diff options
Diffstat (limited to 'sys/contrib/device-tree/Bindings/media/i2c')
46 files changed, 2373 insertions, 134 deletions
diff --git a/sys/contrib/device-tree/Bindings/media/i2c/adi,ad5820.yaml b/sys/contrib/device-tree/Bindings/media/i2c/adi,ad5820.yaml new file mode 100644 index 000000000000..0c8f24f692ca --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/adi,ad5820.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/adi,ad5820.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD5820 autofocus coil + +maintainers: + - Pavel Machek <pavel@ucw.cz> + +description: + The AD5820 is a current sink driver designed for precise control of + voice coil motors (VCMs) in camera autofocus systems. + +properties: + compatible: + enum: + - adi,ad5820 + - adi,ad5821 + - adi,ad5823 + + reg: + maxItems: 1 + + enable-gpios: + maxItems: 1 + description: + GPIO spec for the XSHUTDOWN pin. The XSHUTDOWN signal is active low, + a high level on the pin enables the device. + + VANA-supply: + description: supply of voltage for VANA pin + +required: + - compatible + - reg + - VANA-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + coil@c { + compatible = "adi,ad5820"; + reg = <0x0c>; + + enable-gpios = <&msmgpio 26 GPIO_ACTIVE_HIGH>; + VANA-supply = <&vaux4>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/adi,adp1653.txt b/sys/contrib/device-tree/Bindings/media/i2c/adi,adp1653.txt new file mode 100644 index 000000000000..4cce0de40ee9 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/adi,adp1653.txt @@ -0,0 +1,38 @@ +* Analog Devices ADP1653 flash LED driver + +Required Properties: + + - compatible: Must contain "adi,adp1653" + + - reg: I2C slave address + + - enable-gpios: Specifier of the GPIO connected to EN pin + +There are two LED outputs available - flash and indicator. One LED is +represented by one child node, nodes need to be named "flash" and "indicator". + +Required properties of the LED child node: +- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt + +Required properties of the flash LED child node: + +- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt +- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt +- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt + +Example: + + adp1653: led-controller@30 { + compatible = "adi,adp1653"; + reg = <0x30>; + enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ + + flash { + flash-timeout-us = <500000>; + flash-max-microamp = <320000>; + led-max-microamp = <50000>; + }; + indicator { + led-max-microamp = <17500>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/adi,adv7180.yaml b/sys/contrib/device-tree/Bindings/media/i2c/adi,adv7180.yaml new file mode 100644 index 000000000000..dee8ce7cb7ba --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/adi,adv7180.yaml @@ -0,0 +1,189 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/adi,adv7180.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADV7180 analog video decoder family + +maintainers: + - Lars-Peter Clausen <lars@metafoo.de> + +description: + The adv7180 family devices are used to capture analog video to different + digital interfaces like MIPI CSI-2 or parallel video. + +properties: + compatible: + items: + - enum: + - adi,adv7180 + - adi,adv7180cp + - adi,adv7180st + - adi,adv7182 + - adi,adv7280 + - adi,adv7280-m + - adi,adv7281 + - adi,adv7281-m + - adi,adv7281-ma + - adi,adv7282 + - adi,adv7282-m + + reg: + maxItems: 1 + + powerdown-gpios: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + adv,force-bt656-4: + deprecated: true + description: + Indicates that the output is a BT.656-4 compatible stream. + type: boolean + + adi,force-bt656-4: + description: + Indicates that the output is a BT.656-4 compatible stream. + type: boolean + + interrupts: + items: + - description: The GPIO connected to the INTRQ pin. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + ports: true + +additionalProperties: false + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + enum: + - adi,adv7180 + - adi,adv7182 + - adi,adv7280 + - adi,adv7280-m + - adi,adv7281 + - adi,adv7281-m + - adi,adv7281-ma + - adi,adv7282 + - adi,adv7282-m + then: + required: + - port + + - if: + properties: + compatible: + contains: + const: adi,adv7180cp + then: + properties: + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: Output port + + patternProperties: + "^port@[0-2]$": + $ref: /schemas/graph.yaml#/properties/port + description: Input port + + required: + - port@3 + + required: + - ports + + - if: + properties: + compatible: + contains: + const: adi,adv7180st + then: + properties: + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@6: + $ref: /schemas/graph.yaml#/properties/port + description: Output port + + patternProperties: + "^port@[0-5]$": + $ref: /schemas/graph.yaml#/properties/port + description: Input port + + required: + - port@6 + + required: + - ports + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin1ep>; + }; + }; + }; + + }; + + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + composite-in@20 { + compatible = "adi,adv7180cp"; + reg = <0x20>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7180_in: endpoint { + remote-endpoint = <&composite_con_in>; + }; + }; + + port@3 { + reg = <3>; + adv7180_out: endpoint { + remote-endpoint = <&vin4_in>; + }; + }; + }; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/adi,adv7343.txt b/sys/contrib/device-tree/Bindings/media/i2c/adi,adv7343.txt new file mode 100644 index 000000000000..5653bc2428b8 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/adi,adv7343.txt @@ -0,0 +1,48 @@ +* Analog Devices adv7343 video encoder + +The ADV7343 are high speed, digital-to-analog video encoders in a 64-lead LQFP +package. Six high speed, 3.3 V, 11-bit video DACs provide support for composite +(CVBS), S-Video (Y-C), and component (YPrPb/RGB) analog outputs in standard +definition (SD), enhanced definition (ED), or high definition (HD) video +formats. + +Required Properties : +- compatible: Must be "adi,adv7343" + +Optional Properties : +- adi,power-mode-sleep-mode: on enable the current consumption is reduced to + micro ampere level. All DACs and the internal PLL + circuit are disabled. +- adi,power-mode-pll-ctrl: PLL and oversampling control. This control allows + internal PLL 1 circuit to be powered down and the + oversampling to be switched off. +- ad,adv7343-power-mode-dac: array configuring the power on/off DAC's 1..6, + 0 = OFF and 1 = ON, Default value when this + property is not specified is <0 0 0 0 0 0>. +- ad,adv7343-sd-config-dac-out: array configure SD DAC Output's 1 and 2, 0 = OFF + and 1 = ON, Default value when this property is + not specified is <0 0>. + +Example: + +i2c0@1c22000 { + ... + ... + + adv7343@2a { + compatible = "adi,adv7343"; + reg = <0x2a>; + + port { + adv7343_1: endpoint { + adi,power-mode-sleep-mode; + adi,power-mode-pll-ctrl; + /* Use DAC1..3, DAC6 */ + adi,dac-enable = <1 1 1 0 0 1>; + /* Use SD DAC output 1 */ + adi,sd-dac-enable = <1 0>; + }; + }; + }; + ... +}; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/adi,adv748x.yaml b/sys/contrib/device-tree/Bindings/media/i2c/adi,adv748x.yaml new file mode 100644 index 000000000000..254987350321 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/adi,adv748x.yaml @@ -0,0 +1,212 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/adi,adv748x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADV748X video decoder with HDMI receiver + +maintainers: + - Kieran Bingham <kieran.bingham@ideasonboard.com> + - Niklas Söderlund <niklas.soderlund@ragnatech.se> + +description: + The ADV7481 and ADV7482 are multi format video decoders with an integrated + HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB + from three input sources HDMI, analog and TTL. + +properties: + compatible: + items: + - enum: + - adi,adv7481 + - adi,adv7482 + + reg: + minItems: 1 + maxItems: 12 + description: + The ADV748x has up to twelve 256-byte maps that can be accessed via the + main I2C ports. Each map has it own I2C address and acts as a standard + slave device on the I2C bus. The main address is mandatory, others are + optional and remain at default values if not specified. + + reg-names: + minItems: 1 + items: + - const: main + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + + interrupts: true + + interrupt-names: true + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + patternProperties: + "^port@[0-7]$": + $ref: /schemas/graph.yaml#/properties/port + description: Input port nodes for analog inputs AIN[0-7]. + + properties: + port@8: + $ref: /schemas/graph.yaml#/properties/port + description: Input port node for HDMI. + + port@9: + $ref: /schemas/graph.yaml#/properties/port + description: Input port node for TTL. + + port@a: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Output port node, single endpoint describing the CSI-2 transmitter TXA. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@b: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Output port node, single endpoint describing the CSI-2 transmitter TXB. