aboutsummaryrefslogtreecommitdiff
path: root/sys/dev/ixl/virtchnl.h
diff options
context:
space:
mode:
Diffstat (limited to 'sys/dev/ixl/virtchnl.h')
-rw-r--r--sys/dev/ixl/virtchnl.h747
1 files changed, 747 insertions, 0 deletions
diff --git a/sys/dev/ixl/virtchnl.h b/sys/dev/ixl/virtchnl.h
new file mode 100644
index 000000000000..917f9d7d319e
--- /dev/null
+++ b/sys/dev/ixl/virtchnl.h
@@ -0,0 +1,747 @@
+/******************************************************************************
+
+ Copyright (c) 2013-2017, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+******************************************************************************/
+/*$FreeBSD$*/
+
+#ifndef _VIRTCHNL_H_
+#define _VIRTCHNL_H_
+
+/* Description:
+ * This header file describes the VF-PF communication protocol used
+ * by the drivers for all devices starting from our 40G product line
+ *
+ * Admin queue buffer usage:
+ * desc->opcode is always aqc_opc_send_msg_to_pf
+ * flags, retval, datalen, and data addr are all used normally.
+ * The Firmware copies the cookie fields when sending messages between the
+ * PF and VF, but uses all other fields internally. Due to this limitation,
+ * we must send all messages as "indirect", i.e. using an external buffer.
+ *
+ * All the VSI indexes are relative to the VF. Each VF can have maximum of
+ * three VSIs. All the queue indexes are relative to the VSI. Each VF can
+ * have a maximum of sixteen queues for all of its VSIs.
+ *
+ * The PF is required to return a status code in v_retval for all messages
+ * except RESET_VF, which does not require any response. The return value
+ * is of status_code type, defined in the shared type.h.
+ *
+ * In general, VF driver initialization should roughly follow the order of
+ * these opcodes. The VF driver must first validate the API version of the
+ * PF driver, then request a reset, then get resources, then configure
+ * queues and interrupts. After these operations are complete, the VF
+ * driver may start its queues, optionally add MAC and VLAN filters, and
+ * process traffic.
+ */
+
+/* START GENERIC DEFINES
+ * Need to ensure the following enums and defines hold the same meaning and
+ * value in current and future projects
+ */
+
+/* Error Codes */
+enum virtchnl_status_code {
+ VIRTCHNL_STATUS_SUCCESS = 0,
+ VIRTCHNL_ERR_PARAM = -5,
+ VIRTCHNL_STATUS_ERR_OPCODE_MISMATCH = -38,
+ VIRTCHNL_STATUS_ERR_CQP_COMPL_ERROR = -39,
+ VIRTCHNL_STATUS_ERR_INVALID_VF_ID = -40,
+ VIRTCHNL_STATUS_NOT_SUPPORTED = -64,
+};
+
+#define VIRTCHNL_LINK_SPEED_100MB_SHIFT 0x1
+#define VIRTCHNL_LINK_SPEED_1000MB_SHIFT 0x2
+#define VIRTCHNL_LINK_SPEED_10GB_SHIFT 0x3
+#define VIRTCHNL_LINK_SPEED_40GB_SHIFT 0x4
