000000>;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
diff --git a/src/arm/exynos3250-pinctrl.dtsi b/src/arm/exynos3250-pinctrl.dtsi
index 40ea7de44933..a149f148e659 100644
--- a/src/arm/exynos3250-pinctrl.dtsi
+++ b/src/arm/exynos3250-pinctrl.dtsi
@@ -12,58 +12,46 @@
  * published by the Free Software Foundation.
 */
 
-#define PIN_PULL_NONE		0
-#define PIN_PULL_DOWN		1
-#define PIN_PULL_UP		3
-
-#define PIN_DRV_LV1		0
-#define PIN_DRV_LV2		2
-#define PIN_DRV_LV3		1
-#define PIN_DRV_LV4		3
-
-#define PIN_PDN_OUT0		0
-#define PIN_PDN_OUT1		1
-#define PIN_PDN_INPUT		2
-#define PIN_PDN_PREV		3
-
-#define PIN_IN(_pin, _pull, _drv)			\
-	_pin {						\
-		samsung,pins = #_pin;			\
-		samsung,pin-function = <0>;		\
-		samsung,pin-pud = <PIN_PULL_ ##_pull>;	\
-		samsung,pin-drv = <PIN_DRV_ ##_drv>;	\
+#include <dt-bindings/pinctrl/samsung.h>
+
+#define PIN_IN(_pin, _pull, _drv)					\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;		\
+		samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>;		\
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
 	}
 
-#define PIN_OUT(_pin, _drv)				\
-	_pin {						\
-		samsung,pins = #_pin;			\
-		samsung,pin-function = <1>;		\
-		samsung,pin-pud = <0>;			\
-		samsung,pin-drv = <PIN_DRV_ ##_drv>;	\
+#define PIN_OUT(_pin, _drv)						\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;	\
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;		\
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
 	}
 
-#define PIN_OUT_SET(_pin, _val, _drv)			\
-	_pin {						\
-		samsung,pins = #_pin;			\
-		samsung,pin-function = <1>;		\
-		samsung,pin-pud = <0>;			\
-		samsung,pin-drv = <PIN_DRV_ ##_drv>;	\
-		samsung,pin-val = <_val>;		\
+#define PIN_OUT_SET(_pin, _val, _drv)					\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;	\
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;		\
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
+		samsung,pin-val = <_val>;				\
 	}
 
-#define PIN_CFG(_pin, _sel, _pull, _drv)		\
-	_pin {						\
-		samsung,pins = #_pin;			\
-		samsung,pin-function = <_sel>;		\
-		samsung,pin-pud = <PIN_PULL_ ##_pull>;	\
-		samsung,pin-drv = <PIN_DRV_ ##_drv>;	\
+#define PIN_CFG(_pin, _sel, _pull, _drv)				\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-function = <_sel>;				\
+		samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>;		\
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
 	}
 
-#define PIN_SLP(_pin, _mode, _pull)				\
-	_pin {							\
-		samsung,pins = #_pin;				\
-		samsung,pin-con-pdn = <PIN_PDN_ ##_mode>;	\
-		samsung,pin-pud-pdn = <PIN_PULL_ ##_pull>;	\
+#define PIN_SLP(_pin, _mode, _pull)					\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>;	\
 	}
 
 &pinctrl_0 {
@@ -125,158 +113,158 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <0x2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c2_bus: i2c2-bus {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c3_bus: i2c3-bus {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c4_bus: i2c4-bus {
 		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi1_bus: spi1-bus {
 		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c5_bus: i2c5-bus {
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s2_bus: i2s2-bus {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pcm2_bus: pcm2-bus {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c6_bus: i2c6-bus {
 		samsung,pins = "gpc1-3", "gpc1-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm0_out: pwm0-out {
 		samsung,pins = "gpd0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm1_out: pwm1-out {
 		samsung,pins = "gpd0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c7_bus: i2c7-bus {
 		samsung,pins = "gpd0-2", "gpd0-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm2_out: pwm2-out {
 		samsung,pins = "gpd0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm3_out: pwm3-out {
 		samsung,pins = "gpd0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c0_bus: i2c0-bus {
 		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	mipi0_clk: mipi0-clk {
 		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c1_bus: i2c1-bus {
 		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -374,8 +362,14 @@
 
 		interrupt-controller;
 		interrupt-parent = <&gic>;
-		interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>,
-				<0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <2>;
 	};
 
@@ -385,8 +379,14 @@
 
 		interrupt-controller;
 		interrupt-parent = <&gic>;
-		interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>,
-				<0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <2>;
 	};
 
@@ -408,164 +408,164 @@
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpk0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpk0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_cd: sd0-cd {
 		samsung,pins = "gpk0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_rdqs: sd0-rdqs {
 		samsung,pins = "gpk0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus1: sd0-bus-width1 {
 		samsung,pins = "gpk0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus4: sd0-bus-width4 {
 		samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus8: sd0-bus-width8 {
 		samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_clk: sd1-clk {
 		samsung,pins = "gpk1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gpk1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_cd: sd1-cd {
 		samsung,pins = "gpk1-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
 		samsung,pins = "gpk1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
 		samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_clk: sd2-clk {
 		samsung,pins = "gpk2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpk2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cd: sd2-cd {
 		samsung,pins = "gpk2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus1: sd2-bus-width1 {
 		samsung,pins = "gpk2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus4: sd2-bus-width4 {
 		samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	cam_port_b_io: cam-port-b-io {
 		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
 				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
 				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_port_b_clk_active: cam-port-b-clk-active {
 		samsung,pins = "gpm2-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	cam_port_b_clk_idle: cam-port-b-clk-idle {
 		samsung,pins = "gpm2-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	fimc_is_i2c0: fimc-is-i2c0 {
 		samsung,pins = "gpm4-0", "gpm4-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	fimc_is_i2c1: fimc-is-i2c1 {
 		samsung,pins = "gpm4-2", "gpm4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	fimc_is_uart: fimc-is-uart {
 		samsung,pins = "gpm3-5", "gpm3-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
diff --git a/src/arm/exynos3250-rinato.dts b/src/arm/exynos3250-rinato.dts
index e422819591dc..548413e23c47 100644
--- a/src/arm/exynos3250-rinato.dts
+++ b/src/arm/exynos3250-rinato.dts
@@ -27,7 +27,8 @@
 		i2c7 = &i2c_max77836;
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg =  <0x40000000 0x1ff00000>;
 	};
 
@@ -632,10 +633,6 @@
 	status = "okay";
 };
 
-&mfc {
-	status = "okay";
-};
-
 &jpeg {
 	status = "okay";
 };
@@ -652,7 +649,7 @@
 	card-detect-delay = <200>;
 	vmmc-supply = <&ldo12_reg>;
 	clock-frequency = <100000000>;
-	clock-freq-min-max = <400000 100000000>;
+	max-frequency = <100000000>;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
diff --git a/src/arm/exynos3250.dtsi b/src/arm/exynos3250.dtsi
index 62f3dcd9e046..ba17ee1eb749 100644
--- a/src/arm/exynos3250.dtsi
+++ b/src/arm/exynos3250.dtsi
@@ -17,14 +17,17 @@
  * published by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
 #include "exynos4-cpu-thermal.dtsi"
 #include "exynos-syscon-restart.dtsi"
 #include <dt-bindings/clock/exynos3250.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	compatible = "samsung,exynos3250";
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		pinctrl0 = &pinctrl_0;
@@ -210,7 +213,8 @@
 		rtc: rtc@10070000 {
 			compatible = "samsung,s3c6410-rtc";
 			reg = <0x10070000 0x100>;
-			interrupts = <0 73 0>, <0 74 0>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-parent = <&pmu_system_controller>;
 			status = "disabled";
 		};
@@ -218,7 +222,7 @@
 		tmu: tmu@100C0000 {
 			compatible = "samsung,exynos3250-tmu";
 			reg = <0x100C0000 0x100>;
-			interrupts = <0 216 0>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_TMU_APBIF>;
 			clock-names = "tmu_apbif";
 			#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -233,14 +237,21 @@
 			      <0x10482000 0x1000>,
 			      <0x10484000 0x2000>,
 			      <0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
 		mct@10050000 {
 			compatible = "samsung,exynos4210-mct";
 			reg = <0x10050000 0x800>;
-			interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>,
-				     <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>;
+			interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
 			clock-names = "fin_pll", "mct";
 		};
@@ -248,24 +259,24 @@
 		pinctrl_1: pinctrl@11000000 {
 			compatible = "samsung,exynos3250-pinctrl";
 			reg = <0x11000000 0x1000>;
-			interrupts = <0 225 0>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 
 			wakeup-interrupt-controller {
 				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupts = <0 48 0>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
 		pinctrl_0: pinctrl@11400000 {
 			compatible = "samsung,exynos3250-pinctrl";
 			reg = <0x11400000 0x1000>;
-			interrupts = <0 240 0>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		jpeg: codec@11830000 {
 			compatible = "samsung,exynos3250-jpeg";
 			reg = <0x11830000 0x1000>;
-			interrupts = <0 171 0>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_JPEG>, <&cmu CLK_SCLK_JPEG>;
 			clock-names = "jpeg", "sclk";
 			power-domains = <&pd_cam>;
@@ -279,7 +290,8 @@
 		sysmmu_jpeg: sysmmu@11A60000 {
 			compatible = "samsung,exynos-sysmmu";
 			reg = <0x11a60000 0x1000>;
-			interrupts = <0 156 0>, <0 161 0>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "sysmmu", "master";
 			clocks = <&cmu CLK_SMMUJPEG>, <&cmu CLK_JPEG>;
 			power-domains = <&pd_cam>;
@@ -290,7 +302,9 @@
 			compatible = "samsung,exynos3250-fimd";
 			reg = <0x11c00000 0x30000>;
 			interrupt-names = "fifo", "vsync", "lcd_sys";
-			interrupts = <0 84 0>, <0 85 0>, <0 86 0>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
 			clock-names = "sclk_fimd", "fimd";
 			power-domains = <&pd_lcd0>;
@@ -302,7 +316,7 @@
 		dsi_0: dsi@11C80000 {
 			compatible = "samsung,exynos3250-mipi-dsi";
 			reg = <0x11C80000 0x10000>;
-			interrupts = <0 83 0>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			samsung,phy-type = <0>;
 			power-domains = <&pd_lcd0>;
 			phys = <&mipi_phy 1>;
@@ -317,7 +331,8 @@
 		sysmmu_fimd0: sysmmu@11E20000 {
 			compatible = "samsung,exynos-sysmmu";
 			reg = <0x11e20000 0x1000>;
-			interrupts = <0 80 0>, <0 81 0>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "sysmmu", "master";
 			clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>;
 			power-domains = <&pd_lcd0>;
@@ -327,7 +342,7 @@
 		hsotg: hsotg@12480000 {
 			compatible = "snps,dwc2";
 			reg = <0x12480000 0x20000>;
-			interrupts = <0 141 0>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_USBOTG>;
 			clock-names = "otg";
 			phys = <&exynos_usbphy 0>;
@@ -338,7 +353,7 @@
 		mshc_0: mshc@12510000 {
 			compatible = "samsung,exynos5420-dw-mshc";
 			reg = <0x12510000 0x1000>;
-			interrupts = <0 142 0>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
 			clock-names = "biu", "ciu";
 			fifo-depth = <0x80>;
@@ -350,7 +365,7 @@
 		mshc_1: mshc@12520000 {
 			compatible = "samsung,exynos5420-dw-mshc";
 			reg = <0x12520000 0x1000>;
-			interrupts = <0 143 0>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
 			clock-names = "biu", "ciu";
 			fifo-depth = <0x80>;
@@ -362,7 +377,7 @@
 		mshc_2: mshc@12530000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12530000 0x1000>;
-			interrupts = <0 144 0>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>;
 			clock-names = "biu", "ciu";
 			fifo-depth = <0x80>;
@@ -390,7 +405,7 @@
 			pdma0: pdma@12680000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x12680000 0x1000>;
-				interrupts = <0 138 0>;
+				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&cmu CLK_PDMA0>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -401,7 +416,7 @@
 			pdma1: pdma@12690000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x12690000 0x1000>;
-				interrupts = <0 139 0>;
+				interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&cmu CLK_PDMA1>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -414,7 +429,7 @@
 			compatible = "samsung,exynos3250-adc",
 				     "samsung,exynos-adc-v2";
 			reg = <0x126C0000 0x100>;
-			interrupts = <0 137 0>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "adc", "sclk";
 			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
 			#io-channel-cells = <1>;
@@ -426,18 +441,18 @@
 		mfc: codec@13400000 {
 			compatible = "samsung,mfc-v7";
 			reg = <0x13400000 0x10000>;
-			interrupts = <0 102 0>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "mfc", "sclk_mfc";
 			clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>;
 			power-domains = <&pd_mfc>;
 			iommus = <&sysmmu_mfc>;
-			status = "disabled";
 		};
 
 		sysmmu_mfc: sysmmu@13620000 {
 			compatible = "samsung,exynos-sysmmu";
 			reg = <0x13620000 0x1000>;
-			interrupts = <0 96 0>, <0 98 0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "sysmmu", "master";
 			clocks = <&cmu CLK_SMMUMFC_L>, <&cmu CLK_MFC>;
 			power-domains = <&pd_mfc>;
@@ -447,7 +462,7 @@
 		serial_0: serial@13800000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x13800000 0x100>;
-			interrupts = <0 109 0>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
 			clock-names = "uart", "clk_uart_baud0";
 			pinctrl-names = "default";
@@ -458,7 +473,7 @@
 		serial_1: serial@13810000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x13810000 0x100>;
-			interrupts = <0 110 0>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
 			clock-names = "uart", "clk_uart_baud0";
 			pinctrl-names = "default";
@@ -469,7 +484,7 @@
 		serial_2: serial@13820000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x13820000 0x100>;
-			interrupts = <0 111 0>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
 			clock-names = "uart", "clk_uart_baud0";
 			pinctrl-names = "default";
@@ -482,7 +497,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x13860000 0x100>;
-			interrupts = <0 113 0>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C0>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -495,7 +510,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x13870000 0x100>;
-			interrupts = <0 114 0>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C1>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -508,7 +523,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x13880000 0x100>;
-			interrupts = <0 115 0>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C2>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -521,7 +536,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x13890000 0x100>;
-			interrupts = <0 116 0>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C3>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -534,7 +549,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x138A0000 0x100>;
-			interrupts = <0 117 0>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C4>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -547,7 +562,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x138B0000 0x100>;
-			interrupts = <0 118 0>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C5>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -560,7 +575,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x138C0000 0x100>;
-			interrupts = <0 119 0>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C6>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -573,7 +588,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x138D0000 0x100>;
-			interrupts = <0 120 0>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C7>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -584,7 +599,7 @@
 		spi_0: spi@13920000 {
 			compatible = "samsung,exynos4210-spi";
 			reg = <0x13920000 0x100>;
-			interrupts = <0 121 0>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma0 7>, <&pdma0 6>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
@@ -600,7 +615,7 @@
 		spi_1: spi@13930000 {
 			compatible = "samsung,exynos4210-spi";
 			reg = <0x13930000 0x100>;
-			interrupts = <0 122 0>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma1 7>, <&pdma1 6>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
@@ -616,7 +631,7 @@
 		i2s2: i2s@13970000 {
 			compatible = "samsung,s3c6410-i2s";
 			reg = <0x13970000 0x100>;
-			interrupts = <0 126 0>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2S>, <&cmu CLK_SCLK_I2S>;
 			clock-names = "iis", "i2s_opclk0";
 			dmas = <&pdma0 14>, <&pdma0 13>;
@@ -629,15 +644,19 @@
 		pwm: pwm@139D0000 {
 			compatible = "samsung,exynos4210-pwm";
 			reg = <0x139D0000 0x1000>;
-			interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
-				     <0 107 0>, <0 108 0>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			#pwm-cells = <3>;
 			status = "disabled";
 		};
 
 		pmu {
 			compatible = "arm,cortex-a7-pmu";
-			interrupts = <0 18 0>, <0 19 0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		ppmu_dmc0: ppmu_dmc0@106a0000 {
diff --git a/src/arm/exynos4.dtsi b/src/arm/exynos4.dtsi
index ca8f3e3cf2f3..c64737baa45e 100644
--- a/src/arm/exynos4.dtsi
+++ b/src/arm/exynos4.dtsi
@@ -21,11 +21,14 @@
 
 #include <dt-bindings/clock/exynos4.h>
 #include <dt-bindings/clock/exynos-audss-clk.h>
-#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include "exynos-syscon-restart.dtsi"
 
 / {
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		spi0 = &spi_0;
@@ -77,6 +80,11 @@
 		reg = <0x10000000 0x100>;
 	};
 
+	scu: snoop-control-unit@10500000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x10500000 0x2000>;
+	};
+
 	memory-controller@12570000 {
 		compatible = "samsung,exynos4210-srom";
 		reg = <0x12570000 0x14>;
@@ -167,7 +175,7 @@
 	dsi_0: dsi@11C80000 {
 		compatible = "samsung,exynos4210-mipi-dsi";
 		reg = <0x11C80000 0x10000>;
-		interrupts = <0 79 0>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_lcd0>;
 		phys = <&mipi_phy 1>;
 		phy-names = "dsim";
@@ -190,7 +198,7 @@
 		fimc_0: fimc@11800000 {
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11800000 0x1000>;
-			interrupts = <0 84 0>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>;
 			clock-names = "fimc", "sclk_fimc";
 			power-domains = <&pd_cam>;
@@ -202,7 +210,7 @@
 		fimc_1: fimc@11810000 {
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11810000 0x1000>;
-			interrupts = <0 85 0>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>;
 			clock-names = "fimc", "sclk_fimc";
 			power-domains = <&pd_cam>;
@@ -214,7 +222,7 @@
 		fimc_2: fimc@11820000 {
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11820000 0x1000>;
-			interrupts = <0 86 0>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>;
 			clock-names = "fimc", "sclk_fimc";
 			power-domains = <&pd_cam>;
@@ -226,7 +234,7 @@
 		fimc_3: fimc@11830000 {
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11830000 0x1000>;
-			interrupts = <0 87 0>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>;
 			clock-names = "fimc", "sclk_fimc";
 			power-domains = <&pd_cam>;
@@ -238,7 +246,7 @@
 		csis_0: csis@11880000 {
 			compatible = "samsung,exynos4210-csis";
 			reg = <0x11880000 0x4000>;
-			interrupts = <0 78 0>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>;
 			clock-names = "csis", "sclk_csis";
 			bus-width = <4>;
@@ -253,7 +261,7 @@
 		csis_1: csis@11890000 {
 			compatible = "samsung,exynos4210-csis";
 			reg = <0x11890000 0x4000>;
-			interrupts = <0 80 0>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>;
 			clock-names = "csis", "sclk_csis";
 			bus-width = <2>;
@@ -269,7 +277,7 @@
 	watchdog: watchdog@10060000 {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x10060000 0x100>;
-		interrupts = <0 43 0>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_WDT>;
 		clock-names = "watchdog";
 		status = "disabled";
@@ -279,7 +287,8 @@
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x10070000 0x100>;
 		interrupt-parent = <&pmu_system_controller>;
-		interrupts = <0 44 0>, <0 45 0>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_RTC>;
 		clock-names = "rtc";
 		status = "disabled";
@@ -288,7 +297,7 @@
 	keypad: keypad@100A0000 {
 		compatible = "samsung,s5pv210-keypad";
 		reg = <0x100A0000 0x100>;
-		interrupts = <0 109 0>;
+		interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_KEYIF>;
 		clock-names = "keypad";
 		status = "disabled";
@@ -297,7 +306,7 @@
 	sdhci_0: sdhci@12510000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12510000 0x100>;
-		interrupts = <0 73 0>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
 		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
@@ -306,7 +315,7 @@
 	sdhci_1: sdhci@12520000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12520000 0x100>;
-		interrupts = <0 74 0>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
 		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
@@ -315,7 +324,7 @@
 	sdhci_2: sdhci@12530000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12530000 0x100>;
-		interrupts = <0 75 0>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
 		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
@@ -324,7 +333,7 @@
 	sdhci_3: sdhci@12540000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12540000 0x100>;
-		interrupts = <0 76 0>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
 		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
@@ -343,7 +352,7 @@
 	hsotg: hsotg@12480000 {
 		compatible = "samsung,s3c6400-hsotg";
 		reg = <0x12480000 0x20000>;
-		interrupts = <0 71 0>;
+		interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_USB_DEVICE>;
 		clock-names = "otg";
 		phys = <&exynos_usbphy 0>;
@@ -354,7 +363,7 @@
 	ehci: ehci@12580000 {
 		compatible = "samsung,exynos4210-ehci";
 		reg = <0x12580000 0x100>;
-		interrupts = <0 70 0>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_USB_HOST>;
 		clock-names = "usbhost";
 		status = "disabled";
@@ -380,7 +389,7 @@
 	ohci: ohci@12590000 {
 		compatible = "samsung,exynos4210-ohci";
 		reg = <0x12590000 0x100>;
-		interrupts = <0 70 0>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_USB_HOST>;
 		clock-names = "usbhost";
 		status = "disabled";
@@ -422,19 +431,18 @@
 	mfc: codec@13400000 {
 		compatible = "samsung,mfc-v5";
 		reg = <0x13400000 0x10000>;
-		interrupts = <0 94 0>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_mfc>;
 		clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
 		clock-names = "mfc", "sclk_mfc";
 		iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
 		iommu-names = "left", "right";
-		status = "disabled";
 	};
 
 	serial_0: serial@13800000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13800000 0x100>;
-		interrupts = <0 52 0>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
 		clock-names = "uart", "clk_uart_baud0";
 		dmas = <&pdma0 15>, <&pdma0 16>;
@@ -445,7 +453,7 @@
 	serial_1: serial@13810000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13810000 0x100>;
-		interrupts = <0 53 0>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
 		clock-names = "uart", "clk_uart_baud0";
 		dmas = <&pdma1 15>, <&pdma1 16>;
@@ -456,7 +464,7 @@
 	serial_2: serial@13820000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13820000 0x100>;
-		interrupts = <0 54 0>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
 		clock-names = "uart", "clk_uart_baud0";
 		dmas = <&pdma0 17>, <&pdma0 18>;
@@ -467,7 +475,7 @@
 	serial_3: serial@13830000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13830000 0x100>;
-		interrupts = <0 55 0>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
 		clock-names = "uart", "clk_uart_baud0";
 		dmas = <&pdma1 17>, <&pdma1 18>;
@@ -480,7 +488,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13860000 0x100>;
-		interrupts = <0 58 0>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C0>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
@@ -493,7 +501,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13870000 0x100>;
-		interrupts = <0 59 0>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C1>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
@@ -506,7 +514,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13880000 0x100>;
-		interrupts = <0 60 0>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C2>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
@@ -519,7 +527,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13890000 0x100>;
-		interrupts = <0 61 0>;
+		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C3>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
@@ -532,7 +540,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138A0000 0x100>;
-		interrupts = <0 62 0>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C4>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
@@ -545,7 +553,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138B0000 0x100>;
-		interrupts = <0 63 0>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C5>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
@@ -558,7 +566,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138C0000 0x100>;
-		interrupts = <0 64 0>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C6>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
@@ -571,7 +579,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138D0000 0x100>;
-		interrupts = <0 65 0>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C7>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
@@ -584,7 +592,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-hdmiphy-i2c";
 		reg = <0x138E0000 0x100>;
-		interrupts = <0 93 0>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C_HDMI>;
 		clock-names = "i2c";
 		status = "disabled";
@@ -598,7 +606,7 @@
 	spi_0: spi@13920000 {
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x13920000 0x100>;
-		interrupts = <0 66 0>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 		dmas = <&pdma0 7>, <&pdma0 6>;
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
@@ -613,7 +621,7 @@
 	spi_1: spi@13930000 {
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x13930000 0x100>;
-		interrupts = <0 67 0>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 		dmas = <&pdma1 7>, <&pdma1 6>;
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
@@ -628,7 +636,7 @@
 	spi_2: spi@13940000 {
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x13940000 0x100>;
-		interrupts = <0 68 0>;
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 		dmas = <&pdma0 9>, <&pdma0 8>;
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
@@ -643,7 +651,11 @@
 	pwm: pwm@139D0000 {
 		compatible = "samsung,exynos4210-pwm";
 		reg = <0x139D0000 0x1000>;
-		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_PWM>;
 		clock-names = "timers";
 		#pwm-cells = <3>;
@@ -660,7 +672,7 @@
 		pdma0: pdma@12680000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12680000 0x1000>;
-			interrupts = <0 35 0>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
@@ -671,7 +683,7 @@
 		pdma1: pdma@12690000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12690000 0x1000>;
-			interrupts = <0 36 0>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
@@ -682,7 +694,7 @@
 		mdma1: mdma@12850000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12850000 0x1000>;
-			interrupts = <0 34 0>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MDMA>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
@@ -712,7 +724,7 @@
 	jpeg_codec: jpeg-codec@11840000 {
 		compatible = "samsung,exynos4210-jpeg";
 		reg = <0x11840000 0x1000>;
-		interrupts = <0 88 0>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_JPEG>;
 		clock-names = "jpeg";
 		power-domains = <&pd_cam>;
@@ -722,7 +734,7 @@
 	rotator: rotator@12810000 {
 		compatible = "samsung,exynos4210-rotator";
 		reg = <0x12810000 0x64>;
-		interrupts = <0 83 0>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_ROTATOR>;
 		clock-names = "rotator";
 		iommus = <&sysmmu_rotator>;
@@ -731,7 +743,7 @@
 	hdmi: hdmi@12D00000 {
 		compatible = "samsung,exynos4210-hdmi";
 		reg = <0x12D00000 0x70000>;
-		interrupts = <0 92 0>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy",
 			"mout_hdmi";
 		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
@@ -746,7 +758,7 @@
 	hdmicec: cec@100B0000 {
 		compatible = "samsung,s5p-cec";
 		reg = <0x100B0000 0x200>;
-		interrupts = <0 114 0>;
+		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_HDMI_CEC>;
 		clock-names = "hdmicec";
 		samsung,syscon-phandle = <&pmu_system_controller>;
@@ -757,7 +769,7 @@
 
 	mixer: mixer@12C10000 {
 		compatible = "samsung,exynos4210-mixer";
-		interrupts = <0 91 0>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
 		power-domains = <&pd_tv>;
 		iommus = <&sysmmu_tv>;
@@ -984,7 +996,7 @@
 	sss: sss@10830000 {
 		compatible = "samsung,exynos4210-secss";
 		reg = <0x10830000 0x300>;
-		interrupts = <0 112 0>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_SSS>;
 		clock-names = "secss";
 	};
diff --git a/src/arm/exynos4210-origen.dts b/src/arm/exynos4210-origen.dts
index ad7394c1d67a..a2c6a13fe67b 100644
--- a/src/arm/exynos4210-origen.dts
+++ b/src/arm/exynos4210-origen.dts
@@ -18,12 +18,14 @@
 #include "exynos4210.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "Insignal Origen evaluation board based on Exynos4210";
 	compatible = "insignal,origen", "samsung,exynos4210", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x10000000
 		       0x50000000 0x10000000
 		       0x60000000 0x10000000
@@ -287,12 +289,6 @@
 	};
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-	status = "okay";
-};
-
 &sdhci_0 {
 	bus-width = <4>;
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
diff --git a/src/arm/exynos4210-pinctrl.dtsi b/src/arm/exynos4210-pinctrl.dtsi
index 9331c6252eff..f280954b260a 100644
--- a/src/arm/exynos4210-pinctrl.dtsi
+++ b/src/arm/exynos4210-pinctrl.dtsi
@@ -14,6 +14,8 @@
  * published by the Free Software Foundation.
 */
 
+#include <dt-bindings/pinctrl/samsung.h>
+
 / {
 	pinctrl@11400000 {
 		gpa0: gpa0 {
@@ -146,245 +148,245 @@
 
 		uart0_data: uart0-data {
 			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart0_fctl: uart0-fctl {
 			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart1_data: uart1-data {
 			samsung,pins = "gpa0-4", "gpa0-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart1_fctl: uart1-fctl {
 			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c2_bus: i2c2-bus {
 			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart2_data: uart2-data {
 			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart2_fctl: uart2-fctl {
 			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart_audio_a: uart-audio-a {
 			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c3_bus: i2c3-bus {
 			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart3_data: uart3-data {
 			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart_audio_b: uart-audio-b {
 			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		spi0_bus: spi0-bus {
 			samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c4_bus: i2c4-bus {
 			samsung,pins = "gpb-2", "gpb-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		spi1_bus: spi1-bus {
 			samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c5_bus: i2c5-bus {
 			samsung,pins = "gpb-6", "gpb-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2s1_bus: i2s1-bus {
 			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 					"gpc0-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pcm1_bus: pcm1-bus {
 			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 					"gpc0-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		ac97_bus: ac97-bus {
 			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 					"gpc0-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2s2_bus: i2s2-bus {
 			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 					"gpc1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pcm2_bus: pcm2-bus {
 			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 					"gpc1-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		spdif_bus: spdif-bus {
 			samsung,pins = "gpc1-0", "gpc1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c6_bus: i2c6-bus {
 			samsung,pins = "gpc1-3", "gpc1-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		spi2_bus: spi2-bus {
 			samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
-			samsung,pin-function = <5>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c7_bus: i2c7-bus {
 			samsung,pins = "gpd0-2", "gpd0-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c0_bus: i2c0-bus {
 			samsung,pins = "gpd1-0", "gpd1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c1_bus: i2c1-bus {
 			samsung,pins = "gpd1-2", "gpd1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pwm0_out: pwm0-out {
 			samsung,pins = "gpd0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pwm1_out: pwm1-out {
 			samsung,pins = "gpd0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pwm2_out: pwm2-out {
 			samsung,pins = "gpd0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pwm3_out: pwm3-out {
 			samsung,pins = "gpd0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_ctrl: lcd-ctrl {
 			samsung,pins = "gpd0-0", "gpd0-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_sync: lcd-sync {
 			samsung,pins = "gpf0-0", "gpf0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_en: lcd-en {
 			samsung,pins = "gpe3-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_clk: lcd-clk {
 			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_data16: lcd-data-width16 {
@@ -392,9 +394,9 @@
 					"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
 					"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
 					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_data18: lcd-data-width18 {
@@ -403,9 +405,9 @@
 					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
 					"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
 					"gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_data24: lcd-data-width24 {
@@ -415,9 +417,9 @@
 					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
 					"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
 					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 	};
 
@@ -535,8 +537,14 @@
 
 			interrupt-controller;
 			interrupt-parent = <&gic>;
-			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <2>;
 		};
 
@@ -546,8 +554,14 @@
 
 			interrupt-controller;
 			interrupt-parent = <&gic>;
-			interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <2>;
 		};
 
@@ -569,263 +583,263 @@
 
 		sd0_clk: sd0-clk {
 			samsung,pins = "gpk0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_cmd: sd0-cmd {
 			samsung,pins = "gpk0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_cd: sd0-cd {
 			samsung,pins = "gpk0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_bus1: sd0-bus-width1 {
 			samsung,pins = "gpk0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_bus4: sd0-bus-width4 {
 			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_bus8: sd0-bus-width8 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_clk: sd4-clk {
 			samsung,pins = "gpk0-0";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_cmd: sd4-cmd {
 			samsung,pins = "gpk0-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_cd: sd4-cd {
 			samsung,pins = "gpk0-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_bus1: sd4-bus-width1 {
 			samsung,pins = "gpk0-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_bus4: sd4-bus-width4 {
 			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_bus8: sd4-bus-width8 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <4>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_clk: sd1-clk {
 			samsung,pins = "gpk1-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_cmd: sd1-cmd {
 			samsung,pins = "gpk1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_cd: sd1-cd {
 			samsung,pins = "gpk1-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_bus1: sd1-bus-width1 {
 			samsung,pins = "gpk1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_bus4: sd1-bus-width4 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_clk: sd2-clk {
 			samsung,pins = "gpk2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_cmd: sd2-cmd {
 			samsung,pins = "gpk2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_cd: sd2-cd {
 			samsung,pins = "gpk2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_bus1: sd2-bus-width1 {
 			samsung,pins = "gpk2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_bus4: sd2-bus-width4 {
 			samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_bus8: sd2-bus-width8 {
 			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_clk: sd3-clk {
 			samsung,pins = "gpk3-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_cmd: sd3-cmd {
 			samsung,pins = "gpk3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_cd: sd3-cd {
 			samsung,pins = "gpk3-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_bus1: sd3-bus-width1 {
 			samsung,pins = "gpk3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_bus4: sd3-bus-width4 {
 			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		eint0: ext-int0 {
 			samsung,pins = "gpx0-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint8: ext-int8 {
 			samsung,pins = "gpx1-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint15: ext-int15 {
 			samsung,pins = "gpx1-7";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint16: ext-int16 {
 			samsung,pins = "gpx2-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint31: ext-int31 {
 			samsung,pins = "gpx3-7";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		cam_port_a_io: cam-port-a-io {
 			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
 					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
 					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		cam_port_a_clk_active: cam-port-a-clk-active {
 			samsung,pins = "gpj1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		cam_port_a_clk_idle: cam-port-a-clk-idle {
 			samsung,pins = "gpj1-3";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		hdmi_cec: hdmi-cec {
 			samsung,pins = "gpx3-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 	};
 
@@ -838,17 +852,17 @@
 		i2s0_bus: i2s0-bus {
 			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 					"gpz-4", "gpz-5", "gpz-6";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pcm0_bus: pcm0-bus {
 			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 					"gpz-4";
-			samsung,pin-function = <0x3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 	};
 };
diff --git a/src/arm/exynos4210-smdkv310.dts b/src/arm/exynos4210-smdkv310.dts
index 94ca7d36ab37..9c98a3724396 100644
--- a/src/arm/exynos4210-smdkv310.dts
+++ b/src/arm/exynos4210-smdkv310.dts
@@ -17,12 +17,14 @@
 /dts-v1/;
 #include "exynos4210.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "Samsung smdkv310 evaluation board based on Exynos4210";
 	compatible = "samsung,smdkv310", "samsung,exynos4210", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 
@@ -132,26 +134,20 @@
 	};
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-	status = "okay";
-};
-
 &pinctrl_1 {
 	keypad_rows: keypad-rows {
 		samsung,pins = "gpx2-0", "gpx2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_cols: keypad-cols {
 		samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
 			       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/src/arm/exynos4210-trats.dts b/src/arm/exynos4210-trats.dts
index 79d983036560..0ca1b4d355f2 100644
--- a/src/arm/exynos4210-trats.dts
+++ b/src/arm/exynos4210-trats.dts
@@ -20,7 +20,8 @@
 	model = "Samsung Trats based on Exynos4210";
 	compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg =  <0x40000000 0x10000000
 			0x50000000 0x10000000
 			0x60000000 0x10000000
diff --git a/src/arm/exynos4210-universal_c210.dts b/src/arm/exynos4210-universal_c210.dts
index 9a75e3effbc9..0c89ea99de54 100644
--- a/src/arm/exynos4210-universal_c210.dts
+++ b/src/arm/exynos4210-universal_c210.dts
@@ -20,7 +20,8 @@
 	model = "Samsung Universal C210 based on Exynos4210 rev0";
 	compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg =  <0x40000000 0x10000000
 			0x50000000 0x10000000>;
 	};
@@ -269,7 +270,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd>;
 	hdmi-en-supply = <&hdmi_en>;
@@ -521,16 +522,16 @@
 &pinctrl_1 {
 	hdmi_hpd: hdmi-hpd {
 		samsung,pins = "gpx3-7";
-		samsung,pin-pud = <0>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 };
 
 &pinctrl_0 {
 	i2c_ddc_bus: i2c-ddc-bus {
 		samsung,pins = "gpe4-2", "gpe4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/src/arm/exynos4210.dtsi b/src/arm/exynos4210.dtsi
index 2d9b02967105..7f3a18c8f60f 100644
--- a/src/arm/exynos4210.dtsi
+++ b/src/arm/exynos4210.dtsi
@@ -109,12 +109,12 @@
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = <0 &gic 0 57 0>,
-					<1 &gic 0 69 0>,
+			interrupt-map = <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>,
+					<1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>,
 					<2 &combiner 12 6>,
 					<3 &combiner 12 7>,
-					<4 &gic 0 42 0>,
-					<5 &gic 0 48 0>;
+					<4 &gic 0 42 IRQ_TYPE_LEVEL_HIGH>,
+					<5 &gic 0 48 IRQ_TYPE_LEVEL_HIGH>;
 		};
 	};
 
@@ -127,18 +127,18 @@
 	pinctrl_0: pinctrl@11400000 {
 		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11400000 0x1000>;
-		interrupts = <0 47 0>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	pinctrl_1: pinctrl@11000000 {
 		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11000000 0x1000>;
-		interrupts = <0 46 0>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 
 		wakup_eint: wakeup-interrupt-controller {
 			compatible = "samsung,exynos4210-wakeup-eint";
 			interrupt-parent = <&gic>;
-			interrupts = <0 32 0>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		};
 	};
 
@@ -182,7 +182,7 @@
 	g2d: g2d@12800000 {
 		compatible = "samsung,s5pv210-g2d";
 		reg = <0x12800000 0x1000>;
-		interrupts = <0 89 0>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
 		clock-names = "sclk_fimg2d", "fimg2d";
 		power-domains = <&pd_lcd0>;
@@ -424,10 +424,22 @@
 
 &combiner {
 	samsung,combiner-nr = <16>;
-	interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-		     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-		     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-		     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
+	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &mdma1 {
diff --git a/src/arm/exynos4412-itop-elite.dts b/src/arm/exynos4412-itop-elite.dts
new file mode 100644
index 000000000000..76d87f397178
--- /dev/null
+++ b/src/arm/exynos4412-itop-elite.dts
@@ -0,0 +1,240 @@
+/*
+ * TOPEET's Exynos4412 based itop board device tree source
+ *
+ * Copyright (c) 2016 SUMOMO Computer Association
+ *			https://www.sumomo.mobi
+ *			Randy Li <ayaka@soulik.info>
+ *
+ * Device tree source file for TOPEET iTop Exynos 4412 core board
+ * which is based on Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/samsung-i2s.h>
+#include "exynos4412-itop-scp-core.dtsi"
+
+/ {
+	model = "TOPEET iTop 4412 Elite board based on Exynos4412";
+	compatible = "topeet,itop4412-elite", "samsung,exynos4412", "samsung,exynos4";
+
+	chosen {
+		bootargs = "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootdelay=1 rootwait";
+		stdout-path = "serial2:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led2 {
+			label = "red:system";
+			gpios = <&gpx1 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led3 {
+			label = "red:user";
+			gpios = <&gpk1 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		home {
+			label = "GPIO Key Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpx1 1 GPIO_ACTIVE_LOW>;
+		};
+
+		back {
+			label = "GPIO Key Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		sleep {
+			label = "GPIO Key Sleep";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
+		};
+
+		vol-up {
+			label = "GPIO Key Vol+";
+			linux,code = <KEY_UP>;
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
+		};
+
+		vol-down {
+			label = "GPIO Key Vol-";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm-sound";
+
+		assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
+				<&clock_audss EXYNOS_MOUT_I2S>,
+				<&clock_audss EXYNOS_DOUT_SRP>,
+				<&clock_audss EXYNOS_DOUT_AUD_BUS>;
+		assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
+				<&clock_audss EXYNOS_MOUT_AUDSS>;
+		assigned-clock-rates = <0>,
+				<0>,
+				<112896000>,
+				<11289600>;
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&link0_codec>;
+		simple-audio-card,frame-master = <&link0_codec>;
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Speaker", "Speaker",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"Speaker", "SPK_LP",
+			"Speaker", "SPK_LN",
+			"Speaker", "SPK_RP",
+			"Speaker", "SPK_RN",
+			"LINPUT1", "Mic Jack",
+			"LINPUT3", "Mic Jack",
+			"RINPUT1", "Mic Jack",
+			"RINPUT2", "Mic Jack";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		link0_codec: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&i2s0 CLK_I2S_CDCLK>;
+			system-clock-frequency = <11289600>;
+		};
+	};
+
+	beep {
+		compatible = "pwm-beeper";
+		pwms = <&pwm 0 4000000 PWM_POLARITY_INVERTED>;
+	};
+
+	camera: camera {
+		pinctrl-0 = <&cam_port_a_clk_active>;
+		pinctrl-names = "default";
+		status = "okay";
+		assigned-clocks = <&clock CLK_MOUT_CAM0>;
+		assigned-clock-parents = <&clock CLK_XUSBXTI>;
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+	/* In order to reset USB ethernet */
+	samsung,vbus-gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
+
+	port@0 {
+		status = "okay";
+	};
+
+	port@2 {
+		status = "okay";
+	};
+};
+
+&exynos_usbphy {
+	status = "okay";
+};
+
+&fimc_0 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+			<&clock CLK_SCLK_FIMC0>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
+
+&hsotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c_4 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c4_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	codec: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&pmu_system_controller 0>;
+		clock-names = "MCLK1";
+		wlf,shared-lrclk;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s0 {
+	pinctrl-0 = <&i2s0_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+	clocks = <&clock_audss EXYNOS_I2S_BUS>,
+		 <&clock_audss EXYNOS_DOUT_AUD_BUS>,
+		 <&clock_audss EXYNOS_SCLK_I2S>;
+	clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+};
+
+&pinctrl_1 {
+	ether-reset {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pwm {
+	status = "okay";
+	pinctrl-0 = <&pwm0_out>;
+	pinctrl-names = "default";
+	samsung,pwm-outputs = <0>;
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+	pinctrl-names = "default";
+	cd-gpio = <&gpx0 7 GPIO_ACTIVE_LOW>;
+	cap-sd-highspeed;
+	vmmc-supply = <&ldo23_reg>;
+	vqmmc-supply = <&ldo17_reg>;
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
diff --git a/src/arm/exynos4412-itop-scp-core.dtsi b/src/arm/exynos4412-itop-scp-core.dtsi
new file mode 100644
index 000000000000..a36cd36a26b8
--- /dev/null
+++ b/src/arm/exynos4412-itop-scp-core.dtsi
@@ -0,0 +1,501 @@
+/*
+ * TOPEET's Exynos4412 based itop board device tree source
+ *
+ * Copyright (c) 2016 SUMOMO Computer Association
+ *			https://www.sumomo.mobi
+ *			Randy Li <ayaka@soulik.info>
+ *
+ * Device tree source file for TOPEET iTop Exynos 4412 SCP package core
+ * board which is based on Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "exynos4412.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
+
+/ {
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	firmware@0203F000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0203F000 0x1000>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+				     /* Corresponds to 800MHz at freq_table */
+				     cooling-device = <&cpu0 7 7>;
+				};
+				map1 {
+				     /* Corresponds to 200MHz at freq_table */
+				     cooling-device = <&cpu0 13 13>;
+			       };
+		       };
+		};
+	};
+
+	usb-hub {
+		compatible = "smsc,usb3503a";
+		reset-gpios = <&gpm2 4 GPIO_ACTIVE_LOW>;
+		connect-gpios = <&gpm3 3 GPIO_ACTIVE_HIGH>;
+		intn-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsic_reset>;
+	};
+};
+
+&bus_dmc {
+	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
+&bus_acp {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_c2c {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_leftbus {
+	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+	vdd-supply = <&buck3_reg>;
+	status = "okay";
+};
+
+&bus_rightbus {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_fsys {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_peri {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_mfc {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&hsotg {
+	vusb_d-supply = <&ldo15_reg>;
+	vusb_a-supply = <&ldo12_reg>;
+};
+
+&i2c_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+	pinctrl-0 = <&i2c1_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	s5m8767: s5m8767-pmic@66 {
+		compatible = "samsung,s5m8767-pmic";
+		reg = <0x66>;
+
+		s5m8767,pmic-buck-default-dvs-idx = <3>;
+
+		s5m8767,pmic-buck-dvs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>,
+						 <&gpb 6 GPIO_ACTIVE_HIGH>,
+						 <&gpb 7 GPIO_ACTIVE_HIGH>;
+
+		s5m8767,pmic-buck-ds-gpios = <&gpm3 5 GPIO_ACTIVE_HIGH>,
+						<&gpm3 6 GPIO_ACTIVE_HIGH>,
+						<&gpm3 7 GPIO_ACTIVE_HIGH>;
+
+		/* VDD_ARM */
+		s5m8767,pmic-buck2-dvs-voltage = <1356250>, <1300000>,
+						 <1243750>, <1118750>,
+						 <1068750>, <1012500>,
+						 <956250>, <900000>;
+		/* VDD_INT */
+		s5m8767,pmic-buck3-dvs-voltage = <1000000>, <1000000>,
+						 <925000>, <925000>,
+						 <887500>, <887500>,
+						 <850000>, <850000>;
+		/* VDD_G3D */
+		s5m8767,pmic-buck4-dvs-voltage = <1081250>, <1081250>,
+						 <1025000>, <950000>,
+						 <918750>, <900000>,
+						 <875000>, <831250>;
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			/* SCP uses 1.5v, POP uses 1.2v */
+			ldo2_reg: LDO2 {
+				regulator-name = "VDDQ_M12";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VDDIOAP_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDDQ_PRE";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VDD_LDO5";
+				op_mode = <0>; /* Always off Mode */
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VDD10_MPLL";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD10_XPLL";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VDD10_MIPI";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VDD33_LCD";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDD18_MIPI";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD18_ABB1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD33_UOTG";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VDDIOPERI_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VDD18_ABB02";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VDD10_USH";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VDD18_HSIC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VDDIOAP_MMC012_28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			/* Used by HSIC */
+			ldo18_reg: LDO18 {
+				regulator-name = "VDDIOPERI_28";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "VDD_LDO19";
+				op_mode = <0>; /* Always off Mode */
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VDD28_CAM";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VDD28_AF";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "VDDA28_2M";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "VDD28_TF";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "VDD33_A31";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "VDD18_CAM";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "VDD18_A31";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "GPS_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "DVDD12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt	= <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt	= <1456250>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <875000>;
+				regulator-max-microvolt	= <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt	= <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "vdd_m12";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt	= <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "vdd12_5m";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt	= <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "pvdd_buck7";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt	= <2000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "pvdd_buck8";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt	= <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "vddf28_emmc";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt	= <3000000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+		};
+
+		s5m8767_osc: clocks {
+			#clock-cells = <1>;
+			clock-output-names = "s5m8767_ap",
+					"s5m8767_cp", "s5m8767_bt";
+		};
+
+	};
+};
+
+&mfc {
+	status = "okay";
+};
+
+&mshc_0 {
+	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+	pinctrl-names = "default";
+	status = "okay";
+	vmmc-supply = <&buck9_reg>;
+	num-slots = <1>;
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+&pinctrl_1 {
+	hsic_reset: hsic-reset {
+		samsung,pins = "gpm2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&tmu {
+	vtmu-supply = <&ldo16_reg>;
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/src/arm/exynos4412-odroid-common.dtsi b/src/arm/exynos4412-odroid-common.dtsi
index ec7619a384a2..8aa19ba14436 100644
--- a/src/arm/exynos4412-odroid-common.dtsi
+++ b/src/arm/exynos4412-odroid-common.dtsi
@@ -13,6 +13,7 @@
 #include "exynos4412.dtsi"
 #include "exynos4412-ppmu-common.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	chosen {
@@ -162,26 +163,26 @@
 
 /* RSTN signal for eMMC */
 &sd1_cd {
-	samsung,pin-pud = <0>;
-	samsung,pin-drv = <0>;
+	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &pinctrl_1 {
 	gpio_power_key: power_key {
 		samsung,pins = "gpx1-3";
-		samsung,pin-pud = <0>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
 	max77686_irq: max77686-irq {
 		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hdmi_hpd: hdmi-hpd {
 		samsung,pins = "gpx3-7";
-		samsung,pin-pud = <1>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 	};
 };
 
@@ -226,7 +227,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd>;
 	vdd-supply = <&ldo8_reg>;
@@ -297,7 +298,6 @@
 				regulator-name = "VDDQ_MMC2_2.8V";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
 				regulator-boot-on;
 			};
 
@@ -390,10 +390,18 @@
 			};
 
 			ldo21_reg: LDO21 {
-				regulator-name = "LDO21_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
+				regulator-name = "TFLASH_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+			};
+
+			ldo22_reg: LDO22 {
+				/*
+				 * Only U3 uses it, so let it define the
+				 * constraints
+				 */
+				regulator-name = "LDO22";
 				regulator-boot-on;
 			};
 
@@ -460,9 +468,11 @@
 			};
 
 			buck8_reg: BUCK8 {
+				/*
+				 * Constraints set by specific board: X,
+				 * X2 and U3.
+				 */
 				regulator-name = "BUCK8_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
 			};
 		};
 	};
@@ -506,7 +516,7 @@
 &mshc_0 {
 	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 	pinctrl-names = "default";
-	vmmc-supply = <&ldo20_reg &buck8_reg>;
+	vmmc-supply = <&ldo20_reg>;
 	mmc-pwrseq = <&emmc_pwrseq>;
 	status = "okay";
 
@@ -530,7 +540,8 @@
 	bus-width = <4>;
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
 	pinctrl-names = "default";
-	vmmc-supply = <&ldo4_reg &ldo21_reg>;
+	vmmc-supply = <&ldo21_reg>;
+	vqmmc-supply = <&ldo4_reg>;
 	cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>;
 	cd-inverted;
 	status = "okay";
diff --git a/src/arm/exynos4412-odroidu3.dts b/src/arm/exynos4412-odroidu3.dts
index dd89f7b37c9f..99634c54dca9 100644
--- a/src/arm/exynos4412-odroidu3.dts
+++ b/src/arm/exynos4412-odroidu3.dts
@@ -18,7 +18,8 @@
 	model = "Hardkernel ODROID-U3 board based on Exynos4412";
 	compatible = "hardkernel,odroid-u3", "samsung,exynos4412", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x7FF00000>;
 	};
 
@@ -69,6 +70,24 @@
 	};
 };
 
+/* Supply for LAN9730/SMSC95xx */
+&buck8_reg {
+	regulator-name = "BUCK8_P3V3";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+/* VDDQ for MSHC (eMMC card) */
+&ldo22_reg {
+	regulator-name = "LDO22_VDDQ_MMC4_2.8V";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&mshc_0 {
+	vqmmc-supply = <&ldo22_reg>;
+};
+
 &pwm {
 	pinctrl-0 = <&pwm0_out>;
 	pinctrl-names = "default";
diff --git a/src/arm/exynos4412-odroidx.dts b/src/arm/exynos4412-odroidx.dts
index bf7b21b817e4..153a75fe6e24 100644
--- a/src/arm/exynos4412-odroidx.dts
+++ b/src/arm/exynos4412-odroidx.dts
@@ -18,7 +18,8 @@
 	model = "Hardkernel ODROID-X board based on Exynos4412";
 	compatible = "hardkernel,odroid-x", "samsung,exynos4412", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x3FF00000>;
 	};
 
@@ -63,16 +64,32 @@
 	};
 };
 
+&adc {
+	vdd-supply = <&ldo10_reg>;
+	status = "okay";
+};
+
+/* VDDQ for MSHC (eMMC card) */
+&buck8_reg {
+	regulator-name = "BUCK8_VDDQ_MMC4_2.8V";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
 &ehci {
 	port@1 {
 		status = "okay";
 	};
 };
 
+&mshc_0 {
+	vqmmc-supply = <&buck8_reg>;
+};
+
 &pinctrl_1 {
 	gpio_home_key: home_key {
 		samsung,pins = "gpx2-2";
-		samsung,pin-pud = <0>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 };
 
diff --git a/src/arm/exynos4412-odroidx2.dts b/src/arm/exynos4412-odroidx2.dts
index 6e33678562ae..4d228858f172 100644
--- a/src/arm/exynos4412-odroidx2.dts
+++ b/src/arm/exynos4412-odroidx2.dts
@@ -17,11 +17,23 @@
 	model = "Hardkernel ODROID-X2 board based on Exynos4412";
 	compatible = "hardkernel,odroid-x2", "samsung,exynos4412", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x7FF00000>;
 	};
 };
 
+/* VDDQ for MSHC (eMMC card) */
+&buck8_reg {
+	regulator-name = "BUCK8_VDDQ_MMC4_2.8V";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&mshc_0 {
+	vqmmc-supply = <&buck8_reg>;
+};
+
 &sound {
 	simple-audio-card,name = "Odroid-X2";
 	simple-audio-card,widgets =
diff --git a/src/arm/exynos4412-origen.dts b/src/arm/exynos4412-origen.dts
index 8bca699b7f20..a1ab6f94bb64 100644
--- a/src/arm/exynos4412-origen.dts
+++ b/src/arm/exynos4412-origen.dts
@@ -16,12 +16,14 @@
 #include "exynos4412.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "Insignal Origen evaluation board based on Exynos4412";
 	compatible = "insignal,origen4412", "samsung,exynos4412", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
 
@@ -83,6 +85,22 @@
 	cpu0-supply = <&buck2_reg>;
 };
 
+&exynos_usbphy {
+	status = "okay";
+};
+
+&ehci {
+	samsung,vbus-gpio = <&gpx3 5 1>;
+	status = "okay";
+
+	port@1{
+		status = "okay";
+	};
+	port@2 {
+		status = "okay";
+	};
+};
+
 &fimd {
 	pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
 	pinctrl-names = "default";
@@ -465,12 +483,6 @@
 	};
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-	status = "okay";
-};
-
 &mshc_0 {
 	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 	pinctrl-names = "default";
@@ -489,16 +501,16 @@
 &pinctrl_1 {
 	keypad_rows: keypad-rows {
 		samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_cols: keypad-cols {
 		samsung,pins = "gpx1-0", "gpx1-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/src/arm/exynos4412-smdk4412.dts b/src/arm/exynos4412-smdk4412.dts
index a51069f3c03b..7fcb43431b59 100644
--- a/src/arm/exynos4412-smdk4412.dts
+++ b/src/arm/exynos4412-smdk4412.dts
@@ -14,12 +14,14 @@
 
 /dts-v1/;
 #include "exynos4412.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "Samsung SMDK evaluation board based on Exynos4412";
 	compatible = "samsung,smdk4412", "samsung,exynos4412", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
 
@@ -111,26 +113,20 @@
 	};
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-	status = "okay";
-};
-
 &pinctrl_1 {
 	keypad_rows: keypad-rows {
 		samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_cols: keypad-cols {
 		samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
 			       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/src/arm/exynos4412-tiny4412.dts b/src/arm/exynos4412-tiny4412.dts
index 4840bbdaa9ec..5504398e6e37 100644
--- a/src/arm/exynos4412-tiny4412.dts
+++ b/src/arm/exynos4412-tiny4412.dts
@@ -23,7 +23,8 @@
 		stdout-path = &serial_0;
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
 
diff --git a/src/arm/exynos4412-trats2.dts b/src/arm/exynos4412-trats2.dts
index 9336fd4824d9..41ecd6d465a7 100644
--- a/src/arm/exynos4412-trats2.dts
+++ b/src/arm/exynos4412-trats2.dts
@@ -30,7 +30,8 @@
 		i2c12 = &i2c_max77693_fuel;
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg =  <0x40000000 0x40000000>;
 	};
 
@@ -253,7 +254,7 @@
 	};
 
 	thermistor-ap {
-		compatible = "ntc,ncp15wb473";
+		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
 		pullup-ohm = <100000>;	 /* 100K */
 		pulldown-ohm = <100000>; /* 100K */
@@ -261,7 +262,7 @@
 	};
 
 	thermistor-battery {
-		compatible = "ntc,ncp15wb473";
+		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
 		pullup-ohm = <100000>;	 /* 100K */
 		pulldown-ohm = <100000>; /* 100K */
diff --git a/src/arm/exynos4x12-pinctrl.dtsi b/src/arm/exynos4x12-pinctrl.dtsi
index 856b29254374..2f866f6e5838 100644
--- a/src/arm/exynos4x12-pinctrl.dtsi
+++ b/src/arm/exynos4x12-pinctrl.dtsi
@@ -12,20 +12,13 @@
  * published by the Free Software Foundation.
 */
 
-#define PIN_PULL_NONE		0
-#define PIN_PULL_DOWN		1
-#define PIN_PULL_UP		3
-
-#define PIN_PDN_OUT0		0
-#define PIN_PDN_OUT1		1
-#define PIN_PDN_INPUT		2
-#define PIN_PDN_PREV		3
-
-#define PIN_SLP(_pin, _mode, _pull)				\
-	_pin {							\
-		samsung,pins = #_pin;				\
-		samsung,pin-con-pdn = <PIN_PDN_ ##_mode>;	\
-		samsung,pin-pud-pdn = <PIN_PULL_ ##_pull>;	\
+#include <dt-bindings/pinctrl/samsung.h>
+
+#define PIN_SLP(_pin, _mode, _pull)					\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>;	\
 	}
 
 / {
@@ -136,245 +129,245 @@
 
 		uart0_data: uart0-data {
 			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart0_fctl: uart0-fctl {
 			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart1_data: uart1-data {
 			samsung,pins = "gpa0-4", "gpa0-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart1_fctl: uart1-fctl {
 			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c2_bus: i2c2-bus {
 			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart2_data: uart2-data {
 			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart2_fctl: uart2-fctl {
 			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart_audio_a: uart-audio-a {
 			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c3_bus: i2c3-bus {
 			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart3_data: uart3-data {
 			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart_audio_b: uart-audio-b {
 			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		spi0_bus: spi0-bus {
 			samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c4_bus: i2c4-bus {
 			samsung,pins = "gpb-0", "gpb-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		spi1_bus: spi1-bus {
 			samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c5_bus: i2c5-bus {
 			samsung,pins = "gpb-2", "gpb-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2s1_bus: i2s1-bus {
 			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 					"gpc0-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pcm1_bus: pcm1-bus {
 			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 					"gpc0-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		ac97_bus: ac97-bus {
 			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 					"gpc0-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2s2_bus: i2s2-bus {
 			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 					"gpc1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pcm2_bus: pcm2-bus {
 			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 					"gpc1-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		spdif_bus: spdif-bus {
 			samsung,pins = "gpc1-0", "gpc1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c6_bus: i2c6-bus {
 			samsung,pins = "gpc1-3", "gpc1-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		spi2_bus: spi2-bus {
 			samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
-			samsung,pin-function = <5>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pwm0_out: pwm0-out {
 			samsung,pins = "gpd0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pwm1_out: pwm1-out {
 			samsung,pins = "gpd0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_ctrl: lcd-ctrl {
 			samsung,pins = "gpd0-0", "gpd0-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c7_bus: i2c7-bus {
 			samsung,pins = "gpd0-2", "gpd0-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pwm2_out: pwm2-out {
 			samsung,pins = "gpd0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pwm3_out: pwm3-out {
 			samsung,pins = "gpd0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c0_bus: i2c0-bus {
 			samsung,pins = "gpd1-0", "gpd1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		mipi0_clk: mipi0-clk {
 			samsung,pins = "gpd1-0", "gpd1-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c1_bus: i2c1-bus {
 			samsung,pins = "gpd1-2", "gpd1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		mipi1_clk: mipi1-clk {
 			samsung,pins = "gpd1-2", "gpd1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_clk: lcd-clk {
 			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_data16: lcd-data-width16 {
@@ -382,9 +375,9 @@
 					"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
 					"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
 					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_data18: lcd-data-width18 {
@@ -393,9 +386,9 @@
 					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
 					"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
 					"gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_data24: lcd-data-width24 {
@@ -405,39 +398,39 @@
 					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
 					"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
 					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_ldi: lcd-ldi {
 			samsung,pins = "gpf3-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		cam_port_a_io: cam-port-a-io {
 			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
 					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
 					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		cam_port_a_clk_active: cam-port-a-clk-active {
 			samsung,pins = "gpj1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		cam_port_a_clk_idle: cam-port-a-clk-idle {
 			samsung,pins = "gpj1-3";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 	};
 
@@ -579,8 +572,14 @@
 
 			interrupt-controller;
 			interrupt-parent = <&gic>;
-			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <2>;
 		};
 
@@ -590,8 +589,14 @@
 
 			interrupt-controller;
 			interrupt-parent = <&gic>;
-			interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <2>;
 		};
 
@@ -613,284 +618,284 @@
 
 		sd0_clk: sd0-clk {
 			samsung,pins = "gpk0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_cmd: sd0-cmd {
 			samsung,pins = "gpk0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_cd: sd0-cd {
 			samsung,pins = "gpk0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_bus1: sd0-bus-width1 {
 			samsung,pins = "gpk0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_bus4: sd0-bus-width4 {
 			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_bus8: sd0-bus-width8 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_clk: sd4-clk {
 			samsung,pins = "gpk0-0";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_cmd: sd4-cmd {
 			samsung,pins = "gpk0-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_cd: sd4-cd {
 			samsung,pins = "gpk0-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_bus1: sd4-bus-width1 {
 			samsung,pins = "gpk0-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_bus4: sd4-bus-width4 {
 			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_bus8: sd4-bus-width8 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_clk: sd1-clk {
 			samsung,pins = "gpk1-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_cmd: sd1-cmd {
 			samsung,pins = "gpk1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_cd: sd1-cd {
 			samsung,pins = "gpk1-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_bus1: sd1-bus-width1 {
 			samsung,pins = "gpk1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_bus4: sd1-bus-width4 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_clk: sd2-clk {
 			samsung,pins = "gpk2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_cmd: sd2-cmd {
 			samsung,pins = "gpk2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_cd: sd2-cd {
 			samsung,pins = "gpk2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_bus1: sd2-bus-width1 {
 			samsung,pins = "gpk2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_bus4: sd2-bus-width4 {
 			samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_bus8: sd2-bus-width8 {
 			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_clk: sd3-clk {
 			samsung,pins = "gpk3-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_cmd: sd3-cmd {
 			samsung,pins = "gpk3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_cd: sd3-cd {
 			samsung,pins = "gpk3-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_bus1: sd3-bus-width1 {
 			samsung,pins = "gpk3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_bus4: sd3-bus-width4 {
 			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		cam_port_b_io: cam-port-b-io {
 			samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
 					"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
 					"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		cam_port_b_clk_active: cam-port-b-clk-active {
 			samsung,pins = "gpm2-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		cam_port_b_clk_idle: cam-port-b-clk-idle {
 			samsung,pins = "gpm2-2";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint0: ext-int0 {
 			samsung,pins = "gpx0-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint8: ext-int8 {
 			samsung,pins = "gpx1-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint15: ext-int15 {
 			samsung,pins = "gpx1-7";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint16: ext-int16 {
 			samsung,pins = "gpx2-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint31: ext-int31 {
 			samsung,pins = "gpx3-7";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		fimc_is_i2c0: fimc-is-i2c0 {
 			samsung,pins = "gpm4-0", "gpm4-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		fimc_is_i2c1: fimc-is-i2c1 {
 			samsung,pins = "gpm4-2", "gpm4-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		fimc_is_uart: fimc-is-uart {
 			samsung,pins = "gpm3-5", "gpm3-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		hdmi_cec: hdmi-cec {
 			samsung,pins = "gpx3-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 	};
 
@@ -906,17 +911,17 @@
 		i2s0_bus: i2s0-bus {
 			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 					"gpz-4", "gpz-5", "gpz-6";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pcm0_bus: pcm0-bus {
 			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 					"gpz-4";
-			samsung,pin-function = <0x3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 	};
 
@@ -971,9 +976,9 @@
 					"gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
 					"gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7",
 					"gpv4-0", "gpv4-1";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 	};
 };
diff --git a/src/arm/exynos4x12.dtsi b/src/arm/exynos4x12.dtsi
index c452499ae8c9..85a7122658f1 100644
--- a/src/arm/exynos4x12.dtsi
+++ b/src/arm/exynos4x12.dtsi
@@ -88,11 +88,11 @@
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = <0 &gic 0 57 0>,
+			interrupt-map = <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>,
 					<1 &combiner 12 5>,
 					<2 &combiner 12 6>,
 					<3 &combiner 12 7>,
-					<4 &gic 1 12 0>;
+					<4 &gic 1 12 IRQ_TYPE_LEVEL_HIGH>;
 		};
 	};
 
@@ -112,7 +112,7 @@
 	g2d: g2d@10800000 {
 		compatible = "samsung,exynos4212-g2d";
 		reg = <0x10800000 0x1000>;
-		interrupts = <0 89 0>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
 		clock-names = "sclk_fimg2d", "fimg2d";
 		iommus = <&sysmmu_g2d>;
@@ -127,7 +127,7 @@
 		fimc_lite_0: fimc-lite@12390000 {
 			compatible = "samsung,exynos4212-fimc-lite";
 			reg = <0x12390000 0x1000>;
-			interrupts = <0 105 0>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&pd_isp>;
 			clocks = <&clock CLK_FIMC_LITE0>;
 			clock-names = "flite";
@@ -138,7 +138,7 @@
 		fimc_lite_1: fimc-lite@123A0000 {
 			compatible = "samsung,exynos4212-fimc-lite";
 			reg = <0x123A0000 0x1000>;
-			interrupts = <0 106 0>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&pd_isp>;
 			clocks = <&clock CLK_FIMC_LITE1>;
 			clock-names = "flite";
@@ -147,9 +147,10 @@
 		};
 
 		fimc_is: fimc-is@12000000 {
-			compatible = "samsung,exynos4212-fimc-is", "simple-bus";
+			compatible = "samsung,exynos4212-fimc-is";
 			reg = <0x12000000 0x260000>;
-			interrupts = <0 90 0>, <0 95 0>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&pd_isp>;
 			clocks = <&clock CLK_FIMC_LITE0>,
 				 <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>,
@@ -157,7 +158,9 @@
 				 <&clock CLK_MOUT_MPLL_USER_T>,
 				 <&clock CLK_FIMC_ISP>, <&clock CLK_FIMC_DRC>,
 				 <&clock CLK_FIMC_FD>, <&clock CLK_MCUISP>,
-				 <&clock CLK_DIV_ISP0>,<&clock CLK_DIV_ISP1>,
+				 <&clock CLK_GICISP>, <&clock CLK_MCUCTL_ISP>,
+				 <&clock CLK_PWM_ISP>,
+				 <&clock CLK_DIV_ISP0>, <&clock CLK_DIV_ISP1>,
 				 <&clock CLK_DIV_MCUISP0>,
 				 <&clock CLK_DIV_MCUISP1>,
 				 <&clock CLK_UART_ISP_SCLK>,
@@ -167,6 +170,7 @@
 			clock-names = "lite0", "lite1", "ppmuispx",
 				      "ppmuispmx", "mpll", "isp",
 				      "drc", "fd", "mcuisp",
+				      "gicisp", "mcuctl_isp", "pwm_isp",
 				      "ispdiv0", "ispdiv1", "mcuispdiv0",
 				      "mcuispdiv1", "uart", "aclk200",
 				      "div_aclk200", "aclk400mcuisp",
@@ -197,7 +201,7 @@
 	mshc_0: mmc@12550000 {
 		compatible = "samsung,exynos4412-dw-mshc";
 		reg = <0x12550000 0x1000>;
-		interrupts = <0 77 0>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		fifo-depth = <0x80>;
@@ -458,11 +462,26 @@
 };
 
 &combiner {
-	interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-		     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-		     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-		     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-		     <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>;
+	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &exynos_usbphy {
@@ -526,18 +545,18 @@
 &pinctrl_0 {
 	compatible = "samsung,exynos4x12-pinctrl";
 	reg = <0x11400000 0x1000>;
-	interrupts = <0 47 0>;
+	interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &pinctrl_1 {
 	compatible = "samsung,exynos4x12-pinctrl";
 	reg = <0x11000000 0x1000>;
-	interrupts = <0 46 0>;
+	interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 
 	wakup_eint: wakeup-interrupt-controller {
 		compatible = "samsung,exynos4210-wakeup-eint";
 		interrupt-parent = <&gic>;
-		interrupts = <0 32 0>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 	};
 };
 
@@ -551,7 +570,7 @@
 &pinctrl_3 {
 	compatible = "samsung,exynos4x12-pinctrl";
 	reg = <0x106E0000 0x1000>;
-	interrupts = <0 72 0>;
+	interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &pmu_system_controller {
diff --git a/src/arm/exynos5.dtsi b/src/arm/exynos5.dtsi
index d5c0f18a4223..7fd870ee5093 100644
--- a/src/arm/exynos5.dtsi
+++ b/src/arm/exynos5.dtsi
@@ -13,104 +13,196 @@
  * published by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include "exynos-syscon-restart.dtsi"
 
 / {
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+		i2c2 = &i2c_2;
+		i2c3 = &i2c_3;
 		serial0 = &serial_0;
 		serial1 = &serial_1;
 		serial2 = &serial_2;
 		serial3 = &serial_3;
 	};
 
-	chipid@10000000 {
-		compatible = "samsung,exynos4210-chipid";
-		reg = <0x10000000 0x100>;
-	};
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
 
-	memory-controller@12250000 {
-		compatible = "samsung,exynos4210-srom";
-		reg = <0x12250000 0x14>;
-	};
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
 
-	combiner: interrupt-controller@10440000 {
-		compatible = "samsung,exynos4210-combiner";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		samsung,combiner-nr = <32>;
-		reg = <0x10440000 0x1000>;
-		interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-				<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-				<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-				<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-				<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-				<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-				<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-				<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
-	};
+		sromc: memory-controller@12250000 {
+			compatible = "samsung,exynos4210-srom";
+			reg = <0x12250000 0x14>;
+		};
 
-	gic: interrupt-controller@10481000 {
-		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg =	<0x10481000 0x1000>,
-			<0x10482000 0x1000>,
-			<0x10484000 0x2000>,
-			<0x10486000 0x2000>;
-		interrupts = <1 9 0xf04>;
-	};
+		combiner: interrupt-controller@10440000 {
+			compatible = "samsung,exynos4210-combiner";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			samsung,combiner-nr = <32>;
+			reg = <0x10440000 0x1000>;
+			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 10 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 23 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 28 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-	serial_0: serial@12C00000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C00000 0x100>;
-		interrupts = <0 51 0>;
-	};
+		gic: interrupt-controller@10481000 {
+			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg =	<0x10481000 0x1000>,
+				<0x10482000 0x1000>,
+				<0x10484000 0x2000>,
+				<0x10486000 0x2000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
 
-	serial_1: serial@12C10000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C10000 0x100>;
-		interrupts = <0 52 0>;
-	};
+		sysreg_system_controller: syscon@10050000 {
+			compatible = "samsung,exynos5-sysreg", "syscon";
+			reg = <0x10050000 0x5000>;
+		};
 
-	serial_2: serial@12C20000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C20000 0x100>;
-		interrupts = <0 53 0>;
-	};
+		serial_0: serial@12C00000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C00000 0x100>;
+			interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-	serial_3: serial@12C30000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C30000 0x100>;
-		interrupts = <0 54 0>;
-	};
+		serial_1: serial@12C10000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C10000 0x100>;
+			interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-	rtc: rtc@101E0000 {
-		compatible = "samsung,s3c6410-rtc";
-		reg = <0x101E0000 0x100>;
-		interrupts = <0 43 0>, <0 44 0>;
-		status = "disabled";
-	};
+		serial_2: serial@12C20000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C20000 0x100>;
+			interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-	fimd: fimd@14400000 {
-		compatible = "samsung,exynos5250-fimd";
-		interrupt-parent = <&combiner>;
-		reg = <0x14400000 0x40000>;
-		interrupt-names = "fifo", "vsync", "lcd_sys";
-		interrupts = <18 4>, <18 5>, <18 6>;
-		samsung,sysreg = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		serial_3: serial@12C30000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C30000 0x100>;
+			interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-	dp: dp-controller@145B0000 {
-		compatible = "samsung,exynos5-dp";
-		reg = <0x145B0000 0x1000>;
-		interrupts = <10 3>;
-		interrupt-parent = <&combiner>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
+		i2c_0: i2c@12C60000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12C60000 0x100>;
+			interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			status = "disabled";
+		};
+
+		i2c_1: i2c@12C70000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12C70000 0x100>;
+			interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			status = "disabled";
+		};
+
+		i2c_2: i2c@12C80000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12C80000 0x100>;
+			interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			status = "disabled";
+		};
+
+		i2c_3: i2c@12C90000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12C90000 0x100>;
+			interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			status = "disabled";
+		};
+
+		pwm: pwm@12DD0000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x12DD0000 0x100>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+		};
+
+		rtc: rtc@101E0000 {
+			compatible = "samsung,s3c6410-rtc";
+			reg = <0x101E0000 0x100>;
+			interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 44 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		fimd: fimd@14400000 {
+			compatible = "samsung,exynos5250-fimd";
+			interrupt-parent = <&combiner>;
+			reg = <0x14400000 0x40000>;
+			interrupt-names = "fifo", "vsync", "lcd_sys";
+			interrupts = <18 4>, <18 5>, <18 6>;
+			samsung,sysreg = <&sysreg_system_controller>;
+			status = "disabled";
+		};
+
+		dp: dp-controller@145B0000 {
+			compatible = "samsung,exynos5-dp";
+			reg = <0x145B0000 0x1000>;
+			interrupts = <10 3>;
+			interrupt-parent = <&combiner>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/src/arm/exynos5250-arndale.dts b/src/arm/exynos5250-arndale.dts
index 85dad29c08dc..6098dacd09f1 100644
--- a/src/arm/exynos5250-arndale.dts
+++ b/src/arm/exynos5250-arndale.dts
@@ -14,12 +14,14 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
 #include "exynos5250.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "Insignal Arndale evaluation board based on EXYNOS5250";
 	compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 
@@ -151,7 +153,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>;
 	vdd_osc-supply = <&ldo10_reg>;
 	vdd_pll-supply = <&ldo8_reg>;
 	vdd-supply = <&ldo8_reg>;
@@ -515,11 +517,6 @@
 	status = "okay";
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-};
-
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
diff --git a/src/arm/exynos5250-pinctrl.dtsi b/src/arm/exynos5250-pinctrl.dtsi
index 880917e508b2..2f6ab32b5954 100644
--- a/src/arm/exynos5250-pinctrl.dtsi
+++ b/src/arm/exynos5250-pinctrl.dtsi
@@ -12,6 +12,8 @@
  * published by the Free Software Foundation.
 */
 
+#include <dt-bindings/pinctrl/samsung.h>
+
 &pinctrl_0 {
 	gpa0: gpa0 {
 		gpio-controller;
@@ -200,392 +202,392 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c2_bus: i2c2-bus {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c2_hs_bus: i2c2-hs-bus {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart2_fctl: uart2-fctl {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c3_bus: i2c3-bus {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c3_hs_bus: i2c3-hs-bus {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart3_data: uart3-data {
 		samsung,pins = "gpa1-4", "gpa1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c4_bus: i2c4-bus {
 		samsung,pins = "gpa2-0", "gpa2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c5_bus: i2c5-bus {
 		samsung,pins = "gpa2-2", "gpa2-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi1_bus: spi1-bus {
 		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s1_bus: i2s1-bus {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pcm1_bus: pcm1-bus {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	ac97_bus: ac97-bus {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s2_bus: i2s2-bus {
 		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
 			       "gpb1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pcm2_bus: pcm2-bus {
 		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
 			       "gpb1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spdif_bus: spdif-bus {
 		samsung,pins = "gpb1-0", "gpb1-1";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi2_bus: spi2-bus {
 		samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
-		samsung,pin-function = <5>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c6_bus: i2c6-bus {
 		samsung,pins = "gpb1-3", "gpb1-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm0_out: pwm0-out {
 		samsung,pins = "gpb2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm1_out: pwm1-out {
 		samsung,pins = "gpb2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm2_out: pwm2-out {
 		samsung,pins = "gpb2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm3_out: pwm3-out {
 		samsung,pins = "gpb2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c7_bus: i2c7-bus {
 		samsung,pins = "gpb2-2", "gpb2-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c0_bus: i2c0-bus {
 		samsung,pins = "gpb3-0", "gpb3-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c1_bus: i2c1-bus {
 		samsung,pins = "gpb3-2", "gpb3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c0_hs_bus: i2c0-hs-bus {
 		samsung,pins = "gpb3-0", "gpb3-1";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c1_hs_bus: i2c1-hs-bus {
 		samsung,pins = "gpb3-2", "gpb3-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpc0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpc0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_cd: sd0-cd {
 		samsung,pins = "gpc0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus1: sd0-bus-width1 {
 		samsung,pins = "gpc0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus4: sd0-bus-width4 {
 		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus8: sd0-bus-width8 {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_clk: sd1-clk {
 		samsung,pins = "gpc2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gpc2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_cd: sd1-cd {
 		samsung,pins = "gpc2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
 		samsung,pins = "gpc2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
 		samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_clk: sd2-clk {
 		samsung,pins = "gpc3-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpc3-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cd: sd2-cd {
 		samsung,pins = "gpc3-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus1: sd2-bus-width1 {
 		samsung,pins = "gpc3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus4: sd2-bus-width4 {
 		samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus8: sd2-bus-width8 {
 		samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_clk: sd3-clk {
 		samsung,pins = "gpc4-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_cmd: sd3-cmd {
 		samsung,pins = "gpc4-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_cd: sd3-cd {
 		samsung,pins = "gpc4-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_bus1: sd3-bus-width1 {
 		samsung,pins = "gpc4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_bus4: sd3-bus-width4 {
 		samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gpd0-0", "gpd0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gpd0-2", "gpd0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	dp_hpd: dp_hpd {
 		samsung,pins = "gpx0-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -666,52 +668,52 @@
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 			       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 			       "gpe1-0", "gpe1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_gpio_b: cam-gpio-b {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
 			       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_i2c2_bus: cam-i2c2-bus {
 		samsung,pins = "gpe0-6", "gpe1-0";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_spi1_bus: cam-spi1-bus {
 		samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_i2c1_bus: cam-i2c1-bus {
 		samsung,pins = "gpf0-2", "gpf0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_i2c0_bus: cam-i2c0-bus {
 		samsung,pins = "gpf0-0", "gpf0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_spi0_bus: cam-spi0-bus {
 		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_bayrgb_bus: cam-bayrgb-bus {
@@ -720,18 +722,18 @@
 			       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
 			       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
 			       "gpg2-0", "gpg2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_port_a: cam-port-a {
 		samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
 			       "gph1-0", "gph1-1", "gph1-2", "gph1-3",
 			       "gph1-4", "gph1-5", "gph1-6", "gph1-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -781,9 +783,9 @@
 			       "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
 			       "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
 			       "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	c2c_txd: c2c-txd {
@@ -791,9 +793,9 @@
 			       "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
 			       "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
 			       "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -809,8 +811,8 @@
 	i2s0_bus: i2s0-bus {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4", "gpz-5", "gpz-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
diff --git a/src/arm/exynos5250-smdk5250.dts b/src/arm/exynos5250-smdk5250.dts
index b7992b13c9de..a97a785ccc6b 100644
--- a/src/arm/exynos5250-smdk5250.dts
+++ b/src/arm/exynos5250-smdk5250.dts
@@ -13,6 +13,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include "exynos5250.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
@@ -21,7 +22,8 @@
 	aliases {
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 
@@ -115,7 +117,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 };
 
 &i2c_0 {
@@ -343,11 +345,6 @@
 	status = "okay";
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-};
-
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
@@ -420,8 +417,8 @@
 &pinctrl_0 {
 	max77686_irq: max77686-irq {
 		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
diff --git a/src/arm/exynos5250-snow-common.dtsi b/src/arm/exynos5250-snow-common.dtsi
index fa14f77df563..8f3a80430748 100644
--- a/src/arm/exynos5250-snow-common.dtsi
+++ b/src/arm/exynos5250-snow-common.dtsi
@@ -19,7 +19,8 @@
 		i2c104 = &i2c_104;
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 
@@ -61,7 +62,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		i2c-parent = <&{/i2c@12CA0000}>;
+		i2c-parent = <&i2c_4>;
 
 		our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
 		their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
@@ -260,7 +261,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 	phy = <&hdmiphy>;
@@ -440,7 +441,7 @@
  * double-pulling gets us out of spec in some cases.
  */
 &i2c2_bus {
-	samsung,pin-pud = <0>;
+	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 };
 
 &i2c_2 {
@@ -522,6 +523,7 @@
 	status = "okay";
 };
 
+/* eMMC flash */
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
@@ -535,6 +537,7 @@
 	cap-mmc-highspeed;
 };
 
+/* uSD card */
 &mmc_2 {
 	status = "okay";
 	num-slots = <1>;
@@ -552,6 +555,8 @@
 /*
  * On Snow we've got SIP WiFi and so can keep drive strengths low to
  * reduce EMI.
+ *
+ * WiFi SDIO module
  */
 &mmc_3 {
 	status = "okay";
@@ -572,81 +577,81 @@
 &pinctrl_0 {
 	wifi_en: wifi-en {
 		samsung,pins = "gpx0-1";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	wifi_rst: wifi-rst {
 		samsung,pins = "gpx0-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	power_key_irq: power-key-irq {
 		samsung,pins = "gpx1-3";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	ec_irq: ec-irq {
 		samsung,pins = "gpx1-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	tps65090_irq: tps65090-irq {
 		samsung,pins = "gpx2-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	usb3_vbus_en: usb3-vbus-en {
 		samsung,pins = "gpx2-7";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	max77686_irq: max77686-irq {
 		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	lid_irq: lid-irq {
 		samsung,pins = "gpx3-5";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_1 {
 	arb_their_claim: arb-their-claim {
 		samsung,pins = "gpe0-4";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	arb_our_claim: arb-our-claim {
 		samsung,pins = "gpf0-3";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -657,16 +662,16 @@
 };
 
 &sd3_bus4 {
-	samsung,pin-drv = <0>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &sd3_clk {
-	samsung,pin-drv = <0>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &sd3_cmd {
-	samsung,pin-pud = <3>;
-	samsung,pin-drv = <0>;
+	samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &spi_1 {
diff --git a/src/arm/exynos5250-snow-rev5.dts b/src/arm/exynos5250-snow-rev5.dts
index f811dc800660..90560c316f64 100644
--- a/src/arm/exynos5250-snow-rev5.dts
+++ b/src/arm/exynos5250-snow-rev5.dts
@@ -40,8 +40,8 @@
 &pinctrl_0 {
 	max98090_irq: max98090-irq {
 		samsung,pins = "gpx0-4";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
diff --git a/src/arm/exynos5250-snow.dts b/src/arm/exynos5250-snow.dts
index 995c7ce6c12b..df48f2cc96f7 100644
--- a/src/arm/exynos5250-snow.dts
+++ b/src/arm/exynos5250-snow.dts
@@ -36,8 +36,8 @@
 &pinctrl_0 {
 	max98095_en: max98095-en {
 		samsung,pins = "gpx1-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
diff --git a/src/arm/exynos5250-spring.dts b/src/arm/exynos5250-spring.dts
index ac291f540812..4d7bdb735ed3 100644
--- a/src/arm/exynos5250-spring.dts
+++ b/src/arm/exynos5250-spring.dts
@@ -14,12 +14,14 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
 #include "exynos5250.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "Google Spring";
 	compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 
@@ -90,7 +92,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 	phy = <&hdmiphy>;
@@ -356,7 +358,7 @@
  * double-pulling gets us out of spec in some cases.
  */
 &i2c2_bus {
-	samsung,pin-pud = <0>;
+	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 };
 
 &i2c_2 {
@@ -424,11 +426,6 @@
 	status = "okay";
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-};
-
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
@@ -464,92 +461,92 @@
 &pinctrl_0 {
 	s5m8767_dvs: s5m8767-dvs {
 		samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	dp_hpd_gpio: dp-hpd-gpio {
 		samsung,pins = "gpc3-0";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	trackpad_irq: trackpad-irq {
 		samsung,pins = "gpx1-2";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	power_key_irq: power-key-irq {
 		samsung,pins = "gpx1-3";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	ec_irq: ec-irq {
 		samsung,pins = "gpx1-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	s5m8767_ds: s5m8767-ds {
 		samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	s5m8767_irq: s5m8767-irq {
 		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	lid_irq: lid-irq {
 		samsung,pins = "gpx3-5";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_1 {
 	hsic_reset: hsic-reset {
 		samsung,pins = "gpe1-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
 &sd1_bus4 {
-	samsung,pin-drv = <0>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &sd1_cd {
-	samsung,pin-drv = <0>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &sd1_clk {
-	samsung,pin-drv = <0>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &sd1_cmd {
-	samsung,pin-pud = <3>;
-	samsung,pin-drv = <0>;
+	samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &spi_1 {
diff --git a/src/arm/exynos5250.dtsi b/src/arm/exynos5250.dtsi
index c7158b2fb213..b6d7444d8585 100644
--- a/src/arm/exynos5250.dtsi
+++ b/src/arm/exynos5250.dtsi
@@ -37,10 +37,6 @@
 		mshc1 = &mmc_1;
 		mshc2 = &mmc_2;
 		mshc3 = &mmc_3;
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-		i2c2 = &i2c_2;
-		i2c3 = &i2c_3;
 		i2c4 = &i2c_4;
 		i2c5 = &i2c_5;
 		i2c6 = &i2c_6;
@@ -96,962 +92,896 @@
 		};
 	};
 
-	sysram@02020000 {
-		compatible = "mmio-sram";
-		reg = <0x02020000 0x30000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x02020000 0x30000>;
+	soc: soc {
+		sysram@02020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x30000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x30000>;
 
-		smp-sysram@0 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x0 0x1000>;
-		};
+			smp-sysram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
 
-		smp-sysram@2f000 {
-			compatible = "samsung,exynos4210-sysram-ns";
-			reg = <0x2f000 0x1000>;
+			smp-sysram@2f000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x2f000 0x1000>;
+			};
 		};
-	};
 
-	pd_gsc: gsc-power-domain@10044000 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044000 0x20>;
-		#power-domain-cells = <0>;
-	};
+		pd_gsc: gsc-power-domain@10044000 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044000 0x20>;
+			#power-domain-cells = <0>;
+		};
 
-	pd_mfc: mfc-power-domain@10044040 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044040 0x20>;
-		#power-domain-cells = <0>;
-	};
+		pd_mfc: mfc-power-domain@10044040 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044040 0x20>;
+			#power-domain-cells = <0>;
+		};
 
-	pd_disp1: disp1-power-domain@100440A0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x100440A0 0x20>;
-		#power-domain-cells = <0>;
-		clocks = <&clock CLK_FIN_PLL>,
-			 <&clock CLK_MOUT_ACLK200_DISP1_SUB>,
-			 <&clock CLK_MOUT_ACLK300_DISP1_SUB>;
-		clock-names = "oscclk", "clk0", "clk1";
-	};
+		pd_disp1: disp1-power-domain@100440A0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x100440A0 0x20>;
+			#power-domain-cells = <0>;
+			clocks = <&clock CLK_FIN_PLL>,
+				 <&clock CLK_MOUT_ACLK200_DISP1_SUB>,
+				 <&clock CLK_MOUT_ACLK300_DISP1_SUB>;
+			clock-names = "oscclk", "clk0", "clk1";
+		};
 
-	clock: clock-controller@10010000 {
-		compatible = "samsung,exynos5250-clock";
-		reg = <0x10010000 0x30000>;
-		#clock-cells = <1>;
-	};
+		clock: clock-controller@10010000 {
+			compatible = "samsung,exynos5250-clock";
+			reg = <0x10010000 0x30000>;
+			#clock-cells = <1>;
+		};
 
-	clock_audss: audss-clock-controller@3810000 {
-		compatible = "samsung,exynos5250-audss-clock";
-		reg = <0x03810000 0x0C>;
-		#clock-cells = <1>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
-			 <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
-		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
-	};
+		clock_audss: audss-clock-controller@3810000 {
+			compatible = "samsung,exynos5250-audss-clock";
+			reg = <0x03810000 0x0C>;
+			#clock-cells = <1>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
+				 <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
+			clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
+		};
 
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
-		/* Unfortunately we need this since some versions of U-Boot
-		 * on Exynos don't set the CNTFRQ register, so we need the
-		 * value from DT.
-		 */
-		clock-frequency = <24000000>;
-	};
+		timer {
+			compatible = "arm,armv7-timer";
+			interrupts = <1 13 0xf08>,
+				     <1 14 0xf08>,
+				     <1 11 0xf08>,
+				     <1 10 0xf08>;
+			/*
+			 * Unfortunately we need this since some versions
+			 * of U-Boot on Exynos don't set the CNTFRQ register,
+			 * so we need the value from DT.
+			 */
+			clock-frequency = <24000000>;
+		};
 
-	mct@101C0000 {
-		compatible = "samsung,exynos4210-mct";
-		reg = <0x101C0000 0x800>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupt-parent = <&mct_map>;
-		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
-			     <4 0>, <5 0>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-		clock-names = "fin_pll", "mct";
-
-		mct_map: mct-map {
+		mct@101C0000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x101C0000 0x800>;
+			interrupt-controller;
 			#interrupt-cells = <2>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0x0 0 &combiner 23 3>,
-					<0x1 0 &combiner 23 4>,
-					<0x2 0 &combiner 25 2>,
-					<0x3 0 &combiner 25 3>,
-					<0x4 0 &gic 0 120 0>,
-					<0x5 0 &gic 0 121 0>;
+			interrupt-parent = <&mct_map>;
+			interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+				     <4 0>, <5 0>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+
+			mct_map: mct-map {
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = <0x0 0 &combiner 23 3>,
+						<0x1 0 &combiner 23 4>,
+						<0x2 0 &combiner 25 2>,
+						<0x3 0 &combiner 25 3>,
+						<0x4 0 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>,
+						<0x5 0 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupt-parent = <&combiner>;
-		interrupts = <1 2>, <22 4>;
-	};
-
-	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x11400000 0x1000>;
-		interrupts = <0 46 0>;
 
-		wakup_eint: wakeup-interrupt-controller {
-			compatible = "samsung,exynos4210-wakeup-eint";
-			interrupt-parent = <&gic>;
-			interrupts = <0 32 0>;
+		pmu {
+			compatible = "arm,cortex-a15-pmu";
+			interrupt-parent = <&combiner>;
+			interrupts = <1 2>, <22 4>;
 		};
-	};
-
-	pinctrl_1: pinctrl@13400000 {
-		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x13400000 0x1000>;
-		interrupts = <0 45 0>;
-	};
 
-	pinctrl_2: pinctrl@10d10000 {
-		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x10d10000 0x1000>;
-		interrupts = <0 50 0>;
-	};
-
-	pinctrl_3: pinctrl@03860000 {
-		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x03860000 0x1000>;
-		interrupts = <0 47 0>;
-	};
-
-	pmu_system_controller: system-controller@10040000 {
-		compatible = "samsung,exynos5250-pmu", "syscon";
-		reg = <0x10040000 0x5000>;
-		clock-names = "clkout16";
-		clocks = <&clock CLK_FIN_PLL>;
-		#clock-cells = <1>;
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-	};
+		pinctrl_0: pinctrl@11400000 {
+			compatible = "samsung,exynos5250-pinctrl";
+			reg = <0x11400000 0x1000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 
-	sysreg_system_controller: syscon@10050000 {
-		compatible = "samsung,exynos5-sysreg", "syscon";
-		reg = <0x10050000 0x5000>;
-	};
+			wakup_eint: wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
 
-	watchdog@101D0000 {
-		compatible = "samsung,exynos5250-wdt";
-		reg = <0x101D0000 0x100>;
-		interrupts = <0 42 0>;
-		clocks = <&clock CLK_WDT>;
-		clock-names = "watchdog";
-		samsung,syscon-phandle = <&pmu_system_controller>;
-	};
+		pinctrl_1: pinctrl@13400000 {
+			compatible = "samsung,exynos5250-pinctrl";
+			reg = <0x13400000 0x1000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-	g2d@10850000 {
-		compatible = "samsung,exynos5250-g2d";
-		reg = <0x10850000 0x1000>;
-		interrupts = <0 91 0>;
-		clocks = <&clock CLK_G2D>;
-		clock-names = "fimg2d";
-		iommus = <&sysmmu_g2d>;
-	};
+		pinctrl_2: pinctrl@10d10000 {
+			compatible = "samsung,exynos5250-pinctrl";
+			reg = <0x10d10000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-	mfc: codec@11000000 {
-		compatible = "samsung,mfc-v6";
-		reg = <0x11000000 0x10000>;
-		interrupts = <0 96 0>;
-		power-domains = <&pd_mfc>;
-		clocks = <&clock CLK_MFC>;
-		clock-names = "mfc";
-		iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
-		iommu-names = "left", "right";
-	};
+		pinctrl_3: pinctrl@03860000 {
+			compatible = "samsung,exynos5250-pinctrl";
+			reg = <0x03860000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-	rotator: rotator@11C00000 {
-		compatible = "samsung,exynos5250-rotator";
-		reg = <0x11C00000 0x64>;
-		interrupts = <0 84 0>;
-		clocks = <&clock CLK_ROTATOR>;
-		clock-names = "rotator";
-		iommus = <&sysmmu_rotator>;
-	};
+		pmu_system_controller: system-controller@10040000 {
+			compatible = "samsung,exynos5250-pmu", "syscon";
+			reg = <0x10040000 0x5000>;
+			clock-names = "clkout16";
+			clocks = <&clock CLK_FIN_PLL>;
+			#clock-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+		};
 
-	tmu: tmu@10060000 {
-		compatible = "samsung,exynos5250-tmu";
-		reg = <0x10060000 0x100>;
-		interrupts = <0 65 0>;
-		clocks = <&clock CLK_TMU>;
-		clock-names = "tmu_apbif";
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
+		watchdog@101D0000 {
+			compatible = "samsung,exynos5250-wdt";
+			reg = <0x101D0000 0x100>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_WDT>;
+			clock-names = "watchdog";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+		};
 
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tmu 0>;
+		g2d@10850000 {
+			compatible = "samsung,exynos5250-g2d";
+			reg = <0x10850000 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_G2D>;
+			clock-names = "fimg2d";
+			iommus = <&sysmmu_g2d>;
+		};
 
-			cooling-maps {
-				map0 {
-				     /* Corresponds to 800MHz at freq_table */
-				     cooling-device = <&cpu0 9 9>;
-				};
-				map1 {
-				     /* Corresponds to 200MHz at freq_table */
-				     cooling-device = <&cpu0 15 15>;
-			       };
-		       };
+		mfc: codec@11000000 {
+			compatible = "samsung,mfc-v6";
+			reg = <0x11000000 0x10000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd_mfc>;
+			clocks = <&clock CLK_MFC>;
+			clock-names = "mfc";
+			iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+			iommu-names = "left", "right";
 		};
-	};
 
-	sata: sata@122F0000 {
-		compatible = "snps,dwc-ahci";
-		samsung,sata-freq = <66>;
-		reg = <0x122F0000 0x1ff>;
-		interrupts = <0 115 0>;
-		clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
-		clock-names = "sata", "sclk_sata";
-		phys = <&sata_phy>;
-		phy-names = "sata-phy";
-		status = "disabled";
-	};
+		rotator: rotator@11C00000 {
+			compatible = "samsung,exynos5250-rotator";
+			reg = <0x11C00000 0x64>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_ROTATOR>;
+			clock-names = "rotator";
+			iommus = <&sysmmu_rotator>;
+		};
 
-	sata_phy: sata-phy@12170000 {
-		compatible = "samsung,exynos5250-sata-phy";
-		reg = <0x12170000 0x1ff>;
-		clocks = <&clock CLK_SATA_PHYCTRL>;
-		clock-names = "sata_phyctrl";
-		#phy-cells = <0>;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		status = "disabled";
-	};
+		tmu: tmu@10060000 {
+			compatible = "samsung,exynos5250-tmu";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
+		};
 
-	i2c_0: i2c@12C60000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C60000 0x100>;
-		interrupts = <0 56 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C0>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		sata: sata@122F0000 {
+			compatible = "snps,dwc-ahci";
+			samsung,sata-freq = <66>;
+			reg = <0x122F0000 0x1ff>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
+			clock-names = "sata", "sclk_sata";
+			phys = <&sata_phy>;
+			phy-names = "sata-phy";
+			status = "disabled";
+		};
 
-	i2c_1: i2c@12C70000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C70000 0x100>;
-		interrupts = <0 57 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C1>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		sata_phy: sata-phy@12170000 {
+			compatible = "samsung,exynos5250-sata-phy";
+			reg = <0x12170000 0x1ff>;
+			clocks = <&clock CLK_SATA_PHYCTRL>;
+			clock-names = "sata_phyctrl";
+			#phy-cells = <0>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+		};
 
-	i2c_2: i2c@12C80000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C80000 0x100>;
-		interrupts = <0 58 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C2>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		/* i2c_0-3 are defined in exynos5.dtsi */
+		i2c_4: i2c@12CA0000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12CA0000 0x100>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C4>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_bus>;
+			status = "disabled";
+		};
 
-	i2c_3: i2c@12C90000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C90000 0x100>;
-		interrupts = <0 59 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C3>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c3_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		i2c_5: i2c@12CB0000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12CB0000 0x100>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C5>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_bus>;
+			status = "disabled";
+		};
 
-	i2c_4: i2c@12CA0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CA0000 0x100>;
-		interrupts = <0 60 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C4>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c4_bus>;
-		status = "disabled";
-	};
+		i2c_6: i2c@12CC0000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12CC0000 0x100>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C6>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_bus>;
+			status = "disabled";
+		};
 
-	i2c_5: i2c@12CB0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CB0000 0x100>;
-		interrupts = <0 61 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C5>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c5_bus>;
-		status = "disabled";
-	};
+		i2c_7: i2c@12CD0000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12CD0000 0x100>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C7>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_bus>;
+			status = "disabled";
+		};
 
-	i2c_6: i2c@12CC0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CC0000 0x100>;
-		interrupts = <0 62 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C6>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c6_bus>;
-		status = "disabled";
-	};
+		i2c_8: i2c@12CE0000 {
+			compatible = "samsung,s3c2440-hdmiphy-i2c";
+			reg = <0x12CE0000 0x1000>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C_HDMI>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
 
-	i2c_7: i2c@12CD0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CD0000 0x100>;
-		interrupts = <0 63 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C7>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c7_bus>;
-		status = "disabled";
-	};
+		i2c_9: i2c@121D0000 {
+			compatible = "samsung,exynos5-sata-phy-i2c";
+			reg = <0x121D0000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SATA_PHYI2C>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
 
-	i2c_8: i2c@12CE0000 {
-		compatible = "samsung,s3c2440-hdmiphy-i2c";
-		reg = <0x12CE0000 0x1000>;
-		interrupts = <0 64 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C_HDMI>;
-		clock-names = "i2c";
-		status = "disabled";
-	};
+		spi_0: spi@12d20000 {
+			compatible = "samsung,exynos4210-spi";
+			status = "disabled";
+			reg = <0x12d20000 0x100>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 5
+				&pdma0 4>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+		};
 
-	i2c_9: i2c@121D0000 {
-                compatible = "samsung,exynos5-sata-phy-i2c";
-                reg = <0x121D0000 0x100>;
-                #address-cells = <1>;
-                #size-cells = <0>;
-		clocks = <&clock CLK_SATA_PHYI2C>;
-		clock-names = "i2c";
-		status = "disabled";
-	};
+		spi_1: spi@12d30000 {
+			compatible = "samsung,exynos4210-spi";
+			status = "disabled";
+			reg = <0x12d30000 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 5
+				&pdma1 4>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+		};
 
-	spi_0: spi@12d20000 {
-		compatible = "samsung,exynos4210-spi";
-		status = "disabled";
-		reg = <0x12d20000 0x100>;
-		interrupts = <0 66 0>;
-		dmas = <&pdma0 5
-			&pdma0 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi0_bus>;
-	};
+		spi_2: spi@12d40000 {
+			compatible = "samsung,exynos4210-spi";
+			status = "disabled";
+			reg = <0x12d40000 0x100>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 7
+				&pdma0 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_bus>;
+		};
 
-	spi_1: spi@12d30000 {
-		compatible = "samsung,exynos4210-spi";
-		status = "disabled";
-		reg = <0x12d30000 0x100>;
-		interrupts = <0 67 0>;
-		dmas = <&pdma1 5
-			&pdma1 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi1_bus>;
-	};
+		mmc_0: mmc@12200000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12200000 0x1000>;
+			clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
 
-	spi_2: spi@12d40000 {
-		compatible = "samsung,exynos4210-spi";
-		status = "disabled";
-		reg = <0x12d40000 0x100>;
-		interrupts = <0 68 0>;
-		dmas = <&pdma0 7
-			&pdma0 6>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_bus>;
-	};
+		mmc_1: mmc@12210000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12210000 0x1000>;
+			clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
 
-	mmc_0: mmc@12200000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		interrupts = <0 75 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12200000 0x1000>;
-		clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x80>;
-		status = "disabled";
-	};
+		mmc_2: mmc@12220000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12220000 0x1000>;
+			clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
 
-	mmc_1: mmc@12210000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		interrupts = <0 76 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12210000 0x1000>;
-		clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x80>;
-		status = "disabled";
-	};
+		mmc_3: mmc@12230000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12230000 0x1000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
 
-	mmc_2: mmc@12220000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		interrupts = <0 77 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12220000 0x1000>;
-		clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x80>;
-		status = "disabled";
-	};
+		i2s0: i2s@03830000 {
+			compatible = "samsung,s5pv210-i2s";
+			status = "disabled";
+			reg = <0x03830000 0x100>;
+			dmas = <&pdma0 10
+				&pdma0 9
+				&pdma0 8>;
+			dma-names = "tx", "rx", "tx-sec";
+			clocks = <&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_SCLK_I2S>;
+			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+			samsung,idma-addr = <0x03000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_bus>;
+		};
 
-	mmc_3: mmc@12230000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		reg = <0x12230000 0x1000>;
-		interrupts = <0 78 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x80>;
-		status = "disabled";
-	};
+		i2s1: i2s@12D60000 {
+			compatible = "samsung,s3c6410-i2s";
+			status = "disabled";
+			reg = <0x12D60000 0x100>;
+			dmas = <&pdma1 12
+				&pdma1 11>;
+			dma-names = "tx", "rx";
+			clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
+			clock-names = "iis", "i2s_opclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s1_bus>;
+		};
 
-	i2s0: i2s@03830000 {
-		compatible = "samsung,s5pv210-i2s";
-		status = "disabled";
-		reg = <0x03830000 0x100>;
-		dmas = <&pdma0 10
-			&pdma0 9
-			&pdma0 8>;
-		dma-names = "tx", "rx", "tx-sec";
-		clocks = <&clock_audss EXYNOS_I2S_BUS>,
-			<&clock_audss EXYNOS_I2S_BUS>,
-			<&clock_audss EXYNOS_SCLK_I2S>;
-		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-		samsung,idma-addr = <0x03000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s0_bus>;
-	};
+		i2s2: i2s@12D70000 {
+			compatible = "samsung,s3c6410-i2s";
+			status = "disabled";
+			reg = <0x12D70000 0x100>;
+			dmas = <&pdma0 12
+				&pdma0 11>;
+			dma-names = "tx", "rx";
+			clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
+			clock-names = "iis", "i2s_opclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s2_bus>;
+		};
 
-	i2s1: i2s@12D60000 {
-		compatible = "samsung,s3c6410-i2s";
-		status = "disabled";
-		reg = <0x12D60000 0x100>;
-		dmas = <&pdma1 12
-			&pdma1 11>;
-		dma-names = "tx", "rx";
-		clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
-		clock-names = "iis", "i2s_opclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s1_bus>;
-	};
+		usb_dwc3 {
+			compatible = "samsung,exynos5250-dwusb3";
+			clocks = <&clock CLK_USB3>;
+			clock-names = "usbdrd30";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbdrd_dwc3: dwc3@12000000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x12000000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
 
-	i2s2: i2s@12D70000 {
-		compatible = "samsung,s3c6410-i2s";
-		status = "disabled";
-		reg = <0x12D70000 0x100>;
-		dmas = <&pdma0 12
-			&pdma0 11>;
-		dma-names = "tx", "rx";
-		clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
-		clock-names = "iis", "i2s_opclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s2_bus>;
-	};
+		usbdrd_phy: phy@12100000 {
+			compatible = "samsung,exynos5250-usbdrd-phy";
+			reg = <0x12100000 0x100>;
+			clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
+			clock-names = "phy", "ref";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <1>;
+		};
 
-	usb_dwc3 {
-		compatible = "samsung,exynos5250-dwusb3";
-		clocks = <&clock CLK_USB3>;
-		clock-names = "usbdrd30";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
+		ehci: usb@12110000 {
+			compatible = "samsung,exynos4210-ehci";
+			reg = <0x12110000 0x100>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 
-		usbdrd_dwc3: dwc3@12000000 {
-			compatible = "synopsys,dwc3";
-			reg = <0x12000000 0x10000>;
-			interrupts = <0 72 0>;
-			phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
-			phy-names = "usb2-phy", "usb3-phy";
+			clocks = <&clock CLK_USB2>;
+			clock-names = "usbhost";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				phys = <&usb2_phy_gen 1>;
+			};
 		};
-	};
-
-	usbdrd_phy: phy@12100000 {
-		compatible = "samsung,exynos5250-usbdrd-phy";
-		reg = <0x12100000 0x100>;
-		clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
-		clock-names = "phy", "ref";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <1>;
-	};
 
-	ehci: usb@12110000 {
-		compatible = "samsung,exynos4210-ehci";
-		reg = <0x12110000 0x100>;
-		interrupts = <0 71 0>;
+		ohci: usb@12120000 {
+			compatible = "samsung,exynos4210-ohci";
+			reg = <0x12120000 0x100>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 
-		clocks = <&clock CLK_USB2>;
-		clock-names = "usbhost";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			phys = <&usb2_phy_gen 1>;
+			clocks = <&clock CLK_USB2>;
+			clock-names = "usbhost";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				phys = <&usb2_phy_gen 1>;
+			};
 		};
-	};
 
-	ohci: usb@12120000 {
-		compatible = "samsung,exynos4210-ohci";
-		reg = <0x12120000 0x100>;
-		interrupts = <0 71 0>;
-
-		clocks = <&clock CLK_USB2>;
-		clock-names = "usbhost";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			phys = <&usb2_phy_gen 1>;
+		usb2_phy_gen: phy@12130000 {
+			compatible = "samsung,exynos5250-usb2-phy";
+			reg = <0x12130000 0x100>;
+			clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>;
+			clock-names = "phy", "ref";
+			#phy-cells = <1>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			samsung,pmureg-phandle = <&pmu_system_controller>;
 		};
-	};
 
-	usb2_phy_gen: phy@12130000 {
-		compatible = "samsung,exynos5250-usb2-phy";
-		reg = <0x12130000 0x100>;
-		clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>;
-		clock-names = "phy", "ref";
-		#phy-cells = <1>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		samsung,pmureg-phandle = <&pmu_system_controller>;
-	};
+		amba {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			interrupt-parent = <&gic>;
+			ranges;
+
+			pdma0: pdma@121A0000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x121A0000 0x1000>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock CLK_PDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			pdma1: pdma@121B0000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x121B0000 0x1000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock CLK_PDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			mdma0: mdma@10800000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x10800000 0x1000>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock CLK_MDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <1>;
+			};
+
+			mdma1: mdma@11C10000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x11C10000 0x1000>;
+				interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock CLK_MDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <1>;
+			};
+		};
 
-	pwm: pwm@12dd0000 {
-		compatible = "samsung,exynos4210-pwm";
-		reg = <0x12dd0000 0x100>;
-		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
-		#pwm-cells = <3>;
-		clocks = <&clock CLK_PWM>;
-		clock-names = "timers";
-	};
+		gsc_0:  gsc@13e00000 {
+			compatible = "samsung,exynos5-gsc";
+			reg = <0x13e00000 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd_gsc>;
+			clocks = <&clock CLK_GSCL0>;
+			clock-names = "gscl";
+			iommu = <&sysmmu_gsc0>;
+		};
 
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		pdma0: pdma@121A0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121A0000 0x1000>;
-			interrupts = <0 34 0>;
-			clocks = <&clock CLK_PDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		pdma1: pdma@121B0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121B0000 0x1000>;
-			interrupts = <0 35 0>;
-			clocks = <&clock CLK_PDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		mdma0: mdma@10800000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x10800000 0x1000>;
-			interrupts = <0 33 0>;
-			clocks = <&clock CLK_MDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
-		};
-
-		mdma1: mdma@11C10000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x11C10000 0x1000>;
-			interrupts = <0 124 0>;
-			clocks = <&clock CLK_MDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
+		gsc_1:  gsc@13e10000 {
+			compatible = "samsung,exynos5-gsc";
+			reg = <0x13e10000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd_gsc>;
+			clocks = <&clock CLK_GSCL1>;
+			clock-names = "gscl";
+			iommu = <&sysmmu_gsc1>;
 		};
-	};
 
-	gsc_0:  gsc@13e00000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e00000 0x1000>;
-		interrupts = <0 85 0>;
-		power-domains = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL0>;
-		clock-names = "gscl";
-		iommu = <&sysmmu_gsc0>;
-	};
+		gsc_2:  gsc@13e20000 {
+			compatible = "samsung,exynos5-gsc";
+			reg = <0x13e20000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd_gsc>;
+			clocks = <&clock CLK_GSCL2>;
+			clock-names = "gscl";
+			iommu = <&sysmmu_gsc2>;
+		};
 
-	gsc_1:  gsc@13e10000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e10000 0x1000>;
-		interrupts = <0 86 0>;
-		power-domains = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL1>;
-		clock-names = "gscl";
-		iommu = <&sysmmu_gsc1>;
-	};
+		gsc_3:  gsc@13e30000 {
+			compatible = "samsung,exynos5-gsc";
+			reg = <0x13e30000 0x1000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd_gsc>;
+			clocks = <&clock CLK_GSCL3>;
+			clock-names = "gscl";
+			iommu = <&sysmmu_gsc3>;
+		};
 
-	gsc_2:  gsc@13e20000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e20000 0x1000>;
-		interrupts = <0 87 0>;
-		power-domains = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL2>;
-		clock-names = "gscl";
-		iommu = <&sysmmu_gsc2>;
-	};
+		hdmi: hdmi@14530000 {
+			compatible = "samsung,exynos4212-hdmi";
+			reg = <0x14530000 0x70000>;
+			power-domains = <&pd_disp1>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+				 <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+				 <&clock CLK_MOUT_HDMI>;
+			clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+					"sclk_hdmiphy", "mout_hdmi";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+		};
 
-	gsc_3:  gsc@13e30000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e30000 0x1000>;
-		interrupts = <0 88 0>;
-		power-domains = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL3>;
-		clock-names = "gscl";
-		iommu = <&sysmmu_gsc3>;
-	};
+		mixer@14450000 {
+			compatible = "samsung,exynos5250-mixer";
+			reg = <0x14450000 0x10000>;
+			power-domains = <&pd_disp1>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+				 <&clock CLK_SCLK_HDMI>;
+			clock-names = "mixer", "hdmi", "sclk_hdmi";
+			iommus = <&sysmmu_tv>;
+		};
 
-	hdmi: hdmi@14530000 {
-		compatible = "samsung,exynos4212-hdmi";
-		reg = <0x14530000 0x70000>;
-		power-domains = <&pd_disp1>;
-		interrupts = <0 95 0>;
-		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
-			 <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
-			 <&clock CLK_MOUT_HDMI>;
-		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
-				"sclk_hdmiphy", "mout_hdmi";
-		samsung,syscon-phandle = <&pmu_system_controller>;
-	};
+		dp_phy: video-phy {
+			compatible = "samsung,exynos5250-dp-video-phy";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+		};
 
-	mixer@14450000 {
-		compatible = "samsung,exynos5250-mixer";
-		reg = <0x14450000 0x10000>;
-		power-domains = <&pd_disp1>;
-		interrupts = <0 94 0>;
-		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-			 <&clock CLK_SCLK_HDMI>;
-		clock-names = "mixer", "hdmi", "sclk_hdmi";
-		iommus = <&sysmmu_tv>;
-	};
+		adc: adc@12D10000 {
+			compatible = "samsung,exynos-adc-v1";
+			reg = <0x12D10000 0x100>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_ADC>;
+			clock-names = "adc";
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+		};
 
-	dp_phy: video-phy {
-		compatible = "samsung,exynos5250-dp-video-phy";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <0>;
-	};
+		sss@10830000 {
+			compatible = "samsung,exynos4210-secss";
+			reg = <0x10830000 0x300>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_SSS>;
+			clock-names = "secss";
+		};
 
-	adc: adc@12D10000 {
-		compatible = "samsung,exynos-adc-v1";
-		reg = <0x12D10000 0x100>;
-		interrupts = <0 106 0>;
-		clocks = <&clock CLK_ADC>;
-		clock-names = "adc";
-		#io-channel-cells = <1>;
-		io-channel-ranges;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		status = "disabled";
-	};
+		sysmmu_g2d: sysmmu@10A60000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x10A60000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <24 5>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>;
+			#iommu-cells = <0>;
+		};
 
-	sss@10830000 {
-		compatible = "samsung,exynos4210-secss";
-		reg = <0x10830000 0x300>;
-		interrupts = <0 112 0>;
-		clocks = <&clock CLK_SSS>;
-		clock-names = "secss";
-	};
+		sysmmu_mfc_r: sysmmu@11200000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11200000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <6 2>;
+			power-domains = <&pd_mfc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_g2d: sysmmu@10A60000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x10A60000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <24 5>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_mfc_l: sysmmu@11210000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11210000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <8 5>;
+			power-domains = <&pd_mfc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_mfc_r: sysmmu@11200000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11200000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <6 2>;
-		power-domains = <&pd_mfc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_rotator: sysmmu@11D40000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11D40000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_mfc_l: sysmmu@11210000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11210000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <8 5>;
-		power-domains = <&pd_mfc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_jpeg: sysmmu@11F20000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11F20000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 2>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_rotator: sysmmu@11D40000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11D40000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_isp: sysmmu@13260000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13260000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <10 6>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_ISP>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_jpeg: sysmmu@11F20000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11F20000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 2>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_drc: sysmmu@13270000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13270000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <11 6>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_DRC>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_isp: sysmmu@13260000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13260000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <10 6>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_ISP>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_fd: sysmmu@132A0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132A0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 0>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_FD>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_drc: sysmmu@13270000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13270000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <11 6>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_DRC>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_scc: sysmmu@13280000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13280000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 2>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_SCC>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_fd: sysmmu@132A0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x132A0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 0>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_FD>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_scp: sysmmu@13290000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13290000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 6>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_SCP>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_scc: sysmmu@13280000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13280000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 2>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_SCC>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_mcuctl: sysmmu@132B0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132B0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 4>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_MCU>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_scp: sysmmu@13290000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13290000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <3 6>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_SCP>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_odc: sysmmu@132C0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132C0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <11 0>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_ODC>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_mcuctl: sysmmu@132B0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x132B0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 4>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_MCU>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_dis0: sysmmu@132D0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132D0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <10 4>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_DIS0>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_odc: sysmmu@132C0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x132C0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <11 0>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_ODC>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_dis1: sysmmu@132E0000{
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132E0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <9 4>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_DIS1>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_dis0: sysmmu@132D0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x132D0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <10 4>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_DIS0>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_3dnr: sysmmu@132F0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132F0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 6>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_3DNR>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_dis1: sysmmu@132E0000{
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x132E0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <9 4>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_DIS1>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_lite0: sysmmu@13C40000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13C40000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 4>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_3dnr: sysmmu@132F0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x132F0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 6>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_3DNR>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_lite1: sysmmu@13C50000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13C50000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <24 1>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_lite0: sysmmu@13C40000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13C40000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <3 4>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_gsc0: sysmmu@13E80000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13E80000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 0>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_lite1: sysmmu@13C50000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13C50000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <24 1>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_gsc1: sysmmu@13E90000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13E90000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 2>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_gsc0: sysmmu@13E80000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13E80000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 0>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_gsc2: sysmmu@13EA0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13EA0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 4>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_gsc1: sysmmu@13E90000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13E90000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 2>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_gsc3: sysmmu@13EB0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13EB0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 6>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_gsc2: sysmmu@13EA0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13EA0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 4>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimd1: sysmmu@14640000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14640000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 2>;
+			power-domains = <&pd_disp1>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_gsc3: sysmmu@13EB0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13EB0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 6>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>;
-		#iommu-cells = <0>;
+		sysmmu_tv: sysmmu@14650000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14650000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <7 4>;
+			power-domains = <&pd_disp1>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
+			#iommu-cells = <0>;
+		};
 	};
 
-	sysmmu_fimd1: sysmmu@14640000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x14640000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <3 2>;
-		power-domains = <&pd_disp1>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
-		#iommu-cells = <0>;
-	};
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tmu 0>;
 
-	sysmmu_tv: sysmmu@14650000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x14650000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <7 4>;
-		power-domains = <&pd_disp1>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
-		#iommu-cells = <0>;
+			cooling-maps {
+				map0 {
+				     /* Corresponds to 800MHz at freq_table */
+				     cooling-device = <&cpu0 9 9>;
+				};
+				map1 {
+				     /* Corresponds to 200MHz at freq_table */
+				     cooling-device = <&cpu0 15 15>;
+			       };
+		       };
+		};
 	};
 };
 
@@ -1070,6 +1000,39 @@
 	iommus = <&sysmmu_fimd1>;
 };
 
+&i2c_0 {
+	clocks = <&clock CLK_I2C0>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_bus>;
+};
+
+&i2c_1 {
+	clocks = <&clock CLK_I2C1>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_bus>;
+};
+
+&i2c_2 {
+	clocks = <&clock CLK_I2C2>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_bus>;
+};
+
+&i2c_3 {
+	clocks = <&clock CLK_I2C3>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_bus>;
+};
+
+&pwm {
+	clocks = <&clock CLK_PWM>;
+	clock-names = "timers";
+};
+
 &rtc {
 	clocks = <&clock CLK_RTC>;
 	clock-names = "rtc";
diff --git a/src/arm/exynos5260-pinctrl.dtsi b/src/arm/exynos5260-pinctrl.dtsi
index f6ee55ea0708..1b911a219a27 100644
--- a/src/arm/exynos5260-pinctrl.dtsi
+++ b/src/arm/exynos5260-pinctrl.dtsi
@@ -12,9 +12,7 @@
  * published by the Free Software Foundation.
 */
 
-#define PIN_PULL_NONE	0
-#define PIN_PULL_DOWN	1
-#define PIN_PULL_UP	3
+#include <dt-bindings/pinctrl/samsung.h>
 
 &pinctrl_0 {
 	gpa0: gpa0 {
@@ -187,217 +185,217 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	spi1_bus: spi1-bus {
 		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	usb3_vbus0_en: usb3-vbus0-en {
 		samsung,pins = "gpa2-4";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2s1_bus: i2s1-bus {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 				"gpb0-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	pcm1_bus: pcm1-bus {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 				"gpb0-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	spdif1_bus: spdif1-bus {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	spi2_bus: spi2-bus {
 		samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c0_hs_bus: i2c0-hs-bus {
 		samsung,pins = "gpb3-0", "gpb3-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c1_hs_bus: i2c1-hs-bus {
 		samsung,pins = "gpb3-2", "gpb3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c2_hs_bus: i2c2-hs-bus {
 		samsung,pins = "gpb3-4", "gpb3-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c3_hs_bus: i2c3-hs-bus {
 		samsung,pins = "gpb3-6", "gpb3-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c4_bus: i2c4-bus {
 		samsung,pins = "gpb4-0", "gpb4-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c5_bus: i2c5-bus {
 		samsung,pins = "gpb4-2", "gpb4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c6_bus: i2c6-bus {
 		samsung,pins = "gpb4-4", "gpb4-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c7_bus: i2c7-bus {
 		samsung,pins = "gpb4-6", "gpb4-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c8_bus: i2c8-bus {
 		samsung,pins = "gpb5-0", "gpb5-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c9_bus: i2c9-bus {
 		samsung,pins = "gpb5-2", "gpb5-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c10_bus: i2c10-bus {
 		samsung,pins = "gpb5-4", "gpb5-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c11_bus: i2c11-bus {
 		samsung,pins = "gpb5-6", "gpb5-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	cam_gpio_a: cam-gpio-a {
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 			"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 			"gpe1-0", "gpe1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	cam_gpio_b: cam-gpio-b {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
 			"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	cam_i2c1_bus: cam-i2c1-bus {
 		samsung,pins = "gpf0-2", "gpf0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	cam_i2c0_bus: cam-i2c0-bus {
 		samsung,pins = "gpf0-0", "gpf0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	cam_spi0_bus: cam-spi0-bus {
 		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	cam_spi1_bus: cam-spi1-bus {
 		samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 };
 
@@ -444,114 +442,114 @@
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpc0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpc0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd0_bus1: sd0-bus-width1 {
 		samsung,pins = "gpc0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd0_bus4: sd0-bus-width4 {
 		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd0_bus8: sd0-bus-width8 {
 		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd0_rdqs: sd0-rdqs {
 		samsung,pins = "gpc0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd1_clk: sd1-clk {
 		samsung,pins = "gpc1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gpc1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
 		samsung,pins = "gpc1-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
 		samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd1_bus8: sd1-bus-width8 {
 		samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd2_clk: sd2-clk {
 		samsung,pins = "gpc2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpc2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd2_cd: sd2-cd {
 		samsung,pins = "gpc2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd2_bus1: sd2-bus-width1 {
 		samsung,pins = "gpc2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd2_bus4: sd2-bus-width4 {
 		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 };
 
diff --git a/src/arm/exynos5260-xyref5260.dts b/src/arm/exynos5260-xyref5260.dts
index 3daef94bee38..d0cc300cfb4b 100644
--- a/src/arm/exynos5260-xyref5260.dts
+++ b/src/arm/exynos5260-xyref5260.dts
@@ -16,7 +16,8 @@
 	model = "SAMSUNG XYREF5260 board based on EXYNOS5260";
 	compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5";
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x80000000>;
 	};
 
@@ -42,9 +43,9 @@
 &pinctrl_0 {
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/src/arm/exynos5260.dtsi b/src/arm/exynos5260.dtsi
index 36da38e29000..5818718618b1 100644
--- a/src/arm/exynos5260.dtsi
+++ b/src/arm/exynos5260.dtsi
@@ -9,13 +9,15 @@
  * published by the Free Software Foundation.
 */
 
-#include "skeleton.dtsi"
-
 #include <dt-bindings/clock/exynos5260-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	compatible = "samsung,exynos5260", "samsung,exynos5";
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		pinctrl0 = &pinctrl_0;
@@ -168,7 +170,8 @@
 				<0x10482000 0x1000>,
 				<0x10484000 0x2000>,
 				<0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
 		chipid: chipid@10000000 {
@@ -181,10 +184,18 @@
 			reg = <0x100B0000 0x1000>;
 			clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
 			clock-names = "fin_pll", "mct";
-			interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
-					<0 107 0>, <0 122 0>, <0 123 0>,
-					<0 124 0>, <0 125 0>, <0 126 0>,
-					<0 127 0>, <0 128 0>, <0 129 0>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		cci: cci@10F00000 {
@@ -210,25 +221,25 @@
 		pinctrl_0: pinctrl@11600000 {
 			compatible = "samsung,exynos5260-pinctrl";
 			reg = <0x11600000 0x1000>;
-			interrupts = <0 79 0>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 
 			wakeup-interrupt-controller {
 				compatible = "samsung,exynos4210-wakeup-eint";
 				interrupt-parent = <&gic>;
-				interrupts = <0 32 0>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
 		pinctrl_1: pinctrl@12290000 {
 			compatible = "samsung,exynos5260-pinctrl";
 			reg = <0x12290000 0x1000>;
-			interrupts = <0 157 0>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_2: pinctrl@128B0000 {
 			compatible = "samsung,exynos5260-pinctrl";
 			reg = <0x128B0000 0x1000>;
-			interrupts = <0 243 0>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pmu_system_controller: system-controller@10D50000 {
@@ -239,7 +250,7 @@
 		uart0: serial@12C00000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x12C00000 0x100>;
-			interrupts = <0 146 0>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
 			clock-names = "uart", "clk_uart_baud0";
 			status = "disabled";
@@ -248,7 +259,7 @@
 		uart1: serial@12C10000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x12C10000 0x100>;
-			interrupts = <0 147 0>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
 			clock-names = "uart", "clk_uart_baud0";
 			status = "disabled";
@@ -257,7 +268,7 @@
 		uart2: serial@12C20000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x12C20000 0x100>;
-			interrupts = <0 148 0>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
 			clock-names = "uart", "clk_uart_baud0";
 			status = "disabled";
@@ -266,7 +277,7 @@
 		uart3: serial@12860000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x12860000 0x100>;
-			interrupts = <0 145 0>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
 			clock-names = "uart", "clk_uart_baud0";
 			status = "disabled";
@@ -275,7 +286,7 @@
 		mmc_0: mmc@12140000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12140000 0x2000>;
-			interrupts = <0 156 0>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
@@ -287,7 +298,7 @@
 		mmc_1: mmc@12150000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12150000 0x2000>;
-			interrupts = <0 158 0>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
@@ -299,7 +310,7 @@
 		mmc_2: mmc@12160000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12160000 0x2000>;
-			interrupts = <0 159 0>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
diff --git a/src/arm/exynos5410-odroidxu.dts b/src/arm/exynos5410-odroidxu.dts
new file mode 100644
index 000000000000..c4de1353e5df
--- /dev/null
+++ b/src/arm/exynos5410-odroidxu.dts
@@ -0,0 +1,647 @@
+/*
+ * Hardkernel Odroid XU board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2016 Krzysztof Kozlowski
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos5410.dtsi"
+#include <dt-bindings/clock/maxim,max77802.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/samsung-i2s.h>
+#include "exynos54xx-odroidxu-leds.dtsi"
+
+/ {
+	model = "Hardkernel Odroid XU";
+	compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x7ea00000>;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	emmc_pwrseq: pwrseq {
+		pinctrl-0 = <&emmc_nrst_pin>;
+		pinctrl-names = "default";
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm 0 20972 0>;
+		cooling-min-state = <0>;
+		cooling-max-state = <3>;
+		#cooling-cells = <2>;
+		cooling-levels = <0 130 170 230>;
+	};
+
+	fin_pll: xxti {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
+	firmware@02073000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02073000 0x1000>;
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "Odroid-XU";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Speakers", "Speakers";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Headphone Jack", "MICBIAS",
+			"IN1", "Headphone Jack",
+			"Speakers", "SPKL",
+			"Speakers", "SPKR";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&link0_codec>;
+		simple-audio-card,frame-master = <&link0_codec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&audi2s0 0>;
+			system-clock-frequency = <19200000>;
+		};
+
+		link0_codec: simple-audio-card,codec {
+			sound-dai = <&max98090>;
+			clocks = <&audi2s0 CLK_I2S_CDCLK>;
+		};
+	};
+};
+
+&audi2s0 {
+	status = "okay";
+};
+
+&clock {
+	clocks = <&fin_pll>;
+	assigned-clocks = <&clock CLK_FOUT_EPLL>;
+	assigned-clock-rates = <192000000>;
+};
+
+&clock_audss {
+	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
+			<&clock_audss EXYNOS_MOUT_I2S>,
+			<&clock_audss EXYNOS_DOUT_SRP>,
+			<&clock_audss EXYNOS_DOUT_AUD_BUS>;
+
+	assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
+			<&clock_audss EXYNOS_MOUT_AUDSS>;
+
+	assigned-clock-rates =  <0>,
+				<0>,
+				<96000000>,
+				<19200000>;
+};
+
+&cpu0_thermal {
+	thermal-sensors = <&tmu_cpu0 0>;
+	polling-delay-passive = <0>;
+	polling-delay = <0>;
+
+	trips {
+		cpu_alert0: cpu-alert-0 {
+			temperature = <50000>; /* millicelsius */
+			hysteresis = <5000>; /* millicelsius */
+			type = "active";
+		};
+		cpu_alert1: cpu-alert-1 {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <5000>; /* millicelsius */
+			type = "active";
+		};
+		cpu_alert2: cpu-alert-2 {
+			temperature = <70000>; /* millicelsius */
+			hysteresis = <5000>; /* millicelsius */
+			type = "active";
+		};
+		cpu_crit0: cpu-crit-0 {
+			temperature = <120000>; /* millicelsius */
+			hysteresis = <0>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert0>;
+			cooling-device = <&fan0 0 1>;
+		};
+		map1 {
+			trip = <&cpu_alert1>;
+			cooling-device = <&fan0 1 2>;
+		};
+		map2 {
+			trip = <&cpu_alert2>;
+			cooling-device = <&fan0 2 3>;
+		};
+	};
+};
+
+&hsi2c_4 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+	status = "okay";
+
+	usb3503: usb-hub@08 {
+		compatible = "smsc,usb3503";
+		reg = <0x08>;
+
+		intn-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+		connect-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpx1 4 GPIO_ACTIVE_HIGH>;
+		initial-mode = <1>;
+
+		clock-names = "refclk";
+		clocks = <&pmu_system_controller 0>;
+		refclk-frequency = <24000000>;
+	};
+
+	max77802: pmic@09 {
+		compatible = "maxim,max77802";
+		reg = <0x9>;
+		interrupt-parent = <&gpx0>;
+		interrupts = <4 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>,
+			    <&pmic_dvs_3>;
+		#clock-cells = <1>;
+
+		inl1-supply = <&buck5_reg>;
+		inl2-supply = <&buck7_reg>;
+		inl3-supply = <&buck9_reg>;
+		inl4-supply = <&buck9_reg>;
+		inl5-supply = <&buck9_reg>;
+		inl6-supply = <&buck10_reg>;
+		inl7-supply = <&buck9_reg>;
+		/* inl9 supply is BOOST, not configured here */
+		inl10-supply = <&buck7_reg>;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "vdd_mem";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "vdd_kfc";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "buck7";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck8_reg: BUCK8 {
+				/* vdd_mmc0 */
+				regulator-name = "vddf_2v85";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "buck9";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "buck10";
+				regulator-min-microvolt = <2950000>;
+				regulator-max-microvolt = <2950000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "vdd_alive";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "vddq_m1_m2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "vddq_gpio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "vddq_mmc2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				/* Having it off prevents reboot */
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "vdd18_hsic";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "vdd18_bpll";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "vddq_lcd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "vdd10_hdmi";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "ldo9";
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "vdd18_mipi";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "vddq_mmc01";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				/*
+				 * Having it off prevents accessing MMC after
+				 * reboot with error:
+				 * MMC Device 1: Clock OFF has been failed.
+				 */
+				regulator-always-on;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "vdd33_usb3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "vddq_abbg0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "vddq_abbg1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "vdd10_usb3";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "ldo16";
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "cam_sensor_core";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "ldo18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "ldo19";
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "vdd_mmc0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo21_reg: LDO21 {
+				/* vdd_mmc2 */
+				regulator-name = "vddf_2v8";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "ldo22";
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "dp_p3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "cam_af";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "eth_p3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "usb30_extclk";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "ldo27";
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "ldo28";
+			};
+
+			ldo29_reg: LDO29 {
+				regulator-name = "ldo29";
+			};
+
+			ldo30_reg: LDO30 {
+				regulator-name = "vddq_e1_e2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo31_reg: LDO31 {
+				regulator-name = "ldo31";
+			};
+
+			/* On revisions with ti,ina231 this is sensor VS */
+			ldo32_reg: LDO32 {
+				regulator-name = "vs_power_meter";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo33_reg: LDO33 {
+				regulator-name = "ldo33";
+			};
+
+			ldo34_reg: LDO34 {
+				regulator-name = "ldo34";
+			};
+
+			ldo35_reg: LDO35 {
+				regulator-name = "ldo35";
+			};
+		};
+	};
+};
+
+&i2c_1 {
+	status = "okay";
+	max98090: max98090@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupt-parent = <&gpj3>;
+		interrupts = <0 IRQ_TYPE_NONE>;
+		clocks = <&audi2s0 CLK_I2S_CDCLK>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&mmc_0 {
+	status = "okay";
+	mmc-pwrseq = <&emmc_pwrseq>;
+	cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	vmmc-supply = <&ldo20_reg>;
+	vqmmc-supply = <&ldo11_reg>;
+};
+
+&mmc_2 {
+	status = "okay";
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	vmmc-supply = <&ldo21_reg>;
+	vqmmc-supply = <&ldo4_reg>;
+};
+
+&pinctrl_0 {
+	emmc_nrst_pin: emmc-nrst {
+		samsung,pins = "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pmic_dvs_3: pmic-dvs-3 {
+		samsung,pins = "gpx0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pmic_dvs_2: pmic-dvs-2 {
+		samsung,pins = "gpx0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pmic_dvs_1: pmic-dvs-1 {
+		samsung,pins = "gpx0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-val = <1>;
+	};
+
+	max77802_irq: max77802-irq {
+		samsung,pins = "gpx0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pwm {
+	/*
+	 * PWM 0 -- fan
+	 * PWM 1 -- Green LED
+	 * PWM 2 -- Blue LED
+	 * PWM 3 -- on MIPI connector for backlight
+	 */
+	pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&tmu_cpu0 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "peripheral";
+};
+
+&usbdrd3_0 {
+	vdd33-supply = <&ldo12_reg>;
+	vdd10-supply = <&ldo15_reg>;
+};
+
+&usbdrd3_1 {
+	vdd33-supply = <&ldo12_reg>;
+	vdd10-supply = <&ldo15_reg>;
+};
diff --git a/src/arm/exynos5410-pinctrl.dtsi b/src/arm/exynos5410-pinctrl.dtsi
index f9aa6bb55464..ff46a1c27182 100644
--- a/src/arm/exynos5410-pinctrl.dtsi
+++ b/src/arm/exynos5410-pinctrl.dtsi
@@ -9,6 +9,8 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/pinctrl/samsung.h>
+
 &pinctrl_0 {
 	gpa0: gpa0 {
 		gpio-controller;
@@ -277,6 +279,216 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c2_bus: i2c2-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart2_fctl: uart2-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c3_bus: i2c3-bus {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c4_hs_bus: i2c4-hs-bus {
+		samsung,pins = "gpa2-0", "gpa2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c5_hs_bus: i2c5-hs-bus {
+		samsung,pins = "gpa2-2", "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c6_hs_bus: i2c6-hs-bus {
+		samsung,pins = "gpb1-3", "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpb2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpb2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpb2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c7_hs_bus: i2c7-hs-bus {
+		samsung,pins = "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		samsung,pins = "gpb3-2", "gpb3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpc0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpc2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpc2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
 };
 
 &pinctrl_1 {
@@ -403,4 +615,13 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
+
+	audi2s0_bus: audi2s0-bus {
+		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+				"gpz-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
 };
diff --git a/src/arm/exynos5410-smdk5410.dts b/src/arm/exynos5410-smdk5410.dts
index 0f6429e1b75c..6cc74d97daae 100644
--- a/src/arm/exynos5410-smdk5410.dts
+++ b/src/arm/exynos5410-smdk5410.dts
@@ -16,7 +16,8 @@
 	model = "Samsung SMDK5410 board based on EXYNOS5410";
 	compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 
@@ -66,8 +67,8 @@
 	srom_ctl: srom-ctl {
 		samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
 			       "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	srom_ebi: srom-ebi {
@@ -77,9 +78,9 @@
 			       "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7",
 			       "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3",
 			       "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
@@ -102,14 +103,14 @@
 	};
 };
 
-&uart0 {
+&serial_0 {
 	status = "okay";
 };
 
-&uart1 {
+&serial_1 {
 	status = "okay";
 };
 
-&uart2 {
+&serial_2 {
 	status = "okay";
 };
diff --git a/src/arm/exynos5410.dtsi b/src/arm/exynos5410.dtsi
index 7a56aec2c5ba..2b6adafe18e2 100644
--- a/src/arm/exynos5410.dtsi
+++ b/src/arm/exynos5410.dtsi
@@ -13,9 +13,11 @@
  * published by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
+#include "exynos54xx.dtsi"
 #include "exynos-syscon-restart.dtsi"
 #include <dt-bindings/clock/exynos5410.h>
+#include <dt-bindings/clock/exynos-audss-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	compatible = "samsung,exynos5410", "samsung,exynos5";
@@ -26,37 +28,34 @@
 		pinctrl1 = &pinctrl_1;
 		pinctrl2 = &pinctrl_2;
 		pinctrl3 = &pinctrl_3;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
 	};
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x0>;
 			clock-frequency = <1600000000>;
 		};
 
-		CPU1: cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x1>;
 			clock-frequency = <1600000000>;
 		};
 
-		CPU2: cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x2>;
 			clock-frequency = <1600000000>;
 		};
 
-		CPU3: cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x3>;
@@ -70,111 +69,68 @@
 		#size-cells = <1>;
 		ranges;
 
-		combiner: interrupt-controller@10440000 {
-			compatible = "samsung,exynos4210-combiner";
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			samsung,combiner-nr = <32>;
-			reg = <0x10440000 0x1000>;
-			interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-					<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-					<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-					<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-					<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-					<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-					<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-					<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+		pmu_system_controller: system-controller@10040000 {
+			compatible = "samsung,exynos5410-pmu", "syscon";
+			reg = <0x10040000 0x5000>;
+			clock-names = "clkout16";
+			clocks = <&fin_pll>;
+			#clock-cells = <1>;
 		};
 
-		gic: interrupt-controller@10481000 {
-			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg =	<0x10481000 0x1000>,
-				<0x10482000 0x1000>,
-				<0x10484000 0x2000>,
-				<0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
+		clock: clock-controller@10010000 {
+			compatible = "samsung,exynos5410-clock";
+			reg = <0x10010000 0x30000>;
+			#clock-cells = <1>;
 		};
 
-		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
-			reg = <0x10000000 0x100>;
+		clock_audss: audss-clock-controller@3810000 {
+			compatible = "samsung,exynos5410-audss-clock";
+			reg = <0x03810000 0x0C>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock CLK_FOUT_EPLL>;
+			clock-names = "pll_ref", "pll_in";
 		};
 
-		sromc: memory-controller@12250000 {
-			compatible = "samsung,exynos4210-srom";
-			reg = <0x12250000 0x14>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0 0 0x04000000 0x20000
-				  1 0 0x05000000 0x20000
-				  2 0 0x06000000 0x20000
-				  3 0 0x07000000 0x20000>;
+		tmu_cpu0: tmu@10060000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
 		};
 
-		pmu_system_controller: system-controller@10040000 {
-			compatible = "samsung,exynos5410-pmu", "syscon";
-			reg = <0x10040000 0x5000>;
+		tmu_cpu1: tmu@10064000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x10064000 0x100>;
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
 		};
 
-		mct: mct@101C0000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x101C0000 0xB00>;
-			interrupt-parent = <&interrupt_map>;
-			interrupts = <0>, <1>, <2>, <3>,
-				<4>, <5>, <6>, <7>,
-				<8>, <9>, <10>, <11>;
-			clocks = <&fin_pll>, <&clock CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-
-			interrupt_map: interrupt-map {
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = <0 &combiner 23 3>,
-						<1 &combiner 23 4>,
-						<2 &combiner 25 2>,
-						<3 &combiner 25 3>,
-						<4 &gic 0 120 0>,
-						<5 &gic 0 121 0>,
-						<6 &gic 0 122 0>,
-						<7 &gic 0 123 0>,
-						<8 &gic 0 128 0>,
-						<9 &gic 0 129 0>,
-						<10 &gic 0 130 0>,
-						<11 &gic 0 131 0>;
-			};
+		tmu_cpu2: tmu@10068000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x10068000 0x100>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
 		};
 
-		sysram@02020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x54000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x54000>;
-
-			smp-sysram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sysram@53000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x53000 0x1000>;
-			};
-		};
-
-		clock: clock-controller@10010000 {
-			compatible = "samsung,exynos5410-clock";
-			reg = <0x10010000 0x30000>;
-			#clock-cells = <1>;
+		tmu_cpu3: tmu@1006c000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x1006c000 0x100>;
+			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
 		};
 
 		mmc_0: mmc@12200000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12200000 0x1000>;
-			interrupts = <0 75 0>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
@@ -186,7 +142,7 @@
 		mmc_1: mmc@12210000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12210000 0x1000>;
-			interrupts = <0 76 0>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
@@ -198,7 +154,7 @@
 		mmc_2: mmc@12220000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12220000 0x1000>;
-			interrupts = <0 77 0>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
@@ -210,60 +166,258 @@
 		pinctrl_0: pinctrl@13400000 {
 			compatible = "samsung,exynos5410-pinctrl";
 			reg = <0x13400000 0x1000>;
-			interrupts = <0 45 0>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 
 			wakeup-interrupt-controller {
 				compatible = "samsung,exynos4210-wakeup-eint";
 				interrupt-parent = <&gic>;
-				interrupts = <0 32 0>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
 		pinctrl_1: pinctrl@14000000 {
 			compatible = "samsung,exynos5410-pinctrl";
 			reg = <0x14000000 0x1000>;
-			interrupts = <0 46 0>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_2: pinctrl@10d10000 {
 			compatible = "samsung,exynos5410-pinctrl";
 			reg = <0x10d10000 0x1000>;
-			interrupts = <0 50 0>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_3: pinctrl@03860000 {
 			compatible = "samsung,exynos5410-pinctrl";
 			reg = <0x03860000 0x1000>;
-			interrupts = <0 47 0>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		uart0: serial@12C00000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C00000 0x100>;
-			interrupts = <0 51 0>;
-			clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
+		amba {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			interrupt-parent = <&gic>;
+			ranges;
+
+			pdma0: pdma@12680000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x121A0000 0x1000>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock CLK_PDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			pdma1: pdma@12690000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x121B0000 0x1000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock CLK_PDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
 		};
 
-		uart1: serial@12C10000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C10000 0x100>;
-			interrupts = <0 52 0>;
-			clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-			clock-names = "uart", "clk_uart_baud0";
+		audi2s0: i2s@03830000 {
+			compatible = "samsung,exynos5420-i2s";
+			reg = <0x03830000 0x100>;
+			dmas = <&pdma0 10
+				&pdma0 9
+				&pdma0 8>;
+			dma-names = "tx", "rx", "tx-sec";
+			clocks = <&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_SCLK_I2S>;
+			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk0";
+			#sound-dai-cells = <1>;
+			samsung,idma-addr = <0x03000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&audi2s0_bus>;
 			status = "disabled";
 		};
+	};
 
-		uart2: serial@12C20000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C20000 0x100>;
-			interrupts = <0 53 0>;
-			clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			thermal-sensors = <&tmu_cpu0>;
+			#include "exynos5420-trip-points.dtsi"
+		};
+		cpu1_thermal: cpu1-thermal {
+		       thermal-sensors = <&tmu_cpu1>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
+		cpu2_thermal: cpu2-thermal {
+		       thermal-sensors = <&tmu_cpu2>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
+		cpu3_thermal: cpu3-thermal {
+		       thermal-sensors = <&tmu_cpu3>;
+		       #include "exynos5420-trip-points.dtsi"
 		};
 	};
 };
 
+&i2c_0 {
+	clocks = <&clock CLK_I2C0>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_bus>;
+};
+
+&i2c_1 {
+	clocks = <&clock CLK_I2C1>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_bus>;
+};
+
+&i2c_2 {
+	clocks = <&clock CLK_I2C2>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_bus>;
+};
+
+&i2c_3 {
+	clocks = <&clock CLK_I2C3>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_bus>;
+};
+
+&hsi2c_4 {
+	clocks = <&clock CLK_USI0>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_hs_bus>;
+};
+
+&hsi2c_5 {
+	clocks = <&clock CLK_USI1>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_hs_bus>;
+};
+
+&hsi2c_6 {
+	clocks = <&clock CLK_USI2>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_hs_bus>;
+};
+
+&hsi2c_7 {
+	clocks = <&clock CLK_USI3>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_hs_bus>;
+};
+
+&mct {
+	clocks = <&fin_pll>, <&clock CLK_MCT>;
+	clock-names = "fin_pll", "mct";
+};
+
+&pwm {
+	clocks = <&clock CLK_PWM>;
+	clock-names = "timers";
+};
+
+&rtc {
+	clocks = <&clock CLK_RTC>;
+	clock-names = "rtc";
+	interrupt-parent = <&pmu_system_controller>;
+	status = "disabled";
+};
+
+&serial_0 {
+	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+	clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_1 {
+	clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+	clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_2 {
+	clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+	clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_3 {
+	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+	clock-names = "uart", "clk_uart_baud0";
+};
+
+&sss {
+	clocks = <&clock CLK_SSS>;
+	clock-names = "secss";
+};
+
+&sromc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x04000000 0x20000
+		  1 0 0x05000000 0x20000
+		  2 0 0x06000000 0x20000
+		  3 0 0x07000000 0x20000>;
+};
+
+&usbdrd3_0 {
+	clocks = <&clock CLK_USBD300>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_phy0 {
+	clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbdrd3_1 {
+	clocks = <&clock CLK_USBD301>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_dwc3_1 {
+	interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usbdrd_phy1 {
+	clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbhost1 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usbhost2 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usb2_phy {
+	clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,sysreg-phandle = <&sysreg_system_controller>;
+	samsung,pmureg-phandle = <&pmu_system_controller>;
+};
+
+&watchdog {
+	clocks = <&clock CLK_WDT>;
+	clock-names = "watchdog";
+	samsung,syscon-phandle = <&pmu_system_controller>;
+};
+
 #include "exynos5410-pinctrl.dtsi"
diff --git a/src/arm/exynos5420-arndale-octa.dts b/src/arm/exynos5420-arndale-octa.dts
index 60bc861d0f9d..9cc83c51c925 100644
--- a/src/arm/exynos5420-arndale-octa.dts
+++ b/src/arm/exynos5420-arndale-octa.dts
@@ -16,12 +16,14 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/clock/samsung,s2mps11.h>
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
 	compatible = "insignal,arndale-octa", "samsung,exynos5420", "samsung,exynos5";
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x80000000>;
 	};
 
@@ -69,6 +71,15 @@
 	status = "disabled";
 };
 
+&hdmi {
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	vdd_osc-supply = <&ldo7_reg>;
+	vdd_pll-supply = <&ldo6_reg>;
+	vdd-supply = <&ldo6_reg>;
+	ddc = <&i2c_2>;
+	status = "okay";
+};
+
 &hsi2c_4 {
 	status = "okay";
 
@@ -346,9 +357,8 @@
 	};
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+&i2c_2 {
+	status = "okay";
 };
 
 &mmc_0 {
@@ -382,9 +392,9 @@
 &pinctrl_0 {
 	s2mps11_irq: s2mps11-irq {
 		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/src/arm/exynos5420-peach-pit.dts b/src/arm/exynos5420-peach-pit.dts
index 1de972d46a87..1f964ec35c5e 100644
--- a/src/arm/exynos5420-peach-pit.dts
+++ b/src/arm/exynos5420-peach-pit.dts
@@ -16,6 +16,7 @@
 #include <dt-bindings/regulator/maxim,max77802.h>
 #include "exynos5420.dtsi"
 #include "exynos5420-cpus.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "Google Peach Pit Rev 6+";
@@ -78,7 +79,8 @@
 		};
 	};
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x80000000>;
 	};
 
@@ -178,7 +180,7 @@
 
 &hdmi {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 	ddc = <&i2c_2>;
@@ -278,7 +280,6 @@
 				regulator-name = "vdd_1v2";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-off-in-suspend;
@@ -301,7 +302,6 @@
 				regulator-name = "vdd_1v35";
 				regulator-min-microvolt = <1350000>;
 				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -323,7 +323,6 @@
 				regulator-name = "vdd_2v";
 				regulator-min-microvolt = <2000000>;
 				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -334,7 +333,6 @@
 				regulator-name = "vdd_1v8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -419,7 +417,6 @@
 				regulator-name = "vdd_ldo9";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-mode = <MAX77802_OPMODE_LP>;
@@ -430,7 +427,6 @@
 				regulator-name = "vdd_ldo10";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
@@ -701,11 +697,7 @@
 	status = "okay";
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-};
-
+/* eMMC flash */
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
@@ -723,6 +715,7 @@
 	bus-width = <8>;
 };
 
+/* WiFi SDIO module */
 &mmc_1 {
 	status = "okay";
 	num-slots = <1>;
@@ -742,6 +735,7 @@
 	vqmmc-supply = <&buck10_reg>;
 };
 
+/* uSD card */
 &mmc_2 {
 	status = "okay";
 	num-slots = <1>;
@@ -763,171 +757,171 @@
 
 	wifi_en: wifi-en {
 		samsung,pins = "gpx0-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	max98090_irq: max98090-irq {
 		samsung,pins = "gpx0-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	/* We need GPX0_6 to be low at sleep time; just keep it low always */
 	mask_tpm_reset: mask-tpm-reset {
 		samsung,pins = "gpx0-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 		samsung,pin-val = <0>;
 	};
 
 	tpm_irq: tpm-irq {
 		samsung,pins = "gpx1-0";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	trackpad_irq: trackpad-irq {
 		samsung,pins = "gpx1-1";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	power_key_irq: power-key-irq {
 		samsung,pins = "gpx1-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	ec_irq: ec-irq {
 		samsung,pins = "gpx1-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	tps65090_irq: tps65090-irq {
 		samsung,pins = "gpx2-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	dp_hpd_gpio: dp_hpd_gpio {
 		samsung,pins = "gpx2-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	max77802_irq: max77802-irq {
 		samsung,pins = "gpx3-1";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	lid_irq: lid-irq {
 		samsung,pins = "gpx3-4";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pmic_dvs_1: pmic-dvs-1 {
 		samsung,pins = "gpy7-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_1 {
 	/* Adjust WiFi drive strengths lower for EMI */
 	sd1_clk: sd1-clk {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	sd1_cmd: sd1-cmd {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	sd1_bus8: sd1-bus-width8 {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 };
 
 &pinctrl_2 {
 	pmic_dvs_2: pmic-dvs-2 {
 		samsung,pins = "gpj4-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pmic_dvs_3: pmic-dvs-3 {
 		samsung,pins = "gpj4-3";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_3 {
 	/* Drive SPI lines at x2 for better integrity */
 	spi2-bus {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	/* Drive SPI chip select at x2 for better integrity */
 	ec_spi_cs: ec-spi-cs {
 		samsung,pins = "gpb1-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	usb300_vbus_en: usb300-vbus-en {
 		samsung,pins = "gph0-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	usb301_vbus_en: usb301-vbus-en {
 		samsung,pins = "gph0-1";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pmic_selb: pmic-selb {
 		samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
 			       "gph0-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
@@ -1053,6 +1047,26 @@
 	status = "okay";
 };
 
+&tmu_cpu0 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+	vtmu-supply = <&ldo10_reg>;
+};
+
 &usbdrd_dwc3_0 {
 	dr_mode = "host";
 };
diff --git a/src/arm/exynos5420-pinctrl.dtsi b/src/arm/exynos5420-pinctrl.dtsi
index 130563b2ca95..3924b4fafe72 100644
--- a/src/arm/exynos5420-pinctrl.dtsi
+++ b/src/arm/exynos5420-pinctrl.dtsi
@@ -12,6 +12,8 @@
  * published by the Free Software Foundation.
 */
 
+#include <dt-bindings/pinctrl/samsung.h>
+
 &pinctrl_0 {
 	gpy7: gpy7 {
 		gpio-controller;
@@ -61,9 +63,9 @@
 
 	dp_hpd: dp_hpd {
 		samsung,pins = "gpx0-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
@@ -153,135 +155,135 @@
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpc0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpc0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_cd: sd0-cd {
 		samsung,pins = "gpc0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_bus1: sd0-bus-width1 {
 		samsung,pins = "gpc0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_bus4: sd0-bus-width4 {
 		samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_bus8: sd0-bus-width8 {
 		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_clk: sd1-clk {
-		samsung,pins = "gpc1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_rclk: sd0-rclk {
 		samsung,pins = "gpc0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpc1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gpc1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd1_cd: sd1-cd {
 		samsung,pins = "gpc1-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd1_int: sd1-int {
 		samsung,pins = "gpd1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
 		samsung,pins = "gpc1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
 		samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd1_bus8: sd1-bus-width8 {
 		samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_clk: sd2-clk {
 		samsung,pins = "gpc2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpc2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_cd: sd2-cd {
 		samsung,pins = "gpc2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_bus1: sd2-bus-width1 {
 		samsung,pins = "gpc2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_bus4: sd2-bus-width4 {
 		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 };
 
@@ -354,52 +356,52 @@
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 			       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 			       "gpe1-0", "gpe1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	cam_gpio_b: cam-gpio-b {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
 			       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	cam_i2c2_bus: cam-i2c2-bus {
 		samsung,pins = "gpf0-4", "gpf0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	cam_spi1_bus: cam-spi1-bus {
 		samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	cam_i2c1_bus: cam-i2c1-bus {
 		samsung,pins = "gpf0-2", "gpf0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	cam_i2c0_bus: cam-i2c0-bus {
 		samsung,pins = "gpf0-0", "gpf0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	cam_spi0_bus: cam-spi0-bus {
 		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	cam_bayrgb_bus: cam-bayrgb-bus {
@@ -408,9 +410,9 @@
 			       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
 			       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
 			       "gpg2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
@@ -489,216 +491,216 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c2_bus: i2c2-bus {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart2_fctl: uart2-fctl {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c3_bus: i2c3-bus {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart3_data: uart3-data {
 		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	spi1_bus: spi1-bus {
 		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c4_hs_bus: i2c4-hs-bus {
 		samsung,pins = "gpa2-0", "gpa2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c5_hs_bus: i2c5-hs-bus {
 		samsung,pins = "gpa2-2", "gpa2-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2s1_bus: i2s1-bus {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pcm1_bus: pcm1-bus {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2s2_bus: i2s2-bus {
 		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
 			       "gpb1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pcm2_bus: pcm2-bus {
 		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
 			       "gpb1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	spdif_bus: spdif-bus {
 		samsung,pins = "gpb1-0", "gpb1-1";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	spi2_bus: spi2-bus {
 		samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
-		samsung,pin-function = <5>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c6_hs_bus: i2c6-hs-bus {
 		samsung,pins = "gpb1-3", "gpb1-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pwm0_out: pwm0-out {
 		samsung,pins = "gpb2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pwm1_out: pwm1-out {
 		samsung,pins = "gpb2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pwm2_out: pwm2-out {
 		samsung,pins = "gpb2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pwm3_out: pwm3-out {
 		samsung,pins = "gpb2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c7_hs_bus: i2c7-hs-bus {
 		samsung,pins = "gpb2-2", "gpb2-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c0_bus: i2c0-bus {
 		samsung,pins = "gpb3-0", "gpb3-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c1_bus: i2c1-bus {
 		samsung,pins = "gpb3-2", "gpb3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c8_hs_bus: i2c8-hs-bus {
 		samsung,pins = "gpb3-4", "gpb3-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c9_hs_bus: i2c9-hs-bus {
 		samsung,pins = "gpb3-6", "gpb3-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c10_hs_bus: i2c10-hs-bus {
 		samsung,pins = "gpb4-0", "gpb4-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
@@ -714,8 +716,8 @@
 	i2s0_bus: i2s0-bus {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4", "gpz-5", "gpz-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
diff --git a/src/arm/exynos5420-smdk5420.dts b/src/arm/exynos5420-smdk5420.dts
index 2e748d19322f..aaccd0da41e5 100644
--- a/src/arm/exynos5420-smdk5420.dts
+++ b/src/arm/exynos5420-smdk5420.dts
@@ -13,12 +13,14 @@
 #include "exynos5420.dtsi"
 #include "exynos5420-cpus.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "Samsung SMDK5420 board based on EXYNOS5420";
 	compatible = "samsung,smdk5420", "samsung,exynos5420", "samsung,exynos5";
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x80000000>;
 	};
 
@@ -129,7 +131,7 @@
 
 &hdmi {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 };
@@ -354,11 +356,6 @@
 	};
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-};
-
 &mmc_0 {
 	status = "okay";
 	broken-cd;
@@ -390,25 +387,25 @@
 &pinctrl_0 {
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_2 {
 	usb300_vbus_en: usb300-vbus-en {
 		samsung,pins = "gpg0-5";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	usb301_vbus_en: usb301-vbus-en {
 		samsung,pins = "gpg1-4";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/src/arm/exynos5420.dtsi b/src/arm/exynos5420.dtsi
index c6e05eb88937..906a1a42a7ea 100644
--- a/src/arm/exynos5420.dtsi
+++ b/src/arm/exynos5420.dtsi
@@ -13,10 +13,10 @@
  * published by the Free Software Foundation.
  */
 
+#include "exynos54xx.dtsi"
 #include <dt-bindings/clock/exynos5420.h>
-#include "exynos5.dtsi"
-
 #include <dt-bindings/clock/exynos-audss-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	compatible = "samsung,exynos5420", "samsung,exynos5";
@@ -30,14 +30,6 @@
 		pinctrl2 = &pinctrl_2;
 		pinctrl3 = &pinctrl_3;
 		pinctrl4 = &pinctrl_4;
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-		i2c2 = &i2c_2;
-		i2c3 = &i2c_3;
-		i2c4 = &hsi2c_4;
-		i2c5 = &hsi2c_5;
-		i2c6 = &hsi2c_6;
-		i2c7 = &hsi2c_7;
 		i2c8 = &hsi2c_8;
 		i2c9 = &hsi2c_9;
 		i2c10 = &hsi2c_10;
@@ -46,118 +38,6 @@
 		spi0 = &spi_0;
 		spi1 = &spi_1;
 		spi2 = &spi_2;
-		usbdrdphy0 = &usbdrd_phy0;
-		usbdrdphy1 = &usbdrd_phy1;
-	};
-
-	cluster_a15_opp_table: opp_table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-		opp@1800000000 {
-			opp-hz = /bits/ 64 <1800000000>;
-			opp-microvolt = <1250000>;
-			clock-latency-ns = <140000>;
-		};
-		opp@1700000000 {
-			opp-hz = /bits/ 64 <1700000000>;
-			opp-microvolt = <1212500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@1600000000 {
-			opp-hz = /bits/ 64 <1600000000>;
-			opp-microvolt = <1175000>;
-			clock-latency-ns = <140000>;
-		};
-		opp@1500000000 {
-			opp-hz = /bits/ 64 <1500000000>;
-			opp-microvolt = <1137500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@1400000000 {
-			opp-hz = /bits/ 64 <1400000000>;
-			opp-microvolt = <1112500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@1300000000 {
-			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1062500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1037500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@1100000000 {
-			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1012500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = < 987500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@900000000 {
-			opp-hz = /bits/ 64 <900000000>;
-			opp-microvolt = < 962500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = < 937500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@700000000 {
-			opp-hz = /bits/ 64 <700000000>;
-			opp-microvolt = < 912500>;
-			clock-latency-ns = <140000>;
-		};
-	};
-
-	cluster_a7_opp_table: opp_table1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-		opp@1300000000 {
-			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1275000>;
-			clock-latency-ns = <140000>;
-		};
-		opp@1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1212500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@1100000000 {
-			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1162500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1112500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@900000000 {
-			opp-hz = /bits/ 64 <900000000>;
-			opp-microvolt = <1062500>;
-			clock-latency-ns = <140000>;
-		};
-		opp@800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1025000>;
-			clock-latency-ns = <140000>;
-		};
-		opp@700000000 {
-			opp-hz = /bits/ 64 <700000000>;
-			opp-microvolt = <975000>;
-			clock-latency-ns = <140000>;
-		};
-		opp@600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <937500>;
-			clock-latency-ns = <140000>;
-		};
 	};
 
 	/*
@@ -165,1434 +45,1270 @@
 	 * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi.
 	 */
 
-	cci: cci@10d20000 {
-		compatible = "arm,cci-400";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x10d20000 0x1000>;
-		ranges = <0x0 0x10d20000 0x6000>;
-
-		cci_control0: slave-if@4000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace";
-			reg = <0x4000 0x1000>;
-		};
-		cci_control1: slave-if@5000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace";
-			reg = <0x5000 0x1000>;
+	soc: soc {
+		cluster_a15_opp_table: opp_table0 {
+			compatible = "operating-points-v2";
+			opp-shared;
+			opp@1800000000 {
+				opp-hz = /bits/ 64 <1800000000>;
+				opp-microvolt = <1250000>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1700000000 {
+				opp-hz = /bits/ 64 <1700000000>;
+				opp-microvolt = <1212500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1600000000 {
+				opp-hz = /bits/ 64 <1600000000>;
+				opp-microvolt = <1175000>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1500000000 {
+				opp-hz = /bits/ 64 <1500000000>;
+				opp-microvolt = <1137500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1400000000 {
+				opp-hz = /bits/ 64 <1400000000>;
+				opp-microvolt = <1112500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1300000000 {
+				opp-hz = /bits/ 64 <1300000000>;
+				opp-microvolt = <1062500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1200000000 {
+				opp-hz = /bits/ 64 <1200000000>;
+				opp-microvolt = <1037500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1100000000 {
+				opp-hz = /bits/ 64 <1100000000>;
+				opp-microvolt = <1012500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1000000000 {
+				opp-hz = /bits/ 64 <1000000000>;
+				opp-microvolt = < 987500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@900000000 {
+				opp-hz = /bits/ 64 <900000000>;
+				opp-microvolt = < 962500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@800000000 {
+				opp-hz = /bits/ 64 <800000000>;
+				opp-microvolt = < 937500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@700000000 {
+				opp-hz = /bits/ 64 <700000000>;
+				opp-microvolt = < 912500>;
+				clock-latency-ns = <140000>;
+			};
+		};
+
+		cluster_a7_opp_table: opp_table1 {
+			compatible = "operating-points-v2";
+			opp-shared;
+			opp@1300000000 {
+				opp-hz = /bits/ 64 <1300000000>;
+				opp-microvolt = <1275000>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1200000000 {
+				opp-hz = /bits/ 64 <1200000000>;
+				opp-microvolt = <1212500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1100000000 {
+				opp-hz = /bits/ 64 <1100000000>;
+				opp-microvolt = <1162500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1000000000 {
+				opp-hz = /bits/ 64 <1000000000>;
+				opp-microvolt = <1112500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@900000000 {
+				opp-hz = /bits/ 64 <900000000>;
+				opp-microvolt = <1062500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@800000000 {
+				opp-hz = /bits/ 64 <800000000>;
+				opp-microvolt = <1025000>;
+				clock-latency-ns = <140000>;
+			};
+			opp@700000000 {
+				opp-hz = /bits/ 64 <700000000>;
+				opp-microvolt = <975000>;
+				clock-latency-ns = <140000>;
+			};
+			opp@600000000 {
+				opp-hz = /bits/ 64 <600000000>;
+				opp-microvolt = <937500>;
+				clock-latency-ns = <140000>;
+			};
+		};
+
+		cci: cci@10d20000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x10d20000 0x1000>;
+			ranges = <0x0 0x10d20000 0x6000>;
+
+			cci_control0: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+			cci_control1: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+		};
+
+		clock: clock-controller@10010000 {
+			compatible = "samsung,exynos5420-clock";
+			reg = <0x10010000 0x30000>;
+			#clock-cells = <1>;
+		};
+
+		clock_audss: audss-clock-controller@3810000 {
+			compatible = "samsung,exynos5420-audss-clock";
+			reg = <0x03810000 0x0C>;
+			#clock-cells = <1>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
+				 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
+			clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
+		};
+
+		mfc: codec@11000000 {
+			compatible = "samsung,mfc-v7";
+			reg = <0x11000000 0x10000>;
+			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MFC>;
+			clock-names = "mfc";
+			power-domains = <&mfc_pd>;
+			iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+			iommu-names = "left", "right";
+		};
+
+		mmc_0: mmc@12200000 {
+			compatible = "samsung,exynos5420-dw-mshc-smu";
+			interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12200000 0x2000>;
+			clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
 		};
-	};
-
-	sysram@02020000 {
-		compatible = "mmio-sram";
-		reg = <0x02020000 0x54000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x02020000 0x54000>;
 
-		smp-sysram@0 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x0 0x1000>;
+		mmc_1: mmc@12210000 {
+			compatible = "samsung,exynos5420-dw-mshc-smu";
+			interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12210000 0x2000>;
+			clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
 		};
 
-		smp-sysram@53000 {
-			compatible = "samsung,exynos4210-sysram-ns";
-			reg = <0x53000 0x1000>;
+		mmc_2: mmc@12220000 {
+			compatible = "samsung,exynos5420-dw-mshc";
+			interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12220000 0x1000>;
+			clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
 		};
-	};
-
-	clock: clock-controller@10010000 {
-		compatible = "samsung,exynos5420-clock";
-		reg = <0x10010000 0x30000>;
-		#clock-cells = <1>;
-	};
 
-	clock_audss: audss-clock-controller@3810000 {
-		compatible = "samsung,exynos5420-audss-clock";
-		reg = <0x03810000 0x0C>;
-		#clock-cells = <1>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
-			 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
-		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
-	};
-
-	mfc: codec@11000000 {
-		compatible = "samsung,mfc-v7";
-		reg = <0x11000000 0x10000>;
-		interrupts = <0 96 0>;
-		clocks = <&clock CLK_MFC>;
-		clock-names = "mfc";
-		power-domains = <&mfc_pd>;
-		iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
-		iommu-names = "left", "right";
-	};
+		nocp_mem0_0: nocp@10CA1000 {
+			compatible = "samsung,exynos5420-nocp";
+			reg = <0x10CA1000 0x200>;
+			status = "disabled";
+		};
 
-	mmc_0: mmc@12200000 {
-		compatible = "samsung,exynos5420-dw-mshc-smu";
-		interrupts = <0 75 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12200000 0x2000>;
-		clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x40>;
-		status = "disabled";
-	};
+		nocp_mem0_1: nocp@10CA1400 {
+			compatible = "samsung,exynos5420-nocp";
+			reg = <0x10CA1400 0x200>;
+			status = "disabled";
+		};
 
-	mmc_1: mmc@12210000 {
-		compatible = "samsung,exynos5420-dw-mshc-smu";
-		interrupts = <0 76 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12210000 0x2000>;
-		clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x40>;
-		status = "disabled";
-	};
+		nocp_mem1_0: nocp@10CA1800 {
+			compatible = "samsung,exynos5420-nocp";
+			reg = <0x10CA1800 0x200>;
+			status = "disabled";
+		};
 
-	mmc_2: mmc@12220000 {
-		compatible = "samsung,exynos5420-dw-mshc";
-		interrupts = <0 77 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12220000 0x1000>;
-		clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x40>;
-		status = "disabled";
-	};
+		nocp_mem1_1: nocp@10CA1C00 {
+			compatible = "samsung,exynos5420-nocp";
+			reg = <0x10CA1C00 0x200>;
+			status = "disabled";
+		};
 
-	mct: mct@101C0000 {
-		compatible = "samsung,exynos4210-mct";
-		reg = <0x101C0000 0x800>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		interrupt-parent = <&mct_map>;
-		interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
-				<8>, <9>, <10>, <11>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-		clock-names = "fin_pll", "mct";
-
-		mct_map: mct-map {
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0 &combiner 23 3>,
-					<1 &combiner 23 4>,
-					<2 &combiner 25 2>,
-					<3 &combiner 25 3>,
-					<4 &gic 0 120 0>,
-					<5 &gic 0 121 0>,
-					<6 &gic 0 122 0>,
-					<7 &gic 0 123 0>,
-					<8 &gic 0 128 0>,
-					<9 &gic 0 129 0>,
-					<10 &gic 0 130 0>,
-					<11 &gic 0 131 0>;
+		nocp_g3d_0: nocp@11A51000 {
+			compatible = "samsung,exynos5420-nocp";
+			reg = <0x11A51000 0x200>;
+			status = "disabled";
 		};
-	};
 
-	nocp_mem0_0: nocp@10CA1000 {
-		compatible = "samsung,exynos5420-nocp";
-		reg = <0x10CA1000 0x200>;
-		status = "disabled";
-	};
+		nocp_g3d_1: nocp@11A51400 {
+			compatible = "samsung,exynos5420-nocp";
+			reg = <0x11A51400 0x200>;
+			status = "disabled";
+		};
 
-	nocp_mem0_1: nocp@10CA1400 {
-		compatible = "samsung,exynos5420-nocp";
-		reg = <0x10CA1400 0x200>;
-		status = "disabled";
-	};
+		gsc_pd: power-domain@10044000 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044000 0x20>;
+			#power-domain-cells = <0>;
+			clocks = <&clock CLK_FIN_PLL>,
+				 <&clock CLK_MOUT_USER_ACLK300_GSCL>,
+				 <&clock CLK_GSCL0>, <&clock CLK_GSCL1>;
+			clock-names = "oscclk", "clk0", "asb0", "asb1";
+		};
 
-	nocp_mem1_0: nocp@10CA1800 {
-		compatible = "samsung,exynos5420-nocp";
-		reg = <0x10CA1800 0x200>;
-		status = "disabled";
-	};
+		isp_pd: power-domain@10044020 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044020 0x20>;
+			#power-domain-cells = <0>;
+		};
 
-	nocp_mem1_1: nocp@10CA1C00 {
-		compatible = "samsung,exynos5420-nocp";
-		reg = <0x10CA1C00 0x200>;
-		status = "disabled";
-	};
+		mfc_pd: power-domain@10044060 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044060 0x20>;
+			clocks = <&clock CLK_FIN_PLL>,
+				 <&clock CLK_MOUT_USER_ACLK333>,
+				 <&clock CLK_ACLK333>;
+			clock-names = "oscclk", "clk0","asb0";
+			#power-domain-cells = <0>;
+		};
 
-	nocp_g3d_0: nocp@11A51000 {
-		compatible = "samsung,exynos5420-nocp";
-		reg = <0x11A51000 0x200>;
-		status = "disabled";
-	};
+		msc_pd: power-domain@10044120 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044120 0x20>;
+			#power-domain-cells = <0>;
+		};
 
-	nocp_g3d_1: nocp@11A51400 {
-		compatible = "samsung,exynos5420-nocp";
-		reg = <0x11A51400 0x200>;
-		status = "disabled";
-	};
+		disp_pd: power-domain@100440C0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x100440C0 0x20>;
+			#power-domain-cells = <0>;
+			clocks = <&clock CLK_FIN_PLL>,
+				 <&clock CLK_MOUT_USER_ACLK200_DISP1>,
+				 <&clock CLK_MOUT_USER_ACLK300_DISP1>,
+				 <&clock CLK_MOUT_USER_ACLK400_DISP1>,
+				 <&clock CLK_FIMD1>, <&clock CLK_MIXER>;
+			clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1";
+		};
 
-	gsc_pd: power-domain@10044000 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044000 0x20>;
-		#power-domain-cells = <0>;
-		clocks = <&clock CLK_FIN_PLL>,
-			 <&clock CLK_MOUT_USER_ACLK300_GSCL>,
-			 <&clock CLK_GSCL0>, <&clock CLK_GSCL1>;
-		clock-names = "oscclk", "clk0", "asb0", "asb1";
-	};
+		pinctrl_0: pinctrl@13400000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x13400000 0x1000>;
+			interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
 
-	isp_pd: power-domain@10044020 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044020 0x20>;
-		#power-domain-cells = <0>;
-	};
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
 
-	mfc_pd: power-domain@10044060 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044060 0x20>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>;
-		clock-names = "oscclk", "clk0";
-		#power-domain-cells = <0>;
-	};
+		pinctrl_1: pinctrl@13410000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x13410000 0x1000>;
+			interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-	msc_pd: power-domain@10044120 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044120 0x20>;
-		#power-domain-cells = <0>;
-	};
+		pinctrl_2: pinctrl@14000000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x14000000 0x1000>;
+			interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-	disp_pd: power-domain@100440C0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x100440C0 0x20>;
-		#power-domain-cells = <0>;
-		clocks = <&clock CLK_FIN_PLL>,
-			 <&clock CLK_MOUT_USER_ACLK200_DISP1>,
-			 <&clock CLK_MOUT_USER_ACLK300_DISP1>,
-			 <&clock CLK_MOUT_USER_ACLK400_DISP1>,
-			 <&clock CLK_FIMD1>, <&clock CLK_MIXER>;
-		clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1";
-	};
+		pinctrl_3: pinctrl@14010000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x14010000 0x1000>;
+			interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-	pinctrl_0: pinctrl@13400000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x13400000 0x1000>;
-		interrupts = <0 45 0>;
+		pinctrl_4: pinctrl@03860000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x03860000 0x1000>;
+			interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-		wakeup-interrupt-controller {
-			compatible = "samsung,exynos4210-wakeup-eint";
+		amba {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
 			interrupt-parent = <&gic>;
-			interrupts = <0 32 0>;
+			ranges;
+
+			adma: adma@03880000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x03880000 0x1000>;
+				interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock_audss EXYNOS_ADMA>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <6>;
+				#dma-requests = <16>;
+			};
+
+			pdma0: pdma@121A0000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x121A0000 0x1000>;
+				interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock CLK_PDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			pdma1: pdma@121B0000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x121B0000 0x1000>;
+				interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock CLK_PDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			mdma0: mdma@10800000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x10800000 0x1000>;
+				interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock CLK_MDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <1>;
+			};
+
+			mdma1: mdma@11C10000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x11C10000 0x1000>;
+				interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock CLK_MDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <1>;
+				/*
+				 * MDMA1 can support both secure and non-secure
+				 * AXI transactions. When this is enabled in
+				 * the kernel for boards that run in secure
+				 * mode, we are getting imprecise external
+				 * aborts causing the kernel to oops.
+				 */
+				status = "disabled";
+			};
+		};
+
+		i2s0: i2s@03830000 {
+			compatible = "samsung,exynos5420-i2s";
+			reg = <0x03830000 0x100>;
+			dmas = <&adma 0
+				&adma 2
+				&adma 1>;
+			dma-names = "tx", "rx", "tx-sec";
+			clocks = <&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_SCLK_I2S>;
+			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk0";
+			#sound-dai-cells = <1>;
+			samsung,idma-addr = <0x03000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_bus>;
+			status = "disabled";
 		};
-	};
-
-	pinctrl_1: pinctrl@13410000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x13410000 0x1000>;
-		interrupts = <0 78 0>;
-	};
 
-	pinctrl_2: pinctrl@14000000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x14000000 0x1000>;
-		interrupts = <0 46 0>;
-	};
-
-	pinctrl_3: pinctrl@14010000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x14010000 0x1000>;
-		interrupts = <0 50 0>;
-	};
-
-	pinctrl_4: pinctrl@03860000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x03860000 0x1000>;
-		interrupts = <0 47 0>;
-	};
-
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		adma: adma@03880000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x03880000 0x1000>;
-			interrupts = <0 110 0>;
-			clocks = <&clock_audss EXYNOS_ADMA>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <6>;
-			#dma-requests = <16>;
-		};
-
-		pdma0: pdma@121A0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121A0000 0x1000>;
-			interrupts = <0 34 0>;
-			clocks = <&clock CLK_PDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		pdma1: pdma@121B0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121B0000 0x1000>;
-			interrupts = <0 35 0>;
-			clocks = <&clock CLK_PDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		mdma0: mdma@10800000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x10800000 0x1000>;
-			interrupts = <0 33 0>;
-			clocks = <&clock CLK_MDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
-		};
-
-		mdma1: mdma@11C10000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x11C10000 0x1000>;
-			interrupts = <0 124 0>;
-			clocks = <&clock CLK_MDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
-			/*
-			 * MDMA1 can support both secure and non-secure
-			 * AXI transactions. When this is enabled in the kernel
-			 * for boards that run in secure mode, we are getting
-			 * imprecise external aborts causing the kernel to oops.
-			 */
+		i2s1: i2s@12D60000 {
+			compatible = "samsung,exynos5420-i2s";
+			reg = <0x12D60000 0x100>;
+			dmas = <&pdma1 12
+				&pdma1 11>;
+			dma-names = "tx", "rx";
+			clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
+			clock-names = "iis", "i2s_opclk0";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk1";
+			#sound-dai-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s1_bus>;
 			status = "disabled";
 		};
-	};
-
-	i2s0: i2s@03830000 {
-		compatible = "samsung,exynos5420-i2s";
-		reg = <0x03830000 0x100>;
-		dmas = <&adma 0
-			&adma 2
-			&adma 1>;
-		dma-names = "tx", "rx", "tx-sec";
-		clocks = <&clock_audss EXYNOS_I2S_BUS>,
-			<&clock_audss EXYNOS_I2S_BUS>,
-			<&clock_audss EXYNOS_SCLK_I2S>;
-		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-		#clock-cells = <1>;
-		clock-output-names = "i2s_cdclk0";
-		#sound-dai-cells = <1>;
-		samsung,idma-addr = <0x03000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s0_bus>;
-		status = "disabled";
-	};
-
-	i2s1: i2s@12D60000 {
-		compatible = "samsung,exynos5420-i2s";
-		reg = <0x12D60000 0x100>;
-		dmas = <&pdma1 12
-			&pdma1 11>;
-		dma-names = "tx", "rx";
-		clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
-		clock-names = "iis", "i2s_opclk0";
-		#clock-cells = <1>;
-		clock-output-names = "i2s_cdclk1";
-		#sound-dai-cells = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s1_bus>;
-		status = "disabled";
-	};
-
-	i2s2: i2s@12D70000 {
-		compatible = "samsung,exynos5420-i2s";
-		reg = <0x12D70000 0x100>;
-		dmas = <&pdma0 12
-			&pdma0 11>;
-		dma-names = "tx", "rx";
-		clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
-		clock-names = "iis", "i2s_opclk0";
-		#clock-cells = <1>;
-		clock-output-names = "i2s_cdclk2";
-		#sound-dai-cells = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s2_bus>;
-		status = "disabled";
-	};
-
-	spi_0: spi@12d20000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x12d20000 0x100>;
-		interrupts = <0 68 0>;
-		dmas = <&pdma0 5
-			&pdma0 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi0_bus>;
-		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
-		clock-names = "spi", "spi_busclk0";
-		status = "disabled";
-	};
-
-	spi_1: spi@12d30000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x12d30000 0x100>;
-		interrupts = <0 69 0>;
-		dmas = <&pdma1 5
-			&pdma1 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi1_bus>;
-		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
-		clock-names = "spi", "spi_busclk0";
-		status = "disabled";
-	};
-
-	spi_2: spi@12d40000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x12d40000 0x100>;
-		interrupts = <0 70 0>;
-		dmas = <&pdma0 7
-			&pdma0 6>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_bus>;
-		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
-		clock-names = "spi", "spi_busclk0";
-		status = "disabled";
-	};
-
-	pwm: pwm@12dd0000 {
-		compatible = "samsung,exynos4210-pwm";
-		reg = <0x12dd0000 0x100>;
-		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
-		#pwm-cells = <3>;
-		clocks = <&clock CLK_PWM>;
-		clock-names = "timers";
-	};
-
-	dp_phy: dp-video-phy {
-		compatible = "samsung,exynos5420-dp-video-phy";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <0>;
-	};
-
-	mipi_phy: mipi-video-phy {
-		compatible = "samsung,s5pv210-mipi-video-phy";
-		syscon = <&pmu_system_controller>;
-		#phy-cells = <1>;
-	};
-
-	dsi@14500000 {
-		compatible = "samsung,exynos5410-mipi-dsi";
-		reg = <0x14500000 0x10000>;
-		interrupts = <0 82 0>;
-		phys = <&mipi_phy 1>;
-		phy-names = "dsim";
-		clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
-		clock-names = "bus_clk", "pll_clk";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	adc: adc@12D10000 {
-		compatible = "samsung,exynos-adc-v2";
-		reg = <0x12D10000 0x100>;
-		interrupts = <0 106 0>;
-		clocks = <&clock CLK_TSADC>;
-		clock-names = "adc";
-		#io-channel-cells = <1>;
-		io-channel-ranges;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		status = "disabled";
-	};
-
-	i2c_0: i2c@12C60000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C60000 0x100>;
-		interrupts = <0 56 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C0>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
-
-	i2c_1: i2c@12C70000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C70000 0x100>;
-		interrupts = <0 57 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C1>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
-
-	i2c_2: i2c@12C80000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C80000 0x100>;
-		interrupts = <0 58 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C2>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
-
-	i2c_3: i2c@12C90000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C90000 0x100>;
-		interrupts = <0 59 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C3>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c3_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
 
-	hsi2c_4: i2c@12CA0000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CA0000 0x1000>;
-		interrupts = <0 60 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c4_hs_bus>;
-		clocks = <&clock CLK_USI0>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
-
-	hsi2c_5: i2c@12CB0000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CB0000 0x1000>;
-		interrupts = <0 61 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c5_hs_bus>;
-		clocks = <&clock CLK_USI1>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
-
-	hsi2c_6: i2c@12CC0000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CC0000 0x1000>;
-		interrupts = <0 62 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c6_hs_bus>;
-		clocks = <&clock CLK_USI2>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
-
-	hsi2c_7: i2c@12CD0000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CD0000 0x1000>;
-		interrupts = <0 63 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c7_hs_bus>;
-		clocks = <&clock CLK_USI3>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
-
-	hsi2c_8: i2c@12E00000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12E00000 0x1000>;
-		interrupts = <0 87 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c8_hs_bus>;
-		clocks = <&clock CLK_USI4>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
-
-	hsi2c_9: i2c@12E10000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12E10000 0x1000>;
-		interrupts = <0 88 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c9_hs_bus>;
-		clocks = <&clock CLK_USI5>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
-
-	hsi2c_10: i2c@12E20000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12E20000 0x1000>;
-		interrupts = <0 203 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c10_hs_bus>;
-		clocks = <&clock CLK_USI6>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
-
-	hdmi: hdmi@14530000 {
-		compatible = "samsung,exynos5420-hdmi";
-		reg = <0x14530000 0x70000>;
-		interrupts = <0 95 0>;
-		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
-			 <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
-			 <&clock CLK_MOUT_HDMI>;
-		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
-			"sclk_hdmiphy", "mout_hdmi";
-		phy = <&hdmiphy>;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		status = "disabled";
-		power-domains = <&disp_pd>;
-	};
-
-	hdmiphy: hdmiphy@145D0000 {
-		reg = <0x145D0000 0x20>;
-	};
-
-	mixer: mixer@14450000 {
-		compatible = "samsung,exynos5420-mixer";
-		reg = <0x14450000 0x10000>;
-		interrupts = <0 94 0>;
-		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-			 <&clock CLK_SCLK_HDMI>;
-		clock-names = "mixer", "hdmi", "sclk_hdmi";
-		power-domains = <&disp_pd>;
-		iommus = <&sysmmu_tv>;
-	};
-
-	rotator: rotator@11C00000 {
-		compatible = "samsung,exynos5250-rotator";
-		reg = <0x11C00000 0x64>;
-		interrupts = <0 84 0>;
-		clocks = <&clock CLK_ROTATOR>;
-		clock-names = "rotator";
-		iommus = <&sysmmu_rotator>;
-	};
-
-	gsc_0: video-scaler@13e00000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e00000 0x1000>;
-		interrupts = <0 85 0>;
-		clocks = <&clock CLK_GSCL0>;
-		clock-names = "gscl";
-		power-domains = <&gsc_pd>;
-		iommus = <&sysmmu_gscl0>;
-	};
-
-	gsc_1: video-scaler@13e10000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e10000 0x1000>;
-		interrupts = <0 86 0>;
-		clocks = <&clock CLK_GSCL1>;
-		clock-names = "gscl";
-		power-domains = <&gsc_pd>;
-		iommus = <&sysmmu_gscl1>;
-	};
-
-	jpeg_0: jpeg@11F50000 {
-		compatible = "samsung,exynos5420-jpeg";
-		reg = <0x11F50000 0x1000>;
-		interrupts = <0 89 0>;
-		clock-names = "jpeg";
-		clocks = <&clock CLK_JPEG>;
-		iommus = <&sysmmu_jpeg0>;
-	};
-
-	jpeg_1: jpeg@11F60000 {
-		compatible = "samsung,exynos5420-jpeg";
-		reg = <0x11F60000 0x1000>;
-		interrupts = <0 168 0>;
-		clock-names = "jpeg";
-		clocks = <&clock CLK_JPEG2>;
-		iommus = <&sysmmu_jpeg1>;
-	};
-
-	pmu_system_controller: system-controller@10040000 {
-		compatible = "samsung,exynos5420-pmu", "syscon";
-		reg = <0x10040000 0x5000>;
-		clock-names = "clkout16";
-		clocks = <&clock CLK_FIN_PLL>;
-		#clock-cells = <1>;
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-	};
-
-	sysreg_system_controller: syscon@10050000 {
-		compatible = "samsung,exynos5-sysreg", "syscon";
-		reg = <0x10050000 0x5000>;
-	};
-
-	tmu_cpu0: tmu@10060000 {
-		compatible = "samsung,exynos5420-tmu";
-		reg = <0x10060000 0x100>;
-		interrupts = <0 65 0>;
-		clocks = <&clock CLK_TMU>;
-		clock-names = "tmu_apbif";
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
-
-	tmu_cpu1: tmu@10064000 {
-		compatible = "samsung,exynos5420-tmu";
-		reg = <0x10064000 0x100>;
-		interrupts = <0 183 0>;
-		clocks = <&clock CLK_TMU>;
-		clock-names = "tmu_apbif";
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
-
-	tmu_cpu2: tmu@10068000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x10068000 0x100>, <0x1006c000 0x4>;
-		interrupts = <0 184 0>;
-		clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
-
-	tmu_cpu3: tmu@1006c000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
-		interrupts = <0 185 0>;
-		clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
-
-	tmu_gpu: tmu@100a0000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x100a0000 0x100>, <0x10068000 0x4>;
-		interrupts = <0 215 0>;
-		clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
-
-	thermal-zones {
-		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0>;
-			#include "exynos5420-trip-points.dtsi"
-		};
-		cpu1_thermal: cpu1-thermal {
-		       thermal-sensors = <&tmu_cpu1>;
-		       #include "exynos5420-trip-points.dtsi"
-		};
-		cpu2_thermal: cpu2-thermal {
-		       thermal-sensors = <&tmu_cpu2>;
-		       #include "exynos5420-trip-points.dtsi"
-		};
-		cpu3_thermal: cpu3-thermal {
-		       thermal-sensors = <&tmu_cpu3>;
-		       #include "exynos5420-trip-points.dtsi"
-		};
-		gpu_thermal: gpu-thermal {
-		       thermal-sensors = <&tmu_gpu>;
-		       #include "exynos5420-trip-points.dtsi"
+		i2s2: i2s@12D70000 {
+			compatible = "samsung,exynos5420-i2s";
+			reg = <0x12D70000 0x100>;
+			dmas = <&pdma0 12
+				&pdma0 11>;
+			dma-names = "tx", "rx";
+			clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
+			clock-names = "iis", "i2s_opclk0";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk2";
+			#sound-dai-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s2_bus>;
+			status = "disabled";
 		};
-	};
 
-        watchdog: watchdog@101D0000 {
-		compatible = "samsung,exynos5420-wdt";
-		reg = <0x101D0000 0x100>;
-		interrupts = <0 42 0>;
-		clocks = <&clock CLK_WDT>;
-		clock-names = "watchdog";
-		samsung,syscon-phandle = <&pmu_system_controller>;
-        };
-
-	sss: sss@10830000 {
-		compatible = "samsung,exynos4210-secss";
-		reg = <0x10830000 0x300>;
-		interrupts = <0 112 0>;
-		clocks = <&clock CLK_SSS>;
-		clock-names = "secss";
-	};
-
-	usbdrd3_0: usb3-0 {
-		compatible = "samsung,exynos5250-dwusb3";
-		clocks = <&clock CLK_USBD300>;
-		clock-names = "usbdrd30";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		usbdrd_dwc3_0: dwc3@12000000 {
-			compatible = "snps,dwc3";
-			reg = <0x12000000 0x10000>;
-			interrupts = <0 72 0>;
-			phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
-			phy-names = "usb2-phy", "usb3-phy";
+		spi_0: spi@12d20000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x12d20000 0x100>;
+			interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 5
+				&pdma0 4>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			status = "disabled";
 		};
-	};
-
-	usbdrd_phy0: phy@12100000 {
-		compatible = "samsung,exynos5420-usbdrd-phy";
-		reg = <0x12100000 0x100>;
-		clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
-		clock-names = "phy", "ref";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <1>;
-	};
 
-	usbdrd3_1: usb3-1 {
-		compatible = "samsung,exynos5250-dwusb3";
-		clocks = <&clock CLK_USBD301>;
-		clock-names = "usbdrd30";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		usbdrd_dwc3_1: dwc3@12400000 {
-			compatible = "snps,dwc3";
-			reg = <0x12400000 0x10000>;
-			interrupts = <0 73 0>;
-			phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
-			phy-names = "usb2-phy", "usb3-phy";
+		spi_1: spi@12d30000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x12d30000 0x100>;
+			interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 5
+				&pdma1 4>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			status = "disabled";
 		};
-	};
-
-	usbdrd_phy1: phy@12500000 {
-		compatible = "samsung,exynos5420-usbdrd-phy";
-		reg = <0x12500000 0x100>;
-		clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
-		clock-names = "phy", "ref";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <1>;
-	};
-
-	usbhost2: usb@12110000 {
-		compatible = "samsung,exynos4210-ehci";
-		reg = <0x12110000 0x100>;
-		interrupts = <0 71 0>;
 
-		clocks = <&clock CLK_USBH20>;
-		clock-names = "usbhost";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			phys = <&usb2_phy 1>;
+		spi_2: spi@12d40000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x12d40000 0x100>;
+			interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 7
+				&pdma0 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_bus>;
+			clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
+			clock-names = "spi", "spi_busclk0";
+			status = "disabled";
 		};
-	};
 
-	usbhost1: usb@12120000 {
-		compatible = "samsung,exynos4210-ohci";
-		reg = <0x12120000 0x100>;
-		interrupts = <0 71 0>;
-
-		clocks = <&clock CLK_USBH20>;
-		clock-names = "usbhost";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			phys = <&usb2_phy 1>;
+		dp_phy: dp-video-phy {
+			compatible = "samsung,exynos5420-dp-video-phy";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
 		};
-	};
-
-	usb2_phy: phy@12130000 {
-		compatible = "samsung,exynos5250-usb2-phy";
-		reg = <0x12130000 0x100>;
-		clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
-		clock-names = "phy", "ref";
-		#phy-cells = <1>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		samsung,pmureg-phandle = <&pmu_system_controller>;
-	};
-
-	sysmmu_g2dr: sysmmu@0x10A60000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x10A60000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <24 5>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_g2dw: sysmmu@0x10A70000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x10A70000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <22 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_tv: sysmmu@0x14650000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x14650000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <7 4>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>;
-		power-domains = <&disp_pd>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_gscl0: sysmmu@0x13E80000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13E80000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
-		power-domains = <&gsc_pd>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_gscl1: sysmmu@0x13E90000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13E90000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
-		power-domains = <&gsc_pd>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_scaler0r: sysmmu@0x12880000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x12880000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <22 4>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_scaler1r: sysmmu@0x12890000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x12890000 0x1000>;
-		interrupts = <0 186 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
-		#iommu-cells = <0>;
-	};
 
-	sysmmu_scaler2r: sysmmu@0x128A0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x128A0000 0x1000>;
-		interrupts = <0 188 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_scaler0w: sysmmu@0x128C0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x128C0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <27 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_scaler1w: sysmmu@0x128D0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x128D0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <22 6>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_scaler2w: sysmmu@0x128E0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x128E0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <19 6>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_rotator: sysmmu@0x11D40000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11D40000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_jpeg0: sysmmu@0x11F10000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11F10000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_jpeg1: sysmmu@0x11F20000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11F20000 0x1000>;
-		interrupts = <0 169 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_mfc_l: sysmmu@0x11200000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11200000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <6 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
-		power-domains = <&mfc_pd>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_mfc_r: sysmmu@0x11210000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11210000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <8 5>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
-		power-domains = <&mfc_pd>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_fimd1_0: sysmmu@0x14640000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x14640000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <3 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
-		power-domains = <&disp_pd>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_fimd1_1: sysmmu@0x14680000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x14680000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <3 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>;
-		power-domains = <&disp_pd>;
-		#iommu-cells = <0>;
-	};
-
-	bus_wcore: bus_wcore {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_wcore_opp_table>;
-		status = "disabled";
-	};
-
-	bus_noc: bus_noc {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK100_NOC>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_noc_opp_table>;
-		status = "disabled";
-	};
-
-	bus_fsys_apb: bus_fsys_apb {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_fsys_apb_opp_table>;
-		status = "disabled";
-	};
-
-	bus_fsys: bus_fsys {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_fsys_apb_opp_table>;
-		status = "disabled";
-	};
-
-	bus_fsys2: bus_fsys2 {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_fsys2_opp_table>;
-		status = "disabled";
-	};
-
-	bus_mfc: bus_mfc {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK333>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_mfc_opp_table>;
-		status = "disabled";
-	};
-
-	bus_gen: bus_gen {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK266>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_gen_opp_table>;
-		status = "disabled";
-	};
-
-	bus_peri: bus_peri {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK66>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_peri_opp_table>;
-		status = "disabled";
-	};
-
-	bus_g2d: bus_g2d {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK333_G2D>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_g2d_opp_table>;
-		status = "disabled";
-	};
-
-	bus_g2d_acp: bus_g2d_acp {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK266_G2D>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_g2d_acp_opp_table>;
-		status = "disabled";
-	};
-
-	bus_jpeg: bus_jpeg {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_jpeg_opp_table>;
-		status = "disabled";
-	};
-
-	bus_jpeg_apb: bus_jpeg_apb {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK166>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_jpeg_apb_opp_table>;
-		status = "disabled";
-	};
-
-	bus_disp1_fimd: bus_disp1_fimd {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_disp1_fimd_opp_table>;
-		status = "disabled";
-	};
-
-	bus_disp1: bus_disp1 {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_disp1_opp_table>;
-		status = "disabled";
-	};
-
-	bus_gscl_scaler: bus_gscl_scaler {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_gscl_opp_table>;
-		status = "disabled";
-	};
-
-	bus_mscl: bus_mscl {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_mscl_opp_table>;
-		status = "disabled";
-	};
-
-	bus_wcore_opp_table: opp_table2 {
-		compatible = "operating-points-v2";
-
-		opp00 {
-			opp-hz = /bits/ 64 <84000000>;
-			opp-microvolt = <925000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <111000000>;
-			opp-microvolt = <950000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <222000000>;
-			opp-microvolt = <950000>;
+		mipi_phy: mipi-video-phy {
+			compatible = "samsung,s5pv210-mipi-video-phy";
+			syscon = <&pmu_system_controller>;
+			#phy-cells = <1>;
 		};
-		opp03 {
-			opp-hz = /bits/ 64 <333000000>;
-			opp-microvolt = <950000>;
-		};
-		opp04 {
-			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <987500>;
-		};
-	};
 
-	bus_noc_opp_table: opp_table3 {
-		compatible = "operating-points-v2";
-
-		opp00 {
-			opp-hz = /bits/ 64 <67000000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <75000000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <86000000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <100000000>;
+		dsi@14500000 {
+			compatible = "samsung,exynos5410-mipi-dsi";
+			reg = <0x14500000 0x10000>;
+			interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&mipi_phy 1>;
+			phy-names = "dsim";
+			clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
+			clock-names = "bus_clk", "pll_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
 		};
-	};
-
-	bus_fsys_apb_opp_table: opp_table4 {
-		compatible = "operating-points-v2";
-		opp-shared;
 
-		opp00 {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <200000000>;
+		adc: adc@12D10000 {
+			compatible = "samsung,exynos-adc-v2";
+			reg = <0x12D10000 0x100>;
+			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TSADC>;
+			clock-names = "adc";
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
 		};
-	};
-
-	bus_fsys2_opp_table: opp_table5 {
-		compatible = "operating-points-v2";
 
-		opp00 {
-			opp-hz = /bits/ 64 <75000000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <150000000>;
+		hsi2c_8: i2c@12E00000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12E00000 0x1000>;
+			interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c8_hs_bus>;
+			clocks = <&clock CLK_USI4>;
+			clock-names = "hsi2c";
+			status = "disabled";
 		};
-	};
 
-	bus_mfc_opp_table: opp_table6 {
-		compatible = "operating-points-v2";
-
-		opp00 {
-			opp-hz = /bits/ 64 <96000000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <111000000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <167000000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <222000000>;
-		};
-		opp04 {
-			opp-hz = /bits/ 64 <333000000>;
+		hsi2c_9: i2c@12E10000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12E10000 0x1000>;
+			interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c9_hs_bus>;
+			clocks = <&clock CLK_USI5>;
+			clock-names = "hsi2c";
+			status = "disabled";
 		};
-	};
 
-	bus_gen_opp_table: opp_table7 {
-		compatible = "operating-points-v2";
-
-		opp00 {
-			opp-hz = /bits/ 64 <89000000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <133000000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <178000000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <267000000>;
+		hsi2c_10: i2c@12E20000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12E20000 0x1000>;
+			interrupts = <0 203 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c10_hs_bus>;
+			clocks = <&clock CLK_USI6>;
+			clock-names = "hsi2c";
+			status = "disabled";
 		};
-	};
-
-	bus_peri_opp_table: opp_table8 {
-		compatible = "operating-points-v2";
 
-		opp00 {
-			opp-hz = /bits/ 64 <67000000>;
+		hdmi: hdmi@14530000 {
+			compatible = "samsung,exynos5420-hdmi";
+			reg = <0x14530000 0x70000>;
+			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+				 <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+				 <&clock CLK_MOUT_HDMI>;
+			clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+				"sclk_hdmiphy", "mout_hdmi";
+			phy = <&hdmiphy>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+			power-domains = <&disp_pd>;
+		};
+
+		hdmiphy: hdmiphy@145D0000 {
+			reg = <0x145D0000 0x20>;
+		};
+
+		mixer: mixer@14450000 {
+			compatible = "samsung,exynos5420-mixer";
+			reg = <0x14450000 0x10000>;
+			interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+				 <&clock CLK_SCLK_HDMI>;
+			clock-names = "mixer", "hdmi", "sclk_hdmi";
+			power-domains = <&disp_pd>;
+			iommus = <&sysmmu_tv>;
+		};
+
+		rotator: rotator@11C00000 {
+			compatible = "samsung,exynos5250-rotator";
+			reg = <0x11C00000 0x64>;
+			interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_ROTATOR>;
+			clock-names = "rotator";
+			iommus = <&sysmmu_rotator>;
+		};
+
+		gsc_0: video-scaler@13e00000 {
+			compatible = "samsung,exynos5-gsc";
+			reg = <0x13e00000 0x1000>;
+			interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_GSCL0>;
+			clock-names = "gscl";
+			power-domains = <&gsc_pd>;
+			iommus = <&sysmmu_gscl0>;
+		};
+
+		gsc_1: video-scaler@13e10000 {
+			compatible = "samsung,exynos5-gsc";
+			reg = <0x13e10000 0x1000>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_GSCL1>;
+			clock-names = "gscl";
+			power-domains = <&gsc_pd>;
+			iommus = <&sysmmu_gscl1>;
+		};
+
+		jpeg_0: jpeg@11F50000 {
+			compatible = "samsung,exynos5420-jpeg";
+			reg = <0x11F50000 0x1000>;
+			interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "jpeg";
+			clocks = <&clock CLK_JPEG>;
+			iommus = <&sysmmu_jpeg0>;
+		};
+
+		jpeg_1: jpeg@11F60000 {
+			compatible = "samsung,exynos5420-jpeg";
+			reg = <0x11F60000 0x1000>;
+			interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "jpeg";
+			clocks = <&clock CLK_JPEG2>;
+			iommus = <&sysmmu_jpeg1>;
+		};
+
+		pmu_system_controller: system-controller@10040000 {
+			compatible = "samsung,exynos5420-pmu", "syscon";
+			reg = <0x10040000 0x5000>;
+			clock-names = "clkout16";
+			clocks = <&clock CLK_FIN_PLL>;
+			#clock-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
 		};
-	};
-
-	bus_g2d_opp_table: opp_table9 {
-		compatible = "operating-points-v2";
 
-		opp00 {
-			opp-hz = /bits/ 64 <84000000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <167000000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <222000000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <300000000>;
-		};
-		opp04 {
-			opp-hz = /bits/ 64 <333000000>;
+		tmu_cpu0: tmu@10060000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x10060000 0x100>;
+			interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
+		};
+
+		tmu_cpu1: tmu@10064000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x10064000 0x100>;
+			interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
+		};
+
+		tmu_cpu2: tmu@10068000 {
+			compatible = "samsung,exynos5420-tmu-ext-triminfo";
+			reg = <0x10068000 0x100>, <0x1006c000 0x4>;
+			interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
+			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
+		};
+
+		tmu_cpu3: tmu@1006c000 {
+			compatible = "samsung,exynos5420-tmu-ext-triminfo";
+			reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
+			interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
+			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
+		};
+
+		tmu_gpu: tmu@100a0000 {
+			compatible = "samsung,exynos5420-tmu-ext-triminfo";
+			reg = <0x100a0000 0x100>, <0x10068000 0x4>;
+			interrupts = <0 215 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
+			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
+		};
+
+		sysmmu_g2dr: sysmmu@0x10A60000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x10A60000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <24 5>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_g2dw: sysmmu@0x10A70000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x10A70000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <22 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_tv: sysmmu@0x14650000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14650000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <7 4>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>;
+			power-domains = <&disp_pd>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_gscl0: sysmmu@0x13E80000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13E80000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
+			power-domains = <&gsc_pd>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_gscl1: sysmmu@0x13E90000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13E90000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
+			power-domains = <&gsc_pd>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_scaler0r: sysmmu@0x12880000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12880000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <22 4>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_scaler1r: sysmmu@0x12890000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12890000 0x1000>;
+			interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_scaler2r: sysmmu@0x128A0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x128A0000 0x1000>;
+			interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_scaler0w: sysmmu@0x128C0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x128C0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <27 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_scaler1w: sysmmu@0x128D0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x128D0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <22 6>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_scaler2w: sysmmu@0x128E0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x128E0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <19 6>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_rotator: sysmmu@0x11D40000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11D40000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_jpeg0: sysmmu@0x11F10000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11F10000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_jpeg1: sysmmu@0x11F20000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11F20000 0x1000>;
+			interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_mfc_l: sysmmu@0x11200000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11200000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <6 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+			power-domains = <&mfc_pd>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_mfc_r: sysmmu@0x11210000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11210000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <8 5>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+			power-domains = <&mfc_pd>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimd1_0: sysmmu@0x14640000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14640000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
+			power-domains = <&disp_pd>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimd1_1: sysmmu@0x14680000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14680000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>;
+			power-domains = <&disp_pd>;
+			#iommu-cells = <0>;
+		};
+
+		bus_wcore: bus_wcore {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_wcore_opp_table>;
+			status = "disabled";
 		};
-	};
-
-	bus_g2d_acp_opp_table: opp_table10 {
-		compatible = "operating-points-v2";
 
-		opp00 {
-			opp-hz = /bits/ 64 <67000000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <133000000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <178000000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <267000000>;
+		bus_noc: bus_noc {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK100_NOC>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_noc_opp_table>;
+			status = "disabled";
 		};
-	};
-
-	bus_jpeg_opp_table: opp_table11 {
-		compatible = "operating-points-v2";
 
-		opp00 {
-			opp-hz = /bits/ 64 <75000000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <150000000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <200000000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <300000000>;
+		bus_fsys_apb: bus_fsys_apb {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_fsys_apb_opp_table>;
+			status = "disabled";
 		};
-	};
-
-	bus_jpeg_apb_opp_table: opp_table12 {
-		compatible = "operating-points-v2";
 
-		opp00 {
-			opp-hz = /bits/ 64 <84000000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <111000000>;
+		bus_fsys: bus_fsys {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_fsys_apb_opp_table>;
+			status = "disabled";
 		};
-		opp02 {
-			opp-hz = /bits/ 64 <134000000>;
+
+		bus_fsys2: bus_fsys2 {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_fsys2_opp_table>;
+			status = "disabled";
 		};
-		opp03 {
-			opp-hz = /bits/ 64 <167000000>;
+
+		bus_mfc: bus_mfc {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK333>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_mfc_opp_table>;
+			status = "disabled";
 		};
-	};
 
-	bus_disp1_fimd_opp_table: opp_table13 {
-		compatible = "operating-points-v2";
+		bus_gen: bus_gen {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK266>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_gen_opp_table>;
+			status = "disabled";
+		};
 
-		opp00 {
-			opp-hz = /bits/ 64 <120000000>;
+		bus_peri: bus_peri {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK66>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_peri_opp_table>;
+			status = "disabled";
 		};
-		opp01 {
-			opp-hz = /bits/ 64 <200000000>;
+
+		bus_g2d: bus_g2d {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK333_G2D>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_g2d_opp_table>;
+			status = "disabled";
 		};
-	};
 
-	bus_disp1_opp_table: opp_table14 {
-		compatible = "operating-points-v2";
+		bus_g2d_acp: bus_g2d_acp {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK266_G2D>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_g2d_acp_opp_table>;
+			status = "disabled";
+		};
 
-		opp00 {
-			opp-hz = /bits/ 64 <120000000>;
+		bus_jpeg: bus_jpeg {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_jpeg_opp_table>;
+			status = "disabled";
 		};
-		opp01 {
-			opp-hz = /bits/ 64 <200000000>;
+
+		bus_jpeg_apb: bus_jpeg_apb {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK166>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_jpeg_apb_opp_table>;
+			status = "disabled";
 		};
-		opp02 {
-			opp-hz = /bits/ 64 <300000000>;
+
+		bus_disp1_fimd: bus_disp1_fimd {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_disp1_fimd_opp_table>;
+			status = "disabled";
 		};
-	};
 
-	bus_gscl_opp_table: opp_table15 {
-		compatible = "operating-points-v2";
+		bus_disp1: bus_disp1 {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_disp1_opp_table>;
+			status = "disabled";
+		};
 
-		opp00 {
-			opp-hz = /bits/ 64 <150000000>;
+		bus_gscl_scaler: bus_gscl_scaler {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_gscl_opp_table>;
+			status = "disabled";
 		};
-		opp01 {
-			opp-hz = /bits/ 64 <200000000>;
+
+		bus_mscl: bus_mscl {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_mscl_opp_table>;
+			status = "disabled";
 		};
-		opp02 {
-			opp-hz = /bits/ 64 <300000000>;
+
+		bus_wcore_opp_table: opp_table2 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <84000000>;
+				opp-microvolt = <925000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <111000000>;
+				opp-microvolt = <950000>;
+			};
+			opp02 {
+				opp-hz = /bits/ 64 <222000000>;
+				opp-microvolt = <950000>;
+			};
+			opp03 {
+				opp-hz = /bits/ 64 <333000000>;
+				opp-microvolt = <950000>;
+			};
+			opp04 {
+				opp-hz = /bits/ 64 <400000000>;
+				opp-microvolt = <987500>;
+			};
+		};
+
+		bus_noc_opp_table: opp_table3 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <67000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <75000000>;
+			};
+			opp02 {
+				opp-hz = /bits/ 64 <86000000>;
+			};
+			opp03 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+		};
+
+		bus_fsys_apb_opp_table: opp_table4 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp00 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+		};
+
+		bus_fsys2_opp_table: opp_table5 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <75000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp02 {
+				opp-hz = /bits/ 64 <150000000>;
+			};
+		};
+
+		bus_mfc_opp_table: opp_table6 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <96000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <111000000>;
+			};
+			opp02 {
+				opp-hz = /bits/ 64 <167000000>;
+			};
+			opp03 {
+				opp-hz = /bits/ 64 <222000000>;
+			};
+			opp04 {
+				opp-hz = /bits/ 64 <333000000>;
+			};
+		};
+
+		bus_gen_opp_table: opp_table7 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <89000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <133000000>;
+			};
+			opp02 {
+				opp-hz = /bits/ 64 <178000000>;
+			};
+			opp03 {
+				opp-hz = /bits/ 64 <267000000>;
+			};
+		};
+
+		bus_peri_opp_table: opp_table8 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <67000000>;
+			};
+		};
+
+		bus_g2d_opp_table: opp_table9 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <84000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <167000000>;
+			};
+			opp02 {
+				opp-hz = /bits/ 64 <222000000>;
+			};
+			opp03 {
+				opp-hz = /bits/ 64 <300000000>;
+			};
+			opp04 {
+				opp-hz = /bits/ 64 <333000000>;
+			};
+		};
+
+		bus_g2d_acp_opp_table: opp_table10 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <67000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <133000000>;
+			};
+			opp02 {
+				opp-hz = /bits/ 64 <178000000>;
+			};
+			opp03 {
+				opp-hz = /bits/ 64 <267000000>;
+			};
+		};
+
+		bus_jpeg_opp_table: opp_table11 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <75000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <150000000>;
+			};
+			opp02 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+			opp03 {
+				opp-hz = /bits/ 64 <300000000>;
+			};
+		};
+
+		bus_jpeg_apb_opp_table: opp_table12 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <84000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <111000000>;
+			};
+			opp02 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+			opp03 {
+				opp-hz = /bits/ 64 <167000000>;
+			};
+		};
+
+		bus_disp1_fimd_opp_table: opp_table13 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <120000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+		};
+
+		bus_disp1_opp_table: opp_table14 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <120000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+			opp02 {
+				opp-hz = /bits/ 64 <300000000>;
+			};
+		};
+
+		bus_gscl_opp_table: opp_table15 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <150000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+			opp02 {
+				opp-hz = /bits/ 64 <300000000>;
+			};
+		};
+
+		bus_mscl_opp_table: opp_table16 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <84000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <167000000>;
+			};
+			opp02 {
+				opp-hz = /bits/ 64 <222000000>;
+			};
+			opp03 {
+				opp-hz = /bits/ 64 <333000000>;
+			};
+			opp04 {
+				opp-hz = /bits/ 64 <400000000>;
+			};
 		};
 	};
 
-	bus_mscl_opp_table: opp_table16 {
-		compatible = "operating-points-v2";
-
-		opp00 {
-			opp-hz = /bits/ 64 <84000000>;
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			thermal-sensors = <&tmu_cpu0>;
+			#include "exynos5420-trip-points.dtsi"
 		};
-		opp01 {
-			opp-hz = /bits/ 64 <167000000>;
+		cpu1_thermal: cpu1-thermal {
+		       thermal-sensors = <&tmu_cpu1>;
+		       #include "exynos5420-trip-points.dtsi"
 		};
-		opp02 {
-			opp-hz = /bits/ 64 <222000000>;
+		cpu2_thermal: cpu2-thermal {
+		       thermal-sensors = <&tmu_cpu2>;
+		       #include "exynos5420-trip-points.dtsi"
 		};
-		opp03 {
-			opp-hz = /bits/ 64 <333000000>;
+		cpu3_thermal: cpu3-thermal {
+		       thermal-sensors = <&tmu_cpu3>;
+		       #include "exynos5420-trip-points.dtsi"
 		};
-		opp04 {
-			opp-hz = /bits/ 64 <400000000>;
+		gpu_thermal: gpu-thermal {
+		       thermal-sensors = <&tmu_gpu>;
+		       #include "exynos5420-trip-points.dtsi"
 		};
 	};
 };
@@ -1614,6 +1330,72 @@
 	iommu-names = "m0", "m1";
 };
 
+&i2c_0 {
+	clocks = <&clock CLK_I2C0>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_bus>;
+};
+
+&i2c_1 {
+	clocks = <&clock CLK_I2C1>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_bus>;
+};
+
+&i2c_2 {
+	clocks = <&clock CLK_I2C2>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_bus>;
+};
+
+&i2c_3 {
+	clocks = <&clock CLK_I2C3>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_bus>;
+};
+
+&hsi2c_4 {
+	clocks = <&clock CLK_USI0>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_hs_bus>;
+};
+
+&hsi2c_5 {
+	clocks = <&clock CLK_USI1>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_hs_bus>;
+};
+
+&hsi2c_6 {
+	clocks = <&clock CLK_USI2>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_hs_bus>;
+};
+
+&hsi2c_7 {
+	clocks = <&clock CLK_USI3>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_hs_bus>;
+};
+
+&mct {
+	clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+	clock-names = "fin_pll", "mct";
+};
+
+&pwm {
+	clocks = <&clock CLK_PWM>;
+	clock-names = "timers";
+};
+
 &rtc {
 	clocks = <&clock CLK_RTC>;
 	clock-names = "rtc";
@@ -1641,4 +1423,58 @@
 	clock-names = "uart", "clk_uart_baud0";
 };
 
+&sss {
+	clocks = <&clock CLK_SSS>;
+	clock-names = "secss";
+};
+
+&usbdrd3_0 {
+	clocks = <&clock CLK_USBD300>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_phy0 {
+	clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbdrd3_1 {
+	clocks = <&clock CLK_USBD301>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_dwc3_1 {
+	interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usbdrd_phy1 {
+	clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbhost1 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usbhost2 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usb2_phy {
+	clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,sysreg-phandle = <&sysreg_system_controller>;
+	samsung,pmureg-phandle = <&pmu_system_controller>;
+};
+
+&watchdog {
+	clocks = <&clock CLK_WDT>;
+	clock-names = "watchdog";
+	samsung,syscon-phandle = <&pmu_system_controller>;
+};
+
 #include "exynos5420-pinctrl.dtsi"
diff --git a/src/arm/exynos5422-odroidxu3-common.dtsi b/src/arm/exynos5422-odroidxu3-common.dtsi
index 2a4e10bc8801..05b9afdd6757 100644
--- a/src/arm/exynos5422-odroidxu3-common.dtsi
+++ b/src/arm/exynos5422-odroidxu3-common.dtsi
@@ -1,9 +1,11 @@
 /*
  * Hardkernel Odroid XU3 board device tree source
  *
- * Copyright (c) 2014 Collabora Ltd.
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2015 Lukasz Majewski <l.majewski@samsung.com>
+ *                    Anand Moon <linux.amoon@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -16,15 +18,16 @@
 #include <dt-bindings/sound/samsung-i2s.h>
 #include "exynos5800.dtsi"
 #include "exynos5422-cpus.dtsi"
-#include "exynos5422-cpu-thermal.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x7EA00000>;
 	};
 
 	chosen {
-		linux,stdout-path = &serial_2;
+		stdout-path = "serial2:115200n8";
 	};
 
 	firmware@02073000 {
@@ -54,6 +57,99 @@
 		#cooling-cells = <2>;
 		cooling-levels = <0 130 170 230>;
 	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			thermal-sensors = <&tmu_cpu0 0>;
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			trips {
+				cpu_alert0: cpu-alert-0 {
+					temperature = <50000>; /* millicelsius */
+					hysteresis = <5000>; /* millicelsius */
+					type = "active";
+				};
+				cpu_alert1: cpu-alert-1 {
+					temperature = <60000>; /* millicelsius */
+					hysteresis = <5000>; /* millicelsius */
+					type = "active";
+				};
+				cpu_alert2: cpu-alert-2 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <5000>; /* millicelsius */
+					type = "active";
+				};
+				cpu_crit0: cpu-crit-0 {
+					temperature = <120000>; /* millicelsius */
+					hysteresis = <0>; /* millicelsius */
+					type = "critical";
+				};
+				/*
+				 * Exynos542x supports only 4 trip-points
+				 * so for these polling mode is required.
+				 * Start polling at temperature level of last
+				 * interrupt-driven trip: cpu_alert2
+				 */
+				cpu_alert3: cpu-alert-3 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <10000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu_alert4: cpu-alert-4 {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <10000>; /* millicelsius */
+					type = "passive";
+				};
+
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&fan0 0 1>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device = <&fan0 1 2>;
+				};
+				map2 {
+					trip = <&cpu_alert2>;
+					cooling-device = <&fan0 2 3>;
+				};
+				/*
+				 * When reaching cpu_alert3, reduce CPU
+				 * by 2 steps. On Exynos5422/5800 that would
+				 * be: 1600 MHz and 1100 MHz.
+				 */
+				map3 {
+					trip = <&cpu_alert3>;
+					cooling-device = <&cpu0 0 2>;
+				};
+				map4 {
+					trip = <&cpu_alert3>;
+					cooling-device = <&cpu4 0 2>;
+				};
+
+				/*
+				 * When reaching cpu_alert4, reduce CPU
+				 * further, down to 600 MHz (11 steps for big,
+				 * 7 steps for LITTLE).
+				 */
+				map5 {
+					trip = <&cpu_alert4>;
+					cooling-device = <&cpu0 3 7>;
+				};
+				map6 {
+					trip = <&cpu_alert4>;
+					cooling-device = <&cpu4 3 11>;
+				};
+			};
+		};
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo4_reg>;
+	status = "okay";
 };
 
 &bus_wcore {
@@ -160,7 +256,7 @@
 
 &hdmi {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 
@@ -202,6 +298,12 @@
 				regulator-max-microvolt = <1800000>;
 			};
 
+			ldo4_reg: LDO4 {
+				regulator-name = "vdd_adc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
 			ldo5_reg: LDO5 {
 				regulator-name = "vdd_ldo5";
 				regulator-min-microvolt = <1800000>;
@@ -405,15 +507,9 @@
 	};
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-};
-
 &mmc_0 {
 	status = "okay";
 	mmc-pwrseq = <&emmc_pwrseq>;
-	cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
@@ -463,51 +559,46 @@
 &pinctrl_0 {
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	s2mps11_irq: s2mps11-irq {
 		samsung,pins = "gpx0-4";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_1 {
 	emmc_nrst_pin: emmc-nrst {
 		samsung,pins = "gpd1-0";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
 &tmu_cpu0 {
 	vtmu-supply = <&ldo7_reg>;
-	status = "okay";
 };
 
 &tmu_cpu1 {
 	vtmu-supply = <&ldo7_reg>;
-	status = "okay";
 };
 
 &tmu_cpu2 {
 	vtmu-supply = <&ldo7_reg>;
-	status = "okay";
 };
 
 &tmu_cpu3 {
 	vtmu-supply = <&ldo7_reg>;
-	status = "okay";
 };
 
 &tmu_gpu {
 	vtmu-supply = <&ldo7_reg>;
-	status = "okay";
 };
 
 &rtc {
diff --git a/src/arm/exynos5422-odroidxu3-lite.dts b/src/arm/exynos5422-odroidxu3-lite.dts
index 2ae1cf41dcb6..03fa88c45426 100644
--- a/src/arm/exynos5422-odroidxu3-lite.dts
+++ b/src/arm/exynos5422-odroidxu3-lite.dts
@@ -14,44 +14,11 @@
 /dts-v1/;
 #include "exynos5422-odroidxu3-common.dtsi"
 #include "exynos5422-odroidxu3-audio.dtsi"
+#include "exynos54xx-odroidxu-leds.dtsi"
 
 / {
 	model = "Hardkernel Odroid XU3 Lite";
 	compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		greenled {
-			label = "green:mmc0";
-			pwms = <&pwm 1 2000000 0>;
-			pwm-names = "pwm1";
-			/*
-			 * Green LED is much brighter than the others
-			 * so limit its max brightness
-			 */
-			max_brightness = <127>;
-			linux,default-trigger = "mmc0";
-		};
-
-		blueled {
-			label = "blue:heartbeat";
-			pwms = <&pwm 2 2000000 0>;
-			pwm-names = "pwm2";
-			max_brightness = <255>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpioleds {
-		compatible = "gpio-leds";
-		redled {
-			label = "red:microSD";
-			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc1";
-		};
-	};
 };
 
 &pwm {
diff --git a/src/arm/exynos5422-odroidxu3.dts b/src/arm/exynos5422-odroidxu3.dts
index 432406db85de..9ed6564acfb0 100644
--- a/src/arm/exynos5422-odroidxu3.dts
+++ b/src/arm/exynos5422-odroidxu3.dts
@@ -13,44 +13,11 @@
 /dts-v1/;
 #include "exynos5422-odroidxu3-common.dtsi"
 #include "exynos5422-odroidxu3-audio.dtsi"
+#include "exynos54xx-odroidxu-leds.dtsi"
 
 / {
 	model = "Hardkernel Odroid XU3";
 	compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		greenled {
-			label = "green:mmc0";
-			pwms = <&pwm 1 2000000 0>;
-			pwm-names = "pwm1";
-			/*
-			 * Green LED is much brighter than the others
-			 * so limit its max brightness
-			 */
-			max_brightness = <127>;
-			linux,default-trigger = "mmc0";
-		};
-
-		blueled {
-			label = "blue:heartbeat";
-			pwms = <&pwm 2 2000000 0>;
-			pwm-names = "pwm2";
-			max_brightness = <255>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpioleds {
-		compatible = "gpio-leds";
-		redled {
-			label = "red:microSD";
-			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc1";
-		};
-	};
 };
 
 &i2c_0 {
diff --git a/src/arm/exynos5440-sd5v1.dts b/src/arm/exynos5440-sd5v1.dts
index a98501bab6fc..ad6f533b3f40 100644
--- a/src/arm/exynos5440-sd5v1.dts
+++ b/src/arm/exynos5440-sd5v1.dts
@@ -20,6 +20,12 @@
 		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
 	};
 
+	/* FIXME: set reg property with correct start address and size */
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
 	fixed-rate-clocks {
 		xtal {
 			compatible = "samsung,clock-xtal";
diff --git a/src/arm/exynos5440-ssdk5440.dts b/src/arm/exynos5440-ssdk5440.dts
index 6a0d802e87c8..92bd2c6f7631 100644
--- a/src/arm/exynos5440-ssdk5440.dts
+++ b/src/arm/exynos5440-ssdk5440.dts
@@ -21,6 +21,12 @@
 		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
 	};
 
+	/* FIXME: set reg property with correct start address and size */
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
 	fixed-rate-clocks {
 		xtal {
 			compatible = "samsung,clock-xtal";
diff --git a/src/arm/exynos5440.dtsi b/src/arm/exynos5440.dtsi
index fd176819b4bf..2a2e570bbee6 100644
--- a/src/arm/exynos5440.dtsi
+++ b/src/arm/exynos5440.dtsi
@@ -10,12 +10,15 @@
 */
 
 #include <dt-bindings/clock/exynos5440.h>
-#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	compatible = "samsung,exynos5440", "samsung,exynos5";
 
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		serial0 = &serial_0;
@@ -40,7 +43,8 @@
 			<0x2E2000 0x1000>,
 			<0x2E4000 0x2000>,
 			<0x2E6000 0x2000>;
-		interrupts = <1 9 0xf04>;
+		interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
 	cpus {
@@ -71,26 +75,26 @@
 
 	arm-pmu {
 		compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
-		interrupts = <0 52 4>,
-			     <0 53 4>,
-			     <0 54 4>,
-			     <0 55 4>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	timer {
 		compatible = "arm,cortex-a15-timer",
 			     "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		clock-frequency = <50000000>;
 	};
 
 	cpufreq@160000 {
 		compatible = "samsung,exynos5440-cpufreq";
 		reg = <0x160000 0x1000>;
-		interrupts = <0 57 0>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 		operating-points = <
 				/* KHz	  uV */
 				1500000 1100000
@@ -107,7 +111,7 @@
 	serial_0: serial@B0000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0xB0000 0x1000>;
-		interrupts = <0 2 0>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
@@ -115,7 +119,7 @@
 	serial_1: serial@C0000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0xC0000 0x1000>;
-		interrupts = <0 3 0>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
@@ -123,7 +127,7 @@
 	spi_0: spi@D0000 {
 		compatible = "samsung,exynos5440-spi";
 		reg = <0xD0000 0x100>;
-		interrupts = <0 4 0>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		samsung,spi-src-clk = <0>;
@@ -135,8 +139,14 @@
 	pin_ctrl: pinctrl@E0000 {
 		compatible = "samsung,exynos5440-pinctrl";
 		reg = <0xE0000 0x1000>;
-		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>,
-			     <0 41 0>, <0 42 0>, <0 43 0>, <0 44 0>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		#gpio-cells = <2>;
@@ -161,7 +171,7 @@
 	i2c@F0000 {
 		compatible = "samsung,exynos5440-i2c";
 		reg = <0xF0000 0x1000>;
-		interrupts = <0 5 0>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&clock CLK_B_125>;
@@ -171,7 +181,7 @@
 	i2c@100000 {
 		compatible = "samsung,exynos5440-i2c";
 		reg = <0x100000 0x1000>;
-		interrupts = <0 6 0>;
+		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&clock CLK_B_125>;
@@ -181,16 +191,16 @@
 	watchdog@110000 {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x110000 0x1000>;
-		interrupts = <0 1 0>;
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_B_125>;
 		clock-names = "watchdog";
 	};
 
 	gmac: ethernet@00230000 {
-		compatible = "snps,dwmac-3.70a";
+		compatible = "snps,dwmac-3.70a", "snps,dwmac";
 		reg = <0x00230000 0x8000>;
 		interrupt-parent = <&gic>;
-		interrupts = <0 31 4>;
+		interrupts = <GIC_SPI 31 4>;
 		interrupt-names = "macirq";
 		phy-mode = "sgmii";
 		clocks = <&clock CLK_GMAC0>;
@@ -208,7 +218,8 @@
 	rtc@130000 {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x130000 0x1000>;
-		interrupts = <0 17 0>, <0 16 0>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_B_125>;
 		clock-names = "rtc";
 	};
@@ -216,7 +227,7 @@
 	tmuctrl_0: tmuctrl@160118 {
 		compatible = "samsung,exynos5440-tmu";
 		reg = <0x160118 0x230>, <0x160368 0x10>;
-		interrupts = <0 58 0>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_B_125>;
 		clock-names = "tmu_apbif";
 		#include "exynos5440-tmu-sensor-conf.dtsi"
@@ -225,7 +236,7 @@
 	tmuctrl_1: tmuctrl@16011C {
 		compatible = "samsung,exynos5440-tmu";
 		reg = <0x16011C 0x230>, <0x160368 0x10>;
-		interrupts = <0 58 0>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_B_125>;
 		clock-names = "tmu_apbif";
 		#include "exynos5440-tmu-sensor-conf.dtsi"
@@ -234,7 +245,7 @@
 	tmuctrl_2: tmuctrl@160120 {
 		compatible = "samsung,exynos5440-tmu";
 		reg = <0x160120 0x230>, <0x160368 0x10>;
-		interrupts = <0 58 0>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_B_125>;
 		clock-names = "tmu_apbif";
 		#include "exynos5440-tmu-sensor-conf.dtsi"
@@ -258,7 +269,7 @@
 	sata@210000 {
 		compatible = "snps,exynos5440-ahci";
 		reg = <0x210000 0x10000>;
-		interrupts = <0 30 0>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_SATA>;
 		clock-names = "sata";
 	};
@@ -266,7 +277,7 @@
 	ohci@220000 {
 		compatible = "samsung,exynos5440-ohci";
 		reg = <0x220000 0x1000>;
-		interrupts = <0 29 0>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_USB>;
 		clock-names = "usbhost";
 	};
@@ -274,7 +285,7 @@
 	ehci@221000 {
 		compatible = "samsung,exynos5440-ehci";
 		reg = <0x221000 0x1000>;
-		interrupts = <0 29 0>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_USB>;
 		clock-names = "usbhost";
 	};
@@ -284,7 +295,9 @@
 		reg = <0x290000 0x1000
 			0x270000 0x1000
 			0x271000 0x40>;
-		interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>;
 		clock-names = "pcie", "pcie_bus";
 		#address-cells = <3>;
@@ -305,7 +318,9 @@
 		reg = <0x2a0000 0x1000
 			0x272000 0x1000
 			0x271040 0x40>;
-		interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>;
 		clock-names = "pcie", "pcie_bus";
 		#address-cells = <3>;
diff --git a/src/arm/exynos54xx-odroidxu-leds.dtsi b/src/arm/exynos54xx-odroidxu-leds.dtsi
new file mode 100644
index 000000000000..0ed30206625c
--- /dev/null
+++ b/src/arm/exynos54xx-odroidxu-leds.dtsi
@@ -0,0 +1,50 @@
+/*
+ * Hardkernel Odroid XU/XU3 LED device tree source
+ *
+ * Copyright (c) 2015,2016 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	pwmleds {
+		compatible = "pwm-leds";
+
+		greenled {
+			label = "green:mmc0";
+			pwms = <&pwm 1 2000000 0>;
+			pwm-names = "pwm1";
+			/*
+			 * Green LED is much brighter than the others
+			 * so limit its max brightness
+			 */
+			max_brightness = <127>;
+			linux,default-trigger = "mmc0";
+		};
+
+		blueled {
+			label = "blue:heartbeat";
+			pwms = <&pwm 2 2000000 0>;
+			pwm-names = "pwm2";
+			max_brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpioleds {
+		compatible = "gpio-leds";
+		redled {
+			label = "red:microSD";
+			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc1";
+		};
+	};
+};
diff --git a/src/arm/exynos54xx.dtsi b/src/arm/exynos54xx.dtsi
new file mode 100644
index 000000000000..0389e8a10d0b
--- /dev/null
+++ b/src/arm/exynos54xx.dtsi
@@ -0,0 +1,198 @@
+/*
+ * Samsung's Exynos54xx SoC series common device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2016 Krzysztof Kozlowski
+ *
+ * Device nodes common for Samsung Exynos5410/5420/5422/5800. Specific
+ * Exynos 54xx SoCs should include this file and customize it further
+ * (e.g. with clocks).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "exynos5.dtsi"
+
+/ {
+	compatible = "samsung,exynos5";
+
+	aliases {
+		i2c4 = &hsi2c_4;
+		i2c5 = &hsi2c_5;
+		i2c6 = &hsi2c_6;
+		i2c7 = &hsi2c_7;
+		usbdrdphy0 = &usbdrd_phy0;
+		usbdrdphy1 = &usbdrd_phy1;
+	};
+
+	soc: soc {
+		sysram@02020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x54000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x54000>;
+
+			smp-sysram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
+
+			smp-sysram@53000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x53000 0x1000>;
+			};
+		};
+
+		mct: mct@101c0000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x101c0000 0xb00>;
+			interrupt-parent = <&mct_map>;
+			interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
+					<8>, <9>, <10>, <11>;
+
+			mct_map: mct-map {
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = <0 &combiner 23 3>,
+						<1 &combiner 23 4>,
+						<2 &combiner 25 2>,
+						<3 &combiner 25 3>,
+						<4 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>,
+						<5 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>,
+						<6 &gic 0 122 IRQ_TYPE_LEVEL_HIGH>,
+						<7 &gic 0 123 IRQ_TYPE_LEVEL_HIGH>,
+						<8 &gic 0 128 IRQ_TYPE_LEVEL_HIGH>,
+						<9 &gic 0 129 IRQ_TYPE_LEVEL_HIGH>,
+						<10 &gic 0 130 IRQ_TYPE_LEVEL_HIGH>,
+						<11 &gic 0 131 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		watchdog: watchdog@101d0000 {
+			compatible = "samsung,exynos5420-wdt";
+			reg = <0x101d0000 0x100>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		sss: sss@10830000 {
+			compatible = "samsung,exynos4210-secss";
+			reg = <0x10830000 0x300>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		/* i2c_0-3 are defined in exynos5.dtsi */
+		hsi2c_4: i2c@12ca0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12ca0000 0x1000>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_5: i2c@12cb0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12cb0000 0x1000>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_6: i2c@12cc0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12cc0000 0x1000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_7: i2c@12cd0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12cd0000 0x1000>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usbdrd3_0: usb3-0 {
+			compatible = "samsung,exynos5250-dwusb3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbdrd_dwc3_0: dwc3@12000000 {
+				compatible = "snps,dwc3";
+				reg = <0x12000000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usbdrd_phy0: phy@12100000 {
+			compatible = "samsung,exynos5420-usbdrd-phy";
+			reg = <0x12100000 0x100>;
+			#phy-cells = <1>;
+		};
+
+		usbdrd3_1: usb3-1 {
+			compatible = "samsung,exynos5250-dwusb3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbdrd_dwc3_1: dwc3@12400000 {
+				compatible = "snps,dwc3";
+				reg = <0x12400000 0x10000>;
+				phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usbdrd_phy1: phy@12500000 {
+			compatible = "samsung,exynos5420-usbdrd-phy";
+			reg = <0x12500000 0x100>;
+			#phy-cells = <1>;
+		};
+
+		usbhost2: usb@12110000 {
+			compatible = "samsung,exynos4210-ehci";
+			reg = <0x12110000 0x100>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				phys = <&usb2_phy 1>;
+			};
+		};
+
+		usbhost1: usb@12120000 {
+			compatible = "samsung,exynos4210-ohci";
+			reg = <0x12120000 0x100>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				phys = <&usb2_phy 1>;
+			};
+		};
+
+		usb2_phy: phy@12130000 {
+			compatible = "samsung,exynos5250-usb2-phy";
+			reg = <0x12130000 0x100>;
+			#phy-cells = <1>;
+		};
+	};
+};
diff --git a/src/arm/exynos5800-peach-pi.dts b/src/arm/exynos5800-peach-pi.dts
index 62ceb89e073f..f9ff7f07ae0c 100644
--- a/src/arm/exynos5800-peach-pi.dts
+++ b/src/arm/exynos5800-peach-pi.dts
@@ -16,6 +16,7 @@
 #include <dt-bindings/regulator/maxim,max77802.h>
 #include "exynos5800.dtsi"
 #include "exynos5420-cpus.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "Google Peach Pi Rev 10+";
@@ -78,7 +79,8 @@
 
 	};
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x80000000>;
 	};
 
@@ -178,7 +180,7 @@
 
 &hdmi {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 	ddc = <&i2c_2>;
@@ -278,7 +280,6 @@
 				regulator-name = "vdd_1v2";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-off-in-suspend;
@@ -301,7 +302,6 @@
 				regulator-name = "vdd_1v35";
 				regulator-min-microvolt = <1350000>;
 				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -323,7 +323,6 @@
 				regulator-name = "vdd_2v";
 				regulator-min-microvolt = <2000000>;
 				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -334,7 +333,6 @@
 				regulator-name = "vdd_1v8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -419,7 +417,6 @@
 				regulator-name = "vdd_ldo9";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-mode = <MAX77802_OPMODE_LP>;
@@ -430,7 +427,6 @@
 				regulator-name = "vdd_ldo10";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
@@ -669,11 +665,7 @@
 	status = "okay";
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-};
-
+/* eMMC flash */
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
@@ -692,6 +684,7 @@
 	bus-width = <8>;
 };
 
+/* WiFi SDIO module */
 &mmc_1 {
 	status = "okay";
 	num-slots = <1>;
@@ -711,6 +704,7 @@
 	vqmmc-supply = <&buck10_reg>;
 };
 
+/* uSD card */
 &mmc_2 {
 	status = "okay";
 	num-slots = <1>;
@@ -732,171 +726,171 @@
 
 	wifi_en: wifi-en {
 		samsung,pins = "gpx0-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	max98091_irq: max98091-irq {
 		samsung,pins = "gpx0-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	/* We need GPX0_6 to be low at sleep time; just keep it low always */
 	mask_tpm_reset: mask-tpm-reset {
 		samsung,pins = "gpx0-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 		samsung,pin-val = <0>;
 	};
 
 	tpm_irq: tpm-irq {
 		samsung,pins = "gpx1-0";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	trackpad_irq: trackpad-irq {
 		samsung,pins = "gpx1-1";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	power_key_irq: power-key-irq {
 		samsung,pins = "gpx1-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	ec_irq: ec-irq {
 		samsung,pins = "gpx1-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	tps65090_irq: tps65090-irq {
 		samsung,pins = "gpx2-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	dp_hpd_gpio: dp_hpd_gpio {
 		samsung,pins = "gpx2-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	max77802_irq: max77802-irq {
 		samsung,pins = "gpx3-1";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	lid_irq: lid-irq {
 		samsung,pins = "gpx3-4";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pmic_dvs_1: pmic-dvs-1 {
 		samsung,pins = "gpy7-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_1 {
 	/* Adjust WiFi drive strengths lower for EMI */
 	sd1_clk: sd1-clk {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	sd1_cmd: sd1-cmd {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	sd1_bus8: sd1-bus-width8 {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 };
 
 &pinctrl_2 {
 	pmic_dvs_2: pmic-dvs-2 {
 		samsung,pins = "gpj4-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pmic_dvs_3: pmic-dvs-3 {
 		samsung,pins = "gpj4-3";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_3 {
 	/* Drive SPI lines at x2 for better integrity */
 	spi2-bus {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	/* Drive SPI chip select at x2 for better integrity */
 	ec_spi_cs: ec-spi-cs {
 		samsung,pins = "gpb1-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	usb300_vbus_en: usb300-vbus-en {
 		samsung,pins = "gph0-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	usb301_vbus_en: usb301-vbus-en {
 		samsung,pins = "gph0-1";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pmic_selb: pmic-selb {
 		samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
 			       "gph0-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
@@ -1022,6 +1016,26 @@
 	status = "okay";
 };
 
+&tmu_cpu0 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+	vtmu-supply = <&ldo10_reg>;
+};
+
 &usbdrd_dwc3_0 {
 	dr_mode = "host";
 };
diff --git a/src/arm/ge863-pro3.dtsi b/src/arm/ge863-pro3.dtsi
index 0d0e62489d93..4aee5cc75fa4 100644
--- a/src/arm/ge863-pro3.dtsi
+++ b/src/arm/ge863-pro3.dtsi
@@ -11,15 +11,6 @@
 
 / {
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <6000000>;
-		};
-
 		main_xtal {
 			clock-frequency = <6000000>;
 		};
diff --git a/src/arm/hi3519-demb.dts b/src/arm/hi3519-demb.dts
new file mode 100644
index 000000000000..6991ab694c9c
--- /dev/null
+++ b/src/arm/hi3519-demb.dts
@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/dts-v1/;
+#include "hi3519.dtsi"
+
+/ {
+	model = "HiSilicon HI3519 DEMO Board";
+	compatible = "hisilicon,hi3519";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&dual_timer0 {
+	status = "okay";
+};
diff --git a/src/arm/hi3519.dtsi b/src/arm/hi3519.dtsi
new file mode 100644
index 000000000000..5729ecfcdc8b
--- /dev/null
+++ b/src/arm/hi3519.dtsi
@@ -0,0 +1,187 @@
+/*
+ * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <dt-bindings/clock/hi3519-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+		};
+	};
+
+	gic: interrupt-controller@10300000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x10301000 0x1000>, <0x10302000 0x1000>;
+	};
+
+	clk_3m: clk_3m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <3000000>;
+	};
+
+	crg: clock-reset-controller@12010000 {
+		compatible = "hisilicon,hi3519-crg";
+		#clock-cells = <1>;
+		#reset-cells = <2>;
+		reg = <0x12010000 0x10000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		uart0: serial@12100000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12100000 0x1000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART0_CLK>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		uart1: serial@12101000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12101000 0x1000>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART1_CLK>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		uart2: serial@12102000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12102000 0x1000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART2_CLK>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		uart3: serial@12103000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12103000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART3_CLK>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		uart4: serial@12104000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12104000 0x1000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART4_CLK>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		dual_timer0: timer@12000000 {
+			compatible = "arm,sp804", "arm,primecell";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x12000000 0x1000>;
+			clocks = <&clk_3m>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		dual_timer1: timer@12001000 {
+			compatible = "arm,sp804", "arm,primecell";
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x12001000 0x1000>;
+			clocks = <&clk_3m>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		dual_timer2: timer@12002000 {
+			compatible = "arm,sp804", "arm,primecell";
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x12002000 0x1000>;
+			clocks = <&clk_3m>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		spi_bus0: spi@12120000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x12120000 0x1000>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_SPI0_CLK>;
+			clock-names = "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disable";
+		};
+
+		spi_bus1: spi@12121000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x12121000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_SPI1_CLK>;
+			clock-names = "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disable";
+		};
+
+		spi_bus2: spi@12122000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x12122000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_SPI2_CLK>;
+			clock-names = "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disable";
+		};
+
+		sysctrl: system-controller@12020000 {
+			compatible = "hisilicon,hi3519-sysctrl", "syscon";
+			reg = <0x12020000 0x1000>;
+		};
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&sysctrl>;
+			offset = <0x4>;
+			mask = <0xdeadbeef>;
+		};
+	};
+};
diff --git a/src/arm/hi3620.dtsi b/src/arm/hi3620.dtsi
index c85d07e6db61..541d70094544 100644
--- a/src/arm/hi3620.dtsi
+++ b/src/arm/hi3620.dtsi
@@ -11,10 +11,12 @@
  * publishhed by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/hi3620-clock.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		serial0 = &uart0;
 		serial1 = &uart1;
@@ -537,6 +539,7 @@
 			reg = <0x803000 0x188>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			#pinctrl-cells = <1>;
 			#gpio-range-cells = <3>;
 			ranges;
 
@@ -558,6 +561,7 @@
 			reg = <0x803800 0x2dc>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			#pinctrl-cells = <1>;
 			ranges;
 
 			pinctrl-single,register-width = <32>;
diff --git a/src/arm/hip01.dtsi b/src/arm/hip01.dtsi
index 4e9562f806a2..9d5fd5cfefa6 100644
--- a/src/arm/hip01.dtsi
+++ b/src/arm/hip01.dtsi
@@ -11,8 +11,6 @@
  * published by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
-
 / {
 	interrupt-parent = <&gic>;
 	#address-cells = <1>;
diff --git a/src/arm/hisi-x5hd2.dtsi b/src/arm/hisi-x5hd2.dtsi
index fdcc23d203e5..6c712a97e1fe 100644
--- a/src/arm/hisi-x5hd2.dtsi
+++ b/src/arm/hisi-x5hd2.dtsi
@@ -7,10 +7,12 @@
  * publishhed by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/hix5hd2-clock.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		serial0 = &uart0;
 	};
@@ -436,18 +438,20 @@
 		};
 
 		gmac0: ethernet@1840000 {
-			compatible = "hisilicon,hix5hd2-gmac";
+			compatible = "hisilicon,hix5hd2-gmac", "hisilicon,hisi-gmac-v1";
 			reg = <0x1840000 0x1000>,<0x184300c 0x4>;
 			interrupts = <0 71 4>;
 			clocks = <&clock HIX5HD2_MAC0_CLK>;
+			clock-names = "mac_core";
 			status = "disabled";
 		};
 
 		gmac1: ethernet@1841000 {
-			compatible = "hisilicon,hix5hd2-gmac";
+			compatible = "hisilicon,hix5hd2-gmac", "hisilicon,hisi-gmac-v1";
 			reg = <0x1841000 0x1000>,<0x1843010 0x4>;
 			interrupts = <0 72 4>;
 			clocks = <&clock HIX5HD2_MAC1_CLK>;
+			clock-names = "mac_core";
 			status = "disabled";
 		};
 
diff --git a/src/arm/imx1-ads.dts b/src/arm/imx1-ads.dts
index af4eee5794aa..f50498659cc3 100644
--- a/src/arm/imx1-ads.dts
+++ b/src/arm/imx1-ads.dts
@@ -66,14 +66,14 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/src/arm/imx1-apf9328.dts b/src/arm/imx1-apf9328.dts
index 07d92fb40e6f..e8b4b52c2418 100644
--- a/src/arm/imx1-apf9328.dts
+++ b/src/arm/imx1-apf9328.dts
@@ -34,14 +34,14 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/src/arm/imx1.dtsi b/src/arm/imx1.dtsi
index 22f5d1db5b31..2ee40bc9ec21 100644
--- a/src/arm/imx1.dtsi
+++ b/src/arm/imx1.dtsi
@@ -9,7 +9,6 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include "skeleton.dtsi"
 #include "imx1-pinfunc.h"
 
 #include <dt-bindings/clock/imx1-clock.h>
@@ -17,6 +16,17 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
+
 	aliases {
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
diff --git a/src/arm/imx23-sansa.dts b/src/arm/imx23-sansa.dts
new file mode 100644
index 000000000000..4ec32f4c7885
--- /dev/null
+++ b/src/arm/imx23-sansa.dts
@@ -0,0 +1,207 @@
+/*
+ * Copyright (C) 2013-2016 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx23.dtsi"
+
+/ {
+	model = "SanDisk Sansa Fuze+";
+	compatible = "sandisk,sansa_fuze_plus", "fsl,imx23";
+
+	memory {
+		reg = <0x40000000 0x04000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				cd-inverted;
+				status = "okay";
+			};
+
+			ssp1: ssp@80034000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc1_8bit_pins_a>;
+				bus-width = <8>;
+				vmmc-supply = <&reg_vddio_sd1>;
+				non-removable;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D08__GPIO_0_8
+						MX23_PAD_PWM3__GPIO_1_29
+						MX23_PAD_AUART1_RTS__GPIO_0_27
+						MX23_PAD_AUART1_CTS__GPIO_0_26
+						MX23_PAD_I2C_SCL__I2C_SCL
+						MX23_PAD_I2C_SDA__I2C_SDA
+						MX23_PAD_LCD_DOTCK__GPIO_1_22
+						MX23_PAD_LCD_HSYNC__GPIO_1_24
+						MX23_PAD_PWM3__GPIO_1_29
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm2_pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+
+			lradc@80050000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			dr_mode = "peripheral";
+			status = "okay";
+		};
+	};
+
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio0 8 0>;
+	};
+
+	reg_vddio_sd1: regulator-vddio-sd1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 29 0>;
+	};
+
+	reg_vdd_touchpad: regulator-vdd-touchpad0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-touchpad0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio0 26 0>;
+		regulator-always-on;
+		enable-active-low;
+	};
+
+	reg_vdd_tuner: regulator-vdd-tuner0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-tuner0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio0 29 0>;
+		regulator-always-on;
+		enable-active-low;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 2 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	i2c-0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		gpios = <
+			&gpio1 24 0		/* SDA */
+			&gpio1 22 0		/* SCL */
+		>;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+	};
+
+	i2c-1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		gpios = <
+			&gpio0 31 0		/* SDA */
+			&gpio0 30 0		/* SCL */
+		>;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+
+		touch: touch@20 {
+			compatible = "synaptics,synaptics_i2c";
+			reg = <0x20>;
+		};
+
+		eeprom: eeprom@50 {
+			compatible = "atmel,24c64";
+			reg = <0x50>;
+			pagesize = <32>;
+		};
+	};
+
+};
diff --git a/src/arm/imx23-xfi3.dts b/src/arm/imx23-xfi3.dts
new file mode 100644
index 000000000000..025cf949662d
--- /dev/null
+++ b/src/arm/imx23-xfi3.dts
@@ -0,0 +1,179 @@
+/*
+ * Copyright (C) 2013-2016 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx23.dtsi"
+
+/ {
+	model = "Creative ZEN X-Fi3";
+	compatible = "creative,x-fi3", "fsl,imx23";
+
+	memory {
+		reg = <0x40000000 0x04000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				cd-inverted;
+				status = "okay";
+			};
+
+			ssp1: ssp@80034000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc1_4bit_pins_a>;
+				bus-width = <4>;
+				non-removable;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D07__GPIO_0_7
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				key_pins_a: keys@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_ROTARYA__GPIO_2_7
+						MX23_PAD_ROTARYB__GPIO_2_8
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			i2c: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c_pins_a>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm2_pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			auart1: serial@8006e000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart1_2pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+
+			lradc@80050000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			dr_mode = "peripheral";
+			status = "okay";
+		};
+	};
+
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio0 7 0>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 2 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_a>;
+
+		voldown {
+			label = "volume-down";
+			linux,code = <114>;
+			gpios = <&gpio2 7 0>;
+			debounce-interval = <20>;
+		};
+
+		volup {
+			label = "volume-up";
+			linux,code = <115>;
+			gpios = <&gpio2 8 0>;
+			debounce-interval = <20>;
+		};
+	};
+};
diff --git a/src/arm/imx23.dtsi b/src/arm/imx23.dtsi
index 302d1168f424..43ccbbf754a3 100644
--- a/src/arm/imx23.dtsi
+++ b/src/arm/imx23.dtsi
@@ -9,11 +9,21 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include "skeleton.dtsi"
 #include "imx23-pinfunc.h"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	interrupt-parent = <&icoll>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		gpio0 = &gpio0;
@@ -111,6 +121,7 @@
 
 				gpio0: gpio@0 {
 					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					reg = <0>;
 					interrupts = <16>;
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -120,6 +131,7 @@
 
 				gpio1: gpio@1 {
 					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					reg = <1>;
 					interrupts = <17>;
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -129,6 +141,7 @@
 
 				gpio2: gpio@2 {
 					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					reg = <2>;
 					interrupts = <18>;
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -171,6 +184,17 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				auart1_2pins_a: auart1-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D14__AUART2_RX
+						MX23_PAD_GPMI_D15__AUART2_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
 				gpmi_pins_a: gpmi-nand@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -249,6 +273,40 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				mmc1_4bit_pins_a: mmc1-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D00__SSP2_DATA0
+						MX23_PAD_GPMI_D01__SSP2_DATA1
+						MX23_PAD_GPMI_D02__SSP2_DATA2
+						MX23_PAD_GPMI_D03__SSP2_DATA3
+						MX23_PAD_GPMI_RDY1__SSP2_CMD
+						MX23_PAD_GPMI_WRN__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc1_8bit_pins_a: mmc1-8bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D00__SSP2_DATA0
+						MX23_PAD_GPMI_D01__SSP2_DATA1
+						MX23_PAD_GPMI_D02__SSP2_DATA2
+						MX23_PAD_GPMI_D03__SSP2_DATA3
+						MX23_PAD_GPMI_D04__SSP2_DATA4
+						MX23_PAD_GPMI_D05__SSP2_DATA5
+						MX23_PAD_GPMI_D06__SSP2_DATA6
+						MX23_PAD_GPMI_D07__SSP2_DATA7
+						MX23_PAD_GPMI_RDY1__SSP2_CMD
+						MX23_PAD_GPMI_WRN__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
 				pwm2_pins_a: pwm2@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -416,7 +474,7 @@
 				reg = <0x80038000 0x2000>;
 				status = "disabled";
 			};
-                };
+		};
 
 		apbx@80040000 {
 			compatible = "simple-bus";
diff --git a/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts b/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts
index cda6907a27b9..9300711f1ea3 100644
--- a/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts
+++ b/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -161,14 +161,14 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/src/arm/imx25-pdk.dts b/src/arm/imx25-pdk.dts
index 9351296356dc..70292101ba03 100644
--- a/src/arm/imx25-pdk.dts
+++ b/src/arm/imx25-pdk.dts
@@ -298,7 +298,7 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/src/arm/imx25-pinfunc.h b/src/arm/imx25-pinfunc.h
index f96fa2df8f11..f840f03ad171 100644
--- a/src/arm/imx25-pinfunc.h
+++ b/src/arm/imx25-pinfunc.h
@@ -26,77 +26,77 @@
 #define MX25_PAD_A13__GPIO_4_1			0x00c 0x22C 0x000 0x05 0x000
 #define MX25_PAD_A13__LCDC_CLS			0x00c 0x22C 0x000 0x07 0x000
 
-#define MX25_PAD_A14__A14			0x010 0x230 0x000 0x10 0x000
-#define MX25_PAD_A14__GPIO_2_0			0x010 0x230 0x000 0x15 0x000
-#define MX25_PAD_A14__SIM1_CLK1			0x010 0x230 0x000 0x16 0x000
-#define MX25_PAD_A14__LCDC_SPL			0x010 0x230 0x000 0x17 0x000
-
-#define MX25_PAD_A15__A15			0x014 0x234 0x000 0x10 0x000
-#define MX25_PAD_A15__GPIO_2_1			0x014 0x234 0x000 0x15 0x000
-#define MX25_PAD_A15__SIM1_RST1			0x014 0x234 0x000 0x16 0x000
-#define MX25_PAD_A15__LCDC_PS			0x014 0x234 0x000 0x17 0x000
-
-#define MX25_PAD_A16__A16			0x018 0x000 0x000 0x10 0x000
-#define MX25_PAD_A16__GPIO_2_2			0x018 0x000 0x000 0x15 0x000
-#define MX25_PAD_A16__SIM1_VEN1			0x018 0x000 0x000 0x16 0x000
-#define MX25_PAD_A16__LCDC_REV			0x018 0x000 0x000 0x17 0x000
-
-#define MX25_PAD_A17__A17			0x01c 0x238 0x000 0x10 0x000
-#define MX25_PAD_A17__GPIO_2_3			0x01c 0x238 0x000 0x15 0x000
-#define MX25_PAD_A17__SIM1_TX			0x01c 0x238 0x554 0x16 0x000
-#define MX25_PAD_A17__FEC_TX_ERR		0x01c 0x238 0x000 0x17 0x000
-
-#define MX25_PAD_A18__A18			0x020 0x23c 0x000 0x10 0x000
-#define MX25_PAD_A18__GPIO_2_4			0x020 0x23c 0x000 0x15 0x000
-#define MX25_PAD_A18__SIM1_PD1			0x020 0x23c 0x550 0x16 0x000
-#define MX25_PAD_A18__FEC_COL			0x020 0x23c 0x504 0x17 0x000
-
-#define MX25_PAD_A19__A19			0x024 0x240 0x000 0x10 0x000
-#define MX25_PAD_A19__GPIO_2_5			0x024 0x240 0x000 0x15 0x000
-#define MX25_PAD_A19__SIM1_RX1			0x024 0x240 0x54c 0x16 0x000
-#define MX25_PAD_A19__FEC_RX_ERR		0x024 0x240 0x518 0x17 0x000
-
-#define MX25_PAD_A20__A20			0x028 0x244 0x000 0x10 0x000
-#define MX25_PAD_A20__GPIO_2_6			0x028 0x244 0x000 0x15 0x000
-#define MX25_PAD_A20__SIM2_CLK1			0x028 0x244 0x000 0x16 0x000
-#define MX25_PAD_A20__FEC_RDATA2		0x028 0x244 0x50c 0x17 0x000
-
-#define MX25_PAD_A21__A21			0x02c 0x248 0x000 0x10 0x000
-#define MX25_PAD_A21__GPIO_2_7			0x02c 0x248 0x000 0x15 0x000
-#define MX25_PAD_A21__SIM2_RST1			0x02c 0x248 0x000 0x16 0x000
-#define MX25_PAD_A21__FEC_RDATA3		0x02c 0x248 0x510 0x17 0x000
-
-#define MX25_PAD_A22__A22			0x030 0x000 0x000 0x10 0x000
-#define MX25_PAD_A22__GPIO_2_8			0x030 0x000 0x000 0x15 0x000
-#define MX25_PAD_A22__FEC_TDATA2		0x030 0x000 0x000 0x17 0x000
-#define MX25_PAD_A22__SIM2_VEN1			0x030 0x000 0x000 0x16 0x000
-#define MX25_PAD_A22__FEC_TDATA2		0x030 0x000 0x000 0x17 0x000
-
-#define MX25_PAD_A23__A23			0x034 0x24c 0x000 0x10 0x000
-#define MX25_PAD_A23__GPIO_2_9			0x034 0x24c 0x000 0x15 0x000
-#define MX25_PAD_A23__SIM2_TX1			0x034 0x24c 0x560 0x16 0x000
-#define MX25_PAD_A23__FEC_TDATA3		0x034 0x24c 0x000 0x17 0x000
-
-#define MX25_PAD_A24__A24			0x038 0x250 0x000 0x10 0x000
-#define MX25_PAD_A24__GPIO_2_10			0x038 0x250 0x000 0x15 0x000
-#define MX25_PAD_A24__SIM2_PD1			0x038 0x250 0x55c 0x16 0x000
-#define MX25_PAD_A24__FEC_RX_CLK		0x038 0x250 0x514 0x17 0x000
-
-#define MX25_PAD_A25__A25			0x03c 0x254 0x000 0x10 0x000
-#define MX25_PAD_A25__GPIO_2_11			0x03c 0x254 0x000 0x15 0x000
-#define MX25_PAD_A25__FEC_CRS			0x03c 0x254 0x508 0x17 0x000
-
-#define MX25_PAD_EB0__EB0			0x040 0x258 0x000 0x10 0x000
-#define MX25_PAD_EB0__AUD4_TXD			0x040 0x258 0x464 0x14 0x000
-#define MX25_PAD_EB0__GPIO_2_12			0x040 0x258 0x000 0x15 0x000
-
-#define MX25_PAD_EB1__EB1			0x044 0x25c 0x000 0x10 0x000
-#define MX25_PAD_EB1__AUD4_RXD			0x044 0x25c 0x460 0x14 0x000
-#define MX25_PAD_EB1__GPIO_2_13			0x044 0x25c 0x000 0x15 0x000
-
-#define MX25_PAD_OE__OE				0x048 0x260 0x000 0x10 0x000
-#define MX25_PAD_OE__AUD4_TXC			0x048 0x260 0x000 0x14 0x000
-#define MX25_PAD_OE__GPIO_2_14			0x048 0x260 0x000 0x15 0x000
+#define MX25_PAD_A14__A14			0x010 0x230 0x000 0x00 0x000
+#define MX25_PAD_A14__GPIO_2_0			0x010 0x230 0x000 0x05 0x000
+#define MX25_PAD_A14__SIM1_CLK1			0x010 0x230 0x000 0x06 0x000
+#define MX25_PAD_A14__LCDC_SPL			0x010 0x230 0x000 0x07 0x000
+
+#define MX25_PAD_A15__A15			0x014 0x234 0x000 0x00 0x000
+#define MX25_PAD_A15__GPIO_2_1			0x014 0x234 0x000 0x05 0x000
+#define MX25_PAD_A15__SIM1_RST1			0x014 0x234 0x000 0x06 0x000
+#define MX25_PAD_A15__LCDC_PS			0x014 0x234 0x000 0x07 0x000
+
+#define MX25_PAD_A16__A16			0x018 0x000 0x000 0x00 0x000
+#define MX25_PAD_A16__GPIO_2_2			0x018 0x000 0x000 0x05 0x000
+#define MX25_PAD_A16__SIM1_VEN1			0x018 0x000 0x000 0x06 0x000
+#define MX25_PAD_A16__LCDC_REV			0x018 0x000 0x000 0x07 0x000
+
+#define MX25_PAD_A17__A17			0x01c 0x238 0x000 0x00 0x000
+#define MX25_PAD_A17__GPIO_2_3			0x01c 0x238 0x000 0x05 0x000
+#define MX25_PAD_A17__SIM1_TX			0x01c 0x238 0x554 0x06 0x000
+#define MX25_PAD_A17__FEC_TX_ERR		0x01c 0x238 0x000 0x07 0x000
+
+#define MX25_PAD_A18__A18			0x020 0x23c 0x000 0x00 0x000
+#define MX25_PAD_A18__GPIO_2_4			0x020 0x23c 0x000 0x05 0x000
+#define MX25_PAD_A18__SIM1_PD1			0x020 0x23c 0x550 0x06 0x000
+#define MX25_PAD_A18__FEC_COL			0x020 0x23c 0x504 0x07 0x000
+
+#define MX25_PAD_A19__A19			0x024 0x240 0x000 0x00 0x000
+#define MX25_PAD_A19__GPIO_2_5			0x024 0x240 0x000 0x05 0x000
+#define MX25_PAD_A19__SIM1_RX1			0x024 0x240 0x54c 0x06 0x000
+#define MX25_PAD_A19__FEC_RX_ERR		0x024 0x240 0x518 0x07 0x000
+
+#define MX25_PAD_A20__A20			0x028 0x244 0x000 0x00 0x000
+#define MX25_PAD_A20__GPIO_2_6			0x028 0x244 0x000 0x05 0x000
+#define MX25_PAD_A20__SIM2_CLK1			0x028 0x244 0x000 0x06 0x000
+#define MX25_PAD_A20__FEC_RDATA2		0x028 0x244 0x50c 0x07 0x000
+
+#define MX25_PAD_A21__A21			0x02c 0x248 0x000 0x00 0x000
+#define MX25_PAD_A21__GPIO_2_7			0x02c 0x248 0x000 0x05 0x000
+#define MX25_PAD_A21__SIM2_RST1			0x02c 0x248 0x000 0x06 0x000
+#define MX25_PAD_A21__FEC_RDATA3		0x02c 0x248 0x510 0x07 0x000
+
+#define MX25_PAD_A22__A22			0x030 0x000 0x000 0x00 0x000
+#define MX25_PAD_A22__GPIO_2_8			0x030 0x000 0x000 0x05 0x000
+#define MX25_PAD_A22__FEC_TDATA2		0x030 0x000 0x000 0x07 0x000
+#define MX25_PAD_A22__SIM2_VEN1			0x030 0x000 0x000 0x06 0x000
+#define MX25_PAD_A22__FEC_TDATA2		0x030 0x000 0x000 0x07 0x000
+
+#define MX25_PAD_A23__A23			0x034 0x24c 0x000 0x00 0x000
+#define MX25_PAD_A23__GPIO_2_9			0x034 0x24c 0x000 0x05 0x000
+#define MX25_PAD_A23__SIM2_TX1			0x034 0x24c 0x560 0x06 0x000
+#define MX25_PAD_A23__FEC_TDATA3		0x034 0x24c 0x000 0x07 0x000
+
+#define MX25_PAD_A24__A24			0x038 0x250 0x000 0x00 0x000
+#define MX25_PAD_A24__GPIO_2_10			0x038 0x250 0x000 0x05 0x000
+#define MX25_PAD_A24__SIM2_PD1			0x038 0x250 0x55c 0x06 0x000
+#define MX25_PAD_A24__FEC_RX_CLK		0x038 0x250 0x514 0x07 0x000
+
+#define MX25_PAD_A25__A25			0x03c 0x254 0x000 0x00 0x000
+#define MX25_PAD_A25__GPIO_2_11			0x03c 0x254 0x000 0x05 0x000
+#define MX25_PAD_A25__FEC_CRS			0x03c 0x254 0x508 0x07 0x000
+
+#define MX25_PAD_EB0__EB0			0x040 0x258 0x000 0x00 0x000
+#define MX25_PAD_EB0__AUD4_TXD			0x040 0x258 0x464 0x04 0x000
+#define MX25_PAD_EB0__GPIO_2_12			0x040 0x258 0x000 0x05 0x000
+
+#define MX25_PAD_EB1__EB1			0x044 0x25c 0x000 0x00 0x000
+#define MX25_PAD_EB1__AUD4_RXD			0x044 0x25c 0x460 0x04 0x000
+#define MX25_PAD_EB1__GPIO_2_13			0x044 0x25c 0x000 0x05 0x000
+
+#define MX25_PAD_OE__OE				0x048 0x260 0x000 0x00 0x000
+#define MX25_PAD_OE__AUD4_TXC			0x048 0x260 0x000 0x04 0x000
+#define MX25_PAD_OE__GPIO_2_14			0x048 0x260 0x000 0x05 0x000
 
 #define MX25_PAD_CS0__CS0			0x04c 0x000 0x000 0x00 0x000
 #define MX25_PAD_CS0__GPIO_4_2			0x04c 0x000 0x000 0x05 0x000
@@ -105,51 +105,51 @@
 #define MX25_PAD_CS1__NF_CE3			0x050 0x000 0x000 0x01 0x000
 #define MX25_PAD_CS1__GPIO_4_3			0x050 0x000 0x000 0x05 0x000
 
-#define MX25_PAD_CS4__CS4			0x054 0x264 0x000 0x10 0x000
+#define MX25_PAD_CS4__CS4			0x054 0x264 0x000 0x00 0x000
 #define MX25_PAD_CS4__NF_CE1			0x054 0x264 0x000 0x01 0x000
-#define MX25_PAD_CS4__UART5_CTS			0x054 0x264 0x000 0x13 0x000
-#define MX25_PAD_CS4__GPIO_3_20			0x054 0x264 0x000 0x15 0x000
+#define MX25_PAD_CS4__UART5_CTS			0x054 0x264 0x000 0x03 0x000
+#define MX25_PAD_CS4__GPIO_3_20			0x054 0x264 0x000 0x05 0x000
 
 #define MX25_PAD_CS5__CS5			0x058 0x268 0x000 0x00 0x000
 #define MX25_PAD_CS5__NF_CE2			0x058 0x268 0x000 0x01 0x000
 #define MX25_PAD_CS5__UART5_RTS			0x058 0x268 0x574 0x03 0x000
 #define MX25_PAD_CS5__GPIO_3_21			0x058 0x268 0x000 0x05 0x000
 
-#define MX25_PAD_NF_CE0__NF_CE0			0x05c 0x26c 0x000 0x10 0x000
-#define MX25_PAD_NF_CE0__GPIO_3_22		0x05c 0x26c 0x000 0x15 0x000
+#define MX25_PAD_NF_CE0__NF_CE0			0x05c 0x26c 0x000 0x00 0x000
+#define MX25_PAD_NF_CE0__GPIO_3_22		0x05c 0x26c 0x000 0x05 0x000
 
-#define MX25_PAD_ECB__ECB			0x060 0x270 0x000 0x10 0x000
-#define MX25_PAD_ECB__UART5_TXD			0x060 0x270 0x000 0x13 0x000
-#define MX25_PAD_ECB__GPIO_3_23			0x060 0x270 0x000 0x15 0x000
+#define MX25_PAD_ECB__ECB			0x060 0x270 0x000 0x00 0x000
+#define MX25_PAD_ECB__UART5_TXD			0x060 0x270 0x000 0x03 0x000
+#define MX25_PAD_ECB__GPIO_3_23			0x060 0x270 0x000 0x05 0x000
 
-#define MX25_PAD_LBA__LBA			0x064 0x274 0x000 0x10 0x000
-#define MX25_PAD_LBA__UART5_RXD			0x064 0x274 0x578 0x13 0x000
-#define MX25_PAD_LBA__GPIO_3_24			0x064 0x274 0x000 0x15 0x000
+#define MX25_PAD_LBA__LBA			0x064 0x274 0x000 0x00 0x000
+#define MX25_PAD_LBA__UART5_RXD			0x064 0x274 0x578 0x03 0x000
+#define MX25_PAD_LBA__GPIO_3_24			0x064 0x274 0x000 0x05 0x000
 
 #define MX25_PAD_BCLK__BCLK			0x068 0x000 0x000 0x00 0x000
 #define MX25_PAD_BCLK__GPIO_4_4			0x068 0x000 0x000 0x05 0x000
 
-#define MX25_PAD_RW__RW				0x06c 0x278 0x000 0x10 0x000
-#define MX25_PAD_RW__AUD4_TXFS			0x06c 0x278 0x474 0x14 0x000
-#define MX25_PAD_RW__GPIO_3_25			0x06c 0x278 0x000 0x15 0x000
+#define MX25_PAD_RW__RW				0x06c 0x278 0x000 0x00 0x000
+#define MX25_PAD_RW__AUD4_TXFS			0x06c 0x278 0x474 0x04 0x000
+#define MX25_PAD_RW__GPIO_3_25			0x06c 0x278 0x000 0x05 0x000
 
-#define MX25_PAD_NFWE_B__NFWE_B			0x070 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFWE_B__GPIO_3_26		0x070 0x000 0x000 0x15 0x000
+#define MX25_PAD_NFWE_B__NFWE_B			0x070 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFWE_B__GPIO_3_26		0x070 0x000 0x000 0x05 0x000
 
-#define MX25_PAD_NFRE_B__NFRE_B			0x074 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFRE_B__GPIO_3_27		0x074 0x000 0x000 0x15 0x000
+#define MX25_PAD_NFRE_B__NFRE_B			0x074 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFRE_B__GPIO_3_27		0x074 0x000 0x000 0x05 0x000
 
-#define MX25_PAD_NFALE__NFALE			0x078 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFALE__GPIO_3_28		0x078 0x000 0x000 0x15 0x000
+#define MX25_PAD_NFALE__NFALE			0x078 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFALE__GPIO_3_28		0x078 0x000 0x000 0x05 0x000
 
-#define MX25_PAD_NFCLE__NFCLE			0x07c 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFCLE__GPIO_3_29		0x07c 0x000 0x000 0x15 0x000
+#define MX25_PAD_NFCLE__NFCLE			0x07c 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFCLE__GPIO_3_29		0x07c 0x000 0x000 0x05 0x000
 
-#define MX25_PAD_NFWP_B__NFWP_B			0x080 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFWP_B__GPIO_3_30		0x080 0x000 0x000 0x15 0x000
+#define MX25_PAD_NFWP_B__NFWP_B			0x080 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFWP_B__GPIO_3_30		0x080 0x000 0x000 0x05 0x000
 
-#define MX25_PAD_NFRB__NFRB			0x084 0x27c 0x000 0x10 0x000
-#define MX25_PAD_NFRB__GPIO_3_31		0x084 0x27c 0x000 0x15 0x000
+#define MX25_PAD_NFRB__NFRB			0x084 0x27c 0x000 0x00 0x000
+#define MX25_PAD_NFRB__GPIO_3_31		0x084 0x27c 0x000 0x05 0x000
 
 #define MX25_PAD_D15__D15			0x088 0x280 0x000 0x00 0x000
 #define MX25_PAD_D15__LD16			0x088 0x280 0x000 0x01 0x000
@@ -210,101 +210,101 @@
 #define MX25_PAD_D0__D0				0x0c4 0x2bc 0x000 0x00 0x000
 #define MX25_PAD_D0__GPIO_4_20			0x0c4 0x2bc 0x000 0x05 0x000
 
-#define MX25_PAD_LD0__LD0			0x0c8 0x2c0 0x000 0x10 0x000
-#define MX25_PAD_LD0__CSI_D0			0x0c8 0x2c0 0x488 0x12 0x000
-#define MX25_PAD_LD0__GPIO_2_15			0x0c8 0x2c0 0x000 0x15 0x000
+#define MX25_PAD_LD0__LD0			0x0c8 0x2c0 0x000 0x00 0x000
+#define MX25_PAD_LD0__CSI_D0			0x0c8 0x2c0 0x488 0x02 0x000
+#define MX25_PAD_LD0__GPIO_2_15			0x0c8 0x2c0 0x000 0x05 0x000
 
-#define MX25_PAD_LD1__LD1			0x0cc 0x2c4 0x000 0x10 0x000
-#define MX25_PAD_LD1__CSI_D1			0x0cc 0x2c4 0x48c 0x12 0x000
-#define MX25_PAD_LD1__GPIO_2_16			0x0cc 0x2c4 0x000 0x15 0x000
+#define MX25_PAD_LD1__LD1			0x0cc 0x2c4 0x000 0x00 0x000
+#define MX25_PAD_LD1__CSI_D1			0x0cc 0x2c4 0x48c 0x02 0x000
+#define MX25_PAD_LD1__GPIO_2_16			0x0cc 0x2c4 0x000 0x05 0x000
 
-#define MX25_PAD_LD2__LD2			0x0d0 0x2c8 0x000 0x10 0x000
-#define MX25_PAD_LD2__GPIO_2_17			0x0d0 0x2c8 0x000 0x15 0x000
+#define MX25_PAD_LD2__LD2			0x0d0 0x2c8 0x000 0x00 0x000
+#define MX25_PAD_LD2__GPIO_2_17			0x0d0 0x2c8 0x000 0x05 0x000
 
-#define MX25_PAD_LD3__LD3			0x0d4 0x2cc 0x000 0x10 0x000
-#define MX25_PAD_LD3__GPIO_2_18			0x0d4 0x2cc 0x000 0x15 0x000
+#define MX25_PAD_LD3__LD3			0x0d4 0x2cc 0x000 0x00 0x000
+#define MX25_PAD_LD3__GPIO_2_18			0x0d4 0x2cc 0x000 0x05 0x000
 
-#define MX25_PAD_LD4__LD4			0x0d8 0x2d0 0x000 0x10 0x000
-#define MX25_PAD_LD4__GPIO_2_19			0x0d8 0x2d0 0x000 0x15 0x000
+#define MX25_PAD_LD4__LD4			0x0d8 0x2d0 0x000 0x00 0x000
+#define MX25_PAD_LD4__GPIO_2_19			0x0d8 0x2d0 0x000 0x05 0x000
 
-#define MX25_PAD_LD5__LD5			0x0dc 0x2d4 0x000 0x10 0x000
-#define MX25_PAD_LD5__GPIO_1_19			0x0dc 0x2d4 0x000 0x15 0x000
+#define MX25_PAD_LD5__LD5			0x0dc 0x2d4 0x000 0x00 0x000
+#define MX25_PAD_LD5__GPIO_1_19			0x0dc 0x2d4 0x000 0x05 0x000
 
-#define MX25_PAD_LD6__LD6			0x0e0 0x2d8 0x000 0x10 0x000
-#define MX25_PAD_LD6__GPIO_1_20			0x0e0 0x2d8 0x000 0x15 0x000
+#define MX25_PAD_LD6__LD6			0x0e0 0x2d8 0x000 0x00 0x000
+#define MX25_PAD_LD6__GPIO_1_20			0x0e0 0x2d8 0x000 0x05 0x000
 
-#define MX25_PAD_LD7__LD7			0x0e4 0x2dc 0x000 0x10 0x000
-#define MX25_PAD_LD7__GPIO_1_21			0x0e4 0x2dc 0x000 0x15 0x000
+#define MX25_PAD_LD7__LD7			0x0e4 0x2dc 0x000 0x00 0x000
+#define MX25_PAD_LD7__GPIO_1_21			0x0e4 0x2dc 0x000 0x05 0x000
 
-#define MX25_PAD_LD8__LD8			0x0e8 0x2e0 0x000 0x10 0x000
-#define MX25_PAD_LD8__UART4_RXD			0x0e8 0x2e0 0x570 0x12 0x000
-#define MX25_PAD_LD8__FEC_TX_ERR		0x0e8 0x2e0 0x000 0x15 0x000
+#define MX25_PAD_LD8__LD8			0x0e8 0x2e0 0x000 0x00 0x000
+#define MX25_PAD_LD8__UART4_RXD			0x0e8 0x2e0 0x570 0x02 0x000
+#define MX25_PAD_LD8__FEC_TX_ERR		0x0e8 0x2e0 0x000 0x05 0x000
 #define MX25_PAD_LD8__SDHC2_CMD			0x0e8 0x2e0 0x4e0 0x06 0x000
 
-#define MX25_PAD_LD9__LD9			0x0ec 0x2e4 0x000 0x10 0x000
-#define MX25_PAD_LD9__UART4_TXD			0x0ec 0x2e4 0x000 0x12 0x000
-#define MX25_PAD_LD9__FEC_COL			0x0ec 0x2e4 0x504 0x15 0x001
+#define MX25_PAD_LD9__LD9			0x0ec 0x2e4 0x000 0x00 0x000
+#define MX25_PAD_LD9__UART4_TXD			0x0ec 0x2e4 0x000 0x02 0x000
+#define MX25_PAD_LD9__FEC_COL			0x0ec 0x2e4 0x504 0x05 0x001
 #define MX25_PAD_LD9__SDHC2_CLK			0x0ec 0x2e4 0x4dc 0x06 0x000
 
 #define MX25_PAD_LD10__LD10			0x0f0 0x2e8 0x000 0x00 0x000
 #define MX25_PAD_LD10__UART4_RTS		0x0f0 0x2e8 0x56c 0x02 0x000
 #define MX25_PAD_LD10__FEC_RX_ERR		0x0f0 0x2e8 0x518 0x05 0x001
 
-#define MX25_PAD_LD11__LD11			0x0f4 0x2ec 0x000 0x10 0x000
-#define MX25_PAD_LD11__UART4_CTS		0x0f4 0x2ec 0x000 0x12 0x000
-#define MX25_PAD_LD11__FEC_RDATA2		0x0f4 0x2ec 0x50c 0x15 0x001
+#define MX25_PAD_LD11__LD11			0x0f4 0x2ec 0x000 0x00 0x000
+#define MX25_PAD_LD11__UART4_CTS		0x0f4 0x2ec 0x000 0x02 0x000
+#define MX25_PAD_LD11__FEC_RDATA2		0x0f4 0x2ec 0x50c 0x05 0x001
 #define MX25_PAD_LD11__SDHC2_DAT1		0x0f4 0x2ec 0x4e8 0x06 0x000
 
-#define MX25_PAD_LD12__LD12			0x0f8 0x2f0 0x000 0x10 0x000
+#define MX25_PAD_LD12__LD12			0x0f8 0x2f0 0x000 0x00 0x000
 #define MX25_PAD_LD12__CSPI2_MOSI		0x0f8 0x2f0 0x4a0 0x02 0x000
-#define MX25_PAD_LD12__FEC_RDATA3		0x0f8 0x2f0 0x510 0x15 0x001
+#define MX25_PAD_LD12__FEC_RDATA3		0x0f8 0x2f0 0x510 0x05 0x001
 
-#define MX25_PAD_LD13__LD13			0x0fc 0x2f4 0x000 0x10 0x000
+#define MX25_PAD_LD13__LD13			0x0fc 0x2f4 0x000 0x00 0x000
 #define MX25_PAD_LD13__CSPI2_MISO		0x0fc 0x2f4 0x49c 0x02 0x000
-#define MX25_PAD_LD13__FEC_TDATA2		0x0fc 0x2f4 0x000 0x15 0x000
+#define MX25_PAD_LD13__FEC_TDATA2		0x0fc 0x2f4 0x000 0x05 0x000
 
-#define MX25_PAD_LD14__LD14			0x100 0x2f8 0x000 0x10 0x000
+#define MX25_PAD_LD14__LD14			0x100 0x2f8 0x000 0x00 0x000
 #define MX25_PAD_LD14__CSPI2_SCLK		0x100 0x2f8 0x494 0x02 0x000
-#define MX25_PAD_LD14__FEC_TDATA3		0x100 0x2f8 0x000 0x15 0x000
+#define MX25_PAD_LD14__FEC_TDATA3		0x100 0x2f8 0x000 0x05 0x000
 
-#define MX25_PAD_LD15__LD15			0x104 0x2fc 0x000 0x10 0x000
+#define MX25_PAD_LD15__LD15			0x104 0x2fc 0x000 0x00 0x000
 #define MX25_PAD_LD15__CSPI2_RDY		0x104 0x2fc 0x498 0x02 0x000
-#define MX25_PAD_LD15__FEC_RX_CLK		0x104 0x2fc 0x514 0x15 0x001
+#define MX25_PAD_LD15__FEC_RX_CLK		0x104 0x2fc 0x514 0x05 0x001
 
-#define MX25_PAD_HSYNC__HSYNC			0x108 0x300 0x000 0x10 0x000
-#define MX25_PAD_HSYNC__GPIO_1_22		0x108 0x300 0x000 0x15 0x000
+#define MX25_PAD_HSYNC__HSYNC			0x108 0x300 0x000 0x00 0x000
+#define MX25_PAD_HSYNC__GPIO_1_22		0x108 0x300 0x000 0x05 0x000
 
-#define MX25_PAD_VSYNC__VSYNC			0x10c 0x304 0x000 0x10 0x000
-#define MX25_PAD_VSYNC__GPIO_1_23		0x10c 0x304 0x000 0x15 0x000
+#define MX25_PAD_VSYNC__VSYNC			0x10c 0x304 0x000 0x00 0x000
+#define MX25_PAD_VSYNC__GPIO_1_23		0x10c 0x304 0x000 0x05 0x000
 
-#define MX25_PAD_LSCLK__LSCLK			0x110 0x308 0x000 0x10 0x000
-#define MX25_PAD_LSCLK__GPIO_1_24		0x110 0x308 0x000 0x15 0x000
+#define MX25_PAD_LSCLK__LSCLK			0x110 0x308 0x000 0x00 0x000
+#define MX25_PAD_LSCLK__GPIO_1_24		0x110 0x308 0x000 0x05 0x000
 
-#define MX25_PAD_OE_ACD__OE_ACD			0x114 0x30c 0x000 0x10 0x000
+#define MX25_PAD_OE_ACD__OE_ACD			0x114 0x30c 0x000 0x00 0x000
 #define MX25_PAD_OE_ACD__CSPI2_SS0		0x114 0x30c 0x4a4 0x02 0x000
-#define MX25_PAD_OE_ACD__GPIO_1_25		0x114 0x30c 0x000 0x15 0x000
+#define MX25_PAD_OE_ACD__GPIO_1_25		0x114 0x30c 0x000 0x05 0x000
 
-#define MX25_PAD_CONTRAST__CONTRAST		0x118 0x310 0x000 0x10 0x000
-#define MX25_PAD_CONTRAST__CC4			0x118 0x310 0x000 0x11 0x000
-#define MX25_PAD_CONTRAST__PWM4_PWMO		0x118 0x310 0x000 0x14 0x000
-#define MX25_PAD_CONTRAST__FEC_CRS		0x118 0x310 0x508 0x15 0x001
-#define MX25_PAD_CONTRAST__USBH2_PWR		0x118 0x310 0x000 0x16 0x000
+#define MX25_PAD_CONTRAST__CONTRAST		0x118 0x310 0x000 0x00 0x000
+#define MX25_PAD_CONTRAST__CC4			0x118 0x310 0x000 0x01 0x000
+#define MX25_PAD_CONTRAST__PWM4_PWMO		0x118 0x310 0x000 0x04 0x000
+#define MX25_PAD_CONTRAST__FEC_CRS		0x118 0x310 0x508 0x05 0x001
+#define MX25_PAD_CONTRAST__USBH2_PWR		0x118 0x310 0x000 0x06 0x000
 
-#define MX25_PAD_PWM__PWM			0x11c 0x314 0x000 0x10 0x000
-#define MX25_PAD_PWM__GPIO_1_26			0x11c 0x314 0x000 0x15 0x000
-#define MX25_PAD_PWM__USBH2_OC			0x11c 0x314 0x580 0x16 0x001
+#define MX25_PAD_PWM__PWM			0x11c 0x314 0x000 0x00 0x000
+#define MX25_PAD_PWM__GPIO_1_26			0x11c 0x314 0x000 0x05 0x000
+#define MX25_PAD_PWM__USBH2_OC			0x11c 0x314 0x580 0x06 0x001
 
-#define MX25_PAD_CSI_D2__CSI_D2			0x120 0x318 0x000 0x10 0x000
-#define MX25_PAD_CSI_D2__UART5_RXD		0x120 0x318 0x578 0x11 0x001
+#define MX25_PAD_CSI_D2__CSI_D2			0x120 0x318 0x000 0x00 0x000
+#define MX25_PAD_CSI_D2__UART5_RXD		0x120 0x318 0x578 0x01 0x001
 #define MX25_PAD_CSI_D2__SIM1_CLK0		0x120 0x318 0x000 0x04 0x000
-#define MX25_PAD_CSI_D2__GPIO_1_27		0x120 0x318 0x000 0x15 0x000
-#define MX25_PAD_CSI_D2__CSPI3_MOSI		0x120 0x318 0x000 0x17 0x000
+#define MX25_PAD_CSI_D2__GPIO_1_27		0x120 0x318 0x000 0x05 0x000
+#define MX25_PAD_CSI_D2__CSPI3_MOSI		0x120 0x318 0x000 0x07 0x000
 
-#define MX25_PAD_CSI_D3__CSI_D3			0x124 0x31c 0x000 0x10 0x000
-#define MX25_PAD_CSI_D3__UART5_TXD		0x124 0x31c 0x000 0x11 0x000
+#define MX25_PAD_CSI_D3__CSI_D3			0x124 0x31c 0x000 0x00 0x000
+#define MX25_PAD_CSI_D3__UART5_TXD		0x124 0x31c 0x000 0x01 0x000
 #define MX25_PAD_CSI_D3__SIM1_RST0		0x124 0x31c 0x000 0x04 0x000
-#define MX25_PAD_CSI_D3__GPIO_1_28		0x124 0x31c 0x000 0x15 0x000
-#define MX25_PAD_CSI_D3__CSPI3_MISO		0x124 0x31c 0x4b4 0x17 0x001
+#define MX25_PAD_CSI_D3__GPIO_1_28		0x124 0x31c 0x000 0x05 0x000
+#define MX25_PAD_CSI_D3__CSPI3_MISO		0x124 0x31c 0x4b4 0x07 0x001
 
 #define MX25_PAD_CSI_D4__CSI_D4			0x128 0x320 0x000 0x00 0x000
 #define MX25_PAD_CSI_D4__UART5_RTS		0x128 0x320 0x574 0x01 0x001
@@ -312,80 +312,80 @@
 #define MX25_PAD_CSI_D4__GPIO_1_29		0x128 0x320 0x000 0x05 0x000
 #define MX25_PAD_CSI_D4__CSPI3_SCLK		0x128 0x320 0x000 0x07 0x000
 
-#define MX25_PAD_CSI_D5__CSI_D5			0x12c 0x324 0x000 0x10 0x000
-#define MX25_PAD_CSI_D5__UART5_CTS		0x12c 0x324 0x000 0x11 0x000
+#define MX25_PAD_CSI_D5__CSI_D5			0x12c 0x324 0x000 0x00 0x000
+#define MX25_PAD_CSI_D5__UART5_CTS		0x12c 0x324 0x000 0x01 0x000
 #define MX25_PAD_CSI_D5__SIM1_TX0		0x12c 0x324 0x000 0x04 0x000
-#define MX25_PAD_CSI_D5__GPIO_1_30		0x12c 0x324 0x000 0x15 0x000
-#define MX25_PAD_CSI_D5__CSPI3_RDY		0x12c 0x324 0x000 0x17 0x000
+#define MX25_PAD_CSI_D5__GPIO_1_30		0x12c 0x324 0x000 0x05 0x000
+#define MX25_PAD_CSI_D5__CSPI3_RDY		0x12c 0x324 0x000 0x07 0x000
 
-#define MX25_PAD_CSI_D6__CSI_D6			0x130 0x328 0x000 0x10 0x000
-#define MX25_PAD_CSI_D6__SDHC2_CMD		0x130 0x328 0x4e0 0x12 0x001
+#define MX25_PAD_CSI_D6__CSI_D6			0x130 0x328 0x000 0x00 0x000
+#define MX25_PAD_CSI_D6__SDHC2_CMD		0x130 0x328 0x4e0 0x02 0x001
 #define MX25_PAD_CSI_D6__SIM1_PD0		0x130 0x328 0x000 0x04 0x000
-#define MX25_PAD_CSI_D6__GPIO_1_31		0x130 0x328 0x000 0x15 0x000
+#define MX25_PAD_CSI_D6__GPIO_1_31		0x130 0x328 0x000 0x05 0x000
 
-#define MX25_PAD_CSI_D7__CSI_D7			0x134 0x32c 0x000 0x10 0x000
-#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK		0x134 0x32C 0x4dc 0x12 0x001
-#define MX25_PAD_CSI_D7__GPIO_1_6		0x134 0x32c 0x000 0x15 0x000
+#define MX25_PAD_CSI_D7__CSI_D7			0x134 0x32c 0x000 0x00 0x000
+#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK		0x134 0x32C 0x4dc 0x02 0x001
+#define MX25_PAD_CSI_D7__GPIO_1_6		0x134 0x32c 0x000 0x05 0x000
 
-#define MX25_PAD_CSI_D8__CSI_D8			0x138 0x330 0x000 0x10 0x000
-#define MX25_PAD_CSI_D8__AUD6_RXC		0x138 0x330 0x000 0x12 0x000
-#define MX25_PAD_CSI_D8__GPIO_1_7		0x138 0x330 0x000 0x15 0x000
-#define MX25_PAD_CSI_D8__CSPI3_SS2		0x138 0x330 0x4c4 0x17 0x000
+#define MX25_PAD_CSI_D8__CSI_D8			0x138 0x330 0x000 0x00 0x000
+#define MX25_PAD_CSI_D8__AUD6_RXC		0x138 0x330 0x000 0x02 0x000
+#define MX25_PAD_CSI_D8__GPIO_1_7		0x138 0x330 0x000 0x05 0x000
+#define MX25_PAD_CSI_D8__CSPI3_SS2		0x138 0x330 0x4c4 0x07 0x000
 
-#define MX25_PAD_CSI_D9__CSI_D9			0x13c 0x334 0x000 0x10 0x000
-#define MX25_PAD_CSI_D9__AUD6_RXFS		0x13c 0x334 0x000 0x12 0x000
-#define MX25_PAD_CSI_D9__GPIO_4_21		0x13c 0x334 0x000 0x15 0x000
-#define MX25_PAD_CSI_D9__CSPI3_SS3		0x13c 0x334 0x4c8 0x17 0x000
+#define MX25_PAD_CSI_D9__CSI_D9			0x13c 0x334 0x000 0x00 0x000
+#define MX25_PAD_CSI_D9__AUD6_RXFS		0x13c 0x334 0x000 0x02 0x000
+#define MX25_PAD_CSI_D9__GPIO_4_21		0x13c 0x334 0x000 0x05 0x000
+#define MX25_PAD_CSI_D9__CSPI3_SS3		0x13c 0x334 0x4c8 0x07 0x000
 
-#define MX25_PAD_CSI_MCLK__CSI_MCLK		0x140 0x338 0x000 0x10 0x000
-#define MX25_PAD_CSI_MCLK__AUD6_TXD		0x140 0x338 0x000 0x11 0x000
-#define MX25_PAD_CSI_MCLK__SDHC2_DAT0		0x140 0x338 0x4e4 0x12 0x001
-#define MX25_PAD_CSI_MCLK__GPIO_1_8		0x140 0x338 0x000 0x15 0x000
+#define MX25_PAD_CSI_MCLK__CSI_MCLK		0x140 0x338 0x000 0x00 0x000
+#define MX25_PAD_CSI_MCLK__AUD6_TXD		0x140 0x338 0x000 0x01 0x000
+#define MX25_PAD_CSI_MCLK__SDHC2_DAT0		0x140 0x338 0x4e4 0x02 0x001
+#define MX25_PAD_CSI_MCLK__GPIO_1_8		0x140 0x338 0x000 0x05 0x000
 
-#define MX25_PAD_CSI_VSYNC__CSI_VSYNC		0x144 0x33c 0x000 0x10 0x000
-#define MX25_PAD_CSI_VSYNC__AUD6_RXD		0x144 0x33c 0x000 0x11 0x000
-#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1		0x144 0x33c 0x4e8 0x12 0x001
-#define MX25_PAD_CSI_VSYNC__GPIO_1_9		0x144 0x33c 0x000 0x15 0x000
+#define MX25_PAD_CSI_VSYNC__CSI_VSYNC		0x144 0x33c 0x000 0x00 0x000
+#define MX25_PAD_CSI_VSYNC__AUD6_RXD		0x144 0x33c 0x000 0x01 0x000
+#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1		0x144 0x33c 0x4e8 0x02 0x001
+#define MX25_PAD_CSI_VSYNC__GPIO_1_9		0x144 0x33c 0x000 0x05 0x000
 
-#define MX25_PAD_CSI_HSYNC__CSI_HSYNC		0x148 0x340 0x000 0x10 0x000
-#define MX25_PAD_CSI_HSYNC__AUD6_TXC		0x148 0x340 0x000 0x11 0x000
-#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2		0x148 0x340 0x4ec 0x12 0x001
-#define MX25_PAD_CSI_HSYNC__GPIO_1_10		0x148 0x340 0x000 0x15 0x000
+#define MX25_PAD_CSI_HSYNC__CSI_HSYNC		0x148 0x340 0x000 0x00 0x000
+#define MX25_PAD_CSI_HSYNC__AUD6_TXC		0x148 0x340 0x000 0x01 0x000
+#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2		0x148 0x340 0x4ec 0x02 0x001
+#define MX25_PAD_CSI_HSYNC__GPIO_1_10		0x148 0x340 0x000 0x05 0x000
 
-#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK		0x14c 0x344 0x000 0x10 0x000
-#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS		0x14c 0x344 0x000 0x11 0x000
-#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3		0x14c 0x344 0x4f0 0x12 0x001
-#define MX25_PAD_CSI_PIXCLK__GPIO_1_11		0x14c 0x344 0x000 0x15 0x000
+#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK		0x14c 0x344 0x000 0x00 0x000
+#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS		0x14c 0x344 0x000 0x01 0x000
+#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3		0x14c 0x344 0x4f0 0x02 0x001
+#define MX25_PAD_CSI_PIXCLK__GPIO_1_11		0x14c 0x344 0x000 0x05 0x000
 
-#define MX25_PAD_I2C1_CLK__I2C1_CLK		0x150 0x348 0x000 0x10 0x000
-#define MX25_PAD_I2C1_CLK__GPIO_1_12		0x150 0x348 0x000 0x15 0x000
+#define MX25_PAD_I2C1_CLK__I2C1_CLK		0x150 0x348 0x000 0x00 0x000
+#define MX25_PAD_I2C1_CLK__GPIO_1_12		0x150 0x348 0x000 0x05 0x000
 
-#define MX25_PAD_I2C1_DAT__I2C1_DAT		0x154 0x34c 0x000 0x10 0x000
-#define MX25_PAD_I2C1_DAT__GPIO_1_13		0x154 0x34c 0x000 0x15 0x000
+#define MX25_PAD_I2C1_DAT__I2C1_DAT		0x154 0x34c 0x000 0x00 0x000
+#define MX25_PAD_I2C1_DAT__GPIO_1_13		0x154 0x34c 0x000 0x05 0x000
 
-#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI		0x158 0x350 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_MOSI__UART3_RXD		0x158 0x350 0x568 0x12 0x000
-#define MX25_PAD_CSPI1_MOSI__GPIO_1_14		0x158 0x350 0x000 0x15 0x000
+#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI		0x158 0x350 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_MOSI__UART3_RXD		0x158 0x350 0x568 0x02 0x000
+#define MX25_PAD_CSPI1_MOSI__GPIO_1_14		0x158 0x350 0x000 0x05 0x000
 
-#define MX25_PAD_CSPI1_MISO__CSPI1_MISO		0x15c 0x354 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_MISO__UART3_TXD		0x15c 0x354 0x000 0x12 0x000
-#define MX25_PAD_CSPI1_MISO__GPIO_1_15		0x15c 0x354 0x000 0x15 0x000
+#define MX25_PAD_CSPI1_MISO__CSPI1_MISO		0x15c 0x354 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_MISO__UART3_TXD		0x15c 0x354 0x000 0x02 0x000
+#define MX25_PAD_CSPI1_MISO__GPIO_1_15		0x15c 0x354 0x000 0x05 0x000
 
-#define MX25_PAD_CSPI1_SS0__CSPI1_SS0		0x160 0x358 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_SS0__PWM2_PWMO		0x160 0x358 0x000 0x12 0x000
-#define MX25_PAD_CSPI1_SS0__GPIO_1_16		0x160 0x358 0x000 0x15 0x000
+#define MX25_PAD_CSPI1_SS0__CSPI1_SS0		0x160 0x358 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_SS0__PWM2_PWMO		0x160 0x358 0x000 0x02 0x000
+#define MX25_PAD_CSPI1_SS0__GPIO_1_16		0x160 0x358 0x000 0x05 0x000
 
 #define MX25_PAD_CSPI1_SS1__CSPI1_SS1		0x164 0x35c 0x000 0x00 0x000
 #define MX25_PAD_CSPI1_SS1__I2C3_DAT		0x164 0x35C 0x528 0x01 0x001
 #define MX25_PAD_CSPI1_SS1__UART3_RTS		0x164 0x35c 0x000 0x02 0x000
 #define MX25_PAD_CSPI1_SS1__GPIO_1_17		0x164 0x35c 0x000 0x05 0x000
 
-#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK		0x168 0x360 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_SCLK__UART3_CTS		0x168 0x360 0x000 0x12 0x000
-#define MX25_PAD_CSPI1_SCLK__GPIO_1_18		0x168 0x360 0x000 0x15 0x000
+#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK		0x168 0x360 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_SCLK__UART3_CTS		0x168 0x360 0x000 0x02 0x000
+#define MX25_PAD_CSPI1_SCLK__GPIO_1_18		0x168 0x360 0x000 0x05 0x000
 
-#define MX25_PAD_CSPI1_RDY__CSPI1_RDY		0x16c 0x364 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_RDY__GPIO_2_22		0x16c 0x364 0x000 0x15 0x000
+#define MX25_PAD_CSPI1_RDY__CSPI1_RDY		0x16c 0x364 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_RDY__GPIO_2_22		0x16c 0x364 0x000 0x05 0x000
 
 #define MX25_PAD_UART1_RXD__UART1_RXD		0x170 0x368 0x000 0x00 0x000
 #define MX25_PAD_UART1_RXD__UART2_DTR		0x170 0x368 0x000 0x03 0x000
@@ -406,46 +406,55 @@
 #define MX25_PAD_UART1_CTS__UART2_RI		0x17c 0x374 0x000 0x03 0x001
 #define MX25_PAD_UART1_CTS__GPIO_4_25		0x17c 0x374 0x000 0x05 0x000
 
-#define MX25_PAD_UART2_RXD__UART2_RXD		0x180 0x378 0x000 0x10 0x000
-#define MX25_PAD_UART2_RXD__GPIO_4_26		0x180 0x378 0x000 0x15 0x000
+#define MX25_PAD_UART2_RXD__UART2_RXD		0x180 0x378 0x000 0x00 0x000
+#define MX25_PAD_UART2_RXD__GPIO_4_26		0x180 0x378 0x000 0x05 0x000
 
-#define MX25_PAD_UART2_TXD__UART2_TXD		0x184 0x37c 0x000 0x10 0x000
-#define MX25_PAD_UART2_TXD__GPIO_4_27		0x184 0x37c 0x000 0x15 0x000
+#define MX25_PAD_UART2_TXD__UART2_TXD		0x184 0x37c 0x000 0x00 0x000
+#define MX25_PAD_UART2_TXD__GPIO_4_27		0x184 0x37c 0x000 0x05 0x000
 
 #define MX25_PAD_UART2_RTS__UART2_RTS		0x188 0x380 0x000 0x00 0x000
 #define MX25_PAD_UART2_RTS__FEC_COL		0x188 0x380 0x504 0x02 0x002
 #define MX25_PAD_UART2_RTS__CC1			0x188 0x380 0x000 0x03 0x000
 #define MX25_PAD_UART2_RTS__GPIO_4_28		0x188 0x380 0x000 0x05 0x000
 
-#define MX25_PAD_UART2_CTS__UART2_CTS		0x18c 0x384 0x000 0x10 0x000
-#define MX25_PAD_UART2_CTS__FEC_RX_ERR		0x18c 0x384 0x518 0x12 0x002
-#define MX25_PAD_UART2_CTS__GPIO_4_29		0x18c 0x384 0x000 0x15 0x000
+#define MX25_PAD_UART2_CTS__UART2_CTS		0x18c 0x384 0x000 0x00 0x000
+#define MX25_PAD_UART2_CTS__FEC_RX_ERR		0x18c 0x384 0x518 0x02 0x002
+#define MX25_PAD_UART2_CTS__GPIO_4_29		0x18c 0x384 0x000 0x05 0x000
 
+/*
+ * Removing the SION bit from MX25_PAD_SD1_CMD__SD1_CMD breaks detecting an SD
+ * card. According to the i.MX25 reference manual (e.g. Figure 23-2 in IMX25RM
+ * Rev. 2 from 01/2011) this pin is bidirectional. So it seems to be a silicon
+ * bug that configuring the SD1_CMD function doesn't enable the input path for
+ * this pin.
+ * This might have side effects for other hardware units that are connected to
+ * that pin and use the respective function as input.
+ */
 #define MX25_PAD_SD1_CMD__SD1_CMD		0x190 0x388 0x000 0x10 0x000
-#define MX25_PAD_SD1_CMD__CSPI2_MOSI		0x190 0x388 0x4a0 0x11 0x001
-#define MX25_PAD_SD1_CMD__FEC_RDATA2		0x190 0x388 0x50c 0x12 0x002
-#define MX25_PAD_SD1_CMD__GPIO_2_23		0x190 0x388 0x000 0x15 0x000
+#define MX25_PAD_SD1_CMD__CSPI2_MOSI		0x190 0x388 0x4a0 0x01 0x001
+#define MX25_PAD_SD1_CMD__FEC_RDATA2		0x190 0x388 0x50c 0x02 0x002
+#define MX25_PAD_SD1_CMD__GPIO_2_23		0x190 0x388 0x000 0x05 0x000
 
-#define MX25_PAD_SD1_CLK__SD1_CLK		0x194 0x38c 0x000 0x10 0x000
-#define MX25_PAD_SD1_CLK__CSPI2_MISO		0x194 0x38c 0x49c 0x11 0x001
-#define MX25_PAD_SD1_CLK__FEC_RDATA3		0x194 0x38c 0x510 0x12 0x002
-#define MX25_PAD_SD1_CLK__GPIO_2_24		0x194 0x38c 0x000 0x15 0x000
+#define MX25_PAD_SD1_CLK__SD1_CLK		0x194 0x38c 0x000 0x00 0x000
+#define MX25_PAD_SD1_CLK__CSPI2_MISO		0x194 0x38c 0x49c 0x01 0x001
+#define MX25_PAD_SD1_CLK__FEC_RDATA3		0x194 0x38c 0x510 0x02 0x002
+#define MX25_PAD_SD1_CLK__GPIO_2_24		0x194 0x38c 0x000 0x05 0x000
 
-#define MX25_PAD_SD1_DATA0__SD1_DATA0		0x198 0x390 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA0__CSPI2_SCLK		0x198 0x390 0x494 0x11 0x001
-#define MX25_PAD_SD1_DATA0__GPIO_2_25		0x198 0x390 0x000 0x15 0x000
+#define MX25_PAD_SD1_DATA0__SD1_DATA0		0x198 0x390 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA0__CSPI2_SCLK		0x198 0x390 0x494 0x01 0x001
+#define MX25_PAD_SD1_DATA0__GPIO_2_25		0x198 0x390 0x000 0x05 0x000
 
-#define MX25_PAD_SD1_DATA1__SD1_DATA1		0x19c 0x394 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA1__AUD7_RXD		0x19c 0x394 0x478 0x13 0x000
-#define MX25_PAD_SD1_DATA1__GPIO_2_26		0x19c 0x394 0x000 0x15 0x000
+#define MX25_PAD_SD1_DATA1__SD1_DATA1		0x19c 0x394 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA1__AUD7_RXD		0x19c 0x394 0x478 0x03 0x000
+#define MX25_PAD_SD1_DATA1__GPIO_2_26		0x19c 0x394 0x000 0x05 0x000
 
-#define MX25_PAD_SD1_DATA2__SD1_DATA2		0x1a0 0x398 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA2__FEC_RX_CLK		0x1a0 0x398 0x514 0x12 0x002
-#define MX25_PAD_SD1_DATA2__GPIO_2_27		0x1a0 0x398 0x000 0x15 0x000
+#define MX25_PAD_SD1_DATA2__SD1_DATA2		0x1a0 0x398 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK		0x1a0 0x398 0x514 0x02 0x002
+#define MX25_PAD_SD1_DATA2__GPIO_2_27		0x1a0 0x398 0x000 0x05 0x000
 
-#define MX25_PAD_SD1_DATA3__SD1_DATA3		0x1a4 0x39c 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA3__FEC_CRS		0x1a4 0x39c 0x508 0x12 0x002
-#define MX25_PAD_SD1_DATA3__GPIO_2_28		0x1a4 0x39c 0x000 0x15 0x000
+#define MX25_PAD_SD1_DATA3__SD1_DATA3		0x1a4 0x39c 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA3__FEC_CRS		0x1a4 0x39c 0x508 0x02 0x002
+#define MX25_PAD_SD1_DATA3__GPIO_2_28		0x1a4 0x39c 0x000 0x05 0x000
 
 #define MX25_PAD_KPP_ROW0__KPP_ROW0		0x1a8 0x3a0 0x000 0x00 0x000
 #define MX25_PAD_KPP_ROW0__UART3_RXD		0x1a8 0x3a0 0x568 0x01 0x001
@@ -469,123 +478,123 @@
 #define MX25_PAD_KPP_ROW3__UART1_RI		0x1b4 0x3ac 0x000 0x04 0x000
 #define MX25_PAD_KPP_ROW3__GPIO_3_0		0x1b4 0x3ac 0x000 0x05 0x000
 
-#define MX25_PAD_KPP_COL0__KPP_COL0		0x1b8 0x3b0 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL0__UART4_RXD		0x1b8 0x3b0 0x570 0x11 0x001
-#define MX25_PAD_KPP_COL0__AUD5_TXD		0x1b8 0x3b0 0x000 0x12 0x000
-#define MX25_PAD_KPP_COL0__GPIO_3_1		0x1b8 0x3b0 0x000 0x15 0x000
+#define MX25_PAD_KPP_COL0__KPP_COL0		0x1b8 0x3b0 0x000 0x00 0x000
+#define MX25_PAD_KPP_COL0__UART4_RXD		0x1b8 0x3b0 0x570 0x01 0x001
+#define MX25_PAD_KPP_COL0__AUD5_TXD		0x1b8 0x3b0 0x000 0x02 0x000
+#define MX25_PAD_KPP_COL0__GPIO_3_1		0x1b8 0x3b0 0x000 0x05 0x000
 
-#define MX25_PAD_KPP_COL1__KPP_COL1		0x1bc 0x3b4 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL1__UART4_TXD		0x1bc 0x3b4 0x000 0x11 0x000
-#define MX25_PAD_KPP_COL1__AUD5_RXD		0x1bc 0x3b4 0x000 0x12 0x000
-#define MX25_PAD_KPP_COL1__GPIO_3_2		0x1bc 0x3b4 0x000 0x15 0x000
+#define MX25_PAD_KPP_COL1__KPP_COL1		0x1bc 0x3b4 0x000 0x00 0x000
+#define MX25_PAD_KPP_COL1__UART4_TXD		0x1bc 0x3b4 0x000 0x01 0x000
+#define MX25_PAD_KPP_COL1__AUD5_RXD		0x1bc 0x3b4 0x000 0x02 0x000
+#define MX25_PAD_KPP_COL1__GPIO_3_2		0x1bc 0x3b4 0x000 0x05 0x000
 
 #define MX25_PAD_KPP_COL2__KPP_COL2		0x1c0 0x3b8 0x000 0x00 0x000
 #define MX25_PAD_KPP_COL2__UART4_RTS		0x1c0 0x3b8 0x56c 0x01 0x001
 #define MX25_PAD_KPP_COL2__AUD5_TXC		0x1c0 0x3b8 0x000 0x02 0x000
 #define MX25_PAD_KPP_COL2__GPIO_3_3		0x1c0 0x3b8 0x000 0x05 0x000
 
-#define MX25_PAD_KPP_COL3__KPP_COL3		0x1c4 0x3bc 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL3__UART4_CTS		0x1c4 0x3bc 0x000 0x11 0x000
-#define MX25_PAD_KPP_COL3__AUD5_TXFS		0x1c4 0x3bc 0x000 0x12 0x000
-#define MX25_PAD_KPP_COL3__GPIO_3_4		0x1c4 0x3bc 0x000 0x15 0x000
+#define MX25_PAD_KPP_COL3__KPP_COL3		0x1c4 0x3bc 0x000 0x00 0x000
+#define MX25_PAD_KPP_COL3__UART4_CTS		0x1c4 0x3bc 0x000 0x01 0x000
+#define MX25_PAD_KPP_COL3__AUD5_TXFS		0x1c4 0x3bc 0x000 0x02 0x000
+#define MX25_PAD_KPP_COL3__GPIO_3_4		0x1c4 0x3bc 0x000 0x05 0x000
 
-#define MX25_PAD_FEC_MDC__FEC_MDC		0x1c8 0x3c0 0x000 0x10 0x000
-#define MX25_PAD_FEC_MDC__AUD4_TXD		0x1c8 0x3c0 0x464 0x12 0x001
-#define MX25_PAD_FEC_MDC__GPIO_3_5		0x1c8 0x3c0 0x000 0x15 0x000
+#define MX25_PAD_FEC_MDC__FEC_MDC		0x1c8 0x3c0 0x000 0x00 0x000
+#define MX25_PAD_FEC_MDC__AUD4_TXD		0x1c8 0x3c0 0x464 0x02 0x001
+#define MX25_PAD_FEC_MDC__GPIO_3_5		0x1c8 0x3c0 0x000 0x05 0x000
 
-#define MX25_PAD_FEC_MDIO__FEC_MDIO		0x1cc 0x3c4 0x000 0x10 0x000
-#define MX25_PAD_FEC_MDIO__AUD4_RXD		0x1cc 0x3c4 0x460 0x12 0x001
-#define MX25_PAD_FEC_MDIO__GPIO_3_6		0x1cc 0x3c4 0x000 0x15 0x000
+#define MX25_PAD_FEC_MDIO__FEC_MDIO		0x1cc 0x3c4 0x000 0x00 0x000
+#define MX25_PAD_FEC_MDIO__AUD4_RXD		0x1cc 0x3c4 0x460 0x02 0x001
+#define MX25_PAD_FEC_MDIO__GPIO_3_6		0x1cc 0x3c4 0x000 0x05 0x000
 
-#define MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x1d0 0x3c8 0x000 0x10 0x000
-#define MX25_PAD_FEC_TDATA0__GPIO_3_7		0x1d0 0x3c8 0x000 0x15 0x000
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x1d0 0x3c8 0x000 0x00 0x000
+#define MX25_PAD_FEC_TDATA0__GPIO_3_7		0x1d0 0x3c8 0x000 0x05 0x000
 
-#define MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x1d4 0x3cc 0x000 0x10 0x000
-#define MX25_PAD_FEC_TDATA1__AUD4_TXFS		0x1d4 0x3cc 0x474 0x12 0x001
-#define MX25_PAD_FEC_TDATA1__GPIO_3_8		0x1d4 0x3cc 0x000 0x15 0x000
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x1d4 0x3cc 0x000 0x00 0x000
+#define MX25_PAD_FEC_TDATA1__AUD4_TXFS		0x1d4 0x3cc 0x474 0x02 0x001
+#define MX25_PAD_FEC_TDATA1__GPIO_3_8		0x1d4 0x3cc 0x000 0x05 0x000
 
-#define MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x1d8 0x3d0 0x000 0x10 0x000
-#define MX25_PAD_FEC_TX_EN__GPIO_3_9		0x1d8 0x3d0 0x000 0x15 0x000
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x1d8 0x3d0 0x000 0x00 0x000
+#define MX25_PAD_FEC_TX_EN__GPIO_3_9		0x1d8 0x3d0 0x000 0x05 0x000
 
-#define MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x1dc 0x3d4 0x000 0x10 0x000
-#define MX25_PAD_FEC_RDATA0__GPIO_3_10		0x1dc 0x3d4 0x000 0x15 0x000
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x1dc 0x3d4 0x000 0x00 0x000
+#define MX25_PAD_FEC_RDATA0__GPIO_3_10		0x1dc 0x3d4 0x000 0x05 0x000
 
-#define MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x1e0 0x3d8 0x000 0x10 0x000
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x1e0 0x3d8 0x000 0x00 0x000
 /*
  * According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
  * 01/2011) this is CAN1_TX but that's wrong.
  */
-#define MX25_PAD_FEC_RDATA1__CAN2_TX		0x1e0 0x3d8 0x000 0x14 0x000
-#define MX25_PAD_FEC_RDATA1__GPIO_3_11		0x1e0 0x3d8 0x000 0x15 0x000
+#define MX25_PAD_FEC_RDATA1__CAN2_TX		0x1e0 0x3d8 0x000 0x04 0x000
+#define MX25_PAD_FEC_RDATA1__GPIO_3_11		0x1e0 0x3d8 0x000 0x05 0x000
 
-#define MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x1e4 0x3dc 0x000 0x10 0x000
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x1e4 0x3dc 0x000 0x00 0x000
 /*
  * According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
  * 01/2011) this is CAN1_RX but that's wrong.
  */
-#define MX25_PAD_FEC_RX_DV__CAN2_RX		0x1e4 0x3dc 0x484 0x14 0x000
-#define MX25_PAD_FEC_RX_DV__GPIO_3_12		0x1e4 0x3dc 0x000 0x15 0x000
+#define MX25_PAD_FEC_RX_DV__CAN2_RX		0x1e4 0x3dc 0x484 0x04 0x000
+#define MX25_PAD_FEC_RX_DV__GPIO_3_12		0x1e4 0x3dc 0x000 0x05 0x000
 
-#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1e8 0x3e0 0x000 0x10 0x000
-#define MX25_PAD_FEC_TX_CLK__GPIO_3_13		0x1e8 0x3e0 0x000 0x15 0x000
+#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1e8 0x3e0 0x000 0x00 0x000
+#define MX25_PAD_FEC_TX_CLK__GPIO_3_13		0x1e8 0x3e0 0x000 0x05 0x000
 
-#define MX25_PAD_RTCK__RTCK			0x1ec 0x3e4 0x000 0x10 0x000
-#define MX25_PAD_RTCK__OWIRE			0x1ec 0x3e4 0x000 0x11 0x000
-#define MX25_PAD_RTCK__GPIO_3_14		0x1ec 0x3e4 0x000 0x15 0x000
+#define MX25_PAD_RTCK__RTCK			0x1ec 0x3e4 0x000 0x00 0x000
+#define MX25_PAD_RTCK__OWIRE			0x1ec 0x3e4 0x000 0x01 0x000
+#define MX25_PAD_RTCK__GPIO_3_14		0x1ec 0x3e4 0x000 0x05 0x000
 
-#define MX25_PAD_DE_B__DE_B			0x1f0 0x3ec 0x000 0x10 0x000
-#define MX25_PAD_DE_B__GPIO_2_20		0x1f0 0x3ec 0x000 0x15 0x000
+#define MX25_PAD_DE_B__DE_B			0x1f0 0x3ec 0x000 0x00 0x000
+#define MX25_PAD_DE_B__GPIO_2_20		0x1f0 0x3ec 0x000 0x05 0x000
 
-#define MX25_PAD_GPIO_A__GPIO_A			0x1f4 0x3f0 0x000 0x10 0x000
-#define MX25_PAD_GPIO_A__CAN1_TX		0x1f4 0x3f0 0x000 0x16 0x000
-#define MX25_PAD_GPIO_A__USBOTG_PWR		0x1f4 0x3f0 0x000 0x12 0x000
+#define MX25_PAD_GPIO_A__GPIO_A			0x1f4 0x3f0 0x000 0x00 0x000
+#define MX25_PAD_GPIO_A__CAN1_TX		0x1f4 0x3f0 0x000 0x06 0x000
+#define MX25_PAD_GPIO_A__USBOTG_PWR		0x1f4 0x3f0 0x000 0x02 0x000
 
-#define MX25_PAD_GPIO_B__GPIO_B			0x1f8 0x3f4 0x000 0x10 0x000
-#define MX25_PAD_GPIO_B__USBOTG_OC		0x1f8 0x3f4 0x57c 0x12 0x001
-#define MX25_PAD_GPIO_B__CAN1_RX		0x1f8 0x3f4 0x480 0x16 0x001
+#define MX25_PAD_GPIO_B__GPIO_B			0x1f8 0x3f4 0x000 0x00 0x000
+#define MX25_PAD_GPIO_B__USBOTG_OC		0x1f8 0x3f4 0x57c 0x02 0x001
+#define MX25_PAD_GPIO_B__CAN1_RX		0x1f8 0x3f4 0x480 0x06 0x001
 
-#define MX25_PAD_GPIO_C__GPIO_C			0x1fc 0x3f8 0x000 0x10 0x000
-#define MX25_PAD_GPIO_C__PWM4_PWMO		0x1fc 0x3f8 0x000 0x11 0x000
-#define MX25_PAD_GPIO_C__I2C2_SCL		0x1fc 0x3f8 0x51c 0x12 0x001
-#define MX25_PAD_GPIO_C__KPP_COL4		0x1fc 0x3f8 0x52c 0x13 0x001
-#define MX25_PAD_GPIO_C__CAN2_TX		0x1fc 0x3f8 0x000 0x16 0x000
+#define MX25_PAD_GPIO_C__GPIO_C			0x1fc 0x3f8 0x000 0x00 0x000
+#define MX25_PAD_GPIO_C__PWM4_PWMO		0x1fc 0x3f8 0x000 0x01 0x000
+#define MX25_PAD_GPIO_C__I2C2_SCL		0x1fc 0x3f8 0x51c 0x02 0x001
+#define MX25_PAD_GPIO_C__KPP_COL4		0x1fc 0x3f8 0x52c 0x03 0x001
+#define MX25_PAD_GPIO_C__CAN2_TX		0x1fc 0x3f8 0x000 0x06 0x000
 
-#define MX25_PAD_GPIO_D__GPIO_D			0x200 0x3fc 0x000 0x10 0x000
-#define MX25_PAD_GPIO_D__I2C2_SDA		0x200 0x3fc 0x520 0x12 0x001
-#define MX25_PAD_GPIO_D__CAN2_RX		0x200 0x3fc 0x484 0x16 0x001
+#define MX25_PAD_GPIO_D__GPIO_D			0x200 0x3fc 0x000 0x00 0x000
+#define MX25_PAD_GPIO_D__I2C2_SDA		0x200 0x3fc 0x520 0x02 0x001
+#define MX25_PAD_GPIO_D__CAN2_RX		0x200 0x3fc 0x484 0x06 0x001
 
-#define MX25_PAD_GPIO_E__GPIO_E			0x204 0x400 0x000 0x10 0x000
-#define MX25_PAD_GPIO_E__I2C3_CLK		0x204 0x400 0x524 0x11 0x002
-#define MX25_PAD_GPIO_E__LD16			0x204 0x400 0x000 0x12 0x000
-#define MX25_PAD_GPIO_E__AUD7_TXD		0x204 0x400 0x000 0x14 0x000
-#define MX25_PAD_GPIO_E__UART4_RXD		0x204 0x400 0x570 0x16 0x002
+#define MX25_PAD_GPIO_E__GPIO_E			0x204 0x400 0x000 0x00 0x000
+#define MX25_PAD_GPIO_E__I2C3_CLK		0x204 0x400 0x524 0x01 0x002
+#define MX25_PAD_GPIO_E__LD16			0x204 0x400 0x000 0x02 0x000
+#define MX25_PAD_GPIO_E__AUD7_TXD		0x204 0x400 0x000 0x04 0x000
+#define MX25_PAD_GPIO_E__UART4_RXD		0x204 0x400 0x570 0x06 0x002
 
-#define MX25_PAD_GPIO_F__GPIO_F			0x208 0x404 0x000 0x10 0x000
-#define MX25_PAD_GPIO_F__LD17			0x208 0x404 0x000 0x12 0x000
-#define MX25_PAD_GPIO_F__AUD7_TXC		0x208 0x404 0x000 0x14 0x000
-#define MX25_PAD_GPIO_F__UART4_TXD		0x208 0x404 0x000 0x16 0x000
+#define MX25_PAD_GPIO_F__GPIO_F			0x208 0x404 0x000 0x00 0x000
+#define MX25_PAD_GPIO_F__LD17			0x208 0x404 0x000 0x02 0x000
+#define MX25_PAD_GPIO_F__AUD7_TXC		0x208 0x404 0x000 0x04 0x000
+#define MX25_PAD_GPIO_F__UART4_TXD		0x208 0x404 0x000 0x06 0x000
 
-#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK		0x20c 0x000 0x000 0x10 0x000
-#define MX25_PAD_EXT_ARMCLK__GPIO_3_15		0x20c 0x000 0x000 0x15 0x000
+#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK		0x20c 0x000 0x000 0x00 0x000
+#define MX25_PAD_EXT_ARMCLK__GPIO_3_15		0x20c 0x000 0x000 0x05 0x000
 
-#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK	0x210 0x000 0x000 0x10 0x000
-#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16		0x210 0x000 0x000 0x15 0x000
+#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK	0x210 0x000 0x000 0x00 0x000
+#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16		0x210 0x000 0x000 0x05 0x000
 
 #define MX25_PAD_VSTBY_REQ__VSTBY_REQ		0x214 0x408 0x000 0x00 0x000
 #define MX25_PAD_VSTBY_REQ__AUD7_TXFS		0x214 0x408 0x000 0x04 0x000
 #define MX25_PAD_VSTBY_REQ__GPIO_3_17		0x214 0x408 0x000 0x05 0x000
 #define MX25_PAD_VSTBY_REQ__UART4_RTS		0x214 0x408 0x56c 0x06 0x002
 
-#define MX25_PAD_VSTBY_ACK__VSTBY_ACK		0x218 0x40c 0x000 0x10 0x000
-#define MX25_PAD_VSTBY_ACK__GPIO_3_18		0x218 0x40c 0x000 0x15 0x000
+#define MX25_PAD_VSTBY_ACK__VSTBY_ACK		0x218 0x40c 0x000 0x00 0x000
+#define MX25_PAD_VSTBY_ACK__GPIO_3_18		0x218 0x40c 0x000 0x05 0x000
 
-#define MX25_PAD_POWER_FAIL__POWER_FAIL		0x21c 0x410 0x000 0x10 0x000
-#define MX25_PAD_POWER_FAIL__AUD7_RXD		0x21c 0x410 0x478 0x14 0x001
-#define MX25_PAD_POWER_FAIL__GPIO_3_19		0x21c 0x410 0x000 0x15 0x000
-#define MX25_PAD_POWER_FAIL__UART4_CTS		0x21c 0x410 0x000 0x16 0x000
+#define MX25_PAD_POWER_FAIL__POWER_FAIL		0x21c 0x410 0x000 0x00 0x000
+#define MX25_PAD_POWER_FAIL__AUD7_RXD		0x21c 0x410 0x478 0x04 0x001
+#define MX25_PAD_POWER_FAIL__GPIO_3_19		0x21c 0x410 0x000 0x05 0x000
+#define MX25_PAD_POWER_FAIL__UART4_CTS		0x21c 0x410 0x000 0x06 0x000
 
-#define MX25_PAD_CLKO__CLKO			0x220 0x414 0x000 0x10 0x000
-#define MX25_PAD_CLKO__GPIO_2_21		0x220 0x414 0x000 0x15 0x000
+#define MX25_PAD_CLKO__CLKO			0x220 0x414 0x000 0x00 0x000
+#define MX25_PAD_CLKO__GPIO_2_21		0x220 0x414 0x000 0x05 0x000
 
 #define MX25_PAD_BOOT_MODE0__BOOT_MODE0		0x224 0x000 0x000 0x00 0x000
 #define MX25_PAD_BOOT_MODE0__GPIO_4_30		0x224 0x000 0x000 0x05 0x000
diff --git a/src/arm/imx25.dtsi b/src/arm/imx25.dtsi
index af6af8741fe5..acd475659156 100644
--- a/src/arm/imx25.dtsi
+++ b/src/arm/imx25.dtsi
@@ -9,10 +9,20 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include "skeleton.dtsi"
 #include "imx25-pinfunc.h"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
+
 	aliases {
 		ethernet0 = &fec;
 		gpio0 = &gpio1;
diff --git a/src/arm/imx27-eukrea-cpuimx27.dtsi b/src/arm/imx27-eukrea-cpuimx27.dtsi
index e2242638ea0b..2cf896c505f9 100644
--- a/src/arm/imx27-eukrea-cpuimx27.dtsi
+++ b/src/arm/imx27-eukrea-cpuimx27.dtsi
@@ -77,7 +77,7 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/src/arm/imx27-eukrea-mbimxsd27-baseboard.dts b/src/arm/imx27-eukrea-mbimxsd27-baseboard.dts
index 2ab65fc4c1e1..27846ff9bb0d 100644
--- a/src/arm/imx27-eukrea-mbimxsd27-baseboard.dts
+++ b/src/arm/imx27-eukrea-mbimxsd27-baseboard.dts
@@ -140,21 +140,21 @@
 };
 
 &uart1 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
 &uart2 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
 };
 
 &uart3 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
diff --git a/src/arm/imx27-pdk.dts b/src/arm/imx27-pdk.dts
index 49450dbbcab8..d0ef496a1af8 100644
--- a/src/arm/imx27-pdk.dts
+++ b/src/arm/imx27-pdk.dts
@@ -106,7 +106,7 @@
 };
 
 &uart1 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
diff --git a/src/arm/imx27-phytec-phycard-s-rdk.dts b/src/arm/imx27-phytec-phycard-s-rdk.dts
index 7c869fe3c30b..bfd4946cf9fe 100644
--- a/src/arm/imx27-phytec-phycard-s-rdk.dts
+++ b/src/arm/imx27-phytec-phycard-s-rdk.dts
@@ -147,21 +147,21 @@
 };
 
 &uart1 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
 &uart2 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
 };
 
 &uart3 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
diff --git a/src/arm/imx27-phytec-phycore-rdk.dts b/src/arm/imx27-phytec-phycore-rdk.dts
index 538568b0de26..cf09e72aeb06 100644
--- a/src/arm/imx27-phytec-phycore-rdk.dts
+++ b/src/arm/imx27-phytec-phycore-rdk.dts
@@ -283,14 +283,14 @@
 };
 
 &uart1 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
 &uart2 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
diff --git a/src/arm/imx27.dtsi b/src/arm/imx27.dtsi
index f818ea483aeb..b397384248f4 100644
--- a/src/arm/imx27.dtsi
+++ b/src/arm/imx27.dtsi
@@ -9,7 +9,6 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include "skeleton.dtsi"
 #include "imx27-pinfunc.h"
 
 #include <dt-bindings/clock/imx27-clock.h>
@@ -18,6 +17,17 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
+
 	aliases {
 		ethernet0 = &fec;
 		gpio0 = &gpio1;
diff --git a/src/arm/imx28-apf28dev.dts b/src/arm/imx28-apf28dev.dts
index 1eaa131e2d18..c4fadbc1b400 100644
--- a/src/arm/imx28-apf28dev.dts
+++ b/src/arm/imx28-apf28dev.dts
@@ -140,7 +140,7 @@
 			auart0: serial@8006a000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&auart0_pins_a>;
-				fsl,uart-has-rtscts;
+				uart-has-rtscts;
 				status = "okay";
 			};
 
diff --git a/src/arm/imx28-cfa10049.dts b/src/arm/imx28-cfa10049.dts
index ef944b6d4f01..a9c347e48bcf 100644
--- a/src/arm/imx28-cfa10049.dts
+++ b/src/arm/imx28-cfa10049.dts
@@ -426,7 +426,7 @@
 
 	};
 
-	onewire@0 {
+	onewire {
 		compatible = "w1-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&w1_gpio_pins>;
diff --git a/src/arm/imx28-eukrea-mbmx28lc.dtsi b/src/arm/imx28-eukrea-mbmx28lc.dtsi
index 88594747f454..581e85f4fd4c 100644
--- a/src/arm/imx28-eukrea-mbmx28lc.dtsi
+++ b/src/arm/imx28-eukrea-mbmx28lc.dtsi
@@ -84,6 +84,7 @@
 
 		reg_3p3v: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "3P3V";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
@@ -92,6 +93,7 @@
 
 		reg_lcd_3v3: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&reg_lcd_3v3_pins_mbmx28lc>;
 			regulator-name = "lcd-3v3";
@@ -103,6 +105,7 @@
 
 		reg_usb0_vbus: regulator@2 {
 			compatible = "regulator-fixed";
+			reg = <2>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&reg_usb0_vbus_pins_mbmx28lc>;
 			regulator-name = "usb0_vbus";
@@ -114,6 +117,7 @@
 
 		reg_usb1_vbus: regulator@3 {
 			compatible = "regulator-fixed";
+			reg = <3>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&reg_usb1_vbus_pins_mbmx28lc>;
 			regulator-name = "usb1_vbus";
diff --git a/src/arm/imx28-evk.dts b/src/arm/imx28-evk.dts
index e3ef94ac159f..a5ba669b4eaa 100644
--- a/src/arm/imx28-evk.dts
+++ b/src/arm/imx28-evk.dts
@@ -224,7 +224,7 @@
 			auart0: serial@8006a000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&auart0_pins_a>;
-				fsl,uart-has-rtscts;
+				uart-has-rtscts;
 				status = "okay";
 			};
 
diff --git a/src/arm/imx28-m28.dtsi b/src/arm/imx28-m28.dtsi
index 6cebaa6b8833..a69856e41ba4 100644
--- a/src/arm/imx28-m28.dtsi
+++ b/src/arm/imx28-m28.dtsi
@@ -12,8 +12,8 @@
 #include "imx28.dtsi"
 
 / {
-	model = "DENX M28";
-	compatible = "denx,m28", "fsl,imx28";
+	model = "Aries/DENX M28";
+	compatible = "aries,m28", "denx,m28", "fsl,imx28";
 
 	memory {
 		reg = <0x40000000 0x08000000>;
@@ -37,7 +37,7 @@
 				status = "okay";
 
 				rtc: rtc@68 {
-					compatible = "stm,m41t62";
+					compatible = "st,m41t62";
 					reg = <0x68>;
 				};
 			};
diff --git a/src/arm/imx28-m28evk.dts b/src/arm/imx28-m28evk.dts
index 8d04e57039bc..dbfb8aab505f 100644
--- a/src/arm/imx28-m28evk.dts
+++ b/src/arm/imx28-m28evk.dts
@@ -13,8 +13,8 @@
 #include "imx28-m28.dtsi"
 
 / {
-	model = "DENX M28EVK";
-	compatible = "denx,m28evk", "fsl,imx28";
+	model = "Aries/DENX M28EVK";
+	compatible = "aries,m28evk", "denx,m28evk", "fsl,imx28";
 
 	apb@80000000 {
 		apbh@80000000 {
diff --git a/src/arm/imx28-tx28.dts b/src/arm/imx28-tx28.dts
index fd20e99c777e..0ebbc83852d0 100644
--- a/src/arm/imx28-tx28.dts
+++ b/src/arm/imx28-tx28.dts
@@ -173,7 +173,7 @@
 		default-brightness-level = <50>;
 	};
 
-	matrix_keypad: matrix-keypad@0 {
+	matrix_keypad: matrix-keypad {
 		compatible = "gpio-matrix-keypad";
 		col-gpios = <
 			&gpio5 0 GPIO_ACTIVE_HIGH
diff --git a/src/arm/imx28.dtsi b/src/arm/imx28.dtsi
index 74aa151cdb45..d6a2190b60ef 100644
--- a/src/arm/imx28.dtsi
+++ b/src/arm/imx28.dtsi
@@ -10,11 +10,21 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
 #include "imx28-pinfunc.h"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	interrupt-parent = <&icoll>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &mac0;
@@ -165,6 +175,7 @@
 
 				gpio0: gpio@0 {
 					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <0>;
 					interrupts = <127>;
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -174,6 +185,7 @@
 
 				gpio1: gpio@1 {
 					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <1>;
 					interrupts = <126>;
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -183,6 +195,7 @@
 
 				gpio2: gpio@2 {
 					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <2>;
 					interrupts = <125>;
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -192,6 +205,7 @@
 
 				gpio3: gpio@3 {
 					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <3>;
 					interrupts = <124>;
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -201,6 +215,7 @@
 
 				gpio4: gpio@4 {
 					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <4>;
 					interrupts = <123>;
 					gpio-controller;
 					#gpio-cells = <2>;
diff --git a/src/arm/imx31-bug.dts b/src/arm/imx31-bug.dts
index 2424abfc9c7b..ae6cebbed84b 100644
--- a/src/arm/imx31-bug.dts
+++ b/src/arm/imx31-bug.dts
@@ -22,6 +22,6 @@
 };
 
 &uart5 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
diff --git a/src/arm/imx31.dtsi b/src/arm/imx31.dtsi
index 1ce7ae94e7ad..23b0d2cf9acd 100644
--- a/src/arm/imx31.dtsi
+++ b/src/arm/imx31.dtsi
@@ -9,9 +9,18 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
+
 	aliases {
 		serial0 = &uart1;
 		serial1 = &uart2;
@@ -30,11 +39,11 @@
 		};
 	};
 
-	avic: avic-interrupt-controller@60000000 {
+	avic: interrupt-controller@68000000 {
 		compatible = "fsl,imx31-avic", "fsl,avic";
 		interrupt-controller;
 		#interrupt-cells = <1>;
-		reg = <0x60000000 0x100000>;
+		reg = <0x68000000 0x100000>;
 	};
 
 	soc {
@@ -118,13 +127,6 @@
 				interrupts = <19>;
 				clocks = <&clks 25>;
 			};
-
-			clks: ccm@53f80000{
-				compatible = "fsl,imx31-ccm";
-				reg = <0x53f80000 0x4000>;
-				interrupts = <0 31 0x04 0 53 0x04>;
-				#clock-cells = <1>;
-			};
 		};
 
 		aips@53f00000 { /* AIPS2 */
@@ -134,6 +136,13 @@
 			reg = <0x53f00000 0x100000>;
 			ranges;
 
+			clks: ccm@53f80000{
+				compatible = "fsl,imx31-ccm";
+				reg = <0x53f80000 0x4000>;
+				interrupts = <31>, <53>;
+				#clock-cells = <1>;
+			};
+
 			gpt: timer@53f90000 {
 				compatible = "fsl,imx31-gpt";
 				reg = <0x53f90000 0x4000>;
diff --git a/src/arm/imx35-eukrea-mbimxsd35-baseboard.dts b/src/arm/imx35-eukrea-mbimxsd35-baseboard.dts
index 4727bbb804e1..e9357131b026 100644
--- a/src/arm/imx35-eukrea-mbimxsd35-baseboard.dts
+++ b/src/arm/imx35-eukrea-mbimxsd35-baseboard.dts
@@ -139,14 +139,14 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/src/arm/imx35-pdk.dts b/src/arm/imx35-pdk.dts
index 8d715523708f..9bb628f22502 100644
--- a/src/arm/imx35-pdk.dts
+++ b/src/arm/imx35-pdk.dts
@@ -63,6 +63,6 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
diff --git a/src/arm/imx35.dtsi b/src/arm/imx35.dtsi
index 490b7b44f1e7..d0496c65cea2 100644
--- a/src/arm/imx35.dtsi
+++ b/src/arm/imx35.dtsi
@@ -8,10 +8,20 @@
  * Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
 #include "imx35-pinfunc.h"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
+
 	aliases {
 		ethernet0 = &fec;
 		gpio0 = &gpio1;
@@ -309,6 +319,13 @@
 				status = "disabled";
 			};
 
+			iim@53ff0000 {
+				compatible = "fsl,imx35-iim";
+				reg = <0x53ff0000 0x4000>;
+				interrupts = <19>;
+				clocks = <&clks 80>;
+			};
+
 			usbotg: usb@53ff4000 {
 				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
 				reg = <0x53ff4000 0x0200>;
diff --git a/src/arm/imx50.dtsi b/src/arm/imx50.dtsi
index e2457138311f..ceae909e2201 100644
--- a/src/arm/imx50.dtsi
+++ b/src/arm/imx50.dtsi
@@ -11,11 +11,21 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include "skeleton.dtsi"
 #include "imx50-pinfunc.h"
 #include <dt-bindings/clock/imx5-clock.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
+
 	aliases {
 		ethernet0 = &fec;
 		gpio0 = &gpio1;
@@ -103,8 +113,8 @@
 					reg = <0x50004000 0x4000>;
 					interrupts = <1>;
 					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC1_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -115,8 +125,8 @@
 					reg = <0x50008000 0x4000>;
 					interrupts = <2>;
 					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC2_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -127,7 +137,7 @@
 					reg = <0x5000c000 0x4000>;
 					interrupts = <33>;
 					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
-					         <&clks IMX5_CLK_UART3_PER_GATE>;
+						 <&clks IMX5_CLK_UART3_PER_GATE>;
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
@@ -139,7 +149,7 @@
 					reg = <0x50010000 0x4000>;
 					interrupts = <36>;
 					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
-					         <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+						 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
@@ -164,8 +174,8 @@
 					reg = <0x50020000 0x4000>;
 					interrupts = <3>;
 					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC3_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -176,8 +186,8 @@
 					reg = <0x50024000 0x4000>;
 					interrupts = <4>;
 					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC4_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -227,6 +237,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 151 28>;
 			};
 
 			gpio2: gpio@53f88000 {
@@ -237,6 +248,10 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 75 8>, <&iomuxc 8 100 8>,
+					      <&iomuxc 16 83 1>, <&iomuxc 17 85 1>,
+					      <&iomuxc 18 87 1>, <&iomuxc 19 84 1>,
+					      <&iomuxc 20 88 1>, <&iomuxc 21 86 1>;
 			};
 
 			gpio3: gpio@53f8c000 {
@@ -247,6 +262,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 108 32>;
 			};
 
 			gpio4: gpio@53f90000 {
@@ -257,6 +273,8 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0   8  8>, <&iomuxc 8 45 12>,
+					      <&iomuxc 20 140 11>;
 			};
 
 			wdog1: wdog@53f98000 {
@@ -271,7 +289,7 @@
 				reg = <0x53fa0000 0x4000>;
 				interrupts = <39>;
 				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
-				         <&clks IMX5_CLK_GPT_HF_GATE>;
+					 <&clks IMX5_CLK_GPT_HF_GATE>;
 				clock-names = "ipg", "per";
 			};
 
@@ -290,7 +308,7 @@
 				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
 				reg = <0x53fb4000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
-				         <&clks IMX5_CLK_PWM1_HF_GATE>;
+					 <&clks IMX5_CLK_PWM1_HF_GATE>;
 				clock-names = "ipg", "per";
 				interrupts = <61>;
 			};
@@ -300,7 +318,7 @@
 				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
 				reg = <0x53fb8000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
-				         <&clks IMX5_CLK_PWM2_HF_GATE>;
+					 <&clks IMX5_CLK_PWM2_HF_GATE>;
 				clock-names = "ipg", "per";
 				interrupts = <94>;
 			};
@@ -310,7 +328,7 @@
 				reg = <0x53fbc000 0x4000>;
 				interrupts = <31>;
 				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
-				         <&clks IMX5_CLK_UART1_PER_GATE>;
+					 <&clks IMX5_CLK_UART1_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -320,7 +338,7 @@
 				reg = <0x53fc0000 0x4000>;
 				interrupts = <32>;
 				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
-				         <&clks IMX5_CLK_UART2_PER_GATE>;
+					 <&clks IMX5_CLK_UART2_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -346,6 +364,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 57 18>, <&iomuxc 18 89 11>;
 			};
 
 			gpio6: gpio@53fe0000 {
@@ -356,6 +375,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 27 18>, <&iomuxc 18 16 11>;
 			};
 
 			i2c3: i2c@53fec000 {
@@ -373,7 +393,7 @@
 				reg = <0x53ff0000 0x4000>;
 				interrupts = <13>;
 				clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
-				         <&clks IMX5_CLK_UART4_PER_GATE>;
+					 <&clks IMX5_CLK_UART4_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -391,7 +411,7 @@
 				reg = <0x63f90000 0x4000>;
 				interrupts = <86>;
 				clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
-				         <&clks IMX5_CLK_UART5_PER_GATE>;
+					 <&clks IMX5_CLK_UART5_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -410,7 +430,7 @@
 				reg = <0x63fac000 0x4000>;
 				interrupts = <37>;
 				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
-				         <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+					 <&clks IMX5_CLK_ECSPI2_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -420,7 +440,7 @@
 				reg = <0x63fb0000 0x4000>;
 				interrupts = <6>;
 				clocks = <&clks IMX5_CLK_SDMA_GATE>,
-				         <&clks IMX5_CLK_SDMA_GATE>;
+					 <&clks IMX5_CLK_SDMA_GATE>;
 				clock-names = "ipg", "ahb";
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
 			};
@@ -432,7 +452,7 @@
 				reg = <0x63fc0000 0x4000>;
 				interrupts = <38>;
 				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
-				         <&clks IMX5_CLK_CSPI_IPG_GATE>;
+					 <&clks IMX5_CLK_CSPI_IPG_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -482,8 +502,8 @@
 				reg = <0x63fec000 0x4000>;
 				interrupts = <87>;
 				clocks = <&clks IMX5_CLK_FEC_GATE>,
-				         <&clks IMX5_CLK_FEC_GATE>,
-				         <&clks IMX5_CLK_FEC_GATE>;
+					 <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
 			};
diff --git a/src/arm/imx51-babbage.dts b/src/arm/imx51-babbage.dts
index 018d24eb9965..f097b4f29ab4 100644
--- a/src/arm/imx51-babbage.dts
+++ b/src/arm/imx51-babbage.dts
@@ -388,7 +388,7 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -401,7 +401,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/src/arm/imx51-eukrea-mbimxsd51-baseboard.dts b/src/arm/imx51-eukrea-mbimxsd51-baseboard.dts
index d270df3e5891..728212861ece 100644
--- a/src/arm/imx51-eukrea-mbimxsd51-baseboard.dts
+++ b/src/arm/imx51-eukrea-mbimxsd51-baseboard.dts
@@ -261,14 +261,14 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/src/arm/imx51-ts4800.dts b/src/arm/imx51-ts4800.dts
index 0ff76a1bc0f1..ca1cc5eca80f 100644
--- a/src/arm/imx51-ts4800.dts
+++ b/src/arm/imx51-ts4800.dts
@@ -102,7 +102,7 @@
 	status = "okay";
 
 	rtc: m41t00@68 {
-		compatible = "stm,m41t00";
+		compatible = "st,m41t00";
 		reg = <0x68>;
 	};
 };
@@ -165,6 +165,27 @@
 			reg = <0x12000 0x1000>;
 			syscon = <&syscon 0x10 6>;
 		};
+
+		fpga_irqc: fpga-irqc@15000 {
+			compatible = "technologic,ts4800-irqc";
+			reg = <0x15000 0x1000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_interrupt_fpga>;
+			interrupt-parent = <&gpio2>;
+			interrupts= <9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		can@1a000 {
+			compatible = "technologic,sja1000";
+			reg = <0x1a000 0x100>;
+			interrupt-parent = <&fpga_irqc>;
+			interrupts = <1>;
+			reg-io-width = <2>;
+			nxp,tx-output-config = <0x06>;
+			nxp,external-clock-frequency = <24000000>;
+		};
 	};
 };
 
@@ -228,6 +249,12 @@
 		>;
 	};
 
+	pinctrl_interrupt_fpga: fpgaicgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_D27__GPIO2_9		0xe5
+		>;
+	};
+
 	pinctrl_lcd: lcdgrp {
 		fsl,pins = <
 			MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
diff --git a/src/arm/imx51.dtsi b/src/arm/imx51.dtsi
index f46fe9bf0bcb..1ee1d542d9ad 100644
--- a/src/arm/imx51.dtsi
+++ b/src/arm/imx51.dtsi
@@ -10,7 +10,6 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include "skeleton.dtsi"
 #include "imx51-pinfunc.h"
 #include <dt-bindings/clock/imx5-clock.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -18,6 +17,17 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
+
 	aliases {
 		ethernet0 = &fec;
 		gpio0 = &gpio1;
@@ -130,8 +140,8 @@
 			reg = <0x40000000 0x20000000>;
 			interrupts = <11 10>;
 			clocks = <&clks IMX5_CLK_IPU_GATE>,
-			         <&clks IMX5_CLK_IPU_DI0_GATE>,
-			         <&clks IMX5_CLK_IPU_DI1_GATE>;
+				 <&clks IMX5_CLK_IPU_DI0_GATE>,
+				 <&clks IMX5_CLK_IPU_DI1_GATE>;
 			clock-names = "bus", "di0", "di1";
 			resets = <&src 2>;
 
@@ -169,8 +179,8 @@
 					reg = <0x70004000 0x4000>;
 					interrupts = <1>;
 					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC1_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					status = "disabled";
 				};
@@ -180,8 +190,8 @@
 					reg = <0x70008000 0x4000>;
 					interrupts = <2>;
 					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC2_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -192,7 +202,7 @@
 					reg = <0x7000c000 0x4000>;
 					interrupts = <33>;
 					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
-					         <&clks IMX5_CLK_UART3_PER_GATE>;
+						 <&clks IMX5_CLK_UART3_PER_GATE>;
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
@@ -204,7 +214,7 @@
 					reg = <0x70010000 0x4000>;
 					interrupts = <36>;
 					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
-					         <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+						 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
@@ -229,8 +239,8 @@
 					reg = <0x70020000 0x4000>;
 					interrupts = <3>;
 					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC3_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -241,8 +251,8 @@
 					reg = <0x70024000 0x4000>;
 					interrupts = <4>;
 					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC4_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -364,7 +374,7 @@
 				reg = <0x73fa0000 0x4000>;
 				interrupts = <39>;
 				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
-				         <&clks IMX5_CLK_GPT_HF_GATE>;
+					 <&clks IMX5_CLK_GPT_HF_GATE>;
 				clock-names = "ipg", "per";
 			};
 
@@ -378,7 +388,7 @@
 				compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
 				reg = <0x73fb4000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
-				         <&clks IMX5_CLK_PWM1_HF_GATE>;
+					 <&clks IMX5_CLK_PWM1_HF_GATE>;
 				clock-names = "ipg", "per";
 				interrupts = <61>;
 			};
@@ -388,7 +398,7 @@
 				compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
 				reg = <0x73fb8000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
-				         <&clks IMX5_CLK_PWM2_HF_GATE>;
+					 <&clks IMX5_CLK_PWM2_HF_GATE>;
 				clock-names = "ipg", "per";
 				interrupts = <94>;
 			};
@@ -398,7 +408,7 @@
 				reg = <0x73fbc000 0x4000>;
 				interrupts = <31>;
 				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
-				         <&clks IMX5_CLK_UART1_PER_GATE>;
+					 <&clks IMX5_CLK_UART1_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -408,7 +418,7 @@
 				reg = <0x73fc0000 0x4000>;
 				interrupts = <32>;
 				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
-				         <&clks IMX5_CLK_UART2_PER_GATE>;
+					 <&clks IMX5_CLK_UART2_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -456,7 +466,7 @@
 				reg = <0x83fac000 0x4000>;
 				interrupts = <37>;
 				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
-				         <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+					 <&clks IMX5_CLK_ECSPI2_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -466,7 +476,7 @@
 				reg = <0x83fb0000 0x4000>;
 				interrupts = <6>;
 				clocks = <&clks IMX5_CLK_SDMA_GATE>,
-				         <&clks IMX5_CLK_SDMA_GATE>;
+					 <&clks IMX5_CLK_SDMA_GATE>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
@@ -479,7 +489,7 @@
 				reg = <0x83fc0000 0x4000>;
 				interrupts = <38>;
 				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
-				         <&clks IMX5_CLK_CSPI_IPG_GATE>;
+					 <&clks IMX5_CLK_CSPI_IPG_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -582,8 +592,8 @@
 				reg = <0x83fec000 0x4000>;
 				interrupts = <87>;
 				clocks = <&clks IMX5_CLK_FEC_GATE>,
-				         <&clks IMX5_CLK_FEC_GATE>,
-				         <&clks IMX5_CLK_FEC_GATE>;
+					 <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
 			};
diff --git a/src/arm/imx53-m53.dtsi b/src/arm/imx53-m53.dtsi
index 87a7fc709c2d..ec390aa562c3 100644
--- a/src/arm/imx53-m53.dtsi
+++ b/src/arm/imx53-m53.dtsi
@@ -12,8 +12,8 @@
 #include "imx53.dtsi"
 
 / {
-	model = "DENX M53";
-	compatible = "denx,imx53-m53", "fsl,imx53";
+	model = "Aries/DENX M53";
+	compatible = "aries,imx53-m53", "denx,imx53-m53", "fsl,imx53";
 
 	memory {
 		reg = <0x70000000 0x20000000>,
@@ -84,7 +84,7 @@
 	};
 
 	rtc: rtc@68 {
-		compatible = "stm,m41t62";
+		compatible = "st,m41t62";
 		reg = <0x68>;
 	};
 };
diff --git a/src/arm/imx53-m53evk.dts b/src/arm/imx53-m53evk.dts
index dcee1e0f968f..4347a321c782 100644
--- a/src/arm/imx53-m53evk.dts
+++ b/src/arm/imx53-m53evk.dts
@@ -13,8 +13,8 @@
 #include "imx53-m53.dtsi"
 
 / {
-	model = "DENX M53EVK";
-	compatible = "denx,imx53-m53evk", "fsl,imx53";
+	model = "Aries/DENX M53EVK";
+	compatible = "aries,imx53-m53evk", "denx,imx53-m53evk", "fsl,imx53";
 
 	display1: display@di1 {
 		compatible = "fsl,imx-parallel-display";
diff --git a/src/arm/imx53-qsb.dts b/src/arm/imx53-qsb.dts
index dec4b073ceb1..379939699164 100644
--- a/src/arm/imx53-qsb.dts
+++ b/src/arm/imx53-qsb.dts
@@ -64,8 +64,8 @@
 			};
 
 			ldo3_reg: ldo3 {
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1725000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 			};
 
@@ -76,8 +76,8 @@
 			};
 
 			ldo5_reg: ldo5 {
-				regulator-min-microvolt = <1725000>;
-				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
 				regulator-always-on;
 			};
 
@@ -100,14 +100,14 @@
 			};
 
 			ldo9_reg: ldo9 {
-				regulator-min-microvolt = <1200000>;
+				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3600000>;
 				regulator-always-on;
 			};
 
 			ldo10_reg: ldo10 {
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <3650000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
 				regulator-always-on;
 			};
 		};
diff --git a/src/arm/imx53-smd.dts b/src/arm/imx53-smd.dts
index 542ab9e697fb..9f5190040555 100644
--- a/src/arm/imx53-smd.dts
+++ b/src/arm/imx53-smd.dts
@@ -56,7 +56,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/src/arm/imx53-tqma53.dtsi b/src/arm/imx53-tqma53.dtsi
index e03373a58760..91a6a9ff50d7 100644
--- a/src/arm/imx53-tqma53.dtsi
+++ b/src/arm/imx53-tqma53.dtsi
@@ -218,7 +218,7 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "disabled";
 };
 
diff --git a/src/arm/imx53-tx53.dtsi b/src/arm/imx53-tx53.dtsi
index bd3dfefa5778..57e75f1639e0 100644
--- a/src/arm/imx53-tx53.dtsi
+++ b/src/arm/imx53-tx53.dtsi
@@ -513,21 +513,21 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/src/arm/imx53-usbarmory.dts b/src/arm/imx53-usbarmory.dts
new file mode 100644
index 000000000000..6782d7fc5961
--- /dev/null
+++ b/src/arm/imx53-usbarmory.dts
@@ -0,0 +1,224 @@
+/*
+ * USB armory MkI device tree file
+ * https://inversepath.com/usbarmory
+ *
+ * Copyright (C) 2015, Inverse Path
+ * Andrej Rosano <andrej@inversepath.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx53.dtsi"
+
+/ {
+	model = "Inverse Path USB armory";
+	compatible = "inversepath,imx53-usbarmory", "fsl,imx53";
+};
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x70000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		user {
+			label = "LED";
+			gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+/*
+ * Not every i.MX53 P/N supports clock > 800MHz.
+ * As USB armory does not mount a specific P/N set a safe clock upper limit.
+ */
+&cpu0 {
+	operating-points = <
+		/* kHz */
+		166666  850000
+		400000  900000
+		800000 1050000
+	>;
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_i2c1_pmic: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL	0x80
+			MX53_PAD_EIM_D28__I2C1_SDA	0x80
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX53_PAD_DISP0_DAT6__GPIO4_27 0x1e4
+		>;
+	};
+
+	/*
+	 * UART mode pin header configration
+	 * 3 - GPIO5[26], pull-down 100K
+	 * 4 - GPIO5[27], pull-down 100K
+	 * 5 - TX, pull-up 100K
+	 * 6 - RX, pull-up 100K
+	 * 7 - GPIO5[30], pull-down 100K
+	 */
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT8__GPIO5_26		0xc0
+			MX53_PAD_CSI0_DAT9__GPIO5_27		0xc0
+			MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
+			MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
+			MX53_PAD_CSI0_DAT12__GPIO5_30		0xc0
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&pinctrl_i2c1_pmic>;
+	status = "okay";
+
+	ltc3589: pmic@34 {
+		compatible = "lltc,ltc3589-2";
+		reg = <0x34>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <591930>;
+				regulator-max-microvolt = <1224671>;
+				lltc,fb-voltage-divider = <100000 158000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <704123>;
+				regulator-max-microvolt = <1456803>;
+				lltc,fb-voltage-divider = <180000 191000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1341250>;
+				regulator-max-microvolt = <2775000>;
+				lltc,fb-voltage-divider = <270000 100000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bb_out_reg: bb-out {
+				regulator-min-microvolt = <3387341>;
+				regulator-max-microvolt = <3387341>;
+				lltc,fb-voltage-divider = <511000 158000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = <1306329>;
+				regulator-max-microvolt = <1306329>;
+				lltc,fb-voltage-divider = <100000 158000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = <704123>;
+				regulator-max-microvolt = <1456806>;
+				lltc,fb-voltage-divider = <180000 191000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3200000>;
+			};
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/src/arm/imx53.dtsi b/src/arm/imx53.dtsi
index cd170376eaca..2e516f4985e4 100644
--- a/src/arm/imx53.dtsi
+++ b/src/arm/imx53.dtsi
@@ -10,7 +10,6 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include "skeleton.dtsi"
 #include "imx53-pinfunc.h"
 #include <dt-bindings/clock/imx5-clock.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -18,6 +17,17 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
+
 	aliases {
 		ethernet0 = &fec;
 		gpio0 = &gpio1;
@@ -131,11 +141,19 @@
 			reg = <0x18000000 0x08000000>;
 			interrupts = <11 10>;
 			clocks = <&clks IMX5_CLK_IPU_GATE>,
-			         <&clks IMX5_CLK_IPU_DI0_GATE>,
-			         <&clks IMX5_CLK_IPU_DI1_GATE>;
+				 <&clks IMX5_CLK_IPU_DI0_GATE>,
+				 <&clks IMX5_CLK_IPU_DI1_GATE>;
 			clock-names = "bus", "di0", "di1";
 			resets = <&src 2>;
 
+			ipu_csi0: port@0 {
+				reg = <0>;
+			};
+
+			ipu_csi1: port@1 {
+				reg = <1>;
+			};
+
 			ipu_di0: port@2 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -191,8 +209,8 @@
 					reg = <0x50004000 0x4000>;
 					interrupts = <1>;
 					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC1_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -203,8 +221,8 @@
 					reg = <0x50008000 0x4000>;
 					interrupts = <2>;
 					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC2_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -215,8 +233,10 @@
 					reg = <0x5000c000 0x4000>;
 					interrupts = <33>;
 					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
-					         <&clks IMX5_CLK_UART3_PER_GATE>;
+						 <&clks IMX5_CLK_UART3_PER_GATE>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 42 4 0>, <&sdma 43 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -227,7 +247,7 @@
 					reg = <0x50010000 0x4000>;
 					interrupts = <36>;
 					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
-					         <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+						 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
@@ -254,8 +274,8 @@
 					reg = <0x50020000 0x4000>;
 					interrupts = <3>;
 					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC3_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -266,8 +286,8 @@
 					reg = <0x50024000 0x4000>;
 					interrupts = <4>;
 					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC4_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -409,7 +429,7 @@
 				reg = <0x53fa0000 0x4000>;
 				interrupts = <39>;
 				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
-				         <&clks IMX5_CLK_GPT_HF_GATE>;
+					 <&clks IMX5_CLK_GPT_HF_GATE>;
 				clock-names = "ipg", "per";
 			};
 
@@ -430,11 +450,11 @@
 				reg = <0x53fa8008 0x4>;
 				gpr = <&gpr>;
 				clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
-				         <&clks IMX5_CLK_LDB_DI1_SEL>,
-				         <&clks IMX5_CLK_IPU_DI0_SEL>,
-				         <&clks IMX5_CLK_IPU_DI1_SEL>,
-				         <&clks IMX5_CLK_LDB_DI0_GATE>,
-				         <&clks IMX5_CLK_LDB_DI1_GATE>;
+					 <&clks IMX5_CLK_LDB_DI1_SEL>,
+					 <&clks IMX5_CLK_IPU_DI0_SEL>,
+					 <&clks IMX5_CLK_IPU_DI1_SEL>,
+					 <&clks IMX5_CLK_LDB_DI0_GATE>,
+					 <&clks IMX5_CLK_LDB_DI1_GATE>;
 				clock-names = "di0_pll", "di1_pll",
 					      "di0_sel", "di1_sel",
 					      "di0", "di1";
@@ -476,7 +496,7 @@
 				compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
 				reg = <0x53fb4000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
-				         <&clks IMX5_CLK_PWM1_HF_GATE>;
+					 <&clks IMX5_CLK_PWM1_HF_GATE>;
 				clock-names = "ipg", "per";
 				interrupts = <61>;
 			};
@@ -486,7 +506,7 @@
 				compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
 				reg = <0x53fb8000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
-				         <&clks IMX5_CLK_PWM2_HF_GATE>;
+					 <&clks IMX5_CLK_PWM2_HF_GATE>;
 				clock-names = "ipg", "per";
 				interrupts = <94>;
 			};
@@ -496,8 +516,10 @@
 				reg = <0x53fbc000 0x4000>;
 				interrupts = <31>;
 				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
-				         <&clks IMX5_CLK_UART1_PER_GATE>;
+					 <&clks IMX5_CLK_UART1_PER_GATE>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 18 4 0>, <&sdma 19 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -506,8 +528,10 @@
 				reg = <0x53fc0000 0x4000>;
 				interrupts = <32>;
 				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
-				         <&clks IMX5_CLK_UART2_PER_GATE>;
+					 <&clks IMX5_CLK_UART2_PER_GATE>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 12 4 0>, <&sdma 13 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -516,7 +540,7 @@
 				reg = <0x53fc8000 0x4000>;
 				interrupts = <82>;
 				clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
-				         <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
+					 <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -526,7 +550,7 @@
 				reg = <0x53fcc000 0x4000>;
 				interrupts = <83>;
 				clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,
-				         <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
+					 <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -589,8 +613,10 @@
 				reg = <0x53ff0000 0x4000>;
 				interrupts = <13>;
 				clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
-				         <&clks IMX5_CLK_UART4_PER_GATE>;
+					 <&clks IMX5_CLK_UART4_PER_GATE>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 2 4 0>, <&sdma 3 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 		};
@@ -619,8 +645,10 @@
 				reg = <0x63f90000 0x4000>;
 				interrupts = <86>;
 				clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
-				         <&clks IMX5_CLK_UART5_PER_GATE>;
+					 <&clks IMX5_CLK_UART5_PER_GATE>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 16 4 0>, <&sdma 17 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -638,7 +666,7 @@
 				reg = <0x63fac000 0x4000>;
 				interrupts = <37>;
 				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
-				         <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+					 <&clks IMX5_CLK_ECSPI2_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -648,7 +676,7 @@
 				reg = <0x63fb0000 0x4000>;
 				interrupts = <6>;
 				clocks = <&clks IMX5_CLK_SDMA_GATE>,
-				         <&clks IMX5_CLK_SDMA_GATE>;
+					 <&clks IMX5_CLK_SDMA_GATE>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
@@ -661,7 +689,7 @@
 				reg = <0x63fc0000 0x4000>;
 				interrupts = <38>;
 				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
-				         <&clks IMX5_CLK_CSPI_IPG_GATE>;
+					 <&clks IMX5_CLK_CSPI_IPG_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -737,8 +765,8 @@
 				reg = <0x63fec000 0x4000>;
 				interrupts = <87>;
 				clocks = <&clks IMX5_CLK_FEC_GATE>,
-				         <&clks IMX5_CLK_FEC_GATE>,
-				         <&clks IMX5_CLK_FEC_GATE>;
+					 <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
 			};
@@ -748,7 +776,7 @@
 				reg = <0x63ff0000 0x1000>;
 				interrupts = <92>;
 				clocks = <&clks IMX5_CLK_TVE_GATE>,
-				         <&clks IMX5_CLK_IPU_DI1_SEL>;
+					 <&clks IMX5_CLK_IPU_DI1_SEL>;
 				clock-names = "tve", "di_sel";
 				status = "disabled";
 
@@ -764,7 +792,7 @@
 				reg = <0x63ff4000 0x1000>;
 				interrupts = <9>;
 				clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
-				         <&clks IMX5_CLK_VPU_GATE>;
+					 <&clks IMX5_CLK_VPU_GATE>;
 				clock-names = "per", "ahb";
 				resets = <&src 1>;
 				iram = <&ocram>;
@@ -775,7 +803,7 @@
 				reg = <0x63ff8000 0x4000>;
 				interrupts = <19 20>;
 				clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
-				         <&clks IMX5_CLK_SAHARA_IPG_GATE>;
+					 <&clks IMX5_CLK_SAHARA_IPG_GATE>;
 				clock-names = "ipg", "ahb";
 			};
 		};
diff --git a/src/arm/imx6dl-colibri-eval-v3.dts b/src/arm/imx6dl-colibri-eval-v3.dts
new file mode 100644
index 000000000000..e0c21727866d
--- /dev/null
+++ b/src/arm/imx6dl-colibri-eval-v3.dts
@@ -0,0 +1,253 @@
+/*
+ * Copyright 2014-2016 Toradex AG
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6dl.dtsi"
+#include "imx6qdl-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl",
+		     "fsl,imx6dl";
+
+	aliases {
+		i2c0 = &i2c2;
+		i2c1 = &i2c3;
+	};
+
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	clocks {
+		/* Fixed crystal dedicated to mcp251x */
+		clk16m: clk@1 {
+			compatible = "fixed-clock";
+			reg = <1>;
+			#clock-cells = <0>;
+			clock-frequency = <16000000>;
+			clock-output-names = "clk16m";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		wakeup {
+			label = "Wake-Up";
+			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	lcd_display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+};
+
+&backlight {
+	brightness-levels = <0 127 191 223 239 247 251 255>;
+	default-brightness-level = <1>;
+	status = "okay";
+};
+
+/* Colibri SSP */
+&ecspi4 {
+	status = "okay";
+
+	mcp251x0: mcp251x@1 {
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		clocks = <&clk16m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 0x2>;
+		spi-max-frequency = <10000000>;
+		status = "okay";
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+/*
+ * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
+ */
+&i2c3 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t00";
+		reg = <0x68>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mmc_cd>;
+	cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	/* weim memory map: 32MB on CS0, 32MB on CS1, 32MB on CS2 */
+	ranges = <0 0 0x08000000 0x02000000
+		  1 0 0x0a000000 0x02000000
+		  2 0 0x0c000000 0x02000000>;
+
+	/* SRAM on Colibri nEXT_CS0 */
+	sram@0,0 {
+		compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram";
+		reg = <0 0 0x00010000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <2>;
+		fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
+				      0x00000000 0x04000040 0x00000000>;
+	};
+
+	/* SRAM on Colibri nEXT_CS1 */
+	sram@1,0 {
+		compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram";
+		reg = <1 0 0x00010000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <2>;
+		fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
+				      0x00000000 0x04000040 0x00000000>;
+	};
+};
diff --git a/src/arm/imx6dl-gw553x.dts b/src/arm/imx6dl-gw553x.dts
new file mode 100644
index 000000000000..59b8afc36e66
--- /dev/null
+++ b/src/arm/imx6dl-gw553x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2016 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw553x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW553X";
+	compatible = "gw,imx6dl-gw553x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/src/arm/imx6dl-icore.dts b/src/arm/imx6dl-icore.dts
new file mode 100644
index 000000000000..aec332c14af1
--- /dev/null
+++ b/src/arm/imx6dl-icore.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 DualLite/Solo Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6dl";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
diff --git a/src/arm/imx6dl-riotboard.dts b/src/arm/imx6dl-riotboard.dts
index bfbed52ce1bd..2cb72824e800 100644
--- a/src/arm/imx6dl-riotboard.dts
+++ b/src/arm/imx6dl-riotboard.dts
@@ -97,6 +97,7 @@
 	phy-reset-gpios = <&gpio3 31 0>;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
 };
 
@@ -375,21 +376,21 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1		/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0		/* AR8035 pin strapping: IO voltage: pull up */
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x130b0		/* AR8035 pin strapping: PHYADDR#0: pull down */
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x130b0		/* AR8035 pin strapping: PHYADDR#1: pull down */
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0		/* AR8035 pin strapping: MODE#1: pull up */
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0		/* AR8035 pin strapping: MODE#3: pull up */
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030		/* AR8035 pin strapping: IO voltage: pull up */
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030		/* AR8035 pin strapping: PHYADDR#0: pull down */
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030		/* AR8035 pin strapping: PHYADDR#1: pull down */
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030		/* AR8035 pin strapping: MODE#1: pull up */
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030		/* AR8035 pin strapping: MODE#3: pull up */
 				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0		/* AR8035 pin strapping: MODE#0: pull down */
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8	/* GPIO16 -> AR8035 25MHz */
-			        MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0		/* RGMII_nRST */
+				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0		/* RGMII_nRST */
 				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x180b0		/* AR8035 interrupt */
 				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
diff --git a/src/arm/imx6dl-ts4900.dts b/src/arm/imx6dl-ts4900.dts
new file mode 100644
index 000000000000..85eddeb30e21
--- /dev/null
+++ b/src/arm/imx6dl-ts4900.dts
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2015 Technologic Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-ts4900.dtsi"
+
+/ {
+	model = "Technologic Systems i.MX6 Solo/DualLite TS-4900 (Default Device Tree)";
+	compatible = "technologic,imx6dl-ts4900", "fsl,imx6dl";
+};
diff --git a/src/arm/imx6dl-tx6dl-comtft.dts b/src/arm/imx6dl-tx6dl-comtft.dts
index 063fe7510da5..aac42ac465b6 100644
--- a/src/arm/imx6dl-tx6dl-comtft.dts
+++ b/src/arm/imx6dl-tx6dl-comtft.dts
@@ -105,7 +105,7 @@
 				pixelclk-active = <1>;
 			};
 		};
-        };
+	};
 };
 
 &can1 {
diff --git a/src/arm/imx6dl-tx6u-801x.dts b/src/arm/imx6dl-tx6u-801x.dts
index b7a72840b7f0..d1f1298ec55a 100644
--- a/src/arm/imx6dl-tx6u-801x.dts
+++ b/src/arm/imx6dl-tx6u-801x.dts
@@ -199,7 +199,7 @@
 				pixelclk-active = <0>;
 			};
 		};
-        };
+	};
 };
 
 &ipu1_di0_disp0 {
diff --git a/src/arm/imx6dl.dtsi b/src/arm/imx6dl.dtsi
index 9a4c22c2dade..7aa120fbdc71 100644
--- a/src/arm/imx6dl.dtsi
+++ b/src/arm/imx6dl.dtsi
@@ -111,6 +111,59 @@
 	};
 };
 
+&gpio1 {
+	gpio-ranges = <&iomuxc  0 131 2>, <&iomuxc  2 137 8>, <&iomuxc 10 189 2>,
+		      <&iomuxc 12 194 1>, <&iomuxc 13 193 1>, <&iomuxc 14 192 1>,
+		      <&iomuxc 15 191 1>, <&iomuxc 16 185 2>, <&iomuxc 18 184 1>,
+		      <&iomuxc 19 187 1>, <&iomuxc 20 183 1>, <&iomuxc 21 188 1>,
+		      <&iomuxc 22 123 3>, <&iomuxc 25 121 1>, <&iomuxc 26 127 1>,
+		      <&iomuxc 27 126 1>, <&iomuxc 28 128 1>, <&iomuxc 29 130 1>,
+		      <&iomuxc 30 129 1>, <&iomuxc 31 122 1>;
+};
+
+&gpio2 {
+	gpio-ranges = <&iomuxc  0 161 8>, <&iomuxc  8 208 8>, <&iomuxc 16  74 1>,
+		      <&iomuxc 17  73 1>, <&iomuxc 18  72 1>, <&iomuxc 19  71 1>,
+		      <&iomuxc 20  70 1>, <&iomuxc 21  69 1>, <&iomuxc 22  68 1>,
+		      <&iomuxc 23  79 2>, <&iomuxc 25 118 2>, <&iomuxc 27 117 1>,
+		      <&iomuxc 28 113 4>;
+};
+
+&gpio3 {
+	gpio-ranges = <&iomuxc  0 97  2>, <&iomuxc 2 105 8>, <&iomuxc 10 99 6>,
+		      <&iomuxc 16 81 16>;
+};
+
+&gpio4 {
+	gpio-ranges = <&iomuxc  5 136 1>, <&iomuxc  6 145 1>, <&iomuxc  7 150 1>,
+		      <&iomuxc  8 146 1>, <&iomuxc  9 151 1>, <&iomuxc 10 147 1>,
+		      <&iomuxc 11 152 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>,
+		      <&iomuxc 14 149 1>, <&iomuxc 15 154 1>, <&iomuxc 16  39 7>,
+		      <&iomuxc 23  56 1>, <&iomuxc 24  61 7>, <&iomuxc 31  46 1>;
+};
+
+&gpio5 {
+	gpio-ranges = <&iomuxc  0 120 1>, <&iomuxc  2 77 1>, <&iomuxc  4 76 1>,
+		      <&iomuxc  5  47 9>, <&iomuxc 14 57 4>, <&iomuxc 18 37 1>,
+		      <&iomuxc 19  36 1>, <&iomuxc 20 35 1>, <&iomuxc 21 38 1>,
+		      <&iomuxc 22  29 6>, <&iomuxc 28 19 4>;
+};
+
+&gpio6 {
+	gpio-ranges = <&iomuxc  0  23 6>, <&iomuxc  6  75 1>, <&iomuxc  7 156 1>,
+		      <&iomuxc  8 155 1>, <&iomuxc  9 170 1>, <&iomuxc 10 169 1>,
+		      <&iomuxc 11 157 1>, <&iomuxc 14 158 3>, <&iomuxc 17 204 1>,
+		      <&iomuxc 18 203 1>, <&iomuxc 19 182 1>, <&iomuxc 20 177 4>,
+		      <&iomuxc 24 175 1>, <&iomuxc 25 171 1>, <&iomuxc 26 181 1>,
+		      <&iomuxc 27 172 3>, <&iomuxc 30 176 1>, <&iomuxc 31  78 1>;
+};
+
+&gpio7 {
+	gpio-ranges = <&iomuxc 0 202 1>, <&iomuxc  1 201 1>, <&iomuxc  2 196 1>,
+		      <&iomuxc 3 195 1>, <&iomuxc  4 197 4>, <&iomuxc  8 205 1>,
+		      <&iomuxc 9 207 1>, <&iomuxc 10 206 1>, <&iomuxc 11 133 3>;
+};
+
 &gpt {
 	compatible = "fsl,imx6dl-gpt";
 };
diff --git a/src/arm/imx6q-apalis-ixora.dts b/src/arm/imx6q-apalis-ixora.dts
index 8e67ca27ad79..0ea75f7b6039 100644
--- a/src/arm/imx6q-apalis-ixora.dts
+++ b/src/arm/imx6q-apalis-ixora.dts
@@ -93,7 +93,7 @@
 			reg = <0>;
 
 			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp1>;
+				remote-endpoint = <&ipu1_di1_disp1>;
 			};
 		};
 
@@ -147,28 +147,6 @@
 			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 		};
 	};
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		ledpwm1 {
-			label = "PWM1";
-			pwms = <&pwm1 0 50000>;
-			max-brightness = <255>;
-		};
-
-		ledpwm2 {
-			label = "PWM2";
-			pwms = <&pwm2 0 50000>;
-			max-brightness = <255>;
-		};
-
-		ledpwm3 {
-			label = "PWM3";
-			pwms = <&pwm3 0 50000>;
-			max-brightness = <255>;
-		};
-	};
 };
 
 &backlight {
@@ -210,7 +188,7 @@
 	};
 };
 
-&ipu1_di0_disp1 {
+&ipu1_di1_disp1 {
 	remote-endpoint = <&lcd_display_in>;
 };
 
diff --git a/src/arm/imx6q-arm2.dts b/src/arm/imx6q-arm2.dts
index d6515f7a56c4..4989d0bff10f 100644
--- a/src/arm/imx6q-arm2.dts
+++ b/src/arm/imx6q-arm2.dts
@@ -79,19 +79,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
 		};
@@ -185,6 +185,7 @@
 	phy-mode = "rgmii";
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
 };
 
@@ -218,7 +219,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
 	fsl,dte-mode;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/src/arm/imx6q-b450v3.dts b/src/arm/imx6q-b450v3.dts
index f0a2be5268e3..78bfc1a307d6 100644
--- a/src/arm/imx6q-b450v3.dts
+++ b/src/arm/imx6q-b450v3.dts
@@ -89,3 +89,19 @@
 		};
 	};
 };
+
+&pca9539 {
+	P04 {
+		gpio-hog;
+		gpios = <4 0>;
+		output-low;
+		line-name = "PCA9539-P04";
+	};
+
+	P05 {
+		gpio-hog;
+		gpios = <5 0>;
+		output-low;
+		line-name = "PCA9539-P05";
+	};
+};
diff --git a/src/arm/imx6q-b650v3.dts b/src/arm/imx6q-b650v3.dts
index 33cb71acadcc..1dcaee23ed9c 100644
--- a/src/arm/imx6q-b650v3.dts
+++ b/src/arm/imx6q-b650v3.dts
@@ -89,3 +89,18 @@
 		};
 	};
 };
+
+&pca9539 {
+	P05 {
+		gpio-hog;
+		gpios = <5 0>;
+		output-low;
+		line-name = "PCA9539-P05";
+	};
+};
+
+&usbphy1 {
+	fsl,tx-cal-45-dn-ohms = <55>;
+	fsl,tx-cal-45-dp-ohms = <55>;
+	fsl,tx-d-cal = <100>;
+};
diff --git a/src/arm/imx6q-ba16.dtsi b/src/arm/imx6q-ba16.dtsi
index f7e17e2004ac..308e11cea1db 100644
--- a/src/arm/imx6q-ba16.dtsi
+++ b/src/arm/imx6q-ba16.dtsi
@@ -351,7 +351,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -448,19 +448,19 @@
 		fsl,pins = <
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x100b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x100b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x100b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x100b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x100b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x100b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x100b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x100b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
 			/* FEC Reset */
 			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28     0x1b0b0
 			/* AR8033 Interrupt */
diff --git a/src/arm/imx6q-bx50v3.dtsi b/src/arm/imx6q-bx50v3.dtsi
index bb66dfd5294c..e4a415fd899b 100644
--- a/src/arm/imx6q-bx50v3.dtsi
+++ b/src/arm/imx6q-bx50v3.dtsi
@@ -52,6 +52,12 @@
 		};
 	};
 
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+		status = "okay";
+	};
+
 	reg_wl18xx_vmmc: regulator-wl18xx {
 		compatible = "regulator-fixed";
 		regulator-name = "vwl1807";
@@ -177,6 +183,76 @@
 				interrupt-controller;
 				interrupt-parent = <&gpio2>;
 				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+				P06 {
+					gpio-hog;
+					gpios = <6 0>;
+					output-low;
+					line-name = "PCA9539-P06";
+				};
+
+				P07 {
+					gpio-hog;
+					gpios = <7 0>;
+					output-low;
+					line-name = "PCA9539-P07";
+				};
+
+				P10 {
+					gpio-hog;
+					gpios = <8 0>;
+					output-low;
+					line-name = "PCA9539-P10";
+				};
+
+				P11 {
+					gpio-hog;
+					gpios = <9 0>;
+					output-low;
+					line-name = "PCA9539-P11";
+				};
+
+				P12 {
+					gpio-hog;
+					gpios = <10 0>;
+					output-low;
+					line-name = "PCA9539-P12";
+				};
+
+				P13 {
+					gpio-hog;
+					gpios = <11 0>;
+					output-low;
+					line-name = "PCA9539-P13";
+				};
+
+				P14 {
+					gpio-hog;
+					gpios = <12 0>;
+					output-low;
+					line-name = "PCA9539-P14";
+				};
+
+				P15 {
+					gpio-hog;
+					gpios = <13 0>;
+					output-low;
+					line-name = "PCA9539-P15";
+				};
+
+				P16 {
+					gpio-hog;
+					gpios = <14 0>;
+					output-low;
+					line-name = "PCA9539-P16";
+				};
+
+				P17 {
+					gpio-hog;
+					gpios = <15 0>;
+					output-low;
+					line-name = "PCA9539-P17";
+				};
 			};
 		};
 
diff --git a/src/arm/imx6q-cm-fx6.dts b/src/arm/imx6q-cm-fx6.dts
index 99b46f8030ad..a150bca84daa 100644
--- a/src/arm/imx6q-cm-fx6.dts
+++ b/src/arm/imx6q-cm-fx6.dts
@@ -3,15 +3,46 @@
  *
  * Author: Valentin Raevsky <valentin@compulab.co.il>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx6q.dtsi"
 
 / {
@@ -31,6 +62,71 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	reg_pcie_power_on_gpio: regulator-pcie-power-on-gpio {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-pcie-power-on-gpio";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_h1_vbus: usb_h1_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: usb_otg_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	/*
+	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+	 * the module behaves unstable at this frequency. Hence, remove the
+	 * 1.2GHz operation point here.
+	 */
+	operating-points = <
+		/* kHz	uV */
+		996000	1250000
+		852000	1250000
+		792000	1175000
+		396000	975000
+	>;
+	fsl,soc-operating-points = <
+		/* ARM kHz	SOC-PU uV */
+		996000		1250000
+		852000		1250000
+		792000		1175000
+		396000		1175000
+	>;
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
 };
 
 &fec {
@@ -46,58 +142,121 @@
 	status = "okay";
 };
 
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+	clock-frequency = <100000>;
+
+	eeprom@50 {
+		compatible = "at24,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
 &iomuxc {
-	imx6q-cm-fx6 {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK	0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO	0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI	0x100b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30	0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x100b1
+		>;
+	};
 
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
-			>;
-		};
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+		>;
+	};
 
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
 	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x130b0
+		>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>;
+	vdd-supply = <&reg_pcie_power_on_gpio>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
 };
 
 &uart4 {
@@ -105,3 +264,18 @@
 	pinctrl-0 = <&pinctrl_uart4>;
 	status = "okay";
 };
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/src/arm/imx6q-dmo-edmqmx6.dts b/src/arm/imx6q-dmo-edmqmx6.dts
index 364578d707a5..908dab68bdca 100644
--- a/src/arm/imx6q-dmo-edmqmx6.dts
+++ b/src/arm/imx6q-dmo-edmqmx6.dts
@@ -282,7 +282,7 @@
 	};
 
 	rtc: m41t62@68 {
-		compatible = "stm,m41t62";
+		compatible = "st,m41t62";
 		reg = <0x68>;
 	};
 };
@@ -324,18 +324,18 @@
 
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
diff --git a/src/arm/imx6q-evi.dts b/src/arm/imx6q-evi.dts
index 4fa56019225e..7c7c1a855ece 100644
--- a/src/arm/imx6q-evi.dts
+++ b/src/arm/imx6q-evi.dts
@@ -139,6 +139,9 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio1 25 0>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
 };
 
@@ -229,10 +232,7 @@
 };
 
 &weim {
-	#address-cells = <2>;
-	#size-cells = <1>;
 	ranges = <0 0 0x08000000 0x08000000>;
-	fsl,weim-cs-gpr = <&gpr>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_weimfpga &pinctrl_weimcs>;
 	status = "okay";
@@ -303,21 +303,22 @@
 		fsl,pins = <
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
 			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x4001b0a8
 			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+			MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
 		>;
 	};
 
diff --git a/src/arm/imx6q-gw5400-a.dts b/src/arm/imx6q-gw5400-a.dts
index 0511137d1e23..747bc104ad00 100644
--- a/src/arm/imx6q-gw5400-a.dts
+++ b/src/arm/imx6q-gw5400-a.dts
@@ -421,18 +421,18 @@
 
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
diff --git a/src/arm/imx6q-gw553x.dts b/src/arm/imx6q-gw553x.dts
new file mode 100644
index 000000000000..e9c224cea752
--- /dev/null
+++ b/src/arm/imx6q-gw553x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2016 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw553x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW553X";
+	compatible = "gw,imx6q-gw553x", "gw,ventana", "fsl,imx6q";
+};
diff --git a/src/arm/imx6q-h100.dts b/src/arm/imx6q-h100.dts
new file mode 100644
index 000000000000..65e66f994f88
--- /dev/null
+++ b/src/arm/imx6q-h100.dts
@@ -0,0 +1,395 @@
+/*
+ * Copyright (C) 2015 Lucas Stach <kernel@pengutronix.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-microsom.dtsi"
+#include "imx6qdl-microsom-ar8035.dtsi"
+
+/ {
+	model = "Auvidea H100";
+	compatible = "auvidea,h100", "fsl,imx6q";
+
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	hdmi_osc: hdmi-osc {
+		compatible = "fixed-clock";
+		clock-output-names = "hdmi-osc";
+		clock-frequency = <27000000>;
+		#clock-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_leds>;
+
+		led0: power {
+			label = "power";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led1: stream {
+			label = "stream";
+			gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2: rec {
+			label = "rec";
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_hdmi: regulator-hdmi {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_reg_hdmi>;
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		regulator-name = "V_HDMI";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_nvcc_sd2: regulator-nvcc-sd2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_reg_nvcc_sd2>;
+		compatible = "regulator-gpio";
+		regulator-name = "NVCC_SD2";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+	};
+
+	reg_usbh1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_usbh1_vbus>;
+		regulator-name = "USB_H1_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbotg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_usbotg_vbus>;
+		regulator-name = "USB_OTG_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sound-sgtl5000 {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "H100 on-board codec";
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-ext-port = <5>;
+		mux-int-port = <1>;
+		ssi-controller = <&ssi1>;
+	};
+};
+
+&audmux {
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_i2c1>;
+	status = "okay";
+
+	eeprom: 24c02@51 {
+		compatible = "microchip,24c02", "at24";
+		reg = <0x51>;
+	};
+
+	rtc: pcf8523@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	sgtl5000: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_sgtl5000>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	tc358743: tc358743@0f {
+		compatible = "toshiba,tc358743";
+		reg = <0x0f>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_tc358743>;
+		clocks = <&hdmi_osc>;
+		clock-names = "refclk";
+		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+		/* IRQ has a wrong pull resistor which renders it useless  */
+
+		port@0 {
+			tc358743_out: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				data-lanes = <1 2 3 4>;
+				clock-lanes = <0>;
+				clock-noncontinuous;
+				link-frequencies = /bits/ 64 <297000000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	h100 {
+		pinctrl_h100_hdmi: h100-hdmi {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+			>;
+		};
+
+		pinctrl_h100_i2c1: h100-i2c1 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_h100_i2c2: h100-i2c2 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_h100_leds: pinctrl-h100-leds {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b0
+				MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
+				MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_reg_hdmi: h100-reg-hdmi {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_reg_nvcc_sd2: h100-reg-nvcc-sd2 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_sgtl5000: h100-sgtl5000 {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
+				MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0
+				MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x110b0
+				MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0
+				MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
+			>;
+		};
+
+		pinctrl_h100_tc358743: h100-tc358743 {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_uart2: h100-uart2 {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_h100_usbh1_vbus: hummingboard-usbh1-vbus {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_usbotg_id: hummingboard-usbotg-id {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
+			>;
+		};
+
+		pinctrl_h100_usbotg_vbus: hummingboard-usbotg-vbus {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_usdhc2: h100-usdhc2 {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x13059
+			>;
+		};
+
+		pinctrl_h100_usdhc2_100mhz: h100-usdhc2-100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+			>;
+		};
+
+		pinctrl_h100_usdhc2_200mhz: h100-usdhc2-200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			>;
+		};
+	};
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&tc358743_out>;
+			data-lanes = <1 2 3 4>;
+			clock-lanes = <0>;
+			clock-noncontinuous;
+			link-frequencies = /bits/ 64 <297000000>;
+		};
+	};
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_usbotg_id>;
+	vbus-supply = <&reg_usbotg_vbus>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_h100_usdhc2>;
+	pinctrl-1 = <&pinctrl_h100_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_h100_usdhc2_200mhz>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_nvcc_sd2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/src/arm/imx6q-icore.dts b/src/arm/imx6q-icore.dts
new file mode 100644
index 000000000000..025f54350c28
--- /dev/null
+++ b/src/arm/imx6q-icore.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6q";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
diff --git a/src/arm/imx6q-marsboard.dts b/src/arm/imx6q-marsboard.dts
index 3f8013c85fb9..f7995c513b67 100644
--- a/src/arm/imx6q-marsboard.dts
+++ b/src/arm/imx6q-marsboard.dts
@@ -252,26 +252,26 @@
 		fsl,pins = <
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 			/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
 			/* AR8035 pin strapping: IO voltage: pull up */
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
 			/* AR8035 pin strapping: PHYADDR#0: pull down */
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x130b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
 			/* AR8035 pin strapping: PHYADDR#1: pull down */
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x130b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
 			/* AR8035 pin strapping: MODE#1: pull up */
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
 			/* AR8035 pin strapping: MODE#3: pull up */
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
 			/* AR8035 pin strapping: MODE#0: pull down */
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
 			/* GPIO16 -> AR8035 25MHz */
 			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 			/* RGMII_nRST */
diff --git a/src/arm/imx6q-nitrogen6_som2.dts b/src/arm/imx6q-nitrogen6_som2.dts
new file mode 100644
index 000000000000..cf4feefe02c5
--- /dev/null
+++ b/src/arm/imx6q-nitrogen6_som2.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen6_som2.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Quad Nitrogen6_SOM2 Board";
+	compatible = "boundary,imx6q-nitrogen6_som2", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/src/arm/imx6q-novena.dts b/src/arm/imx6q-novena.dts
index 5acd0c63b33b..758bca96786f 100644
--- a/src/arm/imx6q-novena.dts
+++ b/src/arm/imx6q-novena.dts
@@ -451,6 +451,10 @@
 	status = "okay";
 };
 
+&pwm1 {
+	status = "okay";
+};
+
 &sata {
 	target-supply = <&reg_sata>;
 	fsl,transmit-level-mV = <1025>;
@@ -549,12 +553,12 @@
 			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b028
 			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b028
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 			/* Ethernet reset */
 			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b1
diff --git a/src/arm/imx6q-phytec-pbab01.dts b/src/arm/imx6q-phytec-pbab01.dts
index c139ac0ebe15..1f4771304da8 100644
--- a/src/arm/imx6q-phytec-pbab01.dts
+++ b/src/arm/imx6q-phytec-pbab01.dts
@@ -23,5 +23,5 @@
 };
 