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + maxItems: 1 + + required: + - clock-lanes + - data-lanes + +allOf: + - if: + properties: + compatible: + contains: + const: adi,adv7481 + then: + properties: + interrupts: + minItems: 1 + maxItems: 3 + + interrupt-names: + minItems: 1 + maxItems: 3 + items: + enum: [ intrq1, intrq2, intrq3 ] + else: + properties: + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + enum: [ intrq1, intrq2 ] + +additionalProperties: false + +required: + - compatible + - reg + - ports + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + video-receiver@70 { + compatible = "adi,adv7482"; + reg = <0x70 0x71 0x72 0x73 0x74 0x75 + 0x60 0x61 0x62 0x63 0x64 0x65>; + reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater", + "infoframe", "cbus", "cec", "sdp", "txa", "txb"; + + interrupt-parent = <&gpio6>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>, <31 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "intrq1", "intrq2"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + + adv7482_ain7: endpoint { + remote-endpoint = <&cvbs_in>; + }; + }; + + port@8 { + reg = <8>; + + adv7482_hdmi: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + + port@a { + reg = <10>; + + adv7482_txa: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + + port@b { + reg = <11>; + + adv7482_txb: endpoint { + clock-lanes = <0>; + data-lanes = <1>; + remote-endpoint = <&csi20_in>; + }; + }; + }; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/adi,adv7604.yaml b/sys/contrib/device-tree/Bindings/media/i2c/adi,adv7604.yaml new file mode 100644 index 000000000000..6c403003cdda --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/adi,adv7604.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/adi,adv7604.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADV7604/10/11/12 video decoder with HDMI receiver + +maintainers: + - Hans Verkuil <hverkuil-cisco@xs4all.nl> + +description: + The ADV7604 and ADV7610/11/12 are multiformat video decoders with + an integrated HDMI receiver. The ADV7604 has four multiplexed HDMI inputs + and one analog input, and the ADV7610/11 have one HDMI input and no analog + input. The ADV7612 is similar to the ADV7610/11 but has 2 HDMI inputs. + + These device tree bindings support the ADV7610/11/12 only at the moment. + +properties: + compatible: + items: + - enum: + - adi,adv7610 + - adi,adv7611 + - adi,adv7612 + + reg: + minItems: 1 + maxItems: 13 + + reg-names: + minItems: 1 + items: + - const: main + - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] + - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] + - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] + - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] + - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] + - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] + - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] + - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] + - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] + - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] + - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] + - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + hpd-gpios: + minItems: 1 + description: + References to the GPIOs that control the HDMI hot-plug detection pins, + one per HDMI input. The active flag indicates the GPIO level that + enables hot-plug detection. + + default-input: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: + Select which input is selected after reset. + + ports: true + +required: + - compatible + - reg + - ports + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: adi,adv7611 + then: + properties: + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input port + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Output port + + required: + - port@1 + + - if: + properties: + compatible: + contains: + const: adi,adv7612 + then: + properties: + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Output port + + patternProperties: + "^port@[0-1]$": + $ref: /schemas/graph.yaml#/properties/port + description: Input port + + required: + - port@2 + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_receiver@4c { + compatible = "adi,adv7611"; + /* + * The edid page will be accessible @ 0x66 on the I2C bus. All + * other maps will retain their default addresses. + */ + reg = <0x4c>, <0x66>; + reg-names = "main", "edid"; + + reset-gpios = <&ioexp 0 GPIO_ACTIVE_LOW>; + hpd-gpios = <&ioexp 2 GPIO_ACTIVE_HIGH>; + default-input = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + hdmi_in: endpoint { + remote-endpoint = <&ccdc_in>; + }; + }; + }; + + + }; + }; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/adv7180.yaml b/sys/contrib/device-tree/Bindings/media/i2c/adv7180.yaml index c8d887eee3bb..9ee1483775f6 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/adv7180.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/adv7180.yaml @@ -39,10 +39,20 @@ properties: maxItems: 1 adv,force-bt656-4: + deprecated: true description: Indicates that the output is a BT.656-4 compatible stream. type: boolean + adi,force-bt656-4: + description: + Indicates that the output is a BT.656-4 compatible stream. + type: boolean + + interrupts: + items: + - description: The GPIO connected to the INTRQ pin. + port: $ref: /schemas/graph.yaml#/$defs/port-base unevaluatedProperties: false diff --git a/sys/contrib/device-tree/Bindings/media/i2c/aptina,mt9v032.txt b/sys/contrib/device-tree/Bindings/media/i2c/aptina,mt9v032.txt new file mode 100644 index 000000000000..100f0ae43269 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/aptina,mt9v032.txt @@ -0,0 +1,41 @@ +* Aptina 1/3-Inch WVGA CMOS Digital Image Sensor + +The Aptina MT9V032 is a 1/3-inch CMOS active pixel digital image sensor with +an active array size of 752H x 480V. It is programmable through a simple +two-wire serial interface. + +Required Properties: + +- compatible: value should be either one among the following + (a) "aptina,mt9v022" for MT9V022 color sensor + (b) "aptina,mt9v022m" for MT9V022 monochrome sensor + (c) "aptina,mt9v024" for MT9V024 color sensor + (d) "aptina,mt9v024m" for MT9V024 monochrome sensor + (e) "aptina,mt9v032" for MT9V032 color sensor + (f) "aptina,mt9v032m" for MT9V032 monochrome sensor + (g) "aptina,mt9v034" for MT9V034 color sensor + (h) "aptina,mt9v034m" for MT9V034 monochrome sensor + +Optional Properties: + +- link-frequencies: List of allowed link frequencies in Hz. Each frequency is + expressed as a 64-bit big-endian integer. +- reset-gpios: GPIO handle which is connected to the reset pin of the chip. +- standby-gpios: GPIO handle which is connected to the standby pin of the chip. + +For further reading on port node refer to +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + + mt9v032@5c { + compatible = "aptina,mt9v032"; + reg = <0x5c>; + + port { + mt9v032_out: endpoint { + link-frequencies = /bits/ 64 + <13000000 26600000 27000000>; + }; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/hynix,hi846.yaml b/sys/contrib/device-tree/Bindings/media/i2c/hynix,hi846.yaml index 60f19e1152b3..1a57f2aa1982 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/hynix,hi846.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/hynix,hi846.yaml @@ -28,12 +28,6 @@ properties: items: - description: Reference to the mclk clock. - assigned-clocks: - maxItems: 1 - - assigned-clock-rates: - maxItems: 1 - reset-gpios: description: Reference to the GPIO connected to the RESETB pin. Active low. maxItems: 1 @@ -82,8 +76,6 @@ required: - compatible - reg - clocks - - assigned-clocks - - assigned-clock-rates - vddio-supply - vdda-supply - vddd-supply @@ -105,8 +97,6 @@ examples: pinctrl-names = "default"; pinctrl-0 = <&pinctrl_csi1>; clocks = <&clk 0>; - assigned-clocks = <&clk 0>; - assigned-clock-rates = <25000000>; vdda-supply = <®_camera_vdda>; vddd-supply = <®_camera_vddd>; vddio-supply = <®_camera_vddio>; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/maxim,max2175.txt b/sys/contrib/device-tree/Bindings/media/i2c/maxim,max2175.txt new file mode 100644 index 000000000000..02b4e9cd7b1b --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/maxim,max2175.txt @@ -0,0 +1,59 @@ +Maxim Integrated MAX2175 RF to Bits tuner +----------------------------------------- + +The MAX2175 IC is an advanced analog/digital hybrid-radio receiver with +RF to Bits® front-end designed for software-defined radio solutions. + +Required properties: +-------------------- +- compatible: "maxim,max2175" for MAX2175 RF-to-bits tuner. +- clocks: clock specifier. +- port: child port node corresponding to the I2S output, in accordance with + the video interface bindings defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. The port + node must contain at least one endpoint. + +Optional properties: +-------------------- +- maxim,master : phandle to the master tuner if it is a slave. This + is used to define two tuners in diversity mode + (1 master, 1 slave). By default each tuner is an + individual master. +- maxim,refout-load : load capacitance value (in picofarads) on reference + output drive level. The possible load values are: + 0 (default - refout disabled) + 10 + 20 + 30 + 40 + 60 + 70 +- maxim,am-hiz-filter : empty property indicates the AM Hi-Z filter is used + in this hardware for AM antenna input. + +Example: +-------- + +Board specific DTS file + +/* Fixed XTAL clock node */ +maxim_xtal: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <36864000>; +}; + +/* A tuner device instance under i2c bus */ +max2175_0: tuner@60 { + compatible = "maxim,max2175"; + reg = <0x60>; + clocks = <&maxim_xtal>; + maxim,refout-load = <10>; + + port { + max2175_0_ep: endpoint { + remote-endpoint = <&slave_rx_device>; + }; + }; + +}; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/maxim,max96712.yaml b/sys/contrib/device-tree/Bindings/media/i2c/maxim,max96712.yaml index 6c72e77b927c..26f85151afbd 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/maxim,max96712.