+#define VIRTCHNL_LINK_SPEED_20GB_SHIFT 0x5
+#define VIRTCHNL_LINK_SPEED_25GB_SHIFT 0x6
+
+enum virtchnl_link_speed {
+ VIRTCHNL_LINK_SPEED_UNKNOWN = 0,
+ VIRTCHNL_LINK_SPEED_100MB = BIT(VIRTCHNL_LINK_SPEED_100MB_SHIFT),
+ VIRTCHNL_LINK_SPEED_1GB = BIT(VIRTCHNL_LINK_SPEED_1000MB_SHIFT),
+ VIRTCHNL_LINK_SPEED_10GB = BIT(VIRTCHNL_LINK_SPEED_10GB_SHIFT),
+ VIRTCHNL_LINK_SPEED_40GB = BIT(VIRTCHNL_LINK_SPEED_40GB_SHIFT),
+ VIRTCHNL_LINK_SPEED_20GB = BIT(VIRTCHNL_LINK_SPEED_20GB_SHIFT),
+ VIRTCHNL_LINK_SPEED_25GB = BIT(VIRTCHNL_LINK_SPEED_25GB_SHIFT),
+};
+
+/* for hsplit_0 field of Rx HMC context */
+/* deprecated with AVF 1.0 */
+enum virtchnl_rx_hsplit {
+ VIRTCHNL_RX_HSPLIT_NO_SPLIT = 0,
+ VIRTCHNL_RX_HSPLIT_SPLIT_L2 = 1,
+ VIRTCHNL_RX_HSPLIT_SPLIT_IP = 2,
+ VIRTCHNL_RX_HSPLIT_SPLIT_TCP_UDP = 4,
+ VIRTCHNL_RX_HSPLIT_SPLIT_SCTP = 8,
+};
+
+#define VIRTCHNL_ETH_LENGTH_OF_ADDRESS 6
+/* END GENERIC DEFINES */
+
+/* Opcodes for VF-PF communication. These are placed in the v_opcode field
+ * of the virtchnl_msg structure.
+ */
+enum virtchnl_ops {
+/* The PF sends status change events to VFs using
+ * the VIRTCHNL_OP_EVENT opcode.
+ * VFs send requests to the PF using the other ops.
+ * Use of "advanced opcode" features must be negotiated as part of capabilities
+ * exchange and are not considered part of base mode feature set.
+ */
+ VIRTCHNL_OP_UNKNOWN = 0,
+ VIRTCHNL_OP_VERSION = 1, /* must ALWAYS be 1 */
+ VIRTCHNL_OP_RESET_VF = 2,
+ VIRTCHNL_OP_GET_VF_RESOURCES = 3,
+ VIRTCHNL_OP_CONFIG_TX_QUEUE = 4,
+ VIRTCHNL_OP_CONFIG_RX_QUEUE = 5,
+ VIRTCHNL_OP_CONFIG_VSI_QUEUES = 6,
+ VIRTCHNL_OP_CONFIG_IRQ_MAP = 7,
+ VIRTCHNL_OP_ENABLE_QUEUES = 8,
+ VIRTCHNL_OP_DISABLE_QUEUES = 9,
+ VIRTCHNL_OP_ADD_ETH_ADDR = 10,
+ VIRTCHNL_OP_DEL_ETH_ADDR = 11,
+ VIRTCHNL_OP_ADD_VLAN = 12,
+ VIRTCHNL_OP_DEL_VLAN = 13,
+ VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE = 14,
+ VIRTCHNL_OP_GET_STATS = 15,
+ VIRTCHNL_OP_RSVD = 16,
+ VIRTCHNL_OP_EVENT = 17, /* must ALWAYS be 17 */
+ VIRTCHNL_OP_IWARP = 20, /* advanced opcode */
+ VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP = 21, /* advanced opcode */
+ VIRTCHNL_OP_RELEASE_IWARP_IRQ_MAP = 22, /* advanced opcode */
+ VIRTCHNL_OP_CONFIG_RSS_KEY = 23,
+ VIRTCHNL_OP_CONFIG_RSS_LUT = 24,
+ VIRTCHNL_OP_GET_RSS_HENA_CAPS = 25,
+ VIRTCHNL_OP_SET_RSS_HENA = 26,
+ VIRTCHNL_OP_ENABLE_VLAN_STRIPPING = 27,
+ VIRTCHNL_OP_DISABLE_VLAN_STRIPPING = 28,
+ VIRTCHNL_OP_REQUEST_QUEUES = 29,
+
+};
+
+/* This macro is used to generate a compilation error if a structure
+ * is not exactly the correct length. It gives a divide by zero error if the
+ * structure is not of the correct size, otherwise it creates an enum that is
+ * never used.
