diff options
Diffstat (limited to 'sys/contrib/device-tree/Bindings/remoteproc/qcom,q6v5.txt')
-rw-r--r-- | sys/contrib/device-tree/Bindings/remoteproc/qcom,q6v5.txt | 179 |
1 files changed, 6 insertions, 173 deletions
diff --git a/sys/contrib/device-tree/Bindings/remoteproc/qcom,q6v5.txt b/sys/contrib/device-tree/Bindings/remoteproc/qcom,q6v5.txt index 69c49c7b2cff..573a88b60677 100644 --- a/sys/contrib/device-tree/Bindings/remoteproc/qcom,q6v5.txt +++ b/sys/contrib/device-tree/Bindings/remoteproc/qcom,q6v5.txt @@ -7,15 +7,8 @@ on the Qualcomm Hexagon core. Usage: required Value type: <string> Definition: must be one of: - "qcom,q6v5-pil", "qcom,ipq8074-wcss-pil" "qcom,qcs404-wcss-pil" - "qcom,msm8916-mss-pil", - "qcom,msm8974-mss-pil" - "qcom,msm8996-mss-pil" - "qcom,msm8998-mss-pil" - "qcom,sc7180-mss-pil" - "qcom,sdm845-mss-pil" - reg: Usage: required @@ -36,27 +29,7 @@ on the Qualcomm Hexagon core. - interrupt-names: Usage: required Value type: <stringlist> - Definition: The interrupts needed depends on the the compatible - string: - qcom,q6v5-pil: - qcom,ipq8074-wcss-pil: - qcom,qcs404-wcss-pil: - qcom,msm8916-mss-pil: - qcom,msm8974-mss-pil: - must be "wdog", "fatal", "ready", "handover", "stop-ack" - qcom,msm8996-mss-pil: - qcom,msm8998-mss-pil: - qcom,sc7180-mss-pil: - qcom,sdm845-mss-pil: - must be "wdog", "fatal", "ready", "handover", "stop-ack", - "shutdown-ack" - -- firmware-name: - Usage: optional - Value type: <stringlist> - Definition: must list the relative firmware image paths for mba and - modem. They are used for booting and authenticating the - Hexagon core. + Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack" - clocks: Usage: required @@ -74,70 +47,23 @@ on the Qualcomm Hexagon core. "gcc_axim_cbcr", "lcc_ahbfabric_cbc", "tcsr_lcc_cbc", "lcc_abhs_cbc", "lcc_tcm_slave_cbc", "lcc_abhm_cbc", "lcc_axim_cbc", "lcc_bcr_sleep" - qcom,q6v5-pil: - qcom,msm8916-mss-pil: - qcom,msm8974-mss-pil: - must be "iface", "bus", "mem", "xo" - qcom,msm8996-mss-pil: - must be "iface", "bus", "mem", "xo", "gpll0_mss", - "snoc_axi", "mnoc_axi", "pnoc", "qdss" - qcom,msm8998-mss-pil: - must be "iface", "bus", "mem", "xo", "gpll0_mss", - "snoc_axi", "mnoc_axi", "qdss" - qcom,sc7180-mss-pil: - must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi", - "nav" - qcom,sdm845-mss-pil: - must be "iface", "bus", "mem", "xo", "gpll0_mss", - "snoc_axi", "mnoc_axi", "prng" - resets: Usage: required Value type: <phandle> - Definition: reference to the reset-controller for the modem sub-system - reference to the list of 3 reset-controllers for the + Definition: reference to the list of 3 reset-controllers for the wcss sub-system - reference to the list of 2 reset-controllers for the modem - sub-system on SC7180, SDM845 SoCs - reset-names: Usage: required Value type: <stringlist> - Definition: must be "mss_restart" for the modem sub-system - must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset" + Definition: must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset" for the wcss sub-system - must be "mss_restart", "pdc_reset" for the modem - sub-system on SC7180, SDM845 SoCs -For devices where the mba and mpss sub-nodes are not specified, mba/mpss region -should be referenced as follows: - memory-region: Usage: required Value type: <phandle> - Definition: reference to the reserved-memory for the mba region followed - by the mpss region - -For the compatible strings below the following supplies are required: - "qcom,q6v5-pil" - "qcom,msm8916-mss-pil", -- cx-supply: (deprecated, use power domain instead) -- mx-supply: (deprecated, use power domain instead) -- pll-supply: - Usage: required - Value type: <phandle> - Definition: reference to the regulators to be held on behalf of the - booting of the Hexagon core - -For the compatible string below the following supplies are required: - "qcom,msm8974-mss-pil" -- cx-supply: (deprecated, use power domain instead) -- mss-supply: -- mx-supply: (deprecated, use power domain instead) -- pll-supply: - Usage: required - Value type: <phandle> - Definition: reference to the regulators to be held on behalf of the - booting of the Hexagon core + Definition: reference to wcss reserved-memory region. For the compatible string below the following supplies are required: "qcom,qcs404-wcss-pil" @@ -147,35 +73,6 @@ For the compatible string below the following supplies are required: Definition: reference to the regulators to be held on behalf of the booting of the Hexagon core -For the compatible string below the following supplies are required: - "qcom,msm8996-mss-pil" -- pll-supply: - Usage: required - Value type: <phandle> - Definition: reference to the regulators to be held on behalf of the - booting of the Hexagon core - -- power-domains: - Usage: required - Value type: <phandle> - Definition: reference to power-domains that match power-domain-names - -- power-domain-names: - Usage: required - Value type: <stringlist> - Definition: The power-domains needed depend on the compatible string: - qcom,ipq8074-wcss-pil: - no power-domain names required - qcom,q6v5-pil: - qcom,msm8916-mss-pil: - qcom,msm8974-mss-pil: - qcom,msm8996-mss-pil: - qcom,msm8998-mss-pil: - must be "cx", "mx" - qcom,sc7180-mss-pil: - qcom,sdm845-mss-pil: - must be "cx", "mx", "mss", "load_state" - - qcom,smem-states: Usage: required Value type: <phandle> @@ -191,25 +88,9 @@ For the compatible string below the following supplies are required: Usage: required Value type: <prop-encoded-array> Definition: a phandle reference to a syscon representing TCSR followed - by the three offsets within syscon for q6, modem and nc + by the three offsets within syscon for q6, wcss and nc halt registers. -For the compatible strings below the following phandle references are required: - "qcom,sc7180-mss-pil" -- qcom,spare-regs: - Usage: required - Value type: <prop-encoded-array> - Definition: a phandle reference to a syscon representing TCSR followed - by the offset within syscon for conn_box_spare0 register - used by the modem sub-system running on SC7180 SoC. - -The Hexagon node must contain iommus property as described in ../iommu/iommu.txt -on platforms which do not have TrustZone. - -= SUBNODES: -The Hexagon node must contain two subnodes, named "mba" and "mpss" representing -the memory regions used by the Hexagon firmware. Each sub-node must contain: - - memory-region: Usage: required Value type: <phandle> @@ -217,53 +98,5 @@ the memory regions used by the Hexagon firmware. Each sub-node must contain: The Hexagon node may also have an subnode named either "smd-edge" or "glink-edge" that describes the communication edge, channels and devices -related to the Hexagon. See ../soc/qcom/qcom,smd.txt and +related to the Hexagon. See ../soc/qcom/qcom,smd.yaml and ../soc/qcom/qcom,glink.txt for details on how to describe these. - -= EXAMPLE -The following example describes the resources needed to boot control the -Hexagon, as it is found on MSM8974 boards. - - modem-rproc@fc880000 { - compatible = "qcom,q6v5-pil"; - reg = <0xfc880000 0x100>, - <0xfc820000 0x020>; - reg-names = "qdsp6", "rmb"; - - interrupts-extended = <&intc 0 24 1>, - <&modem_smp2p_in 0 0>, - <&modem_smp2p_in 1 0>, - <&modem_smp2p_in 2 0>, - <&modem_smp2p_in 3 0>; - interrupt-names = "wdog", - "fatal", - "ready", - "handover", - "stop-ack"; - - clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, - <&gcc GCC_MSS_CFG_AHB_CLK>, - <&gcc GCC_BOOT_ROM_AHB_CLK>; - clock-names = "iface", "bus", "mem"; - - qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>; - - resets = <&gcc GCC_MSS_RESTART>; - reset-names = "mss_restart"; - - cx-supply = <&pm8841_s2>; - mss-supply = <&pm8841_s3>; - mx-supply = <&pm8841_s1>; - pll-supply = <&pm8941_l12>; - - qcom,smem-states = <&modem_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - mba { - memory-region = <&mba_region>; - }; - - mpss { - memory-region = <&mpss_region>; - }; - }; |