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/maxim,max96712.yaml @@ -25,7 +25,10 @@ description: | properties: compatible: - const: maxim,max96712 + items: + - enum: + - maxim,max96712 + - maxim,max96724 reg: description: I2C device address diff --git a/sys/contrib/device-tree/Bindings/media/i2c/micron,mt9m111.txt b/sys/contrib/device-tree/Bindings/media/i2c/micron,mt9m111.txt new file mode 100644 index 000000000000..d0bed6fa901a --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/micron,mt9m111.txt @@ -0,0 +1,37 @@ +Micron 1.3Mp CMOS Digital Image Sensor + +The Micron MT9M111 is a CMOS active pixel digital image sensor with an active +array size of 1280H x 1024V. It is programmable through a simple two-wire serial +interface. + +Required Properties: +- compatible: value should be "micron,mt9m111" +- clocks: reference to the master clock. +- clock-names: shall be "mclk". + +The device node must contain one 'port' child node with one 'endpoint' child +sub-node for its digital output video port, in accordance with the video +interface bindings defined in: +Documentation/devicetree/bindings/media/video-interfaces.txt + +Optional endpoint properties: +- pclk-sample: For information see ../video-interfaces.txt. The value is set to + 0 if it isn't specified. + +Example: + + i2c_master { + mt9m111@5d { + compatible = "micron,mt9m111"; + reg = <0x5d>; + clocks = <&mclk>; + clock-names = "mclk"; + + port { + mt9m111_1: endpoint { + remote-endpoint = <&pxa_camera>; + pclk-sample = <1>; + }; + }; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/mipi-ccs.yaml b/sys/contrib/device-tree/Bindings/media/i2c/mipi-ccs.yaml index f8ace8cbccdb..bc664a016396 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/mipi-ccs.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/mipi-ccs.yaml @@ -23,6 +23,9 @@ description: More detailed documentation can be found in Documentation/devicetree/bindings/media/video-interfaces.txt . +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + properties: compatible: oneOf: @@ -58,16 +61,10 @@ properties: documentation. maxItems: 1 - flash-leds: - description: Flash LED phandles. See ../video-interfaces.txt for details. - - lens-focus: - description: Lens focus controller phandles. See ../video-interfaces.txt - for details. + flash-leds: true + lens-focus: true rotation: - description: Rotation of the sensor. See ../video-interfaces.txt for - details. enum: [ 0, 180 ] port: diff --git a/sys/contrib/device-tree/Bindings/media/i2c/nxp,tda1997x.txt b/sys/contrib/device-tree/Bindings/media/i2c/nxp,tda1997x.txt new file mode 100644 index 000000000000..e76167999d76 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/nxp,tda1997x.txt @@ -0,0 +1,178 @@ +Device-Tree bindings for the NXP TDA1997x HDMI receiver + +The TDA19971/73 are HDMI video receivers. + +The TDA19971 Video port output pins can be used as follows: + - RGB 8bit per color (24 bits total): R[11:4] B[11:4] G[11:4] + - YUV444 8bit per color (24 bits total): Y[11:4] Cr[11:4] Cb[11:4] + - YUV422 semi-planar 8bit per component (16 bits total): Y[11:4] CbCr[11:4] + - YUV422 semi-planar 10bit per component (20 bits total): Y[11:2] CbCr[11:2] + - YUV422 semi-planar 12bit per component (24 bits total): - Y[11:0] CbCr[11:0] + - YUV422 BT656 8bit per component (8 bits total): YCbCr[11:4] (2-cycles) + - YUV422 BT656 10bit per component (10 bits total): YCbCr[11:2] (2-cycles) + - YUV422 BT656 12bit per component (12 bits total): YCbCr[11:0] (2-cycles) + +The TDA19973 Video port output pins can be used as follows: + - RGB 12bit per color (36 bits total): R[11:0] B[11:0] G[11:0] + - YUV444 12bit per color (36 bits total): Y[11:0] Cb[11:0] Cr[11:0] + - YUV422 semi-planar 12bit per component (24 bits total): Y[11:0] CbCr[11:0] + - YUV422 BT656 12bit per component (12 bits total): YCbCr[11:0] (2-cycles) + +The Video port output pins are mapped via 4-bit 'pin groups' allowing +for a variety of connection possibilities including swapping pin order within +pin groups. The video_portcfg device-tree property consists of register mapping +pairs which map a chip-specific VP output register to a 4-bit pin group. If +the pin group needs to be bit-swapped you can use the *_S pin-group defines. + +Required Properties: + - compatible : + - "nxp,tda19971" for the TDA19971 + - "nxp,tda19973" for the TDA19973 + - reg : I2C slave address + - interrupts : The interrupt number + - DOVDD-supply : Digital I/O supply + - DVDD-supply : Digital Core supply + - AVDD-supply : Analog supply + - nxp,vidout-portcfg : array of pairs mapping VP output pins to pin groups. + +Optional Properties: + - nxp,audout-format : DAI bus format: "i2s" or "spdif". + - nxp,audout-width : width of audio output data bus (1-4). + - nxp,audout-layout : data layout (0=AP0 used, 1=AP0/AP1/AP2/AP3 used). + - nxp,audout-mclk-fs : Multiplication factor between stream rate and codec + mclk. + +The port node shall contain one endpoint child node for its digital +output video port, in accordance with the video interface bindings defined in +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Optional Endpoint Properties: + The following three properties are defined in video-interfaces.txt and + are valid for the output parallel bus endpoint: + - hsync-active: Horizontal synchronization polarity. Defaults to active high. + - vsync-active: Vertical synchronization polarity. Defaults to active high. + - data-active: Data polarity. Defaults to active high. + +Examples: + - VP[15:0] connected to IMX6 CSI_DATA[19:4] for 16bit YUV422 + 16bit I2S layout0 with a 128*fs clock (A_WS, AP0, A_CLK pins) + hdmi-receiver@48 { + compatible = "nxp,tda19971"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tda1997x>; + reg = <0x48>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + DOVDD-supply = <®_3p3v>; + AVDD-supply = <®_1p8v>; + DVDD-supply = <®_1p8v>; + /* audio */ + #sound-dai-cells = <0>; + nxp,audout-format = "i2s"; + nxp,audout-layout = <0>; + nxp,audout-width = <16>; + nxp,audout-mclk-fs = <128>; + /* + * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4] + * and Y[11:4] across 16bits in the same pixclk cycle. + */ + nxp,vidout-portcfg = + /* Y[11:8]<->VP[15:12]<->CSI_DATA[19:16] */ + < TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >, + /* Y[7:4]<->VP[11:08]<->CSI_DATA[15:12] */ + < TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >, + /* CbCc[11:8]<->VP[07:04]<->CSI_DATA[11:8] */ + < TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >, + /* CbCr[7:4]<->VP[03:00]<->CSI_DATA[7:4] */ + < TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >; + + port { + tda1997x_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-width = <16>; + hsync-active = <1>; + vsync-active = <1>; + data-active = <1>; + }; + }; + }; + - VP[15:8] connected to IMX6 CSI_DATA[19:12] for 8bit BT656 + 16bit I2S layout0 with a 128*fs clock (A_WS, AP0, A_CLK pins) + hdmi-receiver@48 { + compatible = "nxp,tda19971"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tda1997x>; + reg = <0x48>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + DOVDD-supply = <®_3p3v>; + AVDD-supply = <®_1p8v>; + DVDD-supply = <®_1p8v>; + /* audio */ + #sound-dai-cells = <0>; + nxp,audout-format = "i2s"; + nxp,audout-layout = <0>; + nxp,audout-width = <16>; + nxp,audout-mclk-fs = <128>; + /* + * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4] + * and Y[11:4] across 16bits in the same pixclk cycle. + */ + nxp,vidout-portcfg = + /* Y[11:8]<->VP[15:12]<->CSI_DATA[19:16] */ + < TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >, + /* Y[7:4]<->VP[11:08]<->CSI_DATA[15:12] */ + < TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >, + /* CbCc[11:8]<->VP[07:04]<->CSI_DATA[11:8] */ + < TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >, + /* CbCr[7:4]<->VP[03:00]<->CSI_DATA[7:4] */ + < TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >; + + port { + tda1997x_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-width = <16>; + hsync-active = <1>; + vsync-active = <1>; + data-active = <1>; + }; + }; + }; + - VP[15:8] connected to IMX6 CSI_DATA[19:12] for 8bit BT656 + 16bit I2S layout0 with a 128*fs clock (A_WS, AP0, A_CLK pins) + hdmi-receiver@48 { + compatible = "nxp,tda19971"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tda1997x>; + reg = <0x48>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + DOVDD-supply = <®_3p3v>; + AVDD-supply = <®_1p8v>; + DVDD-supply = <®_1p8v>; + /* audio */ + #sound-dai-cells = <0>; + nxp,audout-format = "i2s"; + nxp,audout-layout = <0>; + nxp,audout-width = <16>; + nxp,audout-mclk-fs = <128>; + /* + * The 8bpp BT656 mode outputs YCbCr[11:4] across 8bits over + * 2 pixclk cycles. + */ + nxp,vidout-portcfg = + /* YCbCr[11:8]<->VP[15:12]<->CSI_DATA[19:16] */ + < TDA1997X_VP24_V15_12 TDA1997X_R_CR_CBCR_11_8 >, + /* YCbCr[7:4]<->VP[11:08]<->CSI_DATA[15:12] */ + < TDA1997X_VP24_V11_08 TDA1997X_R_CR_CBCR_7_4 >, + + port { + tda1997x_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-width = <16>; + hsync-active = <1>; + vsync-active = <1>; + data-active = <1>; + }; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/onnn,mt9m001.txt b/sys/contrib/device-tree/Bindings/media/i2c/onnn,mt9m001.txt new file mode 100644 index 000000000000..c920552b03ef --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/onnn,mt9m001.txt @@ -0,0 +1,38 @@ +MT9M001: 1/2-Inch Megapixel Digital Image Sensor + +The MT9M001 is an SXGA-format with a 1/2-inch CMOS active-pixel digital +image sensor. It is programmable through I2C interface. + +Required Properties: + +- compatible: shall be "onnn,mt9m001". +- clocks: reference to the master clock into sensor + +Optional Properties: + +- reset-gpios: GPIO handle which is connected to the reset pin of the chip. + Active low. +- standby-gpios: GPIO handle which is connected to the standby pin of the chip. + Active high. + +The device node must contain one 'port' child node with one 'endpoint' child +sub-node for its digital output video port, in accordance with the video +interface bindings defined in: +Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + + &i2c1 { + camera-sensor@5d { + compatible = "onnn,mt9m001"; + reg = <0x5d>; + reset-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + standby-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + clocks = <&camera_clk>; + port { + mt9m001_out: endpoint { + remote-endpoint = <&vcap_in>; + }; + }; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/onnn,mt9m114.yaml b/sys/contrib/device-tree/Bindings/media/i2c/onnn,mt9m114.yaml index f6b87892068a..a89f740214f7 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/onnn,mt9m114.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/onnn,mt9m114.yaml @@ -70,6 +70,15 @@ properties: - bus-type - link-frequencies + slew-rate: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Slew rate ot the output pads DOUT[7:0], LINE_VALID, FRAME_VALID and + PIXCLK. Higher values imply steeper voltage-flanks on the pads. + minimum: 0 + maximum: 7 + default: 7 + required: - compatible - reg diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov02e10.yaml b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov02e10.yaml new file mode 100644 index 000000000000..03d476bcf805 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov02e10.yaml @@ -0,0 +1,152 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) 2025 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov02e10.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Omnivision OV02E10 CMOS Sensor + +maintainers: + - Bryan O'Donoghue <bryan.odonoghue@linaro.org> + +description: | + The Omnivision OV02E10 and OV02C10 sensors are 2 megapixel, CMOS image sensors which support: + - Automatic black level calibration (ABLC) + - Programmable controls for frame rate, mirror and flip, binning, cropping + and windowing + - OVO2C10 + - 10 bit RAW Bayer 1920x1080 60 fps 2-lane @ 800 Mbps/lane + - 10 bit RAW Bayer 1920x1080 60 fps 1-lane @ 1500 Mbps/lane + - 10 bit RAW Bayer 1280x720 60 fps cropped 1-lane @ 960 Mbps/lane + - 10 bit RGB/BW 640x480 60 fps bin2 or skip2 1-lane @ 800 Mbps/lane + - 10 bit RGB/BW 480x270 60 fps bin4 or skip4 1-lane @ 800 Mbps/lane + - OV02E10 + - 10 bit RAW Bayer 1920x1088 60 fps 2-lane @ 720 Mbps/lane + - 10 bit RAW Bayer 1280x1080 60 fps 2-lane @ 720 Mbps/lane + - 10 bit Quad Bayer 960x540 60 fps 2-lane 360 Mbps/lane + - 8 bit Quad Bayer 480x270 1/3/5/10 fps sub2 288 Mbps/lane + - 8 bit Quad Bayer 232x132 1/3/5/10 fps sub4 144 Mbps/lane + - Dynamic defect pixel cancellation + - Standard SCCB command interface + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +properties: + compatible: + enum: + - ovti,ov02c10 + - ovti,ov02e10 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + avdd-supply: + description: Analogue circuit voltage supply. + + dovdd-supply: + description: I/O circuit voltage supply. + + dvdd-supply: + description: Digital circuit voltage supply. + + reset-gpios: + description: Active low GPIO connected to XSHUTDOWN pad of the sensor. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + additionalProperties: false + + properties: + data-lanes: + items: + - const: 1 + - const: 2 + link-frequencies: true + remote-endpoint: true + + required: + - data-lanes + - link-frequencies + - remote-endpoint + +required: + - compatible + - reg + - clocks + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ov02e10: camera@10 { + compatible = "ovti,ov02e10"; + reg = <0x10>; + + reset-gpios = <&tlmm 237 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cam_rgb_defaultt>; + + clocks = <&ov02e10_clk>; + + assigned-clocks = <&ov02e10_clk>; + assigned-clock-parents = <&ov02e10_clk_parent>; + assigned-clock-rates = <19200000>; + + avdd-supply = <&vreg_l7b_2p8>; + dvdd-supply = <&vreg_l7b_1p8>; + dovdd-supply = <&vreg_l3m_1p8>; + + port { + ov02e10_ep: endpoint { + remote-endpoint = <&csiphy4_ep>; + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <400000000>; + }; + }; + }; + + ov02c10: camera@36 { + compatible = "ovti,ov02c10"; + reg = <0x36>; + + reset-gpios = <&tlmm 237 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cam_rgb_defaultt>; + + clocks = <&ov02c10_clk>; + + assigned-clocks = <&ov02c10_clk>; + assigned-clock-parents = <&ov02c10_clk_parent>; + assigned-clock-rates = <19200000>; + + avdd-supply = <&vreg_l7b_2p8>; + dvdd-supply = <&vreg_l7b_1p8>; + dovdd-supply = <&vreg_l3m_1p8>; + + port { + ov02c10_ep: endpoint { + remote-endpoint = <&csiphy4_ep>; + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <400000000>; + }; + }; + }; + }; +... diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov08x40.yaml b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov08x40.yaml new file mode 100644 index 000000000000..552efdf8934f --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov08x40.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) 2024 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov08x40.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Omnivision OV08X40 CMOS Sensor + +maintainers: + - Bryan O'Donoghue <bryan.odonoghue@linaro.org> + +description: | + The Omnivision OV08X40 is a 9.2 megapixel, CMOS image sensor which supports: + - Automatic black level calibration (ABLC) + - Programmable controls for frame rate, mirror and flip, binning, cropping + and windowing + - Output formats 10-bit 4C RGB RAW, 10-bit Bayer RAW + - 4-lane MIPI D-PHY TX @ 1 Gbps per lane + - 2-lane MPIP D-PHY TX @ 2 Gbps per lane + - Dynamic defect pixel cancellation + - Standard SCCB command interface + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +properties: + compatible: + const: ovti,ov08x40 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + avdd-supply: + description: Analogue circuit voltage supply. + + dovdd-supply: + description: I/O circuit voltage supply. + + dvdd-supply: + description: Digital circuit voltage supply. + + reset-gpios: + description: Active low GPIO connected to XSHUTDOWN pad of the sensor. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + additionalProperties: false + + properties: + data-lanes: + oneOf: + - items: + - const: 1 + - const: 2 + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + link-frequencies: true + remote-endpoint: true + + required: + - data-lanes + - link-frequencies + - remote-endpoint + +required: + - compatible + - reg + - clocks + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ov08x40: camera@36 { + compatible = "ovti,ov08x40"; + reg = <0x36>; + + reset-gpios = <&tlmm 111 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cam_rgb_defaultt>; + + clocks = <&ov08x40_clk>; + + assigned-clocks = <&ov08x40_clk>; + assigned-clock-parents = <&ov08x40_clk_parent>; + assigned-clock-rates = <19200000>; + + avdd-supply = <&vreg_l7b_2p8>; + dvdd-supply = <&vreg_l7b_1p8>; + dovdd-supply = <&vreg_l3m_1p8>; + + port { + ov08x40_ep: endpoint { + remote-endpoint = <&csiphy4_ep>; + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <400000000>; + }; + }; + }; + }; +... diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov2640.txt b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov2640.txt new file mode 100644 index 000000000000..989ce6cb6ac3 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov2640.txt @@ -0,0 +1,41 @@ +* Omnivision OV2640 CMOS sensor + +The Omnivision OV2640 sensor supports multiple resolutions output, such as +CIF, SVGA, UXGA. It also can support the YUV422/420, RGB565/555 or raw RGB +output formats. + +Required Properties: +- compatible: should be "ovti,ov2640" +- clocks: reference to the xvclk input clock. +- clock-names: should be "xvclk". + +Optional Properties: +- resetb-gpios: reference to the GPIO connected to the resetb pin, if any. +- pwdn-gpios: reference to the GPIO connected to the pwdn pin, if any. + +The device node must contain one 'port' child node for its digital output +video port, in accordance with the video interface bindings defined in +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + + i2c1: i2c@f0018000 { + ov2640: camera@30 { + compatible = "ovti,ov2640"; + reg = <0x30>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; + resetb-gpios = <&pioE 11 GPIO_ACTIVE_LOW>; + pwdn-gpios = <&pioE 13 GPIO_ACTIVE_HIGH>; + clocks = <&pck0>; + clock-names = "xvclk"; + assigned-clocks = <&pck0>; + assigned-clock-rates = <25000000>; + + port { + ov2640_0: endpoint { + remote-endpoint = <&isi_0>; + }; + }; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov2659.txt