aboutsummaryrefslogtreecommitdiff
path: root/sys/dev/usb
diff options
context:
space:
mode:
Diffstat (limited to 'sys/dev/usb')
-rw-r--r--sys/dev/usb/serial/uslcom.c93
-rw-r--r--sys/dev/usb/usb_ioctl.h4
2 files changed, 86 insertions, 11 deletions
diff --git a/sys/dev/usb/serial/uslcom.c b/sys/dev/usb/serial/uslcom.c
index fb2b4209eae1..848f2d5ed3fa 100644
--- a/sys/dev/usb/serial/uslcom.c
+++ b/sys/dev/usb/serial/uslcom.c
@@ -41,6 +41,7 @@ __FBSDID("$FreeBSD$");
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
+#include <dev/usb/usb_ioctl.h>
#include "usbdevs.h"
#define USB_DEBUG_VAR uslcom_debug
@@ -75,6 +76,7 @@ SYSCTL_INT(_hw_usb_uslcom, OID_AUTO, debug, CTLFLAG_RW,
#define USLCOM_CTRL 0x07
#define USLCOM_RCTRL 0x08
#define USLCOM_SET_FLOWCTRL 0x13
+#define USLCOM_VENDOR_SPECIFIC 0xff
/* USLCOM_UART values */
#define USLCOM_UART_DISABLE 0x00
@@ -113,6 +115,10 @@ SYSCTL_INT(_hw_usb_uslcom, OID_AUTO, debug, CTLFLAG_RW,
#define USLCOM_FLOW_RTS_ON 0x00000040 /* RTS static active */
#define USLCOM_FLOW_RTS_HS 0x00000080 /* RTS handshake */
+/* USLCOM_VENDOR_SPECIFIC values */
+#define USLCOM_WRITE_LATCH 0x37E1
+#define USLCOM_READ_LATCH 0x00C2
+
enum {
USLCOM_BULK_DT_WR,
USLCOM_BULK_DT_RD,
@@ -123,6 +129,7 @@ enum {
struct uslcom_softc {
struct ucom_super_softc sc_super_ucom;
struct ucom_softc sc_ucom;
+ struct usb_callout sc_watchdog;
struct usb_xfer *sc_xfer[USLCOM_N_TRANSFER];
struct usb_device *sc_udev;
@@ -145,6 +152,8 @@ static void uslcom_close(struct ucom_softc *);
static void uslcom_set_dtr(struct ucom_softc *, uint8_t);
static void uslcom_set_rts(struct ucom_softc *, uint8_t);
static void uslcom_set_break(struct ucom_softc *, uint8_t);
+static int uslcom_ioctl(struct ucom_softc *, uint32_t, caddr_t, int,
+ struct thread *);
static int uslcom_pre_param(struct ucom_softc *, struct termios *);
static void uslcom_param(struct ucom_softc *, struct termios *);
static void uslcom_get_status(struct ucom_softc *, uint8_t *, uint8_t *);
@@ -177,7 +186,6 @@ static const struct usb_config uslcom_config[USLCOM_N_TRANSFER] = {
.type = UE_CONTROL,
.endpoint = 0x00,
.direction = UE_DIR_ANY,
- .interval = 150, /* poll status every 150 ms */
.bufsize = sizeof(struct usb_device_request) + 8,
.flags = {.pipe_bof = 1,},
.callback = &uslcom_control_callback,
@@ -192,6 +200,7 @@ static struct ucom_callback uslcom_callback = {
.ucom_cfg_set_dtr = &uslcom_set_dtr,
.ucom_cfg_set_rts = &uslcom_set_rts,
.ucom_cfg_set_break = &uslcom_set_break,
+ .ucom_ioctl = &uslcom_ioctl,
.ucom_cfg_param = &uslcom_param,
.ucom_pre_param = &uslcom_pre_param,
.ucom_start_read = &uslcom_start_read,
@@ -308,6 +317,19 @@ MODULE_DEPEND(uslcom, ucom, 1, 1, 1);
MODULE_DEPEND(uslcom, usb, 1, 1, 1);
MODULE_VERSION(uslcom, 1);
+static void
+uslcom_watchdog(void *arg)
+{
+ struct uslcom_softc *sc = arg;
+
+ mtx_assert(&sc->sc_mtx, MA_OWNED);
+
+ usbd_transfer_start(sc->sc_xfer[USLCOM_CTRL_DT_RD]);
+
+ usb_callout_reset(&sc->sc_watchdog,
+ hz / 4, &uslcom_watchdog, sc);
+}
+
static int
uslcom_probe(device_t dev)
{
@@ -338,6 +360,7 @@ uslcom_attach(device_t dev)
device_set_usb_desc(dev);
mtx_init(&sc->sc_mtx, "uslcom", NULL, MTX_DEF);
+ usb_callout_init_mtx(&sc->sc_watchdog, &sc->sc_mtx, 0);
sc->sc_udev = uaa->device;