+ */
+#define VIRTCHNL_CHECK_STRUCT_LEN(n, X) enum virtchnl_static_assert_enum_##X \
+ {virtchnl_static_assert_##X = (n) / ((sizeof(struct X) == (n)) ? 1 : 0)}
+
+/* Virtual channel message descriptor. This overlays the admin queue
+ * descriptor. All other data is passed in external buffers.
+ */
+
+struct virtchnl_msg {
+ u8 pad[8]; /* AQ flags/opcode/len/retval fields */
+ enum virtchnl_ops v_opcode; /* avoid confusion with desc->opcode */
+ enum virtchnl_status_code v_retval; /* ditto for desc->retval */
+ u32 vfid; /* used by PF when sending to VF */
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(20, virtchnl_msg);
+
+/* Message descriptions and data structures.*/
+
+/* VIRTCHNL_OP_VERSION
+ * VF posts its version number to the PF. PF responds with its version number
+ * in the same format, along with a return code.
+ * Reply from PF has its major/minor versions also in param0 and param1.
+ * If there is a major version mismatch, then the VF cannot operate.
+ * If there is a minor version mismatch, then the VF can operate but should
+ * add a warning to the system log.
+ *
+ * This enum element MUST always be specified as == 1, regardless of other
+ * changes in the API. The PF must always respond to this message without
+ * error regardless of version mismatch.
+ */
+#define VIRTCHNL_VERSION_MAJOR 1
+#define VIRTCHNL_VERSION_MINOR 1
+#define VIRTCHNL_VERSION_MINOR_NO_VF_CAPS 0
+
+struct virtchnl_version_info {
+ u32 major;
+ u32 minor;
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_version_info);
+
+#define VF_IS_V10(_v) (((_v)->major == 1) && ((_v)->minor == 0))
+#define VF_IS_V11(_ver) (((_ver)->major == 1) && ((_ver)->minor == 1))
+
+/* VIRTCHNL_OP_RESET_VF
+ * VF sends this request to PF with no parameters
+ * PF does NOT respond! VF driver must delay then poll VFGEN_RSTAT register
+ * until reset completion is indicated. The admin queue must be reinitialized
+ * after this operation.
+ *
+ * When reset is complete, PF must ensure that all queues in all VSIs associated
+ * with the VF are stopped, all queue configurations in the HMC are set to 0,
+ * and all MAC and VLAN filters (except the default MAC address) on all VSIs
+ * are cleared.
+ */
+
+/* VSI types that use VIRTCHNL interface for VF-PF communication. VSI_SRIOV
+ * vsi_type should always be 6 for backward compatibility. Add other fields
+ * as needed.
+ */
+enum virtchnl_vsi_type {
+ VIRTCHNL_VSI_TYPE_INVALID = 0,
+ VIRTCHNL_VSI_SRIOV = 6,
+};
+
+/* VIRTCHNL_OP_GET_VF_RESOURCES
+ * Version 1.0 VF sends this request to PF with no parameters
+ * Version 1.1 VF sends this request to PF with u32 bitmap of its capabilities
+ * PF responds with an indirect message containing
+ * virtchnl_vf_resource and one or more
+ * virtchnl_vsi_resource structures.
+ */
+
+struct virtchnl_vsi_resource {
+ u16 vsi_id;
+ u16 num_queue_pairs;
+ enum virtchnl_vsi_type vsi_type;
+ u16 qset_handle;
+ u8 default_mac_addr[VIRTCHNL_ETH_LENGTH_OF_ADDRESS];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vsi_resource);
+
+/* VF capability flags
+ * VIRTCHNL_VF_OFFLOAD_L2 flag is inclusive of base mode L2 offloads including
+ * TX/RX Checksum offloading and TSO for non-tunnelled packets.