b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov2659.txt new file mode 100644 index 000000000000..92989a619f29 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov2659.txt @@ -0,0 +1,47 @@ +* OV2659 1/5-Inch 2Mp SOC Camera + +The Omnivision OV2659 is a 1/5-inch SOC camera, with an active array size of +1632H x 1212V. It is programmable through a SCCB. The OV2659 sensor supports +multiple resolutions output, such as UXGA, SVGA, 720p. It also can support +YUV422, RGB565/555 or raw RGB output formats. + +Required Properties: +- compatible: Must be "ovti,ov2659" +- reg: I2C slave address +- clocks: reference to the xvclk input clock. +- clock-names: should be "xvclk". +- link-frequencies: target pixel clock frequency. + +Optional Properties: +- powerdown-gpios: reference to the GPIO connected to the pwdn pin, if any. + Active high with internal pull down resistor. +- reset-gpios: reference to the GPIO connected to the resetb pin, if any. + Active low with internal pull up resistor. + +For further reading on port node refer to +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + + i2c0@1c22000 { + ... + ... + ov2659@30 { + compatible = "ovti,ov2659"; + reg = <0x30>; + + clocks = <&clk_ov2659 0>; + clock-names = "xvclk"; + + powerdown-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; + + port { + ov2659_0: endpoint { + remote-endpoint = <&vpfe_ep>; + link-frequencies = /bits/ 64 <70000000>; + }; + }; + }; + ... + }; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov5648.yaml b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov5648.yaml index 1f497679168c..8028c8b107c4 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov5648.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov5648.yaml @@ -20,12 +20,6 @@ properties: items: - description: XVCLK Clock - assigned-clocks: - maxItems: 1 - - assigned-clock-rates: - maxItems: 1 - dvdd-supply: description: Digital Domain Power Supply @@ -68,8 +62,6 @@ required: - compatible - reg - clocks - - assigned-clocks - - assigned-clock-rates - dvdd-supply - dovdd-supply - port @@ -93,9 +85,6 @@ examples: avdd-supply = <&ov5648_avdd>; dovdd-supply = <&ov5648_dovdd>; clocks = <&ov5648_xvclk 0>; - assigned-clocks = <&ov5648_xvclk 0>; - assigned-clock-rates = <24000000>; - ov5648_out: port { ov5648_out_mipi_csi2: endpoint { diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov7670.txt b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov7670.txt new file mode 100644 index 000000000000..2c972a56f3cb --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov7670.txt @@ -0,0 +1,55 @@ +* Omnivision OV7670 CMOS sensor + +The Omnivision OV7670 sensor supports multiple resolutions output, such as +CIF, SVGA, UXGA. It also can support the YUV422/420, RGB565/555 or raw RGB +output formats. + +Required Properties: +- compatible: should be "ovti,ov7670" +- clocks: reference to the xclk input clock. +- clock-names: should be "xclk". + +Required Endpoint Properties: +- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively. +- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively. + +Optional Properties: +- reset-gpios: reference to the GPIO connected to the resetb pin, if any. + Active is low. +- powerdown-gpios: reference to the GPIO connected to the pwdn pin, if any. + Active is high. +- ov7670,pclk-hb-disable: a boolean property to suppress pixel clock output + signal during horizontal blankings. + +The device node must contain one 'port' child node with one 'endpoint' child +sub-node for its digital output video port, in accordance with the video +interface bindings defined in: +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + + i2c1: i2c@f0018000 { + ov7670: camera@21 { + compatible = "ovti,ov7670"; + reg = <0x21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; + reset-gpios = <&pioE 11 GPIO_ACTIVE_LOW>; + powerdown-gpios = <&pioE 13 GPIO_ACTIVE_HIGH>; + clocks = <&pck0>; + clock-names = "xclk"; + assigned-clocks = <&pck0>; + assigned-clock-rates = <25000000>; + + ov7670,pclk-hb-disable; + + port { + ov7670_0: endpoint { + hsync-active = <0>; + vsync-active = <0>; + + remote-endpoint = <&isi_0>; + }; + }; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov7740.txt b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov7740.txt new file mode 100644 index 000000000000..af781c3a5f0e --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov7740.txt @@ -0,0 +1,47 @@ +* Omnivision OV7740 CMOS image sensor + +The Omnivision OV7740 image sensor supports multiple output image +size, such as VGA, and QVGA, CIF and any size smaller. It also +supports the RAW RGB and YUV output formats. + +The common video interfaces bindings (see video-interfaces.txt) should +be used to specify link to the image data receiver. The OV7740 device +node should contain one 'port' child node with an 'endpoint' subnode. + +Required Properties: +- compatible: "ovti,ov7740". +- reg: I2C slave address of the sensor. +- clocks: Reference to the xvclk input clock. +- clock-names: "xvclk". + +Optional Properties: +- reset-gpios: Rreference to the GPIO connected to the reset_b pin, + if any. Active low with pull-ip resistor. +- powerdown-gpios: Reference to the GPIO connected to the pwdn pin, + if any. Active high with pull-down resistor. + +Endpoint node mandatory properties: +- remote-endpoint: A phandle to the bus receiver's endpoint node. + +Example: + + i2c1: i2c@fc028000 { + ov7740: camera@21 { + compatible = "ovti,ov7740"; + reg = <0x21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sensor_power &pinctrl_sensor_reset>; + clocks = <&isc>; + clock-names = "xvclk"; + assigned-clocks = <&isc>; + assigned-clock-rates = <24000000>; + reset-gpios = <&pioA 43 GPIO_ACTIVE_LOW>; + powerdown-gpios = <&pioA 44 GPIO_ACTIVE_HIGH>; + + port { + ov7740_0: endpoint { + remote-endpoint = <&isc_0>; + }; + }; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov8858.yaml b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov8858.yaml index a65f921ec0fd..491f2931e6bc 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov8858.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov8858.yaml @@ -15,6 +15,8 @@ description: | controlled through an I2C-compatible SCCB bus. The sensor transmits images on a MIPI CSI-2 output interface with up to 4 data lanes. +$ref: /schemas/media/video-interface-devices.yaml# + properties: compatible: const: ovti,ov8858 @@ -69,7 +71,7 @@ required: - clocks - port -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov8865.yaml b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov8865.yaml index 8a70e23ba6ab..320b9aacbb8b 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov8865.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov8865.yaml @@ -20,12 +20,6 @@ properties: items: - description: EXTCLK Clock - assigned-clocks: - maxItems: 1 - - assigned-clock-rates: - maxItems: 1 - dvdd-supply: description: Digital Domain Power Supply @@ -68,8 +62,6 @@ required: - compatible - reg - clocks - - assigned-clocks - - assigned-clock-rates - dvdd-supply - avdd-supply - dovdd-supply @@ -94,8 +86,6 @@ examples: pinctrl-0 = <&csi_mclk_pin>; clocks = <&ccu CLK_CSI_MCLK>; - assigned-clocks = <&ccu CLK_CSI_MCLK>; - assigned-clock-rates = <24000000>; avdd-supply = <®_ov8865_avdd>; dovdd-supply = <®_ov8865_dovdd>; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov9282.yaml b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov9282.yaml index 79a7658f6d05..401c8613f840 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov9282.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov9282.yaml @@ -27,10 +27,6 @@ properties: description: I2C address maxItems: 1 - assigned-clocks: true - assigned-clock-parents: true - assigned-clock-rates: true - clocks: description: Clock frequency from 6 to 27MHz maxItems: 1 @@ -87,10 +83,6 @@ examples: reg = <0x60>; clocks = <&ov9282_clk>; - assigned-clocks = <&ov9282_clk>; - assigned-clock-parents = <&ov9282_clk_parent>; - assigned-clock-rates = <24000000>; - port { ov9282: endpoint { remote-endpoint = <&cam>; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov9650.txt b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov9650.txt new file mode 100644 index 000000000000..506dfc52872a --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/ovti,ov9650.txt @@ -0,0 +1,36 @@ +* Omnivision OV9650/OV9652 CMOS sensor + +Required Properties: +- compatible: shall be one of + "ovti,ov9650" + "ovti,ov9652" +- clocks: reference to the xvclk input clock. + +Optional Properties: +- reset-gpios: reference to the GPIO connected to the resetb pin, if any. + Active is high. +- powerdown-gpios: reference to the GPIO connected to the pwdn pin, if any. + Active is high. + +The device node shall contain one 'port' child node with one child 'endpoint' +subnode for its digital output video port, in accordance with the video +interface bindings defined in Documentation/devicetree/bindings/media/ +video-interfaces.txt. + +Example: + +&i2c0 { + ov9650: camera@30 { + compatible = "ovti,ov9650"; + reg = <0x30>; + reset-gpios = <&axi_gpio_0 0 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&axi_gpio_0 1 GPIO_ACTIVE_HIGH>; + clocks = <&xclk>; + + port { + ov9650_0: endpoint { + remote-endpoint = <&vcap1_in0>; + }; + }; + }; +}; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/sony,imx214.yaml b/sys/contrib/device-tree/Bindings/media/i2c/sony,imx214.yaml index 0162eec8ca99..aea99ebf8e9e 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/sony,imx214.