 &sata {
-        status = "okay";
+	status = "okay";
 };
diff --git a/src/arm/imx6q-sbc6x.dts b/src/arm/imx6q-sbc6x.dts
index 86cf09364664..255733063ea4 100644
--- a/src/arm/imx6q-sbc6x.dts
+++ b/src/arm/imx6q-sbc6x.dts
@@ -31,19 +31,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 			>;
 		};
diff --git a/src/arm/imx6q-tbs2910.dts b/src/arm/imx6q-tbs2910.dts
index 1926b1348a62..06f492e17ca7 100644
--- a/src/arm/imx6q-tbs2910.dts
+++ b/src/arm/imx6q-tbs2910.dts
@@ -191,7 +191,7 @@
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -284,19 +284,19 @@
 		fsl,pins = <
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
 			MX6QDL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
 			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b059
 		>;
diff --git a/src/arm/imx6q-ts4900.dts b/src/arm/imx6q-ts4900.dts
new file mode 100644
index 000000000000..9b81ebc8b0d4
--- /dev/null
+++ b/src/arm/imx6q-ts4900.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2015 Technologic Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-ts4900.dtsi"
+
+/ {
+	model = "Technologic Systems i.MX6 Quad TS-4900 (Default Device Tree)";
+	compatible = "technologic,imx6q-ts4900", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/src/arm/imx6q-tx6q-1010-comtft.dts b/src/arm/imx6q-tx6q-1010-comtft.dts
index 65e95ae7509a..71746edc2ee9 100644
--- a/src/arm/imx6q-tx6q-1010-comtft.dts
+++ b/src/arm/imx6q-tx6q-1010-comtft.dts
@@ -105,7 +105,7 @@
 				pixelclk-active = <1>;
 			};
 		};
-        };
+	};
 };
 
 &can1 {
diff --git a/src/arm/imx6q-tx6q-1010.dts b/src/arm/imx6q-tx6q-1010.dts
index 20cd0e7b3e21..f9cd21a41a79 100644
--- a/src/arm/imx6q-tx6q-1010.dts
+++ b/src/arm/imx6q-tx6q-1010.dts
@@ -199,7 +199,7 @@
 				pixelclk-active = <0>;
 			};
 		};
-        };
+	};
 };
 
 &ipu1_di0_disp0 {
diff --git a/src/arm/imx6q-tx6q-1020-comtft.dts b/src/arm/imx6q-tx6q-1020-comtft.dts
index 9ed243b704ff..959ff3fb7304 100644
--- a/src/arm/imx6q-tx6q-1020-comtft.dts
+++ b/src/arm/imx6q-tx6q-1020-comtft.dts
@@ -105,7 +105,7 @@
 				pixelclk-active = <1>;
 			};
 		};
-        };
+	};
 };
 
 &can1 {
diff --git a/src/arm/imx6q-tx6q-1020.dts b/src/arm/imx6q-tx6q-1020.dts
index 347b531d3763..b49133d25d80 100644
--- a/src/arm/imx6q-tx6q-1020.dts
+++ b/src/arm/imx6q-tx6q-1020.dts
@@ -199,7 +199,7 @@
 				pixelclk-active = <0>;
 			};
 		};
-        };
+	};
 };
 
 &ds1339 {
diff --git a/src/arm/imx6q-utilite-pro.dts b/src/arm/imx6q-utilite-pro.dts
new file mode 100644
index 000000000000..22009947cebc
--- /dev/null
+++ b/src/arm/imx6q-utilite-pro.dts
@@ -0,0 +1,226 @@
+/*
+ * Copyright 2013 CompuLab Ltd.
+ * Copyright 2016 Christopher Spinrath
+ *
+ * Based on the devicetree distributed with the vendor kernel for the
+ * Utilite Pro:
+ *	Copyright 2013 CompuLab Ltd.
+ *	Author: Valentin Raevsky <valentin@compulab.co.il>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+#include "imx6q-cm-fx6.dts"
+
+/ {
+	model = "CompuLab Utilite Pro";
+	compatible = "compulab,utilite-pro", "compulab,cm-fx6", "fsl,imx6q";
+
+	aliases {
+		ethernet1 = &eth1;
+		rtc0 = &em3027;
+		rtc1 = &snvs_rtc;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mux-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c1>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "at24,24c02";
+				reg = <0x50>;
+				pagesize = <16>;
+			};
+
+			em3027: rtc@56 {
+				compatible = "emmicro,em3027";
+				reg = <0x56>;
+			};
+		};
+
+		i2c_dvi_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1mux: i2c1muxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b0b1
+			MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170B9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100B9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170B9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170B9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x170B9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170B9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170F9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100F9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170F9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170F9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x170F9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170F9
+		>;
+	};
+};
+
+&pcie {
+	pcie@0,0 {
+		reg = <0x000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		/* non-removable i211 ethernet card */
+		eth1: intel,i211@pcie0,0 {
+			reg = <0x010000 0 0 0 0>;
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	no-1-8-v;
+	broken-cd;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/src/arm/imx6q.dtsi b/src/arm/imx6q.dtsi
index c30c8368cae0..e9a5d0b8c7b0 100644
--- a/src/arm/imx6q.dtsi
+++ b/src/arm/imx6q.dtsi
@@ -209,6 +209,43 @@
 	};
 };
 
+&gpio1 {
+	gpio-ranges = <&iomuxc  0 136  2>, <&iomuxc  2 141 1>, <&iomuxc  3 139 1>,
+		      <&iomuxc  4 142  2>, <&iomuxc  6 140 1>, <&iomuxc  7 144 2>,
+		      <&iomuxc  9 138  1>, <&iomuxc 10 213 3>, <&iomuxc 13  20 1>,
+		      <&iomuxc 14  19  1>, <&iomuxc 15  21 1>, <&iomuxc 16 208 1>,
+		      <&iomuxc 17 207  1>, <&iomuxc 18 210 3>, <&iomuxc 21 209 1>,
+		      <&iomuxc 22 116 10>;
+};
+
+&gpio2 {
+	gpio-ranges = <&iomuxc  0 191 16>, <&iomuxc 16 55 14>, <&iomuxc 30 35 1>,
+		      <&iomuxc 31  44  1>;
+};
+
+&gpio3 {
+	gpio-ranges = <&iomuxc 0 69 16>, <&iomuxc 16 36 8>, <&iomuxc 24 45 8>;
+};
+
+&gpio4 {
+	gpio-ranges = <&iomuxc 5 149 1>, <&iomuxc 6 126 10>, <&iomuxc 16 87 16>;
+};
+
+&gpio5 {
+	gpio-ranges = <&iomuxc 0  85  1>, <&iomuxc  2  34  1>, <&iomuxc 4 53 1>,
+		      <&iomuxc 5 103 13>, <&iomuxc 18 150 14>;
+};
+
+&gpio6 {
+	gpio-ranges = <&iomuxc  0 164 6>, <&iomuxc  6  54 1>, <&iomuxc  7 181  5>,
+		      <&iomuxc 14 186 3>, <&iomuxc 17 170 2>, <&iomuxc 19  22 12>,
+		      <&iomuxc 31  86 1>;
+};
+
+&gpio7 {
+	gpio-ranges = <&iomuxc 0 172 9>, <&iomuxc 9 189 2>, <&iomuxc 11 146 3>;
+};
+
 &hdmi {
 	compatible = "fsl,imx6q-hdmi";
 
diff --git a/src/arm/imx6qdl-apalis.dtsi b/src/arm/imx6qdl-apalis.dtsi
index 922b1dd06fda..8c8a049eb3d0 100644
--- a/src/arm/imx6qdl-apalis.dtsi
+++ b/src/arm/imx6qdl-apalis.dtsi
@@ -49,7 +49,10 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
 		pwms = <&pwm4 0 5000000>;
+		enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
 	};
 
@@ -423,7 +426,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
 	fsl,dte-mode;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "disabled";
 };
 
@@ -431,7 +434,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2_dte>;
 	fsl,dte-mode;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "disabled";
 };
 
@@ -586,19 +589,19 @@
 		fsl,pins = <
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 			/* Ethernet PHY reset */
 			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
 			/* Ethernet PHY interrupt */
@@ -620,6 +623,12 @@
 		>;
 	};
 
+	pinctrl_gpio_bl_on: gpioblon {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0
+		>;
+	};
+
 	pinctrl_gpio_keys: gpio1io04grp {
 		fsl,pins = <
 			/* Power button */
diff --git a/src/arm/imx6qdl-apf6dev.dtsi b/src/arm/imx6qdl-apf6dev.dtsi
index 865c9a264a43..5e7792d6bf58 100644
--- a/src/arm/imx6qdl-apf6dev.dtsi
+++ b/src/arm/imx6qdl-apf6dev.dtsi
@@ -254,7 +254,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3 &pinctrl_gsm>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -347,13 +347,13 @@
 			fsl,pins = <
 				MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x100b1
 				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x100b1
-				MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 	0x100b1
-				MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 	0x100b1
-				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 	0x100b1
-				MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 	0x100b1
-				MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 	0x100b1
-				MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 	0x100b1
-				MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21  	0x100b1
+				MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x100b1
+				MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x100b1
+				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x100b1
+				MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x100b1
+				MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x100b1
+				MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x100b1
+				MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x100b1
 			>;
 		};
 
diff --git a/src/arm/imx6qdl-aristainetos.dtsi b/src/arm/imx6qdl-aristainetos.dtsi
index ecbc6eba6a2c..54f4f0193f2b 100644
--- a/src/arm/imx6qdl-aristainetos.dtsi
+++ b/src/arm/imx6qdl-aristainetos.dtsi
@@ -143,14 +143,14 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart5>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/src/arm/imx6qdl-aristainetos2.dtsi b/src/arm/imx6qdl-aristainetos2.dtsi
index 7d81100e7d47..7fff02c406f2 100644
--- a/src/arm/imx6qdl-aristainetos2.dtsi
+++ b/src/arm/imx6qdl-aristainetos2.dtsi
@@ -351,7 +351,7 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -364,7 +364,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/src/arm/imx6qdl-colibri.dtsi b/src/arm/imx6qdl-colibri.dtsi
new file mode 100644
index 000000000000..e6faa653f91a
--- /dev/null
+++ b/src/arm/imx6qdl-colibri.dtsi
@@ -0,0 +1,890 @@
+/*
+ * Copyright 2014-2016 Toradex AG
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Toradex Colibri iMX6DL/S Module";
+	compatible = "toradex,colibri_imx6dl", "fsl,imx6dl";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
+		pwms = <&pwm3 0 5000000>;
+		enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */
+		status = "disabled";
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
+		regulator-name = "usb_host_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */
+		status = "disabled";
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6dl-colibri-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HP_OUT",
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias";
+		mux-int-port = <1>;
+		mux-ext-port = <5>;
+	};
+
+	/* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */
+	sound_spdif: sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+		spdif-out;
+		status = "disabled";
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux &pinctrl_mic_gnd>;
+	status = "okay";
+};
+
+/* Optional on SODIMM 55/63 */
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+/* Optional on SODIMM 178/188 */
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "disabled";
+};
+
+/* Colibri SSP */
+&ecspi4 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	status = "disabled";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_ddc>;
+	status = "disabled";
+};
+
+/*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vgen1: unused */
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vgen3: unused */
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	/* STMPE811 touch screen controller */
+	stmpe811@41 {
+		compatible = "st,stmpe811";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_int>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x41>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio6>;
+		interrupt-controller;
+		id = <0>;
+		blocks = <0x5>;
+		irq-trigger = <0x1>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			reg = <0>;
+			/* 3.25 MHz ADC clock speed */
+			st,adc-freq = <1>;
+			/* 8 sample average control */
+			st,ave-ctrl = <3>;
+			/* 7 length fractional part in z */
+			st,fraction-z = <7>;
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			/* 12-bit ADC */
+			st,mod-12b = <1>;
+			/* internal ADC reference */
+			st,ref-sel = <0>;
+			/* ADC converstion time: 80 clocks */
+			st,sample-time = <4>;
+			/* 1 ms panel driver settling time */
+			st,settling = <3>;
+			/* 5 ms touch detect interrupt delay */
+			st,touch-det-delay = <5>;
+		};
+	};
+};
+
+/*
+ * I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
+ */
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "recovery";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_recovery>;
+	scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+	status = "disabled";
+};
+
+/* Colibri PWM<B> */
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+/* Colibri PWM<D> */
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+/* Colibri PWM<A> */
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "disabled";
+};
+
+/* Colibri PWM<C> */
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "disabled";
+};
+
+/* Optional S/PDIF out on SODIMM 137 */
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "disabled";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
+	fsl,dte-mode;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+/* Colibri UART_B */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_dte>;
+	fsl,dte-mode;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+/* Colibri UART_C */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_dte>;
+	fsl,dte-mode;
+	status = "disabled";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	disable-over-current;
+	dr_mode = "peripheral";
+	status = "disabled";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	vqmmc-supply = <&reg_3p3v>;
+	bus-width = <4>;
+	voltage-ranges = <3300 3300>;
+	status = "disabled";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vqmmc-supply = <&reg_3p3v>;
+	bus-width = <8>;
+	voltage-ranges = <3300 3300>;
+	non-removable;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim_sram  &pinctrl_weim_cs0
+		     &pinctrl_weim_cs1   &pinctrl_weim_cs2
+		     &pinctrl_weim_rdnwr &pinctrl_weim_npwe>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__AUD5_TXC	0x130b0
+			MX6QDL_PAD_KEY_ROW0__AUD5_TXD	0x130b0
+			MX6QDL_PAD_KEY_COL1__AUD5_TXFS	0x130b0
+			MX6QDL_PAD_KEY_ROW1__AUD5_RXD	0x130b0
+			/* SGTL5000 sys_mclk */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x000b0
+		>;
+	};
+
+	pinctrl_cam_mclk: cammclkgrp {
+		fsl,pins = <
+			/* Parallel Camera CAM sys_mclk */
+			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2	0x00b0
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO	0x100b1
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI	0x100b1
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+			/* SPI CS */
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK     ((1<<30) | 0x1b0b0)
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_bl_on: gpioblon {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeys {
+		fsl,pins = <
+			/* Power button */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi_ddc: hdmiddcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_recovery: i2c3recoverygrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp { /* Parallel Camera */
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12	0xb0b1
+			MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13	0xb0b1
+			MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14	0xb0b1
+			MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15	0xb0b1
+			MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16	0xb0b1
+			MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17	0xb0b1
+			MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18	0xb0b1
+			MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19	0xb0b1
+			MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK	0xb0b1
+			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC	0xb0b1
+			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC	0xb0b1
+			/* Disable PWM pins on camera interface */
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x40
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01		0x40
+		>;
+	};
+
+	pinctrl_ipu1_lcdif: ipu1lcdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0xa1
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0xa1
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0xa1
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0xa1
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0xa1
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0xa1
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0xa1
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0xa1
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0xa1
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0xa1
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0xa1
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0xa1
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0xa1
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0xa1
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0xa1
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0xa1
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0xa1
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0xa1
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0xa1
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0xa1
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0xa1
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0xa1
+		>;
+	};
+
+	pinctrl_mic_gnd: gpiomicgnd {
+		fsl,pins = <
+			/* Controls Mic GND, PU or '1' pull Mic GND to GND */
+			MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0
+		>;
+	};
+
+	pinctrl_mmc_cd: gpiommccd {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x80000000
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17	0x00040
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b1
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16	0x00040
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
+		fsl,pins = <
+			/* USBH_EN */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31	0x0f058
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
+		>;
+	};
+
+	pinctrl_touch_int: gpiotouchintgrp {
+		fsl,pins = <
+			/* STMPE811 interrupt */
+			MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1_dce: uart1dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart1_dte: uart1dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_RTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
+		>;
+	};
+
+	/* Additional DTR, DSR, DCD */
+	pinctrl_uart1_ctrl: uart1ctrlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
+			MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2_dte: uart2dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3_dte: uart3dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_CMD__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbc_det: usbcdetgrp {
+		fsl,pins = <
+			/* USBC_DET */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+			/* USBC_DET_EN */
+			MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26	0x0f058
+			/* USBC_DET_OVERWRITE */
+			MX6QDL_PAD_RGMII_RXC__GPIO6_IO30	0x0f058
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
+			/* eMMC reset */
+			MX6QDL_PAD_SD3_RST__SD3_RESET	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3100mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x170b9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x170b9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x170b9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x170b9
+			/* eMMC reset */
+			MX6QDL_PAD_SD3_RST__SD3_RESET	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3200mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x170f9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x170f9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x170f9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x170f9
+			/* eMMC reset */
+			MX6QDL_PAD_SD3_RST__SD3_RESET	0x170f9
+		>;
+	};
+
+	pinctrl_weim_cs0: weimcs0grp {
+		fsl,pins = <
+			/* nEXT_CS0 */
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B	0xb0b1
+		>;
+	};
+
+	pinctrl_weim_cs1: weimcs1grp {
+		fsl,pins = <
+			/* nEXT_CS1 */
+			MX6QDL_PAD_EIM_CS1__EIM_CS1_B	0xb0b1
+		>;
+	};
+
+	pinctrl_weim_cs2: weimcs2grp {
+		fsl,pins = <
+			/* nEXT_CS2 */
+			MX6QDL_PAD_SD2_DAT1__EIM_CS2_B	0xb0b1
+		>;
+	};
+
+	pinctrl_weim_sram: weimsramgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
+			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
+			/* Data */
+			MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00	0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__EIM_DATA02	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__EIM_DATA03	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__EIM_DATA04	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__EIM_DATA05	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__EIM_DATA06	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__EIM_DATA07	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__EIM_DATA08	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__EIM_DATA09	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__EIM_DATA10	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__EIM_DATA11	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__EIM_DATA12	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__EIM_DATA13	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__EIM_DATA14	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__EIM_DATA15	0x1b0b0
+			/* Address */
+			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
+			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
+		>;
+	};
+
+	pinctrl_weim_rdnwr: weimrdnwr {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CLK__GPIO1_IO10		0x0040
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23	0x130b0
+		>;
+	};
+
+	pinctrl_weim_npwe: weimnpwe {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x0040
+			MX6QDL_PAD_RGMII_TD2__GPIO6_IO22	0x130b0
+		>;
+	};
+
+	/* ADDRESS[16:18] [25] used as GPIO */
+	pinctrl_weim_gpio_1: weimgpio-1 {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+		>;
+	};
+
+	/* ADDRESS[19:24] used as GPIO */
+	pinctrl_weim_gpio_2: weimgpio-2 {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+		>;
+	};
+
+	/* DATA[16:31] used as GPIO */
+	pinctrl_weim_gpio_3: weimgpio-3 {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b0
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b0
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x1b0b0
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x1b0b0
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x1b0b0
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b0
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
+	/* DQM[0:3] used as GPIO */
+	pinctrl_weim_gpio_4: weimgpio-4 {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
+			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+		>;
+	};
+
+	/* RDY used as GPIO */
+	pinctrl_weim_gpio_5: weimgpio-5 {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b0
+		>;
+	};
+
+	/* ADDRESS[16] DATA[30] used as GPIO */
+	pinctrl_weim_gpio_6: weimgpio-6 {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
+		>;
+	};
+};
diff --git a/src/arm/imx6qdl-dfi-fs700-m60.dtsi b/src/arm/imx6qdl-dfi-fs700-m60.dtsi
index da1341d47b14..b2c083d57598 100644
--- a/src/arm/imx6qdl-dfi-fs700-m60.dtsi
+++ b/src/arm/imx6qdl-dfi-fs700-m60.dtsi
@@ -67,18 +67,18 @@
 
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
diff --git a/src/arm/imx6qdl-gw51xx.dtsi b/src/arm/imx6qdl-gw51xx.dtsi
index 9d7ab6cdc9a6..afec2c7628ef 100644
--- a/src/arm/imx6qdl-gw51xx.dtsi
+++ b/src/arm/imx6qdl-gw51xx.dtsi
@@ -228,22 +228,28 @@
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
 	imx6qdl-gw51xx {
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
@@ -364,5 +370,11 @@
 				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
 			>;
 		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+			>;
+		};
 	};
 };
diff --git a/src/arm/imx6qdl-gw52xx.dtsi b/src/arm/imx6qdl-gw52xx.dtsi
index 7191b84770b9..54aca3a07ce4 100644
--- a/src/arm/imx6qdl-gw52xx.dtsi
+++ b/src/arm/imx6qdl-gw52xx.dtsi
@@ -153,9 +153,9 @@
 
 &clks {
 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 };
 
 &ecspi3 {
@@ -315,6 +315,8 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -353,6 +355,12 @@
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
 	imx6qdl-gw52xx {
 		pinctrl_audmux: audmuxgrp {
@@ -376,18 +384,18 @@
 
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
@@ -487,6 +495,7 @@
 			fsl,pins = <
 				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
 				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
 			>;
 		};
 
@@ -549,5 +558,11 @@
 				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
 			>;
 		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+			>;
+		};
 	};
 };
diff --git a/src/arm/imx6qdl-gw53xx.dtsi b/src/arm/imx6qdl-gw53xx.dtsi
index 40d06b09deba..88e5cb3b6be9 100644
--- a/src/arm/imx6qdl-gw53xx.dtsi
+++ b/src/arm/imx6qdl-gw53xx.dtsi
@@ -154,9 +154,9 @@
 
 &clks {
 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 };
 
 &fec {
@@ -312,6 +312,8 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -351,6 +353,12 @@
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
 	imx6qdl-gw53xx {
 		pinctrl_audmux: audmuxgrp {
@@ -365,18 +373,18 @@
 
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
@@ -476,6 +484,7 @@
 			fsl,pins = <
 				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
 				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
 			>;
 		};
 
@@ -539,5 +548,11 @@
 				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
 			>;
 		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+			>;
+		};
 	};
 };
diff --git a/src/arm/imx6qdl-gw54xx.dtsi b/src/arm/imx6qdl-gw54xx.dtsi
index d6dbe2a88ee6..1753ab720b0b 100644
--- a/src/arm/imx6qdl-gw54xx.dtsi
+++ b/src/arm/imx6qdl-gw54xx.dtsi
@@ -144,9 +144,9 @@
 
 &clks {
 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 };
 
 &fec {
@@ -414,6 +414,8 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -453,6 +455,17 @@
 	status = "okay";
 };
 
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
 &iomuxc {
 	imx6qdl-gw54xx {
 		pinctrl_audmux: audmuxgrp {
@@ -467,18 +480,18 @@
 
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
@@ -592,6 +605,7 @@
 			fsl,pins = <
 				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
 				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
 			>;
 		};
 
@@ -654,5 +668,11 @@
 				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
 			>;
 		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__WDOG2_B		0x1b0b0
+			>;
+		};
 	};
 };
diff --git a/src/arm/imx6qdl-gw551x.dtsi b/src/arm/imx6qdl-gw551x.dtsi
index 118bea524dab..4b9fef834822 100644
--- a/src/arm/imx6qdl-gw551x.dtsi
+++ b/src/arm/imx6qdl-gw551x.dtsi
@@ -239,6 +239,12 @@
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
 	imx6qdl-gw51xx {
 		pinctrl_flexcan1: flexcan1grp {
@@ -333,5 +339,11 @@
 				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
 			>;
 		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+			>;
+		};
 	};
 };
diff --git a/src/arm/imx6qdl-gw552x.dtsi b/src/arm/imx6qdl-gw552x.dtsi
index f27f184558fb..ee83161f674b 100644
--- a/src/arm/imx6qdl-gw552x.dtsi
+++ b/src/arm/imx6qdl-gw552x.dtsi
@@ -197,6 +197,12 @@
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
 	imx6qdl-gw552x {
 		pinctrl_gpio_leds: gpioledsgrp {
@@ -285,6 +291,12 @@
 				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
 				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
 			>;
-                };
+		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+			>;
+		};
 	};
 };
diff --git a/src/arm/imx6qdl-gw553x.dtsi b/src/arm/imx6qdl-gw553x.dtsi
new file mode 100644
index 000000000000..86cec0527f73
--- /dev/null
+++ b/src/arm/imx6qdl-gw553x.dtsi
@@ -0,0 +1,433 @@
+/*
+ * Copyright 2016 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory {
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P0V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gpio: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x4001b0b0 /* PCIESKT_WDIS# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/src/arm/imx6qdl-icore-rqs.dtsi b/src/arm/imx6qdl-icore-rqs.dtsi
index f8d945a56525..d5c3aa88adbe 100644
--- a/src/arm/imx6qdl-icore-rqs.dtsi
+++ b/src/arm/imx6qdl-icore-rqs.dtsi
@@ -254,19 +254,19 @@
 		fsl,pins = <
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
 			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN     0x1b0b0
 		>;
 	};
diff --git a/src/arm/imx6qdl-icore.dtsi b/src/arm/imx6qdl-icore.dtsi
new file mode 100644
index 000000000000..023839a02dd0
--- /dev/null
+++ b/src/arm/imx6qdl-icore.dtsi
@@ -0,0 +1,265 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	rmii_clk: clock-rmii-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;  /* 25MHz for example */
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b0b1
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b020
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b020
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpmi-nand {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL  0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x130b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17070
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10070
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17070
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17070
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17070
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070
+		>;
+	};
+};
diff --git a/src/arm/imx6qdl-microsom.dtsi b/src/arm/imx6qdl-microsom.dtsi
index 86460e46d055..3d62401dbd7f 100644
--- a/src/arm/imx6qdl-microsom.dtsi
+++ b/src/arm/imx6qdl-microsom.dtsi
@@ -143,7 +143,7 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/src/arm/imx6qdl-nit6xlite.dtsi b/src/arm/imx6qdl-nit6xlite.dtsi
index e456b5cc1b03..63acd54f5278 100644
--- a/src/arm/imx6qdl-nit6xlite.dtsi
+++ b/src/arm/imx6qdl-nit6xlite.dtsi
@@ -97,15 +97,6 @@
 		};
 	};
 
-	bt_rfkill {
-		compatible = "rfkill-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_bt_rfkill>;
-		gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
-		name = "bt_rfkill";
-		type = <2>;
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -160,7 +151,7 @@
 		};
 	};
 
-	backlight_lcd {
+	backlight-lcd {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -169,7 +160,7 @@
 		status = "okay";
 	};
 
-	backlight_lvds0: backlight_lvds0 {
+	backlight_lvds0: backlight-lvds0 {
 		compatible = "pwm-backlight";
 		pwms = <&pwm4 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -178,7 +169,7 @@
 		status = "okay";
 	};
 
-	panel_lvds0 {
+	panel-lvds0 {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds0>;
 
@@ -250,6 +241,7 @@
 	txd3-skew-ps = <0>;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
 };
 
@@ -327,19 +319,6 @@
 			>;
 		};
 
-		pinctrl_bt_rfkill: bt_rfkillgrp {
-			fsl,pins = <
-				/* BT wake */
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
-				/* BT reset */
-				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x0b0b0
-				/* BT reg en */
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0
-				/* BT host wake irq */
-				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x100b0
-			>;
-		};
-
 		pinctrl_ecspi1: ecspi1grp {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
@@ -360,12 +339,12 @@
 				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
 				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				/* Phy reset */
 				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
 				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
@@ -373,7 +352,7 @@
 			>;
 		};
 
-		pinctrl_gpio_keys: gpio_keysgrp {
+		pinctrl_gpio_keys: gpio-keysgrp {
 			fsl,pins = <
 				/* Home Button: J14 pin 5 */
 				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
@@ -456,7 +435,7 @@
 			>;
 		};
 
-		pinctrl_wlan_vmmc: wlan_vmmcgrp {
+		pinctrl_wlan_vmmc: wlan-vmmcgrp {
 			fsl,pins = <
 				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b0
 			>;
@@ -591,7 +570,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/src/arm/imx6qdl-nitrogen6_max.dtsi b/src/arm/imx6qdl-nitrogen6_max.dtsi
index 657da6b6ccd2..47ba97229a48 100644
--- a/src/arm/imx6qdl-nitrogen6_max.dtsi
+++ b/src/arm/imx6qdl-nitrogen6_max.dtsi
@@ -229,7 +229,7 @@
 		};
 	};
 
-	backlight_lcd: backlight_lcd {
+	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -238,7 +238,7 @@
 		status = "okay";
 	};
 
-	backlight_lvds0: backlight_lvds0 {
+	backlight_lvds0: backlight-lvds0 {
 		compatible = "pwm-backlight";
 		pwms = <&pwm4 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -247,7 +247,7 @@
 		status = "okay";
 	};
 
-	backlight_lvds1: backlight_lvds1 {
+	backlight_lvds1: backlight-lvds1 {
 		compatible = "pwm-backlight";
 		pwms = <&pwm2 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -282,7 +282,7 @@
 		};
 	};
 
-	panel_lcd {
+	panel-lcd {
 		compatible = "okaya,rs800480t-7x0gp";
 		backlight = <&backlight_lcd>;
 
@@ -293,7 +293,7 @@
 		};
 	};
 
-	panel_lvds0 {
+	panel-lvds0 {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds0>;
 
@@ -304,7 +304,7 @@
 		};
 	};
 
-	panel_lvds1 {
+	panel-lvds1 {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds1>;
 
@@ -319,8 +319,6 @@
 		compatible = "fsl,imx6q-nitrogen6_max-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
 		model = "imx6q-nitrogen6_max-sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sgtl5000>;
 		ssi-controller = <&ssi1>;
 		audio-codec = <&codec>;
 		audio-routing =
@@ -385,6 +383,7 @@
 	txd3-skew-ps = <0>;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
 };
 
@@ -401,6 +400,8 @@
 
 	codec: sgtl5000@0a {
 		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
 		reg = <0x0a>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_2p5v>;
@@ -446,7 +447,7 @@
 };
 
 &iomuxc {
-	imx6q-nitrogen6_max {
+	imx6q-nitrogen6-max {
 		pinctrl_audmux: audmuxgrp {
 			fsl,pins = <
 				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
@@ -483,19 +484,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				/* Phy reset */
 				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
 				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
@@ -503,7 +504,7 @@
 			>;
 		};
 
-		pinctrl_gpio_keys: gpio_keysgrp {
+		pinctrl_gpio_keys: gpio-keysgrp {
 			fsl,pins = <
 				/* Power Button */
 				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
@@ -719,7 +720,7 @@
 			>;
 		};
 
-		pinctrl_wlan_vmmc: wlan_vmmcgrp {
+		pinctrl_wlan_vmmc: wlan-vmmcgrp {
 			fsl,pins = <
 				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
 				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
diff --git a/src/arm/imx6qdl-nitrogen6_som2.dtsi b/src/arm/imx6qdl-nitrogen6_som2.dtsi
new file mode 100644
index 000000000000..31d4cc62dbc7
--- /dev/null
+++ b/src/arm/imx6qdl-nitrogen6_som2.dtsi
@@ -0,0 +1,770 @@
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds1: backlight-lvds1 {
+		compatible = "gpio-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_lvds1>;
+		gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		default-on;
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		menu {
+			label = "Menu";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	lcd_display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel-lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds0>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	panel-lvds1 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds1>;
+
+		port {
+			panel_in_lvds1: endpoint {
+				remote-endpoint = <&lvds1_out>;
+			};
+		};
+	};
+
+	reg_1p8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_can_xcvr: regulator-can-xcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_xcvr>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_wlan_vmmc: regulator-wlan-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan_vmmc>;
+		regulator-name = "reg_wlan_vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-nitrogen6_som2-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-nitrogen6_som2-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	rtc@68 {
+		compatible = "st,rv4162";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rv4162>;
+		reg = <0x68>;
+		interrupts-extended = <&gpio6 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_backlight_lvds1: backlight-lvds1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x0b0b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_can_xcvr: can-xcvrgrp {
+		fsl,pins = <
+			/* Flexcan XCVR enable */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x0b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x130b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x130b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x030b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			/* Power Button */
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+			/* Menu Button */
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+			/* Home Button */
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+			/* Back Button */
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+			/* Volume Up Button */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+			/* Volume Down Button */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c3mux: i2c3muxgrp {
+		fsl,pins = <
+			/* PCIe I2C enable */
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25	0x000b0
+		>;
+	};
+
+	pinctrl_j15: j15grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			/* PCIe reset */
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31	0x030b0
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04	0x030b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x030b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT	0x030b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT	0x030b1
+		>;
+	};
+
+	pinctrl_rv4162: rv4162grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x1b0b0
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x130b0
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x130b0
+			MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24	0x130b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x030b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17071
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17071
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17071
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17071
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10071
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17071
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17071
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17071
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17071
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17071
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_wlan_vmmc: wlan-vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x100b0
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x030b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x030b0
+			MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in_lvds1>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wlan_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&reg_1p8v>;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/src/arm/imx6qdl-nitrogen6x.dtsi b/src/arm/imx6qdl-nitrogen6x.dtsi
index 73915db704a0..26d060484728 100644
--- a/src/arm/imx6qdl-nitrogen6x.dtsi
+++ b/src/arm/imx6qdl-nitrogen6x.dtsi
@@ -167,7 +167,7 @@
 		mux-ext-port = <3>;
 	};
 
-	backlight_lcd: backlight_lcd {
+	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -176,7 +176,7 @@
 		status = "okay";
 	};
 
-	backlight_lvds: backlight_lvds {
+	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
 		pwms = <&pwm4 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -211,7 +211,7 @@
 		};
 	};
 
-	lcd_panel {
+	panel-lcd {
 		compatible = "okaya,rs800480t-7x0gp";
 		backlight = <&backlight_lcd>;
 
@@ -222,7 +222,7 @@
 		};
 	};
 
-	panel {
+	panel-lvds0 {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds>;
 
@@ -287,6 +287,7 @@
 	txd3-skew-ps = <0>;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
 };
 
@@ -393,26 +394,26 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				/* Phy reset */
 				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x000b0
 				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
 		};
 
-		pinctrl_gpio_keys: gpio_keysgrp {
+		pinctrl_gpio_keys: gpio-keysgrp {
 			fsl,pins = <
 				/* Power Button */
 				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
@@ -532,7 +533,6 @@
 				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17071
 				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17071
 				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17071
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
 			>;
 		};
 
@@ -560,7 +560,7 @@
 			>;
 		};
 
-		pinctrl_wlan_vmmc: wlan_vmmcgrp {
+		pinctrl_wlan_vmmc: wlan-vmmcgrp {
 			fsl,pins = <
 				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
 				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
diff --git a/src/arm/imx6qdl-phytec-pfla02.dtsi b/src/arm/imx6qdl-phytec-pfla02.dtsi
index d6d98d426384..e9801a26f3b4 100644
--- a/src/arm/imx6qdl-phytec-pfla02.dtsi
+++ b/src/arm/imx6qdl-phytec-pfla02.dtsi
@@ -231,19 +231,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
 			>;
 		};
@@ -379,6 +379,18 @@
 	status = "disabled";
 };
 
+&reg_arm {
+	vin-supply = <&vddcore_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&vddsoc_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&vddsoc_reg>;
+};
+
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
@@ -415,10 +427,10 @@
 };
 
 &usdhc3 {
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_usdhc3
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3
 		     &pinctrl_usdhc3_cdwp>;
 	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-        status = "disabled";
+	status = "disabled";
 };
diff --git a/src/arm/imx6qdl-rex.dtsi b/src/arm/imx6qdl-rex.dtsi
index cacf5933707d..17704a5c1bcb 100644
--- a/src/arm/imx6qdl-rex.dtsi
+++ b/src/arm/imx6qdl-rex.dtsi
@@ -196,19 +196,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 				/* Phy reset */
 				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
diff --git a/src/arm/imx6qdl-sabreauto.dtsi b/src/arm/imx6qdl-sabreauto.dtsi
index d354d406954d..52390ba83e81 100644
--- a/src/arm/imx6qdl-sabreauto.dtsi
+++ b/src/arm/imx6qdl-sabreauto.dtsi
@@ -155,6 +155,7 @@
 	phy-mode = "rgmii";
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
 };
 
@@ -282,7 +283,7 @@
 		VD-supply = <&reg_audio>;
 		VLS-supply = <&reg_audio>;
 		VLC-supply = <&reg_audio>;
-        };
+	};
 
 };
 
@@ -344,19 +345,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
 		};
@@ -612,8 +613,6 @@
 &weim {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
-	#address-cells = <2>;
-	#size-cells = <1>;
 	ranges = <0 0 0x08000000 0x08000000>;
 	status = "disabled"; /* pin conflict with SPI NOR */
 
diff --git a/src/arm/imx6qdl-sabrelite.dtsi b/src/arm/imx6qdl-sabrelite.dtsi
index c47fe6c79b36..1f9076e271e4 100644
--- a/src/arm/imx6qdl-sabrelite.dtsi
+++ b/src/arm/imx6qdl-sabrelite.dtsi
@@ -153,7 +153,7 @@
 		mux-ext-port = <4>;
 	};
 
-	backlight_lcd: backlight_lcd {
+	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -162,7 +162,7 @@
 		status = "okay";
 	};
 
-	backlight_lvds: backlight_lvds {
+	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
 		pwms = <&pwm4 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -197,7 +197,7 @@
 		};
 	};
 
-	lcd_panel {
+	panel-lcd {
 		compatible = "okaya,rs800480t-7x0gp";
 		backlight = <&backlight_lcd>;
 
@@ -208,7 +208,7 @@
 		};
 	};
 
-	panel {
+	panel-lvds0 {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds>;
 
@@ -273,6 +273,7 @@
 	txd3-skew-ps = <0>;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
 };
 
@@ -358,26 +359,26 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				/* Phy reset */
 				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x000b0
 				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
 		};
 
-		pinctrl_gpio_keys: gpio_keysgrp {
+		pinctrl_gpio_keys: gpio-keysgrp {
 			fsl,pins = <
 				/* Power Button */
 				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
diff --git a/src/arm/imx6qdl-sabresd.dtsi b/src/arm/imx6qdl-sabresd.dtsi
index 5248e7bd2b06..55ef53571fdd 100644
--- a/src/arm/imx6qdl-sabresd.dtsi
+++ b/src/arm/imx6qdl-sabresd.dtsi
@@ -129,8 +129,8 @@
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
 		red {
-		        gpios = <&gpio1 2 0>;
-		        default-state = "on";
+			gpios = <&gpio1 2 0>;
+			default-state = "on";
 		};
 	};
 
@@ -380,19 +380,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 			>;
 		};
@@ -501,6 +501,12 @@
 				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
 			>;
 		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__WDOG2_B		0x1b0b0
+			>;
+		};
 	};
 
 	gpio_leds {
@@ -533,7 +539,7 @@
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio7 12 0>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -596,3 +602,14 @@
 	no-1-8-v;
 	status = "okay";
 };
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/src/arm/imx6qdl-ts4900.dtsi b/src/arm/imx6qdl-ts4900.dtsi
new file mode 100644
index 000000000000..5c26b26e851a
--- /dev/null
+++ b/src/arm/imx6qdl-ts4900.dtsi
@@ -0,0 +1,481 @@
+/*
+ * Copyright 2015 Technologic Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		ethernet0 = &fec;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds1>;
+		compatible = "gpio-leds";
+
+		green-led {
+			label = "green-led";
+			gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		red-led {
+			label = "red-led";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	n25q064: flash@0 {
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&ecspi2 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	isl12022: rtc@6f {
+		compatible = "isil,isl12022";
+		reg = <0x6f>;
+	};
+
+	gpio8: gpio@28 {
+		compatible = "technologic,ts4900-gpio";
+		reg = <0x28>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		ngpio = <32>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x100b1 /* Onboard flash CS1# */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x100b1 /* Offboard CS0# */
+			MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02	0x100b1 /* FPGA CS1# */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1b0b1 /* FPGA_RESET# */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b1 /* FPGA_DONE */
+			MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M	0x10    /* FPGA 24MHZ */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b1 /* FPGA_IRQ */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b1
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b0b1 /* ETH_PHY_RESET */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b1
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b0b1 /* OFF_BD_RESET# */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b1 /* EN_USB_5V# */
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0x1b0b1 /* EN_LCD_3.3V */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* Audio CLK */
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b1 /* DIO_1 */
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b1 /* DIO_2 */
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b1 /* DIO_3 */
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x1b0b1 /* DIO_4 */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b1 /* DIO_5 */
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b1 /* DIO_7 */
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x1b0b1 /* DIO_8 */
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b1 /* DIO_9 */
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x1b0b1 /* DIO_0 */
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b1 /* DIO_6 */
+			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x1b0b1 /* CPU_DIO_A */
+			MX6QDL_PAD_SD4_DAT7__GPIO2_IO15		0x1b0b1 /* DIO_2 */
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x1b0b1 /* CPU_DIO_B */
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b1 /* BUS_ALE# */
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0x1b0b1 /* DIO_15 */
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b1 /* BUS_DIR */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23		0x1b0b1 /* BUS_CS# */
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b1 /* DIO_14 */
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18		0x1b0b1 /* DIO_16 */
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17		0x1b0b1 /* DIO_12 */
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b0b1 /* DIO_18 */
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x1b0b1 /* DIO_19 */
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b0b1 /* DIO_20 */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x1b0b1 /* BUS_BHE# */
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b1 /* DIO_13 */
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b1 /* EIM_WAIT# */
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b1 /* DIO_10 */
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b1 /* MUX_AD_00 */
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x1b0b1 /* MUX_AD_01 */
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x1b0b1 /* MUX_AD_02 */
+			MX6QDL_PAD_EIM_DA3__GPIO3_IO03		0x1b0b1 /* MUX_AD_03 */
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0x1b0b1 /* MUX_AD_04 */
+			MX6QDL_PAD_EIM_DA5__GPIO3_IO05		0x1b0b1 /* MUX_AD_05 */
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x1b0b1 /* MUX_AD_06 */
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0x1b0b1 /* MUX_AD_07 */
+			MX6QDL_PAD_EIM_DA8__GPIO3_IO08		0x1b0b1 /* MUX_AD_08 */
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x1b0b1 /* MUX_AD_09 */
+			MX6QDL_PAD_EIM_DA10__GPIO3_IO10		0x1b0b1 /* MUX_AD_10 */
+			MX6QDL_PAD_EIM_DA11__GPIO3_IO11		0x1b0b1 /* MUX_AD_11 */
+			MX6QDL_PAD_EIM_DA12__GPIO3_IO12		0x1b0b1 /* MUX_AD_12 */
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x1b0b1 /* MUX_AD_13 */
+			MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x1b0b1 /* MUX_AD_14 */
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x1b0b1 /* MUX_AD_15 */
+			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16	0x1b0b1 /* LCD_CLK */
+			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17	0x1b0b1 /* DE */
+			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b1 /* Hsync */
+			MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b1 /* Vsync */
+			MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
+		>;
+	};
+
+	pinctrl_leds1: leds1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1 /* RED_LED# */
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x1b0b1 /* GREEN_LED# */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_GPIO_8__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x17059 /* WIFI IRQ */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b1 /* EN_SD_POWER# */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+/* SD */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <4>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
diff --git a/src/arm/imx6qdl-tx6.dtsi b/src/arm/imx6qdl-tx6.dtsi
index 39b85aef93e1..2bf2e623ac1e 100644
--- a/src/arm/imx6qdl-tx6.dtsi
+++ b/src/arm/imx6qdl-tx6.dtsi
@@ -429,8 +429,8 @@
 	pinctrl_edt_ft5x06: edt-ft5x06grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0 /* Interrupt */
-			MX6QDL_PAD_EIM_A16__GPIO2_IO22  	0x1b0b0 /* Reset */
-			MX6QDL_PAD_EIM_A17__GPIO2_IO21  	0x1b0b0 /* Wake */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b0 /* Reset */
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b0b0 /* Wake */
 		>;
 	};
 
@@ -481,21 +481,21 @@
 
 	pinctrl_gpmi_nand: gpminandgrp {
 		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE    	0x0b0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE    	0x0b0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B  	0x0b0b1
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0x0b0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0x0b0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0x0b0b1
 			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0x0b000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B  	0x0b0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B     	0x0b0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B     	0x0b0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00  	0x0b0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01  	0x0b0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02  	0x0b0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03  	0x0b0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04  	0x0b0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05  	0x0b0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06  	0x0b0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07  	0x0b0b1
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0x0b0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0x0b0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0x0b0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0x0b0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0x0b0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0x0b0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0x0b0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0x0b0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0x0b0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0x0b0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0x0b0b1
 		>;
 	};
 
@@ -689,21 +689,21 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/src/arm/imx6qdl-udoo.dtsi b/src/arm/imx6qdl-udoo.dtsi
index 3bee2f910067..c96c91d83678 100644
--- a/src/arm/imx6qdl-udoo.dtsi
+++ b/src/arm/imx6qdl-udoo.dtsi
@@ -132,18 +132,18 @@
 	imx6q-udoo {
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
diff --git a/src/arm/imx6qdl-wandboard-revb1.dtsi b/src/arm/imx6qdl-wandboard-revb1.dtsi
index ef7fa62b9898..a32089132263 100644
--- a/src/arm/imx6qdl-wandboard-revb1.dtsi
+++ b/src/arm/imx6qdl-wandboard-revb1.dtsi
@@ -28,7 +28,7 @@
 				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x80000000	/* RGMII_nRST */
 				MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x80000000	/* BT_ON */
 				MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x80000000	/* BT_WAKE */
-				MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x80000000	/* BT_HOST_WAKE */				
+				MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x80000000	/* BT_HOST_WAKE */
 			>;
 		};
 	};
diff --git a/src/arm/imx6qdl-wandboard.dtsi b/src/arm/imx6qdl-wandboard.dtsi
index 8e7c40e114dd..82dc5744ae19 100644
--- a/src/arm/imx6qdl-wandboard.dtsi
+++ b/src/arm/imx6qdl-wandboard.dtsi
@@ -109,19 +109,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
@@ -129,8 +129,8 @@
 
 		pinctrl_i2c1: i2c1grp {
 			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL 		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA 		0x4001b8b1
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
 			>;
 		};
 
@@ -211,6 +211,7 @@
 	phy-reset-gpios = <&gpio3 29 0>;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
 };
 
@@ -233,7 +234,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/src/arm/imx6qdl.dtsi b/src/arm/imx6qdl.dtsi
index ed613ebe0812..e7d30f45b161 100644
--- a/src/arm/imx6qdl.dtsi
+++ b/src/arm/imx6qdl.dtsi
@@ -13,9 +13,18 @@
 #include <dt-bindings/clock/imx6qdl-clock.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
+
 	aliases {
 		ethernet0 = &fec;
 		can0 = &can1;
@@ -185,6 +194,7 @@
 			cache-level = <2>;
 			arm,tag-latency = <4 2 3>;
 			arm,data-latency = <4 2 3>;
+			arm,shared-override;
 		};
 
 		pcie: pcie@0x01000000 {
@@ -203,9 +213,9 @@
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+					<0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
 				 <&clks IMX6QDL_CLK_LVDS1_GATE>,
 				 <&clks IMX6QDL_CLK_PCIE_REF_125M>;
@@ -242,7 +252,7 @@
 					clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>,
 						 <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>,
 						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>,
-						 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_MLB>,
+						 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_DUMMY>,
 						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>;
 					clock-names = "core",  "rxtx0",
 						      "rxtx1", "rxtx2",
@@ -1091,15 +1101,20 @@
 			};
 
 			weim: weim@021b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
 				compatible = "fsl,imx6q-weim";
 				reg = <0x021b8000 0x4000>;
 				interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_EIM_SLOW>;
+				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
 			};
 
 			ocotp: ocotp@021bc000 {
 				compatible = "fsl,imx6q-ocotp", "syscon";
 				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6QDL_CLK_IIM>;
 			};
 
 			tzasc@021d0000 { /* TZASC1 */
@@ -1255,7 +1270,7 @@
 				#size-cells = <0>;
 				reg = <3>;
 
-				ipu1_di0_disp1: disp1-endpoint {
+				ipu1_di1_disp1: disp1-endpoint {
 				};
 
 				ipu1_di1_hdmi: hdmi-endpoint {
diff --git a/src/arm/imx6qp.dtsi b/src/arm/imx6qp.dtsi
index 886dbf2eca49..0d4977ab7d29 100644
--- a/src/arm/imx6qp.dtsi
+++ b/src/arm/imx6qp.dtsi
@@ -85,5 +85,22 @@
 		pcie: pcie@0x01000000 {
 			compatible = "fsl,imx6qp-pcie", "snps,dw-pcie";
 		};
+
+		aips-bus@02100000 {
+			mmdc0: mmdc@021b0000 { /* MMDC0 */
+				compatible = "fsl,imx6qp-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+			};
+		};
 	};
 };
+
+&ldb {
+	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>;
+	clock-names = "di0_pll", "di1_pll",
+		      "di0_sel", "di1_sel", "di2_sel", "di3_sel",
+		      "di0", "di1";
+};
diff --git a/src/arm/imx6sl-warp.dts b/src/arm/imx6sl-warp.dts
index 058bcdceb81a..72c7745f51d3 100644
--- a/src/arm/imx6sl-warp.dts
+++ b/src/arm/imx6sl-warp.dts
@@ -84,7 +84,7 @@
 &uart5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart5>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/src/arm/imx6sl.dtsi b/src/arm/imx6sl.dtsi
index d12b250342a6..cc9572ea2860 100644
--- a/src/arm/imx6sl.dtsi
+++ b/src/arm/imx6sl.dtsi
@@ -8,11 +8,21 @@
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
-#include "skeleton.dtsi"
 #include "imx6sl-pinfunc.h"
 #include <dt-bindings/clock/imx6sl-clock.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
+
 	aliases {
 		ethernet0 = &fec;
 		gpio0 = &gpio1;
@@ -375,6 +385,12 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 22 1>, <&iomuxc  1 20 2>,
+					      <&iomuxc  3 23 1>, <&iomuxc  4 25 1>,
+					      <&iomuxc  5 24 1>, <&iomuxc  6 19 1>,
+					      <&iomuxc  7 36 2>, <&iomuxc  9 44 8>,
+					      <&iomuxc 17 38 6>, <&iomuxc 23 68 4>,
+					      <&iomuxc 27 64 4>, <&iomuxc 31 52 1>;
 			};
 
 			gpio2: gpio@020a0000 {
@@ -386,6 +402,13 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0  53 3>, <&iomuxc  3  72 2>,
+					      <&iomuxc  5  34 2>, <&iomuxc  7  57 4>,
+					      <&iomuxc 11  56 1>, <&iomuxc 12  61 3>,
+					      <&iomuxc 15 107 1>, <&iomuxc 16 132 2>,
+					      <&iomuxc 18 135 1>, <&iomuxc 19 134 1>,
+					      <&iomuxc 20 108 2>, <&iomuxc 22 120 1>,
+					      <&iomuxc 23 125 7>, <&iomuxc 30 110 2>;
 			};
 
 			gpio3: gpio@020a4000 {
@@ -397,6 +420,14 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 112 8>, <&iomuxc  8 121 4>,
+					      <&iomuxc 12  97 4>, <&iomuxc 16 166 3>,
+					      <&iomuxc 19  85 2>, <&iomuxc 21 137 2>,
+					      <&iomuxc 23 136 1>, <&iomuxc 24  91 1>,
+					      <&iomuxc 25  99 1>, <&iomuxc 26  92 1>,
+					      <&iomuxc 27 100 1>, <&iomuxc 28  93 1>,
+					      <&iomuxc 29 101 1>, <&iomuxc 30  94 1>,
+					      <&iomuxc 31 102 1>;
 			};
 
 			gpio4: gpio@020a8000 {
@@ -408,6 +439,21 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0  95 1>, <&iomuxc  1 103 1>,
+					      <&iomuxc  2  96 1>, <&iomuxc  3 104 1>,
+					      <&iomuxc  4  97 1>, <&iomuxc  5 105 1>,
+					      <&iomuxc  6  98 1>, <&iomuxc  7 106 1>,
+					      <&iomuxc  8  28 1>, <&iomuxc  9  27 1>,
+					      <&iomuxc 10  26 1>, <&iomuxc 11  29 1>,
+					      <&iomuxc 12  32 1>, <&iomuxc 13  31 1>,
+					      <&iomuxc 14  30 1>, <&iomuxc 15  33 1>,
+					      <&iomuxc 16  84 1>, <&iomuxc 17  79 2>,
+					      <&iomuxc 19  78 1>, <&iomuxc 20  76 1>,
+					      <&iomuxc 21  81 2>, <&iomuxc 23  75 1>,
+					      <&iomuxc 24  83 1>, <&iomuxc 25  74 1>,
+					      <&iomuxc 26  77 1>, <&iomuxc 27 159 1>,
+					      <&iomuxc 28 154 1>, <&iomuxc 29 157 1>,
+					      <&iomuxc 30 152 1>, <&iomuxc 31 156 1>;
 			};
 
 			gpio5: gpio@020ac000 {
@@ -419,6 +465,17 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 158 1>, <&iomuxc  1 151 1>,
+					      <&iomuxc  2 155 1>, <&iomuxc  3 153 1>,
+					      <&iomuxc  4 150 1>, <&iomuxc  5 149 1>,
+					      <&iomuxc  6 144 1>, <&iomuxc  7 147 1>,
+					      <&iomuxc  8 142 1>, <&iomuxc  9 146 1>,
+					      <&iomuxc 10 148 1>, <&iomuxc 11 141 1>,
+					      <&iomuxc 12 145 1>, <&iomuxc 13 143 1>,
+					      <&iomuxc 14 140 1>, <&iomuxc 15 139 1>,
+					      <&iomuxc 16 164 2>, <&iomuxc 18 160 1>,
+					      <&iomuxc 19 162 1>, <&iomuxc 20 163 1>,
+					      <&iomuxc 21 161 1>;
 			};
 
 			kpp: kpp@020b8000 {
@@ -461,7 +518,7 @@
 					     <0 54 IRQ_TYPE_LEVEL_HIGH>,
 					     <0 127 IRQ_TYPE_LEVEL_HIGH>;
 
-				regulator-1p1@110 {
+				regulator-1p1 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd1p1";
 					regulator-min-microvolt = <800000>;
@@ -475,7 +532,7 @@
 					anatop-max-voltage = <1375000>;
 				};
 
-				regulator-3p0@120 {
+				regulator-3p0 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd3p0";
 					regulator-min-microvolt = <2800000>;
@@ -489,7 +546,7 @@
 					anatop-max-voltage = <3400000>;
 				};
 
-				regulator-2p5@130 {
+				regulator-2p5 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd2p5";
 					regulator-min-microvolt = <2100000>;
@@ -503,7 +560,7 @@
 					anatop-max-voltage = <2850000>;
 				};
 
-				reg_arm: regulator-vddcore@140 {
+				reg_arm: regulator-vddcore {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vddarm";
 					regulator-min-microvolt = <725000>;
@@ -520,7 +577,7 @@
 					anatop-max-voltage = <1450000>;
 				};
 
-				reg_pu: regulator-vddpu@140 {
+				reg_pu: regulator-vddpu {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vddpu";
 					regulator-min-microvolt = <725000>;
@@ -537,7 +594,7 @@
 					anatop-max-voltage = <1450000>;
 				};
 
-				reg_soc: regulator-vddsoc@140 {
+				reg_soc: regulator-vddsoc {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vddsoc";
 					regulator-min-microvolt = <725000>;
@@ -846,13 +903,18 @@
 			};
 
 			weim: weim@021b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
 				reg = <0x021b8000 0x4000>;
 				interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
 			};
 
 			ocotp: ocotp@021bc000 {
 				compatible = "fsl,imx6sl-ocotp", "syscon";
 				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6SL_CLK_OCOTP>;
 			};
 
 			audmux: audmux@021d8000 {
diff --git a/src/arm/imx6sx-nitrogen6sx.dts b/src/arm/imx6sx-nitrogen6sx.dts
index ba62348d8284..9b817f3501a6 100644
--- a/src/arm/imx6sx-nitrogen6sx.dts
+++ b/src/arm/imx6sx-nitrogen6sx.dts
@@ -326,7 +326,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/src/arm/imx6sx-pinfunc.h b/src/arm/imx6sx-pinfunc.h
index bb9c6b78cb97..42c4c800feea 100644
--- a/src/arm/imx6sx-pinfunc.h
+++ b/src/arm/imx6sx-pinfunc.h
@@ -308,6 +308,20 @@
 #define MX6SX_PAD_ENET1_RX_CLK__VDEC_DEBUG_35                     0x008C 0x03D4 0x0000 0x8 0x0
 #define MX6SX_PAD_ENET1_RX_CLK__PCIE_CTRL_DEBUG_29                0x008C 0x03D4 0x0000 0x9 0x0
 #define MX6SX_PAD_ENET1_TX_CLK__ENET1_TX_CLK                      0x0090 0x03D8 0x0000 0x0 0x0
+/*
+ * SION bit is necessary for ENET1_REF_CLK1 (ENET2_REF_CLK2 untested) if it is
+ * used as clock output of IMX6SX_CLK_ENET_REF (ENET1_TX_CLK) to e.g. supply a
+ * PHY in RMII mode. This configuration is valid if:
+ *  - bit 1 in field IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK is set
+ *  - bit 1 in field IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_MASK unset
+ * It seems to be a silicon bug that in this configuration ENET1_TX reference
+ * clock isn't provided automatically.  According to i.MX6SX reference manual
+ * (IOMUXC_GPR_GPR1 field descriptions: ENET1_CLK_SEL, Rev. 0 from 2/2015) it
+ * should be the case.
+ * So this might have unwanted side effects for other hardware units that are
+ * also connected to that pin and using respective function as input (e.g.
+ * UART1's DTR handling on MX6SX_PAD_ENET1_TX_CLK__UART1_DTR_B).
+ */
 #define MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1                    0x0090 0x03D8 0x0760 0x1 0x1
 #define MX6SX_PAD_ENET1_TX_CLK__AUDMUX_AUD4_RXD                   0x0090 0x03D8 0x0644 0x2 0x1
 #define MX6SX_PAD_ENET1_TX_CLK__UART1_DTR_B                       0x0090 0x03D8 0x0000 0x3 0x0
diff --git a/src/arm/imx6sx-sabreauto.dts b/src/arm/imx6sx-sabreauto.dts
index 96ea936eeeb0..240a2864d044 100644
--- a/src/arm/imx6sx-sabreauto.dts
+++ b/src/arm/imx6sx-sabreauto.dts
@@ -64,7 +64,7 @@
 	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
 	no-1-8-v;
 	keep-power-in-suspend;
-	enable-sdio-wakup;
+	wakeup-source;
 	status = "okay";
 };
 
diff --git a/src/arm/imx6sx-sdb.dtsi b/src/arm/imx6sx-sdb.dtsi
index e5eafe4d9a70..da815527a7f8 100644
--- a/src/arm/imx6sx-sdb.dtsi
+++ b/src/arm/imx6sx-sdb.dtsi
@@ -192,10 +192,10 @@
 };
 
 &i2c4 {
-        clock-frequency = <100000>;
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_i2c4>;
-        status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
 
 	codec: wm8962@1a {
 		compatible = "wlf,wm8962";
@@ -273,7 +273,7 @@
 &uart5 { /* for bluetooth */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart5>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -290,6 +290,14 @@
 	status = "okay";
 };
 
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
@@ -322,6 +330,12 @@
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
 	imx6x-sdb {
 		pinctrl_audmux: audmuxgrp {
@@ -588,5 +602,11 @@
 				MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */
 			>;
 		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0
+			>;
+		};
 	};
 };
diff --git a/src/arm/imx6sx-udoo-neo-basic.dts b/src/arm/imx6sx-udoo-neo-basic.dts
new file mode 100644
index 000000000000..0c1fc1a8f913
--- /dev/null
+++ b/src/arm/imx6sx-udoo-neo-basic.dts
@@ -0,0 +1,69 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6sx-udoo-neo.dtsi"
+
+/ {
+	model = "UDOO Neo Basic";
+	compatible = "udoo,neobasic", "fsl,imx6sx";
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&fec1 {
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
diff --git a/src/arm/imx6sx-udoo-neo-extended.dts b/src/arm/imx6sx-udoo-neo-extended.dts
new file mode 100644
index 000000000000..5d6c2274ee2b
--- /dev/null
+++ b/src/arm/imx6sx-udoo-neo-extended.dts
@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6sx-udoo-neo.dtsi"
+
+/ {
+	model = "UDOO Neo Extended";
+	compatible = "udoo,neoextended", "fsl,imx6sx";
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+};
diff --git a/src/arm/imx6sx-udoo-neo-full.dts b/src/arm/imx6sx-udoo-neo-full.dts
new file mode 100644
index 000000000000..653ceb29e28b
--- /dev/null
+++ b/src/arm/imx6sx-udoo-neo-full.dts
@@ -0,0 +1,69 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6sx-udoo-neo.dtsi"
+
+/ {
+	model = "UDOO Neo Full";
+	compatible = "udoo,neofull", "fsl,imx6sx";
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&fec1 {
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
diff --git a/src/arm/imx6sx-udoo-neo.dtsi b/src/arm/imx6sx-udoo-neo.dtsi
new file mode 100644
index 000000000000..2b65d26f4396
--- /dev/null
+++ b/src/arm/imx6sx-udoo-neo.dtsi
@@ -0,0 +1,293 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6sx.dtsi"
+
+/ {
+	compatible = "fsl,imx6sx";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		red {
+			label = "udoo-neo:red:mmc";
+			gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+
+		orange {
+			label = "udoo-neo:orange:user";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+
+	reg_sdio_pwr: regulator-sdio-pwr {
+		compatible = "regulator-fixed";
+		gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "SDIO_PWR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	arm-supply = <&sw1a_reg>;
+	soc-supply = <&sw1c_reg>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pmic: pmic@08 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins =
+			<MX6SX_PAD_ENET1_CRS__GPIO2_IO_1	0xa0b1>,
+			<MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0b1>,
+			<MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0b1>,
+			<MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0b1>,
+			<MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0b1>,
+			<MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0b1>,
+
+			<MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x3081>,
+			<MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9	0x3081>,
+			<MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081>,
+			<MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081>,
+			<MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081>,
+			<MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER	0x3081>,
+
+			<MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins =
+			<MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1>,
+			<MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins =
+			<MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1>,
+			<MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins =
+			<MX6SX_PAD_GPIO1_IO06__UART2_TX		0x1b0b1>,
+			<MX6SX_PAD_GPIO1_IO07__UART2_RX		0x1b0b1>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins =
+			<MX6SX_PAD_SD4_DATA4__UART5_RX		0x1b0b1>,
+			<MX6SX_PAD_SD4_DATA5__UART5_TX		0x1b0b1>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins =
+			<MX6SX_PAD_CSI_DATA00__UART6_RI_B	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA01__UART6_DSR_B	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA02__UART6_DTR_B	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA03__UART6_DCD_B	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA04__UART6_RX		0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA05__UART6_TX		0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA06__UART6_RTS_B	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA07__UART6_CTS_B	0x1b0b1>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins =
+			<MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059>,
+			<MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059>,
+			<MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059>,
+			<MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059>,
+			<MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059>,
+			<MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059>,
+			<MX6SX_PAD_SD1_DATA0__GPIO6_IO_2	0x17059>; /* CD */
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* Cortex-M4 serial */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "disabled";
+};
+
+/* Arduino serial */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "disabled";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_sdio_pwr>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
diff --git a/src/arm/imx6sx.dtsi b/src/arm/imx6sx.dtsi
index 6a993bfda248..dd4ec85ecbaa 100644
--- a/src/arm/imx6sx.dtsi
+++ b/src/arm/imx6sx.dtsi
@@ -11,9 +11,19 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include "imx6sx-pinfunc.h"
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
+
 	aliases {
 		can0 = &flexcan1;
 		can1 = &flexcan2;
@@ -159,6 +169,16 @@
 			arm,data-latency = <4 2 3>;
 		};
 
+		gpu: gpu@01800000 {
+			compatible = "vivante,gc";
+			reg = <0x01800000 0x4000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6SX_CLK_GPU>,
+				 <&clks IMX6SX_CLK_GPU>,
+				 <&clks IMX6SX_CLK_GPU>;
+			clock-names = "bus", "core", "shader";
+		};
+
 		dma_apbh: dma-apbh@01804000 {
 			compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x01804000 0x2000>;
@@ -438,6 +458,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 5 26>;
 			};
 
 			gpio2: gpio@020a0000 {
@@ -449,6 +470,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 31 20>;
 			};
 
 			gpio3: gpio@020a4000 {
@@ -460,6 +482,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 51 29>;
 			};
 
 			gpio4: gpio@020a8000 {
@@ -471,6 +494,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 80 32>;
 			};
 
 			gpio5: gpio@020ac000 {
@@ -482,6 +506,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 112 24>;
 			};
 
 			gpio6: gpio@020b0000 {
@@ -493,6 +518,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 136 12>, <&iomuxc 12 158 11>;
 			};
 
 			gpio7: gpio@020b4000 {
@@ -504,6 +530,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>;
 			};
 
 			kpp: kpp@020b8000 {
@@ -547,7 +574,7 @@
 					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 
-				regulator-1p1@110 {
+				regulator-1p1 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd1p1";
 					regulator-min-microvolt = <800000>;
@@ -561,7 +588,7 @@
 					anatop-max-voltage = <1375000>;
 				};
 
-				regulator-3p0@120 {
+				regulator-3p0 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd3p0";
 					regulator-min-microvolt = <2800000>;
@@ -575,7 +602,7 @@
 					anatop-max-voltage = <3400000>;
 				};
 
-				regulator-2p5@130 {
+				regulator-2p5 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd2p5";
 					regulator-min-microvolt = <2100000>;
@@ -589,7 +616,7 @@
 					anatop-max-voltage = <2875000>;
 				};
 
-				reg_arm: regulator-vddcore@140 {
+				reg_arm: regulator-vddcore {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vddarm";
 					regulator-min-microvolt = <725000>;
@@ -606,7 +633,7 @@
 					anatop-max-voltage = <1450000>;
 				};
 
-				reg_pcie: regulator-vddpcie@140 {
+				reg_pcie: regulator-vddpcie {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vddpcie";
 					regulator-min-microvolt = <725000>;
@@ -622,7 +649,7 @@
 					anatop-max-voltage = <1450000>;
 				};
 
-				reg_soc: regulator-vddsoc@140 {
+				reg_soc: regulator-vddsoc {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vddsoc";
 					regulator-min-microvolt = <725000>;
@@ -841,7 +868,7 @@
 				fsl,num-tx-queues=<3>;
 				fsl,num-rx-queues=<3>;
 				status = "disabled";
-                        };
+			};
 
 			mlb: mlb@0218c000 {
 				reg = <0x0218c000 0x4000>;
@@ -951,10 +978,14 @@
 			};
 
 			weim: weim@021b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
 				compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
 				reg = <0x021b8000 0x4000>;
 				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_EIM_SLOW>;
+				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
 			};
 
 			ocotp: ocotp@021bc000 {
@@ -1126,7 +1157,7 @@
 				lcdif1: lcdif@02220000 {
 					compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
 					reg = <0x02220000 0x4000>;
-					interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 5 IRQ_TYPE_EDGE_RISING>;
 					clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
 						 <&clks IMX6SX_CLK_LCDIF_APB>,
 						 <&clks IMX6SX_CLK_DISPLAY_AXI>;
@@ -1137,7 +1168,7 @@
 				lcdif2: lcdif@02224000 {
 					compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
 					reg = <0x02224000 0x4000>;
-					interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>;
 					clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>,
 						 <&clks IMX6SX_CLK_LCDIF_APB>,
 						 <&clks IMX6SX_CLK_DISPLAY_AXI>;
@@ -1164,7 +1195,7 @@
 				fsl,adck-max-frequency = <30000000>, <40000000>,
 							 <20000000>;
 				status = "disabled";
-                        };
+			};
 
 			adc2: adc@02284000 {
 				compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
@@ -1175,7 +1206,7 @@
 				fsl,adck-max-frequency = <30000000>, <40000000>,
 							 <20000000>;
 				status = "disabled";
-                        };
+			};
 
 			wdog3: wdog@02288000 {
 				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
@@ -1273,4 +1304,9 @@
 			status = "disabled";
 		};
 	};
+
+	gpu-subsystem {
+		compatible = "fsl,imx-gpu-subsystem";
+		cores = <&gpu>;
+	};
 };
diff --git a/src/arm/imx6ul-14x14-evk.dts b/src/arm/imx6ul-14x14-evk.dts
index 668a72997590..00f98e5bfcaf 100644
--- a/src/arm/imx6ul-14x14-evk.dts
+++ b/src/arm/imx6ul-14x14-evk.dts
@@ -22,6 +22,14 @@
 		reg = <0x80000000 0x20000000>;
 	};
 
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -125,6 +133,46 @@
 	};
 };
 
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display {
+		bits-per-pixel = <16>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+
+			timing0: timing0 {
+				clock-frequency = <9200000>;
+				hactive = <480>;
+				vactive = <272>;
+				hfront-porch = <8>;
+				hback-porch = <4>;
+				hsync-len = <41>;
+				vback-porch = <2>;
+				vfront-porch = <4>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
 &qspi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_qspi>;
@@ -146,6 +194,7 @@
 			  <&clks IMX6UL_CLK_SAI2>;
 	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
 	assigned-clock-rates = <0>, <12288000>;
+	fsl,sai-mclk-direction-output;
 	status = "okay";
 };
 
@@ -171,12 +220,12 @@
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &usbotg1 {
-	dr_mode = "peripheral";
+	dr_mode = "otg";
 	status = "okay";
 };
 
@@ -186,6 +235,14 @@
 	status = "okay";
 };
 
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
 &usdhc1 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
@@ -207,6 +264,12 @@
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 
@@ -435,4 +498,10 @@
 			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
 		>;
 	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
+		>;
+	};
 };
diff --git a/src/arm/imx6ul-geam-kit.dts b/src/arm/imx6ul-geam-kit.dts
new file mode 100644
index 000000000000..4c4af76143e3
--- /dev/null
+++ b/src/arm/imx6ul-geam-kit.dts
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6ul-geam.dtsi"
+
+/ {
+	model = "Engicam GEAM6UL";
+	compatible = "engicam,imx6ul-geam", "fsl,imx6ul";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&lcdif {
+	display = <&display0>;
+	status = "okay";
+
+	display0: display {
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <28000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <30>;
+				hback-porch = <30>;
+				hsync-len = <64>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				vsync-len = <20>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	status = "okay";
+};
+
+&tsc {
+	measure-delay-time = <0x1ffff>;
+	pre-charge-time = <0x1fff>;
+	status = "okay";
+};
diff --git a/src/arm/imx6ul-geam.dtsi b/src/arm/imx6ul-geam.dtsi
new file mode 100644
index 000000000000..64eb9ed59b9c
--- /dev/null
+++ b/src/arm/imx6ul-geam.dtsi
@@ -0,0 +1,361 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6ul.dtsi"
+
+/ {
+	memory {
+		reg = <0x80000000 0x08000000>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	display = <&display0>;
+};
+
+&tsc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tsc>;
+	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0		/* ENET_nRST */
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2	0x4001b031
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpmi-nand {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE         0xb0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE         0xb0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B       0xb0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B     0xb0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B       0xb0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B       0xb0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00   0xb0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01   0xb0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02   0xb0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03   0xb0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04   0xb0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05   0xb0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06   0xb0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07   0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+		fsl,pin = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0xb0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x1b0b1
+			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK     0x17070
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD     0x10070
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0  0x17070
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1  0x17070
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2  0x17070
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3  0x17070
+		>;
+	};
+};
diff --git a/src/arm/imx6ul-liteboard.dts b/src/arm/imx6ul-liteboard.dts
new file mode 100644
index 000000000000..6e04cb9202f4
--- /dev/null
+++ b/src/arm/imx6ul-liteboard.dts
@@ -0,0 +1,147 @@
+/*
+ * Copyright 2016 Grinn
+ *
+ * Author: Marcin Niestroj <m.niestroj@grinn-global.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6ul-litesom.dtsi"
+
+/ {
+	model = "Grinn i.MX6UL liteBoard";
+	compatible = "grinn,imx6ul-liteboard", "grinn,imx6ul-litesom",
+		     "fsl,imx6ul";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg1_vbus>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10071
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usb_otg1_vbus: usb-otg1-vbus {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x79
+		>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
diff --git a/src/arm/imx6ul-litesom.dtsi b/src/arm/imx6ul-litesom.dtsi
new file mode 100644
index 000000000000..461292d33417
--- /dev/null
+++ b/src/arm/imx6ul-litesom.dtsi
@@ -0,0 +1,82 @@
+/*
+ * Copyright 2016 Grinn
+ *
+ * Author: Marcin Niestroj <m.niestroj@grinn-global.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6ul.dtsi"
+
+/ {
+	model = "Grinn i.MX6UL liteSOM";
+	compatible = "grinn,imx6ul-litesom", "fsl,imx6ul";
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&iomuxc {
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK	    0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD	    0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
+			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B  0x17059
+		>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	bus-width = <8>;
+	status = "okay";
+};
diff --git a/src/arm/imx6ul-pico-hobbit.dts b/src/arm/imx6ul-pico-hobbit.dts
index 8ce1fec36e86..827d9e8fc74e 100644
--- a/src/arm/imx6ul-pico-hobbit.dts
+++ b/src/arm/imx6ul-pico-hobbit.dts
@@ -100,6 +100,18 @@
 		gpio = <&gpio1 6 0>;
 	};
 
+	reg_brcm: regulator-brcm {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+
 	sound {
 		compatible = "fsl,imx-audio-sgtl5000";
 		model = "imx6ul-sgtl5000";
@@ -151,8 +163,8 @@
 	phy-mode = "rmii";
 	phy-handle = <&ethphy1>;
 	status = "okay";
-	phy-reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <11>;
+	phy-reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
 
 	mdio {
 		#address-cells = <1>;
@@ -286,7 +298,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -325,12 +337,27 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	no-1-8-v;
+	non-removable;
 	keep-power-in-suspend;
 	wakeup-source;
+	vmmc-supply = <&reg_brcm>;
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
+	pinctrl_brcm_reg: brcmreggrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DATA06__GPIO4_IO08	0x10b0	/* WL_REG_ON */
+			MX6UL_PAD_NAND_DATA04__GPIO4_IO06	0x10b0	/* WL_HOST_WAKE */
+		>;
+	};
+
 	pinctrl_enet2: enet2grp {
 		fsl,pins = <
 			MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO	0x1b0b0
@@ -513,4 +540,10 @@
 			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
 		>;
 	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
+		>;
+	};
 };
diff --git a/src/arm/imx6ul-tx6ul-mainboard.dts b/src/arm/imx6ul-tx6ul-mainboard.dts
index d25899b71575..7c5dd1b316ca 100644
--- a/src/arm/imx6ul-tx6ul-mainboard.dts
+++ b/src/arm/imx6ul-tx6ul-mainboard.dts
@@ -146,12 +146,12 @@
 
 &uart1 {
 	pinctrl-0 = <&pinctrl_uart1>;
-	/delete-property/ fsl,uart-has-rtscts;
+	/delete-property/ uart-has-rtscts;
 };
 
 &uart2 {
 	pinctrl-0 = <&pinctrl_uart2>;
-	/delete-property/ fsl,uart-has-rtscts;
+	/delete-property/ uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/src/arm/imx6ul-tx6ul.dtsi b/src/arm/imx6ul-tx6ul.dtsi
index 437e9aad5920..530e9ca13a74 100644
--- a/src/arm/imx6ul-tx6ul.dtsi
+++ b/src/arm/imx6ul-tx6ul.dtsi
@@ -563,21 +563,21 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart5 &pinctrl_uart5_rtscts>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/src/arm/imx6ul.dtsi b/src/arm/imx6ul.dtsi
index 4356b655ef02..53d3f8e41e9b 100644
--- a/src/arm/imx6ul.dtsi
+++ b/src/arm/imx6ul.dtsi
@@ -11,9 +11,19 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include "imx6ul-pinfunc.h"
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
+
 	aliases {
 		ethernet0 = &fec1;
 		ethernet1 = &fec2;
@@ -36,6 +46,9 @@
 		serial5 = &uart6;
 		serial6 = &uart7;
 		serial7 = &uart8;
+		sai1 = &sai1;
+		sai2 = &sai2;
+		sai3 = &sai3;
 		spi0 = &ecspi1;
 		spi1 = &ecspi2;
 		spi2 = &ecspi3;
@@ -408,6 +421,8 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 23 10>, <&iomuxc 10 17 6>,
+					      <&iomuxc 16 33 16>;
 			};
 
 			gpio2: gpio@020a0000 {
@@ -419,6 +434,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 49 16>, <&iomuxc 16 111 6>;
 			};
 
 			gpio3: gpio@020a4000 {
@@ -430,6 +446,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 65 29>;
 			};
 
 			gpio4: gpio@020a8000 {
@@ -441,6 +458,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 94 17>, <&iomuxc 17 117 12>;
 			};
 
 			gpio5: gpio@020ac000 {
@@ -452,6 +470,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 7 10>, <&iomuxc 10 5 2>;
 			};
 
 			fec2: ethernet@020b4000 {
@@ -512,7 +531,7 @@
 					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 
-				reg_3p0: regulator-3p0@120 {
+				reg_3p0: regulator-3p0 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd3p0";
 					regulator-min-microvolt = <2625000>;
@@ -526,7 +545,7 @@
 					anatop-enable-bit = <0>;
 				};
 
-				reg_arm: regulator-vddcore@140 {
+				reg_arm: regulator-vddcore {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "cpu";
 					regulator-min-microvolt = <725000>;
@@ -543,7 +562,7 @@
 					anatop-max-voltage = <1450000>;
 				};
 
-				reg_soc: regulator-vddsoc@140 {
+				reg_soc: regulator-vddsoc {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vddsoc";
 					regulator-min-microvolt = <725000>;
@@ -641,7 +660,8 @@
 			};
 
 			gpr: iomuxc-gpr@020e4000 {
-				compatible = "fsl,imx6ul-iomuxc-gpr", "syscon";
+				compatible = "fsl,imx6ul-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
 				reg = <0x020e4000 0x4000>;
 			};
 
diff --git a/src/arm/imx6ull-14x14-evk.dts b/src/arm/imx6ull-14x14-evk.dts
new file mode 100644
index 000000000000..db5bc076e1cc
--- /dev/null
+++ b/src/arm/imx6ull-14x14-evk.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6ul-14x14-evk.dts"
+
+/ {
+	model = "Freescale i.MX6 UlltraLite 14x14 EVK Board";
+	compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>;
+	assigned-clock-rates = <320000000>;
+};
diff --git a/src/arm/imx6ull-pinfunc.h b/src/arm/imx6ull-pinfunc.h
new file mode 100644
index 000000000000..118202336691
--- /dev/null
+++ b/src/arm/imx6ull-pinfunc.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DTS_IMX6ULL_PINFUNC_H
+#define __DTS_IMX6ULL_PINFUNC_H
+
+#include "imx6ul-pinfunc.h"
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6ULL_PAD_ENET2_RX_DATA0__EPDC_SDDO08                    0x00E4 0x0370 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_RX_DATA1__EPDC_SDDO09                    0x00E8 0x0374 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_RX_EN__EPDC_SDDO10                       0x00EC 0x0378 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_TX_DATA0__EPDC_SDDO11                    0x00F0 0x037C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_TX_DATA1__EPDC_SDDO12                    0x00F4 0x0380 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_TX_EN__EPDC_SDDO13                       0x00F8 0x0384 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_TX_CLK__EPDC_SDDO14                      0x00FC 0x0388 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_RX_ER__EPDC_SDDO15                       0x0100 0x038C 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_CLK__EPDC_SDCLK                            0x0104 0x0390 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_ENABLE__EPDC_SDLE                          0x0108 0x0394 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_HSYNC__EPDC_SDOE                           0x010C 0x0398 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_VSYNC__EPDC_SDCE0                          0x0110 0x039C 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_RESET__EPDC_GDOE                           0x0114 0x03A0 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA00__EPDC_SDDO00                        0x0118 0x03A4 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA01__EPDC_SDDO01                        0x011C 0x03A8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA02__EPDC_SDDO02                        0x0120 0x03AC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA03__EPDC_SDDO03                        0x0124 0x03B0 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA04__EPDC_SDDO04                        0x0128 0x03B4 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA05__EPDC_SDDO05                        0x012C 0x03B8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA06__EPDC_SDDO06                        0x0130 0x03BC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA07__EPDC_SDDO07                        0x0134 0x03C0 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA14__EPDC_SDSHR                         0x0150 0x03DC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA15__EPDC_GDRL                          0x0154 0x03E0 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA16__EPDC_GDCLK                         0x0158 0x03E4 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA17__EPDC_GDSP                          0x015C 0x03E8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA21__EPDC_SDCE1                         0x016C 0x03F8 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_MCLK__ESAI_TX3_RX2                         0x01D4 0x0460 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_PIXCLK__ESAI_TX2_RX3                       0x01D8 0x0464 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_VSYNC__ESAI_TX4_RX1                        0x01DC 0x0468 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_HSYNC__ESAI_TX1                            0x01E0 0x046C 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA00__ESAI_TX_HF_CLK                     0x01E4 0x0470 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA01__ESAI_RX_HF_CLK                     0x01E8 0x0474 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA02__ESAI_RX_FS                         0x01EC 0x0478 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA03__ESAI_RX_CLK                        0x01F0 0x047C 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS                         0x01F4 0x0480 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK                        0x01F8 0x0484 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0                       0x01FC 0x0488 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA07__ESAI_T0                            0x0200 0x048C 0x0000 0x9 0x0
+
+#endif /* __DTS_IMX6ULL_PINFUNC_H */
diff --git a/src/arm/imx6ull.dtsi b/src/arm/imx6ull.dtsi
new file mode 100644
index 000000000000..dee8ab8135e1
--- /dev/null
+++ b/src/arm/imx6ull.dtsi
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6ul.dtsi"
+#include "imx6ull-pinfunc.h"
diff --git a/src/arm/imx7-colibri-eval-v3.dtsi b/src/arm/imx7-colibri-eval-v3.dtsi
new file mode 100644
index 000000000000..373ee19196a6
--- /dev/null
+++ b/src/arm/imx7-colibri-eval-v3.dtsi
@@ -0,0 +1,144 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&bl {
+	brightness-levels = <0 4 8 16 32 64 128 255>;
+	default-brightness-level = <6>;
+	status = "okay";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&adc2 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc: m41t0m6@68 {
+		compatible = "st,m41t00";
+		reg = <0x68>;
+	};
+};
+
+&lcdif {
+	display = <&display0>;
+	status = "okay";
+
+	display0: lcd-display {
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing_vga>;
+
+			/* Standard VGA timing */
+			timing_vga: 640x480 {
+				clock-frequency = <25175000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hfront-porch = <24>;
+				vback-porch = <32>;
+				vfront-porch = <11>;
+				hsync-len = <96>;
+				vsync-len = <2>;
+				de-active = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usdhc1 {
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
diff --git a/src/arm/imx7-colibri.dtsi b/src/arm/imx7-colibri.dtsi
new file mode 100644
index 000000000000..a9cc65725f19
--- /dev/null
+++ b/src/arm/imx7-colibri.dtsi
@@ -0,0 +1,624 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_module_3v3_avdd: regulator-module-3v3-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx7-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		};
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+};
+
+&adc2 {
+	vref-supply = <&reg_vref_1v8>;
+};
+
+&cpu0 {
+	arm-supply = <&reg_DCDC2>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+		<&clks IMX7D_ENET_AXI_ROOT_CLK>,
+		<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
+		<&clks IMX7D_PLL_ENET_MAIN_50M_CLK>;
+	clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rmii";
+	phy-supply = <&reg_LDO1>;
+	fsl,magic-packet;
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1 &pinctrl_i2c1_int>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sai1_mclk>;
+		VDDA-supply = <&reg_module_3v3_avdd>;
+		VDDIO-supply = <&reg_module_3v3>;
+		VDDD-supply = <&reg_DCDC3>;
+	};
+
+	ad7879@2c {
+		compatible = "adi,ad7879-1";
+		reg = <0x2c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-max-pressure = <4096>;
+		adi,resistance-plate-x = <120>;
+		adi,first-conversion-delay = /bits/ 8 <3>;
+		adi,acquisition-time = /bits/ 8 <1>;
+		adi,median-filter-size = /bits/ 8 <2>;
+		adi,averaging = /bits/ 8 <1>;
+		adi,conversion-interval = /bits/ 8 <255>;
+	};
+
+	pmic@33 {
+		compatible = "ricoh,rn5t567";
+		reg = <0x33>;
+
+		regulators {
+			reg_DCDC1: DCDC1 {  /* V1.0_SOC */
+				regulator-min-microvolt =  <975000>;
+				regulator-max-microvolt = <1125000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_DCDC2: DCDC2 { /* V1.1_ARM */
+				regulator-min-microvolt =  <975000>;
+				regulator-max-microvolt = <1125000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_DCDC3: DCDC3 { /* V1.8 */
+				regulator-min-microvolt = <1775000>;
+				regulator-max-microvolt = <1825000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_DCDC4: DCDC4 { /* V1.35_DRAM */
+				regulator-min-microvolt = <1325000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_LDO1: LDO1 { /* PWR_EN_+V3.3_ETH */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_LDO2: LDO2 { /* +V1.8_SD */
+				regulator-min-microvolt = <1775000>;
+				regulator-max-microvolt = <3325000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_LDO3: LDO3 { /* PWR_EN_+V3.3_LPSR */
+				regulator-min-microvolt = <3275000>;
+				regulator-max-microvolt = <3325000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_LDO4: LDO4 { /* V1.8_LPSR */
+				regulator-min-microvolt = <1775000>;
+				regulator-max-microvolt = <1825000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_LDO5: LDO5 { /* PWR_EN_+V3.3 */
+				regulator-min-microvolt = <1775000>;
+				regulator-max-microvolt = <1825000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+&reg_1p0d {
+	vin-supply = <&reg_DCDC3>;
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	fsl,dte-mode;
+};
+
+&usbotg1 {
+	dr_mode = "host";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
+	no-1-8-v;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	disable-wp;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>;
+
+	pinctrl_gpio1: gpio1-grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3	0x14 /* SODIMM 55 */
+			MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2	0x14 /* SODIMM 63 */
+			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0X14 /* SODIMM 73 */
+			MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16	0X14 /* SODIMM 77 */
+			MX7D_PAD_EPDC_DATA09__GPIO2_IO9		0x14 /* SODIMM 89 */
+			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x14 /* SODIMM 91 */
+			MX7D_PAD_LCD_RESET__GPIO3_IO4		0x14 /* SODIMM 93 */
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14 /* SODIMM 95 */
+			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11	0x14 /* SODIMM 99 */
+			MX7D_PAD_EPDC_DATA10__GPIO2_IO10	0x14 /* SODIMM 105 */
+			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x14 /* SODIMM 107 */
+			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x14 /* SODIMM 111 */
+			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x14 /* SODIMM 113 */
+			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x14 /* SODIMM 115 */
+			MX7D_PAD_EPDC_DATA03__GPIO2_IO3		0x14 /* SODIMM 117 */
+			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x14 /* SODIMM 119 */
+			MX7D_PAD_EPDC_DATA05__GPIO2_IO5		0x14 /* SODIMM 121 */
+			MX7D_PAD_EPDC_DATA06__GPIO2_IO6		0x14 /* SODIMM 123 */
+			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x14 /* SODIMM 125 */
+			MX7D_PAD_EPDC_SDCE2__GPIO2_IO22		0x14 /* SODIMM 127 */
+			MX7D_PAD_UART3_RTS_B__GPIO4_IO6		0x14 /* SODIMM 131 */
+			MX7D_PAD_EPDC_GDRL__GPIO2_IO26		0x14 /* SODIMM 133 */
+			MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17	0x14 /* SODIMM 24 */
+			MX7D_PAD_SD2_DATA2__GPIO5_IO16		0x14 /* SODIMM 100 */
+			MX7D_PAD_SD2_DATA3__GPIO5_IO17		0x14 /* SODIMM 102 */
+			MX7D_PAD_EPDC_GDSP__GPIO2_IO27		0x14 /* SODIMM 104 */
+			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x14 /* SODIMM 106 */
+			MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x14 /* SODIMM 110 */
+			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x14 /* SODIMM 112 */
+			MX7D_PAD_EPDC_SDCLK__GPIO2_IO16		0x14 /* SODIMM 114 */
+			MX7D_PAD_EPDC_SDLE__GPIO2_IO17		0x14 /* SODIMM 116 */
+			MX7D_PAD_EPDC_SDOE__GPIO2_IO18		0x14 /* SODIMM 118 */
+			MX7D_PAD_EPDC_SDSHR__GPIO2_IO19		0x14 /* SODIMM 120 */
+			MX7D_PAD_EPDC_SDCE0__GPIO2_IO20		0x14 /* SODIMM 122 */
+			MX7D_PAD_EPDC_SDCE1__GPIO2_IO21		0x14 /* SODIMM 124 */
+			MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x14 /* SODIMM 126 */
+			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x14 /* SODIMM 128 */
+			MX7D_PAD_EPDC_SDCE3__GPIO2_IO23		0x14 /* SODIMM 130 */
+			MX7D_PAD_EPDC_GDCLK__GPIO2_IO24		0x14 /* SODIMM 132 */
+			MX7D_PAD_EPDC_GDOE__GPIO2_IO25		0x14 /* SODIMM 134 */
+			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x14 /* SODIMM 150 */
+			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x14 /* SODIMM 152 */
+			MX7D_PAD_SD2_CLK__GPIO5_IO12		0x14 /* SODIMM 184 */
+			MX7D_PAD_SD2_CMD__GPIO5_IO13		0x14 /* SODIMM 186 */
+		>;
+	};
+
+	pinctrl_gpio2: gpio2-grp { /* On X22 Camera interface */
+		fsl,pins = <
+			MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x14 /* SODIMM 65 */
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x14 /* SODIMM 69 */
+			MX7D_PAD_SD1_WP__GPIO5_IO1		0x14 /* SODIMM 71 */
+			MX7D_PAD_I2C4_SDA__GPIO4_IO15		0x14 /* SODIMM 75 */
+			MX7D_PAD_ECSPI1_MISO__GPIO4_IO18	0x14 /* SODIMM 79 */
+			MX7D_PAD_I2C3_SCL__GPIO4_IO12		0x14 /* SODIMM 81 */
+			MX7D_PAD_ECSPI2_MISO__GPIO4_IO22	0x14 /* SODIMM 85 */
+			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19		0x14 /* SODIMM 97 */
+			MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16	0x14 /* SODIMM 101 */
+			MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17	0x14 /* SODIMM 103 */
+			MX7D_PAD_I2C3_SDA__GPIO4_IO13		0x14 /* SODIMM 94 */
+			MX7D_PAD_I2C4_SCL__GPIO4_IO14		0x14 /* SODIMM 96 */
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x14 /* SODIMM 98 */
+		>;
+	};
+
+	pinctrl_gpio3: gpio3-grp { /* LCD 18-23 */
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA18__GPIO3_IO23		0x14 /* SODIMM 136 */
+			MX7D_PAD_LCD_DATA19__GPIO3_IO24		0x14 /* SODIMM 138 */
+			MX7D_PAD_LCD_DATA20__GPIO3_IO25		0x14 /* SODIMM 140 */
+			MX7D_PAD_LCD_DATA21__GPIO3_IO26		0x14 /* SODIMM 142 */
+			MX7D_PAD_LCD_DATA22__GPIO3_IO27		0x14 /* SODIMM 146 */
+			MX7D_PAD_LCD_DATA23__GPIO3_IO28		0x14 /* SODIMM 148 */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4-grp { /* Alternatively CAN2 */
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO15__GPIO1_IO15		0x14 /* SODIMM 178 */
+			MX7D_PAD_GPIO1_IO14__GPIO1_IO14		0x14 /* SODIMM 188 */
+		>;
+	};
+
+	pinctrl_i2c1_int: i2c1-int-grp { /* PMIC / TOUCH */
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x79
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_CRS__GPIO7_IO14			0x14
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x73
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x73
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x73
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER		0x73
+
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x73
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x73
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x73
+			MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1		0x73
+			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x3
+			MX7D_PAD_SD2_WP__ENET1_MDC			0x3
+		>;
+	};
+
+	pinctrl_ecspi3_cs: ecspi3-cs-grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__GPIO4_IO11		0x14
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3-grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SCL__ECSPI3_MISO		0x2
+			MX7D_PAD_I2C1_SDA__ECSPI3_MOSI		0x2
+			MX7D_PAD_I2C2_SCL__ECSPI3_SCLK		0x2
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2-grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x59
+			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x59
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpmi-nand-grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CLK__NAND_CLE		0x71
+			MX7D_PAD_SD3_CMD__NAND_ALE		0x71
+			MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B	0x71
+			MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B	0x71
+			MX7D_PAD_SAI1_TX_DATA__NAND_READY_B	0x74
+			MX7D_PAD_SD3_STROBE__NAND_RE_B		0x71
+			MX7D_PAD_SD3_RESET_B__NAND_WE_B		0x71
+			MX7D_PAD_SD3_DATA0__NAND_DATA00		0x71
+			MX7D_PAD_SD3_DATA1__NAND_DATA01		0x71
+			MX7D_PAD_SD3_DATA2__NAND_DATA02		0x71
+			MX7D_PAD_SD3_DATA3__NAND_DATA03		0x71
+			MX7D_PAD_SD3_DATA4__NAND_DATA04		0x71
+			MX7D_PAD_SD3_DATA5__NAND_DATA05		0x71
+			MX7D_PAD_SD3_DATA6__NAND_DATA06		0x71
+			MX7D_PAD_SD3_DATA7__NAND_DATA07		0x71
+		>;
+	};
+
+	pinctrl_i2c4: i2c4-grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA	0x4000007f
+			MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdif-dat-grp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
+			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+		>;
+	};
+
+	pinctrl_lcdif_dat_24: lcdif-dat-24-grp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
+			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
+			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
+			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
+			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
+			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdif-ctrl-grp {
+		fsl,pins = <
+			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
+			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+		>;
+	};
+
+	pinctrl_pwm1: pwm1-grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO08__PWM1_OUT		0x79
+		>;
+	};
+
+	pinctrl_pwm2: pwm2-grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO09__PWM2_OUT		0x79
+		>;
+	};
+
+	pinctrl_pwm3: pwm3-grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO10__PWM3_OUT		0x79
+		>;
+	};
+
+	pinctrl_pwm4: pwm4-grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO11__PWM4_OUT		0x79
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX	0x79
+			MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS	0x79
+			MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS	0x79
+		>;
+	};
+
+	pinctrl_uart1_ctrl1: uart1-ctrl1-grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_DATA1__GPIO5_IO15		0x14 /* DCD */
+			MX7D_PAD_SD2_DATA0__GPIO5_IO14		0x14 /* DTR */
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x79
+			MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x79
+			MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS 0x79
+			MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS 0x79
+		>;
+	};
+	pinctrl_uart3: uart3-grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX 0x79
+			MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x79
+		>;
+	};
+
+	pinctrl_usbotg2_reg: gpio-usbotg2-vbus {
+		fsl,pins = <
+			MX7D_PAD_UART3_CTS_B__GPIO4_IO7	0x14 /* SODIMM 129 USBH PEN */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1-grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD	0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK	0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x59
+		>;
+	};
+
+	pinctrl_sai1: sai1-grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK     0x1f
+			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
+			MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
+			MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
+		>;
+	};
+
+	pinctrl_sai1_mclk: sai1grp_mclk {
+		fsl,pins = <
+			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_lpsr>;
+
+	pinctrl_gpio_lpsr: gpio1-grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO01__GPIO1_IO1	0x59
+			MX7D_PAD_GPIO1_IO02__GPIO1_IO2	0x59
+			MX7D_PAD_GPIO1_IO03__GPIO1_IO3	0x59
+		>;
+	};
+
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO05__I2C1_SDA	0x4000007f
+			MX7D_PAD_GPIO1_IO04__I2C1_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_cd_usdhc1: usdhc1-cd-grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO00__GPIO1_IO0	0x59 /* CD */
+		>;
+	};
+
+	pinctrl_uart1_ctrl2: uart1-ctrl2-grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO07__GPIO1_IO7	0x14 /* DSR */
+			MX7D_PAD_GPIO1_IO06__GPIO1_IO6	0x14 /* RI */
+		>;
+	};
+};
diff --git a/src/arm/imx7d-cl-som-imx7.dts b/src/arm/imx7d-cl-som-imx7.dts
index 48634519d13a..58b09bf1ba2d 100644
--- a/src/arm/imx7d-cl-som-imx7.dts
+++ b/src/arm/imx7d-cl-som-imx7.dts
@@ -12,7 +12,6 @@
 
 /dts-v1/;
 
-#include <dt-bindings/input/input.h>
 #include "imx7d.dtsi"
 
 / {
diff --git a/src/arm/imx7d-colibri-eval-v3.dts b/src/arm/imx7d-colibri-eval-v3.dts
new file mode 100644
index 000000000000..bd01d2cc642d
--- /dev/null
+++ b/src/arm/imx7d-colibri-eval-v3.dts
@@ -0,0 +1,66 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx7d-eval-v3", "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg2_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	status = "okay";
+};
diff --git a/src/arm/imx7d-colibri.dtsi b/src/arm/imx7d-colibri.dtsi
new file mode 100644
index 000000000000..3c2cb502b388
--- /dev/null
+++ b/src/arm/imx7d-colibri.dtsi
@@ -0,0 +1,54 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx7d.dtsi"
+#include "imx7-colibri.dtsi"
+
+/ {
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&usbotg2 {
+	dr_mode = "host";
+};
diff --git a/src/arm/imx7d-nitrogen7.dts b/src/arm/imx7d-nitrogen7.dts
index 1ce97800f0c5..ce08f180f213 100644
--- a/src/arm/imx7d-nitrogen7.dts
+++ b/src/arm/imx7d-nitrogen7.dts
@@ -42,7 +42,6 @@
 
 /dts-v1/;
 
-#include <dt-bindings/input/input.h>
 #include "imx7d.dtsi"
 
 / {
@@ -392,7 +391,7 @@
 	pinctrl-0 = <&pinctrl_uart6>;
 	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
 	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/src/arm/imx7d-pinfunc.h b/src/arm/imx7d-pinfunc.h
index eeda78347619..7bc3c00e56c6 100644
--- a/src/arm/imx7d-pinfunc.h
+++ b/src/arm/imx7d-pinfunc.h
@@ -43,26 +43,30 @@
 #define MX7D_PAD_GPIO1_IO04__GPIO1_IO4                            0x0010 0x0040 0x0000 0x0 0x0
 #define MX7D_PAD_GPIO1_IO04__USB_OTG1_OC                          0x0010 0x0040 0x072C 0x1 0x1
 #define MX7D_PAD_GPIO1_IO04__FLEXTIMER1_CH4                       0x0010 0x0040 0x0594 0x2 0x1
-#define MX7D_PAD_GPIO1_IO04__UART5_CTS_B                          0x0010 0x0040 0x0710 0x3 0x4
+#define MX7D_PAD_GPIO1_IO04__UART5_DCE_CTS                        0x0010 0x0040 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO04__UART5_DTE_RTS                        0x0010 0x0040 0x0710 0x3 0x4
 #define MX7D_PAD_GPIO1_IO04__I2C1_SCL                             0x0010 0x0040 0x05D4 0x4 0x2
 #define MX7D_PAD_GPIO1_IO04__OBSERVE3_OUT                         0x0010 0x0040 0x0000 0x6 0x0
 #define MX7D_PAD_GPIO1_IO05__GPIO1_IO5                            0x0014 0x0044 0x0000 0x0 0x0
 #define MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR                         0x0014 0x0044 0x0000 0x1 0x0
 #define MX7D_PAD_GPIO1_IO05__FLEXTIMER1_CH5                       0x0014 0x0044 0x0598 0x2 0x1
-#define MX7D_PAD_GPIO1_IO05__UART5_RTS_B                          0x0014 0x0044 0x0710 0x3 0x5
+#define MX7D_PAD_GPIO1_IO05__UART5_DCE_RTS                        0x0014 0x0044 0x0710 0x3 0x5
+#define MX7D_PAD_GPIO1_IO05__UART5_DTE_CTS                        0x0014 0x0044 0x0000 0x3 0x0
 #define MX7D_PAD_GPIO1_IO05__I2C1_SDA                             0x0014 0x0044 0x05D8 0x4 0x2
 #define MX7D_PAD_GPIO1_IO05__OBSERVE4_OUT                         0x0014 0x0044 0x0000 0x6 0x0
 #define MX7D_PAD_GPIO1_IO06__GPIO1_IO6                            0x0018 0x0048 0x0000 0x0 0x0
 #define MX7D_PAD_GPIO1_IO06__USB_OTG2_OC                          0x0018 0x0048 0x0728 0x1 0x1
 #define MX7D_PAD_GPIO1_IO06__FLEXTIMER1_CH6                       0x0018 0x0048 0x059C 0x2 0x1
-#define MX7D_PAD_GPIO1_IO06__UART5_RX_DATA                        0x0018 0x0048 0x0714 0x3 0x4
+#define MX7D_PAD_GPIO1_IO06__UART5_DCE_RX                         0x0018 0x0048 0x0714 0x3 0x4
+#define MX7D_PAD_GPIO1_IO06__UART5_DTE_TX                         0x0018 0x0048 0x0000 0x3 0x0
 #define MX7D_PAD_GPIO1_IO06__I2C2_SCL                             0x0018 0x0048 0x05DC 0x4 0x2
 #define MX7D_PAD_GPIO1_IO06__CCM_WAIT                             0x0018 0x0048 0x0000 0x5 0x0
 #define MX7D_PAD_GPIO1_IO06__KPP_ROW4                             0x0018 0x0048 0x0624 0x6 0x1
 #define MX7D_PAD_GPIO1_IO07__GPIO1_IO7                            0x001C 0x004C 0x0000 0x0 0x0
 #define MX7D_PAD_GPIO1_IO07__USB_OTG2_PWR                         0x001C 0x004C 0x0000 0x1 0x0
 #define MX7D_PAD_GPIO1_IO07__FLEXTIMER1_CH7                       0x001C 0x004C 0x05A0 0x2 0x1
-#define MX7D_PAD_GPIO1_IO07__UART5_TX_DATA                        0x001C 0x004C 0x0714 0x3 0x5
+#define MX7D_PAD_GPIO1_IO07__UART5_DCE_TX                         0x001C 0x004C 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO07__UART5_DTE_RX                         0x001C 0x004C 0x0714 0x3 0x5
 #define MX7D_PAD_GPIO1_IO07__I2C2_SDA                             0x001C 0x004C 0x05E0 0x4 0x2
 #define MX7D_PAD_GPIO1_IO07__CCM_STOP                             0x001C 0x004C 0x0000 0x5 0x0
 #define MX7D_PAD_GPIO1_IO07__KPP_COL4                             0x001C 0x004C 0x0604 0x6 0x1
@@ -594,7 +598,7 @@
 #define MX7D_PAD_UART2_RX_DATA__GPIO4_IO2                         0x0130 0x03A0 0x0000 0x5 0x0
 #define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO                        0x0130 0x03A0 0x0000 0x6 0x0
 #define MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX                      0x0134 0x03A4 0x0000 0x0 0x0
-#define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX                      0x0134 0x03A4 0x0000 0x0 0x0
+#define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX                      0x0134 0x03A4 0x06FC 0x0 0x3
 #define MX7D_PAD_UART2_TX_DATA__I2C2_SDA                          0x0134 0x03A4 0x05E0 0x1 0x0
 #define MX7D_PAD_UART2_TX_DATA__SAI3_RX_DATA0                     0x0134 0x03A4 0x06C8 0x2 0x0
 #define MX7D_PAD_UART2_TX_DATA__ECSPI1_RDY                        0x0134 0x03A4 0x0000 0x3 0x0
diff --git a/src/arm/imx7d-sdb.dts b/src/arm/imx7d-sdb.dts
index b267f79e3059..2f33c463cbce 100644
--- a/src/arm/imx7d-sdb.dts
+++ b/src/arm/imx7d-sdb.dts
@@ -42,7 +42,6 @@
 
 /dts-v1/;
 
-#include <dt-bindings/input/input.h>
 #include "imx7d.dtsi"
 
 / {
@@ -111,6 +110,32 @@
 	arm-supply = <&sw1a_reg>;
 };
 
+&ecspi3 {
+	fsl,spi-num-chipselects = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	tsc2046@0 {
+		compatible = "ti,tsc2046";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		pinctrl-names ="default";
+		pinctrl-0 = <&pinctrl_tsc2046_pendown>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <29 0>;
+		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		ti,x-min = /bits/ 16 <0>;
+		ti,x-max = /bits/ 16 <0>;
+		ti,y-min = /bits/ 16 <0>;
+		ti,y-max = /bits/ 16 <0>;
+		ti,pressure-max = /bits/ 16 <0>;
+		ti,x-plate-ohms = /bits/ 16 <400>;
+		wakeup-source;
+	};
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
@@ -272,6 +297,44 @@
 	};
 };
 
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display {
+		bits-per-pixel = <16>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+
+			timing0: timing0 {
+				clock-frequency = <9200000>;
+				hactive = <480>;
+				vactive = <272>;
+				hfront-porch = <8>;
+				hback-porch = <4>;
+				hsync-len = <41>;
+				vback-porch = <2>;
+				vfront-porch = <4>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
@@ -314,11 +377,26 @@
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
 	imx7d-sdb {
+		pinctrl_ecspi3: ecspi3grp {
+			fsl,pins = <
+				MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO	0x2
+				MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI	0x2
+				MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK	0x2
+				MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x59
+			>;
+		};
+
 		pinctrl_enet1: enet1grp {
 			fsl,pins = <
 				MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x3
@@ -390,6 +468,52 @@
 			>;
 		};
 
+		pinctrl_lcdif: lcdifgrp {
+			fsl,pins = <
+				MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+				MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+				MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+				MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+				MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+				MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+				MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+				MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+				MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+				MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+				MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+				MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+				MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+				MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+				MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+				MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+				MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
+				MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+				MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
+				MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
+				MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
+				MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
+				MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
+				MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+				MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+				MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
+				MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+				MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+				MX7D_PAD_LCD_RESET__LCD_RESET		0x79
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX7D_PAD_GPIO1_IO01__PWM1_OUT		0x110b0
+			>;
+		};
+
+		pinctrl_tsc2046_pendown: tsc2046_pendown {
+			fsl,pins = <
+				MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x59
+			>;
+		};
+
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
@@ -512,5 +636,10 @@
 			>;
 		};
 
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B	0x74
+			>;
+		};
 	};
 };
diff --git a/src/arm/imx7d.dtsi b/src/arm/imx7d.dtsi
index 6b3faa298417..f6dee41a05d9 100644
--- a/src/arm/imx7d.dtsi
+++ b/src/arm/imx7d.dtsi
@@ -1,5 +1,6 @@
 /*
  * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2016 Toradex AG
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -40,916 +41,100 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include <dt-bindings/clock/imx7d-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "imx7d-pinfunc.h"
-#include "skeleton.dtsi"
+#include "imx7s.dtsi"
 
 / {
-	aliases {
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		gpio5 = &gpio6;
-		gpio6 = &gpio7;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		i2c3 = &i2c4;
-		mmc0 = &usdhc1;
-		mmc1 = &usdhc2;
-		mmc2 = &usdhc3;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-		serial6 = &uart7;
-	};
-
 	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		cpu0: cpu@0 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0>;
 			operating-points = <
 				/* KHz	uV */
 				996000	1075000
 				792000	975000
 			>;
-			clock-latency = <61036>; /* two CLK32 periods */
-			clocks = <&clks IMX7D_CLK_ARM>;
+			clock-frequency = <996000000>;
 		};
 
 		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <1>;
+			clock-frequency = <996000000>;
 		};
 	};
 
-	intc: interrupt-controller@31001000 {
-		compatible = "arm,cortex-a7-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x31001000 0x1000>,
-		      <0x31002000 0x1000>,
-		      <0x31004000 0x2000>,
-		      <0x31006000 0x2000>;
-	};
-
-	ckil: clock-cki {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "ckil";
-	};
-
-	osc: clock-osc {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-output-names = "osc";
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		interrupt-parent = <&intc>;
-	};
-
-	etr@30086000 {
-		compatible = "arm,coresight-tmc", "arm,primecell";
-		reg = <0x30086000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		port {
-			etr_in_port: endpoint {
-				slave-mode;
-				remote-endpoint = <&replicator_out_port1>;
-			};
-		};
-	};
-
-	tpiu@30087000 {
-		compatible = "arm,coresight-tpiu", "arm,primecell";
-		reg = <0x30087000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		port {
-			tpiu_in_port: endpoint {
-				slave-mode;
-				remote-endpoint = <&replicator_out_port1>;
-			};
-		};
-	};
-
-	replicator {
-		/*
-		 * non-configurable replicators don't show up on the
-		 * AMBA bus.  As such no need to add "arm,primecell"
-		 */
-		compatible = "arm,coresight-replicator";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* replicator output ports */
-			port@0 {
-				reg = <0>;
-				replicator_out_port0: endpoint {
-					remote-endpoint = <&tpiu_in_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				replicator_out_port1: endpoint {
-					remote-endpoint = <&etr_in_port>;
-				};
-			};
-
-			/* replicator input port */
-			port@2 {
-				reg = <0>;
-				replicator_in_port0: endpoint {
-					slave-mode;
-					remote-endpoint = <&etf_out_port>;
-				};
-			};
-		};
-	};
-
-	etf@30084000 {
-		compatible = "arm,coresight-tmc", "arm,primecell";
-		reg = <0x30084000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				etf_in_port: endpoint {
-					slave-mode;
-					remote-endpoint = <&hugo_funnel_out_port0>;
-				};
-			};
-
-			port@1 {
-				reg = <0>;
-				etf_out_port: endpoint {
-					remote-endpoint = <&replicator_in_port0>;
+	soc {
+		etm@3007d000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x3007d000 0x1000>;
+
+			/*
+			 * System will hang if added nosmp in kernel command line
+			 * without arm,primecell-periphid because amba bus try to
+			 * read id and core1 power off at this time.
+			 */
+			arm,primecell-periphid = <0xbb956>;
+			cpu = <&cpu1>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			port {
+				etm1_out_port: endpoint {
+					remote-endpoint = <&ca_funnel_in_port1>;
 				};
 			};
 		};
 	};
+};
 
-	funnel@30083000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
-		reg = <0x30083000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel input ports */
-			port@0 {
-				reg = <0>;
-				hugo_funnel_in_port0: endpoint {
-					slave-mode;
-					remote-endpoint = <&ca_funnel_out_port0>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				hugo_funnel_in_port1: endpoint {
-					slave-mode; /* M4 input */
-				};
-			};
-
-			port@2 {
-				reg = <0>;
-				hugo_funnel_out_port0: endpoint {
-					remote-endpoint = <&etf_in_port>;
-				};
-			};
-
-			/* the other input ports are not connect to anything */
-		};
+&aips3 {
+	usbotg2: usb@30b20000 {
+		compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+		reg = <0x30b20000 0x200>;
+		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX7D_USB_CTRL_CLK>;
+		fsl,usbphy = <&usbphynop2>;
+		fsl,usbmisc = <&usbmisc2 0>;
+		phy-clkgate-delay-us = <400>;
+		status = "disabled";
 	};
 
-	funnel@30041000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
-		reg = <0x30041000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel input ports */
-			port@0 {
-				reg = <0>;
-				ca_funnel_in_port0: endpoint {
-					slave-mode;
-					remote-endpoint = <&etm0_out_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				ca_funnel_in_port1: endpoint {
-					slave-mode;
-					remote-endpoint = <&etm1_out_port>;
-				};
-			};
-
-			/* funnel output port */
-			port@2 {
-				reg = <0>;
-				ca_funnel_out_port0: endpoint {
-					remote-endpoint = <&hugo_funnel_in_port0>;
-				};
-			};
-
-			/* the other input ports are not connect to anything */
-		};
+	usbmisc2: usbmisc@30b20200 {
+		#index-cells = <1>;
+		compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+		reg = <0x30b20200 0x200>;
 	};
 
-	etm@3007c000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0x3007c000 0x1000>;
-		cpu = <&cpu0>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		port {
-			etm0_out_port: endpoint {
-				remote-endpoint = <&ca_funnel_in_port0>;
-			};
-		};
+	usbphynop2: usbphynop2 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX7D_USB_PHY2_CLK>;
+		clock-names = "main_clk";
 	};
 
-	etm@3007d000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0x3007d000 0x1000>;
-
-		/*
-		 * System will hang if added nosmp in kernel command line
-		 * without arm,primecell-periphid because amba bus try to
-		 * read id and core1 power off at this time.
-		 */
-		arm,primecell-periphid = <0xbb956>;
-		cpu = <&cpu1>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		port {
-			etm1_out_port: endpoint {
-				remote-endpoint = <&ca_funnel_in_port1>;
-			};
-		};
+	fec2: ethernet@30bf0000 {
+		compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+		reg = <0x30bf0000 0x10000>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+			<&clks IMX7D_ENET_AXI_ROOT_CLK>,
+			<&clks IMX7D_ENET2_TIME_ROOT_CLK>,
+			<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+			<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+		clock-names = "ipg", "ahb", "ptp",
+			"enet_clk_ref", "enet_out";
+		fsl,num-tx-queues=<3>;
+		fsl,num-rx-queues=<3>;
+		status = "disabled";
 	};
+};
 
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		aips1: aips-bus@30000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x30000000 0x400000>;
-			ranges;
-
-			gpio1: gpio@30200000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30200000 0x10000>;
-				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
-					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@30210000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30210000 0x10000>;
-				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio3: gpio@30220000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30220000 0x10000>;
-				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio4: gpio@30230000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30230000 0x10000>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio5: gpio@30240000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30240000 0x10000>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio6: gpio@30250000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30250000 0x10000>;
-				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio7: gpio@30260000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30260000 0x10000>;
-				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			wdog1: wdog@30280000 {
-				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
-				reg = <0x30280000 0x10000>;
-				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
-			};
-
-			wdog2: wdog@30290000 {
-				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
-				reg = <0x30290000 0x10000>;
-				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_WDOG2_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			wdog3: wdog@302a0000 {
-				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
-				reg = <0x302a0000 0x10000>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_WDOG3_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			wdog4: wdog@302b0000 {
-				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
-				reg = <0x302b0000 0x10000>;
-				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_WDOG4_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			iomuxc_lpsr: iomuxc-lpsr@302c0000 {
-				compatible = "fsl,imx7d-iomuxc-lpsr";
-				reg = <0x302c0000 0x10000>;
-				fsl,input-sel = <&iomuxc>;
-			};
-
-			gpt1: gpt@302d0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x302d0000 0x10000>;
-				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_GPT1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-			};
-
-			gpt2: gpt@302e0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x302e0000 0x10000>;
-				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_GPT2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			gpt3: gpt@302f0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x302f0000 0x10000>;
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_GPT3_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			gpt4: gpt@30300000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x30300000 0x10000>;
-				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_GPT4_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			iomuxc: iomuxc@30330000 {
-				compatible = "fsl,imx7d-iomuxc";
-				reg = <0x30330000 0x10000>;
-			};
-
-			gpr: iomuxc-gpr@30340000 {
-				compatible = "fsl,imx7d-iomuxc-gpr", "syscon";
-				reg = <0x30340000 0x10000>;
-			};
-
-			ocotp: ocotp-ctrl@30350000 {
-				compatible = "syscon";
-				reg = <0x30350000 0x10000>;
-				clocks = <&clks IMX7D_CLK_DUMMY>;
-				status = "disabled";
-			};
-
-			anatop: anatop@30360000 {
-				compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
-					"syscon", "simple-bus";
-				reg = <0x30360000 0x10000>;
-				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-
-				reg_1p0d: regulator-vdd1p0d@210 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd1p0d";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1200000>;
-					anatop-reg-offset = <0x210>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <8>;
-					anatop-min-voltage = <800000>;
-					anatop-max-voltage = <1200000>;
-					anatop-enable-bit = <31>;
-				};
-			};
-
-			snvs: snvs@30370000 {
-				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
-				reg = <0x30370000 0x10000>;
-
-				snvs_rtc: snvs-rtc-lp {
-					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					regmap = <&snvs>;
-					offset = <0x34>;
-					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				snvs_poweroff: snvs-poweroff {
-					compatible = "syscon-poweroff";
-					regmap = <&snvs>;
-					offset = <0x38>;
-					mask = <0x60>;
-				};
-
-				snvs_pwrkey: snvs-powerkey {
-					compatible = "fsl,sec-v4.0-pwrkey";
-					regmap = <&snvs>;
-					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-					linux,keycode = <KEY_POWER>;
-					wakeup-source;
-				};
-			};
-
-			clks: ccm@30380000 {
-				compatible = "fsl,imx7d-ccm";
-				reg = <0x30380000 0x10000>;
-				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				#clock-cells = <1>;
-				clocks = <&ckil>, <&osc>;
-				clock-names = "ckil", "osc";
-			};
-
-			src: src@30390000 {
-				compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon";
-				reg = <0x30390000 0x10000>;
-				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-				#reset-cells = <1>;
-			};
-		};
-
-		aips2: aips-bus@30400000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x30400000 0x400000>;
-			ranges;
-
-			adc1: adc@30610000 {
-				compatible = "fsl,imx7d-adc";
-				reg = <0x30610000 0x10000>;
-				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
-				clock-names = "adc";
-				status = "disabled";
-			};
-
-			adc2: adc@30620000 {
-				compatible = "fsl,imx7d-adc";
-				reg = <0x30620000 0x10000>;
-				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
-				clock-names = "adc";
-				status = "disabled";
-			};
-
-			pwm1: pwm@30660000 {
-				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
-				reg = <0x30660000 0x10000>;
-				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
-					 <&clks IMX7D_PWM1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-				status = "disabled";
-			};
-
-			pwm2: pwm@30670000 {
-				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
-				reg = <0x30670000 0x10000>;
-				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
-					 <&clks IMX7D_PWM2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-				status = "disabled";
-			};
-
-			pwm3: pwm@30680000 {
-				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
-				reg = <0x30680000 0x10000>;
-				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
-					 <&clks IMX7D_PWM3_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-				status = "disabled";
-			};
-
-			pwm4: pwm@30690000 {
-				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
-				reg = <0x30690000 0x10000>;
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
-					 <&clks IMX7D_PWM4_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-				status = "disabled";
-			};
-
-			lcdif: lcdif@30730000 {
-				compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
-				reg = <0x30730000 0x10000>;
-				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
-					<&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>;
-				clock-names = "pix", "axi", "disp_axi";
-				status = "disabled";
-			};
-		};
-
-		aips3: aips-bus@30800000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x30800000 0x400000>;
-			ranges;
-
-			uart1: serial@30860000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30860000 0x10000>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART1_ROOT_CLK>,
-					<&clks IMX7D_UART1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart2: serial@30890000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30890000 0x10000>;
-				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART2_ROOT_CLK>,
-					<&clks IMX7D_UART2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart3: serial@30880000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30880000 0x10000>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART3_ROOT_CLK>,
-					<&clks IMX7D_UART3_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			flexcan1: can@30a00000 {
-				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
-				reg = <0x30a00000 0x10000>;
-				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CAN1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			flexcan2: can@30a10000 {
-				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
-				reg = <0x30a10000 0x10000>;
-				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CAN2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			i2c1: i2c@30a20000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a20000 0x10000>;
-				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@30a30000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a30000 0x10000>;
-				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@30a40000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a40000 0x10000>;
-				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			i2c4: i2c@30a50000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a50000 0x10000>;
-				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			uart4: serial@30a60000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a60000 0x10000>;
-				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART4_ROOT_CLK>,
-					<&clks IMX7D_UART4_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart5: serial@30a70000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a70000 0x10000>;
-				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART5_ROOT_CLK>,
-					<&clks IMX7D_UART5_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart6: serial@30a80000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a80000 0x10000>;
-				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART6_ROOT_CLK>,
-					<&clks IMX7D_UART6_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart7: serial@30a90000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a90000 0x10000>;
-				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART7_ROOT_CLK>,
-					<&clks IMX7D_UART7_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			usbotg1: usb@30b10000 {
-				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
-				reg = <0x30b10000 0x200>;
-				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_USB_CTRL_CLK>;
-				fsl,usbphy = <&usbphynop1>;
-				fsl,usbmisc = <&usbmisc1 0>;
-				phy-clkgate-delay-us = <400>;
-				status = "disabled";
-			};
-
-			usbotg2: usb@30b20000 {
-				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
-				reg = <0x30b20000 0x200>;
-				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_USB_CTRL_CLK>;
-				fsl,usbphy = <&usbphynop2>;
-				fsl,usbmisc = <&usbmisc2 0>;
-				phy-clkgate-delay-us = <400>;
-				status = "disabled";
-			};
-
-			usbh: usb@30b30000 {
-				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
-				reg = <0x30b30000 0x200>;
-				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_USB_CTRL_CLK>;
-				fsl,usbphy = <&usbphynop3>;
-				fsl,usbmisc = <&usbmisc3 0>;
-				phy_type = "hsic";
-				dr_mode = "host";
-				phy-clkgate-delay-us = <400>;
-				status = "disabled";
-			};
-
-			usbmisc1: usbmisc@30b10200 {
-				#index-cells = <1>;
-				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
-				reg = <0x30b10200 0x200>;
-			};
-
-			usbmisc2: usbmisc@30b20200 {
-				#index-cells = <1>;
-				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
-				reg = <0x30b20200 0x200>;
-			};
-
-			usbmisc3: usbmisc@30b30200 {
-				#index-cells = <1>;
-				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
-				reg = <0x30b30200 0x200>;
-			};
-
-			usbphynop1: usbphynop1 {
-				compatible = "usb-nop-xceiv";
-				clocks = <&clks IMX7D_USB_PHY1_CLK>;
-				clock-names = "main_clk";
-			};
-
-			usbphynop2: usbphynop2 {
-				compatible = "usb-nop-xceiv";
-				clocks = <&clks IMX7D_USB_PHY2_CLK>;
-				clock-names = "main_clk";
-			};
-
-			usbphynop3: usbphynop3 {
-				compatible = "usb-nop-xceiv";
-				clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
-				clock-names = "main_clk";
-			};
-
-			usdhc1: usdhc@30b40000 {
-				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x30b40000 0x10000>;
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_USDHC1_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc2: usdhc@30b50000 {
-				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x30b50000 0x10000>;
-				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_USDHC2_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc3: usdhc@30b60000 {
-				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x30b60000 0x10000>;
-				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_USDHC3_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			fec1: ethernet@30be0000 {
-				compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
-				reg = <0x30be0000 0x10000>;
-				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
-					<&clks IMX7D_ENET_AXI_ROOT_CLK>,
-					<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
-					<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
-					<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "ptp",
-					"enet_clk_ref", "enet_out";
-				fsl,num-tx-queues=<3>;
-				fsl,num-rx-queues=<3>;
-				status = "disabled";
-			};
-
-			fec2: ethernet@30bf0000 {
-				compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
-				reg = <0x30bf0000 0x10000>;
-				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
-					<&clks IMX7D_ENET_AXI_ROOT_CLK>,
-					<&clks IMX7D_ENET2_TIME_ROOT_CLK>,
-					<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
-					<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "ptp",
-					"enet_clk_ref", "enet_out";
-				fsl,num-tx-queues=<3>;
-				fsl,num-rx-queues=<3>;
-				status = "disabled";
-			};
+&ca_funnel_ports {
+	port@1 {
+		reg = <1>;
+		ca_funnel_in_port1: endpoint {
+			slave-mode;
+			remote-endpoint = <&etm1_out_port>;
 		};
 	};
 };
diff --git a/src/arm/imx7s-colibri-eval-v3.dts b/src/arm/imx7s-colibri-eval-v3.dts
new file mode 100644
index 000000000000..bd2a49c1ade6
--- /dev/null
+++ b/src/arm/imx7s-colibri-eval-v3.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx7s-colibri.dtsi"
+#include "imx7-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7S on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx7s-eval-v3", "toradex,colibri-imx7s",
+		     "fsl,imx7s";
+};
diff --git a/src/arm/imx7s-colibri.dtsi b/src/arm/imx7s-colibri.dtsi
new file mode 100644
index 000000000000..b81013455b21
--- /dev/null
+++ b/src/arm/imx7s-colibri.dtsi
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx7s.dtsi"
+#include "imx7-colibri.dtsi"
+
+/ {
+	memory {
+		reg = <0x80000000 0x10000000>;
+	};
+};
diff --git a/src/arm/imx7s-warp.dts b/src/arm/imx7s-warp.dts
new file mode 100644
index 000000000000..0345267f3390
--- /dev/null
+++ b/src/arm/imx7s-warp.dts
@@ -0,0 +1,446 @@
+/*
+ * Copyright (C) 2016 NXP Semiconductors.
+ * Author: Fabio Estevam <fabio.estevam@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx7s.dtsi"
+
+/ {
+	model = "Warp i.MX7 Board";
+	compatible = "warp,imx7s-warp", "fsl,imx7s";
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pinctrl_gpio>;
+		autorepeat;
+
+		back {
+			label = "Back";
+			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
+		};
+	};
+
+	reg_brcm: regulator-brcm {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+
+	reg_bt: regulator-bt {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt_reg>;
+		enable-active-high;
+		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		regulator-name = "bt_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx7-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		};
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <884736000>;
+};
+
+&cpu0 {
+	arm-supply = <&sw1a_reg>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze3000@08 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sai1_mclk>;
+		VDDA-supply = <&vgen4_reg>;
+		VDDIO-supply = <&vgen4_reg>;
+		VDDD-supply = <&vgen2_reg>;
+	};
+
+	mpl3115@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+			  <&clks IMX7D_SAI1_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <36864000>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&uart3  {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_brcm>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_brcm_reg: brcmreggrp {
+		fsl,pins = <
+			MX7D_PAD_SD2_WP__GPIO5_IO10	0x14 /* WL_REG_ON */
+		>;
+	};
+
+	pinctrl_bt_reg: btreggrp {
+		fsl,pins = <
+			MX7D_PAD_SD2_DATA3__GPIO5_IO17	0x14 /* BT_REG_ON */
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1	0x14
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA	0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SCL__I2C4_SCL	0x4000007f
+			MX7D_PAD_I2C4_SDA__I2C4_SDA	0x4000007f
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0	0x1f
+			MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK	0x1f
+			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
+			MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0	0x30
+		>;
+	};
+
+	pinctrl_sai1_mclk: sai1mclkgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x79
+			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x79
+			MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS	0x79
+			MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS	0x79
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD	0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK	0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x59
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* WL_HOST_WAKE */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x19
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x1a
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x1b
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B	0x74
+		>;
+	};
+};
diff --git a/src/arm/imx7s.dtsi b/src/arm/imx7s.dtsi
new file mode 100644
index 000000000000..be33dfc86838
--- /dev/null
+++ b/src/arm/imx7s.dtsi
@@ -0,0 +1,1001 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/imx7d-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx7d-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <792000000>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX7D_CLK_ARM>;
+		};
+	};
+
+	ckil: clock-cki {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc: clock-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		funnel@30041000 {
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0x30041000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			ca_funnel_ports: ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* funnel input ports */
+				port@0 {
+					reg = <0>;
+					ca_funnel_in_port0: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm0_out_port>;
+					};
+				};
+
+				/* funnel output port */
+				port@2 {
+					reg = <0>;
+					ca_funnel_out_port0: endpoint {
+						remote-endpoint = <&hugo_funnel_in_port0>;
+					};
+				};
+
+				/* the other input ports are not connect to anything */
+			};
+		};
+
+		etm@3007c000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x3007c000 0x1000>;
+			cpu = <&cpu0>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			port {
+				etm0_out_port: endpoint {
+					remote-endpoint = <&ca_funnel_in_port0>;
+				};
+			};
+		};
+
+		funnel@30083000 {
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0x30083000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* funnel input ports */
+				port@0 {
+					reg = <0>;
+					hugo_funnel_in_port0: endpoint {
+						slave-mode;
+						remote-endpoint = <&ca_funnel_out_port0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					hugo_funnel_in_port1: endpoint {
+						slave-mode; /* M4 input */
+					};
+				};
+
+				port@2 {
+					reg = <0>;
+					hugo_funnel_out_port0: endpoint {
+						remote-endpoint = <&etf_in_port>;
+					};
+				};
+
+				/* the other input ports are not connect to anything */
+			};
+		};
+
+		etf@30084000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x30084000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					etf_in_port: endpoint {
+						slave-mode;
+						remote-endpoint = <&hugo_funnel_out_port0>;
+					};
+				};
+
+				port@1 {
+					reg = <0>;
+					etf_out_port: endpoint {
+						remote-endpoint = <&replicator_in_port0>;
+					};
+				};
+			};
+		};
+
+		etr@30086000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x30086000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			port {
+				etr_in_port: endpoint {
+					slave-mode;
+					remote-endpoint = <&replicator_out_port1>;
+				};
+			};
+		};
+
+		tpiu@30087000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0x30087000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			port {
+				tpiu_in_port: endpoint {
+					slave-mode;
+					remote-endpoint = <&replicator_out_port1>;
+				};
+			};
+		};
+
+		replicator {
+			/*
+			 * non-configurable replicators don't show up on the
+			 * AMBA bus.  As such no need to add "arm,primecell"
+			 */
+			compatible = "arm,coresight-replicator";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* replicator output ports */
+				port@0 {
+					reg = <0>;
+					replicator_out_port0: endpoint {
+						remote-endpoint = <&tpiu_in_port>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					replicator_out_port1: endpoint {
+						remote-endpoint = <&etr_in_port>;
+					};
+				};
+
+				/* replicator input port */
+				port@2 {
+					reg = <0>;
+					replicator_in_port0: endpoint {
+						slave-mode;
+						remote-endpoint = <&etf_out_port>;
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@31001000 {
+			compatible = "arm,cortex-a7-gic";
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x31001000 0x1000>,
+			      <0x31002000 0x2000>,
+			      <0x31004000 0x2000>,
+			      <0x31006000 0x2000>;
+		};
+
+		timer {
+			compatible = "arm,armv7-timer";
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		aips1: aips-bus@30000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x30000000 0x400000>;
+			ranges;
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc_lpsr 0 0 8>, <&iomuxc 8 5 8>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 13 32>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 45 29>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 74 24>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 98 18>;
+			};
+
+			gpio6: gpio@30250000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30250000 0x10000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 116 23>;
+			};
+
+			gpio7: gpio@30260000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30260000 0x10000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 139 16>;
+			};
+
+			wdog1: wdog@30280000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
+			};
+
+			wdog2: wdog@30290000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x30290000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG2_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			wdog3: wdog@302a0000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x302a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG3_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			wdog4: wdog@302b0000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x302b0000 0x10000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG4_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			iomuxc_lpsr: iomuxc-lpsr@302c0000 {
+				compatible = "fsl,imx7d-iomuxc-lpsr";
+				reg = <0x302c0000 0x10000>;
+				fsl,input-sel = <&iomuxc>;
+			};
+
+			gpt1: gpt@302d0000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x302d0000 0x10000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_GPT1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt2: gpt@302e0000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x302e0000 0x10000>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_GPT2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			gpt3: gpt@302f0000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x302f0000 0x10000>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_GPT3_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			gpt4: gpt@30300000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x30300000 0x10000>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_GPT4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			iomuxc: iomuxc@30330000 {
+				compatible = "fsl,imx7d-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			gpr: iomuxc-gpr@30340000 {
+				compatible = "fsl,imx7d-iomuxc-gpr", "syscon";
+				reg = <0x30340000 0x10000>;
+			};
+
+			ocotp: ocotp-ctrl@30350000 {
+				compatible = "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clks IMX7D_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			anatop: anatop@30360000 {
+				compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
+					"syscon", "simple-bus";
+				reg = <0x30360000 0x10000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+				reg_1p0d: regulator-vdd1p0d {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd1p0d";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1200000>;
+					anatop-reg-offset = <0x210>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <8>;
+					anatop-min-voltage = <800000>;
+					anatop-max-voltage = <1200000>;
+					anatop-enable-bit = <31>;
+				};
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+				};
+			};
+
+			clks: ccm@30380000 {
+				compatible = "fsl,imx7d-ccm";
+				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>;
+				clock-names = "ckil", "osc";
+			};
+
+			src: src@30390000 {
+				compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+		};
+
+		aips2: aips-bus@30400000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x30400000 0x400000>;
+			ranges;
+
+			adc1: adc@30610000 {
+				compatible = "fsl,imx7d-adc";
+				reg = <0x30610000 0x10000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+				clock-names = "adc";
+				status = "disabled";
+			};
+
+			adc2: adc@30620000 {
+				compatible = "fsl,imx7d-adc";
+				reg = <0x30620000 0x10000>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+				clock-names = "adc";
+				status = "disabled";
+			};
+
+			ecspi4: ecspi@30630000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30630000 0x10000>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
+					<&clks IMX7D_ECSPI4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
+					 <&clks IMX7D_PWM1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
+					 <&clks IMX7D_PWM2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
+					 <&clks IMX7D_PWM3_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
+					 <&clks IMX7D_PWM4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			lcdif: lcdif@30730000 {
+				compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
+				reg = <0x30730000 0x10000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
+					<&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>;
+				clock-names = "pix", "axi";
+				status = "disabled";
+			};
+		};
+
+		aips3: aips-bus@30800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x30800000 0x400000>;
+			ranges;
+
+			ecspi1: ecspi@30820000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30820000 0x10000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
+					<&clks IMX7D_ECSPI1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			ecspi2: ecspi@30830000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30830000 0x10000>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
+					<&clks IMX7D_ECSPI2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			ecspi3: ecspi@30840000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30840000 0x10000>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
+					<&clks IMX7D_ECSPI3_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart1: serial@30860000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30860000 0x10000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART1_ROOT_CLK>,
+					<&clks IMX7D_UART1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@30890000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30890000 0x10000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART2_ROOT_CLK>,
+					<&clks IMX7D_UART2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart3: serial@30880000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30880000 0x10000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART3_ROOT_CLK>,
+					<&clks IMX7D_UART3_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			sai1: sai@308a0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+				reg = <0x308a0000 0x10000>;
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_SAI1_IPG_CLK>,
+					 <&clks IMX7D_SAI1_ROOT_CLK>,
+					 <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&sdma 8 24 0>, <&sdma 9 24 0>;
+				status = "disabled";
+			};
+
+			sai2: sai@308b0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+				reg = <0x308b0000 0x10000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_SAI2_IPG_CLK>,
+					 <&clks IMX7D_SAI2_ROOT_CLK>,
+					 <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&sdma 10 24 0>, <&sdma 11 24 0>;
+				status = "disabled";
+			};
+
+			sai3: sai@308c0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+				reg = <0x308c0000 0x10000>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_SAI3_IPG_CLK>,
+					 <&clks IMX7D_SAI3_ROOT_CLK>,
+					 <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&sdma 12 24 0>, <&sdma 13 24 0>;
+				status = "disabled";
+			};
+
+			flexcan1: can@30a00000 {
+				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x30a00000 0x10000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CAN1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			flexcan2: can@30a10000 {
+				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x30a10000 0x10000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CAN2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c1: i2c@30a20000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART4_ROOT_CLK>,
+					<&clks IMX7D_UART4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart5: serial@30a70000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a70000 0x10000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART5_ROOT_CLK>,
+					<&clks IMX7D_UART5_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart6: serial@30a80000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a80000 0x10000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART6_ROOT_CLK>,
+					<&clks IMX7D_UART6_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart7: serial@30a90000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a90000 0x10000>;
+				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART7_ROOT_CLK>,
+					<&clks IMX7D_UART7_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			usbotg1: usb@30b10000 {
+				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x30b10000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_USB_CTRL_CLK>;
+				fsl,usbphy = <&usbphynop1>;
+				fsl,usbmisc = <&usbmisc1 0>;
+				phy-clkgate-delay-us = <400>;
+				status = "disabled";
+			};
+
+			usbh: usb@30b30000 {
+				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x30b30000 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_USB_CTRL_CLK>;
+				fsl,usbphy = <&usbphynop3>;
+				fsl,usbmisc = <&usbmisc3 0>;
+				phy_type = "hsic";
+				dr_mode = "host";
+				phy-clkgate-delay-us = <400>;
+				status = "disabled";
+			};
+
+			usbmisc1: usbmisc@30b10200 {
+				#index-cells = <1>;
+				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x30b10200 0x200>;
+			};
+
+			usbmisc3: usbmisc@30b30200 {
+				#index-cells = <1>;
+				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x30b30200 0x200>;
+			};
+
+			usbphynop1: usbphynop1 {
+				compatible = "usb-nop-xceiv";
+				clocks = <&clks IMX7D_USB_PHY1_CLK>;
+				clock-names = "main_clk";
+			};
+
+			usbphynop3: usbphynop3 {
+				compatible = "usb-nop-xceiv";
+				clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
+				clock-names = "main_clk";
+			};
+
+			usdhc1: usdhc@30b40000 {
+				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_USDHC1_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: usdhc@30b50000 {
+				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_USDHC2_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: usdhc@30b60000 {
+				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x30b60000 0x10000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_USDHC3_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			sdma: sdma@30bd0000 {
+				compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_SDMA_CORE_CLK>,
+					 <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			fec1: ethernet@30be0000 {
+				compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+					<&clks IMX7D_ENET_AXI_ROOT_CLK>,
+					<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
+					<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+					<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "ptp",
+					"enet_clk_ref", "enet_out";
+				fsl,num-tx-queues=<3>;
+				fsl,num-rx-queues=<3>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/src/arm/integratorap.dts b/src/arm/integratorap.dts
index cf06e32ee108..e8b249f92fb3 100644
--- a/src/arm/integratorap.dts
+++ b/src/arm/integratorap.dts
@@ -10,6 +10,41 @@
 	compatible = "arm,integrator-ap";
 	dma-ranges = <0x80000000 0x0 0x80000000>;
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			/*
+			 * Since the board has pluggable CPU modules, we
+			 * cannot define a proper compatible here. Let the
+			 * boot loader fill in the apropriate compatible
+			 * string if necessary.
+			 */
+			/* compatible = "arm,arm926ej-s"; */
+			reg = <0>;
+			/*
+			 * The documentation in ARM DUI 0138E page 3-12 states
+			 * that the maximum frequency for this clock is 200 MHz
+			 * but painful trial-and-error has proved to me that it
+			 * is actually just hanging the system above 71 MHz.
+			 * Sad but true.
+			 */
+					 /* kHz     uV   */
+			operating-points = <71000  0
+					    66000  0
+					    60000  0
+					    48000  0
+					    36000  0
+					    24000  0
+					    12000  0>;
+			clocks = <&cmosc>;
+			clock-names = "cpu";
+			clock-latency = <1000000>; /* 1 ms */
+		};
+	};
+
 	aliases {
 		arm,timer-primary = &timer2;
 		arm,timer-secondary = &timer1;
@@ -19,7 +54,7 @@
 		bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk";
 	};
 
-	/* 24 MHz chrystal on the core module */
+	/* 24 MHz chrystal on the Integrator/AP development board */
 	xtal24mhz: xtal24mhz@24M {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -39,14 +74,63 @@
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <14745600>;
+		clocks = <&xtal24mhz>;
+	};
+
+	core-module@10000000 {
+		/* 24 MHz chrystal on the core module */
+		cm24mhz: cm24mhz@24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		/* Oscillator on the core module, clocks the CPU core */
+		cmosc: cmosc@24M {
+			compatible = "arm,syscon-icst525-integratorap-cm";
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x08>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* Auxilary oscillator on the core module, 32.369MHz at boot */
+		auxosc: auxosc@24M {
+			compatible = "arm,syscon-icst525";
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x1c>;
+			clocks = <&cm24mhz>;
+		};
 	};
 
 	syscon {
-		compatible = "arm,integrator-ap-syscon";
+		compatible = "arm,integrator-ap-syscon", "syscon";
 		reg = <0x11000000 0x100>;
 		interrupt-parent = <&pic>;
 		/* These are the logical module IRQs */
 		interrupts = <9>, <10>, <11>, <12>;
+
+		/*
+		 * SYSCLK clocks PCIv3 bridge, system controller and the
+		 * logic modules.
+		 */
+		sysclk: apsys@24M {
+			compatible = "arm,syscon-icst525-integratorap-sys";
+			#clock-cells = <0>;
+			lock-offset = <0x1c>;
+			vco-offset = <0x04>;
+			clocks = <&xtal24mhz>;
+		};
+
+		/* One-bit control for the PCI bus clock (33 or 25 MHz) */
+		pciclk: pciclk@24M {
+			compatible = "arm,syscon-icst525-integratorap-pci";
+			#clock-cells = <0>;
+			lock-offset = <0x1c>;
+			vco-offset = <0x04>;
+			clocks = <&xtal24mhz>;
+		};
 	};
 
 	timer0: timer@13000000 {
diff --git a/src/arm/integratorcp.dts b/src/arm/integratorcp.dts
index d43f15b4f79a..97f38b57a702 100644
--- a/src/arm/integratorcp.dts
+++ b/src/arm/integratorcp.dts
@@ -13,6 +13,32 @@
 		bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
 	};
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			/*
+			 * Since the board has pluggable CPU modules, we
+			 * cannot define a proper compatible here. Let the
+			 * boot loader fill in the apropriate compatible
+			 * string if necessary.
+			 */
+			/* compatible = "arm,arm920t"; */
+			reg = <0>;
+			/*
+			 * TBD comment.
+			 */
+					 /* kHz     uV   */
+			operating-points = <50000  0
+					    48000  0>;
+			clocks = <&cmcore>;
+			clock-names = "cpu";
+			clock-latency = <1000000>; /* 1 ms */
+		};
+	};
+
 	/*
 	 * The Integrator/CP overall clocking architecture can be found in
 	 * ARM DUI 0184B page 7-28 "Integrator/CP922T system clocks" which
@@ -58,20 +84,37 @@
 
 	core-module@10000000 {
 		/* 24 MHz chrystal on the core module */
-		xtal24mhz: xtal24mhz@24M {
+		cm24mhz: cm24mhz@24M {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
 		};
 
-		/*
-		 * External oscillator on the core module, usually used
-		 * to drive video circuitry. Driven from the 24MHz clock.
-		 */
-		auxosc: cm_aux_osc@25M {
+		/* Oscillator on the core module, clocks the CPU core */
+		cmcore: cmosc@24M {
+			compatible = "arm,syscon-icst525-integratorcp-cm-core";
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x08>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* Oscillator on the core module, clocks the memory bus */
+		cmmem: cmosc@24M {
+			compatible = "arm,syscon-icst525-integratorcp-cm-mem";
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x08>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* Auxilary oscillator on the core module, clocks the CLCD */
+		auxosc: auxosc@24M {
+			compatible = "arm,syscon-icst525";
 			#clock-cells = <0>;
-			compatible = "arm,integrator-cm-auxosc";
-			clocks = <&xtal24mhz>;
+			lock-offset = <0x14>;
+			vco-offset = <0x1c>;
+			clocks = <&cm24mhz>;
 		};
 
 		/* The KMI clock is the 24 MHz oscillator divided to 8MHz */
@@ -80,7 +123,7 @@
 			compatible = "fixed-factor-clock";
 			clock-div = <3>;
 			clock-mult = <1>;
-			clocks = <&xtal24mhz>;
+			clocks = <&cm24mhz>;
 		};
 
 		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
@@ -89,12 +132,12 @@
 			compatible = "fixed-factor-clock";
 			clock-div = <24>;
 			clock-mult = <1>;
-			clocks = <&xtal24mhz>;
+			clocks = <&cm24mhz>;
 		};
 	};
 
 	syscon {
-		compatible = "arm,integrator-cp-syscon";
+		compatible = "arm,integrator-cp-syscon", "syscon";
 		reg = <0xcb000000 0x100>;
 	};
 
@@ -209,7 +252,42 @@
 			reg = <0xC0000000 0x1000>;
 			interrupts = <22>;
 			clocks = <&auxosc>, <&pclk>;
-			clock-names = "clcd", "apb_pclk";
+			clock-names = "clcdclk", "apb_pclk";
+
+			port {
+				/*
+				 * The VGA connected is implemented with a
+				 * THS8134A triple DAC that can be run in 24bit
+				 * or 16bit RGB mode.
+				 */
+				clcd_pads: endpoint {
+					remote-endpoint = <&clcd_panel>;
+					arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
+				};
+			};
+
+			panel {
+				compatible = "panel-dpi";
+
+				port {
+					clcd_panel: endpoint {
+						remote-endpoint = <&clcd_pads>;
+					};
+				};
+
+				/* Standard 640x480 VGA timings */
+				panel-timing {
+					clock-frequency = <25175000>;
+					hactive = <640>;
+					hback-porch = <48>;
+					hfront-porch = <16>;
+					hsync-len = <96>;
+					vactive = <480>;
+					vback-porch = <33>;
+					vfront-porch = <10>;
+					vsync-len = <2>;
+				};
+			};
 		};
 	};
 };
diff --git a/src/arm/keystone-k2e-evm.dts b/src/arm/keystone-k2e-evm.dts
index 4c32ebc1425a..ae1ebe7ee021 100644
--- a/src/arm/keystone-k2e-evm.dts
+++ b/src/arm/keystone-k2e-evm.dts
@@ -47,18 +47,26 @@
 	status = "okay";
 };
 
-&usb {
+&keystone_usb0 {
 	status = "okay";
 };
 
+&usb0 {
+	dr_mode = "host";
+};
+
 &usb1_phy {
 	status = "okay";
 };
 
-&usb1 {
+&keystone_usb1 {
 	status = "okay";
 };
 
+&usb1 {
+	dr_mode = "peripheral";
+};
+
 &i2c0 {
 	dtt@50 {
 		compatible = "at,24c1024";
diff --git a/src/arm/keystone-k2e.dtsi b/src/arm/keystone-k2e.dtsi
index 96b349fb0430..497c417db5b6 100644
--- a/src/arm/keystone-k2e.dtsi
+++ b/src/arm/keystone-k2e.dtsi
@@ -61,7 +61,7 @@
 			status = "disabled";
 		};
 
-		usb1: usb@25000000 {
+		keystone_usb1: usb@25000000 {
 			compatible = "ti,keystone-dwc3";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -74,7 +74,7 @@
 			dma-ranges;
 			status = "disabled";
 
-			dwc3@25010000 {
+			usb1: dwc3@25010000 {
 				compatible = "synopsys,dwc3";
 				reg = <0x25010000 0x70000>;
 				interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
@@ -96,13 +96,16 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			reg =  <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>;
-			ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000
-				0x82000000 0 0x60000000 0x60000000 0 0x10000000>;
+			ranges = <0x82000000 0 0x60000000 0x60000000
+				  0 0x10000000>;
 
 			status = "disabled";
 			device_type = "pci";
 			num-lanes = <2>;
+			bus-range = <0x00 0xff>;
 
+			/* error interrupt */
+			interrupts = <GIC_SPI 385 IRQ_TYPE_EDGE_RISING>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc1 0>, /* INT A */
diff --git a/src/arm/keystone-k2g-evm.dts b/src/arm/keystone-k2g-evm.dts
index 5bfd9e7845f2..692fcbb1434a 100644
--- a/src/arm/keystone-k2g-evm.dts
+++ b/src/arm/keystone-k2g-evm.dts
@@ -27,6 +27,17 @@
 
 };
 
+&k2g_pinctrl {
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x11cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+};
+
 &uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
 	status = "okay";
 };
diff --git a/src/arm/keystone-k2g.dtsi b/src/arm/keystone-k2g.dtsi
index 7ff2796ae925..63c7cf0c6b6d 100644
--- a/src/arm/keystone-k2g.dtsi
+++ b/src/arm/keystone-k2g.dtsi
@@ -14,6 +14,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/keystone.h>
 #include "skeleton.dtsi"
 
 / {
@@ -71,10 +72,23 @@
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
+		#pinctrl-cells = <1>;
 		compatible = "ti,keystone","simple-bus";
 		ranges = <0x0 0x0 0x0 0xc0000000>;
 		dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
 
+		k2g_pinctrl: pinmux@02621000 {
+			compatible = "pinctrl-single";
+			reg = <0x02621000 0x410>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x001b0007>;
+		};
+
+		devctrl: device-state-control@02620000 {
+			compatible = "ti,keystone-devctrl", "syscon";
+			reg = <0x02620000 0x1000>;
+		};
+
 		uart0: serial@02530c00 {
 			compatible = "ns16550a";
 			current-speed = <115200>;
@@ -85,5 +99,32 @@
 			clock-frequency = <200000000>;
 			status = "disabled";
 		};
+
+		kirq0: keystone_irq@026202a0 {
+			compatible = "ti,keystone-irq";
+			interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			ti,syscon-dev = <&devctrl 0x2a0>;
+		};
+
+		dspgpio0: keystone_dsp_gpio@02620240 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x240>;
+		};
+
+		msgmgr: msgmgr@02a00000 {
+			compatible = "ti,k2g-message-manager";
+			#mbox-cells = <2>;
+			reg-names = "queue_proxy_region",
+				    "queue_state_debug_region";
+			reg = <0x02a00000 0x400000>, <0x028c3400 0x400>;
+			interrupt-names = "rx_005",
+					  "rx_057";
+			interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 };
diff --git a/src/arm/keystone-k2hk-evm.dts b/src/arm/keystone-k2hk-evm.dts
index b38b3441818b..2156ff92d08f 100644
--- a/src/arm/keystone-k2hk-evm.dts
+++ b/src/arm/keystone-k2hk-evm.dts
@@ -83,10 +83,14 @@
 	status = "okay";
 };
 
-&usb {
+&keystone_usb0 {
 	status = "okay";
 };
 
+&usb0 {
+	dr_mode = "host";
+};
+
 &aemif {
 	cs0 {
 		#address-cells = <2>;
diff --git a/src/arm/keystone-k2l-evm.dts b/src/arm/keystone-k2l-evm.dts
index 7f9c2e94d605..056b42f99d7a 100644
--- a/src/arm/keystone-k2l-evm.dts
+++ b/src/arm/keystone-k2l-evm.dts
@@ -32,10 +32,14 @@
 	status = "okay";
 };
 
-&usb {
+&keystone_usb0 {
 	status = "okay";
 };
 
+&usb0 {
+	dr_mode = "host";
+};
+
 &i2c0 {
 	dtt@50 {
 		compatible = "at,24c1024";
diff --git a/src/arm/keystone-k2l.dtsi b/src/arm/keystone-k2l.dtsi
index ff22ffc3dee7..0c5e74e79ba2 100644
--- a/src/arm/keystone-k2l.dtsi
+++ b/src/arm/keystone-k2l.dtsi
@@ -54,6 +54,156 @@
 			interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>;
 		};
 
+		k2l_pmx: pinmux@02620690 {
+			compatible = "pinctrl-single";
+			reg = <0x02620690 0xc>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pinctrl-cells = <2>;
+			pinctrl-single,bit-per-mux;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x1>;
+			status = "disabled";
+
+			uart3_emifa_pins: pinmux_uart3_emifa_pins {
+				pinctrl-single,bits = <
+					/* UART3_EMIFA_SEL */
+					0x0 0x0  0xc0
+				>;
+			};
+
+			uart2_emifa_pins: pinmux_uart2_emifa_pins {
+			pinctrl-single,bits = <
+					/* UART2_EMIFA_SEL */
+					0x0 0x0  0x30
+				>;
+			};
+
+			uart01_spi2_pins: pinmux_uart01_spi2_pins {
+				pinctrl-single,bits = <
+					/* UART01_SPI2_SEL */
+					0x0 0x0 0x4
+				>;
+			};
+
+			dfesync_rp1_pins: pinmux_dfesync_rp1_pins{
+				pinctrl-single,bits = <
+					/* DFESYNC_RP1_SEL */
+					0x0 0x0 0x2
+				>;
+			};
+
+			avsif_pins: pinmux_avsif_pins {
+				pinctrl-single,bits = <
+					/* AVSIF_SEL */
+					0x0 0x0 0x1
+				>;
+			};
+
+			gpio_emu_pins: pinmux_gpio_emu_pins {
+				pinctrl-single,bits = <
+				/*
+				 * GPIO_EMU_SEL[31]: 0-GPIO31, 1-EMU33
+				 * GPIO_EMU_SEL[30]: 0-GPIO30, 1-EMU32
+				 * GPIO_EMU_SEL[29]: 0-GPIO29, 1-EMU31
+				 * GPIO_EMU_SEL[28]: 0-GPIO28, 1-EMU30
+				 * GPIO_EMU_SEL[27]: 0-GPIO27, 1-EMU29
+				 * GPIO_EMU_SEL[26]: 0-GPIO26, 1-EMU28
+				 * GPIO_EMU_SEL[25]: 0-GPIO25, 1-EMU27
+				 * GPIO_EMU_SEL[24]: 0-GPIO24, 1-EMU26
+				 * GPIO_EMU_SEL[23]: 0-GPIO23, 1-EMU25
+				 * GPIO_EMU_SEL[22]: 0-GPIO22, 1-EMU24
+				 * GPIO_EMU_SEL[21]: 0-GPIO21, 1-EMU23
+				 * GPIO_EMU_SEL[20]: 0-GPIO20, 1-EMU22
+				 * GPIO_EMU_SEL[19]: 0-GPIO19, 1-EMU21
+				 * GPIO_EMU_SEL[18]: 0-GPIO18, 1-EMU20
+				 * GPIO_EMU_SEL[17]: 0-GPIO17, 1-EMU19
+				 */
+					0x4 0x0000 0xFFFE0000
+				>;
+			};
+
+			gpio_timio_pins: pinmux_gpio_timio_pins {
+				pinctrl-single,bits = <
+				/*
+				 * GPIO_TIMIO_SEL[15]: 0-GPIO15, 1-TIMO7
+				 * GPIO_TIMIO_SEL[14]: 0-GPIO14, 1-TIMO6
+				 * GPIO_TIMIO_SEL[13]: 0-GPIO13, 1-TIMO5
+				 * GPIO_TIMIO_SEL[12]: 0-GPIO12, 1-TIMO4
+				 * GPIO_TIMIO_SEL[11]: 0-GPIO11, 1-TIMO3
+				 * GPIO_TIMIO_SEL[10]: 0-GPIO10, 1-TIMO2
+				 * GPIO_TIMIO_SEL[9]: 0-GPIO9, 1-TIMI7
+				 * GPIO_TIMIO_SEL[8]: 0-GPIO8, 1-TIMI6
+				 * GPIO_TIMIO_SEL[7]: 0-GPIO7, 1-TIMI5
+				 * GPIO_TIMIO_SEL[6]: 0-GPIO6, 1-TIMI4
+				 * GPIO_TIMIO_SEL[5]: 0-GPIO5, 1-TIMI3
+				 * GPIO_TIMIO_SEL[4]: 0-GPIO4, 1-TIMI2
+				 */
+					0x4 0x0 0xFFF0
+				>;
+			};
+
+			gpio_spi2cs_pins: pinmux_gpio_spi2cs_pins {
+				pinctrl-single,bits = <
+				/*
+				 * GPIO_SPI2CS_SEL[3]: 0-GPIO3, 1-SPI2CS4
+				 * GPIO_SPI2CS_SEL[2]: 0-GPIO2, 1-SPI2CS3
+				 * GPIO_SPI2CS_SEL[1]: 0-GPIO1, 1-SPI2CS2
+				 * GPIO_SPI2CS_SEL[0]: 0-GPIO0, 1-SPI2CS1
+				 */
+					0x4 0x0 0xF
+				>;
+			};
+
+			gpio_dfeio_pins: pinmux_gpio_dfeio_pins {
+				pinctrl-single,bits = <
+				/*
+				 * GPIO_DFEIO_SEL[31]: 0-DFEIO17, 1-GPIO63
+				 * GPIO_DFEIO_SEL[30]: 0-DFEIO16, 1-GPIO62
+				 * GPIO_DFEIO_SEL[29]: 0-DFEIO15, 1-GPIO61
+				 * GPIO_DFEIO_SEL[28]: 0-DFEIO14, 1-GPIO60
+				 * GPIO_DFEIO_SEL[27]: 0-DFEIO13, 1-GPIO59
+				 * GPIO_DFEIO_SEL[26]: 0-DFEIO12, 1-GPIO58
+				 * GPIO_DFEIO_SEL[25]: 0-DFEIO11, 1-GPIO57
+				 * GPIO_DFEIO_SEL[24]: 0-DFEIO10, 1-GPIO56
+				 * GPIO_DFEIO_SEL[23]: 0-DFEIO9, 1-GPIO55
+				 * GPIO_DFEIO_SEL[22]: 0-DFEIO8, 1-GPIO54
+				 * GPIO_DFEIO_SEL[21]: 0-DFEIO7, 1-GPIO53
+				 * GPIO_DFEIO_SEL[20]: 0-DFEIO6, 1-GPIO52
+				 * GPIO_DFEIO_SEL[19]: 0-DFEIO5, 1-GPIO51
+				 * GPIO_DFEIO_SEL[18]: 0-DFEIO4, 1-GPIO50
+				 * GPIO_DFEIO_SEL[17]: 0-DFEIO3, 1-GPIO49
+				 * GPIO_DFEIO_SEL[16]: 0-DFEIO2, 1-GPIO48
+				 */
+					0x8 0x0 0xFFFF0000
+				>;
+			};
+
+			gpio_emifa_pins: pinmux_gpio_emifa_pins {
+				pinctrl-single,bits = <
+				/*
+				 * GPIO_EMIFA_SEL[15]: 0-EMIFA17, 1-GPIO47
+				 * GPIO_EMIFA_SEL[14]: 0-EMIFA16, 1-GPIO46
+				 * GPIO_EMIFA_SEL[13]: 0-EMIFA15, 1-GPIO45
+				 * GPIO_EMIFA_SEL[12]: 0-EMIFA14, 1-GPIO44
+				 * GPIO_EMIFA_SEL[11]: 0-EMIFA13, 1-GPIO43
+				 * GPIO_EMIFA_SEL[10]: 0-EMIFA10, 1-GPIO42
+				 * GPIO_EMIFA_SEL[9]: 0-EMIFA9, 1-GPIO41
+				 * GPIO_EMIFA_SEL[8]: 0-EMIFA8, 1-GPIO40
+				 * GPIO_EMIFA_SEL[7]: 0-EMIFA7, 1-GPIO39
+				 * GPIO_EMIFA_SEL[6]: 0-EMIFA6, 1-GPIO38
+				 * GPIO_EMIFA_SEL[5]: 0-EMIFA5, 1-GPIO37
+				 * GPIO_EMIFA_SEL[4]: 0-EMIFA4, 1-GPIO36
+				 * GPIO_EMIFA_SEL[3]: 0-EMIFA3, 1-GPIO35
+				 * GPIO_EMIFA_SEL[2]: 0-EMIFA2, 1-GPIO34
+				 * GPIO_EMIFA_SEL[1]: 0-EMIFA1, 1-GPIO33
+				 * GPIO_EMIFA_SEL[0]: 0-EMIFA0, 1-GPIO32
+				 */
+					0x8 0x0 0xFFFF
+				>;
+			};
+		};
+
 		dspgpio0: keystone_dsp_gpio@02620240 {
 			compatible = "ti,keystone-dsp-gpio";
 			gpio-controller;
diff --git a/src/arm/keystone.dtsi b/src/arm/keystone.dtsi
index e34b2265458a..02708ba2d4f4 100644
--- a/src/arm/keystone.dtsi
+++ b/src/arm/keystone.dtsi
@@ -188,7 +188,7 @@
 			status = "disabled";
 		};
 
-		usb: usb@2680000 {
+		keystone_usb0: usb@2680000 {
 			compatible = "ti,keystone-dwc3";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -201,7 +201,7 @@
 			dma-ranges;
 			status = "disabled";
 
-			dwc3@2690000 {
+			usb0: dwc3@2690000 {
 				compatible = "synopsys,dwc3";
 				reg = <0x2690000 0x70000>;
 				interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
@@ -294,13 +294,16 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			reg =  <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>;
-			ranges = <0x81000000 0 0 0x23250000 0 0x4000
-				0x82000000 0 0x50000000 0x50000000 0 0x10000000>;
+			ranges = <0x82000000 0 0x50000000 0x50000000
+				  0 0x10000000>;
 
 			status = "disabled";
 			device_type = "pci";
 			num-lanes = <2>;
+			bus-range = <0x00 0xff>;
 
+			/* error interrupt */
+			interrupts = <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc0 0>, /* INT A */
diff --git a/src/arm/kirkwood-ib62x0.dts b/src/arm/kirkwood-ib62x0.dts
index ef84d8699a76..5bf62897014c 100644
--- a/src/arm/kirkwood-ib62x0.dts
+++ b/src/arm/kirkwood-ib62x0.dts
@@ -113,7 +113,7 @@
 
 	partition@e0000 {
 		label = "u-boot environment";
-		reg = <0xe0000 0x100000>;
+		reg = <0xe0000 0x20000>;
 	};
 
 	partition@100000 {
diff --git a/src/arm/kirkwood-ns2lite.dts b/src/arm/kirkwood-ns2lite.dts
index 1f2ca60d8b3d..2c661add0cc0 100644
--- a/src/arm/kirkwood-ns2lite.dts
+++ b/src/arm/kirkwood-ns2lite.dts
@@ -26,7 +26,7 @@
 		blue-sata {
 			label = "ns2:blue:sata";
 			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "ide-disk";
+			linux,default-trigger = "disk-activity";
 		};
 	};
 };
diff --git a/src/arm/kirkwood-openblocks_a6.dts b/src/arm/kirkwood-openblocks_a6.dts
index 0db0e3edc88f..94e49f32d5f9 100644
--- a/src/arm/kirkwood-openblocks_a6.dts
+++ b/src/arm/kirkwood-openblocks_a6.dts
@@ -41,7 +41,7 @@
 		};
 
 		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>;
+			pinctrl-0 = <&pmx_dip_switches>;
 			pinctrl-names = "default";
 
 			pmx_uart0: pmx-uart0 {
@@ -174,3 +174,10 @@
 		phy-handle = <&ethphy0>;
 	};
 };
+
+&gpio0 {
+	status = "okay";
+
+	pinctrl-0 = <&pmx_gpio_header>;
+	pinctrl-names = "default";
+};
diff --git a/src/arm/kirkwood-openrd.dtsi b/src/arm/kirkwood-openrd.dtsi
index e4ecab112601..7175511a92da 100644
--- a/src/arm/kirkwood-openrd.dtsi
+++ b/src/arm/kirkwood-openrd.dtsi
@@ -116,6 +116,10 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+};
+
 &pcie0 {
 	status = "okay";
 };
diff --git a/src/arm/kirkwood-topkick.dts b/src/arm/kirkwood-topkick.dts
index f5c8c0dd41dc..330aada6d33f 100644
--- a/src/arm/kirkwood-topkick.dts
+++ b/src/arm/kirkwood-topkick.dts
@@ -4,7 +4,7 @@
 #include "kirkwood-6282.dtsi"
 
 / {
-	model = "Univeral Scientific Industrial Co. Topkick-1281P2";
+	model = "Universal Scientific Industrial Co. Topkick-1281P2";
 	compatible = "usi,topkick-1281P2", "usi,topkick", "marvell,kirkwood-88f6282", "marvell,kirkwood";
 
 	memory {
@@ -129,7 +129,7 @@
 		disk {
 			label = "topkick:yellow:disk";
 			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "ide-disk";
+			linux,default-trigger = "disk-activity";
 		};
 		system2 {
 			label = "topkick:red:system";
diff --git a/src/arm/logicpd-som-lv-37xx-devkit.dts b/src/arm/logicpd-som-lv-37xx-devkit.dts
index da8598402ab8..38faa90007d7 100644
--- a/src/arm/logicpd-som-lv-37xx-devkit.dts
+++ b/src/arm/logicpd-som-lv-37xx-devkit.dts
@@ -158,7 +158,7 @@
 &mmc1 {
 	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins &mmc1_cd>;
+	pinctrl-0 = <&mmc1_pins>;
 	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;		/* gpio_126 */
 	cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>;		/* gpio_110 */
 	vmmc-supply = <&vmmc1>;
@@ -193,7 +193,8 @@
 			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
 			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
 			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-			OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_strobe.gpio_126 sdmmc1_wp*/
+			OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_strobe.gpio_126 */
+			OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_d11.gpio_110 */
 		>;
 	};
 
@@ -242,12 +243,6 @@
 			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* sys_boot6.gpio_8 */
 		>;
 	};
-
-	mmc1_cd: pinmux_mmc1_cd {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_d11.gpio_110 */
-		>;
-	};
 };
 
 
diff --git a/src/arm/logicpd-som-lv.dtsi b/src/arm/logicpd-som-lv.dtsi
index 365f39ff58bb..26cce4d18405 100644
--- a/src/arm/logicpd-som-lv.dtsi
+++ b/src/arm/logicpd-som-lv.dtsi
@@ -13,6 +13,11 @@
 		};
 	};
 
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
 	wl12xx_vmmc: wl12xx_vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vwl1271";
@@ -35,10 +40,15 @@
 	ranges = <0 0 0x00000000 0x1000000>;	/* CS0: 16MB for NAND */
 
 	nand@0,0 {
-		linux,mtd-name = "micron,mt29f4g16abbda3w";
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		linux,mtd-name = "micron,mt29f4g16abbda3w";
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "bch8";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <44>;
@@ -54,10 +64,6 @@
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		gpmc,device-width = <2>;
-
-		gpmc,page-burst-access-ns = <5>;
-		gpmc,cycle2cycle-delay-ns = <50>;
-
 		#address-cells = <1>;
 		#size-cells = <1>;
 
diff --git a/src/arm/logicpd-torpedo-37xx-devkit.dts b/src/arm/logicpd-torpedo-37xx-devkit.dts
index 015f795a8d19..08cce17a25a0 100644
--- a/src/arm/logicpd-torpedo-37xx-devkit.dts
+++ b/src/arm/logicpd-torpedo-37xx-devkit.dts
@@ -72,7 +72,7 @@
 		};
 	};
 
-	pwm10: dmtimer-pwm@10 {
+	pwm10: dmtimer-pwm {
 		compatible = "ti,omap-dmtimer-pwm";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm_pins>;
@@ -147,7 +147,7 @@
 		gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd INI */
 	};
 
-	lcd0: display@0 {
+	lcd0: display {
 		compatible = "panel-dpi";
 		label = "15";
 		status = "okay";
diff --git a/src/arm/logicpd-torpedo-som.dtsi b/src/arm/logicpd-torpedo-som.dtsi
index 5e9a13c0eaf7..8f9a69ca818c 100644
--- a/src/arm/logicpd-torpedo-som.dtsi
+++ b/src/arm/logicpd-torpedo-som.dtsi
@@ -13,6 +13,11 @@
 		};
 	};
 
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		user0 {
@@ -46,6 +51,7 @@
 		linux,mtd-name = "micron,mt29f4g16abbda3w";
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "bch8";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <44>;
diff --git a/src/arm/lpc18xx.dtsi b/src/arm/lpc18xx.dtsi
index fdb736c82045..7cae9c5e27db 100644
--- a/src/arm/lpc18xx.dtsi
+++ b/src/arm/lpc18xx.dtsi
@@ -20,6 +20,9 @@
 #define LPC_GPIO(port, pin)	(port * 32 + pin)
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -186,6 +189,10 @@
 			clock-names = "stmmaceth";
 			resets = <&rgu 22>;
 			reset-names = "stmmaceth";
+			rx-fifo-depth = <256>;
+			tx-fifo-depth = <256>;
+			snps,pbl = <4>; /* 32 (8x mode) */
+			snps,force_thresh_dma_mode;
 			status = "disabled";
 		};
 
diff --git a/src/arm/lpc32xx.dtsi b/src/arm/lpc32xx.dtsi
index e295e1ec82a5..d81fe433e3c8 100644
--- a/src/arm/lpc32xx.dtsi
+++ b/src/arm/lpc32xx.dtsi
@@ -51,9 +51,19 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
-		ranges = <0x20000000 0x20000000 0x30000000>,
+		ranges = <0x00000000 0x00000000 0x10000000>,
+			 <0x20000000 0x20000000 0x30000000>,
 			 <0xe0000000 0xe0000000 0x04000000>;
 
+		iram: sram@08000000 {
+			compatible = "mmio-sram";
+			reg = <0x08000000 0x20000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x08000000 0x20000>;
+		};
+
 		/*
 		 * Enable either SLC or MLC
 		 */
@@ -469,6 +479,8 @@
 				compatible = "nxp,lpc3220-pwm";
 				reg = <0x4005C000 0x4>;
 				clocks = <&clk LPC32XX_CLK_PWM1>;
+				assigned-clocks = <&clk LPC32XX_CLK_PWM1>;
+				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
 				status = "disabled";
 			};
 
@@ -476,6 +488,8 @@
 				compatible = "nxp,lpc3220-pwm";
 				reg = <0x4005C004 0x4>;
 				clocks = <&clk LPC32XX_CLK_PWM2>;
+				assigned-clocks = <&clk LPC32XX_CLK_PWM2>;
+				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
 				status = "disabled";
 			};
 
diff --git a/src/arm/lpc4337-ciaa.dts b/src/arm/lpc4337-ciaa.dts
index 5cfadb06c8df..7c16d639a1b4 100644
--- a/src/arm/lpc4337-ciaa.dts
+++ b/src/arm/lpc4337-ciaa.dts
@@ -30,7 +30,7 @@
 		stdout-path = &uart2;
 	};
 
-	memory {
+	memory@28000000 {
 		device_type = "memory";
 		reg = <0x28000000 0x0800000>; /* 8 MB */
 	};
diff --git a/src/arm/lpc4350-hitex-eval.dts b/src/arm/lpc4350-hitex-eval.dts
index 6c9048d4d03c..874c75d44013 100644
--- a/src/arm/lpc4350-hitex-eval.dts
+++ b/src/arm/lpc4350-hitex-eval.dts
@@ -33,7 +33,7 @@
 		stdout-path = &uart0;
 	};
 
-	memory {
+	memory@28000000 {
 		device_type = "memory";
 		reg = <0x28000000 0x800000>; /* 8 MB */
 	};
@@ -424,7 +424,7 @@
 
 	/* NXP SE97BTP with temperature sensor + eeprom */
 	sensor@18 {
-		compatible = "nxp,jc42";
+		compatible = "nxp,se97", "jedec,jc-42.4-temp";
 		reg = <0x18>;
 	};
 
diff --git a/src/arm/lpc4357-ea4357-devkit.dts b/src/arm/lpc4357-ea4357-devkit.dts
index 1919be4dab2b..9b5fad622522 100644
--- a/src/arm/lpc4357-ea4357-devkit.dts
+++ b/src/arm/lpc4357-ea4357-devkit.dts
@@ -33,7 +33,7 @@
 		stdout-path = &uart0;
 	};
 
-	memory {
+	memory@28000000 {
 		device_type = "memory";
 		reg = <0x28000000 0x2000000>; /* 32 MB */
 	};
diff --git a/src/arm/ls1021a-twr.dts b/src/arm/ls1021a-twr.dts
index 75ecaed32ae5..a8b148ad1dd2 100644
--- a/src/arm/ls1021a-twr.dts
+++ b/src/arm/ls1021a-twr.dts
@@ -108,12 +108,23 @@
 
 	panel: panel {
 		compatible = "nec,nl4827hc19-05b";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dcu_out>;
+			};
+		};
 	};
 };
 
 &dcu {
-	fsl,panel = <&panel>;
 	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
 };
 
 &dspi1 {
diff --git a/src/arm/ls1021a.dtsi b/src/arm/ls1021a.dtsi
index 5ae8e9297e9a..282d854f4342 100644
--- a/src/arm/ls1021a.dtsi
+++ b/src/arm/ls1021a.dtsi
@@ -47,6 +47,7 @@
 
 #include "skeleton64.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "fsl,ls1021a";
@@ -70,14 +71,15 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@f00 {
+		cpu0: cpu@f00 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0xf00>;
 			clocks = <&cluster1_clk>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@f01 {
+		cpu1: cpu@f01 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0xf01>;
@@ -251,6 +253,84 @@
 			};
 		};
 
+		tmu: tmu@1f00000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f00000 0x0 0x10000>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>;
+			fsl,tmu-calibration = <0x00000000 0x0000000f
+					       0x00000001 0x00000017
+					       0x00000002 0x0000001e
+					       0x00000003 0x00000026
+					       0x00000004 0x0000002e
+					       0x00000005 0x00000035
+					       0x00000006 0x0000003d
+					       0x00000007 0x00000044
+					       0x00000008 0x0000004c
+					       0x00000009 0x00000053
+					       0x0000000a 0x0000005b
+					       0x0000000b 0x00000064
+
+					       0x00010000 0x00000011
+					       0x00010001 0x0000001c
+					       0x00010002 0x00000024
+					       0x00010003 0x0000002b
+					       0x00010004 0x00000034
+					       0x00010005 0x00000039
+					       0x00010006 0x00000042
+					       0x00010007 0x0000004c
+					       0x00010008 0x00000051
+					       0x00010009 0x0000005a
+					       0x0001000a 0x00000063
+
+					       0x00020000 0x00000013
+					       0x00020001 0x00000019
+					       0x00020002 0x00000024
+					       0x00020003 0x0000002c
+					       0x00020004 0x00000035
+					       0x00020005 0x0000003d
+					       0x00020006 0x00000046
+					       0x00020007 0x00000050
+					       0x00020008 0x00000059
+
+					       0x00030000 0x00000002
+					       0x00030001 0x0000000d
+					       0x00030002 0x00000019
+					       0x00030003 0x00000024>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		thermal-zones {
+			cpu_thermal: cpu-thermal {
+				polling-delay-passive = <1000>;
+				polling-delay = <5000>;
+
+				thermal-sensors = <&tmu 0>;
+
+				trips {
+					cpu_alert: cpu-alert {
+						temperature = <85000>;
+						hysteresis = <2000>;
+						type = "passive";
+					};
+					cpu_crit: cpu-crit {
+						temperature = <95000>;
+						hysteresis = <2000>;
+						type = "critical";
+					};
+				};
+
+				cooling-maps {
+					map0 {
+						trip = <&cpu_alert>;
+						cooling-device =
+							<&cpu0 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+					};
+				};
+			};
+		};
+
 		dspi0: dspi@2100000 {
 			compatible = "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
@@ -626,6 +706,7 @@
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
 		};
 
 		pcie@3400000 {
diff --git a/src/arm/meson8-minix-neo-x8.dts b/src/arm/meson8-minix-neo-x8.dts
index 4f536bb1f002..8bceb8d343f6 100644
--- a/src/arm/meson8-minix-neo-x8.dts
+++ b/src/arm/meson8-minix-neo-x8.dts
@@ -80,6 +80,7 @@
 	pmic@32 {
 		compatible = "ricoh,rn5t618";
 		reg = <0x32>;
+		system-power-controller;
 
 		regulators {
 		};
diff --git a/src/arm/meson8b.dtsi b/src/arm/meson8b.dtsi
index 2bfe401a4da9..41fd53671859 100644
--- a/src/arm/meson8b.dtsi
+++ b/src/arm/meson8b.dtsi
@@ -46,6 +46,7 @@
 
 #include <dt-bindings/clock/meson8b-clkc.h>
 #include <dt-bindings/gpio/meson8b-gpio.h>
+#include <dt-bindings/reset/amlogic,meson8b-reset.h>
 #include "skeleton.dtsi"
 
 / {
@@ -105,6 +106,12 @@
 			#interrupt-cells = <3>;
 		};
 
+		reset: reset-controller@c1104404 {
+			compatible = "amlogic,meson8b-reset";
+			reg = <0xc1104404 0x20>;
+			#reset-cells = <1>;
+		};
+
 		wdt: watchdog@c1109900 {
 			compatible = "amlogic,meson8b-wdt";
 			reg = <0xc1109900 0x8>;
@@ -155,6 +162,27 @@
 			reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
 		};
 
+		pwm_ab: pwm@8550 {
+			compatible = "amlogic,meson8b-pwm";
+			reg = <0xc1108550 0x10>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm_cd: pwm@8650 {
+			compatible = "amlogic,meson8b-pwm";
+			reg = <0xc1108650 0x10>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm_ef: pwm@86c0 {
+			compatible = "amlogic,meson8b-pwm";
+			reg = <0xc11086c0 0x10>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		pinctrl_cbus: pinctrl@c1109880 {
 			compatible = "amlogic,meson8b-cbus-pinctrl";
 			reg = <0xc1109880 0x10>;
diff --git a/src/arm/mpa1600.dts b/src/arm/mpa1600.dts
index f0f5e1098928..116ce78bea4f 100644
--- a/src/arm/mpa1600.dts
+++ b/src/arm/mpa1600.dts
@@ -17,15 +17,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -61,7 +52,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 
diff --git a/src/arm/mps2-an385.dts b/src/arm/mps2-an385.dts
index 31c374d72a6f..aebbebfc25d1 100644
--- a/src/arm/mps2-an385.dts
+++ b/src/arm/mps2-an385.dts
@@ -59,7 +59,7 @@
 		stdout-path = "serial0:9600n8";
 	};
 
-	memory {
+	memory@21000000 {
 		device_type = "memory";
 		reg = <0x21000000 0x1000000>;
 	};
diff --git a/src/arm/mps2-an399.dts b/src/arm/mps2-an399.dts
index 5e7e5ca2edbf..349abf70b2a5 100644
--- a/src/arm/mps2-an399.dts
+++ b/src/arm/mps2-an399.dts
@@ -59,7 +59,7 @@
 		stdout-path = "serial0:9600n8";
 	};
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x1000000>;
 	};
diff --git a/src/arm/mps2.dtsi b/src/arm/mps2.dtsi
index e3fed8d34558..23467390558d 100644
--- a/src/arm/mps2.dtsi
+++ b/src/arm/mps2.dtsi
@@ -45,6 +45,9 @@
 #include "armv7-m.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	oscclk0: clk-osc0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
diff --git a/src/arm/mt2701.dtsi b/src/arm/mt2701.dtsi
index 18596a2c58a1..7eab6f4c4665 100644
--- a/src/arm/mt2701.dtsi
+++ b/src/arm/mt2701.dtsi
@@ -12,8 +12,10 @@
  * GNU General Public License for more details.
  */
 
+#include <dt-bindings/clock/mt2701-clk.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/mt2701-resets.h>
 #include "skeleton64.dtsi"
 #include "mt2701-pinfunc.h"
 
@@ -71,10 +73,18 @@
 		#clock-cells = <0>;
 	};
 
-	uart_clk: dummy26m {
+	clk26m: oscillator@0 {
 		compatible = "fixed-clock";
+		#clock-cells = <0>;
 		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	rtc32k: oscillator@1 {
+		compatible = "fixed-clock";
 		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "rtc32k";
 	};
 
 	timer {
@@ -104,6 +114,26 @@
 		reg = <0 0x10005000 0 0x1000>;
 	};
 
+	topckgen: syscon@10000000 {
+		compatible = "mediatek,mt2701-topckgen", "syscon";
+		reg = <0 0x10000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	infracfg: syscon@10001000 {
+		compatible = "mediatek,mt2701-infracfg", "syscon";
+		reg = <0 0x10001000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pericfg: syscon@10003000 {
+		compatible = "mediatek,mt2701-pericfg", "syscon";
+		reg = <0 0x10003000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
 	watchdog: watchdog@10007000 {
 		compatible = "mediatek,mt2701-wdt",
 			     "mediatek,mt6589-wdt";
@@ -128,6 +158,12 @@
 		reg = <0 0x10200100 0 0x1c>;
 	};
 
+	apmixedsys: syscon@10209000 {
+		compatible = "mediatek,mt2701-apmixedsys", "syscon";
+		reg = <0 0x10209000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
 	gic: interrupt-controller@10211000 {
 		compatible = "arm,cortex-a7-gic";
 		interrupt-controller;
@@ -144,7 +180,8 @@
 			     "mediatek,mt6577-uart";
 		reg = <0 0x11002000 0 0x400>;
 		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
+		clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+		clock-names = "baud", "bus";
 		status = "disabled";
 	};
 
@@ -153,7 +190,8 @@
 			     "mediatek,mt6577-uart";
 		reg = <0 0x11003000 0 0x400>;
 		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
+		clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+		clock-names = "baud", "bus";
 		status = "disabled";
 	};
 
@@ -162,7 +200,8 @@
 			     "mediatek,mt6577-uart";
 		reg = <0 0x11004000 0 0x400>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
+		clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+		clock-names = "baud", "bus";
 		status = "disabled";
 	};
 
@@ -171,7 +210,8 @@
 			     "mediatek,mt6577-uart";
 		reg = <0 0x11005000 0 0x400>;
 		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
+		clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+		clock-names = "baud", "bus";
 		status = "disabled";
 	};
 };
diff --git a/src/arm/omap2.dtsi b/src/arm/omap2.dtsi
index 578fa2a54dce..f1d6de8b3c19 100644
--- a/src/arm/omap2.dtsi
+++ b/src/arm/omap2.dtsi
@@ -12,11 +12,12 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/omap.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
 
 	aliases {
 		serial0 = &uart1;
diff --git a/src/arm/omap2420-h4.dts b/src/arm/omap2420-h4.dts
index 34cdecb4fdda..9265c0b9c3f3 100644
--- a/src/arm/omap2420-h4.dts
+++ b/src/arm/omap2420-h4.dts
@@ -13,7 +13,7 @@
 	model = "TI OMAP2420 H4 board";
 	compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x4000000>; /* 64 MB */
 	};
diff --git a/src/arm/omap2420-n8x0-common.dtsi b/src/arm/omap2420-n8x0-common.dtsi
index db95aadcca70..7e5ffc583c90 100644
--- a/src/arm/omap2420-n8x0-common.dtsi
+++ b/src/arm/omap2420-n8x0-common.dtsi
@@ -1,7 +1,7 @@
 #include "omap2420.dtsi"
 
 / {
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x8000000>; /* 128 MB */
 	};
diff --git a/src/arm/omap2420.dtsi b/src/arm/omap2420.dtsi
index fb712b9aa874..aba542d63d6d 100644
--- a/src/arm/omap2420.dtsi
+++ b/src/arm/omap2420.dtsi
@@ -38,6 +38,7 @@
 				reg = <0x0 0x1000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
+				#pinctrl-cells = <1>;
 				ranges = <0 0x0 0x1000>;
 
 				omap2420_pmx: pinmux@30 {
@@ -46,6 +47,7 @@
 					reg = <0x30 0x0113>;
 					#address-cells = <1>;
 					#size-cells = <0>;
+					#pinctrl-cells = <1>;
 					pinctrl-single,register-width = <8>;
 					pinctrl-single,function-mask = <0x3f>;
 				};
diff --git a/src/arm/omap2430-sdp.dts b/src/arm/omap2430-sdp.dts
index 6b36ede58488..4f7d9d7c00c7 100644
--- a/src/arm/omap2430-sdp.dts
+++ b/src/arm/omap2430-sdp.dts
@@ -13,7 +13,7 @@
 	model = "TI OMAP2430 SDP";
 	compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x8000000>; /* 128 MB */
 	};
diff --git a/src/arm/omap2430.dtsi b/src/arm/omap2430.dtsi
index 455aaea407dd..84635eeb99cd 100644
--- a/src/arm/omap2430.dtsi
+++ b/src/arm/omap2430.dtsi
@@ -38,6 +38,7 @@
 				reg = <0x2000 0x1000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
+				#pinctrl-cells = <1>;
 				ranges = <0 0x2000 0x1000>;
 
 				omap2430_pmx: pinmux@30 {
@@ -46,6 +47,7 @@
 					reg = <0x30 0x0154>;
 					#address-cells = <1>;
 					#size-cells = <0>;
+					#pinctrl-cells = <1>;
 					pinctrl-single,register-width = <8>;
 					pinctrl-single,function-mask = <0x3f>;
 				};
diff --git a/src/arm/omap24xx-clocks.dtsi b/src/arm/omap24xx-clocks.dtsi
index ca73722b5ea4..769a346de613 100644
--- a/src/arm/omap24xx-clocks.dtsi
+++ b/src/arm/omap24xx-clocks.dtsi
@@ -164,7 +164,7 @@
 		clock-div = <1>;
 	};
 
-	func_96m_ck: func_96m_ck {
+	func_96m_ck: func_96m_ck@540 {
 		#clock-cells = <0>;
 	};
 
diff --git a/src/arm/omap3-beagle-xm.dts b/src/arm/omap3-beagle-xm.dts
index 01e1e2d5c735..85e297ed0ea1 100644
--- a/src/arm/omap3-beagle-xm.dts
+++ b/src/arm/omap3-beagle-xm.dts
@@ -19,7 +19,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
@@ -91,7 +91,7 @@
 		vcc-supply = <&hsusb2_power>;
 	};
 
-	tfp410: encoder@0 {
+	tfp410: encoder0 {
 		compatible = "ti,tfp410";
 		powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
 
@@ -104,7 +104,7 @@
 			port@0 {
 				reg = <0>;
 
-				tfp410_in: endpoint@0 {
+				tfp410_in: endpoint {
 					remote-endpoint = <&dpi_out>;
 				};
 			};
@@ -112,14 +112,14 @@
 			port@1 {
 				reg = <1>;
 
-				tfp410_out: endpoint@0 {
+				tfp410_out: endpoint {
 					remote-endpoint = <&dvi_connector_in>;
 				};
 			};
 		};
 	};
 
-	dvi0: connector@0 {
+	dvi0: connector0 {
 		compatible = "dvi-connector";
 		label = "dvi";
 
@@ -134,7 +134,7 @@
 		};
 	};
 
-	tv0: connector@1 {
+	tv0: connector1 {
 		compatible = "svideo-connector";
 		label = "tv";
 
diff --git a/src/arm/omap3-beagle.dts b/src/arm/omap3-beagle.dts
index a4deff0e2d52..4be85ce59dd1 100644
--- a/src/arm/omap3-beagle.dts
+++ b/src/arm/omap3-beagle.dts
@@ -19,7 +19,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
@@ -85,7 +85,7 @@
 
 	};
 
-	tfp410: encoder@0 {
+	tfp410: encoder0 {
 		compatible = "ti,tfp410";
 		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;	/* gpio_170 */
 
@@ -99,7 +99,7 @@
 			port@0 {
 				reg = <0>;
 
-				tfp410_in: endpoint@0 {
+				tfp410_in: endpoint {
 					remote-endpoint = <&dpi_out>;
 				};
 			};
@@ -107,14 +107,14 @@
 			port@1 {
 				reg = <1>;
 
-				tfp410_out: endpoint@0 {
+				tfp410_out: endpoint {
 					remote-endpoint = <&dvi_connector_in>;
 				};
 			};
 		};
 	};
 
-	dvi0: connector@0 {
+	dvi0: connector0 {
 		compatible = "dvi-connector";
 		label = "dvi";
 
@@ -129,7 +129,7 @@
 		};
 	};
 
-	tv0: connector@1 {
+	tv0: connector1 {
 		compatible = "svideo-connector";
 		label = "tv";
 
diff --git a/src/arm/omap3-cm-t3x.dtsi b/src/arm/omap3-cm-t3x.dtsi
index a8127bc31fd9..57b9a028a49a 100644
--- a/src/arm/omap3-cm-t3x.dtsi
+++ b/src/arm/omap3-cm-t3x.dtsi
@@ -4,7 +4,7 @@
 
 / {
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
@@ -57,7 +57,7 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	tv0: connector@1 {
+	tv0: connector {
 		compatible = "svideo-connector";
 		label = "tv";
 
diff --git a/src/arm/omap3-devkit8000-common.dtsi b/src/arm/omap3-devkit8000-common.dtsi
index b1b8ebf90c1c..f330c69cc683 100644
--- a/src/arm/omap3-devkit8000-common.dtsi
+++ b/src/arm/omap3-devkit8000-common.dtsi
@@ -10,7 +10,7 @@
 
 #include "omap34xx.dtsi"
 / {
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>;	/* 256 MB */
 	};
@@ -68,7 +68,7 @@
 		};
 	};
 
-	tfp410: encoder@0 {
+	tfp410: encoder0 {
 		compatible = "ti,tfp410";
 		powerdown-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
 
@@ -79,7 +79,7 @@
 			port@0 {
 				reg = <0>;
 
-				tfp410_in: endpoint@0 {
+				tfp410_in: endpoint {
 					remote-endpoint = <&dpi_dvi_out>;
 				};
 			};
@@ -87,14 +87,14 @@
 			port@1 {
 				reg = <1>;
 
-				tfp410_out: endpoint@0 {
+				tfp410_out: endpoint {
 					remote-endpoint = <&dvi_connector_in>;
 				};
 			};
 		};
 	};
 
-	dvi0: connector@0 {
+	dvi0: connector0 {
 		compatible = "dvi-connector";
 		label = "dvi";
 
@@ -109,7 +109,7 @@
 		};
 	};
 
-	tv0: connector@1 {
+	tv0: connector1 {
 		compatible = "svideo-connector";
 		label = "tv";
 
@@ -352,7 +352,7 @@
 	vdda_dac-supply = <&vdac>;
 
 	port {
-		dpi_dvi_out: endpoint@0 {
+		dpi_dvi_out: endpoint {
 			remote-endpoint = <&tfp410_in>;
 			data-lines = <24>;
 		};
diff --git a/src/arm/omap3-devkit8000-lcd-common.dtsi b/src/arm/omap3-devkit8000-lcd-common.dtsi
index 738910db5c0c..2d64bcffaaa8 100644
--- a/src/arm/omap3-devkit8000-lcd-common.dtsi
+++ b/src/arm/omap3-devkit8000-lcd-common.dtsi
@@ -14,7 +14,7 @@
 		display2 = &tv0;
 	};
 
-	lcd0: display@0 {
+	lcd0: display {
 		compatible = "panel-dpi";
 		label = "lcd";
 
@@ -30,7 +30,7 @@
 
 &dss {
 	port {
-		dpi_lcd_out: endpoint@1 {
+		dpi_lcd_out: endpoint {
 			remote-endpoint = <&lcd_in>;
 			data-lines = <24>;
 		};
diff --git a/src/arm/omap3-devkit8000-lcd43.dts b/src/arm/omap3-devkit8000-lcd43.dts
index d5705356d52c..d8b16398bfb3 100644
--- a/src/arm/omap3-devkit8000-lcd43.dts
+++ b/src/arm/omap3-devkit8000-lcd43.dts
@@ -16,7 +16,7 @@
 	model = "TimLL OMAP3 Devkit8000 with 4.3'' LCD panel";
 	compatible = "timll,omap3-devkit8000", "ti,omap3";
 
-	lcd0: display@0 {
+	lcd0: display {
 		panel-timing {
 			clock-frequency = <10164705>;
 			hactive = <480>;
diff --git a/src/arm/omap3-devkit8000-lcd70.dts b/src/arm/omap3-devkit8000-lcd70.dts
index 4afad4b233ec..edb37ba80498 100644
--- a/src/arm/omap3-devkit8000-lcd70.dts
+++ b/src/arm/omap3-devkit8000-lcd70.dts
@@ -16,7 +16,7 @@
 	model = "TimLL OMAP3 Devkit8000 with 7.0'' LCD panel";
 	compatible = "timll,omap3-devkit8000", "ti,omap3";
 
-	lcd0: display@0 {
+	lcd0: display {
 		panel-timing {
 			clock-frequency = <40000000>;
 			hactive = <800>;
diff --git a/src/arm/omap3-evm-37xx.dts b/src/arm/omap3-evm-37xx.dts
index ed449827c3d3..4f9a76544602 100644
--- a/src/arm/omap3-evm-37xx.dts
+++ b/src/arm/omap3-evm-37xx.dts
@@ -15,7 +15,7 @@
 	model = "TI OMAP37XX EVM (TMDSEVM3730)";
 	compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/src/arm/omap3-evm.dts b/src/arm/omap3-evm.dts
index e10dcd0fa539..99b2bfcd1059 100644
--- a/src/arm/omap3-evm.dts
+++ b/src/arm/omap3-evm.dts
@@ -14,7 +14,7 @@
 	model = "TI OMAP35XX EVM (TMDSEVM3530)";
 	compatible = "ti,omap3-evm", "ti,omap3";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/src/arm/omap3-gta04.dtsi b/src/arm/omap3-gta04.dtsi
index ab9fb8f49ff3..b3a8b1f24499 100644
--- a/src/arm/omap3-gta04.dtsi
+++ b/src/arm/omap3-gta04.dtsi
@@ -21,7 +21,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
@@ -100,12 +100,28 @@
 		};
 	};
 
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm11 0 12000000 0>;
+		pwm-names = "backlight";
+		brightness-levels = <0 11 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <9>;	/* => 90 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+	};
+
+	pwm11: dmtimer-pwm {
+		compatible = "ti,omap-dmtimer-pwm";
+		ti,timers = <&timer11>;
+		#pwm-cells = <3>;
+	};
+
 	hsusb2_phy: hsusb2_phy {
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 	};
 
-	tv0: connector@1 {
+	tv0: connector {
 		compatible = "svideo-connector";
 		label = "tv";
 
@@ -126,19 +142,24 @@
 
 			port@0 {
 				reg = <0>;
-				opa_in: endpoint@0 {
+				opa_in: endpoint {
 					remote-endpoint = <&venc_out>;
 				};
 			};
 
 			port@1 {
 				reg = <1>;
-				opa_out: endpoint@0 {
+				opa_out: endpoint {
 					remote-endpoint = <&tv_connector_in>;
 				};
 			};
 		};
 	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>;	/* W2CBW003 reset through tca6507 */
+	};
 };
 
 &omap3_pmx_core {
@@ -190,6 +211,12 @@
 		>;
 	};
 
+	backlight_pins: backlight_pins_pimnux {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3)		/* gpt11/gpio57 */
+		>;
+	};
+
 	dss_dpi_pins: pinmux_dss_dpi_pins {
                pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
@@ -228,6 +255,24 @@
 			OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
 		>;
 	};
+
+	bma180_pins: pinmux_bma180_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */
+		>;
+	};
+
+	itg3200_pins: pinmux_itg3200_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio56 */
+		>;
+	};
+
+	hmc5843_pins: pinmux_hmc5843_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */
+		>;
+	};
 };
 
 &omap3_pmx_core2 {
@@ -298,6 +343,8 @@
 	bma180@41 {
 		compatible = "bosch,bma180";
 		reg = <0x41>;
+		pinctrl-names = "default";
+		pintcrl-0 = <&bma180_pins>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
 	};
@@ -306,12 +353,14 @@
 	itg3200@68 {
 		compatible = "invensense,itg3200";
 		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&itg3200_pins>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <24 0>; /* GPIO_56 */
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>; /* GPIO_56 */
 	};
 
-	/* leds */
-	tca6507@45 {
+	/* leds + gpios */
+	tca6507: tca6507@45 {
 		compatible = "ti,tca6507";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -351,6 +400,10 @@
 	hmc5843@1e {
 		compatible = "honeywell,hmc5883l";
 		reg = <0x1e>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hmc5843_pins>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;	/* gpio112 */
 	};
 
 	/* touchscreen */
@@ -362,6 +415,12 @@
 		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
 		ti,x-plate-ohms = <600>;
 	};
+
+	/* RFID EEPROM */
+	m24lr64@50 {
+		compatible = "at,24c64";
+		reg = <0x50>;
+	};
 };
 
 &i2c3 {
@@ -398,6 +457,7 @@
 	bus-width = <4>;
 	ti,non-removable;
 	cap-power-off-card;
+	mmc-pwrseq = <&wifi_pwrseq>;
 };
 
 &mmc3 {
diff --git a/src/arm/omap3-ha-lcd.dts b/src/arm/omap3-ha-lcd.dts
index 11aa28d73f3a..60af7c2358a3 100644
--- a/src/arm/omap3-ha-lcd.dts
+++ b/src/arm/omap3-ha-lcd.dts
@@ -121,7 +121,7 @@
 		display0 = &lcd0;
 	};
 
-	lcd0: display@0 {
+	lcd0: display {
 		compatible = "panel-dpi";
 		label = "lcd";
 
diff --git a/src/arm/omap3-igep.dtsi b/src/arm/omap3-igep.dtsi
index f4f2ce46d681..54c4c07bbe4a 100644
--- a/src/arm/omap3-igep.dtsi
+++ b/src/arm/omap3-igep.dtsi
@@ -13,7 +13,7 @@
 #include "omap36xx.dtsi"
 
 / {
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
diff --git a/src/arm/omap3-igep0020-common.dtsi b/src/arm/omap3-igep0020-common.dtsi
index b6971060648a..667f96245729 100644
--- a/src/arm/omap3-igep0020-common.dtsi
+++ b/src/arm/omap3-igep0020-common.dtsi
@@ -60,7 +60,7 @@
 		vcc-supply = <&hsusb1_power>;
 	};
 
-	tfp410: encoder@0 {
+	tfp410: encoder {
 		compatible = "ti,tfp410";
 		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
 
@@ -71,7 +71,7 @@
 			port@0 {
 				reg = <0>;
 
-				tfp410_in: endpoint@0 {
+				tfp410_in: endpoint {
 					remote-endpoint = <&dpi_out>;
 				};
 			};
@@ -79,14 +79,14 @@
 			port@1 {
 				reg = <1>;
 
-				tfp410_out: endpoint@0 {
+				tfp410_out: endpoint {
 					remote-endpoint = <&dvi_connector_in>;
 				};
 			};
 		};
 	};
 
-	dvi0: connector@0 {
+	dvi0: connector {
 		compatible = "dvi-connector";
 		label = "dvi";
 
diff --git a/src/arm/omap3-ldp.dts b/src/arm/omap3-ldp.dts
index 2f353dadfa40..e28fe13cb007 100644
--- a/src/arm/omap3-ldp.dts
+++ b/src/arm/omap3-ldp.dts
@@ -15,7 +15,7 @@
 	model = "TI OMAP3430 LDP (Zoom1 Labrador)";
 	compatible = "ti,omap3-ldp", "ti,omap3";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x8000000>; /* 128 MB */
 	};
diff --git a/src/arm/omap3-lilly-a83x.dtsi b/src/arm/omap3-lilly-a83x.dtsi
index eff816e0bc0a..fa611a5e4850 100644
--- a/src/arm/omap3-lilly-a83x.dtsi
+++ b/src/arm/omap3-lilly-a83x.dtsi
@@ -17,7 +17,7 @@
 			bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x8000000>;   /* 128 MB */
 	};
diff --git a/src/arm/omap3-n900.dts b/src/arm/omap3-n900.dts
index 2b74a81d1de2..4d448f145ed1 100644
--- a/src/arm/omap3-n900.dts
+++ b/src/arm/omap3-n900.dts
@@ -54,7 +54,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
@@ -143,6 +143,18 @@
 		io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>;
 		io-channel-names = "temp", "bsi", "vbat";
 	};
+
+	pwm9: dmtimer-pwm {
+		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
+		ti,timers = <&timer9>;
+		ti,clock-source = <0x00>; /* timer_sys_ck */
+	};
+
+	ir: n900-ir {
+		compatible = "nokia,n900-ir";
+		pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
+	};
 };
 
 &omap3_pmx_core {
@@ -722,6 +734,8 @@
 	vmmc_aux-supply = <&vsim>;
 	bus-width = <8>;
 	non-removable;
+	no-sdio;
+	no-sd;
 };
 
 &mmc3 {
diff --git a/src/arm/omap3-n950-n9.dtsi b/src/arm/omap3-n950-n9.dtsi
index 927b17fc4ed8..5d8c4b4a4205 100644
--- a/src/arm/omap3-n950-n9.dtsi
+++ b/src/arm/omap3-n950-n9.dtsi
@@ -24,12 +24,12 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 
-	vemmc: fixedregulator@0 {
+	vemmc: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "VEMMC";
 		regulator-min-microvolt = <2900000>;
@@ -39,7 +39,7 @@
 		enable-active-high;
 	};
 
-	vwlan_fixed: fixedregulator@2 {
+	vwlan_fixed: fixedregulator2 {
 		compatible = "regulator-fixed";
 		regulator-name = "VWLAN";
 		gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */
diff --git a/src/arm/omap3-overo-alto35-common.dtsi b/src/arm/omap3-overo-alto35-common.dtsi
index 3b3a75997f81..99a7eee6e61f 100644
--- a/src/arm/omap3-overo-alto35-common.dtsi
+++ b/src/arm/omap3-overo-alto35-common.dtsi
@@ -44,7 +44,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&button_pins>;
-		button0@10 {
+		button0 {
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;		/* gpio_10 */
diff --git a/src/arm/omap3-overo-base.dtsi b/src/arm/omap3-overo-base.dtsi
index de256fa8da48..401fae838fe9 100644
--- a/src/arm/omap3-overo-base.dtsi
+++ b/src/arm/omap3-overo-base.dtsi
@@ -11,6 +11,12 @@
  */
 
 / {
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
 	pwmleds {
 		compatible = "pwm-leds";
 
@@ -223,7 +229,9 @@
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x20000000>;
+	ranges = <0 0 0x30000000 0x1000000>,	/* CS0 */
+		 <4 0 0x2b000000 0x1000000>,	/* CS4 */
+		 <5 0 0x2c000000 0x1000000>;	/* CS5 */
 
 	nand@0,0 {
 		compatible = "ti,omap2-nand";
diff --git a/src/arm/omap3-overo-chestnut43-common.dtsi b/src/arm/omap3-overo-chestnut43-common.dtsi
index 7df27926ead2..56dbd113430e 100644
--- a/src/arm/omap3-overo-chestnut43-common.dtsi
+++ b/src/arm/omap3-overo-chestnut43-common.dtsi
@@ -37,13 +37,13 @@
 		pinctrl-0 = <&button_pins>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		button0@23 {
+		button0 {
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
 			wakeup-source;
 		};
-		button1@14 {
+		button1 {
 			label = "button1";
 			linux,code = <BTN_1>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
@@ -55,8 +55,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;
diff --git a/src/arm/omap3-overo-common-dvi.dtsi b/src/arm/omap3-overo-common-dvi.dtsi
index 802f704f67e5..ae5564abbe2f 100644
--- a/src/arm/omap3-overo-common-dvi.dtsi
+++ b/src/arm/omap3-overo-common-dvi.dtsi
@@ -69,7 +69,7 @@
 		display0 = &dvi0;
 	};
 
-	tfp410: encoder@0 {
+	tfp410: encoder {
 		compatible = "ti,tfp410";
 
 		ports {
@@ -79,7 +79,7 @@
 			port@0 {
 				reg = <0>;
 
-				tfp410_in: endpoint@0 {
+				tfp410_in: endpoint {
 					remote-endpoint = <&dpi_out>;
 				};
 			};
@@ -87,14 +87,14 @@
 			port@1 {
 				reg = <1>;
 
-				tfp410_out: endpoint@0 {
+				tfp410_out: endpoint {
 					remote-endpoint = <&dvi_connector_in>;
 				};
 			};
 		};
 	};
 
-	dvi0: connector@0 {
+	dvi0: connector {
 		compatible = "dvi-connector";
 		label = "dvi";
 
diff --git a/src/arm/omap3-overo-common-lcd35.dtsi b/src/arm/omap3-overo-common-lcd35.dtsi
index 6314da2580f5..854117dc0b77 100644
--- a/src/arm/omap3-overo-common-lcd35.dtsi
+++ b/src/arm/omap3-overo-common-lcd35.dtsi
@@ -119,7 +119,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcspi1_pins>;
 
-	lcd0: display@0 {
+	lcd0: display@1 {
 		compatible = "lgphilips,lb035q02";
 		label = "lcd35";
 
diff --git a/src/arm/omap3-overo-common-lcd43.dtsi b/src/arm/omap3-overo-common-lcd43.dtsi
index 7e3fe85a8ad9..b0753ef8abd4 100644
--- a/src/arm/omap3-overo-common-lcd43.dtsi
+++ b/src/arm/omap3-overo-common-lcd43.dtsi
@@ -96,7 +96,7 @@
 		display0 = &lcd0;
 	};
 
-	lcd0: display@0 {
+	lcd0: display {
 		compatible = "samsung,lte430wq-f0c", "panel-dpi";
 		label = "lcd43";
 
diff --git a/src/arm/omap3-overo-gallop43-common.dtsi b/src/arm/omap3-overo-gallop43-common.dtsi
index 250cc7fe5d5e..286f5baddf07 100644
--- a/src/arm/omap3-overo-gallop43-common.dtsi
+++ b/src/arm/omap3-overo-gallop43-common.dtsi
@@ -37,13 +37,13 @@
 		pinctrl-0 = <&button_pins>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		button0@23 {
+		button0 {
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
 			wakeup-source;
 		};
-		button1@14 {
+		button1 {
 			label = "button1";
 			linux,code = <BTN_1>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
diff --git a/src/arm/omap3-overo-palo35-common.dtsi b/src/arm/omap3-overo-palo35-common.dtsi
index 8df7ec35d17d..a8020fb42464 100644
--- a/src/arm/omap3-overo-palo35-common.dtsi
+++ b/src/arm/omap3-overo-palo35-common.dtsi
@@ -37,13 +37,13 @@
 		pinctrl-0 = <&button_pins>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		button0@23 {
+		button0 {
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
 			wakeup-source;
 		};
-		button1@14 {
+		button1 {
 			label = "button1";
 			linux,code = <BTN_1>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
diff --git a/src/arm/omap3-overo-palo43-common.dtsi b/src/arm/omap3-overo-palo43-common.dtsi
index 0ea2c451c809..11965737e2c9 100644
--- a/src/arm/omap3-overo-palo43-common.dtsi
+++ b/src/arm/omap3-overo-palo43-common.dtsi
@@ -37,13 +37,13 @@
 		pinctrl-0 = <&button_pins>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		button0@23 {
+		button0 {
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
 			wakeup-source;
 		};
-		button1@14 {
+		button1 {
 			label = "button1";
 			linux,code = <BTN_1>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
diff --git a/src/arm/omap3-overo-tobi-common.dtsi b/src/arm/omap3-overo-tobi-common.dtsi
index 9e24b6a1d07b..1b304e2f1bd2 100644
--- a/src/arm/omap3-overo-tobi-common.dtsi
+++ b/src/arm/omap3-overo-tobi-common.dtsi
@@ -27,8 +27,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;
diff --git a/src/arm/omap3-overo-tobiduo-common.dtsi b/src/arm/omap3-overo-tobiduo-common.dtsi
index 334109e14613..82e98ee3023a 100644
--- a/src/arm/omap3-overo-tobiduo-common.dtsi
+++ b/src/arm/omap3-overo-tobiduo-common.dtsi
@@ -15,9 +15,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <4 0 0x2b000000 0x1000000>,	/* CS4 */
-		 <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	smsc1: ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;
diff --git a/src/arm/omap3-pandora-common.dtsi b/src/arm/omap3-pandora-common.dtsi
index bcf39d606b65..53e007abdc71 100644
--- a/src/arm/omap3-pandora-common.dtsi
+++ b/src/arm/omap3-pandora-common.dtsi
@@ -18,7 +18,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
@@ -27,7 +27,7 @@
 		display0 = &lcd;
 	};
 
-	tv: connector@1 {
+	tv: connector {
 		compatible = "connector-analog-tv";
 		label = "tv";
 
@@ -45,28 +45,28 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
 
-		led@1 {
+		led1 {
 			label = "pandora::sd1";
 			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;	/* GPIO_128 */
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "pandora::sd2";
 			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;	/* GPIO_129 */
 			linux,default-trigger = "mmc1";
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "pandora::bluetooth";
 			gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;	/* GPIO_158 */
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
-		led@4 {
+		led4 {
 			label = "pandora::wifi";
 			gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;	/* GPIO_159 */
 			linux,default-trigger = "mmc2";
diff --git a/src/arm/omap3-sb-t35.dtsi b/src/arm/omap3-sb-t35.dtsi
index 827f614261f6..73643fabde5d 100644
--- a/src/arm/omap3-sb-t35.dtsi
+++ b/src/arm/omap3-sb-t35.dtsi
@@ -3,7 +3,7 @@
  */
 
 / {
-	tfp410: encoder@0 {
+	tfp410: encoder {
 		compatible = "ti,tfp410";
 
 		powerdown-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;  /* gpio_54 */
@@ -18,7 +18,7 @@
 			port@0 {
 				reg = <0>;
 
-				tfp410_in: endpoint@0 {
+				tfp410_in: endpoint {
 					remote-endpoint = <&dpi_out>;
 				};
 			};
@@ -26,14 +26,14 @@
 			port@1 {
 				reg = <1>;
 
-				tfp410_out: endpoint@0 {
+				tfp410_out: endpoint {
 					remote-endpoint = <&dvi_connector_in>;
 				};
 			};
 		};
 	};
 
-	dvi0: connector@0 {
+	dvi0: connector {
 		compatible = "dvi-connector";
 		label = "dvi";
 
diff --git a/src/arm/omap3-sniper.dts b/src/arm/omap3-sniper.dts
index 78a1184cb312..bc4498e77bc9 100644
--- a/src/arm/omap3-sniper.dts
+++ b/src/arm/omap3-sniper.dts
@@ -20,7 +20,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
diff --git a/src/arm/omap3-tao3530.dtsi b/src/arm/omap3-tao3530.dtsi
index 644d3c8ea66a..dc80886b5329 100644
--- a/src/arm/omap3-tao3530.dtsi
+++ b/src/arm/omap3-tao3530.dtsi
@@ -26,7 +26,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/src/arm/omap3-thunder.dts b/src/arm/omap3-thunder.dts
index d659515ab9b8..9736ba79bb5b 100644
--- a/src/arm/omap3-thunder.dts
+++ b/src/arm/omap3-thunder.dts
@@ -85,7 +85,7 @@
 		display0 = &lcd0;
 	};
 
-	lcd0: display@0 {
+	lcd0: display {
 		compatible = "samsung,lte430wq-f0c", "panel-dpi";
 		label = "lcd";
 
diff --git a/src/arm/omap3-zoom3.dts b/src/arm/omap3-zoom3.dts
index c29b41dc7b95..45e2ce0803de 100644
--- a/src/arm/omap3-zoom3.dts
+++ b/src/arm/omap3-zoom3.dts
@@ -20,7 +20,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
diff --git a/src/arm/omap3.dtsi b/src/arm/omap3.dtsi
index 9fbda38528dc..a3ff4933dbc1 100644
--- a/src/arm/omap3.dtsi
+++ b/src/arm/omap3.dtsi
@@ -12,11 +12,12 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/omap.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "ti,omap3430", "ti,omap3";
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
 
 	aliases {
 		i2c0 = &i2c1;
@@ -78,7 +79,7 @@
 	 * the moment, just use a fake OCP bus entry to represent the whole bus
 	 * hierarchy.
 	 */
-	ocp {
+	ocp@68000000 {
 		compatible = "ti,omap3-l3-smx", "simple-bus";
 		reg = <0x68000000 0x10000>;
 		interrupts = <9 10>;
@@ -106,6 +107,7 @@
 					reg = <0x30 0x238>;
 					#address-cells = <1>;
 					#size-cells = <0>;
+					#pinctrl-cells = <1>;
 					#interrupt-cells = <1>;
 					interrupt-controller;
 					pinctrl-single,register-width = <16>;
@@ -145,6 +147,7 @@
 					reg = <0xa00 0x5c>;
 					#address-cells = <1>;
 					#size-cells = <0>;
+					#pinctrl-cells = <1>;
 					#interrupt-cells = <1>;
 					interrupt-controller;
 					pinctrl-single,register-width = <16>;
@@ -493,6 +496,8 @@
 			dmas = <&sdma 31>,
 			       <&sdma 32>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp1_fck>;
+			clock-names = "fck";
 			status = "disabled";
 		};
 
@@ -511,6 +516,8 @@
 			dmas = <&sdma 33>,
 			       <&sdma 34>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp2_fck>, <&mcbsp2_ick>;
+			clock-names = "fck", "ick";
 			status = "disabled";
 		};
 
@@ -529,6 +536,8 @@
 			dmas = <&sdma 17>,
 			       <&sdma 18>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp3_fck>, <&mcbsp3_ick>;
+			clock-names = "fck", "ick";
 			status = "disabled";
 		};
 
@@ -545,6 +554,8 @@
 			dmas = <&sdma 19>,
 			       <&sdma 20>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp4_fck>;
+			clock-names = "fck";
 			status = "disabled";
 		};
 
@@ -561,6 +572,8 @@
 			dmas = <&sdma 21>,
 			       <&sdma 22>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp5_fck>;
+			clock-names = "fck";
 			status = "disabled";
 		};
 
diff --git a/src/arm/omap3430-sdp.dts b/src/arm/omap3430-sdp.dts
index a0dc8d854142..abd6921143be 100644
--- a/src/arm/omap3430-sdp.dts
+++ b/src/arm/omap3430-sdp.dts
@@ -13,7 +13,7 @@
 	model = "TI OMAP3430 SDP";
 	compatible = "ti,omap3430-sdp", "ti,omap3";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/src/arm/omap34xx.dtsi b/src/arm/omap34xx.dtsi
index e44656258225..834fdf13601f 100644
--- a/src/arm/omap34xx.dtsi
+++ b/src/arm/omap34xx.dtsi
@@ -28,12 +28,13 @@
 		};
 	};
 
-	ocp {
+	ocp@68000000 {
 		omap3_pmx_core2: pinmux@480025d8 {
 			compatible = "ti,omap3-padconf", "pinctrl-single";
 			reg = <0x480025d8 0x24>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#pinctrl-cells = <1>;
 			#interrupt-cells = <1>;
 			interrupt-controller;
 			pinctrl-single,register-width = <16>;
diff --git a/src/arm/omap36xx.dtsi b/src/arm/omap36xx.dtsi
index 8b7979153008..d1a3e56b50ce 100644
--- a/src/arm/omap36xx.dtsi
+++ b/src/arm/omap36xx.dtsi
@@ -30,7 +30,7 @@
 		};
 	};
 
-	ocp {
+	ocp@68000000 {
 		uart4: serial@49042000 {
 			compatible = "ti,omap3-uart";
 			reg = <0x49042000 0x400>;
@@ -66,6 +66,7 @@
 			reg = <0x480025a0 0x5c>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#pinctrl-cells = <1>;
 			#interrupt-cells = <1>;
 			interrupt-controller;
 			pinctrl-single,register-width = <16>;
diff --git a/src/arm/omap4-droid4-xt894.dts b/src/arm/omap4-droid4-xt894.dts
new file mode 100644
index 000000000000..f3ccb4ceed9e
--- /dev/null
+++ b/src/arm/omap4-droid4-xt894.dts
@@ -0,0 +1,188 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap443x.dtsi"
+
+/ {
+	model = "Motorola Droid 4 XT894";
+	compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	/*
+	 * We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
+	 * then 1023 - 1024 seems to contain mbm. For SRAM, see the notes
+	 * below about SRAM and L3_ICLK2 being unused by default,
+	 */
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x3fd00000>;	/* 1021 MB */
+	};
+
+	/* CPCAP really supports 1650000 to 3400000 range */
+	vmmc: regulator-mmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-always-on;
+	};
+
+	/* CPCAP really supports 3000000 to 3100000 range */
+	vemmc: regulator-emmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vemmc";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-always-on;
+	};
+
+	/* CPCAP really supports 1650000 to 1950000 range */
+	wl12xx_vmmc: regulator-wl12xx {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1650000>;
+		regulator-max-microvolt = <1650000>;
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;	/* gpio94 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+/* L3_2 interconnect is unused, SRAM, GPMC and L3_ICLK2 disabled */
+&gpmc {
+	status = "disabled";
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc>;
+	bus-width = <4>;
+	cd-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;	/* gpio106 */
+};
+
+&mmc2 {
+	vmmc-supply = <&vemmc>;
+	bus-width = <8>;
+	non-removable;
+};
+
+&mmc3 {
+	vmmc-supply = <&wl12xx_vmmc>;
+	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core 0xde>;
+
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1283";
+		reg = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; /* gpio100 */
+		ref-clock-frequency = <26000000>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+/* L3_2 interconnect is unused, SRAM, GPMC and L3_ICLK2 disabled */
+&ocmcram {
+	status = "disabled";
+};
+
+&omap4_pmx_core {
+	usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins {
+		/* gpio_60 */
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)
+		>;
+	};
+
+	usb_ulpi_pins: pinmux_usb_ulpi_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x196, MUX_MODE7)
+		OMAP4_IOPAD(0x198, MUX_MODE7)
+		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	/* usb0_otg_dp and usb0_otg_dm */
+	usb_utmi_pins: pinmux_usb_utmi_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)
+		OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0)
+		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+
+	/* uart3_tx_irtx and uart3_rx_irrx */
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x196, MUX_MODE7)
+		OMAP4_IOPAD(0x198, MUX_MODE7)
+		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1ba, MUX_MODE2)
+		OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2)
+		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+};
+
+&omap4_pmx_wkup {
+	usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
+		/* gpio_wk0 */
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
+		>;
+	};
+};
+
+&uart3 {
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core 0x17c>;
+};
+
+/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
+&usb_otg_hs {
+	interface-type = <1>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/src/arm/omap4-duovero-parlor.dts b/src/arm/omap4-duovero-parlor.dts
index 06c54822ddc2..1b825128a7b9 100644
--- a/src/arm/omap4-duovero-parlor.dts
+++ b/src/arm/omap4-duovero-parlor.dts
@@ -32,7 +32,7 @@
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		button0@121 {
+		button0 {
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;	/* gpio_121 */
@@ -40,7 +40,7 @@
 		};
 	};
 
-	hdmi0: connector@0 {
+	hdmi0: connector {
 		compatible = "hdmi-connector";
 		label = "hdmi";
 
diff --git a/src/arm/omap4-duovero.dtsi b/src/arm/omap4-duovero.dtsi
index f2a94fa62552..ec0bd9779e1a 100644
--- a/src/arm/omap4-duovero.dtsi
+++ b/src/arm/omap4-duovero.dtsi
@@ -12,7 +12,7 @@
 	model = "Gumstix Duovero";
 	compatible = "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
@@ -177,6 +177,7 @@
 
 	twl6040: twl@4b {
 		compatible = "ti,twl6040";
+		#clock-cells = <0>;
 		reg = <0x4b>;
 		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;		/* IRQ_SYS_2N cascaded to gic */
 		ti,audpwron-gpio = <&gpio6 0 GPIO_ACTIVE_HIGH>;		/* gpio_160 */
@@ -207,6 +208,10 @@
 &mcpdm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcpdm_pins>;
+
+	clocks = <&twl6040>;
+	clock-names = "pdmclk";
+
 	status = "okay";
 };
 
diff --git a/src/arm/omap4-kc1.dts b/src/arm/omap4-kc1.dts
index 2251bd54e4e6..e3763ac75719 100644
--- a/src/arm/omap4-kc1.dts
+++ b/src/arm/omap4-kc1.dts
@@ -13,7 +13,7 @@
 	model = "Amazon Kindle Fire (first generation)";
 	compatible = "amazon,omap4-kc1", "ti,omap4430", "ti,omap4";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
diff --git a/src/arm/omap4-panda-common.dtsi b/src/arm/omap4-panda-common.dtsi
index df2e356ec089..1673689e6705 100644
--- a/src/arm/omap4-panda-common.dtsi
+++ b/src/arm/omap4-panda-common.dtsi
@@ -8,7 +8,7 @@
 #include "elpida_ecb240abacn.dtsi"
 
 / {
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
@@ -103,7 +103,7 @@
 		enable-active-high;
 	};
 
-	tfp410: encoder@0 {
+	tfp410: encoder0 {
 		compatible = "ti,tfp410";
 		powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;	/* gpio_0 */
 
@@ -114,7 +114,7 @@
 			port@0 {
 				reg = <0>;
 
-				tfp410_in: endpoint@0 {
+				tfp410_in: endpoint {
 					remote-endpoint = <&dpi_out>;
 				};
 			};
@@ -122,14 +122,14 @@
 			port@1 {
 				reg = <1>;
 
-				tfp410_out: endpoint@0 {
+				tfp410_out: endpoint {
 					remote-endpoint = <&dvi_connector_in>;
 				};
 			};
 		};
 	};
 
-	dvi0: connector@0 {
+	dvi0: connector0 {
 		compatible = "dvi-connector";
 		label = "dvi";
 
@@ -144,7 +144,7 @@
 		};
 	};
 
-	tpd12s015: encoder@1 {
+	tpd12s015: encoder1 {
 		compatible = "ti,tpd12s015";
 
 		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
@@ -158,7 +158,7 @@
 			port@0 {
 				reg = <0>;
 
-				tpd12s015_in: endpoint@0 {
+				tpd12s015_in: endpoint {
 					remote-endpoint = <&hdmi_out>;
 				};
 			};
@@ -166,14 +166,14 @@
 			port@1 {
 				reg = <1>;
 
-				tpd12s015_out: endpoint@0 {
+				tpd12s015_out: endpoint {
 					remote-endpoint = <&hdmi_connector_in>;
 				};
 			};
 		};
 	};
 
-	hdmi0: connector@1 {
+	hdmi0: connector1 {
 		compatible = "hdmi-connector";
 		label = "hdmi";
 
@@ -376,6 +376,7 @@
 
 	twl6040: twl@4b {
 		compatible = "ti,twl6040";
+		#clock-cells = <0>;
 		reg = <0x4b>;
 
 		pinctrl-names = "default";
@@ -445,6 +446,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&wl12xx_pins>;
 	vmmc-supply = <&wl12xx_vmmc>;
+	interrupts-extended = <&wakeupgen GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core 0x10e>;
 	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
@@ -479,6 +482,10 @@
 &mcpdm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcpdm_pins>;
+
+	clocks = <&twl6040>;
+	clock-names = "pdmclk";
+
 	status = "okay";
 };
 
diff --git a/src/arm/omap4-sdp.dts b/src/arm/omap4-sdp.dts
index aae513265dc2..d728ec963111 100644
--- a/src/arm/omap4-sdp.dts
+++ b/src/arm/omap4-sdp.dts
@@ -14,7 +14,7 @@
 	model = "TI OMAP4 SDP board";
 	compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
@@ -160,7 +160,7 @@
 		enable-active-high;
 	};
 
-	tpd12s015: encoder@0 {
+	tpd12s015: encoder {
 		compatible = "ti,tpd12s015";
 
 		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
@@ -174,7 +174,7 @@
 			port@0 {
 				reg = <0>;
 
-				tpd12s015_in: endpoint@0 {
+				tpd12s015_in: endpoint {
 					remote-endpoint = <&hdmi_out>;
 				};
 			};
@@ -182,14 +182,14 @@
 			port@1 {
 				reg = <1>;
 
-				tpd12s015_out: endpoint@0 {
+				tpd12s015_out: endpoint {
 					remote-endpoint = <&hdmi_connector_in>;
 				};
 			};
 		};
 	};
 
-	hdmi0: connector@0 {
+	hdmi0: connector {
 		compatible = "hdmi-connector";
 		label = "hdmi";
 
@@ -367,6 +367,7 @@
 
 	twl6040: twl@4b {
 		compatible = "ti,twl6040";
+		#clock-cells = <0>;
 		reg = <0x4b>;
 
 		pinctrl-names = "default";
@@ -620,6 +621,10 @@
 &mcpdm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcpdm_pins>;
+
+	clocks = <&twl6040>;
+	clock-names = "pdmclk";
+
 	status = "okay";
 };
 
diff --git a/src/arm/omap4-var-om44customboard.dtsi b/src/arm/omap4-var-om44customboard.dtsi
index 6e278d7716a5..74940b6d7719 100644
--- a/src/arm/omap4-var-om44customboard.dtsi
+++ b/src/arm/omap4-var-om44customboard.dtsi
@@ -45,7 +45,7 @@
 		};
 	};
 
-	hdmi0: connector@0 {
+	hdmi0: connector {
 		compatible = "hdmi-connector";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hdmi_hpd_pins>;
diff --git a/src/arm/omap4-var-som-om44.dtsi b/src/arm/omap4-var-som-om44.dtsi
index a17997f4e9aa..758b6eb7ae43 100644
--- a/src/arm/omap4-var-som-om44.dtsi
+++ b/src/arm/omap4-var-som-om44.dtsi
@@ -12,7 +12,7 @@
 	model = "Variscite VAR-SOM-OM44";
 	compatible = "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
@@ -189,6 +189,7 @@
 
 	twl6040: twl@4b {
 		compatible = "ti,twl6040";
+		#clock-cells = <0>;
 		reg = <0x4b>;
 
 		pinctrl-names = "default";
@@ -252,6 +253,10 @@
 &mcpdm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcpdm_pins>;
+
+	clocks = <&twl6040>;
+	clock-names = "pdmclk";
+
 	status = "okay";
 };
 
diff --git a/src/arm/omap4.dtsi b/src/arm/omap4.dtsi
index 3fdc51cd0fad..578c53f08309 100644
--- a/src/arm/omap4.dtsi
+++ b/src/arm/omap4.dtsi
@@ -10,11 +10,12 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/omap.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "ti,omap4430", "ti,omap4";
 	interrupt-parent = <&wakeupgen>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
 
 	aliases {
 		i2c0 = &i2c1;
@@ -184,6 +185,7 @@
 					reg = <0x40 0x0196>;
 					#address-cells = <1>;
 					#size-cells = <0>;
+					#pinctrl-cells = <1>;
 					#interrupt-cells = <1>;
 					interrupt-controller;
 					pinctrl-single,register-width = <16>;
@@ -256,6 +258,7 @@
 					reg = <0x1e040 0x0038>;
 					#address-cells = <1>;
 					#size-cells = <0>;
+					#pinctrl-cells = <1>;
 					#interrupt-cells = <1>;
 					interrupt-controller;
 					pinctrl-single,register-width = <16>;
diff --git a/src/arm/omap5-board-common.dtsi b/src/arm/omap5-board-common.dtsi
index 5d5b620b7d9b..4caadb253249 100644
--- a/src/arm/omap5-board-common.dtsi
+++ b/src/arm/omap5-board-common.dtsi
@@ -77,17 +77,7 @@
 		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
 	};
 
-	leds {
-		compatible = "gpio-leds";
-		led@1 {
-			label = "omap5:blue:usr1";
-			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-
-	tpd12s015: encoder@0 {
+	tpd12s015: encoder {
 		compatible = "ti,tpd12s015";
 
 		pinctrl-names = "default";
@@ -102,7 +92,7 @@
 			port@0 {
 				reg = <0>;
 
-				tpd12s015_in: endpoint@0 {
+				tpd12s015_in: endpoint {
 					remote-endpoint = <&hdmi_out>;
 				};
 			};
@@ -110,14 +100,14 @@
 			port@1 {
 				reg = <1>;
 
-				tpd12s015_out: endpoint@0 {
+				tpd12s015_out: endpoint {
 					remote-endpoint = <&hdmi_connector_in>;
 				};
 			};
 		};
 	};
 
-	hdmi0: connector@0 {
+	hdmi0: connector {
 		compatible = "hdmi-connector";
 		label = "hdmi";
 
@@ -134,6 +124,7 @@
 		compatible = "ti,abe-twl6040";
 		ti,model = "omap5-uevm";
 
+		ti,jack-detection;
 		ti,mclk-freq = <19200000>;
 
 		ti,mcpdm = <&mcpdm>;
@@ -332,7 +323,7 @@
 
 	wlcore_irq_pin: pinmux_wlcore_irq_pin {
 		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x40, PIN_INPUT_PULLUP | MUX_MODE6)	/* llia_wakereqin.gpio1_wk14 */
+			OMAP5_IOPAD(0x40, PIN_INPUT | MUX_MODE6)	/* llia_wakereqin.gpio1_wk14 */
 		>;
 	};
 };
@@ -355,15 +346,17 @@
 	non-removable;
 	cap-power-off-card;
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins &wlcore_irq_pin>;
-	interrupts-extended = <&gic GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
-			       &omap5_pmx_core 0x168>;
+	pinctrl-0 = <&mmc3_pins>;
+	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
+			       &omap5_pmx_core 0x16a>;
 
 	#address-cells = <1>;
 	#size-cells = <0>;
 	wlcore: wlcore@2 {
 		compatible = "ti,wl1271";
 		reg = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlcore_irq_pin>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;	/* gpio 14 */
 		ref-clock-frequency = <26000000>;
@@ -391,14 +384,23 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		ti,system-power-controller;
+		ti,mux-pad1 = <0xa1>;
+		ti,mux-pad2 = <0x1b>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>;
 
+		palmas_gpio: gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
 		extcon_usb3: palmas_usb {
 			compatible = "ti,palmas-usb-vid";
 			ti,enable-vbus-detection;
 			ti,enable-id-detection;
 			ti,wakeup;
+			id-gpios = <&palmas_gpio 0 GPIO_ACTIVE_HIGH>;
 		};
 
 		clk32kgaudio: palmas_clk32k@1 {
@@ -414,7 +416,7 @@
 			ti,backup-battery-charge-high-current;
 		};
 
-		gpadc {
+		gpadc: gpadc {
 			compatible = "ti,palmas-gpadc";
 			interrupts = <18 0
 				      16 0
@@ -474,8 +476,8 @@
 				smps6_reg: smps6 {
 					/* VDD_DDR3 - over VDD_SMPS6 */
 					regulator-name = "smps6";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
@@ -637,6 +639,7 @@
 
 	twl6040: twl@4b {
 		compatible = "ti,twl6040";
+		#clock-cells = <0>;
 		reg = <0x4b>;
 
 		pinctrl-names = "default";
@@ -658,6 +661,10 @@
 &mcpdm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcpdm_pins>;
+
+	clocks = <&twl6040>;
+	clock-names = "pdmclk";
+
 	status = "okay";
 };
 
diff --git a/src/arm/omap5-cm-t54.dts b/src/arm/omap5-cm-t54.dts
index 93fdfa96776e..b153f604932a 100644
--- a/src/arm/omap5-cm-t54.dts
+++ b/src/arm/omap5-cm-t54.dts
@@ -11,9 +11,9 @@
 	model = "CompuLab CM-T54";
 	compatible = "compulab,omap5-cm-t54", "ti,omap5";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
-		reg = <0x80000000 0x7F000000>; /* 2048 MB */
+		reg = <0 0x80000000 0 0x7f000000>; /* 2048 MB */
 	};
 
 	aliases {
@@ -72,7 +72,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		led@1 {
+		led1 {
 			label = "Heartbeat";
 			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 ACT_LED */
 			linux,default-trigger = "heartbeat";
@@ -112,7 +112,7 @@
                 };
         };
 
-	hdmi0: connector@0 {
+	hdmi0: connector0 {
 		compatible = "hdmi-connector";
 		label = "hdmi";
 
@@ -130,7 +130,7 @@
 		};
 	};
 
-	tfp410: encoder@0 {
+	tfp410: encoder0 {
 		compatible = "ti,tfp410";
 
 		ports {
@@ -140,7 +140,7 @@
 			port@0 {
 				reg = <0>;
 
-				tfp410_in: endpoint@0 {
+				tfp410_in: endpoint {
 					remote-endpoint = <&dpi_dvi_out>;
 				};
 			};
@@ -148,14 +148,14 @@
 			port@1 {
 				reg = <1>;
 
-				tfp410_out: endpoint@0 {
+				tfp410_out: endpoint {
 					remote-endpoint = <&dvi_connector_in>;
 				};
 			};
 		};
 	};
 
-	dvi0: connector@1 {
+	dvi0: connector1 {
 		compatible = "dvi-connector";
 		label = "dvi";
 
@@ -646,12 +646,17 @@
 	pinctrl-0 = <&dss_dpi_pins>;
 
 	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		dpi_dvi_out: endpoint@0 {
+			reg = <0>;
 			remote-endpoint = <&tfp410_in>;
 			data-lines = <24>;
 		};
 
 		dpi_lcd_out: endpoint@1 {
+			reg = <1>;
 			remote-endpoint = <&lcd_in>;
 			data-lines = <24>;
 		};
diff --git a/src/arm/omap5-igep0050.dts b/src/arm/omap5-igep0050.dts
index f75ce02fb398..8fc19218057e 100644
--- a/src/arm/omap5-igep0050.dts
+++ b/src/arm/omap5-igep0050.dts
@@ -7,15 +7,47 @@
  */
 /dts-v1/;
 
+#include <dt-bindings/input/input.h>
 #include "omap5-board-common.dtsi"
 
 / {
 	model = "IGEPv5";
 	compatible = "isee,omap5-igep0050", "ti,omap5";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
-		reg = <0x80000000 0x7f000000>; /* 2032 MB */
+		reg = <0x0 0x80000000 0 0x7f000000>;	/* 2032 MB */
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&power_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led@1 {
+			label = "board:green:usr0";
+			gpios = <&tca6416 1 0>;
+			default-state = "off";
+		};
+		led@2 {
+			label = "board:red:usr1";
+			gpios = <&tca6416 2 0>;
+			default-state = "off";
+		};
+		led@3 {
+			label = "board:blue:usr1";
+			gpios = <&tca6416 3 0>;
+			default-state = "off";
+		};
 	};
 };
 
@@ -58,6 +90,12 @@
 			OMAP5_IOPAD(0x0fa, PIN_INPUT | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
+
+	power_button_pin: pinctrl_power_button_pin {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x086, PIN_INPUT | MUX_MODE6)	/* gpio4_118 */
+		>;
+	};
 };
 
 &tpd12s015 {
diff --git a/src/arm/omap5-uevm.dts b/src/arm/omap5-uevm.dts
index a51e60518eb6..a8c72611fbe3 100644
--- a/src/arm/omap5-uevm.dts
+++ b/src/arm/omap5-uevm.dts
@@ -13,9 +13,98 @@
 	model = "TI OMAP5 uEVM board";
 	compatible = "ti,omap5-uevm", "ti,omap5";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
-		reg = <0x80000000 0x7F000000>; /* 2032 MB */
+		reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			label = "omap5:blue:usr1";
+			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	evm_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&evm_keys_pins>;
+
+		#address-cells = <7>;
+		#size-cells = <0>;
+
+		btn1 {
+			label = "BTN1";
+			linux,code = <169>;
+			gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;	/* gpio3_83 */
+			wakeup-source;
+			autorepeat;
+			debounce_interval = <50>;
+		};
+	};
+
+	evm_leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "omap5:red:led";
+			gpios = <&gpio9 17 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "omap5:green:led";
+			gpios = <&gpio9 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "omap5:blue:led";
+			gpios = <&gpio9 19 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc2";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "omap5:green:led1";
+			gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led5 {
+			label = "omap5:green:led2";
+			gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+			default-state = "off";
+		};
+
+		led6 {
+			label = "omap5:green:led3";
+			gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led7 {
+			label = "omap5:green:led4";
+			gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+			default-state = "off";
+		};
+
+		led8 {
+			label = "omap5:green:led5";
+			gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
 	};
 };
 
@@ -23,6 +112,13 @@
 	vdda-supply = <&ldo4_reg>;
 };
 
+&i2c1 {
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+};
+
 &i2c5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c5_pins>;
@@ -38,6 +134,12 @@
 };
 
 &omap5_pmx_core {
+	evm_keys_pins: pinmux_evm_keys_gpio_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0b6, PIN_INPUT | MUX_MODE6)	/* gpio3_83 */
+		>;
+	};
+
 	i2c5_pins: pinmux_i2c5_pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x1c6, PIN_INPUT | MUX_MODE0)		/* i2c5_scl */
@@ -61,3 +163,7 @@
 		OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
 	>;
 };
+
+&wlcore {
+	compatible = "ti,wl1837";
+};
diff --git a/src/arm/omap5.dtsi b/src/arm/omap5.dtsi
index 84c10195e79b..0844737b72b2 100644
--- a/src/arm/omap5.dtsi
+++ b/src/arm/omap5.dtsi
@@ -11,14 +11,13 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/omap.h>
 
-#include "skeleton.dtsi"
-
 / {
-	#address-cells = <1>;
-	#size-cells = <1>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 
 	compatible = "ti,omap5";
 	interrupt-parent = <&wakeupgen>;
+	chosen { };
 
 	aliases {
 		i2c0 = &i2c1;
@@ -92,10 +91,10 @@
 		compatible = "arm,cortex-a15-gic";
 		interrupt-controller;
 		#interrupt-cells = <3>;
-		reg = <0x48211000 0x1000>,
-		      <0x48212000 0x1000>,
-		      <0x48214000 0x2000>,
-		      <0x48216000 0x2000>;
+		reg = <0 0x48211000 0 0x1000>,
+		      <0 0x48212000 0 0x1000>,
+		      <0 0x48214000 0 0x2000>,
+		      <0 0x48216000 0 0x2000>;
 		interrupt-parent = <&gic>;
 	};
 
@@ -103,7 +102,7 @@
 		compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
 		interrupt-controller;
 		#interrupt-cells = <3>;
-		reg = <0x48281000 0x1000>;
+		reg = <0 0x48281000 0 0x1000>;
 		interrupt-parent = <&gic>;
 	};
 
@@ -131,11 +130,11 @@
 		compatible = "ti,omap5-l3-noc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges;
+		ranges = <0 0 0 0xc0000000>;
 		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
-		reg = <0x44000000 0x2000>,
-		      <0x44800000 0x3000>,
-		      <0x45000000 0x4000>;
+		reg = <0 0x44000000 0 0x2000>,
+		      <0 0x44800000 0 0x3000>,
+		      <0 0x45000000 0 0x4000>;
 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -173,6 +172,7 @@
 					reg = <0x40 0x01b6>;
 					#address-cells = <1>;
 					#size-cells = <0>;
+					#pinctrl-cells = <1>;
 					#interrupt-cells = <1>;
 					interrupt-controller;
 					pinctrl-single,register-width = <16>;
@@ -272,6 +272,7 @@
 				reg = <0xc840 0x003c>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				#pinctrl-cells = <1>;
 				#interrupt-cells = <1>;
 				interrupt-controller;
 				pinctrl-single,register-width = <16>;
@@ -865,7 +866,7 @@
 			#size-cells = <1>;
 			utmi-mode = <2>;
 			ranges;
-			dwc3@4a030000 {
+			dwc3: dwc3@4a030000 {
 				compatible = "snps,dwc3";
 				reg = <0x4a030000 0x10000>;
 				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
@@ -987,6 +988,7 @@
 			phy-names = "sata-phy";
 			clocks = <&sata_ref_clk>;
 			ti,hwmods = "sata";
+			ports-implemented = <0x1>;
 		};
 
 		dss: dss@58000000 {
diff --git a/src/arm/orion5x-linkstation-lschl.dts b/src/arm/orion5x-linkstation-lschl.dts
new file mode 100644
index 000000000000..ea6c881634b9
--- /dev/null
+++ b/src/arm/orion5x-linkstation-lschl.dts
@@ -0,0 +1,171 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-CHLv3
+ *
+ * Copyright (C) 2016 Ash Hughes <ashley.hughes@blueyonder.co.uk>
+ * Copyright (C) 2015-2017
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "orion5x-linkstation.dtsi"
+#include "mvebu-linkstation-gpio-simple.dtsi"
+#include "mvebu-linkstation-fan.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Buffalo Linkstation LiveV3 (LS-CHL)";
+	compatible = "buffalo,lschl", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	gpio_keys {
+		func {
+			label = "Function Button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		power-on-switch {
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+
+		power-auto-switch {
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		pinctrl-0 = <&pmx_led_power &pmx_led_alarm &pmx_led_info &pmx_led_func>;
+		blue-power-led {
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		red-alarm-led {
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		amber-info-led {
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		func {
+			label = "lschl:func:blue:top";
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_fan {
+		gpios = <&gpio0 14 GPIO_ACTIVE_LOW
+			 &gpio0 16 GPIO_ACTIVE_LOW>;
+
+		alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl {
+	pmx_led_power: pmx-leds {
+		marvell,pins = "mpp0";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_hdd: pmx-power-hdd {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_alarm: pmx-leds {
+		marvell,pins = "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_info: pmx-leds {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_lock: pmx-fan-lock {
+		marvell,pins = "mpp6";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_switch: pmx-power-switch {
+		marvell,pins = "mpp8", "mpp10", "mpp15";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_usb: pmx-power-usb {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_high: pmx-fan-high {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_low: pmx-fan-low {
+		marvell,pins = "mpp16";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_func: pmx-leds {
+		marvell,pins = "mpp17";
+		marvell,function = "gpio";
+	};
+
+	pmx_sw_init: pmx-sw-init {
+		marvell,pins = "mpp7";
+		marvell,function = "gpio";
+	};
+};
+
+&hdd_power {
+	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_power {
+	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+};
+
diff --git a/src/arm/orion5x-linkstation-lsgl.dts b/src/arm/orion5x-linkstation-lsgl.dts
index 1cf644bfd7ea..51dc734cd5b9 100644
--- a/src/arm/orion5x-linkstation-lsgl.dts
+++ b/src/arm/orion5x-linkstation-lsgl.dts
@@ -82,6 +82,10 @@
 	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
 };
 
+&sata {
+	nr-ports = <2>;
+};
+
 &ehci1 {
 	status = "okay";
 };
diff --git a/src/arm/orion5x-mv88f5181.dtsi b/src/arm/orion5x-mv88f5181.dtsi
new file mode 100644
index 000000000000..f667012b26ca
--- /dev/null
+++ b/src/arm/orion5x-mv88f5181.dtsi
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "orion5x.dtsi"
+
+/ {
+	compatible = "marvell,orion5x-88f5181", "marvell,orion5x";
+
+	soc {
+		compatible = "marvell,orion5x-88f5181-mbus", "simple-bus";
+
+		internal-regs {
+			pinctrl: pinctrl@10000 {
+				compatible = "marvell,88f5181-pinctrl";
+				reg = <0x10000 0x8>, <0x10050 0x4>;
+			};
+
+			core_clk: core-clocks@10030 {
+				compatible = "marvell,mv88f5181-core-clock";
+				reg = <0x10010 0x4>;
+				#clock-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x1500 0x20>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pmx_ge: pmx-ge {
+		marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11",
+			       "mpp12", "mpp13", "mpp14", "mpp15",
+			       "mpp16", "mpp17", "mpp18", "mpp19";
+		marvell,function = "ge";
+	};
+};
+
+&eth {
+	pinctrl-0 = <&pmx_ge>;
+	pinctrl-names = "default";
+};
diff --git a/src/arm/orion5x-netgear-wnr854t.dts b/src/arm/orion5x-netgear-wnr854t.dts
new file mode 100644
index 000000000000..9f6ae4e1de06
--- /dev/null
+++ b/src/arm/orion5x-netgear-wnr854t.dts
@@ -0,0 +1,251 @@
+/*
+ * Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "orion5x-mv88f5181.dtsi"
+
+/ {
+	model = "Netgear WNR854-t";
+	compatible = "netgear,wnr854t", "marvell,orion5x-88f5181",
+		     "marvell,orion5x";
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory {
+		reg = <0x00000000 0x2000000>; /* 32 MB */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x800000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_reset_button>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_power_led &pmx_power_led_blink &pmx_wan_led>;
+		pinctrl-names = "default";
+
+		led@0 {
+			label = "wnr854t:green:power";
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led@1 {
+			label = "wnr854t:blink:power";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led@2 {
+			label = "wnr854t:green:wan";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	devbus,keep-config;
+
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x800000>;
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x0 0x100000>;
+			};
+
+			partition@100000 {
+				label = "rootfs";
+				reg = <0x100000 0x660000>;
+			};
+
+			partition@760000 {
+				label = "uboot_env";
+				reg = <0x760000 0x20000>;
+			};
+
+			partition@780000 {
+				label = "uboot";
+				reg = <0x780000 0x80000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	switch: switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		dsa,member = <0 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan3";
+				phy-handle = <&lan3phy>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan4";
+				phy-handle = <&lan4phy>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "wan";
+				phy-handle = <&wanphy>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "cpu";
+				ethernet = <&ethport>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "lan1";
+				phy-handle = <&lan1phy>;
+			};
+
+			port@7 {
+				reg = <7>;
+				label = "lan2";
+				phy-handle = <&lan2phy>;
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lan3phy: ethernet-phy@0 {
+				/* Marvell 88E1121R (port 1) */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <0>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+
+			lan4phy: ethernet-phy@1 {
+				/* Marvell 88E1121R (port 2) */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <1>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+
+			wanphy: ethernet-phy@2 {
+				/* Marvell 88E1121R (port 1) */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <2>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+
+			lan1phy: ethernet-phy@5 {
+				/* Marvell 88E1112 */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <5>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+
+			lan2phy: ethernet-phy@7 {
+				/* Marvell 88E1112 */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <7>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+		};
+	};
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		/* Hardwired to DSA switch */
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_pci_gpios>;
+	pinctrl-names = "default";
+
+	pmx_power_led: pmx-power-led {
+		marvell,pins = "mpp0";
+		marvell,function = "gpio";
+	};
+
+	pmx_reset_button: pmx-reset-button {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_led_blink: pmx-power-led-blink {
+		marvell,pins = "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_wan_led: pmx-wan-led {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_pci_gpios: pmx-pci-gpios {
+		marvell,pins = "mpp4";
+		marvell,function = "gpio";
+	};
+};
+
+&uart0 {
+	/* Pin 1: Tx, Pin 7: Rx, Pin 8: Gnd */
+	status = "okay";
+};
diff --git a/src/arm/orion5x.dtsi b/src/arm/orion5x.dtsi
index e1b6d2a2ac49..fbccfbbab223 100644
--- a/src/arm/orion5x.dtsi
+++ b/src/arm/orion5x.dtsi
@@ -144,9 +144,10 @@
 
 			wdt: wdt@20300 {
 				compatible = "marvell,orion-wdt";
-				reg = <0x20300 0x28>;
+				reg = <0x20300 0x28>, <0x20108 0x4>;
 				interrupt-parent = <&bridge_intc>;
 				interrupts = <3>;
+				clocks = <&core_clk 0>;
 				status = "okay";
 			};
 
diff --git a/src/arm/ox820.dtsi b/src/arm/ox820.dtsi
new file mode 100644
index 000000000000..e40f282a023a
--- /dev/null
+++ b/src/arm/ox820.dtsi
@@ -0,0 +1,296 @@
+/*
+ * ox820.dtsi - Device tree file for Oxford Semiconductor OX820 SoC
+ *
+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "oxsemi,ox820";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "oxsemi,ox820-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			clocks = <&armclk>;
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			clocks = <&armclk>;
+			reg = <1>;
+		};
+	};
+
+	memory {
+		/* Max 512MB @ 0x60000000 */
+		reg = <0x60000000 0x20000000>;
+	};
+
+	clocks {
+		osc: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		gmacclk: gmacclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		sysclk: sysclk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&osc>;
+		};
+
+		plla: plla {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <850000000>;
+		};
+
+		armclk: armclk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clocks = <&plla>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&gic>;
+
+		nandc: nand-controller@41000000 {
+			compatible = "oxsemi,ox820-nand";
+			reg = <0x41000000 0x100000>;
+			clocks = <&stdclk 11>;
+			resets = <&reset 15>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		etha: ethernet@40400000 {
+			compatible = "oxsemi,ox820-dwmac", "snps,dwmac";
+			reg = <0x40400000 0x2000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			mac-address = [000000000000]; /* Filled in by U-Boot */
+			phy-mode = "rgmii";
+
+			clocks = <&stdclk 9>, <&gmacclk>;
+			clock-names = "gmac", "stmmaceth";
+			resets = <&reset 6>;
+
+			/* Regmap for sys registers */
+			oxsemi,sys-ctrl = <&sys>;
+
+			status = "disabled";
+		};
+
+		apb-bridge@44000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0 0x44000000 0x1000000>;
+
+			pinctrl: pinctrl {
+				compatible = "oxsemi,ox820-pinctrl";
+
+				/* Regmap for sys registers */
+				oxsemi,sys-ctrl = <&sys>;
+
+				pinctrl_uart0: uart0 {
+					uart0 {
+						pins = "gpio30", "gpio31";
+						function = "fct5";
+					};
+				};
+
+				pinctrl_uart0_modem: uart0_modem {
+					uart0_modem_a {
+						pins = "gpio24", "gpio24", "gpio26", "gpio27";
+						function = "fct4";
+					};
+					uart0_modem_b {
+						pins = "gpio28", "gpio29";
+						function = "fct5";
+					};
+				};
+
+				pinctrl_uart1: uart1 {
+					uart1 {
+						pins = "gpio7", "gpio8";
+						function = "fct4";
+					};
+				};
+
+				pinctrl_uart1_modem: uart1_modem {
+					uart1_modem {
+						pins = "gpio5", "gpio6", "gpio40", "gpio41", "gpio42", "gpio43";
+						function = "fct4";
+					};
+				};
+
+				pinctrl_etha_mdio: etha_mdio {
+					etha_mdio {
+						pins = "gpio3", "gpio4";
+						function = "fct1";
+					};
+				};
+
+				pinctrl_nand: nand {
+					nand {
+						pins = "gpio12", "gpio13", "gpio14", "gpio15",
+						     "gpio16", "gpio17", "gpio18", "gpio19",
+						     "gpio20", "gpio21", "gpio22", "gpio23",
+						     "gpio24";
+						function = "fct1";
+					};
+				};
+			};
+
+			gpio0: gpio@000000 {
+				compatible = "oxsemi,ox820-gpio";
+				reg = <0x000000 0x100000>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <32>;
+				oxsemi,gpio-bank = <0>;
+				gpio-ranges = <&pinctrl 0 0 32>;
+			};
+
+			gpio1: gpio@100000 {
+				compatible = "oxsemi,ox820-gpio";
+				reg = <0x100000 0x100000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <18>;
+				oxsemi,gpio-bank = <1>;
+				gpio-ranges = <&pinctrl 0 32 18>;
+			};
+
+			uart0: serial@200000 {
+			       compatible = "ns16550a";
+			       reg = <0x200000 0x100000>;
+			       interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			       reg-shift = <0>;
+			       fifo-size = <16>;
+			       reg-io-width = <1>;
+			       current-speed = <115200>;
+			       no-loopback-test;
+			       status = "disabled";
+			       clocks = <&sysclk>;
+			       resets = <&reset 17>;
+			};
+
+			uart1: serial@300000 {
+			       compatible = "ns16550a";
+			       reg = <0x200000 0x100000>;
+			       interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			       reg-shift = <0>;
+			       fifo-size = <16>;
+			       reg-io-width = <1>;
+			       current-speed = <115200>;
+			       no-loopback-test;
+			       status = "disabled";
+			       clocks = <&sysclk>;
+			       resets = <&reset 18>;
+			};
+
+			rps@400000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "simple-bus";
+				ranges = <0 0x400000 0x100000>;
+
+				intc: interrupt-controller@0 {
+					compatible = "oxsemi,ox820-rps-irq", "oxsemi,ox810se-rps-irq";
+					interrupt-controller;
+					reg = <0 0x200>;
+					interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+					#interrupt-cells = <1>;
+					valid-mask = <0xFFFFFFFF>;
+					clear-mask = <0>;
+				};
+
+				timer0: timer@200 {
+					compatible = "oxsemi,ox820-rps-timer";
+					reg = <0x200 0x40>;
+					clocks = <&sysclk>;
+					interrupt-parent = <&intc>;
+					interrupts = <4>;
+				};
+			};
+
+			sys: sys-ctrl@e00000 {
+				compatible = "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd";
+				reg = <0xe00000 0x200000>;
+
+				reset: reset-controller {
+					compatible = "oxsemi,ox820-reset", "oxsemi,ox810se-reset";
+					#reset-cells = <1>;
+				};
+
+				stdclk: stdclk {
+					compatible = "oxsemi,ox820-stdclk", "oxsemi,ox810se-stdclk";
+					#clock-cells = <1>;
+				};
+			};
+		};
+
+		apb-bridge@47000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0 0x47000000 0x1000000>;
+
+			scu: scu@0 {
+				compatible = "arm,arm11mp-scu";
+				reg = <0x0 0x100>;
+			};
+
+			local-timer@600 {
+				compatible = "arm,arm11mp-twd-timer";
+				reg = <0x600 0x20>;
+				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3)|IRQ_TYPE_LEVEL_HIGH)>;
+				clocks = <&armclk>;
+			};
+
+			gic: gic@1000 {
+				compatible = "arm,arm11mp-gic";
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				reg = <0x1000 0x1000>,
+				      <0x100 0x500>;
+			};
+		};
+	};
+};
diff --git a/src/arm/pm9g45.dts b/src/arm/pm9g45.dts
index 66afcff67fde..0abd7bf17568 100644
--- a/src/arm/pm9g45.dts
+++ b/src/arm/pm9g45.dts
@@ -21,15 +21,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 		      clock-frequency = <32768>;
 		};
diff --git a/src/arm/pxa25x.dtsi b/src/arm/pxa25x.dtsi
new file mode 100644
index 000000000000..f9f4726396a0
--- /dev/null
+++ b/src/arm/pxa25x.dtsi
@@ -0,0 +1,117 @@
+/*
+ * Copyright (C) 2016 Robert Jarzmik <robert.jarzmik@free.fr>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include "pxa2xx.dtsi"
+#include "dt-bindings/clock/pxa-clock.h"
+
+/ {
+	model = "Marvell PXA25x family SoC";
+	compatible = "marvell,pxa250";
+
+	clocks {
+	       /*
+		* The muxing of external clocks/internal dividers for osc* clock
+		* sources has been hidden under the carpet by now.
+		*/
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clks: pxa2xx_clks@41300004 {
+			compatible = "marvell,pxa250-core-clocks";
+			#clock-cells = <1>;
+			status = "okay";
+		};
+
+		/* timer oscillator */
+		clktimer: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency  = <3686400>;
+			clock-output-names = "ostimer";
+		};
+	};
+
+	pxabus {
+		pdma: dma-controller@40000000 {
+			compatible = "marvell,pdma-1.0";
+			reg = <0x40000000 0x10000>;
+			interrupts = <25>;
+			#dma-channels = <16>;
+			#dma-cells = <2>;
+			#dma-requests = <40>;
+			status = "okay";
+		};
+
+		pxairq: interrupt-controller@40d00000 {
+			marvell,intc-priority;
+			marvell,intc-nr-irqs = <32>;
+		};
+
+		pinctrl: pinctrl@40e00000 {
+			reg = <0x40e00054 0x20 0x40e0000c 0xc 0x40e0010c 4
+			       0x40f00020 0x10>;
+			compatible = "marvell,pxa25x-pinctrl";
+		};
+
+		gpio: gpio@40e00000 {
+			compatible = "intel,pxa25x-gpio";
+			gpio-ranges = <&pinctrl 0 0 84>;
+			clocks = <&clks CLK_NONE>;
+		};
+
+		pwm0: pwm@40b00000 {
+			compatible = "marvell,pxa250-pwm";
+			reg = <0x40b00000 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM0>;
+		};
+
+		pwm1: pwm@40b00010 {
+			compatible = "marvell,pxa250-pwm";
+			reg = <0x40b00010 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM1>;
+		};
+	};
+
+	timer@40a00000 {
+		compatible = "marvell,pxa-timer";
+		reg = <0x40a00000 0x20>;
+		interrupts = <26>;
+		clocks = <&clktimer>;
+		status = "okay";
+	};
+
+	pxa250_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+
+		opp@99532800 {
+			opp-hz = /bits/ 64 <99532800>;
+			opp-microvolt = <1000000 950000 1650000>;
+			clock-latency-ns = <20>;
+		};
+		opp@199065600 {
+			opp-hz = /bits/ 64 <199065600>;
+			opp-microvolt = <1000000 950000 1650000>;
+			clock-latency-ns = <20>;
+		};
+		opp@298598400 {
+			opp-hz = /bits/ 64 <298598400>;
+			opp-microvolt = <1100000 1045000 1650000>;
+			clock-latency-ns = <20>;
+		};
+		opp@398131200 {
+			opp-hz = /bits/ 64 <398131200>;
+			opp-microvolt = <1300000 1235000 1650000>;
+			clock-latency-ns = <20>;
+		};
+	};
+};
diff --git a/src/arm/pxa27x.dtsi b/src/arm/pxa27x.dtsi
index 210192c38df3..e0fab48ba6fa 100644
--- a/src/arm/pxa27x.dtsi
+++ b/src/arm/pxa27x.dtsi
@@ -22,8 +22,15 @@
 			marvell,intc-nr-irqs = <34>;
 		};
 
+		pinctrl: pinctrl@40e00000 {
+			reg = <0x40e00054 0x20 0x40e0000c 0xc 0x40e0010c 4
+			       0x40f00020 0x10>;
+			compatible = "marvell,pxa27x-pinctrl";
+		};
+
 		gpio: gpio@40e00000 {
 			compatible = "intel,pxa27x-gpio";
+			gpio-ranges = <&pinctrl 0 0 128>;
 			clocks = <&clks CLK_NONE>;
 		};
 
@@ -130,4 +137,44 @@
 		clocks = <&clks CLK_OSTIMER>;
 		status = "okay";
 	};
+
+	pxa270_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+
+		opp@104000000 {
+			opp-hz = /bits/ 64 <104000000>;
+			opp-microvolt = <900000 900000 1705000>;
+			clock-latency-ns = <20>;
+		};
+		opp@156000000 {
+			opp-hz = /bits/ 64 <156000000>;
+			opp-microvolt = <1000000 1000000 1705000>;
+			clock-latency-ns = <20>;
+		};
+		opp@208000000 {
+			opp-hz = /bits/ 64 <208000000>;
+			opp-microvolt = <1180000 1180000 1705000>;
+			clock-latency-ns = <20>;
+		};
+		opp@312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <1250000 1250000 1705000>;
+			clock-latency-ns = <20>;
+		};
+		opp@416000000 {
+			opp-hz = /bits/ 64 <416000000>;
+			opp-microvolt = <1350000 1350000 1705000>;
+			clock-latency-ns = <20>;
+		};
+		opp@520000000 {
+			opp-hz = /bits/ 64 <520000000>;
+			opp-microvolt = <1450000 1450000 1705000>;
+			clock-latency-ns = <20>;
+		};
+		opp@624000000 {
+			opp-hz = /bits/ 64 <624000000>;
+			opp-microvolt = <1550000 1550000 1705000>;
+			clock-latency-ns = <20>;
+		};
+	};
 };
diff --git a/src/arm/pxa2xx.dtsi b/src/arm/pxa2xx.dtsi
index 5e5af078b9b5..e4ebcde17837 100644
--- a/src/arm/pxa2xx.dtsi
+++ b/src/arm/pxa2xx.dtsi
@@ -54,8 +54,8 @@
 			reg = <0x40e00000 0x10000>;
 			gpio-controller;
 			#gpio-cells = <0x2>;
-			interrupts = <10>;
-			interrupt-names = "gpio_mux";
+			interrupts = <8>, <9>, <10>;
+			interrupt-names = "gpio0", "gpio1", "gpio_mux";
 			interrupt-controller;
 			#interrupt-cells = <0x2>;
 			ranges;
@@ -140,5 +140,13 @@
 			reg = <0x40900000 0x3c>;
 			interrupts = <30 31>;
 		};
+
+		lcd-controller@40500000 {
+			compatible = "marvell,pxa2xx-lcdc";
+			reg = <0x44000000 0x10000>;
+			interrupts = <17>;
+			clocks = <&clks CLK_LCD>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/src/arm/pxa3xx.dtsi b/src/arm/pxa3xx.dtsi
index fec47bcd8292..7a0cc4ea819a 100644
--- a/src/arm/pxa3xx.dtsi
+++ b/src/arm/pxa3xx.dtsi
@@ -1,6 +1,96 @@
 /* The pxa3xx skeleton simply augments the 2xx version */
 #include "pxa2xx.dtsi"
 
+#define MFP_PIN_PXA300(gpio)				\
+	((gpio <= 2) ? (0x00b4 + 4 * gpio) :		\
+	 (gpio <= 26) ? (0x027c + 4 * (gpio - 3)) :	\
+	 (gpio <= 98) ? (0x0400 + 4 * (gpio - 27)) :	\
+	 (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) :	\
+	 0)
+
+#define MFP_PIN_PXA310(gpio)				\
+	((gpio <= 2) ? (0x00b4 + 4 * gpio) :		\
+	 (gpio <= 26) ? (0x027c + 4 * (gpio - 3)) :	\
+	 (gpio <= 29) ? (0x0400 + 4 * (gpio - 27)) :	\
+	 (gpio <= 98) ? (0x0418 + 4 * (gpio - 30)) :	\
+	 (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) :	\
+	 (gpio <= 262) ? 0 :				\
+	 (gpio <= 268) ? (0x052c + 4 * (gpio - 263)) :	\
+	 0)
+
+#define MFP_PIN_PXA320(gpio)				\
+	((gpio <= 4) ? (0x0124 + 4 * gpio) :		\
+	 (gpio <= 9) ? (0x028c + 4 * (gpio - 5)) :	\
+	 (gpio <= 10) ? (0x0458 + 4 * (gpio - 10)) :	\
+	 (gpio <= 26) ? (0x02a0 + 4 * (gpio - 11)) :	\
+	 (gpio <= 48) ? (0x0400 + 4 * (gpio - 27)) :	\
+	 (gpio <= 62) ? (0x045c + 4 * (gpio - 49)) :	\
+	 (gpio <= 73) ? (0x04b4 + 4 * (gpio - 63)) :	\
+	 (gpio <= 98) ? (0x04f0 + 4 * (gpio - 74)) :	\
+	 (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) :	\
+	 0)
+
+/*
+ * MFP Alternate functions for pins having a gpio.
+ * Example of use: pinctrl-single,pins = < MFP_PIN_PXA310(21) MFP_AF1 >
+ */
+#define MFP_AF0		(0 << 0)
+#define MFP_AF1		(1 << 0)
+#define MFP_AF2		(2 << 0)
+#define MFP_AF3		(3 << 0)
+#define MFP_AF4		(4 << 0)
+#define MFP_AF5		(5 << 0)
+#define MFP_AF6		(6 << 0)
+
+/*
+ * MFP drive strength functions for pins.
+ * Example of use: pinctrl-single,drive-strength = MFP_DS03X;
+ */
+#define MFP_DSMSK	(0x7 << 10)
+#define MFP_DS01X	< (0x0 << 10) MFP_DSMSK >
+#define MFP_DS02X	< (0x1 << 10) MFP_DSMSK >
+#define MFP_DS03X	< (0x2 << 10) MFP_DSMSK >
+#define MFP_DS04X	< (0x3 << 10) MFP_DSMSK >
+#define MFP_DS06X	< (0x4 << 10) MFP_DSMSK >
+#define MFP_DS08X	< (0x5 << 10) MFP_DSMSK >
+#define MFP_DS10X	< (0x6 << 10) MFP_DSMSK >
+#define MFP_DS13X	< (0x7 << 10) MFP_DSMSK >
+
+/*
+ * MFP low power mode for pins.
+ * Example of use:
+ *   pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW|MFP_LPM_EDGE_FALL);
+ *
+ * Table that determines the low power modes outputs, with actual settings
+ * used in parentheses for don't-care values. Except for the float output,
+ * the configured driven and pulled levels match, so if there is a need for
+ * non-LPM pulled output, the same configuration could probably be used.
+ *
+ * Output value  sleep_oe_n  sleep_data  pullup_en  pulldown_en  pull_sel
+ *                 (bit 7)    (bit 8)    (bit 14)     (bit 13)   (bit 15)
+ *
+ * Input            0          X(0)        X(0)        X(0)       0
+ * Drive 0          0          0           0           X(1)       0
+ * Drive 1          0          1           X(1)        0	  0
+ * Pull hi (1)      1          X(1)        1           0	  0
+ * Pull lo (0)      1          X(0)        0           1	  0
+ * Z (float)        1          X(0)        0           0	  0
+ */
+#define MFP_LPM(x)		< (x) MFP_LPM_MSK >
+
+#define MFP_LPM_MSK		0xe1f0
+#define MFP_LPM_INPUT		0x0000
+#define MFP_LPM_DRIVE_LOW	0x2000
+#define MFP_LPM_DRIVE_HIGH	0x4100
+#define MFP_LPM_PULL_LOW	0x2080
+#define MFP_LPM_PULL_HIGH	0x4180
+#define MFP_LPM_FLOAT		0x0080
+
+#define MFP_LPM_EDGE_NONE	0x0000
+#define MFP_LPM_EDGE_RISE	0x0010
+#define MFP_LPM_EDGE_FALL	0x0020
+#define MFP_LPM_EDGE_BOTH	0x0030
+
 / {
 	model = "Marvell PXA3xx familiy SoC";
 	compatible = "marvell,pxa3xx";
@@ -43,6 +133,16 @@
 			marvell,intc-nr-irqs = <56>;
 		};
 
+		pinctrl: pinctrl@40e10000 {
+			compatible = "pinconf-single";
+			reg = <0x40e10000 0xffff>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x7>;
+		};
+
 		gpio: gpio@40e00000 {
 			compatible = "intel,pxa3xx-gpio";
 			reg = <0x40e00000 0x10000>;
@@ -92,7 +192,39 @@
 			compatible = "marvell,pxa-ohci";
 			reg = <0x4c000000 0x10000>;
 			interrupts = <3>;
-			clocks = <&clks CLK_USBHOST>;
+			clocks = <&clks CLK_USBH>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@40b00000 {
+			compatible = "marvell,pxa270-pwm";
+			reg = <0x40b00000 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM0>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@40b00010 {
+			compatible = "marvell,pxa270-pwm";
+			reg = <0x40b00010 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM1>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@40c00000 {
+			compatible = "marvell,pxa270-pwm";
+			reg = <0x40c00000 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM0>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@40c00010 {
+			compatible = "marvell,pxa270-pwm";
+			reg = <0x40c00010 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM1>;
 			status = "disabled";
 		};
 	};
diff --git a/src/arm/qcom-apq8060-dragonboard.dts b/src/arm/qcom-apq8060-dragonboard.dts
new file mode 100644
index 000000000000..4b8872cc8bf9
--- /dev/null
+++ b/src/arm/qcom-apq8060-dragonboard.dts
@@ -0,0 +1,784 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "qcom-msm8660.dtsi"
+
+/ {
+	model = "Qualcomm APQ8060 Dragonboard";
+	compatible = "qcom,apq8060-dragonboard", "qcom,msm8660";
+
+	aliases {
+		serial0 = &gsbi12_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		/* Main power of the board: 3.7V */
+		vph: regulator-fixed {
+			compatible = "regulator-fixed";
+			regulator-min-microvolt = <3700000>;
+			regulator-max-microvolt = <3700000>;
+			regulator-name = "VPH";
+			regulator-type = "voltage";
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		/* GPIO controlled ethernet power regulator */
+		dragon_veth: xc622a331mrg {
+			compatible = "regulator-fixed";
+			regulator-name = "XC6222A331MR-G";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			vin-supply = <&vph>;
+			gpio = <&pm8058_gpio 40 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			pinctrl-names = "default";
+			pinctrl-0 = <&dragon_veth_gpios>;
+			regulator-always-on;
+		};
+
+		/* VDDvario fixed regulator */
+		dragon_vario: nds332p {
+			compatible = "regulator-fixed";
+			regulator-name = "NDS332P";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			vin-supply = <&pm8058_s3>;
+		};
+
+		/* This is a levelshifter for SDCC5 */
+		dragon_vio_txb: txb0104rgyr {
+			compatible = "regulator-fixed";
+			regulator-name = "Dragon SDCC levelshifter";
+			vin-supply = <&pm8058_l14>;
+			regulator-always-on;
+		};
+	};
+
+	soc {
+		pinctrl@800000 {
+			/* eMMMC pins, all 8 data lines connected */
+			dragon_sdcc1_pins: sdcc1 {
+				mux {
+					pins = "gpio159", "gpio160", "gpio161",
+					     "gpio162", "gpio163", "gpio164",
+					     "gpio165", "gpio166", "gpio167",
+					     "gpio168";
+					     function = "sdc1";
+				};
+				clk {
+					pins = "gpio167"; /* SDC5 CLK */
+					drive-strength = <16>;
+					bias-disable;
+				};
+				cmd {
+					pins = "gpio168"; /* SDC5 CMD */
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+				data {
+					/* SDC5 D0 to D7 */
+					pins = "gpio159", "gpio160", "gpio161", "gpio162",
+					     "gpio163", "gpio164", "gpio165", "gpio166";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			/*
+			 * The SDCC3 pins are hardcoded (non-muxable) but need some pin
+			 * configuration.
+			 */
+			dragon_sdcc3_pins: sdcc3 {
+				clk {
+					pins = "sdc3_clk";
+					drive-strength = <8>;
+					bias-disable;
+				};
+				cmd {
+					pins = "sdc3_cmd";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+				data {
+					pins = "sdc3_data";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
+
+			/* Second SD card slot pins */
+			dragon_sdcc5_pins: sdcc5 {
+				mux {
+					pins = "gpio95", "gpio96", "gpio97",
+					    "gpio98", "gpio99", "gpio100";
+					function = "sdc5";
+				};
+				clk {
+					pins = "gpio97"; /* SDC5 CLK */
+					drive-strength = <16>;
+					bias-disable;
+				};
+				cmd {
+					pins = "gpio95"; /* SDC5 CMD */
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+				data {
+					/* SDC5 D0 to D3 */
+					pins = "gpio96", "gpio98", "gpio99", "gpio100";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			dragon_gsbi12_i2c_pins: gsbi12_i2c {
+				mux {
+					pins = "gpio115", "gpio116";
+					function = "gsbi12";
+				};
+				pinconf {
+					pins = "gpio115", "gpio116";
+					drive-strength = <16>;
+					/* These have external pull-up 4.7kOhm to 1.8V */
+					bias-disable;
+				};
+			};
+
+			/* Primary serial port uart 0 pins */
+			dragon_gsbi12_serial_pins: gsbi12_serial {
+				mux {
+					pins = "gpio117", "gpio118";
+					function = "gsbi12";
+				};
+				tx {
+					pins = "gpio117";
+					drive-strength = <8>;
+					bias-disable;
+				};
+				rx {
+					pins = "gpio118";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			dragon_ebi2_pins: ebi2 {
+				/*
+				 * Pins used by EBI2 on the Dragonboard, actually only
+				 * CS2 is used by a real peripheral. CS0 is just
+				 * routed to a test point.
+				 */
+				mux0 {
+					pins =
+					    /* "gpio39", CS1A_N this is not good to mux */
+					    "gpio40", /* CS2A_N */
+					    "gpio134"; /* CS0_N testpoint TP29 */
+					function = "ebi2cs";
+				};
+				mux1 {
+					pins =
+					    /* EBI2_ADDR_7 downto EBI2_ADDR_0 address bus */
+					    "gpio123", "gpio124", "gpio125", "gpio126",
+					    "gpio127", "gpio128", "gpio129", "gpio130",
+					    /* EBI2_DATA_15 downto EBI2_DATA_0 data bus */
+					    "gpio135", "gpio136", "gpio137", "gpio138",
+					    "gpio139", "gpio140", "gpio141", "gpio142",
+					    "gpio143", "gpio144", "gpio145", "gpio146",
+					    "gpio147", "gpio148", "gpio149", "gpio150",
+					    "gpio151", /* EBI2_OE_N */
+					    "gpio153", /* EBI2_ADV */
+					    "gpio157"; /* EBI2_WE_N */
+					function = "ebi2";
+				};
+			};
+		};
+
+		qcom,ssbi@500000 {
+			pmic@0 {
+				keypad@148 {
+					linux,keymap = <
+					MATRIX_KEY(0, 0, KEY_MENU)
+					MATRIX_KEY(0, 2, KEY_1)
+					MATRIX_KEY(0, 3, KEY_4)
+					MATRIX_KEY(0, 4, KEY_7)
+					MATRIX_KEY(1, 0, KEY_UP)
+					MATRIX_KEY(1, 1, KEY_LEFT)
+					MATRIX_KEY(1, 2, KEY_DOWN)
+					MATRIX_KEY(1, 3, KEY_5)
+					MATRIX_KEY(1, 3, KEY_8)
+					MATRIX_KEY(2, 0, KEY_HOME)
+					MATRIX_KEY(2, 1, KEY_REPLY)
+					MATRIX_KEY(2, 2, KEY_2)
+					MATRIX_KEY(2, 3, KEY_6)
+					MATRIX_KEY(3, 0, KEY_VOLUMEUP)
+					MATRIX_KEY(3, 1, KEY_RIGHT)
+					MATRIX_KEY(3, 2, KEY_3)
+					MATRIX_KEY(3, 3, KEY_9)
+					MATRIX_KEY(3, 4, KEY_SWITCHVIDEOMODE)
+					MATRIX_KEY(4, 0, KEY_VOLUMEDOWN)
+					MATRIX_KEY(4, 1, KEY_BACK)
+					MATRIX_KEY(4, 2, KEY_CAMERA)
+					MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE)
+					>;
+					keypad,num-rows = <6>;
+					keypad,num-columns = <5>;
+				};
+
+				gpio@150 {
+					dragon_ethernet_gpios: ethernet-gpios {
+						pinconf {
+							pins = "gpio7";
+							function = "normal";
+							input-enable;
+							bias-disable;
+							power-source = <PM8058_GPIO_S3>;
+						};
+					};
+					dragon_bmp085_gpios: bmp085-gpios {
+						pinconf {
+							pins = "gpio16";
+							function = "normal";
+							input-enable;
+							bias-disable;
+							power-source = <PM8058_GPIO_S3>;
+						};
+					};
+					dragon_sdcc3_gpios: sdcc3-gpios {
+						pinconf {
+							pins = "gpio22";
+							function = "normal";
+							input-enable;
+							bias-disable;
+							power-source = <PM8058_GPIO_S3>;
+						};
+					};
+					dragon_sdcc5_gpios: sdcc5-gpios {
+						pinconf {
+							pins = "gpio26";
+							function = "normal";
+							input-enable;
+							bias-pull-up;
+							qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>;
+							power-source = <PM8058_GPIO_S3>;
+						};
+					};
+					dragon_ak8975_gpios: ak8975-gpios {
+						pinconf {
+							pins = "gpio33";
+							function = "normal";
+							input-enable;
+							bias-disable;
+							power-source = <PM8058_GPIO_S3>;
+						};
+					};
+					dragon_veth_gpios: veth-gpios {
+						pinconf {
+							pins = "gpio40";
+							function = "normal";
+							bias-disable;
+							drive-push-pull;
+						};
+					};
+				};
+
+				led@48 {
+					/*
+					 * The keypad LED @0x48 is routed to
+					 * the sensor board where it is
+					 * connected to an infrared LED
+					 * SFH4650 (60mW, @850nm) next to the
+					 * ambient light and proximity sensor
+					 * Capella Microsystems CM3605.
+					 */
+					compatible = "qcom,pm8058-keypad-led";
+					reg = <0x48>;
+					label = "pm8058:infrared:proximitysensor";
+					default-state = "off";
+				};
+				led@131 {
+					compatible = "qcom,pm8058-led";
+					reg = <0x131>;
+					label = "pm8058:red";
+					default-state = "off";
+				};
+				led@132 {
+					/*
+					 * This is actually green too on my
+					 * board, but documented as yellow.
+					 */
+					compatible = "qcom,pm8058-led";
+					reg = <0x132>;
+					label = "pm8058:yellow";
+					default-state = "off";
+					linux,default-trigger = "mmc0";
+				};
+				led@133 {
+					compatible = "qcom,pm8058-led";
+					reg = <0x133>;
+					label = "pm8058:green";
+					default-state = "on";
+					linux,default-trigger = "heartbeat";
+				};
+			};
+		};
+
+		gsbi@19c00000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+
+			serial@19c40000 {
+				status = "ok";
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_gsbi12_serial_pins>;
+			};
+
+			i2c@19c80000 {
+				status = "ok";
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_gsbi12_i2c_pins>;
+
+				ak8975@0c {
+					compatible = "asahi-kasei,ak8975";
+					reg = <0x0c>;
+					/* GPIO33 has interrupt 224 on the PM8058 */
+					interrupt-parent = <&pm8058_gpio>;
+					interrupts = <224 IRQ_TYPE_EDGE_RISING>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&dragon_ak8975_gpios>;
+					vid-supply = <&pm8058_lvs0>; // 1.8V
+					vdd-supply = <&pm8058_l14>; // 2.85V
+				};
+				bmp085@77 {
+					compatible = "bosch,bmp085";
+					reg = <0x77>;
+					/* GPIO16 has interrupt 207 on the PM8058 */
+					interrupt-parent = <&pm8058_gpio>;
+					interrupts = <207 IRQ_TYPE_EDGE_RISING>;
+					reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&dragon_bmp085_gpios>;
+					vddd-supply = <&pm8058_lvs0>; // 1.8V
+					vdda-supply = <&pm8058_l14>; // 2.85V
+				};
+			};
+		};
+
+		external-bus@1a100000 {
+			/* The EBI2 will instantiate first, then populate its children */
+			status = "ok";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dragon_ebi2_pins>;
+
+			/*
+			 * An on-board SMSC LAN9221 chip for "debug ethernet",
+			 * which is actually just an ordinary ethernet on the
+			 * EBI2. This has a 25MHz chrystal next to it, so no
+			 * clocking is needed.
+			 */
+			ethernet-ebi2@2,0 {
+				compatible = "smsc,lan9221", "smsc,lan9115";
+				reg = <2 0x0 0x100>;
+				/*
+				 * GPIO7 has interrupt 198 on the PM8058
+				 * The second interrupt is the PME interrupt
+				 * for network wakeup, connected to the TLMM.
+				 */
+				interrupts-extended = <&pmicintc 198 IRQ_TYPE_EDGE_FALLING>,
+						    <&tlmm 29 IRQ_TYPE_EDGE_RISING>;
+				reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
+				vdd33a-supply = <&dragon_veth>;
+				vddvario-supply = <&dragon_vario>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_ethernet_gpios>;
+				phy-mode = "mii";
+				reg-io-width = <2>;
+				smsc,force-external-phy;
+				/* IRQ on edge falling = active low */
+				smsc,irq-active-low;
+				smsc,irq-push-pull;
+
+				/*
+				 * SLOW chipselect config
+				 * Delay 9 cycles (140ns@64MHz) between SMSC
+				 * LAN9221 Ethernet controller reads and writes
+				 * on CS2.
+				 */
+				qcom,xmem-recovery-cycles = <0>;
+				qcom,xmem-write-hold-cycles = <3>;
+				qcom,xmem-write-delta-cycles = <31>;
+				qcom,xmem-read-delta-cycles = <28>;
+				qcom,xmem-write-wait-cycles = <9>;
+				qcom,xmem-read-wait-cycles = <9>;
+			};
+		};
+
+		rpm@104000 {
+			/*
+			 * Set up of the PMIC RPM regulators for this board
+			 * PM8901 supplies "preliminary regulators" whatever
+			 * that means
+			 */
+			pm8901-regulators {
+				vdd_l0-supply = <&pm8901_s4>;
+				vdd_l1-supply = <&vph>;
+				vdd_l2-supply = <&vph>;
+				vdd_l3-supply = <&vph>;
+				vdd_l4-supply = <&vph>;
+				vdd_l5-supply = <&vph>;
+				vdd_l6-supply = <&vph>;
+				/* vdd_s0-supply, vdd_s1-supply: SAW regulators */
+				vdd_s2-supply = <&vph>;
+				vdd_s3-supply = <&vph>;
+				vdd_s4-supply = <&vph>;
+				lvs0_in-supply = <&pm8058_s3>;
+				lvs1_in-supply = <&pm8901_s4>;
+				lvs2_in-supply = <&pm8058_l0>;
+				lvs3_in-supply = <&pm8058_s2>;
+				mvs_in-supply = <&pm8058_s3>;
+
+				l0 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+				l1 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					bias-pull-down;
+				};
+				l2 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <3300000>;
+					bias-pull-down;
+				};
+				l3 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					bias-pull-down;
+				};
+				l4 {
+					regulator-min-microvolt = <2600000>;
+					regulator-max-microvolt = <2600000>;
+					bias-pull-down;
+				};
+				l5 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+				l6 {
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+					bias-pull-down;
+				};
+
+				/* s0 and s1 are SAW regulators controlled over SPM */
+				s2 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+				s3 {
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+				s4 {
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				/* LVS0 thru 3 and mvs0 are just switches */
+				lvs0 {
+					regulator-always-on;
+				};
+				lvs1 { };
+				lvs2 { };
+				lvs3 { };
+				mvs0 {};
+
+			};
+
+			pm8058-regulators {
+				vdd_l0_l1_lvs-supply = <&pm8058_s3>;
+				vdd_l2_l11_l12-supply = <&vph>;
+				vdd_l3_l4_l5-supply = <&vph>;
+				vdd_l6_l7-supply = <&vph>;
+				vdd_l8-supply = <&vph>;
+				vdd_l9-supply = <&vph>;
+				vdd_l10-supply = <&vph>;
+				vdd_l13_l16-supply = <&pm8058_s4>;
+				vdd_l14_l15-supply = <&vph>;
+				vdd_l17_l18-supply = <&vph>;
+				vdd_l19_l20-supply = <&vph>;
+				vdd_l21-supply = <&pm8058_s3>;
+				vdd_l22-supply = <&pm8058_s3>;
+				vdd_l23_l24_l25-supply = <&pm8058_s3>;
+				vdd_s0-supply = <&vph>;
+				vdd_s1-supply = <&vph>;
+				vdd_s2-supply = <&vph>;
+				vdd_s3-supply = <&vph>;
+				vdd_s4-supply = <&vph>;
+				vdd_ncp-supply = <&vph>;
+
+				l0 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+				l1 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+				l2 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2600000>;
+					bias-pull-down;
+				};
+				l3 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+				l4 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+				l5 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+				l6 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3600000>;
+					bias-pull-down;
+				};
+				l7 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+				l8 {
+					regulator-min-microvolt = <2900000>;
+					regulator-max-microvolt = <3050000>;
+					bias-pull-down;
+				};
+				l9 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+				l10 {
+					regulator-min-microvolt = <2600000>;
+					regulator-max-microvolt = <2600000>;
+					bias-pull-down;
+				};
+				l11 {
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					bias-pull-down;
+				};
+				l12 {
+					regulator-min-microvolt = <2900000>;
+					regulator-max-microvolt = <2900000>;
+					bias-pull-down;
+				};
+				l13 {
+					regulator-min-microvolt = <2050000>;
+					regulator-max-microvolt = <2050000>;
+					bias-pull-down;
+				};
+				l14 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+				l15 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+				l16 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+					regulator-always-on;
+				};
+				l17 {
+					// 1.5V according to schematic
+					regulator-min-microvolt = <2600000>;
+					regulator-max-microvolt = <2600000>;
+					bias-pull-down;
+				};
+				l18 {
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+					bias-pull-down;
+				};
+				l19 {
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
+					bias-pull-down;
+				};
+				l20 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+				l21 {
+					// 1.1 V according to schematic
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+					regulator-always-on;
+				};
+				l22 {
+					// 1.2 V according to schematic
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					bias-pull-down;
+				};
+				l23 {
+					// Unused
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+				l24 {
+					// Unused
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+				l25 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				s0 {
+					// regulator-min-microvolt = <500000>;
+					// regulator-max-microvolt = <1325000>;
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+				s1 {
+					// regulator-min-microvolt = <500000>;
+					// regulator-max-microvolt = <1250000>;
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+				s2 {
+					// 1.3 V according to schematic
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1400000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+				s3 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+					regulator-always-on;
+					bias-pull-down;
+				};
+				s4 {
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+					qcom,switch-mode-frequency = <1600000>;
+					regulator-always-on;
+					bias-pull-down;
+				};
+
+				/* LVS0 and LVS1 are just switches */
+				lvs0 {
+					bias-pull-down;
+				};
+				lvs1 {
+					bias-pull-down;
+				};
+
+				ncp {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+				};
+			};
+		};
+		amba {
+			/* Internal 3.69 GiB eMMC */
+			sdcc@12400000 {
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_sdcc1_pins>;
+				vmmc-supply = <&pm8901_l5>;
+				vqmmc-supply = <&pm8901_lvs0>;
+			};
+
+			/* External micro SD card, directly connected, pulled up to 2.85 V */
+			sdcc@12180000 {
+				status = "okay";
+				/* Enable SSBI GPIO 22 as input, use for card detect */
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_sdcc3_pins>, <&dragon_sdcc3_gpios>;
+				cd-gpios = <&pm8058_gpio 22 GPIO_ACTIVE_LOW>;
+				wp-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+				vmmc-supply = <&pm8058_l14>;
+			};
+
+			/*
+			 * Second external micro SD card, using two TXB104RGYR levelshifters
+			 * to lift from 1.8 V to 2.85 V
+			 */
+			sdcc@12200000 {
+				status = "okay";
+				/* Enable SSBI GPIO 26 as input, use for card detect */
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_sdcc5_pins>, <&dragon_sdcc5_gpios>;
+				cd-gpios = <&pm8058_gpio 26 GPIO_ACTIVE_LOW>;
+				wp-gpios = <&tlmm 106 GPIO_ACTIVE_HIGH>;
+				vmmc-supply = <&pm8058_l14>;
+				vqmmc-supply = <&dragon_vio_txb>;
+			};
+		};
+	};
+};
diff --git a/src/arm/qcom-apq8064-arrow-sd-600eval-pins.dtsi b/src/arm/qcom-apq8064-arrow-sd-600eval-pins.dtsi
new file mode 100644
index 000000000000..a3efb9704fcd
--- /dev/null
+++ b/src/arm/qcom-apq8064-arrow-sd-600eval-pins.dtsi
@@ -0,0 +1,52 @@
+&tlmm_pinmux {
+	card_detect: card-detect {
+		mux {
+			pins = "gpio26";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	pcie_pins: pcie-pinmux {
+		mux {
+			pins = "gpio27";
+			function = "gpio";
+		};
+		conf {
+			pins = "gpio27";
+			drive-strength = <12>;
+			bias-disable;
+		};
+	};
+
+	user_leds: user-leds {
+		mux {
+			pins = "gpio3", "gpio7", "gpio10", "gpio11";
+			function = "gpio";
+		};
+
+		conf {
+			pins = "gpio3", "gpio7", "gpio10", "gpio11";
+			function = "gpio";
+			output-low;
+		};
+	};
+
+	magneto_pins: magneto-pins {
+		mux {
+			pins = "gpio31", "gpio48";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+};
+
+&pm8921_mpps {
+	mpp_leds: mpp-leds {
+		pinconf {
+			pins = "mpp7", "mpp8";
+			function = "digital";
+			output-low;
+		};
+	};
+};
diff --git a/src/arm/qcom-apq8064-arrow-sd-600eval.dts b/src/arm/qcom-apq8064-arrow-sd-600eval.dts
new file mode 100644
index 000000000000..39ae2bc8cb08
--- /dev/null
+++ b/src/arm/qcom-apq8064-arrow-sd-600eval.dts
@@ -0,0 +1,351 @@
+#include "qcom-apq8064-v2.0.dtsi"
+#include "qcom-apq8064-arrow-sd-600eval-pins.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+
+/ {
+	model = "Arrow Electronics, APQ8064 SD_600eval";
+	compatible = "arrow,sd_600eval", "qcom,apq8064";
+
+	aliases {
+		serial0 = &gsbi7_serial;
+		serial1 = &gsbi1_serial;
+		i2c0 = &gsbi2_i2c;
+		i2c1 = &gsbi3_i2c;
+		i2c2 = &gsbi4_i2c;
+		i2c3 = &gsbi7_i2c;
+		spi0 = &gsbi5_spi;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		vph: regulator-fixed@1 {
+			compatible = "regulator-fixed";
+			regulator-min-microvolt = <4500000>;
+			regulator-max-microvolt = <4500000>;
+			regulator-name = "VPH";
+			regulator-type = "voltage";
+			regulator-boot-on;
+		};
+
+		/* on board fixed 3.3v supply */
+		vcc3v3: vcc3v3 {
+			compatible = "regulator-fixed";
+			regulator-name = "VCC3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+	};
+
+	soc {
+		rpm@108000 {
+			regulators {
+				vdd_s1-supply = <&vph>;
+				vdd_s2-supply = <&vph>;
+				vdd_s3-supply = <&vph>;
+				vdd_s4-supply = <&vph>;
+				vdd_s5-supply = <&vph>;
+				vdd_s6-supply = <&vph>;
+				vdd_s7-supply = <&vph>;
+				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+				vdd_l3_l15_l17-supply = <&vph>;
+				vdd_l4_l14-supply = <&vph>;
+				vdd_l5_l8_l16-supply = <&vph>;
+				vdd_l6_l7-supply = <&vph>;
+				vdd_l9_l11-supply = <&vph>;
+				vdd_l10_l22-supply = <&vph>;
+				vdd_l21_l23_l29-supply = <&vph>;
+				vdd_l24-supply = <&pm8921_s1>;
+				vdd_l25-supply = <&pm8921_s1>;
+				vdd_l26-supply = <&pm8921_s7>;
+				vdd_l27-supply = <&pm8921_s7>;
+				vdd_l28-supply = <&pm8921_s7>;
+				vin_lvs1_3_6-supply = <&pm8921_s4>;
+				vin_lvs2-supply = <&pm8921_s1>;
+				vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+				s1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+					qcom,switch-mode-frequency = <3200000>;
+					bias-pull-down;
+				};
+
+				s3 {
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1400000>;
+					qcom,switch-mode-frequency = <4800000>;
+				};
+
+				s4 {
+					regulator-min-microvolt	= <1800000>;
+					regulator-max-microvolt	= <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+					qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+					bias-pull-down;
+					regulator-always-on;
+				};
+
+				s7 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <3200000>;
+				 };
+
+				l3 {
+					regulator-min-microvolt = <3050000>;
+					regulator-max-microvolt = <3300000>;
+					bias-pull-down;
+				};
+
+				l4 {
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				l5 {
+					regulator-min-microvolt = <2750000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				l6 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				l23 {
+					regulator-min-microvolt = <1700000>;
+					regulator-max-microvolt = <1900000>;
+					bias-pull-down;
+				};
+
+				lvs6 {
+					bias-pull-down;
+				};
+
+				lvs7 {
+					bias-pull-down;
+				};
+			};
+		};
+
+		gsbi@12440000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_UART_W_FC>;
+			serial@12450000 {
+				label = "LS-UART1";
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&gsbi1_uart_4pins>;
+			};
+		};
+
+		gsbi@12480000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+			i2c@124a0000 {
+				/* On Low speed expansion and Sensors */
+				label = "LS-I2C0";
+				status = "okay";
+				lis3mdl_mag@1e {
+					compatible = "st,lis3mdl-magn";
+					reg = <0x1e>;
+					vdd-supply = <&vcc3v3>;
+					vddio-supply = <&pm8921_s4>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&magneto_pins>;
+					interrupt-parent = <&tlmm_pinmux>;
+
+					st,drdy-int-pin = <2>;
+					interrupts = <48 IRQ_TYPE_EDGE_RISING>, /* DRDY line */
+						     <31 IRQ_TYPE_EDGE_RISING>; /* INT */
+				};
+			};
+		};
+
+		gsbi@16200000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+			i2c@16280000 {
+			/* On Low speed expansion */
+				status = "okay";
+				label = "LS-I2C1";
+				clock-frequency = <200000>;
+				eeprom@52 {
+					compatible = "atmel,24c128";
+					reg = <0x52>;
+					pagesize = <64>;
+				};
+			};
+		};
+
+		gsbi@16300000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+			i2c@16380000 {
+				/* On High speed expansion */
+				label = "HS-CAM-I2C3";
+				status = "okay";
+			};
+		};
+
+		gsbi@1a200000 {
+			status = "okay";
+			spi@1a280000 {
+				/* On Low speed expansion */
+				label = "LS-SPI0";
+				status = "okay";
+			};
+		};
+
+		/* DEBUG UART  */
+		gsbi@16600000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			serial@16640000 {
+				label = "LS-UART0";
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&gsbi7_uart_2pins>;
+			};
+
+			i2c@16680000 {
+				/* On High speed expansion */
+				status = "okay";
+				label = "HS-CAM-I2C2";
+			};
+		};
+
+		leds {
+			pinctrl-names = "default";
+			pinctrl-0 = <&user_leds>, <&mpp_leds>;
+
+			compatible = "gpio-leds";
+
+			user-led0 {
+				label = "user0-led";
+				gpios = <&tlmm_pinmux 3 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "heartbeat";
+				default-state = "off";
+			};
+
+			user-led1 {
+				label = "user1-led";
+				gpios = <&tlmm_pinmux 7 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+
+			user-led2 {
+				label = "user2-led";
+				gpios = <&tlmm_pinmux 10 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "mmc1";
+				default-state = "off";
+			};
+
+			user-led3 {
+				label = "user3-led";
+				gpios = <&tlmm_pinmux 11 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "none";
+				default-state = "off";
+			};
+
+			wifi-led {
+				label = "WiFi-led";
+				gpios = <&pm8921_mpps 7 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+
+			bt-led {
+				label = "BT-led";
+				gpios = <&pm8921_mpps 8 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+		};
+
+		pci@1b500000 {
+			status = "okay";
+			vdda-supply = <&pm8921_s3>;
+			vdda_phy-supply = <&pm8921_lvs6>;
+			vdda_refclk-supply = <&vcc3v3>;
+			pinctrl-0 = <&pcie_pins>;
+			pinctrl-names = "default";
+			perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+		};
+
+		phy@1b400000 {
+			status = "okay";
+		};
+
+		sata@29000000 {
+			status	= "okay";
+			target-supply	= <&pm8921_lvs7>;
+		};
+
+		/* OTG */
+		phy@12500000 {
+			status		= "okay";
+			dr_mode		= "peripheral";
+			vddcx-supply	= <&pm8921_s3>;
+			v3p3-supply	= <&pm8921_l3>;
+			v1p8-supply	= <&pm8921_l4>;
+		};
+
+		phy@12520000 {
+			status		= "okay";
+			vddcx-supply	= <&pm8921_s3>;
+			v3p3-supply	= <&pm8921_l3>;
+			v1p8-supply	= <&pm8921_l23>;
+		};
+
+		phy@12530000 {
+			status		= "okay";
+			vddcx-supply	= <&pm8921_s3>;
+			v3p3-supply	= <&pm8921_l3>;
+			v1p8-supply	= <&pm8921_l23>;
+		};
+
+		gadget@12500000 {
+			status = "okay";
+		};
+
+		/* OTG */
+		usb@12500000 {
+			status = "okay";
+		};
+
+		usb@12520000 {
+			status = "okay";
+		};
+
+		usb@12530000 {
+			status = "okay";
+		};
+
+		amba {
+			/* eMMC */
+			sdcc@12400000 {
+				status = "okay";
+				vmmc-supply = <&pm8921_l5>;
+				vqmmc-supply = <&pm8921_s4>;
+			};
+
+			/* External micro SD card */
+			sdcc@12180000 {
+				status = "okay";
+				vmmc-supply = <&pm8921_l6>;
+				pinctrl-names	= "default";
+				pinctrl-0	= <&card_detect>;
+				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};
diff --git a/src/arm/qcom-apq8064-asus-nexus7-flo.dts b/src/arm/qcom-apq8064-asus-nexus7-flo.dts
index 32fedfa149d0..e39440a86739 100644
--- a/src/arm/qcom-apq8064-asus-nexus7-flo.dts
+++ b/src/arm/qcom-apq8064-asus-nexus7-flo.dts
@@ -15,6 +15,20 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@88d00000{
+			compatible = "ramoops";
+			reg = <0x88d00000 0x100000>;
+			record-size     = <0x00020000>;
+			console-size    = <0x00020000>;
+			ftrace-size     = <0x00020000>;
+		};
+	};
+
 	ext_3p3v: regulator-fixed@1 {
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <3300000>;
@@ -29,12 +43,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		power {
-			label = "Power";
-			gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
 		volume_up {
 			label = "Volume Up";
 			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
@@ -105,6 +113,7 @@
 				l2 {
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
 				};
 
 				/* msm_otg-HSUSB_3p3 */
@@ -139,13 +148,14 @@
 					regulator-min-microvolt = <3000000>;
 					regulator-max-microvolt = <3000000>;
 					bias-pull-down;
+					regulator-always-on;
 				};
 
 				/* pwm_power for backlight */
 				l17 {
 					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3600000>;
-					bias-pull-down;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
 				};
 
 				/* camera, qdsp6 */
@@ -190,6 +200,63 @@
 			};
 		};
 
+		mdp@5100000 {
+			status = "okay";
+			ports {
+				port@1 {
+					mdp_dsi1_out: endpoint {
+						remote-endpoint = <&dsi0_in>;
+					};
+				};
+			};
+		};
+
+		dsi0: mdss_dsi@4700000 {
+			status = "okay";
+			vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/
+			vdd-supply = <&pm8921_l8>;
+			vddio-supply = <&pm8921_lvs7>;
+			avdd-supply = <&pm8921_l11>;
+			vcss-supply = <&ext_3p3v>;
+
+			panel@0 {
+				reg = <0>;
+				compatible = "jdi,lt070me05000";
+
+				vddp-supply = <&pm8921_l17>;
+				iovcc-supply = <&pm8921_lvs7>;
+
+				enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+				reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
+				dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&dsi0_out>;
+					};
+				};
+			};
+			ports {
+				port@0 {
+					dsi0_in: endpoint {
+						remote-endpoint = <&mdp_dsi1_out>;
+					};
+				};
+
+				port@1 {
+					dsi0_out: endpoint {
+						remote-endpoint = <&panel_in>;
+						data-lanes = <0 1 2 3>;
+					};
+				};
+			};
+		};
+
+		dsi-phy@4700200 {
+			status = "okay";
+			vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/
+		};
+
 		gsbi@16200000 {
 			status = "okay";
 			qcom,mode = <GSBI_PROT_I2C>;
@@ -259,6 +326,7 @@
 			vddcx-supply	= <&pm8921_s3>;
 			v3p3-supply	= <&pm8921_l3>;
 			v1p8-supply	= <&pm8921_l4>;
+			dr_mode		= "otg";
 		};
 
 		gadget@12500000 {
@@ -278,5 +346,19 @@
 				vqmmc-supply = <&pm8921_s4>;
 			};
 		};
+
+		imem@2a03f000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x2a03f000 0x1000>;
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x65c>;
+
+				mode-normal	= <0x77665501>;
+				mode-bootloader	= <0x77665500>;
+				mode-recovery	= <0x77665502>;
+			};
+		};
 	};
 };
diff --git a/src/arm/qcom-apq8064-ifc6410.dts b/src/arm/qcom-apq8064-ifc6410.dts
index 2eeb0904eaa7..3d37cab3b9a9 100644
--- a/src/arm/qcom-apq8064-ifc6410.dts
+++ b/src/arm/qcom-apq8064-ifc6410.dts
@@ -43,6 +43,17 @@
 		};
 	};
 
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+	};
+
 	soc {
 		pinctrl@800000 {
 			card_detect: card_detect {
@@ -64,6 +75,25 @@
 					bias-disable;
 				};
 			};
+
+			hdmi_pinctrl: hdmi-pinctrl {
+				mux {
+					pins = "gpio70", "gpio71", "gpio72";
+					function = "hdmi";
+				};
+
+				pinconf_ddc {
+					pins = "gpio70", "gpio71";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				pinconf_hpd {
+					pins = "gpio72";
+					bias-pull-down;
+					drive-strength = <16>;
+				};
+			};
 		};
 
 		rpm@108000 {
@@ -329,5 +359,49 @@
 				mmc-pwrseq = <&sdcc4_pwrseq>;
 			};
 		};
+
+		hdmi-tx@4a00000 {
+			status = "okay";
+
+			core-vdda-supply = <&pm8921_hdmi_switch>;
+			hdmi-mux-supply = <&ext_3p3v>;
+
+			hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_pinctrl>;
+
+			ports {
+				port@0 {
+					endpoint {
+						remote-endpoint = <&mdp_dtv_out>;
+					};
+				};
+
+				port@1 {
+					endpoint {
+						remote-endpoint = <&hdmi_con>;
+					};
+				};
+			};
+		};
+
+		hdmi-phy@4a00400 {
+			status = "okay";
+
+			core-vdda-supply = <&pm8921_hdmi_switch>;
+		};
+
+		mdp@5100000 {
+			status = "okay";
+
+			ports {
+				port@3 {
+					endpoint {
+						remote-endpoint = <&hdmi_in>;
+					};
+				};
+			};
+		};
 	};
 };
diff --git a/src/arm/qcom-apq8064-pins.dtsi b/src/arm/qcom-apq8064-pins.dtsi
index 4102a98f475b..6b801e7e57a2 100644
--- a/src/arm/qcom-apq8064-pins.dtsi
+++ b/src/arm/qcom-apq8064-pins.dtsi
@@ -7,6 +7,46 @@
 		};
 	};
 
+	sdcc1_pins: sdcc1-pin-active {
+		clk {
+			pins = "sdc1_clk";
+			drive-strengh = <16>;
+			bias-disable;
+		};
+
+		cmd {
+			pins = "sdc1_cmd";
+			drive-strengh = <10>;
+			bias-pull-up;
+		};
+
+		data {
+			pins = "sdc1_data";
+			drive-strengh = <10>;
+			bias-pull-up;
+		};
+	};
+
+	sdcc3_pins: sdcc3-pin-active {
+		clk {
+			pins = "sdc3_clk";
+			drive-strengh = <8>;
+			bias-disable;
+		};
+
+		cmd {
+			pins = "sdc3_cmd";
+			drive-strengh = <8>;
+			bias-pull-up;
+		};
+
+		data {
+			pins = "sdc3_data";
+			drive-strengh = <8>;
+			bias-pull-up;
+		};
+	};
+
 	ps_hold: ps_hold {
 		mux {
 			pins = "gpio78";
diff --git a/src/arm/qcom-apq8064-sony-xperia-yuga.dts b/src/arm/qcom-apq8064-sony-xperia-yuga.dts
index 06b3c76c3e41..ebd675ca94b4 100644
--- a/src/arm/qcom-apq8064-sony-xperia-yuga.dts
+++ b/src/arm/qcom-apq8064-sony-xperia-yuga.dts
@@ -70,45 +70,6 @@
 				};
 			};
 
-			sdcc1_pin_a: sdcc1-pin-active {
-				clk {
-					pins = "sdc1_clk";
-					drive-strengh = <16>;
-					bias-disable;
-				};
-
-				cmd {
-					pins = "sdc1_cmd";
-					drive-strengh = <10>;
-					bias-pull-up;
-				};
-
-				data {
-					pins = "sdc1_data";
-					drive-strengh = <10>;
-					bias-pull-up;
-				};
-			};
-
-			sdcc3_pin_a: sdcc3-pin-active {
-				clk {
-					pins = "sdc3_clk";
-					drive-strengh = <8>;
-					bias-disable;
-				};
-
-				cmd {
-					pins = "sdc3_cmd";
-					drive-strengh = <8>;
-					bias-pull-up;
-				};
-
-				data {
-					pins = "sdc3_data";
-					drive-strengh = <8>;
-					bias-pull-up;
-				};
-			};
 
 			sdcc3_cd_pin_a: sdcc3-cd-pin-active {
 				pins = "gpio26";
@@ -417,9 +378,6 @@
 
 				vmmc-supply = <&pm8921_l5>;
 				vqmmc-supply = <&pm8921_s4>;
-
-				pinctrl-names = "default";
-				pinctrl-0 = <&sdcc1_pin_a>;
 			};
 
 			sdcc3: sdcc@12180000 {
@@ -429,7 +387,7 @@
 				cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
 
 				pinctrl-names = "default";
-				pinctrl-0 = <&sdcc3_pin_a>, <&sdcc3_cd_pin_a>;
+				pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
 			};
 		};
 	};
diff --git a/src/arm/qcom-apq8064.dtsi b/src/arm/qcom-apq8064.dtsi
index df96ccdc9bb4..407a4610f4a7 100644
--- a/src/arm/qcom-apq8064.dtsi
+++ b/src/arm/qcom-apq8064.dtsi
@@ -4,7 +4,9 @@
 #include <dt-bindings/clock/qcom,gcc-msm8960.h>
 #include <dt-bindings/reset/qcom,gcc-msm8960.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 / {
 	model = "Qualcomm APQ8064";
@@ -86,6 +88,92 @@
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 7>;
+			coefficients = <1199 0>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 8>;
+			coefficients = <1132 0>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 9>;
+			coefficients = <1199 0>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 10>;
+			coefficients = <1132 0>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
 		interrupts = <1 10 0x304>;
@@ -177,7 +265,7 @@
 
 		apps_smsm: apps@0 {
 			reg = <0>;
-			#qcom,state-cells = <1>;
+			#qcom,smem-state-cells = <1>;
 		};
 
 		modem_smsm: modem@1 {
@@ -213,6 +301,15 @@
 		};
 	};
 
+	firmware {
+		scm {
+			compatible = "qcom,scm-apq8064";
+
+			clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
+			clock-names = "core";
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -247,7 +344,8 @@
 		};
 
 		timer@200a000 {
-			compatible = "qcom,kpss-timer", "qcom,msm-timer";
+			compatible = "qcom,kpss-timer",
+				     "qcom,kpss-wdt-apq8064", "qcom,msm-timer";
 			interrupts = <1 1 0x301>,
 				     <1 2 0x301>,
 				     <1 3 0x301>;
@@ -552,22 +650,50 @@
 					compatible = "qcom,pm8921-gpio",
 						     "qcom,ssbi-gpio";
 					reg = <0x150>;
-					interrupts = <192 1>, <193 1>, <194 1>,
-						     <195 1>, <196 1>, <197 1>,
-						     <198 1>, <199 1>, <200 1>,
-						     <201 1>, <202 1>, <203 1>,
-						     <204 1>, <205 1>, <206 1>,
-						     <207 1>, <208 1>, <209 1>,
-						     <210 1>, <211 1>, <212 1>,
-						     <213 1>, <214 1>, <215 1>,
-						     <216 1>, <217 1>, <218 1>,
-						     <219 1>, <220 1>, <221 1>,
-						     <222 1>, <223 1>, <224 1>,
-						     <225 1>, <226 1>, <227 1>,
-						     <228 1>, <229 1>, <230 1>,
-						     <231 1>, <232 1>, <233 1>,
-						     <234 1>, <235 1>;
-
+					interrupts = <192 IRQ_TYPE_NONE>,
+						     <193 IRQ_TYPE_NONE>,
+						     <194 IRQ_TYPE_NONE>,
+						     <195 IRQ_TYPE_NONE>,
+						     <196 IRQ_TYPE_NONE>,
+						     <197 IRQ_TYPE_NONE>,
+						     <198 IRQ_TYPE_NONE>,
+						     <199 IRQ_TYPE_NONE>,
+						     <200 IRQ_TYPE_NONE>,
+						     <201 IRQ_TYPE_NONE>,
+						     <202 IRQ_TYPE_NONE>,
+						     <203 IRQ_TYPE_NONE>,
+						     <204 IRQ_TYPE_NONE>,
+						     <205 IRQ_TYPE_NONE>,
+						     <206 IRQ_TYPE_NONE>,
+						     <207 IRQ_TYPE_NONE>,
+						     <208 IRQ_TYPE_NONE>,
+						     <209 IRQ_TYPE_NONE>,
+						     <210 IRQ_TYPE_NONE>,
+						     <211 IRQ_TYPE_NONE>,
+						     <212 IRQ_TYPE_NONE>,
+						     <213 IRQ_TYPE_NONE>,
+						     <214 IRQ_TYPE_NONE>,
+						     <215 IRQ_TYPE_NONE>,
+						     <216 IRQ_TYPE_NONE>,
+						     <217 IRQ_TYPE_NONE>,
+						     <218 IRQ_TYPE_NONE>,
+						     <219 IRQ_TYPE_NONE>,
+						     <220 IRQ_TYPE_NONE>,
+						     <221 IRQ_TYPE_NONE>,
+						     <222 IRQ_TYPE_NONE>,
+						     <223 IRQ_TYPE_NONE>,
+						     <224 IRQ_TYPE_NONE>,
+						     <225 IRQ_TYPE_NONE>,
+						     <226 IRQ_TYPE_NONE>,
+						     <227 IRQ_TYPE_NONE>,
+						     <228 IRQ_TYPE_NONE>,
+						     <229 IRQ_TYPE_NONE>,
+						     <230 IRQ_TYPE_NONE>,
+						     <231 IRQ_TYPE_NONE>,
+						     <232 IRQ_TYPE_NONE>,
+						     <233 IRQ_TYPE_NONE>,
+						     <234 IRQ_TYPE_NONE>,
+						     <235 IRQ_TYPE_NONE>;
 					gpio-controller;
 					#gpio-cells = <2>;
 
@@ -580,9 +706,18 @@
 					gpio-controller;
 					#gpio-cells = <2>;
 					interrupts =
-					<128 1>, <129 1>, <130 1>, <131 1>,
-					<132 1>, <133 1>, <134 1>, <135 1>,
-					<136 1>, <137 1>, <138 1>, <139 1>;
+					<128 IRQ_TYPE_NONE>,
+					<129 IRQ_TYPE_NONE>,
+					<130 IRQ_TYPE_NONE>,
+					<131 IRQ_TYPE_NONE>,
+					<132 IRQ_TYPE_NONE>,
+					<133 IRQ_TYPE_NONE>,
+					<134 IRQ_TYPE_NONE>,
+					<135 IRQ_TYPE_NONE>,
+					<136 IRQ_TYPE_NONE>,
+					<137 IRQ_TYPE_NONE>,
+					<138 IRQ_TYPE_NONE>,
+					<139 IRQ_TYPE_NONE>;
 				};
 
 				rtc@11d {
@@ -604,11 +739,28 @@
 			};
 		};
 
+		qfprom: qfprom@700000 {
+			compatible	= "qcom,qfprom";
+			reg		= <0x00700000 0x1000>;
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			ranges;
+			tsens_calib: calib {
+				reg = <0x404 0x10>;
+			};
+			tsens_backup: backup_calib {
+				reg = <0x414 0x10>;
+			};
+		};
+
 		gcc: clock-controller@900000 {
 			compatible = "qcom,gcc-apq8064";
 			reg = <0x00900000 0x4000>;
+			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+			nvmem-cell-names = "calib", "calib_backup";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+			#thermal-sensor-cells = <1>;
 		};
 
 		lcc: clock-controller@28000000 {
@@ -705,7 +857,6 @@
 			reg		= <0x12500000 0x400>;
 			interrupts	= <GIC_SPI 100 IRQ_TYPE_NONE>;
 			status		= "disabled";
-			dr_mode		= "host";
 
 			clocks		= <&gcc USB_HS1_XCVR_CLK>,
 					  <&gcc USB_HS1_H_CLK>;
@@ -853,6 +1004,8 @@
 			sdcc1: sdcc@12400000 {
 				status		= "disabled";
 				compatible	= "arm,pl18x", "arm,primecell";
+				pinctrl-names	= "default";
+				pinctrl-0	= <&sdcc1_pins>;
 				arm,primecell-periphid = <0x00051180>;
 				reg		= <0x12400000 0x2000>;
 				interrupts	= <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
@@ -911,6 +1064,231 @@
 			reg = <0x1a400000 0x100>;
 		};
 
+		gpu: adreno-3xx@4300000 {
+			compatible = "qcom,adreno-3xx";
+			reg = <0x04300000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <GIC_SPI 80 0>;
+			interrupt-names = "kgsl_3d0_irq";
+			clock-names =
+			    "core_clk",
+			    "iface_clk",
+			    "mem_clk",
+			    "mem_iface_clk";
+			clocks =
+			    <&mmcc GFX3D_CLK>,
+			    <&mmcc GFX3D_AHB_CLK>,
+			    <&mmcc GFX3D_AXI_CLK>,
+			    <&mmcc MMSS_IMEM_AHB_CLK>;
+			qcom,chipid = <0x03020002>;
+
+			iommus = <&gfx3d 0
+				  &gfx3d 1
+				  &gfx3d 2
+				  &gfx3d 3
+				  &gfx3d 4
+				  &gfx3d 5
+				  &gfx3d 6
+				  &gfx3d 7
+				  &gfx3d 8
+				  &gfx3d 9
+				  &gfx3d 10
+				  &gfx3d 11
+				  &gfx3d 12
+				  &gfx3d 13
+				  &gfx3d 14
+				  &gfx3d 15
+				  &gfx3d 16
+				  &gfx3d 17
+				  &gfx3d 18
+				  &gfx3d 19
+				  &gfx3d 20
+				  &gfx3d 21
+				  &gfx3d 22
+				  &gfx3d 23
+				  &gfx3d 24
+				  &gfx3d 25
+				  &gfx3d 26
+				  &gfx3d 27
+				  &gfx3d 28
+				  &gfx3d 29
+				  &gfx3d 30
+				  &gfx3d 31
+				  &gfx3d1 0
+				  &gfx3d1 1
+				  &gfx3d1 2
+				  &gfx3d1 3
+				  &gfx3d1 4
+				  &gfx3d1 5
+				  &gfx3d1 6
+				  &gfx3d1 7
+				  &gfx3d1 8
+				  &gfx3d1 9
+				  &gfx3d1 10
+				  &gfx3d1 11
+				  &gfx3d1 12
+				  &gfx3d1 13
+				  &gfx3d1 14
+				  &gfx3d1 15
+				  &gfx3d1 16
+				  &gfx3d1 17
+				  &gfx3d1 18
+				  &gfx3d1 19
+				  &gfx3d1 20
+				  &gfx3d1 21
+				  &gfx3d1 22
+				  &gfx3d1 23
+				  &gfx3d1 24
+				  &gfx3d1 25
+				  &gfx3d1 26
+				  &gfx3d1 27
+				  &gfx3d1 28
+				  &gfx3d1 29
+				  &gfx3d1 30
+				  &gfx3d1 31>;
+
+			qcom,gpu-pwrlevels {
+				compatible = "qcom,gpu-pwrlevels";
+				qcom,gpu-pwrlevel@0 {
+					qcom,gpu-freq = <450000000>;
+				};
+				qcom,gpu-pwrlevel@1 {
+					qcom,gpu-freq = <27000000>;
+				};
+			};
+		};
+
+		mmss_sfpb: syscon@5700000 {
+			compatible = "syscon";
+			reg = <0x5700000 0x70>;
+		};
+
+		dsi0: mdss_dsi@4700000 {
+			compatible = "qcom,mdss-dsi-ctrl";
+			label = "MDSS DSI CTRL->0";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 82 0>;
+			reg = <0x04700000 0x200>;
+			reg-names = "dsi_ctrl";
+
+			clocks = <&mmcc DSI_M_AHB_CLK>,
+				<&mmcc DSI_S_AHB_CLK>,
+				<&mmcc AMP_AHB_CLK>,
+				<&mmcc DSI_CLK>,
+				<&mmcc DSI1_BYTE_CLK>,
+				<&mmcc DSI_PIXEL_CLK>,
+				<&mmcc DSI1_ESC_CLK>;
+			clock-names = "iface_clk", "bus_clk", "core_mmss_clk",
+					"src_clk", "byte_clk", "pixel_clk",
+					"core_clk";
+
+			assigned-clocks = <&mmcc DSI1_BYTE_SRC>,
+					<&mmcc DSI1_ESC_SRC>,
+					<&mmcc DSI_SRC>,
+					<&mmcc DSI_PIXEL_SRC>;
+			assigned-clock-parents = <&dsi0_phy 0>,
+						<&dsi0_phy 0>,
+						<&dsi0_phy 1>,
+						<&dsi0_phy 1>;
+			syscon-sfpb = <&mmss_sfpb>;
+			phys = <&dsi0_phy>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi0_in: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dsi0_out: endpoint {
+					};
+				};
+			};
+		};
+
+
+		dsi0_phy: dsi-phy@4700200 {
+			compatible = "qcom,dsi-phy-28nm-8960";
+			#clock-cells = <1>;
+
+			reg = <0x04700200 0x100>,
+				<0x04700300 0x200>,
+				<0x04700500 0x5c>;
+			reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
+			clock-names = "iface_clk";
+			clocks = <&mmcc DSI_M_AHB_CLK>;
+		};
+
+
+		mdp_port0: iommu@7500000 {
+			compatible = "qcom,apq8064-iommu";
+			#iommu-cells = <1>;
+			clock-names =
+			    "smmu_pclk",
+			    "iommu_clk";
+			clocks =
+			    <&mmcc SMMU_AHB_CLK>,
+			    <&mmcc MDP_AXI_CLK>;
+			reg = <0x07500000 0x100000>;
+			interrupts =
+			    <GIC_SPI 63 0>,
+			    <GIC_SPI 64 0>;
+			qcom,ncb = <2>;
+		};
+
+		mdp_port1: iommu@7600000 {
+			compatible = "qcom,apq8064-iommu";
+			#iommu-cells = <1>;
+			clock-names =
+			    "smmu_pclk",
+			    "iommu_clk";
+			clocks =
+			    <&mmcc SMMU_AHB_CLK>,
+			    <&mmcc MDP_AXI_CLK>;
+			reg = <0x07600000 0x100000>;
+			interrupts =
+			    <GIC_SPI 61 0>,
+			    <GIC_SPI 62 0>;
+			qcom,ncb = <2>;
+		};
+
+		gfx3d: iommu@7c00000 {
+			compatible = "qcom,apq8064-iommu";
+			#iommu-cells = <1>;
+			clock-names =
+			    "smmu_pclk",
+			    "iommu_clk";
+			clocks =
+			    <&mmcc SMMU_AHB_CLK>,
+			    <&mmcc GFX3D_AXI_CLK>;
+			reg = <0x07c00000 0x100000>;
+			interrupts =
+			    <GIC_SPI 69 0>,
+			    <GIC_SPI 70 0>;
+			qcom,ncb = <3>;
+		};
+
+		gfx3d1: iommu@7d00000 {
+			compatible = "qcom,apq8064-iommu";
+			#iommu-cells = <1>;
+			clock-names =
+			    "smmu_pclk",
+			    "iommu_clk";
+			clocks =
+			    <&mmcc SMMU_AHB_CLK>,
+			    <&mmcc GFX3D_AXI_CLK>;
+			reg = <0x07d00000 0x100000>;
+			interrupts =
+			    <GIC_SPI 210 0>,
+			    <GIC_SPI 211 0>;
+			qcom,ncb = <3>;
+		};
+
 		pcie: pci@1b500000 {
 			compatible = "qcom,pcie-apq8064", "snps,dw-pcie";
 			reg = <0x1b500000 0x1000
@@ -946,6 +1324,102 @@
 			reset-names = "axi", "ahb", "por", "pci", "phy";
 			status = "disabled";
 		};
+
+		hdmi: hdmi-tx@4a00000 {
+			compatible = "qcom,hdmi-tx-8960";
+			reg = <0x04a00000 0x2f0>;
+			reg-names = "core_physical";
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mmcc HDMI_APP_CLK>,
+				 <&mmcc HDMI_M_AHB_CLK>,
+				 <&mmcc HDMI_S_AHB_CLK>;
+			clock-names = "core_clk",
+				      "master_iface_clk",
+				      "slave_iface_clk";
+
+			phys = <&hdmi_phy>;
+			phy-names = "hdmi-phy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					hdmi_in: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					hdmi_out: endpoint {
+					};
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@4a00400 {
+			compatible = "qcom,hdmi-phy-8960";
+			reg = <0x4a00400 0x60>,
+			      <0x4a00500 0x100>;
+			reg-names = "hdmi_phy",
+				    "hdmi_pll";
+
+			clocks = <&mmcc HDMI_S_AHB_CLK>;
+			clock-names = "slave_iface_clk";
+		};
+
+		mdp: mdp@5100000 {
+			compatible = "qcom,mdp4";
+			reg = <0x05100000 0xf0000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mmcc MDP_CLK>,
+				 <&mmcc MDP_AHB_CLK>,
+				 <&mmcc MDP_AXI_CLK>,
+				 <&mmcc MDP_LUT_CLK>,
+				 <&mmcc HDMI_TV_CLK>,
+				 <&mmcc MDP_TV_CLK>;
+			clock-names = "core_clk",
+				      "iface_clk",
+				      "bus_clk",
+				      "lut_clk",
+				      "hdmi_clk",
+				      "tv_clk";
+
+			iommus = <&mdp_port0 0
+				  &mdp_port0 2
+				  &mdp_port1 0
+				  &mdp_port1 2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					mdp_lvds_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					mdp_dsi1_out: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					mdp_dsi2_out: endpoint {
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					mdp_dtv_out: endpoint {
+					};
+				};
+			};
+		};
 	};
 };
 #include "qcom-apq8064-pins.dtsi"
diff --git a/src/arm/qcom-apq8074-dragonboard.dts b/src/arm/qcom-apq8074-dragonboard.dts
index c0e205315042..ad51df27dfb7 100644
--- a/src/arm/qcom-apq8074-dragonboard.dts
+++ b/src/arm/qcom-apq8074-dragonboard.dts
@@ -25,11 +25,23 @@
 			bus-width = <8>;
 			non-removable;
 			status = "ok";
+
+			vmmc-supply = <&pm8941_l20>;
+			vqmmc-supply = <&pm8941_s3>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdhc1_pin_a>;
 		};
 
 		sdhci@f98a4900 {
 			cd-gpios = <&msmgpio 62 0x1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
 			bus-width = <4>;
+			status = "ok";
+
+			vmmc-supply = <&pm8941_l21>;
+			vqmmc-supply = <&pm8941_l13>;
 		};
 
 
@@ -59,6 +71,42 @@
 					function = "blsp_spi8";
 				};
 			};
+
+			sdhc1_pin_a: sdhc1-pin-active {
+				clk {
+					pins = "sdc1_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-data {
+					pins = "sdc1_cmd", "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdhc2_cd_pin_a: sdhc2-cd-pin-active {
+				pins = "gpio62";
+				function = "gpio";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdhc2_pin_a: sdhc2-pin-active {
+				clk {
+					pins = "sdc2_clk";
+					drive-strength = <10>;
+					bias-disable;
+				};
+
+				cmd-data {
+					pins = "sdc2_cmd", "sdc2_data";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+			};
 		};
 
 		i2c@f9967000 {
@@ -75,4 +123,203 @@
 			};
 		};
 	};
+
+	smd {
+		rpm {
+			rpm_requests {
+				pm8841-regulators {
+					s1 {
+						regulator-min-microvolt = <675000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s2 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s3 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s4 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+				};
+
+				pm8941-regulators {
+					vdd_l1_l3-supply = <&pm8941_s1>;
+					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+					vdd_l4_l11-supply = <&pm8941_s1>;
+					vdd_l5_l7-supply = <&pm8941_s2>;
+					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+					vin_5vs-supply = <&pm8941_5v>;
+
+					s1 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					s2 {
+						regulator-min-microvolt = <2150000>;
+						regulator-max-microvolt = <2150000>;
+						regulator-boot-on;
+					};
+
+					s3 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l1 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l2 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					l3 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					l4 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					l5 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l6 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l7 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l8 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l9 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					l10 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+					};
+
+					l11 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+					};
+
+					l12 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l13 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l14 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l15 {
+						regulator-min-microvolt = <2050000>;
+						regulator-max-microvolt = <2050000>;
+					};
+
+					l16 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					l17 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					l18 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					l19 {
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+					};
+
+					l20 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-allow-set-load;
+						regulator-boot-on;
+						regulator-system-load = <200000>;
+					};
+
+					l21 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l22 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					l23 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					l24 {
+						regulator-min-microvolt = <3075000>;
+						regulator-max-microvolt = <3075000>;
+
+						regulator-boot-on;
+					};
+				};
+			};
+		};
+	};
 };
diff --git a/src/arm/qcom-apq8084.dtsi b/src/arm/qcom-apq8084.dtsi
index a33a09f6821e..80d48867107f 100644
--- a/src/arm/qcom-apq8084.dtsi
+++ b/src/arm/qcom-apq8084.dtsi
@@ -86,19 +86,109 @@
 		};
 	};
 
+	firmware {
+		scm {
+			compatible = "qcom,scm";
+			clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
 		interrupts = <1 7 0xf04>;
 	};
 
 	clocks {
-		xo_board {
+		xo_board: xo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <19200000>;
 		};
 
-		sleep_clk {
+		sleep_clk: sleep_clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
@@ -142,6 +232,27 @@
 			reg = <0xf9011000 0x1000>;
 		};
 
+		qfprom: qfprom@fc4bc000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "qcom,qfprom";
+			reg = <0xfc4bc000 0x1000>;
+			tsens_calib: calib@d0 {
+				reg = <0xd0 0x18>;
+			};
+			tsens_backup: backup@440 {
+				reg = <0x440 0x10>;
+			};
+		};
+
+		tsens: thermal-sensor@fc4a8000 {
+			compatible = "qcom,msm8974-tsens";
+			reg = <0xfc4a8000 0x2000>;
+			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+			nvmem-cell-names = "calib", "calib_backup";
+			#thermal-sensor-cells = <1>;
+		};
+
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -305,8 +416,10 @@
 			reg-names = "hc_mem", "core_mem";
 			interrupts = <0 123 0>, <0 138 0>;
 			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
-			clock-names = "core", "iface";
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "core", "iface", "xo";
 			status = "disabled";
 		};
 
@@ -316,8 +429,10 @@
 			reg-names = "hc_mem", "core_mem";
 			interrupts = <0 125 0>, <0 221 0>;
 			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
-			clock-names = "core", "iface";
+			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "core", "iface", "xo";
 			status = "disabled";
 		};
 
diff --git a/src/arm/qcom-ipq4019.dtsi b/src/arm/qcom-ipq4019.dtsi
index 5c08d19066c2..b7a24af8f47b 100644
--- a/src/arm/qcom-ipq4019.dtsi
+++ b/src/arm/qcom-ipq4019.dtsi
@@ -84,6 +84,12 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
+					 IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
 	clocks {
 		sleep_clk: sleep_clk {
 			compatible = "fixed-clock";
@@ -252,7 +258,7 @@
 		};
 
 		watchdog@b017000 {
-			compatible = "qcom,kpss-standalone";
+			compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019";
 			reg = <0xb017000 0x40>;
 			clocks = <&sleep_clk>;
 			timeout-sec = <10>;
diff --git a/src/arm/qcom-ipq8064-ap148.dts b/src/arm/qcom-ipq8064-ap148.dts
index d501382493e3..348503d1a1c1 100644
--- a/src/arm/qcom-ipq8064-ap148.dts
+++ b/src/arm/qcom-ipq8064-ap148.dts
@@ -95,6 +95,7 @@
 		};
 
 		sata@29000000 {
+			ports-implemented = <0x1>;
 			status = "ok";
 		};
 	};
diff --git a/src/arm/qcom-ipq8064.dtsi b/src/arm/qcom-ipq8064.dtsi
index 2601a907947b..2e375576ffd0 100644
--- a/src/arm/qcom-ipq8064.dtsi
+++ b/src/arm/qcom-ipq8064.dtsi
@@ -122,7 +122,8 @@
 		};
 
 		timer@200a000 {
-			compatible = "qcom,kpss-timer", "qcom,msm-timer";
+			compatible = "qcom,kpss-timer",
+				     "qcom,kpss-wdt-ipq8064", "qcom,msm-timer";
 			interrupts = <1 1 0x301>,
 				     <1 2 0x301>,
 				     <1 3 0x301>,
diff --git a/src/arm/qcom-mdm9615-wp8548-mangoh-green.dts b/src/arm/qcom-mdm9615-wp8548-mangoh-green.dts
new file mode 100644
index 000000000000..26160c324802
--- /dev/null
+++ b/src/arm/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -0,0 +1,281 @@
+/*
+ * Device Tree Source for mangOH Green Board with WP8548 Module
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+
+#include "qcom-mdm9615-wp8548.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MangOH Green with WP8548 Module";
+	compatible = "swir,mangoh-green-wp8548", "swir,wp8548", "qcom,mdm9615";
+
+	aliases {
+		spi0 = &gsbi3_spi;
+		serial0 = &gsbi4_serial;
+		serial1 = &gsbi5_serial;
+		i2c0 = &gsbi5_i2c;
+		mmc0 = &sdcc1;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&msmgpio {
+	/* MangOH GPIO Mapping :
+	 * - 2 : GPIOEXP_INT2
+	 * - 7 : IOT1_GPIO2
+	 * - 8 : IOT0_GPIO4
+	 * - 13: IOT0_GPIO3
+	 * - 21: IOT1_GPIO4
+	 * - 22: IOT2_GPIO1
+	 * - 23: IOT2_GPIO2
+	 * - 24: IOT2_GPIO3
+	 * - 25: IOT1_GPIO1
+	 * - 32: IOT1_GPIO3
+	 * - 33: IOT0_GPIO2
+	 * - 42: IOT0_GPIO1 and SD Card Detect
+	 */
+
+	gpioext1_pins: gpioext1_pins {
+		pins {
+			pins = "gpio2";
+			function = "gpio";
+			input-enable;
+			bias-disable;
+		};
+	};
+
+	sdc_cd_pins: sdc_cd_pins {
+		pins {
+			pins = "gpio42";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&gsbi3_spi {
+	spi@0 {
+		compatible = "swir,mangoh-iotport-spi", "spidev";
+		spi-max-frequency = <24000000>;
+		reg = <0>;
+	};
+};
+
+&gsbi5_i2c {
+	mux@71 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		i2c_iot0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_iot1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_iot2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			usbhub: hub@8 {
+				compatible = "smsc,usb3503a";
+				reg = <0x8>;
+				connect-gpios = <&gpioext2 1 GPIO_ACTIVE_HIGH>;
+				intn-gpios = <&gpioext2 0 GPIO_ACTIVE_LOW>;
+				initial-mode = <1>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			gpioext0: gpio@3e {
+				/* GPIO Expander 0 Mapping :
+				 * - 0: ARDUINO_RESET_Level shift
+				 * - 1: BattChrgr_PG_N
+				 * - 2: BattGauge_GPIO
+				 * - 3: LED_ON (out active high)
+				 * - 4: ATmega_reset_GPIO
+				 * - 5: X
+				 * - 6: PCM_ANALOG_SELECT (out active high)
+				 * - 7: X
+				 * - 8: Board_rev_res1 (in)
+				 * - 9: Board_rev_res2 (in)
+				 * - 10: UART_EXP1_ENn (out active low / pull-down)
+				 * - 11: UART_EXP1_IN (out pull-down)
+				 * - 12: UART_EXP2_IN (out pull-down)
+				 * - 13: SDIO_SEL (out pull-down)
+				 * - 14: SPI_EXP1_ENn (out active low / pull-down)
+				 * - 15: SPI_EXP1_IN (out pull-down)
+				 */
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "semtech,sx1509q";
+				reg = <0x3e>;
+				interrupt-parent = <&gpioext1>;
+				interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+				probe-reset;
+
+				gpio-controller;
+				interrupt-controller;
+			};
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			gpioext1: gpio@3f {
+				/* GPIO Expander 1 Mapping :
+				 * - 0: GPIOEXP_INT1
+				 * - 1: Battery detect
+				 * - 2: GPIO_SCF3_RESET
+				 * - 3: LED_CARD_DETECT_IOT0 (in)
+				 * - 4: LED_CARD_DETECT_IOT1 (in)
+				 * - 5: LED_CARD_DETECT_IOT2 (in)
+				 * - 6: UIM2_PWM_SELECT
+				 * - 7: UIM2_M2_S_SELECT
+				 * - 8: TP900
+				 * - 9: SENSOR_INT1 (in)
+				 * - 10: SENSOR_INT2 (in)
+				 * - 11: CARD_DETECT_IOT0 (in pull-up)
+				 * - 12: CARD_DETECT_IOT2 (in pull-up)
+				 * - 13: CARD_DETECT_IOT1 (in pull-up)
+				 * - 14: GPIOEXP_INT3 (in active low / pull-up)
+				 * - 15: BattChrgr_INT_N
+				 */
+				pinctrl-0 = <&gpioext1_pins>;
+				pinctrl-names = "default";
+
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "semtech,sx1509q";
+				reg = <0x3f>;
+				interrupt-parent = <&msmgpio>;
+				interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+				probe-reset;
+
+				gpio-controller;
+				interrupt-controller;
+			};
+		};
+
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			gpioext2: gpio@70 {
+				/* GPIO Expander 2 Mapping :
+				 * - 0: USB_HUB_INTn
+				 * - 1: HUB_CONNECT
+				 * - 2: GPIO_IOT2_RESET (out active low / pull-up)
+				 * - 3: GPIO_IOT1_RESET (out active low / pull-up)
+				 * - 4: GPIO_IOT0_RESET (out active low / pull-up)
+				 * - 5: TP901
+				 * - 6: TP902
+				 * - 7: TP903
+				 * - 8: UART_EXP2_ENn (out active low / pull-down)
+				 * - 9: PCM_EXP1_ENn (out active low)
+				 * - 10: PCM_EXP1_SEL (out)
+				 * - 11: ARD_FTDI
+				 * - 12: TP904
+				 * - 13: TP905
+				 * - 14: TP906
+				 * - 15: RS232_Enable (out active high / pull-up)
+				 */
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "semtech,sx1509q";
+				reg = <0x70>;
+				interrupt-parent = <&gpioext1>;
+				interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+
+				probe-reset;
+
+				gpio-controller;
+				interrupt-controller;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&sdcc1 {
+	pinctrl-0 = <&sdc_cd_pins>;
+	pinctrl-names = "default";
+	disable-wp;
+	cd-gpios = <&msmgpio 42 GPIO_ACTIVE_LOW>; /* Active low CD */
+};
diff --git a/src/arm/qcom-mdm9615-wp8548.dtsi b/src/arm/qcom-mdm9615-wp8548.dtsi
new file mode 100644
index 000000000000..7869898e392d
--- /dev/null
+++ b/src/arm/qcom-mdm9615-wp8548.dtsi
@@ -0,0 +1,170 @@
+/*
+ * Device Tree Source for Sierra Wireless WP8548 Module
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "qcom-mdm9615.dtsi"
+
+/ {
+	model = "Sierra Wireless WP8548 Module";
+	compatible = "swir,wp8548", "qcom,mdm9615";
+
+	memory {
+		reg = <0x48000000 0x7F00000>;
+	};
+};
+
+&msmgpio {
+	pinctrl-0 = <&reset_out_pins>;
+	pinctrl-names = "default";
+
+	gsbi3_pins: gsbi3_pins {
+		mux {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "gsbi3";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	gsbi4_pins: gsbi4_pins {
+		mux {
+			pins = "gpio12", "gpio13", "gpio14", "gpio15";
+			function = "gsbi4";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	gsbi5_i2c_pins: gsbi5_i2c_pins {
+		pin16 {
+			pins = "gpio16";
+			function = "gsbi5_i2c";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		pin17 {
+			pins = "gpio17";
+			function = "gsbi5_i2c";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	gsbi5_uart_pins: gsbi5_uart_pins {
+		mux {
+			pins = "gpio18", "gpio19";
+			function = "gsbi5_uart";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	reset_out_pins: reset_out_pins {
+		pins {
+			pins = "gpio66";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+			output-high;
+		};
+	};
+};
+
+&pmicgpio {
+	usb_vbus_5v_pins: usb_vbus_5v_pins {
+		pins = "gpio4";
+		function = "normal";
+		output-high;
+		bias-disable;
+		qcom,drive-strength = <1>;
+		power-source = <2>;
+	};
+};
+
+&gsbi3 {
+	status = "ok";
+	qcom,mode = <GSBI_PROT_SPI>;
+};
+
+&gsbi3_spi {
+	status = "ok";
+	pinctrl-0 = <&gsbi3_pins>;
+	pinctrl-names = "default";
+	assigned-clocks = <&gcc GSBI3_QUP_CLK>;
+	assigned-clock-rates = <24000000>;
+};
+
+&gsbi4 {
+	status = "ok";
+	qcom,mode = <GSBI_PROT_UART_W_FC>;
+};
+
+&gsbi4_serial {
+	status = "ok";
+	pinctrl-0 = <&gsbi4_pins>;
+	pinctrl-names = "default";
+};
+
+&gsbi5 {
+	status = "ok";
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+};
+
+&gsbi5_i2c {
+	status = "ok";
+	clock-frequency = <200000>;
+	pinctrl-0 = <&gsbi5_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&gsbi5_serial {
+	status = "ok";
+	pinctrl-0 = <&gsbi5_uart_pins>;
+	pinctrl-names = "default";
+};
+
+&sdcc1 {
+	status = "ok";
+};
diff --git a/src/arm/qcom-mdm9615.dtsi b/src/arm/qcom-mdm9615.dtsi
new file mode 100644
index 000000000000..c852b69229c9
--- /dev/null
+++ b/src/arm/qcom-mdm9615.dtsi
@@ -0,0 +1,557 @@
+/*
+ * Device Tree Source for Qualcomm MDM9615 SoC
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-mdm9615.h>
+#include <dt-bindings/reset/qcom,gcc-mdm9615.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+	model = "Qualcomm MDM9615";
+	compatible = "qcom,mdm9615";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a5";
+			device_type = "cpu";
+			next-level-cache = <&L2>;
+		};
+	};
+
+	cpu-pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	clocks {
+		cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+	};
+
+	regulators {
+		vsdcc_fixed: vsdcc-regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "SDCC Power";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-always-on;
+		};
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		L2: l2-cache@2040000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x02040000 0x1000>;
+			arm,data-latency = <2 2 0>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-timer", "qcom,msm-timer";
+			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <27000000>,
+					  <32768>;
+			cpu-offset = <0x80000>;
+		};
+
+		msmgpio: pinctrl@800000 {
+			compatible = "qcom,mdm9615-pinctrl";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x800000 0x4000>;
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-mdm9615";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x900000 0x4000>;
+		};
+
+		lcc: clock-controller@28000000 {
+			compatible = "qcom,lcc-mdm9615";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		l2cc: clock-controller@2011000 {
+			compatible = "syscon";
+			reg = <0x02011000 0x1000>;
+		};
+
+		rng@1a500000 {
+			compatible = "qcom,prng";
+			reg = <0x1a500000 0x200>;
+			clocks = <&gcc PRNG_CLK>;
+			clock-names = "core";
+			assigned-clocks = <&gcc PRNG_CLK>;
+			assigned-clock-rates = <32000000>;
+		};
+
+		gsbi2: gsbi@16100000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <2>;
+			reg = <0x16100000 0x100>;
+			clocks = <&gcc GSBI2_H_CLK>;
+			clock-names = "iface";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi2_i2c: i2c@16180000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16180000 0x1000>;
+				interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi3: gsbi@16200000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <3>;
+			reg = <0x16200000 0x100>;
+			clocks = <&gcc GSBI3_H_CLK>;
+			clock-names = "iface";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi3_spi: spi@16280000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16280000 0x1000>;
+				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <24000000>;
+
+				clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi4: gsbi@16300000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <4>;
+			reg = <0x16300000 0x100>;
+			clocks = <&gcc GSBI4_H_CLK>;
+			clock-names = "iface";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi4_serial: serial@16340000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16340000 0x1000>,
+				      <0x16300000 0x1000>;
+				interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi5: gsbi@16400000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <5>;
+			reg = <0x16400000 0x100>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi5_i2c: i2c@16480000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16480000 0x1000>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+
+				/* QUP clock is not initialized, set rate */
+				assigned-clocks = <&gcc GSBI5_QUP_CLK>;
+				assigned-clock-rates = <24000000>;
+
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi5_serial: serial@16440000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16440000 0x1000>,
+				      <0x16400000 0x1000>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+
+			pmicintc: pmic@0 {
+				compatible = "qcom,pm8018", "qcom,pm8921";
+				interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pwrkey@1c {
+					compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
+					reg = <0x1c>;
+					interrupt-parent = <&pmicintc>;
+					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
+						     <51 IRQ_TYPE_EDGE_RISING>;
+					debounce = <15625>;
+					pull-up;
+				};
+
+				pmicmpp: mpp@50 {
+					compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
+					interrupt-parent = <&pmicintc>;
+					interrupts = <24 IRQ_TYPE_NONE>,
+						     <25 IRQ_TYPE_NONE>,
+						     <26 IRQ_TYPE_NONE>,
+						     <27 IRQ_TYPE_NONE>,
+						     <28 IRQ_TYPE_NONE>,
+						     <29 IRQ_TYPE_NONE>;
+					reg = <0x50>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				rtc@11d {
+					compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
+					interrupt-parent = <&pmicintc>;
+					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
+					reg = <0x11d>;
+					allow-set-time;
+				};
+
+				pmicgpio: gpio@150 {
+					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
+					interrupt-parent = <&pmicintc>;
+					interrupts = <24 IRQ_TYPE_NONE>,
+						     <25 IRQ_TYPE_NONE>,
+						     <26 IRQ_TYPE_NONE>,
+						     <27 IRQ_TYPE_NONE>,
+						     <28 IRQ_TYPE_NONE>,
+						     <29 IRQ_TYPE_NONE>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+		};
+
+		sdcc1bam: dma@12182000{
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12182000 0x8000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		sdcc2bam: dma@12142000{
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12142000 0x8000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC2_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		amba {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			sdcc1: sdcc@12180000 {
+				status = "disabled";
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				reg = <0x12180000 0x2000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <8>;
+				max-frequency = <48000000>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				vmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+				dma-names = "tx", "rx";
+				assigned-clocks = <&gcc SDC1_CLK>;
+				assigned-clock-rates = <400000>;
+			};
+
+			sdcc2: sdcc@12140000 {
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status = "disabled";
+				reg = <0x12140000 0x2000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <4>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency = <48000000>;
+				no-1-8-v;
+				vmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc2bam 2>, <&sdcc2bam 1>;
+				dma-names = "tx", "rx";
+				assigned-clocks = <&gcc SDC2_CLK>;
+				assigned-clock-rates = <400000>;
+			};
+		};
+
+		tcsr: syscon@1a400000 {
+			compatible = "qcom,tcsr-mdm9615", "syscon";
+			reg = <0x1a400000 0x100>;
+		};
+
+		rpm: rpm@108000 {
+			compatible = "qcom,rpm-mdm9615";
+			reg = <0x108000 0x1000>;
+
+			qcom,ipc = <&l2cc 0x8 2>;
+
+			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names	= "ack", "err", "wakeup";
+
+			regulators {
+				compatible = "qcom,rpm-pm8018-regulators";
+
+				vin_lvs1-supply = <&pm8018_s3>;
+
+				vdd_l7-supply = <&pm8018_s4>;
+				vdd_l8-supply = <&pm8018_s3>;
+				vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
+
+				/* Buck SMPS */
+				pm8018_s1: s1 {
+					regulator-min-microvolt = <500000>;
+					regulator-max-microvolt = <1150000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8018_s2: s2 {
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8018_s3: s3 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8018_s4: s4 {
+					regulator-min-microvolt = <2100000>;
+					regulator-max-microvolt = <2200000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8018_s5: s5 {
+					regulator-always-on;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				/* PMOS LDO */
+				pm8018_l2: l2 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8018_l3: l3 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8018_l4: l4 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					bias-pull-down;
+				};
+
+				pm8018_l5: l5 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+
+				pm8018_l6: l6 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+
+				pm8018_l7: l7 {
+					regulator-min-microvolt = <1850000>;
+					regulator-max-microvolt = <1900000>;
+					bias-pull-down;
+				};
+
+				pm8018_l8: l8 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				pm8018_l9: l9 {
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1150000>;
+					bias-pull-down;
+				};
+
+				pm8018_l10: l10 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				pm8018_l11: l11 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				pm8018_l12: l12 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				pm8018_l13: l13 {
+					regulator-min-microvolt = <1850000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8018_l14: l14 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+
+				/* Low Voltage Switch */
+				pm8018_lvs1: lvs1 {
+					bias-pull-down;
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/qcom-msm8660-surf.dts b/src/arm/qcom-msm8660-surf.dts
index b17f379e8c2a..23de764558ab 100644
--- a/src/arm/qcom-msm8660-surf.dts
+++ b/src/arm/qcom-msm8660-surf.dts
@@ -23,15 +23,26 @@
 			};
 		};
 
+		/* Temporary fixed regulator */
+		vsdcc_fixed: vsdcc-regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "SDCC Power";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-always-on;
+		};
+
 		amba {
 			/* eMMC */
 			sdcc1: sdcc@12400000 {
 				status = "okay";
+				vmmc-supply = <&vsdcc_fixed>;
 			};
 
 			/* External micro SD card */
 			sdcc3: sdcc@12180000 {
 				status = "okay";
+				vmmc-supply = <&vsdcc_fixed>;
 			};
 		};
 	};
diff --git a/src/arm/qcom-msm8660.dtsi b/src/arm/qcom-msm8660.dtsi
index cd214030b84a..4d828f810746 100644
--- a/src/arm/qcom-msm8660.dtsi
+++ b/src/arm/qcom-msm8660.dtsi
@@ -2,6 +2,7 @@
 
 /include/ "skeleton.dtsi"
 
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8660.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
@@ -122,11 +123,39 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x19c40000 0x1000>,
 				      <0x19c00000 0x1000>;
-				interrupts = <0 195 0x0>;
+				interrupts = <0 195 IRQ_TYPE_NONE>;
 				clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
 			};
+
+			gsbi12_i2c: i2c@19c80000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x19c80000 0x1000>;
+				interrupts = <0 196 IRQ_TYPE_NONE>;
+				clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		external-bus@1a100000 {
+			compatible = "qcom,msm8660-ebi2";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x1a800000 0x00800000>,
+				 <1 0x0 0x1b000000 0x00800000>,
+				 <2 0x0 0x1b800000 0x00800000>,
+				 <3 0x0 0x1d000000 0x08000000>,
+				 <4 0x0 0x1c800000 0x00800000>,
+				 <5 0x0 0x1c000000 0x00800000>;
+			reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>;
+			reg-names = "ebi2", "xmem";
+			clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>;
+			clock-names = "ebi2x", "ebi2";
+			status = "disabled";
 		};
 
 		qcom,ssbi@500000 {
@@ -143,6 +172,82 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				pm8058_gpio: gpio@150 {
+					compatible = "qcom,pm8058-gpio",
+						     "qcom,ssbi-gpio";
+					reg = <0x150>;
+					interrupt-parent = <&pmicintc>;
+					interrupts = <192 IRQ_TYPE_NONE>,
+						     <193 IRQ_TYPE_NONE>,
+						     <194 IRQ_TYPE_NONE>,
+						     <195 IRQ_TYPE_NONE>,
+						     <196 IRQ_TYPE_NONE>,
+						     <197 IRQ_TYPE_NONE>,
+						     <198 IRQ_TYPE_NONE>,
+						     <199 IRQ_TYPE_NONE>,
+						     <200 IRQ_TYPE_NONE>,
+						     <201 IRQ_TYPE_NONE>,
+						     <202 IRQ_TYPE_NONE>,
+						     <203 IRQ_TYPE_NONE>,
+						     <204 IRQ_TYPE_NONE>,
+						     <205 IRQ_TYPE_NONE>,
+						     <206 IRQ_TYPE_NONE>,
+						     <207 IRQ_TYPE_NONE>,
+						     <208 IRQ_TYPE_NONE>,
+						     <209 IRQ_TYPE_NONE>,
+						     <210 IRQ_TYPE_NONE>,
+						     <211 IRQ_TYPE_NONE>,
+						     <212 IRQ_TYPE_NONE>,
+						     <213 IRQ_TYPE_NONE>,
+						     <214 IRQ_TYPE_NONE>,
+						     <215 IRQ_TYPE_NONE>,
+						     <216 IRQ_TYPE_NONE>,
+						     <217 IRQ_TYPE_NONE>,
+						     <218 IRQ_TYPE_NONE>,
+						     <219 IRQ_TYPE_NONE>,
+						     <220 IRQ_TYPE_NONE>,
+						     <221 IRQ_TYPE_NONE>,
+						     <222 IRQ_TYPE_NONE>,
+						     <223 IRQ_TYPE_NONE>,
+						     <224 IRQ_TYPE_NONE>,
+						     <225 IRQ_TYPE_NONE>,
+						     <226 IRQ_TYPE_NONE>,
+						     <227 IRQ_TYPE_NONE>,
+						     <228 IRQ_TYPE_NONE>,
+						     <229 IRQ_TYPE_NONE>,
+						     <230 IRQ_TYPE_NONE>,
+						     <231 IRQ_TYPE_NONE>,
+						     <232 IRQ_TYPE_NONE>,
+						     <233 IRQ_TYPE_NONE>,
+						     <234 IRQ_TYPE_NONE>,
+						     <235 IRQ_TYPE_NONE>;
+					gpio-controller;
+					#gpio-cells = <2>;
+
+				};
+
+				pm8058_mpps: mpps@50 {
+					compatible = "qcom,pm8058-mpp",
+						     "qcom,ssbi-mpp";
+					reg = <0x50>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-parent = <&pmicintc>;
+					interrupts =
+					<128 IRQ_TYPE_NONE>,
+					<129 IRQ_TYPE_NONE>,
+					<130 IRQ_TYPE_NONE>,
+					<131 IRQ_TYPE_NONE>,
+					<132 IRQ_TYPE_NONE>,
+					<133 IRQ_TYPE_NONE>,
+					<134 IRQ_TYPE_NONE>,
+					<135 IRQ_TYPE_NONE>,
+					<136 IRQ_TYPE_NONE>,
+					<137 IRQ_TYPE_NONE>,
+					<138 IRQ_TYPE_NONE>,
+					<139 IRQ_TYPE_NONE>;
+				};
+
 				pwrkey@1c {
 					compatible = "qcom,pm8058-pwrkey";
 					reg = <0x1c>;
@@ -162,11 +267,11 @@
 					row-hold = <91500>;
 				};
 
-				rtc@11d {
+				rtc@1e8 {
 					compatible = "qcom,pm8058-rtc";
+					reg = <0x1e8>;
 					interrupt-parent = <&pmicintc>;
 					interrupts = <39 1>;
-					reg = <0x11d>;
 					allow-set-time;
 				};
 
@@ -177,13 +282,93 @@
 			};
 		};
 
-		/* Temporary fixed regulator */
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-always-on;
+		l2cc: clock-controller@2082000 {
+			compatible	= "syscon";
+			reg		= <0x02082000 0x1000>;
+		};
+
+		rpm: rpm@104000 {
+			compatible	= "qcom,rpm-msm8660";
+			reg		= <0x00104000 0x1000>;
+			qcom,ipc	= <&l2cc 0x8 2>;
+
+			interrupts	= <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names	= "ack", "err", "wakeup";
+			clocks = <&gcc RPM_MSG_RAM_H_CLK>;
+			clock-names = "ram";
+
+			rpmcc: clock-controller {
+				compatible	= "qcom,rpmcc-apq8660", "qcom,rpmcc";
+				#clock-cells = <1>;
+			};
+
+			pm8901-regulators {
+				compatible = "qcom,rpm-pm8901-regulators";
+
+				pm8901_l0: l0 {};
+				pm8901_l1: l1 {};
+				pm8901_l2: l2 {};
+				pm8901_l3: l3 {};
+				pm8901_l4: l4 {};
+				pm8901_l5: l5 {};
+				pm8901_l6: l6 {};
+
+				/* S0 and S1 Handled as SAW regulators by SPM */
+				pm8901_s2: s2 {};
+				pm8901_s3: s3 {};
+				pm8901_s4: s4 {};
+
+				pm8901_lvs0: lvs0 {};
+				pm8901_lvs1: lvs1 {};
+				pm8901_lvs2: lvs2 {};
+				pm8901_lvs3: lvs3 {};
+
+				pm8901_mvs: mvs {};
+			};
+
+			pm8058-regulators {
+				compatible = "qcom,rpm-pm8058-regulators";
+
+				pm8058_l0: l0 {};
+				pm8058_l1: l1 {};
+				pm8058_l2: l2 {};
+				pm8058_l3: l3 {};
+				pm8058_l4: l4 {};
+				pm8058_l5: l5 {};
+				pm8058_l6: l6 {};
+				pm8058_l7: l7 {};
+				pm8058_l8: l8 {};
+				pm8058_l9: l9 {};
+				pm8058_l10: l10 {};
+				pm8058_l11: l11 {};
+				pm8058_l12: l12 {};
+				pm8058_l13: l13 {};
+				pm8058_l14: l14 {};
+				pm8058_l15: l15 {};
+				pm8058_l16: l16 {};
+				pm8058_l17: l17 {};
+				pm8058_l18: l18 {};
+				pm8058_l19: l19 {};
+				pm8058_l20: l20 {};
+				pm8058_l21: l21 {};
+				pm8058_l22: l22 {};
+				pm8058_l23: l23 {};
+				pm8058_l24: l24 {};
+				pm8058_l25: l25 {};
+
+				pm8058_s0: s0 {};
+				pm8058_s1: s1 {};
+				pm8058_s2: s2 {};
+				pm8058_s3: s3 {};
+				pm8058_s4: s4 {};
+
+				pm8058_lvs0: lvs0 {};
+				pm8058_lvs1: lvs1 {};
+
+				pm8058_ncp: ncp {};
+			};
 		};
 
 		amba {
@@ -205,7 +390,6 @@
 				non-removable;
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
-				vmmc-supply = <&vsdcc_fixed>;
 			};
 
 			sdcc3: sdcc@12180000 {
@@ -222,7 +406,21 @@
 				cap-mmc-highspeed;
 				max-frequency	= <48000000>;
 				no-1-8-v;
-				vmmc-supply = <&vsdcc_fixed>;
+			};
+
+			sdcc5: sdcc@12200000 {
+				compatible	= "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status		= "disabled";
+				reg		= <0x12200000 0x8000>;
+				interrupts	= <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks		= <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
+				clock-names	= "mclk", "apb_pclk";
+				bus-width	= <4>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency	= <48000000>;
 			};
 		};
 
diff --git a/src/arm/qcom-msm8960.dtsi b/src/arm/qcom-msm8960.dtsi
index da05e28a81a7..288f56e0ccf5 100644
--- a/src/arm/qcom-msm8960.dtsi
+++ b/src/arm/qcom-msm8960.dtsi
@@ -87,7 +87,8 @@
 		};
 
 		timer@200a000 {
-			compatible = "qcom,kpss-timer", "qcom,msm-timer";
+			compatible = "qcom,kpss-timer",
+				     "qcom,kpss-wdt-msm8960", "qcom,msm-timer";
 			interrupts = <1 1 0x301>,
 				     <1 2 0x301>,
 				     <1 3 0x301>;
diff --git a/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts b/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts
new file mode 100644
index 000000000000..382bcc3231a9
--- /dev/null
+++ b/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -0,0 +1,291 @@
+#include "qcom-msm8974.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "LGE MSM 8974 HAMMERHEAD";
+	compatible = "lge,hammerhead", "qcom,msm8974";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	smd {
+		rpm {
+			rpm_requests {
+				pm8841-regulators {
+					s1 {
+						regulator-min-microvolt = <675000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s2 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s3 {
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s4 {
+						regulator-min-microvolt = <815000>;
+						regulator-max-microvolt = <900000>;
+					};
+				};
+
+				pm8941-regulators {
+					vdd_l1_l3-supply = <&pm8941_s1>;
+					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+					vdd_l4_l11-supply = <&pm8941_s1>;
+					vdd_l5_l7-supply = <&pm8941_s2>;
+					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+					vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
+					vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+					vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+					vdd_l21-supply = <&vreg_boost>;
+
+					s1 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					s2 {
+						regulator-min-microvolt = <2150000>;
+						regulator-max-microvolt = <2150000>;
+
+						regulator-boot-on;
+					};
+
+					s3 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l1 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l2 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					l3 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					l4 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					l5 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l6 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l7 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l8 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l9 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					l10 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					l11 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+					};
+
+					l12 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l13 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l14 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l15 {
+						regulator-min-microvolt = <2050000>;
+						regulator-max-microvolt = <2050000>;
+					};
+
+					l16 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					l17 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					l18 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					l19 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					l20 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l21 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l22 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					l23 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					l24 {
+						regulator-min-microvolt = <3075000>;
+						regulator-max-microvolt = <3075000>;
+
+						regulator-boot-on;
+					};
+				};
+			};
+		};
+	};
+};
+
+&soc {
+	serial@f991d000 {
+		status = "ok";
+	};
+
+	pinctrl@fd510000 {
+		sdhc1_pin_a: sdhc1-pin-active {
+			clk {
+				pins = "sdc1_clk";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			cmd-data {
+				pins = "sdc1_cmd", "sdc1_data";
+				drive-strength = <10>;
+				bias-pull-up;
+			};
+		};
+	};
+
+	sdhci@f9824900 {
+		status = "ok";
+
+		vmmc-supply = <&pm8941_l20>;
+		vqmmc-supply = <&pm8941_s3>;
+
+		bus-width = <8>;
+		non-removable;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdhc1_pin_a>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+};
+
+&spmi_bus {
+	pm8941@0 {
+		gpios@c000 {
+			gpio_keys_pin_a: gpio-keys-active {
+				pins = "gpio2", "gpio3";
+				function = "normal";
+
+				bias-pull-up;
+				power-source = <PM8941_GPIO_S3>;
+			};
+		};
+	};
+};
diff --git a/src/arm/qcom-msm8974-sony-xperia-honami.dts b/src/arm/qcom-msm8974-sony-xperia-honami.dts
index a0398b69f4f2..e7c1577d56f4 100644
--- a/src/arm/qcom-msm8974-sony-xperia-honami.dts
+++ b/src/arm/qcom-msm8974-sony-xperia-honami.dts
@@ -257,23 +257,6 @@
 			};
 		};
 	};
-
-	vreg_boost: vreg-boost {
-		compatible = "regulator-fixed";
-
-		regulator-name = "vreg-boost";
-		regulator-min-microvolt = <3150000>;
-		regulator-max-microvolt = <3150000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&boost_bypass_n_pin>;
-     };
 };
 
 &soc {
@@ -311,6 +294,45 @@
 		pinctrl-0 = <&blsp1_uart2_pin_a>;
 	};
 
+	i2c@f9924000 {
+		status = "ok";
+
+		clock-frequency = <355000>;
+		qcom,src-freq = <50000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_pins>;
+
+		synaptics@2c {
+			compatible = "syna,rmi4-i2c";
+			reg = <0x2c>;
+
+			interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vdd-supply = <&pm8941_l22>;
+			vio-supply = <&pm8941_lvs3>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&ts_int_pin>;
+
+			syna,startup-delay-ms = <10>;
+
+			rmi4-f01@1 {
+				reg = <0x1>;
+				syna,nosleep-mode = <1>;
+			};
+
+			rmi4-f11@11 {
+				reg = <0x11>;
+				touchscreen-inverted-x;
+				syna,sensor-type = <1>;
+			};
+		};
+	};
+
 	pinctrl@fd510000 {
 		blsp1_uart2_pin_a: blsp1-uart2-pin-active {
 			rx {
@@ -330,6 +352,16 @@
 			};
 		};
 
+		i2c2_pins: i2c2 {
+			mux {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
 		sdhc1_pin_a: sdhc1-pin-active {
 			clk {
 				pins = "sdc1_clk";
@@ -366,6 +398,20 @@
 			};
 		};
 
+		ts_int_pin: touch-int {
+			pin {
+				pins = "gpio61";
+				function = "gpio";
+
+				drive-strength = <2>;
+				bias-disable;
+				input-enable;
+			};
+		};
+	};
+
+	dma-controller@f9944000 {
+		qcom,controlled-remotely;
 	};
 };
 
@@ -383,11 +429,6 @@
 		};
 
 		gpios@c000 {
-			boost_bypass_n_pin: boost-bypass {
-				pins = "gpio21";
-				function = "normal";
-			};
-
 			gpio_keys_pin_a: gpio-keys-active {
 				pins = "gpio2", "gpio3", "gpio4", "gpio5";
 				function = "normal";
diff --git a/src/arm/qcom-msm8974.dtsi b/src/arm/qcom-msm8974.dtsi
index 6f164266a010..49d579f28865 100644
--- a/src/arm/qcom-msm8974.dtsi
+++ b/src/arm/qcom-msm8974.dtsi
@@ -1,7 +1,8 @@
 /dts-v1/;
 
-#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
+#include <dt-bindings/gpio/gpio.h>
 #include "skeleton.dtsi"
 
 / {
@@ -131,19 +132,101 @@
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
 		interrupts = <1 7 0xf04>;
 	};
 
 	clocks {
-		xo_board {
+		xo_board: xo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <19200000>;
 		};
 
-		sleep_clk {
+		sleep_clk: sleep_clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
@@ -182,7 +265,7 @@
 
 		modem_smp2p_out: master-kernel {
 			qcom,entry-name = "master-kernel";
-			#qcom,state-cells = <1>;
+			#qcom,smem-state-cells = <1>;
 		};
 
 		modem_smp2p_in: slave-kernel {
@@ -208,7 +291,7 @@
 		wcnss_smp2p_out: master-kernel {
 			qcom,entry-name = "master-kernel";
 
-			#qcom,state-cells = <1>;
+			#qcom,smem-state-cells = <1>;
 		};
 
 		wcnss_smp2p_in: slave-kernel {
@@ -232,7 +315,7 @@
 		apps_smsm: apps@0 {
 			reg = <0>;
 
-			#qcom,state-cells = <1>;
+			#qcom,smem-state-cells = <1>;
 		};
 
 		modem_smsm: modem@1 {
@@ -260,6 +343,14 @@
 		};
 	};
 
+	firmware {
+		scm {
+			compatible = "qcom,scm";
+			clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -279,6 +370,27 @@
 			reg = <0xf9011000 0x1000>;
 		};
 
+		qfprom: qfprom@fc4bc000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "qcom,qfprom";
+			reg = <0xfc4bc000 0x1000>;
+			tsens_calib: calib@d0 {
+				reg = <0xd0 0x18>;
+			};
+			tsens_backup: backup@440 {
+				reg = <0x440 0x10>;
+			};
+		};
+
+		tsens: thermal-sensor@fc4a8000 {
+			compatible = "qcom,msm8974-tsens";
+			reg = <0xfc4a8000 0x2000>;
+			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+			nvmem-cell-names = "calib", "calib_backup";
+			#thermal-sensor-cells = <1>;
+		};
+
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -422,6 +534,15 @@
 			reg = <0xfc428000 0x4000>;
 		};
 
+		blsp1_uart1: serial@f991d000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991d000 0x1000>;
+			interrupts = <0 107 0x0>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		blsp1_uart2: serial@f991e000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf991e000 0x1000>;
@@ -437,8 +558,10 @@
 			reg-names = "hc_mem", "core_mem";
 			interrupts = <0 123 0>, <0 138 0>;
 			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
-			clock-names = "core", "iface";
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "core", "iface", "xo";
 			status = "disabled";
 		};
 
@@ -448,8 +571,10 @@
 			reg-names = "hc_mem", "core_mem";
 			interrupts = <0 125 0>, <0 221 0>;
 			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
-			clock-names = "core", "iface";
+			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "core", "iface", "xo";
 			status = "disabled";
 		};
 
@@ -501,6 +626,8 @@
 			clock-names = "core", "iface";
 			#address-cells = <1>;
 			#size-cells = <0>;
+			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
+			dma-names = "tx", "rx";
 		};
 
 		spmi_bus: spmi@fc4cf000 {
@@ -518,6 +645,16 @@
 			interrupt-controller;
 			#interrupt-cells = <4>;
 		};
+
+		blsp2_dma: dma-controller@f9944000 {
+			compatible = "qcom,bam-v1.4.0";
+			reg = <0xf9944000 0x19000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
 	};
 
 	smd {
@@ -595,4 +732,30 @@
 			};
 		};
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
diff --git a/src/arm/qcom-pm8941.dtsi b/src/arm/qcom-pm8941.dtsi
index d95edb6f6265..f8eb5e31c920 100644
--- a/src/arm/qcom-pm8941.dtsi
+++ b/src/arm/qcom-pm8941.dtsi
@@ -88,6 +88,11 @@
 				     <0 0xe1 0 IRQ_TYPE_NONE>,
 				     <0 0xe2 0 IRQ_TYPE_NONE>,
 				     <0 0xe3 0 IRQ_TYPE_NONE>;
+
+			boost_bypass_n_pin: boost-bypass {
+				pins = "gpio21";
+				function = "normal";
+			};
 		};
 
 		pm8941_mpps: mpps@a000 {
diff --git a/src/arm/qcom-pma8084.dtsi b/src/arm/qcom-pma8084.dtsi
index 4e9bd3f88473..82d258094156 100644
--- a/src/arm/qcom-pma8084.dtsi
+++ b/src/arm/qcom-pma8084.dtsi
@@ -12,15 +12,23 @@
 
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000 0x100>,
-			      <0x6100 0x100>;
+			reg = <0x6000>,
+			      <0x6100>;
 			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 		};
 
+		pwrkey@800 {
+			compatible = "qcom,pm8941-pwrkey";
+			reg = <0x800>;
+			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+			debounce = <15625>;
+			bias-pull-up;
+		};
+
 		pma8084_gpios: gpios@c000 {
 			compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
-			reg = <0xc000 0x1600>;
+			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
@@ -49,7 +57,7 @@
 
 		pma8084_mpps: mpps@a000 {
 			compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp";
-			reg = <0xa000 0x800>;
+			reg = <0xa000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
@@ -64,7 +72,7 @@
 
 		pma8084_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
-			reg = <0x2400 0x100>;
+			reg = <0x2400>;
 			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
 			#thermal-sensor-cells = <0>;
 			io-channels = <&pma8084_vadc VADC_DIE_TEMP>;
@@ -73,7 +81,7 @@
 
 		pma8084_vadc: vadc@3100 {
 			compatible = "qcom,spmi-vadc";
-			reg = <0x3100 0x100>;
+			reg = <0x3100>;
 			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/src/arm/r7s72100-genmai.dts b/src/arm/r7s72100-genmai.dts
index a9da7a89fc4b..118a8e2b86bd 100644
--- a/src/arm/r7s72100-genmai.dts
+++ b/src/arm/r7s72100-genmai.dts
@@ -17,15 +17,15 @@
 	compatible = "renesas,genmai", "renesas,r7s72100";
 
 	aliases {
-		serial2 = &scif2;
+		serial0 = &scif2;
 	};
 
 	chosen {
 		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
-		stdout-path = &scif2;
+		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@8000000 {
 		device_type = "memory";
 		reg = <0x08000000 0x08000000>;
 	};
diff --git a/src/arm/r7s72100-rskrza1.dts b/src/arm/r7s72100-rskrza1.dts
new file mode 100644
index 000000000000..dd4418195ca6
--- /dev/null
+++ b/src/arm/r7s72100-rskrza1.dts
@@ -0,0 +1,66 @@
+/*
+ * Device Tree Source for the RZ/A1H RSK board
+ *
+ * Copyright (C) 2016 Renesas Electronics
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r7s72100.dtsi"
+
+/ {
+	model = "RSKRZA1";
+	compatible = "renesas,rskrza1", "renesas,r7s72100";
+
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@8000000 {
+		device_type = "memory";
+		reg = <0x08000000 0x02000000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <13330000>;
+};
+
+&usb_x1_clk {
+	clock-frequency = <48000000>;
+};
+
+&mtu2 {
+	status = "okay";
+};
+
+&ether {
+	status = "okay";
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&sdhi1 {
+	bus-width = <4>;
+	status = "okay";
+};
+
+&scif2 {
+	status = "okay";
+};
diff --git a/src/arm/r7s72100.dtsi b/src/arm/r7s72100.dtsi
index e8e2a5d71976..3dd427d68c83 100644
--- a/src/arm/r7s72100.dtsi
+++ b/src/arm/r7s72100.dtsi
@@ -108,6 +108,24 @@
 			clock-output-names = "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scif6", "scif7";
 		};
 
+		mstp7_clks: mstp7_clks@fcfe0430 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0430 4>;
+			clocks = <&p0_clk>;
+			clock-indices = <R7S72100_CLK_ETHER>;
+			clock-output-names = "ether";
+		};
+
+		mstp8_clks: mstp8_clks@fcfe0434 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0434 4>;
+			clocks = <&p1_clk>;
+			clock-indices = <R7S72100_CLK_MMCIF>;
+			clock-output-names = "mmcif";
+		};
+
 		mstp9_clks: mstp9_clks@fcfe0438 {
 			#clock-cells = <1>;
 			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -131,6 +149,14 @@
 			>;
 			clock-output-names = "spi0", "spi1", "spi2", "spi3", "spi4";
 		};
+		mstp12_clks: mstp12_clks@fcfe0444 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0444 4>;
+			clocks = <&p1_clk>, <&p1_clk>;
+			clock-indices = <R7S72100_CLK_SDHI1 R7S72100_CLK_SDHI0>;
+			clock-output-names = "sdhi1", "sdhi0";
+		};
 	};
 
 	cpus {
@@ -419,4 +445,55 @@
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
+
+	ether: ethernet@e8203000 {
+		compatible = "renesas,ether-r7s72100";
+		reg = <0xe8203000 0x800>,
+		      <0xe8204800 0x200>;
+		interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R7S72100_CLK_ETHER>;
+		power-domains = <&cpg_clocks>;
+		phy-mode = "mii";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	mmcif: mmc@e804c800 {
+		compatible = "renesas,mmcif-r7s72100", "renesas,sh-mmcif";
+		reg = <0xe804c800 0x80>;
+		interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R7S72100_CLK_MMCIF>;
+		reg-io-width = <4>;
+		bus-width = <8>;
+		status = "disabled";
+	};
+
+	sdhi0: sd@e804e000 {
+		compatible = "renesas,sdhi-r7s72100";
+		reg = <0xe804e000 0x100>;
+		interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&mstp12_clks R7S72100_CLK_SDHI0>;
+		cap-sd-highspeed;
+		cap-sdio-irq;
+		status = "disabled";
+	};
+
+	sdhi1: sd@e804e800 {
+		compatible = "renesas,sdhi-r7s72100";
+		reg = <0xe804e800 0x100>;
+		interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&mstp12_clks R7S72100_CLK_SDHI1>;
+		cap-sd-highspeed;
+		cap-sdio-irq;
+		status = "disabled";
+	};
 };
diff --git a/src/arm/r8a73a4-ape6evm.dts b/src/arm/r8a73a4-ape6evm.dts
index 93ace33e3e36..ec7c86e06538 100644
--- a/src/arm/r8a73a4-ape6evm.dts
+++ b/src/arm/r8a73a4-ape6evm.dts
@@ -36,7 +36,7 @@
 		reg = <2 0x00000000 0 0x40000000>;
 	};
 
-	vcc_mmc0: regulator@0 {
+	vcc_mmc0: regulator-mmc0 {
 		compatible = "regulator-fixed";
 		regulator-name = "MMC0 Vcc";
 		regulator-min-microvolt = <2800000>;
@@ -44,7 +44,7 @@
 		regulator-always-on;
 	};
 
-	vcc_sdhi0: regulator@1 {
+	vcc_sdhi0: regulator-sdhi0 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI0 Vcc";
@@ -56,7 +56,7 @@
 	};
 
 	/* Common 1.8V and 3.3V rails, used by several devices on APE6EVM */
-	ape6evm_fixed_1v8: regulator@2 {
+	ape6evm_fixed_1v8: regulator-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "1V8";
 		regulator-min-microvolt = <1800000>;
@@ -64,7 +64,7 @@
 		regulator-always-on;
 	};
 
-	ape6evm_fixed_3v3: regulator@3 {
+	ape6evm_fixed_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "3V3";
 		regulator-min-microvolt = <3300000>;
@@ -188,12 +188,12 @@
 };
 
 &pfc {
-	scifa0_pins: serial0 {
+	scifa0_pins: scifa0 {
 		groups = "scifa0_data";
 		function = "scifa0";
 	};
 
-	mmc0_pins: mmc {
+	mmc0_pins: mmc0 {
 		groups = "mmc0_data8", "mmc0_ctrl";
 		function = "mmc0";
 	};
diff --git a/src/arm/r8a73a4.dtsi b/src/arm/r8a73a4.dtsi
index 6954912a3753..53183ffe04c1 100644
--- a/src/arm/r8a73a4.dtsi
+++ b/src/arm/r8a73a4.dtsi
@@ -31,6 +31,24 @@
 			power-domains = <&pd_a2sl>;
 			next-level-cache = <&L2_CA15>;
 		};
+
+		L2_CA15: cache-controller@0 {
+			compatible = "cache";
+			reg = <0>;
+			clocks = <&cpg_clocks R8A73A4_CLK_Z>;
+			power-domains = <&pd_a3sm>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA7: cache-controller@100 {
+			compatible = "cache";
+			reg = <0x100>;
+			clocks = <&cpg_clocks R8A73A4_CLK_Z2>;
+			power-domains = <&pd_a3km>;
+			cache-unified;
+			cache-level = <2>;
+		};
 	};
 
 	ptm {
@@ -46,22 +64,6 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
-	L2_CA15: cache-controller@0 {
-		compatible = "cache";
-		clocks = <&cpg_clocks R8A73A4_CLK_Z>;
-		power-domains = <&pd_a3sm>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	L2_CA7: cache-controller@1 {
-		compatible = "cache";
-		clocks = <&cpg_clocks R8A73A4_CLK_Z2>;
-		power-domains = <&pd_a3km>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
 	dbsc1: memory-controller@e6790000 {
 		compatible = "renesas,dbsc-r8a73a4";
 		reg = <0 0xe6790000 0 0x10000>;
@@ -749,6 +751,11 @@
 		};
 	};
 
+	prr: chipid@ff000044 {
+		compatible = "renesas,prr";
+		reg = <0 0xff000044 0 4>;
+	};
+
 	sysc: system-controller@e6180000 {
 		compatible = "renesas,sysc-r8a73a4", "renesas,sysc-rmobile";
 		reg = <0 0xe6180000 0 0x8000>, <0 0xe6188000 0 0x8000>;
diff --git a/src/arm/r8a7740-armadillo800eva.dts b/src/arm/r8a7740-armadillo800eva.dts
index 2c82dab2b6f4..7885075428bb 100644
--- a/src/arm/r8a7740-armadillo800eva.dts
+++ b/src/arm/r8a7740-armadillo800eva.dts
@@ -20,20 +20,20 @@
 	compatible = "renesas,armadillo800eva", "renesas,r8a7740";
 
 	aliases {
-		serial1 = &scifa1;
+		serial0 = &scifa1;
 	};
 
 	chosen {
-		bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
-		stdout-path = &scifa1;
+		bootargs = "earlyprintk ignore_loglevel root=/dev/nfs ip=dhcp rw";
+		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x20000000>;
 	};
 
-	reg_3p3v: regulator@0 {
+	reg_3p3v: regulator-3p3v {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -42,7 +42,7 @@
 		regulator-boot-on;
 	};
 
-	vcc_sdhi0: regulator@1 {
+	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI0 Vcc";
@@ -53,7 +53,7 @@
 		enable-active-high;
 	};
 
-	vccq_sdhi0: regulator@2 {
+	vccq_sdhi0: regulator-vccq-sdhi0 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI0 VccQ";
@@ -69,7 +69,7 @@
 		enable-active-high;
 	};
 
-	reg_5p0v: regulator@3 {
+	reg_5p0v: regulator-5p0v {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-5.0V";
 		regulator-min-microvolt = <5000000>;
@@ -127,7 +127,7 @@
 		};
 	};
 
-	i2c2: i2c@2 {
+	i2c2: i2c-2 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
@@ -232,7 +232,7 @@
 		function = "gether";
 	};
 
-	scifa1_pins: serial1 {
+	scifa1_pins: scifa1 {
 		groups = "scifa1_data";
 		function = "scifa1";
 	};
diff --git a/src/arm/r8a7740.dtsi b/src/arm/r8a7740.dtsi
index 39b2f88ad151..34159a8349de 100644
--- a/src/arm/r8a7740.dtsi
+++ b/src/arm/r8a7740.dtsi
@@ -8,8 +8,6 @@
  * kind, whether express or implied.
  */
 
-/include/ "skeleton.dtsi"
-
 #include <dt-bindings/clock/r8a7740-clock.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -17,6 +15,8 @@
 / {
 	compatible = "renesas,r8a7740";
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	cpus {
 		#address-cells = <1>;
@@ -39,7 +39,7 @@
 		      <0xc2000000 0x1000>;
 	};
 
-	L2: cache-controller {
+	L2: cache-controller@f0100000 {
 		compatible = "arm,pl310-cache";
 		reg = <0xf0100000 0x1000>;
 		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/src/arm/r8a7743-sk-rzg1m.dts b/src/arm/r8a7743-sk-rzg1m.dts
new file mode 100644
index 000000000000..3a22538208f2
--- /dev/null
+++ b/src/arm/r8a7743-sk-rzg1m.dts
@@ -0,0 +1,57 @@
+/*
+ * Device Tree Source for the SK-RZG1M board
+ *
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7743.dtsi"
+
+/ {
+	model = "SK-RZG1M";
+	compatible = "renesas,sk-rzg1m", "renesas,r8a7743";
+
+	aliases {
+		serial0 = &scif0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory@200000000 {
+		device_type = "memory";
+		reg = <2 0x00000000 0 0x40000000>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&scif0 {
+	status = "okay";
+};
+
+&ether {
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
diff --git a/src/arm/r8a7743.dtsi b/src/arm/r8a7743.dtsi
new file mode 100644
index 000000000000..216cb1f37f87
--- /dev/null
+++ b/src/arm/r8a7743.dtsi
@@ -0,0 +1,476 @@
+/*
+ * Device Tree Source for the r8a7743 SoC
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a7743-cpg-mssr.h>
+#include <dt-bindings/power/r8a7743-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7743";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1500000000>;
+			clocks = <&cpg CPG_CORE R8A7743_CLK_Z>;
+			power-domains = <&sysc R8A7743_PD_CA15_CPU0>;
+			next-level-cache = <&L2_CA15>;
+		};
+
+		L2_CA15: cache-controller@0 {
+			compatible = "cache";
+			reg = <0>;
+			cache-unified;
+			cache-level = <2>;
+			power-domains = <&sysc R8A7743_PD_CA15_SCU>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>,
+			      <0 0xf1002000 0 0x1000>,
+			      <0 0xf1004000 0 0x2000>,
+			      <0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		irqc: interrupt-controller@e61c0000 {
+			compatible = "renesas,irqc-r8a7743", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+		};
+
+		timer {
+			compatible = "arm,armv7-timer";
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7743-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&usb_extal_clk>;
+			clock-names = "extal", "usb_extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7743-sysc";
+			reg = <0 0xe6180000 0 0x200>;
+			#power-domain-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7743-rst";
+			reg = <0 0xe6160000 0 0x100>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7743",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x20000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		dmac1: dma-controller@e6720000 {
+			compatible = "renesas,dmac-r8a7743",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6720000 0 0x20000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		scifa0: serial@e6c40000 {
+			compatible = "renesas,scifa-r8a7743",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+			       <&dmac1 0x21>, <&dmac1 0x22>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifa1: serial@e6c50000 {
+			compatible = "renesas,scifa-r8a7743",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+			       <&dmac1 0x25>, <&dmac1 0x26>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifa2: serial@e6c60000 {
+			compatible = "renesas,scifa-r8a7743",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c60000 0 0x40>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+			       <&dmac1 0x27>, <&dmac1 0x28>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifa3: serial@e6c70000 {
+			compatible = "renesas,scifa-r8a7743",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c70000 0 0x40>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1106>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+			       <&dmac1 0x1b>, <&dmac1 0x1c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifa4: serial@e6c78000 {
+			compatible = "renesas,scifa-r8a7743",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c78000 0 0x40>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1107>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+			       <&dmac1 0x1f>, <&dmac1 0x20>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifa5: serial@e6c80000 {
+			compatible = "renesas,scifa-r8a7743",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c80000 0 0x40>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1108>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+			       <&dmac1 0x23>, <&dmac1 0x24>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifb0: serial@e6c20000 {
+			compatible = "renesas,scifb-r8a7743",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c20000 0 0x100>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+		       <&dmac1 0x3d>, <&dmac1 0x3e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifb1: serial@e6c30000 {
+			compatible = "renesas,scifb-r8a7743",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c30000 0 0x100>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+			       <&dmac1 0x19>, <&dmac1 0x1a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifb2: serial@e6ce0000 {
+			compatible = "renesas,scifb-r8a7743",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6ce0000 0 0x100>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 216>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+			       <&dmac1 0x1d>, <&dmac1 0x1e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7743",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 721>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7743",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 720>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e58000 {
+			compatible = "renesas,scif-r8a7743",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e58000 0 0x40>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 719>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6ea8000 {
+			compatible = "renesas,scif-r8a7743",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ea8000 0 0x40>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 718>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+			       <&dmac1 0x2f>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6ee0000 {
+			compatible = "renesas,scif-r8a7743",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee0000 0 0x40>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+			       <&dmac1 0xfb>, <&dmac1 0xfc>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6ee8000 {
+			compatible = "renesas,scif-r8a7743",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee8000 0 0x40>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+			       <&dmac1 0xfd>, <&dmac1 0xfe>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a7743",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a7743",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e62d0000 {
+			compatible = "renesas,hscif-r8a7743",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62d0000 0 0x60>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 713>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+			       <&dmac1 0x3b>, <&dmac1 0x3c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		ether: ethernet@ee700000 {
+			compatible = "renesas,ether-r8a7743";
+			reg = <0 0xee700000 0 0x400>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			phy-mode = "rmii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	/* External USB clock - can be overridden by the board */
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+};
diff --git a/src/arm/r8a7745-sk-rzg1e.dts b/src/arm/r8a7745-sk-rzg1e.dts
new file mode 100644
index 000000000000..97840b340197
--- /dev/null
+++ b/src/arm/r8a7745-sk-rzg1e.dts
@@ -0,0 +1,52 @@
+/*
+ * Device Tree Source for the SK-RZG1E board
+ *
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7745.dtsi"
+
+/ {
+	model = "SK-RZG1E";
+	compatible = "renesas,sk-rzg1e", "renesas,r8a7745";
+
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&scif2 {
+	status = "okay";
+};
+
+&ether {
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
diff --git a/src/arm/r8a7745.dtsi b/src/arm/r8a7745.dtsi
new file mode 100644
index 000000000000..0b2e2f37150f
--- /dev/null
+++ b/src/arm/r8a7745.dtsi
@@ -0,0 +1,476 @@
+/*
+ * Device Tree Source for the r8a7745 SoC
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a7745-cpg-mssr.h>
+#include <dt-bindings/power/r8a7745-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7745";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+			clocks = <&cpg CPG_CORE R8A7745_CLK_Z2>;
+			power-domains = <&sysc R8A7745_PD_CA7_CPU0>;
+			next-level-cache = <&L2_CA7>;
+		};
+
+		L2_CA7: cache-controller@0 {
+			compatible = "cache";
+			reg = <0>;
+			cache-unified;
+			cache-level = <2>;
+			power-domains = <&sysc R8A7745_PD_CA7_SCU>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>,
+			      <0 0xf1002000 0 0x1000>,
+			      <0 0xf1004000 0 0x2000>,
+			      <0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		irqc: interrupt-controller@e61c0000 {
+			compatible = "renesas,irqc-r8a7745", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+		};
+
+		timer {
+			compatible = "arm,armv7-timer";
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7745-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&usb_extal_clk>;
+			clock-names = "extal", "usb_extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7745-sysc";
+			reg = <0 0xe6180000 0 0x200>;
+			#power-domain-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7745-rst";
+			reg = <0 0xe6160000 0 0x100>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7745",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x20000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		dmac1: dma-controller@e6720000 {
+			compatible = "renesas,dmac-r8a7745",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6720000 0 0x20000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		scifa0: serial@e6c40000 {
+			compatible = "renesas,scifa-r8a7745",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+			       <&dmac1 0x21>, <&dmac1 0x22>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifa1: serial@e6c50000 {
+			compatible = "renesas,scifa-r8a7745",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+			       <&dmac1 0x25>, <&dmac1 0x26>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifa2: serial@e6c60000 {
+			compatible = "renesas,scifa-r8a7745",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c60000 0 0x40>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+			       <&dmac1 0x27>, <&dmac1 0x28>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifa3: serial@e6c70000 {
+			compatible = "renesas,scifa-r8a7745",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c70000 0 0x40>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1106>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+			       <&dmac1 0x1b>, <&dmac1 0x1c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifa4: serial@e6c78000 {
+			compatible = "renesas,scifa-r8a7745",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c78000 0 0x40>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1107>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+			       <&dmac1 0x1f>, <&dmac1 0x20>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifa5: serial@e6c80000 {
+			compatible = "renesas,scifa-r8a7745",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c80000 0 0x40>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1108>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+			       <&dmac1 0x23>, <&dmac1 0x24>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifb0: serial@e6c20000 {
+			compatible = "renesas,scifb-r8a7745",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c20000 0 0x100>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+		       <&dmac1 0x3d>, <&dmac1 0x3e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifb1: serial@e6c30000 {
+			compatible = "renesas,scifb-r8a7745",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c30000 0 0x100>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+			       <&dmac1 0x19>, <&dmac1 0x1a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scifb2: serial@e6ce0000 {
+			compatible = "renesas,scifb-r8a7745",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6ce0000 0 0x100>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 216>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+			       <&dmac1 0x1d>, <&dmac1 0x1e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7745",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 721>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7745",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 720>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e58000 {
+			compatible = "renesas,scif-r8a7745",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e58000 0 0x40>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 719>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6ea8000 {
+			compatible = "renesas,scif-r8a7745",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ea8000 0 0x40>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 718>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+			       <&dmac1 0x2f>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6ee0000 {
+			compatible = "renesas,scif-r8a7745",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee0000 0 0x40>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+			       <&dmac1 0xfb>, <&dmac1 0xfc>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6ee8000 {
+			compatible = "renesas,scif-r8a7745",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee8000 0 0x40>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+			       <&dmac1 0xfd>, <&dmac1 0xfe>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a7745",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a7745",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e62d0000 {
+			compatible = "renesas,hscif-r8a7745",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62d0000 0 0x60>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 713>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+			       <&dmac1 0x3b>, <&dmac1 0x3c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		ether: ethernet@ee700000 {
+			compatible = "renesas,ether-r8a7745";
+			reg = <0 0xee700000 0 0x400>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			phy-mode = "rmii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	/* External USB clock - can be overridden by the board */
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+};
diff --git a/src/arm/r8a7778-bockw.dts b/src/arm/r8a7778-bockw.dts
index e0dab1464648..211d239d9041 100644
--- a/src/arm/r8a7778-bockw.dts
+++ b/src/arm/r8a7778-bockw.dts
@@ -32,12 +32,12 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x10000000>;
 	};
 