+ */
+#define VIRTCHNL_VF_OFFLOAD_L2 0x00000001
+#define VIRTCHNL_VF_OFFLOAD_IWARP 0x00000002
+#define VIRTCHNL_VF_OFFLOAD_RSVD 0x00000004
+#define VIRTCHNL_VF_OFFLOAD_RSS_AQ 0x00000008
+#define VIRTCHNL_VF_OFFLOAD_RSS_REG 0x00000010
+#define VIRTCHNL_VF_OFFLOAD_WB_ON_ITR 0x00000020
+#define VIRTCHNL_VF_OFFLOAD_REQ_QUEUES 0x00000040
+#define VIRTCHNL_VF_OFFLOAD_VLAN 0x00010000
+#define VIRTCHNL_VF_OFFLOAD_RX_POLLING 0x00020000
+#define VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2 0x00040000
+#define VIRTCHNL_VF_OFFLOAD_RSS_PF 0X00080000
+#define VIRTCHNL_VF_OFFLOAD_ENCAP 0X00100000
+#define VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM 0X00200000
+#define VIRTCHNL_VF_OFFLOAD_RX_ENCAP_CSUM 0X00400000
+
+#define VF_BASE_MODE_OFFLOADS (VIRTCHNL_VF_OFFLOAD_L2 | \
+ VIRTCHNL_VF_OFFLOAD_VLAN | \
+ VIRTCHNL_VF_OFFLOAD_RSS_PF)
+
+struct virtchnl_vf_resource {
+ u16 num_vsis;
+ u16 num_queue_pairs;
+ u16 max_vectors;
+ u16 max_mtu;
+
+ u32 vf_cap_flags;
+ u32 rss_key_size;
+ u32 rss_lut_size;
+
+ struct virtchnl_vsi_resource vsi_res[1];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(36, virtchnl_vf_resource);
+
+/* VIRTCHNL_OP_CONFIG_TX_QUEUE
+ * VF sends this message to set up parameters for one TX queue.
+ * External data buffer contains one instance of virtchnl_txq_info.
+ * PF configures requested queue and returns a status code.
+ */
+
+/* Tx queue config info */
+struct virtchnl_txq_info {
+ u16 vsi_id;
+ u16 queue_id;
+ u16 ring_len; /* number of descriptors, multiple of 8 */
+ u16 headwb_enabled; /* deprecated with AVF 1.0 */
+ u64 dma_ring_addr;
+ u64 dma_headwb_addr; /* deprecated with AVF 1.0 */
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_txq_info);
+
+/* VIRTCHNL_OP_CONFIG_RX_QUEUE
+ * VF sends this message to set up parameters for one RX queue.
+ * External data buffer contains one instance of virtchnl_rxq_info.
+ * PF configures requested queue and returns a status code.
+ */
+
+/* Rx queue config info */
+struct virtchnl_rxq_info {
+ u16 vsi_id;
+ u16 queue_id;
+ u32 ring_len; /* number of descriptors, multiple of 32 */
+ u16 hdr_size;
+ u16 splithdr_enabled; /* deprecated with AVF 1.0 */
+ u32 databuffer_size;
+ u32 max_pkt_size;
+ u32 pad1;
+ u64 dma_ring_addr;
+ enum virtchnl_rx_hsplit rx_split_pos; /* deprecated with AVF 1.0 */
+ u32 pad2;
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_rxq_info);
+
+/* VIRTCHNL_OP_CONFIG_VSI_QUEUES
+ * VF sends this message to set parameters for all active TX and RX queues
+ * associated with the specified VSI.
+ * PF configures queues and returns status.
+ * If the number of queues specified is greater than the number of queues
+ * associated with the VSI, an error is returned and no queues are configured.