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/sony,imx214.yaml @@ -33,20 +33,21 @@ properties: clock-frequency: description: Frequency of the xclk clock in Hz. + deprecated: true enable-gpios: description: GPIO descriptor for the enable pin. maxItems: 1 - vdddo-supply: - description: Chip digital IO regulator (1.8V). - vdda-supply: description: Chip analog regulator (2.7V). vddd-supply: description: Chip digital core regulator (1.12V). + vdddo-supply: + description: Chip digital IO regulator (1.8V). + flash-leds: true lens-focus: true @@ -84,11 +85,10 @@ required: - compatible - reg - clocks - - clock-frequency - enable-gpios - - vdddo-supply - vdda-supply - vddd-supply + - vdddo-supply - port unevaluatedProperties: false @@ -104,22 +104,25 @@ examples: camera-sensor@1a { compatible = "sony,imx214"; reg = <0x1a>; - vdddo-supply = <&pm8994_lvs1>; - vddd-supply = <&camera_vddd_1v12>; + + clocks = <&camera_clk>; + assigned-clocks = <&camera_clk>; + assigned-clock-rates = <24000000>; + + enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>; + vdda-supply = <&pm8994_l17>; + vddd-supply = <&camera_vddd_1v12>; + vdddo-supply = <&pm8994_lvs1>; + lens-focus = <&ad5820>; - enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>; - clocks = <&camera_clk>; - clock-frequency = <24000000>; port { imx214_ep: endpoint { data-lanes = <1 2 3 4>; - link-frequencies = /bits/ 64 <480000000>; + link-frequencies = /bits/ 64 <600000000>; remote-endpoint = <&csiphy0_ep>; }; }; }; }; - -... diff --git a/sys/contrib/device-tree/Bindings/media/i2c/sony,imx219.yaml b/sys/contrib/device-tree/Bindings/media/i2c/sony,imx219.yaml new file mode 100644 index 000000000000..38c3759bcd9f --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/sony,imx219.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/sony,imx219.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony 1/4.0-Inch 8Mpixel CMOS Digital Image Sensor + +maintainers: + - Dave Stevenson <dave.stevenson@raspberrypi.com> + +description: |- + The Sony imx219 is a 1/4.0-inch CMOS active pixel digital image sensor + with an active array size of 3280H x 2464V. It is programmable through + I2C interface. The I2C address is fixed to 0x10 as per sensor data sheet. + Image data is sent through MIPI CSI-2, which is configured as either 2 or + 4 data lanes. + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +properties: + compatible: + const: sony,imx219 + + reg: + description: I2C device address + maxItems: 1 + + clocks: + maxItems: 1 + + VDIG-supply: + description: + Digital I/O voltage supply, 1.8 volts + + VANA-supply: + description: + Analog voltage supply, 2.8 volts + + VDDL-supply: + description: + Digital core voltage supply, 1.2 volts + + reset-gpios: + maxItems: 1 + description: |- + Reference to the GPIO connected to the xclr pin, if any. + Must be released (set high) after all supplies are applied. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: |- + The sensor supports either two-lane, or four-lane operation. + If this property is omitted four-lane operation is assumed. + For two-lane operation the property must be set to <1 2>. + items: + - const: 1 + - const: 2 + + clock-noncontinuous: true + link-frequencies: true + + required: + - link-frequencies + +required: + - compatible + - reg + - clocks + - VANA-supply + - VDIG-supply + - VDDL-supply + - port + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + imx219: sensor@10 { + compatible = "sony,imx219"; + reg = <0x10>; + clocks = <&imx219_clk>; + VANA-supply = <&imx219_vana>; /* 2.8v */ + VDIG-supply = <&imx219_vdig>; /* 1.8v */ + VDDL-supply = <&imx219_vddl>; /* 1.2v */ + + port { + imx219_0: endpoint { + remote-endpoint = <&csi1_ep>; + data-lanes = <1 2>; + clock-noncontinuous; + link-frequencies = /bits/ 64 <456000000>; + }; + }; + }; + }; + +... diff --git a/sys/contrib/device-tree/Bindings/media/i2c/sony,imx258.yaml b/sys/contrib/device-tree/Bindings/media/i2c/sony,imx258.yaml index c978abc0cdb3..421b935b52bc 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/sony,imx258.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/sony,imx258.yaml @@ -18,16 +18,14 @@ description: |- The camera module does not expose the model through registers, so the exact model needs to be specified. +$ref: /schemas/media/video-interface-devices.yaml# + properties: compatible: enum: - sony,imx258 - sony,imx258-pdaf - assigned-clocks: true - assigned-clock-parents: true - assigned-clock-rates: true - clocks: description: Clock frequency from 6 to 27 MHz. @@ -85,7 +83,7 @@ required: - reg - port -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -125,9 +123,6 @@ examples: reg = <0x6c>; clocks = <&imx258_clk>; - assigned-clocks = <&imx258_clk>; - assigned-clock-rates = <19200000>; - port { endpoint { remote-endpoint = <&csi1_ep>; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/sony,imx290.yaml b/sys/contrib/device-tree/Bindings/media/i2c/sony,imx290.yaml index bf05ca48601a..990acf89af8f 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/sony,imx290.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/sony,imx290.yaml @@ -33,6 +33,8 @@ properties: - sony,imx290lqr # Colour - sony,imx290llr # Monochrome - sony,imx327lqr # Colour + - sony,imx462lqr # Colour + - sony,imx462llr # Monochrome - const: sony,imx290 deprecated: true @@ -134,7 +136,7 @@ examples: port { imx290_ep: endpoint { data-lanes = <1 2 3 4>; - link-frequencies = /bits/ 64 <445500000>; + link-frequencies = /bits/ 64 <222750000 148500000>; remote-endpoint = <&csiphy0_ep>; }; }; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/sony,imx334.yaml b/sys/contrib/device-tree/Bindings/media/i2c/sony,imx334.yaml index bce57b22f7b6..3842e5130463 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/sony,imx334.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/sony,imx334.yaml @@ -24,10 +24,6 @@ properties: description: I2C address maxItems: 1 - assigned-clocks: true - assigned-clock-parents: true - assigned-clock-rates: true - clocks: description: Clock frequency from 6 to 27 MHz, 37.125MHz, 74.25MHz maxItems: 1 @@ -74,10 +70,6 @@ examples: reg = <0x1a>; clocks = <&imx334_clk>; - assigned-clocks = <&imx334_clk>; - assigned-clock-parents = <&imx334_clk_parent>; - assigned-clock-rates = <24000000>; - port { imx334: endpoint { remote-endpoint = <&cam>; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/sony,imx335.yaml b/sys/contrib/device-tree/Bindings/media/i2c/sony,imx335.yaml index 77bf3a4ee89d..80f879b6bd01 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/sony,imx335.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/sony,imx335.yaml @@ -24,10 +24,6 @@ properties: description: I2C address maxItems: 1 - assigned-clocks: true - assigned-clock-parents: true - assigned-clock-rates: true - clocks: description: Clock frequency from 6 to 27 MHz, 37.125MHz, 74.25MHz maxItems: 1 @@ -86,10 +82,6 @@ examples: reg = <0x1a>; clocks = <&imx335_clk>; - assigned-clocks = <&imx335_clk>; - assigned-clock-parents = <&imx335_clk_parent>; - assigned-clock-rates = <24000000>; - avdd-supply = <&camera_vdda_2v9>; ovdd-supply = <&camera_vddo_1v8>; dvdd-supply = <&camera_vddd_1v2>; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/sony,imx412.yaml b/sys/contrib/device-tree/Bindings/media/i2c/sony,imx412.yaml index d9b7815650fd..5447ab0768a6 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/sony,imx412.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/sony,imx412.yaml @@ -26,10 +26,6 @@ properties: description: I2C address maxItems: 1 - assigned-clocks: true - assigned-clock-parents: true - assigned-clock-rates: true - clocks: description: Clock frequency 6MHz, 12MHz, 18MHz, 24MHz or 27MHz maxItems: 1 @@ -86,10 +82,6 @@ examples: reg = <0x1a>; clocks = <&imx412_clk>; - assigned-clocks = <&imx412_clk>; - assigned-clock-parents = <&imx412_clk_parent>; - assigned-clock-rates = <24000000>; - port { imx412: endpoint { remote-endpoint = <&cam>; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/sony,imx415.yaml b/sys/contrib/device-tree/Bindings/media/i2c/sony,imx415.yaml index 34962c5c7006..7c11e871dca6 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/sony,imx415.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/sony,imx415.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Sony IMX415 CMOS Image Sensor maintainers: - - Michael Riesch <michael.riesch@wolfvision.net> + - Michael Riesch <michael.riesch@collabora.com> description: |- The Sony IMX415 is a diagonal 6.4 mm (Type 1/2.8) CMOS active pixel type diff --git a/sys/contrib/device-tree/Bindings/media/i2c/st,st-mipid02.yaml b/sys/contrib/device-tree/Bindings/media/i2c/st,st-mipid02.yaml index b68141264c0e..4d40e75b4e1e 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/st,st-mipid02.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/st,st-mipid02.yaml @@ -71,7 +71,7 @@ properties: description: Any lane can be inverted or not. minItems: 1 - maxItems: 2 + maxItems: 3 required: - data-lanes diff --git a/sys/contrib/device-tree/Bindings/media/i2c/st,vd55g1.yaml b/sys/contrib/device-tree/Bindings/media/i2c/st,vd55g1.yaml new file mode 100644 index 000000000000..3c071e6fbea6 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/st,vd55g1.