aboutsummaryrefslogtreecommitdiff
path: root/sys/dev/nand/nfc_fsl.h
diff options
context:
space:
mode:
Diffstat (limited to 'sys/dev/nand/nfc_fsl.h')
-rw-r--r--sys/dev/nand/nfc_fsl.h99
1 files changed, 0 insertions, 99 deletions
diff --git a/sys/dev/nand/nfc_fsl.h b/sys/dev/nand/nfc_fsl.h
deleted file mode 100644
index 5410da558171..000000000000
--- a/sys/dev/nand/nfc_fsl.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*-
- * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
- *
- * Copyright (C) 2012 Juniper Networks, Inc.
- * Copyright (C) 2009-2012 Semihalf
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD$
- */
-
-#ifndef _NAND_NFC_FSL_H_
-#define _NAND_NFC_FSL_H_
-
-/* LBC BR/OR Registers layout definitions */
-#define BR_V 0x00000001
-#define BR_V_SHIFT 0
-#define BR_MSEL 0x000000E0
-#define BR_MSEL_SHIFT 5
-#define BR_DECC_CHECK_MODE 0x00000600
-#define BR_DECC_CHECK_GEN 0x00000400
-
-#define OR_FCM_PAGESIZE 0x00000400
-
-/* Options definitions */
-#define NAND_OPT_ECC_MODE_HW 1
-#define NAND_OPT_ECC_MODE_SOFT (1 << 1)
-
-/* FMR - Flash Mode Register */
-#define FMR_CWTO 0xF000
-#define FMR_CWTO_SHIFT 12
-#define FMR_BOOT 0x0800
-#define FMR_ECCM 0x0100
-#define FMR_AL 0x0030
-#define FMR_AL_SHIFT 4
-#define FMR_OP 0x0003
-#define FMR_OP_SHIFT 0
-
-#define FIR_OP_NOP 0x0 /* No operation and end of sequence */
-#define FIR_OP_CA 0x1 /* Issue current column address */
-#define FIR_OP_PA 0x2 /* Issue current block+page address */
-#define FIR_OP_UA 0x3 /* Issue user defined address */
-#define FIR_OP_CM(x) (4 + (x)) /* Issue command from FCR[CMD(x)] */
-#define FIR_OP_WB 0x8 /* Write FBCR bytes from FCM buffer */
-#define FIR_OP_WS 0x9 /* Write 1 or 2 bytes from MDR[AS] */
-#define FIR_OP_RB 0xA /* Read FBCR bytes to FCM buffer */
-#define FIR_OP_RS 0xB /* Read 1 or 2 bytes to MDR[AS] */
-#define FIR_OP_CW0 0xC /* Wait then issue FCR[CMD0] */
-#define FIR_OP_CW1 0xD /* Wait then issue FCR[CMD1] */
-#define FIR_OP_RBW 0xE /* Wait then read FBCR bytes */
-#define FIR_OP_RSW 0xF /* Wait then read 1 or 2 bytes */
-
-/* LTESR - Transfer Error Status Register */
-#define LTESR_BM 0x80000000
-#define LTESR_FCT 0x40000000
-#define LTESR_PAR 0x20000000
-#define LTESR_WP 0x04000000
-#define LTESR_ATMW 0x00800000
-#define LTESR_ATMR 0x00400000
-#define LTESR_CS 0x00080000
-#define LTESR_CC 0x00000001
-
-#define LTESR_NAND_MASK (LTESR_FCT | LTESR_CC | LTESR_CS)
-
-/* FPAR - Flash Page Address Register */
-#define FPAR_SP_PI 0x00007C00
-#define FPAR_SP_PI_SHIFT 10
-#define FPAR_SP_MS 0x00000200
-#define FPAR_SP_CI 0x000001FF
-#define FPAR_SP_CI_SHIFT 0
-#define FPAR_LP_PI 0x0003F000
-#define FPAR_LP_PI_SHIFT 12
-#define FPAR_LP_MS 0x00000800
-#define FPAR_LP_CI 0x000007FF
-#define FPAR_LP_CI_SHIFT 0
-
-#define FSL_FCM_WAIT_TIMEOUT 10
-
-#endif /* _NAND_NFC_FSL_H_ */