+ */
+struct virtchnl_queue_pair_info {
+ /* NOTE: vsi_id and queue_id should be identical for both queues. */
+ struct virtchnl_txq_info txq;
+ struct virtchnl_rxq_info rxq;
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(64, virtchnl_queue_pair_info);
+
+struct virtchnl_vsi_queue_config_info {
+ u16 vsi_id;
+ u16 num_queue_pairs;
+ u32 pad;
+ struct virtchnl_queue_pair_info qpair[1];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(72, virtchnl_vsi_queue_config_info);
+
+/* VIRTCHNL_OP_REQUEST_QUEUES
+ * VF sends this message to request the PF to allocate additional queues to
+ * this VF. Each VF gets a guaranteed number of queues on init but asking for
+ * additional queues must be negotiated. This is a best effort request as it
+ * is possible the PF does not have enough queues left to support the request.
+ * If the PF cannot support the number requested it will respond with the
+ * maximum number it is able to support; otherwise it will respond with the
+ * number requested.
+ */
+
+/* VF resource request */
+struct virtchnl_vf_res_request {
+ u16 num_queue_pairs;
+};
+
+/* VIRTCHNL_OP_CONFIG_IRQ_MAP
+ * VF uses this message to map vectors to queues.
+ * The rxq_map and txq_map fields are bitmaps used to indicate which queues
+ * are to be associated with the specified vector.
+ * The "other" causes are always mapped to vector 0.
+ * PF configures interrupt mapping and returns status.
+ */
+struct virtchnl_vector_map {
+ u16 vsi_id;
+ u16 vector_id;
+ u16 rxq_map;
+ u16 txq_map;
+ u16 rxitr_idx;
+ u16 txitr_idx;
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_vector_map);
+
+struct virtchnl_irq_map_info {
+ u16 num_vectors;
+ struct virtchnl_vector_map vecmap[1];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(14, virtchnl_irq_map_info);
+
+/* VIRTCHNL_OP_ENABLE_QUEUES
+ * VIRTCHNL_OP_DISABLE_QUEUES
+ * VF sends these message to enable or disable TX/RX queue pairs.
+ * The queues fields are bitmaps indicating which queues to act upon.
+ * (Currently, we only support 16 queues per VF, but we make the field
+ * u32 to allow for expansion.)
+ * PF performs requested action and returns status.
+ */
+struct virtchnl_queue_select {
+ u16 vsi_id;
+ u16 pad;
+ u32 rx_queues;
+ u32 tx_queues;
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_queue_select);
+
+/* VIRTCHNL_OP_ADD_ETH_ADDR
+ * VF sends this message in order to add one or more unicast or multicast
+ * address filters for the specified VSI.
+ * PF adds the filters and returns status.
+ */
+
+/* VIRTCHNL_OP_DEL_ETH_ADDR
+ * VF sends this message in order to remove one or more unicast or multicast
+ * filters for the specified VSI.
+ * PF removes the filters and returns status.
+ */
+
+struct virtchnl_ether_addr {
+ u8 addr[VIRTCHNL_ETH_LENGTH_OF_ADDRESS];
+ u8 pad[2];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_ether_addr);
+
+struct virtchnl_ether_addr_list {
+ u16 vsi_id;
+ u16 num_elements;
+ struct virtchnl_ether_addr list[1];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_ether_addr_list);
+
+/* VIRTCHNL_OP_ADD_VLAN
+ * VF sends this message to add one or more VLAN tag filters for receives.
+ * PF adds the filters and returns status.
+ * If a port VLAN is configured by the PF, this operation will return an
+ * error to the VF.
+ */
+
+/* VIRTCHNL_OP_DEL_VLAN
+ * VF sends this message to remove one or more VLAN tag filters for receives.
+ * PF removes the filters and returns status.
+ * If a port VLAN is configured by the PF, this operation will return an
+ * error to the VF.
+ */
+
+struct virtchnl_vlan_filter_list {
+ u16 vsi_id;
+ u16 num_elements;
+ u16 vlan_id[1];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_vlan_filter_list);
+
+/* VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE
+ * VF sends VSI id and flags.
+ * PF returns status code in retval.
+ * Note: we assume that broadcast accept mode is always enabled.
