diff options
Diffstat (limited to 'sys/contrib/device-tree/Bindings/iio/adc/st,stm32-adc.yaml')
-rw-r--r-- | sys/contrib/device-tree/Bindings/iio/adc/st,stm32-adc.yaml | 186 |
1 files changed, 170 insertions, 16 deletions
diff --git a/sys/contrib/device-tree/Bindings/iio/adc/st,stm32-adc.yaml b/sys/contrib/device-tree/Bindings/iio/adc/st,stm32-adc.yaml index a58334c3bb76..995cbf8cefc6 100644 --- a/sys/contrib/device-tree/Bindings/iio/adc/st,stm32-adc.yaml +++ b/sys/contrib/device-tree/Bindings/iio/adc/st,stm32-adc.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: STMicroelectronics STM32 ADC bindings +title: STMicroelectronics STM32 ADC description: | STM32 ADC is a successive approximation analog-to-digital converter. @@ -19,7 +19,7 @@ description: | Each STM32 ADC block can have up to 3 ADC instances. maintainers: - - Fabrice Gasnier <fabrice.gasnier@st.com> + - Fabrice Gasnier <fabrice.gasnier@foss.st.com> properties: compatible: @@ -27,6 +27,7 @@ properties: - st,stm32f4-adc-core - st,stm32h7-adc-core - st,stm32mp1-adc-core + - st,stm32mp13-adc-core reg: maxItems: 1 @@ -37,6 +38,7 @@ properties: - stm32f4 and stm32h7 share a common ADC interrupt line. - stm32mp1 has two separate interrupt lines, one for each ADC within ADC block. + - stm32mp13 has an interrupt line per ADC block. minItems: 1 maxItems: 2 @@ -78,7 +80,7 @@ properties: description: Phandle to system configuration controller. It can be used to control the analog circuitry on stm32mp1. - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: /schemas/types.yaml#/definitions/phandle-array interrupt-controller: true @@ -138,7 +140,6 @@ allOf: - const: bus - const: adc minItems: 1 - maxItems: 2 interrupts: items: @@ -170,7 +171,6 @@ allOf: - const: bus - const: adc minItems: 1 - maxItems: 2 interrupts: items: @@ -182,6 +182,33 @@ allOf: maximum: 36000000 default: 36000000 + - if: + properties: + compatible: + contains: + const: st,stm32mp13-adc-core + + then: + properties: + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + items: + - const: bus + - const: adc + minItems: 1 + + interrupts: + items: + - description: ADC interrupt line + + st,max-clk-rate-hz: + minimum: 150000 + maximum: 75000000 + default: 75000000 + additionalProperties: false required: @@ -210,6 +237,7 @@ patternProperties: - st,stm32f4-adc - st,stm32h7-adc - st,stm32mp1-adc + - st,stm32mp13-adc reg: description: | @@ -222,10 +250,16 @@ patternProperties: '#io-channel-cells': const: 1 + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + interrupts: description: | IRQ Line for the ADC instance. Valid values are: - - 0 for adc@0 + - 0 for adc@0 (single adc for stm32mp13) - 1 for adc@100 - 2 for adc@200 (stm32f4 only) maxItems: 1 @@ -246,16 +280,18 @@ patternProperties: assigned-resolution-bits: description: | Resolution (bits) to use for conversions: - - can be 6, 8, 10 or 12 on stm32f4 + - can be 6, 8, 10 or 12 on stm32f4 and stm32mp13 - can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1 st,adc-channels: description: | List of single-ended channels muxed for this ADC. It can have up to: - 16 channels, numbered from 0 to 15 (for in0..in15) on stm32f4 + - 19 channels, numbered from 0 to 18 (for in0..in18) on stm32mp13. - 20 channels, numbered from 0 to 19 (for in0..in19) on stm32h7 and stm32mp1. $ref: /schemas/types.yaml#/definitions/uint32-array + deprecated: true st,adc-diff-channels: description: | @@ -265,7 +301,9 @@ patternProperties: <vinp vinn>, <vinp vinn>,... vinp and vinn are numbered from 0 to 19. Note: At least one of "st,adc-channels" or "st,adc-diff-channels" is - required. Both properties can be used together. Some channels can be + required if no adc generic channel is defined. These legacy channel + properties are exclusive with adc generic channel bindings. + Both properties can be used together. Some channels can be used as single-ended and some other ones as differential (mixed). But channels can't be configured both as single-ended and differential. $ref: /schemas/types.yaml#/definitions/uint32-matrix @@ -279,6 +317,7 @@ patternProperties: "vinn" indicates negative input number minimum: 0 maximum: 19 + deprecated: true st,min-sample-time-nsecs: description: @@ -289,6 +328,50 @@ patternProperties: list, to set sample time resp. for all channels, or independently for each channel. $ref: /schemas/types.yaml#/definitions/uint32-array + deprecated: true + + nvmem-cells: + items: + - description: Phandle to the calibration vrefint data provided by otp + + nvmem-cell-names: + items: + - const: vrefint + + patternProperties: + "^channel@([0-9]|1[0-9])$": + type: object + $ref: adc.yaml + description: Represents the external channels which are connected to the ADC. + + properties: + reg: + items: + minimum: 0 + maximum: 19 + + label: + description: | + Unique name to identify which channel this is. + Reserved label names "vddcore", "vddcpu", "vddq_ddr", "vrefint" and "vbat" + are used to identify internal channels with matching names. + + diff-channels: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minimum: 0 + maximum: 19 + + st,min-sample-time-ns: + description: | + Minimum sampling time in nanoseconds. Depending on hardware (board) + e.g. high/low analog input source impedance, fine tune of ADC + sampling time may be recommended. + + required: + - reg + + additionalProperties: false allOf: - if: @@ -367,13 +450,38 @@ patternProperties: items: minimum: 40 - additionalProperties: false - anyOf: - - required: - - st,adc-channels - - required: - - st,adc-diff-channels + - if: + properties: + compatible: + contains: + const: st,stm32mp13-adc + + then: + properties: + reg: + const: 0x0 + + interrupts: + const: 0 + + assigned-resolution-bits: + enum: [6, 8, 10, 12] + default: 12 + + st,adc-channels: + minItems: 1 + maxItems: 19 + items: + minimum: 0 + maximum: 18 + + st,min-sample-time-nsecs: + minItems: 1 + maxItems: 19 + items: + minimum: 40 + additionalProperties: false required: - compatible @@ -451,4 +559,50 @@ examples: // other adc child node follow... }; + - | + // Example 3: with stm32mp157c to setup ADC2 with: + // - internal channels 13, 14, 15. + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + adc122: adc@48003000 { + compatible = "st,stm32mp1-adc-core"; + reg = <0x48003000 0x400>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc ADC12>, <&rcc ADC12_K>; + clock-names = "bus", "adc"; + booster-supply = <&booster>; + vdd-supply = <&vdd>; + vdda-supply = <&vdda>; + vref-supply = <&vref>; + st,syscfg = <&syscfg>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + adc@100 { + compatible = "st,stm32mp1-adc"; + #io-channel-cells = <1>; + reg = <0x100>; + interrupts = <1>; + #address-cells = <1>; + #size-cells = <0>; + channel@13 { + reg = <13>; + label = "vrefint"; + st,min-sample-time-ns = <9000>; + }; + channel@14 { + reg = <14>; + label = "vddcore"; + st,min-sample-time-ns = <9000>; + }; + channel@15 { + reg = <15>; + label = "vbat"; + st,min-sample-time-ns = <9000>; + }; + }; + }; + ... |