-	fixedregulator3v3: fixedregulator@0 {
+	fixedregulator3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -129,7 +129,7 @@
 	pinctrl-0 = <&scif_clk_pins>;
 	pinctrl-names = "default";
 
-	scif0_pins: serial0 {
+	scif0_pins: scif0 {
 		groups = "scif0_data_a", "scif0_ctrl";
 		function = "scif0";
 	};
@@ -223,6 +223,7 @@
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
 
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/src/arm/r8a7778.dtsi b/src/arm/r8a7778.dtsi
index fe787b4751d2..d0db998effc8 100644
--- a/src/arm/r8a7778.dtsi
+++ b/src/arm/r8a7778.dtsi
@@ -14,8 +14,6 @@
  * kind, whether express or implied.
  */
 
-/include/ "skeleton.dtsi"
-
 #include <dt-bindings/clock/r8a7778-clock.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -23,6 +21,8 @@
 / {
 	compatible = "renesas,r8a7778";
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	cpus {
 		#address-cells = <1>;
@@ -276,23 +276,23 @@
 		status = "disabled";
 
 		rcar_sound,src {
-			src3: src@3 { };
-			src4: src@4 { };
-			src5: src@5 { };
-			src6: src@6 { };
-			src7: src@7 { };
-			src8: src@8 { };
-			src9: src@9 { };
+			src3: src-3 { };
+			src4: src-4 { };
+			src5: src-5 { };
+			src6: src-6 { };
+			src7: src-7 { };
+			src8: src-8 { };
+			src9: src-9 { };
 		};
 
 		rcar_sound,ssi {
-			ssi3: ssi@3 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi4: ssi@4 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi5: ssi@5 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi6: ssi@6 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi7: ssi@7 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi8: ssi@8 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi9: ssi@9 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi3: ssi-3 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi4: ssi-4 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi5: ssi-5 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi6: ssi-6 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi7: ssi-7 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi8: ssi-8 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi9: ssi-9 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
 		};
 	};
 
@@ -626,4 +626,9 @@
 				"sru-src6", "sru-src7", "sru-src8";
 		};
 	};
+
+	rst: reset-controller@ffcc0000 {
+		compatible = "renesas,r8a7778-reset-wdt";
+		reg = <0xffcc0000 0x40>;
+	};
 };
diff --git a/src/arm/r8a7779-marzen.dts b/src/arm/r8a7779-marzen.dts
index b795da6f5503..676151b70185 100644
--- a/src/arm/r8a7779-marzen.dts
+++ b/src/arm/r8a7779-marzen.dts
@@ -25,15 +25,15 @@
 
 	chosen {
 		bootargs = "ignore_loglevel root=/dev/nfs ip=on";
-		stdout-path = &scif2;
+		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
 	};
 
-	fixedregulator3v3: fixedregulator@0 {
+	fixedregulator3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -170,7 +170,7 @@
 
 	du_pins: du {
 		du0 {
-			groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0";
+			groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0", "du0_clk_in";
 			function = "du0";
 		};
 		du1 {
@@ -195,12 +195,12 @@
 		};
 	};
 
-	scif2_pins: serial2 {
+	scif2_pins: scif2 {
 		groups = "scif2_data_c";
 		function = "scif2";
 	};
 
-	scif4_pins: serial4 {
+	scif4_pins: scif4 {
 		groups = "scif4_data";
 		function = "scif4";
 	};
diff --git a/src/arm/r8a7779.dtsi b/src/arm/r8a7779.dtsi
index b9bbcce69dfb..55a7c1e37c57 100644
--- a/src/arm/r8a7779.dtsi
+++ b/src/arm/r8a7779.dtsi
@@ -9,8 +9,6 @@
  * kind, whether express or implied.
  */
 
-/include/ "skeleton.dtsi"
-
 #include <dt-bindings/clock/r8a7779-clock.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -19,6 +17,8 @@
 / {
 	compatible = "renesas,r8a7779";
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	cpus {
 		#address-cells = <1>;
@@ -420,7 +420,7 @@
 
 	du: display@fff80000 {
 		compatible = "renesas,du-r8a7779";
-		reg = <0 0xfff80000 0 0x40000>;
+		reg = <0xfff80000 0x40000>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7779_CLK_DU>;
 		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
@@ -590,6 +590,16 @@
 		};
 	};
 
+	prr: chipid@ff000044 {
+		compatible = "renesas,prr";
+		reg = <0xff000044 4>;
+	};
+
+	rst: reset-controller@ffcc0000 {
+		compatible = "renesas,r8a7779-reset-wdt";
+		reg = <0xffcc0000 0x48>;
+	};
+
 	sysc: system-controller@ffd85000 {
 		compatible = "renesas,r8a7779-sysc";
 		reg = <0xffd85000 0x0200>;
diff --git a/src/arm/r8a7790-lager.dts b/src/arm/r8a7790-lager.dts
index 749ba02b6a53..bd512c86e852 100644
--- a/src/arm/r8a7790-lager.dts
+++ b/src/arm/r8a7790-lager.dts
@@ -50,7 +50,9 @@
 	aliases {
 		serial0 = &scif0;
 		serial1 = &scifa1;
-		i2c8 = "i2cexio";
+		i2c8 = &gpioi2c1;
+		i2c10 = &i2cexio0;
+		i2c11 = &i2cexio1;
 	};
 
 	chosen {
@@ -76,28 +78,28 @@
 	keyboard {
 		compatible = "gpio-keys";
 
-		button@1 {
+		one {
 			linux,code = <KEY_1>;
 			label = "SW2-1";
 			wakeup-source;
 			debounce-interval = <20>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
-		button@2 {
+		two {
 			linux,code = <KEY_2>;
 			label = "SW2-2";
 			wakeup-source;
 			debounce-interval = <20>;
 			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 		};
-		button@3 {
+		three {
 			linux,code = <KEY_3>;
 			label = "SW2-3";
 			wakeup-source;
 			debounce-interval = <20>;
 			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
 		};
-		button@4 {
+		four {
 			linux,code = <KEY_4>;
 			label = "SW2-4";
 			wakeup-source;
@@ -119,7 +121,7 @@
 		};
 	};
 
-	fixedregulator3v3: fixedregulator@0 {
+	fixedregulator3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -128,7 +130,7 @@
 		regulator-always-on;
 	};
 
-	vcc_sdhi0: regulator@1 {
+	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI0 Vcc";
@@ -139,7 +141,7 @@
 		enable-active-high;
 	};
 
-	vccq_sdhi0: regulator@2 {
+	vccq_sdhi0: regulator-vccq-sdhi0 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI0 VccQ";
@@ -152,7 +154,7 @@
 			  1800000 0>;
 	};
 
-	vcc_sdhi2: regulator@3 {
+	vcc_sdhi2: regulator-vcc-sdhi2 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI2 Vcc";
@@ -163,7 +165,7 @@
 		enable-active-high;
 	};
 
-	vccq_sdhi2: regulator@4 {
+	vccq_sdhi2: regulator-vccq-sdhi2 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI2 VccQ";
@@ -231,12 +233,23 @@
 		};
 	};
 
+	hdmi-in {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&adv7612_in>;
+			};
+		};
+	};
+
 	hdmi-out {
 		compatible = "hdmi-connector";
 		type = "a";
 
 		port {
-			hdmi_con: endpoint {
+			hdmi_con_out: endpoint {
 				remote-endpoint = <&adv7511_out>;
 			};
 		};
@@ -254,6 +267,17 @@
 		clock-frequency = <148500000>;
 	};
 
+	gpioi2c1: i2c-8 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		gpios = <&gpio1 17 GPIO_ACTIVE_HIGH /* sda */
+			 &gpio1 16 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,delay-us = <5>;
+	};
+
 	/*
 	 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only.
 	 * We use the I2C demuxer, so the desired IP core can be selected at runtime
@@ -262,11 +286,26 @@
 	 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and
 	 * instantiate the slave device at runtime according to the documentation.
 	 * You can then communicate with the slave via IIC3.
+	 *
+	 * IIC0/I2C0 does not appear to support fallback to GPIO.
 	 */
-	i2cexio: i2c@8 {
+	i2cexio0: i2c-10 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&iic0>, <&i2c0>;
-		i2c-bus-name = "i2c-exio";
+		i2c-bus-name = "i2c-exio0";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	/*
+	 * IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA).
+	 * This is similar to the arangement described for i2cexio0 (above)
+	 * with a fallback to GPIO also provided.
+	 */
+	i2cexio1: i2c-11 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
+		i2c-bus-name = "i2c-exio1";
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
@@ -317,7 +356,7 @@
 		function = "du";
 	};
 
-	scif0_pins: serial0 {
+	scif0_pins: scif0 {
 		groups = "scif0_data";
 		function = "scif0";
 	};
@@ -337,7 +376,7 @@
 		function = "intc";
 	};
 
-	scifa1_pins: serial1 {
+	scifa1_pins: scifa1 {
 		groups = "scifa1_data";
 		function = "scifa1";
 	};
@@ -371,12 +410,12 @@
 		function = "mmc1";
 	};
 
-	qspi_pins: spi0 {
+	qspi_pins: qspi {
 		groups = "qspi_ctrl", "qspi_data4";
 		function = "qspi";
 	};
 
-	msiof1_pins: spi2 {
+	msiof1_pins: msiof1 {
 		groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
 				 "msiof1_tx";
 		function = "msiof1";
@@ -392,6 +431,11 @@
 		function = "iic0";
 	};
 
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
 	iic1_pins: iic1 {
 		groups = "iic1";
 		function = "iic1";
@@ -427,7 +471,12 @@
 		function = "usb2";
 	};
 
-	vin1_pins: vin {
+	vin0_pins: vin0 {
+		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
+		function = "vin0";
+	};
+
+	vin1_pins: vin1 {
 		groups = "vin1_data8", "vin1_clk";
 		function = "vin1";
 	};
@@ -559,6 +608,7 @@
 	vqmmc-supply = <&vccq_sdhi0>;
 	cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
 	sd-uhs-sdr50;
+	sd-uhs-sdr104;
 	status = "okay";
 };
 
@@ -580,18 +630,22 @@
 
 &i2c0	{
 	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "i2c-exio";
+	pinctrl-names = "i2c-exio0";
 };
 
 &iic0	{
 	pinctrl-0 = <&iic0_pins>;
-	pinctrl-names = "i2c-exio";
+	pinctrl-names = "i2c-exio0";
+};
+
+&i2c1	{
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "i2c-exio1";
 };
 
 &iic1	{
-	status = "okay";
 	pinctrl-0 = <&iic1_pins>;
-	pinctrl-names = "default";
+	pinctrl-names = "i2c-exio1";
 };
 
 &iic2	{
@@ -646,7 +700,34 @@
 			port@1 {
 				reg = <1>;
 				adv7511_out: endpoint {
-					remote-endpoint = <&hdmi_con>;
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+
+	hdmi-in@4c {
+		compatible = "adi,adv7612";
+		reg = <0x4c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		default-input = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7612_in: endpoint {
+					remote-endpoint = <&hdmi_con_in>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				adv7612_out: endpoint {
+					remote-endpoint = <&vin0ep2>;
 				};
 			};
 		};
@@ -722,6 +803,25 @@
 	status = "okay";
 };
 
+/* HDMI video input */
+&vin0 {
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	port {
+		vin0ep2: endpoint {
+			remote-endpoint = <&adv7612_out>;
+			bus-width = <24>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <1>;
+			data-active = <1>;
+		};
+	};
+};
+
 /* composite video input */
 &vin1 {
 	pinctrl-0 = <&vin1_pins>;
diff --git a/src/arm/r8a7790.dtsi b/src/arm/r8a7790.dtsi
index 83cf23cd26bb..0c8900d4b824 100644
--- a/src/arm/r8a7790.dtsi
+++ b/src/arm/r8a7790.dtsi
@@ -44,6 +44,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "renesas,apmu";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -92,7 +93,7 @@
 			next-level-cache = <&L2_CA15>;
 		};
 
-		cpu4: cpu@4 {
+		cpu4: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x100>;
@@ -101,7 +102,7 @@
 			next-level-cache = <&L2_CA7>;
 		};
 
-		cpu5: cpu@5 {
+		cpu5: cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x101>;
@@ -110,7 +111,7 @@
 			next-level-cache = <&L2_CA7>;
 		};
 
-		cpu6: cpu@6 {
+		cpu6: cpu@102 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x102>;
@@ -119,7 +120,7 @@
 			next-level-cache = <&L2_CA7>;
 		};
 
-		cpu7: cpu@7 {
+		cpu7: cpu@103 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x103>;
@@ -127,6 +128,22 @@
 			power-domains = <&sysc R8A7790_PD_CA7_CPU3>;
 			next-level-cache = <&L2_CA7>;
 		};
+
+		L2_CA15: cache-controller@0 {
+			compatible = "cache";
+			reg = <0>;
+			power-domains = <&sysc R8A7790_PD_CA15_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA7: cache-controller@100 {
+			compatible = "cache";
+			reg = <0x100>;
+			power-domains = <&sysc R8A7790_PD_CA7_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
 	};
 
 	thermal-zones {
@@ -148,18 +165,16 @@
 		};
 	};
 
-	L2_CA15: cache-controller@0 {
-		compatible = "cache";
-		power-domains = <&sysc R8A7790_PD_CA15_SCU>;
-		cache-unified;
-		cache-level = <2>;
+	apmu@e6151000 {
+		compatible = "renesas,r8a7790-apmu", "renesas,apmu";
+		reg = <0 0xe6151000 0 0x188>;
+		cpus = <&cpu4 &cpu5 &cpu6 &cpu7>;
 	};
 
-	L2_CA7: cache-controller@1 {
-		compatible = "cache";
-		power-domains = <&sysc R8A7790_PD_CA7_SCU>;
-		cache-unified;
-		cache-level = <2>;
+	apmu@e6152000 {
+		compatible = "renesas,r8a7790-apmu", "renesas,apmu";
+		reg = <0 0xe6152000 0 0x188>;
+		cpus = <&cpu0 &cpu1 &cpu2 &cpu3>;
 	};
 
 	gic: interrupt-controller@f1001000 {
@@ -517,8 +532,9 @@
 		reg = <0 0xe6500000 0 0x425>;
 		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
-		dmas = <&dmac0 0x61>, <&dmac0 0x62>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+		       <&dmac1 0x61>, <&dmac1 0x62>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -530,8 +546,9 @@
 		reg = <0 0xe6510000 0 0x425>;
 		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
-		dmas = <&dmac0 0x65>, <&dmac0 0x66>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+		       <&dmac1 0x65>, <&dmac1 0x66>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -543,8 +560,9 @@
 		reg = <0 0xe6520000 0 0x425>;
 		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
-		dmas = <&dmac0 0x69>, <&dmac0 0x6a>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x69>, <&dmac0 0x6a>,
+		       <&dmac1 0x69>, <&dmac1 0x6a>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -556,8 +574,9 @@
 		reg = <0 0xe60b0000 0 0x425>;
 		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
-		dmas = <&dmac0 0x77>, <&dmac0 0x78>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+		       <&dmac1 0x77>, <&dmac1 0x78>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -567,8 +586,9 @@
 		reg = <0 0xee200000 0 0x80>;
 		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
-		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+		       <&dmac1 0xd1>, <&dmac1 0xd2>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		reg-io-width = <4>;
 		status = "disabled";
@@ -580,8 +600,9 @@
 		reg = <0 0xee220000 0 0x80>;
 		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
-		dmas = <&dmac0 0xe1>, <&dmac0 0xe2>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xe1>, <&dmac0 0xe2>,
+		       <&dmac1 0xe1>, <&dmac1 0xe2>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		reg-io-width = <4>;
 		status = "disabled";
@@ -598,8 +619,9 @@
 		reg = <0 0xee100000 0 0x328>;
 		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
-		dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+		       <&dmac1 0xcd>, <&dmac1 0xce>;
+		dma-names = "tx", "rx", "tx", "rx";
 		max-frequency = <195000000>;
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
@@ -610,8 +632,9 @@
 		reg = <0 0xee120000 0 0x328>;
 		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
-		dmas = <&dmac1 0xc9>, <&dmac1 0xca>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xc9>, <&dmac0 0xca>,
+		       <&dmac1 0xc9>, <&dmac1 0xca>;
+		dma-names = "tx", "rx", "tx", "rx";
 		max-frequency = <195000000>;
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
@@ -622,8 +645,9 @@
 		reg = <0 0xee140000 0 0x100>;
 		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
-		dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+		       <&dmac1 0xc1>, <&dmac1 0xc2>;
+		dma-names = "tx", "rx", "tx", "rx";
 		max-frequency = <97500000>;
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
@@ -634,8 +658,9 @@
 		reg = <0 0xee160000 0 0x100>;
 		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
-		dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+		       <&dmac1 0xd3>, <&dmac1 0xd4>;
+		dma-names = "tx", "rx", "tx", "rx";
 		max-frequency = <97500000>;
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
@@ -648,8 +673,9 @@
 		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x21>, <&dmac0 0x22>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+		       <&dmac1 0x21>, <&dmac1 0x22>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -661,8 +687,9 @@
 		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x25>, <&dmac0 0x26>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+		       <&dmac1 0x25>, <&dmac1 0x26>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -674,8 +701,9 @@
 		interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x27>, <&dmac0 0x28>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+		       <&dmac1 0x27>, <&dmac1 0x28>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -683,12 +711,13 @@
 	scifb0: serial@e6c20000 {
 		compatible = "renesas,scifb-r8a7790",
 			     "renesas,rcar-gen2-scifb", "renesas,scifb";
-		reg = <0 0xe6c20000 0 64>;
+		reg = <0 0xe6c20000 0 0x100>;
 		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+		       <&dmac1 0x3d>, <&dmac1 0x3e>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -696,12 +725,13 @@
 	scifb1: serial@e6c30000 {
 		compatible = "renesas,scifb-r8a7790",
 			     "renesas,rcar-gen2-scifb", "renesas,scifb";
-		reg = <0 0xe6c30000 0 64>;
+		reg = <0 0xe6c30000 0 0x100>;
 		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+		       <&dmac1 0x19>, <&dmac1 0x1a>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -709,12 +739,13 @@
 	scifb2: serial@e6ce0000 {
 		compatible = "renesas,scifb-r8a7790",
 			     "renesas,rcar-gen2-scifb", "renesas,scifb";
-		reg = <0 0xe6ce0000 0 64>;
+		reg = <0 0xe6ce0000 0 0x100>;
 		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+		       <&dmac1 0x1d>, <&dmac1 0x1e>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -727,8 +758,9 @@
 		clocks = <&mstp7_clks R8A7790_CLK_SCIF0>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+		       <&dmac1 0x29>, <&dmac1 0x2a>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -741,8 +773,9 @@
 		clocks = <&mstp7_clks R8A7790_CLK_SCIF1>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+		       <&dmac1 0x2d>, <&dmac1 0x2e>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -755,8 +788,9 @@
 		clocks = <&mstp3_clks R8A7790_CLK_SCIF2>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+		       <&dmac1 0x2b>, <&dmac1 0x2c>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -769,8 +803,9 @@
 		clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+		       <&dmac1 0x39>, <&dmac1 0x3a>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -783,8 +818,9 @@
 		clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+		       <&dmac1 0x4d>, <&dmac1 0x4e>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -908,11 +944,6 @@
 		interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>;
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-
-		renesas,has-sru;
-		renesas,#rpf = <5>;
-		renesas,#uds = <1>;
-		renesas,#wpf = <4>;
 	};
 
 	vsp1@fe928000 {
@@ -921,12 +952,6 @@
 		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-
-		renesas,has-lut;
-		renesas,has-sru;
-		renesas,#rpf = <5>;
-		renesas,#uds = <3>;
-		renesas,#wpf = <4>;
 	};
 
 	vsp1@fe930000 {
@@ -935,12 +960,6 @@
 		interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>;
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-
-		renesas,has-lif;
-		renesas,has-lut;
-		renesas,#rpf = <4>;
-		renesas,#uds = <1>;
-		renesas,#wpf = <4>;
 	};
 
 	vsp1@fe938000 {
@@ -949,12 +968,6 @@
 		interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>;
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-
-		renesas,has-lif;
-		renesas,has-lut;
-		renesas,#rpf = <4>;
-		renesas,#uds = <1>;
-		renesas,#wpf = <4>;
 	};
 
 	du: display@feb00000 {
@@ -1458,6 +1471,16 @@
 		};
 	};
 
+	prr: chipid@ff000044 {
+		compatible = "renesas,prr";
+		reg = <0 0xff000044 0 4>;
+	};
+
+	rst: reset-controller@e6160000 {
+		compatible = "renesas,r8a7790-rst";
+		reg = <0 0xe6160000 0 0x0100>;
+	};
+
 	sysc: system-controller@e6180000 {
 		compatible = "renesas,r8a7790-sysc";
 		reg = <0 0xe6180000 0 0x0200>;
@@ -1469,8 +1492,9 @@
 		reg = <0 0xe6b10000 0 0x2c>;
 		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
-		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+		       <&dmac1 0x17>, <&dmac1 0x18>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		num-cs = <1>;
 		#address-cells = <1>;
@@ -1483,8 +1507,9 @@
 		reg = <0 0xe6e20000 0 0x0064>;
 		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
-		dmas = <&dmac0 0x51>, <&dmac0 0x52>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+		       <&dmac1 0x51>, <&dmac1 0x52>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -1496,8 +1521,9 @@
 		reg = <0 0xe6e10000 0 0x0064>;
 		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
-		dmas = <&dmac0 0x55>, <&dmac0 0x56>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+		       <&dmac1 0x55>, <&dmac1 0x56>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -1509,8 +1535,9 @@
 		reg = <0 0xe6e00000 0 0x0064>;
 		interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
-		dmas = <&dmac0 0x41>, <&dmac0 0x42>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+		       <&dmac1 0x41>, <&dmac1 0x42>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -1522,8 +1549,9 @@
 		reg = <0 0xe6c90000 0 0x0064>;
 		interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
-		dmas = <&dmac0 0x45>, <&dmac0 0x46>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x45>, <&dmac0 0x46>,
+		       <&dmac1 0x45>, <&dmac1 0x46>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -1702,79 +1730,79 @@
 		status = "disabled";
 
 		rcar_sound,dvc {
-			dvc0: dvc@0 {
+			dvc0: dvc-0 {
 				dmas = <&audma0 0xbc>;
 				dma-names = "tx";
 			};
-			dvc1: dvc@1 {
+			dvc1: dvc-1 {
 				dmas = <&audma0 0xbe>;
 				dma-names = "tx";
 			};
 		};
 
 		rcar_sound,mix {
-			mix0: mix@0 { };
-			mix1: mix@1 { };
+			mix0: mix-0 { };
+			mix1: mix-1 { };
 		};
 
 		rcar_sound,ctu {
-			ctu00: ctu@0 { };
-			ctu01: ctu@1 { };
-			ctu02: ctu@2 { };
-			ctu03: ctu@3 { };
-			ctu10: ctu@4 { };
-			ctu11: ctu@5 { };
-			ctu12: ctu@6 { };
-			ctu13: ctu@7 { };
+			ctu00: ctu-0 { };
+			ctu01: ctu-1 { };
+			ctu02: ctu-2 { };
+			ctu03: ctu-3 { };
+			ctu10: ctu-4 { };
+			ctu11: ctu-5 { };
+			ctu12: ctu-6 { };
+			ctu13: ctu-7 { };
 		};
 
 		rcar_sound,src {
-			src0: src@0 {
+			src0: src-0 {
 				interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x85>, <&audma1 0x9a>;
 				dma-names = "rx", "tx";
 			};
-			src1: src@1 {
+			src1: src-1 {
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x87>, <&audma1 0x9c>;
 				dma-names = "rx", "tx";
 			};
-			src2: src@2 {
+			src2: src-2 {
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x89>, <&audma1 0x9e>;
 				dma-names = "rx", "tx";
 			};
-			src3: src@3 {
+			src3: src-3 {
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x8b>, <&audma1 0xa0>;
 				dma-names = "rx", "tx";
 			};
-			src4: src@4 {
+			src4: src-4 {
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x8d>, <&audma1 0xb0>;
 				dma-names = "rx", "tx";
 			};
-			src5: src@5 {
+			src5: src-5 {
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x8f>, <&audma1 0xb2>;
 				dma-names = "rx", "tx";
 			};
-			src6: src@6 {
+			src6: src-6 {
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x91>, <&audma1 0xb4>;
 				dma-names = "rx", "tx";
 			};
-			src7: src@7 {
+			src7: src-7 {
 				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x93>, <&audma1 0xb6>;
 				dma-names = "rx", "tx";
 			};
-			src8: src@8 {
+			src8: src-8 {
 				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x95>, <&audma1 0xb8>;
 				dma-names = "rx", "tx";
 			};
-			src9: src@9 {
+			src9: src-9 {
 				interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x97>, <&audma1 0xba>;
 				dma-names = "rx", "tx";
@@ -1782,52 +1810,52 @@
 		};
 
 		rcar_sound,ssi {
-			ssi0: ssi@0 {
+			ssi0: ssi-0 {
 				interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi1: ssi@1 {
+			ssi1: ssi-1 {
 				 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi2: ssi@2 {
+			ssi2: ssi-2 {
 				interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi3: ssi@3 {
+			ssi3: ssi-3 {
 				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi4: ssi@4 {
+			ssi4: ssi-4 {
 				interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi5: ssi@5 {
+			ssi5: ssi-5 {
 				interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi6: ssi@6 {
+			ssi6: ssi-6 {
 				interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi7: ssi@7 {
+			ssi7: ssi-7 {
 				interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi8: ssi@8 {
+			ssi8: ssi-8 {
 				interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi9: ssi@9 {
+			ssi9: ssi-9 {
 				interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
 				dma-names = "rx", "tx", "rxu", "txu";
diff --git a/src/arm/r8a7791-koelsch.dts b/src/arm/r8a7791-koelsch.dts
index da59c2844b8a..5405d337d744 100644
--- a/src/arm/r8a7791-koelsch.dts
+++ b/src/arm/r8a7791-koelsch.dts
@@ -50,6 +50,8 @@
 	aliases {
 		serial0 = &scif0;
 		serial1 = &scif1;
+		i2c9 = &gpioi2c1;
+		i2c12 = &i2cexio1;
 	};
 
 	chosen {
@@ -170,7 +172,7 @@
 		};
 	};
 
-	vcc_sdhi0: regulator@0 {
+	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI0 Vcc";
@@ -181,7 +183,7 @@
 		enable-active-high;
 	};
 
-	vccq_sdhi0: regulator@1 {
+	vccq_sdhi0: regulator-vccq-sdhi0 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI0 VccQ";
@@ -194,7 +196,7 @@
 			  1800000 0>;
 	};
 
-	vcc_sdhi1: regulator@2 {
+	vcc_sdhi1: regulator-vcc-sdhi1 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI1 Vcc";
@@ -205,7 +207,7 @@
 		enable-active-high;
 	};
 
-	vccq_sdhi1: regulator@3 {
+	vccq_sdhi1: regulator-vccq-sdhi1 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI1 VccQ";
@@ -218,7 +220,7 @@
 			  1800000 0>;
 	};
 
-	vcc_sdhi2: regulator@4 {
+	vcc_sdhi2: regulator-vcc-sdhi2 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI2 Vcc";
@@ -229,7 +231,7 @@
 		enable-active-high;
 	};
 
-	vccq_sdhi2: regulator@5 {
+	vccq_sdhi2: regulator-vccq-sdhi2 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI2 VccQ";
@@ -265,12 +267,23 @@
 		};
 	};
 
+	hdmi-in {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&adv7612_in>;
+			};
+		};
+	};
+
 	hdmi-out {
 		compatible = "hdmi-connector";
 		type = "a";
 
 		port {
-			hdmi_con: endpoint {
+			hdmi_con_out: endpoint {
 				remote-endpoint = <&adv7511_out>;
 			};
 		};
@@ -287,6 +300,29 @@
 		#clock-cells = <0>;
 		clock-frequency = <148500000>;
 	};
+
+	gpioi2c1: i2c-9 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		gpios = <&gpio7 16 GPIO_ACTIVE_HIGH /* sda */
+			 &gpio7 15 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	/*
+	 * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
+	 * A fallback to GPIO is provided.
+	 */
+	i2cexio1: i2c-12 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&i2c1>, <&gpioi2c1>;
+		i2c-bus-name = "i2c-exio1";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
 };
 
 &du {
@@ -322,6 +358,11 @@
 	pinctrl-0 = <&scif_clk_pins>;
 	pinctrl-names = "default";
 
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
 	i2c2_pins: i2c2 {
 		groups = "i2c2";
 		function = "i2c2";
@@ -332,12 +373,12 @@
 		function = "du";
 	};
 
-	scif0_pins: serial0 {
+	scif0_pins: scif0 {
 		groups = "scif0_data_d";
 		function = "scif0";
 	};
 
-	scif1_pins: serial1 {
+	scif1_pins: scif1 {
 		groups = "scif1_data_d";
 		function = "scif1";
 	};
@@ -360,24 +401,45 @@
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
 	};
 
 	sdhi1_pins: sd1 {
 		groups = "sdhi1_data4", "sdhi1_ctrl";
 		function = "sdhi1";
+		power-source = <3300>;
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <1800>;
 	};
 
 	sdhi2_pins: sd2 {
 		groups = "sdhi2_data4", "sdhi2_ctrl";
 		function = "sdhi2";
+		power-source = <3300>;
 	};
 
-	qspi_pins: spi0 {
+	sdhi2_pins_uhs: sd2_uhs {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	qspi_pins: qspi {
 		groups = "qspi_ctrl", "qspi_data4";
 		function = "qspi";
 	};
 
-	msiof0_pins: spi1 {
+	msiof0_pins: msiof0 {
 		groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
 				 "msiof0_tx";
 		function = "msiof0";
@@ -393,6 +455,11 @@
 		function = "usb1";
 	};
 
+	vin0_pins: vin0 {
+		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
+		function = "vin0";
+	};
+
 	vin1_pins: vin1 {
 		groups = "vin1_data8", "vin1_clk";
 		function = "vin1";
@@ -454,33 +521,40 @@
 
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
 
 	vmmc-supply = <&vcc_sdhi0>;
 	vqmmc-supply = <&vccq_sdhi0>;
 	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
 	status = "okay";
 };
 
 &sdhi1 {
 	pinctrl-0 = <&sdhi1_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
 
 	vmmc-supply = <&vcc_sdhi1>;
 	vqmmc-supply = <&vccq_sdhi1>;
 	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+	sd-uhs-sdr50;
 	status = "okay";
 };
 
 &sdhi2 {
 	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
 
 	vmmc-supply = <&vcc_sdhi2>;
 	vqmmc-supply = <&vccq_sdhi2>;
 	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr50;
 	status = "okay";
 };
 
@@ -538,6 +612,11 @@
 	};
 };
 
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "i2c-exio1";
+};
+
 &i2c2 {
 	pinctrl-0 = <&i2c2_pins>;
 	pinctrl-names = "default";
@@ -590,7 +669,34 @@
 			port@1 {
 				reg = <1>;
 				adv7511_out: endpoint {
-					remote-endpoint = <&hdmi_con>;
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+
+	hdmi-in@4c {
+		compatible = "adi,adv7612";
+		reg = <0x4c>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		default-input = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7612_in: endpoint {
+					remote-endpoint = <&hdmi_con_in>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				adv7612_out: endpoint {
+					remote-endpoint = <&vin0ep2>;
 				};
 			};
 		};
@@ -672,6 +778,27 @@
 	cpu0-supply = <&vdd_dvfs>;
 };
 
+/* HDMI video input */
+&vin0 {
+	status = "okay";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin0ep2: endpoint {
+			remote-endpoint = <&adv7612_out>;
+			bus-width = <24>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <1>;
+			data-active = <1>;
+		};
+	};
+};
+
 /* composite video input */
 &vin1 {
 	status = "okay";
diff --git a/src/arm/r8a7791-porter.dts b/src/arm/r8a7791-porter.dts
index 6a1bb1a8209b..6761d11d3f9e 100644
--- a/src/arm/r8a7791-porter.dts
+++ b/src/arm/r8a7791-porter.dts
@@ -46,7 +46,7 @@
 		reg = <2 0x00000000 0 0x40000000>;
 	};
 
-	vcc_sdhi0: regulator@0 {
+	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI0 Vcc";
@@ -55,7 +55,7 @@
 		regulator-always-on;
 	};
 
-	vccq_sdhi0: regulator@1 {
+	vccq_sdhi0: regulator-vccq-sdhi0 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI0 VccQ";
@@ -68,7 +68,7 @@
 			  1800000 0>;
 	};
 
-	vcc_sdhi2: regulator@2 {
+	vcc_sdhi2: regulator-vcc-sdhi2 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI2 Vcc";
@@ -77,7 +77,7 @@
 		regulator-always-on;
 	};
 
-	vccq_sdhi2: regulator@3 {
+	vccq_sdhi2: regulator-vccq-sdhi2 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI2 VccQ";
@@ -142,7 +142,7 @@
 };
 
 &pfc {
-	scif0_pins: serial0 {
+	scif0_pins: scif0 {
 		groups = "scif0_data_d";
 		function = "scif0";
 	};
@@ -167,7 +167,7 @@
 		function = "sdhi2";
 	};
 
-	qspi_pins: spi0 {
+	qspi_pins: qspi {
 		groups = "qspi_ctrl", "qspi_data4";
 		function = "qspi";
 	};
diff --git a/src/arm/r8a7791.dtsi b/src/arm/r8a7791.dtsi
index db67e342c585..87214668d70f 100644
--- a/src/arm/r8a7791.dtsi
+++ b/src/arm/r8a7791.dtsi
@@ -43,6 +43,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "renesas,apmu";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -72,6 +73,14 @@
 			power-domains = <&sysc R8A7791_PD_CA15_CPU1>;
 			next-level-cache = <&L2_CA15>;
 		};
+
+		L2_CA15: cache-controller@0 {
+			compatible = "cache";
+			reg = <0>;
+			power-domains = <&sysc R8A7791_PD_CA15_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
 	};
 
 	thermal-zones {
@@ -93,11 +102,10 @@
 		};
 	};
 
-	L2_CA15: cache-controller@0 {
-		compatible = "cache";
-		power-domains = <&sysc R8A7791_PD_CA15_SCU>;
-		cache-unified;
-		cache-level = <2>;
+	apmu@e6152000 {
+		compatible = "renesas,r8a7791-apmu", "renesas,apmu";
+		reg = <0 0xe6152000 0 0x188>;
+		cpus = <&cpu0 &cpu1>;
 	};
 
 	gic: interrupt-controller@f1001000 {
@@ -514,8 +522,9 @@
 		reg = <0 0xe60b0000 0 0x425>;
 		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
-		dmas = <&dmac0 0x77>, <&dmac0 0x78>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+		       <&dmac1 0x77>, <&dmac1 0x78>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -527,8 +536,9 @@
 		reg = <0 0xe6500000 0 0x425>;
 		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
-		dmas = <&dmac0 0x61>, <&dmac0 0x62>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+		       <&dmac1 0x61>, <&dmac1 0x62>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -540,8 +550,9 @@
 		reg = <0 0xe6510000 0 0x425>;
 		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
-		dmas = <&dmac0 0x65>, <&dmac0 0x66>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+		       <&dmac1 0x65>, <&dmac1 0x66>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -556,8 +567,9 @@
 		reg = <0 0xee200000 0 0x80>;
 		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>;
-		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+		       <&dmac1 0xd1>, <&dmac1 0xd2>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		reg-io-width = <4>;
 		status = "disabled";
@@ -569,8 +581,10 @@
 		reg = <0 0xee100000 0 0x328>;
 		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_SDHI0>;
-		dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+		       <&dmac1 0xcd>, <&dmac1 0xce>;
+		dma-names = "tx", "rx", "tx", "rx";
+		max-frequency = <195000000>;
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -580,8 +594,10 @@
 		reg = <0 0xee140000 0 0x100>;
 		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_SDHI1>;
-		dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+		       <&dmac1 0xc1>, <&dmac1 0xc2>;
+		dma-names = "tx", "rx", "tx", "rx";
+		max-frequency = <97500000>;
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -591,8 +607,10 @@
 		reg = <0 0xee160000 0 0x100>;
 		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_SDHI2>;
-		dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+		       <&dmac1 0xd3>, <&dmac1 0xd4>;
+		dma-names = "tx", "rx", "tx", "rx";
+		max-frequency = <97500000>;
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -604,8 +622,9 @@
 		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x21>, <&dmac0 0x22>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+		       <&dmac1 0x21>, <&dmac1 0x22>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -617,8 +636,9 @@
 		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x25>, <&dmac0 0x26>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+		       <&dmac1 0x25>, <&dmac1 0x26>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -630,8 +650,9 @@
 		interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x27>, <&dmac0 0x28>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+		       <&dmac1 0x27>, <&dmac1 0x28>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -643,8 +664,9 @@
 		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+		       <&dmac1 0x1b>, <&dmac1 0x1c>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -656,8 +678,9 @@
 		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+		       <&dmac1 0x1f>, <&dmac1 0x20>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -669,8 +692,9 @@
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x23>, <&dmac0 0x24>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+		       <&dmac1 0x23>, <&dmac1 0x24>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -678,12 +702,13 @@
 	scifb0: serial@e6c20000 {
 		compatible = "renesas,scifb-r8a7791",
 			     "renesas,rcar-gen2-scifb", "renesas,scifb";
-		reg = <0 0xe6c20000 0 64>;
+		reg = <0 0xe6c20000 0 0x100>;
 		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+		       <&dmac1 0x3d>, <&dmac1 0x3e>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -691,12 +716,13 @@
 	scifb1: serial@e6c30000 {
 		compatible = "renesas,scifb-r8a7791",
 			     "renesas,rcar-gen2-scifb", "renesas,scifb";
-		reg = <0 0xe6c30000 0 64>;
+		reg = <0 0xe6c30000 0 0x100>;
 		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+		       <&dmac1 0x19>, <&dmac1 0x1a>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -704,12 +730,13 @@
 	scifb2: serial@e6ce0000 {
 		compatible = "renesas,scifb-r8a7791",
 			     "renesas,rcar-gen2-scifb", "renesas,scifb";
-		reg = <0 0xe6ce0000 0 64>;
+		reg = <0 0xe6ce0000 0 0x100>;
 		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+		       <&dmac1 0x1d>, <&dmac1 0x1e>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -722,8 +749,9 @@
 		clocks = <&mstp7_clks R8A7791_CLK_SCIF0>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+		       <&dmac1 0x29>, <&dmac1 0x2a>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -736,8 +764,9 @@
 		clocks = <&mstp7_clks R8A7791_CLK_SCIF1>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+		       <&dmac1 0x2d>, <&dmac1 0x2e>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -750,8 +779,9 @@
 		clocks = <&mstp7_clks R8A7791_CLK_SCIF2>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+		       <&dmac1 0x2b>, <&dmac1 0x2c>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -764,8 +794,9 @@
 		clocks = <&mstp7_clks R8A7791_CLK_SCIF3>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+		       <&dmac1 0x2f>, <&dmac1 0x30>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -778,8 +809,9 @@
 		clocks = <&mstp7_clks R8A7791_CLK_SCIF4>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+		       <&dmac1 0xfb>, <&dmac1 0xfc>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -792,8 +824,9 @@
 		clocks = <&mstp7_clks R8A7791_CLK_SCIF5>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+		       <&dmac1 0xfd>, <&dmac1 0xfe>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -806,8 +839,9 @@
 		clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+		       <&dmac1 0x39>, <&dmac1 0x3a>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -820,8 +854,9 @@
 		clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+		       <&dmac1 0x4d>, <&dmac1 0x4e>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -834,8 +869,9 @@
 		clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+		       <&dmac1 0x3b>, <&dmac1 0x3c>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -950,12 +986,6 @@
 		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>;
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-
-		renesas,has-lut;
-		renesas,has-sru;
-		renesas,#rpf = <5>;
-		renesas,#uds = <3>;
-		renesas,#wpf = <4>;
 	};
 
 	vsp1@fe930000 {
@@ -964,12 +994,6 @@
 		interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>;
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-
-		renesas,has-lif;
-		renesas,has-lut;
-		renesas,#rpf = <4>;
-		renesas,#uds = <1>;
-		renesas,#wpf = <4>;
 	};
 
 	vsp1@fe938000 {
@@ -978,12 +1002,6 @@
 		interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>;
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-
-		renesas,has-lif;
-		renesas,has-lut;
-		renesas,#rpf = <4>;
-		renesas,#uds = <1>;
-		renesas,#wpf = <4>;
 	};
 
 	du: display@feb00000 {
@@ -1467,6 +1485,16 @@
 		};
 	};
 
+	rst: reset-controller@e6160000 {
+		compatible = "renesas,r8a7791-rst";
+		reg = <0 0xe6160000 0 0x0100>;
+	};
+
+	prr: chipid@ff000044 {
+		compatible = "renesas,prr";
+		reg = <0 0xff000044 0 4>;
+	};
+
 	sysc: system-controller@e6180000 {
 		compatible = "renesas,r8a7791-sysc";
 		reg = <0 0xe6180000 0 0x0200>;
@@ -1478,8 +1506,9 @@
 		reg = <0 0xe6b10000 0 0x2c>;
 		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
-		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+		       <&dmac1 0x17>, <&dmac1 0x18>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		num-cs = <1>;
 		#address-cells = <1>;
@@ -1492,8 +1521,9 @@
 		reg = <0 0xe6e20000 0 0x0064>;
 		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
-		dmas = <&dmac0 0x51>, <&dmac0 0x52>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+		       <&dmac1 0x51>, <&dmac1 0x52>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -1505,8 +1535,9 @@
 		reg = <0 0xe6e10000 0 0x0064>;
 		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
-		dmas = <&dmac0 0x55>, <&dmac0 0x56>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+		       <&dmac1 0x55>, <&dmac1 0x56>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -1518,8 +1549,9 @@
 		reg = <0 0xe6e00000 0 0x0064>;
 		interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
-		dmas = <&dmac0 0x41>, <&dmac0 0x42>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+		       <&dmac1 0x41>, <&dmac1 0x42>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -1737,79 +1769,79 @@
 		status = "disabled";
 
 		rcar_sound,dvc {
-			dvc0: dvc@0 {
+			dvc0: dvc-0 {
 				dmas = <&audma0 0xbc>;
 				dma-names = "tx";
 			};
-			dvc1: dvc@1 {
+			dvc1: dvc-1 {
 				dmas = <&audma0 0xbe>;
 				dma-names = "tx";
 			};
 		};
 
 		rcar_sound,mix {
-			mix0: mix@0 { };
-			mix1: mix@1 { };
+			mix0: mix-0 { };
+			mix1: mix-1 { };
 		};
 
 		rcar_sound,ctu {
-			ctu00: ctu@0 { };
-			ctu01: ctu@1 { };
-			ctu02: ctu@2 { };
-			ctu03: ctu@3 { };
-			ctu10: ctu@4 { };
-			ctu11: ctu@5 { };
-			ctu12: ctu@6 { };
-			ctu13: ctu@7 { };
+			ctu00: ctu-0 { };
+			ctu01: ctu-1 { };
+			ctu02: ctu-2 { };
+			ctu03: ctu-3 { };
+			ctu10: ctu-4 { };
+			ctu11: ctu-5 { };
+			ctu12: ctu-6 { };
+			ctu13: ctu-7 { };
 		};
 
 		rcar_sound,src {
-			src0: src@0 {
+			src0: src-0 {
 				interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x85>, <&audma1 0x9a>;
 				dma-names = "rx", "tx";
 			};
-			src1: src@1 {
+			src1: src-1 {
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x87>, <&audma1 0x9c>;
 				dma-names = "rx", "tx";
 			};
-			src2: src@2 {
+			src2: src-2 {
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x89>, <&audma1 0x9e>;
 				dma-names = "rx", "tx";
 			};
-			src3: src@3 {
+			src3: src-3 {
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x8b>, <&audma1 0xa0>;
 				dma-names = "rx", "tx";
 			};
-			src4: src@4 {
+			src4: src-4 {
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x8d>, <&audma1 0xb0>;
 				dma-names = "rx", "tx";
 			};
-			src5: src@5 {
+			src5: src-5 {
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x8f>, <&audma1 0xb2>;
 				dma-names = "rx", "tx";
 			};
-			src6: src@6 {
+			src6: src-6 {
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x91>, <&audma1 0xb4>;
 				dma-names = "rx", "tx";
 			};
-			src7: src@7 {
+			src7: src-7 {
 				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x93>, <&audma1 0xb6>;
 				dma-names = "rx", "tx";
 			};
-			src8: src@8 {
+			src8: src-8 {
 				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x95>, <&audma1 0xb8>;
 				dma-names = "rx", "tx";
 			};
-			src9: src@9 {
+			src9: src-9 {
 				interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x97>, <&audma1 0xba>;
 				dma-names = "rx", "tx";
@@ -1817,52 +1849,52 @@
 		};
 
 		rcar_sound,ssi {
-			ssi0: ssi@0 {
+			ssi0: ssi-0 {
 				interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi1: ssi@1 {
+			ssi1: ssi-1 {
 				 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi2: ssi@2 {
+			ssi2: ssi-2 {
 				interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi3: ssi@3 {
+			ssi3: ssi-3 {
 				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi4: ssi@4 {
+			ssi4: ssi-4 {
 				interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi5: ssi@5 {
+			ssi5: ssi-5 {
 				interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi6: ssi@6 {
+			ssi6: ssi-6 {
 				interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi7: ssi@7 {
+			ssi7: ssi-7 {
 				interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi8: ssi@8 {
+			ssi8: ssi-8 {
 				interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi9: ssi@9 {
+			ssi9: ssi-9 {
 				interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
 				dma-names = "rx", "tx", "rxu", "txu";
diff --git a/src/arm/r8a7792-blanche.dts b/src/arm/r8a7792-blanche.dts
new file mode 100644
index 000000000000..f3ea43b7b724
--- /dev/null
+++ b/src/arm/r8a7792-blanche.dts
@@ -0,0 +1,330 @@
+/*
+ * Device Tree Source for the Blanche board
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2016 Cogent  Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7792.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Blanche";
+	compatible = "renesas,blanche", "renesas,r8a7792";
+
+	aliases {
+		serial0 = &scif0;
+		serial1 = &scif3;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	d3_3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ethernet@18000000 {
+		compatible = "smsc,lan89218", "smsc,lan9115";
+		reg = <0 0x18000000 0 0x100>;
+		phy-mode = "mii";
+		interrupt-parent = <&irqc>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		smsc,irq-push-pull;
+		reg-io-width = <4>;
+		vddvario-supply = <&d3_3v>;
+		vdd33a-supply = <&d3_3v>;
+
+		pinctrl-0 = <&lan89218_pins>;
+		pinctrl-names = "default";
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	x1_clk: x1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x2_clk: x2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <65000000>;
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-1 {
+			linux,code = <KEY_1>;
+			label = "SW2-1";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
+		};
+		key-2 {
+			linux,code = <KEY_2>;
+			label = "SW2-2";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+		};
+		key-3 {
+			linux,code = <KEY_3>;
+			label = "SW2-3";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+		};
+		key-4 {
+			linux,code = <KEY_4>;
+			label = "SW2-4";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
+		};
+		key-a {
+			linux,code = <KEY_A>;
+			label = "SW24";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+		};
+		key-b {
+			linux,code = <KEY_B>;
+			label = "SW25";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio11 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led17 {
+			gpios = <&gpio10 10 GPIO_ACTIVE_HIGH>;
+		};
+		led18 {
+			gpios = <&gpio10 11 GPIO_ACTIVE_HIGH>;
+		};
+		led19 {
+			gpios = <&gpio10 12 GPIO_ACTIVE_HIGH>;
+		};
+		led20 {
+			gpios = <&gpio10 23 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&can_clk {
+	clock-frequency = <48000000>;
+};
+
+&pfc {
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif3_pins: scif3 {
+		groups = "scif3_data";
+		function = "scif3";
+	};
+
+	lan89218_pins: lan89218 {
+		intc {
+			groups = "intc_irq0";
+			function = "intc";
+		};
+		lbsc {
+			groups = "lbsc_ex_cs0";
+			function = "lbsc";
+		};
+	};
+
+	can0_pins: can0 {
+		groups = "can0_data", "can_clk";
+		function = "can0";
+	};
+
+	sdhi0_pins: sdhi0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+	};
+
+	du0_pins: du0 {
+		groups = "du0_rgb888", "du0_sync", "du0_disp";
+		function = "du0";
+	};
+
+	du1_pins: du1 {
+		groups = "du1_rgb666", "du1_sync", "du1_disp";
+		function = "du1";
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif3 {
+	pinctrl-0 = <&scif3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&irqc>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du0_pins &du1_pins>;
+	pinctrl-names = "default";
+
+	clocks = <&mstp7_clks R8A7792_CLK_DU0>, <&mstp7_clks R8A7792_CLK_DU1>,
+		 <&x1_clk>, <&x2_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};
diff --git a/src/arm/r8a7792-wheat.dts b/src/arm/r8a7792-wheat.dts
new file mode 100644
index 000000000000..c24f26fdab1f
--- /dev/null
+++ b/src/arm/r8a7792-wheat.dts
@@ -0,0 +1,325 @@
+/*
+ * Device Tree Source for the Wheat board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corporation
+ * Copyright (C) 2016 Cogent  Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7792.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Wheat";
+	compatible = "renesas,wheat", "renesas,r8a7792";
+
+	aliases {
+		serial0 = &scif0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	d3_3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ethernet@18000000 {
+		compatible = "smsc,lan89218", "smsc,lan9115";
+		reg = <0 0x18000000 0 0x100>;
+		phy-mode = "mii";
+		interrupt-parent = <&irqc>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		smsc,irq-push-pull;
+		smsc,save-mac-address;
+		reg-io-width = <4>;
+		vddvario-supply = <&d3_3v>;
+		vdd33a-supply = <&d3_3v>;
+
+		pinctrl-0 = <&lan89218_pins>;
+		pinctrl-names = "default";
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-a {
+			linux,code = <KEY_A>;
+			label = "SW2";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+		};
+		key-b {
+			linux,code = <KEY_B>;
+			label = "SW3";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio11 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	hdmi-out0 {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con0: endpoint {
+				remote-endpoint = <&adv7513_0_out>;
+			};
+		};
+	};
+
+	hdmi-out1 {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con1: endpoint {
+				remote-endpoint = <&adv7513_1_out>;
+			};
+		};
+	};
+
+	osc2_clk: osc2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	lan89218_pins: lan89218 {
+		intc {
+			groups = "intc_irq0";
+			function = "intc";
+		};
+		lbsc {
+			groups = "lbsc_ex_cs0";
+			function = "lbsc";
+		};
+	};
+
+	can0_pins: can0 {
+		groups = "can0_data";
+		function = "can0";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data";
+		function = "can1";
+	};
+
+	sdhi0_pins: sdhi0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+	};
+
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data4";
+		function = "qspi";
+	};
+
+	du0_pins: du0 {
+		groups = "du0_rgb888", "du0_sync", "du0_disp";
+		function = "du0";
+	};
+
+	du1_pins: du1 {
+		groups = "du1_rgb666", "du1_sync", "du1_disp";
+		function = "du1";
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpol;
+		spi-cpha;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "user";
+				reg = <0x00040000 0x00400000>;
+				read-only;
+			};
+			partition@440000 {
+				label = "flash";
+				reg = <0x00440000 0x03bc0000>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hdmi@3d {
+		compatible = "adi,adv7513";
+		reg = <0x3d>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7513_0_in: endpoint {
+					remote-endpoint = <&du_out_rgb0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7513_0_out: endpoint {
+					remote-endpoint = <&hdmi_con0>;
+				};
+			};
+		};
+	};
+
+	hdmi@39 {
+		compatible = "adi,adv7513";
+		reg = <0x39>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7513_1_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7513_1_out: endpoint {
+					remote-endpoint = <&hdmi_con1>;
+				};
+			};
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du0_pins &du1_pins>;
+	pinctrl-names = "default";
+
+	clocks = <&mstp7_clks R8A7792_CLK_DU0>, <&mstp7_clks R8A7792_CLK_DU1>,
+		 <&osc2_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0";
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7513_0_in>;
+			};
+		};
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7513_1_in>;
+			};
+		};
+	};
+};
diff --git a/src/arm/r8a7792.dtsi b/src/arm/r8a7792.dtsi
new file mode 100644
index 000000000000..6ced3c1ec377
--- /dev/null
+++ b/src/arm/r8a7792.dtsi
@@ -0,0 +1,986 @@
+/*
+ * Device Tree Source for the r8a7792 SoC
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/r8a7792-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a7792-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7792";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		spi0 = &qspi;
+		spi1 = &msiof0;
+		spi2 = &msiof1;
+		vin0 = &vin0;
+		vin1 = &vin1;
+		vin2 = &vin2;
+		vin3 = &vin3;
+		vin4 = &vin4;
+		vin5 = &vin5;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "renesas,apmu";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+			clocks = <&cpg_clocks R8A7792_CLK_Z>;
+			power-domains = <&sysc R8A7792_PD_CA15_CPU0>;
+			next-level-cache = <&L2_CA15>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1000000000>;
+			power-domains = <&sysc R8A7792_PD_CA15_CPU1>;
+			next-level-cache = <&L2_CA15>;
+		};
+
+		L2_CA15: cache-controller@0 {
+			compatible = "cache";
+			reg = <0>;
+			cache-unified;
+			cache-level = <2>;
+			power-domains = <&sysc R8A7792_PD_CA15_SCU>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		apmu@e6152000 {
+			compatible = "renesas,r8a7792-apmu", "renesas,apmu";
+			reg = <0 0xe6152000 0 0x188>;
+			cpus = <&cpu0 &cpu1>;
+		};
+
+		gic: interrupt-controller@f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>,
+			      <0 0xf1002000 0 0x1000>,
+			      <0 0xf1004000 0 0x2000>,
+			      <0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		irqc: interrupt-controller@e61c0000 {
+			compatible = "renesas,irqc-r8a7792", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R8A7792_CLK_IRQC>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		timer {
+			compatible = "arm,armv7-timer";
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7792-rst";
+			reg = <0 0xe6160000 0 0x0100>;
+		};
+
+		prr: chipid@ff000044 {
+			compatible = "renesas,prr";
+			reg = <0 0xff000044 0 4>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7792-sysc";
+			reg = <0 0xe6180000 0 0x0200>;
+			#power-domain-cells = <1>;
+		};
+
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a7792";
+			reg = <0 0xe6060000 0 0x144>;
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO0>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 23>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO1>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO2>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 28>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO3>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO4>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO5>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio6: gpio@e6055100 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055100 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO6>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio7: gpio@e6055200 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055200 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO7>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio8: gpio@e6055300 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055300 0 0x50>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 256 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO8>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio9: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 288 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO9>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio10: gpio@e6055500 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055500 0 0x50>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 320 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO10>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio11: gpio@e6055600 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055600 0 0x50>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 352 30>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO11>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7792",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x20000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&mstp2_clks R8A7792_CLK_SYS_DMAC0>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		dmac1: dma-controller@e6720000 {
+			compatible = "renesas,dmac-r8a7792",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6720000 0 0x20000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&mstp2_clks R8A7792_CLK_SYS_DMAC1>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_SCIF0>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_SCIF1>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e58000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e58000 0 64>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_SCIF2>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6ea8000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ea8000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_SCIF3>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+			       <&dmac1 0x2f>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a7792",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 96>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_HSCIF0>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a7792",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 96>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_HSCIF1>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		sdhi0: sd@ee100000 {
+			compatible = "renesas,sdhi-r8a7792";
+			reg = <0 0xee100000 0 0x328>;
+			interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+			       <&dmac1 0xcd>, <&dmac1 0xce>;
+			dma-names = "tx", "rx", "tx", "rx";
+			clocks = <&mstp3_clks R8A7792_CLK_SDHI0>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		jpu: jpeg-codec@fe980000 {
+			compatible = "renesas,jpu-r8a7792",
+				     "renesas,rcar-gen2-jpu";
+			reg = <0 0xfe980000 0 0x10300>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp1_clks R8A7792_CLK_JPU>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a7792",
+				     "renesas,etheravb-rcar-gen2";
+			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp8_clks R8A7792_CLK_ETHERAVB>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		/* I2C doesn't need pinmux */
+		i2c0: i2c@e6508000 {
+			compatible = "renesas,i2c-r8a7792";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_I2C0>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6518000 {
+			compatible = "renesas,i2c-r8a7792";
+			reg = <0 0xe6518000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_I2C1>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6530000 {
+			compatible = "renesas,i2c-r8a7792";
+			reg = <0 0xe6530000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_I2C2>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e6540000 {
+			compatible = "renesas,i2c-r8a7792";
+			reg = <0 0xe6540000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_I2C3>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e6520000 {
+			compatible = "renesas,i2c-r8a7792";
+			reg = <0 0xe6520000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_I2C4>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e6528000 {
+			compatible = "renesas,i2c-r8a7792";
+			reg = <0 0xe6528000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_I2C5>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		qspi: spi@e6b10000 {
+			compatible = "renesas,qspi-r8a7792", "renesas,qspi";
+			reg = <0 0xe6b10000 0 0x2c>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_QSPI_MOD>;
+			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+			       <&dmac1 0x17>, <&dmac1 0x18>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e20000 {
+			compatible = "renesas,msiof-r8a7792";
+			reg = <0 0xe6e20000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp0_clks R8A7792_CLK_MSIOF0>;
+			dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+			       <&dmac1 0x51>, <&dmac1 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6e10000 {
+			compatible = "renesas,msiof-r8a7792";
+			reg = <0 0xe6e10000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp2_clks R8A7792_CLK_MSIOF1>;
+			dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+			       <&dmac1 0x55>, <&dmac1 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7792";
+			reg = <0 0xfeb00000 0 0x40000>;
+			reg-names = "du";
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_DU0>,
+				 <&mstp7_clks R8A7792_CLK_DU1>;
+			clock-names = "du.0", "du.1";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb0: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_rgb1: endpoint {
+					};
+				};
+			};
+		};
+
+		can0: can@e6e80000 {
+			compatible = "renesas,can-r8a7792",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e80000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_CAN0>,
+				 <&rcan_clk>, <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		can1: can@e6e88000 {
+			compatible = "renesas,can-r8a7792",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e88000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_CAN1>,
+				 <&rcan_clk>, <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp8_clks R8A7792_CLK_VIN0>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp8_clks R8A7792_CLK_VIN1>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp8_clks R8A7792_CLK_VIN2>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp8_clks R8A7792_CLK_VIN3>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp8_clks R8A7792_CLK_VIN4>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp8_clks R8A7792_CLK_VIN5>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vsp1@fe928000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe928000 0 0x8000>;
+			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp1_clks R8A7792_CLK_VSP1_SY>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		vsp1@fe930000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe930000 0 0x8000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp1_clks R8A7792_CLK_VSP1DU0>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		vsp1@fe938000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe938000 0 0x8000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp1_clks R8A7792_CLK_VSP1DU1>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks@e6150000 {
+			compatible = "renesas,r8a7792-cpg-clocks",
+				     "renesas,rcar-gen2-cpg-clocks";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			#clock-cells = <1>;
+			clock-output-names = "main", "pll0", "pll1", "pll3",
+					     "lb", "qspi", "z";
+			#power-domain-cells = <0>;
+		};
+
+		/* Fixed factor clocks */
+		pll1_div2_clk: pll1_div2 {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+		zx_clk: zx {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <3>;
+			clock-mult = <1>;
+		};
+		zs_clk: zs {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <6>;
+			clock-mult = <1>;
+		};
+		hp_clk: hp {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <12>;
+			clock-mult = <1>;
+		};
+		p_clk: p {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <24>;
+			clock-mult = <1>;
+		};
+		cp_clk: cp {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <48>;
+			clock-mult = <1>;
+		};
+		mp_clk: mp {
+			compatible = "fixed-factor-clock";
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-div = <15>;
+			clock-mult = <1>;
+		};
+		m2_clk: m2 {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+		};
+		sd_clk: sd {
+			compatible = "fixed-factor-clock";
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+		};
+		rcan_clk: rcan {
+			compatible = "fixed-factor-clock";
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-div = <49>;
+			clock-mult = <1>;
+		};
+		zg_clk: zg {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <5>;
+			clock-mult = <1>;
+		};
+
+		/* Gate clocks */
+		mstp0_clks: mstp0_clks@e6150130 {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>;
+			clocks = <&mp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7792_CLK_MSIOF0>;
+			clock-output-names = "msiof0";
+		};
+		mstp1_clks: mstp1_clks@e6150134 {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
+			clocks = <&m2_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7792_CLK_JPU
+				R8A7792_CLK_VSP1DU1 R8A7792_CLK_VSP1DU0
+				R8A7792_CLK_VSP1_SY
+			>;
+			clock-output-names = "jpu", "vsp1du1", "vsp1du0",
+					     "vsp1-sy";
+		};
+		mstp2_clks: mstp2_clks@e6150138 {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
+			clocks = <&mp_clk>, <&zs_clk>, <&zs_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7792_CLK_MSIOF1
+				R8A7792_CLK_SYS_DMAC1 R8A7792_CLK_SYS_DMAC0
+			>;
+			clock-output-names = "msiof1", "sys-dmac1", "sys-dmac0";
+		};
+		mstp3_clks: mstp3_clks@e615013c {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
+			clocks = <&sd_clk>;
+			#clock-cells = <1>;
+			renesas,clock-indices = <R8A7792_CLK_SDHI0>;
+			clock-output-names = "sdhi0";
+		};
+		mstp4_clks: mstp4_clks@e6150140 {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
+			clocks = <&cp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7792_CLK_IRQC>;
+			clock-output-names = "irqc";
+		};
+		mstp7_clks: mstp7_clks@e615014c {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
+			clocks = <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>,
+				 <&p_clk>, <&p_clk>, <&zx_clk>, <&zx_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7792_CLK_HSCIF1 R8A7792_CLK_HSCIF0
+				R8A7792_CLK_SCIF3 R8A7792_CLK_SCIF2
+				R8A7792_CLK_SCIF1 R8A7792_CLK_SCIF0
+				R8A7792_CLK_DU1 R8A7792_CLK_DU0
+			>;
+			clock-output-names = "hscif1", "hscif0", "scif3",
+					     "scif2", "scif1", "scif0",
+					     "du1", "du0";
+		};
+		mstp8_clks: mstp8_clks@e6150990 {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
+			clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>,
+			         <&zg_clk>, <&zg_clk>, <&hp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7792_CLK_VIN5 R8A7792_CLK_VIN4
+				R8A7792_CLK_VIN3 R8A7792_CLK_VIN2
+				R8A7792_CLK_VIN1 R8A7792_CLK_VIN0
+				R8A7792_CLK_ETHERAVB
+			>;
+			clock-output-names = "vin5", "vin4", "vin3", "vin2",
+					     "vin1", "vin0", "etheravb";
+		};
+		mstp9_clks: mstp9_clks@e6150994 {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
+			clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cp_clk>, <&cp_clk>, <&p_clk>, <&p_clk>,
+				 <&cpg_clocks R8A7792_CLK_QSPI>,
+				 <&cp_clk>, <&cp_clk>, <&hp_clk>, <&hp_clk>,
+				 <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7792_CLK_GPIO7 R8A7792_CLK_GPIO6
+				R8A7792_CLK_GPIO5 R8A7792_CLK_GPIO4
+				R8A7792_CLK_GPIO3 R8A7792_CLK_GPIO2
+				R8A7792_CLK_GPIO1 R8A7792_CLK_GPIO0
+				R8A7792_CLK_GPIO11 R8A7792_CLK_GPIO10
+				R8A7792_CLK_CAN1 R8A7792_CLK_CAN0
+				R8A7792_CLK_QSPI_MOD
+				R8A7792_CLK_GPIO9 R8A7792_CLK_GPIO8
+				R8A7792_CLK_I2C5 R8A7792_CLK_I2C4
+				R8A7792_CLK_I2C3 R8A7792_CLK_I2C2
+				R8A7792_CLK_I2C1 R8A7792_CLK_I2C0
+			>;
+			clock-output-names =
+				"gpio7", "gpio6", "gpio5", "gpio4",
+				"gpio3", "gpio2", "gpio1", "gpio0",
+				"gpio11", "gpio10", "can1", "can0",
+				"qspi_mod", "gpio9", "gpio8",
+				"i2c5", "i2c4", "i2c3", "i2c2",
+				"i2c1", "i2c0";
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+};
diff --git a/src/arm/r8a7793-gose.dts b/src/arm/r8a7793-gose.dts
index 0ebc3ee34923..dc311eba4444 100644
--- a/src/arm/r8a7793-gose.dts
+++ b/src/arm/r8a7793-gose.dts
@@ -158,7 +158,7 @@
 		};
 	};
 
-	vcc_sdhi0: regulator@0 {
+	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI0 Vcc";
@@ -169,7 +169,7 @@
 		enable-active-high;
 	};
 
-	vccq_sdhi0: regulator@1 {
+	vccq_sdhi0: regulator-vccq-sdhi0 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI0 VccQ";
@@ -182,7 +182,7 @@
 			  1800000 0>;
 	};
 
-	vcc_sdhi1: regulator@2 {
+	vcc_sdhi1: regulator-vcc-sdhi1 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI1 Vcc";
@@ -193,7 +193,7 @@
 		enable-active-high;
 	};
 
-	vccq_sdhi1: regulator@3 {
+	vccq_sdhi1: regulator-vccq-sdhi1 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI1 VccQ";
@@ -206,7 +206,7 @@
 			  1800000 0>;
 	};
 
-	vcc_sdhi2: regulator@4 {
+	vcc_sdhi2: regulator-vcc-sdhi2 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI2 Vcc";
@@ -217,7 +217,7 @@
 		enable-active-high;
 	};
 
-	vccq_sdhi2: regulator@5 {
+	vccq_sdhi2: regulator-vccq-sdhi2 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI2 VccQ";
@@ -320,12 +320,12 @@
 		function = "du";
 	};
 
-	scif0_pins: serial0 {
+	scif0_pins: scif0 {
 		groups = "scif0_data_d";
 		function = "scif0";
 	};
 
-	scif1_pins: serial1 {
+	scif1_pins: scif1 {
 		groups = "scif1_data_d";
 		function = "scif1";
 	};
@@ -346,21 +346,21 @@
 	};
 
 	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
-		renesas,function = "sdhi0";
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
 	};
 
 	sdhi1_pins: sd1 {
-		renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
-		renesas,function = "sdhi1";
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
 	};
 
 	sdhi2_pins: sd2 {
-		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
-		renesas,function = "sdhi2";
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
 	};
 
-	qspi_pins: spi0 {
+	qspi_pins: qspi {
 		groups = "qspi_ctrl", "qspi_data4";
 		function = "qspi";
 	};
diff --git a/src/arm/r8a7793.dtsi b/src/arm/r8a7793.dtsi
index 1dd6d202cd4c..2fb527ca0b15 100644
--- a/src/arm/r8a7793.dtsi
+++ b/src/arm/r8a7793.dtsi
@@ -35,6 +35,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "renesas,apmu";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -55,6 +56,28 @@
 					   < 375000 1000000>;
 			next-level-cache = <&L2_CA15>;
 		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1500000000>;
+			power-domains = <&sysc R8A7793_PD_CA15_CPU1>;
+		};
+
+		L2_CA15: cache-controller@0 {
+			compatible = "cache";
+			reg = <0>;
+			power-domains = <&sysc R8A7793_PD_CA15_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	apmu@e6152000 {
+		compatible = "renesas,r8a7793-apmu", "renesas,apmu";
+		reg = <0 0xe6152000 0 0x188>;
+		cpus = <&cpu0 &cpu1>;
 	};
 
 	thermal-zones {
@@ -76,13 +99,6 @@
 		};
 	};
 
-	L2_CA15: cache-controller@0 {
-		compatible = "cache";
-		power-domains = <&sysc R8A7793_PD_CA15_SCU>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
 	gic: interrupt-controller@f1001000 {
 		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
@@ -473,8 +489,9 @@
 		reg = <0 0xe60b0000 0 0x425>;
 		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>;
-		dmas = <&dmac0 0x77>, <&dmac0 0x78>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+		       <&dmac1 0x77>, <&dmac1 0x78>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -486,8 +503,9 @@
 		reg = <0 0xe6500000 0 0x425>;
 		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7793_CLK_IIC0>;
-		dmas = <&dmac0 0x61>, <&dmac0 0x62>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+		       <&dmac1 0x61>, <&dmac1 0x62>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -499,8 +517,9 @@
 		reg = <0 0xe6510000 0 0x425>;
 		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7793_CLK_IIC1>;
-		dmas = <&dmac0 0x65>, <&dmac0 0x66>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+		       <&dmac1 0x65>, <&dmac1 0x66>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -515,8 +534,9 @@
 		reg = <0 0xee100000 0 0x328>;
 		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7793_CLK_SDHI0>;
-		dmas = <&dmac0 0xcd>, <&dmac0 0xce>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+		       <&dmac1 0xcd>, <&dmac1 0xce>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -526,8 +546,9 @@
 		reg = <0 0xee140000 0 0x100>;
 		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7793_CLK_SDHI1>;
-		dmas = <&dmac0 0xc1>, <&dmac0 0xc2>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+		       <&dmac1 0xc1>, <&dmac1 0xc2>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -537,10 +558,25 @@
 		reg = <0 0xee160000 0 0x100>;
 		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7793_CLK_SDHI2>;
-		dmas = <&dmac0 0xd3>, <&dmac0 0xd4>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+		       <&dmac1 0xd3>, <&dmac1 0xd4>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	mmcif0: mmc@ee200000 {
+		compatible = "renesas,mmcif-r8a7793", "renesas,sh-mmcif";
+		reg = <0 0xee200000 0 0x80>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7793_CLK_MMCIF0>;
+		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+		       <&dmac1 0xd1>, <&dmac1 0xd2>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		reg-io-width = <4>;
 		status = "disabled";
+		max-frequency = <97500000>;
 	};
 
 	scifa0: serial@e6c40000 {
@@ -550,8 +586,9 @@
 		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7793_CLK_SCIFA0>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x21>, <&dmac0 0x22>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+		       <&dmac1 0x21>, <&dmac1 0x22>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -563,8 +600,9 @@
 		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7793_CLK_SCIFA1>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x25>, <&dmac0 0x26>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+		       <&dmac1 0x25>, <&dmac1 0x26>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -576,8 +614,9 @@
 		interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7793_CLK_SCIFA2>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x27>, <&dmac0 0x28>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+		       <&dmac1 0x27>, <&dmac1 0x28>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -589,8 +628,9 @@
 		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7793_CLK_SCIFA3>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+		       <&dmac1 0x1b>, <&dmac1 0x1c>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -602,8 +642,9 @@
 		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7793_CLK_SCIFA4>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+		       <&dmac1 0x1f>, <&dmac1 0x20>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -615,8 +656,9 @@
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7793_CLK_SCIFA5>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x23>, <&dmac0 0x24>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+		       <&dmac1 0x23>, <&dmac1 0x24>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -624,12 +666,13 @@
 	scifb0: serial@e6c20000 {
 		compatible = "renesas,scifb-r8a7793",
 			     "renesas,rcar-gen2-scifb", "renesas,scifb";
-		reg = <0 0xe6c20000 0 64>;
+		reg = <0 0xe6c20000 0 0x100>;
 		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+		       <&dmac1 0x3d>, <&dmac1 0x3e>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -637,12 +680,13 @@
 	scifb1: serial@e6c30000 {
 		compatible = "renesas,scifb-r8a7793",
 			     "renesas,rcar-gen2-scifb", "renesas,scifb";
-		reg = <0 0xe6c30000 0 64>;
+		reg = <0 0xe6c30000 0 0x100>;
 		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+		       <&dmac1 0x19>, <&dmac1 0x1a>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -650,12 +694,13 @@
 	scifb2: serial@e6ce0000 {
 		compatible = "renesas,scifb-r8a7793",
 			     "renesas,rcar-gen2-scifb", "renesas,scifb";
-		reg = <0 0xe6ce0000 0 64>;
+		reg = <0 0xe6ce0000 0 0x100>;
 		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+		       <&dmac1 0x1d>, <&dmac1 0x1e>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -668,8 +713,9 @@
 		clocks = <&mstp7_clks R8A7793_CLK_SCIF0>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+		       <&dmac1 0x29>, <&dmac1 0x2a>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -682,8 +728,9 @@
 		clocks = <&mstp7_clks R8A7793_CLK_SCIF1>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+		       <&dmac1 0x2d>, <&dmac1 0x2e>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -696,8 +743,9 @@
 		clocks = <&mstp7_clks R8A7793_CLK_SCIF2>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+		       <&dmac1 0x2b>, <&dmac1 0x2c>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -710,8 +758,9 @@
 		clocks = <&mstp7_clks R8A7793_CLK_SCIF3>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+		       <&dmac1 0x2f>, <&dmac1 0x30>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -724,8 +773,9 @@
 		clocks = <&mstp7_clks R8A7793_CLK_SCIF4>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+		       <&dmac1 0xfb>, <&dmac1 0xfc>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -738,8 +788,9 @@
 		clocks = <&mstp7_clks R8A7793_CLK_SCIF5>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+		       <&dmac1 0xfd>, <&dmac1 0xfe>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -752,8 +803,9 @@
 		clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+		       <&dmac1 0x39>, <&dmac1 0x3a>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -766,8 +818,9 @@
 		clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+		       <&dmac1 0x4d>, <&dmac1 0x4e>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -780,8 +833,9 @@
 		clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+		       <&dmac1 0x3b>, <&dmac1 0x3c>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -798,13 +852,41 @@
 		status = "disabled";
 	};
 
+	vin0: video@e6ef0000 {
+		compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin";
+		reg = <0 0xe6ef0000 0 0x1000>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7793_CLK_VIN0>;
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	vin1: video@e6ef1000 {
+		compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin";
+		reg = <0 0xe6ef1000 0 0x1000>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7793_CLK_VIN1>;
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	vin2: video@e6ef2000 {
+		compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin";
+		reg = <0 0xe6ef2000 0 0x1000>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7793_CLK_VIN2>;
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
 	qspi: spi@e6b10000 {
 		compatible = "renesas,qspi-r8a7793", "renesas,qspi";
 		reg = <0 0xe6b10000 0 0x2c>;
 		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7793_CLK_QSPI_MOD>;
-		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+		       <&dmac1 0x17>, <&dmac1 0x18>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 		num-cs = <1>;
 		#address-cells = <1>;
@@ -1224,6 +1306,16 @@
 		};
 	};
 
+	rst: reset-controller@e6160000 {
+		compatible = "renesas,r8a7793-rst";
+		reg = <0 0xe6160000 0 0x0100>;
+	};
+
+	prr: chipid@ff000044 {
+		compatible = "renesas,prr";
+		reg = <0 0xff000044 0 4>;
+	};
+
 	sysc: system-controller@e6180000 {
 		compatible = "renesas,r8a7793-sysc";
 		reg = <0 0xe6180000 0 0x0200>;
@@ -1330,63 +1422,63 @@
 		status = "disabled";
 
 		rcar_sound,dvc {
-			dvc0: dvc@0 {
+			dvc0: dvc-0 {
 				dmas = <&audma0 0xbc>;
 				dma-names = "tx";
 			};
-			dvc1: dvc@1 {
+			dvc1: dvc-1 {
 				dmas = <&audma0 0xbe>;
 				dma-names = "tx";
 			};
 		};
 
 		rcar_sound,src {
-			src0: src@0 {
+			src0: src-0 {
 				interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x85>, <&audma1 0x9a>;
 				dma-names = "rx", "tx";
 			};
-			src1: src@1 {
+			src1: src-1 {
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x87>, <&audma1 0x9c>;
 				dma-names = "rx", "tx";
 			};
-			src2: src@2 {
+			src2: src-2 {
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x89>, <&audma1 0x9e>;
 				dma-names = "rx", "tx";
 			};
-			src3: src@3 {
+			src3: src-3 {
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x8b>, <&audma1 0xa0>;
 				dma-names = "rx", "tx";
 			};
-			src4: src@4 {
+			src4: src-4 {
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x8d>, <&audma1 0xb0>;
 				dma-names = "rx", "tx";
 			};
-			src5: src@5 {
+			src5: src-5 {
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x8f>, <&audma1 0xb2>;
 				dma-names = "rx", "tx";
 			};
-			src6: src@6 {
+			src6: src-6 {
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x91>, <&audma1 0xb4>;
 				dma-names = "rx", "tx";
 			};
-			src7: src@7 {
+			src7: src-7 {
 				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x93>, <&audma1 0xb6>;
 				dma-names = "rx", "tx";
 			};
-			src8: src@8 {
+			src8: src-8 {
 				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x95>, <&audma1 0xb8>;
 				dma-names = "rx", "tx";
 			};
-			src9: src@9 {
+			src9: src-9 {
 				interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x97>, <&audma1 0xba>;
 				dma-names = "rx", "tx";
@@ -1394,52 +1486,52 @@
 		};
 
 		rcar_sound,ssi {
-			ssi0: ssi@0 {
+			ssi0: ssi-0 {
 				interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi1: ssi@1 {
+			ssi1: ssi-1 {
 				 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi2: ssi@2 {
+			ssi2: ssi-2 {
 				interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi3: ssi@3 {
+			ssi3: ssi-3 {
 				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi4: ssi@4 {
+			ssi4: ssi-4 {
 				interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi5: ssi@5 {
+			ssi5: ssi-5 {
 				interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi6: ssi@6 {
+			ssi6: ssi-6 {
 				interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi7: ssi@7 {
+			ssi7: ssi-7 {
 				interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi8: ssi@8 {
+			ssi8: ssi-8 {
 				interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi9: ssi@9 {
+			ssi9: ssi-9 {
 				interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
 				dma-names = "rx", "tx", "rxu", "txu";
diff --git a/src/arm/r8a7794-alt.dts b/src/arm/r8a7794-alt.dts
index 383ad791f1db..569e3f0e97a5 100644
--- a/src/arm/r8a7794-alt.dts
+++ b/src/arm/r8a7794-alt.dts
@@ -10,6 +10,7 @@
 
 /dts-v1/;
 #include "r8a7794.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Alt";
@@ -17,6 +18,8 @@
 
 	aliases {
 		serial0 = &scif2;
+		i2c10 = &gpioi2c4;
+		i2c12 = &i2cexio4;
 	};
 
 	chosen {
@@ -29,6 +32,63 @@
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 
+	d3_3v: regulator-d3-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	vcc_sdhi1: regulator-vcc-sdhi1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
 	lbsc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -77,6 +137,29 @@
 		#clock-cells = <0>;
 		clock-frequency = <148500000>;
 	};
+
+	gpioi2c4: i2c-10 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		gpios = <&gpio4 9 GPIO_ACTIVE_HIGH /* sda */
+			 &gpio4 8 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	/*
+	 * I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA).
+	 * A fallback to GPIO is provided.
+	 */
+	i2cexio4: i2c-14 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&i2c4>, <&gpioi2c4>;
+		i2c-bus-name = "i2c-exio4";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
 };
 
 &du {
@@ -107,11 +190,11 @@
 	pinctrl-names = "default";
 
 	du_pins: du {
-		groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_dotclkout0";
-		function = "du";
+		groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
+		function = "du1";
 	};
 
-	scif2_pins: serial2 {
+	scif2_pins: scif2 {
 		groups = "scif2_data";
 		function = "scif2";
 	};
@@ -136,10 +219,44 @@
 		function = "i2c1";
 	};
 
+	i2c4_pins: i2c4 {
+		groups = "i2c4";
+		function = "i2c4";
+	};
+
 	vin0_pins: vin0 {
 		groups = "vin0_data8", "vin0_clk";
 		function = "vin0";
 	};
+
+	mmcif0_pins: mmcif0 {
+		groups = "mmc_data8", "mmc_ctrl";
+		function = "mmc";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi1_pins: sd1 {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <3300>;
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <1800>;
+	};
 };
 
 &cmt0 {
@@ -147,7 +264,7 @@
 };
 
 &pfc {
-	qspi_pins: spi0 {
+	qspi_pins: qspi {
 		groups = "qspi_ctrl", "qspi_data4";
 		function = "qspi";
 	};
@@ -169,6 +286,44 @@
 	};
 };
 
+&mmcif0 {
+	pinctrl-0 = <&mmcif0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&d3_3v>;
+	vqmmc-supply = <&d3_3v>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
 &i2c1 {
 	pinctrl-0 = <&i2c1_pins>;
 	pinctrl-names = "default";
@@ -190,6 +345,11 @@
 	};
 };
 
+&i2c4 {
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "i2c-exio4";
+};
+
 &vin0 {
 	status = "okay";
 	pinctrl-0 = <&vin0_pins>;
diff --git a/src/arm/r8a7794-silk.dts b/src/arm/r8a7794-silk.dts
index 56d98d5b2185..cf880ac06f4b 100644
--- a/src/arm/r8a7794-silk.dts
+++ b/src/arm/r8a7794-silk.dts
@@ -10,6 +10,17 @@
  * kind, whether express or implied.
  */
 
+/*
+ * SSI-AK4643
+ *
+ * SW1: 2-1: AK4643
+ *      2-3: ADV7511
+ *
+ * This command is required before playback/capture:
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ */
+
 /dts-v1/;
 #include "r8a7794.dtsi"
 #include <dt-bindings/gpio/gpio.h>
@@ -32,7 +43,7 @@
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 
-	d3_3v: regulator@0 {
+	d3_3v: regulator-d3-3v {
 		compatible = "regulator-fixed";
 		regulator-name = "D3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -41,7 +52,7 @@
 		regulator-always-on;
 	};
 
-	vcc_sdhi1: regulator@3 {
+	vcc_sdhi1: regulator-vcc-sdhi1 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI1 Vcc";
@@ -52,7 +63,7 @@
 		enable-active-high;
 	};
 
-	vccq_sdhi1: regulator@4 {
+	vccq_sdhi1: regulator-vccq-sdhi1 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI1 VccQ";
@@ -119,6 +130,29 @@
 		#clock-cells = <0>;
 		clock-frequency = <74250000>;
 	};
+
+	x9_clk: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&soundcodec>;
+		simple-audio-card,frame-master = <&soundcodec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		soundcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			clocks = <&x9_clk>;
+		};
+	};
 };
 
 &extal_clk {
@@ -129,7 +163,7 @@
 	pinctrl-0 = <&scif_clk_pins>;
 	pinctrl-names = "default";
 
-	scif2_pins: serial2 {
+	scif2_pins: scif2 {
 		groups = "scif2_data";
 		function = "scif2";
 	};
@@ -164,7 +198,7 @@
 		function = "sdhi1";
 	};
 
-	qspi_pins: spi0 {
+	qspi_pins: qspi {
 		groups = "qspi_ctrl", "qspi_data4";
 		function = "qspi";
 	};
@@ -183,6 +217,26 @@
 		groups = "usb1";
 		function = "usb1";
 	};
+
+	du0_pins: du0 {
+		groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
+		function = "du0";
+	};
+
+	du1_pins: du1 {
+		groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
+		function = "du1";
+	};
+
+	ssi_pins: sound {
+		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
+	};
+
+	audio_clk_pins: audio_clk {
+		groups = "audio_clkc";
+		function = "audio_clk";
+	};
 };
 
 &scif2 {
@@ -220,6 +274,12 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
+	ak4643: codec@12 {
+		compatible = "asahi-kasei,ak4643";
+		#sound-dai-cells = <0>;
+		reg = <0x12>;
+	};
+
 	composite-in@20 {
 		compatible = "adi,adv7180";
 		reg = <0x20>;
@@ -360,6 +420,8 @@
 };
 
 &du {
+	pinctrl-0 = <&du0_pins &du1_pins>;
+	pinctrl-names = "default";
 	status = "okay";
 
 	clocks = <&mstp7_clks R8A7794_CLK_DU0>,
@@ -380,3 +442,23 @@
 		};
 	};
 };
+
+&rcar_sound {
+	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0>;
+			capture  = <&ssi1>;
+		};
+	};
+};
+
+&ssi1 {
+	shared-pin;
+};
diff --git a/src/arm/r8a7794.dtsi b/src/arm/r8a7794.dtsi
index f334a3a715f2..fb576dba748c 100644
--- a/src/arm/r8a7794.dtsi
+++ b/src/arm/r8a7794.dtsi
@@ -55,13 +55,14 @@
 			power-domains = <&sysc R8A7794_PD_CA7_CPU1>;
 			next-level-cache = <&L2_CA7>;
 		};
-	};
 
-	L2_CA7: cache-controller@1 {
-		compatible = "cache";
-		power-domains = <&sysc R8A7794_PD_CA7_SCU>;
-		cache-unified;
-		cache-level = <2>;
+		L2_CA7: cache-controller@0 {
+			compatible = "cache";
+			reg = <0>;
+			power-domains = <&sysc R8A7794_PD_CA7_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
 	};
 
 	gic: interrupt-controller@f1001000 {
@@ -295,6 +296,34 @@
 		dma-channels = <15>;
 	};
 
+	audma0: dma-controller@ec700000 {
+		compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac";
+		reg = <0 0xec700000 0 0x10000>;
+		interrupts =	<GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				  "ch0", "ch1", "ch2", "ch3", "ch4", "ch5",
+				  "ch6", "ch7", "ch8", "ch9", "ch10", "ch11",
+				  "ch12";
+		clocks = <&mstp5_clks R8A7794_CLK_AUDIO_DMAC0>;
+		clock-names = "fck";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+		#dma-cells = <1>;
+		dma-channels = <13>;
+	};
+
 	scifa0: serial@e6c40000 {
 		compatible = "renesas,scifa-r8a7794",
 			     "renesas,rcar-gen2-scifa", "renesas,scifa";
@@ -302,8 +331,9 @@
 		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x21>, <&dmac0 0x22>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+		       <&dmac1 0x21>, <&dmac1 0x22>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -315,8 +345,9 @@
 		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x25>, <&dmac0 0x26>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+		       <&dmac1 0x25>, <&dmac1 0x26>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -328,8 +359,9 @@
 		interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x27>, <&dmac0 0x28>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+		       <&dmac1 0x27>, <&dmac1 0x28>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -341,8 +373,9 @@
 		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+		       <&dmac1 0x1b>, <&dmac1 0x1c>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -354,8 +387,9 @@
 		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+		       <&dmac1 0x1f>, <&dmac1 0x20>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -367,8 +401,9 @@
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x23>, <&dmac0 0x24>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+		       <&dmac1 0x23>, <&dmac1 0x24>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -376,12 +411,13 @@
 	scifb0: serial@e6c20000 {
 		compatible = "renesas,scifb-r8a7794",
 			     "renesas,rcar-gen2-scifb", "renesas,scifb";
-		reg = <0 0xe6c20000 0 64>;
+		reg = <0 0xe6c20000 0 0x100>;
 		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+		       <&dmac1 0x3d>, <&dmac1 0x3e>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -389,12 +425,13 @@
 	scifb1: serial@e6c30000 {
 		compatible = "renesas,scifb-r8a7794",
 			     "renesas,rcar-gen2-scifb", "renesas,scifb";
-		reg = <0 0xe6c30000 0 64>;
+		reg = <0 0xe6c30000 0 0x100>;
 		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+		       <&dmac1 0x19>, <&dmac1 0x1a>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -402,12 +439,13 @@
 	scifb2: serial@e6ce0000 {
 		compatible = "renesas,scifb-r8a7794",
 			     "renesas,rcar-gen2-scifb", "renesas,scifb";
-		reg = <0 0xe6ce0000 0 64>;
+		reg = <0 0xe6ce0000 0 0x100>;
 		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>;
 		clock-names = "fck";
-		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+		       <&dmac1 0x1d>, <&dmac1 0x1e>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -420,8 +458,9 @@
 		clocks = <&mstp7_clks R8A7794_CLK_SCIF0>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+		       <&dmac1 0x29>, <&dmac1 0x2a>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -434,8 +473,9 @@
 		clocks = <&mstp7_clks R8A7794_CLK_SCIF1>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+		       <&dmac1 0x2d>, <&dmac1 0x2e>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -448,8 +488,9 @@
 		clocks = <&mstp7_clks R8A7794_CLK_SCIF2>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+		       <&dmac1 0x2b>, <&dmac1 0x2c>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -462,8 +503,9 @@
 		clocks = <&mstp7_clks R8A7794_CLK_SCIF3>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+		       <&dmac1 0x2f>, <&dmac1 0x30>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -476,8 +518,9 @@
 		clocks = <&mstp7_clks R8A7794_CLK_SCIF4>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+		       <&dmac1 0xfb>, <&dmac1 0xfc>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -490,8 +533,9 @@
 		clocks = <&mstp7_clks R8A7794_CLK_SCIF5>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+		       <&dmac1 0xfd>, <&dmac1 0xfe>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -504,8 +548,9 @@
 		clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+		       <&dmac1 0x39>, <&dmac1 0x3a>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -518,8 +563,9 @@
 		clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+		       <&dmac1 0x4d>, <&dmac1 0x4e>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -532,8 +578,9 @@
 		clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>, <&zs_clk>,
 			 <&scif_clk>;
 		clock-names = "fck", "brg_int", "scif_clk";
-		dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+		       <&dmac1 0x3b>, <&dmac1 0x3c>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -640,8 +687,9 @@
 		reg = <0 0xe6500000 0 0x425>;
 		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7794_CLK_IIC0>;
-		dmas = <&dmac0 0x61>, <&dmac0 0x62>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+		       <&dmac1 0x61>, <&dmac1 0x62>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -653,8 +701,9 @@
 		reg = <0 0xe6510000 0 0x425>;
 		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7794_CLK_IIC1>;
-		dmas = <&dmac0 0x65>, <&dmac0 0x66>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+		       <&dmac1 0x65>, <&dmac1 0x66>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -666,8 +715,9 @@
 		reg = <0 0xee200000 0 0x80>;
 		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>;
-		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+		       <&dmac1 0xd1>, <&dmac1 0xd2>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		reg-io-width = <4>;
 		status = "disabled";
@@ -675,9 +725,13 @@
 
 	sdhi0: sd@ee100000 {
 		compatible = "renesas,sdhi-r8a7794";
-		reg = <0 0xee100000 0 0x200>;
+		reg = <0 0xee100000 0 0x328>;
 		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7794_CLK_SDHI0>;
+		dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+		       <&dmac1 0xcd>, <&dmac1 0xce>;
+		dma-names = "tx", "rx", "tx", "rx";
+		max-frequency = <195000000>;
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -687,6 +741,10 @@
 		reg = <0 0xee140000 0 0x100>;
 		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7794_CLK_SDHI1>;
+		dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+		       <&dmac1 0xc1>, <&dmac1 0xc2>;
+		dma-names = "tx", "rx", "tx", "rx";
+		max-frequency = <97500000>;
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -696,6 +754,10 @@
 		reg = <0 0xee160000 0 0x100>;
 		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7794_CLK_SDHI2>;
+		dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+		       <&dmac1 0xd3>, <&dmac1 0xd4>;
+		dma-names = "tx", "rx", "tx", "rx";
+		max-frequency = <97500000>;
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
@@ -705,8 +767,9 @@
 		reg = <0 0xe6b10000 0 0x2c>;
 		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>;
-		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+		       <&dmac1 0x17>, <&dmac1 0x18>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		num-cs = <1>;
 		#address-cells = <1>;
@@ -834,6 +897,22 @@
 		};
 	};
 
+	vsp1@fe928000 {
+		compatible = "renesas,vsp1";
+		reg = <0 0xfe928000 0 0x8000>;
+		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7794_CLK_VSP1_S>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+	};
+
+	vsp1@fe930000 {
+		compatible = "renesas,vsp1";
+		reg = <0 0xfe930000 0 0x8000>;
+		interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7794_CLK_VSP1_DU0>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+	};
+
 	du: display@feb00000 {
 		compatible = "renesas,du-r8a7794";
 		reg = <0 0xfeb00000 0 0x40000>;
@@ -920,6 +999,27 @@
 			clock-frequency = <0>;
 		};
 
+		/*
+		 * The external audio clocks are configured  as 0 Hz fixed
+		 * frequency clocks by default.  Boards that provide audio
+		 * clocks should override them.
+		 */
+		audio_clka: audio_clka {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+		audio_clkb: audio_clkb {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+		audio_clkc: audio_clkc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks@e6150000 {
 			compatible = "renesas,r8a7794-cpg-clocks",
@@ -928,8 +1028,7 @@
 			clocks = <&extal_clk &usb_extal_clk>;
 			#clock-cells = <1>;
 			clock-output-names = "main", "pll0", "pll1", "pll3",
-					     "lb", "qspi", "sdh", "sd0", "z",
-					     "rcan";
+					     "lb", "qspi", "sdh", "sd0", "rcan";
 			#power-domain-cells = <0>;
 		};
 		/* Variable factor clocks */
@@ -1151,10 +1250,19 @@
 			clock-indices = <R8A7794_CLK_IRQC>;
 			clock-output-names = "irqc";
 		};
+		mstp5_clks: mstp5_clks@e6150144 {
+			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
+			clocks = <&hp_clk>, <&p_clk>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7794_CLK_AUDIO_DMAC0
+					 R8A7794_CLK_PWM>;
+			clock-output-names = "audmac0", "pwm";
+		};
 		mstp7_clks: mstp7_clks@e615014c {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
-			clocks = <&mp_clk>, <&mp_clk>,
+			clocks = <&mp_clk>, <&hp_clk>,
 				 <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
 				 <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
 				 <&zx_clk>;
@@ -1205,6 +1313,58 @@
 				"gpio1", "gpio0", "rcan1", "rcan0", "qspi_mod",
 				"i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
 		};
+		mstp10_clks: mstp10_clks@e6150998 {
+			compatible = "renesas,r8a7794-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
+			clocks = <&p_clk>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&p_clk>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7794_CLK_SSI_ALL
+					 R8A7794_CLK_SSI9 R8A7794_CLK_SSI8
+					 R8A7794_CLK_SSI7 R8A7794_CLK_SSI6
+					 R8A7794_CLK_SSI5 R8A7794_CLK_SSI4
+					 R8A7794_CLK_SSI3 R8A7794_CLK_SSI2
+					 R8A7794_CLK_SSI1 R8A7794_CLK_SSI0
+					 R8A7794_CLK_SCU_ALL
+					 R8A7794_CLK_SCU_DVC1
+					 R8A7794_CLK_SCU_DVC0
+					 R8A7794_CLK_SCU_CTU1_MIX1
+					 R8A7794_CLK_SCU_CTU0_MIX0
+					 R8A7794_CLK_SCU_SRC6
+					 R8A7794_CLK_SCU_SRC5
+					 R8A7794_CLK_SCU_SRC4
+					 R8A7794_CLK_SCU_SRC3
+					 R8A7794_CLK_SCU_SRC2
+					 R8A7794_CLK_SCU_SRC1>;
+			clock-output-names = "ssi-all", "ssi9", "ssi8", "ssi7",
+					     "ssi6", "ssi5", "ssi4", "ssi3",
+					     "ssi2", "ssi1", "ssi0",
+					     "scu-all", "scu-dvc1", "scu-dvc0",
+					     "scu-ctu1-mix1", "scu-ctu0-mix0",
+					     "scu-src6", "scu-src5", "scu-src4",
+					     "scu-src3", "scu-src2", "scu-src1";
+		};
 		mstp11_clks: mstp11_clks@e615099c {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
@@ -1217,6 +1377,16 @@
 		};
 	};
 
+	rst: reset-controller@e6160000 {
+		compatible = "renesas,r8a7794-rst";
+		reg = <0 0xe6160000 0 0x0100>;
+	};
+
+	prr: chipid@ff000044 {
+		compatible = "renesas,prr";
+		reg = <0 0xff000044 0 4>;
+	};
+
 	sysc: system-controller@e6180000 {
 		compatible = "renesas,r8a7794-sysc";
 		reg = <0 0xe6180000 0 0x0200>;
@@ -1274,4 +1444,185 @@
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
+
+	rcar_sound: sound@ec500000 {
+		/*
+		 * #sound-dai-cells is required
+		 *
+		 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
+		 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
+		 */
+		compatible = "renesas,rcar_sound-r8a7794",
+			     "renesas,rcar_sound-gen2";
+		reg =	<0 0xec500000 0 0x1000>, /* SCU */
+			<0 0xec5a0000 0 0x100>,  /* ADG */
+			<0 0xec540000 0 0x1000>, /* SSIU */
+			<0 0xec541000 0 0x280>,  /* SSI */
+			<0 0xec740000 0 0x200>;  /* Audio DMAC peri peri */
+		reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+		clocks = <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+			 <&mstp10_clks R8A7794_CLK_SSI9>,
+			 <&mstp10_clks R8A7794_CLK_SSI8>,
+			 <&mstp10_clks R8A7794_CLK_SSI7>,
+			 <&mstp10_clks R8A7794_CLK_SSI6>,
+			 <&mstp10_clks R8A7794_CLK_SSI5>,
+			 <&mstp10_clks R8A7794_CLK_SSI4>,
+			 <&mstp10_clks R8A7794_CLK_SSI3>,
+			 <&mstp10_clks R8A7794_CLK_SSI2>,
+			 <&mstp10_clks R8A7794_CLK_SSI1>,
+			 <&mstp10_clks R8A7794_CLK_SSI0>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC6>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC5>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC4>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC3>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC2>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC1>,
+			 <&mstp10_clks R8A7794_CLK_SCU_CTU0_MIX0>,
+			 <&mstp10_clks R8A7794_CLK_SCU_CTU1_MIX1>,
+			 <&mstp10_clks R8A7794_CLK_SCU_CTU0_MIX0>,
+			 <&mstp10_clks R8A7794_CLK_SCU_CTU1_MIX1>,
+			 <&mstp10_clks R8A7794_CLK_SCU_DVC0>,
+			 <&mstp10_clks R8A7794_CLK_SCU_DVC1>,
+			 <&audio_clka>, <&audio_clkb>, <&audio_clkc>,
+			 <&m2_clk>;
+		clock-names = "ssi-all",
+			      "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+			      "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
+			      "src.6", "src.5", "src.4", "src.3", "src.2",
+			      "src.1",
+			      "ctu.0", "ctu.1",
+			      "mix.0", "mix.1",
+			      "dvc.0", "dvc.1",
+			      "clk_a", "clk_b", "clk_c", "clk_i";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+
+		status = "disabled";
+
+		rcar_sound,dvc {
+			dvc0: dvc-0 {
+				dmas = <&audma0 0xbc>;
+				dma-names = "tx";
+			};
+			dvc1: dvc-1 {
+				dmas = <&audma0 0xbe>;
+				dma-names = "tx";
+			};
+		};
+
+		rcar_sound,mix {
+			mix0: mix-0 { };
+			mix1: mix-1 { };
+		};
+
+		rcar_sound,ctu {
+			ctu00: ctu-0 { };
+			ctu01: ctu-1 { };
+			ctu02: ctu-2 { };
+			ctu03: ctu-3 { };
+			ctu10: ctu-4 { };
+			ctu11: ctu-5 { };
+			ctu12: ctu-6 { };
+			ctu13: ctu-7 { };
+		};
+
+		rcar_sound,src {
+			src-0 {
+				status = "disabled";
+			};
+			src1: src-1 {
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x87>, <&audma0 0x9c>;
+				dma-names = "rx", "tx";
+			};
+			src2: src-2 {
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x89>, <&audma0 0x9e>;
+				dma-names = "rx", "tx";
+			};
+			src3: src-3 {
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x8b>, <&audma0 0xa0>;
+				dma-names = "rx", "tx";
+			};
+			src4: src-4 {
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x8d>, <&audma0 0xb0>;
+				dma-names = "rx", "tx";
+			};
+			src5: src-5 {
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+				dma-names = "rx", "tx";
+			};
+			src6: src-6 {
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x91>, <&audma0 0xb4>;
+				dma-names = "rx", "tx";
+			};
+		};
+
+		rcar_sound,ssi {
+			ssi0: ssi-0 {
+				interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x01>, <&audma0 0x02>,
+				       <&audma0 0x15>, <&audma0 0x16>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi1: ssi-1 {
+				interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x03>, <&audma0 0x04>,
+				       <&audma0 0x49>, <&audma0 0x4a>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi2: ssi-2 {
+				interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x05>, <&audma0 0x06>,
+				       <&audma0 0x63>, <&audma0 0x64>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi3: ssi-3 {
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x07>, <&audma0 0x08>,
+				       <&audma0 0x6f>, <&audma0 0x70>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi4: ssi-4 {
+				interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x09>, <&audma0 0x0a>,
+				       <&audma0 0x71>, <&audma0 0x72>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi5: ssi-5 {
+				interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x0b>, <&audma0 0x0c>,
+				       <&audma0 0x73>, <&audma0 0x74>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi6: ssi-6 {
+				interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x0d>, <&audma0 0x0e>,
+				       <&audma0 0x75>, <&audma0 0x76>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi7: ssi-7 {
+				interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x0f>, <&audma0 0x10>,
+				       <&audma0 0x79>, <&audma0 0x7a>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi8: ssi-8 {
+				interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x11>, <&audma0 0x12>,
+				       <&audma0 0x7b>, <&audma0 0x7c>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi9: ssi-9 {
+				interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x13>, <&audma0 0x14>,
+				       <&audma0 0x7d>, <&audma0 0x7e>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+		};
+	};
 };
diff --git a/src/arm/rk1108-evb.dts b/src/arm/rk1108-evb.dts
new file mode 100644
index 000000000000..3956cff4ca79
--- /dev/null
+++ b/src/arm/rk1108-evb.dts
@@ -0,0 +1,69 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk1108.dtsi"
+
+/ {
+	model = "Rockchip RK1108 Evaluation board";
+	compatible = "rockchip,rk1108-evb", "rockchip,rk1108";
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x08000000>;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/src/arm/rk1108.dtsi b/src/arm/rk1108.dtsi
new file mode 100644
index 000000000000..d7700235e0f5
--- /dev/null
+++ b/src/arm/rk1108.dtsi
@@ -0,0 +1,452 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/rk1108-cru.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	compatible = "rockchip,rk1108";
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	amba {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pdma: pdma@102a0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x102a0000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
+			clocks = <&cru ACLK_DMAC>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	bus_intmem@10080000 {
+		compatible = "mmio-sram";
+		reg = <0x10080000 0x2000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x10080000 0x2000>;
+	};
+
+	uart2: serial@10210000 {
+		compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
+		reg = <0x10210000 0x100>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2m0_xfer>;
+		status = "disabled";
+	};
+
+	uart1: serial@10220000 {
+		compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
+		reg = <0x10220000 0x100>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		status = "disabled";
+	};
+
+	uart0: serial@10230000 {
+		compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
+		reg = <0x10230000 0x100>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		status = "disabled";
+	};
+
+	grf: syscon@10300000 {
+		compatible = "rockchip,rk1108-grf", "syscon";
+		reg = <0x10300000 0x1000>;
+	};
+
+	pmugrf: syscon@20060000 {
+		compatible = "rockchip,rk1108-pmugrf", "syscon";
+		reg = <0x20060000 0x1000>;
+	};
+
+	cru: clock-controller@20200000 {
+		compatible = "rockchip,rk1108-cru";
+		reg = <0x20200000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	emmc: dwmmc@30110000 {
+		compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+		clock-freq-min-max = <400000 150000000>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x30110000 0x4000>;
+		status = "disabled";
+	};
+
+	sdio: dwmmc@30120000 {
+		compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+		clock-freq-min-max = <400000 150000000>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x30120000 0x4000>;
+		status = "disabled";
+	};
+
+	sdmmc: dwmmc@30130000 {
+		compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+		clock-freq-min-max = <400000 100000000>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x30130000 0x4000>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@32010000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0x32011000 0x1000>,
+		      <0x32012000 0x1000>,
+		      <0x32014000 0x2000>,
+		      <0x32016000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk1108-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmugrf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@20030000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20030000 0x100>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xin24m>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@10310000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x10310000 0x100>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xin24m>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@10320000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x10320000 0x100>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xin24m>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio3@10330000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x10330000 0x100>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xin24m>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma {
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+			bias-pull-up;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_none_drv_4ma: pcfg-pull-none-drv-4ma {
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_up_drv_4ma: pcfg-pull-up-drv-4ma {
+			bias-pull-up;
+			drive-strength = <4>;
+		};
+
+		pcfg_output_high: pcfg-output-high {
+			output-high;
+		};
+
+		pcfg_output_low: pcfg-output-low {
+			output-low;
+		};
+
+		pcfg_input_high: pcfg-input-high {
+			bias-pull-up;
+			input-enable;
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>,
+						<2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>;
+			};
+		};
+
+		i2c2m1 {
+			i2c2m1_xfer: i2c2m1-xfer {
+				rockchip,pins = <0 RK_PC2 RK_FUNC_2 &pcfg_pull_none>,
+						<0 RK_PC6 RK_FUNC_3 &pcfg_pull_none>;
+			};
+
+			i2c2m1_gpio: i2c2m1-gpio {
+				rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,
+						<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		i2c2m05v {
+			i2c2m05v_xfer: i2c2m05v-xfer {
+				rockchip,pins = <1 RK_PD5 RK_FUNC_2 &pcfg_pull_none>,
+						<1 RK_PD4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			i2c2m05v_gpio: i2c2m05v-gpio {
+				rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
+						<1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <0 RK_PB6 RK_FUNC_1 &pcfg_pull_none>,
+						<0 RK_PC4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins = <3 RK_PC4 RK_FUNC_1 &pcfg_pull_none_drv_4ma>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins = <3 RK_PC5 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
+			};
+
+			sdmmc_cd: sdmmc-cd {
+				rockchip,pins = <0 RK_PA1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
+			};
+
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
+						<3 RK_PC2 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
+						<3 RK_PC1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
+						<3 RK_PC0 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <3 RK_PA6 RK_FUNC_1 &pcfg_pull_up>,
+						<3 RK_PA5 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <3 RK_PA3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_rts_gpio: uart0-rts-gpio {
+				rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <1 RK_PD3 RK_FUNC_1 &pcfg_pull_up>,
+						<1 RK_PD2 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <1 RK_PD0 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <1 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2m0 {
+			uart2m0_xfer: uart2m0-xfer {
+				rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>,
+						<2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2m1 {
+			uart2m1_xfer: uart2m1-xfer {
+				rockchip,pins = <3 RK_PC3 RK_FUNC_2 &pcfg_pull_up>,
+						<3 RK_PC2 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		uart2_5v {
+			uart2_5v_cts: uart2_5v-cts {
+				rockchip,pins = <1 RK_PD4 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart2_5v_rts: uart2_5v-rts {
+				rockchip,pins = <1 RK_PD5 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/src/arm/rk3036-evb.dts b/src/arm/rk3036-evb.dts
index 8db9e9b197a2..2f5f15524fba 100644
--- a/src/arm/rk3036-evb.dts
+++ b/src/arm/rk3036-evb.dts
@@ -46,7 +46,7 @@
 	model = "Rockchip RK3036 Evaluation board";
 	compatible = "rockchip,rk3036-evb", "rockchip,rk3036";
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
 	};
diff --git a/src/arm/rk3036-kylin.dts b/src/arm/rk3036-kylin.dts
index 1df1557a46c3..3de958ec29c0 100644
--- a/src/arm/rk3036-kylin.dts
+++ b/src/arm/rk3036-kylin.dts
@@ -46,7 +46,7 @@
 	model = "Rockchip RK3036 KylinBoard";
 	compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x20000000>;
 	};
diff --git a/src/arm/rk3036.dtsi b/src/arm/rk3036.dtsi
index 843d2be2e4e9..4ed49a243e5c 100644
--- a/src/arm/rk3036.dtsi
+++ b/src/arm/rk3036.dtsi
@@ -43,9 +43,12 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/clock/rk3036-cru.h>
-#include "skeleton.dtsi"
+#include <dt-bindings/soc/rockchip,boot-mode.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	compatible = "rockchip,rk3036";
 
 	interrupt-parent = <&gic>;
@@ -203,7 +206,6 @@
 		g-np-tx-fifo-size = <16>;
 		g-rx-fifo-size = <275>;
 		g-tx-fifo-size = <256 128 128 64 64 32>;
-		g-use-dma;
 		status = "disabled";
 	};
 
@@ -243,7 +245,7 @@
 		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x10214000 0x4000>;
 		clock-frequency = <37500000>;
-		clock-freq-min-max = <400000 37500000>;
+		max-frequency = <37500000>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
 		clock-names = "biu", "ciu";
 		fifo-depth = <0x100>;
@@ -254,7 +256,7 @@
 	sdio: dwmmc@10218000 {
 		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x10218000 0x4000>;
-		clock-freq-min-max = <400000 37500000>;
+		max-frequency = <37500000>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
@@ -270,7 +272,7 @@
 		bus-width = <8>;
 		cap-mmc-highspeed;
 		clock-frequency = <37500000>;
-		clock-freq-min-max = <400000 37500000>;
+		max-frequency = <37500000>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
@@ -313,8 +315,17 @@
 	};
 
 	grf: syscon@20008000 {
-		compatible = "rockchip,rk3036-grf", "syscon";
+		compatible = "rockchip,rk3036-grf", "syscon", "simple-mfd";
 		reg = <0x20008000 0x1000>;
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x1d8>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+			mode-bootloader = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+		};
 	};
 
 	acodec: acodec-ana@20030000 {
diff --git a/src/arm/rk3066a-bqcurie2.dts b/src/arm/rk3066a-bqcurie2.dts
index bc674ee206ec..c0d8b5446ba7 100644
--- a/src/arm/rk3066a-bqcurie2.dts
+++ b/src/arm/rk3066a-bqcurie2.dts
@@ -49,7 +49,7 @@
 	model = "bq Curie 2";
 	compatible = "mundoreader,bq-curie2", "rockchip,rk3066a";
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
 	};
diff --git a/src/arm/rk3066a-marsboard.dts b/src/arm/rk3066a-marsboard.dts
index a2b763e949b4..0a54c4beff8d 100644
--- a/src/arm/rk3066a-marsboard.dts
+++ b/src/arm/rk3066a-marsboard.dts
@@ -47,7 +47,7 @@
 	model = "MarsBoard RK3066";
 	compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a";
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
 	};
diff --git a/src/arm/rk3066a-mk808.dts b/src/arm/rk3066a-mk808.dts
new file mode 100644
index 000000000000..658eb7ddeaf5
--- /dev/null
+++ b/src/arm/rk3066a-mk808.dts
@@ -0,0 +1,195 @@
+/*
+ * Copyright (c) 2016 Paweł Jarosz <paweljarosz3691@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3066a.dtsi"
+
+/ {
+	model = "Rikomagic MK808";
+	compatible = "rikomagic,mk808", "rockchip,rk3066a";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@60000000 {
+		reg = <0x60000000 0x40000000>;
+		device_type = "memory";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "mk808:blue:power";
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_host: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&host_drv>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-name = "host-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_otg: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&otg_drv>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-name = "vcc_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&sdmmc_pwr>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_wifi: sdio-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&wifi_pwr>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_wifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	num-slots = <1>;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_wifi>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb-host {
+		host_drv: host-drv {
+			rockchip,pins = <RK_GPIO0 6 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	usb-otg {
+		otg_drv: otg-drv {
+			rockchip,pins = <RK_GPIO0 5 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <RK_GPIO3 7 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	sdio {
+		wifi_pwr: wifi-pwr {
+			rockchip,pins = <RK_GPIO3 24 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/src/arm/rk3066a-rayeager.dts b/src/arm/rk3066a-rayeager.dts
index 6e7f2187a0e3..82465b644443 100644
--- a/src/arm/rk3066a-rayeager.dts
+++ b/src/arm/rk3066a-rayeager.dts
@@ -48,7 +48,7 @@
 	model = "Rayeager PX2";
 	compatible = "chipspark,rayeager-px2", "rockchip,rk3066a";
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
 	};
diff --git a/src/arm/rk3066a.dtsi b/src/arm/rk3066a.dtsi
index c0ba86c3a2ab..e498c362b9e7 100644
--- a/src/arm/rk3066a.dtsi
+++ b/src/arm/rk3066a.dtsi
@@ -151,6 +151,14 @@
 
 		#clock-cells = <1>;
 		#reset-cells = <1>;
+		assigned-clocks = <&cru PLL_CPLL>, <&cru PLL_GPLL>,
+				  <&cru ACLK_CPU>, <&cru HCLK_CPU>,
+				  <&cru PCLK_CPU>, <&cru ACLK_PERI>,
+				  <&cru HCLK_PERI>, <&cru PCLK_PERI>;
+		assigned-clock-rates = <400000000>, <594000000>,
+				       <300000000>, <150000000>,
+				       <75000000>, <300000000>,
+				       <150000000>, <75000000>;
 	};
 
 	timer@2000e000 {
@@ -162,7 +170,7 @@
 	};
 
 	efuse: efuse@20010000 {
-		compatible = "rockchip,rockchip-efuse";
+		compatible = "rockchip,rk3066a-efuse";
 		reg = <0x20010000 0x4000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -197,6 +205,8 @@
 		clock-names = "saradc", "apb_pclk";
 		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		#io-channel-cells = <1>;
+		resets = <&cru SRST_TSADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};
 
@@ -626,15 +636,26 @@
 };
 
 &mmc0 {
+	clock-frequency = <50000000>;
+	dmas = <&dmac2 1>;
+	dma-names = "rx-tx";
+	max-frequency = <50000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
 };
 
 &mmc1 {
+	dmas = <&dmac2 3>;
+	dma-names = "rx-tx";
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
 };
 
+&emmc {
+	dmas = <&dmac2 4>;
+	dma-names = "rx-tx";
+};
+
 &pwm0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_out>;
@@ -666,21 +687,29 @@
 };
 
 &uart0 {
+	dmas = <&dmac1_s 0>, <&dmac1_s 1>;
+	dma-names = "tx", "rx";
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_xfer>;
 };
 
 &uart1 {
+	dmas = <&dmac1_s 2>, <&dmac1_s 3>;
+	dma-names = "tx", "rx";
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_xfer>;
 };
 
 &uart2 {
+	dmas = <&dmac2 6>, <&dmac2 7>;
+	dma-names = "tx", "rx";
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart2_xfer>;
 };
 
 &uart3 {
+	dmas = <&dmac2 8>, <&dmac2 9>;
+	dma-names = "tx", "rx";
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_xfer>;
 };
diff --git a/src/arm/rk3188-px3-evb.dts b/src/arm/rk3188-px3-evb.dts
new file mode 100644
index 000000000000..df727bafd6dc
--- /dev/null
+++ b/src/arm/rk3188-px3-evb.dts
@@ -0,0 +1,328 @@
+/*
+ * Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3188.dtsi"
+
+/ {
+	model = "Rockchip PX3-EVB";
+	compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@60000000 {
+		reg = <0x60000000 0x80000000>;
+		device_type = "memory";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		power {
+			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			wakeup-source;
+			debounce-interval = <100>;
+		};
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	accelerometer@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	rk808: pmic@1c {
+		compatible = "rockchip,rk818";
+		reg = <0x1c>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_io>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_arm";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_cif: LDO_REG1 {
+				 regulator-min-microvolt = <3300000>;
+				 regulator-max-microvolt = <3300000>;
+				 regulator-name = "vcc_cif";
+			};
+
+			vcc_jetta33: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_jetta33";
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			lvds_12: LDO_REG4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "lvds_12";
+			};
+
+			lvds_25: LDO_REG5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "lvds_25";
+			};
+
+			cif_18: LDO_REG6 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "cif_18";
+			};
+
+			vcc_sd: LDO_REG7 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			wl_18: LDO_REG8 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "wl_18";
+			};
+
+			lcd_33: SWITCH_REG1 {
+				regulator-name = "lcd_33";
+			};
+		};
+	};
+
+};
+
+&i2c2 {
+	gsl1680: touchscreen@40 {
+		compatible = "silead,gsl1680";
+		reg = <0x40>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+		power-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <1280>;
+		silead,max-fingers = <5>;
+	};
+};
+
+&mmc0 {
+	num-slots = <1>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	vmmc-supply = <&vcc_sd>;
+
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+};
+
+&pinctrl {
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/src/arm/rk3188-radxarock.dts b/src/arm/rk3188-radxarock.dts
index 1da46d138029..5e8a235ed02d 100644
--- a/src/arm/rk3188-radxarock.dts
+++ b/src/arm/rk3188-radxarock.dts
@@ -48,7 +48,7 @@
 	model = "Radxa Rock";
 	compatible = "radxa,rock", "rockchip,rk3188";
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x80000000>;
 	};
diff --git a/src/arm/rk3188.dtsi b/src/arm/rk3188.dtsi
index 31f81b265cef..869e189331ec 100644
--- a/src/arm/rk3188.dtsi
+++ b/src/arm/rk3188.dtsi
@@ -147,7 +147,7 @@
 	};
 
 	efuse: efuse@20010000 {
-		compatible = "rockchip,rockchip-efuse";
+		compatible = "rockchip,rk3188-efuse";
 		reg = <0x20010000 0x4000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/src/arm/rk3228-evb.dts b/src/arm/rk3228-evb.dts
index 5956e8246abe..58834330a5ba 100644
--- a/src/arm/rk3228-evb.dts
+++ b/src/arm/rk3228-evb.dts
@@ -40,13 +40,13 @@
 
 /dts-v1/;
 
-#include "rk3228.dtsi"
+#include "rk322x.dtsi"
 
 / {
 	model = "Rockchip RK3228 Evaluation board";
 	compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
 	};
diff --git a/src/arm/rk3229-evb.dts b/src/arm/rk3229-evb.dts
new file mode 100644
index 000000000000..dcdd0cee619e
--- /dev/null
+++ b/src/arm/rk3229-evb.dts
@@ -0,0 +1,90 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk322x.dtsi"
+
+/ {
+	model = "Rockchip RK3229 Evaluation board";
+	compatible = "rockchip,rk3229-evb", "rockchip,rk3229";
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	ext_gmac: ext_gmac {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		regulator-name = "vcc_phy";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC_EXTCLK>, <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>, <&cru SCLK_MAC_EXTCLK>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/src/arm/rk322x.dtsi b/src/arm/rk322x.dtsi
new file mode 100644
index 000000000000..9d3aee5abc15
--- /dev/null
+++ b/src/arm/rk322x.dtsi
@@ -0,0 +1,707 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3228-cru.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			resets = <&cru SRST_CORE0>;
+			operating-points = <
+				/* KHz    uV */
+				 816000 1000000
+			>;
+			#cooling-cells = <2>; /* min followed by max */
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+		};
+
+		cpu1: cpu@f01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			resets = <&cru SRST_CORE1>;
+		};
+
+		cpu2: cpu@f02 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf02>;
+			resets = <&cru SRST_CORE2>;
+		};
+
+		cpu3: cpu@f03 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf03>;
+			resets = <&cru SRST_CORE3>;
+		};
+	};
+
+	amba {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pdma: pdma@110f0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x110f0000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&cru ACLK_DMAC>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		arm,cpu-registers-not-fw-configured;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	i2s1: i2s1@100b0000 {
+		compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
+		reg = <0x100b0000 0x4000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1_8CH>;
+		dmas = <&pdma 14>, <&pdma 15>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1_bus>;
+		status = "disabled";
+	};
+
+	i2s0: i2s0@100c0000 {
+		compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
+		reg = <0x100c0000 0x4000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0_8CH>;
+		dmas = <&pdma 11>, <&pdma 12>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	i2s2: i2s2@100e0000 {
+		compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
+		reg = <0x100e0000 0x4000>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2_2CH>;
+		dmas = <&pdma 0>, <&pdma 1>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	grf: syscon@11000000 {
+		compatible = "syscon";
+		reg = <0x11000000 0x1000>;
+	};
+
+	uart0: serial@11010000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x11010000 0x100>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart1: serial@11020000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x11020000 0x100>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart2: serial@11030000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x11030000 0x100>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@11050000 {
+		compatible = "rockchip,rk3228-i2c";
+		reg = <0x11050000 0x1000>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@11060000 {
+		compatible = "rockchip,rk3228-i2c";
+		reg = <0x11060000 0x1000>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@11070000 {
+		compatible = "rockchip,rk3228-i2c";
+		reg = <0x11070000 0x1000>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@11080000 {
+		compatible = "rockchip,rk3228-i2c";
+		reg = <0x11080000 0x1000>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@110b0000 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0x110b0000 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@110b0010 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0x110b0010 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@110b0020 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0x110b0020 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@110b0030 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0x110b0030 0x10>;
+		#pwm-cells = <2>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		status = "disabled";
+	};
+
+	timer: timer@110c0000 {
+		compatible = "rockchip,rk3288-timer";
+		reg = <0x110c0000 0x20>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&xin24m>, <&cru PCLK_TIMER>;
+		clock-names = "timer", "pclk";
+	};
+
+	cru: clock-controller@110e0000 {
+		compatible = "rockchip,rk3228-cru";
+		reg = <0x110e0000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&cru PLL_GPLL>;
+		assigned-clock-rates = <594000000>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <100>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu_alert1: cpu_alert1 {
+					temperature = <75000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu_crit: cpu_crit {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT 6>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	tsadc: tsadc@11150000 {
+		compatible = "rockchip,rk3228-tsadc";
+		reg = <0x11150000 0x100>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_gpio>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_gpio>;
+		#thermal-sensor-cells = <0>;
+		rockchip,hw-tshut-temp = <95000>;
+		status = "disabled";
+	};
+
+	emmc: dwmmc@30020000 {
+		compatible = "rockchip,rk3288-dw-mshc";
+		reg = <0x30020000 0x4000>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <37500000>;
+		max-frequency = <37500000>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		bus-width = <8>;
+		default-sample-phase = <158>;
+		num-slots = <1>;
+		fifo-depth = <0x100>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+		status = "disabled";
+	};
+
+	gmac: ethernet@30200000 {
+		compatible = "rockchip,rk3228-gmac";
+		reg = <0x30200000 0x10000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>,
+			<&cru SCLK_MAC_TX>, <&cru SCLK_MAC_REF>,
+			<&cru SCLK_MAC_REFOUT>, <&cru ACLK_GMAC>,
+			<&cru PCLK_GMAC>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			"mac_clk_tx", "clk_mac_ref",
+			"clk_mac_refout", "aclk_mac",
+			"pclk_mac";
+		resets = <&cru SRST_GMAC>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@32010000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0x32011000 0x1000>,
+		      <0x32012000 0x1000>,
+		      <0x32014000 0x2000>,
+		      <0x32016000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3228-pinctrl";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@11110000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x11110000 0x100>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@11120000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x11120000 0x100>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@11130000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x11130000 0x100>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio3@11140000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x11140000 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma {
+			drive-strength = <12>;
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <1 22 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
+						<1 25 RK_FUNC_2 &pcfg_pull_none>,
+						<1 26 RK_FUNC_2 &pcfg_pull_none>,
+						<1 27 RK_FUNC_2 &pcfg_pull_none>,
+						<1 28 RK_FUNC_2 &pcfg_pull_none>,
+						<1 29 RK_FUNC_2 &pcfg_pull_none>,
+						<1 30 RK_FUNC_2 &pcfg_pull_none>,
+						<1 31 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		gmac {
+			rgmii_pins: rgmii-pins {
+				rockchip,pins = <2 14 RK_FUNC_1 &pcfg_pull_none>,
+						<2 12 RK_FUNC_1 &pcfg_pull_none>,
+						<2 25 RK_FUNC_1 &pcfg_pull_none>,
+						<2 19 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 18 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 22 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 23 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 9 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 13 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 17 RK_FUNC_1 &pcfg_pull_none>,
+						<2 16 RK_FUNC_1 &pcfg_pull_none>,
+						<2 21 RK_FUNC_2 &pcfg_pull_none>,
+						<2 20 RK_FUNC_2 &pcfg_pull_none>,
+						<2 11 RK_FUNC_1 &pcfg_pull_none>,
+						<2 8 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			rmii_pins: rmii-pins {
+				rockchip,pins = <2 14 RK_FUNC_1 &pcfg_pull_none>,
+						<2 12 RK_FUNC_1 &pcfg_pull_none>,
+						<2 25 RK_FUNC_1 &pcfg_pull_none>,
+						<2 19 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 18 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 13 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 17 RK_FUNC_1 &pcfg_pull_none>,
+						<2 16 RK_FUNC_1 &pcfg_pull_none>,
+						<2 8 RK_FUNC_1 &pcfg_pull_none>,
+						<2 15 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			phy_pins: phy-pins {
+				rockchip,pins = <2 14 RK_FUNC_2 &pcfg_pull_none>,
+						<2 8 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
+						<0 1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
+						<0 3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>,
+						<2 21 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <0 6 RK_FUNC_1 &pcfg_pull_none>,
+						<0 7 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s1 {
+			i2s1_bus: i2s1-bus {
+				rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_none>,
+						<0 9 RK_FUNC_1 &pcfg_pull_none>,
+						<0 11 RK_FUNC_1 &pcfg_pull_none>,
+						<0 12 RK_FUNC_1 &pcfg_pull_none>,
+						<0 13 RK_FUNC_1 &pcfg_pull_none>,
+						<0 14 RK_FUNC_1 &pcfg_pull_none>,
+						<1 2 RK_FUNC_1 &pcfg_pull_none>,
+						<1 4 RK_FUNC_1 &pcfg_pull_none>,
+						<1 5 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <3 21 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <0 30 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <1 12 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <1 11 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		tsadc {
+			otp_gpio: otp-gpio {
+				rockchip,pins = <0 24 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			otp_out: otp-out {
+				rockchip,pins = <0 24 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>,
+						<2 27 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <2 29 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <0 17 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <1 9 RK_FUNC_1 &pcfg_pull_none>,
+						<1 10 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <1 11 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
+						<1 19 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			uart2_cts: uart2-cts {
+				rockchip,pins = <0 25 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart2_rts: uart2-rts {
+				rockchip,pins = <0 24 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/src/arm/rk3288-evb-act8846.dts b/src/arm/rk3288-evb-act8846.dts
index 452ca2441e84..041dd5d2d18c 100644
--- a/src/arm/rk3288-evb-act8846.dts
+++ b/src/arm/rk3288-evb-act8846.dts
@@ -206,6 +206,10 @@
 	};
 };
 
+&panel {
+	power-supply = <&vcc_lcd>;
+};
+
 &pinctrl {
 	lcd {
 		lcd_en: lcd-en  {
diff --git a/src/arm/rk3288-evb-rk808.dts b/src/arm/rk3288-evb-rk808.dts
index 736b08b0bfdd..44ebc6e59b3a 100644
--- a/src/arm/rk3288-evb-rk808.dts
+++ b/src/arm/rk3288-evb-rk808.dts
@@ -233,3 +233,7 @@
 		};
 	};
 };
+
+&panel {
+	power-supply = <&vcc_lcd>;
+};
diff --git a/src/arm/rk3288-evb.dtsi b/src/arm/rk3288-evb.dtsi
index 963365d12208..bf7ccfad3260 100644
--- a/src/arm/rk3288-evb.dtsi
+++ b/src/arm/rk3288-evb.dtsi
@@ -43,12 +43,12 @@
 #include "rk3288.dtsi"
 
 / {
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000>;
 	};
 
-	backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
 		brightness-levels = <
 			  0   1   2   3   4   5   6   7
@@ -97,6 +97,21 @@
 		#clock-cells = <0>;
 	};
 
+	panel: panel {
+		compatible ="lg,lp079qx1-sp0v", "simple-panel";
+		backlight = <&backlight>;
+		enable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&lcd_cs>;
+
+		ports {
+			panel_in: port {
+				panel_in_edp: endpoint {
+					remote-endpoint = <&edp_out_panel>;
+				};
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
@@ -170,6 +185,28 @@
 	cpu0-supply = <&vdd_cpu>;
 };
 
+&edp {
+	force-hpd;
+	status = "okay";
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_out_panel: endpoint {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+&edp_phy {
+	status = "okay";
+};
+
 &emmc {
 	bus-width = <8>;
 	cap-mmc-highspeed;
@@ -280,6 +317,12 @@
 		};
 	};
 
+	lcd {
+		lcd_cs: lcd-cs {
+			rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		pmic_int: pmic-int {
 			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/src/arm/rk3288-fennec.dts b/src/arm/rk3288-fennec.dts
new file mode 100644
index 000000000000..805c0d26770b
--- /dev/null
+++ b/src/arm/rk3288-fennec.dts
@@ -0,0 +1,382 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3288.dtsi"
+
+/ {
+	model = "Rockchip RK3288 Fennec Board";
+	compatible = "rockchip,rk3288-fennec", "rockchip,rk3288";
+
+	memory@0 {
+		reg = <0x0 0x80000000>;
+		device_type = "memory";
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int &global_pwroff>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_io>;
+		vcc10-supply = <&vcc_io>;
+		vcc11-supply = <&vcc_io>;
+		vcc12-supply = <&vcc_io>;
+		vddio-supply = <&vcc_io>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_arm";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_33: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_33";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_wl: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_wl";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd10_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_lcd: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sd: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_lan: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_lan";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	gmac {
+		phy_int: phy-int {
+			rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_pmeb: phy-pmeb {
+			rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rst: phy-rst {
+			rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usbphy {
+		host_drv: host-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&host_drv>;
+	vbus_drv-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&usb_hsic {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/src/arm/rk3288-firefly-reload-core.dtsi b/src/arm/rk3288-firefly-reload-core.dtsi
new file mode 100644
index 000000000000..d242588bae0d
--- /dev/null
+++ b/src/arm/rk3288-firefly-reload-core.dtsi
@@ -0,0 +1,310 @@
+/*
+ * Device tree file for Firefly Rockchip RK3288 Core board
+ * Copyright (c) 2016 Randy Li <ayaka@soulik.info>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+#include "rk3288.dtsi"
+
+/ {
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x80000000>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+
+	vcc_flash: flash-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_flash";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_flash>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "ok";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x40>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-enable-ramp-delay = <300>;
+		regulator-ramp-delay = <8000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x41>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_vsel>, <&pwr_hold>;
+		system-power-controller;
+
+		vp1-supply = <&vcc_sys>;
+		vp2-supply = <&vcc_sys>;
+		vp3-supply = <&vcc_sys>;
+		vp4-supply = <&vcc_sys>;
+		inl1-supply = <&vcc_sys>;
+		inl2-supply = <&vcc_sys>;
+		inl3-supply = <&vcc_20>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "vcc_ddr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "vcc_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "vdd10_lcd";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			vcca_18: REG7  {
+				regulator-name = "vcca_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcca_33: REG8 {
+				regulator-name = "vcca_33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_lan: REG9 {
+				regulator-name = "vcca_lan";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vccio_wl: vcc_18: REG11 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "vcc18_lcd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&vccio_wl>;
+	bb-supply = <&vcc_io>;
+	dvp-supply = <&dovdd_1v8>;
+	flash0-supply = <&vcc_flash>;
+	flash1-supply = <&vcc_lan>;
+	gpio30-supply = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
+	lcdc-supply = <&vcc_io>;
+	sdcard-supply = <&vccio_sd>;
+	wifi-supply = <&vccio_wl>;
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
+		bias-pull-up;
+		drive-strength = <12>;
+	};
+
+	act8846 {
+		pwr_hold: pwr-hold {
+			rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		pmic_vsel: pmic-vsel {
+			rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	gmac {
+		phy_int: phy-int {
+			rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_pmeb: phy-pmeb {
+			rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rst: phy-rst {
+			rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/src/arm/rk3288-firefly-reload.dts b/src/arm/rk3288-firefly-reload.dts
new file mode 100644
index 000000000000..751bee81128e
--- /dev/null
+++ b/src/arm/rk3288-firefly-reload.dts
@@ -0,0 +1,403 @@
+/*
+ * Device tree file for Firefly Rockchip RK3288 Core board
+ * Copyright (c) 2016 Randy Li <ayaka@soulik.info>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-firefly-reload-core.dtsi"
+
+/ {
+	model = "Firefly-RK3288-reload";
+	compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			wakeup-source;
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwr_key>;
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			gpios = <&gpio8 2 GPIO_ACTIVE_LOW>;
+			label = "firefly:blue:power";
+			pinctrl-names = "default";
+			pinctrl-0 = <&power_led>;
+			panic-indicator;
+		};
+
+		work {
+			gpios = <&gpio8 1 GPIO_ACTIVE_LOW>;
+			label = "firefly:blue:user";
+			linux,default-trigger = "rc-feedback";
+			pinctrl-names = "default";
+			pinctrl-0 = <&work_led>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable>;
+		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+		simple-audio-card,dai-link@1 {  /* S/PDIF - S/PDIF */
+			cpu { sound-dai = <&spdif>; };
+			codec { sound-dai = <&spdif_out>; };
+		};
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	vcc_host_5v: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_5v>;
+	};
+
+	vcc_5v: vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_otg_5v: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc_otg_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_5v>;
+	};
+
+	dovdd_1v8: dovdd-1v8-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dvp_pwr>;
+		regulator-name = "dovdd_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc28_dvp: vcc28-dvp-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dvp_pwr>;
+		regulator-name = "vcc28_dvp";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	af_28: af_28-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dvp_pwr>;
+		regulator-name = "af_28";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	dvdd_1v2: af_28-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cif_pwr>;
+		regulator-name = "dvdd_1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vbat_wl: wifi-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat_wl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&i2c0 {
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		interrupt-parent = <&gpio7>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	codec: es8328@10 {
+		compatible = "everest,es8328";
+		DVDD-supply = <&vcca_33>;
+		AVDD-supply = <&vcca_33>;
+		PVDD-supply = <&vcca_33>;
+		HPVDD-supply = <&vcca_33>;
+		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+		clock-names = "i2s_hclk", "i2s_clk";
+		reg = <0x10>;
+	};
+};
+
+&i2s {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>, <&sdio0_int>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	vmmc-supply = <&vbat_wl>;
+	vqmmc-supply = <&vccio_wl>;
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usbhub_rst>;
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&pinctrl {
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	dvp {
+		dvp_pwr: dvp-pwr {
+			rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		cif_pwr: cif-pwr {
+			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		rtc_int: rtc-int {
+			rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		power_led: power-led {
+			rockchip,pins = <8 2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		work_led: work-led {
+			rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		/*
+		 * Default drive strength isn't enough to achieve even
+		 * high-speed mode on firefly board so bump up to 12ma.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio {
+		wifi_enable: wifi-enable {
+			rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_host {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usbhub_rst: usbhub-rst {
+			rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	usb_otg {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/src/arm/rk3288-firefly.dtsi b/src/arm/rk3288-firefly.dtsi
index d6cf9ada13c9..44935af1fb0e 100644
--- a/src/arm/rk3288-firefly.dtsi
+++ b/src/arm/rk3288-firefly.dtsi
@@ -44,7 +44,7 @@
 #include "rk3288.dtsi"
 
 / {
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x80000000>;
 	};
@@ -64,22 +64,6 @@
 		clock-output-names = "ext_gmac";
 	};
 
-	io_domains: io-domains {
-		compatible = "rockchip,rk3288-io-voltage-domain";
-		rockchip,grf = <&grf>;
-
-		audio-supply = <&vcca_33>;
-		bb-supply = <&vcc_io>;
-		dvp-supply = <&dovdd_1v8>;
-		flash0-supply = <&vcc_flash>;
-		flash1-supply = <&vcc_lan>;
-		gpio30-supply = <&vcc_io>;
-		gpio1830-supply = <&vcc_io>;
-		lcdc-supply = <&vcc_io>;
-		sdcard-supply = <&vccio_sd>;
-		wifi-supply = <&vccio_wl>;
-	};
-
 	ir: ir-receiver {
 		compatible = "gpio-ir-receiver";
 		pinctrl-names = "default";
@@ -397,6 +381,21 @@
 	status = "okay";
 };
 
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&vcca_33>;
+	bb-supply = <&vcc_io>;
+	dvp-supply = <&dovdd_1v8>;
+	flash0-supply = <&vcc_flash>;
+	flash1-supply = <&vcc_lan>;
+	gpio30-supply = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
+	lcdc-supply = <&vcc_io>;
+	sdcard-supply = <&vccio_sd>;
+	wifi-supply = <&vccio_wl>;
+};
+
 &pinctrl {
 	pcfg_output_high: pcfg-output-high {
 		output-high;
diff --git a/src/arm/rk3288-miqi.dts b/src/arm/rk3288-miqi.dts
index 8643103d8cd8..441d450fd151 100644
--- a/src/arm/rk3288-miqi.dts
+++ b/src/arm/rk3288-miqi.dts
@@ -52,7 +52,7 @@
 		stdout-path = "serial2:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x80000000>;
 	};
@@ -64,19 +64,6 @@
 		clock-output-names = "ext_gmac";
 	};
 
-	io_domains: io-domains {
-		compatible = "rockchip,rk3288-io-voltage-domain";
-
-		audio-supply = <&vcca_33>;
-		flash0-supply = <&vcc_flash>;
-		flash1-supply = <&vcc_lan>;
-		gpio30-supply = <&vcc_io>;
-		gpio1830-supply = <&vcc_io>;
-		lcdc-supply = <&vcc_io>;
-		sdcard-supply = <&vccio_sd>;
-		wifi-supply = <&vcc_18>;
-	};
-
 	leds {
 		compatible = "gpio-leds";
 
@@ -321,6 +308,19 @@
 	status = "okay";
 };
 
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&vcca_33>;
+	flash0-supply = <&vcc_flash>;
+	flash1-supply = <&vcc_lan>;
+	gpio30-supply = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
+	lcdc-supply = <&vcc_io>;
+	sdcard-supply = <&vccio_sd>;
+	wifi-supply = <&vcc_18>;
+};
+
 &pinctrl {
 	pcfg_output_high: pcfg-output-high {
 		output-high;
diff --git a/src/arm/rk3288-popmetal.dts b/src/arm/rk3288-popmetal.dts
index 720717bb3614..bc6d10054f6a 100644
--- a/src/arm/rk3288-popmetal.dts
+++ b/src/arm/rk3288-popmetal.dts
@@ -48,7 +48,7 @@
 	model = "PopMetal-RK3288";
 	compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
 
-	memory{
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x80000000>;
 	};
@@ -68,7 +68,7 @@
 		pinctrl-0 = <&pwrbtn>;
 
 		power {
-			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
@@ -77,25 +77,9 @@
 		};
 	};
 
-	io_domains: io-domains {
-		compatible = "rockchip,rk3288-io-voltage-domain";
-		rockchip,grf = <&grf>;
-
-		audio-supply = <&vcca_33>;
-		bb-supply = <&vcc_io>;
-		dvp-supply = <&vcc18_dvp>;
-		flash0-supply = <&vcc_flash>;
-		flash1-supply = <&vcc_lan>;
-		gpio30-supply = <&vcc_io>;
-		gpio1830-supply = <&vcc_io>;
-		lcdc-supply = <&vcc_io>;
-		sdcard-supply = <&vccio_sd>;
-		wifi-supply = <&vccio_wl>;
-	};
-
 	ir: ir-receiver {
 		compatible = "gpio-ir-receiver";
-		gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ir_int>;
 	};
@@ -110,7 +94,7 @@
 
 	vcc_sd: sdmmc-regulator {
 		compatible = "regulator-fixed";
-		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sdmmc_pwr>;
 		regulator-name = "vcc_sd";
@@ -144,7 +128,7 @@
 	vcc28_dvp: vcc28-dvp-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&dvp_pwr>;
 		regulator-name = "vcc28_dvp";
@@ -163,6 +147,8 @@
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
 	non-removable;
 	num-slots = <1>;
 	pinctrl-names = "default";
@@ -181,6 +167,10 @@
 	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
 	vmmc-supply = <&vcc_sd>;
 	vqmmc-supply = <&vccio_sd>;
 	status = "okay";
@@ -190,7 +180,7 @@
 	phy-supply = <&vcc_lan>;
 	phy-mode = "rgmii";
 	clock_in_out = "input";
-	snps,reset-gpio = <&gpio4 7 0>;
+	snps,reset-gpio = <&gpio4 RK_PB0 0>;
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 1000000>;
 	assigned-clocks = <&cru SCLK_MAC>;
@@ -296,7 +286,7 @@
 			vccio_sd: LDO_REG2 {
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-name = "vccio_sd";
 				regulator-state-mem {
@@ -403,12 +393,16 @@
 		interrupts = <1 IRQ_TYPE_EDGE_RISING>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&comp_int>;
+		vdd-supply = <&vcc_io>;
+		vid-supply = <&vcc_io>;
 	};
 
-	l3g4200d: l3g4200d@68 {
+	l3g4200d: l3g4200d@69 {
 		compatible = "st,l3g4200d-gyro";
 		st,drdy-int-pin = <2>;
-		reg = <0x6b>;
+		reg = <0x69>;
+		vdd-supply = <&vcc_io>;
+		vddio-supply = <&vcc_io>;
 	};
 
 	mma8452: mma8452@1d {
@@ -437,46 +431,61 @@
 	status = "okay";
 };
 
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&vcca_33>;
+	bb-supply = <&vcc_io>;
+	dvp-supply = <&vcc18_dvp>;
+	flash0-supply = <&vcc_flash>;
+	flash1-supply = <&vcc_lan>;
+	gpio30-supply = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
+	lcdc-supply = <&vcc_io>;
+	sdcard-supply = <&vccio_sd>;
+	wifi-supply = <&vccio_wl>;
+};
+
 &pinctrl {
 	ak8963 {
 		comp_int: comp-int {
-			rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	buttons {
 		pwrbtn: pwrbtn {
-			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	dvp {
 		dvp_pwr: dvp-pwr {
-			rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	ir {
 		ir_int: ir-int {
-			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	mma8452 {
 		gsensor_int: gsensor-int {
-			rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <8 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	pmic {
 		pmic_int: pmic-int {
-			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	sdmmc {
 		sdmmc_pwr: sdmmc-pwr {
-			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 };
@@ -526,3 +535,7 @@
 &usbphy {
 	status = "okay";
 };
+
+&usb_otg {
+	status = "okay";
+};
diff --git a/src/arm/rk3288-r89.dts b/src/arm/rk3288-r89.dts
index 4b8a8adb243c..04faa72dbd95 100644
--- a/src/arm/rk3288-r89.dts
+++ b/src/arm/rk3288-r89.dts
@@ -48,7 +48,7 @@
 / {
 	compatible = "netxeon,r89", "rockchip,rk3288";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000>;
 	};
diff --git a/src/arm/rk3288-rock2-som.dtsi b/src/arm/rk3288-rock2-som.dtsi
index e1ee9f949035..b25ba806d5ee 100644
--- a/src/arm/rk3288-rock2-som.dtsi
+++ b/src/arm/rk3288-rock2-som.dtsi
@@ -42,7 +42,7 @@
 #include "rk3288.dtsi"
 
 / {
-	memory {
+	memory@0 {
 		reg = <0x0 0x80000000>;
 		device_type = "memory";
 	};
@@ -61,22 +61,6 @@
 		clock-output-names = "ext_gmac";
 	};
 
-	io_domains: io-domains {
-		compatible = "rockchip,rk3288-io-voltage-domain";
-		rockchip,grf = <&grf>;
-
-		audio-supply = <&vcc_io>;
-		bb-supply = <&vcc_io>;
-		dvp-supply = <&vcc_18>;
-		flash0-supply = <&vcc_flash>;
-		flash1-supply = <&vccio_pmu>;
-		gpio30-supply = <&vccio_pmu>;
-		gpio1830 = <&vcc_io>;
-		lcdc-supply = <&vcc_io>;
-		sdcard-supply = <&vccio_sd>;
-		wifi-supply = <&vcc_18>;
-	};
-
 	vcc_flash: flash-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
@@ -259,6 +243,21 @@
 	};
 };
 
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&vcc_io>;
+	bb-supply = <&vcc_io>;
+	dvp-supply = <&vcc_18>;
+	flash0-supply = <&vcc_flash>;
+	flash1-supply = <&vccio_pmu>;
+	gpio30-supply = <&vccio_pmu>;
+	gpio1830 = <&vcc_io>;
+	lcdc-supply = <&vcc_io>;
+	sdcard-supply = <&vccio_sd>;
+	wifi-supply = <&vcc_18>;
+};
+
 &pinctrl {
 	pcfg_output_high: pcfg-output-high {
 		output-high;
diff --git a/src/arm/rk3288-veyron-analog-audio.dtsi b/src/arm/rk3288-veyron-analog-audio.dtsi
new file mode 100644
index 000000000000..6d105914a4f3
--- /dev/null
+++ b/src/arm/rk3288-veyron-analog-audio.dtsi
@@ -0,0 +1,101 @@
+/*
+ * Google Veyron (and derivatives) fragment for the  max98090 audio
+ * codec and analog headphone jack.
+ *
+ * Copyright 2016 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	sound {
+		compatible = "rockchip,rockchip-audio-max98090";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mic_det>, <&hp_det>;
+		rockchip,model = "VEYRON-I2S";
+		rockchip,i2s-controller = <&i2s>;
+		rockchip,audio-codec = <&max98090>;
+		rockchip,hp-det-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>;
+		rockchip,mic-det-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+		rockchip,headset-codec = <&headsetcodec>;
+	};
+};
+
+&i2c2 {
+	max98090: max98090@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		clock-names = "mclk";
+		clocks = <&cru SCLK_I2S0_OUT>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&int_codec>;
+	};
+};
+
+&i2c4 {
+	headsetcodec: ts3a227e@3b {
+		compatible = "ti,ts3a227e";
+		reg = <0x3b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts3a227e_int_l>;
+		ti,micbias = <7>;		/* MICBIAS = 2.8V */
+	};
+};
+
+&i2s {
+	status = "okay";
+};
+
+&io_domains {
+	audio-supply = <&vcc18_codec>;
+};
+
+&rk808 {
+	vcc10-supply = <&vcc33_sys>;
+
+	regulators {
+		vcc18_codec: LDO_REG6 {
+			regulator-name = "vcc18_codec";
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	codec {
+		hp_det: hp-det {
+			rockchip,pins = <6 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		/*
+		 * HACK: We're going to _pull down_ this _active low_ interrupt
+		 * so that it never fires.  We don't need this interrupt because
+		 * we've got a ts3a227e chip but the driver requires it.
+		 */
+		int_codec: int-codec {
+			rockchip,pins = <6 7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		mic_det: mic-det {
+			rockchip,pins = <6 11 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	headset {
+		ts3a227e_int_l: ts3a227e-int-l {
+			rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/src/arm/rk3288-veyron-chromebook.dtsi b/src/arm/rk3288-veyron-chromebook.dtsi
index 2958c36d12a0..ce1f87980bcb 100644
--- a/src/arm/rk3288-veyron-chromebook.dtsi
+++ b/src/arm/rk3288-veyron-chromebook.dtsi
@@ -46,6 +46,7 @@
 #include <dt-bindings/clock/rockchip,rk808.h>
 #include <dt-bindings/input/input.h>
 #include "rk3288-veyron.dtsi"
+#include "rk3288-veyron-analog-audio.dtsi"
 #include "rk3288-veyron-sdmmc.dtsi"
 
 / {
diff --git a/src/arm/rk3288-veyron.dtsi b/src/arm/rk3288-veyron.dtsi
index b2557bf5a58f..2251d28e9d2a 100644
--- a/src/arm/rk3288-veyron.dtsi
+++ b/src/arm/rk3288-veyron.dtsi
@@ -47,7 +47,7 @@
 #include "rk3288.dtsi"
 
 / {
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000>;
 	};
@@ -83,19 +83,6 @@
 		reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>;
 	};
 
-	io_domains: io-domains {
-		compatible = "rockchip,rk3288-io-voltage-domain";
-		rockchip,grf = <&grf>;
-
-		bb-supply = <&vcc33_io>;
-		dvp-supply = <&vcc_18>;
-		flash0-supply = <&vcc18_flashio>;
-		gpio1830-supply = <&vcc33_io>;
-		gpio30-supply = <&vcc33_io>;
-		lcdc-supply = <&vcc33_lcd>;
-		wifi-supply = <&vcc18_wl>;
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&rk808 RK808_CLKOUT1>;
@@ -355,6 +342,18 @@
 	i2c-scl-rising-time-ns = <1000>;
 };
 
+&io_domains {
+	status = "okay";
+
+	bb-supply = <&vcc33_io>;
+	dvp-supply = <&vcc_18>;
+	flash0-supply = <&vcc18_flashio>;
+	gpio1830-supply = <&vcc33_io>;
+	gpio30-supply = <&vcc33_io>;
+	lcdc-supply = <&vcc33_lcd>;
+	wifi-supply = <&vcc18_wl>;
+};
+
 &pwm1 {
 	status = "okay";
 };
@@ -383,6 +382,12 @@
 	status = "okay";
 
 	rx-sample-delay-ns = <12>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
 };
 
 &tsadc {
diff --git a/src/arm/rk3288.dtsi b/src/arm/rk3288.dtsi
index 3b44ef3cff12..4fad13368a7b 100644
--- a/src/arm/rk3288.dtsi
+++ b/src/arm/rk3288.dtsi
@@ -45,9 +45,12 @@
 #include <dt-bindings/clock/rk3288-cru.h>
 #include <dt-bindings/thermal/thermal.h>
 #include <dt-bindings/power/rk3288-power.h>
-#include "skeleton.dtsi"
+#include <dt-bindings/soc/rockchip,boot-mode.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	compatible = "rockchip,rk3288";
 
 	interrupt-parent = <&gic>;
@@ -226,7 +229,7 @@
 
 	sdmmc: dwmmc@ff0c0000 {
 		compatible = "rockchip,rk3288-dw-mshc";
-		clock-freq-min-max = <400000 150000000>;
+		max-frequency = <150000000>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
@@ -238,7 +241,7 @@
 
 	sdio0: dwmmc@ff0d0000 {
 		compatible = "rockchip,rk3288-dw-mshc";
-		clock-freq-min-max = <400000 150000000>;
+		max-frequency = <150000000>;
 		clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
 			 <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
@@ -250,7 +253,7 @@
 
 	sdio1: dwmmc@ff0e0000 {
 		compatible = "rockchip,rk3288-dw-mshc";
-		clock-freq-min-max = <400000 150000000>;
+		max-frequency = <150000000>;
 		clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>,
 			 <&cru SCLK_SDIO1_DRV>, <&cru SCLK_SDIO1_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
@@ -262,7 +265,7 @@
 
 	emmc: dwmmc@ff0f0000 {
 		compatible = "rockchip,rk3288-dw-mshc";
-		clock-freq-min-max = <400000 150000000>;
+		max-frequency = <150000000>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
@@ -279,6 +282,8 @@
 		#io-channel-cells = <1>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};
 
@@ -539,8 +544,9 @@
 	gmac: ethernet@ff290000 {
 		compatible = "rockchip,rk3288-gmac";
 		reg = <0xff290000 0x10000>;
-		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "macirq";
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq", "eth_wake_irq";
 		rockchip,grf = <&grf>;
 		clocks = <&cru SCLK_MAC>,
 			<&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
@@ -592,7 +598,6 @@
 		g-np-tx-fifo-size = <16>;
 		g-rx-fifo-size = <275>;
 		g-tx-fifo-size = <256 128 128 64 64 32>;
-		g-use-dma;
 		phys = <&usbphy0>;
 		phy-names = "usb2-phy";
 		status = "disabled";
@@ -790,6 +795,15 @@
 				clocks = <&cru ACLK_GPU>;
 			};
 		};
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x94>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+			mode-bootloader = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+		};
 	};
 
 	sgrf: syscon@ff740000 {
@@ -826,6 +840,42 @@
 			#phy-cells = <0>;
 			status = "disabled";
 		};
+
+		io_domains: io-domains {
+			compatible = "rockchip,rk3288-io-voltage-domain";
+			status = "disabled";
+		};
+
+		usbphy: usbphy {
+			compatible = "rockchip,rk3288-usb-phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			usbphy0: usb-phy@320 {
+				#phy-cells = <0>;
+				reg = <0x320>;
+				clocks = <&cru SCLK_OTGPHY0>;
+				clock-names = "phyclk";
+				#clock-cells = <0>;
+			};
+
+			usbphy1: usb-phy@334 {
+				#phy-cells = <0>;
+				reg = <0x334>;
+				clocks = <&cru SCLK_OTGPHY1>;
+				clock-names = "phyclk";
+				#clock-cells = <0>;
+			};
+
+			usbphy2: usb-phy@348 {
+				#phy-cells = <0>;
+				reg = <0x348>;
+				clocks = <&cru SCLK_OTGPHY2>;
+				clock-names = "phyclk";
+				#clock-cells = <0>;
+			};
+		};
 	};
 
 	wdt: watchdog@ff800000 {
@@ -1067,7 +1117,7 @@
 	};
 
 	efuse: efuse@ffb40000 {
-		compatible = "rockchip,rockchip-efuse";
+		compatible = "rockchip,rk3288-efuse";
 		reg = <0xffb40000 0x20>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1079,38 +1129,6 @@
 		};
 	};
 
-	usbphy: phy {
-		compatible = "rockchip,rk3288-usb-phy";
-		rockchip,grf = <&grf>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-
-		usbphy0: usb-phy@320 {
-			#phy-cells = <0>;
-			reg = <0x320>;
-			clocks = <&cru SCLK_OTGPHY0>;
-			clock-names = "phyclk";
-			#clock-cells = <0>;
-		};
-
-		usbphy1: usb-phy@334 {
-			#phy-cells = <0>;
-			reg = <0x334>;
-			clocks = <&cru SCLK_OTGPHY1>;
-			clock-names = "phyclk";
-			#clock-cells = <0>;
-		};
-
-		usbphy2: usb-phy@348 {
-			#phy-cells = <0>;
-			reg = <0x348>;
-			clocks = <&cru SCLK_OTGPHY2>;
-			clock-names = "phyclk";
-			#clock-cells = <0>;
-		};
-	};
-
 	pinctrl: pinctrl {
 		compatible = "rockchip,rk3288-pinctrl";
 		rockchip,grf = <&grf>;
diff --git a/src/arm/rk3xxx.dtsi b/src/arm/rk3xxx.dtsi
index 99bbcc2c9b89..0b45811cf28b 100644
--- a/src/arm/rk3xxx.dtsi
+++ b/src/arm/rk3xxx.dtsi
@@ -43,9 +43,12 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
+#include <dt-bindings/soc/rockchip,boot-mode.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	interrupt-parent = <&gic>;
 
 	aliases {
@@ -180,7 +183,6 @@
 		g-np-tx-fifo-size = <16>;
 		g-rx-fifo-size = <275>;
 		g-tx-fifo-size = <256 128 128 64 64 32>;
-		g-use-dma;
 		phys = <&usbphy0>;
 		phy-names = "usb2-phy";
 		status = "disabled";
@@ -246,8 +248,17 @@
 	};
 
 	pmu: pmu@20004000 {
-		compatible = "rockchip,rk3066-pmu", "syscon";
+		compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
 		reg = <0x20004000 0x100>;
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x40>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+			mode-bootloader = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+		};
 	};
 
 	grf: grf@20008000 {
@@ -399,6 +410,8 @@
 		#io-channel-cells = <1>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};
 
diff --git a/src/arm/s3c2416-pinctrl.dtsi b/src/arm/s3c2416-pinctrl.dtsi
index 527e3193817f..6274359fb323 100644
--- a/src/arm/s3c2416-pinctrl.dtsi
+++ b/src/arm/s3c2416-pinctrl.dtsi
@@ -8,6 +8,8 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/pinctrl/samsung.h>
+
 &pinctrl_0 {
 	/*
 	 * Pin banks
@@ -83,91 +85,91 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gph-0", "gph-1";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gph-8", "gph-9";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gph-2", "gph-3";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gph-10", "gph-11";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gph-4", "gph-5";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	uart2_fctl: uart2-fctl {
 		samsung,pins = "gph-6", "gph-7";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	uart3_data: uart3-data {
 		samsung,pins = "gph-6", "gph-7";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	extuart_clk: extuart-clk {
 		samsung,pins = "gph-12";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	i2c0_bus: i2c0-bus {
 		samsung,pins = "gpe-14", "gpe-15";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpe-11", "gpe-12", "gpe-13";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpe-5";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpe-6";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	sd0_bus1: sd0-bus1 {
 		samsung,pins = "gpe-7";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	sd0_bus4: sd0-bus4 {
 		samsung,pins = "gpe-8", "gpe-9", "gpe-10";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gpl-8";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	sd1_clk: sd1-clk {
 		samsung,pins = "gpl-9";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	sd1_bus1: sd1-bus1 {
 		samsung,pins = "gpl-0";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	sd1_bus4: sd1-bus4 {
 		samsung,pins = "gpl-1", "gpl-2", "gpl-3";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 };
diff --git a/src/arm/s3c6410-mini6410.dts b/src/arm/s3c6410-mini6410.dts
index a25debb50401..f4afda3594f8 100644
--- a/src/arm/s3c6410-mini6410.dts
+++ b/src/arm/s3c6410-mini6410.dts
@@ -201,13 +201,13 @@
 &pinctrl0 {
 	gpio_leds: gpio-leds {
 		samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	gpio_keys: gpio-keys {
 		samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3",
 				"gpn-4", "gpn-5", "gpl-11", "gpl-12";
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 };
 
diff --git a/src/arm/s3c64xx-pinctrl.dtsi b/src/arm/s3c64xx-pinctrl.dtsi
index b1197d8b04de..4e8e802b4ee1 100644
--- a/src/arm/s3c64xx-pinctrl.dtsi
+++ b/src/arm/s3c64xx-pinctrl.dtsi
@@ -12,9 +12,7 @@
  * published by the Free Software Foundation.
  */
 
-#define PIN_PULL_NONE	0
-#define PIN_PULL_DOWN	1
-#define PIN_PULL_UP	2
+#include <dt-bindings/pinctrl/samsung.h>
 
 &pinctrl0 {
 	/*
@@ -138,514 +136,514 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gpa-0", "gpa-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gpa-2", "gpa-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gpa-4", "gpa-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gpa-6", "gpa-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	uart3_data: uart3-data {
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	ext_dma_0: ext-dma-0 {
 		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	ext_dma_1: ext-dma-1 {
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	irda_data_0: irda-data-0 {
 		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	irda_data_1: irda-data-1 {
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	irda_sdbw: irda-sdbw {
 		samsung,pins = "gpb-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	i2c0_bus: i2c0-bus {
 		samsung,pins = "gpb-5", "gpb-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
 	i2c1_bus: i2c1-bus {
 		/* S3C6410-only */
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <6>;
-		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_6>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpc-0", "gpc-1", "gpc-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
 	spi0_cs: spi0-cs {
 		samsung,pins = "gpc-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	spi1_bus: spi1-bus {
 		samsung,pins = "gpc-4", "gpc-5", "gpc-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
 	spi1_cs: spi1-cs {
 		samsung,pins = "gpc-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpg-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpg-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd0_bus1: sd0-bus1 {
 		samsung,pins = "gpg-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd0_bus4: sd0-bus4 {
 		samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd0_cd: sd0-cd {
 		samsung,pins = "gpg-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gph-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd1_clk: sd1-clk {
 		samsung,pins = "gph-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd1_bus1: sd1-bus1 {
 		samsung,pins = "gph-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd1_bus4: sd1-bus4 {
 		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd1_bus8: sd1-bus8 {
 		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5",
 				"gph-6", "gph-7", "gph-8", "gph-9";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd1_cd: sd1-cd {
 		samsung,pins = "gpg-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpc-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd2_clk: sd2-clk {
 		samsung,pins = "gpc-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd2_bus1: sd2-bus1 {
 		samsung,pins = "gph-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd2_bus4: sd2-bus4 {
 		samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	i2s0_bus: i2s0-bus {
 		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	i2s0_cdclk: i2s0-cdclk {
 		samsung,pins = "gpd-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	i2s1_bus: i2s1-bus {
 		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	i2s1_cdclk: i2s1-cdclk {
 		samsung,pins = "gpe-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	i2s2_bus: i2s2-bus {
 		/* S3C6410-only */
 		samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6",
 				"gph-8", "gph-9";
-		samsung,pin-function = <5>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	i2s2_cdclk: i2s2-cdclk {
 		/* S3C6410-only */
 		samsung,pins = "gph-7";
-		samsung,pin-function = <5>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	pcm0_bus: pcm0-bus {
 		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	pcm0_extclk: pcm0-extclk {
 		samsung,pins = "gpd-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	pcm1_bus: pcm1-bus {
 		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	pcm1_extclk: pcm1-extclk {
 		samsung,pins = "gpe-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	ac97_bus_0: ac97-bus-0 {
 		samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	ac97_bus_1: ac97-bus-1 {
 		samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	cam_port: cam-port {
 		samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4",
 				"gpf-5", "gpf-6", "gpf-7", "gpf-8",
 				"gpf-9", "gpf-10", "gpf-11", "gpf-12";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	cam_rst: cam-rst {
 		samsung,pins = "gpf-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	cam_field: cam-field {
 		/* S3C6410-only */
 		samsung,pins = "gpb-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	pwm_extclk: pwm-extclk {
 		samsung,pins = "gpf-13";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	pwm0_out: pwm0-out {
 		samsung,pins = "gpf-14";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	pwm1_out: pwm1-out {
 		samsung,pins = "gpf-15";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	clkout0: clkout-0 {
 		samsung,pins = "gpf-14";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col0_0: keypad-col0-0 {
 		samsung,pins = "gph-0";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col1_0: keypad-col1-0 {
 		samsung,pins = "gph-1";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col2_0: keypad-col2-0 {
 		samsung,pins = "gph-2";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col3_0: keypad-col3-0 {
 		samsung,pins = "gph-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col4_0: keypad-col4-0 {
 		samsung,pins = "gph-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col5_0: keypad-col5-0 {
 		samsung,pins = "gph-5";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col6_0: keypad-col6-0 {
 		samsung,pins = "gph-6";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col7_0: keypad-col7-0 {
 		samsung,pins = "gph-7";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col0_1: keypad-col0-1 {
 		samsung,pins = "gpl-0";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col1_1: keypad-col1-1 {
 		samsung,pins = "gpl-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col2_1: keypad-col2-1 {
 		samsung,pins = "gpl-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col3_1: keypad-col3-1 {
 		samsung,pins = "gpl-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col4_1: keypad-col4-1 {
 		samsung,pins = "gpl-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col5_1: keypad-col5-1 {
 		samsung,pins = "gpl-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col6_1: keypad-col6-1 {
 		samsung,pins = "gpl-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col7_1: keypad-col7-1 {
 		samsung,pins = "gpl-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row0_0: keypad-row0-0 {
 		samsung,pins = "gpk-8";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row1_0: keypad-row1-0 {
 		samsung,pins = "gpk-9";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row2_0: keypad-row2-0 {
 		samsung,pins = "gpk-10";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row3_0: keypad-row3-0 {
 		samsung,pins = "gpk-11";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row4_0: keypad-row4-0 {
 		samsung,pins = "gpk-12";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row5_0: keypad-row5-0 {
 		samsung,pins = "gpk-13";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row6_0: keypad-row6-0 {
 		samsung,pins = "gpk-14";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row7_0: keypad-row7-0 {
 		samsung,pins = "gpk-15";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row0_1: keypad-row0-1 {
 		samsung,pins = "gpn-0";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row1_1: keypad-row1-1 {
 		samsung,pins = "gpn-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row2_1: keypad-row2-1 {
 		samsung,pins = "gpn-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row3_1: keypad-row3-1 {
 		samsung,pins = "gpn-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row4_1: keypad-row4-1 {
 		samsung,pins = "gpn-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row5_1: keypad-row5-1 {
 		samsung,pins = "gpn-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row6_1: keypad-row6-1 {
 		samsung,pins = "gpn-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row7_1: keypad-row7-1 {
 		samsung,pins = "gpn-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	lcd_ctrl: lcd-ctrl {
 		samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	lcd_data16: lcd-data-width16 {
@@ -653,8 +651,8 @@
 				"gpi-7", "gpi-10", "gpi-11", "gpi-12",
 				"gpi-13", "gpi-14", "gpi-15", "gpj-3",
 				"gpj-4", "gpj-5", "gpj-6", "gpj-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	lcd_data18: lcd-data-width18 {
@@ -663,8 +661,8 @@
 				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
 				"gpj-2", "gpj-3", "gpj-4", "gpj-5",
 				"gpj-6", "gpj-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	lcd_data24: lcd-data-width24 {
@@ -674,14 +672,14 @@
 				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
 				"gpj-0", "gpj-1", "gpj-2", "gpj-3",
 				"gpj-4", "gpj-5", "gpj-6", "gpj-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	hsi_bus: hsi-bus {
 		samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3",
 				"gpk-4", "gpk-5", "gpk-6", "gpk-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 };
diff --git a/src/arm/s5pv210-aquila.dts b/src/arm/s5pv210-aquila.dts
index da24ab570b0e..40139923eef0 100644
--- a/src/arm/s5pv210-aquila.dts
+++ b/src/arm/s5pv210-aquila.dts
@@ -29,7 +29,7 @@
 		bootargs = "console=ttySAC2,115200n8 root=/dev/mmcblk1p5 rw rootwait ignore_loglevel earlyprintk";
 	};
 
-	memory {
+	memory@30000000 {
 		device_type = "memory";
 		reg = <0x30000000 0x05000000
 			0x40000000 0x18000000>;
@@ -387,7 +387,7 @@
 &pinctrl0 {
 	t_flash_detect: t-flash-detect {
 		samsung,pins = "gph3-4";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 };
diff --git a/src/arm/s5pv210-goni.dts b/src/arm/s5pv210-goni.dts
index 0a33d402138e..c56f51ee7897 100644
--- a/src/arm/s5pv210-goni.dts
+++ b/src/arm/s5pv210-goni.dts
@@ -29,7 +29,7 @@
 		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p5 rw rootwait ignore_loglevel earlyprintk";
 	};
 
-	memory {
+	memory@30000000 {
 		device_type = "memory";
 		reg = <0x30000000 0x05000000
 			0x40000000 0x10000000
diff --git a/src/arm/s5pv210-pinctrl.dtsi b/src/arm/s5pv210-pinctrl.dtsi
index 8c714088e3c6..9a3e851e2e22 100644
--- a/src/arm/s5pv210-pinctrl.dtsi
+++ b/src/arm/s5pv210-pinctrl.dtsi
@@ -19,6 +19,8 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/pinctrl/samsung.h>
+
 &pinctrl0 {
 	gpa0: gpa0 {
 		gpio-controller;
@@ -270,559 +272,559 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart2_fctl: uart2-fctl {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart3_data: uart3-data {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart_audio: uart-audio {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi1_bus: spi1-bus {
 		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s0_bus: i2s0-bus {
 		samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
 				"gpi-4", "gpi-5", "gpi-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s1_bus: i2s1-bus {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s2_bus: i2s2-bus {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pcm1_bus: pcm1-bus {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	ac97_bus: ac97-bus {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s2_bus: i2s2-bus {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pcm2_bus: pcm2-bus {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spdif_bus: spdif-bus {
 		samsung,pins = "gpc1-0", "gpc1-1";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi2_bus: spi2-bus {
 		samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
-		samsung,pin-function = <5>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c0_bus: i2c0-bus {
 		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c1_bus: i2c1-bus {
 		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c2_bus: i2c2-bus {
 		samsung,pins = "gpd1-4", "gpd1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm0_out: pwm0-out {
 		samsung,pins = "gpd0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm1_out: pwm1-out {
 		samsung,pins = "gpd0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm2_out: pwm2-out {
 		samsung,pins = "gpd0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm3_out: pwm3-out {
 		samsung,pins = "gpd0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_row0: keypad-row-0 {
 		samsung,pins = "gph3-0";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_row1: keypad-row-1 {
 		samsung,pins = "gph3-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_row2: keypad-row-2 {
 		samsung,pins = "gph3-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_row3: keypad-row-3 {
 		samsung,pins = "gph3-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_row4: keypad-row-4 {
 		samsung,pins = "gph3-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_row5: keypad-row-5 {
 		samsung,pins = "gph3-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_row6: keypad-row-6 {
 		samsung,pins = "gph3-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_row7: keypad-row-7 {
 		samsung,pins = "gph3-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_col0: keypad-col-0 {
 		samsung,pins = "gph2-0";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_col1: keypad-col-1 {
 		samsung,pins = "gph2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_col2: keypad-col-2 {
 		samsung,pins = "gph2-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_col3: keypad-col-3 {
 		samsung,pins = "gph2-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_col4: keypad-col-4 {
 		samsung,pins = "gph2-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_col5: keypad-col-5 {
 		samsung,pins = "gph2-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_col6: keypad-col-6 {
 		samsung,pins = "gph2-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_col7: keypad-col-7 {
 		samsung,pins = "gph2-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpg0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpg0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_cd: sd0-cd {
 		samsung,pins = "gpg0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus1: sd0-bus-width1 {
 		samsung,pins = "gpg0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus4: sd0-bus-width4 {
 		samsung,pins = "gpg0-3", "gpg0-4", "gpg0-5", "gpg0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus8: sd0-bus-width8 {
 		samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_clk: sd1-clk {
 		samsung,pins = "gpg1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gpg1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_cd: sd1-cd {
 		samsung,pins = "gpg1-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
 		samsung,pins = "gpg1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
 		samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_clk: sd2-clk {
 		samsung,pins = "gpg2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpg2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cd: sd2-cd {
 		samsung,pins = "gpg2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus1: sd2-bus-width1 {
 		samsung,pins = "gpg2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus4: sd2-bus-width4 {
 		samsung,pins = "gpg2-3", "gpg2-4", "gpg2-5", "gpg2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus8: sd2-bus-width8 {
 		samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_clk: sd3-clk {
 		samsung,pins = "gpg3-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_cmd: sd3-cmd {
 		samsung,pins = "gpg3-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_cd: sd3-cd {
 		samsung,pins = "gpg3-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_bus1: sd3-bus-width1 {
 		samsung,pins = "gpg3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_bus4: sd3-bus-width4 {
 		samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	eint0: ext-int0 {
 		samsung,pins = "gph0-0";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	eint8: ext-int8 {
 		samsung,pins = "gph1-0";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	eint15: ext-int15 {
 		samsung,pins = "gph1-7";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	eint16: ext-int16 {
 		samsung,pins = "gph2-0";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	eint31: ext-int31 {
 		samsung,pins = "gph3-7";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_port_a_io: cam-port-a-io {
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 				"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 				"gpe1-0", "gpe1-1", "gpe1-2", "gpe1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_port_a_clk_active: cam-port-a-clk-active {
 		samsung,pins = "gpe1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	cam_port_a_clk_idle: cam-port-a-clk-idle {
 		samsung,pins = "gpe1-3";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_port_b_io: cam-port-b-io {
 		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
 				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
 				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_port_b_clk_active: cam-port-b-clk-active {
 		samsung,pins = "gpj1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	cam_port_b_clk_idle: cam-port-b-clk-idle {
 		samsung,pins = "gpj1-3";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 		lcd_ctrl: lcd-ctrl {
 		samsung,pins = "gpd0-0", "gpd0-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	lcd_sync: lcd-sync {
 		samsung,pins = "gpf0-0", "gpf0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	lcd_clk: lcd-clk {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	lcd_data24: lcd-data-width24 {
@@ -832,8 +834,8 @@
 				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
 				"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
 				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
diff --git a/src/arm/s5pv210-smdkc110.dts b/src/arm/s5pv210-smdkc110.dts
index 1eedab7ffe94..5d14da911aa5 100644
--- a/src/arm/s5pv210-smdkc110.dts
+++ b/src/arm/s5pv210-smdkc110.dts
@@ -29,7 +29,7 @@
 		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
 	};
 
-	memory {
+	memory@20000000 {
 		device_type = "memory";
 		reg = <0x20000000 0x20000000>;
 	};
diff --git a/src/arm/s5pv210-smdkv210.dts b/src/arm/s5pv210-smdkv210.dts
index 9eb6aff3e38f..75398318ed57 100644
--- a/src/arm/s5pv210-smdkv210.dts
+++ b/src/arm/s5pv210-smdkv210.dts
@@ -29,7 +29,7 @@
 		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
 	};
 
-	memory {
+	memory@20000000 {
 		device_type = "memory";
 		reg = <0x20000000 0x40000000>;
 	};
diff --git a/src/arm/s5pv210-torbreck.dts b/src/arm/s5pv210-torbreck.dts
index 622599fd2cfa..7cb50bcee888 100644
--- a/src/arm/s5pv210-torbreck.dts
+++ b/src/arm/s5pv210-torbreck.dts
@@ -29,7 +29,7 @@
 		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
 	};
 
-	memory {
+	memory@20000000 {
 		device_type = "memory";
 		reg = <0x20000000 0x20000000>;
 	};
diff --git a/src/arm/s5pv210.dtsi b/src/arm/s5pv210.dtsi
index ffc36bd24d2f..a853918be43f 100644
--- a/src/arm/s5pv210.dtsi
+++ b/src/arm/s5pv210.dtsi
@@ -19,11 +19,13 @@
  * published by the Free Software Foundation.
 */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/s5pv210.h>
 #include <dt-bindings/clock/s5pv210-audss.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		csis0 = &csis0;
 		fimc0 = &fimc0;
diff --git a/src/arm/sama5d2.dtsi b/src/arm/sama5d2.dtsi
index 2827e7ab5ebc..ceb9783ff7e1 100644
--- a/src/arm/sama5d2.dtsi
+++ b/src/arm/sama5d2.dtsi
@@ -72,6 +72,40 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	etb {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0x740000 0x1000>;
+
+		clocks = <&mck>;
+		clock-names = "apb_pclk";
+
+		port {
+			etb_in: endpoint {
+				slave-mode;
+				remote-endpoint = <&etm_out>;
+			};
+		};
+	};
+
+	etm {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0x73C000 0x1000>;
+
+		clocks = <&mck>;
+		clock-names = "apb_pclk";
+
+		port {
+			etm_out: endpoint {
+				remote-endpoint = <&etb_in>;
+			};
+		};
+	};
+
 	memory {
 		reg = <0x20000000 0x20000000>;
 	};
@@ -112,13 +146,13 @@
 			clock-names = "pclk", "hclk";
 			status = "disabled";
 
-			ep0 {
+			ep@0 {
 				reg = <0>;
 				atmel,fifo-size = <64>;
 				atmel,nb-banks = <1>;
 			};
 
-			ep1 {
+			ep@1 {
 				reg = <1>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <3>;
@@ -126,7 +160,7 @@
 				atmel,can-isoc;
 			};
 
-			ep2 {
+			ep@2 {
 				reg = <2>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <3>;
@@ -134,7 +168,7 @@
 				atmel,can-isoc;
 			};
 
-			ep3 {
+			ep@3 {
 				reg = <3>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -142,7 +176,7 @@
 				atmel,can-isoc;
 			};
 
-			ep4 {
+			ep@4 {
 				reg = <4>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -150,7 +184,7 @@
 				atmel,can-isoc;
 			};
 
-			ep5 {
+			ep@5 {
 				reg = <5>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -158,7 +192,7 @@
 				atmel,can-isoc;
 			};
 
-			ep6 {
+			ep@6 {
 				reg = <6>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -166,7 +200,7 @@
 				atmel,can-isoc;
 			};
 
-			ep7 {
+			ep@7 {
 				reg = <7>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -174,56 +208,56 @@
 				atmel,can-isoc;
 			};
 
-			ep8 {
+			ep@8 {
 				reg = <8>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep9 {
+			ep@9 {
 				reg = <9>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep10 {
+			ep@10 {
 				reg = <10>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep11 {
+			ep@11 {
 				reg = <11>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep12 {
+			ep@12 {
 				reg = <12>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep13 {
+			ep@13 {
 				reg = <13>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep14 {
+			ep@14 {
 				reg = <14>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep15 {
+			ep@15 {
 				reg = <15>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -232,7 +266,7 @@
 		};
 
 		usb1: ohci@00400000 {
-			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			compatible = "atmel,sama5d2-ohci", "usb-ohci";
 			reg = <0x00400000 0x100000>;
 			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
 			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
@@ -701,6 +735,11 @@
 						atmel,clk-output-range = <0 83000000>;
 					};
 
+					securam_clk: securam_clk {
+						#clock-cells = <0>;
+						reg = <51>;
+					};
+
 					i2s0_clk: i2s0_clk {
 						#clock-cells = <0>;
 						reg = <54>;
@@ -996,6 +1035,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&twi0_clk>;
+				atmel,fifo-size = <16>;
 				status = "disabled";
 			};
 
@@ -1024,6 +1064,15 @@
 				status = "disabled";
 			};
 
+			securam: sram@f8044000 {
+				compatible = "atmel,sama5d2-securam", "mmio-sram";
+				reg = <0xf8044000 0x1420>;
+				clocks = <&securam_clk>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0xf8044000 0x1420>;
+			};
+
 			rstc@f8048000 {
 				compatible = "atmel,sama5d3-rstc";
 				reg = <0xf8048000 0x10>;
@@ -1054,30 +1103,12 @@
 				status = "disabled";
 			};
 
-			sckc@f8048050 {
-				compatible = "atmel,at91sam9x5-sckc";
+			clk32k: sckc@f8048050 {
+				compatible = "atmel,sama5d4-sckc";
 				reg = <0xf8048050 0x4>;
 
-				slow_rc_osc: slow_rc_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
-					#clock-cells = <0>;
-					clock-frequency = <32768>;
-					clock-accuracy = <250000000>;
-					atmel,startup-time-usec = <75>;
-				};
-
-				slow_osc: slow_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-osc";
-					#clock-cells = <0>;
-					clocks = <&slow_xtal>;
-					atmel,startup-time-usec = <1200000>;
-				};
-
-				clk32k: slowck {
-					compatible = "atmel,at91sam9x5-clk-slow";
-					#clock-cells = <0>;
-					clocks = <&slow_rc_osc &slow_osc>;
-				};
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
 			};
 
 			rtc@f80480b0 {
@@ -1197,6 +1228,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&twi1_clk>;
+				atmel,fifo-size = <16>;
 				status = "disabled";
 			};
 
@@ -1226,6 +1258,11 @@
 				clocks = <&pioA_clk>;
 			};
 
+			secumod@fc040000 {
+				compatible = "atmel,sama5d2-secumod", "syscon";
+				reg = <0xfc040000 0x100>;
+			};
+
 			tdes@fc044000 {
 				compatible = "atmel,at91sam9g46-tdes";
 				reg = <0xfc044000 0x100>;
diff --git a/src/arm/sama5d3.dtsi b/src/arm/sama5d3.dtsi
index 36301bd9a14a..b06448ba6649 100644
--- a/src/arm/sama5d3.dtsi
+++ b/src/arm/sama5d3.dtsi
@@ -326,26 +326,22 @@
 				atmel,adc-res-names = "lowres", "highres";
 				status = "disabled";
 
-				trigger@0 {
-					reg = <0>;
+				trigger0 {
 					trigger-name = "external-rising";
 					trigger-value = <0x1>;
 					trigger-external;
 				};
-				trigger@1 {
-					reg = <1>;
+				trigger1 {
 					trigger-name = "external-falling";
 					trigger-value = <0x2>;
 					trigger-external;
 				};
-				trigger@2 {
-					reg = <2>;
+				trigger2 {
 					trigger-name = "external-any";
 					trigger-value = <0x3>;
 					trigger-external;
 				};
-				trigger@3 {
-					reg = <3>;
+				trigger3 {
 					trigger-name = "continuous";
 					trigger-value = <0x6>;
 				};
@@ -553,8 +549,8 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB30 periph A */
-							 AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB31 periph A with pullup */
+							<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
@@ -1341,13 +1337,13 @@
 			clock-names = "pclk", "hclk";
 			status = "disabled";
 
-			ep0 {
+			ep@0 {
 				reg = <0>;
 				atmel,fifo-size = <64>;
 				atmel,nb-banks = <1>;
 			};
 
-			ep1 {
+			ep@1 {
 				reg = <1>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <3>;
@@ -1355,7 +1351,7 @@
 				atmel,can-isoc;
 			};
 
-			ep2 {
+			ep@2 {
 				reg = <2>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <3>;
@@ -1363,84 +1359,84 @@
 				atmel,can-isoc;
 			};
 
-			ep3 {
+			ep@3 {
 				reg = <3>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-dma;
 			};
 
-			ep4 {
+			ep@4 {
 				reg = <4>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-dma;
 			};
 
-			ep5 {
+			ep@5 {
 				reg = <5>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-dma;
 			};
 
-			ep6 {
+			ep@6 {
 				reg = <6>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-dma;
 			};
 
-			ep7 {
+			ep@7 {
 				reg = <7>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-dma;
 			};
 
-			ep8 {
+			ep@8 {
 				reg = <8>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 			};
 
-			ep9 {
+			ep@9 {
 				reg = <9>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 			};
 
-			ep10 {
+			ep@10 {
 				reg = <10>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 			};
 
-			ep11 {
+			ep@11 {
 				reg = <11>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 			};
 
-			ep12 {
+			ep@12 {
 				reg = <12>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 			};
 
-			ep13 {
+			ep@13 {
 				reg = <13>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 			};
 
-			ep14 {
+			ep@14 {
 				reg = <14>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 			};
 
-			ep15 {
+			ep@15 {
 				reg = <15>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
diff --git a/src/arm/sama5d31ek.dts b/src/arm/sama5d31ek.dts
index 04eec0dfcf7d..25e4c0b2d786 100644
--- a/src/arm/sama5d31ek.dts
+++ b/src/arm/sama5d31ek.dts
@@ -9,6 +9,7 @@
 /dts-v1/;
 #include "sama5d31.dtsi"
 #include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_emac.dtsi"
 #include "sama5d3xdm.dtsi"
 
 / {
diff --git a/src/arm/sama5d33ek.dts b/src/arm/sama5d33ek.dts
index cbd6a3ff1545..c517b87a1de2 100644
--- a/src/arm/sama5d33ek.dts
+++ b/src/arm/sama5d33ek.dts
@@ -9,6 +9,7 @@
 /dts-v1/;
 #include "sama5d33.dtsi"
 #include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
 #include "sama5d3xdm.dtsi"
 
 / {
diff --git a/src/arm/sama5d34ek.dts b/src/arm/sama5d34ek.dts
index 878aa164275a..c8b8449fdc3e 100644
--- a/src/arm/sama5d34ek.dts
+++ b/src/arm/sama5d34ek.dts
@@ -9,6 +9,7 @@
 /dts-v1/;
 #include "sama5d34.dtsi"
 #include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
 #include "sama5d3xdm.dtsi"
 
 / {
diff --git a/src/arm/sama5d35ek.dts b/src/arm/sama5d35ek.dts
index e812f5c1bf70..6e261fcf576c 100644
--- a/src/arm/sama5d35ek.dts
+++ b/src/arm/sama5d35ek.dts
@@ -9,6 +9,8 @@
 /dts-v1/;
 #include "sama5d35.dtsi"
 #include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_emac.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
 
 / {
 	model = "Atmel SAMA5D35-EK";
diff --git a/src/arm/sama5d36ek.dts b/src/arm/sama5d36ek.dts
index 59576c6f9826..cd458b85a205 100644
--- a/src/arm/sama5d36ek.dts
+++ b/src/arm/sama5d36ek.dts
@@ -10,6 +10,8 @@
 #include "sama5d36.dtsi"
 #include "sama5d3xmb.dtsi"
 #include "sama5d3xdm.dtsi"
+#include "sama5d3xmb_emac.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
 
 / {
 	model = "Atmel SAMA5D36-EK";
diff --git a/src/arm/sama5d3xcm.dtsi b/src/arm/sama5d3xcm.dtsi
index 2cf9c3611db6..b5e111b29da1 100644
--- a/src/arm/sama5d3xcm.dtsi
+++ b/src/arm/sama5d3xcm.dtsi
@@ -34,40 +34,6 @@
 			spi0: spi@f0004000 {
 				cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
 			};
-
-			macb0: ethernet@f0028000 {
-				phy-mode = "rgmii";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethernet-phy@1 {
-					reg = <0x1>;
-					interrupt-parent = <&pioB>;
-					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
-					txen-skew-ps = <800>;
-					txc-skew-ps = <3000>;
-					rxdv-skew-ps = <400>;
-					rxc-skew-ps = <3000>;
-					rxd0-skew-ps = <400>;
-					rxd1-skew-ps = <400>;
-					rxd2-skew-ps = <400>;
-					rxd3-skew-ps = <400>;
-				};
-
-				ethernet-phy@7 {
-					reg = <0x7>;
-					interrupt-parent = <&pioB>;
-					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
-					txen-skew-ps = <800>;
-					txc-skew-ps = <3000>;
-					rxdv-skew-ps = <400>;
-					rxc-skew-ps = <3000>;
-					rxd0-skew-ps = <400>;
-					rxd1-skew-ps = <400>;
-					rxd2-skew-ps = <400>;
-					rxd3-skew-ps = <400>;
-				};
-			};
 		};
 
 		nand0: nand@60000000 {
diff --git a/src/arm/sama5d3xmb.dtsi b/src/arm/sama5d3xmb.dtsi
index 89010422812d..6d252ad050f6 100644
--- a/src/arm/sama5d3xmb.dtsi
+++ b/src/arm/sama5d3xmb.dtsi
@@ -117,18 +117,6 @@
 				status = "okay";
 			};
 
-			macb1: ethernet@f802c000 {
-				phy-mode = "rmii";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-				phy0: ethernet-phy@1 {
-					interrupt-parent = <&pioE>;
-					interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
-					reg = <1>;
-				};
-			};
-
 			pinctrl@fffff200 {
 				board {
 					pinctrl_mmc0_cd: mmc0_cd {
diff --git a/src/arm/sama5d3xmb_emac.dtsi b/src/arm/sama5d3xmb_emac.dtsi
new file mode 100644
index 000000000000..2fd14f371a04
--- /dev/null
+++ b/src/arm/sama5d3xmb_emac.dtsi
@@ -0,0 +1,26 @@
+/*
+ * sama5d3xmb_emac.dts - Device Tree Include file for SAMA5D3x mother board
+ * Ethernet
+ *
+ *  Copyright (C) 2016 Atmel,
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	ahb {
+		apb {
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&pioE>;
+					interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+					reg = <1>;
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/sama5d3xmb_gmac.dtsi b/src/arm/sama5d3xmb_gmac.dtsi
new file mode 100644
index 000000000000..65aea7a75b1d
--- /dev/null
+++ b/src/arm/sama5d3xmb_gmac.dtsi
@@ -0,0 +1,48 @@
+/*
+ * sama5d3xmb_gmac.dtsi - Device Tree Include file for SAMA5D3x motherboard
+ * Gigabit Ethernet
+ *
+ *  Copyright (C) 2016 Atmel,
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	ahb {
+		apb {
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/sama5d4.dtsi b/src/arm/sama5d4.dtsi
index 4e2cc30d6615..4f60c1b7b137 100644
--- a/src/arm/sama5d4.dtsi
+++ b/src/arm/sama5d4.dtsi
@@ -135,13 +135,13 @@
 			clock-names = "pclk", "hclk";
 			status = "disabled";
 
-			ep0 {
+			ep@0 {
 				reg = <0>;
 				atmel,fifo-size = <64>;
 				atmel,nb-banks = <1>;
 			};
 
-			ep1 {
+			ep@1 {
 				reg = <1>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <3>;
@@ -149,7 +149,7 @@
 				atmel,can-isoc;
 			};
 
-			ep2 {
+			ep@2 {
 				reg = <2>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <3>;
@@ -157,7 +157,7 @@
 				atmel,can-isoc;
 			};
 
-			ep3 {
+			ep@3 {
 				reg = <3>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -165,7 +165,7 @@
 				atmel,can-isoc;
 			};
 
-			ep4 {
+			ep@4 {
 				reg = <4>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -173,7 +173,7 @@
 				atmel,can-isoc;
 			};
 
-			ep5 {
+			ep@5 {
 				reg = <5>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -181,7 +181,7 @@
 				atmel,can-isoc;
 			};
 
-			ep6 {
+			ep@6 {
 				reg = <6>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -189,7 +189,7 @@
 				atmel,can-isoc;
 			};
 
-			ep7 {
+			ep@7 {
 				reg = <7>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -197,56 +197,56 @@
 				atmel,can-isoc;
 			};
 
-			ep8 {
+			ep@8 {
 				reg = <8>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep9 {
+			ep@9 {
 				reg = <9>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep10 {
+			ep@10 {
 				reg = <10>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep11 {
+			ep@11 {
 				reg = <11>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep12 {
+			ep@12 {
 				reg = <12>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep13 {
+			ep@13 {
 				reg = <13>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep14 {
+			ep@14 {
 				reg = <14>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep15 {
+			ep@15 {
 				reg = <15>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -1226,22 +1226,22 @@
 				atmel,adc-ts-pressure-threshold = <10000>;
 				status = "disabled";
 
-				trigger@0 {
+				trigger0 {
 					trigger-name = "external-rising";
 					trigger-value = <0x1>;
 					trigger-external;
 				};
-				trigger@1 {
+				trigger1 {
 					trigger-name = "external-falling";
 					trigger-value = <0x2>;
 					trigger-external;
 				};
-				trigger@2 {
+				trigger2 {
 					trigger-name = "external-any";
 					trigger-value = <0x3>;
 					trigger-external;
 				};
-				trigger@3 {
+				trigger3 {
 					trigger-name = "continuous";
 					trigger-value = <0x6>;
 				};
@@ -1314,30 +1314,11 @@
 				status = "disabled";
 			};
 
-			sckc@fc068650 {
-				compatible = "atmel,at91sam9x5-sckc";
+			clk32k: sckc@fc068650 {
+				compatible = "atmel,sama5d4-sckc";
 				reg = <0xfc068650 0x4>;
-
-				slow_rc_osc: slow_rc_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
-					#clock-cells = <0>;
-					clock-frequency = <32768>;
-					clock-accuracy = <250000000>;
-					atmel,startup-time-usec = <75>;
-				};
-
-				slow_osc: slow_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-osc";
-					#clock-cells = <0>;
-					clocks = <&slow_xtal>;
-					atmel,startup-time-usec = <1200000>;
-				};
-
-				clk32k: slowck {
-					compatible = "atmel,at91sam9x5-clk-slow";
-					#clock-cells = <0>;
-					clocks = <&slow_rc_osc &slow_osc>;
-				};
+				#clock-cells = <0>;
+				clocks = <&slow_xtal>;
 			};
 
 			rtc@fc0686b0 {
@@ -1461,8 +1442,8 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>,     /* conflicts with D14 and TDI */
-							<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;  /* conflicts with D15 and TDO */
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* conflicts with D14 and TDI */
+							 AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;		/* conflicts with D15 and TDO */
 					};
 				};
 
diff --git a/src/arm/sh73a0-kzm9g.dts b/src/arm/sh73a0-kzm9g.dts
index c2d8a080e392..3d65f1f6d78b 100644
--- a/src/arm/sh73a0-kzm9g.dts
+++ b/src/arm/sh73a0-kzm9g.dts
@@ -22,7 +22,7 @@
 	compatible = "renesas,kzm9g", "renesas,sh73a0";
 
 	aliases {
-		serial4 = &scifa4;
+		serial0 = &scifa4;
 	};
 
 	cpus {
@@ -39,16 +39,16 @@
 	};
 
 	chosen {
-		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
-		stdout-path = &scifa4;
+		bootargs = "root=/dev/nfs ip=dhcp ignore_loglevel rw";
+		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x20000000>;
 	};
 
-	reg_1p8v: regulator@0 {
+	reg_1p8v: regulator-1p8v {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-1.8V";
 		regulator-min-microvolt = <1800000>;
@@ -57,7 +57,7 @@
 		regulator-boot-on;
 	};
 
-	reg_3p3v: regulator@1 {
+	reg_3p3v: regulator-3p3v {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -66,7 +66,7 @@
 		regulator-boot-on;
 	};
 
-	vmmc_sdhi0: regulator@2 {
+	vmmc_sdhi0: regulator-vmmc-sdhi0 {
 		compatible = "regulator-fixed";
 		regulator-name = "SDHI0 Vcc";
 		regulator-min-microvolt = <3300000>;
@@ -75,7 +75,7 @@
 		enable-active-high;
 	};
 
-	vmmc_sdhi2: regulator@3 {
+	vmmc_sdhi2: regulator-vmmc-sdhi2 {
 		compatible = "regulator-fixed";
 		regulator-name = "SDHI2 Vcc";
 		regulator-min-microvolt = <3300000>;
@@ -352,7 +352,7 @@
 		};
 	};
 
-	scifa4_pins: serial4 {
+	scifa4_pins: scifa4 {
 		groups = "scifa4_data", "scifa4_ctrl";
 		function = "scifa4";
 	};
@@ -378,6 +378,7 @@
 	pinctrl-0 = <&scifa4_pins>;
 	pinctrl-names = "default";
 
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/src/arm/sh73a0.dtsi b/src/arm/sh73a0.dtsi
index c4f434cdec60..e1267590b575 100644
--- a/src/arm/sh73a0.dtsi
+++ b/src/arm/sh73a0.dtsi
@@ -8,8 +8,6 @@
  * kind, whether express or implied.
  */
 
-/include/ "skeleton.dtsi"
-
 #include <dt-bindings/clock/sh73a0-clock.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -17,6 +15,8 @@
 / {
 	compatible = "renesas,sh73a0";
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	cpus {
 		#address-cells = <1>;
@@ -55,7 +55,7 @@
 		      <0xf0000100 0x100>;
 	};
 
-	L2: cache-controller {
+	L2: cache-controller@f0100000 {
 		compatible = "arm,pl310-cache";
 		reg = <0xf0100000 0x1000>;
 		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/src/arm/skeleton.dtsi b/src/arm/skeleton.dtsi
index b41d241de2cd..28b81d60b407 100644
--- a/src/arm/skeleton.dtsi
+++ b/src/arm/skeleton.dtsi
@@ -1,4 +1,8 @@
 /*
+ * This file is deprecated, and will be removed once existing users have been
+ * updated. New dts{,i} files should *not* include skeleton.dtsi, and should
+ * instead explicitly provide the below nodes only as required.
+ *
  * Skeleton device tree; the bare minimum needed to boot; just include and
  * add a compatible value.  The bootloader will typically populate the memory
  * node.
diff --git a/src/arm/socfpga.dtsi b/src/arm/socfpga.dtsi
index 9f48141270b8..da689659131f 100644
--- a/src/arm/socfpga.dtsi
+++ b/src/arm/socfpga.dtsi
@@ -686,6 +686,12 @@
 			arm,data-latency = <2 1 1>;
 			prefetch-data = <1>;
 			prefetch-instr = <1>;
+			arm,shared-override;
+			arm,double-linefill = <1>;
+			arm,double-linefill-incr = <0>;
+			arm,double-linefill-wrap = <1>;
+			arm,prefetch-drop = <0>;
+			arm,prefetch-offset = <7>;
 		};
 
 		mmc: dwmmc0@ff704000 {
@@ -700,11 +706,38 @@
 			status = "disabled";
 		};
 
+		nand0: nand@ff900000 {
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			compatible = "denali,denali-nand-dt";
+			reg = <0xff900000 0x100000>,
+			      <0xffb80000 0x10000>;
+			reg-names = "nand_data", "denali_reg";
+			interrupts = <0x0 0x90 0x4>;
+			dma-mask = <0xffffffff>;
+			clocks = <&nand_clk>;
+			status = "disabled";
+		};
+
 		ocram: sram@ffff0000 {
 			compatible = "mmio-sram";
 			reg = <0xffff0000 0x10000>;
 		};
 
+		qspi: spi@ff705000 {
+			compatible = "cdns,qspi-nor";
+                        #address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xff705000 0x1000>,
+			      <0xffa00000 0x1000>;
+			interrupts = <0 151 4>;
+			cdns,fifo-depth = <128>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x00000000>;
+			clocks = <&qspi_clk>;
+			status = "disabled";
+		};
+
 		rst: rstmgr@ffd05000 {
 			#reset-cells = <1>;
 			compatible = "altr,rst-mgr";
diff --git a/src/arm/socfpga_arria10.dtsi b/src/arm/socfpga_arria10.dtsi
index 17e81dc9213e..551c636a4f01 100644
--- a/src/arm/socfpga_arria10.dtsi
+++ b/src/arm/socfpga_arria10.dtsi
@@ -22,11 +22,6 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-	};
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -567,23 +562,35 @@
 			status = "disabled";
 		};
 
+		spi1: spi@ffda5000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda5000 0x100>;
+			interrupts = <0 102 4>;
+			num-chipselect = <4>;
+			bus-num = <0>;
+			/*32bit_access;*/
+			tx-dma-channel = <&pdma 16>;
+			rx-dma-channel = <&pdma 17>;
+			clocks = <&spi_m_clk>;
+			status = "disabled";
+		};
+
 		sdr: sdr@ffc25000 {
 			compatible = "syscon";
 			reg = <0xffcfb100 0x80>;
 		};
 
-		sdramedac {
-			compatible = "altr,sdram-edac-a10";
-			altr,sdr-syscon = <&sdr>;
-			interrupts = <0 2 4>, <0 0 4>;
-		};
-
 		L2: l2-cache@fffff000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xfffff000 0x1000>;
 			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-level = <2>;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
+			arm,shared-override;
 		};
 
 		mmc: dwmmc0@ff808000 {
@@ -610,19 +617,78 @@
 			#size-cells = <1>;
 			interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
 				     <0 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			ranges;
 
+			sdramedac {
+				compatible = "altr,sdram-edac-a10";
+				altr,sdr-syscon = <&sdr>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+					     <49 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			l2-ecc@ffd06010 {
 				compatible = "altr,socfpga-a10-l2-ecc";
 				reg = <0xffd06010 0x4>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+					     <32 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			ocram-ecc@ff8c3000 {
 				compatible = "altr,socfpga-a10-ocram-ecc";
 				reg = <0xff8c3000 0x400>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
+					     <33 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			emac0-rx-ecc@ff8c0800 {
+				compatible = "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0800 0x400>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
+					     <36 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			emac0-tx-ecc@ff8c0c00 {
+				compatible = "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0c00 0x400>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
+					     <37 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			dma-ecc@ff8c8000 {
+				compatible = "altr,socfpga-dma-ecc";
+				reg = <0xff8c8000 0x400>;
+				altr,ecc-parent = <&pdma>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+					     <42 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			usb0-ecc@ff8c8800 {
+				compatible = "altr,socfpga-usb-ecc";
+				reg = <0xff8c8800 0x400>;
+				altr,ecc-parent = <&usb0>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+					     <34 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
+		qspi: spi@ff809000 {
+			compatible = "cdns,qspi-nor";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xff809000 0x100>,
+			      <0xffa00000 0x100000>;
+			interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <128>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x00000000>;
+			clocks = <&qspi_clk>;
+			status = "disabled";
+		};
+
 		rst: rstmgr@ffd05000 {
 			#reset-cells = <1>;
 			compatible = "altr,rst-mgr";
diff --git a/src/arm/socfpga_arria10_socdk.dtsi b/src/arm/socfpga_arria10_socdk.dtsi
index 567df98f1bb5..eb00ae37f316 100644
--- a/src/arm/socfpga_arria10_socdk.dtsi
+++ b/src/arm/socfpga_arria10_socdk.dtsi
@@ -20,9 +20,14 @@
 	model = "Altera SOCFPGA Arria 10";
 	compatible = "altr,socfpga-arria10", "altr,socfpga";
 
+	aliases {
+		ethernet0 = &gmac0;
+		serial0 = &uart1;
+	};
+
 	chosen {
 		bootargs = "earlyprintk";
-		stdout-path = "serial1:115200n8";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
@@ -31,6 +36,30 @@
 		reg = <0x0 0x40000000>; /* 1GB */
 	};
 
+	a10leds {
+		compatible = "gpio-leds";
+
+		a10sr_led0 {
+			label = "a10sr-led0";
+			gpios = <&a10sr_gpio 0 1>;
+		};
+
+		a10sr_led1 {
+			label = "a10sr-led1";
+			gpios = <&a10sr_gpio 1 1>;
+		};
+
+		a10sr_led2 {
+			label = "a10sr-led2";
+			gpios = <&a10sr_gpio 2 1>;
+		};
+
+		a10sr_led3 {
+			label = "a10sr-led3";
+			gpios = <&a10sr_gpio 3 1>;
+		};
+	};
+
 	soc {
 		clkmgr@ffd04000 {
 			clocks {
@@ -70,6 +99,31 @@
 	status = "okay";
 };
 
+&gpio1 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	resource-manager@0 {
+		compatible = "altr,a10sr";
+		reg = <0>;
+		spi-max-frequency = <100000>;
+		/* low-level active IRQ at GPIO1_5 */
+		interrupt-parent = <&portb>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		a10sr_gpio: gpio-controller {
+			compatible = "altr,a10sr-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+};
+
 &i2c1 {
 	speed-mode = <0>;
 	status = "okay";
diff --git a/src/arm/socfpga_arria10_socdk_qspi.dts b/src/arm/socfpga_arria10_socdk_qspi.dts
new file mode 100644
index 000000000000..beb2fc6b9eb6
--- /dev/null
+++ b/src/arm/socfpga_arria10_socdk_qspi.dts
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2016 Intel. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+#include "socfpga_arria10_socdk.dtsi"
+
+&qspi {
+	status = "okay";
+
+	flash0: n25q00@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q00aa";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@qspi-boot {
+			label = "Boot and fpga data";
+			reg = <0x0 0x2720000>;
+		};
+
+		partition@qspi-rootfs {
+			label = "Root Filesystem - JFFS2";
+			reg = <0x2720000 0x58E0000>;
+		};
+	};
+};
diff --git a/src/arm/socfpga_arria10_socdk_sdmmc.dts b/src/arm/socfpga_arria10_socdk_sdmmc.dts
index 8a7dfa473e98..040a164ba148 100644
--- a/src/arm/socfpga_arria10_socdk_sdmmc.dts
+++ b/src/arm/socfpga_arria10_socdk_sdmmc.dts
@@ -25,3 +25,15 @@
 	broken-cd;
 	bus-width = <4>;
 };
+
+&eccmgr {
+	sdmmca-ecc@ff8c2c00 {
+		compatible = "altr,socfpga-sdmmc-ecc";
+		reg = <0xff8c2c00 0x400>;
+		altr,ecc-parent = <&mmc>;
+		interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+			     <47 IRQ_TYPE_LEVEL_HIGH>,
+			     <16 IRQ_TYPE_LEVEL_HIGH>,
+			     <48 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/src/arm/socfpga_arria5_socdk.dts b/src/arm/socfpga_arria5_socdk.dts
index 3c8867862b0d..f739ead074a2 100644
--- a/src/arm/socfpga_arria5_socdk.dts
+++ b/src/arm/socfpga_arria5_socdk.dts
@@ -82,6 +82,39 @@
 	status = "okay";
 };
 
+&qspi {
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q256a";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@qspi-boot {
+			/* 8MB for raw data. */
+			label = "Flash 0 Raw Data";
+			reg = <0x0 0x800000>;
+		};
+
+		partition@qspi-rootfs {
+			/* 120MB for jffs2 data. */
+			label = "Flash 0 jffs2 Filesystem";
+			reg = <0x800000 0x7800000>;
+		};
+	};
+};
+
 &usb1 {
 	status = "okay";
 };
diff --git a/src/arm/socfpga_cyclone5_de0_sockit.dts b/src/arm/socfpga_cyclone5_de0_sockit.dts
index afea3645ada4..5ecd2ef405e3 100644
--- a/src/arm/socfpga_cyclone5_de0_sockit.dts
+++ b/src/arm/socfpga_cyclone5_de0_sockit.dts
@@ -18,7 +18,7 @@
 
 / {
 	model = "Terasic DE-0(Atlas)";
-	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+	compatible = "terasic,de0-atlas", "altr,socfpga-cyclone5", "altr,socfpga";
 
 	chosen {
 		bootargs = "earlyprintk";
diff --git a/src/arm/socfpga_cyclone5_mcv.dtsi b/src/arm/socfpga_cyclone5_mcv.dtsi
index f86f9c060d7a..6ad3b1eb9b86 100644
--- a/src/arm/socfpga_cyclone5_mcv.dtsi
+++ b/src/arm/socfpga_cyclone5_mcv.dtsi
@@ -18,7 +18,7 @@
 #include "socfpga_cyclone5.dtsi"
 
 / {
-	model = "DENX MCV";
+	model = "Aries/DENX MCV";
 	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
 
 	memory {
diff --git a/src/arm/socfpga_cyclone5_mcvevk.dts b/src/arm/socfpga_cyclone5_mcvevk.dts
index 7186a29b8b86..e5a98e5696ca 100644
--- a/src/arm/socfpga_cyclone5_mcvevk.dts
+++ b/src/arm/socfpga_cyclone5_mcvevk.dts
@@ -18,8 +18,8 @@
 #include "socfpga_cyclone5_mcv.dtsi"
 
 / {
-	model = "DENX MCV EVK";
-	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+	model = "Aries/DENX MCV EVK";
+	compatible = "denx,mcvevk", "altr,socfpga-cyclone5", "altr,socfpga";
 
 	aliases {
 		ethernet0 = &gmac0;
diff --git a/src/arm/socfpga_cyclone5_socdk.dts b/src/arm/socfpga_cyclone5_socdk.dts
index 15e43f43f244..6306d008f01b 100644
--- a/src/arm/socfpga_cyclone5_socdk.dts
+++ b/src/arm/socfpga_cyclone5_socdk.dts
@@ -19,7 +19,7 @@
 
 / {
 	model = "Altera SOCFPGA Cyclone V SoC Development Kit";
-	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+	compatible = "altr,socfpga-cyclone5-socdk", "altr,socfpga-cyclone5", "altr,socfpga";
 
 	chosen {
 		bootargs = "earlyprintk";
@@ -87,6 +87,39 @@
 	status = "okay";
 };
 
+&qspi {
+	status = "okay";
+
+	flash0: n25q00@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q00";
+		reg = <0>;	/* chip select */
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@qspi-boot {
+			/* 8MB for raw data. */
+			label = "Flash 0 Raw Data";
+			reg = <0x0 0x800000>;
+		};
+
+		partition@qspi-rootfs {
+			/* 120MB for jffs2 data. */
+			label = "Flash 0 jffs2 Filesystem";
+			reg = <0x800000 0x7800000>;
+		};
+	};
+};
+
 &usb1 {
 	status = "okay";
 };
diff --git a/src/arm/socfpga_cyclone5_sockit.dts b/src/arm/socfpga_cyclone5_sockit.dts
index 02e22f554ef0..a0c90b3bdfd1 100644
--- a/src/arm/socfpga_cyclone5_sockit.dts
+++ b/src/arm/socfpga_cyclone5_sockit.dts
@@ -19,7 +19,7 @@
 
 / {
 	model = "Terasic SoCkit";
-	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+	compatible = "terasic,socfpga-cyclone5-sockit", "altr,socfpga-cyclone5", "altr,socfpga";
 
 	chosen {
 		bootargs = "earlyprintk";
@@ -175,6 +175,27 @@
 	status = "okay";
 };
 
+&qspi {
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q00";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+	};
+};
+
 &usb1 {
 	status = "okay";
 };
diff --git a/src/arm/socfpga_cyclone5_socrates.dts b/src/arm/socfpga_cyclone5_socrates.dts
index e1a61f20873f..c3d52f27b21e 100644
--- a/src/arm/socfpga_cyclone5_socrates.dts
+++ b/src/arm/socfpga_cyclone5_socrates.dts
@@ -52,7 +52,7 @@
 	status = "okay";
 
 	rtc: rtc@68 {
-		compatible = "stm,m41t82";
+		compatible = "st,m41t82";
 		reg = <0x68>;
 	};
 };
@@ -80,3 +80,22 @@
 &mmc {
 	status = "okay";
 };
+
+&qspi {
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q256a";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+		status = "okay";
+	};
+};
diff --git a/src/arm/socfpga_cyclone5_sodia.dts b/src/arm/socfpga_cyclone5_sodia.dts
new file mode 100644
index 000000000000..5b7e3c27e6e9
--- /dev/null
+++ b/src/arm/socfpga_cyclone5_sodia.dts
@@ -0,0 +1,123 @@
+/*
+ *  Copyright (C) 2016 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "socfpga_cyclone5.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Altera SOCFPGA Cyclone V SoC Macnica Sodia board";
+	compatible = "macnica,sodia", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
+	regulator_3_3v: 3-3-v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		hps_led0 {
+			label = "hps:green:led0";
+			gpios = <&portb 12 GPIO_ACTIVE_LOW>;
+		};
+
+		hps_led1 {
+			label = "hps:green:led1";
+			gpios = <&portb 13 GPIO_ACTIVE_LOW>;
+		};
+
+		hps_led2 {
+			label = "hps:green:led2";
+			gpios = <&portb 14 GPIO_ACTIVE_LOW>;
+		};
+
+		hps_led3 {
+			label = "hps:green:led3";
+			gpios = <&portb 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy = <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&portb 18 0>;
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/src/arm/socfpga_cyclone5_vining_fpga.dts b/src/arm/socfpga_cyclone5_vining_fpga.dts
index b844473601d2..363ee62457fe 100644
--- a/src/arm/socfpga_cyclone5_vining_fpga.dts
+++ b/src/arm/socfpga_cyclone5_vining_fpga.dts
@@ -51,7 +51,7 @@
 
 / {
 	model = "samtec VIN|ING FPGA";
-	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+	compatible = "samtec,vining", "altr,socfpga-cyclone5", "altr,socfpga";
 
 	chosen {
 		bootargs = "console=ttyS0,115200";
diff --git a/src/arm/spear13xx.dtsi b/src/arm/spear13xx.dtsi
index 449acf0d8272..17ea0abcdbd7 100644
--- a/src/arm/spear13xx.dtsi
+++ b/src/arm/spear13xx.dtsi
@@ -118,6 +118,7 @@
 			block_size = <0xfff>;
 			dma-masters = <2>;
 			data-width = <8 8>;
+			multi-block = <1 1 1 1 1 1 1 1>;
 		};
 
 		dma@eb000000 {
@@ -134,6 +135,7 @@
 			chan_priority = <1>;
 			block_size = <0xfff>;
 			data-width = <8 8>;
+			multi-block = <1 1 1 1 1 1 1 1>;
 		};
 
 		fsmc: flash@b0000000 {
diff --git a/src/arm/ste-dbx5x0.dtsi b/src/arm/ste-dbx5x0.dtsi
index 6ae56838bd3a..d309314f3a36 100644
--- a/src/arm/ste-dbx5x0.dtsi
+++ b/src/arm/ste-dbx5x0.dtsi
@@ -604,6 +604,7 @@
 				#interrupt-cells = <2>;
 
 				ab8500_gpio: ab8500-gpio {
+					compatible = "stericsson,ab8500-gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
 				};
diff --git a/src/arm/ste-href-tvk1281618.dtsi b/src/arm/ste-href-tvk1281618.dtsi
index fc5e8ce700c3..3c9f2f068c2f 100644
--- a/src/arm/ste-href-tvk1281618.dtsi
+++ b/src/arm/ste-href-tvk1281618.dtsi
@@ -99,46 +99,69 @@
 				vddio-supply = <&db8500_vsmps2_reg>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&accel_tvk_mode>;
-				interrupt-parent = <&gpio2>;
-				interrupts = <18 IRQ_TYPE_EDGE_FALLING>,
-					     <19 IRQ_TYPE_EDGE_FALLING>;
-			};
-			lsm303dlh@1e {
 				/*
-				 * This magnetometer is packaged with
-				 * the accelerometer, and has a DRDY line,
-				 * however it is not connected on this
-				 * board so it can not generate interrupts.
+				 * These interrupts cannot be used: the other component
+				 * ST-Micro L3D4200D gyro that is connected to the same lines
+				 * cannot set its DRDY line to open drain, so it cannot be
+				 * shared with other peripherals. The should be defined for
+				 * the falling edge if they could be wired together.
+				 *
+				 * interrupts-extended =
+				 * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
+				 * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>;
 				 */
+			};
+			lsm303dlh@1e {
+				/* Magnetometer */
 				compatible = "st,lsm303dlh-magn";
 				reg = <0x1e>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>;
 				vddio-supply = <&db8500_vsmps2_reg>;
+				/*
+				 * These interrupts cannot be used: the other component
+				 * ST-Micro L3D4200D gyro that is connected to the same lines
+				 * cannot set its DRDY line to open drain, so it cannot be
+				 * shared with other peripherals. The should be defined for
+				 * the falling edge if they could be wired together.
+				 *
+				 * interrupts-extended =
+				 * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
+				 * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>;
+				 */
 			};
 			lis331dl@1c {
 				/* Accelerometer */
 				compatible = "st,lis331dl-accel";
 				st,drdy-int-pin = <1>;
-				drive-open-drain;
 				reg = <0x1c>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>;
 				vddio-supply = <&db8500_vsmps2_reg>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&accel_tvk_mode>;
 				interrupt-parent = <&gpio2>;
-				interrupts = <18 IRQ_TYPE_EDGE_FALLING>,
-					     <19 IRQ_TYPE_EDGE_FALLING>;
+				/* INT2 would need to be open drain */
+				interrupts = <18 IRQ_TYPE_EDGE_RISING>,
+					     <19 IRQ_TYPE_EDGE_RISING>;
 			};
 			ak8974@0f {
 				/* Magnetometer */
 				compatible = "asahi-kasei,ak8974";
 				reg = <0x0f>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
+				avdd-supply = <&ab8500_ldo_aux1_reg>;
+				dvdd-supply = <&db8500_vsmps2_reg>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&gyro_magn_tvk_mode>;
-				interrupt-parent = <&gpio1>;
-				interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+				/*
+				 * These interrupts cannot be used: the other component
+				 * ST-Micro L3D4200D gyro that is connected to the same lines
+				 * cannot set its DRDY line to open drain, so it cannot be
+				 * shared with other peripherals. The should be defined for
+				 * the falling edge if they could be wired together.
+				 *
+				 * interrupts-extended =
+				 * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
+				 * <&gpio0 31 IRQ_TYPE_EDGE_FALLING>;
+				 */
 			};
 			l3g4200d@68 {
 				/* Gyroscope */
@@ -149,8 +172,9 @@
 				vddio-supply = <&db8500_vsmps2_reg>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&gyro_magn_tvk_mode>;
-				interrupt-parent = <&gpio1>;
-				interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+				interrupts-extended =
+				<&gpio1 0 IRQ_TYPE_EDGE_RISING>,
+				<&gpio0 31 IRQ_TYPE_EDGE_RISING>;
 			};
 			lsp001wm@5c {
 				/* Barometer/pressure sensor */
@@ -218,7 +242,7 @@
 					/* Accelerometer interrupt lines 1 & 2 */
 					tvk_cfg {
 						pins = "GPIO82_C1", "GPIO83_D3";
-						ste,config = <&gpio_in_pu>;
+						ste,config = <&gpio_in_pd>;
 					};
 				};
 			};
diff --git a/src/arm/ste-href.dtsi b/src/arm/ste-href.dtsi
index 6d8ce154347e..48dc38482633 100644
--- a/src/arm/ste-href.dtsi
+++ b/src/arm/ste-href.dtsi
@@ -223,7 +223,6 @@
 		prcmu@80157000 {
 			ab8500 {
 				ab8500-gpio {
-					compatible = "stericsson,ab8500-gpio";
 				};
 
 				ab8500-regulators {
diff --git a/src/arm/ste-hrefv60plus.dtsi b/src/arm/ste-hrefv60plus.dtsi
index 45d7af326718..7187676836be 100644
--- a/src/arm/ste-hrefv60plus.dtsi
+++ b/src/arm/ste-hrefv60plus.dtsi
@@ -18,6 +18,126 @@
 	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
 
 	soc {
+		/* Name the GPIO muxed rails on the HREF boards */
+		gpio@8012e000 {
+			/* GPIOs 0 - 31 */
+			gpio-line-names =
+				     /* GPIO0,1 used for UART0 BT RX/TX */
+				     "", "",
+				     "UART_WAKE",
+				     "BT_WAKE",
+				     "",
+				     "SDMMC_1V8_3V_SEL",
+				     "FLASH_LED_SYNC (FLASH_CTRL_0)",
+				     "XENON_READY (FLASH_CTRL_1)",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "",
+				     "",
+				     "FLASH_LED_EN (FLASH_CTRL_3)",
+				     "", "",
+				     "", "", "", "", "",
+				     /* Used by UART2 (console) */
+				     "", "",
+				     "MAGNETOMETER_INT";
+		};
+
+		gpio@8012e080 {
+			/* GPIOs 32 - 63 */
+			gpio-line-names =
+				     "MAGNETOMETER_DRDY",
+				     "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "";
+		};
+
+		gpio@8000e000 {
+			/* GPIOs 64 - 95 */
+			gpio-line-names = "XENON_EN2 (FLASH_CTRL_4)",
+				     "DISP1_RST",
+				     "DISP2_RST",
+				     "TOUCH_INT2",
+				     "LCD_VSI0_A",
+				     "LCD_VSI1_A",
+				     /* GPIO 70-77 used for ETM */
+				     "", "", "", "", "", "", "", "",
+				     /* GPIO 78-81 used for YCBCR */
+				     "", "", "", "",
+				     "ACCELEROMETER_INT1_RDY",
+				     "ACCELEROMETER_INT2",
+				     "TOUCH_INT",
+				     "WLAN_ENA",
+				     "", "", "", "", "",
+				     "FORCE_SENSING_INT",
+				     "FORCE_SENSING_RESET",
+				     "", "",
+				     "SDMMC_CD";
+		};
+
+		gpio@8000e080 {
+			/* GPIOs 96 - 127 */
+			gpio-line-names = "",
+				     "FORCE_SENSING_WU",
+				     "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "";
+		};
+
+		gpio@8000e100 {
+			/* GPIOs 128 - 159 */
+			gpio-line-names = "", "", "", "", "", "", "", "",
+				     "", "", "",
+				     "DIPRO_INT", /* GPIO139 */
+				     "XSHUTDOWN_SECONDARY_SENSOR",
+				     "XSHUTDOWN_PRIMARY_SENSOR",
+				     "NFC_RST (NFC_CTRL_",
+				     "TOUCH_RST",
+				     "NFC_IRQ (NFC_CTRL_1)",
+				     "HAL_SW",
+				     "TOUCH_RST2",
+				     "", "",
+				     "VAUDIO_HF_EN", /* GPIO149 */
+				     "", "", "", "", "", "", "", "", "", "";
+		};
+
+		gpio@8000e180 {
+			/* GPIOs 160 - 191 */
+			gpio-line-names = "", "", "", "", "", "", "", "",
+				     "",
+				     "SDMMC_EN",
+				     "XENON_CHARGE (FLASH_CONTROL_5)",
+				     "GBF_ENA_RESET",
+				     "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "";
+		};
+
+		gpio@8011e000 {
+			/* GPIOs 192 - 223 */
+			gpio-line-names = "HDTV_INTN",
+				     "", "", "",
+				     "HDTV_RSTN",
+				     "", "", "",
+				     "", /* GPIO200 */
+				     "", "", "", "", "", "", "",
+				     /* GPIO208-216 used for WGBF_MC1 */
+				     "", "", "", "", "", "", "", "", "",
+				     "SW_FRONT_PROXIMITY", /* GPIO217 */
+				     "KPD_CTRL_INT", /* Keypad controller */
+				     "", "", "", "", "";
+		};
+
+		gpio@8011e080 {
+			/* GPIOs 224 - 255 */
+			gpio-line-names = "", "",
+				     "HSIT_ACWAKE0",
+				     "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "";
+		};
+
 		// External Micro SD slot
 		sdi0_per1@80126000 {
 			cd-gpios  = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95
diff --git a/src/arm/ste-nomadik-nhk15.dts b/src/arm/ste-nomadik-nhk15.dts
index d35aa88791ad..1ec46a794a4d 100644
--- a/src/arm/ste-nomadik-nhk15.dts
+++ b/src/arm/ste-nomadik-nhk15.dts
@@ -140,6 +140,10 @@
 						0x03020067 // Up
 						0x0303006c>; // Down
 			};
+			stmpe0_pwm: stmpe_pwm {
+				compatible = "st,stmpe-pwm";
+				#pwm-cells = <2>;
+			};
 		};
 		stmpe1: stmpe2401@44 {
 			compatible = "st,stmpe2401";
@@ -172,6 +176,50 @@
 	};
 
 	amba {
+		clcd@10120000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&clcd_24bit_mux>;
+			port {
+				nomadik_clcd_pads: endpoint {
+					remote-endpoint = <&nomadik_clcd_panel>;
+					arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
+				};
+			};
+
+			/*
+			 * WVGA connector 21
+			 * WVGA (800x480): 4.3" TPG110 TDO43MTEA2 24-bit RGB
+			 * with TPO touch screen.
+			 */
+			panel {
+				compatible = "tpo,tpg110", "panel-dpi";
+				grestb-gpios = <&stmpe_gpio44 5 GPIO_ACTIVE_LOW>;
+				scen-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+				scl-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+				sda-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+				backlight = <&bl>;
+
+				port {
+					nomadik_clcd_panel: endpoint {
+						remote-endpoint = <&nomadik_clcd_pads>;
+					};
+				};
+
+				panel-timing {
+					clock-frequency = <33200000>;
+					hactive = <800>;
+					hback-porch = <216>;
+					hfront-porch = <40>;
+					hsync-len = <1>;
+					vactive = <480>;
+					vback-porch = <35>;
+					vfront-porch = <10>;
+					vsync-len = <1>;
+				};
+			};
+		};
+
 		/* Activate RX/TX and CTS/RTS on UART 0 */
 		uart0: uart@101fd000 {
 			pinctrl-names = "default";
@@ -183,4 +231,24 @@
 			wp-gpios = <&stmpe_gpio44 18 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&stmpe0_pwm 0 500000>;
+		pwm-names = "backlight";
+		brightness-levels = <
+			0  1  2  3  4  5  6  7  8  9
+			10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29
+			30 31 32 33 34 35 36 37 38 39
+			40 41 42 43 44 45 46 47 48 49
+			50 51 52 53 54 55 56 57 58 59
+			60 61 62 63 64 65 66 67 68 69
+			70 71 72 73 74 75 76 77 78 79
+			80 81 82 83 84 85 86 87 88 89
+			90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <100>;
+	};
 };
diff --git a/src/arm/ste-nomadik-stn8815.dtsi b/src/arm/ste-nomadik-stn8815.dtsi
index d2d532a9d783..adb1c0998b81 100644
--- a/src/arm/ste-nomadik-stn8815.dtsi
+++ b/src/arm/ste-nomadik-stn8815.dtsi
@@ -166,6 +166,24 @@
 				};
 			};
 		};
+		clcd {
+			/*
+			 * This should be activated to use the additional
+			 * 8 lines for bits 16 thru 23 from the CLCD block.
+			 */
+			clcd_24bit_mux: clcd_mux {
+				clcd_24bit_mux {
+					function = "clcd";
+					groups = "clcd_16_23_b_1";
+				};
+			};
+		};
+	};
+
+	/* Power Management Unit */
+	pmu: pmu@101e9000 {
+		compatible = "stericsson,nomadik-pmu", "syscon";
+		reg = <0x101e0000 0x1000>;
 	};
 
 	src: src@101e0000 {
@@ -726,6 +744,16 @@
 		#size-cells = <1>;
 		ranges;
 
+		clcd@10120000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0x10120000 0x1000>;
+			interrupt-names = "combined";
+			interrupts = <14>;
+			clocks = <&clcdclk>, <&hclkclcd>;
+			clock-names = "clcdclk", "apb_pclk";
+			status = "disabled";
+		};
+
 		vica: intc@10140000 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
diff --git a/src/arm/ste-snowball.dts b/src/arm/ste-snowball.dts
index 36e84efc401c..386eee6de232 100644
--- a/src/arm/ste-snowball.dts
+++ b/src/arm/ste-snowball.dts
@@ -95,6 +95,70 @@
 	};
 
 	soc {
+		/* Name the GPIO muxed rails on the Snowball board */
+		gpio@8012e000 {
+			/* GPIOs 0 - 31 */
+			gpio-line-names = "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "",
+				     "AP_GPIO31";
+		};
+
+		gpio@8012e080 {
+			/* GPIOs 32 - 63 */
+			gpio-line-names = "USR PB", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "";
+		};
+
+		gpio@8000e000 {
+			/* GPIOs 64 - 95 */
+			gpio-line-names = "", "", "", "", "AP_GPIO68", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "";
+		};
+
+		gpio@8000e100 {
+			/* GPIOs 128 - 159 */
+			gpio-line-names = "", "", "", "", "", "", "", "",
+				     "", "", "", "", "IRQ_LAN", "RSTn_LAN",
+				     "USR_LED", "", "", "", "", "", "",
+				     "", "", "AP_GPIO151", "AP_GPIO152",
+				     "", "", "", "", "", "", "";
+		};
+
+		gpio@8000e180 {
+			/* GPIOs 160 - 191 */
+			gpio-line-names = "", "AP_GPIO161", "AP_GPIO162",
+				     "ACCELEROMETER_INT1_RDY",
+				     "ACCELEROMETER_INT2", "MAG_DRDY",
+				     "GYRO_DRDY", "RSTn_MLC", "RSTn_SLC",
+				     "GYRO_INT", "UART_WAKE", "GBF_RESET",
+				     "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "";
+		};
+
+		gpio@8011e000 {
+			/* GPIOs 192 - 223 */
+			gpio-line-names = "HDTV_INTn", "", "", "", "HDTV_RST",
+				     "", "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "", "",
+				     "WLAN_RESETN", "WLAN_IRQ", "MMC_EN",
+				     "MMC_CD", "", "", "", "", "";
+		};
+
+		gpio@8011e080 {
+			/* GPIOs 224 - 255 */
+			gpio-line-names = "", "", "", "", "SD_SEL", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "";
+		};
+
 		usb_per5@a03e0000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&musb_default_mode>;
@@ -175,14 +239,25 @@
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <100000000>;
 			bus-width = <4>;
+			cap-sd-highspeed;
 			cap-mmc-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			/* All direction control is used */
+			st,sig-dir-cmd;
+			st,sig-dir-dat0;
+			st,sig-dir-dat2;
+			st,sig-dir-dat31;
+			st,sig-pin-fbclk;
+			full-pwr-cycle;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 			vqmmc-supply = <&vmmci>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&sdi0_default_mode>;
 			pinctrl-1 = <&sdi0_sleep_mode>;
 
-			cd-gpios  = <&gpio6 26 GPIO_ACTIVE_LOW>; // 218
+			/* GPIO218 MMC_CD */
+			cd-gpios  = <&gpio6 26 GPIO_ACTIVE_LOW>;
 
 			status = "okay";
 		};
@@ -352,7 +427,25 @@
 
 			ab8500 {
 				ab8500-gpio {
-					compatible = "stericsson,ab8500-gpio";
+					/*
+					 * AB8500 GPIOs are numbered starting from 1, so the first
+					 * index 0 is what in the datasheet is called "GPIO1", and
+					 * the second is "GPIO2" and so forth. Confusingly, the
+					 * Snowball schematic then names the "GPIO2" line "PM_GPIO1".
+					 * while later naming "GPIO4" as "PM_GPIO4".
+					 */
+					gpio-line-names = "", /* AB8500 GPIO1 */
+						     "PM_GPIO1", /* AB8500 GPIO2 */
+						     "WLAN_CLK_REQ", /* AB8500 GPIO3 */
+						     "PM_GPIO4", /* AB8500 GPIO4 */
+						     "", "", "", "", "", "", "", "", "", "", "",
+						     "EN_3V6", /* AB8500 GPIO16 */
+						     "", "", "", "" ,"", "", "", "", "",
+						     "EN_3V3", /* AB8500 GPIO26 */
+						     "", "", "", "", "", "", "", "", "", "", "", "", "",
+						     "PM_GPIO40", /* AB8500 GPIO40 */
+						     "PM_GPIO41", /* AB8500 GPIO41 */
+						     "PM_GPIO42"; /* AB8500 GPIO42 */
 				};
 
 				ext_regulators: ab8500-ext-regulators {
@@ -467,7 +560,7 @@
 					/* VMMCI level-shifter enable */
 					snowball_cfg3 {
 						pins = "GPIO217_AH12";
-						ste,config = <&gpio_out_lo>;
+						ste,config = <&gpio_out_hi>;
 					};
 					/* VMMCI level-shifter voltage select */
 					snowball_cfg4 {
diff --git a/src/arm/stih407-clock.dtsi b/src/arm/stih407-clock.dtsi
index ad45f5e8fac7..34c119a66f14 100644
--- a/src/arm/stih407-clock.dtsi
+++ b/src/arm/stih407-clock.dtsi
@@ -42,7 +42,7 @@
 
 			clockgen_a9_pll: clockgen-a9-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
+				compatible = "st,stih407-clkgen-plla9";
 
 				clocks = <&clk_sysin>;
 
@@ -55,7 +55,7 @@
 		 */
 		clk_m_a9: clk-m-a9@92b0000 {
 			#clock-cells = <0>;
-			compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+			compatible = "st,stih407-clkgen-a9-mux";
 			reg = <0x92b0000 0x10000>;
 
 			clocks = <&clockgen_a9_pll 0>,
@@ -96,11 +96,12 @@
 
 			clk_s_a0_pll: clk-s-a0-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll0";
 
 				clocks = <&clk_sysin>;
 
 				clock-output-names = "clk-s-a0-pll-ofd-0";
+				clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */
 			};
 
 			clk_s_a0_flexgen: clk-s-a0-flexgen {
@@ -112,12 +113,13 @@
 					 <&clk_sysin>;
 
 				clock-output-names = "clk-ic-lmi0";
+				clock-critical = <CLK_IC_LMI0>;
 			};
 		};
 
 		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-C", "st,quadfs";
+			compatible = "st,quadfs-pll";
 			reg = <0x9103000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -126,6 +128,7 @@
 					     "clk-s-c0-fs0-ch1",
 					     "clk-s-c0-fs0-ch2",
 					     "clk-s-c0-fs0-ch3";
+			clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
 		};
 
 		clk_s_c0: clockgen-c@09103000 {
@@ -134,16 +137,17 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,plls-c32-cx_0", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll0";
 
 				clocks = <&clk_sysin>;
 
 				clock-output-names = "clk-s-c0-pll0-odf-0";
+				clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */
 			};
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,plls-c32-cx_1", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll1";
 
 				clocks = <&clk_sysin>;
 
@@ -194,12 +198,18 @@
 						     "clk-main-disp",
 						     "clk-aux-disp",
 						     "clk-compo-dvp";
+				clock-critical = <CLK_PROC_STFE>,
+						 <CLK_ICN_CPU>,
+						 <CLK_TX_ICN_DMU>,
+						 <CLK_EXT2F_A9>,
+						 <CLK_ICN_LMI>,
+						 <CLK_ICN_SBC>;
 			};
 		};
 
 		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9104000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -216,7 +226,7 @@
 
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen-audio", "st,flexgen";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
@@ -233,7 +243,7 @@
 
 		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9106000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -256,7 +266,7 @@
 
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen-video", "st,flexgen";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
@@ -287,7 +297,7 @@
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9107000 0x1000>;
 
 			clocks = <&clk_sysin>;
diff --git a/src/arm/stih407-family.dtsi b/src/arm/stih407-family.dtsi
index d294e82447a2..ace97e8576db 100644
--- a/src/arm/stih407-family.dtsi
+++ b/src/arm/stih407-family.dtsi
@@ -283,6 +283,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 		};
@@ -296,6 +298,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 		};
@@ -309,6 +313,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c2_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 		};
@@ -322,6 +328,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 		};
@@ -335,6 +343,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c4_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 		};
@@ -348,6 +358,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c5_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 		};
@@ -363,6 +375,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c10_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 		};
@@ -376,6 +390,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c11_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 		};
@@ -550,10 +566,10 @@
 			interrupt-names = "mmcirq";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mmc0>;
-			clock-names = "mmc";
-			clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
+			clock-names = "mmc", "icn";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 			bus-width = <8>;
-			non-removable;
 		};
 
 		mmc1: sdhci@09080000 {
@@ -565,8 +581,9 @@
 			interrupt-names = "mmcirq";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sd1>;
-			clock-names = "mmc";
-			clocks = <&clk_s_c0_flexgen CLK_MMC_1>;
+			clock-names = "mmc", "icn";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_1>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 			resets = <&softreset STIH407_MMC1_SOFTRESET>;
 			bus-width = <4>;
 		};
@@ -608,6 +625,8 @@
 			clock-names = "ahci_clk";
 			clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
 
+			ports-implemented = <0x1>;
+
 			status = "disabled";
 		};
 
@@ -631,6 +650,8 @@
 			clock-names = "ahci_clk";
 			clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
 
+			ports-implemented = <0x1>;
+
 			status = "disabled";
 		};
 
@@ -659,6 +680,7 @@
 				phy-names	= "usb2-phy", "usb3-phy";
 				phys		= <&usb2_picophy0>,
 						  <&phy_port2 PHY_TYPE_USB3>;
+				snps,dis_u3_susphy_quirk;
 			};
 		};
 
@@ -667,6 +689,7 @@
 			compatible	= "st,sti-pwm";
 			#pwm-cells	= <2>;
 			reg		= <0x9810000 0x68>;
+			interrupts      = <GIC_SPI 128 IRQ_TYPE_NONE>;
 			pinctrl-names	= "default";
 			pinctrl-0	= <&pinctrl_pwm0_chan0_default>;
 			clock-names	= "pwm";
@@ -734,6 +757,18 @@
 				 <&clk_s_c0_flexgen CLK_ETH_PHY>;
 		};
 
+		cec: sti-cec@094a087c {
+			compatible = "st,stih-cec";
+			reg = <0x94a087c 0x64>;
+			clocks = <&clk_sysin>;
+			clock-names = "cec-clk";
+			interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
+			interrupt-names = "cec-irq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_cec0_default>;
+			resets = <&softreset STIH407_LPM_SOFTRESET>;
+		};
+
 		rng10: rng@08a89000 {
 			compatible      = "st,rng";
 			reg		= <0x08a89000 0x1000>;
@@ -821,5 +856,152 @@
 			clock-frequency	= <600000000>;
 			st,syscfg	= <&syscfg_core 0x224>;
 		};
+
+		/* fdma audio */
+		fdma0: dma-controller@8e20000 {
+			compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
+			reg = <0x8e20000 0x8000>,
+			      <0x8e30000 0x3000>,
+			      <0x8e37000 0x1000>,
+			      <0x8e38000 0x8000>;
+			reg-names = "slimcore", "dmem", "peripherals", "imem";
+			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
+			dma-channels = <16>;
+			#dma-cells = <3>;
+		};
+
+		/* fdma app */
+		fdma1: dma-controller@8e40000 {
+			compatible = "st,stih407-fdma-mpe31-12", "st,slim-rproc";
+			reg = <0x8e40000 0x8000>,
+			      <0x8e50000 0x3000>,
+			      <0x8e57000 0x1000>,
+			      <0x8e58000 0x8000>;
+			reg-names = "slimcore", "dmem", "peripherals", "imem";
+			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+				<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
+				<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
+				<&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+			interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>;
+			dma-channels = <16>;
+			#dma-cells = <3>;
+		};
+
+		/* fdma free running */
+		fdma2: dma-controller@8e60000 {
+			compatible = "st,stih407-fdma-mpe31-13", "st,slim-rproc";
+			reg = <0x8e60000 0x8000>,
+			      <0x8e70000 0x3000>,
+			      <0x8e77000 0x1000>,
+			      <0x8e78000 0x8000>;
+			reg-names = "slimcore", "dmem", "peripherals", "imem";
+			interrupts = <GIC_SPI 9 IRQ_TYPE_NONE>;
+			dma-channels = <16>;
+			#dma-cells = <3>;
+			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+				<&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				<&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				<&clk_s_c0_flexgen CLK_EXT2F_A9>;
+		};
+
+		sti_sasg_codec: sti-sasg-codec {
+			compatible = "st,stih407-sas-codec";
+			#sound-dai-cells = <1>;
+			status = "disabled";
+			st,syscfg = <&syscfg_core>;
+		};
+
+		sti_uni_player0: sti-uni-player@8d80000 {
+			compatible = "st,stih407-uni-player-hdmi";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			clocks = <&clk_s_d0_flexgen CLK_PCM_0>;
+			assigned-clocks = <&clk_s_d0_quadfs 0>, <&clk_s_d0_flexgen CLK_PCM_0>;
+			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 0>;
+			assigned-clock-rates = <50000000>;
+			reg = <0x8d80000 0x158>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_NONE>;
+			dmas = <&fdma0 2 0 1>;
+			dma-names = "tx";
+
+			status		= "disabled";
+		};
+
+		sti_uni_player1: sti-uni-player@8d81000 {
+			compatible = "st,stih407-uni-player-pcm-out";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			clocks = <&clk_s_d0_flexgen CLK_PCM_1>;
+			assigned-clocks = <&clk_s_d0_quadfs 1>, <&clk_s_d0_flexgen CLK_PCM_1>;
+			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 1>;
+			assigned-clock-rates = <50000000>;
+			reg = <0x8d81000 0x158>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+			dmas = <&fdma0 3 0 1>;
+			dma-names = "tx";
+
+			status = "disabled";
+		};
+
+		sti_uni_player2: sti-uni-player@8d82000 {
+			compatible = "st,stih407-uni-player-dac";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
+			assigned-clocks = <&clk_s_d0_quadfs 2>, <&clk_s_d0_flexgen CLK_PCM_2>;
+			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 2>;
+			assigned-clock-rates = <50000000>;
+			reg = <0x8d82000 0x158>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+			dmas = <&fdma0 4 0 1>;
+			dma-names = "tx";
+
+			status = "disabled";
+		};
+
+		sti_uni_player3: sti-uni-player@8d85000 {
+			compatible = "st,stih407-uni-player-spdif";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			clocks = <&clk_s_d0_flexgen CLK_SPDIFF>;
+			assigned-clocks = <&clk_s_d0_quadfs 3>, <&clk_s_d0_flexgen CLK_SPDIFF>;
+			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 3>;
+			assigned-clock-rates = <50000000>;
+			reg = <0x8d85000 0x158>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
+			dmas = <&fdma0 7 0 1>;
+			dma-names = "tx";
+
+			status = "disabled";
+		};
+
+		sti_uni_reader0: sti-uni-reader@8d83000 {
+			compatible = "st,stih407-uni-reader-pcm_in";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			reg = <0x8d83000 0x158>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_NONE>;
+			dmas = <&fdma0 5 0 1>;
+			dma-names = "rx";
+
+			status = "disabled";
+		};
+
+		sti_uni_reader1: sti-uni-reader@8d84000 {
+			compatible = "st,stih407-uni-reader-hdmi";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			reg = <0x8d84000 0x158>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>;
+			dmas = <&fdma0 6 0 1>;
+			dma-names = "rx";
+
+			status = "disabled";
+		};
 	};
 };
diff --git a/src/arm/stih407-pinctrl.dtsi b/src/arm/stih407-pinctrl.dtsi
index a538ae52d32b..daab16b5ae64 100644
--- a/src/arm/stih407-pinctrl.dtsi
+++ b/src/arm/stih407-pinctrl.dtsi
@@ -58,7 +58,7 @@
 
 			pio0: gpio@09610000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x0 0x100>;
@@ -66,7 +66,7 @@
 			};
 			pio1: gpio@09611000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x1000 0x100>;
@@ -74,7 +74,7 @@
 			};
 			pio2: gpio@09612000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x2000 0x100>;
@@ -82,7 +82,7 @@
 			};
 			pio3: gpio@09613000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x3000 0x100>;
@@ -90,7 +90,7 @@
 			};
 			pio4: gpio@09614000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x4000 0x100>;
@@ -99,7 +99,7 @@
 
 			pio5: gpio@09615000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x5000 0x100>;
@@ -230,6 +230,13 @@
 					};
 				};
 
+				pinctrl_rgmii1_mdio_1: rgmii1-mdio-1 {
+					st,pins {
+						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+					};
+				};
+
 				pinctrl_mii1: mii1 {
 					st,pins {
 						txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
@@ -289,10 +296,12 @@
 				pinctrl_pwm1_chan0_default: pwm1-0-default {
 					st,pins {
 						pwm-out = <&pio3 0 ALT1 OUT>;
+						pwm-capturein = <&pio3 2 ALT1 IN>;
 					};
 				};
 				pinctrl_pwm1_chan1_default: pwm1-1-default {
 					st,pins {
+						pwm-capturein = <&pio4 3 ALT1 IN>;
 						pwm-out = <&pio4 4 ALT1 OUT>;
 					};
 				};
@@ -373,7 +382,7 @@
 
 			pio10: pio@09200000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x0 0x100>;
@@ -381,7 +390,7 @@
 			};
 			pio11: pio@09201000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x1000 0x100>;
@@ -389,7 +398,7 @@
 			};
 			pio12: pio@09202000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x2000 0x100>;
@@ -397,7 +406,7 @@
 			};
 			pio13: pio@09203000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x3000 0x100>;
@@ -405,7 +414,7 @@
 			};
 			pio14: pio@09204000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x4000 0x100>;
@@ -413,7 +422,7 @@
 			};
 			pio15: pio@09205000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x5000 0x100>;
@@ -421,7 +430,7 @@
 			};
 			pio16: pio@09206000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x6000 0x100>;
@@ -429,7 +438,7 @@
 			};
 			pio17: pio@09207000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x7000 0x100>;
@@ -437,7 +446,7 @@
 			};
 			pio18: pio@09208000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x8000 0x100>;
@@ -445,7 +454,7 @@
 			};
 			pio19: pio@09209000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x9000 0x100>;
@@ -523,6 +532,13 @@
 						scl = <&pio15 5 ALT2 BIDIR>;
 					};
 				};
+
+				pinctrl_i2c2_alt2_1: i2c2-alt2-1 {
+					st,pins {
+						sda = <&pio12 6 ALT2 BIDIR>;
+						scl = <&pio12 5 ALT2 BIDIR>;
+					};
+				};
 			};
 
 			i2c3 {
@@ -916,6 +932,15 @@
 			interrupt-names = "irqmux";
 			ranges = <0 0x09210000 0x10000>;
 
+			pio20: pio@09210000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO20";
+			};
+
 			tsin4 {
 				pinctrl_tsin4_serial_alt1: tsin4_serial_alt1 {
 					st,pins {
@@ -927,15 +952,6 @@
 					};
 				};
 			};
-
-			pio20: pio@09210000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x100>;
-				st,bank-name = "PIO20";
-			};
 		};
 
 		pin-controller-rear {
@@ -951,7 +967,7 @@
 
 			pio30: gpio@09220000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x0 0x100>;
@@ -959,7 +975,7 @@
 			};
 			pio31: gpio@09221000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x1000 0x100>;
@@ -967,7 +983,7 @@
 			};
 			pio32: gpio@09222000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x2000 0x100>;
@@ -975,7 +991,7 @@
 			};
 			pio33: gpio@09223000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x3000 0x100>;
@@ -983,7 +999,7 @@
 			};
 			pio34: gpio@09224000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x4000 0x100>;
@@ -991,7 +1007,7 @@
 			};
 			pio35: gpio@09225000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x5000 0x100>;
@@ -1030,6 +1046,7 @@
 			pwm0 {
 				pinctrl_pwm0_chan0_default: pwm0-0-default {
 					st,pins {
+						pwm-capturein = <&pio31 0 ALT1 IN>;
 						pwm-out = <&pio31 1 ALT1 OUT>;
 					};
 				};
@@ -1067,6 +1084,61 @@
 				};
 			};
 
+			i2s_out {
+				pinctrl_i2s_8ch_out: i2s_8ch_out{
+					st,pins {
+						mclk = <&pio33 5 ALT1 OUT>;
+						lrclk = <&pio33 7 ALT1 OUT>;
+						sclk = <&pio33 6 ALT1 OUT>;
+						data0 = <&pio33 4 ALT1 OUT>;
+						data1 = <&pio34 0 ALT1 OUT>;
+						data2 = <&pio34 1 ALT1 OUT>;
+						data3 = <&pio34 2 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_i2s_2ch_out: i2s_2ch_out{
+					st,pins {
+						mclk = <&pio33 5 ALT1 OUT>;
+						lrclk = <&pio33 7 ALT1 OUT>;
+						sclk = <&pio33 6 ALT1 OUT>;
+						data0 = <&pio33 4 ALT1 OUT>;
+					};
+				};
+			};
+
+			i2s_in {
+				pinctrl_i2s_8ch_in: i2s_8ch_in{
+					st,pins {
+						mclk = <&pio32 5 ALT1 IN>;
+						lrclk = <&pio32 7 ALT1 IN>;
+						sclk = <&pio32 6 ALT1 IN>;
+						data0 = <&pio32 4 ALT1 IN>;
+						data1 = <&pio33 0 ALT1 IN>;
+						data2 = <&pio33 1 ALT1 IN>;
+						data3 = <&pio33 2 ALT1 IN>;
+						data4 = <&pio33 3 ALT1 IN>;
+					};
+				};
+
+				pinctrl_i2s_2ch_in: i2s_2ch_in{
+					st,pins {
+						mclk = <&pio32 5 ALT1 IN>;
+						lrclk = <&pio32 7 ALT1 IN>;
+						sclk = <&pio32 6 ALT1 IN>;
+						data0 = <&pio32 4 ALT1 IN>;
+					};
+				};
+			};
+
+			spdif_out {
+				pinctrl_spdif_out: spdif_out{
+					st,pins {
+						spdif_out = <&pio34 7 ALT1 OUT>;
+					};
+				};
+			};
+
 			serial3 {
 				pinctrl_serial3: serial3-0 {
 					st,pins {
@@ -1085,12 +1157,12 @@
 			reg = <0x0923f080 0x4>;
 			reg-names = "irqmux";
 			interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>;
-			interrupts-names = "irqmux";
+			interrupt-names = "irqmux";
 			ranges = <0 0x09230000 0x3000>;
 
 			pio40: gpio@09230000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0 0x100>;
@@ -1098,7 +1170,7 @@
 			};
 			pio41: gpio@09231000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x1000 0x100>;
@@ -1106,7 +1178,7 @@
 			};
 			pio42: gpio@09232000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x2000 0x100>;
diff --git a/src/arm/stih407.dtsi b/src/arm/stih407.dtsi
index d60f0d8add26..fa149837df14 100644
--- a/src/arm/stih407.dtsi
+++ b/src/arm/stih407.dtsi
@@ -16,7 +16,10 @@
 			#size-cells = <1>;
 
 			assigned-clocks	= <&clk_s_d2_quadfs 0>,
-					  <&clk_s_d2_quadfs 0>,
+					  <&clk_s_d2_quadfs 1>,
+					  <&clk_s_c0_pll1 0>,
+					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+					  <&clk_s_c0_flexgen CLK_MAIN_DISP>,
 					  <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
 					  <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
 					  <&clk_s_d2_flexgen CLK_PIX_GDP1>,
@@ -26,14 +29,21 @@
 
 			assigned-clock-parents = <0>,
 						 <0>,
+						 <0>,
+						 <&clk_s_c0_pll1 0>,
+						 <&clk_s_c0_pll1 0>,
 						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 1>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>;
 
-			assigned-clock-rates = <297000000>, <297000000>;
+			assigned-clock-rates = <297000000>,
+					       <108000000>,
+					       <0>,
+					       <400000000>,
+					       <400000000>;
 
 			ranges;
 
@@ -92,7 +102,7 @@
 							 <&clk_s_d2_quadfs 0>;
 			};
 
-			sti-hdmi@8d04000 {
+			sti_hdmi: sti-hdmi@8d04000 {
 				compatible = "st,stih407-hdmi";
 				reg = <0x8d04000 0x1000>;
 				reg-names = "hdmi-reg";
diff --git a/src/arm/stih410-b2260.dts b/src/arm/stih410-b2260.dts
new file mode 100644
index 000000000000..06b0696cb6b8
--- /dev/null
+++ b/src/arm/stih410-b2260.dts
@@ -0,0 +1,210 @@
+/*
+ * Copyright (C) 2016 STMicroelectronics (R&D) Limited.
+ * Author: Patrice Chotard <patrice.chotard@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih410.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "STiH410 B2260";
+	compatible = "st,stih410-b2260", "st,stih410";
+
+	chosen {
+		bootargs = "console=ttyAS1,115200 clk_ignore_unused";
+		linux,stdout-path = &uart1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	aliases {
+		ttyAS1 = &uart1;
+		ethernet0 = &ethernet0;
+	};
+
+	soc {
+
+		leds {
+			compatible = "gpio-leds";
+			user_green_1 {
+				label = "User_green_1";
+				gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
+				linux,default-trigger = "heartbeat";
+				default-state = "off";
+			};
+
+			user_green_2 {
+				label = "User_green_2";
+				gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
+				default-state = "off";
+			};
+
+			user_green_3 {
+				label = "User_green_3";
+				gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
+				default-state = "off";
+			};
+
+			user_green_4 {
+				label = "User_green_4";
+				gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
+				default-state = "off";
+			};
+		};
+
+		/* Low speed expansion connector */
+		uart0: serial@9830000 {
+			label = "LS-UART0";
+			status = "okay";
+		};
+
+		/* Low speed expansion connector */
+		uart1: serial@9831000 {
+			label = "LS-UART1";
+			status = "okay";
+		};
+
+		/* Low speed expansion connector */
+		spi0: spi@9844000 {
+			label = "LS-SPI0";
+			cs-gpios = <&pio30 3 0>;
+			status = "okay";
+		};
+
+		/* Low speed expansion connector */
+		i2c0: i2c@9840000 {
+			label = "LS-I2C0";
+			status = "okay";
+		};
+
+		/* Low speed expansion connector */
+		i2c1: i2c@9841000 {
+			label = "LS-I2C1";
+			status = "okay";
+		};
+
+		/* high speed expansion connector */
+		i2c2: i2c@9842000 {
+			label = "HS-I2C2";
+			pinctrl-0 = <&pinctrl_i2c2_alt2_1>;
+			status = "okay";
+		};
+
+		/* high speed expansion connector */
+		i2c3: i2c@9843000 {
+			label = "HS-I2C3";
+			pinctrl-0 = <&pinctrl_i2c3_alt3_0>;
+			status = "okay";
+		};
+
+		mmc0: sdhci@09060000 {
+			pinctrl-0 = <&pinctrl_sd0>;
+			bus-width = <4>;
+			status = "okay";
+		};
+
+		/* high speed expansion connector */
+		mmc1: sdhci@09080000 {
+			status = "okay";
+		};
+
+		pwm0: pwm@9810000 {
+			status = "okay";
+		};
+
+		pwm1: pwm@9510000 {
+			status = "okay";
+		};
+
+		usb2_picophy1: phy2 {
+			status = "okay";
+		};
+
+		usb2_picophy2: phy3 {
+			status = "okay";
+		};
+
+		ohci0: usb@9a03c00 {
+			status = "okay";
+		};
+
+		ehci0: usb@9a03e00 {
+			status = "okay";
+		};
+
+		ohci1: usb@9a83c00 {
+			status = "okay";
+		};
+
+		ehci1: usb@9a83e00 {
+			status = "okay";
+		};
+
+		st_dwc3: dwc3@8f94000 {
+			status = "okay";
+		};
+
+		ethernet0: dwmac@9630000 {
+			phy-mode = "rgmii";
+			pinctrl-0 = <&pinctrl_rgmii1 &pinctrl_rgmii1_mdio_1>;
+
+			snps,phy-bus-name = "stmmac";
+			snps,phy-bus-id = <0>;
+			snps,phy-addr = <0>;
+			snps,reset-gpio = <&pio0 7 0>;
+			snps,reset-active-low;
+			snps,reset-delays-us = <0 10000 1000000>;
+
+			status = "okay";
+		};
+
+		sti_uni_player0: sti-uni-player@8d80000 {
+			status = "okay";
+		};
+		/* SSC11 to HDMI */
+		hdmiddc: i2c@9541000 {
+			/* HDMI V1.3a supports Standard mode only */
+			clock-frequency = <100000>;
+			st,i2c-min-scl-pulse-width-us = <0>;
+			st,i2c-min-sda-pulse-width-us = <5>;
+			status = "okay";
+		};
+
+		sound {
+			compatible = "simple-audio-card";
+			simple-audio-card,name = "STI-B2260";
+			status = "okay";
+
+			simple-audio-card,dai-link@0 {
+				/* DAC */
+				format = "i2s";
+				mclk-fs = <128>;
+				cpu {
+					sound-dai = <&sti_uni_player0>;
+				};
+
+				codec {
+					sound-dai = <&sti_hdmi>;
+				};
+			};
+		};
+
+		miphy28lp_phy: miphy28lp@9b22000 {
+
+			phy_port1: port@9b2a000 {
+				st,osc-force-ext;
+			};
+		};
+
+		sata1: sata@9b28000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/src/arm/stih410-clock.dtsi b/src/arm/stih410-clock.dtsi
index d1f2acafc9b6..07c8ef9d77f6 100644
--- a/src/arm/stih410-clock.dtsi
+++ b/src/arm/stih410-clock.dtsi
@@ -44,7 +44,7 @@
 
 			clockgen_a9_pll: clockgen-a9-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
+				compatible = "st,stih407-clkgen-plla9";
 
 				clocks = <&clk_sysin>;
 
@@ -98,11 +98,12 @@
 
 			clk_s_a0_pll: clk-s-a0-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll0";
 
 				clocks = <&clk_sysin>;
 
 				clock-output-names = "clk-s-a0-pll-ofd-0";
+				clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */
 			};
 
 			clk_s_a0_flexgen: clk-s-a0-flexgen {
@@ -115,12 +116,13 @@
 
 				clock-output-names = "clk-ic-lmi0",
 						     "clk-ic-lmi1";
+				clock-critical = <CLK_IC_LMI0>;
 			};
 		};
 
 		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-C", "st,quadfs";
+			compatible = "st,quadfs-pll";
 			reg = <0x9103000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -129,6 +131,7 @@
 					     "clk-s-c0-fs0-ch1",
 					     "clk-s-c0-fs0-ch2",
 					     "clk-s-c0-fs0-ch3";
+			clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
 		};
 
 		clk_s_c0: clockgen-c@09103000 {
@@ -137,16 +140,17 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,plls-c32-cx_0", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll0";
 
 				clocks = <&clk_sysin>;
 
 				clock-output-names = "clk-s-c0-pll0-odf-0";
+				clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */
 			};
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,plls-c32-cx_1", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll1";
 
 				clocks = <&clk_sysin>;
 
@@ -204,12 +208,18 @@
 						     "clk-clust-hades",
 						     "clk-hwpe-hades",
 						     "clk-fc-hades";
+				clock-critical = <CLK_PROC_STFE>,
+						 <CLK_ICN_CPU>,
+						 <CLK_TX_ICN_DMU>,
+						 <CLK_EXT2F_A9>,
+						 <CLK_ICN_LMI>,
+						 <CLK_ICN_SBC>;
 			};
 		};
 
 		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9104000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -226,7 +236,7 @@
 
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen-audio", "st,flexgen";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
@@ -245,7 +255,7 @@
 
 		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9106000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -268,7 +278,7 @@
 
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen-video", "st,flexgen";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
@@ -299,7 +309,7 @@
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9107000 0x1000>;
 
 			clocks = <&clk_sysin>;
diff --git a/src/arm/stih410.dtsi b/src/arm/stih410.dtsi
index 18ed1ad10d32..281a12424cf6 100644
--- a/src/arm/stih410.dtsi
+++ b/src/arm/stih410.dtsi
@@ -41,7 +41,8 @@
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a03c00 0x100>;
 			interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -57,7 +58,8 @@
 			interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -71,7 +73,8 @@
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a83c00 0x100>;
 			interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -87,7 +90,8 @@
 			interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -103,7 +107,10 @@
 			#size-cells = <1>;
 
 			assigned-clocks	= <&clk_s_d2_quadfs 0>,
-					  <&clk_s_d2_quadfs 0>,
+					  <&clk_s_d2_quadfs 1>,
+					  <&clk_s_c0_pll1 0>,
+					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+					  <&clk_s_c0_flexgen CLK_MAIN_DISP>,
 					  <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
 					  <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
 					  <&clk_s_d2_flexgen CLK_PIX_GDP1>,
@@ -113,14 +120,21 @@
 
 			assigned-clock-parents = <0>,
 						 <0>,
+						 <0>,
+						 <&clk_s_c0_pll1 0>,
+						 <&clk_s_c0_pll1 0>,
 						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 1>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>;
 
-			assigned-clock-rates = <297000000>, <297000000>;
+			assigned-clock-rates = <297000000>,
+					       <108000000>,
+					       <0>,
+					       <400000000>,
+					       <400000000>;
 
 			ranges;
 
@@ -179,7 +193,7 @@
 							 <&clk_s_d2_quadfs 0>;
 			};
 
-			sti-hdmi@8d04000 {
+			sti_hdmi: sti-hdmi@8d04000 {
 				compatible = "st,stih407-hdmi";
 				reg = <0x8d04000 0x1000>;
 				reg-names = "hdmi-reg";
@@ -227,5 +241,23 @@
 			clock-names = "bdisp";
 			clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
 		};
+
+		hva@8c85000 {
+			compatible = "st,st-hva";
+			reg = <0x8c85000 0x400>, <0x6000000 0x40000>;
+			reg-names = "hva_registers", "hva_esram";
+			interrupts = <GIC_SPI 58 IRQ_TYPE_NONE>,
+				     <GIC_SPI 59 IRQ_TYPE_NONE>;
+			clock-names = "clk_hva";
+			clocks = <&clk_s_c0_flexgen CLK_HVA>;
+		};
+
+		thermal@91a0000 {
+			compatible = "st,stih407-thermal";
+			reg = <0x91a0000 0x28>;
+			clock-names = "thermal";
+			clocks = <&clk_sysin>;
+			interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+		};
 	};
 };
diff --git a/src/arm/stih418-b2199.dts b/src/arm/stih418-b2199.dts
index 772d2bb07e5f..438e54c585b1 100644
--- a/src/arm/stih418-b2199.dts
+++ b/src/arm/stih418-b2199.dts
@@ -8,6 +8,7 @@
  */
 /dts-v1/;
 #include "stih418.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 / {
 	model = "STiH418 B2199";
 	compatible = "st,stih418-b2199", "st,stih418";
@@ -35,14 +36,12 @@
 		leds {
 			compatible = "gpio-leds";
 			red {
-				#gpio-cells = <2>;
 				label = "Front Panel LED";
-				gpios = <&pio4 1 0>;
+				gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "heartbeat";
 			};
 			green {
-				#gpio-cells = <2>;
-				gpios = <&pio1 3 0>;
+				gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
 				default-state = "off";
 			};
 		};
@@ -86,6 +85,7 @@
 			sd-uhs-sdr50;
 			sd-uhs-sdr104;
 			sd-uhs-ddr50;
+			non-removable;
 		};
 
 		miphy28lp_phy: miphy28lp@9b22000 {
diff --git a/src/arm/stih418-clock.dtsi b/src/arm/stih418-clock.dtsi
index ae6d9978ea19..ee6614b79f7d 100644
--- a/src/arm/stih418-clock.dtsi
+++ b/src/arm/stih418-clock.dtsi
@@ -44,7 +44,7 @@
 
 			clockgen_a9_pll: clockgen-a9-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih418-plls-c28-a9", "st,clkgen-plls-c32";
+				compatible = "st,stih418-clkgen-plla9";
 
 				clocks = <&clk_sysin>;
 
@@ -98,7 +98,7 @@
 
 			clk_s_a0_pll: clk-s-a0-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll0";
 
 				clocks = <&clk_sysin>;
 
@@ -120,7 +120,7 @@
 
 		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-C", "st,quadfs";
+			compatible = "st,quadfs-pll";
 			reg = <0x9103000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -137,7 +137,7 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,plls-c32-cx_0", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll0";
 
 				clocks = <&clk_sysin>;
 
@@ -146,7 +146,7 @@
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,plls-c32-cx_1", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll1";
 
 				clocks = <&clk_sysin>;
 
@@ -212,7 +212,7 @@
 
 		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9104000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -229,7 +229,7 @@
 
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen-audio", "st,flexgen";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
@@ -248,7 +248,7 @@
 
 		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9106000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -271,7 +271,7 @@
 
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen-video", "st,flexgen";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
@@ -309,7 +309,7 @@
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9107000 0x1000>;
 
 			clocks = <&clk_sysin>;
diff --git a/src/arm/stihxxx-b2120.dtsi b/src/arm/stihxxx-b2120.dtsi
index 133375bc8aa5..4b8f62f89664 100644
--- a/src/arm/stihxxx-b2120.dtsi
+++ b/src/arm/stihxxx-b2120.dtsi
@@ -18,14 +18,12 @@
 		leds {
 			compatible = "gpio-leds";
 			red {
-				#gpio-cells = <2>;
 				label = "Front Panel LED";
-				gpios = <&pio4 1 0>;
+				gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "heartbeat";
 			};
 			green {
-				#gpio-cells = <2>;
-				gpios = <&pio1 3 0>;
+				gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
 				default-state = "off";
 			};
 		};
@@ -65,6 +63,7 @@
 		};
 
 		mmc0: sdhci@09060000 {
+			non-removable;
 			status = "okay";
 		};
 
@@ -135,5 +134,67 @@
 				dvb-card	= <STV0367_TDA18212_NIMA_1>;
 			};
 		};
+
+		sti_uni_player0: sti-uni-player@8d80000 {
+			status = "okay";
+		};
+
+		sti_uni_player2: sti-uni-player@8d82000 {
+			status = "okay";
+		};
+
+		sti_uni_player3: sti-uni-player@8d85000 {
+			status = "okay";
+		};
+
+		sti_sasg_codec: sti-sasg-codec {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spdif_out>;
+		};
+
+		sound {
+			compatible = "simple-audio-card";
+			simple-audio-card,name = "STI-B2120";
+			status = "okay";
+
+			simple-audio-card,dai-link@0 {
+				/* HDMI */
+				format = "i2s";
+				mclk-fs = <128>;
+				cpu {
+					sound-dai = <&sti_uni_player0>;
+				};
+
+				codec {
+					sound-dai = <&sti_hdmi>;
+				};
+			};
+			simple-audio-card,dai-link@1 {
+				/* DAC */
+				format = "i2s";
+				mclk-fs = <256>;
+				frame-inversion = <1>;
+				cpu {
+					sound-dai = <&sti_uni_player2>;
+				};
+
+				codec {
+					sound-dai = <&sti_sasg_codec 1>;
+				};
+			};
+			simple-audio-card,dai-link@2 {
+				/* SPDIF */
+				format = "left_j";
+				mclk-fs = <128>;
+				cpu {
+					sound-dai = <&sti_uni_player3>;
+				};
+
+				codec {
+					sound-dai = <&sti_sasg_codec 0>;
+				};
+			};
+		};
 	};
 };
diff --git a/src/arm/stm32429i-eval.dts b/src/arm/stm32429i-eval.dts
index 6bfc5959dac3..5436e880e28f 100644
--- a/src/arm/stm32429i-eval.dts
+++ b/src/arm/stm32429i-eval.dts
@@ -47,6 +47,7 @@
 
 /dts-v1/;
 #include "stm32f429.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "STMicroelectronics STM32429i-EVAL board";
@@ -65,6 +66,10 @@
 		serial0 = &usart1;
 	};
 
+	soc {
+		dma-ranges = <0xc0000000 0x0 0x10000000>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		green {
@@ -82,6 +87,23 @@
 		};
 	};
 
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		button@0 {
+			label = "Wake up";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpioa 0 0>;
+		};
+		button@1 {
+			label = "Tamper";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpioc 13 0>;
+		};
+	};
+
 	usbotg_hs_phy: usbphy {
 		#phy-cells = <0>;
 		compatible = "usb-nop-xceiv";
@@ -94,11 +116,12 @@
 	clock-frequency = <25000000>;
 };
 
-&ethernet0 {
+&mac {
 	status = "okay";
-	pinctrl-0	= <&ethernet0_mii>;
+	pinctrl-0	= <&ethernet_mii>;
 	pinctrl-names	= "default";
-	phy-mode	= "mii-id";
+	phy-mode	= "mii";
+	phy-handle	= <&phy1>;
 	mdio0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/src/arm/stm32746g-eval.dts b/src/arm/stm32746g-eval.dts
new file mode 100644
index 000000000000..aa03fac1ec55
--- /dev/null
+++ b/src/arm/stm32746g-eval.dts
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f746.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "STMicroelectronics STM32746g-EVAL board";
+	compatible = "st,stm32746g-eval", "st,stm32f746";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0xc0000000 0x2000000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		green {
+			gpios = <&gpiof 10 1>;
+			linux,default-trigger = "heartbeat";
+		};
+		red {
+			gpios = <&gpiob 7 1>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		button@0 {
+			label = "Wake up";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpioc 13 0>;
+		};
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/src/arm/stm32f429-disco.dts b/src/arm/stm32f429-disco.dts
index 01408073dd53..7d0415e80668 100644
--- a/src/arm/stm32f429-disco.dts
+++ b/src/arm/stm32f429-disco.dts
@@ -47,6 +47,7 @@
 
 /dts-v1/;
 #include "stm32f429.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "STMicroelectronics STM32F429i-DISCO board";
@@ -75,6 +76,18 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		button@0 {
+			label = "User";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpioa 0 0>;
+		};
+	};
 };
 
 &clk_hse {
diff --git a/src/arm/stm32f429.dtsi b/src/arm/stm32f429.dtsi
index 35df462559ca..e4dae0eda3cd 100644
--- a/src/arm/stm32f429.dtsi
+++ b/src/arm/stm32f429.dtsi
@@ -45,6 +45,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include "skeleton.dtsi"
 #include "armv7-m.dtsi"
 #include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
 
@@ -55,11 +56,21 @@
 			compatible = "fixed-clock";
 			clock-frequency = <0>;
 		};
+
+		clk-lse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		clk-lsi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+		};
 	};
 
 	soc {
-		dma-ranges = <0xc0000000 0x0 0x10000000>;
-
 		timer2: timer@40000000 {
 			compatible = "st,stm32-timer";
 			reg = <0x40000000 0x400>;
@@ -121,6 +132,9 @@
 			interrupts = <39>;
 			clocks = <&rcc 0 146>;
 			status = "disabled";
+			dmas = <&dma1 1 4 0x400 0x0>,
+			       <&dma1 3 4 0x400 0x0>;
+			dma-names = "rx", "tx";
 		};
 
 		usart4: serial@40004c00 {
@@ -161,6 +175,9 @@
 			interrupts = <37>;
 			clocks = <&rcc 0 164>;
 			status = "disabled";
+			dmas = <&dma2 2 4 0x400 0x0>,
+			       <&dma2 7 4 0x400 0x0>;
+			dma-names = "rx", "tx";
 		};
 
 		usart6: serial@40011400 {
@@ -176,11 +193,26 @@
 			reg = <0x40013800 0x400>;
 		};
 
+		exti: interrupt-controller@40013c00 {
+			compatible = "st,stm32-exti";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x40013C00 0x400>;
+			interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
+		};
+
+		pwrcfg: power-config@40007000 {
+			compatible = "syscon";
+			reg = <0x40007000 0x400>;
+		};
+
 		pin-controller {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "st,stm32f429-pinctrl";
 			ranges = <0 0x40020000 0x3000>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&syscfg 0x8>;
 			pins-are-numbered;
 
 			gpioa: gpio@40020000 {
@@ -304,7 +336,7 @@
 				};
 			};
 
-			ethernet0_mii: mii@0 {
+			ethernet_mii: mii@0 {
 				pins {
 					pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
 						 <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
@@ -326,10 +358,12 @@
 		};
 
 		rcc: rcc@40023810 {
+			#reset-cells = <1>;
 			#clock-cells = <2>;
 			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
 			reg = <0x40023800 0x400>;
 			clocks = <&clk_hse>;
+			st,syscfg = <&pwrcfg>;
 		};
 
 		dma1: dma-controller@40026000 {
@@ -363,24 +397,22 @@
 			st,mem2mem;
 		};
 
-		ethernet0: dwmac@40028000 {
+		mac: ethernet@40028000 {
 			compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
 			reg = <0x40028000 0x8000>;
 			reg-names = "stmmaceth";
-			interrupts = <61>, <62>;
-			interrupt-names = "macirq", "eth_wake_irq";
-			clock-names = "stmmaceth", "tx-clk", "rx-clk";
+			interrupts = <61>;
+			interrupt-names = "macirq";
+			clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
 			clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
 			st,syscon = <&syscfg 0x4>;
 			snps,pbl = <8>;
 			snps,mixed-burst;
-			dma-ranges;
 			status = "disabled";
 		};
 
 		usbotg_hs: usb@40040000 {
 			compatible = "snps,dwc2";
-			dma-ranges;
 			reg = <0x40040000 0x40000>;
 			interrupts = <77>;
 			clocks = <&rcc 0 29>;
diff --git a/src/arm/stm32f469-disco.dts b/src/arm/stm32f469-disco.dts
index e911af836471..8877c00ce8e8 100644
--- a/src/arm/stm32f469-disco.dts
+++ b/src/arm/stm32f469-disco.dts
@@ -64,6 +64,14 @@
 	aliases {
 		serial0 = &usart3;
 	};
+
+	soc {
+		dma-ranges = <0xc0000000 0x0 0x10000000>;
+	};
+};
+
+&rcc {
+	compatible = "st,stm32f469-rcc", "st,stm32f42xx-rcc", "st,stm32-rcc";
 };
 
 &clk_hse {
diff --git a/src/arm/stm32f746.dtsi b/src/arm/stm32f746.dtsi
new file mode 100644
index 000000000000..f321ffe87144
--- /dev/null
+++ b/src/arm/stm32f746.dtsi
@@ -0,0 +1,304 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+#include "armv7-m.dtsi"
+#include <dt-bindings/pinctrl/stm32f746-pinfunc.h>
+
+/ {
+	clocks {
+		clk_hse: clk-hse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+	};
+
+	soc {
+		timer2: timer@40000000 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000000 0x400>;
+			interrupts = <28>;
+			clocks = <&rcc 0 128>;
+			status = "disabled";
+		};
+
+		timer3: timer@40000400 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000400 0x400>;
+			interrupts = <29>;
+			clocks = <&rcc 0 129>;
+			status = "disabled";
+		};
+
+		timer4: timer@40000800 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000800 0x400>;
+			interrupts = <30>;
+			clocks = <&rcc 0 130>;
+			status = "disabled";
+		};
+
+		timer5: timer@40000c00 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000c00 0x400>;
+			interrupts = <50>;
+			clocks = <&rcc 0 131>;
+		};
+
+		timer6: timer@40001000 {
+			compatible = "st,stm32-timer";
+			reg = <0x40001000 0x400>;
+			interrupts = <54>;
+			clocks = <&rcc 0 132>;
+			status = "disabled";
+		};
+
+		timer7: timer@40001400 {
+			compatible = "st,stm32-timer";
+			reg = <0x40001400 0x400>;
+			interrupts = <55>;
+			clocks = <&rcc 0 133>;
+			status = "disabled";
+		};
+
+		usart2: serial@40004400 {
+			compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+			reg = <0x40004400 0x400>;
+			interrupts = <38>;
+			clocks =  <&rcc 0 145>;
+			status = "disabled";
+		};
+
+		usart3: serial@40004800 {
+			compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+			reg = <0x40004800 0x400>;
+			interrupts = <39>;
+			clocks = <&rcc 0 146>;
+			status = "disabled";
+		};
+
+		usart4: serial@40004c00 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40004c00 0x400>;
+			interrupts = <52>;
+			clocks = <&rcc 0 147>;
+			status = "disabled";
+		};
+
+		usart5: serial@40005000 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40005000 0x400>;
+			interrupts = <53>;
+			clocks = <&rcc 0 148>;
+			status = "disabled";
+		};
+
+		usart7: serial@40007800 {
+			compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+			reg = <0x40007800 0x400>;
+			interrupts = <82>;
+			clocks = <&rcc 0 158>;
+			status = "disabled";
+		};
+
+		usart8: serial@40007c00 {
+			compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+			reg = <0x40007c00 0x400>;
+			interrupts = <83>;
+			clocks = <&rcc 0 159>;
+			status = "disabled";
+		};
+
+		usart1: serial@40011000 {
+			compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+			reg = <0x40011000 0x400>;
+			interrupts = <37>;
+			clocks = <&rcc 0 164>;
+			status = "disabled";
+		};
+
+		usart6: serial@40011400 {
+			compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+			reg = <0x40011400 0x400>;
+			interrupts = <71>;
+			clocks = <&rcc 0 165>;
+			status = "disabled";
+		};
+
+		syscfg: system-config@40013800 {
+			compatible = "syscon";
+			reg = <0x40013800 0x400>;
+		};
+
+		exti: interrupt-controller@40013c00 {
+			compatible = "st,stm32-exti";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x40013C00 0x400>;
+			interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
+		};
+
+		pin-controller {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32f746-pinctrl";
+			ranges = <0 0x40020000 0x3000>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&syscfg 0x8>;
+			pins-are-numbered;
+
+			gpioa: gpio@40020000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc 0 256>;
+				st,bank-name = "GPIOA";
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x400 0x400>;
+				clocks = <&rcc 0 257>;
+				st,bank-name = "GPIOB";
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x800 0x400>;
+				clocks = <&rcc 0 258>;
+				st,bank-name = "GPIOC";
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0xc00 0x400>;
+				clocks = <&rcc 0 259>;
+				st,bank-name = "GPIOD";
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc 0 260>;
+				st,bank-name = "GPIOE";
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1400 0x400>;
+				clocks = <&rcc 0 261>;
+				st,bank-name = "GPIOF";
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1800 0x400>;
+				clocks = <&rcc 0 262>;
+				st,bank-name = "GPIOG";
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1c00 0x400>;
+				clocks = <&rcc 0 263>;
+				st,bank-name = "GPIOH";
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc 0 264>;
+				st,bank-name = "GPIOI";
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x2400 0x400>;
+				clocks = <&rcc 0 265>;
+				st,bank-name = "GPIOJ";
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x2800 0x400>;
+				clocks = <&rcc 0 266>;
+				st,bank-name = "GPIOK";
+			};
+
+			usart1_pins_a: usart1@0 {
+				pins1 {
+					pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32F746_PA10_FUNC_USART1_RX>;
+					bias-disable;
+				};
+			};
+		};
+
+		rcc: rcc@40023800 {
+			#clock-cells = <2>;
+			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
+			reg = <0x40023800 0x400>;
+			clocks = <&clk_hse>;
+		};
+	};
+};
+
+&systick {
+	clocks = <&rcc 1 0>;
+	status = "okay";
+};
diff --git a/src/arm/sun4i-a10-a1000.dts b/src/arm/sun4i-a10-a1000.dts
index c92a1ae33a1e..39e368ec3428 100644
--- a/src/arm/sun4i-a10-a1000.dts
+++ b/src/arm/sun4i-a10-a1000.dts
@@ -72,8 +72,9 @@
 		};
 
 		blue {
-			label = "a1000:blue:usr";
+			label = "a1000:blue:pwr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
 		};
 	};
 
@@ -84,6 +85,7 @@
 		regulator-name = "emac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
 		enable-active-high;
 		gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/src/arm/sun4i-a10-ba10-tvbox.dts b/src/arm/sun4i-a10-ba10-tvbox.dts
index f3cb297fd1db..5f98582232d6 100644
--- a/src/arm/sun4i-a10-ba10-tvbox.dts
+++ b/src/arm/sun4i-a10-ba10-tvbox.dts
@@ -121,10 +121,6 @@
 	status = "okay";
 };
 
-&ohci1 {
-	status = "okay";
-};
-
 &otg_sram {
 	status = "okay";
 };
diff --git a/src/arm/sun4i-a10-hackberry.dts b/src/arm/sun4i-a10-hackberry.dts
index 2b17c5199151..6de83a6187d0 100644
--- a/src/arm/sun4i-a10-hackberry.dts
+++ b/src/arm/sun4i-a10-hackberry.dts
@@ -66,6 +66,7 @@
 		regulator-name = "emac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
 		enable-active-high;
 		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/src/arm/sun4i-a10-jesurun-q5.dts b/src/arm/sun4i-a10-jesurun-q5.dts
index 7afc7a64eef1..e28f080b1fd5 100644
--- a/src/arm/sun4i-a10-jesurun-q5.dts
+++ b/src/arm/sun4i-a10-jesurun-q5.dts
@@ -80,6 +80,7 @@
 		regulator-name = "emac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
 		enable-active-high;
 		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;   /* PH19 */
 	};
diff --git a/src/arm/sun4i-a10.dtsi b/src/arm/sun4i-a10.dtsi
index ca58eb279d55..b14a4281058d 100644
--- a/src/arm/sun4i-a10.dtsi
+++ b/src/arm/sun4i-a10.dtsi
@@ -65,9 +65,9 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
-			clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>,
-				 <&ahb_gates 43>, <&ahb_gates 44>,
-				 <&dram_gates 26>;
+			clocks = <&ahb_gates 36>, <&ahb_gates 43>,
+				 <&ahb_gates 44>, <&de_be0_clk>,
+				 <&tcon0_ch1_clk>, <&dram_gates 26>;
 			status = "disabled";
 		};
 
@@ -75,9 +75,9 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
-			clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>,
-				 <&ahb_gates 43>, <&ahb_gates 44>,
-				 <&ahb_gates 46>,
+			clocks = <&ahb_gates 36>, <&ahb_gates 43>,
+				 <&ahb_gates 44>, <&ahb_gates 46>,
+				 <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch1_clk>,
 				 <&dram_gates 25>, <&dram_gates 26>;
 			status = "disabled";
 		};
@@ -86,8 +86,8 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_fe0-de_be0-lcd0";
-			clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>,
-				 <&ahb_gates 44>, <&ahb_gates 46>,
+			clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&ahb_gates 46>,
+				 <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch0_clk>,
 				 <&dram_gates 25>, <&dram_gates 26>;
 			status = "disabled";
 		};
@@ -96,10 +96,11 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
-			clocks = <&pll3>, <&pll5 1>, <&ahb_gates 34>,
-				 <&ahb_gates 36>, <&ahb_gates 44>,
-				 <&ahb_gates 46>,
-				 <&dram_gates 5>, <&dram_gates 25>, <&dram_gates 26>;
+			clocks = <&ahb_gates 34>, <&ahb_gates 36>,
+				 <&ahb_gates 44>, <&ahb_gates 46>,
+				 <&de_be0_clk>, <&de_fe0_clk>,
+				 <&tcon0_ch1_clk>, <&dram_gates 5>,
+				 <&dram_gates 25>, <&dram_gates 26>;
 			status = "disabled";
 		};
 	};
@@ -577,6 +578,81 @@
 					     "dram_de_mp", "dram_ace";
 		};
 
+		de_be0_clk: clk@01c20104 {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c20104 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-be0";
+		};
+
+		de_be1_clk: clk@01c20108 {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c20108 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-be1";
+		};
+
+		de_fe0_clk: clk@01c2010c {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c2010c 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-fe0";
+		};
+
+		de_fe1_clk: clk@01c20110 {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c20110 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-fe1";
+		};
+
+
+		tcon0_ch0_clk: clk@01c20118 {
+			#clock-cells = <0>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
+			reg = <0x01c20118 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon0-ch0-sclk";
+
+		};
+
+		tcon1_ch0_clk: clk@01c2011c {
+			#clock-cells = <0>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
+			reg = <0x01c2011c 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon1-ch0-sclk";
+
+		};
+
+		tcon0_ch1_clk: clk@01c2012c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
+			reg = <0x01c2012c 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon0-ch1-sclk";
+
+		};
+
+		tcon1_ch1_clk: clk@01c20130 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
+			reg = <0x01c20130 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon1-ch1-sclk";
+
+		};
+
 		ve_clk: clk@01c2013c {
 			#clock-cells = <0>;
 			#reset-cells = <0>;
@@ -645,6 +721,19 @@
 			#dma-cells = <2>;
 		};
 
+		nfc: nand@01c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <37>;
+			clocks = <&ahb_gates 13>, <&nand_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 3>;
+			dma-names = "rxtx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		spi0: spi@01c05000 {
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c05000 0x1000>;
@@ -878,75 +967,69 @@
 			compatible = "allwinner,sun4i-a10-pinctrl";
 			reg = <0x01c20800 0x400>;
 			interrupts = <28>;
-			clocks = <&apb0_gates 5>;
+			clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
-			pwm0_pins_a: pwm0@0 {
-				allwinner,pins = "PB2";
-				allwinner,function = "pwm";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			pwm1_pins_a: pwm1@0 {
-				allwinner,pins = "PI3";
-				allwinner,function = "pwm";
+			emac_pins_a: emac0@0 {
+				allwinner,pins = "PA0", "PA1", "PA2",
+						"PA3", "PA4", "PA5", "PA6",
+						"PA7", "PA8", "PA9", "PA10",
+						"PA11", "PA12", "PA13", "PA14",
+						"PA15", "PA16";
+				allwinner,function = "emac";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart0_pins_a: uart0@0 {
-				allwinner,pins = "PB22", "PB23";
-				allwinner,function = "uart0";
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PB0", "PB1";
+				allwinner,function = "i2c0";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart0_pins_b: uart0@1 {
-				allwinner,pins = "PF2", "PF4";
-				allwinner,function = "uart0";
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PB18", "PB19";
+				allwinner,function = "i2c1";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart1_pins_a: uart1@0 {
-				allwinner,pins = "PA10", "PA11";
-				allwinner,function = "uart1";
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PB20", "PB21";
+				allwinner,function = "i2c2";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			i2c0_pins_a: i2c0@0 {
-				allwinner,pins = "PB0", "PB1";
-				allwinner,function = "i2c0";
+			ir0_rx_pins_a: ir0@0 {
+				allwinner,pins = "PB4";
+				allwinner,function = "ir0";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			i2c1_pins_a: i2c1@0 {
-				allwinner,pins = "PB18", "PB19";
-				allwinner,function = "i2c1";
+			ir0_tx_pins_a: ir0@1 {
+				allwinner,pins = "PB3";
+				allwinner,function = "ir0";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			i2c2_pins_a: i2c2@0 {
-				allwinner,pins = "PB20", "PB21";
-				allwinner,function = "i2c2";
+			ir1_rx_pins_a: ir1@0 {
+				allwinner,pins = "PB23";
+				allwinner,function = "ir1";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			emac_pins_a: emac0@0 {
-				allwinner,pins = "PA0", "PA1", "PA2",
-						"PA3", "PA4", "PA5", "PA6",
-						"PA7", "PA8", "PA9", "PA10",
-						"PA11", "PA12", "PA13", "PA14",
-						"PA15", "PA16";
-				allwinner,function = "emac";
+			ir1_tx_pins_a: ir1@1 {
+				allwinner,pins = "PB22";
+				allwinner,function = "ir1";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
@@ -966,34 +1049,41 @@
 				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
-			ir0_rx_pins_a: ir0@0 {
-				allwinner,pins = "PB4";
-				allwinner,function = "ir0";
+			ps20_pins_a: ps20@0 {
+				allwinner,pins = "PI20", "PI21";
+				allwinner,function = "ps2";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ir0_tx_pins_a: ir0@1 {
-				allwinner,pins = "PB3";
-				allwinner,function = "ir0";
+			ps21_pins_a: ps21@0 {
+				allwinner,pins = "PH12", "PH13";
+				allwinner,function = "ps2";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ir1_rx_pins_a: ir1@0 {
-				allwinner,pins = "PB23";
-				allwinner,function = "ir1";
+			pwm0_pins_a: pwm0@0 {
+				allwinner,pins = "PB2";
+				allwinner,function = "pwm";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ir1_tx_pins_a: ir1@1 {
-				allwinner,pins = "PB22";
-				allwinner,function = "ir1";
+			pwm1_pins_a: pwm1@0 {
+				allwinner,pins = "PI3";
+				allwinner,function = "pwm";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			spdif_tx_pins_a: spdif@0 {
+				allwinner,pins = "PB13";
+				allwinner,function = "spdif";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
 			spi0_pins_a: spi0@0 {
 				allwinner,pins = "PI11", "PI12", "PI13";
 				allwinner,function = "spi0";
@@ -1050,25 +1140,25 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ps20_pins_a: ps20@0 {
-				allwinner,pins = "PI20", "PI21";
-				allwinner,function = "ps2";
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PB22", "PB23";
+				allwinner,function = "uart0";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ps21_pins_a: ps21@0 {
-				allwinner,pins = "PH12", "PH13";
-				allwinner,function = "ps2";
+			uart0_pins_b: uart0@1 {
+				allwinner,pins = "PF2", "PF4";
+				allwinner,function = "uart0";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			spdif_tx_pins_a: spdif@0 {
-				allwinner,pins = "PB13";
-				allwinner,function = "spdif";
+			uart1_pins_a: uart1@0 {
+				allwinner,pins = "PA10", "PA11";
+				allwinner,function = "uart1";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
diff --git a/src/arm/sun5i-a10s-auxtek-t004.dts b/src/arm/sun5i-a10s-auxtek-t004.dts
index a790ec8adb75..2150e15e115a 100644
--- a/src/arm/sun5i-a10s-auxtek-t004.dts
+++ b/src/arm/sun5i-a10s-auxtek-t004.dts
@@ -124,7 +124,18 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PG12";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
 	mmc0_cd_pin_t004: mmc0_cd_pin@0 {
 		allwinner,pins = "PG1";
 		allwinner,function = "gpio_in";
@@ -158,11 +169,19 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usb1_vbus_pin_a {
 	allwinner,pins = "PG13";
 };
 
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
diff --git a/src/arm/sun5i-a10s-mk802.dts b/src/arm/sun5i-a10s-mk802.dts
index 46ff9407826d..c84ac005342e 100644
--- a/src/arm/sun5i-a10s-mk802.dts
+++ b/src/arm/sun5i-a10s-mk802.dts
@@ -73,6 +73,20 @@
 	status = "okay";
 };
 
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp152: pmic@30 {
+		compatible = "x-powers,axp152";
+		reg = <0x30>;
+		interrupts = <0>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>;
@@ -83,10 +97,23 @@
 	status = "okay";
 };
 
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
 &ohci0 {
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	led_pins_mk802: led_pins@0 {
 		allwinner,pins = "PB2";
@@ -122,6 +149,11 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
 &usbphy {
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
diff --git a/src/arm/sun5i-a10s-olinuxino-micro.dts b/src/arm/sun5i-a10s-olinuxino-micro.dts
index 86d046a502e6..0684d7930d65 100644
--- a/src/arm/sun5i-a10s-olinuxino-micro.dts
+++ b/src/arm/sun5i-a10s-olinuxino-micro.dts
@@ -248,6 +248,13 @@
 	status = "okay";
 };
 
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_b>,
+		    <&spi2_cs0_pins_b>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
diff --git a/src/arm/sun5i-a10s-wobo-i5.dts b/src/arm/sun5i-a10s-wobo-i5.dts
index 9fea918f949e..b5de75f4c710 100644
--- a/src/arm/sun5i-a10s-wobo-i5.dts
+++ b/src/arm/sun5i-a10s-wobo-i5.dts
@@ -79,6 +79,7 @@
 		regulator-name = "emac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
 		enable-active-high;
 		gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>;
 	};
@@ -195,7 +196,14 @@
 	regulator-always-on;
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
-	regulator-name = "vcc-wifi";
+	regulator-name = "vcc-wifi1";
+};
+
+&reg_ldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi2";
 };
 
 &reg_usb1_vbus {
diff --git a/src/arm/sun5i-a10s.dtsi b/src/arm/sun5i-a10s.dtsi
index 367f33012493..7aa8c7aa0153 100644
--- a/src/arm/sun5i-a10s.dtsi
+++ b/src/arm/sun5i-a10s.dtsi
@@ -242,6 +242,20 @@
 		allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	spi2_pins_b: spi2@1 {
+		allwinner,pins = "PB12", "PB13", "PB14";
+		allwinner,function = "spi2";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	spi2_cs0_pins_b: spi2_cs0@1 {
+		allwinner,pins = "PB11";
+		allwinner,function = "spi2";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 };
 
 &sram_a {
diff --git a/src/arm/sun5i-a13-difrnce-dit4350.dts b/src/arm/sun5i-a13-difrnce-dit4350.dts
index 6546fa02901d..894c4c4f9a1f 100644
--- a/src/arm/sun5i-a13-difrnce-dit4350.dts
+++ b/src/arm/sun5i-a13-difrnce-dit4350.dts
@@ -42,185 +42,9 @@
 
 /dts-v1/;
 #include "sun5i-a13.dtsi"
-#include "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-#include <dt-bindings/pwm/pwm.h>
+#include "sun5i-reference-design-tablet.dtsi"
 
 / {
 	model = "Difrnce DIT4350";
 	compatible = "difrnce,dit4350", "allwinner,sun5i-a13";
-
-	aliases {
-		serial0 = &uart1;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-		default-brightness-level = <8>;
-		/* TODO: backlight uses axp gpio1 as enable pin */
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&reg_dcdc2>;
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-
-	axp209: pmic@34 {
-		reg = <0x34>;
-		interrupts = <0>;
-	};
-};
-
-#include "axp209.dtsi"
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
-	status = "okay";
-
-	pcf8563: rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&lradc {
-	vref-supply = <&reg_ldo2>;
-	status = "okay";
-
-	button@200 {
-		label = "Volume Up";
-		linux,code = <KEY_VOLUMEUP>;
-		channel = <0>;
-		voltage = <200000>;
-	};
-
-	button@400 {
-		label = "Volume Down";
-		linux,code = <KEY_VOLUMEDOWN>;
-		channel = <0>;
-		voltage = <400000>;
-	};
-};
-
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>;
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <4>;
-	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
-	cd-inverted;
-	status = "okay";
-};
-
-&otg_sram {
-	status = "okay";
-};
-
-&pio {
-	mmc0_cd_pin_d709: mmc0_cd_pin@0 {
-		allwinner,pins = "PG0";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		allwinner,pins = "PG1";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		allwinner,pins = "PG2";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins>;
-	status = "okay";
-};
-
-&reg_dcdc2 {
-	regulator-always-on;
-	regulator-min-microvolt = <1000000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc3 {
-	regulator-always-on;
-	regulator-min-microvolt = <1250000>;
-	regulator-max-microvolt = <1250000>;
-	regulator-name = "vdd-int-pll";
-};
-
-&reg_ldo1 {
-	regulator-name = "vdd-rtc";
-};
-
-&reg_ldo2 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "avcc";
-};
-
-&reg_ldo3 {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "vcc-wifi";
-};
-
-&reg_usb0_vbus {
-	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>;
-	status = "okay";
-};
-
-&usb_otg {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usb0_vbus_pin_a {
-	allwinner,pins = "PG12";
-};
-
-&usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
-	usb0_vbus-supply = <&reg_usb0_vbus>;
-	usb1_vbus-supply = <&reg_ldo3>;
-	status = "okay";
 };
diff --git a/src/arm/sun5i-a13-empire-electronix-m712.dts b/src/arm/sun5i-a13-empire-electronix-m712.dts
new file mode 100644
index 000000000000..b1e2afd9de52
--- /dev/null
+++ b/src/arm/sun5i-a13-empire-electronix-m712.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Empire Electronix M712 tablet";
+	compatible = "empire-electronix,m712", "allwinner,sun5i-a13";
+};
diff --git a/src/arm/sun5i-a13-inet-98v-rev2.dts b/src/arm/sun5i-a13-inet-98v-rev2.dts
index 1b11ec95ae53..439ae3b537df 100644
--- a/src/arm/sun5i-a13-inet-98v-rev2.dts
+++ b/src/arm/sun5i-a13-inet-98v-rev2.dts
@@ -42,171 +42,9 @@
 
 /dts-v1/;
 #include "sun5i-a13.dtsi"
-#include "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sun5i-reference-design-tablet.dtsi"
 
 / {
 	model = "INet-98V Rev 02";
 	compatible = "primux,inet98v-rev2", "allwinner,sun5i-a13";
-
-	aliases {
-		serial0 = &uart1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-};
-
-&cpu0 {
-	cpu-supply = <&reg_dcdc2>;
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-
-	axp209: pmic@34 {
-		reg = <0x34>;
-		interrupts = <0>;
-	};
-};
-
-#include "axp209.dtsi"
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
-	status = "okay";
-
-	pcf8563: rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&lradc {
-	vref-supply = <&reg_ldo2>;
-	status = "okay";
-
-	button@200 {
-		label = "Volume Up";
-		linux,code = <KEY_VOLUMEUP>;
-		channel = <0>;
-		voltage = <200000>;
-	};
-
-	button@400 {
-		label = "Volume Down";
-		linux,code = <KEY_VOLUMEDOWN>;
-		channel = <0>;
-		voltage = <400000>;
-	};
-};
-
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet98fv2>;
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <4>;
-	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
-	cd-inverted;
-	status = "okay";
-};
-
-&otg_sram {
-	status = "okay";
-};
-
-&pio {
-	mmc0_cd_pin_inet98fv2: mmc0_cd_pin@0 {
-		allwinner,pins = "PG0";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		allwinner,pins = "PG1";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		allwinner,pins = "PG2";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-};
-
-&reg_dcdc2 {
-	regulator-always-on;
-	regulator-min-microvolt = <1000000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc3 {
-	regulator-always-on;
-	regulator-min-microvolt = <1250000>;
-	regulator-max-microvolt = <1250000>;
-	regulator-name = "vdd-int-pll";
-};
-
-&reg_ldo1 {
-	regulator-name = "vdd-rtc";
-};
-
-&reg_ldo2 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "avcc";
-};
-
-&reg_ldo3 {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "vcc-wifi";
-};
-
-&reg_usb0_vbus {
-	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>;
-	status = "okay";
-};
-
-&usb_otg {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usb0_vbus_pin_a {
-	allwinner,pins = "PG12";
-};
-
-&usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
-	usb0_vbus-supply = <&reg_usb0_vbus>;
-	usb1_vbus-supply = <&reg_ldo3>;
-	status = "okay";
 };
diff --git a/src/arm/sun5i-a13-olinuxino.dts b/src/arm/sun5i-a13-olinuxino.dts
index b3c234c65ea1..bb7210e0e4a9 100644
--- a/src/arm/sun5i-a13-olinuxino.dts
+++ b/src/arm/sun5i-a13-olinuxino.dts
@@ -72,6 +72,47 @@
 			default-state = "on";
 		};
 	};
+
+	bridge {
+		compatible = "dumb-vga-dac";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&tcon0_out_vga>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+};
+
+&be0 {
+	status = "okay";
 };
 
 &ehci0 {
@@ -211,6 +252,19 @@
 	status = "okay";
 };
 
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_vga: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&vga_bridge_in>;
+	};
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins_b>;
diff --git a/src/arm/sun5i-a13-q8-tablet.dts b/src/arm/sun5i-a13-q8-tablet.dts
index 72e93acb5a9e..a89f29fa3e40 100644
--- a/src/arm/sun5i-a13-q8-tablet.dts
+++ b/src/arm/sun5i-a13-q8-tablet.dts
@@ -42,19 +42,45 @@
 
 /dts-v1/;
 #include "sun5i-a13.dtsi"
-#include "sun5i-q8-common.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
 
 / {
 	model = "Q8 A13 Tablet";
 	compatible = "allwinner,q8-a13", "allwinner,sun5i-a13";
+
+	panel: panel {
+		compatible = "urt,umsh-8596md-t", "simple-panel";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			/* TODO: lcd panel uses axp gpio0 as enable pin */
+			backlight = <&backlight>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&tcon0_out_lcd>;
+			};
+		};
+	};
+};
+
+&be0 {
+	status = "okay";
 };
 
-&reg_ldo3 {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "vcc-wifi";
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+	status = "okay";
 };
 
-&usbphy {
-	usb1_vbus-supply = <&reg_ldo3>;
+&tcon0_out {
+	tcon0_out_lcd: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&panel_input>;
+	};
 };
diff --git a/src/arm/sun5i-a13-utoo-p66.dts b/src/arm/sun5i-a13-utoo-p66.dts
index fa9ddfdcfe96..3d7ff10a48e9 100644
--- a/src/arm/sun5i-a13-utoo-p66.dts
+++ b/src/arm/sun5i-a13-utoo-p66.dts
@@ -42,24 +42,20 @@
 
 /dts-v1/;
 #include "sun5i-a13.dtsi"
-#include "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "sun5i-reference-design-tablet.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "Utoo P66";
 	compatible = "utoo,p66", "allwinner,sun5i-a13";
 
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-		/* Note levels of 10 / 20% result in backlight off */
-		brightness-levels = <0 30 40 50 60 70 80 90 100>;
-		default-brightness-level = <6>;
-		/* TODO: backlight uses axp gpio1 as enable pin */
+	/* The P66 uses the uart pins as gpios */
+	aliases {
+		/delete-property/serial0;
+	};
+
+	chosen {
+		/delete-property/stdout-path;
 	};
 
 	i2c_lcd: i2c@0 {
@@ -73,86 +69,18 @@
 	};
 };
 
-&codec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&codec_pa_pin>;
-	allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */
-	status = "okay";
-};
-
-&cpu0 {
-	cpu-supply = <&reg_dcdc2>;
-};
-
-&ehci0 {
-	status = "okay";
+&backlight {
+	/* Note levels of 10 / 20% result in backlight off */
+	brightness-levels = <0 30 40 50 60 70 80 90 100>;
+	default-brightness-level = <6>;
 };
 
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-
-	axp209: pmic@34 {
-		reg = <0x34>;
-		interrupts = <0>;
-	};
-};
-
-#include "axp209.dtsi"
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
-	status = "okay";
-
-	icn8318: touchscreen@40 {
-		compatible = "chipone,icn8318";
-		reg = <0x40>;
-		interrupt-parent = <&pio>;
-		interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_wake_pin_p66>;
-		wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
-		touchscreen-size-x = <800>;
-		touchscreen-size-y = <480>;
-		touchscreen-inverted-x;
-		touchscreen-swapped-x-y;
-	};
-
-	pcf8563: rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&lradc {
-	vref-supply = <&reg_ldo2>;
-	status = "okay";
-
-	button@200 {
-		label = "Volume Up";
-		linux,code = <KEY_VOLUMEUP>;
-		channel = <0>;
-		voltage = <200000>;
-	};
-
-	button@400 {
-		label = "Volume Down";
-		linux,code = <KEY_VOLUMEDOWN>;
-		channel = <0>;
-		voltage = <400000>;
-	};
+&codec {
+	allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */
 };
 
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_p66>;
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <4>;
-	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
-	cd-inverted;
-	status = "okay";
+&codec_pa_pin {
+	allwinner,pins = "PG3";
 };
 
 &mmc2 {
@@ -170,114 +98,38 @@
 	};
 };
 
-&otg_sram {
-	status = "okay";
-};
-
 &pio {
-	codec_pa_pin: codec_pa_pin@0 {
-		allwinner,pins = "PG3";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-
-	mmc0_cd_pin_p66: mmc0_cd_pin@0 {
-		allwinner,pins = "PG0";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		allwinner,pins = "PG1";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		allwinner,pins = "PG2";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-
 	i2c_lcd_pins: i2c_lcd_pin@0 {
 		allwinner,pins = "PG10", "PG12";
 		allwinner,function = "gpio_out";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
-
-	ts_wake_pin_p66: ts_wake_pin@0 {
-		allwinner,pins = "PB3";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-
-	usb0_vbus_pin_a: usb0_vbus_pin@0 {
-		allwinner,pins = "PB4";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins>;
-	status = "okay";
-};
-
-&reg_dcdc2 {
-	regulator-always-on;
-	regulator-min-microvolt = <1000000>;
-	regulator-max-microvolt = <1500000>;
-	regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc3 {
-	regulator-always-on;
-	regulator-min-microvolt = <1000000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-int-pll";
-};
-
-&reg_ldo1 {
-	regulator-name = "vdd-rtc";
-};
-
-&reg_ldo2 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "avcc";
-};
-
-&reg_ldo3 {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "vcc-wifi";
 };
 
 &reg_usb0_vbus {
 	gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-	status = "okay";
 };
 
-&usb_otg {
-	dr_mode = "otg";
+&touchscreen {
+	compatible = "chipone,icn8318";
+	reg = <0x40>;
+	/* The P66 uses a different EINT then the reference design */
+	interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+	/* The icn8318 binding expects wake-gpios instead of power-gpios */
+	wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	touchscreen-size-x = <800>;
+	touchscreen-size-y = <480>;
+	touchscreen-inverted-x;
+	touchscreen-swapped-x-y;
 	status = "okay";
 };
 
-&usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
-	usb0_vbus-supply = <&reg_usb0_vbus>;
-	usb1_vbus-supply = <&reg_ldo3>;
-	status = "okay";
+&uart1 {
+	/* The P66 uses the uart pins as gpios */
+	status = "disabled";
+};
+
+&usb0_vbus_pin_a {
+	allwinner,pins = "PB4";
 };
diff --git a/src/arm/sun5i-a13.dtsi b/src/arm/sun5i-a13.dtsi
index 263d46dbc7e6..a17ba0243db3 100644
--- a/src/arm/sun5i-a13.dtsi
+++ b/src/arm/sun5i-a13.dtsi
@@ -84,7 +84,7 @@
 			trips {
 				cpu_alert0: cpu_alert0 {
 					/* milliCelsius */
-					temperature = <850000>;
+					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
@@ -207,7 +207,50 @@
 		};
 	};
 
+	display-engine {
+		compatible = "allwinner,sun5i-a13-display-engine";
+		allwinner,pipelines = <&fe0>;
+	};
+
 	soc@01c00000 {
+		tcon0: lcd-controller@01c0c000 {
+			compatible = "allwinner,sun5i-a13-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <44>;
+			resets = <&tcon_ch0_clk 1>;
+			reset-names = "lcd";
+			clocks = <&ahb_gates 36>,
+				 <&tcon_ch0_clk>,
+				 <&tcon_ch1_clk>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon-pixel-clock";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
+		};
+
 		pwm: pwm@01c20e00 {
 			compatible = "allwinner,sun5i-a13-pwm";
 			reg = <0x01c20e00 0xc>;
@@ -215,6 +258,75 @@
 			#pwm-cells = <3>;
 			status = "disabled";
 		};
+
+		fe0: display-frontend@01e00000 {
+			compatible = "allwinner,sun5i-a13-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <47>;
+			clocks = <&ahb_gates 46>, <&de_fe_clk>,
+				 <&dram_gates 25>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_fe_clk>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@01e60000 {
+			compatible = "allwinner,sun5i-a13-display-backend";
+			reg = <0x01e60000 0x10000>;
+			clocks = <&ahb_gates 44>, <&de_be_clk>,
+				 <&dram_gates 26>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_be_clk>;
+			status = "disabled";
+
+			assigned-clocks = <&de_be_clk>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be0>;
+					};
+				};
+			};
+		};
 	};
 };
 
@@ -237,6 +349,16 @@
 &pio {
 	compatible = "allwinner,sun5i-a13-pinctrl";
 
+	lcd_rgb666_pins: lcd_rgb666@0 {
+		allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+				 "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+				 "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+				 "PD24", "PD25", "PD26", "PD27";
+		allwinner,function = "lcd0";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
 	uart1_pins_a: uart1@0 {
 		allwinner,pins = "PE10", "PE11";
 		allwinner,function = "uart1";
diff --git a/src/arm/sun5i-gr8-chip-pro.dts b/src/arm/sun5i-gr8-chip-pro.dts
new file mode 100644
index 000000000000..92a2dc6250a5
--- /dev/null
+++ b/src/arm/sun5i-gr8-chip-pro.dts
@@ -0,0 +1,266 @@
+/*
+ * Copyright 2016 Free Electrons
+ * Copyright 2016 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-gr8.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NextThing C.H.I.P. Pro";
+	compatible = "nextthing,chip-pro", "nextthing,gr8";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "chip-pro:white:status";
+			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	mmc0_pwrseq: mmc0_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_pin_chip_pro>;
+		reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+
+		/*
+		* The interrupt is routed through the "External Fast
+		* Interrupt Request" pin (ball G13 of the module)
+		* directly to the main interrupt controller, without
+		* any other controller interfering.
+		*/
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "disabled";
+};
+
+&i2s0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>;
+	status = "disabled";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc0_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
+	status = "okay";
+
+	nand@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0>;
+		allwinner,rb = <0>;
+		nand-ecc-mode = "hw";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_pin_chip_pro: usb0-id-pin@0 {
+		allwinner,pins = "PG2";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	wifi_reg_on_pin_chip_pro: wifi-reg-on-pin@0 {
+		allwinner,pins = "PB10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins>;
+	status = "disabled";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+	regulator-always-on;
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+	regulator-always-on;
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+	regulator-always-on;
+};
+
+/*
+ * Both LDO3 and LDO4 are used in parallel to power up the
+ * WiFi/BT chip.
+ */
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-1";
+	regulator-always-on;
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-2";
+	regulator-always-on;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_a>, <&uart1_cts_rts_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_a>, <&uart2_cts_rts_pins_a>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_a>, <&uart3_cts_rts_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * The CHIP Pro doesn't have a controllable VBUS, nor does it
+	 * have any 5v rail on the board itself.
+	 *
+	 * If one wants to use it as a true OTG port, it should be
+	 * done in the baseboard, and its DT / overlay will add it.
+	 */
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_pin_chip_pro>;
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/src/arm/sun5i-gr8-evb.dts b/src/arm/sun5i-gr8-evb.dts
new file mode 100644
index 000000000000..030605aa8065
--- /dev/null
+++ b/src/arm/sun5i-gr8-evb.dts
@@ -0,0 +1,375 @@
+/*
+ * Copyright 2016 Free Electrons
+ * Copyright 2016 NextThing Co
+ *
+ * Mylène Josserand <mylene.josserand@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-gr8.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NextThing GR8-EVB";
+	compatible = "nextthing,gr8-evb", "nextthing,gr8";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 10000 0>;
+		enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
+
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+	};
+
+	sound-analog {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "gr8-evb-wm8978";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <512>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8978>;
+		};
+	};
+
+	sound-spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+
+		/*
+		* The interrupt is routed through the "External Fast
+		* Interrupt Request" pin (ball G13 of the module)
+		* directly to the main interrupt controller, without
+		* any other controller interfering.
+		*/
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	wm8978: codec@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8978";
+		reg = <0x1a>;
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "phg,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&i2s0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button@190 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+
+	button@390 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <390000>;
+	};
+
+	button@600 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button@800 {
+		label = "Search";
+		linux,code = <KEY_SEARCH>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button@980 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <980000>;
+	};
+
+	button@1180 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1180000>;
+	};
+
+	button@1400 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <1400000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gr8_evb>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
+
+	/* MLC Support sucks for now */
+	status = "disabled";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_gr8_evb: mmc0-cd-pin@0 {
+		allwinner,pins = "PG0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_id_pin_gr8_evb: usb0-id-pin@0 {
+		allwinner,pins = "PG2";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_vbus_det_pin_gr8_evb: usb0-vbus-det-pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_gr8_evb: usb1-vbus-pin@0 {
+		allwinner,pins = "PG13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+	regulator-always-on;
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+	regulator-always-on;
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+	regulator-always-on;
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_gr8_evb>;
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&rtp {
+	allwinner,ts-attached;
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pins_a>;
+	status = "okay";
+};
+
+&tve0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_a>, <&uart1_cts_rts_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * The GR8-EVB has a somewhat interesting design. There's a
+	 * pin supposed to control VBUS, an ID pin, a VBUS detect pin,
+	 * so everything should work just fine.
+	 *
+	 * Except that the pin supposed to control VBUS is not
+	 * connected to any controllable output, neither to the SoC
+	 * through a GPIO or to the PMIC, and it is pulled down,
+	 * meaning that we will never be able to enable VBUS on this
+	 * board.
+	 */
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_pin_gr8_evb>, <&usb0_vbus_det_pin_gr8_evb>;
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/src/arm/sun5i-gr8.dtsi b/src/arm/sun5i-gr8.dtsi
new file mode 100644
index 000000000000..ea86d4d58db6
--- /dev/null
+++ b/src/arm/sun5i-gr8.dtsi
@@ -0,0 +1,1132 @@
+/*
+ * Copyright 2016 Mylène Josserand
+ *
+ * Mylène Josserand <mylene.josserand@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/sun4i-a10-pll2.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+			clocks = <&cpu>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * This is a dummy clock, to be used as placeholder on
+		 * other mux clocks when a specific parent clock is not
+		 * yet implemented. It should be dropped when the driver
+		 * is complete.
+		 */
+		dummy: dummy {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		osc24M: clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-osc-clk";
+			reg = <0x01c20050 0x4>;
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc3M: osc3M-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+			clocks = <&osc24M>;
+			clock-output-names = "osc3M";
+		};
+
+		osc32k: clk@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		pll1: clk@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll1";
+		};
+
+		pll2: clk@01c20008 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun5i-a13-pll2-clk";
+			reg = <0x01c20008 0x8>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll2-1x", "pll2-2x",
+					     "pll2-4x", "pll2-8x";
+		};
+
+		pll3: clk@01c20010 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll3-clk";
+			reg = <0x01c20010 0x4>;
+			clocks = <&osc3M>;
+			clock-output-names = "pll3";
+		};
+
+		pll3x2: pll3x2-clk {
+			compatible = "allwinner,sun4i-a10-pll3-2x-clk";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <2>;
+			clocks = <&pll3>;
+			clock-output-names = "pll3-2x";
+		};
+
+		pll4: clk@01c20018 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll1-clk";
+			reg = <0x01c20018 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll4";
+		};
+
+		pll5: clk@01c20020 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll5-clk";
+			reg = <0x01c20020 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll5_ddr", "pll5_other";
+		};
+
+		pll6: clk@01c20028 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll6-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6_sata", "pll6_other", "pll6";
+		};
+
+		pll7: clk@01c20030 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll3-clk";
+			reg = <0x01c20030 0x4>;
+			clocks = <&osc3M>;
+			clock-output-names = "pll7";
+		};
+
+		pll7x2: pll7x2-clk {
+			compatible = "allwinner,sun4i-a10-pll3-2x-clk";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <2>;
+			clocks = <&pll7>;
+			clock-output-names = "pll7-2x";
+		};
+
+		/* dummy is 200M */
+		cpu: cpu@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-cpu-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+			clock-output-names = "cpu";
+		};
+
+		axi: axi@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-axi-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&cpu>;
+			clock-output-names = "axi";
+		};
+
+		ahb: ahb@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun5i-a13-ahb-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&axi>, <&cpu>, <&pll6 1>;
+			clock-output-names = "ahb";
+			/*
+			 * Use PLL6 as parent, instead of CPU/AXI
+			 * which has rate changes due to cpufreq
+			 */
+			assigned-clocks = <&ahb>;
+			assigned-clock-parents = <&pll6 1>;
+		};
+
+		apb0: apb0@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb>;
+			clock-output-names = "apb0";
+		};
+
+		apb1: clk@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb1-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+			clock-output-names = "apb1";
+		};
+
+		axi_gates: clk@01c2005c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-gates-clk";
+			reg = <0x01c2005c 0x4>;
+			clocks = <&axi>;
+			clock-indices = <0>;
+			clock-output-names = "axi_dram";
+		};
+
+		ahb_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun5i-a13-ahb-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb>;
+			clock-indices = <0>, <1>,
+					<2>, <5>, <6>,
+					<7>, <8>, <9>,
+					<10>, <13>,
+					<14>, <17>, <20>,
+					<21>, <22>,
+					<28>, <32>, <34>,
+					<36>, <40>, <44>,
+					<46>, <51>,
+					<52>;
+			clock-output-names = "ahb_usbotg", "ahb_ehci",
+					     "ahb_ohci", "ahb_ss", "ahb_dma",
+					     "ahb_bist", "ahb_mmc0", "ahb_mmc1",
+					     "ahb_mmc2", "ahb_nand",
+					     "ahb_sdram", "ahb_emac", "ahb_spi0",
+					     "ahb_spi1", "ahb_spi2",
+					     "ahb_hstimer", "ahb_ve", "ahb_tve",
+					     "ahb_lcd", "ahb_csi", "ahb_de_be",
+					     "ahb_de_fe", "ahb_iep",
+					     "ahb_mali400";
+		};
+
+		apb0_gates: clk@01c20068 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb0>;
+			clock-indices = <0>, <3>,
+					<5>, <6>;
+			clock-output-names = "apb0_codec", "apb0_i2s0",
+					     "apb0_pio", "apb0_ir";
+		};
+
+		apb1_gates: clk@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-gates-clk";
+			reg = <0x01c2006c 0x4>;
+			clocks = <&apb1>;
+			clock-indices = <0>, <1>,
+					<2>, <17>,
+					<18>, <19>;
+			clock-output-names = "apb1_i2c0", "apb1_i2c1",
+					     "apb1_i2c2", "apb1_uart1",
+					     "apb1_uart2", "apb1_uart3";
+		};
+
+		nand_clk: clk@01c20080 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20080 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "nand";
+		};
+
+		ms_clk: clk@01c20084 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20084 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ms";
+		};
+
+		mmc0_clk: clk@01c20088 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20088 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
+		};
+
+		mmc1_clk: clk@01c2008c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c2008c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
+		};
+
+		mmc2_clk: clk@01c20090 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20090 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
+		};
+
+		ts_clk: clk@01c20098 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20098 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ts";
+		};
+
+		ss_clk: clk@01c2009c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c2009c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ss";
+		};
+
+		spi0_clk: clk@01c200a0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a0 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi0";
+		};
+
+		spi1_clk: clk@01c200a4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a4 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi1";
+		};
+
+		spi2_clk: clk@01c200a8 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a8 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi2";
+		};
+
+		ir0_clk: clk@01c200b0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200b0 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ir0";
+		};
+
+		i2s0_clk: clk@01c200b8 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod1-clk";
+			reg = <0x01c200b8 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+				 <&pll2 SUN4I_A10_PLL2_4X>,
+				 <&pll2 SUN4I_A10_PLL2_2X>,
+				 <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "i2s0";
+		};
+
+		spdif_clk: clk@01c200c0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod1-clk";
+			reg = <0x01c200c0 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+				 <&pll2 SUN4I_A10_PLL2_4X>,
+				 <&pll2 SUN4I_A10_PLL2_2X>,
+				 <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "spdif";
+		};
+
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&pll6 1>;
+			clock-output-names = "usb_ohci0", "usb_phy";
+		};
+
+		dram_gates: clk@01c20100 {
+			#clock-cells = <1>;
+			compatible = "nextthing,gr8-dram-gates-clk",
+				     "allwinner,sun4i-a10-gates-clk";
+			reg = <0x01c20100 0x4>;
+			clocks = <&pll5 0>;
+			clock-indices = <0>,
+					<1>,
+					<25>,
+					<26>,
+					<29>,
+					<31>;
+			clock-output-names = "dram_ve",
+					     "dram_csi",
+					     "dram_de_fe",
+					     "dram_de_be",
+					     "dram_ace",
+					     "dram_iep";
+		};
+
+		de_be_clk: clk@01c20104 {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c20104 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-be";
+		};
+
+		de_fe_clk: clk@01c2010c {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c2010c 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-fe";
+		};
+
+		tcon_ch0_clk: clk@01c20118 {
+			#clock-cells = <0>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
+			reg = <0x01c20118 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon-ch0-sclk";
+		};
+
+		tcon_ch1_clk: clk@01c2012c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
+			reg = <0x01c2012c 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon-ch1-sclk";
+		};
+
+		codec_clk: clk@01c20140 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec-clk";
+			reg = <0x01c20140 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "codec";
+		};
+
+		mbus_clk: clk@01c2015c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun5i-a13-mbus-clk";
+			reg = <0x01c2015c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mbus";
+		};
+	};
+
+	display-engine {
+		compatible = "allwinner,sun5i-a13-display-engine";
+		allwinner,pipelines = <&fe0>;
+	};
+
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		sram-controller@01c00000 {
+			compatible = "allwinner,sun4i-a10-sram-controller";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a: sram@00000000 {
+				compatible = "mmio-sram";
+				reg = <0x00000000 0xc000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00000000 0xc000>;
+			};
+
+			sram_d: sram@00010000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0000 {
+					compatible = "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+		};
+
+		dma: dma-controller@01c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <27>;
+			clocks = <&ahb_gates 6>;
+			#dma-cells = <2>;
+		};
+
+		nfc: nand@01c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <37>;
+			clocks = <&ahb_gates 13>, <&nand_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 3>;
+			dma-names = "rxtx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@01c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ahb_gates 20>, <&spi0_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@01c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ahb_gates 21>, <&spi1_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tve0: tv-encoder@01c0a000 {
+			compatible = "allwinner,sun4i-a10-tv-encoder";
+			reg = <0x01c0a000 0x1000>;
+			clocks = <&ahb_gates 34>;
+			resets = <&tcon_ch0_clk 0>;
+			status = "disabled";
+
+			port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tve0_in_tcon0: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&tcon0_out_tve0>;
+				};
+			};
+		};
+
+		tcon0: lcd-controller@01c0c000 {
+			compatible = "allwinner,sun5i-a13-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <44>;
+			resets = <&tcon_ch0_clk 1>;
+			reset-names = "lcd";
+			clocks = <&ahb_gates 36>,
+				 <&tcon_ch0_clk>,
+				 <&tcon_ch1_clk>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon-pixel-clock";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_tve0: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tve0_in_tcon0>;
+					};
+				};
+			};
+		};
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ahb_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <32>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ahb_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <33>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ahb_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <34>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@01c13000 {
+			compatible = "allwinner,sun4i-a10-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ahb_gates 0>;
+			interrupts = <38>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			status = "disabled";
+
+			dr_mode = "otg";
+		};
+
+		usbphy: phy@01c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-phy";
+			reg = <0x01c13400 0x10 0x01c14800 0x4>;
+			reg-names = "phy_ctrl", "pmu1";
+			clocks = <&usb_clk 8>;
+			clock-names = "usb_phy";
+			resets = <&usb_clk 0>, <&usb_clk 1>;
+			reset-names = "usb0_reset", "usb1_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@01c14000 {
+			compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <39>;
+			clocks = <&ahb_gates 1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@01c14400 {
+			compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <40>;
+			clocks = <&usb_clk 6>, <&ahb_gates 2>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi2: spi@01c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ahb_gates 22>, <&spi2_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		intc: interrupt-controller@01c20400 {
+			compatible = "allwinner,sun4i-a10-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@01c20800 {
+			compatible = "nextthing,gr8-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <28>;
+			clocks = <&apb0_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PB0", "PB1";
+				allwinner,function = "i2c0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PB15", "PB16";
+				allwinner,function = "i2c1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PB17", "PB18";
+				allwinner,function = "i2c2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2s0_data_pins_a: i2s0-data@0 {
+				allwinner,pins = "PB6", "PB7", "PB8", "PB9";
+				allwinner,function = "i2s0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2s0_mclk_pins_a: i2s0-mclk@0 {
+				allwinner,pins = "PB5";
+				allwinner,function = "i2s0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ir0_rx_pins_a: ir0@0 {
+				allwinner,pins = "PB4";
+				allwinner,function = "ir0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			lcd_rgb666_pins: lcd-rgb666@0 {
+				allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+						 "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+						 "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+						 "PD24", "PD25", "PD26", "PD27";
+				allwinner,function = "lcd0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0", "PF1", "PF2", "PF3",
+						 "PF4", "PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			nand_pins_a: nand-base0@0 {
+				allwinner,pins = "PC0", "PC1", "PC2",
+						"PC5", "PC8", "PC9", "PC10",
+						"PC11", "PC12", "PC13", "PC14",
+						"PC15";
+				allwinner,function = "nand0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			nand_cs0_pins_a: nand-cs@0 {
+				allwinner,pins = "PC4";
+				allwinner,function = "nand0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			nand_rb0_pins_a: nand-rb@0 {
+				allwinner,pins = "PC6";
+				allwinner,function = "nand0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			pwm0_pins_a: pwm0@0 {
+				allwinner,pins = "PB2";
+				allwinner,function = "pwm0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			pwm1_pins: pwm1 {
+				allwinner,pins = "PG13";
+				allwinner,function = "pwm1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spdif_tx_pins_a: spdif@0 {
+				allwinner,pins = "PB10";
+				allwinner,function = "spdif";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			uart1_pins_a: uart1@1 {
+				allwinner,pins = "PG3", "PG4";
+				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart1_cts_rts_pins_a: uart1-cts-rts@0 {
+				allwinner,pins = "PG5", "PG6";
+				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart2_pins_a: uart2@1 {
+				allwinner,pins = "PD2", "PD3";
+				allwinner,function = "uart2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart2_cts_rts_pins_a: uart2-cts-rts@0 {
+				allwinner,pins = "PD4", "PD5";
+				allwinner,function = "uart2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart3_pins_a: uart3@1 {
+				allwinner,pins = "PG9", "PG10";
+				allwinner,function = "uart3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart3_cts_rts_pins_a: uart3-cts-rts@0 {
+				allwinner,pins = "PG11", "PG12";
+				allwinner,function = "uart3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		pwm: pwm@01c20e00 {
+			compatible = "allwinner,sun5i-a10s-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <22>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@01c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+		};
+
+		spdif: spdif@01c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <13>;
+			clocks = <&apb0_gates 1>, <&spdif_clk>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma SUN4I_DMA_NORMAL 2>,
+			       <&dma SUN4I_DMA_NORMAL 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		ir0: ir@01c21800 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&apb0_gates 6>, <&ir0_clk>;
+			clock-names = "apb", "ir";
+			interrupts = <5>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@01c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <16>;
+			clocks = <&apb0_gates 3>, <&i2s0_clk>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 3>,
+			       <&dma SUN4I_DMA_NORMAL 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		lradc: lradc@01c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <31>;
+			status = "disabled";
+		};
+
+		codec: codec@01c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <30>;
+			clocks = <&apb0_gates 0>, <&codec_clk>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		rtp: rtp@01c25000 {
+			compatible = "allwinner,sun5i-a13-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <29>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 17>;
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 18>;
+			status = "disabled";
+		};
+
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 19>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <7>;
+			clocks = <&apb1_gates 0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <8>;
+			clocks = <&apb1_gates 1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <9>;
+			clocks = <&apb1_gates 2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		timer@01c60000 {
+			compatible = "allwinner,sun5i-a13-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <82>, <83>;
+			clocks = <&ahb_gates 28>;
+		};
+
+		fe0: display-frontend@01e00000 {
+			compatible = "allwinner,sun5i-a13-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <47>;
+			clocks = <&ahb_gates 46>, <&de_fe_clk>,
+				 <&dram_gates 25>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_fe_clk>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@01e60000 {
+			compatible = "allwinner,sun5i-a13-display-backend";
+			reg = <0x01e60000 0x10000>;
+			clocks = <&ahb_gates 44>, <&de_be_clk>,
+				 <&dram_gates 26>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_be_clk>;
+			status = "disabled";
+
+			assigned-clocks = <&de_be_clk>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/sun5i-r8-chip.dts b/src/arm/sun5i-r8-chip.dts
index f694482bdeb6..c6da5ad37152 100644
--- a/src/arm/sun5i-r8-chip.dts
+++ b/src/arm/sun5i-r8-chip.dts
@@ -56,14 +56,40 @@
 
 	aliases {
 		i2c0 = &i2c0;
+		i2c1 = &i2c1;
 		i2c2 = &i2c2;
 		serial0 = &uart1;
 		serial1 = &uart3;
+		spi0 = &spi2;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "chip:white:status";
+			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	mmc0_pwrseq: mmc0_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&chip_wifi_reg_on_pin>;
+		reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&chip_w1_pin>;
+	};
 };
 
 &be0 {
@@ -102,6 +128,12 @@
 
 #include "axp209.dtsi"
 
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "disabled";
+};
+
 &i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
@@ -121,10 +153,15 @@
 	};
 };
 
+&mmc0_pins_a {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc0_pwrseq>;
 	bus-width = <4>;
 	non-removable;
 	status = "okay";
@@ -146,12 +183,26 @@
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
+	chip_wifi_reg_on_pin: chip_wifi_reg_on_pin@0 {
+	        allwinner,pins = "PC19";
+	        allwinner,function = "gpio_out";
+	        allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+	        allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
 	chip_id_det_pin: chip_id_det_pin@0 {
 		allwinner,pins = "PG2";
 		allwinner,function = "gpio_in";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	chip_w1_pin: chip_w1_pin@0 {
+		allwinner,pins = "PD2";
+		allwinner,function = "gpio_in";
+	        allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+	        allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
 };
 
 &reg_dcdc2 {
@@ -179,6 +230,28 @@
 	regulator-always-on;
 };
 
+/*
+ * Both LDO3 and LDO4 are used in parallel to power up the WiFi/BT
+ * Chip.
+ *
+ * If those are not enabled, the SDIO part will not enumerate, and
+ * since there's no way currently to pass DT infos to an SDIO device,
+ * we cannot really do better than this ugly hack for now.
+ */
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-1";
+	regulator-always-on;
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-2";
+	regulator-always-on;
+};
+
 &reg_ldo5 {
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
@@ -192,6 +265,12 @@
 	status = "okay";
 };
 
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "disabled";
+};
+
 &tcon0 {
 	status = "okay";
 };
diff --git a/src/arm/sun5i-r8.dtsi b/src/arm/sun5i-r8.dtsi
index c04cf690b858..8b058f53b7dc 100644
--- a/src/arm/sun5i-r8.dtsi
+++ b/src/arm/sun5i-r8.dtsi
@@ -76,122 +76,12 @@
 				};
 			};
 		};
-
-		tcon0: lcd-controller@01c0c000 {
-			compatible = "allwinner,sun5i-a13-tcon";
-			reg = <0x01c0c000 0x1000>;
-			interrupts = <44>;
-			resets = <&tcon_ch0_clk 1>;
-			reset-names = "lcd";
-			clocks = <&ahb_gates 36>,
-				 <&tcon_ch0_clk>,
-				 <&tcon_ch1_clk>;
-			clock-names = "ahb",
-				      "tcon-ch0",
-				      "tcon-ch1";
-			clock-output-names = "tcon-pixel-clock";
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				tcon0_in: port@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-
-					tcon0_in_be0: endpoint@0 {
-						reg = <0>;
-						remote-endpoint = <&be0_out_tcon0>;
-					};
-				};
-
-				tcon0_out: port@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-
-					tcon0_out_tve0: endpoint@1 {
-						reg = <1>;
-						remote-endpoint = <&tve0_in_tcon0>;
-					};
-				};
-			};
-		};
-
-		fe0: display-frontend@01e00000 {
-			compatible = "allwinner,sun5i-a13-display-frontend";
-			reg = <0x01e00000 0x20000>;
-			interrupts = <47>;
-			clocks = <&ahb_gates 46>, <&de_fe_clk>,
-				 <&dram_gates 25>;
-			clock-names = "ahb", "mod",
-				      "ram";
-			resets = <&de_fe_clk>;
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				fe0_out: port@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-
-					fe0_out_be0: endpoint@0 {
-						reg = <0>;
-						remote-endpoint = <&be0_in_fe0>;
-					};
-				};
-			};
-		};
-
-		be0: display-backend@01e60000 {
-			compatible = "allwinner,sun5i-a13-display-backend";
-			reg = <0x01e60000 0x10000>;
-			clocks = <&ahb_gates 44>, <&de_be_clk>,
-				 <&dram_gates 26>;
-			clock-names = "ahb", "mod",
-				      "ram";
-			resets = <&de_be_clk>;
-			status = "disabled";
-
-			assigned-clocks = <&de_be_clk>;
-			assigned-clock-rates = <300000000>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				be0_in: port@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-
-					be0_in_fe0: endpoint@0 {
-						reg = <0>;
-						remote-endpoint = <&fe0_out_be0>;
-					};
-				};
-
-				be0_out: port@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-
-					be0_out_tcon0: endpoint@0 {
-						reg = <0>;
-						remote-endpoint = <&tcon0_in_be0>;
-					};
-				};
-			};
-		};
 	};
+};
 
-	display-engine {
-		compatible = "allwinner,sun5i-a13-display-engine";
-		allwinner,pipelines = <&fe0>;
+&tcon0_out {
+	tcon0_out_tve0: endpoint@1 {
+		reg = <1>;
+		remote-endpoint = <&tve0_in_tcon0>;
 	};
 };
diff --git a/src/arm/sun5i-reference-design-tablet.dtsi b/src/arm/sun5i-reference-design-tablet.dtsi
new file mode 100644
index 000000000000..82f87cdcd164
--- /dev/null
+++ b/src/arm/sun5i-reference-design-tablet.dtsi
@@ -0,0 +1,235 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-reference-design-tablet.dtsi"
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		serial0 = &uart1;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		/* TODO: backlight uses axp gpio1 as enable pin */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&codec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&codec_pa_pin>;
+	allwinner,pa-gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	/*
+	 * The gsl1680 is rated at 400KHz and it will not work reliable at
+	 * 100KHz, this has been confirmed on multiple different q8 tablets.
+	 * All other devices on this bus are also rated for 400KHz.
+	 */
+	clock-frequency = <400000>;
+
+	touchscreen: touchscreen {
+		interrupt-parent = <&pio>;
+		interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_power_pin>;
+		power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+		/* Tablet dts must provide reg and compatible */
+		status = "disabled";
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	codec_pa_pin: codec_pa_pin@0 {
+		allwinner,pins = "PG10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin: mmc0_cd_pin@0 {
+		allwinner,pins = "PG0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	ts_power_pin: ts_power_pin {
+		pins = "PB3";
+		function = "gpio_out";
+		drive-strength = <10>;
+		bias-disable;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PG2";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_pin_a: usb0_vbus_pin@0 {
+		allwinner,pins = "PG12";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/src/arm/sun5i.dtsi b/src/arm/sun5i.dtsi
index 0840612b5ed6..b0fca4ef4dae 100644
--- a/src/arm/sun5i.dtsi
+++ b/src/arm/sun5i.dtsi
@@ -130,7 +130,7 @@
 		};
 
 		pll3x2: pll3x2_clk {
-			compatible = "fixed-factor-clock";
+			compatible = "allwinner,sun4i-a10-pll3-2x-clk", "fixed-factor-clock";
 			#clock-cells = <0>;
 			clock-div = <1>;
 			clock-mult = <2>;
@@ -547,7 +547,8 @@
 		pio: pinctrl@01c20800 {
 			reg = <0x01c20800 0x400>;
 			interrupts = <28>;
-			clocks = <&apb0_gates 5>;
+			clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -574,6 +575,16 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			lcd_rgb565_pins: lcd_rgb565@0 {
+				allwinner,pins = "PD3", "PD4", "PD5", "PD6", "PD7",
+						 "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+						 "PD19", "PD20", "PD21", "PD22", "PD23",
+						 "PD24", "PD25", "PD26", "PD27";
+				allwinner,function = "lcd0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			mmc0_pins_a: mmc0@0 {
 				allwinner,pins = "PF0", "PF1", "PF2", "PF3",
 						 "PF4", "PF5";
@@ -591,6 +602,20 @@
 				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
+			spi2_pins_a: spi2@0 {
+				allwinner,pins = "PE1", "PE2", "PE3";
+				allwinner,function = "spi2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi2_cs0_pins_a: spi2-cs0@0 {
+				allwinner,pins = "PE0";
+				allwinner,function = "spi2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			uart3_pins_a: uart3@0 {
 				allwinner,pins = "PG9", "PG10";
 				allwinner,function = "uart3";
diff --git a/src/arm/sun6i-a31-hummingbird.dts b/src/arm/sun6i-a31-hummingbird.dts
index 9a74637f677f..7cae328398b1 100644
--- a/src/arm/sun6i-a31-hummingbird.dts
+++ b/src/arm/sun6i-a31-hummingbird.dts
@@ -63,16 +63,87 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	vga-connector {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_dac_out>;
+			};
+		};
+	};
+
+	vga-dac {
+		compatible = "dumb-vga-dac";
+		vdd-supply = <&reg_vga_3v3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				vga_dac_in: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&tcon0_out_vga>;
+				};
+			};
+
+			port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				vga_dac_out: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	reg_vga_3v3: vga_3v3_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vga-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
+	};
+
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
 	};
 };
 
+&codec {
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Speaker", "LINEOUT",
+		"LINEIN", "Line In",
+		"MIC1", "Mic",
+		"MIC2", "Headset Mic",
+		"Mic",	"MBIAS",
+		"Headset Mic", "HBIAS";
+	allwinner,pa-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc3>;
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -245,6 +316,19 @@
 	status = "okay";
 };
 
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd0_rgb888_pins>;
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_vga: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&vga_dac_in>;
+	};
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
diff --git a/src/arm/sun6i-a31-m9.dts b/src/arm/sun6i-a31-m9.dts
index 6e0e5687a09c..29016a13a2c1 100644
--- a/src/arm/sun6i-a31-m9.dts
+++ b/src/arm/sun6i-a31-m9.dts
@@ -65,12 +65,17 @@
 		pinctrl-0 = <&led_pins_m9>;
 
 		blue {
-			label = "m9:blue:usr";
+			label = "m9:blue:pwr";
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
 		};
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -84,6 +89,7 @@
 	pinctrl-0 = <&gmac_pins_mii_a>;
 	phy = <&phy1>;
 	phy-mode = "mii";
+	phy-supply = <&reg_dldo1>;
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
@@ -100,13 +106,26 @@
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
-	vmmc-supply = <&reg_vcc3v3>;
+	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
 	cd-inverted;
 	status = "okay";
 };
 
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
 &pio {
 	led_pins_m9: led_pins@0 {
 		allwinner,pins = "PH13";
@@ -130,6 +149,78 @@
 	};
 };
 
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-ethernet-phy";
+};
+
+/*
+ * Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached
+ * to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is
+ * marked as regulator-always-on.
+ */
+&reg_dldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb-hub";
+};
+
 &reg_usb1_vbus {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb1_vbus_pin_m9>;
@@ -145,5 +236,6 @@
 
 &usbphy {
 	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_aldo1>;
 	status = "okay";
 };
diff --git a/src/arm/sun6i-a31-mele-a1000g-quad.dts b/src/arm/sun6i-a31-mele-a1000g-quad.dts
index 4dd70cce2127..5faeae429e2a 100644
--- a/src/arm/sun6i-a31-mele-a1000g-quad.dts
+++ b/src/arm/sun6i-a31-mele-a1000g-quad.dts
@@ -65,12 +65,17 @@
 		pinctrl-0 = <&led_pins_m9>;
 
 		blue {
-			label = "m9:blue:usr";
+			label = "a1000g:blue:pwr";
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
 		};
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -84,6 +89,7 @@
 	pinctrl-0 = <&gmac_pins_mii_a>;
 	phy = <&phy1>;
 	phy-mode = "mii";
+	phy-supply = <&reg_dldo1>;
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
@@ -100,13 +106,26 @@
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
-	vmmc-supply = <&reg_vcc3v3>;
+	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
 	cd-inverted;
 	status = "okay";
 };
 
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
 &pio {
 	led_pins_m9: led_pins@0 {
 		allwinner,pins = "PH13";
@@ -130,6 +149,78 @@
 	};
 };
 
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-ethernet-phy";
+};
+
+/*
+ * Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached
+ * to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is
+ * marked as regulator-always-on.
+ */
+&reg_dldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb-hub";
+};
+
 &reg_usb1_vbus {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb1_vbus_pin_m9>;
@@ -150,5 +241,6 @@
 
 &usbphy {
 	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_aldo1>;
 	status = "okay";
 };
diff --git a/src/arm/sun6i-a31.dtsi b/src/arm/sun6i-a31.dtsi
index 1867af24ff52..e78faaf9243c 100644
--- a/src/arm/sun6i-a31.dtsi
+++ b/src/arm/sun6i-a31.dtsi
@@ -47,7 +47,9 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
 
+#include <dt-bindings/clock/sun6i-a31-ccu.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/reset/sun6i-a31-ccu.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -65,7 +67,10 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
-			clocks = <&pll6 0>;
+			clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_AHB1_LCD0>,
+				 <&ccu CLK_AHB1_HDMI>, <&ccu CLK_DRAM_BE0>,
+				 <&ccu CLK_IEP_DRC0>, <&ccu CLK_BE0>,
+				 <&ccu CLK_LCD0_CH1>, <&ccu CLK_HDMI>;
 			status = "disabled";
 		};
 
@@ -73,7 +78,9 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
-			clocks = <&pll6 0>;
+			clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_AHB1_LCD0>,
+				 <&ccu CLK_DRAM_BE0>, <&ccu CLK_IEP_DRC0>,
+				 <&ccu CLK_BE0>, <&ccu CLK_LCD0_CH0>;
 			status = "disabled";
 		};
 	};
@@ -97,7 +104,7 @@
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0>;
-			clocks = <&cpu>;
+			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
 			operating-points = <
 				/* kHz	  uV */
@@ -192,235 +199,6 @@
 			clock-output-names = "osc32k";
 		};
 
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6", "pll6x2";
-		};
-
-		cpu: cpu@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20050 0x4>;
-
-			/*
-			 * PLL1 is listed twice here.
-			 * While it looks suspicious, it's actually documented
-			 * that way both in the datasheet and in the code from
-			 * Allwinner.
-			 */
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-axi-clk";
-			reg = <0x01c20050 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		ahb1: ahb1@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-ahb1-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
-			clock-output-names = "ahb1";
-
-			/*
-			 * Clock AHB1 from PLL6, instead of CPU/AXI which
-			 * has rate changes due to cpufreq. Also the DMA
-			 * controller requires AHB1 clocked from PLL6.
-			 */
-			assigned-clocks = <&ahb1>;
-			assigned-clock-parents = <&pll6 0>;
-		};
-
-		ahb1_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb1>;
-			clock-indices = <1>, <5>,
-					<6>, <8>, <9>,
-					<10>, <11>, <12>,
-					<13>, <14>,
-					<17>, <18>, <19>,
-					<20>, <21>, <22>,
-					<23>, <24>, <26>,
-					<27>, <29>,
-					<30>, <31>, <32>,
-					<36>, <37>, <40>,
-					<43>, <44>, <45>,
-					<46>, <47>, <50>,
-					<52>, <55>, <56>,
-					<57>, <58>;
-			clock-output-names = "ahb1_mipidsi", "ahb1_ss",
-					"ahb1_dma", "ahb1_mmc0", "ahb1_mmc1",
-					"ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1",
-					"ahb1_nand0", "ahb1_sdram",
-					"ahb1_gmac", "ahb1_ts", "ahb1_hstimer",
-					"ahb1_spi0", "ahb1_spi1", "ahb1_spi2",
-					"ahb1_spi3", "ahb1_otg", "ahb1_ehci0",
-					"ahb1_ehci1", "ahb1_ohci0",
-					"ahb1_ohci1", "ahb1_ohci2", "ahb1_ve",
-					"ahb1_lcd0", "ahb1_lcd1", "ahb1_csi",
-					"ahb1_hdmi", "ahb1_de0", "ahb1_de1",
-					"ahb1_fe0", "ahb1_fe1", "ahb1_mp",
-					"ahb1_gpu", "ahb1_deu0", "ahb1_deu1",
-					"ahb1_drc0", "ahb1_drc1";
-		};
-
-		apb1: apb1@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb1>;
-			clock-output-names = "apb1";
-		};
-
-		apb1_gates: clk@01c20068 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-apb1-gates-clk";
-			reg = <0x01c20068 0x4>;
-			clocks = <&apb1>;
-			clock-indices = <0>, <4>,
-					<5>, <12>,
-					<13>;
-			clock-output-names = "apb1_codec", "apb1_digital_mic",
-					"apb1_pio", "apb1_daudio0",
-					"apb1_daudio1";
-		};
-
-		apb2: clk@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
-			clock-output-names = "apb2";
-		};
-
-		apb2_gates: clk@01c2006c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-apb2-gates-clk";
-			reg = <0x01c2006c 0x4>;
-			clocks = <&apb2>;
-			clock-indices = <0>, <1>,
-					<2>, <3>, <16>,
-					<17>, <18>, <19>,
-					<20>, <21>;
-			clock-output-names = "apb2_i2c0", "apb2_i2c1",
-					     "apb2_i2c2", "apb2_i2c3",
-					     "apb2_uart0", "apb2_uart1",
-					     "apb2_uart2", "apb2_uart3",
-					     "apb2_uart4", "apb2_uart5";
-		};
-
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc0",
-					     "mmc0_output",
-					     "mmc0_sample";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc1",
-					     "mmc1_output",
-					     "mmc1_sample";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc2",
-					     "mmc2_output",
-					     "mmc2_sample";
-		};
-
-		mmc3_clk: clk@01c20094 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20094 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc3",
-					     "mmc3_output",
-					     "mmc3_sample";
-		};
-
-		ss_clk: clk@01c2009c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2009c 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "ss";
-		};
-
-		spi0_clk: clk@01c200a0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a0 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "spi0";
-		};
-
-		spi1_clk: clk@01c200a4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a4 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "spi1";
-		};
-
-		spi2_clk: clk@01c200a8 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a8 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "spi2";
-		};
-
-		spi3_clk: clk@01c200ac {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200ac 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "spi3";
-		};
-
-		usb_clk: clk@01c200cc {
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-usb-clk";
-			reg = <0x01c200cc 0x4>;
-			clocks = <&osc24M>;
-			clock-indices = <8>, <9>, <10>,
-					<16>, <17>,
-					<18>;
-			clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
-					     "usb_ohci0", "usb_ohci1",
-					     "usb_ohci2";
-		};
-
 		/*
 		 * The following two are dummy clocks, placeholders
 		 * used in the gmac_tx clock. The gmac driver will
@@ -453,6 +231,12 @@
 		};
 	};
 
+	de: display-engine {
+		compatible = "allwinner,sun6i-a31-display-engine";
+		allwinner,pipelines = <&fe0>;
+		status = "disabled";
+	};
+
 	soc@01c00000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -463,23 +247,61 @@
 			compatible = "allwinner,sun6i-a31-dma";
 			reg = <0x01c02000 0x1000>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 6>;
-			resets = <&ahb1_rst 6>;
+			clocks = <&ccu CLK_AHB1_DMA>;
+			resets = <&ccu RST_AHB1_DMA>;
 			#dma-cells = <1>;
 		};
 
+		tcon0: lcd-controller@01c0c000 {
+			compatible = "allwinner,sun6i-a31-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_AHB1_LCD0>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB1_LCD0>,
+				 <&ccu CLK_LCD0_CH0>,
+				 <&ccu CLK_LCD0_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon0-pixel-clock";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
+		};
+
 		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb1_gates 8>,
-				 <&mmc0_clk 0>,
-				 <&mmc0_clk 1>,
-				 <&mmc0_clk 2>;
+			clocks = <&ccu CLK_AHB1_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb1_rst 8>;
+			resets = <&ccu RST_AHB1_MMC0>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -488,17 +310,17 @@
 		};
 
 		mmc1: mmc@01c10000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb1_gates 9>,
-				 <&mmc1_clk 0>,
-				 <&mmc1_clk 1>,
-				 <&mmc1_clk 2>;
+			clocks = <&ccu CLK_AHB1_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb1_rst 9>;
+			resets = <&ccu RST_AHB1_MMC1>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -507,17 +329,17 @@
 		};
 
 		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb1_gates 10>,
-				 <&mmc2_clk 0>,
-				 <&mmc2_clk 1>,
-				 <&mmc2_clk 2>;
+			clocks = <&ccu CLK_AHB1_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb1_rst 10>;
+			resets = <&ccu RST_AHB1_MMC2>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -526,17 +348,17 @@
 		};
 
 		mmc3: mmc@01c12000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c12000 0x1000>;
-			clocks = <&ahb1_gates 11>,
-				 <&mmc3_clk 0>,
-				 <&mmc3_clk 1>,
-				 <&mmc3_clk 2>;
+			clocks = <&ccu CLK_AHB1_MMC3>,
+				 <&ccu CLK_MMC3>,
+				 <&ccu CLK_MMC3_OUTPUT>,
+				 <&ccu CLK_MMC3_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb1_rst 11>;
+			resets = <&ccu RST_AHB1_MMC3>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -547,8 +369,8 @@
 		usb_otg: usb@01c19000 {
 			compatible = "allwinner,sun6i-a31-musb";
 			reg = <0x01c19000 0x0400>;
-			clocks = <&ahb1_gates 24>;
-			resets = <&ahb1_rst 24>;
+			clocks = <&ccu CLK_AHB1_OTG>;
+			resets = <&ccu RST_AHB1_OTG>;
 			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "mc";
 			phys = <&usbphy 0>;
@@ -565,15 +387,15 @@
 			reg-names = "phy_ctrl",
 				    "pmu1",
 				    "pmu2";
-			clocks = <&usb_clk 8>,
-				 <&usb_clk 9>,
-				 <&usb_clk 10>;
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>;
 			clock-names = "usb0_phy",
 				      "usb1_phy",
 				      "usb2_phy";
-			resets = <&usb_clk 0>,
-				 <&usb_clk 1>,
-				 <&usb_clk 2>;
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>;
 			reset-names = "usb0_reset",
 				      "usb1_reset",
 				      "usb2_reset";
@@ -585,8 +407,8 @@
 			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
 			reg = <0x01c1a000 0x100>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 26>;
-			resets = <&ahb1_rst 26>;
+			clocks = <&ccu CLK_AHB1_EHCI0>;
+			resets = <&ccu RST_AHB1_EHCI0>;
 			phys = <&usbphy 1>;
 			phy-names = "usb";
 			status = "disabled";
@@ -596,8 +418,8 @@
 			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
 			reg = <0x01c1a400 0x100>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 29>, <&usb_clk 16>;
-			resets = <&ahb1_rst 29>;
+			clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_AHB1_OHCI0>;
 			phys = <&usbphy 1>;
 			phy-names = "usb";
 			status = "disabled";
@@ -607,8 +429,8 @@
 			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
 			reg = <0x01c1b000 0x100>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 27>;
-			resets = <&ahb1_rst 27>;
+			clocks = <&ccu CLK_AHB1_EHCI1>;
+			resets = <&ccu RST_AHB1_EHCI1>;
 			phys = <&usbphy 2>;
 			phy-names = "usb";
 			status = "disabled";
@@ -618,8 +440,8 @@
 			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
 			reg = <0x01c1b400 0x100>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 30>, <&usb_clk 17>;
-			resets = <&ahb1_rst 30>;
+			clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_AHB1_OHCI1>;
 			phys = <&usbphy 2>;
 			phy-names = "usb";
 			status = "disabled";
@@ -629,11 +451,20 @@
 			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
 			reg = <0x01c1c400 0x100>;
 			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 31>, <&usb_clk 18>;
-			resets = <&ahb1_rst 31>;
+			clocks = <&ccu CLK_AHB1_OHCI2>, <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_AHB1_OHCI2>;
 			status = "disabled";
 		};
 
+		ccu: clock@01c20000 {
+			compatible = "allwinner,sun6i-a31-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		pio: pinctrl@01c20800 {
 			compatible = "allwinner,sun6i-a31-pinctrl";
 			reg = <0x01c20800 0x400>;
@@ -641,19 +472,55 @@
 				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb1_gates 5>;
+			clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
-			uart0_pins_a: uart0@0 {
-				allwinner,pins = "PH20", "PH21";
-				allwinner,function = "uart0";
+			gmac_pins_gmii_a: gmac_gmii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+						"PA4", "PA5", "PA6", "PA7",
+						"PA8", "PA9", "PA10", "PA11",
+						"PA12", "PA13", "PA14",	"PA15",
+						"PA16", "PA17", "PA18", "PA19",
+						"PA20", "PA21", "PA22", "PA23",
+						"PA24", "PA25", "PA26", "PA27";
+				allwinner,function = "gmac";
+				/*
+				 * data lines in GMII mode run at 125MHz and
+				 * might need a higher signal drive strength
+				 */
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			gmac_pins_mii_a: gmac_mii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+						"PA8", "PA9", "PA11",
+						"PA12", "PA13", "PA14", "PA19",
+						"PA20", "PA21", "PA22", "PA23",
+						"PA24", "PA26", "PA27";
+				allwinner,function = "gmac";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			gmac_pins_rgmii_a: gmac_rgmii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+						"PA9", "PA10", "PA11",
+						"PA12", "PA13", "PA14", "PA19",
+						"PA20", "PA25", "PA26", "PA27";
+				allwinner,function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			i2c0_pins_a: i2c0@0 {
 				allwinner,pins = "PH14", "PH15";
 				allwinner,function = "i2c0";
@@ -675,6 +542,19 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			lcd0_rgb888_pins: lcd0_rgb888 {
+				allwinner,pins = "PD0", "PD1", "PD2", "PD3",
+						 "PD4", "PD5", "PD6", "PD7",
+						 "PD8", "PD9", "PD10", "PD11",
+						 "PD12", "PD13", "PD14", "PD15",
+						 "PD16", "PD17", "PD18", "PD19",
+						 "PD20", "PD21", "PD22", "PD23",
+						 "PD24", "PD25", "PD26", "PD27";
+				allwinner,function = "lcd0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			mmc0_pins_a: mmc0@0 {
 				allwinner,pins = "PF0", "PF1", "PF2",
 						 "PF3", "PF4", "PF5";
@@ -719,65 +599,12 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			gmac_pins_mii_a: gmac_mii@0 {
-				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
-						"PA8", "PA9", "PA11",
-						"PA12", "PA13", "PA14", "PA19",
-						"PA20", "PA21", "PA22", "PA23",
-						"PA24", "PA26", "PA27";
-				allwinner,function = "gmac";
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PH20", "PH21";
+				allwinner,function = "uart0";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
-
-			gmac_pins_gmii_a: gmac_gmii@0 {
-				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
-						"PA4", "PA5", "PA6", "PA7",
-						"PA8", "PA9", "PA10", "PA11",
-						"PA12", "PA13", "PA14",	"PA15",
-						"PA16", "PA17", "PA18", "PA19",
-						"PA20", "PA21", "PA22", "PA23",
-						"PA24", "PA25", "PA26", "PA27";
-				allwinner,function = "gmac";
-				/*
-				 * data lines in GMII mode run at 125MHz and
-				 * might need a higher signal drive strength
-				 */
-				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			gmac_pins_rgmii_a: gmac_rgmii@0 {
-				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
-						"PA9", "PA10", "PA11",
-						"PA12", "PA13", "PA14", "PA19",
-						"PA20", "PA25", "PA26", "PA27";
-				allwinner,function = "gmac";
-				/*
-				 * data lines in RGMII mode use DDR mode
-				 * and need a higher signal drive strength
-				 */
-				allwinner,drive = <SUN4I_PINCTRL_40_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		ahb1_rst: reset@01c202c0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-ahb1-reset";
-			reg = <0x01c202c0 0xc>;
-		};
-
-		apb1_rst: reset@01c202d0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d0 0x4>;
-		};
-
-		apb2_rst: reset@01c202d8 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d8 0x4>;
 		};
 
 		timer@01c20c00 {
@@ -816,8 +643,8 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 16>;
-			resets = <&apb2_rst 16>;
+			clocks = <&ccu CLK_APB2_UART0>;
+			resets = <&ccu RST_APB2_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -829,8 +656,8 @@
 			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 17>;
-			resets = <&apb2_rst 17>;
+			clocks = <&ccu CLK_APB2_UART1>;
+			resets = <&ccu RST_APB2_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -842,8 +669,8 @@
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 18>;
-			resets = <&apb2_rst 18>;
+			clocks = <&ccu CLK_APB2_UART2>;
+			resets = <&ccu RST_APB2_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -855,8 +682,8 @@
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 19>;
-			resets = <&apb2_rst 19>;
+			clocks = <&ccu CLK_APB2_UART3>;
+			resets = <&ccu RST_APB2_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -868,8 +695,8 @@
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 20>;
-			resets = <&apb2_rst 20>;
+			clocks = <&ccu CLK_APB2_UART4>;
+			resets = <&ccu RST_APB2_UART4>;
 			dmas = <&dma 10>, <&dma 10>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -881,8 +708,8 @@
 			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 21>;
-			resets = <&apb2_rst 21>;
+			clocks = <&ccu CLK_APB2_UART5>;
+			resets = <&ccu RST_APB2_UART5>;
 			dmas = <&dma 22>, <&dma 22>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -892,8 +719,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 0>;
-			resets = <&apb2_rst 0>;
+			clocks = <&ccu CLK_APB2_I2C0>;
+			resets = <&ccu RST_APB2_I2C0>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -903,8 +730,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 1>;
-			resets = <&apb2_rst 1>;
+			clocks = <&ccu CLK_APB2_I2C1>;
+			resets = <&ccu RST_APB2_I2C1>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -914,8 +741,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 2>;
-			resets = <&apb2_rst 2>;
+			clocks = <&ccu CLK_APB2_I2C2>;
+			resets = <&ccu RST_APB2_I2C2>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -925,8 +752,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b800 0x400>;
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 3>;
-			resets = <&apb2_rst 3>;
+			clocks = <&ccu CLK_APB2_I2C3>;
+			resets = <&ccu RST_APB2_I2C3>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -937,9 +764,9 @@
 			reg = <0x01c30000 0x1054>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
-			clocks = <&ahb1_gates 17>, <&gmac_tx_clk>;
+			clocks = <&ccu CLK_AHB1_EMAC>, <&gmac_tx_clk>;
 			clock-names = "stmmaceth", "allwinner_gmac_tx";
-			resets = <&ahb1_rst 17>;
+			resets = <&ccu RST_AHB1_EMAC>;
 			reset-names = "stmmaceth";
 			snps,pbl = <2>;
 			snps,fixed-burst;
@@ -953,12 +780,25 @@
 			compatible = "allwinner,sun4i-a10-crypto";
 			reg = <0x01c15000 0x1000>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 5>, <&ss_clk>;
+			clocks = <&ccu CLK_AHB1_SS>, <&ccu CLK_SS>;
 			clock-names = "ahb", "mod";
-			resets = <&ahb1_rst 5>;
+			resets = <&ccu RST_AHB1_SS>;
 			reset-names = "ahb";
 		};
 
+		codec: codec@01c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-codec";
+			reg = <0x01c22c00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_APB1_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		timer@01c60000 {
 			compatible = "allwinner,sun6i-a31-hstimer",
 				     "allwinner,sun7i-a20-hstimer";
@@ -967,19 +807,19 @@
 				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 19>;
-			resets = <&ahb1_rst 19>;
+			clocks = <&ccu CLK_AHB1_HSTIMER>;
+			resets = <&ccu RST_AHB1_HSTIMER>;
 		};
 
 		spi0: spi@01c68000 {
 			compatible = "allwinner,sun6i-a31-spi";
 			reg = <0x01c68000 0x1000>;
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 20>, <&spi0_clk>;
+			clocks = <&ccu CLK_AHB1_SPI0>, <&ccu CLK_SPI0>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma 23>, <&dma 23>;
 			dma-names = "rx", "tx";
-			resets = <&ahb1_rst 20>;
+			resets = <&ccu RST_AHB1_SPI0>;
 			status = "disabled";
 		};
 
@@ -987,11 +827,11 @@
 			compatible = "allwinner,sun6i-a31-spi";
 			reg = <0x01c69000 0x1000>;
 			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 21>, <&spi1_clk>;
+			clocks = <&ccu CLK_AHB1_SPI1>, <&ccu CLK_SPI1>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma 24>, <&dma 24>;
 			dma-names = "rx", "tx";
-			resets = <&ahb1_rst 21>;
+			resets = <&ccu RST_AHB1_SPI1>;
 			status = "disabled";
 		};
 
@@ -999,11 +839,11 @@
 			compatible = "allwinner,sun6i-a31-spi";
 			reg = <0x01c6a000 0x1000>;
 			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 22>, <&spi2_clk>;
+			clocks = <&ccu CLK_AHB1_SPI2>, <&ccu CLK_SPI2>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma 25>, <&dma 25>;
 			dma-names = "rx", "tx";
-			resets = <&ahb1_rst 22>;
+			resets = <&ccu RST_AHB1_SPI2>;
 			status = "disabled";
 		};
 
@@ -1011,11 +851,11 @@
 			compatible = "allwinner,sun6i-a31-spi";
 			reg = <0x01c6b000 0x1000>;
 			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 23>, <&spi3_clk>;
+			clocks = <&ccu CLK_AHB1_SPI3>, <&ccu CLK_SPI3>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma 26>, <&dma 26>;
 			dma-names = "rx", "tx";
-			resets = <&ahb1_rst 23>;
+			resets = <&ccu RST_AHB1_SPI3>;
 			status = "disabled";
 		};
 
@@ -1030,6 +870,115 @@
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
+		fe0: display-frontend@01e00000 {
+			compatible = "allwinner,sun6i-a31-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_FE0>, <&ccu CLK_FE0>,
+				 <&ccu CLK_DRAM_FE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@01e60000 {
+			compatible = "allwinner,sun6i-a31-display-backend";
+			reg = <0x01e60000 0x10000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_BE0>,
+				 <&ccu CLK_DRAM_BE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_BE0>;
+
+			assigned-clocks = <&ccu CLK_BE0>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_in_be0>;
+					};
+				};
+			};
+		};
+
+		drc0: drc@01e70000 {
+			compatible = "allwinner,sun6i-a31-drc";
+			reg = <0x01e70000 0x10000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_DRC0>, <&ccu CLK_IEP_DRC0>,
+				 <&ccu CLK_DRAM_DRC0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_DRC0>;
+
+			assigned-clocks = <&ccu CLK_IEP_DRC0>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					drc0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_drc0>;
+					};
+				};
+
+				drc0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					drc0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_drc0>;
+					};
+				};
+			};
+		};
+
 		rtc: rtc@01f00000 {
 			compatible = "allwinner,sun6i-a31-rtc";
 			reg = <0x01f00000 0x54>;
@@ -1052,8 +1001,9 @@
 			ar100: ar100_clk {
 				compatible = "allwinner,sun6i-a31-ar100-clk";
 				#clock-cells = <0>;
-				clocks = <&osc32k>, <&osc24M>, <&pll6 0>,
-					 <&pll6 0>;
+				clocks = <&osc32k>, <&osc24M>,
+					 <&ccu CLK_PLL_PERIPH>,
+					 <&ccu CLK_PLL_PERIPH>;
 				clock-output-names = "ar100";
 			};
 
@@ -1116,7 +1066,8 @@
 			reg = <0x01f02c00 0x400>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			resets = <&apb0_rst 0>;
 			gpio-controller;
 			interrupt-controller;
diff --git a/src/arm/sun6i-a31s-colorfly-e708-q1.dts b/src/arm/sun6i-a31s-colorfly-e708-q1.dts
index e182eec6d878..882a4d89fa22 100644
--- a/src/arm/sun6i-a31s-colorfly-e708-q1.dts
+++ b/src/arm/sun6i-a31s-colorfly-e708-q1.dts
@@ -42,32 +42,11 @@
 
 /dts-v1/;
 #include "sun6i-a31s.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sun6i-reference-design-tablet.dtsi"
 
 / {
 	model = "Colorfly E708 Q1 tablet";
 	compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&reg_dcdc3>;
-};
-
-&ehci0 {
-	/* rtl8188etv wifi is connected here */
-	status = "okay";
 };
 
 &lradc {
@@ -82,103 +61,6 @@
 	};
 };
 
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
-	vmmc-supply = <&reg_dcdc1>;
-	bus-width = <4>;
-	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
-	cd-inverted;
-	status = "okay";
-};
-
-&pio {
-	mma8452_int_e708_q1: mma8452_int_pin@0 {
-		allwinner,pins = "PA9";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-
-	mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
-		allwinner,pins = "PA8";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-};
-
-&p2wi {
-	status = "okay";
-
-	axp22x: pmic@68 {
-		compatible = "x-powers,axp221";
-		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-#include "axp22x.dtsi"
-
-&reg_aldo3 {
-	regulator-always-on;
-	regulator-min-microvolt = <2700000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "avcc";
-};
-
-&reg_dc1sw {
-	regulator-name = "vcc-lcd";
-};
-
-&reg_dc5ldo {
-	regulator-always-on;
-	regulator-min-microvolt = <700000>;
-	regulator-max-microvolt = <1320000>;
-	regulator-name = "vdd-cpus"; /* This is an educated guess */
-};
-
-&reg_dcdc1 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-3v0";
-};
-
-&reg_dcdc2 {
-	regulator-min-microvolt = <700000>;
-	regulator-max-microvolt = <1320000>;
-	regulator-name = "vdd-gpu";
-};
-
-&reg_dcdc3 {
-	regulator-always-on;
-	regulator-min-microvolt = <700000>;
-	regulator-max-microvolt = <1320000>;
-	regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc4 {
-	regulator-always-on;
-	regulator-min-microvolt = <700000>;
-	regulator-max-microvolt = <1320000>;
-	regulator-name = "vdd-sys-dll";
-};
-
-&reg_dcdc5 {
-	regulator-always-on;
-	regulator-min-microvolt = <1500000>;
-	regulator-max-microvolt = <1500000>;
-	regulator-name = "vcc-dram";
-};
-
-&reg_dldo1 {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "vcc-wifi";
-};
-
 &reg_dldo2 {
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
@@ -186,23 +68,5 @@
 };
 
 &simplefb_lcd {
-	vcc-lcd-supply = <&reg_dc1sw>;
 	vcc-pg-supply = <&reg_dldo2>;
 };
-
-/*
- * FIXME for now we only support host mode and rely on u-boot to have
- * turned on Vbus which is controlled by the axp221 pmic on the board.
- *
- * Once we have axp221 power-supply and vbus-usb support we should switch
- * to fully supporting otg.
- */
-&usb_otg {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy {
-	usb1_vbus-supply = <&reg_dldo1>;
-	status = "okay";
-};
diff --git a/src/arm/sun6i-a31s-inet-q972.dts b/src/arm/sun6i-a31s-inet-q972.dts
new file mode 100644
index 000000000000..e584e6b186a7
--- /dev/null
+++ b/src/arm/sun6i-a31s-inet-q972.dts
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sun6i-reference-design-tablet.dtsi"
+
+/ {
+	model = "iNet Q972 tablet";
+	compatible = "inet-tek,inet-q972", "allwinner,sun6i-a31s";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */
+		touchscreen-size-x = <768>;
+		touchscreen-size-y = <1024>;
+		touchscreen-swapped-x-y;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@900 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <900000>;
+	};
+
+	button@1200 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
diff --git a/src/arm/sun6i-a31s-sina31s.dts b/src/arm/sun6i-a31s-sina31s.dts
index 6ead2f5c847a..c35ec112f5a0 100644
--- a/src/arm/sun6i-a31s-sina31s.dts
+++ b/src/arm/sun6i-a31s-sina31s.dts
@@ -65,6 +65,14 @@
 	};
 };
 
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",	"MBIAS";
+	status = "okay";
+};
+
 &ehci0 {
 	/* USB 2.0 4 port hub IC */
 	status = "okay";
diff --git a/src/arm/sun6i-a31s.dtsi b/src/arm/sun6i-a31s.dtsi
index c17a32771b98..97e2c51d0aea 100644
--- a/src/arm/sun6i-a31s.dtsi
+++ b/src/arm/sun6i-a31s.dtsi
@@ -48,6 +48,14 @@
 
 #include "sun6i-a31.dtsi"
 
+&de {
+	compatible = "allwinner,sun6i-a31s-display-engine";
+};
+
 &pio {
 	compatible = "allwinner,sun6i-a31s-pinctrl";
 };
+
+&tcon0 {
+	compatible = "allwinner,sun6i-a31s-tcon";
+};
diff --git a/src/arm/sun6i-reference-design-tablet.dtsi b/src/arm/sun6i-reference-design-tablet.dtsi
new file mode 100644
index 000000000000..0c434304e040
--- /dev/null
+++ b/src/arm/sun6i-reference-design-tablet.dtsi
@@ -0,0 +1,193 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	/* Wifi is connected here */
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
+		allwinner,pins = "PA8";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PA15";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		drivevbus-supply = <&reg_vcc5v0>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_dldo1>;
+	status = "okay";
+};
diff --git a/src/arm/sun7i-a20-bananapi-m1-plus.dts b/src/arm/sun7i-a20-bananapi-m1-plus.dts
new file mode 100644
index 000000000000..532f1a160560
--- /dev/null
+++ b/src/arm/sun7i-a20-bananapi-m1-plus.dts
@@ -0,0 +1,281 @@
+/*
+ * Copyright 2016 Luo Yi <luoyi.ly@gmail.com>
+ *
+ * Thanks to the original work by Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Banana Pi BPI-M1-Plus";
+	compatible = "sinovoip,bpi-m1-plus", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_bpi_m1p>;
+
+		green {
+			label = "bananapi-m1-plus:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		pwr {
+			label = "bananapi-m1-plus:pwr:usr";
+			gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	mmc3_pwrseq: mmc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mmc3_pwrseq_pin_bpi_m1p>;
+		reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac_power_pin_bpi_m1p>;
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m1p>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc3_pins_a {
+	/* AP6210 requires pull-up */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	gmac_power_pin_bpi_m1p: gmac_power_pin@0 {
+		allwinner,pins = "PH23";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_bpi_m1p: led_pins@0 {
+		allwinner,pins = "PH24", "PH25";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_bpi_m1p: mmc0_cd_pin@0 {
+		allwinner,pins = "PH10";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	mmc3_pwrseq_pin_bpi_m1p: mmc3_pwrseq_pin@0 {
+		allwinner,pins = "PH22";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	/* VBUS on usb host ports are tied to DC5V and therefore always on */
+	status = "okay";
+};
diff --git a/src/arm/sun7i-a20-lamobo-r1.dts b/src/arm/sun7i-a20-lamobo-r1.dts
index 5ee43d8bf174..73c05dab0a69 100644
--- a/src/arm/sun7i-a20-lamobo-r1.dts
+++ b/src/arm/sun7i-a20-lamobo-r1.dts
@@ -95,6 +95,10 @@
 	status = "okay";
 };
 
+&codec {
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };
@@ -110,13 +114,67 @@
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_pins_rgmii_a>;
-	phy = <&phy1>;
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
 
-	phy1: ethernet-phy@1 {
-		reg = <1>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch: ethernet-switch@1e {
+			compatible = "brcm,bcm53125";
+			reg = <30>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port0: port@0 {
+					reg = <0>;
+					label = "lan2";
+				};
+
+				port1: port@1 {
+					reg = <1>;
+					label = "lan3";
+				};
+
+				port2: port@2 {
+					reg = <2>;
+					label = "lan4";
+				};
+
+				port3: port@3 {
+					reg = <3>;
+					label = "wan";
+				};
+
+				port4: port@4 {
+					reg = <4>;
+					label = "lan1";
+				};
+
+				port8: port@8 {
+					reg = <8>;
+					label = "cpu";
+					ethernet = <&gmac>;
+					phy-mode = "rgmii";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
 	};
 };
 
@@ -158,10 +216,6 @@
 	status = "okay";
 };
 
-&ohci1 {
-	status = "okay";
-};
-
 &otg_sram {
 	status = "okay";
 };
@@ -199,7 +253,7 @@
 #include "axp209.dtsi"
 
 &reg_ahci_5v {
-	gpio = <&pio 1 3 0>; /* PB3 */
+	gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
 	status = "okay";
 };
 
@@ -232,11 +286,8 @@
 	status = "okay";
 };
 
-&reg_usb1_vbus {
-	status = "okay";
-};
-
 &reg_usb2_vbus {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
 	status = "okay";
 };
 
@@ -275,13 +326,16 @@
 	status = "okay";
 };
 
+&usb2_vbus_pin_a {
+	allwinner,pins = "PH12";
+};
+
 &usbphy {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>;
 	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_usb0_vbus>;
-	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
 };
diff --git a/src/arm/sun7i-a20-olimex-som-evb.dts b/src/arm/sun7i-a20-olimex-som-evb.dts
index 23aacce4d6c7..134e0c1b129d 100644
--- a/src/arm/sun7i-a20-olimex-som-evb.dts
+++ b/src/arm/sun7i-a20-olimex-som-evb.dts
@@ -88,6 +88,10 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &codec {
 	status = "okay";
 };
diff --git a/src/arm/sun7i-a20-olinuxino-lime2-emmc.dts b/src/arm/sun7i-a20-olinuxino-lime2-emmc.dts
index 5ea4915f6d75..10d307408f23 100644
--- a/src/arm/sun7i-a20-olinuxino-lime2-emmc.dts
+++ b/src/arm/sun7i-a20-olinuxino-lime2-emmc.dts
@@ -56,7 +56,7 @@
 };
 
 &pio {
-	mmc2_pins_nrst: mmc2@0 {
+	mmc2_pins_nrst: mmc2-rst-pin {
 		allwinner,pins = "PC16";
 		allwinner,function = "gpio_out";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
diff --git a/src/arm/sun7i-a20.dtsi b/src/arm/sun7i-a20.dtsi
index 2c34bbbb9570..f7db067b0de0 100644
--- a/src/arm/sun7i-a20.dtsi
+++ b/src/arm/sun7i-a20.dtsi
@@ -67,9 +67,9 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
-			clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>,
-				 <&ahb_gates 43>, <&ahb_gates 44>,
-				 <&dram_gates 26>;
+			clocks = <&ahb_gates 36>, <&ahb_gates 43>,
+				 <&ahb_gates 44>, <&de_be0_clk>,
+				 <&tcon0_ch1_clk>, <&dram_gates 26>;
 			status = "disabled";
 		};
 
@@ -77,8 +77,9 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
-			clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>,
-				 <&ahb_gates 44>, <&dram_gates 26>;
+			clocks = <&ahb_gates 36>, <&ahb_gates 44>,
+				 <&de_be0_clk>, <&tcon0_ch0_clk>,
+				 <&dram_gates 26>;
 			status = "disabled";
 		};
 
@@ -86,8 +87,9 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-tve0";
-			clocks = <&pll3>, <&pll5 1>,
-				 <&ahb_gates 34>, <&ahb_gates 36>, <&ahb_gates 44>,
+			clocks = <&ahb_gates 34>, <&ahb_gates 36>,
+				 <&ahb_gates 44>,
+				 <&de_be0_clk>, <&tcon0_ch1_clk>,
 				 <&dram_gates 5>, <&dram_gates 26>;
 			status = "disabled";
 		};
@@ -369,9 +371,9 @@
 					<5>, <6>, <7>,
 					<8>, <10>;
 			clock-output-names = "apb0_codec", "apb0_spdif",
-				"apb0_ac97", "apb0_iis0", "apb0_iis1",
+				"apb0_ac97", "apb0_i2s0", "apb0_i2s1",
 				"apb0_pio", "apb0_ir0", "apb0_ir1",
-				"apb0_iis2", "apb0_keypad";
+				"apb0_i2s2", "apb0_keypad";
 		};
 
 		apb1: clk@01c20058 {
@@ -521,6 +523,28 @@
 			clock-output-names = "ir1";
 		};
 
+		i2s0_clk: clk@01c200b8 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod1-clk";
+			reg = <0x01c200b8 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+				 <&pll2 SUN4I_A10_PLL2_4X>,
+				 <&pll2 SUN4I_A10_PLL2_2X>,
+				 <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "i2s0";
+		};
+
+		ac97_clk: clk@01c200bc {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod1-clk";
+			reg = <0x01c200bc 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+				 <&pll2 SUN4I_A10_PLL2_4X>,
+				 <&pll2 SUN4I_A10_PLL2_2X>,
+				 <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "ac97";
+		};
+
 		spdif_clk: clk@01c200c0 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun4i-a10-mod1-clk";
@@ -558,6 +582,28 @@
 			clock-output-names = "spi3";
 		};
 
+		i2s1_clk: clk@01c200d8 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod1-clk";
+			reg = <0x01c200d8 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+				 <&pll2 SUN4I_A10_PLL2_4X>,
+				 <&pll2 SUN4I_A10_PLL2_2X>,
+				 <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "i2s1";
+		};
+
+		i2s2_clk: clk@01c200dc {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod1-clk";
+			reg = <0x01c200dc 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+				 <&pll2 SUN4I_A10_PLL2_4X>,
+				 <&pll2 SUN4I_A10_PLL2_2X>,
+				 <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "i2s2";
+		};
+
 		dram_gates: clk@01c20100 {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun4i-a10-dram-gates-clk";
@@ -583,6 +629,80 @@
 					     "dram_de_mp", "dram_ace";
 		};
 
+		de_be0_clk: clk@01c20104 {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c20104 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-be0";
+		};
+
+		de_be1_clk: clk@01c20108 {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c20108 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-be1";
+		};
+
+		de_fe0_clk: clk@01c2010c {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c2010c 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-fe0";
+		};
+
+		de_fe1_clk: clk@01c20110 {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c20110 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-fe1";
+		};
+
+		tcon0_ch0_clk: clk@01c20118 {
+			#clock-cells = <0>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
+			reg = <0x01c20118 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon0-ch0-sclk";
+
+		};
+
+		tcon1_ch0_clk: clk@01c2011c {
+			#clock-cells = <0>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
+			reg = <0x01c2011c 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon1-ch0-sclk";
+
+		};
+
+		tcon0_ch1_clk: clk@01c2012c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
+			reg = <0x01c2012c 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon0-ch1-sclk";
+
+		};
+
+		tcon1_ch1_clk: clk@01c20130 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
+			reg = <0x01c20130 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon1-ch1-sclk";
+
+		};
+
 		ve_clk: clk@01c2013c {
 			#clock-cells = <0>;
 			#reset-cells = <0>;
@@ -726,6 +846,19 @@
 			#dma-cells = <2>;
 		};
 
+		nfc: nand@01c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb_gates 13>, <&nand_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 3>;
+			dma-names = "rxtx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		spi0: spi@01c05000 {
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c05000 0x1000>;
@@ -772,7 +905,7 @@
 		};
 
 		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c0f000 0x1000>;
 			clocks = <&ahb_gates 8>,
 				 <&mmc0_clk 0>,
@@ -789,7 +922,7 @@
 		};
 
 		mmc1: mmc@01c10000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c10000 0x1000>;
 			clocks = <&ahb_gates 9>,
 				 <&mmc1_clk 0>,
@@ -806,7 +939,7 @@
 		};
 
 		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c11000 0x1000>;
 			clocks = <&ahb_gates 10>,
 				 <&mmc2_clk 0>,
@@ -823,7 +956,7 @@
 		};
 
 		mmc3: mmc@01c12000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c12000 0x1000>;
 			clocks = <&ahb_gates 11>,
 				 <&mmc3_clk 0>,
@@ -952,166 +1085,184 @@
 			compatible = "allwinner,sun7i-a20-pinctrl";
 			reg = <0x01c20800 0x400>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 5>;
+			clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
-			pwm0_pins_a: pwm0@0 {
-				allwinner,pins = "PB2";
-				allwinner,function = "pwm";
+			clk_out_a_pins_a: clk_out_a@0 {
+				allwinner,pins = "PI12";
+				allwinner,function = "clk_out_a";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			pwm1_pins_a: pwm1@0 {
-				allwinner,pins = "PI3";
-				allwinner,function = "pwm";
+			clk_out_b_pins_a: clk_out_b@0 {
+				allwinner,pins = "PI13";
+				allwinner,function = "clk_out_b";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart0_pins_a: uart0@0 {
-				allwinner,pins = "PB22", "PB23";
-				allwinner,function = "uart0";
+			emac_pins_a: emac0@0 {
+				allwinner,pins = "PA0", "PA1", "PA2",
+						"PA3", "PA4", "PA5", "PA6",
+						"PA7", "PA8", "PA9", "PA10",
+						"PA11", "PA12", "PA13", "PA14",
+						"PA15", "PA16";
+				allwinner,function = "emac";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart2_pins_a: uart2@0 {
-				allwinner,pins = "PI16", "PI17", "PI18", "PI19";
-				allwinner,function = "uart2";
+			gmac_pins_mii_a: gmac_mii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2",
+						"PA3", "PA4", "PA5", "PA6",
+						"PA7", "PA8", "PA9", "PA10",
+						"PA11", "PA12", "PA13", "PA14",
+						"PA15", "PA16";
+				allwinner,function = "gmac";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart3_pins_a: uart3@0 {
-				allwinner,pins = "PG6", "PG7", "PG8", "PG9";
-				allwinner,function = "uart3";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+			gmac_pins_rgmii_a: gmac_rgmii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2",
+						"PA3", "PA4", "PA5", "PA6",
+						"PA7", "PA8", "PA10",
+						"PA11", "PA12", "PA13",
+						"PA15", "PA16";
+				allwinner,function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				allwinner,drive = <SUN4I_PINCTRL_40_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart3_pins_b: uart3@1 {
-				allwinner,pins = "PH0", "PH1";
-				allwinner,function = "uart3";
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PB0", "PB1";
+				allwinner,function = "i2c0";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart4_pins_a: uart4@0 {
-				allwinner,pins = "PG10", "PG11";
-				allwinner,function = "uart4";
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PB18", "PB19";
+				allwinner,function = "i2c1";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart4_pins_b: uart4@1 {
-				allwinner,pins = "PH4", "PH5";
-				allwinner,function = "uart4";
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PB20", "PB21";
+				allwinner,function = "i2c2";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart5_pins_a: uart5@0 {
-				allwinner,pins = "PI10", "PI11";
-				allwinner,function = "uart5";
+			i2c3_pins_a: i2c3@0 {
+				allwinner,pins = "PI0", "PI1";
+				allwinner,function = "i2c3";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart6_pins_a: uart6@0 {
-				allwinner,pins = "PI12", "PI13";
-				allwinner,function = "uart6";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			ir0_rx_pins_a: ir0@0 {
+				    allwinner,pins = "PB4";
+				    allwinner,function = "ir0";
+				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart7_pins_a: uart7@0 {
-				allwinner,pins = "PI20", "PI21";
-				allwinner,function = "uart7";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			ir0_tx_pins_a: ir0@1 {
+				    allwinner,pins = "PB3";
+				    allwinner,function = "ir0";
+				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			i2c0_pins_a: i2c0@0 {
-				allwinner,pins = "PB0", "PB1";
-				allwinner,function = "i2c0";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			ir1_rx_pins_a: ir1@0 {
+				    allwinner,pins = "PB23";
+				    allwinner,function = "ir1";
+				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			i2c1_pins_a: i2c1@0 {
-				allwinner,pins = "PB18", "PB19";
-				allwinner,function = "i2c1";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			ir1_tx_pins_a: ir1@1 {
+				    allwinner,pins = "PB22";
+				    allwinner,function = "ir1";
+				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			i2c2_pins_a: i2c2@0 {
-				allwinner,pins = "PB20", "PB21";
-				allwinner,function = "i2c2";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0", "PF1", "PF2",
+						 "PF3", "PF4", "PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			i2c3_pins_a: i2c3@0 {
-				allwinner,pins = "PI0", "PI1";
-				allwinner,function = "i2c3";
+			mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
+				allwinner,pins = "PH1";
+				allwinner,function = "gpio_in";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			mmc2_pins_a: mmc2@0 {
+				allwinner,pins = "PC6", "PC7", "PC8",
+						 "PC9", "PC10", "PC11";
+				allwinner,function = "mmc2";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			mmc3_pins_a: mmc3@0 {
+				allwinner,pins = "PI4", "PI5", "PI6",
+						 "PI7", "PI8", "PI9";
+				allwinner,function = "mmc3";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			emac_pins_a: emac0@0 {
-				allwinner,pins = "PA0", "PA1", "PA2",
-						"PA3", "PA4", "PA5", "PA6",
-						"PA7", "PA8", "PA9", "PA10",
-						"PA11", "PA12", "PA13", "PA14",
-						"PA15", "PA16";
-				allwinner,function = "emac";
+			ps20_pins_a: ps20@0 {
+				allwinner,pins = "PI20", "PI21";
+				allwinner,function = "ps2";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			clk_out_a_pins_a: clk_out_a@0 {
-				allwinner,pins = "PI12";
-				allwinner,function = "clk_out_a";
+			ps21_pins_a: ps21@0 {
+				allwinner,pins = "PH12", "PH13";
+				allwinner,function = "ps2";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			clk_out_b_pins_a: clk_out_b@0 {
-				allwinner,pins = "PI13";
-				allwinner,function = "clk_out_b";
+			pwm0_pins_a: pwm0@0 {
+				allwinner,pins = "PB2";
+				allwinner,function = "pwm";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			gmac_pins_mii_a: gmac_mii@0 {
-				allwinner,pins = "PA0", "PA1", "PA2",
-						"PA3", "PA4", "PA5", "PA6",
-						"PA7", "PA8", "PA9", "PA10",
-						"PA11", "PA12", "PA13", "PA14",
-						"PA15", "PA16";
-				allwinner,function = "gmac";
+			pwm1_pins_a: pwm1@0 {
+				allwinner,pins = "PI3";
+				allwinner,function = "pwm";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			gmac_pins_rgmii_a: gmac_rgmii@0 {
-				allwinner,pins = "PA0", "PA1", "PA2",
-						"PA3", "PA4", "PA5", "PA6",
-						"PA7", "PA8", "PA10",
-						"PA11", "PA12", "PA13",
-						"PA15", "PA16";
-				allwinner,function = "gmac";
-				/*
-				 * data lines in RGMII mode use DDR mode
-				 * and need a higher signal drive strength
-				 */
-				allwinner,drive = <SUN4I_PINCTRL_40_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			spdif_tx_pins_a: spdif@0 {
+				allwinner,pins = "PB13";
+				allwinner,function = "spdif";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
 			spi0_pins_a: spi0@0 {
@@ -1177,84 +1328,67 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0", "PF1", "PF2",
-						 "PF3", "PF4", "PF5";
-				allwinner,function = "mmc0";
-				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PB22", "PB23";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
-				allwinner,pins = "PH1";
-				allwinner,function = "gpio_in";
+			uart2_pins_a: uart2@0 {
+				allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+				allwinner,function = "uart2";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			mmc2_pins_a: mmc2@0 {
-				allwinner,pins = "PC6", "PC7", "PC8",
-						 "PC9", "PC10", "PC11";
-				allwinner,function = "mmc2";
-				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			mmc3_pins_a: mmc3@0 {
-				allwinner,pins = "PI4", "PI5", "PI6",
-						 "PI7", "PI8", "PI9";
-				allwinner,function = "mmc3";
-				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ir0_rx_pins_a: ir0@0 {
-				    allwinner,pins = "PB4";
-				    allwinner,function = "ir0";
-				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			uart3_pins_a: uart3@0 {
+				allwinner,pins = "PG6", "PG7", "PG8", "PG9";
+				allwinner,function = "uart3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ir0_tx_pins_a: ir0@1 {
-				    allwinner,pins = "PB3";
-				    allwinner,function = "ir0";
-				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			uart3_pins_b: uart3@1 {
+				allwinner,pins = "PH0", "PH1";
+				allwinner,function = "uart3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ir1_rx_pins_a: ir1@0 {
-				    allwinner,pins = "PB23";
-				    allwinner,function = "ir1";
-				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			uart4_pins_a: uart4@0 {
+				allwinner,pins = "PG10", "PG11";
+				allwinner,function = "uart4";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ir1_tx_pins_a: ir1@1 {
-				    allwinner,pins = "PB22";
-				    allwinner,function = "ir1";
-				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			uart4_pins_b: uart4@1 {
+				allwinner,pins = "PH4", "PH5";
+				allwinner,function = "uart4";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ps20_pins_a: ps20@0 {
-				allwinner,pins = "PI20", "PI21";
-				allwinner,function = "ps2";
+			uart5_pins_a: uart5@0 {
+				allwinner,pins = "PI10", "PI11";
+				allwinner,function = "uart5";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ps21_pins_a: ps21@0 {
-				allwinner,pins = "PH12", "PH13";
-				allwinner,function = "ps2";
+			uart6_pins_a: uart6@0 {
+				allwinner,pins = "PI12", "PI13";
+				allwinner,function = "uart6";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			spdif_tx_pins_a: spdif@0 {
-				allwinner,pins = "PB13";
-				allwinner,function = "spdif";
+			uart7_pins_a: uart7@0 {
+				allwinner,pins = "PI20", "PI21";
+				allwinner,function = "uart7";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -1320,6 +1454,32 @@
 			status = "disabled";
 		};
 
+		i2s1: i2s@01c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 4>, <&i2s1_clk>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 4>,
+			       <&dma SUN4I_DMA_NORMAL 4>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s0: i2s@01c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 3>, <&i2s0_clk>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 3>,
+			       <&dma SUN4I_DMA_NORMAL 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		lradc: lradc@01c22800 {
 			compatible = "allwinner,sun4i-a10-lradc-keys";
 			reg = <0x01c22800 0x100>;
@@ -1345,6 +1505,19 @@
 			reg = <0x01c23800 0x200>;
 		};
 