+ */
+struct virtchnl_promisc_info {
+ u16 vsi_id;
+ u16 flags;
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(4, virtchnl_promisc_info);
+
+#define FLAG_VF_UNICAST_PROMISC 0x00000001
+#define FLAG_VF_MULTICAST_PROMISC 0x00000002
+
+/* VIRTCHNL_OP_GET_STATS
+ * VF sends this message to request stats for the selected VSI. VF uses
+ * the virtchnl_queue_select struct to specify the VSI. The queue_id
+ * field is ignored by the PF.
+ *
+ * PF replies with struct eth_stats in an external buffer.
+ */
+
+/* VIRTCHNL_OP_CONFIG_RSS_KEY
+ * VIRTCHNL_OP_CONFIG_RSS_LUT
+ * VF sends these messages to configure RSS. Only supported if both PF
+ * and VF drivers set the VIRTCHNL_VF_OFFLOAD_RSS_PF bit during
+ * configuration negotiation. If this is the case, then the RSS fields in
+ * the VF resource struct are valid.
+ * Both the key and LUT are initialized to 0 by the PF, meaning that
+ * RSS is effectively disabled until set up by the VF.
+ */
+struct virtchnl_rss_key {
+ u16 vsi_id;
+ u16 key_len;
+ u8 key[1]; /* RSS hash key, packed bytes */
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_rss_key);
+
+struct virtchnl_rss_lut {
+ u16 vsi_id;
+ u16 lut_entries;
+ u8 lut[1]; /* RSS lookup table */
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_rss_lut);
+
+/* VIRTCHNL_OP_GET_RSS_HENA_CAPS
+ * VIRTCHNL_OP_SET_RSS_HENA
+ * VF sends these messages to get and set the hash filter enable bits for RSS.
+ * By default, the PF sets these to all possible traffic types that the
+ * hardware supports. The VF can query this value if it wants to change the
+ * traffic types that are hashed by the hardware.
+ */
+struct virtchnl_rss_hena {
+ u64 hena;
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_rss_hena);
+
+/* VIRTCHNL_OP_EVENT
+ * PF sends this message to inform the VF driver of events that may affect it.
+ * No direct response is expected from the VF, though it may generate other
+ * messages in response to this one.
+ */
+enum virtchnl_event_codes {
+ VIRTCHNL_EVENT_UNKNOWN = 0,
+ VIRTCHNL_EVENT_LINK_CHANGE,
+ VIRTCHNL_EVENT_RESET_IMPENDING,
+ VIRTCHNL_EVENT_PF_DRIVER_CLOSE,
+};
+
+#define PF_EVENT_SEVERITY_INFO 0
+#define PF_EVENT_SEVERITY_ATTENTION 1
+#define PF_EVENT_SEVERITY_ACTION_REQUIRED 2
+#define PF_EVENT_SEVERITY_CERTAIN_DOOM 255
+
+struct virtchnl_pf_event {
+ enum virtchnl_event_codes event;
+ union {
+ struct {
+ enum virtchnl_link_speed link_speed;
+ bool link_status;
+ } link_event;
+ } event_data;
+
+ int severity;
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_pf_event);
+
+
+/* VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP
+ * VF uses this message to request PF to map IWARP vectors to IWARP queues.
+ * The request for this originates from the VF IWARP driver through
+ * a client interface between VF LAN and VF IWARP driver.
+ * A vector could have an AEQ and CEQ attached to it although
+ * there is a single AEQ per VF IWARP instance in which case
+ * most vectors will have an INVALID_IDX for aeq and valid idx for ceq.
+ * There will never be a case where there will be multiple CEQs attached
+ * to a single vector.
+ * PF configures interrupt mapping and returns status.
+ */
+
+/* HW does not define a type value for AEQ; only for RX/TX and CEQ.
+ * In order for us to keep the interface simple, SW will define a
+ * unique type value for AEQ.
