diff options
Diffstat (limited to 'sys/contrib/device-tree/src/arm64/ti/k3-am68-sk-base-board.dts')
| -rw-r--r-- | sys/contrib/device-tree/src/arm64/ti/k3-am68-sk-base-board.dts | 33 |
1 files changed, 32 insertions, 1 deletions
diff --git a/sys/contrib/device-tree/src/arm64/ti/k3-am68-sk-base-board.dts b/sys/contrib/device-tree/src/arm64/ti/k3-am68-sk-base-board.dts index d5ceab79536c..e84c504c87d2 100644 --- a/sys/contrib/device-tree/src/arm64/ti/k3-am68-sk-base-board.dts +++ b/sys/contrib/device-tree/src/arm64/ti/k3-am68-sk-base-board.dts @@ -44,6 +44,17 @@ regulator-boot-on; }; + vsys_5v0: regulator-vsys5v0 { + /* Output of LM61460 */ + compatible = "regulator-fixed"; + regulator-name = "vsys_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vusb_main>; + regulator-always-on; + regulator-boot-on; + }; + vsys_3v3: regulator-vsys3v3 { /* Output of LM5141 */ compatible = "regulator-fixed"; @@ -76,7 +87,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; - vin-supply = <&vsys_3v3>; + vin-supply = <&vsys_5v0>; gpios = <&main_gpio0 49 GPIO_ACTIVE_HIGH>; states = <1800000 0x0>, <3300000 0x1>; @@ -184,6 +195,7 @@ J721S2_IOPAD(0x0d0, PIN_INPUT, 11) /* (AF26) SPI0_CS1.UART8_RXD */ J721S2_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AH27) SPI0_CLK.UART8_TXD */ >; + bootph-all; }; main_i2c0_pins_default: main-i2c0-default-pins { @@ -211,6 +223,7 @@ J721S2_IOPAD(0x0f0, PIN_INPUT, 0) /* (R22) MMC1_DAT3 */ J721S2_IOPAD(0x0e8, PIN_INPUT, 8) /* (AE25) TIMER_IO0.MMC1_SDCD */ >; + bootph-all; }; vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { @@ -313,6 +326,7 @@ J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */ J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */ >; + bootph-all; }; mcu_cpsw_pins_default: mcu-cpsw-default-pins { @@ -330,6 +344,7 @@ J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */ J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */ >; + bootph-all; }; mcu_mdio_pins_default: mcu-mdio-default-pins { @@ -337,6 +352,7 @@ J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */ J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */ >; + bootph-all; }; mcu_mcan0_pins_default: mcu-mcan0-default-pins { @@ -372,6 +388,7 @@ J721S2_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C24) WKUP_GPIO0_13.MCU_UART0_RXD */ J721S2_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (C25) WKUP_GPIO0_12.MCU_UART0_TXD */ >; + bootph-all; }; mcu_rpi_header_gpio0_pins0_default: mcu-rpi-header-gpio0-default-pins-0 { @@ -397,6 +414,14 @@ }; }; +&cpsw_mac_syscon { + bootph-all; +}; + +&phy_gmii_sel { + bootph-all; +}; + &main_gpio0 { status = "okay"; pinctrl-names = "default"; @@ -413,6 +438,7 @@ status = "reserved"; pinctrl-names = "default"; pinctrl-0 = <&wkup_uart0_pins_default>; + bootph-all; }; &wkup_i2c0 { @@ -495,6 +521,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mcu_uart0_pins_default>; + bootph-all; }; &main_uart8 { @@ -503,6 +530,7 @@ pinctrl-0 = <&main_uart8_pins_default>; /* Shared with TFA on this platform */ power-domains = <&k3_pds 357 TI_SCI_PD_SHARED>; + bootph-all; }; &main_i2c0 { @@ -597,6 +625,7 @@ disable-wp; vmmc-supply = <&vdd_mmc1>; vqmmc-supply = <&vdd_sd_dv>; + bootph-all; }; &mcu_cpsw { @@ -607,6 +636,7 @@ &davinci_mdio { phy0: ethernet-phy@0 { reg = <0>; + bootph-all; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; ti,min-output-impedance; @@ -616,6 +646,7 @@ &cpsw_port1 { phy-mode = "rgmii-rxid"; phy-handle = <&phy0>; + bootph-all; }; &mcu_mcan0 { |