+		i2s2: i2s@01c24400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c24400 0x400>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 8>, <&i2s2_clk>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 6>,
+			       <&dma SUN4I_DMA_NORMAL 6>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		rtp: rtp@01c25000 {
 			compatible = "allwinner,sun5i-a13-ts";
 			reg = <0x01c25000 0x100>;
diff --git a/src/arm/sun8i-a23-a33.dtsi b/src/arm/sun8i-a23-a33.dtsi
index 7e05e09e61c7..e4991a78ad73 100644
--- a/src/arm/sun8i-a23-a33.dtsi
+++ b/src/arm/sun8i-a23-a33.dtsi
@@ -46,7 +46,9 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
+#include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -60,7 +62,9 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
-			clocks = <&pll6 0>;
+			clocks = <&ccu CLK_BUS_LCD>, <&ccu CLK_BUS_DE_BE>,
+				 <&ccu CLK_LCD_CH0>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_DRC>;
 			status = "disabled";
 		};
 	};
@@ -111,143 +115,6 @@
 			clock-frequency = <32768>;
 			clock-output-names = "osc32k";
 		};
-
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		/* dummy clock until actually implemented */
-		pll5: pll5_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-			clock-output-names = "pll5";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6", "pll6x2";
-		};
-
-		cpu: cpu_clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20050 0x4>;
-
-			/*
-			 * PLL1 is listed twice here.
-			 * While it looks suspicious, it's actually documented
-			 * that way both in the datasheet and in the code from
-			 * Allwinner.
-			 */
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi_clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-axi-clk";
-			reg = <0x01c20050 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		ahb1: ahb1_clk@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-ahb1-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
-			clock-output-names = "ahb1";
-		};
-
-		apb1: apb1_clk@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb1>;
-			clock-output-names = "apb1";
-		};
-
-		apb1_gates: clk@01c20068 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a23-apb1-gates-clk";
-			reg = <0x01c20068 0x4>;
-			clocks = <&apb1>;
-			clock-indices = <0>, <5>,
-					<12>, <13>;
-			clock-output-names = "apb1_codec", "apb1_pio",
-					"apb1_daudio0",	"apb1_daudio1";
-		};
-
-		apb2: clk@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
-			clock-output-names = "apb2";
-		};
-
-		apb2_gates: clk@01c2006c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a23-apb2-gates-clk";
-			reg = <0x01c2006c 0x4>;
-			clocks = <&apb2>;
-			clock-indices = <0>, <1>,
-					<2>, <16>,
-					<17>, <18>,
-					<19>, <20>;
-			clock-output-names = "apb2_i2c0", "apb2_i2c1",
-					"apb2_i2c2", "apb2_uart0",
-					"apb2_uart1", "apb2_uart2",
-					"apb2_uart3", "apb2_uart4";
-		};
-
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc0",
-					     "mmc0_output",
-					     "mmc0_sample";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc1",
-					     "mmc1_output",
-					     "mmc1_sample";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc2",
-					     "mmc2_output",
-					     "mmc2_sample";
-		};
-
-		usb_clk: clk@01c200cc {
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			compatible = "allwinner,sun8i-a23-usb-clk";
-			reg = <0x01c200cc 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "usb_phy0", "usb_phy1", "usb_hsic",
-					     "usb_hsic_12M", "usb_ohci0";
-		};
 	};
 
 	soc@01c00000 {
@@ -260,23 +127,23 @@
 			compatible = "allwinner,sun8i-a23-dma";
 			reg = <0x01c02000 0x1000>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 6>;
-			resets = <&ahb1_rst 6>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
 			#dma-cells = <1>;
 		};
 
 		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb1_gates 8>,
-				 <&mmc0_clk 0>,
-				 <&mmc0_clk 1>,
-				 <&mmc0_clk 2>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb1_rst 8>;
+			resets = <&ccu RST_BUS_MMC0>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -285,17 +152,17 @@
 		};
 
 		mmc1: mmc@01c10000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb1_gates 9>,
-				 <&mmc1_clk 0>,
-				 <&mmc1_clk 1>,
-				 <&mmc1_clk 2>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb1_rst 9>;
+			resets = <&ccu RST_BUS_MMC1>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -304,17 +171,17 @@
 		};
 
 		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb1_gates 10>,
-				 <&mmc2_clk 0>,
-				 <&mmc2_clk 1>,
-				 <&mmc2_clk 2>;
+			clocks = <&ccu CLK_BUS_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb1_rst 10>;
+			resets = <&ccu RST_BUS_MMC2>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -322,12 +189,55 @@
 			#size-cells = <0>;
 		};
 
+		nfc: nand@01c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_NAND>;
+			reset-names = "ahb";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@01c19000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@01c19400 {
+			/*
+			 * compatible and address regions get set in
+			 * SoC specific dtsi file
+			 */
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
 		ehci0: usb@01c1a000 {
 			compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
 			reg = <0x01c1a000 0x100>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 26>;
-			resets = <&ahb1_rst 26>;
+			clocks = <&ccu CLK_BUS_EHCI>;
+			resets = <&ccu RST_BUS_EHCI>;
 			phys = <&usbphy 1>;
 			phy-names = "usb";
 			status = "disabled";
@@ -337,18 +247,27 @@
 			compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
 			reg = <0x01c1a400 0x100>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 29>, <&usb_clk 16>;
-			resets = <&ahb1_rst 29>;
+			clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>;
+			resets = <&ccu RST_BUS_OHCI>;
 			phys = <&usbphy 1>;
 			phy-names = "usb";
 			status = "disabled";
 		};
 
+		ccu: clock@01c20000 {
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		pio: pinctrl@01c20800 {
 			/* compatible gets set in SoC specific dtsi file */
 			reg = <0x01c20800 0x400>;
 			/* interrupts get set in SoC specific dtsi file */
-			clocks = <&apb1_gates 5>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -361,6 +280,20 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			uart1_pins_a: uart1@0 {
+				allwinner,pins = "PG6", "PG7";
+				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart1_pins_cts_rts_a: uart1-cts-rts@0 {
+				allwinner,pins = "PG8", "PG9";
+				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			mmc0_pins_a: mmc0@0 {
 				allwinner,pins = "PF0", "PF1", "PF2",
 						 "PF3", "PF4", "PF5";
@@ -414,24 +347,16 @@
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
-		};
 
-		ahb1_rst: reset@01c202c0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202c0 0xc>;
-		};
-
-		apb1_rst: reset@01c202d0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d0 0x4>;
-		};
-
-		apb2_rst: reset@01c202d8 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d8 0x4>;
+			lcd_rgb666_pins: lcd-rgb666@0 {
+				allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+						 "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+			                         "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+			                         "PD24", "PD25", "PD26", "PD27";
+				allwinner,function = "lcd0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
 		};
 
 		timer@01c20c00 {
@@ -469,8 +394,8 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 16>;
-			resets = <&apb2_rst 16>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -482,8 +407,8 @@
 			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 17>;
-			resets = <&apb2_rst 17>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -495,8 +420,8 @@
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 18>;
-			resets = <&apb2_rst 18>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -508,8 +433,8 @@
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 19>;
-			resets = <&apb2_rst 19>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -521,8 +446,8 @@
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 20>;
-			resets = <&apb2_rst 20>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
 			dmas = <&dma 10>, <&dma 10>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -532,8 +457,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 0>;
-			resets = <&apb2_rst 0>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -543,8 +468,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 1>;
-			resets = <&apb2_rst 1>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -554,8 +479,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 2>;
-			resets = <&apb2_rst 2>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -651,7 +576,8 @@
 			compatible = "allwinner,sun8i-a23-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			resets = <&apb0_rst 0>;
 			gpio-controller;
 			interrupt-controller;
diff --git a/src/arm/sun8i-a23-gt90h-v4.dts b/src/arm/sun8i-a23-gt90h-v4.dts
index b2ce284a65a2..e3c7a25ca37d 100644
--- a/src/arm/sun8i-a23-gt90h-v4.dts
+++ b/src/arm/sun8i-a23-gt90h-v4.dts
@@ -42,70 +42,27 @@
 
 /dts-v1/;
 #include "sun8i-a23.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-#include <dt-bindings/pwm/pwm.h>
+#include "sun8i-reference-design-tablet.dtsi"
 
 / {
 	model = "Allwinner GT90H Dual Core Tablet (v4)";
 	compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a23";
-
-	aliases {
-		serial0 = &r_uart;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&bl_en_pin_gt90h>;
-		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-		default-brightness-level = <8>;
-		enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
 };
 
 &ehci0 {
 	status = "okay";
 };
 
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl3675";
+	firmware-name = "gsl3675-gt90h.fw";
+	touchscreen-size-x = <1792>;
+	touchscreen-size-y = <1024>;
 	status = "okay";
 };
 
 &lradc {
-	vref-supply = <&reg_vcc3v0>;
-	status = "okay";
-
-	button@200 {
-		label = "Volume Up";
-		linux,code = <KEY_VOLUMEUP>;
-		channel = <0>;
-		voltage = <200000>;
-	};
-
-	button@400 {
-		label = "Volume Down";
-		linux,code = <KEY_VOLUMEDOWN>;
-		channel = <0>;
-		voltage = <400000>;
-	};
-
 	button@600 {
 		label = "Back";
 		linux,code = <KEY_BACK>;
@@ -114,144 +71,6 @@
 	};
 };
 
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gt90h>;
-	vmmc-supply = <&reg_aldo1>;
-	bus-width = <4>;
-	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-	cd-inverted;
-	status = "okay";
-};
-
-&pio {
-	bl_en_pin_gt90h: bl_en_pin@0 {
-		allwinner,pins = "PH6";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-
-	mmc0_cd_pin_gt90h: mmc0_cd_pin@0 {
-		allwinner,pins = "PB4";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins>;
-	status = "okay";
-};
-
-&r_rsb {
-	status = "okay";
-
-	axp22x: pmic@3a3 {
-		compatible = "x-powers,axp223";
-		reg = <0x3a3>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		eldoin-supply = <&reg_dcdc1>;
-	};
-};
-
-&r_uart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&r_uart_pins_a>;
-	status = "okay";
-};
-
-#include "axp22x.dtsi"
-
-&reg_aldo1 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-io";
-};
-
-&reg_aldo2 {
-	regulator-always-on;
-	regulator-min-microvolt = <2350000>;
-	regulator-max-microvolt = <2650000>;
-	regulator-name = "vdd-dll";
-};
-
-&reg_aldo3 {
-	regulator-always-on;
-	regulator-min-microvolt = <2700000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "vcc-pll-avcc";
-};
-
-&reg_dc1sw {
-	regulator-name = "vcc-lcd";
-};
-
-&reg_dc5ldo {
-	regulator-always-on;
-	regulator-min-microvolt = <900000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-cpus";
-};
-
-&reg_dcdc1 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-3v0";
-};
-
-&reg_dcdc2 {
-	regulator-always-on;
-	regulator-min-microvolt = <900000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-sys";
-};
-
-&reg_dcdc3 {
-	regulator-always-on;
-	regulator-min-microvolt = <900000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc5 {
-	regulator-always-on;
-	regulator-min-microvolt = <1500000>;
-	regulator-max-microvolt = <1500000>;
-	regulator-name = "vcc-dram";
-};
-
-&reg_dldo1 {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "vcc-wifi";
-};
-
-&reg_rtc_ldo {
-	regulator-name = "vcc-rtc";
-};
-
-&simplefb_lcd {
-	vcc-lcd-supply = <&reg_dc1sw>;
-};
-
-/*
- * FIXME for now we only support host mode and rely on u-boot to have
- * turned on Vbus which is controlled by the axp223 pmic on the board.
- *
- * Once we have axp223 support we should switch to fully supporting otg.
- */
-&usb_otg {
-	dr_mode = "host";
-	status = "okay";
-};
-
 &usbphy {
 	usb1_vbus-supply = <&reg_dldo1>;
-	status = "okay";
 };
diff --git a/src/arm/sun8i-a23-inet86dz.dts b/src/arm/sun8i-a23-inet86dz.dts
new file mode 100644
index 000000000000..d4405752a414
--- /dev/null
+++ b/src/arm/sun8i-a23-inet86dz.dts
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "INet-86DZ Rev 01";
+	compatible = "primux,inet86dz", "allwinner,sun8i-a23";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl1680";
+	firmware-name = "gsl1680-inet86dz.fw";
+	touchscreen-size-x = <960>;
+	touchscreen-size-y = <640>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+};
diff --git a/src/arm/sun8i-a23-ippo-q8h-v1.2.dts b/src/arm/sun8i-a23-ippo-q8h-v1.2.dts
index 6062ea7a9903..956320a6cc78 100644
--- a/src/arm/sun8i-a23-ippo-q8h-v1.2.dts
+++ b/src/arm/sun8i-a23-ippo-q8h-v1.2.dts
@@ -48,18 +48,3 @@
 	model = "Q8 A23 Tablet";
 	compatible = "allwinner,q8-a23", "allwinner,sun8i-a23";
 };
-
-/*
- * FIXME for now we only support host mode and rely on u-boot to have
- * turned on Vbus which is controlled by the axp223 pmic on the board.
- *
- * Once we have axp223 support we should switch to fully supporting otg.
- */
-&usb_otg {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
diff --git a/src/arm/sun8i-a23-ippo-q8h-v5.dts b/src/arm/sun8i-a23-ippo-q8h-v5.dts
index 6062ea7a9903..956320a6cc78 100644
--- a/src/arm/sun8i-a23-ippo-q8h-v5.dts
+++ b/src/arm/sun8i-a23-ippo-q8h-v5.dts
@@ -48,18 +48,3 @@
 	model = "Q8 A23 Tablet";
 	compatible = "allwinner,q8-a23", "allwinner,sun8i-a23";
 };
-
-/*
- * FIXME for now we only support host mode and rely on u-boot to have
- * turned on Vbus which is controlled by the axp223 pmic on the board.
- *
- * Once we have axp223 support we should switch to fully supporting otg.
- */
-&usb_otg {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
diff --git a/src/arm/sun8i-a23-polaroid-mid2407pxe03.dts b/src/arm/sun8i-a23-polaroid-mid2407pxe03.dts
new file mode 100644
index 000000000000..21bb291b9568
--- /dev/null
+++ b/src/arm/sun8i-a23-polaroid-mid2407pxe03.dts
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Polaroid MID2407PXE03 tablet";
+	compatible = "polaroid,mid2407pxe03", "allwinner,sun8i-a23";
+
+	aliases {
+		ethernet0 = &esp8089;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwrseq_pin_mid2407>;
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
+		/* The esp8089 needs 200 ms after driving wifi-en high */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&i2c1 {
+	mma7660: accelerometer@4c {
+		reg = <0x4c>;
+		compatible = "fsl,mma7660";
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	esp8089: sdio_wifi@1 {
+		compatible = "esp,esp8089";
+		reg = <1>;
+		esp,crystal-26M-en = <2>;
+	};
+};
+
+&mmc1_pins_a {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&r_pio {
+	wifi_pwrseq_pin_mid2407: wifi_pwrseq_pin@0 {
+		allwinner,pins = "PL6";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl1680";
+	firmware-name = "gsl1680-polaroid-mid2407pxe03.fw";
+	touchscreen-size-x = <960>;
+	touchscreen-size-y = <640>;
+	touchscreen-inverted-x;
+	touchscreen-inverted-y;
+	vddio-supply = <&reg_ldo_io1>;
+	status = "okay";
+};
diff --git a/src/arm/sun8i-a23-polaroid-mid2809pxe04.dts b/src/arm/sun8i-a23-polaroid-mid2809pxe04.dts
index cb5daafcb7c2..9955f85f9147 100644
--- a/src/arm/sun8i-a23-polaroid-mid2809pxe04.dts
+++ b/src/arm/sun8i-a23-polaroid-mid2809pxe04.dts
@@ -42,202 +42,60 @@
 
 /dts-v1/;
 #include "sun8i-a23.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-#include <dt-bindings/pwm/pwm.h>
+#include "sun8i-reference-design-tablet.dtsi"
 
 / {
 	model = "Polaroid MID2809PXE04 tablet";
 	compatible = "polaroid,mid2809pxe04", "allwinner,sun8i-a23";
 
 	aliases {
-		serial0 = &r_uart;
+		ethernet0 = &esp8089;
 	};
 
-	backlight: backlight {
-		compatible = "pwm-backlight";
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
-		pinctrl-0 = <&bl_en_pin_mid2809>;
-		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-		default-brightness-level = <8>;
-		enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
+		pinctrl-0 = <&wifi_pwrseq_pin_mid2809>;
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
+		/* The esp8089 needs 200 ms after driving wifi-en high */
+		post-power-on-delay-ms = <200>;
 	};
 };
 
-&ehci0 {
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-};
-
-&i2c1 {
+&mmc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
-	status = "okay";
-};
-
-&lradc {
-	vref-supply = <&reg_vcc3v0>;
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
 	status = "okay";
 
-	button@200 {
-		label = "Volume Up";
-		linux,code = <KEY_VOLUMEUP>;
-		channel = <0>;
-		voltage = <200000>;
-	};
-
-	button@400 {
-		label = "Volume Down";
-		linux,code = <KEY_VOLUMEDOWN>;
-		channel = <0>;
-		voltage = <400000>;
+	esp8089: sdio_wifi@1 {
+		compatible = "esp,esp8089";
+		reg = <1>;
+		esp,crystal-26M-en = <2>;
 	};
 };
 
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mid2809>;
-	vmmc-supply = <&reg_dcdc1>;
-	bus-width = <4>;
-	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-	cd-inverted;
-	status = "okay";
+&mmc1_pins_a {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 };
 
-&pio {
-	bl_en_pin_mid2809: bl_en_pin@0 {
-		allwinner,pins = "PH6";
-		allwinner,function = "gpio_in";
+&r_pio {
+	wifi_pwrseq_pin_mid2809: wifi_pwrseq_pin@0 {
+		allwinner,pins = "PL6";
+		allwinner,function = "gpio_out";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
-
-	mmc0_cd_pin_mid2809: mmc0_cd_pin@0 {
-		allwinner,pins = "PB4";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins>;
-	status = "okay";
-};
-
-&r_rsb {
-	status = "okay";
-
-	axp22x: pmic@3a3 {
-		compatible = "x-powers,axp223";
-		reg = <0x3a3>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		eldoin-supply = <&reg_dcdc1>;
-	};
-};
-
-&r_uart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&r_uart_pins_a>;
-	status = "okay";
-};
-
-#include "axp22x.dtsi"
-
-&reg_aldo1 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-io";
-};
-
-&reg_aldo2 {
-	regulator-always-on;
-	regulator-min-microvolt = <2350000>;
-	regulator-max-microvolt = <2650000>;
-	regulator-name = "vdd-dll";
-};
-
-&reg_aldo3 {
-	regulator-always-on;
-	regulator-min-microvolt = <2700000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "vcc-pll-avcc";
-};
-
-&reg_dc1sw {
-	regulator-name = "vcc-lcd";
-};
-
-&reg_dc5ldo {
-	regulator-always-on;
-	regulator-min-microvolt = <900000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-cpus";
-};
-
-&reg_dcdc1 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-3v0";
-};
-
-&reg_dcdc2 {
-	regulator-always-on;
-	regulator-min-microvolt = <900000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-sys";
-};
-
-&reg_dcdc3 {
-	regulator-always-on;
-	regulator-min-microvolt = <900000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc5 {
-	regulator-always-on;
-	regulator-min-microvolt = <1500000>;
-	regulator-max-microvolt = <1500000>;
-	regulator-name = "vcc-dram";
-};
-
-&reg_rtc_ldo {
-	regulator-name = "vcc-rtc";
-};
-
-&simplefb_lcd {
-	vcc-lcd-supply = <&reg_dc1sw>;
-};
-
-/*
- * FIXME for now we only support host mode and rely on u-boot to have
- * turned on Vbus which is controlled by the axp223 pmic on the board.
- *
- * Once we have axp223 support we should switch to fully supporting otg.
- */
-&usb_otg {
-	dr_mode = "host";
-	status = "okay";
 };
 
-&usbphy {
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl3670";
+	firmware-name = "gsl3670-polaroid-mid2809pxe04.fw";
+	touchscreen-size-x = <1660>;
+	touchscreen-size-y = <890>;
 	status = "okay";
 };
diff --git a/src/arm/sun8i-a23-q8-tablet.dts b/src/arm/sun8i-a23-q8-tablet.dts
index 6062ea7a9903..956320a6cc78 100644
--- a/src/arm/sun8i-a23-q8-tablet.dts
+++ b/src/arm/sun8i-a23-q8-tablet.dts
@@ -48,18 +48,3 @@
 	model = "Q8 A23 Tablet";
 	compatible = "allwinner,q8-a23", "allwinner,sun8i-a23";
 };
-
-/*
- * FIXME for now we only support host mode and rely on u-boot to have
- * turned on Vbus which is controlled by the axp223 pmic on the board.
- *
- * Once we have axp223 support we should switch to fully supporting otg.
- */
-&usb_otg {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
diff --git a/src/arm/sun8i-a23.dtsi b/src/arm/sun8i-a23.dtsi
index 92e6616979ea..54d045dab825 100644
--- a/src/arm/sun8i-a23.dtsi
+++ b/src/arm/sun8i-a23.dtsi
@@ -48,74 +48,10 @@
 	memory {
 		reg = <0x40000000 0x40000000>;
 	};
+};
 
-	clocks {
-		ahb1_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb1>;
-			clock-indices = <1>, <6>,
-					<8>, <9>, <10>,
-					<13>, <14>,
-					<19>, <20>,
-					<21>, <24>, <26>,
-					<29>, <32>, <36>,
-					<40>, <44>, <46>,
-					<52>, <53>,
-					<54>, <57>;
-			clock-output-names = "ahb1_mipidsi", "ahb1_dma",
-					"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
-					"ahb1_nand", "ahb1_sdram",
-					"ahb1_hstimer", "ahb1_spi0",
-					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
-					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
-					"ahb1_csi", "ahb1_be",	"ahb1_fe",
-					"ahb1_gpu", "ahb1_msgbox",
-					"ahb1_spinlock", "ahb1_drc";
-		};
-
-		mbus_clk: clk@01c2015c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-mbus-clk";
-			reg = <0x01c2015c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5>;
-			clock-output-names = "mbus";
-		};
-	};
-
-	soc@01c00000 {
-		usb_otg: usb@01c19000 {
-			compatible = "allwinner,sun6i-a31-musb";
-			reg = <0x01c19000 0x0400>;
-			clocks = <&ahb1_gates 24>;
-			resets = <&ahb1_rst 24>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "mc";
-			phys = <&usbphy 0>;
-			phy-names = "usb";
-			extcon = <&usbphy 0>;
-			status = "disabled";
-		};
-
-		usbphy: phy@01c19400 {
-			compatible = "allwinner,sun8i-a23-usb-phy";
-			reg = <0x01c19400 0x10>,
-			      <0x01c1a800 0x4>;
-			reg-names = "phy_ctrl",
-				    "pmu1";
-			clocks = <&usb_clk 8>,
-				 <&usb_clk 9>;
-			clock-names = "usb0_phy",
-				      "usb1_phy";
-			resets = <&usb_clk 0>,
-				 <&usb_clk 1>;
-			reset-names = "usb0_reset",
-				      "usb1_reset";
-			status = "disabled";
-			#phy-cells = <1>;
-		};
-	};
+&ccu {
+	compatible = "allwinner,sun8i-a23-ccu";
 };
 
 &pio {
@@ -124,3 +60,13 @@
 		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 };
+
+&usb_otg {
+	compatible = "allwinner,sun6i-a31-musb";
+};
+
+&usbphy {
+	compatible = "allwinner,sun8i-a23-usb-phy";
+	reg = <0x01c19400 0x10>, <0x01c1a800 0x4>;
+	reg-names = "phy_ctrl", "pmu1";
+};
diff --git a/src/arm/sun8i-a33-et-q8-v1.6.dts b/src/arm/sun8i-a33-et-q8-v1.6.dts
index 44b32296a025..b0bc2360f8c4 100644
--- a/src/arm/sun8i-a33-et-q8-v1.6.dts
+++ b/src/arm/sun8i-a33-et-q8-v1.6.dts
@@ -48,18 +48,3 @@
 	model = "Q8 A33 Tablet";
 	compatible = "allwinner,q8-a33", "allwinner,sun8i-a33";
 };
-
-/*
- * FIXME for now we only support host mode and rely on u-boot to have
- * turned on Vbus which is controlled by the axp223 pmic on the board.
- *
- * Once we have axp223 support we should switch to fully supporting otg.
- */
-&usb_otg {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
diff --git a/src/arm/sun8i-a33-ga10h-v1.1.dts b/src/arm/sun8i-a33-ga10h-v1.1.dts
index 1aefc6793e25..f71159987cac 100644
--- a/src/arm/sun8i-a33-ga10h-v1.1.dts
+++ b/src/arm/sun8i-a33-ga10h-v1.1.dts
@@ -42,22 +42,15 @@
 
 /dts-v1/;
 #include "sun8i-a33.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sun8i-reference-design-tablet.dtsi"
 
 / {
 	model = "Allwinner GA10H Quad Core Tablet (v1.1)";
 	compatible = "allwinner,ga10h-v1.1", "allwinner,sun8i-a33";
 
 	aliases {
-		serial0 = &r_uart;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
+		/* Make u-boot set mac-address for rtl8703as (no eeprom) */
+		ethernet0 = &rtl8703as;
 	};
 };
 
@@ -65,36 +58,17 @@
 	status = "okay";
 };
 
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl3675";
+	firmware-name = "gsl3675-ga10h.fw";
+	touchscreen-size-x = <1630>;
+	touchscreen-size-y = <990>;
+	touchscreen-inverted-y;
 	status = "okay";
 };
 
 &lradc {
-	vref-supply = <&reg_vcc3v0>;
-	status = "okay";
-
-	button@200 {
-		label = "Volume Up";
-		linux,code = <KEY_VOLUMEUP>;
-		channel = <0>;
-		voltage = <200000>;
-	};
-
-	button@400 {
-		label = "Volume Down";
-		linux,code = <KEY_VOLUMEDOWN>;
-		channel = <0>;
-		voltage = <400000>;
-	};
-
 	button@600 {
 		label = "Back";
 		linux,code = <KEY_BACK>;
@@ -103,40 +77,19 @@
 	};
 };
 
-&mmc0 {
+&mmc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
-	vmmc-supply = <&reg_vcc3v0>;
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_dldo1>;
 	bus-width = <4>;
-	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-	cd-inverted;
+	non-removable;
 	status = "okay";
-};
 
-&ohci0 {
-	status = "okay";
-};
-
-&pio {
-	mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
-		allwinner,pins = "PB4";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	rtl8703as: sdio_wifi@1 {
+		reg = <1>;
 	};
 };
 
-&r_uart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&r_uart_pins_a>;
-	status = "okay";
-};
-
-&usb_otg {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy {
+&ohci0 {
 	status = "okay";
 };
diff --git a/src/arm/sun8i-a33-inet-d978-rev2.dts b/src/arm/sun8i-a33-inet-d978-rev2.dts
new file mode 100644
index 000000000000..fb4665576dff
--- /dev/null
+++ b/src/arm/sun8i-a33-inet-d978-rev2.dts
@@ -0,0 +1,108 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ * Copyright 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "INet-D978 Rev 02";
+	compatible = "primux,inet-d978-rev2", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		/* Delete debug UART as serial0 is the UART for bluetooth */
+		/delete-property/stdout-path;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_d978>;
+
+		home {
+			label = "d978:blue:home";
+			gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+		};
+	};
+};
+
+&mmc1_pins_a {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_dldo1>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723bs: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&r_pio {
+	led_pin_d978: led_pin_d978@0 {
+		allwinner,pins = "PL5";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&r_uart {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_a>,
+		    <&uart1_pins_cts_rts_a>;
+	status = "okay";
+};
diff --git a/src/arm/sun8i-a33-ippo-q8h-v1.2.dts b/src/arm/sun8i-a33-ippo-q8h-v1.2.dts
index 44b32296a025..b0bc2360f8c4 100644
--- a/src/arm/sun8i-a33-ippo-q8h-v1.2.dts
+++ b/src/arm/sun8i-a33-ippo-q8h-v1.2.dts
@@ -48,18 +48,3 @@
 	model = "Q8 A33 Tablet";
 	compatible = "allwinner,q8-a33", "allwinner,sun8i-a33";
 };
-
-/*
- * FIXME for now we only support host mode and rely on u-boot to have
- * turned on Vbus which is controlled by the axp223 pmic on the board.
- *
- * Once we have axp223 support we should switch to fully supporting otg.
- */
-&usb_otg {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
diff --git a/src/arm/sun8i-a33-olinuxino.dts b/src/arm/sun8i-a33-olinuxino.dts
new file mode 100644
index 000000000000..9ea637e82b2d
--- /dev/null
+++ b/src/arm/sun8i-a33-olinuxino.dts
@@ -0,0 +1,226 @@
+/*
+ * Copyright 2016 - Stefan Mavrodiev <stefan.mavrodiev@gmail.com>
+ *                  Olimex LTD. <support@olimex.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Olimex A33-OLinuXino";
+	compatible = "olimex,a33-olinuxino","allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_olinuxino>;
+
+		green {
+			label = "a33-olinuxino:green:usr";
+			gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	led_pin_olinuxino: led_pins@0 {
+		allwinner,pins = "PB7";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
+		allwinner,pins = "PB4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PB3";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_b>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	status = "okay";
+};
diff --git a/src/arm/sun8i-a33-q8-tablet.dts b/src/arm/sun8i-a33-q8-tablet.dts
index 44b32296a025..b0bc2360f8c4 100644
--- a/src/arm/sun8i-a33-q8-tablet.dts
+++ b/src/arm/sun8i-a33-q8-tablet.dts
@@ -48,18 +48,3 @@
 	model = "Q8 A33 Tablet";
 	compatible = "allwinner,q8-a33", "allwinner,sun8i-a33";
 };
-
-/*
- * FIXME for now we only support host mode and rely on u-boot to have
- * turned on Vbus which is controlled by the axp223 pmic on the board.
- *
- * Once we have axp223 support we should switch to fully supporting otg.
- */
-&usb_otg {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
diff --git a/src/arm/sun8i-a33-sinlinx-sina33.dts b/src/arm/sun8i-a33-sinlinx-sina33.dts
index fef6abc0a703..71bb9418c5f9 100644
--- a/src/arm/sun8i-a33-sinlinx-sina33.dts
+++ b/src/arm/sun8i-a33-sinlinx-sina33.dts
@@ -213,6 +213,11 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
 &usbphy {
 	status = "okay";
 	usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */
diff --git a/src/arm/sun8i-a33.dtsi b/src/arm/sun8i-a33.dtsi
index 001d8402ca18..fd1e1cddd4a8 100644
--- a/src/arm/sun8i-a33.dtsi
+++ b/src/arm/sun8i-a33.dtsi
@@ -59,107 +59,179 @@
 		};
 	};
 
+	de: display-engine {
+		compatible = "allwinner,sun8i-a33-display-engine";
+		allwinner,pipelines = <&fe0>;
+		status = "disabled";
+	};
+
 	memory {
 		reg = <0x40000000 0x80000000>;
 	};
 
-	clocks {
-		/* Dummy clock for pll11 (DDR1) until actually implemented */
-		pll11: pll11_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-			clock-output-names = "pll11";
-		};
+	soc@01c00000 {
+		tcon0: lcd-controller@01c0c000 {
+			compatible = "allwinner,sun8i-a33-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_LCD>,
+				 <&ccu CLK_LCD_CH0>;
+			clock-names = "ahb",
+				      "tcon-ch0";
+			clock-output-names = "tcon-pixel-clock";
+			resets = <&ccu RST_BUS_LCD>;
+			reset-names = "lcd";
+			status = "disabled";
 
-		ahb1_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a33-ahb1-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb1>;
-			clock-indices = <1>, <5>,
-				        <6>, <8>, <9>,
-				        <10>, <13>, <14>,
-					<19>, <20>,
-					<21>, <24>, <26>,
-					<29>, <32>, <36>,
-					<40>, <44>, <46>,
-					<52>, <53>,
-					<54>, <57>,
-					<58>;
-			clock-output-names = "ahb1_mipidsi", "ahb1_ss",
-					"ahb1_dma","ahb1_mmc0", "ahb1_mmc1",
-					"ahb1_mmc2", "ahb1_nand", "ahb1_sdram",
-					"ahb1_hstimer", "ahb1_spi0",
-					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
-					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
-					"ahb1_csi", "ahb1_be",	"ahb1_fe",
-					"ahb1_gpu", "ahb1_msgbox",
-					"ahb1_spinlock", "ahb1_drc",
-					"ahb1_sat";
-		};
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
 
-		ss_clk: clk@01c2009c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2009c 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "ss";
-		};
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
 
-		mbus_clk: clk@01c2015c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-mbus-clk";
-			reg = <0x01c2015c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5>, <&pll11>;
-			clock-output-names = "mbus";
+					tcon0_in_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
 		};
-	};
 
-	soc@01c00000 {
 		crypto: crypto-engine@01c15000 {
 			compatible = "allwinner,sun4i-a10-crypto";
 			reg = <0x01c15000 0x1000>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 5>, <&ss_clk>;
+			clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
 			clock-names = "ahb", "mod";
-			resets = <&ahb1_rst 5>;
+			resets = <&ccu RST_BUS_SS>;
 			reset-names = "ahb";
 		};
 
-		usb_otg: usb@01c19000 {
-			compatible = "allwinner,sun8i-a33-musb";
-			reg = <0x01c19000 0x0400>;
-			clocks = <&ahb1_gates 24>;
-			resets = <&ahb1_rst 24>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "mc";
-			phys = <&usbphy 0>;
-			phy-names = "usb";
-			extcon = <&usbphy 0>;
+		fe0: display-frontend@01e00000 {
+			compatible = "allwinner,sun8i-a33-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>,
+				 <&ccu CLK_DRAM_DE_FE>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_BUS_DE_FE>;
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+				};
+			};
 		};
 
-		usbphy: phy@01c19400 {
-			compatible = "allwinner,sun8i-a33-usb-phy";
-			reg = <0x01c19400 0x14>,
-			      <0x01c1a800 0x4>;
-			reg-names = "phy_ctrl",
-				    "pmu1";
-			clocks = <&usb_clk 8>,
-				 <&usb_clk 9>;
-			clock-names = "usb0_phy",
-				      "usb1_phy";
-			resets = <&usb_clk 0>,
-				 <&usb_clk 1>;
-			reset-names = "usb0_reset",
-				      "usb1_reset";
-			status = "disabled";
-			#phy-cells = <1>;
+		be0: display-backend@01e60000 {
+			compatible = "allwinner,sun8i-a33-display-backend";
+			reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
+			reg-names = "be", "sat";
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>;
+			clock-names = "ahb", "mod",
+				      "ram", "sat";
+			resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
+			reset-names = "be", "sat";
+			assigned-clocks = <&ccu CLK_DE_BE>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_in_be0>;
+					};
+				};
+			};
+		};
+
+		drc0: drc@01e70000 {
+			compatible = "allwinner,sun8i-a33-drc";
+			reg = <0x01e70000 0x10000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>,
+				 <&ccu CLK_DRAM_DRC>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_DRC>;
+
+			assigned-clocks = <&ccu CLK_DRC>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					drc0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_drc0>;
+					};
+				};
+
+				drc0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					drc0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_drc0>;
+					};
+				};
+			};
 		};
 	};
 };
 
+&ccu {
+	compatible = "allwinner,sun8i-a33-ccu";
+};
+
 &pio {
 	compatible = "allwinner,sun8i-a33-pinctrl";
 	interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
@@ -173,3 +245,13 @@
 	};
 
 };
+
+&usb_otg {
+	compatible = "allwinner,sun8i-a33-musb";
+};
+
+&usbphy {
+	compatible = "allwinner,sun8i-a33-usb-phy";
+	reg = <0x01c19400 0x14>, <0x01c1a800 0x4>;
+	reg-names = "phy_ctrl", "pmu1";
+};
diff --git a/src/arm/sun8i-h3-bananapi-m2-plus.dts b/src/arm/sun8i-h3-bananapi-m2-plus.dts
new file mode 100644
index 000000000000..06fddaae8edd
--- /dev/null
+++ b/src/arm/sun8i-h3-bananapi-m2-plus.dts
@@ -0,0 +1,195 @@
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Banana Pi BPI-M2-Plus";
+	compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_led_bpi_m2p>;
+
+		pwr_led {
+			label = "bananapi-m2-plus:red:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sw_r_bpi_m2p>;
+
+		sw4 {
+			label = "power";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_en_bpi_m2p>;
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&r_pio {
+	pwr_led_bpi_m2p: led_pins@0 {
+		allwinner,pins = "PL10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	sw_r_bpi_m2p: key_pins@0 {
+		allwinner,pins = "PL3";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	wifi_en_bpi_m2p: wifi_en_pin {
+		allwinner,pins = "PL7";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is on as long as VCC-IO is on */
+	status = "okay";
+};
diff --git a/src/arm/sun8i-h3-nanopi-m1.dts b/src/arm/sun8i-h3-nanopi-m1.dts
new file mode 100644
index 000000000000..ec63d104b404
--- /dev/null
+++ b/src/arm/sun8i-h3-nanopi-m1.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+	model = "FriendlyArm NanoPi M1";
+	compatible = "friendlyarm,nanopi-m1", "allwinner,sun8i-h3";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
diff --git a/src/arm/sun8i-h3-nanopi-neo.dts b/src/arm/sun8i-h3-nanopi-neo.dts
new file mode 100644
index 000000000000..8d2cc6e9a03f
--- /dev/null
+++ b/src/arm/sun8i-h3-nanopi-neo.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2016 James Pettigrew <james@innovum.com.au>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+	model = "FriendlyARM NanoPi NEO";
+	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
+};
diff --git a/src/arm/sun8i-h3-nanopi.dtsi b/src/arm/sun8i-h3-nanopi.dtsi
new file mode 100644
index 000000000000..8038aa29a5a7
--- /dev/null
+++ b/src/arm/sun8i-h3-nanopi.dtsi
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2016 James Pettigrew <james@innovum.com.au>
+ * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_npi>, <&leds_r_npi>;
+
+		status {
+			label = "nanopi:blue:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		pwr {
+			label = "nanopi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+		input-name = "k1";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sw_r_npi>;
+
+		k1@0 {
+			label = "k1";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	leds_npi: led_pins@0 {
+		allwinner,pins = "PA10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&r_pio {
+	leds_r_npi: led_pins@0 {
+		allwinner,pins = "PL10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	sw_r_npi: key_pins@0 {
+		allwinner,pins = "PL3";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/src/arm/sun8i-h3-orangepi-2.dts b/src/arm/sun8i-h3-orangepi-2.dts
index f93f5d1695c4..e5bcaba3e87f 100644
--- a/src/arm/sun8i-h3-orangepi-2.dts
+++ b/src/arm/sun8i-h3-orangepi-2.dts
@@ -54,6 +54,8 @@
 
 	aliases {
 		serial0 = &uart0;
+		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+		ethernet1 = &rtl8189;
 	};
 
 	chosen {
@@ -131,6 +133,14 @@
 	bus-width = <4>;
 	non-removable;
 	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189: sdio_wifi@1 {
+		reg = <1>;
+	};
 };
 
 &pio {
@@ -176,6 +186,24 @@
 	status = "okay";
 };
 
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
 &usb1_vbus_pin_a {
 	allwinner,pins = "PG13";
 };
diff --git a/src/arm/sun8i-h3-orangepi-lite.dts b/src/arm/sun8i-h3-orangepi-lite.dts
new file mode 100644
index 000000000000..1550fee1ec68
--- /dev/null
+++ b/src/arm/sun8i-h3-orangepi-lite.dts
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Xunlong Orange Pi Lite";
+	compatible = "xunlong,orangepi-lite", "allwinner,sun8i-h3";
+
+	aliases {
+		/* The H3 emac is not used so the wifi is ethernet0 */
+		ethernet0 = &rtl8189ftv;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sw_r_opc>;
+
+		sw4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189ftv: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&pio {
+	leds_opc: led_pins@0 {
+		allwinner,pins = "PA15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&r_pio {
+	leds_r_opc: led_pins@0 {
+		allwinner,pins = "PL10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	sw_r_opc: key_pins@0 {
+		allwinner,pins = "PL3";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on */
+	status = "okay";
+};
diff --git a/src/arm/sun8i-h3-orangepi-one.dts b/src/arm/sun8i-h3-orangepi-one.dts
index 0adf932fd923..5c9b5bfa5c21 100644
--- a/src/arm/sun8i-h3-orangepi-one.dts
+++ b/src/arm/sun8i-h3-orangepi-one.dts
@@ -139,6 +139,24 @@
 	status = "okay";
 };
 
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
 &usbphy {
 	/* USB VBUS is always on */
 	status = "okay";
diff --git a/src/arm/sun8i-h3-orangepi-pc-plus.dts b/src/arm/sun8i-h3-orangepi-pc-plus.dts
new file mode 100644
index 000000000000..851fd2c2cc8c
--- /dev/null
+++ b/src/arm/sun8i-h3-orangepi-pc-plus.dts
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* The Orange Pi PC Plus is an extended version of the regular PC */
+#include "sun8i-h3-orangepi-pc.dts"
+
+/ {
+	model = "Xunlong Orange Pi PC Plus";
+	compatible = "xunlong,orangepi-pc-plus", "allwinner,sun8i-h3";
+
+	aliases {
+		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+		ethernet1 = &rtl8189ftv;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189ftv: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+	/* eMMC is missing pull-ups */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
diff --git a/src/arm/sun8i-h3-orangepi-pc.dts b/src/arm/sun8i-h3-orangepi-pc.dts
index daf50b9a6657..3ec971285aa3 100644
--- a/src/arm/sun8i-h3-orangepi-pc.dts
+++ b/src/arm/sun8i-h3-orangepi-pc.dts
@@ -161,6 +161,24 @@
 	status = "okay";
 };
 
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
 &usbphy {
 	/* USB VBUS is always on */
 	status = "okay";
diff --git a/src/arm/sun8i-h3-orangepi-plus.dts b/src/arm/sun8i-h3-orangepi-plus.dts
index b0cb41787e09..bb585918cf54 100644
--- a/src/arm/sun8i-h3-orangepi-plus.dts
+++ b/src/arm/sun8i-h3-orangepi-plus.dts
@@ -44,7 +44,7 @@
 #include "sun8i-h3-orangepi-2.dts"
 
 / {
-	model = "Xunlong Orange Pi Plus";
+	model = "Xunlong Orange Pi Plus / Plus 2";
 	compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
 
 	reg_usb3_vbus: usb3-vbus {
diff --git a/src/arm/sun8i-h3-orangepi-plus2e.dts b/src/arm/sun8i-h3-orangepi-plus2e.dts
new file mode 100644
index 000000000000..5851a47a3089
--- /dev/null
+++ b/src/arm/sun8i-h3-orangepi-plus2e.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The Orange Pi Plus 2E is an extended version of the Orange Pi PC Plus,
+ * with 2G RAM and an external gbit ethernet phy.
+ */
+
+#include "sun8i-h3-orangepi-pc-plus.dts"
+
+/ {
+	model = "Xunlong Orange Pi Plus 2E";
+	compatible = "xunlong,orangepi-plus2e", "allwinner,sun8i-h3";
+};
diff --git a/src/arm/sun8i-h3.dtsi b/src/arm/sun8i-h3.dtsi
index 4a4926b0b0ed..6c14a6f72820 100644
--- a/src/arm/sun8i-h3.dtsi
+++ b/src/arm/sun8i-h3.dtsi
@@ -42,8 +42,10 @@
 
 #include "skeleton.dtsi"
 
+#include <dt-bindings/clock/sun8i-h3-ccu.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/reset/sun8i-h3-ccu.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -104,191 +106,6 @@
 			clock-output-names = "osc32k";
 		};
 
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		/* dummy clock until actually implemented */
-		pll5: pll5_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-			clock-output-names = "pll5";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6", "pll6x2";
-		};
-
-		pll6d2: pll6d2_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <2>;
-			clock-mult = <1>;
-			clocks = <&pll6 0>;
-			clock-output-names = "pll6d2";
-		};
-
-		/* dummy clock until pll6 can be reused */
-		pll8: pll8_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <1>;
-			clock-output-names = "pll8";
-		};
-
-		cpu: cpu_clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20050 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi_clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-axi-clk";
-			reg = <0x01c20050 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		ahb1: ahb1_clk@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-ahb1-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
-			clock-output-names = "ahb1";
-		};
-
-		ahb2: ahb2_clk@01c2005c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-h3-ahb2-clk";
-			reg = <0x01c2005c 0x4>;
-			clocks = <&ahb1>, <&pll6d2>;
-			clock-output-names = "ahb2";
-		};
-
-		apb1: apb1_clk@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb1>;
-			clock-output-names = "apb1";
-		};
-
-		apb2: apb2_clk@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
-			clock-output-names = "apb2";
-		};
-
-		bus_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-h3-bus-gates-clk";
-			reg = <0x01c20060 0x14>;
-			clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>;
-			clock-names = "ahb1", "ahb2", "apb1", "apb2";
-			clock-indices = <5>, <6>, <8>,
-					<9>, <10>, <13>,
-					<14>, <17>, <18>,
-					<19>, <20>,
-					<21>, <23>,
-					<24>, <25>,
-					<26>, <27>,
-					<28>, <29>,
-					<30>, <31>, <32>,
-					<35>, <36>, <37>,
-					<40>, <41>, <43>,
-					<44>, <52>, <53>,
-					<54>, <64>,
-					<65>, <69>, <72>,
-					<76>, <77>, <78>,
-					<96>, <97>, <98>,
-					<112>, <113>,
-					<114>, <115>,
-					<116>, <128>, <135>;
-			clock-output-names = "bus_ce", "bus_dma", "bus_mmc0",
-					     "bus_mmc1", "bus_mmc2", "bus_nand",
-					     "bus_sdram", "bus_gmac", "bus_ts",
-					     "bus_hstimer", "bus_spi0",
-					     "bus_spi1", "bus_otg",
-					     "bus_otg_ehci0", "bus_ehci1",
-					     "bus_ehci2", "bus_ehci3",
-					     "bus_otg_ohci0", "bus_ohci1",
-					     "bus_ohci2", "bus_ohci3", "bus_ve",
-					     "bus_lcd0", "bus_lcd1", "bus_deint",
-					     "bus_csi", "bus_tve", "bus_hdmi",
-					     "bus_de", "bus_gpu", "bus_msgbox",
-					     "bus_spinlock", "bus_codec",
-					     "bus_spdif", "bus_pio", "bus_ths",
-					     "bus_i2s0", "bus_i2s1", "bus_i2s2",
-					     "bus_i2c0", "bus_i2c1", "bus_i2c2",
-					     "bus_uart0", "bus_uart1",
-					     "bus_uart2", "bus_uart3",
-					     "bus_scr", "bus_ephy", "bus_dbg";
-		};
-
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6 0>, <&pll8>;
-			clock-output-names = "mmc0",
-					     "mmc0_output",
-					     "mmc0_sample";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6 0>, <&pll8>;
-			clock-output-names = "mmc1",
-					     "mmc1_output",
-					     "mmc1_sample";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6 0>, <&pll8>;
-			clock-output-names = "mmc2",
-					     "mmc2_output",
-					     "mmc2_sample";
-		};
-
-		usb_clk: clk@01c200cc {
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			compatible = "allwinner,sun8i-h3-usb-clk";
-			reg = <0x01c200cc 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "usb_phy0", "usb_phy1",
-					     "usb_phy2", "usb_phy3",
-					     "usb_ohci0", "usb_ohci1",
-					     "usb_ohci2", "usb_ohci3";
-		};
-
-		mbus_clk: clk@01c2015c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-mbus-clk";
-			reg = <0x01c2015c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5>;
-			clock-output-names = "mbus";
-		};
-
 		apb0: apb0_clk {
 			compatible = "fixed-factor-clock";
 			#clock-cells = <0>;
@@ -327,23 +144,23 @@
 			compatible = "allwinner,sun8i-h3-dma";
 			reg = <0x01c02000 0x1000>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&bus_gates 6>;
-			resets = <&ahb_rst 6>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
 			#dma-cells = <1>;
 		};
 
 		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&bus_gates 8>,
-				 <&mmc0_clk 0>,
-				 <&mmc0_clk 1>,
-				 <&mmc0_clk 2>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb_rst 8>;
+			resets = <&ccu RST_BUS_MMC0>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -352,17 +169,17 @@
 		};
 
 		mmc1: mmc@01c10000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c10000 0x1000>;
-			clocks = <&bus_gates 9>,
-				 <&mmc1_clk 0>,
-				 <&mmc1_clk 1>,
-				 <&mmc1_clk 2>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb_rst 9>;
+			resets = <&ccu RST_BUS_MMC1>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -371,17 +188,17 @@
 		};
 
 		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&bus_gates 10>,
-				 <&mmc2_clk 0>,
-				 <&mmc2_clk 1>,
-				 <&mmc2_clk 2>;
+			clocks = <&ccu CLK_BUS_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb_rst 10>;
+			resets = <&ccu RST_BUS_MMC2>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -401,18 +218,18 @@
 				    "pmu1",
 				    "pmu2",
 				    "pmu3";
-			clocks = <&usb_clk 8>,
-				 <&usb_clk 9>,
-				 <&usb_clk 10>,
-				 <&usb_clk 11>;
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>,
+				 <&ccu CLK_USB_PHY3>;
 			clock-names = "usb0_phy",
 				      "usb1_phy",
 				      "usb2_phy",
 				      "usb3_phy";
-			resets = <&usb_clk 0>,
-				 <&usb_clk 1>,
-				 <&usb_clk 2>,
-				 <&usb_clk 3>;
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>,
+				 <&ccu RST_USB_PHY3>;
 			reset-names = "usb0_reset",
 				      "usb1_reset",
 				      "usb2_reset",
@@ -425,8 +242,8 @@
 			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
 			reg = <0x01c1b000 0x100>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&bus_gates 25>, <&bus_gates 29>;
-			resets = <&ahb_rst 25>, <&ahb_rst 29>;
+			clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
 			phys = <&usbphy 1>;
 			phy-names = "usb";
 			status = "disabled";
@@ -436,9 +253,9 @@
 			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
 			reg = <0x01c1b400 0x100>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&bus_gates 29>, <&bus_gates 25>,
-				 <&usb_clk 17>;
-			resets = <&ahb_rst 29>, <&ahb_rst 25>;
+			clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
 			phys = <&usbphy 1>;
 			phy-names = "usb";
 			status = "disabled";
@@ -448,8 +265,8 @@
 			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
 			reg = <0x01c1c000 0x100>;
 			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&bus_gates 26>, <&bus_gates 30>;
-			resets = <&ahb_rst 26>, <&ahb_rst 30>;
+			clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
+			resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
 			phys = <&usbphy 2>;
 			phy-names = "usb";
 			status = "disabled";
@@ -459,9 +276,9 @@
 			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
 			reg = <0x01c1c400 0x100>;
 			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&bus_gates 30>, <&bus_gates 26>,
-				 <&usb_clk 18>;
-			resets = <&ahb_rst 30>, <&ahb_rst 26>;
+			clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
 			phys = <&usbphy 2>;
 			phy-names = "usb";
 			status = "disabled";
@@ -471,8 +288,8 @@
 			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
 			reg = <0x01c1d000 0x100>;
 			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&bus_gates 27>, <&bus_gates 31>;
-			resets = <&ahb_rst 27>, <&ahb_rst 31>;
+			clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
+			resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
 			phys = <&usbphy 3>;
 			phy-names = "usb";
 			status = "disabled";
@@ -482,28 +299,52 @@
 			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
 			reg = <0x01c1d400 0x100>;
 			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&bus_gates 31>, <&bus_gates 27>,
-				 <&usb_clk 19>;
-			resets = <&ahb_rst 31>, <&ahb_rst 27>;
+			clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
 			phys = <&usbphy 3>;
 			phy-names = "usb";
 			status = "disabled";
 		};
 
+		ccu: clock@01c20000 {
+			compatible = "allwinner,sun8i-h3-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		pio: pinctrl@01c20800 {
 			compatible = "allwinner,sun8i-h3-pinctrl";
 			reg = <0x01c20800 0x400>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&bus_gates 69>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
-			uart0_pins_a: uart0@0 {
-				allwinner,pins = "PA4", "PA5";
-				allwinner,function = "uart0";
+			i2c0_pins: i2c0 {
+				allwinner,pins = "PA11", "PA12";
+				allwinner,function = "i2c0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c1_pins: i2c1 {
+				allwinner,pins = "PA18", "PA19";
+				allwinner,function = "i2c1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c2_pins: i2c2 {
+				allwinner,pins = "PE12", "PE13";
+				allwinner,function = "i2c2";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
@@ -540,24 +381,55 @@
 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
-		};
 
-		ahb_rst: reset@01c202c0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-ahb1-reset";
-			reg = <0x01c202c0 0xc>;
-		};
+			spi0_pins: spi0 {
+				allwinner,pins = "PC0", "PC1", "PC2", "PC3";
+				allwinner,function = "spi0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
 
-		apb1_rst: reset@01c202d0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d0 0x4>;
-		};
+			spi1_pins: spi1 {
+				allwinner,pins = "PA15", "PA16", "PA14", "PA13";
+				allwinner,function = "spi1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
 
-		apb2_rst: reset@01c202d8 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d8 0x4>;
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PA4", "PA5";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart1_pins: uart1 {
+				allwinner,pins = "PG6", "PG7";
+				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart1_rts_cts_pins: uart1_rts_cts {
+				allwinner,pins = "PG8", "PG9";
+				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart2_pins: uart2 {
+				allwinner,pins = "PA0", "PA1";
+				allwinner,function = "uart2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart3_pins: uart3 {
+				allwinner,pins = "PA13", "PA14";
+				allwinner,function = "uart3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
 		};
 
 		timer@01c20c00 {
@@ -568,20 +440,60 @@
 			clocks = <&osc24M>;
 		};
 
+		spi0: spi@01c68000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c68000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins>;
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@01c69000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c69000 0x1000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 24>, <&dma 24>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins>;
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		wdt0: watchdog@01c20ca0 {
 			compatible = "allwinner,sun6i-a31-wdt";
 			reg = <0x01c20ca0 0x20>;
 			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		pwm: pwm@01c21400 {
+			compatible = "allwinner,sun8i-h3-pwm";
+			reg = <0x01c21400 0x8>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&bus_gates 112>;
-			resets = <&apb2_rst 16>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -593,8 +505,8 @@
 			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&bus_gates 113>;
-			resets = <&apb2_rst 17>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -606,8 +518,8 @@
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&bus_gates 114>;
-			resets = <&apb2_rst 18>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -619,13 +531,52 @@
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&bus_gates 115>;
-			resets = <&apb2_rst 19>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		gic: interrupt-controller@01c81000 {
 			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
 			reg = <0x01c81000 0x1000>,
@@ -664,7 +615,8 @@
 			compatible = "allwinner,sun8i-h3-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			resets = <&apb0_reset 0>;
 			gpio-controller;
 			#gpio-cells = <3>;
diff --git a/src/arm/sun8i-q8-common.dtsi b/src/arm/sun8i-q8-common.dtsi
index 346a49d805a7..29f837a47771 100644
--- a/src/arm/sun8i-q8-common.dtsi
+++ b/src/arm/sun8i-q8-common.dtsi
@@ -39,140 +39,62 @@
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
-#include "sunxi-q8-common.dtsi"
-
-#include <dt-bindings/pwm/pwm.h>
+#include "sunxi-reference-design-tablet.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
 
 / {
 	aliases {
 		serial0 = &r_uart;
+		/* Make u-boot set mac-address for wifi without an eeprom */
+		ethernet0 = &sdio_wifi;
 	};
 
-	backlight: backlight {
-		compatible = "pwm-backlight";
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		/*
+		 * Q8 boards use various PL# pins as wifi-en. On other boards
+		 * these may be connected to a wifi module output pin. To avoid
+		 * short-circuits we configure these as inputs with pull-ups via
+		 * pinctrl, instead of listing them as active-low reset-gpios.
+		 */
 		pinctrl-names = "default";
-		pinctrl-0 = <&bl_en_pin_q8>;
-		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-		default-brightness-level = <8>;
-		enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		pinctrl-0 = <&wifi_pwrseq_pin_q8>;
+		/* The esp8089 needs 200 ms after driving wifi-en high */
+		post-power-on-delay-ms = <200>;
 	};
+};
 
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
+&ehci0 {
+	status  = "okay";
 };
 
-&mmc0 {
+&mmc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>;
-	vmmc-supply = <&reg_dcdc1>;
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
-	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-	cd-inverted;
+	non-removable;
 	status = "okay";
-};
 
-&pio {
-	bl_en_pin_q8: bl_en_pin@0 {
-		allwinner,pins = "PH6";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	sdio_wifi: sdio_wifi@1 {
+		reg = <1>;
 	};
+};
 
-	mmc0_cd_pin_q8: mmc0_cd_pin@0 {
-		allwinner,pins = "PB4";
+&mmc1_pins_a {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&r_pio {
+	wifi_pwrseq_pin_q8: wifi_pwrseq_pin@0 {
+		allwinner,pins = "PL6", "PL7", "PL11";
 		allwinner,function = "gpio_in";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 };
 
-&r_rsb {
-	status = "okay";
-
-	axp22x: pmic@3a3 {
-		compatible = "x-powers,axp223";
-		reg = <0x3a3>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		eldoin-supply = <&reg_dcdc1>;
-	};
-};
-
-#include "axp22x.dtsi"
-
-&reg_aldo1 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-io";
-};
-
-&reg_aldo2 {
-	regulator-always-on;
-	regulator-min-microvolt = <2350000>;
-	regulator-max-microvolt = <2650000>;
-	regulator-name = "vdd-dll";
-};
-
-&reg_aldo3 {
-	regulator-always-on;
-	regulator-min-microvolt = <2700000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "vcc-pll-avcc";
-};
-
-&reg_dc1sw {
-	regulator-name = "vcc-lcd";
-};
-
-&reg_dc5ldo {
-	regulator-always-on;
-	regulator-min-microvolt = <900000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-cpus";
-};
-
-&reg_dcdc1 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-3v0";
-};
-
-&reg_dcdc2 {
-	regulator-always-on;
-	regulator-min-microvolt = <900000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-sys";
-};
-
-&reg_dcdc3 {
-	regulator-always-on;
-	regulator-min-microvolt = <900000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc5 {
-	regulator-always-on;
-	regulator-min-microvolt = <1500000>;
-	regulator-max-microvolt = <1500000>;
-	regulator-name = "vcc-dram";
-};
-
-&reg_rtc_ldo {
-	regulator-name = "vcc-rtc";
-};
-
-&r_uart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&r_uart_pins_a>;
-	status = "okay";
-};
-
-&simplefb_lcd {
-	vcc-lcd-supply = <&reg_dc1sw>;
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
 };
diff --git a/src/arm/sun8i-r16-parrot.dts b/src/arm/sun8i-r16-parrot.dts
new file mode 100644
index 000000000000..47553e522982
--- /dev/null
+++ b/src/arm/sun8i-r16-parrot.dts
@@ -0,0 +1,351 @@
+/*
+ * Copyright 2016 Quentin Schulz
+ *
+ * Quentin Schulz <quentin.schulz@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Allwinner R16 EVB (Parrot)";
+	compatible = "allwinner,parrot", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_parrot>;
+
+		led1 {
+			label = "parrot:led1:usr";
+			gpio = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+		};
+
+		led2 {
+			label = "parrot:led2:usr";
+			gpio = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
+	};
+
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	/*
+	 * FIXME: An as-yet-unknown accelerometer is connected to this
+	 * i2c bus.
+	 */
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button@0 {
+		label = "V+";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+
+	button@1 {
+		label = "V-";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <390000>;
+	};
+
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_parrot>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 3 14 GPIO_ACTIVE_LOW>; /* PD14 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_parrot>;
+	vmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_parrot: mmc0_cd_pin@0 {
+		allwinner,pins = "PD14";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	led_pins_parrot: led_pins@0 {
+		allwinner,pins = "PE16", "PE17";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_id_det: usb0_id_detect_pin@0 {
+		allwinner,pins = "PD10";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb1_vbus_pin_parrot: usb1_vbus_pin@0 {
+		allwinner,pins = "PD12";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&r_pio {
+	wifi_reset_pin_parrot: wifi_reset_pin@0 {
+		allwinner,pins = "PL6";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		drivevbus-supply = <&reg_vcc5v0>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	/*
+	 * TODO: WiFi chip needs dldo1 AND dldo2 to be on to be powered.
+	 * Remove next line once it is possible to sync two regulators.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi0";
+};
+
+&reg_dldo2 {
+	/*
+	 * TODO: WiFi chip needs dldo1 AND dldo2 to be on to be powered.
+	 * Remove next line once it is possible to sync two regulators.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi1";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0-csi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-dsp";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "eldo3";
+};
+
+&reg_usb1_vbus {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_vbus_pin_parrot>;
+	gpio = <&pio 3 12 GPIO_ACTIVE_HIGH>; /* PD12 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_b>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_det>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb0_id_det-gpios = <&pio 3 10 GPIO_ACTIVE_HIGH>; /* PD10 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+};
diff --git a/src/arm/sun8i-reference-design-tablet.dtsi b/src/arm/sun8i-reference-design-tablet.dtsi
new file mode 100644
index 000000000000..69bc0cd26ca7
--- /dev/null
+++ b/src/arm/sun8i-reference-design-tablet.dtsi
@@ -0,0 +1,249 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-reference-design-tablet.dtsi"
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		serial0 = &r_uart;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en_pin>;
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	/*
+	 * The gsl1680 is rated at 400KHz and it will not work reliable at
+	 * 100KHz, this has been confirmed on multiple different q8 tablets.
+	 * The gsl1680 is the only device on this bus.
+	 */
+	clock-frequency = <400000>;
+
+	touchscreen: touchscreen@0 {
+		interrupt-parent = <&pio>;
+		interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_power_pin>;
+		power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+		/* Tablet dts must provide reg and compatible */
+		status = "disabled";
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	bl_en_pin: bl_en_pin@0 {
+		allwinner,pins = "PH6";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin: mmc0_cd_pin@0 {
+		allwinner,pins = "PB4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	ts_power_pin: ts_power_pin@0 {
+		allwinner,pins = "PH1";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH8";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		drivevbus-supply = <&reg_vcc5v0>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-touchscreen";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&r_uart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_uart_pins_a>;
+	status = "okay";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	status = "okay";
+};
diff --git a/src/arm/sun9i-a80-cubieboard4.dts b/src/arm/sun9i-a80-cubieboard4.dts
index eb2ccd0a3bd5..67b02fe7f11c 100644
--- a/src/arm/sun9i-a80-cubieboard4.dts
+++ b/src/arm/sun9i-a80-cubieboard4.dts
@@ -45,7 +45,6 @@
 
 /dts-v1/;
 #include "sun9i-a80.dtsi"
-#include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
@@ -77,38 +76,45 @@
 			gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
 		};
 	};
-};
 
-&pio {
-	led_pins_cubieboard4: led-pins@0 {
-		allwinner,pins = "PH6", "PH17";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-
-	mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
-		allwinner,pins = "PH18";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+		/* enables internal regulator and de-asserts reset */
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
 	};
 };
 
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>;
-	vmmc-supply = <&reg_vcc3v0>;
+	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */
 	cd-inverted;
 	status = "okay";
 };
 
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>, <&wifi_en_pin_cubieboard4>;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_cldo3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc1_pins {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_8bit_pins>;
-	vmmc-supply = <&reg_vcc3v0>;
+	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <8>;
 	non-removable;
 	cap-mmc-hw-reset;
@@ -120,14 +126,311 @@
 	allwinner,drive = <SUN4I_PINCTRL_40_MA>;
 };
 
+&osc32k {
+	/* osc32k input is from AC100 */
+	clocks = <&ac100_rtc 0>;
+};
+
+&pio {
+	led_pins_cubieboard4: led-pins@0 {
+		allwinner,pins = "PH6", "PH17";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
+		allwinner,pins = "PH18";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
 &r_ir {
 	status = "okay";
 };
 
+&r_pio {
+	wifi_en_pin_cubieboard4: wifi_en_pin@0 {
+		allwinner,pins = "PL2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
 &r_rsb {
 	status = "okay";
+
+	axp809: pmic@3a3 {
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				/*
+				 * TODO: This should be handled by the
+				 * USB PHY driver.
+				 */
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc33-usbh";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pb-io-cam";
+			};
+
+			aldo3 {
+				/* unused */
+			};
+
+			reg_dc5ldo: dc5ldo {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpus-09-usbh";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-3v";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpua";
+			};
+
+			reg_dcdc4: dcdc4 {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-sys-usb0-hdmi";
+			};
+
+			reg_dcdc5: dcdc5 {
+				regulator-always-on;
+				regulator-min-microvolt = <1425000>;
+				regulator-max-microvolt = <1575000>;
+				regulator-name = "vcc-dram";
+			};
+
+			reg_dldo1: dldo1 {
+				/*
+				 * The WiFi chip supports a wide range
+				 * (3.0 ~ 4.8V) of voltages, and so does
+				 * this regulator (3.0 ~ 4.2V), but
+				 * Allwinner SDK always sets it to 3.3V.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi";
+			};
+
+			reg_dldo2: dldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pl";
+			};
+
+			reg_eldo1: eldo1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dvdd-cam";
+			};
+
+			reg_eldo2: eldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pe";
+			};
+
+			reg_eldo3: eldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pm-codec-io1";
+			};
+
+			reg_ldo_io0: ldo_io0 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pg";
+			};
+
+			reg_ldo_io1: ldo_io1 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-name = "vcc-pa-gmac-2v5";
+			};
+
+			reg_rtc_ldo: rtc_ldo {
+				regulator-name = "vcc-rtc-vdd1v8-io";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+
+	axp806: pmic@745 {
+		compatible = "x-powers,axp806";
+		reg = <0x745>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		bldoin-supply = <&reg_dcdce>;
+
+		regulators {
+			reg_s_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "avcc";
+			};
+
+			aldo2 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo2";
+			};
+
+			aldo3 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo3";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name = "vcc18-efuse-adc-display-csi";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name =
+					"vdd18-drampll-vcc18-pll-cpvdd";
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			reg_bldo4: bldo4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-name = "vcc12-hsic";
+			};
+
+			reg_cldo1: cldo1 {
+				/*
+				 * This was 3V in the original design, but
+				 * 3.3V is the recommended supply voltage
+				 * for the Ethernet PHY.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-gmac-phy";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "afvcc-cam";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-io-wifi-codec-io2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-vpu";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <2100000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-name = "vcc-bldo-codec-ldoin";
+			};
+
+			sw {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's sw
+				 */
+				regulator-name = "s_sw";
+			};
+		};
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&nmi_intc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
 };
 
+#include "axp809.dtsi"
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
diff --git a/src/arm/sun9i-a80-optimus.dts b/src/arm/sun9i-a80-optimus.dts
index d7a20d92b114..7e036b2be762 100644
--- a/src/arm/sun9i-a80-optimus.dts
+++ b/src/arm/sun9i-a80-optimus.dts
@@ -44,7 +44,6 @@
 
 /dts-v1/;
 #include "sun9i-a80.dtsi"
-#include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
@@ -85,6 +84,17 @@
 		};
 	};
 
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_vbus_pin_optimus>;
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	};
+
 	reg_usb3_vbus: usb3-vbus {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -95,6 +105,14 @@
 		enable-active-high;
 		gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
 	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+		/* enables internal regulator and de-asserts reset */
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+	};
 };
 
 &ehci0 {
@@ -102,13 +120,54 @@
 };
 
 &ehci1 {
-	status = "okay";
+	/* Enable if HSIC peripheral is connected */
+	status = "disabled";
 };
 
 &ehci2 {
 	status = "okay";
 };
 
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>, <&wifi_en_pin_optimus>;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_cldo3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc1_pins {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+};
+
 &ohci0 {
 	status = "okay";
 };
@@ -117,6 +176,11 @@
 	status = "okay";
 };
 
+&osc32k {
+	/* osc32k input is from AC100 */
+	clocks = <&ac100_rtc 0>;
+};
+
 &pio {
 	led_pins_optimus: led-pins@0 {
 		allwinner,pins = "PH0", "PH1";
@@ -147,37 +211,6 @@
 	};
 };
 
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>;
-	vmmc-supply = <&reg_vcc3v0>;
-	bus-width = <4>;
-	cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */
-	cd-inverted;
-	status = "okay";
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_8bit_pins>;
-	vmmc-supply = <&reg_vcc3v0>;
-	bus-width = <8>;
-	non-removable;
-	cap-mmc-hw-reset;
-	status = "okay";
-};
-
-&mmc2_8bit_pins {
-	/* Increase drive strength for DDR modes */
-	allwinner,drive = <SUN4I_PINCTRL_40_MA>;
-};
-
-&reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_optimus>;
-	gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	status = "okay";
-};
-
 &r_ir {
 	status = "okay";
 };
@@ -189,12 +222,286 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	wifi_en_pin_optimus: wifi_en_pin@0 {
+		allwinner,pins = "PL2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 };
 
 &r_rsb {
 	status = "okay";
+
+	axp809: pmic@3a3 {
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				/*
+				 * TODO: This should be handled by the
+				 * USB PHY driver.
+				 */
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc33-usbh";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pb-io-cam";
+			};
+
+			aldo3 {
+				/* unused */
+			};
+
+			reg_dc5ldo: dc5ldo {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpus-09-usbh";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-3v";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpua";
+			};
+
+			reg_dcdc4: dcdc4 {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-sys-usb0-hdmi";
+			};
+
+			reg_dcdc5: dcdc5 {
+				regulator-always-on;
+				regulator-min-microvolt = <1425000>;
+				regulator-max-microvolt = <1575000>;
+				regulator-name = "vcc-dram";
+			};
+
+			reg_dldo1: dldo1 {
+				/*
+				 * The WiFi chip supports a wide range
+				 * (3.0 ~ 4.8V) of voltages, and so does
+				 * this regulator (3.0 ~ 4.2V), but
+				 * Allwinner SDK always sets it to 3.3V.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi";
+			};
+
+			reg_dldo2: dldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pl";
+			};
+
+			reg_eldo1: eldo1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dvdd-cam";
+			};
+
+			reg_eldo2: eldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pe";
+			};
+
+			reg_eldo3: eldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pm-codec-io1";
+			};
+
+			reg_ldo_io0: ldo_io0 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pg";
+			};
+
+			reg_ldo_io1: ldo_io1 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-name = "vcc-pa-gmac-2v5";
+			};
+
+			reg_rtc_ldo: rtc_ldo {
+				regulator-name = "vcc-rtc-vdd1v8-io";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+
+	axp806: pmic@745 {
+		compatible = "x-powers,axp806";
+		reg = <0x745>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		bldoin-supply = <&reg_dcdce>;
+
+		regulators {
+			reg_s_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "avcc";
+			};
+
+			aldo2 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo2";
+			};
+
+			aldo3 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo3";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name = "vcc18-efuse-adc-display-csi";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name =
+					"vdd18-drampll-vcc18-pll-cpvdd";
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			reg_bldo4: bldo4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-name = "vcc12-hsic";
+			};
+
+			reg_cldo1: cldo1 {
+				/*
+				 * This was 3V in the original design, but
+				 * 3.3V is the recommended supply voltage
+				 * for the Ethernet PHY.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-gmac-phy";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "afvcc-cam";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-io-wifi-codec-io2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-vpu";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <2100000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-name = "vcc-bldo-codec-ldoin";
+			};
+
+			sw {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's sw
+				 */
+				regulator-name = "s_sw";
+			};
+		};
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&nmi_intc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
 };
 
+#include "axp809.dtsi"
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
@@ -207,7 +514,9 @@
 };
 
 &usbphy2 {
-	status = "okay";
+	phy-supply = <&reg_bldo4>;
+	/* Enable if HSIC peripheral is connected */
+	status = "disabled";
 };
 
 &usbphy3 {
diff --git a/src/arm/sun9i-a80.dtsi b/src/arm/sun9i-a80.dtsi
index f68b3242b33a..979ad1aacfb1 100644
--- a/src/arm/sun9i-a80.dtsi
+++ b/src/arm/sun9i-a80.dtsi
@@ -148,15 +148,14 @@
 
 		/*
 		 * The 32k clock is from an external source, normally the
-		 * AC100 codec/RTC chip. This clock is by default enabled
-		 * and clocked at 32768 Hz, from the oscillator connected
-		 * to the AC100. It is configurable, but no such driver or
-		 * bindings exist yet.
+		 * AC100 codec/RTC chip. This serves as a placeholder for
+		 * board dts files to specify the source.
 		 */
 		osc32k: osc32k_clk {
 			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
+			compatible = "fixed-factor-clock";
+			clock-div = <1>;
+			clock-mult = <1>;
 			clock-output-names = "osc32k";
 		};
 
@@ -679,7 +678,8 @@
 				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 5>;
+			clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -701,6 +701,14 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			mmc1_pins: mmc1 {
+				allwinner,pins = "PG0", "PG1" ,"PG2", "PG3",
+						 "PG4", "PG5";
+				allwinner,function = "mmc1";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			mmc2_8bit_pins: mmc2_8bit {
 				allwinner,pins = "PC6", "PC7", "PC8", "PC9",
 						 "PC10", "PC11", "PC12",
@@ -895,12 +903,12 @@
 			reg = <0x08002c00 0x400>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apbs_gates 0>;
+			clocks = <&apbs_gates 0>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
 			resets = <&apbs_rst 0>;
 			gpio-controller;
 			interrupt-controller;
-			#address-cells = <1>;
-			#size-cells = <0>;
+			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
 			r_ir_pins: r_ir {
diff --git a/src/arm/sunxi-reference-design-tablet.dtsi b/src/arm/sunxi-reference-design-tablet.dtsi
new file mode 100644
index 000000000000..b8241462fcea
--- /dev/null
+++ b/src/arm/sunxi-reference-design-tablet.dtsi
@@ -0,0 +1,83 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sunxi-common-regulators.dtsi"
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins>;
+	status = "okay";
+};
diff --git a/src/arm/tegra114-dalmore.dts b/src/arm/tegra114-dalmore.dts
index c970bf65c74c..1444fbd543e7 100644
--- a/src/arm/tegra114-dalmore.dts
+++ b/src/arm/tegra114-dalmore.dts
@@ -897,7 +897,7 @@
 		palmas: tps65913@58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			#interrupt-cells = <2>;
 			interrupt-controller;
@@ -1149,7 +1149,7 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
diff --git a/src/arm/tegra114-roth.dts b/src/arm/tegra114-roth.dts
index 9d868af97b8e..966a7fc044af 100644
--- a/src/arm/tegra114-roth.dts
+++ b/src/arm/tegra114-roth.dts
@@ -802,7 +802,7 @@
 		palmas: pmic@58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			#interrupt-cells = <2>;
 			interrupt-controller;
@@ -1020,9 +1020,9 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		clk32k_in: clock {
+		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
diff --git a/src/arm/tegra114-tn7.dts b/src/arm/tegra114-tn7.dts
index 89047edb5c5f..a161fa1dfb61 100644
--- a/src/arm/tegra114-tn7.dts
+++ b/src/arm/tegra114-tn7.dts
@@ -63,7 +63,7 @@
 		palmas: pmic@58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			#interrupt-cells = <2>;
 			interrupt-controller;
@@ -277,7 +277,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		clk32k_in: clock {
+		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
 			reg = <0>;
 			#clock-cells = <0>;
diff --git a/src/arm/tegra114.dtsi b/src/arm/tegra114.dtsi
index cb9393a53422..8932ea3afd5f 100644
--- a/src/arm/tegra114.dtsi
+++ b/src/arm/tegra114.dtsi
@@ -672,7 +672,7 @@
 	};
 
 	usb@7d000000 {
-		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci", "usb-ehci";
 		reg = <0x7d000000 0x4000>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
@@ -684,7 +684,7 @@
 	};
 
 	phy1: usb-phy@7d000000 {
-		compatible = "nvidia,tegra30-usb-phy";
+		compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA114_CLK_USBD>,
@@ -708,7 +708,7 @@
 	};
 
 	usb@7d008000 {
-		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci", "usb-ehci";
 		reg = <0x7d008000 0x4000>;
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
@@ -720,7 +720,7 @@
 	};
 
 	phy3: usb-phy@7d008000 {
-		compatible = "nvidia,tegra30-usb-phy";
+		compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA114_CLK_USB3>,
diff --git a/src/arm/tegra124-apalis-emc.dtsi b/src/arm/tegra124-apalis-emc.dtsi
new file mode 100644
index 000000000000..ca2c3a557895
--- /dev/null
+++ b/src/arm/tegra124-apalis-emc.dtsi
@@ -0,0 +1,1502 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	clock@60006000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-20400000 {
+				clock-frequency = <20400000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-40800000 {
+				clock-frequency = <40800000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-68000000 {
+				clock-frequency = <68000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-300000000 {
+				clock-frequency = <300000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
+				clock-names = "emc-parent";
+			};
+			timing-396000000 {
+				clock-frequency = <396000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
+				clock-names = "emc-parent";
+			};
+			timing-528000000 {
+				clock-frequency = <528000000>;
+				nvidia,parent-clock-frequency = <528000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+			timing-600000000 {
+				clock-frequency = <600000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
+				clock-names = "emc-parent";
+			};
+			timing-792000000 {
+				clock-frequency = <792000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+			timing-924000000 {
+				clock-frequency = <924000000>;
+				nvidia,parent-clock-frequency = <924000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+		};
+	};
+
+	emc@7001b000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000 0x00000003
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000a 0x00000005
+					0x0000000b 0x00000000
+					0x00000000 0x00000003
+					0x00000003 0x00000000
+					0x00000006 0x00000006
+					0x00000006 0x00000002
+					0x00000000 0x00000005
+					0x00000005 0x00010000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000c 0x0000000d
+					0x0000000f 0x00000060
+					0x00000000 0x00000018
+					0x00000002 0x00000002
+					0x00000001 0x00000000
+					0x00000007 0x0000000f
+					0x00000005 0x00000005
+					0x00000004 0x00000005
+					0x00000004 0x00000000
+					0x00000000 0x00000005
+					0x00000005 0x00000064
+					0x00000000 0x00000000
+					0x00000000 0x106aa298
+					0x002c00a0 0x00008000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x000fc000 0x000fc000
+					0x000fc000 0x000fc000
+					0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000e0e 0x81f1f108
+					0x07070004 0x0000003f
+					0x016eeeee 0x51451400
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x00000007 0x00000000
+					0x00000042 0x000e000e
+					0x00000000 0x00000003
+					0x0000f2f3 0x800001c5
+					0x0000000a
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000 0x00000005
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000a 0x00000005
+					0x0000000b 0x00000000
+					0x00000000 0x00000003
+					0x00000003 0x00000000
+					0x00000006 0x00000006
+					0x00000006 0x00000002
+					0x00000000 0x00000005
+					0x00000005 0x00010000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000c 0x0000000d
+					0x0000000f 0x0000009a
+					0x00000000 0x00000026
+					0x00000002 0x00000002
+					0x00000001 0x00000000
+					0x00000007 0x0000000f
+					0x00000006 0x00000006
+					0x00000004 0x00000005
+					0x00000004 0x00000000
+					0x00000000 0x00000005
+					0x00000005 0x000000a0
+					0x00000000 0x00000000
+					0x00000000 0x106aa298
+					0x002c00a0 0x00008000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x000fc000 0x000fc000
+					0x000fc000 0x000fc000
+					0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000e0e 0x81f1f108
+					0x07070004 0x0000003f
+					0x016eeeee 0x51451400
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x0000000b 0x00000000
+					0x00000042 0x000e000e
+					0x00000000 0x00000003
+					0x0000f2f3 0x8000023a
+					0x0000000a
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000001 0x0000000a
+					0x00000000 0x00000001
+					0x00000000 0x00000004
+					0x0000000a 0x00000005
+					0x0000000b 0x00000000
+					0x00000000 0x00000003
+					0x00000003 0x00000000
+					0x00000006 0x00000006
+					0x00000006 0x00000002
+					0x00000000 0x00000005
+					0x00000005 0x00010000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000c 0x0000000d
+					0x0000000f 0x00000134
+					0x00000000 0x0000004d
+					0x00000002 0x00000002
+					0x00000001 0x00000000
+					0x00000008 0x0000000f
+					0x0000000c 0x0000000c
+					0x00000004 0x00000005
+					0x00000004 0x00000000
+					0x00000000 0x00000005
+					0x00000005 0x0000013f
+					0x00000000 0x00000000
+					0x00000000 0x106aa298
+					0x002c00a0 0x00008000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x000fc000 0x000fc000
+					0x000fc000 0x000fc000
+					0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000e0e 0x81f1f108
+					0x07070004 0x0000003f
+					0x016eeeee 0x51451400
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x00000015 0x00000000
+					0x00000042 0x000e000e
+					0x00000000 0x00000003
+					0x0000f2f3 0x80000370
+					0x0000000a
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000003 0x00000011
+					0x00000000 0x00000002
+					0x00000000 0x00000004
+					0x0000000a 0x00000005
+					0x0000000b 0x00000000
+					0x00000000 0x00000003
+					0x00000003 0x00000000
+					0x00000006 0x00000006
+					0x00000006 0x00000002
+					0x00000000 0x00000005
+					0x00000005 0x00010000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000c 0x0000000d
+					0x0000000f 0x00000202
+					0x00000000 0x00000080
+					0x00000002 0x00000002
+					0x00000001 0x00000000
+					0x0000000f 0x0000000f
+					0x00000013 0x00000013
+					0x00000004 0x00000005
+					0x00000004 0x00000001
+					0x00000000 0x00000005
+					0x00000005 0x00000213
+					0x00000000 0x00000000
+					0x00000000 0x106aa298
+					0x002c00a0 0x00008000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x000fc000 0x000fc000
+					0x000fc000 0x000fc000
+					0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000e0e 0x81f1f108
+					0x07070004 0x0000003f
+					0x016eeeee 0x51451400
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x00000022 0x00000000
+					0x00000042 0x000e000e
+					0x00000000 0x00000003
+					0x0000f2f3 0x8000050e
+					0x0000000a
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000004 0x0000001a
+					0x00000000 0x00000003
+					0x00000001 0x00000004
+					0x0000000a 0x00000005
+					0x0000000b 0x00000001
+					0x00000001 0x00000003
+					0x00000003 0x00000000
+					0x00000006 0x00000006
+					0x00000006 0x00000002
+					0x00000000 0x00000005
+					0x00000005 0x00010000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000c 0x0000000d
+					0x0000000f 0x00000304
+					0x00000000 0x000000c1
+					0x00000002 0x00000002
+					0x00000001 0x00000000
+					0x00000018 0x0000000f
+					0x0000001c 0x0000001c
+					0x00000004 0x00000005
+					0x00000004 0x00000002
+					0x00000000 0x00000005
+					0x00000005 0x0000031c
+					0x00000000 0x00000000
+					0x00000000 0x106aa298
+					0x002c00a0 0x00008000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x000fc000 0x000fc000
+					0x000fc000 0x000fc000
+					0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000e0e 0x81f1f108
+					0x07070004 0x0000003f
+					0x016eeeee 0x51451400
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x00000033 0x00000000
+					0x00000042 0x000e000e
+					0x00000000 0x00000003
+					0x0000f2f3 0x80000713
+					0x0000000a
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008cd>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000009 0x00000035
+					0x00000000 0x00000006
+					0x00000002 0x00000005
+					0x0000000a 0x00000005
+					0x0000000b 0x00000002
+					0x00000002 0x00000003
+					0x00000003 0x00000000
+					0x00000005 0x00000005
+					0x00000006 0x00000002
+					0x00000000 0x00000004
+					0x00000006 0x00010000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000003
+					0x0000000d 0x0000000f
+					0x00000011 0x00000607
+					0x00000000 0x00000181
+					0x00000002 0x00000002
+					0x00000001 0x00000000
+					0x00000032 0x0000000f
+					0x00000038 0x00000038
+					0x00000004 0x00000005
+					0x00000004 0x00000006
+					0x00000000 0x00000005
+					0x00000005 0x00000638
+					0x00000000 0x00000000
+					0x00000000 0x106aa298
+					0x002c00a0 0x00008000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00008000 0x00000000
+					0x00000000 0x00008000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00090000 0x00090000
+					0x00090000 0x00090000
+					0x00009000 0x00009000
+					0x00009000 0x00009000
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000707 0x81f1f108
+					0x07070004 0x0000003f
+					0x016eeeee 0x51451400
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x00000066 0x00000000
+					0x00000100 0x000e000e
+					0x00000000 0x00000003
+					0x0000d2b3 0x80000d22
+					0x0000000a
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x000008d5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-mrs-wait-cnt = <0x0173000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000000d 0x0000004d
+					0x00000000 0x00000009
+					0x00000003 0x00000004
+					0x00000008 0x00000002
+					0x00000009 0x00000003
+					0x00000003 0x00000002
+					0x00000002 0x00000000
+					0x00000003 0x00000003
+					0x00000005 0x00000002
+					0x00000000 0x00000002
+					0x00000007 0x00020000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000001
+					0x0000000e 0x00000010
+					0x00000012 0x000008e4
+					0x00000000 0x00000239
+					0x00000001 0x00000008
+					0x00000001 0x00000000
+					0x0000004b 0x0000000e
+					0x00000052 0x00000200
+					0x00000004 0x00000005
+					0x00000004 0x00000008
+					0x00000000 0x00000005
+					0x00000005 0x00000924
+					0x00000000 0x00000000
+					0x00000000 0x104ab098
+					0x002c00a0 0x00008000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00098000 0x00098000
+					0x00000000 0x00098000
+					0x00098000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00050000 0x00050000
+					0x00050000 0x00050000
+					0x00005000 0x00005000
+					0x00005000 0x00005000
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000505 0x81f1f108
+					0x07070004 0x00000000
+					0x016eeeee 0x51451420
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x00000096 0x00000000
+					0x00000100 0x0173000e
+					0x00000000 0x00000003
+					0x000052a3 0x800012d7
+					0x00000009
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x00000895>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-mrs-wait-cnt = <0x015b000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000011 0x00000066
+					0x00000000 0x0000000c
+					0x00000004 0x00000004
+					0x00000008 0x00000002
+					0x0000000a 0x00000004
+					0x00000004 0x00000002
+					0x00000002 0x00000000
+					0x00000003 0x00000003
+					0x00000005 0x00000002
+					0x00000000 0x00000001
+					0x00000008 0x00020000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x0000000f 0x00000010
+					0x00000012 0x00000bd1
+					0x00000000 0x000002f4
+					0x00000001 0x00000008
+					0x00000001 0x00000000
+					0x00000063 0x0000000f
+					0x0000006c 0x00000200
+					0x00000004 0x00000005
+					0x00000004 0x0000000b
+					0x00000000 0x00000005
+					0x00000005 0x00000c11
+					0x00000000 0x00000000
+					0x00000000 0x104ab098
+					0x002c00a0 0x00008000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00070000 0x00070000
+					0x00000000 0x00070000
+					0x00070000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00038000 0x00038000
+					0x00038000 0x00038000
+					0x00003800 0x00003800
+					0x00003800 0x00003800
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000505 0x81f1f108
+					0x07070004 0x00000000
+					0x016eeeee 0x51451420
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x000000c6 0x00000000
+					0x00000100 0x015b000e
+					0x00000000 0x00000003
+					0x000052a3 0x8000188b
+					0x00000009
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000941>;
+				nvidia,emc-mrs-wait-cnt = <0x0139000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0123133d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000018 0x00000088
+					0x00000000 0x00000010
+					0x00000006 0x00000006
+					0x00000009 0x00000002
+					0x0000000d 0x00000006
+					0x00000006 0x00000002
+					0x00000002 0x00000000
+					0x00000003 0x00000003
+					0x00000006 0x00000002
+					0x00000000 0x00000001
+					0x00000009 0x00030000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000010 0x00000012
+					0x00000014 0x00000fd6
+					0x00000000 0x000003f5
+					0x00000002 0x0000000b
+					0x00000001 0x00000000
+					0x00000085 0x00000012
+					0x00000090 0x00000200
+					0x00000004 0x00000005
+					0x00000004 0x00000010
+					0x00000000 0x00000006
+					0x00000006 0x00001017
+					0x00000000 0x00000000
+					0x00000000 0x104ab098
+					0xe01200b1 0x00008000
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00054000 0x00054000
+					0x00000000 0x00054000
+					0x00054000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x0000000c 0x0000000c
+					0x0000000c 0x0000000c
+					0x0000000c 0x0000000c
+					0x0000000c 0x0000000c
+					0x100002a0 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc085
+					0x00000505 0x81f1f108
+					0x07070004 0x00000000
+					0x016eeeee 0x51451420
+					0x00514514 0x00514514
+					0x51451400 0x0606003f
+					0x00000000 0x00000000
+					0x00000100 0x0139000e
+					0x00000000 0x00000003
+					0x000042a0 0x80002062
+					0x0000000a
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200010>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000b61>;
+				nvidia,emc-mrs-wait-cnt = <0x0127000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0121113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000001b 0x0000009b
+					0x00000000 0x00000013
+					0x00000007 0x00000007
+					0x0000000b 0x00000003
+					0x00000010 0x00000007
+					0x00000007 0x00000002
+					0x00000002 0x00000000
+					0x00000005 0x00000005
+					0x0000000a 0x00000002
+					0x00000000 0x00000003
+					0x0000000b 0x00070000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000002
+					0x00000012 0x00000016
+					0x00000018 0x00001208
+					0x00000000 0x00000482
+					0x00000002 0x0000000d
+					0x00000001 0x00000000
+					0x00000097 0x00000015
+					0x000000a3 0x00000200
+					0x00000004 0x00000005
+					0x00000004 0x00000013
+					0x00000000 0x00000006
+					0x00000006 0x00001248
+					0x00000000 0x00000000
+					0x00000000 0x104ab098
+					0xe00e00b1 0x00008000
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00048000 0x00048000
+					0x00000000 0x00048000
+					0x00048000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x0000000d 0x0000000d
+					0x0000000d 0x0000000d
+					0x0000000d 0x0000000d
+					0x0000000d 0x0000000d
+					0x100002a0 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc085
+					0x00000505 0x81f1f108
+					0x07070004 0x00000000
+					0x016eeeee 0x51451420
+					0x00514514 0x00514514
+					0x51451400 0x0606003f
+					0x00000000 0x00000000
+					0x00000100 0x0127000e
+					0x00000000 0x00000003
+					0x000040a0 0x800024aa
+					0x0000000e
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-mrs-wait-cnt = <0x00f7000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040000>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0120113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000024 0x000000cd
+					0x00000000 0x00000019
+					0x0000000a 0x00000008
+					0x0000000d 0x00000004
+					0x00000013 0x0000000a
+					0x0000000a 0x00000004
+					0x00000002 0x00000000
+					0x00000006 0x00000006
+					0x0000000b 0x00000002
+					0x00000000 0x00000002
+					0x0000000d 0x00080000
+					0x00000004 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000001
+					0x00000014 0x00000018
+					0x0000001a 0x000017e2
+					0x00000000 0x000005f8
+					0x00000003 0x00000011
+					0x00000001 0x00000000
+					0x000000c7 0x00000018
+					0x000000d7 0x00000200
+					0x00000005 0x00000006
+					0x00000005 0x00000019
+					0x00000000 0x00000008
+					0x00000008 0x00001822
+					0x00000000 0x00000000
+					0x00000000 0x104ab098
+					0xe00700b1 0x00008000
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00034000 0x00034000
+					0x00000000 0x00034000
+					0x00034000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x100002a0 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc085
+					0x00000000 0x81f1f108
+					0x07070004 0x00000000
+					0x016eeeee 0x61861820
+					0x00514514 0x00514514
+					0x61861800 0x0606003f
+					0x00000000 0x00000000
+					0x00000100 0x00f7000e
+					0x00000000 0x00000004
+					0x00004080 0x80003012
+					0x0000000f
+				>;
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430303>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200020>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000f15>;
+				nvidia,emc-mrs-wait-cnt = <0x00cd000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040000>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0120113d>;
+				nvidia,emc-zcal-cnt-long = <0x0000004c>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000002b 0x000000f0
+					0x00000000 0x0000001e
+					0x0000000b 0x00000009
+					0x0000000f 0x00000005
+					0x00000016 0x0000000b
+					0x0000000b 0x00000004
+					0x00000002 0x00000000
+					0x00000007 0x00000007
+					0x0000000d 0x00000002
+					0x00000000 0x00000002
+					0x0000000f 0x000a0000
+					0x00000004 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000001
+					0x00000016 0x0000001a
+					0x0000001c 0x00001be7
+					0x00000000 0x000006f9
+					0x00000004 0x00000015
+					0x00000001 0x00000000
+					0x000000e7 0x0000001b
+					0x000000fb 0x00000200
+					0x00000006 0x00000007
+					0x00000006 0x0000001e
+					0x00000000 0x0000000a
+					0x0000000a 0x00001c28
+					0x00000000 0x00000000
+					0x00000000 0x104ab898
+					0xe00400b1 0x00008000
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x0002c000 0x0002c000
+					0x00000000 0x0002c000
+					0x0002c000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000008 0x00000008
+					0x00000008 0x00000008
+					0x00000008 0x00000008
+					0x00000008 0x00000008
+					0x100002a0 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc085
+					0x00000000 0x81f1f108
+					0x07070004 0x00000000
+					0x016eeeee 0x5d75d720
+					0x00514514 0x00514514
+					0x5d75d700 0x0606003f
+					0x00000000 0x00000000
+					0x00000128 0x00cd000e
+					0x00000000 0x00000004
+					0x00004080 0x800037ea
+					0x00000011
+				>;
+			};
+
+		};
+	};
+
+	memory-controller@70019000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 0x8000000a
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x77e30303 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001 0x80000012
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x76230303 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001 0x80000017
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x74a30303 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 0x8000001e
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x74230403 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001 0x80000026
+					0x00000001 0x00000001
+					0x00000003 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0503
+					0x73c30504 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003 0x80000040
+					0x00000001 0x00000001
+					0x00000004 0x00000002
+					0x00000003 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000004 0x00000006
+					0x06040203 0x000a0504
+					0x73840a05 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004 0x80000040
+					0x00000001 0x00000002
+					0x00000007 0x00000004
+					0x00000004 0x00000001
+					0x00000002 0x00000007
+					0x00000002 0x00000002
+					0x00000004 0x00000006
+					0x06040202 0x000b0607
+					0x77450e08 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005 0x80000040
+					0x00000001 0x00000002
+					0x00000009 0x00000005
+					0x00000006 0x00000001
+					0x00000002 0x00000008
+					0x00000002 0x00000002
+					0x00000004 0x00000006
+					0x06040202 0x000d0709
+					0x7586120a 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007 0x80000040
+					0x00000002 0x00000003
+					0x0000000c 0x00000007
+					0x00000008 0x00000001
+					0x00000002 0x00000009
+					0x00000002 0x00000002
+					0x00000005 0x00000006
+					0x06050202 0x0010090c
+					0x7428180d 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009 0x80000040
+					0x00000003 0x00000004
+					0x0000000e 0x00000009
+					0x0000000a 0x00000001
+					0x00000003 0x0000000b
+					0x00000002 0x00000002
+					0x00000005 0x00000007
+					0x07050202 0x00130b0e
+					0x73a91b0f 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b 0x80000040
+					0x00000004 0x00000005
+					0x00000013 0x0000000c
+					0x0000000d 0x00000002
+					0x00000003 0x0000000c
+					0x00000002 0x00000002
+					0x00000006 0x00000008
+					0x08060202 0x00170e13
+					0x736c2414 0x70000f02
+					0x001f0000
+				>;
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000d 0x80000040
+					0x00000005 0x00000006
+					0x00000016 0x0000000e
+					0x0000000f 0x00000002
+					0x00000004 0x0000000e
+					0x00000002 0x00000002
+					0x00000006 0x00000009
+					0x09060202 0x001a1016
+					0x734e2a17 0x70000f02
+					0x001f0000
+				>;
+			};
+		};
+	};
+};
diff --git a/src/arm/tegra124-apalis-eval.dts b/src/arm/tegra124-apalis-eval.dts
new file mode 100644
index 000000000000..653044a44f0d
--- /dev/null
+++ b/src/arm/tegra124-apalis-eval.dts
@@ -0,0 +1,284 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra124-apalis.dtsi"
+
+/ {
+	model = "Toradex Apalis TK1 on Apalis Evaluation Board";
+	compatible = "toradex,apalis-tk1-eval", "toradex,apalis-tk1",
+		     "nvidia,tegra124";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/pmic@40";
+		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartc;
+		serial3 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pcie-controller@01003000 {
+		pci@1,0 {
+			status = "okay";
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+		};
+	};
+
+	/* Apalis UART1 */
+	serial@70006000 {
+		status = "okay";
+	};
+
+	/* Apalis UART2 */
+	serial@70006040 {
+		status = "okay";
+	};
+
+	/* Apalis UART3 */
+	serial@70006200 {
+		status = "okay";
+	};
+
+	/* Apalis UART4 */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		pcie-switch@58 {
+			compatible = "plx,pex8605";
+			reg = <0x58>;
+		};
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "st,m41t00";
+			reg = <0x68>;
+		};
+	};
+
+	/*
+	 * GEN2_I2C: I2C2_SDA/SCL (DDC) on MXM3 pin 205/207 (e.g. display EDID)
+	 */
+	hdmi_ddc: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/*
+	 * CAM_I2C: I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor
+	 * on carrier board)
+	 */
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* I2C4 (DDC): unused */
+
+	/* SPI1: Apalis SPI1 */
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <50000000>;
+
+		spidev0: spidev@0 {
+			compatible = "spidev";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+		};
+	};
+
+	/* SPI4: Apalis SPI2 */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <50000000>;
+
+		spidev1: spidev@0 {
+			compatible = "spidev";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+		};
+	};
+
+	/* Apalis Serial ATA */
+	sata@70020000 {
+		status = "okay";
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	usb@70090000 {
+		status = "okay";
+	};
+
+	/* Apalis MMC1 */
+	sdhci@700b0000 {
+		status = "okay";
+		/* MMC1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+		vqmmc-supply = <&vddio_sdmmc1>;
+	};
+
+	/* Apalis SD1 */
+	sdhci@700b0400 {
+		status = "okay";
+		/*
+		 * Don't use SD1_CD# aka SDMMC3_CLK_LB_OUT for now as it
+		 * features some magic properties even though the external
+		 * loopback is disabled and the internal loopback used as per
+		 * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits being
+		 * set to 0xfffd according to the TRM!
+		 * cd-gpios = <&gpio TEGRA_GPIO(EE, 4) GPIO_ACTIVE_LOW>;
+		 */
+		bus-width = <4>;
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		vbus-supply = <&reg_usbo1_vbus>;
+	};
+
+	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH4_DP/N */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		/* BKL1_PWM */
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <255 231 223 207 191 159 127 0>;
+		default-brightness-level = <6>;
+		/* BKL1_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		wakeup {
+			label = "WAKE1_MICO";
+			gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	/* USBO1_EN */
+	reg_usbo1_vbus: regulator-usbo1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBO1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/* USBH_EN */
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+};
diff --git a/src/arm/tegra124-apalis.dtsi b/src/arm/tegra124-apalis.dtsi
new file mode 100644
index 000000000000..0819721dda59
--- /dev/null
+++ b/src/arm/tegra124-apalis.dtsi
@@ -0,0 +1,2100 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "tegra124.dtsi"
+#include "tegra124-apalis-emc.dtsi"
+
+/*
+ * Toradex Apalis TK1 Module Device Tree
+ * Compatible for Revisions 2GB: V1.0A
+ */
+/ {
+	model = "Toradex Apalis TK1";
+	compatible = "toradex,apalis-tk1", "nvidia,tegra124";
+
+	memory {
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	pcie-controller@01003000 {
+		status = "okay";
+
+		avddio-pex-supply = <&vdd_1v05>;
+		avdd-pex-pll-supply = <&vdd_1v05>;
+		avdd-pll-erefe-supply = <&avdd_1v05>;
+		dvddio-pex-supply = <&vdd_1v05>;
+		hvdd-pex-pll-e-supply = <&reg_3v3>;
+		hvdd-pex-supply = <&reg_3v3>;
+		vddio-pex-ctl-supply = <&reg_3v3>;
+
+		/* Apalis PCIe (additional lane Apalis type specific) */
+		pci@1,0 {
+			/* PCIE1_RX/TX and TS_DIFF1/2 */
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>;
+			phy-names = "pcie-0", "pcie-1";
+		};
+
+		/* I210 Gigabit Ethernet Controller (On-module) */
+		pci@2,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
+			phy-names = "pcie-0";
+			status = "okay";
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			pll-supply = <&reg_1v05_avdd_hdmi_pll>;
+			vdd-supply = <&reg_3v3_avdd_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpu@0,57000000 {
+		/*
+		 * Node left disabled on purpose - the bootloader will enable
+		 * it after having set the VPR up
+		 */
+		vdd-supply = <&vdd_gpu>;
+	};
+
+	pinmux: pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* Analogue Audio (On-module) */
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_sclk_pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap_mclk1_pw4 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_ON */
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_PWM */
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis CAM1_MCLK */
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis Digital Audio */
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_sclk_pa3 {
+				nvidia,pins = "dap2_sclk_pa3";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb3 { /* DAP1_RESET */
+				nvidia,pins = "pbb3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis GPIO */
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ddc_sda_pv5 {
+				nvidia,pins = "ddc_sda_pv5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l0_rst_n_pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l0_clkreq_n_pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_rst_n_pdd5 {
+				nvidia,pins = "pex_l1_rst_n_pdd5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_clkreq_n_pdd6 {
+				nvidia,pins = "pex_l1_clkreq_n_pdd6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dp_hpd_pff0 {
+				nvidia,pins = "dp_hpd_pff0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pff2 {
+				nvidia,pins = "pff2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			owr { /* PEX_L1_CLKREQ_N multiplexed GPIO6 */
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis HDMI1_CEC */
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis HDMI1_HPD */
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis I2C1 */
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_sda_pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C2 (DDC) */
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C3 (CAM) */
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			cam_i2c_sda_pbb2 {
+				nvidia,pins = "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis MMC1 */
+			sdmmc1_cd_n_pv3 { /* CD# GPIO */
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_out_pw5 { /* D5 GPIO */
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat2_py5 {
+				nvidia,pins = "sdmmc1_dat2_py5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat1_py6 {
+				nvidia,pins = "sdmmc1_dat1_py6";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat0_py7 {
+				nvidia,pins = "sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_req_pcc5 { /* D4 GPIO */
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/*
+			 * Don't use MMC1_D6 aka SDMMC3_CLK_LB_IN for now as it
+			 * features some magic properties even though the
+			 * external loopback is disabled and the internal
+			 * loopback used as per SDMMC_VENDOR_MISC_CNTRL_0
+			 * register's SDMMC_SPARE1 bits being set to 0xfffd
+			 * according to the TRM!
+			 */
+			sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */
+				nvidia,pins = "sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en2_pff1 { /* D7 GPIO */
+				nvidia,pins = "usb_vbus_en2_pff1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis PWM */
+			ph0 {
+				nvidia,pins = "ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph1 {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph2 {
+				nvidia,pins = "ph2";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* PWM3 active on pu6 being Apalis BKL1_PWM */
+			ph3 {
+				nvidia,pins = "ph3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SATA1_ACT# */
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SD1 */
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat3_pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat2_pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat1_pb6 {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat0_pb7 {
+				nvidia,pins = "sdmmc3_dat0_pb7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/*
+			 * Don't use SD1_CD# aka SDMMC3_CLK_LB_OUT for now as it
+			 * features some magic properties even though the
+			 * external loopback is disabled and the internal
+			 * loopback used as per SDMMC_VENDOR_MISC_CNTRL_0
+			 * register's SDMMC_SPARE1 bits being set to 0xfffd
+			 * according to the TRM!
+			 */
+			sdmmc3_clk_lb_out_pee4 { /* CD# GPIO */
+				nvidia,pins = "sdmmc3_clk_lb_out_pee4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SPDIF */
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPI1 */
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SPI2 */
+			pg5 {
+				nvidia,pins = "pg5";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg6 {
+				nvidia,pins = "pg6";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg7 {
+				nvidia,pins = "pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi3 {
+				nvidia,pins = "pi3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART1 */
+			pb1 { /* DCD GPIO */
+				nvidia,pins = "pb1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk7 { /* RI GPIO */
+				nvidia,pins = "pk7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart1_txd_pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rxd_pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart1_cts_n_pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart1_rts_n_pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_n_pa1 { /* DSR GPIO */
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 { /* DTR GPIO */
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART2 */
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART3 */
+			uart3_txd_pw6 {
+				nvidia,pins = "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rxd_pw7 {
+				nvidia,pins = "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis UART4 */
+			uart4_rxd_pb0 {
+				nvidia,pins = "pb0";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart4_txd_pj7 {
+				nvidia,pins = "pj7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_EN */
+			usb_vbus_en1_pn5 {
+				nvidia,pins = "usb_vbus_en1_pn5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_OC# */
+			pbb0 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis USBO1_EN */
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBO1_OC# */
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis WAKE1_MICO */
+			pex_wake_n_pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* CORE_PWR_REQ */
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* CPU_PWR_REQ */
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* DVFS */
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_clk_px2 {
+				nvidia,pins = "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* eMMC */
+			sdmmc4_dat0_paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat1_paa1 {
+				nvidia,pins = "sdmmc4_dat1_paa1";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat2_paa2 {
+				nvidia,pins = "sdmmc4_dat2_paa2";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat3_paa3 {
+				nvidia,pins = "sdmmc4_dat3_paa3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat4_paa4 {
+				nvidia,pins = "sdmmc4_dat4_paa4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat5_paa5 {
+				nvidia,pins = "sdmmc4_dat5_paa5";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat6_paa6 {
+				nvidia,pins = "sdmmc4_dat6_paa6";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat7_paa7 {
+				nvidia,pins = "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* JTAG_RTCK */
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LAN_DEV_OFF# */
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LAN_RESET# */
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LAN_WAKE# */
+			ulpi_data4_po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT1# */
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT2# */
+			pj2 {
+				nvidia,pins = "pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT3# */
+			pi5 {
+				nvidia,pins = "pi5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT4# */
+			pj0 {
+				nvidia,pins = "pj0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_RESET */
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* MCU SPI */
+			gpio_x4_aud_px4 {
+				nvidia,pins = "gpio_x4_aud_px4";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x5_aud_px5 {
+				nvidia,pins = "gpio_x5_aud_px5";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x6_aud_px6 { /* MCU_CS */
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x7_aud_px7 {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w2_aud_pw2 { /* MCU_CSEZP */
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* PMIC_CLK_32K */
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PMIC_CPU_OC_INT */
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PWR_I2C */
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_i2c_sda_pz7 {
+				nvidia,pins = "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PWR_INT_N */
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* RESET_MOCI_CTRL */
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* RESET_OUT_N */
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SHIFT_CTRL_DIR_IN */
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row1_pr1 {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Configure level-shifter as output for HDA */
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* SHIFT_CTRL_DIR_OUT */
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col7_pq7 {
+				nvidia,pins = "kb_col7_pq7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* SHIFT_CTRL_OE */
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col1_pq1 {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col2_pq2 {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row2_pr2 {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* GPIO_PI6 aka TEMP_ALERT_L */
+			pi6 {
+				nvidia,pins = "pi6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* TOUCH_INT */
+			gpio_w3_aud_pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pc7 { /* NC */
+				nvidia,pins = "pc7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg0 { /* NC */
+				nvidia,pins = "pg0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg1 { /* NC */
+				nvidia,pins = "pg1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg2 { /* NC */
+				nvidia,pins = "pg2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg3 { /* NC */
+				nvidia,pins = "pg3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg4 { /* NC */
+				nvidia,pins = "pg4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph4 { /* NC */
+				nvidia,pins = "ph4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph5 { /* NC */
+				nvidia,pins = "ph5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 { /* NC */
+				nvidia,pins = "ph6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph7 { /* NC */
+				nvidia,pins = "ph7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi0 { /* NC */
+				nvidia,pins = "pi0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi1 { /* NC */
+				nvidia,pins = "pi1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi2 { /* NC */
+				nvidia,pins = "pi2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi4 { /* NC */
+				nvidia,pins = "pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi7 { /* NC */
+				nvidia,pins = "pi7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 { /* NC */
+				nvidia,pins = "pk0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 { /* NC */
+				nvidia,pins = "pk1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk3 { /* NC */
+				nvidia,pins = "pk3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 { /* NC */
+				nvidia,pins = "pk4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_fs_pn0 { /* NC */
+				nvidia,pins = "dap1_fs_pn0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pn1 { /* NC */
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pn3 { /* NC */
+				nvidia,pins = "dap1_sclk_pn3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data7_po0 { /* NC */
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data0_po1 { /* NC */
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data1_po2 { /* NC */
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data2_po3 { /* NC */
+				nvidia,pins = "ulpi_data2_po3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data3_po4 { /* NC */
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data6_po7 { /* NC */
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_fs_pp4 { /* NC */
+				nvidia,pins = "dap4_fs_pp4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pp5 { /* NC */
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_dout_pp6 { /* NC */
+				nvidia,pins = "dap4_dout_pp6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_sclk_pp7 { /* NC */
+				nvidia,pins = "dap4_sclk_pp7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col3_pq3 { /* NC */
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 { /* NC */
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row4_pr4 { /* NC */
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row5_pr5 { /* NC */
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row6_pr6 { /* NC */
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row7_pr7 { /* NC */
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row8_ps0 { /* NC */
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row9_ps1 { /* NC */
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row12_ps4 { /* NC */
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row13_ps5 { /* NC */
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row14_ps6 { /* NC */
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row15_ps7 { /* NC */
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row16_pt0 { /* NC */
+				nvidia,pins = "kb_row16_pt0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row17_pt1 { /* NC */
+				nvidia,pins = "kb_row17_pt1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu5 { /* NC */
+				nvidia,pins = "pu5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv0 { /* NC */
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv1 { /* NC */
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cd_n_pv2 { /* NC */
+				nvidia,pins = "sdmmc3_cd_n_pv2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_px1 { /* NC */
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_px3 { /* NC */
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb7 { /* NC */
+				nvidia,pins = "pbb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 { /* NC */
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc2 { /* NC */
+				nvidia,pins = "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_req_pee1 { /* NC */
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap_mclk1_req_pee2 { /* NC */
+				nvidia,pins = "dap_mclk1_req_pee2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra124-hsuart";
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra124-hsuart";
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra124-hsuart";
+	};
+
+	hdmi_ddc: i2c@7000c400 {
+		clock-frequency = <100000>;
+	};
+
+	/* PWR_I2C: power I2C to audio codec, PMIC and temperature sensor */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* SGTL5000 audio codec */
+		sgtl5000: codec@a {
+			compatible = "fsl,sgtl5000";
+			reg = <0x0a>;
+			VDDA-supply = <&reg_3v3>;
+			VDDIO-supply = <&vddio_1v8>;
+			clocks = <&tegra_car TEGRA124_CLK_EXTERN1>;
+		};
+
+		pmic: pmic@40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ams,system-power-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux {
+				gpio2_7 {
+					pins = "gpio2", /* PWR_EN_+V3.3 */
+					       "gpio7"; /* +V1.6_LPO */
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio1_3_4_5_6 {
+					pins = "gpio1", "gpio3", "gpio4",
+					       "gpio5", "gpio6";
+					bias-high-impedance;
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&reg_3v3>;
+				vsup-sd3-supply = <&reg_3v3>;
+				vsup-sd4-supply = <&reg_3v3>;
+				vsup-sd5-supply = <&reg_3v3>;
+				vin-ldo0-supply = <&vddio_ddr_1v35>;
+				vin-ldo1-6-supply = <&reg_3v3>;
+				vin-ldo2-5-7-supply = <&vddio_1v8>;
+				vin-ldo3-4-supply = <&reg_3v3>;
+				vin-ldo9-10-supply = <&reg_3v3>;
+				vin-ldo11-supply = <&reg_3v3>;
+
+				vdd_cpu: sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <2500000>;
+					regulator-max-microamp = <4000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				vddio_ddr_1v35: sd2 {
+					regulator-name =
+						"+V1.35_VDDIO_DDR(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name =
+						"+V1.35_VDDIO_DDR(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v05: sd4 {
+					regulator-name = "+V1.05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddio_1v8: sd5 {
+					regulator-name = "+V1.8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				vdd_gpu: sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <650000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				avdd_1v05: ldo0 {
+					regulator-name = "+V1.05_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,ext-control = <1>;
+				};
+
+				vddio_sdmmc1: ldo1 {
+					regulator-name = "VDDIO_SDMMC1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo2 {
+					regulator-name = "+V1.2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo3 {
+					regulator-name = "+V1.05_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,enable-tracking;
+				};
+
+				/* 1.8V for LVDS, 3.3V for eDP */
+				ldo4 {
+					regulator-name = "AVDD_LVDS0_PLL";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				/* LDO5 not used */
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				/* LDO7 not used */
+
+				ldo9 {
+					regulator-name = "+V3.3_ETH(ldo9)";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo10 {
+					regulator-name = "+V3.3_ETH(ldo10)";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo11 {
+					regulator-name = "+V1.8_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+
+		/*
+		 * TMP451 temperature sensor
+		 * Note: THERM_N directly connected to AS3722 PMIC THERM
+		 */
+		temperature-sensor@4c {
+			compatible = "ti,tmp451";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	/* SPI2: MCU SPI */
+	spi@7000d600 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+
+		/* Set power_off bit in ResetControl register of AS3722 PMIC */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x40>;
+			nvidia,reg-addr = <0x36>;
+			nvidia,reg-data = <0x2>;
+		};
+	};
+
+	sata@70020000 {
+		phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
+		phy-names = "sata-0";
+
+		avdd-supply = <&vdd_1v05>;
+		hvdd-supply = <&reg_3v3>;
+		vddio-supply = <&vdd_1v05>;
+	};
+
+	usb@70090000 {
+		/* USBO1, USBO1 (SS), USBH2, USBH4 and USBH4 (SS) */
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
+		phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0";
+
+		avddio-pex-supply = <&vdd_1v05>;
+		avdd-pll-erefe-supply = <&avdd_1v05>;
+		avdd-pll-utmip-supply = <&vddio_1v8>;
+		avdd-usb-ss-pll-supply = <&vdd_1v05>;
+		avdd-usb-supply = <&reg_3v3>;
+		dvddio-pex-supply = <&vdd_1v05>;
+		hvdd-usb-ss-pll-e-supply = <&reg_3v3>;
+		hvdd-usb-ss-supply = <&reg_3v3>;
+	};
+
+	padctl@7009f000 {
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-1 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-2 {
+						nvidia,function = "pcie";
+						status = "okay";
+					};
+
+					pcie-3 {
+						nvidia,function = "pcie";
+						status = "okay";
+					};
+
+					pcie-4 {
+						nvidia,function = "pcie";
+						status = "okay";
+					};
+				};
+			};
+
+			sata {
+				status = "okay";
+
+				lanes {
+					sata-0 {
+						nvidia,function = "sata";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			/* USBO1 */
+			usb2-0 {
+				status = "okay";
+				mode = "otg";
+
+				vbus-supply = <&reg_usbo1_vbus>;
+			};
+
+			/* USBH2 */
+			usb2-1 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&reg_usbh_vbus>;
+			};
+
+			/* USBH4 */
+			usb2-2 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&reg_usbh_vbus>;
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <2>;
+				status = "okay";
+			};
+
+			usb3-1 {
+				nvidia,usb2-companion = <0>;
+				status = "okay";
+			};
+		};
+	};
+
+	/* eMMC */
+	sdhci@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	/* CPU DFLL clock */
+	clock@70110000 {
+		status = "okay";
+		vdd-cpu-supply = <&vdd_cpu>;
+		nvidia,i2c-fs-rate = <400000>;
+	};
+
+	ahub@70300000 {
+		i2s@70301200 {
+			status = "okay";
+		};
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	cpus {
+		cpu@0 {
+			vdd-cpu-supply = <&vdd_cpu>;
+		};
+	};
+
+	reg_1v05_avdd_hdmi_pll: regulator-1v05-avdd-hdmi-pll {
+		compatible = "regulator-fixed";
+		regulator-name = "+V1.05_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+		vin-supply = <&vdd_1v05>;
+	};
+
+	reg_3v3_mxm: regulator-3v3-mxm {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_MXM";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		/* PWR_EN_+V3.3 */
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3_mxm>;
+	};
+
+	reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_HDMI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_1v05>;
+	};
+
+	sound {
+		compatible = "toradex,tegra-audio-sgtl5000-apalis_tk1",
+			     "nvidia,tegra-audio-sgtl5000";
+		nvidia,model = "Toradex Apalis TK1";
+		nvidia,audio-routing =
+			"Headphone Jack", "HP_OUT",
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack";
+		nvidia,i2s-controller = <&tegra_i2s2>;
+		nvidia,audio-codec = <&sgtl5000>;
+		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA124_CLK_EXTERN1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	thermal-zones {
+		cpu {
+			trips {
+				trip@0 {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps because
+				 * there are no cooling devices
+				 */
+			};
+		};
+
+		mem {
+			trips {
+				trip@0 {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps because
+				 * there are no cooling devices
+				 */
+			};
+		};
+
+		gpu {
+			trips {
+				trip@0 {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps because
+				 * there are no cooling devices
+				 */
+			};
+		};
+	};
+};
diff --git a/src/arm/tegra124-jetson-tk1-emc.dtsi b/src/arm/tegra124-jetson-tk1-emc.dtsi
index 2c5cede686dc..accb7055165a 100644
--- a/src/arm/tegra124-jetson-tk1-emc.dtsi
+++ b/src/arm/tegra124-jetson-tk1-emc.dtsi
@@ -1,5 +1,5 @@
 / {
-	clock@0,60006000 {
+	clock@60006000 {
 		emc-timings-3 {
 			nvidia,ram-code = <3>;
 
@@ -78,7 +78,7 @@
 		};
 	};
 
-	emc@0,7001b000 {
+	emc@7001b000 {
 		emc-timings-3 {
 			nvidia,ram-code = <3>;
 
@@ -2101,7 +2101,7 @@
 		};
 	};
 
-	memory-controller@0,70019000 {
+	memory-controller@70019000 {
 		emc-timings-3 {
 			nvidia,ram-code = <3>;
 
diff --git a/src/arm/tegra124-jetson-tk1.dts b/src/arm/tegra124-jetson-tk1.dts
index 941f36263c8f..53994f9fbbcc 100644
--- a/src/arm/tegra124-jetson-tk1.dts
+++ b/src/arm/tegra124-jetson-tk1.dts
@@ -10,8 +10,8 @@
 	compatible = "nvidia,jetson-tk1", "nvidia,tegra124";
 
 	aliases {
-		rtc0 = "/i2c@0,7000d000/pmic@40";
-		rtc1 = "/rtc@0,7000e000";
+		rtc0 = "/i2c@7000d000/pmic@40";
+		rtc1 = "/rtc@7000e000";
 
 		/* This order keeps the mapping DB9 connector <-> ttyS0 */
 		serial0 = &uartd;
@@ -27,7 +27,7 @@
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
-	pcie-controller@0,01003000 {
+	pcie-controller@01003000 {
 		status = "okay";
 
 		avddio-pex-supply = <&vdd_1v05_run>;
@@ -40,21 +40,21 @@
 
 		/* Mini PCIe */
 		pci@1,0 {
-			phys = <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-4}>;
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
 			phy-names = "pcie-0";
 			status = "okay";
 		};
 
 		/* Gigabit Ethernet */
 		pci@2,0 {
-			phys = <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-2}>;
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
 			phy-names = "pcie-0";
 			status = "okay";
 		};
 	};
 
-	host1x@0,50000000 {
-		hdmi@0,54280000 {
+	host1x@50000000 {
+		hdmi@54280000 {
 			status = "okay";
 
 			hdmi-supply = <&vdd_5v0_hdmi>;
@@ -75,7 +75,7 @@
 		vdd-supply = <&vdd_gpu>;
 	};
 
-	pinmux: pinmux@0,70000868 {
+	pinmux: pinmux@70000868 {
 		pinctrl-names = "boot";
 		pinctrl-0 = <&state_boot>;
 
@@ -1356,14 +1356,6 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			owr {
-				nvidia,pins = "owr";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
-			};
 			clk_32k_in {
 				nvidia,pins = "clk_32k_in";
 				nvidia,function = "clk";
@@ -1378,6 +1370,10 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
+			dsi_b {
+				nvidia,pins = "mipi_pad_ctrl_dsi_b";
+				nvidia,function = "dsi_b";
+			};
 		};
 	};
 
@@ -1404,12 +1400,12 @@
 	};
 
 	/* DB9 serial port */
-	serial@0,70006300 {
+	serial@70006300 {
 		status = "okay";
 	};
 
 	/* Expansion GEN1_I2C_*, mini-PCIe I2C, on-board components */
-	i2c@0,7000c000 {
+	i2c@7000c000 {
 		status = "okay";
 		clock-frequency = <100000>;
 
@@ -1437,25 +1433,25 @@
 	};
 
 	/* Expansion GEN2_I2C_* */
-	i2c@0,7000c400 {
+	i2c@7000c400 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
 	/* Expansion CAM_I2C_* */
-	i2c@0,7000c500 {
+	i2c@7000c500 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
 	/* HDMI DDC */
-	hdmi_ddc: i2c@0,7000c700 {
+	hdmi_ddc: i2c@7000c700 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
 	/* Expansion PWR_I2C_*, on-board components */
-	i2c@0,7000d000 {
+	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
 
@@ -1646,12 +1642,12 @@
 	};
 
 	/* Expansion TS_SPI_* */
-	spi@0,7000d400 {
+	spi@7000d400 {
 		status = "okay";
 	};
 
 	/* Internal SPI */
-	spi@0,7000da00 {
+	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
 		spi-flash@0 {
@@ -1661,7 +1657,7 @@
 		};
 	};
 
-	pmc@0,7000e400 {
+	pmc@7000e400 {
 		nvidia,invert-interrupt;
 		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <500>;
@@ -1680,10 +1676,10 @@
 	};
 
 	/* Serial ATA */
-	sata@0,70020000 {
+	sata@70020000 {
 		status = "okay";
 
-		phys = <&{/padctl@0,7009f000/pads/sata/lanes/sata-0}>;
+		phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
 		phy-names = "sata-0";
 
 		hvdd-supply = <&vdd_3v3_lp0>;
@@ -1694,15 +1690,15 @@
 		target-12v-supply = <&vdd_12v0_sata>;
 	};
 
-	hda@0,70030000 {
+	hda@70030000 {
 		status = "okay";
 	};
 
-	usb@0,70090000 {
-		phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-0}>, /* Micro A/B */
-		       <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* Mini PCIe */
-		       <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* USB3 */
-		       <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>; /* USB3 */
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* Micro A/B */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Mini PCIe */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* USB3 */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; /* USB3 */
 		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0";
 
 		avddio-pex-supply = <&vdd_1v05_run>;
@@ -1717,7 +1713,7 @@
 		status = "okay";
 	};
 
-	padctl@0,7009f000 {
+	padctl@7009f000 {
 		status = "okay";
 
 		pads {
@@ -1804,7 +1800,7 @@
 	};
 
 	/* SD card */
-	sdhci@0,700b0400 {
+	sdhci@700b0400 {
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
@@ -1814,40 +1810,40 @@
 	};
 
 	/* eMMC */
-	sdhci@0,700b0600 {
+	sdhci@700b0600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
 	};
 
 	/* CPU DFLL clock */
-	clock@0,70110000 {
+	clock@70110000 {
 		status = "okay";
 		vdd-cpu-supply = <&vdd_cpu>;
 		nvidia,i2c-fs-rate = <400000>;
 	};
 
-	ahub@0,70300000 {
-		i2s@0,70301100 {
+	ahub@70300000 {
+		i2s@70301100 {
 			status = "okay";
 		};
 	};
 
 	/* mini-PCIe USB */
-	usb@0,7d004000 {
+	usb@7d004000 {
 		status = "okay";
 	};
 
-	usb-phy@0,7d004000 {
+	usb-phy@7d004000 {
 		status = "okay";
 	};
 
 	/* USB A connector */
-	usb@0,7d008000 {
+	usb@7d008000 {
 		status = "okay";
 	};
 
-	usb-phy@0,7d008000 {
+	usb-phy@7d008000 {
 		status = "okay";
 		vbus-supply = <&vdd_usb3_vbus>;
 	};
@@ -2049,44 +2045,32 @@
 	thermal-zones {
 		cpu {
 			trips {
-				trip@0 {
+				cpu-shutdown-trip {
 					temperature = <101000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				/* There are currently no cooling maps because there are no cooling devices */
-			};
 		};
 
 		mem {
 			trips {
-				trip@0 {
+				mem-shutdown-trip {
 					temperature = <101000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				/* There are currently no cooling maps because there are no cooling devices */
-			};
 		};
 
 		gpu {
 			trips {
-				trip@0 {
+				gpu-shutdown-trip {
 					temperature = <101000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				/* There are currently no cooling maps because there are no cooling devices */
-			};
 		};
 	};
 };
diff --git a/src/arm/tegra124-nyan-big-emc.dtsi b/src/arm/tegra124-nyan-big-emc.dtsi
index 1a5748d05dda..4458e86b2769 100644
--- a/src/arm/tegra124-nyan-big-emc.dtsi
+++ b/src/arm/tegra124-nyan-big-emc.dtsi
@@ -1,5 +1,5 @@
 / {
-	clock@0,60006000 {
+	clock@60006000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
@@ -67,7 +67,7 @@
 		};
 	};
 
-	emc@0,7001b000 {
+	emc@7001b000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
@@ -1754,7 +1754,7 @@
 		};
 	};
 
-	memory-controller@0,70019000 {
+	memory-controller@70019000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
diff --git a/src/arm/tegra124-nyan-big.dts b/src/arm/tegra124-nyan-big.dts
index 2d21253ea4e3..67d7cfb32541 100644
--- a/src/arm/tegra124-nyan-big.dts
+++ b/src/arm/tegra124-nyan-big.dts
@@ -15,7 +15,7 @@
 		ddc-i2c-bus = <&dpaux>;
 	};
 
-	sdhci@0,700b0400 { /* SD Card on this bus */
+	sdhci@700b0400 { /* SD Card on this bus */
 		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
 	};
 
@@ -26,7 +26,7 @@
 		nvidia,model = "GoogleNyanBig";
 	};
 
-	pinmux@0,70000868 {
+	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_default>;
 
diff --git a/src/arm/tegra124-nyan-blaze-emc.dtsi b/src/arm/tegra124-nyan-blaze-emc.dtsi
index 9ecd108f56cf..4e7b59e25728 100644
--- a/src/arm/tegra124-nyan-blaze-emc.dtsi
+++ b/src/arm/tegra124-nyan-blaze-emc.dtsi
@@ -1,5 +1,5 @@
 / {
-	clock@0,60006000 {
+	clock@60006000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
@@ -67,7 +67,7 @@
 		};
 	};
 
-	emc@0,7001b000 {
+	emc@7001b000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
@@ -1754,7 +1754,7 @@
 		};
 	};
 
-	memory-controller@0,70019000 {
+	memory-controller@70019000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
diff --git a/src/arm/tegra124-nyan-blaze.dts b/src/arm/tegra124-nyan-blaze.dts
index 0d30c514ffad..c9582361c26e 100644
--- a/src/arm/tegra124-nyan-blaze.dts
+++ b/src/arm/tegra124-nyan-blaze.dts
@@ -22,7 +22,7 @@
 		nvidia,model = "GoogleNyanBlaze";
 	};
 
-	pinmux@0,70000868 {
+	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_default>;
 
diff --git a/src/arm/tegra124-nyan.dtsi b/src/arm/tegra124-nyan.dtsi
index 0710a600cc69..eabfa655a3cd 100644
--- a/src/arm/tegra124-nyan.dtsi
+++ b/src/arm/tegra124-nyan.dtsi
@@ -3,8 +3,8 @@
 
 / {
 	aliases {
-		rtc0 = "/i2c@0,7000d000/pmic@40";
-		rtc1 = "/rtc@0,7000e000";
+		rtc0 = "/i2c@7000d000/pmic@40";
+		rtc1 = "/rtc@7000e000";
 		serial0 = &uarta;
 	};
 
@@ -16,8 +16,8 @@
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
-	host1x@0,50000000 {
-		hdmi@0,54280000 {
+	host1x@50000000 {
+		hdmi@54280000 {
 			status = "okay";
 
 			vdd-supply = <&vdd_3v3_hdmi>;
@@ -29,29 +29,35 @@
 				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
 		};
 
-		sor@0,54540000 {
+		sor@54540000 {
 			status = "okay";
 
 			nvidia,dpaux = <&dpaux>;
 			nvidia,panel = <&panel>;
 		};
 
-		dpaux@0,545c0000 {
+		dpaux@545c0000 {
 			vdd-supply = <&vdd_3v3_panel>;
 			status = "okay";
 		};
 	};
 
-	serial@0,70006000 {
+	gpu@0,57000000 {
+		status = "okay";
+
+		vdd-supply = <&vdd_gpu>;
+	};
+
+	serial@70006000 {
 		/* Debug connector on the bottom of the board near SD card. */
 		status = "okay";
 	};
 
-	pwm@0,7000a000 {
+	pwm@7000a000 {
 		status = "okay";
 	};
 
-	i2c@0,7000c000 {
+	i2c@7000c000 {
 		status = "okay";
 		clock-frequency = <100000>;
 
@@ -72,7 +78,7 @@
 		};
 	};
 
-	i2c@0,7000c400 {
+	i2c@7000c400 {
 		status = "okay";
 		clock-frequency = <100000>;
 
@@ -85,7 +91,7 @@
 		};
 	};
 
-	i2c@0,7000c500 {
+	i2c@7000c500 {
 		status = "okay";
 		clock-frequency = <400000>;
 
@@ -95,12 +101,12 @@
 		};
 	};
 
-	hdmi_ddc: i2c@0,7000c700 {
+	hdmi_ddc: i2c@7000c700 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
-	i2c@0,7000d000 {
+	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
 
@@ -214,7 +220,7 @@
 					regulator-always-on;
 				};
 
-				sd6 {
+				vdd_gpu: sd6 {
 					regulator-name = "+VDD_GPU_AP";
 					regulator-min-microvolt = <650000>;
 					regulator-max-microvolt = <1200000>;
@@ -301,7 +307,7 @@
 		};
 	};
 
-	spi@0,7000d400 {
+	spi@7000d400 {
 		status = "okay";
 
 		cros_ec: cros-ec@0 {
@@ -342,7 +348,7 @@
 		};
 	};
 
-	spi@0,7000da00 {
+	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
 
@@ -353,7 +359,7 @@
 		};
 	};
 
-	pmc@0,7000e400 {
+	pmc@7000e400 {
 		nvidia,invert-interrupt;
 		nvidia,suspend-mode = <0>;
 		nvidia,cpu-pwr-good-time = <500>;
@@ -364,16 +370,16 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
-	hda@0,70030000 {
+	hda@70030000 {
 		status = "okay";
 	};
 
-	usb@0,70090000 {
-		phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
-		       <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
-		       <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
-		       <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
-		       <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
 		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
 
 		avddio-pex-supply = <&vdd_1v05_run>;
@@ -388,7 +394,7 @@
 		status = "okay";
 	};
 
-	padctl@0,7009f000 {
+	padctl@7009f000 {
 		status = "okay";
 
 		pads {
@@ -467,7 +473,7 @@
 		reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
 	};
 
-	sdhci@0,700b0000 { /* WiFi/BT on this bus */
+	sdhci@700b0000 { /* WiFi/BT on this bus */
 		status = "okay";
 		bus-width = <4>;
 		no-1-8-v;
@@ -478,7 +484,7 @@
 		keep-power-in-suspend;
 	};
 
-	sdhci@0,700b0400 { /* SD Card on this bus */
+	sdhci@700b0400 { /* SD Card on this bus */
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
@@ -487,7 +493,7 @@
 		vqmmc-supply = <&vddio_sdmmc3>;
 	};
 
-	sdhci@0,700b0600 { /* eMMC on this bus */
+	sdhci@700b0600 { /* eMMC on this bus */
 		status = "okay";
 		bus-width = <8>;
 		no-1-8-v;
@@ -495,14 +501,14 @@
 	};
 
 	/* CPU DFLL clock */
-	clock@0,70110000 {
+	clock@70110000 {
 		status = "disabled";
 		vdd-cpu-supply = <&vdd_cpu>;
 		nvidia,i2c-fs-rate = <400000>;
 	};
 
-	ahub@0,70300000 {
-		i2s@0,70301100 {
+	ahub@70300000 {
+		i2s@70301100 {
 			status = "okay";
 		};
 	};
diff --git a/src/arm/tegra124-venice2.dts b/src/arm/tegra124-venice2.dts
index 973446d07182..6e59cec0962b 100644
--- a/src/arm/tegra124-venice2.dts
+++ b/src/arm/tegra124-venice2.dts
@@ -8,8 +8,8 @@
 	compatible = "nvidia,venice2", "nvidia,tegra124";
 
 	aliases {
-		rtc0 = "/i2c@0,7000d000/pmic@40";
-		rtc1 = "/rtc@0,7000e000";
+		rtc0 = "/i2c@7000d000/pmic@40";
+		rtc1 = "/rtc@7000e000";
 		serial0 = &uarta;
 	};
 
@@ -21,8 +21,8 @@
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
-	host1x@0,50000000 {
-		hdmi@0,54280000 {
+	host1x@50000000 {
+		hdmi@54280000 {
 			status = "okay";
 
 			vdd-supply = <&vdd_3v3_hdmi>;
@@ -34,14 +34,14 @@
 				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
 		};
 
-		sor@0,54540000 {
+		sor@54540000 {
 			status = "okay";
 
 			nvidia,dpaux = <&dpaux>;
 			nvidia,panel = <&panel>;
 		};
 
-		dpaux@0,545c0000 {
+		dpaux@545c0000 {
 			vdd-supply = <&vdd_3v3_panel>;
 			status = "okay";
 		};
@@ -55,7 +55,7 @@
 		vdd-supply = <&vdd_gpu>;
 	};
 
-	pinmux: pinmux@0,70000868 {
+	pinmux: pinmux@70000868 {
 		pinctrl-names = "boot";
 		pinctrl-0 = <&pinmux_boot>;
 
@@ -596,15 +596,15 @@
 		};
 	};
 
-	serial@0,70006000 {
+	serial@70006000 {
 		status = "okay";
 	};
 
-	pwm@0,7000a000 {
+	pwm@7000a000 {
 		status = "okay";
 	};
 
-	i2c@0,7000c000 {
+	i2c@7000c000 {
 		status = "okay";
 		clock-frequency = <100000>;
 
@@ -616,7 +616,7 @@
 		};
 	};
 
-	i2c@0,7000c400 {
+	i2c@7000c400 {
 		status = "okay";
 		clock-frequency = <100000>;
 
@@ -629,17 +629,17 @@
 		};
 	};
 
-	i2c@0,7000c500 {
+	i2c@7000c500 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
-	hdmi_ddc: i2c@0,7000c700 {
+	hdmi_ddc: i2c@7000c700 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
-	i2c@0,7000d000 {
+	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
 
@@ -834,7 +834,7 @@
 		};
 	};
 
-	spi@0,7000d400 {
+	spi@7000d400 {
 		status = "okay";
 
 		cros_ec: cros-ec@0 {
@@ -874,7 +874,7 @@
 		};
 	};
 
-	spi@0,7000da00 {
+	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
 		spi-flash@0 {
@@ -884,7 +884,7 @@
 		};
 	};
 
-	pmc@0,7000e400 {
+	pmc@7000e400 {
 		nvidia,invert-interrupt;
 		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <500>;
@@ -895,16 +895,16 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
-	hda@0,70030000 {
+	hda@70030000 {
 		status = "okay";
 	};
 
-	usb@0,70090000 {
-		phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
-		       <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
-		       <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
-		       <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
-		       <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
 		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
 
 		avddio-pex-supply = <&vdd_1v05_run>;
@@ -919,7 +919,7 @@
 		status = "okay";
 	};
 
-	padctl@0,7009f000 {
+	padctl@7009f000 {
 		pads {
 			usb2 {
 				status = "okay";
@@ -998,7 +998,7 @@
 		};
 	};
 
-	sdhci@0,700b0400 {
+	sdhci@700b0400 {
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
 		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
 		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
@@ -1007,41 +1007,41 @@
 		vqmmc-supply = <&vddio_sdmmc3>;
 	};
 
-	sdhci@0,700b0600 {
+	sdhci@700b0600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
 	};
 
-	ahub@0,70300000 {
-		i2s@0,70301100 {
+	ahub@70300000 {
+		i2s@70301100 {
 			status = "okay";
 		};
 	};
 
-	usb@0,7d000000 {
+	usb@7d000000 {
 		status = "okay";
 	};
 
-	usb-phy@0,7d000000 {
+	usb-phy@7d000000 {
 		status = "okay";
 		vbus-supply = <&vdd_usb1_vbus>;
 	};
 
-	usb@0,7d004000 {
+	usb@7d004000 {
 		status = "okay";
 	};
 
-	usb-phy@0,7d004000 {
+	usb-phy@7d004000 {
 		status = "okay";
 		vbus-supply = <&vdd_run_cam>;
 	};
 
-	usb@0,7d008000 {
+	usb@7d008000 {
 		status = "okay";
 	};
 
-	usb-phy@0,7d008000 {
+	usb-phy@7d008000 {
 		status = "okay";
 		vbus-supply = <&vdd_usb3_vbus>;
 	};
diff --git a/src/arm/tegra124.dtsi b/src/arm/tegra124.dtsi
index ea4811870de2..187a36c6d0fc 100644
--- a/src/arm/tegra124.dtsi
+++ b/src/arm/tegra124.dtsi
@@ -14,7 +14,7 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	pcie-controller@0,01003000 {
+	pcie-controller@01003000 {
 		compatible = "nvidia,tegra124-pcie";
 		device_type = "pci";
 		reg = <0x0 0x01003000 0x0 0x00000800   /* PADS registers */
@@ -77,7 +77,7 @@
 		};
 	};
 
-	host1x@0,50000000 {
+	host1x@50000000 {
 		compatible = "nvidia,tegra124-host1x", "simple-bus";
 		reg = <0x0 0x50000000 0x0 0x00034000>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
@@ -91,7 +91,7 @@
 
 		ranges = <0 0x54000000 0 0x54000000 0 0x01000000>;
 
-		dc@0,54200000 {
+		dc@54200000 {
 			compatible = "nvidia,tegra124-dc";
 			reg = <0x0 0x54200000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
@@ -106,7 +106,7 @@
 			nvidia,head = <0>;
 		};
 
-		dc@0,54240000 {
+		dc@54240000 {
 			compatible = "nvidia,tegra124-dc";
 			reg = <0x0 0x54240000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
@@ -121,7 +121,7 @@
 			nvidia,head = <1>;
 		};
 
-		hdmi@0,54280000 {
+		hdmi@54280000 {
 			compatible = "nvidia,tegra124-hdmi";
 			reg = <0x0 0x54280000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -133,7 +133,7 @@
 			status = "disabled";
 		};
 
-		sor@0,54540000 {
+		sor@54540000 {
 			compatible = "nvidia,tegra124-sor";
 			reg = <0x0 0x54540000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
@@ -147,7 +147,7 @@
 			status = "disabled";
 		};
 
-		dpaux: dpaux@0,545c0000 {
+		dpaux: dpaux@545c0000 {
 			compatible = "nvidia,tegra124-dpaux";
 			reg = <0x0 0x545c0000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
@@ -160,7 +160,7 @@
 		};
 	};
 
-	gic: interrupt-controller@0,50041000 {
+	gic: interrupt-controller@50041000 {
 		compatible = "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
@@ -173,6 +173,11 @@
 		interrupt-parent = <&gic>;
 	};
 
+	/*
+	 * Please keep the following 0, notation in place as a former mainline
+	 * U-Boot version was looking for that particular notation in order to
+	 * perform required fix-ups on that GPU node.
+	 */
 	gpu@0,57000000 {
 		compatible = "nvidia,gk20a";
 		reg = <0x0 0x57000000 0x0 0x01000000>,
@@ -203,7 +208,7 @@
 		interrupt-parent = <&gic>;
 	};
 
-	timer@0,60005000 {
+	timer@60005000 {
 		compatible = "nvidia,tegra124-timer", "nvidia,tegra30-timer", "nvidia,tegra20-timer";
 		reg = <0x0 0x60005000 0x0 0x400>;
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
@@ -215,7 +220,7 @@
 		clocks = <&tegra_car TEGRA124_CLK_TIMER>;
 	};
 
-	tegra_car: clock@0,60006000 {
+	tegra_car: clock@60006000 {
 		compatible = "nvidia,tegra124-car";
 		reg = <0x0 0x60006000 0x0 0x1000>;
 		#clock-cells = <1>;
@@ -223,12 +228,12 @@
 		nvidia,external-memory-controller = <&emc>;
 	};
 
-	flow-controller@0,60007000 {
+	flow-controller@60007000 {
 		compatible = "nvidia,tegra124-flowctrl";
 		reg = <0x0 0x60007000 0x0 0x1000>;
 	};
 
-	actmon@0,6000c800 {
+	actmon@6000c800 {
 		compatible = "nvidia,tegra124-actmon";
 		reg = <0x0 0x6000c800 0x0 0x400>;
 		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -239,7 +244,7 @@
 		reset-names = "actmon";
 	};
 
-	gpio: gpio@0,6000d000 {
+	gpio: gpio@6000d000 {
 		compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
 		reg = <0x0 0x6000d000 0x0 0x1000>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
@@ -259,7 +264,7 @@
 		*/
 	};
 
-	apbdma: dma@0,60020000 {
+	apbdma: dma@60020000 {
 		compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma";
 		reg = <0x0 0x60020000 0x0 0x1400>;
 		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
@@ -300,13 +305,13 @@
 		#dma-cells = <1>;
 	};
 
-	apbmisc@0,70000800 {
+	apbmisc@70000800 {
 		compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc";
 		reg = <0x0 0x70000800 0x0 0x64>,   /* Chip revision */
 		      <0x0 0x7000e864 0x0 0x04>;   /* Strapping options */
 	};
 
-	pinmux: pinmux@0,70000868 {
+	pinmux: pinmux@70000868 {
 		compatible = "nvidia,tegra124-pinmux";
 		reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */
 		      <0x0 0x70003000 0x0 0x434>, /* Mux registers */
@@ -321,7 +326,7 @@
 	 * the APB DMA based serial driver, the compatible is
 	 * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
 	 */
-	uarta: serial@0,70006000 {
+	uarta: serial@70006000 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x70006000 0x0 0x40>;
 		reg-shift = <2>;
@@ -334,7 +339,7 @@
 		status = "disabled";
 	};
 
-	uartb: serial@0,70006040 {
+	uartb: serial@70006040 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x70006040 0x0 0x40>;
 		reg-shift = <2>;
@@ -347,7 +352,7 @@
 		status = "disabled";
 	};
 
-	uartc: serial@0,70006200 {
+	uartc: serial@70006200 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x70006200 0x0 0x40>;
 		reg-shift = <2>;
@@ -360,7 +365,7 @@
 		status = "disabled";
 	};
 
-	uartd: serial@0,70006300 {
+	uartd: serial@70006300 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x70006300 0x0 0x40>;
 		reg-shift = <2>;
@@ -373,7 +378,7 @@
 		status = "disabled";
 	};
 
-	pwm: pwm@0,7000a000 {
+	pwm: pwm@7000a000 {
 		compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
 		reg = <0x0 0x7000a000 0x0 0x100>;
 		#pwm-cells = <2>;
@@ -383,7 +388,7 @@
 		status = "disabled";
 	};
 
-	i2c@0,7000c000 {
+	i2c@7000c000 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
 		reg = <0x0 0x7000c000 0x0 0x100>;
 		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -398,7 +403,7 @@
 		status = "disabled";
 	};
 
-	i2c@0,7000c400 {
+	i2c@7000c400 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
 		reg = <0x0 0x7000c400 0x0 0x100>;
 		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -413,7 +418,7 @@
 		status = "disabled";
 	};
 
-	i2c@0,7000c500 {
+	i2c@7000c500 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
 		reg = <0x0 0x7000c500 0x0 0x100>;
 		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -428,7 +433,7 @@
 		status = "disabled";
 	};
 
-	i2c@0,7000c700 {
+	i2c@7000c700 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
 		reg = <0x0 0x7000c700 0x0 0x100>;
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
@@ -443,7 +448,7 @@
 		status = "disabled";
 	};
 
-	i2c@0,7000d000 {
+	i2c@7000d000 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
 		reg = <0x0 0x7000d000 0x0 0x100>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
@@ -458,7 +463,7 @@
 		status = "disabled";
 	};
 
-	i2c@0,7000d100 {
+	i2c@7000d100 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
 		reg = <0x0 0x7000d100 0x0 0x100>;
 		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
@@ -473,7 +478,7 @@
 		status = "disabled";
 	};
 
-	spi@0,7000d400 {
+	spi@7000d400 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
 		reg = <0x0 0x7000d400 0x0 0x200>;
 		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
@@ -488,7 +493,7 @@
 		status = "disabled";
 	};
 
-	spi@0,7000d600 {
+	spi@7000d600 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
 		reg = <0x0 0x7000d600 0x0 0x200>;
 		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -503,7 +508,7 @@
 		status = "disabled";
 	};
 
-	spi@0,7000d800 {
+	spi@7000d800 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
 		reg = <0x0 0x7000d800 0x0 0x200>;
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -518,7 +523,7 @@
 		status = "disabled";
 	};
 
-	spi@0,7000da00 {
+	spi@7000da00 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
 		reg = <0x0 0x7000da00 0x0 0x200>;
 		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
@@ -533,7 +538,7 @@
 		status = "disabled";
 	};
 
-	spi@0,7000dc00 {
+	spi@7000dc00 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
 		reg = <0x0 0x7000dc00 0x0 0x200>;
 		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
@@ -548,7 +553,7 @@
 		status = "disabled";
 	};
 
-	spi@0,7000de00 {
+	spi@7000de00 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
 		reg = <0x0 0x7000de00 0x0 0x200>;
 		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
@@ -563,21 +568,21 @@
 		status = "disabled";
 	};
 
-	rtc@0,7000e000 {
+	rtc@7000e000 {
 		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
 		reg = <0x0 0x7000e000 0x0 0x100>;
 		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_RTC>;
 	};
 
-	pmc@0,7000e400 {
+	pmc@7000e400 {
 		compatible = "nvidia,tegra124-pmc";
 		reg = <0x0 0x7000e400 0x0 0x400>;
 		clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
 	};
 
-	fuse@0,7000f800 {
+	fuse@7000f800 {
 		compatible = "nvidia,tegra124-efuse";
 		reg = <0x0 0x7000f800 0x0 0x400>;
 		clocks = <&tegra_car TEGRA124_CLK_FUSE>;
@@ -586,7 +591,7 @@
 		reset-names = "fuse";
 	};
 
-	mc: memory-controller@0,70019000 {
+	mc: memory-controller@70019000 {
 		compatible = "nvidia,tegra124-mc";
 		reg = <0x0 0x70019000 0x0 0x1000>;
 		clocks = <&tegra_car TEGRA124_CLK_MC>;
@@ -597,14 +602,14 @@
 		#iommu-cells = <1>;
 	};
 
-	emc: emc@0,7001b000 {
+	emc: emc@7001b000 {
 		compatible = "nvidia,tegra124-emc";
 		reg = <0x0 0x7001b000 0x0 0x1000>;
 
 		nvidia,memory-controller = <&mc>;
 	};
 
-	sata@0,70020000 {
+	sata@70020000 {
 		compatible = "nvidia,tegra124-ahci";
 		reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */
 		      <0x0 0x70020000 0x0 0x7000>; /* SATA */
@@ -621,7 +626,7 @@
 		status = "disabled";
 	};
 
-	hda@0,70030000 {
+	hda@70030000 {
 		compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda";
 		reg = <0x0 0x70030000 0x0 0x10000>;
 		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -636,7 +641,7 @@
 		status = "disabled";
 	};
 
-	usb@0,70090000 {
+	usb@70090000 {
 		compatible = "nvidia,tegra124-xusb";
 		reg = <0x0 0x70090000 0x0 0x8000>,
 		      <0x0 0x70098000 0x0 0x1000>,
@@ -671,7 +676,7 @@
 		status = "disabled";
 	};
 
-	padctl: padctl@0,7009f000 {
+	padctl: padctl@7009f000 {
 		compatible = "nvidia,tegra124-xusb-padctl";
 		reg = <0x0 0x7009f000 0x0 0x1000>;
 		resets = <&tegra_car 142>;
@@ -804,7 +809,7 @@
 		};
 	};
 
-	sdhci@0,700b0000 {
+	sdhci@700b0000 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0000 0x0 0x200>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -814,7 +819,7 @@
 		status = "disabled";
 	};
 
-	sdhci@0,700b0200 {
+	sdhci@700b0200 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0200 0x0 0x200>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -824,7 +829,7 @@
 		status = "disabled";
 	};
 
-	sdhci@0,700b0400 {
+	sdhci@700b0400 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0400 0x0 0x200>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -834,7 +839,7 @@
 		status = "disabled";
 	};
 
-	sdhci@0,700b0600 {
+	sdhci@700b0600 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0600 0x0 0x200>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
@@ -844,9 +849,11 @@
 		status = "disabled";
 	};
 
-	soctherm: thermal-sensor@0,700e2000 {
+	soctherm: thermal-sensor@700e2000 {
 		compatible = "nvidia,tegra124-soctherm";
-		reg = <0x0 0x700e2000 0x0 0x1000>;
+		reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */
+			0x0 0x60006000 0x0 0x400>; /* CAR reg_base */
+		reg-names = "soctherm-reg", "car-reg";
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
 			<&tegra_car TEGRA124_CLK_SOC_THERM>;
@@ -854,9 +861,18 @@
 		resets = <&tegra_car 78>;
 		reset-names = "soctherm";
 		#thermal-sensor-cells = <1>;
+
+		throttle-cfgs {
+			throttle_heavy: heavy {
+				nvidia,priority = <100>;
+				nvidia,cpu-throt-percent = <85>;
+
+				#cooling-cells = <2>;
+			};
+		};
 	};
 
-	dfll: clock@0,70110000 {
+	dfll: clock@70110000 {
 		compatible = "nvidia,tegra124-dfll";
 		reg = <0 0x70110000 0 0x100>, /* DFLL control */
 		      <0 0x70110000 0 0x100>, /* I2C output control */
@@ -880,7 +896,7 @@
 		status = "disabled";
 	};
 
-	ahub@0,70300000 {
+	ahub@70300000 {
 		compatible = "nvidia,tegra124-ahub";
 		reg = <0x0 0x70300000 0x0 0x200>,
 		      <0x0 0x70300800 0x0 0x800>,
@@ -932,7 +948,7 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 
-		tegra_i2s0: i2s@0,70301000 {
+		tegra_i2s0: i2s@70301000 {
 			compatible = "nvidia,tegra124-i2s";
 			reg = <0x0 0x70301000 0x0 0x100>;
 			nvidia,ahub-cif-ids = <4 4>;
@@ -942,7 +958,7 @@
 			status = "disabled";
 		};
 
-		tegra_i2s1: i2s@0,70301100 {
+		tegra_i2s1: i2s@70301100 {
 			compatible = "nvidia,tegra124-i2s";
 			reg = <0x0 0x70301100 0x0 0x100>;
 			nvidia,ahub-cif-ids = <5 5>;
@@ -952,7 +968,7 @@
 			status = "disabled";
 		};
 
-		tegra_i2s2: i2s@0,70301200 {
+		tegra_i2s2: i2s@70301200 {
 			compatible = "nvidia,tegra124-i2s";
 			reg = <0x0 0x70301200 0x0 0x100>;
 			nvidia,ahub-cif-ids = <6 6>;
@@ -962,7 +978,7 @@
 			status = "disabled";
 		};
 
-		tegra_i2s3: i2s@0,70301300 {
+		tegra_i2s3: i2s@70301300 {
 			compatible = "nvidia,tegra124-i2s";
 			reg = <0x0 0x70301300 0x0 0x100>;
 			nvidia,ahub-cif-ids = <7 7>;
@@ -972,7 +988,7 @@
 			status = "disabled";
 		};
 
-		tegra_i2s4: i2s@0,70301400 {
+		tegra_i2s4: i2s@70301400 {
 			compatible = "nvidia,tegra124-i2s";
 			reg = <0x0 0x70301400 0x0 0x100>;
 			nvidia,ahub-cif-ids = <8 8>;
@@ -983,7 +999,7 @@
 		};
 	};
 
-	usb@0,7d000000 {
+	usb@7d000000 {
 		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
 		reg = <0x0 0x7d000000 0x0 0x4000>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
@@ -995,7 +1011,7 @@
 		status = "disabled";
 	};
 
-	phy1: usb-phy@0,7d000000 {
+	phy1: usb-phy@7d000000 {
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d000000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
@@ -1020,7 +1036,7 @@
 		status = "disabled";
 	};
 
-	usb@0,7d004000 {
+	usb@7d004000 {
 		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
 		reg = <0x0 0x7d004000 0x0 0x4000>;
 		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
@@ -1032,7 +1048,7 @@
 		status = "disabled";
 	};
 
-	phy2: usb-phy@0,7d004000 {
+	phy2: usb-phy@7d004000 {
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d004000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
@@ -1056,7 +1072,7 @@
 		status = "disabled";
 	};
 
-	usb@0,7d008000 {
+	usb@7d008000 {
 		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
 		reg = <0x0 0x7d008000 0x0 0x4000>;
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
@@ -1068,7 +1084,7 @@
 		status = "disabled";
 	};
 
-	phy3: usb-phy@0,7d008000 {
+	phy3: usb-phy@7d008000 {
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d008000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
@@ -1149,6 +1165,26 @@
 
 			thermal-sensors =
 				<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+			trips {
+				cpu-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+				cpu_throttle_trip: throttle-trip {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
 		};
 
 		mem {
@@ -1157,6 +1193,21 @@
 
 			thermal-sensors =
 				<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+			trips {
+				mem-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
 		};
 
 		gpu {
@@ -1165,6 +1216,26 @@
 
 			thermal-sensors =
 				<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+			trips {
+				gpu-shutdown-trip {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+				gpu_throttle_trip: throttle-trip {
+					temperature = <99000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
 		};
 
 		pllx {
@@ -1173,6 +1244,21 @@
 
 			thermal-sensors =
 				<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+			trips {
+				pllx-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
 		};
 	};
 
diff --git a/src/arm/tegra20-colibri-512.dtsi b/src/arm/tegra20-colibri-512.dtsi
index 8e0066ad9628..1242b841f147 100644
--- a/src/arm/tegra20-colibri-512.dtsi
+++ b/src/arm/tegra20-colibri-512.dtsi
@@ -478,7 +478,7 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
diff --git a/src/arm/tegra20-harmony.dts b/src/arm/tegra20-harmony.dts
index d2e960cbc001..d4fb4d39ede7 100644
--- a/src/arm/tegra20-harmony.dts
+++ b/src/arm/tegra20-harmony.dts
@@ -646,7 +646,7 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
diff --git a/src/arm/tegra20-paz00.dts b/src/arm/tegra20-paz00.dts
index 33ed2b23026b..4e361a8c167e 100644
--- a/src/arm/tegra20-paz00.dts
+++ b/src/arm/tegra20-paz00.dts
@@ -512,7 +512,7 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
diff --git a/src/arm/tegra20-seaboard.dts b/src/arm/tegra20-seaboard.dts
index 94b60a710dd8..2017acacc00c 100644
--- a/src/arm/tegra20-seaboard.dts
+++ b/src/arm/tegra20-seaboard.dts
@@ -798,7 +798,7 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
diff --git a/src/arm/tegra20-tamonten.dtsi b/src/arm/tegra20-tamonten.dtsi
index 025e9e8037da..27d2bbbf1eae 100644
--- a/src/arm/tegra20-tamonten.dtsi
+++ b/src/arm/tegra20-tamonten.dtsi
@@ -508,7 +508,7 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
diff --git a/src/arm/tegra20-trimslice.dts b/src/arm/tegra20-trimslice.dts
index 4a035f74043a..381747f114a9 100644
--- a/src/arm/tegra20-trimslice.dts
+++ b/src/arm/tegra20-trimslice.dts
@@ -383,7 +383,7 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
diff --git a/src/arm/tegra20-ventana.dts b/src/arm/tegra20-ventana.dts
index a28c060a839b..8f0aaabf7e28 100644
--- a/src/arm/tegra20-ventana.dts
+++ b/src/arm/tegra20-ventana.dts
@@ -592,7 +592,7 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
diff --git a/src/arm/tegra20-whistler.dts b/src/arm/tegra20-whistler.dts
index 073806d07b2b..1e06f854c8b4 100644
--- a/src/arm/tegra20-whistler.dts
+++ b/src/arm/tegra20-whistler.dts
@@ -569,7 +569,7 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
diff --git a/src/arm/tegra20.dtsi b/src/arm/tegra20.dtsi
index 2207c08e3fa3..e8807503f87c 100644
--- a/src/arm/tegra20.dtsi
+++ b/src/arm/tegra20.dtsi
@@ -376,6 +376,19 @@
 		status = "disabled";
 	};
 
+	gmi@70009000 {
+		compatible = "nvidia,tegra20-gmi";
+		reg = <0x70009000 0x1000>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xd0000000 0xfffffff>;
+		clocks = <&tegra_car TEGRA20_CLK_NOR>;
+		clock-names = "gmi";
+		resets = <&tegra_car 42>;
+		reset-names = "gmi";
+		status = "disabled";
+	};
+
 	pwm: pwm@7000a000 {
 		compatible = "nvidia,tegra20-pwm";
 		reg = <0x7000a000 0x100>;
diff --git a/src/arm/tegra30-apalis.dtsi b/src/arm/tegra30-apalis.dtsi
index bf361277fe10..f6c7c3e958ac 100644
--- a/src/arm/tegra30-apalis.dtsi
+++ b/src/arm/tegra30-apalis.dtsi
@@ -48,6 +48,24 @@
 		pinctrl-0 = <&state_default>;
 
 		state_default: pinmux {
+			/* Analogue Audio (On-module) */
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins =	"dap3_fs_pp0",
+						"dap3_sclk_pp3",
+						"dap3_din_pp1",
+						"dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
 			/* Apalis BKL1_ON */
 			pv2 {
 				nvidia,pins = "pv2";
@@ -429,6 +447,15 @@
 		status = "okay";
 		clock-frequency = <100000>;
 
+		/* SGTL5000 audio codec */
+		sgtl5000: codec@a {
+			compatible = "fsl,sgtl5000";
+			reg = <0x0a>;
+			VDDA-supply = <&sys_3v3_reg>;
+			VDDIO-supply = <&sys_3v3_reg>;
+			clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
+		};
+
 		pmic: tps65911@2d {
 			compatible = "ti,tps65911";
 			reg = <0x2d>;
@@ -567,7 +594,7 @@
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
 
-			stmpe_touchscreen {
+			stmpe_touchscreen@0 {
 				compatible = "st,stmpe-ts";
 				reg = <0>;
 				/* 3.25 MHz ADC clock speed */
@@ -660,6 +687,12 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
+	ahub@70080000 {
+		i2s@70080500 {
+			status = "okay";
+		};
+	};
+
 	/* eMMC */
 	sdhci@78000600 {
 		status = "okay";
@@ -674,13 +707,14 @@
 
 		clk32k_in: clk@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
+
 		clk16m: clk@1 {
 			compatible = "fixed-clock";
-			reg=<1>;
+			reg = <1>;
 			#clock-cells = <0>;
 			clock-frequency = <16000000>;
 			clock-output-names = "clk16m";
@@ -732,4 +766,20 @@
 			regulator-always-on;
 		};
 	};
+
+	sound {
+		compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
+			     "nvidia,tegra-audio-sgtl5000";
+		nvidia,model = "Toradex Apalis T30";
+		nvidia,audio-routing =
+			"Headphone Jack", "HP_OUT",
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack";
+		nvidia,i2s-controller = <&tegra_i2s2>;
+		nvidia,audio-codec = <&sgtl5000>;
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA30_CLK_EXTERN1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
 };
diff --git a/src/arm/tegra30-beaver.dts b/src/arm/tegra30-beaver.dts
index b6da15d823a6..0350002849d5 100644
--- a/src/arm/tegra30-beaver.dts
+++ b/src/arm/tegra30-beaver.dts
@@ -1952,7 +1952,7 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
diff --git a/src/arm/tegra30-cardhu.dtsi b/src/arm/tegra30-cardhu.dtsi
index 4721c1c9c780..f11012bb58cc 100644
--- a/src/arm/tegra30-cardhu.dtsi
+++ b/src/arm/tegra30-cardhu.dtsi
@@ -423,7 +423,7 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
diff --git a/src/arm/tegra30-colibri-eval-v3.dts b/src/arm/tegra30-colibri-eval-v3.dts
index 76875c3160fe..a8c0318743b6 100644
--- a/src/arm/tegra30-colibri-eval-v3.dts
+++ b/src/arm/tegra30-colibri-eval-v3.dts
@@ -131,7 +131,7 @@
 	clocks {
 		clk16m: clk@1 {
 			compatible = "fixed-clock";
-			reg=<1>;
+			reg = <1>;
 			#clock-cells = <0>;
 			clock-frequency = <16000000>;
 			clock-output-names = "clk16m";
diff --git a/src/arm/tegra30-colibri.dtsi b/src/arm/tegra30-colibri.dtsi
index 2d8c58fd9357..5360d638eedc 100644
--- a/src/arm/tegra30-colibri.dtsi
+++ b/src/arm/tegra30-colibri.dtsi
@@ -29,6 +29,24 @@
 		pinctrl-0 = <&state_default>;
 
 		state_default: pinmux {
+			/* Analogue Audio (On-module) */
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins =	"dap3_fs_pp0",
+						"dap3_sclk_pp3",
+						"dap3_din_pp1",
+						"dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
 			/* Colibri BL_ON */
 			pv2 {
 				nvidia,pins = "pv2";
@@ -207,6 +225,15 @@
 		status = "okay";
 		clock-frequency = <100000>;
 
+		/* SGTL5000 audio codec */
+		sgtl5000: codec@a {
+			compatible = "fsl,sgtl5000";
+			reg = <0x0a>;
+			VDDA-supply = <&sys_3v3_reg>;
+			VDDIO-supply = <&sys_3v3_reg>;
+			clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
+		};
+
 		pmic: tps65911@2d {
 			compatible = "ti,tps65911";
 			reg = <0x2d>;
@@ -396,6 +423,12 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
+	ahub@70080000 {
+		i2s@70080500 {
+			status = "okay";
+		};
+	};
+
 	/* eMMC */
 	sdhci@78000600 {
 		status = "okay";
@@ -420,7 +453,7 @@
 
 		clk32k_in: clk@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
@@ -471,4 +504,20 @@
 			regulator-always-on;
 		};
 	};
+
+	sound {
+		compatible = "toradex,tegra-audio-sgtl5000-colibri_t30",
+			     "nvidia,tegra-audio-sgtl5000";
+		nvidia,model = "Toradex Colibri T30";
+		nvidia,audio-routing =
+			"Headphone Jack", "HP_OUT",
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack";
+		nvidia,i2s-controller = <&tegra_i2s2>;
+		nvidia,audio-codec = <&sgtl5000>;
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA30_CLK_EXTERN1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
 };
diff --git a/src/arm/tegra30.dtsi b/src/arm/tegra30.dtsi
index 5030065cbdfe..bbb1c002e7f1 100644
--- a/src/arm/tegra30.dtsi
+++ b/src/arm/tegra30.dtsi
@@ -439,6 +439,19 @@
 		status = "disabled";
 	};
 
+	gmi@70009000 {
+		compatible = "nvidia,tegra30-gmi";
+		reg = <0x70009000 0x1000>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0x48000000 0x7ffffff>;
+		clocks = <&tegra_car TEGRA30_CLK_NOR>;
+		clock-names = "gmi";
+		resets = <&tegra_car 42>;
+		reset-names = "gmi";
+		status = "disabled";
+	};
+
 	pwm: pwm@7000a000 {
 		compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm";
 		reg = <0x7000a000 0x100>;
diff --git a/src/arm/tny_a9260_common.dtsi b/src/arm/tny_a9260_common.dtsi
index ce7138c3af1b..f9dc463b9e48 100644
--- a/src/arm/tny_a9260_common.dtsi
+++ b/src/arm/tny_a9260_common.dtsi
@@ -16,15 +16,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
diff --git a/src/arm/tny_a9263.dts b/src/arm/tny_a9263.dts
index 3043296345b7..9161cd9889b4 100644
--- a/src/arm/tny_a9263.dts
+++ b/src/arm/tny_a9263.dts
@@ -21,15 +21,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -99,7 +90,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 };
diff --git a/src/arm/tps65217.dtsi b/src/arm/tps65217.dtsi
index a63272422d76..02de56b55823 100644
--- a/src/arm/tps65217.dtsi
+++ b/src/arm/tps65217.dtsi
@@ -13,6 +13,18 @@
 
 &tps {
 	compatible = "ti,tps65217";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	charger {
+		compatible = "ti,tps65217-charger";
+		status = "disabled";
+	};
+
+	pwrbutton {
+		compatible = "ti,tps65217-pwrbutton";
+		status = "disabled";
+	};
 
 	regulators {
 		#address-cells = <1>;
diff --git a/src/arm/uniphier-ld4-ref.dts b/src/arm/uniphier-ld4-ref.dts
new file mode 100644
index 000000000000..110031bc0e7e
--- /dev/null
+++ b/src/arm/uniphier-ld4-ref.dts
@@ -0,0 +1,102 @@
+/*
+ * Device Tree Source for UniPhier LD4 Reference Board
+ *
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ld4.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier LD4 Reference Board";
+	compatible = "socionext,uniphier-ld4-ref", "socionext,uniphier-ld4";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+	};
+};
+
+&ethsc {
+	interrupts = <0 49 4>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/src/arm/uniphier-ld4.dtsi b/src/arm/uniphier-ld4.dtsi
new file mode 100644
index 000000000000..a7c494d7c43a
--- /dev/null
+++ b/src/arm/uniphier-ld4.dtsi
@@ -0,0 +1,327 @@
+/*
+ * Device Tree Source for UniPhier LD4 SoC
+ *
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "socionext,uniphier-ld4";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24576000>;
+		};
+
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		l2: l2-cache@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>;
+			cache-unified;
+			cache-size = <(512 * 1024)>;
+			cache-sets = <256>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 29 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+		};
+
+		i2c0: i2c@58400000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58400000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58480000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58480000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for DMD */
+		i2c2: i2c@58500000 {
+			compatible = "socionext,uniphier-i2c";
+			reg = <0x58500000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			clock-frequency = <400000>;
+		};
+
+		i2c3: i2c@58580000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58580000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			clock-frequency = <100000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59800000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		mioctrl@59810000 {
+			compatible = "socionext,uniphier-ld4-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-ld4-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-ld4-mio-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-ld4-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-ld4-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-ld4-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		usb0: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <0 80 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+				 <&mio_rst 12>;
+		};
+
+		usb1: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <0 81 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+				 <&mio_rst 13>;
+		};
+
+		usb2: usb@5a820100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a820100 0x100>;
+			interrupts = <0 82 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
+				 <&mio_rst 14>;
+		};
+
+		soc-glue@5f800000 {
+			compatible = "socionext,uniphier-ld4-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-ld4-pinctrl";
+			};
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-ld4-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-ld4-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-ld4-reset";
+				#reset-cells = <1>;
+			};
+		};
+	};
+};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/src/arm/uniphier-ld6b-ref.dts b/src/arm/uniphier-ld6b-ref.dts
new file mode 100644
index 000000000000..c05d631dcf02
--- /dev/null
+++ b/src/arm/uniphier-ld6b-ref.dts
@@ -0,0 +1,96 @@
+/*
+ * Device Tree Source for UniPhier LD6b Reference Board
+ *
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ld6b.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier LD6b Reference Board";
+	compatible = "socionext,uniphier-ld6b-ref", "socionext,uniphier-ld6b";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+};
+
+&ethsc {
+	interrupts = <0 52 4>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/src/arm/uniphier-ld6b.dtsi b/src/arm/uniphier-ld6b.dtsi
new file mode 100644
index 000000000000..905c77d499eb
--- /dev/null
+++ b/src/arm/uniphier-ld6b.dtsi
@@ -0,0 +1,68 @@
+/*
+ * Device Tree Source for UniPhier LD6b SoC
+ *
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * LD6b consists of two silicon dies: D-chip and A-chip.
+ * The D-chip (digital chip) is the same as the PXs2 die.
+ * Reuse the PXs2 device tree with some properties overridden.
+ */
+/include/ "uniphier-pxs2.dtsi"
+
+/ {
+	compatible = "socionext,uniphier-ld6b";
+};
+
+/* UART3 unavailable: the pads are not wired to the package balls */
+&serial3 {
+	status = "disabled";
+};
+
+/*
+ * LD6b and PXs2 have completely different packages,
+ * which makes the pinctrl driver unshareable.
+ */
+&pinctrl {
+	compatible = "socionext,uniphier-ld6b-pinctrl";
+};
diff --git a/src/arm/uniphier-pinctrl.dtsi b/src/arm/uniphier-pinctrl.dtsi
index f2f3fbe2d517..10a711041b4a 100644
--- a/src/arm/uniphier-pinctrl.dtsi
+++ b/src/arm/uniphier-pinctrl.dtsi
@@ -78,6 +78,11 @@
 		function = "nand";
 	};
 
+	pinctrl_system_bus: system_bus_grp {
+		groups = "system_bus", "system_bus_cs1";
+		function = "system_bus";
+	};
+
 	pinctrl_uart0: uart0_grp {
 		groups = "uart0";
 		function = "uart0";
diff --git a/src/arm/uniphier-pro4-ace.dts b/src/arm/uniphier-pro4-ace.dts
new file mode 100644
index 000000000000..0ab0a40c041e
--- /dev/null
+++ b/src/arm/uniphier-pro4-ace.dts
@@ -0,0 +1,114 @@
+/*
+ * Device Tree Source for UniPhier Pro4 Ace Board
+ *
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-pro4.dtsi"
+
+/ {
+	model = "UniPhier Pro4 Ace Board";
+	compatible = "socionext,uniphier-pro4-ace", "socionext,uniphier-pro4";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "st,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
diff --git a/src/arm/uniphier-pro4-ref.dts b/src/arm/uniphier-pro4-ref.dts
new file mode 100644
index 000000000000..9e92e60d25ce
--- /dev/null
+++ b/src/arm/uniphier-pro4-ref.dts
@@ -0,0 +1,104 @@
+/*
+ * Device Tree Source for UniPhier Pro4 Reference Board
+ *
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-pro4.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier Pro4 Reference Board";
+	compatible = "socionext,uniphier-pro4-ref", "socionext,uniphier-pro4";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+};
+
+&ethsc {
+	interrupts = <0 50 4>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
diff --git a/src/arm/uniphier-pro4-sanji.dts b/src/arm/uniphier-pro4-sanji.dts
new file mode 100644
index 000000000000..dc4ea8832ce2
--- /dev/null
+++ b/src/arm/uniphier-pro4-sanji.dts
@@ -0,0 +1,109 @@
+/*
+ * Device Tree Source for UniPhier Pro4 Sanji Board
+ *
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-pro4.dtsi"
+
+/ {
+	model = "UniPhier Pro4 Sanji Board";
+	compatible = "socionext,uniphier-pro4-sanji", "socionext,uniphier-pro4";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "st,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
diff --git a/src/arm/uniphier-pro4.dtsi b/src/arm/uniphier-pro4.dtsi
new file mode 100644
index 000000000000..e960b09ff01c
--- /dev/null
+++ b/src/arm/uniphier-pro4.dtsi
@@ -0,0 +1,347 @@
+/*
+ * Device Tree Source for UniPhier Pro4 SoC
+ *
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "socionext,uniphier-pro4";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		l2: l2-cache@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>;
+			cache-unified;
+			cache-size = <(768 * 1024)>;
+			cache-sets = <256>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 177 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			clock-frequency = <100000>;
+		};
+
+		/* i2c4 does not exist */
+
+		/* chip-internal connection for DMD */
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 25 4>;
+			clocks = <&peri_clk 9>;
+			clock-frequency = <400000>;
+		};
+
+		/* chip-internal connection for HDMI */
+		i2c6: i2c@58786000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58786000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 26 4>;
+			clocks = <&peri_clk 10>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59800000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		mioctrl@59810000 {
+			compatible = "socionext,uniphier-pro4-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-pro4-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-pro4-mio-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-pro4-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-pro4-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-pro4-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		usb2: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <0 80 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+				 <&mio_rst 12>;
+		};
+
+		usb3: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <0 81 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb3>;
+			clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+				 <&mio_rst 13>;
+		};
+
+		soc-glue@5f800000 {
+			compatible = "socionext,uniphier-pro4-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-pro4-pinctrl";
+			};
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-pro4-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-pro4-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-pro4-reset";
+				#reset-cells = <1>;
+			};
+		};
+	};
+};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/src/arm/uniphier-pro5.dtsi b/src/arm/uniphier-pro5.dtsi
new file mode 100644
index 000000000000..dbc5e5333163
--- /dev/null
+++ b/src/arm/uniphier-pro5.dtsi
@@ -0,0 +1,410 @@
+/*
+ * Device Tree Source for UniPhier Pro5 SoC
+ *
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "socionext,uniphier-pro5";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
+		};
+	};
+
+	cpu_opp: opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@116667000 {
+			opp-hz = /bits/ 64 <116667000>;
+			clock-latency-ns = <300>;
+		};
+		opp@150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@175000000 {
+			opp-hz = /bits/ 64 <175000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@233334000 {
+			opp-hz = /bits/ 64 <233334000>;
+			clock-latency-ns = <300>;
+		};
+		opp@300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@350000000 {
+			opp-hz = /bits/ 64 <350000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@466667000 {
+			opp-hz = /bits/ 64 <466667000>;
+			clock-latency-ns = <300>;
+		};
+		opp@600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@933334000 {
+			opp-hz = /bits/ 64 <933334000>;
+			clock-latency-ns = <300>;
+		};
+		opp@1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <20000000>;
+		};
+
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		l2: l2-cache@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 190 4>, <0 191 4>;
+			cache-unified;
+			cache-size = <(2 * 1024 * 1024)>;
+			cache-sets = <512>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+			next-level-cache = <&l3>;
+		};
+
+		l3: l3-cache@500c8000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c8000 0x2000>, <0x503c8100 0x8>,
+			      <0x506c8000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>;
+			cache-unified;
+			cache-size = <(2 * 1024 * 1024)>;
+			cache-sets = <512>;
+			cache-line-size = <256>;
+			cache-level = <3>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 177 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			clock-frequency = <100000>;
+		};
+
+		/* i2c4 does not exist */
+
+		/* chip-internal connection for DMD */
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 25 4>;
+			clocks = <&peri_clk 9>;
+			clock-frequency = <400000>;
+		};
+
+		/* chip-internal connection for HDMI */
+		i2c6: i2c@58786000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58786000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 26 4>;
+			clocks = <&peri_clk 10>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59800000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		sdctrl@59810000 {
+			compatible = "socionext,uniphier-pro5-sdctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			sd_clk: clock {
+				compatible = "socionext,uniphier-pro5-sd-clock";
+				#clock-cells = <1>;
+			};
+
+			sd_rst: reset {
+				compatible = "socionext,uniphier-pro5-sd-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-pro5-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-pro5-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-pro5-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		soc-glue@5f800000 {
+			compatible = "socionext,uniphier-pro5-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-pro5-pinctrl";
+			};
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-pro5-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-pro5-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-pro5-reset";
+				#reset-cells = <1>;
+			};
+		};
+	};
+};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/src/arm/uniphier-pxs2-gentil.dts b/src/arm/uniphier-pxs2-gentil.dts
new file mode 100644
index 000000000000..373818ace086
--- /dev/null
+++ b/src/arm/uniphier-pxs2-gentil.dts
@@ -0,0 +1,90 @@
+/*
+ * Device Tree Source for UniPhier PXs2 Gentil Board
+ *
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-pxs2.dtsi"
+
+/ {
+	model = "UniPhier PXs2 Gentil Board";
+	compatible = "socionext,uniphier-pxs2-gentil",
+		     "socionext,uniphier-pxs2";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial2;
+		serial1 = &serial0;
+		serial2 = &serial1;
+		i2c0 = &i2c0;
+		i2c2 = &i2c2;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "st,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
diff --git a/src/arm/uniphier-pxs2-vodka.dts b/src/arm/uniphier-pxs2-vodka.dts
new file mode 100644
index 000000000000..51a3eacddfc6
--- /dev/null
+++ b/src/arm/uniphier-pxs2-vodka.dts
@@ -0,0 +1,79 @@
+/*
+ * Device Tree Source for UniPhier PXs2 Vodka Board
+ *
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-pxs2.dtsi"
+
+/ {
+	model = "UniPhier PXs2 Vodka Board";
+	compatible = "socionext,uniphier-pxs2-vodka", "socionext,uniphier-pxs2";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial2;
+		serial1 = &serial0;
+		serial2 = &serial1;
+		i2c0 = &i2c0;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/src/arm/uniphier-pxs2.dtsi b/src/arm/uniphier-pxs2.dtsi
new file mode 100644
index 000000000000..e9e031d63c1a
--- /dev/null
+++ b/src/arm/uniphier-pxs2.dtsi
@@ -0,0 +1,394 @@
+/*
+ * Device Tree Source for UniPhier PXs2 SoC
+ *
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "socionext,uniphier-pxs2";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
+		};
+	};
+
+	cpu_opp: opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		l2: l2-cache@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
+			cache-unified;
+			cache-size = <(1280 * 1024)>;
+			cache-sets = <512>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 177 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for DMD */
+		i2c4: i2c@58784000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58784000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 45 4>;
+			clocks = <&peri_clk 8>;
+			clock-frequency = <400000>;
+		};
+
+		/* chip-internal connection for STM */
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 25 4>;
+			clocks = <&peri_clk 9>;
+			clock-frequency = <400000>;
+		};
+
+		/* chip-internal connection for HDMI */
+		i2c6: i2c@58786000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58786000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 26 4>;
+			clocks = <&peri_clk 10>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59800000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		sdctrl@59810000 {
+			compatible = "socionext,uniphier-pxs2-sdctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			sd_clk: clock {
+				compatible = "socionext,uniphier-pxs2-sd-clock";
+				#clock-cells = <1>;
+			};
+
+			sd_rst: reset {
+				compatible = "socionext,uniphier-pxs2-sd-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-pxs2-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-pxs2-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-pxs2-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		soc-glue@5f800000 {
+			compatible = "socionext,uniphier-pxs2-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-pxs2-pinctrl";
+			};
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0xf04>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0xf04>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-pxs2-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-pxs2-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-pxs2-reset";
+				#reset-cells = <1>;
+			};
+		};
+	};
+};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/src/arm/uniphier-sld3-ref.dts b/src/arm/uniphier-sld3-ref.dts
new file mode 100644
index 000000000000..ac792ae07ae0
--- /dev/null
+++ b/src/arm/uniphier-sld3-ref.dts
@@ -0,0 +1,111 @@
+/*
+ * Device Tree Source for UniPhier sLD3 Reference Board
+ *
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-sld3.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier sLD3 Reference Board";
+	compatible = "socionext,uniphier-sld3-ref", "socionext,uniphier-sld3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000
+		       0xc0000000 0x20000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+	};
+};
+
+&ethsc {
+	interrupts = <0 49 4>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
diff --git a/src/arm/uniphier-sld3.dtsi b/src/arm/uniphier-sld3.dtsi
new file mode 100644
index 000000000000..9fad6bd2db8a
--- /dev/null
+++ b/src/arm/uniphier-sld3.dtsi
@@ -0,0 +1,296 @@
+/*
+ * Device Tree Source for UniPhier sLD3 SoC
+ *
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "socionext,uniphier-sld3";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24576000>;
+		};
+
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		timer@20000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20000200 0x20>;
+			interrupts = <1 11 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@20000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x20000600 0x20>;
+			interrupts = <1 13 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@20001000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x20001000 0x1000>,
+			      <0x20000100 0x100>;
+		};
+
+		l2: l2-cache@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>;
+			cache-unified;
+			cache-size = <(512 * 1024)>;
+			cache-sets = <256>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			clocks = <&sys_clk 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			clocks = <&sys_clk 0>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			clocks = <&sys_clk 0>;
+		};
+
+		i2c0: i2c@58400000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58400000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 1>;
+			clocks = <&sys_clk 1>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58480000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58480000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 1>;
+			clocks = <&sys_clk 1>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58500000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58500000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 1>;
+			clocks = <&sys_clk 1>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58580000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58580000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 1>;
+			clocks = <&sys_clk 1>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for DMD */
+		i2c4: i2c@58600000 {
+			compatible = "socionext,uniphier-i2c";
+			reg = <0x58600000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 45 1>;
+			clocks = <&sys_clk 1>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+		};
+
+		smpctrl@59800000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		mioctrl@59810000 {
+			compatible = "socionext,uniphier-sld3-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-sld3-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-sld3-mio-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		usb0: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <0 80 4>;
+			clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+				 <&mio_rst 12>;
+		};
+
+		usb1: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <0 81 4>;
+			clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+				 <&mio_rst 13>;
+		};
+
+		usb2: usb@5a820100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a820100 0x100>;
+			interrupts = <0 82 4>;
+			clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
+				 <&mio_rst 14>;
+		};
+
+		usb3: usb@5a830100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a830100 0x100>;
+			interrupts = <0 83 4>;
+			clocks = <&mio_clk 7>, <&mio_clk 11>, <&mio_clk 15>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 11>,
+				 <&mio_rst 15>;
+		};
+
+		sysctrl@f1840000 {
+			compatible = "socionext,uniphier-sld3-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0xf1840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-sld3-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-sld3-reset";
+				#reset-cells = <1>;
+			};
+		};
+	};
+};
diff --git a/src/arm/uniphier-sld8-ref.dts b/src/arm/uniphier-sld8-ref.dts
new file mode 100644
index 000000000000..a8291f988066
--- /dev/null
+++ b/src/arm/uniphier-sld8-ref.dts
@@ -0,0 +1,106 @@
+/*
+ * Device Tree Source for UniPhier sLD8 Reference Board
+ *
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-sld8.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier sLD8 Reference Board";
+	compatible = "socionext,uniphier-sld8-ref", "socionext,uniphier-sld8";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+	};
+};
+
+&ethsc {
+	interrupts = <0 48 4>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/src/arm/uniphier-sld8.dtsi b/src/arm/uniphier-sld8.dtsi
new file mode 100644
index 000000000000..b2c980ead7f0
--- /dev/null
+++ b/src/arm/uniphier-sld8.dtsi
@@ -0,0 +1,327 @@
+/*
+ * Device Tree Source for UniPhier sLD8 SoC
+ *
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "socionext,uniphier-sld8";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		l2: l2-cache@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>;
+			cache-unified;
+			cache-size = <(256 * 1024)>;
+			cache-sets = <256>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 29 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+		};
+
+		i2c0: i2c@58400000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58400000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58480000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58480000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for DMD */
+		i2c2: i2c@58500000 {
+			compatible = "socionext,uniphier-i2c";
+			reg = <0x58500000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			clock-frequency = <400000>;
+		};
+
+		i2c3: i2c@58580000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58580000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			clock-frequency = <100000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59800000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		mioctrl@59810000 {
+			compatible = "socionext,uniphier-sld8-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-sld8-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-sld8-mio-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-sld8-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-sld8-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-sld8-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		usb0: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <0 80 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+				 <&mio_rst 12>;
+		};
+
+		usb1: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <0 81 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+				 <&mio_rst 13>;
+		};
+
+		usb2: usb@5a820100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a820100 0x100>;
+			interrupts = <0 82 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
+				 <&mio_rst 14>;
+		};
+
+		soc-glue@5f800000 {
+			compatible = "socionext,uniphier-sld8-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-sld8-pinctrl";
+			};
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-sld8-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-sld8-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-sld8-reset";
+				#reset-cells = <1>;
+			};
+		};
+	};
+};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/src/arm/usb_a9260_common.dtsi b/src/arm/usb_a9260_common.dtsi
index 9beea8976584..7514b347cdd2 100644
--- a/src/arm/usb_a9260_common.dtsi
+++ b/src/arm/usb_a9260_common.dtsi
@@ -8,15 +8,6 @@
 
 / {
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -90,7 +81,7 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
@@ -119,7 +110,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 };
diff --git a/src/arm/usb_a9263.dts b/src/arm/usb_a9263.dts
index 8cc6edb29694..bfc48a272417 100644
--- a/src/arm/usb_a9263.dts
+++ b/src/arm/usb_a9263.dts
@@ -21,15 +21,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -147,7 +138,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 };
diff --git a/src/arm/usb_a9g20_common.dtsi b/src/arm/usb_a9g20_common.dtsi
index 0b3b36182fe5..088c2c3685ab 100644
--- a/src/arm/usb_a9g20_common.dtsi
+++ b/src/arm/usb_a9g20_common.dtsi
@@ -11,14 +11,15 @@
 
 / {
 	chosen {
-		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
 		reg = <0x20000000 0x4000000>;
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		rv3029c2@56 {
 			compatible = "rv3029c2";
 			reg = <0x56>;
diff --git a/src/arm/vexpress-v2p-ca15-tc1.dts b/src/arm/vexpress-v2p-ca15-tc1.dts
index 102838fcc588..15f4fd3f4695 100644
--- a/src/arm/vexpress-v2p-ca15-tc1.dts
+++ b/src/arm/vexpress-v2p-ca15-tc1.dts
@@ -81,7 +81,7 @@
 		#address-cells = <0>;
 		interrupt-controller;
 		reg = <0 0x2c001000 0 0x1000>,
-		      <0 0x2c002000 0 0x1000>,
+		      <0 0x2c002000 0 0x2000>,
 		      <0 0x2c004000 0 0x2000>,
 		      <0 0x2c006000 0 0x2000>;
 		interrupts = <1 9 0xf04>;
diff --git a/src/arm/vexpress-v2p-ca15_a7.dts b/src/arm/vexpress-v2p-ca15_a7.dts
index 0205c97efdef..bd107c5a0226 100644
--- a/src/arm/vexpress-v2p-ca15_a7.dts
+++ b/src/arm/vexpress-v2p-ca15_a7.dts
@@ -39,6 +39,7 @@
 			reg = <0>;
 			cci-control-port = <&cci_control1>;
 			cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
+			capacity-dmips-mhz = <1024>;
 		};
 
 		cpu1: cpu@1 {
@@ -47,6 +48,7 @@
 			reg = <1>;
 			cci-control-port = <&cci_control1>;
 			cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
+			capacity-dmips-mhz = <1024>;
 		};
 
 		cpu2: cpu@2 {
@@ -55,6 +57,7 @@
 			reg = <0x100>;
 			cci-control-port = <&cci_control2>;
 			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
+			capacity-dmips-mhz = <516>;
 		};
 
 		cpu3: cpu@3 {
@@ -63,6 +66,7 @@
 			reg = <0x101>;
 			cci-control-port = <&cci_control2>;
 			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
+			capacity-dmips-mhz = <516>;
 		};
 
 		cpu4: cpu@4 {
@@ -71,6 +75,7 @@
 			reg = <0x102>;
 			cci-control-port = <&cci_control2>;
 			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
+			capacity-dmips-mhz = <516>;
 		};
 
 		idle-states {
@@ -126,7 +131,7 @@
 		#address-cells = <0>;
 		interrupt-controller;
 		reg = <0 0x2c001000 0 0x1000>,
-		      <0 0x2c002000 0 0x1000>,
+		      <0 0x2c002000 0 0x2000>,
 		      <0 0x2c004000 0 0x2000>,
 		      <0 0x2c006000 0 0x2000>;
 		interrupts = <1 9 0xf04>;
diff --git a/src/arm/vf-colibri-eval-v3.dtsi b/src/arm/vf-colibri-eval-v3.dtsi
index a8a8e434fb27..1e0b823f7e8f 100644
--- a/src/arm/vf-colibri-eval-v3.dtsi
+++ b/src/arm/vf-colibri-eval-v3.dtsi
@@ -53,6 +53,12 @@
 	panel: panel {
 		compatible = "edt,et057090dhu";
 		backlight = <&bl>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dcu_out>;
+			};
+		};
 	};
 
 	reg_3v3: regulator-3v3 {
@@ -91,8 +97,13 @@
 &dcu0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_dcu0_1>;
-	fsl,panel = <&panel>;
 	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
 };
 
 &dspi1 {
diff --git a/src/arm/vf-colibri.dtsi b/src/arm/vf-colibri.dtsi
index b7417094dc11..21bfef957b68 100644
--- a/src/arm/vf-colibri.dtsi
+++ b/src/arm/vf-colibri.dtsi
@@ -108,6 +108,10 @@
 	status = "okay";
 };
 
+&edma1 {
+	status = "okay";
+};
+
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
diff --git a/src/arm/vf500.dtsi b/src/arm/vf500.dtsi
index a3824e61bd72..d7fdb2a7d97b 100644
--- a/src/arm/vf500.dtsi
+++ b/src/arm/vf500.dtsi
@@ -70,7 +70,7 @@
 			global_timer: timer@40002200 {
 				compatible = "arm,cortex-a9-global-timer";
 				reg = <0x40002200 0x20>;
-				interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 				interrupt-parent = <&intc>;
 				clocks = <&clks VF610_CLK_PLATFORM_BUS>;
 			};
diff --git a/src/arm/vf610-zii-dev-rev-b.dts b/src/arm/vf610-zii-dev-rev-b.dts
index 6c60b7f91104..958b4c42d320 100644
--- a/src/arm/vf610-zii-dev-rev-b.dts
+++ b/src/arm/vf610-zii-dev-rev-b.dts
@@ -85,187 +85,239 @@
 			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-		};
-
-		mdio_mux_2: mdio@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		mdio_mux_4: mdio@4 {
-			reg = <4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		mdio_mux_8: mdio@8 {
-			reg = <8>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	dsa {
-		compatible = "marvell,dsa";
-		#address-cells = <2>;
-		#size-cells = <0>;
-		dsa,ethernet = <&fec1>;
-		dsa,mii-bus = <&mdio_mux_1>;
 
-		/* 6352 - Primary - 7 ports */
-		switch0: switch@0-0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x00 0>;
-			eeprom-length = <512>;
-
-			port@0 {
+			switch0: switch0@0 {
+				compatible = "marvell,mv88e6085";
+				pinctrl-0 = <&pinctrl_gpio_switch0>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0>;
-				label = "lan0";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan1";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan2";
-			};
-
-			switch0port5: port@5 {
-				reg = <5>;
-				label = "dsa";
-				phy-mode = "rgmii-txid";
-				link = <&switch1port6
-					&switch2port9>;
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
+				dsa,member = <0 0>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						label = "lan0";
+						phy-handle = <&switch0phy0>;
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan1";
+						phy-handle = <&switch0phy1>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan2";
+						phy-handle = <&switch0phy2>;
+					};
+
+					switch0port5: port@5 {
+						reg = <5>;
+						label = "dsa";
+						phy-mode = "rgmii-txid";
+						link = <&switch1port6
+							&switch2port9>;
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+
+					port@6 {
+						reg = <6>;
+						label = "cpu";
+						ethernet = <&fec1>;
+						fixed-link {
+							speed = <100>;
+							full-duplex;
+						};
+					};
 				};
-			};
-
-			port@6 {
-				reg = <6>;
-				label = "cpu";
-
-				fixed-link {
-					speed = <100>;
-					full-duplex;
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					switch0phy0: switch0phy0@0 {
+						reg = <0>;
+						interrupt-parent = <&switch0>;
+						interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+					};
+					switch0phy1: switch1phy0@1 {
+						reg = <1>;
+						interrupt-parent = <&switch0>;
+						interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+					};
+					switch0phy2: switch1phy0@2 {
+						reg = <2>;
+						interrupt-parent = <&switch0>;
+						interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+					};
 				};
 			};
-
 		};
 
-		/* 6352 - Secondary - 7 ports */
-		switch1: switch@0-1 {
+		mdio_mux_2: mdio@2 {
+			reg = <2>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0x00 1>;
-			eeprom-length = <512>;
-			mii-bus = <&mdio_mux_2>;
 
-			port@0 {
+			switch1: switch1@0 {
+				compatible = "marvell,mv88e6085";
+				pinctrl-0 = <&pinctrl_gpio_switch1>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0>;
-				label = "lan3";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan4";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan5";
-			};
-
-			switch1port5: port@5 {
-				reg = <5>;
-				label = "dsa";
-				link = <&switch2port9>;
-				phy-mode = "rgmii-txid";
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
+				dsa,member = <0 1>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						label = "lan3";
+						phy-handle = <&switch1phy0>;
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan4";
+						phy-handle = <&switch1phy1>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan5";
+						phy-handle = <&switch1phy2>;
+					};
+
+					switch1port5: port@5 {
+						reg = <5>;
+						label = "dsa";
+						link = <&switch2port9>;
+						phy-mode = "rgmii-txid";
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+
+					switch1port6: port@6 {
+						reg = <6>;
+						label = "dsa";
+						phy-mode = "rgmii-txid";
+						link = <&switch0port5>;
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
 				};
-			};
-
-			switch1port6: port@6 {
-				reg = <6>;
-				label = "dsa";
-				phy-mode = "rgmii-txid";
-				link = <&switch0port5>;
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					switch1phy0: switch1phy0@0 {
+						reg = <0>;
+						interrupt-parent = <&switch1>;
+						interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+					};
+					switch1phy1: switch1phy0@1 {
+						reg = <1>;
+						interrupt-parent = <&switch1>;
+						interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+					};
+					switch1phy2: switch1phy0@2 {
+						reg = <2>;
+						interrupt-parent = <&switch1>;
+						interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+					};
 				};
 			};
 		};
 
-		/* 6185 - 10 ports */
-		switch2: switch@0-2 {
+		mdio_mux_4: mdio@4 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0x00 2>;
-			mii-bus = <&mdio_mux_4>;
+			reg = <4>;
 
-			port@0 {
+			switch2: switch2@0 {
+				compatible = "marvell,mv88e6085";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0>;
-				label = "lan6";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan7";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan8";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "optical3";
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-					link-gpios = <&gpio6 2
-						      GPIO_ACTIVE_HIGH>;
+				dsa,member = <0 2>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						label = "lan6";
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan7";
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan8";
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "optical3";
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+							link-gpios = <&gpio6 2
+							      GPIO_ACTIVE_HIGH>;
+						};
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "optical4";
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+							link-gpios = <&gpio6 3
+							      GPIO_ACTIVE_HIGH>;
+						};
+					};
+
+					switch2port9: port@9 {
+						reg = <9>;
+						label = "dsa";
+						phy-mode = "rgmii-txid";
+						link = <&switch1port5
+							&switch0port5>;
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
 				};
 			};
+		};
 
-			port@4 {
-				reg = <4>;
-				label = "optical4";
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-					link-gpios = <&gpio6 3
-						      GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			switch2port9: port@9 {
-				reg = <9>;
-				label = "dsa";
-				phy-mode = "rgmii-txid";
-				link = <&switch1port5
-					&switch0port5>;
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
+		mdio_mux_8: mdio@8 {
+			reg = <8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 	};
 
@@ -487,13 +539,6 @@
 	};
 };
 
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart0>;
@@ -624,6 +669,18 @@
 		>;
 	};
 
+	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+		fsl,pins = <
+			VF610_PAD_PTB5__GPIO_27		0x219d
+		>;
+	};
+
+	pinctrl_gpio_switch1: pinctrl-gpio-switch1 {
+		fsl,pins = <
+			VF610_PAD_PTB4__GPIO_26		0x219d
+		>;
+	};
+
 	pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset {
 		fsl,pins = <
 			 VF610_PAD_PTE14__GPIO_119	0x31c2
@@ -651,13 +708,6 @@
 		>;
 	};
 
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			VF610_PAD_PTA30__I2C3_SCL	0x37ff
-			VF610_PAD_PTA31__I2C3_SDA	0x37ff
-		>;
-	};
-
 	pinctrl_leds_debug: pinctrl-leds-debug {
 		fsl,pins = <
 			 VF610_PAD_PTD20__GPIO_74	0x31c2
diff --git a/src/arm/vf610m4.dtsi b/src/arm/vf610m4.dtsi
index 9ffe2eb68ed4..9f2c731839f2 100644
--- a/src/arm/vf610m4.dtsi
+++ b/src/arm/vf610m4.dtsi
@@ -42,6 +42,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include "skeleton.dtsi"
 #include "armv7-m.dtsi"
 #include "vfxxx.dtsi"
 
diff --git a/src/arm/vfxxx.dtsi b/src/arm/vfxxx.dtsi
index 2c13ec696ac5..e9d28474c26a 100644
--- a/src/arm/vfxxx.dtsi
+++ b/src/arm/vfxxx.dtsi
@@ -194,6 +194,9 @@
 				clocks = <&clks VF610_CLK_DSPI0>;
 				clock-names = "dspi";
 				spi-num-chipselects = <6>;
+				dmas = <&edma1 1 12>,
+					<&edma1 1 13>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -206,6 +209,9 @@
 				clocks = <&clks VF610_CLK_DSPI1>;
 				clock-names = "dspi";
 				spi-num-chipselects = <4>;
+				dmas = <&edma1 1 14>,
+					<&edma1 1 15>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -520,6 +526,12 @@
 				status = "disabled";
 			};
 
+			ocotp: ocotp@400a5000 {
+				compatible = "fsl,vf610-ocotp";
+				reg = <0x400a5000 0x1000>;
+				clocks = <&clks VF610_CLK_OCOTP>;
+			};
+
 			snvs0: snvs@400a7000 {
 			    compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
 				reg = <0x400a7000 0x2000>;
@@ -561,6 +573,9 @@
 				clocks = <&clks VF610_CLK_DSPI2>;
 				clock-names = "dspi";
 				spi-num-chipselects = <2>;
+				dmas = <&edma1 0 10>,
+					<&edma1 0 11>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -573,6 +588,9 @@
 				clocks = <&clks VF610_CLK_DSPI3>;
 				clock-names = "dspi";
 				spi-num-chipselects = <2>;
+				dmas = <&edma1 0 12>,
+					<&edma1 0 13>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
diff --git a/src/arm/zynq-7000.dtsi b/src/arm/zynq-7000.dtsi
index f283ff08381c..f3ac9bfe580e 100644
--- a/src/arm/zynq-7000.dtsi
+++ b/src/arm/zynq-7000.dtsi
@@ -10,9 +10,10 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
-/include/ "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "xlnx,zynq-7000";
 
 	cpus {
@@ -41,14 +42,15 @@
 		};
 	};
 
-	pmu {
+	pmu@f8891000 {
 		compatible = "arm,cortex-a9-pmu";
 		interrupts = <0 5 4>, <0 6 4>;
 		interrupt-parent = <&intc>;
-		reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >;
+		reg = <0xf8891000 0x1000>,
+		      <0xf8893000 0x1000>;
 	};
 
-	regulator_vccpint: fixedregulator@0 {
+	regulator_vccpint: fixedregulator {
 		compatible = "regulator-fixed";
 		regulator-name = "VCCPINT";
 		regulator-min-microvolt = <1000000>;
diff --git a/src/arm/zynq-microzed.dts b/src/arm/zynq-microzed.dts
new file mode 100644
index 000000000000..b9376a4904b4
--- /dev/null
+++ b/src/arm/zynq-microzed.dts
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2011 - 2014 Xilinx
+ * Copyright (C) 2016 Jagan Teki <jteki@openedev.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq MicroZED Development Board";
+	compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+};
+
+&pinctrl0 {
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO29", "MIO31", "MIO36";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+			       "MIO35", "MIO37", "MIO38", "MIO39";
+			bias-disable;
+		};
+	};
+};
diff --git a/src/arm/zynq-parallella.dts b/src/arm/zynq-parallella.dts
index 307ed201d658..64a6390fc501 100644
--- a/src/arm/zynq-parallella.dts
+++ b/src/arm/zynq-parallella.dts
@@ -28,7 +28,7 @@
 		serial0 = &uart1;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x40000000>;
 	};
diff --git a/src/arm/zynq-zc702.dts b/src/arm/zynq-zc702.dts
index e96959b2e67a..0cdad2cc8b78 100644
--- a/src/arm/zynq-zc702.dts
+++ b/src/arm/zynq-zc702.dts
@@ -24,7 +24,7 @@
 		serial0 = &uart1;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x40000000>;
 	};
diff --git a/src/arm/zynq-zc706.dts b/src/arm/zynq-zc706.dts
index be6a986bbbd8..ad4bb06dba25 100644
--- a/src/arm/zynq-zc706.dts
+++ b/src/arm/zynq-zc706.dts
@@ -24,7 +24,7 @@
 		serial0 = &uart1;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x40000000>;
 	};
diff --git a/src/arm/zynq-zed.dts b/src/arm/zynq-zed.dts
index 7250c1eac7f9..325379f7983c 100644
--- a/src/arm/zynq-zed.dts
+++ b/src/arm/zynq-zed.dts
@@ -23,7 +23,7 @@
 		serial0 = &uart1;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x20000000>;
 	};
diff --git a/src/arm/zynq-zybo.dts b/src/arm/zynq-zybo.dts
index d9e0f3e70671..590ec24b8749 100644
--- a/src/arm/zynq-zybo.dts
+++ b/src/arm/zynq-zybo.dts
@@ -23,7 +23,7 @@
 		serial0 = &uart1;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x20000000>;
 	};
diff --git a/src/arm64/allwinner/sun50i-a64-pine64-plus.dts b/src/arm64/allwinner/sun50i-a64-pine64-plus.dts
new file mode 100644
index 000000000000..790d14daaa6a
--- /dev/null
+++ b/src/arm64/allwinner/sun50i-a64-pine64-plus.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun50i-a64-pine64.dts"
+
+/ {
+	model = "Pine64+";
+	compatible = "pine64,pine64-plus", "allwinner,sun50i-a64";
+
+	/* TODO: Camera, Ethernet PHY, touchscreen, etc. */
+};
diff --git a/src/arm64/allwinner/sun50i-a64-pine64.dts b/src/arm64/allwinner/sun50i-a64-pine64.dts
new file mode 100644
index 000000000000..47095909d9d6
--- /dev/null
+++ b/src/arm64/allwinner/sun50i-a64-pine64.dts
@@ -0,0 +1,74 @@
+/*
+ * Copyright (c) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+
+/ {
+	model = "Pine64";
+	compatible = "pine64,pine64", "allwinner,sun50i-a64";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+};
+
+&i2c1_pins {
+	bias-pull-up;
+};
diff --git a/src/arm64/allwinner/sun50i-a64.dtsi b/src/arm64/allwinner/sun50i-a64.dtsi
new file mode 100644
index 000000000000..e0dcab8eb035
--- /dev/null
+++ b/src/arm64/allwinner/sun50i-a64.dtsi
@@ -0,0 +1,261 @@
+/*
+ * Copyright (C) 2016 ARM Ltd.
+ * based on the Allwinner H3 dtsi:
+ *    Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <3>;
+			enable-method = "psci";
+		};
+	};
+
+	osc24M: osc24M_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "osc24M";
+	};
+
+	osc32k: osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "osc32k";
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ccu: clock@01c20000 {
+			compatible = "allwinner,sun50i-a64-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun50i-a64-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu 58>;
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			i2c1_pins: i2c1_pins {
+				pins = "PH2", "PH3";
+				function = "i2c1";
+			};
+
+			uart0_pins_a: uart0@0 {
+				pins = "PB8", "PB9";
+				function = "uart0";
+			};
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu 67>;
+			resets = <&ccu 46>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu 68>;
+			resets = <&ccu 47>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu 69>;
+			resets = <&ccu 48>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu 70>;
+			resets = <&ccu 49>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu 71>;
+			resets = <&ccu 50>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu 63>;
+			resets = <&ccu 42>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu 64>;
+			resets = <&ccu 43>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu 65>;
+			resets = <&ccu 44>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		rtc: rtc@1f00000 {
+			compatible = "allwinner,sun6i-a31-rtc";
+			reg = <0x01f00000 0x54>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
diff --git a/src/arm64/altera/socfpga_stratix10.dtsi b/src/arm64/altera/socfpga_stratix10.dtsi
index 445aa678f914..c2b9bcb0ef61 100644
--- a/src/arm64/altera/socfpga_stratix10.dtsi
+++ b/src/arm64/altera/socfpga_stratix10.dtsi
@@ -255,10 +255,10 @@
 		/* Local timer */
 		timer {
 			compatible = "arm,armv8-timer";
-			interrupts = <1 13 0xf01>,
-				     <1 14 0xf01>,
-				     <1 11 0xf01>,
-				     <1 10 0xf01>;
+			interrupts = <1 13 0xf08>,
+				     <1 14 0xf08>,
+				     <1 11 0xf08>,
+				     <1 10 0xf08>;
 		};
 
 		timer0: timer0@ffc03000 {
diff --git a/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi b/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi
new file mode 100644
index 000000000000..7a078bef04cd
--- /dev/null
+++ b/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi
@@ -0,0 +1,190 @@
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* Common DTSI for same Amlogic Q200/Q201 and P230/P231 boards using either
+ * the pin-compatible S912 (GXM) or S905D (GXL) SoCs.
+ */
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+};
+
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&ethmac {
+	status = "okay";
+};
diff --git a/src/arm64/amlogic/meson-gx.dtsi b/src/arm64/amlogic/meson-gx.dtsi
new file mode 100644
index 000000000000..0cbe24b49710
--- /dev/null
+++ b/src/arm64/amlogic/meson-gx.dtsi
@@ -0,0 +1,394 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 16 MiB reserved for Hardware ROM Firmware */
+		hwrom_reserved: hwrom@0 {
+			reg = <0x0 0x0 0x0 0x1000000>;
+			no-map;
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@10000000 {
+			reg = <0x0 0x10000000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	firmware {
+		sm: secure-monitor {
+			compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm";
+		};
+	};
+
+	efuse: efuse {
+		compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sn: sn@14 {
+			reg = <0x14 0x10>;
+		};
+
+		eth_mac: eth_mac@34 {
+			reg = <0x34 0x10>;
+		};
+
+		bid: bid@46 {
+			reg = <0x46 0x30>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cbus: cbus@c1100000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc1100000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
+
+			reset: reset-controller@4404 {
+				compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset";
+				reg = <0x0 0x04404 0x0 0x20>;
+				#reset-cells = <1>;
+			};
+
+			uart_A: serial@84c0 {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x84c0 0x0 0x14>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+
+			uart_B: serial@84dc {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x84dc 0x0 0x14>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+
+			i2c_A: i2c@8500 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x08500 0x0 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			pwm_ab: pwm@8550 {
+				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x08550 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@8650 {
+				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x08650 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ef: pwm@86c0 {
+				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x086c0 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			uart_C: serial@8700 {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x8700 0x0 0x14>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+
+			i2c_B: i2c@87c0 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x087c0 0x0 0x20>;
+				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c_C: i2c@87e0 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x087e0 0x0 0x20>;
+				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			watchdog@98d0 {
+				compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
+				reg = <0x0 0x098d0 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+		};
+
+		gic: interrupt-controller@c4301000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xc4301000 0 0x1000>,
+			      <0x0 0xc4302000 0 0x2000>,
+			      <0x0 0xc4304000 0 0x2000>,
+			      <0x0 0xc4306000 0 0x2000>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+		};
+
+		aobus: aobus@c8100000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc8100000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
+
+			uart_AO: serial@4c0 {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x004c0 0x0 0x14>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+
+			ir: ir@580 {
+				compatible = "amlogic,meson-gxbb-ir";
+				reg = <0x0 0x00580 0x0 0x40>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+		};
+
+		periphs: periphs@c8834000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc8834000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
+
+			rng {
+				compatible = "amlogic,meson-rng";
+				reg = <0x0 0x0 0x0 0x4>;
+			};
+		};
+
+
+		hiubus: hiubus@c883c000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc883c000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
+
+			mailbox: mailbox@404 {
+				compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
+				reg = <0 0x404 0 0x4c>;
+				interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
+					     <0 209 IRQ_TYPE_EDGE_RISING>,
+					     <0 210 IRQ_TYPE_EDGE_RISING>;
+				#mbox-cells = <1>;
+			};
+		};
+
+		ethmac: ethernet@c9410000 {
+			compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+			reg = <0x0 0xc9410000 0x0 0x10000
+			       0x0 0xc8834540 0x0 0x4>;
+			interrupts = <0 8 1>;
+			interrupt-names = "macirq";
+			phy-mode = "rgmii";
+			status = "disabled";
+		};
+
+		apb: apb@d0000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xd0000000 0x0 0x200000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
+
+			sd_emmc_a: mmc@70000 {
+				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+				reg = <0x0 0x70000 0x0 0x2000>;
+				interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			sd_emmc_b: mmc@72000 {
+				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+				reg = <0x0 0x72000 0x0 0x2000>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			sd_emmc_c: mmc@74000 {
+				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+				reg = <0x0 0x74000 0x0 0x2000>;
+				interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+		};
+
+		vpu: vpu@d0100000 {
+			compatible = "amlogic,meson-gx-vpu";
+			reg = <0x0 0xd0100000 0x0 0x100000>,
+			      <0x0 0xc883c000 0x0 0x1000>,
+			      <0x0 0xc8838000 0x0 0x1000>;
+			reg-names = "vpu", "hhi", "dmc";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* CVBS VDAC output port */
+			cvbs_vdac_port: port@0 {
+				reg = <0>;
+			};
+		};
+	};
+};
diff --git a/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts b/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts
new file mode 100644
index 000000000000..4cbd626a9e88
--- /dev/null
+++ b/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -0,0 +1,247 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@kernel.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "nexbox,a95x", "amlogic,meson-gxbb";
+	model = "NEXBOX A95X";
+	
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		blue {
+			label = "a95x:system-status";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		button@0 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vddio_card: gpio-regulator {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+
+		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
+		states = <1800000 0
+			  3300000 1>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rmii_pins>;
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_card>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
diff --git a/src/arm64/amlogic/meson-gxbb-odroidc2.dts b/src/arm64/amlogic/meson-gxbb-odroidc2.dts
index 7f2c6747a71e..c59403adb387 100644
--- a/src/arm64/amlogic/meson-gxbb-odroidc2.dts
+++ b/src/arm64/amlogic/meson-gxbb-odroidc2.dts
@@ -45,6 +45,7 @@
 /dts-v1/;
 
 #include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb";
@@ -62,8 +63,171 @@
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
+
+	usb_otg_pwr: regulator-usb-pwrs {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_OTG_PWR";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		blue {
+			label = "c2:blue:alive";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	tflash_vdd: regulator-tflash_vdd {
+		/*
+		 * signal name from schematics: TFLASH_VDD_EN
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "TFLASH_VDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio_ao GPIOAO_12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	tf_io: gpio-regulator-tf_io {
+		compatible = "regulator-gpio";
+
+		regulator-name = "TF_IO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		/*
+		 * signal name from schematics: TF_3V3N_1V8_EN
+		 */
+		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0
+			  1800000 1>;
+	};
+
+	vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&scpi_clocks {
+	status = "disabled";
 };
 
 &uart_AO {
 	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			reg = <0>;
+			eee-broken-1000t;
+		};
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_otg_pwr>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* SD */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+
+	vmmc-supply = <&tflash_vdd>;
+	vqmmc-supply = <&tf_io>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	cap-sd-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc3v3>;
+	vqmmc-supply = <&vcc1v8>;
 };
diff --git a/src/arm64/amlogic/meson-gxbb-p200.dts b/src/arm64/amlogic/meson-gxbb-p200.dts
index 62979076e250..03e3d76626dd 100644
--- a/src/arm64/amlogic/meson-gxbb-p200.dts
+++ b/src/arm64/amlogic/meson-gxbb-p200.dts
@@ -50,3 +50,9 @@
 	compatible = "amlogic,p200", "amlogic,meson-gxbb";
 	model = "Amlogic Meson GXBB P200 Development Board";
 };
+
+&i2c_B {
+	status = "okay";
+	pinctrl-0 = <&i2c_b_pins>;
+	pinctrl-names = "default";
+};
diff --git a/src/arm64/amlogic/meson-gxbb-p20x.dtsi b/src/arm64/amlogic/meson-gxbb-p20x.dtsi
index bf7ff1d41851..4a96e0f6f926 100644
--- a/src/arm64/amlogic/meson-gxbb-p20x.dtsi
+++ b/src/arm64/amlogic/meson-gxbb-p20x.dtsi
@@ -57,9 +57,196 @@
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
+
+	usb_pwr: regulator-usb-pwrs {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_PWR";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		/* signal name in schematic: USB_PWR_EN */
+		gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vddio_card: gpio-regulator {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+
+		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
+		states = <1800000 0
+			  3300000 1>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
 };
 
 /* This UART is brought out to the DB9 connector */
 &uart_AO {
 	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_pwr>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_card>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
 };
diff --git a/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi b/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi
index 012cdccc8a35..e59ad308192f 100644
--- a/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi
@@ -52,8 +52,157 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	usb_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB0_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>,
+				<&gpio GPIOX_20 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
 };
 
 &uart_AO {
 	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_vbus>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins &sdio_irq_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+
+	vmmc-supply = <&vcc_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vmmcq-sumpply = <&vcc_1v8>;
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
 };
diff --git a/src/arm64/amlogic/meson-gxbb.dtsi b/src/arm64/amlogic/meson-gxbb.dtsi
index 832815d80462..b35307321b63 100644
--- a/src/arm64/amlogic/meson-gxbb.dtsi
+++ b/src/arm64/amlogic/meson-gxbb.dtsi
@@ -40,139 +40,473 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "meson-gx.dtsi"
+#include <dt-bindings/gpio/meson-gxbb-gpio.h>
+#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
+#include <dt-bindings/clock/gxbb-clkc.h>
+#include <dt-bindings/clock/gxbb-aoclkc.h>
+#include <dt-bindings/reset/gxbb-aoclkc.h>
 
 / {
 	compatible = "amlogic,meson-gxbb";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
 
-	cpus {
-		#address-cells = <0x2>;
-		#size-cells = <0x0>;
+	scpi {
+		compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
+		mboxes = <&mailbox 1 &mailbox 2>;
+		shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
 
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
-			reg = <0x0 0x0>;
-			enable-method = "psci";
+		scpi_clocks: clocks {
+			compatible = "arm,scpi-clocks";
+
+			scpi_dvfs: scpi_clocks@0 {
+				compatible = "arm,scpi-dvfs-clocks";
+				#clock-cells = <1>;
+				clock-indices = <0>;
+				clock-output-names = "vcpu";
+			};
 		};
 
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
-			reg = <0x0 0x1>;
-			enable-method = "psci";
+		scpi_sensors: sensors {
+			compatible = "arm,scpi-sensors";
+			#thermal-sensor-cells = <1>;
 		};
+	};
 
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
-			reg = <0x0 0x2>;
-			enable-method = "psci";
+	soc {
+		usb0_phy: phy@c0000000 {
+			compatible = "amlogic,meson-gxbb-usb2-phy";
+			#phy-cells = <0>;
+			reg = <0x0 0xc0000000 0x0 0x20>;
+			resets = <&reset RESET_USB_OTG>;
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+			clock-names = "usb_general", "usb";
+			status = "disabled";
 		};
 
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
-			reg = <0x0 0x3>;
-			enable-method = "psci";
+		usb1_phy: phy@c0000020 {
+			compatible = "amlogic,meson-gxbb-usb2-phy";
+			#phy-cells = <0>;
+			reg = <0x0 0xc0000020 0x0 0x20>;
+			resets = <&reset RESET_USB_OTG>;
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
+			clock-names = "usb_general", "usb";
+			status = "disabled";
+		};
+
+		sram: sram@c8000000 {
+			compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
+			reg = <0x0 0xc8000000 0x0 0x14000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0xc8000000 0x14000>;
+
+			cpu_scp_lpri: scp-shmem@0 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
+				reg = <0x13000 0x400>;
+			};
+
+			cpu_scp_hpri: scp-shmem@200 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
+				reg = <0x13400 0x400>;
+			};
+		};
+
+		usb0: usb@c9000000 {
+			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
+			reg = <0x0 0xc9000000 0x0 0x40000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+			clock-names = "otg";
+			phys = <&usb0_phy>;
+			phy-names = "usb2-phy";
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		usb1: usb@c9100000 {
+			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
+			reg = <0x0 0xc9100000 0x0 0x40000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+			clock-names = "otg";
+			phys = <&usb1_phy>;
+			phy-names = "usb2-phy";
+			dr_mode = "host";
+			status = "disabled";
 		};
 	};
+};
+
+&cpu0 {
+	clocks = <&scpi_dvfs 0>;
+};
+
+&cpu1 {
+	clocks = <&scpi_dvfs 0>;
+};
+
+&cpu2 {
+	clocks = <&scpi_dvfs 0>;
+};
 
-	arm-pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+&cpu3 {
+	clocks = <&scpi_dvfs 0>;
+};
+
+&cbus {
+	spifc: spi@8c80 {
+		compatible = "amlogic,meson-gxbb-spifc";
+		reg = <0x0 0x08c80 0x0 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkc CLKID_SPI>;
+		status = "disabled";
 	};
+};
 
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
+&ethmac {
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_FCLK_DIV2>,
+		 <&clkc CLKID_MPLL2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1";
+};
+
+&aobus {
+	pinctrl_aobus: pinctrl@14 {
+		compatible = "amlogic,meson-gxbb-aobus-pinctrl";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio_ao: bank@14 {
+			reg = <0x0 0x00014 0x0 0x8>,
+			      <0x0 0x0002c 0x0 0x4>,
+			      <0x0 0x00024 0x0 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+			};
+		};
+
+		remote_input_ao_pins: remote_input_ao {
+			mux {
+				groups = "remote_input_ao";
+				function = "remote_input_ao";
+			};
+		};
+
+		i2c_ao_pins: i2c_ao {
+			mux {
+				groups = "i2c_sck_ao",
+				       "i2c_sda_ao";
+				function = "i2c_ao";
+			};
+		};
+
+		pwm_ao_a_3_pins: pwm_ao_a_3 {
+			mux {
+				groups = "pwm_ao_a_3";
+				function = "pwm_ao_a_3";
+			};
+		};
+
+		pwm_ao_a_6_pins: pwm_ao_a_6 {
+			mux {
+				groups = "pwm_ao_a_6";
+				function = "pwm_ao_a_6";
+			};
+		};
+
+		pwm_ao_a_12_pins: pwm_ao_a_12 {
+			mux {
+				groups = "pwm_ao_a_12";
+				function = "pwm_ao_a_12";
+			};
+		};
+
+		pwm_ao_b_pins: pwm_ao_b {
+			mux {
+				groups = "pwm_ao_b";
+				function = "pwm_ao_b";
+			};
+		};
 	};
 
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
-			     <GIC_PPI 14
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
-			     <GIC_PPI 11
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
-			     <GIC_PPI 10
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>;
+	clkc_AO: clock-controller@040 {
+		compatible = "amlogic,gxbb-aoclkc";
+		reg = <0x0 0x00040 0x0 0x4>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
-	xtal: xtal-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "xtal";
-		#clock-cells = <0>;
+	pwm_ab_AO: pwm@550 {
+		compatible = "amlogic,meson-gxbb-pwm";
+		reg = <0x0 0x0550 0x0 0x10>;
+		#pwm-cells = <3>;
+		status = "disabled";
 	};
 
-	soc {
-		compatible = "simple-bus";
+	i2c_AO: i2c@500 {
+		compatible = "amlogic,meson-gxbb-i2c";
+		reg = <0x0 0x500 0x0 0x20>;
+		interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&clkc CLKID_AO_I2C>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
+
+&periphs {
+	pinctrl_periphs: pinctrl@4b0 {
+		compatible = "amlogic,meson-gxbb-periphs-pinctrl";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
 
-		cbus: cbus@c1100000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xc1100000 0x0 0x100000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
-
-			uart_A: serial@84c0 {
-				compatible = "amlogic,meson-uart";
-				reg = <0x0 0x084c0 0x0 0x14>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>;
-				status = "disabled";
-			};
-		};
-
-		gic: interrupt-controller@c4301000 {
-			compatible = "arm,gic-400";
-			reg = <0x0 0xc4301000 0 0x1000>,
-			      <0x0 0xc4302000 0 0x2000>,
-			      <0x0 0xc4304000 0 0x2000>,
-			      <0x0 0xc4306000 0 0x2000>;
-			interrupt-controller;
-			interrupts = <GIC_PPI 9
-				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-		};
-
-		aobus: aobus@c8100000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xc8100000 0x0 0x100000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
-
-			uart_AO: serial@4c0 {
-				compatible = "amlogic,meson-uart";
-				reg = <0x0 0x004c0 0x0 0x14>;
-				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>;
-				status = "disabled";
-			};
-		};
-
-		apb: apb@d0000000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xd0000000 0x0 0x200000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
+		gpio: bank@4b0 {
+			reg = <0x0 0x004b0 0x0 0x28>,
+			      <0x0 0x004e8 0x0 0x14>,
+			      <0x0 0x00120 0x0 0x14>,
+			      <0x0 0x00430 0x0 0x40>;
+			reg-names = "mux", "pull", "pull-enable", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		emmc_pins: emmc {
+			mux {
+				groups = "emmc_nand_d07",
+				       "emmc_cmd",
+				       "emmc_clk",
+				       "emmc_ds";
+				function = "emmc";
+			};
+		};
+
+		nor_pins: nor {
+			mux {
+				groups = "nor_d",
+				       "nor_q",
+				       "nor_c",
+				       "nor_cs";
+				function = "nor";
+			};
+		};
+
+		sdcard_pins: sdcard {
+			mux {
+				groups = "sdcard_d0",
+				       "sdcard_d1",
+				       "sdcard_d2",
+				       "sdcard_d3",
+				       "sdcard_cmd",
+				       "sdcard_clk";
+				function = "sdcard";
+			};
+		};
+
+		sdio_pins: sdio {
+			mux {
+				groups = "sdio_d0",
+				       "sdio_d1",
+				       "sdio_d2",
+				       "sdio_d3",
+				       "sdio_cmd",
+				       "sdio_clk";
+				function = "sdio";
+			};
+		};
+
+		sdio_irq_pins: sdio_irq {
+			mux {
+				groups = "sdio_irq";
+				function = "sdio";
+			};
+		};
+
+		uart_a_pins: uart_a {
+			mux {
+				groups = "uart_tx_a",
+				       "uart_rx_a";
+				function = "uart_a";
+			};
+		};
+
+		uart_b_pins: uart_b {
+			mux {
+				groups = "uart_tx_b",
+				       "uart_rx_b";
+				function = "uart_b";
+			};
+		};
+
+		uart_c_pins: uart_c {
+			mux {
+				groups = "uart_tx_c",
+				       "uart_rx_c";
+				function = "uart_c";
+			};
+		};
+
+		i2c_a_pins: i2c_a {
+			mux {
+				groups = "i2c_sck_a",
+				       "i2c_sda_a";
+				function = "i2c_a";
+			};
+		};
+
+		i2c_b_pins: i2c_b {
+			mux {
+				groups = "i2c_sck_b",
+				       "i2c_sda_b";
+				function = "i2c_b";
+			};
+		};
+
+		i2c_c_pins: i2c_c {
+			mux {
+				groups = "i2c_sck_c",
+				       "i2c_sda_c";
+				function = "i2c_c";
+			};
+		};
+
+		eth_rgmii_pins: eth-rgmii {
+			mux {
+				groups = "eth_mdio",
+				       "eth_mdc",
+				       "eth_clk_rx_clk",
+				       "eth_rx_dv",
+				       "eth_rxd0",
+				       "eth_rxd1",
+				       "eth_rxd2",
+				       "eth_rxd3",
+				       "eth_rgmii_tx_clk",
+				       "eth_tx_en",
+				       "eth_txd0",
+				       "eth_txd1",
+				       "eth_txd2",
+				       "eth_txd3";
+				function = "eth";
+			};
+		};
+
+		eth_rmii_pins: eth-rmii {
+			mux {
+				groups = "eth_mdio",
+				       "eth_mdc",
+				       "eth_clk_rx_clk",
+				       "eth_rx_dv",
+				       "eth_rxd0",
+				       "eth_rxd1",
+				       "eth_tx_en",
+				       "eth_txd0",
+				       "eth_txd1";
+				function = "eth";
+			};
+		};
+
+		pwm_a_x_pins: pwm_a_x {
+			mux {
+				groups = "pwm_a_x";
+				function = "pwm_a_x";
+			};
+		};
+
+		pwm_a_y_pins: pwm_a_y {
+			mux {
+				groups = "pwm_a_y";
+				function = "pwm_a_y";
+			};
+		};
+
+		pwm_b_pins: pwm_b {
+			mux {
+				groups = "pwm_b";
+				function = "pwm_b";
+			};
+		};
+
+		pwm_d_pins: pwm_d {
+			mux {
+				groups = "pwm_d";
+				function = "pwm_d";
+			};
+		};
+
+		pwm_e_pins: pwm_e {
+			mux {
+				groups = "pwm_e";
+				function = "pwm_e";
+			};
+		};
+
+		pwm_f_x_pins: pwm_f_x {
+			mux {
+				groups = "pwm_f_x";
+				function = "pwm_f_x";
+			};
+		};
+
+		pwm_f_y_pins: pwm_f_y {
+			mux {
+				groups = "pwm_f_y";
+				function = "pwm_f_y";
+			};
 		};
 	};
 };
+
+&hiubus {
+	clkc: clock-controller@0 {
+		compatible = "amlogic,gxbb-clkc";
+		#clock-cells = <1>;
+		reg = <0x0 0x0 0x0 0x3db>;
+	};
+};
+
+&i2c_A {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&sd_emmc_a {
+	clocks = <&clkc CLKID_SD_EMMC_A>,
+		 <&xtal>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+};
+
+&sd_emmc_b {
+	clocks = <&clkc CLKID_SD_EMMC_B>,
+		 <&xtal>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+};
+
+&sd_emmc_c {
+	clocks = <&clkc CLKID_SD_EMMC_C>,
+		 <&xtal>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+};
+
+&vpu {
+	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
+};
diff --git a/src/arm64/amlogic/meson-gxl-nexbox-a95x.dts b/src/arm64/amlogic/meson-gxl-nexbox-a95x.dts
new file mode 100644
index 000000000000..cea4a3eded9b
--- /dev/null
+++ b/src/arm64/amlogic/meson-gxl-nexbox-a95x.dts
@@ -0,0 +1,221 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@kernel.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "nexbox,a95x", "amlogic,s905x", "amlogic,meson-gxl";
+	model = "NEXBOX A95X (S905X)";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	vddio_card: gpio-regulator {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+
+		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
+		states = <1800000 0
+			  3300000 1>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&ethmac {
+	status = "okay";
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_card>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
diff --git a/src/arm64/amlogic/meson-gxl-s905d-p230.dts b/src/arm64/amlogic/meson-gxl-s905d-p230.dts
new file mode 100644
index 000000000000..f66939cacd37
--- /dev/null
+++ b/src/arm64/amlogic/meson-gxl-s905d-p230.dts
@@ -0,0 +1,77 @@
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905d.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "amlogic,p230", "amlogic,s905d", "amlogic,meson-gxl";
+	model = "Amlogic Meson GXL (S905D) P230 Development Board";
+};
+
+/* P230 has exclusive choice between internal or external PHY */
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	/* Select external PHY by default */
+	phy-handle = <&external_phy>;
+
+	/* External PHY reset is shared with internal PHY Led signals */
+	snps,reset-gpio = <&gpio GPIOZ_14 0>;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-active-low;
+
+	/* External PHY is in RGMII */
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		max-speed = <1000>;
+	};
+};
diff --git a/src/arm64/amlogic/meson-gxl-s905d-p231.dts b/src/arm64/amlogic/meson-gxl-s905d-p231.dts
new file mode 100644
index 000000000000..95992cf1fe61
--- /dev/null
+++ b/src/arm64/amlogic/meson-gxl-s905d-p231.dts
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905d.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "amlogic,p231", "amlogic,s905d", "amlogic,meson-gxl";
+	model = "Amlogic Meson GXL (S905D) P231 Development Board";
+};
+
+/* P231 has only internal PHY port */
+&ethmac {
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
diff --git a/src/arm64/amlogic/meson-gxl-s905d.dtsi b/src/arm64/amlogic/meson-gxl-s905d.dtsi
new file mode 100644
index 000000000000..615308e55576
--- /dev/null
+++ b/src/arm64/amlogic/meson-gxl-s905d.dtsi
@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "meson-gxl.dtsi"
+
+/ {
+	compatible = "amlogic,s905d", "amlogic,meson-gxl";
+};
diff --git a/src/arm64/amlogic/meson-gxl-s905x-p212.dts b/src/arm64/amlogic/meson-gxl-s905x-p212.dts
new file mode 100644
index 000000000000..9639f012b02b
--- /dev/null
+++ b/src/arm64/amlogic/meson-gxl-s905x-p212.dts
@@ -0,0 +1,69 @@
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
+	model = "Amlogic Meson GXL (S905X) P212 Development Board";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
+	status = "okay";
+};
diff --git a/src/arm64/amlogic/meson-gxl-s905x.dtsi b/src/arm64/amlogic/meson-gxl-s905x.dtsi
new file mode 100644
index 000000000000..08237ee1e362
--- /dev/null
+++ b/src/arm64/amlogic/meson-gxl-s905x.dtsi
@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "meson-gxl.dtsi"
+
+/ {
+	compatible = "amlogic,s905x", "amlogic,meson-gxl";
+};
+
+/* S905X Only has access to its internal PHY */
+&ethmac {
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
diff --git a/src/arm64/amlogic/meson-gxl.dtsi b/src/arm64/amlogic/meson-gxl.dtsi
new file mode 100644
index 000000000000..69216246275d
--- /dev/null
+++ b/src/arm64/amlogic/meson-gxl.dtsi
@@ -0,0 +1,305 @@
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "meson-gx.dtsi"
+#include <dt-bindings/clock/gxbb-clkc.h>
+#include <dt-bindings/gpio/meson-gxl-gpio.h>
+
+/ {
+	compatible = "amlogic,meson-gxl";
+};
+
+&ethmac {
+	reg = <0x0 0xc9410000 0x0 0x10000
+	       0x0 0xc8834540 0x0 0x4>;
+
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_FCLK_DIV2>,
+		 <&clkc CLKID_MPLL2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1";
+
+	mdio0: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+	};
+};
+
+&aobus {
+	pinctrl_aobus: pinctrl@14 {
+		compatible = "amlogic,meson-gxl-aobus-pinctrl";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio_ao: bank@14 {
+			reg = <0x0 0x00014 0x0 0x8>,
+			      <0x0 0x0002c 0x0 0x4>,
+			      <0x0 0x00024 0x0 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+			};
+		};
+
+		remote_input_ao_pins: remote_input_ao {
+			mux {
+				groups = "remote_input_ao";
+				function = "remote_input_ao";
+			};
+		};
+	};
+};
+
+&periphs {
+	pinctrl_periphs: pinctrl@4b0 {
+		compatible = "amlogic,meson-gxl-periphs-pinctrl";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio: bank@4b0 {
+			reg = <0x0 0x004b0 0x0 0x28>,
+			      <0x0 0x004e8 0x0 0x14>,
+			      <0x0 0x00120 0x0 0x14>,
+			      <0x0 0x00430 0x0 0x40>;
+			reg-names = "mux", "pull", "pull-enable", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		emmc_pins: emmc {
+			mux {
+				groups = "emmc_nand_d07",
+				       "emmc_cmd",
+				       "emmc_clk",
+				       "emmc_ds";
+				function = "emmc";
+			};
+		};
+
+		sdcard_pins: sdcard {
+			mux {
+				groups = "sdcard_d0",
+				       "sdcard_d1",
+				       "sdcard_d2",
+				       "sdcard_d3",
+				       "sdcard_cmd",
+				       "sdcard_clk";
+				function = "sdcard";
+			};
+		};
+
+		sdio_pins: sdio {
+			mux {
+				groups = "sdio_d0",
+				       "sdio_d1",
+				       "sdio_d2",
+				       "sdio_d3",
+				       "sdio_cmd",
+				       "sdio_clk";
+				function = "sdio";
+			};
+		};
+
+		sdio_irq_pins: sdio_irq {
+			mux {
+				groups = "sdio_irq";
+				function = "sdio";
+			};
+		};
+
+		uart_a_pins: uart_a {
+			mux {
+				groups = "uart_tx_a",
+				       "uart_rx_a";
+				function = "uart_a";
+			};
+		};
+
+		uart_b_pins: uart_b {
+			mux {
+				groups = "uart_tx_b",
+				       "uart_rx_b";
+				function = "uart_b";
+			};
+		};
+
+		uart_c_pins: uart_c {
+			mux {
+				groups = "uart_tx_c",
+				       "uart_rx_c";
+				function = "uart_c";
+			};
+		};
+
+		i2c_a_pins: i2c_a {
+			mux {
+				groups = "i2c_sck_a",
+				     "i2c_sda_a";
+				function = "i2c_a";
+			};
+		};
+
+		i2c_b_pins: i2c_b {
+			mux {
+				groups = "i2c_sck_b",
+				      "i2c_sda_b";
+				function = "i2c_b";
+			};
+		};
+
+		i2c_c_pins: i2c_c {
+			mux {
+				groups = "i2c_sck_c",
+				      "i2c_sda_c";
+				function = "i2c_c";
+			};
+		};
+
+		eth_pins: eth_c {
+			mux {
+				groups = "eth_mdio",
+				       "eth_mdc",
+				       "eth_clk_rx_clk",
+				       "eth_rx_dv",
+				       "eth_rxd0",
+				       "eth_rxd1",
+				       "eth_rxd2",
+				       "eth_rxd3",
+				       "eth_rgmii_tx_clk",
+				       "eth_tx_en",
+				       "eth_txd0",
+				       "eth_txd1",
+				       "eth_txd2",
+				       "eth_txd3";
+				function = "eth";
+			};
+		};
+
+		pwm_e_pins: pwm_e {
+			mux {
+				groups = "pwm_e";
+				function = "pwm_e";
+			};
+		};
+	};
+
+	eth-phy-mux {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x55c 0x0 0x4>;
+		mux-mask = <0xffffffff>;
+		mdio-parent-bus = <&mdio0>;
+
+		internal_mdio: mdio@e40908ff {
+			reg = <0xe40908ff>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			internal_phy: ethernet-phy@8 {
+				compatible = "ethernet-phy-id0181.4400", "ethernet-phy-ieee802.3-c22";
+				reg = <8>;
+				max-speed = <100>;
+			};
+		};
+
+		external_mdio: mdio@2009087f {
+			reg = <0x2009087f>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&hiubus {
+	clkc: clock-controller@0 {
+		compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc";
+		#clock-cells = <1>;
+		reg = <0x0 0x0 0x0 0x3db>;
+	};
+};
+
+&i2c_A {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&sd_emmc_a {
+	clocks = <&clkc CLKID_SD_EMMC_A>,
+		 <&xtal>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+};
+
+&sd_emmc_b {
+	clocks = <&clkc CLKID_SD_EMMC_B>,
+		 <&xtal>,
+		 <&clkc CLKID_FCLK_DIV2>;
+       clock-names = "core", "clkin0", "clkin1";
+};
+
+&sd_emmc_c {
+	clocks = <&clkc CLKID_SD_EMMC_C>,
+		 <&xtal>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+};
+
+&vpu {
+	compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
+};
diff --git a/src/arm64/amlogic/meson-gxm-nexbox-a1.dts b/src/arm64/amlogic/meson-gxm-nexbox-a1.dts
new file mode 100644
index 000000000000..5a337d339df1
--- /dev/null
+++ b/src/arm64/amlogic/meson-gxm-nexbox-a1.dts
@@ -0,0 +1,185 @@
+/*
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+
+/ {
+	compatible = "nexbox,a1", "amlogic,s912", "amlogic,meson-gxm";
+	model = "NEXBOX A1";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	vddio_boot: regulator-vddio-boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+};
+
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	/* Select external PHY by default */
+	phy-handle = <&external_phy>;
+
+	snps,reset-gpio = <&gpio GPIOZ_14 0>;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-active-low;
+
+	/* External PHY is in RGMII */
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		max-speed = <1000>;
+	};
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
diff --git a/src/arm64/amlogic/meson-gxm-s912-q200.dts b/src/arm64/amlogic/meson-gxm-s912-q200.dts
new file mode 100644
index 000000000000..5dbc66088355
--- /dev/null
+++ b/src/arm64/amlogic/meson-gxm-s912-q200.dts
@@ -0,0 +1,77 @@
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "amlogic,q200", "amlogic,s912", "amlogic,meson-gxm";
+	model = "Amlogic Meson GXM (S912) Q200 Development Board";
+};
+
+/* Q200 has exclusive choice between internal or external PHY */
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	/* Select external PHY by default */
+	phy-handle = <&external_phy>;
+
+	/* External PHY reset is shared with internal PHY Led signals */
+	snps,reset-gpio = <&gpio GPIOZ_14 0>;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-active-low;
+
+	/* External PHY is in RGMII */
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		max-speed = <1000>;
+	};
+};
diff --git a/src/arm64/amlogic/meson-gxm-s912-q201.dts b/src/arm64/amlogic/meson-gxm-s912-q201.dts
new file mode 100644
index 000000000000..95e11d7faab8
--- /dev/null
+++ b/src/arm64/amlogic/meson-gxm-s912-q201.dts
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "amlogic,q201", "amlogic,s912", "amlogic,meson-gxm";
+	model = "Amlogic Meson GXM (S912) Q201 Development Board";
+};
+
+/* Q201 has only internal PHY port */
+&ethmac {
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
diff --git a/src/arm64/amlogic/meson-gxm.dtsi b/src/arm64/amlogic/meson-gxm.dtsi
new file mode 100644
index 000000000000..eb2f0c3e5e53
--- /dev/null
+++ b/src/arm64/amlogic/meson-gxm.dtsi
@@ -0,0 +1,118 @@
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "meson-gxl.dtsi"
+
+/ {
+	compatible = "amlogic,meson-gxm";
+
+	cpus {
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+	};
+};
+
+&vpu {
+	compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
+};
diff --git a/src/arm64/apm/apm-merlin.dts b/src/arm64/apm/apm-merlin.dts
index 387c6a8d0da9..b0f64414c1b0 100644
--- a/src/arm64/apm/apm-merlin.dts
+++ b/src/arm64/apm/apm-merlin.dts
@@ -83,3 +83,9 @@
 		status = "ok";
 	};
 };
+
+&mdio {
+	sgenet0phy: phy@0 {
+		reg = <0x0>;
+	};
+};
diff --git a/src/arm64/apm/apm-mustang.dts b/src/arm64/apm/apm-mustang.dts
index 44db32ec5e9c..32a961c5e98a 100644
--- a/src/arm64/apm/apm-mustang.dts
+++ b/src/arm64/apm/apm-mustang.dts
@@ -74,8 +74,21 @@
 
 &xgenet {
 	status = "ok";
+	rxlos-gpios = <&sbgpio 12 1>;
 };
 
 &mmc0 {
 	status = "ok";
 };
+
+&mdio {
+	menet0phy: phy@3 {
+		reg = <0x3>;
+	};
+	sgenet0phy: phy@4 {
+		reg = <0x4>;
+	};
+	sgenet1phy: phy@5 {
+		reg = <0x5>;
+	};
+};
diff --git a/src/arm64/apm/apm-shadowcat.dtsi b/src/arm64/apm/apm-shadowcat.dtsi
index c569f761d090..72720e9132a1 100644
--- a/src/arm64/apm/apm-shadowcat.dtsi
+++ b/src/arm64/apm/apm-shadowcat.dtsi
@@ -26,6 +26,8 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_0>;
+			#clock-cells = <1>;
+			clocks = <&pmd0clk 0>;
 		};
 		cpu@001 {
 			device_type = "cpu";
@@ -34,6 +36,8 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_0>;
+			#clock-cells = <1>;
+			clocks = <&pmd0clk 0>;
 		};
 		cpu@100 {
 			device_type = "cpu";
@@ -42,6 +46,8 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_1>;
+			#clock-cells = <1>;
+			clocks = <&pmd1clk 0>;
 		};
 		cpu@101 {
 			device_type = "cpu";
@@ -50,6 +56,8 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_1>;
+			#clock-cells = <1>;
+			clocks = <&pmd1clk 0>;
 		};
 		cpu@200 {
 			device_type = "cpu";
@@ -58,6 +66,8 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_2>;
+			#clock-cells = <1>;
+			clocks = <&pmd2clk 0>;
 		};
 		cpu@201 {
 			device_type = "cpu";
@@ -66,6 +76,8 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_2>;
+			#clock-cells = <1>;
+			clocks = <&pmd2clk 0>;
 		};
 		cpu@300 {
 			device_type = "cpu";
@@ -74,6 +86,8 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_3>;
+			#clock-cells = <1>;
+			clocks = <&pmd3clk 0>;
 		};
 		cpu@301 {
 			device_type = "cpu";
@@ -82,6 +96,8 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_3>;
+			#clock-cells = <1>;
+			clocks = <&pmd3clk 0>;
 		};
 		xgene_L2_0: l2-cache-0 {
 			compatible = "cache";
@@ -106,88 +122,88 @@
 		interrupts = <1 9 0xf04>;	/* GIC Maintenence IRQ */
 		ranges = <0 0 0 0x79000000 0x0 0x800000>; /* MSI Range */
 		reg = <0x0 0x78090000 0x0 0x10000>,	/* GIC Dist */
-		      <0x0 0x780A0000 0x0 0x20000>,	/* GIC CPU */
-		      <0x0 0x780C0000 0x0 0x10000>,	/* GIC VCPU Control */
-		      <0x0 0x780E0000 0x0 0x20000>;	/* GIC VCPU */
-		v2m0: v2m@0x00000 {
+		      <0x0 0x780a0000 0x0 0x20000>,	/* GIC CPU */
+		      <0x0 0x780c0000 0x0 0x10000>,	/* GIC VCPU Control */
+		      <0x0 0x780e0000 0x0 0x20000>;	/* GIC VCPU */
+		v2m0: v2m@00000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0x0 0x0 0x0 0x1000>;
 		};
-		v2m1: v2m@0x10000 {
+		v2m1: v2m@10000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0x0 0x10000 0x0 0x1000>;
 		};
-		v2m2: v2m@0x20000 {
+		v2m2: v2m@20000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0x0 0x20000 0x0 0x1000>;
 		};
-		v2m3: v2m@0x30000 {
+		v2m3: v2m@30000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0x0 0x30000 0x0 0x1000>;
 		};
-		v2m4: v2m@0x40000 {
+		v2m4: v2m@40000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0x0 0x40000 0x0 0x1000>;
 		};
-		v2m5: v2m@0x50000 {
+		v2m5: v2m@50000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0x0 0x50000 0x0 0x1000>;
 		};
-		v2m6: v2m@0x60000 {
+		v2m6: v2m@60000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0x0 0x60000 0x0 0x1000>;
 		};
-		v2m7: v2m@0x70000 {
+		v2m7: v2m@70000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0x0 0x70000 0x0 0x1000>;
 		};
-		v2m8: v2m@0x80000 {
+		v2m8: v2m@80000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0x0 0x80000 0x0 0x1000>;
 		};
-		v2m9: v2m@0x90000 {
+		v2m9: v2m@90000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0x0 0x90000 0x0 0x1000>;
 		};
-		v2m10: v2m@0xA0000 {
+		v2m10: v2m@a0000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
-			reg = <0x0 0xA0000 0x0 0x1000>;
+			reg = <0x0 0xa0000 0x0 0x1000>;
 		};
-		v2m11: v2m@0xB0000 {
+		v2m11: v2m@b0000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
-			reg = <0x0 0xB0000 0x0 0x1000>;
+			reg = <0x0 0xb0000 0x0 0x1000>;
 		};
-		v2m12: v2m@0xC0000 {
+		v2m12: v2m@c0000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
-			reg = <0x0 0xC0000 0x0 0x1000>;
+			reg = <0x0 0xc0000 0x0 0x1000>;
 		};
-		v2m13: v2m@0xD0000 {
+		v2m13: v2m@d0000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
-			reg = <0x0 0xD0000 0x0 0x1000>;
+			reg = <0x0 0xd0000 0x0 0x1000>;
 		};
-		v2m14: v2m@0xE0000 {
+		v2m14: v2m@e0000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
-			reg = <0x0 0xE0000 0x0 0x1000>;
+			reg = <0x0 0xe0000 0x0 0x1000>;
 		};
-		v2m15: v2m@0xF0000 {
+		v2m15: v2m@f0000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
-			reg = <0x0 0xF0000 0x0 0x1000>;
+			reg = <0x0 0xf0000 0x0 0x1000>;
 		};
 	};
 
@@ -198,10 +214,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 0 0xff04>,	/* Secure Phys IRQ */
-			     <1 13 0xff04>,	/* Non-secure Phys IRQ */
-			     <1 14 0xff04>,	/* Virt IRQ */
-			     <1 15 0xff04>;	/* Hyp IRQ */
+		interrupts = <1 0 0xff08>,	/* Secure Phys IRQ */
+			     <1 13 0xff08>,	/* Non-secure Phys IRQ */
+			     <1 14 0xff08>,	/* Virt IRQ */
+			     <1 15 0xff08>;	/* Hyp IRQ */
 		clock-frequency = <50000000>;
 	};
 
@@ -223,6 +239,46 @@
 				clock-output-names = "refclk";
 			};
 
+			pmdpll: pmdpll@170000f0 {
+				compatible = "apm,xgene-pcppll-v2-clock";
+				#clock-cells = <1>;
+				clocks = <&refclk 0>;
+				reg = <0x0 0x170000f0 0x0 0x10>;
+				clock-output-names = "pmdpll";
+			};
+
+			pmd0clk: pmd0clk@7e200200 {
+				compatible = "apm,xgene-pmd-clock";
+				#clock-cells = <1>;
+				clocks = <&pmdpll 0>;
+				reg = <0x0 0x7e200200 0x0 0x10>;
+				clock-output-names = "pmd0clk";
+			};
+
+			pmd1clk: pmd1clk@7e200210 {
+				compatible = "apm,xgene-pmd-clock";
+				#clock-cells = <1>;
+				clocks = <&pmdpll 0>;
+				reg = <0x0 0x7e200210 0x0 0x10>;
+				clock-output-names = "pmd1clk";
+			};
+
+			pmd2clk: pmd2clk@7e200220 {
+				compatible = "apm,xgene-pmd-clock";
+				#clock-cells = <1>;
+				clocks = <&pmdpll 0>;
+				reg = <0x0 0x7e200220 0x0 0x10>;
+				clock-output-names = "pmd2clk";
+			};
+
+			pmd3clk: pmd3clk@7e200230 {
+				compatible = "apm,xgene-pmd-clock";
+				#clock-cells = <1>;
+				clocks = <&pmdpll 0>;
+				reg = <0x0 0x7e200230 0x0 0x10>;
+				clock-output-names = "pmd3clk";
+			};
+
 			socpll: socpll@17000120 {
 				compatible = "apm,xgene-socpll-v2-clock";
 				#clock-cells = <1>;
@@ -453,6 +509,64 @@
 			};
 		};
 
+		pmu: pmu@78810000 {
+			compatible = "apm,xgene-pmu-v2";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			regmap-csw = <&csw>;
+			regmap-mcba = <&mcba>;
+			regmap-mcbb = <&mcbb>;
+			reg = <0x0 0x78810000 0x0 0x1000>;
+			interrupts = <0x0 0x22 0x4>;
+
+			pmul3c@7e610000 {
+				compatible = "apm,xgene-pmu-l3c";
+				reg = <0x0 0x7e610000 0x0 0x1000>;
+			};
+
+			pmuiob@7e940000 {
+				compatible = "apm,xgene-pmu-iob";
+				reg = <0x0 0x7e940000 0x0 0x1000>;
+			};
+
+			pmucmcb@7e710000 {
+				compatible = "apm,xgene-pmu-mcb";
+				reg = <0x0 0x7e710000 0x0 0x1000>;
+				enable-bit-index = <0>;
+			};
+
+			pmucmcb@7e730000 {
+				compatible = "apm,xgene-pmu-mcb";
+				reg = <0x0 0x7e730000 0x0 0x1000>;
+				enable-bit-index = <1>;
+			};
+
+			pmucmc@7e810000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e810000 0x0 0x1000>;
+				enable-bit-index = <0>;
+			};
+
+			pmucmc@7e850000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e850000 0x0 0x1000>;
+				enable-bit-index = <1>;
+			};
+
+			pmucmc@7e890000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e890000 0x0 0x1000>;
+				enable-bit-index = <2>;
+			};
+
+			pmucmc@7e8d0000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e8d0000 0x0 0x1000>;
+				enable-bit-index = <3>;
+			};
+		};
+
 		mailbox: mailbox@10540000 {
 			compatible = "apm,xgene-slimpro-mbox";
 			reg = <0x0 0x10540000 0x0 0x8000>;
@@ -472,6 +586,11 @@
 			mboxes = <&mailbox 0>;
 		};
 
+		hwmonslimpro {
+			compatible = "apm,xgene-slimpro-hwmon";
+			mboxes = <&mailbox 7>;
+		};
+
 		serial0: serial@10600000 {
 			device_type = "serial";
 			compatible = "ns16550";
@@ -508,10 +627,10 @@
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x10 0x1
-					 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x11 0x1
-					 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x12 0x1
-					 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x13 0x1>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x10 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x11 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x12 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x13 0x4>;
 			dma-coherent;
 			clocks = <&pcie0clk 0>;
 			msi-parent = <&v2m0>;
@@ -533,10 +652,10 @@
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x16 0x1
-					 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x17 0x1
-					 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x18 0x1
-					 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x19 0x1>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x16 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x17 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x18 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x19 0x4>;
 			dma-coherent;
 			clocks = <&pcie1clk 0>;
 			msi-parent = <&v2m0>;
@@ -625,26 +744,35 @@
 			apm,irq-start = <8>;
 		};
 
+		mdio: mdio@1f610000 {
+			compatible = "apm,xgene-mdio-xfi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x1f610000 0x0 0xd100>;
+			clocks = <&xge0clk 0>;
+		};
+
 		sgenet0: ethernet@1f610000 {
 			compatible = "apm,xgene2-sgenet";
 			status = "disabled";
-			reg = <0x0 0x1f610000 0x0 0x10000>,
-			      <0x0 0x1f600000 0x0 0Xd100>,
-			      <0x0 0x20000000 0x0 0X20000>;
+			reg = <0x0 0x1f610000 0x0 0xd100>,
+			      <0x0 0x1f600000 0x0 0xd100>,
+			      <0x0 0x20000000 0x0 0x20000>;
 			interrupts = <0 96 4>,
 				     <0 97 4>;
 			dma-coherent;
 			clocks = <&xge0clk 0>;
 			local-mac-address = [00 01 73 00 00 01];
 			phy-connection-type = "sgmii";
+			phy-handle = <&sgenet0phy>;
 		};
 
 		xgenet1: ethernet@1f620000 {
 			compatible = "apm,xgene2-xgenet";
 			status = "disabled";
 			reg = <0x0 0x1f620000 0x0 0x10000>,
-			      <0x0 0x1f600000 0x0 0Xd100>,
-			      <0x0 0x20000000 0x0 0X220000>;
+			      <0x0 0x1f600000 0x0 0xd100>,
+			      <0x0 0x20000000 0x0 0x220000>;
 			interrupts = <0 108 4>,
 				     <0 109 4>,
 				     <0 110 4>,
@@ -684,7 +812,7 @@
 			#size-cells = <0>;
 			compatible = "snps,designware-i2c";
 			reg = <0x0 0x10640000 0x0 0x1000>;
-			interrupts = <0 0x3A 0x4>;
+			interrupts = <0 0x3a 0x4>;
 			clocks = <&i2c4clk 0>;
 			bus_num = <4>;
 		};
diff --git a/src/arm64/apm/apm-storm.dtsi b/src/arm64/apm/apm-storm.dtsi
index 5147d7698924..63be8e51eaa8 100644
--- a/src/arm64/apm/apm-storm.dtsi
+++ b/src/arm64/apm/apm-storm.dtsi
@@ -110,10 +110,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 0 0xff01>,	/* Secure Phys IRQ */
-			     <1 13 0xff01>,	/* Non-secure Phys IRQ */
-			     <1 14 0xff01>,	/* Virt IRQ */
-			     <1 15 0xff01>;	/* Hyp IRQ */
+		interrupts = <1 0 0xff08>,	/* Secure Phys IRQ */
+			     <1 13 0xff08>,	/* Non-secure Phys IRQ */
+			     <1 14 0xff08>,	/* Virt IRQ */
+			     <1 15 0xff08>;	/* Hyp IRQ */
 		clock-frequency = <50000000>;
 	};
 
@@ -199,16 +199,6 @@
 				clock-output-names = "sdioclk";
 			};
 
-			qmlclk: qmlclk {
-				compatible = "apm,xgene-device-clock";
-				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
-				clock-names = "qmlclk";
-				reg = <0x0 0x1703C000 0x0 0x1000>;
-				reg-names = "csr-reg";
-				clock-output-names = "qmlclk";
-			};
-
 			ethclk: ethclk {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
@@ -226,7 +216,7 @@
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
 				clocks = <&ethclk 0>;
-				reg = <0x0 0x1702C000 0x0 0x1000>;
+				reg = <0x0 0x1702c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "menetclk";
 			};
@@ -237,20 +227,11 @@
 				clocks = <&socplldiv2 0>;
 				reg = <0x0 0x1f21c000 0x0 0x1000>;
 				reg-names = "csr-reg";
-				csr-mask = <0x3>;
+				csr-mask = <0xa>;
+				enable-mask = <0xf>;
 				clock-output-names = "sge0clk";
 			};
 
-			sge1clk: sge1clk@1f21c000 {
-				compatible = "apm,xgene-device-clock";
-				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
-				reg = <0x0 0x1f21c000 0x0 0x1000>;
-				reg-names = "csr-reg";
-				csr-mask = <0xc>;
-				clock-output-names = "sge1clk";
-			};
-
 			xge0clk: xge0clk@1f61c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
@@ -572,6 +553,64 @@
 			};
 		};
 
+		pmu: pmu@78810000 {
+			compatible = "apm,xgene-pmu-v2";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			regmap-csw = <&csw>;
+			regmap-mcba = <&mcba>;
+			regmap-mcbb = <&mcbb>;
+			reg = <0x0 0x78810000 0x0 0x1000>;
+			interrupts = <0x0 0x22 0x4>;
+
+			pmul3c@7e610000 {
+				compatible = "apm,xgene-pmu-l3c";
+				reg = <0x0 0x7e610000 0x0 0x1000>;
+			};
+
+			pmuiob@7e940000 {
+				compatible = "apm,xgene-pmu-iob";
+				reg = <0x0 0x7e940000 0x0 0x1000>;
+			};
+
+			pmucmcb@7e710000 {
+				compatible = "apm,xgene-pmu-mcb";
+				reg = <0x0 0x7e710000 0x0 0x1000>;
+				enable-bit-index = <0>;
+			};
+
+			pmucmcb@7e730000 {
+				compatible = "apm,xgene-pmu-mcb";
+				reg = <0x0 0x7e730000 0x0 0x1000>;
+				enable-bit-index = <1>;
+			};
+
+			pmucmc@7e810000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e810000 0x0 0x1000>;
+				enable-bit-index = <0>;
+			};
+
+			pmucmc@7e850000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e850000 0x0 0x1000>;
+				enable-bit-index = <1>;
+			};
+
+			pmucmc@7e890000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e890000 0x0 0x1000>;
+				enable-bit-index = <2>;
+			};
+
+			pmucmc@7e8d0000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e8d0000 0x0 0x1000>;
+				enable-bit-index = <3>;
+			};
+		};
+
 		pcie0: pcie@1f2b0000 {
 			status = "disabled";
 			device_type = "pci";
@@ -588,10 +627,10 @@
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
-					 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
-					 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
-					 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x4>;
 			dma-coherent;
 			clocks = <&pcie0clk 0>;
 			msi-parent = <&msi>;
@@ -613,10 +652,10 @@
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x1
-					 0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x1
-					 0x0 0x0 0x0 0x3 &gic 0x0 0xca 0x1
-					 0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x1>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xca 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x4>;
 			dma-coherent;
 			clocks = <&pcie1clk 0>;
 			msi-parent = <&msi>;
@@ -638,10 +677,10 @@
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x1
-					 0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x1
-					 0x0 0x0 0x0 0x3 &gic 0x0 0xd0 0x1
-					 0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x1>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xd0 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x4>;
 			dma-coherent;
 			clocks = <&pcie2clk 0>;
 			msi-parent = <&msi>;
@@ -663,10 +702,10 @@
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x1
-					 0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x1
-					 0x0 0x0 0x0 0x3 &gic 0x0 0xd6 0x1
-					 0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x1>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xd6 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x4>;
 			dma-coherent;
 			clocks = <&pcie3clk 0>;
 			msi-parent = <&msi>;
@@ -688,10 +727,10 @@
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x1
-					 0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x1
-					 0x0 0x0 0x0 0x3 &gic 0x0 0xdc 0x1
-					 0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x1>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xdc 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x4>;
 			dma-coherent;
 			clocks = <&pcie4clk 0>;
 			msi-parent = <&msi>;
@@ -716,6 +755,11 @@
 			mboxes = <&mailbox 0>;
 		};
 
+		hwmonslimpro {
+			compatible = "apm,xgene-slimpro-hwmon";
+			mboxes = <&mailbox 7>;
+		};
+
 		serial0: serial@1c020000 {
 			status = "disabled";
 			device_type = "serial";
@@ -921,12 +965,20 @@
 			clocks = <&rtcclk 0>;
 		};
 
+		mdio: mdio@17020000 {
+			compatible = "apm,xgene-mdio-rgmii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x17020000 0x0 0xd100>;
+			clocks = <&menetclk 0>;
+		};
+
 		menet: ethernet@17020000 {
 			compatible = "apm,xgene-enet";
 			status = "disabled";
 			reg = <0x0 0x17020000 0x0 0xd100>,
-			      <0x0 0X17030000 0x0 0Xc300>,
-			      <0x0 0X10000000 0x0 0X200>;
+			      <0x0 0x17030000 0x0 0xc300>,
+			      <0x0 0x10000000 0x0 0x200>;
 			reg-names = "enet_csr", "ring_csr", "ring_cmd";
 			interrupts = <0x0 0x3c 0x4>;
 			dma-coherent;
@@ -934,7 +986,7 @@
 			/* mac address will be overwritten by the bootloader */
 			local-mac-address = [00 00 00 00 00 00];
 			phy-connection-type = "rgmii";
-			phy-handle = <&menetphy>;
+			phy-handle = <&menetphy>,<&menet0phy>;
 			mdio {
 				compatible = "apm,xgene-mdio";
 				#address-cells = <1>;
@@ -951,39 +1003,40 @@
 			compatible = "apm,xgene1-sgenet";
 			status = "disabled";
 			reg = <0x0 0x1f210000 0x0 0xd100>,
-			      <0x0 0x1f200000 0x0 0Xc300>,
-			      <0x0 0x1B000000 0x0 0X200>;
+			      <0x0 0x1f200000 0x0 0xc300>,
+			      <0x0 0x1b000000 0x0 0x200>;
 			reg-names = "enet_csr", "ring_csr", "ring_cmd";
-			interrupts = <0x0 0xA0 0x4>,
-				     <0x0 0xA1 0x4>;
+			interrupts = <0x0 0xa0 0x4>,
+				     <0x0 0xa1 0x4>;
 			dma-coherent;
 			clocks = <&sge0clk 0>;
 			local-mac-address = [00 00 00 00 00 00];
 			phy-connection-type = "sgmii";
+			phy-handle = <&sgenet0phy>;
 		};
 
 		sgenet1: ethernet@1f210030 {
 			compatible = "apm,xgene1-sgenet";
 			status = "disabled";
 			reg = <0x0 0x1f210030 0x0 0xd100>,
-			      <0x0 0x1f200000 0x0 0Xc300>,
-			      <0x0 0x1B000000 0x0 0X8000>;
+			      <0x0 0x1f200000 0x0 0xc300>,
+			      <0x0 0x1b000000 0x0 0x8000>;
 			reg-names = "enet_csr", "ring_csr", "ring_cmd";
-			interrupts = <0x0 0xAC 0x4>,
-				     <0x0 0xAD 0x4>;
+			interrupts = <0x0 0xac 0x4>,
+				     <0x0 0xad 0x4>;
 			port-id = <1>;
 			dma-coherent;
-			clocks = <&sge1clk 0>;
 			local-mac-address = [00 00 00 00 00 00];
 			phy-connection-type = "sgmii";
+			phy-handle = <&sgenet1phy>;
 		};
 
 		xgenet: ethernet@1f610000 {
 			compatible = "apm,xgene1-xgenet";
 			status = "disabled";
 			reg = <0x0 0x1f610000 0x0 0xd100>,
-			      <0x0 0x1f600000 0x0 0Xc300>,
-			      <0x0 0x18000000 0x0 0X200>;
+			      <0x0 0x1f600000 0x0 0xc300>,
+			      <0x0 0x18000000 0x0 0x200>;
 			reg-names = "enet_csr", "ring_csr", "ring_cmd";
 			interrupts = <0x0 0x60 0x4>,
 				     <0x0 0x61 0x4>,
@@ -1005,11 +1058,11 @@
 			compatible = "apm,xgene1-xgenet";
 			status = "disabled";
 			reg = <0x0 0x1f620000 0x0 0xd100>,
-			      <0x0 0x1f600000 0x0 0Xc300>,
-			      <0x0 0x18000000 0x0 0X8000>;
+			      <0x0 0x1f600000 0x0 0xc300>,
+			      <0x0 0x18000000 0x0 0x8000>;
 			reg-names = "enet_csr", "ring_csr", "ring_cmd";
-			interrupts = <0x0 0x6C 0x4>,
-				     <0x0 0x6D 0x4>;
+			interrupts = <0x0 0x6c 0x4>,
+				     <0x0 0x6d 0x4>;
 			port-id = <1>;
 			dma-coherent;
 			clocks = <&xge1clk 0>;
diff --git a/src/arm64/arm/juno-base.dtsi b/src/arm64/arm/juno-base.dtsi
index dee2386d3b9b..7d832247d0db 100644
--- a/src/arm64/arm/juno-base.dtsi
+++ b/src/arm64/arm/juno-base.dtsi
@@ -29,6 +29,28 @@
 		clock-names = "apb_pclk";
 	};
 
+	smmu_pcie: iommu@2b500000 {
+		compatible = "arm,mmu-401", "arm,smmu-v1";
+		reg = <0x0 0x2b500000 0x0 0x10000>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+		dma-coherent;
+		status = "disabled";
+	};
+
+	smmu_etr: iommu@2b600000 {
+		compatible = "arm,mmu-401", "arm,smmu-v1";
+		reg = <0x0 0x2b600000 0x0 0x10000>;
+		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+		dma-coherent;
+		status = "disabled";
+	};
+
 	gic: interrupt-controller@2c010000 {
 		compatible = "arm,gic-400", "arm,cortex-a15-gic";
 		reg = <0x0 0x2c010000 0 0x1000>,
@@ -56,6 +78,316 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
+	/*
+	 * Juno TRMs specify the size for these coresight components as 64K.
+	 * The actual size is just 4K though 64K is reserved. Access to the
+	 * unmapped reserved region results in a DECERR response.
+	 */
+	etf@20010000 {
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0 0x20010000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* input port */
+			port@0 {
+				reg = <0>;
+				etf_in_port: endpoint {
+					slave-mode;
+					remote-endpoint = <&main_funnel_out_port>;
+				};
+			};
+
+			/* output port */
+			port@1 {
+				reg = <0>;
+				etf_out_port: endpoint {
+					remote-endpoint = <&replicator_in_port0>;
+				};
+			};
+		};
+	};
+
+	tpiu@20030000 {
+		compatible = "arm,coresight-tpiu", "arm,primecell";
+		reg = <0 0x20030000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		port {
+			tpiu_in_port: endpoint {
+				slave-mode;
+				remote-endpoint = <&replicator_out_port0>;
+			};
+		};
+	};
+
+	main-funnel@20040000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0 0x20040000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				main_funnel_out_port: endpoint {
+					remote-endpoint = <&etf_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <0>;
+				main_funnel_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&cluster0_funnel_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <1>;
+				main_funnel_in_port1: endpoint {
+					slave-mode;
+					remote-endpoint = <&cluster1_funnel_out_port>;
+				};
+			};
+
+		};
+	};
+
+	etr@20070000 {
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0 0x20070000 0 0x1000>;
+		iommus = <&smmu_etr 0>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		port {
+			etr_in_port: endpoint {
+				slave-mode;
+				remote-endpoint = <&replicator_out_port1>;
+			};
+		};
+	};
+
+	etm0: etm@22040000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x22040000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		port {
+			cluster0_etm0_out_port: endpoint {
+				remote-endpoint = <&cluster0_funnel_in_port0>;
+			};
+		};
+	};
+
+	cluster0-funnel@220c0000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0 0x220c0000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				cluster0_funnel_out_port: endpoint {
+					remote-endpoint = <&main_funnel_in_port0>;
+				};
+			};
+
+			port@1 {
+				reg = <0>;
+				cluster0_funnel_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&cluster0_etm0_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <1>;
+				cluster0_funnel_in_port1: endpoint {
+					slave-mode;
+					remote-endpoint = <&cluster0_etm1_out_port>;
+				};
+			};
+		};
+	};
+
+	etm1: etm@22140000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x22140000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		port {
+			cluster0_etm1_out_port: endpoint {
+				remote-endpoint = <&cluster0_funnel_in_port1>;
+			};
+		};
+	};
+
+	etm2: etm@23040000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x23040000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		port {
+			cluster1_etm0_out_port: endpoint {
+				remote-endpoint = <&cluster1_funnel_in_port0>;
+			};
+		};
+	};
+
+	cluster1-funnel@230c0000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0 0x230c0000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				cluster1_funnel_out_port: endpoint {
+					remote-endpoint = <&main_funnel_in_port1>;
+				};
+			};
+
+			port@1 {
+				reg = <0>;
+				cluster1_funnel_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&cluster1_etm0_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <1>;
+				cluster1_funnel_in_port1: endpoint {
+					slave-mode;
+					remote-endpoint = <&cluster1_etm1_out_port>;
+				};
+			};
+			port@3 {
+				reg = <2>;
+				cluster1_funnel_in_port2: endpoint {
+					slave-mode;
+					remote-endpoint = <&cluster1_etm2_out_port>;
+				};
+			};
+			port@4 {
+				reg = <3>;
+				cluster1_funnel_in_port3: endpoint {
+					slave-mode;
+					remote-endpoint = <&cluster1_etm3_out_port>;
+				};
+			};
+		};
+	};
+
+	etm3: etm@23140000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x23140000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		port {
+			cluster1_etm1_out_port: endpoint {
+				remote-endpoint = <&cluster1_funnel_in_port1>;
+			};
+		};
+	};
+
+	etm4: etm@23240000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x23240000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		port {
+			cluster1_etm2_out_port: endpoint {
+				remote-endpoint = <&cluster1_funnel_in_port2>;
+			};
+		};
+	};
+
+	etm5: etm@23340000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x23340000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		port {
+			cluster1_etm3_out_port: endpoint {
+				remote-endpoint = <&cluster1_funnel_in_port3>;
+			};
+		};
+	};
+
+	coresight-replicator {
+		/*
+		 * Non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-replicator";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&etr_in_port>;
+				};
+			};
+
+			/* replicator input port */
+			port@2 {
+				reg = <0>;
+				replicator_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&etf_out_port>;
+				};
+			};
+		};
+	};
+
 	sram: sram@2e000000 {
 		compatible = "arm,juno-sram-ns", "mmio-sram";
 		reg = <0x0 0x2e000000 0x0 0x8000>;
@@ -84,7 +416,7 @@
 		#address-cells = <3>;
 		#size-cells = <2>;
 		dma-coherent;
-		ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>,
+		ranges = <0x01000000 0x00 0x00000000 0x00 0x5f800000 0x0 0x00800000>,
 			 <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>,
 			 <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
 		#interrupt-cells = <1>;
@@ -95,6 +427,8 @@
 				<0 0 0 4 &gic 0 0 0 139 4>;
 		msi-parent = <&v2m_0>;
 		status = "disabled";
+		iommu-map-mask = <0x0>;	/* RC has no means to output PCI RID */
+		iommu-map = <0x0 &smmu_pcie 0x0 0x1>;
 	};
 
 	scpi {
@@ -119,14 +453,104 @@
 			};
 		};
 
+		scpi_devpd: scpi-power-domains {
+			compatible = "arm,scpi-power-domains";
+			num-domains = <2>;
+			#power-domain-cells = <1>;
+		};
+
 		scpi_sensors0: sensors {
 			compatible = "arm,scpi-sensors";
 			#thermal-sensor-cells = <1>;
 		};
 	};
 
+	thermal-zones {
+		pmic {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 0>;
+		};
+
+		soc {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 3>;
+		};
+
+		big_cluster_thermal_zone: big_cluster {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 21>;
+			status = "disabled";
+		};
+
+		little_cluster_thermal_zone: little_cluster {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 22>;
+			status = "disabled";
+		};
+
+		gpu0_thermal_zone: gpu0 {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 23>;
+			status = "disabled";
+		};
+
+		gpu1_thermal_zone: gpu1 {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 24>;
+			status = "disabled";
+		};
+	};
+
 	/include/ "juno-clocks.dtsi"
 
+	smmu_dma: iommu@7fb00000 {
+		compatible = "arm,mmu-401", "arm,smmu-v1";
+		reg = <0x0 0x7fb00000 0x0 0x10000>;
+		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+		dma-coherent;
+		status = "disabled";
+	};
+
+	smmu_hdlcd1: iommu@7fb10000 {
+		compatible = "arm,mmu-401", "arm,smmu-v1";
+		reg = <0x0 0x7fb10000 0x0 0x10000>;
+		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+		status = "disabled";
+	};
+
+	smmu_hdlcd0: iommu@7fb20000 {
+		compatible = "arm,mmu-401", "arm,smmu-v1";
+		reg = <0x0 0x7fb20000 0x0 0x10000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+		status = "disabled";
+	};
+
+	smmu_usb: iommu@7fb30000 {
+		compatible = "arm,mmu-401", "arm,smmu-v1";
+		reg = <0x0 0x7fb30000 0x0 0x10000>;
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+		dma-coherent;
+		status = "disabled";
+	};
+
 	dma@7ff00000 {
 		compatible = "arm,pl330", "arm,primecell";
 		reg = <0x0 0x7ff00000 0 0x1000>;
@@ -142,6 +566,15 @@
 			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		iommus = <&smmu_dma 0>,
+			 <&smmu_dma 1>,
+			 <&smmu_dma 2>,
+			 <&smmu_dma 3>,
+			 <&smmu_dma 4>,
+			 <&smmu_dma 5>,
+			 <&smmu_dma 6>,
+			 <&smmu_dma 7>,
+			 <&smmu_dma 8>;
 		clocks = <&soc_faxiclk>;
 		clock-names = "apb_pclk";
 	};
@@ -150,6 +583,7 @@
 		compatible = "arm,hdlcd";
 		reg = <0 0x7ff50000 0 0x1000>;
 		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		iommus = <&smmu_hdlcd1 0>;
 		clocks = <&scpi_clk 3>;
 		clock-names = "pxlclk";
 
@@ -164,6 +598,7 @@
 		compatible = "arm,hdlcd";
 		reg = <0 0x7ff60000 0 0x1000>;
 		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		iommus = <&smmu_hdlcd0 0>;
 		clocks = <&scpi_clk 3>;
 		clock-names = "pxlclk";
 
@@ -217,6 +652,7 @@
 		compatible = "generic-ohci";
 		reg = <0x0 0x7ffb0000 0x0 0x10000>;
 		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		iommus = <&smmu_usb 0>;
 		clocks = <&soc_usb48mhz>;
 	};
 
@@ -224,6 +660,7 @@
 		compatible = "generic-ehci";
 		reg = <0x0 0x7ffc0000 0x0 0x10000>;
 		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		iommus = <&smmu_usb 0>;
 		clocks = <&soc_usb48mhz>;
 	};
 
diff --git a/src/arm64/arm/juno-r1.dts b/src/arm64/arm/juno-r1.dts
index d95d9e7e2dc0..eec37feee8fc 100644
--- a/src/arm64/arm/juno-r1.dts
+++ b/src/arm64/arm/juno-r1.dts
@@ -76,7 +76,7 @@
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x1010000>;
 				local-timer-stop;
-				entry-latency-us = <300>;
+				entry-latency-us = <400>;
 				exit-latency-us = <1200>;
 				min-residency-us = <2500>;
 			};
@@ -90,6 +90,7 @@
 			next-level-cache = <&A57_L2>;
 			clocks = <&scpi_dvfs 0>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
 		};
 
 		A57_1: cpu@1 {
@@ -100,6 +101,7 @@
 			next-level-cache = <&A57_L2>;
 			clocks = <&scpi_dvfs 0>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
 		};
 
 		A53_0: cpu@100 {
@@ -110,6 +112,7 @@
 			next-level-cache = <&A53_L2>;
 			clocks = <&scpi_dvfs 1>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <578>;
 		};
 
 		A53_1: cpu@101 {
@@ -120,6 +123,7 @@
 			next-level-cache = <&A53_L2>;
 			clocks = <&scpi_dvfs 1>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <578>;
 		};
 
 		A53_2: cpu@102 {
@@ -130,6 +134,7 @@
 			next-level-cache = <&A53_L2>;
 			clocks = <&scpi_dvfs 1>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <578>;
 		};
 
 		A53_3: cpu@103 {
@@ -140,6 +145,7 @@
 			next-level-cache = <&A53_L2>;
 			clocks = <&scpi_dvfs 1>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <578>;
 		};
 
 		A57_L2: l2-cache0 {
@@ -181,3 +187,43 @@
 &pcie_ctlr {
 	status = "okay";
 };
+
+&etm0 {
+	cpu = <&A57_0>;
+};
+
+&etm1 {
+	cpu = <&A57_1>;
+};
+
+&etm2 {
+	cpu = <&A53_0>;
+};
+
+&etm3 {
+	cpu = <&A53_1>;
+};
+
+&etm4 {
+	cpu = <&A53_2>;
+};
+
+&etm5 {
+	cpu = <&A53_3>;
+};
+
+&big_cluster_thermal_zone {
+	status = "okay";
+};
+
+&little_cluster_thermal_zone {
+	status = "okay";
+};
+
+&gpu0_thermal_zone {
+	status = "okay";
+};
+
+&gpu1_thermal_zone {
+	status = "okay";
+};
diff --git a/src/arm64/arm/juno-r2.dts b/src/arm64/arm/juno-r2.dts
index 88ecd6182b67..28f40ec44090 100644
--- a/src/arm64/arm/juno-r2.dts
+++ b/src/arm64/arm/juno-r2.dts
@@ -76,7 +76,7 @@
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x1010000>;
 				local-timer-stop;
-				entry-latency-us = <300>;
+				entry-latency-us = <400>;
 				exit-latency-us = <1200>;
 				min-residency-us = <2500>;
 			};
@@ -90,6 +90,7 @@
 			next-level-cache = <&A72_L2>;
 			clocks = <&scpi_dvfs 0>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
 		};
 
 		A72_1: cpu@1 {
@@ -100,6 +101,7 @@
 			next-level-cache = <&A72_L2>;
 			clocks = <&scpi_dvfs 0>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
 		};
 
 		A53_0: cpu@100 {
@@ -110,6 +112,7 @@
 			next-level-cache = <&A53_L2>;
 			clocks = <&scpi_dvfs 1>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <485>;
 		};
 
 		A53_1: cpu@101 {
@@ -120,6 +123,7 @@
 			next-level-cache = <&A53_L2>;
 			clocks = <&scpi_dvfs 1>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <485>;
 		};
 
 		A53_2: cpu@102 {
@@ -130,6 +134,7 @@
 			next-level-cache = <&A53_L2>;
 			clocks = <&scpi_dvfs 1>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <485>;
 		};
 
 		A53_3: cpu@103 {
@@ -140,6 +145,7 @@
 			next-level-cache = <&A53_L2>;
 			clocks = <&scpi_dvfs 1>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <485>;
 		};
 
 		A72_L2: l2-cache0 {
@@ -181,3 +187,43 @@
 &pcie_ctlr {
 	status = "okay";
 };
+
+&etm0 {
+	cpu = <&A72_0>;
+};
+
+&etm1 {
+	cpu = <&A72_1>;
+};
+
+&etm2 {
+	cpu = <&A53_0>;
+};
+
+&etm3 {
+	cpu = <&A53_1>;
+};
+
+&etm4 {
+	cpu = <&A53_2>;
+};
+
+&etm5 {
+	cpu = <&A53_3>;
+};
+
+&big_cluster_thermal_zone {
+	status = "okay";
+};
+
+&little_cluster_thermal_zone {
+	status = "okay";
+};
+
+&gpu0_thermal_zone {
+	status = "okay";
+};
+
+&gpu1_thermal_zone {
+	status = "okay";
+};
diff --git a/src/arm64/arm/juno.dts b/src/arm64/arm/juno.dts
index dcfcf15a17f5..ac5ceb73f45f 100644
--- a/src/arm64/arm/juno.dts
+++ b/src/arm64/arm/juno.dts
@@ -76,7 +76,7 @@
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x1010000>;
 				local-timer-stop;
-				entry-latency-us = <300>;
+				entry-latency-us = <400>;
 				exit-latency-us = <1200>;
 				min-residency-us = <2500>;
 			};
@@ -90,6 +90,7 @@
 			next-level-cache = <&A57_L2>;
 			clocks = <&scpi_dvfs 0>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
 		};
 
 		A57_1: cpu@1 {
@@ -100,6 +101,7 @@
 			next-level-cache = <&A57_L2>;
 			clocks = <&scpi_dvfs 0>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
 		};
 
 		A53_0: cpu@100 {
@@ -110,6 +112,7 @@
 			next-level-cache = <&A53_L2>;
 			clocks = <&scpi_dvfs 1>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <578>;
 		};
 
 		A53_1: cpu@101 {
@@ -120,6 +123,7 @@
 			next-level-cache = <&A53_L2>;
 			clocks = <&scpi_dvfs 1>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <578>;
 		};
 
 		A53_2: cpu@102 {
@@ -130,6 +134,7 @@
 			next-level-cache = <&A53_L2>;
 			clocks = <&scpi_dvfs 1>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <578>;
 		};
 
 		A53_3: cpu@103 {
@@ -140,6 +145,7 @@
 			next-level-cache = <&A53_L2>;
 			clocks = <&scpi_dvfs 1>;
 			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <578>;
 		};
 
 		A57_L2: l2-cache0 {
@@ -173,3 +179,27 @@
 
 	#include "juno-base.dtsi"
 };
+
+&etm0 {
+	cpu = <&A57_0>;
+};
+
+&etm1 {
+	cpu = <&A57_1>;
+};
+
+&etm2 {
+	cpu = <&A53_0>;
+};
+
+&etm3 {
+	cpu = <&A53_1>;
+};
+
+&etm4 {
+	cpu = <&A53_2>;
+};
+
+&etm5 {
+	cpu = <&A53_3>;
+};
diff --git a/src/arm64/arm/rtsm_ve-aemv8a.dts b/src/arm64/arm/rtsm_ve-aemv8a.dts
index a852e28a40e1..a83ed2c6bbf7 100644
--- a/src/arm64/arm/rtsm_ve-aemv8a.dts
+++ b/src/arm64/arm/rtsm_ve-aemv8a.dts
@@ -81,7 +81,7 @@
 		#address-cells = <0>;
 		interrupt-controller;
 		reg = <0x0 0x2c001000 0 0x1000>,
-		      <0x0 0x2c002000 0 0x1000>,
+		      <0x0 0x2c002000 0 0x2000>,
 		      <0x0 0x2c004000 0 0x2000>,
 		      <0x0 0x2c006000 0 0x2000>;
 		interrupts = <1 9 0xf04>;
diff --git a/src/arm64/broadcom/bcm2835-rpi.dtsi b/src/arm64/broadcom/bcm2835-rpi.dtsi
new file mode 100644
index 000000000000..6ddf7dfe3f72
--- /dev/null
+++ b/src/arm64/broadcom/bcm2835-rpi.dtsi
@@ -0,0 +1,89 @@
+#include <dt-bindings/power/raspberrypi-power.h>
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		act {
+			label = "ACT";
+			default-state = "keep";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	soc {
+		firmware: firmware {
+			compatible = "raspberrypi,bcm2835-firmware";
+			mboxes = <&mailbox>;
+		};
+
+		power: power {
+			compatible = "raspberrypi,bcm2835-power";
+			firmware = <&firmware>;
+			#power-domain-cells = <1>;
+		};
+	};
+};
+
+&gpio {
+	pinctrl-names = "default";
+
+	gpioout: gpioout {
+		brcm,pins = <6>;
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+	};
+
+	alt0: alt0 {
+		brcm,pins = <4 5 7 8 9 10 11 14 15>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_gpio0>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_gpio2>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&sdhci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio48>;
+	status = "okay";
+	bus-width = <4>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&usb {
+	power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
+
+&v3d {
+	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
+};
+
+&hdmi {
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
diff --git a/src/arm64/broadcom/bcm2837-rpi-3-b.dts b/src/arm64/broadcom/bcm2837-rpi-3-b.dts
new file mode 100644
index 000000000000..c309633a1e87
--- /dev/null
+++ b/src/arm64/broadcom/bcm2837-rpi-3-b.dts
@@ -0,0 +1,24 @@
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
+	model = "Raspberry Pi 3 Model B";
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	leds {
+		act {
+			gpios = <&gpio 47 0>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/src/arm64/broadcom/bcm2837.dtsi b/src/arm64/broadcom/bcm2837.dtsi
new file mode 100644
index 000000000000..19f2fe620a21
--- /dev/null
+++ b/src/arm64/broadcom/bcm2837.dtsi
@@ -0,0 +1,82 @@
+#include "bcm283x.dtsi"
+
+/ {
+	compatible = "brcm,bcm2837";
+
+	soc {
+		ranges = <0x7e000000 0x3f000000 0x1000000>,
+			 <0x40000000 0x40000000 0x00001000>;
+		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
+
+		local_intc: local_intc {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&local_intc>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&local_intc>;
+		interrupts = <0>, // PHYS_SECURE_PPI
+			     <1>, // PHYS_NONSECURE_PPI
+			     <3>, // VIRT_PPI
+			     <2>; // HYP_PPI
+		always-on;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000d8>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e0>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e8>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000f0>;
+		};
+	};
+};
+
+/* Make the BCM2835-style global interrupt controller be a child of the
+ * CPU-local interrupt controller.
+ */
+&intc {
+	compatible = "brcm,bcm2836-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-parent = <&local_intc>;
+	interrupts = <8>;
+};
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2837-thermal";
+	status = "okay";
+};
diff --git a/src/arm64/broadcom/bcm283x-rpi-smsc9514.dtsi b/src/arm64/broadcom/bcm283x-rpi-smsc9514.dtsi
new file mode 100644
index 000000000000..3f0a56ebcf1f
--- /dev/null
+++ b/src/arm64/broadcom/bcm283x-rpi-smsc9514.dtsi
@@ -0,0 +1,19 @@
+/ {
+	aliases {
+		ethernet = &ethernet;
+	};
+};
+
+&usb {
+	usb1@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: usbether@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+};
diff --git a/src/arm64/broadcom/bcm283x-rpi-usb-host.dtsi b/src/arm64/broadcom/bcm283x-rpi-usb-host.dtsi
new file mode 100644
index 000000000000..73f4ece8dcd0
--- /dev/null
+++ b/src/arm64/broadcom/bcm283x-rpi-usb-host.dtsi
@@ -0,0 +1,3 @@
+&usb {
+	dr_mode = "host";
+};
diff --git a/src/arm64/broadcom/bcm283x.dtsi b/src/arm64/broadcom/bcm283x.dtsi
new file mode 100644
index 000000000000..9a44da190897
--- /dev/null
+++ b/src/arm64/broadcom/bcm283x.dtsi
@@ -0,0 +1,540 @@
+#include <dt-bindings/pinctrl/bcm2835.h>
+#include <dt-bindings/clock/bcm2835.h>
+#include <dt-bindings/clock/bcm2835-aux.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/* This include file covers the common peripherals and configuration between
+ * bcm2835 and bcm2836 implementations, leaving the CPU configuration to
+ * bcm2835.dtsi and bcm2836.dtsi.
+ */
+
+/ {
+	compatible = "brcm,bcm2835";
+	model = "BCM2835";
+	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		bootargs = "earlyprintk console=ttyAMA0";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		timer@7e003000 {
+			compatible = "brcm,bcm2835-system-timer";
+			reg = <0x7e003000 0x1000>;
+			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+			/* This could be a reference to BCM2835_CLOCK_TIMER,
+			 * but we don't have the driver using the common clock
+			 * support yet.
+			 */
+			clock-frequency = <1000000>;
+		};
+
+		dma: dma@7e007000 {
+			compatible = "brcm,bcm2835-dma";
+			reg = <0x7e007000 0xf00>;
+			interrupts = <1 16>,
+				     <1 17>,
+				     <1 18>,
+				     <1 19>,
+				     <1 20>,
+				     <1 21>,
+				     <1 22>,
+				     <1 23>,
+				     <1 24>,
+				     <1 25>,
+				     <1 26>,
+				     /* dma channel 11-14 share one irq */
+				     <1 27>,
+				     <1 27>,
+				     <1 27>,
+				     <1 27>,
+				     /* unused shared irq for all channels */
+				     <1 28>;
+			interrupt-names = "dma0",
+					  "dma1",
+					  "dma2",
+					  "dma3",
+					  "dma4",
+					  "dma5",
+					  "dma6",
+					  "dma7",
+					  "dma8",
+					  "dma9",
+					  "dma10",
+					  "dma11",
+					  "dma12",
+					  "dma13",
+					  "dma14",
+					  "dma-shared-all";
+			#dma-cells = <1>;
+			brcm,dma-channel-mask = <0x7f35>;
+		};
+
+		intc: interrupt-controller@7e00b200 {
+			compatible = "brcm,bcm2835-armctrl-ic";
+			reg = <0x7e00b200 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		watchdog@7e100000 {
+			compatible = "brcm,bcm2835-pm-wdt";
+			reg = <0x7e100000 0x28>;
+		};
+
+		clocks: cprman@7e101000 {
+			compatible = "brcm,bcm2835-cprman";
+			#clock-cells = <1>;
+			reg = <0x7e101000 0x2000>;
+
+			/* CPRMAN derives everything from the platform's
+			 * oscillator.
+			 */
+			clocks = <&clk_osc>;
+		};
+
+		rng@7e104000 {
+			compatible = "brcm,bcm2835-rng";
+			reg = <0x7e104000 0x10>;
+		};
+
+		mailbox: mailbox@7e00b880 {
+			compatible = "brcm,bcm2835-mbox";
+			reg = <0x7e00b880 0x40>;
+			interrupts = <0 1>;
+			#mbox-cells = <0>;
+		};
+
+		gpio: gpio@7e200000 {
+			compatible = "brcm,bcm2835-gpio";
+			reg = <0x7e200000 0xb4>;
+			/*
+			 * The GPIO IP block is designed for 3 banks of GPIOs.
+			 * Each bank has a GPIO interrupt for itself.
+			 * There is an overall "any bank" interrupt.
+			 * In order, these are GIC interrupts 17, 18, 19, 20.
+			 * Since the BCM2835 only has 2 banks, the 2nd bank
+			 * interrupt output appears to be mirrored onto the
+			 * 3rd bank's interrupt signal.
+			 * So, a bank0 interrupt shows up on 17, 20, and
+			 * a bank1 interrupt shows up on 18, 19, 20!
+			 */
+			interrupts = <2 17>, <2 18>, <2 19>, <2 20>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			/* Defines pin muxing groups according to
+			 * BCM2835-ARM-Peripherals.pdf page 102.
+			 *
+			 * While each pin can have its mux selected
+			 * for various functions individually, some
+			 * groups only make sense to switch to a
+			 * particular function together.
+			 */
+			dpi_gpio0: dpi_gpio0 {
+				brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
+					     12 13 14 15 16 17 18 19
+					     20 21 22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+			emmc_gpio22: emmc_gpio22 {
+				brcm,pins = <22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+			emmc_gpio34: emmc_gpio34 {
+				brcm,pins = <34 35 36 37 38 39>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+				brcm,pull = <BCM2835_PUD_OFF
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP>;
+			};
+			emmc_gpio48: emmc_gpio48 {
+				brcm,pins = <48 49 50 51 52 53>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+
+			gpclk0_gpio4: gpclk0_gpio4 {
+				brcm,pins = <4>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio5: gpclk1_gpio5 {
+				brcm,pins = <5>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio42: gpclk1_gpio42 {
+				brcm,pins = <42>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio44: gpclk1_gpio44 {
+				brcm,pins = <44>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk2_gpio6: gpclk2_gpio6 {
+				brcm,pins = <6>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk2_gpio43: gpclk2_gpio43 {
+				brcm,pins = <43>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+
+			i2c0_gpio0: i2c0_gpio0 {
+				brcm,pins = <0 1>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c0_gpio32: i2c0_gpio32 {
+				brcm,pins = <32 34>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c0_gpio44: i2c0_gpio44 {
+				brcm,pins = <44 45>;
+				brcm,function = <BCM2835_FSEL_ALT1>;
+			};
+			i2c1_gpio2: i2c1_gpio2 {
+				brcm,pins = <2 3>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c1_gpio44: i2c1_gpio44 {
+				brcm,pins = <44 45>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+			i2c_slave_gpio18: i2c_slave_gpio18 {
+				brcm,pins = <18 19 20 21>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+
+			jtag_gpio4: jtag_gpio4 {
+				brcm,pins = <4 5 6 12 13>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+			jtag_gpio22: jtag_gpio22 {
+				brcm,pins = <22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+
+			pcm_gpio18: pcm_gpio18 {
+				brcm,pins = <18 19 20 21>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pcm_gpio28: pcm_gpio28 {
+				brcm,pins = <28 29 30 31>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+
+			pwm0_gpio12: pwm0_gpio12 {
+				brcm,pins = <12>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pwm0_gpio18: pwm0_gpio18 {
+				brcm,pins = <18>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			pwm0_gpio40: pwm0_gpio40 {
+				brcm,pins = <40>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pwm1_gpio13: pwm1_gpio13 {
+				brcm,pins = <13>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pwm1_gpio19: pwm1_gpio19 {
+				brcm,pins = <19>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			pwm1_gpio41: pwm1_gpio41 {
+				brcm,pins = <41>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pwm1_gpio45: pwm1_gpio45 {
+				brcm,pins = <45>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+
+			sdhost_gpio48: sdhost_gpio48 {
+				brcm,pins = <48 49 50 51 52 53>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+
+			spi0_gpio7: spi0_gpio7 {
+				brcm,pins = <7 8 9 10 11>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			spi0_gpio35: spi0_gpio35 {
+				brcm,pins = <35 36 37 38 39>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			spi1_gpio16: spi1_gpio16 {
+				brcm,pins = <16 17 18 19 20 21>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+			spi2_gpio40: spi2_gpio40 {
+				brcm,pins = <40 41 42 43 44 45>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+
+			uart0_gpio14: uart0_gpio14 {
+				brcm,pins = <14 15>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			/* Separate from the uart0_gpio14 group
+			 * because it conflicts with spi1_gpio16, and
+			 * people often run uart0 on the two pins
+			 * without flow contrl.
+			 */
+			uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 {
+				brcm,pins = <16 17>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+			uart0_gpio30: uart0_gpio30 {
+				brcm,pins = <30 31>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+			uart0_ctsrts_gpio32: uart0_ctsrts_gpio32 {
+				brcm,pins = <32 33>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+
+			uart1_gpio14: uart1_gpio14 {
+				brcm,pins = <14 15>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio16: uart1_ctsrts_gpio16 {
+				brcm,pins = <16 17>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_gpio32: uart1_gpio32 {
+				brcm,pins = <32 33>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio30: uart1_ctsrts_gpio30 {
+				brcm,pins = <30 31>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_gpio36: uart1_gpio36 {
+				brcm,pins = <36 37 38 39>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+			uart1_gpio40: uart1_gpio40 {
+				brcm,pins = <40 41>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 {
+				brcm,pins = <42 43>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+		};
+
+		uart0: serial@7e201000 {
+			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
+			reg = <0x7e201000 0x1000>;
+			interrupts = <2 25>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+		};
+
+		i2s: i2s@7e203000 {
+			compatible = "brcm,bcm2835-i2s";
+			reg = <0x7e203000 0x20>,
+			      <0x7e101098 0x02>;
+
+			dmas = <&dma 2>,
+			       <&dma 3>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi: spi@7e204000 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204000 0x1000>;
+			interrupts = <2 22>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@7e205000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e205000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pixelvalve@7e206000 {
+			compatible = "brcm,bcm2835-pixelvalve0";
+			reg = <0x7e206000 0x100>;
+			interrupts = <2 13>; /* pwa0 */
+		};
+
+		pixelvalve@7e207000 {
+			compatible = "brcm,bcm2835-pixelvalve1";
+			reg = <0x7e207000 0x100>;
+			interrupts = <2 14>; /* pwa1 */
+		};
+
+		thermal: thermal@7e212000 {
+			compatible = "brcm,bcm2835-thermal";
+			reg = <0x7e212000 0x8>;
+			clocks = <&clocks BCM2835_CLOCK_TSENS>;
+			status = "disabled";
+		};
+
+		aux: aux@0x7e215000 {
+			compatible = "brcm,bcm2835-aux";
+			#clock-cells = <1>;
+			reg = <0x7e215000 0x8>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+		};
+
+		uart1: serial@7e215040 {
+			compatible = "brcm,bcm2835-aux-uart";
+			reg = <0x7e215040 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_UART>;
+			status = "disabled";
+		};
+
+		spi1: spi@7e215080 {
+			compatible = "brcm,bcm2835-aux-spi";
+			reg = <0x7e215080 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_SPI1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@7e2150c0 {
+			compatible = "brcm,bcm2835-aux-spi";
+			reg = <0x7e2150c0 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_SPI2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm: pwm@7e20c000 {
+			compatible = "brcm,bcm2835-pwm";
+			reg = <0x7e20c000 0x28>;
+			clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clock-rates = <10000000>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		sdhci: sdhci@7e300000 {
+			compatible = "brcm,bcm2835-sdhci";
+			reg = <0x7e300000 0x100>;
+			interrupts = <2 30>;
+			clocks = <&clocks BCM2835_CLOCK_EMMC>;
+			status = "disabled";
+		};
+
+		hvs@7e400000 {
+			compatible = "brcm,bcm2835-hvs";
+			reg = <0x7e400000 0x6000>;
+			interrupts = <2 1>;
+		};
+
+		i2c1: i2c@7e804000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e804000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@7e805000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e805000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pixelvalve@7e807000 {
+			compatible = "brcm,bcm2835-pixelvalve2";
+			reg = <0x7e807000 0x100>;
+			interrupts = <2 10>; /* pixelvalve */
+		};
+
+		hdmi: hdmi@7e902000 {
+			compatible = "brcm,bcm2835-hdmi";
+			reg = <0x7e902000 0x600>,
+			      <0x7e808000 0x100>;
+			interrupts = <2 8>, <2 9>;
+			ddc = <&i2c2>;
+			clocks = <&clocks BCM2835_PLLH_PIX>,
+				 <&clocks BCM2835_CLOCK_HSM>;
+			clock-names = "pixel", "hdmi";
+			status = "disabled";
+		};
+
+		usb: usb@7e980000 {
+			compatible = "brcm,bcm2835-usb";
+			reg = <0x7e980000 0x10000>;
+			interrupts = <1 9>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clk_usb>;
+			clock-names = "otg";
+		};
+
+		v3d: v3d@7ec00000 {
+			compatible = "brcm,bcm2835-v3d";
+			reg = <0x7ec00000 0x1000>;
+			interrupts = <1 10>;
+		};
+
+		vc4: gpu {
+			compatible = "brcm,bcm2835-vc4";
+		};
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* The oscillator is the root of the clock tree. */
+		clk_osc: clock@3 {
+			compatible = "fixed-clock";
+			reg = <3>;
+			#clock-cells = <0>;
+			clock-output-names = "osc";
+			clock-frequency = <19200000>;
+		};
+
+		clk_usb: clock@4 {
+			compatible = "fixed-clock";
+			reg = <4>;
+			#clock-cells = <0>;
+			clock-output-names = "otg";
+			clock-frequency = <480000000>;
+		};
+	};
+};
diff --git a/src/arm64/broadcom/ns2-svk.dts b/src/arm64/broadcom/ns2-svk.dts
index 54ca40c9f711..de8d379f44e2 100644
--- a/src/arm64/broadcom/ns2-svk.dts
+++ b/src/arm64/broadcom/ns2-svk.dts
@@ -40,10 +40,14 @@
 
 	aliases {
 		serial0 = &uart3;
+		serial1 = &uart0;
+		serial2 = &uart1;
+		serial3 = &uart2;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x66130000";
 	};
 
 	memory {
@@ -52,6 +56,18 @@
 	};
 };
 
+&enet {
+	status = "ok";
+};
+
+&pci_phy0 {
+	status = "ok";
+};
+
+&pci_phy1 {
+	status = "ok";
+};
+
 &pcie0 {
 	status = "ok";
 };
@@ -68,6 +84,18 @@
 	status = "ok";
 };
 
+&uart0 {
+	status = "ok";
+};
+
+&uart1 {
+	status = "ok";
+};
+
+&uart2 {
+	status = "ok";
+};
+
 &uart3 {
 	status = "ok";
 };
@@ -117,10 +145,26 @@
 	};
 };
 
+&sata_phy0 {
+	status = "ok";
+};
+
+&sata_phy1 {
+	status = "ok";
+};
+
+&sata {
+	status = "ok";
+};
+
 &sdio0 {
 	status = "ok";
 };
 
+&sdio1 {
+	status = "ok";
+};
+
 &nand {
 	nandcs@0 {
 		compatible = "brcm,nandcs";
@@ -128,7 +172,61 @@
 		nand-ecc-mode = "hw";
 		nand-ecc-strength = <8>;
 		nand-ecc-step-size = <512>;
+		nand-bus-width = <16>;
+		brcm,nand-oob-sector-size = <16>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&mdio_mux_iproc {
+	mdio@10 {
+		gphy0: eth-phy@10 {
+			enet-phy-lane-swap;
+			reg = <0x10>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&qspi {
+	bspi-sel = <0>;
+	flash: m25p80@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
 	};
 };
diff --git a/src/arm64/broadcom/ns2.dtsi b/src/arm64/broadcom/ns2.dtsi
index ec68ec1a80c8..4fcdeca3a983 100644
--- a/src/arm64/broadcom/ns2.dtsi
+++ b/src/arm64/broadcom/ns2.dtsi
@@ -88,13 +88,13 @@
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) |
-			      IRQ_TYPE_EDGE_RISING)>,
+			      IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xff) |
-			      IRQ_TYPE_EDGE_RISING)>,
+			      IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xff) |
-			      IRQ_TYPE_EDGE_RISING)>,
+			      IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xff) |
-			      IRQ_TYPE_EDGE_RISING)>;
+			      IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	pmu {
@@ -133,6 +133,9 @@
 
 		status = "disabled";
 
+		phys = <&pci_phy0>;
+		phy-names = "pcie-phy";
+
 		msi-parent = <&msi0>;
 		msi0: msi@20020000 {
 			compatible = "brcm,iproc-msi";
@@ -171,6 +174,9 @@
 
 		status = "disabled";
 
+		phys = <&pci_phy1>;
+		phy-names = "pcie-phy";
+
 		msi-parent = <&msi4>;
 		msi4: msi@50020000 {
 			compatible = "brcm,iproc-msi";
@@ -191,6 +197,54 @@
 
 		#include "ns2-clock.dtsi"
 
+		enet: ethernet@61000000 {
+			compatible = "brcm,ns2-amac";
+			reg = <0x61000000 0x1000>,
+			      <0x61090000 0x1000>,
+			      <0x61030000 0x100>;
+			reg-names = "amac_base", "idm_base", "nicpm_base";
+			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+			phy-handle = <&gphy0>;
+			phy-mode = "rgmii";
+			status = "disabled";
+		};
+
+		pdc0: iproc-pdc0@612c0000 {
+			compatible = "brcm,iproc-pdc-mbox";
+			reg = <0x612c0000 0x445>;  /* PDC FS0 regs */
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+			brcm,rx-status-len = <32>;
+			brcm,use-bcm-hdr;
+		};
+
+		pdc1: iproc-pdc1@612e0000 {
+			compatible = "brcm,iproc-pdc-mbox";
+			reg = <0x612e0000 0x445>;  /* PDC FS1 regs */
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+			brcm,rx-status-len = <32>;
+			brcm,use-bcm-hdr;
+		};
+
+		pdc2: iproc-pdc2@61300000 {
+			compatible = "brcm,iproc-pdc-mbox";
+			reg = <0x61300000 0x445>;  /* PDC FS2 regs */
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+			brcm,rx-status-len = <32>;
+			brcm,use-bcm-hdr;
+		};
+
+		pdc3: iproc-pdc3@61320000 {
+			compatible = "brcm,iproc-pdc-mbox";
+			reg = <0x61320000 0x445>;  /* PDC FS3 regs */
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+			brcm,rx-status-len = <32>;
+			brcm,use-bcm-hdr;
+		};
+
 		dma0: dma@61360000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x61360000 0x1000>;
@@ -248,7 +302,23 @@
 				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
-			mmu-masters;
+			#iommu-cells = <1>;
+		};
+
+		pinctrl: pinctrl@6501d130 {
+			compatible = "brcm,ns2-pinmux";
+			reg = <0x6501d130 0x08>,
+			      <0x660a0028 0x04>,
+			      <0x660009b0 0x40>;
+		};
+
+		gpio_aon: gpio@65024800 {
+			compatible = "brcm,iproc-gpio";
+			reg = <0x65024800 0x50>,
+			      <0x65024008 0x18>;
+			ngpios = <6>;
+			#gpio-cells = <2>;
+			gpio-controller;
 		};
 
 		gic: interrupt-controller@65210000 {
@@ -263,6 +333,73 @@
 				      IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
+		cci@65590000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x65590000 0x1000>;
+			ranges = <0 0x65590000 0x10000>;
+
+			pmu@9000 {
+				compatible = "arm,cci-400-pmu,r1",
+					     "arm,cci-400-pmu";
+				reg = <0x9000 0x4000>;
+				interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pwm: pwm@66010000 {
+			compatible = "brcm,iproc-pwm";
+			reg = <0x66010000 0x28>;
+			clocks = <&osc>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		mdio_mux_iproc: mdio-mux@6602023c {
+			compatible = "brcm,mdio-mux-iproc";
+			reg = <0x6602023c 0x14>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mdio@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pci_phy0: pci-phy@0 {
+					compatible = "brcm,ns2-pcie-phy";
+					reg = <0x0>;
+					#phy-cells = <0>;
+					status = "disabled";
+				};
+			};
+
+			mdio@7 {
+				reg = <0x7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pci_phy1: pci-phy@0 {
+					compatible = "brcm,ns2-pcie-phy";
+					reg = <0x0>;
+					#phy-cells = <0>;
+					status = "disabled";
+				};
+			};
+
+			mdio@10 {
+				reg = <0x10>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		timer0: timer@66030000 {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x66030000 0x1000>;
@@ -321,6 +458,16 @@
 			clock-names = "wdogclk", "apb_pclk";
 		};
 
+		gpio_g: gpio@660a0000 {
+			compatible = "brcm,iproc-gpio";
+			reg = <0x660a0000 0x50>;
+			ngpios = <32>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		i2c1: i2c@660b0000 {
 			compatible = "brcm,iproc-i2c";
 			reg = <0x660b0000 0x100>;
@@ -331,6 +478,36 @@
 			status = "disabled";
 		};
 
+		uart0: serial@66100000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x66100000 0x100>;
+			interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart1: serial@66110000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x66110000 0x100>;
+			interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart2: serial@66120000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x66120000 0x100>;
+			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
 		uart3: serial@66130000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x66130000 0x100>;
@@ -368,6 +545,49 @@
 			reg = <0x66220000 0x28>;
 		};
 
+		sata_phy: sata_phy@663f0100 {
+			compatible = "brcm,iproc-ns2-sata-phy";
+			reg = <0x663f0100 0x1f00>,
+			      <0x663f004c 0x10>;
+			reg-names = "phy", "phy-ctrl";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		sata: ahci@663f2000 {
+			compatible = "brcm,iproc-ahci", "generic-ahci";
+			reg = <0x663f2000 0x1000>;
+			reg-names = "ahci";
+			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+				phy-names = "sata-phy";
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+				phy-names = "sata-phy";
+			};
+		};
+
 		sdio0: sdhci@66420000 {
 			compatible = "brcm,sdhci-iproc-cygnus";
 			reg = <0x66420000 0x100>;
@@ -399,5 +619,23 @@
 
 			brcm,nand-has-wp;
 		};
+
+		qspi: spi@66470200 {
+			compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi";
+			reg = <0x66470200 0x184>,
+				<0x66470000 0x124>,
+				<0x67017408 0x004>,
+				<0x664703a0 0x01c>;
+			reg-names = "mspi", "bspi", "intr_regs",
+				"intr_status_reg";
+			interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "spi_l1_intr";
+			clocks = <&iprocmed>;
+			clock-names = "iprocmed";
+			num-cs = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 	};
 };
diff --git a/src/arm64/cavium/thunder-88xx.dtsi b/src/arm64/cavium/thunder-88xx.dtsi
index 2eb9b225f0bc..04dc8a8d1539 100644
--- a/src/arm64/cavium/thunder-88xx.dtsi
+++ b/src/arm64/cavium/thunder-88xx.dtsi
@@ -354,10 +354,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0xff01>,
-		             <1 14 0xff01>,
-		             <1 11 0xff01>,
-		             <1 10 0xff01>;
+		interrupts = <1 13 4>,
+		             <1 14 4>,
+		             <1 11 4>,
+		             <1 10 4>;
 	};
 
 	pmu {
diff --git a/src/arm64/exynos/exynos5433-pinctrl.dtsi b/src/arm64/exynos/exynos5433-pinctrl.dtsi
new file mode 100644
index 000000000000..ad71247b074f
--- /dev/null
+++ b/src/arm64/exynos/exynos5433-pinctrl.dtsi
@@ -0,0 +1,804 @@
+/*
+ * Samsung's Exynos5433 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * Samsung's Exynos5433 SoC pin-mux and pin-config options are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define PIN_PULL_NONE		0
+#define PIN_PULL_DOWN		1
+#define PIN_PULL_UP		3
+
+#define PIN_DRV_LV1		0
+#define PIN_DRV_LV2		2
+#define PIN_DRV_LV3		1
+#define PIN_DRV_LV4		3
+
+#define PIN_IN			0
+#define PIN_OUT			1
+#define PIN_FUNC1		2
+
+#define PIN(_func, _pin, _pull, _drv)			\
+	_pin {						\
+		samsung,pins = #_pin;			\
+		samsung,pin-function = <PIN_ ##_func>;	\
+		samsung,pin-pud = <PIN_PULL_ ##_pull>;	\
+		samsung,pin-drv = <PIN_DRV_ ##_drv>;	\
+	}
+
+&pinctrl_alive {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa3: gpa3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf5: gpf5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_aud {
+	gpz0: gpz0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpz1: gpz1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2s0_bus: i2s0-bus {
+		samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
+				"gpz0-4", "gpz0-5", "gpz0-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm0_bus: pcm0-bus {
+		samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart_aud_bus: uart-aud-bus {
+		samsung,pins = "gpz1-3", "gpz1-2", "gpz1-1", "gpz1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_cpif {
+	gpv6: gpv6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_ese {
+	gpj2: gpj2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_finger {
+	gpd5: gpd5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpd5-0", "gpd5-2", "gpd5-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c6_bus: hs-i2c6-bus {
+		samsung,pins = "gpd5-3", "gpd5-2";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_fsys {
+	gph1: gph1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr4: gpr4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr0: gpr0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr1: gpr1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr2: gpr2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr3: gpr3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpr0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_rdqs: sd0-rdqs {
+		samsung,pins = "gpr0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_qrdy: sd0-qrdy {
+		samsung,pins = "gpr0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpr1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpr2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpr2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpr3-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus8: sd1-bus-width8 {
+		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	pcie_bus: pcie_bus {
+		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpr4-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpr4-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpr4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_clk_output: sd2-clk-output {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <2>;
+	};
+
+	sd2_cmd_output: sd2-cmd-output {
+		samsung,pins = "gpr4-1";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <2>;
+	};
+};
+
+&pinctrl_imem {
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_nfc {
+	gpj0: gpj0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c4_bus: hs-i2c4-bus {
+		samsung,pins = "gpj0-1", "gpj0-0";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_peric {
+	gpv7: gpv7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd4: gpd4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd8: gpd8 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd6: gpd6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd7: gpd7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c8_bus: hs-i2c8-bus {
+		samsung,pins = "gpb0-1", "gpb0-0";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c9_bus: hs-i2c9-bus {
+		samsung,pins = "gpb0-3", "gpb0-2";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
+				"gpd4-3", "gpd4-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm1_bus: pcm1-bus {
+		samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
+				"gpd4-3", "gpd4-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+
+	spdif_bus: spdif-bus {
+		samsung,pins = "gpd4-3", "gpd4-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_spi_pin0: fimc-is-spi-pin0 {
+		samsung,pins = "gpc3-3", "gpc3-2", "gpc3-1", "gpc3-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_spi_pin1: fimc-is-spi-pin1 {
+		samsung,pins = "gpc3-7", "gpc3-6", "gpc3-5", "gpc3-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_bus: uart0-bus {
+		samsung,pins = "gpd0-3", "gpd0-2", "gpd0-1", "gpd0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+	};
+
+	hs_i2c2_bus: hs-i2c2-bus {
+		samsung,pins = "gpd0-3", "gpd0-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_bus: uart2-bus {
+		samsung,pins = "gpd1-5", "gpd1-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+	};
+
+	uart1_bus: uart1-bus {
+		samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+	};
+
+	hs_i2c3_bus: hs-i2c3-bus {
+		samsung,pins = "gpd1-3", "gpd1-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c0_bus: hs-i2c0-bus {
+		samsung,pins = "gpd2-1", "gpd2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c1_bus: hs-i2c1-bus {
+		samsung,pins = "gpd2-3", "gpd2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpd2-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpd2-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpd2-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpd2-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpd6-2", "gpd6-4", "gpd6-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c7_bus: hs-i2c7-bus {
+		samsung,pins = "gpd2-7", "gpd2-6";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpd8-0", "gpd6-0", "gpd6-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c10_bus: hs-i2c10-bus {
+		samsung,pins = "gpg3-1", "gpg3-0";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c11_bus: hs-i2c11-bus {
+		samsung,pins = "gpg3-3", "gpg3-2";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi3_bus: spi3-bus {
+		samsung,pins = "gpg3-4", "gpg3-6", "gpg3-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi4_bus: spi4-bus {
+		samsung,pins = "gpv7-1", "gpv7-3", "gpv7-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_uart: fimc-is-uart {
+		samsung,pins = "gpc1-1", "gpc0-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_ch0_i2c: fimc-is-ch0_i2c {
+		samsung,pins = "gpc2-1", "gpc2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_ch0_mclk: fimc-is-ch0_mclk {
+		samsung,pins = "gpd7-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_ch1_i2c: fimc-is-ch1-i2c {
+		samsung,pins = "gpc2-3", "gpc2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_ch1_mclk: fimc-is-ch1-mclk {
+		samsung,pins = "gpd7-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_ch2_i2c: fimc-is-ch2-i2c {
+		samsung,pins = "gpc2-5", "gpc2-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_ch2_mclk: fimc-is-ch2-mclk {
+		samsung,pins = "gpd7-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_touch {
+	gpj1: gpj1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c5_bus: hs-i2c5-bus {
+		samsung,pins = "gpj1-1", "gpj1-0";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
diff --git a/src/arm64/exynos/exynos5433-tm2.dts b/src/arm64/exynos/exynos5433-tm2.dts
new file mode 100644
index 000000000000..f21bdc2ff834
--- /dev/null
+++ b/src/arm64/exynos/exynos5433-tm2.dts
@@ -0,0 +1,1049 @@
+/*
+ * SAMSUNG Exynos5433 TM2 board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Device tree source file for Samsung's TM2 board which is based on
+ * Samsung Exynos5433 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos5433.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung TM2 board";
+	compatible = "samsung,tm2", "samsung,exynos5433";
+
+	aliases {
+		gsc0 = &gsc_0;
+		gsc1 = &gsc_1;
+		gsc2 = &gsc_2;
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_aud;
+		pinctrl2 = &pinctrl_cpif;
+		pinctrl3 = &pinctrl_ese;
+		pinctrl4 = &pinctrl_finger;
+		pinctrl5 = &pinctrl_fsys;
+		pinctrl6 = &pinctrl_imem;
+		pinctrl7 = &pinctrl_nfc;
+		pinctrl8 = &pinctrl_peric;
+		pinctrl9 = &pinctrl_touch;
+		serial0 = &serial_0;
+		serial1 = &serial_1;
+		serial2 = &serial_2;
+		serial3 = &serial_3;
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		spi2 = &spi_2;
+		spi3 = &spi_3;
+		spi4 = &spi_4;
+		mshc0 = &mshc_0;
+		mshc2 = &mshc_2;
+	};
+
+	chosen {
+		stdout-path = &serial_1;
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x0 0x20000000 0x0 0xc0000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power-key {
+			gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "power key";
+			debounce-interval = <10>;
+		};
+
+		volume-up-key {
+			gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			label = "volume-up key";
+			debounce-interval = <10>;
+		};
+
+		volume-down-key {
+			gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "volume-down key";
+			debounce-interval = <10>;
+		};
+
+		homepage-key {
+			gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+			label = "homepage key";
+			debounce-interval = <10>;
+		};
+	};
+
+	i2c_max98504: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
+			 &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		max98504: max98504@31 {
+			compatible = "maxim,max98504";
+			reg = <0x31>;
+			maxim,rx-path = <1>;
+			maxim,tx-path = <1>;
+			maxim,tx-channel-mask = <3>;
+			maxim,tx-channel-source = <2>;
+		};
+	};
+
+	sound {
+		compatible = "samsung,tm2-audio";
+		audio-codec = <&wm5110>;
+		i2s-controller = <&i2s0>;
+		audio-amplifier = <&max98504>;
+		mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
+		model = "wm5110";
+		samsung,audio-routing =
+			/* Headphone */
+			"HP", "HPOUT1L",
+			"HP", "HPOUT1R",
+
+			/* Speaker */
+			"SPK", "SPKOUT",
+			"SPKOUT", "HPOUT2L",
+			"SPKOUT", "HPOUT2R",
+
+			/* Receiver */
+			"RCV", "HPOUT3L",
+			"RCV", "HPOUT3R";
+		status = "okay";
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo3_reg>;
+	status = "okay";
+
+	thermistor-ap {
+		compatible = "murata,ncp03wf104";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 0>;
+	};
+
+	thermistor-battery {
+		compatible = "murata,ncp03wf104";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 1>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor-charger {
+		compatible = "murata,ncp03wf104";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 2>;
+	};
+};
+
+&cmu_aud {
+	assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
+	assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
+};
+
+&cmu_fsys {
+	assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
+		<&cmu_top CLK_MOUT_SCLK_USBHOST30>,
+		<&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
+		<&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
+		<&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
+		<&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
+		<&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
+		<&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
+		<&cmu_top CLK_DIV_SCLK_USBDRD30>,
+		<&cmu_top CLK_DIV_SCLK_USBHOST30>;
+	assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
+		<&cmu_top CLK_MOUT_BUS_PLL_USER>,
+		<&cmu_top CLK_SCLK_USBDRD30_FSYS>,
+		<&cmu_top CLK_SCLK_USBHOST30_FSYS>,
+		<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
+		<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
+		<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
+		<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
+	assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
+			       <66700000>, <66700000>;
+};
+
+&cmu_gscl {
+	assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
+			  <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
+	assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
+				 <&cmu_top CLK_ACLK_GSCL_333>;
+};
+
+&cmu_mfc {
+	assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
+	assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
+};
+
+&cmu_mscl {
+	assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
+			  <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
+			  <&cmu_mscl CLK_MOUT_SCLK_JPEG>,
+			  <&cmu_top CLK_MOUT_SCLK_JPEG_A>;
+	assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
+				 <&cmu_top CLK_SCLK_JPEG_MSCL>,
+				 <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
+				 <&cmu_top CLK_MOUT_BUS_PLL_USER>;
+};
+
+&cpu0 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&decon {
+	status = "okay";
+
+	i80-if-timings {
+	};
+};
+
+&dsi {
+	status = "okay";
+	vddcore-supply = <&ldo6_reg>;
+	vddio-supply = <&ldo7_reg>;
+	samsung,pll-clock-frequency = <24000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&te_irq>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				samsung,burst-clock-frequency = <512000000>;
+				samsung,esc-clock-frequency = <16000000>;
+			};
+		};
+	};
+};
+
+&hsi2c_0 {
+	status = "okay";
+	clock-frequency = <2500000>;
+
+	s2mps13-pmic@66 {
+		compatible = "samsung,s2mps13-pmic";
+		interrupt-parent = <&gpa0>;
+		interrupts = <7 IRQ_TYPE_NONE>;
+		reg = <0x66>;
+		samsung,s2mps11-wrstbi-ground;
+
+		s2mps13_osc: clocks {
+			compatible = "samsung,s2mps13-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps13_ap", "s2mps13_cp",
+				"s2mps13_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE_0.9V_AP";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDDQ_MMC2_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VDD1_E_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDD10_MIF_PLL_1.0V_AP";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VDD10_DPLL_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VDD10_MIPI2L_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD18_MIPI2L_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VDD18_LLI_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VDD18_ABB_ETC_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDD33_USB30_3.0V_AP";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD_INT_M_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD_KFC_M_1.1V_AP";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VDD_G3D_M_0.95V_AP";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <950000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VDDQ_M1_LDO_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VDDQ_M2_LDO_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VDDQ_EFUSE";
+				regulator-min-microvolt = <1400000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-always-on;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "V_TFLASH_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "V_CODEC_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "VDDA_1.8V_COMP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VCC_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VT_CAM_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "CAM_IO_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "CAM_SEN_CORE_1.2V_AP";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "VT_CAM_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "CAM_SEN_A2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "CAM_AF_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "VCC_3.0V_LCD_AP";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "VCC_1.8V_LCD_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo29_reg: LDO29 {
+				regulator-name = "VT_CAM_2.8V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo30_reg: LDO30 {
+				regulator-name = "TSP_AVDD_3.3V_AP";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo31_reg: LDO31 {
+				regulator-name = "TSP_VDD_1.85V_AP";
+				regulator-min-microvolt = <1850000>;
+				regulator-max-microvolt = <1850000>;
+			};
+
+			ldo32_reg: LDO32 {
+				regulator-name = "VTOUCH_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo33_reg: LDO33 {
+				regulator-name = "VTOUCH_LED_3.3V";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+			};
+
+			ldo34_reg: LDO34 {
+				regulator-name = "VCC_1.8V_MHL_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <2100000>;
+			};
+
+			ldo35_reg: LDO35 {
+				regulator-name = "OIS_VM_2.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo36_reg: LDO36 {
+				regulator-name = "VSIL_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo37_reg: LDO37 {
+				regulator-name = "VF_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo38_reg: LDO38 {
+				regulator-name = "VCC_3.0V_MOTOR_AP";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo39_reg: LDO39 {
+				regulator-name = "V_HRM_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo40_reg: LDO40 {
+				regulator-name = "V_HRM_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_MIF_0.9V_AP";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_EGL_1.0V_AP";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_KFC_1.0V_AP";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VDD_INT_0.95V_AP";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VDD_DISP_CAM0_0.9V_AP";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "VDD_G3D_0.9V_AP";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "VDD_MEM1_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "VDD_LLDO_1.35V_AP";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "VDD_MLDO_2.0V_AP";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "vdd_mem2";
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&hsi2c_8 {
+	status = "okay";
+
+	max77843@66 {
+		compatible = "maxim,max77843";
+		interrupt-parent = <&gpa1>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x66>;
+
+		muic: max77843-muic {
+			compatible = "maxim,max77843-muic";
+		};
+
+		regulators {
+			compatible = "maxim,max77843-regulator";
+			safeout1_reg: SAFEOUT1 {
+				regulator-name = "SAFEOUT1";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <4950000>;
+			};
+
+			safeout2_reg: SAFEOUT2 {
+				regulator-name = "SAFEOUT2";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <4950000>;
+			};
+
+			charger_reg: CHARGER {
+				regulator-name = "CHARGER";
+				regulator-min-microamp = <100000>;
+				regulator-max-microamp = <3150000>;
+			};
+		};
+
+		haptic: max77843-haptic {
+			compatible = "maxim,max77843-haptic";
+			haptic-supply = <&ldo38_reg>;
+			pwms = <&pwm 0 33670 0>;
+			pwm-names = "haptic";
+		};
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&mshc_0 {
+	status = "okay";
+	num-slots = <1>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-highspeed;
+	non-removable;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-hs400-timing = <0 3>;
+	samsung,read-strobe-delay = <90>;
+	fifo-depth = <0x80>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
+			&sd0_bus8 &sd0_rdqs>;
+	bus-width = <8>;
+	assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
+	assigned-clock-rates = <800000000>;
+};
+
+&mshc_2 {
+	status = "okay";
+	num-slots = <1>;
+	cap-sd-highspeed;
+	disable-wp;
+	cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	fifo-depth = <0x80>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
+	bus-width = <4>;
+};
+
+&pinctrl_alive {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_alive>;
+
+	initial_alive: initial-state {
+		PIN(IN, gpa0-0, DOWN, LV1);
+		PIN(IN, gpa0-1, NONE, LV1);
+		PIN(IN, gpa0-2, DOWN, LV1);
+		PIN(IN, gpa0-3, NONE, LV1);
+		PIN(IN, gpa0-4, NONE, LV1);
+		PIN(IN, gpa0-5, DOWN, LV1);
+		PIN(IN, gpa0-6, NONE, LV1);
+		PIN(IN, gpa0-7, NONE, LV1);
+
+		PIN(IN, gpa1-0, UP, LV1);
+		PIN(IN, gpa1-1, NONE, LV1);
+		PIN(IN, gpa1-2, NONE, LV1);
+		PIN(IN, gpa1-3, DOWN, LV1);
+		PIN(IN, gpa1-4, DOWN, LV1);
+		PIN(IN, gpa1-5, NONE, LV1);
+		PIN(IN, gpa1-6, NONE, LV1);
+		PIN(IN, gpa1-7, NONE, LV1);
+
+		PIN(IN, gpa2-0, NONE, LV1);
+		PIN(IN, gpa2-1, NONE, LV1);
+		PIN(IN, gpa2-2, NONE, LV1);
+		PIN(IN, gpa2-3, DOWN, LV1);
+		PIN(IN, gpa2-4, NONE, LV1);
+		PIN(IN, gpa2-5, DOWN, LV1);
+		PIN(IN, gpa2-6, DOWN, LV1);
+		PIN(IN, gpa2-7, NONE, LV1);
+
+		PIN(IN, gpa3-0, DOWN, LV1);
+		PIN(IN, gpa3-1, DOWN, LV1);
+		PIN(IN, gpa3-2, NONE, LV1);
+		PIN(IN, gpa3-3, DOWN, LV1);
+		PIN(IN, gpa3-4, NONE, LV1);
+		PIN(IN, gpa3-5, DOWN, LV1);
+		PIN(IN, gpa3-6, DOWN, LV1);
+		PIN(IN, gpa3-7, DOWN, LV1);
+
+		PIN(IN, gpf1-0, NONE, LV1);
+		PIN(IN, gpf1-1, NONE, LV1);
+		PIN(IN, gpf1-2, DOWN, LV1);
+		PIN(IN, gpf1-4, UP, LV1);
+		PIN(OUT, gpf1-5, NONE, LV1);
+		PIN(IN, gpf1-6, DOWN, LV1);
+		PIN(IN, gpf1-7, DOWN, LV1);
+
+		PIN(IN, gpf2-0, DOWN, LV1);
+		PIN(IN, gpf2-1, DOWN, LV1);
+		PIN(IN, gpf2-2, DOWN, LV1);
+		PIN(IN, gpf2-3, DOWN, LV1);
+
+		PIN(IN, gpf3-0, DOWN, LV1);
+		PIN(IN, gpf3-1, DOWN, LV1);
+		PIN(IN, gpf3-2, NONE, LV1);
+		PIN(IN, gpf3-3, DOWN, LV1);
+
+		PIN(IN, gpf4-0, DOWN, LV1);
+		PIN(IN, gpf4-1, DOWN, LV1);
+		PIN(IN, gpf4-2, DOWN, LV1);
+		PIN(IN, gpf4-3, DOWN, LV1);
+		PIN(IN, gpf4-4, DOWN, LV1);
+		PIN(IN, gpf4-5, DOWN, LV1);
+		PIN(IN, gpf4-6, DOWN, LV1);
+		PIN(IN, gpf4-7, DOWN, LV1);
+
+		PIN(IN, gpf5-0, DOWN, LV1);
+		PIN(IN, gpf5-1, DOWN, LV1);
+		PIN(IN, gpf5-2, DOWN, LV1);
+		PIN(IN, gpf5-3, DOWN, LV1);
+		PIN(OUT, gpf5-4, NONE, LV1);
+		PIN(IN, gpf5-5, DOWN, LV1);
+		PIN(IN, gpf5-6, DOWN, LV1);
+		PIN(IN, gpf5-7, DOWN, LV1);
+	};
+
+	te_irq: te_irq {
+		samsung,pins = "gpf1-3";
+		samsung,pin-function = <0xf>;
+	};
+};
+
+&pinctrl_cpif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_cpif>;
+
+	initial_cpif: initial-state {
+		PIN(IN, gpv6-0, DOWN, LV1);
+		PIN(IN, gpv6-1, DOWN, LV1);
+	};
+};
+
+&pinctrl_ese {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_ese>;
+
+	initial_ese: initial-state {
+		PIN(IN, gpj2-0, DOWN, LV1);
+		PIN(IN, gpj2-1, DOWN, LV1);
+		PIN(IN, gpj2-2, DOWN, LV1);
+	};
+};
+
+&pinctrl_fsys {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_fsys>;
+
+	initial_fsys: initial-state {
+		PIN(IN, gpr3-0, NONE, LV1);
+		PIN(IN, gpr3-1, DOWN, LV1);
+		PIN(IN, gpr3-2, DOWN, LV1);
+		PIN(IN, gpr3-3, DOWN, LV1);
+		PIN(IN, gpr3-7, NONE, LV1);
+	};
+};
+
+&pinctrl_imem {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_imem>;
+
+	initial_imem: initial-state {
+		PIN(IN, gpf0-0, UP, LV1);
+		PIN(IN, gpf0-1, UP, LV1);
+		PIN(IN, gpf0-2, DOWN, LV1);
+		PIN(IN, gpf0-3, UP, LV1);
+		PIN(IN, gpf0-4, DOWN, LV1);
+		PIN(IN, gpf0-5, NONE, LV1);
+		PIN(IN, gpf0-6, DOWN, LV1);
+		PIN(IN, gpf0-7, UP, LV1);
+	};
+};
+
+&pinctrl_nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_nfc>;
+
+	initial_nfc: initial-state {
+		PIN(IN, gpj0-2, DOWN, LV1);
+	};
+};
+
+&pinctrl_peric {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_peric>;
+
+	initial_peric: initial-state {
+		PIN(IN, gpv7-0, DOWN, LV1);
+		PIN(IN, gpv7-1, DOWN, LV1);
+		PIN(IN, gpv7-2, NONE, LV1);
+		PIN(IN, gpv7-3, DOWN, LV1);
+		PIN(IN, gpv7-4, DOWN, LV1);
+		PIN(IN, gpv7-5, DOWN, LV1);
+
+		PIN(IN, gpb0-4, DOWN, LV1);
+
+		PIN(IN, gpc0-2, DOWN, LV1);
+		PIN(IN, gpc0-5, DOWN, LV1);
+		PIN(IN, gpc0-7, DOWN, LV1);
+
+		PIN(IN, gpc1-1, DOWN, LV1);
+
+		PIN(IN, gpc3-4, NONE, LV1);
+		PIN(IN, gpc3-5, NONE, LV1);
+		PIN(IN, gpc3-6, NONE, LV1);
+		PIN(IN, gpc3-7, NONE, LV1);
+
+		PIN(OUT, gpg0-0, NONE, LV1);
+		PIN(FUNC1, gpg0-1, DOWN, LV1);
+
+		PIN(IN, gpd2-5, DOWN, LV1);
+
+		PIN(IN, gpd4-0, NONE, LV1);
+		PIN(IN, gpd4-1, DOWN, LV1);
+		PIN(IN, gpd4-2, DOWN, LV1);
+		PIN(IN, gpd4-3, DOWN, LV1);
+		PIN(IN, gpd4-4, DOWN, LV1);
+
+		PIN(IN, gpd6-3, DOWN, LV1);
+
+		PIN(IN, gpd8-1, UP, LV1);
+
+		PIN(IN, gpg1-0, DOWN, LV1);
+		PIN(IN, gpg1-1, DOWN, LV1);
+		PIN(IN, gpg1-2, DOWN, LV1);
+		PIN(IN, gpg1-3, DOWN, LV1);
+		PIN(IN, gpg1-4, DOWN, LV1);
+
+		PIN(IN, gpg2-0, DOWN, LV1);
+		PIN(IN, gpg2-1, DOWN, LV1);
+
+		PIN(IN, gpg3-0, DOWN, LV1);
+		PIN(IN, gpg3-1, DOWN, LV1);
+		PIN(IN, gpg3-5, DOWN, LV1);
+		PIN(IN, gpg3-7, DOWN, LV1);
+	};
+};
+
+&pinctrl_touch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_touch>;
+
+	initial_touch: initial-state {
+		PIN(IN, gpj1-2, DOWN, LV1);
+	};
+};
+
+&pwm {
+	pinctrl-0 = <&pwm0_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mic {
+	status = "okay";
+
+	i80-if-timings {
+	};
+};
+
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents = <&xxti>;
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&spi_1 {
+	cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	wm5110: wm5110-codec@0 {
+		compatible = "wlf,wm5110";
+		reg = <0x0>;
+		spi-max-frequency = <20000000>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <4 IRQ_TYPE_NONE>;
+		clocks = <&pmu_system_controller 0>,
+			<&s2mps13_osc S2MPS11_CLK_BT>;
+		clock-names = "mclk1", "mclk2";
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		wlf,micd-detect-debounce = <300>;
+		wlf,micd-bias-start-time = <0x1>;
+		wlf,micd-rate = <0x7>;
+		wlf,micd-dbtime = <0x1>;
+		wlf,micd-force-micbias;
+		wlf,micd-configs = <0x0 1 0>;
+		wlf,hpdet-channel = <1>;
+		wlf,gpsw = <0x1>;
+		wlf,inmode = <2 0 2 0>;
+
+		wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
+		wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
+
+		/* core supplies */
+		AVDD-supply = <&ldo18_reg>;
+		DBVDD1-supply = <&ldo18_reg>;
+		CPVDD-supply = <&ldo18_reg>;
+		DBVDD2-supply = <&ldo18_reg>;
+		DBVDD3-supply = <&ldo18_reg>;
+
+		controller-data {
+			samsung,spi-feedback-delay = <0>;
+		};
+	};
+};
+
+&timer {
+	clock-frequency = <24000000>;
+};
+
+&tmu_atlas0 {
+	vtmu-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&tmu_apollo {
+	vtmu-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&tmu_g3d {
+	vtmu-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&usbdrd30 {
+	vdd33-supply = <&ldo10_reg>;
+	vdd10-supply = <&ldo6_reg>;
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "otg";
+};
+
+&usbdrd30_phy {
+	vbus-supply = <&safeout1_reg>;
+	status = "okay";
+};
+
+&xxti {
+	clock-frequency = <24000000>;
+};
diff --git a/src/arm64/exynos/exynos5433-tm2e.dts b/src/arm64/exynos/exynos5433-tm2e.dts
new file mode 100644
index 000000000000..1db4e7f363a9
--- /dev/null
+++ b/src/arm64/exynos/exynos5433-tm2e.dts
@@ -0,0 +1,41 @@
+/*
+ * SAMSUNG Exynos5433 TM2E board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Device tree source file for Samsung's TM2E(TM2 EDGE) board which is based on
+ * Samsung Exynos5433 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "exynos5433-tm2.dts"
+
+/ {
+	model = "Samsung TM2E board";
+	compatible = "samsung,tm2e", "samsung,exynos5433";
+};
+
+&ldo23_reg {
+	regulator-name = "CAM_SEN_CORE_1.025V_AP";
+	regulator-max-microvolt = <1050000>;
+};
+
+&ldo25_reg {
+	regulator-name = "UNUSED_LDO25";
+	regulator-always-off;
+};
+
+&ldo31_reg {
+	regulator-name = "TSP_VDD_1.8V_AP";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&ldo38_reg {
+	regulator-name = "VCC_3.3V_MOTOR_AP";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
diff --git a/src/arm64/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi b/src/arm64/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
new file mode 100644
index 000000000000..9be2978f1b9a
--- /dev/null
+++ b/src/arm64/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
@@ -0,0 +1,23 @@
+/*
+ * Device tree sources for Exynos5433 TMU sensor configuration
+ *
+ * Copyright (c) 2016 Jonghwa Lee <jonghwa3.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/thermal/thermal_exynos.h>
+
+#thermal-sensor-cells = <0>;
+samsung,tmu_gain = <8>;
+samsung,tmu_reference_voltage = <23>;
+samsung,tmu_noise_cancel_mode = <4>;
+samsung,tmu_efuse_value = <75>;
+samsung,tmu_min_efuse_value = <40>;
+samsung,tmu_max_efuse_value = <150>;
+samsung,tmu_first_point_trim = <25>;
+samsung,tmu_second_point_trim = <85>;
+samsung,tmu_default_temp_offset = <50>;
+samsung,tmu_mux_addr = <6>;
diff --git a/src/arm64/exynos/exynos5433-tmu-sensor-conf.dtsi b/src/arm64/exynos/exynos5433-tmu-sensor-conf.dtsi
new file mode 100644
index 000000000000..125fe58d77ce
--- /dev/null
+++ b/src/arm64/exynos/exynos5433-tmu-sensor-conf.dtsi
@@ -0,0 +1,22 @@
+/*
+ * Device tree sources for Exynos5433 TMU sensor configuration
+ *
+ * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/thermal/thermal_exynos.h>
+
+#thermal-sensor-cells = <0>;
+samsung,tmu_gain = <8>;
+samsung,tmu_reference_voltage = <16>;
+samsung,tmu_noise_cancel_mode = <4>;
+samsung,tmu_efuse_value = <75>;
+samsung,tmu_min_efuse_value = <40>;
+samsung,tmu_max_efuse_value = <150>;
+samsung,tmu_first_point_trim = <25>;
+samsung,tmu_second_point_trim = <85>;
+samsung,tmu_default_temp_offset = <50>;
diff --git a/src/arm64/exynos/exynos5433-tmu.dtsi b/src/arm64/exynos/exynos5433-tmu.dtsi
new file mode 100644
index 000000000000..ceaa05145b8a
--- /dev/null
+++ b/src/arm64/exynos/exynos5433-tmu.dtsi
@@ -0,0 +1,296 @@
+/*
+ * Device tree sources for Exynos5433 thermal zone
+ *
+ * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+thermal-zones {
+	atlas0_thermal: atlas0-thermal {
+		thermal-sensors = <&tmu_atlas0>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			atlas0_alert_0: atlas0-alert-0 {
+				temperature = <65000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_1: atlas0-alert-1 {
+				temperature = <70000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_2: atlas0-alert-2 {
+				temperature = <75000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_3: atlas0-alert-3 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_4: atlas0-alert-4 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_5: atlas0-alert-5 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_6: atlas0-alert-6 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				/* Set maximum frequency as 1800MHz  */
+				trip = <&atlas0_alert_0>;
+				cooling-device = <&cpu4 1 2>;
+			};
+			map1 {
+				/* Set maximum frequency as 1700MHz  */
+				trip = <&atlas0_alert_1>;
+				cooling-device = <&cpu4 2 3>;
+			};
+			map2 {
+				/* Set maximum frequency as 1600MHz  */
+				trip = <&atlas0_alert_2>;
+				cooling-device = <&cpu4 3 4>;
+			};
+			map3 {
+				/* Set maximum frequency as 1500MHz  */
+				trip = <&atlas0_alert_3>;
+				cooling-device = <&cpu4 4 5>;
+			};
+			map4 {
+				/* Set maximum frequency as 1400MHz  */
+				trip = <&atlas0_alert_4>;
+				cooling-device = <&cpu4 5 7>;
+			};
+			map5 {
+				/* Set maximum frequencyas 1200MHz  */
+				trip = <&atlas0_alert_5>;
+				cooling-device = <&cpu4 7 9>;
+			};
+			map6 {
+				/* Set maximum frequency as 1000MHz  */
+				trip = <&atlas0_alert_6>;
+				cooling-device = <&cpu4 9 14>;
+			};
+		};
+	};
+
+	atlas1_thermal: atlas1-thermal {
+		thermal-sensors = <&tmu_atlas1>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			atlas1_alert_0: atlas1-alert-0 {
+				temperature = <65000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_1: atlas1-alert-1 {
+				temperature = <70000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_2: atlas1-alert-2 {
+				temperature = <75000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_3: atlas1-alert-3 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_4: atlas1-alert-4 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_5: atlas1-alert-5 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_6: atlas1-alert-6 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+	};
+
+	g3d_thermal: g3d-thermal {
+		thermal-sensors = <&tmu_g3d>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			g3d_alert_0: g3d-alert-0 {
+				temperature = <70000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_1: g3d-alert-1 {
+				temperature = <75000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_2: g3d-alert-2 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_3: g3d-alert-3 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_4: g3d-alert-4 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_5: g3d-alert-5 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_6: g3d-alert-6 {
+				temperature = <100000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+	};
+
+	apollo_thermal: apollo-thermal {
+		thermal-sensors = <&tmu_apollo>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			apollo_alert_0: apollo-alert-0 {
+				temperature = <65000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_1: apollo-alert-1 {
+				temperature = <70000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_2: apollo-alert-2 {
+				temperature = <75000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_3: apollo-alert-3 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_4: apollo-alert-4 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_5: apollo-alert-5 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_6: apollo-alert-6 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				/* Set maximum frequency as 1200MHz  */
+				trip = <&apollo_alert_2>;
+				cooling-device = <&cpu0 1 2>;
+			};
+			map1 {
+				/* Set maximum frequency as 1100MHz  */
+				trip = <&apollo_alert_3>;
+				cooling-device = <&cpu0 2 3>;
+			};
+			map2 {
+				/* Set maximum frequency as 1000MHz  */
+				trip = <&apollo_alert_4>;
+				cooling-device = <&cpu0 3 4>;
+			};
+			map3 {
+				/* Set maximum frequency as 900MHz  */
+				trip = <&apollo_alert_5>;
+				cooling-device = <&cpu0 4 5>;
+			};
+			map4 {
+				/* Set maximum frequency as 800MHz  */
+				trip = <&apollo_alert_6>;
+				cooling-device = <&cpu0 5 9>;
+			};
+		};
+	};
+
+	isp_thermal: isp-thermal {
+		thermal-sensors = <&tmu_isp>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			isp_alert_0: isp-alert-0 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_1: isp-alert-1 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_2: isp-alert-2 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_3: isp-alert-3 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_4: isp-alert-4 {
+				temperature = <100000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_5: isp-alert-5 {
+				temperature = <105000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_6: isp-alert-6 {
+				temperature = <110000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+	};
+};
+};
diff --git a/src/arm64/exynos/exynos5433.dtsi b/src/arm64/exynos/exynos5433.dtsi
new file mode 100644
index 000000000000..135890cd8a85
--- /dev/null
+++ b/src/arm64/exynos/exynos5433.dtsi
@@ -0,0 +1,1462 @@
+/*
+ * Samsung's Exynos5433 SoC device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Samsung's Exynos5433 SoC device nodes are listed in this file.
+ * Exynos5433 based board files can include this file and provide
+ * values for board specific bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos5433 SoC. As device tree coverage for Exynos5433 increases,
+ * additional nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/exynos5433.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos5433";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x100>;
+			clock-frequency = <1300000000>;
+			clocks = <&cmu_apollo CLK_SCLK_APOLLO>;
+			clock-names = "apolloclk";
+			operating-points-v2 = <&cluster_a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x101>;
+			clock-frequency = <1300000000>;
+			operating-points-v2 = <&cluster_a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x102>;
+			clock-frequency = <1300000000>;
+			operating-points-v2 = <&cluster_a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x103>;
+			clock-frequency = <1300000000>;
+			operating-points-v2 = <&cluster_a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu4: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x0>;
+			clock-frequency = <1900000000>;
+			clocks = <&cmu_atlas CLK_SCLK_ATLAS>;
+			clock-names = "atlasclk";
+			operating-points-v2 = <&cluster_a57_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu5: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x1>;
+			clock-frequency = <1900000000>;
+			operating-points-v2 = <&cluster_a57_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu6: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x2>;
+			clock-frequency = <1900000000>;
+			operating-points-v2 = <&cluster_a57_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu7: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x3>;
+			clock-frequency = <1900000000>;
+			operating-points-v2 = <&cluster_a57_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	cluster_a53_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <900000>;
+		};
+		opp@500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <925000>;
+		};
+		opp@600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <950000>;
+		};
+		opp@700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <975000>;
+		};
+		opp@800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp@900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1050000>;
+		};
+		opp@1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1075000>;
+		};
+		opp@1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1112500>;
+		};
+		opp@1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1112500>;
+		};
+		opp@1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1150000>;
+		};
+	};
+
+	cluster_a57_opp_table: opp_table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <900000>;
+		};
+		opp@600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <900000>;
+		};
+		opp@700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <912500>;
+		};
+		opp@800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <912500>;
+		};
+		opp@900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <937500>;
+		};
+		opp@1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <975000>;
+		};
+		opp@1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1012500>;
+		};
+		opp@1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1037500>;
+		};
+		opp@1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1062500>;
+		};
+		opp@1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1087500>;
+		};
+		opp@1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1125000>;
+		};
+		opp@1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <1137500>;
+		};
+		opp@1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <1175000>;
+		};
+		opp@1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1212500>;
+		};
+		opp@1900000000 {
+			opp-hz = /bits/ 64 <1900000000>;
+			opp-microvolt = <1262500>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_off = <0x84000002>;
+		cpu_on = <0xC4000003>;
+	};
+
+	reboot: syscon-reboot {
+		compatible = "syscon-reboot";
+		regmap = <&pmu_system_controller>;
+		offset = <0x400>; /* SWRESET */
+		mask = <0x1>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x18000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		xxti: xxti {
+			compatible = "fixed-clock";
+			clock-output-names = "oscclk";
+			#clock-cells = <0>;
+		};
+
+		cmu_top: clock-controller@10030000 {
+			compatible = "samsung,exynos5433-cmu-top";
+			reg = <0x10030000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"sclk_mphy_pll",
+				"sclk_mfc_pll",
+				"sclk_bus_pll";
+			clocks = <&xxti>,
+				<&cmu_cpif CLK_SCLK_MPHY_PLL>,
+				<&cmu_mif CLK_SCLK_MFC_PLL>,
+				<&cmu_mif CLK_SCLK_BUS_PLL>;
+		};
+
+		cmu_cpif: clock-controller@10fc0000 {
+			compatible = "samsung,exynos5433-cmu-cpif";
+			reg = <0x10fc0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk";
+			clocks = <&xxti>;
+		};
+
+		cmu_mif: clock-controller@105b0000 {
+			compatible = "samsung,exynos5433-cmu-mif";
+			reg = <0x105b0000 0x2000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"sclk_mphy_pll";
+			clocks = <&xxti>,
+				<&cmu_cpif CLK_SCLK_MPHY_PLL>;
+		};
+
+		cmu_peric: clock-controller@14c80000 {
+			compatible = "samsung,exynos5433-cmu-peric";
+			reg = <0x14c80000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_peris: clock-controller@0x10040000 {
+			compatible = "samsung,exynos5433-cmu-peris";
+			reg = <0x10040000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_fsys: clock-controller@156e0000 {
+			compatible = "samsung,exynos5433-cmu-fsys";
+			reg = <0x156e0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"sclk_ufs_mphy",
+				"aclk_fsys_200",
+				"sclk_pcie_100_fsys",
+				"sclk_ufsunipro_fsys",
+				"sclk_mmc2_fsys",
+				"sclk_mmc1_fsys",
+				"sclk_mmc0_fsys",
+				"sclk_usbhost30_fsys",
+				"sclk_usbdrd30_fsys";
+			clocks = <&xxti>,
+				<&cmu_cpif CLK_SCLK_UFS_MPHY>,
+				<&cmu_top CLK_ACLK_FSYS_200>,
+				<&cmu_top CLK_SCLK_PCIE_100_FSYS>,
+				<&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>,
+				<&cmu_top CLK_SCLK_MMC2_FSYS>,
+				<&cmu_top CLK_SCLK_MMC1_FSYS>,
+				<&cmu_top CLK_SCLK_MMC0_FSYS>,
+				<&cmu_top CLK_SCLK_USBHOST30_FSYS>,
+				<&cmu_top CLK_SCLK_USBDRD30_FSYS>;
+		};
+
+		cmu_g2d: clock-controller@12460000 {
+			compatible = "samsung,exynos5433-cmu-g2d";
+			reg = <0x12460000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"aclk_g2d_266",
+				"aclk_g2d_400";
+			clocks = <&xxti>,
+				<&cmu_top CLK_ACLK_G2D_266>,
+				<&cmu_top CLK_ACLK_G2D_400>;
+		};
+
+		cmu_disp: clock-controller@13b90000 {
+			compatible = "samsung,exynos5433-cmu-disp";
+			reg = <0x13b90000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"sclk_dsim1_disp",
+				"sclk_dsim0_disp",
+				"sclk_dsd_disp",
+				"sclk_decon_tv_eclk_disp",
+				"sclk_decon_vclk_disp",
+				"sclk_decon_eclk_disp",
+				"sclk_decon_tv_vclk_disp",
+				"aclk_disp_333";
+			clocks = <&xxti>,
+				<&cmu_mif CLK_SCLK_DSIM1_DISP>,
+				<&cmu_mif CLK_SCLK_DSIM0_DISP>,
+				<&cmu_mif CLK_SCLK_DSD_DISP>,
+				<&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
+				<&cmu_mif CLK_SCLK_DECON_VCLK_DISP>,
+				<&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
+				<&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>,
+				<&cmu_mif CLK_ACLK_DISP_333>;
+		};
+
+		cmu_aud: clock-controller@114c0000 {
+			compatible = "samsung,exynos5433-cmu-aud";
+			reg = <0x114c0000 0x1000>;
+			#clock-cells = <1>;
+			clock-names = "oscclk", "fout_aud_pll";
+			clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>;
+		};
+
+		cmu_bus0: clock-controller@13600000 {
+			compatible = "samsung,exynos5433-cmu-bus0";
+			reg = <0x13600000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "aclk_bus0_400";
+			clocks = <&cmu_top CLK_ACLK_BUS0_400>;
+		};
+
+		cmu_bus1: clock-controller@14800000 {
+			compatible = "samsung,exynos5433-cmu-bus1";
+			reg = <0x14800000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "aclk_bus1_400";
+			clocks = <&cmu_top CLK_ACLK_BUS1_400>;
+		};
+
+		cmu_bus2: clock-controller@13400000 {
+			compatible = "samsung,exynos5433-cmu-bus2";
+			reg = <0x13400000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "aclk_bus2_400";
+			clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>;
+		};
+
+		cmu_g3d: clock-controller@14aa0000 {
+			compatible = "samsung,exynos5433-cmu-g3d";
+			reg = <0x14aa0000 0x2000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "aclk_g3d_400";
+			clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>;
+		};
+
+		cmu_gscl: clock-controller@13cf0000 {
+			compatible = "samsung,exynos5433-cmu-gscl";
+			reg = <0x13cf0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"aclk_gscl_111",
+				"aclk_gscl_333";
+			clocks = <&xxti>,
+				<&cmu_top CLK_ACLK_GSCL_111>,
+				<&cmu_top CLK_ACLK_GSCL_333>;
+		};
+
+		cmu_apollo: clock-controller@11900000 {
+			compatible = "samsung,exynos5433-cmu-apollo";
+			reg = <0x11900000 0x2000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "sclk_bus_pll_apollo";
+			clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>;
+		};
+
+		cmu_atlas: clock-controller@11800000 {
+			compatible = "samsung,exynos5433-cmu-atlas";
+			reg = <0x11800000 0x2000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "sclk_bus_pll_atlas";
+			clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>;
+		};
+
+		cmu_mscl: clock-controller@105d0000 {
+			compatible = "samsung,exynos5433-cmu-mscl";
+			reg = <0x150d0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"sclk_jpeg_mscl",
+				"aclk_mscl_400";
+			clocks = <&xxti>,
+				<&cmu_top CLK_SCLK_JPEG_MSCL>,
+				<&cmu_top CLK_ACLK_MSCL_400>;
+		};
+
+		cmu_mfc: clock-controller@15280000 {
+			compatible = "samsung,exynos5433-cmu-mfc";
+			reg = <0x15280000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "aclk_mfc_400";
+			clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>;
+		};
+
+		cmu_hevc: clock-controller@14f80000 {
+			compatible = "samsung,exynos5433-cmu-hevc";
+			reg = <0x14f80000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "aclk_hevc_400";
+			clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>;
+		};
+
+		cmu_isp: clock-controller@146d0000 {
+			compatible = "samsung,exynos5433-cmu-isp";
+			reg = <0x146d0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"aclk_isp_dis_400",
+				"aclk_isp_400";
+			clocks = <&xxti>,
+				<&cmu_top CLK_ACLK_ISP_DIS_400>,
+				<&cmu_top CLK_ACLK_ISP_400>;
+		};
+
+		cmu_cam0: clock-controller@120d0000 {
+			compatible = "samsung,exynos5433-cmu-cam0";
+			reg = <0x120d0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"aclk_cam0_333",
+				"aclk_cam0_400",
+				"aclk_cam0_552";
+			clocks = <&xxti>,
+				<&cmu_top CLK_ACLK_CAM0_333>,
+				<&cmu_top CLK_ACLK_CAM0_400>,
+				<&cmu_top CLK_ACLK_CAM0_552>;
+		};
+
+		cmu_cam1: clock-controller@145d0000 {
+			compatible = "samsung,exynos5433-cmu-cam1";
+			reg = <0x145d0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"sclk_isp_uart_cam1",
+				"sclk_isp_spi1_cam1",
+				"sclk_isp_spi0_cam1",
+				"aclk_cam1_333",
+				"aclk_cam1_400",
+				"aclk_cam1_552";
+			clocks = <&xxti>,
+				<&cmu_top CLK_SCLK_ISP_UART_CAM1>,
+				<&cmu_top CLK_SCLK_ISP_SPI1_CAM1>,
+				<&cmu_top CLK_SCLK_ISP_SPI0_CAM1>,
+				<&cmu_top CLK_ACLK_CAM1_333>,
+				<&cmu_top CLK_ACLK_CAM1_400>,
+				<&cmu_top CLK_ACLK_CAM1_552>;
+		};
+
+		tmu_atlas0: tmu@10060000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x10060000 0x200>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
+				<&cmu_peris CLK_SCLK_TMU0>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#include "exynos5433-tmu-sensor-conf.dtsi"
+			status = "disabled";
+		};
+
+		tmu_atlas1: tmu@10068000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x10068000 0x200>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
+				<&cmu_peris CLK_SCLK_TMU0>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#include "exynos5433-tmu-sensor-conf.dtsi"
+			status = "disabled";
+		};
+
+		tmu_g3d: tmu@10070000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x10070000 0x200>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
+				<&cmu_peris CLK_SCLK_TMU1>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#include "exynos5433-tmu-g3d-sensor-conf.dtsi"
+			status = "disabled";
+		};
+
+		tmu_apollo: tmu@10078000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x10078000 0x200>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
+				<&cmu_peris CLK_SCLK_TMU1>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#include "exynos5433-tmu-sensor-conf.dtsi"
+			status = "disabled";
+		};
+
+		tmu_isp: tmu@1007c000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x1007c000 0x200>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
+				<&cmu_peris CLK_SCLK_TMU1>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#include "exynos5433-tmu-sensor-conf.dtsi"
+			status = "disabled";
+		};
+
+		mct@101c0000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x101c0000 0x800>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xxti>, <&cmu_peris CLK_PCLK_MCT>;
+			clock-names = "fin_pll", "mct";
+		};
+
+		pinctrl_alive: pinctrl@10580000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos7-wakeup-eint";
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pinctrl_aud: pinctrl@114b0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x114b0000 0x1000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_cpif: pinctrl@10fe0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x10fe0000 0x1000>;
+			interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_ese: pinctrl@14ca0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x14ca0000 0x1000>;
+			interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_finger: pinctrl@14cb0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x14cb0000 0x1000>;
+			interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys: pinctrl@15690000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x15690000 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_imem: pinctrl@11090000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x11090000 0x1000>;
+			interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_nfc: pinctrl@14cd0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x14cd0000 0x1000>;
+			interrupts = <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_peric: pinctrl@14cc0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x14cc0000 0x1100>;
+			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_touch: pinctrl@14ce0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x14ce0000 0x1100>;
+			interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmu_system_controller: system-controller@105c0000 {
+			compatible = "samsung,exynos5433-pmu", "syscon";
+			reg = <0x105c0000 0x5008>;
+			#clock-cells = <1>;
+			clock-names = "clkout16";
+			clocks = <&xxti>;
+		};
+
+		gic: interrupt-controller@11001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x11001000 0x1000>,
+				<0x11002000 0x2000>,
+				<0x11004000 0x2000>,
+				<0x11006000 0x2000>;
+			interrupts = <GIC_PPI 9 0xf04>;
+		};
+
+		mipi_phy: video-phy@105c0710 {
+			compatible = "samsung,exynos5433-mipi-video-phy";
+			#phy-cells = <1>;
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			samsung,cam0-sysreg = <&syscon_cam0>;
+			samsung,cam1-sysreg = <&syscon_cam1>;
+			samsung,disp-sysreg = <&syscon_disp>;
+		};
+
+		decon: decon@13800000 {
+			compatible = "samsung,exynos5433-decon";
+			reg = <0x13800000 0x2104>;
+			clocks = <&cmu_disp CLK_PCLK_DECON>,
+				<&cmu_disp CLK_ACLK_DECON>,
+				<&cmu_disp CLK_ACLK_SMMU_DECON0X>,
+				<&cmu_disp CLK_ACLK_XIU_DECON0X>,
+				<&cmu_disp CLK_PCLK_SMMU_DECON0X>,
+				<&cmu_disp CLK_SCLK_DECON_VCLK>,
+				<&cmu_disp CLK_SCLK_DECON_ECLK>;
+			clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x",
+				"aclk_xiu_decon0x", "pclk_smmu_decon0x",
+				"sclk_decon_vclk", "sclk_decon_eclk";
+			interrupt-names = "fifo", "vsync", "lcd_sys";
+			interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,disp-sysreg = <&syscon_disp>;
+			status = "disabled";
+			iommus = <&sysmmu_decon0x>, <&sysmmu_decon1x>;
+			iommu-names = "m0", "m1";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					decon_to_mic: endpoint {
+						remote-endpoint =
+							<&mic_to_decon>;
+					};
+				};
+			};
+		};
+
+		dsi: dsi@13900000 {
+			compatible = "samsung,exynos5433-mipi-dsi";
+			reg = <0x13900000 0xC0>;
+			interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&mipi_phy 1>;
+			phy-names = "dsim";
+			clocks = <&cmu_disp CLK_PCLK_DSIM0>,
+				<&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>,
+				<&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>,
+				<&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>,
+				<&cmu_disp CLK_SCLK_DSIM0>;
+			clock-names = "bus_clk",
+					"phyclk_mipidphy0_bitclkdiv8",
+					"phyclk_mipidphy0_rxclkesc0",
+					"sclk_rgb_vclk_to_dsim0",
+					"sclk_mipi";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi_to_mic: endpoint {
+						remote-endpoint = <&mic_to_dsi>;
+					};
+				};
+			};
+		};
+
+		mic: mic@13930000 {
+			compatible = "samsung,exynos5433-mic";
+			reg = <0x13930000 0x48>;
+			clocks = <&cmu_disp CLK_PCLK_MIC0>,
+				<&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
+			clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0";
+			samsung,disp-syscon = <&syscon_disp>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					mic_to_decon: endpoint {
+						remote-endpoint =
+							<&decon_to_mic>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					mic_to_dsi: endpoint {
+						remote-endpoint = <&dsi_to_mic>;
+					};
+				};
+			};
+		};
+
+		syscon_disp: syscon@13b80000 {
+			compatible = "syscon";
+			reg = <0x13b80000 0x1010>;
+		};
+
+		syscon_cam0: syscon@120f0000 {
+			compatible = "syscon";
+			reg = <0x120f0000 0x1020>;
+		};
+
+		syscon_cam1: syscon@145f0000 {
+			compatible = "syscon";
+			reg = <0x145f0000 0x1038>;
+		};
+
+		gsc_0: video-scaler@13C00000 {
+			compatible = "samsung,exynos5433-gsc";
+			reg = <0x13c00000 0x1000>;
+			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk", "aclk_xiu",
+				      "aclk_gsclbend";
+			clocks = <&cmu_gscl CLK_PCLK_GSCL0>,
+				 <&cmu_gscl CLK_ACLK_GSCL0>,
+				 <&cmu_gscl CLK_ACLK_XIU_GSCLX>,
+				 <&cmu_gscl CLK_ACLK_GSCLBEND_333>;
+			iommus = <&sysmmu_gscl0>;
+		};
+
+		gsc_1: video-scaler@13C10000 {
+			compatible = "samsung,exynos5433-gsc";
+			reg = <0x13c10000 0x1000>;
+			interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk", "aclk_xiu",
+				      "aclk_gsclbend";
+			clocks = <&cmu_gscl CLK_PCLK_GSCL1>,
+				 <&cmu_gscl CLK_ACLK_GSCL1>,
+				 <&cmu_gscl CLK_ACLK_XIU_GSCLX>,
+				 <&cmu_gscl CLK_ACLK_GSCLBEND_333>;
+			iommus = <&sysmmu_gscl1>;
+		};
+
+		gsc_2: video-scaler@13C20000 {
+			compatible = "samsung,exynos5433-gsc";
+			reg = <0x13c20000 0x1000>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk", "aclk_xiu",
+				      "aclk_gsclbend";
+			clocks = <&cmu_gscl CLK_PCLK_GSCL2>,
+				 <&cmu_gscl CLK_ACLK_GSCL2>,
+				 <&cmu_gscl CLK_ACLK_XIU_GSCLX>,
+				 <&cmu_gscl CLK_ACLK_GSCLBEND_333>;
+			iommus = <&sysmmu_gscl2>;
+		};
+
+		jpeg: codec@15020000 {
+			compatible = "samsung,exynos5433-jpeg";
+			reg = <0x15020000 0x10000>;
+			interrupts = <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk", "aclk_xiu", "sclk";
+			clocks = <&cmu_mscl CLK_PCLK_JPEG>,
+				 <&cmu_mscl CLK_ACLK_JPEG>,
+				 <&cmu_mscl CLK_ACLK_XIU_MSCLX>,
+				 <&cmu_mscl CLK_SCLK_JPEG>;
+			iommus = <&sysmmu_jpeg>;
+		};
+
+		mfc: codec@152E0000 {
+			compatible = "samsung,exynos5433-mfc";
+			reg = <0x152E0000 0x10000>;
+			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk", "aclk_xiu";
+			clocks = <&cmu_mfc CLK_PCLK_MFC>,
+				 <&cmu_mfc CLK_ACLK_MFC>,
+				 <&cmu_mfc CLK_ACLK_XIU_MFCX>;
+			iommus = <&sysmmu_mfc_0>, <&sysmmu_mfc_1>;
+			iommu-names = "left", "right";
+		};
+
+		sysmmu_decon0x: sysmmu@0x13a00000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13a00000 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk";
+			clocks = <&cmu_disp CLK_PCLK_SMMU_DECON0X>,
+				<&cmu_disp CLK_ACLK_SMMU_DECON0X>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_decon1x: sysmmu@0x13a10000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13a10000 0x1000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk";
+			clocks = <&cmu_disp CLK_PCLK_SMMU_DECON1X>,
+				<&cmu_disp CLK_ACLK_SMMU_DECON1X>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_gscl0: sysmmu@0x13C80000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13C80000 0x1000>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL0>,
+				 <&cmu_gscl CLK_PCLK_SMMU_GSCL0>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_gscl1: sysmmu@0x13C90000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13C90000 0x1000>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL1>,
+				 <&cmu_gscl CLK_PCLK_SMMU_GSCL1>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_gscl2: sysmmu@0x13CA0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13CA0000 0x1000>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL2>,
+				 <&cmu_gscl CLK_PCLK_SMMU_GSCL2>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_jpeg: sysmmu@0x15060000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x15060000 0x1000>;
+			interrupts = <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk";
+			clocks = <&cmu_mscl CLK_PCLK_SMMU_JPEG>,
+				 <&cmu_mscl CLK_ACLK_SMMU_JPEG>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_mfc_0: sysmmu@0x15200000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x15200000 0x1000>;
+			interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk";
+			clocks = <&cmu_mfc CLK_PCLK_SMMU_MFC_0>,
+				 <&cmu_mfc CLK_ACLK_SMMU_MFC_0>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_mfc_1: sysmmu@0x15210000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x15210000 0x1000>;
+			interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk";
+			clocks = <&cmu_mfc CLK_PCLK_SMMU_MFC_1>,
+				 <&cmu_mfc CLK_ACLK_SMMU_MFC_1>;
+			#iommu-cells = <0>;
+		};
+
+		serial_0: serial@14c10000 {
+			compatible = "samsung,exynos5433-uart";
+			reg = <0x14c10000 0x100>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peric CLK_PCLK_UART0>,
+				<&cmu_peric CLK_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_bus>;
+			status = "disabled";
+		};
+
+		serial_1: serial@14c20000 {
+			compatible = "samsung,exynos5433-uart";
+			reg = <0x14c20000 0x100>;
+			interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peric CLK_PCLK_UART1>,
+				<&cmu_peric CLK_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_bus>;
+			status = "disabled";
+		};
+
+		serial_2: serial@14c30000 {
+			compatible = "samsung,exynos5433-uart";
+			reg = <0x14c30000 0x100>;
+			interrupts = <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peric CLK_PCLK_UART2>,
+				<&cmu_peric CLK_SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_bus>;
+			status = "disabled";
+		};
+
+		spi_0: spi@14d20000 {
+			compatible = "samsung,exynos5433-spi";
+			reg = <0x14d20000 0x100>;
+			interrupts = <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 9>, <&pdma0 8>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_peric CLK_PCLK_SPI0>,
+				<&cmu_peric CLK_SCLK_SPI0>,
+				<&cmu_peric CLK_SCLK_IOCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0", "spi_ioclk";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi_1: spi@14d30000 {
+			compatible = "samsung,exynos5433-spi";
+			reg = <0x14d30000 0x100>;
+			interrupts = <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 11>, <&pdma0 10>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_peric CLK_PCLK_SPI1>,
+				<&cmu_peric CLK_SCLK_SPI1>,
+				<&cmu_peric CLK_SCLK_IOCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0", "spi_ioclk";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi_2: spi@14d40000 {
+			compatible = "samsung,exynos5433-spi";
+			reg = <0x14d40000 0x100>;
+			interrupts = <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 13>, <&pdma0 12>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_peric CLK_PCLK_SPI2>,
+				<&cmu_peric CLK_SCLK_SPI2>,
+				<&cmu_peric CLK_SCLK_IOCLK_SPI2>;
+			clock-names = "spi", "spi_busclk0", "spi_ioclk";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi_3: spi@14d50000 {
+			compatible = "samsung,exynos5433-spi";
+			reg = <0x14d50000 0x100>;
+			interrupts = <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 23>, <&pdma0 22>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_peric CLK_PCLK_SPI3>,
+				<&cmu_peric CLK_SCLK_SPI3>,
+				<&cmu_peric CLK_SCLK_IOCLK_SPI3>;
+			clock-names = "spi", "spi_busclk0", "spi_ioclk";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi3_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi_4: spi@14d00000 {
+			compatible = "samsung,exynos5433-spi";
+			reg = <0x14d00000 0x100>;
+			interrupts = <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 25>, <&pdma0 24>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_peric CLK_PCLK_SPI4>,
+				<&cmu_peric CLK_SCLK_SPI4>,
+				<&cmu_peric CLK_SCLK_IOCLK_SPI4>;
+			clock-names = "spi", "spi_busclk0", "spi_ioclk";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi4_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		adc: adc@14d10000 {
+			compatible = "samsung,exynos7-adc";
+			reg = <0x14d10000 0x100>;
+			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "adc";
+			clocks = <&cmu_peric CLK_PCLK_ADCIF>;
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			status = "disabled";
+		};
+
+		pwm: pwm@14dd0000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x14dd0000 0x100>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			clocks = <&cmu_peric CLK_PCLK_PWM>;
+			clock-names = "timers";
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		hsi2c_0: hsi2c@14e40000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e40000 0x1000>;
+			interrupts = <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c0_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C0>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_1: hsi2c@14e50000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e50000 0x1000>;
+			interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c1_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C1>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_2: hsi2c@14e60000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e60000 0x1000>;
+			interrupts = <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c2_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C2>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_3: hsi2c@14e70000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e70000 0x1000>;
+			interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c3_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C3>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_4: hsi2c@14ec0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14ec0000 0x1000>;
+			interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c4_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C4>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_5: hsi2c@14ed0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14ed0000 0x1000>;
+			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c5_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C5>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_6: hsi2c@14ee0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14ee0000 0x1000>;
+			interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c6_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C6>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_7: hsi2c@14ef0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14ef0000 0x1000>;
+			interrupts = <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c7_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C7>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_8: hsi2c@14d90000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14d90000 0x1000>;
+			interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c8_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C8>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_9: hsi2c@14da0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14da0000 0x1000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c9_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C9>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_10: hsi2c@14de0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14de0000 0x1000>;
+			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c10_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C10>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_11: hsi2c@14df0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14df0000 0x1000>;
+			interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c11_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C11>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		usbdrd30: usb@15400000  {
+			compatible = "samsung,exynos5250-dwusb3";
+			clocks = <&cmu_fsys CLK_ACLK_USBDRD30>,
+				<&cmu_fsys CLK_SCLK_USBDRD30>;
+			clock-names = "usbdrd30", "usbdrd30_susp_clk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			dwc3@15400000 {
+				compatible = "snps,dwc3";
+				reg = <0x15400000 0x10000>;
+				interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usbdrd30_phy: phy@15500000 {
+			compatible = "samsung,exynos5433-usbdrd-phy";
+			reg = <0x15500000 0x100>;
+			clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, <&xxti>,
+				<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>,
+				<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK>,
+				<&cmu_fsys CLK_SCLK_USBDRD30>;
+			clock-names = "phy", "ref", "phy_utmi", "phy_pipe",
+					"itp";
+			#phy-cells = <1>;
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			status = "disabled";
+		};
+
+		usbhost30_phy: phy@15580000 {
+			compatible = "samsung,exynos5433-usbdrd-phy";
+			reg = <0x15580000 0x100>;
+			clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, <&xxti>,
+				<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>,
+				<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK>,
+				<&cmu_fsys CLK_SCLK_USBHOST30>;
+			clock-names = "phy", "ref", "phy_utmi", "phy_pipe",
+					"itp";
+			#phy-cells = <1>;
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			status = "disabled";
+		};
+
+		usbhost30: usb@15a00000 {
+			compatible = "samsung,exynos5250-dwusb3";
+			clocks = <&cmu_fsys CLK_ACLK_USBHOST30>,
+				<&cmu_fsys CLK_SCLK_USBHOST30>;
+			clock-names = "usbdrd30", "usbdrd30_susp_clk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			usbdrd_dwc3_0: dwc3@15a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x15a00000 0x10000>;
+				interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		mshc_0: mshc@15540000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x15540000 0x2000>;
+			clocks = <&cmu_fsys CLK_ACLK_MMC0>,
+				<&cmu_fsys CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		mshc_1: mshc@15550000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x15550000 0x2000>;
+			clocks = <&cmu_fsys CLK_ACLK_MMC1>,
+				<&cmu_fsys CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		mshc_2: mshc@15560000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x15560000 0x2000>;
+			clocks = <&cmu_fsys CLK_ACLK_MMC2>,
+				<&cmu_fsys CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		amba {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pdma0: pdma@15610000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x15610000 0x1000>;
+				interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cmu_fsys CLK_PDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			pdma1: pdma@15600000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x15600000 0x1000>;
+				interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cmu_fsys CLK_PDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+		};
+
+		audio-subsystem@11400000 {
+			compatible = "samsung,exynos5433-lpass";
+			reg = <0x11400000 0x100>, <0x11500000 0x08>;
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			adma: adma@11420000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x11420000 0x1000>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cmu_aud CLK_ACLK_DMAC>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			i2s0: i2s0@11440000 {
+				compatible = "samsung,exynos7-i2s";
+				reg = <0x11440000 0x100>;
+				dmas = <&adma 0 &adma 2>;
+				dma-names = "tx", "rx";
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_aud CLK_PCLK_AUD_I2S>,
+					<&cmu_aud CLK_SCLK_AUD_I2S>,
+					<&cmu_aud CLK_SCLK_I2S_BCLK>;
+				clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2s0_bus>;
+				status = "disabled";
+			};
+
+			serial_3: serial@11460000 {
+				compatible = "samsung,exynos5433-uart";
+				reg = <0x11460000 0x100>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cmu_aud CLK_PCLK_AUD_UART>,
+					<&cmu_aud CLK_SCLK_AUD_UART>;
+				clock-names = "uart", "clk_uart_baud0";
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart_aud_bus>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+};
+
+#include "exynos5433-pinctrl.dtsi"
+#include "exynos5433-tmu.dtsi"
diff --git a/src/arm64/exynos/exynos7-espresso.dts b/src/arm64/exynos/exynos7-espresso.dts
index d8767b00862e..c528dd52ba2d 100644
--- a/src/arm64/exynos/exynos7-espresso.dts
+++ b/src/arm64/exynos/exynos7-espresso.dts
@@ -12,6 +12,7 @@
 /dts-v1/;
 #include "exynos7.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
 
 / {
 	model = "Samsung Exynos7 Espresso board based on EXYNOS7";
@@ -43,6 +44,8 @@
 
 &rtc {
 	status = "okay";
+	clocks = <&clock_ccore PCLK_RTC>, <&s2mps15_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
 };
 
 &watchdog {
@@ -249,7 +252,7 @@
 
 			buck2_reg: BUCK2 {
 				regulator-name = "vdd_atlas";
-				regulator-min-microvolt = <1200000>;
+				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
 				regulator-boot-on;
diff --git a/src/arm64/exynos/exynos7-pinctrl.dtsi b/src/arm64/exynos/exynos7-pinctrl.dtsi
index f77ddaf21d04..82321984e1fb 100644
--- a/src/arm64/exynos/exynos7-pinctrl.dtsi
+++ b/src/arm64/exynos/exynos7-pinctrl.dtsi
@@ -20,8 +20,14 @@
 		interrupt-controller;
 		interrupt-parent = <&gic>;
 		#interrupt-cells = <2>;
-		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	gpa1: gpa1 {
@@ -31,8 +37,14 @@
 		interrupt-controller;
 		interrupt-parent = <&gic>;
 		#interrupt-cells = <2>;
-		interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	gpa2: gpa2 {
diff --git a/src/arm64/exynos/exynos7.dtsi b/src/arm64/exynos/exynos7.dtsi
index ca663dfe5189..80aa60e38237 100644
--- a/src/arm64/exynos/exynos7.dtsi
+++ b/src/arm64/exynos/exynos7.dtsi
@@ -10,6 +10,7 @@
  */
 
 #include <dt-bindings/clock/exynos7-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	compatible = "samsung,exynos7";
@@ -34,28 +35,28 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu_atlas0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x0>;
 			enable-method = "psci";
 		};
 
-		cpu@1 {
+		cpu_atlas1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x1>;
 			enable-method = "psci";
 		};
 
-		cpu@2 {
+		cpu_atlas2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x2>;
 			enable-method = "psci";
 		};
 
-		cpu@3 {
+		cpu_atlas3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x3>;
@@ -105,7 +106,7 @@
 			pdma0: pdma@10E10000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x10E10000 0x1000>;
-				interrupts = <0 225 0>;
+				interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock_fsys0 ACLK_PDMA0>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -116,7 +117,7 @@
 			pdma1: pdma@10EB0000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x10EB0000 0x1000>;
-				interrupts = <0 226 0>;
+				interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock_fsys0 ACLK_PDMA1>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -219,7 +220,7 @@
 		serial_0: serial@13630000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x13630000 0x100>;
-			interrupts = <0 440 0>;
+			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric0 PCLK_UART0>,
 				 <&clock_peric0 SCLK_UART0>;
 			clock-names = "uart", "clk_uart_baud0";
@@ -229,7 +230,7 @@
 		serial_1: serial@14c20000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x14c20000 0x100>;
-			interrupts = <0 456 0>;
+			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART1>,
 				 <&clock_peric1 SCLK_UART1>;
 			clock-names = "uart", "clk_uart_baud0";
@@ -239,7 +240,7 @@
 		serial_2: serial@14c30000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x14c30000 0x100>;
-			interrupts = <0 457 0>;
+			interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART2>,
 				 <&clock_peric1 SCLK_UART2>;
 			clock-names = "uart", "clk_uart_baud0";
@@ -249,7 +250,7 @@
 		serial_3: serial@14c40000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x14c40000 0x100>;
-			interrupts = <0 458 0>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART3>,
 				 <&clock_peric1 SCLK_UART3>;
 			clock-names = "uart", "clk_uart_baud0";
@@ -263,62 +264,62 @@
 			wakeup-interrupt-controller {
 				compatible = "samsung,exynos7-wakeup-eint";
 				interrupt-parent = <&gic>;
-				interrupts = <0 16 0>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
 		pinctrl_bus0: pinctrl@13470000 {
 			compatible = "samsung,exynos7-pinctrl";
 			reg = <0x13470000 0x1000>;
-			interrupts = <0 383 0>;
+			interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_nfc: pinctrl@14cd0000 {
 			compatible = "samsung,exynos7-pinctrl";
 			reg = <0x14cd0000 0x1000>;
-			interrupts = <0 473 0>;
+			interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_touch: pinctrl@14ce0000 {
 			compatible = "samsung,exynos7-pinctrl";
 			reg = <0x14ce0000 0x1000>;
-			interrupts = <0 474 0>;
+			interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_ff: pinctrl@14c90000 {
 			compatible = "samsung,exynos7-pinctrl";
 			reg = <0x14c90000 0x1000>;
-			interrupts = <0 475 0>;
+			interrupts = <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_ese: pinctrl@14ca0000 {
 			compatible = "samsung,exynos7-pinctrl";
 			reg = <0x14ca0000 0x1000>;
-			interrupts = <0 476 0>;
+			interrupts = <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_fsys0: pinctrl@10e60000 {
 			compatible = "samsung,exynos7-pinctrl";
 			reg = <0x10e60000 0x1000>;
-			interrupts = <0 221 0>;
+			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_fsys1: pinctrl@15690000 {
 			compatible = "samsung,exynos7-pinctrl";
 			reg = <0x15690000 0x1000>;
-			interrupts = <0 203 0>;
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_bus1: pinctrl@14870000 {
 			compatible = "samsung,exynos7-pinctrl";
 			reg = <0x14870000 0x1000>;
-			interrupts = <0 384 0>;
+			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		hsi2c_0: hsi2c@13640000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x13640000 0x1000>;
-			interrupts = <0 441 0>;
+			interrupts = <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -331,7 +332,7 @@
 		hsi2c_1: hsi2c@13650000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x13650000 0x1000>;
-			interrupts = <0 442 0>;
+			interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -344,7 +345,7 @@
 		hsi2c_2: hsi2c@14e60000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x14e60000 0x1000>;
-			interrupts = <0 459 0>;
+			interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -357,7 +358,7 @@
 		hsi2c_3: hsi2c@14e70000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x14e70000 0x1000>;
-			interrupts = <0 460 0>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -370,7 +371,7 @@
 		hsi2c_4: hsi2c@13660000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x13660000 0x1000>;
-			interrupts = <0 443 0>;
+			interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -383,7 +384,7 @@
 		hsi2c_5: hsi2c@13670000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x13670000 0x1000>;
-			interrupts = <0 444 0>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -396,7 +397,7 @@
 		hsi2c_6: hsi2c@14e00000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x14e00000 0x1000>;
-			interrupts = <0 461 0>;
+			interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -409,7 +410,7 @@
 		hsi2c_7: hsi2c@13e10000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x13e10000 0x1000>;
-			interrupts = <0 462 0>;
+			interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -422,7 +423,7 @@
 		hsi2c_8: hsi2c@14e20000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x14e20000 0x1000>;
-			interrupts = <0 463 0>;
+			interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -435,7 +436,7 @@
 		hsi2c_9: hsi2c@13680000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x13680000 0x1000>;
-			interrupts = <0 445 0>;
+			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -448,7 +449,7 @@
 		hsi2c_10: hsi2c@13690000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x13690000 0x1000>;
-			interrupts = <0 446 0>;
+			interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -461,7 +462,7 @@
 		hsi2c_11: hsi2c@136a0000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x136a0000 0x1000>;
-			interrupts = <0 447 0>;
+			interrupts = <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -471,12 +472,26 @@
 			status = "disabled";
 		};
 
+		arm-pmu {
+			compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3";
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-affinity = <&cpu_atlas0>, <&cpu_atlas1>,
+					     <&cpu_atlas2>, <&cpu_atlas3>;
+		};
+
 		timer {
 			compatible = "arm,armv8-timer";
-			interrupts = <1 13 0xff01>,
-				     <1 14 0xff01>,
-				     <1 11 0xff01>,
-				     <1 10 0xff01>;
+			interrupts = <GIC_PPI 13
+					(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14
+					(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11
+					(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10
+					(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 		};
 
 		pmu_system_controller: system-controller@105c0000 {
@@ -494,7 +509,8 @@
 		rtc: rtc@10590000 {
 			compatible = "samsung,s3c6410-rtc";
 			reg = <0x10590000 0x100>;
-			interrupts = <0 355 0>, <0 356 0>;
+			interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_ccore PCLK_RTC>;
 			clock-names = "rtc";
 			status = "disabled";
@@ -503,7 +519,7 @@
 		watchdog: watchdog@101d0000 {
 			compatible = "samsung,exynos7-wdt";
 			reg = <0x101d0000 0x100>;
-			interrupts = <0 110 0>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peris PCLK_WDT>;
 			clock-names = "watchdog";
 			samsung,syscon-phandle = <&pmu_system_controller>;
@@ -512,7 +528,7 @@
 
 		mmc_0: mmc@15740000 {
 			compatible = "samsung,exynos7-dw-mshc-smu";
-			interrupts = <0 201 0>;
+			interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x15740000 0x2000>;
@@ -525,7 +541,7 @@
 
 		mmc_1: mmc@15750000 {
 			compatible = "samsung,exynos7-dw-mshc";
-			interrupts = <0 202 0>;
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x15750000 0x2000>;
@@ -538,7 +554,7 @@
 
 		mmc_2: mmc@15560000 {
 			compatible = "samsung,exynos7-dw-mshc-smu";
-			interrupts = <0 216 0>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x15560000 0x2000>;
@@ -552,7 +568,7 @@
 		adc: adc@13620000 {
 			compatible = "samsung,exynos7-adc";
 			reg = <0x13620000 0x100>;
-			interrupts = <0 448 0>;
+			interrupts = <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric0 PCLK_ADCIF>;
 			clock-names = "adc";
 			#io-channel-cells = <1>;
@@ -572,7 +588,7 @@
 		tmuctrl_0: tmu@10060000 {
 			compatible = "samsung,exynos7-tmu";
 			reg = <0x10060000 0x200>;
-			interrupts = <0 108 0>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peris PCLK_TMU>,
 				 <&clock_peris SCLK_TMU>;
 			clock-names = "tmu_apbif", "tmu_sclk";
diff --git a/src/arm64/freescale/fsl-ls1043a-qds.dts b/src/arm64/freescale/fsl-ls1043a-qds.dts
index 9d3e9fe1c87c..0989d635b558 100644
--- a/src/arm64/freescale/fsl-ls1043a-qds.dts
+++ b/src/arm64/freescale/fsl-ls1043a-qds.dts
@@ -45,7 +45,7 @@
  */
 
 /dts-v1/;
-/include/ "fsl-ls1043a.dtsi"
+#include "fsl-ls1043a.dtsi"
 
 / {
 	model = "LS1043A QDS Board";
@@ -56,12 +56,14 @@
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
 		gpio3 = &gpio4;
-		serial0 = &lpuart0;
-		serial1 = &lpuart1;
-		serial2 = &lpuart2;
-		serial3 = &lpuart3;
-		serial4 = &lpuart4;
-		serial5 = &lpuart5;
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 };
 
diff --git a/src/arm64/freescale/fsl-ls1043a-rdb.dts b/src/arm64/freescale/fsl-ls1043a-rdb.dts
index f895fc02ab06..c37110bc1506 100644
--- a/src/arm64/freescale/fsl-ls1043a-rdb.dts
+++ b/src/arm64/freescale/fsl-ls1043a-rdb.dts
@@ -45,10 +45,22 @@
  */
 
 /dts-v1/;
-/include/ "fsl-ls1043a.dtsi"
+#include "fsl-ls1043a.dtsi"
 
 / {
 	model = "LS1043A RDB Board";
+
+	aliases {
+		crypto = &crypto;
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 };
 
 &i2c0 {
diff --git a/src/arm64/freescale/fsl-ls1043a.dtsi b/src/arm64/freescale/fsl-ls1043a.dtsi
index de0323b48b1e..ec13a6ecb754 100644
--- a/src/arm64/freescale/fsl-ls1043a.dtsi
+++ b/src/arm64/freescale/fsl-ls1043a.dtsi
@@ -44,6 +44,8 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include <dt-bindings/thermal/thermal.h>
+
 / {
 	compatible = "fsl,ls1043a";
 	interrupt-parent = <&gic>;
@@ -51,7 +53,7 @@
 	#size-cells = <2>;
 
 	cpus {
-		#address-cells = <2>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		/*
@@ -63,29 +65,38 @@
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			reg = <0x0 0x0>;
+			reg = <0x0>;
 			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			reg = <0x0 0x1>;
+			reg = <0x1>;
 			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			reg = <0x0 0x2>;
+			reg = <0x2>;
 			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			reg = <0x0 0x3>;
+			reg = <0x3>;
 			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
 		};
 	};
 
@@ -111,10 +122,11 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0x1>, /* Physical Secure PPI */
-			     <1 14 0x1>, /* Physical Non-Secure PPI */
-			     <1 11 0x1>, /* Virtual PPI */
-			     <1 10 0x1>; /* Hypervisor PPI */
+		interrupts = <1 13 0xf08>, /* Physical Secure PPI */
+			     <1 14 0xf08>, /* Physical Non-Secure PPI */
+			     <1 11 0xf08>, /* Virtual PPI */
+			     <1 10 0xf08>; /* Hypervisor PPI */
+		fsl,erratum-a008585;
 	};
 
 	pmu {
@@ -159,6 +171,49 @@
 			big-endian;
 		};
 
+		crypto: crypto@1700000 {
+			compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
+				     "fsl,sec-v4.0";
+			fsl,sec-era = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x1700000 0x100000>;
+			reg = <0x00 0x1700000 0x0 0x100000>;
+			interrupts = <0 75 0x4>;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x10000 0x10000>;
+				interrupts = <0 71 0x4>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x20000 0x10000>;
+				interrupts = <0 72 0x4>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x30000 0x10000>;
+				interrupts = <0 73 0x4>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x40000 0x10000>;
+				interrupts = <0 74 0x4>;
+			};
+		};
+
 		dcfg: dcfg@1ee0000 {
 			compatible = "fsl,ls1043a-dcfg", "syscon";
 			reg = <0x0 0x1ee0000 0x0 0x10000>;
@@ -196,6 +251,88 @@
 			bus-width = <4>;
 		};
 