+ */
+#define QUEUE_TYPE_PE_AEQ 0x80
+#define QUEUE_INVALID_IDX 0xFFFF
+
+struct virtchnl_iwarp_qv_info {
+ u32 v_idx; /* msix_vector */
+ u16 ceq_idx;
+ u16 aeq_idx;
+ u8 itr_idx;
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_iwarp_qv_info);
+
+struct virtchnl_iwarp_qvlist_info {
+ u32 num_vectors;
+ struct virtchnl_iwarp_qv_info qv_info[1];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_iwarp_qvlist_info);
+
+
+/* VF reset states - these are written into the RSTAT register:
+ * VFGEN_RSTAT on the VF
+ * When the PF initiates a reset, it writes 0
+ * When the reset is complete, it writes 1
+ * When the PF detects that the VF has recovered, it writes 2
+ * VF checks this register periodically to determine if a reset has occurred,
+ * then polls it to know when the reset is complete.
+ * If either the PF or VF reads the register while the hardware
+ * is in a reset state, it will return DEADBEEF, which, when masked
+ * will result in 3.
+ */
+enum virtchnl_vfr_states {
+ VIRTCHNL_VFR_INPROGRESS = 0,
+ VIRTCHNL_VFR_COMPLETED,
+ VIRTCHNL_VFR_VFACTIVE,
+};
+
+/**
+ * virtchnl_vc_validate_vf_msg
+ * @ver: Virtchnl version info
+ * @v_opcode: Opcode for the message
+ * @msg: pointer to the msg buffer
+ * @msglen: msg length
+ *
+ * validate msg format against struct for each opcode
+ */
+static inline int
+virtchnl_vc_validate_vf_msg(struct virtchnl_version_info *ver, u32 v_opcode,
+ u8 *msg, u16 msglen)
+{
+ bool err_msg_format = FALSE;
+ int valid_len = 0;
+
+ /* Validate message length. */
+ switch (v_opcode) {
+ case VIRTCHNL_OP_VERSION:
+ valid_len = sizeof(struct virtchnl_version_info);
+ break;
+ case VIRTCHNL_OP_RESET_VF:
+ break;
+ case VIRTCHNL_OP_GET_VF_RESOURCES:
+ if (VF_IS_V11(ver))
+ valid_len = sizeof(u32);
+ break;
+ case VIRTCHNL_OP_CONFIG_TX_QUEUE:
+ valid_len = sizeof(struct virtchnl_txq_info);
+ break;
+ case VIRTCHNL_OP_CONFIG_RX_QUEUE:
+ valid_len = sizeof(struct virtchnl_rxq_info);
+ break;
+ case VIRTCHNL_OP_CONFIG_VSI_QUEUES:
+ valid_len = sizeof(struct virtchnl_vsi_queue_config_info);
+ if (msglen >= valid_len) {
+ struct virtchnl_vsi_queue_config_info *vqc =
+ (struct virtchnl_vsi_queue_config_info *)msg;
+ valid_len += (vqc->num_queue_pairs *
+ sizeof(struct
+ virtchnl_queue_pair_info));
+ if (vqc->num_queue_pairs == 0)
+ err_msg_format = TRUE;
+ }
+ break;
+ case VIRTCHNL_OP_CONFIG_IRQ_MAP:
+ valid_len = sizeof(struct virtchnl_irq_map_info);
+ if (msglen >= valid_len) {
+ struct virtchnl_irq_map_info *vimi =
+ (struct virtchnl_irq_map_info *)msg;
+ valid_len += (vimi->num_vectors *
+ sizeof(struct virtchnl_vector_map));
+ if (vimi->num_vectors == 0)
+ err_msg_format = TRUE;
+ }
+ break;
+ case VIRTCHNL_OP_ENABLE_QUEUES:
+ case VIRTCHNL_OP_DISABLE_QUEUES:
+ valid_len = sizeof(struct virtchnl_queue_select);
+ break;