@@ -378,6 +401,8 @@ uslcom_detach(device_t dev)
ucom_detach(&sc->sc_super_ucom, &sc->sc_ucom);
usbd_transfer_unsetup(sc->sc_xfer, USLCOM_N_TRANSFER);
+
+ usb_callout_drain(&sc->sc_watchdog);
mtx_destroy(&sc->sc_mtx);
return (0);
@@ -399,8 +424,9 @@ uslcom_open(struct ucom_softc *ucom)
&req, NULL, 0, 1000)) {
DPRINTF("UART enable failed (ignored)\n");
}
- /* Start polling status */
- usbd_transfer_start(sc->sc_xfer[USLCOM_CTRL_DT_RD]);
+
+ /* start polling status */
+ uslcom_watchdog(sc);
}
static void
@@ -409,8 +435,8 @@ uslcom_close(struct ucom_softc *ucom)
struct uslcom_softc *sc = ucom->sc_parent;
struct usb_device_request req;
- /* Stop polling status */
- usbd_transfer_stop(sc->sc_xfer[USLCOM_CTRL_DT_RD]);
+ /* stop polling status */
+ usb_callout_stop(&sc->sc_watchdog);
req.bmRequestType = USLCOM_WRITE;
req.bRequest = USLCOM_UART;
@@ -591,6 +617,55 @@ uslcom_set_break(struct ucom_softc *ucom, uint8_t onoff)
}
}
+static int
+uslcom_ioctl(struct ucom_softc *ucom, uint32_t cmd, caddr_t data,
+ int flag, struct thread *td)
+{
+ struct uslcom_softc *sc = ucom->sc_parent;
+ struct usb_device_request req;
+ int error = 0;
+ uint8_t latch;
+
+ DPRINTF("cmd=0x%08x\n", cmd);
+
+ switch (cmd) {
+ case USB_GET_GPIO:
+ req.bmRequestType = USLCOM_READ;
+ req.bRequest = USLCOM_VENDOR_SPECIFIC;
+ USETW(req.wValue, USLCOM_READ_LATCH);
+ USETW(req.wIndex, 0);
+ USETW(req.wLength, sizeof(latch));
+
+ if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
+ &req, &latch, 0, 1000)) {
+ DPRINTF("Get LATCH failed\n");
+ error = EIO;
+ }
+ *(int *)data = latch;
+ break;
+
+ case USB_SET_GPIO:
+ req.bmRequestType = USLCOM_WRITE;
+ req.bRequest = USLCOM_VENDOR_SPECIFIC;
+ USETW(req.wValue, USLCOM_WRITE_LATCH);
+ USETW(req.wIndex, (*(int *)data));
+ USETW(req.wLength, 0);
+
+ if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
+ &req, NULL, 0, 1000)) {
+ DPRINTF("Set LATCH failed\n");
+ error = EIO;
+ }
+ break;
+
+ default:
+ DPRINTF("Unknown IOCTL\n");
+ error = ENOIOCTL;
+ break;
+ }
+ return (error);
+}
+
static void
uslcom_write_callback(struct usb_xfer *xfer, usb_error_t error)
{
@@ -681,11 +756,9 @@ uslcom_control_callback(struct usb_xfer *xfer, usb_error_t error)
sc->sc_msr = msr;
ucom_status_change(&sc->sc_ucom);
}
-
- /* FALLTHROUGH */
+ break;
case USB_ST_SETUP:
-tr_setup:
req.bmRequestType = USLCOM_READ;
req.bRequest = USLCOM_RCTRL;
USETW(req.wValue, 0);
@@ -702,10 +775,8 @@ tr_setup:
break;
default: /* error */
- if (error != USB_ERR_CANCELLED) {
+ if (error != USB_ERR_CANCELLED)
DPRINTF("error=%s\n", usbd_errstr(error));
- goto tr_setup;
- }
break;
}
}
diff --git a/sys/dev/usb/usb_ioctl.h b/sys/dev/usb/usb_ioctl.h
index d35fa1038e5a..9af6ee5c7af7 100644
--- a/sys/dev/usb/usb_ioctl.h
+++ b/sys/dev/usb/usb_ioctl.h
@@ -289,6 +289,10 @@ struct usb_gen_quirk {
#define USB_GET_CM_OVER_DATA _IOR ('U', 180, int)
#define USB_SET_CM_OVER_DATA _IOW ('U', 181, int)
+/* GPIO control */
+#define USB_GET_GPIO _IOR ('U', 182, int)
+#define USB_SET_GPIO _IOW ('U', 183, int)
+
/* USB file system interface */
#define USB_FS_START _IOW ('U', 192, struct usb_fs_start)
#define USB_FS_STOP _IOW ('U', 193, struct usb_fs_stop)
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-24 09:38:50 +0000