+		ddr: memory-controller@1080000 {
+			compatible = "fsl,qoriq-memory-controller";
+			reg = <0x0 0x1080000 0x0 0x1000>;
+			interrupts = <0 144 0x4>;
+			big-endian;
+		};
+
+		tmu: tmu@1f00000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f00000 0x0 0x10000>;
+			interrupts = <0 33 0x4>;
+			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+			fsl,tmu-calibration = <0x00000000 0x00000026
+					       0x00000001 0x0000002d
+					       0x00000002 0x00000032
+					       0x00000003 0x00000039
+					       0x00000004 0x0000003f
+					       0x00000005 0x00000046
+					       0x00000006 0x0000004d
+					       0x00000007 0x00000054
+					       0x00000008 0x0000005a
+					       0x00000009 0x00000061
+					       0x0000000a 0x0000006a
+					       0x0000000b 0x00000071
+
+					       0x00010000 0x00000025
+					       0x00010001 0x0000002c
+					       0x00010002 0x00000035
+					       0x00010003 0x0000003d
+					       0x00010004 0x00000045
+					       0x00010005 0x0000004e
+					       0x00010006 0x00000057
+					       0x00010007 0x00000061
+					       0x00010008 0x0000006b
+					       0x00010009 0x00000076
+
+					       0x00020000 0x00000029
+					       0x00020001 0x00000033
+					       0x00020002 0x0000003d
+					       0x00020003 0x00000049
+					       0x00020004 0x00000056
+					       0x00020005 0x00000061
+					       0x00020006 0x0000006d
+
+					       0x00030000 0x00000021
+					       0x00030001 0x0000002a
+					       0x00030002 0x0000003c
+					       0x00030003 0x0000004e>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		thermal-zones {
+			cpu_thermal: cpu-thermal {
+				polling-delay-passive = <1000>;
+				polling-delay = <5000>;
+
+				thermal-sensors = <&tmu 3>;
+
+				trips {
+					cpu_alert: cpu-alert {
+						temperature = <85000>;
+						hysteresis = <2000>;
+						type = "passive";
+					};
+					cpu_crit: cpu-crit {
+						temperature = <95000>;
+						hysteresis = <2000>;
+						type = "critical";
+					};
+				};
+
+				cooling-maps {
+					map0 {
+						trip = <&cpu_alert>;
+						cooling-device =
+							<&cpu0 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+					};
+				};
+			};
+		};
+
 		dspi0: dspi@2100000 {
 			compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
@@ -422,6 +559,7 @@
 			interrupts = <0 60 0x4>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
 		};
 
 		usb1: usb3@3000000 {
@@ -430,6 +568,7 @@
 			interrupts = <0 61 0x4>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
 		};
 
 		usb2: usb3@3100000 {
@@ -438,13 +577,15 @@
 			interrupts = <0 63 0x4>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
 		};
 
 		sata: sata@3200000 {
-			compatible = "fsl,ls1043a-ahci", "fsl,ls1021a-ahci";
+			compatible = "fsl,ls1043a-ahci";
 			reg = <0x0 0x3200000 0x0 0x10000>;
 			interrupts = <0 69 0x4>;
 			clocks = <&clockgen 4 0>;
+			dma-coherent;
 		};
 
 		msi1: msi-controller1@1571000 {
@@ -479,6 +620,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			dma-coherent;
 			num-lanes = <4>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -503,6 +645,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			dma-coherent;
 			num-lanes = <2>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -527,6 +670,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			dma-coherent;
 			num-lanes = <2>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000   /* downstream I/O */
diff --git a/src/arm64/freescale/fsl-ls1046a-qds.dts b/src/arm64/freescale/fsl-ls1046a-qds.dts
new file mode 100644
index 000000000000..290e5b014414
--- /dev/null
+++ b/src/arm64/freescale/fsl-ls1046a-qds.dts
@@ -0,0 +1,212 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2016, Freescale Semiconductor, Inc.
+ *
+ * Shaohui Xie <Shaohui.Xie@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1046a.dtsi"
+
+/ {
+	model = "LS1046A QDS Board";
+	compatible = "fsl,ls1046a-qds", "fsl,ls1046a";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&dspi {
+	bus-num = <0>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst25wf040b", "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "en25s64", "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	pca9547@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+				/* IRQ10_B */
+				interrupts = <0 150 0x4>;
+			};
+
+			eeprom@56 {
+				compatible = "atmel,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c512";
+				reg = <0x57>;
+			};
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461a";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+		  0x1 0x0 0x0 0x7e800000 0x00010000
+		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
+	status = "okay";
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@1,0 {
+		compatible = "fsl,ifc-nand";
+		reg = <0x1 0x0 0x10000>;
+	};
+
+	fpga: board-control@2,0 {
+		compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis";
+		reg = <0x2 0x0 0x0000100>;
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&qspi {
+	num-cs = <2>;
+	bus-num = <0>;
+	status = "okay";
+
+	qflash0: s25fl128s@0 {
+		compatible = "spansion,m25p80";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
diff --git a/src/arm64/freescale/fsl-ls1046a-rdb.dts b/src/arm64/freescale/fsl-ls1046a-rdb.dts
new file mode 100644
index 000000000000..d1ccc000d05a
--- /dev/null
+++ b/src/arm64/freescale/fsl-ls1046a-rdb.dts
@@ -0,0 +1,150 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2016, Freescale Semiconductor, Inc.
+ *
+ * Mingkai Hu <mingkai.hu@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1046a.dtsi"
+
+/ {
+	model = "LS1046A RDB Board";
+	compatible = "fsl,ls1046a-rdb", "fsl,ls1046a";
+
+	aliases {
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	ina220@40 {
+		compatible = "ti,ina220";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	temp-sensor@4c {
+		compatible = "adi,adt7461";
+		reg = <0x4c>;
+	};
+
+	eeprom@56 {
+		compatible = "atmel,24c512";
+		reg = <0x52>;
+	};
+
+	eeprom@57 {
+		compatible = "atmel,24c512";
+		reg = <0x53>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NAND Flashe and CPLD on board */
+	ranges = <0x0 0x0 0x0 0x7e800000 0x00010000
+		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
+	status = "okay";
+
+	nand@0,0 {
+		compatible = "fsl,ifc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x0 0x10000>;
+	};
+
+	cpld: board-control@2,0 {
+		compatible = "fsl,ls1046ardb-cpld";
+		reg = <0x2 0x0 0x0000100>;
+	};
+};
+
+&qspi {
+	num-cs = <2>;
+	bus-num = <0>;
+	status = "okay";
+
+	qflash0: s25fs512s@0 {
+		compatible = "spansion,m25p80";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+
+	qflash1: s25fs512s@1 {
+		compatible = "spansion,m25p80";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <1>;
+	};
+};
diff --git a/src/arm64/freescale/fsl-ls1046a.dtsi b/src/arm64/freescale/fsl-ls1046a.dtsi
new file mode 100644
index 000000000000..38806ca53829
--- /dev/null
+++ b/src/arm64/freescale/fsl-ls1046a.dtsi
@@ -0,0 +1,515 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2016, Freescale Semiconductor, Inc.
+ *
+ * Mingkai Hu <mingkai.hu@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "fsl,ls1046a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		crypto = &crypto;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x1>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x2>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x3>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+		};
+	};
+
+	idle-states {
+		/*
+		 * PSCI node is not added default, U-boot will add missing
+		 * parts if it determines to use PSCI.
+		 */
+		entry-method = "arm,psci";
+
+		CPU_PH20: cpu-ph20 {
+			compatible = "arm,idle-state";
+			idle-state-name = "PH20";
+			arm,psci-suspend-param = <0x00010000>;
+			entry-latency-us = <1000>;
+			exit-latency-us = <1000>;
+			min-residency-us = <3000>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	reboot {
+		compatible ="syscon-reboot";
+		regmap = <&dcfg>;
+		offset = <0xb0>;
+		mask = <0x02>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xf) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xf) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xf) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xf) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	gic: interrupt-controller@1400000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x1410000 0 0x10000>, /* GICD */
+		      <0x0 0x1420000 0 0x20000>, /* GICC */
+		      <0x0 0x1440000 0 0x20000>, /* GICH */
+		      <0x0 0x1460000 0 0x20000>; /* GICV */
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
+					 IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ddr: memory-controller@1080000 {
+			compatible = "fsl,qoriq-memory-controller";
+			reg = <0x0 0x1080000 0x0 0x1000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
+
+		ifc: ifc@1530000 {
+			compatible = "fsl,ifc", "simple-bus";
+			reg = <0x0 0x1530000 0x0 0x10000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		qspi: quadspi@1550000 {
+			compatible = "fsl,ls1021a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x1550000 0x0 0x10000>,
+				<0x0 0x40000000 0x0 0x10000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "qspi_en", "qspi";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+			big-endian;
+			fsl,qspi-has-second-chip;
+			status = "disabled";
+		};
+
+		esdhc: esdhc@1560000 {
+			compatible = "fsl,esdhc";
+			reg = <0x0 0x1560000 0x0 0x10000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			bus-width = <4>;
+		};
+
+		scfg: scfg@1570000 {
+			compatible = "fsl,ls1046a-scfg", "syscon";
+			reg = <0x0 0x1570000 0x0 0x10000>;
+			big-endian;
+		};
+
+		crypto: crypto@1700000 {
+			compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
+				     "fsl,sec-v4.0";
+			fsl,sec-era = <8>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x1700000 0x100000>;
+			reg = <0x00 0x1700000 0x0 0x100000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x10000 0x10000>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x30000 0x10000>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x40000 0x10000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		dcfg: dcfg@1ee0000 {
+			compatible = "fsl,ls1046a-dcfg", "syscon";
+			reg = <0x0 0x1ee0000 0x0 0x10000>;
+			big-endian;
+		};
+
+		clockgen: clocking@1ee1000 {
+			compatible = "fsl,ls1046a-clockgen";
+			reg = <0x0 0x1ee1000 0x0 0x1000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		dspi: dspi@2100000 {
+			compatible = "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 1>;
+			spi-num-chipselects = <5>;
+			big-endian;
+			status = "disabled";
+		};
+
+		i2c0: i2c@2180000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			dmas = <&edma0 1 39>,
+			       <&edma0 1 38>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c1: i2c@2190000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@21a0000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21a0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@21b0000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21b0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		duart0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0500 0x0 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+		};
+
+		duart1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0600 0x0 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+		};
+
+		duart2: serial@21d0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0500 0x0 0x100>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+		};
+
+		duart3: serial@21d0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0600 0x0 0x100>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2320000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2330000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		lpuart0: serial@2950000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2950000 0x0 0x1000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 0>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart1: serial@2960000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2960000 0x0 0x1000>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart2: serial@2970000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2970000 0x0 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart3: serial@2980000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2980000 0x0 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart4: serial@2990000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2990000 0x0 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart5: serial@29a0000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x29a0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		wdog0: watchdog@2ad0000 {
+			compatible = "fsl,imx21-wdt";
+			reg = <0x0 0x2ad0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			big-endian;
+		};
+
+		edma0: edma@2c00000 {
+			#dma-cells = <2>;
+			compatible = "fsl,vf610-edma";
+			reg = <0x0 0x2c00000 0x0 0x10000>,
+			      <0x0 0x2c10000 0x0 0x10000>,
+			      <0x0 0x2c20000 0x0 0x10000>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma-tx", "edma-err";
+			dma-channels = <32>;
+			big-endian;
+			clock-names = "dmamux0", "dmamux1";
+			clocks = <&clockgen 4 1>,
+				 <&clockgen 4 1>;
+		};
+
+		usb0: usb@2f00000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x2f00000 0x0 0x10000>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+		};
+
+		usb1: usb@3000000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3000000 0x0 0x10000>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+		};
+
+		usb2: usb@3100000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+		};
+
+		sata: sata@3200000 {
+			compatible = "fsl,ls1046a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+		};
+	};
+};
diff --git a/src/arm64/freescale/fsl-ls2080a-qds.dts b/src/arm64/freescale/fsl-ls2080a-qds.dts
index e8801faca996..8bc1f8f6fcfc 100644
--- a/src/arm64/freescale/fsl-ls2080a-qds.dts
+++ b/src/arm64/freescale/fsl-ls2080a-qds.dts
@@ -46,7 +46,7 @@
 
 /dts-v1/;
 
-/include/ "fsl-ls2080a.dtsi"
+#include "fsl-ls2080a.dtsi"
 
 / {
 	model = "Freescale Layerscape 2080a QDS Board";
@@ -57,6 +57,9 @@
 		serial1 = &serial1;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 };
 
 &esdhc {
diff --git a/src/arm64/freescale/fsl-ls2080a-rdb.dts b/src/arm64/freescale/fsl-ls2080a-rdb.dts
index e127f0baab19..265e0a8b107b 100644
--- a/src/arm64/freescale/fsl-ls2080a-rdb.dts
+++ b/src/arm64/freescale/fsl-ls2080a-rdb.dts
@@ -46,7 +46,7 @@
 
 /dts-v1/;
 
-/include/ "fsl-ls2080a.dtsi"
+#include "fsl-ls2080a.dtsi"
 
 / {
 	model = "Freescale Layerscape 2080a RDB Board";
@@ -56,6 +56,10 @@
 		serial0 = &serial0;
 		serial1 = &serial1;
 	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
 };
 
 &esdhc {
diff --git a/src/arm64/freescale/fsl-ls2080a-simu.dts b/src/arm64/freescale/fsl-ls2080a-simu.dts
index 505d038078a3..290604b0a603 100644
--- a/src/arm64/freescale/fsl-ls2080a-simu.dts
+++ b/src/arm64/freescale/fsl-ls2080a-simu.dts
@@ -46,7 +46,7 @@
 
 /dts-v1/;
 
-/include/ "fsl-ls2080a.dtsi"
+#include "fsl-ls2080a.dtsi"
 
 / {
 	model = "Freescale Layerscape 2080a software Simulator model";
diff --git a/src/arm64/freescale/fsl-ls2080a.dtsi b/src/arm64/freescale/fsl-ls2080a.dtsi
index 3187c822afa3..e5935f28848c 100644
--- a/src/arm64/freescale/fsl-ls2080a.dtsi
+++ b/src/arm64/freescale/fsl-ls2080a.dtsi
@@ -44,6 +44,8 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include <dt-bindings/thermal/thermal.h>
+
 / {
 	compatible = "fsl,ls2080a";
 	interrupt-parent = <&gic>;
@@ -51,7 +53,7 @@
 	#size-cells = <2>;
 
 	cpus {
-		#address-cells = <2>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		/*
@@ -62,60 +64,88 @@
 		 */
 
 		/* We have 4 clusters having 2 Cortex-A57 cores each */
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57";
-			reg = <0x0 0x0>;
+			reg = <0x0>;
 			clocks = <&clockgen 1 0>;
+			next-level-cache = <&cluster0_l2>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57";
-			reg = <0x0 0x1>;
+			reg = <0x1>;
 			clocks = <&clockgen 1 0>;
+			next-level-cache = <&cluster0_l2>;
 		};
 
-		cpu@100 {
+		cpu2: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57";
-			reg = <0x0 0x100>;
+			reg = <0x100>;
 			clocks = <&clockgen 1 1>;
+			next-level-cache = <&cluster1_l2>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@101 {
+		cpu3: cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57";
-			reg = <0x0 0x101>;
+			reg = <0x101>;
 			clocks = <&clockgen 1 1>;
+			next-level-cache = <&cluster1_l2>;
 		};
 
-		cpu@200 {
+		cpu4: cpu@200 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57";
-			reg = <0x0 0x200>;
+			reg = <0x200>;
 			clocks = <&clockgen 1 2>;
+			next-level-cache = <&cluster2_l2>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@201 {
+		cpu5: cpu@201 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57";
-			reg = <0x0 0x201>;
+			reg = <0x201>;
 			clocks = <&clockgen 1 2>;
+			next-level-cache = <&cluster2_l2>;
 		};
 
-		cpu@300 {
+		cpu6: cpu@300 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57";
-			reg = <0x0 0x300>;
+			reg = <0x300>;
 			clocks = <&clockgen 1 3>;
+			next-level-cache = <&cluster3_l2>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@301 {
+		cpu7: cpu@301 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57";
-			reg = <0x0 0x301>;
+			reg = <0x301>;
 			clocks = <&clockgen 1 3>;
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cluster0_l2: l2-cache0 {
+			compatible = "cache";
+		};
+
+		cluster1_l2: l2-cache1 {
+			compatible = "cache";
+		};
+
+		cluster2_l2: l2-cache2 {
+			compatible = "cache";
+		};
+
+		cluster3_l2: l2-cache3 {
+			compatible = "cache";
 		};
 	};
 
@@ -167,10 +197,11 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
-			     <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
-			     <1 11 0x8>, /* Virtual PPI, active-low */
-			     <1 10 0x8>; /* Hypervisor PPI, active-low */
+		interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
+			     <1 14 4>, /* Physical Non-Secure PPI, active-low */
+			     <1 11 4>, /* Virtual PPI, active-low */
+			     <1 10 4>; /* Hypervisor PPI, active-low */
+		fsl,erratum-a008585;
 	};
 
 	pmu {
@@ -191,6 +222,106 @@
 			clocks = <&sysclk>;
 		};
 
+		dcfg: dcfg@1e00000 {
+			compatible = "fsl,ls2080a-dcfg", "syscon";
+			reg = <0x0 0x1e00000 0x0 0x10000>;
+			little-endian;
+		};
+
+		tmu: tmu@1f80000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f80000 0x0 0x10000>;
+			interrupts = <0 23 0x4>;
+			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+			fsl,tmu-calibration = <0x00000000 0x00000026
+					       0x00000001 0x0000002d
+					       0x00000002 0x00000032
+					       0x00000003 0x00000039
+					       0x00000004 0x0000003f
+					       0x00000005 0x00000046
+					       0x00000006 0x0000004d
+					       0x00000007 0x00000054
+					       0x00000008 0x0000005a
+					       0x00000009 0x00000061
+					       0x0000000a 0x0000006a
+					       0x0000000b 0x00000071
+
+					       0x00010000 0x00000025
+					       0x00010001 0x0000002c
+					       0x00010002 0x00000035
+					       0x00010003 0x0000003d
+					       0x00010004 0x00000045
+					       0x00010005 0x0000004e
+					       0x00010006 0x00000057
+					       0x00010007 0x00000061
+					       0x00010008 0x0000006b
+					       0x00010009 0x00000076
+
+					       0x00020000 0x00000029
+					       0x00020001 0x00000033
+					       0x00020002 0x0000003d
+					       0x00020003 0x00000049
+					       0x00020004 0x00000056
+					       0x00020005 0x00000061
+					       0x00020006 0x0000006d
+
+					       0x00030000 0x00000021
+					       0x00030001 0x0000002a
+					       0x00030002 0x0000003c
+					       0x00030003 0x0000004e>;
+			little-endian;
+			#thermal-sensor-cells = <1>;
+		};
+
+		thermal-zones {
+			cpu_thermal: cpu-thermal {
+				polling-delay-passive = <1000>;
+				polling-delay = <5000>;
+
+				thermal-sensors = <&tmu 4>;
+
+				trips {
+					cpu_alert: cpu-alert {
+						temperature = <75000>;
+						hysteresis = <2000>;
+						type = "passive";
+					};
+					cpu_crit: cpu-crit {
+						temperature = <85000>;
+						hysteresis = <2000>;
+						type = "critical";
+					};
+				};
+
+				cooling-maps {
+					map0 {
+						trip = <&cpu_alert>;
+						cooling-device =
+							<&cpu0 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+					};
+					map1 {
+						trip = <&cpu_alert>;
+						cooling-device =
+							<&cpu2 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+					};
+					map2 {
+						trip = <&cpu_alert>;
+						cooling-device =
+							<&cpu4 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+					};
+					map3 {
+						trip = <&cpu_alert>;
+						cooling-device =
+							<&cpu6 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+					};
+				};
+			};
+		};
+
 		serial0: serial@21c0500 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x0 0x21c0500 0x0 0x100>;
@@ -564,6 +695,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			dma-coherent;
 			num-lanes = <4>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -588,6 +720,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			dma-coherent;
 			num-lanes = <4>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -612,6 +745,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			dma-coherent;
 			num-lanes = <8>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -636,6 +770,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			dma-coherent;
 			num-lanes = <4>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -655,6 +790,7 @@
 			reg = <0x0 0x3200000 0x0 0x10000>;
 			interrupts = <0 133 0x4>; /* Level high type */
 			clocks = <&clockgen 4 3>;
+			dma-coherent;
 		};
 
 		sata1: sata@3210000 {
@@ -663,6 +799,7 @@
 			reg = <0x0 0x3210000 0x0 0x10000>;
 			interrupts = <0 136 0x4>; /* Level high type */
 			clocks = <&clockgen 4 3>;
+			dma-coherent;
 		};
 
 		usb0: usb3@3100000 {
@@ -672,6 +809,7 @@
 			interrupts = <0 80 0x4>; /* Level high type */
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
 		};
 
 		usb1: usb3@3110000 {
@@ -681,6 +819,7 @@
 			interrupts = <0 81 0x4>; /* Level high type */
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
 		};
 
 		ccn@4000000 {
@@ -689,4 +828,18 @@
 			interrupts = <0 12 4>;
 		};
 	};
+
+	ddr1: memory-controller@1080000 {
+		compatible = "fsl,qoriq-memory-controller";
+		reg = <0x0 0x1080000 0x0 0x1000>;
+		interrupts = <0 17 0x4>;
+		little-endian;
+	};
+
+	ddr2: memory-controller@1090000 {
+		compatible = "fsl,qoriq-memory-controller";
+		reg = <0x0 0x1090000 0x0 0x1000>;
+		interrupts = <0 18 0x4>;
+		little-endian;
+	};
 };
diff --git a/src/arm64/hisilicon/hi6220-hikey.dts b/src/arm64/hisilicon/hi6220-hikey.dts
index e92a30c87a82..dba3c131c62c 100644
--- a/src/arm64/hisilicon/hi6220-hikey.dts
+++ b/src/arm64/hisilicon/hi6220-hikey.dts
@@ -29,16 +29,56 @@
 	 * Reserve below regions from memory node:
 	 *
 	 *  0x05e0,0000 - 0x05ef,ffff: MCU firmware runtime using
+	 *  0x05f0,1000 - 0x05f0,1fff: Reboot reason
 	 *  0x06df,f000 - 0x06df,ffff: Mailbox message data
 	 *  0x0740,f000 - 0x0740,ffff: MCU firmware section
+	 *  0x21f0,0000 - 0x21ff,ffff: pstore/ramoops buffer
 	 *  0x3e00,0000 - 0x3fff,ffff: OP-TEE
 	 */
 	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x00000000 0x00000000 0x05e00000>,
-		      <0x00000000 0x05f00000 0x00000000 0x00eff000>,
+		      <0x00000000 0x05f00000 0x00000000 0x00001000>,
+		      <0x00000000 0x05f02000 0x00000000 0x00efd000>,
 		      <0x00000000 0x06e00000 0x00000000 0x0060f000>,
-		      <0x00000000 0x07410000 0x00000000 0x36bf0000>;
+		      <0x00000000 0x07410000 0x00000000 0x1aaf0000>,
+		      <0x00000000 0x22000000 0x00000000 0x1c000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@0x21f00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x21f00000 0x0 0x00100000>;
+			record-size	= <0x00020000>;
+			console-size	= <0x00020000>;
+			ftrace-size	= <0x00020000>;
+		};
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x00000000 0x08000000>;
+			linux,cma-default;
+		};
+	};
+
+	reboot-mode-syscon@5f01000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x05f01000 0x0 0x00001000>;
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x0>;
+
+			mode-normal	= <0x77665501>;
+			mode-bootloader	= <0x77665500>;
+			mode-recovery	= <0x77665502>;
+		};
 	};
 
 	soc {
@@ -55,6 +95,8 @@
 		};
 
 		uart1: uart@f7111000 {
+			assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>;
+			assigned-clock-rates = <150000000>;
 			status = "ok";
 		};
 
@@ -66,6 +108,149 @@
 			status = "ok";
 		};
 
+		/*
+		 * Legend: proper name = the GPIO line is used as GPIO
+		 *         NC = not connected (not routed from the SoC)
+		 *         "[PER]" = pin is muxed for peripheral (not GPIO)
+		 *         "" = no idea, schematic doesn't say, could be
+		 *              unrouted (not connected to any external pin)
+		 *         LSEC = Low Speed External Connector
+		 *         HSEC = High Speed External Connector
+		 *
+		 * Pin assignments taken from LeMaker and CircuitCo Schematics
+		 * Rev A1.
+		 *
+		 * For the lines routed to the external connectors the
+		 * lines are named after the 96Boards CE Specification 1.0,
+		 * Appendix "Expansion Connector Signal Description".
+		 *
+		 * When the 96Board naming of a line and the schematic name of
+		 * the same line are in conflict, the 96Board specification
+		 * takes precedence, which means that the external UART on the
+		 * LSEC is named UART0 while the schematic and SoC names this
+		 * UART2. This is only for the informational lines i.e. "[FOO]",
+		 * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+		 * ones actually used for GPIO.
+		 */
+		gpio0: gpio@f8011000 {
+			gpio-line-names = "PWR_HOLD", "DSI_SEL",
+			"USB_HUB_RESET_N", "USB_SEL", "HDMI_PD", "WL_REG_ON",
+			"PWRON_DET", "5V_HUB_EN";
+		};
+
+		gpio1: gpio@f8012000 {
+			gpio-line-names = "SD_DET", "HDMI_INT", "PMU_IRQ_N",
+			"WL_HOST_WAKE", "NC", "NC", "NC", "BT_REG_ON";
+		};
+
+		gpio2: gpio@f8013000 {
+			gpio-line-names =
+				"GPIO-A", /* LSEC Pin 23: GPIO2_0 */
+				"GPIO-B", /* LSEC Pin 24: GPIO2_1 */
+				"GPIO-C", /* LSEC Pin 25: GPIO2_2 */
+				"GPIO-D", /* LSEC Pin 26: GPIO2_3 */
+				"GPIO-E", /* LSEC Pin 27: GPIO2_4 */
+				"USB_ID_DET", "USB_VBUS_DET",
+				"GPIO-H"; /* LSEC Pin 30: GPIO2_7 */
+		};
+
+		gpio3: gpio@f8014000 {
+			gpio-line-names = "GPIO3_0", "NC", "NC", "", "NC", "",
+			"WLAN_ACTIVE", "NC", "NC";
+		};
+
+		gpio4: gpio@f7020000 {
+			gpio-line-names = "USER_LED1", "USER_LED2", "USER_LED3",
+			"USER_LED4", "SD_SEL", "NC", "NC", "BT_ACTIVE";
+		};
+
+		gpio5: gpio@f7021000 {
+			gpio-line-names = "NC", "NC",
+			"[UART1_RxD]", /* LSEC Pin 11: UART3_RX */
+			"[UART1_TxD]", /* LSEC Pin 13: UART3_TX */
+			"[AUX_SSI1]", "NC",
+			"[PCM_CLK]", /* LSEC Pin 18: MODEM_PCM_XCLK */
+			"[PCM_FS]"; /* LSEC Pin 16: MODEM_PCM_XFS */
+		};
+
+		gpio6: gpio@f7022000 {
+			gpio-line-names =
+			"[SPI0_DIN]", /* Pin 10: SPI0_DI */
+			"[SPI0_DOUT]", /* Pin 14: SPI0_DO */
+			"[SPI0_CS]", /* Pin 12: SPI0_CS_N */
+			"[SPI0_SCLK]", /* Pin 8: SPI0_SCLK */
+			"NC", "NC", "NC",
+			"GPIO-G"; /* Pin 29: GPIO6_7_DSI_TE0 */
+		};
+
+		gpio7: gpio@f7023000 {
+			gpio-line-names = "NC", "NC", "NC", "NC",
+			"[PCM_DI]", /* Pin 22: MODEM_PCM_DI */
+			"[PCM_DO]", /* Pin 20: MODEM_PCM_DO */
+			"NC", "NC";
+		};
+
+		gpio8: gpio@f7024000 {
+			gpio-line-names = "NC", "[CEC_CLK_19_2MHZ]", "NC",
+			"", "", "", "", "", "";
+		};
+
+		gpio9: gpio@f7025000 {
+			gpio-line-names = "",
+			"GPIO-J", /* LSEC Pin 32: ISP_PWDN0_GPIO9_1 */
+			"GPIO-L", /* LSEC Pin 34: ISP_PWDN1_GPIO9_2 */
+			"NC", "NC", "NC", "NC", "[ISP_CCLK0]";
+		};
+
+		gpio10: gpio@f7026000 {
+			gpio-line-names = "BOOT_SEL",
+			"[ISP_CCLK1]",
+			"GPIO-I", /* LSEC Pin 31: ISP_RSTB0_GPIO10_2 */
+			"GPIO-K", /* LSEC Pin 33: ISP_RSTB1_GPIO10_3 */
+			"NC", "NC",
+			"[I2C2_SDA]", /* HSEC Pin 34: ISP0_SDA */
+			"[I2C2_SCL]"; /* HSEC Pin 32: ISP0_SCL */
+		};
+
+		gpio11: gpio@f7027000 {
+			gpio-line-names =
+			"[I2C3_SDA]", /* HSEC Pin 38: ISP1_SDA */
+			"[I2C3_SCL]", /* HSEC Pin 36: ISP1_SCL */
+			"", "NC", "NC", "NC", "", "";
+		};
+
+		gpio12: gpio@f7028000 {
+			gpio-line-names = "[BT_PCM_XFS]", "[BT_PCM_DI]",
+			"[BT_PCM_DO]",
+			"NC", "NC", "NC", "NC",
+			"GPIO-F"; /* LSEC Pin 28: BL_PWM_GPIO12_7 */
+		};
+
+		gpio13: gpio@f7029000 {
+			gpio-line-names = "[UART0_RX]", "[UART0_TX]",
+			"[BT_UART1_CTS]", "[BT_UART1_RTS]",
+			"[BT_UART1_RX]", "[BT_UART1_TX]",
+			"[UART0_CTS]", /* LSEC Pin 3: UART2_CTS_N */
+			"[UART0_RTS]"; /* LSEC Pin 9: UART2_RTS_N */
+		};
+
+		gpio14: gpio@f702a000 {
+			gpio-line-names =
+			"[UART0_RxD]", /* LSEC Pin 7: UART2_RX */
+			"[UART0_TxD]", /* LSEC Pin 5: UART2_TX */
+			"[I2C0_SCL]", /* LSEC Pin 15: I2C0_SCL */
+			"[I2C0_SDA]", /* LSEC Pin 17: I2C0_SDA */
+			"[I2C1_SCL]", /* LSEC Pin 19: I2C1_SCL */
+			"[I2C1_SDA]", /* LSEC Pin 21: I2C1_SDA */
+			"[I2C2_SCL]", "[I2C2_SDA]";
+		};
+
+		gpio15: gpio@f702b000 {
+			gpio-line-names = "", "", "", "", "", "", "NC", "";
+		};
+
+		/* GPIO blocks 16 thru 19 do not appear to be routed to pins */
+
 		dwmmc_2: dwmmc2@f723f000 {
 			ti,non-removable;
 			non-removable;
@@ -229,3 +414,43 @@
 &uart3 {
 	label = "LS-UART1";
 };
+
+&ade {
+	status = "ok";
+};
+
+&dsi {
+	status = "ok";
+
+	ports {
+		/* 1 for output port */
+		port@1 {
+			reg = <1>;
+
+			dsi_out0: endpoint@0 {
+				remote-endpoint = <&adv7533_in>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "ok";
+
+	adv7533: adv7533@39 {
+		compatible = "adi,adv7533";
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 2>;
+		pd-gpio = <&gpio0 4 0>;
+		adi,dsi-lanes = <4>;
+
+		port {
+			adv7533_in: endpoint {
+				remote-endpoint = <&dsi_out0>;
+			};
+		};
+	};
+};
diff --git a/src/arm64/hisilicon/hi6220.dtsi b/src/arm64/hisilicon/hi6220.dtsi
index 189d21541f9c..470461ddd427 100644
--- a/src/arm64/hisilicon/hi6220.dtsi
+++ b/src/arm64/hisilicon/hi6220.dtsi
@@ -5,6 +5,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/hisi,hi6220-resets.h>
 #include <dt-bindings/clock/hi6220-clock.h>
 #include <dt-bindings/pinctrl/hisi.h>
 #include <dt-bindings/thermal/thermal.h>
@@ -252,6 +253,7 @@
 			compatible = "hisilicon,hi6220-mediactrl", "syscon";
 			reg = <0x0 0xf4410000 0x0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		pm_ctrl: pm_ctrl@f7032000 {
@@ -260,6 +262,11 @@
 			#clock-cells = <1>;
 		};
 
+		medianoc_ade: medianoc_ade@f4520000 {
+			compatible = "syscon";
+			reg = <0x0 0xf4520000 0x0 0x4000>;
+		};
+
 		stub_clock: stub_clock {
 			compatible = "hisilicon,hi6220-stub-clk";
 			hisilicon,hi6220-clk-sram = <&sram>;
@@ -336,11 +343,28 @@
 			clock-names = "timer1", "timer2", "apb_pclk";
 		};
 
+		rtc0: rtc@f8003000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x0 0xf8003000 0x0 0x1000>;
+			interrupts = <0 12 4>;
+			clocks = <&ao_ctrl HI6220_RTC0_PCLK>;
+			clock-names = "apb_pclk";
+		};
+
+		rtc1: rtc@f8004000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x0 0xf8004000 0x0 0x1000>;
+			interrupts = <0 8 4>;
+			clocks = <&ao_ctrl HI6220_RTC1_PCLK>;
+			clock-names = "apb_pclk";
+		};
+
 		pmx0: pinmux@f7010000 {
 			compatible = "pinctrl-single";
 			reg = <0x0 0xf7010000  0x0 0x27c>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			#pinctrl-cells = <1>;
 			#gpio-range-cells = <3>;
 			pinctrl-single,register-width = <32>;
 			pinctrl-single,function-mask = <7>;
@@ -379,6 +403,7 @@
 			reg = <0x0 0xf7010800 0x0 0x28c>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			#pinctrl-cells = <1>;
 			pinctrl-single,register-width = <32>;
 		};
 
@@ -387,6 +412,7 @@
 			reg = <0x0 0xf8001800 0x0 0x78>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			#pinctrl-cells = <1>;
 			pinctrl-single,register-width = <32>;
 		};
 
@@ -724,7 +750,6 @@
 			clocks = <&sys_ctrl HI6220_USBOTG_HCLK>;
 			clock-names = "otg";
 			dr_mode = "otg";
-			g-use-dma;
 			g-rx-fifo-size = <512>;
 			g-np-tx-fifo-size = <128>;
 			g-tx-fifo-size = <128 128 128 128 128 128>;
@@ -748,6 +773,7 @@
 			interrupts = <0x0 0x48 0x4>;
 			clocks = <&sys_ctrl 2>, <&sys_ctrl 1>;
 			clock-names = "ciu", "biu";
+			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC0>;
 			bus-width = <0x8>;
 			vmmc-supply = <&ldo19>;
 			pinctrl-names = "default";
@@ -761,12 +787,16 @@
 			card-detect-delay = <200>;
 			hisilicon,peripheral-syscon = <&ao_ctrl>;
 			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
 			reg = <0x0 0xf723e000 0x0 0x1000>;
 			interrupts = <0x0 0x49 0x4>;
 			#address-cells = <0x1>;
 			#size-cells = <0x0>;
 			clocks = <&sys_ctrl 4>, <&sys_ctrl 3>;
 			clock-names = "ciu", "biu";
+			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC1>;
 			vqmmc-supply = <&ldo7>;
 			vmmc-supply = <&ldo10>;
 			bus-width = <0x4>;
@@ -784,6 +814,7 @@
 			interrupts = <0x0 0x4a 0x4>;
 			clocks = <&sys_ctrl HI6220_MMC2_CIUCLK>, <&sys_ctrl HI6220_MMC2_CLK>;
 			clock-names = "ciu", "biu";
+			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC2>;
 			bus-width = <0x4>;
 			broken-cd;
 			pinctrl-names = "default", "idle";
@@ -832,5 +863,55 @@
 				};
 			};
 		};
+
+		ade: ade@f4100000 {
+			compatible = "hisilicon,hi6220-ade";
+			reg = <0x0 0xf4100000 0x0 0x7800>;
+			reg-names = "ade_base";
+			hisilicon,noc-syscon = <&medianoc_ade>;
+			resets = <&media_ctrl MEDIA_ADE>;
+			interrupts = <0 115 4>; /* ldi interrupt */
+
+			clocks = <&media_ctrl HI6220_ADE_CORE>,
+				 <&media_ctrl HI6220_CODEC_JPEG>,
+				 <&media_ctrl HI6220_ADE_PIX_SRC>;
+			/*clock name*/
+			clock-names  = "clk_ade_core",
+				       "clk_codec_jpeg",
+				       "clk_ade_pix";
+
+			assigned-clocks = <&media_ctrl HI6220_ADE_CORE>,
+				<&media_ctrl HI6220_CODEC_JPEG>;
+			assigned-clock-rates = <360000000>, <288000000>;
+			dma-coherent;
+			status = "disabled";
+
+			port {
+				ade_out: endpoint {
+					remote-endpoint = <&dsi_in>;
+				};
+			};
+		};
+
+		dsi: dsi@f4107800 {
+			compatible = "hisilicon,hi6220-dsi";
+			reg = <0x0 0xf4107800 0x0 0x100>;
+			clocks = <&media_ctrl  HI6220_DSI_PCLK>;
+			clock-names = "pclk";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* 0 for input port */
+				port@0 {
+					reg = <0>;
+					dsi_in: endpoint {
+						remote-endpoint = <&ade_out>;
+					};
+				};
+			};
+		};
 	};
 };
diff --git a/src/arm64/hisilicon/hip05.dtsi b/src/arm64/hisilicon/hip05.dtsi
index bf322ed038b8..4b472a302cd8 100644
--- a/src/arm64/hisilicon/hip05.dtsi
+++ b/src/arm64/hisilicon/hip05.dtsi
@@ -300,11 +300,6 @@
 			clock-frequency = <200000000>;
 		};
 
-		peri_c_subctrl: syscon@80000000 {
-			compatible = "hisilicon,hip05-perisubc", "syscon";
-			reg = < 0x0 0x80000000 0x0 0x10000>;
-		};
-
 		uart0: uart@80300000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x80300000 0x0 0x10000>;
diff --git a/src/arm64/hisilicon/hip06-d03.dts b/src/arm64/hisilicon/hip06-d03.dts
index f3e5323e430b..7c4114a67753 100644
--- a/src/arm64/hisilicon/hip06-d03.dts
+++ b/src/arm64/hisilicon/hip06-d03.dts
@@ -25,6 +25,26 @@
 	chosen { };
 };
 
+&eth0 {
+	status = "ok";
+};
+
+&eth1 {
+	status = "ok";
+};
+
+&eth2 {
+	status = "ok";
+};
+
+&eth3 {
+	status = "ok";
+};
+
+&sas1 {
+	status = "ok";
+};
+
 &usb_ohci {
 	status = "ok";
 };
diff --git a/src/arm64/hisilicon/hip06.dtsi b/src/arm64/hisilicon/hip06.dtsi
index 5927bc472f1b..a049b64f2101 100644
--- a/src/arm64/hisilicon/hip06.dtsi
+++ b/src/arm64/hisilicon/hip06.dtsi
@@ -277,6 +277,39 @@
 			#interrupt-cells = <2>;
 			num-pins = <2>;
 		};
+
+		mbigen_sas1: intc_sas1 {
+			msi-parent = <&its_dsa 0x40000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <128>;
+		};
+
+		mbigen_sas2: intc_sas2 {
+			msi-parent = <&its_dsa 0x40040>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <128>;
+		};
+	};
+
+	mbigen_dsa@c0080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x0 0xc0080000 0x0 0x10000>;
+
+		mbigen_dsaf0: intc_dsaf0 {
+			msi-parent = <&its_dsa 0x40800>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <409>;
+		};
+
+		mbigen_sas0: intc-sas0 {
+			msi-parent = <&its_dsa 0x40900>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <128>;
+		};
 	};
 
 	soc {
@@ -285,11 +318,17 @@
 		#size-cells = <2>;
 		ranges;
 
+		refclk: refclk {
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+			#clock-cells = <0>;
+		};
+
 		usb_ohci: ohci@a7030000 {
 			compatible = "generic-ohci";
 			reg = <0x0 0xa7030000 0x0 0x10000>;
 			interrupt-parent = <&mbigen_usb>;
-			interrupts = <64 4>;
+			interrupts = <640 4>;
 			dma-coherent;
 			status = "disabled";
 		};
@@ -298,8 +337,343 @@
 			compatible = "generic-ehci";
 			reg = <0x0 0xa7020000 0x0 0x10000>;
 			interrupt-parent = <&mbigen_usb>;
-			interrupts = <65 4>;
+			interrupts = <641 4>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		peri_c_subctrl: sub_ctrl_c@60000000 {
+			compatible = "hisilicon,peri-subctrl","syscon";
+			reg = <0 0x60000000 0x0 0x10000>;
+		};
+
+		dsa_subctrl: dsa_subctrl@c0000000 {
+			compatible = "hisilicon,dsa-subctrl", "syscon";
+			reg = <0x0 0xc0000000 0x0 0x10000>;
+		};
+
+		pcie_subctl: pcie_subctl@a0000000 {
+			compatible = "hisilicon,pcie-sas-subctrl", "syscon";
+			reg = <0x0 0xa0000000 0x0 0x10000>;
+		};
+
+		serdes_ctrl: sds_ctrl@c2200000 {
+			compatible = "syscon";
+			reg = <0 0xc2200000 0x0 0x80000>;
+		};
+
+		mdio@603c0000 {
+			compatible = "hisilicon,hns-mdio";
+			reg = <0x0 0x603c0000 0x0 0x1000>;
+			subctrl-vbase = <&peri_c_subctrl 0x338 0xa38 0x531c 0x5a1c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy0: ethernet-phy@0 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <0>;
+			};
+
+			phy1: ethernet-phy@1 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <1>;
+			};
+		};
+
+		dsaf0: dsa@c7000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "hisilicon,hns-dsaf-v2";
+			mode = "6port-16rss";
+			reg = <0x0 0xc5000000 0x0 0x890000
+			       0x0 0xc7000000 0x0 0x600000>;
+			reg-names = "ppe-base", "dsaf-base";
+			interrupt-parent = <&mbigen_dsaf0>;
+			subctrl-syscon = <&dsa_subctrl>;
+			reset-field-offset = <0>;
+			interrupts =
+			<576 1>, <577 1>, <578 1>, <579 1>, <580 1>,
+			<581 1>, <582 1>, <583 1>, <584 1>, <585 1>,
+			<586 1>, <587 1>, <588 1>, <589 1>, <590 1>,
+			<591 1>, <592 1>, <593 1>, <594 1>, <595 1>,
+			<596 1>, <597 1>, <598 1>, <599 1>, <600 1>,
+			<960 1>, <961 1>, <962 1>, <963 1>, <964 1>,
+			<965 1>, <966 1>, <967 1>, <968 1>, <969 1>,
+			<970 1>, <971 1>, <972 1>, <973 1>, <974 1>,
+			<975 1>, <976 1>, <977 1>, <978 1>, <979 1>,
+			<980 1>, <981 1>, <982 1>, <983 1>, <984 1>,
+			<985 1>, <986 1>, <987 1>, <988 1>, <989 1>,
+			<990 1>, <991 1>, <992 1>, <993 1>, <994 1>,
+			<995 1>, <996 1>, <997 1>, <998 1>, <999 1>,
+			<1000 1>, <1001 1>, <1002 1>, <1003 1>, <1004 1>,
+			<1005 1>, <1006 1>, <1007 1>, <1008 1>, <1009 1>,
+			<1010 1>, <1011 1>, <1012 1>, <1013 1>, <1014 1>,
+			<1015 1>, <1016 1>, <1017 1>, <1018 1>, <1019 1>,
+			<1020 1>, <1021 1>, <1022 1>, <1023 1>, <1024 1>,
+			<1025 1>, <1026 1>, <1027 1>, <1028 1>, <1029 1>,
+			<1030 1>, <1031 1>, <1032 1>, <1033 1>, <1034 1>,
+			<1035 1>, <1036 1>, <1037 1>, <1038 1>, <1039 1>,
+			<1040 1>, <1041 1>, <1042 1>, <1043 1>, <1044 1>,
+			<1045 1>, <1046 1>, <1047 1>, <1048 1>, <1049 1>,
+			<1050 1>, <1051 1>, <1052 1>, <1053 1>, <1054 1>,
+			<1055 1>, <1056 1>, <1057 1>, <1058 1>, <1059 1>,
+			<1060 1>, <1061 1>, <1062 1>, <1063 1>, <1064 1>,
+			<1065 1>, <1066 1>, <1067 1>, <1068 1>, <1069 1>,
+			<1070 1>, <1071 1>, <1072 1>, <1073 1>, <1074 1>,
+			<1075 1>, <1076 1>, <1077 1>, <1078 1>, <1079 1>,
+			<1080 1>, <1081 1>, <1082 1>, <1083 1>, <1084 1>,
+			<1085 1>, <1086 1>, <1087 1>, <1088 1>, <1089 1>,
+			<1090 1>, <1091 1>, <1092 1>, <1093 1>, <1094 1>,
+			<1095 1>, <1096 1>, <1097 1>, <1098 1>, <1099 1>,
+			<1100 1>, <1101 1>, <1102 1>, <1103 1>, <1104 1>,
+			<1105 1>, <1106 1>, <1107 1>, <1108 1>, <1109 1>,
+			<1110 1>, <1111 1>, <1112 1>, <1113 1>, <1114 1>,
+			<1115 1>, <1116 1>, <1117 1>, <1118 1>, <1119 1>,
+			<1120 1>, <1121 1>, <1122 1>, <1123 1>, <1124 1>,
+			<1125 1>, <1126 1>, <1127 1>, <1128 1>, <1129 1>,
+			<1130 1>, <1131 1>, <1132 1>, <1133 1>, <1134 1>,
+			<1135 1>, <1136 1>, <1137 1>, <1138 1>, <1139 1>,
+			<1140 1>, <1141 1>, <1142 1>, <1143 1>, <1144 1>,
+			<1145 1>, <1146 1>, <1147 1>, <1148 1>, <1149 1>,
+			<1150 1>, <1151 1>, <1152 1>, <1153 1>, <1154 1>,
+			<1155 1>, <1156 1>, <1157 1>, <1158 1>, <1159 1>,
+			<1160 1>, <1161 1>, <1162 1>, <1163 1>, <1164 1>,
+			<1165 1>, <1166 1>, <1167 1>, <1168 1>, <1169 1>,
+			<1170 1>, <1171 1>, <1172 1>, <1173 1>, <1174 1>,
+			<1175 1>, <1176 1>, <1177 1>, <1178 1>, <1179 1>,
+			<1180 1>, <1181 1>, <1182 1>, <1183 1>, <1184 1>,
+			<1185 1>, <1186 1>, <1187 1>, <1188 1>, <1189 1>,
+			<1190 1>, <1191 1>, <1192 1>, <1193 1>, <1194 1>,
+			<1195 1>, <1196 1>, <1197 1>, <1198 1>, <1199 1>,
+			<1200 1>, <1201 1>, <1202 1>, <1203 1>, <1204 1>,
+			<1205 1>, <1206 1>, <1207 1>, <1208 1>, <1209 1>,
+			<1210 1>, <1211 1>, <1212 1>, <1213 1>, <1214 1>,
+			<1215 1>, <1216 1>, <1217 1>, <1218 1>, <1219 1>,
+			<1220 1>, <1221 1>, <1222 1>, <1223 1>, <1224 1>,
+			<1225 1>, <1226 1>, <1227 1>, <1228 1>, <1229 1>,
+			<1230 1>, <1231 1>, <1232 1>, <1233 1>, <1234 1>,
+			<1235 1>, <1236 1>, <1237 1>, <1238 1>, <1239 1>,
+			<1240 1>, <1241 1>, <1242 1>, <1243 1>, <1244 1>,
+			<1245 1>, <1246 1>, <1247 1>, <1248 1>, <1249 1>,
+			<1250 1>, <1251 1>, <1252 1>, <1253 1>, <1254 1>,
+			<1255 1>, <1256 1>, <1257 1>, <1258 1>, <1259 1>,
+			<1260 1>, <1261 1>, <1262 1>, <1263 1>, <1264 1>,
+			<1265 1>, <1266 1>, <1267 1>, <1268 1>, <1269 1>,
+			<1270 1>, <1271 1>, <1272 1>, <1273 1>, <1274 1>,
+			<1275 1>, <1276 1>, <1277 1>, <1278 1>, <1279 1>,
+			<1280 1>, <1281 1>, <1282 1>, <1283 1>, <1284 1>,
+			<1285 1>, <1286 1>, <1287 1>, <1288 1>, <1289 1>,
+			<1290 1>, <1291 1>, <1292 1>, <1293 1>, <1294 1>,
+			<1295 1>, <1296 1>, <1297 1>, <1298 1>, <1299 1>,
+			<1300 1>, <1301 1>, <1302 1>, <1303 1>, <1304 1>,
+			<1305 1>, <1306 1>, <1307 1>, <1308 1>, <1309 1>,
+			<1310 1>, <1311 1>, <1312 1>, <1313 1>, <1314 1>,
+			<1315 1>, <1316 1>, <1317 1>, <1318 1>, <1319 1>,
+			<1320 1>, <1321 1>, <1322 1>, <1323 1>, <1324 1>,
+			<1325 1>, <1326 1>, <1327 1>, <1328 1>, <1329 1>,
+			<1330 1>, <1331 1>, <1332 1>, <1333 1>, <1334 1>,
+			<1335 1>, <1336 1>, <1337 1>, <1338 1>, <1339 1>,
+			<1340 1>, <1341 1>, <1342 1>, <1343 1>;
+
+			desc-num = <0x400>;
+			buf-size = <0x1000>;
+			dma-coherent;
+
+			port@0 {
+				reg = <0>;
+				serdes-syscon = <&serdes_ctrl>;
+				port-rst-offset = <0>;
+				port-mode-offset = <0>;
+				media-type = "fiber";
+			};
+
+			port@1 {
+				reg = <1>;
+				serdes-syscon= <&serdes_ctrl>;
+				port-rst-offset = <1>;
+				port-mode-offset = <1>;
+				media-type = "fiber";
+			};
+
+			port@4 {
+				reg = <4>;
+				phy-handle = <&phy0>;
+				serdes-syscon= <&serdes_ctrl>;
+				port-rst-offset = <4>;
+				port-mode-offset = <2>;
+				media-type = "copper";
+			};
+
+			port@5 {
+				reg = <5>;
+				phy-handle = <&phy1>;
+				serdes-syscon= <&serdes_ctrl>;
+				port-rst-offset = <5>;
+				port-mode-offset = <3>;
+				media-type = "copper";
+			};
+		};
+
+		eth0: ethernet-4{
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <4>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		eth1: ethernet-5{
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <5>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		eth2: ethernet-0{
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <0>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		eth3: ethernet-1{
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <1>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		sas0: sas@c3000000 {
+			compatible = "hisilicon,hip06-sas-v2";
+			reg = <0 0xc3000000 0 0x10000>;
+			sas-addr = [50 01 88 20 16 00 00 00];
+			hisilicon,sas-syscon = <&dsa_subctrl>;
+			ctrl-reset-reg = <0xa60>;
+			ctrl-reset-sts-reg = <0x5a30>;
+			ctrl-clock-ena-reg = <0x338>;
+			clocks = <&refclk 0>;
+			queue-count = <16>;
+			phy-count = <8>;
+			dma-coherent;
+			interrupt-parent = <&mbigen_sas0>;
+			interrupts = <64 4>,<65 4>,<66 4>,<67 4>,<68 4>,
+				     <69 4>,<70 4>,<71 4>,<72 4>,<73 4>,
+				     <75 4>,<76 4>,<77 4>,<78 4>,<79 4>,
+				     <80 4>,<81 4>,<82 4>,<83 4>,<84 4>,
+				     <85 4>,<86 4>,<87 4>,<88 4>,<89 4>,
+				     <90 4>,<91 4>,<92 4>,<93 4>,<94 4>,
+				     <95 4>,<96 4>,<97 4>,<98 4>,<99 4>,
+				     <100 4>,<101 4>,<102 4>,<103 4>,<104 4>,
+				     <105 4>,<106 4>,<107 4>,<108 4>,<109 4>,
+				     <110 4>,<111 4>,<112 4>,<113 4>,<114 4>,
+				     <115 4>,<116 4>,<117 4>,<118 4>,<119 4>,
+				     <120 4>,<121 4>,<122 4>,<123 4>,<124 4>,
+				     <125 4>,<126 4>,<127 4>,<128 4>,<129 4>,
+				     <130 4>,<131 4>,<132 4>,<133 4>,<134 4>,
+				     <135 4>,<136 4>,<137 4>,<138 4>,<139 4>,
+				     <140 4>,<141 4>,<142 4>,<143 4>,<144 4>,
+				     <145 4>,<146 4>,<147 4>,<148 4>,<149 4>,
+				     <150 4>,<151 4>,<152 4>,<153 4>,<154 4>,
+				     <155 4>,<156 4>,<157 4>,<158 4>,<159 4>,
+				     <160 4>,<601 1>,<602 1>,<603 1>,<604 1>,
+				     <605 1>,<606 1>,<607 1>,<608 1>,<609 1>,
+				     <610 1>,<611 1>,<612 1>,<613 1>,<614 1>,
+				     <615 1>,<616 1>,<617 1>,<618 1>,<619 1>,
+				     <620 1>,<621 1>,<622 1>,<623 1>,<624 1>,
+				     <625 1>,<626 1>,<627 1>,<628 1>,<629 1>,
+				     <630 1>,<631 1>,<632 1>;
+			status = "disabled";
+		};
+
+		sas1: sas@a2000000 {
+			compatible = "hisilicon,hip06-sas-v2";
+			reg = <0 0xa2000000 0 0x10000>;
+			sas-addr = [50 01 88 20 16 00 00 00];
+			hisilicon,sas-syscon = <&pcie_subctl>;
+			hip06-sas-v2-quirk-amt;
+			ctrl-reset-reg = <0xa18>;
+			ctrl-reset-sts-reg = <0x5a0c>;
+			ctrl-clock-ena-reg = <0x318>;
+			clocks = <&refclk 0>;
+			queue-count = <16>;
+			phy-count = <8>;
+			dma-coherent;
+			interrupt-parent = <&mbigen_sas1>;
+			interrupts = <64 4>,<65 4>,<66 4>,<67 4>,<68 4>,
+				     <69 4>,<70 4>,<71 4>,<72 4>,<73 4>,
+				     <74 4>,<75 4>,<76 4>,<77 4>,<78 4>,
+				     <79 4>,<80 4>,<81 4>,<82 4>,<83 4>,
+				     <84 4>,<85 4>,<86 4>,<87 4>,<88 4>,
+				     <89 4>,<90 4>,<91 4>,<92 4>,<93 4>,
+				     <94 4>,<95 4>,<96 4>,<97 4>,<98 4>,
+				     <99 4>,<100 4>,<101 4>,<102 4>,<103 4>,
+				     <104 4>,<105 4>,<106 4>,<107 4>,<108 4>,
+				     <109 4>,<110 4>,<111 4>,<112 4>,<113 4>,
+				     <114 4>,<115 4>,<116 4>,<117 4>,<118 4>,
+				     <119 4>,<120 4>,<121 4>,<122 4>,<123 4>,
+				     <124 4>,<125 4>,<126 4>,<127 4>,<128 4>,
+				     <129 4>,<130 4>,<131 4>,<132 4>,<133 4>,
+				     <134 4>,<135 4>,<136 4>,<137 4>,<138 4>,
+				     <139 4>,<140 4>,<141 4>,<142 4>,<143 4>,
+				     <144 4>,<145 4>,<146 4>,<147 4>,<148 4>,
+				     <149 4>,<150 4>,<151 4>,<152 4>,<153 4>,
+				     <154 4>,<155 4>,<156 4>,<157 4>,<158 4>,
+				     <159 4>,<576 1>,<577 1>,<578 1>,<579 1>,
+				     <580 1>,<581 1>,<582 1>,<583 1>,<584 1>,
+				     <585 1>,<586 1>,<587 1>,<588 1>,<589 1>,
+				     <590 1>,<591 1>,<592 1>,<593 1>,<594 1>,
+				     <595 1>,<596 1>,<597 1>,<598 1>,<599 1>,
+				     <600 1>,<601 1>,<602 1>,<603 1>,<604 1>,
+				     <605 1>,<606 1>,<607 1>;
+			status = "disabled";
+		};
+
+		sas2: sas@a3000000 {
+			compatible = "hisilicon,hip06-sas-v2";
+			reg = <0 0xa3000000 0 0x10000>;
+			sas-addr = [50 01 88 20 16 00 00 00];
+			hisilicon,sas-syscon = <&pcie_subctl>;
+			ctrl-reset-reg = <0xae0>;
+			ctrl-reset-sts-reg = <0x5a70>;
+			ctrl-clock-ena-reg = <0x3a8>;
+			clocks = <&refclk 0>;
+			queue-count = <16>;
+			phy-count = <9>;
 			dma-coherent;
+			interrupt-parent = <&mbigen_sas2>;
+			interrupts = <192 4>,<193 4>,<194 4>,<195 4>,<196 4>,
+				     <197 4>,<198 4>,<199 4>,<200 4>,<201 4>,
+				     <202 4>,<203 4>,<204 4>,<205 4>,<206 4>,
+				     <207 4>,<208 4>,<209 4>,<210 4>,<211 4>,
+				     <212 4>,<213 4>,<214 4>,<215 4>,<216 4>,
+				     <217 4>,<218 4>,<219 4>,<220 4>,<221 4>,
+				     <222 4>,<223 4>,<224 4>,<225 4>,<226 4>,
+				     <227 4>,<228 4>,<229 4>,<230 4>,<231 4>,
+				     <232 4>,<233 4>,<234 4>,<235 4>,<236 4>,
+				     <237 4>,<238 4>,<239 4>,<240 4>,<241 4>,
+				     <242 4>,<243 4>,<244 4>,<245 4>,<246 4>,
+				     <247 4>,<248 4>,<249 4>,<250 4>,<251 4>,
+				     <252 4>,<253 4>,<254 4>,<255 4>,<256 4>,
+				     <257 4>,<258 4>,<259 4>,<260 4>,<261 4>,
+				     <262 4>,<263 4>,<264 4>,<265 4>,<266 4>,
+				     <267 4>,<268 4>,<269 4>,<270 4>,<271 4>,
+				     <272 4>,<273 4>,<274 4>,<275 4>,<276 4>,
+				     <277 4>,<278 4>,<279 4>,<280 4>,<281 4>,
+				     <282 4>,<283 4>,<284 4>,<285 4>,<286 4>,
+				     <287 4>,<608 1>,<609 1>,<610 1>,<611 1>,
+				     <612 1>,<613 1>,<614 1>,<615 1>,<616 1>,
+				     <617 1>,<618 1>,<619 1>,<620 1>,<621 1>,
+				     <622 1>,<623 1>,<624 1>,<625 1>,<626 1>,
+				     <627 1>,<628 1>,<629 1>,<630 1>,<631 1>,
+				     <632 1>,<633 1>,<634 1>,<635 1>,<636 1>,
+				     <637 1>,<638 1>,<639 1>;
 			status = "disabled";
 		};
 	};
diff --git a/src/arm64/hisilicon/hip07-d05.dts b/src/arm64/hisilicon/hip07-d05.dts
new file mode 100644
index 000000000000..e05844230583
--- /dev/null
+++ b/src/arm64/hisilicon/hip07-d05.dts
@@ -0,0 +1,66 @@
+/**
+ * dts file for Hisilicon D05 Development Board
+ *
+ * Copyright (C) 2016 Hisilicon Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ */
+
+/dts-v1/;
+
+#include "hip07.dtsi"
+
+/ {
+	model = "Hisilicon Hip07 D05 Development Board";
+	compatible = "hisilicon,hip07-d05";
+
+	/* the mem node will be updated by UEFI. */
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x40000000>;
+		numa-node-id = <0>;
+	};
+
+	distance-map {
+		compatible = "numa-distance-map-v1";
+		distance-matrix = <0 0 10>,
+				  <0 1 15>,
+				  <0 2 20>,
+				  <0 3 25>,
+				  <1 0 15>,
+				  <1 1 10>,
+				  <1 2 25>,
+				  <1 3 30>,
+				  <2 0 20>,
+				  <2 1 25>,
+				  <2 2 10>,
+				  <2 3 15>,
+				  <3 0 25>,
+				  <3 1 30>,
+				  <3 2 15>,
+				  <3 3 10>;
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "ok";
+};
+
+&usb_ohci {
+	status = "ok";
+};
+
+&usb_ehci {
+	status = "ok";
+};
diff --git a/src/arm64/hisilicon/hip07.dtsi b/src/arm64/hisilicon/hip07.dtsi
new file mode 100644
index 000000000000..5144eb1c179d
--- /dev/null
+++ b/src/arm64/hisilicon/hip07.dtsi
@@ -0,0 +1,1059 @@
+/**
+ * dts file for Hisilicon D05 Development Board
+ *
+ * Copyright (C) 2016 Hisilicon Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "hisilicon,hip07-d05";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu8>;
+				};
+				core1 {
+					cpu = <&cpu9>;
+				};
+				core2 {
+					cpu = <&cpu10>;
+				};
+				core3 {
+					cpu = <&cpu11>;
+				};
+			};
+
+			cluster3 {
+				core0 {
+					cpu = <&cpu12>;
+				};
+				core1 {
+					cpu = <&cpu13>;
+				};
+				core2 {
+					cpu = <&cpu14>;
+				};
+				core3 {
+					cpu = <&cpu15>;
+				};
+			};
+
+			cluster4 {
+				core0 {
+					cpu = <&cpu16>;
+				};
+				core1 {
+					cpu = <&cpu17>;
+				};
+				core2 {
+					cpu = <&cpu18>;
+				};
+				core3 {
+					cpu = <&cpu19>;
+				};
+			};
+
+			cluster5 {
+				core0 {
+					cpu = <&cpu20>;
+				};
+				core1 {
+					cpu = <&cpu21>;
+				};
+				core2 {
+					cpu = <&cpu22>;
+				};
+				core3 {
+					cpu = <&cpu23>;
+				};
+			};
+
+			cluster6 {
+				core0 {
+					cpu = <&cpu24>;
+				};
+				core1 {
+					cpu = <&cpu25>;
+				};
+				core2 {
+					cpu = <&cpu26>;
+				};
+				core3 {
+					cpu = <&cpu27>;
+				};
+			};
+
+			cluster7 {
+				core0 {
+					cpu = <&cpu28>;
+				};
+				core1 {
+					cpu = <&cpu29>;
+				};
+				core2 {
+					cpu = <&cpu30>;
+				};
+				core3 {
+					cpu = <&cpu31>;
+				};
+			};
+
+			cluster8 {
+				core0 {
+					cpu = <&cpu32>;
+				};
+				core1 {
+					cpu = <&cpu33>;
+				};
+				core2 {
+					cpu = <&cpu34>;
+				};
+				core3 {
+					cpu = <&cpu35>;
+				};
+			};
+
+			cluster9 {
+				core0 {
+					cpu = <&cpu36>;
+				};
+				core1 {
+					cpu = <&cpu37>;
+				};
+				core2 {
+					cpu = <&cpu38>;
+				};
+				core3 {
+					cpu = <&cpu39>;
+				};
+			};
+
+			cluster10 {
+				core0 {
+					cpu = <&cpu40>;
+				};
+				core1 {
+					cpu = <&cpu41>;
+				};
+				core2 {
+					cpu = <&cpu42>;
+				};
+				core3 {
+					cpu = <&cpu43>;
+				};
+			};
+
+			cluster11 {
+				core0 {
+					cpu = <&cpu44>;
+				};
+				core1 {
+					cpu = <&cpu45>;
+				};
+				core2 {
+					cpu = <&cpu46>;
+				};
+				core3 {
+					cpu = <&cpu47>;
+				};
+			};
+
+			cluster12 {
+				core0 {
+					cpu = <&cpu48>;
+				};
+				core1 {
+					cpu = <&cpu49>;
+				};
+				core2 {
+					cpu = <&cpu50>;
+				};
+				core3 {
+					cpu = <&cpu51>;
+				};
+			};
+
+			cluster13 {
+				core0 {
+					cpu = <&cpu52>;
+				};
+				core1 {
+					cpu = <&cpu53>;
+				};
+				core2 {
+					cpu = <&cpu54>;
+				};
+				core3 {
+					cpu = <&cpu55>;
+				};
+			};
+
+			cluster14 {
+				core0 {
+					cpu = <&cpu56>;
+				};
+				core1 {
+					cpu = <&cpu57>;
+				};
+				core2 {
+					cpu = <&cpu58>;
+				};
+				core3 {
+					cpu = <&cpu59>;
+				};
+			};
+
+			cluster15 {
+				core0 {
+					cpu = <&cpu60>;
+				};
+				core1 {
+					cpu = <&cpu61>;
+				};
+				core2 {
+					cpu = <&cpu62>;
+				};
+				core3 {
+					cpu = <&cpu63>;
+				};
+			};
+		};
+
+		cpu0: cpu@10000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x10000>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu1: cpu@10001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x10001>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu2: cpu@10002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x10002>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu3: cpu@10003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x10003>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu4: cpu@10100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x10100>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu5: cpu@10101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x10101>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu6: cpu@10102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x10102>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu7: cpu@10103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x10103>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu8: cpu@10200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x10200>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu9: cpu@10201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x10201>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu10: cpu@10202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x10202>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu11: cpu@10203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x10203>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu12: cpu@10300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x10300>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu13: cpu@10301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x10301>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu14: cpu@10302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x10302>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu15: cpu@10303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x10303>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu16: cpu@30000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x30000>;
+			enable-method = "psci";
+			next-level-cache = <&cluster4_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu17: cpu@30001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x30001>;
+			enable-method = "psci";
+			next-level-cache = <&cluster4_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu18: cpu@30002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x30002>;
+			enable-method = "psci";
+			next-level-cache = <&cluster4_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu19: cpu@30003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x30003>;
+			enable-method = "psci";
+			next-level-cache = <&cluster4_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu20: cpu@30100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x30100>;
+			enable-method = "psci";
+			next-level-cache = <&cluster5_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu21: cpu@30101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x30101>;
+			enable-method = "psci";
+			next-level-cache = <&cluster5_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu22: cpu@30102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x30102>;
+			enable-method = "psci";
+			next-level-cache = <&cluster5_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu23: cpu@30103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x30103>;
+			enable-method = "psci";
+			next-level-cache = <&cluster5_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu24: cpu@30200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x30200>;
+			enable-method = "psci";
+			next-level-cache = <&cluster6_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu25: cpu@30201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x30201>;
+			enable-method = "psci";
+			next-level-cache = <&cluster6_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu26: cpu@30202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x30202>;
+			enable-method = "psci";
+			next-level-cache = <&cluster6_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu27: cpu@30203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x30203>;
+			enable-method = "psci";
+			next-level-cache = <&cluster6_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu28: cpu@30300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x30300>;
+			enable-method = "psci";
+			next-level-cache = <&cluster7_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu29: cpu@30301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x30301>;
+			enable-method = "psci";
+			next-level-cache = <&cluster7_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu30: cpu@30302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x30302>;
+			enable-method = "psci";
+			next-level-cache = <&cluster7_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu31: cpu@30303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x30303>;
+			enable-method = "psci";
+			next-level-cache = <&cluster7_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu32: cpu@50000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x50000>;
+			enable-method = "psci";
+			next-level-cache = <&cluster8_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu33: cpu@50001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x50001>;
+			enable-method = "psci";
+			next-level-cache = <&cluster8_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu34: cpu@50002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x50002>;
+			enable-method = "psci";
+			next-level-cache = <&cluster8_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu35: cpu@50003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x50003>;
+			enable-method = "psci";
+			next-level-cache = <&cluster8_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu36: cpu@50100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x50100>;
+			enable-method = "psci";
+			next-level-cache = <&cluster9_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu37: cpu@50101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x50101>;
+			enable-method = "psci";
+			next-level-cache = <&cluster9_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu38: cpu@50102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x50102>;
+			enable-method = "psci";
+			next-level-cache = <&cluster9_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu39: cpu@50103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x50103>;
+			enable-method = "psci";
+			next-level-cache = <&cluster9_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu40: cpu@50200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x50200>;
+			enable-method = "psci";
+			next-level-cache = <&cluster10_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu41: cpu@50201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x50201>;
+			enable-method = "psci";
+			next-level-cache = <&cluster10_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu42: cpu@50202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x50202>;
+			enable-method = "psci";
+			next-level-cache = <&cluster10_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu43: cpu@50203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x50203>;
+			enable-method = "psci";
+			next-level-cache = <&cluster10_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu44: cpu@50300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x50300>;
+			enable-method = "psci";
+			next-level-cache = <&cluster11_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu45: cpu@50301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x50301>;
+			enable-method = "psci";
+			next-level-cache = <&cluster11_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu46: cpu@50302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x50302>;
+			enable-method = "psci";
+			next-level-cache = <&cluster11_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu47: cpu@50303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x50303>;
+			enable-method = "psci";
+			next-level-cache = <&cluster11_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu48: cpu@70000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x70000>;
+			enable-method = "psci";
+			next-level-cache = <&cluster12_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu49: cpu@70001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x70001>;
+			enable-method = "psci";
+			next-level-cache = <&cluster12_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu50: cpu@70002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x70002>;
+			enable-method = "psci";
+			next-level-cache = <&cluster12_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu51: cpu@70003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x70003>;
+			enable-method = "psci";
+			next-level-cache = <&cluster12_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu52: cpu@70100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x70100>;
+			enable-method = "psci";
+			next-level-cache = <&cluster13_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu53: cpu@70101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x70101>;
+			enable-method = "psci";
+			next-level-cache = <&cluster13_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu54: cpu@70102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x70102>;
+			enable-method = "psci";
+			next-level-cache = <&cluster13_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu55: cpu@70103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x70103>;
+			enable-method = "psci";
+			next-level-cache = <&cluster13_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu56: cpu@70200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x70200>;
+			enable-method = "psci";
+			next-level-cache = <&cluster14_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu57: cpu@70201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x70201>;
+			enable-method = "psci";
+			next-level-cache = <&cluster14_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu58: cpu@70202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x70202>;
+			enable-method = "psci";
+			next-level-cache = <&cluster14_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu59: cpu@70203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x70203>;
+			enable-method = "psci";
+			next-level-cache = <&cluster14_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu60: cpu@70300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x70300>;
+			enable-method = "psci";
+			next-level-cache = <&cluster15_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu61: cpu@70301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x70301>;
+			enable-method = "psci";
+			next-level-cache = <&cluster15_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu62: cpu@70302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x70302>;
+			enable-method = "psci";
+			next-level-cache = <&cluster15_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu63: cpu@70303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x70303>;
+			enable-method = "psci";
+			next-level-cache = <&cluster15_l2>;
+			numa-node-id = <3>;
+		};
+
+		cluster0_l2: l2-cache0 {
+			compatible = "cache";
+		};
+
+		cluster1_l2: l2-cache1 {
+			compatible = "cache";
+		};
+
+		cluster2_l2: l2-cache2 {
+			compatible = "cache";
+		};
+
+		cluster3_l2: l2-cache3 {
+			compatible = "cache";
+		};
+
+		cluster4_l2: l2-cache4 {
+			compatible = "cache";
+		};
+
+		cluster5_l2: l2-cache5 {
+			compatible = "cache";
+		};
+
+		cluster6_l2: l2-cache6 {
+			compatible = "cache";
+		};
+
+		cluster7_l2: l2-cache7 {
+			compatible = "cache";
+		};
+
+		cluster8_l2: l2-cache8 {
+			compatible = "cache";
+		};
+
+		cluster9_l2: l2-cache9 {
+			compatible = "cache";
+		};
+
+		cluster10_l2: l2-cache10 {
+			compatible = "cache";
+		};
+
+		cluster11_l2: l2-cache11 {
+			compatible = "cache";
+		};
+
+		cluster12_l2: l2-cache12 {
+			compatible = "cache";
+		};
+
+		cluster13_l2: l2-cache13 {
+			compatible = "cache";
+		};
+
+		cluster14_l2: l2-cache14 {
+			compatible = "cache";
+		};
+
+		cluster15_l2: l2-cache15 {
+			compatible = "cache";
+		};
+	};
+
+	gic: interrupt-controller@4d000000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+		#redistributor-regions = <4>;
+		redistributor-stride = <0x0 0x40000>;
+		reg = <0x0 0x4d000000 0x0 0x10000>,	/* GICD */
+		      <0x0 0x4d100000 0x0 0x400000>,	/* p0 GICR node 0 */
+		      <0x0 0x6d100000 0x0 0x400000>,	/* p0 GICR node 1 */
+		      <0x400 0x4d100000 0x0 0x400000>,	/* p1 GICR node 2 */
+		      <0x400 0x6d100000 0x0 0x400000>,	/* p1 GICR node 3 */
+		      <0x0 0xfe000000 0x0 0x10000>,	/* GICC */
+		      <0x0 0xfe010000 0x0 0x10000>,	/* GICH */
+		      <0x0 0xfe020000 0x0 0x10000>;	/* GICV */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		p0_its_peri_a: interrupt-controller@4c000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0x4c000000 0x0 0x40000>;
+		};
+
+		p0_its_peri_b: interrupt-controller@6c000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0x6c000000 0x0 0x40000>;
+		};
+
+		p0_its_dsa_a: interrupt-controller@c6000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0xc6000000 0x0 0x40000>;
+		};
+
+		p0_its_dsa_b: interrupt-controller@8,c6000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x8 0xc6000000 0x0 0x40000>;
+		};
+
+		p1_its_peri_a: interrupt-controller@400,4c000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x400 0x4c000000 0x0 0x40000>;
+		};
+
+		p1_its_peri_b: interrupt-controller@400,6c000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x400 0x6c000000 0x0 0x40000>;
+		};
+
+		p1_its_dsa_a: interrupt-controller@400,c6000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x400 0xc6000000 0x0 0x40000>;
+		};
+
+		p1_its_dsa_b: interrupt-controller@408,c6000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x408 0xc6000000 0x0 0x40000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	p0_mbigen_peri_b: interrupt-controller@60080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x0 0x60080000 0x0 0x10000>;
+
+		mbigen_uart: uart_intc {
+			msi-parent = <&p0_its_peri_b 0x120c7>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <1>;
+		};
+	};
+
+	p0_mbigen_pcie_a: interrupt-controller@a0080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x0 0xa0080000 0x0 0x10000>;
+
+		mbigen_usb: intc_usb {
+			msi-parent = <&p0_its_dsa_a 0x40080>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <2>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		uart0: uart@602b0000 {
+			compatible = "arm,sbsa-uart";
+			reg = <0x0 0x602b0000 0x0 0x1000>;
+			interrupt-parent = <&mbigen_uart>;
+			interrupts = <807 4>;
+			current-speed = <115200>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		usb_ohci: ohci@a7030000 {
+			compatible = "generic-ohci";
+			reg = <0x0 0xa7030000 0x0 0x10000>;
+			interrupt-parent = <&mbigen_usb>;
+			interrupts = <640 4>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		usb_ehci: ehci@a7020000 {
+			compatible = "generic-ehci";
+			reg = <0x0 0xa7020000 0x0 0x10000>;
+			interrupt-parent = <&mbigen_usb>;
+			interrupts = <641 4>;
+			dma-coherent;
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/arm64/lg/lg1313-ref.dts b/src/arm64/lg/lg1313-ref.dts
new file mode 100644
index 000000000000..df0ece43cfbf
--- /dev/null
+++ b/src/arm64/lg/lg1313-ref.dts
@@ -0,0 +1,36 @@
+/*
+ * dts file for lg1313 Reference Board.
+ *
+ * Copyright (C) 2016, LG Electronics
+ */
+
+/dts-v1/;
+
+#include "lg1313.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	model = "LG Electronics, DTV SoC LG1313 Reference Board";
+	compatible = "lge,lg1313-ref", "lge,lg1313";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x20000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm64/lg/lg1313.dtsi b/src/arm64/lg/lg1313.dtsi
new file mode 100644
index 000000000000..e703e1149c75
--- /dev/null
+++ b/src/arm64/lg/lg1313.dtsi
@@ -0,0 +1,351 @@
+/*
+ * dts file for lg1313 SoC
+ *
+ * Copyright (C) 2016, LG Electronics
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	compatible = "lge,lg1313";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	psci {
+		compatible  = "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0x84000003>;
+	};
+
+	gic: interrupt-controller@c0001000 {
+		#interrupt-cells = <3>;
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		reg = <0x0 0xc0001000 0x1000>,
+		      <0x0 0xc0002000 0x2000>,
+		      <0x0 0xc0004000 0x2000>,
+		      <0x0 0xc0006000 0x2000>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clk_bus: clk_bus {
+		#clock-cells = <0>;
+
+		compatible = "fixed-clock";
+		clock-frequency = <198000000>;
+		clock-output-names = "BUSCLK";
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		eth0: ethernet@c3700000 {
+			compatible = "cdns,gem";
+			reg = <0x0 0xc3700000 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "hclk", "pclk";
+			phy-mode = "rmii";
+			/* Filled in by boot */
+			mac-address = [ 00 00 00 00 00 00 ];
+		};
+	};
+
+	amba {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		#interrupts-cells = <3>;
+
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		timers: timer@fd100000 {
+			compatible = "arm,sp804";
+			reg = <0x0 0xfd100000 0x1000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		wdog: watchdog@fd200000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xfd200000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		uart0: serial@fe000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe000000 0x1000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		uart1: serial@fe100000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe100000 0x1000>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		uart2: serial@fe200000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe200000 0x1000>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		spi0: ssp@fe800000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xfe800000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		spi1: ssp@fe900000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xfe900000 0x1000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		dmac0: dma@c1128000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xc1128000 0x1000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		gpio0: gpio@fd400000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd400000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio1: gpio@fd410000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd410000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio2: gpio@fd420000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd420000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio3: gpio@fd430000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd430000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		gpio4: gpio@fd440000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd440000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio5: gpio@fd450000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd450000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio6: gpio@fd460000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd460000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio7: gpio@fd470000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd470000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio8: gpio@fd480000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd480000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio9: gpio@fd490000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd490000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio10: gpio@fd4a0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4a0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio11: gpio@fd4b0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4b0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		gpio12: gpio@fd4c0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4c0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio13: gpio@fd4d0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4d0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio14: gpio@fd4e0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4e0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio15: gpio@fd4f0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4f0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio16: gpio@fd500000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd500000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio17: gpio@fd510000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd510000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+	};
+};
diff --git a/src/arm64/marvell/armada-3720-db.dts b/src/arm64/marvell/armada-3720-db.dts
index 86110a6ae330..89de0a751093 100644
--- a/src/arm64/marvell/armada-3720-db.dts
+++ b/src/arm64/marvell/armada-3720-db.dts
@@ -56,7 +56,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
 	};
@@ -76,3 +76,31 @@
 &usb3 {
 	status = "okay";
 };
+
+/* CON17 (PCIe) / CON12 (mini-PCIe) */
+&pcie0 {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	phy-mode = "rgmii-id";
+	phy = <&phy0>;
+	status = "okay";
+};
+
+&eth1 {
+	phy-mode = "sgmii";
+	phy = <&phy1>;
+	status = "okay";
+};
diff --git a/src/arm64/marvell/armada-3720-espressobin.dts b/src/arm64/marvell/armada-3720-espressobin.dts
new file mode 100644
index 000000000000..83178d909fc2
--- /dev/null
+++ b/src/arm64/marvell/armada-3720-espressobin.dts
@@ -0,0 +1,82 @@
+/*
+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board
+ * Copyright (C) 2016 Marvell
+ *
+ * Romain Perier <romain.perier@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "armada-372x.dtsi"
+
+/ {
+	model = "Globalscale Marvell ESPRESSOBin Board";
+	compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+};
+
+/* J9 */
+&pcie0 {
+	status = "okay";
+};
+
+/* J6 */
+&sata {
+	status = "okay";
+};
+
+/* Exported on the micro USB connector J5 through an FTDI */
+&uart0 {
+	status = "okay";
+};
+
+/* J7 */
+&usb3 {
+	status = "okay";
+};
diff --git a/src/arm64/marvell/armada-37xx.dtsi b/src/arm64/marvell/armada-37xx.dtsi
index 9e2efb882983..bab5c6ff5745 100644
--- a/src/arm64/marvell/armada-37xx.dtsi
+++ b/src/arm64/marvell/armada-37xx.dtsi
@@ -91,7 +91,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		internal-regs {
+		internal-regs@d0000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
@@ -105,6 +105,64 @@
 				status = "disabled";
 			};
 
+			nb_periph_clk: nb-periph-clk@13000 {
+				compatible = "marvell,armada-3700-periph-clock-nb";
+				reg = <0x13000 0x100>;
+				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+				<&tbg 3>, <&xtalclk>;
+				#clock-cells = <1>;
+			};
+
+			sb_periph_clk: sb-periph-clk@18000 {
+				compatible = "marvell,armada-3700-periph-clock-sb";
+				reg = <0x18000 0x100>;
+				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+				<&tbg 3>, <&xtalclk>;
+				#clock-cells = <1>;
+			};
+
+			tbg: tbg@13200 {
+				compatible = "marvell,armada-3700-tbg-clock";
+				reg = <0x13200 0x100>;
+				clocks = <&xtalclk>;
+				#clock-cells = <1>;
+			};
+
+			gpio1: gpio@13800 {
+				compatible = "marvell,mvebu-gpio-3700",
+				"syscon", "simple-mfd";
+				reg = <0x13800 0x500>;
+
+				xtalclk: xtal-clk {
+					compatible = "marvell,armada-3700-xtal-clock";
+					clock-output-names = "xtal";
+					#clock-cells = <0>;
+				};
+			};
+
+			eth0: ethernet@30000 {
+				   compatible = "marvell,armada-3700-neta";
+				   reg = <0x30000 0x4000>;
+				   interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				   clocks = <&sb_periph_clk 8>;
+				   status = "disabled";
+			};
+
+			mdio: mdio@32004 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x32004 0x4>;
+			};
+
+			eth1: ethernet@40000 {
+				compatible = "marvell,armada-3700-neta";
+				reg = <0x40000 0x4000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sb_periph_clk 7>;
+				status = "disabled";
+			};
+
 			usb3: usb@58000 {
 				compatible = "marvell,armada3700-xhci",
 				"generic-xhci";
@@ -141,5 +199,30 @@
 				      <0x1d40000 0x40000>; /* GICR */
 			};
 		};
+
+		pcie0: pcie@d0070000 {
+			compatible = "marvell,armada-3700-pcie";
+			device_type = "pci";
+			status = "disabled";
+			reg = <0 0xd0070000 0 0x20000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			msi-parent = <&pcie0>;
+			msi-controller;
+			ranges = <0x82000000 0 0xe8000000   0 0xe8000000 0 0x1000000 /* Port 0 MEM */
+				  0x81000000 0 0xe9000000   0 0xe9000000 0 0x10000>; /* Port 0 IO*/
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc 0>,
+					<0 0 0 2 &pcie_intc 1>,
+					<0 0 0 3 &pcie_intc 2>,
+					<0 0 0 4 &pcie_intc 3>;
+			pcie_intc: interrupt-controller {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
 	};
 };
diff --git a/src/arm64/marvell/armada-8020.dtsi b/src/arm64/marvell/armada-8020.dtsi
index 3753c1c6d54d..048e5cf5160e 100644
--- a/src/arm64/marvell/armada-8020.dtsi
+++ b/src/arm64/marvell/armada-8020.dtsi
@@ -47,6 +47,7 @@
 
 #include "armada-ap806-dual.dtsi"
 #include "armada-cp110-master.dtsi"
+#include "armada-cp110-slave.dtsi"
 
 / {
 	model = "Marvell Armada 8020";
diff --git a/src/arm64/marvell/armada-8040-db.dts b/src/arm64/marvell/armada-8040-db.dts
new file mode 100644
index 000000000000..6e6f182fb297
--- /dev/null
+++ b/src/arm64/marvell/armada-8040-db.dts
@@ -0,0 +1,150 @@
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada 8040 Development board platform
+ */
+
+#include "armada-8040.dtsi"
+
+/ {
+	model = "Marvell Armada 8040 DB board";
+	compatible = "marvell,armada8040-db", "marvell,armada8040",
+		     "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x200000>;
+			};
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xce0000>;
+			};
+		};
+	};
+};
+
+/* Accessible over the mini-USB CON9 connector on the main board */
+&uart0 {
+	status = "okay";
+};
+
+
+/* CON5 on CP0 expansion */
+&cpm_pcie2 {
+	status = "okay";
+};
+
+&cpm_i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+/* CON4 on CP0 expansion */
+&cpm_sata0 {
+	status = "okay";
+};
+
+/* CON9 on CP0 expansion */
+&cpm_usb3_0 {
+	status = "okay";
+};
+
+/* CON10 on CP0 expansion */
+&cpm_usb3_1 {
+	status = "okay";
+};
+
+/* CON5 on CP1 expansion */
+&cps_pcie2 {
+	status = "okay";
+};
+
+&cps_i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+/* CON4 on CP1 expansion */
+&cps_sata0 {
+	status = "okay";
+};
+
+/* CON9 on CP1 expansion */
+&cps_usb3_0 {
+	status = "okay";
+};
+
+/* CON10 on CP1 expansion */
+&cps_usb3_1 {
+	status = "okay";
+};
diff --git a/src/arm64/marvell/armada-8040.dtsi b/src/arm64/marvell/armada-8040.dtsi
index 8bd0d8f8ad4c..9c1b28c47683 100644
--- a/src/arm64/marvell/armada-8040.dtsi
+++ b/src/arm64/marvell/armada-8040.dtsi
@@ -47,6 +47,7 @@
 
 #include "armada-ap806-quad.dtsi"
 #include "armada-cp110-master.dtsi"
+#include "armada-cp110-slave.dtsi"
 
 / {
 	model = "Marvell Armada 8040";
diff --git a/src/arm64/marvell/armada-ap806.dtsi b/src/arm64/marvell/armada-ap806.dtsi
index 20d256b32670..a749ba2edec4 100644
--- a/src/arm64/marvell/armada-ap806.dtsi
+++ b/src/arm64/marvell/armada-ap806.dtsi
@@ -71,7 +71,7 @@
 		interrupt-parent = <&gic>;
 		ranges;
 
-		config-space {
+		config-space@f0000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
@@ -122,10 +122,16 @@
 
 			timer {
 				compatible = "arm,armv8-timer";
-				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
-					     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
-					     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
-					     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+					     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+					     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+					     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			};
+
+			pmu {
+				compatible = "arm,cortex-a72-pmu";
+				interrupt-parent = <&pic>;
+				interrupts = <17>;
 			};
 
 			odmi: odmi@300000 {
@@ -140,8 +146,16 @@
 				marvell,spi-base = <128>, <136>, <144>, <152>;
 			};
 
+			pic: interrupt-controller@3f0100 {
+				compatible = "marvell,armada-8k-pic";
+				reg = <0x3f0100 0x10>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			xor@400000 {
-				compatible = "marvell,mv-xor-v2";
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
 				reg = <0x400000 0x1000>,
 				      <0x410000 0x1000>;
 				msi-parent = <&gic_v2m0>;
@@ -149,7 +163,7 @@
 			};
 
 			xor@420000 {
-				compatible = "marvell,mv-xor-v2";
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
 				reg = <0x420000 0x1000>,
 				      <0x430000 0x1000>;
 				msi-parent = <&gic_v2m0>;
@@ -157,7 +171,7 @@
 			};
 
 			xor@440000 {
-				compatible = "marvell,mv-xor-v2";
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
 				reg = <0x440000 0x1000>,
 				      <0x450000 0x1000>;
 				msi-parent = <&gic_v2m0>;
@@ -165,7 +179,7 @@
 			};
 
 			xor@460000 {
-				compatible = "marvell,mv-xor-v2";
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
 				reg = <0x460000 0x1000>,
 				      <0x470000 0x1000>;
 				msi-parent = <&gic_v2m0>;
diff --git a/src/arm64/marvell/armada-cp110-master.dtsi b/src/arm64/marvell/armada-cp110-master.dtsi
index 367138bae3e0..05222f749a45 100644
--- a/src/arm64/marvell/armada-cp110-master.dtsi
+++ b/src/arm64/marvell/armada-cp110-master.dtsi
@@ -52,7 +52,7 @@
 		interrupt-parent = <&gic>;
 		ranges;
 
-		config-space {
+		config-space@f2000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
@@ -107,13 +107,31 @@
 				status = "disabled";
 			};
 
+			cpm_xor0: xor@6a0000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x6a0000 0x1000>,
+				      <0x6b0000 0x1000>;
+				dma-coherent;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&cpm_syscon0 1 8>;
+			};
+
+			cpm_xor1: xor@6c0000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x6c0000 0x1000>,
+				      <0x6d0000 0x1000>;
+				dma-coherent;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&cpm_syscon0 1 7>;
+			};
+
 			cpm_spi0: spi@700600 {
 				compatible = "marvell,armada-380-spi";
 				reg = <0x700600 0x50>;
 				#address-cells = <0x1>;
 				#size-cells = <0x0>;
 				cell-index = <1>;
-				clocks = <&cpm_syscon0 0 3>;
+				clocks = <&cpm_syscon0 1 21>;
 				status = "disabled";
 			};
 
@@ -146,6 +164,14 @@
 				clocks = <&cpm_syscon0 1 21>;
 				status = "disabled";
 			};
+
+			cpm_trng: trng@760000 {
+				compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76";
+				reg = <0x760000 0x7d>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cpm_syscon0 1 25>;
+				status = "okay";
+			};
 		};
 
 		cpm_pcie0: pcie@f2600000 {
@@ -158,6 +184,7 @@
 			#interrupt-cells = <1>;
 			device_type = "pci";
 			dma-coherent;
+			msi-parent = <&gic_v2m0>;
 
 			bus-range = <0 0xff>;
 			ranges =
@@ -183,6 +210,7 @@
 			#interrupt-cells = <1>;
 			device_type = "pci";
 			dma-coherent;
+			msi-parent = <&gic_v2m0>;
 
 			bus-range = <0 0xff>;
 			ranges =
@@ -209,6 +237,7 @@
 			#interrupt-cells = <1>;
 			device_type = "pci";
 			dma-coherent;
+			msi-parent = <&gic_v2m0>;
 
 			bus-range = <0 0xff>;
 			ranges =
diff --git a/src/arm64/marvell/armada-cp110-slave.dtsi b/src/arm64/marvell/armada-cp110-slave.dtsi
new file mode 100644
index 000000000000..638820ce977d
--- /dev/null
+++ b/src/arm64/marvell/armada-cp110-slave.dtsi
@@ -0,0 +1,257 @@
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada CP110 Slave.
+ */
+
+/ {
+	cp110-slave {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		config-space@f4000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			interrupt-parent = <&gic>;
+			ranges = <0x0 0x0 0xf4000000 0x2000000>;
+
+			cps_syscon0: system-controller@440000 {
+				compatible = "marvell,cp110-system-controller0",
+					     "syscon";
+				reg = <0x440000 0x1000>;
+				#clock-cells = <2>;
+				core-clock-output-names =
+					"cps-apll", "cps-ppv2-core", "cps-eip",
+					"cps-core", "cps-nand-core";
+				gate-clock-output-names =
+					"cps-audio", "cps-communit", "cps-nand",
+					"cps-ppv2", "cps-sdio", "cps-mg-domain",
+					"cps-mg-core", "cps-xor1", "cps-xor0",
+					"cps-gop-dp", "none", "cps-pcie_x10",
+					"cps-pcie_x11", "cps-pcie_x4", "cps-pcie-xor",
+					"cps-sata", "cps-sata-usb", "cps-main",
+					"cps-sd-mmc", "none", "none",
+					"cps-slow-io", "cps-usb3h0", "cps-usb3h1",
+					"cps-usb3dev", "cps-eip150", "cps-eip197";
+			};
+
+			cps_sata0: sata@540000 {
+				compatible = "marvell,armada-8k-ahci";
+				reg = <0x540000 0x30000>;
+				interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_syscon0 1 15>;
+				status = "disabled";
+			};
+
+			cps_usb3_0: usb3@500000 {
+				compatible = "marvell,armada-8k-xhci",
+					     "generic-xhci";
+				reg = <0x500000 0x4000>;
+				dma-coherent;
+				interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_syscon0 1 22>;
+				status = "disabled";
+			};
+
+			cps_usb3_1: usb3@510000 {
+				compatible = "marvell,armada-8k-xhci",
+					     "generic-xhci";
+				reg = <0x510000 0x4000>;
+				dma-coherent;
+				interrupts = <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_syscon0 1 23>;
+				status = "disabled";
+			};
+
+			cps_xor0: xor@6a0000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x6a0000 0x1000>,
+				      <0x6b0000 0x1000>;
+				dma-coherent;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&cps_syscon0 1 8>;
+			};
+
+			cps_xor1: xor@6c0000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x6c0000 0x1000>,
+				      <0x6d0000 0x1000>;
+				dma-coherent;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&cps_syscon0 1 7>;
+			};
+
+			cps_spi0: spi@700600 {
+				compatible = "marvell,armada-380-spi";
+				reg = <0x700600 0x50>;
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+				cell-index = <3>;
+				clocks = <&cps_syscon0 1 21>;
+				status = "disabled";
+			};
+
+			cps_spi1: spi@700680 {
+				compatible = "marvell,armada-380-spi";
+				reg = <0x700680 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <4>;
+				clocks = <&cps_syscon0 1 21>;
+				status = "disabled";
+			};
+
+			cps_i2c0: i2c@701000 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x701000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_syscon0 1 21>;
+				status = "disabled";
+			};
+
+			cps_i2c1: i2c@701100 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x701100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_syscon0 1 21>;
+				status = "disabled";
+			};
+
+			cps_trng: trng@760000 {
+				compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76";
+				reg = <0x760000 0x7d>;
+				interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_syscon0 1 25>;
+				status = "okay";
+			};
+		};
+
+		cps_pcie0: pcie@f4600000 {
+			compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+			reg = <0 0xf4600000 0 0x10000>,
+			      <0 0xfaf00000 0 0x80000>;
+			reg-names = "ctrl", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			dma-coherent;
+			msi-parent = <&gic_v2m0>;
+
+			bus-range = <0 0xff>;
+			ranges =
+				/* downstream I/O */
+				<0x81000000 0 0xfd000000 0  0xfd000000 0 0x10000
+				/* non-prefetchable memory */
+				0x82000000 0 0xfa000000 0  0xfa000000 0 0xf00000>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			num-lanes = <1>;
+			clocks = <&cps_syscon0 1 13>;
+			status = "disabled";
+		};
+
+		cps_pcie1: pcie@f4620000 {
+			compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+			reg = <0 0xf4620000 0 0x10000>,
+			      <0 0xfbf00000 0 0x80000>;
+			reg-names = "ctrl", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			dma-coherent;
+			msi-parent = <&gic_v2m0>;
+
+			bus-range = <0 0xff>;
+			ranges =
+				/* downstream I/O */
+				<0x81000000 0 0xfd010000 0  0xfd010000 0 0x10000
+				/* non-prefetchable memory */
+				0x82000000 0 0xfb000000 0  0xfb000000 0 0xf00000>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
+
+			num-lanes = <1>;
+			clocks = <&cps_syscon0 1 11>;
+			status = "disabled";
+		};
+
+		cps_pcie2: pcie@f4640000 {
+			compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+			reg = <0 0xf4640000 0 0x10000>,
+			      <0 0xfcf00000 0 0x80000>;
+			reg-names = "ctrl", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			dma-coherent;
+			msi-parent = <&gic_v2m0>;
+
+			bus-range = <0 0xff>;
+			ranges =
+				/* downstream I/O */
+				<0x81000000 0 0xfd020000 0  0xfd020000 0 0x10000
+				/* non-prefetchable memory */
+				0x82000000 0 0xfc000000 0  0xfc000000 0 0xf00000>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>;
+
+			num-lanes = <1>;
+			clocks = <&cps_syscon0 1 12>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/arm64/marvell/berlin4ct-dmp.dts b/src/arm64/marvell/berlin4ct-dmp.dts
index 0d70d39fa8d2..fae6c6924705 100644
--- a/src/arm64/marvell/berlin4ct-dmp.dts
+++ b/src/arm64/marvell/berlin4ct-dmp.dts
@@ -54,7 +54,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@1000000 {
 		device_type = "memory";
 		/* the first 16MB is for firmwares' usage */
 		reg = <0 0x01000000 0 0x7f000000>;
diff --git a/src/arm64/marvell/berlin4ct-stb.dts b/src/arm64/marvell/berlin4ct-stb.dts
index 348c37ecf069..d47edad13e68 100644
--- a/src/arm64/marvell/berlin4ct-stb.dts
+++ b/src/arm64/marvell/berlin4ct-stb.dts
@@ -54,7 +54,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@1000000 {
 		device_type = "memory";
 		/* the first 16MB is for firmwares' usage */
 		reg = <0 0x01000000 0 0x7f000000>;
diff --git a/src/arm64/marvell/berlin4ct.dtsi b/src/arm64/marvell/berlin4ct.dtsi
index 099ad93bb49b..d6b800fd26d0 100644
--- a/src/arm64/marvell/berlin4ct.dtsi
+++ b/src/arm64/marvell/berlin4ct.dtsi
@@ -68,6 +68,7 @@
 			device_type = "cpu";
 			reg = <0x0>;
 			enable-method = "psci";
+			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 
@@ -76,6 +77,7 @@
 			device_type = "cpu";
 			reg = <0x1>;
 			enable-method = "psci";
+			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 
@@ -84,6 +86,7 @@
 			device_type = "cpu";
 			reg = <0x2>;
 			enable-method = "psci";
+			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 
@@ -92,9 +95,14 @@
 			device_type = "cpu";
 			reg = <0x3>;
 			enable-method = "psci";
+			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 
+		l2: cache {
+			compatible = "cache";
+		};
+
 		idle-states {
 			entry-method = "psci";
 			CPU_SLEEP_0: cpu-sleep-0 {
@@ -115,7 +123,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
@@ -134,7 +142,7 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
-	soc {
+	soc@f7000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -279,7 +287,6 @@
 				reg = <0x4000 0x100>;
 				clocks = <&osc>;
 				interrupts = <1>;
-				status = "disabled";
 			};
 
 			wdt2: watchdog@5000 {
@@ -287,7 +294,6 @@
 				reg = <0x5000 0x100>;
 				clocks = <&osc>;
 				interrupts = <2>;
-				status = "disabled";
 			};
 
 			sm_gpio0: gpio@8000 {
diff --git a/src/arm64/mediatek/mt6755-evb.dts b/src/arm64/mediatek/mt6755-evb.dts
new file mode 100644
index 000000000000..c568d49235af
--- /dev/null
+++ b/src/arm64/mediatek/mt6755-evb.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt6755.dtsi"
+
+/ {
+	model = "MediaTek MT6755 EVB";
+	compatible = "mediatek,mt6755-evb", "mediatek,mt6755";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x1e800000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm64/mediatek/mt6755.dtsi b/src/arm64/mediatek/mt6755.dtsi
new file mode 100644
index 000000000000..01ba77669717
--- /dev/null
+++ b/src/arm64/mediatek/mt6755.dtsi
@@ -0,0 +1,145 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "mediatek,mt6755";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x001>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x002>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x003>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x100>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x101>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x102>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x103>;
+		};
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13
+			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	sysirq: intpol-controller@10200620 {
+		compatible = "mediatek,mt6755-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10200620 0 0x20>;
+	};
+
+	gic: interrupt-controller@10231000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		interrupt-controller;
+		reg = <0 0x10231000 0 0x1000>,
+		      <0 0x10232000 0 0x2000>,
+		      <0 0x10234000 0 0x2000>,
+		      <0 0x10236000 0 0x2000>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt6755-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11002000 0 0x400>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt6755-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11003000 0 0x400>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+};
diff --git a/src/arm64/mediatek/mt8173-evb.dts b/src/arm64/mediatek/mt8173-evb.dts
index 7453a47b3047..0ecaad4333a7 100644
--- a/src/arm64/mediatek/mt8173-evb.dts
+++ b/src/arm64/mediatek/mt8173-evb.dts
@@ -34,6 +34,23 @@
 
 	chosen { };
 
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "d";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi0_out>;
+			};
+		};
+	};
+
+	extcon_usb: extcon_iddig {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
+	};
+
 	usb_p1_vbus: regulator@0 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_vbus";
@@ -42,6 +59,41 @@
 		gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	usb_p0_vbus: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&cec {
+	status = "okay";
+};
+
+&dpi0 {
+	status = "okay";
+};
+
+&hdmi_phy {
+	status = "okay";
+};
+
+&hdmi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
 };
 
 &i2c1 {
@@ -205,6 +257,20 @@
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 	};
+
+	usb_id_pins_float: usb_iddig_pull_up {
+		pins_iddig {
+			pinmux = <MT8173_PIN_16_IDDIG__FUNC_IDDIG>;
+			bias-pull-up;
+		};
+	};
+
+	usb_id_pins_ground: usb_iddig_pull_down {
+		pins_iddig {
+			pinmux = <MT8173_PIN_16_IDDIG__FUNC_IDDIG>;
+			bias-pull-down;
+		};
+	};
 };
 
 &pwm0 {
@@ -431,12 +497,25 @@
 	status = "okay";
 };
 
+&ssusb {
+	vusb33-supply = <&mt6397_vusb_reg>;
+	vbus-supply = <&usb_p0_vbus>;
+	extcon = <&extcon_usb>;
+	dr_mode = "otg";
+	mediatek,enable-wakeup;
+	pinctrl-names = "default", "id_float", "id_ground";
+	pinctrl-0 = <&usb_id_pins_float>;
+	pinctrl-1 = <&usb_id_pins_float>;
+	pinctrl-2 = <&usb_id_pins_ground>;
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
 
-&usb30 {
+&usb_host {
 	vusb33-supply = <&mt6397_vusb_reg>;
 	vbus-supply = <&usb_p1_vbus>;
-	mediatek,wakeup-src = <1>;
+	status = "okay";
 };
diff --git a/src/arm64/mediatek/mt8173.dtsi b/src/arm64/mediatek/mt8173.dtsi
index 05f89c4a5413..12e702771f5c 100644
--- a/src/arm64/mediatek/mt8173.dtsi
+++ b/src/arm64/mediatek/mt8173.dtsi
@@ -26,6 +26,31 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		ovl0 = &ovl0;
+		ovl1 = &ovl1;
+		rdma0 = &rdma0;
+		rdma1 = &rdma1;
+		rdma2 = &rdma2;
+		wdma0 = &wdma0;
+		wdma1 = &wdma1;
+		color0 = &color0;
+		color1 = &color1;
+		split0 = &split0;
+		split1 = &split1;
+		dpi0 = &dpi0;
+		dsi0 = &dsi0;
+		dsi1 = &dsi1;
+		mdp_rdma0 = &mdp_rdma0;
+		mdp_rdma1 = &mdp_rdma1;
+		mdp_rsz0 = &mdp_rsz0;
+		mdp_rsz1 = &mdp_rsz1;
+		mdp_rsz2 = &mdp_rsz2;
+		mdp_wdma0 = &mdp_wdma0;
+		mdp_wrot0 = &mdp_wrot0;
+		mdp_wrot1 = &mdp_wrot1;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -168,6 +193,18 @@
 		};
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		vpu_dma_reserved: vpu_dma_mem_region {
+			compatible = "shared-dma-pool";
+			reg = <0 0xb7000000 0 0x500000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupt-parent = <&gic>;
@@ -225,6 +262,16 @@
 				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 
+			hdmi_pin: xxx {
+
+				/*hdmi htplg pin*/
+				pins1 {
+					pinmux = <MT8173_PIN_21_HTPLG__FUNC_HTPLG>;
+					input-enable;
+					bias-pull-down;
+				};
+			};
+
 			i2c0_pins_a: i2c0 {
 				pins1 {
 					pinmux = <MT8173_PIN_45_SDA0__FUNC_SDA0>,
@@ -312,6 +359,25 @@
 			clock-names = "spi", "wrap";
 		};
 
+		cec: cec@10013000 {
+			compatible = "mediatek,mt8173-cec";
+			reg = <0 0x10013000 0 0xbc>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_CEC>;
+			status = "disabled";
+		};
+
+		vpu: vpu@10020000 {
+			compatible = "mediatek,mt8173-vpu";
+			reg = <0 0x10020000 0 0x30000>,
+			      <0 0x10050000 0 0x100>;
+			reg-names = "tcm", "cfg_reg";
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_SCP_SEL>;
+			clock-names = "main";
+			memory-region = <&vpu_dma_reserved>;
+		};
+
 		sysirq: intpol-controller@10200620 {
 			compatible = "mediatek,mt8173-sysirq",
 				     "mediatek,mt6577-sysirq";
@@ -343,6 +409,39 @@
 			#clock-cells = <1>;
 		};
 
+		hdmi_phy: hdmi-phy@10209100 {
+			compatible = "mediatek,mt8173-hdmi-phy";
+			reg = <0 0x10209100 0 0x24>;
+			clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
+			clock-names = "pll_ref";
+			clock-output-names = "hdmitx_dig_cts";
+			mediatek,ibias = <0xa>;
+			mediatek,ibias_up = <0x1c>;
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		mipi_tx0: mipi-dphy@10215000 {
+			compatible = "mediatek,mt8173-mipi-tx";
+			reg = <0 0x10215000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx0_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		mipi_tx1: mipi-dphy@10216000 {
+			compatible = "mediatek,mt8173-mipi-tx";
+			reg = <0 0x10216000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx1_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@10220000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
@@ -359,6 +458,9 @@
 		auxadc: auxadc@11001000 {
 			compatible = "mediatek,mt8173-auxadc";
 			reg = <0 0x11001000 0 0x1000>;
+			clocks = <&pericfg CLK_PERI_AUXADC>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
 		};
 
 		uart0: serial@11002000 {
@@ -517,6 +619,14 @@
 			status = "disabled";
 		};
 
+		hdmiddc0: i2c@11012000 {
+			compatible = "mediatek,mt8173-hdmi-ddc";
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+			reg = <0 0x11012000 0 0x1C>;
+			clocks = <&pericfg CLK_PERI_I2C5>;
+			clock-names = "ddc-i2c";
+		};
+
 		i2c6: i2c@11013000 {
 			compatible = "mediatek,mt8173-i2c";
 			reg = <0 0x11013000 0 0x70>,
@@ -608,11 +718,14 @@
 			status = "disabled";
 		};
 
-		usb30: usb@11270000 {
-			compatible = "mediatek,mt8173-xhci";
-			reg = <0 0x11270000 0 0x1000>,
+		ssusb: usb@11271000 {
+			compatible = "mediatek,mt8173-mtu3";
+			reg = <0 0x11271000 0 0x3000>,
 			      <0 0x11280700 0 0x0100>;
-			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>;
+			phys = <&phy_port0 PHY_TYPE_USB3>,
+			       <&phy_port1 PHY_TYPE_USB2>;
 			power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
 			clocks = <&topckgen CLK_TOP_USB30_SEL>,
 				 <&pericfg CLK_PERI_USB0>,
@@ -620,10 +733,22 @@
 			clock-names = "sys_ck",
 				      "wakeup_deb_p0",
 				      "wakeup_deb_p1";
-			phys = <&phy_port0 PHY_TYPE_USB3>,
-			       <&phy_port1 PHY_TYPE_USB2>;
 			mediatek,syscon-wakeup = <&pericfg>;
-			status = "okay";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			usb_host: xhci@11270000 {
+				compatible = "mediatek,mt8173-xhci";
+				reg = <0 0x11270000 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+				power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+				clocks = <&topckgen CLK_TOP_USB30_SEL>;
+				clock-names = "sys_ck";
+				status = "disabled";
+			};
 		};
 
 		u3phy: usb-phy@11290000 {
@@ -652,9 +777,263 @@
 		mmsys: clock-controller@14000000 {
 			compatible = "mediatek,mt8173-mmsys", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 			#clock-cells = <1>;
 		};
 
+		mdp {
+			compatible = "mediatek,mt8173-mdp";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			mediatek,vpu = <&vpu>;
+
+			mdp_rdma0: rdma@14001000 {
+				compatible = "mediatek,mt8173-mdp-rdma";
+				reg = <0 0x14001000 0 0x1000>;
+				clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+					 <&mmsys CLK_MM_MUTEX_32K>;
+				power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+				iommus = <&iommu M4U_PORT_MDP_RDMA0>;
+				mediatek,larb = <&larb0>;
+			};
+
+			mdp_rdma1: rdma@14002000 {
+				compatible = "mediatek,mt8173-mdp-rdma";
+				reg = <0 0x14002000 0 0x1000>;
+				clocks = <&mmsys CLK_MM_MDP_RDMA1>,
+					 <&mmsys CLK_MM_MUTEX_32K>;
+				power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+				iommus = <&iommu M4U_PORT_MDP_RDMA1>;
+				mediatek,larb = <&larb4>;
+			};
+
+			mdp_rsz0: rsz@14003000 {
+				compatible = "mediatek,mt8173-mdp-rsz";
+				reg = <0 0x14003000 0 0x1000>;
+				clocks = <&mmsys CLK_MM_MDP_RSZ0>;
+				power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			};
+
+			mdp_rsz1: rsz@14004000 {
+				compatible = "mediatek,mt8173-mdp-rsz";
+				reg = <0 0x14004000 0 0x1000>;
+				clocks = <&mmsys CLK_MM_MDP_RSZ1>;
+				power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			};
+
+			mdp_rsz2: rsz@14005000 {
+				compatible = "mediatek,mt8173-mdp-rsz";
+				reg = <0 0x14005000 0 0x1000>;
+				clocks = <&mmsys CLK_MM_MDP_RSZ2>;
+				power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			};
+
+			mdp_wdma0: wdma@14006000 {
+				compatible = "mediatek,mt8173-mdp-wdma";
+				reg = <0 0x14006000 0 0x1000>;
+				clocks = <&mmsys CLK_MM_MDP_WDMA>;
+				power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+				iommus = <&iommu M4U_PORT_MDP_WDMA>;
+				mediatek,larb = <&larb0>;
+			};
+
+			mdp_wrot0: wrot@14007000 {
+				compatible = "mediatek,mt8173-mdp-wrot";
+				reg = <0 0x14007000 0 0x1000>;
+				clocks = <&mmsys CLK_MM_MDP_WROT0>;
+				power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+				iommus = <&iommu M4U_PORT_MDP_WROT0>;
+				mediatek,larb = <&larb0>;
+			};
+
+			mdp_wrot1: wrot@14008000 {
+				compatible = "mediatek,mt8173-mdp-wrot";
+				reg = <0 0x14008000 0 0x1000>;
+				clocks = <&mmsys CLK_MM_MDP_WROT1>;
+				power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+				iommus = <&iommu M4U_PORT_MDP_WROT1>;
+				mediatek,larb = <&larb4>;
+			};
+		};
+
+		ovl0: ovl@1400c000 {
+			compatible = "mediatek,mt8173-disp-ovl";
+			reg = <0 0x1400c000 0 0x1000>;
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_OVL0>;
+			iommus = <&iommu M4U_PORT_DISP_OVL0>;
+			mediatek,larb = <&larb0>;
+		};
+
+		ovl1: ovl@1400d000 {
+			compatible = "mediatek,mt8173-disp-ovl";
+			reg = <0 0x1400d000 0 0x1000>;
+			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_OVL1>;
+			iommus = <&iommu M4U_PORT_DISP_OVL1>;
+			mediatek,larb = <&larb4>;
+		};
+
+		rdma0: rdma@1400e000 {
+			compatible = "mediatek,mt8173-disp-rdma";
+			reg = <0 0x1400e000 0 0x1000>;
+			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+			mediatek,larb = <&larb0>;
+		};
+
+		rdma1: rdma@1400f000 {
+			compatible = "mediatek,mt8173-disp-rdma";
+			reg = <0 0x1400f000 0 0x1000>;
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
+			mediatek,larb = <&larb4>;
+		};
+
+		rdma2: rdma@14010000 {
+			compatible = "mediatek,mt8173-disp-rdma";
+			reg = <0 0x14010000 0 0x1000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA2>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA2>;
+			mediatek,larb = <&larb4>;
+		};
+
+		wdma0: wdma@14011000 {
+			compatible = "mediatek,mt8173-disp-wdma";
+			reg = <0 0x14011000 0 0x1000>;
+			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_WDMA0>;
+			iommus = <&iommu M4U_PORT_DISP_WDMA0>;
+			mediatek,larb = <&larb0>;
+		};
+
+		wdma1: wdma@14012000 {
+			compatible = "mediatek,mt8173-disp-wdma";
+			reg = <0 0x14012000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_WDMA1>;
+			iommus = <&iommu M4U_PORT_DISP_WDMA1>;
+			mediatek,larb = <&larb4>;
+		};
+
+		color0: color@14013000 {
+			compatible = "mediatek,mt8173-disp-color";
+			reg = <0 0x14013000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+		};
+
+		color1: color@14014000 {
+			compatible = "mediatek,mt8173-disp-color";
+			reg = <0 0x14014000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_COLOR1>;
+		};
+
+		aal@14015000 {
+			compatible = "mediatek,mt8173-disp-aal";
+			reg = <0 0x14015000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_AAL>;
+		};
+
+		gamma@14016000 {
+			compatible = "mediatek,mt8173-disp-gamma";
+			reg = <0 0x14016000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_GAMMA>;
+		};
+
+		merge@14017000 {
+			compatible = "mediatek,mt8173-disp-merge";
+			reg = <0 0x14017000 0 0x1000>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_MERGE>;
+		};
+
+		split0: split@14018000 {
+			compatible = "mediatek,mt8173-disp-split";
+			reg = <0 0x14018000 0 0x1000>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_SPLIT0>;
+		};
+
+		split1: split@14019000 {
+			compatible = "mediatek,mt8173-disp-split";
+			reg = <0 0x14019000 0 0x1000>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_SPLIT1>;
+		};
+
+		ufoe@1401a000 {
+			compatible = "mediatek,mt8173-disp-ufoe";
+			reg = <0 0x1401a000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_UFOE>;
+		};
+
+		dsi0: dsi@1401b000 {
+			compatible = "mediatek,mt8173-dsi";
+			reg = <0 0x1401b000 0 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DSI0_ENGINE>,
+				 <&mmsys CLK_MM_DSI0_DIGITAL>,
+				 <&mipi_tx0>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx0>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
+		dsi1: dsi@1401c000 {
+			compatible = "mediatek,mt8173-dsi";
+			reg = <0 0x1401c000 0 0x1000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DSI1_ENGINE>,
+				 <&mmsys CLK_MM_DSI1_DIGITAL>,
+				 <&mipi_tx1>;
+			clock-names = "engine", "digital", "hs";
+			phy = <&mipi_tx1>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
+		dpi0: dpi@1401d000 {
+			compatible = "mediatek,mt8173-dpi";
+			reg = <0 0x1401d000 0 0x1000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DPI_PIXEL>,
+				 <&mmsys CLK_MM_DPI_ENGINE>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL>;
+			clock-names = "pixel", "engine", "pll";
+			status = "disabled";
+
+			port {
+				dpi0_out: endpoint {
+					remote-endpoint = <&hdmi0_in>;
+				};
+			};
+		};
+
 		pwm0: pwm@1401e000 {
 			compatible = "mediatek,mt8173-disp-pwm",
 				     "mediatek,mt6595-disp-pwm";
@@ -677,6 +1056,14 @@
 			status = "disabled";
 		};
 
+		mutex: mutex@14020000 {
+			compatible = "mediatek,mt8173-disp-mutex";
+			reg = <0 0x14020000 0 0x1000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_MUTEX_32K>;
+		};
+
 		larb0: larb@14021000 {
 			compatible = "mediatek,mt8173-smi-larb";
 			reg = <0 0x14021000 0 0x1000>;
@@ -696,6 +1083,44 @@
 			clock-names = "apb", "smi";
 		};
 
+		od@14023000 {
+			compatible = "mediatek,mt8173-disp-od";
+			reg = <0 0x14023000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_OD>;
+		};
+
+		hdmi0: hdmi@14025000 {
+			compatible = "mediatek,mt8173-hdmi";
+			reg = <0 0x14025000 0 0x400>;
+			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&mmsys CLK_MM_HDMI_PIXEL>,
+				 <&mmsys CLK_MM_HDMI_PLLCK>,
+				 <&mmsys CLK_MM_HDMI_AUDIO>,
+				 <&mmsys CLK_MM_HDMI_SPDIF>;
+			clock-names = "pixel", "pll", "bclk", "spdif";
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_pin>;
+			phys = <&hdmi_phy>;
+			phy-names = "hdmi";
+			mediatek,syscon-hdmi = <&mmsys 0x900>;
+			assigned-clocks = <&topckgen CLK_TOP_HDMI_SEL>;
+			assigned-clock-parents = <&hdmi_phy>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					hdmi0_in: endpoint {
+						remote-endpoint = <&dpi0_out>;
+					};
+				};
+			};
+		};
+
 		larb4: larb@14027000 {
 			compatible = "mediatek,mt8173-smi-larb";
 			reg = <0 0x14027000 0 0x1000>;
@@ -728,6 +1153,50 @@
 			#clock-cells = <1>;
 		};
 
+		vcodec_dec: vcodec@16000000 {
+			compatible = "mediatek,mt8173-vcodec-dec";
+			reg = <0 0x16000000 0 0x100>,	/* VDEC_SYS */
+			      <0 0x16020000 0 0x1000>,	/* VDEC_MISC */
+			      <0 0x16021000 0 0x800>,	/* VDEC_LD */
+			      <0 0x16021800 0 0x800>,	/* VDEC_TOP */
+			      <0 0x16022000 0 0x1000>,	/* VDEC_CM */
+			      <0 0x16023000 0 0x1000>,	/* VDEC_AD */
+			      <0 0x16024000 0 0x1000>,	/* VDEC_AV */
+			      <0 0x16025000 0 0x1000>,	/* VDEC_PP */
+			      <0 0x16026800 0 0x800>,	/* VDEC_HWD */
+			      <0 0x16027000 0 0x800>,	/* VDEC_HWQ */
+			      <0 0x16027800 0 0x800>,	/* VDEC_HWB */
+			      <0 0x16028400 0 0x400>;	/* VDEC_HWG */
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
+			mediatek,larb = <&larb1>;
+			iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_UFO_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>;
+			mediatek,vpu = <&vpu>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
+			clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>,
+				 <&topckgen CLK_TOP_UNIVPLL_D2>,
+				 <&topckgen CLK_TOP_CCI400_SEL>,
+				 <&topckgen CLK_TOP_VDEC_SEL>,
+				 <&topckgen CLK_TOP_VCODECPLL>,
+				 <&apmixedsys CLK_APMIXED_VENCPLL>,
+				 <&topckgen CLK_TOP_VENC_LT_SEL>,
+				 <&topckgen CLK_TOP_VCODECPLL_370P5>;
+			clock-names = "vcodecpll",
+				      "univpll_d2",
+				      "clk_cci400_sel",
+				      "vdec_sel",
+				      "vdecpll",
+				      "vencpll",
+				      "venc_lt_sel",
+				      "vdec_bus_clk_src";
+		};
+
 		larb1: larb@16010000 {
 			compatible = "mediatek,mt8173-smi-larb";
 			reg = <0 0x16010000 0 0x1000>;
@@ -754,6 +1223,45 @@
 			clock-names = "apb", "smi";
 		};
 
+		vcodec_enc: vcodec@18002000 {
+			compatible = "mediatek,mt8173-vcodec-enc";
+			reg = <0 0x18002000 0 0x1000>,	/* VENC_SYS */
+			      <0 0x19002000 0 0x1000>;	/* VENC_LT_SYS */
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
+			mediatek,larb = <&larb3>,
+					<&larb5>;
+			iommus = <&iommu M4U_PORT_VENC_RCPU>,
+				 <&iommu M4U_PORT_VENC_REC>,
+				 <&iommu M4U_PORT_VENC_BSDMA>,
+				 <&iommu M4U_PORT_VENC_SV_COMV>,
+				 <&iommu M4U_PORT_VENC_RD_COMV>,
+				 <&iommu M4U_PORT_VENC_CUR_LUMA>,
+				 <&iommu M4U_PORT_VENC_CUR_CHROMA>,
+				 <&iommu M4U_PORT_VENC_REF_LUMA>,
+				 <&iommu M4U_PORT_VENC_REF_CHROMA>,
+				 <&iommu M4U_PORT_VENC_NBM_RDMA>,
+				 <&iommu M4U_PORT_VENC_NBM_WDMA>,
+				 <&iommu M4U_PORT_VENC_RCPU_SET2>,
+				 <&iommu M4U_PORT_VENC_REC_FRM_SET2>,
+				 <&iommu M4U_PORT_VENC_BSDMA_SET2>,
+				 <&iommu M4U_PORT_VENC_SV_COMA_SET2>,
+				 <&iommu M4U_PORT_VENC_RD_COMA_SET2>,
+				 <&iommu M4U_PORT_VENC_CUR_LUMA_SET2>,
+				 <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
+				 <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
+				 <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
+			mediatek,vpu = <&vpu>;
+			clocks = <&topckgen CLK_TOP_VENCPLL_D2>,
+				 <&topckgen CLK_TOP_VENC_SEL>,
+				 <&topckgen CLK_TOP_UNIVPLL1_D2>,
+				 <&topckgen CLK_TOP_VENC_LT_SEL>;
+			clock-names = "venc_sel_src",
+				      "venc_sel",
+				      "venc_lt_sel_src",
+				      "venc_lt_sel";
+		};
+
 		vencltsys: clock-controller@19000000 {
 			compatible = "mediatek,mt8173-vencltsys", "syscon";
 			reg = <0 0x19000000 0 0x1000>;
diff --git a/src/arm64/nvidia/tegra132.dtsi b/src/arm64/nvidia/tegra132.dtsi
index 2013f8916084..3f3a46a4bd01 100644
--- a/src/arm64/nvidia/tegra132.dtsi
+++ b/src/arm64/nvidia/tegra132.dtsi
@@ -4,6 +4,7 @@
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
 
 / {
 	compatible = "nvidia,tegra132", "nvidia,tegra124";
@@ -727,8 +728,10 @@
 	};
 
 	soctherm: thermal-sensor@700e2000 {
-		compatible = "nvidia,tegra124-soctherm";
-		reg = <0x0 0x700e2000 0x0 0x1000>;
+		compatible = "nvidia,tegra132-soctherm";
+		reg = <0x0 0x700e2000 0x0 0x600 /* 0: SOC_THERM reg_base */
+			0x0 0x70040000 0x0 0x200>; /* 2: CCROC reg_base */
+		reg-names = "soctherm-reg", "ccroc-reg";
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
 			<&tegra_car TEGRA124_CLK_SOC_THERM>;
@@ -736,6 +739,118 @@
 		resets = <&tegra_car 78>;
 		reset-names = "soctherm";
 		#thermal-sensor-cells = <1>;
+
+		throttle-cfgs {
+			throttle_heavy: heavy {
+				nvidia,priority = <100>;
+				nvidia,cpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>;
+
+				#cooling-cells = <2>;
+			};
+		};
+	};
+
+	thermal-zones {
+		cpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+			trips {
+				cpu_shutdown_trip {
+					temperature = <105000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				cpu_throttle_trip: throttle-trip {
+					temperature = <102000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+		mem {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+			trips {
+				mem_shutdown_trip {
+					temperature = <101000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
+		gpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+			trips {
+				gpu_shutdown_trip {
+					temperature = <101000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				gpu_throttle_trip: throttle-trip {
+					temperature = <99000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+		pllx {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+			trips {
+				pllx_shutdown_trip {
+					temperature = <105000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
 	};
 
 	ahub@70300000 {
diff --git a/src/arm64/nvidia/tegra186-p2771-0000.dts b/src/arm64/nvidia/tegra186-p2771-0000.dts
new file mode 100644
index 000000000000..0d3c0996d832
--- /dev/null
+++ b/src/arm64/nvidia/tegra186-p2771-0000.dts
@@ -0,0 +1,8 @@
+/dts-v1/;
+
+#include "tegra186-p3310.dtsi"
+
+/ {
+	model = "NVIDIA Tegra186 P2771-0000 Development Board";
+	compatible = "nvidia,p2771-0000", "nvidia,tegra186";
+};
diff --git a/src/arm64/nvidia/tegra186-p3310.dtsi b/src/arm64/nvidia/tegra186-p3310.dtsi
new file mode 100644
index 000000000000..1abe2eceb3d1
--- /dev/null
+++ b/src/arm64/nvidia/tegra186-p3310.dtsi
@@ -0,0 +1,64 @@
+#include "tegra186.dtsi"
+
+/ {
+	model = "NVIDIA Tegra186 P3310 Processor Module";
+	compatible = "nvidia,p3310", "nvidia,tegra186";
+
+	aliases {
+		serial0 = &uarta;
+	};
+
+	chosen {
+		bootargs = "earlycon console=ttyS0,115200n8";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x2 0x00000000>;
+	};
+
+	serial@3100000 {
+		status = "okay";
+	};
+
+	hsp@3c00000 {
+		status = "okay";
+	};
+
+	cpus {
+		cpu@0 {
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			enable-method = "psci";
+		};
+
+		cpu@4 {
+			enable-method = "psci";
+		};
+
+		cpu@5 {
+			enable-method = "psci";
+		};
+	};
+
+	bpmp {
+		status = "okay";
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		status = "okay";
+		method = "smc";
+	};
+};
diff --git a/src/arm64/nvidia/tegra186.dtsi b/src/arm64/nvidia/tegra186.dtsi
new file mode 100644
index 000000000000..a918e10240fd
--- /dev/null
+++ b/src/arm64/nvidia/tegra186.dtsi
@@ -0,0 +1,398 @@
+#include <dt-bindings/gpio/tegra186-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "nvidia,tegra186";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	gpio: gpio@2200000 {
+		compatible = "nvidia,tegra186-gpio";
+		reg-names = "security", "gpio";
+		reg = <0x0 0x2200000 0x0 0x10000>,
+		      <0x0 0x2210000 0x0 0x10000>;
+		interrupts = <GIC_SPI  47 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI  50 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI  53 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI  56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI  59 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	uarta: serial@3100000 {
+		compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x03100000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp 55>;
+		clock-names = "serial";
+		resets = <&bpmp 47>;
+		reset-names = "serial";
+		status = "disabled";
+	};
+
+	uartb: serial@3110000 {
+		compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x03110000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp 56>;
+		clock-names = "serial";
+		resets = <&bpmp 48>;
+		reset-names = "serial";
+		status = "disabled";
+	};
+
+	uartd: serial@3130000 {
+		compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x03130000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp 77>;
+		clock-names = "serial";
+		resets = <&bpmp 50>;
+		reset-names = "serial";
+		status = "disabled";
+	};
+
+	uarte: serial@3140000 {
+		compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x03140000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp 194>;
+		clock-names = "serial";
+		resets = <&bpmp 132>;
+		reset-names = "serial";
+		status = "disabled";
+	};
+
+	uartf: serial@3150000 {
+		compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x03150000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp 195>;
+		clock-names = "serial";
+		resets = <&bpmp 111>;
+		reset-names = "serial";
+		status = "disabled";
+	};
+
+	gen1_i2c: i2c@3160000 {
+		compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x03160000 0x0 0x10000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp 47>;
+		clock-names = "div-clk";
+		resets = <&bpmp 19>;
+		reset-names = "i2c";
+		status = "disabled";
+	};
+
+	cam_i2c: i2c@3180000 {
+		compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x03180000 0x0 0x10000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp 75>;
+		clock-names = "div-clk";
+		resets = <&bpmp 21>;
+		reset-names = "i2c";
+		status = "disabled";
+	};
+
+	/* shares pads with dpaux1 */
+	dp_aux_ch1_i2c: i2c@3190000 {
+		compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x03190000 0x0 0x10000>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp 86>;
+		clock-names = "div-clk";
+		resets = <&bpmp 22>;
+		reset-names = "i2c";
+		status = "disabled";
+	};
+
+	/* controlled by BPMP, should not be enabled */
+	pwr_i2c: i2c@31a0000 {
+		compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x031a0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp 48>;
+		clock-names = "div-clk";
+		resets = <&bpmp 23>;
+		reset-names = "i2c";
+		status = "disabled";
+	};
+
+	/* shares pads with dpaux0 */
+	dp_aux_ch0_i2c: i2c@31b0000 {
+		compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x031b0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp 125>;
+		clock-names = "div-clk";
+		resets = <&bpmp 24>;
+		reset-names = "i2c";
+		status = "disabled";
+	};
+
+	gen7_i2c: i2c@31c0000 {
+		compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x031c0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp 182>;
+		clock-names = "div-clk";
+		resets = <&bpmp 81>;
+		reset-names = "i2c";
+		status = "disabled";
+	};
+
+	gen9_i2c: i2c@31e0000 {
+		compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x031e0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp 183>;
+		clock-names = "div-clk";
+		resets = <&bpmp 83>;
+		reset-names = "i2c";
+		status = "disabled";
+	};
+
+	sdmmc1: sdhci@3400000 {
+		compatible = "nvidia,tegra186-sdhci";
+		reg = <0x0 0x03400000 0x0 0x10000>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp 52>;
+		clock-names = "sdhci";
+		resets = <&bpmp 33>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdmmc2: sdhci@3420000 {
+		compatible = "nvidia,tegra186-sdhci";
+		reg = <0x0 0x03420000 0x0 0x10000>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp 53>;
+		clock-names = "sdhci";
+		resets = <&bpmp 34>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdmmc3: sdhci@3440000 {
+		compatible = "nvidia,tegra186-sdhci";
+		reg = <0x0 0x03440000 0x0 0x10000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp 76>;
+		clock-names = "sdhci";
+		resets = <&bpmp 35>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdmmc4: sdhci@3460000 {
+		compatible = "nvidia,tegra186-sdhci";
+		reg = <0x0 0x03460000 0x0 0x10000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp 54>;
+		clock-names = "sdhci";
+		resets = <&bpmp 36>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@3881000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x03881000 0x0 0x1000>,
+		      <0x0 0x03882000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-parent = <&gic>;
+	};
+
+	hsp_top0: hsp@3c00000 {
+		compatible = "nvidia,tegra186-hsp";
+		reg = <0x0 0x03c00000 0x0 0xa0000>;
+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "doorbell";
+		#mbox-cells = <2>;
+		status = "disabled";
+	};
+
+	gen2_i2c: i2c@c240000 {
+		compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x0c240000 0x0 0x10000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp 218>;
+		clock-names = "div-clk";
+		resets = <&bpmp 20>;
+		reset-names = "i2c";
+		status = "disabled";
+	};
+
+	gen8_i2c: i2c@c250000 {
+		compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x0c250000 0x0 0x10000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp 219>;
+		clock-names = "div-clk";
+		resets = <&bpmp 82>;
+		reset-names = "i2c";
+		status = "disabled";
+	};
+
+	uartc: serial@c280000 {
+		compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x0c280000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp 215>;
+		clock-names = "serial";
+		resets = <&bpmp 49>;
+		reset-names = "serial";
+		status = "disabled";
+	};
+
+	uartg: serial@c290000 {
+		compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x0c290000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp 216>;
+		clock-names = "serial";
+		resets = <&bpmp 112>;
+		reset-names = "serial";
+		status = "disabled";
+	};
+
+	gpio_aon: gpio@c2f0000 {
+		compatible = "nvidia,tegra186-gpio-aon";
+		reg-names = "security", "gpio";
+		reg = <0x0 0xc2f0000 0x0 0x1000>,
+		      <0x0 0xc2f1000 0x0 0x1000>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sysram@30000000 {
+		compatible = "nvidia,tegra186-sysram", "mmio-sram";
+		reg = <0x0 0x30000000 0x0 0x50000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0x0 0x0 0x30000000 0x0 0x50000>;
+
+		cpu_bpmp_tx: shmem@4e000 {
+			compatible = "nvidia,tegra186-bpmp-shmem";
+			reg = <0x0 0x4e000 0x0 0x1000>;
+			label = "cpu-bpmp-tx";
+			pool;
+		};
+
+		cpu_bpmp_rx: shmem@4f000 {
+			compatible = "nvidia,tegra186-bpmp-shmem";
+			reg = <0x0 0x4f000 0x0 0x1000>;
+			label = "cpu-bpmp-rx";
+			pool;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "nvidia,tegra186-denver", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x000>;
+		};
+
+		cpu@1 {
+			compatible = "nvidia,tegra186-denver", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x001>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a57", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x100>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a57", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x101>;
+		};
+
+		cpu@4 {
+			compatible = "arm,cortex-a57", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x102>;
+		};
+
+		cpu@5 {
+			compatible = "arm,cortex-a57", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x103>;
+		};
+	};
+
+	bpmp: bpmp {
+		compatible = "nvidia,tegra186-bpmp";
+		mboxes = <&hsp_top0 0 19>;
+		shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+
+		bpmp_i2c: i2c {
+			compatible = "nvidia,tegra186-bpmp-i2c";
+			nvidia,bpmp-bus-id = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&gic>;
+	};
+};
diff --git a/src/arm64/nvidia/tegra210-p2180.dtsi b/src/arm64/nvidia/tegra210-p2180.dtsi
index 316c92c03821..906fb836d241 100644
--- a/src/arm64/nvidia/tegra210-p2180.dtsi
+++ b/src/arm64/nvidia/tegra210-p2180.dtsi
@@ -1,3 +1,5 @@
+#include <dt-bindings/mfd/max77620.h>
+
 #include "tegra210.dtsi"
 
 / {
@@ -5,20 +7,271 @@
 	compatible = "nvidia,p2180", "nvidia,tegra210";
 
 	aliases {
+		rtc0 = "/i2c@7000d000/pmic@3c";
 		rtc1 = "/rtc@7000e000";
 		serial0 = &uarta;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x1 0x0>;
 	};
 
+	gpu@57000000 {
+		vdd-supply = <&vdd_gpu>;
+	};
+
 	/* debug port */
 	serial@70006000 {
 		status = "okay";
 	};
 
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@3c {
+			compatible = "maxim,max77620";
+			reg = <0x3c>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77620_default>;
+
+			max77620_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+				};
+
+				gpio1 {
+					pins = "gpio1";
+					function = "fps-out";
+					drive-push-pull = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <7>;
+					maxim,active-fps-power-down-slot = <0>;
+				};
+
+				gpio2_3 {
+					pins = "gpio2", "gpio3";
+					function = "fps-out";
+					drive-open-drain = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				gpio4 {
+					pins = "gpio4";
+					function = "32k-out1";
+				};
+
+				gpio5_6_7 {
+					pins = "gpio5", "gpio6", "gpio7";
+					function = "gpio";
+					drive-push-pull = <1>;
+				};
+			};
+
+			fps {
+				fps0 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+					maxim,suspend-fps-time-period-us = <1280>;
+				};
+
+				fps1 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+					maxim,suspend-fps-time-period-us = <1280>;
+				};
+
+				fps2 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+			};
+
+			regulators {
+				in-ldo0-1-supply = <&vdd_pre>;
+				in-ldo7-8-supply = <&vdd_pre>;
+				in-sd3-supply = <&vdd_5v0_sys>;
+
+				vdd_soc: sd0 {
+					regulator-name = "VDD_SOC";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <146>;
+					regulator-ramp-delay = <27500>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				vdd_ddr: sd1 {
+					regulator-name = "VDD_DDR_1V1_PMIC";
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <130>;
+					regulator-ramp-delay = <27500>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				vdd_pre: sd2 {
+					regulator-name = "VDD_PRE_REG_1V35";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+
+					regulator-enable-ramp-delay = <176>;
+					regulator-ramp-delay = <27500>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				vdd_1v8: sd3 {
+					regulator-name = "VDD_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <242>;
+					regulator-ramp-delay = <27500>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				vdd_sys_1v2: ldo0 {
+					regulator-name = "AVDD_SYS_1V2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <26>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_pex_1v05: ldo1 {
+					regulator-name = "VDD_PEX_1V05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				vddio_sdmmc: ldo2 {
+					regulator-name = "VDDIO_SDMMC";
+					/*
+					 * Technically this supply should have
+					 * a supported range from 1.8 - 3.3 V.
+					 * However, that would cause the SDHCI
+					 * driver to request 2.7 V upon access
+					 * and that in turn will cause traffic
+					 * to be broken. Leave it at 3.3 V for
+					 * now.
+					 */
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <62>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_cam_hv: ldo3 {
+					regulator-name = "VDD_CAM_HV";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+
+					regulator-enable-ramp-delay = <50>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_rtc: ldo4 {
+					regulator-name = "VDD_RTC";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <850000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				vdd_ts_hv: ldo5 {
+					regulator-name = "VDD_TS_HV";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+
+					regulator-enable-ramp-delay = <62>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_ts: ldo6 {
+					regulator-name = "VDD_TS_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+
+					regulator-enable-ramp-delay = <36>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <7>;
+					maxim,active-fps-power-down-slot = <0>;
+				};
+
+				avdd_1v05_pll: ldo7 {
+					regulator-name = "AVDD_1V05_PLL";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <24>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				avdd_1v05: ldo8 {
+					regulator-name = "AVDD_SATA_HDMI_DP_1V05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+			};
+		};
+	};
+
 	pmc@7000e400 {
 		nvidia,invert-interrupt;
 	};
@@ -42,4 +295,18 @@
 			clock-frequency = <32768>;
 		};
 	};
+
+	regulators {
+		vdd_gpu: regulator@100 {
+			compatible = "pwm-regulator";
+			reg = <100>;
+			pwms = <&pwm 1 4880>;
+			regulator-name = "VDD_GPU";
+			regulator-min-microvolt = <710000>;
+			regulator-max-microvolt = <1320000>;
+			enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
+			regulator-ramp-delay = <80>;
+			regulator-enable-ramp-delay = <1000>;
+		};
+	};
 };
diff --git a/src/arm64/nvidia/tegra210-p2371-2180.dts b/src/arm64/nvidia/tegra210-p2371-2180.dts
index 683b339a980c..4c1ea7a08d43 100644
--- a/src/arm64/nvidia/tegra210-p2371-2180.dts
+++ b/src/arm64/nvidia/tegra210-p2371-2180.dts
@@ -6,4 +6,75 @@
 / {
 	model = "NVIDIA Jetson TX1 Developer Kit";
 	compatible = "nvidia,p2371-2180", "nvidia,tegra210";
+
+	pcie-controller@01003000 {
+		status = "okay";
+
+		avdd-pll-uerefe-supply = <&avdd_1v05_pll>;
+		hvddio-pex-supply = <&vdd_1v8>;
+		dvddio-pex-supply = <&vdd_pex_1v05>;
+		dvdd-pex-pll-supply = <&vdd_pex_1v05>;
+		hvdd-pex-pll-e-supply = <&vdd_1v8>;
+		vddio-pex-ctl-supply = <&vdd_1v8>;
+
+		pci@1,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>;
+			phy-names = "pcie-0", "pcie-1", "pcie-2", "pcie-3";
+			status = "okay";
+		};
+
+		pci@2,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
+			phy-names = "pcie-0";
+			status = "okay";
+		};
+	};
+
+	host1x@50000000 {
+		dsi@54300000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&vdd_dsi_csi>;
+
+			panel@0 {
+				compatible = "auo,b080uan01";
+				reg = <0>;
+
+				enable-gpios = <&gpio TEGRA_GPIO(V, 2)
+						GPIO_ACTIVE_HIGH>;
+				power-supply = <&vdd_5v0_io>;
+				backlight = <&backlight>;
+			};
+		};
+	};
+
+	i2c@7000c400 {
+		backlight: backlight@2c {
+			compatible = "ti,lp8557";
+			reg = <0x2c>;
+
+			dev-ctrl = /bits/ 8 <0x80>;
+			init-brt = /bits/ 8 <0xff>;
+
+			pwm-period = <29334>;
+
+			pwms = <&pwm 0 29334>;
+			pwm-names = "lp8557";
+
+			/* 3 LED string */
+			rom_14h {
+				rom-addr = /bits/ 8 <0x14>;
+				rom-val = /bits/ 8 <0x87>;
+			};
+
+			/* boost frequency 1 MHz */
+			rom_13h {
+				rom-addr = /bits/ 8 <0x13>;
+				rom-val = /bits/ 8 <0x01>;
+			};
+		};
+	};
 };
diff --git a/src/arm64/nvidia/tegra210-p2597.dtsi b/src/arm64/nvidia/tegra210-p2597.dtsi
index a2480c0c7e72..e5fc67bf46c2 100644
--- a/src/arm64/nvidia/tegra210-p2597.dtsi
+++ b/src/arm64/nvidia/tegra210-p2597.dtsi
@@ -4,6 +4,24 @@
 	model = "NVIDIA Tegra210 P2597 I/O board";
 	compatible = "nvidia,p2597", "nvidia,tegra210";
 
+	host1x@50000000 {
+		dpaux@54040000 {
+			status = "okay";
+		};
+
+		sor@54580000 {
+			status = "okay";
+
+			avdd-io-supply = <&avdd_1v05>;
+			vdd-pll-supply = <&vdd_1v8>;
+			hdmi-supply = <&vdd_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(CC, 1)
+					   GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	pinmux: pinmux@700008d4 {
 		pinctrl-names = "boot";
 		pinctrl-0 = <&state_boot>;
@@ -1261,6 +1279,169 @@
 		};
 	};
 
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		exp1: gpio@74 {
+			compatible = "ti,tca9539";
+			reg = <0x74>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+	};
+
+	/* HDMI DDC */
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-3}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-6}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-5}>;
+		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3", "usb3-0",
+			    "usb3-1";
+
+		dvddio-pex-supply = <&vdd_pex_1v05>;
+		hvddio-pex-supply = <&vdd_1v8>;
+		avdd-usb-supply = <&vdd_3v3_sys>;
+		/* XXX what are these? */
+		avdd-pll-utmip-supply = <&vdd_1v8>;
+		avdd-pll-uerefe-supply = <&vdd_pex_1v05>;
+		dvdd-usb-ss-pll-supply = <&vdd_pex_1v05>;
+		hvdd-usb-ss-pll-e-supply = <&vdd_1v8>;
+
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		status = "okay";
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-3 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						nvidia,function = "pcie-x1";
+						status = "okay";
+					};
+
+					pcie-1 {
+						nvidia,function = "pcie-x4";
+						status = "okay";
+					};
+
+					pcie-2 {
+						nvidia,function = "pcie-x4";
+						status = "okay";
+					};
+
+					pcie-3 {
+						nvidia,function = "pcie-x4";
+						status = "okay";
+					};
+
+					pcie-4 {
+						nvidia,function = "pcie-x4";
+						status = "okay";
+					};
+
+					pcie-5 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-6 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+				};
+			};
+
+			sata {
+				status = "okay";
+
+				lanes {
+					sata-0 {
+						nvidia,function = "sata";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "okay";
+				mode = "otg";
+			};
+
+			usb2-1 {
+				status = "okay";
+				vbus-supply = <&vdd_5v0_rtl>;
+				mode = "host";
+			};
+
+			usb2-2 {
+				status = "okay";
+				vbus-supply = <&vdd_usb_vbus>;
+				mode = "host";
+			};
+
+			usb2-3 {
+				status = "okay";
+				mode = "host";
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <1>;
+				status = "okay";
+			};
+
+			usb3-1 {
+				nvidia,usb2-companion = <2>;
+				status = "okay";
+			};
+		};
+	};
+
 	/* MMC/SD */
 	sdhci@700b0000 {
 		status = "okay";
@@ -1268,6 +1449,144 @@
 		no-1-8-v;
 
 		cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
+
+		vqmmc-supply = <&vddio_sdmmc>;
+		vmmc-supply = <&vdd_3v3_sd>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_sys_mux: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "VDD_SYS_MUX";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vdd_5v0_sys: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "VDD_5V0_SYS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_sys_mux>;
+		};
+
+		vdd_3v3_sys: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "VDD_3V3_SYS";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_sys_mux>;
+
+			regulator-enable-ramp-delay = <160>;
+			regulator-disable-ramp-delay = <10000>;
+		};
+
+		vdd_5v0_io: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "VDD_5V0_IO_SYS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vdd_3v3_sd: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "VDD_3V3_SD";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+
+			regulator-enable-ramp-delay = <472>;
+			regulator-disable-ramp-delay = <4880>;
+		};
+
+		vdd_dsi_csi: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "AVDD_DSI_CSI_1V2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			vin-supply = <&vdd_sys_1v2>;
+		};
+
+		vdd_3v3_dis: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "VDD_DIS_3V3_LCD";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+		};
+
+		vdd_1v8_dis: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			regulator-name = "VDD_LCD_1V8_DIS";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			gpio = <&exp1 14 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_1v8>;
+		};
+
+		vdd_5v0_rtl: regulator@8 {
+			compatible = "regulator-fixed";
+			reg = <8>;
+			regulator-name = "RTL_5V";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_usb_vbus: regulator@9 {
+			compatible = "regulator-fixed";
+			reg = <9>;
+			regulator-name = "USB_VBUS_EN1";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_hdmi: regulator@10 {
+			compatible = "regulator-fixed";
+			reg = <10>;
+			regulator-name = "VDD_HDMI_5V0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&exp1 12 GPIO_ACTIVE_LOW>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_sys>;
+		};
 	};
 
 	gpio-keys {
diff --git a/src/arm64/nvidia/tegra210-smaug.dts b/src/arm64/nvidia/tegra210-smaug.dts
index 4d89f4e02d98..7703227f5d1a 100644
--- a/src/arm64/nvidia/tegra210-smaug.dts
+++ b/src/arm64/nvidia/tegra210-smaug.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/max77620.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 
 #include "tegra210.dtsi"
@@ -10,7 +11,8 @@
 	compatible = "google,smaug-rev8", "google,smaug-rev7",
 		     "google,smaug-rev6", "google,smaug-rev5",
 		     "google,smaug-rev4", "google,smaug-rev3",
-		     "google,smaug-rev1", "google,smaug", "nvidia,tegra210";
+		     "google,smaug-rev2", "google,smaug-rev1",
+		     "google,smaug", "nvidia,tegra210";
 
 	aliases {
 		serial0 = &uarta;
@@ -26,6 +28,12 @@
 		reg = <0x0 0x80000000 0x0 0xc0000000>;
 	};
 
+	host1x@50000000 {
+		dpaux: dpaux@545c0000 {
+			status = "okay";
+		};
+	};
+
 	pinmux: pinmux@700008d4 {
 		pinctrl-names = "boot";
 		pinctrl-0 = <&state_boot>;
@@ -1327,6 +1335,274 @@
 		};
 	};
 
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <1000000>;
+
+		max77620: max77620@3c {
+			compatible = "maxim,max77620";
+			reg = <0x3c>;
+			interrupts = <0 86 IRQ_TYPE_NONE>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77620_default>;
+
+			max77620_default: pinmux@0 {
+				pin_gpio {
+					pins = "gpio0", "gpio1", "gpio2", "gpio7";
+					function = "gpio";
+				};
+
+				/*
+				 * GPIO3 is used to en_pp3300, and it is part of power
+				 * sequence, So it must be sequenced up (automatically
+				 * set by OTP) and down properly.
+				 */
+				pin_gpio3 {
+					pins = "gpio3";
+					function = "fps-out";
+					drive-open-drain = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <4>;
+					maxim,active-fps-power-down-slot = <2>;
+				};
+
+				pin_gpio5_6 {
+					pins = "gpio5", "gpio6";
+					function = "gpio";
+					drive-push-pull = <1>;
+				};
+
+				pin_32k {
+					pins = "gpio4";
+					function = "32k-out1";
+				};
+			};
+
+			fps {
+				fps0 {
+					maxim,shutdown-fps-time-period-us = <5120>;
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+
+				fps1 {
+					maxim,shutdown-fps-time-period-us = <5120>;
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+					maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
+				};
+
+				fps2 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+			};
+
+			regulators {
+				in-ldo0-1-supply = <&pp1350>;
+				in-ldo2-supply = <&pp3300>;
+				in-ldo3-5-supply = <&pp3300>;
+				in-ldo7-8-supply = <&pp1350>;
+
+				ppvar_soc: sd0 {
+					regulator-name = "PPVAR_SOC";
+					regulator-min-microvolt = <825000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-always-on;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					maxim,active-fps-power-up-slot = <1>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp1100_sd1: sd1 {
+					regulator-name = "PP1100";
+					regulator-min-microvolt = <1125000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-always-on;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <5>;
+					maxim,active-fps-power-down-slot = <1>;
+				};
+
+				pp1350: sd2 {
+					regulator-name = "PP1350";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <2>;
+					maxim,active-fps-power-down-slot = <5>;
+				};
+
+				pp1800: sd3 {
+					regulator-name = "PP1800";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <3>;
+					maxim,active-fps-power-down-slot = <3>;
+				};
+
+				pp1200_avdd: ldo0 {
+					regulator-name = "PP1200_AVDD";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-enable-ramp-delay = <26>;
+					regulator-ramp-delay = <100000>;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp1200_rcam: ldo1 {
+					regulator-name = "PP1200_RCAM";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp_ldo2: ldo2 {
+					regulator-name = "PP_LDO2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-enable-ramp-delay = <62>;
+					regulator-ramp-delay = <11000>;
+					regulator-always-on;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp2800l_rcam: ldo3 {
+					regulator-name = "PP2800L_RCAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-enable-ramp-delay = <50>;
+					regulator-ramp-delay = <100000>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp100_soc_rtc: ldo4 {
+					regulator-name = "PP1100_SOC_RTC";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <850000>;
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+					regulator-always-on; /* Check this */
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <1>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp2800l_fcam: ldo5 {
+					regulator-name = "PP2800L_FCAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-enable-ramp-delay = <62>;
+					regulator-ramp-delay = <100000>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				ldo6 {
+					/* Unused. */
+					regulator-name = "PP_LDO6";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-enable-ramp-delay = <36>;
+					regulator-ramp-delay = <100000>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp1050_avdd: ldo7 {
+					regulator-name = "PP1050_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-enable-ramp-delay = <24>;
+					regulator-ramp-delay = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					maxim,active-fps-power-up-slot = <3>;
+					maxim,active-fps-power-down-slot = <4>;
+				};
+
+				avddio_1v05: ldo8 {
+					regulator-name = "AVDDIO_1V05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+			};
+		};
+	};
+
+	i2c@7000d100 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		nau8825@1a {
+			compatible = "nuvoton,nau8825";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(E, 6) IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&tegra_car TEGRA210_CLK_CLK_OUT_2>;
+			clock-names = "mclk";
+
+			nuvoton,jkdet-enable;
+			nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>;
+			nuvoton,vref-impedance = <2>;
+			nuvoton,micbias-voltage = <6>;
+			nuvoton,sar-threshold-num = <4>;
+			nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>;
+			nuvoton,sar-hysteresis = <1>;
+			nuvoton,sar-voltage = <0>;
+			nuvoton,sar-compare-time = <0>;
+			nuvoton,sar-sampling-time = <0>;
+			nuvoton,short-key-debounce = <2>;
+			nuvoton,jack-insert-debounce = <7>;
+			nuvoton,jack-eject-debounce = <7>;
+			status = "okay";
+		};
+
+		audio-codec@2d {
+			compatible = "realtek,rt5677";
+			reg = <0x2d>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 0) IRQ_TYPE_LEVEL_HIGH>;
+			realtek,reset-gpio = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_LOW>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "okay";
+		};
+	};
+
 	pmc@7000e400 {
 		nvidia,invert-interrupt;
 		nvidia,suspend-mode = <0>;
@@ -1339,12 +1615,81 @@
 		status = "okay";
 	};
 
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-6}>;
+		phy-names = "usb2-0", "usb3-0";
+
+		dvddio-pex-supply = <&avddio_1v05>;
+		hvddio-pex-supply = <&pp1800>;
+		avdd-usb-supply = <&pp3300>;
+		avdd-pll-utmip-supply = <&pp1800>;
+		avdd-pll-uerefe-supply = <&pp1050_avdd>;
+		dvdd-pex-pll-supply = <&avddio_1v05>;
+		hvdd-pex-pll-e-supply = <&pp1800>;
+
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		status = "okay";
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-6 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "okay";
+				vbus-supply = <&usbc_vbus>;
+				mode = "otg";
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <0>;
+				status = "okay";
+			};
+		};
+	};
+
 	sdhci@700b0600 {
 		bus-width = <8>;
 		non-removable;
 		status = "okay";
 	};
 
+	aconnect@702c0000 {
+		status = "okay";
+
+		dma@702e2000 {
+			status = "okay";
+		};
+
+		agic@702f9000 {
+			status = "okay";
+		};
+	};
+
 	clocks {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -1417,8 +1762,98 @@
 		};
 	};
 
+	max98357a {
+		compatible = "maxim,max98357a";
+		status = "okay";
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
 	};
+
+	regulators {
+		compatible = "simple-bus";
+		device_type = "fixed-regulators";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ppvar_sys: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "PPVAR_SYS";
+			regulator-min-microvolt = <4400000>;
+			regulator-max-microvolt = <4400000>;
+			regulator-always-on;
+		};
+
+		pplcd_vdd: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "PPLCD_VDD";
+			regulator-min-microvolt = <4400000>;
+			regulator-max-microvolt = <4400000>;
+			gpio = <&gpio TEGRA_GPIO(V, 4) 0>;
+			enable-active-high;
+			regulator-boot-on;
+		};
+
+		pp3000_always: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "PP3000_ALWAYS";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
+		};
+
+		pp3300: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "PP3300";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+			enable-active-high;
+		};
+
+		pp5000: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "PP5000";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		pp1800_lcdio: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "PP1800_LCDIO";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&gpio TEGRA_GPIO(V, 3) 0>;
+			enable-active-high;
+			regulator-boot-on;
+		};
+
+		pp1800_cam: regulator@6 {
+			compatible = "regulator-fixed";
+			reg= <6>;
+			regulator-name = "PP1800_CAM";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&gpio TEGRA_GPIO(K, 3) 0>;
+			enable-active-high;
+		};
+
+		usbc_vbus: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			regulator-name = "USBC_VBUS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+	};
 };
diff --git a/src/arm64/nvidia/tegra210.dtsi b/src/arm64/nvidia/tegra210.dtsi
index 76fe31faa1a5..2f832df29da8 100644
--- a/src/arm64/nvidia/tegra210.dtsi
+++ b/src/arm64/nvidia/tegra210.dtsi
@@ -3,6 +3,7 @@
 #include <dt-bindings/memory/tegra210-mc.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
 
 / {
 	compatible = "nvidia,tegra210";
@@ -10,6 +11,69 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	pcie-controller@01003000 {
+		compatible = "nvidia,tegra210-pcie";
+		device_type = "pci";
+		reg = <0x0 0x01003000 0x0 0x00000800   /* PADS registers */
+		       0x0 0x01003800 0x0 0x00000800   /* AFI registers */
+		       0x0 0x02000000 0x0 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000   /* port 0 configuration space */
+			  0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000   /* port 1 configuration space */
+			  0x81000000 0 0x0        0x0 0x12000000 0 0x00010000   /* downstream I/O (64 KiB) */
+			  0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000   /* non-prefetchable memory (208 MiB) */
+			  0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
+
+		clocks = <&tegra_car TEGRA210_CLK_PCIE>,
+			 <&tegra_car TEGRA210_CLK_AFI>,
+			 <&tegra_car TEGRA210_CLK_PLL_E>,
+			 <&tegra_car TEGRA210_CLK_CML0>;
+		clock-names = "pex", "afi", "pll_e", "cml";
+		resets = <&tegra_car 70>,
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <4>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+	};
+
 	host1x@50000000 {
 		compatible = "nvidia,tegra210-host1x", "simple-bus";
 		reg = <0x0 0x50000000 0x0 0x00034000>;
@@ -34,7 +98,28 @@
 			clock-names = "dpaux", "parent";
 			resets = <&tegra_car 207>;
 			reset-names = "dpaux";
+			power-domains = <&pd_sor>;
 			status = "disabled";
+
+			state_dpaux1_aux: pinmux-aux {
+				groups = "dpaux-io";
+				function = "aux";
+			};
+
+			state_dpaux1_i2c: pinmux-i2c {
+				groups = "dpaux-io";
+				function = "i2c";
+			};
+
+			state_dpaux1_off: pinmux-off {
+				groups = "dpaux-io";
+				function = "off";
+			};
+
+			i2c-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		vi@54080000 {
@@ -88,6 +173,7 @@
 			clock-names = "dsi", "lp", "parent";
 			resets = <&tegra_car 48>;
 			reset-names = "dsi";
+			power-domains = <&pd_sor>;
 			nvidia,mipi-calibrate = <&mipi 0x0c0>; /* DSIA & DSIB pads */
 
 			status = "disabled";
@@ -117,6 +203,7 @@
 			clock-names = "dsi", "lp", "parent";
 			resets = <&tegra_car 82>;
 			reset-names = "dsi";
+			power-domains = <&pd_sor>;
 			nvidia,mipi-calibrate = <&mipi 0x300>; /* DSIC & DSID pads */
 
 			status = "disabled";
@@ -154,6 +241,11 @@
 			clock-names = "sor", "parent", "dp", "safe";
 			resets = <&tegra_car 182>;
 			reset-names = "sor";
+			pinctrl-0 = <&state_dpaux_aux>;
+			pinctrl-1 = <&state_dpaux_i2c>;
+			pinctrl-2 = <&state_dpaux_off>;
+			pinctrl-names = "aux", "i2c", "off";
+			power-domains = <&pd_sor>;
 			status = "disabled";
 		};
 
@@ -162,12 +254,18 @@
 			reg = <0x0 0x54580000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA210_CLK_SOR1>,
+				 <&tegra_car TEGRA210_CLK_SOR1_SRC>,
 				 <&tegra_car TEGRA210_CLK_PLL_D2_OUT0>,
 				 <&tegra_car TEGRA210_CLK_PLL_DP>,
 				 <&tegra_car TEGRA210_CLK_SOR_SAFE>;
-			clock-names = "sor", "parent", "dp", "safe";
+			clock-names = "sor", "source", "parent", "dp", "safe";
 			resets = <&tegra_car 183>;
 			reset-names = "sor";
+			pinctrl-0 = <&state_dpaux1_aux>;
+			pinctrl-1 = <&state_dpaux1_i2c>;
+			pinctrl-2 = <&state_dpaux1_off>;
+			pinctrl-names = "aux", "i2c", "off";
+			power-domains = <&pd_sor>;
 			status = "disabled";
 		};
 
@@ -180,7 +278,28 @@
 			clock-names = "dpaux", "parent";
 			resets = <&tegra_car 181>;
 			reset-names = "dpaux";
+			power-domains = <&pd_sor>;
 			status = "disabled";
+
+			state_dpaux_aux: pinmux-aux {
+				groups = "dpaux-io";
+				function = "aux";
+			};
+
+			state_dpaux_i2c: pinmux-i2c {
+				groups = "dpaux-io";
+				function = "i2c";
+			};
+
+			state_dpaux_off: pinmux-off {
+				groups = "dpaux-io";
+				function = "off";
+			};
+
+			i2c-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		isp@54600000 {
@@ -276,7 +395,7 @@
 	};
 
 	gpio: gpio@6000d000 {
-		compatible = "nvidia,tegra210-gpio", "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
+		compatible = "nvidia,tegra210-gpio", "nvidia,tegra30-gpio";
 		reg = <0x0 0x6000d000 0x0 0x1000>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
@@ -478,6 +597,9 @@
 		reset-names = "i2c";
 		dmas = <&apbdma 26>, <&apbdma 26>;
 		dma-names = "rx", "tx";
+		pinctrl-0 = <&state_dpaux1_i2c>;
+		pinctrl-1 = <&state_dpaux1_off>;
+		pinctrl-names = "default", "idle";
 		status = "disabled";
 	};
 
@@ -508,6 +630,9 @@
 		reset-names = "i2c";
 		dmas = <&apbdma 30>, <&apbdma 30>;
 		dma-names = "rx", "tx";
+		pinctrl-0 = <&state_dpaux_i2c>;
+		pinctrl-1 = <&state_dpaux_off>;
+		pinctrl-names = "default", "idle";
 		status = "disabled";
 	};
 
@@ -584,6 +709,53 @@
 		reg = <0x0 0x7000e400 0x0 0x400>;
 		clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
+
+		powergates {
+			pd_audio: aud {
+				clocks = <&tegra_car TEGRA210_CLK_APE>,
+					 <&tegra_car TEGRA210_CLK_APB2APE>;
+				resets = <&tegra_car 198>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_sor: sor {
+				clocks = <&tegra_car TEGRA210_CLK_SOR0>,
+					 <&tegra_car TEGRA210_CLK_SOR1>,
+					 <&tegra_car TEGRA210_CLK_CSI>,
+					 <&tegra_car TEGRA210_CLK_DSIA>,
+					 <&tegra_car TEGRA210_CLK_DSIB>,
+					 <&tegra_car TEGRA210_CLK_DPAUX>,
+					 <&tegra_car TEGRA210_CLK_DPAUX1>,
+					 <&tegra_car TEGRA210_CLK_MIPI_CAL>;
+				resets = <&tegra_car TEGRA210_CLK_SOR0>,
+					 <&tegra_car TEGRA210_CLK_SOR1>,
+					 <&tegra_car TEGRA210_CLK_CSI>,
+					 <&tegra_car TEGRA210_CLK_DSIA>,
+					 <&tegra_car TEGRA210_CLK_DSIB>,
+					 <&tegra_car TEGRA210_CLK_DPAUX>,
+					 <&tegra_car TEGRA210_CLK_DPAUX1>,
+					 <&tegra_car TEGRA210_CLK_MIPI_CAL>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_xusbss: xusba {
+				clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>;
+				resets = <&tegra_car TEGRA210_CLK_XUSB_SS>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_xusbdev: xusbb {
+				clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>;
+				resets = <&tegra_car 95>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_xusbhost: xusbc {
+				clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>;
+				resets = <&tegra_car TEGRA210_CLK_XUSB_HOST>;
+				#power-domain-cells = <0>;
+			};
+		};
 	};
 
 	fuse@7000f800 {
@@ -621,6 +793,196 @@
 		status = "disabled";
 	};
 
+	usb@70090000 {
+		compatible = "nvidia,tegra210-xusb";
+		reg = <0x0 0x70090000 0x0 0x8000>,
+		      <0x0 0x70098000 0x0 0x1000>,
+		      <0x0 0x70099000 0x0 0x1000>;
+		reg-names = "hcd", "fpci", "ipfs";
+
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>,
+			 <&tegra_car TEGRA210_CLK_XUSB_HOST_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_FALCON_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_SS>,
+			 <&tegra_car TEGRA210_CLK_XUSB_SS_DIV2>,
+			 <&tegra_car TEGRA210_CLK_XUSB_SS_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>,
+			 <&tegra_car TEGRA210_CLK_PLL_U_480M>,
+			 <&tegra_car TEGRA210_CLK_CLK_M>,
+			 <&tegra_car TEGRA210_CLK_PLL_E>;
+		clock-names = "xusb_host", "xusb_host_src",
+			      "xusb_falcon_src", "xusb_ss",
+			      "xusb_ss_div2", "xusb_ss_src",
+			      "xusb_hs_src", "xusb_fs_src",
+			      "pll_u_480m", "clk_m", "pll_e";
+		resets = <&tegra_car 89>, <&tegra_car 156>,
+			 <&tegra_car 143>;
+		reset-names = "xusb_host", "xusb_ss", "xusb_src";
+
+		nvidia,xusb-padctl = <&padctl>;
+
+		status = "disabled";
+	};
+
+	padctl: padctl@7009f000 {
+		compatible = "nvidia,tegra210-xusb-padctl";
+		reg = <0x0 0x7009f000 0x0 0x1000>;
+		resets = <&tegra_car 142>;
+		reset-names = "padctl";
+
+		status = "disabled";
+
+		pads {
+			usb2 {
+				clocks = <&tegra_car TEGRA210_CLK_USB2_TRK>;
+				clock-names = "trk";
+				status = "disabled";
+
+				lanes {
+					usb2-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-3 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			hsic {
+				clocks = <&tegra_car TEGRA210_CLK_HSIC_TRK>;
+				clock-names = "trk";
+				status = "disabled";
+
+				lanes {
+					hsic-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					hsic-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			pcie {
+				clocks = <&tegra_car TEGRA210_CLK_PLL_E>;
+				clock-names = "pll";
+				resets = <&tegra_car 205>;
+				reset-names = "phy";
+				status = "disabled";
+
+				lanes {
+					pcie-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-3 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-4 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-5 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-6 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			sata {
+				clocks = <&tegra_car TEGRA210_CLK_PLL_E>;
+				clock-names = "pll";
+				resets = <&tegra_car 204>;
+				reset-names = "phy";
+				status = "disabled";
+
+				lanes {
+					sata-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "disabled";
+			};
+
+			usb2-1 {
+				status = "disabled";
+			};
+
+			usb2-2 {
+				status = "disabled";
+			};
+
+			usb2-3 {
+				status = "disabled";
+			};
+
+			hsic-0 {
+				status = "disabled";
+			};
+
+			usb3-0 {
+				status = "disabled";
+			};
+
+			usb3-1 {
+				status = "disabled";
+			};
+
+			usb3-2 {
+				status = "disabled";
+			};
+
+			usb3-3 {
+				status = "disabled";
+			};
+		};
+	};
+
 	sdhci@700b0000 {
 		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0000 0x0 0x200>;
@@ -670,9 +1032,66 @@
 		reg = <0x0 0x700e3000 0x0 0x100>;
 		clocks = <&tegra_car TEGRA210_CLK_MIPI_CAL>;
 		clock-names = "mipi-cal";
+		power-domains = <&pd_sor>;
 		#nvidia,mipi-calibrate-cells = <1>;
 	};
 
+	aconnect@702c0000 {
+		compatible = "nvidia,tegra210-aconnect";
+		clocks = <&tegra_car TEGRA210_CLK_APE>,
+			 <&tegra_car TEGRA210_CLK_APB2APE>;
+		clock-names = "ape", "apb2ape";
+		power-domains = <&pd_audio>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x702c0000 0x0 0x702c0000 0x00040000>;
+		status = "disabled";
+
+		adma: dma@702e2000 {
+			compatible = "nvidia,tegra210-adma";
+			reg = <0x702e2000 0x2000>;
+			interrupt-parent = <&agic>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
+			clock-names = "d_audio";
+			status = "disabled";
+		};
+
+		agic: agic@702f9000 {
+			compatible = "nvidia,tegra210-agic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x702f9000 0x2000>,
+			      <0x702fa000 0x2000>;
+			interrupts = <GIC_SPI 102 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&tegra_car TEGRA210_CLK_APE>;
+			clock-names = "clk";
+			status = "disabled";
+		};
+	};
+
 	spi@70410000 {
 		compatible = "nvidia,tegra210-qspi";
 		reg = <0x0 0x70410000 0x0 0x1000>;
@@ -804,4 +1223,130 @@
 				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-parent = <&gic>;
 	};
+
+	soctherm: thermal-sensor@700e2000 {
+		compatible = "nvidia,tegra210-soctherm";
+		reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */
+			0x0 0x60006000 0x0 0x400>; /* CAR reg_base */
+		reg-names = "soctherm-reg", "car-reg";
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_TSENSOR>,
+			<&tegra_car TEGRA210_CLK_SOC_THERM>;
+		clock-names = "tsensor", "soctherm";
+		resets = <&tegra_car 78>;
+		reset-names = "soctherm";
+		#thermal-sensor-cells = <1>;
+
+		throttle-cfgs {
+			throttle_heavy: heavy {
+				nvidia,priority = <100>;
+				nvidia,cpu-throt-percent = <85>;
+
+				#cooling-cells = <2>;
+			};
+		};
+	};
+
+	thermal-zones {
+		cpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+			trips {
+				cpu-shutdown-trip {
+					temperature = <102500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_throttle_trip: throttle-trip {
+					temperature = <98500>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+		mem {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+			trips {
+				mem-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
+		gpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+			trips {
+				gpu-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				gpu_throttle_trip: throttle-trip {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+		pllx {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+			trips {
+				pllx-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
+	};
 };
diff --git a/src/arm64/qcom/apq8016-sbc-soc-pins.dtsi b/src/arm64/qcom/apq8016-sbc-soc-pins.dtsi
index ee828a8a8236..e1e6c6b5c489 100644
--- a/src/arm64/qcom/apq8016-sbc-soc-pins.dtsi
+++ b/src/arm64/qcom/apq8016-sbc-soc-pins.dtsi
@@ -24,4 +24,52 @@
 			bias-pull-up;
 		};
 	};
+
+	adv7533_int_active: adv533_int_active {
+		pinmux {
+			function = "gpio";
+			pins = "gpio31";
+		};
+		pinconf {
+			pins = "gpio31";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	adv7533_int_suspend: adv7533_int_suspend {
+		pinmux {
+			function = "gpio";
+			pins = "gpio31";
+		};
+		pinconf {
+			pins = "gpio31";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	adv7533_switch_active: adv7533_switch_active {
+		pinmux {
+			function = "gpio";
+			pins = "gpio32";
+		};
+		pinconf {
+			pins = "gpio32";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	adv7533_switch_suspend: adv7533_switch_suspend {
+		pinmux {
+			function = "gpio";
+			pins = "gpio32";
+		};
+		pinconf {
+			pins = "gpio32";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
 };
diff --git a/src/arm64/qcom/apq8016-sbc.dtsi b/src/arm64/qcom/apq8016-sbc.dtsi
index 205ef89b8ca0..08bd5ebafb4e 100644
--- a/src/arm64/qcom/apq8016-sbc.dtsi
+++ b/src/arm64/qcom/apq8016-sbc.dtsi
@@ -15,6 +15,7 @@
 #include "pm8916.dtsi"
 #include "apq8016-sbc-soc-pins.dtsi"
 #include "apq8016-sbc-pmic-pins.dtsi"
+#include <dt-bindings/sound/apq8016-lpass.h>
 
 / {
 	aliases {
@@ -33,6 +34,10 @@
 	};
 
 	soc {
+		dma@7884000 {
+			status = "okay";
+		};
+
 		serial@78af000 {
 			label = "LS-UART0";
 			status = "okay";
@@ -59,6 +64,47 @@
 		/* On High speed expansion */
 			label = "HS-I2C2";
 			status = "okay";
+
+			adv_bridge: bridge@39 {
+				status = "okay";
+
+				compatible = "adi,adv7533";
+				reg = <0x39>;
+
+				interrupt-parent = <&msmgpio>;
+				interrupts = <31 2>;
+
+				adi,dsi-lanes = <4>;
+
+				pd-gpios = <&msmgpio 32 0>;
+
+				avdd-supply = <&pm8916_l6>;
+				v1p2-supply = <&pm8916_l6>;
+				v3p3-supply = <&pm8916_l17>;
+
+				pinctrl-names = "default","sleep";
+				pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
+				pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						adv7533_in: endpoint {
+							remote-endpoint = <&dsi0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						adv7533_out: endpoint {
+							remote-endpoint = <&hdmi_con>;
+						};
+					};
+				};
+			};
 		};
 
 		i2c@78ba000 {
@@ -140,6 +186,18 @@
 			status = "okay";
 		};
 
+		sdhci@07864000 {
+			vmmc-supply = <&pm8916_l11>;
+			vqmmc-supply = <&pm8916_l12>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+			pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+			cd-gpios = <&msmgpio 38 0x1>;
+			status = "okay";
+		};
+
 		usb@78d9000 {
 			extcon = <&usb_id>, <&usb_id>;
 			status = "okay";
@@ -164,6 +222,90 @@
 		lpass@07708000 {
 			status = "okay";
 		};
+
+		mdss@1a00000 {
+			status = "okay";
+
+			mdp@1a01000 {
+				status = "okay";
+			};
+
+			dsi@1a98000 {
+				status = "okay";
+
+				vdda-supply = <&pm8916_l2>;
+				vddio-supply = <&pm8916_l6>;
+
+				ports {
+					port@1 {
+						endpoint {
+							remote-endpoint = <&adv7533_in>;
+							data-lanes = <0 1 2 3>;
+						};
+					};
+				};
+			};
+
+			dsi-phy@1a98300 {
+				status = "okay";
+
+				vddio-supply = <&pm8916_l6>;
+			};
+		};
+
+		lpass_codec: codec{
+			status = "okay";
+		};
+
+		/*
+		Internal Codec
+			playback - Primary MI2S
+			capture - Ter MI2S
+
+		External Primary:
+			playback - secondary MI2S
+			capture - Quat MI2S
+
+		External Secondary:
+			playback - Quat MI2S
+			capture - Quat MI2S
+
+		*/
+
+                sound: sound {
+                        compatible = "qcom,apq8016-sbc-sndcard";
+                        reg = <0x07702000 0x4>, <0x07702004 0x4>;
+                        reg-names = "mic-iomux", "spkr-iomux";
+
+                        status = "okay";
+                        pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
+                        pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
+                        pinctrl-names = "default", "sleep";
+                        qcom,model = "DB410c";
+                        qcom,audio-routing =
+                                "AMIC2", "MIC BIAS Internal2",
+                                "AMIC3", "MIC BIAS External1";
+
+                        internal-codec-playback-dai-link@0 {            /* I2S - Internal codec */
+                                link-name = "WCD";
+                                cpu { /* PRIMARY */
+                                        sound-dai = <&lpass MI2S_PRIMARY>;
+                                };
+                                codec {
+                                        sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+                                };
+                        };
+
+                        internal-codec-capture-dai-link@0 {             /* I2S - Internal codec */
+                                link-name = "WCD-Capture";
+                                cpu { /* PRIMARY */
+                                        sound-dai = <&lpass MI2S_TERTIARY>;
+                                };
+                                codec {
+                                        sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
+                                };
+                        };
+                };
 	};
 
 	usb2513 {
@@ -178,6 +320,23 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb_id_default>;
 	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7533_out>;
+			};
+		};
+	};
+};
+
+&wcd_codec {
+        status = "okay";
+        clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
+        clock-names = "mclk";
 };
 
 &smd_rpm_regulators {
@@ -210,8 +369,8 @@
 	};
 
 	l2 {
-		regulator-min-microvolt = <375000>;
-		regulator-max-microvolt = <1525000>;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
 	};
 
 	l3 {
@@ -230,8 +389,8 @@
 	};
 
 	l6 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
 	};
 
 	l7 {
@@ -290,8 +449,8 @@
 	};
 
 	l17 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 	};
 
 	l18 {
diff --git a/src/arm64/qcom/apq8096-db820c-pins.dtsi b/src/arm64/qcom/apq8096-db820c-pins.dtsi
new file mode 100644
index 000000000000..24552f19b3fa
--- /dev/null
+++ b/src/arm64/qcom/apq8096-db820c-pins.dtsi
@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+&msmgpio {
+	sdc2_cd_on: sdc2_cd_on {
+		mux {
+			pins = "gpio38";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio38";
+			bias-pull-up;		/* pull up */
+			drive-strength = <16>;	/* 16 MA */
+		};
+	};
+
+	sdc2_cd_off: sdc2_cd_off {
+		mux {
+			pins = "gpio38";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio38";
+			bias-pull-up;		/* pull up */
+			drive-strength = <2>;	/* 2 MA */
+		};
+	};
+};
diff --git a/src/arm64/qcom/apq8096-db820c-pmic-pins.dtsi b/src/arm64/qcom/apq8096-db820c-pmic-pins.dtsi
new file mode 100644
index 000000000000..0de95171d6d0
--- /dev/null
+++ b/src/arm64/qcom/apq8096-db820c-pmic-pins.dtsi
@@ -0,0 +1,15 @@
+
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+&pm8994_gpios {
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&ls_exp_gpio_f>;
+
+	ls_exp_gpio_f: pm8916_mpp4 {
+		pinconf {
+			pins = "gpio5";
+			output-low;
+			power-source = <2>; // PM8994_GPIO_S4, 1.8V
+		};
+	};
+};
diff --git a/src/arm64/qcom/apq8096-db820c.dts b/src/arm64/qcom/apq8096-db820c.dts
new file mode 100644
index 000000000000..230e9c8484ac
--- /dev/null
+++ b/src/arm64/qcom/apq8096-db820c.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "apq8096-db820c.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. DB820c";
+	compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc";
+};
diff --git a/src/arm64/qcom/apq8096-db820c.dtsi b/src/arm64/qcom/apq8096-db820c.dtsi
new file mode 100644
index 000000000000..422959b87d12
--- /dev/null
+++ b/src/arm64/qcom/apq8096-db820c.dtsi
@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "msm8996.dtsi"
+#include "pm8994.dtsi"
+#include "apq8096-db820c-pins.dtsi"
+#include "apq8096-db820c-pmic-pins.dtsi"
+
+/ {
+	aliases {
+		serial0 = &blsp2_uart1;
+		serial1 = &blsp2_uart2;
+		i2c0	= &blsp1_i2c2;
+		i2c1	= &blsp2_i2c1;
+		i2c2	= &blsp2_i2c0;
+		spi0	= &blsp1_spi0;
+		spi1	= &blsp2_spi5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		serial@75b0000 {
+			label = "LS-UART1";
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart1_2pins_default>;
+			pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
+		};
+
+		serial@75b1000 {
+			label = "LS-UART0";
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart2_4pins_default>;
+			pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
+		};
+
+		i2c@07577000 {
+		/* On Low speed expansion */
+			label = "LS-I2C0";
+			status = "okay";
+		};
+
+		i2c@075b6000 {
+		/* On Low speed expansion */
+			label = "LS-I2C1";
+			status = "okay";
+		};
+
+		spi@07575000 {
+		/* On Low speed expansion */
+			label = "LS-SPI0";
+			status = "okay";
+		};
+
+		i2c@075b5000 {
+		/* On High speed expansion */
+			label = "HS-I2C2";
+			status = "okay";
+		};
+
+		spi@075ba000{
+		/* On High speed expansion */
+			label = "HS-SPI1";
+			status = "okay";
+		};
+
+		sdhci@74a4900 {
+		/* External SD card */
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+			pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+			cd-gpios = <&msmgpio 38 0x1>;
+			status = "okay";
+		};
+	};
+};
diff --git a/src/arm64/qcom/msm8916.dtsi b/src/arm64/qcom/msm8916.dtsi
index 96812007850e..f8ff327667c5 100644
--- a/src/arm64/qcom/msm8916.dtsi
+++ b/src/arm64/qcom/msm8916.dtsi
@@ -42,15 +42,55 @@
 		#size-cells = <2>;
 		ranges;
 
-		reserve_aligned@86000000 {
-			reg = <0x0 0x86000000 0x0 0x0300000>;
+		tz-apps@86000000 {
+			reg = <0x0 0x86000000 0x0 0x300000>;
 			no-map;
 		};
 
 		smem_mem: smem_region@86300000 {
-			reg = <0x0 0x86300000 0x0 0x0100000>;
+			reg = <0x0 0x86300000 0x0 0x100000>;
 			no-map;
 		};
+
+		hypervisor@86400000 {
+			reg = <0x0 0x86400000 0x0 0x100000>;
+			no-map;
+		};
+
+		tz@86500000 {
+			reg = <0x0 0x86500000 0x0 0x180000>;
+			no-map;
+		};
+
+		reserved@8668000 {
+			reg = <0x0 0x86680000 0x0 0x80000>;
+			no-map;
+		};
+
+		rmtfs@86700000 {
+			reg = <0x0 0x86700000 0x0 0xe0000>;
+			no-map;
+		};
+
+		rfsa@867e00000 {
+			reg = <0x0 0x867e0000 0x0 0x20000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@86800000 {
+			reg = <0x0 0x86800000 0x0 0x2b00000>;
+			no-map;
+		};
+
+		wcnss@89300000 {
+			reg = <0x0 0x89300000 0x0 0x600000>;
+			no-map;
+		};
+
+		mba_mem: mba@8ea00000 {
+			no-map;
+			reg = <0 0x8ea00000 0 0x100000>;
+		};
 	};
 
 	cpus {
@@ -62,6 +102,8 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0>;
 			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SPC>;
 		};
 
 		CPU1: cpu@1 {
@@ -69,6 +111,8 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x1>;
 			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SPC>;
 		};
 
 		CPU2: cpu@2 {
@@ -76,6 +120,8 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x2>;
 			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SPC>;
 		};
 
 		CPU3: cpu@3 {
@@ -83,12 +129,78 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x3>;
 			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SPC>;
 		};
 
 		L2_0: l2-cache {
 		      compatible = "cache";
 		      cache-level = <2>;
 		};
+
+		idle-states {
+			CPU_SPC: spc {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x40000002>;
+				entry-latency-us = <130>;
+				exit-latency-us = <150>;
+				min-residency-us = <2000>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>;
+	};
+
+	thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
 	};
 
 	timer {
@@ -122,6 +234,15 @@
 		hwlocks = <&tcsr_mutex 3>;
 	};
 
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm";
+			clocks = <&gcc GCC_CRYPTO_CLK>, <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+			#reset-cells = <1>;
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -156,6 +277,11 @@
 			reg = <0x1905000 0x20000>;
 		};
 
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-msm8916", "syscon";
+			reg = <0x1937000 0x30000>;
+		};
+
 		tcsr_mutex: hwlock {
 			compatible = "qcom,tcsr-mutex";
 			syscon = <&tcsr_mutex_regs 0 0x1000>;
@@ -378,6 +504,15 @@
 			reg-names = "lpass-lpaif";
 		};
 
+                lpass_codec: codec{
+			compatible = "qcom,msm8916-wcd-digital-codec";
+			reg = <0x0771c000 0x400>;
+			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+				 <&gcc GCC_CODEC_DIGCODEC_CLK>;
+			clock-names = "ahbix-clk", "mclk";
+			#sound-dai-cells = <1>;
+                };
+
 		sdhc_1: sdhci@07824000 {
 			compatible = "qcom,sdhci-msm-v4";
 			reg = <0x07824900 0x11c>, <0x07824000 0x800>;
@@ -386,8 +521,10 @@
 			interrupts = <0 123 0>, <0 138 0>;
 			interrupt-names = "hc_irq", "pwr_irq";
 			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&gcc GCC_SDCC1_AHB_CLK>;
-			clock-names = "core", "iface";
+				 <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "core", "iface", "xo";
+			mmc-ddr-1_8v;
 			bus-width = <8>;
 			non-removable;
 			status = "disabled";
@@ -401,8 +538,9 @@
 			interrupts = <0 125 0>, <0 221 0>;
 			interrupt-names = "hc_irq", "pwr_irq";
 			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
-				 <&gcc GCC_SDCC2_AHB_CLK>;
-			clock-names = "core", "iface";
+				 <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "core", "iface", "xo";
 			bus-width = <4>;
 			status = "disabled";
 		};
@@ -411,7 +549,7 @@
 			compatible = "qcom,ci-hdrc";
 			reg = <0x78d9000 0x400>;
 			dr_mode = "peripheral";
-			interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 			usb-phy = <&usb_otg>;
 			status = "disabled";
 		};
@@ -419,7 +557,7 @@
 		usb_host: ehci@78d9000 {
 			compatible = "qcom,ehci-host";
 			reg = <0x78d9000 0x400>;
-			interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 			usb-phy = <&usb_otg>;
 			status = "disabled";
 		};
@@ -427,8 +565,8 @@
 		usb_otg: phy@78d9000 {
 			compatible = "qcom,usb-otg-snps";
 			reg = <0x78d9000 0x400>;
-			interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_BOTH>,
-				     <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 
 			qcom,vdd-levels = <500000 1000000 1320000>;
 			qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>;
@@ -522,7 +660,7 @@
 			      <0x200a000 0x002100>;
 			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
 			#address-cells = <2>;
@@ -537,6 +675,187 @@
 			clocks = <&gcc GCC_PRNG_AHB_CLK>;
 			clock-names = "core";
 		};
+
+		qfprom: qfprom@5c000 {
+			compatible = "qcom,qfprom";
+			reg = <0x5c000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			tsens_caldata: caldata@d0 {
+				reg = <0xd0 0x8>;
+			};
+			tsens_calsel: calsel@ec {
+				reg = <0xec 0x4>;
+			};
+		};
+
+		tsens: thermal-sensor@4a8000 {
+			compatible = "qcom,msm8916-tsens";
+			reg = <0x4a8000 0x2000>;
+			nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
+			nvmem-cell-names = "calib", "calib_sel";
+			#thermal-sensor-cells = <1>;
+		};
+
+		mdss: mdss@1a00000 {
+			compatible = "qcom,mdss";
+			reg = <0x1a00000 0x1000>,
+			      <0x1ac8000 0x3000>;
+			reg-names = "mdss_phys", "vbif_phys";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>;
+			clock-names = "iface_clk",
+				      "bus_clk",
+				      "vsync_clk";
+
+			interrupts = <0 72 0>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			mdp: mdp@1a01000 {
+				compatible = "qcom,mdp5";
+				reg = <0x1a01000 0x90000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0 0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>;
+				clock-names = "iface_clk",
+					      "bus_clk",
+					      "core_clk",
+					      "vsync_clk";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&dsi0_in>;
+						};
+					};
+				};
+			};
+
+			dsi0: dsi@1a98000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0x1a98000 0x25c>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4 0>;
+
+				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+						  <&gcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&dsi_phy0 0>,
+							 <&dsi_phy0 1>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core_clk",
+					      "iface_clk",
+					      "bus_clk",
+					      "byte_clk",
+					      "pixel_clk",
+					      "core_clk";
+				phys = <&dsi_phy0>;
+				phy-names = "dsi-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			dsi_phy0: dsi-phy@1a98300 {
+				compatible = "qcom,dsi-phy-28nm-lp";
+				reg = <0x1a98300 0xd4>,
+				      <0x1a98500 0x280>,
+				      <0x1a98780 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>;
+				clock-names = "iface_clk";
+			};
+		};
+
+
+		hexagon@4080000 {
+			compatible = "qcom,q6v5-pil";
+			reg = <0x04080000 0x100>,
+			      <0x04020000 0x040>;
+
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc 0 24 1>,
+					      <&hexagon_smp2p_in 0 0>,
+					      <&hexagon_smp2p_in 1 0>,
+					      <&hexagon_smp2p_in 2 0>,
+					      <&hexagon_smp2p_in 3 0>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>;
+			clock-names = "iface", "bus", "mem";
+
+			qcom,smem-states = <&hexagon_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&scm 0>;
+			reset-names = "mss_restart";
+
+			mx-supply = <&pm8916_l3>;
+			pll-supply = <&pm8916_l7>;
+
+			qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
+
+			status = "disabled";
+
+			mba {
+				memory-region = <&mba_mem>;
+			};
+
+			mpss {
+				memory-region = <&mpss_mem>;
+			};
+		};
 	};
 
 	smd {
@@ -584,6 +903,96 @@
 				};
 			};
 		};
+
+		hexagon {
+			interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;
+
+			qcom,smd-edge = <0>;
+			qcom,ipc = <&apcs 8 12>;
+			qcom,remote-pid = <1>;
+		};
+	};
+
+	hexagon-smp2p {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <0 27 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		hexagon_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	wcnss-smp2p {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
+
+		interrupts = <0 143 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		qcom,ipc-1 = <&apcs 0 13>;
+		qcom,ipc-6 = <&apcs 0 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smsm: hexagon@1 {
+			reg = <1>;
+			interrupts = <0 26 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@6 {
+			reg = <6>;
+			interrupts = <0 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 };
 
diff --git a/src/arm64/qcom/msm8992-bullhead-rev-101.dts b/src/arm64/qcom/msm8992-bullhead-rev-101.dts
new file mode 100644
index 000000000000..454213391671
--- /dev/null
+++ b/src/arm64/qcom/msm8992-bullhead-rev-101.dts
@@ -0,0 +1,41 @@
+/* Copyright (c) 2015, LGE Inc. All rights reserved.
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "msm8992.dtsi"
+
+/ {
+	model = "LG Nexus 5X";
+	compatible = "lg,bullhead", "qcom,msm8992";
+	/* required for bootloader to select correct board */
+	qcom,board-id = <0xb64 0>;
+	qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		serial@f991e000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			pinctrl-1 = <&blsp1_uart2_sleep>;
+		};
+	};
+};
diff --git a/src/arm64/qcom/msm8992-pins.dtsi b/src/arm64/qcom/msm8992-pins.dtsi
new file mode 100644
index 000000000000..d2a26f0f8d73
--- /dev/null
+++ b/src/arm64/qcom/msm8992-pins.dtsi
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+&msmgpio {
+	blsp1_uart2_default: blsp1_uart2_default {
+		pinmux {
+			function = "blsp_uart2";
+			pins = "gpio4", "gpio5";
+		};
+		pinconf {
+			pins = "gpio4", "gpio5";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	blsp1_uart2_sleep: blsp1_uart2_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio4", "gpio5";
+		};
+		pinconf {
+			pins = "gpio4", "gpio5";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+};
diff --git a/src/arm64/qcom/msm8992.dtsi b/src/arm64/qcom/msm8992.dtsi
new file mode 100644
index 000000000000..44b2d37d8c4b
--- /dev/null
+++ b/src/arm64/qcom/msm8992.dtsi
@@ -0,0 +1,184 @@
+/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8994.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. MSM 8992";
+	compatible = "qcom,msm8992";
+	// msm-id needed by bootloader for selecting correct blob
+	qcom,msm-id = <251 0>, <252 0>;
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	xo_board: xo_board {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <19200000>;
+	};
+
+	sleep_clk: sleep_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@f9000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0xf9000000 0x1000>,
+				<0xf9002000 0x1000>;
+		};
+
+		timer@f9020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xf9020000 0x1000>;
+
+			frame@f9021000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+						<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9021000 0x1000>,
+					<0xf9022000 0x1000>;
+			};
+
+			frame@f9023000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9024000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9025000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9026000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9027000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9028000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+
+		msmgpio: pinctrl@fd510000 {
+			compatible = "qcom,msm8994-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		blsp1_uart2: serial@f991e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991e000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>;
+			status = "disabled";
+			clock-names = "core", "iface";
+			clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>,
+				<&clock_gcc GCC_BLSP1_AHB_CLK>;
+		};
+
+		clock_gcc: clock-controller@fc400000 {
+			compatible = "qcom,gcc-msm8994";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0xfc400000 0x2000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0 0>; // bootloader will update
+	};
+};
+
+
+#include "msm8992-pins.dtsi"
diff --git a/src/arm64/qcom/msm8994-angler-rev-101.dts b/src/arm64/qcom/msm8994-angler-rev-101.dts
new file mode 100644
index 000000000000..dfa08f513dc4
--- /dev/null
+++ b/src/arm64/qcom/msm8994-angler-rev-101.dts
@@ -0,0 +1,40 @@
+/* Copyright (c) 2015, Huawei Inc. All rights reserved.
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "msm8994.dtsi"
+
+/ {
+	model = "Huawei Nexus 6P";
+	compatible = "huawei,angler", "qcom,msm8994";
+	/* required for bootloader to select correct board */
+	qcom,board-id = <8026 0>;
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		serial@f991e000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			pinctrl-1 = <&blsp1_uart2_sleep>;
+		};
+	};
+};
diff --git a/src/arm64/qcom/msm8994-pins.dtsi b/src/arm64/qcom/msm8994-pins.dtsi
new file mode 100644
index 000000000000..0e4eea0df25d
--- /dev/null
+++ b/src/arm64/qcom/msm8994-pins.dtsi
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+&msmgpio {
+	blsp1_uart2_default: blsp1_uart2_default {
+		pinmux {
+			function = "blsp_uart2";
+			pins = "gpio4", "gpio5";
+		};
+		pinconf {
+			pins = "gpio4", "gpio5";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	blsp1_uart2_sleep: blsp1_uart2_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio4", "gpio5";
+		};
+		pinconf {
+			pins = "gpio4", "gpio5";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+};
diff --git a/src/arm64/qcom/msm8994.dtsi b/src/arm64/qcom/msm8994.dtsi
new file mode 100644
index 000000000000..f33c41d01c86
--- /dev/null
+++ b/src/arm64/qcom/msm8994.dtsi
@@ -0,0 +1,216 @@
+/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8994.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. MSM 8994";
+	compatible = "qcom,msm8994";
+	// msm-id and pmic-id are required by bootloader for
+	// proper selection of dt blob
+	qcom,msm-id = <207 0x20000>;
+	qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 2 0xff08>,
+			     <1 3 0xff08>,
+			     <1 4 0xff08>,
+			     <1 1 0xff08>;
+	};
+
+	soc: soc {
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@f9000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0xf9000000 0x1000>,
+				  <0xf9002000 0x1000>;
+		};
+
+		timer@f9020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xf9020000 0x1000>;
+
+			frame@f9021000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9021000 0x1000>,
+				      <0xf9022000 0x1000>;
+			};
+
+			frame@f9023000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9024000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9025000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9026000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9027000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9028000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+
+		msmgpio: pinctrl@fd510000 {
+			compatible = "qcom,msm8994-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		blsp1_uart2: serial@f991e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991e000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			clock-names = "core", "iface";
+			clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&clock_gcc GCC_BLSP1_AHB_CLK>;
+		};
+
+		tcsr_mutex_regs: syscon@fd484000 {
+			compatible = "syscon";
+			reg = <0xfd484000 0x2000>;
+		};
+
+		clock_gcc: clock-controller@fc400000 {
+			compatible = "qcom,gcc-msm8994";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0xfc400000 0x2000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		// We expect the bootloader to fill in the reg
+		reg = <0 0 0 0>;
+	};
+
+	xo_board: xo_board {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <19200000>;
+	};
+
+	sleep_clk: sleep_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		smem_mem: smem_region@6a00000 {
+			reg = <0x0 0x6a00000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	tcsr_mutex: hwlock {
+		compatible = "qcom,tcsr-mutex";
+		syscon = <&tcsr_mutex_regs 0 0x80>;
+		#hwlock-cells = <1>;
+	};
+
+	qcom,smem@6a00000 {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+};
+
+
+#include "msm8994-pins.dtsi"
diff --git a/src/arm64/qcom/msm8996-pins.dtsi b/src/arm64/qcom/msm8996-pins.dtsi
new file mode 100644
index 000000000000..659940434842
--- /dev/null
+++ b/src/arm64/qcom/msm8996-pins.dtsi
@@ -0,0 +1,303 @@
+/*
+ * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+&msmgpio {
+
+	blsp1_spi0_default: blsp1_spi0_default {
+		pinmux {
+			function = "blsp_spi1";
+			pins = "gpio0", "gpio1", "gpio3";
+		};
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio2";
+		};
+		pinconf {
+			pins = "gpio0", "gpio1", "gpio3";
+			drive-strength = <12>;
+			bias-disable;
+		};
+		pinconf_cs {
+			pins = "gpio2";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	blsp1_spi0_sleep: blsp1_spi0_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio0", "gpio1", "gpio2", "gpio3";
+		};
+		pinconf {
+			pins = "gpio0", "gpio1", "gpio2", "gpio3";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	blsp1_i2c2_default: blsp1_i2c2_default {
+		pinmux {
+			function = "blsp_i2c3";
+			pins = "gpio47", "gpio48";
+		};
+		pinconf {
+			pins = "gpio47", "gpio48";
+			drive-strength = <16>;
+			bias-disable = <0>;
+		};
+	};
+
+	blsp1_i2c2_sleep: blsp1_i2c2_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio47", "gpio48";
+		};
+		pinconf {
+			pins = "gpio47", "gpio48";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	blsp2_i2c0_default: blsp2_i2c0 {
+		pinmux {
+			function = "blsp_i2c7";
+			pins = "gpio55", "gpio56";
+		};
+		pinconf {
+			pins = "gpio55", "gpio56";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	blsp2_i2c0_sleep: blsp2_i2c0_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio55", "gpio56";
+		};
+		pinconf {
+			pins = "gpio55", "gpio56";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	blsp2_uart1_2pins_default: blsp2_uart1_2pins {
+		pinmux {
+			function = "blsp_uart8";
+			pins = "gpio4", "gpio5";
+		};
+		pinconf {
+			pins = "gpio4", "gpio5";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	blsp2_uart1_2pins_sleep: blsp2_uart1_2pins_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio4", "gpio5";
+		};
+		pinconf {
+			pins = "gpio4", "gpio5";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	blsp2_uart1_4pins_default: blsp2_uart1_4pins {
+		pinmux {
+			function = "blsp_uart8";
+			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+		};
+
+		pinconf {
+			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	blsp2_uart1_4pins_sleep: blsp2_uart1_4pins_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+		};
+
+		pinconf {
+			pins = "gpio4", "gpiio5", "gpio6", "gpio7";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	blsp2_i2c1_default: blsp2_i2c1 {
+		pinmux {
+			function = "blsp_i2c8";
+			pins = "gpio6", "gpio7";
+		};
+		pinconf {
+			pins = "gpio6", "gpio7";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	blsp2_i2c1_sleep: blsp2_i2c1_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio6", "gpio7";
+		};
+		pinconf {
+			pins = "gpio6", "gpio7";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	blsp2_uart2_2pins_default: blsp2_uart2_2pins {
+		pinmux {
+			function = "blsp_uart9";
+			pins = "gpio49", "gpio50";
+		};
+		pinconf {
+			pins = "gpio49", "gpio50";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	blsp2_uart2_2pins_sleep: blsp2_uart2_2pins_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio49", "gpio50";
+		};
+		pinconf {
+			pins = "gpio49", "gpio50";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	blsp2_uart2_4pins_default: blsp2_uart2_4pins {
+		pinmux {
+			function = "blsp_uart9";
+			pins = "gpio49", "gpio50", "gpio51", "gpio52";
+		};
+
+		pinconf {
+			pins = "gpio49", "gpio50", "gpio51", "gpio52";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	blsp2_uart2_4pins_sleep: blsp2_uart2_4pins_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio49", "gpio50", "gpio51", "gpio52";
+		};
+
+		pinconf {
+			pins = "gpio49", "gpio50", "gpio51", "gpio52";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	blsp2_spi5_default: blsp2_spi5_default {
+		pinmux {
+			function = "blsp_spi12";
+			pins = "gpio85", "gpio86", "gpio88";
+		};
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio87";
+		};
+		pinconf {
+			pins = "gpio85", "gpio86", "gpio88";
+			drive-strength = <12>;
+			bias-disable;
+		};
+		pinconf_cs {
+			pins = "gpio87";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	blsp2_spi5_sleep: blsp2_spi5_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio85", "gpio86", "gpio87", "gpio88";
+		};
+		pinconf {
+			pins = "gpio85", "gpio86", "gpio87", "gpio88";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	sdc2_clk_on: sdc2_clk_on {
+		config {
+			pins = "sdc2_clk";
+			bias-disable;		/* NO pull */
+			drive-strength = <16>;	/* 16 MA */
+		};
+	};
+
+	sdc2_clk_off: sdc2_clk_off {
+		config {
+			pins = "sdc2_clk";
+			bias-disable;		/* NO pull */
+			drive-strength = <2>;	/* 2 MA */
+		};
+	};
+
+	sdc2_cmd_on: sdc2_cmd_on {
+		config {
+			pins = "sdc2_cmd";
+			bias-pull-up;		/* pull up */
+			drive-strength = <10>;	/* 10 MA */
+		};
+	};
+
+	sdc2_cmd_off: sdc2_cmd_off {
+		config {
+			pins = "sdc2_cmd";
+			bias-pull-up;		/* pull up */
+			drive-strength = <2>;	/* 2 MA */
+		};
+	};
+
+	sdc2_data_on: sdc2_data_on {
+		config {
+			pins = "sdc2_data";
+			bias-pull-up;		/* pull up */
+			drive-strength = <10>;	/* 10 MA */
+		};
+	};
+
+	sdc2_data_off: sdc2_data_off {
+		config {
+			pins = "sdc2_data";
+			bias-pull-up;		/* pull up */
+			drive-strength = <2>;	/* 2 MA */
+		};
+	};
+};
diff --git a/src/arm64/qcom/msm8996.dtsi b/src/arm64/qcom/msm8996.dtsi
index 0506fb808c56..29ed6b61c737 100644
--- a/src/arm64/qcom/msm8996.dtsi
+++ b/src/arm64/qcom/msm8996.dtsi
@@ -30,6 +30,52 @@
 		reg = <0 0 0 0>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		mba_region: mba@91500000 {
+			reg = <0x0 0x91500000 0x0 0x200000>;
+			no-map;
+		};
+
+		slpi_region: slpi@90b00000 {
+			reg = <0x0 0x90b00000 0x0 0xa00000>;
+			no-map;
+		};
+
+		venus_region: venus@90400000 {
+			reg = <0x0 0x90400000 0x0 0x700000>;
+			no-map;
+		};
+
+		adsp_region: adsp@8ea00000 {
+			reg = <0x0 0x8ea00000 0x0 0x1a00000>;
+			no-map;
+		};
+
+		mpss_region: mpss@88800000 {
+			reg = <0x0 0x88800000 0x0 0x6200000>;
+			no-map;
+		};
+
+		smem_mem: smem-mem@86000000 {
+			reg = <0x0 0x86000000 0x0 0x200000>;
+			no-map;
+		};
+
+		memory@85800000 {
+			reg = <0x0 0x85800000 0x0 0x800000>;
+			no-map;
+		};
+
+		memory@86200000 {
+			reg = <0x0 0x86200000 0x0 0x2600000>;
+			no-map;
+		};
+	};
+
 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -97,6 +143,92 @@
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -106,14 +238,14 @@
 	};
 
 	clocks {
-		xo_board {
+		xo_board: xo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <19200000>;
 			clock-output-names = "xo_board";
 		};
 
-		sleep_clk {
+		sleep_clk: sleep_clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32764>;
@@ -126,12 +258,29 @@
 		method = "smc";
 	};
 
+	tcsr_mutex: hwlock {
+		compatible = "qcom,tcsr-mutex";
+		syscon = <&tcsr_mutex_regs 0 0x1000>;
+		#hwlock-cells = <1>;
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 		compatible = "simple-bus";
 
+		tcsr_mutex_regs: syscon@740000 {
+			compatible = "syscon";
+			reg = <0x740000 0x20000>;
+		};
+
 		intc: interrupt-controller@9bc0000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
@@ -143,6 +292,11 @@
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		apcs: syscon@9820000 {
+			compatible = "syscon";
+			reg = <0x9820000 0x1000>;
+		};
+
 		gcc: clock-controller@300000 {
 			compatible = "qcom,gcc-msm8996";
 			#clock-cells = <1>;
@@ -151,6 +305,42 @@
 			reg = <0x300000 0x90000>;
 		};
 
+		blsp1_spi0: spi@07575000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07575000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_spi0_default>;
+			pinctrl-1 = <&blsp1_spi0_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_i2c0: i2c@075b5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x075b5000 0x1000>;
+			interrupts = <GIC_SPI 101 0>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+				<&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c0_default>;
+			pinctrl-1 = <&blsp2_i2c0_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		tsens0: thermal-sensor@4a8000 {
+			compatible = "qcom,msm8996-tsens";
+			reg = <0x4a8000 0x2000>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		blsp2_uart1: serial@75b0000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x75b0000 0x1000>;
@@ -161,7 +351,78 @@
 			status = "disabled";
 		};
 
-		pinctrl@1010000 {
+		blsp2_i2c1: i2c@075b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x075b6000 0x1000>;
+			interrupts = <GIC_SPI 102 0>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+				<&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c1_default>;
+			pinctrl-1 = <&blsp2_i2c1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_uart2: serial@75b1000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x075b1000 0x1000>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART3_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_i2c2: i2c@07577000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07577000 0x1000>;
+			interrupts = <GIC_SPI 97 0>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c2_default>;
+			pinctrl-1 = <&blsp1_i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_spi5: spi@075ba000{
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x075ba000 0x600>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_spi5_default>;
+			pinctrl-1 = <&blsp2_spi5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sdhc2: sdhci@74a4900 {
+			 status = "disabled";
+			 compatible = "qcom,sdhci-msm-v4";
+			 reg = <0x74a4900 0x314>, <0x74a4000 0x800>;
+			 reg-names = "hc_mem", "core_mem";
+
+			 interrupts = <0 125 0>, <0 221 0>;
+			 interrupt-names = "hc_irq", "pwr_irq";
+
+			 clock-names = "iface", "core", "xo";
+			 clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+			 <&gcc GCC_SDCC2_APPS_CLK>,
+			 <&xo_board>;
+			 bus-width = <4>;
+		 };
+
+		msmgpio: pinctrl@1010000 {
 			compatible = "qcom,msm8996-pinctrl";
 			reg = <0x01010000 0x300000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
@@ -239,7 +500,7 @@
 			      <0x400a000 0x002100>;
 			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 326 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
 			#address-cells = <2>;
@@ -266,4 +527,29 @@
 					       <825000000>;
 		};
 	};
+
+	adsp-smp2p {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 16 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
 };
+#include "msm8996-pins.dtsi"
diff --git a/src/arm64/qcom/pm8916.dtsi b/src/arm64/qcom/pm8916.dtsi
index f71679b15d54..53deebf9f515 100644
--- a/src/arm64/qcom/pm8916.dtsi
+++ b/src/arm64/qcom/pm8916.dtsi
@@ -91,9 +91,52 @@
 	};
 
 	pm8916_1: pm8916@1 {
-		compatible = "qcom,spmi-pmic";
+		compatible = "qcom,pm8916", "qcom,spmi-pmic";
 		reg = <0x1 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+                wcd_codec: codec@f000 {
+                       compatible = "qcom,pm8916-wcd-analog-codec";
+	               reg = <0xf000 0x200>;
+	               reg-names = "pmic-codec-core";
+	               clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
+	               clock-names = "mclk";
+	               interrupt-parent = <&spmi_bus>;
+	               interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
+	                            <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
+	                            <0x1 0xf0 0x2 IRQ_TYPE_NONE>,
+	                            <0x1 0xf0 0x3 IRQ_TYPE_NONE>,
+	                            <0x1 0xf0 0x4 IRQ_TYPE_NONE>,
+	                            <0x1 0xf0 0x5 IRQ_TYPE_NONE>,
+	                            <0x1 0xf0 0x6 IRQ_TYPE_NONE>,
+	                            <0x1 0xf0 0x7 IRQ_TYPE_NONE>,
+	                            <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
+	                            <0x1 0xf1 0x1 IRQ_TYPE_NONE>,
+	                            <0x1 0xf1 0x2 IRQ_TYPE_NONE>,
+	                            <0x1 0xf1 0x3 IRQ_TYPE_NONE>,
+	                            <0x1 0xf1 0x4 IRQ_TYPE_NONE>,
+	                            <0x1 0xf1 0x5 IRQ_TYPE_NONE>;
+	               interrupt-names = "cdc_spk_cnp_int",
+	                                 "cdc_spk_clip_int",
+	                                 "cdc_spk_ocp_int",
+	                                 "mbhc_ins_rem_det1",
+	                                 "mbhc_but_rel_det",
+	                                 "mbhc_but_press_det",
+	                                 "mbhc_ins_rem_det",
+	                                 "mbhc_switch_int",
+	                                 "cdc_ear_ocp_int",
+	                                 "cdc_hphr_ocp_int",
+	                                 "cdc_hphl_ocp_det",
+	                                 "cdc_ear_cnp_int",
+	                                 "cdc_hphr_cnp_int",
+	                                 "cdc_hphl_cnp_int";
+	               vdd-cdc-io-supply = <&pm8916_l5>;
+	               vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
+	               vdd-micbias-supply = <&pm8916_l13>;
+	               #sound-dai-cells = <1>;
+
+                };
+
 	};
 };
diff --git a/src/arm64/qcom/pm8994.dtsi b/src/arm64/qcom/pm8994.dtsi
index 1222d2e904f6..0f1866024ae3 100644
--- a/src/arm64/qcom/pm8994.dtsi
+++ b/src/arm64/qcom/pm8994.dtsi
@@ -29,6 +29,7 @@
 				     <0 0xcc 0 IRQ_TYPE_NONE>,
 				     <0 0xcd 0 IRQ_TYPE_NONE>,
 				     <0 0xce 0 IRQ_TYPE_NONE>,
+				     <0 0xcf 0 IRQ_TYPE_NONE>,
 				     <0 0xd0 0 IRQ_TYPE_NONE>,
 				     <0 0xd1 0 IRQ_TYPE_NONE>,
 				     <0 0xd2 0 IRQ_TYPE_NONE>,
diff --git a/src/arm64/renesas/r8a7795-h3ulcb.dts b/src/arm64/renesas/r8a7795-h3ulcb.dts
new file mode 100644
index 000000000000..dbea2c3d8f0c
--- /dev/null
+++ b/src/arm64/renesas/r8a7795-h3ulcb.dts
@@ -0,0 +1,371 @@
+/*
+ * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7795.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Renesas H3ULCB board based on r8a7795";
+	compatible = "renesas,h3ulcb", "renesas,r8a7795";
+
+	aliases {
+		serial0 = &scif2;
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led5 {
+			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+		};
+		led6 {
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-1 {
+			linux,code = <KEY_1>;
+			label = "SW3";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	x12_clk: x12 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	reg_1p8v: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	audio_clkout: audio-clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	rsnd_ak4613: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcpu>;
+		simple-audio-card,frame-master = <&sndcpu>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4613>;
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2_a";
+		function = "i2c2";
+	};
+
+	avb_pins: avb {
+		groups = "avb_mdc";
+		function = "avb";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data8", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <3300>;
+	};
+
+	sdhi2_pins_uhs: sd2_uhs {
+		groups = "sdhi2_data8", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound-clk {
+		groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
+			 "audio_clkout_a", "audio_clkout3_a";
+		function = "audio_clk";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	ak4613: codec@10 {
+		compatible = "asahi-kasei,ak4613";
+		#sound-dai-cells = <0>;
+		reg = <0x10>;
+		clocks = <&rcar_sound 3>;
+
+		asahi-kasei,in1-single-end;
+		asahi-kasei,in2-single-end;
+		asahi-kasei,out1-single-end;
+		asahi-kasei,out2-single-end;
+		asahi-kasei,out3-single-end;
+		asahi-kasei,out4-single-end;
+		asahi-kasei,out5-single-end;
+		asahi-kasei,out6-single-end;
+	};
+
+	cs2000: clk-multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x12_clk>;
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <11289600>;
+
+	status = "okay";
+
+	/* update <audio_clk_b> to <cs2000> */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&cs2000>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE R8A7795_CLK_S0D4>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0 &src0 &dvc0>;
+			capture  = <&ssi1 &src1 &dvc1>;
+		};
+	};
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&sdhi2 {
+	/* used for on-board 8bit eMMC */
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+&wdt0 {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		rxc-skew-ps = <900>;
+		rxdv-skew-ps = <0>;
+		rxd0-skew-ps = <0>;
+		rxd1-skew-ps = <0>;
+		rxd2-skew-ps = <0>;
+		rxd3-skew-ps = <0>;
+		txc-skew-ps = <900>;
+		txen-skew-ps = <0>;
+		txd0-skew-ps = <0>;
+		txd1-skew-ps = <0>;
+		txd2-skew-ps = <0>;
+		txd3-skew-ps = <0>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
diff --git a/src/arm64/renesas/r8a7795-salvator-x.dts b/src/arm64/renesas/r8a7795-salvator-x.dts
index 9f561c943f6f..bcaf4008d32d 100644
--- a/src/arm64/renesas/r8a7795-salvator-x.dts
+++ b/src/arm64/renesas/r8a7795-salvator-x.dts
@@ -62,7 +62,25 @@
 		clock-frequency = <24576000>;
 	};
 
-	vcc_sdhi0: regulator@1 {
+	reg_1p8v: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI0 Vcc";
@@ -73,7 +91,7 @@
 		enable-active-high;
 	};
 
-	vccq_sdhi0: regulator@2 {
+	vccq_sdhi0: regulator-vccq-sdhi0 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI0 VccQ";
@@ -86,7 +104,7 @@
 			  1800000 0>;
 	};
 
-	vcc_sdhi3: regulator@3 {
+	vcc_sdhi3: regulator-vcc-sdhi3 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI3 Vcc";
@@ -97,7 +115,7 @@
 		enable-active-high;
 	};
 
-	vccq_sdhi3: regulator@4 {
+	vccq_sdhi3: regulator-vccq-sdhi3 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI3 VccQ";
@@ -110,6 +128,17 @@
 			  1800000 0>;
 	};
 
+	vbus0_usb2: regulator-vbus0-usb2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB20_VBUS0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	audio_clkout: audio_clkout {
 		/*
 		 * This is same as <&rcar_sound 0>
@@ -135,6 +164,56 @@
 			sound-dai = <&ak4613>;
 		};
 	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+		port@3 {
+			lvds_connector: endpoint {
+			};
+		};
+	};
 };
 
 &extal_clk {
@@ -172,14 +251,45 @@
 		function = "avb";
 	};
 
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
+		function = "du";
+	};
+
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data8", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <3300>;
+	};
+
+	sdhi2_pins_uhs: sd2_uhs {
+		groups = "sdhi2_data8", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
 	};
 
 	sdhi3_pins: sd3 {
 		groups = "sdhi3_data4", "sdhi3_ctrl";
 		function = "sdhi3";
+		power-source = <3300>;
+	};
+
+	sdhi3_pins_uhs: sd3_uhs {
+		groups = "sdhi3_data4", "sdhi3_ctrl";
+		function = "sdhi3";
+		power-source = <1800>;
 	};
 
 	sound_pins: sound {
@@ -193,9 +303,26 @@
 		function = "audio_clk";
 	};
 
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
 	usb1_pins: usb1 {
-		groups = "usb1";
-		function = "usb1";
+		mux {
+			groups = "usb1";
+			function = "usb1";
+		};
+
+		ovc {
+			pins = "GP_6_27";
+			bias-pull-up;
+		};
+
+		pwen {
+			pins = "GP_6_26";
+			bias-pull-down;
+		};
 	};
 
 	usb2_pins: usb2 {
@@ -208,6 +335,7 @@
 	pinctrl-0 = <&scif1_pins>;
 	pinctrl-names = "default";
 
+	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -303,25 +431,42 @@
 
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
 
 	vmmc-supply = <&vcc_sdhi0>;
 	vqmmc-supply = <&vccq_sdhi0>;
 	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 	bus-width = <4>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&sdhi2 {
+	/* used for on-board 8bit eMMC */
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	non-removable;
 	status = "okay";
 };
 
 &sdhi3 {
 	pinctrl-0 = <&sdhi3_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdhi3_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
 
 	vmmc-supply = <&vcc_sdhi3>;
 	vqmmc-supply = <&vccq_sdhi3>;
 	cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
 	bus-width = <4>;
+	sd-uhs-sdr50;
 	status = "okay";
 };
 
@@ -329,6 +474,11 @@
 	shared-pin;
 };
 
+&wdt0 {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
 &audio_clk_a {
 	clock-frequency = <22579200>;
 };
@@ -363,6 +513,14 @@
 	status = "okay";
 };
 
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	vbus-supply = <&vbus0_usb2>;
+	status = "okay";
+};
+
 &usb2_phy1 {
 	pinctrl-0 = <&usb1_pins>;
 	pinctrl-names = "default";
@@ -377,6 +535,10 @@
 	status = "okay";
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &ehci1 {
 	status = "okay";
 };
@@ -385,6 +547,10 @@
 	status = "okay";
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &ohci1 {
 	status = "okay";
 };
@@ -393,6 +559,10 @@
 	status = "okay";
 };
 
+&hsusb {
+	status = "okay";
+};
+
 &pcie_bus_clk {
 	clock-frequency = <100000000>;
 	status = "okay";
diff --git a/src/arm64/renesas/r8a7795.dtsi b/src/arm64/renesas/r8a7795.dtsi
index 3285a9286786..bbf594bce930 100644
--- a/src/arm64/renesas/r8a7795.dtsi
+++ b/src/arm64/renesas/r8a7795.dtsi
@@ -53,6 +53,7 @@
 			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
 		};
+
 		a57_2: cpu@2 {
 			compatible = "arm,cortex-a57","arm,armv8";
 			reg = <0x2>;
@@ -61,6 +62,7 @@
 			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
 		};
+
 		a57_3: cpu@3 {
 			compatible = "arm,cortex-a57","arm,armv8";
 			reg = <0x3>;
@@ -69,20 +71,22 @@
 			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
 		};
-	};
 
-	L2_CA57: cache-controller@0 {
-		compatible = "cache";
-		power-domains = <&sysc R8A7795_PD_CA57_SCU>;
-		cache-unified;
-		cache-level = <2>;
-	};
+		L2_CA57: cache-controller@0 {
+			compatible = "cache";
+			reg = <0>;
+			power-domains = <&sysc R8A7795_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
 
-	L2_CA53: cache-controller@1 {
-		compatible = "cache";
-		power-domains = <&sysc R8A7795_PD_CA53_SCU>;
-		cache-unified;
-		cache-level = <2>;
+		L2_CA53: cache-controller@100 {
+			compatible = "cache";
+			reg = <0x100>;
+			power-domains = <&sysc R8A7795_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
 	};
 
 	extal_clk: extal {
@@ -151,19 +155,27 @@
 		#size-cells = <2>;
 		ranges;
 
-		gic: interrupt-controller@0xf1010000 {
+		gic: interrupt-controller@f1010000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
 			#address-cells = <0>;
 			interrupt-controller;
 			reg = <0x0 0xf1010000 0 0x1000>,
-			      <0x0 0xf1020000 0 0x2000>,
+			      <0x0 0xf1020000 0 0x20000>,
 			      <0x0 0xf1040000 0 0x20000>,
-			      <0x0 0xf1060000 0 0x2000>;
+			      <0x0 0xf1060000 0 0x20000>;
 			interrupts = <GIC_PPI 9
 					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
+		wdt0: watchdog@e6020000 {
+			compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
 		gpio0: gpio@e6050000 {
 			compatible = "renesas,gpio-r8a7795",
 				     "renesas,gpio-rcar";
@@ -309,6 +321,16 @@
 			#power-domain-cells = <0>;
 		};
 
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7795-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+
 		sysc: system-controller@e6180000 {
 			compatible = "renesas,r8a7795-sysc";
 			reg = <0 0xe6180000 0 0x0400>;
@@ -316,7 +338,8 @@
 		};
 
 		audma0: dma-controller@ec700000 {
-			compatible = "renesas,rcar-dmac";
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
 			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
 				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
@@ -348,7 +371,8 @@
 		};
 
 		audma1: dma-controller@ec720000 {
-			compatible = "renesas,rcar-dmac";
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
 			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
 				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
@@ -571,6 +595,30 @@
 			status = "disabled";
 		};
 
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a7795-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 914>,
+			       <&cpg CPG_CORE R8A7795_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
 		hscif0: serial@e6540000 {
 			compatible = "renesas,hscif-r8a7795",
 				     "renesas,rcar-gen3-hscif",
@@ -749,6 +797,8 @@
 			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 931>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>;
+			dma-names = "tx", "rx";
 			i2c-scl-internal-delay-ns = <110>;
 			status = "disabled";
 		};
@@ -761,6 +811,8 @@
 			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 930>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>;
+			dma-names = "tx", "rx";
 			i2c-scl-internal-delay-ns = <6>;
 			status = "disabled";
 		};
@@ -773,6 +825,8 @@
 			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 929>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>;
+			dma-names = "tx", "rx";
 			i2c-scl-internal-delay-ns = <6>;
 			status = "disabled";
 		};
@@ -785,6 +839,8 @@
 			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 928>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
 			i2c-scl-internal-delay-ns = <110>;
 			status = "disabled";
 		};
@@ -797,6 +853,8 @@
 			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 927>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
 			i2c-scl-internal-delay-ns = <110>;
 			status = "disabled";
 		};
@@ -809,6 +867,8 @@
 			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 919>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
 			i2c-scl-internal-delay-ns = <110>;
 			status = "disabled";
 		};
@@ -821,6 +881,8 @@
 			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 918>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
 			i2c-scl-internal-delay-ns = <6>;
 			status = "disabled";
 		};
@@ -874,63 +936,63 @@
 			status = "disabled";
 
 			rcar_sound,dvc {
-				dvc0: dvc@0 {
+				dvc0: dvc-0 {
 					dmas = <&audma0 0xbc>;
 					dma-names = "tx";
 				};
-				dvc1: dvc@1 {
+				dvc1: dvc-1 {
 					dmas = <&audma0 0xbe>;
 					dma-names = "tx";
 				};
 			};
 
 			rcar_sound,src {
-				src0: src@0 {
+				src0: src-0 {
 					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x85>, <&audma1 0x9a>;
 					dma-names = "rx", "tx";
 				};
-				src1: src@1 {
+				src1: src-1 {
 					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x87>, <&audma1 0x9c>;
 					dma-names = "rx", "tx";
 				};
-				src2: src@2 {
+				src2: src-2 {
 					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x89>, <&audma1 0x9e>;
 					dma-names = "rx", "tx";
 				};
-				src3: src@3 {
+				src3: src-3 {
 					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
 					dma-names = "rx", "tx";
 				};
-				src4: src@4 {
+				src4: src-4 {
 					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
 					dma-names = "rx", "tx";
 				};
-				src5: src@5 {
+				src5: src-5 {
 					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
 					dma-names = "rx", "tx";
 				};
-				src6: src@6 {
+				src6: src-6 {
 					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x91>, <&audma1 0xb4>;
 					dma-names = "rx", "tx";
 				};
-				src7: src@7 {
+				src7: src-7 {
 					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x93>, <&audma1 0xb6>;
 					dma-names = "rx", "tx";
 				};
-				src8: src@8 {
+				src8: src-8 {
 					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x95>, <&audma1 0xb8>;
 					dma-names = "rx", "tx";
 				};
-				src9: src@9 {
+				src9: src-9 {
 					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x97>, <&audma1 0xba>;
 					dma-names = "rx", "tx";
@@ -938,52 +1000,52 @@
 			};
 
 			rcar_sound,ssi {
-				ssi0: ssi@0 {
+				ssi0: ssi-0 {
 					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
-				ssi1: ssi@1 {
+				ssi1: ssi-1 {
 					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
-				ssi2: ssi@2 {
+				ssi2: ssi-2 {
 					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
-				ssi3: ssi@3 {
+				ssi3: ssi-3 {
 					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
-				ssi4: ssi@4 {
+				ssi4: ssi-4 {
 					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
-				ssi5: ssi@5 {
+				ssi5: ssi-5 {
 					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
-				ssi6: ssi@6 {
+				ssi6: ssi-6 {
 					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
-				ssi7: ssi@7 {
+				ssi7: ssi-7 {
 					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
-				ssi8: ssi@8 {
+				ssi8: ssi-8 {
 					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
-				ssi9: ssi@9 {
+				ssi9: ssi-9 {
 					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
 					dma-names = "rx", "tx", "rxu", "txu";
@@ -1048,6 +1110,7 @@
 			reg = <0 0xee100000 0 0x2000>;
 			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 314>;
+			max-frequency = <200000000>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
@@ -1057,6 +1120,7 @@
 			reg = <0 0xee120000 0 0x2000>;
 			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 313>;
+			max-frequency = <200000000>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
@@ -1066,8 +1130,8 @@
 			reg = <0 0xee140000 0 0x2000>;
 			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 312>;
+			max-frequency = <200000000>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-			cap-mmc-highspeed;
 			status = "disabled";
 		};
 
@@ -1076,8 +1140,8 @@
 			reg = <0 0xee160000 0 0x2000>;
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 311>;
+			max-frequency = <200000000>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-			cap-mmc-highspeed;
 			status = "disabled";
 		};
 
@@ -1174,6 +1238,23 @@
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a7795",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
 		pciec0: pcie@fe000000 {
 			compatible = "renesas,pcie-r8a7795";
 			reg = <0 0xfe000000 0 0x80000>;
@@ -1223,5 +1304,252 @@
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
+
+		vspbc: vsp@fe920000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe920000 0 0x8000>;
+			interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 624>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+
+			renesas,fcp = <&fcpvb1>;
+		};
+
+		fcpvb1: fcp@fe92f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe92f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 606>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		fcpf1: fcp@fe951000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe951000 0 0x200>;
+			clocks = <&cpg CPG_MOD 614>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		fcpf2: fcp@fe952000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe952000 0 0x200>;
+			clocks = <&cpg CPG_MOD 613>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		vspbd: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		vspi1: vsp@fe9b0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9b0000 0 0x8000>;
+			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 630>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+
+			renesas,fcp = <&fcpvi1>;
+		};
+
+		fcpvi1: fcp@fe9bf000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9bf000 0 0x200>;
+			clocks = <&cpg CPG_MOD 610>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		vspi2: vsp@fe9c0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9c0000 0 0x8000>;
+			interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 629>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+
+			renesas,fcp = <&fcpvi2>;
+		};
+
+		fcpvi2: fcp@fe9cf000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9cf000 0 0x200>;
+			clocks = <&cpg CPG_MOD 609>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x4000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x4000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		};
+
+		vspd2: vsp@fea30000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea30000 0 0x4000>;
+			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+
+			renesas,fcp = <&fcpvd2>;
+		};
+
+		fcpvd2: fcp@fea37000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea37000 0 0x200>;
+			clocks = <&cpg CPG_MOD 601>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		};
+
+		vspd3: vsp@fea38000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea38000 0 0x4000>;
+			interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 620>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+
+			renesas,fcp = <&fcpvd3>;
+		};
+
+		fcpvd3: fcp@fea3f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea3f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 600>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			renesas,fcp = <&fcpf0>;
+		};
+
+		fdp1@fe944000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe944000 0 0x2400>;
+			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 118>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			renesas,fcp = <&fcpf1>;
+		};
+
+		fdp1@fe948000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe948000 0 0x2400>;
+			interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 117>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			renesas,fcp = <&fcpf2>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7795";
+			reg = <0 0xfeb00000 0 0x80000>,
+			      <0 0xfeb90000 0 0x14>;
+			reg-names = "du", "lvds.0";
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>,
+				 <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 722>,
+				 <&cpg CPG_MOD 721>,
+				 <&cpg CPG_MOD 727>;
+			clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
+			status = "disabled";
+
+			vsps = <&vspd0 &vspd1 &vspd2 &vspd3>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_hdmi1: endpoint {
+					};
+				};
+				port@3 {
+					reg = <3>;
+					du_out_lvds0: endpoint {
+					};
+				};
+			};
+		};
 	};
 };
diff --git a/src/arm64/renesas/r8a7796-m3ulcb.dts b/src/arm64/renesas/r8a7796-m3ulcb.dts
new file mode 100644
index 000000000000..c3f064ac2cb4
--- /dev/null
+++ b/src/arm64/renesas/r8a7796-m3ulcb.dts
@@ -0,0 +1,189 @@
+/*
+ * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7796.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Renesas M3ULCB board based on r8a7796";
+	compatible = "renesas,m3ulcb", "renesas,r8a7796";
+
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led5 {
+			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+		};
+		led6 {
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-1 {
+			linux,code = <KEY_1>;
+			label = "SW3";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_1p8v: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data8", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <3300>;
+	};
+
+	sdhi2_pins_uhs: sd2_uhs {
+		groups = "sdhi2_data8", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&sdhi2 {
+	/* used for on-board 8bit eMMC */
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
+&wdt0 {
+	timeout-sec = <60>;
+	status = "okay";
+};
diff --git a/src/arm64/renesas/r8a7796-salvator-x.dts b/src/arm64/renesas/r8a7796-salvator-x.dts
new file mode 100644
index 000000000000..f35e96ca7d60
--- /dev/null
+++ b/src/arm64/renesas/r8a7796-salvator-x.dts
@@ -0,0 +1,226 @@
+/*
+ * Device Tree Source for the Salvator-X board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7796.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Renesas Salvator-X board based on r8a7796";
+	compatible = "renesas,salvator-x", "renesas,r8a7796";
+
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	reg_1p8v: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	vcc_sdhi3: regulator-vcc-sdhi3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI3 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi3: regulator-vccq-sdhi3 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI3 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2_a";
+		function = "i2c2";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data8", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <3300>;
+	};
+
+	sdhi2_pins_uhs: sd2_uhs {
+		groups = "sdhi2_data8", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	sdhi3_pins: sd3 {
+		groups = "sdhi3_data4", "sdhi3_ctrl";
+		function = "sdhi3";
+		power-source = <3300>;
+	};
+
+	sdhi3_pins_uhs: sd3_uhs {
+		groups = "sdhi3_data4", "sdhi3_ctrl";
+		function = "sdhi3";
+		power-source = <1800>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&sdhi2 {
+	/* used for on-board 8bit eMMC */
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&sdhi3 {
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-1 = <&sdhi3_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi3>;
+	vqmmc-supply = <&vccq_sdhi3>;
+	cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&wdt0 {
+	timeout-sec = <60>;
+	status = "okay";
+};
diff --git a/src/arm64/renesas/r8a7796.dtsi b/src/arm64/renesas/r8a7796.dtsi
new file mode 100644
index 000000000000..28ba59a00cd8
--- /dev/null
+++ b/src/arm64/renesas/r8a7796.dtsi
@@ -0,0 +1,515 @@
+/*
+ * Device Tree Source for the r8a7796 SoC
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/r8a7796-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a7796-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7796";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* 1 core only at this point */
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7796_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+		};
+
+		L2_CA57: cache-controller@0 {
+			compatible = "cache";
+			reg = <0>;
+			power-domains = <&sysc R8A7796_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <GIC_PPI 13
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		wdt0: watchdog@e6020000 {
+			compatible = "renesas,r8a7796-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a7796";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7796-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7796-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7796-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a7796",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7796",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a7796",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a7796",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		sdhi0: sd@ee100000 {
+			compatible = "renesas,sdhi-r8a7796";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		sdhi1: sd@ee120000 {
+			compatible = "renesas,sdhi-r8a7796";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		sdhi2: sd@ee140000 {
+			compatible = "renesas,sdhi-r8a7796";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		sdhi3: sd@ee160000 {
+			compatible = "renesas,sdhi-r8a7796";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/arm64/rockchip/rk3368-geekbox.dts b/src/arm64/rockchip/rk3368-geekbox.dts
index 46cdddfcea6c..e5eeca2c2456 100644
--- a/src/arm64/rockchip/rk3368-geekbox.dts
+++ b/src/arm64/rockchip/rk3368-geekbox.dts
@@ -116,7 +116,6 @@
 	cap-mmc-highspeed;
 	clock-frequency = <150000000>;
 	disable-wp;
-	keep-power-in-suspend;
 	non-removable;
 	num-slots = <1>;
 	vmmc-supply = <&vcc_io>;
@@ -258,8 +257,6 @@
 			};
 
 			vcc_sd: SWITCH_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
 				regulator-name = "vcc_sd";
 			};
 
diff --git a/src/arm64/rockchip/rk3368-orion-r68-meta.dts b/src/arm64/rockchip/rk3368-orion-r68-meta.dts
new file mode 100644
index 000000000000..ff5a40399d02
--- /dev/null
+++ b/src/arm64/rockchip/rk3368-orion-r68-meta.dts
@@ -0,0 +1,378 @@
+/*
+ * Copyright (c) 2016 Matthias Brugger <mbrugger@suse.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3368.dtsi"
+
+/ {
+	model = "Rockchip Orion R68";
+	compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key>;
+
+		power {
+			wakeup-source;
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		red {
+			gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+			label = "orion:red:led";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_ctl>;
+			default-state = "on";
+		};
+
+		blue {
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+			label = "orion:blue:led";
+			pinctrl-names = "default";
+			pinctrl-0 = <&stby_pwren>;
+			default-state = "off";
+		};
+	};
+
+	vcc_18: vcc18-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	/* supplies both host and otg */
+	vcc_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 4 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_io: vcc-io-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_lan: vcc-lan-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_lan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sd: vcc-sd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sd";
+		gpio = <&gpio3 11 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vccio_sd: vcc-io-sd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name= "vccio_sd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vccio_wl: vccio-wl-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_wl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vdd_10: vdd-10-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_10";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	mmc-hs200-1_2v;
+	mmc-hs200-1_8v;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 12 0>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "ok";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-enable-ramp-delay = <300>;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <8000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		/* rtc_int is not connected */
+	};
+};
+
+&pinctrl {
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		bias-disable;
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	emmc {
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+		};
+
+		emmc-clk {
+			rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+		};
+
+		emmc-cmd {
+			rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+		};
+
+		emmc_reset: emmc-reset {
+			rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		stby_pwren: stby-pwren {
+			rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		led_ctl: led-ctl {
+			rockchip,pins = <3 29 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <2 9 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_cd: sdmmc-cd {
+			rockchip,pins = <2 11 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_bus1: sdmmc-bus1 {
+			rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<2 6 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<2 7 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<2 8 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	clock-frequency = <50000000>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_xfer>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/src/arm64/rockchip/rk3368-px5-evb.dts b/src/arm64/rockchip/rk3368-px5-evb.dts
new file mode 100644
index 000000000000..85f7a243d744
--- /dev/null
+++ b/src/arm64/rockchip/rk3368-px5-evb.dts
@@ -0,0 +1,314 @@
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3368.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Rockchip PX5 EVB";
+	compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
+
+	chosen {
+		stdout-path = "serial4:115200n8";
+	};
+
+	memory@0 {
+		reg = <0x0 0x0 0x0 0x80000000>;
+		device_type = "memory";
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key>;
+
+		power {
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&emmc {
+	status = "okay";
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	clock-frequency = <150000000>;
+	disable-wp;
+	keep-power-in-suspend;
+	mmc-hs200-1_8v;
+	no-sdio;
+	no-sd;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc18_flash>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_io>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		#clock-cells = <1>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd_cpu";
+			};
+
+			vdd_log: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd_log";
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+			};
+
+			vcc18_flash: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_flash";
+			};
+
+			vcca_33: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_33";
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+			};
+
+			avdd_33: LDO_REG4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "avdd_33";
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd10_lcd";
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+			};
+
+			vcc18_lcd: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+			};
+
+			vcc_sd: SWITCH_REG1 {
+				regulator-name = "vcc_sd";
+			};
+
+			vcc33_lcd: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc33_lcd";
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	accelerometer@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	gsl1680: touchscreen@40 {
+		compatible = "silead,gsl1680";
+		reg = <0x40>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+		power-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <1280>;
+		silead,max-fingers = <5>;
+	};
+};
+
+&pinctrl {
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_sleep: pmic-sleep {
+			rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&sdmmc {
+	status = "okay";
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	no-emmc;
+	no-sdio;
+	num-slots = <1>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_bus4>, <&sdmmc_cd>;
+	rockchip,default-sample-phase = <90>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+};
+
+&tsadc {
+	status = "okay";
+	rockchip,hw-tshut-mode = <0>; /* CRU */
+	rockchip,hw-tshut-polarity = <1>; /* high */
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/src/arm64/rockchip/rk3368-r88.dts b/src/arm64/rockchip/rk3368-r88.dts
index b56b7205e39b..eed1ef6669ff 100644
--- a/src/arm64/rockchip/rk3368-r88.dts
+++ b/src/arm64/rockchip/rk3368-r88.dts
@@ -236,10 +236,18 @@
 	};
 };
 
+&io_domains {
+	status = "ok";
+
+	audio-supply = <&vcc_io>;
+	gpio30-supply = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
+	wifi-supply = <&vccio_wl>;
+};
+
 &sdio0 {
 	assigned-clocks = <&cru SCLK_SDIO0>;
 	assigned-clock-parents = <&cru PLL_CPLL>;
-	broken-cd;
 	bus-width = <4>;
 	cap-sd-highspeed;
 	cap-sdio-irq;
@@ -329,6 +337,13 @@
 	};
 };
 
+&pmu_io_domains {
+	status = "okay";
+
+	pmu-supply = <&vcc_io>;
+	vop-supply = <&vcc_io>;
+};
+
 &saradc {
 	vref-supply = <&vcc_18>;
 	status = "okay";
diff --git a/src/arm64/rockchip/rk3368.dtsi b/src/arm64/rockchip/rk3368.dtsi
index 8b4a7c9154e9..a635adc47e74 100644
--- a/src/arm64/rockchip/rk3368.dtsi
+++ b/src/arm64/rockchip/rk3368.dtsi
@@ -45,6 +45,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -230,7 +231,7 @@
 	sdmmc: dwmmc@ff0c0000 {
 		compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff0c0000 0x0 0x4000>;
-		clock-freq-min-max = <400000 150000000>;
+		max-frequency = <150000000>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
@@ -242,7 +243,7 @@
 	sdio0: dwmmc@ff0d0000 {
 		compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff0d0000 0x0 0x4000>;
-		clock-freq-min-max = <400000 150000000>;
+		max-frequency = <150000000>;
 		clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
 			 <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
@@ -254,7 +255,7 @@
 	emmc: dwmmc@ff0f0000 {
 		compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff0f0000 0x0 0x4000>;
-		clock-freq-min-max = <400000 150000000>;
+		max-frequency = <150000000>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
@@ -270,6 +271,8 @@
 		#io-channel-cells = <1>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};
 
@@ -312,16 +315,16 @@
 		status = "disabled";
 	};
 
-	i2c1: i2c@ff140000 {
+	i2c2: i2c@ff140000 {
 		compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
 		reg = <0x0 0xff140000 0x0 0x1000>;
 		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clock-names = "i2c";
-		clocks = <&cru PCLK_I2C1>;
+		clocks = <&cru PCLK_I2C2>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_xfer>;
+		pinctrl-0 = <&i2c2_xfer>;
 		status = "disabled";
 	};
 
@@ -534,7 +537,6 @@
 		g-np-tx-fifo-size = <16>;
 		g-rx-fifo-size = <275>;
 		g-tx-fifo-size = <256 128 128 64 64 32>;
-		g-use-dma;
 		status = "disabled";
 	};
 
@@ -551,16 +553,16 @@
 		status = "disabled";
 	};
 
-	i2c2: i2c@ff660000 {
+	i2c1: i2c@ff660000 {
 		compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
 		reg = <0x0 0xff660000 0x0 0x1000>;
 		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clock-names = "i2c";
-		clocks = <&cru PCLK_I2C2>;
+		clocks = <&cru PCLK_I2C1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_xfer>;
+		pinctrl-0 = <&i2c1_xfer>;
 		status = "disabled";
 	};
 
@@ -632,8 +634,22 @@
 	};
 
 	pmugrf: syscon@ff738000 {
-		compatible = "rockchip,rk3368-pmugrf", "syscon";
+		compatible = "rockchip,rk3368-pmugrf", "syscon", "simple-mfd";
 		reg = <0x0 0xff738000 0x0 0x1000>;
+
+		pmu_io_domains: io-domains {
+			compatible = "rockchip,rk3368-pmu-io-voltage-domain";
+			status = "disabled";
+		};
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x200>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+			mode-bootloader = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+		};
 	};
 
 	cru: clock-controller@ff760000 {
@@ -645,8 +661,13 @@
 	};
 
 	grf: syscon@ff770000 {
-		compatible = "rockchip,rk3368-grf", "syscon";
+		compatible = "rockchip,rk3368-grf", "syscon", "simple-mfd";
 		reg = <0x0 0xff770000 0x0 0x1000>;
+
+		io_domains: io-domains {
+			compatible = "rockchip,rk3368-io-voltage-domain";
+			status = "disabled";
+		};
 	};
 
 	wdt: watchdog@ff800000 {
@@ -670,7 +691,7 @@
 		#address-cells = <0>;
 
 		reg = <0x0 0xffb71000 0x0 0x1000>,
-		      <0x0 0xffb72000 0x0 0x1000>,
+		      <0x0 0xffb72000 0x0 0x2000>,
 		      <0x0 0xffb74000 0x0 0x2000>,
 		      <0x0 0xffb76000 0x0 0x2000>;
 		interrupts = <GIC_PPI 9
diff --git a/src/arm64/rockchip/rk3399-evb.dts b/src/arm64/rockchip/rk3399-evb.dts
index 1a3eb1482050..3040a989d699 100644
--- a/src/arm64/rockchip/rk3399-evb.dts
+++ b/src/arm64/rockchip/rk3399-evb.dts
@@ -49,6 +49,53 @@
 	compatible = "rockchip,rk3399-evb", "rockchip,rk3399",
 		     "google,rk3399evb-rev2";
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <200>;
+		enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
 	vdd_center: vdd-center {
 		compatible = "pwm-regulator";
 		pwms = <&pwm3 0 25000 0>;
@@ -69,12 +116,59 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		vin-supply = <&vcc5v0_sys>;
+	};
+
 	vcc_phy: vcc-phy-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_phy";
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 15 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
 };
 
 &pwm0 {
@@ -89,6 +183,44 @@
 	status = "okay";
 };
 
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "disabled";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn>;
+	status = "disabled";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
 &uart2 {
 	status = "okay";
 };
@@ -121,4 +253,11 @@
 				<1 18 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins =
+				<4 25 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
diff --git a/src/arm64/rockchip/rk3399.dtsi b/src/arm64/rockchip/rk3399.dtsi
index d7f8e06910bc..c928015d39a2 100644
--- a/src/arm64/rockchip/rk3399.dtsi
+++ b/src/arm64/rockchip/rk3399.dtsi
@@ -45,6 +45,8 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3399-power.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "rockchip,rk3399";
@@ -54,6 +56,15 @@
 	#size-cells = <2>;
 
 	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -142,6 +153,16 @@
 		};
 	};
 
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
+	};
+
+	pmu_a72 {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -149,10 +170,11 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
+		arm,no-tick-in-suspend;
 	};
 
 	xin24m: xin24m {
@@ -171,8 +193,8 @@
 		dmac_bus: dma-controller@ff6d0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x0 0xff6d0000 0x0 0x4000>;
-			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
 			#dma-cells = <1>;
 			clocks = <&cru ACLK_DMAC0_PERILP>;
 			clock-names = "apb_pclk";
@@ -181,20 +203,40 @@
 		dmac_peri: dma-controller@ff6e0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x0 0xff6e0000 0x0 0x4000>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>;
 			#dma-cells = <1>;
 			clocks = <&cru ACLK_DMAC1_PERILP>;
 			clock-names = "apb_pclk";
 		};
 	};
 
+	gmac: ethernet@fe300000 {
+		compatible = "rockchip,rk3399-gmac";
+		reg = <0x0 0xfe300000 0x0 0x10000>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "macirq";
+		clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>,
+			 <&cru SCLK_MAC_TX>, <&cru SCLK_MACREF>,
+			 <&cru SCLK_MACREF_OUT>, <&cru ACLK_GMAC>,
+			 <&cru PCLK_GMAC>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_ref",
+			      "clk_mac_refout", "aclk_mac",
+			      "pclk_mac";
+		power-domains = <&power RK3399_PD_GMAC>;
+		resets = <&cru SRST_A_GMAC>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
 	sdio0: dwmmc@fe310000 {
 		compatible = "rockchip,rk3399-dw-mshc",
 			     "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xfe310000 0x0 0x4000>;
-		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-		clock-freq-min-max = <400000 150000000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>;
+		max-frequency = <150000000>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
@@ -206,28 +248,90 @@
 		compatible = "rockchip,rk3399-dw-mshc",
 			     "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xfe320000 0x0 0x4000>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-		clock-freq-min-max = <400000 150000000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>;
+		max-frequency = <150000000>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
+		power-domains = <&power RK3399_PD_SD>;
 		status = "disabled";
 	};
 
+	sdhci: sdhci@fe330000 {
+		compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
+		reg = <0x0 0xfe330000 0x0 0x10000>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>;
+		arasan,soc-ctl-syscon = <&grf>;
+		assigned-clocks = <&cru SCLK_EMMC>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
+		clock-names = "clk_xin", "clk_ahb";
+		clock-output-names = "emmc_cardclock";
+		#clock-cells = <0>;
+		phys = <&emmc_phy>;
+		phy-names = "phy_arasan";
+		power-domains = <&power RK3399_PD_EMMC>;
+		status = "disabled";
+	};
+
+	pcie0: pcie@f8000000 {
+		compatible = "rockchip,rk3399-pcie";
+		reg = <0x0 0xf8000000 0x0 0x2000000>,
+		      <0x0 0xfd000000 0x0 0x1000000>;
+		reg-names = "axi-base", "apb-base";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		bus-range = <0x0 0x1>;
+		clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
+			 <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
+		clock-names = "aclk", "aclk-perf",
+			      "hclk", "pm";
+		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "sys", "legacy", "client";
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+				<0 0 0 2 &pcie0_intc 1>,
+				<0 0 0 3 &pcie0_intc 2>,
+				<0 0 0 4 &pcie0_intc 3>;
+		msi-map = <0x0 &its 0x0 0x1000>;
+		phys = <&pcie_phy>;
+		phy-names = "pcie-phy";
+		ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000
+			  0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>;
+		resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
+			 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
+			 <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
+			 <&cru SRST_A_PCIE>;
+		reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+			      "pm", "pclk", "aclk";
+		status = "disabled";
+
+		pcie0_intc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
 	usb_host0_ehci: usb@fe380000 {
 		compatible = "generic-ehci";
 		reg = <0x0 0xfe380000 0x0 0x20000>;
-		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>;
 		clock-names = "hclk_host0", "hclk_host0_arb";
+		phys = <&u2phy0_host>;
+		phy-names = "usb";
 		status = "disabled";
 	};
 
 	usb_host0_ohci: usb@fe3a0000 {
 		compatible = "generic-ohci";
 		reg = <0x0 0xfe3a0000 0x0 0x20000>;
-		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>;
 		clock-names = "hclk_host0", "hclk_host0_arb";
 		status = "disabled";
@@ -236,16 +340,18 @@
 	usb_host1_ehci: usb@fe3c0000 {
 		compatible = "generic-ehci";
 		reg = <0x0 0xfe3c0000 0x0 0x20000>;
-		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>;
 		clock-names = "hclk_host1", "hclk_host1_arb";
+		phys = <&u2phy1_host>;
+		phy-names = "usb";
 		status = "disabled";
 	};
 
 	usb_host1_ohci: usb@fe3e0000 {
 		compatible = "generic-ohci";
 		reg = <0x0 0xfe3e0000 0x0 0x20000>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>;
 		clock-names = "hclk_host1", "hclk_host1_arb";
 		status = "disabled";
@@ -253,7 +359,7 @@
 
 	gic: interrupt-controller@fee00000 {
 		compatible = "arm,gic-v3";
-		#interrupt-cells = <3>;
+		#interrupt-cells = <4>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -264,12 +370,124 @@
 		      <0x0 0xfff00000 0 0x10000>, /* GICC */
 		      <0x0 0xfff10000 0 0x10000>, /* GICH */
 		      <0x0 0xfff20000 0 0x10000>; /* GICV */
-		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
 		its: interrupt-controller@fee20000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			reg = <0x0 0xfee20000 0x0 0x20000>;
 		};
+
+		ppi-partitions {
+			ppi_cluster0: interrupt-partition-0 {
+				affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>;
+			};
+
+			ppi_cluster1: interrupt-partition-1 {
+				affinity = <&cpu_b0 &cpu_b1>;
+			};
+		};
+	};
+
+	saradc: saradc@ff100000 {
+		compatible = "rockchip,rk3399-saradc";
+		reg = <0x0 0xff100000 0x0 0x100>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_P_SARADC>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	i2c1: i2c@ff110000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff110000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C1>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ff120000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff120000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C2>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ff130000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff130000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C3>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@ff140000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff140000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C5>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C5>, <&cru PCLK_I2C5>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c5_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@ff150000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff150000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C6>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C6>, <&cru PCLK_I2C6>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c6_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@ff160000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff160000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C7>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C7>, <&cru PCLK_I2C7>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c7_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
 	};
 
 	uart0: serial@ff180000 {
@@ -277,7 +495,7 @@
 		reg = <0x0 0xff180000 0x0 0x100>;
 		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
 		clock-names = "baudclk", "apb_pclk";
-		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
 		pinctrl-names = "default";
@@ -290,7 +508,7 @@
 		reg = <0x0 0xff190000 0x0 0x100>;
 		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
 		clock-names = "baudclk", "apb_pclk";
-		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
 		pinctrl-names = "default";
@@ -303,7 +521,7 @@
 		reg = <0x0 0xff1a0000 0x0 0x100>;
 		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
 		clock-names = "baudclk", "apb_pclk";
-		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
 		pinctrl-names = "default";
@@ -316,7 +534,7 @@
 		reg = <0x0 0xff1b0000 0x0 0x100>;
 		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
 		clock-names = "baudclk", "apb_pclk";
-		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
 		pinctrl-names = "default";
@@ -329,7 +547,7 @@
 		reg = <0x0 0xff1c0000 0x0 0x1000>;
 		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
 		clock-names = "spiclk", "apb_pclk";
-		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
 		#address-cells = <1>;
@@ -342,7 +560,7 @@
 		reg = <0x0 0xff1d0000 0x0 0x1000>;
 		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
 		clock-names = "spiclk", "apb_pclk";
-		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
 		#address-cells = <1>;
@@ -355,7 +573,7 @@
 		reg = <0x0 0xff1e0000 0x0 0x1000>;
 		clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
 		clock-names = "spiclk", "apb_pclk";
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
 		#address-cells = <1>;
@@ -368,7 +586,7 @@
 		reg = <0x0 0xff1f0000 0x0 0x1000>;
 		clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>;
 		clock-names = "spiclk", "apb_pclk";
-		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>;
 		#address-cells = <1>;
@@ -381,7 +599,7 @@
 		reg = <0x0 0xff200000 0x0 0x1000>;
 		clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>;
 		clock-names = "spiclk", "apb_pclk";
-		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>;
 		#address-cells = <1>;
@@ -389,9 +607,324 @@
 		status = "disabled";
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu {
+			polling-delay-passive = <100>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_alert1: cpu_alert1 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu_crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device =
+						<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu {
+			polling-delay-passive = <100>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsadc 1>;
+
+			trips {
+				gpu_alert0: gpu_alert0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				gpu_crit: gpu_crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device =
+						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	tsadc: tsadc@ff260000 {
+		compatible = "rockchip,rk3399-tsadc";
+		reg = <0x0 0xff260000 0x0 0x100>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>;
+		assigned-clocks = <&cru SCLK_TSADC>;
+		assigned-clock-rates = <750000>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		rockchip,grf = <&grf>;
+		rockchip,hw-tshut-temp = <95000>;
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_gpio>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_gpio>;
+		#thermal-sensor-cells = <1>;
+		status = "disabled";
+	};
+
+	qos_sd: qos@ffa74000 {
+		compatible = "syscon";
+		reg = <0x0 0xffa74000 0x0 0x20>;
+	};
+
+	qos_emmc: qos@ffa58000 {
+		compatible = "syscon";
+		reg = <0x0 0xffa58000 0x0 0x20>;
+	};
+
+	qos_gmac: qos@ffa5c000 {
+		compatible = "syscon";
+		reg = <0x0 0xffa5c000 0x0 0x20>;
+	};
+
+	qos_hdcp: qos@ffa90000 {
+		compatible = "syscon";
+		reg = <0x0 0xffa90000 0x0 0x20>;
+	};
+
+	qos_iep: qos@ffa98000 {
+		compatible = "syscon";
+		reg = <0x0 0xffa98000 0x0 0x20>;
+	};
+
+	qos_isp0_m0: qos@ffaa0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffaa0000 0x0 0x20>;
+	};
+
+	qos_isp0_m1: qos@ffaa0080 {
+		compatible = "syscon";
+		reg = <0x0 0xffaa0080 0x0 0x20>;
+	};
+
+	qos_isp1_m0: qos@ffaa8000 {
+		compatible = "syscon";
+		reg = <0x0 0xffaa8000 0x0 0x20>;
+	};
+
+	qos_isp1_m1: qos@ffaa8080 {
+		compatible = "syscon";
+		reg = <0x0 0xffaa8080 0x0 0x20>;
+	};
+
+	qos_rga_r: qos@ffab0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffab0000 0x0 0x20>;
+	};
+
+	qos_rga_w: qos@ffab0080 {
+		compatible = "syscon";
+		reg = <0x0 0xffab0080 0x0 0x20>;
+	};
+
+	qos_video_m0: qos@ffab8000 {
+		compatible = "syscon";
+		reg = <0x0 0xffab8000 0x0 0x20>;
+	};
+
+	qos_video_m1_r: qos@ffac0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffac0000 0x0 0x20>;
+	};
+
+	qos_video_m1_w: qos@ffac0080 {
+		compatible = "syscon";
+		reg = <0x0 0xffac0080 0x0 0x20>;
+	};
+
+	qos_vop_big_r: qos@ffac8000 {
+		compatible = "syscon";
+		reg = <0x0 0xffac8000 0x0 0x20>;
+	};
+
+	qos_vop_big_w: qos@ffac8080 {
+		compatible = "syscon";
+		reg = <0x0 0xffac8080 0x0 0x20>;
+	};
+
+	qos_vop_little: qos@ffad0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffad0000 0x0 0x20>;
+	};
+
+	qos_gpu: qos@ffae0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffae0000 0x0 0x20>;
+	};
+
+	pmu: power-management@ff310000 {
+		compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd";
+		reg = <0x0 0xff310000 0x0 0x1000>;
+
+		/*
+		 * Note: RK3399 supports 6 voltage domains including VD_CORE_L,
+		 * VD_CORE_B, VD_CENTER, VD_GPU, VD_LOGIC and VD_PMU.
+		 * Some of the power domains are grouped together for every
+		 * voltage domain.
+		 * The detail contents as below.
+		 */
+		power: power-controller {
+			compatible = "rockchip,rk3399-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* These power domains are grouped by VD_CENTER */
+			pd_iep@RK3399_PD_IEP {
+				reg = <RK3399_PD_IEP>;
+				clocks = <&cru ACLK_IEP>,
+					 <&cru HCLK_IEP>;
+				pm_qos = <&qos_iep>;
+			};
+			pd_rga@RK3399_PD_RGA {
+				reg = <RK3399_PD_RGA>;
+				clocks = <&cru ACLK_RGA>,
+					 <&cru HCLK_RGA>;
+				pm_qos = <&qos_rga_r>,
+					 <&qos_rga_w>;
+			};
+			pd_vcodec@RK3399_PD_VCODEC {
+				reg = <RK3399_PD_VCODEC>;
+				clocks = <&cru ACLK_VCODEC>,
+					 <&cru HCLK_VCODEC>;
+				pm_qos = <&qos_video_m0>;
+			};
+			pd_vdu@RK3399_PD_VDU {
+				reg = <RK3399_PD_VDU>;
+				clocks = <&cru ACLK_VDU>,
+					 <&cru HCLK_VDU>;
+				pm_qos = <&qos_video_m1_r>,
+					 <&qos_video_m1_w>;
+			};
+
+			/* These power domains are grouped by VD_GPU */
+			pd_gpu@RK3399_PD_GPU {
+				reg = <RK3399_PD_GPU>;
+				clocks = <&cru ACLK_GPU>;
+				pm_qos = <&qos_gpu>;
+			};
+
+			/* These power domains are grouped by VD_LOGIC */
+			pd_emmc@RK3399_PD_EMMC {
+				reg = <RK3399_PD_EMMC>;
+				clocks = <&cru ACLK_EMMC>;
+				pm_qos = <&qos_emmc>;
+			};
+			pd_gmac@RK3399_PD_GMAC {
+				reg = <RK3399_PD_GMAC>;
+				clocks = <&cru ACLK_GMAC>,
+					 <&cru PCLK_GMAC>;
+				pm_qos = <&qos_gmac>;
+			};
+			pd_sd@RK3399_PD_SD {
+				reg = <RK3399_PD_SD>;
+				clocks = <&cru HCLK_SDMMC>,
+					 <&cru SCLK_SDMMC>;
+				pm_qos = <&qos_sd>;
+			};
+			pd_vio@RK3399_PD_VIO {
+				reg = <RK3399_PD_VIO>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pd_hdcp@RK3399_PD_HDCP {
+					reg = <RK3399_PD_HDCP>;
+					clocks = <&cru ACLK_HDCP>,
+						 <&cru HCLK_HDCP>,
+						 <&cru PCLK_HDCP>;
+					pm_qos = <&qos_hdcp>;
+				};
+				pd_isp0@RK3399_PD_ISP0 {
+					reg = <RK3399_PD_ISP0>;
+					clocks = <&cru ACLK_ISP0>,
+						 <&cru HCLK_ISP0>;
+					pm_qos = <&qos_isp0_m0>,
+						 <&qos_isp0_m1>;
+				};
+				pd_isp1@RK3399_PD_ISP1 {
+					reg = <RK3399_PD_ISP1>;
+					clocks = <&cru ACLK_ISP1>,
+						 <&cru HCLK_ISP1>;
+					pm_qos = <&qos_isp1_m0>,
+						 <&qos_isp1_m1>;
+				};
+				pd_tcpc0@RK3399_PD_TCPC0 {
+					reg = <RK3399_PD_TCPD0>;
+					clocks = <&cru SCLK_UPHY0_TCPDCORE>,
+						 <&cru SCLK_UPHY0_TCPDPHY_REF>;
+				};
+				pd_tcpc1@RK3399_PD_TCPC1 {
+					reg = <RK3399_PD_TCPD1>;
+					clocks = <&cru SCLK_UPHY1_TCPDCORE>,
+						 <&cru SCLK_UPHY1_TCPDPHY_REF>;
+				};
+				pd_vo@RK3399_PD_VO {
+					reg = <RK3399_PD_VO>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pd_vopb@RK3399_PD_VOPB {
+						reg = <RK3399_PD_VOPB>;
+						clocks = <&cru ACLK_VOP0>,
+							 <&cru HCLK_VOP0>;
+						pm_qos = <&qos_vop_big_r>,
+							 <&qos_vop_big_w>;
+					};
+					pd_vopl@RK3399_PD_VOPL {
+						reg = <RK3399_PD_VOPL>;
+						clocks = <&cru ACLK_VOP1>,
+							 <&cru HCLK_VOP1>;
+						pm_qos = <&qos_vop_little>;
+					};
+				};
+			};
+		};
+	};
+
 	pmugrf: syscon@ff320000 {
-		compatible = "rockchip,rk3399-pmugrf", "syscon";
+		compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
 		reg = <0x0 0xff320000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		pmu_io_domains: io-domains {
+			compatible = "rockchip,rk3399-pmu-io-voltage-domain";
+			status = "disabled";
+		};
 	};
 
 	spi3: spi@ff350000 {
@@ -399,7 +932,7 @@
 		reg = <0x0 0xff350000 0x0 0x1000>;
 		clocks = <&pmucru SCLK_SPI3_PMU>, <&pmucru PCLK_SPI3_PMU>;
 		clock-names = "spiclk", "apb_pclk";
-		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi3_clk &spi3_tx &spi3_rx &spi3_cs0>;
 		#address-cells = <1>;
@@ -412,7 +945,7 @@
 		reg = <0x0 0xff370000 0x0 0x100>;
 		clocks = <&pmucru SCLK_UART4_PMU>, <&pmucru PCLK_UART4_PMU>;
 		clock-names = "baudclk", "apb_pclk";
-		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
 		pinctrl-names = "default";
@@ -420,6 +953,51 @@
 		status = "disabled";
 	};
 
+	i2c0: i2c@ff3c0000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff3c0000 0x0 0x1000>;
+		assigned-clocks = <&pmucru SCLK_I2C0_PMU>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&pmucru SCLK_I2C0_PMU>, <&pmucru PCLK_I2C0_PMU>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@ff3d0000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff3d0000 0x0 0x1000>;
+		assigned-clocks = <&pmucru SCLK_I2C4_PMU>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&pmucru SCLK_I2C4_PMU>, <&pmucru PCLK_I2C4_PMU>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c4_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@ff3e0000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff3e0000 0x0 0x1000>;
+		assigned-clocks = <&pmucru SCLK_I2C8_PMU>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&pmucru SCLK_I2C8_PMU>, <&pmucru PCLK_I2C8_PMU>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c8_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	pwm0: pwm@ff420000 {
 		compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
 		reg = <0x0 0xff420000 0x0 0x10>;
@@ -464,6 +1042,38 @@
 		status = "disabled";
 	};
 
+	efuse0: efuse@ff690000 {
+		compatible = "rockchip,rk3399-efuse";
+		reg = <0x0 0xff690000 0x0 0x80>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&cru PCLK_EFUSE1024NS>;
+		clock-names = "pclk_efuse";
+
+		/* Data cells */
+		cpu_id: cpu-id@7 {
+			reg = <0x07 0x10>;
+		};
+		cpub_leakage: cpu-leakage@17 {
+			reg = <0x17 0x1>;
+		};
+		gpu_leakage: gpu-leakage@18 {
+			reg = <0x18 0x1>;
+		};
+		center_leakage: center-leakage@19 {
+			reg = <0x19 0x1>;
+		};
+		cpul_leakage: cpu-leakage@1a {
+			reg = <0x1a 0x1>;
+		};
+		logic_leakage: logic-leakage@1b {
+			reg = <0x1b 0x1>;
+		};
+		wafer_info: wafer-info@1c {
+			reg = <0x1c 0x1>;
+		};
+	};
+
 	pmucru: pmu-clock-controller@ff750000 {
 		compatible = "rockchip,rk3399-pmucru";
 		reg = <0x0 0xff750000 0x0 0x1000>;
@@ -478,24 +1088,186 @@
 		reg = <0x0 0xff760000 0x0 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
+		assigned-clocks =
+			<&cru PLL_GPLL>, <&cru PLL_CPLL>,
+			<&cru PLL_NPLL>,
+			<&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
+			<&cru PCLK_PERIHP>,
+			<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
+			<&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
+			<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>;
+		assigned-clock-rates =
+			 <594000000>,  <800000000>,
+			<1000000000>,
+			 <150000000>,   <75000000>,
+			  <37500000>,
+			 <100000000>,  <100000000>,
+			  <50000000>, <600000000>,
+			 <100000000>,   <50000000>;
 	};
 
 	grf: syscon@ff770000 {
-		compatible = "rockchip,rk3399-grf", "syscon";
+		compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
 		reg = <0x0 0xff770000 0x0 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		io_domains: io-domains {
+			compatible = "rockchip,rk3399-io-voltage-domain";
+			status = "disabled";
+		};
+
+		u2phy0: usb2-phy@e450 {
+			compatible = "rockchip,rk3399-usb2phy";
+			reg = <0xe450 0x10>;
+			clocks = <&cru SCLK_USB2PHY0_REF>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			clock-output-names = "clk_usbphy0_480m";
+			status = "disabled";
+
+			u2phy0_host: host-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupt-names = "linestate";
+				status = "disabled";
+			};
+
+			u2phy0_otg: otg-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				status = "disabled";
+			};
+		};
+
+		u2phy1: usb2-phy@e460 {
+			compatible = "rockchip,rk3399-usb2phy";
+			reg = <0xe460 0x10>;
+			clocks = <&cru SCLK_USB2PHY1_REF>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			clock-output-names = "clk_usbphy1_480m";
+			status = "disabled";
+
+			u2phy1_host: host-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupt-names = "linestate";
+				status = "disabled";
+			};
+
+			u2phy1_otg: otg-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				status = "disabled";
+			};
+		};
+
+		emmc_phy: phy@f780 {
+			compatible = "rockchip,rk3399-emmc-phy";
+			reg = <0xf780 0x24>;
+			clocks = <&sdhci>;
+			clock-names = "emmcclk";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie_phy: pcie-phy {
+			compatible = "rockchip,rk3399-pcie-phy";
+			clocks = <&cru SCLK_PCIEPHY_REF>;
+			clock-names = "refclk";
+			#phy-cells = <0>;
+			resets = <&cru SRST_PCIEPHY>;
+			reset-names = "phy";
+			status = "disabled";
+		};
+	};
+
+	tcphy0: phy@ff7c0000 {
+		compatible = "rockchip,rk3399-typec-phy";
+		reg = <0x0 0xff7c0000 0x0 0x40000>;
+		clocks = <&cru SCLK_UPHY0_TCPDCORE>,
+			 <&cru SCLK_UPHY0_TCPDPHY_REF>;
+		clock-names = "tcpdcore", "tcpdphy-ref";
+		assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>;
+		assigned-clock-rates = <50000000>;
+		power-domains = <&power RK3399_PD_TCPD0>;
+		resets = <&cru SRST_UPHY0>,
+			 <&cru SRST_UPHY0_PIPE_L00>,
+			 <&cru SRST_P_UPHY0_TCPHY>;
+		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+		rockchip,grf = <&grf>;
+		rockchip,typec-conn-dir = <0xe580 0 16>;
+		rockchip,usb3tousb2-en = <0xe580 3 19>;
+		rockchip,external-psm = <0xe588 14 30>;
+		rockchip,pipe-status = <0xe5c0 0 0>;
+		status = "disabled";
+
+		tcphy0_dp: dp-port {
+			#phy-cells = <0>;
+		};
+
+		tcphy0_usb3: usb3-port {
+			#phy-cells = <0>;
+		};
+	};
+
+	tcphy1: phy@ff800000 {
+		compatible = "rockchip,rk3399-typec-phy";
+		reg = <0x0 0xff800000 0x0 0x40000>;
+		clocks = <&cru SCLK_UPHY1_TCPDCORE>,
+			 <&cru SCLK_UPHY1_TCPDPHY_REF>;
+		clock-names = "tcpdcore", "tcpdphy-ref";
+		assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>;
+		assigned-clock-rates = <50000000>;
+		power-domains = <&power RK3399_PD_TCPD1>;
+		resets = <&cru SRST_UPHY1>,
+			 <&cru SRST_UPHY1_PIPE_L00>,
+			 <&cru SRST_P_UPHY1_TCPHY>;
+		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+		rockchip,grf = <&grf>;
+		rockchip,typec-conn-dir = <0xe58c 0 16>;
+		rockchip,usb3tousb2-en = <0xe58c 3 19>;
+		rockchip,external-psm = <0xe594 14 30>;
+		rockchip,pipe-status = <0xe5c0 16 16>;
+		status = "disabled";
+
+		tcphy1_dp: dp-port {
+			#phy-cells = <0>;
+		};
+
+		tcphy1_usb3: usb3-port {
+			#phy-cells = <0>;
+		};
 	};
 
-	watchdog@ff840000 {
+	watchdog@ff848000 {
 		compatible = "snps,dw-wdt";
-		reg = <0x0 0xff840000 0x0 0x100>;
+		reg = <0x0 0xff848000 0x0 0x100>;
 		clocks = <&cru PCLK_WDT>;
-		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	rktimer: rktimer@ff850000 {
+		compatible = "rockchip,rk3399-timer";
+		reg = <0x0 0xff850000 0x0 0x1000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>;
+		clock-names = "pclk", "timer";
 	};
 
 	spdif: spdif@ff870000 {
 		compatible = "rockchip,rk3399-spdif";
 		reg = <0x0 0xff870000 0x0 0x1000>;
-		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>;
 		dmas = <&dmac_bus 7>;
 		dma-names = "tx";
 		clock-names = "mclk", "hclk";
@@ -509,7 +1281,7 @@
 		compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
 		reg = <0x0 0xff880000 0x0 0x1000>;
 		rockchip,grf = <&grf>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>;
 		dmas = <&dmac_bus 0>, <&dmac_bus 1>;
 		dma-names = "tx", "rx";
 		clock-names = "i2s_clk", "i2s_hclk";
@@ -522,7 +1294,7 @@
 	i2s1: i2s@ff890000 {
 		compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
 		reg = <0x0 0xff890000 0x0 0x1000>;
-		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>;
 		dmas = <&dmac_bus 2>, <&dmac_bus 3>;
 		dma-names = "tx", "rx";
 		clock-names = "i2s_clk", "i2s_hclk";
@@ -535,7 +1307,7 @@
 	i2s2: i2s@ff8a0000 {
 		compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
 		reg = <0x0 0xff8a0000 0x0 0x1000>;
-		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>;
 		dmas = <&dmac_bus 4>, <&dmac_bus 5>;
 		dma-names = "tx", "rx";
 		clock-names = "i2s_clk", "i2s_hclk";
@@ -555,7 +1327,7 @@
 			compatible = "rockchip,gpio-bank";
 			reg = <0x0 0xff720000 0x0 0x100>;
 			clocks = <&pmucru PCLK_GPIO0_PMU>;
-			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			gpio-controller;
 			#gpio-cells = <0x2>;
@@ -568,7 +1340,7 @@
 			compatible = "rockchip,gpio-bank";
 			reg = <0x0 0xff730000 0x0 0x100>;
 			clocks = <&pmucru PCLK_GPIO1_PMU>;
-			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			gpio-controller;
 			#gpio-cells = <0x2>;
@@ -581,7 +1353,7 @@
 			compatible = "rockchip,gpio-bank";
 			reg = <0x0 0xff780000 0x0 0x100>;
 			clocks = <&cru PCLK_GPIO2>;
-			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			gpio-controller;
 			#gpio-cells = <0x2>;
@@ -594,7 +1366,7 @@
 			compatible = "rockchip,gpio-bank";
 			reg = <0x0 0xff788000 0x0 0x100>;
 			clocks = <&cru PCLK_GPIO3>;
-			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			gpio-controller;
 			#gpio-cells = <0x2>;
@@ -607,7 +1379,7 @@
 			compatible = "rockchip,gpio-bank";
 			reg = <0x0 0xff790000 0x0 0x100>;
 			clocks = <&cru PCLK_GPIO4>;
-			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			gpio-controller;
 			#gpio-cells = <0x2>;
@@ -658,6 +1430,72 @@
 			drive-strength = <13>;
 		};
 
+		clock {
+			clk_32k: clk-32k {
+				rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		gmac {
+			rgmii_pins: rgmii-pins {
+				rockchip,pins =
+					/* mac_txclk */
+					<3 17 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_rxclk */
+					<3 14 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_mdio */
+					<3 13 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_txen */
+					<3 12 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_clk */
+					<3 11 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxdv */
+					<3 9 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_mdc */
+					<3 8 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxd1 */
+					<3 7 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxd0 */
+					<3 6 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_txd1 */
+					<3 5 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_txd0 */
+					<3 4 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_rxd3 */
+					<3 3 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxd2 */
+					<3 2 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_txd3 */
+					<3 1 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_txd2 */
+					<3 0 RK_FUNC_1 &pcfg_pull_none_13ma>;
+			};
+
+			rmii_pins: rmii-pins {
+				rockchip,pins =
+					/* mac_mdio */
+					<3 13 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_txen */
+					<3 12 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_clk */
+					<3 11 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxer */
+					<3 10 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxdv */
+					<3 9 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_mdc */
+					<3 8 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxd1 */
+					<3 7 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxd0 */
+					<3 6 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_txd1 */
+					<3 5 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_txd0 */
+					<3 4 RK_FUNC_1 &pcfg_pull_none_13ma>;
+			};
+		};
+
 		i2c0 {
 			i2c0_xfer: i2c0-xfer {
 				rockchip,pins =
@@ -756,6 +1594,16 @@
 			};
 		};
 
+		sleep {
+			ap_pwroff: ap-pwroff {
+				rockchip,pins = <1 5 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			ddrio_pwroff: ddrio-pwroff {
+				rockchip,pins = <0 1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
 		spdif {
 			spdif_bus: spdif-bus {
 				rockchip,pins =
@@ -881,6 +1729,16 @@
 			};
 		};
 
+		tsadc {
+			otp_gpio: otp-gpio {
+				rockchip,pins = <1 6 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			otp_out: otp-out {
+				rockchip,pins = <1 6 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
 		uart0 {
 			uart0_xfer: uart0-xfer {
 				rockchip,pins =
@@ -1009,5 +1867,18 @@
 					<1 14 RK_FUNC_1 &pcfg_pull_none>;
 			};
 		};
+
+		pcie {
+			pcie_clkreqn: pci-clkreqn {
+				rockchip,pins =
+					<2 26 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			pcie_clkreqnb: pci-clkreqnb {
+				rockchip,pins =
+					<4 24 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
 	};
 };
diff --git a/src/arm64/socionext/uniphier-ld11-ref.dts b/src/arm64/socionext/uniphier-ld11-ref.dts
new file mode 100644
index 000000000000..7168cf818ad8
--- /dev/null
+++ b/src/arm64/socionext/uniphier-ld11-ref.dts
@@ -0,0 +1,100 @@
+/*
+ * Device Tree Source for UniPhier LD11 Reference Board
+ *
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ld11.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier LD11 Reference Board";
+	compatible = "socionext,uniphier-ld11-ref", "socionext,uniphier-ld11";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+	};
+};
+
+&ethsc {
+	interrupts = <0 48 4>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/src/arm64/socionext/uniphier-ld11.dtsi b/src/arm64/socionext/uniphier-ld11.dtsi
new file mode 100644
index 000000000000..7c7511b9d231
--- /dev/null
+++ b/src/arm64/socionext/uniphier-ld11.dtsi
@@ -0,0 +1,379 @@
+/*
+ * Device Tree Source for UniPhier LD11 SoC
+ *
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/memreserve/ 0x80000000 0x00080000;
+
+/ {
+	compatible = "socionext,uniphier-ld11";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0 0x000>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0 0x001>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+	};
+
+	cluster0_opp: opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@245000000 {
+			opp-hz = /bits/ 64 <245000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@490000000 {
+			opp-hz = /bits/ 64 <490000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@653334000 {
+			opp-hz = /bits/ 64 <653334000>;
+			clock-latency-ns = <300>;
+		};
+		opp@666667000 {
+			opp-hz = /bits/ 64 <666667000>;
+			clock-latency-ns = <300>;
+		};
+		opp@980000000 {
+			opp-hz = /bits/ 64 <980000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 4>,
+			     <1 14 4>,
+			     <1 11 4>,
+			     <1 10 4>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 177 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 4>;
+			clocks = <&peri_clk 6>;
+			clock-frequency = <400000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			clock-frequency = <100000>;
+		};
+
+		i2c4: i2c@58784000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58784000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 45 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c4>;
+			clocks = <&peri_clk 8>;
+			clock-frequency = <100000>;
+		};
+
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 25 4>;
+			clocks = <&peri_clk 9>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59800000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-ld11-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-ld11-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-ld11-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		usb0: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <0 243 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+			resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>;
+		};
+
+		usb1: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <0 244 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+			resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>;
+		};
+
+		usb2: usb@5a820100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a820100 0x100>;
+			interrupts = <0 245 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+			resets = <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>, <&sys_rst 8>;
+		};
+
+		mioctrl@5b3e0000 {
+			compatible = "socionext,uniphier-ld11-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x5b3e0000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-ld11-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-ld11-mio-reset";
+				#reset-cells = <1>;
+				resets = <&sys_rst 7>;
+			};
+		};
+
+		soc-glue@5f800000 {
+			compatible = "socionext,uniphier-ld11-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-ld11-pinctrl";
+			};
+		};
+
+		gic: interrupt-controller@5fe00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x5fe00000 0x10000>,	/* GICD */
+			      <0x5fe40000 0x80000>;	/* GICR */
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <1 9 4>;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-ld11-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-ld11-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-ld11-reset";
+				#reset-cells = <1>;
+			};
+		};
+	};
+};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/src/arm64/socionext/uniphier-ld20-ref.dts b/src/arm64/socionext/uniphier-ld20-ref.dts
new file mode 100644
index 000000000000..609162a1a322
--- /dev/null
+++ b/src/arm64/socionext/uniphier-ld20-ref.dts
@@ -0,0 +1,88 @@
+/*
+ * Device Tree Source for UniPhier LD20 Reference Board
+ *
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ld20.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier LD20 Reference Board";
+	compatible = "socionext,uniphier-ld20-ref", "socionext,uniphier-ld20";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0xc0000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+	};
+};
+
+&ethsc {
+	interrupts = <0 48 4>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/src/arm64/socionext/uniphier-ld20.dtsi b/src/arm64/socionext/uniphier-ld20.dtsi
new file mode 100644
index 000000000000..fcaecc6bdeac
--- /dev/null
+++ b/src/arm64/socionext/uniphier-ld20.dtsi
@@ -0,0 +1,414 @@
+/*
+ * Device Tree Source for UniPhier LD20 SoC
+ *
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/memreserve/ 0x80000000 0x00080000;
+
+/ {
+	compatible = "socionext,uniphier-ld20";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu2>;
+				};
+				core1 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x000>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x001>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0 0x100>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster1_opp>;
+		};
+
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0 0x101>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster1_opp>;
+		};
+	};
+
+	cluster0_opp: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@550000000 {
+			opp-hz = /bits/ 64 <550000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@666667000 {
+			opp-hz = /bits/ 64 <666667000>;
+			clock-latency-ns = <300>;
+		};
+		opp@733334000 {
+			opp-hz = /bits/ 64 <733334000>;
+			clock-latency-ns = <300>;
+		};
+		opp@1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	cluster1_opp: opp_table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@550000000 {
+			opp-hz = /bits/ 64 <550000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@666667000 {
+			opp-hz = /bits/ 64 <666667000>;
+			clock-latency-ns = <300>;
+		};
+		opp@733334000 {
+			opp-hz = /bits/ 64 <733334000>;
+			clock-latency-ns = <300>;
+		};
+		opp@1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 4>,
+			     <1 14 4>,
+			     <1 11 4>,
+			     <1 10 4>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 177 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 4>;
+			clocks = <&peri_clk 6>;
+			clock-frequency = <400000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			clock-frequency = <100000>;
+		};
+
+		i2c4: i2c@58784000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58784000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 45 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c4>;
+			clocks = <&peri_clk 8>;
+			clock-frequency = <100000>;
+		};
+
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 25 4>;
+			clocks = <&peri_clk 9>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59800000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		sdctrl@59810000 {
+			compatible = "socionext,uniphier-ld20-sdctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			sd_clk: clock {
+				compatible = "socionext,uniphier-ld20-sd-clock";
+				#clock-cells = <1>;
+			};
+
+			sd_rst: reset {
+				compatible = "socionext,uniphier-ld20-sd-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-ld20-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-ld20-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-ld20-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		soc-glue@5f800000 {
+			compatible = "socionext,uniphier-ld20-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-ld20-pinctrl";
+			};
+		};
+
+		gic: interrupt-controller@5fe00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x5fe00000 0x10000>,	/* GICD */
+			      <0x5fe80000 0x80000>;	/* GICR */
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <1 9 4>;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-ld20-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-ld20-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-ld20-reset";
+				#reset-cells = <1>;
+			};
+		};
+	};
+};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/src/arm64/socionext/uniphier-pinctrl.dtsi b/src/arm64/socionext/uniphier-pinctrl.dtsi
index f2f3fbe2d517..10a711041b4a 100644
--- a/src/arm64/socionext/uniphier-pinctrl.dtsi
+++ b/src/arm64/socionext/uniphier-pinctrl.dtsi
@@ -78,6 +78,11 @@
 		function = "nand";
 	};
 
+	pinctrl_system_bus: system_bus_grp {
+		groups = "system_bus", "system_bus_cs1";
+		function = "system_bus";
+	};
+
 	pinctrl_uart0: uart0_grp {
 		groups = "uart0";
 		function = "uart0";
diff --git a/src/arm64/xilinx/zynqmp-ep108.dts b/src/arm64/xilinx/zynqmp-ep108.dts
index acb0527fdc4a..ef1b9e573af0 100644
--- a/src/arm64/xilinx/zynqmp-ep108.dts
+++ b/src/arm64/xilinx/zynqmp-ep108.dts
@@ -27,9 +27,9 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x0 0x0 0x40000000>;
+		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 };
 
diff --git a/src/arm64/xilinx/zynqmp.dtsi b/src/arm64/xilinx/zynqmp.dtsi
index e595f22e7e4b..54dc28351c8c 100644
--- a/src/arm64/xilinx/zynqmp.dtsi
+++ b/src/arm64/xilinx/zynqmp.dtsi
@@ -14,7 +14,7 @@
 / {
 	compatible = "xlnx,zynqmp";
 	#address-cells = <2>;
-	#size-cells = <1>;
+	#size-cells = <2>;
 
 	cpus {
 		#address-cells = <1>;
@@ -51,6 +51,7 @@
 
 	pmu {
 		compatible = "arm,armv8-pmuv3";
+		interrupt-parent = <&gic>;
 		interrupts = <0 143 4>,
 			     <0 144 4>,
 			     <0 145 4>,
@@ -65,25 +66,25 @@
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupt-parent = <&gic>;
-		interrupts = <1 13 0xf01>,
-			     <1 14 0xf01>,
-			     <1 11 0xf01>,
-			     <1 10 0xf01>;
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
 	};
 
-	amba_apu {
+	amba_apu: amba_apu@0 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
-		ranges;
+		ranges = <0 0 0 0 0xffffffff>;
 
 		gic: interrupt-controller@f9010000 {
 			compatible = "arm,gic-400", "arm,cortex-a15-gic";
 			#interrupt-cells = <3>;
 			reg = <0x0 0xf9010000 0x10000>,
-			      <0x0 0xf902f000 0x2000>,
+			      <0x0 0xf9020000 0x20000>,
 			      <0x0 0xf9040000 0x20000>,
-			      <0x0 0xf906f000 0x2000>;
+			      <0x0 0xf9060000 0x20000>;
 			interrupt-controller;
 			interrupt-parent = <&gic>;
 			interrupts = <1 9 0xf04>;
@@ -93,14 +94,14 @@
 	amba: amba {
 		compatible = "simple-bus";
 		#address-cells = <2>;
-		#size-cells = <1>;
+		#size-cells = <2>;
 		ranges;
 
 		can0: can@ff060000 {
 			compatible = "xlnx,zynq-can-1.0";
 			status = "disabled";
 			clock-names = "can_clk", "pclk";
-			reg = <0x0 0xff060000 0x1000>;
+			reg = <0x0 0xff060000 0x0 0x1000>;
 			interrupts = <0 23 4>;
 			interrupt-parent = <&gic>;
 			tx-fifo-depth = <0x40>;
@@ -111,7 +112,7 @@
 			compatible = "xlnx,zynq-can-1.0";
 			status = "disabled";
 			clock-names = "can_clk", "pclk";
-			reg = <0x0 0xff070000 0x1000>;
+			reg = <0x0 0xff070000 0x0 0x1000>;
 			interrupts = <0 24 4>;
 			interrupt-parent = <&gic>;
 			tx-fifo-depth = <0x40>;
@@ -123,7 +124,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 57 4>, <0 57 4>;
-			reg = <0x0 0xff0b0000 0x1000>;
+			reg = <0x0 0xff0b0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -134,7 +135,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 59 4>, <0 59 4>;
-			reg = <0x0 0xff0c0000 0x1000>;
+			reg = <0x0 0xff0c0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -145,7 +146,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 61 4>, <0 61 4>;
-			reg = <0x0 0xff0d0000 0x1000>;
+			reg = <0x0 0xff0d0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -156,7 +157,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 63 4>, <0 63 4>;
-			reg = <0x0 0xff0e0000 0x1000>;
+			reg = <0x0 0xff0e0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -170,33 +171,72 @@
 			interrupts = <0 16 4>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			reg = <0x0 0xff0a0000 0x1000>;
+			reg = <0x0 0xff0a0000 0x0 0x1000>;
 		};
 
 		i2c0: i2c@ff020000 {
-			compatible = "cdns,i2c-r1p10";
+			compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 17 4>;
-			reg = <0x0 0xff020000 0x1000>;
+			reg = <0x0 0xff020000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
 		i2c1: i2c@ff030000 {
-			compatible = "cdns,i2c-r1p10";
+			compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 18 4>;
-			reg = <0x0 0xff030000 0x1000>;
+			reg = <0x0 0xff030000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
+		pcie: pcie@fd0e0000 {
+			compatible = "xlnx,nwl-pcie-2.11";
+			status = "disabled";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			msi-controller;
+			device_type = "pci";
+			interrupt-parent = <&gic>;
+			interrupts = <0 118 4>,
+				    <0 117 4>,
+				    <0 116 4>,
+				    <0 115 4>,	/* MSI_1 [63...32] */
+				    <0 114 4>;	/* MSI_0 [31...0] */
+			interrupt-names = "misc", "dummy", "intx",
+					  "msi1", "msi0";
+			msi-parent = <&pcie>;
+			reg = <0x0 0xfd0e0000 0x0 0x1000>,
+			      <0x0 0xfd480000 0x0 0x1000>,
+			      <0x80 0x00000000 0x0 0x1000000>;
+			reg-names = "breg", "pcireg", "cfg";
+			ranges = <0x02000000 0x00000000 0xe0000000 0x00000000
+				  0xe0000000 0x00000000 0x10000000
+				  /* non-prefetchable memory */
+				  0x43000000 0x00000006 0x00000000 0x00000006
+				  0x00000000 0x00000002 0x00000000>;
+				  /* prefetchable memory */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
+					<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
+					<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
+					<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+			pcie_intc: legacy-interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
 		sata: ahci@fd0c0000 {
 			compatible = "ceva,ahci-1v84";
 			status = "disabled";
-			reg = <0x0 0xfd0c0000 0x2000>;
+			reg = <0x0 0xfd0c0000 0x0 0x2000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 133 4>;
 		};
@@ -206,7 +246,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 48 4>;
-			reg = <0x0 0xff160000 0x1000>;
+			reg = <0x0 0xff160000 0x0 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
 		};
 
@@ -215,13 +255,13 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 49 4>;
-			reg = <0x0 0xff170000 0x1000>;
+			reg = <0x0 0xff170000 0x0 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
 		};
 
 		smmu: smmu@fd800000 {
 			compatible = "arm,mmu-500";
-			reg = <0x0 0xfd800000 0x20000>;
+			reg = <0x0 0xfd800000 0x0 0x20000>;
 			#global-interrupts = <1>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 157 4>,
@@ -236,7 +276,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 19 4>;
-			reg = <0x0 0xff040000 0x1000>;
+			reg = <0x0 0xff040000 0x0 0x1000>;
 			clock-names = "ref_clk", "pclk";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -247,7 +287,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 20 4>;
-			reg = <0x0 0xff050000 0x1000>;
+			reg = <0x0 0xff050000 0x0 0x1000>;
 			clock-names = "ref_clk", "pclk";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -258,7 +298,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
-			reg = <0x0 0xff110000 0x1000>;
+			reg = <0x0 0xff110000 0x0 0x1000>;
 			timer-width = <32>;
 		};
 
@@ -267,7 +307,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
-			reg = <0x0 0xff120000 0x1000>;
+			reg = <0x0 0xff120000 0x0 0x1000>;
 			timer-width = <32>;
 		};
 
@@ -276,7 +316,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
-			reg = <0x0 0xff130000 0x1000>;
+			reg = <0x0 0xff130000 0x0 0x1000>;
 			timer-width = <32>;
 		};
 
@@ -285,7 +325,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
-			reg = <0x0 0xff140000 0x1000>;
+			reg = <0x0 0xff140000 0x0 0x1000>;
 			timer-width = <32>;
 		};
 
@@ -294,7 +334,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 21 4>;
-			reg = <0x0 0xff000000 0x1000>;
+			reg = <0x0 0xff000000 0x0 0x1000>;
 			clock-names = "uart_clk", "pclk";
 		};
 
@@ -303,7 +343,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 22 4>;
-			reg = <0x0 0xff010000 0x1000>;
+			reg = <0x0 0xff010000 0x0 0x1000>;
 			clock-names = "uart_clk", "pclk";
 		};
 
@@ -312,7 +352,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 65 4>;
-			reg = <0x0 0xfe200000 0x40000>;
+			reg = <0x0 0xfe200000 0x0 0x40000>;
 			clock-names = "clk_xin", "clk_ahb";
 		};
 
@@ -321,7 +361,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 70 4>;
-			reg = <0x0 0xfe300000 0x40000>;
+			reg = <0x0 0xfe300000 0x0 0x40000>;
 			clock-names = "clk_xin", "clk_ahb";
 		};
 
@@ -329,8 +369,8 @@
 			compatible = "cdns,wdt-r1p2";
 			status = "disabled";
 			interrupt-parent = <&gic>;
-			interrupts = <0 52 1>;
-			reg = <0x0 0xfd4d0000 0x1000>;
+			interrupts = <0 113 1>;
+			reg = <0x0 0xfd4d0000 0x0 0x1000>;
 			timeout-sec = <10>;
 		};
 	};
diff --git a/src/arm64/zte/zx296718-evb.dts b/src/arm64/zte/zx296718-evb.dts
new file mode 100644
index 000000000000..e164ff6de5fc
--- /dev/null
+++ b/src/arm64/zte/zx296718-evb.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2016 ZTE Corporation.
+ * Copyright 2016 Linaro Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "zx296718.dtsi"
+
+/ {
+	model = "ZTE zx296718 evaluation board";
+	compatible = "zte,zx296718-evb", "zte,zx296718";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm64/zte/zx296718.dtsi b/src/arm64/zte/zx296718.dtsi
new file mode 100644
index 000000000000..88ff70a06086
--- /dev/null
+++ b/src/arm64/zte/zx296718.dtsi
@@ -0,0 +1,309 @@
+/*
+ * Copyright 2016 ZTE Corporation.
+ * Copyright 2016 Linaro Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "zte,zx296718";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	clk24k: clk-24k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000>;
+		clock-output-names = "rtcclk";
+	};
+
+	osc32k: clk-osc32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "osc32k";
+	};
+
+	osc12m: clk-osc12m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+		clock-output-names = "osc12m";
+	};
+
+	osc24m: clk-osc24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc24m";
+	};
+
+	osc25m: clk-osc25m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "osc25m";
+	};
+
+	osc60m: clk-osc60m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <60000000>;
+		clock-output-names = "osc60m";
+	};
+
+	osc99m: clk-osc99m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <99000000>;
+		clock-output-names = "osc99m";
+	};
+
+	osc125m: clk-osc125m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "osc125m";
+	};
+
+	osc198m: clk-osc198m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <198000000>;
+		clock-output-names = "osc198m";
+	};
+
+	pll_audio: clk-pll-884m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <884000000>;
+		clock-output-names = "pll_audio";
+	};
+
+	pll_ddr: clk-pll-932m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <932000000>;
+		clock-output-names = "pll_ddr";
+	};
+
+	pll_hsic: clk-pll-960m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <960000000>;
+		clock-output-names = "pll_hsic";
+	};
+
+	pll_mac: clk-pll-1000m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000000>;
+		clock-output-names = "pll_mac";
+	};
+
+	pll_vga: clk-pll-1073m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1073000000>;
+		clock-output-names = "pll_vga";
+	};
+
+	pll_mm0: clk-pll-1188m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1188000000>;
+		clock-output-names = "pll_mm0";
+	};
+
+	pll_mm1: clk-pll-1296m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1296000000>;
+		clock-output-names = "pll_mm1";
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gic: interrupt-controller@2a00000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x02a00000 0x10000>,
+		      <0x02b00000 0xc0000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		aon_sysctrl: aon-sysctrl@116000 {
+			compatible = "zte,zx296718-aon-sysctrl", "syscon";
+			reg = <0x116000 0x1000>;
+		};
+
+		uart0: uart@11f000 {
+			compatible = "arm,pl011", "arm,primecell";
+			arm,primecell-periphid = <0x001feffe>;
+			reg = <0x11f000 0x1000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24m>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		dma: dma-controller@1460000 {
+			compatible = "zte,zx296702-dma";
+			reg = <0x01460000 0x1000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24m>;
+			clock-names = "dmaclk";
+			#dma-cells = <1>;
+			dma-channels = <32>;
+			dma-requests = <32>;
+		};
+
+		lsp0crm: clock-controller@1420000 {
+			compatible = "zte,zx296718-lsp0crm";
+			reg = <0x01420000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		lsp1crm: clock-controller@1430000 {
+			compatible = "zte,zx296718-lsp1crm";
+			reg = <0x01430000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		topcrm: clock-controller@1461000 {
+			compatible = "zte,zx296718-topcrm";
+			reg = <0x01461000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sysctrl: sysctrl@1463000 {
+			compatible = "zte,zx296718-sysctrl", "syscon";
+			reg = <0x1463000 0x1000>;
+		};
+
+		audiocrm: clock-controller@1480000 {
+			compatible = "zte,zx296718-audiocrm";
+			reg = <0x01480000 0x1000>;
+			#clock-cells = <1>;
+		};
+	};
+};
diff --git a/src/c6x/dsk6455.dts b/src/c6x/dsk6455.dts
new file mode 100644
index 000000000000..2b71f800618d
--- /dev/null
+++ b/src/c6x/dsk6455.dts
@@ -0,0 +1,62 @@
+/*
+ * arch/c6x/boot/dts/dsk6455.dts
+ *
+ * DSK6455 Evaluation Platform For TMS320C6455
+ * Copyright (C) 2011 Texas Instruments Incorporated
+ *
+ * Author: Mark Salter <msalter@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+/dts-v1/;
+
+/include/ "tms320c6455.dtsi"
+
+/ {
+	model = "Spectrum Digital DSK6455";
+	compatible = "spectrum-digital,dsk6455";
+
+	chosen {
+		bootargs = "root=/dev/nfs ip=dhcp rw";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0xE0000000 0x08000000>;
+	};
+
+	soc {
+		megamod_pic: interrupt-controller@1800000 {
+			interrupts = < 12 13 14 15 >;
+		};
+
+		emifa@70000000 {
+			flash@3,0 {
+				  #address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "cfi-flash";
+				reg = <0x3 0x0 0x400000>;
+				bank-width = <1>;
+				device-width = <1>;
+				partition@0 {
+					reg = <0x0 0x400000>;
+					label = "NOR";
+				};
+			};
+		};
+
+		timer1: timer@2980000 {
+			interrupt-parent = <&megamod_pic>;
+			interrupts = < 69 >;
+		};
+
+		clock-controller@029a0000 {
+			clock-frequency = <50000000>;
+		};
+	};
+};
diff --git a/src/c6x/evmc6457.dts b/src/c6x/evmc6457.dts
new file mode 100644
index 000000000000..0301eb9a8ff8
--- /dev/null
+++ b/src/c6x/evmc6457.dts
@@ -0,0 +1,48 @@
+/*
+ * arch/c6x/boot/dts/evmc6457.dts
+ *
+ * EVMC6457 Evaluation Platform For TMS320C6457
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated
+ *
+ * Author: Mark Salter <msalter@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+/dts-v1/;
+
+/include/ "tms320c6457.dtsi"
+
+/ {
+	model = "eInfochips EVMC6457";
+	compatible = "einfochips,evmc6457";
+
+	chosen {
+		bootargs = "console=hvc root=/dev/nfs ip=dhcp rw";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0xE0000000 0x10000000>;
+	};
+
+	soc {
+		megamod_pic: interrupt-controller@1800000 {
+		       interrupts = < 12 13 14 15 >;
+		};
+
+		timer0: timer@2940000 {
+			interrupt-parent = <&megamod_pic>;
+			interrupts = < 67 >;
+		};
+
+		clock-controller@29a0000 {
+			clock-frequency = <60000000>;
+		};
+	};
+};
diff --git a/src/c6x/evmc6472.dts b/src/c6x/evmc6472.dts
new file mode 100644
index 000000000000..3e207b449a93
--- /dev/null
+++ b/src/c6x/evmc6472.dts
@@ -0,0 +1,73 @@
+/*
+ * arch/c6x/boot/dts/evmc6472.dts
+ *
+ * EVMC6472 Evaluation Platform For TMS320C6472
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated
+ *
+ * Author: Mark Salter <msalter@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+/dts-v1/;
+
+/include/ "tms320c6472.dtsi"
+
+/ {
+	model = "eInfochips EVMC6472";
+	compatible = "einfochips,evmc6472";
+
+	chosen {
+		bootargs = "console=hvc root=/dev/nfs ip=dhcp rw";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0xE0000000 0x10000000>;
+	};
+
+	soc {
+		megamod_pic: interrupt-controller@1800000 {
+		       interrupts = < 12 13 14 15 >;
+		};
+
+		timer0: timer@25e0000 {
+			interrupt-parent = <&megamod_pic>;
+			interrupts = < 16 >;
+		};
+
+		timer1: timer@25f0000 {
+			interrupt-parent = <&megamod_pic>;
+			interrupts = < 16 >;
+		};
+
+		timer2: timer@2600000 {
+			interrupt-parent = <&megamod_pic>;
+			interrupts = < 16 >;
+		};
+
+		timer3: timer@2610000 {
+			interrupt-parent = <&megamod_pic>;
+			interrupts = < 16 >;
+		};
+
+		timer4: timer@2620000 {
+			interrupt-parent = <&megamod_pic>;
+			interrupts = < 16 >;
+		};
+
+		timer5: timer@2630000 {
+			interrupt-parent = <&megamod_pic>;
+			interrupts = < 16 >;
+		};
+
+		clock-controller@29a0000 {
+			clock-frequency = <25000000>;
+		};
+	};
+};
diff --git a/src/c6x/evmc6474.dts b/src/c6x/evmc6474.dts
new file mode 100644
index 000000000000..4dc291292bc4
--- /dev/null
+++ b/src/c6x/evmc6474.dts
@@ -0,0 +1,58 @@
+/*
+ * arch/c6x/boot/dts/evmc6474.dts
+ *
+ * EVMC6474 Evaluation Platform For TMS320C6474
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated
+ *
+ * Author: Mark Salter <msalter@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+/dts-v1/;
+
+/include/ "tms320c6474.dtsi"
+
+/ {
+	model = "Spectrum Digital EVMC6474";
+	compatible = "spectrum-digital,evmc6474";
+
+	chosen {
+		bootargs = "console=hvc root=/dev/nfs ip=dhcp rw";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x08000000>;
+	};
+
+	soc {
+		megamod_pic: interrupt-controller@1800000 {
+		       interrupts = < 12 13 14 15 >;
+		};
+
+		timer3: timer@2940000 {
+			interrupt-parent = <&megamod_pic>;
+			interrupts = < 39 >;
+		};
+
+		timer4: timer@2950000 {
+			interrupt-parent = <&megamod_pic>;
+			interrupts = < 41 >;
+		};
+
+		timer5: timer@2960000 {
+			interrupt-parent = <&megamod_pic>;
+			interrupts = < 43 >;
+		};
+
+		clock-controller@29a0000 {
+			clock-frequency = <50000000>;
+		};
+	};
+};
diff --git a/src/c6x/evmc6678.dts b/src/c6x/evmc6678.dts
new file mode 100644
index 000000000000..ab686301d321
--- /dev/null
+++ b/src/c6x/evmc6678.dts
@@ -0,0 +1,83 @@
+/*
+ * arch/c6x/boot/dts/evmc6678.dts
+ *
+ * EVMC6678 Evaluation Platform For TMS320C6678
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated
+ *
+ * Author: Ken Cox <jkc@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+/dts-v1/;
+
+/include/ "tms320c6678.dtsi"
+
+/ {
+	model = "Advantech EVMC6678";
+	compatible = "advantech,evmc6678";
+
+	chosen {
+		bootargs = "root=/dev/nfs ip=dhcp rw";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	soc {
+		megamod_pic: interrupt-controller@1800000 {
+		       interrupts = < 12 13 14 15 >;
+		};
+
+		timer8: timer@2280000 {
+			interrupt-parent = <&megamod_pic>;
+			interrupts = < 66 >;
+		};
+
+		timer9: timer@2290000 {
+			interrupt-parent = <&megamod_pic>;
+			interrupts = < 68 >;
+		};
+
+		timer10: timer@22A0000 {
+			interrupt-parent = <&megamod_pic>;
+			interrupts = < 70 >;
+		};
+
+		timer11: timer@22B0000 {
+			interrupt-parent = <&megamod_pic>;
+			interrupts = < 72 >;
+		};
+
+		timer12: timer@22C0000 {
+			interrupt-parent = <&megamod_pic>;
+			interrupts = < 74 >;
+		};
+
+		timer13: timer@22D0000 {
+			interrupt-parent = <&megamod_pic>;
+			interrupts = < 76 >;
+		};
+
+		timer14: timer@22E0000 {
+			interrupt-parent = <&megamod_pic>;
+			interrupts = < 78 >;
+		};
+
+		timer15: timer@22F0000 {
+			interrupt-parent = <&megamod_pic>;
+			interrupts = < 80 >;
+		};
+
+		clock-controller@2310000 {
+			clock-frequency = <100000000>;
+		};
+	};
+};
diff --git a/src/c6x/tms320c6455.dtsi b/src/c6x/tms320c6455.dtsi
new file mode 100644
index 000000000000..a804ec1e018b
--- /dev/null
+++ b/src/c6x/tms320c6455.dtsi
@@ -0,0 +1,96 @@
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "ti,c64x+";
+			reg = <0>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		model = "tms320c6455";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		core_pic: interrupt-controller {
+			  interrupt-controller;
+			  #interrupt-cells = <1>;
+			  compatible = "ti,c64x+core-pic";
+		};
+
+		/*
+		 * Megamodule interrupt controller
+		 */
+		megamod_pic: interrupt-controller@1800000 {
+		       compatible = "ti,c64x+megamod-pic";
+		       interrupt-controller;
+		       #interrupt-cells = <1>;
+		       reg = <0x1800000 0x1000>;
+		       interrupt-parent = <&core_pic>;
+		};
+
+		cache-controller@1840000 {
+			compatible = "ti,c64x+cache";
+			reg = <0x01840000 0x8400>;
+		};
+
+		emifa@70000000 {
+			compatible = "ti,c64x+emifa", "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			reg = <0x70000000 0x100>;
+			ranges = <0x2 0x0 0xa0000000 0x00000008
+			          0x3 0x0 0xb0000000 0x00400000
+				  0x4 0x0 0xc0000000 0x10000000
+				  0x5 0x0 0xD0000000 0x10000000>;
+
+			ti,dscr-dev-enable = <13>;
+			ti,emifa-burst-priority = <255>;
+			ti,emifa-ce-config = <0x00240120
+					      0x00240120
+					      0x00240122
+					      0x00240122>;
+		};
+
+		timer1: timer@2980000 {
+			compatible = "ti,c64x+timer64";
+			reg = <0x2980000 0x40>;
+			ti,dscr-dev-enable = <4>;
+		};
+
+		clock-controller@029a0000 {
+			compatible = "ti,c6455-pll", "ti,c64x+pll";
+			reg = <0x029a0000 0x200>;
+			ti,c64x+pll-bypass-delay = <1440>;
+			ti,c64x+pll-reset-delay = <15360>;
+			ti,c64x+pll-lock-delay = <24000>;
+		};
+
+		device-state-config-regs@2a80000 {
+			compatible = "ti,c64x+dscr";
+			reg = <0x02a80000 0x41000>;
+
+			ti,dscr-devstat = <0>;
+			ti,dscr-silicon-rev = <8 28 0xf>;
+			ti,dscr-rmii-resets = <0 0x40020 0x00040000>;
+
+			ti,dscr-locked-regs = <0x40008 0x40004 0x0f0a0b00>;
+			ti,dscr-devstate-ctl-regs =
+				 <0 12 0x40008 1 0  0  2
+				  12 1 0x40008 3 0 30  2
+				  13 2 0x4002c 1 0xffffffff 0 1>;
+			ti,dscr-devstate-stat-regs =
+				<0 10 0x40014 1 0  0  3
+				 10 2 0x40018 1 0  0  3>;
+		};
+	};
+};
diff --git a/src/c6x/tms320c6457.dtsi b/src/c6x/tms320c6457.dtsi
new file mode 100644
index 000000000000..35f40709a719
--- /dev/null
+++ b/src/c6x/tms320c6457.dtsi
@@ -0,0 +1,68 @@
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "ti,c64x+";
+			reg = <0>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		model = "tms320c6457";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		core_pic: interrupt-controller {
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			compatible = "ti,c64x+core-pic";
+		};
+
+		megamod_pic: interrupt-controller@1800000 {
+			compatible = "ti,c64x+megamod-pic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&core_pic>;
+			reg = <0x1800000 0x1000>;
+		};
+
+		cache-controller@1840000 {
+			compatible = "ti,c64x+cache";
+			reg = <0x01840000 0x8400>;
+		};
+
+		device-state-controller@2880800 {
+			compatible = "ti,c64x+dscr";
+			reg = <0x02880800 0x400>;
+
+			ti,dscr-devstat = <0x20>;
+			ti,dscr-silicon-rev = <0x18 28 0xf>;
+			ti,dscr-mac-fuse-regs = <0x114 3 4 5 6
+						 0x118 0 0 1 2>;
+			ti,dscr-kick-regs = <0x38 0x83E70B13
+					     0x3c 0x95A4F1E0>;
+		};
+
+		timer0: timer@2940000 {
+			compatible = "ti,c64x+timer64";
+			reg = <0x2940000 0x40>;
+		};
+
+		clock-controller@29a0000 {
+			compatible = "ti,c6457-pll", "ti,c64x+pll";
+			reg = <0x029a0000 0x200>;
+			ti,c64x+pll-bypass-delay = <300>;
+			ti,c64x+pll-reset-delay = <24000>;
+			ti,c64x+pll-lock-delay = <50000>;
+		};
+	};
+};
diff --git a/src/c6x/tms320c6472.dtsi b/src/c6x/tms320c6472.dtsi
new file mode 100644
index 000000000000..b488aaec65c0
--- /dev/null
+++ b/src/c6x/tms320c6472.dtsi
@@ -0,0 +1,134 @@
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			reg = <0>;
+			model = "ti,c64x+";
+		};
+		cpu@1 {
+			device_type = "cpu";
+			reg = <1>;
+			model = "ti,c64x+";
+		};
+		cpu@2 {
+			device_type = "cpu";
+			reg = <2>;
+			model = "ti,c64x+";
+		};
+		cpu@3 {
+			device_type = "cpu";
+			reg = <3>;
+			model = "ti,c64x+";
+		};
+		cpu@4 {
+			device_type = "cpu";
+			reg = <4>;
+			model = "ti,c64x+";
+		};
+		cpu@5 {
+			device_type = "cpu";
+			reg = <5>;
+			model = "ti,c64x+";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		model = "tms320c6472";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		core_pic: interrupt-controller {
+			compatible = "ti,c64x+core-pic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		megamod_pic: interrupt-controller@1800000 {
+		       compatible = "ti,c64x+megamod-pic";
+		       interrupt-controller;
+		       #interrupt-cells = <1>;
+		       reg = <0x1800000 0x1000>;
+		       interrupt-parent = <&core_pic>;
+		};
+
+		cache-controller@1840000 {
+			compatible = "ti,c64x+cache";
+			reg = <0x01840000 0x8400>;
+		};
+
+		timer0: timer@25e0000 {
+			compatible = "ti,c64x+timer64";
+			ti,core-mask = < 0x01 >;
+			reg = <0x25e0000 0x40>;
+		};
+
+		timer1: timer@25f0000 {
+			compatible = "ti,c64x+timer64";
+			ti,core-mask = < 0x02 >;
+			reg = <0x25f0000 0x40>;
+		};
+
+		timer2: timer@2600000 {
+			compatible = "ti,c64x+timer64";
+			ti,core-mask = < 0x04 >;
+			reg = <0x2600000 0x40>;
+		};
+
+		timer3: timer@2610000 {
+			compatible = "ti,c64x+timer64";
+			ti,core-mask = < 0x08 >;
+			reg = <0x2610000 0x40>;
+		};
+
+		timer4: timer@2620000 {
+			compatible = "ti,c64x+timer64";
+			ti,core-mask = < 0x10 >;
+			reg = <0x2620000 0x40>;
+		};
+
+		timer5: timer@2630000 {
+			compatible = "ti,c64x+timer64";
+			ti,core-mask = < 0x20 >;
+			reg = <0x2630000 0x40>;
+		};
+
+		clock-controller@29a0000 {
+			compatible = "ti,c6472-pll", "ti,c64x+pll";
+			reg = <0x029a0000 0x200>;
+			ti,c64x+pll-bypass-delay = <200>;
+			ti,c64x+pll-reset-delay = <12000>;
+			ti,c64x+pll-lock-delay = <80000>;
+		};
+
+		device-state-controller@2a80000 {
+			compatible = "ti,c64x+dscr";
+			reg = <0x02a80000 0x1000>;
+
+			ti,dscr-devstat = <0>;
+			ti,dscr-silicon-rev = <0x70c 16 0xff>;
+
+			ti,dscr-mac-fuse-regs = <0x700 1 2 3 4
+						 0x704 5 6 0 0>;
+
+			ti,dscr-rmii-resets = <0x208 1
+					       0x20c 1>;
+
+			ti,dscr-locked-regs = <0x200 0x204 0x0a1e183a
+					       0x40c 0x420 0xbea7
+					       0x41c 0x420 0xbea7>;
+
+			ti,dscr-privperm = <0x41c 0xaaaaaaaa>;
+
+			ti,dscr-devstate-ctl-regs = <0 13 0x200 1 0 0 1>;
+		};
+	};
+};
diff --git a/src/c6x/tms320c6474.dtsi b/src/c6x/tms320c6474.dtsi
new file mode 100644
index 000000000000..cc601bf348a1
--- /dev/null
+++ b/src/c6x/tms320c6474.dtsi
@@ -0,0 +1,89 @@
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			reg = <0>;
+			model = "ti,c64x+";
+		};
+		cpu@1 {
+			device_type = "cpu";
+			reg = <1>;
+			model = "ti,c64x+";
+		};
+		cpu@2 {
+			device_type = "cpu";
+			reg = <2>;
+			model = "ti,c64x+";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		model = "tms320c6474";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		core_pic: interrupt-controller {
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			compatible = "ti,c64x+core-pic";
+		};
+
+		megamod_pic: interrupt-controller@1800000 {
+		       compatible = "ti,c64x+megamod-pic";
+		       interrupt-controller;
+		       #interrupt-cells = <1>;
+		       reg = <0x1800000 0x1000>;
+		       interrupt-parent = <&core_pic>;
+		};
+
+		cache-controller@1840000 {
+			compatible = "ti,c64x+cache";
+			reg = <0x01840000 0x8400>;
+		};
+
+		timer3: timer@2940000 {
+			compatible = "ti,c64x+timer64";
+			ti,core-mask = < 0x04 >;
+			reg = <0x2940000 0x40>;
+		};
+
+		timer4: timer@2950000 {
+			compatible = "ti,c64x+timer64";
+			ti,core-mask = < 0x02 >;
+			reg = <0x2950000 0x40>;
+		};
+
+		timer5: timer@2960000 {
+			compatible = "ti,c64x+timer64";
+			ti,core-mask = < 0x01 >;
+			reg = <0x2960000 0x40>;
+		};
+
+		device-state-controller@2880800 {
+			compatible = "ti,c64x+dscr";
+			reg = <0x02880800 0x400>;
+
+			ti,dscr-devstat = <0x004>;
+			ti,dscr-silicon-rev = <0x014 28 0xf>;
+			ti,dscr-mac-fuse-regs = <0x34 3 4 5 6
+						 0x38 0 0 1 2>;
+		};
+
+		clock-controller@29a0000 {
+			compatible = "ti,c6474-pll", "ti,c64x+pll";
+			reg = <0x029a0000 0x200>;
+			ti,c64x+pll-bypass-delay = <120>;
+			ti,c64x+pll-reset-delay = <30000>;
+			ti,c64x+pll-lock-delay = <60000>;
+		};
+	};
+};
diff --git a/src/c6x/tms320c6678.dtsi b/src/c6x/tms320c6678.dtsi
new file mode 100644
index 000000000000..386196e5eae7
--- /dev/null
+++ b/src/c6x/tms320c6678.dtsi
@@ -0,0 +1,146 @@
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			reg = <0>;
+			model = "ti,c66x";
+		};
+		cpu@1 {
+			device_type = "cpu";
+			reg = <1>;
+			model = "ti,c66x";
+		};
+		cpu@2 {
+			device_type = "cpu";
+			reg = <2>;
+			model = "ti,c66x";
+		};
+		cpu@3 {
+			device_type = "cpu";
+			reg = <3>;
+			model = "ti,c66x";
+		};
+		cpu@4 {
+			device_type = "cpu";
+			reg = <4>;
+			model = "ti,c66x";
+		};
+		cpu@5 {
+			device_type = "cpu";
+			reg = <5>;
+			model = "ti,c66x";
+		};
+		cpu@6 {
+			device_type = "cpu";
+			reg = <6>;
+			model = "ti,c66x";
+		};
+		cpu@7 {
+			device_type = "cpu";
+			reg = <7>;
+			model = "ti,c66x";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		model = "tms320c6678";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		core_pic: interrupt-controller {
+			compatible = "ti,c64x+core-pic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		megamod_pic: interrupt-controller@1800000 {
+		       compatible = "ti,c64x+megamod-pic";
+		       interrupt-controller;
+		       #interrupt-cells = <1>;
+		       reg = <0x1800000 0x1000>;
+		       interrupt-parent = <&core_pic>;
+		};
+
+		cache-controller@1840000 {
+			compatible = "ti,c64x+cache";
+			reg = <0x01840000 0x8400>;
+		};
+
+		timer8: timer@2280000 {
+			compatible = "ti,c64x+timer64";
+			ti,core-mask = < 0x01 >;
+			reg = <0x2280000 0x40>;
+		};
+
+		timer9: timer@2290000 {
+			compatible = "ti,c64x+timer64";
+			ti,core-mask = < 0x02 >;
+			reg = <0x2290000 0x40>;
+		};
+
+		timer10: timer@22A0000 {
+			compatible = "ti,c64x+timer64";
+			ti,core-mask = < 0x04 >;
+			reg = <0x22A0000 0x40>;
+		};
+
+		timer11: timer@22B0000 {
+			compatible = "ti,c64x+timer64";
+			ti,core-mask = < 0x08 >;
+			reg = <0x22B0000 0x40>;
+		};
+
+		timer12: timer@22C0000 {
+			compatible = "ti,c64x+timer64";
+			ti,core-mask = < 0x10 >;
+			reg = <0x22C0000 0x40>;
+		};
+
+		timer13: timer@22D0000 {
+			compatible = "ti,c64x+timer64";
+			ti,core-mask = < 0x20 >;
+			reg = <0x22D0000 0x40>;
+		};
+
+		timer14: timer@22E0000 {
+			compatible = "ti,c64x+timer64";
+			ti,core-mask = < 0x40 >;
+			reg = <0x22E0000 0x40>;
+		};
+
+		timer15: timer@22F0000 {
+			compatible = "ti,c64x+timer64";
+			ti,core-mask = < 0x80 >;
+			reg = <0x22F0000 0x40>;
+		};
+
+		clock-controller@2310000 {
+			compatible = "ti,c6678-pll", "ti,c64x+pll";
+			reg = <0x02310000 0x200>;
+			ti,c64x+pll-bypass-delay = <200>;
+			ti,c64x+pll-reset-delay = <12000>;
+			ti,c64x+pll-lock-delay = <80000>;
+		};
+
+		device-state-controller@2620000 {
+			compatible = "ti,c64x+dscr";
+			reg = <0x02620000 0x1000>;
+
+			ti,dscr-devstat = <0x20>;
+			ti,dscr-silicon-rev = <0x18 28 0xf>;
+
+			ti,dscr-mac-fuse-regs = <0x110 1 2 3 4
+						 0x114 5 6 0 0>;
+
+		};
+	};
+};
diff --git a/src/cris/artpec3.dtsi b/src/cris/artpec3.dtsi
new file mode 100644
index 000000000000..be15be67b653
--- /dev/null
+++ b/src/cris/artpec3.dtsi
@@ -0,0 +1,46 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "axis,crisv32";
+			reg = <0>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		model = "artpec3";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		intc: interrupt-controller {
+			compatible = "axis,crisv32-intc";
+			reg = <0xb002a000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gio: gpio@b0020000 {
+			compatible = "axis,artpec3-gio";
+			reg = <0xb0020000 0x1000>;
+			interrupts = <61>;
+			gpio-controller;
+			#gpio-cells = <3>;
+		};
+
+		serial@b003e000 {
+			compatible = "axis,etraxfs-uart";
+			reg = <0xb003e000 0x1000>;
+			interrupts = <64>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/cris/dev88.dts b/src/cris/dev88.dts
new file mode 100644
index 000000000000..b9a230d10874
--- /dev/null
+++ b/src/cris/dev88.dts
@@ -0,0 +1,67 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+/include/ "etraxfs.dtsi"
+
+/ {
+	model = "Axis 88 Developer Board";
+	compatible = "axis,dev88";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	soc {
+		uart0: serial@b00260000 {
+			status = "okay";
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-sck = <&gio 1 0 0xd>;
+		gpio-miso = <&gio 4 0 0xd>;
+		gpio-mosi = <&gio 0 0 0xd>;
+		cs-gpios = <&gio 3 0 0xd>;
+		num-chipselects = <1>;
+
+		temp-sensor@0 {
+			compatible = "ti,lm70";
+			reg = <0>;
+
+			spi-max-frequency = <100000>;
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		gpios = <&gio 5 0 0xd>, <&gio 6 0 0xd>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@51 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		network {
+			label = "network";
+			gpios = <&gio 2 GPIO_ACTIVE_LOW 0xa>;
+		};
+
+		status {
+			label = "status";
+			gpios = <&gio 3 GPIO_ACTIVE_LOW 0xa>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/src/cris/etraxfs.dtsi b/src/cris/etraxfs.dtsi
new file mode 100644
index 000000000000..bf1b8582d4d8
--- /dev/null
+++ b/src/cris/etraxfs.dtsi
@@ -0,0 +1,46 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "axis,crisv32";
+			reg = <0>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		model = "etraxfs";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		intc: interrupt-controller {
+			compatible = "axis,crisv32-intc";
+			reg = <0xb001c000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gio: gpio@b001a000 {
+			compatible = "axis,etraxfs-gio";
+			reg = <0xb001a000 0x1000>;
+			interrupts = <50>;
+			gpio-controller;
+			#gpio-cells = <3>;
+		};
+
+		serial@b00260000 {
+			compatible = "axis,etraxfs-uart";
+			reg = <0xb0026000 0x1000>;
+			interrupts = <68>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/cris/p1343.dts b/src/cris/p1343.dts
new file mode 100644
index 000000000000..fab7bdbd0f15
--- /dev/null
+++ b/src/cris/p1343.dts
@@ -0,0 +1,76 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/include/ "artpec3.dtsi"
+
+/ {
+	model = "Axis P1343 Network Camera";
+	compatible = "axis,p1343";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	soc {
+		uart0: serial@b003e000 {
+			status = "okay";
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		gpios = <&gio 3 0 0xa>, <&gio 2 0 0xa>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@51 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status_green {
+			label = "status:green";
+			gpios = <&gio 0 GPIO_ACTIVE_LOW 0xc>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		status_red {
+			label = "status:red";
+			gpios = <&gio 1 GPIO_ACTIVE_LOW 0xc>;
+		};
+
+		network_green {
+			label = "network:green";
+			gpios = <&gio 2 GPIO_ACTIVE_LOW 0xc>;
+		};
+
+		network_red {
+			label = "network:red";
+			gpios = <&gio 3 GPIO_ACTIVE_LOW 0xc>;
+		};
+
+		power_red {
+			label = "power:red";
+			gpios = <&gio 4 GPIO_ACTIVE_LOW 0xc>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		activity-button@0 {
+			label = "Activity Button";
+			linux,code = <KEY_FN>;
+			gpios = <&gio 13 GPIO_ACTIVE_LOW 0xd>;
+		};
+	};
+};
diff --git a/src/h8300/edosk2674.dts b/src/h8300/edosk2674.dts
new file mode 100644
index 000000000000..6ae884bf66a5
--- /dev/null
+++ b/src/h8300/edosk2674.dts
@@ -0,0 +1,107 @@
+/dts-v1/;
+/ {
+	compatible = "renesas,edosk2674";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&h8intc>;
+
+	chosen {
+		bootargs = "console=ttySC2,38400";
+		stdout-path = &sci2;
+	};
+	aliases {
+		serial0 = &sci0;
+		serial1 = &sci1;
+		serial2 = &sci2;
+	};
+
+	xclk: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <33333333>;
+		clock-output-names = "xtal";
+	};
+	pllclk: pllclk {
+		compatible = "renesas,h8s2678-pll-clock";
+		clocks = <&xclk>;
+		#clock-cells = <0>;
+		reg = <0xffff3b 1>, <0xffff45 1>;
+	};
+	core_clk: core_clk {
+		compatible = "renesas,h8300-div-clock";
+		clocks = <&pllclk>;
+		#clock-cells = <0>;
+		reg = <0xffff3b 1>;
+		renesas,width = <3>;
+	};
+	fclk: fclk {
+		compatible = "fixed-factor-clock";
+		clocks = <&core_clk>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+
+	memory@400000 {
+		device_type = "memory";
+		reg = <0x400000 0x800000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "renesas,h8300";
+			clock-frequency = <33333333>;
+		};
+	};
+
+	h8intc: interrupt-controller@fffe00 {
+		compatible = "renesas,h8s-intc", "renesas,h8300-intc";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xfffe00 24>;
+	};
+
+	bsc: memory-controller@fffec0 {
+		compatible = "renesas,h8s-bsc", "renesas,h8300-bsc";
+		reg = <0xfffec0 24>;
+	};
+
+	tpu: timer@ffffe0 {
+		compatible = "renesas,tpu";
+		reg = <0xffffe0 16>, <0xfffff0 12>;
+		clocks = <&fclk>;
+		clock-names = "fck";
+	};
+
+	timer8: timer@ffffb0 {
+		compatible = "renesas,8bit-timer";
+		reg = <0xffffb0 10>;
+		interrupts = <72 0>;
+		clocks = <&fclk>;
+		clock-names = "fck";
+	};
+
+	sci0: serial@ffff78 {
+		compatible = "renesas,sci";
+		reg = <0xffff78 8>;
+		interrupts = <88 0>, <89 0>, <90 0>, <91 0>;
+		clocks = <&fclk>;
+		clock-names = "fck";
+	};
+	sci1: serial@ffff80 {
+		compatible = "renesas,sci";
+		reg = <0xffff80 8>;
+		interrupts = <92 0>, <93 0>, <94 0>, <95 0>;
+		clocks = <&fclk>;
+		clock-names = "fck";
+	};
+	sci2: serial@ffff88 {
+		compatible = "renesas,sci";
+		reg = <0xffff88 8>;
+		interrupts = <96 0>, <97 0>, <98 0>, <99 0>;
+		clocks = <&fclk>;
+		clock-names = "fck";
+	};
+};
diff --git a/src/h8300/h8300h_sim.dts b/src/h8300/h8300h_sim.dts
new file mode 100644
index 000000000000..9c733d920f1f
--- /dev/null
+++ b/src/h8300/h8300h_sim.dts
@@ -0,0 +1,96 @@
+/dts-v1/;
+/ {
+	compatible = "gnu,gdbsim";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&h8intc>;
+
+	chosen {
+		bootargs = "earlyprintk=h8300-sim";
+		stdout-path = <&sci0>;
+	};
+	aliases {
+		serial0 = &sci0;
+		serial1 = &sci1;
+	};
+
+	xclk: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+		clock-output-names = "xtal";
+	};
+	core_clk: core_clk {
+		compatible = "renesas,h8300-div-clock";
+		clocks = <&xclk>;
+		#clock-cells = <0>;
+		reg = <0xfee01b 2>;
+		renesas,width = <2>;
+	};
+	fclk: fclk {
+		compatible = "fixed-factor-clock";
+		clocks = <&core_clk>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+
+	memory@400000 {
+		device_type = "memory";
+		reg = <0x400000 0x400000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "renesas,h8300";
+			clock-frequency = <20000000>;
+		};
+	};
+
+	h8intc: interrupt-controller@fee012 {
+		compatible = "renesas,h8300h-intc", "renesas,h8300-intc";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xfee012 7>;
+	};
+
+	bsc: memory-controller@fee01e {
+		compatible = "renesas,h8300h-bsc", "renesas,h8300-bsc";
+		reg = <0xfee01e 8>;
+	};
+
+	timer8: timer@ffff80 {
+		compatible = "renesas,8bit-timer";
+		reg = <0xffff80 10>;
+		interrupts = <36 0>;
+		clocks = <&fclk>;
+		clock-names = "fck";
+	};
+
+	timer16: timer@ffff68 {
+		compatible = "renesas,16bit-timer";
+		reg = <0xffff68 8>, <0xffff60 8>;
+		interrupts = <24 0>;
+		renesas,channel = <0>;
+		clocks = <&fclk>;
+		clock-names = "fck";
+	};
+
+	sci0: serial@ffffb0 {
+		compatible = "renesas,sci";
+		reg = <0xffffb0 8>;
+		interrupts = <52 0>, <53 0>, <54 0>, <55 0>;
+		clocks = <&fclk>;
+		clock-names = "fck";
+	};
+
+	sci1: serial@ffffb8 {
+		compatible = "renesas,sci";
+		reg = <0xffffb8 8>;
+		interrupts = <56 0>, <57 0>, <58 0>, <59 0>;
+		clocks = <&fclk>;
+		clock-names = "fck";
+	};
+};
diff --git a/src/h8300/h8s_sim.dts b/src/h8300/h8s_sim.dts
new file mode 100644
index 000000000000..97e1f4b17ef0
--- /dev/null
+++ b/src/h8300/h8s_sim.dts
@@ -0,0 +1,99 @@
+/dts-v1/;
+/ {
+	compatible = "gnu,gdbsim";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&h8intc>;
+
+	chosen {
+		bootargs = "earlyprintk=h8300-sim";
+		stdout-path = <&sci0>;
+	};
+	aliases {
+		serial0 = &sci0;
+		serial1 = &sci1;
+	};
+
+	xclk: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <33333333>;
+		clock-output-names = "xtal";
+	};
+	pllclk: pllclk {
+		compatible = "renesas,h8s2678-pll-clock";
+		clocks = <&xclk>;
+		#clock-cells = <0>;
+		reg = <0xfee03b 2>, <0xfee045 2>;
+	};
+	core_clk: core_clk {
+		compatible = "renesas,h8300-div-clock";
+		clocks = <&pllclk>;
+		#clock-cells = <0>;
+		reg = <0xfee03b 2>;
+		renesas,width = <3>;
+	};
+	fclk: fclk {
+		compatible = "fixed-factor-clock";
+		clocks = <&core_clk>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+
+	memory@400000 {
+		device_type = "memory";
+		reg = <0x400000 0x800000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "renesas,h8300";
+			clock-frequency = <33333333>;
+		};
+	};
+
+	h8intc: interrupt-controller@fffe00 {
+		compatible = "renesas,h8s-intc", "renesas,h8300-intc";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xfffe00 24>;
+	};
+
+	bsc: memory-controller@fffec0 {
+		compatible = "renesas,h8s-bsc", "renesas,h8300-bsc";
+		reg = <0xfffec0 24>;
+	};
+
+	tpu: timer@ffffe0 {
+		compatible = "renesas,tpu";
+		reg = <0xffffe0 16>, <0xfffff0 12>;
+		clocks = <&fclk>;
+		clock-names = "fck";
+	};
+
+	timer8: timer@ffffb0 {
+		compatible = "renesas,8bit-timer";
+		reg = <0xffffb0 10>;
+		interrupts = <72 0>;
+		clocks = <&fclk>;
+		clock-names = "fck";
+	};
+
+	sci0: serial@ffff78 {
+		compatible = "renesas,sci";
+		reg = <0xffff78 8>;
+		interrupts = <88 0>, <89 0>, <90 0>, <91 0>;
+		clocks = <&fclk>;
+		clock-names = "fck";
+	};
+	sci1: serial@ffff80 {
+		compatible = "renesas,sci";
+		reg = <0xffff80 8>;
+		interrupts = <92 0>, <93 0>, <94 0>, <95 0>;
+		clocks = <&fclk>;
+		clock-names = "fck";
+	};
+};
diff --git a/src/metag/skeleton.dts b/src/metag/skeleton.dts
new file mode 100644
index 000000000000..7a49aeb365d0
--- /dev/null
+++ b/src/metag/skeleton.dts
@@ -0,0 +1,10 @@
+/*
+ * Copyright (C) 2012 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "skeleton.dtsi"
diff --git a/src/metag/skeleton.dtsi b/src/metag/skeleton.dtsi
new file mode 100644
index 000000000000..78229eacced7
--- /dev/null
+++ b/src/metag/skeleton.dtsi
@@ -0,0 +1,14 @@
+/*
+ * Skeleton device tree; the bare minimum needed to boot; just include and
+ * add a compatible value.  The bootloader will typically populate the memory
+ * node.
+ */
+
+/ {
+	compatible = "img,meta";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+	aliases { };
+	memory { device_type = "memory"; reg = <0 0>; };
+};
diff --git a/src/metag/tz1090.dtsi b/src/metag/tz1090.dtsi
new file mode 100644
index 000000000000..24ea7d2e9138
--- /dev/null
+++ b/src/metag/tz1090.dtsi
@@ -0,0 +1,108 @@
+/*
+ * Copyright (C) 2012 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "toumaz,tz1090", "img,meta";
+
+	interrupt-parent = <&intc>;
+
+	intc: interrupt-controller {
+		compatible = "img,meta-intc";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		num-banks = <2>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pdc: pdc@0x02006000 {
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			reg = <0x02006000 0x1000>;
+			compatible = "img,pdc-intc";
+
+			num-perips = <3>;
+			num-syswakes = <3>;
+
+			interrupts = <18 IRQ_TYPE_LEVEL_HIGH>, /* Syswakes */
+			             <30 IRQ_TYPE_LEVEL_HIGH>, /* Perip 0 (RTC) */
+			             <29 IRQ_TYPE_LEVEL_HIGH>, /* Perip 1 (IR) */
+			             <31 IRQ_TYPE_LEVEL_HIGH>; /* Perip 2 (WDT) */
+		};
+
+		pinctrl: pinctrl@02005800 {
+			#gpio-range-cells = <3>;
+			compatible = "img,tz1090-pinctrl";
+			reg = <0x02005800 0xe4>;
+		};
+
+		pdc_pinctrl: pinctrl@02006500 {
+			#gpio-range-cells = <3>;
+			compatible = "img,tz1090-pdc-pinctrl";
+			reg = <0x02006500 0x100>;
+		};
+
+		gpios: gpios@02005800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "img,tz1090-gpio";
+			reg = <0x02005800 0x90>;
+
+			gpios0: bank@0 {
+				gpio-controller;
+				interrupt-controller;
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				reg = <0>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-ranges = <&pinctrl 0 0 30>;
+			};
+			gpios1: bank@1 {
+				gpio-controller;
+				interrupt-controller;
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				reg = <1>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-ranges = <&pinctrl 0 30 30>;
+			};
+			gpios2: bank@2 {
+				gpio-controller;
+				interrupt-controller;
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				reg = <2>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-ranges = <&pinctrl 0 60 30>;
+			};
+		};
+
+		pdc_gpios: gpios@02006500 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			compatible = "img,tz1090-pdc-gpio";
+			reg = <0x02006500 0x100>;
+
+			interrupt-parent = <&pdc>;
+			interrupts =	<8  IRQ_TYPE_NONE>,
+					<9  IRQ_TYPE_NONE>,
+					<10 IRQ_TYPE_NONE>;
+			gpio-ranges = <&pdc_pinctrl 0 0 7>;
+		};
+	};
+};
diff --git a/src/metag/tz1090_generic.dts b/src/metag/tz1090_generic.dts
new file mode 100644
index 000000000000..f96090955964
--- /dev/null
+++ b/src/metag/tz1090_generic.dts
@@ -0,0 +1,10 @@
+/*
+ * Copyright (C) 2012 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "tz1090.dtsi"
diff --git a/src/mips/brcm/bcm3368-netgear-cvg834g.dts b/src/mips/brcm/bcm3368-netgear-cvg834g.dts
new file mode 100644
index 000000000000..2f2e80fdcde8
--- /dev/null
+++ b/src/mips/brcm/bcm3368-netgear-cvg834g.dts
@@ -0,0 +1,22 @@
+/dts-v1/;
+
+/include/ "bcm3368.dtsi"
+
+/ {
+	compatible = "netgear,cvg834g", "brcm,bcm3368";
+	model = "NETGEAR CVG834G";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/mips/brcm/bcm3368.dtsi b/src/mips/brcm/bcm3368.dtsi
new file mode 100644
index 000000000000..bee855cb8073
--- /dev/null
+++ b/src/mips/brcm/bcm3368.dtsi
@@ -0,0 +1,101 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm3368";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <150000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		periph_cntl: syscon@fff8c000 {
+			compatible = "syscon";
+			reg = <0xfff8c000 0xc>;
+			native-endian;
+		};
+
+		reboot: syscon-reboot@fff8c008 {
+			compatible = "syscon-reboot";
+			regmap = <&periph_cntl>;
+			offset = <0x8>;
+			mask = <0x1>;
+		};
+
+		periph_intc: interrupt-controller@fff8c00c {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0xfff8c00c 0x8>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>;
+		};
+
+		uart0: serial@fff8c100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfff8c100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <2>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		uart1: serial@fff8c120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfff8c120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <3>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/mips/brcm/bcm63268-comtrend-vr-3032u.dts b/src/mips/brcm/bcm63268-comtrend-vr-3032u.dts
new file mode 100644
index 000000000000..430d35ca33d5
--- /dev/null
+++ b/src/mips/brcm/bcm63268-comtrend-vr-3032u.dts
@@ -0,0 +1,108 @@
+/dts-v1/;
+
+/include/ "bcm63268.dtsi"
+
+/ {
+	compatible = "comtrend,vr-3032u", "brcm,bcm63268";
+	model = "Comtrend VR-3032u";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&leds0 {
+	status = "ok";
+	brcm,serial-leds;
+	brcm,serial-dat-low;
+	brcm,serial-shift-inv;
+
+	led@0 {
+		reg = <0>;
+		brcm,hardware-controlled;
+		brcm,link-signal-sources = <0>;
+		/* GPHY0 Speed 0 */
+	};
+	led@1 {
+		reg = <1>;
+		brcm,hardware-controlled;
+		brcm,link-signal-sources = <1>;
+		/* GPHY0 Speed 1 */
+	};
+	led@2 {
+		reg = <2>;
+		active-low;
+		label = "vr-3032u:red:inet";
+	};
+	led@3 {
+		reg = <3>;
+		active-low;
+		label = "vr-3032u:green:dsl";
+	};
+	led@4 {
+		reg = <4>;
+		active-low;
+		label = "vr-3032u:green:usb";
+	};
+	led@7 {
+		reg = <7>;
+		active-low;
+		label = "vr-3032u:green:wps";
+	};
+	led@8 {
+		reg = <8>;
+		active-low;
+		label = "vr-3032u:green:inet";
+	};
+	led@9 {
+		reg = <9>;
+		brcm,hardware-controlled;
+		/* EPHY0 Activity */
+	};
+	led@10 {
+		reg = <10>;
+		brcm,hardware-controlled;
+		/* EPHY1 Activity */
+	};
+	led@11 {
+		reg = <11>;
+		brcm,hardware-controlled;
+		/* EPHY2 Activity */
+	};
+	led@12 {
+		reg = <12>;
+		brcm,hardware-controlled;
+		/* GPHY0 Activity */
+	};
+	led@13 {
+		reg = <13>;
+		brcm,hardware-controlled;
+		/* EPHY0 Speed */
+	};
+	led@14 {
+		reg = <14>;
+		brcm,hardware-controlled;
+		/* EPHY1 Speed */
+	};
+	led@15 {
+		reg = <15>;
+		brcm,hardware-controlled;
+		/* EPHY2 Speed */
+	};
+	led@20 {
+		reg = <20>;
+		active-low;
+		label = "vr-3032u:green:power";
+		default-state = "on";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/mips/brcm/bcm63268.dtsi b/src/mips/brcm/bcm63268.dtsi
new file mode 100644
index 000000000000..7e6bf2cc0287
--- /dev/null
+++ b/src/mips/brcm/bcm63268.dtsi
@@ -0,0 +1,134 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm63268";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <200000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		periph_cntl: syscon@10000000 {
+			compatible = "syscon";
+			reg = <0x10000000 0x14>;
+			native-endian;
+		};
+
+		reboot: syscon-reboot@10000008 {
+			compatible = "syscon-reboot";
+			regmap = <&periph_cntl>;
+			offset = <0x8>;
+			mask = <0x1>;
+		};
+
+		periph_intc: interrupt-controller@10000020 {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0x10000020 0x20>,
+			      <0x10000040 0x20>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		uart0: serial@10000180 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000180 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <5>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		uart1: serial@100001a0 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x100001a0 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <34>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		leds0: led-controller@10001900 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-leds";
+			reg = <0x10001900 0x24>;
+
+			status = "disabled";
+		};
+
+		ehci: usb@10002500 {
+			compatible = "brcm,bcm63268-ehci", "generic-ehci";
+			reg = <0x10002500 0x100>;
+			big-endian;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <10>;
+
+			status = "disabled";
+		};
+
+		ohci: usb@10002600 {
+			compatible = "brcm,bcm63268-ohci", "generic-ohci";
+			reg = <0x10002600 0x100>;
+			big-endian;
+			no-big-frame-no;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <9>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/mips/brcm/bcm6358-neufbox4-sercomm.dts b/src/mips/brcm/bcm6358-neufbox4-sercomm.dts
new file mode 100644
index 000000000000..702eae2a22a0
--- /dev/null
+++ b/src/mips/brcm/bcm6358-neufbox4-sercomm.dts
@@ -0,0 +1,47 @@
+/dts-v1/;
+
+/include/ "bcm6358.dtsi"
+
+/ {
+	compatible = "sfr,nb4-ser", "brcm,bcm6358";
+	model = "SFR Neufbox 4 (Sercomm)";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&leds0 {
+	status = "ok";
+
+	led@0 {
+		reg = <0>;
+		active-low;
+		label = "nb4-ser:white:alarm";
+	};
+	led@2 {
+		reg = <2>;
+		active-low;
+		label = "nb4-ser:white:tv";
+	};
+	led@3 {
+		reg = <3>;
+		active-low;
+		label = "nb4-ser:white:tel";
+	};
+	led@4 {
+		reg = <4>;
+		active-low;
+		label = "nb4-ser:white:adsl";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/mips/brcm/bcm6362-neufbox6-sercomm.dts b/src/mips/brcm/bcm6362-neufbox6-sercomm.dts
new file mode 100644
index 000000000000..480f2a5bf1da
--- /dev/null
+++ b/src/mips/brcm/bcm6362-neufbox6-sercomm.dts
@@ -0,0 +1,22 @@
+/dts-v1/;
+
+/include/ "bcm6362.dtsi"
+
+/ {
+	compatible = "sfr,nb6-ser", "brcm,bcm6362";
+	model = "SFR NeufBox 6 (Sercomm)";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/mips/brcm/bcm6362.dtsi b/src/mips/brcm/bcm6362.dtsi
new file mode 100644
index 000000000000..c507da594f2f
--- /dev/null
+++ b/src/mips/brcm/bcm6362.dtsi
@@ -0,0 +1,134 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm6362";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <200000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		periph_cntl: syscon@10000000 {
+			compatible = "syscon";
+			reg = <0x10000000 0x14>;
+			native-endian;
+		};
+
+		reboot: syscon-reboot@10000008 {
+			compatible = "syscon-reboot";
+			regmap = <&periph_cntl>;
+			offset = <0x8>;
+			mask = <0x1>;
+		};
+
+		periph_intc: interrupt-controller@10000020 {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0x10000020 0x10>,
+			      <0x10000030 0x10>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		uart0: serial@10000100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <3>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		uart1: serial@10000120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <4>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		leds0: led-controller@10001900 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-leds";
+			reg = <0x10001900 0x24>;
+
+			status = "disabled";
+		};
+
+		ehci: usb@10002500 {
+			compatible = "brcm,bcm6362-ehci", "generic-ehci";
+			reg = <0x10002500 0x100>;
+			big-endian;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <10>;
+
+			status = "disabled";
+		};
+
+		ohci: usb@10002600 {
+			compatible = "brcm,bcm6362-ohci", "generic-ohci";
+			reg = <0x10002600 0x100>;
+			big-endian;
+			no-big-frame-no;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <9>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/mips/brcm/bcm7125.dtsi b/src/mips/brcm/bcm7125.dtsi
index 550e1d9e3ee0..bbd00f65ce39 100644
--- a/src/mips/brcm/bcm7125.dtsi
+++ b/src/mips/brcm/bcm7125.dtsi
@@ -26,7 +26,7 @@
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -40,6 +40,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -49,7 +55,7 @@
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@441400 {
+		periph_intc: interrupt-controller@441400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x441400 0x30>, <0x441600 0x30>;
 
@@ -60,7 +66,7 @@
 			interrupts = <2>, <3>;
 		};
 
-		sun_l2_intc: sun_l2_intc@401800 {
+		sun_l2_intc: interrupt-controller@401800 {
 			compatible = "brcm,l2-intc";
 			reg = <0x401800 0x30>;
 			interrupt-controller;
@@ -81,7 +87,7 @@
 						     "avd_0", "jtag_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406780 {
+		upg_irq0_intc: interrupt-controller@406780 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
@@ -183,6 +189,26 @@
 		      status = "disabled";
 		};
 
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 18>;
+		};
+
 		ehci0: usb@488300 {
 			compatible = "brcm,bcm7125-ehci", "generic-ehci";
 			reg = <0x488300 0x100>;
diff --git a/src/mips/brcm/bcm7346.dtsi b/src/mips/brcm/bcm7346.dtsi
index ec959061d52e..4bbcc95f1c15 100644
--- a/src/mips/brcm/bcm7346.dtsi
+++ b/src/mips/brcm/bcm7346.dtsi
@@ -26,7 +26,7 @@
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -40,6 +40,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -49,7 +55,7 @@
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@411400 {
+		periph_intc: interrupt-controller@411400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x411400 0x30>, <0x411600 0x30>;
 
@@ -60,7 +66,7 @@
 			interrupts = <2>, <3>;
 		};
 
-		sun_l2_intc: sun_l2_intc@403000 {
+		sun_l2_intc: interrupt-controller@403000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x403000 0x30>;
 			interrupt-controller;
@@ -81,7 +87,7 @@
 						     "jtag_0", "svd_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406780 {
+		upg_irq0_intc: interrupt-controller@406780 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
@@ -96,7 +102,7 @@
 			interrupt-names = "upg_main", "upg_bsc";
 		};
 
-		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+		upg_aon_irq0_intc: interrupt-controller@408b80 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x408b80 0x8>;
 
@@ -210,6 +216,59 @@
 		      status = "disabled";
 		};
 
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406800 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406800 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <53>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 16>;
+		};
+
+		upg_gio_aon: gpio@408c00 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x408c00 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <27 32 2>;
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -313,6 +372,26 @@
 			status = "disabled";
 		};
 
+		hif_l2_intc: interrupt-controller@411000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <30>;
+		};
+
+		nand: nand@412800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand";
+			reg = <0x412800 0x400>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
+
 		sata: sata@181000 {
 			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 			reg-names = "ahci", "top-ctrl";
@@ -352,5 +431,13 @@
 				#phy-cells = <0>;
 			};
 		};
+
+		sdhci0: sdhci@413500 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x413500 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <85>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/src/mips/brcm/bcm7358.dtsi b/src/mips/brcm/bcm7358.dtsi
index ca57fb5eb122..3e42535c8d29 100644
--- a/src/mips/brcm/bcm7358.dtsi
+++ b/src/mips/brcm/bcm7358.dtsi
@@ -20,7 +20,7 @@
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -34,6 +34,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -43,7 +49,7 @@
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@411400 {
+		periph_intc: interrupt-controller@411400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x411400 0x30>;
 
@@ -54,7 +60,7 @@
 			interrupts = <2>;
 		};
 
-		sun_l2_intc: sun_l2_intc@403000 {
+		sun_l2_intc: interrupt-controller@403000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x403000 0x30>;
 			interrupt-controller;
@@ -75,7 +81,7 @@
 						     "avd_0", "jtag_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406600 {
+		upg_irq0_intc: interrupt-controller@406600 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406600 0x8>;
 
@@ -90,7 +96,7 @@
 			interrupt-names = "upg_main", "upg_bsc";
 		};
 
-		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+		upg_aon_irq0_intc: interrupt-controller@408b80 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x408b80 0x8>;
 
@@ -194,6 +200,59 @@
 		      status = "disabled";
 		};
 
+		pwma: pwm@406400 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406400 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406700 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406700 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408240 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408240 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <50>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406500 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406500 0xa0>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 29 4>;
+		};
+
+		upg_gio_aon: gpio@408c00 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x408c00 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <21 32 2>;
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -239,5 +298,25 @@
 			interrupts = <66>;
 			status = "disabled";
 		};
+
+		hif_l2_intc: interrupt-controller@411000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <30>;
+		};
+
+		nand: nand@412800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand";
+			reg = <0x412800 0x400>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/src/mips/brcm/bcm7360.dtsi b/src/mips/brcm/bcm7360.dtsi
index 1c0c3d438c7a..112a5571c596 100644
--- a/src/mips/brcm/bcm7360.dtsi
+++ b/src/mips/brcm/bcm7360.dtsi
@@ -20,7 +20,7 @@
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -34,6 +34,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -43,7 +49,7 @@
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@411400 {
+		periph_intc: interrupt-controller@411400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x411400 0x30>;
 
@@ -54,7 +60,7 @@
 			interrupts = <2>;
 		};
 
-		sun_l2_intc: sun_l2_intc@403000 {
+		sun_l2_intc: interrupt-controller@403000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x403000 0x30>;
 			interrupt-controller;
@@ -75,7 +81,7 @@
 						     "avd_0", "jtag_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406600 {
+		upg_irq0_intc: interrupt-controller@406600 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406600 0x8>;
 
@@ -90,7 +96,7 @@
 			interrupt-names = "upg_main", "upg_bsc";
 		};
 
-		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+		upg_aon_irq0_intc: interrupt-controller@408b80 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x408b80 0x8>;
 
@@ -194,6 +200,51 @@
 		      status = "disabled";
 		};
 
+		pwma: pwm@406400 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406400 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <50>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406500 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406500 0xa0>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 29 4>;
+		};
+
+		upg_gio_aon: gpio@408c00 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x408c00 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <21 32 2>;
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -240,6 +291,26 @@
 			status = "disabled";
 		};
 
+		hif_l2_intc: interrupt-controller@411000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <30>;
+		};
+
+		nand: nand@412800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand";
+			reg = <0x412800 0x400>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
+
 		sata: sata@181000 {
 			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 			reg-names = "ahci", "top-ctrl";
@@ -279,5 +350,13 @@
 				#phy-cells = <0>;
 			};
 		};
+
+		sdhci0: sdhci@410000 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x410000 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <82>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/src/mips/brcm/bcm7362.dtsi b/src/mips/brcm/bcm7362.dtsi
index 6b4713add4b8..34abfb0b07e7 100644
--- a/src/mips/brcm/bcm7362.dtsi
+++ b/src/mips/brcm/bcm7362.dtsi
@@ -26,7 +26,7 @@
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -40,6 +40,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -49,7 +55,7 @@
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@411400 {
+		periph_intc: interrupt-controller@411400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x411400 0x30>, <0x411600 0x30>;
 
@@ -60,7 +66,7 @@
 			interrupts = <2>, <3>;
 		};
 
-		sun_l2_intc: sun_l2_intc@403000 {
+		sun_l2_intc: interrupt-controller@403000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x403000 0x30>;
 			interrupt-controller;
@@ -81,7 +87,7 @@
 						     "avd_0", "jtag_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406600 {
+		upg_irq0_intc: interrupt-controller@406600 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406600 0x8>;
 
@@ -96,7 +102,7 @@
 			interrupt-names = "upg_main", "upg_bsc";
 		};
 
-		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+		upg_aon_irq0_intc: interrupt-controller@408b80 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x408b80 0x8>;
 
@@ -190,6 +196,51 @@
 		      status = "disabled";
 		};
 
+		pwma: pwm@406400 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406400 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <50>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406500 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406500 0xa0>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 29 4>;
+		};
+
+		upg_gio_aon: gpio@408c00 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x408c00 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <21 32 2>;
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -236,6 +287,26 @@
 			status = "disabled";
 		};
 
+		hif_l2_intc: interrupt-controller@411000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <30>;
+		};
+
+		nand: nand@412800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand";
+			reg = <0x412800 0x400>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
+
 		sata: sata@181000 {
 			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 			reg-names = "ahci", "top-ctrl";
@@ -275,5 +346,13 @@
 				#phy-cells = <0>;
 			};
 		};
+
+		sdhci0: sdhci@410000 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x410000 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <82>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/src/mips/brcm/bcm7420.dtsi b/src/mips/brcm/bcm7420.dtsi
index 0586bf662571..b143723c674e 100644
--- a/src/mips/brcm/bcm7420.dtsi
+++ b/src/mips/brcm/bcm7420.dtsi
@@ -26,7 +26,7 @@
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -40,6 +40,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -49,7 +55,7 @@
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@441400 {
+		periph_intc: interrupt-controller@441400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x441400 0x30>, <0x441600 0x30>;
 
@@ -60,7 +66,7 @@
 			interrupts = <2>, <3>;
 		};
 
-		sun_l2_intc: sun_l2_intc@401800 {
+		sun_l2_intc: interrupt-controller@401800 {
 			compatible = "brcm,l2-intc";
 			reg = <0x401800 0x30>;
 			interrupt-controller;
@@ -82,7 +88,7 @@
 						     "jtag_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406780 {
+		upg_irq0_intc: interrupt-controller@406780 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
@@ -191,6 +197,34 @@
 		      status = "disabled";
 		};
 
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406880 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406880 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 27>;
+		};
+
 		enet0: ethernet@468000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
diff --git a/src/mips/brcm/bcm7425.dtsi b/src/mips/brcm/bcm7425.dtsi
index c1c15edaf829..2488d2f61f60 100644
--- a/src/mips/brcm/bcm7425.dtsi
+++ b/src/mips/brcm/bcm7425.dtsi
@@ -26,7 +26,7 @@
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -40,6 +40,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -49,7 +55,7 @@
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@41a400 {
+		periph_intc: interrupt-controller@41a400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x41a400 0x30>, <0x41a600 0x30>;
 
@@ -60,7 +66,7 @@
 			interrupts = <2>, <3>;
 		};
 
-		sun_l2_intc: sun_l2_intc@403000 {
+		sun_l2_intc: interrupt-controller@403000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x403000 0x30>;
 			interrupt-controller;
@@ -83,7 +89,7 @@
 						     "vice_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406780 {
+		upg_irq0_intc: interrupt-controller@406780 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
@@ -98,7 +104,7 @@
 			interrupt-names = "upg_main", "upg_bsc";
 		};
 
-		upg_aon_irq0_intc: upg_aon_irq0_intc@409480 {
+		upg_aon_irq0_intc: interrupt-controller@409480 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x409480 0x8>;
 
@@ -209,6 +215,59 @@
 		      status = "disabled";
 		};
 
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406800 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406800 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <49>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 21>;
+		};
+
+		upg_gio_aon: gpio@4094c0 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x4094c0 0x40>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <18 4>;
+		};
+
 		enet0: ethernet@b80000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -312,6 +371,26 @@
 			status = "disabled";
 		};
 
+		hif_l2_intc: interrupt-controller@41a000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x41a000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <24>;
+		};
+
+		nand: nand@41b800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand";
+			reg = <0x41b800 0x400>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
+
 		sata: sata@181000 {
 			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 			reg-names = "ahci", "top-ctrl";
@@ -351,5 +430,25 @@
 				#phy-cells = <0>;
 			};
 		};
+
+		sdhci0: sdhci@419000 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x419000 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <43>;
+			sd-uhs-sdr50;
+			mmc-hs200-1_8v;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@419200 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x419200 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <44>;
+			sd-uhs-sdr50;
+			mmc-hs200-1_8v;
+			status = "disabled";
+		};
 	};
 };
diff --git a/src/mips/brcm/bcm7435.dtsi b/src/mips/brcm/bcm7435.dtsi
index a874d3a0e2ee..19fa259b968b 100644
--- a/src/mips/brcm/bcm7435.dtsi
+++ b/src/mips/brcm/bcm7435.dtsi
@@ -38,7 +38,7 @@
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -52,6 +52,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -61,7 +67,7 @@
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@41b500 {
+		periph_intc: interrupt-controller@41b500 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x41b500 0x40>, <0x41b600 0x40>,
 				<0x41b700 0x40>, <0x41b800 0x40>;
@@ -73,7 +79,7 @@
 			interrupts = <2>, <3>, <2>, <3>;
 		};
 
-		sun_l2_intc: sun_l2_intc@403000 {
+		sun_l2_intc: interrupt-controller@403000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x403000 0x30>;
 			interrupt-controller;
@@ -98,7 +104,7 @@
 						     "scpu";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406780 {
+		upg_irq0_intc: interrupt-controller@406780 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
@@ -113,7 +119,7 @@
 			interrupt-names = "upg_main", "upg_bsc";
 		};
 
-		upg_aon_irq0_intc: upg_aon_irq0_intc@409480 {
+		upg_aon_irq0_intc: interrupt-controller@409480 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x409480 0x8>;
 
@@ -224,6 +230,59 @@
 		      status = "disabled";
 		};
 
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406800 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406800 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <54>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 21>;
+		};
+
+		upg_gio_aon: gpio@4094c0 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x4094c0 0x40>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <18 4>;
+		};
+
 		enet0: ethernet@b80000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -327,6 +386,26 @@
 			status = "disabled";
 		};
 
+		hif_l2_intc: interrupt-controller@41b000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x41b000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <24>;
+		};
+
+		nand: nand@41c800 {
+			compatible = "brcm,brcmnand-v6.2", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand", "flash-dma";
+			reg = <0x41c800 0x600>, <0x41d000 0x100>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>, <4>;
+			status = "disabled";
+		};
+
 		sata: sata@181000 {
 			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 			reg-names = "ahci", "top-ctrl";
@@ -366,5 +445,25 @@
 				#phy-cells = <0>;
 			};
 		};
+
+		sdhci0: sdhci@41a000 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x41a000 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <47>;
+			sd-uhs-sdr50;
+			mmc-hs200-1_8v;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@41a200 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x41a200 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <48>;
+			sd-uhs-sdr50;
+			mmc-hs200-1_8v;
+			status = "disabled";
+		};
 	};
 };
diff --git a/src/mips/brcm/bcm97125cbmb.dts b/src/mips/brcm/bcm97125cbmb.dts
index f2449d147c6d..5c24eacd72dd 100644
--- a/src/mips/brcm/bcm97125cbmb.dts
+++ b/src/mips/brcm/bcm97125cbmb.dts
@@ -45,6 +45,10 @@
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
 /* FIXME: USB is wonky; disable it for now */
 &ehci0 {
 	status = "disabled";
diff --git a/src/mips/brcm/bcm97346dbsmb.dts b/src/mips/brcm/bcm97346dbsmb.dts
index d3d28816a027..e67eaf30de3d 100644
--- a/src/mips/brcm/bcm97346dbsmb.dts
+++ b/src/mips/brcm/bcm97346dbsmb.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "bcm7346.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
 
 / {
 	compatible = "brcm,bcm97346dbsmb", "brcm,bcm7346";
@@ -49,6 +50,14 @@
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -85,6 +94,10 @@
 	status = "okay";
 };
 
+&nand {
+	status = "okay";
+};
+
 &sata {
 	status = "okay";
 };
@@ -92,3 +105,7 @@
 &sata_phy {
 	status = "okay";
 };
+
+&sdhci0 {
+	status = "okay";
+};
diff --git a/src/mips/brcm/bcm97358svmb.dts b/src/mips/brcm/bcm97358svmb.dts
index 02ce6b429dc4..ee4607fae47a 100644
--- a/src/mips/brcm/bcm97358svmb.dts
+++ b/src/mips/brcm/bcm97358svmb.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "bcm7358.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch4.dtsi"
 
 / {
 	compatible = "brcm,bcm97358svmb", "brcm,bcm7358";
@@ -45,6 +46,14 @@
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -56,3 +65,7 @@
 &ohci0 {
 	status = "okay";
 };
+
+&nand {
+	status = "okay";
+};
diff --git a/src/mips/brcm/bcm97360svmb.dts b/src/mips/brcm/bcm97360svmb.dts
index 73124be9548a..bed821b03013 100644
--- a/src/mips/brcm/bcm97360svmb.dts
+++ b/src/mips/brcm/bcm97360svmb.dts
@@ -45,6 +45,10 @@
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -64,3 +68,7 @@
 &sata_phy {
 	status = "okay";
 };
+
+&sdhci0 {
+	status = "okay";
+};
diff --git a/src/mips/brcm/bcm97362svmb.dts b/src/mips/brcm/bcm97362svmb.dts
index 3cfcaebe7f79..68fd823868e0 100644
--- a/src/mips/brcm/bcm97362svmb.dts
+++ b/src/mips/brcm/bcm97362svmb.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "bcm7362.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch4.dtsi"
 
 / {
 	compatible = "brcm,bcm97362svmb", "brcm,bcm7362";
@@ -41,6 +42,10 @@
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -53,6 +58,10 @@
 	status = "okay";
 };
 
+&nand {
+	status = "okay";
+};
+
 &sata {
 	status = "okay";
 };
@@ -60,3 +69,7 @@
 &sata_phy {
 	status = "okay";
 };
+
+&sdhci0 {
+	status = "okay";
+};
diff --git a/src/mips/brcm/bcm97420c.dts b/src/mips/brcm/bcm97420c.dts
index 600d57abee05..e66271af055e 100644
--- a/src/mips/brcm/bcm97420c.dts
+++ b/src/mips/brcm/bcm97420c.dts
@@ -51,6 +51,14 @@
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
 /* FIXME: MAC driver comes up but cannot attach to PHY */
 &enet0 {
 	status = "disabled";
diff --git a/src/mips/brcm/bcm97425svmb.dts b/src/mips/brcm/bcm97425svmb.dts
index 119c714805cb..f95ba1bf3e58 100644
--- a/src/mips/brcm/bcm97425svmb.dts
+++ b/src/mips/brcm/bcm97425svmb.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "bcm7425.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
 
 / {
 	compatible = "brcm,bcm97425svmb", "brcm,bcm7425";
@@ -51,6 +52,14 @@
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -86,3 +95,15 @@
 &ohci3 {
 	status = "okay";
 };
+
+&nand {
+	status = "okay";
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+};
diff --git a/src/mips/brcm/bcm97435svmb.dts b/src/mips/brcm/bcm97435svmb.dts
index 43e3ba27f07b..fb37b7111bf4 100644
--- a/src/mips/brcm/bcm97435svmb.dts
+++ b/src/mips/brcm/bcm97435svmb.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "bcm7435.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
 
 / {
 	compatible = "brcm,bcm97435svmb", "brcm,bcm7435";
@@ -51,6 +52,14 @@
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -87,6 +96,10 @@
 	status = "okay";
 };
 
+&nand {
+	status = "okay";
+};
+
 &sata {
 	status = "okay";
 };
@@ -94,3 +107,11 @@
 &sata_phy {
 	status = "okay";
 };
+
+&sdhci0 {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+};
diff --git a/src/mips/brcm/bcm97xxx-nand-cs1-bch24.dtsi b/src/mips/brcm/bcm97xxx-nand-cs1-bch24.dtsi
new file mode 100644
index 000000000000..3c24f97de922
--- /dev/null
+++ b/src/mips/brcm/bcm97xxx-nand-cs1-bch24.dtsi
@@ -0,0 +1,25 @@
+&nand {
+	nandcs@1 {
+		compatible = "brcm,nandcs";
+		reg = <1>;
+		nand-on-flash-bbt;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+		brcm,nand-oob-sector-size = <27>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1.rootfs@0 {
+				reg = <0x0 0x10000000>;
+			};
+
+			flash1.kernel@10000000 {
+				reg = <0x10000000 0x400000>;
+			};
+		};
+	};
+};
diff --git a/src/mips/brcm/bcm97xxx-nand-cs1-bch4.dtsi b/src/mips/brcm/bcm97xxx-nand-cs1-bch4.dtsi
new file mode 100644
index 000000000000..cb531816ef4c
--- /dev/null
+++ b/src/mips/brcm/bcm97xxx-nand-cs1-bch4.dtsi
@@ -0,0 +1,25 @@
+&nand {
+	nandcs@1 {
+		compatible = "brcm,nandcs";
+		reg = <1>;
+		nand-on-flash-bbt;
+
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		brcm,nand-oob-sector-size = <16>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1.rootfs@0 {
+				reg = <0x0 0x10000000>;
+			};
+
+			flash1.kernel@10000000 {
+				reg = <0x10000000 0x400000>;
+			};
+		};
+	};
+};
diff --git a/src/mips/cavium-octeon/dlink_dsr-1000n.dts b/src/mips/cavium-octeon/dlink_dsr-1000n.dts
index d6bc994f736f..cfa29156eb69 100644
--- a/src/mips/cavium-octeon/dlink_dsr-1000n.dts
+++ b/src/mips/cavium-octeon/dlink_dsr-1000n.dts
@@ -8,54 +8,16 @@
  * published by the Free Software Foundation.
  */
 
-/include/ "octeon_3xxx.dtsi"
+/include/ "dlink_dsr-500n-1000n.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "dlink,dsr-1000n";
 
 	soc@0 {
-		smi0: mdio@1180000001800 {
-			phy8: ethernet-phy@8 {
-				reg = <8>;
-				compatible = "ethernet-phy-ieee802.3-c22";
-			};
-		};
-
-		pip: pip@11800a0000000 {
-			interface@0 {
-				ethernet@0 {
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-				ethernet@1 {
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-				ethernet@2 {
-					phy-handle = <&phy8>;
-				};
-			};
-		};
-
-		twsi0: i2c@1180000001000 {
-			rtc@68 {
-				compatible = "dallas,ds1337";
-				reg = <0x68>;
-			};
-		};
-
 		uart0: serial@1180000000800 {
 			clock-frequency = <500000000>;
 		};
-
-		usbn: usbn@1180068000000 {
-			refclk-frequency = <12000000>;
-			refclk-type = "crystal";
-		};
 	};
 
 	leds {
@@ -63,16 +25,27 @@
 
 		usb1 {
 			label = "usb1";
-			gpios = <&gpio 9 1>; /* Active low */
+			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 		};
 
 		usb2 {
 			label = "usb2";
-			gpios = <&gpio 10 1>; /* Active low */
+			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 		};
-	};
 
-	aliases {
-		pip = &pip;
+		wireless1 {
+			label = "5g";
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+		};
+
+		wireless2 {
+			label = "2.4g";
+			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+		};
 	};
 };
diff --git a/src/mips/cavium-octeon/dlink_dsr-500n-1000n.dtsi b/src/mips/cavium-octeon/dlink_dsr-500n-1000n.dtsi
new file mode 100644
index 000000000000..246b598201f8
--- /dev/null
+++ b/src/mips/cavium-octeon/dlink_dsr-500n-1000n.dtsi
@@ -0,0 +1,58 @@
+/*
+ * Device tree source for D-Link DSR-500N/1000N (common parts).
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "octeon_3xxx.dtsi"
+
+/ {
+	soc@0 {
+		smi0: mdio@1180000001800 {
+			phy8: ethernet-phy@8 {
+				reg = <8>;
+				compatible = "ethernet-phy-ieee802.3-c22";
+			};
+		};
+
+		pip: pip@11800a0000000 {
+			interface@0 {
+				ethernet@0 {
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+				ethernet@1 {
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+				ethernet@2 {
+					phy-handle = <&phy8>;
+				};
+			};
+		};
+
+		twsi0: i2c@1180000001000 {
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+		};
+
+		usbn: usbn@1180068000000 {
+			refclk-frequency = <12000000>;
+			refclk-type = "crystal";
+		};
+	};
+
+	aliases {
+		pip = &pip;
+	};
+};
diff --git a/src/mips/cavium-octeon/dlink_dsr-500n.dts b/src/mips/cavium-octeon/dlink_dsr-500n.dts
new file mode 100644
index 000000000000..78886e172c48
--- /dev/null
+++ b/src/mips/cavium-octeon/dlink_dsr-500n.dts
@@ -0,0 +1,40 @@
+/*
+ * Device tree source for D-Link DSR-500N.
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "dlink_dsr-500n-1000n.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "dlink,dsr-500n";
+	compatible = "dlink,dsr-500n", "cavium,octeon-3860";
+
+	soc@0 {
+		uart0: serial@1180000000800 {
+			clock-frequency = <300000000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		usb {
+			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+
+		wireless {
+			label = "2.4g";
+			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/src/mips/cavium-octeon/octeon_3xxx.dts b/src/mips/cavium-octeon/octeon_3xxx.dts
index de61f02d3ef6..ca6b4467bcd3 100644
--- a/src/mips/cavium-octeon/octeon_3xxx.dts
+++ b/src/mips/cavium-octeon/octeon_3xxx.dts
@@ -388,16 +388,4 @@
 		usbn = &usbn;
 		led0 = &led0;
 	};
-
-	dsr1000n-leds {
-		compatible = "gpio-leds";
-		usb1 {
-			label = "usb1";
-			gpios = <&gpio 9 1>; /* Active low */
-		};
-		usb2 {
-			label = "usb2";
-			gpios = <&gpio 10 1>; /* Active low */
-		};
-	};
  };
diff --git a/src/mips/ingenic/jz4740.dtsi b/src/mips/ingenic/jz4740.dtsi
index f6ae6ed9c4b1..3e1587f1f77a 100644
--- a/src/mips/ingenic/jz4740.dtsi
+++ b/src/mips/ingenic/jz4740.dtsi
@@ -44,6 +44,17 @@
 		#clock-cells = <1>;
 	};
 
+	rtc_dev: rtc@10003000 {
+		compatible = "ingenic,jz4740-rtc";
+		reg = <0x10003000 0x40>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <15>;
+
+		clocks = <&cgu JZ4740_CLK_RTC>;
+		clock-names = "rtc";
+	};
+
 	uart0: serial@10030000 {
 		compatible = "ingenic,jz4740-uart";
 		reg = <0x10030000 0x100>;
diff --git a/src/mips/ingenic/qi_lb60.dts b/src/mips/ingenic/qi_lb60.dts
index 2414d63ae818..be1a7d3a3e1b 100644
--- a/src/mips/ingenic/qi_lb60.dts
+++ b/src/mips/ingenic/qi_lb60.dts
@@ -13,3 +13,7 @@
 &ext {
 	clock-frequency = <12000000>;
 };
+
+&rtc_dev {
+	system-power-controller;
+};
diff --git a/src/mips/mti/malta.dts b/src/mips/mti/malta.dts
index b18c46637d21..ffe3a1508e72 100644
--- a/src/mips/mti/malta.dts
+++ b/src/mips/mti/malta.dts
@@ -1,5 +1,8 @@
 /dts-v1/;
 
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
 /memreserve/ 0x00000000 0x00001000;	/* YAMON exception vectors */
 /memreserve/ 0x00001000 0x000ef000;	/* YAMON */
 /memreserve/ 0x000f0000 0x00010000;	/* PIIX4 ISA memory */
@@ -8,4 +11,101 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 	compatible = "mti,malta";
+
+	cpu_intc: interrupt-controller {
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	gic: interrupt-controller@1bdc0000 {
+		compatible = "mti,gic";
+		reg = <0x1bdc0000 0x20000>;
+
+		interrupt-controller;
+		#interrupt-cells = <3>;
+
+		/*
+		 * Declare the interrupt-parent even though the mti,gic
+		 * binding doesn't require it, such that the kernel can
+		 * figure out that cpu_intc is the root interrupt
+		 * controller & should be probed first.
+		 */
+		interrupt-parent = <&cpu_intc>;
+
+		timer {
+			compatible = "mti,gic-timer";
+			interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+		};
+	};
+
+	i8259: interrupt-controller@20 {
+		compatible = "intel,i8259";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	flash@1e000000 {
+		compatible = "intel,dt28f160", "cfi-flash";
+		reg = <0x1e000000 0x400000>;
+		bank-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			yamon@0 {
+				label = "YAMON";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			user-fs@100000 {
+				label = "User FS";
+				reg = <0x100000 0x2e0000>;
+			};
+
+			board-config@3e0000 {
+				label = "Board Config";
+				reg = <0x3e0000 0x20000>;
+				read-only;
+			};
+		};
+	};
+
+	fpga_regs: system-controller@1f000000 {
+		compatible = "mti,malta-fpga", "syscon", "simple-mfd";
+		reg = <0x1f000000 0x1000>;
+		native-endian;
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&fpga_regs>;
+			offset = <0x500>;
+			mask = <0x42>;
+		};
+	};
+
+	isa {
+		compatible = "isa";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <1 0 0 0x1000>;
+
+		rtc@70 {
+			compatible = "motorola,mc146818";
+			reg = <1 0x70 0x8>;
+
+			interrupt-parent = <&i8259>;
+			interrupts = <8>;
+		};
+	};
 };
diff --git a/src/mips/mti/sead3.dts b/src/mips/mti/sead3.dts
index e4b317d414f1..b112879a5d9d 100644
--- a/src/mips/mti/sead3.dts
+++ b/src/mips/mti/sead3.dts
@@ -4,10 +4,23 @@
 /memreserve/ 0x00001000 0x000ef000;	// ROM data
 /memreserve/ 0x000f0000 0x004cc000;	// reserved
 