+ case VIRTCHNL_OP_ADD_ETH_ADDR:
+ case VIRTCHNL_OP_DEL_ETH_ADDR:
+ valid_len = sizeof(struct virtchnl_ether_addr_list);
+ if (msglen >= valid_len) {
+ struct virtchnl_ether_addr_list *veal =
+ (struct virtchnl_ether_addr_list *)msg;
+ valid_len += veal->num_elements *
+ sizeof(struct virtchnl_ether_addr);
+ if (veal->num_elements == 0)
+ err_msg_format = TRUE;
+ }
+ break;
+ case VIRTCHNL_OP_ADD_VLAN:
+ case VIRTCHNL_OP_DEL_VLAN:
+ valid_len = sizeof(struct virtchnl_vlan_filter_list);
+ if (msglen >= valid_len) {
+ struct virtchnl_vlan_filter_list *vfl =
+ (struct virtchnl_vlan_filter_list *)msg;
+ valid_len += vfl->num_elements * sizeof(u16);
+ if (vfl->num_elements == 0)
+ err_msg_format = TRUE;
+ }
+ break;
+ case VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE:
+ valid_len = sizeof(struct virtchnl_promisc_info);
+ break;
+ case VIRTCHNL_OP_GET_STATS:
+ valid_len = sizeof(struct virtchnl_queue_select);
+ break;
+ case VIRTCHNL_OP_IWARP:
+ /* These messages are opaque to us and will be validated in
+ * the RDMA client code. We just need to check for nonzero
+ * length. The firmware will enforce max length restrictions.
+ */
+ if (msglen)
+ valid_len = msglen;
+ else
+ err_msg_format = TRUE;
+ break;
+ case VIRTCHNL_OP_RELEASE_IWARP_IRQ_MAP:
+ break;
+ case VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP:
+ valid_len = sizeof(struct virtchnl_iwarp_qvlist_info);
+ if (msglen >= valid_len) {
+ struct virtchnl_iwarp_qvlist_info *qv =
+ (struct virtchnl_iwarp_qvlist_info *)msg;
+ if (qv->num_vectors == 0) {
+ err_msg_format = TRUE;
+ break;
+ }
+ valid_len += ((qv->num_vectors - 1) *
+ sizeof(struct virtchnl_iwarp_qv_info));
+ }
+ break;
+ case VIRTCHNL_OP_CONFIG_RSS_KEY:
+ valid_len = sizeof(struct virtchnl_rss_key);
+ if (msglen >= valid_len) {
+ struct virtchnl_rss_key *vrk =
+ (struct virtchnl_rss_key *)msg;
+ valid_len += vrk->key_len - 1;
+ }
+ break;
+ case VIRTCHNL_OP_CONFIG_RSS_LUT:
+ valid_len = sizeof(struct virtchnl_rss_lut);
+ if (msglen >= valid_len) {
+ struct virtchnl_rss_lut *vrl =
+ (struct virtchnl_rss_lut *)msg;
+ valid_len += vrl->lut_entries - 1;
+ }
+ break;
+ case VIRTCHNL_OP_GET_RSS_HENA_CAPS:
+ break;
+ case VIRTCHNL_OP_SET_RSS_HENA:
+ valid_len = sizeof(struct virtchnl_rss_hena);
+ break;
+ case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING:
+ case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING:
+ break;
+ case VIRTCHNL_OP_REQUEST_QUEUES:
+ valid_len = sizeof(struct virtchnl_vf_res_request);
+ break;
+ /* These are always errors coming from the VF. */
+ case VIRTCHNL_OP_EVENT:
+ case VIRTCHNL_OP_UNKNOWN:
+ default:
+ return VIRTCHNL_ERR_PARAM;
+ }
+ /* few more checks */
+ if (err_msg_format || valid_len != msglen)
+ return VIRTCHNL_STATUS_ERR_OPCODE_MISMATCH;
+
+ return 0;
+}
+#endif /* _VIRTCHNL_H_ */