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) 2025 STMicroelectronics SA. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/st,vd55g1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics VD55G1 Global Shutter Image Sensor + +maintainers: + - Benjamin Mugnier <benjamin.mugnier@foss.st.com> + - Sylvain Petinot <sylvain.petinot@foss.st.com> + +description: |- + The STMicroelectronics VD55G1 is a global shutter image sensor with an active + array size of 804H x 704V. It is programmable through I2C interface. The I2C + address is fixed to 0x10. + + Image data is sent through MIPI CSI-2, which is configured as only 1 data + lane. The sensor provides 4 GPIOS that can be used for external LED signal + (synchronized with sensor integration periods). + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +properties: + compatible: + const: st,vd55g1 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + vcore-supply: + description: Digital core power supply (1.15V) + + vddio-supply: + description: Digital IO power supply (1.8V) + + vana-supply: + description: Analog power supply (2.8V) + + reset-gpios: + description: Sensor reset active low GPIO (XSHUTDOWN) + maxItems: 1 + + st,leds: + description: + List sensor's GPIOs used to control strobe light sources during exposure + time. The numbers identify the sensor pin on which the illumination + system is connected. GPIOs are active-high. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + items: + minimum: 0 + maximum: 3 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + items: + - const: 1 + + link-frequencies: + maxItems: 1 + items: + minimum: 125000000 + maximum: 600000000 + + lane-polarities: + minItems: 1 + maxItems: 2 + + required: + - data-lanes + - link-frequencies + +required: + - compatible + - reg + - clocks + - vcore-supply + - vddio-supply + - vana-supply + - reset-gpios + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera-sensor@10 { + compatible = "st,vd55g1"; + reg = <0x10>; + + clocks = <&camera_clk_12M>; + + vcore-supply = <&camera_vcore_v1v15>; + vddio-supply = <&camera_vddio_v1v8>; + vana-supply = <&camera_vana_v2v8>; + + reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + st,leds = <2>; + + orientation = <2>; + rotation = <0>; + + port { + endpoint { + data-lanes = <1>; + link-frequencies = /bits/ 64 <600000000>; + remote-endpoint = <&csiphy0_ep>; + }; + }; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/st,vd56g3.yaml b/sys/contrib/device-tree/Bindings/media/i2c/st,vd56g3.yaml new file mode 100644 index 000000000000..c6673b8539db --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/st,vd56g3.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) 2024 STMicroelectronics SA. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/st,vd56g3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics VD56G3 Global Shutter Image Sensor + +maintainers: + - Benjamin Mugnier <benjamin.mugnier@foss.st.com> + - Sylvain Petinot <sylvain.petinot@foss.st.com> + +description: |- + The STMicroelectronics VD56G3 is a 1.5 M pixel global shutter image sensor + with an active array size of 1124 x 1364 (portrait orientation). It is + programmable through I2C, the address is fixed to 0x10. The sensor output is + available via CSI-2, which is configured as either 1 or 2 data lanes. The + sensor provides 8 GPIOS that can be used for external LED signal + (synchronized with sensor integration periods) + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +properties: + compatible: + enum: + - st,vd56g3 + - st,vd66gy + description: + Two variants are availables; VD56G3 is a monochrome sensor while VD66GY + is a colour variant. + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + vcore-supply: + description: Digital core power supply (1.15V) + + vddio-supply: + description: Digital IO power supply (1.8V) + + vana-supply: + description: Analog power supply (2.8V) + + reset-gpios: + description: Sensor reset active low GPIO (XSHUTDOWN) + maxItems: 1 + + st,leds: + description: + List sensor's GPIOs used to control strobe light sources during exposure + time. The numbers identify the sensor pin on which the illumination system + is connected. GPIOs are active-high. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + items: + minimum: 0 + maximum: 7 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 2 + items: + enum: [1, 2] + + link-frequencies: + maxItems: 1 + items: + enum: [402000000, 750000000] + + lane-polarities: + minItems: 1 + maxItems: 3 + description: Any lane can be inverted or not. + + required: + - data-lanes + - link-frequencies + +required: + - compatible + - reg + - clocks + - vcore-supply + - vddio-supply + - vana-supply + - reset-gpios + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera-sensor@10 { + compatible = "st,vd56g3"; + reg = <0x10>; + + clocks = <&camera_clk_12M>; + + vcore-supply = <&camera_vcore_v1v15>; + vddio-supply = <&camera_vddio_v1v8>; + vana-supply = <&camera_vana_v2v8>; + + reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + st,leds = <6>; + + orientation = <2>; + rotation = <0>; + + port { + endpoint { + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <402000000>; + remote-endpoint = <&csiphy0_ep>; + }; + }; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/thine,thp7312.yaml b/sys/contrib/device-tree/Bindings/media/i2c/thine,thp7312.yaml index 535acf2b88a9..bc339a7374b2 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/thine,thp7312.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/thine,thp7312.yaml @@ -135,8 +135,7 @@ properties: data-lanes: $ref: /schemas/media/video-interfaces.yaml#/properties/data-lanes - items: - maxItems: 4 + maxItems: 4 description: This property is for lane reordering between the THP7312 and the imaging sensor that it is connected to. diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ti,ds90ub953.yaml b/sys/contrib/device-tree/Bindings/media/i2c/ti,ds90ub953.yaml index 2030366994d1..2e129bf573b7 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/ti,ds90ub953.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/ti,ds90ub953.yaml @@ -38,6 +38,13 @@ properties: '#clock-cells': const: 0 + reg: + maxItems: 1 + description: + The strap I2C address of the serializer. Can be used by the deserializer + to communicate over back-channel when the forward-channel is not yet + active. + ports: $ref: /schemas/graph.yaml#/properties/ports @@ -81,51 +88,57 @@ examples: - | #include <dt-bindings/gpio/gpio.h> - serializer { - compatible = "ti,ds90ub953-q1"; + link { + #address-cells = <1>; + #size-cells = <0>; + + serializer@18 { + compatible = "ti,ds90ub953-q1"; + reg = <0x18>; - gpio-controller; - #gpio-cells = <2>; + gpio-controller; + #gpio-cells = <2>; - #clock-cells = <0>; + #clock-cells = <0>; - ports { - #address-cells = <1>; - #size-cells = <0>; + ports { + #address-cells = <1>; + #size-cells = <0>; - port@0 { - reg = <0>; - ub953_in: endpoint { - clock-lanes = <0>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&sensor_out>; + port@0 { + reg = <0>; + ub953_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&sensor_out>; + }; }; - }; - port@1 { - reg = <1>; - endpoint { - remote-endpoint = <&deser_fpd_in>; + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&deser_fpd_in>; + }; }; }; - }; - i2c { - #address-cells = <1>; - #size-cells = <0>; + i2c { + #address-cells = <1>; + #size-cells = <0>; - sensor@1a { - compatible = "sony,imx274"; - reg = <0x1a>; + sensor@1a { + compatible = "sony,imx274"; + reg = <0x1a>; - reset-gpios = <&serializer 0 GPIO_ACTIVE_LOW>; + reset-gpios = <&serializer 0 GPIO_ACTIVE_LOW>; - clocks = <&serializer>; - clock-names = "inck"; + clocks = <&serializer>; + clock-names = "inck"; - port { - sensor_out: endpoint { - remote-endpoint = <&ub953_in>; + port { + sensor_out: endpoint { + remote-endpoint = <&ub953_in>; + }; }; }; }; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ti,ds90ub960.yaml b/sys/contrib/device-tree/Bindings/media/i2c/ti,ds90ub960.yaml index 0b71e6f911a8..4dcbd2b039a5 100644 --- a/sys/contrib/device-tree/Bindings/media/i2c/ti,ds90ub960.yaml +++ b/sys/contrib/device-tree/Bindings/media/i2c/ti,ds90ub960.yaml @@ -68,6 +68,12 @@ properties: description: The link number maxItems: 1 + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + i2c-alias: $ref: /schemas/types.yaml#/definitions/uint32 description: @@ -107,7 +113,8 @@ properties: maximum: 14 description: Manual EQ level - serializer: + patternProperties: + '^serializer(@[0-9a-f]+)*$': type: object description: FPD-Link Serializer node @@ -115,7 +122,6 @@ properties: - reg - i2c-alias - ti,rx-mode - - serializer ports: $ref: /schemas/graph.yaml#/properties/ports @@ -309,13 +315,17 @@ examples: /* Link 0 has DS90UB953 serializer and IMX274 sensor */ link@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; i2c-alias = <0x44>; ti,rx-mode = <3>; - serializer1: serializer { + serializer1: serializer@30 { compatible = "ti,ds90ub953-q1"; + reg = <0x30>; gpio-controller; #gpio-cells = <2>; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ti,ths8200.txt b/sys/contrib/device-tree/Bindings/media/i2c/ti,ths8200.txt new file mode 100644 index 000000000000..285f6ae7dfa9 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/ti,ths8200.txt @@ -0,0 +1,19 @@ +* Texas Instruments THS8200 video encoder + +The ths8200 device is a digital to analog converter used in DVD players, video +recorders, set-top boxes. + +Required Properties : +- compatible : value must be "ti,ths8200" + +Example: + + i2c0@1c22000 { + ... + ... + ths8200@5c { + compatible = "ti,ths8200"; + reg = <0x5c>; + }; + ... + }; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ti,tvp514x.txt b/sys/contrib/device-tree/Bindings/media/i2c/ti,tvp514x.txt new file mode 100644 index 000000000000..46752cc71f2e --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/ti,tvp514x.txt @@ -0,0 +1,44 @@ +* Texas Instruments TVP514x video decoder + +The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, single-chip +digital video decoder that digitizes and decodes all popular baseband analog +video formats into digital video component. The tvp514x decoder supports analog- +to-digital (A/D) conversion of component RGB and YPbPr signals as well as A/D +conversion and decoding of NTSC, PAL and SECAM composite and S-video into +component YCbCr. + +Required Properties : +- compatible : value should be either one among the following + (a) "ti,tvp5146" for tvp5146 decoder. + (b) "ti,tvp5146m2" for tvp5146m2 decoder. + (c) "ti,tvp5147" for tvp5147 decoder. + (d) "ti,tvp5147m1" for tvp5147m1 decoder. + +- hsync-active: HSYNC Polarity configuration for endpoint. + +- vsync-active: VSYNC Polarity configuration for endpoint. + +- pclk-sample: Clock polarity of the endpoint. + +For further reading on port node refer to Documentation/devicetree/bindings/ +media/video-interfaces.txt. + +Example: + + i2c0@1c22000 { + ... + ... + tvp514x@5c { + compatible = "ti,tvp5146"; + reg = <0x5c>; + + port { + tvp514x_1: endpoint { + hsync-active = <1>; + vsync-active = <1>; + pclk-sample = <0>; + }; + }; + }; + ... + }; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ti,tvp5150.txt b/sys/contrib/device-tree/Bindings/media/i2c/ti,tvp5150.txt new file mode 100644 index 000000000000..94b908ace53c --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/ti,tvp5150.txt @@ -0,0 +1,157 @@ +* Texas Instruments TVP5150 and TVP5151 video decoders + +The TVP5150 and TVP5151 are video decoders that convert baseband NTSC and PAL +(and also SECAM in the TVP5151 case) video signals to either 8-bit 4:2:2 YUV +with discrete syncs or 8-bit ITU-R BT.656 with embedded syncs output formats. + +Required Properties: +==================== +- compatible: Value must be "ti,tvp5150". +- reg: I2C slave address. + +Optional Properties: +==================== +- pdn-gpios: Phandle for the GPIO connected to the PDN pin, if any. +- reset-gpios: Phandle for the GPIO connected to the RESETB pin, if any. + +The device node must contain one 'port' child node per device physical input +and output port, in accordance with the video interface bindings defined in +Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes +are numbered as follows + + Name Type Port + -------------------------------------- + AIP1A sink 0 + AIP1B sink 1 + Y-OUT src 2 + +The device node must contain at least one sink port and the src port. Each input +port must be linked to an endpoint defined in [1]. The port/connector layout is +as follows + +tvp-5150 port@0 (AIP1A) + endpoint@0 -----------> Comp0-Con port + endpoint@1 ------+----> Svideo-Con port +tvp-5150 port@1 (AIP1B) | + endpoint@1 ------+ + endpoint@0 -----------> Comp1-Con port +tvp-5150 port@2 + endpoint (video bitstream output at YOUT[0-7] parallel bus) + +Required Endpoint Properties for parallel synchronization on output port: +========================================================================= + +- hsync-active: Active state of the HSYNC signal. Must be <1> (HIGH). +- vsync-active: Active state of the VSYNC signal. Must be <1> (HIGH). +- field-even-active: Field signal level during the even field data + transmission. Must be <0>. + +Note: Do not specify any of these properties if you want to use the embedded + BT.656 synchronization. + +Optional Connector Properties: +============================== + +- sdtv-standards: Set the possible signals to which the hardware tries to lock + instead of using the autodetection mechanism. Please look at + [1] for more information. + +[1] Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml. + +Example - three input sources: +#include <dt-bindings/display/sdtv-standards.h> + +comp_connector_0 { + compatible = "composite-video-connector"; + label = "Composite0"; + sdtv-standards = <SDTV_STD_PAL_M>; /* limit to pal-m signals */ + + port { + composite0_to_tvp5150: endpoint { + remote-endpoint = <&tvp5150_to_composite0>; + }; + }; +}; + +comp_connector_1 { + compatible = "composite-video-connector"; + label = "Composite1"; + sdtv-standards = <SDTV_STD_NTSC_M>; /* limit to ntsc-m signals */ + + port { + composite1_to_tvp5150: endpoint { + remote-endpoint = <&tvp5150_to_composite1>; + }; + }; +}; + +svideo_connector { + compatible = "svideo-connector"; + label = "S-Video"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + svideo_luma_to_tvp5150: endpoint@0 { + reg = <0>; + remote-endpoint = <&tvp5150_to_svideo_luma>; + }; + + svideo_chroma_to_tvp5150: endpoint@1 { + reg = <1>; + remote-endpoint = <&tvp5150_to_svideo_chroma>; + }; + }; +}; + +&i2c2 { + tvp5150@5c { + compatible = "ti,tvp5150"; + reg = <0x5c>; + pdn-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tvp5150_to_composite0: endpoint@0 { + reg = <0>; + remote-endpoint = <&composite0_to_tvp5150>; + }; + + tvp5150_to_svideo_luma: endpoint@1 { + reg = <1>; + remote-endpoint = <&svideo_luma_to_tvp5150>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tvp5150_to_composite1: endpoint@0 { + reg = <0>; + remote-endpoint = <&composite1_to_tvp5150>; + }; + + tvp5150_to_svideo_chroma: endpoint@1 { + reg = <1>; + remote-endpoint = <&svideo_chroma_to_tvp5150>; + }; + }; + + port@2 { + reg = <2>; + + tvp5150_1: endpoint { + remote-endpoint = <&ccdc_ep>; + }; + }; + }; +}; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/ti,tvp7002.txt b/sys/contrib/device-tree/Bindings/media/i2c/ti,tvp7002.txt new file mode 100644 index 000000000000..5f28b5d9abcc --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/ti,tvp7002.txt @@ -0,0 +1,53 @@ +* Texas Instruments TV7002 video decoder + +The TVP7002 device supports digitizing of video and graphics signal in RGB and +YPbPr color space. + +Required Properties : +- compatible : Must be "ti,tvp7002" + +Optional Properties: +- hsync-active: HSYNC Polarity configuration for the bus. Default value when + this property is not specified is <0>. + +- vsync-active: VSYNC Polarity configuration for the bus. Default value when + this property is not specified is <0>. + +- pclk-sample: Clock polarity of the bus. Default value when this property is + not specified is <0>. + +- sync-on-green-active: Active state of Sync-on-green signal property of the + endpoint. + 0 = Normal Operation (Active Low, Default) + 1 = Inverted operation + +- field-even-active: Active-high Field ID output polarity control of the bus. + Under normal operation, the field ID output is set to logic 1 for an odd field + (field 1) and set to logic 0 for an even field (field 0). + 0 = Normal Operation (Active Low, Default) + 1 = FID output polarity inverted + +For further reading of port node refer Documentation/devicetree/bindings/media/ +video-interfaces.txt. + +Example: + + i2c0@1c22000 { + ... + ... + tvp7002@5c { + compatible = "ti,tvp7002"; + reg = <0x5c>; + + port { + tvp7002_1: endpoint { + hsync-active = <1>; + vsync-active = <1>; + pclk-sample = <0>; + sync-on-green-active = <1>; + field-even-active = <0>; + }; + }; + }; + ... + }; diff --git a/sys/contrib/device-tree/Bindings/media/i2c/toshiba,tc358743.txt b/sys/contrib/device-tree/Bindings/media/i2c/toshiba,tc358743.txt new file mode 100644 index 000000000000..59102edcf01e --- /dev/null +++ b/sys/contrib/device-tree/Bindings/media/i2c/toshiba,tc358743.txt @@ -0,0 +1,48 @@ +* Toshiba TC358743 HDMI-RX to MIPI CSI2-TX Bridge + +The Toshiba TC358743 HDMI-RX to MIPI CSI2-TX (H2C) is a bridge that converts +a HDMI stream to MIPI CSI-2 TX. It is programmable through I2C. + +Required Properties: + +- compatible: value should be "toshiba,tc358743" +- clocks, clock-names: should contain a phandle link to the reference clock + source, the clock input is named "refclk". + +Optional Properties: + +- reset-gpios: gpio phandle GPIO connected to the reset pin +- interrupts: GPIO connected to the interrupt pin +- data-lanes: should be <1 2 3 4> for four-lane operation, + or <1 2> for two-lane operation +- clock-lanes: should be <0> +- clock-noncontinuous: Presence of this boolean property decides whether the + MIPI CSI-2 clock is continuous or non-continuous. +- link-frequencies: List of allowed link frequencies in Hz. Each frequency is + expressed as a 64-bit big-endian integer. The frequency + is half of the bps per lane due to DDR transmission. + +For further information on the MIPI CSI-2 endpoint node properties, see +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + + tc358743@f { + compatible = "toshiba,tc358743"; + reg = <0x0f>; + clocks = <&hdmi_osc>; + clock-names = "refclk"; + reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio2>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + + port { + tc358743_out: endpoint { + remote-endpoint = <&mipi_csi2_in>; + data-lanes = <1 2 3 4>; + clock-lanes = <0>; + clock-noncontinuous; + link-frequencies = /bits/ 64 <297000000>; + }; + }; + }; |