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	compatible = "mti,sead-3";
+	model = "MIPS SEAD-3";
+	interrupt-parent = <&gic>;
+
+	chosen {
+		stdout-path = "uart1:115200";
+	};
+
+	aliases {
+		uart0 = &uart0;
+		uart1 = &uart1;
+	};
 
 	cpus {
 		cpu@0 {
@@ -19,4 +32,229 @@
 		device_type = "memory";
 		reg = <0x0 0x08000000>;
 	};
+
+	cpu_intc: interrupt-controller {
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	gic: interrupt-controller@1b1c0000 {
+		compatible = "mti,gic";
+		reg = <0x1b1c0000 0x20000>;
+
+		interrupt-controller;
+		#interrupt-cells = <3>;
+
+		/*
+		 * Declare the interrupt-parent even though the mti,gic
+		 * binding doesn't require it, such that the kernel can
+		 * figure out that cpu_intc is the root interrupt
+		 * controller & should be probed first.
+		 */
+		interrupt-parent = <&cpu_intc>;
+
+		timer {
+			compatible = "mti,gic-timer";
+			interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+		};
+	};
+
+	ehci@1b200000 {
+		compatible = "generic-ehci";
+		reg = <0x1b200000 0x1000>;
+
+		interrupts = <0>; /* GIC 0 or CPU 6 */
+
+		has-transaction-translator;
+	};
+
+	flash@1c000000 {
+		compatible = "intel,28f128j3", "cfi-flash";
+		reg = <0x1c000000 0x2000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			user-fs@0 {
+				label = "User FS";
+				reg = <0x0 0x1fc0000>;
+			};
+
+			board-config@3e0000 {
+				label = "Board Config";
+				reg = <0x1fc0000 0x40000>;
+			};
+		};
+	};
+
+	fpga_regs: system-controller@1f000000 {
+		compatible = "mti,sead3-fpga", "syscon", "simple-mfd";
+		reg = <0x1f000000 0x200>;
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&fpga_regs>;
+			offset = <0x50>;
+			mask = <0x4d>;
+		};
+
+		poweroff {
+			compatible = "restart-poweroff";
+		};
+	};
+
+	system-controller@1f000200 {
+		compatible = "mti,sead3-cpld", "syscon", "simple-mfd";
+		reg = <0x1f000200 0x300>;
+
+		led@10.0 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x1>;
+			label = "pled0";
+		};
+		led@10.1 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x2>;
+			label = "pled1";
+		};
+		led@10.2 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x4>;
+			label = "pled2";
+		};
+		led@10.3 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x8>;
+			label = "pled3";
+		};
+		led@10.4 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x10>;
+			label = "pled4";
+		};
+		led@10.5 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x20>;
+			label = "pled5";
+		};
+		led@10.6 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x40>;
+			label = "pled6";
+		};
+		led@10.7 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x80>;
+			label = "pled7";
+		};
+
+		led@18.0 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x1>;
+			label = "fled0";
+		};
+		led@18.1 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x2>;
+			label = "fled1";
+		};
+		led@18.2 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x4>;
+			label = "fled2";
+		};
+		led@18.3 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x8>;
+			label = "fled3";
+		};
+		led@18.4 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x10>;
+			label = "fled4";
+		};
+		led@18.5 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x20>;
+			label = "fled5";
+		};
+		led@18.6 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x40>;
+			label = "fled6";
+		};
+		led@18.7 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x80>;
+			label = "fled7";
+		};
+
+		lcd@200 {
+			compatible = "mti,sead3-lcd";
+			offset = <0x200>;
+		};
+	};
+
+	/* UART connected to FTDI & miniUSB socket */
+	uart0: uart@1f000900 {
+		compatible = "ns16550a";
+		reg = <0x1f000900 0x20>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+
+		clock-frequency = <14745600>;
+
+		interrupts = <3>; /* GIC 3 or CPU 4 */
+
+		no-loopback-test;
+	};
+
+	/* UART connected to RS232 socket */
+	uart1: uart@1f000800 {
+		compatible = "ns16550a";
+		reg = <0x1f000800 0x20>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+
+		clock-frequency = <14745600>;
+
+		interrupts = <2>; /* GIC 2 or CPU 4 */
+
+		no-loopback-test;
+	};
+
+	eth@1f010000 {
+		compatible = "smsc,lan9115";
+		reg = <0x1f010000 0x10000>;
+		reg-io-width = <4>;
+
+		interrupts = <0>; /* GIC 0 or CPU 6 */
+
+		phy-mode = "mii";
+		smsc,irq-push-pull;
+		smsc,save-mac-address;
+	};
 };
diff --git a/src/nios2/10m50_devboard.dts b/src/nios2/10m50_devboard.dts
new file mode 100755
index 000000000000..f362b2224ee7
--- /dev/null
+++ b/src/nios2/10m50_devboard.dts
@@ -0,0 +1,249 @@
+/*
+ * Copyright (C) 2015 Altera Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "Altera NiosII Max10";
+	compatible = "altr,niosii-max10";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu: cpu@0 {
+			device_type = "cpu";
+			compatible = "altr,nios2-1.1";
+			reg = <0x00000000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			altr,exception-addr = <0xc8000120>;
+			altr,fast-tlb-miss-addr = <0xc0000100>;
+			altr,has-div = <1>;
+			altr,has-initda = <1>;
+			altr,has-mmu = <1>;
+			altr,has-mul = <1>;
+			altr,implementation = "fast";
+			altr,pid-num-bits = <8>;
+			altr,reset-addr = <0xd4000000>;
+			altr,tlb-num-entries = <256>;
+			altr,tlb-num-ways = <16>;
+			altr,tlb-ptr-sz = <8>;
+			clock-frequency = <75000000>;
+			dcache-line-size = <32>;
+			dcache-size = <32768>;
+			icache-line-size = <32>;
+			icache-size = <32768>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x08000000 0x08000000>,
+			<0x00000000 0x00000400>;
+	};
+
+	sopc0: sopc@0 {
+		device_type = "soc";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "altr,avalon", "simple-bus";
+		bus-frequency = <75000000>;
+
+		jtag_uart: serial@18001530 {
+			compatible = "altr,juart-1.0";
+			reg = <0x18001530 0x00000008>;
+			interrupt-parent = <&cpu>;
+			interrupts = <7>;
+		};
+
+		a_16550_uart_0: serial@18001600 {
+			compatible = "altr,16550-FIFO32", "ns16550a";
+			reg = <0x18001600 0x00000200>;
+			interrupt-parent = <&cpu>;
+			interrupts = <1>;
+			auto-flow-control = <1>;
+			clock-frequency = <50000000>;
+			fifo-size = <32>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			tx-threshold = <16>;
+		};
+
+		sysid: sysid@18001528 {
+			compatible = "altr,sysid-1.0";
+			reg = <0x18001528 0x00000008>;
+			id = <4207856382>;
+			timestamp = <1431309290>;
+		};
+
+		rgmii_0_eth_tse_0: ethernet@400 {
+			compatible = "altr,tse-msgdma-1.0", "altr,tse-1.0";
+			reg = <0x00000400 0x00000400>,
+				<0x00000820 0x00000020>,
+				<0x00000800 0x00000020>,
+				<0x000008c0 0x00000008>,
+				<0x00000840 0x00000020>,
+				<0x00000860 0x00000020>;
+			reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc";
+			interrupt-parent = <&cpu>;
+			interrupts = <2 3>;
+			interrupt-names = "rx_irq", "tx_irq";
+			rx-fifo-depth = <8192>;
+			tx-fifo-depth = <8192>;
+			address-bits = <48>;
+			max-frame-size = <1518>;
+			local-mac-address = [00 00 00 00 00 00];
+			altr,has-supplementary-unicast;
+			altr,enable-sup-addr = <1>;
+			altr,has-hash-multicast-filter;
+			altr,enable-hash = <1>;
+			phy-mode = "rgmii-id";
+			phy-handle = <&phy0>;
+			rgmii_0_eth_tse_0_mdio: mdio {
+				compatible = "altr,tse-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+					device_type = "ethernet-phy";
+				};
+			};
+		};
+
+		enet_pll: clock@0 {
+			compatible = "altr,pll-1.0";
+			#clock-cells = <1>;
+
+			enet_pll_c0: enet_pll_c0 {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <125000000>;
+				clock-output-names = "enet_pll-c0";
+			};
+
+			enet_pll_c1: enet_pll_c1 {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <25000000>;
+				clock-output-names = "enet_pll-c1";
+			};
+
+			enet_pll_c2: enet_pll_c2 {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <2500000>;
+				clock-output-names = "enet_pll-c2";
+			};
+		};
+
+		sys_pll: clock@1 {
+			compatible = "altr,pll-1.0";
+			#clock-cells = <1>;
+
+			sys_pll_c0: sys_pll_c0 {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <100000000>;
+				clock-output-names = "sys_pll-c0";
+			};
+
+			sys_pll_c1: sys_pll_c1 {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <50000000>;
+				clock-output-names = "sys_pll-c1";
+			};
+
+			sys_pll_c2: sys_pll_c2 {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <75000000>;
+				clock-output-names = "sys_pll-c2";
+			};
+		};
+
+		sys_clk_timer: timer@18001440 {
+			compatible = "altr,timer-1.0";
+			reg = <0x18001440 0x00000020>;
+			interrupt-parent = <&cpu>;
+			interrupts = <0>;
+			clock-frequency = <75000000>;
+		};
+
+		led_pio: gpio@180014d0 {
+			compatible = "altr,pio-1.0";
+			reg = <0x180014d0 0x00000010>;
+			altr,gpio-bank-width = <4>;
+			resetvalue = <15>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		button_pio: gpio@180014c0 {
+			compatible = "altr,pio-1.0";
+			reg = <0x180014c0 0x00000010>;
+			interrupt-parent = <&cpu>;
+			interrupts = <6>;
+			altr,gpio-bank-width = <3>;
+			altr,interrupt-type = <2>;
+			edge_type = <1>;
+			level_trigger = <0>;
+			resetvalue = <0>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		sys_clk_timer_1: timer@880 {
+			compatible = "altr,timer-1.0";
+			reg = <0x00000880 0x00000020>;
+			interrupt-parent = <&cpu>;
+			interrupts = <5>;
+			clock-frequency = <75000000>;
+		};
+
+		fpga_leds: leds {
+			compatible = "gpio-leds";
+
+			led_fpga0: fpga0 {
+				label = "fpga_led0";
+				gpios = <&led_pio 0 1>;
+			};
+
+			led_fpga1: fpga1 {
+				label = "fpga_led1";
+				gpios = <&led_pio 1 1>;
+			};
+
+			led_fpga2: fpga2 {
+				label = "fpga_led2";
+				gpios = <&led_pio 2 1>;
+			};
+
+			led_fpga3: fpga3 {
+				label = "fpga_led3";
+				gpios = <&led_pio 3 1>;
+			};
+		};
+	};
+
+	chosen {
+		bootargs = "debug console=ttyS0,115200";
+	};
+};
diff --git a/src/nios2/3c120_devboard.dts b/src/nios2/3c120_devboard.dts
new file mode 100644
index 000000000000..31c51f9a2f09
--- /dev/null
+++ b/src/nios2/3c120_devboard.dts
@@ -0,0 +1,164 @@
+/*
+ *  Copyright (C) 2013 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * This file is generated by sopc2dts.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "altr,qsys_ghrd_3c120";
+	compatible = "altr,qsys_ghrd_3c120";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu: cpu@0x0 {
+			device_type = "cpu";
+			compatible = "altr,nios2-1.0";
+			reg = <0x00000000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			clock-frequency = <125000000>;
+			dcache-line-size = <32>;
+			icache-line-size = <32>;
+			dcache-size = <32768>;
+			icache-size = <32768>;
+			altr,implementation = "fast";
+			altr,pid-num-bits = <8>;
+			altr,tlb-num-ways = <16>;
+			altr,tlb-num-entries = <128>;
+			altr,tlb-ptr-sz = <7>;
+			altr,has-div = <1>;
+			altr,has-mul = <1>;
+			altr,reset-addr = <0xc2800000>;
+			altr,fast-tlb-miss-addr = <0xc7fff400>;
+			altr,exception-addr = <0xd0000020>;
+			altr,has-initda = <1>;
+			altr,has-mmu = <1>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x10000000 0x08000000>,
+			<0x07fff400 0x00000400>;
+	};
+
+	sopc@0 {
+		device_type = "soc";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "altr,avalon", "simple-bus";
+		bus-frequency = <125000000>;
+
+		pb_cpu_to_io: bridge@0x8000000 {
+			compatible = "simple-bus";
+			reg = <0x08000000 0x00800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00002000 0x08002000 0x00002000>,
+				<0x00004000 0x08004000 0x00000400>,
+				<0x00004400 0x08004400 0x00000040>,
+				<0x00004800 0x08004800 0x00000040>,
+				<0x00004c80 0x08004c80 0x00000020>,
+				<0x00004d50 0x08004d50 0x00000008>,
+				<0x00008000 0x08008000 0x00000020>,
+				<0x00400000 0x08400000 0x00000020>;
+
+			timer_1ms: timer@0x400000 {
+				compatible = "altr,timer-1.0";
+				reg = <0x00400000 0x00000020>;
+				interrupt-parent = <&cpu>;
+				interrupts = <11>;
+				clock-frequency = <125000000>;
+			};
+
+			timer_0: timer@0x8000 {
+				compatible = "altr,timer-1.0";
+				reg = < 0x00008000 0x00000020 >;
+				interrupt-parent = < &cpu >;
+				interrupts = < 5 >;
+				clock-frequency = < 125000000 >;
+			};
+
+			jtag_uart: serial@0x4d50 {
+				compatible = "altr,juart-1.0";
+				reg = <0x00004d50 0x00000008>;
+				interrupt-parent = <&cpu>;
+				interrupts = <1>;
+			};
+
+			tse_mac: ethernet@0x4000 {
+				compatible = "altr,tse-1.0";
+				reg = <0x00004000 0x00000400>,
+					<0x00004400 0x00000040>,
+					<0x00004800 0x00000040>,
+					<0x00002000 0x00002000>;
+				reg-names = "control_port", "rx_csr", "tx_csr", "s1";
+				interrupt-parent = <&cpu>;
+				interrupts = <2 3>;
+				interrupt-names = "rx_irq", "tx_irq";
+				rx-fifo-depth = <8192>;
+				tx-fifo-depth = <8192>;
+				max-frame-size = <1518>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				phy-mode = "rgmii-id";
+				phy-handle = <&phy0>;
+				tse_mac_mdio: mdio {
+					compatible = "altr,tse-mdio";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					phy0: ethernet-phy@18 {
+						reg = <18>;
+						device_type = "ethernet-phy";
+					};
+				};
+			};
+
+			uart: serial@0x4c80 {
+				compatible = "altr,uart-1.0";
+				reg = <0x00004c80 0x00000020>;
+				interrupt-parent = <&cpu>;
+				interrupts = <10>;
+				current-speed = <115200>;
+				clock-frequency = <62500000>;
+			};
+		};
+
+		cfi_flash_64m: flash@0x0 {
+			compatible = "cfi-flash";
+			reg = <0x00000000 0x04000000>;
+			bank-width = <2>;
+			device-width = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@800000 {
+				reg = <0x00800000 0x01e00000>;
+				label = "JFFS2 Filesystem";
+			};
+		};
+	};
+
+	chosen {
+		bootargs = "debug console=ttyJ0,115200";
+	};
+};
diff --git a/src/openrisc/or1ksim.dts b/src/openrisc/or1ksim.dts
new file mode 100644
index 000000000000..5d4f9027afaf
--- /dev/null
+++ b/src/openrisc/or1ksim.dts
@@ -0,0 +1,50 @@
+/dts-v1/;
+/ {
+	compatible = "opencores,or1ksim";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&pic>;
+
+	chosen {
+		bootargs = "console=uart,mmio,0x90000000,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "opencores,or1200-rtlsvn481";
+			reg = <0>;
+			clock-frequency = <20000000>;
+		};
+	};
+
+	/*
+	 * OR1K PIC is built into CPU and accessed via special purpose
+	 * registers.  It is not addressable and, hence, has no 'reg'
+	 * property.
+	 */
+	pic: pic {
+		compatible = "opencores,or1k-pic";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+	};
+
+	serial0: serial@90000000 {
+		compatible = "opencores,uart16550-rtlsvn105", "ns16550a";
+		reg = <0x90000000 0x100>;
+		interrupts = <2>;
+		clock-frequency = <20000000>;
+	};
+
+	enet0: ethoc@92000000 {
+		compatible = "opencores,ethmac-rtlsvn338";
+		reg = <0x92000000 0x100>;
+		interrupts = <4>;
+	};
+};
diff --git a/src/powerpc/a3m071.dts b/src/powerpc/a3m071.dts
new file mode 100644
index 000000000000..bf81b8f9704c
--- /dev/null
+++ b/src/powerpc/a3m071.dts
@@ -0,0 +1,142 @@
+/*
+ * a3m071 board Device Tree Source
+ *
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ *
+ * Copyright (C) 2011 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 { fsl,has-wdt; };
+
+/ {
+	model = "anonymous,a3m071";
+	compatible = "anonymous,a3m071";
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200b-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>; /* From boot loader */
+		system-frequency = <0>; /* From boot loader */
+
+		spi@f00 {
+			status = "disabled";
+		};
+
+		usb: usb@1000 {
+			status = "disabled";
+		};
+
+		psc@2000 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		psc@2200 {
+			status = "disabled";
+		};
+
+		psc@2400 {
+			status = "disabled";
+		};
+
+		psc@2600 {
+			status = "disabled";
+		};
+
+		psc@2800 {
+			status = "disabled";
+		};
+
+		psc@2c00 {		// PSC6
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2c00 0x100>;
+			interrupts = <2 4 0>;
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@3 {
+				reg = <0x03>;
+			};
+		};
+
+		ata@3a00 {
+			status = "disabled";
+		};
+
+		i2c@3d00 {
+			status = "disabled";
+		};
+
+		i2c@3d40 {
+			status = "disabled";
+		};
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200b-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xfc000000 0x02000000
+			  3 0 0xe9000000 0x00080000
+			  5 0 0xe8000000 0x00010000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0x0 0x02000000>;
+			compatible = "cfi-flash";
+			bank-width = <2>;
+			partition@0x0 {
+				label = "u-boot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@0x00040000 {
+				label = "env";
+				reg = <0x00040000 0x00020000>;
+			};
+			partition@0x00060000 {
+				label = "dtb";
+				reg = <0x00060000 0x00020000>;
+			};
+			partition@0x00080000 {
+				label = "kernel";
+				reg = <0x00080000 0x00500000>;
+			};
+			partition@0x00580000 {
+				label = "root";
+				reg = <0x00580000 0x00A80000>;
+			};
+		};
+
+		fpga@3,0 {
+			compatible = "anonymous,a3m071-fpga";
+			reg = <3 0x0 0x00080000
+			       5 0x0 0x00010000>;
+			interrupts = <0 0 3>;  /* level low */
+		};
+	};
+
+	pci@f0000d00 {
+		status = "disabled";
+	};
+};
diff --git a/src/powerpc/a4m072.dts b/src/powerpc/a4m072.dts
new file mode 100644
index 000000000000..1f02034c7e99
--- /dev/null
+++ b/src/powerpc/a4m072.dts
@@ -0,0 +1,151 @@
+/*
+ * a4m072 board Device Tree Source
+ *
+ * Copyright (C) 2011 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 { fsl,has-wdt; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+
+/ {
+	model = "anonymous,a4m072";
+	compatible = "anonymous,a4m072";
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200b-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>; /* From boot loader */
+		system-frequency = <0>; /* From boot loader */
+
+		cdm@200 {
+			fsl,init-ext-48mhz-en = <0x0>;
+			fsl,init-fd-enable = <0x01>;
+			fsl,init-fd-counters = <0x3333>;
+		};
+
+		spi@f00 {
+			status = "disabled";
+		};
+
+		psc@2000 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		psc@2200 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2200 0x100>;
+			interrupts = <2 2 0>;
+		};
+
+		psc@2400 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2400 0x100>;
+			interrupts = <2 3 0>;
+		};
+
+		psc@2600 {
+			status = "disabled";
+		};
+
+		psc@2800 {
+			status = "disabled";
+		};
+
+		psc@2c00 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2c00 0x100>;
+			interrupts = <2 4 0>;
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@1f {
+				reg = <0x1f>;
+				interrupts = <1 2 0>; /* IRQ 2 active low */
+			};
+		};
+
+		i2c@3d00 {
+			status = "disabled";
+		};
+
+		i2c@3d40 {
+			hwmon@2e {
+				compatible = "nsc,lm87";
+				reg = <0x2e>;
+			};
+			rtc@51 {
+				compatible = "nxp,rtc8564";
+				reg = <0x51>;
+			};
+		};
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200b-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xfe000000 0x02000000
+			  1 0 0x62000000 0x00400000
+			  2 0 0x64000000 0x00200000
+			  3 0 0x66000000 0x01000000
+			  6 0 0x68000000 0x01000000
+			  7 0 0x6a000000 0x00000004>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
+		sram0@1,0 {
+			compatible = "mtd-ram";
+			reg = <1 0x00000 0x00400000>;
+			bank-width = <2>;
+		};
+	};
+
+	pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				 /* IDSEL 0x16 */
+				 0xc000 0 0 1 &mpc5200_pic 1 3 3
+				 0xc000 0 0 2 &mpc5200_pic 1 3 3
+				 0xc000 0 0 3 &mpc5200_pic 1 3 3
+				 0xc000 0 0 4 &mpc5200_pic 1 3 3>;
+		clock-frequency = <0>; /* From boot loader */
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+	};
+};
diff --git a/src/powerpc/ac14xx.dts b/src/powerpc/ac14xx.dts
new file mode 100644
index 000000000000..27fcabc2f857
--- /dev/null
+++ b/src/powerpc/ac14xx.dts
@@ -0,0 +1,399 @@
+/*
+ * Device Tree Source for the MPC5121e based ac14xx board
+ *
+ * Copyright 2012 Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+#include <mpc5121.dtsi>
+
+/ {
+	model = "ac14xx";
+	compatible = "ifm,ac14xx", "fsl,mpc5121";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial7;
+		spi4 = &spi4;
+		spi5 = &spi5;
+	};
+
+	cpus {
+		PowerPC,5121@0 {
+			timebase-frequency = <40000000>;	/*  40 MHz (csb/4) */
+			bus-frequency = <160000000>;		/* 160 MHz csb bus */
+			clock-frequency = <400000000>;		/* 400 MHz ppc core */
+		};
+	};
+
+	memory {
+		reg = <0x00000000 0x10000000>;			/* 256MB at 0 */
+	};
+
+	nfc@40000000 {
+		status = "disabled";
+	};
+
+	localbus@80000020 {
+		ranges = <0x0 0x0 0xfc000000 0x04000000	/* CS0: NOR flash */
+			  0x1 0x0 0xe0000000 0x00010000 /* CS1: FRAM */
+			  0x2 0x0 0xe0100000 0x00080000 /* CS2: asi1 */
+			  0x3 0x0 0xe0300000 0x00020000 /* CS3: comm */
+			  0x5 0x0 0xe0400000 0x00010000 /* CS5: safety */
+			  0x6 0x0 0xe0200000 0x00080000>; /* CS6: asi2 */
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0x00000000 0x04000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <2>;
+			device-width = <2>;
+
+			partition@0 {
+				label = "dtb-kernel-production";
+				reg = <0x00000000 0x00400000>;
+			};
+			partition@1 {
+				label = "filesystem-production";
+				reg = <0x00400000 0x03400000>;
+			};
+
+			partition@2 {
+				label = "recovery";
+				reg = <0x03800000 0x00700000>;
+			};
+
+			partition@3 {
+				label = "uboot-code";
+				reg = <0x03f00000 0x00040000>;
+			};
+			partition@4 {
+				label = "uboot-env1";
+				reg = <0x03f40000 0x00020000>;
+			};
+			partition@5 {
+				label = "uboot-env2";
+				reg = <0x03f60000 0x00020000>;
+			};
+		};
+
+		fram@1,0 {
+			compatible = "ifm,ac14xx-fram", "linux,uio-pdrv-genirq";
+			reg = <1 0x00000000 0x00010000>;
+		};
+
+		asi@2,0 {
+			/* masters mapping: CS, CS offset, size */
+			reg = <2 0x00000000 0x00080000
+			       6 0x00000000 0x00080000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "ifm,ac14xx-asi-fpga";
+			gpios = <
+				&gpio_pic 26 0	/* prog */
+				&gpio_pic 27 0	/* done */
+				&gpio_pic 10 0	/* reset */
+				>;
+
+			master@1 {
+				interrupts = <20 0x2>;
+				interrupt-parent = <&gpio_pic>;
+				chipselect = <2 0x00009000 0x00009100>;
+				label = "AS-i master 1";
+			};
+
+			master@2 {
+				interrupts = <21 0x2>;
+				interrupt-parent = <&gpio_pic>;
+				chipselect = <6 0x00009000 0x00009100>;
+				label = "AS-i master 2";
+			};
+		};
+
+		netx@3,0 {
+			compatible = "ifm,netx";
+			reg = <0x3 0x00000000 0x00020000>;
+			chipselect = <3 0x00101140 0x00203100>;
+			interrupts = <17 0x8>;
+			gpios = <&gpio_pic 15 0>;
+		};
+
+		safety@5,0 {
+			compatible = "ifm,safety";
+			reg = <0x5 0x00000000 0x00010000>;
+			chipselect = <5 0x00009000 0x00009100>;
+			interrupts = <22 0x2>;
+			interrupt-parent = <&gpio_pic>;
+			gpios = <
+				&gpio_pic 12 0	/* prog */
+				&gpio_pic 11 0	/* done */
+				>;
+		};
+	};
+
+	clocks {
+		osc {
+			clock-frequency = <25000000>;
+		};
+	};
+
+	soc@80000000 {
+		bus-frequency = <80000000>;	/* 80 MHz ips bus */
+
+		clock@f00 {
+			compatible = "fsl,mpc5121rev2-clock", "fsl,mpc5121-clock";
+		};
+
+		/*
+		 * GPIO PIC:
+		 * interrupts cell = <pin nr, sense>
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		gpio_pic: gpio@1100 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		sdhc@1500 {
+			cd-gpios = <&gpio_pic 23 0>;	/* card detect */
+			wp-gpios = <&gpio_pic 24 0>;	/* write protect */
+			wp-inverted;			/* WP active high */
+		};
+
+		i2c@1700 {
+			/* use Fast-mode */
+			clock-frequency = <400000>;
+
+			at24@30 {
+				compatible = "at24,24c01";
+				reg = <0x30>;
+			};
+
+			at24@31 {
+				compatible = "at24,24c01";
+				reg = <0x31>;
+			};
+
+			temp@48 {
+				compatible = "ad,ad7414";
+				reg = <0x48>;
+			};
+
+			at24@50 {
+				compatible = "at24,24c01";
+				reg = <0x50>;
+			};
+
+			at24@51 {
+				compatible = "at24,24c01";
+				reg = <0x51>;
+			};
+
+			at24@52 {
+				compatible = "at24,24c01";
+				reg = <0x52>;
+			};
+
+			at24@53 {
+				compatible = "at24,24c01";
+				reg = <0x53>;
+			};
+
+			at24@54 {
+				compatible = "at24,24c01";
+				reg = <0x54>;
+			};
+
+			at24@55 {
+				compatible = "at24,24c01";
+				reg = <0x55>;
+			};
+
+			at24@56 {
+				compatible = "at24,24c01";
+				reg = <0x56>;
+			};
+
+			at24@57 {
+				compatible = "at24,24c01";
+				reg = <0x57>;
+			};
+
+			rtc@68 {
+				compatible = "st,m41t00";
+				reg = <0x68>;
+			};
+		};
+
+		axe_pic: axe-base@2000 {
+			compatible = "fsl,mpc5121-axe-base";
+			reg = <0x2000 0x100>;
+			interrupts = <42 0x8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		axe-app {
+			compatible = "fsl,mpc5121-axe-app";
+			interrupt-parent = <&axe_pic>;
+			interrupts = <
+					/* soft interrupts */
+					0 0x0	1 0x0	2 0x0	3 0x0
+					4 0x0	5 0x0	6 0x0	7 0x0
+					/* fifo interrupts */
+					8 0x0	9 0x0	10 0x0	11 0x0
+				>;
+		};
+
+		display@2100 {
+			edid = [00 FF FF FF FF FF FF 00 14 94 00 00 00 00 00 00
+				0A 12 01 03 80 1C 23 78 CA 88 FF 94 52 54 8E 27
+				1E 4C 50 00 00 00 01 01 01 01 01 01 01 01 01 01
+				01 01 01 01 01 01 FB 00 B0 14 00 DC 05 00 08 04
+				21 00 1C 23 00 00 00 18 00 00 00 FD 00 38 3C 1F
+				3C 01 0A 20 20 20 20 20 20 20 00 00 00 FC 00 45
+				54 30 31 38 30 30 33 44 4D 55 0A 0A 00 00 00 10
+				00 41 30 30 30 30 30 30 30 30 30 30 30 31 00 D5];
+		};
+
+		can@2300 {
+			status = "disabled";
+		};
+
+		can@2380 {
+			status = "disabled";
+		};
+
+		viu@2400 {
+			status = "disabled";
+		};
+
+		mdio@2800 {
+			phy0: ethernet-phy@1f {
+				compatible = "smsc,lan8700";
+				reg = <0x1f>;
+			};
+		};
+
+		enet: ethernet@2800 {
+			phy-handle = <&phy0>;
+		};
+
+		usb@3000 {
+			status = "disabled";
+		};
+
+		usb@4000 {
+			status = "disabled";
+		};
+
+		/* PSC3 serial port A, aka ttyPSC0 */
+		serial0: psc@11300 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			fsl,rx-fifo-size = <512>;
+			fsl,tx-fifo-size = <512>;
+		};
+
+		/* PSC4 in SPI mode */
+		spi4: psc@11400 {
+			compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
+			fsl,rx-fifo-size = <768>;
+			fsl,tx-fifo-size = <768>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <1>;
+			cs-gpios = <&gpio_pic 25 0>;
+
+			flash: m25p128@0 {
+				compatible = "st,m25p128";
+				spi-max-frequency = <20000000>;
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "spi-flash0";
+					reg = <0x00000000 0x01000000>;
+				};
+			};
+		};
+
+		/* PSC5 in SPI mode */
+		spi5: psc@11500 {
+			compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
+			fsl,mode = "spi-master";
+			fsl,rx-fifo-size = <128>;
+			fsl,tx-fifo-size = <128>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lcd@0 {
+				compatible = "ilitek,ili922x";
+				reg = <0>;
+				spi-max-frequency = <100000>;
+				spi-cpol;
+				spi-cpha;
+			};
+		};
+
+		/* PSC7 serial port C, aka ttyPSC2 */
+		serial7: psc@11700 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			fsl,rx-fifo-size = <512>;
+			fsl,tx-fifo-size = <512>;
+		};
+
+		matrix_keypad@0 {
+			compatible = "gpio-matrix-keypad";
+			debounce-delay-ms = <5>;
+			col-scan-delay-us = <1>;
+			gpio-activelow;
+			col-gpios-binary;
+			col-switch-delay-ms = <200>;
+
+			col-gpios = <&gpio_pic 1 0>;	/* pin1 */
+
+			row-gpios = <&gpio_pic 2 0	/* pin2 */
+				     &gpio_pic 3 0	/* pin3 */
+				     &gpio_pic 4 0>;	/* pin4 */
+
+			linux,keymap = <0x0000006e	/* FN LEFT */
+					0x01000067	/* UP */
+					0x02000066	/* FN RIGHT */
+					0x00010069	/* LEFT */
+					0x0101006a	/* DOWN */
+					0x0201006c>;	/* RIGHT */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		backlight {
+			label = "backlight";
+			gpios = <&gpio_pic 0 0>;
+			default-state = "keep";
+		};
+		green {
+			label = "green";
+			gpios = <&gpio_pic 18 0>;
+			default-state = "keep";
+		};
+		red {
+			label = "red";
+			gpios = <&gpio_pic 19 0>;
+			default-state = "keep";
+		};
+	};
+};
diff --git a/src/powerpc/acadia.dts b/src/powerpc/acadia.dts
new file mode 100644
index 000000000000..57291f61ffe7
--- /dev/null
+++ b/src/powerpc/acadia.dts
@@ -0,0 +1,224 @@
+/*
+ * Device Tree Source for AMCC Acadia (405EZ)
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "amcc,acadia";
+	compatible = "amcc,acadia";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,405EZ";
+			reg = <0x0>;
+			clock-frequency = <0>; /* Filled in by wrapper */
+			timebase-frequency = <0>; /* Filled in by wrapper */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>;
+			d-cache-size = <16384>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>; /* Filled in by wrapper */
+	};
+
+	UIC0: interrupt-controller {
+		compatible = "ibm,uic-405ez", "ibm,uic";
+		interrupt-controller;
+		dcr-reg = <0x0c0 0x009>;
+		cell-index = <0>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	plb {
+		compatible = "ibm,plb-405ez", "ibm,plb3";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by wrapper */
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-405ez", "ibm,mcmal";
+			dcr-reg = <0x380 0x62>;
+			num-tx-chans = <1>;
+			num-rx-chans = <1>;
+			interrupt-parent = <&UIC0>;
+			/* 405EZ has only 3 interrupts to the UIC, as
+			 * SERR, TXDE, and RXDE are or'd together into
+			 * one UIC bit
+			 */
+			interrupts = <
+				0x13 0x4 /* TXEOB */
+				0x15 0x4 /* RXEOB */
+				0x12 0x4 /* SERR, TXDE, RXDE */>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-405ez", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			dcr-reg = <0x0a 0x05>;
+			clock-frequency = <0>; /* Filled in by wrapper */
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x8>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by wrapper */
+				current-speed = <115200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x5 0x4>;
+			};
+
+			UART1: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600400 0x8>;
+				clock-frequency = <0>; /* Filled in by wrapper */
+				current-speed = <115200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x6 0x4>;
+			};
+
+			IIC: i2c@ef600500 {
+				compatible = "ibm,iic-405ez", "ibm,iic";
+				reg = <0xef600500 0x11>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0xa 0x4>;
+			};
+
+			GPIO0: gpio@ef600700 {
+				compatible = "ibm,gpio-405ez";
+				reg = <0xef600700 0x20>;
+			};
+
+			GPIO1: gpio@ef600800 {
+				compatible = "ibm,gpio-405ez";
+				reg = <0xef600800 0x20>;
+			};
+
+			EMAC0: ethernet@ef600900 {
+				device_type = "network";
+				compatible = "ibm,emac-405ez", "ibm,emac";
+				interrupt-parent = <&UIC0>;
+				interrupts = <
+					0x10 0x4 /* Ethernet */
+					0x11 0x4 /* Ethernet Wake up */>;
+				local-mac-address = [000000000000]; /* Filled in by wrapper */
+				reg = <0xef600900 0x70>;
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "mii";
+				phy-map = <0x0>;
+			};
+
+			CAN0: can@ef601000 {
+				compatible = "amcc,can-405ez";
+				reg = <0xef601000 0x620>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x7 0x4>;
+			};
+
+			CAN1: can@ef601800 {
+				compatible = "amcc,can-405ez";
+				reg = <0xef601800 0x620>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x8 0x4>;
+			};
+
+			cameleon@ef602000 {
+				compatible = "amcc,cameleon-405ez";
+				reg = <0xef602000 0x800>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0xb 0x4 0xc 0x4>;
+			};
+
+			ieee1588@ef602800 {
+				compatible = "amcc,ieee1588-405ez";
+				reg = <0xef602800 0x60>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x4 0x4>;
+				/* This thing is a bit weird.  It has it's own UIC
+				 * that it uses to generate snapshot triggers.  We
+				 * don't really support this device yet, and it needs
+				 * work to figure this out.
+				 */
+				dcr-reg = <0xe0 0x9>;
+			};
+
+			usb@ef603000 {
+				compatible = "ohci-be";
+				reg = <0xef603000 0x80>;
+				interrupts-parent = <&UIC0>;
+				interrupts = <0xd 0x4 0xe 0x4>;
+			};
+
+			dac@ef603300 {
+				compatible = "amcc,dac-405ez";
+				reg = <0xef603300 0x40>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x18 0x4>;
+			};
+
+			adc@ef603400 {
+				compatible = "amcc,adc-405ez";
+				reg = <0xef603400 0x40>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x17 0x4>;
+			};
+
+			spi@ef603500 {
+				compatible = "amcc,spi-405ez";
+				reg = <0xef603500 0x100>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x9 0x4>;
+			};
+		};
+
+		EBC0: ebc {
+			compatible = "ibm,ebc-405ez", "ibm,ebc";
+			dcr-reg = <0x12 0x2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			clock-frequency = <0>; /* Filled in by wrapper */
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600300";
+	};
+};
diff --git a/src/powerpc/adder875-redboot.dts b/src/powerpc/adder875-redboot.dts
new file mode 100644
index 000000000000..083984720b2f
--- /dev/null
+++ b/src/powerpc/adder875-redboot.dts
@@ -0,0 +1,183 @@
+/*
+ * Device Tree Source for MPC885 ADS running RedBoot
+ *
+ * Copyright 2006 MontaVista Software, Inc.
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "Analogue & Micro Adder MPC875";
+	compatible = "analogue-and-micro,adder875";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		console = &console;
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,875@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <16>;
+			i-cache-line-size = <16>;
+			d-cache-size = <8192>;
+			i-cache-size = <8192>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			interrupts = <15 2>;	// decrementer interrupt
+			interrupt-parent = <&PIC>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x01000000>;
+	};
+
+	localbus@fa200100 {
+		compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus",
+		             "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xfa200100 0x40>;
+
+		ranges = <
+			0 0 0xfe000000 0x00800000
+			2 0 0xfa100000 0x00008000
+		>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x800000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+	};
+
+	soc@fa200000 {
+		compatible = "fsl,mpc875-immr", "fsl,pq1-soc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xfa200000 0x00004000>;
+
+		// Temporary until code stops depending on it.
+		device_type = "soc";
+
+		// Temporary until get_immrbase() is fixed.
+		reg = <0xfa200000 0x4000>;
+
+		mdio@e00 {
+			compatible = "fsl,mpc875-fec-mdio", "fsl,pq1-fec-mdio";
+			reg = <0xe00 0x188>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			PHY0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			PHY1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		eth0: ethernet@e00 {
+			device_type = "network";
+			compatible = "fsl,mpc875-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <0xe00 0x188>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <3 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY0>;
+			linux,network-index = <0>;
+		};
+
+		eth1: ethernet@1e00 {
+			device_type = "network";
+			compatible = "fsl,mpc875-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <0x1e00 0x188>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <7 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY1>;
+			linux,network-index = <1>;
+		};
+
+		PIC: interrupt-controller@0 {
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0 0x24>;
+			compatible = "fsl,mpc875-pic", "fsl,pq1-pic";
+		};
+
+		cpm@9c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc875-cpm", "fsl,cpm1", "simple-bus";
+			interrupts = <0>;	// cpm error interrupt
+			interrupt-parent = <&CPM_PIC>;
+			reg = <0x9c0 0x40>;
+			ranges;
+
+			muram {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x2000 0x2000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0 0x1c00>;
+				};
+			};
+
+			brg@9f0 {
+				compatible = "fsl,mpc875-brg",
+				             "fsl,cpm1-brg",
+				             "fsl,cpm-brg";
+				clock-frequency = <50000000>;
+				reg = <0x9f0 0x10>;
+			};
+
+			CPM_PIC: interrupt-controller@930 {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupts = <5 2 0 2>;
+				interrupt-parent = <&PIC>;
+				reg = <0x930 0x20>;
+				compatible = "fsl,mpc875-cpm-pic",
+				             "fsl,cpm1-pic";
+			};
+
+			console: serial@a80 {
+				device_type = "serial";
+				compatible = "fsl,mpc875-smc-uart",
+				             "fsl,cpm1-smc-uart";
+				reg = <0xa80 0x10 0x3e80 0x40>;
+				interrupts = <4>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x0090>;
+				current-speed = <115200>;
+			};
+		};
+	};
+
+	chosen {
+		linux,stdout-path = &console;
+	};
+};
diff --git a/src/powerpc/adder875-uboot.dts b/src/powerpc/adder875-uboot.dts
new file mode 100644
index 000000000000..e4554caf8f8d
--- /dev/null
+++ b/src/powerpc/adder875-uboot.dts
@@ -0,0 +1,182 @@
+/*
+ * Device Tree Source for MPC885 ADS running U-Boot
+ *
+ * Copyright 2006 MontaVista Software, Inc.
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "Analogue & Micro Adder MPC875";
+	compatible = "analogue-and-micro,adder875";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		console = &console;
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,875@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <16>;
+			i-cache-line-size = <16>;
+			d-cache-size = <8192>;
+			i-cache-size = <8192>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			interrupts = <15 2>;	// decrementer interrupt
+			interrupt-parent = <&PIC>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x01000000>;
+	};
+
+	localbus@ff000100 {
+		compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus",
+		             "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xff000100 0x40>;
+
+		ranges = <
+			0 0 0xfe000000 0x01000000
+		>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x800000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+	};
+
+	soc@ff000000 {
+		compatible = "fsl,mpc875-immr", "fsl,pq1-soc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff000000 0x00004000>;
+
+		// Temporary until code stops depending on it.
+		device_type = "soc";
+
+		// Temporary until get_immrbase() is fixed.
+		reg = <0xff000000 0x4000>;
+
+		mdio@e00 {
+			compatible = "fsl,mpc875-fec-mdio", "fsl,pq1-fec-mdio";
+			reg = <0xe00 0x188>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			PHY0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			PHY1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		eth0: ethernet@e00 {
+			device_type = "network";
+			compatible = "fsl,mpc875-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <0xe00 0x188>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <3 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY0>;
+			linux,network-index = <0>;
+		};
+
+		eth1: ethernet@1e00 {
+			device_type = "network";
+			compatible = "fsl,mpc875-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <0x1e00 0x188>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <7 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY1>;
+			linux,network-index = <1>;
+		};
+
+		PIC: interrupt-controller@0 {
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0 0x24>;
+			compatible = "fsl,mpc875-pic", "fsl,pq1-pic";
+		};
+
+		cpm@9c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc875-cpm", "fsl,cpm1", "simple-bus";
+			interrupts = <0>;	// cpm error interrupt
+			interrupt-parent = <&CPM_PIC>;
+			reg = <0x9c0 0x40>;
+			ranges;
+
+			muram {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x2000 0x2000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0 0x1c00>;
+				};
+			};
+
+			brg@9f0 {
+				compatible = "fsl,mpc875-brg",
+				             "fsl,cpm1-brg",
+				             "fsl,cpm-brg";
+				clock-frequency = <50000000>;
+				reg = <0x9f0 0x10>;
+			};
+
+			CPM_PIC: interrupt-controller@930 {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupts = <5 2 0 2>;
+				interrupt-parent = <&PIC>;
+				reg = <0x930 0x20>;
+				compatible = "fsl,mpc875-cpm-pic",
+				             "fsl,cpm1-pic";
+			};
+
+			console: serial@a80 {
+				device_type = "serial";
+				compatible = "fsl,mpc875-smc-uart",
+				             "fsl,cpm1-smc-uart";
+				reg = <0xa80 0x10 0x3e80 0x40>;
+				interrupts = <4>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x0090>;
+				current-speed = <115200>;
+			};
+		};
+	};
+
+	chosen {
+		linux,stdout-path = &console;
+	};
+};
diff --git a/src/powerpc/akebono.dts b/src/powerpc/akebono.dts
new file mode 100644
index 000000000000..e61d5dc598c1
--- /dev/null
+++ b/src/powerpc/akebono.dts
@@ -0,0 +1,415 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright © 2013 Tony Breeds IBM Corporation
+ * Copyright © 2013 Alistair Popple IBM Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x01f00000 0x00100000;	// spin table
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "ibm,akebono";
+	compatible = "ibm,akebono", "ibm,476gtr";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,476";
+			reg = <0>;
+			clock-frequency = <1600000000>; // 1.6 GHz
+			timebase-frequency = <100000000>; // 100Mhz
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "ok";
+		};
+		cpu@1 {
+			device_type = "cpu";
+			model = "PowerPC,476";
+			reg = <1>;
+			clock-frequency = <1600000000>; // 1.6 GHz
+			timebase-frequency = <100000000>; // 100Mhz
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "disabled";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x01f00000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>; // filled in by zImage
+	};
+
+	MPIC: interrupt-controller {
+		compatible = "chrp,open-pic";
+		interrupt-controller;
+		dcr-reg = <0xffc00000 0x00040000>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		single-cpu-affinity;
+	};
+
+	plb {
+		compatible = "ibm,plb6";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		clock-frequency = <200000000>; // 200Mhz
+
+		HSTA0: hsta@310000e0000 {
+			compatible = "ibm,476gtr-hsta-msi", "ibm,hsta-msi";
+			reg = <0x310 0x000e0000 0x0 0xf0>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <108 0
+				      109 0
+				      110 0
+				      111 0
+				      112 0
+				      113 0
+				      114 0
+				      115 0
+				      116 0
+				      117 0
+				      118 0
+				      119 0
+				      120 0
+				      121 0
+				      122 0
+				      123 0>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-476gtr", "ibm,mcmal2";
+			dcr-reg = <0xc0000000 0x062>;
+			num-tx-chans = <1>;
+			num-rx-chans = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <	/*TXEOB*/ 77 0x4
+					/*RXEOB*/ 78 0x4
+					/*SERR*/  76 0x4
+					/*TXDE*/  79 0x4
+					/*RXDE*/  80 0x4>;
+		};
+
+		SATA0: sata@30000010000 {
+			compatible = "ibm,476gtr-ahci";
+			reg = <0x300 0x00010000 0x0 0x10000>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <93 2>;
+		};
+
+		EHCI0: ehci@30010000000 {
+			compatible = "ibm,476gtr-ehci", "generic-ehci";
+			reg = <0x300 0x10000000 0x0 0x10000>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <85 2>;
+		};
+
+		SD0: sd@30000000000 {
+			compatible = "ibm,476gtr-sdhci", "generic-sdhci";
+			reg = <0x300 0x00000000 0x0 0x10000>;
+			interrupts = <91 2>;
+			interrupt-parent = <&MPIC>;
+		};
+
+		OHCI0: ohci@30010010000 {
+			compatible = "ibm,476gtr-ohci", "generic-ohci";
+			reg = <0x300 0x10010000 0x0 0x10000>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <89 1>;
+			};
+
+		OHCI1: ohci@30010020000 {
+			compatible = "ibm,476gtr-ohci", "generic-ohci";
+			reg = <0x300 0x10020000 0x0 0x10000>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <88 1>;
+			};
+
+		POB0: opb {
+			compatible = "ibm,opb-4xx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Wish there was a nicer way of specifying a full
+			 * 32-bit range
+			 */
+			ranges = <0x00000000 0x0000033f 0x00000000 0x80000000
+				  0x80000000 0x0000033f 0x80000000 0x80000000>;
+			clock-frequency = <100000000>;
+
+			RGMII0: emac-rgmii-wol@50004 {
+				compatible = "ibm,rgmii-wol-476gtr", "ibm,rgmii-wol";
+				reg = <0x50004 0x00000008>;
+				has-mdio;
+			};
+
+			EMAC0: ethernet@30000 {
+				device_type = "network";
+				compatible = "ibm,emac-476gtr", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &MPIC 81 0x4
+						 /*Wake*/   0x1 &MPIC 82 0x4>;
+				reg = <0x30000 0x78>;
+
+				/* local-mac-address will normally be added by
+				 * the wrapper. If your device doesn't support
+				 * passing data to the wrapper (in the form
+				 * local-mac-addr=<hwaddr>) then you will need
+				 * to set it manually here. */
+				//local-mac-address = [000000000000];
+
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-wol-device = <&RGMII0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			UART0: serial@10000 {
+				device_type = "serial";
+				compatible = "ns16750", "ns16550";
+				reg = <0x10000 0x00000008>;
+				virtual-reg = <0xe8010000>;
+				clock-frequency = <1851851>;
+				current-speed = <38400>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <39 2>;
+			};
+
+			IIC0: i2c@00000000 {
+				compatible = "ibm,iic-476gtr", "ibm,iic";
+				reg = <0x0 0x00000020>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <37 2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rtc@68 {
+					compatible = "st,m41t80", "m41st85";
+					reg = <0x68>;
+				};
+			};
+
+			IIC1: i2c@00000100 {
+				compatible = "ibm,iic-476gtr", "ibm,iic";
+				reg = <0x100 0x00000020>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <38 2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				avr@58 {
+					compatible = "ibm,akebono-avr";
+					reg = <0x58>;
+				};
+			};
+
+			FPGA0: fpga@ebc00000 {
+				compatible = "ibm,akebono-fpga";
+				reg = <0xebc00000 0x8>;
+			};
+		};
+
+		PCIE0: pciex@10100000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x00000101 0x00000000 0x0 0x10000000	       /* Config space access */
+			       0x00000100 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0xc0 0x20>;
+
+//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x00000140 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+			 * PCI devices must be able to write to the HSTA module.
+			 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 45 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 46 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 47 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 48 0x2 /* int D */>;
+		};
+
+		PCIE1: pciex@20100000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x00000201 0x00000000 0x0 0x10000000	       /* Config space access */
+			       0x00000200 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0x100 0x20>;
+
+//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000210 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x00000240 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+			 * PCI devices must be able to write to the HSTA module.
+			 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 53 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 54 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 55 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 56 0x2 /* int D */>;
+		};
+
+		PCIE2: pciex@18100000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x2>; /* port number */
+			reg = <0x00000181 0x00000000 0x0 0x10000000	       /* Config space access */
+			       0x00000180 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0xe0 0x20>;
+
+//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000190 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x000001c0 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+			 * PCI devices must be able to write to the HSTA module.
+			 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 61 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 62 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 63 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 64 0x2 /* int D */>;
+		};
+
+		PCIE3: pciex@28100000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x3>; /* port number */
+			reg = <0x00000281 0x00000000 0x0 0x10000000	       /* Config space access */
+			       0x00000280 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0x120 0x20>;
+
+//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000290 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x000002c0 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+			 * PCI devices must be able to write to the HSTA module.
+			 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 69 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 70 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 71 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 72 0x2 /* int D */>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = &UART0;
+	};
+};
diff --git a/src/powerpc/amigaone.dts b/src/powerpc/amigaone.dts
new file mode 100644
index 000000000000..49ac36b16dd7
--- /dev/null
+++ b/src/powerpc/amigaone.dts
@@ -0,0 +1,173 @@
+/*
+ * AmigaOne Device Tree Source
+ *
+ * Copyright 2008 Gerhard Pircher (gerhard_pircher@gmx.net)
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "AmigaOne";
+	compatible = "eyetech,amigaone";
+	coherency-off;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <32768>;		// L1, 32K
+			i-cache-size = <32768>;		// L1, 32K
+			timebase-frequency = <0>;	// 33.3 MHz, from U-boot
+			clock-frequency = <0>;		// From U-boot
+			bus-frequency = <0>;		// From U-boot
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0>;				// From U-boot
+	};
+
+	pci@80000000 {
+		device_type = "pci";
+		compatible = "mai-logic,articia-s";
+		bus-frequency = <33333333>;
+		bus-range = <0 0xff>;
+		ranges = <0x01000000 0 0x00000000 0xfe000000 0 0x00c00000	// PCI I/O
+		          0x02000000 0 0x80000000 0x80000000 0 0x7d000000	// PCI memory
+		          0x02000000 0 0x00000000 0xfd000000 0 0x01000000>;	// PCI alias memory (ISA)
+		// Configuration address and data register.
+		reg = <0xfec00cf8 4
+		       0xfee00cfc 4>;
+		8259-interrupt-acknowledge = <0xfef00000>;
+		// Do not define a interrupt-parent here, if there is no
+		// interrupt-map property.
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		isa@7 {
+			device_type = "isa";
+			compatible = "pciclass,0601";
+			vendor-id = <0x00001106>;
+			device-id = <0x00000686>;
+			revision-id = <0x00000010>;
+			class-code = <0x00060100>;
+			subsystem-id = <0>;
+			subsystem-vendor-id = <0>;
+			devsel-speed = <0x00000001>;
+			min-grant = <0>;
+			max-latency = <0>;
+			/* First 4k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
+			ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>;
+			interrupt-parent = <&i8259>;
+			#interrupt-cells = <2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+
+			dma-controller@0 {
+				compatible = "pnpPNP,200";
+				reg = <1 0x00000000 0x00000020
+				       1 0x00000080 0x00000010
+				       1 0x000000c0 0x00000020>;
+			};
+
+			i8259: interrupt-controller@20 {
+				device_type = "interrupt-controller";
+				compatible = "pnpPNP,000";
+				interrupt-controller;
+				reg = <1 0x00000020 0x00000002
+				       1 0x000000a0 0x00000002
+				       1 0x000004d0 0x00000002>;
+				reserved-interrupts = <2>;
+				#interrupt-cells = <2>;
+			};
+
+			timer@40 {
+				// Also adds pcspkr to platform devices.
+				compatible = "pnpPNP,100";
+				reg = <1 0x00000040 0x00000020>;
+			};
+
+			8042@60 {
+				device_type = "8042";
+				reg = <1 0x00000060 0x00000001
+				       1 0x00000064 0x00000001>;
+				interrupts = <1 3 12 3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				keyboard@0 {
+					compatible = "pnpPNP,303";
+					reg = <0>;
+				};
+
+				mouse@1 {
+					compatible = "pnpPNP,f03";
+					reg = <1>;
+				};
+			};
+
+			rtc@70 {
+				compatible = "pnpPNP,b00";
+				reg = <1 0x00000070 0x00000002>;
+				interrupts = <8 3>;
+			};
+
+			serial@3f8 {
+				device_type = "serial";
+				compatible = "pnpPNP,501","pnpPNP,500";
+				reg = <1 0x000003f8 0x00000008>;
+				interrupts = <4 3>;
+				clock-frequency = <1843200>;
+				current-speed = <115200>;
+			};
+
+			serial@2f8 {
+				device_type = "serial";
+				compatible = "pnpPNP,501","pnpPNP,500";
+				reg = <1 0x000002f8 0x00000008>;
+				interrupts = <3 3>;
+				clock-frequency = <1843200>;
+				current-speed = <115200>;
+			};
+
+			parallel@378 {
+				device_type = "parallel";
+				// No ECP support for now, otherwise add "pnpPNP,401".
+				compatible = "pnpPNP,400";
+				reg = <1 0x00000378 0x00000003
+				       1 0x00000778 0x00000003>;
+			};
+
+			fdc@3f0 {
+				device_type = "fdc";
+				compatible = "pnpPNP,700";
+				reg = <1 0x000003f0 0x00000008>;
+				interrupts = <6 3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				disk@0 {
+					reg = <0>;
+				};
+			};
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/pci@80000000/isa@7/serial@3f8";
+	};
+};
diff --git a/src/powerpc/arches.dts b/src/powerpc/arches.dts
new file mode 100644
index 000000000000..30f41204acfa
--- /dev/null
+++ b/src/powerpc/arches.dts
@@ -0,0 +1,355 @@
+/*
+ * Device Tree Source for AMCC Arches (dual 460GT board)
+ *
+ * (C) Copyright 2008 Applied Micro Circuits Corporation
+ * Victor Gallardo <vgallardo@amcc.com>
+ * Adam Graham <agraham@amcc.com>
+ *
+ * Based on the glacier.dts file
+ *   Stefan Roese <sr@denx.de>
+ *   Copyright 2008 DENX Software Engineering
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,arches";
+	compatible = "amcc,arches";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		ethernet2 = &EMAC2;
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,460GT";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			next-level-cache = <&L2C0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-460gt";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-460gt";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-460gt", "ibm,l2-cache";
+		dcr-reg = <0x020 0x008		/* Internal SRAM DCR's */
+			   0x030 0x008>;	/* L2 cache DCR's */
+		cache-line-size = <32>;		/* 32 bytes */
+		cache-size = <262144>;		/* L2, 256K */
+		interrupt-parent = <&UIC1>;
+		interrupts = <11 1>;
+	};
+
+	plb {
+		compatible = "ibm,plb-460gt", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		CRYPTO: crypto@180000 {
+			compatible = "amcc,ppc460gt-crypto", "amcc,ppc4xx-crypto";
+			reg = <4 0x00180000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x1d 0x4>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <3>;
+			num-rx-chans = <24>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x3 0x4
+					/*TXDE*/  0x4 0x4
+					/*RXDE*/  0x5 0x4>;
+			desc-base-addr-high = <0x8>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-460gt", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-460gt", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x6 0x4>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl256n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x02000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "root";
+						reg = <0x00200000 0x00200000>;
+					};
+					partition@400000 {
+						label = "user";
+						reg = <0x00400000 0x01b60000>;
+					};
+					partition@1f60000 {
+						label = "env";
+						reg = <0x01f60000 0x00040000>;
+					};
+					partition@1fa0000 {
+						label = "u-boot";
+						reg = <0x01fa0000 0x00060000>;
+					};
+				};
+			};
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-460gt", "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				sttm@4a {
+					compatible = "ad,ad7414";
+					reg = <0x4a>;
+					interrupt-parent = <&UIC1>;
+					interrupts = <0x0 0x8>;
+				};
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-460gt", "ibm,iic";
+				reg = <0xef600800 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+			};
+
+			TAH0: emac-tah@ef601350 {
+				compatible = "ibm,tah-460gt", "ibm,tah";
+				reg = <0xef601350 0x00000030>;
+			};
+
+			TAH1: emac-tah@ef601450 {
+				compatible = "ibm,tah-460gt", "ibm,tah";
+				reg = <0xef601450 0x00000030>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
+				reg = <0xef600e00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "sgmii";
+				phy-map = <0xffffffff>;
+				gpcs-address = <0x0000000a>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
+				reg = <0xef600f00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <8>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "sgmii";
+				phy-map = <0x00000000>;
+				gpcs-address = <0x0000000b>;
+				tah-device = <&TAH1>;
+				tah-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+
+			EMAC2: ethernet@ef601100 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC2>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
+						 /*Wake*/   0x1 &UIC2 0x16 0x4>;
+				reg = <0xef601100 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2>;
+				mal-rx-channel = <16>;
+				cell-index = <2>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>; /* emac2&3 only */
+				phy-mode = "sgmii";
+				phy-map = <0x00000001>;
+				gpcs-address = <0x0000000C>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+		};
+	};
+};
diff --git a/src/powerpc/asp834x-redboot.dts b/src/powerpc/asp834x-redboot.dts
new file mode 100644
index 000000000000..9198745f45fb
--- /dev/null
+++ b/src/powerpc/asp834x-redboot.dts
@@ -0,0 +1,310 @@
+/*
+ * Analogue & Micro ASP8347 Device Tree Source
+ *
+ * Copyright 2008 Codehermit
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "Analogue & Micro ASP8347E";
+	compatible = "analogue-and-micro,asp8347e";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8347@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;	// 128MB at 0
+	};
+
+	localbus@ff005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8347e-localbus",
+			     "fsl,pq2pro-localbus",
+			     "simple-bus";
+		reg = <0xff005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		ranges = <
+			0 0 0xf0000000 0x02000000
+		>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+	};
+
+	soc8349@ff000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xff000000 0x00100000>;
+		reg = <0xff000000 0x00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8347-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		/* phy type (ULPI or SERIAL) are only types supported for MPH */
+		/* port = 0 or 1 */
+		usb@22000 {
+			compatible = "fsl-usb2-mph";
+			reg = <0x22000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <39 0x8>;
+			phy_type = "ulpi";
+			port0;
+		};
+		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			dr_mode = "otg";
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 08 e5 11 32 33 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			linux,network-index = <0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@0 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x1>;
+				};
+
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&ipic>;
+					interrupts = <18 0x8>;
+					reg = <0x2>;
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 08 e5 11 32 34 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			linux,network-index = <1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <400000000>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <400000000>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		/* May need to remove if on a part without crypto engine */
+		crypto@30000 {
+			device_type = "crypto";
+			model = "SEC2";
+			compatible = "talitos";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			num-channels = <4>;
+			channel-fifo-len = <24>;
+			exec-units-mask = <0x0000007e>;
+			/* desc mask is for rev2.0,
+			 * we need runtime fixup for >2.0 */
+			descriptor-types-mask = <0x01010ebf>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: pic@700 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,38400 root=/dev/mtdblock3 rootfstype=jffs2";
+		linux,stdout-path = &serial0;
+	};
+
+};
diff --git a/src/powerpc/bamboo.dts b/src/powerpc/bamboo.dts
new file mode 100644
index 000000000000..aa68911f6560
--- /dev/null
+++ b/src/powerpc/bamboo.dts
@@ -0,0 +1,300 @@
+/*
+ * Device Tree Source for AMCC Bamboo
+ *
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * FIXME: Draft only!
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,bamboo";
+	compatible = "amcc,bamboo";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+		serial3 = &UART3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440EP";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440ep";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440ep";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		DMA0: dma {
+			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
+			dcr-reg = <0x100 0x027>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+		};
+
+		POB0: opb {
+		  	compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Bamboo is oddball in the 44x world and doesn't use the ERPN
+			 * bits.
+			 */
+		  	ranges = <0x00000000 0x00000000 0x00000000 0x80000000
+			          0x80000000 0x00000000 0x80000000 0x80000000>;
+		  	interrupt-parent = <&UIC1>;
+		  	interrupts = <0x7 0x4>;
+		  	clock-frequency = <0>; /* Filled in by zImage */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				interrupts = <0x5 0x1>;
+				interrupt-parent = <&UIC1>;
+			};
+
+			UART0: serial@ef600300 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600300 0x00000008>;
+		   		virtual-reg = <0xef600300>;
+		   		clock-frequency = <0>; /* Filled in by zImage */
+		   		current-speed = <115200>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0x0 0x4>;
+	   		};
+
+			UART1: serial@ef600400 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600400 0x00000008>;
+		   		virtual-reg = <0xef600400>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0x1 0x4>;
+	   		};
+
+			UART2: serial@ef600500 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600500 0x00000008>;
+		   		virtual-reg = <0xef600500>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0x3 0x4>;
+	   		};
+
+			UART3: serial@ef600600 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600600 0x00000008>;
+		   		virtual-reg = <0xef600600>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0x4 0x4>;
+	   		};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xef600800 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x7 0x4>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
+				reg = <0xef600d00 0x0000000c>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xef600e00 0x00000070>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0 1>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rmii";
+				phy-map = <0x00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <0>;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0xef600f00 0x00000070>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2 3>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rmii";
+				phy-map = <0x00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <1>;
+			};
+
+			usb@ef601000 {
+				compatible = "ohci-be";
+				reg = <0xef601000 0x00000080>;
+				interrupts = <0x8 0x1 0x9 0x1>;
+				interrupt-parent = < &UIC1 >;
+			};
+		};
+
+		PCI0: pci@ec000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
+			primary;
+			reg = <0x00000000 0xeec00000 0x00000008	/* Config space access */
+			       0x00000000 0xeed00000 0x00000004	/* IACK */
+			       0x00000000 0xeed00000 0x00000004	/* Special cycle */
+			       0x00000000 0xef400000 0x00000040>;	/* Internal registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed. Chip supports a second
+			 * IO range but we don't use it for now
+			 */
+			ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x40000000
+				  0x02000000 0x00000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* Bamboo has all 4 IRQ pins tied together per slot */
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
+			interrupt-map = <
+				/* IDSEL 1 */
+				0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
+
+				/* IDSEL 2 */
+				0x1000 0x0 0x0 0x0 &UIC0 0x1b 0x8
+
+				/* IDSEL 3 */
+				0x1800 0x0 0x0 0x0 &UIC0 0x1a 0x8
+
+				/* IDSEL 4 */
+				0x2000 0x0 0x0 0x0 &UIC0 0x19 0x8
+			>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600300";
+	};
+};
diff --git a/src/powerpc/bluestone.dts b/src/powerpc/bluestone.dts
new file mode 100644
index 000000000000..b0b26d8d68a2
--- /dev/null
+++ b/src/powerpc/bluestone.dts
@@ -0,0 +1,410 @@
+/*
+ * Device Tree for Bluestone (APM821xx) board.
+ *
+ * Copyright (c) 2010, Applied Micro Circuits Corporation
+ * Author: Tirumala R Marri <tmarri@apm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "apm,bluestone";
+	compatible = "apm,bluestone";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,apm821xx";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			next-level-cache = <&L2C0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	OCM: ocm@400040000 {
+		compatible = "ibm,ocm";
+		status = "ok";
+		cell-index = <1>;
+		/* configured in U-Boot */
+		reg = <4 0x00040000 0x8000>; /* 32K */
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-apm821xx";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-apm821xx";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-apm82181", "ibm,l2-cache";
+		dcr-reg = <0x020 0x008
+			   0x030 0x008>;
+		cache-line-size = <32>;
+		cache-size = <262144>;
+		interrupt-parent = <&UIC1>;
+		interrupts = <11 1>;
+	};
+
+	plb {
+		compatible = "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-apm821xx";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal2";
+			descriptor-memory = "ocm";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <1>;
+			num-rx-chans = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x3 0x4
+					/*TXDE*/  0x4 0x4
+					/*RXDE*/  0x5 0x4>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				ranges = < 0x00000003 0x00000000 0xe0000000 0x8000000>;
+				interrupts = <0x6 0x4>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl512n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x00400000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x00180000>;
+					};
+					partition@180000 {
+						label = "env";
+						reg = <0x00180000 0x00020000>;
+					};
+					partition@1a0000 {
+						label = "u-boot";
+						reg = <0x001a0000 0x00060000>;
+					};
+				};
+
+				ndfc@1,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000003 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					/* 2Gb Nand Flash */
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "firmware";
+							reg   = <0x00000000 0x00C00000>;
+						};
+						partition@c00000 {
+							label = "environment";
+							reg   = <0x00C00000 0x00B00000>;
+						};
+						partition@1700000 {
+							label = "kernel";
+							reg   = <0x01700000 0x00E00000>;
+						};
+						partition@2500000 {
+							label = "root";
+							reg   = <0x02500000 0x08200000>;
+						};
+						partition@a700000 {
+							label = "device-tree";
+							reg   = <0x0A700000 0x00B00000>;
+						};
+						partition@b200000 {
+							label = "config";
+							reg   = <0x0B200000 0x00D00000>;
+						};
+						partition@bf00000 {
+							label = "diag";
+							reg   = <0x0BF00000 0x00C00000>;
+						};
+						partition@cb00000 {
+							label = "vendor";
+							reg   = <0x0CB00000 0x3500000>;
+						};
+					};
+				};
+			};
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1 0x4>;
+			};
+
+			UART1: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rtc@68 {
+					compatible = "st,m41t80";
+					reg = <0x68>;
+					interrupt-parent = <&UIC0>;
+					interrupts = <0x9 0x8>;
+				};
+				sttm@4C {
+					compatible = "adm,adm1032";
+					reg = <0x4C>;
+					interrupt-parent = <&UIC1>;
+					interrupts = <0x1E 0x8>; /* CPU_THERNAL_L */
+				};
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic";
+				reg = <0xef600800 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+			};
+
+			RGMII0: emac-rgmii@ef601500 {
+				compatible = "ibm,rgmii";
+				reg = <0xef601500 0x00000008>;
+				has-mdio;
+			};
+
+			TAH0: emac-tah@ef601350 {
+				compatible = "ibm,tah";
+				reg = <0xef601350 0x00000030>;
+			};
+
+			EMAC0: ethernet@ef600c00 {
+				device_type = "network";
+				compatible = "ibm,emac-apm821xx", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
+				reg = <0xef600c00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <16384>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+		};
+
+		PCIE0: pciex@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-apm821xx", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08010000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 40 to 0x7f */
+			bus-range = <0x40 0x7f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
+		};
+
+		MSI: ppc4xx-msi@C10000000 {
+			compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
+			reg = < 0xC 0x10000000 0x100
+				0xC 0x10000000 0x100>;
+			sdr-base = <0x36C>;
+			msi-data = <0x00004440>;
+			msi-mask = <0x0000ffe0>;
+			interrupts =<0 1 2 3 4 5 6 7>;
+			interrupt-parent = <&MSI>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			msi-available-ranges = <0x0 0x100>;
+			interrupt-map = <
+				0 &UIC3 0x18 1
+				1 &UIC3 0x19 1
+				2 &UIC3 0x1A 1
+				3 &UIC3 0x1B 1
+				4 &UIC3 0x1C 1
+				5 &UIC3 0x1D 1
+				6 &UIC3 0x1E 1
+				7 &UIC3 0x1F 1
+			>;
+		};
+	};
+};
diff --git a/src/powerpc/c2k.dts b/src/powerpc/c2k.dts
new file mode 100644
index 000000000000..1e32903cb0a8
--- /dev/null
+++ b/src/powerpc/c2k.dts
@@ -0,0 +1,366 @@
+/* Device Tree Source for GEFanuc C2K
+ *
+ * Author: Remi Machet <rmachet@slac.stanford.edu>
+ *
+ * Originated from prpmc2800.dts
+ *
+ * 2008 (c) Stanford University
+ * 2007 (c) MontaVista, Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "C2K";
+	compatible = "GEFanuc,C2K";
+	coherency-off;
+
+	aliases {
+		pci0 = &PCI0;
+		pci1 = &PCI1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "PowerPC,7447";
+			reg = <0>;
+			clock-frequency = <996000000>;	/* 996 MHz */
+			bus-frequency = <166666667>;	/* 166.6666 MHz */
+			timebase-frequency = <41666667>;	/* 166.6666/4 MHz */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;	/* 1GB */
+	};
+
+	system-controller@d8000000 { /* Marvell Discovery */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		model = "mv64460";
+		compatible = "marvell,mv64360";
+		clock-frequency = <166666667>;		/* 166.66... MHz */
+		reg = <0xd8000000 0x00010000>;
+		virtual-reg = <0xd8000000>;
+		ranges = <0xd4000000 0xd4000000 0x01000000	/* PCI 0 I/O Space */
+			  0x80000000 0x80000000 0x08000000	/* PCI 0 MEM Space */
+			  0xd0000000 0xd0000000 0x01000000	/* PCI 1 I/O Space */
+			  0xa0000000 0xa0000000 0x08000000	/* PCI 1 MEM Space */
+			  0xd8100000 0xd8100000 0x00010000	/* FPGA */
+			  0xd8110000 0xd8110000 0x00010000	/* FPGA USARTs */
+			  0xf8000000 0xf8000000 0x08000000	/* User FLASH */
+			  0x00000000 0xd8000000 0x00010000	/* Bridge's regs */
+			  0xd8140000 0xd8140000 0x00040000>;	/* Integrated SRAM */
+
+		mdio@2000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,mv64360-mdio";
+			reg = <0x2000 4>;
+			PHY0: ethernet-phy@0 {
+				interrupts = <76>;	/* GPP 12 */
+				interrupt-parent = <&PIC>;
+				reg = <0>;
+			};
+			PHY1: ethernet-phy@1 {
+				interrupts = <76>;	/* GPP 12 */
+				interrupt-parent = <&PIC>;
+				reg = <1>;
+			};
+			PHY2: ethernet-phy@2 {
+				interrupts = <76>;	/* GPP 12 */
+				interrupt-parent = <&PIC>;
+				reg = <2>;
+			};
+		};
+
+		ethernet-group@2000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,mv64360-eth-group";
+			reg = <0x2000 0x2000>;
+			ethernet@0 {
+				device_type = "network";
+				compatible = "marvell,mv64360-eth";
+				reg = <0>;
+				interrupts = <32>;
+				interrupt-parent = <&PIC>;
+				phy = <&PHY0>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+			ethernet@1 {
+				device_type = "network";
+				compatible = "marvell,mv64360-eth";
+				reg = <1>;
+				interrupts = <33>;
+				interrupt-parent = <&PIC>;
+				phy = <&PHY1>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+			ethernet@2 {
+				device_type = "network";
+				compatible = "marvell,mv64360-eth";
+				reg = <2>;
+				interrupts = <34>;
+				interrupt-parent = <&PIC>;
+				phy = <&PHY2>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+		};
+
+		SDMA0: sdma@4000 {
+			compatible = "marvell,mv64360-sdma";
+			reg = <0x4000 0xc18>;
+			virtual-reg = <0xd8004000>;
+			interrupt-base = <0>;
+			interrupts = <36>;
+			interrupt-parent = <&PIC>;
+		};
+
+		SDMA1: sdma@6000 {
+			compatible = "marvell,mv64360-sdma";
+			reg = <0x6000 0xc18>;
+			virtual-reg = <0xd8006000>;
+			interrupt-base = <0>;
+			interrupts = <38>;
+			interrupt-parent = <&PIC>;
+		};
+
+		BRG0: brg@b200 {
+			compatible = "marvell,mv64360-brg";
+			reg = <0xb200 0x8>;
+			clock-src = <8>;
+			clock-frequency = <133333333>;
+			current-speed = <115200>;
+		};
+
+		BRG1: brg@b208 {
+			compatible = "marvell,mv64360-brg";
+			reg = <0xb208 0x8>;
+			clock-src = <8>;
+			clock-frequency = <133333333>;
+			current-speed = <115200>;
+		};
+
+		CUNIT: cunit@f200 {
+			reg = <0xf200 0x200>;
+		};
+
+		MPSCROUTING: mpscrouting@b400 {
+			reg = <0xb400 0xc>;
+		};
+
+		MPSCINTR: mpscintr@b800 {
+			reg = <0xb800 0x100>;
+			virtual-reg = <0xd800b800>;
+		};
+
+		MPSC0: mpsc@8000 {
+			compatible = "marvell,mv64360-mpsc";
+			reg = <0x8000 0x38>;
+			virtual-reg = <0xd8008000>;
+			sdma = <&SDMA0>;
+			brg = <&BRG0>;
+			cunit = <&CUNIT>;
+			mpscrouting = <&MPSCROUTING>;
+			mpscintr = <&MPSCINTR>;
+			cell-index = <0>;
+			interrupts = <40>;
+			interrupt-parent = <&PIC>;
+		};
+
+		MPSC1: mpsc@9000 {
+			compatible = "marvell,mv64360-mpsc";
+			reg = <0x9000 0x38>;
+			virtual-reg = <0xd8009000>;
+			sdma = <&SDMA1>;
+			brg = <&BRG1>;
+			cunit = <&CUNIT>;
+			mpscrouting = <&MPSCROUTING>;
+			mpscintr = <&MPSCINTR>;
+			cell-index = <1>;
+			interrupts = <42>;
+			interrupt-parent = <&PIC>;
+		};
+
+		wdt@b410 {			/* watchdog timer */
+			compatible = "marvell,mv64360-wdt";
+			reg = <0xb410 0x8>;
+		};
+
+		i2c@c000 {
+			compatible = "marvell,mv64360-i2c";
+			reg = <0xc000 0x20>;
+			virtual-reg = <0xd800c000>;
+			interrupts = <37>;
+			interrupt-parent = <&PIC>;
+		};
+
+		PIC: pic {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			compatible = "marvell,mv64360-pic";
+			reg = <0x0000 0x88>;
+			interrupt-controller;
+		};
+
+		mpp@f000 {
+			compatible = "marvell,mv64360-mpp";
+			reg = <0xf000 0x10>;
+		};
+
+		gpp@f100 {
+			compatible = "marvell,mv64360-gpp";
+			reg = <0xf100 0x20>;
+		};
+
+		PCI0: pci@80000000 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			compatible = "marvell,mv64360-pci";
+			reg = <0x0cf8 0x8>;
+			ranges = <0x01000000 0x0 0x00000000 0xd4000000 0x0 0x01000000
+				  0x02000000 0x0 0x80000000 0x80000000 0x0 0x08000000>;
+			bus-range = <0 255>;
+			clock-frequency = <66000000>;
+			interrupt-pci-iack = <0x0c34>;
+			interrupt-parent = <&PIC>;
+			interrupt-map-mask = <0x0000 0x0 0x0 0x7>;
+			interrupt-map = <
+				/* Only one interrupt line for PMC0 slot (INTA) */
+				0x0000 0 0 1 &PIC 88
+			>;
+		};
+
+
+		PCI1: pci@a0000000 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			compatible = "marvell,mv64360-pci";
+			reg = <0x0c78 0x8>;
+			ranges = <0x01000000 0x0 0x00000000 0xd0000000 0x0 0x01000000
+				  0x02000000 0x0 0x80000000 0xa0000000 0x0 0x08000000>;
+			bus-range = <0 255>;
+			clock-frequency = <66000000>;
+			interrupt-pci-iack = <0x0cb4>;
+			interrupt-parent = <&PIC>;
+			interrupt-map-mask = <0xf800 0x00 0x00 0x7>;
+			interrupt-map = <
+				/* IDSEL 0x01: PMC1 ? */
+				0x0800 0 0 1 &PIC 88
+				/* IDSEL 0x02: cPCI bridge */
+				0x1000 0 0 1 &PIC 88
+				/* IDSEL 0x03: USB controller */
+				0x1800 0 0 1 &PIC 91
+				/* IDSEL 0x04: SATA controller */
+				0x2000 0 0 1 &PIC 95
+			>;
+		};
+
+		cpu-error@0070 {
+			compatible = "marvell,mv64360-cpu-error";
+			reg = <0x0070 0x10 0x0128 0x28>;
+			interrupts = <3>;
+			interrupt-parent = <&PIC>;
+		};
+
+		sram-ctrl@0380 {
+			compatible = "marvell,mv64360-sram-ctrl";
+			reg = <0x0380 0x80>;
+			interrupts = <13>;
+			interrupt-parent = <&PIC>;
+		};
+
+		pci-error@1d40 {
+			compatible = "marvell,mv64360-pci-error";
+			reg = <0x1d40 0x40 0x0c28 0x4>;
+			interrupts = <12>;
+			interrupt-parent = <&PIC>;
+		};
+
+		pci-error@1dc0 {
+			compatible = "marvell,mv64360-pci-error";
+			reg = <0x1dc0 0x40 0x0ca8 0x4>;
+			interrupts = <16>;
+			interrupt-parent = <&PIC>;
+		};
+
+		mem-ctrl@1400 {
+			compatible = "marvell,mv64360-mem-ctrl";
+			reg = <0x1400 0x60>;
+			interrupts = <17>;
+			interrupt-parent = <&PIC>;
+		};
+		/* Devices attached to the device controller */
+		devicebus@045c {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			compatible = "marvell,mv64306-devctrl";
+			reg = <0x45C 0x88>;
+			interrupts = <1>;
+			interrupt-parent = <&PIC>;
+			ranges = 	<0 0 0xd8100000 0x10000
+					 2 0 0xd8110000 0x10000
+					 4 0 0xf8000000 0x8000000>;
+			fpga@0,0 {
+				compatible = "sbs,fpga-c2k";
+				reg = <0 0 0x10000>;
+			};
+			fpga_usart@2,0 {
+				compatible = "sbs,fpga_usart-c2k";
+				reg = <2 0 0x10000>;
+			};
+			nor_flash@4,0 {
+				compatible = "cfi-flash";
+				reg = <4 0 0x8000000>; /* 128MB */
+				bank-width = <4>;
+				device-width = <1>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				partition@0 {
+					label = "boot";
+					reg = <0x00000000 0x00080000>;
+				};
+				partition@40000 {
+					label = "kernel";
+					reg = <0x00080000 0x00400000>;
+				};
+				partition@440000 {
+					label = "initrd";
+					reg = <0x00480000 0x00B80000>;
+				};
+				partition@1000000 {
+					label = "rootfs";
+					reg = <0x01000000 0x06800000>;
+				};
+				partition@7800000 {
+					label = "recovery";
+					reg = <0x07800000 0x00800000>;
+					read-only;
+				};
+			};
+		};
+	};
+	chosen {
+		linux,stdout-path = &MPSC0;
+	};
+};
diff --git a/src/powerpc/canyonlands.dts b/src/powerpc/canyonlands.dts
new file mode 100644
index 000000000000..0d6ac92d0f5e
--- /dev/null
+++ b/src/powerpc/canyonlands.dts
@@ -0,0 +1,566 @@
+/*
+ * Device Tree Source for AMCC Canyonlands (460EX)
+ *
+ * Copyright 2008-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,canyonlands";
+	compatible = "amcc,canyonlands";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,460EX";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			next-level-cache = <&L2C0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-460ex";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-460ex";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	CPM0: cpm {
+		compatible = "ibm,cpm";
+		dcr-access-method = "native";
+		dcr-reg = <0x160 0x003>;
+		unused-units = <0x00000100>;
+		idle-doze = <0x02000000>;
+		standby = <0xfeff791d>;
+	};
+
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-460ex", "ibm,l2-cache";
+		dcr-reg = <0x020 0x008		/* Internal SRAM DCR's */
+			   0x030 0x008>;	/* L2 cache DCR's */
+		cache-line-size = <32>;		/* 32 bytes */
+		cache-size = <262144>;		/* L2, 256K */
+		interrupt-parent = <&UIC1>;
+		interrupts = <11 1>;
+	};
+
+	plb {
+		compatible = "ibm,plb-460ex", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		CRYPTO: crypto@180000 {
+			compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto";
+			reg = <4 0x00180000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x1d 0x4>;
+		};
+
+		HWRNG: hwrng@110000 {
+			compatible = "amcc,ppc460ex-rng", "ppc4xx-rng";
+			reg = <4 0x00110000 0x50>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <16>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x3 0x4
+					/*TXDE*/  0x4 0x4
+					/*RXDE*/  0x5 0x4>;
+		};
+
+		USB0: ehci@bffd0400 {
+			compatible = "ibm,usb-ehci-460ex", "usb-ehci";
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x1d 4>;
+			reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>;
+		};
+
+		USB1: usb@bffd0000 {
+			compatible = "ohci-le";
+			reg = <4 0xbffd0000 0x60>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x1e 4>;
+		};
+
+		USBOTG0: usbotg@bff80000 {
+			compatible = "amcc,dwc-otg";
+			reg = <0x4 0xbff80000 0x10000>;
+			interrupt-parent = <&USBOTG0>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupts = <0x0 0x1 0x2>;
+			interrupt-map = </* USB-OTG */ 0x0 &UIC2 0x1c 0x4
+					 /* HIGH-POWER */ 0x1 &UIC1 0x1a 0x8
+					 /* DMA */ 0x2 &UIC0 0xc 0x4>;
+		};
+
+		AHBDMA: dma@bffd0800 {
+			compatible = "snps,dma-spear1340";
+			reg = <4 0xbffd0800 0x400>;
+			interrupt-parent = <&UIC3>;
+			interrupts = <0x5 0x4>;
+			#dma-cells = <3>;
+		};
+
+		SATA0: sata@bffd1000 {
+			compatible = "amcc,sata-460ex";
+			reg = <4 0xbffd1000 0x800>;
+			interrupt-parent = <&UIC3>;
+			interrupts = <0x0 0x4>;
+			dmas = <&AHBDMA 0 1 0>;
+			dma-names = "sata-dma";
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-460ex", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-460ex", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x6 0x4>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl512n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x04000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "ramdisk";
+						reg = <0x00200000 0x01400000>;
+					};
+					partition@1600000 {
+						label = "jffs2";
+						reg = <0x01600000 0x00400000>;
+					};
+					partition@1a00000 {
+						label = "user";
+						reg = <0x01a00000 0x02560000>;
+					};
+					partition@3f60000 {
+						label = "env";
+						reg = <0x03f60000 0x00040000>;
+					};
+					partition@3fa0000 {
+						label = "u-boot";
+						reg = <0x03fa0000 0x00060000>;
+					};
+				};
+
+				cpld@2,0 {
+					compatible = "amcc,ppc460ex-bcsr";
+					reg = <2 0x0 0x9>;
+				};
+
+				ndfc@3,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000003 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x00100000>;
+						};
+						partition@100000 {
+							label = "user";
+							reg = <0x00000000 0x03f00000>;
+						};
+					};
+				};
+			};
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1 0x4>;
+			};
+
+			UART1: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-460ex", "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+                                rtc@68 {
+                                        compatible = "st,m41t80";
+                                        reg = <0x68>;
+					interrupt-parent = <&UIC2>;
+					interrupts = <0x19 0x8>;
+                                };
+                                sttm@48 {
+                                        compatible = "ad,ad7414";
+                                        reg = <0x48>;
+					interrupt-parent = <&UIC1>;
+					interrupts = <0x14 0x8>;
+                                };
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-460ex", "ibm,iic";
+				reg = <0xef600800 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+			};
+
+			GPIO0: gpio@ef600b00 {
+				compatible = "ibm,ppc4xx-gpio";
+				reg = <0xef600b00 0x00000048>;
+				gpio-controller;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-460ex", "ibm,zmii";
+				reg = <0xef600d00 0x0000000c>;
+			};
+
+			RGMII0: emac-rgmii@ef601500 {
+				compatible = "ibm,rgmii-460ex", "ibm,rgmii";
+				reg = <0xef601500 0x00000008>;
+				has-mdio;
+			};
+
+			TAH0: emac-tah@ef601350 {
+				compatible = "ibm,tah-460ex", "ibm,tah";
+				reg = <0xef601350 0x00000030>;
+			};
+
+			TAH1: emac-tah@ef601450 {
+				compatible = "ibm,tah-460ex", "ibm,tah";
+				reg = <0xef601450 0x00000030>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-460ex", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
+				reg = <0xef600e00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-460ex", "ibm,emac4sync";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
+				reg = <0xef600f00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <8>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				tah-device = <&TAH1>;
+				tah-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+		};
+
+		PCIX0: pci@c0ec00000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pcix-460ex", "ibm,plb-pcix";
+			primary;
+			large-inbound-windows;
+			enable-msi-hole;
+			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
+			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 0 to 0x3f */
+			bus-range = <0x0 0x3f>;
+
+			/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
+		};
+
+		PCIE0: pciex@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08010000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 40 to 0x7f */
+			bus-range = <0x40 0x7f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pciex@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08011000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 80 to 0xbf */
+			bus-range = <0x80 0xbf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
+		};
+
+		MSI: ppc4xx-msi@C10000000 {
+			compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
+			reg = < 0xC 0x10000000 0x100>;
+			sdr-base = <0x36C>;
+			msi-data = <0x00000000>;
+			msi-mask = <0x44440000>;
+			interrupt-count = <3>;
+			interrupts = <0 1 2 3>;
+			interrupt-parent = <&UIC3>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0 &UIC3 0x18 1
+					1 &UIC3 0x19 1
+					2 &UIC3 0x1A 1
+					3 &UIC3 0x1B 1>;
+		};
+	};
+};
diff --git a/src/powerpc/charon.dts b/src/powerpc/charon.dts
new file mode 100644
index 000000000000..0e00e508eaa6
--- /dev/null
+++ b/src/powerpc/charon.dts
@@ -0,0 +1,236 @@
+/*
+ * charon board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * Copyright (C) 2010 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "anon,charon";
+	compatible = "anon,charon";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;	// 128MB
+	};
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>;		// from bootloader
+		system-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+		};
+
+		timer@600 {	// General Purpose Timer
+			compatible = "fsl,mpc5200-gpt";
+			reg = <0x600 0x10>;
+			interrupts = <1 9 0>;
+			fsl,has-wdt;
+		};
+
+		can@900 {
+			compatible = "fsl,mpc5200-mscan";
+			interrupts = <2 17 0>;
+			reg = <0x900 0x80>;
+		};
+
+		can@980 {
+			compatible = "fsl,mpc5200-mscan";
+			interrupts = <2 18 0>;
+			reg = <0x980 0x80>;
+		};
+
+		gpio_simple: gpio@b00 {
+			compatible = "fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		usb@1000 {
+			compatible = "fsl,mpc5200-ohci","ohci-be";
+			reg = <0x1000 0xff>;
+			interrupts = <2 6 0>;
+		};
+
+		dma-controller@1200 {
+			device_type = "dma-controller";
+			compatible = "fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		serial@2000 {		// PSC1
+			compatible = "fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		serial@2400 {		// PSC3
+			compatible = "fsl,mpc5200-psc-uart";
+			reg = <0x2400 0x100>;
+			interrupts = <2 3 0>;
+		};
+
+		ethernet@3000 {
+			compatible = "fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+			fixed-link = <1 1 100 0 0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		i2c@3d00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d00 0x40>;
+			interrupts = <2 15 0>;
+		};
+
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+
+			dtt@28 {
+				compatible = "national,lm80";
+				reg = <0x28>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <	0 0 0xfc000000 0x02000000
+				1 0 0xe0000000 0x04000000 // CS1 range, SM501
+				3 0 0xe8000000 0x00080000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
+
+		display@1,0 {
+			compatible = "smi,sm501";
+			reg = <1 0x00000000 0x00800000
+			       1 0x03e00000 0x00200000>;
+			mode = "640x480-32@60";
+			interrupts = <1 1 3>;
+			little-endian;
+		};
+
+		mram0@3,0 {
+			compatible = "mtd-ram";
+			reg = <3 0x00000 0x80000>;
+			bank-width = <1>;
+		};
+	};
+
+	pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
+				 0xc000 0 0 2 &mpc5200_pic 0 0 3
+				 0xc000 0 0 3 &mpc5200_pic 0 0 3
+				 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+	};
+};
diff --git a/src/powerpc/cm5200.dts b/src/powerpc/cm5200.dts
new file mode 100644
index 000000000000..fb580dd84ddf
--- /dev/null
+++ b/src/powerpc/cm5200.dts
@@ -0,0 +1,89 @@
+/*
+ * CM5200 board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 { fsl,has-wdt; };
+
+/ {
+	model = "schindler,cm5200";
+	compatible = "schindler,cm5200";
+
+	soc5200@f0000000 {
+		can@900 {
+			status = "disabled";
+		};
+
+		can@980 {
+			status = "disabled";
+		};
+
+		psc@2000 {		// PSC1
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2200 {		// PSC2
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2400 {		// PSC3
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2600 {		// PSC4
+			status = "disabled";
+		};
+
+		psc@2800 {		// PSC5
+			status = "disabled";
+		};
+
+		psc@2c00 {		// PSC6
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		ata@3a00 {
+			status = "disabled";
+		};
+
+		i2c@3d00 {
+			status = "disabled";
+		};
+
+	};
+
+	pci@f0000d00 {
+		status = "disabled";
+	};
+
+	localbus {
+		// 16-bit flash device at LocalPlus Bus CS0
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x2000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
+	};
+};
diff --git a/src/powerpc/currituck.dts b/src/powerpc/currituck.dts
new file mode 100644
index 000000000000..4191e1850ea1
--- /dev/null
+++ b/src/powerpc/currituck.dts
@@ -0,0 +1,242 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright © 2011 Tony Breeds IBM Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x01f00000 0x00100000;	// spin table
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "ibm,currituck";
+	compatible = "ibm,currituck";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,476";
+			reg = <0>;
+			clock-frequency = <1600000000>; // 1.6 GHz
+			timebase-frequency = <100000000>; // 100Mhz
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "ok";
+		};
+		cpu@1 {
+			device_type = "cpu";
+			model = "PowerPC,476";
+			reg = <1>;
+			clock-frequency = <1600000000>; // 1.6 GHz
+			timebase-frequency = <100000000>; // 100Mhz
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "disabled";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x01f00000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>; // filled in by zImage
+	};
+
+	MPIC: interrupt-controller {
+		compatible = "chrp,open-pic";
+		interrupt-controller;
+		dcr-reg = <0xffc00000 0x00040000>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+	};
+
+	plb {
+		compatible = "ibm,plb6";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		clock-frequency = <200000000>; // 200Mhz
+
+		POB0: opb {
+			compatible = "ibm,opb-4xx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Wish there was a nicer way of specifying a full
+			 * 32-bit range
+			 */
+			ranges = <0x00000000 0x00000200 0x00000000 0x80000000
+				  0x80000000 0x00000200 0x80000000 0x80000000>;
+			clock-frequency = <100000000>;
+
+			UART0: serial@10000000 {
+				device_type = "serial";
+				compatible = "ns16750", "ns16550";
+				reg = <0x10000000 0x00000008>;
+				virtual-reg = <0xe1000000>;
+				clock-frequency = <1851851>; // PCIe refclk/MCGC0_CTL[UART]
+				current-speed = <115200>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <34 2>;
+			};
+
+			FPGA0: fpga@50000000 {
+				compatible = "ibm,currituck-fpga";
+				reg = <0x50000000 0x4>;
+			};
+
+			IIC0: i2c@00000000 {
+				compatible = "ibm,iic-currituck", "ibm,iic";
+				reg = <0x0 0x00000014>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <79 2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+                                rtc@68 {
+                                        compatible = "st,m41t80", "m41st85";
+                                        reg = <0x68>;
+                                };
+			};
+		};
+
+		PCIE0: pciex@10100000000 {		// 4xGBIF1
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x00000101 0x00000000 0x0 0x10000000		/* Config space access */
+			       0x00000100 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0x80 0x20>;
+
+//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x00000140 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0 to memsize filled in by zImage */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 46 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 47 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 48 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 49 0x2 /* int D */>;
+		};
+
+		PCIE1: pciex@30100000000 {		// 4xGBIF0
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x00000301 0x00000000 0x0 0x10000000		/* Config space access */
+			       0x00000300 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0x60 0x20>;
+
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000310 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x00000340 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0 to memsize filled in by zImage */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 38 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 39 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 40 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 41 0x2 /* int D */>;
+		};
+
+		PCIE2: pciex@38100000000 {		// 2xGBIF0
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x2>; /* port number */
+			reg = <0x00000381 0x00000000 0x0 0x10000000		/* Config space access */
+			       0x00000380 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0xA0 0x20>;
+
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000390 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x000003C0 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0 to memsize filled in by zImage */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 54 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 55 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 56 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 57 0x2 /* int D */>;
+		};
+
+	};
+
+	chosen {
+		linux,stdout-path = &UART0;
+	};
+};
diff --git a/src/powerpc/digsy_mtc.dts b/src/powerpc/digsy_mtc.dts
new file mode 100644
index 000000000000..955bff629df3
--- /dev/null
+++ b/src/powerpc/digsy_mtc.dts
@@ -0,0 +1,161 @@
+/*
+ * Digsy MTC board Device Tree Source
+ *
+ * Copyright (C) 2009 Semihalf
+ *
+ * Based on the CM5200 by M. Balakowicz
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 { gpio-controller; fsl,has-wdt; };
+&gpt1 { gpio-controller; };
+
+/ {
+	model = "intercontrol,digsy-mtc";
+	compatible = "intercontrol,digsy-mtc";
+
+	memory {
+		reg = <0x00000000 0x02000000>;	// 32MB
+	};
+
+	soc5200@f0000000 {
+		rtc@800 {
+			status = "disabled";
+		};
+
+		spi@f00 {
+			msp430@0 {
+				compatible = "spidev";
+				spi-max-frequency = <32000>;
+				reg = <0>;
+			};
+		};
+
+		psc@2000 {		// PSC1
+			status = "disabled";
+		};
+
+		psc@2200 {		// PSC2
+			status = "disabled";
+		};
+
+		psc@2400 {		// PSC3
+			status = "disabled";
+		};
+
+		psc@2600 {		// PSC4
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2800 {		// PSC5
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2c00 {		// PSC6
+			status = "disabled";
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		i2c@3d00 {
+			eeprom@50 {
+				compatible = "at,24c08";
+				reg = <0x50>;
+			};
+
+			rtc@56 {
+				compatible = "mc,rv3029c2";
+				reg = <0x56>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3d40 {
+			status = "disabled";
+		};
+	};
+
+	pci@f0000d00 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
+				 0xc000 0 0 2 &mpc5200_pic 0 0 3
+				 0xc000 0 0 3 &mpc5200_pic 0 0 3
+				 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+	};
+
+	localbus {
+		ranges = <0 0 0xff000000 0x1000000
+			  4 0 0x60000000 0x0001000>;
+
+		// 16-bit flash device at LocalPlus Bus CS0
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x1000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x0 0x00200000>;
+			};
+			partition@200000 {
+				label = "root";
+				reg = <0x00200000 0x00300000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x00a00000>;
+			};
+			partition@f00000 {
+				label = "u-boot";
+				reg = <0x00f00000 0x100000>;
+			};
+		};
+
+		can@4,0 {
+			compatible = "nxp,sja1000";
+			reg = <4 0x000 0x80>;
+			nxp,external-clock-frequency = <24000000>;
+			interrupts = <1 2 3>; // Level-low
+		};
+
+		can@4,100 {
+			compatible = "nxp,sja1000";
+			reg = <4 0x100 0x80>;
+			nxp,external-clock-frequency = <24000000>;
+			interrupts = <1 2 3>;  // Level-low
+		};
+
+		serial@4,200 {
+			compatible = "nxp,sc28l92";
+			reg = <4 0x200 0x10>;
+			interrupts = <1 3 3>;
+		};
+	};
+};
diff --git a/src/powerpc/ebony.dts b/src/powerpc/ebony.dts
new file mode 100644
index 000000000000..ec2d142291b4
--- /dev/null
+++ b/src/powerpc/ebony.dts
@@ -0,0 +1,337 @@
+/*
+ * Device Tree Source for IBM Ebony
+ *
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
+ *
+ * FIXME: Draft only!
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "ibm,ebony";
+	compatible = "ibm,ebony";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440GP";
+			reg = <0x00000000>;
+			clock-frequency = <0>; // Filled in by zImage
+			timebase-frequency = <0>; // Filled in by zImage
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>; /* 32 kB */
+			d-cache-size = <32768>; /* 32 kB */
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440gp", "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440gp", "ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	CPC0: cpc {
+		compatible = "ibm,cpc-440gp";
+		dcr-reg = <0x0b0 0x003 0x0e0 0x010>;
+		// FIXME: anything else?
+	};
+
+	plb {
+		compatible = "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; // Filled in by zImage
+
+		SDRAM0: memory-controller {
+			compatible = "ibm,sdram-440gp";
+			dcr-reg = <0x010 0x002>;
+			// FIXME: anything else?
+		};
+
+		SRAM0: sram {
+			compatible = "ibm,sram-440gp";
+			dcr-reg = <0x020 0x008 0x00a 0x001>;
+		};
+
+		DMA0: dma {
+			// FIXME: ???
+			compatible = "ibm,dma-440gp";
+			dcr-reg = <0x100 0x027>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440gp", "ibm,mcmal";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <4>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					 /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					 /*SERR*/  0x2 &UIC1 0x0 0x4
+					 /*TXDE*/  0x3 &UIC1 0x1 0x4
+					 /*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Wish there was a nicer way of specifying a full 32-bit
+			   range */
+			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+				  0x80000000 0x00000001 0x80000000 0x80000000>;
+			dcr-reg = <0x090 0x00b>;
+			interrupt-parent = <&UIC1>;
+			interrupts = <0x7 0x4>;
+			clock-frequency = <0>; // Filled in by zImage
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; // Filled in by zImage
+				// ranges property is supplied by zImage
+				// based on firmware's configuration of the
+				// EBC bridge
+				interrupts = <0x5 0x4>;
+				interrupt-parent = <&UIC1>;
+
+				small-flash@0,80000 {
+					compatible = "jedec-flash";
+					bank-width = <1>;
+					reg = <0x00000000 0x00080000 0x00080000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "OpenBIOS";
+						reg = <0x00000000 0x00080000>;
+						read-only;
+					};
+				};
+
+				nvram@1,0 {
+					/* NVRAM & RTC */
+					compatible = "ds1743-nvram";
+					#bytes = <0x2000>;
+					reg = <0x00000001 0x00000000 0x00002000>;
+				};
+
+				large-flash@2,0 {
+					compatible = "jedec-flash";
+					bank-width = <1>;
+					reg = <0x00000002 0x00000000 0x00400000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "fs";
+						reg = <0x00000000 0x00380000>;
+					};
+					partition@380000 {
+						label = "firmware";
+						reg = <0x00380000 0x00080000>;
+					};
+				};
+
+				ir@3,0 {
+					reg = <0x00000003 0x00000000 0x00000010>;
+				};
+
+				fpga@7,0 {
+					compatible = "Ebony-FPGA";
+					reg = <0x00000007 0x00000000 0x00000010>;
+					virtual-reg = <0xe8300000>;
+				};
+			};
+
+			UART0: serial@40000200 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0x40000200 0x00000008>;
+				virtual-reg = <0xe0000200>;
+				clock-frequency = <11059200>;
+				current-speed = <9600>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			UART1: serial@40000300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0x40000300 0x00000008>;
+				virtual-reg = <0xe0000300>;
+				clock-frequency = <11059200>;
+				current-speed = <9600>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@40000400 {
+				/* FIXME */
+				compatible = "ibm,iic-440gp", "ibm,iic";
+				reg = <0x40000400 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+			IIC1: i2c@40000500 {
+				/* FIXME */
+				compatible = "ibm,iic-440gp", "ibm,iic";
+				reg = <0x40000500 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+			};
+
+			GPIO0: gpio@40000700 {
+				/* FIXME */
+				compatible = "ibm,gpio-440gp";
+				reg = <0x40000700 0x00000020>;
+			};
+
+			ZMII0: emac-zmii@40000780 {
+				compatible = "ibm,zmii-440gp", "ibm,zmii";
+				reg = <0x40000780 0x0000000c>;
+			};
+
+			EMAC0: ethernet@40000800 {
+				device_type = "network";
+				compatible = "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0x40000800 0x00000070>;
+				local-mac-address = [000000000000]; // Filled in by zImage
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0 1>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rmii";
+				phy-map = <0x00000001>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <0>;
+			};
+			EMAC1: ethernet@40000900 {
+				device_type = "network";
+				compatible = "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0x40000900 0x00000070>;
+				local-mac-address = [000000000000]; // Filled in by zImage
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2 3>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rmii";
+				phy-map = <0x00000001>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <1>;
+			};
+
+
+			GPT0: gpt@40000a00 {
+				/* FIXME */
+				reg = <0x40000a00 0x000000d4>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>;
+			};
+
+		};
+
+		PCIX0: pci@20ec00000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix";
+			primary;
+			reg = <0x00000002 0x0ec00000 0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x00000002 0x0ed00000 0x00000004     /* Special cycles */
+			       0x00000002 0x0ec80000 0x000000f0	/* Internal registers */
+			       0x00000002 0x0ec80100 0x000000fc>;	/* Internal messaging registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* Ebony has all 4 IRQ pins tied together per slot */
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
+			interrupt-map = <
+				/* IDSEL 1 */
+				0x800 0x0 0x0 0x0 &UIC0 0x17 0x8
+
+				/* IDSEL 2 */
+				0x1000 0x0 0x0 0x0 &UIC0 0x18 0x8
+
+				/* IDSEL 3 */
+				0x1800 0x0 0x0 0x0 &UIC0 0x19 0x8
+
+				/* IDSEL 4 */
+				0x2000 0x0 0x0 0x0 &UIC0 0x1a 0x8
+			>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@40000200";
+	};
+};
diff --git a/src/powerpc/eiger.dts b/src/powerpc/eiger.dts
new file mode 100644
index 000000000000..48bcf7187924
--- /dev/null
+++ b/src/powerpc/eiger.dts
@@ -0,0 +1,427 @@
+/*
+ * Device Tree Source for AMCC (AppliedMicro) Eiger(460SX)
+ *
+ * Copyright 2009 AMCC (AppliedMicro) <ttnguyen@amcc.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,eiger";
+	compatible = "amcc,eiger";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		ethernet2 = &EMAC2;
+		ethernet3 = &EMAC3;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,460SX";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-460sx","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-460sx","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-460sx","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-460sx","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-460sx";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-460sx";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-460sx", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-460sx", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-460sx", "ibm,mcmal2";
+			dcr-reg = <0x180 0x62>;
+			num-tx-chans = <4>;
+			num-rx-chans = <32>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&UIC1>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x1 0x4
+					/*TXDE*/  0x2 0x4
+					/*RXDE*/  0x3 0x4
+					/*COAL TX0*/ 0x18 0x2
+					/*COAL TX1*/ 0x19 0x2
+					/*COAL TX2*/ 0x1a 0x2
+					/*COAL TX3*/ 0x1b 0x2
+					/*COAL RX0*/ 0x1c 0x2
+					/*COAL RX1*/ 0x1d 0x2
+					/*COAL RX2*/ 0x1e 0x2
+					/*COAL RX3*/ 0x1f 0x2>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-460sx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-460sx", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x6 0x4>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl512n", "cfi-flash";
+					bank-width = <2>;
+					/* reg property is supplied in by U-Boot */
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "ramdisk";
+						reg = <0x00200000 0x01400000>;
+					};
+					partition@1600000 {
+						label = "jffs2";
+						reg = <0x01600000 0x00400000>;
+					};
+					partition@1a00000 {
+						label = "user";
+						reg = <0x01a00000 0x02560000>;
+					};
+					partition@3f60000 {
+						label = "env";
+						reg = <0x03f60000 0x00040000>;
+					};
+					partition@3fa0000 {
+						label = "u-boot";
+						reg = <0x03fa0000 0x00060000>;
+					};
+				};
+
+				ndfc@1,0 {
+					compatible = "ibm,ndfc";
+					/* reg property is supplied by U-boot */
+					ccr = <0x00003000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+						partition@0 {
+							label = "uboot";
+							reg = <0x00000000 0x00200000>;
+						};
+						partition@200000 {
+							label = "uboot-environment";
+							reg = <0x00200000 0x00100000>;
+						};
+						partition@300000 {
+							label = "linux";
+							reg = <0x00300000 0x00300000>;
+						};
+						partition@600000 {
+							label = "root-file-system";
+							reg = <0x00600000 0x01900000>;
+						};
+						partition@1f00000 {
+							label = "device-tree";
+							reg = <0x01f00000 0x00020000>;
+						};
+						partition@1f20000 {
+							label = "data";
+							reg = <0x01f20000 0x060E0000>;
+						};
+					};
+				};
+			};
+
+			UART0: serial@ef600200 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600200 0x00000008>;
+				virtual-reg = <0xef600200>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			UART1: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@ef600400 {
+				compatible = "ibm,iic-460sx", "ibm,iic";
+				reg = <0xef600400 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				index = <0>;
+			};
+
+			IIC1: i2c@ef600500 {
+				compatible = "ibm,iic-460sx", "ibm,iic";
+				reg = <0xef600500 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				index = <1>;
+			};
+
+			RGMII0: emac-rgmii@ef600900 {
+				compatible = "ibm,rgmii-460sx", "ibm,rgmii";
+				reg = <0xef600900 0x00000008>;
+				has-mdio;
+			};
+
+			RGMII1: emac-rgmii@ef600920 {
+				compatible = "ibm,rgmii-460sx", "ibm,rgmii";
+				reg = <0xef600920 0x00000008>;
+				has-mdio;
+			};
+
+			TAH0: emac-tah@ef600e50 {
+				compatible = "ibm,tah-460sx", "ibm,tah";
+				reg = <0xef600e50 0x00000030>;
+			};
+
+			TAH1: emac-tah@ef600f50 {
+				compatible = "ibm,tah-460sx", "ibm,tah";
+				reg = <0xef600f50 0x00000030>;
+			};
+
+			EMAC0: ethernet@ef600a00 {
+				device_type = "network";
+				compatible = "ibm,emac-460sx", "ibm,emac4";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4
+						 /*Wake*/   0x1 &UIC2 0x1d 0x4>;
+				reg = <0xef600a00 0x00000070>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600b00 {
+				device_type = "network";
+				compatible = "ibm,emac-460sx", "ibm,emac4";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4
+						 /*Wake*/   0x1 &UIC2 0x1d 0x4>;
+				reg = <0xef600b00 0x00000070>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <8>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				tah-device = <&TAH1>;
+				tah-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+
+			EMAC2: ethernet@ef600c00 {
+				device_type = "network";
+				compatible = "ibm,emac-460sx", "ibm,emac4";
+				interrupt-parent = <&EMAC2>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x15 0x4
+						 /*Wake*/   0x1 &UIC2 0x1d 0x4>;
+				reg = <0xef600c00 0x00000070>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2>;
+				mal-rx-channel = <16>;
+				cell-index = <2>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>; /* emac2&3 only */
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII1>;
+				rgmii-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+
+			EMAC3: ethernet@ef600d00 {
+				device_type = "network";
+				compatible = "ibm,emac-460sx", "ibm,emac4";
+				interrupt-parent = <&EMAC3>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x16 0x4
+						 /*Wake*/   0x1 &UIC2 0x1d 0x4>;
+				reg = <0xef600d00 0x00000070>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <3>;
+				mal-rx-channel = <24>;
+				cell-index = <3>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>; /* emac2&3 only */
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII1>;
+				rgmii-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+		};
+
+	};
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600200";
+	};
+
+};
diff --git a/src/powerpc/ep405.dts b/src/powerpc/ep405.dts
new file mode 100644
index 000000000000..53ef06cc2134
--- /dev/null
+++ b/src/powerpc/ep405.dts
@@ -0,0 +1,230 @@
+/*
+ * Device Tree Source for EP405
+ *
+ * Copyright 2007 IBM Corp.
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "ep405";
+	compatible = "ep405";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,405GP";
+			reg = <0x00000000>;
+			clock-frequency = <200000000>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>;
+			d-cache-size = <16384>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	plb {
+		compatible = "ibm,plb3";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: memory-controller {
+			compatible = "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL: mcmal {
+			compatible = "ibm,mcmal-405gp", "ibm,mcmal";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <1>;
+			num-rx-chans = <1>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <
+				0xb 0x4 /* TXEOB */
+				0xc 0x4 /* RXEOB */
+				0xa 0x4 /* SERR */
+				0xd 0x4 /* TXDE */
+				0xe 0x4 /* RXDE */>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-405gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xef600000 0xef600000 0x00a00000>;
+			dcr-reg = <0x0a0 0x005>;
+			clock-frequency = <0>; /* Filled in by zImage */
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				current-speed = <9600>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			UART1: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				current-speed = <9600>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC: i2c@ef600500 {
+				compatible = "ibm,iic-405gp", "ibm,iic";
+				reg = <0xef600500 0x00000011>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+
+			GPIO: gpio@ef600700 {
+				compatible = "ibm,gpio-405gp";
+				reg = <0xef600700 0x00000020>;
+			};
+
+			EMAC: ethernet@ef600800 {
+				linux,network-index = <0x0>;
+				device_type = "network";
+				compatible = "ibm,emac-405gp", "ibm,emac";
+				interrupt-parent = <&UIC0>;
+				interrupts = <
+					0xf 0x4 /* Ethernet */
+					0x9 0x4 /* Ethernet Wake Up */>;
+				local-mac-address = [000000000000]; /* Filled in by zImage */
+				reg = <0xef600800 0x00000070>;
+				mal-device = <&MAL>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rmii";
+				phy-map = <0x00000000>;
+			};
+
+		};
+
+		EBC0: ebc {
+			compatible = "ibm,ebc-405gp", "ibm,ebc";
+			dcr-reg = <0x012 0x002>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+
+
+			/* The ranges property is supplied by the bootwrapper
+			 * and is based on the firmware's configuration of the
+			 * EBC bridge
+			 */
+			clock-frequency = <0>; /* Filled in by zImage */
+
+			/* NVRAM and RTC */
+			nvrtc@4,200000 {
+				compatible = "ds1742";
+				reg = <0x00000004 0x00200000 0x00000000>; /* size fixed up by zImage */
+			};
+
+			/* "BCSR" CPLD contains a PCI irq controller */
+			bcsr@4,0 {
+				compatible = "ep405-bcsr";
+				reg = <0x00000004 0x00000000 0x00000010>;
+				interrupt-controller;
+				/* Routing table */
+				irq-routing = [	00	/* SYSERR */
+						01	/* STTM */
+						01	/* RTC */
+						01	/* FENET */
+						02	/* NB PCIIRQ mux ? */
+						03	/* SB Winbond 8259 ? */
+						04	/* Serial Ring */
+						05	/* USB (ep405pc) */
+						06	/* XIRQ 0 */
+						06	/* XIRQ 1 */
+						06	/* XIRQ 2 */
+						06	/* XIRQ 3 */
+						06	/* XIRQ 4 */
+						06	/* XIRQ 5 */
+						06	/* XIRQ 6 */
+						07];	/* Reserved */
+			};
+		};
+
+		PCI0: pci@ec000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb405gp-pci", "ibm,plb-pci";
+			primary;
+			reg = <0xeec00000 0x00000008	/* Config space access */
+			       0xeed80000 0x00000004	/* IACK */
+			       0xeed80000 0x00000004	/* Special cycle */
+			       0xef480000 0x00000040>;	/* Internal registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed. Chip supports a second
+			 * IO range but we don't use it for now
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
+				  0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* That's all I know about IRQs on that thing ... */
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
+			interrupt-map = <
+				/* USB */
+				0x7000 0x0 0x0 0x0 &UIC0 0x1e 0x8 /* IRQ5 */
+			>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600300";
+	};
+};
diff --git a/src/powerpc/ep8248e.dts b/src/powerpc/ep8248e.dts
new file mode 100644
index 000000000000..8b3a49f34f5a
--- /dev/null
+++ b/src/powerpc/ep8248e.dts
@@ -0,0 +1,203 @@
+/*
+ * Device Tree for the Embedded Planet EP8248E board running PlanetCore.
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "EP8248E";
+	compatible = "fsl,ep8248e";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		planetcore-SMC1 = &smc1;
+		planetcore-SCC1 = &scc1;
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		serial0 = &smc1;
+		serial1 = &scc1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8248@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
+			timebase-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	localbus@f0010100 {
+		compatible = "fsl,mpc8248-localbus",
+		             "fsl,pq2-localbus",
+		             "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xf0010100 0x40>;
+
+		ranges = <0 0 0xfc000000 0x04000000
+		          1 0 0xfa000000 0x00008000>;
+
+		flash@0,3800000 {
+			compatible = "cfi-flash";
+			reg = <0 0x3800000 0x800000>;
+			bank-width = <4>;
+			device-width = <2>;
+		};
+
+		bcsr@1,0 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			reg = <1 0 0x10>;
+			compatible = "fsl,ep8248e-bcsr";
+			ranges;
+
+			mdio {
+				compatible = "fsl,ep8248e-mdio-bitbang";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1 8 1>;
+
+				PHY0: ethernet-phy@0 {
+					interrupt-parent = <&PIC>;
+					reg = <0>;
+				};
+
+				PHY1: ethernet-phy@1 {
+					interrupt-parent = <&PIC>;
+					reg = <1>;
+				};
+			};
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
+	soc@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8248-immr", "fsl,pq2-soc", "simple-bus";
+		ranges = <0x00000000 0xf0000000 0x00053000>;
+
+		// Temporary until code stops depending on it.
+		device_type = "soc";
+
+		// Temporary -- will go away once kernel uses ranges for get_immrbase().
+		reg = <0xf0000000 0x00053000>;
+
+		cpm@119c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#interrupt-cells = <2>;
+			compatible = "fsl,mpc8248-cpm", "fsl,cpm2",
+			             "simple-bus";
+			reg = <0x119c0 0x30>;
+			ranges;
+
+			muram {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0 0x2000 0x9800 0x800>;
+				};
+			};
+
+			brg@119f0 {
+				compatible = "fsl,mpc8248-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <0x119f0 0x10 0x115f0 0x10>;
+			};
+
+			/* Monitor port/SMC1 */
+			smc1: serial@11a80 {
+				device_type = "serial";
+				compatible = "fsl,mpc8248-smc-uart",
+				             "fsl,cpm2-smc-uart";
+				reg = <0x11a80 0x20 0x87fc 2>;
+				interrupts = <4 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-brg = <7>;
+				fsl,cpm-command = <0x1d000000>;
+				linux,planetcore-label = "SMC1";
+			};
+
+			/* "Serial" port/SCC1 */
+			scc1: serial@11a00 {
+				device_type = "serial";
+				compatible = "fsl,mpc8248-scc-uart",
+				             "fsl,cpm2-scc-uart";
+				reg = <0x11a00 0x20 0x8000 0x100>;
+				interrupts = <40 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x00800000>;
+				linux,planetcore-label = "SCC1";
+			};
+
+			eth0: ethernet@11300 {
+				device_type = "network";
+				compatible = "fsl,mpc8248-fcc-enet",
+				             "fsl,cpm2-fcc-enet";
+				reg = <0x11300 0x20 0x8400 0x100 0x11390 1>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				interrupts = <32 8>;
+				interrupt-parent = <&PIC>;
+				phy-handle = <&PHY0>;
+				linux,network-index = <0>;
+				fsl,cpm-command = <0x12000300>;
+			};
+
+			eth1: ethernet@11320 {
+				device_type = "network";
+				compatible = "fsl,mpc8248-fcc-enet",
+				             "fsl,cpm2-fcc-enet";
+				reg = <0x11320 0x20 0x8500 0x100 0x113b0 1>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				interrupts = <33 8>;
+				interrupt-parent = <&PIC>;
+				phy-handle = <&PHY1>;
+				linux,network-index = <1>;
+				fsl,cpm-command = <0x16200300>;
+			};
+
+			usb@11b60 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,mpc8248-usb",
+				             "fsl,cpm2-usb";
+				reg = <0x11b60 0x18 0x8b00 0x100>;
+				interrupt-parent = <&PIC>;
+				interrupts = <11 8>;
+				fsl,cpm-command = <0x2e600000>;
+			};
+		};
+
+		PIC: interrupt-controller@10c00 {
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0x10c00 0x80>;
+			compatible = "fsl,mpc8248-pic", "fsl,pq2-pic";
+		};
+	};
+};
diff --git a/src/powerpc/ep88xc.dts b/src/powerpc/ep88xc.dts
new file mode 100644
index 000000000000..2aa5bf559645
--- /dev/null
+++ b/src/powerpc/ep88xc.dts
@@ -0,0 +1,213 @@
+/*
+ * EP88xC Device Tree Source
+ *
+ * Copyright 2006 MontaVista Software, Inc.
+ * Copyright 2007,2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "EP88xC";
+	compatible = "fsl,ep88xc";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,885@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <16>;
+			i-cache-line-size = <16>;
+			d-cache-size = <8192>;
+			i-cache-size = <8192>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			interrupts = <15 2>;	// decrementer interrupt
+			interrupt-parent = <&PIC>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	localbus@fa200100 {
+		compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xfa200100 0x40>;
+
+		ranges = <
+			0x0 0x0 0xfc000000 0x4000000
+			0x3 0x0 0xfa000000 0x1000000
+		>;
+
+		flash@0,2000000 {
+			compatible = "cfi-flash";
+			reg = <0x0 0x2000000 0x2000000>;
+			bank-width = <4>;
+			device-width = <2>;
+		};
+
+		board-control@3,400000 {
+			reg = <0x3 0x400000 0x10>;
+			compatible = "fsl,ep88xc-bcsr";
+		};
+	};
+
+	soc@fa200000 {
+		compatible = "fsl,mpc885", "fsl,pq1-soc";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xfa200000 0x4000>;
+		bus-frequency = <0>;
+
+		// Temporary -- will go away once kernel uses ranges for get_immrbase().
+		reg = <0xfa200000 0x4000>;
+
+		mdio@e00 {
+			compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
+			reg = <0xe00 0x188>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			PHY0: ethernet-phy@0 {
+				reg = <0x0>;
+			};
+
+			PHY1: ethernet-phy@1 {
+				reg = <0x1>;
+			};
+		};
+
+		ethernet@e00 {
+			device_type = "network";
+			compatible = "fsl,mpc885-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <0xe00 0x188>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <3 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY0>;
+			linux,network-index = <0>;
+		};
+
+		ethernet@1e00 {
+			device_type = "network";
+			compatible = "fsl,mpc885-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <0x1e00 0x188>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <7 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY1>;
+			linux,network-index = <1>;
+		};
+
+		PIC: interrupt-controller@0 {
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x0 0x24>;
+			compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
+		};
+
+		pcmcia@80 {
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			compatible = "fsl,pq-pcmcia";
+			device_type = "pcmcia";
+			reg = <0x80 0x80>;
+			interrupt-parent = <&PIC>;
+			interrupts = <13 1>;
+		};
+
+		cpm@9c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc885-cpm", "fsl,cpm1";
+			command-proc = <0x9c0>;
+			interrupts = <0>;	// cpm error interrupt
+			interrupt-parent = <&CPM_PIC>;
+			reg = <0x9c0 0x40>;
+			ranges;
+
+			muram@2000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x2000 0x2000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x1c00>;
+				};
+			};
+
+			brg@9f0 {
+				compatible = "fsl,mpc885-brg",
+				             "fsl,cpm1-brg",
+				             "fsl,cpm-brg";
+				reg = <0x9f0 0x10>;
+			};
+
+			CPM_PIC: interrupt-controller@930 {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupts = <5 2 0 2>;
+				interrupt-parent = <&PIC>;
+				reg = <0x930 0x20>;
+				compatible = "fsl,mpc885-cpm-pic",
+				             "fsl,cpm1-pic";
+			};
+
+			// MON-1
+			serial@a80 {
+				device_type = "serial";
+				compatible = "fsl,mpc885-smc-uart",
+				             "fsl,cpm1-smc-uart";
+				reg = <0xa80 0x10 0x3e80 0x40>;
+				interrupts = <4>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x90>;
+				linux,planetcore-label = "SMC1";
+			};
+
+			// SER-1
+			serial@a20 {
+				device_type = "serial";
+				compatible = "fsl,mpc885-scc-uart",
+				             "fsl,cpm1-scc-uart";
+				reg = <0xa20 0x20 0x3d00 0x80>;
+				interrupts = <29>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <0x40>;
+				linux,planetcore-label = "SCC2";
+			};
+
+			usb@a00 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,mpc885-usb",
+				             "fsl,cpm1-usb";
+				reg = <0xa00 0x18 0x1c00 0x80>;
+				interrupt-parent = <&CPM_PIC>;
+				interrupts = <30>;
+				fsl,cpm-command = <0000>;
+			};
+		};
+	};
+};
diff --git a/src/powerpc/fsl/b4420qds.dts b/src/powerpc/fsl/b4420qds.dts
new file mode 100644
index 000000000000..cd9203ceedc0
--- /dev/null
+++ b/src/powerpc/fsl/b4420qds.dts
@@ -0,0 +1,50 @@
+/*
+ * B4420DS Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+/include/ "b4420si-pre.dtsi"
+/include/ "b4qds.dtsi"
+
+/ {
+	model = "fsl,B4420QDS";
+	compatible = "fsl,B4420QDS";
+
+	ifc: localbus@ffe124000 {
+		board-control@3,0 {
+			compatible = "fsl,b4420qds-fpga", "fsl,fpga-qixis";
+		};
+	};
+
+};
+
+/include/ "b4420si-post.dtsi"
diff --git a/src/powerpc/fsl/b4420si-post.dtsi b/src/powerpc/fsl/b4420si-post.dtsi
new file mode 100644
index 000000000000..f996cced45e0
--- /dev/null
+++ b/src/powerpc/fsl/b4420si-post.dtsi
@@ -0,0 +1,97 @@
+/*
+ * B4420 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+/include/ "b4si-post.dtsi"
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,b4420-pcie", "fsl,qoriq-pcie-v2.4";
+};
+
+&dcsr {
+	dcsr-epu@0 {
+		compatible = "fsl,b4420-dcsr-epu", "fsl,dcsr-epu";
+	};
+	dcsr-npc {
+		compatible = "fsl,b4420-dcsr-cnpc", "fsl,dcsr-cnpc";
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,b4420-dcsr-dpaa", "fsl,dcsr-dpaa";
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,b4420-dcsr-ocn", "fsl,dcsr-ocn";
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,b4420-dcsr-nal", "fsl,dcsr-nal";
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,b4420-dcsr-rcpm", "fsl,dcsr-rcpm";
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,b4420-dcsr-snpc", "fsl,dcsr-snpc";
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,b4420-dcsr-snpc", "fsl,dcsr-snpc";
+	};
+	dcsr-cpu-sb-proxy@108000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x108000 0x1000 0x109000 0x1000>;
+	};
+};
+
+&soc {
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,b4420-l3-cache-controller", "cache";
+	};
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,b4420-device-config", "fsl,qoriq-device-config-2.0";
+	};
+
+	global-utilities@e1000 {
+		compatible = "fsl,b4420-clockgen", "fsl,b4-clockgen",
+			      "fsl,qoriq-clockgen-2.0";
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,b4420-rcpm", "fsl,qoriq-rcpm-2.0";
+	};
+
+	L2_1: l2-cache-controller@c20000 {
+		compatible = "fsl,b4420-l2-cache-controller";
+		reg = <0xc20000 0x40000>;
+		next-level-cache = <&cpc>;
+	};
+};
diff --git a/src/powerpc/fsl/b4420si-pre.dtsi b/src/powerpc/fsl/b4420si-pre.dtsi
new file mode 100644
index 000000000000..88d8423f8ac5
--- /dev/null
+++ b/src/powerpc/fsl/b4420si-pre.dtsi
@@ -0,0 +1,85 @@
+/*
+ * B4420 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+/dts-v1/;
+
+/include/ "e6500_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,B4420";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		usb0 = &usb0;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e6500@0 {
+			device_type = "cpu";
+			reg = <0 1>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu1: PowerPC,e6500@2 {
+			device_type = "cpu";
+			reg = <2 3>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/b4860qds.dts b/src/powerpc/fsl/b4860qds.dts
new file mode 100644
index 000000000000..a8bc419959ca
--- /dev/null
+++ b/src/powerpc/fsl/b4860qds.dts
@@ -0,0 +1,117 @@
+/*
+ * B4860DS Device Tree Source
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "b4860si-pre.dtsi"
+/include/ "b4qds.dtsi"
+
+/ {
+	model = "fsl,B4860QDS";
+	compatible = "fsl,B4860QDS";
+
+	aliases {
+		phy_sgmii_1e = &phy_sgmii_1e;
+		phy_sgmii_1f = &phy_sgmii_1f;
+		phy_xaui_slot1 = &phy_xaui_slot1;
+		phy_xaui_slot2 = &phy_xaui_slot2;
+	};
+
+	ifc: localbus@ffe124000 {
+		board-control@3,0 {
+			compatible = "fsl,b4860qds-fpga", "fsl,fpga-qixis";
+		};
+	};
+
+	soc@ffe000000 {
+		fman@400000 {
+			ethernet@e8000 {
+				phy-handle = <&phy_sgmii_1e>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@ea000 {
+				phy-handle = <&phy_sgmii_1f>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&phy_xaui_slot1>;
+				phy-connection-type = "xgmii";
+			};
+
+			ethernet@f2000 {
+				phy-handle = <&phy_xaui_slot2>;
+				phy-connection-type = "xgmii";
+			};
+
+			mdio@fc000 {
+				phy_sgmii_1e: ethernet-phy@1e {
+					reg = <0x1e>;
+					status = "disabled";
+				};
+
+				phy_sgmii_1f: ethernet-phy@1f {
+					reg = <0x1f>;
+					status = "disabled";
+				};
+			};
+
+			mdio@fd000 {
+				phy_xaui_slot1: xaui-phy@slot1 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x7>;
+					status = "disabled";
+				};
+
+				phy_xaui_slot2: xaui-phy@slot2 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x6>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+};
+
+/include/ "b4860si-post.dtsi"
diff --git a/src/powerpc/fsl/b4860si-post.dtsi b/src/powerpc/fsl/b4860si-post.dtsi
new file mode 100644
index 000000000000..868719821106
--- /dev/null
+++ b/src/powerpc/fsl/b4860si-post.dtsi
@@ -0,0 +1,284 @@
+/*
+ * B4860 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "b4si-post.dtsi"
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,b4860-pcie", "fsl,qoriq-pcie-v2.4";
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <16 2 1 20>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,iommu-parent = <&pamu0>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+	};
+};
+
+&dcsr {
+	dcsr-epu@0 {
+		compatible = "fsl,b4860-dcsr-epu", "fsl,dcsr-epu";
+	};
+	dcsr-npc {
+		compatible = "fsl,b4860-dcsr-cnpc", "fsl,dcsr-cnpc";
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,b4860-dcsr-dpaa", "fsl,dcsr-dpaa";
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,b4860-dcsr-ocn", "fsl,dcsr-ocn";
+	};
+	dcsr-ddr@13000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr2>;
+		reg = <0x13000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,b4860-dcsr-nal", "fsl,dcsr-nal";
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,b4860-dcsr-rcpm", "fsl,dcsr-rcpm";
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,b4860-dcsr-snpc", "fsl,dcsr-snpc";
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,b4860-dcsr-snpc", "fsl,dcsr-snpc";
+	};
+	dcsr-cpu-sb-proxy@108000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x108000 0x1000 0x109000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@110000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x110000 0x1000 0x111000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@118000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x118000 0x1000 0x119000 0x1000>;
+	};
+};
+
+&bportals {
+	bman-portal@38000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x38000 0x4000>, <0x100e000 0x1000>;
+		interrupts = <133 2 0 0>;
+	};
+	bman-portal@3c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x3c000 0x4000>, <0x100f000 0x1000>;
+		interrupts = <135 2 0 0>;
+	};
+	bman-portal@40000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x40000 0x4000>, <0x1010000 0x1000>;
+		interrupts = <137 2 0 0>;
+	};
+	bman-portal@44000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x44000 0x4000>, <0x1011000 0x1000>;
+		interrupts = <139 2 0 0>;
+	};
+	bman-portal@48000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x48000 0x4000>, <0x1012000 0x1000>;
+		interrupts = <141 2 0 0>;
+	};
+	bman-portal@4c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x4c000 0x4000>, <0x1013000 0x1000>;
+		interrupts = <143 2 0 0>;
+	};
+	bman-portal@50000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x50000 0x4000>, <0x1014000 0x1000>;
+		interrupts = <145 2 0 0>;
+	};
+	bman-portal@54000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x54000 0x4000>, <0x1015000 0x1000>;
+		interrupts = <147 2 0 0>;
+	};
+	bman-portal@58000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x58000 0x4000>, <0x1016000 0x1000>;
+		interrupts = <149 2 0 0>;
+	};
+	bman-portal@5c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x5c000 0x4000>, <0x1017000 0x1000>;
+		interrupts = <151 2 0 0>;
+	};
+	bman-portal@60000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x60000 0x4000>, <0x1018000 0x1000>;
+		interrupts = <153 2 0 0>;
+	};
+};
+
+&qportals {
+	qportal14: qman-portal@38000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x38000 0x4000>, <0x100e000 0x1000>;
+		interrupts = <132 0x2 0 0>;
+		cell-index = <0xe>;
+	};
+	qportal15: qman-portal@3c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x3c000 0x4000>, <0x100f000 0x1000>;
+		interrupts = <134 0x2 0 0>;
+		cell-index = <0xf>;
+	};
+	qportal16: qman-portal@40000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x40000 0x4000>, <0x1010000 0x1000>;
+		interrupts = <136 0x2 0 0>;
+		cell-index = <0x10>;
+	};
+	qportal17: qman-portal@44000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x44000 0x4000>, <0x1011000 0x1000>;
+		interrupts = <138 0x2 0 0>;
+		cell-index = <0x11>;
+	};
+	qportal18: qman-portal@48000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x48000 0x4000>, <0x1012000 0x1000>;
+		interrupts = <140 0x2 0 0>;
+		cell-index = <0x12>;
+	};
+	qportal19: qman-portal@4c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4c000 0x4000>, <0x1013000 0x1000>;
+		interrupts = <142 0x2 0 0>;
+		cell-index = <0x13>;
+	};
+	qportal20: qman-portal@50000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x50000 0x4000>, <0x1014000 0x1000>;
+		interrupts = <144 0x2 0 0>;
+		cell-index = <0x14>;
+	};
+	qportal21: qman-portal@54000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x54000 0x4000>, <0x1015000 0x1000>;
+		interrupts = <146 0x2 0 0>;
+		cell-index = <0x15>;
+	};
+	qportal22: qman-portal@58000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x58000 0x4000>, <0x1016000 0x1000>;
+		interrupts = <148 0x2 0 0>;
+		cell-index = <0x16>;
+	};
+	qportal23: qman-portal@5c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x5c000 0x4000>, <0x1017000 0x1000>;
+		interrupts = <150 0x2 0 0>;
+		cell-index = <0x17>;
+	};
+	qportal24: qman-portal@60000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x60000 0x4000>, <0x1018000 0x1000>;
+		interrupts = <152 0x2 0 0>;
+		cell-index = <0x18>;
+	};
+};
+
+&soc {
+	ddr2: memory-controller@9000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x9000 0x1000>;
+		interrupts = <16 2 1 9>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,b4860-l3-cache-controller", "cache";
+	};
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,b4860-device-config", "fsl,qoriq-device-config-2.0";
+	};
+
+	global-utilities@e1000 {
+		compatible = "fsl,b4860-clockgen", "fsl,b4-clockgen",
+			      "fsl,qoriq-clockgen-2.0";
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,b4860-rcpm", "fsl,qoriq-rcpm-2.0";
+	};
+
+/include/ "qoriq-fman3-0-1g-4.dtsi"
+/include/ "qoriq-fman3-0-1g-5.dtsi"
+/include/ "qoriq-fman3-0-10g-0.dtsi"
+/include/ "qoriq-fman3-0-10g-1.dtsi"
+	fman@400000 {
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@ea000 {
+		};
+
+		enet6: ethernet@f0000 {
+		};
+
+		enet7: ethernet@f2000 {
+		};
+	};
+
+	L2_1: l2-cache-controller@c20000 {
+		compatible = "fsl,b4860-l2-cache-controller";
+		reg = <0xc20000 0x40000>;
+		next-level-cache = <&cpc>;
+	};
+};
diff --git a/src/powerpc/fsl/b4860si-pre.dtsi b/src/powerpc/fsl/b4860si-pre.dtsi
new file mode 100644
index 000000000000..f3f968c51f4b
--- /dev/null
+++ b/src/powerpc/fsl/b4860si-pre.dtsi
@@ -0,0 +1,104 @@
+/*
+ * B4860 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e6500_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,B4860";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		usb0 = &usb0;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
+	};
+
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e6500@0 {
+			device_type = "cpu";
+			reg = <0 1>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu1: PowerPC,e6500@2 {
+			device_type = "cpu";
+			reg = <2 3>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu2: PowerPC,e6500@4 {
+			device_type = "cpu";
+			reg = <4 5>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu3: PowerPC,e6500@6 {
+			device_type = "cpu";
+			reg = <6 7>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/b4qds.dtsi b/src/powerpc/fsl/b4qds.dtsi
new file mode 100644
index 000000000000..3785ef826d07
--- /dev/null
+++ b/src/powerpc/fsl/b4qds.dtsi
@@ -0,0 +1,279 @@
+/*
+ * B4420DS Device Tree Source
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+/ {
+	model = "fsl,B4QDS";
+	compatible = "fsl,B4QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		phy_sgmii_10 = &phy_sgmii_10;
+		phy_sgmii_11 = &phy_sgmii_11;
+		phy_sgmii_1c = &phy_sgmii_1c;
+		phy_sgmii_1d = &phy_sgmii_1d;
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND DTB Image";
+			};
+
+			partition@200000 {
+				/* 10MB for Linux Kernel Image */
+				reg = <0x00200000 0x00A00000>;
+				label = "NAND Linux Kernel Image";
+			};
+
+			partition@c00000 {
+				/* 500MB for Root file System Image */
+				reg = <0x00c00000 0x1F400000>;
+				label = "NAND RFS Image";
+			};
+		};
+
+		board-control@3,0 {
+			compatible = "fsl,b4qds-fpga", "fsl,fpga-qixis";
+			reg = <3 0 0x300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01052000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "sst,sst25wf040", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+			};
+		};
+
+		sdhc@114000 {
+			/*Disabled as there is no sdhc connector on B4420QDS board*/
+			status = "disabled";
+		};
+
+		i2c@118000 {
+			mux@77 {
+				compatible = "nxp,pca9547";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					eeprom@50 {
+						compatible = "at24,24c64";
+						reg = <0x50>;
+					};
+					eeprom@51 {
+						compatible = "at24,24c256";
+						reg = <0x51>;
+					};
+					eeprom@53 {
+						compatible = "at24,24c256";
+						reg = <0x53>;
+					};
+					eeprom@57 {
+						compatible = "at24,24c256";
+						reg = <0x57>;
+					};
+					rtc@68 {
+						compatible = "dallas,ds3232";
+						reg = <0x68>;
+					};
+				};
+
+				i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+
+					ina220@40 {
+						compatible = "ti,ina220";
+						reg = <0x40>;
+						shunt-resistor = <1000>;
+					};
+				};
+
+				i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+
+					adt7461@4c {
+						compatible = "adi,adt7461";
+						reg = <0x4c>;
+					};
+				};
+			};
+		};
+
+		usb@210000 {
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				phy-handle = <&phy_sgmii_10>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy_sgmii_11>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_sgmii_1c>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy_sgmii_1d>;
+				phy-connection-type = "sgmii";
+			};
+
+			mdio@fc000 {
+				phy_sgmii_10: ethernet-phy@10 {
+					reg = <0x10>;
+				};
+
+				phy_sgmii_11: ethernet-phy@11 {
+					reg = <0x11>;
+				};
+
+				phy_sgmii_1c: ethernet-phy@1c {
+					reg = <0x1c>;
+					status = "disabled";
+				};
+
+				phy_sgmii_1d: ethernet-phy@1d {
+					reg = <0x1d>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "b4si-post.dtsi"
diff --git a/src/powerpc/fsl/b4si-post.dtsi b/src/powerpc/fsl/b4si-post.dtsi
new file mode 100644
index 000000000000..1b33f5157c8a
--- /dev/null
+++ b/src/powerpc/fsl/b4si-post.dtsi
@@ -0,0 +1,502 @@
+/*
+ * B4420 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <25 2 0 0>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,b4-pcie", "fsl,qoriq-pcie-v2.4";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <20 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		reg = <0 0 0 0 0>;
+		interrupts = <20 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,b4-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0
+			      94 2 0 0
+			      95 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,b4-dcsr-cnpc", "fsl,dcsr-cnpc";
+		reg = <0x1000 0x1000 0x1002000 0x10000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0x1A000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,b4-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,b4-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,b4-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,b4-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,b4-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x30000 0x1000 0x1022000 0x10000>;
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,b4-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x31000 0x1000 0x1042000 0x10000>;
+	};
+	dcsr-cpu-sb-proxy@100000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x100000 0x1000 0x101000 0x1000>;
+	};
+};
+
+&bportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	bman-portal@0 {
+		compatible = "fsl,bman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <105 2 0 0>;
+	};
+	bman-portal@4000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <107 2 0 0>;
+	};
+	bman-portal@8000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <109 2 0 0>;
+	};
+	bman-portal@c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <111 2 0 0>;
+	};
+	bman-portal@10000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <113 2 0 0>;
+	};
+	bman-portal@14000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <115 2 0 0>;
+	};
+	bman-portal@18000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x18000 0x4000>, <0x1006000 0x1000>;
+		interrupts = <117 2 0 0>;
+	};
+	bman-portal@1c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
+		interrupts = <119 2 0 0>;
+	};
+	bman-portal@20000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x20000 0x4000>, <0x1008000 0x1000>;
+		interrupts = <121 2 0 0>;
+	};
+	bman-portal@24000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x24000 0x4000>, <0x1009000 0x1000>;
+		interrupts = <123 2 0 0>;
+	};
+	bman-portal@28000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x28000 0x4000>, <0x100a000 0x1000>;
+		interrupts = <125 2 0 0>;
+	};
+	bman-portal@2c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x2c000 0x4000>, <0x100b000 0x1000>;
+		interrupts = <127 2 0 0>;
+	};
+	bman-portal@30000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x30000 0x4000>, <0x100c000 0x1000>;
+		interrupts = <129 2 0 0>;
+	};
+	bman-portal@34000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x34000 0x4000>, <0x100d000 0x1000>;
+		interrupts = <131 2 0 0>;
+	};
+};
+
+&qportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <104 0x2 0 0>;
+		cell-index = <0x0>;
+	};
+	qportal1: qman-portal@4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <106 0x2 0 0>;
+		cell-index = <0x1>;
+	};
+	qportal2: qman-portal@8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <108 0x2 0 0>;
+		cell-index = <0x2>;
+	};
+	qportal3: qman-portal@c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <110 0x2 0 0>;
+		cell-index = <0x3>;
+	};
+	qportal4: qman-portal@10000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <112 0x2 0 0>;
+		cell-index = <0x4>;
+	};
+	qportal5: qman-portal@14000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <114 0x2 0 0>;
+		cell-index = <0x5>;
+	};
+	qportal6: qman-portal@18000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x18000 0x4000>, <0x1006000 0x1000>;
+		interrupts = <116 0x2 0 0>;
+		cell-index = <0x6>;
+	};
+	qportal7: qman-portal@1c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
+		interrupts = <118 0x2 0 0>;
+		cell-index = <0x7>;
+	};
+	qportal8: qman-portal@20000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x20000 0x4000>, <0x1008000 0x1000>;
+		interrupts = <120 0x2 0 0>;
+		cell-index = <0x8>;
+	};
+	qportal9: qman-portal@24000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x24000 0x4000>, <0x1009000 0x1000>;
+		interrupts = <122 0x2 0 0>;
+		cell-index = <0x9>;
+	};
+	qportal10: qman-portal@28000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x28000 0x4000>, <0x100a000 0x1000>;
+		interrupts = <124 0x2 0 0>;
+		cell-index = <0xa>;
+	};
+	qportal11: qman-portal@2c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x2c000 0x4000>, <0x100b000 0x1000>;
+		interrupts = <126 0x2 0 0>;
+		cell-index = <0xb>;
+	};
+	qportal12: qman-portal@30000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x30000 0x4000>, <0x100c000 0x1000>;
+		interrupts = <128 0x2 0 0>;
+		cell-index = <0xc>;
+	};
+	qportal13: qman-portal@34000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x34000 0x4000>, <0x100d000 0x1000>;
+		interrupts = <130 0x2 0 0>;
+		cell-index = <0xd>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 2>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 8>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,b4-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000>;
+		interrupts = <16 2 1 4>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 0>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible =  "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x4000>;
+		fsl,portid-mapping = <0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 1>;
+
+
+		/* PCIe, DMA, SRIO */
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <8 1>;
+			fsl,secondary-cache-geometry = <32 2>;
+		};
+
+		/* AXI2, Maple */
+		pamu1: pamu@1000 {
+			reg = <0x1000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <32 2>;
+		};
+
+		/* Q/BMan */
+		pamu2: pamu@2000 {
+			reg = <0x2000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <32 2>;
+		};
+
+		/* AXI1, FMAN */
+		pamu3: pamu@3000 {
+			reg = <0x3000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <32 2>;
+		};
+	};
+
+/include/ "qoriq-mpic4.3.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,b4-device-config";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		fsl,liodn-bits = <12>;
+	};
+
+/include/ "qoriq-clockgen2.dtsi"
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,b4-clockgen", "fsl,qoriq-clockgen-2.0";
+		reg = <0xe1000 0x1000>;
+
+		mux0: mux0@0 {
+			#clock-cells = <0>;
+			reg = <0x0 0x4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+				<&pll1 0>, <&pll1 1>, <&pll1 2>;
+			clock-names = "pll0", "pll0-div2", "pll0-div4",
+				"pll1", "pll1-div2", "pll1-div4";
+			clock-output-names = "cmux0";
+		};
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,b4-rcpm", "fsl,qoriq-rcpm-2.0";
+		reg = <0xe2000 0x1000>;
+	};
+
+/include/ "elo3-dma-0.dtsi"
+	dma@100300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+	};
+
+/include/ "elo3-dma-1.dtsi"
+	dma@101300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+	};
+
+/include/ "qonverge-usb2-dr-0.dtsi"
+	usb0: usb@210000 {
+		compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+	};
+
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		sdhci,auto-cmd12;
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+	};
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-sec5.3-0.dtsi"
+
+/include/ "qoriq-qman3.dtsi"
+	qman: qman@318000 {
+		interrupts = <16 2 1 28>;
+	};
+
+/include/ "qoriq-bman1.dtsi"
+	bman: bman@31a000 {
+		interrupts = <16 2 1 29>;
+	};
+
+/include/ "qoriq-fman3-0.dtsi"
+/include/ "qoriq-fman3-0-1g-0.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+	fman@400000 {
+		interrupts = <96 2 0 0>, <16 2 1 30>;
+
+		muram@0 {
+			compatible = "fsl,fman-muram";
+			reg = <0x0 0x80000>;
+		};
+
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		mdio@fc000 {
+			interrupts = <100 1 0 0>;
+		};
+
+		mdio@fd000 {
+			interrupts = <101 1 0 0>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/bsc9131rdb.dts b/src/powerpc/fsl/bsc9131rdb.dts
new file mode 100644
index 000000000000..26366e6ff657
--- /dev/null
+++ b/src/powerpc/fsl/bsc9131rdb.dts
@@ -0,0 +1,34 @@
+/*
+ * BSC9131 RDB Device Tree Source
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "bsc9131si-pre.dtsi"
+
+/ {
+	model = "fsl,bsc9131rdb";
+	compatible = "fsl,bsc9131rdb";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_ifc: ifc: ifc@ff71e000 {
+		/* NAND Flash on board */
+		ranges = <0x0 0x0 0x0 0xff800000 0x00004000>;
+		reg = <0x0 0xff71e000 0x0 0x2000>;
+	};
+
+	board_soc: soc: soc@ff700000 {
+		ranges = <0x0 0x0 0xff700000 0x100000>;
+	};
+};
+
+/include/ "bsc9131rdb.dtsi"
+/include/ "bsc9131si-post.dtsi"
diff --git a/src/powerpc/fsl/bsc9131rdb.dtsi b/src/powerpc/fsl/bsc9131rdb.dtsi
new file mode 100644
index 000000000000..53f8b956340f
--- /dev/null
+++ b/src/powerpc/fsl/bsc9131rdb.dtsi
@@ -0,0 +1,104 @@
+/*
+ * BSC9131 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_ifc {
+
+	nand@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,ifc-nand";
+		reg = <0x0 0x0 0x4000>;
+
+	};
+};
+
+&board_soc {
+	/* BSC9131RDB does not have any device on i2c@3100 */
+	i2c@3100 {
+		status = "disabled";
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupts = <2 1 0 0>;
+			reg = <0x3>;
+		};
+	};
+
+	sdhc@2e000 {
+		status = "disabled";
+	};
+
+	ptp_clock@b0e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0xb0e00 0xb0>;
+		interrupts = <68 2 0 0 69 2 0 0>;
+		fsl,tclk-period	= <5>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0xcccccccd>;
+		fsl,tmr-fiper1	= <999999995>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <249999999>;
+	};
+
+	enet0: ethernet@b0000 {
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};
diff --git a/src/powerpc/fsl/bsc9131si-post.dtsi b/src/powerpc/fsl/bsc9131si-post.dtsi
new file mode 100644
index 000000000000..0c0efa94cfb4
--- /dev/null
+++ b/src/powerpc/fsl/bsc9131si-post.dtsi
@@ -0,0 +1,193 @@
+/*
+ * BSC9131 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <16 2 0 0 20 2 0 0>;
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,bsc9131-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,bsc9131-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,bsc9131-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+	i2c@3000 {
+		interrupts = <17 2 0 0>;
+	};
+
+/include/ "pq3-i2c-1.dtsi"
+	i2c@3100 {
+		interrupts = <17 2 0 0>;
+	};
+
+/include/ "pq3-duart-0.dtsi"
+	serial0: serial@4500 {
+		interrupts = <18 2 0 0>;
+	};
+
+	serial1: serial@4600 {
+		interrupts = <18 2 0 0 >;
+	};
+/include/ "pq3-espi-0.dtsi"
+	spi0: spi@7000 {
+		fsl,espi-num-chipselects = <1>;
+		interrupts = <22 0x2 0 0>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+	gpio-controller@f000 {
+		interrupts = <19 0x2 0 0>;
+		};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,bsc9131-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+
+dma@21300 {
+
+	dma-channel@0 {
+		interrupts = <62 2 0 0>;
+	};
+
+	dma-channel@80 {
+		interrupts = <63 2 0 0>;
+	};
+
+	dma-channel@100 {
+		interrupts = <64 2 0 0>;
+	};
+
+	dma-channel@180 {
+		interrupts = <65 2 0 0>;
+	};
+};
+
+/include/ "pq3-usb2-dr-0.dtsi"
+usb@22000 {
+	compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2";
+	interrupts = <40 0x2 0 0>;
+};
+
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		sdhci,auto-cmd12;
+		interrupts = <41 0x2 0 0>;
+	};
+
+/include/ "pq3-sec4.4-0.dtsi"
+crypto@30000 {
+	interrupts	 = <57 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		interrupts	 = <58 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		interrupts	 = <59 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		interrupts	 = <60 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		interrupts	 = <61 2 0 0>;
+	};
+};
+
+/include/ "pq3-mpic.dtsi"
+
+timer@41100 {
+	compatible = "fsl,mpic-v1.2-msgr", "fsl,mpic-msg";
+	reg = <0x41400 0x200>;
+	interrupts = <
+		0xb0 2
+		0xb1 2
+		0xb2 2
+		0xb3 2>;
+};
+
+/include/ "pq3-etsec2-0.dtsi"
+enet0: ethernet@b0000 {
+	queue-group@b0000 {
+		fsl,rx-bit-map = <0xff>;
+		fsl,tx-bit-map = <0xff>;
+		interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>;
+	};
+};
+
+/include/ "pq3-etsec2-1.dtsi"
+enet1: ethernet@b1000 {
+	queue-group@b1000 {
+		fsl,rx-bit-map = <0xff>;
+		fsl,tx-bit-map = <0xff>;
+		interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>;
+	};
+};
+
+global-utilities@e0000 {
+		compatible = "fsl,bsc9131-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/src/powerpc/fsl/bsc9131si-pre.dtsi b/src/powerpc/fsl/bsc9131si-pre.dtsi
new file mode 100644
index 000000000000..f6ec4a67560c
--- /dev/null
+++ b/src/powerpc/fsl/bsc9131si-pre.dtsi
@@ -0,0 +1,62 @@
+/*
+ * BSC9131 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,BSC9131";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,BSC9131@0 {
+			device_type = "cpu";
+			compatible = "fsl,e500v2";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/bsc9132qds.dts b/src/powerpc/fsl/bsc9132qds.dts
new file mode 100644
index 000000000000..56e6f1337e96
--- /dev/null
+++ b/src/powerpc/fsl/bsc9132qds.dts
@@ -0,0 +1,50 @@
+/*
+ * BSC9132 QDS Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "bsc9132si-pre.dtsi"
+
+/ {
+	model = "fsl,bsc9132qds";
+	compatible = "fsl,bsc9132qds";
+
+	memory {
+		device_type = "memory";
+	};
+
+	ifc: ifc@ff71e000 {
+		/* NOR, NAND Flash on board */
+		ranges = <0x0 0x0 0x0 0x88000000 0x08000000
+			  0x1 0x0 0x0 0xff800000 0x00010000>;
+		reg = <0x0 0xff71e000 0x0 0x2000>;
+	};
+
+	soc: soc@ff700000 {
+		ranges = <0x0 0x0 0xff700000 0x100000>;
+	};
+
+	pci0: pcie@ff70a000 {
+		reg = <0 0xff70a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xc0010000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x90000000
+				  0x2000000 0x0 0x90000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "bsc9132qds.dtsi"
+/include/ "bsc9132si-post.dtsi"
diff --git a/src/powerpc/fsl/bsc9132qds.dtsi b/src/powerpc/fsl/bsc9132qds.dtsi
new file mode 100644
index 000000000000..fead484a8180
--- /dev/null
+++ b/src/powerpc/fsl/bsc9132qds.dtsi
@@ -0,0 +1,113 @@
+/*
+ * BSC9132 QDS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,ifc-nand";
+		reg = <0x1 0x0 0x4000>;
+	};
+};
+
+&soc {
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <30000000>;
+		};
+	};
+
+	i2c@3000 {
+		fpga: fpga@66 {
+			compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
+			reg = <0x66>;
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			reg = <0x1>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x1f>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	ptp_clock@b0e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0xb0e00 0xb0>;
+		interrupts = <68 2 0 0 69 2 0 0>;
+		fsl,tclk-period	= <5>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0xcccccccd>;
+		fsl,tmr-fiper1	= <999999995>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <249999999>;
+	};
+
+	enet0: ethernet@b0000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi0>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy1>;
+		tbi-handle = <&tbi0>;
+		phy-connection-type = "sgmii";
+	};
+};
diff --git a/src/powerpc/fsl/bsc9132si-post.dtsi b/src/powerpc/fsl/bsc9132si-post.dtsi
new file mode 100644
index 000000000000..b5f071574e83
--- /dev/null
+++ b/src/powerpc/fsl/bsc9132si-post.dtsi
@@ -0,0 +1,213 @@
+/*
+ * BSC9132 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	/* FIXME: Test whether interrupts are split */
+	interrupts = <16 2 0 0 20 2 0 0>;
+};
+
+/* controller at 0xa000 */
+&pci0 {
+	compatible = "fsl,bsc9132-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x2 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x2 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x2 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x2 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,bsc9132-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,bsc9132-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,bsc9132-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 1 8>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+	i2c@3000 {
+		interrupts = <17 2 0 0>;
+	};
+
+/include/ "pq3-i2c-1.dtsi"
+	i2c@3100 {
+		interrupts = <17 2 0 0>;
+	};
+
+/include/ "pq3-duart-0.dtsi"
+	serial0: serial@4500 {
+		interrupts = <18 2 0 0>;
+	};
+
+	serial1: serial@4600 {
+		interrupts = <18 2 0 0 >;
+	};
+/include/ "pq3-espi-0.dtsi"
+	spi0: spi@7000 {
+		fsl,espi-num-chipselects = <1>;
+		interrupts = <22 0x2 0 0>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+	gpio-controller@f000 {
+		interrupts = <19 0x2 0 0>;
+		};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,bsc9132-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 1 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+
+dma@21300 {
+
+	dma-channel@0 {
+		interrupts = <62 2 0 0>;
+	};
+
+	dma-channel@80 {
+		interrupts = <63 2 0 0>;
+	};
+
+	dma-channel@100 {
+		interrupts = <64 2 0 0>;
+	};
+
+	dma-channel@180 {
+		interrupts = <65 2 0 0>;
+	};
+};
+
+/include/ "pq3-usb2-dr-0.dtsi"
+usb@22000 {
+	compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2";
+	interrupts = <40 0x2 0 0>;
+};
+
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		fsl,sdhci-auto-cmd12;
+		interrupts = <41 0x2 0 0>;
+	};
+
+/include/ "pq3-sec4.4-0.dtsi"
+crypto@30000 {
+	interrupts	 = <57 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		interrupts	 = <58 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		interrupts	 = <59 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		interrupts	 = <60 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		interrupts	 = <61 2 0 0>;
+	};
+};
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+enet0: ethernet@b0000 {
+	queue-group@b0000 {
+		fsl,rx-bit-map = <0xff>;
+		fsl,tx-bit-map = <0xff>;
+		interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>;
+	};
+};
+
+/include/ "pq3-etsec2-1.dtsi"
+enet1: ethernet@b1000 {
+	queue-group@b1000 {
+		fsl,rx-bit-map = <0xff>;
+		fsl,tx-bit-map = <0xff>;
+		interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>;
+	};
+};
+
+global-utilities@e0000 {
+		compatible = "fsl,bsc9132-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/src/powerpc/fsl/bsc9132si-pre.dtsi b/src/powerpc/fsl/bsc9132si-pre.dtsi
new file mode 100644
index 000000000000..90f7949fe312
--- /dev/null
+++ b/src/powerpc/fsl/bsc9132si-pre.dtsi
@@ -0,0 +1,67 @@
+/*
+ * BSC9132 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e500v2@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu1: PowerPC,e500v2@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/c293pcie.dts b/src/powerpc/fsl/c293pcie.dts
new file mode 100644
index 000000000000..66709788429d
--- /dev/null
+++ b/src/powerpc/fsl/c293pcie.dts
@@ -0,0 +1,224 @@
+/*
+ * C293 PCIE Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "c293si-pre.dtsi"
+
+/ {
+	model = "fsl,C293PCIE";
+	compatible = "fsl,C293PCIE";
+
+	memory {
+		device_type = "memory";
+	};
+
+	ifc: ifc@fffe1e000 {
+		reg = <0xf 0xffe1e000 0 0x2000>;
+		ranges = <0x0 0x0 0xf 0xec000000 0x04000000
+			  0x1 0x0 0xf 0xff800000 0x00010000
+			  0x2 0x0 0xf 0xffdf0000 0x00010000>;
+
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+&ifc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x4000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* 1MB for DTB Image */
+			reg = <0x0 0x00100000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@100000 {
+			/* 8 MB for Linux Kernel Image */
+			reg = <0x00100000 0x00800000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@900000 {
+			/* 53MB for rootfs */
+			reg = <0x00900000 0x03500000>;
+			label = "NOR Rootfs Image";
+		};
+
+		partition@3e00000 {
+			/* 1MB for blob encrypted key */
+			reg = <0x03e00000 0x00100000>;
+			label = "NOR blob encrypted key";
+		};
+
+		partition@3f00000 {
+			/* 512KB for u-boot Bootloader Image and evn */
+			reg = <0x03f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,ifc-nand";
+		reg = <0x1 0x0 0x10000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND DTB Image";
+		};
+
+		partition@200000 {
+			/* 16MB for Linux Kernel Image */
+			reg = <0x00200000 0x01000000>;
+			label = "NAND Linux Kernel Image";
+		};
+
+		partition@1200000 {
+			/* 4078MB for Root file System Image */
+			reg = <0x00600000 0xfee00000>;
+			label = "NAND RFS Image";
+		};
+	};
+
+	cpld@2,0 {
+		compatible = "fsl,c293pcie-cpld";
+		reg = <0x2 0x0 0x20>;
+	};
+};
+
+&soc {
+	i2c@3000 {
+		eeprom@50 {
+			compatible = "st,24c1024";
+			reg = <0x50>;
+		};
+
+		adt7461@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+
+			partition@0 {
+				/* 1MB for u-boot Bootloader Image */
+				/* 1MB for Environment */
+				reg = <0x0 0x00100000>;
+				label = "SPI Flash U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 512KB for DTB Image */
+				reg = <0x00100000 0x00080000>;
+				label = "SPI Flash DTB Image";
+			};
+
+			partition@180000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00180000 0x00400000>;
+				label = "SPI Flash Linux Kernel Image";
+			};
+
+			partition@580000 {
+				/* 10.5MB for RFS Image */
+				reg = <0x00580000 0x00a80000>;
+				label = "SPI Flash RFS Image";
+			};
+		};
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupts = <2 1 0 0>;
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupts = <2 1 0 0>;
+			reg = <0x2>;
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};
+/include/ "c293si-post.dtsi"
diff --git a/src/powerpc/fsl/c293si-post.dtsi b/src/powerpc/fsl/c293si-post.dtsi
new file mode 100644
index 000000000000..bd208320bff5
--- /dev/null
+++ b/src/powerpc/fsl/c293si-post.dtsi
@@ -0,0 +1,193 @@
+/*
+ * C293 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0xa000 */
+&pci0 {
+	compatible = "fsl,qoriq-pcie-v2.2", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,c293-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,c293-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+	spi0: spi@7000 {
+		fsl,espi-num-chipselects = <1>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,c293-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x80000>; // L2,512K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		compatible = "fsl,c293-esdhc", "fsl,esdhc";
+		sdhci,auto-cmd12;
+	};
+
+	crypto@80000 {
+/include/ "qoriq-sec6.0-0.dtsi"
+	};
+
+	crypto@80000 {
+		reg = <0x80000 0x20000>;
+		ranges = <0x0 0x80000 0x20000>;
+
+		jr@1000{
+			interrupts = <45 2 0 0>;
+		};
+		jr@2000{
+			interrupts = <57 2 0 0>;
+		};
+	};
+
+	crypto@a0000 {
+/include/ "qoriq-sec6.0-0.dtsi"
+	};
+
+	crypto@a0000 {
+		reg = <0xa0000 0x20000>;
+		ranges = <0x0 0xa0000 0x20000>;
+
+		jr@1000{
+			interrupts = <49 2 0 0>;
+		};
+		jr@2000{
+			interrupts = <50 2 0 0>;
+		};
+	};
+
+	crypto@c0000 {
+/include/ "qoriq-sec6.0-0.dtsi"
+	};
+
+	crypto@c0000 {
+		reg = <0xc0000 0x20000>;
+		ranges = <0x0 0xc0000 0x20000>;
+
+		jr@1000{
+			interrupts = <55 2 0 0>;
+		};
+		jr@2000{
+			interrupts = <56 2 0 0>;
+		};
+	};
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+	enet0: ethernet@b0000 {
+		queue-group@b0000 {
+			reg = <0x10000 0x1000>;
+			fsl,rx-bit-map = <0xff>;
+			fsl,tx-bit-map = <0xff>;
+		};
+	};
+
+/include/ "pq3-etsec2-1.dtsi"
+	enet1: ethernet@b1000 {
+		queue-group@b1000 {
+			reg = <0x11000 0x1000>;
+			fsl,rx-bit-map = <0xff>;
+			fsl,tx-bit-map = <0xff>;
+		};
+	};
+
+	global-utilities@e0000 {
+		compatible = "fsl,c293-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/src/powerpc/fsl/c293si-pre.dtsi b/src/powerpc/fsl/c293si-pre.dtsi
new file mode 100644
index 000000000000..065049d76245
--- /dev/null
+++ b/src/powerpc/fsl/c293si-pre.dtsi
@@ -0,0 +1,63 @@
+/*
+ * C293 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,C293";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,e500v2@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/cyrus_p5020.dts b/src/powerpc/fsl/cyrus_p5020.dts
new file mode 100644
index 000000000000..c6033909db60
--- /dev/null
+++ b/src/powerpc/fsl/cyrus_p5020.dts
@@ -0,0 +1,155 @@
+/*
+ * Cyrus 5020 Device Tree Source, based on p5020ds.dts
+ *
+ * Copyright 2015 Andy Fleming
+ *
+ * p5020ds.dts copyright:
+ * Copyright 2010 - 2014 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p5020si-pre.dtsi"
+
+/ {
+	model = "varisys,CYRUS";
+	compatible = "varisys,CYRUS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x200000>;
+	};
+
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+		};
+
+		i2c@118100 {
+		};
+
+		i2c@119100 {
+			rtc@6f {
+				compatible = "microchip,mcp7941x";
+				reg = <0x6f>;
+			};
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xffa00000 0x00040000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		reg = <0xf 0xfe201000 0 0x1000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe202000 {
+		reg = <0xf 0xfe202000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe203000 {
+		reg = <0xf 0xfe203000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "p5020si-post.dtsi"
diff --git a/src/powerpc/fsl/e500mc_power_isa.dtsi b/src/powerpc/fsl/e500mc_power_isa.dtsi
new file mode 100644
index 000000000000..ea145c91cfbd
--- /dev/null
+++ b/src/powerpc/fsl/e500mc_power_isa.dtsi
@@ -0,0 +1,59 @@
+/*
+ * e500mc Power ISA Device Tree Source (include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	cpus {
+		power-isa-version = "2.06";
+		power-isa-b;		// Base
+		power-isa-e;		// Embedded
+		power-isa-atb;		// Alternate Time Base
+		power-isa-cs;		// Cache Specification
+		power-isa-ds;		// Decorated Storage
+		power-isa-e.ed;		// Embedded.Enhanced Debug
+		power-isa-e.pd;		// Embedded.External PID
+		power-isa-e.hv;		// Embedded.Hypervisor
+		power-isa-e.le;		// Embedded.Little-Endian
+		power-isa-e.pm;		// Embedded.Performance Monitor
+		power-isa-e.pc;		// Embedded.Processor Control
+		power-isa-ecl;		// Embedded Cache Locking
+		power-isa-exp;		// External Proxy
+		power-isa-fp;		// Floating Point
+		power-isa-fp.r;		// Floating Point.Record
+		power-isa-mmc;		// Memory Coherence
+		power-isa-scpm;		// Store Conditional Page Mobility
+		power-isa-wt;		// Wait
+		fsl,eref-deo;		// Data Cache Extended Operations
+		mmu-type = "power-embedded";
+	};
+};
diff --git a/src/powerpc/fsl/e500v2_power_isa.dtsi b/src/powerpc/fsl/e500v2_power_isa.dtsi
new file mode 100644
index 000000000000..f4928144d2c8
--- /dev/null
+++ b/src/powerpc/fsl/e500v2_power_isa.dtsi
@@ -0,0 +1,52 @@
+/*
+ * e500v2 Power ISA Device Tree Source (include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	cpus {
+		power-isa-version = "2.03";
+		power-isa-b;		// Base
+		power-isa-e;		// Embedded
+		power-isa-atb;		// Alternate Time Base
+		power-isa-cs;		// Cache Specification
+		power-isa-e.le;		// Embedded.Little-Endian
+		power-isa-e.pm;		// Embedded.Performance Monitor
+		power-isa-ecl;		// Embedded Cache Locking
+		power-isa-mmc;		// Memory Coherence
+		power-isa-sp;		// Signal Processing Engine
+		power-isa-sp.fd;	// SPE.Embedded Float Scalar Double
+		power-isa-sp.fs;	// SPE.Embedded Float Scalar Single
+		power-isa-sp.fv;	// SPE.Embedded Float Vector
+		mmu-type = "power-embedded";
+	};
+};
diff --git a/src/powerpc/fsl/e5500_power_isa.dtsi b/src/powerpc/fsl/e5500_power_isa.dtsi
new file mode 100644
index 000000000000..c254c981ae87
--- /dev/null
+++ b/src/powerpc/fsl/e5500_power_isa.dtsi
@@ -0,0 +1,60 @@
+/*
+ * e5500 Power ISA Device Tree Source (include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	cpus {
+		power-isa-version = "2.06";
+		power-isa-b;		// Base
+		power-isa-e;		// Embedded
+		power-isa-atb;		// Alternate Time Base
+		power-isa-cs;		// Cache Specification
+		power-isa-ds;		// Decorated Storage
+		power-isa-e.ed;		// Embedded.Enhanced Debug
+		power-isa-e.pd;		// Embedded.External PID
+		power-isa-e.hv;		// Embedded.Hypervisor
+		power-isa-e.le;		// Embedded.Little-Endian
+		power-isa-e.pm;		// Embedded.Performance Monitor
+		power-isa-e.pc;		// Embedded.Processor Control
+		power-isa-ecl;		// Embedded Cache Locking
+		power-isa-exp;		// External Proxy
+		power-isa-fp;		// Floating Point
+		power-isa-fp.r;		// Floating Point.Record
+		power-isa-mmc;		// Memory Coherence
+		power-isa-scpm;		// Store Conditional Page Mobility
+		power-isa-wt;		// Wait
+		power-isa-64;		// 64-bit
+		fsl,eref-deo;		// Data Cache Extended Operations
+		mmu-type = "power-embedded";
+	};
+};
diff --git a/src/powerpc/fsl/e6500_power_isa.dtsi b/src/powerpc/fsl/e6500_power_isa.dtsi
new file mode 100644
index 000000000000..a912dbeff359
--- /dev/null
+++ b/src/powerpc/fsl/e6500_power_isa.dtsi
@@ -0,0 +1,65 @@
+/*
+ * e6500 Power ISA Device Tree Source (include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	cpus {
+		power-isa-version = "2.06";
+		power-isa-b;		// Base
+		power-isa-e;		// Embedded
+		power-isa-atb;		// Alternate Time Base
+		power-isa-cs;		// Cache Specification
+		power-isa-ds;		// Decorated Storage
+		power-isa-e.ed;		// Embedded.Enhanced Debug
+		power-isa-e.pd;		// Embedded.External PID
+		power-isa-e.hv;		// Embedded.Hypervisor
+		power-isa-e.le;		// Embedded.Little-Endian
+		power-isa-e.pm;		// Embedded.Performance Monitor
+		power-isa-e.pc;		// Embedded.Processor Control
+		power-isa-ecl;		// Embedded Cache Locking
+		power-isa-exp;		// External Proxy
+		power-isa-fp;		// Floating Point
+		power-isa-fp.r;		// Floating Point.Record
+		power-isa-mmc;		// Memory Coherence
+		power-isa-scpm;		// Store Conditional Page Mobility
+		power-isa-wt;		// Wait
+		power-isa-64;		// 64-bit
+		power-isa-e.pt;		// Embedded.Page Table
+		power-isa-e.hv.lrat;	// Embedded.Hypervisor.LRAT
+		power-isa-e.em;		// Embedded Multi-Threading
+		power-isa-v;		// Vector (AltiVec)
+		fsl,eref-er;		// Enhanced Reservations (Load and Reserve and Store Cond.)
+		fsl,eref-deo;		// Data Cache Extended Operations
+		mmu-type = "power-embedded";
+	};
+};
diff --git a/src/powerpc/fsl/elo3-dma-0.dtsi b/src/powerpc/fsl/elo3-dma-0.dtsi
new file mode 100644
index 000000000000..3c210e0d5201
--- /dev/null
+++ b/src/powerpc/fsl/elo3-dma-0.dtsi
@@ -0,0 +1,82 @@
+/*
+ * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x100000 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma0: dma@100300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,elo3-dma";
+	reg = <0x100300 0x4>,
+	      <0x100600 0x4>;
+	ranges = <0x0 0x100100 0x500>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		interrupts = <28 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		interrupts = <29 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		interrupts = <30 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		interrupts = <31 2 0 0>;
+	};
+	dma-channel@300 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x300 0x80>;
+		interrupts = <76 2 0 0>;
+	};
+	dma-channel@380 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x380 0x80>;
+		interrupts = <77 2 0 0>;
+	};
+	dma-channel@400 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x400 0x80>;
+		interrupts = <78 2 0 0>;
+	};
+	dma-channel@480 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x480 0x80>;
+		interrupts = <79 2 0 0>;
+	};
+};
diff --git a/src/powerpc/fsl/elo3-dma-1.dtsi b/src/powerpc/fsl/elo3-dma-1.dtsi
new file mode 100644
index 000000000000..cccf3bb38224
--- /dev/null
+++ b/src/powerpc/fsl/elo3-dma-1.dtsi
@@ -0,0 +1,82 @@
+/*
+ * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x101000 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma1: dma@101300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,elo3-dma";
+	reg = <0x101300 0x4>,
+	      <0x101600 0x4>;
+	ranges = <0x0 0x101100 0x500>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		interrupts = <32 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		interrupts = <33 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		interrupts = <34 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		interrupts = <35 2 0 0>;
+	};
+	dma-channel@300 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x300 0x80>;
+		interrupts = <80 2 0 0>;
+	};
+	dma-channel@380 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x380 0x80>;
+		interrupts = <81 2 0 0>;
+	};
+	dma-channel@400 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x400 0x80>;
+		interrupts = <82 2 0 0>;
+	};
+	dma-channel@480 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x480 0x80>;
+		interrupts = <83 2 0 0>;
+	};
+};
diff --git a/src/powerpc/fsl/elo3-dma-2.dtsi b/src/powerpc/fsl/elo3-dma-2.dtsi
new file mode 100644
index 000000000000..d3cc8d0f7c25
--- /dev/null
+++ b/src/powerpc/fsl/elo3-dma-2.dtsi
@@ -0,0 +1,82 @@
+/*
+ * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x102300 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma2: dma@102300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,elo3-dma";
+	reg = <0x102300 0x4>,
+	      <0x102600 0x4>;
+	ranges = <0x0 0x102100 0x500>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		interrupts = <464 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		interrupts = <465 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		interrupts = <466 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		interrupts = <467 2 0 0>;
+	};
+	dma-channel@300 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x300 0x80>;
+		interrupts = <468 2 0 0>;
+	};
+	dma-channel@380 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x380 0x80>;
+		interrupts = <469 2 0 0>;
+	};
+	dma-channel@400 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x400 0x80>;
+		interrupts = <470 2 0 0>;
+	};
+	dma-channel@480 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x480 0x80>;
+		interrupts = <471 2 0 0>;
+	};
+};
diff --git a/src/powerpc/fsl/ge_imp3a.dts b/src/powerpc/fsl/ge_imp3a.dts
new file mode 100644
index 000000000000..a2bb47f4edbe
--- /dev/null
+++ b/src/powerpc/fsl/ge_imp3a.dts
@@ -0,0 +1,255 @@
+/*
+ * GE IMP3A Device Tree Source
+ *
+ * Copyright 2010-2011 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Based on: P2020 DS Device Tree Source
+ * Copyright 2009 Freescale Semiconductor Inc.
+ */
+
+/include/ "p2020si-pre.dtsi"
+
+/ {
+	model = "GE_IMP3A";
+	compatible = "ge,imp3a";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fef05000 {
+		reg = <0 0xfef05000 0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xff000000 0x01000000
+			  0x1 0x0 0x0 0xe0000000 0x08000000
+			  0x2 0x0 0x0 0xe8000000 0x08000000
+			  0x3 0x0 0x0 0xfc100000 0x00020000
+			  0x4 0x0 0x0 0xfc000000 0x00008000
+			  0x5 0x0 0x0 0xfc008000 0x00008000
+			  0x6 0x0 0x0 0xfee00000 0x00040000
+			  0x7 0x0 0x0 0xfee80000 0x00040000>;
+
+		/* nor@0,0 is a mirror of part of the memory in nor@1,0
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "ge,imp3a-firmware-mirror", "cfi-flash";
+			reg = <0x0 0x0 0x1000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x1000000>;
+				read-only;
+			};
+		};
+		*/
+
+		nor@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "ge,imp3a-paged-flash", "cfi-flash";
+			reg = <0x1 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "user";
+				reg = <0x0 0x7800000>;
+			};
+
+			partition@7800000 {
+				label = "firmware";
+				reg = <0x7800000 0x800000>;
+				read-only;
+			};
+		};
+
+		nvram@3,0 {
+			device_type = "nvram";
+			compatible = "simtek,stk14ca8";
+			reg = <0x3 0x0 0x20000>;
+		};
+
+		fpga@4,0 {
+			compatible = "ge,imp3a-fpga-regs";
+			reg = <0x4 0x0 0x20>;
+		};
+
+		gef_pic: pic@4,20 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			device_type = "interrupt-controller";
+			compatible = "ge,imp3a-fpga-pic", "gef,fpga-pic-1.00";
+			reg = <0x4 0x20 0x20>;
+			interrupts = <6 7 0 0>;
+		};
+
+		gef_gpio: gpio@4,400 {
+			#gpio-cells = <2>;
+			compatible = "ge,imp3a-gpio";
+			reg = <0x4 0x400 0x24>;
+			gpio-controller;
+		};
+
+		wdt@4,800 {
+			compatible = "ge,imp3a-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
+			reg = <0x4 0x800 0x8>;
+			interrupts = <10 4>;
+			interrupt-parent = <&gef_pic>;
+		};
+
+		/* Second watchdog available, driver currently supports one.
+		wdt@4,808 {
+			compatible = "gef,imp3a-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
+			reg = <0x4 0x808 0x8>;
+			interrupts = <9 4>;
+			interrupt-parent = <&gef_pic>;
+		};
+		*/
+
+		nand@6,0 {
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x6 0x0 0x40000>;
+		};
+
+		nand@7,0 {
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x7 0x0 0x40000>;
+		};
+	};
+
+	soc: soc@fef00000 {
+		ranges = <0x0 0 0xfef00000 0x100000>;
+
+		i2c@3000 {
+			hwmon@48 {
+				compatible = "national,lm92";
+				reg = <0x48>;
+			};
+
+			hwmon@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			rtc@51 {
+				compatible = "epson,rx8581";
+				reg = <0x51>;
+			};
+
+			eti@6b {
+				compatible = "dallas,ds1682";
+				reg = <0x6b>;
+			};
+		};
+
+		usb@22000 {
+			phy_type = "ulpi";
+			dr_mode = "host";
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0xc 0x4>;
+				reg = <0x1>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0xb 0x4>;
+				reg = <0x2>;
+			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@26520 {
+			status = "disabled";
+		};
+
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "gmii";
+		};
+
+		enet1: ethernet@25000 {
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "gmii";
+		};
+
+		enet2: ethernet@26000 {
+			status = "disabled";
+		};
+	};
+
+	pci0: pcie@fef08000 {
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xfe020000 0x0 0x10000>;
+		reg = <0 0xfef08000 0 0x1000>;
+
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	pci1: pcie@fef09000 {
+		reg = <0 0xfef09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xfe010000 0x0 0x10000>;
+
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+
+	};
+
+	pci2: pcie@fef0a000 {
+		reg = <0 0xfef0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xfe000000 0x0 0x10000>;
+
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+};
+
+/include/ "p2020si-post.dtsi"
diff --git a/src/powerpc/fsl/gef_ppc9a.dts b/src/powerpc/fsl/gef_ppc9a.dts
new file mode 100644
index 000000000000..c88d4ef9e4f7
--- /dev/null
+++ b/src/powerpc/fsl/gef_ppc9a.dts
@@ -0,0 +1,220 @@
+/*
+ * GE PPC9A Device Tree Source
+ *
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Based on: SBS CM6 Device Tree Source
+ * Copyright 2007 SBS Technologies GmbH & Co. KG
+ * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ */
+
+/*
+ * Compiled with dtc -I dts -O dtb -o gef_ppc9a.dtb gef_ppc9a.dts
+ */
+
+/include/ "mpc8641si-pre.dtsi"
+
+/ {
+	model = "GEF_PPC9A";
+	compatible = "gef,ppc9a";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;	// set by uboot
+	};
+
+	lbc: localbus@fef05000 {
+		reg = <0xfef05000 0x1000>;
+
+		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
+			  1 0 0xe8000000 0x08000000	// Paged Flash 0
+			  2 0 0xe0000000 0x08000000	// Paged Flash 1
+			  3 0 0xfc100000 0x00020000	// NVRAM
+			  4 0 0xfc000000 0x00008000	// FPGA
+			  5 0 0xfc008000 0x00008000	// AFIX FPGA
+			  6 0 0xfd000000 0x00800000	// IO FPGA (8-bit)
+			  7 0 0xfd800000 0x00800000>;	// IO FPGA (32-bit)
+
+		/* flash@0,0 is a mirror of part of the memory in flash@1,0
+		flash@0,0 {
+			compatible = "gef,ppc9a-firmware-mirror", "cfi-flash";
+			reg = <0x0 0x0 0x1000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x1000000>;
+				read-only;
+			};
+		};
+		*/
+
+		flash@1,0 {
+			compatible = "gef,ppc9a-paged-flash", "cfi-flash";
+			reg = <0x1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "user";
+				reg = <0x0 0x7800000>;
+			};
+			partition@7800000 {
+				label = "firmware";
+				reg = <0x7800000 0x800000>;
+				read-only;
+			};
+		};
+
+		nvram@3,0 {
+			device_type = "nvram";
+			compatible = "simtek,stk14ca8";
+			reg = <0x3 0x0 0x20000>;
+		};
+
+		fpga@4,0 {
+			compatible = "gef,ppc9a-fpga-regs";
+			reg = <0x4 0x0 0x40>;
+		};
+
+		wdt@4,2000 {
+			compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
+			reg = <0x4 0x2000 0x8>;
+			interrupts = <0x1a 0x4>;
+			interrupt-parent = <&gef_pic>;
+		};
+		/* Second watchdog available, driver currently supports one.
+		wdt@4,2010 {
+			compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
+			reg = <0x4 0x2010 0x8>;
+			interrupts = <0x1b 0x4>;
+			interrupt-parent = <&gef_pic>;
+		};
+		*/
+		gef_pic: pic@4,4000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "gef,ppc9a-fpga-pic", "gef,fpga-pic-1.00";
+			reg = <0x4 0x4000 0x20>;
+			interrupts = <0x8 0x9 0 0>;
+
+		};
+		gef_gpio: gpio@7,14000 {
+			#gpio-cells = <2>;
+			compatible = "gef,ppc9a-gpio", "gef,sbc610-gpio";
+			reg = <0x7 0x14000 0x24>;
+			gpio-controller;
+		};
+	};
+
+	soc: soc@fef00000 {
+		ranges = <0x0 0xfef00000 0x00100000>;
+
+		i2c@3000 {
+			hwmon@48 {
+				compatible = "national,lm92";
+				reg = <0x48>;
+			};
+
+			hwmon@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			rtc@51 {
+				compatible = "epson,rx8581";
+				reg = <0x00000051>;
+			};
+
+			eti@6b {
+				compatible = "dallas,ds1682";
+				reg = <0x6b>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "gmii";
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0x9 0x4>;
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0x8 0x4>;
+				reg = <3>;
+			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet1: ethernet@26000 {
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "gmii";
+		};
+
+		mdio@26520 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet2: ethernet@25000 {
+			status = "disabled";
+		};
+
+		mdio@25520 {
+			status = "disabled";
+		};
+
+		enet3: ethernet@27000 {
+			status = "disabled";
+		};
+
+		mdio@27520 {
+			status = "disabled";
+		};
+	};
+
+	pci0: pcie@fef08000 {
+		reg = <0xfef08000 0x1000>;
+		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
+			  0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
+
+		pcie@0 {
+			ranges = <0x02000000 0x0 0x80000000
+				  0x02000000 0x0 0x80000000
+				  0x0 0x40000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00400000>;
+		};
+	};
+
+	pci1: pcie@fef09000 {
+		status = "disabled";
+	};
+};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/src/powerpc/fsl/gef_sbc310.dts b/src/powerpc/fsl/gef_sbc310.dts
new file mode 100644
index 000000000000..838515798cce
--- /dev/null
+++ b/src/powerpc/fsl/gef_sbc310.dts
@@ -0,0 +1,238 @@
+/*
+ * GE SBC310 Device Tree Source
+ *
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Based on: SBS CM6 Device Tree Source
+ * Copyright 2007 SBS Technologies GmbH & Co. KG
+ * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ */
+
+/*
+ * Compiled with dtc -I dts -O dtb -o gef_sbc310.dtb gef_sbc310.dts
+ */
+
+/include/ "mpc8641si-pre.dtsi"
+
+/ {
+	model = "GEF_SBC310";
+	compatible = "gef,sbc310";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;	// set by uboot
+	};
+
+	lbc: localbus@fef05000 {
+		reg = <0xfef05000 0x1000>;
+
+		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
+			  1 0 0xe0000000 0x08000000	// Paged Flash 0
+			  2 0 0xe8000000 0x08000000	// Paged Flash 1
+			  3 0 0xfc100000 0x00020000	// NVRAM
+			  4 0 0xfc000000 0x00010000>;	// FPGA
+
+		/* flash@0,0 is a mirror of part of the memory in flash@1,0
+		flash@0,0 {
+			compatible = "gef,sbc310-firmware-mirror", "cfi-flash";
+			reg = <0x0 0x0 0x01000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x01000000>;
+				read-only;
+			};
+		};
+		*/
+
+		flash@1,0 {
+			compatible = "gef,sbc310-paged-flash", "cfi-flash";
+			reg = <0x1 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "user";
+				reg = <0x0 0x7800000>;
+			};
+			partition@7800000 {
+				label = "firmware";
+				reg = <0x7800000 0x800000>;
+				read-only;
+			};
+		};
+
+		nvram@3,0 {
+			device_type = "nvram";
+			compatible = "simtek,stk14ca8";
+			reg = <0x3 0x0 0x20000>;
+		};
+
+		fpga@4,0 {
+			compatible = "gef,fpga-regs";
+			reg = <0x4 0x0 0x40>;
+		};
+
+		wdt@4,2000 {
+			compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
+			reg = <0x4 0x2000 0x8>;
+			interrupts = <0x1a 0x4>;
+			interrupt-parent = <&gef_pic>;
+		};
+/*
+		wdt@4,2010 {
+			compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
+			reg = <0x4 0x2010 0x8>;
+			interrupts = <0x1b 0x4>;
+			interrupt-parent = <&gef_pic>;
+		};
+*/
+		gef_pic: pic@4,4000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "gef,sbc310-fpga-pic", "gef,fpga-pic";
+			reg = <0x4 0x4000 0x20>;
+			interrupts = <0x8 0x9 0 0>;
+
+		};
+		gef_gpio: gpio@4,8000 {
+			#gpio-cells = <2>;
+			compatible = "gef,sbc310-gpio";
+			reg = <0x4 0x8000 0x24>;
+			gpio-controller;
+		};
+	};
+
+	soc: soc@fef00000 {
+		ranges = <0x0 0xfef00000 0x00100000>;
+
+		i2c@3000 {
+			rtc@51 {
+				compatible = "epson,rx8581";
+				reg = <0x00000051>;
+			};
+		};
+
+		i2c@3100 {
+			hwmon@48 {
+				compatible = "national,lm92";
+				reg = <0x48>;
+			};
+
+			hwmon@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			eti@6b {
+				compatible = "dallas,ds1682";
+				reg = <0x6b>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "gmii";
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0x9 0x4>;
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0x8 0x4>;
+				reg = <3>;
+			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet1: ethernet@26000 {
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "gmii";
+		};
+
+		mdio@26520 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet2: ethernet@25000 {
+			status = "disabled";
+		};
+
+		mdio@25520 {
+			status = "disabled";
+		};
+
+		enet3: ethernet@27000 {
+			status = "disabled";
+		};
+
+		mdio@27520 {
+			status = "disabled";
+		};
+	};
+
+	pci0: pcie@fef08000 {
+		reg = <0xfef08000 0x1000>;
+		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
+			  0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+		interrupt-map = <
+			0x0000 0x0 0x0 0x1 &mpic 0x0 0x2
+			0x0000 0x0 0x0 0x2 &mpic 0x1 0x2
+			0x0000 0x0 0x0 0x3 &mpic 0x2 0x2
+			0x0000 0x0 0x0 0x4 &mpic 0x3 0x2
+		>;
+
+		pcie@0 {
+			ranges = <0x02000000 0x0 0x80000000
+				  0x02000000 0x0 0x80000000
+				  0x0 0x40000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00400000>;
+		};
+	};
+
+	pci1: pcie@fef09000 {
+		reg = <0xfef09000 0x1000>;
+		ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xfe400000 0x0 0x00400000>;
+
+		pcie@0 {
+			ranges = <0x02000000 0x0 0xc0000000
+				  0x02000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00400000>;
+		};
+	};
+};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/src/powerpc/fsl/gef_sbc610.dts b/src/powerpc/fsl/gef_sbc610.dts
new file mode 100644
index 000000000000..ff423ab424f2
--- /dev/null
+++ b/src/powerpc/fsl/gef_sbc610.dts
@@ -0,0 +1,218 @@
+/*
+ * GE SBC610 Device Tree Source
+ *
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Based on: SBS CM6 Device Tree Source
+ * Copyright 2007 SBS Technologies GmbH & Co. KG
+ * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ */
+
+/*
+ * Compiled with dtc -I dts -O dtb -o gef_sbc610.dtb gef_sbc610.dts
+ */
+
+/include/ "mpc8641si-pre.dtsi"
+
+/ {
+	model = "GEF_SBC610";
+	compatible = "gef,sbc610";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;	// set by uboot
+	};
+
+	lbc: localbus@fef05000 {
+		reg = <0xfef05000 0x1000>;
+
+		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
+			  1 0 0xe8000000 0x08000000	// Paged Flash 0
+			  2 0 0xe0000000 0x08000000	// Paged Flash 1
+			  3 0 0xfc100000 0x00020000	// NVRAM
+			  4 0 0xfc000000 0x00008000	// FPGA
+			  5 0 0xfc008000 0x00008000	// AFIX FPGA
+			  6 0 0xfd000000 0x00800000	// IO FPGA (8-bit)
+			  7 0 0xfd800000 0x00800000>;	// IO FPGA (32-bit)
+
+		/* flash@0,0 is a mirror of part of the memory in flash@1,0
+		flash@0,0 {
+			compatible = "gef,sbc610-firmware-mirror", "cfi-flash";
+			reg = <0x0 0x0 0x1000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x1000000>;
+				read-only;
+			};
+		};
+		*/
+
+		flash@1,0 {
+			compatible = "gef,sbc610-paged-flash", "cfi-flash";
+			reg = <0x1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "user";
+				reg = <0x0 0x7800000>;
+			};
+			partition@7800000 {
+				label = "firmware";
+				reg = <0x7800000 0x800000>;
+				read-only;
+			};
+		};
+
+		nvram@3,0 {
+			device_type = "nvram";
+			compatible = "simtek,stk14ca8";
+			reg = <0x3 0x0 0x20000>;
+		};
+
+		fpga@4,0 {
+			compatible = "gef,fpga-regs";
+			reg = <0x4 0x0 0x40>;
+		};
+
+		wdt@4,2000 {
+			compatible = "gef,fpga-wdt";
+			reg = <0x4 0x2000 0x8>;
+			interrupts = <0x1a 0x4>;
+			interrupt-parent = <&gef_pic>;
+		};
+		/* Second watchdog available, driver currently supports one.
+		wdt@4,2010 {
+			compatible = "gef,fpga-wdt";
+			reg = <0x4 0x2010 0x8>;
+			interrupts = <0x1b 0x4>;
+			interrupt-parent = <&gef_pic>;
+		};
+		*/
+		gef_pic: pic@4,4000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "gef,fpga-pic";
+			reg = <0x4 0x4000 0x20>;
+			interrupts = <0x8 0x9 0 0>;
+
+		};
+		gef_gpio: gpio@7,14000 {
+			#gpio-cells = <2>;
+			compatible = "gef,sbc610-gpio";
+			reg = <0x7 0x14000 0x24>;
+			gpio-controller;
+		};
+	};
+
+	soc: soc@fef00000 {
+		ranges = <0x0 0xfef00000 0x00100000>;
+
+		i2c@3000 {
+			hwmon@48 {
+				compatible = "national,lm92";
+				reg = <0x48>;
+			};
+
+			hwmon@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			rtc@51 {
+				compatible = "epson,rx8581";
+				reg = <0x00000051>;
+			};
+
+			eti@6b {
+				compatible = "dallas,ds1682";
+				reg = <0x6b>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "gmii";
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0x9 0x4>;
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0x8 0x4>;
+				reg = <3>;
+			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet1: ethernet@26000 {
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "gmii";
+		};
+
+		mdio@26520 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet2: ethernet@25000 {
+			status = "disabled";
+		};
+
+		mdio@25520 {
+			status = "disabled";
+		};
+
+		enet3: ethernet@27000 {
+			status = "disabled";
+		};
+
+		mdio@27520 {
+			status = "disabled";
+		};
+	};
+
+	pci0: pcie@fef08000 {
+		reg = <0xfef08000 0x1000>;
+		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
+			  0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
+
+		pcie@0 {
+			ranges = <0x02000000 0x0 0x80000000
+				  0x02000000 0x0 0x80000000
+				  0x0 0x40000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00400000>;
+		};
+	};
+
+	pci1: pcie@fef09000 {
+		status = "disabled";
+	};
+};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/src/powerpc/fsl/interlaken-lac-portals.dtsi b/src/powerpc/fsl/interlaken-lac-portals.dtsi
new file mode 100644
index 000000000000..9cffccf4e07e
--- /dev/null
+++ b/src/powerpc/fsl/interlaken-lac-portals.dtsi
@@ -0,0 +1,156 @@
+/* T4240 Interlaken LAC Portal device tree stub with 24 portals.
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#address-cells = <0x1>;
+#size-cells = <0x1>;
+compatible = "fsl,interlaken-lac-portals";
+
+lportal0: lac-portal@0 {
+	compatible = "fsl,interlaken-lac-portal-v1.0";
+	reg = <0x0 0x1000>;
+};
+
+lportal1: lac-portal@1000 {
+	compatible = "fsl,interlaken-lac-portal-v1.0";
+	reg = <0x1000 0x1000>;
+};
+
+lportal2: lac-portal@2000 {
+	compatible = "fsl,interlaken-lac-portal-v1.0";
+	reg = <0x2000 0x1000>;
+};
+
+lportal3: lac-portal@3000 {
+	compatible = "fsl,interlaken-lac-portal-v1.0";
+	reg = <0x3000 0x1000>;
+};
+
+lportal4: lac-portal@4000 {
+	compatible = "fsl,interlaken-lac-portal-v1.0";
+	reg = <0x4000 0x1000>;
+};
+
+lportal5: lac-portal@5000 {
+	compatible = "fsl,interlaken-lac-portal-v1.0";
+	reg = <0x5000 0x1000>;
+};
+
+lportal6: lac-portal@6000 {
+	compatible = "fsl,interlaken-lac-portal-v1.0";
+	reg = <0x6000 0x1000>;
+};
+
+lportal7: lac-portal@7000 {
+	compatible = "fsl,interlaken-lac-portal-v1.0";
+	reg = <0x7000 0x1000>;
+};
+
+lportal8: lac-portal@8000 {
+	compatible = "fsl,interlaken-lac-portal-v1.0";
+	reg = <0x8000 0x1000>;
+};
+
+lportal9: lac-portal@9000 {
+	compatible = "fsl,interlaken-lac-portal-v1.0";
+	reg = <0x9000 0x1000>;
+};
+
+lportal10: lac-portal@A000 {
+	compatible = "fsl,interlaken-lac-portal-v1.0";
+	reg = <0xA000 0x1000>;
+};
+
+lportal11: lac-portal@B000 {
+	compatible = "fsl,interlaken-lac-portal-v1.0";
+	reg = <0xB000 0x1000>;
+};
+
+lportal12: lac-portal@C000 {
+	compatible = "fsl,interlaken-lac-portal-v1.0";
+	reg = <0xC000 0x1000>;
+};
+
+lportal13: lac-portal@D000 {
+	compatible = "fsl,interlaken-lac-portal-v1.0";
+	reg = <0xD000 0x1000>;
+};
+
+lportal14: lac-portal@E000 {
+	compatible = "fsl,interlaken-lac-portal-v1.0";
+	reg = <0xE000 0x1000>;
+};
+
+lportal15: lac-portal@F000 {
+	compatible = "fsl,interlaken-lac-portal-v1.0";
+	reg = <0xF000 0x1000>;
+};
+
+lportal16: lac-portal@10000 {
+	compatible = "fsl,interlaken-lac-portal-v1.0";
+	reg = <0x10000 0x1000>;
+};
+
+lportal17: lac-portal@11000 {
+	compatible = "fsl,interlaken-lac-portal-v1.0";
+	reg = <0x11000 0x1000>;
+};
+
+lportal18: lac-portal@1200 {
+	compatible = "fsl,interlaken-lac-portal-v1.0";
+	reg = <0x12000 0x1000>;
+};
+
+lportal19: lac-portal@13000 {
+	compatible = "fsl,interlaken-lac-portal-v1.0";
+	reg = <0x13000 0x1000>;
+};
+
+lportal20: lac-portal@14000 {
+	compatible = "fsl,interlaken-lac-portal-v1.0";
+	reg = <0x14000 0x1000>;
+};
+
+lportal21: lac-portal@15000 {
+	compatible = "fsl,interlaken-lac-portal-v1.0";
+	reg = <0x15000 0x1000>;
+};
+
+lportal22: lac-portal@16000 {
+	compatible = "fsl,interlaken-lac-portal-v1.0";
+	reg = <0x16000 0x1000>;
+};
+
+lportal23: lac-portal@17000 {
+	compatible = "fsl,interlaken-lac-portal-v1.0";
+	reg = <0x17000 0x1000>;
+};
diff --git a/src/powerpc/fsl/interlaken-lac.dtsi b/src/powerpc/fsl/interlaken-lac.dtsi
new file mode 100644
index 000000000000..e8208720ac0e
--- /dev/null
+++ b/src/powerpc/fsl/interlaken-lac.dtsi
@@ -0,0 +1,45 @@
+/*
+ * T4 Interlaken Look-aside Controller (LAC) device tree stub
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+lac: lac@229000 {
+	compatible = "fsl,interlaken-lac";
+	reg = <0x229000 0x1000>;
+	interrupts = <16 2 1 18>;
+};
+
+lac-hv@228000 {
+	compatible = "fsl,interlaken-lac-hv";
+	reg = <0x228000 0x1000>;
+	fsl,non-hv-node = <&lac>;
+};
diff --git a/src/powerpc/fsl/kmcoge4.dts b/src/powerpc/fsl/kmcoge4.dts
new file mode 100644
index 000000000000..ae70a24094b0
--- /dev/null
+++ b/src/powerpc/fsl/kmcoge4.dts
@@ -0,0 +1,216 @@
+/*
+ * Keymile kmcoge4 Device Tree Source, based on the P2041RDB DTS
+ *
+ * (C) Copyright 2014
+ * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p2041si-pre.dtsi"
+
+/ {
+	model = "keymile,kmcoge4";
+	compatible = "keymile,kmcoge4", "keymile,kmp204x";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x200000>;
+	};
+
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25fl256s1", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <20000000>; /* input clock */
+			};
+
+			network_clock@1 {
+				compatible = "zarlink,zl30343";
+				reg = <1>;
+				spi-max-frequency = <8000000>;
+			};
+
+			flash@2 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,m25p32", "jedec,spi-nor";
+				reg = <2>;
+				spi-max-frequency = <15000000>;
+			};
+		};
+
+		i2c@119000 {
+			status = "disabled";
+		};
+
+		i2c@119100 {
+			status = "disabled";
+		};
+
+		usb0: usb@210000 {
+			status = "disabled";
+		};
+
+		usb1: usb@211000 {
+			status = "disabled";
+		};
+
+		sata@220000 {
+			status = "disabled";
+		};
+
+		sata@221000 {
+			status = "disabled";
+		};
+
+		fman0: fman@400000 {
+			enet0: ethernet@e0000 {
+				phy-connection-type = "sgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+			mdio0: mdio@e1120 {
+				front_phy: ethernet-phy@11 {
+					reg = <0x11>;
+				};
+			};
+
+			enet1: ethernet@e2000 {
+				phy-connection-type = "sgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+			enet2: ethernet@e4000 {
+				status = "disabled";
+			};
+
+			enet3: ethernet@e6000 {
+				status = "disabled";
+			};
+			enet4: ethernet@e8000 {
+				phy-handle = <&front_phy>;
+				phy-connection-type = "rgmii";
+			};
+			enet5: ethernet@f0000 {
+				status = "disabled";
+			};
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		status = "disabled";
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xffa00000 0x00040000		/* LB 0 */
+			  1 0 0xf 0xfb000000 0x00010000		/* LB 1 */
+			  2 0 0xf 0xd0000000 0x10000000		/* LB 2 */
+			  3 0 0xf 0xe0000000 0x10000000>;	/* LB 3 */
+
+		nand@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0 0 0x40000>;
+		};
+
+		board-control@1,0 {
+			compatible = "keymile,qriox";
+			reg = <1 0 0x80>;
+		};
+
+		chassis-mgmt@3,0 {
+			compatible = "keymile,bfticu";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <3 0 0x100>;
+			interrupt-parent = <&mpic>;
+			interrupts = <6 1 0 0>;
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		status = "disabled";
+	};
+
+	pci2: pcie@ffe202000 {
+		reg = <0xf 0xfe202000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "p2041si-post.dtsi"
diff --git a/src/powerpc/fsl/mpc8536ds.dts b/src/powerpc/fsl/mpc8536ds.dts
new file mode 100644
index 000000000000..96cdce841205
--- /dev/null
+++ b/src/powerpc/fsl/mpc8536ds.dts
@@ -0,0 +1,109 @@
+/*
+ * MPC8536 DS Device Tree Source
+ *
+ * Copyright 2008, 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc8536si-pre.dtsi"
+
+/ {
+	model = "fsl,mpc8536ds";
+	compatible = "fsl,mpc8536ds";
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8536@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0 0>;	// Filled by U-Boot
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
+			  0x2 0x0 0x0 0xffa00000 0x00040000
+			  0x3 0x0 0x0 0xffdf0000 0x00008000>;
+	};
+
+	board_soc: soc: soc@ffe00000 {
+		ranges = <0x0 0 0xffe00000 0x100000>;
+	};
+
+	pci0: pci@ffe08000 {
+		reg = <0 0xffe08000 0 0x1000>;
+		ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000
+			  0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x11 J17 Slot 1 */
+			0x8800 0 0 1 &mpic 1 1 0 0
+			0x8800 0 0 2 &mpic 2 1 0 0
+			0x8800 0 0 3 &mpic 3 1 0 0
+			0x8800 0 0 4 &mpic 4 1 0 0>;
+	};
+
+	pci1: pcie@ffe09000 {
+		reg = <0 0xffe09000 0 0x1000>;
+		ranges = <0x02000000 0 0x98000000 0 0x98000000 0 0x08000000
+			  0x01000000 0 0x00000000 0 0xffc20000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0x98000000
+				  0x02000000 0 0x98000000
+				  0 0x08000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x02000000 0 0x90000000 0 0x90000000 0 0x08000000
+			  0x01000000 0 0x00000000 0 0xffc10000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0x90000000
+				  0x02000000 0 0x90000000
+				  0 0x08000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe0b000 {
+		reg = <0 0xffe0b000 0 0x1000>;
+		ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000
+			  0x01000000 0 0x00000000 0 0xffc30000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xa0000000
+				  0x02000000 0 0xa0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00100000>;
+		};
+	};
+};
+
+/include/ "mpc8536si-post.dtsi"
+/include/ "mpc8536ds.dtsi"
diff --git a/src/powerpc/fsl/mpc8536ds.dtsi b/src/powerpc/fsl/mpc8536ds.dtsi
new file mode 100644
index 000000000000..a925fe49a73e
--- /dev/null
+++ b/src/powerpc/fsl/mpc8536ds.dtsi
@@ -0,0 +1,244 @@
+/*
+ * MPC8536DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			reg = <0x0 0x03000000>;
+			label = "ramdisk-nor";
+		};
+
+		partition@3000000 {
+			reg = <0x03000000 0x00e00000>;
+			label = "diagnostic-nor";
+			read-only;
+		};
+
+		partition@3e00000 {
+			reg = <0x03e00000 0x00200000>;
+			label = "dink-nor";
+			read-only;
+		};
+
+		partition@4000000 {
+			reg = <0x04000000 0x00400000>;
+			label = "kernel-nor";
+		};
+
+		partition@4400000 {
+			reg = <0x04400000 0x03b00000>;
+			label = "fs-nor";
+		};
+
+		partition@7f00000 {
+			reg = <0x07f00000 0x00080000>;
+			label = "dtb-nor";
+		};
+
+		partition@7f80000 {
+			reg = <0x07f80000 0x00080000>;
+			label = "u-boot-nor";
+			read-only;
+		};
+	};
+
+	nand@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8536-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x2 0x0 0x40000>;
+
+		partition@0 {
+			reg = <0x0 0x02000000>;
+			label = "u-boot-nand";
+			read-only;
+		};
+
+		partition@2000000 {
+			reg = <0x02000000 0x10000000>;
+			label = "fs-nand";
+		};
+
+		partition@12000000 {
+			reg = <0x12000000 0x08000000>;
+			label = "ramdisk-nand";
+		};
+
+		partition@1a000000 {
+			reg = <0x1a000000 0x04000000>;
+			label = "kernel-nand";
+		};
+
+		partition@1e000000 {
+			reg = <0x1e000000 0x01000000>;
+			label = "dtb-nand";
+		};
+
+		partition@1f000000 {
+			reg = <0x1f000000 0x21000000>;
+			label = "empty-nand";
+		};
+	};
+
+	board-control@3,0 {
+		compatible = "fsl,mpc8536ds-fpga-pixis";
+		reg = <0x3 0x0 0x8000>;
+	};
+};
+
+&board_soc {
+	i2c@3100 {
+		rtc@68 {
+			compatible = "dallas,ds3232";
+			reg = <0x68>;
+			interrupts = <0 0x1 0 0>;
+		};
+		adt7461@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <40000000>;
+			partition@u-boot {
+				label = "u-boot";
+				reg = <0x00000000 0x00100000>;
+				read-only;
+			};
+			partition@kernel {
+				label = "kernel";
+				reg = <0x00100000 0x00500000>;
+				read-only;
+			};
+			partition@dtb {
+				label = "dtb";
+				reg = <0x00600000 0x00100000>;
+				read-only;
+			};
+			partition@fs {
+				label = "file system";
+				reg = <0x00700000 0x00900000>;
+			};
+		};
+		flash@1 {
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <1>;
+			spi-max-frequency = <40000000>;
+		};
+		flash@2 {
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <2>;
+			spi-max-frequency = <40000000>;
+		};
+		flash@3 {
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <3>;
+			spi-max-frequency = <40000000>;
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	usb@23000 {
+		phy_type = "ulpi";
+	};
+
+	enet0: ethernet@24000 {
+		tbi-handle = <&tbi0>;
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	mdio@24520 {
+		phy0: ethernet-phy@0 {
+			interrupts = <10 0x1 0 0>;
+			reg = <0>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <10 0x1 0 0>;
+			reg = <1>;
+		};
+		sgmii_phy0: sgmii-phy@0 {
+			interrupts = <6 1 0 0>;
+			reg = <0x1d>;
+		};
+		sgmii_phy1: sgmii-phy@1 {
+			interrupts = <6 1 0 0>;
+			reg = <0x1c>;
+		};
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet2: ethernet@26000 {
+		tbi-handle = <&tbi1>;
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	mdio@26520 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,gianfar-tbi";
+		reg = <0x26520 0x20>;
+
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	usb@2b000 {
+		dr_mode = "peripheral";
+		phy_type = "ulpi";
+	};
+};
diff --git a/src/powerpc/fsl/mpc8536ds_36b.dts b/src/powerpc/fsl/mpc8536ds_36b.dts
new file mode 100644
index 000000000000..38d326ce92d8
--- /dev/null
+++ b/src/powerpc/fsl/mpc8536ds_36b.dts
@@ -0,0 +1,109 @@
+/*
+ * MPC8536DS Device Tree Source (36-bit address map)
+ *
+ * Copyright 2008-2009, 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc8536si-pre.dtsi"
+
+/ {
+	model = "fsl,mpc8536ds";
+	compatible = "fsl,mpc8536ds";
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8536@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0 0>;	// Filled by U-Boot
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+
+		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
+			  0x2 0x0 0xf 0xffa00000 0x00040000
+			  0x3 0x0 0xf 0xffdf0000 0x00008000>;
+	};
+
+	board_soc: soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pci@fffe08000 {
+		reg = <0xf 0xffe08000 0 0x1000>;
+		ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x11 J17 Slot 1 */
+			0x8800 0 0 1 &mpic 1 1 0 0
+			0x8800 0 0 2 &mpic 2 1 0 0
+			0x8800 0 0 3 &mpic 3 1 0 0
+			0x8800 0 0 4 &mpic 4 1 0 0>;
+	};
+
+	pci1: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0 0x1000>;
+		ranges = <0x02000000 0 0xf8000000 0xc 0x18000000 0 0x08000000
+			  0x01000000 0 0x00000000 0xf 0xffc20000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xf8000000
+				  0x02000000 0 0xf8000000
+				  0 0x08000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x02000000 0 0xf8000000 0xc 0x10000000 0 0x08000000
+			  0x01000000 0 0x00000000 0xf 0xffc10000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xf8000000
+				  0x02000000 0 0xf8000000
+				  0 0x08000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@fffe0b000 {
+		reg = <0xf 0xffe0b000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xffc30000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00100000>;
+		};
+	};
+};
+
+/include/ "mpc8536si-post.dtsi"
+/include/ "mpc8536ds.dtsi"
diff --git a/src/powerpc/fsl/mpc8536si-post.dtsi b/src/powerpc/fsl/mpc8536si-post.dtsi
new file mode 100644
index 000000000000..41935709ebe8
--- /dev/null
+++ b/src/powerpc/fsl/mpc8536si-post.dtsi
@@ -0,0 +1,252 @@
+/*
+ * MPC8536 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8536-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+	compatible = "fsl,mpc8540-pci";
+	device_type = "pci";
+	interrupts = <24 0x2 0 0>;
+	bus-range = <0 0xff>;
+	#interrupt-cells = <1>;
+	#size-cells = <2>;
+	#address-cells = <3>;
+};
+
+/* controller at 0x9000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <25 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <25 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xa000 */
+&pci2 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <26 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <26 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xb000 */
+&pci3 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <27 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <27 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+			>;
+	};
+};
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,mpc8536-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,mpc8536-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,mpc8536-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+	spi@7000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+
+	/* mark compat w/8572 to get some erratum treatment */
+	gpio-controller@f000 {
+		compatible = "fsl,mpc8572-gpio";
+	};
+
+	sata@18000 {
+		compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+		reg = <0x18000 0x1000>;
+		cell-index = <1>;
+		interrupts = <74 0x2 0 0>;
+	};
+
+	sata@19000 {
+		compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+		reg = <0x19000 0x1000>;
+		cell-index = <2>;
+		interrupts = <41 0x2 0 0>;
+	};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,mpc8536-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x80000>; // L2, 512K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-timer-0.dtsi"
+
+	usb@22000 {
+		compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+		reg = <0x22000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <28 0x2 0 0>;
+	};
+
+	usb@23000 {
+		compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+		reg = <0x23000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <46 0x2 0 0>;
+	};
+
+	ptp_clock@24e00 {
+		interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
+	};
+
+/include/ "pq3-etsec1-2.dtsi"
+
+	ethernet@26000 {
+		cell-index = <1>;
+	};
+
+	usb@2b000 {
+		compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
+		reg = <0x2b000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <60 0x2 0 0>;
+	};
+
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
+	};
+
+/include/ "pq3-sec3.0-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+	global-utilities@e0000 {
+		compatible = "fsl,mpc8536-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/src/powerpc/fsl/mpc8536si-pre.dtsi b/src/powerpc/fsl/mpc8536si-pre.dtsi
new file mode 100644
index 000000000000..152906f98a0f
--- /dev/null
+++ b/src/powerpc/fsl/mpc8536si-pre.dtsi
@@ -0,0 +1,66 @@
+/*
+ * MPC8536 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,MPC8536";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet2;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8536@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/mpc8540ads.dts b/src/powerpc/fsl/mpc8540ads.dts
new file mode 100644
index 000000000000..e6d0b166d68d
--- /dev/null
+++ b/src/powerpc/fsl/mpc8540ads.dts
@@ -0,0 +1,359 @@
+/*
+ * MPC8540 ADS Device Tree Source
+ *
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	model = "MPC8540ADS";
+	compatible = "MPC8540ADS", "MPC85xxADS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8540@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;	//  33 MHz, from uboot
+			bus-frequency = <0>;	// 166 MHz
+			clock-frequency = <0>;	// 825 MHz, from uboot
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x8000000>;	// 128M at 0x0
+	};
+
+	soc8540@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x100000>;
+		bus-frequency = <0>;
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8540-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8540-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8540-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>;	// L2, 256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@0 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x0>;
+				};
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x1>;
+				};
+				phy3: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <7 1>;
+					reg = <0x3>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "FEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <41 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy3>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+	pci0: pci@e0008000 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x02 */
+			0x1000 0x0 0x0 0x1 &mpic 0x1 0x1
+			0x1000 0x0 0x0 0x2 &mpic 0x2 0x1
+			0x1000 0x0 0x0 0x3 &mpic 0x3 0x1
+			0x1000 0x0 0x0 0x4 &mpic 0x4 0x1
+
+			/* IDSEL 0x03 */
+			0x1800 0x0 0x0 0x1 &mpic 0x4 0x1
+			0x1800 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x1800 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x1800 0x0 0x0 0x4 &mpic 0x3 0x1
+
+			/* IDSEL 0x04 */
+			0x2000 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x2000 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x2000 0x0 0x0 0x3 &mpic 0x1 0x1
+			0x2000 0x0 0x0 0x4 &mpic 0x2 0x1
+
+			/* IDSEL 0x05 */
+			0x2800 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x2800 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x2800 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x2800 0x0 0x0 0x4 &mpic 0x1 0x1
+
+			/* IDSEL 0x0c */
+			0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
+			0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
+			0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
+			0x6000 0x0 0x0 0x4 &mpic 0x4 0x1
+
+			/* IDSEL 0x0d */
+			0x6800 0x0 0x0 0x1 &mpic 0x4 0x1
+			0x6800 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x6800 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x6800 0x0 0x0 0x4 &mpic 0x3 0x1
+
+			/* IDSEL 0x0e */
+			0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x7000 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x7000 0x0 0x0 0x3 &mpic 0x1 0x1
+			0x7000 0x0 0x0 0x4 &mpic 0x2 0x1
+
+			/* IDSEL 0x0f */
+			0x7800 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x7800 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x7800 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x7800 0x0 0x0 0x4 &mpic 0x1 0x1
+
+			/* IDSEL 0x12 */
+			0x9000 0x0 0x0 0x1 &mpic 0x1 0x1
+			0x9000 0x0 0x0 0x2 &mpic 0x2 0x1
+			0x9000 0x0 0x0 0x3 &mpic 0x3 0x1
+			0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
+
+			/* IDSEL 0x13 */
+			0x9800 0x0 0x0 0x1 &mpic 0x4 0x1
+			0x9800 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x9800 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x9800 0x0 0x0 0x4 &mpic 0x3 0x1
+
+			/* IDSEL 0x14 */
+			0xa000 0x0 0x0 0x1 &mpic 0x3 0x1
+			0xa000 0x0 0x0 0x2 &mpic 0x4 0x1
+			0xa000 0x0 0x0 0x3 &mpic 0x1 0x1
+			0xa000 0x0 0x0 0x4 &mpic 0x2 0x1
+
+			/* IDSEL 0x15 */
+			0xa800 0x0 0x0 0x1 &mpic 0x2 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0x3 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0x4 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008000 0x1000>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+	};
+};
diff --git a/src/powerpc/fsl/mpc8541cds.dts b/src/powerpc/fsl/mpc8541cds.dts
new file mode 100644
index 000000000000..9fa2c734a988
--- /dev/null
+++ b/src/powerpc/fsl/mpc8541cds.dts
@@ -0,0 +1,379 @@
+/*
+ * MPC8541 CDS Device Tree Source
+ *
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	model = "MPC8541CDS";
+	compatible = "MPC8541CDS", "MPC85xxCDS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8541@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;	//  33 MHz, from uboot
+			bus-frequency = <0>;	// 166 MHz
+			clock-frequency = <0>;	// 825 MHz, from uboot
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x8000000>;	// 128M at 0x0
+	};
+
+	soc8541@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x100000>;
+		bus-frequency = <0>;
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8541-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8541-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8541-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>;	// L2, 256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@0 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x0>;
+				};
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x1>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		cpm@919c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8541-cpm", "fsl,cpm2";
+			reg = <0x919c0 0x30>;
+			ranges;
+
+			muram@80000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x80000 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x2000 0x9000 0x1000>;
+				};
+			};
+
+			brg@919f0 {
+				compatible = "fsl,mpc8541-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <0x919f0 0x10 0x915f0 0x10>;
+			};
+
+			cpmpic: pic@90c00 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupts = <46 2>;
+				interrupt-parent = <&mpic>;
+				reg = <0x90c00 0x80>;
+				compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic";
+			};
+		};
+	};
+
+	pci0: pci@e0008000 {
+		interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x10 */
+			0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
+
+			/* IDSEL 0x11 */
+			0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
+
+			/* IDSEL 0x12 (Slot 1) */
+			0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
+
+			/* IDSEL 0x13 (Slot 2) */
+			0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
+			0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
+			0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
+			0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
+
+			/* IDSEL 0x14 (Slot 3) */
+			0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
+			0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
+			0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
+			0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
+
+			/* IDSEL 0x15 (Slot 4) */
+			0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
+
+			/* Bus 1 (Tundra Bridge) */
+			/* IDSEL 0x12 (ISA bridge) */
+			0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008000 0x1000>;
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+
+		i8259@19000 {
+			interrupt-controller;
+			device_type = "interrupt-controller";
+			reg = <0x19000 0x0 0x0 0x0 0x1>;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			compatible = "chrp,iic";
+			interrupts = <1>;
+			interrupt-parent = <&pci0>;
+		};
+	};
+
+	pci1: pci@e0009000 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x15 */
+			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		bus-range = <0 0>;
+		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0009000 0x1000>;
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+	};
+};
diff --git a/src/powerpc/fsl/mpc8544ds.dts b/src/powerpc/fsl/mpc8544ds.dts
new file mode 100644
index 000000000000..5a6e46861ab5
--- /dev/null
+++ b/src/powerpc/fsl/mpc8544ds.dts
@@ -0,0 +1,107 @@
+/*
+ * MPC8544 DS Device Tree Source
+ *
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc8544si-pre.dtsi"
+
+/ {
+	model = "MPC8544DS";
+	compatible = "MPC8544DS", "MPC85xxDS";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0 0>;	// Filled by U-Boot
+	};
+
+	board_lbc: lbc: localbus@e0005000 {
+		reg = <0 0xe0005000 0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xff800000 0x800000>;
+	};
+
+	board_soc: soc: soc8544@e0000000 {
+		ranges = <0x0 0x0 0xe0000000 0x100000>;
+	};
+
+	pci0: pci@e0008000 {
+		reg = <0 0xe0008000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xe1000000 0x0 0x10000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x11 J17 Slot 1 */
+			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x12 J16 Slot 2 */
+
+			0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+			0x9000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0>;
+	};
+
+	pci1: pcie@e0009000 {
+		reg = <0x0 0xe0009000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xe1010000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	pci2: pcie@e000a000 {
+		reg = <0x0 0xe000a000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe1020000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x10000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	board_pci3: pci3: pcie@e000b000 {
+		reg = <0x0 0xe000b000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xb0000000 0 0xb0000000 0x0 0x100000
+			  0x1000000 0x0 0x00000000 0 0xb0100000 0x0 0x100000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xb0000000
+				  0x2000000 0x0 0xb0000000
+				  0x0 0x100000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/*
+ * mpc8544ds.dtsi must be last to ensure board_pci3 overrides pci3 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "mpc8544si-post.dtsi"
+/include/ "mpc8544ds.dtsi"
diff --git a/src/powerpc/fsl/mpc8544ds.dtsi b/src/powerpc/fsl/mpc8544ds.dtsi
new file mode 100644
index 000000000000..47d986b041f6
--- /dev/null
+++ b/src/powerpc/fsl/mpc8544ds.dtsi
@@ -0,0 +1,207 @@
+/*
+ * MPC8544DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x800000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			reg = <0x0 0x10000>;
+			label = "dtb-nor";
+		};
+
+		partition@20000 {
+			reg = <0x20000 0x30000>;
+			label = "diagnostic-nor";
+			read-only;
+		};
+
+		partition@200000 {
+			reg = <0x200000 0x200000>;
+			label = "dink-nor";
+			read-only;
+		};
+
+		partition@400000 {
+			reg = <0x400000 0x380000>;
+			label = "kernel-nor";
+		};
+
+		partition@780000 {
+			reg = <0x780000 0x80000>;
+			label = "u-boot-nor";
+			read-only;
+		};
+	};
+};
+
+&board_soc {
+	enet0: ethernet@24000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	mdio@24520 {
+		phy0: ethernet-phy@0 {
+			interrupts = <10 1 0 0>;
+			reg = <0x0>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <10 1 0 0>;
+			reg = <0x1>;
+		};
+
+		sgmii_phy0: sgmii-phy@0 {
+			interrupts = <6 1 0 0>;
+			reg = <0x1c>;
+		};
+		sgmii_phy1: sgmii-phy@1 {
+			interrupts = <6 1 0 0>;
+			reg = <0x1d>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet2: ethernet@26000 {
+		phy-handle = <&phy1>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	mdio@26520 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+};
+
+&board_pci3 {
+	pcie@0 {
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+		interrupt-map = <
+			// IDSEL 0x1c  USB
+			0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+			0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+			0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+			0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
+
+			// IDSEL 0x1d  Audio
+			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+			// IDSEL 0x1e Legacy
+			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+			// IDSEL 0x1f IDE/SATA
+			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+			>;
+
+
+		uli1575@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			ranges = <0x2000000 0x0 0xb0000000
+				  0x2000000 0x0 0xb0000000
+				  0x0 0x100000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+			isa@1e {
+				device_type = "isa";
+				#interrupt-cells = <2>;
+				#size-cells = <1>;
+				#address-cells = <2>;
+				reg = <0xf000 0x0 0x0 0x0 0x0>;
+				ranges = <0x1 0x0 0x1000000 0x0 0x0
+					  0x1000>;
+				interrupt-parent = <&i8259>;
+
+				i8259: interrupt-controller@20 {
+					reg = <0x1 0x20 0x2
+					       0x1 0xa0 0x2
+					       0x1 0x4d0 0x2>;
+					interrupt-controller;
+					device_type = "interrupt-controller";
+					#address-cells = <0>;
+					#interrupt-cells = <2>;
+					compatible = "chrp,iic";
+					interrupts = <9 2 0 0>;
+					interrupt-parent = <&mpic>;
+				};
+
+				i8042@60 {
+					#size-cells = <0>;
+					#address-cells = <1>;
+					reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+					interrupts = <1 3 12 3>;
+					interrupt-parent =
+						<&i8259>;
+
+					keyboard@0 {
+						reg = <0x0>;
+						compatible = "pnpPNP,303";
+					};
+
+					mouse@1 {
+						reg = <0x1>;
+						compatible = "pnpPNP,f03";
+					};
+				};
+
+				rtc@70 {
+					compatible = "pnpPNP,b00";
+					reg = <0x1 0x70 0x2>;
+				};
+
+				gpio@400 {
+					reg = <0x1 0x400 0x80>;
+				};
+			};
+		};
+	};
+};
diff --git a/src/powerpc/fsl/mpc8544si-post.dtsi b/src/powerpc/fsl/mpc8544si-post.dtsi
new file mode 100644
index 000000000000..b68eb119faef
--- /dev/null
+++ b/src/powerpc/fsl/mpc8544si-post.dtsi
@@ -0,0 +1,191 @@
+/*
+ * MPC8544 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8544-lbc", "fsl,pq3-localbus", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+	compatible = "fsl,mpc8540-pci";
+	device_type = "pci";
+	interrupts = <24 0x2 0 0>;
+	bus-range = <0 0xff>;
+	#interrupt-cells = <1>;
+	#size-cells = <2>;
+	#address-cells = <3>;
+};
+
+/* controller at 0x9000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <25 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <25 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xa000 */
+&pci2 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <26 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <26 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xb000 */
+&pci3 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <27 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <27 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,mpc8544-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <10>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,mpc8544-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,mpc8544-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,mpc8544-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2, 256K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+
+	ethernet@26000 {
+		cell-index = <1>;
+	};
+
+/include/ "pq3-sec2.1-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+
+	global-utilities@e0000 {
+		compatible = "fsl,mpc8544-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/src/powerpc/fsl/mpc8544si-pre.dtsi b/src/powerpc/fsl/mpc8544si-pre.dtsi
new file mode 100644
index 000000000000..5a69bafb652a
--- /dev/null
+++ b/src/powerpc/fsl/mpc8544si-pre.dtsi
@@ -0,0 +1,66 @@
+/*
+ * MPC8544 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,MPC8544";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet2;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8544@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/mpc8548cds.dtsi b/src/powerpc/fsl/mpc8548cds.dtsi
new file mode 100644
index 000000000000..3bc7d4711220
--- /dev/null
+++ b/src/powerpc/fsl/mpc8548cds.dtsi
@@ -0,0 +1,302 @@
+/*
+ * MPC8548CDS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x01000000>;
+		bank-width = <2>;
+		device-width = <2>;
+
+		partition@0 {
+			reg = <0x0 0x0b00000>;
+			label = "ramdisk-nor";
+		};
+
+		partition@300000 {
+			reg = <0x0b00000 0x0400000>;
+			label = "kernel-nor";
+		};
+
+		partition@700000 {
+			reg = <0x0f00000 0x060000>;
+			label = "dtb-nor";
+		};
+
+		partition@760000 {
+			reg = <0x0f60000 0x020000>;
+			label = "env-nor";
+			read-only;
+		};
+
+		partition@780000 {
+			reg = <0x0f80000 0x080000>;
+			label = "u-boot-nor";
+			read-only;
+		};
+	};
+
+	board-control@1,0 {
+		compatible = "fsl,mpc8548cds-fpga";
+		reg = <0x1 0x0 0x1000>;
+	};
+};
+
+&board_soc {
+	i2c@3000 {
+		eeprom@50 {
+			compatible = "atmel,24c64";
+			reg = <0x50>;
+		};
+
+		eeprom@56 {
+			compatible = "atmel,24c64";
+			reg = <0x56>;
+		};
+
+		eeprom@57 {
+			compatible = "atmel,24c64";
+			reg = <0x57>;
+		};
+	};
+
+	i2c@3100 {
+		eeprom@50 {
+			compatible = "atmel,24c64";
+			reg = <0x50>;
+		};
+	};
+
+	enet0: ethernet@24000 {
+		tbi-handle = <&tbi0>;
+		phy-handle = <&phy0>;
+	};
+
+	mdio@24520 {
+		phy0: ethernet-phy@0 {
+			interrupts = <5 1 0 0>;
+			reg = <0x0>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <5 1 0 0>;
+			reg = <0x1>;
+		};
+		phy2: ethernet-phy@2 {
+			interrupts = <5 1 0 0>;
+			reg = <0x2>;
+		};
+		phy3: ethernet-phy@3 {
+			interrupts = <5 1 0 0>;
+			reg = <0x3>;
+		};
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet1: ethernet@25000 {
+		tbi-handle = <&tbi1>;
+		phy-handle = <&phy1>;
+	};
+
+	mdio@25520 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet2: ethernet@26000 {
+		tbi-handle = <&tbi2>;
+		phy-handle = <&phy2>;
+	};
+
+	mdio@26520 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet3: ethernet@27000 {
+		tbi-handle = <&tbi3>;
+		phy-handle = <&phy3>;
+	};
+
+	mdio@27520 {
+		tbi3: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+};
+
+&board_pci0 {
+	interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+	interrupt-map = <
+		/* IDSEL 0x4 (PCIX Slot 2) */
+		0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+		0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+		0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+		0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+		/* IDSEL 0x5 (PCIX Slot 3) */
+		0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
+		0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
+		0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
+		0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
+
+		/* IDSEL 0x6 (PCIX Slot 4) */
+		0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+		0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+		0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+		0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+		/* IDSEL 0x8 (PCIX Slot 5) */
+		0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+		0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+		0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+		0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+		/* IDSEL 0xC (Tsi310 bridge) */
+		0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+		0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+		0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+		0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+		/* IDSEL 0x14 (Slot 2) */
+		0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+		0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+		0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+		0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+		/* IDSEL 0x15 (Slot 3) */
+		0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
+		0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
+		0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
+		0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
+
+		/* IDSEL 0x16 (Slot 4) */
+		0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+		0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+		0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+		0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+		/* IDSEL 0x18 (Slot 5) */
+		0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+		0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+		0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+		0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+		/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
+		0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+		0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+		0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+		0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
+
+	pci_bridge@1c {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x00 (PrPMC Site) */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+			/* IDSEL 0x04 (VIA chip) */
+			0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+			0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+			0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+			0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+			/* IDSEL 0x05 (8139) */
+			0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x06 (Slot 6) */
+			0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+			0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDESL 0x07 (Slot 7) */
+			0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0
+			0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>;
+
+		reg = <0xe000 0x0 0x0 0x0 0x0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		ranges = <0x2000000 0x0 0x80000000
+			  0x2000000 0x0 0x80000000
+			  0x0 0x20000000
+			  0x1000000 0x0 0x0
+			  0x1000000 0x0 0x0
+			  0x0 0x80000>;
+		clock-frequency = <33333333>;
+
+		isa@4 {
+			device_type = "isa";
+			#interrupt-cells = <2>;
+			#size-cells = <1>;
+			#address-cells = <2>;
+			reg = <0x2000 0x0 0x0 0x0 0x0>;
+			ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
+			interrupt-parent = <&i8259>;
+
+			i8259: interrupt-controller@20 {
+				interrupt-controller;
+				device_type = "interrupt-controller";
+				reg = <0x1 0x20 0x2
+				       0x1 0xa0 0x2
+				       0x1 0x4d0 0x2>;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				compatible = "chrp,iic";
+				interrupts = <0 1 0 0>;
+				interrupt-parent = <&mpic>;
+			};
+
+			rtc@70 {
+				compatible = "pnpPNP,b00";
+				reg = <0x1 0x70 0x2>;
+			};
+		};
+	};
+};
diff --git a/src/powerpc/fsl/mpc8548cds_32b.dts b/src/powerpc/fsl/mpc8548cds_32b.dts
new file mode 100644
index 000000000000..e4620bb192f4
--- /dev/null
+++ b/src/powerpc/fsl/mpc8548cds_32b.dts
@@ -0,0 +1,86 @@
+/*
+ * MPC8548 CDS Device Tree Source (32-bit address map)
+ *
+ * Copyright 2006, 2008, 2011-2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc8548si-pre.dtsi"
+
+/ {
+	model = "MPC8548CDS";
+	compatible = "MPC8548CDS", "MPC85xxCDS";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0x0 0x8000000>;	// 128M at 0x0
+	};
+
+	board_lbc: lbc: localbus@e0005000 {
+		reg = <0 0xe0005000 0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xff000000 0x01000000
+			  0x1 0x0 0x0 0xf8004000 0x00001000>;
+
+	};
+
+	board_soc: soc: soc8548@e0000000 {
+		ranges = <0 0x0 0xe0000000 0x100000>;
+	};
+
+	board_pci0: pci0: pci@e0008000 {
+		reg = <0 0xe0008000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>;
+		clock-frequency = <66666666>;
+	};
+
+	pci1: pci@e0009000 {
+		reg = <0 0xe0009000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x15 */
+			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
+			0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+			0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+			0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
+	};
+
+	pci2: pcie@e000a000 {
+		reg = <0 0xe000a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	rio: rapidio@e00c0000 {
+		reg = <0x0 0xe00c0000 0x0 0x20000>;
+		port1 {
+			ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
+		};
+	};
+};
+
+/*
+ * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask.
+ */
+
+/include/ "mpc8548si-post.dtsi"
+/include/ "mpc8548cds.dtsi"
diff --git a/src/powerpc/fsl/mpc8548cds_36b.dts b/src/powerpc/fsl/mpc8548cds_36b.dts
new file mode 100644
index 000000000000..bca7c09d3edf
--- /dev/null
+++ b/src/powerpc/fsl/mpc8548cds_36b.dts
@@ -0,0 +1,86 @@
+/*
+ * MPC8548 CDS Device Tree Source (36-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc8548si-pre.dtsi"
+
+/ {
+	model = "MPC8548CDS";
+	compatible = "MPC8548CDS", "MPC85xxCDS";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0x0 0x8000000>;	// 128M at 0x0
+	};
+
+	board_lbc: lbc: localbus@fe0005000 {
+		reg = <0xf 0xe0005000 0 0x1000>;
+
+		ranges = <0x0 0x0 0xf 0xff000000 0x01000000
+			  0x1 0x0 0xf 0xf8004000 0x00001000>;
+
+	};
+
+	board_soc: soc: soc8548@fe0000000 {
+		ranges = <0 0xf 0xe0000000 0x100000>;
+	};
+
+	board_pci0: pci0: pci@fe0008000 {
+		reg = <0xf 0xe0008000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0xf 0xe2000000 0x0 0x800000>;
+		clock-frequency = <66666666>;
+	};
+
+	pci1: pci@fe0009000 {
+		reg = <0xf 0xe0009000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0xf 0xe2800000 0x0 0x800000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x15 */
+			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
+			0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+			0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+			0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
+	};
+
+	pci2: pcie@fe000a000 {
+		reg = <0xf 0xe000a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xe3000000 0x0 0x100000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	rio: rapidio@fe00c0000 {
+		reg = <0xf 0xe00c0000 0x0 0x20000>;
+		port1 {
+			ranges = <0x0 0x0 0xc 0x40000000 0x0 0x20000000>;
+		};
+	};
+};
+
+/*
+ * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask.
+ */
+
+/include/ "mpc8548si-post.dtsi"
+/include/ "mpc8548cds.dtsi"
diff --git a/src/powerpc/fsl/mpc8548si-post.dtsi b/src/powerpc/fsl/mpc8548si-post.dtsi
new file mode 100644
index 000000000000..579d76cb8e32
--- /dev/null
+++ b/src/powerpc/fsl/mpc8548si-post.dtsi
@@ -0,0 +1,159 @@
+/*
+ * MPC8548 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8548-lbc", "fsl,pq3-localbus", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+	compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+	device_type = "pci";
+	interrupts = <24 0x2 0 0>;
+	bus-range = <0 0xff>;
+	#interrupt-cells = <1>;
+	#size-cells = <2>;
+	#address-cells = <3>;
+};
+
+/* controller at 0x9000 */
+&pci1 {
+	compatible = "fsl,mpc8540-pci";
+	device_type = "pci";
+	interrupts = <25 0x2 0 0>;
+	bus-range = <0 0xff>;
+	#interrupt-cells = <1>;
+	#size-cells = <2>;
+	#address-cells = <3>;
+};
+
+/* controller at 0xa000 */
+&pci2 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <26 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <26 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <48 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,srio-rmu-handle = <&rmu>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,mpc8548-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <10>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,mpc8548-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,mpc8548-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x80000>; // L2, 512K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-1.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+/include/ "pq3-etsec1-3.dtsi"
+
+/include/ "pq3-sec2.1-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-rmu-0.dtsi"
+
+	global-utilities@e0000 {
+		compatible = "fsl,mpc8548-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/src/powerpc/fsl/mpc8548si-pre.dtsi b/src/powerpc/fsl/mpc8548si-pre.dtsi
new file mode 100644
index 000000000000..fc1ce977422b
--- /dev/null
+++ b/src/powerpc/fsl/mpc8548si-pre.dtsi
@@ -0,0 +1,67 @@
+/*
+ * MPC8548 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,MPC8548";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/mpc8555cds.dts b/src/powerpc/fsl/mpc8555cds.dts
new file mode 100644
index 000000000000..272f08caea92
--- /dev/null
+++ b/src/powerpc/fsl/mpc8555cds.dts
@@ -0,0 +1,379 @@
+/*
+ * MPC8555 CDS Device Tree Source
+ *
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	model = "MPC8555CDS";
+	compatible = "MPC8555CDS", "MPC85xxCDS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8555@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;	//  33 MHz, from uboot
+			bus-frequency = <0>;	// 166 MHz
+			clock-frequency = <0>;	// 825 MHz, from uboot
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x8000000>;	// 128M at 0x0
+	};
+
+	soc8555@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x100000>;
+		bus-frequency = <0>;
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8555-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8555-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8555-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>;	// L2, 256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@0 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x0>;
+				};
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x1>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		cpm@919c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-cpm", "fsl,cpm2";
+			reg = <0x919c0 0x30>;
+			ranges;
+
+			muram@80000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x80000 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x2000 0x9000 0x1000>;
+				};
+			};
+
+			brg@919f0 {
+				compatible = "fsl,mpc8555-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <0x919f0 0x10 0x915f0 0x10>;
+			};
+
+			cpmpic: pic@90c00 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupts = <46 2>;
+				interrupt-parent = <&mpic>;
+				reg = <0x90c00 0x80>;
+				compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic";
+			};
+		};
+	};
+
+	pci0: pci@e0008000 {
+		interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x10 */
+			0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
+
+			/* IDSEL 0x11 */
+			0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
+
+			/* IDSEL 0x12 (Slot 1) */
+			0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
+
+			/* IDSEL 0x13 (Slot 2) */
+			0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
+			0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
+			0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
+			0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
+
+			/* IDSEL 0x14 (Slot 3) */
+			0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
+			0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
+			0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
+			0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
+
+			/* IDSEL 0x15 (Slot 4) */
+			0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
+
+			/* Bus 1 (Tundra Bridge) */
+			/* IDSEL 0x12 (ISA bridge) */
+			0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008000 0x1000>;
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+
+		i8259@19000 {
+			interrupt-controller;
+			device_type = "interrupt-controller";
+			reg = <0x19000 0x0 0x0 0x0 0x1>;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			compatible = "chrp,iic";
+			interrupts = <1>;
+			interrupt-parent = <&pci0>;
+		};
+	};
+
+	pci1: pci@e0009000 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x15 */
+			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		bus-range = <0 0>;
+		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0009000 0x1000>;
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+	};
+};
diff --git a/src/powerpc/fsl/mpc8560ads.dts b/src/powerpc/fsl/mpc8560ads.dts
new file mode 100644
index 000000000000..7a822b08aa35
--- /dev/null
+++ b/src/powerpc/fsl/mpc8560ads.dts
@@ -0,0 +1,392 @@
+/*
+ * MPC8560 ADS Device Tree Source
+ *
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	model = "MPC8560ADS";
+	compatible = "MPC8560ADS", "MPC85xxADS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8560@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <82500000>;
+			bus-frequency = <330000000>;
+			clock-frequency = <825000000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x10000000>;
+	};
+
+	soc8560@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x100000>;
+		bus-frequency = <330000000>;
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8540-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8540-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>;	// L2, 256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@0 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x0>;
+				};
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x1>;
+				};
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <7 1>;
+					reg = <0x2>;
+				};
+				phy3: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <7 1>;
+					reg = <0x3>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		cpm@919c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
+			reg = <0x919c0 0x30>;
+			ranges;
+
+			muram@80000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x80000 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x4000 0x9000 0x2000>;
+				};
+			};
+
+			brg@919f0 {
+				compatible = "fsl,mpc8560-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <0x919f0 0x10 0x915f0 0x10>;
+				clock-frequency = <165000000>;
+			};
+
+			cpmpic: pic@90c00 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupts = <46 2>;
+				interrupt-parent = <&mpic>;
+				reg = <0x90c00 0x80>;
+				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
+			};
+
+			serial0: serial@91a00 {
+				device_type = "serial";
+				compatible = "fsl,mpc8560-scc-uart",
+				             "fsl,cpm2-scc-uart";
+				reg = <0x91a00 0x20 0x88000 0x100>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x800000>;
+				current-speed = <115200>;
+				interrupts = <40 8>;
+				interrupt-parent = <&cpmpic>;
+			};
+
+			serial1: serial@91a20 {
+				device_type = "serial";
+				compatible = "fsl,mpc8560-scc-uart",
+				             "fsl,cpm2-scc-uart";
+				reg = <0x91a20 0x20 0x88100 0x100>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <0x4a00000>;
+				current-speed = <115200>;
+				interrupts = <41 8>;
+				interrupt-parent = <&cpmpic>;
+			};
+
+			enet2: ethernet@91320 {
+				device_type = "network";
+				compatible = "fsl,mpc8560-fcc-enet",
+				             "fsl,cpm2-fcc-enet";
+				reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				fsl,cpm-command = <0x16200300>;
+				interrupts = <33 8>;
+				interrupt-parent = <&cpmpic>;
+				phy-handle = <&phy2>;
+			};
+
+			enet3: ethernet@91340 {
+				device_type = "network";
+				compatible = "fsl,mpc8560-fcc-enet",
+				             "fsl,cpm2-fcc-enet";
+				reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				fsl,cpm-command = <0x1a400300>;
+				interrupts = <34 8>;
+				interrupt-parent = <&cpmpic>;
+				phy-handle = <&phy3>;
+			};
+		};
+	};
+
+	pci0: pci@e0008000 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xe0008000 0x1000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+				/* IDSEL 0x2 */
+				 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1
+				 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1
+				 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1
+				 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1
+
+				/* IDSEL 0x3 */
+				 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1
+				 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1
+				 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1
+				 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1
+
+				/* IDSEL 0x4 */
+				 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1
+				 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1
+				 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1
+				 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1
+
+				/* IDSEL 0x5  */
+				 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1
+				 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1
+				 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1
+				 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1
+
+				/* IDSEL 12 */
+				 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
+				 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
+				 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
+				 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1
+
+				/* IDSEL 13 */
+				 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1
+				 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1
+				 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1
+				 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1
+
+				/* IDSEL 14*/
+				 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
+				 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1
+				 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1
+				 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1
+
+				/* IDSEL 15 */
+				 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1
+				 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1
+				 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1
+				 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1
+
+				/* IDSEL 18 */
+				 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1
+				 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1
+				 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1
+				 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
+
+				/* IDSEL 19 */
+				 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1
+				 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1
+				 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1
+				 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1
+
+				/* IDSEL 20 */
+				 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1
+				 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1
+				 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1
+				 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1
+
+				/* IDSEL 21 */
+				 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1
+				 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1
+				 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1
+				 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe2000000 0x0 0x1000000>;
+	};
+};
diff --git a/src/powerpc/fsl/mpc8568mds.dts b/src/powerpc/fsl/mpc8568mds.dts
new file mode 100644
index 000000000000..01706a339603
--- /dev/null
+++ b/src/powerpc/fsl/mpc8568mds.dts
@@ -0,0 +1,314 @@
+/*
+ * MPC8568E MDS Device Tree Source
+ *
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc8568si-pre.dtsi"
+
+/ {
+	model = "MPC8568EMDS";
+	compatible = "MPC8568EMDS", "MPC85xxMDS";
+
+	aliases {
+		pci0 = &pci0;
+		pci1 = &pci1;
+		rapidio0 = &rio;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>;
+	};
+
+	lbc: localbus@e0005000 {
+		reg = <0x0 0xe0005000 0x0 0x1000>;
+		ranges = <0x0 0x0 0xfe000000 0x02000000
+			  0x1 0x0 0xf8000000 0x00008000
+			  0x2 0x0 0xf0000000 0x04000000
+			  0x4 0x0 0xf8008000 0x00008000
+			  0x5 0x0 0xf8010000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x02000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+
+		bcsr@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8568mds-bcsr";
+			reg = <1 0 0x8000>;
+			ranges = <0 1 0 0x8000>;
+
+			bcsr5: gpio-controller@11 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8568mds-bcsr-gpio";
+				reg = <0x5 0x1>;
+				gpio-controller;
+			};
+		};
+
+		pib@4,0 {
+			compatible = "fsl,mpc8568mds-pib";
+			reg = <4 0 0x8000>;
+		};
+
+		pib@5,0 {
+			compatible = "fsl,mpc8568mds-pib";
+			reg = <5 0 0x8000>;
+		};
+	};
+
+	soc: soc8568@e0000000 {
+		ranges = <0x0 0x0 0xe0000000 0x100000>;
+
+		i2c-sleep-nexus {
+			i2c@3000 {
+				rtc@68 {
+					compatible = "dallas,ds1374";
+					reg = <0x68>;
+					interrupts = <3 1 0 0>;
+				};
+			};
+		};
+
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@7 {
+				interrupts = <1 1 0 0>;
+				reg = <0x7>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupts = <2 1 0 0>;
+				reg = <0x1>;
+			};
+			phy2: ethernet-phy@2 {
+				interrupts = <1 1 0 0>;
+				reg = <0x2>;
+			};
+			phy3: ethernet-phy@3 {
+				interrupts = <2 1 0 0>;
+				reg = <0x3>;
+			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet1: ethernet@25000 {
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy3>;
+			sleep = <&pmc 0x00000040>;
+		};
+
+		mdio@25520 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		par_io@e0100 {
+			num-ports = <7>;
+
+			pio1: ucc_pin@01 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x4  0xa  0x1  0x0  0x2  0x0 	/* TxD0 */
+					0x4  0x9  0x1  0x0  0x2  0x0 	/* TxD1 */
+					0x4  0x8  0x1  0x0  0x2  0x0 	/* TxD2 */
+					0x4  0x7  0x1  0x0  0x2  0x0 	/* TxD3 */
+					0x4  0x17  0x1  0x0  0x2  0x0 	/* TxD4 */
+					0x4  0x16  0x1  0x0  0x2  0x0 	/* TxD5 */
+					0x4  0x15  0x1  0x0  0x2  0x0 	/* TxD6 */
+					0x4  0x14  0x1  0x0  0x2  0x0 	/* TxD7 */
+					0x4  0xf  0x2  0x0  0x2  0x0 	/* RxD0 */
+					0x4  0xe  0x2  0x0  0x2  0x0 	/* RxD1 */
+					0x4  0xd  0x2  0x0  0x2  0x0 	/* RxD2 */
+					0x4  0xc  0x2  0x0  0x2  0x0 	/* RxD3 */
+					0x4  0x1d  0x2  0x0  0x2  0x0 	/* RxD4 */
+					0x4  0x1c  0x2  0x0  0x2  0x0 	/* RxD5 */
+					0x4  0x1b  0x2  0x0  0x2  0x0 	/* RxD6 */
+					0x4  0x1a  0x2  0x0  0x2  0x0 	/* RxD7 */
+					0x4  0xb  0x1  0x0  0x2  0x0 	/* TX_EN */
+					0x4  0x18  0x1  0x0  0x2  0x0 	/* TX_ER */
+					0x4  0x10  0x2  0x0  0x2  0x0 	/* RX_DV */
+					0x4  0x1e  0x2  0x0  0x2  0x0 	/* RX_ER */
+					0x4  0x11  0x2  0x0  0x2  0x0 	/* RX_CLK */
+					0x4  0x13  0x1  0x0  0x2  0x0 	/* GTX_CLK */
+					0x1  0x1f  0x2  0x0  0x3  0x0>;	/* GTX125 */
+			};
+
+			pio2: ucc_pin@02 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x5  0xa 0x1  0x0  0x2  0x0   /* TxD0 */
+					0x5  0x9 0x1  0x0  0x2  0x0   /* TxD1 */
+					0x5  0x8 0x1  0x0  0x2  0x0   /* TxD2 */
+					0x5  0x7 0x1  0x0  0x2  0x0   /* TxD3 */
+					0x5  0x17 0x1  0x0  0x2  0x0   /* TxD4 */
+					0x5  0x16 0x1  0x0  0x2  0x0   /* TxD5 */
+					0x5  0x15 0x1  0x0  0x2  0x0   /* TxD6 */
+					0x5  0x14 0x1  0x0  0x2  0x0   /* TxD7 */
+					0x5  0xf 0x2  0x0  0x2  0x0   /* RxD0 */
+					0x5  0xe 0x2  0x0  0x2  0x0   /* RxD1 */
+					0x5  0xd 0x2  0x0  0x2  0x0   /* RxD2 */
+					0x5  0xc 0x2  0x0  0x2  0x0   /* RxD3 */
+					0x5  0x1d 0x2  0x0  0x2  0x0   /* RxD4 */
+					0x5  0x1c 0x2  0x0  0x2  0x0   /* RxD5 */
+					0x5  0x1b 0x2  0x0  0x2  0x0   /* RxD6 */
+					0x5  0x1a 0x2  0x0  0x2  0x0   /* RxD7 */
+					0x5  0xb 0x1  0x0  0x2  0x0   /* TX_EN */
+					0x5  0x18 0x1  0x0  0x2  0x0   /* TX_ER */
+					0x5  0x10 0x2  0x0  0x2  0x0   /* RX_DV */
+					0x5  0x1e 0x2  0x0  0x2  0x0   /* RX_ER */
+					0x5  0x11 0x2  0x0  0x2  0x0   /* RX_CLK */
+					0x5  0x13 0x1  0x0  0x2  0x0   /* GTX_CLK */
+					0x1  0x1f 0x2  0x0  0x3  0x0   /* GTX125 */
+					0x4  0x6 0x3  0x0  0x2  0x0   /* MDIO */
+					0x4  0x5 0x1  0x0  0x2  0x0>; /* MDC */
+			};
+		};
+	};
+
+	qe: qe@e0080000 {
+		ranges = <0x0 0x0 0xe0080000 0x40000>;
+		reg = <0x0 0xe0080000 0x0 0x480>;
+
+		spi@4c0 {
+			mode = "cpu";
+		};
+
+		spi@500 {
+			mode = "cpu";
+		};
+
+		enet2: ucc@2000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk16";
+			pio-handle = <&pio1>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet3: ucc@3000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk16";
+			pio-handle = <&pio2>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@2120 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2120 0x18>;
+			compatible = "fsl,ucc-mdio";
+
+			/* These are the same PHYs as on
+			 * gianfar's MDIO bus */
+			qe_phy0: ethernet-phy@07 {
+				interrupt-parent = <&mpic>;
+				interrupts = <1 1 0 0>;
+				reg = <0x7>;
+			};
+			qe_phy1: ethernet-phy@01 {
+				interrupt-parent = <&mpic>;
+				interrupts = <2 1 0 0>;
+				reg = <0x1>;
+			};
+			qe_phy2: ethernet-phy@02 {
+				interrupt-parent = <&mpic>;
+				interrupts = <1 1 0 0>;
+				reg = <0x2>;
+			};
+			qe_phy3: ethernet-phy@03 {
+				interrupt-parent = <&mpic>;
+				interrupts = <2 1 0 0>;
+				reg = <0x3>;
+			};
+		};
+	};
+
+	pci0: pci@e0008000 {
+		reg = <0x0 0xe0008000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xe2000000 0x0 0x800000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x12 AD18 */
+			0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 0 0
+			0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 0 0
+			0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 0 0
+			0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 0 0
+
+			/* IDSEL 0x13 AD19 */
+			0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 0 0
+			0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 0 0
+			0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x9800 0x0 0x0 0x4 &mpic 0x5 0x1 0 0>;
+	};
+
+	/* PCI Express */
+	pci1: pcie@e000a000 {
+		ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0x0 0xe2800000 0x0 0x800000>;
+		reg = <0x0 0xe000a000 0x0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x10000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x800000>;
+		};
+	};
+
+	rio: rapidio@e00c00000 {
+		reg = <0x0 0xe00c0000 0x0 0x20000>;
+		port1 {
+			ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			gpios = <&bcsr5 1 0>;
+		};
+
+		amber {
+			gpios = <&bcsr5 2 0>;
+		};
+
+		red {
+			gpios = <&bcsr5 3 0>;
+		};
+	};
+};
+
+/include/ "mpc8568si-post.dtsi"
diff --git a/src/powerpc/fsl/mpc8568si-post.dtsi b/src/powerpc/fsl/mpc8568si-post.dtsi
new file mode 100644
index 000000000000..64e7075a9cd4
--- /dev/null
+++ b/src/powerpc/fsl/mpc8568si-post.dtsi
@@ -0,0 +1,270 @@
+/*
+ * MPC8568 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus", "simple-bus";
+	interrupts = <19 2 0 0>;
+	sleep = <&pmc 0x08000000>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+	compatible = "fsl,mpc8540-pci";
+	device_type = "pci";
+	interrupts = <24 0x2 0 0>;
+	bus-range = <0 0xff>;
+	#interrupt-cells = <1>;
+	#size-cells = <2>;
+	#address-cells = <3>;
+	sleep = <&pmc 0x80000000>;
+};
+
+/* controller at 0xa000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <26 2 0 0>;
+	sleep = <&pmc 0x20000000>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <26 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <48 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,srio-rmu-handle = <&rmu>;
+	sleep = <&pmc 0x00080000>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,mpc8568-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <10>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,mpc8568-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,mpc8568-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+	i2c-sleep-nexus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		sleep = <&pmc 0x00000004>;
+		ranges;
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+
+	};
+
+	duart-sleep-nexus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		sleep = <&pmc 0x00000002>;
+		ranges;
+
+/include/ "pq3-duart-0.dtsi"
+
+	};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,mpc8568-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x80000>; // L2, 512K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+	dma@21300 {
+		sleep = <&pmc 0x00000400>;
+	};
+
+/include/ "pq3-etsec1-0.dtsi"
+	ethernet@24000 {
+		sleep = <&pmc 0x00000080>;
+	};
+
+/include/ "pq3-etsec1-1.dtsi"
+	ethernet@25000 {
+		sleep = <&pmc 0x00000040>;
+	};
+
+	par_io@e0100 {
+		reg = <0xe0100 0x100>;
+		device_type = "par_io";
+	};
+
+/include/ "pq3-sec2.1-0.dtsi"
+	crypto@30000 {
+		sleep = <&pmc 0x01000000>;
+	};
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-rmu-0.dtsi"
+	rmu@d3000 {
+		sleep = <&pmc 0x00040000>;
+	};
+
+	global-utilities@e0000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts";
+		reg = <0xe0000 0x1000>;
+		ranges = <0 0xe0000 0x1000>;
+		fsl,has-rstcr;
+
+		pmc: power@70 {
+			compatible = "fsl,mpc8568-pmc",
+				     "fsl,mpc8548-pmc";
+			reg = <0x70 0x20>;
+		};
+	};
+};
+
+&qe {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "qe";
+	compatible = "fsl,qe";
+	sleep = <&pmc 0x00000800>;
+	brg-frequency = <0>;
+	bus-frequency = <396000000>;
+	fsl,qe-num-riscs = <2>;
+	fsl,qe-num-snums = <28>;
+
+	qeic: interrupt-controller@80 {
+		interrupt-controller;
+		compatible = "fsl,qe-ic";
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30
+		interrupt-parent = <&mpic>;
+	};
+
+	spi@4c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,spi";
+		reg = <0x4c0 0x40>;
+		cell-index = <0>;
+		interrupts = <2>;
+		interrupt-parent = <&qeic>;
+	};
+
+	spi@500 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cell-index = <1>;
+		compatible = "fsl,spi";
+		reg = <0x500 0x40>;
+		interrupts = <1>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@2000 {
+		cell-index = <1>;
+		reg = <0x2000 0x200>;
+		interrupts = <32>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@3000 {
+		cell-index = <2>;
+		reg = <0x3000 0x200>;
+		interrupts = <33>;
+		interrupt-parent = <&qeic>;
+	};
+
+	muram@10000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,qe-muram", "fsl,cpm-muram";
+		ranges = <0x0 0x10000 0x10000>;
+
+		data-only@0 {
+			compatible = "fsl,qe-muram-data",
+				     "fsl,cpm-muram-data";
+			reg = <0x0 0x10000>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/mpc8568si-pre.dtsi b/src/powerpc/fsl/mpc8568si-pre.dtsi
new file mode 100644
index 000000000000..122ca3bd0b03
--- /dev/null
+++ b/src/powerpc/fsl/mpc8568si-pre.dtsi
@@ -0,0 +1,68 @@
+/*
+ * MPC8568 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,MPC8568";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8568@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+			sleep = <&pmc 0x00008000	// core
+				 &pmc 0x00004000>;	// timebase
+		};
+	};
+};
diff --git a/src/powerpc/fsl/mpc8569mds.dts b/src/powerpc/fsl/mpc8569mds.dts
new file mode 100644
index 000000000000..8e94448f296c
--- /dev/null
+++ b/src/powerpc/fsl/mpc8569mds.dts
@@ -0,0 +1,447 @@
+/*
+ * MPC8569E MDS Device Tree Source
+ *
+ * Copyright (C) 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc8569si-pre.dtsi"
+
+/ {
+	model = "MPC8569EMDS";
+	compatible = "fsl,MPC8569EMDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet5 = &enet5;
+		ethernet7 = &enet7;
+		rapidio0 = &rio;
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@e0005000 {
+		reg = <0x0 0xe0005000 0x0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xfe000000 0x02000000
+			  0x1 0x0 0x0 0xf8000000 0x00008000
+			  0x2 0x0 0x0 0xf0000000 0x04000000
+			  0x3 0x0 0x0 0xfc000000 0x00008000
+			  0x4 0x0 0x0 0xf8008000 0x00008000
+			  0x5 0x0 0x0 0xf8010000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x02000000>;
+			bank-width = <1>;
+			device-width = <1>;
+			partition@0 {
+				label = "ramdisk";
+				reg = <0x00000000 0x01c00000>;
+			};
+			partition@1c00000 {
+				label = "kernel";
+				reg = <0x01c00000 0x002e0000>;
+			};
+			partiton@1ee0000 {
+				label = "dtb";
+				reg = <0x01ee0000 0x00020000>;
+			};
+			partition@1f00000 {
+				label = "firmware";
+				reg = <0x01f00000 0x00080000>;
+				read-only;
+			};
+			partition@1f80000 {
+				label = "u-boot";
+				reg = <0x01f80000 0x00080000>;
+				read-only;
+			};
+		};
+
+		bcsr@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8569mds-bcsr";
+			reg = <1 0 0x8000>;
+			ranges = <0 1 0 0x8000>;
+
+			bcsr17: gpio-controller@11 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8569mds-bcsr-gpio";
+				reg = <0x11 0x1>;
+				gpio-controller;
+			};
+		};
+
+		nand@3,0 {
+			compatible = "fsl,mpc8569-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <3 0 0x8000>;
+		};
+
+		pib@4,0 {
+			compatible = "fsl,mpc8569mds-pib";
+			reg = <4 0 0x8000>;
+		};
+
+		pib@5,0 {
+			compatible = "fsl,mpc8569mds-pib";
+			reg = <5 0 0x8000>;
+		};
+	};
+
+	soc: soc@e0000000 {
+		ranges = <0x0 0x0 0xe0000000 0x100000>;
+
+		i2c-sleep-nexus {
+			i2c@3000 {
+				rtc@68 {
+					compatible = "dallas,ds1374";
+					reg = <0x68>;
+					interrupts = <3 1 0 0>;
+				};
+			};
+		};
+
+		sdhc@2e000 {
+			status = "disabled";
+			sdhci,1-bit-only;
+			bus-width = <1>;
+		};
+
+		par_io@e0100 {
+			num-ports = <7>;
+
+			qe_pio_e: gpio-controller@80 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8569-qe-pario-bank",
+					     "fsl,mpc8323-qe-pario-bank";
+				reg = <0x80 0x18>;
+				gpio-controller;
+			};
+
+			qe_pio_f: gpio-controller@a0 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8569-qe-pario-bank",
+					     "fsl,mpc8323-qe-pario-bank";
+				reg = <0xa0 0x18>;
+				gpio-controller;
+			};
+
+			pio1: ucc_pin@01 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
+					0x2  0x1e 0x3  0x0  0x2  0x0	/* QE_MUX_MDIO */
+					0x2  0x0b 0x2  0x0  0x1  0x0	/* CLK12*/
+					0x0  0x0  0x1  0x0  0x3  0x0	/* ENET1_TXD0_SER1_TXD0 */
+					0x0  0x1  0x1  0x0  0x3  0x0	/* ENET1_TXD1_SER1_TXD1 */
+					0x0  0x2  0x1  0x0  0x1  0x0	/* ENET1_TXD2_SER1_TXD2 */
+					0x0  0x3  0x1  0x0  0x2  0x0	/* ENET1_TXD3_SER1_TXD3 */
+					0x0  0x6  0x2  0x0  0x3  0x0	/* ENET1_RXD0_SER1_RXD0	*/
+					0x0  0x7  0x2  0x0  0x1  0x0	/* ENET1_RXD1_SER1_RXD1	*/
+					0x0  0x8  0x2  0x0  0x2  0x0	/* ENET1_RXD2_SER1_RXD2	*/
+					0x0  0x9  0x2  0x0  0x2  0x0	/* ENET1_RXD3_SER1_RXD3	*/
+					0x0  0x4  0x1  0x0  0x2  0x0	/* ENET1_TX_EN_SER1_RTS_B */
+					0x0  0xc  0x2  0x0  0x3  0x0	/* ENET1_RX_DV_SER1_CTS_B */
+					0x2  0x8  0x2  0x0  0x1  0x0	/* ENET1_GRXCLK	*/
+					0x2  0x14 0x1  0x0  0x2  0x0>;	/* ENET1_GTXCLK	*/
+			};
+
+			pio2: ucc_pin@02 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
+					0x2  0x1e 0x3  0x0  0x2  0x0	/* QE_MUX_MDIO */
+					0x2  0x10 0x2  0x0  0x3  0x0	/* CLK17 */
+					0x0  0xe  0x1  0x0  0x2  0x0	/* ENET2_TXD0_SER2_TXD0 */
+					0x0  0xf  0x1  0x0  0x2  0x0	/* ENET2_TXD1_SER2_TXD1 */
+					0x0  0x10 0x1  0x0  0x1  0x0	/* ENET2_TXD2_SER2_TXD2 */
+					0x0  0x11 0x1  0x0  0x1  0x0	/* ENET2_TXD3_SER2_TXD3 */
+					0x0  0x14 0x2  0x0  0x2  0x0	/* ENET2_RXD0_SER2_RXD0	*/
+					0x0  0x15 0x2  0x0  0x1  0x0	/* ENET2_RXD1_SER2_RXD1	*/
+					0x0  0x16 0x2  0x0  0x1  0x0	/* ENET2_RXD2_SER2_RXD2	*/
+					0x0  0x17 0x2  0x0  0x1  0x0	/* ENET2_RXD3_SER2_RXD3	*/
+					0x0  0x12 0x1  0x0  0x2  0x0	/* ENET2_TX_EN_SER2_RTS_B */
+					0x0  0x1a 0x2  0x0  0x3  0x0	/* ENET2_RX_DV_SER2_CTS_B */
+					0x2  0x3  0x2  0x0  0x1  0x0	/* ENET2_GRXCLK	*/
+					0x2  0x2 0x1  0x0  0x2  0x0>;	/* ENET2_GTXCLK	*/
+			};
+
+			pio3: ucc_pin@03 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
+					0x2  0x1e 0x3  0x0  0x2  0x0	/* QE_MUX_MDIO */
+					0x2  0x0b 0x2  0x0  0x1  0x0	/* CLK12*/
+					0x0  0x1d 0x1  0x0  0x2  0x0	/* ENET3_TXD0_SER3_TXD0 */
+					0x0  0x1e 0x1  0x0  0x3  0x0	/* ENET3_TXD1_SER3_TXD1 */
+					0x0  0x1f 0x1  0x0  0x2  0x0	/* ENET3_TXD2_SER3_TXD2 */
+					0x1  0x0  0x1  0x0  0x3  0x0	/* ENET3_TXD3_SER3_TXD3 */
+					0x1  0x3  0x2  0x0  0x3  0x0	/* ENET3_RXD0_SER3_RXD0	*/
+					0x1  0x4  0x2  0x0  0x1  0x0	/* ENET3_RXD1_SER3_RXD1	*/
+					0x1  0x5  0x2  0x0  0x2  0x0	/* ENET3_RXD2_SER3_RXD2	*/
+					0x1  0x6  0x2  0x0  0x3  0x0	/* ENET3_RXD3_SER3_RXD3	*/
+					0x1  0x1  0x1  0x0  0x1  0x0	/* ENET3_TX_EN_SER3_RTS_B */
+					0x1  0x9  0x2  0x0  0x3  0x0	/* ENET3_RX_DV_SER3_CTS_B */
+					0x2  0x9  0x2  0x0  0x2  0x0	/* ENET3_GRXCLK	*/
+					0x2  0x19 0x1  0x0  0x2  0x0>;	/* ENET3_GTXCLK	*/
+			};
+
+			pio4: ucc_pin@04 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
+					0x2  0x1e 0x3  0x0  0x2  0x0	/* QE_MUX_MDIO */
+					0x2  0x10 0x2  0x0  0x3  0x0	/* CLK17 */
+					0x1  0xc  0x1  0x0  0x2  0x0	/* ENET4_TXD0_SER4_TXD0 */
+					0x1  0xd  0x1  0x0  0x2  0x0	/* ENET4_TXD1_SER4_TXD1 */
+					0x1  0xe  0x1  0x0  0x1  0x0	/* ENET4_TXD2_SER4_TXD2 */
+					0x1  0xf  0x1  0x0  0x2  0x0	/* ENET4_TXD3_SER4_TXD3 */
+					0x1  0x12 0x2  0x0  0x2  0x0	/* ENET4_RXD0_SER4_RXD0	*/
+					0x1  0x13 0x2  0x0  0x1  0x0	/* ENET4_RXD1_SER4_RXD1	*/
+					0x1  0x14 0x2  0x0  0x1  0x0	/* ENET4_RXD2_SER4_RXD2	*/
+					0x1  0x15 0x2  0x0  0x2  0x0	/* ENET4_RXD3_SER4_RXD3	*/
+					0x1  0x10 0x1  0x0  0x2  0x0	/* ENET4_TX_EN_SER4_RTS_B */
+					0x1  0x18 0x2  0x0  0x3  0x0	/* ENET4_RX_DV_SER4_CTS_B */
+					0x2  0x11 0x2  0x0  0x2  0x0	/* ENET4_GRXCLK	*/
+					0x2  0x18 0x1  0x0  0x2  0x0>;	/* ENET4_GTXCLK	*/
+			};
+		};
+	};
+
+	qe: qe@e0080000 {
+		ranges = <0x0 0x0 0xe0080000 0x40000>;
+		reg = <0x0 0xe0080000 0x0 0x480>;
+
+		spi@4c0 {
+			gpios = <&qe_pio_e 30 0>;
+			mode = "cpu-qe";
+
+			serial-flash@0 {
+				compatible = "st,m25p40";
+				reg = <0>;
+				spi-max-frequency = <25000000>;
+			};
+		};
+
+		spi@500 {
+			mode = "cpu";
+		};
+
+		usb@6c0 {
+			fsl,fullspeed-clock = "clk5";
+			fsl,lowspeed-clock = "brg10";
+			gpios = <&qe_pio_f 3 0   /* USBOE */
+				 &qe_pio_f 4 0   /* USBTP */
+				 &qe_pio_f 5 0   /* USBTN */
+				 &qe_pio_f 6 0   /* USBRP */
+				 &qe_pio_f 8 0   /* USBRN */
+				 &bcsr17   1 0   /* SPEED */
+				 &bcsr17   2 0>; /* POWER */
+		};
+
+		enet0: ucc@2000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk12";
+			pio-handle = <&pio1>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&qe_phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@2120 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2120 0x18>;
+			compatible = "fsl,ucc-mdio";
+
+			qe_phy0: ethernet-phy@07 {
+				interrupt-parent = <&mpic>;
+				interrupts = <1 1 0 0>;
+				reg = <0x7>;
+			};
+			qe_phy1: ethernet-phy@01 {
+				interrupt-parent = <&mpic>;
+				interrupts = <2 1 0 0>;
+				reg = <0x1>;
+			};
+			qe_phy2: ethernet-phy@02 {
+				interrupt-parent = <&mpic>;
+				interrupts = <3 1 0 0>;
+				reg = <0x2>;
+			};
+			qe_phy3: ethernet-phy@03 {
+				interrupt-parent = <&mpic>;
+				interrupts = <4 1 0 0>;
+				reg = <0x3>;
+			};
+			qe_phy5: ethernet-phy@04 {
+				reg = <0x04>;
+			};
+			qe_phy7: ethernet-phy@06 {
+				reg = <0x6>;
+			};
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+		mdio@3520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3520 0x18>;
+			compatible = "fsl,ucc-mdio";
+
+			tbi6: tbi-phy@15 {
+			reg = <0x15>;
+			device_type = "tbi-phy";
+			};
+		};
+		mdio@3720 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3720 0x38>;
+			compatible = "fsl,ucc-mdio";
+			tbi8: tbi-phy@17 {
+				reg = <0x17>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet2: ucc@2200 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk12";
+			pio-handle = <&pio3>;
+			tbi-handle = <&tbi3>;
+			phy-handle = <&qe_phy2>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@2320 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2320 0x18>;
+			compatible = "fsl,ucc-mdio";
+			tbi3: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet1: ucc@3000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk17";
+			pio-handle = <&pio2>;
+			tbi-handle = <&tbi2>;
+			phy-handle = <&qe_phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@3120 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3120 0x18>;
+			compatible = "fsl,ucc-mdio";
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet3: ucc@3200 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk17";
+			pio-handle = <&pio4>;
+			tbi-handle = <&tbi4>;
+			phy-handle = <&qe_phy3>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@3320 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3320 0x18>;
+			compatible = "fsl,ucc-mdio";
+			tbi4: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet5: ucc@3400 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "none";
+			tbi-handle = <&tbi6>;
+			phy-handle = <&qe_phy5>;
+			phy-connection-type = "sgmii";
+		};
+
+		enet7: ucc@3600 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "none";
+			tbi-handle = <&tbi8>;
+			phy-handle = <&qe_phy7>;
+			phy-connection-type = "sgmii";
+		};
+	};
+
+	/* PCI Express */
+	pci1: pcie@e000a000 {
+		reg = <0x0 0xe000a000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x00800000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x10000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x800000>;
+		};
+	};
+
+	rio: rapidio@e00c00000 {
+		reg = <0x0 0xe00c0000 0x0 0x20000>;
+		port1 {
+			ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
+		};
+		port2 {
+			status = "disabled";
+		};
+	};
+};
+
+/include/ "mpc8569si-post.dtsi"
diff --git a/src/powerpc/fsl/mpc8569si-post.dtsi b/src/powerpc/fsl/mpc8569si-post.dtsi
new file mode 100644
index 000000000000..3e6346a4a183
--- /dev/null
+++ b/src/powerpc/fsl/mpc8569si-post.dtsi
@@ -0,0 +1,304 @@
+/*
+ * MPC8569 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <19 2 0 0>;
+	sleep = <&pmc 0x08000000>;
+};
+
+/* controller at 0xa000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <26 2 0 0>;
+	sleep = <&pmc 0x20000000>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <26 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <48 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,srio-rmu-handle = <&rmu>;
+	sleep = <&pmc 0x00080000>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,mpc8569-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <10>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,mpc8569-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,mpc8569-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+	i2c-sleep-nexus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		sleep = <&pmc 0x00000004>;
+		ranges;
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+
+	};
+
+	duart-sleep-nexus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		sleep = <&pmc 0x00000002>;
+		ranges;
+
+/include/ "pq3-duart-0.dtsi"
+
+	};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,mpc8569-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x80000>; // L2, 512K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		sleep = <&pmc 0x00200000>;
+	};
+
+	par_io@e0100 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xe0100 0x100>;
+		ranges = <0x0 0xe0100 0x100>;
+		device_type = "par_io";
+	};
+
+/include/ "pq3-sec3.1-0.dtsi"
+	crypto@30000 {
+		sleep = <&pmc 0x01000000>;
+	};
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-rmu-0.dtsi"
+	rmu@d3000 {
+		sleep = <&pmc 0x00040000>;
+	};
+
+	global-utilities@e0000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8569-guts", "fsl,mpc8548-guts";
+		reg = <0xe0000 0x1000>;
+		ranges = <0 0xe0000 0x1000>;
+		fsl,has-rstcr;
+
+		pmc: power@70 {
+			compatible = "fsl,mpc8569-pmc",
+				     "fsl,mpc8548-pmc";
+			reg = <0x70 0x20>;
+		};
+	};
+};
+
+&qe {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "qe";
+	compatible = "fsl,qe";
+	sleep = <&pmc 0x00000800>;
+	brg-frequency = <0>;
+	bus-frequency = <0>;
+	fsl,qe-num-riscs = <4>;
+	fsl,qe-num-snums = <46>;
+
+	qeic: interrupt-controller@80 {
+		interrupt-controller;
+		compatible = "fsl,qe-ic";
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30
+		interrupt-parent = <&mpic>;
+	};
+
+	timer@440 {
+		compatible = "fsl,mpc8569-qe-gtm",
+			     "fsl,qe-gtm", "fsl,gtm";
+		reg = <0x440 0x40>;
+		interrupts = <12 13 14 15>;
+		interrupt-parent = <&qeic>;
+		/* Filled in by U-Boot */
+		clock-frequency = <0>;
+	};
+
+	spi@4c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mpc8569-qe-spi", "fsl,spi";
+		reg = <0x4c0 0x40>;
+		cell-index = <0>;
+		interrupts = <2>;
+		interrupt-parent = <&qeic>;
+	};
+
+	spi@500 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cell-index = <1>;
+		compatible = "fsl,spi";
+		reg = <0x500 0x40>;
+		interrupts = <1>;
+		interrupt-parent = <&qeic>;
+	};
+
+	usb@6c0 {
+		compatible = "fsl,mpc8569-qe-usb",
+			     "fsl,mpc8323-qe-usb";
+		reg = <0x6c0 0x40 0x8b00 0x100>;
+		interrupts = <11>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@2000 {
+		cell-index = <1>;
+		reg = <0x2000 0x200>;
+		interrupts = <32>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@2200 {
+		cell-index = <3>;
+		reg = <0x2200 0x200>;
+		interrupts = <34>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@3000 {
+		cell-index = <2>;
+		reg = <0x3000 0x200>;
+		interrupts = <33>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@3200 {
+		cell-index = <4>;
+		reg = <0x3200 0x200>;
+		interrupts = <35>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@3400 {
+		cell-index = <6>;
+		reg = <0x3400 0x200>;
+		interrupts = <41>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@3600 {
+		cell-index = <8>;
+		reg = <0x3600 0x200>;
+		interrupts = <43>;
+		interrupt-parent = <&qeic>;
+	};
+
+	muram@10000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,qe-muram", "fsl,cpm-muram";
+		ranges = <0x0 0x10000 0x20000>;
+
+		data-only@0 {
+			compatible = "fsl,qe-muram-data",
+				     "fsl,cpm-muram-data";
+			reg = <0x0 0x20000>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/mpc8569si-pre.dtsi b/src/powerpc/fsl/mpc8569si-pre.dtsi
new file mode 100644
index 000000000000..2cd15a2a0422
--- /dev/null
+++ b/src/powerpc/fsl/mpc8569si-pre.dtsi
@@ -0,0 +1,67 @@
+/*
+ * MPC8569 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,MPC8569";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8569@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+			sleep = <&pmc 0x00008000	// core
+				 &pmc 0x00004000>;	// timebase
+		};
+	};
+};
diff --git a/src/powerpc/fsl/mpc8572ds.dts b/src/powerpc/fsl/mpc8572ds.dts
new file mode 100644
index 000000000000..8ee5b24cc59e
--- /dev/null
+++ b/src/powerpc/fsl/mpc8572ds.dts
@@ -0,0 +1,90 @@
+/*
+ * MPC8572 DS Device Tree Source
+ *
+ * Copyright 2007-2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc8572si-pre.dtsi"
+
+/ {
+	model = "fsl,MPC8572DS";
+	compatible = "fsl,MPC8572DS";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_lbc: lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
+			  0x1 0x0 0x0 0xe0000000 0x08000000
+			  0x2 0x0 0x0 0xffa00000 0x00040000
+			  0x3 0x0 0x0 0xffdf0000 0x00008000
+			  0x4 0x0 0x0 0xffa40000 0x00040000
+			  0x5 0x0 0x0 0xffa80000 0x00040000
+			  0x6 0x0 0x0 0xffac0000 0x00040000>;
+	};
+
+	board_soc: soc: soc8572@ffe00000 {
+		ranges = <0x0 0 0xffe00000 0x100000>;
+	};
+
+	board_pci0: pci0: pcie@ffe08000 {
+		reg = <0 0xffe08000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	pci1: pcie@ffe09000 {
+		reg = <0 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	pci2: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+};
+
+/*
+ * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "mpc8572si-post.dtsi"
+/include/ "mpc8572ds.dtsi"
diff --git a/src/powerpc/fsl/mpc8572ds.dtsi b/src/powerpc/fsl/mpc8572ds.dtsi
new file mode 100644
index 000000000000..357490bb84da
--- /dev/null
+++ b/src/powerpc/fsl/mpc8572ds.dtsi
@@ -0,0 +1,428 @@
+/*
+ * MPC8572DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			reg = <0x0 0x03000000>;
+			label = "ramdisk-nor";
+		};
+
+		partition@3000000 {
+			reg = <0x03000000 0x00e00000>;
+			label = "diagnostic-nor";
+			read-only;
+		};
+
+		partition@3e00000 {
+			reg = <0x03e00000 0x00200000>;
+			label = "dink-nor";
+			read-only;
+		};
+
+		partition@4000000 {
+			reg = <0x04000000 0x00400000>;
+			label = "kernel-nor";
+		};
+
+		partition@4400000 {
+			reg = <0x04400000 0x03b00000>;
+			label = "fs-nor";
+		};
+
+		partition@7f00000 {
+			reg = <0x07f00000 0x00060000>;
+			label = "dtb-nor";
+		};
+
+		partition@7f60000 {
+			reg = <0x07f60000 0x00020000>;
+			label = "env-nor";
+			read-only;
+		};
+
+		partition@7f80000 {
+			reg = <0x07f80000 0x00080000>;
+			label = "u-boot-nor";
+			read-only;
+		};
+	};
+
+	nand@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8572-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x2 0x0 0x40000>;
+
+		partition@0 {
+			reg = <0x0 0x02000000>;
+			label = "u-boot-nand";
+			read-only;
+		};
+
+		partition@2000000 {
+			reg = <0x02000000 0x10000000>;
+			label = "fs-nand";
+		};
+
+		partition@12000000 {
+			reg = <0x12000000 0x08000000>;
+			label = "ramdisk-nand";
+		};
+
+		partition@1a000000 {
+			reg = <0x1a000000 0x04000000>;
+			label = "kernel-nand";
+		};
+
+		partition@1e000000 {
+			reg = <0x1e000000 0x01000000>;
+			label = "dtb-nand";
+		};
+
+		partition@1f000000 {
+			reg = <0x1f000000 0x21000000>;
+			label = "empty-nand";
+		};
+	};
+
+	nand@4,0 {
+		compatible = "fsl,mpc8572-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x4 0x0 0x40000>;
+	};
+
+	nand@5,0 {
+		compatible = "fsl,mpc8572-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x5 0x0 0x40000>;
+	};
+
+	nand@6,0 {
+		compatible = "fsl,mpc8572-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x6 0x0 0x40000>;
+	};
+};
+
+&board_soc {
+	enet0: ethernet@24000 {
+		tbi-handle = <&tbi0>;
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	mdio@24520 {
+		phy0: ethernet-phy@0 {
+			interrupts = <10 1 0 0>;
+			reg = <0x0>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <10 1 0 0>;
+			reg = <0x1>;
+		};
+		phy2: ethernet-phy@2 {
+			interrupts = <10 1 0 0>;
+			reg = <0x2>;
+		};
+		phy3: ethernet-phy@3 {
+			interrupts = <10 1 0 0>;
+			reg = <0x3>;
+		};
+
+		sgmii_phy0: sgmii-phy@0 {
+			interrupts = <6 1 0 0>;
+			reg = <0x1c>;
+		};
+		sgmii_phy1: sgmii-phy@1 {
+			interrupts = <6 1 0 0>;
+			reg = <0x1d>;
+		};
+		sgmii_phy2: sgmii-phy@2 {
+			interrupts = <7 1 0 0>;
+			reg = <0x1e>;
+		};
+		sgmii_phy3: sgmii-phy@3 {
+			interrupts = <7 1 0 0>;
+			reg = <0x1f>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	ptp_clock@24e00 {
+		fsl,tclk-period = <5>;
+		fsl,tmr-prsc = <200>;
+		fsl,tmr-add = <0xAAAAAAAB>;
+		fsl,tmr-fiper1 = <0x3B9AC9FB>;
+		fsl,tmr-fiper2 = <0x3B9AC9FB>;
+		fsl,max-adj = <499999999>;
+	};
+
+	enet1: ethernet@25000 {
+		tbi-handle = <&tbi1>;
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	mdio@25520 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet2: ethernet@26000 {
+		tbi-handle = <&tbi2>;
+		phy-handle = <&phy2>;
+		phy-connection-type = "rgmii-id";
+
+	};
+	mdio@26520 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet3: ethernet@27000 {
+		tbi-handle = <&tbi3>;
+		phy-handle = <&phy3>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	mdio@27520 {
+		tbi3: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+};
+
+&board_pci0 {
+	pcie@0 {
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x11 func 0 - PCI slot 1 */
+			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x11 func 1 - PCI slot 1 */
+			0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x11 func 2 - PCI slot 1 */
+			0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x11 func 3 - PCI slot 1 */
+			0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x11 func 4 - PCI slot 1 */
+			0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x11 func 5 - PCI slot 1 */
+			0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x11 func 6 - PCI slot 1 */
+			0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x11 func 7 - PCI slot 1 */
+			0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x12 func 0 - PCI slot 2 */
+			0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+			/* IDSEL 0x12 func 1 - PCI slot 2 */
+			0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+			/* IDSEL 0x12 func 2 - PCI slot 2 */
+			0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+			/* IDSEL 0x12 func 3 - PCI slot 2 */
+			0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+			/* IDSEL 0x12 func 4 - PCI slot 2 */
+			0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+			/* IDSEL 0x12 func 5 - PCI slot 2 */
+			0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+			/* IDSEL 0x12 func 6 - PCI slot 2 */
+			0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+			/* IDSEL 0x12 func 7 - PCI slot 2 */
+			0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+			// IDSEL 0x1c  USB
+			0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+			0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+			0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+			0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
+
+			// IDSEL 0x1d  Audio
+			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+			// IDSEL 0x1e Legacy
+			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+			// IDSEL 0x1f IDE/SATA
+			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+			>;
+
+
+		uli1575@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+			isa@1e {
+				device_type = "isa";
+				#interrupt-cells = <2>;
+				#size-cells = <1>;
+				#address-cells = <2>;
+				reg = <0xf000 0x0 0x0 0x0 0x0>;
+				ranges = <0x1 0x0 0x1000000 0x0 0x0
+					  0x1000>;
+				interrupt-parent = <&i8259>;
+
+				i8259: interrupt-controller@20 {
+					reg = <0x1 0x20 0x2
+					       0x1 0xa0 0x2
+					       0x1 0x4d0 0x2>;
+					interrupt-controller;
+					device_type = "interrupt-controller";
+					#address-cells = <0>;
+					#interrupt-cells = <2>;
+					compatible = "chrp,iic";
+					interrupts = <9 2 0 0>;
+					interrupt-parent = <&mpic>;
+				};
+
+				i8042@60 {
+					#size-cells = <0>;
+					#address-cells = <1>;
+					reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+					interrupts = <1 3 12 3>;
+					interrupt-parent =
+						<&i8259>;
+
+					keyboard@0 {
+						reg = <0x0>;
+						compatible = "pnpPNP,303";
+					};
+
+					mouse@1 {
+						reg = <0x1>;
+						compatible = "pnpPNP,f03";
+					};
+				};
+
+				rtc@70 {
+					compatible = "pnpPNP,b00";
+					reg = <0x1 0x70 0x2>;
+				};
+
+				gpio@400 {
+					reg = <0x1 0x400 0x80>;
+				};
+			};
+		};
+	};
+};
diff --git a/src/powerpc/fsl/mpc8572ds_36b.dts b/src/powerpc/fsl/mpc8572ds_36b.dts
new file mode 100644
index 000000000000..5c48b464669b
--- /dev/null
+++ b/src/powerpc/fsl/mpc8572ds_36b.dts
@@ -0,0 +1,90 @@
+/*
+ * MPC8572DS Device Tree Source (36-bit address map)
+ *
+ * Copyright 2007-2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc8572si-pre.dtsi"
+
+/ {
+	model = "fsl,MPC8572DS";
+	compatible = "fsl,MPC8572DS";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_lbc: lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+
+		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
+			  0x1 0x0 0xf 0xe0000000 0x08000000
+			  0x2 0x0 0xf 0xffa00000 0x00040000
+			  0x3 0x0 0xf 0xffdf0000 0x00008000
+			  0x4 0x0 0xf 0xffa40000 0x00040000
+			  0x5 0x0 0xf 0xffa80000 0x00040000
+			  0x6 0x0 0xf 0xffac0000 0x00040000>;
+	};
+
+	board_soc: soc: soc8572@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	board_pci0: pci0: pcie@fffe08000 {
+		reg = <0xf 0xffe08000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	pci1: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	pci2: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+};
+
+/*
+ * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "mpc8572si-post.dtsi"
+/include/ "mpc8572ds.dtsi"
diff --git a/src/powerpc/fsl/mpc8572ds_camp_core0.dts b/src/powerpc/fsl/mpc8572ds_camp_core0.dts
new file mode 100644
index 000000000000..ef9ef56b3eeb
--- /dev/null
+++ b/src/powerpc/fsl/mpc8572ds_camp_core0.dts
@@ -0,0 +1,82 @@
+/*
+ * MPC8572 DS Core0 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts file allows core0 to have memory, l2, i2c, dma1, global-util, eth0,
+ * eth1, crypto, pci0, pci1.
+ *
+ * Copyright 2007-2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc8572ds.dts"
+
+/ {
+	model = "fsl,MPC8572DS";
+	compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
+
+	cpus {
+		PowerPC,8572@0 {
+		};
+		PowerPC,8572@1 {
+			status = "disabled";
+		};
+	};
+
+	localbus@ffe05000 {
+		status = "disabled";
+	};
+
+	soc8572@ffe00000 {
+		serial@4600 {
+			status = "disabled";
+		};
+		dma@c300 {
+			status = "disabled";
+		};
+		gpio-controller@f000 {
+		};
+		l2-cache-controller@20000 {
+			cache-size = <0x80000>;	// L2, 512K
+		};
+		ethernet@26000 {
+			status = "disabled";
+		};
+		mdio@26520 {
+			status = "disabled";
+		};
+		ethernet@27000 {
+			status = "disabled";
+		};
+		mdio@27520 {
+			status = "disabled";
+		};
+		pic@40000 {
+			protected-sources = <
+			31 32 33 37 38 39       /* enet2 enet3 */
+			76 77 78 79 26 42	/* dma2 pci2 serial*/
+			0xe4 0xe5 0xe6 0xe7	/* msi */
+			>;
+		};
+
+		msi@41600 {
+			msi-available-ranges = <0 0x80>;
+			interrupts = <
+				0xe0 0 0 0
+				0xe1 0 0 0
+				0xe2 0 0 0
+				0xe3 0 0 0>;
+		};
+		timer@42100 {
+			status = "disabled";
+		};
+	};
+	pcie@ffe0a000 {
+		status = "disabled";
+	};
+};
diff --git a/src/powerpc/fsl/mpc8572ds_camp_core1.dts b/src/powerpc/fsl/mpc8572ds_camp_core1.dts
new file mode 100644
index 000000000000..24564ee108e5
--- /dev/null
+++ b/src/powerpc/fsl/mpc8572ds_camp_core1.dts
@@ -0,0 +1,115 @@
+/*
+ * MPC8572 DS Core1 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts allows core1 to have l2, dma2, eth2, eth3, pci2, msi.
+ *
+ * Please note to add "-b 1" for core1's dts compiling.
+ *
+ * Copyright 2007-2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc8572ds.dts"
+
+/ {
+	model = "fsl,MPC8572DS";
+	compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
+
+	cpus {
+		PowerPC,8572@0 {
+			status = "disabled";
+		};
+		PowerPC,8572@1 {
+		};
+	};
+
+	localbus@ffe05000 {
+		status = "disabled";
+	};
+
+	soc8572@ffe00000 {
+		ecm-law@0 {
+			status = "disabled";
+		};
+		ecm@1000 {
+			status = "disabled";
+		};
+		memory-controller@2000 {
+			status = "disabled";
+		};
+		memory-controller@6000 {
+			status = "disabled";
+		};
+		i2c@3000 {
+			status = "disabled";
+		};
+		i2c@3100 {
+			status = "disabled";
+		};
+		serial@4500 {
+			status = "disabled";
+		};
+		gpio-controller@f000 {
+			status = "disabled";
+		};
+		l2-cache-controller@20000 {
+			cache-size = <0x80000>;	// L2, 512K
+		};
+		dma@21300 {
+			status = "disabled";
+		};
+		ethernet@24000 {
+			status = "disabled";
+		};
+		ptp_clock@24e00 {
+			status = "disabled";
+		};
+		ethernet@25000 {
+			status = "disabled";
+		};
+		mdio@25520 {
+			status = "disabled";
+		};
+		crypto@30000 {
+			status = "disabled";
+		};
+		pic@40000 {
+			protected-sources = <
+			18 16 10 42 45 58	/* MEM L2 mdio serial crypto */
+			29 30 34 35 36 40	/* enet0 enet1 */
+			24 25 20 21 22 23	/* pci0 pci1 dma1 */
+			43			/* i2c */
+			0x1 0x2 0x3 0x4         /* pci slot */
+			0x9 0xa 0xb 0xc         /* usb */
+			0x6 0x7 0xe 0x5         /* Audio elgacy SATA */
+			0xe0 0xe1 0xe2 0xe3	/* msi */
+			>;
+		};
+		timer@41100 {
+			status = "disabled";
+		};
+		msi@41600 {
+			msi-available-ranges = <0x80 0x80>;
+			interrupts = <
+				0xe4 0 0 0
+				0xe5 0 0 0
+				0xe6 0 0 0
+				0xe7 0 0 0>;
+		};
+		global-utilities@e0000 {
+			status = "disabled";
+		};
+	};
+	pcie@ffe08000 {
+		status = "disabled";
+	};
+	pcie@ffe09000 {
+		status = "disabled";
+	};
+};
diff --git a/src/powerpc/fsl/mpc8572si-post.dtsi b/src/powerpc/fsl/mpc8572si-post.dtsi
new file mode 100644
index 000000000000..49294cf36b4e
--- /dev/null
+++ b/src/powerpc/fsl/mpc8572si-post.dtsi
@@ -0,0 +1,196 @@
+/*
+ * MPC8572 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <24 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <24 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0x9000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <25 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <25 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xa000 */
+&pci2 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <26 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <26 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,mpc8572-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,mpc8572-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+	memory-controller@6000 {
+		compatible = "fsl,mpc8572-memory-controller";
+		reg = <0x6000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-dma-1.dtsi"
+/include/ "pq3-gpio-0.dtsi"
+	gpio-controller@f000 {
+		compatible = "fsl,mpc8572-gpio";
+	};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,mpc8572-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x100000>; // L2,1M
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-timer-0.dtsi"
+
+	ptp_clock@24e00 {
+		interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
+	};
+
+/include/ "pq3-etsec1-1.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+/include/ "pq3-etsec1-3.dtsi"
+/include/ "pq3-sec3.0-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+	global-utilities@e0000 {
+		compatible = "fsl,mpc8572-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/src/powerpc/fsl/mpc8572si-pre.dtsi b/src/powerpc/fsl/mpc8572si-pre.dtsi
new file mode 100644
index 000000000000..28c2a862be96
--- /dev/null
+++ b/src/powerpc/fsl/mpc8572si-pre.dtsi
@@ -0,0 +1,73 @@
+/*
+ * MPC8572 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,MPC8572";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8572@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,8572@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/mpc8641_hpcn.dts b/src/powerpc/fsl/mpc8641_hpcn.dts
new file mode 100644
index 000000000000..11bea3e6a43f
--- /dev/null
+++ b/src/powerpc/fsl/mpc8641_hpcn.dts
@@ -0,0 +1,398 @@
+/*
+ * MPC8641 HPCN Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc8641si-pre.dtsi"
+
+/ {
+	model = "MPC8641HPCN";
+	compatible = "fsl,mpc8641hpcn";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;	// 1G at 0x0
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0xffe05000 0x1000>;
+
+		ranges = <0 0 0xef800000 0x00800000
+			  2 0 0xffdf8000 0x00008000
+			  3 0 0xffdf0000 0x00008000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x00800000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00300000>;
+			};
+			partition@300000 {
+				label = "firmware b";
+				reg = <0x00300000 0x00100000>;
+				read-only;
+			};
+			partition@400000 {
+				label = "fs";
+				reg = <0x00400000 0x00300000>;
+			};
+			partition@700000 {
+				label = "firmware a";
+				reg = <0x00700000 0x00100000>;
+				read-only;
+			};
+		};
+	};
+
+	soc: soc8641@ffe00000 {
+		ranges = <0x00000000 0xffe00000 0x00100000>;
+
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@0 {
+				interrupts = <10 1 0 0>;
+				reg = <0>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupts = <10 1 0 0>;
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				interrupts = <10 1 0 0>;
+				reg = <2>;
+			};
+			phy3: ethernet-phy@3 {
+				interrupts = <10 1 0 0>;
+				reg = <3>;
+			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet1: ethernet@25000 {
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@25520 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+		
+		enet2: ethernet@26000 {
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@26520 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet3: ethernet@27000 {
+			tbi-handle = <&tbi3>;
+			phy-handle = <&phy3>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@27520 {
+			tbi3: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		rmu: rmu@d3000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,srio-rmu";
+			reg = <0xd3000 0x500>;
+			ranges = <0x0 0xd3000 0x500>;
+
+			message-unit@0 {
+				compatible = "fsl,srio-msg-unit";
+				reg = <0x0 0x100>;
+				interrupts = <
+					53 2 0 0  /* msg1_tx_irq */
+					54 2 0 0>;/* msg1_rx_irq */
+			};
+			message-unit@100 {
+				compatible = "fsl,srio-msg-unit";
+				reg = <0x100 0x100>;
+				interrupts = <
+					55 2 0 0  /* msg2_tx_irq */
+					56 2 0 0>;/* msg2_rx_irq */
+			};
+			doorbell-unit@400 {
+				compatible = "fsl,srio-dbell-unit";
+				reg = <0x400 0x80>;
+				interrupts = <
+					49 2 0 0  /* bell_outb_irq */
+					50 2 0 0>;/* bell_inb_irq */
+			};
+			port-write-unit@4e0 {
+				compatible = "fsl,srio-port-write-unit";
+				reg = <0x4e0 0x20>;
+				interrupts = <48 2 0 0>;
+			};
+		};
+	};
+
+	pci0: pcie@ffe08000 {
+		reg = <0xffe08000 0x1000>;
+		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xffc00000 0x0 0x00010000>;
+		interrupt-map-mask = <0xff00 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x11 func 0 - PCI slot 1 */
+			0x8800 0 0 1 &mpic 2 1
+			0x8800 0 0 2 &mpic 3 1
+			0x8800 0 0 3 &mpic 4 1
+			0x8800 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 1 - PCI slot 1 */
+			0x8900 0 0 1 &mpic 2 1
+			0x8900 0 0 2 &mpic 3 1
+			0x8900 0 0 3 &mpic 4 1
+			0x8900 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 2 - PCI slot 1 */
+			0x8a00 0 0 1 &mpic 2 1
+			0x8a00 0 0 2 &mpic 3 1
+			0x8a00 0 0 3 &mpic 4 1
+			0x8a00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 3 - PCI slot 1 */
+			0x8b00 0 0 1 &mpic 2 1
+			0x8b00 0 0 2 &mpic 3 1
+			0x8b00 0 0 3 &mpic 4 1
+			0x8b00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 4 - PCI slot 1 */
+			0x8c00 0 0 1 &mpic 2 1
+			0x8c00 0 0 2 &mpic 3 1
+			0x8c00 0 0 3 &mpic 4 1
+			0x8c00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 5 - PCI slot 1 */
+			0x8d00 0 0 1 &mpic 2 1
+			0x8d00 0 0 2 &mpic 3 1
+			0x8d00 0 0 3 &mpic 4 1
+			0x8d00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 6 - PCI slot 1 */
+			0x8e00 0 0 1 &mpic 2 1
+			0x8e00 0 0 2 &mpic 3 1
+			0x8e00 0 0 3 &mpic 4 1
+			0x8e00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 7 - PCI slot 1 */
+			0x8f00 0 0 1 &mpic 2 1
+			0x8f00 0 0 2 &mpic 3 1
+			0x8f00 0 0 3 &mpic 4 1
+			0x8f00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x12 func 0 - PCI slot 2 */
+			0x9000 0 0 1 &mpic 3 1
+			0x9000 0 0 2 &mpic 4 1
+			0x9000 0 0 3 &mpic 1 1
+			0x9000 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 1 - PCI slot 2 */
+			0x9100 0 0 1 &mpic 3 1
+			0x9100 0 0 2 &mpic 4 1
+			0x9100 0 0 3 &mpic 1 1
+			0x9100 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 2 - PCI slot 2 */
+			0x9200 0 0 1 &mpic 3 1
+			0x9200 0 0 2 &mpic 4 1
+			0x9200 0 0 3 &mpic 1 1
+			0x9200 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 3 - PCI slot 2 */
+			0x9300 0 0 1 &mpic 3 1
+			0x9300 0 0 2 &mpic 4 1
+			0x9300 0 0 3 &mpic 1 1
+			0x9300 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 4 - PCI slot 2 */
+			0x9400 0 0 1 &mpic 3 1
+			0x9400 0 0 2 &mpic 4 1
+			0x9400 0 0 3 &mpic 1 1
+			0x9400 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 5 - PCI slot 2 */
+			0x9500 0 0 1 &mpic 3 1
+			0x9500 0 0 2 &mpic 4 1
+			0x9500 0 0 3 &mpic 1 1
+			0x9500 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 6 - PCI slot 2 */
+			0x9600 0 0 1 &mpic 3 1
+			0x9600 0 0 2 &mpic 4 1
+			0x9600 0 0 3 &mpic 1 1
+			0x9600 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 7 - PCI slot 2 */
+			0x9700 0 0 1 &mpic 3 1
+			0x9700 0 0 2 &mpic 4 1
+			0x9700 0 0 3 &mpic 1 1
+			0x9700 0 0 4 &mpic 2 1
+
+			// IDSEL 0x1c  USB
+			0xe000 0 0 1 &i8259 12 2
+			0xe100 0 0 2 &i8259 9 2
+			0xe200 0 0 3 &i8259 10 2
+			0xe300 0 0 4 &i8259 11 2
+
+			// IDSEL 0x1d  Audio
+			0xe800 0 0 1 &i8259 6 2
+
+			// IDSEL 0x1e Legacy
+			0xf000 0 0 1 &i8259 7 2
+			0xf100 0 0 1 &i8259 7 2
+
+			// IDSEL 0x1f IDE/SATA
+			0xf800 0 0 1 &i8259 14 2
+			0xf900 0 0 1 &i8259 5 2
+			>;
+
+		pcie@0 {
+			ranges = <0x02000000 0x0 0x80000000
+				  0x02000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00010000>;
+			uli1575@0 {
+				reg = <0 0 0 0 0>;
+				#size-cells = <2>;
+				#address-cells = <3>;
+				ranges = <0x02000000 0x0 0x80000000
+					  0x02000000 0x0 0x80000000
+					  0x0 0x20000000
+					  0x01000000 0x0 0x00000000
+					  0x01000000 0x0 0x00000000
+					  0x0 0x00010000>;
+				isa@1e {
+					device_type = "isa";
+					#size-cells = <1>;
+					#address-cells = <2>;
+					reg = <0xf000 0 0 0 0>;
+					ranges = <1 0 0x01000000 0 0
+						  0x00001000>;
+					interrupt-parent = <&i8259>;
+
+					i8259: interrupt-controller@20 {
+						reg = <1 0x20 2
+						       1 0xa0 2
+						       1 0x4d0 2>;
+						interrupt-controller;
+						device_type = "interrupt-controller";
+						#address-cells = <0>;
+						#interrupt-cells = <2>;
+						compatible = "chrp,iic";
+						interrupts = <9 2 0 0>;
+					};
+
+					i8042@60 {
+						#size-cells = <0>;
+						#address-cells = <1>;
+						reg = <1 0x60 1 1 0x64 1>;
+						interrupts = <1 3 12 3>;
+						interrupt-parent = <&i8259>;
+
+						keyboard@0 {
+							reg = <0>;
+							compatible = "pnpPNP,303";
+						};
+
+						mouse@1 {
+							reg = <1>;
+							compatible = "pnpPNP,f03";
+						};
+					};
+
+					rtc@70 {
+						compatible =
+							"pnpPNP,b00";
+						reg = <1 0x70 2>;
+					};
+
+					gpio@400 {
+						reg = <1 0x400 0x80>;
+					};
+				};
+			};
+		};
+
+	};
+
+	pci1: pcie@ffe09000 {
+		reg = <0xffe09000 0x1000>;
+		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xffc10000 0x0 0x00010000>;
+
+		pcie@0 {
+			ranges = <0x02000000 0x0 0xa0000000
+				  0x02000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00010000>;
+		};
+	};
+/*
+ * Only one of Rapid IO or PCI can be present due to HW limitations and
+ * due to the fact that the 2 now share address space in the new memory
+ * map.  The most likely case is that we have PCI, so comment out the
+ * rapidio node.  Leave it here for reference.
+
+	rapidio@ffec0000 {
+		reg = <0xffec0000 0x11000>;
+		compatible = "fsl,srio";
+		interrupts = <48 2 0 0>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		fsl,srio-rmu-handle = <&rmu>;
+		ranges;
+
+		port1 {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			cell-index = <1>;
+			ranges = <0 0 0x80000000 0 0x20000000>;
+		};
+	};
+*/
+
+};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/src/powerpc/fsl/mpc8641_hpcn_36b.dts b/src/powerpc/fsl/mpc8641_hpcn_36b.dts
new file mode 100644
index 000000000000..7ff62046a9ea
--- /dev/null
+++ b/src/powerpc/fsl/mpc8641_hpcn_36b.dts
@@ -0,0 +1,341 @@
+/*
+ * MPC8641 HPCN Device Tree Source
+ *
+ * Copyright 2008-2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc8641si-pre.dtsi"
+
+/ {
+	model = "MPC8641HPCN";
+	compatible = "fsl,mpc8641hpcn";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x40000000>;	// 1G at 0x0
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0x0f 0xffe05000 0x0 0x1000>;
+
+		ranges = <0 0 0xf 0xef800000 0x00800000
+			  2 0 0xf 0xffdf8000 0x00008000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x00800000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00300000>;
+			};
+			partition@300000 {
+				label = "firmware b";
+				reg = <0x00300000 0x00100000>;
+				read-only;
+			};
+			partition@400000 {
+				label = "fs";
+				reg = <0x00400000 0x00300000>;
+			};
+			partition@700000 {
+				label = "firmware a";
+				reg = <0x00700000 0x00100000>;
+				read-only;
+			};
+		};
+	};
+
+	soc: soc8641@fffe00000 {
+		ranges = <0x00000000 0x0f 0xffe00000 0x00100000>;
+
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@0 {
+				interrupts = <10 1 0 0>;
+				reg = <0>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupts = <10 1 0 0>;
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				interrupts = <10 1 0 0>;
+				reg = <2>;
+			};
+			phy3: ethernet-phy@3 {
+				interrupts = <10 1 0 0>;
+				reg = <3>;
+			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet1: ethernet@25000 {
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@25520 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet2: ethernet@26000 {
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@26520 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet3: ethernet@27000 {
+			tbi-handle = <&tbi3>;
+			phy-handle = <&phy3>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@27520 {
+			tbi3: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+	};
+
+	pci0: pcie@fffe08000 {
+		reg = <0x0f 0xffe08000 0x0 0x1000>;
+		ranges = <0x02000000 0x0 0xe0000000 0x0c 0x00000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0x0f 0xffc00000 0x0 0x00010000>;
+		interrupt-map-mask = <0xff00 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x11 func 0 - PCI slot 1 */
+			0x8800 0 0 1 &mpic 2 1
+			0x8800 0 0 2 &mpic 3 1
+			0x8800 0 0 3 &mpic 4 1
+			0x8800 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 1 - PCI slot 1 */
+			0x8900 0 0 1 &mpic 2 1
+			0x8900 0 0 2 &mpic 3 1
+			0x8900 0 0 3 &mpic 4 1
+			0x8900 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 2 - PCI slot 1 */
+			0x8a00 0 0 1 &mpic 2 1
+			0x8a00 0 0 2 &mpic 3 1
+			0x8a00 0 0 3 &mpic 4 1
+			0x8a00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 3 - PCI slot 1 */
+			0x8b00 0 0 1 &mpic 2 1
+			0x8b00 0 0 2 &mpic 3 1
+			0x8b00 0 0 3 &mpic 4 1
+			0x8b00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 4 - PCI slot 1 */
+			0x8c00 0 0 1 &mpic 2 1
+			0x8c00 0 0 2 &mpic 3 1
+			0x8c00 0 0 3 &mpic 4 1
+			0x8c00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 5 - PCI slot 1 */
+			0x8d00 0 0 1 &mpic 2 1
+			0x8d00 0 0 2 &mpic 3 1
+			0x8d00 0 0 3 &mpic 4 1
+			0x8d00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 6 - PCI slot 1 */
+			0x8e00 0 0 1 &mpic 2 1
+			0x8e00 0 0 2 &mpic 3 1
+			0x8e00 0 0 3 &mpic 4 1
+			0x8e00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 7 - PCI slot 1 */
+			0x8f00 0 0 1 &mpic 2 1
+			0x8f00 0 0 2 &mpic 3 1
+			0x8f00 0 0 3 &mpic 4 1
+			0x8f00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x12 func 0 - PCI slot 2 */
+			0x9000 0 0 1 &mpic 3 1
+			0x9000 0 0 2 &mpic 4 1
+			0x9000 0 0 3 &mpic 1 1
+			0x9000 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 1 - PCI slot 2 */
+			0x9100 0 0 1 &mpic 3 1
+			0x9100 0 0 2 &mpic 4 1
+			0x9100 0 0 3 &mpic 1 1
+			0x9100 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 2 - PCI slot 2 */
+			0x9200 0 0 1 &mpic 3 1
+			0x9200 0 0 2 &mpic 4 1
+			0x9200 0 0 3 &mpic 1 1
+			0x9200 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 3 - PCI slot 2 */
+			0x9300 0 0 1 &mpic 3 1
+			0x9300 0 0 2 &mpic 4 1
+			0x9300 0 0 3 &mpic 1 1
+			0x9300 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 4 - PCI slot 2 */
+			0x9400 0 0 1 &mpic 3 1
+			0x9400 0 0 2 &mpic 4 1
+			0x9400 0 0 3 &mpic 1 1
+			0x9400 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 5 - PCI slot 2 */
+			0x9500 0 0 1 &mpic 3 1
+			0x9500 0 0 2 &mpic 4 1
+			0x9500 0 0 3 &mpic 1 1
+			0x9500 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 6 - PCI slot 2 */
+			0x9600 0 0 1 &mpic 3 1
+			0x9600 0 0 2 &mpic 4 1
+			0x9600 0 0 3 &mpic 1 1
+			0x9600 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 7 - PCI slot 2 */
+			0x9700 0 0 1 &mpic 3 1
+			0x9700 0 0 2 &mpic 4 1
+			0x9700 0 0 3 &mpic 1 1
+			0x9700 0 0 4 &mpic 2 1
+
+			// IDSEL 0x1c  USB
+			0xe000 0 0 1 &i8259 12 2
+			0xe100 0 0 2 &i8259 9 2
+			0xe200 0 0 3 &i8259 10 2
+			0xe300 0 0 4 &i8259 11 2
+
+			// IDSEL 0x1d  Audio
+			0xe800 0 0 1 &i8259 6 2
+
+			// IDSEL 0x1e Legacy
+			0xf000 0 0 1 &i8259 7 2
+			0xf100 0 0 1 &i8259 7 2
+
+			// IDSEL 0x1f IDE/SATA
+			0xf800 0 0 1 &i8259 14 2
+			0xf900 0 0 1 &i8259 5 2
+			>;
+
+		pcie@0 {
+			ranges = <0x02000000 0x0 0xe0000000
+				  0x02000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00010000>;
+			uli1575@0 {
+				reg = <0 0 0 0 0>;
+				#size-cells = <2>;
+				#address-cells = <3>;
+				ranges = <0x02000000 0x0 0xe0000000
+					  0x02000000 0x0 0xe0000000
+					  0x0 0x20000000
+					  0x01000000 0x0 0x00000000
+					  0x01000000 0x0 0x00000000
+					  0x0 0x00010000>;
+				isa@1e {
+					device_type = "isa";
+					#size-cells = <1>;
+					#address-cells = <2>;
+					reg = <0xf000 0 0 0 0>;
+					ranges = <1 0 0x01000000 0 0
+						  0x00001000>;
+					interrupt-parent = <&i8259>;
+
+					i8259: interrupt-controller@20 {
+						reg = <1 0x20 2
+						       1 0xa0 2
+						       1 0x4d0 2>;
+						interrupt-controller;
+						device_type = "interrupt-controller";
+						#address-cells = <0>;
+						#interrupt-cells = <2>;
+						compatible = "chrp,iic";
+						interrupts = <9 2 0 0>;
+					};
+
+					i8042@60 {
+						#size-cells = <0>;
+						#address-cells = <1>;
+						reg = <1 0x60 1 1 0x64 1>;
+						interrupts = <1 3 12 3>;
+						interrupt-parent = <&i8259>;
+
+						keyboard@0 {
+							reg = <0>;
+							compatible = "pnpPNP,303";
+						};
+
+						mouse@1 {
+							reg = <1>;
+							compatible = "pnpPNP,f03";
+						};
+					};
+
+					rtc@70 {
+						compatible =
+							"pnpPNP,b00";
+						reg = <1 0x70 2>;
+					};
+
+					gpio@400 {
+						reg = <1 0x400 0x80>;
+					};
+				};
+			};
+		};
+
+	};
+
+	pci1: pcie@fffe09000 {
+		reg = <0x0f 0xffe09000 0x0 0x1000>;
+		ranges = <0x02000000 0x0 0xe0000000 0x0c 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0x0f 0xffc10000 0x0 0x00010000>;
+
+		pcie@0 {
+			ranges = <0x02000000 0x0 0xe0000000
+				  0x02000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00010000>;
+		};
+	};
+};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/src/powerpc/fsl/mpc8641si-post.dtsi b/src/powerpc/fsl/mpc8641si-post.dtsi
new file mode 100644
index 000000000000..eeb7c65d5f22
--- /dev/null
+++ b/src/powerpc/fsl/mpc8641si-post.dtsi
@@ -0,0 +1,147 @@
+/*
+ * MPC8641 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8641-localbus", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,mpc8641-soc", "simple-bus";
+	bus-frequency = <0>;
+
+	mcm-law@0 {
+		compatible = "fsl,mcm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <10>;
+	};
+
+	mcm@1000 {
+		compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+	serial@4600 {
+		interrupts = <28 2 0 0>;
+	};
+/include/ "pq3-dma-0.dtsi"
+	dma@21300 {
+		compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+	};
+	dma-channel@0 {
+		compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel";
+	};
+	dma-channel@80 {
+		compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel";
+	};
+	dma-channel@100 {
+		compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel";
+	};
+	dma-channel@180 {
+		compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel";
+	};
+
+/include/ "pq3-etsec1-0.dtsi"
+	ethernet@24000 {
+		model = "TSEC";
+	};
+/include/ "pq3-etsec1-1.dtsi"
+	ethernet@25000 {
+		model = "TSEC";
+	};
+/include/ "pq3-etsec1-2.dtsi"
+	ethernet@26000 {
+		model = "TSEC";
+	};
+/include/ "pq3-etsec1-3.dtsi"
+	ethernet@27000 {
+		model = "TSEC";
+	};
+
+/include/ "qoriq-mpic.dtsi"
+	msi@41600 {
+		compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
+	};
+	msi@41800 {
+		compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
+	};
+	msi@41a00 {
+		compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
+	};
+
+	global-utilities@e0000 {
+		compatible = "fsl,mpc8641-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
+
+&pci0 {
+	compatible = "fsl,mpc8641-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <100000000>;
+	interrupts = <24 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <24 2 0 0>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			0x0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0x0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0x0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0x0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&pci1 {
+	compatible = "fsl,mpc8641-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <100000000>;
+	interrupts = <25 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <25 2 0 0>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			0x0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0x0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0x0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0x0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
diff --git a/src/powerpc/fsl/mpc8641si-pre.dtsi b/src/powerpc/fsl/mpc8641si-pre.dtsi
new file mode 100644
index 000000000000..7c6db6f7c12e
--- /dev/null
+++ b/src/powerpc/fsl/mpc8641si-pre.dtsi
@@ -0,0 +1,59 @@
+/*
+ * MPC8641 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8641@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+
+		PowerPC,8641@1 {
+			device_type = "cpu";
+			reg = <1>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/mvme2500.dts b/src/powerpc/fsl/mvme2500.dts
new file mode 100644
index 000000000000..69559e970e99
--- /dev/null
+++ b/src/powerpc/fsl/mvme2500.dts
@@ -0,0 +1,280 @@
+/*
+ * Device tree source for the Emerson/Artesyn MVME2500
+ *
+ * Copyright 2014 Elettra-Sincrotrone Trieste S.C.p.A.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Based on: P2020 DS Device Tree Source
+ * Copyright 2009 Freescale Semiconductor Inc.
+ */
+
+/include/ "p2020si-pre.dtsi"
+
+/ {
+	model = "MVME2500";
+	compatible = "artesyn,MVME2500";
+
+	aliases {
+		serial2 = &serial2;
+		serial3 = &serial3;
+		serial4 = &serial4;
+		serial5 = &serial5;
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0 0xffe00000 0x100000>;
+
+		i2c@3000 {
+			hwmon@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+				interrupts = <8 1 0 0>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+
+			eeprom@52 {
+				compatible = "atmel,24c512";
+				reg = <0x52>;
+			};
+
+			eeprom@53 {
+				compatible = "atmel,24c512";
+				reg = <0x53>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+
+		};
+
+		spi0: spi@7000 {
+			fsl,espi-num-chipselects = <2>;
+
+			flash@0 {
+				compatible = "atmel,at25df641", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <10000000>;
+			};
+			flash@1 {
+				compatible = "atmel,at25df641", "jedec,spi-nor";
+				reg = <1>;
+				spi-max-frequency = <10000000>;
+			};
+		};
+
+		usb@22000 {
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@24520 {
+			phy1: ethernet-phy@1 {
+				compatible = "brcm,bcm54616S";
+				interrupts = <6 1 0 0>;
+				reg = <0x1>;
+			};
+
+			phy2: ethernet-phy@2 {
+				compatible = "brcm,bcm54616S";
+				interrupts = <6 1 0 0>;
+				reg = <0x2>;
+			};
+
+			phy3: ethernet-phy@3 {
+				compatible = "brcm,bcm54616S";
+				interrupts = <5 1 0 0>;
+				reg = <0x3>;
+			};
+
+			phy7: ethernet-phy@7 {
+				compatible = "brcm,bcm54616S";
+				interrupts = <7 1 0 0>;
+				reg = <0x7>;
+			};
+
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet1: ethernet@25000 {
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy7>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@25520 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet2: ethernet@26000 {
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy3>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@26520 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xfff00000 0x00080000
+			  0x1 0x0 0x0 0xffc40000 0x00010000
+			  0x2 0x0 0x0 0xffc50000 0x00010000
+			  0x3 0x0 0x0 0xffc60000 0x00010000
+			  0x4 0x0 0x0 0xffc70000 0x00010000
+			  0x6 0x0 0x0 0xffc80000 0x00010000
+			  0x5 0x0 0x0 0xffdf0000 0x00008000>;
+
+		serial2: serial@1,0 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x1 0x0 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <11 2 0 0>;
+		};
+
+		serial3: serial@2,0 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x2 0x0 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <1 2 0 0>;
+		};
+
+		serial4: serial@3,0 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x3 0x0 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <2 2 0 0>;
+		};
+
+		serial5: serial@4,0 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4 0x0 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <3 2 0 0>;
+		};
+
+		mram@0,0 {
+			compatible = "everspin,mram", "mtd-ram";
+			reg = <0x0 0x0 0x80000>;
+			bank-width = <2>;
+		};
+
+		board-control@5,0 {
+			compatible = "artesyn,mvme2500-fpga";
+			reg = <0x5 0x0 0x01000>;
+		};
+
+		cpld@6,0 {
+			compatible = "artesyn,mvme2500-cpld";
+			reg = <0x6 0x0 0x10000>;
+			interrupts = <9 1 0 0>;
+		};
+	};
+
+	pci0: pcie@ffe08000 {
+		reg = <0 0xffe08000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	pci1: pcie@ffe09000 {
+		reg = <0 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+
+	};
+
+	pci2: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+};
+
+/include/ "p2020si-post.dtsi"
+
+/ {
+	soc@ffe00000 {
+		serial@4600 {
+			status = "disabled";
+		};
+
+		i2c@3100 {
+			status = "disabled";
+		};
+
+		sdhc@2e000 {
+			compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+			non-removable;
+		};
+
+	};
+
+};
diff --git a/src/powerpc/fsl/mvme7100.dts b/src/powerpc/fsl/mvme7100.dts
new file mode 100644
index 000000000000..e2d306ad37a6
--- /dev/null
+++ b/src/powerpc/fsl/mvme7100.dts
@@ -0,0 +1,153 @@
+/*
+ * Device tree source for the Emerson/Artesyn MVME7100
+ *
+ * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
+ *
+ * Author: Alessio Igor Bogani <alessio.bogani@elettra.eu>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+/include/ "mpc8641si-pre.dtsi"
+
+/ {
+	model = "MVME7100";
+	compatible = "artesyn,MVME7100";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>;
+	};
+
+	soc: soc@f1000000 {
+		ranges = <0x00000000 0xf1000000 0x00100000>;
+
+		i2c@3000 {
+			hwmon@4c {
+				compatible = "dallas,max6649";
+				reg = <0x4c>;
+			};
+
+			rtc@68 {
+				status = "disabled";
+			};
+		};
+
+
+		enet0: ethernet@24000 {
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@1 {
+				reg = <1>;
+			};
+			phy1: ethernet-phy@2 {
+				reg = <2>;
+			};
+			phy2: ethernet-phy@3 {
+				reg = <3>;
+			};
+			phy3: ethernet-phy@4 {
+				reg = <4>;
+			};
+		};
+
+		enet1: ethernet@25000 {
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@25520 {
+			status = "disabled";
+		};
+
+		enet2: ethernet@26000 {
+			phy-handle = <&phy2>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@26520 {
+			status = "disabled";
+		};
+
+		enet3: ethernet@27000 {
+			phy-handle = <&phy3>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@27520 {
+			status = "disabled";
+		};
+
+		serial1: serial@4600 {
+			status = "disabled";
+		};
+	};
+
+	lbc: localbus@f1005000 {
+		reg = <0xf1005000 0x1000>;
+
+		ranges = <0 0 0xf8000000 0x08000000	// NOR Flash (128MB)
+			  2 0 0xf2030000 0x00010000	// NAND Flash (8GB)
+			  3 0 0xf2400000 0x00080000	// MRAM (512KB)
+			  4 0 0xf2000000 0x00010000	// BCSR
+			  5 0 0xf2010000 0x00010000>;	// QUART
+
+		bcsr@4,0 {
+			compatible = "artesyn,mvme7100-bcsr";
+			reg = <4 0 0x10000>;
+		};
+
+		serial@5,1000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <5 0x1000 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <11 1 0 0>;
+		};
+
+		serial@5,2000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <5 0x2000 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <11 1 0 0>;
+		};
+
+		serial@5,3000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <5 0x3000 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <11 1 0 0>;
+		};
+
+		serial@5,4000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <5 0x4000 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <11 1 0 0>;
+		};
+	};
+
+	pci0: pcie@f1008000 {
+		status = "disabled";
+	};
+
+	pci1: pcie@f1009000 {
+		status = "disabled";
+	};
+
+	chosen {
+		linux,stdout-path = &serial0;
+	};
+};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/src/powerpc/fsl/oca4080.dts b/src/powerpc/fsl/oca4080.dts
new file mode 100644
index 000000000000..17bc6f391248
--- /dev/null
+++ b/src/powerpc/fsl/oca4080.dts
@@ -0,0 +1,145 @@
+/*
+ * OCA4080 Device Tree Source
+ *
+ * Copyright 2014 Prodrive Technologies B.V.
+ *
+ * Based on:
+ * P4080DS Device Tree Source
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p4080si-pre.dtsi"
+
+/ {
+	model = "fsl,OCA4080";
+	compatible = "fsl,OCA4080";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x200000>;
+	};
+
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		i2c@118000 {
+			status = "disabled";
+		};
+
+		i2c@118100 {
+			status = "disabled";
+		};
+
+		i2c@119000 {
+			status = "disabled";
+		};
+
+		i2c@119100 {
+			status = "disabled";
+		};
+
+		usb0: usb@210000 {
+			status = "disabled";
+		};
+
+		usb1: usb@211000 {
+			status = "disabled";
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xef800000 0x800000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x00800000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		status = "disabled";
+	};
+
+	pci1: pcie@ffe201000 {
+		status = "disabled";
+	};
+
+	pci2: pcie@ffe202000 {
+		status = "disabled";
+	};
+};
+
+/include/ "p4080si-post.dtsi"
diff --git a/src/powerpc/fsl/p1010rdb-pa.dts b/src/powerpc/fsl/p1010rdb-pa.dts
new file mode 100644
index 000000000000..e4ab53c4ab50
--- /dev/null
+++ b/src/powerpc/fsl/p1010rdb-pa.dts
@@ -0,0 +1,23 @@
+/*
+ * P1010 RDB Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p1010si-pre.dtsi"
+
+/ {
+	model = "fsl,P1010RDB";
+	compatible = "fsl,P1010RDB";
+
+	/include/ "p1010rdb_32b.dtsi"
+};
+
+/include/ "p1010rdb.dtsi"
+/include/ "p1010rdb-pa.dtsi"
+/include/ "p1010si-post.dtsi"
diff --git a/src/powerpc/fsl/p1010rdb-pa.dtsi b/src/powerpc/fsl/p1010rdb-pa.dtsi
new file mode 100644
index 000000000000..434fb2d58575
--- /dev/null
+++ b/src/powerpc/fsl/p1010rdb-pa.dtsi
@@ -0,0 +1,85 @@
+/*
+ * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc_nand {
+	partition@0 {
+		/* This location must not be altered  */
+		/* 1MB for u-boot Bootloader Image */
+		reg = <0x0 0x00100000>;
+		label = "NAND U-Boot Image";
+		read-only;
+	};
+
+	partition@100000 {
+		/* 1MB for DTB Image */
+		reg = <0x00100000 0x00100000>;
+		label = "NAND DTB Image";
+	};
+
+	partition@200000 {
+		/* 4MB for Linux Kernel Image */
+		reg = <0x00200000 0x00400000>;
+		label = "NAND Linux Kernel Image";
+	};
+
+	partition@600000 {
+		/* 4MB for Compressed Root file System Image */
+		reg = <0x00600000 0x00400000>;
+		label = "NAND Compressed RFS Image";
+	};
+
+	partition@a00000 {
+		/* 15MB for JFFS2 based Root file System */
+		reg = <0x00a00000 0x00f00000>;
+		label = "NAND JFFS2 Root File System";
+	};
+
+	partition@1900000 {
+		/* 7MB for User Area */
+		reg = <0x01900000 0x00700000>;
+		label = "NAND User area";
+	};
+};
+
+&phy0 {
+	interrupts = <1 1 0 0>;
+};
+
+&phy1 {
+	interrupts = <2 1 0 0>;
+};
+
+&phy2 {
+	interrupts = <4 1 0 0>;
+};
diff --git a/src/powerpc/fsl/p1010rdb-pa_36b.dts b/src/powerpc/fsl/p1010rdb-pa_36b.dts
new file mode 100644
index 000000000000..03bd76ca8406
--- /dev/null
+++ b/src/powerpc/fsl/p1010rdb-pa_36b.dts
@@ -0,0 +1,46 @@
+/*
+ * P1010 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1010si-pre.dtsi"
+
+/ {
+	model = "fsl,P1010RDB";
+	compatible = "fsl,P1010RDB";
+
+	/include/ "p1010rdb_36b.dtsi"
+};
+
+/include/ "p1010rdb.dtsi"
+/include/ "p1010rdb-pa.dtsi"
+/include/ "p1010si-post.dtsi"
diff --git a/src/powerpc/fsl/p1010rdb-pb.dts b/src/powerpc/fsl/p1010rdb-pb.dts
new file mode 100644
index 000000000000..37681fda4b7d
--- /dev/null
+++ b/src/powerpc/fsl/p1010rdb-pb.dts
@@ -0,0 +1,35 @@
+/*
+ * P1010 RDB Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p1010si-pre.dtsi"
+
+/ {
+	model = "fsl,P1010RDB-PB";
+	compatible = "fsl,P1010RDB-PB";
+
+	/include/ "p1010rdb_32b.dtsi"
+};
+
+/include/ "p1010rdb.dtsi"
+
+&phy0 {
+	interrupts = <0 1 0 0>;
+};
+
+&phy1 {
+	interrupts = <2 1 0 0>;
+};
+
+&phy2 {
+	interrupts = <1 1 0 0>;
+};
+
+/include/ "p1010si-post.dtsi"
diff --git a/src/powerpc/fsl/p1010rdb-pb_36b.dts b/src/powerpc/fsl/p1010rdb-pb_36b.dts
new file mode 100644
index 000000000000..4cf255fedc96
--- /dev/null
+++ b/src/powerpc/fsl/p1010rdb-pb_36b.dts
@@ -0,0 +1,58 @@
+/*
+ * P1010 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1010si-pre.dtsi"
+
+/ {
+	model = "fsl,P1010RDB-PB";
+	compatible = "fsl,P1010RDB-PB";
+
+	/include/ "p1010rdb_36b.dtsi"
+};
+
+/include/ "p1010rdb.dtsi"
+
+&phy0 {
+	interrupts = <0 1 0 0>;
+};
+
+&phy1 {
+	interrupts = <2 1 0 0>;
+};
+
+&phy2 {
+	interrupts = <1 1 0 0>;
+};
+
+/include/ "p1010si-post.dtsi"
diff --git a/src/powerpc/fsl/p1010rdb.dtsi b/src/powerpc/fsl/p1010rdb.dtsi
new file mode 100644
index 000000000000..a8e4ba070104
--- /dev/null
+++ b/src/powerpc/fsl/p1010rdb.dtsi
@@ -0,0 +1,233 @@
+/*
+ * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_ifc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x2000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@80000 {
+			/* 7 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00700000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@800000 {
+			/* 20MB for JFFS2 based Root file System */
+			reg = <0x00800000 0x01400000>;
+			label = "NOR JFFS2 Root File System";
+		};
+
+		partition@1f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x01f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	ifc_nand: nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,ifc-nand";
+		reg = <0x1 0x0 0x10000>;
+	};
+
+	cpld@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,p1010rdb-cpld";
+		reg = <0x3 0x0 0x0000020>;
+		bank-width = <1>;
+		device-width = <1>;
+	};
+};
+
+&board_soc {
+	i2c@3000 {
+		eeprom@50 {
+			compatible = "st,24c256";
+			reg = <0x50>;
+		};
+
+		rtc@68 {
+			compatible = "pericom,pt7c4338";
+			reg = <0x68>;
+		};
+	};
+
+	i2c@3100 {
+		eeprom@52 {
+			compatible = "atmel,24c01";
+			reg = <0x52>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <40000000>;
+
+			partition@0 {
+				/* 1MB for u-boot Bootloader Image */
+				/* 1MB for Environment */
+				reg = <0x0 0x00100000>;
+				label = "SPI Flash U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 512KB for DTB Image */
+				reg = <0x00100000 0x00080000>;
+				label = "SPI Flash DTB Image";
+			};
+
+			partition@180000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00180000 0x00400000>;
+				label = "SPI Flash Linux Kernel Image";
+			};
+
+			partition@580000 {
+				/* 4MB for Compressed RFS Image */
+				reg = <0x00580000 0x00400000>;
+				label = "SPI Flash Compressed RFSImage";
+			};
+
+			partition@980000 {
+				/* 6.5MB for JFFS2 based RFS */
+				reg = <0x00980000 0x00680000>;
+				label = "SPI Flash JFFS2 RFS";
+			};
+		};
+	};
+
+	usb@22000 {
+		phy_type = "utmi";
+		dr_mode = "host";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			reg = <0x1>;
+		};
+
+		phy1: ethernet-phy@1 {
+			reg = <0x0>;
+		};
+
+		phy2: ethernet-phy@2 {
+			reg = <0x2>;
+		};
+
+		tbi-phy@3 {
+			device_type = "tbi-phy";
+			reg = <0x3>;
+		};
+	};
+
+	mdio@25000 {
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	ptp_clock@b0e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0xb0e00 0xb0>;
+		interrupts = <68 2 0 0 69 2 0 0>;
+		fsl,tclk-period	= <10>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0x80000016>;
+		fsl,tmr-fiper1	= <999999990>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <199999999>;
+	};
+
+	enet0: ethernet@b0000 {
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy1>;
+		tbi-handle = <&tbi0>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy2>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "sgmii";
+	};
+};
+
+&pci0 {
+	pcie@0 {
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			/*
+			 *irq[4:5] are active-high
+			 *irq[6:7] are active-low
+			 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
diff --git a/src/powerpc/fsl/p1010rdb_32b.dtsi b/src/powerpc/fsl/p1010rdb_32b.dtsi
new file mode 100644
index 000000000000..fdc19aab2f70
--- /dev/null
+++ b/src/powerpc/fsl/p1010rdb_32b.dtsi
@@ -0,0 +1,79 @@
+/*
+ * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+memory {
+	device_type = "memory";
+};
+
+board_ifc: ifc: ifc@ffe1e000 {
+	/* NOR, NAND Flashes and CPLD on board */
+	ranges = <0x0 0x0 0x0 0xee000000 0x02000000
+		  0x1 0x0 0x0 0xff800000 0x00010000
+		  0x3 0x0 0x0 0xffb00000 0x00000020>;
+	reg = <0x0 0xffe1e000 0 0x2000>;
+};
+
+board_soc: soc: soc@ffe00000 {
+	ranges = <0x0 0x0 0xffe00000 0x100000>;
+};
+
+pci0: pcie@ffe09000 {
+	reg = <0 0xffe09000 0 0x1000>;
+	ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+		  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+	pcie@0 {
+		ranges = <0x2000000 0x0 0xa0000000
+			  0x2000000 0x0 0xa0000000
+			  0x0 0x20000000
+
+			  0x1000000 0x0 0x0
+			  0x1000000 0x0 0x0
+			  0x0 0x100000>;
+	};
+};
+
+pci1: pcie@ffe0a000 {
+	reg = <0 0xffe0a000 0 0x1000>;
+	ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+		  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+	pcie@0 {
+		ranges = <0x2000000 0x0 0x80000000
+			  0x2000000 0x0 0x80000000
+			  0x0 0x20000000
+
+			  0x1000000 0x0 0x0
+			  0x1000000 0x0 0x0
+			  0x0 0x100000>;
+	};
+};
diff --git a/src/powerpc/fsl/p1010rdb_36b.dtsi b/src/powerpc/fsl/p1010rdb_36b.dtsi
new file mode 100644
index 000000000000..de2fceed4f79
--- /dev/null
+++ b/src/powerpc/fsl/p1010rdb_36b.dtsi
@@ -0,0 +1,79 @@
+/*
+ * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+memory {
+	device_type = "memory";
+};
+
+board_ifc: ifc: ifc@fffe1e000 {
+	/* NOR, NAND Flashes and CPLD on board */
+	ranges = <0x0 0x0 0xf 0xee000000 0x02000000
+		  0x1 0x0 0xf 0xff800000 0x00010000
+		  0x3 0x0 0xf 0xffb00000 0x00000020>;
+	reg = <0xf 0xffe1e000 0 0x2000>;
+};
+
+board_soc: soc: soc@fffe00000 {
+	ranges = <0x0 0xf 0xffe00000 0x100000>;
+};
+
+pci0: pcie@fffe09000 {
+	reg = <0xf 0xffe09000 0 0x1000>;
+	ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+		  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+	pcie@0 {
+		ranges = <0x2000000 0x0 0xc0000000
+			  0x2000000 0x0 0xc0000000
+			  0x0 0x20000000
+
+			  0x1000000 0x0 0x0
+			  0x1000000 0x0 0x0
+			  0x0 0x100000>;
+	};
+};
+
+pci1: pcie@fffe0a000 {
+	reg = <0xf 0xffe0a000 0 0x1000>;
+	ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+		  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+	pcie@0 {
+		ranges = <0x2000000 0x0 0xc0000000
+			  0x2000000 0x0 0xc0000000
+			  0x0 0x20000000
+
+			  0x1000000 0x0 0x0
+			  0x1000000 0x0 0x0
+			  0x0 0x100000>;
+	};
+};
diff --git a/src/powerpc/fsl/p1010si-post.dtsi b/src/powerpc/fsl/p1010si-post.dtsi
new file mode 100644
index 000000000000..af12ead88c5f
--- /dev/null
+++ b/src/powerpc/fsl/p1010si-post.dtsi
@@ -0,0 +1,202 @@
+/*
+ * P1010/P1014 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <16 2 0 0 19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+	compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xa000 */
+&pci1 {
+	compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,p1010-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,p1010-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,p1010-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+	spi0: spi@7000 {
+		fsl,espi-num-chipselects = <1>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+/include/ "pq3-sata2-0.dtsi"
+/include/ "pq3-sata2-1.dtsi"
+
+	can0: can@1c000 {
+		compatible = "fsl,p1010-flexcan";
+		reg = <0x1c000 0x1000>;
+		interrupts = <48 0x2 0 0>;
+	};
+
+	can1: can@1d000 {
+		compatible = "fsl,p1010-flexcan";
+		reg = <0x1d000 0x1000>;
+		interrupts = <61 0x2 0 0>;
+	};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,p1010-l2-cache-controller",
+				"fsl,p1014-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		compatible = "fsl,p1010-esdhc", "fsl,esdhc";
+		sdhci,auto-cmd12;
+	};
+
+/include/ "pq3-sec4.4-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+	enet0: ethernet@b0000 {
+		queue-group@b0000 {
+			fsl,rx-bit-map = <0xff>;
+			fsl,tx-bit-map = <0xff>;
+		};
+	};
+
+/include/ "pq3-etsec2-1.dtsi"
+	enet1: ethernet@b1000 {
+		queue-group@b1000 {
+			fsl,rx-bit-map = <0xff>;
+			fsl,tx-bit-map = <0xff>;
+		};
+	};
+
+/include/ "pq3-etsec2-2.dtsi"
+	enet2: ethernet@b2000 {
+		queue-group@b2000 {
+			fsl,rx-bit-map = <0xff>;
+			fsl,tx-bit-map = <0xff>;
+		};
+
+	};
+
+	global-utilities@e0000 {
+		compatible = "fsl,p1010-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/src/powerpc/fsl/p1010si-pre.dtsi b/src/powerpc/fsl/p1010si-pre.dtsi
new file mode 100644
index 000000000000..6e76f9b282a1
--- /dev/null
+++ b/src/powerpc/fsl/p1010si-pre.dtsi
@@ -0,0 +1,67 @@
+/*
+ * P1010/P1014 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,P1010";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		can0 = &can0;
+		can1 = &can1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1010@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/p1020mbg-pc.dtsi b/src/powerpc/fsl/p1020mbg-pc.dtsi
new file mode 100644
index 000000000000..a24699cfea9c
--- /dev/null
+++ b/src/powerpc/fsl/p1020mbg-pc.dtsi
@@ -0,0 +1,151 @@
+/*
+ * P1020 MBG-PC Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x4000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* 128KB for DTB Image */
+			reg = <0x0 0x00020000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@20000 {
+			/* 3.875 MB for Linux Kernel Image */
+			reg = <0x00020000 0x003e0000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 58MB for Root file System */
+			reg = <0x00400000 0x03a00000>;
+			label = "NOR Root File System";
+		};
+
+		partition@3e00000 {
+			/* This location must not be altered  */
+			/* 1M for Vitesse 7385 Switch firmware */
+			reg = <0x3e00000 0x00100000>;
+			label = "NOR Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@3f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x03f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	L2switch@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "vitesse-7385";
+		reg = <0x2 0x0 0x20000>;
+	};
+};
+
+&soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "dallas,ds1339";
+			reg = <0x68>;
+		};
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <2 1 0 0>;
+			reg = <0x1>;
+		};
+	};
+
+	mdio@25000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26000 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		fixed-link = <1 1 1000 0 0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	/* USB2 is shared with localbus, so it must be disabled
+	   by default. We can't put 'status = "disabled";' here
+	   since U-Boot doesn't clear the status property when
+	   it enables USB2. OTOH, U-Boot does create a new node
+	   when there isn't any. So, just comment it out.
+	*/
+	usb@23000 {
+		status = "disabled";
+		phy_type = "ulpi";
+	};
+};
diff --git a/src/powerpc/fsl/p1020mbg-pc_32b.dts b/src/powerpc/fsl/p1020mbg-pc_32b.dts
new file mode 100644
index 000000000000..b29d1fcb5e6b
--- /dev/null
+++ b/src/powerpc/fsl/p1020mbg-pc_32b.dts
@@ -0,0 +1,89 @@
+/*
+ * P1020 MBG-PC Device Tree Source (32-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020MBG-PC";
+	compatible = "fsl,P1020MBG-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0x0 0xffe05000 0x0 0x1000>;
+
+		/* NOR and L2 switch */
+		ranges = <0x0 0x0 0x0 0xec000000 0x04000000
+			  0x1 0x0 0x0 0xffa00000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		reg = <0x0 0xffe09000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0x0 0xffe0a000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020mbg-pc.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/src/powerpc/fsl/p1020mbg-pc_36b.dts b/src/powerpc/fsl/p1020mbg-pc_36b.dts
new file mode 100644
index 000000000000..678d0eec24e2
--- /dev/null
+++ b/src/powerpc/fsl/p1020mbg-pc_36b.dts
@@ -0,0 +1,89 @@
+/*
+ * P1020 MBG-PC Device Tree Source (36-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020MBG-PC";
+	compatible = "fsl,P1020MBG-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0x0 0x1000>;
+
+		/* NOR and L2 switch */
+		ranges = <0x0 0x0 0xf 0xec000000 0x04000000
+			  0x1 0x0 0xf 0xffa00000 0x00040000
+			  0x2 0x0 0xf 0xffb00000 0x00020000>;
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020mbg-pc.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/src/powerpc/fsl/p1020rdb-pc.dtsi b/src/powerpc/fsl/p1020rdb-pc.dtsi
new file mode 100644
index 000000000000..25f81eea60e0
--- /dev/null
+++ b/src/powerpc/fsl/p1020rdb-pc.dtsi
@@ -0,0 +1,247 @@
+/*
+ * P1020 RDB-PC Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x1000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 256KB for Vitesse 7385 Switch firmware */
+			reg = <0x0 0x00040000>;
+			label = "NOR Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@80000 {
+			/* 3.5 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00380000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 11MB for JFFS2 based Root file System */
+			reg = <0x00400000 0x00b00000>;
+			label = "NOR JFFS2 Root File System";
+		};
+
+		partition@f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x00f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,p1020-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x1 0x0 0x40000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND DTB Image";
+		};
+
+		partition@200000 {
+			/* 4MB for Linux Kernel Image */
+			reg = <0x00200000 0x00400000>;
+			label = "NAND Linux Kernel Image";
+		};
+
+		partition@600000 {
+			/* 4MB for Compressed Root file System Image */
+			reg = <0x00600000 0x00400000>;
+			label = "NAND Compressed RFS Image";
+		};
+
+		partition@a00000 {
+			/* 7MB for JFFS2 based Root file System */
+			reg = <0x00a00000 0x00700000>;
+			label = "NAND JFFS2 Root File System";
+		};
+
+		partition@1100000 {
+			/* 15MB for JFFS2 based Root file System */
+			reg = <0x01100000 0x00f00000>;
+			label = "NAND Writable User area";
+		};
+	};
+
+	L2switch@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "vitesse-7385";
+		reg = <0x2 0x0 0x20000>;
+	};
+
+	cpld@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cpld";
+		reg = <0x3 0x0 0x20000>;
+		read-only;
+	};
+};
+
+&soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "pericom,pt7c4338";
+			reg = <0x68>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <40000000>; /* input clock */
+
+			partition@u-boot {
+				/* 512KB for u-boot Bootloader Image */
+				reg = <0x0 0x00080000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			partition@dtb {
+				/* 512KB for DTB Image*/
+				reg = <0x00080000 0x00080000>;
+				label = "dtb";
+			};
+
+			partition@kernel {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00100000 0x00400000>;
+				label = "kernel";
+			};
+
+			partition@fs {
+				/* 4MB for Compressed RFS Image */
+				reg = <0x00500000 0x00400000>;
+				label = "file system";
+			};
+
+			partition@jffs-fs {
+				/* 7MB for JFFS2 based RFS */
+				reg = <0x00900000 0x00700000>;
+				label = "file system jffs2";
+			};
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	/* USB2 is shared with localbus, so it must be disabled
+	   by default. We can't put 'status = "disabled";' here
+	   since U-Boot doesn't clear the status property when
+	   it enables USB2. OTOH, U-Boot does create a new node
+	   when there isn't any. So, just comment it out.
+	usb@23000 {
+		phy_type = "ulpi";
+	};
+	*/
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupt-parent = <&mpic>;
+			interrupts = <3 1>;
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupt-parent = <&mpic>;
+			interrupts = <2 1>;
+			reg = <0x1>;
+		};
+
+		tbi0: tbi-phy@11 {
+			device_type = "tbi-phy";
+			reg = <0x11>;
+		};
+	};
+
+	mdio@25000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		fixed-link = <1 1 1000 0 0>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};
diff --git a/src/powerpc/fsl/p1020rdb-pc_32b.dts b/src/powerpc/fsl/p1020rdb-pc_32b.dts
new file mode 100644
index 000000000000..8175bf6f3e9c
--- /dev/null
+++ b/src/powerpc/fsl/p1020rdb-pc_32b.dts
@@ -0,0 +1,90 @@
+/*
+ * P1020 RDB-PC Device Tree Source (32-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020RDB-PC";
+	compatible = "fsl,P1020RDB-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xff800000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000
+			  0x3 0x0 0x0 0xffa00000 0x00020000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020rdb-pc.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/src/powerpc/fsl/p1020rdb-pc_36b.dts b/src/powerpc/fsl/p1020rdb-pc_36b.dts
new file mode 100644
index 000000000000..01c305795163
--- /dev/null
+++ b/src/powerpc/fsl/p1020rdb-pc_36b.dts
@@ -0,0 +1,90 @@
+/*
+ * P1020 RDB-PC Device Tree Source (36-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020RDB-PC";
+	compatible = "fsl,P1020RDB-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+			  0x1 0x0 0xf 0xff800000 0x00040000
+			  0x2 0x0 0xf 0xffb00000 0x00040000
+			  0x3 0x0 0xf 0xffa00000 0x00020000>;
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020rdb-pc.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/src/powerpc/fsl/p1020rdb-pc_camp_core0.dts b/src/powerpc/fsl/p1020rdb-pc_camp_core0.dts
new file mode 100644
index 000000000000..f411515937ec
--- /dev/null
+++ b/src/powerpc/fsl/p1020rdb-pc_camp_core0.dts
@@ -0,0 +1,64 @@
+/*
+ * P1020 RDB-PC  Core0 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts file allows core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb,
+ * eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi.
+ *
+ * Please note to add "-b 0" for core0's dts compiling.
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p1020rdb-pc_32b.dts"
+
+/ {
+	model = "fsl,P1020RDB-PC";
+	compatible = "fsl,P1020RDB-PC";
+
+	aliases {
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		serial0 = &serial0;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		PowerPC,P1020@1 {
+			status = "disabled";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		status = "disabled";
+	};
+
+	soc@ffe00000 {
+		serial1: serial@4600 {
+			status = "disabled";
+		};
+
+		enet0: ethernet@b0000 {
+			status = "disabled";
+		};
+
+		mpic: pic@40000 {
+			protected-sources = <
+			42 29 30 34	/* serial1, enet0-queue-group0 */
+			17 18 24 45	/* enet0-queue-group1, crypto */
+			>;
+			pic-no-reset;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/p1020rdb-pc_camp_core1.dts b/src/powerpc/fsl/p1020rdb-pc_camp_core1.dts
new file mode 100644
index 000000000000..a91335ad82c2
--- /dev/null
+++ b/src/powerpc/fsl/p1020rdb-pc_camp_core1.dts
@@ -0,0 +1,142 @@
+/*
+ * P1020 RDB-PC Core1 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts allows core1 to have l2, eth0, crypto.
+ *
+ * Please note to add "-b 1" for core1's dts compiling.
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p1020rdb-pc_32b.dts"
+
+/ {
+	model = "fsl,P1020RDB-PC";
+	compatible = "fsl,P1020RDB-PC";
+
+	aliases {
+		ethernet0 = &enet0;
+		serial0 = &serial1;
+		};
+
+	cpus {
+		PowerPC,P1020@0 {
+			status = "disabled";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		status = "disabled";
+	};
+
+	soc@ffe00000 {
+		ecm-law@0 {
+			status = "disabled";
+		};
+
+		ecm@1000 {
+			status = "disabled";
+		};
+
+		memory-controller@2000 {
+			status = "disabled";
+		};
+
+		i2c@3000 {
+			status = "disabled";
+		};
+
+		i2c@3100 {
+			status = "disabled";
+		};
+
+		serial0: serial@4500 {
+			status = "disabled";
+		};
+
+		spi@7000 {
+			status = "disabled";
+		};
+
+		gpio: gpio-controller@f000 {
+			status = "disabled";
+		};
+
+		dma@21300 {
+			status = "disabled";
+		};
+
+		mdio@24000 {
+			status = "disabled";
+		};
+
+		mdio@25000 {
+			status = "disabled";
+		};
+
+		enet1: ethernet@b1000 {
+			status = "disabled";
+		};
+
+		enet2: ethernet@b2000 {
+			status = "disabled";
+		};
+
+		usb@22000 {
+			status = "disabled";
+		};
+
+		sdhci@2e000 {
+			status = "disabled";
+		};
+
+		mpic: pic@40000 {
+			protected-sources = <
+			16 		/* ecm, mem, L2, pci0, pci1 */
+			43 42 59	/* i2c, serial0, spi */
+			47 63 62 	/* gpio, tdm */
+			20 21 22 23	/* dma */
+			03 02 		/* mdio */
+			35 36 40	/* enet1-queue-group0 */
+			51 52 67	/* enet1-queue-group1 */
+			31 32 33	/* enet2-queue-group0 */
+			25 26 27	/* enet2-queue-group1 */
+			28 72 58 	/* usb, sdhci, crypto */
+			0xb0 0xb1 0xb2	/* message */
+			0xb3 0xb4 0xb5
+			0xb6 0xb7
+			0xe0 0xe1 0xe2	/* msi */
+			0xe3 0xe4 0xe5
+			0xe6 0xe7		/* sdhci, crypto , pci */
+			>;
+			pic-no-reset;
+		};
+
+		msi@41600 {
+			status = "disabled";
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			status = "disabled";
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		status = "disabled";
+	};
+
+	pci1: pcie@ffe0a000 {
+		status = "disabled";
+	};
+};
diff --git a/src/powerpc/fsl/p1020rdb-pd.dts b/src/powerpc/fsl/p1020rdb-pd.dts
new file mode 100644
index 000000000000..f2dc6c09be52
--- /dev/null
+++ b/src/powerpc/fsl/p1020rdb-pd.dts
@@ -0,0 +1,292 @@
+/*
+ * P1020 RDB-PD Device Tree Source (32-bit address map)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020RDB-PD";
+	compatible = "fsl,P1020RDB-PD";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0x0 0xffe05000 0x0 0x1000>;
+
+		/* NOR, NAND flash, L2 switch and CPLD */
+		ranges = <0x0 0x0 0x0 0xec000000 0x04000000
+			  0x1 0x0 0x0 0xff800000 0x00040000
+			  0x2 0x0 0x0 0xffa00000 0x00020000
+			  0x3 0x0 0x0 0xffb00000 0x00020000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x4000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				/* 128KB for DTB Image */
+				reg = <0x0 0x00020000>;
+				label = "NOR DTB Image";
+			};
+
+			partition@20000 {
+				/* 3.875 MB for Linux Kernel Image */
+				reg = <0x00020000 0x003e0000>;
+				label = "NOR Linux Kernel Image";
+			};
+
+			partition@400000 {
+				/* 58MB for Root file System */
+				reg = <0x00400000 0x03a00000>;
+				label = "NOR Root File System";
+			};
+
+			partition@3e00000 {
+				/* This location must not be altered  */
+				/* 1M for Vitesse 7385 Switch firmware */
+				reg = <0x3e00000 0x00100000>;
+				label = "NOR Vitesse-7385 Firmware";
+				read-only;
+			};
+
+			partition@3f00000 {
+				/* This location must not be altered  */
+				/* 512KB for u-boot Bootloader Image */
+				/* 512KB for u-boot Environment Variables */
+				reg = <0x03f00000 0x00100000>;
+				label = "NOR U-Boot Image";
+				read-only;
+			};
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1020-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x40000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND DTB Image";
+			};
+
+			partition@200000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00200000 0x00400000>;
+				label = "NAND Linux Kernel Image";
+			};
+
+			partition@600000 {
+				/* 122MB for File System Image */
+				reg = <0x00600000 0x07a00000>;
+				label = "NAND File System Image";
+			};
+		};
+
+		cpld@2,0 {
+			compatible = "fsl,p1020rdb-pd-cpld";
+			reg = <0x2 0x0 0x20000>;
+		};
+
+		L2switch@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "vitesse-7385";
+			reg = <0x3 0x0 0x20000>;
+		};
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+
+		i2c@3000 {
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		spi@7000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25sl12801", "jedec,spi-nor";
+				reg = <0>;
+				/* input clock */
+				spi-max-frequency = <40000000>;
+
+				partition@0 {
+					/* 512KB for u-boot Bootloader Image */
+					reg = <0x0 0x00080000>;
+					label = "SPI U-Boot Image";
+					read-only;
+				};
+
+				partition@80000 {
+					/* 512KB for DTB Image*/
+					reg = <0x00080000 0x00080000>;
+					label = "SPI DTB Image";
+				};
+
+				partition@100000 {
+					/* 4MB for Linux Kernel Image */
+					reg = <0x00100000 0x00400000>;
+					label = "SPI Linux Kernel Image";
+				};
+
+				partition@500000 {
+					/* 11MB for FS System Image */
+					reg = <0x00500000 0x00b00000>;
+					label = "SPI File System Image";
+				};
+			};
+
+			slic@0 {
+				compatible = "zarlink,le88266";
+				reg = <1>;
+				spi-max-frequency = <8000000>;
+			};
+
+			slic@1 {
+				compatible = "zarlink,le88266";
+				reg = <2>;
+				spi-max-frequency = <8000000>;
+			};
+		};
+
+		mdio@24000 {
+			phy0: ethernet-phy@0 {
+				interrupts = <3 1 0 0>;
+				reg = <0x0>;
+			};
+
+			phy1: ethernet-phy@1 {
+				interrupts = <2 1 0 0>;
+				reg = <0x1>;
+			};
+		};
+
+		mdio@25000 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@26000 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		ptp_clock@b0e00 {
+			compatible = "fsl,etsec-ptp";
+			reg = <0xb0e00 0xb0>;
+			interrupts = <68 2 0 0 69 2 0 0>;
+			fsl,tclk-period	= <10>;
+			fsl,tmr-prsc	= <2>;
+			fsl,tmr-add	= <0x80000016>;
+			fsl,tmr-fiper1	= <999999990>;
+			fsl,tmr-fiper2	= <99990>;
+			fsl,max-adj	= <199999999>;
+		};
+
+		enet0: ethernet@b0000 {
+			fixed-link = <1 1 1000 0 0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet1: ethernet@b1000 {
+			phy-handle = <&phy0>;
+			tbi-handle = <&tbi1>;
+			phy-connection-type = "sgmii";
+		};
+
+		enet2: ethernet@b2000 {
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		usb@22000 {
+			phy_type = "ulpi";
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		reg = <0x0 0xffe09000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0x0 0xffe0a000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020si-post.dtsi"
diff --git a/src/powerpc/fsl/p1020rdb.dts b/src/powerpc/fsl/p1020rdb.dts
new file mode 100644
index 000000000000..81362252bc8c
--- /dev/null
+++ b/src/powerpc/fsl/p1020rdb.dts
@@ -0,0 +1,66 @@
+/*
+ * P1020 RDB Device Tree Source
+ *
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020RDB";
+	compatible = "fsl,P1020RDB";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_lbc: lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xffa00000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000>;
+	};
+
+	board_soc: soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020rdb.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/src/powerpc/fsl/p1020rdb.dtsi b/src/powerpc/fsl/p1020rdb.dtsi
new file mode 100644
index 000000000000..703142ee6627
--- /dev/null
+++ b/src/powerpc/fsl/p1020rdb.dtsi
@@ -0,0 +1,246 @@
+/*
+ * P1020 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x1000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 256KB for Vitesse 7385 Switch firmware */
+			reg = <0x0 0x00040000>;
+			label = "NOR (RO) Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR (RO) DTB Image";
+			read-only;
+		};
+
+		partition@80000 {
+			/* 3.5 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00380000>;
+			label = "NOR (RO) Linux Kernel Image";
+			read-only;
+		};
+
+		partition@400000 {
+			/* 11MB for JFFS2 based Root file System */
+			reg = <0x00400000 0x00b00000>;
+			label = "NOR (RW) JFFS2 Root File System";
+		};
+
+		partition@f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x00f00000 0x00100000>;
+			label = "NOR (RO) U-Boot Image";
+			read-only;
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,p1020-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x1 0x0 0x40000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND (RO) U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND (RO) DTB Image";
+			read-only;
+		};
+
+		partition@200000 {
+			/* 4MB for Linux Kernel Image */
+			reg = <0x00200000 0x00400000>;
+			label = "NAND (RO) Linux Kernel Image";
+			read-only;
+		};
+
+		partition@600000 {
+			/* 4MB for Compressed Root file System Image */
+			reg = <0x00600000 0x00400000>;
+			label = "NAND (RO) Compressed RFS Image";
+			read-only;
+		};
+
+		partition@a00000 {
+			/* 7MB for JFFS2 based Root file System */
+			reg = <0x00a00000 0x00700000>;
+			label = "NAND (RW) JFFS2 Root File System";
+		};
+
+		partition@1100000 {
+			/* 15MB for JFFS2 based Root file System */
+			reg = <0x01100000 0x00f00000>;
+			label = "NAND (RW) Writable User area";
+		};
+	};
+
+	L2switch@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "vitesse-7385";
+		reg = <0x2 0x0 0x20000>;
+	};
+};
+
+&board_soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "dallas,ds1339";
+			reg = <0x68>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <40000000>; /* input clock */
+
+			partition@u-boot {
+				/* 512KB for u-boot Bootloader Image */
+				reg = <0x0 0x00080000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			partition@dtb {
+				/* 512KB for DTB Image */
+				reg = <0x00080000 0x00080000>;
+				label = "dtb";
+				read-only;
+			};
+
+			partition@kernel {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00100000 0x00400000>;
+				label = "kernel";
+				read-only;
+			};
+
+			partition@fs {
+				/* 4MB for Compressed RFS Image */
+				reg = <0x00500000 0x00400000>;
+				label = "file system";
+				read-only;
+			};
+
+			partition@jffs-fs {
+				/* 7MB for JFFS2 based RFS */
+				reg = <0x00900000 0x00700000>;
+				label = "file system jffs2";
+			};
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+		dr_mode = "host";
+	};
+
+	/* USB2 is shared with localbus. It is used
+	   only in case of SPI and SD boot after
+	   appropriate device-tree fixup done by uboot */
+	usb@23000 {
+		phy_type = "ulpi";
+		dr_mode = "host";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupt-parent = <&mpic>;
+			interrupts = <3 1>;
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupt-parent = <&mpic>;
+			interrupts = <2 1>;
+			reg = <0x1>;
+		};
+
+		tbi-phy@2 {
+			device_type = "tbi-phy";
+			reg = <0x2>;
+		};
+	};
+
+	mdio@25000 {
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		fixed-link = <1 1 1000 0 0>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi0>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};
diff --git a/src/powerpc/fsl/p1020rdb_36b.dts b/src/powerpc/fsl/p1020rdb_36b.dts
new file mode 100644
index 000000000000..74471e3ca136
--- /dev/null
+++ b/src/powerpc/fsl/p1020rdb_36b.dts
@@ -0,0 +1,66 @@
+/*
+ * P1020 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020RDB";
+	compatible = "fsl,P1020RDB";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_lbc: lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+			  0x1 0x0 0xf 0xffa00000 0x00040000
+			  0x2 0x0 0xf 0xffb00000 0x00020000>;
+	};
+
+	board_soc: soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020rdb.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/src/powerpc/fsl/p1020si-post.dtsi b/src/powerpc/fsl/p1020si-post.dtsi
new file mode 100644
index 000000000000..642dc3a83d0e
--- /dev/null
+++ b/src/powerpc/fsl/p1020si-post.dtsi
@@ -0,0 +1,185 @@
+/*
+ * P1020/P1011 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <19 2 0 0>,
+		     <16 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xa000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,p1020-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,p1020-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,p1020-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+	spi@7000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,p1020-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
+/include/ "pq3-usb2-dr-1.dtsi"
+	usb@23000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
+
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		compatible = "fsl,p1020-esdhc", "fsl,esdhc";
+		sdhci,auto-cmd12;
+	};
+/include/ "pq3-sec3.3-0.dtsi"
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+	enet0: enet0_grp2: ethernet@b0000 {
+	};
+
+/include/ "pq3-etsec2-1.dtsi"
+	enet1: enet1_grp2: ethernet@b1000 {
+	};
+
+/include/ "pq3-etsec2-2.dtsi"
+	enet2: enet2_grp2: ethernet@b2000 {
+	};
+
+	global-utilities@e0000 {
+		compatible = "fsl,p1020-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"
+/include/ "pq3-etsec2-grp2-2.dtsi"
diff --git a/src/powerpc/fsl/p1020si-pre.dtsi b/src/powerpc/fsl/p1020si-pre.dtsi
new file mode 100644
index 000000000000..fed9c4c8d962
--- /dev/null
+++ b/src/powerpc/fsl/p1020si-pre.dtsi
@@ -0,0 +1,71 @@
+/*
+ * P1020/P1011 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,P1020";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1020@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1020@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/p1020utm-pc.dtsi b/src/powerpc/fsl/p1020utm-pc.dtsi
new file mode 100644
index 000000000000..7ea85eabcc5c
--- /dev/null
+++ b/src/powerpc/fsl/p1020utm-pc.dtsi
@@ -0,0 +1,140 @@
+/*
+ * P1020 UTM-PC Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x2000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* 256KB for DTB Image */
+			reg = <0x0 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@40000 {
+			/* 3.75 MB for Linux Kernel Image */
+			reg = <0x00040000 0x003c0000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 27MB for Root file System */
+			reg = <0x00400000 0x01b00000>;
+			label = "NOR Root File System";
+		};
+
+		partition@1f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x01f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+};
+
+&soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "dallas,ds1339";
+			reg = <0x68>;
+		};
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <2 1 0 0>;
+			reg = <0x1>;
+		};
+		phy2: ethernet-phy@2 {
+			interrupts = <1 1 0 0>;
+			reg = <0x2>;
+		};
+	};
+
+	mdio@25000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26000 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		phy-handle = <&phy2>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	/* USB2 is shared with localbus, so it must be disabled
+	   by default. We can't put 'status = "disabled";' here
+	   since U-Boot doesn't clear the status property when
+	   it enables USB2. OTOH, U-Boot does create a new node
+	   when there isn't any. So, just comment it out.
+	*/
+	usb@23000 {
+		status = "disabled";
+		phy_type = "ulpi";
+	};
+};
diff --git a/src/powerpc/fsl/p1020utm-pc_32b.dts b/src/powerpc/fsl/p1020utm-pc_32b.dts
new file mode 100644
index 000000000000..bc03ef611f98
--- /dev/null
+++ b/src/powerpc/fsl/p1020utm-pc_32b.dts
@@ -0,0 +1,89 @@
+/*
+ * P1020 UTM-PC Device Tree Source (32-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020UTM-PC";
+	compatible = "fsl,P1020UTM-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0x0 0xffe05000 0x0 0x1000>;
+
+		/* NOR */
+		ranges = <0x0 0x0 0x0 0xec000000 0x02000000
+			  0x1 0x0 0x0 0xffa00000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		reg = <0x0 0xffe09000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0x0 0xffe0a000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020utm-pc.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/src/powerpc/fsl/p1020utm-pc_36b.dts b/src/powerpc/fsl/p1020utm-pc_36b.dts
new file mode 100644
index 000000000000..32766f6a475e
--- /dev/null
+++ b/src/powerpc/fsl/p1020utm-pc_36b.dts
@@ -0,0 +1,89 @@
+/*
+ * P1020 UTM-PC Device Tree Source (36-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020UTM-PC";
+	compatible = "fsl,P1020UTM-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0x0 0x1000>;
+
+		/* NOR */
+		ranges = <0x0 0x0 0xf 0xec000000 0x02000000
+			  0x1 0x0 0xf 0xffa00000 0x00040000
+			  0x2 0x0 0xf 0xffb00000 0x00020000>;
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020utm-pc.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/src/powerpc/fsl/p1021mds.dts b/src/powerpc/fsl/p1021mds.dts
new file mode 100644
index 000000000000..291454c75dda
--- /dev/null
+++ b/src/powerpc/fsl/p1021mds.dts
@@ -0,0 +1,323 @@
+/*
+ * P1021 MDS Device Tree Source
+ *
+ * Copyright 2010,2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p1021si-pre.dtsi"
+/ {
+	model = "fsl,P1021";
+	compatible = "fsl,P1021MDS";
+
+	aliases {
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0x0 0xffe05000 0x0 0x1000>;
+
+		/* NAND Flash, BCSR, PMC0/1*/
+		ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
+			  0x1 0x0 0x0 0xf8000000 0x00008000
+			  0x2 0x0 0x0 0xf8010000 0x00020000
+			  0x3 0x0 0x0 0xf8020000 0x00020000>;
+
+		nand@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1021-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <0x0 0x0 0x40000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND (RO) U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND (RO) DTB Image";
+				read-only;
+			};
+
+			partition@200000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00200000 0x00400000>;
+				label = "NAND (RO) Linux Kernel Image";
+				read-only;
+			};
+
+			partition@600000 {
+				/* 5MB for Compressed Root file System Image */
+				reg = <0x00600000 0x00500000>;
+				label = "NAND (RO) Compressed RFS Image";
+				read-only;
+			};
+
+			partition@b00000 {
+				/* 6MB for JFFS2 based Root file System */
+				reg = <0x00a00000 0x00600000>;
+				label = "NAND (RW) JFFS2 Root File System";
+			};
+
+			partition@1100000 {
+				/* 14MB for JFFS2 based Root file System */
+				reg = <0x01100000 0x00e00000>;
+				label = "NAND (RW) Writable User area";
+			};
+
+			partition@1f00000 {
+				/* 1MB for microcode */
+				reg = <0x01f00000 0x00100000>;
+				label = "NAND (RO) QE Ucode";
+				read-only;
+			};
+		};
+
+		bcsr@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1021mds-bcsr";
+			reg = <1 0 0x8000>;
+			ranges = <0 1 0 0x8000>;
+		};
+
+		pib@2,0 {
+			compatible = "fsl,p1021mds-pib";
+			reg = <2 0 0x10000>;
+		};
+
+		pib@3,0 {
+			compatible = "fsl,p1021mds-pib";
+			reg = <3 0 0x10000>;
+		};
+	};
+
+	soc: soc@ffe00000 {
+		compatible = "fsl,p1021-immr", "simple-bus";
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+
+		i2c@3000 {
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		spi@7000 {
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25sl12801", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+
+				partition@u-boot {
+					label = "u-boot-spi";
+					reg = <0x00000000 0x00100000>;
+					read-only;
+				};
+				partition@kernel {
+					label = "kernel-spi";
+					reg = <0x00100000 0x00500000>;
+					read-only;
+				};
+				partition@dtb {
+					label = "dtb-spi";
+					reg = <0x00600000 0x00100000>;
+					read-only;
+				};
+				partition@fs {
+					label = "file system-spi";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+		};
+
+		usb@22000 {
+			phy_type = "ulpi";
+			dr_mode = "host";
+		};
+
+		mdio@24000 {
+			phy0: ethernet-phy@0 {
+				interrupts = <1 1 0 0>;
+				reg = <0x0>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupts = <2 1 0 0>;
+				reg = <0x1>;
+			};
+			phy4: ethernet-phy@4 {
+				reg = <0x4>;
+			};
+			tbi-phy@5 {
+				device_type = "tbi-phy";
+				reg = <0x5>;
+			};
+		};
+
+		mdio@25000 {
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		ethernet@b0000 {
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		ethernet@b1000 {
+			phy-handle = <&phy4>;
+			tbi-handle = <&tbi0>;
+			phy-connection-type = "sgmii";
+		};
+
+		ethernet@b2000 {
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		par_io@e0100 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xe0100 0x60>;
+			ranges = <0x0 0xe0100 0x60>;
+			device_type = "par_io";
+			num-ports = <3>;
+			pio1: ucc_pin@01 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+					0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+					0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
+					0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9 */
+					0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
+					0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
+					0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
+					0x0  0xc  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
+					0x0  0x6  0x2  0x0  0x2  0x0    /* ENET1_RXD0_SER1_RXD0 */
+					0x0  0xa  0x2  0x0  0x2  0x0    /* ENET1_RXD1_SER1_RXD1 */
+					0x0  0xe  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
+					0x0  0xf  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
+					0x0  0x5  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
+					0x0  0xd  0x1  0x0  0x2  0x0    /* ENET1_TX_ER */
+					0x0  0x4  0x2  0x0  0x2  0x0    /* ENET1_RX_DV_SER1_CTS_B */
+					0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RX_ER_SER1_CD_B */
+					0x0  0x11 0x2  0x0  0x2  0x0    /* ENET1_CRS */
+					0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
+			};
+
+			pio2: ucc_pin@02 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+					0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+					0x1  0xb  0x2  0x0  0x1  0x0    /* CLK13 */
+					0x1  0x7  0x1  0x0  0x2  0x0    /* ENET5_TXD0_SER5_TXD0 */
+					0x1  0xa  0x1  0x0  0x2  0x0    /* ENET5_TXD1_SER5_TXD1 */
+					0x1  0x6  0x2  0x0  0x2  0x0    /* ENET5_RXD0_SER5_RXD0 */
+					0x1  0x9  0x2  0x0  0x2  0x0    /* ENET5_RXD1_SER5_RXD1 */
+					0x1  0x5  0x1  0x0  0x2  0x0    /* ENET5_TX_EN_SER5_RTS_B */
+					0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
+					0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
+			};
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		reg = <0 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe: qe@ffe80000 {
+		ranges = <0x0 0x0 0xffe80000 0x40000>;
+		reg = <0 0xffe80000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+		status = "disabled"; /* no firmware loaded */
+
+		enet3: ucc@2000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "clk12";
+			tx-clock-name = "clk9";
+			pio-handle = <&pio1>;
+			phy-handle = <&qe_phy0>;
+			phy-connection-type = "mii";
+		};
+
+		mdio@2120 {
+			qe_phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <4 1 0 0>;
+				reg = <0x0>;
+			};
+			qe_phy1: ethernet-phy@03 {
+				interrupt-parent = <&mpic>;
+				interrupts = <5 1 0 0>;
+				reg = <0x3>;
+			};
+			tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet4: ucc@2400 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk13";
+			pio-handle = <&pio2>;
+			phy-handle = <&qe_phy1>;
+			phy-connection-type = "rmii";
+		};
+	};
+};
+
+/include/ "p1021si-post.dtsi"
diff --git a/src/powerpc/fsl/p1021rdb-pc.dtsi b/src/powerpc/fsl/p1021rdb-pc.dtsi
new file mode 100644
index 000000000000..18f9b31602d0
--- /dev/null
+++ b/src/powerpc/fsl/p1021rdb-pc.dtsi
@@ -0,0 +1,256 @@
+/*
+ * P1021 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x1000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 256KB for Vitesse 7385 Switch firmware */
+			reg = <0x0 0x00040000>;
+			label = "NOR Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@80000 {
+			/* 3.5 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00380000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 10.75MB for JFFS2 based Root file System */
+			reg = <0x00400000 0x00ac0000>;
+			label = "NOR JFFS2 Root File System";
+		};
+
+		partition@ec0000 {
+			/* This location must not be altered  */
+			/* 256KB for QE ucode firmware*/
+			reg = <0x00ec0000 0x00040000>;
+			label = "NOR QE microcode firmware";
+			read-only;
+		};
+
+		partition@f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x00f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,p1021-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x1 0x0 0x40000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND DTB Image";
+		};
+
+		partition@200000 {
+			/* 4MB for Linux Kernel Image */
+			reg = <0x00200000 0x00400000>;
+			label = "NAND Linux Kernel Image";
+		};
+
+		partition@600000 {
+			/* 4MB for Compressed Root file System Image */
+			reg = <0x00600000 0x00400000>;
+			label = "NAND Compressed RFS Image";
+		};
+
+		partition@a00000 {
+			/* 7MB for JFFS2 based Root file System */
+			reg = <0x00a00000 0x00700000>;
+			label = "NAND JFFS2 Root File System";
+		};
+
+		partition@1100000 {
+			/* 15MB for User Writable Area  */
+			reg = <0x01100000 0x00f00000>;
+			label = "NAND Writable User area";
+		};
+	};
+
+	L2switch@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "vitesse-7385";
+		reg = <0x2 0x0 0x20000>;
+	};
+};
+
+&soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "pericom,pt7c4338";
+			reg = <0x68>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <40000000>; /* input clock */
+
+			partition@u-boot {
+				/* 512KB for u-boot Bootloader Image */
+				reg = <0x0 0x00080000>;
+				label = "SPI Flash U-Boot Image";
+				read-only;
+			};
+
+			partition@dtb {
+				/* 512KB for DTB Image */
+				reg = <0x00080000 0x00080000>;
+				label = "SPI Flash DTB Image";
+			};
+
+			partition@kernel {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00100000 0x00400000>;
+				label = "SPI Flash Linux Kernel Image";
+			};
+
+			partition@fs {
+				/* 4MB for Compressed RFS Image */
+				reg = <0x00500000 0x00400000>;
+				label = "SPI Flash Compressed RFSImage";
+			};
+
+			partition@jffs-fs {
+				/* 7MB for JFFS2 based RFS */
+				reg = <0x00900000 0x00700000>;
+				label = "SPI Flash JFFS2 RFS";
+			};
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupt-parent = <&mpic>;
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupt-parent = <&mpic>;
+			interrupts = <2 1 0 0>;
+			reg = <0x1>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@25000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26000 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	ptp_clock@b0e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0xb0e00 0xb0>;
+		interrupts = <68 2 0 0 69 2 0 0>;
+		fsl,tclk-period	= <10>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0x80000016>;
+		fsl,tmr-fiper1	= <999999990>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <199999999>;
+	};
+
+	enet0: ethernet@b0000 {
+		fixed-link = <1 1 1000 0 0>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		tbi-handle = <&tbi2>;
+		phy-connection-type = "rgmii-id";
+	};
+};
diff --git a/src/powerpc/fsl/p1021rdb-pc_32b.dts b/src/powerpc/fsl/p1021rdb-pc_32b.dts
new file mode 100644
index 000000000000..d2b4710357ac
--- /dev/null
+++ b/src/powerpc/fsl/p1021rdb-pc_32b.dts
@@ -0,0 +1,96 @@
+/*
+ * P1021 RDB Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1021si-pre.dtsi"
+/ {
+	model = "fsl,P1021RDB";
+	compatible = "fsl,P1021RDB-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xff800000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe: qe@ffe80000 {
+                ranges = <0x0 0x0 0xffe80000 0x40000>;
+                reg = <0 0xffe80000 0 0x480>;
+                brg-frequency = <0>;
+                bus-frequency = <0>;
+        };
+};
+
+/include/ "p1021rdb-pc.dtsi"
+/include/ "p1021si-post.dtsi"
diff --git a/src/powerpc/fsl/p1021rdb-pc_36b.dts b/src/powerpc/fsl/p1021rdb-pc_36b.dts
new file mode 100644
index 000000000000..e298c29e5606
--- /dev/null
+++ b/src/powerpc/fsl/p1021rdb-pc_36b.dts
@@ -0,0 +1,96 @@
+/*
+ * P1021 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1021si-pre.dtsi"
+/ {
+	model = "fsl,P1021RDB";
+	compatible = "fsl,P1021RDB-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+			  0x1 0x0 0xf 0xff800000 0x00040000
+			  0x2 0x0 0xf 0xffb00000 0x00020000>;
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		reg = <0xf 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe: qe@fffe80000 {
+                ranges = <0x0 0xf 0xffe80000 0x40000>;
+                reg = <0xf 0xffe80000 0 0x480>;
+                brg-frequency = <0>;
+                bus-frequency = <0>;
+        };
+};
+
+/include/ "p1021rdb-pc.dtsi"
+/include/ "p1021si-post.dtsi"
diff --git a/src/powerpc/fsl/p1021si-post.dtsi b/src/powerpc/fsl/p1021si-post.dtsi
new file mode 100644
index 000000000000..407cb5fd0f5b
--- /dev/null
+++ b/src/powerpc/fsl/p1021si-post.dtsi
@@ -0,0 +1,247 @@
+/*
+ * P1021/P1012 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <19 2 0 0>,
+		     <16 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xa000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,p1021-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,p1021-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,p1021-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+	spi@7000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,p1021-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
+
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		sdhci,auto-cmd12;
+	};
+
+/include/ "pq3-sec3.3-0.dtsi"
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+	enet0: enet0_grp2: ethernet@b0000 {
+	};
+
+/include/ "pq3-etsec2-1.dtsi"
+	enet1: enet1_grp2: ethernet@b1000 {
+	};
+
+/include/ "pq3-etsec2-2.dtsi"
+	enet2: enet2_grp2: ethernet@b2000 {
+	};
+
+	global-utilities@e0000 {
+		compatible = "fsl,p1021-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
+
+&qe {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "qe";
+	compatible = "fsl,qe";
+	fsl,qe-num-riscs = <1>;
+	fsl,qe-num-snums = <28>;
+
+	qeic: interrupt-controller@80 {
+		interrupt-controller;
+		compatible = "fsl,qe-ic";
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		interrupts = <63 2 0 0 60 2 0 0>; //high:47 low:44
+	};
+
+	ucc@2000 {
+		cell-index = <1>;
+		reg = <0x2000 0x200>;
+		interrupts = <32>;
+		interrupt-parent = <&qeic>;
+	};
+
+	mdio@2120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x2120 0x18>;
+		compatible = "fsl,ucc-mdio";
+	};
+
+	ucc@2400 {
+		cell-index = <5>;
+		reg = <0x2400 0x200>;
+		interrupts = <40>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@2600 {
+		cell-index = <7>;
+		reg = <0x2600 0x200>;
+		interrupts = <42>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@2200 {
+		cell-index = <3>;
+		reg = <0x2200 0x200>;
+		interrupts = <34>;
+		interrupt-parent = <&qeic>;
+	};
+
+	muram@10000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,qe-muram", "fsl,cpm-muram";
+		ranges = <0x0 0x10000 0x6000>;
+
+		data-only@0 {
+			compatible = "fsl,qe-muram-data",
+			"fsl,cpm-muram-data";
+			reg = <0x0 0x6000>;
+		};
+	};
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"
+/include/ "pq3-etsec2-grp2-2.dtsi"
diff --git a/src/powerpc/fsl/p1021si-pre.dtsi b/src/powerpc/fsl/p1021si-pre.dtsi
new file mode 100644
index 000000000000..36161b500176
--- /dev/null
+++ b/src/powerpc/fsl/p1021si-pre.dtsi
@@ -0,0 +1,71 @@
+/*
+ * P1021/P1012 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,P1021";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1021@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1021@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/p1022ds.dtsi b/src/powerpc/fsl/p1022ds.dtsi
new file mode 100644
index 000000000000..ddefbf64f7f8
--- /dev/null
+++ b/src/powerpc/fsl/p1022ds.dtsi
@@ -0,0 +1,239 @@
+/*
+ * P1022 DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			reg = <0x0 0x03000000>;
+			label = "ramdisk-nor";
+			read-only;
+		};
+
+		partition@3000000 {
+			reg = <0x03000000 0x00e00000>;
+			label = "diagnostic-nor";
+			read-only;
+		};
+
+		partition@3e00000 {
+			reg = <0x03e00000 0x00200000>;
+			label = "dink-nor";
+			read-only;
+		};
+
+		partition@4000000 {
+			reg = <0x04000000 0x00400000>;
+			label = "kernel-nor";
+			read-only;
+		};
+
+		partition@4400000 {
+			reg = <0x04400000 0x03b00000>;
+			label = "jffs2-nor";
+		};
+
+		partition@7f00000 {
+			reg = <0x07f00000 0x00080000>;
+			label = "dtb-nor";
+			read-only;
+		};
+
+		partition@7f80000 {
+			reg = <0x07f80000 0x00080000>;
+			label = "u-boot-nor";
+			read-only;
+		};
+	};
+
+	nand@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,elbc-fcm-nand";
+		reg = <0x2 0x0 0x40000>;
+
+		partition@0 {
+			reg = <0x0 0x02000000>;
+			label = "u-boot-nand";
+			read-only;
+		};
+
+		partition@2000000 {
+			reg = <0x02000000 0x10000000>;
+			label = "jffs2-nand";
+		};
+
+		partition@12000000 {
+			reg = <0x12000000 0x10000000>;
+			label = "ramdisk-nand";
+			read-only;
+		};
+
+		partition@22000000 {
+			reg = <0x22000000 0x04000000>;
+			label = "kernel-nand";
+		};
+
+		partition@26000000 {
+			reg = <0x26000000 0x01000000>;
+			label = "dtb-nand";
+			read-only;
+		};
+
+		partition@27000000 {
+			reg = <0x27000000 0x19000000>;
+			label = "reserved-nand";
+		};
+	};
+
+	board-control@3,0 {
+		compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
+		reg = <3 0 0x30>;
+		interrupt-parent = <&mpic>;
+		/*
+		 * IRQ8 is generated if the "EVENT" switch is pressed
+		 * and PX_CTL[EVESEL] is set to 00.
+		 */
+		interrupts = <8 0 0 0>;
+	};
+};
+
+&board_soc {
+	i2c@3100 {
+		wm8776:codec@1a {
+			compatible = "wlf,wm8776";
+			reg = <0x1a>;
+			/*
+			 * clock-frequency will be set by U-Boot if
+			 * the clock is enabled.
+			 */
+		};
+		rtc@68 {
+			compatible = "dallas,ds3232";
+			reg = <0x68>;
+			interrupts = <0x1 0x1 0 0>;
+		};
+		adt7461@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <40000000>; /* input clock */
+
+			partition@0 {
+				label = "u-boot-spi";
+				reg = <0x00000000 0x00100000>;
+				read-only;
+			};
+			partition@100000 {
+				label = "kernel-spi";
+				reg = <0x00100000 0x00500000>;
+				read-only;
+			};
+			partition@600000 {
+				label = "dtb-spi";
+				reg = <0x00600000 0x00100000>;
+				read-only;
+			};
+			partition@700000 {
+				label = "file system-spi";
+				reg = <0x00700000 0x00900000>;
+			};
+		};
+	};
+
+	ssi@15000 {
+		fsl,mode = "i2s-slave";
+		codec-handle = <&wm8776>;
+		fsl,ssi-asynchronous;
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	usb@23000 {
+		status = "disabled";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupts = <3 1 0 0>;
+			reg = <0x1>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <9 1 0 0>;
+			reg = <0x2>;
+		};
+		tbi-phy@2 {
+			device_type = "tbi-phy";
+			reg = <0x2>;
+		};
+	};
+
+	ptp_clock@b0e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0xb0e00 0xb0>;
+		interrupts = <68 2 0 0 69 2 0 0>;
+		fsl,tclk-period	= <5>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0xc01ebd3d>;
+		fsl,tmr-fiper1	= <999999995>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <266499999>;
+	};
+
+	ethernet@b0000 {
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	ethernet@b1000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};
diff --git a/src/powerpc/fsl/p1022ds_32b.dts b/src/powerpc/fsl/p1022ds_32b.dts
new file mode 100644
index 000000000000..5a7eaceb9e8e
--- /dev/null
+++ b/src/powerpc/fsl/p1022ds_32b.dts
@@ -0,0 +1,103 @@
+/*
+ * P1022 DS 32-bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1022si-pre.dtsi"
+/ {
+	model = "fsl,P1022DS";
+	compatible = "fsl,P1022DS";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_lbc: lbc: localbus@ffe05000 {
+		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
+			  0x1 0x0 0x0 0xe0000000 0x08000000
+			  0x2 0x0 0x0 0xff800000 0x00040000
+			  0x3 0x0 0x0 0xffdf0000 0x00008000>;
+		reg = <0x0 0xffe05000 0 0x1000>;
+	};
+
+	board_soc: soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0x0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci2: pcie@ffe0b000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		reg = <0 0xffe0b000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1022si-post.dtsi"
+/include/ "p1022ds.dtsi"
diff --git a/src/powerpc/fsl/p1022ds_36b.dts b/src/powerpc/fsl/p1022ds_36b.dts
new file mode 100644
index 000000000000..88063cd9e20a
--- /dev/null
+++ b/src/powerpc/fsl/p1022ds_36b.dts
@@ -0,0 +1,103 @@
+/*
+ * P1022 DS 36-bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1022si-pre.dtsi"
+/ {
+	model = "fsl,P1022DS";
+	compatible = "fsl,P1022DS";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_lbc: lbc: localbus@fffe05000 {
+		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
+			  0x1 0x0 0xf 0xe0000000 0x08000000
+			  0x2 0x0 0xf 0xff800000 0x00040000
+			  0x3 0x0 0xf 0xffdf0000 0x00008000>;
+		reg = <0xf 0xffe05000 0 0x1000>;
+	};
+
+	board_soc: soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		reg = <0xf 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci2: pcie@fffe0b000 {
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		reg = <0xf 0xffe0b000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1022si-post.dtsi"
+/include/ "p1022ds.dtsi"
diff --git a/src/powerpc/fsl/p1022rdk.dts b/src/powerpc/fsl/p1022rdk.dts
new file mode 100644
index 000000000000..29e8af1e3711
--- /dev/null
+++ b/src/powerpc/fsl/p1022rdk.dts
@@ -0,0 +1,188 @@
+/*
+ * P1022 RDK 32-bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1022si-pre.dtsi"
+/ {
+	model = "fsl,P1022RDK";
+	compatible = "fsl,P1022RDK";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_lbc: lbc: localbus@ffe05000 {
+		/* The P1022 RDK does not have any localbus devices */
+		status = "disabled";
+	};
+
+	board_soc: soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+
+		i2c@3100 {
+			wm8960:codec@1a {
+				compatible = "wlf,wm8960";
+				reg = <0x1a>;
+				/* MCLK source is a stand-alone oscillator */
+				clock-frequency = <12288000>;
+			};
+			rtc@68 {
+				compatible = "st,m41t62";
+				reg = <0x68>;
+			};
+			adt7461@4c{
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+			zl6100@21{
+				compatible = "isil,zl6100";
+				reg = <0x21>;
+			};
+			zl6100@24{
+				compatible = "isil,zl6100";
+				reg = <0x24>;
+			};
+			zl6100@26{
+				compatible = "isil,zl6100";
+				reg = <0x26>;
+			};
+			zl6100@29{
+				compatible = "isil,zl6100";
+				reg = <0x29>;
+			};
+		};
+
+		spi@7000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,m25p80", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <1000000>;
+				partition@0 {
+					label = "full-spi-flash";
+					reg = <0x00000000 0x00100000>;
+				};
+			};
+		};
+
+		ssi@15000 {
+			fsl,mode = "i2s-slave";
+			codec-handle = <&wm8960>;
+		};
+
+		usb@22000 {
+			phy_type = "ulpi";
+		};
+
+		usb@23000 {
+			phy_type = "ulpi";
+		};
+
+		mdio@24000 {
+			phy0: ethernet-phy@0 {
+				interrupts = <3 1 0 0>;
+				reg = <0x1>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupts = <9 1 0 0>;
+				reg = <0x2>;
+			};
+		};
+
+		mdio@25000 {
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		ethernet@b0000 {
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		ethernet@b1000 {
+			phy-handle = <&phy1>;
+			tbi-handle = <&tbi0>;
+			phy-connection-type = "sgmii";
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0x0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci2: pcie@ffe0b000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		reg = <0 0xffe0b000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1022si-post.dtsi"
diff --git a/src/powerpc/fsl/p1022si-post.dtsi b/src/powerpc/fsl/p1022si-post.dtsi
new file mode 100644
index 000000000000..5f51b7bfc064
--- /dev/null
+++ b/src/powerpc/fsl/p1022si-post.dtsi
@@ -0,0 +1,249 @@
+/*
+ * P1022/P1013 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/*
+	 * The localbus on the P1022 is not a simple-bus because of the eLBC
+	 * pin muxing when the DIU is enabled.
+	 */
+	compatible = "fsl,p1022-elbc", "fsl,elbc";
+	interrupts = <19 2 0 0>,
+		     <16 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xa000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xb000 */
+&pci2 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,p1022-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,p1022-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,p1022-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+	spi@7000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "pq3-dma-1.dtsi"
+	dma@c300 {
+		dma00: dma-channel@0 {
+			compatible = "fsl,ssi-dma-channel";
+		};
+		dma01: dma-channel@80 {
+			compatible = "fsl,ssi-dma-channel";
+		};
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+
+	display: display@10000 {
+		compatible = "fsl,diu", "fsl,p1022-diu";
+		reg = <0x10000 1000>;
+		interrupts = <64 2 0 0>;
+	};
+
+	ssi@15000 {
+		compatible = "fsl,mpc8610-ssi";
+		cell-index = <0>;
+		reg = <0x15000 0x100>;
+		interrupts = <75 2 0 0>;
+		fsl,playback-dma = <&dma00>;
+		fsl,capture-dma = <&dma01>;
+		fsl,fifo-depth = <15>;
+	};
+
+/include/ "pq3-sata2-0.dtsi"
+/include/ "pq3-sata2-1.dtsi"
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,p1022-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
+/include/ "pq3-usb2-dr-1.dtsi"
+	usb@23000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
+
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		compatible = "fsl,p1022-esdhc", "fsl,esdhc";
+		sdhci,auto-cmd12;
+	};
+
+/include/ "pq3-sec3.3-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+	enet0: enet0_grp2: ethernet@b0000 {
+		fsl,wake-on-filer;
+	};
+
+/include/ "pq3-etsec2-1.dtsi"
+	enet1: enet1_grp2: ethernet@b1000 {
+		fsl,wake-on-filer;
+	};
+
+	global-utilities@e0000 {
+		compatible = "fsl,p1022-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+
+	power@e0070{
+		compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
+		reg = <0xe0070 0x20>;
+	};
+
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"
diff --git a/src/powerpc/fsl/p1022si-pre.dtsi b/src/powerpc/fsl/p1022si-pre.dtsi
new file mode 100644
index 000000000000..de76ae8992c6
--- /dev/null
+++ b/src/powerpc/fsl/p1022si-pre.dtsi
@@ -0,0 +1,73 @@
+/*
+ * P1022/P1013 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,P1022";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		vga = &display;
+		display = &display;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1022@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1022@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/p1023rdb.dts b/src/powerpc/fsl/p1023rdb.dts
new file mode 100644
index 000000000000..9716ca64651c
--- /dev/null
+++ b/src/powerpc/fsl/p1023rdb.dts
@@ -0,0 +1,260 @@
+/*
+ * P1023 RDB Device Tree Source
+ *
+ * Copyright 2013 - 2014 Freescale Semiconductor Inc.
+ *
+ * Author: Chunhe Lan <Chunhe.Lan@freescale.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1023si-pre.dtsi"
+
+/ {
+	model = "fsl,P1023";
+	compatible = "fsl,P1023RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	qportals: qman-portals@ff000000 {
+		ranges = <0x0 0xf 0xff000000 0x200000>;
+	};
+
+	bportals: bman-portals@ff200000 {
+		ranges = <0x0 0xf 0xff200000 0x200000>;
+	};
+
+	soc: soc@ff600000 {
+		ranges = <0x0 0x0 0xff600000 0x200000>;
+
+		i2c@3000 {
+			eeprom@53 {
+				compatible = "at24,24c04";
+				reg = <0x53>;
+			};
+
+			rtc@6f {
+				compatible = "microchip,mcp7941x";
+				reg = <0x6f>;
+			};
+		};
+
+		usb@22000 {
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+	};
+
+	lbc: localbus@ff605000 {
+		reg = <0 0xff605000 0 0x1000>;
+
+		/* NOR, NAND Flashes */
+		ranges = <0x0 0x0 0x0 0xec000000 0x04000000
+			  0x1 0x0 0x0 0xffa00000 0x08000000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x04000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				/* 48MB for Root File System */
+				reg = <0x00000000 0x03000000>;
+				label = "NOR Root File System";
+			};
+
+			partition@3000000 {
+				/* 1MB for DTB Image */
+				reg = <0x03000000 0x00100000>;
+				label = "NOR DTB Image";
+			};
+
+			partition@3100000 {
+				/* 14MB for Linux Kernel Image */
+				reg = <0x03100000 0x00e00000>;
+				label = "NOR Linux Kernel Image";
+			};
+
+			partition@3f00000 {
+				/* This location must not be altered  */
+				/* 512KB for u-boot Bootloader Image */
+				/* 512KB for u-boot Environment Variables */
+				reg = <0x03f00000 0x00100000>;
+				label = "NOR U-Boot Image";
+				read-only;
+			};
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x40000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND DTB Image";
+			};
+
+			partition@200000 {
+				/* 14MB for Linux Kernel Image */
+				reg = <0x00200000 0x00e00000>;
+				label = "NAND Linux Kernel Image";
+			};
+
+			partition@1000000 {
+				/* 96MB for Root File System Image */
+				reg = <0x01000000 0x06000000>;
+				label = "NAND Root File System";
+			};
+
+			partition@7000000 {
+				/* 16MB for User Writable Area */
+				reg = <0x07000000 0x01000000>;
+				label = "NAND Writable User area";
+			};
+		};
+	};
+
+	pci0: pcie@ff60a000 {
+		reg = <0 0xff60a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		pcie@0 {
+			/* IRQ[0:3] are pulled up on board, set to active-low */
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x0 */
+				0000 0 0 1 &mpic 0 1 0 0
+				0000 0 0 2 &mpic 1 1 0 0
+				0000 0 0 3 &mpic 2 1 0 0
+				0000 0 0 4 &mpic 3 1 0 0
+				>;
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	board_pci1: pci1: pcie@ff609000 {
+		reg = <0 0xff609000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			/*
+			 * IRQ[4:6] only for PCIe, set to active-high,
+			 * IRQ[7] is pulled up on board, set to active-low
+			 */
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x0 */
+				0000 0 0 1 &mpic 4 2 0 0
+				0000 0 0 2 &mpic 5 2 0 0
+				0000 0 0 3 &mpic 6 2 0 0
+				0000 0 0 4 &mpic 7 1 0 0
+				>;
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci2: pcie@ff60b000 {
+		reg = <0 0xff60b000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			/*
+			 * IRQ[8:10] are pulled up on board, set to active-low
+			 * IRQ[11] only for PCIe, set to active-high,
+			 */
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x0 */
+				0000 0 0 1 &mpic 8 1 0 0
+				0000 0 0 2 &mpic 9 1 0 0
+				0000 0 0 3 &mpic 10 1 0 0
+				0000 0 0 4 &mpic 11 2 0 0
+				>;
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1023si-post.dtsi"
diff --git a/src/powerpc/fsl/p1023si-post.dtsi b/src/powerpc/fsl/p1023si-post.dtsi
new file mode 100644
index 000000000000..da6d3fc6ba41
--- /dev/null
+++ b/src/powerpc/fsl/p1023si-post.dtsi
@@ -0,0 +1,307 @@
+/*
+ * P1023/P1017 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <19 2 0 0>,
+		     <16 2 0 0>;
+};
+
+/* controller at 0xa000 */
+&pci0 {
+	compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+	};
+};
+
+/* controller at 0x9000 */
+&pci1 {
+	compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+	};
+};
+
+/* controller at 0xb000 */
+&pci2 {
+	compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+	};
+};
+
+&qportals {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x100000 0x1000>;
+		interrupts = <29 2 0 0>;
+		cell-index = <0>;
+	};
+	qportal1: qman-portal@4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4000 0x4000>, <0x101000 0x1000>;
+		interrupts = <31 2 0 0>;
+		cell-index = <1>;
+	};
+	qportal2: qman-portal@8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8000 0x4000>, <0x102000 0x1000>;
+		interrupts = <33 2 0 0>;
+		cell-index = <2>;
+	};
+};
+
+&bportals {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+
+	bman-portal@0 {
+		compatible = "fsl,bman-portal";
+		reg = <0x0 0x4000>, <0x100000 0x1000>;
+		interrupts = <30 2 0 0>;
+	};
+	bman-portal@4000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x4000 0x4000>, <0x101000 0x1000>;
+		interrupts = <32 2 0 0>;
+	};
+	bman-portal@8000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x8000 0x4000>, <0x102000 0x1000>;
+		interrupts = <34 2 0 0>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,p1023-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,p1023-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,p1023-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+	spi@7000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,p1023-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
+
+	crypto: crypto@300000 {
+		compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
+		fsl,sec-era = <3>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x30000 0x10000>;
+		ranges = <0 0x30000 0x10000>;
+		interrupts = <58 2 0 0>;
+
+		sec_jr0: jr@1000 {
+			compatible = "fsl,sec-v4.2-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+			reg = <0x1000 0x1000>;
+			interrupts = <45 2 0 0>;
+		};
+
+		sec_jr1: jr@2000 {
+			compatible = "fsl,sec-v4.2-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+			reg = <0x2000 0x1000>;
+			interrupts = <45 2 0 0>;
+		};
+
+		sec_jr2: jr@3000 {
+			compatible = "fsl,sec-v4.2-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+			reg = <0x3000 0x1000>;
+			interrupts = <57 2 0 0>;
+		};
+
+		sec_jr3: jr@4000 {
+			compatible = "fsl,sec-v4.2-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+			reg = <0x4000 0x1000>;
+			interrupts = <57 2 0 0>;
+		};
+
+		rtic@6000 {
+			compatible = "fsl,sec-v4.2-rtic",
+				     "fsl,sec-v4.0-rtic";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x6000 0x100>;
+			ranges = <0x0 0x6100 0xe00>;
+
+			rtic_a: rtic-a@0 {
+				compatible = "fsl,sec-v4.2-rtic-memory",
+					     "fsl,sec-v4.0-rtic-memory";
+				reg = <0x00 0x20 0x100 0x80>;
+			};
+
+			rtic_b: rtic-b@20 {
+				compatible = "fsl,sec-v4.2-rtic-memory",
+					     "fsl,sec-v4.0-rtic-memory";
+				reg = <0x20 0x20 0x200 0x80>;
+			};
+
+			rtic_c: rtic-c@40 {
+				compatible = "fsl,sec-v4.2-rtic-memory",
+					     "fsl,sec-v4.0-rtic-memory";
+				reg = <0x40 0x20 0x300 0x80>;
+			};
+
+			rtic_d: rtic-d@60 {
+				compatible = "fsl,sec-v4.2-rtic-memory",
+					     "fsl,sec-v4.0-rtic-memory";
+				reg = <0x60 0x20 0x500 0x80>;
+			};
+		};
+	};
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+	qman: qman@88000 {
+		compatible = "fsl,qman";
+		reg = <0x88000 0x1000>;
+		interrupts = <16 2 0 0>;
+		fsl,qman-portals = <&qportals>;
+		memory-region = <&qman_fqd &qman_pfdr>;
+	};
+
+	bman: bman@8a000 {
+		compatible = "fsl,bman";
+		reg = <0x8a000 0x1000>;
+		interrupts = <16 2 0 0>;
+		fsl,bman-portals = <&bportals>;
+		memory-region = <&bman_fbpr>;
+	};
+
+	global-utilities@e0000 {
+		compatible = "fsl,p1023-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/src/powerpc/fsl/p1023si-pre.dtsi b/src/powerpc/fsl/p1023si-pre.dtsi
new file mode 100644
index 000000000000..132a1521921a
--- /dev/null
+++ b/src/powerpc/fsl/p1023si-pre.dtsi
@@ -0,0 +1,79 @@
+/*
+ * P1023/P1017 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,P1023";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+
+		crypto = &crypto;
+		sec_jr0 = &sec_jr0;
+		sec_jr1 = &sec_jr1;
+		sec_jr2 = &sec_jr2;
+		sec_jr3 = &sec_jr3;
+		rtic_a = &rtic_a;
+		rtic_b = &rtic_b;
+		rtic_c = &rtic_c;
+		rtic_d = &rtic_d;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1023@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1023@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/p1024rdb.dtsi b/src/powerpc/fsl/p1024rdb.dtsi
new file mode 100644
index 000000000000..b4d05867f707
--- /dev/null
+++ b/src/powerpc/fsl/p1024rdb.dtsi
@@ -0,0 +1,228 @@
+/*
+ * P1024 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x1000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 256KB for Vitesse 7385 Switch firmware */
+			reg = <0x0 0x00040000>;
+			label = "NOR Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@80000 {
+			/* 3.5 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00380000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 11MB for JFFS2 based Root file System */
+			reg = <0x00400000 0x00b00000>;
+			label = "NOR JFFS2 Root File System";
+		};
+
+		partition@f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x00f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,p1020-fcm-nand",
+				 "fsl,elbc-fcm-nand";
+		reg = <0x1 0x0 0x40000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND DTB Image";
+		};
+
+		partition@200000 {
+			/* 4MB for Linux Kernel Image */
+			reg = <0x00200000 0x00400000>;
+			label = "NAND Linux Kernel Image";
+		};
+
+		partition@600000 {
+			/* 4MB for Compressed Root file System Image */
+			reg = <0x00600000 0x00400000>;
+			label = "NAND Compressed RFS Image";
+		};
+
+		partition@a00000 {
+			/* 15MB for JFFS2 based Root file System */
+			reg = <0x00a00000 0x00f00000>;
+			label = "NAND JFFS2 Root File System";
+		};
+
+		partition@1900000 {
+			/* 7MB for User Writable Area */
+			reg = <0x01900000 0x00700000>;
+			label = "NAND Writable User area";
+		};
+	};
+};
+
+&soc {
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,m25p80", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <40000000>;
+
+			partition@0 {
+				/* 512KB for u-boot Bootloader Image */
+				reg = <0x0 0x00080000>;
+				label = "SPI U-Boot Image";
+				read-only;
+			};
+
+			partition@80000 {
+				/* 512KB for DTB Image */
+				reg = <0x00080000 0x00080000>;
+				label = "SPI DTB Image";
+			};
+
+			partition@100000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00100000 0x00400000>;
+				label = "SPI Linux Kernel Image";
+			};
+
+			partition@500000 {
+				/* 4MB for Compressed RFS Image */
+				reg = <0x00500000 0x00400000>;
+				label = "SPI Compressed RFS Image";
+			};
+
+			partition@900000 {
+				/* 7MB for JFFS2 based RFS */
+				reg = <0x00900000 0x00700000>;
+				label = "SPI JFFS2 RFS";
+			};
+		};
+	};
+
+	i2c@3000 {
+		rtc@68 {
+			compatible = "dallas,ds1339";
+			reg = <0x68>;
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	usb@23000 {
+		status = "disabled";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <2 1 0 0>;
+			reg = <0x1>;
+		};
+		phy2: ethernet-phy@2 {
+			interrupts = <1 1 0 0>;
+			reg = <0x2>;
+		};
+	};
+
+	mdio@25000 {
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	ethernet@b0000 {
+		phy-handle = <&phy2>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	ethernet@b1000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi0>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@b2000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};
diff --git a/src/powerpc/fsl/p1024rdb_32b.dts b/src/powerpc/fsl/p1024rdb_32b.dts
new file mode 100644
index 000000000000..8b09b9d56ad1
--- /dev/null
+++ b/src/powerpc/fsl/p1024rdb_32b.dts
@@ -0,0 +1,87 @@
+/*
+ * P1024 RDB 32Bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1024RDB";
+	compatible = "fsl,P1024RDB";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0x0 0xffe05000 0 0x1000>;
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xff800000 0x00040000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		reg = <0x0 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0x0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1024rdb.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/src/powerpc/fsl/p1024rdb_36b.dts b/src/powerpc/fsl/p1024rdb_36b.dts
new file mode 100644
index 000000000000..e7093aef28f1
--- /dev/null
+++ b/src/powerpc/fsl/p1024rdb_36b.dts
@@ -0,0 +1,87 @@
+/*
+ * P1024 RDB 36Bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1024RDB";
+	compatible = "fsl,P1024RDB";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+			  0x1 0x0 0xf 0xff800000 0x00040000>;
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1024rdb.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/src/powerpc/fsl/p1025rdb.dtsi b/src/powerpc/fsl/p1025rdb.dtsi
new file mode 100644
index 000000000000..d44bb12debb0
--- /dev/null
+++ b/src/powerpc/fsl/p1025rdb.dtsi
@@ -0,0 +1,326 @@
+/*
+ * P1025 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x1000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 256KB for Vitesse 7385 Switch firmware */
+			reg = <0x0 0x00040000>;
+			label = "NOR Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@80000 {
+			/* 3.5 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00380000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 11MB for JFFS2 based Root file System */
+			reg = <0x00400000 0x00b00000>;
+			label = "NOR JFFS2 Root File System";
+		};
+
+		partition@f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x00f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,p1025-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x1 0x0 0x40000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND DTB Image";
+		};
+
+		partition@200000 {
+			/* 4MB for Linux Kernel Image */
+			reg = <0x00200000 0x00400000>;
+			label = "NAND Linux Kernel Image";
+		};
+
+		partition@600000 {
+			/* 4MB for Compressed Root file System Image */
+			reg = <0x00600000 0x00400000>;
+			label = "NAND Compressed RFS Image";
+		};
+
+		partition@a00000 {
+			/* 7MB for JFFS2 based Root file System */
+			reg = <0x00a00000 0x00700000>;
+			label = "NAND JFFS2 Root File System";
+		};
+
+		partition@1100000 {
+			/* 15MB for JFFS2 based Root file System */
+			reg = <0x01100000 0x00f00000>;
+			label = "NAND Writable User area";
+		};
+	};
+
+};
+
+&soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "dallas,ds1339";
+			reg = <0x68>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <40000000>; /* input clock */
+
+			partition@u-boot {
+				/* 512KB for u-boot Bootloader Image */
+				reg = <0x0 0x00080000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			partition@dtb {
+				/* 512KB for DTB Image */
+				reg = <0x00080000 0x00080000>;
+				label = "dtb";
+			};
+
+			partition@kernel {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00100000 0x00400000>;
+				label = "kernel";
+			};
+
+			partition@fs {
+				/* 4MB for Compressed RFS Image */
+				reg = <0x00500000 0x00400000>;
+				label = "file system";
+			};
+
+			partition@jffs-fs {
+				/* 7MB for JFFS2 based RFS */
+				reg = <0x00900000 0x00700000>;
+				label = "file system jffs2";
+			};
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	/* USB2 is shared with localbus, so it must be disabled
+	   by default. We can't put 'status = "disabled";' here
+	   since U-Boot doesn't clear the status property when
+	   it enables USB2. OTOH, U-Boot does create a new node
+	   when there isn't any. So, just comment it out.
+	usb@23000 {
+		phy_type = "ulpi";
+	};
+	*/
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupt-parent = <&mpic>;
+			interrupts = <3 1>;
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupt-parent = <&mpic>;
+			interrupts = <2 1>;
+			reg = <0x1>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@25000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26000 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		fixed-link = <1 1 1000 0 0>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	par_io@e0100 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xe0100 0x60>;
+		ranges = <0x0 0xe0100 0x60>;
+		device_type = "par_io";
+		num-ports = <3>;
+		pio1: ucc_pin@01 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+				0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+				0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
+				0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9 */
+				0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
+				0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
+				0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
+				0x0  0xc  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
+				0x0  0x6  0x2  0x0  0x2  0x0    /* ENET1_RXD0_SER1_RXD0 */
+				0x0  0xa  0x2  0x0  0x2  0x0    /* ENET1_RXD1_SER1_RXD1 */
+				0x0  0xe  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
+				0x0  0xf  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
+				0x0  0x5  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
+				0x0  0xd  0x1  0x0  0x2  0x0    /* ENET1_TX_ER */
+				0x0  0x4  0x2  0x0  0x2  0x0    /* ENET1_RX_DV_SER1_CTS_B */
+				0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RX_ER_SER1_CD_B */
+				0x0  0x11 0x2  0x0  0x2  0x0    /* ENET1_CRS */
+				0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
+		};
+
+		pio2: ucc_pin@02 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+				0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+				0x1  0xb  0x2  0x0  0x1  0x0    /* CLK13 */
+				0x1  0x7  0x1  0x0  0x2  0x0    /* ENET5_TXD0_SER5_TXD0 */
+				0x1  0xa  0x1  0x0  0x2  0x0    /* ENET5_TXD1_SER5_TXD1 */
+				0x1  0x6  0x2  0x0  0x2  0x0    /* ENET5_RXD0_SER5_RXD0 */
+				0x1  0x9  0x2  0x0  0x2  0x0    /* ENET5_RXD1_SER5_RXD1 */
+				0x1  0x5  0x1  0x0  0x2  0x0    /* ENET5_TX_EN_SER5_RTS_B */
+				0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
+				0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
+		};
+
+		pio3: ucc_pin@03 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x0  0x16 0x2  0x0  0x2  0x0    /* SER7_CD_B*/
+				0x0  0x12 0x2  0x0  0x2  0x0    /* SER7_CTS_B*/
+				0x0  0x13 0x1  0x0  0x2  0x0    /* SER7_RTS_B*/
+				0x0  0x14 0x2  0x0  0x2  0x0    /* SER7_RXD0*/
+				0x0  0x15 0x1  0x0  0x2  0x0>;    /* SER7_TXD0*/
+		};
+
+		pio4: ucc_pin@04 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x1  0x0  0x2  0x0  0x2  0x0    /* SER3_CD_B*/
+				0x0  0x1c 0x2  0x0  0x2  0x0    /* SER3_CTS_B*/
+				0x0  0x1d 0x1  0x0  0x2  0x0    /* SER3_RTS_B*/
+				0x0  0x1e 0x2  0x0  0x2  0x0    /* SER3_RXD0*/
+				0x0  0x1f 0x1  0x0  0x2  0x0>;    /* SER3_TXD0*/
+		};
+	};
+};
+
+&qe {
+	serial2: ucc@2600 {
+		device_type = "serial";
+		compatible = "ucc_uart";
+		port-number = <0>;
+		rx-clock-name = "brg6";
+		tx-clock-name = "brg6";
+		pio-handle = <&pio3>;
+	};
+
+	serial3: ucc@2200 {
+		device_type = "serial";
+		compatible = "ucc_uart";
+		port-number = <1>;
+		rx-clock-name = "brg2";
+		tx-clock-name = "brg2";
+		pio-handle = <&pio4>;
+	};
+};
diff --git a/src/powerpc/fsl/p1025rdb_32b.dts b/src/powerpc/fsl/p1025rdb_32b.dts
new file mode 100644
index 000000000000..b15acbaea34b
--- /dev/null
+++ b/src/powerpc/fsl/p1025rdb_32b.dts
@@ -0,0 +1,133 @@
+/*
+ * P1025 RDB Device Tree Source (32-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1021si-pre.dtsi"
+/ {
+	model = "fsl,P1025RDB";
+	compatible = "fsl,P1025RDB";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xff800000 0x00040000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe: qe@ffe80000 {
+		ranges = <0x0 0x0 0xffe80000 0x40000>;
+		reg = <0 0xffe80000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+		status = "disabled"; /* no firmware loaded */
+
+		enet3: ucc@2000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			rx-clock-name = "clk12";
+			tx-clock-name = "clk9";
+			pio-handle = <&pio1>;
+			phy-handle = <&qe_phy0>;
+			phy-connection-type = "mii";
+		};
+
+		mdio@2120 {
+			qe_phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <4 1 0 0>;
+				reg = <0x6>;
+			};
+			qe_phy1: ethernet-phy@03 {
+				interrupt-parent = <&mpic>;
+				interrupts = <5 1 0 0>;
+				reg = <0x3>;
+			};
+			tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet4: ucc@2400 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			rx-clock-name = "none";
+			tx-clock-name = "clk13";
+			pio-handle = <&pio2>;
+			phy-handle = <&qe_phy1>;
+			phy-connection-type = "rmii";
+		};
+	};
+};
+
+/include/ "p1025rdb.dtsi"
+/include/ "p1021si-post.dtsi"
diff --git a/src/powerpc/fsl/p1025rdb_36b.dts b/src/powerpc/fsl/p1025rdb_36b.dts
new file mode 100644
index 000000000000..b0ded5e8bd0b
--- /dev/null
+++ b/src/powerpc/fsl/p1025rdb_36b.dts
@@ -0,0 +1,93 @@
+/*
+ * P1025 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1021si-pre.dtsi"
+/ {
+	model = "fsl,P1025RDB";
+	compatible = "fsl,P1025RDB";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes */
+		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+			  0x1 0x0 0xf 0xff800000 0x00040000>;
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xe 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe: qe@fffe80000 {
+		status = "disabled"; /* no firmware loaded */
+	};
+
+};
+
+/include/ "p1025rdb.dtsi"
+/include/ "p1021si-post.dtsi"
diff --git a/src/powerpc/fsl/p1025twr.dts b/src/powerpc/fsl/p1025twr.dts
new file mode 100644
index 000000000000..9b8863b74b60
--- /dev/null
+++ b/src/powerpc/fsl/p1025twr.dts
@@ -0,0 +1,95 @@
+/*
+ * P1025 TWR Device Tree Source (32-bit address map)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1021si-pre.dtsi"
+/ {
+	model = "fsl,P1025";
+	compatible = "fsl,TWR-P1025";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		/* NOR Flash and SSD1289 */
+		ranges = <0x0 0x0 0x0 0xec000000 0x04000000
+			  0x2 0x0 0x0 0xe0000000 0x00020000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe: qe@ffe80000 {
+		ranges = <0x0 0x0 0xffe80000 0x40000>;
+		reg = <0 0xffe80000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+	};
+};
+
+/include/ "p1025twr.dtsi"
+/include/ "p1021si-post.dtsi"
diff --git a/src/powerpc/fsl/p1025twr.dtsi b/src/powerpc/fsl/p1025twr.dtsi
new file mode 100644
index 000000000000..08816fb474f5
--- /dev/null
+++ b/src/powerpc/fsl/p1025twr.dtsi
@@ -0,0 +1,292 @@
+/*
+ * P1025 TWR Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/{
+       aliases {
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+       };
+};
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x4000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 256KB for Vitesse 7385 Switch firmware */
+			reg = <0x0 0x00040000>;
+			label = "NOR Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@80000 {
+			/* 5.5 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00580000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 56.75MB for Root file System */
+			reg = <0x00600000 0x038c0000>;
+			label = "NOR Root File System";
+		};
+
+		partition@ec0000 {
+			/* This location must not be altered  */
+			/* 256KB for QE ucode firmware*/
+			reg = <0x03ec0000 0x00040000>;
+			label = "NOR QE microcode firmware";
+			read-only;
+		};
+
+		partition@f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x03f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	/* CS2 for Display */
+	display@2,0 {
+		compatible = "solomon,ssd1289fb";
+		reg = <0x2 0x0000 0x0004>;
+	};
+
+};
+
+&soc {
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@2 {
+			interrupt-parent = <&mpic>;
+			interrupts = <1 1 0 0>;
+			reg = <0x2>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupt-parent = <&mpic>;
+			interrupts = <2 1 0 0>;
+			reg = <0x1>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@25000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26000 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	ptp_clock@b0e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0xb0e00 0xb0>;
+		interrupts = <68 2 0 0 69 2 0 0>;
+		fsl,tclk-period	= <10>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0xc0000021>;
+		fsl,tmr-fiper1	= <999999990>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <133333332>;
+	};
+
+	enet0: ethernet@b0000 {
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	enet1: ethernet@b1000 {
+		status = "disabled";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	par_io@e0100 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xe0100 0x60>;
+		ranges = <0x0 0xe0100 0x60>;
+		device_type = "par_io";
+		num-ports = <3>;
+		pio1: ucc_pin@01 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+				0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+				0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
+				0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9 */
+				0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
+				0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
+				0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
+				0x0  0xc  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
+				0x0  0x6  0x2  0x0  0x2  0x0    /* ENET1_RXD0_SER1_RXD0 */
+				0x0  0xa  0x2  0x0  0x2  0x0    /* ENET1_RXD1_SER1_RXD1 */
+				0x0  0xe  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
+				0x0  0xf  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
+				0x0  0x5  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
+				0x0  0xd  0x1  0x0  0x2  0x0    /* ENET1_TX_ER */
+				0x0  0x4  0x2  0x0  0x2  0x0    /* ENET1_RX_DV_SER1_CTS_B */
+				0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RX_ER_SER1_CD_B */
+				0x0  0x11 0x2  0x0  0x2  0x0    /* ENET1_CRS */
+				0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
+		};
+
+		pio2: ucc_pin@02 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+				0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+				0x1  0xb  0x2  0x0  0x1  0x0    /* CLK13 */
+				0x1  0x7  0x1  0x0  0x2  0x0    /* ENET5_TXD0_SER5_TXD0 */
+				0x1  0xa  0x1  0x0  0x2  0x0    /* ENET5_TXD1_SER5_TXD1 */
+				0x1  0x6  0x2  0x0  0x2  0x0    /* ENET5_RXD0_SER5_RXD0 */
+				0x1  0x9  0x2  0x0  0x2  0x0    /* ENET5_RXD1_SER5_RXD1 */
+				0x1  0x5  0x1  0x0  0x2  0x0    /* ENET5_TX_EN_SER5_RTS_B */
+				0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
+				0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
+		};
+
+		pio3: ucc_pin@03 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x0  0x16 0x2  0x0  0x2  0x0    /* SER7_CD_B*/
+				0x0  0x12 0x2  0x0  0x2  0x0    /* SER7_CTS_B*/
+				0x0  0x13 0x1  0x0  0x2  0x0    /* SER7_RTS_B*/
+				0x0  0x14 0x2  0x0  0x2  0x0    /* SER7_RXD0*/
+				0x0  0x15 0x1  0x0  0x2  0x0>;    /* SER7_TXD0*/
+		};
+
+		pio4: ucc_pin@04 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x1  0x0  0x2  0x0  0x2  0x0    /* SER3_CD_B*/
+				0x0  0x1c 0x2  0x0  0x2  0x0    /* SER3_CTS_B*/
+				0x0  0x1d 0x1  0x0  0x2  0x0    /* SER3_RTS_B*/
+				0x0  0x1e 0x2  0x0  0x2  0x0    /* SER3_RXD0*/
+				0x0  0x1f 0x1  0x0  0x2  0x0>;    /* SER3_TXD0*/
+		};
+	};
+};
+
+&qe {
+	enet3: ucc@2000 {
+		device_type = "network";
+		compatible = "ucc_geth";
+		rx-clock-name = "clk12";
+		tx-clock-name = "clk9";
+		pio-handle = <&pio1>;
+		phy-handle = <&qe_phy0>;
+		phy-connection-type = "mii";
+	};
+
+	mdio@2120 {
+		qe_phy0: ethernet-phy@18 {
+			interrupt-parent = <&mpic>;
+			interrupts = <4 1 0 0>;
+			reg = <0x18>;
+			device_type = "ethernet-phy";
+		};
+		qe_phy1: ethernet-phy@19 {
+			interrupt-parent = <&mpic>;
+			interrupts = <5 1 0 0>;
+			reg = <0x19>;
+			device_type = "ethernet-phy";
+		};
+		tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet4: ucc@2400 {
+		device_type = "network";
+		compatible = "ucc_geth";
+		rx-clock-name = "none";
+		tx-clock-name = "clk13";
+		pio-handle = <&pio2>;
+		phy-handle = <&qe_phy1>;
+		phy-connection-type = "rmii";
+	};
+
+	serial2: ucc@2600 {
+		device_type = "serial";
+		compatible = "ucc_uart";
+		port-number = <0>;
+		rx-clock-name = "brg6";
+		tx-clock-name = "brg6";
+		pio-handle = <&pio3>;
+	};
+
+	serial3: ucc@2200 {
+		device_type = "serial";
+		compatible = "ucc_uart";
+		port-number = <1>;
+		rx-clock-name = "brg2";
+		tx-clock-name = "brg2";
+		pio-handle = <&pio4>;
+	};
+};
diff --git a/src/powerpc/fsl/p2020ds.dts b/src/powerpc/fsl/p2020ds.dts
new file mode 100644
index 000000000000..5ba06f753bc5
--- /dev/null
+++ b/src/powerpc/fsl/p2020ds.dts
@@ -0,0 +1,89 @@
+/*
+ * P2020 DS Device Tree Source
+ *
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p2020si-pre.dtsi"
+
+/ {
+	model = "fsl,P2020DS";
+	compatible = "fsl,P2020DS";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_lbc: lbc: localbus@ffe05000 {
+		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
+			  0x1 0x0 0x0 0xe0000000 0x08000000
+			  0x2 0x0 0x0 0xffa00000 0x00040000
+			  0x3 0x0 0x0 0xffdf0000 0x00008000
+			  0x4 0x0 0x0 0xffa40000 0x00040000
+			  0x5 0x0 0x0 0xffa80000 0x00040000
+			  0x6 0x0 0x0 0xffac0000 0x00040000>;
+		reg = <0 0xffe05000 0 0x1000>;
+	};
+
+	board_soc: soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci2: pcie@ffe08000 {
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		reg = <0 0xffe08000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	board_pci1: pci1: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	pci0: pcie@ffe0a000 {
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+};
+
+/*
+ * p2020ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "p2020si-post.dtsi"
+/include/ "p2020ds.dtsi"
diff --git a/src/powerpc/fsl/p2020ds.dtsi b/src/powerpc/fsl/p2020ds.dtsi
new file mode 100644
index 000000000000..e699cf95b063
--- /dev/null
+++ b/src/powerpc/fsl/p2020ds.dtsi
@@ -0,0 +1,327 @@
+/*
+ * P2020DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		ramdisk@0 {
+			reg = <0x0 0x03000000>;
+			read-only;
+		};
+
+		diagnostic@3000000 {
+			reg = <0x03000000 0x00e00000>;
+			read-only;
+		};
+
+		dink@3e00000 {
+			reg = <0x03e00000 0x00200000>;
+			read-only;
+		};
+
+		kernel@4000000 {
+			reg = <0x04000000 0x00400000>;
+			read-only;
+		};
+
+		jffs2@4400000 {
+			reg = <0x04400000 0x03b00000>;
+		};
+
+		dtb@7f00000 {
+			reg = <0x07f00000 0x00080000>;
+			read-only;
+		};
+
+		u-boot@7f80000 {
+			reg = <0x07f80000 0x00080000>;
+			read-only;
+		};
+	};
+
+	nand@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,elbc-fcm-nand";
+		reg = <0x2 0x0 0x40000>;
+
+		u-boot@0 {
+			reg = <0x0 0x02000000>;
+			read-only;
+		};
+
+		jffs2@2000000 {
+			reg = <0x02000000 0x10000000>;
+		};
+
+		ramdisk@12000000 {
+			reg = <0x12000000 0x08000000>;
+			read-only;
+		};
+
+		kernel@1a000000 {
+			reg = <0x1a000000 0x04000000>;
+		};
+
+		dtb@1e000000 {
+			reg = <0x1e000000 0x01000000>;
+			read-only;
+		};
+
+		empty@1f000000 {
+			reg = <0x1f000000 0x21000000>;
+		};
+	};
+
+	board-control@3,0 {
+		compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis";
+		reg = <0x3 0x0 0x30>;
+	};
+
+	nand@4,0 {
+		compatible = "fsl,elbc-fcm-nand";
+		reg = <0x4 0x0 0x40000>;
+	};
+
+	nand@5,0 {
+		compatible = "fsl,elbc-fcm-nand";
+		reg = <0x5 0x0 0x40000>;
+	};
+
+	nand@6,0 {
+		compatible = "fsl,elbc-fcm-nand";
+		reg = <0x6 0x0 0x40000>;
+	};
+};
+
+&board_soc {
+	usb@22000 {
+		phy_type = "ulpi";
+		dr_mode = "host";
+	};
+
+	mdio@24520 {
+		phy0: ethernet-phy@0 {
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <3 1 0 0>;
+			reg = <0x1>;
+		};
+		phy2: ethernet-phy@2 {
+			interrupts = <3 1 0 0>;
+			reg = <0x2>;
+		};
+
+		sgmii_phy1: sgmii-phy@1 {
+			interrupts = <5 1 0 0>;
+			reg = <0x1c>;
+		};
+		sgmii_phy2: sgmii-phy@2 {
+			interrupts = <5 1 0 0>;
+			reg = <0x1d>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+
+	};
+
+	mdio@25520 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26520 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+
+	};
+
+	ptp_clock@24e00 {
+		fsl,tclk-period = <5>;
+		fsl,tmr-prsc = <200>;
+		fsl,tmr-add = <0xCCCCCCCD>;
+		fsl,tmr-fiper1 = <0x3B9AC9FB>;
+		fsl,tmr-fiper2 = <0x0001869B>;
+		fsl,max-adj = <249999999>;
+	};
+
+	enet0: ethernet@24000 {
+		tbi-handle = <&tbi0>;
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	enet1: ethernet@25000 {
+		tbi-handle = <&tbi1>;
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	enet2: ethernet@26000 {
+		tbi-handle = <&tbi2>;
+		phy-handle = <&phy2>;
+		phy-connection-type = "rgmii-id";
+	};
+};
+
+&board_pci1 {
+	pcie@0 {
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			// IDSEL 0x11 func 0 - PCI slot 1
+			0x8800 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8800 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 1 - PCI slot 1
+			0x8900 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8900 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 2 - PCI slot 1
+			0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 3 - PCI slot 1
+			0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 4 - PCI slot 1
+			0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 5 - PCI slot 1
+			0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 6 - PCI slot 1
+			0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 7 - PCI slot 1
+			0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x1d  Audio
+			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+			// IDSEL 0x1e Legacy
+			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+			// IDSEL 0x1f IDE/SATA
+			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+			>;
+
+		uli1575@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+			isa@1e {
+				device_type = "isa";
+				#interrupt-cells = <2>;
+				#size-cells = <1>;
+				#address-cells = <2>;
+				reg = <0xf000 0x0 0x0 0x0 0x0>;
+				ranges = <0x1 0x0 0x1000000 0x0 0x0
+					  0x1000>;
+				interrupt-parent = <&i8259>;
+
+				i8259: interrupt-controller@20 {
+					reg = <0x1 0x20 0x2
+					       0x1 0xa0 0x2
+					       0x1 0x4d0 0x2>;
+					interrupt-controller;
+					device_type = "interrupt-controller";
+					#address-cells = <0>;
+					#interrupt-cells = <2>;
+					compatible = "chrp,iic";
+					interrupts = <4 1 0 0>;
+					interrupt-parent = <&mpic>;
+				};
+
+				i8042@60 {
+					#size-cells = <0>;
+					#address-cells = <1>;
+					reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+					interrupts = <1 3 12 3>;
+					interrupt-parent =
+						<&i8259>;
+
+					keyboard@0 {
+						reg = <0x0>;
+						compatible = "pnpPNP,303";
+					};
+
+					mouse@1 {
+						reg = <0x1>;
+						compatible = "pnpPNP,f03";
+					};
+				};
+
+				rtc@70 {
+					compatible = "pnpPNP,b00";
+					reg = <0x1 0x70 0x2>;
+				};
+
+				gpio@400 {
+					reg = <0x1 0x400 0x80>;
+				};
+			};
+		};
+	};
+};
diff --git a/src/powerpc/fsl/p2020rdb-pc.dtsi b/src/powerpc/fsl/p2020rdb-pc.dtsi
new file mode 100644
index 000000000000..03c9afc82436
--- /dev/null
+++ b/src/powerpc/fsl/p2020rdb-pc.dtsi
@@ -0,0 +1,241 @@
+/*
+ * P2020 RDB-PC Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x1000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 256KB for Vitesse 7385 Switch firmware */
+			reg = <0x0 0x00040000>;
+			label = "NOR Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@80000 {
+			/* 3.5 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00380000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 11MB for JFFS2 based Root file System */
+			reg = <0x00400000 0x00b00000>;
+			label = "NOR JFFS2 Root File System";
+		};
+
+		partition@f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x00f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,p2020-fcm-nand",
+				 "fsl,elbc-fcm-nand";
+		reg = <0x1 0x0 0x40000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND DTB Image";
+		};
+
+		partition@200000 {
+			/* 4MB for Linux Kernel Image */
+			reg = <0x00200000 0x00400000>;
+			label = "NAND Linux Kernel Image";
+		};
+
+		partition@600000 {
+			/* 4MB for Compressed Root file System Image */
+			reg = <0x00600000 0x00400000>;
+			label = "NAND Compressed RFS Image";
+		};
+
+		partition@a00000 {
+			/* 7MB for JFFS2 based Root file System */
+			reg = <0x00a00000 0x00700000>;
+			label = "NAND JFFS2 Root File System";
+		};
+
+		partition@1100000 {
+			/* 15MB for JFFS2 based Root file System */
+			reg = <0x01100000 0x00f00000>;
+			label = "NAND Writable User area";
+		};
+	};
+
+	L2switch@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "vitesse-7385";
+		reg = <0x2 0x0 0x20000>;
+	};
+
+	cpld@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cpld";
+		reg = <0x3 0x0 0x20000>;
+		read-only;
+	};
+};
+
+&soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "pericom,pt7c4338";
+			reg = <0x68>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,m25p80", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <40000000>;
+
+			partition@0 {
+				/* 512KB for u-boot Bootloader Image */
+				reg = <0x0 0x00080000>;
+				label = "SPI U-Boot Image";
+				read-only;
+			};
+
+			partition@80000 {
+				/* 512KB for DTB Image */
+				reg = <0x00080000 0x00080000>;
+				label = "SPI DTB Image";
+			};
+
+			partition@100000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00100000 0x00400000>;
+				label = "SPI Linux Kernel Image";
+			};
+
+			partition@500000 {
+				/* 4MB for Compressed RFS Image */
+				reg = <0x00500000 0x00400000>;
+				label = "SPI Compressed RFS Image";
+			};
+
+			partition@900000 {
+				/* 7MB for JFFS2 based RFS */
+				reg = <0x00900000 0x00700000>;
+				label = "SPI JFFS2 RFS";
+			};
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	mdio@24520 {
+		phy0: ethernet-phy@0 {
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+			};
+		phy1: ethernet-phy@1 {
+			interrupts = <2 1 0 0>;
+			reg = <0x1>;
+			};
+	};
+
+	mdio@25520 {
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26520 {
+		status = "disabled";
+	};
+
+	ptp_clock@24e00 {
+		fsl,tclk-period	= <5>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0xaaaaaaab>;
+		fsl,tmr-fiper1	= <999999995>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <299999999>;
+	};
+
+	enet0: ethernet@24000 {
+		fixed-link = <1 1 1000 0 0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	enet1: ethernet@25000 {
+		tbi-handle = <&tbi0>;
+		phy-handle = <&phy0>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@26000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};
diff --git a/src/powerpc/fsl/p2020rdb-pc_32b.dts b/src/powerpc/fsl/p2020rdb-pc_32b.dts
new file mode 100644
index 000000000000..d3295c204bbf
--- /dev/null
+++ b/src/powerpc/fsl/p2020rdb-pc_32b.dts
@@ -0,0 +1,96 @@
+/*
+ * P2020 RDB-PC 32Bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p2020si-pre.dtsi"
+
+/ {
+	model = "fsl,P2020RDB";
+	compatible = "fsl,P2020RDB-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		/* NOR and NAND Flashes */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xff800000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000
+			  0x3 0x0 0x0 0xffa00000 0x00020000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci2: pcie@ffe08000 {
+		reg = <0 0xffe08000 0 0x1000>;
+		status = "disabled";
+	};
+
+	pci1: pcie@ffe09000 {
+		reg = <0 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci0: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p2020rdb-pc.dtsi"
+/include/ "p2020si-post.dtsi"
diff --git a/src/powerpc/fsl/p2020rdb-pc_36b.dts b/src/powerpc/fsl/p2020rdb-pc_36b.dts
new file mode 100644
index 000000000000..9307a8f41ddb
--- /dev/null
+++ b/src/powerpc/fsl/p2020rdb-pc_36b.dts
@@ -0,0 +1,96 @@
+/*
+ * P2020 RDB-PC 36Bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p2020si-pre.dtsi"
+
+/ {
+	model = "fsl,P2020RDB";
+	compatible = "fsl,P2020RDB-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+
+		/* NOR and NAND Flashes */
+		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+			  0x1 0x0 0xf 0xff800000 0x00040000
+			  0x2 0x0 0xf 0xffb00000 0x00020000
+			  0x3 0x0 0xf 0xffa00000 0x00020000>;
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci2: pcie@fffe08000 {
+		reg = <0xf 0xffe08000 0 0x1000>;
+		status = "disabled";
+	};
+
+	pci1: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci0: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p2020rdb-pc.dtsi"
+/include/ "p2020si-post.dtsi"
diff --git a/src/powerpc/fsl/p2020rdb.dts b/src/powerpc/fsl/p2020rdb.dts
new file mode 100644
index 000000000000..435a319958cb
--- /dev/null
+++ b/src/powerpc/fsl/p2020rdb.dts
@@ -0,0 +1,291 @@
+/*
+ * P2020 RDB Device Tree Source
+ *
+ * Copyright 2009-2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p2020si-pre.dtsi"
+
+/ {
+	model = "fsl,P2020RDB";
+	compatible = "fsl,P2020RDB";
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		/* NOR and NAND Flashes */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xffa00000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x1000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 256KB for Vitesse 7385 Switch firmware */
+				reg = <0x0 0x00040000>;
+				label = "NOR (RO) Vitesse-7385 Firmware";
+				read-only;
+			};
+
+			partition@40000 {
+				/* 256KB for DTB Image */
+				reg = <0x00040000 0x00040000>;
+				label = "NOR (RO) DTB Image";
+				read-only;
+			};
+
+			partition@80000 {
+				/* 3.5 MB for Linux Kernel Image */
+				reg = <0x00080000 0x00380000>;
+				label = "NOR (RO) Linux Kernel Image";
+				read-only;
+			};
+
+			partition@400000 {
+				/* 11MB for JFFS2 based Root file System */
+				reg = <0x00400000 0x00b00000>;
+				label = "NOR (RW) JFFS2 Root File System";
+			};
+
+			partition@f00000 {
+				/* This location must not be altered  */
+				/* 512KB for u-boot Bootloader Image */
+				/* 512KB for u-boot Environment Variables */
+				reg = <0x00f00000 0x00100000>;
+				label = "NOR (RO) U-Boot Image";
+				read-only;
+			};
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p2020-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x40000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND (RO) U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND (RO) DTB Image";
+				read-only;
+			};
+
+			partition@200000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00200000 0x00400000>;
+				label = "NAND (RO) Linux Kernel Image";
+				read-only;
+			};
+
+			partition@600000 {
+				/* 4MB for Compressed Root file System Image */
+				reg = <0x00600000 0x00400000>;
+				label = "NAND (RO) Compressed RFS Image";
+				read-only;
+			};
+
+			partition@a00000 {
+				/* 7MB for JFFS2 based Root file System */
+				reg = <0x00a00000 0x00700000>;
+				label = "NAND (RW) JFFS2 Root File System";
+			};
+
+			partition@1100000 {
+				/* 15MB for JFFS2 based Root file System */
+				reg = <0x01100000 0x00f00000>;
+				label = "NAND (RW) Writable User area";
+			};
+		};
+
+		L2switch@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "vitesse-7385";
+			reg = <0x2 0x0 0x20000>;
+		};
+
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+
+		i2c@3000 {
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		spi@7000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25sl12801", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <40000000>;
+
+				partition@0 {
+					/* 512KB for u-boot Bootloader Image */
+					reg = <0x0 0x00080000>;
+					label = "SPI (RO) U-Boot Image";
+					read-only;
+				};
+
+				partition@80000 {
+					/* 512KB for DTB Image */
+					reg = <0x00080000 0x00080000>;
+					label = "SPI (RO) DTB Image";
+					read-only;
+				};
+
+				partition@100000 {
+					/* 4MB for Linux Kernel Image */
+					reg = <0x00100000 0x00400000>;
+					label = "SPI (RO) Linux Kernel Image";
+					read-only;
+				};
+
+				partition@500000 {
+					/* 4MB for Compressed RFS Image */
+					reg = <0x00500000 0x00400000>;
+					label = "SPI (RO) Compressed RFS Image";
+					read-only;
+				};
+
+				partition@900000 {
+					/* 7MB for JFFS2 based RFS */
+					reg = <0x00900000 0x00700000>;
+					label = "SPI (RW) JFFS2 RFS";
+				};
+			};
+		};
+
+		usb@22000 {
+			phy_type = "ulpi";
+			dr_mode = "host";
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@0 {
+				interrupts = <3 1 0 0>;
+				reg = <0x0>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupts = <3 1 0 0>;
+				reg = <0x1>;
+			};
+			tbi-phy@2 {
+				device_type = "tbi-phy";
+				reg = <0x2>;
+			};
+		};
+
+		mdio@25520 {
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@26520 {
+			status = "disabled";
+		};
+
+		ptp_clock@24e00 {
+			fsl,tclk-period = <5>;
+			fsl,tmr-prsc = <200>;
+			fsl,tmr-add = <0xCCCCCCCD>;
+			fsl,tmr-fiper1 = <0x3B9AC9FB>;
+			fsl,tmr-fiper2 = <0x0001869B>;
+			fsl,max-adj = <249999999>;
+		};
+
+		enet0: ethernet@24000 {
+			fixed-link = <1 1 1000 0 0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet1: ethernet@25000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "sgmii";
+		};
+
+		enet2: ethernet@26000 {
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+	};
+
+	pci0: pcie@ffe08000 {
+		reg = <0 0xffe08000 0 0x1000>;
+		status = "disabled";
+	};
+
+	pci1: pcie@ffe09000 {
+		reg = <0 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci2: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p2020si-post.dtsi"
diff --git a/src/powerpc/fsl/p2020si-post.dtsi b/src/powerpc/fsl/p2020si-post.dtsi
new file mode 100644
index 000000000000..884e01bcb243
--- /dev/null
+++ b/src/powerpc/fsl/p2020si-post.dtsi
@@ -0,0 +1,201 @@
+/*
+ * P2020/P2010 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0xa000 */
+&pci0 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <26 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <26 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0x9000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <25 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <25 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0x8000 */
+&pci2 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <24 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <24 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,p2020-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,p2020-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,p2020-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+	spi0: spi@7000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "pq3-dma-1.dtsi"
+/include/ "pq3-gpio-0.dtsi"
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,p2020-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x80000>; // L2,512K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-timer-0.dtsi"
+
+	ptp_clock@24e00 {
+		interrupts = <68 2 0 0 69 2 0 0 70 2 0 0>;
+	};
+
+
+/include/ "pq3-etsec1-1.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+	};
+
+/include/ "pq3-sec3.1-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+	global-utilities@e0000 {
+		compatible = "fsl,p2020-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/src/powerpc/fsl/p2020si-pre.dtsi b/src/powerpc/fsl/p2020si-pre.dtsi
new file mode 100644
index 000000000000..42bf3c6d25ca
--- /dev/null
+++ b/src/powerpc/fsl/p2020si-pre.dtsi
@@ -0,0 +1,72 @@
+/*
+ * P2020/P2010 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,P2020";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P2020@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P2020@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/p2041rdb.dts b/src/powerpc/fsl/p2041rdb.dts
new file mode 100644
index 000000000000..e50fea95a853
--- /dev/null
+++ b/src/powerpc/fsl/p2041rdb.dts
@@ -0,0 +1,340 @@
+/*
+ * P2041RDB Device Tree Source
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p2041si-pre.dtsi"
+
+/ {
+	model = "fsl,P2041RDB";
+	compatible = "fsl,P2041RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		phy_rgmii_0 = &phy_rgmii_0;
+		phy_rgmii_1 = &phy_rgmii_1;
+		phy_sgmii_2 = &phy_sgmii_2;
+		phy_sgmii_3 = &phy_sgmii_3;
+		phy_sgmii_4 = &phy_sgmii_4;
+		phy_sgmii_1c = &phy_sgmii_1c;
+		phy_sgmii_1d = &phy_sgmii_1d;
+		phy_sgmii_1e = &phy_sgmii_1e;
+		phy_sgmii_1f = &phy_sgmii_1f;
+		phy_xgmii_2 = &phy_xgmii_2;
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x200000>;
+	};
+
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25sl12801", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@u-boot {
+					label = "u-boot";
+					reg = <0x00000000 0x00100000>;
+					read-only;
+				};
+				partition@kernel {
+					label = "kernel";
+					reg = <0x00100000 0x00500000>;
+					read-only;
+				};
+				partition@dtb {
+					label = "dtb";
+					reg = <0x00600000 0x00100000>;
+					read-only;
+				};
+				partition@fs {
+					label = "file system";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+		};
+
+		i2c@118000 {
+			lm75b@48 {
+				compatible = "nxp,lm75a";
+				reg = <0x48>;
+			};
+			eeprom@50 {
+				compatible = "at24,24c256";
+				reg = <0x50>;
+			};
+			rtc@68 {
+				compatible = "pericom,pt7c4338";
+				reg = <0x68>;
+			};
+			adt7461@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c@118100 {
+			eeprom@50 {
+				compatible = "at24,24c256";
+				reg = <0x50>;
+			};
+		};
+
+		usb1: usb@211000 {
+			dr_mode = "host";
+		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				phy-handle = <&phy_sgmii_2>;
+				phy-connection-type = "sgmii";
+			};
+
+			mdio@e1120 {
+				phy_rgmii_0: ethernet-phy@0 {
+					reg = <0x0>;
+				};
+
+				phy_rgmii_1: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+
+				phy_sgmii_2: ethernet-phy@2 {
+					reg = <0x2>;
+				};
+
+				phy_sgmii_3: ethernet-phy@3 {
+					reg = <0x3>;
+				};
+
+				phy_sgmii_4: ethernet-phy@4 {
+					reg = <0x4>;
+				};
+
+				phy_sgmii_1c: ethernet-phy@1c {
+					reg = <0x1c>;
+				};
+
+				phy_sgmii_1d: ethernet-phy@1d {
+					reg = <0x1d>;
+				};
+
+				phy_sgmii_1e: ethernet-phy@1e {
+					reg = <0x1e>;
+				};
+
+				phy_sgmii_1f: ethernet-phy@1f {
+					reg = <0x1f>;
+				};
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy_sgmii_3>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_sgmii_4>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy_rgmii_1>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phy_rgmii_0>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&phy_xgmii_2>;
+				phy-connection-type = "xgmii";
+			};
+
+			mdio@f1000 {
+				phy_xgmii_2: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+				};
+			};
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  1 0 0xf 0xffa00000 0x00040000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x08000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x40000>;
+
+			partition@0 {
+				label = "NAND U-Boot Image";
+				reg = <0x0 0x02000000>;
+				read-only;
+			};
+
+			partition@2000000 {
+				label = "NAND Root File System";
+				reg = <0x02000000 0x10000000>;
+			};
+
+			partition@12000000 {
+				label = "NAND Compressed RFS Image";
+				reg = <0x12000000 0x08000000>;
+			};
+
+			partition@1a000000 {
+				label = "NAND Linux Kernel Image";
+				reg = <0x1a000000 0x04000000>;
+			};
+
+			partition@1e000000 {
+				label = "NAND DTB Image";
+				reg = <0x1e000000 0x01000000>;
+			};
+
+			partition@1f000000 {
+				label = "NAND Writable User area";
+				reg = <0x1f000000 0x01000000>;
+			};
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		reg = <0xf 0xfe201000 0 0x1000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe202000 {
+		reg = <0xf 0xfe202000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "p2041si-post.dtsi"
diff --git a/src/powerpc/fsl/p2041si-post.dtsi b/src/powerpc/fsl/p2041si-post.dtsi
new file mode 100644
index 000000000000..51e975d7631a
--- /dev/null
+++ b/src/powerpc/fsl/p2041si-post.dtsi
@@ -0,0 +1,460 @@
+/*
+ * P2041/P2040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&lbc {
+	compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <25 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 15>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 15>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x201000 */
+&pci1 {
+	compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 14>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 14>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x202000 */
+&pci2 {
+	compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 13>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 13>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <16 2 1 11>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,iommu-parent = <&pamu0>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+		fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+		fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,p2041-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,dcsr-npc";
+		reg = <0x1000 0x1000 0x1000000 0x8000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0xB0000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@40000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x40000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@41000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x41000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@42000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x42000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@43000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x43000 0x1000>;
+	};
+};
+
+/include/ "qoriq-bman1-portals.dtsi"
+
+/include/ "qoriq-qman1-portals.dtsi"
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000>;
+		interrupts = <16 2 1 27>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */
+		ranges = <0 0x20000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+		fsl,portid-mapping = <0x0f000000>;
+
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu1: pamu@1000 {
+			reg = <0x1000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu2: pamu@2000 {
+			reg = <0x2000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu3: pamu@3000 {
+			reg = <0x3000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};
+
+	pins: global-utilities@e0e00 {
+		compatible = "fsl,qoriq-pin-control-1.0";
+		reg = <0xe0e00 0x200>;
+		#sleep-cells = <2>;
+	};
+
+/include/ "qoriq-clockgen1.dtsi"
+	global-utilities@e1000 {
+		compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
+
+		mux2: mux2@40 {
+			#clock-cells = <0>;
+			reg = <0x40 0x4>;
+			compatible = "fsl,qoriq-core-mux-1.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+			clock-output-names = "cmux2";
+		};
+
+		mux3: mux3@60 {
+			#clock-cells = <0>;
+			reg = <0x60 0x4>;
+			compatible = "fsl,qoriq-core-mux-1.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+			clock-output-names = "cmux3";
+		};
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,qoriq-rcpm-1.0";
+		reg = <0xe2000 0x1000>;
+		#sleep-cells = <1>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,p2041-serdes";
+		reg	   = <0xea000 0x1000>;
+	};
+
+/include/ "qoriq-dma-0.dtsi"
+	dma@100300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+	};
+
+/include/ "qoriq-dma-1.dtsi"
+	dma@101300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+	};
+
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		compatible = "fsl,p2041-esdhc", "fsl,esdhc";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+		sdhci,auto-cmd12;
+	};
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+	usb0: usb@210000 {
+		compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+		phy_type = "utmi";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+		port0;
+	};
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+	usb1: usb@211000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+		dr_mode = "host";
+		phy_type = "utmi";
+	};
+
+/include/ "qoriq-sata2-0.dtsi"
+	sata@220000 {
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+	};
+
+/include/ "qoriq-sata2-1.dtsi"
+	sata@221000 {
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+	};
+
+/include/ "qoriq-sec4.2-0.dtsi"
+crypto: crypto@300000 {
+		fsl,iommu-parent = <&pamu1>;
+	};
+
+/include/ "qoriq-qman1.dtsi"
+/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-1g-4.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@f0000 {
+		};
+	};
+};
diff --git a/src/powerpc/fsl/p2041si-pre.dtsi b/src/powerpc/fsl/p2041si-pre.dtsi
new file mode 100644
index 000000000000..941274c41f21
--- /dev/null
+++ b/src/powerpc/fsl/p2041si-pre.dtsi
@@ -0,0 +1,130 @@
+/*
+ * P2041 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500mc_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,P2041";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+		msi0 = &msi0;
+		msi1 = &msi1;
+		msi2 = &msi2;
+
+		crypto = &crypto;
+		sec_jr0 = &sec_jr0;
+		sec_jr1 = &sec_jr1;
+		sec_jr2 = &sec_jr2;
+		sec_jr3 = &sec_jr3;
+		rtic_a = &rtic_a;
+		rtic_b = &rtic_b;
+		rtic_c = &rtic_c;
+		rtic_d = &rtic_d;
+		sec_mon = &sec_mon;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e500mc@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_0>;
+			fsl,portid-mapping = <0x80000000>;
+			L2_0: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e500mc@1 {
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&mux1>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x40000000>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu2: PowerPC,e500mc@2 {
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&mux2>;
+			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x20000000>;
+			L2_2: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu3: PowerPC,e500mc@3 {
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&mux3>;
+			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x10000000>;
+			L2_3: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};
diff --git a/src/powerpc/fsl/p3041ds.dts b/src/powerpc/fsl/p3041ds.dts
new file mode 100644
index 000000000000..40748e415adb
--- /dev/null
+++ b/src/powerpc/fsl/p3041ds.dts
@@ -0,0 +1,394 @@
+/*
+ * P3041DS Device Tree Source
+ *
+ * Copyright 2010 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p3041si-pre.dtsi"
+
+/ {
+	model = "fsl,P3041DS";
+	compatible = "fsl,P3041DS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases{
+		phy_rgmii_0 = &phy_rgmii_0;
+		phy_rgmii_1 = &phy_rgmii_1;
+		phy_sgmii_1c = &phy_sgmii_1c;
+		phy_sgmii_1d = &phy_sgmii_1d;
+		phy_sgmii_1e = &phy_sgmii_1e;
+		phy_sgmii_1f = &phy_sgmii_1f;
+		phy_xgmii_1 = &phy_xgmii_1;
+		phy_xgmii_2 = &phy_xgmii_2;
+		emi1_rgmii = &hydra_mdio_rgmii;
+		emi1_sgmii = &hydra_mdio_sgmii;
+		emi2_xgmii = &hydra_mdio_xgmii;
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x200000>;
+	};
+
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25sl12801", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <35000000>; /* input clock */
+				partition@u-boot {
+					label = "u-boot";
+					reg = <0x00000000 0x00100000>;
+					read-only;
+				};
+				partition@kernel {
+					label = "kernel";
+					reg = <0x00100000 0x00500000>;
+					read-only;
+				};
+				partition@dtb {
+					label = "dtb";
+					reg = <0x00600000 0x00100000>;
+					read-only;
+				};
+				partition@fs {
+					label = "file system";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+		};
+
+		i2c@118100 {
+			eeprom@51 {
+				compatible = "at24,24c256";
+				reg = <0x51>;
+			};
+			eeprom@52 {
+				compatible = "at24,24c256";
+				reg = <0x52>;
+			};
+		};
+
+		i2c@119100 {
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+			ina220@44 {
+				compatible = "ti,ina220";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+			ina220@45 {
+				compatible = "ti,ina220";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+			adt7461@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+
+		fman@400000{
+			ethernet@e0000 {
+				phy-handle = <&phy_sgmii_1c>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy_sgmii_1d>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_sgmii_1e>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy_sgmii_1f>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phy_rgmii_1>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&phy_xgmii_1>;
+				phy-connection-type = "xgmii";
+			};
+
+			hydra_mdio_xgmii: mdio@f1000 {
+				status = "disabled";
+
+				phy_xgmii_1: ethernet-phy@4 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x4>;
+				};
+
+				phy_xgmii_2: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+				};
+			};
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xffa00000 0x00040000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x08000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x2 0x0 0x40000>;
+
+			partition@0 {
+				label = "NAND U-Boot Image";
+				reg = <0x0 0x02000000>;
+				read-only;
+			};
+
+			partition@2000000 {
+				label = "NAND Root File System";
+				reg = <0x02000000 0x10000000>;
+			};
+
+			partition@12000000 {
+				label = "NAND Compressed RFS Image";
+				reg = <0x12000000 0x08000000>;
+			};
+
+			partition@1a000000 {
+				label = "NAND Linux Kernel Image";
+				reg = <0x1a000000 0x04000000>;
+			};
+
+			partition@1e000000 {
+				label = "NAND DTB Image";
+				reg = <0x1e000000 0x01000000>;
+			};
+
+			partition@1f000000 {
+				label = "NAND Writable User area";
+				reg = <0x1f000000 0x21000000>;
+			};
+		};
+
+		board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis";
+			reg = <3 0 0x30>;
+			ranges = <0 3 0 0x30>;
+
+			mdio-mux-emi1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "mdio-mux-mmioreg", "mdio-mux";
+				mdio-parent-bus = <&mdio0>;
+				reg = <9 1>;
+				mux-mask = <0x78>;
+
+				hydra_mdio_rgmii: rgmii-mdio@8 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <8>;
+					status = "disabled";
+
+					phy_rgmii_0: ethernet-phy@0 {
+						reg = <0x0>;
+					};
+
+					phy_rgmii_1: ethernet-phy@1 {
+						reg = <0x1>;
+					};
+				};
+
+				hydra_mdio_sgmii: sgmii-mdio@28 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x28>;
+					status = "disabled";
+
+					phy_sgmii_1c: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					phy_sgmii_1d: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					phy_sgmii_1e: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					phy_sgmii_1f: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+			};
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		reg = <0xf 0xfe201000 0 0x1000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe202000 {
+		reg = <0xf 0xfe202000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe203000 {
+		reg = <0xf 0xfe203000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "p3041si-post.dtsi"
diff --git a/src/powerpc/fsl/p3041si-post.dtsi b/src/powerpc/fsl/p3041si-post.dtsi
new file mode 100644
index 000000000000..187676fa8d83
--- /dev/null
+++ b/src/powerpc/fsl/p3041si-post.dtsi
@@ -0,0 +1,487 @@
+/*
+ * P3041 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&lbc {
+	compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <25 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 15>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 15>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x201000 */
+&pci1 {
+	compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 14>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 14>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x202000 */
+&pci2 {
+	compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 13>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 13>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x203000 */
+&pci3 {
+	compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 12>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 12>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 43 1 0 0
+			0000 0 0 2 &mpic 0 1 0 0
+			0000 0 0 3 &mpic 4 1 0 0
+			0000 0 0 4 &mpic 8 1 0 0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <16 2 1 11>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,iommu-parent = <&pamu0>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+		fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+		fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,p3041-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,dcsr-npc";
+		reg = <0x1000 0x1000 0x1000000 0x8000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0xB0000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,p3041-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,p3041-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,p3041-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,p3041-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@40000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x40000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@41000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x41000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@42000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x42000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@43000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x43000 0x1000>;
+	};
+};
+
+/include/ "qoriq-bman1-portals.dtsi"
+
+/include/ "qoriq-qman1-portals.dtsi"
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000>;
+		interrupts = <16 2 1 27>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */
+		ranges = <0 0x20000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+		fsl,portid-mapping = <0x0f000000>;
+
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu1: pamu@1000 {
+			reg = <0x1000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu2: pamu@2000 {
+			reg = <0x2000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu3: pamu@3000 {
+			reg = <0x3000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};
+
+	pins: global-utilities@e0e00 {
+		compatible = "fsl,qoriq-pin-control-1.0";
+		reg = <0xe0e00 0x200>;
+		#sleep-cells = <2>;
+	};
+
+/include/ "qoriq-clockgen1.dtsi"
+	global-utilities@e1000 {
+		compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
+
+		mux2: mux2@40 {
+			#clock-cells = <0>;
+			reg = <0x40 0x4>;
+			compatible = "fsl,qoriq-core-mux-1.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+			clock-output-names = "cmux2";
+		};
+
+		mux3: mux3@60 {
+			#clock-cells = <0>;
+			reg = <0x60 0x4>;
+			compatible = "fsl,qoriq-core-mux-1.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+			clock-output-names = "cmux3";
+		};
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,qoriq-rcpm-1.0";
+		reg = <0xe2000 0x1000>;
+		#sleep-cells = <1>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,p3041-serdes";
+		reg	   = <0xea000 0x1000>;
+	};
+
+/include/ "qoriq-dma-0.dtsi"
+	dma@100300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+	};
+
+/include/ "qoriq-dma-1.dtsi"
+	dma@101300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+	};
+
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		compatible = "fsl,p3041-esdhc", "fsl,esdhc";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+		sdhci,auto-cmd12;
+	};
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+	usb0: usb@210000 {
+		compatible = "fsl-usb2-mph-v1.6", "fsl-usb2-mph";
+		phy_type = "utmi";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+		port0;
+	};
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+	usb1: usb@211000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+		dr_mode = "host";
+		phy_type = "utmi";
+	};
+
+/include/ "qoriq-sata2-0.dtsi"
+	sata@220000 {
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+	};
+
+/include/ "qoriq-sata2-1.dtsi"
+	sata@221000 {
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+	};
+
+/include/ "qoriq-sec4.2-0.dtsi"
+crypto: crypto@300000 {
+		fsl,iommu-parent = <&pamu1>;
+	};
+
+/include/ "qoriq-qman1.dtsi"
+/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-1g-4.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@f0000 {
+		};
+	};
+};
diff --git a/src/powerpc/fsl/p3041si-pre.dtsi b/src/powerpc/fsl/p3041si-pre.dtsi
new file mode 100644
index 000000000000..50b73e8e638f
--- /dev/null
+++ b/src/powerpc/fsl/p3041si-pre.dtsi
@@ -0,0 +1,131 @@
+/*
+ * P3041 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500mc_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,P3041";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+		msi0 = &msi0;
+		msi1 = &msi1;
+		msi2 = &msi2;
+
+		crypto = &crypto;
+		sec_jr0 = &sec_jr0;
+		sec_jr1 = &sec_jr1;
+		sec_jr2 = &sec_jr2;
+		sec_jr3 = &sec_jr3;
+		rtic_a = &rtic_a;
+		rtic_b = &rtic_b;
+		rtic_c = &rtic_c;
+		rtic_d = &rtic_d;
+		sec_mon = &sec_mon;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e500mc@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_0>;
+			fsl,portid-mapping = <0x80000000>;
+			L2_0: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e500mc@1 {
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&mux1>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x40000000>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu2: PowerPC,e500mc@2 {
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&mux2>;
+			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x20000000>;
+			L2_2: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu3: PowerPC,e500mc@3 {
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&mux3>;
+			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x10000000>;
+			L2_3: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};
diff --git a/src/powerpc/fsl/p4080ds.dts b/src/powerpc/fsl/p4080ds.dts
new file mode 100644
index 000000000000..816b9788d5f6
--- /dev/null
+++ b/src/powerpc/fsl/p4080ds.dts
@@ -0,0 +1,400 @@
+/*
+ * P4080DS Device Tree Source
+ *
+ * Copyright 2009 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p4080si-pre.dtsi"
+
+/ {
+	model = "fsl,P4080DS";
+	compatible = "fsl,P4080DS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		phy_rgmii = &phyrgmii;
+		phy5_slot3 = &phy5slot3;
+		phy6_slot3 = &phy6slot3;
+		phy7_slot3 = &phy7slot3;
+		phy8_slot3 = &phy8slot3;
+		emi1_slot3 = &p4080mdio2;
+		emi1_slot4 = &p4080mdio1;
+		emi1_slot5 = &p4080mdio3;
+		emi1_rgmii = &p4080mdio0;
+		emi2_slot4 = &p4080xmdio1;
+		emi2_slot5 = &p4080xmdio3;
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x200000>;
+	};
+
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25sl12801", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@u-boot {
+					label = "u-boot";
+					reg = <0x00000000 0x00100000>;
+					read-only;
+				};
+				partition@kernel {
+					label = "kernel";
+					reg = <0x00100000 0x00500000>;
+					read-only;
+				};
+				partition@dtb {
+					label = "dtb";
+					reg = <0x00600000 0x00100000>;
+					read-only;
+				};
+				partition@fs {
+					label = "file system";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+		};
+
+		i2c@118100 {
+			eeprom@51 {
+				compatible = "at24,24c256";
+				reg = <0x51>;
+			};
+			eeprom@52 {
+				compatible = "at24,24c256";
+				reg = <0x52>;
+			};
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+			adt7461@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+
+		usb0: usb@210000 {
+			phy_type = "ulpi";
+		};
+
+		usb1: usb@211000 {
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				phy-handle = <&phy0>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy1>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy2>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy3>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&phy10>;
+				phy-connection-type = "xgmii";
+			};
+		};
+
+		fman@500000 {
+			ethernet@e0000 {
+				phy-handle = <&phy5>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy6>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy7>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy8>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&phy11>;
+				phy-connection-type = "xgmii";
+			};
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x08000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+
+		board-control@3,0 {
+			compatible = "fsl,p4080ds-fpga", "fsl,fpga-ngpixis";
+			reg = <3 0 0x30>;
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		reg = <0xf 0xfe201000 0 0x1000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe202000 {
+		reg = <0xf 0xfe202000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	mdio-mux-emi1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "mdio-mux-gpio", "mdio-mux";
+		mdio-parent-bus = <&mdio0>;
+		gpios = <&gpio0 1 0>, <&gpio0 0 0>;
+
+		p4080mdio0: mdio@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			phyrgmii: ethernet-phy@0 {
+				reg = <0x0>;
+			};
+		};
+
+		p4080mdio1: mdio@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			phy5: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy6: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy7: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy8: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		p4080mdio2: mdio@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			status = "disabled";
+
+			phy5slot3: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy6slot3: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy7slot3: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy8slot3: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		p4080mdio3: mdio@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			phy0: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy1: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy2: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy3: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+	};
+
+	mdio-mux-emi2 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "mdio-mux-gpio", "mdio-mux";
+		mdio-parent-bus = <&xmdio0>;
+		gpios = <&gpio0 3 0>, <&gpio0 2 0>;
+
+		p4080xmdio1: mdio@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			phy11: ethernet-phy@0 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				reg = <0x0>;
+			};
+		};
+
+		p4080xmdio3: mdio@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			phy10: ethernet-phy@4 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				reg = <0x4>;
+			};
+		};
+	};
+};
+
+/include/ "p4080si-post.dtsi"
diff --git a/src/powerpc/fsl/p4080si-post.dtsi b/src/powerpc/fsl/p4080si-post.dtsi
new file mode 100644
index 000000000000..a0252085f858
--- /dev/null
+++ b/src/powerpc/fsl/p4080si-post.dtsi
@@ -0,0 +1,562 @@
+/*
+ * P4080/P4040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&lbc {
+	compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <25 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 15>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 15>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x201000 */
+&pci1 {
+	compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 14>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 14>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x202000 */
+&pci2 {
+	compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 13>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 13>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <16 2 1 11>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,srio-rmu-handle = <&rmu>;
+	fsl,iommu-parent = <&pamu0>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+		fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+		fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,p4080-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,dcsr-npc";
+		reg = <0x1000 0x1000 0x1000000 0x8000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0xB0000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-ddr@13000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr2>;
+		reg = <0x13000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@40000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x40000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@41000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x41000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@42000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x42000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@43000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x43000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@44000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu4>;
+		reg = <0x44000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@45000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu5>;
+		reg = <0x45000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@46000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu6>;
+		reg = <0x46000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@47000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu7>;
+		reg = <0x47000 0x1000>;
+	};
+
+};
+
+/include/ "qoriq-bman1-portals.dtsi"
+
+/include/ "qoriq-qman1-portals.dtsi"
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	ddr2: memory-controller@9000 {
+		compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller";
+		reg = <0x9000 0x1000>;
+		interrupts = <16 2 1 22>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,p4080-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000
+		       0x11000 0x1000>;
+		interrupts = <16 2 1 27
+			      16 2 1 26>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x5000>; /* for compatibility with older PAMU drivers */
+		ranges = <0 0x20000 0x5000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+		fsl,portid-mapping = <0x00f80000>;
+
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu1: pamu@1000 {
+			reg = <0x1000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu2: pamu@2000 {
+			reg = <0x2000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu3: pamu@3000 {
+			reg = <0x3000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu4: pamu@4000 {
+			reg = <0x4000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+	};
+
+/include/ "qoriq-rmu-0.dtsi"
+	rmu@d3000 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x540>; /* RMULIODNR */
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};
+
+	pins: global-utilities@e0e00 {
+		compatible = "fsl,qoriq-pin-control-1.0";
+		reg = <0xe0e00 0x200>;
+		#sleep-cells = <2>;
+	};
+
+/include/ "qoriq-clockgen1.dtsi"
+	global-utilities@e1000 {
+		compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
+
+		pll2: pll2@840 {
+			#clock-cells = <1>;
+			reg = <0x840 0x4>;
+			compatible = "fsl,qoriq-core-pll-1.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll2", "pll2-div2";
+		};
+
+		pll3: pll3@860 {
+			#clock-cells = <1>;
+			reg = <0x860 0x4>;
+			compatible = "fsl,qoriq-core-pll-1.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll3", "pll3-div2";
+		};
+
+		mux2: mux2@40 {
+			#clock-cells = <0>;
+			reg = <0x40 0x4>;
+			compatible = "fsl,qoriq-core-mux-1.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+			clock-output-names = "cmux2";
+		};
+
+		mux3: mux3@60 {
+			#clock-cells = <0>;
+			reg = <0x60 0x4>;
+			compatible = "fsl,qoriq-core-mux-1.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+			clock-output-names = "cmux3";
+		};
+
+		mux4: mux4@80 {
+			#clock-cells = <0>;
+			reg = <0x80 0x4>;
+			compatible = "fsl,qoriq-core-mux-1.0";
+			clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
+			clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
+			clock-output-names = "cmux4";
+		};
+
+		mux5: mux5@a0 {
+			#clock-cells = <0>;
+			reg = <0xa0 0x4>;
+			compatible = "fsl,qoriq-core-mux-1.0";
+			clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
+			clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
+			clock-output-names = "cmux5";
+		};
+
+		mux6: mux6@c0 {
+			#clock-cells = <0>;
+			reg = <0xc0 0x4>;
+			compatible = "fsl,qoriq-core-mux-1.0";
+			clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
+			clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
+			clock-output-names = "cmux6";
+		};
+
+		mux7: mux7@e0 {
+			#clock-cells = <0>;
+			reg = <0xe0 0x4>;
+			compatible = "fsl,qoriq-core-mux-1.0";
+			clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
+			clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
+			clock-output-names = "cmux7";
+		};
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,qoriq-rcpm-1.0";
+		reg = <0xe2000 0x1000>;
+		#sleep-cells = <1>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,p4080-serdes";
+		reg	   = <0xea000 0x1000>;
+	};
+
+/include/ "qoriq-dma-0.dtsi"
+	dma@100300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+	};
+
+/include/ "qoriq-dma-1.dtsi"
+	dma@101300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+	};
+
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		compatible = "fsl,p4080-esdhc", "fsl,esdhc";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+		voltage-ranges = <3300 3300>;
+		sdhci,auto-cmd12;
+	};
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+	usb@210000 {
+		compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+		port0;
+	};
+/include/ "qoriq-usb2-dr-0.dtsi"
+	usb@211000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+	};
+/include/ "qoriq-sec4.0-0.dtsi"
+crypto: crypto@300000 {
+		fsl,iommu-parent = <&pamu1>;
+	};
+
+/include/ "qoriq-qman1.dtsi"
+/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@f0000 {
+		};
+	};
+
+/include/ "qoriq-fman-1.dtsi"
+/include/ "qoriq-fman-1-1g-0.dtsi"
+/include/ "qoriq-fman-1-1g-1.dtsi"
+/include/ "qoriq-fman-1-1g-2.dtsi"
+/include/ "qoriq-fman-1-1g-3.dtsi"
+/include/ "qoriq-fman-1-10g-0.dtsi"
+	fman@500000 {
+		enet5: ethernet@e0000 {
+		};
+
+		enet6: ethernet@e2000 {
+		};
+
+		enet7: ethernet@e4000 {
+		};
+
+		enet8: ethernet@e6000 {
+		};
+
+		enet9: ethernet@f0000 {
+		};
+	};
+};
diff --git a/src/powerpc/fsl/p4080si-pre.dtsi b/src/powerpc/fsl/p4080si-pre.dtsi
new file mode 100644
index 000000000000..d56a546b73e6
--- /dev/null
+++ b/src/powerpc/fsl/p4080si-pre.dtsi
@@ -0,0 +1,175 @@
+/*
+ * P4080/P4040 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500mc_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,P4080";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+		msi0 = &msi0;
+		msi1 = &msi1;
+		msi2 = &msi2;
+
+		crypto = &crypto;
+		sec_jr0 = &sec_jr0;
+		sec_jr1 = &sec_jr1;
+		sec_jr2 = &sec_jr2;
+		sec_jr3 = &sec_jr3;
+		rtic_a = &rtic_a;
+		rtic_b = &rtic_b;
+		rtic_c = &rtic_c;
+		rtic_d = &rtic_d;
+		sec_mon = &sec_mon;
+
+		fman0 = &fman0;
+		fman1 = &fman1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
+		ethernet8 = &enet8;
+		ethernet9 = &enet9;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e500mc@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_0>;
+			fsl,portid-mapping = <0x80000000>;
+			L2_0: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e500mc@1 {
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&mux1>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x40000000>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu2: PowerPC,e500mc@2 {
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&mux2>;
+			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x20000000>;
+			L2_2: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu3: PowerPC,e500mc@3 {
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&mux3>;
+			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x10000000>;
+			L2_3: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu4: PowerPC,e500mc@4 {
+			device_type = "cpu";
+			reg = <4>;
+			clocks = <&mux4>;
+			next-level-cache = <&L2_4>;
+			fsl,portid-mapping = <0x08000000>;
+			L2_4: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu5: PowerPC,e500mc@5 {
+			device_type = "cpu";
+			reg = <5>;
+			clocks = <&mux5>;
+			next-level-cache = <&L2_5>;
+			fsl,portid-mapping = <0x04000000>;
+			L2_5: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu6: PowerPC,e500mc@6 {
+			device_type = "cpu";
+			reg = <6>;
+			clocks = <&mux6>;
+			next-level-cache = <&L2_6>;
+			fsl,portid-mapping = <0x02000000>;
+			L2_6: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu7: PowerPC,e500mc@7 {
+			device_type = "cpu";
+			reg = <7>;
+			clocks = <&mux7>;
+			next-level-cache = <&L2_7>;
+			fsl,portid-mapping = <0x01000000>;
+			L2_7: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};
diff --git a/src/powerpc/fsl/p5020ds.dts b/src/powerpc/fsl/p5020ds.dts
new file mode 100644
index 000000000000..cd6f37386111
--- /dev/null
+++ b/src/powerpc/fsl/p5020ds.dts
@@ -0,0 +1,394 @@
+/*
+ * P5020DS Device Tree Source
+ *
+ * Copyright 2010 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p5020si-pre.dtsi"
+
+/ {
+	model = "fsl,P5020DS";
+	compatible = "fsl,P5020DS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		phy_rgmii_0 = &phy_rgmii_0;
+		phy_rgmii_1 = &phy_rgmii_1;
+		phy_sgmii_1c = &phy_sgmii_1c;
+		phy_sgmii_1d = &phy_sgmii_1d;
+		phy_sgmii_1e = &phy_sgmii_1e;
+		phy_sgmii_1f = &phy_sgmii_1f;
+		phy_xgmii_1 = &phy_xgmii_1;
+		phy_xgmii_2 = &phy_xgmii_2;
+		emi1_rgmii = &hydra_mdio_rgmii;
+		emi1_sgmii = &hydra_mdio_sgmii;
+		emi2_xgmii = &hydra_mdio_xgmii;
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x200000>;
+	};
+
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25sl12801", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@u-boot {
+					label = "u-boot";
+					reg = <0x00000000 0x00100000>;
+					read-only;
+				};
+				partition@kernel {
+					label = "kernel";
+					reg = <0x00100000 0x00500000>;
+					read-only;
+				};
+				partition@dtb {
+					label = "dtb";
+					reg = <0x00600000 0x00100000>;
+					read-only;
+				};
+				partition@fs {
+					label = "file system";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+		};
+
+		i2c@118100 {
+			eeprom@51 {
+				compatible = "at24,24c256";
+				reg = <0x51>;
+			};
+			eeprom@52 {
+				compatible = "at24,24c256";
+				reg = <0x52>;
+			};
+		};
+
+		i2c@119100 {
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+			ina220@44 {
+				compatible = "ti,ina220";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+			ina220@45 {
+				compatible = "ti,ina220";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+			adt7461@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				phy-handle = <&phy_sgmii_1c>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy_sgmii_1d>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_sgmii_1e>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy_sgmii_1f>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phy_rgmii_1>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&phy_xgmii_1>;
+				phy-connection-type = "xgmii";
+			};
+
+			hydra_mdio_xgmii: mdio@f1000 {
+				status = "disabled";
+
+				phy_xgmii_1: ethernet-phy@4 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x4>;
+				};
+
+				phy_xgmii_2: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+				};
+			};
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xffa00000 0x00040000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x08000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x2 0x0 0x40000>;
+
+			partition@0 {
+				label = "NAND U-Boot Image";
+				reg = <0x0 0x02000000>;
+				read-only;
+			};
+
+			partition@2000000 {
+				label = "NAND Root File System";
+				reg = <0x02000000 0x10000000>;
+			};
+
+			partition@12000000 {
+				label = "NAND Compressed RFS Image";
+				reg = <0x12000000 0x08000000>;
+			};
+
+			partition@1a000000 {
+				label = "NAND Linux Kernel Image";
+				reg = <0x1a000000 0x04000000>;
+			};
+
+			partition@1e000000 {
+				label = "NAND DTB Image";
+				reg = <0x1e000000 0x01000000>;
+			};
+
+			partition@1f000000 {
+				label = "NAND Writable User area";
+				reg = <0x1f000000 0x21000000>;
+			};
+		};
+
+		board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis";
+			reg = <3 0 0x30>;
+			ranges = <0 3 0 0x30>;
+
+			mdio-mux-emi1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "mdio-mux-mmioreg", "mdio-mux";
+				mdio-parent-bus = <&mdio0>;
+				reg = <9 1>;
+				mux-mask = <0x78>;
+
+				hydra_mdio_rgmii: rgmii-mdio@8 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <8>;
+					status = "disabled";
+
+					phy_rgmii_0: ethernet-phy@0 {
+						reg = <0x0>;
+					};
+
+					phy_rgmii_1: ethernet-phy@1 {
+						reg = <0x1>;
+					};
+				};
+
+				hydra_mdio_sgmii: sgmii-mdio@28 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x28>;
+					status = "disabled";
+
+					phy_sgmii_1c: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					phy_sgmii_1d: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					phy_sgmii_1e: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					phy_sgmii_1f: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+			};
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		reg = <0xf 0xfe201000 0 0x1000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe202000 {
+		reg = <0xf 0xfe202000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe203000 {
+		reg = <0xf 0xfe203000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "p5020si-post.dtsi"
diff --git a/src/powerpc/fsl/p5020si-post.dtsi b/src/powerpc/fsl/p5020si-post.dtsi
new file mode 100644
index 000000000000..cd008cdd2889
--- /dev/null
+++ b/src/powerpc/fsl/p5020si-post.dtsi
@@ -0,0 +1,478 @@
+/*
+ * P5020/5010 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&lbc {
+	compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <25 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 15>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 15>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x201000 */
+&pci1 {
+	compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 14>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 14>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x202000 */
+&pci2 {
+	compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 13>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 13>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x203000 */
+&pci3 {
+	compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 12>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x50c>; /* PEX4LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 12>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 43 1 0 0
+			0000 0 0 2 &mpic 0 1 0 0
+			0000 0 0 3 &mpic 4 1 0 0
+			0000 0 0 4 &mpic 8 1 0 0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <16 2 1 11>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,iommu-parent = <&pamu0>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+		fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+		fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,p5020-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,dcsr-npc";
+		reg = <0x1000 0x1000 0x1000000 0x8000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0xB0000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-ddr@13000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr2>;
+		reg = <0x13000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@40000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x40000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@41000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x41000 0x1000>;
+	};
+};
+
+/include/ "qoriq-bman1-portals.dtsi"
+
+/include/ "qoriq-qman1-portals.dtsi"
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	ddr2: memory-controller@9000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
+		reg = <0x9000 0x1000>;
+		interrupts = <16 2 1 22>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000
+		       0x11000 0x1000>;
+		interrupts = <16 2 1 27
+			      16 2 1 26>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */
+		ranges = <0 0x20000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+		fsl,portid-mapping = <0x3c000000>;
+
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu1: pamu@1000 {
+			reg = <0x1000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu2: pamu@2000 {
+			reg = <0x2000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu3: pamu@3000 {
+			reg = <0x3000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};
+
+	pins: global-utilities@e0e00 {
+		compatible = "fsl,qoriq-pin-control-1.0";
+		reg = <0xe0e00 0x200>;
+		#sleep-cells = <2>;
+	};
+
+/include/ "qoriq-clockgen1.dtsi"
+	global-utilities@e1000 {
+		compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,qoriq-rcpm-1.0";
+		reg = <0xe2000 0x1000>;
+		#sleep-cells = <1>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,p5020-serdes";
+		reg	   = <0xea000 0x1000>;
+	};
+
+/include/ "qoriq-dma-0.dtsi"
+	dma@100300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+	};
+
+/include/ "qoriq-dma-1.dtsi"
+	dma@101300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+	};
+
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		compatible = "fsl,p5020-esdhc", "fsl,esdhc";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+		sdhci,auto-cmd12;
+	};
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+	usb0: usb@210000 {
+		compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+		phy_type = "utmi";
+		port0;
+	};
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+	usb1: usb@211000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+		dr_mode = "host";
+		phy_type = "utmi";
+	};
+
+/include/ "qoriq-sata2-0.dtsi"
+	sata@220000 {
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+	};
+
+/include/ "qoriq-sata2-1.dtsi"
+	sata@221000 {
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+	};
+/include/ "qoriq-sec4.2-0.dtsi"
+	crypto@300000 {
+		fsl,iommu-parent = <&pamu1>;
+	};
+
+/include/ "qoriq-qman1.dtsi"
+/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-raid1.0-0.dtsi"
+	raideng@320000 {
+		fsl,iommu-parent = <&pamu1>;
+	};
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-1g-4.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@f0000 {
+		};
+	};
+};
diff --git a/src/powerpc/fsl/p5020si-pre.dtsi b/src/powerpc/fsl/p5020si-pre.dtsi
new file mode 100644
index 000000000000..bfba0b4f1cbb
--- /dev/null
+++ b/src/powerpc/fsl/p5020si-pre.dtsi
@@ -0,0 +1,117 @@
+/*
+ * P5020/P5010 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e5500_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,P5020";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+		msi0 = &msi0;
+		msi1 = &msi1;
+		msi2 = &msi2;
+
+		crypto = &crypto;
+		sec_jr0 = &sec_jr0;
+		sec_jr1 = &sec_jr1;
+		sec_jr2 = &sec_jr2;
+		sec_jr3 = &sec_jr3;
+		rtic_a = &rtic_a;
+		rtic_b = &rtic_b;
+		rtic_c = &rtic_c;
+		rtic_d = &rtic_d;
+		sec_mon = &sec_mon;
+
+		raideng = &raideng;
+		raideng_jr0 = &raideng_jr0;
+		raideng_jr1 = &raideng_jr1;
+		raideng_jr2 = &raideng_jr2;
+		raideng_jr3 = &raideng_jr3;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e5500@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_0>;
+			fsl,portid-mapping = <0x80000000>;
+			L2_0: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e5500@1 {
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&mux1>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x40000000>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};
diff --git a/src/powerpc/fsl/p5040ds.dts b/src/powerpc/fsl/p5040ds.dts
new file mode 100644
index 000000000000..45084738cf4e
--- /dev/null
+++ b/src/powerpc/fsl/p5040ds.dts
@@ -0,0 +1,486 @@
+/*
+ * P5040DS Device Tree Source
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of this
+ * software, even if advised of the possibility of such damage.
+ */
+
+/include/ "p5040si-pre.dtsi"
+
+/ {
+	model = "fsl,P5040DS";
+	compatible = "fsl,P5040DS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases{
+		phy_sgmii_slot2_1c = &phy_sgmii_slot2_1c;
+		phy_sgmii_slot2_1d = &phy_sgmii_slot2_1d;
+		phy_sgmii_slot2_1e = &phy_sgmii_slot2_1e;
+		phy_sgmii_slot2_1f = &phy_sgmii_slot2_1f;
+		phy_sgmii_slot3_1c = &phy_sgmii_slot3_1c;
+		phy_sgmii_slot3_1d = &phy_sgmii_slot3_1d;
+		phy_sgmii_slot3_1e = &phy_sgmii_slot3_1e;
+		phy_sgmii_slot3_1f = &phy_sgmii_slot3_1f;
+		phy_sgmii_slot5_1c = &phy_sgmii_slot5_1c;
+		phy_sgmii_slot5_1d = &phy_sgmii_slot5_1d;
+		phy_sgmii_slot5_1e = &phy_sgmii_slot5_1e;
+		phy_sgmii_slot5_1f = &phy_sgmii_slot5_1f;
+		phy_sgmii_slot6_1c = &phy_sgmii_slot6_1c;
+		phy_sgmii_slot6_1d = &phy_sgmii_slot6_1d;
+		phy_sgmii_slot6_1e = &phy_sgmii_slot6_1e;
+		phy_sgmii_slot6_1f = &phy_sgmii_slot6_1f;
+		hydra_rg = &hydra_rg;
+		hydra_sg_slot2 = &hydra_sg_slot2;
+		hydra_sg_slot3 = &hydra_sg_slot3;
+		hydra_sg_slot5 = &hydra_sg_slot5;
+		hydra_sg_slot6 = &hydra_sg_slot6;
+		hydra_xg_slot1 = &hydra_xg_slot1;
+		hydra_xg_slot2 = &hydra_xg_slot2;
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x200000>;
+	};
+
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25sl12801", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@u-boot {
+					label = "u-boot";
+					reg = <0x00000000 0x00100000>;
+				};
+				partition@kernel {
+					label = "kernel";
+					reg = <0x00100000 0x00500000>;
+				};
+				partition@dtb {
+					label = "dtb";
+					reg = <0x00600000 0x00100000>;
+				};
+				partition@fs {
+					label = "file system";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+		};
+
+		i2c@118100 {
+			eeprom@51 {
+				compatible = "at24,24c256";
+				reg = <0x51>;
+			};
+			eeprom@52 {
+				compatible = "at24,24c256";
+				reg = <0x52>;
+			};
+		};
+
+		i2c@119100 {
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+			ina220@44 {
+				compatible = "ti,ina220";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+			ina220@45 {
+				compatible = "ti,ina220";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+			adt7461@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phy_rgmii_0>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&phy_xgmii_slot_2>;
+				phy-connection-type = "xgmii";
+			};
+		};
+
+		fman@500000 {
+			ethernet@e0000 {
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phy_rgmii_1>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&phy_xgmii_slot_1>;
+				phy-connection-type = "xgmii";
+			};
+		};
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xffa00000 0x00040000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x08000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x2 0x0 0x40000>;
+
+			partition@0 {
+				label = "NAND U-Boot Image";
+				reg = <0x0 0x02000000>;
+			};
+
+			partition@2000000 {
+				label = "NAND Root File System";
+				reg = <0x02000000 0x10000000>;
+			};
+
+			partition@12000000 {
+				label = "NAND Compressed RFS Image";
+				reg = <0x12000000 0x08000000>;
+			};
+
+			partition@1a000000 {
+				label = "NAND Linux Kernel Image";
+				reg = <0x1a000000 0x04000000>;
+			};
+
+			partition@1e000000 {
+				label = "NAND DTB Image";
+				reg = <0x1e000000 0x01000000>;
+			};
+
+			partition@1f000000 {
+				label = "NAND Writable User area";
+				reg = <0x1f000000 0x01000000>;
+			};
+		};
+
+		board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p5040ds-fpga", "fsl,fpga-ngpixis";
+			reg = <3 0 0x40>;
+			ranges = <0 3 0 0x40>;
+
+			mdio-mux-emi1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "mdio-mux-mmioreg", "mdio-mux";
+				mdio-parent-bus = <&mdio0>;
+				reg = <9 1>;
+				mux-mask = <0x78>;
+
+				hydra_rg:rgmii-mdio@8 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <8>;
+					status = "disabled";
+
+					phy_rgmii_0: ethernet-phy@0 {
+						reg = <0x0>;
+					};
+
+					phy_rgmii_1: ethernet-phy@1 {
+						reg = <0x1>;
+					};
+				};
+
+				hydra_sg_slot2: sgmii-mdio@28 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x28>;
+					status = "disabled";
+
+					phy_sgmii_slot2_1c: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					phy_sgmii_slot2_1d: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					phy_sgmii_slot2_1e: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					phy_sgmii_slot2_1f: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+
+				hydra_sg_slot3: sgmii-mdio@68 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x68>;
+					status = "disabled";
+
+					phy_sgmii_slot3_1c: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					phy_sgmii_slot3_1d: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					phy_sgmii_slot3_1e: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					phy_sgmii_slot3_1f: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+
+				hydra_sg_slot5: sgmii-mdio@38 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x38>;
+					status = "disabled";
+
+					phy_sgmii_slot5_1c: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					phy_sgmii_slot5_1d: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					phy_sgmii_slot5_1e: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					phy_sgmii_slot5_1f: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+				hydra_sg_slot6: sgmii-mdio@48 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x48>;
+					status = "disabled";
+
+					phy_sgmii_slot6_1c: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					phy_sgmii_slot6_1d: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					phy_sgmii_slot6_1e: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					phy_sgmii_slot6_1f: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+			};
+
+			mdio-mux-emi2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "mdio-mux-mmioreg", "mdio-mux";
+				mdio-parent-bus = <&xmdio0>;
+				reg = <9 1>;
+				mux-mask = <0x06>;
+
+				hydra_xg_slot1: hydra-xg-slot1@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					status = "disabled";
+
+					phy_xgmii_slot_1: ethernet-phy@0 {
+						compatible = "ethernet-phy-ieee802.3-c45";
+						reg = <4>;
+					};
+				};
+
+				hydra_xg_slot2: hydra-xg-slot2@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+
+					phy_xgmii_slot_2: ethernet-phy@4 {
+						compatible = "ethernet-phy-ieee802.3-c45";
+						reg = <0>;
+					};
+				};
+			};
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		reg = <0xf 0xfe201000 0 0x1000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe202000 {
+		reg = <0xf 0xfe202000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "p5040si-post.dtsi"
diff --git a/src/powerpc/fsl/p5040si-post.dtsi b/src/powerpc/fsl/p5040si-post.dtsi
new file mode 100644
index 000000000000..e2bd9313e632
--- /dev/null
+++ b/src/powerpc/fsl/p5040si-post.dtsi
@@ -0,0 +1,480 @@
+/*
+ * P5040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of this
+ * software, even if advised of the possibility of such damage.
+ */
+
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&lbc {
+	compatible = "fsl,p5040-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <25 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 15>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 15>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x201000 */
+&pci1 {
+	compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 14>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 14>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x202000 */
+&pci2 {
+	compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 13>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 13>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,p5040-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,dcsr-npc";
+		reg = <0x1000 0x1000 0x1000000 0x8000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0xB0000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,p5040-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,p5040-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-ddr@13000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr2>;
+		reg = <0x13000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,p5040-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,p5040-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@40000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x40000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@41000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x41000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@42000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x42000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@43000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x43000 0x1000>;
+	};
+};
+
+/include/ "qoriq-bman1-portals.dtsi"
+
+/include/ "qoriq-qman1-portals.dtsi"
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	ddr2: memory-controller@9000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
+		reg = <0x9000 0x1000>;
+		interrupts = <16 2 1 22>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,p5040-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000
+		       0x11000 0x1000>;
+		interrupts = <16 2 1 27
+			      16 2 1 26>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x5000>; /* for compatibility with older PAMU drivers */
+		ranges = <0 0x20000 0x5000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <24 2 0 0
+			      16 2 1 30>;
+		fsl,portid-mapping = <0x0f800000>;
+
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu1: pamu@1000 {
+			reg = <0x1000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu2: pamu@2000 {
+			reg = <0x2000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu3: pamu@3000 {
+			reg = <0x3000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu4: pamu@4000 {
+			reg = <0x4000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,p5040-device-config", "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};
+
+	pins: global-utilities@e0e00 {
+		compatible = "fsl,p5040-pin-control", "fsl,qoriq-pin-control-1.0";
+		reg = <0xe0e00 0x200>;
+		#sleep-cells = <2>;
+	};
+
+/include/ "qoriq-clockgen1.dtsi"
+	global-utilities@e1000 {
+		compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0";
+
+		mux2: mux2@40 {
+			#clock-cells = <0>;
+			reg = <0x40 0x4>;
+			compatible = "fsl,qoriq-core-mux-1.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+			clock-output-names = "cmux2";
+		};
+
+		mux3: mux3@60 {
+			#clock-cells = <0>;
+			reg = <0x60 0x4>;
+			compatible = "fsl,qoriq-core-mux-1.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+			clock-output-names = "cmux3";
+		};
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,p5040-rcpm", "fsl,qoriq-rcpm-1.0";
+		reg = <0xe2000 0x1000>;
+		#sleep-cells = <1>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,p5040-sfp", "fsl,qoriq-sfp-1.0";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,p5040-serdes";
+		reg	   = <0xea000 0x1000>;
+	};
+
+/include/ "qoriq-dma-0.dtsi"
+	dma@100300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+	};
+
+/include/ "qoriq-dma-1.dtsi"
+	dma@101300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+	};
+
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		compatible = "fsl,p5040-esdhc", "fsl,esdhc";
+		fsl,iommu-parent = <&pamu2>;
+		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+		sdhci,auto-cmd12;
+	};
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+	usb0: usb@210000 {
+		compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+		fsl,iommu-parent = <&pamu4>;
+		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+		phy_type = "utmi";
+		port0;
+	};
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+	usb1: usb@211000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+		fsl,iommu-parent = <&pamu4>;
+		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+		dr_mode = "host";
+		phy_type = "utmi";
+	};
+
+/include/ "qoriq-sata2-0.dtsi"
+	sata@220000 {
+		fsl,iommu-parent = <&pamu4>;
+		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+	};
+
+/include/ "qoriq-sata2-1.dtsi"
+	sata@221000 {
+		fsl,iommu-parent = <&pamu4>;
+		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+	};
+
+/include/ "qoriq-sec5.2-0.dtsi"
+	crypto@300000 {
+		fsl,iommu-parent = <&pamu4>;
+	};
+
+/include/ "qoriq-raid1.0-0.dtsi"
+/include/ "qoriq-qman1.dtsi"
+/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-1g-4.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@f0000 {
+		};
+	};
+
+/include/ "qoriq-fman-1.dtsi"
+/include/ "qoriq-fman-1-1g-0.dtsi"
+/include/ "qoriq-fman-1-1g-1.dtsi"
+/include/ "qoriq-fman-1-1g-2.dtsi"
+/include/ "qoriq-fman-1-1g-3.dtsi"
+/include/ "qoriq-fman-1-1g-4.dtsi"
+/include/ "qoriq-fman-1-10g-0.dtsi"
+	fman@500000 {
+		enet6: ethernet@e0000 {
+		};
+
+		enet7: ethernet@e2000 {
+		};
+
+		enet8: ethernet@e4000 {
+		};
+
+		enet9: ethernet@e6000 {
+		};
+
+		enet10: ethernet@e8000 {
+		};
+
+		enet11: ethernet@f0000 {
+		};
+	};
+};
diff --git a/src/powerpc/fsl/p5040si-pre.dtsi b/src/powerpc/fsl/p5040si-pre.dtsi
new file mode 100644
index 000000000000..dbd57750fc02
--- /dev/null
+++ b/src/powerpc/fsl/p5040si-pre.dtsi
@@ -0,0 +1,143 @@
+/*
+ * P5040 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of this
+ * software, even if advised of the possibility of such damage.
+ */
+
+/dts-v1/;
+
+/include/ "e5500_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,P5040";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+		msi0 = &msi0;
+		msi1 = &msi1;
+		msi2 = &msi2;
+
+		crypto = &crypto;
+		sec_jr0 = &sec_jr0;
+		sec_jr1 = &sec_jr1;
+		sec_jr2 = &sec_jr2;
+		sec_jr3 = &sec_jr3;
+		rtic_a = &rtic_a;
+		rtic_b = &rtic_b;
+		rtic_c = &rtic_c;
+		rtic_d = &rtic_d;
+		sec_mon = &sec_mon;
+
+		raideng = &raideng;
+		raideng_jr0 = &raideng_jr0;
+		raideng_jr1 = &raideng_jr1;
+		raideng_jr2 = &raideng_jr2;
+		raideng_jr3 = &raideng_jr3;
+
+		fman0 = &fman0;
+		fman1 = &fman1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
+		ethernet8 = &enet8;
+		ethernet9 = &enet9;
+		ethernet10 = &enet10;
+		ethernet11 = &enet11;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e5500@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_0>;
+			fsl,portid-mapping = <0x80000000>;
+			L2_0: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e5500@1 {
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&mux1>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x40000000>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu2: PowerPC,e5500@2 {
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&mux2>;
+			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x20000000>;
+			L2_2: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu3: PowerPC,e5500@3 {
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&mux3>;
+			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x10000000>;
+			L2_3: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};
diff --git a/src/powerpc/fsl/ppa8548.dts b/src/powerpc/fsl/ppa8548.dts
new file mode 100644
index 000000000000..8f9ffbe0e4f4
--- /dev/null
+++ b/src/powerpc/fsl/ppa8548.dts
@@ -0,0 +1,164 @@
+/*
+ * PPA8548 Device Tree Source (36-bit address map)
+ * Copyright 2013 Prodrive B.V.
+ *
+ * Based on:
+ * MPC8548 CDS Device Tree Source (36-bit address map)
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc8548si-pre.dtsi"
+
+/ {
+	model = "ppa8548";
+	compatible = "ppa8548";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0x0 0x40000000>;
+	};
+
+	lbc: localbus@fe0005000 {
+		reg = <0xf 0xe0005000 0 0x1000>;
+		ranges = <0x0 0x0 0xf 0xff800000 0x00800000>;
+	};
+
+	soc: soc8548@fe0000000 {
+		ranges = <0 0xf 0xe0000000 0x100000>;
+	};
+
+	pci0: pci@fe0008000 {
+		/* ppa8548 board doesn't support PCI */
+		status = "disabled";
+	};
+
+	pci1: pci@fe0009000 {
+		/* ppa8548 board doesn't support PCI */
+		status = "disabled";
+	};
+
+	pci2: pcie@fe000a000 {
+		/* ppa8548 board doesn't support PCI */
+		status = "disabled";
+	};
+
+	rio: rapidio@fe00c0000 {
+		reg = <0xf 0xe00c0000 0x0 0x11000>;
+		port1 {
+			ranges = <0x0 0x0 0x0 0x80000000 0x0 0x40000000>;
+		};
+	};
+};
+
+&lbc {
+	nor@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x00800000>;
+		bank-width = <2>;
+		device-width = <2>;
+
+		partition@0 {
+			reg = <0x0 0x7A0000>;
+			label = "user";
+		};
+
+		partition@7A0000 {
+			reg = <0x7A0000 0x20000>;
+			label = "env";
+			read-only;
+		};
+
+		partition@7C0000 {
+			reg = <0x7C0000 0x40000>;
+			label = "u-boot";
+			read-only;
+		};
+	};
+};
+
+&soc {
+	i2c@3000 {
+		rtc@6f {
+			compatible = "intersil,isl1208";
+			reg = <0x6f>;
+		};
+	};
+
+	i2c@3100 {
+	};
+
+	/*
+	 * Only ethernet controller @25000 and @26000 are used.
+	 * Use alias enet2 and enet3 for the remainig controllers,
+	 * to stay compatible with mpc8548si-pre.dtsi.
+	 */
+	enet2: ethernet@24000 {
+		status = "disabled";
+	};
+
+	mdio@24520 {
+		phy0: ethernet-phy@0 {
+			interrupts = <7 1 0 0>;
+			reg = <0x0>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <8 1 0 0>;
+			reg = <0x1>;
+		};
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@25000 {
+		tbi-handle = <&tbi1>;
+		phy-handle = <&phy0>;
+	};
+
+	mdio@25520 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet1: ethernet@26000 {
+		tbi-handle = <&tbi2>;
+		phy-handle = <&phy1>;
+	};
+
+	mdio@26520 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet3: ethernet@27000 {
+		status = "disabled";
+	};
+
+	mdio@27520 {
+		tbi3: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	crypto@30000 {
+		status = "disabled";
+	};
+};
+
+/include/ "mpc8548si-post.dtsi"
diff --git a/src/powerpc/fsl/pq3-dma-0.dtsi b/src/powerpc/fsl/pq3-dma-0.dtsi
new file mode 100644
index 000000000000..b5b37ad30e75
--- /dev/null
+++ b/src/powerpc/fsl/pq3-dma-0.dtsi
@@ -0,0 +1,66 @@
+/*
+ * PQ3 DMA device tree stub [ controller @ offset 0x21000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma@21300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,eloplus-dma";
+	reg = <0x21300 0x4>;
+	ranges = <0x0 0x21100 0x200>;
+	cell-index = <0>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		cell-index = <0>;
+		interrupts = <20 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		cell-index = <1>;
+		interrupts = <21 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		cell-index = <2>;
+		interrupts = <22 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		cell-index = <3>;
+		interrupts = <23 2 0 0>;
+	};
+};
diff --git a/src/powerpc/fsl/pq3-dma-1.dtsi b/src/powerpc/fsl/pq3-dma-1.dtsi
new file mode 100644
index 000000000000..28cb8a55d807
--- /dev/null
+++ b/src/powerpc/fsl/pq3-dma-1.dtsi
@@ -0,0 +1,66 @@
+/*
+ * PQ3 DMA device tree stub [ controller @ offset 0xc300 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma@c300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,eloplus-dma";
+	reg = <0xc300 0x4>;
+	ranges = <0x0 0xc100 0x200>;
+	cell-index = <1>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		cell-index = <0>;
+		interrupts = <76 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		cell-index = <1>;
+		interrupts = <77 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		cell-index = <2>;
+		interrupts = <78 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		cell-index = <3>;
+		interrupts = <79 2 0 0>;
+	};
+};
diff --git a/src/powerpc/fsl/pq3-duart-0.dtsi b/src/powerpc/fsl/pq3-duart-0.dtsi
new file mode 100644
index 000000000000..5e268fdb9d1f
--- /dev/null
+++ b/src/powerpc/fsl/pq3-duart-0.dtsi
@@ -0,0 +1,51 @@
+/*
+ * PQ3 DUART device tree stub [ controller @ offset 0x4000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+serial0: serial@4500 {
+	cell-index = <0>;
+	device_type = "serial";
+	compatible = "fsl,ns16550", "ns16550";
+	reg = <0x4500 0x100>;
+	clock-frequency = <0>;
+	interrupts = <42 2 0 0>;
+};
+
+serial1: serial@4600 {
+	cell-index = <1>;
+	device_type = "serial";
+	compatible = "fsl,ns16550", "ns16550";
+	reg = <0x4600 0x100>;
+	clock-frequency = <0>;
+	interrupts = <42 2 0 0>;
+};
diff --git a/src/powerpc/fsl/pq3-esdhc-0.dtsi b/src/powerpc/fsl/pq3-esdhc-0.dtsi
new file mode 100644
index 000000000000..5743433e278e
--- /dev/null
+++ b/src/powerpc/fsl/pq3-esdhc-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 eSDHC device tree stub [ controller @ offset 0x2e000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sdhc@2e000 {
+	compatible = "fsl,esdhc";
+	reg = <0x2e000 0x1000>;
+	interrupts = <72 0x2 0 0>;
+	/* Filled in by U-Boot */
+	clock-frequency = <0>;
+};
diff --git a/src/powerpc/fsl/pq3-espi-0.dtsi b/src/powerpc/fsl/pq3-espi-0.dtsi
new file mode 100644
index 000000000000..75854b2e0391
--- /dev/null
+++ b/src/powerpc/fsl/pq3-espi-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 eSPI device tree stub [ controller @ offset 0x7000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+spi@7000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,mpc8536-espi";
+	reg = <0x7000 0x1000>;
+	interrupts = <59 0x2 0 0>;
+};
diff --git a/src/powerpc/fsl/pq3-etsec1-0.dtsi b/src/powerpc/fsl/pq3-etsec1-0.dtsi
new file mode 100644
index 000000000000..3b0650a98478
--- /dev/null
+++ b/src/powerpc/fsl/pq3-etsec1-0.dtsi
@@ -0,0 +1,54 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x24000 ]
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@24000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <0>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "gianfar";
+	reg = <0x24000 0x1000>;
+	ranges = <0x0 0x24000 0x1000>;
+	fsl,magic-packet;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+	interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
+};
+
+mdio@24520 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,gianfar-mdio";
+	reg = <0x24520 0x20>;
+};
diff --git a/src/powerpc/fsl/pq3-etsec1-1.dtsi b/src/powerpc/fsl/pq3-etsec1-1.dtsi
new file mode 100644
index 000000000000..96693b41f0f1
--- /dev/null
+++ b/src/powerpc/fsl/pq3-etsec1-1.dtsi
@@ -0,0 +1,54 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x25000 ]
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@25000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <1>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "gianfar";
+	reg = <0x25000 0x1000>;
+	ranges = <0x0 0x25000 0x1000>;
+	fsl,magic-packet;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+	interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
+};
+
+mdio@25520 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,gianfar-tbi";
+	reg = <0x25520 0x20>;
+};
diff --git a/src/powerpc/fsl/pq3-etsec1-2.dtsi b/src/powerpc/fsl/pq3-etsec1-2.dtsi
new file mode 100644
index 000000000000..6b3fab19da1f
--- /dev/null
+++ b/src/powerpc/fsl/pq3-etsec1-2.dtsi
@@ -0,0 +1,54 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x26000 ]
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@26000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <2>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "gianfar";
+	reg = <0x26000 0x1000>;
+	ranges = <0x0 0x26000 0x1000>;
+	fsl,magic-packet;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+	interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
+};
+
+mdio@26520 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,gianfar-tbi";
+	reg = <0x26520 0x20>;
+};
diff --git a/src/powerpc/fsl/pq3-etsec1-3.dtsi b/src/powerpc/fsl/pq3-etsec1-3.dtsi
new file mode 100644
index 000000000000..0da592d93ddd
--- /dev/null
+++ b/src/powerpc/fsl/pq3-etsec1-3.dtsi
@@ -0,0 +1,54 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x27000 ]
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@27000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <3>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "gianfar";
+	reg = <0x27000 0x1000>;
+	ranges = <0x0 0x27000 0x1000>;
+	fsl,magic-packet;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+	interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>;
+};
+
+mdio@27520 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,gianfar-tbi";
+	reg = <0x27520 0x20>;
+};
diff --git a/src/powerpc/fsl/pq3-etsec1-timer-0.dtsi b/src/powerpc/fsl/pq3-etsec1-timer-0.dtsi
new file mode 100644
index 000000000000..efe2ca04bce8
--- /dev/null
+++ b/src/powerpc/fsl/pq3-etsec1-timer-0.dtsi
@@ -0,0 +1,39 @@
+/*
+ * PQ3 eTSEC Timer (IEEE 1588) device tree stub [ @ offsets 0x24e00 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ptp_clock@24e00 {
+	compatible = "fsl,etsec-ptp";
+	reg = <0x24e00 0xb0>;
+	interrupts = <68 2 0 0 69 2 0 0>;
+};
diff --git a/src/powerpc/fsl/pq3-etsec2-0.dtsi b/src/powerpc/fsl/pq3-etsec2-0.dtsi
new file mode 100644
index 000000000000..7fcb1ac0f232
--- /dev/null
+++ b/src/powerpc/fsl/pq3-etsec2-0.dtsi
@@ -0,0 +1,61 @@
+/*
+ * PQ3 eTSEC2 device tree stub [ @ offsets 0x24000/0xb0000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+mdio@24000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,etsec2-mdio";
+	reg = <0x24000 0x1000 0xb0030 0x4>;
+};
+
+ethernet@b0000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "fsl,etsec2";
+	fsl,num_rx_queues = <0x8>;
+	fsl,num_tx_queues = <0x8>;
+	fsl,magic-packet;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+	ranges;
+
+	queue-group@b0000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xb0000 0x1000>;
+		interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
+	};
+};
diff --git a/src/powerpc/fsl/pq3-etsec2-1.dtsi b/src/powerpc/fsl/pq3-etsec2-1.dtsi
new file mode 100644
index 000000000000..9f25427c1527
--- /dev/null
+++ b/src/powerpc/fsl/pq3-etsec2-1.dtsi
@@ -0,0 +1,61 @@
+/*
+ * PQ3 eTSEC2 device tree stub [ @ offsets 0x25000/0xb1000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+mdio@25000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,etsec2-tbi";
+	reg = <0x25000 0x1000 0xb1030 0x4>;
+};
+
+ethernet@b1000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "fsl,etsec2";
+	fsl,num_rx_queues = <0x8>;
+	fsl,num_tx_queues = <0x8>;
+	fsl,magic-packet;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+	ranges;
+
+	queue-group@b1000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xb1000 0x1000>;
+		interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
+	};
+};
diff --git a/src/powerpc/fsl/pq3-etsec2-2.dtsi b/src/powerpc/fsl/pq3-etsec2-2.dtsi
new file mode 100644
index 000000000000..cd7c318ab131
--- /dev/null
+++ b/src/powerpc/fsl/pq3-etsec2-2.dtsi
@@ -0,0 +1,60 @@
+/*
+ * PQ3 eTSEC2 device tree stub [ @ offsets 0x26000/0xb2000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mdio@26000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,etsec2-tbi";
+	reg = <0x26000 0x1000 0xb1030 0x4>;
+};
+
+ethernet@b2000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "fsl,etsec2";
+	fsl,num_rx_queues = <0x8>;
+	fsl,num_tx_queues = <0x8>;
+	fsl,magic-packet;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+	ranges;
+
+	queue-group@b2000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xb2000 0x1000>;
+		interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
+	};
+};
diff --git a/src/powerpc/fsl/pq3-etsec2-grp2-0.dtsi b/src/powerpc/fsl/pq3-etsec2-grp2-0.dtsi
new file mode 100644
index 000000000000..034ab8fac22f
--- /dev/null
+++ b/src/powerpc/fsl/pq3-etsec2-grp2-0.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb4000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&enet0_grp2 {
+	queue-group@b4000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xb4000 0x1000>;
+		interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
+	};
+};
diff --git a/src/powerpc/fsl/pq3-etsec2-grp2-1.dtsi b/src/powerpc/fsl/pq3-etsec2-grp2-1.dtsi
new file mode 100644
index 000000000000..3be9ba3b374e
--- /dev/null
+++ b/src/powerpc/fsl/pq3-etsec2-grp2-1.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb5000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&enet1_grp2 {
+	queue-group@b5000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xb5000 0x1000>;
+		interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
+	};
+};
diff --git a/src/powerpc/fsl/pq3-etsec2-grp2-2.dtsi b/src/powerpc/fsl/pq3-etsec2-grp2-2.dtsi
new file mode 100644
index 000000000000..02a33457048c
--- /dev/null
+++ b/src/powerpc/fsl/pq3-etsec2-grp2-2.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb6000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&enet2_grp2 {
+	queue-group@b6000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xb6000 0x1000>;
+		interrupts = <25 2 0 0 26 2 0 0 27 2 0 0>;
+	};
+};
diff --git a/src/powerpc/fsl/pq3-gpio-0.dtsi b/src/powerpc/fsl/pq3-gpio-0.dtsi
new file mode 100644
index 000000000000..a1b48546b02d
--- /dev/null
+++ b/src/powerpc/fsl/pq3-gpio-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 GPIO device tree stub [ controller @ offset 0xfc00 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+gpio-controller@fc00 {
+	#gpio-cells = <2>;
+	compatible = "fsl,pq3-gpio";
+	reg = <0xfc00 0x100>;
+	interrupts = <47 0x2 0 0>;
+	gpio-controller;
+};
diff --git a/src/powerpc/fsl/pq3-i2c-0.dtsi b/src/powerpc/fsl/pq3-i2c-0.dtsi
new file mode 100644
index 000000000000..d1dd6fb82a78
--- /dev/null
+++ b/src/powerpc/fsl/pq3-i2c-0.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 I2C device tree stub [ controller @ offset 0x3000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@3000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cell-index = <0>;
+	compatible = "fsl-i2c";
+	reg = <0x3000 0x100>;
+	interrupts = <43 2 0 0>;
+	dfsrr;
+};
diff --git a/src/powerpc/fsl/pq3-i2c-1.dtsi b/src/powerpc/fsl/pq3-i2c-1.dtsi
new file mode 100644
index 000000000000..a9bd803e2090
--- /dev/null
+++ b/src/powerpc/fsl/pq3-i2c-1.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 I2C device tree stub [ controller @ offset 0x3100 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@3100 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cell-index = <1>;
+	compatible = "fsl-i2c";
+	reg = <0x3100 0x100>;
+	interrupts = <43 2 0 0>;
+	dfsrr;
+};
diff --git a/src/powerpc/fsl/pq3-mpic-message-B.dtsi b/src/powerpc/fsl/pq3-mpic-message-B.dtsi
new file mode 100644
index 000000000000..1cf0b77b1efe
--- /dev/null
+++ b/src/powerpc/fsl/pq3-mpic-message-B.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 MPIC Message (Group B) device tree stub [ controller @ offset 0x42400 ]
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+message@42400 {
+	compatible = "fsl,mpic-v3.1-msgr";
+	reg = <0x42400 0x200>;
+	interrupts = <
+		0xb4 2 0 0
+		0xb5 2 0 0
+		0xb6 2 0 0
+		0xb7 2 0 0>;
+};
diff --git a/src/powerpc/fsl/pq3-mpic-timer-B.dtsi b/src/powerpc/fsl/pq3-mpic-timer-B.dtsi
new file mode 100644
index 000000000000..8734cffae1a1
--- /dev/null
+++ b/src/powerpc/fsl/pq3-mpic-timer-B.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 MPIC Timer (Group B) device tree stub [ controller @ offset 0x42100 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+timer@42100 {
+	compatible = "fsl,mpic-global-timer";
+	reg = <0x42100 0x100 0x42300 4>;
+	interrupts = <4 0 3 0
+		      5 0 3 0
+		      6 0 3 0
+		      7 0 3 0>;
+};
diff --git a/src/powerpc/fsl/pq3-mpic.dtsi b/src/powerpc/fsl/pq3-mpic.dtsi
new file mode 100644
index 000000000000..71c30eb10056
--- /dev/null
+++ b/src/powerpc/fsl/pq3-mpic.dtsi
@@ -0,0 +1,79 @@
+/*
+ * PQ3 MPIC device tree stub [ controller @ offset 0x40000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mpic: pic@40000 {
+	interrupt-controller;
+	#address-cells = <0>;
+	#interrupt-cells = <4>;
+	reg = <0x40000 0x40000>;
+	compatible = "fsl,mpic";
+	device_type = "open-pic";
+	big-endian;
+	single-cpu-affinity;
+	last-interrupt-source = <255>;
+};
+
+timer@41100 {
+	compatible = "fsl,mpic-global-timer";
+	reg = <0x41100 0x100 0x41300 4>;
+	interrupts = <0 0 3 0
+		      1 0 3 0
+		      2 0 3 0
+		      3 0 3 0>;
+};
+
+message@41400 {
+	compatible = "fsl,mpic-v3.1-msgr";
+	reg = <0x41400 0x200>;
+	interrupts = <
+		0xb0 2 0 0
+		0xb1 2 0 0
+		0xb2 2 0 0
+		0xb3 2 0 0>;
+};
+
+msi@41600 {
+	compatible = "fsl,mpic-msi";
+	reg = <0x41600 0x80>;
+	msi-available-ranges = <0 0x100>;
+	interrupts = <
+		0xe0 0 0 0
+		0xe1 0 0 0
+		0xe2 0 0 0
+		0xe3 0 0 0
+		0xe4 0 0 0
+		0xe5 0 0 0
+		0xe6 0 0 0
+		0xe7 0 0 0>;
+};
diff --git a/src/powerpc/fsl/pq3-rmu-0.dtsi b/src/powerpc/fsl/pq3-rmu-0.dtsi
new file mode 100644
index 000000000000..587ca9ffad7d
--- /dev/null
+++ b/src/powerpc/fsl/pq3-rmu-0.dtsi
@@ -0,0 +1,68 @@
+/*
+ * PQ3 RIO Message Unit device tree stub [ controller @ offset 0xd3000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+rmu: rmu@d3000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,srio-rmu";
+	reg = <0xd3000 0x500>;
+	ranges = <0x0 0xd3000 0x500>;
+
+	message-unit@0 {
+		compatible = "fsl,srio-msg-unit";
+		reg = <0x0 0x100>;
+		interrupts = <
+			53 2 0 0 /* msg1_tx_irq */
+			54 2 0 0>;/* msg1_rx_irq */
+	};
+	message-unit@100 {
+		compatible = "fsl,srio-msg-unit";
+		reg = <0x100 0x100>;
+		interrupts = <
+			55 2 0 0  /* msg2_tx_irq */
+			56 2 0 0>;/* msg2_rx_irq */
+	};
+	doorbell-unit@400 {
+		compatible = "fsl,srio-dbell-unit";
+		reg = <0x400 0x80>;
+		interrupts = <
+			49 2 0 0  /* bell_outb_irq */
+			50 2 0 0>;/* bell_inb_irq */
+	};
+	port-write-unit@4e0 {
+		compatible = "fsl,srio-port-write-unit";
+		reg = <0x4e0 0x20>;
+		interrupts = <48 2 0 0>;
+	};
+};
diff --git a/src/powerpc/fsl/pq3-sata2-0.dtsi b/src/powerpc/fsl/pq3-sata2-0.dtsi
new file mode 100644
index 000000000000..3c28dd08d38b
--- /dev/null
+++ b/src/powerpc/fsl/pq3-sata2-0.dtsi
@@ -0,0 +1,40 @@
+/*
+ * PQ3 SATAv2 device tree stub [ controller @ offset 0x18000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@18000 {
+	compatible = "fsl,pq-sata-v2";
+	reg = <0x18000 0x1000>;
+	cell-index = <1>;
+	interrupts = <74 0x2 0 0>;
+};
diff --git a/src/powerpc/fsl/pq3-sata2-1.dtsi b/src/powerpc/fsl/pq3-sata2-1.dtsi
new file mode 100644
index 000000000000..eefaf2855e3b
--- /dev/null
+++ b/src/powerpc/fsl/pq3-sata2-1.dtsi
@@ -0,0 +1,40 @@
+/*
+ * PQ3 SATAv2 device tree stub [ controller @ offset 0x19000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@19000 {
+	compatible = "fsl,pq-sata-v2";
+	reg = <0x19000 0x1000>;
+	cell-index = <2>;
+	interrupts = <41 0x2 0 0>;
+};
diff --git a/src/powerpc/fsl/pq3-sec2.1-0.dtsi b/src/powerpc/fsl/pq3-sec2.1-0.dtsi
new file mode 100644
index 000000000000..02a5c7ae72d0
--- /dev/null
+++ b/src/powerpc/fsl/pq3-sec2.1-0.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 Sec/Crypto 2.1 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+	compatible = "fsl,sec2.1", "fsl,sec2.0";
+	reg = <0x30000 0x10000>;
+	interrupts = <45 2 0 0>;
+	fsl,num-channels = <4>;
+	fsl,channel-fifo-len = <24>;
+	fsl,exec-units-mask = <0xfe>;
+	fsl,descriptor-types-mask = <0x12b0ebf>;
+};
diff --git a/src/powerpc/fsl/pq3-sec3.0-0.dtsi b/src/powerpc/fsl/pq3-sec3.0-0.dtsi
new file mode 100644
index 000000000000..bba1ba44ccf0
--- /dev/null
+++ b/src/powerpc/fsl/pq3-sec3.0-0.dtsi
@@ -0,0 +1,45 @@
+/*
+ * PQ3 Sec/Crypto 3.0 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+	compatible = "fsl,sec3.0",
+		     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+		     "fsl,sec2.0";
+	reg = <0x30000 0x10000>;
+	interrupts = <45 2 0 0 58 2 0 0>;
+	fsl,num-channels = <4>;
+	fsl,channel-fifo-len = <24>;
+	fsl,exec-units-mask = <0x9fe>;
+	fsl,descriptor-types-mask = <0x3ab0ebf>;
+};
diff --git a/src/powerpc/fsl/pq3-sec3.1-0.dtsi b/src/powerpc/fsl/pq3-sec3.1-0.dtsi
new file mode 100644
index 000000000000..8f0a5669bee5
--- /dev/null
+++ b/src/powerpc/fsl/pq3-sec3.1-0.dtsi
@@ -0,0 +1,45 @@
+/*
+ * PQ3 Sec/Crypto 3.1 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+	compatible = "fsl,sec3.1", "fsl,sec3.0",
+		     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+		     "fsl,sec2.0";
+	reg = <0x30000 0x10000>;
+	interrupts = <45 2 0 0 58 2 0 0>;
+	fsl,num-channels = <4>;
+	fsl,channel-fifo-len = <24>;
+	fsl,exec-units-mask = <0xbfe>;
+	fsl,descriptor-types-mask = <0x3ab0ebf>;
+};
diff --git a/src/powerpc/fsl/pq3-sec3.3-0.dtsi b/src/powerpc/fsl/pq3-sec3.3-0.dtsi
new file mode 100644
index 000000000000..c227f2748a24
--- /dev/null
+++ b/src/powerpc/fsl/pq3-sec3.3-0.dtsi
@@ -0,0 +1,45 @@
+/*
+ * PQ3 Sec/Crypto 3.3 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+	compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
+		     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+		     "fsl,sec2.0";
+	reg = <0x30000 0x10000>;
+	interrupts = <45 2 0 0 58 2 0 0>;
+	fsl,num-channels = <4>;
+	fsl,channel-fifo-len = <24>;
+	fsl,exec-units-mask = <0x97c>;
+	fsl,descriptor-types-mask = <0x3a30abf>;
+};
diff --git a/src/powerpc/fsl/pq3-sec4.4-0.dtsi b/src/powerpc/fsl/pq3-sec4.4-0.dtsi
new file mode 100644
index 000000000000..bb3d8266b5ce
--- /dev/null
+++ b/src/powerpc/fsl/pq3-sec4.4-0.dtsi
@@ -0,0 +1,67 @@
+/*
+ * PQ3 Sec/Crypto 4.4 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+	compatible = "fsl,sec-v4.4", "fsl,sec-v4.0";
+	fsl,sec-era = <3>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges		 = <0x0 0x30000 0x10000>;
+	reg		 = <0x30000 0x10000>;
+	interrupts	 = <58 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
+		reg	   = <0x1000 0x1000>;
+		interrupts	 = <45 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
+		reg	   = <0x2000 0x1000>;
+		interrupts	 = <45 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
+		reg	   = <0x3000 0x1000>;
+		interrupts	 = <45 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
+		reg	   = <0x4000 0x1000>;
+		interrupts	 = <45 2 0 0>;
+	};
+};
diff --git a/src/powerpc/fsl/pq3-usb2-dr-0.dtsi b/src/powerpc/fsl/pq3-usb2-dr-0.dtsi
new file mode 100644
index 000000000000..185ab9dc3ecd
--- /dev/null
+++ b/src/powerpc/fsl/pq3-usb2-dr-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 USB DR device tree stub [ controller @ offset 0x22000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@22000 {
+	compatible = "fsl-usb2-dr";
+	reg = <0x22000 0x1000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	interrupts = <28 0x2 0 0>;
+};
diff --git a/src/powerpc/fsl/pq3-usb2-dr-1.dtsi b/src/powerpc/fsl/pq3-usb2-dr-1.dtsi
new file mode 100644
index 000000000000..fe24cd612fff
--- /dev/null
+++ b/src/powerpc/fsl/pq3-usb2-dr-1.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 USB DR device tree stub [ controller @ offset 0x23000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@23000 {
+	compatible = "fsl-usb2-dr";
+	reg = <0x23000 0x1000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	interrupts = <46 0x2 0 0>;
+};
diff --git a/src/powerpc/fsl/qonverge-usb2-dr-0.dtsi b/src/powerpc/fsl/qonverge-usb2-dr-0.dtsi
new file mode 100644
index 000000000000..fcc7e5b7fd47
--- /dev/null
+++ b/src/powerpc/fsl/qonverge-usb2-dr-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ Qonverge USB Host device tree stub [ controller @ offset 0x210000 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb0: usb@210000 {
+	compatible = "fsl-usb2-dr";
+	reg = <0x210000 0x1000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	interrupts = <44 0x2 0 0>;
+};
diff --git a/src/powerpc/fsl/qoriq-bman1-portals.dtsi b/src/powerpc/fsl/qoriq-bman1-portals.dtsi
new file mode 100644
index 000000000000..5022432ebaa9
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-bman1-portals.dtsi
@@ -0,0 +1,90 @@
+/*
+ * QorIQ BMan Portal device tree stub for 10 portals
+ *
+ * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&bportals {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+
+	bman-portal@0 {
+		compatible = "fsl,bman-portal";
+		reg = <0x0 0x4000>, <0x100000 0x1000>;
+		interrupts = <105 2 0 0>;
+	};
+	bman-portal@4000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x4000 0x4000>, <0x101000 0x1000>;
+		interrupts = <107 2 0 0>;
+	};
+	bman-portal@8000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x8000 0x4000>, <0x102000 0x1000>;
+		interrupts = <109 2 0 0>;
+	};
+	bman-portal@c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xc000 0x4000>, <0x103000 0x1000>;
+		interrupts = <111 2 0 0>;
+	};
+	bman-portal@10000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x10000 0x4000>, <0x104000 0x1000>;
+		interrupts = <113 2 0 0>;
+	};
+	bman-portal@14000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x14000 0x4000>, <0x105000 0x1000>;
+		interrupts = <115 2 0 0>;
+	};
+	bman-portal@18000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x18000 0x4000>, <0x106000 0x1000>;
+		interrupts = <117 2 0 0>;
+	};
+	bman-portal@1c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x1c000 0x4000>, <0x107000 0x1000>;
+		interrupts = <119 2 0 0>;
+	};
+	bman-portal@20000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x20000 0x4000>, <0x108000 0x1000>;
+		interrupts = <121 2 0 0>;
+	};
+	bman-portal@24000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x24000 0x4000>, <0x109000 0x1000>;
+		interrupts = <123 2 0 0>;
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-bman1.dtsi b/src/powerpc/fsl/qoriq-bman1.dtsi
new file mode 100644
index 000000000000..3b5e3504acb7
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-bman1.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ BMan device tree stub [ controller @ offset 0x31a000 ]
+ *
+ * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+bman: bman@31a000 {
+	compatible = "fsl,bman";
+	reg = <0x31a000 0x1000>;
+	interrupts = <16 2 1 2>;
+	fsl,bman-portals = <&bportals>;
+	memory-region = <&bman_fbpr>;
+};
diff --git a/src/powerpc/fsl/qoriq-clockgen1.dtsi b/src/powerpc/fsl/qoriq-clockgen1.dtsi
new file mode 100644
index 000000000000..88cd70de4f86
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-clockgen1.dtsi
@@ -0,0 +1,86 @@
+/*
+ * QorIQ clock control device tree stub [ controller @ offset 0xe1000 ]
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+clockgen: global-utilities@e1000 {
+	compatible = "fsl,qoriq-clockgen-1.0";
+	ranges = <0x0 0xe1000 0x1000>;
+	reg = <0xe1000 0x1000>;
+	clock-frequency = <0>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	#clock-cells = <2>;
+
+	sysclk: sysclk {
+		#clock-cells = <0>;
+		compatible = "fsl,qoriq-sysclk-1.0", "fixed-clock";
+		clock-output-names = "sysclk";
+	};
+	pll0: pll0@800 {
+		#clock-cells = <1>;
+		reg = <0x800 0x4>;
+		compatible = "fsl,qoriq-core-pll-1.0";
+		clocks = <&sysclk>;
+		clock-output-names = "pll0", "pll0-div2";
+	};
+	pll1: pll1@820 {
+		#clock-cells = <1>;
+		reg = <0x820 0x4>;
+		compatible = "fsl,qoriq-core-pll-1.0";
+		clocks = <&sysclk>;
+		clock-output-names = "pll1", "pll1-div2";
+	};
+	mux0: mux0@0 {
+		#clock-cells = <0>;
+		reg = <0x0 0x4>;
+		compatible = "fsl,qoriq-core-mux-1.0";
+		clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+		clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+		clock-output-names = "cmux0";
+	};
+	mux1: mux1@20 {
+		#clock-cells = <0>;
+		reg = <0x20 0x4>;
+		compatible = "fsl,qoriq-core-mux-1.0";
+		clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+		clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+		clock-output-names = "cmux1";
+	};
+	platform_pll: platform-pll@c00 {
+		#clock-cells = <1>;
+		reg = <0xc00 0x4>;
+		compatible = "fsl,qoriq-platform-pll-1.0";
+		clocks = <&sysclk>;
+		clock-output-names = "platform-pll", "platform-pll-div2";
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-clockgen2.dtsi b/src/powerpc/fsl/qoriq-clockgen2.dtsi
new file mode 100644
index 000000000000..6dfd7c5357ab
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-clockgen2.dtsi
@@ -0,0 +1,69 @@
+/*
+ * QorIQ clock control device tree stub [ controller @ offset 0xe1000 ]
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+clockgen: global-utilities@e1000 {
+	compatible = "fsl,qoriq-clockgen-2.0";
+	ranges = <0x0 0xe1000 0x1000>;
+	reg = <0xe1000 0x1000>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	#clock-cells = <2>;
+
+	sysclk: sysclk {
+		#clock-cells = <0>;
+		compatible = "fsl,qoriq-sysclk-2.0", "fixed-clock";
+		clock-output-names = "sysclk";
+	};
+	pll0: pll0@800 {
+		#clock-cells = <1>;
+		reg = <0x800 0x4>;
+		compatible = "fsl,qoriq-core-pll-2.0";
+		clocks = <&sysclk>;
+		clock-output-names = "pll0", "pll0-div2", "pll0-div4";
+	};
+	pll1: pll1@820 {
+		#clock-cells = <1>;
+		reg = <0x820 0x4>;
+		compatible = "fsl,qoriq-core-pll-2.0";
+		clocks = <&sysclk>;
+		clock-output-names = "pll1", "pll1-div2", "pll1-div4";
+	};
+	platform_pll: platform-pll@c00 {
+		#clock-cells = <1>;
+		reg = <0xc00 0x4>;
+		compatible = "fsl,qoriq-platform-pll-2.0";
+		clocks = <&sysclk>;
+		clock-output-names = "platform-pll", "platform-pll-div2";
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-dma-0.dtsi b/src/powerpc/fsl/qoriq-dma-0.dtsi
new file mode 100644
index 000000000000..1aebf3ea4ca5
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-dma-0.dtsi
@@ -0,0 +1,66 @@
+/*
+ * QorIQ DMA device tree stub [ controller @ offset 0x100000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma0: dma@100300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,eloplus-dma";
+	reg = <0x100300 0x4>;
+	ranges = <0x0 0x100100 0x200>;
+	cell-index = <0>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		cell-index = <0>;
+		interrupts = <28 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		cell-index = <1>;
+		interrupts = <29 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		cell-index = <2>;
+		interrupts = <30 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		cell-index = <3>;
+		interrupts = <31 2 0 0>;
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-dma-1.dtsi b/src/powerpc/fsl/qoriq-dma-1.dtsi
new file mode 100644
index 000000000000..ecf5e180fe79
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-dma-1.dtsi
@@ -0,0 +1,66 @@
+/*
+ * QorIQ DMA device tree stub [ controller @ offset 0x101000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma1: dma@101300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,eloplus-dma";
+	reg = <0x101300 0x4>;
+	ranges = <0x0 0x101100 0x200>;
+	cell-index = <1>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		cell-index = <0>;
+		interrupts = <32 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		cell-index = <1>;
+		interrupts = <33 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		cell-index = <2>;
+		interrupts = <34 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		cell-index = <3>;
+		interrupts = <35 2 0 0>;
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-duart-0.dtsi b/src/powerpc/fsl/qoriq-duart-0.dtsi
new file mode 100644
index 000000000000..225c07b4e8ab
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-duart-0.dtsi
@@ -0,0 +1,51 @@
+/*
+ * QorIQ DUART device tree stub [ controller @ offset 0x11c000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+serial0: serial@11c500 {
+	cell-index = <0>;
+	device_type = "serial";
+	compatible = "fsl,ns16550", "ns16550";
+	reg = <0x11c500 0x100>;
+	clock-frequency = <0>;
+	interrupts = <36 2 0 0>;
+};
+
+serial1: serial@11c600 {
+	cell-index = <1>;
+	device_type = "serial";
+	compatible = "fsl,ns16550", "ns16550";
+	reg = <0x11c600 0x100>;
+	clock-frequency = <0>;
+	interrupts = <36 2 0 0>;
+};
diff --git a/src/powerpc/fsl/qoriq-duart-1.dtsi b/src/powerpc/fsl/qoriq-duart-1.dtsi
new file mode 100644
index 000000000000..d23233a56b91
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-duart-1.dtsi
@@ -0,0 +1,51 @@
+/*
+ * QorIQ DUART device tree stub [ controller @ offset 0x11d000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+serial2: serial@11d500 {
+	cell-index = <2>;
+	device_type = "serial";
+	compatible = "fsl,ns16550", "ns16550";
+	reg = <0x11d500 0x100>;
+	clock-frequency = <0>;
+	interrupts = <37 2 0 0>;
+};
+
+serial3: serial@11d600 {
+	cell-index = <3>;
+	device_type = "serial";
+	compatible = "fsl,ns16550", "ns16550";
+	reg = <0x11d600 0x100>;
+	clock-frequency = <0>;
+	interrupts = <37 2 0 0>;
+};
diff --git a/src/powerpc/fsl/qoriq-esdhc-0.dtsi b/src/powerpc/fsl/qoriq-esdhc-0.dtsi
new file mode 100644
index 000000000000..20835ae216c7
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-esdhc-0.dtsi
@@ -0,0 +1,40 @@
+/*
+ * QorIQ eSDHC device tree stub [ controller @ offset 0x114000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sdhc: sdhc@114000 {
+	compatible = "fsl,esdhc";
+	reg = <0x114000 0x1000>;
+	interrupts = <48 2 0 0>;
+	clock-frequency = <0>;
+};
diff --git a/src/powerpc/fsl/qoriq-espi-0.dtsi b/src/powerpc/fsl/qoriq-espi-0.dtsi
new file mode 100644
index 000000000000..6db06975e095
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-espi-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ eSPI device tree stub [ controller @ offset 0x110000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+spi@110000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,mpc8536-espi";
+	reg = <0x110000 0x1000>;
+	interrupts = <53 0x2 0 0>;
+};
diff --git a/src/powerpc/fsl/qoriq-fman-0-10g-0.dtsi b/src/powerpc/fsl/qoriq-fman-0-10g-0.dtsi
new file mode 100644
index 000000000000..eb77675c255a
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman-0-10g-0.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan 10g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x10: port@90000 {
+		cell-index = <0x10>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x90000 0x1000>;
+	};
+
+	fman0_tx_0x30: port@b0000 {
+		cell-index = <0x30>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xb0000 0x1000>;
+	};
+
+	ethernet@f0000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-xgec";
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
+	};
+
+	xmdio0: mdio@f1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+		interrupts = <101 2 0 0>;
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman-0-1g-0.dtsi b/src/powerpc/fsl/qoriq-fman-0-1g-0.dtsi
new file mode 100644
index 000000000000..b965bc219bae
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman-0-1g-0.dtsi
@@ -0,0 +1,69 @@
+/*
+ * QorIQ FMan 1g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x88000 0x1000>;
+	};
+
+	fman0_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xa8000 0x1000>;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+		tbi-handle = <&tbi0>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio0: mdio@e1120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe1120 0xee0>;
+		interrupts = <100 2 0 0>;
+
+		tbi0: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman-0-1g-1.dtsi b/src/powerpc/fsl/qoriq-fman-0-1g-1.dtsi
new file mode 100644
index 000000000000..9eb6e6dd7cf9
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman-0-1g-1.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #1 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x89000 0x1000>;
+	};
+
+	fman0_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xa9000 0x1000>;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+		tbi-handle = <&tbi1>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e3120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe3120 0xee0>;
+
+		tbi1: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman-0-1g-2.dtsi b/src/powerpc/fsl/qoriq-fman-0-1g-2.dtsi
new file mode 100644
index 000000000000..092b89936743
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman-0-1g-2.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #2 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0a: port@8a000 {
+		cell-index = <0xa>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8a000 0x1000>;
+	};
+
+	fman0_tx_0x2a: port@aa000 {
+		cell-index = <0x2a>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xaa000 0x1000>;
+	};
+
+	ethernet@e4000 {
+		cell-index = <2>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe4000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
+		tbi-handle = <&tbi2>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e5120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe5120 0xee0>;
+
+		tbi2: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman-0-1g-3.dtsi b/src/powerpc/fsl/qoriq-fman-0-1g-3.dtsi
new file mode 100644
index 000000000000..2df0dc876045
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman-0-1g-3.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0b: port@8b000 {
+		cell-index = <0xb>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8b000 0x1000>;
+	};
+
+	fman0_tx_0x2b: port@ab000 {
+		cell-index = <0x2b>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xab000 0x1000>;
+	};
+
+	ethernet@e6000 {
+		cell-index = <3>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe6000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
+		tbi-handle = <&tbi3>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e7120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe7120 0xee0>;
+
+		tbi3: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman-0-1g-4.dtsi b/src/powerpc/fsl/qoriq-fman-0-1g-4.dtsi
new file mode 100644
index 000000000000..5fceb2438fdc
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman-0-1g-4.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #4 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0c: port@8c000 {
+		cell-index = <0xc>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8c000 0x1000>;
+	};
+
+	fman0_tx_0x2c: port@ac000 {
+		cell-index = <0x2c>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xac000 0x1000>;
+	};
+
+	ethernet@e8000 {
+		cell-index = <4>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe8000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
+		tbi-handle = <&tbi4>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e9120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe9120 0xee0>;
+
+		tbi4: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman-0.dtsi b/src/powerpc/fsl/qoriq-fman-0.dtsi
new file mode 100644
index 000000000000..abd01d466de4
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman-0.dtsi
@@ -0,0 +1,101 @@
+/*
+ * QorIQ FMan device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman0: fman@400000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <0>;
+	compatible = "fsl,fman";
+	ranges = <0 0x400000 0x100000>;
+	reg = <0x400000 0x100000>;
+	interrupts = <96 2 0 0>, <16 2 1 1>;
+	clocks = <&clockgen 3 0>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x40 0xc>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x28000>;
+	};
+
+	fman0_oh_0x1: port@81000 {
+		cell-index = <0x1>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x81000 0x1000>;
+	};
+
+	fman0_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman0_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman0_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman0_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x85000 0x1000>;
+		status = "disabled";
+	};
+
+	fman0_oh_0x6: port@86000 {
+		cell-index = <0x6>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x86000 0x1000>;
+		status = "disabled";
+	};
+
+	fman0_oh_0x7: port@87000 {
+		cell-index = <0x7>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x87000 0x1000>;
+		status = "disabled";
+	};
+
+	ptp_timer0: ptp-timer@fe000 {
+		compatible = "fsl,fman-ptp-timer";
+		reg = <0xfe000 0x1000>;
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman-1-10g-0.dtsi b/src/powerpc/fsl/qoriq-fman-1-10g-0.dtsi
new file mode 100644
index 000000000000..83ae87b69d92
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman-1-10g-0.dtsi
@@ -0,0 +1,61 @@
+/*
+ * QorIQ FMan 10g port #0 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x10: port@90000 {
+		cell-index = <0x10>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x90000 0x1000>;
+	};
+
+	fman1_tx_0x30: port@b0000 {
+		cell-index = <0x30>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xb0000 0x1000>;
+	};
+
+	ethernet@f0000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-xgec";
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>;
+	};
+
+	mdio@f1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman-1-1g-0.dtsi b/src/powerpc/fsl/qoriq-fman-1-1g-0.dtsi
new file mode 100644
index 000000000000..b0f0e36a4eac
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman-1-1g-0.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #0 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x88000 0x1000>;
+	};
+
+	fman1_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xa8000 0x1000>;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x08 &fman1_tx_0x28>;
+		tbi-handle = <&tbi5>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e1120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe1120 0xee0>;
+
+		tbi5: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman-1-1g-1.dtsi b/src/powerpc/fsl/qoriq-fman-1-1g-1.dtsi
new file mode 100644
index 000000000000..a3a79f8552a3
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman-1-1g-1.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #1 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x89000 0x1000>;
+	};
+
+	fman1_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xa9000 0x1000>;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x09 &fman1_tx_0x29>;
+		tbi-handle = <&tbi6>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e3120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe3120 0xee0>;
+
+		tbi6: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman-1-1g-2.dtsi b/src/powerpc/fsl/qoriq-fman-1-1g-2.dtsi
new file mode 100644
index 000000000000..96a69a84b8a8
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman-1-1g-2.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #2 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0a: port@8a000 {
+		cell-index = <0xa>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8a000 0x1000>;
+	};
+
+	fman1_tx_0x2a: port@aa000 {
+		cell-index = <0x2a>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xaa000 0x1000>;
+	};
+
+	ethernet@e4000 {
+		cell-index = <2>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe4000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0a &fman1_tx_0x2a>;
+		tbi-handle = <&tbi7>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e5120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe5120 0xee0>;
+
+		tbi7: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman-1-1g-3.dtsi b/src/powerpc/fsl/qoriq-fman-1-1g-3.dtsi
new file mode 100644
index 000000000000..7405d1940133
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman-1-1g-3.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #3 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0b: port@8b000 {
+		cell-index = <0xb>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8b000 0x1000>;
+	};
+
+	fman1_tx_0x2b: port@ab000 {
+		cell-index = <0x2b>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xab000 0x1000>;
+	};
+
+	ethernet@e6000 {
+		cell-index = <3>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe6000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0b &fman1_tx_0x2b>;
+		tbi-handle = <&tbi8>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e7120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe7120 0xee0>;
+
+		tbi8: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman-1-1g-4.dtsi b/src/powerpc/fsl/qoriq-fman-1-1g-4.dtsi
new file mode 100644
index 000000000000..f49ad69e5212
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman-1-1g-4.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #4 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0c: port@8c000 {
+		cell-index = <0xc>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8c000 0x1000>;
+	};
+
+	fman1_tx_0x2c: port@ac000 {
+		cell-index = <0x2c>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xac000 0x1000>;
+	};
+
+	ethernet@e8000 {
+		cell-index = <4>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe8000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0c &fman1_tx_0x2c>;
+		tbi-handle = <&tbi9>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e9120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe9120 0xee0>;
+
+		tbi9: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman-1.dtsi b/src/powerpc/fsl/qoriq-fman-1.dtsi
new file mode 100644
index 000000000000..debea75fd3f0
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman-1.dtsi
@@ -0,0 +1,101 @@
+/*
+ * QorIQ FMan device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman1: fman@500000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <1>;
+	compatible = "fsl,fman";
+	ranges = <0 0x500000 0x100000>;
+	reg = <0x500000 0x100000>;
+	interrupts = <97 2 0 0>, <16 2 1 0>;
+	clocks = <&clockgen 3 1>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x60 0xc>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x28000>;
+	};
+
+	fman1_oh_0x1: port@81000 {
+		cell-index = <0x1>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x81000 0x1000>;
+	};
+
+	fman1_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman1_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman1_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman1_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x85000 0x1000>;
+		status = "disabled";
+	};
+
+	fman1_oh_0x6: port@86000 {
+		cell-index = <0x6>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x86000 0x1000>;
+		status = "disabled";
+	};
+
+	fman1_oh_0x7: port@87000 {
+		cell-index = <0x7>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x87000 0x1000>;
+		status = "disabled";
+	};
+
+	ptp_timer1: ptp-timer@fe000 {
+		compatible = "fsl,fman-ptp-timer";
+		reg = <0xfe000 0x1000>;
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi b/src/powerpc/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
new file mode 100644
index 000000000000..e1a961f05dcd
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
@@ -0,0 +1,71 @@
+/*
+ * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x88000 0x1000>;
+		fsl,fman-10g-port;
+		fsl,fman-best-effort-port;
+	};
+
+	fman0_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa8000 0x1000>;
+		fsl,fman-10g-port;
+		fsl,fman-best-effort-port;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy0>;
+	};
+
+	mdio@e1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe1000 0x1000>;
+
+		pcsphy0: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman3-0-10g-0.dtsi b/src/powerpc/fsl/qoriq-fman3-0-10g-0.dtsi
new file mode 100644
index 000000000000..c288f3c6c637
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman3-0-10g-0.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan v3 10g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x10: port@90000 {
+		cell-index = <0x10>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x90000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman0_tx_0x30: port@b0000 {
+		cell-index = <0x30>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb0000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f0000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
+		pcsphy-handle = <&pcsphy6>;
+	};
+
+	mdio@f1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+
+		pcsphy6: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi b/src/powerpc/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
new file mode 100644
index 000000000000..94f3e7175012
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
@@ -0,0 +1,71 @@
+/*
+ * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x89000 0x1000>;
+		fsl,fman-10g-port;
+		fsl,fman-best-effort-port;
+	};
+
+	fman0_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa9000 0x1000>;
+		fsl,fman-10g-port;
+		fsl,fman-best-effort-port;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy1>;
+	};
+
+	mdio@e3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe3000 0x1000>;
+
+		pcsphy1: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman3-0-10g-1.dtsi b/src/powerpc/fsl/qoriq-fman3-0-10g-1.dtsi
new file mode 100644
index 000000000000..94a76982d214
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman3-0-10g-1.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x11: port@91000 {
+		cell-index = <0x11>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x91000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman0_tx_0x31: port@b1000 {
+		cell-index = <0x31>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb1000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f2000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>;
+		pcsphy-handle = <&pcsphy7>;
+	};
+
+	mdio@f3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf3000 0x1000>;
+
+		pcsphy7: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman3-0-1g-0.dtsi b/src/powerpc/fsl/qoriq-fman3-0-1g-0.dtsi
new file mode 100644
index 000000000000..b5ff5f71c6b8
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman3-0-1g-0.dtsi
@@ -0,0 +1,67 @@
+/*
+ * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x88000 0x1000>;
+	};
+
+	fman0_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa8000 0x1000>;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy0>;
+	};
+
+	mdio@e1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe1000 0x1000>;
+
+		pcsphy0: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman3-0-1g-1.dtsi b/src/powerpc/fsl/qoriq-fman3-0-1g-1.dtsi
new file mode 100644
index 000000000000..ee44182c6348
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman3-0-1g-1.dtsi
@@ -0,0 +1,67 @@
+/*
+ * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x89000 0x1000>;
+	};
+
+	fman0_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa9000 0x1000>;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy1>;
+	};
+
+	mdio@e3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe3000 0x1000>;
+
+		pcsphy1: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman3-0-1g-2.dtsi b/src/powerpc/fsl/qoriq-fman3-0-1g-2.dtsi
new file mode 100644
index 000000000000..f05f0d775039
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman3-0-1g-2.dtsi
@@ -0,0 +1,67 @@
+/*
+ * QorIQ FMan v3 1g port #2 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0a: port@8a000 {
+		cell-index = <0xa>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8a000 0x1000>;
+	};
+
+	fman0_tx_0x2a: port@aa000 {
+		cell-index = <0x2a>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xaa000 0x1000>;
+	};
+
+	ethernet@e4000 {
+		cell-index = <2>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe4000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy2>;
+	};
+
+	mdio@e5000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe5000 0x1000>;
+
+		pcsphy2: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman3-0-1g-3.dtsi b/src/powerpc/fsl/qoriq-fman3-0-1g-3.dtsi
new file mode 100644
index 000000000000..a9114ec51075
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman3-0-1g-3.dtsi
@@ -0,0 +1,67 @@
+/*
+ * QorIQ FMan v3 1g port #3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0b: port@8b000 {
+		cell-index = <0xb>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8b000 0x1000>;
+	};
+
+	fman0_tx_0x2b: port@ab000 {
+		cell-index = <0x2b>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xab000 0x1000>;
+	};
+
+	ethernet@e6000 {
+		cell-index = <3>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe6000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy3>;
+	};
+
+	mdio@e7000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe7000 0x1000>;
+
+		pcsphy3: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman3-0-1g-4.dtsi b/src/powerpc/fsl/qoriq-fman3-0-1g-4.dtsi
new file mode 100644
index 000000000000..44dd00ac7367
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman3-0-1g-4.dtsi
@@ -0,0 +1,67 @@
+/*
+ * QorIQ FMan v3 1g port #4 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0c: port@8c000 {
+		cell-index = <0xc>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8c000 0x1000>;
+	};
+
+	fman0_tx_0x2c: port@ac000 {
+		cell-index = <0x2c>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xac000 0x1000>;
+	};
+
+	ethernet@e8000 {
+		cell-index = <4>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe8000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy4>;
+	};
+
+	mdio@e9000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe9000 0x1000>;
+
+		pcsphy4: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman3-0-1g-5.dtsi b/src/powerpc/fsl/qoriq-fman3-0-1g-5.dtsi
new file mode 100644
index 000000000000..5b1b84b58602
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman3-0-1g-5.dtsi
@@ -0,0 +1,67 @@
+/*
+ * QorIQ FMan v3 1g port #5 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0d: port@8d000 {
+		cell-index = <0xd>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8d000 0x1000>;
+	};
+
+	fman0_tx_0x2d: port@ad000 {
+		cell-index = <0x2d>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xad000 0x1000>;
+	};
+
+	ethernet@ea000 {
+		cell-index = <5>;
+		compatible = "fsl,fman-memac";
+		reg = <0xea000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy5>;
+	};
+
+	mdio@eb000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xeb000 0x1000>;
+
+		pcsphy5: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman3-0.dtsi b/src/powerpc/fsl/qoriq-fman3-0.dtsi
new file mode 100644
index 000000000000..3a20e0d1a6d2
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman3-0.dtsi
@@ -0,0 +1,106 @@
+/*
+ * QorIQ FMan v3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman0: fman@400000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <0>;
+	compatible = "fsl,fman";
+	ranges = <0 0x400000 0x100000>;
+	reg = <0x400000 0x100000>;
+	interrupts = <96 2 0 0>, <16 2 1 1>;
+	clocks = <&clockgen 3 0>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x800 0x10>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x60000>;
+	};
+
+	fman0_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman0_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman0_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman0_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x85000 0x1000>;
+	};
+
+	fman0_oh_0x6: port@86000 {
+		cell-index = <0x6>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x86000 0x1000>;
+	};
+
+	fman0_oh_0x7: port@87000 {
+		cell-index = <0x7>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x87000 0x1000>;
+	};
+
+	mdio0: mdio@fc000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfc000 0x1000>;
+	};
+
+	xmdio0: mdio@fd000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfd000 0x1000>;
+	};
+
+	ptp_timer0: ptp-timer@fe000 {
+		compatible = "fsl,fman-ptp-timer";
+		reg = <0xfe000 0x1000>;
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman3-1-10g-0.dtsi b/src/powerpc/fsl/qoriq-fman3-1-10g-0.dtsi
new file mode 100644
index 000000000000..0e1daaef9e74
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman3-1-10g-0.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan v3 10g port #0 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x10: port@90000 {
+		cell-index = <0x10>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x90000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman1_tx_0x30: port@b0000 {
+		cell-index = <0x30>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb0000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f0000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>;
+		pcsphy-handle = <&pcsphy14>;
+	};
+
+	mdio@f1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+
+		pcsphy14: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman3-1-10g-1.dtsi b/src/powerpc/fsl/qoriq-fman3-1-10g-1.dtsi
new file mode 100644
index 000000000000..68c5ef779266
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman3-1-10g-1.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x11: port@91000 {
+		cell-index = <0x11>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x91000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman1_tx_0x31: port@b1000 {
+		cell-index = <0x31>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb1000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f2000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf2000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x11 &fman1_tx_0x31>;
+		pcsphy-handle = <&pcsphy15>;
+	};
+
+	mdio@f3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf3000 0x1000>;
+
+		pcsphy15: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman3-1-1g-0.dtsi b/src/powerpc/fsl/qoriq-fman3-1-1g-0.dtsi
new file mode 100644
index 000000000000..605363cc1117
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman3-1-1g-0.dtsi
@@ -0,0 +1,67 @@
+/*
+ * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x88000 0x1000>;
+	};
+
+	fman1_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa8000 0x1000>;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x08 &fman1_tx_0x28>;
+		ptp-timer = <&ptp_timer1>;
+		pcsphy-handle = <&pcsphy8>;
+	};
+
+	mdio@e1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe1000 0x1000>;
+
+		pcsphy8: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman3-1-1g-1.dtsi b/src/powerpc/fsl/qoriq-fman3-1-1g-1.dtsi
new file mode 100644
index 000000000000..1955dfa13634
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman3-1-1g-1.dtsi
@@ -0,0 +1,67 @@
+/*
+ * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x89000 0x1000>;
+	};
+
+	fman1_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa9000 0x1000>;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x09 &fman1_tx_0x29>;
+		ptp-timer = <&ptp_timer1>;
+		pcsphy-handle = <&pcsphy9>;
+	};
+
+	mdio@e3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe3000 0x1000>;
+
+		pcsphy9: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman3-1-1g-2.dtsi b/src/powerpc/fsl/qoriq-fman3-1-1g-2.dtsi
new file mode 100644
index 000000000000..2c1476454ee0
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman3-1-1g-2.dtsi
@@ -0,0 +1,67 @@
+/*
+ * QorIQ FMan v3 1g port #2 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0a: port@8a000 {
+		cell-index = <0xa>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8a000 0x1000>;
+	};
+
+	fman1_tx_0x2a: port@aa000 {
+		cell-index = <0x2a>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xaa000 0x1000>;
+	};
+
+	ethernet@e4000 {
+		cell-index = <2>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe4000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0a &fman1_tx_0x2a>;
+		ptp-timer = <&ptp_timer1>;
+		pcsphy-handle = <&pcsphy10>;
+	};
+
+	mdio@e5000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe5000 0x1000>;
+
+		pcsphy10: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman3-1-1g-3.dtsi b/src/powerpc/fsl/qoriq-fman3-1-1g-3.dtsi
new file mode 100644
index 000000000000..b8b541ff5fb0
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman3-1-1g-3.dtsi
@@ -0,0 +1,67 @@
+/*
+ * QorIQ FMan v3 1g port #3 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0b: port@8b000 {
+		cell-index = <0xb>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8b000 0x1000>;
+	};
+
+	fman1_tx_0x2b: port@ab000 {
+		cell-index = <0x2b>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xab000 0x1000>;
+	};
+
+	ethernet@e6000 {
+		cell-index = <3>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe6000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0b &fman1_tx_0x2b>;
+		ptp-timer = <&ptp_timer1>;
+		pcsphy-handle = <&pcsphy11>;
+	};
+
+	mdio@e7000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe7000 0x1000>;
+
+		pcsphy11: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman3-1-1g-4.dtsi b/src/powerpc/fsl/qoriq-fman3-1-1g-4.dtsi
new file mode 100644
index 000000000000..4b2cfddd1b15
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman3-1-1g-4.dtsi
@@ -0,0 +1,67 @@
+/*
+ * QorIQ FMan v3 1g port #4 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0c: port@8c000 {
+		cell-index = <0xc>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8c000 0x1000>;
+	};
+
+	fman1_tx_0x2c: port@ac000 {
+		cell-index = <0x2c>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xac000 0x1000>;
+	};
+
+	ethernet@e8000 {
+		cell-index = <4>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe8000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0c &fman1_tx_0x2c>;
+		ptp-timer = <&ptp_timer1>;
+		pcsphy-handle = <&pcsphy12>;
+	};
+
+	mdio@e9000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe9000 0x1000>;
+
+		pcsphy12: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman3-1-1g-5.dtsi b/src/powerpc/fsl/qoriq-fman3-1-1g-5.dtsi
new file mode 100644
index 000000000000..0a52ddf7cc17
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman3-1-1g-5.dtsi
@@ -0,0 +1,67 @@
+/*
+ * QorIQ FMan v3 1g port #5 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0d: port@8d000 {
+		cell-index = <0xd>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8d000 0x1000>;
+	};
+
+	fman1_tx_0x2d: port@ad000 {
+		cell-index = <0x2d>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xad000 0x1000>;
+	};
+
+	ethernet@ea000 {
+		cell-index = <5>;
+		compatible = "fsl,fman-memac";
+		reg = <0xea000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0d &fman1_tx_0x2d>;
+		ptp-timer = <&ptp_timer1>;
+		pcsphy-handle = <&pcsphy13>;
+	};
+
+	mdio@eb000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xeb000 0x1000>;
+
+		pcsphy13: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman3-1.dtsi b/src/powerpc/fsl/qoriq-fman3-1.dtsi
new file mode 100644
index 000000000000..82750ac944c7
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman3-1.dtsi
@@ -0,0 +1,106 @@
+/*
+ * QorIQ FMan v3 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman1: fman@500000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <1>;
+	compatible = "fsl,fman";
+	ranges = <0 0x500000 0x100000>;
+	reg = <0x500000 0x100000>;
+	interrupts = <97 2 0 0>, <16 2 1 0>;
+	clocks = <&clockgen 3 1>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x820 0x10>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x60000>;
+	};
+
+	fman1_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman1_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman1_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman1_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x85000 0x1000>;
+	};
+
+	fman1_oh_0x6: port@86000 {
+		cell-index = <0x6>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x86000 0x1000>;
+	};
+
+	fman1_oh_0x7: port@87000 {
+		cell-index = <0x7>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x87000 0x1000>;
+	};
+
+	mdio1: mdio@fc000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfc000 0x1000>;
+	};
+
+	mdio@fd000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfd000 0x1000>;
+	};
+
+	ptp_timer1: ptp-timer@fe000 {
+		compatible = "fsl,fman-ptp-timer";
+		reg = <0xfe000 0x1000>;
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-fman3l-0.dtsi b/src/powerpc/fsl/qoriq-fman3l-0.dtsi
new file mode 100644
index 000000000000..7f60b6060176
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-fman3l-0.dtsi
@@ -0,0 +1,94 @@
+/*
+ * QorIQ FMan v3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman0: fman@400000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <0>;
+	compatible = "fsl,fman";
+	ranges = <0 0x400000 0x100000>;
+	reg = <0x400000 0x100000>;
+	interrupts = <96 2 0 0>, <16 2 1 1>;
+	clocks = <&clockgen 3 0>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x800 0x10>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x30000>;
+	};
+
+	fman0_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman0_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman0_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman0_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x85000 0x1000>;
+	};
+
+	mdio0: mdio@fc000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfc000 0x1000>;
+	};
+
+	xmdio0: mdio@fd000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfd000 0x1000>;
+	};
+
+	ptp_timer0: ptp-timer@fe000 {
+		compatible = "fsl,fman-ptp-timer";
+		reg = <0xfe000 0x1000>;
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-gpio-0.dtsi b/src/powerpc/fsl/qoriq-gpio-0.dtsi
new file mode 100644
index 000000000000..cf714f5f68bc
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-gpio-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ GPIO device tree stub [ controller @ offset 0x130000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+gpio0: gpio@130000 {
+	compatible = "fsl,qoriq-gpio";
+	reg = <0x130000 0x1000>;
+	interrupts = <55 2 0 0>;
+	#gpio-cells = <2>;
+	gpio-controller;
+};
diff --git a/src/powerpc/fsl/qoriq-gpio-1.dtsi b/src/powerpc/fsl/qoriq-gpio-1.dtsi
new file mode 100644
index 000000000000..c2f9cdadb604
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-gpio-1.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ GPIO device tree stub [ controller @ offset 0x131000 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+gpio1: gpio@131000 {
+	compatible = "fsl,qoriq-gpio";
+	reg = <0x131000 0x1000>;
+	interrupts = <54 2 0 0>;
+	#gpio-cells = <2>;
+	gpio-controller;
+};
diff --git a/src/powerpc/fsl/qoriq-gpio-2.dtsi b/src/powerpc/fsl/qoriq-gpio-2.dtsi
new file mode 100644
index 000000000000..33f3ccbac83f
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-gpio-2.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ GPIO device tree stub [ controller @ offset 0x132000 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+gpio2: gpio@132000 {
+	compatible = "fsl,qoriq-gpio";
+	reg = <0x132000 0x1000>;
+	interrupts = <86 2 0 0>;
+	#gpio-cells = <2>;
+	gpio-controller;
+};
diff --git a/src/powerpc/fsl/qoriq-gpio-3.dtsi b/src/powerpc/fsl/qoriq-gpio-3.dtsi
new file mode 100644
index 000000000000..86954e95ea02
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-gpio-3.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ GPIO device tree stub [ controller @ offset 0x133000 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+gpio3: gpio@133000 {
+	compatible = "fsl,qoriq-gpio";
+	reg = <0x133000 0x1000>;
+	interrupts = <87 2 0 0>;
+	#gpio-cells = <2>;
+	gpio-controller;
+};
diff --git a/src/powerpc/fsl/qoriq-i2c-0.dtsi b/src/powerpc/fsl/qoriq-i2c-0.dtsi
new file mode 100644
index 000000000000..5f9bf7debe4c
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-i2c-0.dtsi
@@ -0,0 +1,53 @@
+/*
+ * QorIQ I2C device tree stub [ controller @ offset 0x118000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@118000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cell-index = <0>;
+	compatible = "fsl-i2c";
+	reg = <0x118000 0x100>;
+	interrupts = <38 2 0 0>;
+	dfsrr;
+};
+
+i2c@118100 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cell-index = <1>;
+	compatible = "fsl-i2c";
+	reg = <0x118100 0x100>;
+	interrupts = <38 2 0 0>;
+	dfsrr;
+};
diff --git a/src/powerpc/fsl/qoriq-i2c-1.dtsi b/src/powerpc/fsl/qoriq-i2c-1.dtsi
new file mode 100644
index 000000000000..7989bf5eeb53
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-i2c-1.dtsi
@@ -0,0 +1,53 @@
+/*
+ * QorIQ I2C device tree stub [ controller @ offset 0x119000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@119000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cell-index = <2>;
+	compatible = "fsl-i2c";
+	reg = <0x119000 0x100>;
+	interrupts = <39 2 0 0>;
+	dfsrr;
+};
+
+i2c@119100 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cell-index = <3>;
+	compatible = "fsl-i2c";
+	reg = <0x119100 0x100>;
+	interrupts = <39 2 0 0>;
+	dfsrr;
+};
diff --git a/src/powerpc/fsl/qoriq-mpic.dtsi b/src/powerpc/fsl/qoriq-mpic.dtsi
new file mode 100644
index 000000000000..08f42271f86a
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-mpic.dtsi
@@ -0,0 +1,106 @@
+/*
+ * QorIQ MPIC device tree stub [ controller @ offset 0x40000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mpic: pic@40000 {
+	interrupt-controller;
+	#address-cells = <0>;
+	#interrupt-cells = <4>;
+	reg = <0x40000 0x40000>;
+	compatible = "fsl,mpic", "chrp,open-pic";
+	device_type = "open-pic";
+	clock-frequency = <0x0>;
+};
+
+timer@41100 {
+	compatible = "fsl,mpic-global-timer";
+	reg = <0x41100 0x100 0x41300 4>;
+	interrupts = <0 0 3 0
+		      1 0 3 0
+		      2 0 3 0
+		      3 0 3 0>;
+};
+
+msi0: msi@41600 {
+	compatible = "fsl,mpic-msi";
+	reg = <0x41600 0x200 0x44140 4>;
+	msi-available-ranges = <0 0x100>;
+	interrupts = <
+		0xe0 0 0 0
+		0xe1 0 0 0
+		0xe2 0 0 0
+		0xe3 0 0 0
+		0xe4 0 0 0
+		0xe5 0 0 0
+		0xe6 0 0 0
+		0xe7 0 0 0>;
+};
+
+msi1: msi@41800 {
+	compatible = "fsl,mpic-msi";
+	reg = <0x41800 0x200 0x45140 4>;
+	msi-available-ranges = <0 0x100>;
+	interrupts = <
+		0xe8 0 0 0
+		0xe9 0 0 0
+		0xea 0 0 0
+		0xeb 0 0 0
+		0xec 0 0 0
+		0xed 0 0 0
+		0xee 0 0 0
+		0xef 0 0 0>;
+};
+
+msi2: msi@41a00 {
+	compatible = "fsl,mpic-msi";
+	reg = <0x41a00 0x200 0x46140 4>;
+	msi-available-ranges = <0 0x100>;
+	interrupts = <
+		0xf0 0 0 0
+		0xf1 0 0 0
+		0xf2 0 0 0
+		0xf3 0 0 0
+		0xf4 0 0 0
+		0xf5 0 0 0
+		0xf6 0 0 0
+		0xf7 0 0 0>;
+};
+
+timer@42100 {
+	compatible = "fsl,mpic-global-timer";
+	reg = <0x42100 0x100 0x42300 4>;
+	interrupts = <4 0 3 0
+		      5 0 3 0
+		      6 0 3 0
+		      7 0 3 0>;
+};
diff --git a/src/powerpc/fsl/qoriq-mpic4.3.dtsi b/src/powerpc/fsl/qoriq-mpic4.3.dtsi
new file mode 100644
index 000000000000..64f713c24825
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-mpic4.3.dtsi
@@ -0,0 +1,149 @@
+/*
+ * QorIQ MPIC device tree stub [ controller @ offset 0x40000 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mpic: pic@40000 {
+	interrupt-controller;
+	#address-cells = <0>;
+	#interrupt-cells = <4>;
+	reg = <0x40000 0x40000>;
+	compatible = "fsl,mpic";
+	device_type = "open-pic";
+	clock-frequency = <0x0>;
+};
+
+timer@41100 {
+	compatible = "fsl,mpic-global-timer";
+	reg = <0x41100 0x100 0x41300 4>;
+	interrupts = <0 0 3 0
+		      1 0 3 0
+		      2 0 3 0
+		      3 0 3 0>;
+};
+
+msi0: msi@41600 {
+	compatible = "fsl,mpic-msi-v4.3";
+	reg = <0x41600 0x200 0x44148 4>;
+	interrupts = <
+		0xe0 0 0 0
+		0xe1 0 0 0
+		0xe2 0 0 0
+		0xe3 0 0 0
+		0xe4 0 0 0
+		0xe5 0 0 0
+		0xe6 0 0 0
+		0xe7 0 0 0
+		0x100 0 0 0
+		0x101 0 0 0
+		0x102 0 0 0
+		0x103 0 0 0
+		0x104 0 0 0
+		0x105 0 0 0
+		0x106 0 0 0
+		0x107 0 0 0>;
+};
+
+msi1: msi@41800 {
+	compatible = "fsl,mpic-msi-v4.3";
+	reg = <0x41800 0x200 0x45148 4>;
+	interrupts = <
+		0xe8 0 0 0
+		0xe9 0 0 0
+		0xea 0 0 0
+		0xeb 0 0 0
+		0xec 0 0 0
+		0xed 0 0 0
+		0xee 0 0 0
+		0xef 0 0 0
+		0x108 0 0 0
+		0x109 0 0 0
+		0x10a 0 0 0
+		0x10b 0 0 0
+		0x10c 0 0 0
+		0x10d 0 0 0
+		0x10e 0 0 0
+		0x10f 0 0 0>;
+};
+
+msi2: msi@41a00 {
+	compatible = "fsl,mpic-msi-v4.3";
+	reg = <0x41a00 0x200 0x46148 4>;
+	interrupts = <
+		0xf0 0 0 0
+		0xf1 0 0 0
+		0xf2 0 0 0
+		0xf3 0 0 0
+		0xf4 0 0 0
+		0xf5 0 0 0
+		0xf6 0 0 0
+		0xf7 0 0 0
+		0x110 0 0 0
+		0x111 0 0 0
+		0x112 0 0 0
+		0x113 0 0 0
+		0x114 0 0 0
+		0x115 0 0 0
+		0x116 0 0 0
+		0x117 0 0 0>;
+};
+
+msi3: msi@41c00 {
+	compatible = "fsl,mpic-msi-v4.3";
+	reg = <0x41c00 0x200 0x47148 4>;
+	interrupts = <
+		0xf8 0 0 0
+		0xf9 0 0 0
+		0xfa 0 0 0
+		0xfb 0 0 0
+		0xfc 0 0 0
+		0xfd 0 0 0
+		0xfe 0 0 0
+		0xff 0 0 0
+		0x118 0 0 0
+		0x119 0 0 0
+		0x11a 0 0 0
+		0x11b 0 0 0
+		0x11c 0 0 0
+		0x11d 0 0 0
+		0x11e 0 0 0
+		0x11f 0 0 0>;
+};
+
+timer@42100 {
+	compatible = "fsl,mpic-global-timer";
+	reg = <0x42100 0x100 0x42300 4>;
+	interrupts = <4 0 3 0
+		      5 0 3 0
+		      6 0 3 0
+		      7 0 3 0>;
+};
diff --git a/src/powerpc/fsl/qoriq-qman1-portals.dtsi b/src/powerpc/fsl/qoriq-qman1-portals.dtsi
new file mode 100644
index 000000000000..e77e4b4ed53b
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-qman1-portals.dtsi
@@ -0,0 +1,101 @@
+/*
+ * QorIQ QMan Portal device tree stub for 10 portals & 15 pool channels
+ *
+ * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&qportals {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x100000 0x1000>;
+		interrupts = <104 2 0 0>;
+		cell-index = <0x0>;
+	};
+	qportal1: qman-portal@4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4000 0x4000>, <0x101000 0x1000>;
+		interrupts = <106 2 0 0>;
+		cell-index = <1>;
+	};
+	qportal2: qman-portal@8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8000 0x4000>, <0x102000 0x1000>;
+		interrupts = <108 2 0 0>;
+		cell-index = <2>;
+	};
+	qportal3: qman-portal@c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc000 0x4000>, <0x103000 0x1000>;
+		interrupts = <110 2 0 0>;
+		cell-index = <3>;
+	};
+	qportal4: qman-portal@10000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x10000 0x4000>, <0x104000 0x1000>;
+		interrupts = <112 2 0 0>;
+		cell-index = <4>;
+	};
+	qportal5: qman-portal@14000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x14000 0x4000>, <0x105000 0x1000>;
+		interrupts = <114 2 0 0>;
+		cell-index = <5>;
+	};
+	qportal6: qman-portal@18000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x18000 0x4000>, <0x106000 0x1000>;
+		interrupts = <116 2 0 0>;
+		cell-index = <6>;
+	};
+
+	qportal7: qman-portal@1c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x1c000 0x4000>, <0x107000 0x1000>;
+		interrupts = <118 2 0 0>;
+		cell-index = <7>;
+	};
+	qportal8: qman-portal@20000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x20000 0x4000>, <0x108000 0x1000>;
+		interrupts = <120 2 0 0>;
+		cell-index = <8>;
+	};
+	qportal9: qman-portal@24000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x24000 0x4000>, <0x109000 0x1000>;
+		interrupts = <122 2 0 0>;
+		cell-index = <9>;
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-qman1.dtsi b/src/powerpc/fsl/qoriq-qman1.dtsi
new file mode 100644
index 000000000000..0695778c4386
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-qman1.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ QMan device tree stub [ controller @ offset 0x318000 ]
+ *
+ * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+qman: qman@318000 {
+	compatible = "fsl,qman";
+	reg = <0x318000 0x1000>;
+	interrupts = <16 2 1 3>;
+	fsl,qman-portals = <&qportals>;
+	memory-region = <&qman_fqd &qman_pfdr>;
+};
diff --git a/src/powerpc/fsl/qoriq-qman3.dtsi b/src/powerpc/fsl/qoriq-qman3.dtsi
new file mode 100644
index 000000000000..b379abd1439d
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-qman3.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ QMan rev3 device tree stub [ controller @ offset 0x318000 ]
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+qman: qman@318000 {
+	compatible = "fsl,qman";
+	reg = <0x318000 0x2000>;
+	interrupts = <16 2 1 3>;
+	fsl,qman-portals = <&qportals>;
+	memory-region = <&qman_fqd &qman_pfdr>;
+};
diff --git a/src/powerpc/fsl/qoriq-raid1.0-0.dtsi b/src/powerpc/fsl/qoriq-raid1.0-0.dtsi
new file mode 100644
index 000000000000..8d2e8aa6cf8a
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-raid1.0-0.dtsi
@@ -0,0 +1,85 @@
+/*
+ * QorIQ RAID 1.0 device tree stub [ controller @ offset 0x320000 ]
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+raideng: raideng@320000 {
+	compatible = "fsl,raideng-v1.0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg = <0x320000 0x10000>;
+	ranges = <0 0x320000 0x10000>;
+
+	raideng_jq0@1000 {
+		compatible = "fsl,raideng-v1.0-job-queue";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x1000 0x1000>;
+		ranges = <0x0 0x1000 0x1000>;
+
+		raideng_jr0: jr@0 {
+			compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
+			reg = <0x0 0x400>;
+			interrupts = <139 2 0 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		raideng_jr1: jr@400 {
+			compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-lp-ring";
+			reg = <0x400 0x400>;
+			interrupts = <140 2 0 0>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	raideng_jq1@2000 {
+		compatible = "fsl,raideng-v1.0-job-queue";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2000 0x1000>;
+		ranges = <0x0 0x2000 0x1000>;
+
+		raideng_jr2: jr@0 {
+			compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
+			reg = <0x0 0x400>;
+			interrupts = <141 2 0 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		raideng_jr3: jr@400 {
+			compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-lp-ring";
+			reg = <0x400 0x400>;
+			interrupts = <142 2 0 0>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-rmu-0.dtsi b/src/powerpc/fsl/qoriq-rmu-0.dtsi
new file mode 100644
index 000000000000..ca7fec792e53
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-rmu-0.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ RIO Message Unit device tree stub [ controller @ offset 0xd3000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+rmu: rmu@d3000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,srio-rmu";
+	reg = <0xd3000 0x500>;
+	ranges = <0x0 0xd3000 0x500>;
+
+	message-unit@0 {
+		compatible = "fsl,srio-msg-unit";
+		reg = <0x0 0x100>;
+		interrupts = <
+			60 2 0 0  /* msg1_tx_irq */
+			61 2 0 0>;/* msg1_rx_irq */
+	};
+	message-unit@100 {
+		compatible = "fsl,srio-msg-unit";
+		reg = <0x100 0x100>;
+		interrupts = <
+			62 2 0 0  /* msg2_tx_irq */
+			63 2 0 0>;/* msg2_rx_irq */
+	};
+	doorbell-unit@400 {
+		compatible = "fsl,srio-dbell-unit";
+		reg = <0x400 0x80>;
+		interrupts = <
+			56 2 0 0  /* bell_outb_irq */
+			57 2 0 0>;/* bell_inb_irq */
+	};
+	port-write-unit@4e0 {
+		compatible = "fsl,srio-port-write-unit";
+		reg = <0x4e0 0x20>;
+		interrupts = <16 2 1 11>;
+	};
+};
diff --git a/src/powerpc/fsl/qoriq-sata2-0.dtsi b/src/powerpc/fsl/qoriq-sata2-0.dtsi
new file mode 100644
index 000000000000..b642047fdecf
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-sata2-0.dtsi
@@ -0,0 +1,39 @@
+/*
+ * QorIQ SATAv2 device tree stub [ controller @ offset 0x220000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@220000 {
+	compatible = "fsl,pq-sata-v2";
+	reg = <0x220000 0x1000>;
+	interrupts = <68 0x2 0 0>;
+};
diff --git a/src/powerpc/fsl/qoriq-sata2-1.dtsi b/src/powerpc/fsl/qoriq-sata2-1.dtsi
new file mode 100644
index 000000000000..c57370259750
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-sata2-1.dtsi
@@ -0,0 +1,39 @@
+/*
+ * QorIQ SATAv2 device tree stub [ controller @ offset 0x221000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@221000 {
+	compatible = "fsl,pq-sata-v2";
+	reg = <0x221000 0x1000>;
+	interrupts = <69 0x2 0 0>;
+};
diff --git a/src/powerpc/fsl/qoriq-sec4.0-0.dtsi b/src/powerpc/fsl/qoriq-sec4.0-0.dtsi
new file mode 100644
index 000000000000..02bee5fcbb9a
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-sec4.0-0.dtsi
@@ -0,0 +1,101 @@
+/*
+ * QorIQ Sec/Crypto 4.0 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+	compatible = "fsl,sec-v4.0";
+	fsl,sec-era = <1>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg = <0x300000 0x10000>;
+	ranges = <0 0x300000 0x10000>;
+	interrupts = <92 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		compatible = "fsl,sec-v4.0-job-ring";
+		reg = <0x1000 0x1000>;
+		interrupts = <88 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		compatible = "fsl,sec-v4.0-job-ring";
+		reg = <0x2000 0x1000>;
+		interrupts = <89 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		compatible = "fsl,sec-v4.0-job-ring";
+		reg = <0x3000 0x1000>;
+		interrupts = <90 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		compatible = "fsl,sec-v4.0-job-ring";
+		reg = <0x4000 0x1000>;
+		interrupts = <91 2 0 0>;
+	};
+
+	rtic@6000 {
+		compatible = "fsl,sec-v4.0-rtic";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x6000 0x100>;
+		ranges = <0x0 0x6100 0xe00>;
+
+		rtic_a: rtic-a@0 {
+			compatible = "fsl,sec-v4.0-rtic-memory";
+			reg = <0x00 0x20 0x100 0x80>;
+		};
+
+		rtic_b: rtic-b@20 {
+			compatible = "fsl,sec-v4.0-rtic-memory";
+			reg = <0x20 0x20 0x200 0x80>;
+		};
+
+		rtic_c: rtic-c@40 {
+			compatible = "fsl,sec-v4.0-rtic-memory";
+			reg = <0x40 0x20 0x300 0x80>;
+		};
+
+		rtic_d: rtic-d@60 {
+			compatible = "fsl,sec-v4.0-rtic-memory";
+			reg = <0x60 0x20 0x500 0x80>;
+		};
+	};
+};
+
+sec_mon: sec_mon@314000 {
+	compatible = "fsl,sec-v4.0-mon";
+	reg = <0x314000 0x1000>;
+	interrupts = <93 2 0 0>;
+};
diff --git a/src/powerpc/fsl/qoriq-sec4.2-0.dtsi b/src/powerpc/fsl/qoriq-sec4.2-0.dtsi
new file mode 100644
index 000000000000..7f7574e53323
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-sec4.2-0.dtsi
@@ -0,0 +1,110 @@
+/*
+ * QorIQ Sec/Crypto 4.2 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+	compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
+	fsl,sec-era = <3>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg		 = <0x300000 0x10000>;
+	ranges		 = <0 0x300000 0x10000>;
+	interrupts	 = <92 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		compatible = "fsl,sec-v4.2-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x1000 0x1000>;
+		interrupts = <88 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		compatible = "fsl,sec-v4.2-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x2000 0x1000>;
+		interrupts = <89 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		compatible = "fsl,sec-v4.2-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x3000 0x1000>;
+		interrupts = <90 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		compatible = "fsl,sec-v4.2-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x4000 0x1000>;
+		interrupts = <91 2 0 0>;
+	};
+
+	rtic@6000 {
+		compatible = "fsl,sec-v4.2-rtic",
+			     "fsl,sec-v4.0-rtic";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x6000 0x100>;
+		ranges = <0x0 0x6100 0xe00>;
+
+		rtic_a: rtic-a@0 {
+			compatible = "fsl,sec-v4.2-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x00 0x20 0x100 0x80>;
+		};
+
+		rtic_b: rtic-b@20 {
+			compatible = "fsl,sec-v4.2-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x20 0x20 0x200 0x80>;
+		};
+
+		rtic_c: rtic-c@40 {
+			compatible = "fsl,sec-v4.2-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x40 0x20 0x300 0x80>;
+		};
+
+		rtic_d: rtic-d@60 {
+			compatible = "fsl,sec-v4.2-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x60 0x20 0x500 0x80>;
+		};
+	};
+};
+
+sec_mon: sec_mon@314000 {
+	compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
+	reg = <0x314000 0x1000>;
+	interrupts = <93 2 0 0>;
+};
diff --git a/src/powerpc/fsl/qoriq-sec5.0-0.dtsi b/src/powerpc/fsl/qoriq-sec5.0-0.dtsi
new file mode 100644
index 000000000000..e298efbb0f3e
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-sec5.0-0.dtsi
@@ -0,0 +1,110 @@
+/*
+ * QorIQ Sec/Crypto 5.0 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+	compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+	fsl,sec-era = <5>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg		 = <0x300000 0x10000>;
+	ranges		 = <0 0x300000 0x10000>;
+	interrupts	 = <92 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		compatible = "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x1000 0x1000>;
+		interrupts = <88 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		compatible = "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x2000 0x1000>;
+		interrupts = <89 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		compatible = "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x3000 0x1000>;
+		interrupts = <90 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		compatible = "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x4000 0x1000>;
+		interrupts = <91 2 0 0>;
+	};
+
+	rtic@6000 {
+		compatible = "fsl,sec-v5.0-rtic",
+			     "fsl,sec-v4.0-rtic";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x6000 0x100>;
+		ranges = <0x0 0x6100 0xe00>;
+
+		rtic_a: rtic-a@0 {
+			compatible = "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x00 0x20 0x100 0x80>;
+		};
+
+		rtic_b: rtic-b@20 {
+			compatible = "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x20 0x20 0x200 0x80>;
+		};
+
+		rtic_c: rtic-c@40 {
+			compatible = "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x40 0x20 0x300 0x80>;
+		};
+
+		rtic_d: rtic-d@60 {
+			compatible = "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x60 0x20 0x500 0x80>;
+		};
+	};
+};
+
+sec_mon: sec_mon@314000 {
+	compatible = "fsl,sec-v5.0-mon", "fsl,sec-v4.0-mon";
+	reg = <0x314000 0x1000>;
+	interrupts = <93 2 0 0>;
+};
diff --git a/src/powerpc/fsl/qoriq-sec5.2-0.dtsi b/src/powerpc/fsl/qoriq-sec5.2-0.dtsi
new file mode 100644
index 000000000000..33ff09d52e05
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-sec5.2-0.dtsi
@@ -0,0 +1,119 @@
+/*
+ * QorIQ Sec/Crypto 5.2 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+	compatible = "fsl,sec-v5.2", "fsl,sec-v5.0", "fsl,sec-v4.0";
+	fsl,sec-era = <5>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg		 = <0x300000 0x10000>;
+	ranges		 = <0 0x300000 0x10000>;
+	interrupts	 = <92 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		compatible = "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x1000 0x1000>;
+		interrupts = <88 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		compatible = "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x2000 0x1000>;
+		interrupts = <89 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		compatible = "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x3000 0x1000>;
+		interrupts = <90 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		compatible = "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x4000 0x1000>;
+		interrupts = <91 2 0 0>;
+	};
+
+	rtic@6000 {
+		compatible = "fsl,sec-v5.2-rtic",
+			     "fsl,sec-v5.0-rtic",
+			     "fsl,sec-v4.0-rtic";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x6000 0x100>;
+		ranges = <0x0 0x6100 0xe00>;
+
+		rtic_a: rtic-a@0 {
+			compatible = "fsl,sec-v5.2-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x00 0x20 0x100 0x80>;
+		};
+
+		rtic_b: rtic-b@20 {
+			compatible = "fsl,sec-v5.2-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x20 0x20 0x200 0x80>;
+		};
+
+		rtic_c: rtic-c@40 {
+			compatible = "fsl,sec-v5.2-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x40 0x20 0x300 0x80>;
+		};
+
+		rtic_d: rtic-d@60 {
+			compatible = "fsl,sec-v5.2-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x60 0x20 0x500 0x80>;
+		};
+	};
+};
+
+sec_mon: sec_mon@314000 {
+	compatible = "fsl,sec-v5.2-mon", "fsl,sec-v5.0-mon", "fsl,sec-v4.0-mon";
+	reg = <0x314000 0x1000>;
+	interrupts = <93 2 0 0>;
+};
diff --git a/src/powerpc/fsl/qoriq-sec5.3-0.dtsi b/src/powerpc/fsl/qoriq-sec5.3-0.dtsi
new file mode 100644
index 000000000000..08778221c194
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-sec5.3-0.dtsi
@@ -0,0 +1,119 @@
+/*
+ * QorIQ Sec/Crypto 5.3 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+	compatible = "fsl,sec-v5.3", "fsl,sec-v5.0", "fsl,sec-v4.0";
+	fsl,sec-era = <4>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg		 = <0x300000 0x10000>;
+	ranges		 = <0 0x300000 0x10000>;
+	interrupts	 = <92 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		compatible = "fsl,sec-v5.3-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x1000 0x1000>;
+		interrupts = <88 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		compatible = "fsl,sec-v5.3-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x2000 0x1000>;
+		interrupts = <89 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		compatible = "fsl,sec-v5.3-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x3000 0x1000>;
+		interrupts = <90 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		compatible = "fsl,sec-v5.3-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x4000 0x1000>;
+		interrupts = <91 2 0 0>;
+	};
+
+	rtic@6000 {
+		compatible = "fsl,sec-v5.3-rtic",
+			     "fsl,sec-v5.0-rtic",
+			     "fsl,sec-v4.0-rtic";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x6000 0x100>;
+		ranges = <0x0 0x6100 0xe00>;
+
+		rtic_a: rtic-a@0 {
+			compatible = "fsl,sec-v5.3-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x00 0x20 0x100 0x80>;
+		};
+
+		rtic_b: rtic-b@20 {
+			compatible = "fsl,sec-v5.3-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x20 0x20 0x200 0x80>;
+		};
+
+		rtic_c: rtic-c@40 {
+			compatible = "fsl,sec-v5.3-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x40 0x20 0x300 0x80>;
+		};
+
+		rtic_d: rtic-d@60 {
+			compatible = "fsl,sec-v5.3-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x60 0x20 0x500 0x80>;
+		};
+	};
+};
+
+sec_mon: sec_mon@314000 {
+	compatible = "fsl,sec-v5.3-mon", "fsl,sec-v5.0-mon", "fsl,sec-v4.0-mon";
+	reg = <0x314000 0x1000>;
+	interrupts = <93 2 0 0>;
+};
diff --git a/src/powerpc/fsl/qoriq-sec6.0-0.dtsi b/src/powerpc/fsl/qoriq-sec6.0-0.dtsi
new file mode 100644
index 000000000000..7d4a6a2354f4
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-sec6.0-0.dtsi
@@ -0,0 +1,57 @@
+/*
+ * QorIQ Sec/Crypto 6.0 device tree stub
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+	compatible = "fsl,sec-v6.0", "fsl,sec-v5.0",
+		     "fsl,sec-v4.0";
+	fsl,sec-era = <6>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	jr@1000 {
+		compatible = "fsl,sec-v6.0-job-ring",
+			     "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.4-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg	   = <0x1000 0x1000>;
+	};
+
+	jr@2000 {
+		compatible = "fsl,sec-v6.0-job-ring",
+			     "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.4-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg	   = <0x2000 0x1000>;
+	};
diff --git a/src/powerpc/fsl/qoriq-usb2-dr-0.dtsi b/src/powerpc/fsl/qoriq-usb2-dr-0.dtsi
new file mode 100644
index 000000000000..4dd6f84c239c
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-usb2-dr-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ USB DR device tree stub [ controller @ offset 0x211000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@211000 {
+	compatible = "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+	reg = <0x211000 0x1000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	interrupts = <45 0x2 0 0>;
+};
diff --git a/src/powerpc/fsl/qoriq-usb2-mph-0.dtsi b/src/powerpc/fsl/qoriq-usb2-mph-0.dtsi
new file mode 100644
index 000000000000..f053835aa1c7
--- /dev/null
+++ b/src/powerpc/fsl/qoriq-usb2-mph-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ USB Host device tree stub [ controller @ offset 0x210000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@210000 {
+	compatible = "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+	reg = <0x210000 0x1000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	interrupts = <44 0x2 0 0>;
+};
diff --git a/src/powerpc/fsl/sbc8641d.dts b/src/powerpc/fsl/sbc8641d.dts
new file mode 100644
index 000000000000..75870a124903
--- /dev/null
+++ b/src/powerpc/fsl/sbc8641d.dts
@@ -0,0 +1,180 @@
+/*
+ * SBC8641D Device Tree Source
+ *
+ * Copyright 2008 Wind River Systems Inc.
+ *
+ * Paul Gortmaker (see MAINTAINERS for contact information)
+ *
+ * Based largely on the mpc8641_hpcn.dts by Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc8641si-pre.dtsi"
+
+/ {
+	model = "SBC8641D";
+	compatible = "wind,sbc8641";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;	// 512M at 0x0
+	};
+
+	lbc: localbus@f8005000 {
+		reg = <0xf8005000 0x1000>;
+
+		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
+			  1 0 0xf0000000 0x00010000	// 64KB EEPROM
+			  2 0 0xf1000000 0x00100000	// EPLD (1MB)
+			  3 0 0xe0000000 0x04000000	// 64MB LB SDRAM (CS3)
+			  4 0 0xe4000000 0x04000000	// 64MB LB SDRAM (CS4)
+			  6 0 0xf4000000 0x00100000	// LCD display (1MB)
+			  7 0 0xe8000000 0x04000000>;	// 64MB OneNAND
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x01000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "dtb";
+				reg = <0x00000000 0x00100000>;
+				read-only;
+			};
+			partition@300000 {
+				label = "kernel";
+				reg = <0x00100000 0x00400000>;
+				read-only;
+			};
+			partition@400000 {
+				label = "fs";
+				reg = <0x00500000 0x00a00000>;
+			};
+			partition@700000 {
+				label = "firmware";
+				reg = <0x00f00000 0x00100000>;
+				read-only;
+			};
+		};
+
+		epld@2,0 {
+			compatible = "wrs,epld-localbus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			reg = <2 0 0x100000>;
+			ranges = <0 0 5 0 1	// User switches
+				  1 0 5 1 1	// Board ID/Rev
+				  3 0 5 3 1>;	// LEDs
+		};
+	};
+
+	soc: soc@f8000000 {
+		ranges = <0x00000000 0xf8000000 0x00100000>;
+
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+			phy1: ethernet-phy@0 {
+				reg = <0>;
+			};
+			phy2: ethernet-phy@1 {
+				reg = <1>;
+			};
+			phy3: ethernet-phy@2 {
+				reg = <2>;
+			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet1: ethernet@25000 {
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@25520 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet2: ethernet@26000 {
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@26520 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet3: ethernet@27000 {
+			tbi-handle = <&tbi3>;
+			phy-handle = <&phy3>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@27520 {
+			tbi3: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+	};
+
+	pci0: pcie@f8008000 {
+		reg = <0xf8008000 0x1000>;
+		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+		interrupt-map-mask = <0xff00 0 0 7>;
+
+		pcie@0 {
+			ranges = <0x02000000 0x0 0x80000000
+				  0x02000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00100000>;
+		};
+
+	};
+
+	pci1: pcie@f8009000 {
+		reg = <0xf8009000 0x1000>;
+		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
+
+		pcie@0 {
+			ranges = <0x02000000 0x0 0xa0000000
+				  0x02000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00100000>;
+		};
+	};
+};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/src/powerpc/fsl/t1023rdb.dts b/src/powerpc/fsl/t1023rdb.dts
new file mode 100644
index 000000000000..5ba6fbfca274
--- /dev/null
+++ b/src/powerpc/fsl/t1023rdb.dts
@@ -0,0 +1,232 @@
+/*
+ * T1023 RDB Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t102xsi-pre.dtsi"
+
+/ {
+	model = "fsl,T1023RDB";
+	compatible = "fsl,T1023RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  1 0 0xf 0xff800000 0x00010000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x1 0x0 0x10000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25fl512s", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <10000000>; /* input clk */
+			};
+		};
+
+		i2c@118000 {
+			eeprom@50 {
+				compatible = "st,m24256";
+				reg = <0x50>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+				interrupts = <0x5 0x1 0 0>;
+			};
+		};
+
+		i2c@118100 {
+			current-sensor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			current-sensor@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		fman@400000 {
+			fm1mac1: ethernet@e0000 {
+				phy-handle = <&sgmii_rtk_phy2>;
+				phy-connection-type = "sgmii";
+				sleep = <&rcpm 0x80000000>;
+			};
+
+			fm1mac2: ethernet@e2000 {
+				sleep = <&rcpm 0x40000000>;
+			};
+
+			fm1mac3: ethernet@e4000 {
+				phy-handle = <&sgmii_aqr_phy3>;
+				phy-connection-type = "sgmii-2500";
+				sleep = <&rcpm 0x20000000>;
+			};
+
+			fm1mac4: ethernet@e6000 {
+				phy-handle = <&rgmii_rtk_phy1>;
+				phy-connection-type = "rgmii";
+				sleep = <&rcpm 0x10000000>;
+			};
+
+
+			mdio0: mdio@fc000 {
+				rgmii_rtk_phy1: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+				sgmii_rtk_phy2: ethernet-phy@3 {
+					reg = <0x3>;
+				};
+			};
+
+			xmdio0: mdio@fd000 {
+				sgmii_aqr_phy3: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x2>;
+				};
+			};
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+#include "t1023si-post.dtsi"
diff --git a/src/powerpc/fsl/t1023si-post.dtsi b/src/powerpc/fsl/t1023si-post.dtsi
new file mode 100644
index 000000000000..da2894c59479
--- /dev/null
+++ b/src/powerpc/fsl/t1023si-post.dtsi
@@ -0,0 +1,538 @@
+/*
+ * T1023 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <25 2 0 0>;
+};
+
+&pci0 {
+	compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <20 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <20 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+&pci1 {
+	compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	interrupts = <21 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <21 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+&pci2 {
+	compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <22 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <22 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,t1023-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,t1023-dcsr-cnpc", "fsl,dcsr-cnpc";
+		reg = <0x1000 0x1000 0x1002000 0x10000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0x1A000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,t1023-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,t1023-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,t1023-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x30000 0x1000 0x1022000 0x10000>;
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x31000 0x1000 0x1042000 0x10000>;
+	};
+	dcsr-cpu-sb-proxy@100000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x100000 0x1000 0x101000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@108000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x108000 0x1000 0x109000 0x1000>;
+	};
+};
+
+&bportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	bman-portal@0 {
+		cell-index = <0x0>;
+		compatible = "fsl,bman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <105 2 0 0>;
+	};
+	bman-portal@4000 {
+		cell-index = <0x1>;
+		compatible = "fsl,bman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <107 2 0 0>;
+	};
+	bman-portal@8000 {
+		cell-index = <2>;
+		compatible = "fsl,bman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <109 2 0 0>;
+	};
+	bman-portal@c000 {
+		cell-index = <0x3>;
+		compatible = "fsl,bman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <111 2 0 0>;
+	};
+	bman-portal@10000 {
+		cell-index = <0x4>;
+		compatible = "fsl,bman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <113 2 0 0>;
+	};
+	bman-portal@14000 {
+		cell-index = <0x5>;
+		compatible = "fsl,bman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <115 2 0 0>;
+	};
+};
+
+&qportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <104 0x2 0 0>;
+		cell-index = <0x0>;
+	};
+	qportal1: qman-portal@4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <106 0x2 0 0>;
+		cell-index = <0x1>;
+	};
+	qportal2: qman-portal@8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <108 0x2 0 0>;
+		cell-index = <0x2>;
+	};
+	qportal3: qman-portal@c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <110 0x2 0 0>;
+		cell-index = <0x3>;
+	};
+	qportal4: qman-portal@10000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <112 0x2 0 0>;
+		cell-index = <0x4>;
+	};
+	qportal5: qman-portal@14000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <114 0x2 0 0>;
+		cell-index = <0x5>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <16>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v5.0",
+				"fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,t1023-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000>;
+		interrupts = <16 2 1 27>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet2-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x1000>;
+		ranges = <0 0x20000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <128 1>;
+			fsl,secondary-cache-geometry = <32 2>;
+		};
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,t1023-device-config", "fsl,qoriq-device-config-2.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		fsl,liodn-bits = <12>;
+	};
+
+/include/ "qoriq-clockgen2.dtsi"
+	global-utilities@e1000 {
+		compatible = "fsl,t1023-clockgen", "fsl,qoriq-clockgen-2.0";
+		mux0: mux0@0 {
+			#clock-cells = <0>;
+			reg = <0x0 4>;
+			compatible = "fsl,core-mux-clock";
+			clocks = <&pll0 0>, <&pll0 1>;
+			clock-names = "pll0_0", "pll0_1";
+			clock-output-names = "cmux0";
+		};
+		mux1: mux1@20 {
+			#clock-cells = <0>;
+			reg = <0x20 4>;
+			compatible = "fsl,core-mux-clock";
+			clocks = <&pll0 0>, <&pll0 1>;
+			clock-names = "pll0_0", "pll0_1";
+			clock-output-names = "cmux1";
+		};
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,t1023-rcpm", "fsl,qoriq-rcpm-2.1";
+		reg = <0xe2000 0x1000>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,t1023-sfp";
+		reg = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,t1023-serdes";
+		reg = <0xea000 0x4000>;
+	};
+
+	tmu: tmu@f0000 {
+		compatible = "fsl,qoriq-tmu";
+		reg = <0xf0000 0x1000>;
+		interrupts = <18 2 0 0>;
+		fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>;
+		fsl,tmu-calibration = <0x00000000 0x0000000f
+				       0x00000001 0x00000017
+				       0x00000002 0x0000001e
+				       0x00000003 0x00000026
+				       0x00000004 0x0000002e
+				       0x00000005 0x00000035
+				       0x00000006 0x0000003d
+				       0x00000007 0x00000044
+				       0x00000008 0x0000004c
+				       0x00000009 0x00000053
+				       0x0000000a 0x0000005b
+				       0x0000000b 0x00000064
+
+				       0x00010000 0x00000011
+				       0x00010001 0x0000001c
+				       0x00010002 0x00000024
+				       0x00010003 0x0000002b
+				       0x00010004 0x00000034
+				       0x00010005 0x00000039
+				       0x00010006 0x00000042
+				       0x00010007 0x0000004c
+				       0x00010008 0x00000051
+				       0x00010009 0x0000005a
+				       0x0001000a 0x00000063
+
+				       0x00020000 0x00000013
+				       0x00020001 0x00000019
+				       0x00020002 0x00000024
+				       0x00020003 0x0000002c
+				       0x00020004 0x00000035
+				       0x00020005 0x0000003d
+				       0x00020006 0x00000046
+				       0x00020007 0x00000050
+				       0x00020008 0x00000059
+
+				       0x00030000 0x00000002
+				       0x00030001 0x0000000d
+				       0x00030002 0x00000019
+				       0x00030003 0x00000024>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			thermal-sensors = <&tmu>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu1 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	scfg: global-utilities@fc000 {
+		compatible = "fsl,t1023-scfg";
+		reg = <0xfc000 0x1000>;
+	};
+
+/include/ "elo3-dma-0.dtsi"
+/include/ "elo3-dma-1.dtsi"
+
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		compatible = "fsl,t1023-esdhc", "fsl,esdhc";
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+		sdhci,auto-cmd12;
+		no-1-8-v;
+	};
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-gpio-1.dtsi"
+/include/ "qoriq-gpio-2.dtsi"
+/include/ "qoriq-gpio-3.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+	usb0: usb@210000 {
+		compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+		phy_type = "utmi";
+		port0;
+	};
+/include/ "qoriq-usb2-dr-0.dtsi"
+	usb1: usb@211000 {
+		compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+		dr_mode = "host";
+		phy_type = "utmi";
+	};
+/include/ "qoriq-sata2-0.dtsi"
+	sata@220000 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+	};
+
+/include/ "qoriq-sec5.0-0.dtsi"
+/include/ "qoriq-qman3.dtsi"
+/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman3l-0.dtsi"
+/include/ "qoriq-fman3-0-10g-0-best-effort.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+	};
+};
diff --git a/src/powerpc/fsl/t1024qds.dts b/src/powerpc/fsl/t1024qds.dts
new file mode 100644
index 000000000000..d6858b7cd93f
--- /dev/null
+++ b/src/powerpc/fsl/t1024qds.dts
@@ -0,0 +1,280 @@
+/*
+ * T1024 QDS Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t102xsi-pre.dtsi"
+
+/ {
+	model = "fsl,T1024QDS";
+	compatible = "fsl,T1024QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,tetra-fpga", "fsl,fpga-qixis";
+			reg = <3 0 0x300>;
+			ranges = <0 3 0 0x300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,n25q128a11", "jedec,spi-nor";  /* 16MB */
+				reg = <0>;
+				spi-max-frequency = <10000000>;
+			};
+
+			flash@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "sst,sst25wf040", "jedec,spi-nor";  /* 512KB */
+				reg = <1>;
+				spi-max-frequency = <10000000>;
+			};
+
+			flash@2 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "eon,en25s64", "jedec,spi-nor";   /* 8MB */
+				reg = <2>;
+				spi-max-frequency = <10000000>;
+			};
+
+			slic@2 {
+				compatible = "maxim,ds26522";
+				reg = <2>;
+				spi-max-frequency = <2000000>;
+			};
+
+			slic@3 {
+				compatible = "maxim,ds26522";
+				reg = <3>;
+				spi-max-frequency = <2000000>;
+			};
+		};
+
+		i2c@118000 {
+			pca9547@77 {
+				compatible = "nxp,pca9547";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					eeprom@50 {
+						compatible = "atmel,24c512";
+						reg = <0x50>;
+					};
+
+					eeprom@51 {
+						compatible = "atmel,24c02";
+						reg = <0x51>;
+					};
+
+					eeprom@57 {
+						compatible = "atmel,24c02";
+						reg = <0x57>;
+					};
+				};
+
+				i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+
+					ina220@40 {
+						compatible = "ti,ina220";
+						reg = <0x40>;
+						shunt-resistor = <1000>;
+					};
+
+					ina220@41 {
+						compatible = "ti,ina220";
+						reg = <0x41>;
+						shunt-resistor = <1000>;
+					};
+				};
+
+				i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+
+					adt7461@4c {
+						/* Thermal Monitor */
+						compatible = "adi,adt7461";
+						reg = <0x4c>;
+					};
+
+					eeprom@55 {
+						compatible = "atmel,24c02";
+						reg = <0x55>;
+					};
+
+					eeprom@56 {
+						compatible = "atmel,24c512";
+						reg = <0x56>;
+					};
+
+					eeprom@57 {
+						compatible = "atmel,24c512";
+						reg = <0x57>;
+					};
+				};
+			};
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0x5 0x1 0 0>;
+			};
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+#include "t1024si-post.dtsi"
diff --git a/src/powerpc/fsl/t1024rdb.dts b/src/powerpc/fsl/t1024rdb.dts
new file mode 100644
index 000000000000..73a645324bc1
--- /dev/null
+++ b/src/powerpc/fsl/t1024rdb.dts
@@ -0,0 +1,269 @@
+/*
+ * T1024 RDB Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t102xsi-pre.dtsi"
+
+/ {
+	model = "fsl,T1024RDB";
+	compatible = "fsl,T1024RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		sg_2500_aqr105_phy4 = &sg_2500_aqr105_phy4;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		board-control@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,t1024-cpld";
+			reg = <3 0 0x300>;
+			ranges = <0 3 0 0x300>;
+			bank-width = <1>;
+			device-width = <1>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,n25q512ax3", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <10000000>; /* input clk */
+			};
+
+			slic@1 {
+				compatible = "maxim,ds26522";
+				reg = <1>;
+				spi-max-frequency = <2000000>;
+			};
+
+			slic@2 {
+				compatible = "maxim,ds26522";
+				reg = <2>;
+				spi-max-frequency = <2000000>;
+			};
+		};
+
+		i2c@118000 {
+			adt7461@4c {
+				/* Thermal Monitor */
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			current-sensor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c256";
+				reg = <0x50>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+		};
+
+		i2c@118100 {
+			pca9546@77 {
+				compatible = "nxp,pca9546";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		fman@400000 {
+			fm1mac1: ethernet@e0000 {
+				phy-handle = <&xg_aqr105_phy3>;
+				phy-connection-type = "xgmii";
+				sleep = <&rcpm 0x80000000>;
+			};
+
+			fm1mac2: ethernet@e2000 {
+				sleep = <&rcpm 0x40000000>;
+			};
+
+			fm1mac3: ethernet@e4000 {
+				phy-handle = <&rgmii_phy2>;
+				phy-connection-type = "rgmii";
+				sleep = <&rcpm 0x20000000>;
+			};
+
+			fm1mac4: ethernet@e6000 {
+				phy-handle = <&rgmii_phy1>;
+				phy-connection-type = "rgmii";
+				sleep = <&rcpm 0x10000000>;
+			};
+
+
+			mdio0: mdio@fc000 {
+				rgmii_phy1: ethernet-phy@2 {
+					reg = <0x2>;
+				};
+				rgmii_phy2: ethernet-phy@6 {
+					reg = <0x6>;
+				};
+			};
+
+			xmdio0: mdio@fd000 {
+				xg_aqr105_phy3: ethernet-phy@1 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x1>;
+				};
+				sg_2500_aqr105_phy4: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x2>;
+				};
+			};
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+#include "t1024si-post.dtsi"
diff --git a/src/powerpc/fsl/t1024si-post.dtsi b/src/powerpc/fsl/t1024si-post.dtsi
new file mode 100644
index 000000000000..bb480346a58d
--- /dev/null
+++ b/src/powerpc/fsl/t1024si-post.dtsi
@@ -0,0 +1,100 @@
+/*
+ * T1024 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "t1023si-post.dtsi"
+
+/ {
+	aliases {
+		vga = &display;
+		display = &display;
+	};
+
+	qe:qe@ffe140000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "qe";
+		compatible = "fsl,qe";
+		ranges = <0x0 0xf 0xfe140000 0x40000>;
+		reg = <0xf 0xfe140000 0 0x480>;
+		fsl,qe-num-riscs = <1>;
+		fsl,qe-num-snums = <28>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+	};
+};
+
+&soc {
+	display:display@180000 {
+		compatible = "fsl,t1024-diu", "fsl,diu";
+		reg = <0x180000 1000>;
+		interrupts = <74 2 0 0>;
+	};
+};
+
+&qe {
+	qeic: interrupt-controller@80 {
+		interrupt-controller;
+		compatible = "fsl,qe-ic";
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		interrupts = <95 2 0 0  94 2 0 0>; //high:79 low:78
+	};
+
+	ucc@2000 {
+		cell-index = <1>;
+		reg = <0x2000 0x200>;
+		interrupts = <32>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@2200 {
+		cell-index = <3>;
+		reg = <0x2200 0x200>;
+		interrupts = <34>;
+		interrupt-parent = <&qeic>;
+	};
+
+	muram@10000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,qe-muram", "fsl,cpm-muram";
+		ranges = <0x0 0x10000 0x6000>;
+
+		data-only@0 {
+			compatible = "fsl,qe-muram-data", "fsl,cpm-muram-data";
+			reg = <0x0 0x6000>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/t102xsi-pre.dtsi b/src/powerpc/fsl/t102xsi-pre.dtsi
new file mode 100644
index 000000000000..9d08a363bab3
--- /dev/null
+++ b/src/powerpc/fsl/t102xsi-pre.dtsi
@@ -0,0 +1,95 @@
+/*
+ * T1024/T1023 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e5500_power_isa.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		dma0 = &dma0;
+		dma1 = &dma1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		sdhc = &sdhc;
+
+		crypto = &crypto;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e5500@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_1>;
+			#cooling-cells = <2>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e5500@1 {
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&mux1>;
+			next-level-cache = <&L2_2>;
+			#cooling-cells = <2>;
+			L2_2: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};
diff --git a/src/powerpc/fsl/t1040d4rdb.dts b/src/powerpc/fsl/t1040d4rdb.dts
new file mode 100644
index 000000000000..fb6bc02ebb60
--- /dev/null
+++ b/src/powerpc/fsl/t1040d4rdb.dts
@@ -0,0 +1,46 @@
+/*
+ * T1040D4RDB Device Tree Source
+ *
+ * Copyright 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t104xsi-pre.dtsi"
+/include/ "t104xd4rdb.dtsi"
+
+/ {
+	model = "fsl,T1040D4RDB";
+	compatible = "fsl,T1040D4RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+};
+
+#include "t1040si-post.dtsi"
diff --git a/src/powerpc/fsl/t1040qds.dts b/src/powerpc/fsl/t1040qds.dts
new file mode 100644
index 000000000000..5f76edc7838c
--- /dev/null
+++ b/src/powerpc/fsl/t1040qds.dts
@@ -0,0 +1,46 @@
+/*
+ * T1040QDS Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t104xsi-pre.dtsi"
+/include/ "t104xqds.dtsi"
+
+/ {
+	model = "fsl,T1040QDS";
+	compatible = "fsl,T1040QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+};
+
+#include "t1040si-post.dtsi"
diff --git a/src/powerpc/fsl/t1040rdb.dts b/src/powerpc/fsl/t1040rdb.dts
new file mode 100644
index 000000000000..621f2c6ee6ad
--- /dev/null
+++ b/src/powerpc/fsl/t1040rdb.dts
@@ -0,0 +1,78 @@
+/*
+ * T1040RDB Device Tree Source
+ *
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t104xsi-pre.dtsi"
+/include/ "t104xrdb.dtsi"
+
+/ {
+	model = "fsl,T1040RDB";
+	compatible = "fsl,T1040RDB";
+
+	aliases {
+		phy_sgmii_2 = &phy_sgmii_2;
+	};
+
+	soc@ffe000000 {
+		fman@400000 {
+			ethernet@e0000 {
+				fixed-link = <0 1 1000 0 0>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				fixed-link = <1 1 1000 0 0>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_sgmii_2>;
+				phy-connection-type = "sgmii";
+			};
+
+			mdio@fc000 {
+				phy_sgmii_2: ethernet-phy@03 {
+					reg = <0x03>;
+				};
+			};
+		};
+	};
+
+	ifc: localbus@ffe124000 {
+		cpld@3,0 {
+			compatible = "fsl,t1040rdb-cpld";
+		};
+	};
+};
+
+#include "t1040si-post.dtsi"
diff --git a/src/powerpc/fsl/t1040si-post.dtsi b/src/powerpc/fsl/t1040si-post.dtsi
new file mode 100644
index 000000000000..44e399b17f6f
--- /dev/null
+++ b/src/powerpc/fsl/t1040si-post.dtsi
@@ -0,0 +1,720 @@
+/*
+ * T1040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2013 - 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <25 2 0 0>;
+};
+
+&pci0 {
+	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <20 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <20 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+&pci1 {
+	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	interrupts = <21 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <21 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+&pci2 {
+	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <22 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <22 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+&pci3 {
+	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <23 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <23 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 43 1 0 0
+			0000 0 0 2 &mpic 0 1 0 0
+			0000 0 0 3 &mpic 4 1 0 0
+			0000 0 0 4 &mpic 8 1 0 0
+			>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,t1040-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,t1040-dcsr-cnpc", "fsl,dcsr-cnpc";
+		reg = <0x1000 0x1000 0x1002000 0x10000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0x1A000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,t1040-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,t1040-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,t1040-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,t1040-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x30000 0x1000 0x1022000 0x10000>;
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x31000 0x1000 0x1042000 0x10000>;
+	};
+	dcsr-cpu-sb-proxy@100000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x100000 0x1000 0x101000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@108000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x108000 0x1000 0x109000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@110000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x110000 0x1000 0x111000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@118000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x118000 0x1000 0x119000 0x1000>;
+	};
+};
+
+&bportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	bman-portal@0 {
+		compatible = "fsl,bman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <105 2 0 0>;
+	};
+	bman-portal@4000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <107 2 0 0>;
+	};
+	bman-portal@8000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <109 2 0 0>;
+	};
+	bman-portal@c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <111 2 0 0>;
+	};
+	bman-portal@10000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <113 2 0 0>;
+	};
+	bman-portal@14000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <115 2 0 0>;
+	};
+	bman-portal@18000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x18000 0x4000>, <0x1006000 0x1000>;
+		interrupts = <117 2 0 0>;
+	};
+	bman-portal@1c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
+		interrupts = <119 2 0 0>;
+	};
+	bman-portal@20000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x20000 0x4000>, <0x1008000 0x1000>;
+		interrupts = <121 2 0 0>;
+	};
+	bman-portal@24000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x24000 0x4000>, <0x1009000 0x1000>;
+		interrupts = <123 2 0 0>;
+	};
+};
+
+&qportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <104 0x2 0 0>;
+		cell-index = <0x0>;
+	};
+	qportal1: qman-portal@4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <106 0x2 0 0>;
+		cell-index = <0x1>;
+	};
+	qportal2: qman-portal@8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <108 0x2 0 0>;
+		cell-index = <0x2>;
+	};
+	qportal3: qman-portal@c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <110 0x2 0 0>;
+		cell-index = <0x3>;
+	};
+	qportal4: qman-portal@10000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <112 0x2 0 0>;
+		cell-index = <0x4>;
+	};
+	qportal5: qman-portal@14000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <114 0x2 0 0>;
+		cell-index = <0x5>;
+	};
+	qportal6: qman-portal@18000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x18000 0x4000>, <0x1006000 0x1000>;
+		interrupts = <116 0x2 0 0>;
+		cell-index = <0x6>;
+	};
+	qportal7: qman-portal@1c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
+		interrupts = <118 0x2 0 0>;
+		cell-index = <0x7>;
+	};
+	qportal8: qman-portal@20000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x20000 0x4000>, <0x1008000 0x1000>;
+		interrupts = <120 0x2 0 0>;
+		cell-index = <0x8>;
+	};
+	qportal9: qman-portal@24000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x24000 0x4000>, <0x1009000 0x1000>;
+		interrupts = <122 0x2 0 0>;
+		cell-index = <0x9>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <16>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v5.0",
+				"fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,t1040-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000>;
+		interrupts = <16 2 1 27>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x1000>;
+		ranges = <0 0x20000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <128 1>;
+			fsl,secondary-cache-geometry = <16 2>;
+		};
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,t1040-device-config", "fsl,qoriq-device-config-2.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		fsl,liodn-bits = <12>;
+	};
+
+/include/ "qoriq-clockgen2.dtsi"
+	global-utilities@e1000 {
+		compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0";
+
+		mux0: mux0@0 {
+			#clock-cells = <0>;
+			reg = <0x0 4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
+			clock-names = "pll0", "pll0-div2", "pll1-div4",
+				"pll1", "pll1-div2", "pll1-div4";
+			clock-output-names = "cmux0";
+		};
+
+		mux1: mux1@20 {
+			#clock-cells = <0>;
+			reg = <0x20 4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
+			clock-names = "pll0", "pll0-div2", "pll1-div4",
+				"pll1", "pll1-div2", "pll1-div4";
+			clock-output-names = "cmux1";
+		};
+
+		mux2: mux2@40 {
+			#clock-cells = <0>;
+			reg = <0x40 4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
+			clock-names = "pll0", "pll0-div2", "pll1-div4",
+				"pll1", "pll1-div2", "pll1-div4";
+			clock-output-names = "cmux2";
+		};
+
+		mux3: mux3@60 {
+			#clock-cells = <0>;
+			reg = <0x60 4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
+			clock-names = "pll0_0", "pll0_1", "pll0_2",
+				"pll1_0", "pll1_1", "pll1_2";
+			clock-output-names = "cmux3";
+		};
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,t1040-rcpm", "fsl,qoriq-rcpm-2.1";
+		reg = <0xe2000 0x1000>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,t1040-sfp";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,t1040-serdes";
+		reg	   = <0xea000 0x4000>;
+	};
+
+	tmu: tmu@f0000 {
+		compatible = "fsl,qoriq-tmu";
+		reg = <0xf0000 0x1000>;
+		interrupts = <18 2 0 0>;
+		fsl,tmu-range = <0xa0000 0x90026 0x8004a 0x1006a>;
+		fsl,tmu-calibration = <0x00000000 0x00000025
+				       0x00000001 0x00000028
+				       0x00000002 0x0000002d
+				       0x00000003 0x00000031
+				       0x00000004 0x00000036
+				       0x00000005 0x0000003a
+				       0x00000006 0x00000040
+				       0x00000007 0x00000044
+				       0x00000008 0x0000004a
+				       0x00000009 0x0000004f
+				       0x0000000a 0x00000054
+
+				       0x00010000 0x0000000d
+				       0x00010001 0x00000013
+				       0x00010002 0x00000019
+				       0x00010003 0x0000001f
+				       0x00010004 0x00000025
+				       0x00010005 0x0000002d
+				       0x00010006 0x00000033
+				       0x00010007 0x00000043
+				       0x00010008 0x0000004b
+				       0x00010009 0x00000053
+
+				       0x00020000 0x00000010
+				       0x00020001 0x00000017
+				       0x00020002 0x0000001f
+				       0x00020003 0x00000029
+				       0x00020004 0x00000031
+				       0x00020005 0x0000003c
+				       0x00020006 0x00000042
+				       0x00020007 0x0000004d
+				       0x00020008 0x00000056
+
+				       0x00030000 0x00000012
+				       0x00030001 0x0000001d>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			thermal-sensors = <&tmu>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu1 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+				};
+				map2 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu2 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+				};
+				map3 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu3 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	scfg: global-utilities@fc000 {
+		compatible = "fsl,t1040-scfg";
+		reg = <0xfc000 0x1000>;
+	};
+
+/include/ "elo3-dma-0.dtsi"
+/include/ "elo3-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		compatible = "fsl,t1040-esdhc", "fsl,esdhc";
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+		sdhci,auto-cmd12;
+	};
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-gpio-1.dtsi"
+/include/ "qoriq-gpio-2.dtsi"
+/include/ "qoriq-gpio-3.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+		usb0: usb@210000 {
+			compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
+			fsl,iommu-parent = <&pamu0>;
+			fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+			phy_type = "utmi";
+			port0;
+		};
+/include/ "qoriq-usb2-dr-0.dtsi"
+		usb1: usb@211000 {
+			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+			fsl,iommu-parent = <&pamu0>;
+			fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+			dr_mode = "host";
+			phy_type = "utmi";
+		};
+
+	display@180000 {
+		compatible = "fsl,t1040-diu", "fsl,diu";
+		reg = <0x180000 1000>;
+		interrupts = <74 2 0 0>;
+	};
+
+/include/ "qoriq-sata2-0.dtsi"
+	sata@220000 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+	};
+/include/ "qoriq-sata2-1.dtsi"
+	sata@221000 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+	};
+/include/ "qoriq-sec5.0-0.dtsi"
+/include/ "qoriq-qman3.dtsi"
+/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman3l-0.dtsi"
+/include/ "qoriq-fman3-0-1g-0.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+/include/ "qoriq-fman3-0-1g-4.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		mdio@fc000 {
+			interrupts = <100 1 0 0>;
+		};
+
+		mdio@fd000 {
+			status = "disabled";
+		};
+	};
+};
+
+&qe {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "qe";
+	compatible = "fsl,qe";
+	fsl,qe-num-riscs = <1>;
+	fsl,qe-num-snums = <28>;
+
+	qeic: interrupt-controller@80 {
+		interrupt-controller;
+		compatible = "fsl,qe-ic";
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		interrupts = <95 2 0 0  94 2 0 0>; //high:79 low:78
+	};
+
+	ucc@2000 {
+		cell-index = <1>;
+		reg = <0x2000 0x200>;
+		interrupts = <32>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@2200 {
+		cell-index = <3>;
+		reg = <0x2200 0x200>;
+		interrupts = <34>;
+		interrupt-parent = <&qeic>;
+	};
+
+	muram@10000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,qe-muram", "fsl,cpm-muram";
+		ranges = <0x0 0x10000 0x6000>;
+
+		data-only@0 {
+			compatible = "fsl,qe-muram-data",
+			"fsl,cpm-muram-data";
+			reg = <0x0 0x6000>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/t1042d4rdb.dts b/src/powerpc/fsl/t1042d4rdb.dts
new file mode 100644
index 000000000000..fcd2aeb5b8ac
--- /dev/null
+++ b/src/powerpc/fsl/t1042d4rdb.dts
@@ -0,0 +1,105 @@
+/*
+ * T1042D4RDB Device Tree Source
+ *
+ * Copyright 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t104xsi-pre.dtsi"
+/include/ "t104xd4rdb.dtsi"
+
+/ {
+	model = "fsl,T1042D4RDB";
+	compatible = "fsl,T1042D4RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	ifc: localbus@ffe124000 {
+		cpld@3,0 {
+			compatible = "fsl,t1040d4rdb-cpld",
+					"fsl,deepsleep-cpld";
+		};
+	};
+
+	soc: soc@ffe000000 {
+		fman0: fman@400000 {
+			ethernet@e0000 {
+				phy-handle = <&phy_sgmii_0>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy_sgmii_1>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_sgmii_2>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy_rgmii_0>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phy_rgmii_1>;
+				phy-connection-type = "rgmii";
+			};
+
+			mdio0: mdio@fc000 {
+				phy_sgmii_0: ethernet-phy@02 {
+					reg = <0x02>;
+				};
+
+				phy_sgmii_1: ethernet-phy@03 {
+					reg = <0x03>;
+				};
+
+				phy_sgmii_2: ethernet-phy@01 {
+					reg = <0x01>;
+				};
+
+				phy_rgmii_0: ethernet-phy@04 {
+					reg = <0x04>;
+				};
+
+				phy_rgmii_1: ethernet-phy@05 {
+					reg = <0x05>;
+				};
+			};
+		};
+	};
+
+};
+
+#include "t1042si-post.dtsi"
diff --git a/src/powerpc/fsl/t1042qds.dts b/src/powerpc/fsl/t1042qds.dts
new file mode 100644
index 000000000000..90a4a73bb905
--- /dev/null
+++ b/src/powerpc/fsl/t1042qds.dts
@@ -0,0 +1,46 @@
+/*
+ * T1042QDS Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t104xsi-pre.dtsi"
+/include/ "t104xqds.dtsi"
+
+/ {
+	model = "fsl,T1042QDS";
+	compatible = "fsl,T1042QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+};
+
+#include "t1042si-post.dtsi"
diff --git a/src/powerpc/fsl/t1042rdb.dts b/src/powerpc/fsl/t1042rdb.dts
new file mode 100644
index 000000000000..2c138627b1b4
--- /dev/null
+++ b/src/powerpc/fsl/t1042rdb.dts
@@ -0,0 +1,76 @@
+/*
+ * T1042RDB Device Tree Source
+ *
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t104xsi-pre.dtsi"
+/include/ "t104xrdb.dtsi"
+
+/ {
+	model = "fsl,T1042RDB";
+	compatible = "fsl,T1042RDB";
+
+	aliases {
+		phy_sgmii_2 = &phy_sgmii_2;
+	};
+
+	soc@ffe000000 {
+		fman@400000 {
+			ethernet@e0000 {
+			       status = "disabled";
+			};
+
+			ethernet@e2000 {
+			       status = "disabled";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_sgmii_2>;
+				phy-connection-type = "sgmii";
+			};
+
+			mdio@fc000 {
+				phy_sgmii_2: ethernet-phy@03 {
+					reg = <0x03>;
+				};
+			};
+		};
+	};
+
+	ifc: localbus@ffe124000 {
+		cpld@3,0 {
+			compatible = "fsl,t1042rdb-cpld";
+		};
+	};
+};
+
+#include "t1042si-post.dtsi"
diff --git a/src/powerpc/fsl/t1042rdb_pi.dts b/src/powerpc/fsl/t1042rdb_pi.dts
new file mode 100644
index 000000000000..8ec3ff45e6fc
--- /dev/null
+++ b/src/powerpc/fsl/t1042rdb_pi.dts
@@ -0,0 +1,73 @@
+/*
+ * T1042RDB_PI Device Tree Source
+ *
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t104xsi-pre.dtsi"
+/include/ "t104xrdb.dtsi"
+
+/ {
+	model = "fsl,T1042RDB_PI";
+	compatible = "fsl,T1042RDB_PI";
+
+	ifc: localbus@ffe124000 {
+		cpld@3,0 {
+			compatible = "fsl,t1042rdb_pi-cpld";
+		};
+	};
+
+	soc: soc@ffe000000 {
+		i2c@118000 {
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+				interrupts = <0x2 0x1 0 0>;
+			};
+		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				status = "disabled";
+			};
+
+			ethernet@e2000 {
+				status = "disabled";
+			};
+
+			ethernet@e4000 {
+				status = "disabled";
+			};
+		};
+	};
+};
+
+#include "t1042si-post.dtsi"
diff --git a/src/powerpc/fsl/t1042si-post.dtsi b/src/powerpc/fsl/t1042si-post.dtsi
new file mode 100644
index 000000000000..a5544f93689c
--- /dev/null
+++ b/src/powerpc/fsl/t1042si-post.dtsi
@@ -0,0 +1,37 @@
+/*
+ * T1042 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "t1040si-post.dtsi"
+
+/* Place holder for ethernet related device tree nodes */
diff --git a/src/powerpc/fsl/t104xd4rdb.dtsi b/src/powerpc/fsl/t104xd4rdb.dtsi
new file mode 100644
index 000000000000..863f9431285f
--- /dev/null
+++ b/src/powerpc/fsl/t104xd4rdb.dtsi
@@ -0,0 +1,253 @@
+/*
+ * T1040D4RDB/T1042D4RDB Device Tree Source
+ *
+ * Copyright 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		cpld@3,0 {
+			compatible = "fsl,t1040d4rdb-cpld";
+			reg = <3 0 0x300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,n25q512ax3", "jedec,spi-nor";
+				reg = <0>;
+				/* input clock */
+				spi-max-frequency = <10000000>;
+			};
+			slic@1 {
+				compatible = "maxim,ds26522";
+				reg = <1>;
+				spi-max-frequency = <2000000>; /* input clock */
+			};
+			slic@2 {
+				compatible = "maxim,ds26522";
+				reg = <2>;
+				spi-max-frequency = <2000000>; /* input clock */
+			};
+		};
+		i2c@118000 {
+			hwmon@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+				interrupts = <0x2 0x1 0 0>;
+			};
+		};
+
+		i2c@118100 {
+			mux@77 {
+				/*
+				 * Child nodes of mux depend on which i2c
+				 * devices are connected via the mini PCI
+				 * connector slot1, the mini PCI connector
+				 * slot2, the HDMI connector, and the PEX
+				 * slot. Systems with such devices attached
+				 * should provide a wrapper .dts file that
+				 * includes this one, and adds those nodes
+				 */
+				compatible = "nxp,pca9546";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x0 0x0 0x10000000
+			  0x01000000 0 0x0 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
+			  0x01000000 0 0 0xf 0xf8010000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe270000 {
+		reg = <0xf 0xfe270000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	qe: qe@ffe140000 {
+		ranges = <0x0 0xf 0xfe140000 0x40000>;
+		reg = <0xf 0xfe140000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+
+		si1: si@700 {
+			compatible = "fsl,t1040-qe-si";
+			reg = <0x700 0x80>;
+		};
+
+		siram1: siram@1000 {
+			compatible = "fsl,t1040-qe-siram";
+			reg = <0x1000 0x800>;
+		};
+
+		ucc_hdlc: ucc@2000 {
+			compatible = "fsl,ucc-hdlc";
+			rx-clock-name = "clk8";
+			tx-clock-name = "clk9";
+			fsl,rx-sync-clock = "rsync_pin";
+			fsl,tx-sync-clock = "tsync_pin";
+			fsl,tx-timeslot-mask = <0xfffffffe>;
+			fsl,rx-timeslot-mask = <0xfffffffe>;
+			fsl,tdm-framer-type = "e1";
+			fsl,tdm-id = <0>;
+			fsl,siram-entry-id = <0>;
+			fsl,tdm-interface;
+		};
+
+		ucc_serial: ucc@2200 {
+			compatible = "fsl,t1040-ucc-uart";
+			port-number = <0>;
+			rx-clock-name = "brg2";
+			tx-clock-name = "brg2";
+		};
+	};
+};
diff --git a/src/powerpc/fsl/t104xqds.dtsi b/src/powerpc/fsl/t104xqds.dtsi
new file mode 100644
index 000000000000..2fd4cbe7098f
--- /dev/null
+++ b/src/powerpc/fsl/t104xqds.dtsi
@@ -0,0 +1,407 @@
+/*
+ * T104xQDS Device Tree Source
+ *
+ * Copyright 2013 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	model = "fsl,T1040QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		emi1_rgmii0 = &t1040mdio0;
+		emi1_rgmii1 = &t1040mdio1;
+		emi1_slot3 = &t1040mdio3;
+		emi1_slot5 = &t1040mdio5;
+		emi1_slot6 = &t1040mdio6;
+		emi1_slot7 = &t1040mdio7;
+		rgmii_phy1 = &rgmii_phy1;
+		rgmii_phy2 = &rgmii_phy2;
+		phy_s3_01 = &phy_s3_01;
+		phy_s3_02 = &phy_s3_02;
+		phy_s3_03 = &phy_s3_03;
+		phy_s3_04 = &phy_s3_04;
+		phy_s5_01 = &phy_s5_01;
+		phy_s5_02 = &phy_s5_02;
+		phy_s5_03 = &phy_s5_03;
+		phy_s5_04 = &phy_s5_04;
+		phy_s6_01 = &phy_s6_01;
+		phy_s6_02 = &phy_s6_02;
+		phy_s6_03 = &phy_s6_03;
+		phy_s6_04 = &phy_s6_04;
+		phy_s7_01 = &phy_s7_01;
+		phy_s7_02 = &phy_s7_02;
+		phy_s7_03 = &phy_s7_03;
+		phy_s7_04 = &phy_s7_04;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,fpga-qixis";
+			reg = <3 0 0x300>;
+			ranges = <0 3 0 0x300>;
+
+			mdio-mux-emi1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "mdio-mux-mmioreg", "mdio-mux";
+				mdio-parent-bus = <&mdio0>;
+				reg = <0x54 1>;
+				mux-mask = <0xe0>;
+
+				t1040mdio0: mdio@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x00>;
+					status = "disabled";
+
+					rgmii_phy1: ethernet-phy@1 {
+						reg = <0x1>;
+					};
+				};
+
+				t1040mdio1: mdio@20 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x20>;
+					status = "disabled";
+
+					rgmii_phy2: ethernet-phy@2 {
+						reg = <0x2>;
+					};
+				};
+
+				t1040mdio3: mdio@60 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x60>;
+					status = "disabled";
+
+					phy_s3_01: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					phy_s3_02: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					phy_s3_03: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					phy_s3_04: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+
+				t1040mdio5: mdio@a0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0xa0>;
+
+					phy_s5_01: ethernet-phy@1c {
+						reg = <0x14>;
+					};
+
+					phy_s5_02: ethernet-phy@1d {
+						reg = <0x15>;
+					};
+
+					phy_s5_03: ethernet-phy@1e {
+						reg = <0x16>;
+					};
+
+					phy_s5_04: ethernet-phy@1f {
+						reg = <0x17>;
+					};
+				};
+
+				t1040mdio6: mdio@c0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0xc0>;
+
+					phy_s6_01: ethernet-phy@1c {
+						reg = <0x18>;
+					};
+
+					phy_s6_02: ethernet-phy@1d {
+						reg = <0x19>;
+					};
+
+					phy_s6_03: ethernet-phy@1e {
+						reg = <0x1a>;
+					};
+
+					phy_s6_04: ethernet-phy@1f {
+						reg = <0x1b>;
+					};
+				};
+
+				t1040mdio7: mdio@e0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0xe0>;
+					status = "disabled";
+
+					phy_s7_01: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					phy_s7_02: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					phy_s7_03: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					phy_s7_04: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+			};
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,n25q128a11", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <10000000>; /* input clock */
+			};
+		};
+
+		i2c@118000 {
+			pca9547@77 {
+				compatible = "philips,pca9547";
+				reg = <0x77>;
+			};
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				fixed-link = <0 1 1000 0 0>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				fixed-link = <1 1 1000 0 0>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_s7_03>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&rgmii_phy1>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&rgmii_phy2>;
+				phy-connection-type = "rgmii";
+			};
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe270000 {
+		reg = <0xf 0xfe270000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	qe: qe@ffe140000 {
+		ranges = <0x0 0xf 0xfe140000 0x40000>;
+		reg = <0xf 0xfe140000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+
+		si1: si@700 {
+			compatible = "fsl,t1040-qe-si";
+			reg = <0x700 0x80>;
+		};
+
+		siram1: siram@1000 {
+			compatible = "fsl,t1040-qe-siram";
+			reg = <0x1000 0x800>;
+		};
+
+		ucc_hdlc: ucc@2000 {
+			compatible = "fsl,ucc-hdlc";
+			rx-clock-name = "clk8";
+			tx-clock-name = "clk9";
+			fsl,rx-sync-clock = "rsync_pin";
+			fsl,tx-sync-clock = "tsync_pin";
+			fsl,tx-timeslot-mask = <0xfffffffe>;
+			fsl,rx-timeslot-mask = <0xfffffffe>;
+			fsl,tdm-framer-type = "e1";
+			fsl,tdm-id = <0>;
+			fsl,siram-entry-id = <0>;
+			fsl,tdm-interface;
+		};
+
+		ucc_serial: ucc@2200 {
+			compatible = "fsl,t1040-ucc-uart";
+			port-number = <0>;
+			rx-clock-name = "brg2";
+			tx-clock-name = "brg2";
+		};
+	};
+};
diff --git a/src/powerpc/fsl/t104xrdb.dtsi b/src/powerpc/fsl/t104xrdb.dtsi
new file mode 100644
index 000000000000..5fdddbd2a62b
--- /dev/null
+++ b/src/powerpc/fsl/t104xrdb.dtsi
@@ -0,0 +1,263 @@
+/*
+ * T1040RDB/T1042RDB Device Tree Source
+ *
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	aliases {
+		phy_rgmii_0 = &phy_rgmii_0;
+		phy_rgmii_1 = &phy_rgmii_1;
+		phy_sgmii_2 = &phy_sgmii_2;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		cpld@3,0 {
+			reg = <3 0 0x300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,n25q512ax3", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <10000000>; /* input clock */
+			};
+			slic@3 {
+				compatible = "maxim,ds26522";
+				reg = <3>;
+				spi-max-frequency = <2000000>; /* input clock */
+			};
+		};
+
+		i2c@118000 {
+			adt7461@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c@118100 {
+			pca9546@77 {
+				compatible = "nxp,pca9546";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		fman@400000 {
+			ethernet@e6000 {
+				phy-handle = <&phy_rgmii_0>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phy_rgmii_1>;
+				phy-connection-type = "rgmii";
+			};
+
+			mdio0: mdio@fc000 {
+				phy_sgmii_2: ethernet-phy@03 {
+					reg = <0x03>;
+				};
+
+				phy_rgmii_0: ethernet-phy@01 {
+					reg = <0x01>;
+				};
+
+				phy_rgmii_1: ethernet-phy@02 {
+					reg = <0x02>;
+				};
+			};
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe270000 {
+		reg = <0xf 0xfe270000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	qe: qe@ffe140000 {
+		ranges = <0x0 0xf 0xfe140000 0x40000>;
+		reg = <0xf 0xfe140000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+
+		si1: si@700 {
+			compatible = "fsl,t1040-qe-si";
+			reg = <0x700 0x80>;
+		};
+
+		siram1: siram@1000 {
+			compatible = "fsl,t1040-qe-siram";
+			reg = <0x1000 0x800>;
+		};
+
+		ucc_hdlc: ucc@2000 {
+			compatible = "fsl,ucc-hdlc";
+			rx-clock-name = "clk8";
+			tx-clock-name = "clk9";
+			fsl,rx-sync-clock = "rsync_pin";
+			fsl,tx-sync-clock = "tsync_pin";
+			fsl,tx-timeslot-mask = <0xfffffffe>;
+			fsl,rx-timeslot-mask = <0xfffffffe>;
+			fsl,tdm-framer-type = "e1";
+			fsl,tdm-id = <0>;
+			fsl,siram-entry-id = <0>;
+			fsl,tdm-interface;
+		};
+
+		ucc_serial: ucc@2200 {
+			compatible = "fsl,t1040-ucc-uart";
+			port-number = <0>;
+			rx-clock-name = "brg2";
+			tx-clock-name = "brg2";
+		};
+	};
+};
diff --git a/src/powerpc/fsl/t104xsi-pre.dtsi b/src/powerpc/fsl/t104xsi-pre.dtsi
new file mode 100644
index 000000000000..6db0ee8b1384
--- /dev/null
+++ b/src/powerpc/fsl/t104xsi-pre.dtsi
@@ -0,0 +1,115 @@
+/*
+ * T1040/T1042 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2013-2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e5500_power_isa.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		sdhc = &sdhc;
+
+		crypto = &crypto;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e5500@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_1>;
+			#cooling-cells = <2>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e5500@1 {
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&mux1>;
+			next-level-cache = <&L2_2>;
+			#cooling-cells = <2>;
+			L2_2: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu2: PowerPC,e5500@2 {
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&mux2>;
+			next-level-cache = <&L2_3>;
+			#cooling-cells = <2>;
+			L2_3: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu3: PowerPC,e5500@3 {
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&mux3>;
+			next-level-cache = <&L2_4>;
+			#cooling-cells = <2>;
+			L2_4: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};
diff --git a/src/powerpc/fsl/t2080qds.dts b/src/powerpc/fsl/t2080qds.dts
new file mode 100644
index 000000000000..8d190e8c62ce
--- /dev/null
+++ b/src/powerpc/fsl/t2080qds.dts
@@ -0,0 +1,213 @@
+/*
+ * T2080QDS Device Tree Source
+ *
+ * Copyright 2013 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t208xsi-pre.dtsi"
+/include/ "t208xqds.dtsi"
+
+/ {
+	model = "fsl,T2080QDS";
+	compatible = "fsl,T2080QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		emi1_slot1 = &t2080mdio2;
+		emi1_slot2 = &t2080mdio3;
+		emi1_slot3 = &t2080mdio4;
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+};
+
+&soc {
+	fman@400000 {
+		ethernet@e0000 {
+			phy-handle = <&phy_sgmii_s3_1e>;
+			phy-connection-type = "xgmii";
+		};
+
+		ethernet@e2000 {
+			phy-handle = <&phy_sgmii_s3_1f>;
+			phy-connection-type = "xgmii";
+		};
+
+		ethernet@e4000 {
+			phy-handle = <&rgmii_phy1>;
+			phy-connection-type = "rgmii";
+		};
+
+		ethernet@e6000 {
+			phy-handle = <&rgmii_phy2>;
+			phy-connection-type = "rgmii";
+		};
+
+		ethernet@e8000 {
+			phy-handle = <&phy_sgmii_s2_1e>;
+			phy-connection-type = "sgmii";
+		};
+
+		ethernet@ea000 {
+			phy-handle = <&phy_sgmii_s2_1d>;
+			phy-connection-type = "sgmii";
+		};
+
+		ethernet@f0000 {
+			phy-handle = <&phy_xaui_slot3>;
+			phy-connection-type = "xgmii";
+		};
+
+		ethernet@f2000 {
+			phy-handle = <&phy_sgmii_s3_1f>;
+			phy-connection-type = "xgmii";
+		};
+
+		mdio@fd000 {
+			phy_xaui_slot3: ethernet-phy@3 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				reg = <0x3>;
+			};
+		};
+	};
+};
+
+&boardctrl {
+	mdio-mux-emi1 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		mdio-parent-bus = <&mdio0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x54 1>;
+		mux-mask = <0xe0>;
+
+		t2080mdio0: mdio@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			rgmii_phy1: ethernet-phy@1 {
+				reg = <0x1>;
+			};
+		};
+
+		t2080mdio1: mdio@20 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x20>;
+
+			rgmii_phy2: ethernet-phy@2 {
+				reg = <0x2>;
+			};
+		};
+
+		t2080mdio2: mdio@40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x40>;
+			status = "disabled";
+
+			phy_sgmii_s1_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s1_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s1_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s1_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		t2080mdio3: mdio@c0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xc0>;
+
+			phy_sgmii_s2_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s2_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s2_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s2_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		t2080mdio4: mdio@60 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x60>;
+			status = "disabled";
+
+			phy_sgmii_s3_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s3_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s3_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s3_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+	};
+};
+
+/include/ "t2080si-post.dtsi"
diff --git a/src/powerpc/fsl/t2080rdb.dts b/src/powerpc/fsl/t2080rdb.dts
new file mode 100644
index 000000000000..836e4c965b22
--- /dev/null
+++ b/src/powerpc/fsl/t2080rdb.dts
@@ -0,0 +1,122 @@
+/*
+ * T2080PCIe-RDB Board Device Tree Source
+ *
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t208xsi-pre.dtsi"
+/include/ "t208xrdb.dtsi"
+
+/ {
+	model = "fsl,T2080RDB";
+	compatible = "fsl,T2080RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+};
+
+&soc {
+	fman@400000 {
+		ethernet@e0000 {
+			phy-handle = <&xg_aq1202_phy3>;
+			phy-connection-type = "xgmii";
+		};
+
+		ethernet@e2000 {
+			phy-handle = <&xg_aq1202_phy4>;
+			phy-connection-type = "xgmii";
+		};
+
+		ethernet@e4000 {
+			phy-handle = <&rgmii_phy1>;
+			phy-connection-type = "rgmii";
+		};
+
+		ethernet@e6000 {
+			phy-handle = <&rgmii_phy2>;
+			phy-connection-type = "rgmii";
+		};
+
+		ethernet@f0000 {
+			phy-handle = <&xg_cs4315_phy1>;
+			phy-connection-type = "xgmii";
+		};
+
+		ethernet@f2000 {
+			phy-handle = <&xg_cs4315_phy2>;
+			phy-connection-type = "xgmii";
+		};
+
+		mdio@fc000 {
+			rgmii_phy1: ethernet-phy@1 {
+				reg = <0x1>;
+			};
+			rgmii_phy2: ethernet-phy@2 {
+				reg = <0x2>;
+			};
+		};
+
+		mdio@fd000 {
+			xg_cs4315_phy1: ethernet-phy@c {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				reg = <0xc>;
+			};
+
+			xg_cs4315_phy2: ethernet-phy@d {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				reg = <0xd>;
+			};
+
+			xg_aq1202_phy3: ethernet-phy@0 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				reg = <0x0>;
+			};
+
+			xg_aq1202_phy4: ethernet-phy@1 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				reg = <0x1>;
+			};
+		};
+	};
+};
+
+/include/ "t2080si-post.dtsi"
diff --git a/src/powerpc/fsl/t2080si-post.dtsi b/src/powerpc/fsl/t2080si-post.dtsi
new file mode 100644
index 000000000000..082ec2044060
--- /dev/null
+++ b/src/powerpc/fsl/t2080si-post.dtsi
@@ -0,0 +1,69 @@
+/*
+ * T2080 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t2081si-post.dtsi"
+
+&soc {
+/include/ "qoriq-sata2-0.dtsi"
+	sata@220000 {
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+	};
+
+/include/ "qoriq-sata2-1.dtsi"
+	sata@221000 {
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <16 2 1 11>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+	};
+};
diff --git a/src/powerpc/fsl/t2081qds.dts b/src/powerpc/fsl/t2081qds.dts
new file mode 100644
index 000000000000..fc5c4a30f7ad
--- /dev/null
+++ b/src/powerpc/fsl/t2081qds.dts
@@ -0,0 +1,265 @@
+/*
+ * T2081QDS Device Tree Source
+ *
+ * Copyright 2013 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t208xsi-pre.dtsi"
+/include/ "t208xqds.dtsi"
+
+/ {
+	model = "fsl,T2081QDS";
+	compatible = "fsl,T2081QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		emi1_slot1 = &t2081mdio2;
+		emi1_slot2 = &t2081mdio3;
+		emi1_slot3 = &t2081mdio4;
+		emi1_slot5 = &t2081mdio5;
+		emi1_slot6 = &t2081mdio6;
+		emi1_slot7 = &t2081mdio7;
+	};
+};
+
+&soc {
+	fman@400000 {
+		ethernet@e0000 {
+			phy-handle = <&phy_sgmii_s7_1c>;
+			phy-connection-type = "sgmii";
+		};
+
+		ethernet@e2000 {
+			phy-handle = <&phy_sgmii_s7_1d>;
+			phy-connection-type = "sgmii";
+		};
+
+		ethernet@e4000 {
+			phy-handle = <&rgmii_phy1>;
+			phy-connection-type = "rgmii";
+		};
+
+		ethernet@e6000 {
+			phy-handle = <&rgmii_phy2>;
+			phy-connection-type = "rgmii";
+		};
+
+		ethernet@e8000 {
+			phy-handle = <&phy_sgmii_s3_1c>;
+			phy-connection-type = "sgmii";
+		};
+
+		ethernet@ea000 {
+			phy-handle = <&phy_sgmii_s7_1f>;
+			phy-connection-type = "sgmii";
+		};
+
+		ethernet@f0000 {
+			phy-handle = <&phy_sgmii_s2_1c>;
+			phy-connection-type = "xgmii";
+		};
+
+		ethernet@f2000 {
+			phy-handle = <&phy_sgmii_s7_1e>;
+			phy-connection-type = "xgmii";
+		};
+	};
+};
+
+&boardctrl {
+	mdio-mux-emi1 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		mdio-parent-bus = <&mdio0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x54 1>;
+		mux-mask = <0xe0>;
+
+		t2081mdio0: mdio@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			rgmii_phy1: ethernet-phy@1 {
+				reg = <0x1>;
+			};
+		};
+
+		t2081mdio1: mdio@20 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x20>;
+
+			rgmii_phy2: ethernet-phy@2 {
+				reg = <0x2>;
+			};
+		};
+
+		t2081mdio2: mdio@40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x40>;
+
+			phy_sgmii_s1_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s1_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s1_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s1_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		t2081mdio3: mdio@60 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x60>;
+
+			phy_sgmii_s2_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s2_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s2_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s2_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		t2081mdio4: mdio@80 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x80>;
+			status = "disabled";
+
+			phy_sgmii_s3_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s3_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s3_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s3_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		t2081mdio5: mdio@a0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xa0>;
+			status = "disabled";
+
+			phy_sgmii_s5_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s5_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s5_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s5_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		t2081mdio6: mdio@c0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xc0>;
+			status = "disabled";
+
+			phy_sgmii_s6_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s6_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s6_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s6_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		t2081mdio7: mdio@e0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe0>;
+
+			phy_sgmii_s7_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s7_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s7_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s7_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+	};
+};
+
+/include/ "t2081si-post.dtsi"
diff --git a/src/powerpc/fsl/t2081si-post.dtsi b/src/powerpc/fsl/t2081si-post.dtsi
new file mode 100644
index 000000000000..c744569a20e1
--- /dev/null
+++ b/src/powerpc/fsl/t2081si-post.dtsi
@@ -0,0 +1,682 @@
+/*
+ * T2081 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2013 - 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <25 2 0 0>;
+};
+
+/* controller at 0x240000 */
+&pci0 {
+	compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <20 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <20 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+		>;
+	};
+};
+
+/* controller at 0x250000 */
+&pci1 {
+	compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	interrupts = <21 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <21 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+		>;
+	};
+};
+
+/* controller at 0x260000 */
+&pci2 {
+	compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <22 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <22 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+		>;
+	};
+};
+
+/* controller at 0x270000 */
+&pci3 {
+	compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <23 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <23 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 43 1 0 0
+			0000 0 0 2 &mpic 0 1 0 0
+			0000 0 0 3 &mpic 4 1 0 0
+			0000 0 0 4 &mpic 8 1 0 0
+		>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,t2080-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0
+			      94 2 0 0
+			      95 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,t2080-dcsr-cnpc", "fsl,dcsr-cnpc";
+		reg = <0x1000 0x1000 0x1002000 0x10000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0x1A000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,t2080-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,t2080-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,t2080-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x30000 0x1000 0x1022000 0x10000>;
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x31000 0x1000 0x1042000 0x10000>;
+	};
+	dcsr-snpc@32000 {
+		compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x32000 0x1000 0x1062000 0x10000>;
+	};
+	dcsr-cpu-sb-proxy@100000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x100000 0x1000 0x101000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@108000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x108000 0x1000 0x109000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@110000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x110000 0x1000 0x111000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@118000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x118000 0x1000 0x119000 0x1000>;
+	};
+};
+
+&bportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	bman-portal@0 {
+		compatible = "fsl,bman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <105 2 0 0>;
+	};
+	bman-portal@4000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <107 2 0 0>;
+	};
+	bman-portal@8000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <109 2 0 0>;
+	};
+	bman-portal@c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <111 2 0 0>;
+	};
+	bman-portal@10000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <113 2 0 0>;
+	};
+	bman-portal@14000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <115 2 0 0>;
+	};
+	bman-portal@18000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x18000 0x4000>, <0x1006000 0x1000>;
+		interrupts = <117 2 0 0>;
+	};
+	bman-portal@1c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
+		interrupts = <119 2 0 0>;
+	};
+	bman-portal@20000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x20000 0x4000>, <0x1008000 0x1000>;
+		interrupts = <121 2 0 0>;
+	};
+	bman-portal@24000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x24000 0x4000>, <0x1009000 0x1000>;
+		interrupts = <123 2 0 0>;
+	};
+	bman-portal@28000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x28000 0x4000>, <0x100a000 0x1000>;
+		interrupts = <125 2 0 0>;
+	};
+	bman-portal@2c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x2c000 0x4000>, <0x100b000 0x1000>;
+		interrupts = <127 2 0 0>;
+	};
+	bman-portal@30000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x30000 0x4000>, <0x100c000 0x1000>;
+		interrupts = <129 2 0 0>;
+	};
+	bman-portal@34000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x34000 0x4000>, <0x100d000 0x1000>;
+		interrupts = <131 2 0 0>;
+	};
+	bman-portal@38000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x38000 0x4000>, <0x100e000 0x1000>;
+		interrupts = <133 2 0 0>;
+	};
+	bman-portal@3c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x3c000 0x4000>, <0x100f000 0x1000>;
+		interrupts = <135 2 0 0>;
+	};
+	bman-portal@40000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x40000 0x4000>, <0x1010000 0x1000>;
+		interrupts = <137 2 0 0>;
+	};
+	bman-portal@44000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x44000 0x4000>, <0x1011000 0x1000>;
+		interrupts = <139 2 0 0>;
+	};
+};
+
+&qportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <104 0x2 0 0>;
+		cell-index = <0x0>;
+	};
+	qportal1: qman-portal@4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <106 0x2 0 0>;
+		cell-index = <0x1>;
+	};
+	qportal2: qman-portal@8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <108 0x2 0 0>;
+		cell-index = <0x2>;
+	};
+	qportal3: qman-portal@c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <110 0x2 0 0>;
+		cell-index = <0x3>;
+	};
+	qportal4: qman-portal@10000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <112 0x2 0 0>;
+		cell-index = <0x4>;
+	};
+	qportal5: qman-portal@14000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <114 0x2 0 0>;
+		cell-index = <0x5>;
+	};
+	qportal6: qman-portal@18000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x18000 0x4000>, <0x1006000 0x1000>;
+		interrupts = <116 0x2 0 0>;
+		cell-index = <0x6>;
+	};
+	qportal7: qman-portal@1c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
+		interrupts = <118 0x2 0 0>;
+		cell-index = <0x7>;
+	};
+	qportal8: qman-portal@20000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x20000 0x4000>, <0x1008000 0x1000>;
+		interrupts = <120 0x2 0 0>;
+		cell-index = <0x8>;
+	};
+	qportal9: qman-portal@24000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x24000 0x4000>, <0x1009000 0x1000>;
+		interrupts = <122 0x2 0 0>;
+		cell-index = <0x9>;
+	};
+	qportal10: qman-portal@28000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x28000 0x4000>, <0x100a000 0x1000>;
+		interrupts = <124 0x2 0 0>;
+		cell-index = <0xa>;
+	};
+	qportal11: qman-portal@2c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x2c000 0x4000>, <0x100b000 0x1000>;
+		interrupts = <126 0x2 0 0>;
+		cell-index = <0xb>;
+	};
+	qportal12: qman-portal@30000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x30000 0x4000>, <0x100c000 0x1000>;
+		interrupts = <128 0x2 0 0>;
+		cell-index = <0xc>;
+	};
+	qportal13: qman-portal@34000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x34000 0x4000>, <0x100d000 0x1000>;
+		interrupts = <130 0x2 0 0>;
+		cell-index = <0xd>;
+	};
+	qportal14: qman-portal@38000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x38000 0x4000>, <0x100e000 0x1000>;
+		interrupts = <132 0x2 0 0>;
+		cell-index = <0xe>;
+	};
+	qportal15: qman-portal@3c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x3c000 0x4000>, <0x100f000 0x1000>;
+		interrupts = <134 0x2 0 0>;
+		cell-index = <0xf>;
+	};
+	qportal16: qman-portal@40000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x40000 0x4000>, <0x1010000 0x1000>;
+		interrupts = <136 0x2 0 0>;
+		cell-index = <0x10>;
+	};
+	qportal17: qman-portal@44000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x44000 0x4000>, <0x1011000 0x1000>;
+		interrupts = <138 0x2 0 0>;
+		cell-index = <0x11>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.7",
+				"fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,t2080-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000
+		       0x11000 0x1000
+		       0x12000 0x1000>;
+		interrupts = <16 2 1 27
+			      16 2 1 26
+			      16 2 1 25>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x3000>;
+		fsl,portid-mapping = <0x8000>;
+		ranges = <0 0x20000 0x3000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu1: pamu@1000 {
+			reg = <0x1000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu2: pamu@2000 {
+			reg = <0x2000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+	};
+
+/include/ "qoriq-mpic4.3.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,t2080-device-config", "fsl,qoriq-device-config-2.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		fsl,liodn-bits = <12>;
+	};
+
+/include/ "qoriq-clockgen2.dtsi"
+	global-utilities@e1000 {
+		compatible = "fsl,t2080-clockgen", "fsl,qoriq-clockgen-2.0";
+
+		mux0: mux0@0 {
+			#clock-cells = <0>;
+			reg = <0x0 4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
+			clock-names = "pll0", "pll0-div2", "pll0-div4",
+				"pll1", "pll1-div2", "pll1-div4";
+			clock-output-names = "cmux0";
+		};
+
+		mux1: mux1@20 {
+			#clock-cells = <0>;
+			reg = <0x20 4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
+			clock-names = "pll0", "pll0-div2", "pll0-div4",
+				"pll1", "pll1-div2", "pll1-div4";
+			clock-output-names = "cmux1";
+		};
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,t2080-rcpm", "fsl,qoriq-rcpm-2.0";
+		reg = <0xe2000 0x1000>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,t2080-sfp";
+		reg = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,t2080-serdes";
+		reg = <0xea000 0x4000>;
+	};
+
+/include/ "elo3-dma-0.dtsi"
+	dma@100300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+	};
+/include/ "elo3-dma-1.dtsi"
+	dma@101300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+	};
+/include/ "elo3-dma-2.dtsi"
+	dma@102300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x588>; /* DMA3LIODNR */
+	};
+
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		compatible = "fsl,t2080-esdhc", "fsl,esdhc";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x530>; /* SDMMCLIODNR */
+		sdhci,auto-cmd12;
+	};
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-gpio-1.dtsi"
+/include/ "qoriq-gpio-2.dtsi"
+/include/ "qoriq-gpio-3.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+	usb0: usb@210000 {
+		compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+		phy_type = "utmi";
+		port0;
+	};
+/include/ "qoriq-usb2-dr-0.dtsi"
+	usb1: usb@211000 {
+		compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x524>; /* USB1LIODNR */
+		dr_mode = "host";
+		phy_type = "utmi";
+	};
+/include/ "qoriq-sec5.2-0.dtsi"
+/include/ "qoriq-qman3.dtsi"
+/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman3-0.dtsi"
+/include/ "qoriq-fman3-0-1g-0.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+/include/ "qoriq-fman3-0-1g-4.dtsi"
+/include/ "qoriq-fman3-0-1g-5.dtsi"
+/include/ "qoriq-fman3-0-10g-0.dtsi"
+/include/ "qoriq-fman3-0-10g-1.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@ea000 {
+		};
+
+		enet6: ethernet@f0000 {
+		};
+
+		enet7: ethernet@f2000 {
+		};
+
+		mdio@fc000 {
+			interrupts = <100 1 0 0>;
+		};
+
+		mdio@fd000 {
+			interrupts = <101 1 0 0>;
+		};
+	};
+
+	L2_1: l2-cache-controller@c20000 {
+		/* Cluster 0 L2 cache */
+		compatible = "fsl,t2080-l2-cache-controller";
+		reg = <0xc20000 0x40000>;
+		next-level-cache = <&cpc>;
+	};
+};
diff --git a/src/powerpc/fsl/t208xqds.dtsi b/src/powerpc/fsl/t208xqds.dtsi
new file mode 100644
index 000000000000..ec080bd01b09
--- /dev/null
+++ b/src/powerpc/fsl/t208xqds.dtsi
@@ -0,0 +1,277 @@
+/*
+ * T2080/T2081 QDS Device Tree Source
+ *
+ * Copyright 2013 - 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	model = "fsl,T2080QDS";
+	compatible = "fsl,T2080QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		boardctrl: board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,fpga-qixis";
+			reg = <3 0 0x300>;
+			ranges = <0 3 0 0x300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,n25q128a11", "jedec,spi-nor"; /* 16MB */
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+			};
+
+			flash@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "sst,sst25wf040", "jedec,spi-nor";
+				reg = <1>;
+				spi-max-frequency = <35000000>;
+			};
+
+			flash@2 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "eon,en25s64", "jedec,spi-nor";
+				reg = <2>;
+				spi-max-frequency = <35000000>;
+			};
+		};
+
+		i2c@118000 {
+			pca9547@77 {
+				compatible = "nxp,pca9547";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					eeprom@50 {
+						compatible = "at24,24c512";
+						reg = <0x50>;
+					};
+
+					eeprom@51 {
+						compatible = "at24,24c02";
+						reg = <0x51>;
+					};
+
+					eeprom@57 {
+						compatible = "at24,24c02";
+						reg = <0x57>;
+					};
+
+					rtc@68 {
+						compatible = "dallas,ds3232";
+						reg = <0x68>;
+						interrupts = <0xb 0x1 0 0>;
+					};
+				};
+
+				i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+
+					eeprom@55 {
+						compatible = "at24,24c02";
+						reg = <0x55>;
+					};
+				};
+
+				i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+
+					ina220@40 {
+						compatible = "ti,ina220";
+						reg = <0x40>;
+						shunt-resistor = <1000>;
+					};
+
+					ina220@41 {
+						compatible = "ti,ina220";
+						reg = <0x41>;
+						shunt-resistor = <1000>;
+					};
+				};
+
+				i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+
+					adt7461@4c {
+						compatible = "adi,adt7461";
+						reg = <0x4c>;
+					};
+				};
+			};
+		};
+
+		sdhc@114000 {
+			voltage-ranges = <1800 1800 3300 3300>;
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe270000 {
+		reg = <0xf 0xfe270000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/t208xrdb.dtsi b/src/powerpc/fsl/t208xrdb.dtsi
new file mode 100644
index 000000000000..ff87e67c70da
--- /dev/null
+++ b/src/powerpc/fsl/t208xrdb.dtsi
@@ -0,0 +1,211 @@
+/*
+ * T2080PCIe-RDB Board Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	model = "fsl,T2080RDB";
+	compatible = "fsl,T2080RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		boardctrl: board-control@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,t2080-cpld";
+			reg = <3 0 0x300>;
+			ranges = <0 3 0 0x300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,n25q512ax3", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <10000000>; /* input clock */
+			};
+		};
+
+		i2c@118000 {
+			adt7481@4c {
+				compatible = "adi,adt7481";
+				reg = <0x4c>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c256";
+				reg = <0x50>;
+			};
+		};
+
+		i2c@118100 {
+			pca9546@77 {
+				compatible = "nxp,pca9546";
+				reg = <0x77>;
+			};
+		};
+
+		sdhc@114000 {
+			voltage-ranges = <1800 1800 3300 3300>;
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe270000 {
+		reg = <0xf 0xfe270000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/t208xsi-pre.dtsi b/src/powerpc/fsl/t208xsi-pre.dtsi
new file mode 100644
index 000000000000..c2e57203910d
--- /dev/null
+++ b/src/powerpc/fsl/t208xsi-pre.dtsi
@@ -0,0 +1,110 @@
+/*
+ * T2080/T2081 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e6500_power_isa.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+
+		crypto = &crypto;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
+
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		dma2 = &dma2;
+		sdhc = &sdhc;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e6500@0 {
+			device_type = "cpu";
+			reg = <0 1>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu1: PowerPC,e6500@2 {
+			device_type = "cpu";
+			reg = <2 3>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu2: PowerPC,e6500@4 {
+			device_type = "cpu";
+			reg = <4 5>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu3: PowerPC,e6500@6 {
+			device_type = "cpu";
+			reg = <6 7>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/t4240qds.dts b/src/powerpc/fsl/t4240qds.dts
new file mode 100644
index 000000000000..9573ceada07c
--- /dev/null
+++ b/src/powerpc/fsl/t4240qds.dts
@@ -0,0 +1,708 @@
+/*
+ * T4240QDS Device Tree Source
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t4240si-pre.dtsi"
+
+/ {
+	model = "fsl,T4240QDS";
+	compatible = "fsl,T4240QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases{
+		phy_rgmii1 = &phyrgmii1;
+		phy_rgmii2 = &phyrgmii2;
+		phy_sgmii3 = &phy3;
+		phy_sgmii4 = &phy4;
+		phy_sgmii11 = &phy11;
+		phy_sgmii12 = &phy12;
+		sgmii_phy11 = &sgmiiphy11;
+		sgmii_phy12 = &sgmiiphy12;
+		sgmii_phy13 = &sgmiiphy13;
+		sgmii_phy14 = &sgmiiphy14;
+		sgmii_phy21 = &sgmiiphy21;
+		sgmii_phy22 = &sgmiiphy22;
+		sgmii_phy23 = &sgmiiphy23;
+		sgmii_phy24 = &sgmiiphy24;
+		sgmii_phy31 = &sgmiiphy31;
+		sgmii_phy32 = &sgmiiphy32;
+		sgmii_phy33 = &sgmiiphy33;
+		sgmii_phy34 = &sgmiiphy34;
+		sgmii_phy41 = &sgmiiphy41;
+		sgmii_phy42 = &sgmiiphy42;
+		sgmii_phy43 = &sgmiiphy43;
+		sgmii_phy44 = &sgmiiphy44;
+		phy_xfi1 = &xfiphy1;
+		phy_xfi2 = &xfiphy2;
+		phy_xfi3 = &xfiphy3;
+		phy_xfi4 = &xfiphy4;
+		xfi_pcs_mdio1 = &xfimdio0;
+		xfi_pcs_mdio2 = &xfimdio1;
+		xfi_pcs_mdio3 = &xfimdio2;
+		xfi_pcs_mdio4 = &xfimdio3;
+		emi1_rgmii = &t4240mdio0;
+		emi1_slot1 = &t4240mdio1;
+		emi1_slot2 = &t4240mdio2;
+		emi1_slot3 = &t4240mdio3;
+		emi1_slot4 = &t4240mdio4;
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND DTB Image";
+			};
+
+			partition@200000 {
+				/* 10MB for Linux Kernel Image */
+				reg = <0x00200000 0x00A00000>;
+				label = "NAND Linux Kernel Image";
+			};
+
+			partition@C00000 {
+				/* 500MB for Root file System Image */
+				reg = <0x00c00000 0x1F400000>;
+				label = "NAND RFS Image";
+			};
+		};
+
+		board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,t4240qds-fpga", "fsl,fpga-qixis";
+			reg = <3 0 0x300>;
+			ranges = <0 3 0 0x300>;
+
+			mdio-mux-emi1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "mdio-mux-mmioreg", "mdio-mux";
+				mdio-parent-bus = <&mdio1>;
+				reg = <0x54 1>;
+				mux-mask = <0xe0>;
+
+				t4240mdio0: mdio@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					phyrgmii1: ethernet-phy@1 {
+						reg = <0x1>;
+					};
+
+					phyrgmii2: ethernet-phy@2 {
+						reg = <0x2>;
+					};
+				};
+
+				t4240mdio1: mdio@20 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x20>;
+					status = "disabled";
+
+					phy1: ethernet-phy@0 {
+						reg = <0x0>;
+					};
+
+					phy2: ethernet-phy@1 {
+						reg = <0x1>;
+					};
+
+					phy3: ethernet-phy@2 {
+						reg = <0x2>;
+					};
+
+					phy4: ethernet-phy@3 {
+						reg = <0x3>;
+					};
+
+					sgmiiphy11: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					sgmiiphy12: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					sgmiiphy13: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					sgmiiphy14: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+
+				t4240mdio2: mdio@40 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x40>;
+					status = "disabled";
+
+					phy5: ethernet-phy@4 {
+						reg = <0x4>;
+					};
+
+					phy6: ethernet-phy@5 {
+						reg = <0x5>;
+					};
+
+					phy7: ethernet-phy@6 {
+						reg = <0x6>;
+					};
+
+					phy8: ethernet-phy@7 {
+						reg = <0x7>;
+					};
+
+					sgmiiphy21: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					sgmiiphy22: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					sgmiiphy23: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					sgmiiphy24: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+
+				t4240mdio3: mdio@60 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x60>;
+					status = "disabled";
+
+					phy9: ethernet-phy@8 {
+						reg = <0x8>;
+					};
+
+					phy10: ethernet-phy@9 {
+						reg = <0x9>;
+					};
+
+					phy11: ethernet-phy@a {
+						reg = <0xa>;
+					};
+
+					phy12: ethernet-phy@b {
+						reg = <0xb>;
+					};
+
+					sgmiiphy31: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					sgmiiphy32: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					sgmiiphy33: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					sgmiiphy34: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+
+				t4240mdio4: mdio@80 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x80>;
+					status = "disabled";
+
+					phy13: ethernet-phy@c {
+						reg = <0xc>;
+					};
+
+					phy14: ethernet-phy@d {
+						reg = <0xd>;
+					};
+
+					phy15: ethernet-phy@e {
+						reg = <0xe>;
+					};
+
+					phy16: ethernet-phy@f {
+						reg = <0xf>;
+					};
+
+					sgmiiphy41: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					sgmiiphy42: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					sgmiiphy43: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					sgmiiphy44: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+			};
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "sst,sst25wf040", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+			};
+		};
+
+		i2c@118000 {
+			mux@77 {
+				compatible = "nxp,pca9547";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					eeprom@51 {
+						compatible = "at24,24c256";
+						reg = <0x51>;
+					};
+					eeprom@52 {
+						compatible = "at24,24c256";
+						reg = <0x52>;
+					};
+					eeprom@53 {
+						compatible = "at24,24c256";
+						reg = <0x53>;
+					};
+					eeprom@54 {
+						compatible = "at24,24c256";
+						reg = <0x54>;
+					};
+					eeprom@55 {
+						compatible = "at24,24c256";
+						reg = <0x55>;
+					};
+					eeprom@56 {
+						compatible = "at24,24c256";
+						reg = <0x56>;
+					};
+					rtc@68 {
+						compatible = "dallas,ds3232";
+						reg = <0x68>;
+						interrupts = <0x1 0x1 0 0>;
+					};
+				};
+
+				i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+
+					ina220@40 {
+						compatible = "ti,ina220";
+						reg = <0x40>;
+						shunt-resistor = <1000>;
+					};
+
+					ina220@41 {
+						compatible = "ti,ina220";
+						reg = <0x41>;
+						shunt-resistor = <1000>;
+					};
+
+					ina220@44 {
+						compatible = "ti,ina220";
+						reg = <0x44>;
+						shunt-resistor = <1000>;
+					};
+
+					ina220@45 {
+						compatible = "ti,ina220";
+						reg = <0x45>;
+						shunt-resistor = <1000>;
+					};
+
+					ina220@46 {
+						compatible = "ti,ina220";
+						reg = <0x46>;
+						shunt-resistor = <1000>;
+					};
+
+					ina220@47 {
+						compatible = "ti,ina220";
+						reg = <0x47>;
+						shunt-resistor = <1000>;
+					};
+				};
+			};
+		};
+
+		sdhc@114000 {
+			voltage-ranges = <1800 1800 3300 3300>;
+		};
+
+		fman@400000 {
+			port@83000 {
+				status = "disabled";
+			};
+
+			port@84000 {
+				status = "disabled";
+			};
+
+			port@85000 {
+				status = "disabled";
+			};
+
+			port@86000 {
+				status = "disabled";
+			};
+
+			port@87000 {
+				status = "disabled";
+			};
+
+			ethernet@e0000 {
+				phy-handle = <&phy5>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy6>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy7>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy8>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phyrgmii2>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@ea000 {
+				phy-handle = <&phy2>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&xauiphy1>;
+				phy-connection-type = "xgmii";
+			};
+
+			ethernet@f2000 {
+				phy-handle = <&xauiphy2>;
+				phy-connection-type = "xgmii";
+			};
+
+			xfimdio0: mdio@f1000 {
+				status = "disabled";
+
+				xfiphy1: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+				};
+			};
+
+			xfimdio1: mdio@f3000 {
+				status = "disabled";
+
+				xfiphy2: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+				};
+			};
+		};
+
+		fman@500000 {
+			port@84000 {
+				status = "disabled";
+			};
+
+			port@85000 {
+				status = "disabled";
+			};
+
+			port@86000 {
+				status = "disabled";
+			};
+
+			port@87000 {
+				status = "disabled";
+			};
+
+			ethernet@e0000 {
+				phy-handle = <&phy13>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy14>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy15>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy16>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phyrgmii1>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@ea000 {
+				phy-handle = <&phy10>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&xauiphy3>;
+				phy-connection-type = "xgmii";
+			};
+
+			ethernet@f2000 {
+				phy-handle = <&xauiphy4>;
+				phy-connection-type = "xgmii";
+			};
+
+			xfimdio2: mdio@f1000 {
+				status = "disabled";
+
+				xfiphy3: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+				};
+			};
+
+			xfimdio3: mdio@f3000 {
+				status = "disabled";
+
+				xfiphy4: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+				};
+			};
+
+			mdio@fd000 {
+				xauiphy1: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+				};
+
+				xauiphy2: ethernet-phy@1 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x1>;
+				};
+
+				xauiphy3: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x2>;
+				};
+
+				xauiphy4: ethernet-phy@3 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x3>;
+				};
+			};
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe270000 {
+		reg = <0xf 0xfe270000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+};
+
+/include/ "t4240si-post.dtsi"
diff --git a/src/powerpc/fsl/t4240rdb.dts b/src/powerpc/fsl/t4240rdb.dts
new file mode 100644
index 000000000000..8166c660712a
--- /dev/null
+++ b/src/powerpc/fsl/t4240rdb.dts
@@ -0,0 +1,364 @@
+/*
+ * T4240RDB Device Tree Source
+ *
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t4240si-pre.dtsi"
+
+/ {
+	model = "fsl,T4240RDB";
+	compatible = "fsl,T4240RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		sgmii_phy21 = &sgmiiphy21;
+		sgmii_phy22 = &sgmiiphy22;
+		sgmii_phy23 = &sgmiiphy23;
+		sgmii_phy24 = &sgmiiphy24;
+		sgmii_phy41 = &sgmiiphy41;
+		sgmii_phy42 = &sgmiiphy42;
+		sgmii_phy43 = &sgmiiphy43;
+		sgmii_phy44 = &sgmiiphy44;
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "sst,sst25wf040", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+			};
+		};
+
+		i2c@118000 {
+			hwmon@2f {
+				compatible = "winbond,w83793";
+				reg = <0x2f>;
+			};
+			eeprom@52 {
+				compatible = "at24,24c256";
+				reg = <0x52>;
+			};
+			eeprom@54 {
+				compatible = "at24,24c256";
+				reg = <0x54>;
+			};
+			eeprom@56 {
+				compatible = "at24,24c256";
+				reg = <0x56>;
+			};
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+		};
+
+		sdhc@114000 {
+			voltage-ranges = <1800 1800 3300 3300>;
+		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				phy-handle = <&sgmiiphy21>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&sgmiiphy22>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&sgmiiphy23>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&sgmiiphy24>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e8000 {
+				status = "disabled";
+			};
+
+			ethernet@ea000 {
+				status = "disabled";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&xfiphy1>;
+				phy-connection-type = "xgmii";
+			};
+
+			ethernet@f2000 {
+				phy-handle = <&xfiphy2>;
+				phy-connection-type = "xgmii";
+			};
+		};
+
+		fman@500000 {
+			ethernet@e0000 {
+				phy-handle = <&sgmiiphy41>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&sgmiiphy42>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&sgmiiphy43>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&sgmiiphy44>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e8000 {
+				status = "disabled";
+			};
+
+			ethernet@ea000 {
+				status = "disabled";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&xfiphy3>;
+				phy-connection-type = "xgmii";
+			};
+
+			ethernet@f2000 {
+				phy-handle = <&xfiphy4>;
+				phy-connection-type = "xgmii";
+			};
+
+			mdio@fc000 {
+				sgmiiphy21: ethernet-phy@0 {
+					reg = <0x0>;
+				};
+
+				sgmiiphy22: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+
+				sgmiiphy23: ethernet-phy@2 {
+					reg = <0x2>;
+				};
+
+				sgmiiphy24: ethernet-phy@3 {
+					reg = <0x3>;
+				};
+
+				sgmiiphy41: ethernet-phy@4 {
+					reg = <0x4>;
+				};
+
+				sgmiiphy42: ethernet-phy@5 {
+					reg = <0x5>;
+				};
+
+				sgmiiphy43: ethernet-phy@6 {
+					reg = <0x6>;
+				};
+
+				sgmiiphy44: ethernet-phy@7 {
+					reg = <0x7>;
+				};
+			};
+
+			mdio@fd000 {
+				xfiphy1: ethernet-phy@10 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x10>;
+				};
+
+				xfiphy2: ethernet-phy@11 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x11>;
+				};
+
+				xfiphy3: ethernet-phy@13 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x13>;
+				};
+
+				xfiphy4: ethernet-phy@12 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x12>;
+				};
+			};
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe270000 {
+		reg = <0xf 0xfe270000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+};
+
+/include/ "t4240si-post.dtsi"
diff --git a/src/powerpc/fsl/t4240si-post.dtsi b/src/powerpc/fsl/t4240si-post.dtsi
new file mode 100644
index 000000000000..68c4eadc19e3
--- /dev/null
+++ b/src/powerpc/fsl/t4240si-post.dtsi
@@ -0,0 +1,1172 @@
+/*
+ * T4240 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <25 2 0 0>;
+};
+
+/* controller at 0x240000 */
+&pci0 {
+	compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <20 2 0 0>;
+	pcie@0 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		reg = <0 0 0 0 0>;
+		interrupts = <20 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x250000 */
+&pci1 {
+	compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	interrupts = <21 2 0 0>;
+	pcie@0 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		reg = <0 0 0 0 0>;
+		interrupts = <21 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x260000 */
+&pci2 {
+	compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <22 2 0 0>;
+	pcie@0 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		reg = <0 0 0 0 0>;
+		interrupts = <22 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x270000 */
+&pci3 {
+	compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <23 2 0 0>;
+	pcie@0 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		reg = <0 0 0 0 0>;
+		interrupts = <23 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 43 1 0 0
+			0000 0 0 2 &mpic 0 1 0 0
+			0000 0 0 3 &mpic 4 1 0 0
+			0000 0 0 4 &mpic 8 1 0 0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <16 2 1 11>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,t4240-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0
+			      94 2 0 0
+			      95 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,t4240-dcsr-cnpc", "fsl,dcsr-cnpc";
+		reg = <0x1000 0x1000 0x1002000 0x10000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0x1A000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,t4240-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,t4240-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-ddr@13000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr2>;
+		reg = <0x13000 0x1000>;
+	};
+	dcsr-ddr@14000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr3>;
+		reg = <0x14000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,t4240-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,t4240-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,t4240-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x30000 0x1000 0x1022000 0x10000>;
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,t4240-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x31000 0x1000 0x1042000 0x10000>;
+	};
+	dcsr-snpc@32000 {
+		compatible = "fsl,t4240-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x32000 0x1000 0x1062000 0x10000>;
+	};
+	dcsr-cpu-sb-proxy@100000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x100000 0x1000 0x101000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@108000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x108000 0x1000 0x109000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@110000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x110000 0x1000 0x111000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@118000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x118000 0x1000 0x119000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@120000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu4>;
+		reg = <0x120000 0x1000 0x121000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@128000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu5>;
+		reg = <0x128000 0x1000 0x129000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@130000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu6>;
+		reg = <0x130000 0x1000 0x131000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@138000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu7>;
+		reg = <0x138000 0x1000 0x139000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@140000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu8>;
+		reg = <0x140000 0x1000 0x141000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@148000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu9>;
+		reg = <0x148000 0x1000 0x149000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@150000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu10>;
+		reg = <0x150000 0x1000 0x151000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@158000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu11>;
+		reg = <0x158000 0x1000 0x159000 0x1000>;
+	};
+};
+
+&bportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	bman-portal@0 {
+		compatible = "fsl,bman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <105 2 0 0>;
+	};
+	bman-portal@4000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <107 2 0 0>;
+	};
+	bman-portal@8000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <109 2 0 0>;
+	};
+	bman-portal@c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <111 2 0 0>;
+	};
+	bman-portal@10000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <113 2 0 0>;
+	};
+	bman-portal@14000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <115 2 0 0>;
+	};
+	bman-portal@18000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x18000 0x4000>, <0x1006000 0x1000>;
+		interrupts = <117 2 0 0>;
+	};
+	bman-portal@1c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
+		interrupts = <119 2 0 0>;
+	};
+	bman-portal@20000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x20000 0x4000>, <0x1008000 0x1000>;
+		interrupts = <121 2 0 0>;
+	};
+	bman-portal@24000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x24000 0x4000>, <0x1009000 0x1000>;
+		interrupts = <123 2 0 0>;
+	};
+	bman-portal@28000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x28000 0x4000>, <0x100a000 0x1000>;
+		interrupts = <125 2 0 0>;
+	};
+	bman-portal@2c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x2c000 0x4000>, <0x100b000 0x1000>;
+		interrupts = <127 2 0 0>;
+	};
+	bman-portal@30000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x30000 0x4000>, <0x100c000 0x1000>;
+		interrupts = <129 2 0 0>;
+	};
+	bman-portal@34000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x34000 0x4000>, <0x100d000 0x1000>;
+		interrupts = <131 2 0 0>;
+	};
+	bman-portal@38000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x38000 0x4000>, <0x100e000 0x1000>;
+		interrupts = <133 2 0 0>;
+	};
+	bman-portal@3c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x3c000 0x4000>, <0x100f000 0x1000>;
+		interrupts = <135 2 0 0>;
+	};
+	bman-portal@40000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x40000 0x4000>, <0x1010000 0x1000>;
+		interrupts = <137 2 0 0>;
+	};
+	bman-portal@44000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x44000 0x4000>, <0x1011000 0x1000>;
+		interrupts = <139 2 0 0>;
+	};
+	bman-portal@48000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x48000 0x4000>, <0x1012000 0x1000>;
+		interrupts = <141 2 0 0>;
+	};
+	bman-portal@4c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x4c000 0x4000>, <0x1013000 0x1000>;
+		interrupts = <143 2 0 0>;
+	};
+	bman-portal@50000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x50000 0x4000>, <0x1014000 0x1000>;
+		interrupts = <145 2 0 0>;
+	};
+	bman-portal@54000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x54000 0x4000>, <0x1015000 0x1000>;
+		interrupts = <147 2 0 0>;
+	};
+	bman-portal@58000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x58000 0x4000>, <0x1016000 0x1000>;
+		interrupts = <149 2 0 0>;
+	};
+	bman-portal@5c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x5c000 0x4000>, <0x1017000 0x1000>;
+		interrupts = <151 2 0 0>;
+	};
+	bman-portal@60000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x60000 0x4000>, <0x1018000 0x1000>;
+		interrupts = <153 2 0 0>;
+	};
+	bman-portal@64000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x64000 0x4000>, <0x1019000 0x1000>;
+		interrupts = <155 2 0 0>;
+	};
+	bman-portal@68000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x68000 0x4000>, <0x101a000 0x1000>;
+		interrupts = <157 2 0 0>;
+	};
+	bman-portal@6c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x6c000 0x4000>, <0x101b000 0x1000>;
+		interrupts = <159 2 0 0>;
+	};
+	bman-portal@70000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x70000 0x4000>, <0x101c000 0x1000>;
+		interrupts = <161 2 0 0>;
+	};
+	bman-portal@74000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x74000 0x4000>, <0x101d000 0x1000>;
+		interrupts = <163 2 0 0>;
+	};
+	bman-portal@78000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x78000 0x4000>, <0x101e000 0x1000>;
+		interrupts = <165 2 0 0>;
+	};
+	bman-portal@7c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x7c000 0x4000>, <0x101f000 0x1000>;
+		interrupts = <167 2 0 0>;
+	};
+	bman-portal@80000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x80000 0x4000>, <0x1020000 0x1000>;
+		interrupts = <169 2 0 0>;
+	};
+	bman-portal@84000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x84000 0x4000>, <0x1021000 0x1000>;
+		interrupts = <171 2 0 0>;
+	};
+	bman-portal@88000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x88000 0x4000>, <0x1022000 0x1000>;
+		interrupts = <173 2 0 0>;
+	};
+	bman-portal@8c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x8c000 0x4000>, <0x1023000 0x1000>;
+		interrupts = <175 2 0 0>;
+	};
+	bman-portal@90000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x90000 0x4000>, <0x1024000 0x1000>;
+		interrupts = <385 2 0 0>;
+	};
+	bman-portal@94000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x94000 0x4000>, <0x1025000 0x1000>;
+		interrupts = <387 2 0 0>;
+	};
+	bman-portal@98000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x98000 0x4000>, <0x1026000 0x1000>;
+		interrupts = <389 2 0 0>;
+	};
+	bman-portal@9c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x9c000 0x4000>, <0x1027000 0x1000>;
+		interrupts = <391 2 0 0>;
+	};
+	bman-portal@a0000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xa0000 0x4000>, <0x1028000 0x1000>;
+		interrupts = <393 2 0 0>;
+	};
+	bman-portal@a4000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xa4000 0x4000>, <0x1029000 0x1000>;
+		interrupts = <395 2 0 0>;
+	};
+	bman-portal@a8000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xa8000 0x4000>, <0x102a000 0x1000>;
+		interrupts = <397 2 0 0>;
+	};
+	bman-portal@ac000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xac000 0x4000>, <0x102b000 0x1000>;
+		interrupts = <399 2 0 0>;
+	};
+	bman-portal@b0000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xb0000 0x4000>, <0x102c000 0x1000>;
+		interrupts = <401 2 0 0>;
+	};
+	bman-portal@b4000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xb4000 0x4000>, <0x102d000 0x1000>;
+		interrupts = <403 2 0 0>;
+	};
+	bman-portal@b8000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xb8000 0x4000>, <0x102e000 0x1000>;
+		interrupts = <405 2 0 0>;
+	};
+	bman-portal@bc000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xbc000 0x4000>, <0x102f000 0x1000>;
+		interrupts = <407 2 0 0>;
+	};
+	bman-portal@c0000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xc0000 0x4000>, <0x1030000 0x1000>;
+		interrupts = <409 2 0 0>;
+	};
+	bman-portal@c4000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xc4000 0x4000>, <0x1031000 0x1000>;
+		interrupts = <411 2 0 0>;
+	};
+};
+
+&qportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <104 0x2 0 0>;
+		cell-index = <0x0>;
+	};
+	qportal1: qman-portal@4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <106 0x2 0 0>;
+		cell-index = <0x1>;
+	};
+	qportal2: qman-portal@8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <108 0x2 0 0>;
+		cell-index = <0x2>;
+	};
+	qportal3: qman-portal@c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <110 0x2 0 0>;
+		cell-index = <0x3>;
+	};
+	qportal4: qman-portal@10000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <112 0x2 0 0>;
+		cell-index = <0x4>;
+	};
+	qportal5: qman-portal@14000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <114 0x2 0 0>;
+		cell-index = <0x5>;
+	};
+	qportal6: qman-portal@18000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x18000 0x4000>, <0x1006000 0x1000>;
+		interrupts = <116 0x2 0 0>;
+		cell-index = <0x6>;
+	};
+	qportal7: qman-portal@1c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
+		interrupts = <118 0x2 0 0>;
+		cell-index = <0x7>;
+	};
+	qportal8: qman-portal@20000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x20000 0x4000>, <0x1008000 0x1000>;
+		interrupts = <120 0x2 0 0>;
+		cell-index = <0x8>;
+	};
+	qportal9: qman-portal@24000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x24000 0x4000>, <0x1009000 0x1000>;
+		interrupts = <122 0x2 0 0>;
+		cell-index = <0x9>;
+	};
+	qportal10: qman-portal@28000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x28000 0x4000>, <0x100a000 0x1000>;
+		interrupts = <124 0x2 0 0>;
+		cell-index = <0xa>;
+	};
+	qportal11: qman-portal@2c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x2c000 0x4000>, <0x100b000 0x1000>;
+		interrupts = <126 0x2 0 0>;
+		cell-index = <0xb>;
+	};
+	qportal12: qman-portal@30000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x30000 0x4000>, <0x100c000 0x1000>;
+		interrupts = <128 0x2 0 0>;
+		cell-index = <0xc>;
+	};
+	qportal13: qman-portal@34000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x34000 0x4000>, <0x100d000 0x1000>;
+		interrupts = <130 0x2 0 0>;
+		cell-index = <0xd>;
+	};
+	qportal14: qman-portal@38000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x38000 0x4000>, <0x100e000 0x1000>;
+		interrupts = <132 0x2 0 0>;
+		cell-index = <0xe>;
+	};
+	qportal15: qman-portal@3c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x3c000 0x4000>, <0x100f000 0x1000>;
+		interrupts = <134 0x2 0 0>;
+		cell-index = <0xf>;
+	};
+	qportal16: qman-portal@40000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x40000 0x4000>, <0x1010000 0x1000>;
+		interrupts = <136 0x2 0 0>;
+		cell-index = <0x10>;
+	};
+	qportal17: qman-portal@44000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x44000 0x4000>, <0x1011000 0x1000>;
+		interrupts = <138 0x2 0 0>;
+		cell-index = <0x11>;
+	};
+	qportal18: qman-portal@48000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x48000 0x4000>, <0x1012000 0x1000>;
+		interrupts = <140 0x2 0 0>;
+		cell-index = <0x12>;
+	};
+	qportal19: qman-portal@4c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4c000 0x4000>, <0x1013000 0x1000>;
+		interrupts = <142 0x2 0 0>;
+		cell-index = <0x13>;
+	};
+	qportal20: qman-portal@50000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x50000 0x4000>, <0x1014000 0x1000>;
+		interrupts = <144 0x2 0 0>;
+		cell-index = <0x14>;
+	};
+	qportal21: qman-portal@54000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x54000 0x4000>, <0x1015000 0x1000>;
+		interrupts = <146 0x2 0 0>;
+		cell-index = <0x15>;
+	};
+	qportal22: qman-portal@58000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x58000 0x4000>, <0x1016000 0x1000>;
+		interrupts = <148 0x2 0 0>;
+		cell-index = <0x16>;
+	};
+	qportal23: qman-portal@5c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x5c000 0x4000>, <0x1017000 0x1000>;
+		interrupts = <150 0x2 0 0>;
+		cell-index = <0x17>;
+	};
+	qportal24: qman-portal@60000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x60000 0x4000>, <0x1018000 0x1000>;
+		interrupts = <152 0x2 0 0>;
+		cell-index = <0x18>;
+	};
+	qportal25: qman-portal@64000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x64000 0x4000>, <0x1019000 0x1000>;
+		interrupts = <154 0x2 0 0>;
+		cell-index = <0x19>;
+	};
+	qportal26: qman-portal@68000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x68000 0x4000>, <0x101a000 0x1000>;
+		interrupts = <156 0x2 0 0>;
+		cell-index = <0x1a>;
+	};
+	qportal27: qman-portal@6c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x6c000 0x4000>, <0x101b000 0x1000>;
+		interrupts = <158 0x2 0 0>;
+		cell-index = <0x1b>;
+	};
+	qportal28: qman-portal@70000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x70000 0x4000>, <0x101c000 0x1000>;
+		interrupts = <160 0x2 0 0>;
+		cell-index = <0x1c>;
+	};
+	qportal29: qman-portal@74000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x74000 0x4000>, <0x101d000 0x1000>;
+		interrupts = <162 0x2 0 0>;
+		cell-index = <0x1d>;
+	};
+	qportal30: qman-portal@78000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x78000 0x4000>, <0x101e000 0x1000>;
+		interrupts = <164 0x2 0 0>;
+		cell-index = <0x1e>;
+	};
+	qportal31: qman-portal@7c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x7c000 0x4000>, <0x101f000 0x1000>;
+		interrupts = <166 0x2 0 0>;
+		cell-index = <0x1f>;
+	};
+	qportal32: qman-portal@80000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x80000 0x4000>, <0x1020000 0x1000>;
+		interrupts = <168 0x2 0 0>;
+		cell-index = <0x20>;
+	};
+	qportal33: qman-portal@84000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x84000 0x4000>, <0x1021000 0x1000>;
+		interrupts = <170 0x2 0 0>;
+		cell-index = <0x21>;
+	};
+	qportal34: qman-portal@88000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x88000 0x4000>, <0x1022000 0x1000>;
+		interrupts = <172 0x2 0 0>;
+		cell-index = <0x22>;
+	};
+	qportal35: qman-portal@8c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8c000 0x4000>, <0x1023000 0x1000>;
+		interrupts = <174 0x2 0 0>;
+		cell-index = <0x23>;
+	};
+	qportal36: qman-portal@90000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x90000 0x4000>, <0x1024000 0x1000>;
+		interrupts = <384 0x2 0 0>;
+		cell-index = <0x24>;
+	};
+	qportal37: qman-portal@94000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x94000 0x4000>, <0x1025000 0x1000>;
+		interrupts = <386 0x2 0 0>;
+		cell-index = <0x25>;
+	};
+	qportal38: qman-portal@98000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x98000 0x4000>, <0x1026000 0x1000>;
+		interrupts = <388 0x2 0 0>;
+		cell-index = <0x26>;
+	};
+	qportal39: qman-portal@9c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x9c000 0x4000>, <0x1027000 0x1000>;
+		interrupts = <390 0x2 0 0>;
+		cell-index = <0x27>;
+	};
+	qportal40: qman-portal@a0000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xa0000 0x4000>, <0x1028000 0x1000>;
+		interrupts = <392 0x2 0 0>;
+		cell-index = <0x28>;
+	};
+	qportal41: qman-portal@a4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xa4000 0x4000>, <0x1029000 0x1000>;
+		interrupts = <394 0x2 0 0>;
+		cell-index = <0x29>;
+	};
+	qportal42: qman-portal@a8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xa8000 0x4000>, <0x102a000 0x1000>;
+		interrupts = <396 0x2 0 0>;
+		cell-index = <0x2a>;
+	};
+	qportal43: qman-portal@ac000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xac000 0x4000>, <0x102b000 0x1000>;
+		interrupts = <398 0x2 0 0>;
+		cell-index = <0x2b>;
+	};
+	qportal44: qman-portal@b0000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xb0000 0x4000>, <0x102c000 0x1000>;
+		interrupts = <400 0x2 0 0>;
+		cell-index = <0x2c>;
+	};
+	qportal45: qman-portal@b4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xb4000 0x4000>, <0x102d000 0x1000>;
+		interrupts = <402 0x2 0 0>;
+		cell-index = <0x2d>;
+	};
+	qportal46: qman-portal@b8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xb8000 0x4000>, <0x102e000 0x1000>;
+		interrupts = <404 0x2 0 0>;
+		cell-index = <0x2e>;
+	};
+	qportal47: qman-portal@bc000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xbc000 0x4000>, <0x102f000 0x1000>;
+		interrupts = <406 0x2 0 0>;
+		cell-index = <0x2f>;
+	};
+	qportal48: qman-portal@c0000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc0000 0x4000>, <0x1030000 0x1000>;
+		interrupts = <408 0x2 0 0>;
+		cell-index = <0x30>;
+	};
+	qportal49: qman-portal@c4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc4000 0x4000>, <0x1031000 0x1000>;
+		interrupts = <410 0x2 0 0>;
+		cell-index = <0x31>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.7",
+				"fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	ddr2: memory-controller@9000 {
+		compatible = "fsl,qoriq-memory-controller-v4.7",
+				"fsl,qoriq-memory-controller";
+		reg = <0x9000 0x1000>;
+		interrupts = <16 2 1 22>;
+	};
+
+	ddr3: memory-controller@a000 {
+		compatible = "fsl,qoriq-memory-controller-v4.7",
+				"fsl,qoriq-memory-controller";
+		reg = <0xa000 0x1000>;
+		interrupts = <16 2 1 21>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,t4240-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000
+		       0x11000 0x1000
+		       0x12000 0x1000>;
+		interrupts = <16 2 1 27
+			      16 2 1 26
+			      16 2 1 25>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x6000>;
+		fsl,portid-mapping = <0x8000>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+	};
+
+/include/ "qoriq-mpic4.3.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,t4240-device-config", "fsl,qoriq-device-config-2.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		fsl,liodn-bits = <12>;
+	};
+
+/include/ "qoriq-clockgen2.dtsi"
+	global-utilities@e1000 {
+		compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0";
+
+		pll2: pll2@840 {
+			#clock-cells = <1>;
+			reg = <0x840 0x4>;
+			compatible = "fsl,qoriq-core-pll-2.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll2", "pll2-div2", "pll2-div4";
+		};
+
+		pll3: pll3@860 {
+			#clock-cells = <1>;
+			reg = <0x860 0x4>;
+			compatible = "fsl,qoriq-core-pll-2.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll3", "pll3-div2", "pll3-div4";
+		};
+
+		pll4: pll4@880 {
+			#clock-cells = <1>;
+			reg = <0x880 0x4>;
+			compatible = "fsl,qoriq-core-pll-2.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll4", "pll4-div2", "pll4-div4";
+		};
+
+		mux0: mux0@0 {
+			#clock-cells = <0>;
+			reg = <0x0 0x4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+				<&pll1 0>, <&pll1 1>, <&pll1 2>,
+				<&pll2 0>, <&pll2 1>, <&pll2 2>;
+			clock-names = "pll0", "pll0-div2", "pll0-div4",
+				"pll1", "pll1-div2", "pll1-div4",
+				"pll2", "pll2-div2", "pll2-div4";
+			clock-output-names = "cmux0";
+		};
+
+		mux1: mux1@20 {
+			#clock-cells = <0>;
+			reg = <0x20 0x4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+				<&pll1 0>, <&pll1 1>, <&pll1 2>,
+				<&pll2 0>, <&pll2 1>, <&pll2 2>;
+			clock-names = "pll0", "pll0-div2", "pll0-div4",
+				"pll1", "pll1-div2", "pll1-div4",
+				"pll2", "pll2-div2", "pll2-div4";
+			clock-output-names = "cmux1";
+		};
+
+		mux2: mux2@40 {
+			#clock-cells = <0>;
+			reg = <0x40 0x4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll3 0>, <&pll3 1>, <&pll3 2>,
+				<&pll4 0>, <&pll4 1>, <&pll4 2>;
+			clock-names = "pll3", "pll3-div2", "pll3-div4",
+				"pll4", "pll4-div2", "pll4-div4";
+			clock-output-names = "cmux2";
+		};
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0";
+		reg = <0xe2000 0x1000>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,t4240-sfp";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,t4240-serdes";
+		reg	   = <0xea000 0x4000>;
+	};
+
+/include/ "elo3-dma-0.dtsi"
+/include/ "elo3-dma-1.dtsi"
+/include/ "elo3-dma-2.dtsi"
+
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		compatible = "fsl,t4240-esdhc", "fsl,esdhc";
+		sdhci,auto-cmd12;
+	};
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-gpio-1.dtsi"
+/include/ "qoriq-gpio-2.dtsi"
+/include/ "qoriq-gpio-3.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+		usb0: usb@210000 {
+			compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
+			phy_type = "utmi";
+			port0;
+		};
+/include/ "qoriq-usb2-dr-0.dtsi"
+		usb1: usb@211000 {
+			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+			dr_mode = "host";
+			phy_type = "utmi";
+		};
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec5.0-0.dtsi"
+/include/ "qoriq-qman3.dtsi"
+/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman3-0.dtsi"
+/include/ "qoriq-fman3-0-1g-0.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+/include/ "qoriq-fman3-0-1g-4.dtsi"
+/include/ "qoriq-fman3-0-1g-5.dtsi"
+/include/ "qoriq-fman3-0-10g-0.dtsi"
+/include/ "qoriq-fman3-0-10g-1.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@ea000 {
+		};
+
+		enet6: ethernet@f0000 {
+		};
+
+		enet7: ethernet@f2000 {
+		};
+
+		mdio@fc000 {
+			status = "disabled";
+		};
+
+		mdio@fd000 {
+			status = "disabled";
+		};
+	};
+
+/include/ "qoriq-fman3-1.dtsi"
+/include/ "qoriq-fman3-1-1g-0.dtsi"
+/include/ "qoriq-fman3-1-1g-1.dtsi"
+/include/ "qoriq-fman3-1-1g-2.dtsi"
+/include/ "qoriq-fman3-1-1g-3.dtsi"
+/include/ "qoriq-fman3-1-1g-4.dtsi"
+/include/ "qoriq-fman3-1-1g-5.dtsi"
+/include/ "qoriq-fman3-1-10g-0.dtsi"
+/include/ "qoriq-fman3-1-10g-1.dtsi"
+	fman@500000 {
+		enet8: ethernet@e0000 {
+		};
+
+		enet9: ethernet@e2000 {
+		};
+
+		enet10: ethernet@e4000 {
+		};
+
+		enet11: ethernet@e6000 {
+		};
+
+		enet12: ethernet@e8000 {
+		};
+
+		enet13: ethernet@ea000 {
+		};
+
+		enet14: ethernet@f0000 {
+		};
+
+		enet15: ethernet@f2000 {
+		};
+
+		mdio@fc000 {
+			interrupts = <100 1 0 0>;
+		};
+
+		mdio@fd000 {
+			interrupts = <101 1 0 0>;
+		};
+	};
+
+	L2_1: l2-cache-controller@c20000 {
+		compatible = "fsl,t4240-l2-cache-controller";
+		reg = <0xc20000 0x40000>;
+		next-level-cache = <&cpc>;
+	};
+	L2_2: l2-cache-controller@c60000 {
+		compatible = "fsl,t4240-l2-cache-controller";
+		reg = <0xc60000 0x40000>;
+		next-level-cache = <&cpc>;
+	};
+	L2_3: l2-cache-controller@ca0000 {
+		compatible = "fsl,t4240-l2-cache-controller";
+		reg = <0xca0000 0x40000>;
+		next-level-cache = <&cpc>;
+	};
+};
diff --git a/src/powerpc/fsl/t4240si-pre.dtsi b/src/powerpc/fsl/t4240si-pre.dtsi
new file mode 100644
index 000000000000..038cf8fadee4
--- /dev/null
+++ b/src/powerpc/fsl/t4240si-pre.dtsi
@@ -0,0 +1,175 @@
+/*
+ * T4240 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e6500_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,T4240";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		crypto = &crypto;
+
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		dma2 = &dma2;
+		sdhc = &sdhc;
+
+		fman0 = &fman0;
+		fman1 = &fman1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
+		ethernet8 = &enet8;
+		ethernet9 = &enet9;
+		ethernet10 = &enet10;
+		ethernet11 = &enet11;
+		ethernet12 = &enet12;
+		ethernet13 = &enet13;
+		ethernet14 = &enet14;
+		ethernet15 = &enet15;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e6500@0 {
+			device_type = "cpu";
+			reg = <0 1>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu1: PowerPC,e6500@2 {
+			device_type = "cpu";
+			reg = <2 3>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu2: PowerPC,e6500@4 {
+			device_type = "cpu";
+			reg = <4 5>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu3: PowerPC,e6500@6 {
+			device_type = "cpu";
+			reg = <6 7>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu4: PowerPC,e6500@8 {
+			device_type = "cpu";
+			reg = <8 9>;
+			clocks = <&mux1>;
+			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x40000000>;
+		};
+		cpu5: PowerPC,e6500@10 {
+			device_type = "cpu";
+			reg = <10 11>;
+			clocks = <&mux1>;
+			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x40000000>;
+		};
+		cpu6: PowerPC,e6500@12 {
+			device_type = "cpu";
+			reg = <12 13>;
+			clocks = <&mux1>;
+			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x40000000>;
+		};
+		cpu7: PowerPC,e6500@14 {
+			device_type = "cpu";
+			reg = <14 15>;
+			clocks = <&mux1>;
+			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x40000000>;
+		};
+		cpu8: PowerPC,e6500@16 {
+			device_type = "cpu";
+			reg = <16 17>;
+			clocks = <&mux2>;
+			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x20000000>;
+		};
+		cpu9: PowerPC,e6500@18 {
+			device_type = "cpu";
+			reg = <18 19>;
+			clocks = <&mux2>;
+			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x20000000>;
+		};
+		cpu10: PowerPC,e6500@20 {
+			device_type = "cpu";
+			reg = <20 21>;
+			clocks = <&mux2>;
+			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x20000000>;
+		};
+		cpu11: PowerPC,e6500@22 {
+			device_type = "cpu";
+			reg = <22 23>;
+			clocks = <&mux2>;
+			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x20000000>;
+		};
+	};
+};
diff --git a/src/powerpc/gamecube.dts b/src/powerpc/gamecube.dts
new file mode 100644
index 000000000000..ef3be0e58b02
--- /dev/null
+++ b/src/powerpc/gamecube.dts
@@ -0,0 +1,114 @@
+/*
+ * arch/powerpc/boot/dts/gamecube.dts
+ *
+ * Nintendo GameCube platform device tree source
+ * Copyright (C) 2007-2009 The GameCube Linux Team
+ * Copyright (C) 2007,2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+/dts-v1/;
+
+/ {
+	model = "nintendo,gamecube";
+	compatible = "nintendo,gamecube";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		bootargs = "root=/dev/gcnsda2 rootwait udbg-immortal";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x01800000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,gekko@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <486000000>; /* 486MHz */
+			bus-frequency = <162000000>; /* 162MHz core-to-bus 3x */
+			timebase-frequency = <40500000>; /* 162MHz / 4 */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+		};
+	};
+
+	/* devices contained int the flipper chipset */
+	flipper {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "nintendo,flipper";
+		ranges = <0x0c000000 0x0c000000 0x00010000>;
+		interrupt-parent = <&PIC>;
+
+		video@0c002000 {
+			compatible = "nintendo,flipper-vi";
+			reg = <0x0c002000 0x100>;
+			interrupts = <8>;
+		};
+
+		processor-interface@0c003000 {
+			compatible = "nintendo,flipper-pi";
+			reg = <0x0c003000 0x100>;
+
+			PIC: pic {
+				#interrupt-cells = <1>;
+				compatible = "nintendo,flipper-pic";
+				interrupt-controller;
+			};
+		};
+
+		dsp@0c005000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "nintendo,flipper-dsp";
+			reg = <0x0c005000 0x200>;
+			interrupts = <6>;
+
+			memory@0 {
+				compatible = "nintendo,flipper-aram";
+				reg = <0 0x1000000>;	/* 16MB */
+			};
+		};
+
+		disk@0c006000 {
+			compatible = "nintendo,flipper-di";
+			reg = <0x0c006000 0x40>;
+			interrupts = <2>;
+		};
+
+		audio@0c006c00 {
+			compatible = "nintendo,flipper-ai";
+			reg = <0x0c006c00 0x20>;
+			interrupts = <6>;
+		};
+
+		gamepad-controller@0c006400 {
+			compatible = "nintendo,flipper-si";
+			reg = <0x0c006400 0x100>;
+			interrupts = <3>;
+		};
+
+		/* External Interface bus */
+		exi@0c006800 {
+			compatible = "nintendo,flipper-exi";
+			reg = <0x0c006800 0x40>;
+			virtual-reg = <0x0c006800>;
+			interrupts = <4>;
+		};
+        };
+};
+
diff --git a/src/powerpc/glacier.dts b/src/powerpc/glacier.dts
new file mode 100644
index 000000000000..a7a802f4ffdd
--- /dev/null
+++ b/src/powerpc/glacier.dts
@@ -0,0 +1,576 @@
+/*
+ * Device Tree Source for AMCC Glacier (460GT)
+ *
+ * Copyright 2008-2010 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,glacier";
+	compatible = "amcc,glacier";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		ethernet2 = &EMAC2;
+		ethernet3 = &EMAC3;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,460GT";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			next-level-cache = <&L2C0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-460gt";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-460gt";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-460gt", "ibm,l2-cache";
+		dcr-reg = <0x020 0x008		/* Internal SRAM DCR's */
+			   0x030 0x008>;	/* L2 cache DCR's */
+		cache-line-size = <32>;		/* 32 bytes */
+		cache-size = <262144>;		/* L2, 256K */
+		interrupt-parent = <&UIC1>;
+		interrupts = <11 1>;
+	};
+
+	plb {
+		compatible = "ibm,plb-460gt", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		CRYPTO: crypto@180000 {
+			compatible = "amcc,ppc460gt-crypto", "amcc,ppc460ex-crypto",
+				"amcc,ppc4xx-crypto";
+			reg = <4 0x00180000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x1d 0x4>;
+		};
+
+		HWRNG: hwrng@110000 {
+			compatible = "amcc,ppc460ex-rng", "ppc4xx-rng";
+			reg = <4 0x00110000 0x50>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <32>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x3 0x4
+					/*TXDE*/  0x4 0x4
+					/*RXDE*/  0x5 0x4>;
+			desc-base-addr-high = <0x8>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-460gt", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-460gt", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x6 0x4>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl512n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x04000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "ramdisk";
+						reg = <0x00200000 0x01400000>;
+					};
+					partition@1600000 {
+						label = "jffs2";
+						reg = <0x01600000 0x00400000>;
+					};
+					partition@1a00000 {
+						label = "user";
+						reg = <0x01a00000 0x02560000>;
+					};
+					partition@3f60000 {
+						label = "env";
+						reg = <0x03f60000 0x00040000>;
+					};
+					partition@3fa0000 {
+						label = "u-boot";
+						reg = <0x03fa0000 0x00060000>;
+					};
+				};
+
+				ndfc@3,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000003 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x00100000>;
+						};
+						partition@100000 {
+							label = "user";
+							reg = <0x00000000 0x03f00000>;
+						};
+					};
+				};
+			};
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1 0x4>;
+			};
+
+			UART1: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			UART2: serial@ef600500 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600500 0x00000008>;
+				virtual-reg = <0xef600500>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <28 0x4>;
+			};
+
+			UART3: serial@ef600600 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600600 0x00000008>;
+				virtual-reg = <0xef600600>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <29 0x4>;
+			};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-460gt", "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rtc@68 {
+					compatible = "st,m41t80";
+					reg = <0x68>;
+					interrupt-parent = <&UIC2>;
+					interrupts = <0x19 0x8>;
+				};
+				sttm@48 {
+					compatible = "ad,ad7414";
+					reg = <0x48>;
+					interrupt-parent = <&UIC1>;
+					interrupts = <0x14 0x8>;
+				};
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-460gt", "ibm,iic";
+				reg = <0xef600800 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-460gt", "ibm,zmii";
+				reg = <0xef600d00 0x0000000c>;
+			};
+
+			RGMII0: emac-rgmii@ef601500 {
+				compatible = "ibm,rgmii-460gt", "ibm,rgmii";
+				reg = <0xef601500 0x00000008>;
+				has-mdio;
+			};
+
+			RGMII1: emac-rgmii@ef601600 {
+				compatible = "ibm,rgmii-460gt", "ibm,rgmii";
+				reg = <0xef601600 0x00000008>;
+				has-mdio;
+			};
+
+			TAH0: emac-tah@ef601350 {
+				compatible = "ibm,tah-460gt", "ibm,tah";
+				reg = <0xef601350 0x00000030>;
+			};
+
+			TAH1: emac-tah@ef601450 {
+				compatible = "ibm,tah-460gt", "ibm,tah";
+				reg = <0xef601450 0x00000030>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
+				reg = <0xef600e00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
+				reg = <0xef600f00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <8>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				tah-device = <&TAH1>;
+				tah-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+
+			EMAC2: ethernet@ef601100 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC2>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
+						 /*Wake*/   0x1 &UIC2 0x16 0x4>;
+				reg = <0xef601100 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2>;
+				mal-rx-channel = <16>;
+				cell-index = <2>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>; /* emac2&3 only */
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII1>;
+				rgmii-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+
+			EMAC3: ethernet@ef601200 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC3>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x13 0x4
+						 /*Wake*/   0x1 &UIC2 0x17 0x4>;
+				reg = <0xef601200 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <3>;
+				mal-rx-channel = <24>;
+				cell-index = <3>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>; /* emac2&3 only */
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII1>;
+				rgmii-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+		};
+
+		PCIX0: pci@c0ec00000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pcix-460gt", "ibm,plb-pcix";
+			primary;
+			large-inbound-windows;
+			enable-msi-hole;
+			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
+			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 0 to 0x3f */
+			bus-range = <0x0 0x3f>;
+
+			/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
+		};
+
+		PCIE0: pciex@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08010000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 40 to 0x7f */
+			bus-range = <0x40 0x7f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pciex@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08011000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 80 to 0xbf */
+			bus-range = <0x80 0xbf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
+		};
+	};
+};
diff --git a/src/powerpc/haleakala.dts b/src/powerpc/haleakala.dts
new file mode 100644
index 000000000000..2b256694eca6
--- /dev/null
+++ b/src/powerpc/haleakala.dts
@@ -0,0 +1,281 @@
+/*
+ * Device Tree Source for AMCC Haleakala (405EXr)
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "amcc,haleakala";
+	compatible = "amcc,haleakala", "amcc,kilauea";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,405EXr";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>; /* 16 kB */
+			d-cache-size = <16384>; /* 16 kB */
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller {
+		compatible = "ibm,uic-405exr", "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-405exr","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-405exr","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	plb {
+		compatible = "ibm,plb-405exr", "ibm,plb4";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: memory-controller {
+			compatible = "ibm,sdram-405exr", "ibm,sdram-4xx-ddr2";
+			dcr-reg = <0x010 0x002>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x5 0x4	/* ECC DED Error */ 
+				      0x6 0x4>;	/* ECC SEC Error */ 
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-405exr", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-405exr", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x80000000 0x80000000 0x10000000
+				  0xef600000 0xef600000 0x00a00000
+				  0xf0000000 0xf0000000 0x10000000>;
+			dcr-reg = <0x0a0 0x005>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-405exr", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x5 0x1>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl512n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x04000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x00200000>;
+					};
+					partition@200000 {
+						label = "root";
+						reg = <0x00200000 0x00200000>;
+					};
+					partition@400000 {
+						label = "user";
+						reg = <0x00400000 0x03b60000>;
+					};
+					partition@3f60000 {
+						label = "env";
+						reg = <0x03f60000 0x00040000>;
+					};
+					partition@3fa0000 {
+						label = "u-boot";
+						reg = <0x03fa0000 0x00060000>;
+					};
+				};
+			};
+
+			UART0: serial@ef600200 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600200 0x00000008>;
+				virtual-reg = <0xef600200>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1a 0x4>;
+			};
+
+			UART1: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@ef600400 {
+				compatible = "ibm,iic-405exr", "ibm,iic";
+				reg = <0xef600400 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+
+			IIC1: i2c@ef600500 {
+				compatible = "ibm,iic-405exr", "ibm,iic";
+				reg = <0xef600500 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x7 0x4>;
+			};
+
+
+			RGMII0: emac-rgmii@ef600b00 {
+				compatible = "ibm,rgmii-405exr", "ibm,rgmii";
+				reg = <0xef600b00 0x00000104>;
+				has-mdio;
+			};
+
+			EMAC0: ethernet@ef600900 {
+				linux,network-index = <0x0>;
+				device_type = "network";
+				compatible = "ibm,emac-405exr", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600900 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+		};
+
+		PCIE0: pciex@0a0000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0xa0000000 0x20000000	/* Config space access */
+			       0xef000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x040 0x020>;
+			sdr-base = <0x400>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 0x00 to 0x3f */
+			bus-range = <0x0 0x3f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
+		};
+	};
+};
diff --git a/src/powerpc/holly.dts b/src/powerpc/holly.dts
new file mode 100644
index 000000000000..43e6f0c8e449
--- /dev/null
+++ b/src/powerpc/holly.dts
@@ -0,0 +1,196 @@
+/*
+ * Device Tree Source for IBM Holly (PPC 750CL with TSI controller)
+ * Copyright 2007, IBM Corporation
+ *
+ * Stephen Winiecki <stevewin@us.ibm.com>
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "41K7339";
+	compatible = "ibm,holly";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells =<0>;
+		PowerPC,750CL@0 {
+			device_type = "cpu";
+			reg = <0x00000000>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			d-cache-sets = <128>;
+			i-cache-sets = <128>;
+			timebase-frequency = <50000000>;
+			clock-frequency = <600000000>;
+			bus-frequency = <200000000>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+  	tsi109@c0000000 {
+		device_type = "tsi-bridge";
+		compatible = "tsi109-bridge", "tsi108-bridge";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0xc0000000 0x00010000>;
+		reg = <0xc0000000 0x00010000>;
+
+		i2c@7000 {
+			device_type = "i2c";
+			compatible  = "tsi109-i2c", "tsi108-i2c";
+			interrupt-parent = <&MPIC>;
+			interrupts = <0xe 0x2>;
+			reg = <0x00007000 0x00000400>;
+		};
+
+		MDIO: mdio@6000 {
+			compatible = "tsi109-mdio", "tsi108-mdio";
+			reg = <0x00006000 0x00000050>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			PHY1: ethernet-phy@1 {
+				compatible = "bcm5461a";
+				reg = <0x00000001>;
+				txc-rxc-delay-disable;
+			};
+
+			PHY2: ethernet-phy@2 {
+				compatible = "bcm5461a";
+				reg = <0x00000002>;
+				txc-rxc-delay-disable;
+			};
+		};
+
+		ethernet@6200 {
+			device_type = "network";
+			compatible = "tsi109-ethernet", "tsi108-ethernet";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x00006000 0x00000200>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&MPIC>;
+			interrupts = <0x10 0x2>;
+			mdio-handle = <&MDIO>;
+			phy-handle = <&PHY1>;
+		};
+
+		ethernet@6600 {
+			device_type = "network";
+			compatible = "tsi109-ethernet", "tsi108-ethernet";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x00006400 0x00000200>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&MPIC>;
+			interrupts = <0x11 0x2>;
+			mdio-handle = <&MDIO>;
+			phy-handle = <&PHY2>;
+		};
+
+		serial@7808 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x00007808 0x00000200>;
+			virtual-reg = <0xc0007808>;
+			clock-frequency = <1067212800>;
+			current-speed = <115200>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <0xc 0x2>;
+		};
+
+		serial@7c08 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x00007c08 0x00000200>;
+			virtual-reg = <0xc0007c08>;
+			clock-frequency = <1067212800>;
+			current-speed = <115200>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <0xd 0x2>;
+		};
+
+	  	MPIC: pic@7400 {
+			device_type = "open-pic";
+			compatible = "chrp,open-pic";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x00007400 0x00000400>;
+			big-endian;
+		};
+	};
+
+	pci@c0001000 {
+		device_type = "pci";
+		compatible = "tsi109-pci", "tsi108-pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xc0001000 0x00001000>;
+		bus-range = <0x0 0x0>;
+		/*----------------------------------------------------+
+		| PCI memory range.
+		| 01 denotes I/O space
+		| 02 denotes 32-bit memory space
+		+----------------------------------------------------*/
+		ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000
+			  0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>;
+		clock-frequency = <133333332>;
+		interrupt-parent = <&MPIC>;
+		interrupts = <0x17 0x2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		/*----------------------------------------------------+
+		| The INTA, INTB, INTC, INTD are shared.
+		+----------------------------------------------------*/
+		interrupt-map = <
+			0x800 0x0 0x0 0x1 &RT0 0x24 0x0
+			0x800 0x0 0x0 0x2 &RT0 0x25 0x0
+			0x800 0x0 0x0 0x3 &RT0 0x26 0x0
+			0x800 0x0 0x0 0x4 &RT0 0x27 0x0
+
+			0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
+			0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
+			0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
+			0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
+
+			0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
+			0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
+			0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
+			0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
+
+			0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
+			0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
+			0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
+			0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
+			>;
+
+		RT0: router@1180 {
+			device_type = "pic-router";
+			interrupt-controller;
+			big-endian;
+			clock-frequency = <0>;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			interrupts = <0x17 0x2>;
+			interrupt-parent = <&MPIC>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/tsi109@c0000000/serial@7808";
+	};
+};
diff --git a/src/powerpc/hotfoot.dts b/src/powerpc/hotfoot.dts
new file mode 100644
index 000000000000..71d3bb4931dc
--- /dev/null
+++ b/src/powerpc/hotfoot.dts
@@ -0,0 +1,296 @@
+/*
+ * Device Tree Source for ESTeem 195E Hotfoot
+ *
+ * Copyright 2009 AbsoluteValue Systems <solomon@linux-wlan.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "est,hotfoot";
+	compatible = "est,hotfoot";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,405EP";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <0x20>;
+			d-cache-line-size = <0x20>;
+			i-cache-size = <0x4000>;
+			d-cache-size = <0x4000>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	plb {
+		compatible = "ibm,plb3";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: memory-controller {
+			compatible = "ibm,sdram-405ep";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL: mcmal {
+			compatible = "ibm,mcmal-405ep", "ibm,mcmal";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <
+				0xb 0x4 /* TXEOB */
+				0xc 0x4 /* RXEOB */
+				0xa 0x4 /* SERR */
+				0xd 0x4 /* TXDE */
+				0xe 0x4 /* RXDE */>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-405ep", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xef600000 0xef600000 0x00a00000>;
+			dcr-reg = <0x0a0 0x005>;
+			clock-frequency = <0>; /* Filled in by zImage */
+
+			/* Hotfoot has UART0/UART1 swapped */
+
+			UART0: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				current-speed = <0x9600>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			UART1: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				current-speed = <0x9600>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			IIC: i2c@ef600500 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "ibm,iic-405ep", "ibm,iic";
+				reg = <0xef600500 0x00000011>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+
+				rtc@68 {
+					/* Actually a DS1339 */
+					compatible = "dallas,ds1307";
+					reg = <0x68>;
+				};
+
+				temp@4a {
+					/* Not present on all boards */
+					compatible = "national,lm75";
+					reg = <0x4a>;
+				};
+			};
+
+			GPIO: gpio@ef600700 {
+				#gpio-cells = <2>;
+				compatible = "ibm,ppc4xx-gpio";
+				reg = <0xef600700 0x00000020>;
+				gpio-controller;
+			};
+
+			gpio-leds {
+				compatible = "gpio-leds";
+				status {
+					label = "Status";
+					gpios = <&GPIO 1 0>;
+				};
+				radiorx {
+					label = "Rx";
+					gpios = <&GPIO 0xe 0>;
+				};
+			};
+
+			EMAC0: ethernet@ef600800 {
+				linux,network-index = <0x0>;
+				device_type = "network";
+				compatible = "ibm,emac-405ep", "ibm,emac";
+				interrupt-parent = <&UIC0>;
+				interrupts = <
+					0xf 0x4 /* Ethernet */
+					0x9 0x4 /* Ethernet Wake Up */>;
+				local-mac-address = [000000000000]; /* Filled in by zImage */
+				reg = <0xef600800 0x00000070>;
+				mal-device = <&MAL>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+				phy-mode = "mii";
+				phy-map = <0x00000000>;
+			};
+
+			EMAC1: ethernet@ef600900 {
+				linux,network-index = <0x1>;
+				device_type = "network";
+				compatible = "ibm,emac-405ep", "ibm,emac";
+				interrupt-parent = <&UIC0>;
+				interrupts = <
+					0x11 0x4 /* Ethernet */
+					0x9 0x4 /* Ethernet Wake Up */>;
+				local-mac-address = [000000000000]; /* Filled in by zImage */
+				reg = <0xef600900 0x00000070>;
+				mal-device = <&MAL>;
+				mal-tx-channel = <2>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+				mdio-device = <&EMAC0>;
+				phy-mode = "mii";
+				phy-map = <0x0000001>;
+			};
+		};
+
+		EBC0: ebc {
+			compatible = "ibm,ebc-405ep", "ibm,ebc";
+			dcr-reg = <0x012 0x002>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+
+			/* The ranges property is supplied by the bootwrapper
+			 * and is based on the firmware's configuration of the
+			 * EBC bridge
+			 */
+			clock-frequency = <0>; /* Filled in by zImage */
+
+			nor_flash@0 {
+				compatible = "cfi-flash";
+				bank-width = <2>;
+				reg = <0x0 0xff800000 0x00800000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/* This mapping is for the 8M flash
+				   4M flash has all ofssets -= 4M,
+				   and FeatFS partition is not present */
+				partition@0 {
+					label = "Bootloader";
+					reg = <0x7c0000 0x40000>;
+					/* read-only; */
+				};
+				partition@1 {
+					label = "Env_and_Config_Primary";
+					reg = <0x400000 0x10000>;
+				};
+				partition@2 {
+					label = "Kernel";
+					reg = <0x420000 0x100000>;
+				};
+				partition@3 {
+					label = "Filesystem";
+					reg = <0x520000 0x2a0000>;
+				};
+				partition@4 {
+					label = "Env_and_Config_Secondary";
+					reg = <0x410000 0x10000>;
+				};
+				partition@5 {
+					label = "FeatFS";
+					reg = <0x000000 0x400000>;
+				};
+				partition@6 {
+					label = "Bootloader_Env";
+					reg = <0x7d0000 0x10000>;
+				};
+			};
+		};
+
+		PCI0: pci@ec000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb405ep-pci", "ibm,plb-pci";
+			primary;
+			reg = <0xeec00000 0x00000008    /* Config space access */
+				0xeed80000 0x00000004    /* IACK */
+				0xeed80000 0x00000004    /* Special cycle */
+				0xef480000 0x00000040>;  /* Internal registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed. Chip supports a second
+			 * IO range but we don't use it for now
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
+				0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
+
+			interrupt-parent = <&UIC0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+				/* IDSEL 3 -- slot1 (optional) 27/29 A/B IRQ2/4 */
+				0x1800 0x0 0x0 0x1 &UIC0 0x1b 0x8
+				0x1800 0x0 0x0 0x2 &UIC0 0x1d 0x8
+
+				/* IDSEL 4 -- slot0, 26/28 A/B IRQ1/3 */
+				0x2000 0x0 0x0 0x1 &UIC0 0x1a 0x8
+				0x2000 0x0 0x0 0x2 &UIC0 0x1c 0x8
+				>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = &UART0;
+	};
+};
diff --git a/src/powerpc/icon.dts b/src/powerpc/icon.dts
new file mode 100644
index 000000000000..9c94fd737f7c
--- /dev/null
+++ b/src/powerpc/icon.dts
@@ -0,0 +1,447 @@
+/*
+ * Device Tree Source for Mosaix Technologies, Inc. ICON board
+ *
+ * Copyright 2010 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "mosaixtech,icon";
+	compatible = "mosaixtech,icon";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440SPe";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			reset-type = <2>;	/* Use chip-reset */
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440spe";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440spe";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	MQ0: mq {
+		compatible = "ibm,mq-440spe";
+		dcr-reg = <0x040 0x020>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		/*        addr-child     addr-parent    size */
+		ranges = <0x4 0x00100000 0x4 0x00100000 0x00001000
+			  0x4 0x00200000 0x4 0x00200000 0x00000400
+			  0x4 0xe0000000 0x4 0xe0000000 0x20000000
+			  0xc 0x00000000 0xc 0x00000000 0x20000000
+			  0xd 0x00000000 0xd 0x00000000 0x80000000
+			  0xd 0x80000000 0xd 0x80000000 0x80000000
+			  0xe 0x00000000 0xe 0x00000000 0x80000000
+			  0xe 0x80000000 0xe 0x80000000 0x80000000
+			  0xf 0x00000000 0xf 0x00000000 0x80000000
+			  0xf 0x80000000 0xf 0x80000000 0x80000000>;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <1>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4
+					 /*RXEOB*/ 0x1 &UIC1 0x7 0x4
+					 /*SERR*/  0x2 &UIC1 0x1 0x4
+					 /*TXDE*/  0x3 &UIC1 0x2 0x4
+					 /*RXDE*/  0x4 &UIC1 0x3 0x4>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x5 0x1>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x01000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "root";
+						reg = <0x00200000 0x00200000>;
+					};
+					partition@400000 {
+						label = "user";
+						reg = <0x00400000 0x00b60000>;
+					};
+					partition@f60000 {
+						label = "env";
+						reg = <0x00f60000 0x00040000>;
+					};
+					partition@fa0000 {
+						label = "u-boot";
+						reg = <0x00fa0000 0x00060000>;
+					};
+				};
+
+				SysACE_CompactFlash: sysace@1,0 {
+					compatible = "xlnx,sysace";
+					interrupt-parent = <&UIC2>;
+					interrupts = <24 0x4>;
+					reg = <0x00000001 0x00000000 0x10000>;
+				};
+			};
+
+			UART0: serial@f0000200 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000200 0x00000008>;
+				virtual-reg = <0xa0000200>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <115200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			UART1: serial@f0000300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000300 0x00000008>;
+				virtual-reg = <0xa0000300>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+
+			UART2: serial@f0000600 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000600 0x00000008>;
+				virtual-reg = <0xa0000600>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x5 0x4>;
+			};
+
+			IIC0: i2c@f0000400 {
+				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xf0000400 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+
+			IIC1: i2c@f0000500 {
+				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xf0000500 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+                                rtc@68 {
+                                        compatible = "st,m41t00";
+                                        reg = <0x68>;
+                                };
+			};
+
+			EMAC0: ethernet@f0000800 {
+				linux,network-index = <0x0>;
+				device_type = "network";
+				compatible = "ibm,emac-440spe", "ibm,emac4";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xf0000800 0x00000074>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "gmii";
+				phy-map = <0x00000000>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+		};
+
+		PCIX0: pci@c0ec00000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix";
+			primary;
+			large-inbound-windows;
+			enable-msi-hole;
+			reg = <0x0000000c 0x0ec00000 0x00000008   /* Config space access */
+			       0x00000000 0x00000000 0x00000000   /* no IACK cycles */
+			       0x0000000c 0x0ed00000 0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100   /* Internal registers */
+			       0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* PCI-X interrupt (SM502) is routed to extIRQ10 (UIC1, 19) */
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = <0x0 0x0 0x0 0x0 &UIC1 19 0x8>;
+		};
+
+		PCIE0: pciex@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0x10 to 0x1f */
+			bus-range = <0x10 0x1f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pciex@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0x20 to 0x2f */
+			bus-range = <0x20 0x2f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
+		};
+
+		I2O: i2o@400100000 {
+			compatible = "ibm,i2o-440spe";
+			reg = <0x00000004 0x00100000 0x100>;
+			dcr-reg = <0x060 0x020>;
+		};
+
+		DMA0: dma0@400100100 {
+			compatible = "ibm,dma-440spe";
+			cell-index = <0>;
+			reg = <0x00000004 0x00100100 0x100>;
+			dcr-reg = <0x060 0x020>;
+			interrupt-parent = <&DMA0>;
+			interrupts = <0 1>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <
+				0 &UIC0 0x14 4
+				1 &UIC1 0x16 4>;
+		};
+
+		DMA1: dma1@400100200 {
+			compatible = "ibm,dma-440spe";
+			cell-index = <1>;
+			reg = <0x00000004 0x00100200 0x100>;
+			dcr-reg = <0x060 0x020>;
+			interrupt-parent = <&DMA1>;
+			interrupts = <0 1>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <
+				0 &UIC0 0x16 4
+				1 &UIC1 0x16 4>;
+		};
+
+		xor-accel@400200000 {
+			compatible = "amcc,xor-accelerator";
+			reg = <0x00000004 0x00200000 0x400>;
+			interrupt-parent = <&UIC1>;
+			interrupts = <0x1f 4>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@f0000200";
+	};
+};
diff --git a/src/powerpc/iss4xx-mpic.dts b/src/powerpc/iss4xx-mpic.dts
new file mode 100644
index 000000000000..23e9d9b7e400
--- /dev/null
+++ b/src/powerpc/iss4xx-mpic.dts
@@ -0,0 +1,155 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright 2010 Torez Smith, IBM Corporation.
+ *
+ * Based on earlier code:
+ *     Copyright (c) 2006, 2007 IBM Corp.
+ *     Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x01f00000 0x00100000;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "ibm,iss-4xx";
+	compatible = "ibm,iss-4xx";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,4xx"; // real CPU changed in sim
+			reg = <0>;
+			clock-frequency = <100000000>; // 100Mhz :-)
+			timebase-frequency = <100000000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "ok";
+		};
+		cpu@1 {
+			device_type = "cpu";
+			model = "PowerPC,4xx"; // real CPU changed in sim
+			reg = <1>;
+			clock-frequency = <100000000>; // 100Mhz :-)
+			timebase-frequency = <100000000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "disabled";
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0x01f00100>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			model = "PowerPC,4xx"; // real CPU changed in sim
+			reg = <2>;
+			clock-frequency = <100000000>; // 100Mhz :-)
+			timebase-frequency = <100000000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "disabled";
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0x01f00200>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			model = "PowerPC,4xx"; // real CPU changed in sim
+			reg = <3>;
+			clock-frequency = <100000000>; // 100Mhz :-)
+			timebase-frequency = <100000000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "disabled";
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0x01f00300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg =  <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
+
+	};
+
+	MPIC: interrupt-controller {
+		compatible = "chrp,open-pic";
+		interrupt-controller;
+		dcr-reg = <0xffc00000 0x00030000>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+	};
+
+	plb {
+		compatible = "ibm,plb-4xx", "ibm,plb4"; /* Could be PLB6, doesn't matter */
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; // Filled in by zImage
+
+		POB0: opb {
+			compatible = "ibm,opb-4xx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Wish there was a nicer way of specifying a full 32-bit
+			   range */
+			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+				  0x80000000 0x00000001 0x80000000 0x80000000>;
+			clock-frequency = <0>; // Filled in by zImage
+			UART0: serial@40000200 {
+				device_type = "serial";
+				compatible = "ns16550a";
+				reg = <0x40000200 0x00000008>;
+				virtual-reg = <0xe0000200>;
+				clock-frequency = <11059200>;
+				current-speed = <115200>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <0x0 0x2>;
+			};
+		};
+	};
+
+	nvrtc {
+		compatible = "ds1743-nvram", "ds1743", "rtc-ds1743";
+		reg = <0 0xEF703000 0x2000>;
+	};
+	iss-block {
+		compatible = "ibm,iss-sim-block-device";
+		reg = <0 0xEF701000 0x1000>;
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@40000200";
+	};
+};
diff --git a/src/powerpc/iss4xx.dts b/src/powerpc/iss4xx.dts
new file mode 100644
index 000000000000..4ff6555c866d
--- /dev/null
+++ b/src/powerpc/iss4xx.dts
@@ -0,0 +1,116 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright 2010 Torez Smith, IBM Corporation.
+ *
+ * Based on earlier code:
+ *    Copyright (c) 2006, 2007 IBM Corp.
+ *    Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "ibm,iss-4xx";
+	compatible = "ibm,iss-4xx";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,4xx"; // real CPU changed in sim
+			reg = <0x00000000>;
+			clock-frequency = <100000000>; // 100Mhz :-)
+			timebase-frequency = <100000000>;
+			i-cache-line-size = <32>; // may need fixup in sim
+			d-cache-line-size = <32>; // may need fixup in sim
+			i-cache-size = <32768>; /* may need fixup in sim */
+			d-cache-size = <32768>; /* may need fixup in sim */
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-4xx", "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-4xx", "ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	plb {
+		compatible = "ibm,plb-4xx", "ibm,plb4"; /* Could be PLB6, doesn't matter */
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; // Filled in by zImage
+
+		POB0: opb {
+			compatible = "ibm,opb-4xx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Wish there was a nicer way of specifying a full 32-bit
+			   range */
+			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+				  0x80000000 0x00000001 0x80000000 0x80000000>;
+			clock-frequency = <0>; // Filled in by zImage
+			UART0: serial@40000200 {
+				device_type = "serial";
+				compatible = "ns16550a";
+				reg = <0x40000200 0x00000008>;
+				virtual-reg = <0xe0000200>;
+				clock-frequency = <11059200>;
+				current-speed = <115200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+		};
+	};
+
+	nvrtc {
+		compatible = "ds1743-nvram", "ds1743", "rtc-ds1743";
+		reg = <0 0xEF703000 0x2000>;
+	};
+	iss-block {
+		compatible = "ibm,iss-sim-block-device";
+		reg = <0 0xEF701000 0x1000>;
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@40000200";
+	};
+};
diff --git a/src/powerpc/katmai.dts b/src/powerpc/katmai.dts
new file mode 100644
index 000000000000..f913dbe25d35
--- /dev/null
+++ b/src/powerpc/katmai.dts
@@ -0,0 +1,510 @@
+/*
+ * Device Tree Source for AMCC Katmai eval board
+ *
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "amcc,katmai";
+	compatible = "amcc,katmai";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440SPe";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			reset-type = <2>;	/* Use chip-reset */
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440spe";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440spe";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	MQ0: mq {
+		compatible = "ibm,mq-440spe";
+		dcr-reg = <0x040 0x020>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		/*        addr-child     addr-parent    size */
+		ranges = <0x4 0x00100000 0x4 0x00100000 0x00001000
+			  0x4 0x00200000 0x4 0x00200000 0x00000400
+			  0x4 0xe0000000 0x4 0xe0000000 0x20000000
+			  0xc 0x00000000 0xc 0x00000000 0x20000000
+			  0xd 0x00000000 0xd 0x00000000 0x80000000
+			  0xd 0x80000000 0xd 0x80000000 0x80000000
+			  0xe 0x00000000 0xe 0x00000000 0x80000000
+			  0xe 0x80000000 0xe 0x80000000 0x80000000
+			  0xf 0x00000000 0xf 0x00000000 0x80000000
+			  0xf 0x80000000 0xf 0x80000000 0x80000000>;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <1>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4
+					 /*RXEOB*/ 0x1 &UIC1 0x7 0x4
+					 /*SERR*/  0x2 &UIC1 0x1 0x4
+					 /*TXDE*/  0x3 &UIC1 0x2 0x4
+					 /*RXDE*/  0x4 &UIC1 0x3 0x4>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>;
+			clock-frequency = <0>; /* Filled in by zImage */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x5 0x1>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x01000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "root";
+						reg = <0x00200000 0x00200000>;
+					};
+					partition@400000 {
+						label = "user";
+						reg = <0x00400000 0x00b60000>;
+					};
+					partition@f60000 {
+						label = "env";
+						reg = <0x00f60000 0x00040000>;
+					};
+					partition@fa0000 {
+						label = "u-boot";
+						reg = <0x00fa0000 0x00060000>;
+					};
+				};
+			};
+
+			UART0: serial@f0000200 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000200 0x00000008>;
+				virtual-reg = <0xa0000200>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				current-speed = <115200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			UART1: serial@f0000300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000300 0x00000008>;
+				virtual-reg = <0xa0000300>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+
+			UART2: serial@f0000600 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000600 0x00000008>;
+				virtual-reg = <0xa0000600>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x5 0x4>;
+			};
+
+			IIC0: i2c@f0000400 {
+				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xf0000400 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+
+			IIC1: i2c@f0000500 {
+				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xf0000500 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+			};
+
+			EMAC0: ethernet@f0000800 {
+				linux,network-index = <0x0>;
+				device_type = "network";
+				compatible = "ibm,emac-440spe", "ibm,emac4";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xf0000800 0x00000074>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "gmii";
+				phy-map = <0x00000000>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+		};
+
+		PCIX0: pci@c0ec00000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix";
+			primary;
+			large-inbound-windows;
+			enable-msi-hole;
+			reg = <0x0000000c 0x0ec00000 0x00000008   /* Config space access */
+			       0x00000000 0x00000000 0x00000000   /* no IACK cycles */
+			       0x0000000c 0x0ed00000 0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100   /* Internal registers */
+			       0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/*
+			 * On Katmai, the following PCI-X interrupts signals
+			 * have to be enabled via jumpers (only INTA is
+			 * enabled per default):
+			 *
+			 * INTB: J3: 1-2
+			 * INTC: J2: 1-2
+			 * INTD: J1: 1-2
+			 */
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+				/* IDSEL 1 */
+				0x800 0x0 0x0 0x1 &UIC1 0x14 0x8
+				0x800 0x0 0x0 0x2 &UIC1 0x13 0x8
+				0x800 0x0 0x0 0x3 &UIC1 0x12 0x8
+				0x800 0x0 0x0 0x4 &UIC1 0x11 0x8
+			>;
+		};
+
+		PCIE0: pciex@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0x10 to 0x1f */
+			bus-range = <0x10 0x1f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pciex@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0x20 to 0x2f */
+			bus-range = <0x20 0x2f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
+		};
+
+		PCIE2: pciex@d40000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+			primary;
+			port = <0x2>; /* port number */
+			reg = <0x0000000d 0x40000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10002000 0x00001000>;	/* Registers */
+			dcr-reg = <0x140 0x020>;
+			sdr-base = <0x370>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0x30 to 0x3f */
+			bus-range = <0x30 0x3f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
+		};
+
+		MSI: ppc4xx-msi@400300000 {
+				compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
+				reg = < 0x4 0x00300000 0x100>;
+				sdr-base = <0x3B0>;
+				msi-data = <0x00000000>;
+				msi-mask = <0x44440000>;
+				interrupt-count = <3>;
+				interrupts =<0 1 2 3>;
+				interrupt-parent = <&UIC0>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = <0 &UIC0 0xC 1
+					1 &UIC0 0x0D 1
+					2 &UIC0 0x0E 1
+					3 &UIC0 0x0F 1>;
+		};
+
+		I2O: i2o@400100000 {
+			compatible = "ibm,i2o-440spe";
+			reg = <0x00000004 0x00100000 0x100>;
+			dcr-reg = <0x060 0x020>;
+		};
+
+		DMA0: dma0@400100100 {
+			compatible = "ibm,dma-440spe";
+			cell-index = <0>;
+			reg = <0x00000004 0x00100100 0x100>;
+			dcr-reg = <0x060 0x020>;
+			interrupt-parent = <&DMA0>;
+			interrupts = <0 1>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <
+				0 &UIC0 0x14 4
+				1 &UIC1 0x16 4>;
+		};
+
+		DMA1: dma1@400100200 {
+			compatible = "ibm,dma-440spe";
+			cell-index = <1>;
+			reg = <0x00000004 0x00100200 0x100>;
+			dcr-reg = <0x060 0x020>;
+			interrupt-parent = <&DMA1>;
+			interrupts = <0 1>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <
+				0 &UIC0 0x16 4
+				1 &UIC1 0x16 4>;
+		};
+
+		xor-accel@400200000 {
+			compatible = "amcc,xor-accelerator";
+			reg = <0x00000004 0x00200000 0x400>;
+			interrupt-parent = <&UIC1>;
+			interrupts = <0x1f 4>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@f0000200";
+	};
+};
diff --git a/src/powerpc/kilauea.dts b/src/powerpc/kilauea.dts
new file mode 100644
index 000000000000..5ba7f01e2a29
--- /dev/null
+++ b/src/powerpc/kilauea.dts
@@ -0,0 +1,435 @@
+/*
+ * Device Tree Source for AMCC Kilauea (405EX)
+ *
+ * Copyright 2007-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "amcc,kilauea";
+	compatible = "amcc,kilauea";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,405EX";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>; /* 16 kB */
+			d-cache-size = <16384>; /* 16 kB */
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller {
+		compatible = "ibm,uic-405ex", "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-405ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-405ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	CPM0: cpm {
+		compatible = "ibm,cpm";
+		dcr-access-method = "native";
+		dcr-reg = <0x0b0 0x003>;
+		unused-units = <0x00000000>;
+		idle-doze = <0x02000000>;
+		standby = <0xe3e74800>;
+	};
+
+	plb {
+		compatible = "ibm,plb-405ex", "ibm,plb4";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: memory-controller {
+			compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2";
+			dcr-reg = <0x010 0x002>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x5 0x4	/* ECC DED Error */ 
+				      0x6 0x4>;	/* ECC SEC Error */ 
+		};
+
+		CRYPTO: crypto@ef700000 {
+			compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto";
+			reg = <0xef700000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x17 0x2>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-405ex", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x80000000 0x80000000 0x10000000
+				  0xef600000 0xef600000 0x00a00000
+				  0xf0000000 0xf0000000 0x10000000>;
+			dcr-reg = <0x0a0 0x005>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-405ex", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x5 0x1>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl512n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x04000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "root";
+						reg = <0x00200000 0x00200000>;
+					};
+					partition@400000 {
+						label = "user";
+						reg = <0x00400000 0x03b60000>;
+					};
+					partition@3f60000 {
+						label = "env";
+						reg = <0x03f60000 0x00040000>;
+					};
+					partition@3fa0000 {
+						label = "u-boot";
+						reg = <0x03fa0000 0x00060000>;
+					};
+				};
+
+				ndfc@1,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000001 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x00100000>;
+						};
+						partition@100000 {
+							label = "user";
+							reg = <0x00000000 0x03f00000>;
+						};
+					};
+				};
+			};
+
+			UART0: serial@ef600200 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600200 0x00000008>;
+				virtual-reg = <0xef600200>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1a 0x4>;
+			};
+
+			UART1: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@ef600400 {
+				compatible = "ibm,iic-405ex", "ibm,iic";
+				reg = <0xef600400 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				rtc@68 {
+					compatible = "dallas,ds1338";
+					reg = <0x68>;
+				};
+
+				dtt@48 {
+					compatible = "dallas,ds1775";
+					reg = <0x48>;
+				};
+			};
+
+			IIC1: i2c@ef600500 {
+				compatible = "ibm,iic-405ex", "ibm,iic";
+				reg = <0xef600500 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x7 0x4>;
+			};
+
+			RGMII0: emac-rgmii@ef600b00 {
+				compatible = "ibm,rgmii-405ex", "ibm,rgmii";
+				reg = <0xef600b00 0x00000104>;
+				has-mdio;
+			};
+
+			EMAC0: ethernet@ef600900 {
+				linux,network-index = <0x0>;
+				device_type = "network";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600900 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600a00 {
+				linux,network-index = <0x1>;
+				device_type = "network";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
+				reg = <0xef600a00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+		};
+
+		PCIE0: pciex@0a0000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0xa0000000 0x20000000	/* Config space access */
+			       0xef000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x040 0x020>;
+			sdr-base = <0x400>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 0x00 to 0x3f */
+			bus-range = <0x0 0x3f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pciex@0c0000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0xc0000000 0x20000000	/* Config space access */
+			       0xef001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x060 0x020>;
+			sdr-base = <0x440>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 0x40 to 0x7f */
+			bus-range = <0x40 0x7f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>;
+		};
+
+		MSI: ppc4xx-msi@C10000000 {
+			compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
+			reg = <0xEF620000 0x100>;
+			sdr-base = <0x4B0>;
+			msi-data = <0x00000000>;
+			msi-mask = <0x44440000>;
+			interrupt-count = <12>;
+			interrupts = <0 1 2 3 4 5 6 7 8 9 0xA 0xB 0xC 0xD>;
+			interrupt-parent = <&UIC2>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0 &UIC2 0x10 1
+					1 &UIC2 0x11 1
+					2 &UIC2 0x12 1
+					2 &UIC2 0x13 1
+					2 &UIC2 0x14 1
+					2 &UIC2 0x15 1
+					2 &UIC2 0x16 1
+					2 &UIC2 0x17 1
+					2 &UIC2 0x18 1
+					2 &UIC2 0x19 1
+					2 &UIC2 0x1A 1
+					2 &UIC2 0x1B 1
+					2 &UIC2 0x1C 1
+					3 &UIC2 0x1D 1>;
+		};
+	};
+};
diff --git a/src/powerpc/klondike.dts b/src/powerpc/klondike.dts
new file mode 100644
index 000000000000..8c9429033618
--- /dev/null
+++ b/src/powerpc/klondike.dts
@@ -0,0 +1,227 @@
+/*
+ * Device Tree for Klondike (APM8018X) board.
+ *
+ * Copyright (c) 2010, Applied Micro Circuits Corporation
+ * Author: Tanmay Inamdar <tinamdar@apm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "apm,klondike";
+	compatible = "apm,klondike";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,apm8018x";
+			reg = <0x00000000>;
+			clock-frequency = <300000000>; /* Filled in by U-Boot */
+			timebase-frequency = <300000000>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>; /* 16 kB */
+			d-cache-size = <16384>; /* 16 kB */
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x010>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x010>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x010>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x0a 0x4 0x0b 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x010>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	plb {
+		compatible = "ibm,plb4";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: memory-controller {
+			compatible = "ibm,sdram-apm8018x";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <16>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&UIC1>;
+			interrupts = </*TXEOB*/   0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x1 0x4
+					/*TXDE*/  0x2 0x4
+					/*RXDE*/  0x3 0x4>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x20000000 0x20000000 0x30000000
+				  0x50000000 0x50000000 0x10000000
+				  0x60000000 0x60000000 0x10000000
+				  0xFE000000 0xFE000000 0x00010000>;
+			dcr-reg = <0x100 0x020>;
+			clock-frequency = <300000000>; /* Filled in by U-Boot */
+
+			RGMII0: emac-rgmii@400a2000 {
+				compatible = "ibm,rgmii";
+				reg = <0x400a2000 0x00000010>;
+				has-mdio;
+			};
+
+			TAH0: emac-tah@400a3000 {
+				compatible = "ibm,tah";
+				reg = <0x400a3000 0x100>;
+			};
+
+			TAH1: emac-tah@400a4000 {
+				compatible = "ibm,tah";
+				reg = <0x400a4000 0x100>;
+			};
+
+			EMAC0: ethernet@400a0000 {
+				compatible = "ibm,emac4", "ibm-emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4>;
+				reg = <0x400a0000 0x00000100>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0x0>;
+				mal-rx-channel = <0x0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-address = <0x2>;
+				turbo = "no";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@400a1000 {
+				compatible = "ibm,emac4", "ibm-emac4sync";
+				status = "disabled";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4>;
+				reg = <0x400a1000 0x00000100>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <8>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-address = <0x3>;
+				turbo = "no";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				tah-device = <&TAH1>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@50001000";
+	};
+};
diff --git a/src/powerpc/kmeter1.dts b/src/powerpc/kmeter1.dts
new file mode 100644
index 000000000000..983aee185793
--- /dev/null
+++ b/src/powerpc/kmeter1.dts
@@ -0,0 +1,532 @@
+/*
+ * Keymile KMETER1 Device Tree Source
+ *
+ * 2008-2011 DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "KMETER1";
+	compatible = "keymile,KMETER1";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet_piggy2;
+		ethernet1 = &enet_estar1;
+		ethernet2 = &enet_estar2;
+		ethernet3 = &enet_eth1;
+		ethernet4 = &enet_eth2;
+		ethernet5 = &enet_eth3;
+		ethernet6 = &enet_eth4;
+		serial0 = &serial0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8360@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <32768>;		// L1, 32K
+			i-cache-size = <32768>;		// L1, 32K
+			timebase-frequency = <0>;	/* Filled in by U-Boot */
+			bus-frequency = <0>;	/* Filled in by U-Boot */
+			clock-frequency = <0>;	/* Filled in by U-Boot */
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0>;	/* Filled in by U-Boot */
+	};
+
+	soc8360@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8360-immr", "simple-bus";
+		ranges = <0x0 0xe0000000 0x00200000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;	/* Filled in by U-Boot */
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl,mpc8313-i2c","fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			clock-frequency = <400000>;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <264000000>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		ipic: pic@700 {
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			compatible = "fsl,pq2pro-pic", "fsl,ipic";
+			interrupt-controller;
+			reg = <0x700 0x100>;
+		};
+
+		par_io@1400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1400 0x100>;
+			compatible = "fsl,mpc8360-par_io";
+			num-ports = <7>;
+
+			qe_pio_c: gpio-controller@30 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8360-qe-pario-bank",
+					     "fsl,mpc8323-qe-pario-bank";
+				reg = <0x1430 0x18>;
+				gpio-controller;
+			};
+			pio_ucc1: ucc_pin@0 {
+				reg = <0>;
+
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO   */
+					0   2  1  0  1  0	/* MDC    */
+
+					0   3  1  0  1  0	/* TxD0   */
+					0   4  1  0  1  0	/* TxD1   */
+					0   5  1  0  1  0	/* TxD2   */
+					0   6  1  0  1  0	/* TxD3   */
+					0   9  2  0  1  0	/* RxD0   */
+					0  10  2  0  1  0	/* RxD1   */
+					0  11  2  0  1  0	/* RxD2   */
+					0  12  2  0  1  0	/* RxD3   */
+					0   7  1  0  1  0	/* TX_EN  */
+					0   8  1  0  1  0	/* TX_ER  */
+					0  15  2  0  1  0	/* RX_DV  */
+					0  16  2  0  1  0	/* RX_ER  */
+					0   0  2  0  1  0	/* RX_CLK */
+					2   9  1  0  3  0	/* GTX_CLK - CLK10 */
+					2   8  2  0  1  0	/* GTX125  - CLK9  */
+				>;
+			};
+
+			pio_ucc2: ucc_pin@1 {
+				reg = <1>;
+
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO   */
+					0   2  1  0  1  0	/* MDC    */
+
+					0  17  1  0  1  0	/* TxD0   */
+					0  18  1  0  1  0	/* TxD1   */
+					0  19  1  0  1  0	/* TxD2   */
+					0  20  1  0  1  0	/* TxD3   */
+					0  23  2  0  1  0	/* RxD0   */
+					0  24  2  0  1  0	/* RxD1   */
+					0  25  2  0  1  0	/* RxD2   */
+					0  26  2  0  1  0	/* RxD3   */
+					0  21  1  0  1  0	/* TX_EN  */
+					0  22  1  0  1  0	/* TX_ER  */
+					0  29  2  0  1  0	/* RX_DV  */
+					0  30  2  0  1  0	/* RX_ER  */
+					0  31  2  0  1  0	/* RX_CLK */
+					2  2   1  0  2  0	/* GTX_CLK - CLK3  */
+					2  3   2  0  1  0	/* GTX125  - CLK4  */
+				>;
+			};
+
+			pio_ucc4: ucc_pin@3 {
+				reg = <3>;
+
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO */
+					0   2  1  0  1  0	/* MDC  */
+
+					1  14  1  0  1  0	/* TxD0   (PB14, out, f1) */
+					1  15  1  0  1  0	/* TxD1   (PB15, out, f1) */
+					1  20  2  0  1  0	/* RxD0   (PB20, in,  f1) */
+					1  21  2  0  1  0	/* RxD1   (PB21, in,  f1) */
+					1  18  1  0  1  0	/* TX_EN  (PB18, out, f1) */
+					1  26  2  0  1  0	/* RX_DV  (PB26, in,  f1) */
+					1  27  2  0  1  0	/* RX_ER  (PB27, in,  f1) */
+
+					2  16  2  0  1  0	/* UCC4_RMII_CLK (CLK17) */
+				>;
+			};
+
+			pio_ucc5: ucc_pin@4 {
+				reg = <4>;
+
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO */
+					0   2  1  0  1  0	/* MDC  */
+
+					3   0  1  0  1  0	/* TxD0  (PD0,  out, f1) */
+					3   1  1  0  1  0	/* TxD1  (PD1,  out, f1) */
+					3   6  2  0  1  0	/* RxD0  (PD6,   in, f1) */
+					3   7  2  0  1  0	/* RxD1  (PD7,   in, f1) */
+					3   4  1  0  1  0	/* TX_EN (PD4,  out, f1) */
+					3  12  2  0  1  0	/* RX_DV (PD12,  in, f1) */
+					3  13  2  0  1  0	/* RX_ER (PD13,  in, f1) */
+				>;
+			};
+
+			pio_ucc6: ucc_pin@5 {
+				reg = <5>;
+
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO */
+					0   2  1  0  1  0	/* MDC  */
+
+					3  14  1  0  1  0	/* TxD0   (PD14, out, f1) */
+					3  15  1  0  1  0	/* TxD1   (PD15, out, f1) */
+					3  20  2  0  1  0	/* RxD0   (PD20, in,  f1) */
+					3  21  2  0  1  0	/* RxD1   (PD21, in,  f1) */
+					3  18  1  0  1  0	/* TX_EN  (PD18, out, f1) */
+					3  26  2  0  1  0	/* RX_DV  (PD26, in,  f1) */
+					3  27  2  0  1  0	/* RX_ER  (PD27, in,  f1) */
+				>;
+			};
+
+			pio_ucc7: ucc_pin@6 {
+				reg = <6>;
+
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO */
+					0   2  1  0  1  0	/* MDC  */
+
+					4   0  1  0  1  0	/* TxD0   (PE0,  out, f1) */
+					4   1  1  0  1  0	/* TxD1   (PE1,  out, f1) */
+					4   6  2  0  1  0	/* RxD0   (PE6,   in, f1) */
+					4   7  2  0  1  0	/* RxD1   (PE7,   in, f1) */
+					4   4  1  0  1  0	/* TX_EN  (PE4,  out, f1) */
+					4  12  2  0  1  0	/* RX_DV  (PE12,  in, f1) */
+					4  13  2  0  1  0	/* RX_ER  (PE13,  in, f1) */
+				>;
+			};
+
+			pio_ucc8: ucc_pin@7 {
+				reg = <7>;
+
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO */
+					0   2  1  0  1  0	/* MDC  */
+
+					4  14  1  0  2  0	/* TxD0   (PE14, out, f2) */
+					4  15  1  0  1  0	/* TxD1   (PE15, out, f1) */
+					4  20  2  0  1  0	/* RxD0   (PE20, in,  f1) */
+					4  21  2  0  1  0	/* RxD1   (PE21, in,  f1) */
+					4  18  1  0  1  0	/* TX_EN  (PE18, out, f1) */
+					4  26  2  0  1  0	/* RX_DV  (PE26, in,  f1) */
+					4  27  2  0  1  0	/* RX_ER  (PE27, in,  f1) */
+
+					2  15  2  0  1  0	/* UCCx_RMII_CLK (CLK16) */
+				>;
+			};
+
+		};
+
+		qe@100000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,qe";
+			ranges = <0x0 0x100000 0x100000>;
+			reg = <0x100000 0x480>;
+			clock-frequency = <0>;	/* Filled in by U-Boot */
+			brg-frequency = <0>;	/* Filled in by U-Boot */
+			bus-frequency = <0>;	/* Filled in by U-Boot */
+
+			muram@10000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,qe-muram", "fsl,cpm-muram";
+				ranges = <0x0 0x00010000 0x0000c000>;
+
+				data-only@0 {
+					compatible = "fsl,qe-muram-data",
+						     "fsl,cpm-muram-data";
+					reg = <0x0 0xc000>;
+				};
+			};
+
+			/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
+			enet_estar1: ucc@2000 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <1>;
+				reg = <0x2000 0x200>;
+				interrupts = <32>;
+				interrupt-parent = <&qeic>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				rx-clock-name = "none";
+				tx-clock-name = "clk9";
+				phy-handle = <&phy_estar1>;
+				phy-connection-type = "rgmii-id";
+				pio-handle = <&pio_ucc1>;
+			};
+
+			/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
+			enet_estar2: ucc@3000 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <2>;
+				reg = <0x3000 0x200>;
+				interrupts = <33>;
+				interrupt-parent = <&qeic>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				rx-clock-name = "none";
+				tx-clock-name = "clk4";
+				phy-handle = <&phy_estar2>;
+				phy-connection-type = "rgmii-id";
+				pio-handle = <&pio_ucc2>;
+			};
+
+			/* Piggy2 (UCC4, MDIO 0x00, RMII) */
+			enet_piggy2: ucc@3200 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <4>;
+				reg = <0x3200 0x200>;
+				interrupts = <35>;
+				interrupt-parent = <&qeic>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				rx-clock-name = "none";
+				tx-clock-name = "clk17";
+				phy-handle = <&phy_piggy2>;
+				phy-connection-type = "rmii";
+				pio-handle = <&pio_ucc4>;
+			};
+
+			/* Eth-1 (UCC5, MDIO 0x08, RMII) */
+			enet_eth1: ucc@2400 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <5>;
+				reg = <0x2400 0x200>;
+				interrupts = <40>;
+				interrupt-parent = <&qeic>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				rx-clock-name = "none";
+				tx-clock-name = "clk16";
+				phy-handle = <&phy_eth1>;
+				phy-connection-type = "rmii";
+				pio-handle = <&pio_ucc5>;
+			};
+
+			/* Eth-2 (UCC6, MDIO 0x09, RMII) */
+			enet_eth2: ucc@3400 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <6>;
+				reg = <0x3400 0x200>;
+				interrupts = <41>;
+				interrupt-parent = <&qeic>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				rx-clock-name = "none";
+				tx-clock-name = "clk16";
+				phy-handle = <&phy_eth2>;
+				phy-connection-type = "rmii";
+				pio-handle = <&pio_ucc6>;
+			};
+
+			/* Eth-3 (UCC7, MDIO 0x0a, RMII) */
+			enet_eth3: ucc@2600 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <7>;
+				reg = <0x2600 0x200>;
+				interrupts = <42>;
+				interrupt-parent = <&qeic>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				rx-clock-name = "none";
+				tx-clock-name = "clk16";
+				phy-handle = <&phy_eth3>;
+				phy-connection-type = "rmii";
+				pio-handle = <&pio_ucc7>;
+			};
+
+			/* Eth-4 (UCC8, MDIO 0x0b, RMII) */
+			enet_eth4: ucc@3600 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <8>;
+				reg = <0x3600 0x200>;
+				interrupts = <43>;
+				interrupt-parent = <&qeic>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				rx-clock-name = "none";
+				tx-clock-name = "clk16";
+				phy-handle = <&phy_eth4>;
+				phy-connection-type = "rmii";
+				pio-handle = <&pio_ucc8>;
+			};
+
+			mdio@3320 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x3320 0x18>;
+				compatible = "fsl,ucc-mdio";
+
+				/* Piggy2 (UCC4, MDIO 0x00, RMII) */
+				phy_piggy2: ethernet-phy@00 {
+					reg = <0x0>;
+				};
+
+				/* Eth-1 (UCC5, MDIO 0x08, RMII) */
+				phy_eth1: ethernet-phy@08 {
+					reg = <0x08>;
+				};
+
+				/* Eth-2 (UCC6, MDIO 0x09, RMII) */
+				phy_eth2: ethernet-phy@09 {
+					reg = <0x09>;
+				};
+
+				/* Eth-3 (UCC7, MDIO 0x0a, RMII) */
+				phy_eth3: ethernet-phy@0a {
+					reg = <0x0a>;
+				};
+
+				/* Eth-4 (UCC8, MDIO 0x0b, RMII) */
+				phy_eth4: ethernet-phy@0b {
+					reg = <0x0b>;
+				};
+
+				/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
+				phy_estar1: ethernet-phy@10 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x10>;
+				};
+
+				/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
+				phy_estar2: ethernet-phy@11 {
+					interrupt-parent = <&ipic>;
+					interrupts = <18 0x8>;
+					reg = <0x11>;
+				};
+			};
+
+			qeic: interrupt-controller@80 {
+				interrupt-controller;
+				compatible = "fsl,qe-ic";
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				reg = <0x80 0x80>;
+				big-endian;
+				interrupts = <
+					32 0x8
+					33 0x8
+					34 0x8
+					35 0x8
+					40 0x8
+					41 0x8
+					42 0x8
+					43 0x8
+				>;
+				interrupt-parent = <&ipic>;
+			};
+		};
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
+			     "simple-bus";
+		reg = <0xe0005000 0xd8>;
+		ranges = <0 0 0xf0000000 0x04000000	/* LB 0 */
+			  1 0 0xe8000000 0x01000000	/* LB 1 */
+			  3 0 0xa0000000 0x10000000>;	/* LB 3 */
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x04000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <2>;
+			partition@0 { /* 768KB */
+				label = "u-boot";
+				reg = <0 0xC0000>;
+			};
+			partition@c0000 { /* 128KB */
+				label = "env";
+				reg = <0xC0000 0x20000>;
+			};
+			partition@e0000 { /* 128KB */
+				label = "envred";
+				reg = <0xE0000 0x20000>;
+			};
+			partition@100000 { /* 64512KB */
+				label = "ubi0";
+				reg = <0x100000 0x3F00000>;
+			};
+		};
+	};
+};
diff --git a/src/powerpc/ksi8560.dts b/src/powerpc/ksi8560.dts
new file mode 100644
index 000000000000..5d68236e7c3c
--- /dev/null
+++ b/src/powerpc/ksi8560.dts
@@ -0,0 +1,344 @@
+/*
+ * Device Tree Source for Emerson KSI8560
+ *
+ * Author: Alexandr Smirnov <asmirnov@ru.mvista.com>
+ *
+ * Based on mpc8560ads.dts
+ *
+ * 2008 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+/dts-v1/;
+
+/ {
+	model = "KSI8560";
+	compatible = "emerson,KSI8560";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8560@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x8000>;		/* L1, 32K */
+			i-cache-size = <0x8000>;		/* L1, 32K */
+			timebase-frequency = <0>;		/* From U-boot */
+			bus-frequency = <0>;			/* From U-boot */
+			clock-frequency = <0>;			/* From U-boot */
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;			/* Fixed by bootwrapper */
+	};
+
+	soc@fdf00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x00000000 0xfdf00000 0x00100000>;
+		bus-frequency = <0>;				/* Fixed by bootwrapper */
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8540-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <0x12 0x2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8540-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <0x20>;		/* 32 bytes */
+			cache-size = <0x40000>;			/* L2, 256K */
+			interrupt-parent = <&mpic>;
+			interrupts = <0x10 0x2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <0x2b 0x2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			/* Mac address filled in by bootwrapper */
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&PHY1>;
+
+			mdio@520 {					/* For TSECs */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				PHY1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					reg = <0x1>;
+				};
+
+				PHY2: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					reg = <0x2>;
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			/* Mac address filled in by bootwrapper */
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&PHY2>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		mpic: pic@40000 {
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0x40000 0x40000>;
+			device_type = "open-pic";
+		};
+
+		cpm@919c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
+			reg = <0x919c0 0x30>;
+			ranges;
+
+			muram@80000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x80000 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x4000 0x9000 0x2000>;
+				};
+			};
+
+			brg@919f0 {
+				compatible = "fsl,mpc8560-brg",
+					     "fsl,cpm2-brg",
+					     "fsl,cpm-brg";
+				reg = <0x919f0 0x10 0x915f0 0x10>;
+				clock-frequency = <165000000>;	/* 166MHz */
+			};
+
+			CPMPIC: pic@90c00 {
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				interrupts = <0x2e 0x2>;
+				interrupt-parent = <&mpic>;
+				reg = <0x90c00 0x80>;
+				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
+			};
+
+			serial@91a00 {
+				device_type = "serial";
+				compatible = "fsl,mpc8560-scc-uart",
+					     "fsl,cpm2-scc-uart";
+				reg = <0x91a00 0x20 0x88000 0x100>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x800000>;
+				current-speed = <0x1c200>;
+				interrupts = <0x28 0x8>;
+				interrupt-parent = <&CPMPIC>;
+			};
+
+			serial@91a20 {
+				device_type = "serial";
+				compatible = "fsl,mpc8560-scc-uart",
+					     "fsl,cpm2-scc-uart";
+				reg = <0x91a20 0x20 0x88100 0x100>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <0x4a00000>;
+				current-speed = <0x1c200>;
+				interrupts = <0x29 0x8>;
+				interrupt-parent = <&CPMPIC>;
+			};
+
+			mdio@90d00 {				/* For FCCs */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,cpm2-mdio-bitbang";
+				reg = <0x90d00 0x14>;
+				fsl,mdio-pin = <24>;
+				fsl,mdc-pin = <25>;
+
+				PHY0: ethernet-phy@0 {
+					interrupt-parent = <&mpic>;
+					reg = <0x0>;
+				};
+			};
+
+			enet2: ethernet@91300 {
+				device_type = "network";
+				compatible = "fsl,mpc8560-fcc-enet",
+					     "fsl,cpm2-fcc-enet";
+				reg = <0x91300 0x20 0x88400 0x100 0x91390 0x1>;
+				/* Mac address filled in by bootwrapper */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				fsl,cpm-command = <0x12000300>;
+				interrupts = <0x20 0x8>;
+				interrupt-parent = <&CPMPIC>;
+				phy-handle = <&PHY0>;
+			};
+		};
+	};
+
+	localbus@fdf05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8560-localbus", "simple-bus";
+		reg = <0xfdf05000 0x68>;
+
+		ranges = <0x0 0x0 0xe0000000 0x00800000
+			  0x4 0x0 0xe8080000 0x00080000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "jedec-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <0x2>;
+
+			partition@0 {
+				label = "Primary Kernel";
+				reg = <0x0 0x180000>;
+			};
+			partition@180000 {
+				label = "Primary Filesystem";
+				reg = <0x180000 0x580000>;
+			};
+			partition@700000 {
+				label = "Monitor";
+				reg = <0x300000 0x100000>;
+				read-only;
+			};
+		};
+
+		cpld@4,0 {
+			compatible = "emerson,KSI8560-cpld";
+			reg = <0x4 0x0 0x80000>;
+		};
+	};
+
+
+	chosen {
+		linux,stdout-path = "/soc/cpm/serial@91a00";
+	};
+};
diff --git a/src/powerpc/kuroboxHD.dts b/src/powerpc/kuroboxHD.dts
new file mode 100644
index 000000000000..0a4545159e80
--- /dev/null
+++ b/src/powerpc/kuroboxHD.dts
@@ -0,0 +1,147 @@
+/*
+ * Device Tree Souce for Buffalo KuroboxHD
+ *
+ * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHD, or use
+ * the default configuration linkstation_defconfig.
+ *
+ * Based on sandpoint.dts
+ *
+ * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+
+XXXX add flash parts, rtc, ??
+
+ */
+
+/dts-v1/;
+
+/ {
+	model = "KuroboxHD";
+	compatible = "linkstation";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,603e { /* Really 8241 */
+			device_type = "cpu";
+			reg = <0x0>;
+			clock-frequency = <200000000>;	/* Fixed by bootloader */
+			timebase-frequency = <24391680>; /* Fixed by bootloader */
+			bus-frequency = <0>;		/* Fixed by bootloader */
+			/* Following required by dtc but not used */
+			i-cache-size = <0x4000>;
+			d-cache-size = <0x4000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;
+	};
+
+	soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "mpc10x";
+		store-gathering = <0>; /* 0 == off, !0 == on */
+		reg = <0x80000000 0x100000>;
+		ranges = <0x80000000 0x80000000 0x70000000	/* pci mem space */
+			  0xfc000000 0xfc000000 0x100000	/* EUMB */
+			  0xfe000000 0xfe000000 0xc00000	/* pci i/o space */
+			  0xfec00000 0xfec00000 0x300000	/* pci cfg regs */
+			  0xfef00000 0xfef00000 0x100000>;	/* pci iack */
+
+		i2c@80003000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x80003000 0x1000>;
+			interrupts = <5 2>;
+			interrupt-parent = <&mpic>;
+
+			rtc@32 {
+				compatible = "ricoh,rs5c372a";
+				reg = <0x32>;
+			};
+		};
+
+		serial0: serial@80004500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x80004500 0x8>;
+			clock-frequency = <97553800>;
+			current-speed = <9600>;
+			interrupts = <9 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@80004600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x80004600 0x8>;
+			clock-frequency = <97553800>;
+			current-speed = <57600>;
+			interrupts = <10 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		mpic: interrupt-controller@80040000 {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			device_type = "open-pic";
+			compatible = "chrp,open-pic";
+			interrupt-controller;
+			reg = <0x80040000 0x40000>;
+		};
+
+		pci0: pci@fec00000 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			compatible = "mpc10x-pci";
+			reg = <0xfec00000 0x400000>;
+			ranges = <0x1000000 0x0        0x0 0xfe000000 0x0 0xc00000
+				  0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>;
+			bus-range = <0 255>;
+			clock-frequency = <133333333>;
+			interrupt-parent = <&mpic>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+				/* IDSEL 11 - IRQ0 ETH */
+				0x5800 0x0 0x0 0x1 &mpic 0x0 0x1
+				0x5800 0x0 0x0 0x2 &mpic 0x1 0x1
+				0x5800 0x0 0x0 0x3 &mpic 0x2 0x1
+				0x5800 0x0 0x0 0x4 &mpic 0x3 0x1
+				/* IDSEL 12 - IRQ1 IDE0 */
+				0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
+				0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
+				0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
+				0x6000 0x0 0x0 0x4 &mpic 0x0 0x1
+				/* IDSEL 14 - IRQ3 USB2.0 */
+				0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
+				0x7000 0x0 0x0 0x2 &mpic 0x3 0x1
+				0x7000 0x0 0x0 0x3 &mpic 0x3 0x1
+				0x7000 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		};
+	};
+};
diff --git a/src/powerpc/kuroboxHG.dts b/src/powerpc/kuroboxHG.dts
new file mode 100644
index 000000000000..0e758b347cdb
--- /dev/null
+++ b/src/powerpc/kuroboxHG.dts
@@ -0,0 +1,147 @@
+/*
+ * Device Tree Souce for Buffalo KuroboxHG
+ *
+ * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHG, or use
+ * the default configuration linkstation_defconfig.
+ *
+ * Based on sandpoint.dts
+ *
+ * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+
+XXXX add flash parts, rtc, ??
+
+ */
+
+/dts-v1/;
+
+/ {
+	model = "KuroboxHG";
+	compatible = "linkstation";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,603e { /* Really 8241 */
+			device_type = "cpu";
+			reg = <0x0>;
+			clock-frequency = <266000000>;	/* Fixed by bootloader */
+			timebase-frequency = <32522240>; /* Fixed by bootloader */
+			bus-frequency = <0>;		/* Fixed by bootloader */
+			/* Following required by dtc but not used */
+			i-cache-size = <0x4000>;
+			d-cache-size = <0x4000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x8000000>;
+	};
+
+	soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "mpc10x";
+		store-gathering = <0>; /* 0 == off, !0 == on */
+		reg = <0x80000000 0x100000>;
+		ranges = <0x80000000 0x80000000 0x70000000	/* pci mem space */
+			  0xfc000000 0xfc000000 0x100000	/* EUMB */
+			  0xfe000000 0xfe000000 0xc00000	/* pci i/o space */
+			  0xfec00000 0xfec00000 0x300000	/* pci cfg regs */
+			  0xfef00000 0xfef00000 0x100000>;	/* pci iack */
+
+		i2c@80003000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x80003000 0x1000>;
+			interrupts = <5 2>;
+			interrupt-parent = <&mpic>;
+
+			rtc@32 {
+				compatible = "ricoh,rs5c372a";
+				reg = <0x32>;
+			};
+		};
+
+		serial0: serial@80004500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x80004500 0x8>;
+			clock-frequency = <130041000>;
+			current-speed = <9600>;
+			interrupts = <9 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@80004600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x80004600 0x8>;
+			clock-frequency = <130041000>;
+			current-speed = <57600>;
+			interrupts = <10 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		mpic: interrupt-controller@80040000 {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			device_type = "open-pic";
+			compatible = "chrp,open-pic";
+			interrupt-controller;
+			reg = <0x80040000 0x40000>;
+		};
+
+		pci0: pci@fec00000 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			compatible = "mpc10x-pci";
+			reg = <0xfec00000 0x400000>;
+			ranges = <0x1000000 0x0        0x0 0xfe000000 0x0 0xc00000
+				  0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>;
+			bus-range = <0 255>;
+			clock-frequency = <133333333>;
+			interrupt-parent = <&mpic>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+				/* IDSEL 11 - IRQ0 ETH */
+				0x5800 0x0 0x0 0x1 &mpic 0x0 0x1
+				0x5800 0x0 0x0 0x2 &mpic 0x1 0x1
+				0x5800 0x0 0x0 0x3 &mpic 0x2 0x1
+				0x5800 0x0 0x0 0x4 &mpic 0x3 0x1
+				/* IDSEL 12 - IRQ1 IDE0 */
+				0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
+				0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
+				0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
+				0x6000 0x0 0x0 0x4 &mpic 0x0 0x1
+				/* IDSEL 14 - IRQ3 USB2.0 */
+				0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
+				0x7000 0x0 0x0 0x2 &mpic 0x3 0x1
+				0x7000 0x0 0x0 0x3 &mpic 0x3 0x1
+				0x7000 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		};
+	};
+};
diff --git a/src/powerpc/lite5200.dts b/src/powerpc/lite5200.dts
new file mode 100644
index 000000000000..179a1785d645
--- /dev/null
+++ b/src/powerpc/lite5200.dts
@@ -0,0 +1,308 @@
+/*
+ * Lite5200 board Device Tree Source
+ *
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ * Grant Likely <grant.likely@secretlab.ca>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "fsl,lite5200";
+	compatible = "fsl,lite5200";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;	// 64MB
+	};
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>;		// from bootloader
+		system-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+		};
+
+		timer@600 {	// General Purpose Timer
+			compatible = "fsl,mpc5200-gpt";
+			reg = <0x600 0x10>;
+			interrupts = <1 9 0>;
+			fsl,has-wdt;
+		};
+
+		timer@610 {	// General Purpose Timer
+			compatible = "fsl,mpc5200-gpt";
+			reg = <0x610 0x10>;
+			interrupts = <1 10 0>;
+		};
+
+		timer@620 {	// General Purpose Timer
+			compatible = "fsl,mpc5200-gpt";
+			reg = <0x620 0x10>;
+			interrupts = <1 11 0>;
+		};
+
+		timer@630 {	// General Purpose Timer
+			compatible = "fsl,mpc5200-gpt";
+			reg = <0x630 0x10>;
+			interrupts = <1 12 0>;
+		};
+
+		timer@640 {	// General Purpose Timer
+			compatible = "fsl,mpc5200-gpt";
+			reg = <0x640 0x10>;
+			interrupts = <1 13 0>;
+		};
+
+		timer@650 {	// General Purpose Timer
+			compatible = "fsl,mpc5200-gpt";
+			reg = <0x650 0x10>;
+			interrupts = <1 14 0>;
+		};
+
+		timer@660 {	// General Purpose Timer
+			compatible = "fsl,mpc5200-gpt";
+			reg = <0x660 0x10>;
+			interrupts = <1 15 0>;
+		};
+
+		timer@670 {	// General Purpose Timer
+			compatible = "fsl,mpc5200-gpt";
+			reg = <0x670 0x10>;
+			interrupts = <1 16 0>;
+		};
+
+		rtc@800 {	// Real time clock
+			compatible = "fsl,mpc5200-rtc";
+			reg = <0x800 0x100>;
+			interrupts = <1 5 0 1 6 0>;
+		};
+
+		can@900 {
+			compatible = "fsl,mpc5200-mscan";
+			interrupts = <2 17 0>;
+			reg = <0x900 0x80>;
+		};
+
+		can@980 {
+			compatible = "fsl,mpc5200-mscan";
+			interrupts = <2 18 0>;
+			reg = <0x980 0x80>;
+		};
+
+		gpio@b00 {
+			compatible = "fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio@c00 {
+			compatible = "fsl,mpc5200-gpio-wkup";
+			reg = <0xc00 0x40>;
+			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		spi@f00 {
+			compatible = "fsl,mpc5200-spi";
+			reg = <0xf00 0x20>;
+			interrupts = <2 13 0 2 14 0>;
+		};
+
+		usb@1000 {
+			compatible = "fsl,mpc5200-ohci","ohci-be";
+			reg = <0x1000 0xff>;
+			interrupts = <2 6 0>;
+		};
+
+		dma-controller@1200 {
+			compatible = "fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		serial@2000 {		// PSC1
+			compatible = "fsl,mpc5200-psc-uart";
+			cell-index = <0>;
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		// PSC2 in ac97 mode example
+		//ac97@2200 {		// PSC2
+		//	compatible = "fsl,mpc5200-psc-ac97";
+		//	cell-index = <1>;
+		//	reg = <0x2200 0x100>;
+		//	interrupts = <2 2 0>;
+		//};
+
+		// PSC3 in CODEC mode example
+		//i2s@2400 {		// PSC3
+		//	compatible = "fsl,mpc5200-psc-i2s";
+		//	cell-index = <2>;
+		//	reg = <0x2400 0x100>;
+		//	interrupts = <2 3 0>;
+		//};
+
+		// PSC4 in uart mode example
+		//serial@2600 {		// PSC4
+		//	compatible = "fsl,mpc5200-psc-uart";
+		//	cell-index = <3>;
+		//	reg = <0x2600 0x100>;
+		//	interrupts = <2 11 0>;
+		//};
+
+		// PSC5 in uart mode example
+		//serial@2800 {		// PSC5
+		//	compatible = "fsl,mpc5200-psc-uart";
+		//	cell-index = <4>;
+		//	reg = <0x2800 0x100>;
+		//	interrupts = <2 12 0>;
+		//};
+
+		// PSC6 in spi mode example
+		//spi@2c00 {		// PSC6
+		//	compatible = "fsl,mpc5200-psc-spi";
+		//	cell-index = <5>;
+		//	reg = <0x2c00 0x100>;
+		//	interrupts = <2 4 0>;
+		//};
+
+		ethernet@3000 {
+			compatible = "fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
+
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		i2c@3d00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d00 0x40>;
+			interrupts = <2 15 0>;
+		};
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
+				 0xc000 0 0 2 &mpc5200_pic 0 0 3
+				 0xc000 0 0 3 &mpc5200_pic 0 0 3
+				 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0 0 0xff000000 0x01000000>;
+
+		flash@0,0 {
+			compatible = "amd,am29lv652d", "cfi-flash";
+			reg = <0 0 0x01000000>;
+			bank-width = <1>;
+		};
+	};
+};
diff --git a/src/powerpc/lite5200b.dts b/src/powerpc/lite5200b.dts
new file mode 100644
index 000000000000..5abb46c5cc95
--- /dev/null
+++ b/src/powerpc/lite5200b.dts
@@ -0,0 +1,161 @@
+/*
+ * Lite5200B board Device Tree Source
+ *
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ * Grant Likely <grant.likely@secretlab.ca>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 { fsl,has-wdt; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+
+/ {
+	model = "fsl,lite5200b";
+	compatible = "fsl,lite5200b";
+
+	leds {
+		compatible = "gpio-leds";
+		tmr2 {
+			gpios = <&gpt2 0 1>;
+		};
+		tmr3 {
+			gpios = <&gpt3 0 1>;
+			linux,default-trigger = "heartbeat";
+		};
+		led1 { gpios = <&gpio_wkup 2 1>; };
+		led2 { gpios = <&gpio_simple 3 1>; };
+		led3 { gpios = <&gpio_wkup 3 1>; };
+		led4 { gpios = <&gpio_simple 2 1>; };
+	};
+
+	memory {
+		reg = <0x00000000 0x10000000>;	// 256MB
+	};
+
+	soc5200@f0000000 {
+		psc@2000 {		// PSC1
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			cell-index = <0>;
+		};
+
+		psc@2200 {		// PSC2
+			status = "disabled";
+		};
+
+		psc@2400 {		// PSC3
+			status = "disabled";
+		};
+
+		psc@2600 {		// PSC4
+			status = "disabled";
+		};
+
+		psc@2800 {		// PSC5
+			status = "disabled";
+		};
+
+		psc@2c00 {		// PSC6
+			status = "disabled";
+		};
+
+		// PSC2 in ac97 mode example
+		//ac97@2200 {		// PSC2
+		//	compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
+		//	cell-index = <1>;
+		//};
+
+		// PSC3 in CODEC mode example
+		//i2s@2400 {		// PSC3
+		//	compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible
+		//	cell-index = <2>;
+		//};
+
+		// PSC6 in spi mode example
+		//spi@2c00 {		// PSC6
+		//	compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
+		//	cell-index = <5>;
+		//};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		i2c@3d40 {
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	pci@f0000d00 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
+				 0xc000 0 0 2 &mpc5200_pic 1 1 3
+				 0xc000 0 0 3 &mpc5200_pic 1 2 3
+				 0xc000 0 0 4 &mpc5200_pic 1 3 3
+
+				 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
+				 0xc800 0 0 2 &mpc5200_pic 1 2 3
+				 0xc800 0 0 3 &mpc5200_pic 1 3 3
+				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+	};
+
+	localbus {
+		ranges = <0 0 0xfe000000 0x02000000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <1>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00200000>;
+			};
+			partition@200000 {
+				label = "rootfs";
+				reg = <0x00200000 0x01d00000>;
+			};
+			partition@1f00000 {
+				label = "u-boot";
+				reg = <0x01f00000 0x00060000>;
+			};
+			partition@1f60000 {
+				label = "u-boot-env";
+				reg = <0x01f60000 0x00020000>;
+			};
+			partition@1f80000 {
+				label = "dtb";
+				reg = <0x01f80000 0x00080000>;
+			};
+		};
+	};
+
+};
diff --git a/src/powerpc/makalu.dts b/src/powerpc/makalu.dts
new file mode 100644
index 000000000000..63d48b632c84
--- /dev/null
+++ b/src/powerpc/makalu.dts
@@ -0,0 +1,353 @@
+/*
+ * Device Tree Source for AMCC Makalu (405EX)
+ *
+ * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "amcc,makalu";
+	compatible = "amcc,makalu";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,405EX";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>; /* 16 kB */
+			d-cache-size = <16384>; /* 16 kB */
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller {
+		compatible = "ibm,uic-405ex", "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-405ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-405ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	plb {
+		compatible = "ibm,plb-405ex", "ibm,plb4";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: memory-controller {
+			compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2";
+			dcr-reg = <0x010 0x002>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x5 0x4 /* ECC DED Error */
+			              0x6 0x4 /* ECC SEC Error */ >;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-405ex", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x80000000 0x80000000 0x10000000
+				  0xef600000 0xef600000 0x00a00000
+				  0xf0000000 0xf0000000 0x10000000>;
+			dcr-reg = <0x0a0 0x005>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-405ex", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x5 0x1>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl512n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x04000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x00200000>;
+					};
+					partition@200000 {
+						label = "root";
+						reg = <0x00200000 0x00200000>;
+					};
+					partition@400000 {
+						label = "user";
+						reg = <0x00400000 0x03b60000>;
+					};
+					partition@3f60000 {
+						label = "env";
+						reg = <0x03f60000 0x00040000>;
+					};
+					partition@3fa0000 {
+						label = "u-boot";
+						reg = <0x03fa0000 0x00060000>;
+					};
+				};
+			};
+
+			UART0: serial@ef600200 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600200 0x00000008>;
+				virtual-reg = <0xef600200>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1a 0x4>;
+			};
+
+			UART1: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@ef600400 {
+				compatible = "ibm,iic-405ex", "ibm,iic";
+				reg = <0xef600400 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+
+			IIC1: i2c@ef600500 {
+				compatible = "ibm,iic-405ex", "ibm,iic";
+				reg = <0xef600500 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x7 0x4>;
+			};
+
+
+			RGMII0: emac-rgmii@ef600b00 {
+				compatible = "ibm,rgmii-405ex", "ibm,rgmii";
+				reg = <0xef600b00 0x00000104>;
+				has-mdio;
+			};
+
+			EMAC0: ethernet@ef600900 {
+				linux,network-index = <0x0>;
+				device_type = "network";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600900 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x0000003f>;	/* Start at 6 */
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600a00 {
+				linux,network-index = <0x1>;
+				device_type = "network";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
+				reg = <0xef600a00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+                                rx-fifo-size-gige = <16384>;
+                                tx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+		};
+
+		PCIE0: pciex@0a0000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0xa0000000 0x20000000	/* Config space access */
+			       0xef000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x040 0x020>;
+			sdr-base = <0x400>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 0x00 to 0x3f */
+			bus-range = <0x0 0x3f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pciex@0c0000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0xc0000000 0x20000000	/* Config space access */
+			       0xef001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x060 0x020>;
+			sdr-base = <0x440>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 0x40 to 0x7f */
+			bus-range = <0x40 0x7f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>;
+		};
+	};
+};
diff --git a/src/powerpc/media5200.dts b/src/powerpc/media5200.dts
new file mode 100644
index 000000000000..b5413cb85f13
--- /dev/null
+++ b/src/powerpc/media5200.dts
@@ -0,0 +1,146 @@
+/*
+ * Freescale Media5200 board Device Tree Source
+ *
+ * Copyright 2009 Secret Lab Technologies Ltd.
+ * Grant Likely <grant.likely@secretlab.ca>
+ * Steven Cavanagh <scavanagh@secretlab.ca>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 { fsl,has-wdt; };
+
+/ {
+	model = "fsl,media5200";
+	compatible = "fsl,media5200";
+
+	aliases {
+		console = &console;
+		ethernet0 = &eth0;
+	};
+
+	chosen {
+		linux,stdout-path = &console;
+	};
+
+	cpus {
+		PowerPC,5200@0 {
+			timebase-frequency = <33000000>;	// 33 MHz, these were configured by U-Boot
+			bus-frequency = <132000000>;		// 132 MHz
+			clock-frequency = <396000000>;		// 396 MHz
+		};
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;	// 128MB RAM
+	};
+
+	soc5200@f0000000 {
+		bus-frequency = <132000000>;// 132 MHz
+
+		psc@2000 {	// PSC1
+			status = "disabled";
+		};
+
+		psc@2200 {	// PSC2
+			status = "disabled";
+		};
+
+		psc@2400 {	// PSC3
+			status = "disabled";
+		};
+
+		psc@2600 {	// PSC4
+			status = "disabled";
+		};
+
+		psc@2800 {	// PSC5
+			status = "disabled";
+		};
+
+		// PSC6 in uart mode
+		console: psc@2c00 {		// PSC6
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		usb@1000 {
+			reg = <0x1000 0x100>;
+		};
+	};
+
+	pci@f0000d00 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot
+				 0xc000 0 0 2 &media5200_fpga 0 3
+				 0xc000 0 0 3 &media5200_fpga 0 4
+				 0xc000 0 0 4 &media5200_fpga 0 5
+
+				 0xc800 0 0 1 &media5200_fpga 0 3 // 2nd slot
+				 0xc800 0 0 2 &media5200_fpga 0 4
+				 0xc800 0 0 3 &media5200_fpga 0 5
+				 0xc800 0 0 4 &media5200_fpga 0 2
+
+				 0xd000 0 0 1 &media5200_fpga 0 4 // miniPCI
+				 0xd000 0 0 2 &media5200_fpga 0 5
+
+				 0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP
+				>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+		interrupt-parent = <&mpc5200_pic>;
+	};
+
+	localbus {
+		ranges = < 0 0 0xfc000000 0x02000000
+			   1 0 0xfe000000 0x02000000
+			   2 0 0xf0010000 0x00010000
+			   3 0 0xf0020000 0x00010000 >;
+		flash@0,0 {
+			compatible = "amd,am29lv28ml", "cfi-flash";
+			reg = <0 0x0 0x2000000>;                // 32 MB
+			bank-width = <4>;                       // Width in bytes of the flash bank
+			device-width = <2>;                     // Two devices on each bank
+		};
+
+		flash@1,0 {
+			compatible = "amd,am29lv28ml", "cfi-flash";
+			reg = <1 0 0x2000000>;                  // 32 MB
+			bank-width = <4>;                       // Width in bytes of the flash bank
+			device-width = <2>;                     // Two devices on each bank
+		};
+
+		media5200_fpga: fpga@2,0 {
+			compatible = "fsl,media5200-fpga";
+			interrupt-controller;
+			#interrupt-cells = <2>;	// 0:bank 1:id; no type field
+			reg = <2 0 0x10000>;
+
+			interrupt-parent = <&mpc5200_pic>;
+			interrupts = <0 0 3	// IRQ bank 0
+			              1 1 3>;	// IRQ bank 1
+		};
+
+		uart@3,0 {
+			compatible = "ti,tl16c752bpt";
+			reg = <3 0 0x10000>;
+			interrupt-parent = <&media5200_fpga>;
+			interrupts = <0 0  0 1>; // 2 irqs
+		};
+	};
+};
diff --git a/src/powerpc/mgcoge.dts b/src/powerpc/mgcoge.dts
new file mode 100644
index 000000000000..d72fb5e219d0
--- /dev/null
+++ b/src/powerpc/mgcoge.dts
@@ -0,0 +1,264 @@
+/*
+ * Device Tree for the MGCOGE plattform from keymile
+ *
+ * Copyright 2008 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "MGCOGE";
+	compatible = "keymile,km82xx";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &eth0;
+		serial0 = &smc2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8247@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			bus-frequency = <0>; /* Filled in by U-Boot */
+		};
+	};
+
+	localbus@f0010100 {
+		compatible = "fsl,mpc8247-localbus",
+		             "fsl,pq2-localbus",
+		             "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xf0010100 0x40>;
+
+		ranges = <0 0 0xfe000000 0x00400000
+			  1 0 0x30000000 0x00010000
+			  2 0 0x40000000 0x00010000
+			  5 0 0x50000000 0x04000000
+			>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0x0 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <1>;
+			device-width = <1>;
+			partition@0 {
+				label = "u-boot";
+				reg = <0x00000 0xC0000>;
+			};
+			partition@1 {
+				label = "env";
+				reg = <0xC0000 0x20000>;
+			};
+			partition@2 {
+				label = "envred";
+				reg = <0xE0000 0x20000>;
+			};
+			partition@3 {
+				label = "free";
+				reg = <0x100000 0x300000>;
+			};
+		};
+
+		flash@5,0 {
+			compatible = "cfi-flash";
+			reg = <5 0x00000000 0x02000000
+			       5 0x02000000 0x02000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <2>;
+			partition@app { /* 64 MBytes */
+				label = "ubi0";
+				reg = <0x00000000 0x04000000>;
+			};
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0>; /* Filled in by U-Boot */
+	};
+
+	soc@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8247-immr", "fsl,pq2-soc", "simple-bus";
+		ranges = <0x00000000 0xf0000000 0x00053000>;
+
+		// Temporary until code stops depending on it.
+		device_type = "soc";
+
+		cpm@119c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#interrupt-cells = <2>;
+			compatible = "fsl,mpc8247-cpm", "fsl,cpm2",
+					"simple-bus";
+			reg = <0x119c0 0x30>;
+			ranges;
+
+			muram {
+				compatible = "fsl,cpm-muram";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x80 0x1f80 0x9800 0x800>;
+				};
+			};
+
+			brg@119f0 {
+				compatible = "fsl,mpc8247-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <0x119f0 0x10 0x115f0 0x10>;
+			};
+
+			/* Monitor port/SMC2 */
+			smc2: serial@11a90 {
+				device_type = "serial";
+				compatible = "fsl,mpc8247-smc-uart",
+				             "fsl,cpm2-smc-uart";
+				reg = <0x11a90 0x20 0x88fc 0x02>;
+				interrupts = <5 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <0x21200000>;
+				current-speed = <0>; /* Filled in by U-Boot */
+			};
+
+			eth0: ethernet@11a60 {
+				device_type = "network";
+				compatible = "fsl,mpc8247-scc-enet",
+				             "fsl,cpm2-scc-enet";
+				reg = <0x11a60 0x20 0x8300 0x100 0x11390 1>;
+				local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */
+				interrupts = <43 8>;
+				interrupt-parent = <&PIC>;
+				linux,network-index = <0>;
+				fsl,cpm-command = <0xce00000>;
+				fixed-link = <0 0 10 0 0>;
+			};
+
+			i2c@11860 {
+				compatible = "fsl,mpc8272-i2c",
+					     "fsl,cpm2-i2c";
+				reg = <0x11860 0x20 0x8afc 0x2>;
+				interrupts = <1 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-command = <0x29600000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mdio@10d40 {
+				compatible = "fsl,cpm2-mdio-bitbang";
+				reg = <0x10d00 0x14>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fsl,mdio-pin = <12>;
+				fsl,mdc-pin = <13>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0x0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			/* FCC1 management to switch */
+			ethernet@11300 {
+				device_type = "network";
+				compatible = "fsl,cpm2-fcc-enet";
+				reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>;
+				local-mac-address = [ 00 01 02 03 04 07 ];
+				interrupts = <32 8>;
+				interrupt-parent = <&PIC>;
+				phy-handle = <&phy0>;
+				linux,network-index = <1>;
+				fsl,cpm-command = <0x12000300>;
+			};
+
+			/* FCC2 to redundant core unit over backplane */
+			ethernet@11320 {
+				device_type = "network";
+				compatible = "fsl,cpm2-fcc-enet";
+				reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
+				local-mac-address = [ 00 01 02 03 04 08 ];
+				interrupts = <33 8>;
+				interrupt-parent = <&PIC>;
+				phy-handle = <&phy1>;
+				linux,network-index = <2>;
+				fsl,cpm-command = <0x16200300>;
+			};
+
+			usb@11b60 {
+				compatible = "fsl,mpc8272-cpm-usb";
+				mode = "peripheral";
+				reg = <0x11b60 0x40 0x8b00 0x100>;
+				interrupts = <11 8>;
+				interrupt-parent = <&PIC>;
+				usb-clock = <5>;
+			};
+			spi@11aa0 {
+				cell-index = <0>;
+				compatible = "fsl,spi", "fsl,cpm2-spi";
+				reg = <0x11a80 0x40 0x89fc 0x2>;
+				interrupts = <2 8>;
+				interrupt-parent = <&PIC>;
+				gpios = < &cpm2_pio_d 19 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ds3106@1 {
+					compatible = "gen,spidev";
+					reg = <0>;
+					spi-max-frequency = <8000000>;
+				};
+			};
+
+		};
+
+		cpm2_pio_d: gpio-controller@10d60 {
+			#gpio-cells = <2>;
+			compatible = "fsl,cpm2-pario-bank";
+			reg = <0x10d60 0x14>;
+			gpio-controller;
+		};
+
+		cpm2_pio_c: gpio-controller@10d40 {
+			#gpio-cells = <2>;
+			compatible = "fsl,cpm2-pario-bank";
+			reg = <0x10d40 0x14>;
+			gpio-controller;
+		};
+
+		PIC: interrupt-controller@10c00 {
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0x10c00 0x80>;
+			compatible = "fsl,mpc8247-pic", "fsl,pq2-pic";
+		};
+	};
+};
diff --git a/src/powerpc/motionpro.dts b/src/powerpc/motionpro.dts
new file mode 100644
index 000000000000..bbabd97492ad
--- /dev/null
+++ b/src/powerpc/motionpro.dts
@@ -0,0 +1,136 @@
+/*
+ * Motion-PRO board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 { fsl,has-wdt; };
+&gpt6 { // Motion-PRO status LED
+	compatible = "promess,motionpro-led";
+	label = "motionpro-statusled";
+	blink-delay = <100>; // 100 msec
+};
+&gpt7 { // Motion-PRO ready LED
+	compatible = "promess,motionpro-led";
+	label = "motionpro-readyled";
+};
+
+/ {
+	model = "promess,motionpro";
+	compatible = "promess,motionpro";
+
+	soc5200@f0000000 {
+		can@900 {
+			status = "disabled";
+		};
+
+		psc@2000 {		// PSC1
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		// PSC2 in spi master mode 
+		psc@2200 {		// PSC2
+			compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
+			cell-index = <1>;
+		};
+
+		psc@2400 {		// PSC3
+			status = "disabled";
+		};
+
+		psc@2600 {		// PSC4
+			status = "disabled";
+		};
+
+		psc@2800 {		// PSC5
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2c00 {		// PSC6
+			status = "disabled";
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@2 {
+				reg = <2>;
+			};
+		};
+
+		i2c@3d00 {
+			status = "disabled";
+		};
+
+		i2c@3d40 {
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	pci@f0000d00 {
+		status = "disabled";
+	};
+
+	localbus {
+		ranges = <0 0 0xff000000 0x01000000
+			  1 0 0x50000000 0x00010000
+			  2 0 0x50010000 0x00010000
+			  3 0 0x50020000 0x00010000>;
+
+		// 8-bit DualPort SRAM on LocalPlus Bus CS1
+		kollmorgen@1,0 {
+			compatible = "promess,motionpro-kollmorgen";
+			reg = <1 0 0x10000>;
+			interrupts = <1 1 0>;
+		};
+
+		// 8-bit board CPLD on LocalPlus Bus CS2
+		cpld@2,0 {
+			compatible = "promess,motionpro-cpld";
+			reg = <2 0 0x10000>;
+		};
+
+		// 8-bit custom Anybus Module on LocalPlus Bus CS3
+		anybus@3,0 {
+			compatible = "promess,motionpro-anybus";
+			reg = <3 0 0x10000>;
+		};
+		pro_module_general@3,0 {
+			compatible = "promess,pro_module_general";
+			reg = <3 0 3>;
+		};
+		pro_module_dio@3,800 {
+			compatible = "promess,pro_module_dio";
+			reg = <3 0x800 2>;
+		};
+
+		// 16-bit flash device at LocalPlus Bus CS0
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x01000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
+
+	};
+};
diff --git a/src/powerpc/mpc5121.dtsi b/src/powerpc/mpc5121.dtsi
new file mode 100644
index 000000000000..a015e450437a
--- /dev/null
+++ b/src/powerpc/mpc5121.dtsi
@@ -0,0 +1,530 @@
+/*
+ * base MPC5121 Device Tree Source
+ *
+ * Copyright 2007-2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <dt-bindings/clock/mpc512x-clock.h>
+
+/dts-v1/;
+
+/ {
+	model = "mpc5121";
+	compatible = "fsl,mpc5121";
+	#address-cells = <1>;
+	#size-cells = <1>;
+        interrupt-parent = <&ipic>;
+
+	aliases {
+		ethernet0 = &eth0;
+		pci = &pci;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5121@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <0x20>;	/* 32 bytes */
+			i-cache-line-size = <0x20>;	/* 32 bytes */
+			d-cache-size = <0x8000>;	/* L1, 32K */
+			i-cache-size = <0x8000>;	/* L1, 32K */
+			timebase-frequency = <49500000>;/* 49.5 MHz (csb/4) */
+			bus-frequency = <198000000>;	/* 198 MHz csb bus */
+			clock-frequency = <396000000>;	/* 396 MHz ppc core */
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;	/* 256MB at 0 */
+	};
+
+	mbx@20000000 {
+		compatible = "fsl,mpc5121-mbx";
+		reg = <0x20000000 0x4000>;
+		interrupts = <66 0x8>;
+		clocks = <&clks MPC512x_CLK_MBX_BUS>,
+			 <&clks MPC512x_CLK_MBX_3D>,
+			 <&clks MPC512x_CLK_MBX>;
+		clock-names = "mbx-bus", "mbx-3d", "mbx";
+	};
+
+	sram@30000000 {
+		compatible = "fsl,mpc5121-sram";
+		reg = <0x30000000 0x20000>;	/* 128K at 0x30000000 */
+	};
+
+	nfc@40000000 {
+		compatible = "fsl,mpc5121-nfc";
+		reg = <0x40000000 0x100000>;	/* 1M at 0x40000000 */
+		interrupts = <6 8>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&clks MPC512x_CLK_NFC>;
+		clock-names = "ipg";
+	};
+
+	localbus@80000020 {
+		compatible = "fsl,mpc5121-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0x80000020 0x40>;
+		ranges = <0x0 0x0 0xfc000000 0x04000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc: osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <33000000>;
+		};
+	};
+
+	soc@80000000 {
+		compatible = "fsl,mpc5121-immr";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x80000000 0x400000>;
+		reg = <0x80000000 0x400000>;
+		bus-frequency = <66000000>;	/* 66 MHz ips bus */
+
+
+		/*
+		 * IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@c00 {
+			compatible = "fsl,mpc5121-ipic", "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0xc00 0x100>;
+		};
+
+		/* Watchdog timer */
+		wdt@900 {
+			compatible = "fsl,mpc5121-wdt";
+			reg = <0x900 0x100>;
+		};
+
+		/* Real time clock */
+		rtc@a00 {
+			compatible = "fsl,mpc5121-rtc";
+			reg = <0xa00 0x100>;
+			interrupts = <79 0x8 80 0x8>;
+		};
+
+		/* Reset module */
+		reset@e00 {
+			compatible = "fsl,mpc5121-reset";
+			reg = <0xe00 0x100>;
+		};
+
+		/* Clock control */
+		clks: clock@f00 {
+			compatible = "fsl,mpc5121-clock";
+			reg = <0xf00 0x100>;
+			#clock-cells = <1>;
+			clocks = <&osc>;
+			clock-names = "osc";
+		};
+
+		/* Power Management Controller */
+		pmc@1000{
+			compatible = "fsl,mpc5121-pmc";
+			reg = <0x1000 0x100>;
+			interrupts = <83 0x8>;
+		};
+
+		gpio@1100 {
+			compatible = "fsl,mpc5121-gpio";
+			reg = <0x1100 0x100>;
+			interrupts = <78 0x8>;
+		};
+
+		can@1300 {
+			compatible = "fsl,mpc5121-mscan";
+			reg = <0x1300 0x80>;
+			interrupts = <12 0x8>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN0_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
+		};
+
+		can@1380 {
+			compatible = "fsl,mpc5121-mscan";
+			reg = <0x1380 0x80>;
+			interrupts = <13 0x8>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN1_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
+		};
+
+		sdhc@1500 {
+			compatible = "fsl,mpc5121-sdhc";
+			reg = <0x1500 0x100>;
+			interrupts = <8 0x8>;
+			dmas = <&dma0 30>;
+			dma-names = "rx-tx";
+			clocks = <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SDHC>;
+			clock-names = "ipg", "per";
+		};
+
+		i2c@1700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1700 0x20>;
+			interrupts = <9 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
+		};
+
+		i2c@1720 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1720 0x20>;
+			interrupts = <10 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
+		};
+
+		i2c@1740 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1740 0x20>;
+			interrupts = <11 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
+		};
+
+		i2ccontrol@1760 {
+			compatible = "fsl,mpc5121-i2c-ctrl";
+			reg = <0x1760 0x8>;
+		};
+
+		axe@2000 {
+			compatible = "fsl,mpc5121-axe";
+			reg = <0x2000 0x100>;
+			interrupts = <42 0x8>;
+			clocks = <&clks MPC512x_CLK_AXE>;
+			clock-names = "ipg";
+		};
+
+		display@2100 {
+			compatible = "fsl,mpc5121-diu";
+			reg = <0x2100 0x100>;
+			interrupts = <64 0x8>;
+			clocks = <&clks MPC512x_CLK_DIU>;
+			clock-names = "ipg";
+		};
+
+		can@2300 {
+			compatible = "fsl,mpc5121-mscan";
+			reg = <0x2300 0x80>;
+			interrupts = <90 0x8>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN2_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
+		};
+
+		can@2380 {
+			compatible = "fsl,mpc5121-mscan";
+			reg = <0x2380 0x80>;
+			interrupts = <91 0x8>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN3_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
+		};
+
+		viu@2400 {
+			compatible = "fsl,mpc5121-viu";
+			reg = <0x2400 0x400>;
+			interrupts = <67 0x8>;
+			clocks = <&clks MPC512x_CLK_VIU>;
+			clock-names = "ipg";
+		};
+
+		mdio@2800 {
+			compatible = "fsl,mpc5121-fec-mdio";
+			reg = <0x2800 0x800>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clks MPC512x_CLK_FEC>;
+			clock-names = "per";
+		};
+
+		eth0: ethernet@2800 {
+			device_type = "network";
+			compatible = "fsl,mpc5121-fec";
+			reg = <0x2800 0x800>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <4 0x8>;
+			clocks = <&clks MPC512x_CLK_FEC>;
+			clock-names = "per";
+		};
+
+		/* USB1 using external ULPI PHY */
+		usb@3000 {
+			compatible = "fsl,mpc5121-usb2-dr";
+			reg = <0x3000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <43 0x8>;
+			dr_mode = "otg";
+			phy_type = "ulpi";
+			clocks = <&clks MPC512x_CLK_USB1>;
+			clock-names = "ipg";
+		};
+
+		/* USB0 using internal UTMI PHY */
+		usb@4000 {
+			compatible = "fsl,mpc5121-usb2-dr";
+			reg = <0x4000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <44 0x8>;
+			dr_mode = "otg";
+			phy_type = "utmi_wide";
+			clocks = <&clks MPC512x_CLK_USB2>;
+			clock-names = "ipg";
+		};
+
+		/* IO control */
+		ioctl@a000 {
+			compatible = "fsl,mpc5121-ioctl";
+			reg = <0xA000 0x1000>;
+		};
+
+		/* LocalPlus controller */
+		lpc@10000 {
+			compatible = "fsl,mpc5121-lpc";
+			reg = <0x10000 0x100>;
+		};
+
+		sclpc@10100 {
+			compatible = "fsl,mpc512x-lpbfifo";
+			reg = <0x10100 0x50>;
+			interrupts = <7 0x8>;
+			dmas = <&dma0 26>;
+			dma-names = "rx-tx";
+		};
+
+		pata@10200 {
+			compatible = "fsl,mpc5121-pata";
+			reg = <0x10200 0x100>;
+			interrupts = <5 0x8>;
+			clocks = <&clks MPC512x_CLK_PATA>;
+			clock-names = "ipg";
+		};
+
+		/* 512x PSCs are not 52xx PSC compatible */
+
+		/* PSC0 */
+		psc@11000 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11000 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC0>,
+				 <&clks MPC512x_CLK_PSC0_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		/* PSC1 */
+		psc@11100 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11100 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC1>,
+				 <&clks MPC512x_CLK_PSC1_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		/* PSC2 */
+		psc@11200 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11200 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC2>,
+				 <&clks MPC512x_CLK_PSC2_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		/* PSC3 */
+		psc@11300 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			reg = <0x11300 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC3>,
+				 <&clks MPC512x_CLK_PSC3_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		/* PSC4 */
+		psc@11400 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			reg = <0x11400 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC4>,
+				 <&clks MPC512x_CLK_PSC4_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		/* PSC5 */
+		psc@11500 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11500 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC5>,
+				 <&clks MPC512x_CLK_PSC5_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		/* PSC6 */
+		psc@11600 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11600 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC6>,
+				 <&clks MPC512x_CLK_PSC6_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		/* PSC7 */
+		psc@11700 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11700 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC7>,
+				 <&clks MPC512x_CLK_PSC7_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		/* PSC8 */
+		psc@11800 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11800 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC8>,
+				 <&clks MPC512x_CLK_PSC8_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		/* PSC9 */
+		psc@11900 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11900 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC9>,
+				 <&clks MPC512x_CLK_PSC9_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		/* PSC10 */
+		psc@11a00 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11a00 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC10>,
+				 <&clks MPC512x_CLK_PSC10_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		/* PSC11 */
+		psc@11b00 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11b00 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC11>,
+				 <&clks MPC512x_CLK_PSC11_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		pscfifo@11f00 {
+			compatible = "fsl,mpc5121-psc-fifo";
+			reg = <0x11f00 0x100>;
+			interrupts = <40 0x8>;
+			clocks = <&clks MPC512x_CLK_PSC_FIFO>;
+			clock-names = "ipg";
+		};
+
+		dma0: dma@14000 {
+			compatible = "fsl,mpc5121-dma";
+			reg = <0x14000 0x1800>;
+			interrupts = <65 0x8>;
+			#dma-cells = <1>;
+		};
+	};
+
+	pci: pci@80008500 {
+		compatible = "fsl,mpc5121-pci";
+		device_type = "pci";
+		interrupts = <1 0x8>;
+		clock-frequency = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		clocks = <&clks MPC512x_CLK_PCI>;
+		clock-names = "ipg";
+
+		reg = <0x80008500 0x100	/* internal registers */
+		       0x80008300 0x8>;	/* config space access registers */
+		bus-range = <0x0 0x0>;
+		ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>;
+	};
+};
diff --git a/src/powerpc/mpc5121ads.dts b/src/powerpc/mpc5121ads.dts
new file mode 100644
index 000000000000..75888ce2c792
--- /dev/null
+++ b/src/powerpc/mpc5121ads.dts
@@ -0,0 +1,178 @@
+/*
+ * MPC5121E ADS Device Tree Source
+ *
+ * Copyright 2007-2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <mpc5121.dtsi>
+
+/ {
+	model = "mpc5121ads";
+	compatible = "fsl,mpc5121ads", "fsl,mpc5121";
+
+	nfc@40000000 {
+		/*
+		 * ADS has two Hynix 512MB Nand flash chips in a single
+		 * stacked package.
+		 */
+		chips = <2>;
+
+		nand@0 {
+			label = "nand";
+			reg = <0x00000000 0x40000000>;	/* 512MB + 512MB */
+		};
+	};
+
+	localbus@80000020 {
+		ranges = <0x0 0x0 0xfc000000 0x04000000
+			  0x2 0x0 0x82000000 0x00008000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0x0 0x4000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <4>;
+			device-width = <2>;
+
+			protected@0 {
+				label = "protected";
+				reg = <0x00000000 0x00040000>;  // first sector is protected
+				read-only;
+			};
+			filesystem@40000 {
+				label = "filesystem";
+				reg = <0x00040000 0x03c00000>;  // 60M for filesystem
+			};
+			kernel@3c40000 {
+				label = "kernel";
+				reg = <0x03c40000 0x00280000>;  // 2.5M for kernel
+			};
+			device-tree@3ec0000 {
+				label = "device-tree";
+				reg = <0x03ec0000 0x00040000>;  // one sector for device tree
+			};
+			u-boot@3f00000 {
+				label = "u-boot";
+				reg = <0x03f00000 0x00100000>;  // 1M for u-boot
+				read-only;
+			};
+		};
+
+		board-control@2,0 {
+			compatible = "fsl,mpc5121ads-cpld";
+			reg = <0x2 0x0 0x8000>;
+		};
+
+		cpld_pic: pic@2,a {
+			compatible = "fsl,mpc5121ads-cpld-pic";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x2 0xa 0x5>;
+			/* irq routing:
+			 * all irqs but touch screen are routed to irq0 (ipic 48)
+			 * touch screen is statically routed to irq1 (ipic 17)
+			 * so don't use it here
+			 */
+			interrupts = <48 0x8>;
+		};
+	};
+
+	soc@80000000 {
+
+		i2c@1700 {
+			fsl,preserve-clocking;
+
+			hwmon@4a {
+				compatible = "adi,ad7414";
+				reg = <0x4a>;
+			};
+
+			eeprom@50 {
+				compatible = "at,24c32";
+				reg = <0x50>;
+			};
+
+			rtc@68 {
+				compatible = "st,m41t62";
+				reg = <0x68>;
+			};
+		};
+
+		eth0: ethernet@2800 {
+			phy-handle = <&phy0>;
+		};
+
+		can@2300 {
+			status = "disabled";
+		};
+
+		can@2380 {
+			status = "disabled";
+		};
+
+		viu@2400 {
+			status = "disabled";
+		};
+
+		mdio@2800 {
+			phy0: ethernet-phy@0 {
+				reg = <1>;
+			};
+		};
+
+		/* mpc5121ads only uses USB0 */
+		usb@3000 {
+			status = "disabled";
+		};
+
+		/* USB0 using internal UTMI PHY */
+		usb@4000 {
+			dr_mode = "host";
+			fsl,invert-drvvbus;
+			fsl,invert-pwr-fault;
+		};
+
+		/* PSC3 serial port A aka ttyPSC0 */
+		psc@11300 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+		};
+
+		/* PSC4 serial port B aka ttyPSC1 */
+		psc@11400 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+		};
+
+		/* PSC5 in ac97 mode */
+		ac97: psc@11500 {
+			compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc";
+			fsl,mode = "ac97-slave";
+			fsl,rx-fifo-size = <384>;
+			fsl,tx-fifo-size = <384>;
+		};
+	};
+
+	pci: pci@80008500 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 0x15 - Slot 1 PCI */
+				 0xa800 0x0 0x0 0x1 &cpld_pic 0x0 0x8
+				 0xa800 0x0 0x0 0x2 &cpld_pic 0x1 0x8
+				 0xa800 0x0 0x0 0x3 &cpld_pic 0x2 0x8
+				 0xa800 0x0 0x0 0x4 &cpld_pic 0x3 0x8
+
+				/* IDSEL 0x16 - Slot 2 MiniPCI */
+				 0xb000 0x0 0x0 0x1 &cpld_pic 0x4 0x8
+				 0xb000 0x0 0x0 0x2 &cpld_pic 0x5 0x8
+
+				/* IDSEL 0x17 - Slot 3 MiniPCI */
+				 0xb800 0x0 0x0 0x1 &cpld_pic 0x6 0x8
+				 0xb800 0x0 0x0 0x2 &cpld_pic 0x7 0x8
+				>;
+	};
+};
diff --git a/src/powerpc/mpc5125twr.dts b/src/powerpc/mpc5125twr.dts
new file mode 100644
index 000000000000..898eb58e49dd
--- /dev/null
+++ b/src/powerpc/mpc5125twr.dts
@@ -0,0 +1,297 @@
+/*
+ * STx/Freescale ADS5125 MPC5125 silicon
+ *
+ * Copyright (C) 2009 Freescale Semiconductor Inc. All rights reserved.
+ *
+ * Reworked by Matteo Facchinetti (engineering@sirius-es.it)
+ * Copyright (C) 2013 Sirius Electronic Systems
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <dt-bindings/clock/mpc512x-clock.h>
+
+/dts-v1/;
+
+/ {
+	model = "mpc5125twr"; // In BSP "mpc5125ads"
+	compatible = "fsl,mpc5125ads", "fsl,mpc5125";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&ipic>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		ethernet0 = &eth0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5125@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <0x20>;	// 32 bytes
+			i-cache-line-size = <0x20>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
+			bus-frequency = <198000000>;	// 198 MHz csb bus
+			clock-frequency = <396000000>;	// 396 MHz ppc core
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;	// 256MB at 0
+	};
+
+	sram@30000000 {
+		compatible = "fsl,mpc5121-sram";
+		reg = <0x30000000 0x08000>;		// 32K at 0x30000000
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc: osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <33000000>;
+		};
+	};
+
+	soc@80000000 {
+		compatible = "fsl,mpc5121-immr";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x80000000 0x400000>;
+		reg = <0x80000000 0x400000>;
+		bus-frequency = <66000000>;	// 66 MHz ips bus
+
+		// IPIC
+		// interrupts cell = <intr #, sense>
+		// sense values match linux IORESOURCE_IRQ_* defines:
+		// sense == 8: Level, low assertion
+		// sense == 2: Edge, high-to-low change
+		//
+		ipic: interrupt-controller@c00 {
+			compatible = "fsl,mpc5121-ipic", "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0xc00 0x100>;
+		};
+
+		rtc@a00 {	// Real time clock
+			compatible = "fsl,mpc5121-rtc";
+			reg = <0xa00 0x100>;
+			interrupts = <79 0x8 80 0x8>;
+		};
+
+		reset@e00 {	// Reset module
+			compatible = "fsl,mpc5125-reset";
+			reg = <0xe00 0x100>;
+		};
+
+		clks: clock@f00 {	// Clock control
+			compatible = "fsl,mpc5121-clock";
+			reg = <0xf00 0x100>;
+			#clock-cells = <1>;
+			clocks = <&osc>;
+			clock-names = "osc";
+		};
+
+		pmc@1000{  // Power Management Controller
+			compatible = "fsl,mpc5121-pmc";
+			reg = <0x1000 0x100>;
+			interrupts = <83 0x2>;
+		};
+
+		gpio0: gpio@1100 {
+			compatible = "fsl,mpc5125-gpio";
+			reg = <0x1100 0x080>;
+			interrupts = <78 0x8>;
+		};
+
+		gpio1: gpio@1180 {
+			compatible = "fsl,mpc5125-gpio";
+			reg = <0x1180 0x080>;
+			interrupts = <86 0x8>;
+		};
+
+		can@1300 { // CAN rev.2
+			compatible = "fsl,mpc5121-mscan";
+			interrupts = <12 0x8>;
+			reg = <0x1300 0x80>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN0_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
+		};
+
+		can@1380 {
+			compatible = "fsl,mpc5121-mscan";
+			interrupts = <13 0x8>;
+			reg = <0x1380 0x80>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN1_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
+		};
+
+		sdhc@1500 {
+			compatible = "fsl,mpc5121-sdhc";
+			interrupts = <8 0x8>;
+			reg = <0x1500 0x100>;
+			clocks = <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SDHC>;
+			clock-names = "ipg", "per";
+		};
+
+		i2c@1700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1700 0x20>;
+			interrupts = <0x9 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
+		};
+
+		i2c@1720 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1720 0x20>;
+			interrupts = <0xa 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
+		};
+
+		i2c@1740 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1740 0x20>;
+			interrupts = <0xb 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
+		};
+
+		i2ccontrol@1760 {
+			compatible = "fsl,mpc5121-i2c-ctrl";
+			reg = <0x1760 0x8>;
+		};
+
+		diu@2100 {
+			compatible = "fsl,mpc5121-diu";
+			reg = <0x2100 0x100>;
+			interrupts = <64 0x8>;
+			clocks = <&clks MPC512x_CLK_DIU>;
+			clock-names = "ipg";
+		};
+
+		mdio@2800 {
+			compatible = "fsl,mpc5121-fec-mdio";
+			reg = <0x2800 0x800>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy0: ethernet-phy@0 {
+				reg = <1>;
+			};
+		};
+
+		eth0: ethernet@2800 {
+			compatible = "fsl,mpc5125-fec";
+			reg = <0x2800 0x800>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <4 0x8>;
+			phy-handle = < &phy0 >;
+			phy-connection-type = "rmii";
+			clocks = <&clks MPC512x_CLK_FEC>;
+			clock-names = "per";
+		};
+
+		// IO control
+		ioctl@a000 {
+			compatible = "fsl,mpc5125-ioctl";
+			reg = <0xA000 0x1000>;
+		};
+
+		// disable USB1 port
+		// TODO:
+		// correct pinmux config and fix USB3320 ulpi dependency
+		// before re-enabling it
+		usb@3000 {
+			compatible = "fsl,mpc5121-usb2-dr";
+			reg = <0x3000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <43 0x8>;
+			dr_mode = "host";
+			phy_type = "ulpi";
+			clocks = <&clks MPC512x_CLK_USB1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		sclpc@10100 {
+			compatible = "fsl,mpc512x-lpbfifo";
+			reg = <0x10100 0x50>;
+			interrupts = <7 0x8>;
+			dmas = <&dma0 26>;
+			dma-names = "rx-tx";
+		};
+
+		// 5125 PSCs are not 52xx or 5121 PSC compatible
+		// PSC1 uart0 aka ttyPSC0
+		serial@11100 {
+			compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc";
+			reg = <0x11100 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC1>,
+				 <&clks MPC512x_CLK_PSC1_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		// PSC9 uart1 aka ttyPSC1
+		serial@11900 {
+			compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc";
+			reg = <0x11900 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC9>,
+				 <&clks MPC512x_CLK_PSC9_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		pscfifo@11f00 {
+			compatible = "fsl,mpc5121-psc-fifo";
+			reg = <0x11f00 0x100>;
+			interrupts = <40 0x8>;
+			clocks = <&clks MPC512x_CLK_PSC_FIFO>;
+			clock-names = "ipg";
+		};
+
+		dma0: dma@14000 {
+			compatible = "fsl,mpc5121-dma"; // BSP name: "mpc512x-dma2"
+			reg = <0x14000 0x1800>;
+			interrupts = <65 0x8>;
+			#dma-cells = <1>;
+		};
+	};
+};
diff --git a/src/powerpc/mpc5200b.dtsi b/src/powerpc/mpc5200b.dtsi
new file mode 100644
index 000000000000..969b2200b2f9
--- /dev/null
+++ b/src/powerpc/mpc5200b.dtsi
@@ -0,0 +1,292 @@
+/*
+ * base MPC5200b Device Tree Source
+ *
+ * Copyright (C) 2010 SecretLab
+ * Grant Likely <grant@secretlab.ca>
+ * John Bonesio <bones@secretlab.ca>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "fsl,mpc5200b";
+	compatible = "fsl,mpc5200b";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		powerpc: PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory: memory {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;	// 64MB
+	};
+
+	soc: soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200b-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>;		// from bootloader
+		system-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+		};
+
+		gpt0: timer@600 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
+			reg = <0x600 0x10>;
+			interrupts = <1 9 0>;
+			// add 'fsl,has-wdt' to enable watchdog
+		};
+
+		gpt1: timer@610 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
+			reg = <0x610 0x10>;
+			interrupts = <1 10 0>;
+		};
+
+		gpt2: timer@620 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
+			reg = <0x620 0x10>;
+			interrupts = <1 11 0>;
+		};
+
+		gpt3: timer@630 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
+			reg = <0x630 0x10>;
+			interrupts = <1 12 0>;
+		};
+
+		gpt4: timer@640 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
+			reg = <0x640 0x10>;
+			interrupts = <1 13 0>;
+		};
+
+		gpt5: timer@650 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
+			reg = <0x650 0x10>;
+			interrupts = <1 14 0>;
+		};
+
+		gpt6: timer@660 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
+			reg = <0x660 0x10>;
+			interrupts = <1 15 0>;
+		};
+
+		gpt7: timer@670 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
+			reg = <0x670 0x10>;
+			interrupts = <1 16 0>;
+		};
+
+		rtc@800 {	// Real time clock
+			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
+			reg = <0x800 0x100>;
+			interrupts = <1 5 0 1 6 0>;
+		};
+
+		can@900 {
+			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+			interrupts = <2 17 0>;
+			reg = <0x900 0x80>;
+		};
+
+		can@980 {
+			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+			interrupts = <2 18 0>;
+			reg = <0x980 0x80>;
+		};
+
+		gpio_simple: gpio@b00 {
+			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio_wkup: gpio@c00 {
+			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+			reg = <0xc00 0x40>;
+			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		spi@f00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+			reg = <0xf00 0x20>;
+			interrupts = <2 13 0 2 14 0>;
+		};
+
+		usb: usb@1000 {
+			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
+			reg = <0x1000 0xff>;
+			interrupts = <2 6 0>;
+		};
+
+		dma-controller@1200 {
+			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		psc1: psc@2000 {		// PSC1
+			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		psc2: psc@2200 {		// PSC2
+			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+			reg = <0x2200 0x100>;
+			interrupts = <2 2 0>;
+		};
+
+		psc3: psc@2400 {		// PSC3
+			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+			reg = <0x2400 0x100>;
+			interrupts = <2 3 0>;
+		};
+
+		psc4: psc@2600 {		// PSC4
+			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+			reg = <0x2600 0x100>;
+			interrupts = <2 11 0>;
+		};
+
+		psc5: psc@2800 {		// PSC5
+			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+			reg = <0x2800 0x100>;
+			interrupts = <2 12 0>;
+		};
+
+		psc6: psc@2c00 {		// PSC6
+			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+			reg = <0x2c00 0x100>;
+			interrupts = <2 4 0>;
+		};
+
+		eth0: ethernet@3000 {
+			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		sclpc@3c00 {
+			compatible = "fsl,mpc5200-lpbfifo";
+			reg = <0x3c00 0x60>;
+			interrupts = <2 23 0>;
+		};
+
+		i2c@3d00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d00 0x40>;
+			interrupts = <2 15 0>;
+		};
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	pci: pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		// interrupt-map-mask = need to add
+		// interrupt-map = need to add
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		// ranges = need to add
+	};
+
+	localbus: localbus {
+		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xfc000000 0x2000000>;
+	};
+};
diff --git a/src/powerpc/mpc7448hpc2.dts b/src/powerpc/mpc7448hpc2.dts
new file mode 100644
index 000000000000..20a0d22df473
--- /dev/null
+++ b/src/powerpc/mpc7448hpc2.dts
@@ -0,0 +1,196 @@
+/*
+ * MPC7448HPC2 (Taiga) board Device Tree Source
+ *
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
+ * 2006 Roy Zang <Roy Zang at freescale.com>.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "mpc7448hpc2";
+	compatible = "mpc74xx";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells =<0>;
+				
+		PowerPC,7448@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K bytes
+			i-cache-size = <0x8000>;		// L1, 32K bytes
+			timebase-frequency = <0>;	// 33 MHz, from uboot
+			clock-frequency = <0>;		// From U-Boot
+			bus-frequency = <0>;		// From U-Boot
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x20000000	// DDR2   512M at 0
+		       >;
+	};
+
+  	tsi108@c0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "tsi-bridge";
+		ranges = <0x0 0xc0000000 0x10000>;
+		reg = <0xc0000000 0x10000>;
+		bus-frequency = <0>;
+
+		i2c@7000 {
+			interrupt-parent = <&mpic>;
+			interrupts = <14 0>;
+			reg = <0x7000 0x400>;
+			device_type = "i2c";
+			compatible  = "tsi108-i2c";
+		};
+
+		MDIO: mdio@6000 {
+			compatible = "tsi108-mdio";
+			reg = <0x6000 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy8: ethernet-phy@8 {
+				interrupt-parent = <&mpic>;
+				interrupts = <2 1>;
+				reg = <0x8>;
+			};
+
+			phy9: ethernet-phy@9 {
+				interrupt-parent = <&mpic>;
+				interrupts = <2 1>;
+				reg = <0x9>;
+			};
+
+		};
+
+		enet0: ethernet@6200 {
+			linux,network-index = <0>;
+			#size-cells = <0>;
+			device_type = "network";
+			compatible = "tsi108-ethernet";
+			reg = <0x6000 0x200>;
+			address = [ 00 06 D2 00 00 01 ];
+			interrupts = <16 2>;
+			interrupt-parent = <&mpic>;
+			mdio-handle = <&MDIO>;
+			phy-handle = <&phy8>;
+		};
+
+		enet1: ethernet@6600 {
+			linux,network-index = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			compatible = "tsi108-ethernet";
+			reg = <0x6400 0x200>;
+			address = [ 00 06 D2 00 00 02 ];
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+			mdio-handle = <&MDIO>;
+			phy-handle = <&phy9>;
+		};
+
+		serial0: serial@7808 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x7808 0x200>;
+			clock-frequency = <1064000000>;
+			interrupts = <12 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@7c08 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x7c08 0x200>;
+			clock-frequency = <1064000000>;
+			interrupts = <13 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+	  	mpic: pic@7400 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x7400 0x400>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+		pci0: pci@1000 {
+			compatible = "tsi108-pci";
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <0x1000 0x1000>;
+			bus-range = <0 0>;
+			ranges = <0x2000000 0x0 0xe0000000 0xe0000000 0x0 0x1a000000	
+				  0x1000000 0x0 0x0 0xfa000000 0x0 0x10000>;
+			clock-frequency = <133333332>;
+			interrupt-parent = <&mpic>;
+			interrupts = <23 2>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+
+				/* IDSEL 0x11 */
+				0x800 0x0 0x0 0x1 &RT0 0x24 0x0
+				0x800 0x0 0x0 0x2 &RT0 0x25 0x0
+				0x800 0x0 0x0 0x3 &RT0 0x26 0x0
+				0x800 0x0 0x0 0x4 &RT0 0x27 0x0
+
+				/* IDSEL 0x12 */
+				0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
+				0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
+				0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
+				0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
+
+				/* IDSEL 0x13 */
+				0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
+				0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
+				0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
+				0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
+
+				/* IDSEL 0x14 */
+				0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
+				0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
+				0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
+				0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
+				>;
+
+			RT0: router@1180 {
+				clock-frequency = <0>;
+				interrupt-controller;
+				device_type = "pic-router";
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				big-endian;
+				interrupts = <23 2>;
+				interrupt-parent = <&mpic>;
+			};
+		};
+	};
+};
diff --git a/src/powerpc/mpc8272ads.dts b/src/powerpc/mpc8272ads.dts
new file mode 100644
index 000000000000..6d2cddf64cfd
--- /dev/null
+++ b/src/powerpc/mpc8272ads.dts
@@ -0,0 +1,267 @@
+/*
+ * MPC8272 ADS Device Tree Source
+ *
+ * Copyright 2005,2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "MPC8272ADS";
+	compatible = "fsl,mpc8272ads";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		serial0 = &scc1;
+		serial1 = &scc4;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8272@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	localbus@f0010100 {
+		compatible = "fsl,mpc8272-localbus",
+		             "fsl,pq2-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xf0010100 0x40>;
+
+		ranges = <0x0 0x0 0xff800000 0x00800000
+		          0x1 0x0 0xf4500000 0x8000
+		          0x3 0x0 0xf8200000 0x8000>;
+
+		flash@0,0 {
+			compatible = "jedec-flash";
+			reg = <0x0 0x0 0x00800000>;
+			bank-width = <4>;
+			device-width = <1>;
+		};
+
+		board-control@1,0 {
+			reg = <0x1 0x0 0x20>;
+			compatible = "fsl,mpc8272ads-bcsr";
+		};
+
+		PCI_PIC: interrupt-controller@3,0 {
+			compatible = "fsl,mpc8272ads-pci-pic",
+			             "fsl,pq2ads-pci-pic";
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			reg = <0x3 0x0 0x8>;
+			interrupt-parent = <&PIC>;
+			interrupts = <20 8>;
+		};
+	};
+
+
+	pci@f0010800 {
+		device_type = "pci";
+		reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>;
+		compatible = "fsl,mpc8272-pci", "fsl,pq2-pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+		                 /* IDSEL 0x16 */
+		                 0xb000 0x0 0x0 0x1 &PCI_PIC 0
+		                 0xb000 0x0 0x0 0x2 &PCI_PIC 1
+		                 0xb000 0x0 0x0 0x3 &PCI_PIC 2
+		                 0xb000 0x0 0x0 0x4 &PCI_PIC 3
+
+		                 /* IDSEL 0x17 */
+		                 0xb800 0x0 0x0 0x1 &PCI_PIC 4
+		                 0xb800 0x0 0x0 0x2 &PCI_PIC 5
+		                 0xb800 0x0 0x0 0x3 &PCI_PIC 6
+		                 0xb800 0x0 0x0 0x4 &PCI_PIC 7
+
+		                 /* IDSEL 0x18 */
+		                 0xc000 0x0 0x0 0x1 &PCI_PIC 8
+		                 0xc000 0x0 0x0 0x2 &PCI_PIC 9
+		                 0xc000 0x0 0x0 0x3 &PCI_PIC 10
+		                 0xc000 0x0 0x0 0x4 &PCI_PIC 11>;
+
+		interrupt-parent = <&PIC>;
+		interrupts = <18 8>;
+		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+		          0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+		          0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>;
+	};
+
+	soc@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8272", "fsl,pq2-soc";
+		ranges = <0x0 0xf0000000 0x53000>;
+
+		// Temporary -- will go away once kernel uses ranges for get_immrbase().
+		reg = <0xf0000000 0x53000>;
+
+		cpm@119c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8272-cpm", "fsl,cpm2";
+			reg = <0x119c0 0x30>;
+			ranges;
+
+			muram@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x0 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x2000 0x9800 0x800>;
+				};
+			};
+
+			brg@119f0 {
+				compatible = "fsl,mpc8272-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <0x119f0 0x10 0x115f0 0x10>;
+			};
+
+			scc1: serial@11a00 {
+				device_type = "serial";
+				compatible = "fsl,mpc8272-scc-uart",
+				             "fsl,cpm2-scc-uart";
+				reg = <0x11a00 0x20 0x8000 0x100>;
+				interrupts = <40 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x800000>;
+			};
+
+			scc4: serial@11a60 {
+				device_type = "serial";
+				compatible = "fsl,mpc8272-scc-uart",
+				             "fsl,cpm2-scc-uart";
+				reg = <0x11a60 0x20 0x8300 0x100>;
+				interrupts = <43 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-brg = <4>;
+				fsl,cpm-command = <0xce00000>;
+			};
+
+			usb@11b60 {
+				compatible = "fsl,mpc8272-cpm-usb";
+				reg = <0x11b60 0x40 0x8b00 0x100>;
+				interrupts = <11 8>;
+				interrupt-parent = <&PIC>;
+				mode = "peripheral";
+			};
+
+			mdio@10d40 {
+				compatible = "fsl,mpc8272ads-mdio-bitbang",
+				             "fsl,mpc8272-mdio-bitbang",
+				             "fsl,cpm2-mdio-bitbang";
+				reg = <0x10d40 0x14>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fsl,mdio-pin = <18>;
+				fsl,mdc-pin = <19>;
+
+				PHY0: ethernet-phy@0 {
+					interrupt-parent = <&PIC>;
+					interrupts = <23 8>;
+					reg = <0x0>;
+				};
+
+				PHY1: ethernet-phy@1 {
+					interrupt-parent = <&PIC>;
+					interrupts = <23 8>;
+					reg = <0x3>;
+				};
+			};
+
+			eth0: ethernet@11300 {
+				device_type = "network";
+				compatible = "fsl,mpc8272-fcc-enet",
+				             "fsl,cpm2-fcc-enet";
+				reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				interrupts = <32 8>;
+				interrupt-parent = <&PIC>;
+				phy-handle = <&PHY0>;
+				linux,network-index = <0>;
+				fsl,cpm-command = <0x12000300>;
+			};
+
+			eth1: ethernet@11320 {
+				device_type = "network";
+				compatible = "fsl,mpc8272-fcc-enet",
+				             "fsl,cpm2-fcc-enet";
+				reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				interrupts = <33 8>;
+				interrupt-parent = <&PIC>;
+				phy-handle = <&PHY1>;
+				linux,network-index = <1>;
+				fsl,cpm-command = <0x16200300>;
+			};
+
+			i2c@11860 {
+				compatible = "fsl,mpc8272-i2c",
+					     "fsl,cpm2-i2c";
+				reg = <0x11860 0x20 0x8afc 0x2>;
+				interrupts = <1 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-command = <0x29600000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		PIC: interrupt-controller@10c00 {
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0x10c00 0x80>;
+			compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic";
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec1.0";
+			reg = <0x40000 0x13000>;
+			interrupts = <47 0x8>;
+			interrupt-parent = <&PIC>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x1010415>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/soc/cpm/serial@11a00";
+	};
+};
diff --git a/src/powerpc/mpc8308_p1m.dts b/src/powerpc/mpc8308_p1m.dts
new file mode 100644
index 000000000000..57f86cdf9f36
--- /dev/null
+++ b/src/powerpc/mpc8308_p1m.dts
@@ -0,0 +1,338 @@
+/*
+ * mpc8308_p1m Device Tree Source
+ *
+ * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "denx,mpc8308_p1m";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8308@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;	// 128MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		ranges = <0x0 0x0 0xfc000000 0x04000000
+		          0x1 0x0 0xfbff0000 0x00008000
+		          0x2 0x0 0xfbff8000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x4000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			u-boot@0 {
+				reg = <0x0 0x60000>;
+				read-only;
+			};
+			env@60000 {
+				reg = <0x60000 0x20000>;
+			};
+			env1@80000 {
+				reg = <0x80000 0x20000>;
+			};
+			kernel@a0000 {
+				reg = <0xa0000 0x200000>;
+			};
+			dtb@2a0000 {
+				reg = <0x2a0000 0x20000>;
+			};
+			ramdisk@2c0000 {
+				reg = <0x2c0000 0x640000>;
+			};
+			user@700000 {
+				reg = <0x700000 0x3900000>;
+			};
+		};
+
+		can@1,0 {
+			compatible = "nxp,sja1000";
+			reg = <0x1 0x0 0x80>;
+			interrupts = <18 0x8>;
+			interrups-parent = <&ipic>;
+		};
+
+		cpld@2,0 {
+			compatible = "denx,mpc8308_p1m-cpld";
+			reg = <0x2 0x0 0x8>;
+			interrupts = <48 0x8>;
+			interrups-parent = <&ipic>;
+		};
+	};
+
+	immr@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8308-immr", "simple-bus";
+		ranges = <0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+			fram@50 {
+				compatible = "ramtron,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+			pwm@28 {
+				compatible = "maxim,ds1050";
+				reg = <0x28>;
+			};
+			sensor@48 {
+				compatible = "maxim,max6625";
+				reg = <0x48>;
+			};
+			sensor@49 {
+				compatible = "maxim,max6625";
+				reg = <0x49>;
+			};
+			sensor@4b {
+				compatible = "maxim,max6625";
+				reg = <0x4b>;
+			};
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			dr_mode = "peripheral";
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			interrupt-parent = <&ipic>;
+			phy-handle = < &phy1 >;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x1>;
+				};
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&ipic>;
+					interrupts = <19 0x8>;
+					reg = <0x2>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			interrupt-parent = <&ipic>;
+			phy-handle = < &phy2 >;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <133333333>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <133333333>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		gpio@c00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio";
+			reg = <0xc00 0x18>;
+			interrupts = <74 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		timer@500 {
+			compatible = "fsl,mpc8308-gtm", "fsl,gtm";
+			reg = <0x500 0x100>;
+			interrupts = <90 8 78 8 84 8 72 8>;
+			interrupt-parent = <&ipic>;
+			clock-frequency = <133333333>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+
+		ipic-msi@7c0 {
+			compatible = "fsl,ipic-msi";
+			reg = <0x7c0 0x40>;
+			msi-available-ranges = <0x0 0x100>;
+			interrupts = < 0x43 0x8
+					0x4  0x8
+					0x51 0x8
+					0x52 0x8
+					0x56 0x8
+					0x57 0x8
+					0x58 0x8
+					0x59 0x8 >;
+			interrupt-parent = < &ipic >;
+		};
+
+		dma@2c000 {
+			compatible = "fsl,mpc8308-dma";
+			reg = <0x2c000 0x1800>;
+			interrupts = <3 0x8
+					94 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+	};
+
+	pci0: pcie@e0009000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe0009000 0x00001000
+			0xb0000000 0x01000000>;
+		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+		          0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
+		bus-range = <0 0>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &ipic 1 8>;
+		interrupts = <0x1 0x8>;
+		interrupt-parent = <&ipic>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xa0000000
+				  0x02000000 0 0xa0000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+};
diff --git a/src/powerpc/mpc8308rdb.dts b/src/powerpc/mpc8308rdb.dts
new file mode 100644
index 000000000000..d0211f0413c6
--- /dev/null
+++ b/src/powerpc/mpc8308rdb.dts
@@ -0,0 +1,310 @@
+/*
+ * MPC8308RDB Device Tree Source
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "fsl,mpc8308rdb";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8308@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;	// 128MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		// CS0 and CS1 are swapped when
+		// booting from nand, but the
+		// addresses are the same.
+		ranges = <0x0 0x0 0xfe000000 0x00800000
+		          0x1 0x0 0xe0600000 0x00002000
+		          0x2 0x0 0xf0000000 0x00020000
+		          0x3 0x0 0xfa000000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			u-boot@0 {
+				reg = <0x0 0x60000>;
+				read-only;
+			};
+			env@60000 {
+				reg = <0x60000 0x10000>;
+			};
+			env1@70000 {
+				reg = <0x70000 0x10000>;
+			};
+			kernel@80000 {
+				reg = <0x80000 0x200000>;
+			};
+			dtb@280000 {
+				reg = <0x280000 0x10000>;
+			};
+			ramdisk@290000 {
+				reg = <0x290000 0x570000>;
+			};
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8315-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x2000>;
+
+			jffs2@0 {
+				reg = <0x0 0x2000000>;
+			};
+		};
+	};
+
+	immr@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8308-immr", "simple-bus";
+		ranges = <0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			dr_mode = "peripheral";
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = < &tbi0 >;
+			phy-handle = < &phy2 >;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x2>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = < &tbi1 >;
+			/* Vitesse 7385 isn't on the MDIO bus */
+			fixed-link = <1 1 1000 0 0>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <133333333>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <133333333>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		gpio@c00 {
+			#gpio-cells = <2>;
+			device_type = "gpio";
+			compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio";
+			reg = <0xc00 0x18>;
+			interrupts = <74 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+
+		ipic-msi@7c0 {
+			compatible = "fsl,ipic-msi";
+			reg = <0x7c0 0x40>;
+			msi-available-ranges = <0x0 0x100>;
+			interrupts = < 0x43 0x8
+					0x4  0x8
+					0x51 0x8
+					0x52 0x8
+					0x56 0x8
+					0x57 0x8
+					0x58 0x8
+					0x59 0x8 >;
+			interrupt-parent = < &ipic >;
+		};
+
+		dma@2c000 {
+			compatible = "fsl,mpc8308-dma";
+			reg = <0x2c000 0x1800>;
+			interrupts = <3 0x8
+					94 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+	};
+
+	pci0: pcie@e0009000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe0009000 0x00001000
+			0xb0000000 0x01000000>;
+		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+		          0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
+		bus-range = <0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 1 8
+				 0 0 0 2 &ipic 1 8
+				 0 0 0 3 &ipic 1 8
+				 0 0 0 4 &ipic 1 8>;
+		interrupts = <0x1 0x8>;
+		interrupt-parent = <&ipic>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xa0000000
+				  0x02000000 0 0xa0000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+};
diff --git a/src/powerpc/mpc8313erdb.dts b/src/powerpc/mpc8313erdb.dts
new file mode 100644
index 000000000000..4b635dc4ecde
--- /dev/null
+++ b/src/powerpc/mpc8313erdb.dts
@@ -0,0 +1,409 @@
+/*
+ * MPC8313E RDB Device Tree Source
+ *
+ * Copyright 2005, 2006, 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "MPC8313ERDB";
+	compatible = "MPC8313ERDB", "MPC831xRDB", "MPC83xxRDB";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8313@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;	// 128MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8313-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		// CS0 and CS1 are swapped when
+		// booting from nand, but the
+		// addresses are the same.
+		ranges = <0x0 0x0 0xfe000000 0x00800000
+		          0x1 0x0 0xe2800000 0x00008000
+		          0x2 0x0 0xf0000000 0x00020000
+		          0x3 0x0 0xfa000000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8313-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x2000>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			kernel@100000 {
+				reg = <0x100000 0x300000>;
+			};
+
+			fs@400000 {
+				reg = <0x400000 0x1c00000>;
+			};
+		};
+	};
+
+	soc8313@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		sleep-nexus {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x03000000>;
+			ranges;
+
+			i2c@3000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				compatible = "fsl-i2c";
+				reg = <0x3000 0x100>;
+				interrupts = <14 0x8>;
+				interrupt-parent = <&ipic>;
+				dfsrr;
+				rtc@68 {
+					compatible = "dallas,ds1339";
+					reg = <0x68>;
+				};
+			};
+
+			crypto@30000 {
+				compatible = "fsl,sec2.2", "fsl,sec2.1",
+				             "fsl,sec2.0";
+				reg = <0x30000 0x10000>;
+				interrupts = <11 0x8>;
+				interrupt-parent = <&ipic>;
+				fsl,num-channels = <1>;
+				fsl,channel-fifo-len = <24>;
+				fsl,exec-units-mask = <0x4c>;
+				fsl,descriptor-types-mask = <0x0122003f>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			phy_type = "utmi_wide";
+			sleep = <&pmc 0x00300000>;
+		};
+
+		ptp_clock@24E00 {
+			compatible = "fsl,etsec-ptp";
+			reg = <0x24E00 0xB0>;
+			interrupts = <12 0x8 13 0x8>;
+			interrupt-parent = < &ipic >;
+			fsl,tclk-period = <10>;
+			fsl,tmr-prsc    = <100>;
+			fsl,tmr-add     = <0x999999A4>;
+			fsl,tmr-fiper1  = <0x3B9AC9F6>;
+			fsl,tmr-fiper2  = <0x00018696>;
+			fsl,max-adj     = <659999998>;
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			sleep = <&pmc 0x20000000>;
+			ranges = <0x0 0x24000 0x1000>;
+
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 0x8 36 0x8 35 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = < &tbi0 >;
+			/* Vitesse 7385 isn't on the MDIO bus */
+			fixed-link = <1 1 1000 0 0>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+				phy4: ethernet-phy@4 {
+					interrupt-parent = <&ipic>;
+					interrupts = <20 0x8>;
+					reg = <0x4>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <34 0x8 33 0x8 32 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = < &tbi1 >;
+			phy-handle = < &phy4 >;
+			sleep = <&pmc 0x10000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+
+
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: pic@700 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 8>;
+			interrupt-parent = <&ipic>;
+			fsl,mpc8313-wakeup-timer = <&gtm1>;
+
+			/* Remove this (or change to "okay") if you have
+			 * a REVA3 or later board, if you apply one of the
+			 * workarounds listed in section 8.5 of the board
+			 * manual, or if you are adapting this device tree
+			 * to a different board.
+			 */
+			status = "fail";
+		};
+
+		gtm1: timer@500 {
+			compatible = "fsl,mpc8313-gtm", "fsl,gtm";
+			reg = <0x500 0x100>;
+			interrupts = <90 8 78 8 84 8 72 8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		timer@600 {
+			compatible = "fsl,mpc8313-gtm", "fsl,gtm";
+			reg = <0x600 0x100>;
+			interrupts = <91 8 79 8 85 8 73 8>;
+			interrupt-parent = <&ipic>;
+		};
+	};
+
+	sleep-nexus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		sleep = <&pmc 0x00010000>;
+		ranges;
+
+		pci0: pci@e0008500 {
+			cell-index = <1>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+					/* IDSEL 0x0E -mini PCI */
+					 0x7000 0x0 0x0 0x1 &ipic 18 0x8
+					 0x7000 0x0 0x0 0x2 &ipic 18 0x8
+					 0x7000 0x0 0x0 0x3 &ipic 18 0x8
+					 0x7000 0x0 0x0 0x4 &ipic 18 0x8
+
+					/* IDSEL 0x0F - PCI slot */
+					 0x7800 0x0 0x0 0x1 &ipic 17 0x8
+					 0x7800 0x0 0x0 0x2 &ipic 18 0x8
+					 0x7800 0x0 0x0 0x3 &ipic 17 0x8
+					 0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <66 0x8>;
+			bus-range = <0x0 0x0>;
+			ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+				  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+				  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+			clock-frequency = <66666666>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <0xe0008500 0x100		/* internal registers */
+			       0xe0008300 0x8>;		/* config space access registers */
+			compatible = "fsl,mpc8349-pci";
+			device_type = "pci";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8313-dma", "fsl,elo-dma";
+			reg = <0xe00082a8 4>;
+			ranges = <0 0xe0008100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+
+			dma-channel@0 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+				cell-index = <0>;
+			};
+
+			dma-channel@80 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0x80 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+				cell-index = <1>;
+			};
+
+			dma-channel@100 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0x100 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+				cell-index = <2>;
+			};
+
+			dma-channel@180 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+				cell-index = <3>;
+			};
+		};
+	};
+};
diff --git a/src/powerpc/mpc8315erdb.dts b/src/powerpc/mpc8315erdb.dts
new file mode 100644
index 000000000000..ca5139ee5074
--- /dev/null
+++ b/src/powerpc/mpc8315erdb.dts
@@ -0,0 +1,478 @@
+/*
+ * MPC8315E RDB Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "fsl,mpc8315erdb";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8315@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;	// 128MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		// CS0 and CS1 are swapped when
+		// booting from nand, but the
+		// addresses are the same.
+		ranges = <0x0 0x0 0xfe000000 0x00800000
+		          0x1 0x0 0xe0600000 0x00002000
+		          0x2 0x0 0xf0000000 0x00020000
+		          0x3 0x0 0xfa000000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8315-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x2000>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			kernel@100000 {
+				reg = <0x100000 0x300000>;
+			};
+			fs@400000 {
+				reg = <0x400000 0x1c00000>;
+			};
+		};
+	};
+
+	immr@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8315-immr", "simple-bus";
+		ranges = <0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+
+			mcu_pio: mcu@a {
+				#gpio-cells = <2>;
+				compatible = "fsl,mc9s08qg8-mpc8315erdb",
+					     "fsl,mcu-mpc8349emitx";
+				reg = <0x0a>;
+				gpio-controller;
+			};
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8315-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			phy_type = "utmi";
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = < &phy0 >;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@0 {
+					interrupt-parent = <&ipic>;
+					interrupts = <20 0x8>;
+					reg = <0x0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&ipic>;
+					interrupts = <19 0x8>;
+					reg = <0x1>;
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = < &phy1 >;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <133333333>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <133333333>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
+				     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+				     "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x97c>;
+			fsl,descriptor-types-mask = <0x3a30abf>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			cell-index = <1>;
+			interrupts = <44 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			cell-index = <2>;
+			interrupts = <45 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		gtm1: timer@500 {
+			compatible = "fsl,mpc8315-gtm", "fsl,gtm";
+			reg = <0x500 0x100>;
+			interrupts = <90 8 78 8 84 8 72 8>;
+			interrupt-parent = <&ipic>;
+			clock-frequency = <133333333>;
+		};
+
+		timer@600 {
+			compatible = "fsl,mpc8315-gtm", "fsl,gtm";
+			reg = <0x600 0x100>;
+			interrupts = <91 8 79 8 85 8 73 8>;
+			interrupt-parent = <&ipic>;
+			clock-frequency = <133333333>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@700 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+
+		ipic-msi@7c0 {
+			compatible = "fsl,ipic-msi";
+			reg = <0x7c0 0x40>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <0x43 0x8
+				      0x4  0x8
+				      0x51 0x8
+				      0x52 0x8
+				      0x56 0x8
+				      0x57 0x8
+				      0x58 0x8
+				      0x59 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8315-pmc", "fsl,mpc8313-pmc",
+				     "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 8>;
+			interrupt-parent = <&ipic>;
+			fsl,mpc8313-wakeup-timer = <&gtm1>;
+		};
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 0x0E -mini PCI */
+				 0x7000 0x0 0x0 0x1 &ipic 18 0x8
+				 0x7000 0x0 0x0 0x2 &ipic 18 0x8
+				 0x7000 0x0 0x0 0x3 &ipic 18 0x8
+				 0x7000 0x0 0x0 0x4 &ipic 18 0x8
+
+				/* IDSEL 0x0F -mini PCI */
+				 0x7800 0x0 0x0 0x1 &ipic 17 0x8
+				 0x7800 0x0 0x0 0x2 &ipic 17 0x8
+				 0x7800 0x0 0x0 0x3 &ipic 17 0x8
+				 0x7800 0x0 0x0 0x4 &ipic 17 0x8
+
+				/* IDSEL 0x10 - PCI slot */
+				 0x8000 0x0 0x0 0x1 &ipic 48 0x8
+				 0x8000 0x0 0x0 0x2 &ipic 17 0x8
+				 0x8000 0x0 0x0 0x3 &ipic 48 0x8
+				 0x8000 0x0 0x0 0x4 &ipic 17 0x8>;
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0x0 0x0>;
+		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x42000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xe0300000 0 0x00100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+
+	pci1: pcie@e0009000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe0009000 0x00001000>;
+		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+		          0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 1 8
+				 0 0 0 2 &ipic 1 8
+				 0 0 0 3 &ipic 1 8
+				 0 0 0 4 &ipic 1 8>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xa0000000
+				  0x02000000 0 0xa0000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+
+	pci2: pcie@e000a000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe000a000 0x00001000>;
+		ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xd1000000 0 0x00800000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 2 8
+				 0 0 0 2 &ipic 2 8
+				 0 0 0 3 &ipic 2 8
+				 0 0 0 4 &ipic 2 8>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xc0000000
+				  0x02000000 0 0xc0000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			gpios = <&mcu_pio 0 0>;
+			default-state = "on";
+		};
+
+		hdd {
+			gpios = <&mcu_pio 1 0>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+};
diff --git a/src/powerpc/mpc832x_mds.dts b/src/powerpc/mpc832x_mds.dts
new file mode 100644
index 000000000000..0793cdf0d46e
--- /dev/null
+++ b/src/powerpc/mpc832x_mds.dts
@@ -0,0 +1,439 @@
+/*
+ * MPC8323E EMDS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+
+ * To enable external serial I/O on a Freescale MPC 8323 SYS/MDS board, do
+ * this:
+ *
+ * 1) On chip U61, lift (disconnect) pins 21 (TXD) and 22 (RXD) from the board.
+ * 2) Solder a wire from U61-21 to P19A-23.  P19 is a grid of pins on the board
+ *    next to the serial ports.
+ * 3) Solder a wire from U61-22 to P19K-22.
+ *
+ * Note that there's a typo in the schematic.  The board labels the last column
+ * of pins "P19K", but in the schematic, that column is called "P19J".  So if
+ * you're going by the schematic, the pin is called "P19J-K22".
+ */
+
+/dts-v1/;
+
+/ {
+	model = "MPC8323EMDS";
+	compatible = "MPC8323EMDS", "MPC832xMDS", "MPC83xxMDS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8323@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <16384>;		// L1, 16K
+			i-cache-size = <16384>;		// L1, 16K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	bcsr@f8000000 {
+		compatible = "fsl,mpc8323mds-bcsr";
+		reg = <0xf8000000 0x8000>;
+	};
+
+	soc8323@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <132000000>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <1>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x4c>;
+			fsl,descriptor-types-mask = <0x0122003f>;
+			sleep = <&pmc 0x03000000>;
+		};
+
+		ipic: pic@700 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+
+		par_io@1400 {
+			reg = <0x1400 0x100>;
+			device_type = "par_io";
+			num-ports = <7>;
+
+			pio3: ucc_pin@03 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					3  4  3  0  2  0  /* MDIO */
+					3  5  1  0  2  0  /* MDC */
+					0 13  2  0  1  0 	/* RX_CLK (CLK9) */
+					3 24  2  0  1  0 	/* TX_CLK (CLK10) */
+					1  0  1  0  1  0 	/* TxD0 */
+					1  1  1  0  1  0 	/* TxD1 */
+					1  2  1  0  1  0 	/* TxD2 */
+					1  3  1  0  1  0 	/* TxD3 */
+					1  4  2  0  1  0 	/* RxD0 */
+					1  5  2  0  1  0 	/* RxD1 */
+					1  6  2  0  1  0 	/* RxD2 */
+					1  7  2  0  1  0 	/* RxD3 */
+					1  8  2  0  1  0 	/* RX_ER */
+					1  9  1  0  1  0 	/* TX_ER */
+					1 10  2  0  1  0 	/* RX_DV */
+					1 11  2  0  1  0 	/* COL */
+					1 12  1  0  1  0 	/* TX_EN */
+					1 13  2  0  1  0>;	/* CRS */
+			};
+			pio4: ucc_pin@04 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					3 31  2  0  1  0 	/* RX_CLK (CLK7) */
+					3  6  2  0  1  0 	/* TX_CLK (CLK8) */
+					1 18  1  0  1  0 	/* TxD0 */
+					1 19  1  0  1  0 	/* TxD1 */
+					1 20  1  0  1  0 	/* TxD2 */
+					1 21  1  0  1  0 	/* TxD3 */
+					1 22  2  0  1  0 	/* RxD0 */
+					1 23  2  0  1  0 	/* RxD1 */
+					1 24  2  0  1  0 	/* RxD2 */
+					1 25  2  0  1  0 	/* RxD3 */
+					1 26  2  0  1  0 	/* RX_ER */
+					1 27  1  0  1  0 	/* TX_ER */
+					1 28  2  0  1  0 	/* RX_DV */
+					1 29  2  0  1  0 	/* COL */
+					1 30  1  0  1  0 	/* TX_EN */
+					1 31  2  0  1  0>;	/* CRS */
+			};
+			pio5: ucc_pin@05 {
+				pio-map = <
+				/*
+				 *    		      open       has
+				 *   port  pin  dir  drain  sel  irq
+				 */
+					2    0    1      0    2    0  /* TxD5 */
+					2    8    2      0    2    0  /* RxD5 */
+
+					2   29    2      0    0    0  /* CTS5 */
+					2   31    1      0    2    0  /* RTS5 */
+
+					2   24    2      0    0    0  /* CD */
+
+				>;
+			};
+
+		};
+	};
+
+	qe@e0100000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "qe";
+		compatible = "fsl,qe";
+		ranges = <0x0 0xe0100000 0x00100000>;
+		reg = <0xe0100000 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <198000000>;
+		fsl,qe-num-riscs = <1>;
+		fsl,qe-num-snums = <28>;
+
+		muram@10000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,qe-muram", "fsl,cpm-muram";
+			ranges = <0x0 0x00010000 0x00004000>;
+
+			data-only@0 {
+				compatible = "fsl,qe-muram-data",
+					     "fsl,cpm-muram-data";
+				reg = <0x0 0x4000>;
+			};
+		};
+
+		spi@4c0 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x4c0 0x40>;
+			interrupts = <2>;
+			interrupt-parent = <&qeic>;
+			mode = "cpu";
+		};
+
+		spi@500 {
+			cell-index = <1>;
+			compatible = "fsl,spi";
+			reg = <0x500 0x40>;
+			interrupts = <1>;
+			interrupt-parent = <&qeic>;
+			mode = "cpu";
+		};
+
+		usb@6c0 {
+			compatible = "qe_udc";
+			reg = <0x6c0 0x40 0x8b00 0x100>;
+			interrupts = <11>;
+			interrupt-parent = <&qeic>;
+			mode = "slave";
+		};
+
+		enet0: ucc@2200 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <3>;
+			reg = <0x2200 0x200>;
+			interrupts = <34>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "clk9";
+			tx-clock-name = "clk10";
+			phy-handle = <&phy3>;
+			pio-handle = <&pio3>;
+		};
+
+		enet1: ucc@3200 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <4>;
+			reg = <0x3200 0x200>;
+			interrupts = <35>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "clk7";
+			tx-clock-name = "clk8";
+			phy-handle = <&phy4>;
+			pio-handle = <&pio4>;
+		};
+
+		ucc@2400 {
+			device_type = "serial";
+			compatible = "ucc_uart";
+			cell-index = <5>;	/* The UCC number, 1-7*/
+			port-number = <0>;	/* Which ttyQEx device */
+			soft-uart;		/* We need Soft-UART */
+			reg = <0x2400 0x200>;
+			interrupts = <40>;	/* From Table 18-12 */
+			interrupt-parent = < &qeic >;
+			/*
+			 * For Soft-UART, we need to set TX to 1X, which
+			 * means specifying separate clock sources.
+			 */
+			rx-clock-name = "brg5";
+			tx-clock-name = "brg6";
+			pio-handle = < &pio5 >;
+		};
+
+
+		mdio@2320 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2320 0x18>;
+			compatible = "fsl,ucc-mdio";
+
+			phy3: ethernet-phy@03 {
+				interrupt-parent = <&ipic>;
+				interrupts = <17 0x8>;
+				reg = <0x3>;
+			};
+			phy4: ethernet-phy@04 {
+				interrupt-parent = <&ipic>;
+				interrupts = <18 0x8>;
+				reg = <0x4>;
+			};
+		};
+
+		qeic: interrupt-controller@80 {
+			interrupt-controller;
+			compatible = "fsl,qe-ic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <0x80 0x80>;
+			big-endian;
+			interrupts = <32 0x8 33 0x8>; //high:32 low:33
+			interrupt-parent = <&ipic>;
+		};
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 0x11 AD17 */
+				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
+				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
+				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
+				 0x8800 0x0 0x0 0x4 &ipic 23 0x8
+
+				/* IDSEL 0x12 AD18 */
+				 0x9000 0x0 0x0 0x1 &ipic 22 0x8
+				 0x9000 0x0 0x0 0x2 &ipic 23 0x8
+				 0x9000 0x0 0x0 0x3 &ipic 20 0x8
+				 0x9000 0x0 0x0 0x4 &ipic 21 0x8
+
+				/* IDSEL 0x13 AD19 */
+				 0x9800 0x0 0x0 0x1 &ipic 23 0x8
+				 0x9800 0x0 0x0 0x2 &ipic 20 0x8
+				 0x9800 0x0 0x0 0x3 &ipic 21 0x8
+				 0x9800 0x0 0x0 0x4 &ipic 22 0x8
+
+				/* IDSEL 0x15 AD21*/
+				 0xa800 0x0 0x0 0x1 &ipic 20 0x8
+				 0xa800 0x0 0x0 0x2 &ipic 21 0x8
+				 0xa800 0x0 0x0 0x3 &ipic 22 0x8
+				 0xa800 0x0 0x0 0x4 &ipic 23 0x8
+
+				/* IDSEL 0x16 AD22*/
+				 0xb000 0x0 0x0 0x1 &ipic 23 0x8
+				 0xb000 0x0 0x0 0x2 &ipic 20 0x8
+				 0xb000 0x0 0x0 0x3 &ipic 21 0x8
+				 0xb000 0x0 0x0 0x4 &ipic 22 0x8
+
+				/* IDSEL 0x17 AD23*/
+				 0xb800 0x0 0x0 0x1 &ipic 22 0x8
+				 0xb800 0x0 0x0 0x2 &ipic 23 0x8
+				 0xb800 0x0 0x0 0x3 &ipic 20 0x8
+				 0xb800 0x0 0x0 0x4 &ipic 21 0x8
+
+				/* IDSEL 0x18 AD24*/
+				 0xc000 0x0 0x0 0x1 &ipic 21 0x8
+				 0xc000 0x0 0x0 0x2 &ipic 22 0x8
+				 0xc000 0x0 0x0 0x3 &ipic 23 0x8
+				 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0x0 0x0>;
+		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+			  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xd0000000 0x0 0x00100000>;
+		clock-frequency = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+		sleep = <&pmc 0x00010000>;
+	};
+};
diff --git a/src/powerpc/mpc832x_rdb.dts b/src/powerpc/mpc832x_rdb.dts
new file mode 100644
index 000000000000..91df1eb16667
--- /dev/null
+++ b/src/powerpc/mpc832x_rdb.dts
@@ -0,0 +1,371 @@
+/*
+ * MPC832x RDB Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "MPC8323ERDB";
+	compatible = "MPC8323ERDB", "MPC832xRDB", "MPC83xxRDB";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet1;
+		ethernet1 = &enet0;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8323@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <0x20>;	// 32 bytes
+			i-cache-line-size = <0x20>;	// 32 bytes
+			d-cache-size = <16384>;	// L1, 16K
+			i-cache-size = <16384>;	// L1, 16K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;
+	};
+
+	soc8323@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <1>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x4c>;
+			fsl,descriptor-types-mask = <0x0122003f>;
+			sleep = <&pmc 0x03000000>;
+		};
+
+		ipic:pic@700 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+
+		par_io@1400 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x1400 0x100>;
+			ranges = <3 0x1448 0x18>;
+			compatible = "fsl,mpc8323-qe-pario";
+			device_type = "par_io";
+			num-ports = <7>;
+
+			qe_pio_d: gpio-controller@1448 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8323-qe-pario-bank";
+				reg = <3 0x18>;
+				gpio-controller;
+			};
+
+			ucc2pio:ucc_pin@02 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					3  4  3  0  2  0 	/* MDIO */
+					3  5  1  0  2  0 	/* MDC */
+					3 21  2  0  1  0 	/* RX_CLK (CLK16) */
+					3 23  2  0  1  0 	/* TX_CLK (CLK3) */
+					0 18  1  0  1  0 	/* TxD0 */
+					0 19  1  0  1  0 	/* TxD1 */
+					0 20  1  0  1  0 	/* TxD2 */
+					0 21  1  0  1  0 	/* TxD3 */
+					0 22  2  0  1  0 	/* RxD0 */
+					0 23  2  0  1  0 	/* RxD1 */
+					0 24  2  0  1  0 	/* RxD2 */
+					0 25  2  0  1  0 	/* RxD3 */
+					0 26  2  0  1  0 	/* RX_ER */
+					0 27  1  0  1  0 	/* TX_ER */
+					0 28  2  0  1  0 	/* RX_DV */
+					0 29  2  0  1  0 	/* COL */
+					0 30  1  0  1  0 	/* TX_EN */
+					0 31  2  0  1  0>;      /* CRS */
+			};
+			ucc3pio:ucc_pin@03 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0 13  2  0  1  0 	/* RX_CLK (CLK9) */
+					3 24  2  0  1  0 	/* TX_CLK (CLK10) */
+					1  0  1  0  1  0 	/* TxD0 */
+					1  1  1  0  1  0 	/* TxD1 */
+					1  2  1  0  1  0 	/* TxD2 */
+					1  3  1  0  1  0 	/* TxD3 */
+					1  4  2  0  1  0 	/* RxD0 */
+					1  5  2  0  1  0 	/* RxD1 */
+					1  6  2  0  1  0 	/* RxD2 */
+					1  7  2  0  1  0 	/* RxD3 */
+					1  8  2  0  1  0 	/* RX_ER */
+					1  9  1  0  1  0 	/* TX_ER */
+					1 10  2  0  1  0 	/* RX_DV */
+					1 11  2  0  1  0 	/* COL */
+					1 12  1  0  1  0 	/* TX_EN */
+					1 13  2  0  1  0>;      /* CRS */
+			};
+		};
+	};
+
+	qe@e0100000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "qe";
+		compatible = "fsl,qe";
+		ranges = <0x0 0xe0100000 0x00100000>;
+		reg = <0xe0100000 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <198000000>;
+		fsl,qe-num-riscs = <1>;
+		fsl,qe-num-snums = <28>;
+
+		muram@10000 {
+ 			#address-cells = <1>;
+ 			#size-cells = <1>;
+			compatible = "fsl,qe-muram", "fsl,cpm-muram";
+			ranges = <0x0 0x00010000 0x00004000>;
+
+			data-only@0 {
+				compatible = "fsl,qe-muram-data",
+					     "fsl,cpm-muram-data";
+				reg = <0x0 0x4000>;
+			};
+		};
+
+		spi@4c0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x4c0 0x40>;
+			interrupts = <2>;
+			interrupt-parent = <&qeic>;
+			gpios = <&qe_pio_d 13 0>;
+			mode = "cpu-qe";
+
+			mmc-slot@0 {
+				compatible = "fsl,mpc8323rdb-mmc-slot",
+					     "mmc-spi-slot";
+				reg = <0>;
+				gpios = <&qe_pio_d 14 1
+					 &qe_pio_d 15 0>;
+				voltage-ranges = <3300 3300>;
+				spi-max-frequency = <50000000>;
+			};
+		};
+
+		spi@500 {
+			cell-index = <1>;
+			compatible = "fsl,spi";
+			reg = <0x500 0x40>;
+			interrupts = <1>;
+			interrupt-parent = <&qeic>;
+			mode = "cpu";
+		};
+
+		enet0: ucc@3000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <2>;
+			reg = <0x3000 0x200>;
+			interrupts = <33>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "clk16";
+			tx-clock-name = "clk3";
+			phy-handle = <&phy00>;
+			pio-handle = <&ucc2pio>;
+		};
+
+		enet1: ucc@2200 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <3>;
+			reg = <0x2200 0x200>;
+			interrupts = <34>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "clk9";
+			tx-clock-name = "clk10";
+			phy-handle = <&phy04>;
+			pio-handle = <&ucc3pio>;
+		};
+
+		mdio@3120 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3120 0x18>;
+			compatible = "fsl,ucc-mdio";
+
+			phy00:ethernet-phy@00 {
+				interrupt-parent = <&ipic>;
+				interrupts = <0>;
+				reg = <0x0>;
+			};
+			phy04:ethernet-phy@04 {
+				interrupt-parent = <&ipic>;
+				interrupts = <0>;
+				reg = <0x4>;
+			};
+		};
+
+		qeic:interrupt-controller@80 {
+			interrupt-controller;
+			compatible = "fsl,qe-ic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <0x80 0x80>;
+			big-endian;
+			interrupts = <32 0x8 33 0x8>; //high:32 low:33
+			interrupt-parent = <&ipic>;
+		};
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 0x10 AD16 (USB) */
+				 0x8000 0x0 0x0 0x1 &ipic 17 0x8
+
+				/* IDSEL 0x11 AD17 (Mini1)*/
+				 0x8800 0x0 0x0 0x1 &ipic 18 0x8
+				 0x8800 0x0 0x0 0x2 &ipic 19 0x8
+				 0x8800 0x0 0x0 0x3 &ipic 20 0x8
+				 0x8800 0x0 0x0 0x4 &ipic 48 0x8
+
+				/* IDSEL 0x12 AD18 (PCI/Mini2) */
+				 0x9000 0x0 0x0 0x1 &ipic 19 0x8
+				 0x9000 0x0 0x0 0x2 &ipic 20 0x8
+				 0x9000 0x0 0x0 0x3 &ipic 48 0x8
+				 0x9000 0x0 0x0 0x4 &ipic 17 0x8>;
+
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0x0 0x0>;
+		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+			  0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+			  0x01000000 0x0 0xd0000000 0xd0000000 0x0 0x04000000>;
+		clock-frequency = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+		sleep = <&pmc 0x00010000>;
+	};
+};
diff --git a/src/powerpc/mpc8349emitx.dts b/src/powerpc/mpc8349emitx.dts
new file mode 100644
index 000000000000..90aed3ac2f69
--- /dev/null
+++ b/src/powerpc/mpc8349emitx.dts
@@ -0,0 +1,425 @@
+/*
+ * MPC8349E-mITX Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "MPC8349EMITX";
+	compatible = "MPC8349EMITX", "MPC834xMITX", "MPC83xxMITX";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8349@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	soc8349@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;                    // from bootloader
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		gpio1: gpio-controller@c00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8349-gpio";
+			reg = <0xc00 0x100>;
+			interrupts = <74 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		gpio2: gpio-controller@d00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8349-gpio";
+			reg = <0xd00 0x100>;
+			interrupts = <75 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+
+			eeprom: at24@50 {
+				compatible = "st,24c256";
+				reg = <0x50>;
+			};
+
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+				interrupts = <18 0x8>;
+				interrupt-parent = <&ipic>;
+			};
+
+			pcf1: iexp@38 {
+				#gpio-cells = <2>;
+				compatible = "ti,pcf8574a";
+				reg = <0x38>;
+				gpio-controller;
+			};
+
+			pcf2: iexp@39 {
+				#gpio-cells = <2>;
+				compatible = "ti,pcf8574a";
+				reg = <0x39>;
+				gpio-controller;
+			};
+
+			spd: at24@51 {
+				compatible = "at24,spd";
+				reg = <0x51>;
+			};
+
+			mcu_pio: mcu@a {
+				#gpio-cells = <2>;
+				compatible = "fsl,mc9s08qg8-mpc8349emitx",
+					     "fsl,mcu-mpc8349emitx";
+				reg = <0x0a>;
+				gpio-controller;
+			};
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		usb@22000 {
+			compatible = "fsl-usb2-mph";
+			reg = <0x22000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <39 0x8>;
+			phy_type = "ulpi";
+			port0;
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			dr_mode = "peripheral";
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy1c>;
+			linux,network-index = <0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				/* Vitesse 8201 */
+				phy1c: ethernet-phy@1c {
+					interrupt-parent = <&ipic>;
+					interrupts = <18 0x8>;
+					reg = <0x1c>;
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			interrupt-parent = <&ipic>;
+			/* Vitesse 7385 isn't on the MDIO bus */
+			fixed-link = <1 1 1000 0 0>;
+			linux,network-index = <1>;
+			tbi-handle = <&tbi1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;		// from bootloader
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;		// from bootloader
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
+		ipic: pic@700 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			green {
+				label = "Green";
+				gpios = <&pcf1 0 1>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			yellow {
+				label = "Yellow";
+				gpios = <&pcf1 1 1>;
+				/* linux,default-trigger = "heartbeat"; */
+				default-state = "on";
+			};
+		};
+
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 0x10 - SATA */
+				0x8000 0x0 0x0 0x1 &ipic 22 0x8 /* SATA_INTA */
+				>;
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0x0 0x0>;
+		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+			  0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x01000000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+
+	pci1: pci@e0008600 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 0x0E - MiniPCI Slot */
+				0x7000 0x0 0x0 0x1 &ipic 21 0x8 /* PCI_INTA */
+
+				/* IDSEL 0x0F - PCI Slot */
+				0x7800 0x0 0x0 0x1 &ipic 20 0x8 /* PCI_INTA */
+				0x7800 0x0 0x0 0x2 &ipic 21 0x8 /* PCI_INTB */
+				>;
+		interrupt-parent = <&ipic>;
+		interrupts = <67 0x8>;
+		bus-range = <0x0 0x0>;
+		ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xe3000000 0x0 0x01000000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008600 0x100		/* internal registers */
+		       0xe0008380 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8349e-localbus",
+			     "fsl,pq2pro-localbus",
+			     "simple-bus";
+		reg = <0xe0005000 0xd8>;
+		ranges = <0x0 0x0 0xfe000000 0x1000000	/* flash */
+			  0x1 0x0 0xf8000000 0x20000	/* VSC 7385 */
+			  0x2 0x0 0xf9000000 0x200000	/* exp slot */
+			  0x3 0x0 0xf0000000 0x210>;	/* CF slot */
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0x0      0x0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		flash@0,800000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x800000 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		pata@3,0 {
+			compatible = "fsl,mpc8349emitx-pata", "ata-generic";
+			reg = <0x3 0x0 0x10 0x3 0x20c 0x4>;
+			reg-shift = <1>;
+			pio-mode = <6>;
+			interrupts = <23 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+	};
+};
diff --git a/src/powerpc/mpc8349emitxgp.dts b/src/powerpc/mpc8349emitxgp.dts
new file mode 100644
index 000000000000..f00066dcc8de
--- /dev/null
+++ b/src/powerpc/mpc8349emitxgp.dts
@@ -0,0 +1,250 @@
+/*
+ * MPC8349E-mITX-GP Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "MPC8349EMITXGP";
+	compatible = "MPC8349EMITXGP", "MPC834xMITX", "MPC83xxMITX";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8349@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	soc8349@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;                    // from bootloader
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+				interrupts = <18 0x8>;
+				interrupt-parent = <&ipic>;
+			};
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			dr_mode = "otg";
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy1c>;
+			linux,network-index = <0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				/* Vitesse 8201 */
+				phy1c: ethernet-phy@1c {
+					interrupt-parent = <&ipic>;
+					interrupts = <18 0x8>;
+					reg = <0x1c>;
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;		// from bootloader
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;		// from bootloader
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
+		ipic: pic@700 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+	};
+
+	pci0: pci@e0008600 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 0x0F - PCI Slot */
+				0x7800 0x0 0x0 0x1 &ipic 20 0x8 /* PCI_INTA */
+				0x7800 0x0 0x0 0x2 &ipic 21 0x8 /* PCI_INTB */
+				 >;
+		interrupt-parent = <&ipic>;
+		interrupts = <67 0x8>;
+		bus-range = <0x1 0x1>;
+		ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xe3000000 0x0 0x01000000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008600 0x100		/* internal registers */
+		       0xe0008380 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+};
diff --git a/src/powerpc/mpc834x_mds.dts b/src/powerpc/mpc834x_mds.dts
new file mode 100644
index 000000000000..4843c3ff7166
--- /dev/null
+++ b/src/powerpc/mpc834x_mds.dts
@@ -0,0 +1,407 @@
+/*
+ * MPC8349E MDS Device Tree Source
+ *
+ * Copyright 2005, 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "MPC8349EMDS";
+	compatible = "MPC8349EMDS", "MPC834xMDS", "MPC83xxMDS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8349@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;	// 256MB at 0
+	};
+
+	bcsr@e2400000 {
+		compatible = "fsl,mpc8349mds-bcsr";
+		reg = <0xe2400000 0x8000>;
+	};
+
+	soc8349@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		/* phy type (ULPI or SERIAL) are only types supported for MPH */
+		/* port = 0 or 1 */
+		usb@22000 {
+			compatible = "fsl-usb2-mph";
+			reg = <0x22000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <39 0x8>;
+			phy_type = "ulpi";
+			port0;
+		};
+		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			dr_mode = "otg";
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			linux,network-index = <0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@0 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&ipic>;
+					interrupts = <18 0x8>;
+					reg = <0x1>;
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			linux,network-index = <1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: pic@700 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+				/* IDSEL 0x11 */
+				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
+				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
+				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
+				 0x8800 0x0 0x0 0x4 &ipic 23 0x8
+
+				/* IDSEL 0x12 */
+				 0x9000 0x0 0x0 0x1 &ipic 22 0x8
+				 0x9000 0x0 0x0 0x2 &ipic 23 0x8
+				 0x9000 0x0 0x0 0x3 &ipic 20 0x8
+				 0x9000 0x0 0x0 0x4 &ipic 21 0x8
+
+				/* IDSEL 0x13 */
+				 0x9800 0x0 0x0 0x1 &ipic 23 0x8
+				 0x9800 0x0 0x0 0x2 &ipic 20 0x8
+				 0x9800 0x0 0x0 0x3 &ipic 21 0x8
+				 0x9800 0x0 0x0 0x4 &ipic 22 0x8
+
+				/* IDSEL 0x15 */
+				 0xa800 0x0 0x0 0x1 &ipic 20 0x8
+				 0xa800 0x0 0x0 0x2 &ipic 21 0x8
+				 0xa800 0x0 0x0 0x3 &ipic 22 0x8
+				 0xa800 0x0 0x0 0x4 &ipic 23 0x8
+
+				/* IDSEL 0x16 */
+				 0xb000 0x0 0x0 0x1 &ipic 23 0x8
+				 0xb000 0x0 0x0 0x2 &ipic 20 0x8
+				 0xb000 0x0 0x0 0x3 &ipic 21 0x8
+				 0xb000 0x0 0x0 0x4 &ipic 22 0x8
+
+				/* IDSEL 0x17 */
+				 0xb800 0x0 0x0 0x1 &ipic 22 0x8
+				 0xb800 0x0 0x0 0x2 &ipic 23 0x8
+				 0xb800 0x0 0x0 0x3 &ipic 20 0x8
+				 0xb800 0x0 0x0 0x4 &ipic 21 0x8
+
+				/* IDSEL 0x18 */
+				 0xc000 0x0 0x0 0x1 &ipic 21 0x8
+				 0xc000 0x0 0x0 0x2 &ipic 22 0x8
+				 0xc000 0x0 0x0 0x3 &ipic 23 0x8
+				 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+			  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+
+	pci1: pci@e0008600 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+				/* IDSEL 0x11 */
+				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
+				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
+				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
+				 0x8800 0x0 0x0 0x4 &ipic 23 0x8
+
+				/* IDSEL 0x12 */
+				 0x9000 0x0 0x0 0x1 &ipic 22 0x8
+				 0x9000 0x0 0x0 0x2 &ipic 23 0x8
+				 0x9000 0x0 0x0 0x3 &ipic 20 0x8
+				 0x9000 0x0 0x0 0x4 &ipic 21 0x8
+
+				/* IDSEL 0x13 */
+				 0x9800 0x0 0x0 0x1 &ipic 23 0x8
+				 0x9800 0x0 0x0 0x2 &ipic 20 0x8
+				 0x9800 0x0 0x0 0x3 &ipic 21 0x8
+				 0x9800 0x0 0x0 0x4 &ipic 22 0x8
+
+				/* IDSEL 0x15 */
+				 0xa800 0x0 0x0 0x1 &ipic 20 0x8
+				 0xa800 0x0 0x0 0x2 &ipic 21 0x8
+				 0xa800 0x0 0x0 0x3 &ipic 22 0x8
+				 0xa800 0x0 0x0 0x4 &ipic 23 0x8
+
+				/* IDSEL 0x16 */
+				 0xb000 0x0 0x0 0x1 &ipic 23 0x8
+				 0xb000 0x0 0x0 0x2 &ipic 20 0x8
+				 0xb000 0x0 0x0 0x3 &ipic 21 0x8
+				 0xb000 0x0 0x0 0x4 &ipic 22 0x8
+
+				/* IDSEL 0x17 */
+				 0xb800 0x0 0x0 0x1 &ipic 22 0x8
+				 0xb800 0x0 0x0 0x2 &ipic 23 0x8
+				 0xb800 0x0 0x0 0x3 &ipic 20 0x8
+				 0xb800 0x0 0x0 0x4 &ipic 21 0x8
+
+				/* IDSEL 0x18 */
+				 0xc000 0x0 0x0 0x1 &ipic 21 0x8
+				 0xc000 0x0 0x0 0x2 &ipic 22 0x8
+				 0xc000 0x0 0x0 0x3 &ipic 23 0x8
+				 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
+		interrupt-parent = <&ipic>;
+		interrupts = <67 0x8>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
+			  0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xe2100000 0x0 0x00100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008600 0x100		/* internal registers */
+		       0xe0008380 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+};
diff --git a/src/powerpc/mpc836x_mds.dts b/src/powerpc/mpc836x_mds.dts
new file mode 100644
index 000000000000..ecb6ccd3a6aa
--- /dev/null
+++ b/src/powerpc/mpc836x_mds.dts
@@ -0,0 +1,485 @@
+/*
+ * MPC8360E EMDS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/*
+/memreserve/	00000000 1000000;
+*/
+
+/dts-v1/;
+
+/ {
+	model = "MPC8360MDS";
+	compatible = "MPC8360EMDS", "MPC836xMDS", "MPC83xxMDS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8360@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <32768>;		// L1, 32K
+			i-cache-size = <32768>;		// L1, 32K
+			timebase-frequency = <66000000>;
+			bus-frequency = <264000000>;
+			clock-frequency = <528000000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
+			     "simple-bus";
+		reg = <0xe0005000 0xd8>;
+		ranges = <0 0 0xfe000000 0x02000000
+		          1 0 0xf8000000 0x00008000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x2000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		bcsr@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+ 			compatible = "fsl,mpc8360mds-bcsr";
+			reg = <1 0 0x8000>;
+			ranges = <0 1 0 0x8000>;
+
+			bcsr13: gpio-controller@d {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8360mds-bcsr-gpio";
+				reg = <0xd 1>;
+				gpio-controller;
+			};
+		};
+	};
+
+	soc8360@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <264000000>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <264000000>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <264000000>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+			sleep = <&pmc 0x03000000>;
+		};
+
+		ipic: pic@700 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+
+		par_io@1400 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x1400 0x100>;
+			ranges = <0 0x1400 0x100>;
+			device_type = "par_io";
+			num-ports = <7>;
+
+			qe_pio_b: gpio-controller@18 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8360-qe-pario-bank",
+					     "fsl,mpc8323-qe-pario-bank";
+				reg = <0x18 0x18>;
+				gpio-controller;
+			};
+
+			pio1: ucc_pin@01 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0  3  1  0  1  0 	/* TxD0 */
+					0  4  1  0  1  0 	/* TxD1 */
+					0  5  1  0  1  0 	/* TxD2 */
+					0  6  1  0  1  0 	/* TxD3 */
+					1  6  1  0  3  0 	/* TxD4 */
+					1  7  1  0  1  0 	/* TxD5 */
+					1  9  1  0  2  0 	/* TxD6 */
+					1  10 1  0  2  0 	/* TxD7 */
+					0  9  2  0  1  0 	/* RxD0 */
+					0  10 2  0  1  0 	/* RxD1 */
+					0  11 2  0  1  0 	/* RxD2 */
+					0  12 2  0  1  0 	/* RxD3 */
+					0  13 2  0  1  0 	/* RxD4 */
+					1  1  2  0  2  0 	/* RxD5 */
+					1  0  2  0  2  0 	/* RxD6 */
+					1  4  2  0  2  0 	/* RxD7 */
+					0  7  1  0  1  0 	/* TX_EN */
+					0  8  1  0  1  0 	/* TX_ER */
+					0  15 2  0  1  0 	/* RX_DV */
+					0  16 2  0  1  0 	/* RX_ER */
+					0  0  2  0  1  0 	/* RX_CLK */
+					2  9  1  0  3  0 	/* GTX_CLK - CLK10 */
+					2  8  2  0  1  0>;	/* GTX125 - CLK9 */
+			};
+			pio2: ucc_pin@02 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0  17 1  0  1  0   /* TxD0 */
+					0  18 1  0  1  0   /* TxD1 */
+					0  19 1  0  1  0   /* TxD2 */
+					0  20 1  0  1  0   /* TxD3 */
+					1  2  1  0  1  0   /* TxD4 */
+					1  3  1  0  2  0   /* TxD5 */
+					1  5  1  0  3  0   /* TxD6 */
+					1  8  1  0  3  0   /* TxD7 */
+					0  23 2  0  1  0   /* RxD0 */
+					0  24 2  0  1  0   /* RxD1 */
+					0  25 2  0  1  0   /* RxD2 */
+					0  26 2  0  1  0   /* RxD3 */
+					0  27 2  0  1  0   /* RxD4 */
+					1  12 2  0  2  0   /* RxD5 */
+					1  13 2  0  3  0   /* RxD6 */
+					1  11 2  0  2  0   /* RxD7 */
+					0  21 1  0  1  0   /* TX_EN */
+					0  22 1  0  1  0   /* TX_ER */
+					0  29 2  0  1  0   /* RX_DV */
+					0  30 2  0  1  0   /* RX_ER */
+					0  31 2  0  1  0   /* RX_CLK */
+					2  2  1  0  2  0   /* GTX_CLK - CLK10 */
+					2  3  2  0  1  0   /* GTX125 - CLK4 */
+					0  1  3  0  2  0   /* MDIO */
+					0  2  1  0  1  0>; /* MDC */
+			};
+
+		};
+	};
+
+	qe@e0100000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "qe";
+		compatible = "fsl,qe";
+		ranges = <0x0 0xe0100000 0x00100000>;
+		reg = <0xe0100000 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <396000000>;
+		fsl,qe-num-riscs = <2>;
+		fsl,qe-num-snums = <28>;
+
+		muram@10000 {
+ 			#address-cells = <1>;
+ 			#size-cells = <1>;
+			compatible = "fsl,qe-muram", "fsl,cpm-muram";
+			ranges = <0x0 0x00010000 0x0000c000>;
+
+			data-only@0 {
+				compatible = "fsl,qe-muram-data",
+					     "fsl,cpm-muram-data";
+				reg = <0x0 0xc000>;
+			};
+		};
+
+		timer@440 {
+			compatible = "fsl,mpc8360-qe-gtm",
+				     "fsl,qe-gtm", "fsl,gtm";
+			reg = <0x440 0x40>;
+			clock-frequency = <132000000>;
+			interrupts = <12 13 14 15>;
+			interrupt-parent = <&qeic>;
+		};
+
+		spi@4c0 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x4c0 0x40>;
+			interrupts = <2>;
+			interrupt-parent = <&qeic>;
+			mode = "cpu";
+		};
+
+		spi@500 {
+			cell-index = <1>;
+			compatible = "fsl,spi";
+			reg = <0x500 0x40>;
+			interrupts = <1>;
+			interrupt-parent = <&qeic>;
+			mode = "cpu";
+		};
+
+		usb@6c0 {
+			compatible = "fsl,mpc8360-qe-usb",
+				     "fsl,mpc8323-qe-usb";
+			reg = <0x6c0 0x40 0x8b00 0x100>;
+			interrupts = <11>;
+			interrupt-parent = <&qeic>;
+			fsl,fullspeed-clock = "clk21";
+			fsl,lowspeed-clock = "brg9";
+			gpios = <&qe_pio_b  2 0   /* USBOE */
+				 &qe_pio_b  3 0   /* USBTP */
+				 &qe_pio_b  8 0   /* USBTN */
+				 &qe_pio_b  9 0   /* USBRP */
+				 &qe_pio_b 11 0   /* USBRN */
+				 &bcsr13    5 0   /* SPEED */
+				 &bcsr13    4 1>; /* POWER */
+		};
+
+		enet0: ucc@2000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <1>;
+			reg = <0x2000 0x200>;
+			interrupts = <32>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk9";
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+			pio-handle = <&pio1>;
+		};
+
+		enet1: ucc@3000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <2>;
+			reg = <0x3000 0x200>;
+			interrupts = <33>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk4";
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+			pio-handle = <&pio2>;
+		};
+
+		mdio@2120 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2120 0x18>;
+			compatible = "fsl,ucc-mdio";
+
+			phy0: ethernet-phy@00 {
+				interrupt-parent = <&ipic>;
+				interrupts = <17 0x8>;
+				reg = <0x0>;
+			};
+			phy1: ethernet-phy@01 {
+				interrupt-parent = <&ipic>;
+				interrupts = <18 0x8>;
+				reg = <0x1>;
+			};
+			tbi-phy@2 {
+				device_type = "tbi-phy";
+				reg = <0x2>;
+			};
+		};
+
+		qeic: interrupt-controller@80 {
+			interrupt-controller;
+			compatible = "fsl,qe-ic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <0x80 0x80>;
+			big-endian;
+			interrupts = <32 0x8 33 0x8>; // high:32 low:33
+			interrupt-parent = <&ipic>;
+		};
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+				/* IDSEL 0x11 AD17 */
+				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
+				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
+				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
+				 0x8800 0x0 0x0 0x4 &ipic 23 0x8
+
+				/* IDSEL 0x12 AD18 */
+				 0x9000 0x0 0x0 0x1 &ipic 22 0x8
+				 0x9000 0x0 0x0 0x2 &ipic 23 0x8
+				 0x9000 0x0 0x0 0x3 &ipic 20 0x8
+				 0x9000 0x0 0x0 0x4 &ipic 21 0x8
+
+				/* IDSEL 0x13 AD19 */
+				 0x9800 0x0 0x0 0x1 &ipic 23 0x8
+				 0x9800 0x0 0x0 0x2 &ipic 20 0x8
+				 0x9800 0x0 0x0 0x3 &ipic 21 0x8
+				 0x9800 0x0 0x0 0x4 &ipic 22 0x8
+
+				/* IDSEL 0x15 AD21*/
+				 0xa800 0x0 0x0 0x1 &ipic 20 0x8
+				 0xa800 0x0 0x0 0x2 &ipic 21 0x8
+				 0xa800 0x0 0x0 0x3 &ipic 22 0x8
+				 0xa800 0x0 0x0 0x4 &ipic 23 0x8
+
+				/* IDSEL 0x16 AD22*/
+				 0xb000 0x0 0x0 0x1 &ipic 23 0x8
+				 0xb000 0x0 0x0 0x2 &ipic 20 0x8
+				 0xb000 0x0 0x0 0x3 &ipic 21 0x8
+				 0xb000 0x0 0x0 0x4 &ipic 22 0x8
+
+				/* IDSEL 0x17 AD23*/
+				 0xb800 0x0 0x0 0x1 &ipic 22 0x8
+				 0xb800 0x0 0x0 0x2 &ipic 23 0x8
+				 0xb800 0x0 0x0 0x3 &ipic 20 0x8
+				 0xb800 0x0 0x0 0x4 &ipic 21 0x8
+
+				/* IDSEL 0x18 AD24*/
+				 0xc000 0x0 0x0 0x1 &ipic 21 0x8
+				 0xc000 0x0 0x0 0x2 &ipic 22 0x8
+				 0xc000 0x0 0x0 0x3 &ipic 23 0x8
+				 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+		sleep = <&pmc 0x00010000>;
+	};
+};
diff --git a/src/powerpc/mpc836x_rdk.dts b/src/powerpc/mpc836x_rdk.dts
new file mode 100644
index 000000000000..47c5fc64e433
--- /dev/null
+++ b/src/powerpc/mpc836x_rdk.dts
@@ -0,0 +1,467 @@
+/*
+ * MPC8360E RDK Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2007-2008 MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8360rdk";
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8360@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			/* filled by u-boot */
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		/* filled by u-boot */
+		reg = <0 0>;
+	};
+
+	soc@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8360-immr", "fsl,immr", "fsl,soc",
+			     "simple-bus";
+		ranges = <0 0xe0000000 0x200000>;
+		reg = <0xe0000000 0x200>;
+		/* filled by u-boot */
+		bus-frequency = <0>;
+
+		wdt@200 {
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <16 8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			interrupts = <9 8>;
+			interrupt-parent = <&ipic>;
+			/* filled by u-boot */
+			clock-frequency = <0>;
+		};
+
+		serial1: serial@4600 {
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			interrupts = <10 8>;
+			interrupt-parent = <&ipic>;
+			/* filled by u-boot */
+			clock-frequency = <0>;
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+			sleep = <&pmc 0x03000000>;
+		};
+
+		ipic: interrupt-controller@700 {
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			compatible = "fsl,pq2pro-pic", "fsl,ipic";
+			interrupt-controller;
+			reg = <0x700 0x100>;
+		};
+
+		qe_pio_b: gpio-controller@1418 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8360-qe-pario-bank",
+				     "fsl,mpc8323-qe-pario-bank";
+			reg = <0x1418 0x18>;
+			gpio-controller;
+		};
+
+		qe_pio_e: gpio-controller@1460 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8360-qe-pario-bank",
+				     "fsl,mpc8323-qe-pario-bank";
+			reg = <0x1460 0x18>;
+			gpio-controller;
+		};
+
+		qe@100000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "qe";
+			compatible = "fsl,qe", "simple-bus";
+			ranges = <0 0x100000 0x100000>;
+			reg = <0x100000 0x480>;
+			/* filled by u-boot */
+			clock-frequency = <0>;
+			bus-frequency = <0>;
+			brg-frequency = <0>;
+			fsl,qe-num-riscs = <2>;
+			fsl,qe-num-snums = <28>;
+
+			muram@10000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,qe-muram", "fsl,cpm-muram";
+				ranges = <0 0x10000 0xc000>;
+
+				data-only@0 {
+					compatible = "fsl,qe-muram-data",
+						     "fsl,cpm-muram-data";
+					reg = <0 0xc000>;
+				};
+			};
+
+			timer@440 {
+				compatible = "fsl,mpc8360-qe-gtm",
+					     "fsl,qe-gtm", "fsl,gtm";
+				reg = <0x440 0x40>;
+				interrupts = <12 13 14 15>;
+				interrupt-parent = <&qeic>;
+				clock-frequency = <166666666>;
+			};
+
+			usb@6c0 {
+				compatible = "fsl,mpc8360-qe-usb",
+					     "fsl,mpc8323-qe-usb";
+				reg = <0x6c0 0x40 0x8b00 0x100>;
+				interrupts = <11>;
+				interrupt-parent = <&qeic>;
+				fsl,fullspeed-clock = "clk21";
+				gpios = <&qe_pio_b  2 0 /* USBOE */
+					 &qe_pio_b  3 0 /* USBTP */
+					 &qe_pio_b  8 0 /* USBTN */
+					 &qe_pio_b  9 0 /* USBRP */
+					 &qe_pio_b 11 0 /* USBRN */
+					 &qe_pio_e 20 0 /* SPEED */
+					 &qe_pio_e 21 1 /* POWER */>;
+			};
+
+			spi@4c0 {
+				cell-index = <0>;
+				compatible = "fsl,spi";
+				reg = <0x4c0 0x40>;
+				interrupts = <2>;
+				interrupt-parent = <&qeic>;
+				mode = "cpu-qe";
+			};
+
+			spi@500 {
+				cell-index = <1>;
+				compatible = "fsl,spi";
+				reg = <0x500 0x40>;
+				interrupts = <1>;
+				interrupt-parent = <&qeic>;
+				mode = "cpu-qe";
+			};
+
+			enet0: ucc@2000 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <1>;
+				reg = <0x2000 0x200>;
+				interrupts = <32>;
+				interrupt-parent = <&qeic>;
+				rx-clock-name = "none";
+				tx-clock-name = "clk9";
+				phy-handle = <&phy2>;
+				phy-connection-type = "rgmii-rxid";
+				/* filled by u-boot */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			enet1: ucc@3000 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <2>;
+				reg = <0x3000 0x200>;
+				interrupts = <33>;
+				interrupt-parent = <&qeic>;
+				rx-clock-name = "none";
+				tx-clock-name = "clk4";
+				phy-handle = <&phy4>;
+				phy-connection-type = "rgmii-rxid";
+				/* filled by u-boot */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			enet2: ucc@2600 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <7>;
+				reg = <0x2600 0x200>;
+				interrupts = <42>;
+				interrupt-parent = <&qeic>;
+				rx-clock-name = "clk20";
+				tx-clock-name = "clk19";
+				phy-handle = <&phy1>;
+				phy-connection-type = "mii";
+				/* filled by u-boot */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			enet3: ucc@3200 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <4>;
+				reg = <0x3200 0x200>;
+				interrupts = <35>;
+				interrupt-parent = <&qeic>;
+				rx-clock-name = "clk8";
+				tx-clock-name = "clk7";
+				phy-handle = <&phy3>;
+				phy-connection-type = "mii";
+				/* filled by u-boot */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			mdio@2120 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,ucc-mdio";
+				reg = <0x2120 0x18>;
+
+				phy1: ethernet-phy@1 {
+					compatible = "national,DP83848VV";
+					reg = <1>;
+				};
+
+				phy2: ethernet-phy@2 {
+					compatible = "broadcom,BCM5481UA2KMLG";
+					reg = <2>;
+				};
+
+				phy3: ethernet-phy@3 {
+					compatible = "national,DP83848VV";
+					reg = <3>;
+				};
+
+				phy4: ethernet-phy@4 {
+					compatible = "broadcom,BCM5481UA2KMLG";
+					reg = <4>;
+				};
+			};
+
+			serial2: ucc@2400 {
+				device_type = "serial";
+				compatible = "ucc_uart";
+				reg = <0x2400 0x200>;
+				cell-index = <5>;
+				port-number = <0>;
+				rx-clock-name = "brg7";
+				tx-clock-name = "brg8";
+				interrupts = <40>;
+				interrupt-parent = <&qeic>;
+				soft-uart;
+			};
+
+			serial3: ucc@3400 {
+				device_type = "serial";
+				compatible = "ucc_uart";
+				reg = <0x3400 0x200>;
+				cell-index = <6>;
+				port-number = <1>;
+				rx-clock-name = "brg13";
+				tx-clock-name = "brg14";
+				interrupts = <41>;
+				interrupt-parent = <&qeic>;
+				soft-uart;
+			};
+
+			qeic: interrupt-controller@80 {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				compatible = "fsl,qe-ic";
+				interrupt-controller;
+				reg = <0x80 0x80>;
+				big-endian;
+				interrupts = <32 8 33 8>;
+				interrupt-parent = <&ipic>;
+			};
+		};
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
+			     "simple-bus";
+		reg = <0xe0005000 0xd8>;
+		ranges = <0 0 0xff800000 0x0800000
+			  1 0 0x60000000 0x0001000
+			  2 0 0x70000000 0x4000000>;
+
+		flash@0,0 {
+			compatible = "intel,PC28F640P30T85", "cfi-flash";
+			reg = <0 0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		upm@1,0 {
+			compatible = "fsl,upm-nand";
+			reg = <1 0 1>;
+			fsl,upm-addr-offset = <16>;
+			fsl,upm-cmd-offset = <8>;
+			gpios = <&qe_pio_e 18 0>;
+
+			flash {
+				compatible = "st,nand512-a";
+			};
+		};
+
+		display@2,0 {
+			device_type = "display";
+			compatible = "fujitsu,MB86277", "fujitsu,mint";
+			reg = <2 0 0x4000000>;
+			fujitsu,sh3;
+			little-endian;
+			/* filled by u-boot */
+			address = <0>;
+			depth = <0>;
+			width = <0>;
+			height = <0>;
+			linebytes = <0>;
+			/* linux,opened; - added by uboot */
+		};
+	};
+
+	pci0: pci@e0008500 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8360-pci", "fsl,mpc8349-pci";
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x42000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x01000000 0 0xe0300000 0xe0300000 0 0x00100000>;
+		interrupts = <66 8>;
+		interrupt-parent = <&ipic>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = </* miniPCI0 IDSEL 0x14 AD20 */
+				 0xa000 0 0 1 &ipic 18 8
+				 0xa000 0 0 2 &ipic 19 8
+
+				 /* PCI1 IDSEL 0x15 AD21 */
+				 0xa800 0 0 1 &ipic 19 8
+				 0xa800 0 0 2 &ipic 20 8
+				 0xa800 0 0 3 &ipic 21 8
+				 0xa800 0 0 4 &ipic 18 8>;
+		sleep = <&pmc 0x00010000>;
+		/* filled by u-boot */
+		bus-range = <0 0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/src/powerpc/mpc8377_mds.dts b/src/powerpc/mpc8377_mds.dts
new file mode 100644
index 000000000000..c2c062e8175d
--- /dev/null
+++ b/src/powerpc/mpc8377_mds.dts
@@ -0,0 +1,509 @@
+/*
+ * MPC8377E MDS Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "fsl,mpc8377emds";
+	compatible = "fsl,mpc8377emds","fsl,mpc837xmds";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8377@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;	// 512MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		// booting from NOR flash
+		ranges = <0 0x0 0xfe000000 0x02000000
+		          1 0x0 0xf8000000 0x00008000
+		          3 0x0 0xe0600000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0 0x0 0x2000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			fs@100000 {
+				reg = <0x100000 0x800000>;
+			};
+
+			kernel@1d00000 {
+				reg = <0x1d00000 0x200000>;
+			};
+
+			dtb@1f00000 {
+				reg = <0x1f00000 0x100000>;
+			};
+		};
+
+		bcsr@1,0 {
+			reg = <1 0x0 0x8000>;
+			compatible = "fsl,mpc837xmds-bcsr";
+		};
+
+		nand@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8377-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <3 0x0 0x8000>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			kernel@100000 {
+				reg = <0x100000 0x300000>;
+			};
+
+			fs@400000 {
+				reg = <0x400000 0x1c00000>;
+			};
+		};
+	};
+
+	soc@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		sleep-nexus {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x0c000000>;
+			ranges;
+
+			i2c@3000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				compatible = "fsl-i2c";
+				reg = <0x3000 0x100>;
+				interrupts = <14 0x8>;
+				interrupt-parent = <&ipic>;
+				dfsrr;
+
+				rtc@68 {
+					compatible = "dallas,ds1374";
+					reg = <0x68>;
+					interrupts = <19 0x8>;
+					interrupt-parent = <&ipic>;
+				};
+			};
+
+			sdhci@2e000 {
+				compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
+				reg = <0x2e000 0x1000>;
+				interrupts = <42 0x8>;
+				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
+				/* Filled in by U-Boot */
+				clock-frequency = <0>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			dr_mode = "host";
+			phy_type = "ulpi";
+			sleep = <&pmc 0x00c00000>;
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+			sleep = <&pmc 0xc0000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x2>;
+				};
+
+				phy3: ethernet-phy@3 {
+					interrupt-parent = <&ipic>;
+					interrupts = <18 0x8>;
+					reg = <0x3>;
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy3>;
+			sleep = <&pmc 0x30000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <0x47 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <0x47 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <0x47 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <0x47 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <0x47 8>;
+			};
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+			sleep = <&pmc 0x03000000>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			interrupts = <44 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x000000c0>;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			interrupts = <45 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x00000030>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: pic@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+				/* IDSEL 0x11 */
+				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
+				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
+				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
+				 0x8800 0x0 0x0 0x4 &ipic 23 0x8
+
+				/* IDSEL 0x12 */
+				 0x9000 0x0 0x0 0x1 &ipic 22 0x8
+				 0x9000 0x0 0x0 0x2 &ipic 23 0x8
+				 0x9000 0x0 0x0 0x3 &ipic 20 0x8
+				 0x9000 0x0 0x0 0x4 &ipic 21 0x8
+
+				/* IDSEL 0x13 */
+				 0x9800 0x0 0x0 0x1 &ipic 23 0x8
+				 0x9800 0x0 0x0 0x2 &ipic 20 0x8
+				 0x9800 0x0 0x0 0x3 &ipic 21 0x8
+				 0x9800 0x0 0x0 0x4 &ipic 22 0x8
+
+				/* IDSEL 0x15 */
+				 0xa800 0x0 0x0 0x1 &ipic 20 0x8
+				 0xa800 0x0 0x0 0x2 &ipic 21 0x8
+				 0xa800 0x0 0x0 0x3 &ipic 22 0x8
+				 0xa800 0x0 0x0 0x4 &ipic 23 0x8
+
+				/* IDSEL 0x16 */
+				 0xb000 0x0 0x0 0x1 &ipic 23 0x8
+				 0xb000 0x0 0x0 0x2 &ipic 20 0x8
+				 0xb000 0x0 0x0 0x3 &ipic 21 0x8
+				 0xb000 0x0 0x0 0x4 &ipic 22 0x8
+
+				/* IDSEL 0x17 */
+				 0xb800 0x0 0x0 0x1 &ipic 22 0x8
+				 0xb800 0x0 0x0 0x2 &ipic 23 0x8
+				 0xb800 0x0 0x0 0x3 &ipic 20 0x8
+				 0xb800 0x0 0x0 0x4 &ipic 21 0x8
+
+				/* IDSEL 0x18 */
+				 0xc000 0x0 0x0 0x1 &ipic 21 0x8
+				 0xc000 0x0 0x0 0x2 &ipic 22 0x8
+				 0xc000 0x0 0x0 0x3 &ipic 23 0x8
+				 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0x0 0x0>;
+		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
+		sleep = <&pmc 0x00010000>;
+		clock-frequency = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+
+	pci1: pcie@e0009000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe0009000 0x00001000>;
+		ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
+		          0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 1 8
+				 0 0 0 2 &ipic 1 8
+				 0 0 0 3 &ipic 1 8
+				 0 0 0 4 &ipic 1 8>;
+		sleep = <&pmc 0x00300000>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xa8000000
+				  0x02000000 0 0xa8000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+
+	pci2: pcie@e000a000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe000a000 0x00001000>;
+		ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 2 8
+				 0 0 0 2 &ipic 2 8
+				 0 0 0 3 &ipic 2 8
+				 0 0 0 4 &ipic 2 8>;
+		sleep = <&pmc 0x000c0000>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xc8000000
+				  0x02000000 0 0xc8000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+};
diff --git a/src/powerpc/mpc8377_rdb.dts b/src/powerpc/mpc8377_rdb.dts
new file mode 100644
index 000000000000..e32613963ab0
--- /dev/null
+++ b/src/powerpc/mpc8377_rdb.dts
@@ -0,0 +1,502 @@
+/*
+ * MPC8377E RDB Device Tree Source
+ *
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "fsl,mpc8377rdb";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8377@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;	// 256MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		// CS0 and CS1 are swapped when
+		// booting from nand, but the
+		// addresses are the same.
+		ranges = <0x0 0x0 0xfe000000 0x00800000
+		          0x1 0x0 0xe0600000 0x00008000
+		          0x2 0x0 0xf0000000 0x00020000
+		          0x3 0x0 0xfa000000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8377-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x8000>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			kernel@100000 {
+				reg = <0x100000 0x300000>;
+			};
+			fs@400000 {
+				reg = <0x400000 0x1c00000>;
+			};
+		};
+	};
+
+	immr@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		gpio1: gpio-controller@c00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
+			reg = <0xc00 0x100>;
+			interrupts = <74 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		gpio2: gpio-controller@d00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
+			reg = <0xd00 0x100>;
+			interrupts = <75 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		sleep-nexus {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x0c000000>;
+			ranges;
+
+			i2c@3000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				compatible = "fsl-i2c";
+				reg = <0x3000 0x100>;
+				interrupts = <14 0x8>;
+				interrupt-parent = <&ipic>;
+				dfsrr;
+
+				dtt@48 {
+					compatible = "national,lm75";
+					reg = <0x48>;
+				};
+
+				at24@50 {
+					compatible = "at24,24c256";
+					reg = <0x50>;
+				};
+
+				rtc@68 {
+					compatible = "dallas,ds1339";
+					reg = <0x68>;
+				};
+
+				mcu_pio: mcu@a {
+					#gpio-cells = <2>;
+					compatible = "fsl,mc9s08qg8-mpc8377erdb",
+						     "fsl,mcu-mpc8349emitx";
+					reg = <0x0a>;
+					gpio-controller;
+				};
+			};
+
+			sdhci@2e000 {
+				compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
+				reg = <0x2e000 0x1000>;
+				interrupts = <42 0x8>;
+				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
+				/* Filled in by U-Boot */
+				clock-frequency = <111111111>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			phy_type = "ulpi";
+			sleep = <&pmc 0x00c00000>;
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+			sleep = <&pmc 0xc0000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x2>;
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			fixed-link = <1 1 1000 0 0>;
+			tbi-handle = <&tbi1>;
+			sleep = <&pmc 0x30000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+			sleep = <&pmc 0x03000000>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			interrupts = <44 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x000000c0>;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			interrupts = <45 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x00000030>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
+
+				/* IDSEL AD14 IRQ6 inta */
+				 0x7000 0x0 0x0 0x1 &ipic 22 0x8
+
+				/* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
+				 0x7800 0x0 0x0 0x1 &ipic 21 0x8
+				 0x7800 0x0 0x0 0x2 &ipic 22 0x8
+				 0x7800 0x0 0x0 0x4 &ipic 23 0x8
+
+				/* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
+				 0xE000 0x0 0x0 0x1 &ipic 23 0x8
+				 0xE000 0x0 0x0 0x2 &ipic 21 0x8
+				 0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
+		sleep = <&pmc 0x00010000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+
+	pci1: pcie@e0009000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe0009000 0x00001000>;
+		ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
+		          0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 1 8
+				 0 0 0 2 &ipic 1 8
+				 0 0 0 3 &ipic 1 8
+				 0 0 0 4 &ipic 1 8>;
+		sleep = <&pmc 0x00300000>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xa8000000
+				  0x02000000 0 0xa8000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+
+	pci2: pcie@e000a000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe000a000 0x00001000>;
+		ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 2 8
+				 0 0 0 2 &ipic 2 8
+				 0 0 0 3 &ipic 2 8
+				 0 0 0 4 &ipic 2 8>;
+		sleep = <&pmc 0x000c0000>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xc8000000
+				  0x02000000 0 0xc8000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			gpios = <&mcu_pio 0 0>;
+			default-state = "on";
+		};
+
+		hdd {
+			gpios = <&mcu_pio 1 0>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+};
diff --git a/src/powerpc/mpc8377_wlan.dts b/src/powerpc/mpc8377_wlan.dts
new file mode 100644
index 000000000000..c0c790168b96
--- /dev/null
+++ b/src/powerpc/mpc8377_wlan.dts
@@ -0,0 +1,463 @@
+/*
+ * MPC8377E WLAN Device Tree Source
+ *
+ * Copyright 2007-2009 Freescale Semiconductor Inc.
+ * Copyright 2009 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "fsl,mpc8377wlan";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8377@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;	// 512MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+		ranges = <0x0 0x0 0xfc000000 0x04000000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x4000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				reg = <0 0x80000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			partition@a0000 {
+				reg = <0xa0000 0x300000>;
+				label = "kernel";
+			};
+
+			partition@3a0000 {
+				reg = <0x3a0000 0x3c60000>;
+				label = "rootfs";
+			};
+		};
+	};
+
+	immr@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		gpio1: gpio-controller@c00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
+			reg = <0xc00 0x100>;
+			interrupts = <74 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		gpio2: gpio-controller@d00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
+			reg = <0xd00 0x100>;
+			interrupts = <75 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		sleep-nexus {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x0c000000>;
+			ranges;
+
+			i2c@3000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				compatible = "fsl-i2c";
+				reg = <0x3000 0x100>;
+				interrupts = <14 0x8>;
+				interrupt-parent = <&ipic>;
+				dfsrr;
+
+				at24@50 {
+					compatible = "at24,24c256";
+					reg = <0x50>;
+				};
+
+				rtc@68 {
+					compatible = "dallas,ds1339";
+					reg = <0x68>;
+				};
+			};
+
+			sdhci@2e000 {
+				compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
+				reg = <0x2e000 0x1000>;
+				interrupts = <42 0x8>;
+				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
+				clock-frequency = <133333333>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			phy_type = "ulpi";
+			sleep = <&pmc 0x00c00000>;
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+			sleep = <&pmc 0xc0000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x2>;
+				};
+
+				phy3: ethernet-phy@3 {
+					interrupt-parent = <&ipic>;
+					interrupts = <18 0x8>;
+					reg = <0x3>;
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			phy-handle = <&phy3>;
+			tbi-handle = <&tbi1>;
+			sleep = <&pmc 0x30000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+			sleep = <&pmc 0x03000000>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			interrupts = <44 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x000000c0>;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			interrupts = <45 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x00000030>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
+
+				/* IDSEL AD14 IRQ6 inta */
+				 0x7000 0x0 0x0 0x1 &ipic 22 0x8
+
+				/* IDSEL AD15 IRQ5 inta */
+				 0x7800 0x0 0x0 0x1 &ipic 21 0x8>;
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
+		sleep = <&pmc 0x00010000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+
+	pci1: pcie@e0009000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe0009000 0x00001000>;
+		ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
+		          0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 1 8
+				 0 0 0 2 &ipic 1 8
+				 0 0 0 3 &ipic 1 8
+				 0 0 0 4 &ipic 1 8>;
+		sleep = <&pmc 0x00300000>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xa8000000
+				  0x02000000 0 0xa8000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+
+	pci2: pcie@e000a000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe000a000 0x00001000>;
+		ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 2 8
+				 0 0 0 2 &ipic 2 8
+				 0 0 0 3 &ipic 2 8
+				 0 0 0 4 &ipic 2 8>;
+		sleep = <&pmc 0x000c0000>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xc8000000
+				  0x02000000 0 0xc8000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+};
diff --git a/src/powerpc/mpc8378_mds.dts b/src/powerpc/mpc8378_mds.dts
new file mode 100644
index 000000000000..1b82b77f9415
--- /dev/null
+++ b/src/powerpc/mpc8378_mds.dts
@@ -0,0 +1,493 @@
+/*
+ * MPC8378E MDS Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "fsl,mpc8378emds";
+	compatible = "fsl,mpc8378emds","fsl,mpc837xmds";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8378@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;	// 512MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		// booting from NOR flash
+		ranges = <0 0x0 0xfe000000 0x02000000
+		          1 0x0 0xf8000000 0x00008000
+		          3 0x0 0xe0600000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0 0x0 0x2000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			fs@100000 {
+				reg = <0x100000 0x800000>;
+			};
+
+			kernel@1d00000 {
+				reg = <0x1d00000 0x200000>;
+			};
+
+			dtb@1f00000 {
+				reg = <0x1f00000 0x100000>;
+			};
+		};
+
+		bcsr@1,0 {
+			reg = <1 0x0 0x8000>;
+			compatible = "fsl,mpc837xmds-bcsr";
+		};
+
+		nand@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8378-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <3 0x0 0x8000>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			kernel@100000 {
+				reg = <0x100000 0x300000>;
+			};
+
+			fs@400000 {
+				reg = <0x400000 0x1c00000>;
+			};
+		};
+	};
+
+	soc@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		sleep-nexus {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x0c000000>;
+			ranges;
+
+			i2c@3000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				compatible = "fsl-i2c";
+				reg = <0x3000 0x100>;
+				interrupts = <14 0x8>;
+				interrupt-parent = <&ipic>;
+				dfsrr;
+
+				rtc@68 {
+					compatible = "dallas,ds1374";
+					reg = <0x68>;
+					interrupts = <19 0x8>;
+					interrupt-parent = <&ipic>;
+				};
+			};
+
+			sdhci@2e000 {
+				compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
+				reg = <0x2e000 0x1000>;
+				interrupts = <42 0x8>;
+				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
+				/* Filled in by U-Boot */
+				clock-frequency = <0>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			dr_mode = "host";
+			phy_type = "ulpi";
+			sleep = <&pmc 0x00c00000>;
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+			sleep = <&pmc 0xc0000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x2>;
+				};
+
+				phy3: ethernet-phy@3 {
+					interrupt-parent = <&ipic>;
+					interrupts = <18 0x8>;
+					reg = <0x3>;
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy3>;
+			sleep = <&pmc 0x30000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+			sleep = <&pmc 0x03000000>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: pic@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+				/* IDSEL 0x11 */
+				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
+				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
+				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
+				 0x8800 0x0 0x0 0x4 &ipic 23 0x8
+
+				/* IDSEL 0x12 */
+				 0x9000 0x0 0x0 0x1 &ipic 22 0x8
+				 0x9000 0x0 0x0 0x2 &ipic 23 0x8
+				 0x9000 0x0 0x0 0x3 &ipic 20 0x8
+				 0x9000 0x0 0x0 0x4 &ipic 21 0x8
+
+				/* IDSEL 0x13 */
+				 0x9800 0x0 0x0 0x1 &ipic 23 0x8
+				 0x9800 0x0 0x0 0x2 &ipic 20 0x8
+				 0x9800 0x0 0x0 0x3 &ipic 21 0x8
+				 0x9800 0x0 0x0 0x4 &ipic 22 0x8
+
+				/* IDSEL 0x15 */
+				 0xa800 0x0 0x0 0x1 &ipic 20 0x8
+				 0xa800 0x0 0x0 0x2 &ipic 21 0x8
+				 0xa800 0x0 0x0 0x3 &ipic 22 0x8
+				 0xa800 0x0 0x0 0x4 &ipic 23 0x8
+
+				/* IDSEL 0x16 */
+				 0xb000 0x0 0x0 0x1 &ipic 23 0x8
+				 0xb000 0x0 0x0 0x2 &ipic 20 0x8
+				 0xb000 0x0 0x0 0x3 &ipic 21 0x8
+				 0xb000 0x0 0x0 0x4 &ipic 22 0x8
+
+				/* IDSEL 0x17 */
+				 0xb800 0x0 0x0 0x1 &ipic 22 0x8
+				 0xb800 0x0 0x0 0x2 &ipic 23 0x8
+				 0xb800 0x0 0x0 0x3 &ipic 20 0x8
+				 0xb800 0x0 0x0 0x4 &ipic 21 0x8
+
+				/* IDSEL 0x18 */
+				 0xc000 0x0 0x0 0x1 &ipic 21 0x8
+				 0xc000 0x0 0x0 0x2 &ipic 22 0x8
+				 0xc000 0x0 0x0 0x3 &ipic 23 0x8
+				 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0x0 0x0>;
+		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
+		clock-frequency = <0>;
+		sleep = <&pmc 0x00010000>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+
+	pci1: pcie@e0009000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe0009000 0x00001000>;
+		ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
+		          0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 1 8
+				 0 0 0 2 &ipic 1 8
+				 0 0 0 3 &ipic 1 8
+				 0 0 0 4 &ipic 1 8>;
+		sleep = <&pmc 0x00300000>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xa8000000
+				  0x02000000 0 0xa8000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+
+	pci2: pcie@e000a000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe000a000 0x00001000>;
+		ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 2 8
+				 0 0 0 2 &ipic 2 8
+				 0 0 0 3 &ipic 2 8
+				 0 0 0 4 &ipic 2 8>;
+		sleep = <&pmc 0x000c0000>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xc8000000
+				  0x02000000 0 0xc8000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+};
diff --git a/src/powerpc/mpc8378_rdb.dts b/src/powerpc/mpc8378_rdb.dts
new file mode 100644
index 000000000000..71842fcd621f
--- /dev/null
+++ b/src/powerpc/mpc8378_rdb.dts
@@ -0,0 +1,486 @@
+/*
+ * MPC8378E RDB Device Tree Source
+ *
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "fsl,mpc8378rdb";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8378@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;	// 256MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		// CS0 and CS1 are swapped when
+		// booting from nand, but the
+		// addresses are the same.
+		ranges = <0x0 0x0 0xfe000000 0x00800000
+		          0x1 0x0 0xe0600000 0x00008000
+		          0x2 0x0 0xf0000000 0x00020000
+		          0x3 0x0 0xfa000000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8378-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x8000>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			kernel@100000 {
+				reg = <0x100000 0x300000>;
+			};
+			fs@400000 {
+				reg = <0x400000 0x1c00000>;
+			};
+		};
+	};
+
+	immr@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		gpio1: gpio-controller@c00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio";
+			reg = <0xc00 0x100>;
+			interrupts = <74 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		gpio2: gpio-controller@d00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio";
+			reg = <0xd00 0x100>;
+			interrupts = <75 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		sleep-nexus {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x0c000000>;
+			ranges;
+
+			i2c@3000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				compatible = "fsl-i2c";
+				reg = <0x3000 0x100>;
+				interrupts = <14 0x8>;
+				interrupt-parent = <&ipic>;
+				dfsrr;
+
+				dtt@48 {
+					compatible = "national,lm75";
+					reg = <0x48>;
+				};
+
+				at24@50 {
+					compatible = "at24,24c256";
+					reg = <0x50>;
+				};
+
+				rtc@68 {
+					compatible = "dallas,ds1339";
+					reg = <0x68>;
+				};
+
+				mcu_pio: mcu@a {
+					#gpio-cells = <2>;
+					compatible = "fsl,mc9s08qg8-mpc8378erdb",
+						     "fsl,mcu-mpc8349emitx";
+					reg = <0x0a>;
+					gpio-controller;
+				};
+			};
+
+			sdhci@2e000 {
+				compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
+				reg = <0x2e000 0x1000>;
+				interrupts = <42 0x8>;
+				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
+				/* Filled in by U-Boot */
+				clock-frequency = <111111111>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			phy_type = "ulpi";
+			sleep = <&pmc 0x00c00000>;
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+			sleep = <&pmc 0xc0000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x2>;
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			fixed-link = <1 1 1000 0 0>;
+			tbi-handle = <&tbi1>;
+			sleep = <&pmc 0x30000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+			sleep = <&pmc 0x03000000>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
+
+				/* IDSEL AD14 IRQ6 inta */
+				 0x7000 0x0 0x0 0x1 &ipic 22 0x8
+
+				/* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
+				 0x7800 0x0 0x0 0x1 &ipic 21 0x8
+				 0x7800 0x0 0x0 0x2 &ipic 22 0x8
+				 0x7800 0x0 0x0 0x4 &ipic 23 0x8
+
+				/* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
+				 0xE000 0x0 0x0 0x1 &ipic 23 0x8
+				 0xE000 0x0 0x0 0x2 &ipic 21 0x8
+				 0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
+		sleep = <&pmc 0x00010000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+
+	pci1: pcie@e0009000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe0009000 0x00001000>;
+		ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
+		          0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 1 8
+				 0 0 0 2 &ipic 1 8
+				 0 0 0 3 &ipic 1 8
+				 0 0 0 4 &ipic 1 8>;
+		sleep = <&pmc 0x00300000>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xa8000000
+				  0x02000000 0 0xa8000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+
+	pci2: pcie@e000a000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe000a000 0x00001000>;
+		ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 2 8
+				 0 0 0 2 &ipic 2 8
+				 0 0 0 3 &ipic 2 8
+				 0 0 0 4 &ipic 2 8>;
+		sleep = <&pmc 0x000c0000>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xc8000000
+				  0x02000000 0 0xc8000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			gpios = <&mcu_pio 0 0>;
+			default-state = "on";
+		};
+
+		hdd {
+			gpios = <&mcu_pio 1 0>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+};
diff --git a/src/powerpc/mpc8379_mds.dts b/src/powerpc/mpc8379_mds.dts
new file mode 100644
index 000000000000..38e5048d65d2
--- /dev/null
+++ b/src/powerpc/mpc8379_mds.dts
@@ -0,0 +1,459 @@
+/*
+ * MPC8379E MDS Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "fsl,mpc8379emds";
+	compatible = "fsl,mpc8379emds","fsl,mpc837xmds";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8379@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;	// 512MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		// booting from NOR flash
+		ranges = <0 0x0 0xfe000000 0x02000000
+		          1 0x0 0xf8000000 0x00008000
+		          3 0x0 0xe0600000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0 0x0 0x2000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			fs@100000 {
+				reg = <0x100000 0x800000>;
+			};
+
+			kernel@1d00000 {
+				reg = <0x1d00000 0x200000>;
+			};
+
+			dtb@1f00000 {
+				reg = <0x1f00000 0x100000>;
+			};
+		};
+
+		bcsr@1,0 {
+			reg = <1 0x0 0x8000>;
+			compatible = "fsl,mpc837xmds-bcsr";
+		};
+
+		nand@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8379-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <3 0x0 0x8000>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			kernel@100000 {
+				reg = <0x100000 0x300000>;
+			};
+
+			fs@400000 {
+				reg = <0x400000 0x1c00000>;
+			};
+		};
+	};
+
+	soc@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		sleep-nexus {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x0c000000>;
+			ranges;
+
+			i2c@3000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				compatible = "fsl-i2c";
+				reg = <0x3000 0x100>;
+				interrupts = <14 0x8>;
+				interrupt-parent = <&ipic>;
+				dfsrr;
+
+				rtc@68 {
+					compatible = "dallas,ds1374";
+					reg = <0x68>;
+					interrupts = <19 0x8>;
+					interrupt-parent = <&ipic>;
+				};
+			};
+
+			sdhci@2e000 {
+				compatible = "fsl,mpc8379-esdhc", "fsl,esdhc";
+				reg = <0x2e000 0x1000>;
+				interrupts = <42 0x8>;
+				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
+				/* Filled in by U-Boot */
+				clock-frequency = <0>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			dr_mode = "host";
+			phy_type = "ulpi";
+			sleep = <&pmc 0x00c00000>;
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+			sleep = <&pmc 0xc0000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x2>;
+				};
+
+				phy3: ethernet-phy@3 {
+					interrupt-parent = <&ipic>;
+					interrupts = <18 0x8>;
+					reg = <0x3>;
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy3>;
+			sleep = <&pmc 0x30000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+			sleep = <&pmc 0x03000000>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			interrupts = <44 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x000000c0>;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			interrupts = <45 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x00000030>;
+		};
+
+		sata@1a000 {
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+			reg = <0x1a000 0x1000>;
+			interrupts = <46 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x0000000c>;
+		};
+
+		sata@1b000 {
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+			reg = <0x1b000 0x1000>;
+			interrupts = <47 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x00000003>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: pic@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+				/* IDSEL 0x11 */
+				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
+				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
+				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
+				 0x8800 0x0 0x0 0x4 &ipic 23 0x8
+
+				/* IDSEL 0x12 */
+				 0x9000 0x0 0x0 0x1 &ipic 22 0x8
+				 0x9000 0x0 0x0 0x2 &ipic 23 0x8
+				 0x9000 0x0 0x0 0x3 &ipic 20 0x8
+				 0x9000 0x0 0x0 0x4 &ipic 21 0x8
+
+				/* IDSEL 0x13 */
+				 0x9800 0x0 0x0 0x1 &ipic 23 0x8
+				 0x9800 0x0 0x0 0x2 &ipic 20 0x8
+				 0x9800 0x0 0x0 0x3 &ipic 21 0x8
+				 0x9800 0x0 0x0 0x4 &ipic 22 0x8
+
+				/* IDSEL 0x15 */
+				 0xa800 0x0 0x0 0x1 &ipic 20 0x8
+				 0xa800 0x0 0x0 0x2 &ipic 21 0x8
+				 0xa800 0x0 0x0 0x3 &ipic 22 0x8
+				 0xa800 0x0 0x0 0x4 &ipic 23 0x8
+
+				/* IDSEL 0x16 */
+				 0xb000 0x0 0x0 0x1 &ipic 23 0x8
+				 0xb000 0x0 0x0 0x2 &ipic 20 0x8
+				 0xb000 0x0 0x0 0x3 &ipic 21 0x8
+				 0xb000 0x0 0x0 0x4 &ipic 22 0x8
+
+				/* IDSEL 0x17 */
+				 0xb800 0x0 0x0 0x1 &ipic 22 0x8
+				 0xb800 0x0 0x0 0x2 &ipic 23 0x8
+				 0xb800 0x0 0x0 0x3 &ipic 20 0x8
+				 0xb800 0x0 0x0 0x4 &ipic 21 0x8
+
+				/* IDSEL 0x18 */
+				 0xc000 0x0 0x0 0x1 &ipic 21 0x8
+				 0xc000 0x0 0x0 0x2 &ipic 22 0x8
+				 0xc000 0x0 0x0 0x3 &ipic 23 0x8
+				 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0x0 0x0>;
+		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
+		sleep = <&pmc 0x00010000>;
+		clock-frequency = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+};
diff --git a/src/powerpc/mpc8379_rdb.dts b/src/powerpc/mpc8379_rdb.dts
new file mode 100644
index 000000000000..e442a29b2fe0
--- /dev/null
+++ b/src/powerpc/mpc8379_rdb.dts
@@ -0,0 +1,452 @@
+/*
+ * MPC8379E RDB Device Tree Source
+ *
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "fsl,mpc8379rdb";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8379@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;	// 256MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		// CS0 and CS1 are swapped when
+		// booting from nand, but the
+		// addresses are the same.
+		ranges = <0x0 0x0 0xfe000000 0x00800000
+		          0x1 0x0 0xe0600000 0x00008000
+		          0x2 0x0 0xf0000000 0x00020000
+		          0x3 0x0 0xfa000000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8379-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x8000>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			kernel@100000 {
+				reg = <0x100000 0x300000>;
+			};
+			fs@400000 {
+				reg = <0x400000 0x1c00000>;
+			};
+		};
+	};
+
+	immr@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		gpio1: gpio-controller@c00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio";
+			reg = <0xc00 0x100>;
+			interrupts = <74 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		gpio2: gpio-controller@d00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio";
+			reg = <0xd00 0x100>;
+			interrupts = <75 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		sleep-nexus {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x0c000000>;
+			ranges;
+
+			i2c@3000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				compatible = "fsl-i2c";
+				reg = <0x3000 0x100>;
+				interrupts = <14 0x8>;
+				interrupt-parent = <&ipic>;
+				dfsrr;
+
+				dtt@48 {
+					compatible = "national,lm75";
+					reg = <0x48>;
+				};
+
+				at24@50 {
+					compatible = "at24,24c256";
+					reg = <0x50>;
+				};
+
+				rtc@68 {
+					compatible = "dallas,ds1339";
+					reg = <0x68>;
+				};
+
+				mcu_pio: mcu@a {
+					#gpio-cells = <2>;
+					compatible = "fsl,mc9s08qg8-mpc8379erdb",
+						     "fsl,mcu-mpc8349emitx";
+					reg = <0x0a>;
+					gpio-controller;
+				};
+			};
+
+			sdhci@2e000 {
+				compatible = "fsl,mpc8379-esdhc", "fsl,esdhc";
+				reg = <0x2e000 0x1000>;
+				interrupts = <42 0x8>;
+				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
+				/* Filled in by U-Boot */
+				clock-frequency = <111111111>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			phy_type = "ulpi";
+			sleep = <&pmc 0x00c00000>;
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+			sleep = <&pmc 0xc0000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x2>;
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			fixed-link = <1 1 1000 0 0>;
+			tbi-handle = <&tbi1>;
+			sleep = <&pmc 0x30000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+			sleep = <&pmc 0x03000000>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			interrupts = <44 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x000000c0>;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			interrupts = <45 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x00000030>;
+		};
+
+		sata@1a000 {
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+			reg = <0x1a000 0x1000>;
+			interrupts = <46 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x0000000c>;
+		};
+
+		sata@1b000 {
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+			reg = <0x1b000 0x1000>;
+			interrupts = <47 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x00000003>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
+
+				/* IDSEL AD14 IRQ6 inta */
+				 0x7000 0x0 0x0 0x1 &ipic 22 0x8
+
+				/* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
+				 0x7800 0x0 0x0 0x1 &ipic 21 0x8
+				 0x7800 0x0 0x0 0x2 &ipic 22 0x8
+				 0x7800 0x0 0x0 0x4 &ipic 23 0x8
+
+				/* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
+				 0xE000 0x0 0x0 0x1 &ipic 23 0x8
+				 0xE000 0x0 0x0 0x2 &ipic 21 0x8
+				 0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0x0 0x0>;
+		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
+		sleep = <&pmc 0x00010000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			gpios = <&mcu_pio 0 0>;
+			default-state = "on";
+		};
+
+		hdd {
+			gpios = <&mcu_pio 1 0>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+};
diff --git a/src/powerpc/mpc8610_hpcd.dts b/src/powerpc/mpc8610_hpcd.dts
new file mode 100644
index 000000000000..6a109a0ceac9
--- /dev/null
+++ b/src/powerpc/mpc8610_hpcd.dts
@@ -0,0 +1,506 @@
+/*
+ * MPC8610 HPCD Device Tree Source
+ *
+ * Copyright 2007-2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under the terms of the GNU General Public License Version 2 as published
+ * by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "MPC8610HPCD";
+	compatible = "fsl,MPC8610HPCD";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8610@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;		// L1
+			i-cache-size = <32768>;		// L1
+			sleep = <&pmc 0x00008000 0	// core
+				 &pmc 0x00004000 0>;	// timebase
+			timebase-frequency = <0>;	// From uboot
+			bus-frequency = <0>;		// From uboot
+			clock-frequency = <0>;		// From uboot
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;	// 512M at 0x0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8610-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+		ranges = <0 0 0xf8000000 0x08000000
+			  1 0 0xf0000000 0x08000000
+			  2 0 0xe8400000 0x00008000
+			  4 0 0xe8440000 0x00008000
+			  5 0 0xe8480000 0x00008000
+			  6 0 0xe84c0000 0x00008000
+			  3 0 0xe8000000 0x00000020>;
+		sleep = <&pmc 0x08000000 0>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		flash@1,0 {
+			compatible = "cfi-flash";
+			reg = <1 0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		flash@2,0 {
+			compatible = "fsl,mpc8610-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <2 0 0x8000>;
+		};
+
+		flash@4,0 {
+			compatible = "fsl,mpc8610-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <4 0 0x8000>;
+		};
+
+		flash@5,0 {
+			compatible = "fsl,mpc8610-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <5 0 0x8000>;
+		};
+
+		flash@6,0 {
+			compatible = "fsl,mpc8610-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <6 0 0x8000>;
+		};
+
+		board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,fpga-pixis";
+			reg = <3 0 0x20>;
+			ranges = <0 3 0 0x20>;
+			interrupt-parent = <&mpic>;
+			interrupts = <8 8>;
+
+			sdcsr_pio: gpio-controller@a {
+				#gpio-cells = <2>;
+				compatible = "fsl,fpga-pixis-gpio-bank";
+				reg = <0xa 1>;
+				gpio-controller;
+			};
+		};
+	};
+
+	soc@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		compatible = "fsl,mpc8610-immr", "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		bus-frequency = <0>;
+
+		mcm-law@0 {
+			compatible = "fsl,mcm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		mcm@1000 {
+			compatible = "fsl,mpc8610-mcm", "fsl,mcm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			cs4270:codec@4f {
+				compatible = "cirrus,cs4270";
+				reg = <0x4f>;
+				/* MCLK source is a stand-alone oscillator */
+				clock-frequency = <12288000>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			sleep = <&pmc 0x00000004 0>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+			sleep = <&pmc 0x00000002 0>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+			sleep = <&pmc 0x00000008 0>;
+		};
+
+		spi@7000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc8610-spi", "fsl,spi";
+			reg = <0x7000 0x40>;
+			cell-index = <0>;
+			interrupts = <59 2>;
+			interrupt-parent = <&mpic>;
+			mode = "cpu";
+			gpios = <&sdcsr_pio 7 0>;
+			sleep = <&pmc 0x00000800 0>;
+
+			mmc-slot@0 {
+				compatible = "fsl,mpc8610hpcd-mmc-slot",
+					     "mmc-spi-slot";
+				reg = <0>;
+				gpios = <&sdcsr_pio 0 1   /* nCD */
+					 &sdcsr_pio 1 0>; /*  WP */
+				voltage-ranges = <3300 3300>;
+				spi-max-frequency = <50000000>;
+			};
+		};
+
+		display@2c000 {
+			compatible = "fsl,diu";
+			reg = <0x2c000 100>;
+			interrupts = <72 2>;
+			interrupt-parent = <&mpic>;
+			sleep = <&pmc 0x04000000 0>;
+		};
+
+		mpic: interrupt-controller@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8610-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8610-guts";
+			reg = <0xe0000 0x1000>;
+			ranges = <0 0xe0000 0x1000>;
+			fsl,has-rstcr;
+
+			pmc: power@70 {
+				compatible = "fsl,mpc8610-pmc",
+					     "fsl,mpc8641d-pmc";
+				reg = <0x70 0x20>;
+			};
+		};
+
+		wdt@e4000 {
+			compatible = "fsl,mpc8610-wdt";
+			reg = <0xe4000 0x100>;
+		};
+
+		ssi@16000 {
+			compatible = "fsl,mpc8610-ssi";
+			cell-index = <0>;
+			reg = <0x16000 0x100>;
+			interrupt-parent = <&mpic>;
+			interrupts = <62 2>;
+			fsl,mode = "i2s-slave";
+			codec-handle = <&cs4270>;
+			fsl,playback-dma = <&dma00>;
+			fsl,capture-dma = <&dma01>;
+			fsl,fifo-depth = <8>;
+			sleep = <&pmc 0 0x08000000>;
+		};
+
+		ssi@16100 {
+			compatible = "fsl,mpc8610-ssi";
+			status = "disabled";
+			cell-index = <1>;
+			reg = <0x16100 0x100>;
+			interrupt-parent = <&mpic>;
+			interrupts = <63 2>;
+			fsl,fifo-depth = <8>;
+			sleep = <&pmc 0 0x04000000>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma";
+			cell-index = <0>;
+			reg = <0x21300 0x4>; /* DMA general status register */
+			ranges = <0x0 0x21100 0x200>;
+			sleep = <&pmc 0x00000400 0>;
+
+			dma00: dma-channel@0 {
+				compatible = "fsl,mpc8610-dma-channel",
+					"fsl,ssi-dma-channel";
+				cell-index = <0>;
+				reg = <0x0 0x80>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma01: dma-channel@1 {
+				compatible = "fsl,mpc8610-dma-channel",
+					"fsl,ssi-dma-channel";
+				cell-index = <1>;
+				reg = <0x80 0x80>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@2 {
+				compatible = "fsl,mpc8610-dma-channel",
+					"fsl,eloplus-dma-channel";
+				cell-index = <2>;
+				reg = <0x100 0x80>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@3 {
+				compatible = "fsl,mpc8610-dma-channel",
+					"fsl,eloplus-dma-channel";
+				cell-index = <3>;
+				reg = <0x180 0x80>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma";
+			cell-index = <1>;
+			reg = <0xc300 0x4>; /* DMA general status register */
+			ranges = <0x0 0xc100 0x200>;
+			sleep = <&pmc 0x00000200 0>;
+
+			dma-channel@0 {
+				compatible = "fsl,mpc8610-dma-channel",
+					"fsl,eloplus-dma-channel";
+				cell-index = <0>;
+				reg = <0x0 0x80>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@1 {
+				compatible = "fsl,mpc8610-dma-channel",
+					"fsl,eloplus-dma-channel";
+				cell-index = <1>;
+				reg = <0x80 0x80>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@2 {
+				compatible = "fsl,mpc8610-dma-channel",
+					"fsl,eloplus-dma-channel";
+				cell-index = <2>;
+				reg = <0x100 0x80>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@3 {
+				compatible = "fsl,mpc8610-dma-channel",
+					"fsl,eloplus-dma-channel";
+				cell-index = <3>;
+				reg = <0x180 0x80>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+	};
+
+	pci0: pci@e0008000 {
+		compatible = "fsl,mpc8610-pci";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008000 0x1000>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xe1000000 0x0 0x00100000>;
+		sleep = <&pmc 0x80000000 0>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x11 */
+			0x8800 0 0 1 &mpic 4 1
+			0x8800 0 0 2 &mpic 5 1
+			0x8800 0 0 3 &mpic 6 1
+			0x8800 0 0 4 &mpic 7 1
+
+			/* IDSEL 0x12 */
+			0x9000 0 0 1 &mpic 5 1
+			0x9000 0 0 2 &mpic 6 1
+			0x9000 0 0 3 &mpic 7 1
+			0x9000 0 0 4 &mpic 4 1
+			>;
+	};
+
+	pci1: pcie@e000a000 {
+		compatible = "fsl,mpc8641-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe000a000 0x1000>;
+		bus-range = <1 3>;
+		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
+		sleep = <&pmc 0x40000000 0>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x1b */
+			0xd800 0 0 1 &mpic 2 1
+
+			/* IDSEL 0x1c*/
+			0xe000 0 0 1 &mpic 1 1
+			0xe000 0 0 2 &mpic 1 1
+			0xe000 0 0 3 &mpic 1 1
+			0xe000 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x1f */
+			0xf800 0 0 1 &mpic 3 2
+			0xf800 0 0 2 &mpic 0 1
+		>;
+
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0xa0000000
+				  0x02000000 0x0 0xa0000000
+				  0x0 0x10000000
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00100000>;
+			uli1575@0 {
+				reg = <0 0 0 0 0>;
+				#size-cells = <2>;
+				#address-cells = <3>;
+				ranges = <0x02000000 0x0 0xa0000000
+					  0x02000000 0x0 0xa0000000
+					  0x0 0x10000000
+					  0x01000000 0x0 0x00000000
+					  0x01000000 0x0 0x00000000
+					  0x0 0x00100000>;
+
+				isa@1e {
+					device_type = "isa";
+					#size-cells = <1>;
+					#address-cells = <2>;
+					reg = <0xf000 0 0 0 0>;
+					ranges = <1 0 0x01000000 0 0
+						  0x00001000>;
+
+					rtc@70 {
+						compatible = "pnpPNP,b00";
+						reg = <1 0x70 2>;
+					};
+				};
+			};
+		};
+	};
+
+	pci2: pcie@e0009000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8641-pcie";
+		reg = <0xe0009000 0x00001000>;
+		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xe2000000 0 0x00100000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0x0000 0 0 1 &mpic 4 1
+				 0x0000 0 0 2 &mpic 5 1
+				 0x0000 0 0 3 &mpic 6 1
+				 0x0000 0 0 4 &mpic 7 1>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		sleep = <&pmc 0x20000000 0>;
+		clock-frequency = <33333333>;
+	};
+};
diff --git a/src/powerpc/mpc866ads.dts b/src/powerpc/mpc866ads.dts
new file mode 100644
index 000000000000..34c1f48b1a09
--- /dev/null
+++ b/src/powerpc/mpc866ads.dts
@@ -0,0 +1,190 @@
+/*
+ * MPC866 ADS Device Tree Source
+ *
+ * Copyright 2006 MontaVista Software, Inc.
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "MPC866ADS";
+	compatible = "fsl,mpc866ads";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,866@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <16>;	// 16 bytes
+			i-cache-line-size = <16>;	// 16 bytes
+			d-cache-size = <0x2000>;		// L1, 8K
+			i-cache-size = <0x4000>;		// L1, 16K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			interrupts = <15 2>;	// decrementer interrupt
+			interrupt-parent = <&PIC>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x800000>;
+	};
+
+	localbus@ff000100 {
+		compatible = "fsl,mpc866-localbus", "fsl,pq1-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xff000100 0x40>;
+
+		ranges = <
+			0x1 0x0 0xff080000 0x8000
+			0x5 0x0 0xff0a0000 0x8000
+		>;
+
+		board-control@1,0 {
+			reg = <0x1 0x0 0x20 0x5 0x300 0x4>;
+			compatible = "fsl,mpc866ads-bcsr";
+		};
+	};
+
+	soc@ff000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xff000000 0x100000>;
+		reg = <0xff000000 0x200>;
+		bus-frequency = <0>;
+
+		mdio@e00 {
+			compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio";
+			reg = <0xe00 0x188>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			PHY: ethernet-phy@f {
+				reg = <0xf>;
+			};
+		};
+
+		ethernet@e00 {
+			device_type = "network";
+			compatible = "fsl,mpc866-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <0xe00 0x188>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <3 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY>;
+			linux,network-index = <0>;
+		};
+
+		PIC: pic@0 {
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x0 0x24>;
+			compatible = "fsl,mpc866-pic", "fsl,pq1-pic";
+		};
+
+		cpm@9c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc866-cpm", "fsl,cpm1";
+			ranges;
+			reg = <0x9c0 0x40>;
+			brg-frequency = <0>;
+			interrupts = <0 2>;	// cpm error interrupt
+			interrupt-parent = <&CPM_PIC>;
+
+			muram@2000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x2000 0x2000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x1c00>;
+				};
+			};
+
+			brg@9f0 {
+				compatible = "fsl,mpc866-brg",
+					     "fsl,cpm1-brg",
+					     "fsl,cpm-brg";
+				reg = <0x9f0 0x10>;
+				clock-frequency = <0>;
+			};
+
+			CPM_PIC: pic@930 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupts = <5 2 0 2>;
+				interrupt-parent = <&PIC>;
+				reg = <0x930 0x20>;
+				compatible = "fsl,mpc866-cpm-pic",
+				             "fsl,cpm1-pic";
+			};
+
+
+			serial@a80 {
+				device_type = "serial";
+				compatible = "fsl,mpc866-smc-uart",
+				             "fsl,cpm1-smc-uart";
+				reg = <0xa80 0x10 0x3e80 0x40>;
+				interrupts = <4>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x90>;
+			};
+
+			serial@a90 {
+				device_type = "serial";
+				compatible = "fsl,mpc866-smc-uart",
+				             "fsl,cpm1-smc-uart";
+				reg = <0xa90 0x10 0x3f80 0x40>;
+				interrupts = <3>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <0xd0>;
+			};
+
+			ethernet@a00 {
+				device_type = "network";
+				compatible = "fsl,mpc866-scc-enet",
+				             "fsl,cpm1-scc-enet";
+				reg = <0xa00 0x18 0x3c00 0x100>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				interrupts = <30>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-command = <0000>;
+				linux,network-index = <1>;
+			};
+
+			i2c@860 {
+				compatible = "fsl,mpc866-i2c",
+					     "fsl,cpm1-i2c";
+				reg = <0x860 0x20 0x3c80 0x30>;
+				interrupts = <16>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-command = <0x10>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/soc/cpm/serial@a80";
+	};
+};
diff --git a/src/powerpc/mpc885ads.dts b/src/powerpc/mpc885ads.dts
new file mode 100644
index 000000000000..4e93bd961e0f
--- /dev/null
+++ b/src/powerpc/mpc885ads.dts
@@ -0,0 +1,232 @@
+/*
+ * MPC885 ADS Device Tree Source
+ *
+ * Copyright 2006 MontaVista Software, Inc.
+ * Copyright 2007,2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "MPC885ADS";
+	compatible = "fsl,mpc885ads";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,885@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <16>;
+			i-cache-line-size = <16>;
+			d-cache-size = <8192>;
+			i-cache-size = <8192>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			interrupts = <15 2>;	// decrementer interrupt
+			interrupt-parent = <&PIC>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	localbus@ff000100 {
+		compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xff000100 0x40>;
+
+		ranges = <
+			0x0 0x0 0xfe000000 0x800000
+			0x1 0x0 0xff080000 0x8000
+			0x5 0x0 0xff0a0000 0x8000
+		>;
+
+		flash@0,0 {
+			compatible = "jedec-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <4>;
+			device-width = <1>;
+		};
+
+		board-control@1,0 {
+			reg = <0x1 0x0 0x20 0x5 0x300 0x4>;
+			compatible = "fsl,mpc885ads-bcsr";
+		};
+	};
+
+	soc@ff000000 {
+		compatible = "fsl,mpc885", "fsl,pq1-soc";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xff000000 0x4000>;
+		bus-frequency = <0>;
+
+		// Temporary -- will go away once kernel uses ranges for get_immrbase().
+		reg = <0xff000000 0x4000>;
+
+		mdio@e00 {
+			compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
+			reg = <0xe00 0x188>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			PHY0: ethernet-phy@0 {
+				reg = <0x0>;
+			};
+
+			PHY1: ethernet-phy@1 {
+				reg = <0x1>;
+			};
+
+			PHY2: ethernet-phy@2 {
+				reg = <0x2>;
+			};
+		};
+
+		ethernet@e00 {
+			device_type = "network";
+			compatible = "fsl,mpc885-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <0xe00 0x188>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <3 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY0>;
+			linux,network-index = <0>;
+		};
+
+		ethernet@1e00 {
+			device_type = "network";
+			compatible = "fsl,mpc885-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <0x1e00 0x188>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <7 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY1>;
+			linux,network-index = <1>;
+		};
+
+		PIC: interrupt-controller@0 {
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x0 0x24>;
+			compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
+		};
+
+		pcmcia@80 {
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			compatible = "fsl,pq-pcmcia";
+			device_type = "pcmcia";
+			reg = <0x80 0x80>;
+			interrupt-parent = <&PIC>;
+			interrupts = <13 1>;
+		};
+
+		cpm@9c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc885-cpm", "fsl,cpm1";
+			command-proc = <0x9c0>;
+			interrupts = <0>;	// cpm error interrupt
+			interrupt-parent = <&CPM_PIC>;
+			reg = <0x9c0 0x40>;
+			ranges;
+
+			muram@2000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x2000 0x2000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x1c00>;
+				};
+			};
+
+			brg@9f0 {
+				compatible = "fsl,mpc885-brg",
+				             "fsl,cpm1-brg",
+				             "fsl,cpm-brg";
+				clock-frequency = <0>;
+				reg = <0x9f0 0x10>;
+			};
+
+			CPM_PIC: interrupt-controller@930 {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupts = <5 2 0 2>;
+				interrupt-parent = <&PIC>;
+				reg = <0x930 0x20>;
+				compatible = "fsl,mpc885-cpm-pic",
+				             "fsl,cpm1-pic";
+			};
+
+			serial@a80 {
+				device_type = "serial";
+				compatible = "fsl,mpc885-smc-uart",
+				             "fsl,cpm1-smc-uart";
+				reg = <0xa80 0x10 0x3e80 0x40>;
+				interrupts = <4>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x90>;
+			};
+
+			serial@a90 {
+				device_type = "serial";
+				compatible = "fsl,mpc885-smc-uart",
+				             "fsl,cpm1-smc-uart";
+				reg = <0xa90 0x10 0x3f80 0x40>;
+				interrupts = <3>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <0xd0>;
+			};
+
+			ethernet@a40 {
+				device_type = "network";
+				compatible = "fsl,mpc885-scc-enet",
+				             "fsl,cpm1-scc-enet";
+				reg = <0xa40 0x18 0x3e00 0x100>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				interrupts = <28>;
+				interrupt-parent = <&CPM_PIC>;
+				phy-handle = <&PHY2>;
+				fsl,cpm-command = <0x80>;
+				linux,network-index = <2>;
+			};
+
+			i2c@860 {
+				compatible = "fsl,mpc885-i2c",
+					     "fsl,cpm1-i2c";
+				reg = <0x860 0x20 0x3c80 0x30>;
+				interrupts = <16>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-command = <0x10>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/soc/cpm/serial@a80";
+	};
+};
diff --git a/src/powerpc/mucmc52.dts b/src/powerpc/mucmc52.dts
new file mode 100644
index 000000000000..d3a792bb5c1a
--- /dev/null
+++ b/src/powerpc/mucmc52.dts
@@ -0,0 +1,226 @@
+/*
+ * Manroland mucmc52 board Device Tree Source
+ *
+ * Copyright (C) 2009 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+/* Timer pins that need to be in GPIO mode */
+&gpt0 { gpio-controller; };
+&gpt1 { gpio-controller; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+
+/* Disabled timers */
+&gpt4 { status = "disabled"; };
+&gpt5 { status = "disabled"; };
+&gpt6 { status = "disabled"; };
+&gpt7 { status = "disabled"; };
+
+/ {
+	model = "manroland,mucmc52";
+	compatible = "manroland,mucmc52";
+
+	soc5200@f0000000 {
+		rtc@800 {
+			status = "disabled";
+		};
+
+		can@900 {
+			status = "disabled";
+		};
+
+		can@980 {
+			status = "disabled";
+		};
+
+		spi@f00 {
+			status = "disabled";
+		};
+
+		usb@1000 {
+			status = "disabled";
+		};
+
+		psc@2000 {		// PSC1
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2200 {		// PSC2
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2400 {		// PSC3
+			status = "disabled";
+		};
+
+		psc@2600 {		// PSC4
+			status = "disabled";
+		};
+
+		psc@2800 {		// PSC5
+			status = "disabled";
+		};
+
+		psc@2c00 {		// PSC6
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@0 {
+				compatible = "intel,lxt971";
+				reg = <0>;
+			};
+		};
+
+		i2c@3d00 {
+			status = "disabled";
+		};
+
+		i2c@3d40 {
+			hwmon@2c {
+				compatible = "ad,adm9240";
+				reg = <0x2c>;
+			};
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+	};
+
+	pci@f0000d00 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				/* IDSEL 0x10 */
+				0x8000 0 0 1 &mpc5200_pic 0 3 3
+				0x8000 0 0 2 &mpc5200_pic 0 3 3
+				0x8000 0 0 3 &mpc5200_pic 0 2 3
+				0x8000 0 0 4 &mpc5200_pic 0 1 3
+				>;
+		ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000
+			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+	};
+
+	localbus {
+		ranges = <0 0 0xff800000 0x00800000
+			  1 0 0x80000000 0x00800000
+			  3 0 0x80000000 0x00800000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x00800000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+			partition@0 {
+				label = "DTS";
+				reg = <0x0 0x00100000>;
+			};
+			partition@100000 {
+				label = "Kernel";
+				reg = <0x100000 0x00200000>;
+			};
+			partition@300000 {
+				label = "RootFS";
+				reg = <0x00300000 0x00200000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x00200000>;
+			};
+			partition@700000 {
+				label = "U-Boot";
+				reg = <0x00700000 0x00040000>;
+			};
+			partition@740000 {
+				label = "Env";
+				reg = <0x00740000 0x00020000>;
+			};
+			partition@760000 {
+				label = "red. Env";
+				reg = <0x00760000 0x00020000>;
+			};
+			partition@780000 {
+				label = "reserve";
+				reg = <0x00780000 0x00080000>;
+			};
+		};
+
+		simple100: gpio-controller-100@3,600100 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600100 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple104: gpio-controller-104@3,600104 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600104 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple200: gpio-controller-200@3,600200 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600200 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple201: gpio-controller-201@3,600201 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600201 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple202: gpio-controller-202@3,600202 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600202 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple203: gpio-controller-203@3,600203 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600203 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple204: gpio-controller-204@3,600204 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600204 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple206: gpio-controller-206@3,600206 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600206 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple207: gpio-controller-207@3,600207 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600207 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple20f: gpio-controller-20f@3,60020f {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x0060020f 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+	};
+};
diff --git a/src/powerpc/mvme5100.dts b/src/powerpc/mvme5100.dts
new file mode 100644
index 000000000000..1ecb341a232a
--- /dev/null
+++ b/src/powerpc/mvme5100.dts
@@ -0,0 +1,185 @@
+/*
+ * Device Tree Source for Motorola/Emerson MVME5100.
+ *
+ * Copyright 2013 CSC Australia Pty. Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "MVME5100";
+	compatible = "MVME5100";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &serial0;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,7410 {
+			device_type = "cpu";
+			reg = <0x0>;
+			/* Following required by dtc but not used */
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			timebase-frequency = <25000000>;
+			clock-frequency = <500000000>;
+			bus-frequency = <100000000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
+
+	hawk@fef80000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "hawk-bridge", "simple-bus";
+		ranges = <0x0 0xfef80000 0x10000>;
+		reg = <0xfef80000 0x10000>;
+
+		serial0: serial@8000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x8000 0x80>;
+			reg-shift = <4>;
+			clock-frequency = <1843200>;
+			current-speed = <9600>;
+			interrupts = <1 1>; // IRQ1 Level Active Low.
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@8200 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x8200 0x80>;
+			reg-shift = <4>;
+			clock-frequency = <1843200>;
+			current-speed = <9600>;
+			interrupts = <1 1>; // IRQ1 Level Active Low.
+			interrupt-parent = <&mpic>;
+		};
+
+		mpic: interrupt-controller@f3f80000 {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			device_type = "open-pic";
+			compatible = "chrp,open-pic";
+			interrupt-controller;
+			reg = <0xf3f80000 0x40000>;
+		};
+	};
+
+	pci0: pci@feff0000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "hawk-pci";
+		reg = <0xfec00000 0x400000>;
+		8259-interrupt-acknowledge = <0xfeff0030>;
+		ranges = <0x1000000 0x0        0x0 0xfe000000 0x0 0x800000
+			  0x2000000 0x0 0x80000000 0x80000000 0x0 0x74000000>;
+		bus-range = <0 255>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/*
+			 * This definition (IDSEL 11) duplicates the
+			 * interrupts definition in the i8259
+			 * interrupt controller below.
+			 *
+			 * Do not change the interrupt sense/polarity from
+			 * 0x2 to anything else, doing so will cause endless
+			 * "spurious" i8259 interrupts to be fielded.
+			 */
+			// IDSEL 11 - iPMC712 PCI/ISA Bridge
+			0x5800 0x0 0x0 0x1 &mpic 0x0 0x2
+			0x5800 0x0 0x0 0x2 &mpic 0x0 0x2
+			0x5800 0x0 0x0 0x3 &mpic 0x0 0x2
+			0x5800 0x0 0x0 0x4 &mpic 0x0 0x2
+
+			/* IDSEL 12 - Not Used */
+
+			/* IDSEL 13 - Universe VME Bridge */
+			0x6800 0x0 0x0 0x1 &mpic 0x5 0x1
+			0x6800 0x0 0x0 0x2 &mpic 0x6 0x1
+			0x6800 0x0 0x0 0x3 &mpic 0x7 0x1
+			0x6800 0x0 0x0 0x4 &mpic 0x8 0x1
+
+			/* IDSEL 14 - ENET 1 */
+			0x7000 0x0 0x0 0x1 &mpic 0x2 0x1
+
+			/* IDSEL 15 - Not Used */
+
+			/* IDSEL 16 - PMC Slot 1 */
+			0x8000 0x0 0x0 0x1 &mpic 0x9 0x1
+			0x8000 0x0 0x0 0x2 &mpic 0xa 0x1
+			0x8000 0x0 0x0 0x3 &mpic 0xb 0x1
+			0x8000 0x0 0x0 0x4 &mpic 0xc 0x1
+
+			/* IDSEL 17 - PMC Slot 2 */
+			0x8800 0x0 0x0 0x1 &mpic 0xc 0x1
+			0x8800 0x0 0x0 0x2 &mpic 0x9 0x1
+			0x8800 0x0 0x0 0x3 &mpic 0xa 0x1
+			0x8800 0x0 0x0 0x4 &mpic 0xb 0x1
+
+			/* IDSEL 18 - Not Used */
+
+			/* IDSEL 19 - ENET 2 */
+			0x9800 0x0 0x0 0x1 &mpic 0xd 0x1
+
+			/* IDSEL 20 - PMCSPAN (PCI-X) */
+			0xa000 0x0 0x0 0x1 &mpic 0x9 0x1
+			0xa000 0x0 0x0 0x2 &mpic 0xa 0x1
+			0xa000 0x0 0x0 0x3 &mpic 0xb 0x1
+			0xa000 0x0 0x0 0x4 &mpic 0xc 0x1
+
+		>;
+
+		isa {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			#interrupt-cells = <2>;
+			device_type = "isa";
+			compatible = "isa";
+			ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>;
+			interrupt-parent = <&i8259>;
+
+			i8259: interrupt-controller@20 {
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				interrupts = <0 2>;
+				device_type = "interrupt-controller";
+				compatible = "chrp,iic";
+				interrupt-controller;
+				reg = <1 0x00000020 0x00000002
+                                       1 0x000000a0 0x00000002
+                                       1 0x000004d0 0x00000002>;
+				interrupt-parent = <&mpic>;
+			};
+
+		};
+
+	};
+
+	chosen {
+		linux,stdout-path = &serial0;
+        };
+
+};
diff --git a/src/powerpc/o2d.dts b/src/powerpc/o2d.dts
new file mode 100644
index 000000000000..9f6dd4d889b3
--- /dev/null
+++ b/src/powerpc/o2d.dts
@@ -0,0 +1,47 @@
+/*
+ * O2D Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+	model = "ifm,o2d";
+	compatible = "ifm,o2d";
+
+	memory {
+		reg = <0x00000000 0x08000000>;  // 128MB
+	};
+
+	localbus {
+		ranges = <0 0 0xfc000000 0x02000000
+			  3 0 0xe3000000 0x00100000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@60000 {
+				label = "kernel";
+				reg = <0x00060000 0x00260000>;
+				read-only;
+			};
+			/* o2d specific partitions */
+			partition@2c0000 {
+				label = "o2d user defined";
+				reg = <0x002c0000 0x01d40000>;
+			};
+		};
+	};
+};
diff --git a/src/powerpc/o2d.dtsi b/src/powerpc/o2d.dtsi
new file mode 100644
index 000000000000..cf073e693f24
--- /dev/null
+++ b/src/powerpc/o2d.dtsi
@@ -0,0 +1,122 @@
+/*
+ * O2D base Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 {
+	gpio-controller;
+	fsl,has-wdt;
+	fsl,wdt-on-boot = <0>;
+};
+&gpt1 { gpio-controller; };
+
+/ {
+	model = "ifm,o2d";
+	compatible = "ifm,o2d";
+
+	memory {
+		reg = <0x00000000 0x04000000>;	// 64MB
+	};
+
+	soc5200@f0000000 {
+
+		rtc@800 {
+			status = "disabled";
+		};
+
+		psc@2000 {		// PSC1
+			compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+
+			spidev@0 {
+				compatible = "spidev";
+				spi-max-frequency = <250000>;
+				reg = <0>;
+			};
+		};
+
+		psc@2200 {		// PSC2
+			status = "disabled";
+		};
+
+		psc@2400 {		// PSC3
+			status = "disabled";
+		};
+
+		psc@2600 {		// PSC4
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2800 {		// PSC5
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2c00 {		// PSC6
+			status = "disabled";
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+	};
+
+	localbus {
+		ranges = <0 0 0xff000000 0x01000000
+			  3 0 0xe3000000 0x00100000>;
+
+		// flash device at LocalPlus Bus CS0
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x01000000>;
+			bank-width = <1>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+			no-unaligned-direct-access;
+
+			/* common layout for all machines */
+			partition@0 {
+				label = "u-boot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "env";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+		};
+
+		csi@3,0 {
+			compatible = "ifm,o2d-csi";
+			reg = <3 0 0x00100000>;
+			ifm,csi-clk-handle = <&gpt7>;
+			gpios = <&gpio_simple 23 0	/* imag_capture */
+				 &gpio_simple 26 0	/* imag_reset */
+				 &gpio_simple 29 0>;	/* imag_master_en */
+
+			interrupts = <1 1 2>;		/* IRQ1, edge falling */
+
+			ifm,csi-addr-bus-width = <24>;
+			ifm,csi-data-bus-width = <8>;
+			ifm,csi-wait-cycles = <0>;
+		};
+	};
+};
diff --git a/src/powerpc/o2d300.dts b/src/powerpc/o2d300.dts
new file mode 100644
index 000000000000..29affe0f0da3
--- /dev/null
+++ b/src/powerpc/o2d300.dts
@@ -0,0 +1,52 @@
+/*
+ * O2D300 Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+	model = "ifm,o2d300";
+	compatible = "ifm,o2d";
+
+	localbus {
+		ranges = <0 0 0xfc000000 0x02000000
+			  3 0 0xe3000000 0x00100000>;
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@40000 {
+				label = "env_1";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+			partition@60000 {
+				label = "env_2";
+				reg = <0x00060000 0x00020000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "kernel";
+				reg = <0x00080000 0x00260000>;
+				read-only;
+			};
+			/* o2d300 specific partitions */
+			partition@2e0000 {
+				label = "o2d300 user defined";
+				reg = <0x002e0000 0x01d20000>;
+			};
+		};
+	};
+};
diff --git a/src/powerpc/o2dnt2.dts b/src/powerpc/o2dnt2.dts
new file mode 100644
index 000000000000..a0f5b97a4f06
--- /dev/null
+++ b/src/powerpc/o2dnt2.dts
@@ -0,0 +1,48 @@
+/*
+ * O2DNT2 Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+	model = "ifm,o2dnt2";
+	compatible = "ifm,o2d";
+
+	memory {
+		reg = <0x00000000 0x08000000>;  // 128MB
+	};
+
+	localbus {
+		ranges = <0 0 0xfc000000 0x02000000
+			  3 0 0xe3000000 0x00100000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@60000 {
+				label = "kernel";
+				reg = <0x00060000 0x00260000>;
+				read-only;
+			};
+
+			/* o2dnt2 specific partitions */
+			partition@2c0000 {
+				label = "o2dnt2 user defined";
+				reg = <0x002c0000 0x01d40000>;
+			};
+		};
+	};
+};
diff --git a/src/powerpc/o2i.dts b/src/powerpc/o2i.dts
new file mode 100644
index 000000000000..e3cc99d1360b
--- /dev/null
+++ b/src/powerpc/o2i.dts
@@ -0,0 +1,33 @@
+/*
+ * O2I Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+	model = "ifm,o2i";
+	compatible = "ifm,o2d";
+
+	localbus {
+		flash@0,0 {
+			partition@60000 {
+				label = "kernel";
+				reg = <0x00060000 0x00260000>;
+				read-only;
+			};
+			/* o2i specific partitions */
+			partition@2c0000 {
+				label = "o2i user defined";
+				reg = <0x002c0000 0x00d40000>;
+			};
+		};
+	};
+};
diff --git a/src/powerpc/o2mnt.dts b/src/powerpc/o2mnt.dts
new file mode 100644
index 000000000000..d91859a9e940
--- /dev/null
+++ b/src/powerpc/o2mnt.dts
@@ -0,0 +1,33 @@
+/*
+ * O2MNT Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+	model = "ifm,o2mnt";
+	compatible = "ifm,o2d";
+
+	localbus {
+		flash@0,0 {
+			partition@60000 {
+				label = "kernel";
+				reg = <0x00060000 0x00260000>;
+				read-only;
+			};
+			/* add o2mnt specific partitions */
+			partition@2c0000 {
+				label = "o2mnt user defined";
+				reg = <0x002c0000 0x00d40000>;
+			};
+		};
+	};
+};
diff --git a/src/powerpc/o3dnt.dts b/src/powerpc/o3dnt.dts
new file mode 100644
index 000000000000..acce49326491
--- /dev/null
+++ b/src/powerpc/o3dnt.dts
@@ -0,0 +1,48 @@
+/*
+ * O3DNT Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+	model = "ifm,o3dnt";
+	compatible = "ifm,o2d";
+
+	memory {
+		reg = <0x00000000 0x04000000>;  // 64MB
+	};
+
+	localbus {
+		ranges = <0 0 0xfc000000 0x01000000
+			  3 0 0xe3000000 0x00100000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x01000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@60000 {
+				label = "kernel";
+				reg = <0x00060000 0x00260000>;
+				read-only;
+			};
+
+			/* o3dnt specific partitions */
+			partition@2c0000 {
+				label = "o3dnt user defined";
+				reg = <0x002c0000 0x00d40000>;
+			};
+		};
+	};
+};
diff --git a/src/powerpc/obs600.dts b/src/powerpc/obs600.dts
new file mode 100644
index 000000000000..18e7d79ee4c3
--- /dev/null
+++ b/src/powerpc/obs600.dts
@@ -0,0 +1,314 @@
+/*
+ * Device Tree Source for PlatHome OpenBlockS 600 (405EX)
+ *
+ * Copyright 2011 Ben Herrenschmidt, IBM Corp.
+ *
+ * Based on Kilauea by:
+ *
+ * Copyright 2007-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "PlatHome,OpenBlockS 600";
+	compatible = "plathome,obs600";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,405EX";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>; /* 16 kB */
+			d-cache-size = <16384>; /* 16 kB */
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller {
+		compatible = "ibm,uic-405ex", "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-405ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-405ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	CPM0: cpm {
+		compatible = "ibm,cpm";
+		dcr-access-method = "native";
+		dcr-reg = <0x0b0 0x003>;
+		unused-units = <0x00000000>;
+		idle-doze = <0x02000000>;
+		standby = <0xe3e74800>;
+	};
+
+	plb {
+		compatible = "ibm,plb-405ex", "ibm,plb4";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: memory-controller {
+			compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2";
+			dcr-reg = <0x010 0x002>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x5 0x4	/* ECC DED Error */
+				      0x6 0x4>;	/* ECC SEC Error */
+		};
+
+		CRYPTO: crypto@ef700000 {
+			compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto";
+			reg = <0xef700000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x17 0x2>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-405ex", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x80000000 0x80000000 0x10000000
+				  0xef600000 0xef600000 0x00a00000
+				  0xf0000000 0xf0000000 0x10000000>;
+			dcr-reg = <0x0a0 0x005>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-405ex", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x5 0x1>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl512n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x08000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel + initrd";
+						reg = <0x00000000 0x03de0000>;
+					};
+					partition@3de0000 {
+						label = "user config area";
+						reg = <0x03de0000 0x00080000>;
+					};
+					partition@3e60000 {
+						label = "user program area";
+						reg = <0x03e60000 0x04000000>;
+					};
+					partition@7e60000 {
+						label = "flat device tree";
+						reg = <0x07e60000 0x00080000>;
+					};
+					partition@7ee0000 {
+						label = "test program";
+						reg = <0x07ee0000 0x00080000>;
+					};
+					partition@7f60000 {
+						label = "u-boot env";
+						reg = <0x07f60000 0x00040000>;
+					};
+					partition@7fa0000 {
+						label = "u-boot";
+						reg = <0x07fa0000 0x00060000>;
+					};
+				};
+			};
+
+			UART0: serial@ef600200 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600200 0x00000008>;
+				virtual-reg = <0xef600200>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1a 0x4>;
+			};
+
+			UART1: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@ef600400 {
+				compatible = "ibm,iic-405ex", "ibm,iic";
+				reg = <0xef600400 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				rtc@68 {
+					compatible = "dallas,ds1340";
+					reg = <0x68>;
+				};
+			};
+
+			IIC1: i2c@ef600500 {
+				compatible = "ibm,iic-405ex", "ibm,iic";
+				reg = <0xef600500 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x7 0x4>;
+			};
+
+			RGMII0: emac-rgmii@ef600b00 {
+				compatible = "ibm,rgmii-405ex", "ibm,rgmii";
+				reg = <0xef600b00 0x00000104>;
+				has-mdio;
+			};
+
+			EMAC0: ethernet@ef600900 {
+				linux,network-index = <0x0>;
+				device_type = "network";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600900 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600a00 {
+				linux,network-index = <0x1>;
+				device_type = "network";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
+				reg = <0xef600a00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			GPIO: gpio@ef600800 {
+				device_type = "gpio";
+				compatible = "ibm,gpio-405ex", "ibm,ppc4xx-gpio";
+				reg = <0xef600800 0x50>;
+			};
+		};
+	};
+        chosen {
+                linux,stdout-path = "/plb/opb/serial@ef600200";
+        };
+};
diff --git a/src/powerpc/pcm030.dts b/src/powerpc/pcm030.dts
new file mode 100644
index 000000000000..192e66af0001
--- /dev/null
+++ b/src/powerpc/pcm030.dts
@@ -0,0 +1,110 @@
+/*
+ * phyCORE-MPC5200B-tiny (pcm030) board Device Tree Source
+ *
+ * Copyright 2006 Pengutronix
+ * Sascha Hauer <s.hauer@pengutronix.de>
+ * Copyright 2007 Pengutronix
+ * Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 { fsl,has-wdt; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+&gpt6 { gpio-controller; };
+&gpt7 { gpio-controller; };
+
+/ {
+	model = "phytec,pcm030";
+	compatible = "phytec,pcm030";
+
+	soc5200@f0000000 {
+		audioplatform: psc@2000 { /* PSC1 in ac97 mode */
+			compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
+			cell-index = <0>;
+		};
+
+		/* PSC2 port is used by CAN1/2 */
+		psc@2200 {
+			status = "disabled";
+		};
+
+		psc@2400 { /* PSC3 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		/* PSC4 is ??? */
+		psc@2600 {
+			status = "disabled";
+		};
+
+		/* PSC5 is ??? */
+		psc@2800 {
+			status = "disabled";
+		};
+
+		psc@2c00 { /* PSC6 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		i2c@3d40 {
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+			eeprom@52 {
+				compatible = "catalyst,24c32";
+				reg = <0x52>;
+				pagesize = <32>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	pci@f0000d00 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
+				 0xc000 0 0 2 &mpc5200_pic 1 1 3
+				 0xc000 0 0 3 &mpc5200_pic 1 2 3
+				 0xc000 0 0 4 &mpc5200_pic 1 3 3
+
+				 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
+				 0xc800 0 0 2 &mpc5200_pic 1 2 3
+				 0xc800 0 0 3 &mpc5200_pic 1 3 3
+				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+	};
+
+	localbus {
+		status = "disabled";
+	};
+
+	sound {
+		compatible = "phytec,pcm030-audio-fabric";
+		asoc-platform = <&audioplatform>;
+	};
+};
diff --git a/src/powerpc/pcm032.dts b/src/powerpc/pcm032.dts
new file mode 100644
index 000000000000..96b139bf50e9
--- /dev/null
+++ b/src/powerpc/pcm032.dts
@@ -0,0 +1,189 @@
+/*
+ * phyCORE-MPC5200B-IO (pcm032) board Device Tree Source
+ *
+ * Copyright (C) 2006-2009 Pengutronix
+ * Sascha Hauer <s.hauer@pengutronix.de>
+ * Juergen Beisert <j.beisert@pengutronix.de>
+ * Wolfram Sang <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 { fsl,has-wdt; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+&gpt6 { gpio-controller; };
+&gpt7 { gpio-controller; };
+
+/ {
+	model = "phytec,pcm032";
+	compatible = "phytec,pcm032";
+
+	memory {
+		reg = <0x00000000 0x08000000>;	// 128MB
+	};
+
+	soc5200@f0000000 {
+		psc@2000 {	/* PSC1 is ac97 */
+			compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
+			cell-index = <0>;
+		};
+
+		/* PSC2 port is used by CAN1/2 */
+		psc@2200 {
+			status = "disabled";
+		};
+
+		psc@2400 { /* PSC3 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		/* PSC4 is ??? */
+		psc@2600 {
+			status = "disabled";
+		};
+
+		/* PSC5 is ??? */
+		psc@2800 {
+			status = "disabled";
+		};
+
+		psc@2c00 { /* PSC6 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		i2c@3d40 {
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+			eeprom@52 {
+				compatible = "catalyst,24c32";
+				reg = <0x52>;
+				pagesize = <32>;
+			};
+		};
+	};
+
+	pci@f0000d00 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
+				 0xc000 0 0 2 &mpc5200_pic 1 1 3
+				 0xc000 0 0 3 &mpc5200_pic 1 2 3
+				 0xc000 0 0 4 &mpc5200_pic 1 3 3
+
+				 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
+				 0xc800 0 0 2 &mpc5200_pic 1 2 3
+				 0xc800 0 0 3 &mpc5200_pic 1 3 3
+				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+	};
+
+	localbus {
+		ranges = <0 0 0xfe000000 0x02000000
+			  1 0 0xfc000000 0x02000000
+			  2 0 0xfbe00000 0x00200000
+			  3 0 0xf9e00000 0x02000000
+			  4 0 0xf7e00000 0x02000000
+			  5 0 0xe6000000 0x02000000
+			  6 0 0xe8000000 0x02000000
+			  7 0 0xea000000 0x02000000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <4>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@0 {
+				label = "ubootl";
+				reg = <0x00000000 0x00040000>;
+			};
+			partition@40000 {
+				label = "kernel";
+				reg = <0x00040000 0x001c0000>;
+			};
+			partition@200000 {
+				label = "jffs2";
+				reg = <0x00200000 0x01d00000>;
+			};
+			partition@1f00000 {
+				label = "uboot";
+				reg = <0x01f00000 0x00040000>;
+			};
+			partition@1f40000 {
+				label = "env";
+				reg = <0x01f40000 0x00040000>;
+			};
+			partition@1f80000 {
+				label = "oftree";
+				reg = <0x01f80000 0x00040000>;
+			};
+			partition@1fc0000 {
+				label = "space";
+				reg = <0x01fc0000 0x00040000>;
+			};
+		};
+
+		sram@2,0 {
+			compatible = "mtd-ram";
+			reg = <2 0 0x00200000>;
+			bank-width = <2>;
+		};
+
+		/*
+		 * example snippets for FPGA
+		 *
+		 * fpga@3,0 {
+		 *	 compatible = "fpga_driver";
+		 *	 reg = <3 0 0x02000000>;
+		 *	 bank-width = <4>;
+		 * };
+		 *
+		 * fpga@4,0 {
+		 *	 compatible = "fpga_driver";
+		 *	 reg = <4 0 0x02000000>;
+		 *	 bank-width = <4>;
+		 * };
+		 */
+
+		/*
+		 * example snippets for free chipselects
+		 *
+		 * device@5,0 {
+		 *	 compatible = "custom_driver";
+		 *	 reg = <5 0 0x02000000>;
+		 * };
+		 *
+		 * device@6,0 {
+		 *	 compatible = "custom_driver";
+		 *	 reg = <6 0 0x02000000>;
+		 * };
+		 *
+		 * device@7,0 {
+		 *	 compatible = "custom_driver";
+		 *	 reg = <7 0 0x02000000>;
+		 * };
+		 */
+	};
+};
diff --git a/src/powerpc/pdm360ng.dts b/src/powerpc/pdm360ng.dts
new file mode 100644
index 000000000000..0cec7244abe7
--- /dev/null
+++ b/src/powerpc/pdm360ng.dts
@@ -0,0 +1,199 @@
+/*
+ * Device Tree Source for IFM PDM360NG.
+ *
+ * Copyright 2009 - 2010 DENX Software Engineering.
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * Based on MPC5121E ADS dts.
+ * Copyright 2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <mpc5121.dtsi>
+
+/ {
+	model = "pdm360ng";
+	compatible = "ifm,pdm360ng", "fsl,mpc5121";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&ipic>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;	// 512MB at 0
+	};
+
+	nfc@40000000 {
+		bank-width = <0x1>;
+		chips = <0x1>;
+
+		partition@0 {
+			label = "nand0";
+			reg = <0x0 0x40000000>;
+		};
+	};
+
+	localbus@80000020 {
+		ranges = <0x0 0x0 0xf0000000 0x10000000   /* Flash */
+			  0x2 0x0 0x50040000 0x00020000>; /* CS2: MRAM */
+
+		flash@0,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			reg = <0 0x00000000 0x08000000
+			       0 0x08000000 0x08000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <4>;
+			device-width = <2>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x00000000 0x00080000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "environment";
+				reg = <0x00080000 0x00080000>;
+				read-only;
+			};
+			partition@100000 {
+				label = "splash-image";
+				reg = <0x00100000 0x00080000>;
+				read-only;
+			};
+			partition@180000 {
+				label = "device-tree";
+				reg = <0x00180000 0x00040000>;
+			};
+			partition@1c0000 {
+				label = "kernel";
+				reg = <0x001c0000 0x00500000>;
+			};
+			partition@6c0000 {
+				label = "filesystem";
+				reg = <0x006c0000 0x07940000>;
+			};
+		};
+
+		mram0@2,0 {
+			compatible = "mtd-ram";
+			reg = <2 0x00000 0x10000>;
+			bank-width = <2>;
+		};
+
+		mram1@2,10000 {
+			compatible = "mtd-ram";
+			reg = <2 0x010000 0x10000>;
+			bank-width = <2>;
+		};
+	};
+
+	soc@80000000 {
+
+		i2c@1700 {
+			fsl,preserve-clocking;
+
+			eeprom@50 {
+				compatible = "at,24c01";
+				reg = <0x50>;
+			};
+
+			rtc@68 {
+				compatible = "st,m41t00";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@1720 {
+			status = "disabled";
+		};
+
+		i2c@1740 {
+			fsl,preserve-clocking;
+		};
+
+		ethernet@2800 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@2800 {
+			phy0: ethernet-phy@1f {
+				compatible = "smsc,lan8700";
+				reg = <0x1f>;
+			};
+		};
+
+		/* USB1 using external ULPI PHY */
+		usb@3000 {
+			dr_mode = "host";
+		};
+
+		/* USB0 using internal UTMI PHY */
+		usb@4000 {
+			fsl,invert-pwr-fault;
+		};
+
+		psc@11000 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+		};
+
+		psc@11100 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+		};
+
+		psc@11200 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+		};
+
+		psc@11300 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+		};
+
+		psc@11400 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+		};
+
+		psc@11500 {
+			status = "disabled";
+		};
+
+		psc@11600 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+		};
+
+		psc@11700 {
+			status = "disabled";
+		};
+
+		psc@11800 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+		};
+
+		psc@11900 {
+			compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* ADS7845 touch screen controller */
+			ts@0 {
+				compatible = "ti,ads7846";
+				reg = <0x0>;
+				spi-max-frequency = <3000000>;
+				/* pen irq is GPIO25 */
+				interrupts = <78 0x8>;
+			};
+		};
+
+		psc@11a00 {
+			status = "disabled";
+		};
+
+		psc@11b00 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+		};
+	};
+};
diff --git a/src/powerpc/pq2fads.dts b/src/powerpc/pq2fads.dts
new file mode 100644
index 000000000000..0c525ff0c257
--- /dev/null
+++ b/src/powerpc/pq2fads.dts
@@ -0,0 +1,247 @@
+/*
+ * Device Tree for the PQ2FADS-ZU board with an MPC8280 chip.
+ *
+ * Copyright 2007,2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "pq2fads";
+	compatible = "fsl,pq2fads";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
+			timebase-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	localbus@f0010100 {
+		compatible = "fsl,mpc8280-localbus",
+		             "fsl,pq2-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xf0010100 0x60>;
+
+		ranges = <0x0 0x0 0xff800000 0x800000
+		          0x1 0x0 0xf4500000 0x8000
+		          0x8 0x0 0xf8200000 0x8000>;
+
+		flash@0,0 {
+			compatible = "jedec-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <4>;
+			device-width = <1>;
+		};
+
+		bcsr@1,0 {
+			reg = <0x1 0x0 0x20>;
+			compatible = "fsl,pq2fads-bcsr";
+		};
+
+		PCI_PIC: pic@8,0 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			reg = <0x8 0x0 0x8>;
+			compatible = "fsl,pq2ads-pci-pic";
+			interrupt-parent = <&PIC>;
+			interrupts = <24 8>;
+		};
+	};
+
+	pci0: pci@f0010800 {
+		device_type = "pci";
+		reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>;
+		compatible = "fsl,mpc8280-pci", "fsl,pq2-pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		clock-frequency = <66000000>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+		                /* IDSEL 0x16 */
+		                 0xb000 0x0 0x0 0x1 &PCI_PIC 0
+		                 0xb000 0x0 0x0 0x2 &PCI_PIC 1
+		                 0xb000 0x0 0x0 0x3 &PCI_PIC 2
+		                 0xb000 0x0 0x0 0x4 &PCI_PIC 3
+
+		                /* IDSEL 0x17 */
+		                 0xb800 0x0 0x0 0x1 &PCI_PIC 4
+		                 0xb800 0x0 0x0 0x2 &PCI_PIC 5
+		                 0xb800 0x0 0x0 0x3 &PCI_PIC 6
+		                 0xb800 0x0 0x0 0x4 &PCI_PIC 7
+
+		                /* IDSEL 0x18 */
+		                 0xc000 0x0 0x0 0x1 &PCI_PIC 8
+		                 0xc000 0x0 0x0 0x2 &PCI_PIC 9
+		                 0xc000 0x0 0x0 0x3 &PCI_PIC 10
+		                 0xc000 0x0 0x0 0x4 &PCI_PIC 11>;
+
+		interrupt-parent = <&PIC>;
+		interrupts = <18 8>;
+		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+		          0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+		          0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>;
+	};
+
+	soc@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8280", "fsl,pq2-soc";
+		ranges = <0x0 0xf0000000 0x53000>;
+
+		// Temporary -- will go away once kernel uses ranges for get_immrbase().
+		reg = <0xf0000000 0x53000>;
+
+		cpm@119c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#interrupt-cells = <2>;
+			compatible = "fsl,mpc8280-cpm", "fsl,cpm2";
+			reg = <0x119c0 0x30>;
+			ranges;
+
+			muram@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x0 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x2000 0x9800 0x800>;
+				};
+			};
+
+			brg@119f0 {
+				compatible = "fsl,mpc8280-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <0x119f0 0x10 0x115f0 0x10>;
+			};
+
+			serial0: serial@11a00 {
+				device_type = "serial";
+				compatible = "fsl,mpc8280-scc-uart",
+				             "fsl,cpm2-scc-uart";
+				reg = <0x11a00 0x20 0x8000 0x100>;
+				interrupts = <40 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x800000>;
+			};
+
+			serial1: serial@11a20 {
+				device_type = "serial";
+				compatible = "fsl,mpc8280-scc-uart",
+				             "fsl,cpm2-scc-uart";
+				reg = <0x11a20 0x20 0x8100 0x100>;
+				interrupts = <41 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <0x4a00000>;
+			};
+
+			enet0: ethernet@11320 {
+				device_type = "network";
+				compatible = "fsl,mpc8280-fcc-enet",
+				             "fsl,cpm2-fcc-enet";
+				reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
+				interrupts = <33 8>;
+				interrupt-parent = <&PIC>;
+				phy-handle = <&PHY0>;
+				linux,network-index = <0>;
+				fsl,cpm-command = <0x16200300>;
+			};
+
+			enet1: ethernet@11340 {
+				device_type = "network";
+				compatible = "fsl,mpc8280-fcc-enet",
+				             "fsl,cpm2-fcc-enet";
+				reg = <0x11340 0x20 0x8600 0x100 0x113d0 0x1>;
+				interrupts = <34 8>;
+				interrupt-parent = <&PIC>;
+				phy-handle = <&PHY1>;
+				linux,network-index = <1>;
+				fsl,cpm-command = <0x1a400300>;
+				local-mac-address = [00 e0 0c 00 79 01];
+			};
+
+			mdio@10d40 {
+				compatible = "fsl,pq2fads-mdio-bitbang",
+				             "fsl,mpc8280-mdio-bitbang",
+				             "fsl,cpm2-mdio-bitbang";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x10d40 0x14>;
+				fsl,mdio-pin = <9>;
+				fsl,mdc-pin = <10>;
+
+				PHY0: ethernet-phy@0 {
+					interrupt-parent = <&PIC>;
+					interrupts = <25 2>;
+					reg = <0x0>;
+				};
+
+				PHY1: ethernet-phy@1 {
+					interrupt-parent = <&PIC>;
+					interrupts = <25 2>;
+					reg = <0x3>;
+				};
+			};
+
+			usb@11b60 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,mpc8280-usb",
+				             "fsl,cpm2-usb";
+				reg = <0x11b60 0x18 0x8b00 0x100>;
+				interrupt-parent = <&PIC>;
+				interrupts = <11 8>;
+				fsl,cpm-command = <0x2e600000>;
+			};
+		};
+
+		PIC: interrupt-controller@10c00 {
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0x10c00 0x80>;
+			compatible = "fsl,mpc8280-pic", "fsl,cpm2-pic";
+		};
+
+	};
+
+	chosen {
+		linux,stdout-path = "/soc/cpm/serial@11a00";
+	};
+};
diff --git a/src/powerpc/ps3.dts b/src/powerpc/ps3.dts
new file mode 100644
index 000000000000..96ba5b512afe
--- /dev/null
+++ b/src/powerpc/ps3.dts
@@ -0,0 +1,70 @@
+/*
+ *  PS3 Game Console device tree.
+ *
+ *  Copyright (C) 2007 Sony Computer Entertainment Inc.
+ *  Copyright 2007 Sony Corp.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/dts-v1/;
+
+/ {
+	model = "SonyPS3";
+	compatible = "sony,ps3";
+	#size-cells = <2>;
+	#address-cells = <2>;
+
+	chosen {
+	};
+
+	/*
+	 * We'll get the size of the bootmem block from lv1 after startup,
+	 * so we'll put a null entry here.
+	 */
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x00000000>;
+	};
+
+	/*
+	 * The boot cpu is always zero for PS3.
+	 *
+	 * dtc expects a clock-frequency and timebase-frequency entries, so
+	 * we'll put a null entries here.  These will be initialized after
+	 * startup with data from lv1.
+	 *
+	 * Seems the only way currently to indicate a processor has multiple
+	 * threads is with an ibm,ppc-interrupt-server#s entry.  We'll put one
+	 * here so we can bring up both of ours.  See smp_setup_cpu_maps().
+	 */
+
+	cpus {
+		#size-cells = <0>;
+		#address-cells = <1>;
+
+		cpu@0 {
+			device_type = "cpu";
+			reg = <0x00000000>;
+			ibm,ppc-interrupt-server#s = <0x0 0x1>;
+			clock-frequency = <0>;
+			timebase-frequency = <0>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			i-cache-line-size = <128>;
+			d-cache-line-size = <128>;
+		};
+	};
+};
diff --git a/src/powerpc/rainier.dts b/src/powerpc/rainier.dts
new file mode 100644
index 000000000000..9684c80e4093
--- /dev/null
+++ b/src/powerpc/rainier.dts
@@ -0,0 +1,350 @@
+/*
+ * Device Tree Source for AMCC Rainier
+ *
+ * Based on Sequoia code
+ * Copyright (c) 2007 MontaVista Software, Inc.
+ *
+ * FIXME: Draft only!
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,rainier";
+	compatible = "amcc,rainier";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+		serial3 = &UART3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440GRx";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440grx","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440grx","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-440grx","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440grx", "ibm,sdr-440ep";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440grx", "ibm,cpr-440ep";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440grx", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440grx", "ibm,sdram-44x-ddr2denali";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		DMA0: dma {
+			compatible = "ibm,dma-440grx", "ibm,dma-4xx";
+			dcr-reg = <0x100 0x027>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440grx", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
+		};
+
+		POB0: opb {
+		  	compatible = "ibm,opb-440grx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		  	ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+			          0x80000000 0x00000001 0x80000000 0x80000000>;
+		  	interrupt-parent = <&UIC1>;
+		  	interrupts = <0x7 0x4>;
+		  	clock-frequency = <0>; /* Filled in by zImage */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440grx", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				interrupts = <0x5 0x1>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl256n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x04000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "Kernel";
+						reg = <0x00000000 0x00180000>;
+					};
+					partition@180000 {
+						label = "ramdisk";
+						reg = <0x00180000 0x00200000>;
+					};
+					partition@380000 {
+						label = "file system";
+						reg = <0x00380000 0x03aa0000>;
+					};
+					partition@3e20000 {
+						label = "kozio";
+						reg = <0x03e20000 0x00140000>;
+					};
+					partition@3f60000 {
+						label = "env";
+						reg = <0x03f60000 0x00040000>;
+					};
+					partition@3fa0000 {
+						label = "u-boot";
+						reg = <0x03fa0000 0x00060000>;
+					};
+				};
+
+			};
+
+			UART0: serial@ef600300 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600300 0x00000008>;
+		   		virtual-reg = <0xef600300>;
+		   		clock-frequency = <0>; /* Filled in by zImage */
+		   		current-speed = <115200>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0x0 0x4>;
+	   		};
+
+			UART1: serial@ef600400 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600400 0x00000008>;
+		   		virtual-reg = <0xef600400>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0x1 0x4>;
+	   		};
+
+			UART2: serial@ef600500 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600500 0x00000008>;
+		   		virtual-reg = <0xef600500>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC1>;
+		   		interrupts = <0x3 0x4>;
+	   		};
+
+			UART3: serial@ef600600 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600600 0x00000008>;
+		   		virtual-reg = <0xef600600>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC1>;
+		   		interrupts = <0x4 0x4>;
+	   		};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-440grx", "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-440grx", "ibm,iic";
+				reg = <0xef600800 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x7 0x4>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-440grx", "ibm,zmii";
+				reg = <0xef600d00 0x0000000c>;
+			};
+
+			RGMII0: emac-rgmii@ef601000 {
+				compatible = "ibm,rgmii-440grx", "ibm,rgmii";
+				reg = <0xef601000 0x00000008>;
+				has-mdio;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600e00 0x00000074>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <0>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
+				reg = <0xef600f00 0x00000074>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <1>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+		};
+
+		PCI0: pci@1ec000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb440grx-pci", "ibm,plb-pci";
+			primary;
+			reg = <0x00000001 0xeec00000 0x00000008	/* Config space access */
+			       0x00000001 0xeed00000 0x00000004	/* IACK */
+			       0x00000001 0xeed00000 0x00000004	/* Special cycle */
+			       0x00000001 0xef400000 0x00000040>;	/* Internal registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed. Chip supports a second
+			 * IO range but we don't use it for now
+			 */
+			ranges = <0x02000000 0x0 0x80000000 0x1 0x80000000 0x0 0x40000000
+				0x01000000 0x0 0x00000000 0x1 0xe8000000 0x0 0x00010000
+				0x01000000 0x0 0x00000000 0x1 0xe8800000 0x0 0x03800000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* All PCI interrupts are routed to IRQ 67 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600300";
+		bootargs = "console=ttyS0,115200";
+	};
+};
diff --git a/src/powerpc/redwood.dts b/src/powerpc/redwood.dts
new file mode 100644
index 000000000000..d86a3a498118
--- /dev/null
+++ b/src/powerpc/redwood.dts
@@ -0,0 +1,387 @@
+/*
+ * Device Tree Source for AMCC Redwood(460SX)
+ *
+ * Copyright 2008 AMCC <tmarri@amcc.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,redwood";
+	compatible = "amcc,redwood";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,460SX";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-460sx","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-460sx","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-460sx","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-460sx","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-460sx";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-460sx";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-460sx", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-460sx", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-460sx", "ibm,mcmal2";
+			dcr-reg = <0x180 0x62>;
+			num-tx-chans = <4>;
+			num-rx-chans = <32>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&UIC1>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x1 0x4
+					/*TXDE*/  0x2 0x4
+					/*RXDE*/  0x3 0x4
+					/*COAL TX0*/ 0x18 0x2
+					/*COAL TX1*/ 0x19 0x2
+					/*COAL TX2*/ 0x1a 0x2
+					/*COAL TX3*/ 0x1b 0x2
+					/*COAL RX0*/ 0x1c 0x2
+					/*COAL RX1*/ 0x1d 0x2
+					/*COAL RX2*/ 0x1e 0x2
+					/*COAL RX3*/ 0x1f 0x2>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-460sx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-460sx", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x6 0x4>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl512n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x0000000 0x00000000 0x04000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "ramdisk";
+						reg = <0x00200000 0x01400000>;
+					};
+					partition@1600000 {
+						label = "jffs2";
+						reg = <0x01600000 0x00400000>;
+					};
+					partition@1a00000 {
+						label = "user";
+						reg = <0x01a00000 0x02560000>;
+					};
+					partition@3f60000 {
+						label = "env";
+						reg = <0x03f60000 0x00040000>;
+					};
+					partition@3fa0000 {
+						label = "u-boot";
+						reg = <0x03fa0000 0x00060000>;
+					};
+				};
+			};
+
+			UART0: serial@ef600200 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600200 0x00000008>;
+				virtual-reg = <0xef600200>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			RGMII0: emac-rgmii@ef600900 {
+				compatible = "ibm,rgmii-460sx", "ibm,rgmii";
+				reg = <0xef600900 0x00000008>;
+			};
+
+			EMAC0: ethernet@ef600a00 {
+				device_type = "network";
+				compatible = "ibm,emac-460sx", "ibm,emac4";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4
+						 /*Wake*/   0x1 &UIC2 0x1d 0x4>;
+				reg = <0xef600a00 0x00000070>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+		};
+		PCIE0: pciex@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 10 to 0x1f */
+			bus-range = <0x10 0x1f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pciex@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 10 to 0x1f */
+			bus-range = <0x20 0x2f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
+		};
+
+		PCIE2: pciex@d40000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
+			primary;
+			port = <0x2>; /* port number */
+			reg = <0x0000000d 0x40000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10002000 0x00001000>;	/* Registers */
+			dcr-reg = <0x140 0x020>;
+			sdr-base = <0x370>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 10 to 0x1f */
+			bus-range = <0x30 0x3f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
+		};
+
+		MSI: ppc4xx-msi@400300000 {
+				compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
+				reg = < 0x4 0x00300000 0x100
+					0x4 0x00300000 0x100>;
+				sdr-base = <0x3B0>;
+				msi-data = <0x00000000>;
+				msi-mask = <0x44440000>;
+				interrupt-count = <3>;
+				interrupts =<0 1 2 3>;
+				interrupt-parent = <&UIC0>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = <0 &UIC0 0xC 1
+					1 &UIC0 0x0D 1
+					2 &UIC0 0x0E 1
+					3 &UIC0 0x0F 1>;
+		};
+
+	};
+
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600200";
+	};
+
+};
diff --git a/src/powerpc/sam440ep.dts b/src/powerpc/sam440ep.dts
new file mode 100644
index 000000000000..088361cf4636
--- /dev/null
+++ b/src/powerpc/sam440ep.dts
@@ -0,0 +1,293 @@
+/*
+ * Device Tree Source for ACube Sam440ep  based off bamboo.dts code 
+ * original copyrights below 
+ *
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Modified from bamboo.dts for sam440ep:
+ * Copyright 2008 Giuseppe Coviello <gicoviello@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "acube,sam440ep";
+	compatible = "acube,sam440ep";
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+		serial3 = &UART3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440EP";
+			reg = <0>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 9>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 9>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 4 0x1f 4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440ep";
+		dcr-reg = <0x00e 2>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440ep";
+		dcr-reg = <0x00c 2>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
+			dcr-reg = <0x010 2>;
+		};
+
+		DMA0: dma {
+			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
+			dcr-reg = <0x100 0x027>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0 1 2 3 4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0 &UIC0 10 4
+					/*RXEOB*/ 1 &UIC0 11 4
+					/*SERR*/  2 &UIC1 0 4
+					/*TXDE*/  3 &UIC1 1 4
+					/*RXDE*/  4 &UIC1 2 4>;
+		};
+
+		POB0: opb {
+		  	compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Bamboo is oddball in the 44x world and doesn't use the ERPN
+			 * bits.
+			 */
+		  	ranges = <0x00000000 0 0x00000000 0x80000000
+			          0x80000000 0 0x80000000 0x80000000>;
+		  	interrupt-parent = <&UIC1>;
+		  	interrupts = <7 4>;
+		  	clock-frequency = <0>; /* Filled in by zImage */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <0x012 2>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				interrupts = <5 1>;
+				interrupt-parent = <&UIC1>;
+			};
+
+			UART0: serial@ef600300 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600300 8>;
+		   		virtual-reg = <0xef600300>;
+		   		clock-frequency = <0>; /* Filled in by zImage */
+		   		current-speed = <0x1c200>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0 4>;
+	   		};
+
+			UART1: serial@ef600400 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600400 8>;
+		   		virtual-reg = <0xef600400>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <1 4>;
+	   		};
+
+			UART2: serial@ef600500 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600500 8>;
+		   		virtual-reg = <0xef600500>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <3 4>;
+	   		};
+
+			UART3: serial@ef600600 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600600 8>;
+		   		virtual-reg = <0xef600600>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <4 4>;
+	   		};
+
+			IIC0: i2c@ef600700 {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				index = <0>;
+				reg = <0xef600700 0x14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <2 4>;
+				rtc@68 {
+					compatible = "st,m41t80";
+					reg = <0x68>;
+				};
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				index = <5>;
+				reg = <0xef600800 0x14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <7 4>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
+				reg = <0xef600d00 0xc>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				linux,network-index = <0>;
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 4 0x1d 4>;
+				reg = <0xef600e00 0x70>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0 1>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+				phy-mode = "rmii";
+				phy-map = <00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <0>;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				linux,network-index = <1>;
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1e 4 0x1f 4>;
+				reg = <0xef600f00 0x70>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2 3>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+				phy-mode = "rmii";
+				phy-map = <00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <1>;
+			};
+			usb@ef601000 {
+				compatible = "ohci-be";
+				reg = <0xef601000 0x80>;
+				interrupts = <8 4 9 4>;
+				interrupt-parent = <&UIC1>;
+			};	
+		};
+
+		PCI0: pci@ec000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
+			primary;
+			reg = <0 0xeec00000 8	   /* Config space access */
+			       0 0xeed00000 4	   /* IACK */
+			       0 0xeed00000 4	   /* Special cycle */
+			       0 0xef400000 0x40>; /* Internal registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed. Chip supports a second
+			 * IO range but we don't use it for now
+			 */
+			ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000
+				  0x01000000 0 0x00000000 0 0xe8000000 0 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0 0 0 0 0 0x80000000>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600300";
+	};
+};
diff --git a/src/powerpc/sbc8349.dts b/src/powerpc/sbc8349.dts
new file mode 100644
index 000000000000..fc89e00b765c
--- /dev/null
+++ b/src/powerpc/sbc8349.dts
@@ -0,0 +1,331 @@
+/*
+ * SBC8349E Device Tree Source
+ *
+ * Copyright 2007 Wind River Inc.
+ *
+ * Paul Gortmaker (see MAINTAINERS for contact information)
+ *
+ *	-based largely on the Freescale MPC834x_MDS dts.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "SBC8349E";
+	compatible = "SBC834xE";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8349@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;	// 256MB at 0
+	};
+
+	soc8349@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		/* phy type (ULPI or SERIAL) are only types supported for MPH */
+		/* port = 0 or 1 */
+		usb@22000 {
+			compatible = "fsl-usb2-mph";
+			reg = <0x22000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <39 0x8>;
+			phy_type = "ulpi";
+			port0;
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			linux,network-index = <0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@19 {
+					interrupt-parent = <&ipic>;
+					interrupts = <20 0x8>;
+					reg = <0x19>;
+				};
+
+				phy1: ethernet-phy@1a {
+					interrupt-parent = <&ipic>;
+					interrupts = <21 0x8>;
+					reg = <0x1a>;
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			linux,network-index = <1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: pic@700 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8349-localbus", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+		ranges = <0x0 0x0 0xff800000 0x00800000		/* 8MB Flash */
+			  0x1 0x0 0xf8000000 0x00002000		/* 8KB EEPROM */
+			  0x2 0x0 0x10000000 0x04000000		/* 64MB SDRAM */
+			  0x3 0x0 0x10000000 0x04000000>;	/* 64MB SDRAM */
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "intel,28F640J3A", "cfi-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "user";
+				reg = <0x00040000 0x006c0000>;
+			};
+
+			partition@700000 {
+				label = "legacy u-boot";
+				reg = <0x00700000 0x00100000>;
+				read-only;
+			};
+
+		};
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+				/* IDSEL 0x11 */
+				 0x8800 0x0 0x0 0x1 &ipic 48 0x8
+				 0x8800 0x0 0x0 0x2 &ipic 17 0x8
+				 0x8800 0x0 0x0 0x3 &ipic 18 0x8
+				 0x8800 0x0 0x0 0x4 &ipic 19 0x8>;
+
+		interrupt-parent = <&ipic>;
+		interrupts = <0x42 0x8>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+			  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+};
diff --git a/src/powerpc/sbc8548-altflash.dts b/src/powerpc/sbc8548-altflash.dts
new file mode 100644
index 000000000000..0b38a0defd2c
--- /dev/null
+++ b/src/powerpc/sbc8548-altflash.dts
@@ -0,0 +1,115 @@
+/*
+ * SBC8548 Device Tree Source
+ *
+ * Configured for booting off the alternate (64MB SODIMM) flash.
+ * Requires switching JP12 jumpers and changing SW2.8 setting.
+ *
+ * Copyright 2013 Wind River Systems Inc.
+ *
+ * Paul Gortmaker (see MAINTAINERS for contact information)
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/dts-v1/;
+
+/include/ "sbc8548-pre.dtsi"
+
+/{
+	localbus@e0000000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		reg = <0xe0000000 0x5000>;
+		interrupt-parent = <&mpic>;
+
+		ranges = <0x0 0x0 0xfc000000 0x04000000		/*64MB Flash*/
+			  0x3 0x0 0xf0000000 0x04000000		/*64MB SDRAM*/
+			  0x4 0x0 0xf4000000 0x04000000 	/*64MB SDRAM*/
+			  0x5 0x0 0xf8000000 0x00b10000		/* EPLD */
+			  0x6 0x0 0xef800000 0x00800000>;	/*8MB Flash*/
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x0 0x0 0x04000000>;
+			compatible = "intel,JS28F128", "cfi-flash";
+			bank-width = <4>;
+			device-width = <1>;
+			partition@0x0 {
+				label = "space";
+				/* FC000000 -> FFEFFFFF */
+				reg = <0x00000000 0x03f00000>;
+			};
+			partition@0x03f00000 {
+				label = "bootloader";
+				/* FFF00000 -> FFFFFFFF */
+				reg = <0x03f00000 0x00100000>;
+				read-only;
+			};
+                };
+
+
+		epld@5,0 {
+			compatible = "wrs,epld-localbus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			reg = <0x5 0x0 0x00b10000>;
+			ranges = <
+				0x0 0x0 0x5 0x000000 0x1fff	/* LED */
+				0x1 0x0 0x5 0x100000 0x1fff	/* Switches */
+				0x3 0x0 0x5 0x300000 0x1fff	/* HW Rev. */
+				0xb 0x0	0x5 0xb00000 0x1fff	/* EEPROM */
+			>;
+
+			led@0,0 {
+				compatible = "led";
+				reg = <0x0 0x0 0x1fff>;
+			};
+
+			switches@1,0 {
+				compatible = "switches";
+				reg = <0x1 0x0 0x1fff>;
+			};
+
+			hw-rev@3,0 {
+				compatible = "hw-rev";
+				reg = <0x3 0x0 0x1fff>;
+			};
+
+			eeprom@b,0 {
+				compatible = "eeprom";
+				reg = <0xb 0 0x1fff>;
+			};
+
+		};
+
+		alt-flash@6,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "intel,JS28F640", "cfi-flash";
+			reg = <0x6 0x0 0x800000>;
+			bank-width = <1>;
+			device-width = <1>;
+			partition@0x0 {
+				label = "space";
+				/* EF800000 -> EFF9FFFF */
+				reg = <0x00000000 0x007a0000>;
+			};
+			partition@0x7a0000 {
+				label = "bootloader";
+				/* EFFA0000 -> EFFFFFFF */
+				reg = <0x007a0000 0x00060000>;
+				read-only;
+			};
+		};
+
+
+        };
+};
+
+/include/ "sbc8548-post.dtsi"
diff --git a/src/powerpc/sbc8548-post.dtsi b/src/powerpc/sbc8548-post.dtsi
new file mode 100644
index 000000000000..9b505c8e5350
--- /dev/null
+++ b/src/powerpc/sbc8548-post.dtsi
@@ -0,0 +1,293 @@
+/*
+ * SBC8548 Device Tree Source
+ *
+ * Copyright 2007 Wind River Systems Inc.
+ *
+ * Paul Gortmaker (see MAINTAINERS for contact information)
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/{
+	soc8548@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x00000000 0xe0000000 0x00100000>;
+		bus-frequency = <0>;
+		compatible = "simple-bus";
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8548-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <0x12 0x2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8548-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <0x20>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
+			interrupt-parent = <&mpic>;
+			interrupts = <0x10 0x2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <0x2b 0x2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <0x2b 0x2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@19 {
+					interrupt-parent = <&mpic>;
+					interrupts = <0x6 0x1>;
+					reg = <0x19>;
+				};
+				phy1: ethernet-phy@1a {
+					interrupt-parent = <&mpic>;
+					interrupts = <0x7 0x1>;
+					reg = <0x1a>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			interrupts = <0x2a 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			interrupts = <0x2a 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities reg
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xfe>;
+			fsl,descriptor-types-mask = <0x12b0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+	pci0: pci@e0008000 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x01 (PCI-X slot) @66MHz */
+			0x0800 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x0800 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x0800 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x0800 0x0 0x0 0x4 &mpic 0x1 0x1
+
+			/* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */
+			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <0x18 0x2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>;
+		clock-frequency = <66000000>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008000 0x1000>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+	};
+
+	pci1: pcie@e000a000 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x0 (PEX) */
+			0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x0000 0x0 0x0 0x4 &mpic 0x3 0x1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <0x1a 0x2>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>;
+		clock-frequency = <33000000>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe000a000 0x1000>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0xa0000000
+				  0x02000000 0x0 0xa0000000
+				  0x0 0x10000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00800000>;
+		};
+	};
+};
diff --git a/src/powerpc/sbc8548-pre.dtsi b/src/powerpc/sbc8548-pre.dtsi
new file mode 100644
index 000000000000..d8c66290c5b4
--- /dev/null
+++ b/src/powerpc/sbc8548-pre.dtsi
@@ -0,0 +1,52 @@
+/*
+ * SBC8548 Device Tree Source
+ *
+ * Copyright 2007 Wind River Systems Inc.
+ *
+ * Paul Gortmaker (see MAINTAINERS for contact information)
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/{
+	model = "SBC8548";
+	compatible = "SBC8548";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <0x20>;	// 32 bytes
+			i-cache-line-size = <0x20>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			timebase-frequency = <0>;	// From uboot
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+};
diff --git a/src/powerpc/sbc8548.dts b/src/powerpc/sbc8548.dts
new file mode 100644
index 000000000000..1df2a0955668
--- /dev/null
+++ b/src/powerpc/sbc8548.dts
@@ -0,0 +1,110 @@
+/*
+ * SBC8548 Device Tree Source
+ *
+ * Copyright 2007 Wind River Systems Inc.
+ *
+ * Paul Gortmaker (see MAINTAINERS for contact information)
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/dts-v1/;
+
+/include/ "sbc8548-pre.dtsi"
+
+/{
+	localbus@e0000000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		reg = <0xe0000000 0x5000>;
+		interrupt-parent = <&mpic>;
+
+		ranges = <0x0 0x0 0xff800000 0x00800000		/*8MB Flash*/
+			  0x3 0x0 0xf0000000 0x04000000		/*64MB SDRAM*/
+			  0x4 0x0 0xf4000000 0x04000000 	/*64MB SDRAM*/
+			  0x5 0x0 0xf8000000 0x00b10000		/* EPLD */
+			  0x6 0x0 0xec000000 0x04000000>;	/*64MB Flash*/
+
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "intel,JS28F640", "cfi-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <1>;
+			device-width = <1>;
+			partition@0x0 {
+				label = "space";
+				/* FF800000 -> FFF9FFFF */
+				reg = <0x00000000 0x007a0000>;
+			};
+			partition@0x7a0000 {
+				label = "bootloader";
+				/* FFFA0000 -> FFFFFFFF */
+				reg = <0x007a0000 0x00060000>;
+				read-only;
+			};
+		};
+
+		epld@5,0 {
+			compatible = "wrs,epld-localbus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			reg = <0x5 0x0 0x00b10000>;
+			ranges = <
+				0x0 0x0 0x5 0x000000 0x1fff	/* LED */
+				0x1 0x0 0x5 0x100000 0x1fff	/* Switches */
+				0x3 0x0 0x5 0x300000 0x1fff	/* HW Rev. */
+				0xb 0x0	0x5 0xb00000 0x1fff	/* EEPROM */
+			>;
+
+			led@0,0 {
+				compatible = "led";
+				reg = <0x0 0x0 0x1fff>;
+			};
+
+			switches@1,0 {
+				compatible = "switches";
+				reg = <0x1 0x0 0x1fff>;
+			};
+
+			hw-rev@3,0 {
+				compatible = "hw-rev";
+				reg = <0x3 0x0 0x1fff>;
+			};
+
+			eeprom@b,0 {
+				compatible = "eeprom";
+				reg = <0xb 0 0x1fff>;
+			};
+
+		};
+
+		alt-flash@6,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x6 0x0 0x04000000>;
+			compatible = "intel,JS28F128", "cfi-flash";
+			bank-width = <4>;
+			device-width = <1>;
+			partition@0x0 {
+				label = "space";
+				/* EC000000 -> EFEFFFFF */
+				reg = <0x00000000 0x03f00000>;
+			};
+			partition@0x03f00000 {
+				label = "bootloader";
+				/* EFF00000 -> EFFFFFFF */
+				reg = <0x03f00000 0x00100000>;
+				read-only;
+			};
+                };
+        };
+};
+
+/include/ "sbc8548-post.dtsi"
diff --git a/src/powerpc/sequoia.dts b/src/powerpc/sequoia.dts
new file mode 100644
index 000000000000..b1d329246b08
--- /dev/null
+++ b/src/powerpc/sequoia.dts
@@ -0,0 +1,412 @@
+/*
+ * Device Tree Source for AMCC Sequoia
+ *
+ * Based on Bamboo code by Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ * Copyright (c) 2006, 2007 IBM Corp.
+ *
+ * FIXME: Draft only!
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,sequoia";
+	compatible = "amcc,sequoia";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+		serial3 = &UART3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440EPx";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440epx","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440epx","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-440epx","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440epx", "ibm,sdr-440ep";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440epx", "ibm,cpr-440ep";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440epx", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440epx", "ibm,sdram-44x-ddr2denali";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		CRYPTO: crypto@e0100000 {
+			compatible = "amcc,ppc440epx-crypto","amcc,ppc4xx-crypto";
+			reg = <0 0xE0100000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x17 0x4>;
+		};
+
+		rng@e0120000 {
+			compatible = "amcc,ppc440epx-rng","amcc,ppc4xx-rng";
+			reg = <0 0xE0120000 0x150>;
+		};
+
+		DMA0: dma {
+			compatible = "ibm,dma-440epx", "ibm,dma-4xx";
+			dcr-reg = <0x100 0x027>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440epx", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
+		};
+
+		USB1: usb@e0000400 {
+			compatible = "ibm,usb-ohci-440epx", "ohci-be";
+			reg = <0x00000000 0xe0000400 0x00000060>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x15 0x8>;
+		};
+
+		USB0: ehci@e0000300 {
+			compatible = "ibm,usb-ehci-440epx", "usb-ehci";
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x1a 0x4>;
+			reg = <0x00000000 0xe0000300 0x00000090 0x00000000 0xe0000390 0x00000070>;
+			big-endian;
+		};
+
+		POB0: opb {
+		  	compatible = "ibm,opb-440epx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		  	ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+			          0x80000000 0x00000001 0x80000000 0x80000000>;
+		  	interrupt-parent = <&UIC1>;
+		  	interrupts = <0x7 0x4>;
+		  	clock-frequency = <0>; /* Filled in by zImage */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440epx", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				interrupts = <0x5 0x1>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl256n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x04000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "Kernel";
+						reg = <0x00000000 0x00180000>;
+					};
+					partition@180000 {
+						label = "ramdisk";
+						reg = <0x00180000 0x00200000>;
+					};
+					partition@380000 {
+						label = "file system";
+						reg = <0x00380000 0x03aa0000>;
+					};
+					partition@3e20000 {
+						label = "kozio";
+						reg = <0x03e20000 0x00140000>;
+					};
+					partition@3f60000 {
+						label = "env";
+						reg = <0x03f60000 0x00040000>;
+					};
+					partition@3fa0000 {
+						label = "u-boot";
+						reg = <0x03fa0000 0x00060000>;
+					};
+				};
+
+				ndfc@3,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000003 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x00084000>;
+						};
+						partition@84000 {
+							label = "user";
+							reg = <0x00000000 0x01f7c000>;
+						};
+					};
+				};
+			};
+
+			UART0: serial@ef600300 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600300 0x00000008>;
+		   		virtual-reg = <0xef600300>;
+		   		clock-frequency = <0>; /* Filled in by zImage */
+		   		current-speed = <115200>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0x0 0x4>;
+	   		};
+
+			UART1: serial@ef600400 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600400 0x00000008>;
+		   		virtual-reg = <0xef600400>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0x1 0x4>;
+	   		};
+
+			UART2: serial@ef600500 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600500 0x00000008>;
+		   		virtual-reg = <0xef600500>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC1>;
+		   		interrupts = <0x3 0x4>;
+	   		};
+
+			UART3: serial@ef600600 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600600 0x00000008>;
+		   		virtual-reg = <0xef600600>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC1>;
+		   		interrupts = <0x4 0x4>;
+	   		};
+
+			IIC0: i2c@ef600700 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "ibm,iic-440epx", "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+
+				hwmon@48 {
+					compatible = "adi,ad7414";
+					reg = <0x48>;
+				};
+			};
+
+			IIC1: i2c@ef600800 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "ibm,iic-440epx", "ibm,iic";
+				reg = <0xef600800 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x7 0x4>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-440epx", "ibm,zmii";
+				reg = <0xef600d00 0x0000000c>;
+			};
+
+			RGMII0: emac-rgmii@ef601000 {
+				compatible = "ibm,rgmii-440epx", "ibm,rgmii";
+				reg = <0xef601000 0x00000008>;
+				has-mdio;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-440epx", "ibm,emac4";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600e00 0x00000074>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <0>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-440epx", "ibm,emac4";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
+				reg = <0xef600f00 0x00000074>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <1>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+		};
+
+		PCI0: pci@1ec000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb440epx-pci", "ibm,plb-pci";
+			primary;
+			reg = <0x00000001 0xeec00000 0x00000008	/* Config space access */
+			       0x00000001 0xeed00000 0x00000004	/* IACK */
+			       0x00000001 0xeed00000 0x00000004	/* Special cycle */
+			       0x00000001 0xef400000 0x00000040>;	/* Internal registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed. Chip supports a second
+			 * IO range but we don't use it for now
+			 * From the 440EPx user manual:
+			 * PCI 1 Memory     1 8000 0000     1 BFFF FFFF     1GB
+			 * I/O              1 E800 0000     1 E800 FFFF     64KB
+			 * I/O              1 E880 0000     1 EBFF FFFF     56MB
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000001 0x80000000 0x00000000 0x40000000
+				0x01000000 0x00000000 0x00000000 0x00000001 0xe8000000 0x00000000 0x00010000
+				0x01000000 0x00000000 0x00000000 0x00000001 0xe8800000 0x00000000 0x03800000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* All PCI interrupts are routed to IRQ 67 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600300";
+		bootargs = "console=ttyS0,115200";
+	};
+};
diff --git a/src/powerpc/socrates.dts b/src/powerpc/socrates.dts
new file mode 100644
index 000000000000..134a5ff917e1
--- /dev/null
+++ b/src/powerpc/socrates.dts
@@ -0,0 +1,352 @@
+/*
+ * Device Tree Source for the Socrates board (MPC8544).
+ *
+ * Copyright (c) 2008 Emcraft Systems.
+ * Sergei Poselenov, <sposelenov@emcraft.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "abb,socrates";
+	compatible = "abb,socrates";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8544@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
+	};
+
+	soc8544@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+
+		ranges = <0x00000000 0xe0000000 0x00100000>;
+		bus-frequency = <0>;		// Filled in by U-Boot
+		compatible = "fsl,mpc8544-immr", "simple-bus";
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8544-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8544-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8544-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;
+			cache-size = <0x40000>;	// L2, 256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl,mpc8544-i2c", "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			fsl,preserve-clocking;
+
+			dtt@28 {
+				compatible = "winbond,w83782d";
+				reg = <0x28>;
+			};
+			rtc@32 {
+				compatible = "epson,rx8025";
+				reg = <0x32>;
+				interrupts = <7 1>;
+				interrupt-parent = <&mpic>;
+			};
+			dtt@4c {
+				compatible = "dallas,ds75";
+				reg = <0x4c>;
+			};
+			ts@4a {
+				compatible = "ti,tsc2003";
+				reg = <0x4a>;
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl,mpc8544-i2c", "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			fsl,preserve-clocking;
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
+			tbi-handle = <&tbi0>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@0 {
+					interrupt-parent = <&mpic>;
+					interrupts = <0 1>;
+					reg = <0>;
+				};
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <0 1>;
+					reg = <1>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+				};
+			};
+		};
+
+		enet1: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+			tbi-handle = <&tbi1>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+
+	localbus {
+		compatible = "fsl,mpc8544-localbus",
+		             "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xe0005000 0x40>;
+		interrupt-parent = <&mpic>;
+		interrupts = <19 2>;
+
+		ranges = <0 0 0xfc000000 0x04000000
+			  2 0 0xc8000000 0x04000000
+			  3 0 0xc0000000 0x00100000
+			>; /* Overwritten by U-Boot */
+
+		nor_flash@0,0 {
+			compatible = "amd,s29gl256n", "cfi-flash";
+			bank-width = <2>;
+			reg = <0x0 0x000000 0x4000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "kernel";
+				reg = <0x0 0x1e0000>;
+				read-only;
+			};
+			partition@1e0000 {
+				label = "dtb";
+				reg = <0x1e0000 0x20000>;
+			};
+			partition@200000 {
+				label = "root";
+				reg = <0x200000 0x200000>;
+			};
+			partition@400000 {
+				label = "user";
+				reg = <0x400000 0x3b80000>;
+			};
+			partition@3f80000 {
+				label = "env";
+				reg = <0x3f80000 0x40000>;
+				read-only;
+			};
+			partition@3fc0000 {
+				label = "u-boot";
+				reg = <0x3fc0000 0x40000>;
+				read-only;
+			};
+		};
+
+		display@2,0 {
+			compatible = "fujitsu,lime";
+			reg = <2 0x0 0x4000000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <6 1>;
+		};
+
+		fpga_pic: fpga-pic@3,10 {
+			compatible = "abb,socrates-fpga-pic";
+			reg = <3 0x10 0x10>;
+			interrupt-controller;
+			/* IRQs 2, 10, 11, active low, level-sensitive */
+			interrupts = <2 1 10 1 11 1>;
+			interrupt-parent = <&mpic>;
+			#interrupt-cells = <3>;
+		};
+
+		spi@3,60 {
+			compatible = "abb,socrates-spi";
+			reg = <3 0x60 0x10>;
+			interrupts = <8 4 0>;	// number, type, routing
+			interrupt-parent = <&fpga_pic>;
+		};
+
+		nand@3,70 {
+			compatible = "abb,socrates-nand";
+			reg = <3 0x70 0x04>;
+			bank-width = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			data@0 {
+				label = "data";
+				reg = <0x0 0x40000000>;
+			};
+		};
+
+		can@3,100 {
+			compatible = "philips,sja1000";
+			reg = <3 0x100 0x80>;
+			interrupts = <2 8 1>;	// number, type, routing
+			interrupt-parent = <&fpga_pic>;
+		};
+	};
+
+	pci0: pci@e0008000 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xe0008000 0x1000>;
+		clock-frequency = <66666666>;
+
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 0x11 */
+				 0x8800 0x0 0x0 1 &mpic 5 1
+				/* IDSEL 0x12 */
+				 0x9000 0x0 0x0 1 &mpic 4 1>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0x0 0x0>;
+		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x01000000>;
+	};
+
+};
diff --git a/src/powerpc/storcenter.dts b/src/powerpc/storcenter.dts
new file mode 100644
index 000000000000..2a555738517e
--- /dev/null
+++ b/src/powerpc/storcenter.dts
@@ -0,0 +1,142 @@
+/*
+ * Device Tree Source for IOMEGA StorCenter
+ *
+ * Copyright 2007 Oyvind Repvik
+ * Copyright 2007 Jon Loeliger
+ *
+ * Based on the Kurobox DTS by G. Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "StorCenter";
+	compatible = "iomega,storcenter";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8241@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <200000000>;
+			timebase-frequency = <25000000>;
+			bus-frequency = <0>;	/* from bootwrapper */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>;
+			d-cache-size = <16384>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;	/* 64MB @ 0x0 */
+	};
+
+	soc@fc000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8241", "mpc10x";
+		store-gathering = <0>; /* 0 == off, !0 == on */
+		ranges = <0x0 0xfc000000 0x100000>;
+		reg = <0xfc000000 0x100000>;	/* EUMB */
+		bus-frequency = <0>;		/* fixed by loader */
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x20>;
+			clock-frequency = <97553800>; /* Hz */
+			current-speed = <115200>;
+			interrupts = <25 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x20>;
+			clock-frequency = <97553800>; /* Hz */
+			current-speed = <9600>;
+			interrupts = <26 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		mpic: interrupt-controller@40000 {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			device_type = "open-pic";
+			compatible = "chrp,open-pic";
+			interrupt-controller;
+			reg = <0x40000 0x40000>;
+		};
+
+	};
+
+	pci0: pci@fe800000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "mpc10x-pci";
+		reg = <0xfe800000 0x1000>;
+		ranges = <0x01000000 0x0        0x0 0xfe000000 0x0 0x00c00000
+			  0x02000000 0x0 0x80000000 0x80000000 0x0 0x70000000>;
+		bus-range = <0 0xff>;
+		clock-frequency = <97553800>;
+		interrupt-parent = <&mpic>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 13 - IDE */
+			0x6800 0 0 1 &mpic 0 1
+			0x6800 0 0 2 &mpic 0 1
+			0x6800 0 0 3 &mpic 0 1
+			0x6800 0 0 4 &mpic 0 1
+			/* IDSEL 14 - USB */
+			0x7000 0 0 1 &mpic 0 1
+			0x7000 0 0 2 &mpic 0 1
+			0x7000 0 0 3 &mpic 0 1
+			0x7000 0 0 4 &mpic 0 1
+			/* IDSEL 15 - ETH */
+			0x7800 0 0 1 &mpic 0 1
+			0x7800 0 0 2 &mpic 0 1
+			0x7800 0 0 3 &mpic 0 1
+			0x7800 0 0 4 &mpic 0 1
+		>;
+	};
+
+	chosen {
+		linux,stdout-path = &serial0;
+	};
+};
diff --git a/src/powerpc/stx_gp3_8560.dts b/src/powerpc/stx_gp3_8560.dts
new file mode 100644
index 000000000000..78a72ee48205
--- /dev/null
+++ b/src/powerpc/stx_gp3_8560.dts
@@ -0,0 +1,304 @@
+/*
+ * STX GP3 - 8560 ADS Device Tree Source
+ *
+ * Copyright 2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "stx,gp3";
+	compatible = "stx,gp3-8560", "stx,gp3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8560@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	soc@fdf00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0 0xfdf00000 0x100000>;
+		bus-frequency = <0>;
+		compatible = "fsl,mpc8560-immr", "simple-bus";
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8540-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8540-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;
+			cache-size = <0x40000>;	// L2, 256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 4>;
+					reg = <2>;
+				};
+				phy4: ethernet-phy@4 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 4>;
+					reg = <4>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy4>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		cpm@919c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-cpm", "fsl,cpm2", "simple-bus";
+			reg = <0x919c0 0x30>;
+			ranges;
+
+			muram@80000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x80000 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0 0x4000 0x9000 0x2000>;
+				};
+			};
+
+			brg@919f0 {
+				compatible = "fsl,mpc8560-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <0x919f0 0x10 0x915f0 0x10>;
+				clock-frequency = <0>;
+			};
+
+			cpmpic: pic@90c00 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupts = <46 2>;
+				interrupt-parent = <&mpic>;
+				reg = <0x90c00 0x80>;
+				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
+			};
+
+			serial0: serial@91a20 {
+				device_type = "serial";
+				compatible = "fsl,mpc8560-scc-uart",
+				             "fsl,cpm2-scc-uart";
+				reg = <0x91a20 0x20 0x88100 0x100>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <0x4a00000>;
+				interrupts = <41 8>;
+				interrupt-parent = <&cpmpic>;
+			};
+		};
+	};
+
+	pci0: pci@fdf08000 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x0c */
+			0x6000 0 0 1 &mpic 1 1
+			0x6000 0 0 2 &mpic 2 1
+			0x6000 0 0 3 &mpic 3 1
+			0x6000 0 0 4 &mpic 4 1
+
+			/* IDSEL 0x0d */
+			0x6800 0 0 1 &mpic 4 1
+			0x6800 0 0 2 &mpic 1 1
+			0x6800 0 0 3 &mpic 2 1
+			0x6800 0 0 4 &mpic 3 1
+
+			/* IDSEL 0x0e */
+			0x7000 0 0 1 &mpic 3 1
+			0x7000 0 0 2 &mpic 4 1
+			0x7000 0 0 3 &mpic 1 1
+			0x7000 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x0f */
+			0x7800 0 0 1 &mpic 2 1
+			0x7800 0 0 2 &mpic 3 1
+			0x7800 0 0 3 &mpic 4 1
+			0x7800 0 0 4 &mpic 1 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xe2000000 0 0x00100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xfdf08000 0x1000>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+	};
+};
diff --git a/src/powerpc/stxssa8555.dts b/src/powerpc/stxssa8555.dts
new file mode 100644
index 000000000000..859f854ba538
--- /dev/null
+++ b/src/powerpc/stxssa8555.dts
@@ -0,0 +1,378 @@
+/*
+ * MPC8555-based STx GP3 Device Tree Source
+ *
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
+ *
+ * Copyright 2010 Silicon Turnkey Express LLC.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "stx,gp3";
+        compatible = "stx,gp3-8560", "stx,gp3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8555@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;	//  33 MHz, from uboot
+			bus-frequency = <0>;	// 166 MHz
+			clock-frequency = <0>;	// 825 MHz, from uboot
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	soc8555@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x100000>;
+		bus-frequency = <0>;
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8555-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8555-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8555-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>;	// L2, 256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x2>;
+				};
+				phy1: ethernet-phy@4 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x4>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		cpm@919c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-cpm", "fsl,cpm2";
+			reg = <0x919c0 0x30>;
+			ranges;
+
+			muram@80000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x80000 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x2000 0x9000 0x1000>;
+				};
+			};
+
+			brg@919f0 {
+				compatible = "fsl,mpc8555-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <0x919f0 0x10 0x915f0 0x10>;
+			};
+
+			cpmpic: pic@90c00 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupts = <46 2>;
+				interrupt-parent = <&mpic>;
+				reg = <0x90c00 0x80>;
+				compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic";
+			};
+		};
+	};
+
+	pci0: pci@e0008000 {
+		interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x10 */
+			0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
+
+			/* IDSEL 0x11 */
+			0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
+
+			/* IDSEL 0x12 (Slot 1) */
+			0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
+
+			/* IDSEL 0x13 (Slot 2) */
+			0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
+			0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
+			0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
+			0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
+
+			/* IDSEL 0x14 (Slot 3) */
+			0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
+			0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
+			0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
+			0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
+
+			/* IDSEL 0x15 (Slot 4) */
+			0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
+
+			/* Bus 1 (Tundra Bridge) */
+			/* IDSEL 0x12 (ISA bridge) */
+			0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008000 0x1000>;
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+
+		i8259@19000 {
+			interrupt-controller;
+			device_type = "interrupt-controller";
+			reg = <0x19000 0x0 0x0 0x0 0x1>;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			compatible = "chrp,iic";
+			interrupts = <1>;
+			interrupt-parent = <&pci0>;
+		};
+	};
+
+	pci1: pci@e0009000 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x15 */
+			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		bus-range = <0 0>;
+		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0009000 0x1000>;
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+	};
+};
diff --git a/src/powerpc/taishan.dts b/src/powerpc/taishan.dts
new file mode 100644
index 000000000000..1657ad0bf8a6
--- /dev/null
+++ b/src/powerpc/taishan.dts
@@ -0,0 +1,427 @@
+/*
+ * Device Tree Source for IBM/AMCC Taishan
+ *
+ * Copyright 2007 IBM Corp.
+ * Hugh Blemings <hugh@au.ibm.com> based off code by
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,taishan";
+	compatible = "amcc,taishan";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC2;
+		ethernet1 = &EMAC3;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440GX";
+			reg = <0x00000000>;
+			clock-frequency = <800000000>; // 800MHz
+			timebase-frequency = <0>; // Filled in by zImage
+			i-cache-line-size = <50>;
+			d-cache-line-size = <50>;
+			i-cache-size = <32768>; /* 32 kB */
+			d-cache-size = <32768>; /* 32 kB */
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
+	};
+
+
+	UICB0: interrupt-controller-base {
+		compatible = "ibm,uic-440gx", "ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x200 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440gx", "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1 0x4 0x0 0x4>; /* cascade - first non-critical */
+		interrupt-parent = <&UICB0>;
+
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440gx", "ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x3 0x4 0x2 0x4>; /* cascade */
+		interrupt-parent = <&UICB0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-440gx", "ibm,uic";
+		interrupt-controller;
+		cell-index = <2>; /* was 1 */
+		dcr-reg = <0x210 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x5 0x4 0x4 0x4>; /* cascade */
+		interrupt-parent = <&UICB0>;
+	};
+
+
+	CPC0: cpc {
+		compatible = "ibm,cpc-440gp";
+		dcr-reg = <0x0b0 0x003 0x0e0 0x010>;
+		// FIXME: anything else?
+	};
+
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-440gx", "ibm,l2-cache";
+		dcr-reg = <0x020 0x008			/* Internal SRAM DCR's */
+			   0x030 0x008>;		/* L2 cache DCR's */
+		cache-line-size = <32>;		/* 32 bytes */
+		cache-size = <262144>;		/* L2, 256K */
+		interrupt-parent = <&UIC2>;
+		interrupts = <0x17 0x1>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440gx", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <160000000>; // 160MHz
+
+		SDRAM0: memory-controller {
+			compatible = "ibm,sdram-440gp";
+			dcr-reg = <0x010 0x002>;
+			// FIXME: anything else?
+		};
+
+		SRAM0: sram {
+			compatible = "ibm,sram-440gp";
+			dcr-reg = <0x020 0x008 0x00a 0x001>;
+		};
+
+		DMA0: dma {
+			// FIXME: ???
+			compatible = "ibm,dma-440gp";
+			dcr-reg = <0x100 0x027>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440gx", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <4>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					 /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					 /*SERR*/  0x2 &UIC1 0x0 0x4
+					 /*TXDE*/  0x3 &UIC1 0x1 0x4
+					 /*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-440gx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Wish there was a nicer way of specifying a full 32-bit
+			   range */
+			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+				  0x80000000 0x00000001 0x80000000 0x80000000>;
+			dcr-reg = <0x090 0x00b>;
+			interrupt-parent = <&UIC1>;
+			interrupts = <0x7 0x4>;
+			clock-frequency = <80000000>; // 80MHz
+
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440gx", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <80000000>; // 80MHz
+
+				/* ranges property is supplied by zImage
+				 * based on firmware's configuration of the
+				 * EBC bridge */
+
+				interrupts = <0x5 0x4>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "cfi-flash";
+					bank-width = <4>;
+					device-width = <2>;
+					reg = <0x0 0x0 0x4000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x0 0x180000>;
+					};
+					partition@180000 {
+						label = "root";
+						reg = <0x180000 0x200000>;
+					};
+					partition@380000 {
+						label = "user";
+						reg = <0x380000 0x3bc0000>;
+					};
+					partition@3f40000 {
+						label = "env";
+						reg = <0x3f40000 0x80000>;
+					};
+					partition@3fc0000 {
+						label = "u-boot";
+						reg = <0x3fc0000 0x40000>;
+					};
+				};
+			};
+
+
+
+			UART0: serial@40000200 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0x40000200 0x00000008>;
+				virtual-reg = <0xe0000200>;
+ 				clock-frequency = <11059200>;
+				current-speed = <115200>; /* 115200 */
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			UART1: serial@40000300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0x40000300 0x00000008>;
+				virtual-reg = <0xe0000300>;
+				clock-frequency = <11059200>;
+				current-speed = <115200>; /* 115200 */
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@40000400 {
+				/* FIXME */
+				compatible = "ibm,iic-440gp", "ibm,iic";
+				reg = <0x40000400 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+			IIC1: i2c@40000500 {
+				/* FIXME */
+				compatible = "ibm,iic-440gp", "ibm,iic";
+				reg = <0x40000500 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+			};
+
+			GPIO0: gpio@40000700 {
+				/* FIXME */
+				compatible = "ibm,gpio-440gp";
+				reg = <0x40000700 0x00000020>;
+			};
+
+			ZMII0: emac-zmii@40000780 {
+				compatible = "ibm,zmii-440gx", "ibm,zmii";
+				reg = <0x40000780 0x0000000c>;
+			};
+
+			RGMII0: emac-rgmii@40000790 {
+				compatible = "ibm,rgmii";
+				reg = <0x40000790 0x00000008>;
+			};
+
+			TAH0: emac-tah@40000b50 {
+				compatible = "ibm,tah-440gx", "ibm,tah";
+				reg = <0x40000b50 0x00000030>;
+			};
+
+			TAH1: emac-tah@40000d50 {
+				compatible = "ibm,tah-440gx", "ibm,tah";
+				reg = <0x40000d50 0x00000030>;
+			};
+
+			EMAC0: ethernet@40000800 {
+				unused = <0x1>;
+				device_type = "network";
+				compatible = "ibm,emac-440gx", "ibm,emac4";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0x40000800 0x00000074>;
+				local-mac-address = [000000000000]; // Filled in by zImage
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rmii";
+				phy-map = <0x00000001>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <0>;
+			};
+		 	EMAC1: ethernet@40000900 {
+				unused = <0x1>;
+				device_type = "network";
+				compatible = "ibm,emac-440gx", "ibm,emac4";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0x40000900 0x00000074>;
+				local-mac-address = [000000000000]; // Filled in by zImage
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rmii";
+				phy-map = <0x00000001>;
+ 				zmii-device = <&ZMII0>;
+				zmii-channel = <1>;
+			};
+
+		 	EMAC2: ethernet@40000c00 {
+				device_type = "network";
+				compatible = "ibm,emac-440gx", "ibm,emac4";
+				interrupt-parent = <&UIC2>;
+				interrupts = <0x0 0x4 0x1 0x4>;
+				reg = <0x40000c00 0x00000074>;
+				local-mac-address = [000000000000]; // Filled in by zImage
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2>;
+				mal-rx-channel = <2>;
+				cell-index = <2>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-address = <1>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+ 				zmii-device = <&ZMII0>;
+				zmii-channel = <2>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+			};
+
+		 	EMAC3: ethernet@40000e00 {
+				device_type = "network";
+				compatible = "ibm,emac-440gx", "ibm,emac4";
+				interrupt-parent = <&UIC2>;
+				interrupts = <0x2 0x4 0x3 0x4>;
+				reg = <0x40000e00 0x00000074>;
+				local-mac-address = [000000000000]; // Filled in by zImage
+				mal-device = <&MAL0>;
+				mal-tx-channel = <3>;
+				mal-rx-channel = <3>;
+				cell-index = <3>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-address = <3>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+ 				zmii-device = <&ZMII0>;
+				zmii-channel = <3>;
+				tah-device = <&TAH1>;
+				tah-channel = <0>;
+			};
+
+
+			GPT0: gpt@40000a00 {
+				/* FIXME */
+				reg = <0x40000a00 0x000000d4>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>;
+			};
+
+		};
+
+		PCIX0: pci@20ec00000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix";
+			primary;
+			large-inbound-windows;
+			enable-msi-hole;
+			reg = <0x00000002 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x00000002 0x0ed00000   0x00000004   /* Special cycles */
+			       0x00000002 0x0ec80000 0x00000100	/* Internal registers */
+			       0x00000002 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+				/* IDSEL 1 */
+				0x800 0x0 0x0 0x1 &UIC0 0x17 0x8
+				0x800 0x0 0x0 0x2 &UIC0 0x18 0x8
+				0x800 0x0 0x0 0x3 &UIC0 0x19 0x8
+				0x800 0x0 0x0 0x4 &UIC0 0x1a 0x8
+
+				/* IDSEL 2 */
+				0x1000 0x0 0x0 0x1 &UIC0 0x18 0x8
+				0x1000 0x0 0x0 0x2 &UIC0 0x19 0x8
+				0x1000 0x0 0x0 0x3 &UIC0 0x1a 0x8
+				0x1000 0x0 0x0 0x4 &UIC0 0x17 0x8
+			>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@40000300";
+	};
+};
diff --git a/src/powerpc/tqm5200.dts b/src/powerpc/tqm5200.dts
new file mode 100644
index 000000000000..1db07f6cf133
--- /dev/null
+++ b/src/powerpc/tqm5200.dts
@@ -0,0 +1,211 @@
+/*
+ * TQM5200 board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "tqc,tqm5200";
+	compatible = "tqc,tqm5200";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;	// 64MB
+	};
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>;		// from bootloader
+		system-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+		};
+
+		timer@600 {	// General Purpose Timer
+			compatible = "fsl,mpc5200-gpt";
+			reg = <0x600 0x10>;
+			interrupts = <1 9 0>;
+			fsl,has-wdt;
+		};
+
+		can@900 {
+			compatible = "fsl,mpc5200-mscan";
+			interrupts = <2 17 0>;
+			reg = <0x900 0x80>;
+		};
+
+		can@980 {
+			compatible = "fsl,mpc5200-mscan";
+			interrupts = <2 18 0>;
+			reg = <0x980 0x80>;
+		};
+
+		gpio_simple: gpio@b00 {
+			compatible = "fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		usb@1000 {
+			compatible = "fsl,mpc5200-ohci","ohci-be";
+			reg = <0x1000 0xff>;
+			interrupts = <2 6 0>;
+		};
+
+		dma-controller@1200 {
+			compatible = "fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		serial@2000 {		// PSC1
+			compatible = "fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		serial@2200 {		// PSC2
+			compatible = "fsl,mpc5200-psc-uart";
+			reg = <0x2200 0x100>;
+			interrupts = <2 2 0>;
+		};
+
+		serial@2400 {		// PSC3
+			compatible = "fsl,mpc5200-psc-uart";
+			reg = <0x2400 0x100>;
+			interrupts = <2 3 0>;
+		};
+
+		ethernet@3000 {
+			compatible = "fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+
+			 rtc@68 {
+				compatible = "dallas,ds1307";
+				reg = <0x68>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xfc000000 0x02000000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
+	};
+
+	pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
+				 0xc000 0 0 2 &mpc5200_pic 0 0 3
+				 0xc000 0 0 3 &mpc5200_pic 0 0 3
+				 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+	};
+};
diff --git a/src/powerpc/tqm8540.dts b/src/powerpc/tqm8540.dts
new file mode 100644
index 000000000000..91cbd7acd276
--- /dev/null
+++ b/src/powerpc/tqm8540.dts
@@ -0,0 +1,346 @@
+/*
+ * TQM 8540 Device Tree Source
+ *
+ * Copyright 2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "tqc,tqm8540";
+	compatible = "tqc,tqm8540";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8540@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	soc@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xe0000000 0x100000>;
+		bus-frequency = <0>;
+		compatible = "fsl,mpc8540-immr", "simple-bus";
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8540-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8540-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8540-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;
+			cache-size = <0x40000>;	// L2, 256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			dtt@48 {
+				compatible = "national,lm75";
+				reg = <0x48>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy2>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <1>;
+				};
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <3>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "FEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <41 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy3>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			device_type = "open-pic";
+			compatible = "chrp,open-pic";
+		};
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8540-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupt-parent = <&mpic>;
+		interrupts = <19 2>;
+
+		ranges = <0x0 0x0 0xfe000000 0x02000000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x02000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00180000>;
+			};
+			partition@180000 {
+				label = "root";
+				reg = <0x00180000 0x01dc0000>;
+			};
+			partition@1f40000 {
+				label = "env1";
+				reg = <0x01f40000 0x00040000>;
+			};
+			partition@1f80000 {
+				label = "env2";
+				reg = <0x01f80000 0x00040000>;
+			};
+			partition@1fc0000 {
+				label = "u-boot";
+				reg = <0x01fc0000 0x00040000>;
+				read-only;
+			};
+		};
+	};
+
+	pci0: pci@e0008000 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xe0008000 0x1000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 28 */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
+	};
+};
diff --git a/src/powerpc/tqm8541.dts b/src/powerpc/tqm8541.dts
new file mode 100644
index 000000000000..84dce2d5fc48
--- /dev/null
+++ b/src/powerpc/tqm8541.dts
@@ -0,0 +1,326 @@
+/*
+ * TQM 8541 Device Tree Source
+ *
+ * Copyright 2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "tqc,tqm8541";
+	compatible = "tqc,tqm8541";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8541@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	soc@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xe0000000 0x100000>;
+		bus-frequency = <0>;
+		compatible = "fsl,mpc8541-immr", "simple-bus";
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8541-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8540-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8540-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;
+			cache-size = <0x40000>;	// L2, 256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			dtt@48 {
+				compatible = "national,lm75";
+				reg = <0x48>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <1>;
+				};
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <3>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			device_type = "open-pic";
+			compatible = "chrp,open-pic";
+		};
+
+		cpm@919c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8541-cpm", "fsl,cpm2", "simple-bus";
+			reg = <0x919c0 0x30>;
+			ranges;
+
+			muram@80000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x80000 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0 0x2000 0x9000 0x1000>;
+				};
+			};
+
+			brg@919f0 {
+				compatible = "fsl,mpc8541-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <0x919f0 0x10 0x915f0 0x10>;
+				clock-frequency = <0>;
+			};
+
+			cpmpic: pic@90c00 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupts = <46 2>;
+				interrupt-parent = <&mpic>;
+				reg = <0x90c00 0x80>;
+				compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic";
+			};
+		};
+	};
+
+	pci0: pci@e0008000 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xe0008000 0x1000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 28 */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
+	};
+};
diff --git a/src/powerpc/tqm8548-bigflash.dts b/src/powerpc/tqm8548-bigflash.dts
new file mode 100644
index 000000000000..7a333dd02d9c
--- /dev/null
+++ b/src/powerpc/tqm8548-bigflash.dts
@@ -0,0 +1,499 @@
+/*
+ * TQM8548 Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2008 Wolfgang Grandegger <wg@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "tqc,tqm8548";
+	compatible = "tqc,tqm8548";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
+	};
+
+	soc@a0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xa0000000 0x100000>;
+		bus-frequency = <0>;
+		compatible = "fsl,mpc8548-immr", "simple-bus";
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8548-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8548-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			dtt@48 {
+				compatible = "national,lm75";
+				reg = <0x48>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy1: ethernet-phy@0 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <1>;
+				};
+				phy2: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <3>;
+				};
+				phy4: ethernet-phy@4 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <4>;
+				};
+				phy5: ethernet-phy@5 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <5>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy4>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet3: ethernet@27000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <3>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			ranges = <0x0 0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi3>;
+			phy-handle = <&phy5>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi3: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	// global utilities reg
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+	localbus@a0005000 {
+		compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xa0005000 0x100>;	// BRx, ORx, etc.
+		interrupt-parent = <&mpic>;
+		interrupts = <19 2>;
+
+		ranges = <
+			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
+			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
+			2 0x0 0xa3000000 0x00008000	// CAN (2 x CC770)
+			3 0x0 0xa3010000 0x00008000	// NAND FLASH
+
+		>;
+
+		flash@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00200000>;
+			};
+			partition@200000 {
+				label = "root";
+				reg = <0x00200000 0x00300000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x07a00000>;
+			};
+			partition@7f00000 {
+				label = "env1";
+				reg = <0x07f00000 0x00040000>;
+			};
+			partition@7f40000 {
+				label = "env2";
+				reg = <0x07f40000 0x00040000>;
+			};
+			partition@7f80000 {
+				label = "u-boot";
+				reg = <0x07f80000 0x00080000>;
+				read-only;
+			};
+		};
+
+		/* Note: CAN support needs be enabled in U-Boot */
+		can@2,0 {
+			compatible = "bosch,cc770"; // Bosch CC770
+			reg = <2 0x0 0x100>;
+			interrupts = <4 1>;
+			interrupt-parent = <&mpic>;
+			bosch,external-clock-frequency = <16000000>;
+			bosch,disconnect-rx1-input;
+			bosch,disconnect-tx1-output;
+			bosch,iso-low-speed-mux;
+			bosch,clock-out-frequency = <16000000>;
+		};
+
+		can@2,100 {
+			compatible = "bosch,cc770"; // Bosch CC770
+			reg = <2 0x100 0x100>;
+			interrupts = <4 1>;
+			interrupt-parent = <&mpic>;
+			bosch,external-clock-frequency = <16000000>;
+			bosch,disconnect-rx1-input;
+			bosch,disconnect-tx1-output;
+			bosch,iso-low-speed-mux;
+		};
+
+		/* Note: NAND support needs to be enabled in U-Boot */
+		upm@3,0 {
+			#address-cells = <0>;
+			#size-cells = <0>;
+			compatible = "tqc,tqm8548-upm-nand", "fsl,upm-nand";
+			reg = <3 0x0 0x800>;
+			fsl,upm-addr-offset = <0x10>;
+			fsl,upm-cmd-offset = <0x08>;
+			/* Micron MT29F8G08FAB multi-chip device */
+			fsl,upm-addr-line-cs-offsets = <0x0 0x200>;
+			fsl,upm-wait-flags = <0x5>;
+			chip-delay = <25>; // in micro-seconds
+
+			nand@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					    label = "fs";
+					    reg = <0x00000000 0x10000000>;
+				};
+			};
+		};
+	};
+
+	pci0: pci@a0008000 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xa0008000 0x1000>;
+		clock-frequency = <33333333>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 28 */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xa2000000 0 0x01000000>;
+	};
+
+	pci1: pcie@a000a000 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 (PEX) */
+			0x00000 0 0 1 &mpic 0 1
+			0x00000 0 0 2 &mpic 1 1
+			0x00000 0 0 3 &mpic 2 1
+			0x00000 0 0 4 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xb0000000 0xb0000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xaf000000 0 0x08000000>;
+		clock-frequency = <33333333>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xa000a000 0x1000>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xb0000000 0x02000000 0
+			          0xb0000000 0 0x10000000
+				  0x01000000 0 0x00000000 0x01000000 0
+				  0x00000000 0 0x08000000>;
+		};
+	};
+};
diff --git a/src/powerpc/tqm8548.dts b/src/powerpc/tqm8548.dts
new file mode 100644
index 000000000000..c737caff10c7
--- /dev/null
+++ b/src/powerpc/tqm8548.dts
@@ -0,0 +1,499 @@
+/*
+ * TQM8548 Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2008 Wolfgang Grandegger <wg@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "tqc,tqm8548";
+	compatible = "tqc,tqm8548";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
+	};
+
+	soc@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xe0000000 0x100000>;
+		bus-frequency = <0>;
+		compatible = "fsl,mpc8548-immr", "simple-bus";
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8548-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8548-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			dtt@48 {
+				compatible = "national,lm75";
+				reg = <0x48>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy1: ethernet-phy@0 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <1>;
+				};
+				phy2: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <3>;
+				};
+				phy4: ethernet-phy@4 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <4>;
+				};
+				phy5: ethernet-phy@5 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <5>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy4>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet3: ethernet@27000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <3>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			ranges = <0x0 0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi3>;
+			phy-handle = <&phy5>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi3: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	// global utilities reg
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+	localbus@e0005000 {
+		compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xe0005000 0x100>;	// BRx, ORx, etc.
+		interrupt-parent = <&mpic>;
+		interrupts = <19 2>;
+
+		ranges = <
+			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
+			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
+			2 0x0 0xe3000000 0x00008000	// CAN (2 x CC770)
+			3 0x0 0xe3010000 0x00008000	// NAND FLASH
+
+		>;
+
+		flash@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00200000>;
+			};
+			partition@200000 {
+				label = "root";
+				reg = <0x00200000 0x00300000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x07a00000>;
+			};
+			partition@7f00000 {
+				label = "env1";
+				reg = <0x07f00000 0x00040000>;
+			};
+			partition@7f40000 {
+				label = "env2";
+				reg = <0x07f40000 0x00040000>;
+			};
+			partition@7f80000 {
+				label = "u-boot";
+				reg = <0x07f80000 0x00080000>;
+				read-only;
+			};
+		};
+
+		/* Note: CAN support needs be enabled in U-Boot */
+		can@2,0 {
+			compatible = "bosch,cc770"; // Bosch CC770
+			reg = <2 0x0 0x100>;
+			interrupts = <4 1>;
+			interrupt-parent = <&mpic>;
+			bosch,external-clock-frequency = <16000000>;
+			bosch,disconnect-rx1-input;
+			bosch,disconnect-tx1-output;
+			bosch,iso-low-speed-mux;
+			bosch,clock-out-frequency = <16000000>;
+		};
+
+		can@2,100 {
+			compatible = "bosch,cc770"; // Bosch CC770
+			reg = <2 0x100 0x100>;
+			interrupts = <4 1>;
+			interrupt-parent = <&mpic>;
+			bosch,external-clock-frequency = <16000000>;
+			bosch,disconnect-rx1-input;
+			bosch,disconnect-tx1-output;
+			bosch,iso-low-speed-mux;
+		};
+
+		/* Note: NAND support needs to be enabled in U-Boot */
+		upm@3,0 {
+			#address-cells = <0>;
+			#size-cells = <0>;
+			compatible = "tqc,tqm8548-upm-nand", "fsl,upm-nand";
+			reg = <3 0x0 0x800>;
+			fsl,upm-addr-offset = <0x10>;
+			fsl,upm-cmd-offset = <0x08>;
+			/* Micron MT29F8G08FAB multi-chip device */
+			fsl,upm-addr-line-cs-offsets = <0x0 0x200>;
+			fsl,upm-wait-flags = <0x5>;
+			chip-delay = <25>; // in micro-seconds
+
+			nand@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					    label = "fs";
+					    reg = <0x00000000 0x10000000>;
+				};
+			};
+		};
+	};
+
+	pci0: pci@e0008000 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xe0008000 0x1000>;
+		clock-frequency = <33333333>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 28 */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
+	};
+
+	pci1: pcie@e000a000 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 (PEX) */
+			0x00000 0 0 1 &mpic 0 1
+			0x00000 0 0 2 &mpic 1 1
+			0x00000 0 0 3 &mpic 2 1
+			0x00000 0 0 4 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xef000000 0 0x08000000>;
+		clock-frequency = <33333333>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe000a000 0x1000>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xc0000000 0x02000000 0
+			          0xc0000000 0 0x20000000
+				  0x01000000 0 0x00000000 0x01000000 0
+				  0x00000000 0 0x08000000>;
+		};
+	};
+};
diff --git a/src/powerpc/tqm8555.dts b/src/powerpc/tqm8555.dts
new file mode 100644
index 000000000000..d0416a5cdddf
--- /dev/null
+++ b/src/powerpc/tqm8555.dts
@@ -0,0 +1,326 @@
+/*
+ * TQM 8555 Device Tree Source
+ *
+ * Copyright 2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "tqc,tqm8555";
+	compatible = "tqc,tqm8555";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8555@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	soc@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xe0000000 0x100000>;
+		bus-frequency = <0>;
+		compatible = "fsl,mpc8555-immr", "simple-bus";
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8555-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8540-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8540-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;
+			cache-size = <0x40000>;	// L2, 256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			dtt@48 {
+				compatible = "national,lm75";
+				reg = <0x48>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <1>;
+				};
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <3>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			device_type = "open-pic";
+			compatible = "chrp,open-pic";
+		};
+
+		cpm@919c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-cpm", "fsl,cpm2", "simple-bus";
+			reg = <0x919c0 0x30>;
+			ranges;
+
+			muram@80000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x80000 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0 0x2000 0x9000 0x1000>;
+				};
+			};
+
+			brg@919f0 {
+				compatible = "fsl,mpc8555-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <0x919f0 0x10 0x915f0 0x10>;
+				clock-frequency = <0>;
+			};
+
+			cpmpic: pic@90c00 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupts = <46 2>;
+				interrupt-parent = <&mpic>;
+				reg = <0x90c00 0x80>;
+				compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic";
+			};
+		};
+	};
+
+	pci0: pci@e0008000 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xe0008000 0x1000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 28 */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
+	};
+};
diff --git a/src/powerpc/tqm8560.dts b/src/powerpc/tqm8560.dts
new file mode 100644
index 000000000000..f9a11ebf736c
--- /dev/null
+++ b/src/powerpc/tqm8560.dts
@@ -0,0 +1,399 @@
+/*
+ * TQM 8560 Device Tree Source
+ *
+ * Copyright 2008 Freescale Semiconductor Inc.
+ * Copyright 2008 Wolfgang Grandegger <wg@grandegger.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "tqc,tqm8560";
+	compatible = "tqc,tqm8560";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8560@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	soc@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xe0000000 0x100000>;
+		bus-frequency = <0>;
+		compatible = "fsl,mpc8560-immr", "simple-bus";
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8540-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8540-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;
+			cache-size = <0x40000>;	// L2, 256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			dtt@48 {
+				compatible = "national,lm75";
+				reg = <0x48>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <1>;
+				};
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <3>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			device_type = "open-pic";
+			compatible = "chrp,open-pic";
+		};
+
+		cpm@919c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-cpm", "fsl,cpm2", "simple-bus";
+			reg = <0x919c0 0x30>;
+			ranges;
+
+			muram@80000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x80000 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0 0x4000 0x9000 0x2000>;
+				};
+			};
+
+			brg@919f0 {
+				compatible = "fsl,mpc8560-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <0x919f0 0x10 0x915f0 0x10>;
+				clock-frequency = <0>;
+			};
+
+			cpmpic: pic@90c00 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupts = <46 2>;
+				interrupt-parent = <&mpic>;
+				reg = <0x90c00 0x80>;
+				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
+			};
+
+			serial0: serial@91a00 {
+				device_type = "serial";
+				compatible = "fsl,mpc8560-scc-uart",
+				             "fsl,cpm2-scc-uart";
+				reg = <0x91a00 0x20 0x88000 0x100>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x800000>;
+				current-speed = <115200>;
+				interrupts = <40 8>;
+				interrupt-parent = <&cpmpic>;
+			};
+
+			serial1: serial@91a20 {
+				device_type = "serial";
+				compatible = "fsl,mpc8560-scc-uart",
+				             "fsl,cpm2-scc-uart";
+				reg = <0x91a20 0x20 0x88100 0x100>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <0x4a00000>;
+				current-speed = <115200>;
+				interrupts = <41 8>;
+				interrupt-parent = <&cpmpic>;
+			};
+
+			enet2: ethernet@91340 {
+				device_type = "network";
+				compatible = "fsl,mpc8560-fcc-enet",
+				             "fsl,cpm2-fcc-enet";
+				reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				fsl,cpm-command = <0x1a400300>;
+				interrupts = <34 8>;
+				interrupt-parent = <&cpmpic>;
+				phy-handle = <&phy3>;
+			};
+		};
+	};
+
+	localbus@e0005000 {
+		compatible = "fsl,mpc8560-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xe0005000 0x100>;	// BRx, ORx, etc.
+		interrupt-parent = <&mpic>;
+		interrupts = <19 2>;
+
+		ranges = <
+			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
+			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
+			2 0x0 0xe3000000 0x00008000	// CAN (2 x i82527)
+		>;
+
+		flash@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00200000>;
+			};
+			partition@200000 {
+				label = "root";
+				reg = <0x00200000 0x00300000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x07a00000>;
+			};
+			partition@7f00000 {
+				label = "env1";
+				reg = <0x07f00000 0x00040000>;
+			};
+			partition@7f40000 {
+				label = "env2";
+				reg = <0x07f40000 0x00040000>;
+			};
+			partition@7f80000 {
+				label = "u-boot";
+				reg = <0x07f80000 0x00080000>;
+				read-only;
+			};
+		};
+
+		/* Note: CAN support needs be enabled in U-Boot */
+		can0@2,0 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x0 0x100>;
+			interrupts = <4 1>;
+			interrupt-parent = <&mpic>;
+		};
+
+		can1@2,100 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x100 0x100>;
+			interrupts = <4 1>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	pci0: pci@e0008000 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xe0008000 0x1000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 28 */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
+	};
+};
diff --git a/src/powerpc/tqm8xx.dts b/src/powerpc/tqm8xx.dts
new file mode 100644
index 000000000000..3d1446b99c7e
--- /dev/null
+++ b/src/powerpc/tqm8xx.dts
@@ -0,0 +1,196 @@
+/*
+ * TQM8XX Device Tree Source
+ *
+ * Heiko Schocher <hs@denx.de>
+ * 2010 DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "TQM8xx";
+	compatible = "tqc,tqm8xx";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		mdio1 = &phy1;
+		serial0 = &smc1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,860@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <16>;	// 16 bytes
+			i-cache-line-size = <16>;	// 16 bytes
+			d-cache-size = <0x1000>;		// L1, 4K
+			i-cache-size = <0x1000>;		// L1, 4K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			interrupts = <15 2>;	// decrementer interrupt
+			interrupt-parent = <&PIC>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	localbus@fff00100 {
+		compatible = "fsl,mpc860-localbus", "fsl,pq1-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xfff00100 0x40>;
+
+		ranges = <
+			0x0 0x0 0x40000000 0x800000
+			0x3 0x0 0xc0000000 0x200
+		>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <4>;
+			device-width = <2>;
+		};
+
+		/* Note: CAN support needs be enabled in U-Boot */
+		can@3,0 {
+			compatible = "intc,82527";
+			reg = <3 0x0 0x80>;
+			interrupts = <8 1>;
+			interrupt-parent = <&PIC>;
+			bosch,external-clock-frequency = <16000000>;
+			bosch,disconnect-rx1-input;
+			bosch,disconnect-tx1-output;
+			bosch,iso-low-speed-mux;
+			bosch,clock-out-frequency = <16000000>;
+		};
+
+		can@3,100 {
+			compatible = "intc,82527";
+			reg = <3 0x100 0x80>;
+			interrupts = <8 1>;
+			interrupt-parent = <&PIC>;
+			bosch,external-clock-frequency = <16000000>;
+			bosch,disconnect-rx1-input;
+			bosch,disconnect-tx1-output;
+			bosch,iso-low-speed-mux;
+		};
+	};
+
+	soc@fff00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xfff00000 0x00004000>;
+
+		phy1: mdio@e00 {
+			compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio";
+			reg = <0xe00 0x188>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			PHY: ethernet-phy@f {
+				reg = <0xf>;
+			};
+		};
+
+		eth1: ethernet@e00 {
+			device_type = "network";
+			compatible = "fsl,mpc866-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <0xe00 0x188>;
+			interrupts = <3 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY>;
+			linux,network-index = <1>;
+		};
+
+		PIC: pic@0 {
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x0 0x24>;
+			compatible = "fsl,mpc860-pic", "fsl,pq1-pic";
+		};
+
+		cpm@9c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc860-cpm", "fsl,cpm1";
+			ranges;
+			reg = <0x9c0 0x40>;
+			brg-frequency = <0>;
+			interrupts = <0 2>;	// cpm error interrupt
+			interrupt-parent = <&CPM_PIC>;
+
+			muram@2000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x2000 0x2000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x2000>;
+				};
+			};
+
+			brg@9f0 {
+				compatible = "fsl,mpc860-brg",
+					     "fsl,cpm1-brg",
+					     "fsl,cpm-brg";
+				reg = <0x9f0 0x10>;
+				clock-frequency = <0>;
+			};
+
+			CPM_PIC: pic@930 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupts = <5 2 0 2>;
+				interrupt-parent = <&PIC>;
+				reg = <0x930 0x20>;
+				compatible = "fsl,mpc860-cpm-pic",
+				             "fsl,cpm1-pic";
+			};
+
+
+			smc1: serial@a80 {
+				device_type = "serial";
+				compatible = "fsl,mpc860-smc-uart",
+				             "fsl,cpm1-smc-uart";
+				reg = <0xa80 0x10 0x3e80 0x40>;
+				interrupts = <4>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x90>;
+			};
+
+			eth0: ethernet@a00 {
+				device_type = "network";
+				compatible = "fsl,mpc860-scc-enet",
+				             "fsl,cpm1-scc-enet";
+				reg = <0xa00 0x18 0x3c00 0x100>;
+				interrupts = <30>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-command = <0000>;
+				linux,network-index = <0>;
+				fixed-link = <0 0 10 0 0>;
+			};
+		};
+	};
+};
diff --git a/src/powerpc/uc101.dts b/src/powerpc/uc101.dts
new file mode 100644
index 000000000000..5c462194ef06
--- /dev/null
+++ b/src/powerpc/uc101.dts
@@ -0,0 +1,156 @@
+/*
+ * Manroland uc101 board Device Tree Source
+ *
+ * Copyright (C) 2009 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 { gpio-controller; };
+&gpt1 { gpio-controller; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+&gpt6 { gpio-controller; };
+&gpt7 { gpio-controller; };
+
+/ {
+	model = "manroland,uc101";
+	compatible = "manroland,uc101";
+
+	soc5200@f0000000 {
+		rtc@800 {
+			status = "disabled";
+		};
+
+		can@900 {
+			status = "disabled";
+		};
+
+		can@980 {
+			status = "disabled";
+		};
+
+		spi@f00 {
+			status = "disabled";
+		};
+
+		usb@1000 {
+			status = "disabled";
+		};
+
+		psc@2000 {	// PSC1
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2200 {	// PSC2
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2400 {	// PSC3
+			status = "disabled";
+		};
+
+		psc@2600 {	// PSC4
+			status = "disabled";
+		};
+
+		psc@2800 {	// PSC5
+			status = "disabled";
+		};
+
+		psc@2c00 {	// PSC6
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@0 {
+				compatible = "intel,lxt971";
+				reg = <0>;
+			};
+		};
+
+		i2c@3d00 {
+			status = "disabled";
+		};
+
+		i2c@3d40 {
+			fsl,preserve-clocking;
+			clock-frequency = <400000>;
+
+			hwmon@2c {
+				compatible = "ad,adm9240";
+				reg = <0x2c>;
+			};
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+	};
+
+	pci@f0000d00 {
+		status = "disabled";
+	};
+
+	localbus {
+		ranges = <0 0 0xff800000 0x00800000
+			  1 0 0x80000000 0x00800000
+			  3 0 0x80000000 0x00800000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x00800000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@0 {
+				label = "DTS";
+				reg = <0x0 0x00100000>;
+			};
+			partition@100000 {
+				label = "Kernel";
+				reg = <0x100000 0x00200000>;
+			};
+			partition@300000 {
+				label = "RootFS";
+				reg = <0x00300000 0x00200000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x00200000>;
+			};
+			partition@700000 {
+				label = "U-Boot";
+				reg = <0x00700000 0x00040000>;
+			};
+			partition@740000 {
+				label = "Env";
+				reg = <0x00740000 0x00010000>;
+			};
+			partition@750000 {
+				label = "red. Env";
+				reg = <0x00750000 0x00010000>;
+			};
+			partition@760000 {
+				label = "reserve";
+				reg = <0x00760000 0x000a0000>;
+			};
+		};
+
+	};
+};
diff --git a/src/powerpc/virtex440-ml507.dts b/src/powerpc/virtex440-ml507.dts
new file mode 100644
index 000000000000..391a4e299783
--- /dev/null
+++ b/src/powerpc/virtex440-ml507.dts
@@ -0,0 +1,406 @@
+/*
+ * This file supports the Xilinx ML507 board with the 440 processor.
+ * A reference design for the FPGA is provided at http://git.xilinx.com.
+ *
+ * (C) Copyright 2008 Xilinx, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ * ---
+ *
+ * Device Tree Generator version: 1.1
+ *
+ * CAUTION: This file is automatically generated by libgen.
+ * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
+ *
+ * XPS project directory: ml507_ppc440_emb_ref
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "xlnx,virtex440";
+	dcr-parent = <&ppc440_0>;
+	model = "testing";
+	DDR2_SDRAM: memory@0 {
+		device_type = "memory";
+		reg = < 0 0x10000000 >;
+	} ;
+	chosen {
+		bootargs = "console=ttyS0 root=/dev/ram";
+		linux,stdout-path = &RS232_Uart_1;
+	} ;
+	cpus {
+		#address-cells = <1>;
+		#cpus = <1>;
+		#size-cells = <0>;
+		ppc440_0: cpu@0 {
+			clock-frequency = <400000000>;
+			compatible = "PowerPC,440", "ibm,ppc440";
+			d-cache-line-size = <0x20>;
+			d-cache-size = <0x8000>;
+			dcr-access-method = "native";
+			dcr-controller ;
+			device_type = "cpu";
+			i-cache-line-size = <0x20>;
+			i-cache-size = <0x8000>;
+			model = "PowerPC,440";
+			reg = <0>;
+			timebase-frequency = <400000000>;
+			xlnx,apu-control = <1>;
+			xlnx,apu-udi-0 = <0>;
+			xlnx,apu-udi-1 = <0>;
+			xlnx,apu-udi-10 = <0>;
+			xlnx,apu-udi-11 = <0>;
+			xlnx,apu-udi-12 = <0>;
+			xlnx,apu-udi-13 = <0>;
+			xlnx,apu-udi-14 = <0>;
+			xlnx,apu-udi-15 = <0>;
+			xlnx,apu-udi-2 = <0>;
+			xlnx,apu-udi-3 = <0>;
+			xlnx,apu-udi-4 = <0>;
+			xlnx,apu-udi-5 = <0>;
+			xlnx,apu-udi-6 = <0>;
+			xlnx,apu-udi-7 = <0>;
+			xlnx,apu-udi-8 = <0>;
+			xlnx,apu-udi-9 = <0>;
+			xlnx,dcr-autolock-enable = <1>;
+			xlnx,dcu-rd-ld-cache-plb-prio = <0>;
+			xlnx,dcu-rd-noncache-plb-prio = <0>;
+			xlnx,dcu-rd-touch-plb-prio = <0>;
+			xlnx,dcu-rd-urgent-plb-prio = <0>;
+			xlnx,dcu-wr-flush-plb-prio = <0>;
+			xlnx,dcu-wr-store-plb-prio = <0>;
+			xlnx,dcu-wr-urgent-plb-prio = <0>;
+			xlnx,dma0-control = <0>;
+			xlnx,dma0-plb-prio = <0>;
+			xlnx,dma0-rxchannelctrl = <0x1010000>;
+			xlnx,dma0-rxirqtimer = <0x3ff>;
+			xlnx,dma0-txchannelctrl = <0x1010000>;
+			xlnx,dma0-txirqtimer = <0x3ff>;
+			xlnx,dma1-control = <0>;
+			xlnx,dma1-plb-prio = <0>;
+			xlnx,dma1-rxchannelctrl = <0x1010000>;
+			xlnx,dma1-rxirqtimer = <0x3ff>;
+			xlnx,dma1-txchannelctrl = <0x1010000>;
+			xlnx,dma1-txirqtimer = <0x3ff>;
+			xlnx,dma2-control = <0>;
+			xlnx,dma2-plb-prio = <0>;
+			xlnx,dma2-rxchannelctrl = <0x1010000>;
+			xlnx,dma2-rxirqtimer = <0x3ff>;
+			xlnx,dma2-txchannelctrl = <0x1010000>;
+			xlnx,dma2-txirqtimer = <0x3ff>;
+			xlnx,dma3-control = <0>;
+			xlnx,dma3-plb-prio = <0>;
+			xlnx,dma3-rxchannelctrl = <0x1010000>;
+			xlnx,dma3-rxirqtimer = <0x3ff>;
+			xlnx,dma3-txchannelctrl = <0x1010000>;
+			xlnx,dma3-txirqtimer = <0x3ff>;
+			xlnx,endian-reset = <0>;
+			xlnx,generate-plb-timespecs = <1>;
+			xlnx,icu-rd-fetch-plb-prio = <0>;
+			xlnx,icu-rd-spec-plb-prio = <0>;
+			xlnx,icu-rd-touch-plb-prio = <0>;
+			xlnx,interconnect-imask = <0xffffffff>;
+			xlnx,mplb-allow-lock-xfer = <1>;
+			xlnx,mplb-arb-mode = <0>;
+			xlnx,mplb-awidth = <0x20>;
+			xlnx,mplb-counter = <0x500>;
+			xlnx,mplb-dwidth = <0x80>;
+			xlnx,mplb-max-burst = <8>;
+			xlnx,mplb-native-dwidth = <0x80>;
+			xlnx,mplb-p2p = <0>;
+			xlnx,mplb-prio-dcur = <2>;
+			xlnx,mplb-prio-dcuw = <3>;
+			xlnx,mplb-prio-icu = <4>;
+			xlnx,mplb-prio-splb0 = <1>;
+			xlnx,mplb-prio-splb1 = <0>;
+			xlnx,mplb-read-pipe-enable = <1>;
+			xlnx,mplb-sync-tattribute = <0>;
+			xlnx,mplb-wdog-enable = <1>;
+			xlnx,mplb-write-pipe-enable = <1>;
+			xlnx,mplb-write-post-enable = <1>;
+			xlnx,num-dma = <1>;
+			xlnx,pir = <0xf>;
+			xlnx,ppc440mc-addr-base = <0>;
+			xlnx,ppc440mc-addr-high = <0xfffffff>;
+			xlnx,ppc440mc-arb-mode = <0>;
+			xlnx,ppc440mc-bank-conflict-mask = <0xc00000>;
+			xlnx,ppc440mc-control = <0xf810008f>;
+			xlnx,ppc440mc-max-burst = <8>;
+			xlnx,ppc440mc-prio-dcur = <2>;
+			xlnx,ppc440mc-prio-dcuw = <3>;
+			xlnx,ppc440mc-prio-icu = <4>;
+			xlnx,ppc440mc-prio-splb0 = <1>;
+			xlnx,ppc440mc-prio-splb1 = <0>;
+			xlnx,ppc440mc-row-conflict-mask = <0x3ffe00>;
+			xlnx,ppcdm-asyncmode = <0>;
+			xlnx,ppcds-asyncmode = <0>;
+			xlnx,user-reset = <0>;
+			DMA0: sdma@80 {
+				compatible = "xlnx,ll-dma-1.00.a";
+				dcr-reg = < 0x80 0x11 >;
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 10 2 11 2 >;
+			} ;
+		} ;
+	} ;
+	plb_v46_0: plb@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,plb-v46-1.03.a", "simple-bus";
+		ranges ;
+		DIP_Switches_8Bit: gpio@81460000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 7 2 >;
+			reg = < 0x81460000 0x10000 >;
+			xlnx,all-inputs = <1>;
+			xlnx,all-inputs-2 = <0>;
+			xlnx,dout-default = <0>;
+			xlnx,dout-default-2 = <0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <8>;
+			xlnx,interrupt-present = <1>;
+			xlnx,is-bidir = <1>;
+			xlnx,is-bidir-2 = <1>;
+			xlnx,is-dual = <0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		FLASH: flash@fc000000 {
+			bank-width = <2>;
+			compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
+			reg = < 0xfc000000 0x2000000 >;
+			xlnx,family = "virtex5";
+			xlnx,include-datawidth-matching-0 = <0x1>;
+			xlnx,include-datawidth-matching-1 = <0x0>;
+			xlnx,include-datawidth-matching-2 = <0x0>;
+			xlnx,include-datawidth-matching-3 = <0x0>;
+			xlnx,include-negedge-ioregs = <0x0>;
+			xlnx,include-plb-ipif = <0x1>;
+			xlnx,include-wrbuf = <0x1>;
+			xlnx,max-mem-width = <0x10>;
+			xlnx,mch-native-dwidth = <0x20>;
+			xlnx,mch-plb-clk-period-ps = <0x2710>;
+			xlnx,mch-splb-awidth = <0x20>;
+			xlnx,mch0-accessbuf-depth = <0x10>;
+			xlnx,mch0-protocol = <0x0>;
+			xlnx,mch0-rddatabuf-depth = <0x10>;
+			xlnx,mch1-accessbuf-depth = <0x10>;
+			xlnx,mch1-protocol = <0x0>;
+			xlnx,mch1-rddatabuf-depth = <0x10>;
+			xlnx,mch2-accessbuf-depth = <0x10>;
+			xlnx,mch2-protocol = <0x0>;
+			xlnx,mch2-rddatabuf-depth = <0x10>;
+			xlnx,mch3-accessbuf-depth = <0x10>;
+			xlnx,mch3-protocol = <0x0>;
+			xlnx,mch3-rddatabuf-depth = <0x10>;
+			xlnx,mem0-width = <0x10>;
+			xlnx,mem1-width = <0x20>;
+			xlnx,mem2-width = <0x20>;
+			xlnx,mem3-width = <0x20>;
+			xlnx,num-banks-mem = <0x1>;
+			xlnx,num-channels = <0x2>;
+			xlnx,priority-mode = <0x0>;
+			xlnx,synch-mem-0 = <0x0>;
+			xlnx,synch-mem-1 = <0x0>;
+			xlnx,synch-mem-2 = <0x0>;
+			xlnx,synch-mem-3 = <0x0>;
+			xlnx,synch-pipedelay-0 = <0x2>;
+			xlnx,synch-pipedelay-1 = <0x2>;
+			xlnx,synch-pipedelay-2 = <0x2>;
+			xlnx,synch-pipedelay-3 = <0x2>;
+			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
+			xlnx,tavdv-ps-mem-1 = <0x3a98>;
+			xlnx,tavdv-ps-mem-2 = <0x3a98>;
+			xlnx,tavdv-ps-mem-3 = <0x3a98>;
+			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
+			xlnx,tcedv-ps-mem-1 = <0x3a98>;
+			xlnx,tcedv-ps-mem-2 = <0x3a98>;
+			xlnx,tcedv-ps-mem-3 = <0x3a98>;
+			xlnx,thzce-ps-mem-0 = <0x88b8>;
+			xlnx,thzce-ps-mem-1 = <0x1b58>;
+			xlnx,thzce-ps-mem-2 = <0x1b58>;
+			xlnx,thzce-ps-mem-3 = <0x1b58>;
+			xlnx,thzoe-ps-mem-0 = <0x1b58>;
+			xlnx,thzoe-ps-mem-1 = <0x1b58>;
+			xlnx,thzoe-ps-mem-2 = <0x1b58>;
+			xlnx,thzoe-ps-mem-3 = <0x1b58>;
+			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
+			xlnx,tlzwe-ps-mem-1 = <0x0>;
+			xlnx,tlzwe-ps-mem-2 = <0x0>;
+			xlnx,tlzwe-ps-mem-3 = <0x0>;
+			xlnx,twc-ps-mem-0 = <0x2af8>;
+			xlnx,twc-ps-mem-1 = <0x3a98>;
+			xlnx,twc-ps-mem-2 = <0x3a98>;
+			xlnx,twc-ps-mem-3 = <0x3a98>;
+			xlnx,twp-ps-mem-0 = <0x11170>;
+			xlnx,twp-ps-mem-1 = <0x2ee0>;
+			xlnx,twp-ps-mem-2 = <0x2ee0>;
+			xlnx,twp-ps-mem-3 = <0x2ee0>;
+			xlnx,xcl0-linesize = <0x4>;
+			xlnx,xcl0-writexfer = <0x1>;
+			xlnx,xcl1-linesize = <0x4>;
+			xlnx,xcl1-writexfer = <0x1>;
+			xlnx,xcl2-linesize = <0x4>;
+			xlnx,xcl2-writexfer = <0x1>;
+			xlnx,xcl3-linesize = <0x4>;
+			xlnx,xcl3-writexfer = <0x1>;
+		} ;
+		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,compound";
+			ethernet@81c00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "xlnx,xps-ll-temac-1.01.b";
+				device_type = "network";
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 5 2 >;
+				llink-connected = <&DMA0>;
+				local-mac-address = [ 02 00 00 00 00 00 ];
+				reg = < 0x81c00000 0x40 >;
+				xlnx,bus2core-clk-ratio = <1>;
+				xlnx,phy-type = <1>;
+				xlnx,phyaddr = <1>;
+				xlnx,rxcsum = <1>;
+				xlnx,rxfifo = <0x1000>;
+				xlnx,temac-type = <0>;
+				xlnx,txcsum = <1>;
+				xlnx,txfifo = <0x1000>;
+                                phy-handle = <&phy7>;
+                                clock-frequency = <100000000>;
+                                phy7: phy@7 {
+                                          compatible = "marvell,88e1111";
+                                          reg = <7>;
+                                } ;
+			} ;
+		} ;
+		IIC_EEPROM: i2c@81600000 {
+			compatible = "xlnx,xps-iic-2.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 6 2 >;
+			reg = < 0x81600000 0x10000 >;
+			xlnx,clk-freq = <0x5f5e100>;
+			xlnx,family = "virtex5";
+			xlnx,gpo-width = <0x1>;
+			xlnx,iic-freq = <0x186a0>;
+			xlnx,scl-inertial-delay = <0x0>;
+			xlnx,sda-inertial-delay = <0x0>;
+			xlnx,ten-bit-adr = <0x0>;
+		} ;
+		LEDs_8Bit: gpio@81400000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			reg = < 0x81400000 0x10000 >;
+			xlnx,all-inputs = <0>;
+			xlnx,all-inputs-2 = <0>;
+			xlnx,dout-default = <0>;
+			xlnx,dout-default-2 = <0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <8>;
+			xlnx,interrupt-present = <0>;
+			xlnx,is-bidir = <1>;
+			xlnx,is-bidir-2 = <1>;
+			xlnx,is-dual = <0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		LEDs_Positions: gpio@81420000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			reg = < 0x81420000 0x10000 >;
+			xlnx,all-inputs = <0>;
+			xlnx,all-inputs-2 = <0>;
+			xlnx,dout-default = <0>;
+			xlnx,dout-default-2 = <0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <5>;
+			xlnx,interrupt-present = <0>;
+			xlnx,is-bidir = <1>;
+			xlnx,is-bidir-2 = <1>;
+			xlnx,is-dual = <0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		Push_Buttons_5Bit: gpio@81440000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 8 2 >;
+			reg = < 0x81440000 0x10000 >;
+			xlnx,all-inputs = <1>;
+			xlnx,all-inputs-2 = <0>;
+			xlnx,dout-default = <0>;
+			xlnx,dout-default-2 = <0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <5>;
+			xlnx,interrupt-present = <1>;
+			xlnx,is-bidir = <1>;
+			xlnx,is-bidir-2 = <1>;
+			xlnx,is-dual = <0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		RS232_Uart_1: serial@83e00000 {
+			clock-frequency = <100000000>;
+			compatible = "xlnx,xps-uart16550-2.00.b", "ns16550";
+			current-speed = <9600>;
+			device_type = "serial";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 9 2 >;
+			reg = < 0x83e00000 0x10000 >;
+			reg-offset = <0x1003>;
+			reg-shift = <2>;
+			xlnx,family = "virtex5";
+			xlnx,has-external-rclk = <0>;
+			xlnx,has-external-xin = <0>;
+			xlnx,is-a-16550 = <1>;
+		} ;
+		SysACE_CompactFlash: sysace@83600000 {
+			compatible = "xlnx,xps-sysace-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 4 2 >;
+			reg = < 0x83600000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,mem-width = <0x10>;
+		} ;
+		xps_bram_if_cntlr_1: xps-bram-if-cntlr@ffff0000 {
+			compatible = "xlnx,xps-bram-if-cntlr-1.00.a";
+			reg = < 0xffff0000 0x10000 >;
+			xlnx,family = "virtex5";
+		} ;
+		xps_intc_0: interrupt-controller@81800000 {
+			#interrupt-cells = <2>;
+			compatible = "xlnx,xps-intc-1.00.a";
+			interrupt-controller ;
+			reg = < 0x81800000 0x10000 >;
+			xlnx,num-intr-inputs = <0xc>;
+		} ;
+		xps_timebase_wdt_1: xps-timebase-wdt@83a00000 {
+			compatible = "xlnx,xps-timebase-wdt-1.00.b";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 2 0 1 2 >;
+			reg = < 0x83a00000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,wdt-enable-once = <0>;
+			xlnx,wdt-interval = <0x1e>;
+		} ;
+		xps_timer_1: timer@83c00000 {
+			compatible = "xlnx,xps-timer-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 3 2 >;
+			reg = < 0x83c00000 0x10000 >;
+			xlnx,count-width = <0x20>;
+			xlnx,family = "virtex5";
+			xlnx,gen0-assert = <1>;
+			xlnx,gen1-assert = <1>;
+			xlnx,one-timer-only = <1>;
+			xlnx,trig0-assert = <1>;
+			xlnx,trig1-assert = <1>;
+		} ;
+	} ;
+}  ;
diff --git a/src/powerpc/virtex440-ml510.dts b/src/powerpc/virtex440-ml510.dts
new file mode 100644
index 000000000000..81a8dc2c6365
--- /dev/null
+++ b/src/powerpc/virtex440-ml510.dts
@@ -0,0 +1,465 @@
+/*
+ * Xilinx ML510 Reference Design support
+ *
+ * This DTS file was created for the ml510_bsb1_pcores_ppc440 reference design.
+ * The reference design contains a bug which prevent PCI DMA from working
+ * properly.  A description of the bug is given in the plbv46_pci section. It
+ * needs to be fixed by the user until Xilinx updates their reference design.
+ *
+ * Copyright 2009, Roderick Colenbrander
+ */
+
+/dts-v1/;
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "xlnx,ml510-ref-design", "xlnx,virtex440";
+	dcr-parent = <&ppc440_0>;
+	DDR2_SDRAM_DIMM0: memory@0 {
+		device_type = "memory";
+		reg = < 0x0 0x20000000 >;
+	} ;
+	alias {
+		ethernet0 = &Hard_Ethernet_MAC;
+		serial0 = &RS232_Uart_1;
+	} ;
+	chosen {
+		bootargs = "console=ttyS0 root=/dev/ram";
+		linux,stdout-path = "/plb@0/serial@83e00000";
+	} ;
+	cpus {
+		#address-cells = <1>;
+		#cpus = <0x1>;
+		#size-cells = <0>;
+		ppc440_0: cpu@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clock-frequency = <300000000>;
+			compatible = "PowerPC,440", "ibm,ppc440";
+			d-cache-line-size = <0x20>;
+			d-cache-size = <0x8000>;
+			dcr-access-method = "native";
+			dcr-controller ;
+			device_type = "cpu";
+			i-cache-line-size = <0x20>;
+			i-cache-size = <0x8000>;
+			model = "PowerPC,440";
+			reg = <0>;
+			timebase-frequency = <300000000>;
+			xlnx,apu-control = <0x2000>;
+			xlnx,apu-udi-0 = <0x0>;
+			xlnx,apu-udi-1 = <0x0>;
+			xlnx,apu-udi-10 = <0x0>;
+			xlnx,apu-udi-11 = <0x0>;
+			xlnx,apu-udi-12 = <0x0>;
+			xlnx,apu-udi-13 = <0x0>;
+			xlnx,apu-udi-14 = <0x0>;
+			xlnx,apu-udi-15 = <0x0>;
+			xlnx,apu-udi-2 = <0x0>;
+			xlnx,apu-udi-3 = <0x0>;
+			xlnx,apu-udi-4 = <0x0>;
+			xlnx,apu-udi-5 = <0x0>;
+			xlnx,apu-udi-6 = <0x0>;
+			xlnx,apu-udi-7 = <0x0>;
+			xlnx,apu-udi-8 = <0x0>;
+			xlnx,apu-udi-9 = <0x0>;
+			xlnx,dcr-autolock-enable = <0x1>;
+			xlnx,dcu-rd-ld-cache-plb-prio = <0x0>;
+			xlnx,dcu-rd-noncache-plb-prio = <0x0>;
+			xlnx,dcu-rd-touch-plb-prio = <0x0>;
+			xlnx,dcu-rd-urgent-plb-prio = <0x0>;
+			xlnx,dcu-wr-flush-plb-prio = <0x0>;
+			xlnx,dcu-wr-store-plb-prio = <0x0>;
+			xlnx,dcu-wr-urgent-plb-prio = <0x0>;
+			xlnx,dma0-control = <0x0>;
+			xlnx,dma0-plb-prio = <0x0>;
+			xlnx,dma0-rxchannelctrl = <0x1010000>;
+			xlnx,dma0-rxirqtimer = <0x3ff>;
+			xlnx,dma0-txchannelctrl = <0x1010000>;
+			xlnx,dma0-txirqtimer = <0x3ff>;
+			xlnx,dma1-control = <0x0>;
+			xlnx,dma1-plb-prio = <0x0>;
+			xlnx,dma1-rxchannelctrl = <0x1010000>;
+			xlnx,dma1-rxirqtimer = <0x3ff>;
+			xlnx,dma1-txchannelctrl = <0x1010000>;
+			xlnx,dma1-txirqtimer = <0x3ff>;
+			xlnx,dma2-control = <0x0>;
+			xlnx,dma2-plb-prio = <0x0>;
+			xlnx,dma2-rxchannelctrl = <0x1010000>;
+			xlnx,dma2-rxirqtimer = <0x3ff>;
+			xlnx,dma2-txchannelctrl = <0x1010000>;
+			xlnx,dma2-txirqtimer = <0x3ff>;
+			xlnx,dma3-control = <0x0>;
+			xlnx,dma3-plb-prio = <0x0>;
+			xlnx,dma3-rxchannelctrl = <0x1010000>;
+			xlnx,dma3-rxirqtimer = <0x3ff>;
+			xlnx,dma3-txchannelctrl = <0x1010000>;
+			xlnx,dma3-txirqtimer = <0x3ff>;
+			xlnx,endian-reset = <0x0>;
+			xlnx,generate-plb-timespecs = <0x1>;
+			xlnx,icu-rd-fetch-plb-prio = <0x0>;
+			xlnx,icu-rd-spec-plb-prio = <0x0>;
+			xlnx,icu-rd-touch-plb-prio = <0x0>;
+			xlnx,interconnect-imask = <0xffffffff>;
+			xlnx,mplb-allow-lock-xfer = <0x1>;
+			xlnx,mplb-arb-mode = <0x0>;
+			xlnx,mplb-awidth = <0x20>;
+			xlnx,mplb-counter = <0x500>;
+			xlnx,mplb-dwidth = <0x80>;
+			xlnx,mplb-max-burst = <0x8>;
+			xlnx,mplb-native-dwidth = <0x80>;
+			xlnx,mplb-p2p = <0x0>;
+			xlnx,mplb-prio-dcur = <0x2>;
+			xlnx,mplb-prio-dcuw = <0x3>;
+			xlnx,mplb-prio-icu = <0x4>;
+			xlnx,mplb-prio-splb0 = <0x1>;
+			xlnx,mplb-prio-splb1 = <0x0>;
+			xlnx,mplb-read-pipe-enable = <0x1>;
+			xlnx,mplb-sync-tattribute = <0x0>;
+			xlnx,mplb-wdog-enable = <0x1>;
+			xlnx,mplb-write-pipe-enable = <0x1>;
+			xlnx,mplb-write-post-enable = <0x1>;
+			xlnx,num-dma = <0x0>;
+			xlnx,pir = <0xf>;
+			xlnx,ppc440mc-addr-base = <0x0>;
+			xlnx,ppc440mc-addr-high = <0x1fffffff>;
+			xlnx,ppc440mc-arb-mode = <0x0>;
+			xlnx,ppc440mc-bank-conflict-mask = <0x1800000>;
+			xlnx,ppc440mc-control = <0xf810008f>;
+			xlnx,ppc440mc-max-burst = <0x8>;
+			xlnx,ppc440mc-prio-dcur = <0x2>;
+			xlnx,ppc440mc-prio-dcuw = <0x3>;
+			xlnx,ppc440mc-prio-icu = <0x4>;
+			xlnx,ppc440mc-prio-splb0 = <0x1>;
+			xlnx,ppc440mc-prio-splb1 = <0x0>;
+			xlnx,ppc440mc-row-conflict-mask = <0x7ffe00>;
+			xlnx,ppcdm-asyncmode = <0x0>;
+			xlnx,ppcds-asyncmode = <0x0>;
+			xlnx,user-reset = <0x0>;
+		} ;
+	} ;
+	plb_v46_0: plb@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,plb-v46-1.03.a", "simple-bus";
+		ranges ;
+		FLASH: flash@fc000000 {
+			bank-width = <2>;
+			compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
+			reg = < 0xfc000000 0x2000000 >;
+			xlnx,family = "virtex5";
+			xlnx,include-datawidth-matching-0 = <0x1>;
+			xlnx,include-datawidth-matching-1 = <0x0>;
+			xlnx,include-datawidth-matching-2 = <0x0>;
+			xlnx,include-datawidth-matching-3 = <0x0>;
+			xlnx,include-negedge-ioregs = <0x0>;
+			xlnx,include-plb-ipif = <0x1>;
+			xlnx,include-wrbuf = <0x1>;
+			xlnx,max-mem-width = <0x10>;
+			xlnx,mch-native-dwidth = <0x20>;
+			xlnx,mch-plb-clk-period-ps = <0x2710>;
+			xlnx,mch-splb-awidth = <0x20>;
+			xlnx,mch0-accessbuf-depth = <0x10>;
+			xlnx,mch0-protocol = <0x0>;
+			xlnx,mch0-rddatabuf-depth = <0x10>;
+			xlnx,mch1-accessbuf-depth = <0x10>;
+			xlnx,mch1-protocol = <0x0>;
+			xlnx,mch1-rddatabuf-depth = <0x10>;
+			xlnx,mch2-accessbuf-depth = <0x10>;
+			xlnx,mch2-protocol = <0x0>;
+			xlnx,mch2-rddatabuf-depth = <0x10>;
+			xlnx,mch3-accessbuf-depth = <0x10>;
+			xlnx,mch3-protocol = <0x0>;
+			xlnx,mch3-rddatabuf-depth = <0x10>;
+			xlnx,mem0-width = <0x10>;
+			xlnx,mem1-width = <0x20>;
+			xlnx,mem2-width = <0x20>;
+			xlnx,mem3-width = <0x20>;
+			xlnx,num-banks-mem = <0x1>;
+			xlnx,num-channels = <0x2>;
+			xlnx,priority-mode = <0x0>;
+			xlnx,synch-mem-0 = <0x0>;
+			xlnx,synch-mem-1 = <0x0>;
+			xlnx,synch-mem-2 = <0x0>;
+			xlnx,synch-mem-3 = <0x0>;
+			xlnx,synch-pipedelay-0 = <0x2>;
+			xlnx,synch-pipedelay-1 = <0x2>;
+			xlnx,synch-pipedelay-2 = <0x2>;
+			xlnx,synch-pipedelay-3 = <0x2>;
+			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
+			xlnx,tavdv-ps-mem-1 = <0x3a98>;
+			xlnx,tavdv-ps-mem-2 = <0x3a98>;
+			xlnx,tavdv-ps-mem-3 = <0x3a98>;
+			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
+			xlnx,tcedv-ps-mem-1 = <0x3a98>;
+			xlnx,tcedv-ps-mem-2 = <0x3a98>;
+			xlnx,tcedv-ps-mem-3 = <0x3a98>;
+			xlnx,thzce-ps-mem-0 = <0x88b8>;
+			xlnx,thzce-ps-mem-1 = <0x1b58>;
+			xlnx,thzce-ps-mem-2 = <0x1b58>;
+			xlnx,thzce-ps-mem-3 = <0x1b58>;
+			xlnx,thzoe-ps-mem-0 = <0x1b58>;
+			xlnx,thzoe-ps-mem-1 = <0x1b58>;
+			xlnx,thzoe-ps-mem-2 = <0x1b58>;
+			xlnx,thzoe-ps-mem-3 = <0x1b58>;
+			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
+			xlnx,tlzwe-ps-mem-1 = <0x0>;
+			xlnx,tlzwe-ps-mem-2 = <0x0>;
+			xlnx,tlzwe-ps-mem-3 = <0x0>;
+			xlnx,twc-ps-mem-0 = <0x1adb0>;
+			xlnx,twc-ps-mem-1 = <0x3a98>;
+			xlnx,twc-ps-mem-2 = <0x3a98>;
+			xlnx,twc-ps-mem-3 = <0x3a98>;
+			xlnx,twp-ps-mem-0 = <0x11170>;
+			xlnx,twp-ps-mem-1 = <0x2ee0>;
+			xlnx,twp-ps-mem-2 = <0x2ee0>;
+			xlnx,twp-ps-mem-3 = <0x2ee0>;
+			xlnx,xcl0-linesize = <0x4>;
+			xlnx,xcl0-writexfer = <0x1>;
+			xlnx,xcl1-linesize = <0x4>;
+			xlnx,xcl1-writexfer = <0x1>;
+			xlnx,xcl2-linesize = <0x4>;
+			xlnx,xcl2-writexfer = <0x1>;
+			xlnx,xcl3-linesize = <0x4>;
+			xlnx,xcl3-writexfer = <0x1>;
+		} ;
+		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,compound";
+			ethernet@81c00000 {
+				compatible = "xlnx,xps-ll-temac-1.01.b";
+				device_type = "network";
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 8 2 >;
+				llink-connected = <&Hard_Ethernet_MAC_fifo>;
+				local-mac-address = [ 02 00 00 00 00 00 ];
+				reg = < 0x81c00000 0x40 >;
+				xlnx,bus2core-clk-ratio = <0x1>;
+				xlnx,phy-type = <0x3>;
+				xlnx,phyaddr = <0x1>;
+				xlnx,rxcsum = <0x0>;
+				xlnx,rxfifo = <0x8000>;
+				xlnx,temac-type = <0x0>;
+				xlnx,txcsum = <0x0>;
+				xlnx,txfifo = <0x8000>;
+			} ;
+		} ;
+		Hard_Ethernet_MAC_fifo: xps-ll-fifo@81a00000 {
+			compatible = "xlnx,xps-ll-fifo-1.01.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 6 2 >;
+			reg = < 0x81a00000 0x10000 >;
+			xlnx,family = "virtex5";
+		} ;
+		IIC_EEPROM: i2c@81600000 {
+			compatible = "xlnx,xps-iic-2.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 9 2 >;
+			reg = < 0x81600000 0x10000 >;
+			xlnx,clk-freq = <0x5f5e100>;
+			xlnx,family = "virtex5";
+			xlnx,gpo-width = <0x1>;
+			xlnx,iic-freq = <0x186a0>;
+			xlnx,scl-inertial-delay = <0x5>;
+			xlnx,sda-inertial-delay = <0x5>;
+			xlnx,ten-bit-adr = <0x0>;
+		} ;
+		LCD_OPTIONAL: gpio@81420000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			reg = < 0x81420000 0x10000 >;
+			xlnx,all-inputs = <0x0>;
+			xlnx,all-inputs-2 = <0x0>;
+			xlnx,dout-default = <0x0>;
+			xlnx,dout-default-2 = <0x0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <0xb>;
+			xlnx,interrupt-present = <0x0>;
+			xlnx,is-bidir = <0x1>;
+			xlnx,is-bidir-2 = <0x1>;
+			xlnx,is-dual = <0x0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		LEDs_4Bit: gpio@81400000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			reg = < 0x81400000 0x10000 >;
+			xlnx,all-inputs = <0x0>;
+			xlnx,all-inputs-2 = <0x0>;
+			xlnx,dout-default = <0x0>;
+			xlnx,dout-default-2 = <0x0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <0x4>;
+			xlnx,interrupt-present = <0x0>;
+			xlnx,is-bidir = <0x1>;
+			xlnx,is-bidir-2 = <0x1>;
+			xlnx,is-dual = <0x0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		RS232_Uart_1: serial@83e00000 {
+			clock-frequency = <100000000>;
+			compatible = "xlnx,xps-uart16550-2.00.b", "ns16550";
+			current-speed = <9600>;
+			device_type = "serial";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 11 2 >;
+			reg = < 0x83e00000 0x10000 >;
+			reg-offset = <0x1003>;
+			reg-shift = <2>;
+			xlnx,family = "virtex5";
+			xlnx,has-external-rclk = <0x0>;
+			xlnx,has-external-xin = <0x0>;
+			xlnx,is-a-16550 = <0x1>;
+		} ;
+		SPI_EEPROM: xps-spi@feff8000 {
+			compatible = "xlnx,xps-spi-2.00.b";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 10 2 >;
+			reg = < 0xfeff8000 0x80 >;
+			xlnx,family = "virtex5";
+			xlnx,fifo-exist = <0x1>;
+			xlnx,num-ss-bits = <0x1>;
+			xlnx,num-transfer-bits = <0x8>;
+			xlnx,sck-ratio = <0x80>;
+		} ;
+		SysACE_CompactFlash: sysace@83600000 {
+			compatible = "xlnx,xps-sysace-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 7 2 >;
+			reg = < 0x83600000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,mem-width = <0x10>;
+		} ;
+		plbv46_pci_0: plbv46-pci@85e00000 {
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "xlnx,plbv46-pci-1.03.a";
+			device_type = "pci";
+			reg = < 0x85e00000 0x10000 >;
+
+			/*
+			 * The default ML510 BSB has C_IPIFBAR2PCIBAR_0 set to
+			 * 0 which means that a read/write to the memory mapped
+			 * i/o region (which starts at 0xa0000000) for pci
+			 * bar 0 on the plb side translates to 0.
+			 * It is important to set this value to 0xa0000000, so
+			 * that inbound and outbound pci transactions work
+			 * properly including DMA.
+			 */
+			ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000
+				  0x01000000 0 0x00000000 0xf0000000 0 0x00010000>;
+
+			#interrupt-cells = <1>;
+			interrupt-parent = <&xps_intc_0>;
+			interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+			interrupt-map = <
+				/* IRQ mapping for pci slots and ALI M1533
+				 * periperhals. In total there are 5 interrupt
+				 * lines connected to a xps_intc controller.
+				 * Four of them are PCI IRQ A, B, C, D and
+				 * which correspond to respectively xpx_intc
+				 * 5, 4, 3 and 2.  The fifth interrupt line is
+				 * connected to the south bridge and this one
+				 * uses irq 1 and is active high instead of
+				 * active low.
+				 *
+				 * The M1533 contains various peripherals
+				 * including AC97 audio, a modem, USB, IDE and
+				 * some power management stuff. The modem
+				 * isn't connected on the ML510 and the power
+				 * management core also isn't used.
+				 */
+
+				/* IDSEL 0x16 / dev=6, bus=0 / PCI slot 3 */
+				0x3000 0 0 1 &xps_intc_0 3 2
+				0x3000 0 0 2 &xps_intc_0 2 2
+				0x3000 0 0 3 &xps_intc_0 5 2
+				0x3000 0 0 4 &xps_intc_0 4 2
+
+				/* IDSEL 0x13 / dev=3, bus=1 / PCI slot 4 */
+				/*
+				0x11800 0 0 1 &xps_intc_0 5 0 2
+				0x11800 0 0 2 &xps_intc_0 4 0 2
+				0x11800 0 0 3 &xps_intc_0 3 0 2
+				0x11800 0 0 4 &xps_intc_0 2 0 2
+				*/
+
+				/* According to the datasheet + schematic
+				 * ABCD [FPGA] of slot 5 is mapped to DABC.
+				 * Testing showed that at least A maps to B,
+				 * the mapping of the other pins is a guess
+				 * and for that reason the lines have been
+				 * commented out.
+				 */
+				/* IDSEL 0x15 / dev=5, bus=0 / PCI slot 5 */
+				0x2800 0 0 1 &xps_intc_0 4 2
+				/*
+				0x2800 0 0 2 &xps_intc_0 3 2
+				0x2800 0 0 3 &xps_intc_0 2 2
+				0x2800 0 0 4 &xps_intc_0 5 2
+				*/
+
+				/* IDSEL 0x12 / dev=2, bus=1 / PCI slot 6 */
+				/*
+				0x11000 0 0 1 &xps_intc_0 4 0 2
+				0x11000 0 0 2 &xps_intc_0 3 0 2
+				0x11000 0 0 3 &xps_intc_0 2 0 2
+				0x11000 0 0 4 &xps_intc_0 5 0 2
+				*/
+
+				/* IDSEL 0x11 / dev=1, bus=0 / AC97 audio */
+				0x0800 0 0 1 &i8259 7 2
+
+				/* IDSEL 0x1b / dev=11, bus=0 / IDE */
+				0x5800 0 0 1 &i8259 14 2
+
+				/* IDSEL 0x1f / dev 15, bus=0 / 2x USB 1.1 */
+				0x7800 0 0 1 &i8259 7 2
+			>;
+			ali_m1533 {
+				#size-cells = <1>;
+				#address-cells = <2>;
+				i8259: interrupt-controller@20 {
+					reg = <1 0x20 2
+							1 0xa0 2
+							1 0x4d0 2>;
+					interrupt-controller;
+					device_type = "interrupt-controller";
+					#address-cells = <0>;
+					#interrupt-cells = <2>;
+					compatible = "chrp,iic";
+
+					/* south bridge irq is active high */
+					interrupts = <1 3>;
+					interrupt-parent = <&xps_intc_0>;
+				};
+			};
+		} ;
+		xps_bram_if_cntlr_1: xps-bram-if-cntlr@ffff0000 {
+			compatible = "xlnx,xps-bram-if-cntlr-1.00.a";
+			reg = < 0xffff0000 0x10000 >;
+			xlnx,family = "virtex5";
+		} ;
+		xps_intc_0: interrupt-controller@81800000 {
+			#interrupt-cells = <0x2>;
+			compatible = "xlnx,xps-intc-1.00.a";
+			interrupt-controller ;
+			reg = < 0x81800000 0x10000 >;
+			xlnx,num-intr-inputs = <0xc>;
+		} ;
+		xps_tft_0: tft@86e00000 {
+			compatible = "xlnx,xps-tft-1.00.a";
+			reg = < 0x86e00000 0x10000 >;
+			xlnx,dcr-splb-slave-if = <0x1>;
+			xlnx,default-tft-base-addr = <0x0>;
+			xlnx,family = "virtex5";
+			xlnx,i2c-slave-addr = <0x76>;
+			xlnx,mplb-awidth = <0x20>;
+			xlnx,mplb-dwidth = <0x80>;
+			xlnx,mplb-native-dwidth = <0x40>;
+			xlnx,mplb-smallest-slave = <0x20>;
+			xlnx,tft-interface = <0x1>;
+		} ;
+	} ;
+}  ;
diff --git a/src/powerpc/walnut.dts b/src/powerpc/walnut.dts
new file mode 100644
index 000000000000..4a9f726ada13
--- /dev/null
+++ b/src/powerpc/walnut.dts
@@ -0,0 +1,246 @@
+/*
+ * Device Tree Source for IBM Walnut
+ *
+ * Copyright 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "ibm,walnut";
+	compatible = "ibm,walnut";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,405GP";
+			reg = <0x00000000>;
+			clock-frequency = <200000000>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>;
+			d-cache-size = <16384>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	plb {
+		compatible = "ibm,plb3";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: memory-controller {
+			compatible = "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL: mcmal {
+			compatible = "ibm,mcmal-405gp", "ibm,mcmal";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <1>;
+			num-rx-chans = <1>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <
+				0xb 0x4 /* TXEOB */
+				0xc 0x4 /* RXEOB */
+				0xa 0x4 /* SERR */
+				0xd 0x4 /* TXDE */
+				0xe 0x4 /* RXDE */>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-405gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xef600000 0xef600000 0x00a00000>;
+			dcr-reg = <0x0a0 0x005>;
+			clock-frequency = <0>; /* Filled in by zImage */
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				current-speed = <9600>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			UART1: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				current-speed = <9600>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC: i2c@ef600500 {
+				compatible = "ibm,iic-405gp", "ibm,iic";
+				reg = <0xef600500 0x00000011>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+
+			GPIO: gpio@ef600700 {
+				compatible = "ibm,gpio-405gp";
+				reg = <0xef600700 0x00000020>;
+			};
+
+			EMAC: ethernet@ef600800 {
+				device_type = "network";
+				compatible = "ibm,emac-405gp", "ibm,emac";
+				interrupt-parent = <&UIC0>;
+				interrupts = <
+					0xf 0x4 /* Ethernet */
+					0x9 0x4 /* Ethernet Wake Up */>;
+				local-mac-address = [000000000000]; /* Filled in by zImage */
+				reg = <0xef600800 0x00000070>;
+				mal-device = <&MAL>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rmii";
+				phy-map = <0x00000001>;
+			};
+
+		};
+
+		EBC0: ebc {
+			compatible = "ibm,ebc-405gp", "ibm,ebc";
+			dcr-reg = <0x012 0x002>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			/* The ranges property is supplied by the bootwrapper
+			 * and is based on the firmware's configuration of the
+			 * EBC bridge
+			 */
+			clock-frequency = <0>; /* Filled in by zImage */
+
+			sram@0,0 {
+				reg = <0x00000000 0x00000000 0x00080000>;
+			};
+
+			flash@0,80000 {
+				compatible = "jedec-flash";
+				bank-width = <1>;
+				reg = <0x00000000 0x00080000 0x00080000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				partition@0 {
+					label = "OpenBIOS";
+					reg = <0x00000000 0x00080000>;
+					read-only;
+				};
+			};
+
+			nvram@1,0 {
+				/* NVRAM and RTC */
+				compatible = "ds1743-nvram";
+				#bytes = <0x2000>;
+				reg = <0x00000001 0x00000000 0x00002000>;
+			};
+
+			keyboard@2,0 {
+				compatible = "intel,82C42PC";
+				reg = <0x00000002 0x00000000 0x00000002>;
+			};
+
+			ir@3,0 {
+				compatible = "ti,TIR2000PAG";
+				reg = <0x00000003 0x00000000 0x00000010>;
+			};
+
+			fpga@7,0 {
+				compatible = "Walnut-FPGA";
+				reg = <0x00000007 0x00000000 0x00000010>;
+				virtual-reg = <0xf0300005>;
+			};
+		};
+
+		PCI0: pci@ec000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb405gp-pci", "ibm,plb-pci";
+			primary;
+			reg = <0xeec00000 0x00000008	/* Config space access */
+			       0xeed80000 0x00000004	/* IACK */
+			       0xeed80000 0x00000004	/* Special cycle */
+			       0xef480000 0x00000040>;	/* Internal registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed. Chip supports a second
+			 * IO range but we don't use it for now
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
+				  0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* Walnut has all 4 IRQ pins tied together per slot */
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
+			interrupt-map = <
+				/* IDSEL 1 */
+				0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
+
+				/* IDSEL 2 */
+				0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8
+
+				/* IDSEL 3 */
+				0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8
+
+				/* IDSEL 4 */
+				0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8
+			>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600300";
+	};
+};
diff --git a/src/powerpc/warp.dts b/src/powerpc/warp.dts
new file mode 100644
index 000000000000..e576ee85c42f
--- /dev/null
+++ b/src/powerpc/warp.dts
@@ -0,0 +1,309 @@
+/*
+ * Device Tree Source for PIKA Warp
+ *
+ * Copyright (c) 2008-2009 PIKA Technologies
+ *   Sean MacLennan <smaclennan@pikatech.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "pika,warp";
+	compatible = "pika,warp";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440EP";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440ep";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440ep";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		DMA0: dma {
+			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
+			dcr-reg = <0x100 0x027>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+		};
+
+		POB0: opb {
+		  	compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		  	ranges = <0x00000000 0x00000000 0x00000000 0x80000000
+			          0x80000000 0x00000000 0x80000000 0x80000000>;
+		  	interrupt-parent = <&UIC1>;
+		  	interrupts = <0x7 0x4>;
+		  	clock-frequency = <0>; /* Filled in by zImage */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				interrupts = <0x5 0x1>;
+				interrupt-parent = <&UIC1>;
+
+				fpga@2,0 {
+					compatible = "pika,fpga";
+			   		reg = <0x00000002 0x00000000 0x00001000>;
+					interrupts = <0x18 0x8>;
+					interrupt-parent = <&UIC0>;
+				};
+
+				fpga@2,2000 {
+					compatible = "pika,fpga-sgl";
+			   		reg = <0x00000002 0x00002000 0x00000200>;
+				};
+
+				fpga@2,4000 {
+					compatible = "pika,fpga-sd";
+					reg = <0x00000002 0x00004000 0x00004000>;
+				};
+
+				nor@0,0 {
+					compatible = "amd,s29gl032a", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x00400000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "splash";
+						reg = <0x00000000 0x00010000>;
+					};
+					partition@300000 {
+						label = "fpga";
+						reg = <0x0300000 0x00040000>;
+					};
+					partition@340000 {
+						label = "env";
+						reg = <0x0340000 0x00040000>;
+					};
+					partition@380000 {
+						label = "u-boot";
+						reg = <0x0380000 0x00080000>;
+					};
+				};
+
+				ndfc@1,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000001 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "kernel";
+							reg = <0x00000000 0x00200000>;
+						};
+						partition@200000 {
+							label = "root";
+							reg = <0x00200000 0x03E00000>;
+						};
+						partition@40000000 {
+							label = "persistent";
+							reg = <0x04000000 0x04000000>;
+						};
+						partition@80000000 {
+							label = "persistent1";
+							reg = <0x08000000 0x04000000>;
+						};
+						partition@C0000000 {
+							label = "persistent2";
+							reg = <0x0C000000 0x04000000>;
+						};
+					};
+				};
+			};
+
+			UART0: serial@ef600300 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600300 0x00000008>;
+		   		virtual-reg = <0xef600300>;
+		   		clock-frequency = <0>; /* Filled in by zImage */
+		   		current-speed = <115200>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0x0 0x4>;
+	   		};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ad7414@4a {
+					compatible = "adi,ad7414";
+					reg = <0x4a>;
+					interrupts = <0x19 0x8>;
+					interrupt-parent = <&UIC0>;
+				};
+
+				/* This will create 52 and 53 */
+				at24@52 {
+					compatible = "at,24c04";
+					reg = <0x52>;
+				};
+			};
+
+			GPIO0: gpio@ef600b00 {
+				compatible = "ibm,ppc4xx-gpio";
+				reg = <0xef600b00 0x00000048>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+
+			GPIO1: gpio@ef600c00 {
+				compatible = "ibm,ppc4xx-gpio";
+				reg = <0xef600c00 0x00000048>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+
+			power-leds {
+				compatible = "gpio-leds";
+				green {
+					gpios = <&GPIO1 0 0>;
+					default-state = "keep";
+				};
+				red {
+					gpios = <&GPIO1 1 0>;
+					default-state = "keep";
+				};
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
+				reg = <0xef600d00 0x0000000c>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xef600e00 0x00000070>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0 1>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rmii";
+				phy-map = <0x00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <0>;
+			};
+
+			usb@ef601000 {
+				compatible = "ohci-be";
+				reg = <0xef601000 0x00000080>;
+				interrupts = <0x8 0x1 0x9 0x1>;
+				interrupt-parent = < &UIC1 >;
+			};
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600300";
+	};
+};
diff --git a/src/powerpc/wii.dts b/src/powerpc/wii.dts
new file mode 100644
index 000000000000..77528c9a8dbd
--- /dev/null
+++ b/src/powerpc/wii.dts
@@ -0,0 +1,218 @@
+/*
+ * arch/powerpc/boot/dts/wii.dts
+ *
+ * Nintendo Wii platform device tree source
+ * Copyright (C) 2008-2009 The GameCube Linux Team
+ * Copyright (C) 2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+/dts-v1/;
+
+/*
+ * This is commented-out for now.
+ * Until a later patch is merged, the kernel can use only the first
+ * contiguous RAM range and will BUG() if the memreserve is outside
+ * that range.
+ */
+/*/memreserve/ 0x10000000 0x0004000;*/	/* DSP RAM */
+
+/ {
+	model = "nintendo,wii";
+	compatible = "nintendo,wii";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		bootargs = "root=/dev/mmcblk0p2 rootwait udbg-immortal";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x01800000	/* MEM1 24MB 1T-SRAM */
+		       0x10000000 0x04000000>;	/* MEM2 64MB GDDR3 */
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,broadway@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <729000000>; /* 729MHz */
+			bus-frequency = <243000000>; /* 243MHz core-to-bus 3x */
+			timebase-frequency = <60750000>; /* 243MHz / 4 */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+		};
+	};
+
+	/* devices contained in the hollywood chipset */
+	hollywood {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "nintendo,hollywood";
+                ranges = <0x0c000000 0x0c000000 0x01000000
+			  0x0d000000 0x0d000000 0x00800000
+			  0x0d800000 0x0d800000 0x00800000>;
+		interrupt-parent = <&PIC0>;
+
+		video@0c002000 {
+			compatible = "nintendo,hollywood-vi",
+					"nintendo,flipper-vi";
+			reg = <0x0c002000 0x100>;
+			interrupts = <8>;
+		};
+
+		processor-interface@0c003000 {
+			compatible = "nintendo,hollywood-pi",
+					"nintendo,flipper-pi";
+			reg = <0x0c003000 0x100>;
+
+			PIC0: pic0 {
+				#interrupt-cells = <1>;
+				compatible = "nintendo,flipper-pic";
+				interrupt-controller;
+			};
+		};
+
+		dsp@0c005000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "nintendo,hollywood-dsp",
+					"nintendo,flipper-dsp";
+			reg = <0x0c005000 0x200>;
+			interrupts = <6>;
+		};
+
+		gamepad-controller@0d006400 {
+			compatible = "nintendo,hollywood-si",
+					"nintendo,flipper-si";
+			reg = <0x0d006400 0x100>;
+			interrupts = <3>;
+		};
+
+		audio@0c006c00 {
+			compatible = "nintendo,hollywood-ai",
+					"nintendo,flipper-ai";
+			reg = <0x0d006c00 0x20>;
+			interrupts = <6>;
+		};
+
+		/* External Interface bus */
+		exi@0d006800 {
+			compatible = "nintendo,hollywood-exi",
+					"nintendo,flipper-exi";
+			reg = <0x0d006800 0x40>;
+			virtual-reg = <0x0d006800>;
+			interrupts = <4>;
+		};
+
+		usb@0d040000 {
+			compatible = "nintendo,hollywood-usb-ehci",
+					"usb-ehci";
+			reg = <0x0d040000 0x100>;
+			interrupts = <4>;
+			interrupt-parent = <&PIC1>;
+		};
+
+		usb@0d050000 {
+			compatible = "nintendo,hollywood-usb-ohci",
+					"usb-ohci";
+			reg = <0x0d050000 0x100>;
+			interrupts = <5>;
+			interrupt-parent = <&PIC1>;
+		};
+
+		usb@0d060000 {
+			compatible = "nintendo,hollywood-usb-ohci",
+					"usb-ohci";
+			reg = <0x0d060000 0x100>;
+			interrupts = <6>;
+			interrupt-parent = <&PIC1>;
+		};
+
+		sd@0d070000 {
+			compatible = "nintendo,hollywood-sdhci",
+					"sdhci";
+			reg = <0x0d070000 0x200>;
+			interrupts = <7>;
+			interrupt-parent = <&PIC1>;
+		};
+
+		sdio@0d080000 {
+			compatible = "nintendo,hollywood-sdhci",
+					"sdhci";
+			reg = <0x0d080000 0x200>;
+			interrupts = <8>;
+			interrupt-parent = <&PIC1>;
+		};
+
+		ipc@0d000000 {
+			compatible = "nintendo,hollywood-ipc";
+			reg = <0x0d000000 0x10>;
+			interrupts = <30>;
+			interrupt-parent = <&PIC1>;
+		};
+
+		PIC1: pic1@0d800030 {
+			#interrupt-cells = <1>;
+			compatible = "nintendo,hollywood-pic";
+			reg = <0x0d800030 0x10>;
+			interrupt-controller;
+			interrupts = <14>;
+		};
+
+		GPIO: gpio@0d8000c0 {
+			#gpio-cells = <2>;
+			compatible = "nintendo,hollywood-gpio";
+			reg = <0x0d8000c0 0x40>;
+			gpio-controller;
+
+			/*
+			 * This is commented out while a standard binding
+			 * for i2c over gpio is defined.
+			 */
+			/*
+			i2c-video {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			        compatible = "i2c-gpio";
+
+			        gpios = <&GPIO 15 0
+			                 &GPIO 14 0>;
+			        clock-frequency = <250000>;
+				no-clock-stretching;
+			        scl-is-open-drain;
+			        sda-is-open-drain;
+			        sda-enforce-dir;
+
+			        AVE: audio-video-encoder@70 {
+			                compatible = "nintendo,wii-audio-video-encoder";
+			                reg = <0x70>;
+			        };
+			};
+			*/
+		};
+
+		control@0d800100 {
+			compatible = "nintendo,hollywood-control";
+			reg = <0x0d800100 0x300>;
+		};
+
+		disk@0d806000 {
+			compatible = "nintendo,hollywood-di";
+			reg = <0x0d806000 0x40>;
+			interrupts = <2>;
+		};
+	};
+};
+
diff --git a/src/powerpc/xcalibur1501.dts b/src/powerpc/xcalibur1501.dts
new file mode 100644
index 000000000000..1f2952dce77d
--- /dev/null
+++ b/src/powerpc/xcalibur1501.dts
@@ -0,0 +1,696 @@
+/*
+ * Copyright (C) 2008 Extreme Engineering Solutions, Inc.
+ * Based on MPC8572DS device tree from Freescale Semiconductor, Inc.
+ *
+ * XCalibur1501 6U CompactPCI single-board computer based on MPC8572E
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/ {
+	model = "xes,xcalibur1501";
+	compatible = "xes,xcalibur1501", "xes,MPC8572";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8572@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,8572@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>;	// Filled in by U-Boot
+	};
+
+	localbus@ef005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xef005000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+		/* Local bus region mappings */
+		ranges = <0 0 0 0xf8000000 0x8000000  /* CS0: Flash 1 */
+			  1 0 0 0xf0000000 0x8000000  /* CS1: Flash 2 */
+			  2 0 0 0xef800000 0x40000    /* CS2: NAND CE1 */
+			  3 0 0 0xef840000 0x40000    /* CS3: NAND CE2 */
+			  4 0 0 0xe9000000 0x100000>; /* CS4: USB */
+
+		nor-boot@0,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			bank-width = <2>;
+			reg = <0 0 0x8000000>; /* 128MB */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "Primary user space";
+				reg = <0x00000000 0x6f00000>; /* 111 MB */
+			};
+			partition@6f00000 {
+				label = "Primary kernel";
+				reg = <0x6f00000 0x1000000>; /* 16 MB */
+			};
+			partition@7f00000 {
+				label = "Primary DTB";
+				reg = <0x7f00000 0x40000>; /* 256 KB */
+			};
+			partition@7f40000 {
+				label = "Primary U-Boot environment";
+				reg = <0x7f40000 0x40000>; /* 256 KB */
+			};
+			partition@7f80000 {
+				label = "Primary U-Boot";
+				reg = <0x7f80000 0x80000>; /* 512 KB */
+				read-only;
+			};
+		};
+
+		nor-alternate@1,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			bank-width = <2>;
+			//reg = <0xf0000000 0x08000000>; /* 128MB */
+			reg = <1 0 0x8000000>; /* 128MB */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "Secondary user space";
+				reg = <0x00000000 0x6f00000>; /* 111 MB */
+			};
+			partition@6f00000 {
+				label = "Secondary kernel";
+				reg = <0x6f00000 0x1000000>; /* 16 MB */
+			};
+			partition@7f00000 {
+				label = "Secondary DTB";
+				reg = <0x7f00000 0x40000>; /* 256 KB */
+			};
+			partition@7f40000 {
+				label = "Secondary U-Boot environment";
+				reg = <0x7f40000 0x40000>; /* 256 KB */
+			};
+			partition@7f80000 {
+				label = "Secondary U-Boot";
+				reg = <0x7f80000 0x80000>; /* 512 KB */
+				read-only;
+			};
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/*
+			 * Actual part could be ST Micro NAND08GW3B2A (1 GB),
+			 * Micron MT29F8G08DAA (2x 512 MB), or Micron
+			 * MT29F16G08FAA (2x 1 GB), depending on the build
+			 * configuration
+			 */
+			compatible = "fsl,mpc8572-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <2 0 0x40000>;
+			/* U-Boot should fix this up if chip size > 1 GB */
+			partition@0 {
+				label = "NAND Filesystem";
+				reg = <0 0x40000000>;
+			};
+		};
+
+		usb@4,0 {
+			compatible = "nxp,usb-isp1761";
+			reg = <4 0 0x100000>;
+			bus-width = <32>;
+			interrupt-parent = <&mpic>;
+			interrupts = <10 1>;
+		};
+	};
+
+	soc8572@ef000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8572-immr", "simple-bus";
+		ranges = <0x0 0 0xef000000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8572-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		memory-controller@6000 {
+			compatible = "fsl,mpc8572-memory-controller";
+			reg = <0x6000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8572-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x100000>; // L2, 1M
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			temp-sensor@48 {
+				compatible = "dallas,ds1631", "dallas,ds1621";
+				reg = <0x48>;
+			};
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			cpu-supervisor@51 {
+				compatible = "dallas,ds4510";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,at24c128b";
+				reg = <0x54>;
+			};
+
+			rtc@68 {
+				compatible = "st,m41t00",
+				             "dallas,ds1338";
+				reg = <0x68>;
+			};
+
+			pcie-switch@6a {
+				compatible = "plx,pex8648";
+				reg = <0x6a>;
+			};
+
+			/* On-board signals for VID, flash, serial */
+			gpio1: gpio@18 {
+				compatible = "nxp,pca9557";
+				reg = <0x18>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			/* PMC0/XMC0 signals */
+			gpio2: gpio@1c {
+				compatible = "nxp,pca9557";
+				reg = <0x1c>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			/* PMC1/XMC1 signals */
+			gpio3: gpio@1d {
+				compatible = "nxp,pca9557";
+				reg = <0x1d>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			/* CompactPCI signals (sysen, GA[4:0]) */
+			gpio4: gpio@1e {
+				compatible = "nxp,pca9557";
+				reg = <0x1e>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			/* CompactPCI J5 GPIO and FAL/DEG/PRST */
+			gpio5: gpio@1f {
+				compatible = "nxp,pca9557";
+				reg = <0x1f>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		/* eTSEC 1 front panel 0 */
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <4 1>;
+					reg = <0x1>;
+				};
+				phy1: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <4 1>;
+					reg = <0x2>;
+				};
+				phy2: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x3>;
+				};
+				phy3: ethernet-phy@4 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x4>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC 2 front panel 1 */
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC 3 PICMG2.16 backplane port 0 */
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC 4 PICMG2.16 backplane port 1 */
+		enet3: ethernet@27000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <3>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			ranges = <0x0 0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi3>;
+			phy-handle = <&phy3>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi3: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* UART0 */
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		/* UART1 */
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,mpc8572-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		gpio0: gpio@f000 {
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x1000>;
+			interrupts = <47 2>;
+			interrupt-parent = <&mpic>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&gpio0 4 1>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			yellow {
+				label = "Yellow";
+				gpios = <&gpio0 5 1>;
+			};
+
+			red {
+				label = "Red";
+				gpios = <&gpio0 6 1>;
+			};
+
+			green {
+				label = "Green";
+				gpios = <&gpio0 7 1>;
+			};
+		};
+
+		/* PME (pattern-matcher) */
+		pme@10000 {
+			compatible = "fsl,mpc8572-pme", "pme8572";
+			reg = <0x10000 0x5000>;
+			interrupts = <57 2 64 2 65 2 66 2 67 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		tlu@2f000 {
+			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+			reg = <0x2f000 0x1000>;
+			interrupts = <61 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		tlu@15000 {
+			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+			reg = <0x15000 0x1000>;
+			interrupts = <75 2>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	/*
+	 * PCI Express controller 3 @ ef008000 is not used.
+	 * This would have been pci0 on other mpc85xx platforms.
+	 *
+	 * PCI Express controller 2 @ ef009000 is not used.
+	 * This would have been pci1 on other mpc85xx platforms.
+	 */
+
+	/* PCI Express controller 1, wired to PEX8648 PCIe switch */
+	pci2: pcie@ef00a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xef00a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000
+			  0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x0 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x0 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x0 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x40000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
diff --git a/src/powerpc/xpedite5200.dts b/src/powerpc/xpedite5200.dts
new file mode 100644
index 000000000000..5b10e56a1d8e
--- /dev/null
+++ b/src/powerpc/xpedite5200.dts
@@ -0,0 +1,468 @@
+/*
+ * Copyright (C) 2009 Extreme Engineering Solutions, Inc.
+ * Based on TQM8548 device tree
+ *
+ * XPedite5200 PrPMC/XMC module based on MPC8548E
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "xes,xpedite5200";
+	compatible = "xes,xpedite5200", "xes,MPC8548";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;	// Filled in by U-Boot
+	};
+
+	soc@ef000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xef000000 0x100000>;
+		bus-frequency = <0>;
+		compatible = "fsl,mpc8548-immr", "simple-bus";
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8548-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8548-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		/* On-card I2C */
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			/*
+			 * Board GPIO:
+			 * 	0: BRD_CFG0 (1: P14 IO present)
+			 * 	1: BRD_CFG1 (1: FP ethernet present)
+			 * 	2: BRD_CFG2 (1: XMC IO present)
+			 * 	3: XMC root complex indicator
+			 * 	4: Flash boot device indicator
+			 * 	5: Flash write protect enable
+			 * 	6: PMC monarch indicator
+			 * 	7: PMC EREADY
+			 */
+			gpio1: gpio@18 {
+				compatible = "nxp,pca9556";
+				reg = <0x18>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			/* P14 GPIO */
+			gpio2: gpio@19 {
+				compatible = "nxp,pca9556";
+				reg = <0x19>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,at24c16";
+				reg = <0x50>;
+			};
+
+			rtc@68 {
+				compatible = "st,m41t00",
+					     "dallas,ds1338";
+				reg = <0x68>;
+			};
+
+			dtt@48 {
+				compatible = "maxim,max1237";
+				reg = <0x34>;
+			};
+		};
+
+		/* Off-card I2C */
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		/* eTSEC1: Front panel port 0 */
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x1>;
+				};
+				phy1: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x2>;
+				};
+				phy2: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x3>;
+				};
+				phy3: ethernet-phy@4 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x4>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC2: Front panel port 1 */
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC3: Rear panel port 2 */
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC4: Rear panel port 3 */
+		enet3: ethernet@27000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <3>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			ranges = <0x0 0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi3>;
+			phy-handle = <&phy3>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi3: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	// global utilities reg
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+	localbus@ef005000 {
+		compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xef005000 0x100>;	// BRx, ORx, etc.
+		interrupt-parent = <&mpic>;
+		interrupts = <19 2>;
+
+		ranges = <
+			0 0x0 0xfc000000 0x04000000	// NOR boot flash
+			1 0x0 0xf8000000 0x04000000	// NOR expansion flash
+			2 0x0 0xef800000 0x00010000	// NAND CE1
+			3 0x0 0xef840000 0x00010000	// NAND CE2
+		>;
+
+		nor-boot@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0 0x0 0x4000000>;
+			bank-width = <2>;
+
+			partition@0 {
+				label = "Primary OS";
+				reg = <0x00000000 0x180000>;
+			};
+			partition@180000 {
+				label = "Secondary OS";
+				reg = <0x00180000 0x180000>;
+			};
+			partition@300000 {
+				label = "User";
+				reg = <0x00300000 0x3c80000>;
+			};
+			partition@3f80000 {
+				label = "Boot firmware";
+				reg = <0x03f80000 0x80000>;
+			};
+		};
+
+		nor-alternate@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x4000000>;
+			bank-width = <2>;
+
+			partition@0 {
+				label = "Filesystem";
+				reg = <0x00000000 0x3f80000>;
+			};
+			partition@3f80000 {
+				label = "Alternate boot firmware";
+				reg = <0x03f80000 0x80000>;
+			};
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xes,address-ctl-nand";
+			reg = <2 0x0 0x10000>;
+			cle-line = <0x8>;	/* CLE tied to A3 */
+			ale-line = <0x10>;	/* ALE tied to A4 */
+
+			/* U-Boot should fix this up */
+			partition@0 {
+				label = "NAND Filesystem";
+				reg = <0 0x40000000>;
+			};
+		};
+	};
+
+	/* PMC interface */
+	pci0: pci@ef008000 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xef008000 0x1000>;
+		clock-frequency = <33333333>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x40000000
+			  0x01000000 0 0x00000000 0xe8000000 0 0x00800000>;
+	};
+
+	/* XMC PCIe is not yet enabled in U-Boot on XPedite5200 */
+};
diff --git a/src/powerpc/xpedite5200_xmon.dts b/src/powerpc/xpedite5200_xmon.dts
new file mode 100644
index 000000000000..646acfbef0dd
--- /dev/null
+++ b/src/powerpc/xpedite5200_xmon.dts
@@ -0,0 +1,508 @@
+/*
+ * Copyright (C) 2009 Extreme Engineering Solutions, Inc.
+ * Based on TQM8548 device tree
+ *
+ * XPedite5200 PrPMC/XMC module based on MPC8548E.  This dts is for the
+ * xMon boot loader memory map which differs from U-Boot's.
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "xes,xpedite5200";
+	compatible = "xes,xpedite5200", "xes,MPC8548";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	form-factor = "PMC/XMC";
+	boot-bank = <0x0>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;	// Filled in by boot loader
+	};
+
+	soc@ef000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xef000000 0x100000>;
+		bus-frequency = <0>;
+		compatible = "fsl,mpc8548-immr", "simple-bus";
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8548-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8548-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		/* On-card I2C */
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			/*
+			 * Board GPIO:
+			 * 	0: BRD_CFG0 (1: P14 IO present)
+			 * 	1: BRD_CFG1 (1: FP ethernet present)
+			 * 	2: BRD_CFG2 (1: XMC IO present)
+			 * 	3: XMC root complex indicator
+			 * 	4: Flash boot device indicator
+			 * 	5: Flash write protect enable
+			 * 	6: PMC monarch indicator
+			 * 	7: PMC EREADY
+			 */
+			gpio1: gpio@18 {
+				compatible = "nxp,pca9556";
+				reg = <0x18>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			/* P14 GPIO */
+			gpio2: gpio@19 {
+				compatible = "nxp,pca9556";
+				reg = <0x19>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,at24c16";
+				reg = <0x50>;
+			};
+
+			rtc@68 {
+				compatible = "st,m41t00",
+					     "dallas,ds1338";
+				reg = <0x68>;
+			};
+
+			dtt@48 {
+				compatible = "maxim,max1237";
+				reg = <0x34>;
+			};
+		};
+
+		/* Off-card I2C */
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		/* eTSEC1: Front panel port 0 */
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x1>;
+				};
+				phy1: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x2>;
+				};
+				phy2: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x3>;
+				};
+				phy3: ethernet-phy@4 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x4>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC2: Front panel port 1 */
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC3: Rear panel port 2 */
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC4: Rear panel port 3 */
+		enet3: ethernet@27000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <3>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			ranges = <0x0 0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi3>;
+			phy-handle = <&phy3>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi3: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			current-speed = <9600>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			current-speed = <9600>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	// global utilities reg
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+	localbus@ef005000 {
+		compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xef005000 0x100>;	// BRx, ORx, etc.
+		interrupt-parent = <&mpic>;
+		interrupts = <19 2>;
+
+		ranges = <
+			0 0x0 0xf8000000 0x08000000	// NOR boot flash
+			1 0x0 0xf0000000 0x08000000	// NOR expansion flash
+			2 0x0 0xe8000000 0x00010000	// NAND CE1
+			3 0x0 0xe8010000 0x00010000	// NAND CE2
+		>;
+
+		nor-boot@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0 0x0 0x4000000>;
+			bank-width = <2>;
+
+			partition@0 {
+				label = "Primary OS";
+				reg = <0x00000000 0x180000>;
+			};
+			partition@180000 {
+				label = "Secondary OS";
+				reg = <0x00180000 0x180000>;
+			};
+			partition@300000 {
+				label = "User";
+				reg = <0x00300000 0x3c80000>;
+			};
+			partition@3f80000 {
+				label = "Boot firmware";
+				reg = <0x03f80000 0x80000>;
+			};
+		};
+
+		nor-alternate@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x4000000>;
+			bank-width = <2>;
+
+			partition@0 {
+				label = "Filesystem";
+				reg = <0x00000000 0x3f80000>;
+			};
+			partition@3f80000 {
+				label = "Alternate boot firmware";
+				reg = <0x03f80000 0x80000>;
+			};
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xes,address-ctl-nand";
+			reg = <2 0x0 0x10000>;
+			cle-line = <0x8>;	/* CLE tied to A3 */
+			ale-line = <0x10>;	/* ALE tied to A4 */
+
+			partition@0 {
+				label = "NAND Filesystem";
+				reg = <0 0x40000000>;
+			};
+		};
+	};
+
+	/* PMC interface */
+	pci0: pci@ef008000 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xef008000 0x1000>;
+		clock-frequency = <33333333>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xd0000000 0 0x01000000>;
+	};
+
+	/* XMC PCIe */
+	pci1: pcie@ef00a000 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x00000 0 0 1 &mpic 0 1
+			0x00000 0 0 2 &mpic 1 1
+			0x00000 0 0 3 &mpic 2 1
+			0x00000 0 0 4 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xd1000000 0 0x01000000>;
+		clock-frequency = <33333333>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xef00a000 0x1000>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xc0000000 0x02000000 0
+			          0xc0000000 0 0x20000000
+				  0x01000000 0 0x00000000 0x01000000 0
+				  0x00000000 0 0x08000000>;
+		};
+	};
+
+	/* Needed for dtbImage boot wrapper compatibility */
+	chosen {
+		linux,stdout-path = &serial0;
+	};
+};
diff --git a/src/powerpc/xpedite5301.dts b/src/powerpc/xpedite5301.dts
new file mode 100644
index 000000000000..7bcc94ffe53d
--- /dev/null
+++ b/src/powerpc/xpedite5301.dts
@@ -0,0 +1,640 @@
+/*
+ * Copyright (C) 2008 Extreme Engineering Solutions, Inc.
+ * Based on MPC8572DS device tree from Freescale Semiconductor, Inc.
+ *
+ * XPedite5301 PMC/XMC module based on MPC8572E
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/ {
+	model = "xes,xpedite5301";
+	compatible = "xes,xpedite5301", "xes,MPC8572";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	form-factor = "PMC/XMC";
+	boot-bank = <0x0>;	/* 0: Primary flash, 1: Secondary flash */
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8572@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,8572@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>;	// Filled in by U-Boot
+	};
+
+	localbus@ef005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xef005000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+		/* Local bus region mappings */
+		ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */
+			  1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */
+			  2 0 0 0xef800000 0x40000   /* CS2: NAND CE1 */
+			  3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */
+
+		nor-boot@0,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			bank-width = <2>;
+			reg = <0 0 0x8000000>; /* 128MB */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "Primary user space";
+				reg = <0x00000000 0x6f00000>; /* 111 MB */
+			};
+			partition@6f00000 {
+				label = "Primary kernel";
+				reg = <0x6f00000 0x1000000>; /* 16 MB */
+			};
+			partition@7f00000 {
+				label = "Primary DTB";
+				reg = <0x7f00000 0x40000>; /* 256 KB */
+			};
+			partition@7f40000 {
+				label = "Primary U-Boot environment";
+				reg = <0x7f40000 0x40000>; /* 256 KB */
+			};
+			partition@7f80000 {
+				label = "Primary U-Boot";
+				reg = <0x7f80000 0x80000>; /* 512 KB */
+				read-only;
+			};
+		};
+
+		nor-alternate@1,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			bank-width = <2>;
+			//reg = <0xf0000000 0x08000000>; /* 128MB */
+			reg = <1 0 0x8000000>; /* 128MB */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "Secondary user space";
+				reg = <0x00000000 0x6f00000>; /* 111 MB */
+			};
+			partition@6f00000 {
+				label = "Secondary kernel";
+				reg = <0x6f00000 0x1000000>; /* 16 MB */
+			};
+			partition@7f00000 {
+				label = "Secondary DTB";
+				reg = <0x7f00000 0x40000>; /* 256 KB */
+			};
+			partition@7f40000 {
+				label = "Secondary U-Boot environment";
+				reg = <0x7f40000 0x40000>; /* 256 KB */
+			};
+			partition@7f80000 {
+				label = "Secondary U-Boot";
+				reg = <0x7f80000 0x80000>; /* 512 KB */
+				read-only;
+			};
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/*
+			 * Actual part could be ST Micro NAND08GW3B2A (1 GB),
+			 * Micron MT29F8G08DAA (2x 512 MB), or Micron
+			 * MT29F16G08FAA (2x 1 GB), depending on the build
+			 * configuration
+			 */
+			compatible = "fsl,mpc8572-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <2 0 0x40000>;
+			/* U-Boot should fix this up if chip size > 1 GB */
+			partition@0 {
+				label = "NAND Filesystem";
+				reg = <0 0x40000000>;
+			};
+		};
+
+	};
+
+	soc8572@ef000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8572-immr", "simple-bus";
+		ranges = <0x0 0 0xef000000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8572-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		memory-controller@6000 {
+			compatible = "fsl,mpc8572-memory-controller";
+			reg = <0x6000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8572-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x100000>; // L2, 1M
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			temp-sensor@48 {
+				compatible = "dallas,ds1631", "dallas,ds1621";
+				reg = <0x48>;
+			};
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			cpu-supervisor@51 {
+				compatible = "dallas,ds4510";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,at24c128b";
+				reg = <0x54>;
+			};
+
+			rtc@68 {
+				compatible = "st,m41t00",
+				             "dallas,ds1338";
+				reg = <0x68>;
+			};
+
+			pcie-switch@70 {
+				compatible = "plx,pex8518";
+				reg = <0x70>;
+			};
+
+			gpio1: gpio@18 {
+				compatible = "nxp,pca9557";
+				reg = <0x18>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio2: gpio@1c {
+				compatible = "nxp,pca9557";
+				reg = <0x1c>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio3: gpio@1e {
+				compatible = "nxp,pca9557";
+				reg = <0x1e>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio4: gpio@1f {
+				compatible = "nxp,pca9557";
+				reg = <0x1f>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		/* eTSEC 1 */
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x1>;
+				};
+				phy1: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x2>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC 2 */
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* UART0 */
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		/* UART1 */
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,mpc8572-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		gpio0: gpio@f000 {
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x1000>;
+			interrupts = <47 2>;
+			interrupt-parent = <&mpic>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&gpio0 4 1>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			yellow {
+				label = "Yellow";
+				gpios = <&gpio0 5 1>;
+			};
+
+			red {
+				label = "Red";
+				gpios = <&gpio0 6 1>;
+			};
+
+			green {
+				label = "Green";
+				gpios = <&gpio0 7 1>;
+			};
+		};
+
+		/* PME (pattern-matcher) */
+		pme@10000 {
+			compatible = "fsl,mpc8572-pme", "pme8572";
+			reg = <0x10000 0x5000>;
+			interrupts = <57 2 64 2 65 2 66 2 67 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		tlu@2f000 {
+			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+			reg = <0x2f000 0x1000>;
+			interrupts = <61 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		tlu@15000 {
+			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+			reg = <0x15000 0x1000>;
+			interrupts = <75 2>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	/*
+	 * PCI Express controller 3 @ ef008000 is not used.
+	 * This would have been pci0 on other mpc85xx platforms.
+	 */
+
+	/* PCI Express controller 2, wired to XMC P15 connector */
+	pci1: pcie@ef009000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xef009000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0 0x0 0x0 0x1 &mpic 0x4 0x1
+			0x0 0x0 0x0 0x2 &mpic 0x5 0x1
+			0x0 0x0 0x0 0x3 &mpic 0x6 0x1
+			0x0 0x0 0x0 0x4 &mpic 0x7 0x1
+			>;
+		pcie@0 {
+			reg = <0x00000000 0x00000000 0x00000000 0x00000000 0x00000000>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x10000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	/* PCI Express controller 1, wired to PEX8112 for PMC interface */
+	pci2: pcie@ef00a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xef00a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000
+			  0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x0 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x0 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x0 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x40000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
diff --git a/src/powerpc/xpedite5330.dts b/src/powerpc/xpedite5330.dts
new file mode 100644
index 000000000000..86df8bc6ebbd
--- /dev/null
+++ b/src/powerpc/xpedite5330.dts
@@ -0,0 +1,707 @@
+/*
+ * Copyright (C) 2008 Extreme Engineering Solutions, Inc.
+ * Based on MPC8572DS device tree from Freescale Semiconductor, Inc.
+ *
+ * XPedite5330 3U CompactPCI module based on MPC8572E
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/ {
+	model = "xes,xpedite5330";
+	compatible = "xes,xpedite5330", "xes,MPC8572";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	form-factor = "3U CompactPCI";
+	boot-bank = <0x0>;	/* 0: Primary flash, 1: Secondary flash */
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	pmcslots {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmcslot@0 {
+			cell-index = <0>;
+			/*
+			 * boolean properties (true if defined):
+			 *     monarch;
+			 *     module-present;
+			 */
+		};
+	};
+
+	xmcslots {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		xmcslot@0 {
+			cell-index = <0>;
+			/*
+			 * boolean properties (true if defined):
+			 *     module-present;
+			 */
+		};
+	};
+
+	cpci {
+		/*
+		 * boolean properties (true if defined):
+		 *     system-controller;
+		 */
+		system-controller;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8572@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,8572@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>;	// Filled in by U-Boot
+	};
+
+	localbus@ef005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xef005000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+		/* Local bus region mappings */
+		ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */
+			  1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */
+			  2 0 0 0xef800000 0x40000   /* CS2: NAND CE1 */
+			  3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */
+
+		nor-boot@0,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			bank-width = <2>;
+			reg = <0 0 0x8000000>; /* 128MB */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "Primary user space";
+				reg = <0x00000000 0x6f00000>; /* 111 MB */
+			};
+			partition@6f00000 {
+				label = "Primary kernel";
+				reg = <0x6f00000 0x1000000>; /* 16 MB */
+			};
+			partition@7f00000 {
+				label = "Primary DTB";
+				reg = <0x7f00000 0x40000>; /* 256 KB */
+			};
+			partition@7f40000 {
+				label = "Primary U-Boot environment";
+				reg = <0x7f40000 0x40000>; /* 256 KB */
+			};
+			partition@7f80000 {
+				label = "Primary U-Boot";
+				reg = <0x7f80000 0x80000>; /* 512 KB */
+				read-only;
+			};
+		};
+
+		nor-alternate@1,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			bank-width = <2>;
+			//reg = <0xf0000000 0x08000000>; /* 128MB */
+			reg = <1 0 0x8000000>; /* 128MB */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "Secondary user space";
+				reg = <0x00000000 0x6f00000>; /* 111 MB */
+			};
+			partition@6f00000 {
+				label = "Secondary kernel";
+				reg = <0x6f00000 0x1000000>; /* 16 MB */
+			};
+			partition@7f00000 {
+				label = "Secondary DTB";
+				reg = <0x7f00000 0x40000>; /* 256 KB */
+			};
+			partition@7f40000 {
+				label = "Secondary U-Boot environment";
+				reg = <0x7f40000 0x40000>; /* 256 KB */
+			};
+			partition@7f80000 {
+				label = "Secondary U-Boot";
+				reg = <0x7f80000 0x80000>; /* 512 KB */
+				read-only;
+			};
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/*
+			 * Actual part could be ST Micro NAND08GW3B2A (1 GB),
+			 * Micron MT29F8G08DAA (2x 512 MB), or Micron
+			 * MT29F16G08FAA (2x 1 GB), depending on the build
+			 * configuration
+			 */
+			compatible = "fsl,mpc8572-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <2 0 0x40000>;
+			/* U-Boot should fix this up if chip size > 1 GB */
+			partition@0 {
+				label = "NAND Filesystem";
+				reg = <0 0x40000000>;
+			};
+		};
+
+	};
+
+	soc8572@ef000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8572-immr", "simple-bus";
+		ranges = <0x0 0 0xef000000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8572-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		memory-controller@6000 {
+			compatible = "fsl,mpc8572-memory-controller";
+			reg = <0x6000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8572-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x100000>; // L2, 1M
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			temp-sensor@48 {
+				compatible = "dallas,ds1631", "dallas,ds1621";
+				reg = <0x48>;
+			};
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			cpu-supervisor@51 {
+				compatible = "dallas,ds4510";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,at24c128b";
+				reg = <0x54>;
+			};
+
+			rtc@68 {
+				compatible = "st,m41t00",
+				             "dallas,ds1338";
+				reg = <0x68>;
+			};
+
+			pcie-switch@70 {
+				compatible = "plx,pex8518";
+				reg = <0x70>;
+			};
+
+			gpio1: gpio@18 {
+				compatible = "nxp,pca9557";
+				reg = <0x18>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio2: gpio@1c {
+				compatible = "nxp,pca9557";
+				reg = <0x1c>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio3: gpio@1e {
+				compatible = "nxp,pca9557";
+				reg = <0x1e>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio4: gpio@1f {
+				compatible = "nxp,pca9557";
+				reg = <0x1f>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		/* eTSEC 1 */
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x1>;
+				};
+				phy1: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x2>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC 2 */
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* UART0 */
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		/* UART1 */
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,mpc8572-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		gpio0: gpio@f000 {
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x1000>;
+			interrupts = <47 2>;
+			interrupt-parent = <&mpic>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&gpio0 4 1>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			yellow {
+				label = "Yellow";
+				gpios = <&gpio0 5 1>;
+			};
+
+			red {
+				label = "Red";
+				gpios = <&gpio0 6 1>;
+			};
+
+			green {
+				label = "Green";
+				gpios = <&gpio0 7 1>;
+			};
+		};
+
+		/* PME (pattern-matcher) */
+		pme@10000 {
+			compatible = "fsl,mpc8572-pme", "pme8572";
+			reg = <0x10000 0x5000>;
+			interrupts = <57 2 64 2 65 2 66 2 67 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		tlu@2f000 {
+			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+			reg = <0x2f000 0x1000>;
+			interrupts = <61 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		tlu@15000 {
+			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+			reg = <0x15000 0x1000>;
+			interrupts = <75 2>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	/* PCI Express controller 3 - CompactPCI bus via PEX8112 bridge */
+	pci0: pcie@ef008000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xef008000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe9000000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+		interrupt-map = <
+			0x0 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x0 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x0 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x0 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0xe0000000
+				  0x02000000 0x0 0xe0000000
+				  0x0 0x10000000
+
+				  0x01000000 0x0 0x0
+				  0x01000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	/* PCI Express controller 2, PMC module via PEX8112 bridge */
+	pci1: pcie@ef009000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xef009000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0 0x0 0x0 0x1 &mpic 0x4 0x1
+			0x0 0x0 0x0 0x2 &mpic 0x5 0x1
+			0x0 0x0 0x0 0x3 &mpic 0x6 0x1
+			0x0 0x0 0x0 0x4 &mpic 0x7 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x10000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	/* PCI Express controller 1, XMC P15 */
+	pci2: pcie@ef00a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xef00a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000
+			  0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x0 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x0 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x0 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x40000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
diff --git a/src/powerpc/xpedite5370.dts b/src/powerpc/xpedite5370.dts
new file mode 100644
index 000000000000..b8ade094f932
--- /dev/null
+++ b/src/powerpc/xpedite5370.dts
@@ -0,0 +1,638 @@
+/*
+ * Copyright (C) 2008 Extreme Engineering Solutions, Inc.
+ * Based on MPC8572DS device tree from Freescale Semiconductor, Inc.
+ *
+ * XPedite5370 3U VPX single-board computer based on MPC8572E
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/ {
+	model = "xes,xpedite5370";
+	compatible = "xes,xpedite5370", "xes,MPC8572";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8572@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,8572@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>;	// Filled in by U-Boot
+	};
+
+	localbus@ef005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xef005000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+		/* Local bus region mappings */
+		ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */
+			  1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */
+			  2 0 0 0xef800000 0x40000   /* CS2: NAND CE1 */
+			  3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */
+
+		nor-boot@0,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			bank-width = <2>;
+			reg = <0 0 0x8000000>; /* 128MB */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "Primary user space";
+				reg = <0x00000000 0x6f00000>; /* 111 MB */
+			};
+			partition@6f00000 {
+				label = "Primary kernel";
+				reg = <0x6f00000 0x1000000>; /* 16 MB */
+			};
+			partition@7f00000 {
+				label = "Primary DTB";
+				reg = <0x7f00000 0x40000>; /* 256 KB */
+			};
+			partition@7f40000 {
+				label = "Primary U-Boot environment";
+				reg = <0x7f40000 0x40000>; /* 256 KB */
+			};
+			partition@7f80000 {
+				label = "Primary U-Boot";
+				reg = <0x7f80000 0x80000>; /* 512 KB */
+				read-only;
+			};
+		};
+
+		nor-alternate@1,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			bank-width = <2>;
+			//reg = <0xf0000000 0x08000000>; /* 128MB */
+			reg = <1 0 0x8000000>; /* 128MB */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "Secondary user space";
+				reg = <0x00000000 0x6f00000>; /* 111 MB */
+			};
+			partition@6f00000 {
+				label = "Secondary kernel";
+				reg = <0x6f00000 0x1000000>; /* 16 MB */
+			};
+			partition@7f00000 {
+				label = "Secondary DTB";
+				reg = <0x7f00000 0x40000>; /* 256 KB */
+			};
+			partition@7f40000 {
+				label = "Secondary U-Boot environment";
+				reg = <0x7f40000 0x40000>; /* 256 KB */
+			};
+			partition@7f80000 {
+				label = "Secondary U-Boot";
+				reg = <0x7f80000 0x80000>; /* 512 KB */
+				read-only;
+			};
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/*
+			 * Actual part could be ST Micro NAND08GW3B2A (1 GB),
+			 * Micron MT29F8G08DAA (2x 512 MB), or Micron
+			 * MT29F16G08FAA (2x 1 GB), depending on the build
+			 * configuration
+			 */
+			compatible = "fsl,mpc8572-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <2 0 0x40000>;
+			/* U-Boot should fix this up if chip size > 1 GB */
+			partition@0 {
+				label = "NAND Filesystem";
+				reg = <0 0x40000000>;
+			};
+		};
+
+	};
+
+	soc8572@ef000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8572-immr", "simple-bus";
+		ranges = <0x0 0 0xef000000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8572-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		memory-controller@6000 {
+			compatible = "fsl,mpc8572-memory-controller";
+			reg = <0x6000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8572-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x100000>; // L2, 1M
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			temp-sensor@48 {
+				compatible = "dallas,ds1631", "dallas,ds1621";
+				reg = <0x48>;
+			};
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			cpu-supervisor@51 {
+				compatible = "dallas,ds4510";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,at24c128b";
+				reg = <0x54>;
+			};
+
+			rtc@68 {
+				compatible = "st,m41t00",
+				             "dallas,ds1338";
+				reg = <0x68>;
+			};
+
+			pcie-switch@70 {
+				compatible = "plx,pex8518";
+				reg = <0x70>;
+			};
+
+			gpio1: gpio@18 {
+				compatible = "nxp,pca9557";
+				reg = <0x18>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio2: gpio@1c {
+				compatible = "nxp,pca9557";
+				reg = <0x1c>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio3: gpio@1e {
+				compatible = "nxp,pca9557";
+				reg = <0x1e>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio4: gpio@1f {
+				compatible = "nxp,pca9557";
+				reg = <0x1f>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		/* eTSEC 1 */
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x1>;
+				};
+				phy1: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x2>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC 2 */
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* UART0 */
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		/* UART1 */
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,mpc8572-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		gpio0: gpio@f000 {
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x1000>;
+			interrupts = <47 2>;
+			interrupt-parent = <&mpic>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&gpio0 4 1>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			yellow {
+				label = "Yellow";
+				gpios = <&gpio0 5 1>;
+			};
+
+			red {
+				label = "Red";
+				gpios = <&gpio0 6 1>;
+			};
+
+			green {
+				label = "Green";
+				gpios = <&gpio0 7 1>;
+			};
+		};
+
+		/* PME (pattern-matcher) */
+		pme@10000 {
+			compatible = "fsl,mpc8572-pme", "pme8572";
+			reg = <0x10000 0x5000>;
+			interrupts = <57 2 64 2 65 2 66 2 67 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		tlu@2f000 {
+			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+			reg = <0x2f000 0x1000>;
+			interrupts = <61 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		tlu@15000 {
+			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+			reg = <0x15000 0x1000>;
+			interrupts = <75 2>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	/*
+	 * PCI Express controller 3 @ ef008000 is not used.
+	 * This would have been pci0 on other mpc85xx platforms.
+	 */
+
+	/* PCI Express controller 2, wired to VPX P1,P2 backplane */
+	pci1: pcie@ef009000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xef009000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0 0x0 0x0 0x1 &mpic 0x4 0x1
+			0x0 0x0 0x0 0x2 &mpic 0x5 0x1
+			0x0 0x0 0x0 0x3 &mpic 0x6 0x1
+			0x0 0x0 0x0 0x4 &mpic 0x7 0x1
+			>;
+		pcie@0 {
+			reg = <0x00000000 0x00000000 0x00000000 0x00000000 0x00000000>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x10000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	/* PCI Express controller 1, wired to PEX8518 PCIe switch */
+	pci2: pcie@ef00a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xef00a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000
+			  0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x0 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x0 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x0 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x40000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
diff --git a/src/powerpc/yosemite.dts b/src/powerpc/yosemite.dts
new file mode 100644
index 000000000000..30bb4753577a
--- /dev/null
+++ b/src/powerpc/yosemite.dts
@@ -0,0 +1,332 @@
+/*
+ * Device Tree Source for AMCC Yosemite
+ *
+ * Copyright 2008 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,yosemite";
+	compatible = "amcc,yosemite";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+		serial3 = &UART3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440EP";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440ep";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440ep";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		DMA0: dma {
+			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
+			dcr-reg = <0x100 0x027>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Bamboo is oddball in the 44x world and doesn't use the ERPN
+			 * bits.
+			 */
+			ranges = <0x00000000 0x00000000 0x00000000 0x80000000
+			          0x80000000 0x00000000 0x80000000 0x80000000>;
+			interrupt-parent = <&UIC1>;
+			interrupts = <0x7 0x4>;
+			clock-frequency = <0>; /* Filled in by zImage */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				interrupts = <0x5 0x1>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl256n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x04000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "ramdisk";
+						reg = <0x00200000 0x01400000>;
+					};
+					partition@1600000 {
+						label = "jffs2";
+						reg = <0x01600000 0x00400000>;
+					};
+					partition@1a00000 {
+						label = "user";
+						reg = <0x01a00000 0x02540000>;
+					};
+					partition@3f40000 {
+						label = "env";
+						reg = <0x03f40000 0x00040000>;
+					};
+					partition@3f80000 {
+						label = "u-boot";
+						reg = <0x03f80000 0x00080000>;
+					};
+				};
+			};
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				current-speed = <115200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			UART1: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			UART2: serial@ef600500 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600500 0x00000008>;
+				virtual-reg = <0xef600500>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+				status = "disabled";
+			};
+
+			UART3: serial@ef600600 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600600 0x00000008>;
+				virtual-reg = <0xef600600>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x4 0x4>;
+				status = "disabled";
+			};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xef600800 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x7 0x4>;
+			};
+
+			spi@ef600900 {
+				compatible = "amcc,spi-440ep";
+				reg = <0xef600900 0x00000006>;
+				interrupts = <0x8 0x4>;
+				interrupt-parent = <&UIC0>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
+				reg = <0xef600d00 0x0000000c>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xef600e00 0x00000070>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0 1>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rmii";
+				phy-map = <0x00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <0>;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0xef600f00 0x00000070>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2 3>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rmii";
+				phy-map = <0x00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <1>;
+			};
+
+			usb@ef601000 {
+				compatible = "ohci-be";
+				reg = <0xef601000 0x00000080>;
+				interrupts = <0x8 0x4 0x9 0x4>;
+				interrupt-parent = < &UIC1 >;
+			};
+		};
+
+		PCI0: pci@ec000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
+			primary;
+			reg = <0x00000000 0xeec00000 0x00000008	/* Config space access */
+			       0x00000000 0xeed00000 0x00000004	/* IACK */
+			       0x00000000 0xeed00000 0x00000004	/* Special cycle */
+			       0x00000000 0xef400000 0x00000040>;	/* Internal registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed. Chip supports a second
+			 * IO range but we don't use it for now
+			 */
+			ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000
+				  0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
+			interrupt-map = <
+				/* IDSEL 12 */
+				0x6000 0x0 0x0 0x0 &UIC0 0x19 0x8
+			>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600300";
+	};
+};
diff --git a/src/sh/j2_mimas_v2.dts b/src/sh/j2_mimas_v2.dts
new file mode 100755
index 000000000000..880de75360b3
--- /dev/null
+++ b/src/sh/j2_mimas_v2.dts
@@ -0,0 +1,96 @@
+/dts-v1/;
+
+/ {
+	compatible = "jcore,j2-soc";
+	model = "J2 FPGA SoC on Mimas v2 board";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&aic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "jcore,j2";
+			reg = <0>;
+			clock-frequency = <50000000>;
+			d-cache-size = <8192>;
+			i-cache-size = <8192>;
+			d-cache-block-size = <16>;
+			i-cache-block-size = <16>;
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x4000000>;
+	};
+
+	aliases {
+		serial0 = &uart0;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	soc@abcd0000 {
+		compatible = "simple-bus";
+		ranges = <0 0xabcd0000 0x100000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		aic: interrupt-controller@200 {
+			compatible = "jcore,aic1";
+			reg = <0x200 0x10>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		cache-controller@c0 {
+			compatible = "jcore,cache";
+			reg = <0xc0 4>;
+		};
+
+		timer@200 {
+			compatible = "jcore,pit";
+			reg = <0x200 0x30>;
+			interrupts = <0x48>;
+		};
+
+		spi0: spi@40 {
+			compatible = "jcore,spi2";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			spi-max-frequency = <25000000>;
+
+			reg = <0x40 0x8>;
+
+			sdcard@0 {
+				compatible = "mmc-spi-slot";
+				reg = <0>;
+				spi-max-frequency = <25000000>;
+				voltage-ranges = <3200 3400>;
+				mode = <0>;
+			};
+		};
+
+		uart0: serial@100 {
+			clock-frequency = <125000000>;
+			compatible = "xlnx,xps-uartlite-1.00.a";
+			current-speed = <19200>;
+			device_type = "serial";
+			interrupts = <0x12>;
+			port-number = <0>;
+			reg = <0x100 0x10>;
+		};
+	};
+};
diff --git a/src/x86/falconfalls.dts b/src/x86/falconfalls.dts
new file mode 100644
index 000000000000..ce874f872cc6
--- /dev/null
+++ b/src/x86/falconfalls.dts
@@ -0,0 +1,433 @@
+/*
+ * CE4100 on Falcon Falls
+ *
+ * (c) Copyright 2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License.
+ */
+/dts-v1/;
+/ {
+	model = "intel,falconfalls";
+	compatible = "intel,falconfalls";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "intel,ce4100";
+			reg = <0>;
+			lapic = <&lapic0>;
+		};
+	};
+
+	soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "intel,ce4100-cp";
+		ranges;
+
+		ioapic1: interrupt-controller@fec00000 {
+			#interrupt-cells = <2>;
+			compatible = "intel,ce4100-ioapic";
+			interrupt-controller;
+			reg = <0xfec00000 0x1000>;
+		};
+
+		timer@fed00000 {
+			compatible = "intel,ce4100-hpet";
+			reg = <0xfed00000 0x200>;
+		};
+
+		lapic0: interrupt-controller@fee00000 {
+			compatible = "intel,ce4100-lapic";
+			reg = <0xfee00000 0x1000>;
+		};
+
+		pci@3fc {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			compatible = "intel,ce4100-pci", "pci";
+			device_type = "pci";
+			bus-range = <0 0>;
+			ranges = <0x2000000 0 0xbffff000 0xbffff000 0 0x1000
+				  0x2000000 0 0xdffe0000 0xdffe0000 0 0x1000
+				  0x0000000 0 0x0	 0x0	    0 0x100>;
+
+			/* Secondary IO-APIC */
+			ioapic2: interrupt-controller@0,1 {
+				#interrupt-cells = <2>;
+				compatible = "intel,ce4100-ioapic";
+				interrupt-controller;
+				reg = <0x100 0x0 0x0 0x0 0x0>;
+				assigned-addresses = <0x02000000 0x0 0xbffff000 0x0 0x1000>;
+			};
+
+			pci@1,0 {
+				#address-cells = <3>;
+				#size-cells = <2>;
+				compatible = "intel,ce4100-pci", "pci";
+				device_type = "pci";
+				bus-range = <1 1>;
+				reg = <0x0800 0x0 0x0 0x0 0x0>;
+				ranges = <0x2000000 0 0xdffe0000 0x2000000 0 0xdffe0000 0 0x1000>;
+
+				interrupt-parent = <&ioapic2>;
+
+				display@2,0 {
+					compatible = "pci8086,2e5b.2",
+						   "pci8086,2e5b",
+						   "pciclass038000",
+						   "pciclass0380";
+
+					reg = <0x11000 0x0 0x0 0x0 0x0>;
+					interrupts = <0 1>;
+				};
+
+				multimedia@3,0 {
+					compatible = "pci8086,2e5c.2",
+						   "pci8086,2e5c",
+						   "pciclass048000",
+						   "pciclass0480";
+
+					reg = <0x11800 0x0 0x0 0x0 0x0>;
+					interrupts = <2 1>;
+				};
+
+				multimedia@4,0 {
+					compatible = "pci8086,2e5d.2",
+						   "pci8086,2e5d",
+						   "pciclass048000",
+						   "pciclass0480";
+
+					reg = <0x12000 0x0 0x0 0x0 0x0>;
+					interrupts = <4 1>;
+				};
+
+				multimedia@4,1 {
+					compatible = "pci8086,2e5e.2",
+						   "pci8086,2e5e",
+						   "pciclass048000",
+						   "pciclass0480";
+
+					reg = <0x12100 0x0 0x0 0x0 0x0>;
+					interrupts = <5 1>;
+				};
+
+				sound@6,0 {
+					compatible = "pci8086,2e5f.2",
+						   "pci8086,2e5f",
+						   "pciclass040100",
+						   "pciclass0401";
+
+					reg = <0x13000 0x0 0x0 0x0 0x0>;
+					interrupts = <6 1>;
+				};
+
+				sound@6,1 {
+					compatible = "pci8086,2e5f.2",
+						   "pci8086,2e5f",
+						   "pciclass040100",
+						   "pciclass0401";
+
+					reg = <0x13100 0x0 0x0 0x0 0x0>;
+					interrupts = <7 1>;
+				};
+
+				sound@6,2 {
+					compatible = "pci8086,2e60.2",
+						   "pci8086,2e60",
+						   "pciclass040100",
+						   "pciclass0401";
+
+					reg = <0x13200 0x0 0x0 0x0 0x0>;
+					interrupts = <8 1>;
+				};
+
+				display@8,0 {
+					compatible = "pci8086,2e61.2",
+						   "pci8086,2e61",
+						   "pciclass038000",
+						   "pciclass0380";
+
+					reg = <0x14000 0x0 0x0 0x0 0x0>;
+					interrupts = <9 1>;
+				};
+
+				display@8,1 {
+					compatible = "pci8086,2e62.2",
+						   "pci8086,2e62",
+						   "pciclass038000",
+						   "pciclass0380";
+
+					reg = <0x14100 0x0 0x0 0x0 0x0>;
+					interrupts = <10 1>;
+				};
+
+				multimedia@8,2 {
+					compatible = "pci8086,2e63.2",
+						   "pci8086,2e63",
+						   "pciclass048000",
+						   "pciclass0480";
+
+					reg = <0x14200 0x0 0x0 0x0 0x0>;
+					interrupts = <11 1>;
+				};
+
+				entertainment-encryption@9,0 {
+					compatible = "pci8086,2e64.2",
+						   "pci8086,2e64",
+						   "pciclass101000",
+						   "pciclass1010";
+
+					reg = <0x14800 0x0 0x0 0x0 0x0>;
+					interrupts = <12 1>;
+				};
+
+				localbus@a,0 {
+					compatible = "pci8086,2e65.2",
+						   "pci8086,2e65",
+						   "pciclassff0000",
+						   "pciclassff00";
+
+					reg = <0x15000 0x0 0x0 0x0 0x0>;
+				};
+
+				serial@b,0 {
+					compatible = "pci8086,2e66.2",
+						   "pci8086,2e66",
+						   "pciclass070003",
+						   "pciclass0700";
+
+					reg = <0x15800 0x0 0x0 0x0 0x0>;
+					interrupts = <14 1>;
+				};
+
+				pcigpio: gpio@b,1 {
+					#gpio-cells = <2>;
+					#interrupt-cells = <2>;
+					compatible = "pci8086,2e67.2",
+						   "pci8086,2e67",
+						   "pciclassff0000",
+						   "pciclassff00";
+
+					reg = <0x15900 0x0 0x0 0x0 0x0>;
+					interrupts = <15 1>;
+					interrupt-controller;
+					gpio-controller;
+					intel,muxctl = <0>;
+				};
+
+				i2c-controller@b,2 {
+					#address-cells = <2>;
+					#size-cells = <1>;
+					compatible = "pci8086,2e68.2",
+						   "pci8086,2e68",
+						   "pciclass,ff0000",
+						   "pciclass,ff00";
+
+					reg = <0x15a00 0x0 0x0 0x0 0x0>;
+					interrupts = <16 1>;
+					ranges = <0 0	0x02000000 0 0xdffe0500	0x100
+						  1 0	0x02000000 0 0xdffe0600	0x100
+						  2 0	0x02000000 0 0xdffe0700	0x100>;
+
+					i2c@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						compatible = "intel,ce4100-i2c-controller";
+						reg = <0 0 0x100>;
+					};
+
+					i2c@1 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						compatible = "intel,ce4100-i2c-controller";
+						reg = <1 0 0x100>;
+
+						gpio@26 {
+							#gpio-cells = <2>;
+							compatible = "ti,pcf8575";
+							reg = <0x26>;
+							gpio-controller;
+						};
+					};
+
+					i2c@2 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						compatible = "intel,ce4100-i2c-controller";
+						reg = <2 0 0x100>;
+
+						gpio@26 {
+							#gpio-cells = <2>;
+							compatible = "ti,pcf8575";
+							reg = <0x26>;
+							gpio-controller;
+						};
+					};
+				};
+
+				smard-card@b,3 {
+					compatible = "pci8086,2e69.2",
+						   "pci8086,2e69",
+						   "pciclass070500",
+						   "pciclass0705";
+
+					reg = <0x15b00 0x0 0x0 0x0 0x0>;
+					interrupts = <15 1>;
+				};
+
+				spi-controller@b,4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible =
+						"pci8086,2e6a.2",
+						"pci8086,2e6a",
+						"pciclass,ff0000",
+						"pciclass,ff00";
+
+					reg = <0x15c00 0x0 0x0 0x0 0x0>;
+					interrupts = <15 1>;
+
+					dac@0 {
+						compatible = "ti,pcm1755";
+						reg = <0>;
+						spi-max-frequency = <115200>;
+					};
+
+					dac@1 {
+						compatible = "ti,pcm1609a";
+						reg = <1>;
+						spi-max-frequency = <115200>;
+					};
+
+					eeprom@2 {
+						compatible = "atmel,at93c46";
+						reg = <2>;
+						spi-max-frequency = <115200>;
+					};
+				};
+
+				multimedia@b,7 {
+					compatible = "pci8086,2e6d.2",
+						   "pci8086,2e6d",
+						   "pciclassff0000",
+						   "pciclassff00";
+
+					reg = <0x15f00 0x0 0x0 0x0 0x0>;
+				};
+
+				ethernet@c,0 {
+					compatible = "pci8086,2e6e.2",
+						   "pci8086,2e6e",
+						   "pciclass020000",
+						   "pciclass0200";
+
+					reg = <0x16000 0x0 0x0 0x0 0x0>;
+					interrupts = <21 1>;
+				};
+
+				clock@c,1 {
+					compatible = "pci8086,2e6f.2",
+						   "pci8086,2e6f",
+						   "pciclassff0000",
+						   "pciclassff00";
+
+					reg = <0x16100 0x0 0x0 0x0 0x0>;
+					interrupts = <3 1>;
+				};
+
+				usb@d,0 {
+					compatible = "pci8086,2e70.2",
+						   "pci8086,2e70",
+						   "pciclass0c0320",
+						   "pciclass0c03";
+
+					reg = <0x16800 0x0 0x0 0x0 0x0>;
+					interrupts = <22 1>;
+				};
+
+				usb@d,1 {
+					compatible = "pci8086,2e70.2",
+						   "pci8086,2e70",
+						   "pciclass0c0320",
+						   "pciclass0c03";
+
+					reg = <0x16900 0x0 0x0 0x0 0x0>;
+					interrupts = <22 1>;
+				};
+
+				sata@e,0 {
+					compatible = "pci8086,2e71.0",
+						   "pci8086,2e71",
+						   "pciclass010601",
+						   "pciclass0106";
+
+					reg = <0x17000 0x0 0x0 0x0 0x0>;
+					interrupts = <23 1>;
+				};
+
+				flash@f,0 {
+					compatible = "pci8086,701.1",
+						   "pci8086,701",
+						   "pciclass050100",
+						   "pciclass0501";
+
+					reg = <0x17800 0x0 0x0 0x0 0x0>;
+					interrupts = <13 1>;
+				};
+
+				entertainment-encryption@10,0 {
+					compatible = "pci8086,702.1",
+						   "pci8086,702",
+						   "pciclass101000",
+						   "pciclass1010";
+
+					reg = <0x18000 0x0 0x0 0x0 0x0>;
+				};
+
+				co-processor@11,0 {
+					compatible = "pci8086,703.1",
+						   "pci8086,703",
+						   "pciclass0b4000",
+						   "pciclass0b40";
+
+					reg = <0x18800 0x0 0x0 0x0 0x0>;
+					interrupts = <1 1>;
+				};
+
+				multimedia@12,0 {
+					compatible = "pci8086,704.0",
+						   "pci8086,704",
+						   "pciclass048000",
+						   "pciclass0480";
+
+					reg = <0x19000 0x0 0x0 0x0 0x0>;
+				};
+			};
+
+			isa@1f,0 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				compatible = "isa";
+				reg = <0xf800 0x0 0x0 0x0 0x0>;
+				ranges = <1 0 0 0 0 0x100>;
+
+				rtc@70 {
+					compatible = "intel,ce4100-rtc", "motorola,mc146818";
+					interrupts = <8 3>;
+					interrupt-parent = <&ioapic1>;
+					ctrl-reg = <2>;
+					freq-reg = <0x26>;
+					reg = <1 0x70 2>;
+				};
+			};
+		};
+	};
+};
diff --git a/src/xtensa/csp.dts b/src/xtensa/csp.dts
new file mode 100644
index 000000000000..4082f26716b9
--- /dev/null
+++ b/src/xtensa/csp.dts
@@ -0,0 +1,54 @@
+/dts-v1/;
+
+/ {
+	compatible = "cdns,xtensa-xtfpga";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&pic>;
+
+	chosen {
+		bootargs = "earlycon=cdns,0xfd000000,115200 console=tty0 console=ttyPS0,115200 root=/dev/ram0 rw earlyprintk xilinx_uartps.rx_trigger_level=32 loglevel=8 nohz=off ignore_loglevel";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "cdns,xtensa-cpu";
+			reg = <0>;
+		};
+	};
+
+	pic: pic {
+		compatible = "cdns,xtensa-pic";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	clocks {
+		osc: main-oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x00000000 0xf0000000 0x10000000>;
+
+		uart0: serial@0d000000 {
+			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
+			clocks = <&osc>, <&osc>;
+			clock-names = "uart_clk", "pclk";
+			reg = <0x0d000000 0x1000>;
+			interrupts = <0 1>;
+		};
+	};
+};
diff --git a/src/xtensa/kc705.dts b/src/xtensa/kc705.dts
new file mode 100644
index 000000000000..6106bdc097ad
--- /dev/null
+++ b/src/xtensa/kc705.dts
@@ -0,0 +1,30 @@
+/dts-v1/;
+/include/ "xtfpga.dtsi"
+/include/ "xtfpga-flash-128m.dtsi"
+
+/ {
+	compatible = "cdns,xtensa-kc705";
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=0x38000000";
+	};
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x38000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x04000000>;
+			alignment = <0x2000>;
+			alloc-ranges = <0x00000000 0x20000000>;
+			linux,cma-default;
+		};
+	};
+};
diff --git a/src/xtensa/kc705_nommu.dts b/src/xtensa/kc705_nommu.dts
new file mode 100644
index 000000000000..65f3d741b964
--- /dev/null
+++ b/src/xtensa/kc705_nommu.dts
@@ -0,0 +1,17 @@
+/dts-v1/;
+/include/ "xtfpga.dtsi"
+/include/ "xtfpga-flash-128m.dtsi"
+
+/ {
+	compatible = "cdns,xtensa-kc705";
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0x9d050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug";
+	};
+	memory@0 {
+		device_type = "memory";
+		reg = <0x60000000 0x10000000>;
+	};
+	soc {
+		ranges = <0x00000000 0x90000000 0x10000000>;
+	};
+};
diff --git a/src/xtensa/lx200mx.dts b/src/xtensa/lx200mx.dts
new file mode 100644
index 000000000000..249822b99bd6
--- /dev/null
+++ b/src/xtensa/lx200mx.dts
@@ -0,0 +1,16 @@
+/dts-v1/;
+/include/ "xtfpga.dtsi"
+/include/ "xtfpga-flash-16m.dtsi"
+
+/ {
+	compatible = "cdns,xtensa-lx200";
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x06000000>;
+	};
+	pic: pic {
+		compatible = "cdns,xtensa-mx";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+};
diff --git a/src/xtensa/lx60.dts b/src/xtensa/lx60.dts
new file mode 100644
index 000000000000..a0f8b8ad3920
--- /dev/null
+++ b/src/xtensa/lx60.dts
@@ -0,0 +1,11 @@
+/dts-v1/;
+/include/ "xtfpga.dtsi"
+/include/ "xtfpga-flash-4m.dtsi"
+
+/ {
+	compatible = "cdns,xtensa-lx60";
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;
+	};
+};
diff --git a/src/xtensa/ml605.dts b/src/xtensa/ml605.dts
new file mode 100644
index 000000000000..905c3a5035e9
--- /dev/null
+++ b/src/xtensa/ml605.dts
@@ -0,0 +1,11 @@
+/dts-v1/;
+/include/ "xtfpga.dtsi"
+/include/ "xtfpga-flash-16m.dtsi"
+
+/ {
+	compatible = "cdns,xtensa-ml605";
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+};
diff --git a/src/xtensa/xtfpga-flash-128m.dtsi b/src/xtensa/xtfpga-flash-128m.dtsi
new file mode 100644
index 000000000000..d3a88e029873
--- /dev/null
+++ b/src/xtensa/xtfpga-flash-128m.dtsi
@@ -0,0 +1,28 @@
+/ {
+	soc {
+		flash: flash@00000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x00000000 0x08000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			partition@0x0 {
+				label = "data";
+				reg = <0x00000000 0x06000000>;
+			};
+			partition@0x6000000 {
+				label = "boot loader area";
+				reg = <0x06000000 0x00800000>;
+			};
+			partition@0x6800000 {
+				label = "kernel image";
+				reg = <0x06800000 0x017e0000>;
+			};
+			partition@0x7fe0000 {
+				label = "boot environment";
+				reg = <0x07fe0000 0x00020000>;
+			};
+		};
+        };
+};
diff --git a/src/xtensa/xtfpga-flash-16m.dtsi b/src/xtensa/xtfpga-flash-16m.dtsi
new file mode 100644
index 000000000000..1d97203c18e7
--- /dev/null
+++ b/src/xtensa/xtfpga-flash-16m.dtsi
@@ -0,0 +1,28 @@
+/ {
+	soc {
+		flash: flash@08000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x08000000 0x01000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			partition@0x0 {
+				label = "boot loader area";
+				reg = <0x00000000 0x00400000>;
+			};
+			partition@0x400000 {
+				label = "kernel image";
+				reg = <0x00400000 0x00600000>;
+			};
+			partition@0xa00000 {
+				label = "data";
+				reg = <0x00a00000 0x005e0000>;
+			};
+			partition@0xfe0000 {
+				label = "boot environment";
+				reg = <0x00fe0000 0x00020000>;
+			};
+		};
+	};
+};
diff --git a/src/xtensa/xtfpga-flash-4m.dtsi b/src/xtensa/xtfpga-flash-4m.dtsi
new file mode 100644
index 000000000000..d1c621ca8be1
--- /dev/null
+++ b/src/xtensa/xtfpga-flash-4m.dtsi
@@ -0,0 +1,20 @@
+/ {
+	soc {
+		flash: flash@08000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x08000000 0x00400000>;
+			bank-width = <2>;
+			device-width = <2>;
+			partition@0x0 {
+				label = "boot loader area";
+				reg = <0x00000000 0x003f0000>;
+			};
+			partition@0x3f0000 {
+				label = "boot environment";
+				reg = <0x003f0000 0x00010000>;
+			};
+		};
+	};
+};
diff --git a/src/xtensa/xtfpga.dtsi b/src/xtensa/xtfpga.dtsi
new file mode 100644
index 000000000000..91616a9d79df
--- /dev/null
+++ b/src/xtensa/xtfpga.dtsi
@@ -0,0 +1,136 @@
+/ {
+	compatible = "cdns,xtensa-xtfpga";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&pic>;
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x06000000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "cdns,xtensa-cpu";
+			reg = <0>;
+			clocks = <&osc>;
+		};
+	};
+
+	pic: pic {
+		compatible = "cdns,xtensa-pic";
+		/* one cell: internal irq number,
+		 * two cells: second cell == 0: internal irq number
+		 *            second cell == 1: external irq number
+		 */
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	clocks {
+		clk54: clk54 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <54000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x00000000 0xf0000000 0x10000000>;
+
+		osc: main-oscillator {
+			#clock-cells = <0>;
+			compatible = "cdns,xtfpga-clock";
+			reg = <0x0d020004 0x4>;
+		};
+
+		serial0: serial@0d050020 {
+			device_type = "serial";
+			compatible = "ns16550a";
+			no-loopback-test;
+			reg = <0x0d050020 0x20>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			native-endian;
+			interrupts = <0 1>; /* external irq 0 */
+			clocks = <&osc>;
+		};
+
+		enet0: ethoc@0d030000 {
+			compatible = "opencores,ethoc";
+			reg = <0x0d030000 0x4000 0x0d800000 0x4000>;
+			native-endian;
+			interrupts = <1 1>; /* external irq 1 */
+			local-mac-address = [00 50 c2 13 6f 00];
+			clocks = <&osc>;
+		};
+
+		i2s0: xtfpga-i2s@0d080000 {
+			#sound-dai-cells = <0>;
+			compatible = "cdns,xtfpga-i2s";
+			reg = <0x0d080000 0x40>;
+			interrupts = <2 1>; /* external irq 2 */
+			clocks = <&cdce706 4>;
+		};
+
+		i2c0: i2c-master@0d090000 {
+			compatible = "opencores,i2c-ocores";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0d090000 0x20>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			native-endian;
+			interrupts = <4 1>;
+			clocks = <&osc>;
+
+			cdce706: clock-synth@69 {
+				compatible = "ti,cdce706";
+				#clock-cells = <1>;
+				reg = <0x69>;
+				clocks = <&clk54>;
+				clock-names = "clk_in0";
+			};
+		};
+
+		spi0: spi-master@0d0a0000 {
+			compatible = "cdns,xtfpga-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0d0a0000 0xc>;
+
+			tlv320aic23: sound-codec@0 {
+				#sound-dai-cells = <0>;
+				compatible = "tlv320aic23";
+				reg = <0>;
+				spi-max-frequency = <12500000>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tlv320aic23>;
+			simple-audio-card,bitclock-master = <0>;
+			simple-audio-card,frame-master = <0>;
+			clocks = <&cdce706 4>;
+		};
+	};
+};