diff options
Diffstat (limited to 'sys/i386/isa/sound/trix.c')
-rw-r--r-- | sys/i386/isa/sound/trix.c | 443 |
1 files changed, 244 insertions, 199 deletions
diff --git a/sys/i386/isa/sound/trix.c b/sys/i386/isa/sound/trix.c index 6e3db0fa7c90..818ad5ffb374 100644 --- a/sys/i386/isa/sound/trix.c +++ b/sys/i386/isa/sound/trix.c @@ -1,11 +1,10 @@ /* * sound/trix.c - * - * Low level driver for the MediaTriX AudioTriX Pro - * (MT-0002-PC Control Chip) - * + * + * Low level driver for the MediaTriX AudioTriX Pro (MT-0002-PC Control Chip) + * * Copyright by Hannu Savolainen 1995 - * + * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are * met: 1. Redistributions of source code must retain the above copyright @@ -13,7 +12,7 @@ * Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. - * + * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE @@ -25,299 +24,345 @@ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. - * + * */ -#include "sound_config.h" +#include <i386/isa/sound/sound_config.h> -#if defined(CONFIGURE_SOUNDCARD) && !defined(EXCLUDE_TRIX) +#if NTRIX > 0 #ifdef INCLUDE_TRIX_BOOT -#include "trix_boot.h" +#include <i386/isa/sound/trix_boot.h> +#endif + +#if (NSB > 0) +extern int sb_no_recording; #endif static int kilroy_was_here = 0; /* Don't detect twice */ static int sb_initialized = 0; -static int mpu_initialized = 0; -static unsigned char -trix_read (int addr) +static sound_os_info *trix_osp = NULL; + +static u_char +trix_read(int addr) { - OUTB ((unsigned char) addr, 0x390); /* MT-0002-PC ASIC address */ - return INB (0x391); /* MT-0002-PC ASIC data */ + outb(0x390, (u_char) addr); /* MT-0002-PC ASIC address */ + return inb(0x391); /* MT-0002-PC ASIC data */ } static void -trix_write (int addr, int data) +trix_write(int addr, int data) { - OUTB ((unsigned char) addr, 0x390); /* MT-0002-PC ASIC address */ - OUTB ((unsigned char) data, 0x391); /* MT-0002-PC ASIC data */ + outb(0x390, (u_char) addr); /* MT-0002-PC ASIC address */ + outb(0x391, (u_char) data); /* MT-0002-PC ASIC data */ } static void -download_boot (int base) +download_boot(int base) { - int i = 0, n = sizeof (trix_boot); - - trix_write (0xf8, 0x00); /* ??????? */ - OUTB (0x01, base + 6); /* Clear the internal data pointer */ - OUTB (0x00, base + 6); /* Restart */ - - /* - * Write the boot code to the RAM upload/download register. - * Each write increments the internal data pointer. - */ - OUTB (0x01, base + 6); /* Clear the internal data pointer */ - OUTB (0x1A, 0x390); /* Select RAM download/upload port */ - - for (i = 0; i < n; i++) - OUTB (trix_boot[i], 0x391); - for (i = n; i < 10016; i++) /* Clear up to first 16 bytes of data RAM */ - OUTB (0x00, 0x391); - OUTB (0x00, base + 6); /* Reset */ - OUTB (0x50, 0x390); /* ?????? */ +#ifdef INCLUDE_TRIX_BOOT + int i = 0, n = sizeof(trix_boot); + + trix_write(0xf8, 0x00); /* ??????? */ + outb(base + 6, 0x01); /* Clear the internal data pointer */ + outb(base + 6, 0x00); /* Restart */ + + /* + * Write the boot code to the RAM upload/download register. Each + * write increments the internal data pointer. + */ + outb(base + 6, 0x01); /* Clear the internal data pointer */ + outb(0x390, 0x1A); /* Select RAM download/upload port */ + + for (i = 0; i < n; i++) + outb(0x391, trix_boot[i]); + for (i = n; i < 10016; i++) /* Clear up to first 16 bytes of data RAM */ + outb(0x391, 0x00); + outb(base + 6, 0x00); /* Reset */ + outb(0x390, 0x50); /* ?????? */ +#endif + } static int -trix_set_wss_port (struct address_info *hw_config) +trix_set_wss_port(struct address_info * hw_config) { - unsigned char addr_bits; + u_char addr_bits; - if (kilroy_was_here) /* Already initialized */ - return 0; + if (0) { + printf("AudioTriX: Config port I/O conflict\n"); + return 0; + } + if (kilroy_was_here) /* Already initialized */ + return 0; - kilroy_was_here = 1; + if (trix_read(0x15) != 0x71) { /* No asic signature */ + DDB(printf("No AudioTriX ASIC signature found\n")); + return 0; + } - if (trix_read (0x15) != 0x71) /* No asic signature */ - return 0; + kilroy_was_here = 1; - /* - * Disable separate wave playback and recording DMA channels since - * the driver doesn't support duplex mode yet. - */ + /* + * Reset some registers. + */ - trix_write (0x13, trix_read (0x13) & ~0x80); - trix_write (0x14, trix_read (0x14) & ~0x80); + trix_write(0x13, 0); + trix_write(0x14, 0); - /* + /* * Configure the ASIC to place the codec to the proper I/O location - */ + */ - switch (hw_config->io_base) - { + switch (hw_config->io_base) { case 0x530: - addr_bits = 0; - break; + addr_bits = 0; + break; case 0x604: - addr_bits = 1; - break; + addr_bits = 1; + break; case 0xE80: - addr_bits = 2; - break; + addr_bits = 2; + break; case 0xF40: - addr_bits = 3; - break; + addr_bits = 3; + break; default: - return 0; + return 0; } - trix_write (0x19, (trix_read (0x19) & 0x03) | addr_bits); - return 1; + trix_write(0x19, (trix_read(0x19) & 0x03) | addr_bits); + return 1; } /* - * Probe and attach routines for the Windows Sound System mode of - * AudioTriX Pro + * Probe and attach routines for the Windows Sound System mode of AudioTriX + * Pro */ int -probe_trix_wss (struct address_info *hw_config) +probe_trix_wss(struct address_info * hw_config) { - /* - * Check if the IO port returns valid signature. The original MS Sound - * system returns 0x04 while some cards (AudioTriX Pro for example) - * return 0x00. - */ - if (!trix_set_wss_port (hw_config)) - return 0; - - if ((INB (hw_config->io_base + 3) & 0x3f) != 0x00) - { - DDB (printk ("No MSS signature detected on port 0x%x\n", hw_config->io_base)); - return 0; + /* + * Check if the IO port returns valid signature. The original MS + * Sound system returns 0x04 while some cards (AudioTriX Pro for + * example) return 0x00. + */ + + if (0) { + printf("AudioTriX: MSS I/O port conflict\n"); + return 0; } + trix_osp = hw_config->osp; - if (hw_config->irq > 11) - { - printk ("AudioTriX: Bad WSS IRQ %d\n", hw_config->irq); - return 0; - } + if (!trix_set_wss_port(hw_config)) + return 0; - if (hw_config->dma != 0 && hw_config->dma != 1 && hw_config->dma != 3) - { - printk ("AudioTriX: Bad WSS DMA %d\n", hw_config->dma); - return 0; + if ((inb(hw_config->io_base + 3) & 0x3f) != 0x00) { + DDB(printf("No MSS signature detected on port 0x%x\n", + hw_config->io_base)); + return 0; } - - /* + if (hw_config->irq > 11) { + printf("AudioTriX: Bad WSS IRQ %d\n", hw_config->irq); + return 0; + } + if (hw_config->dma != 0 && hw_config->dma != 1 && hw_config->dma != 3) { + printf("AudioTriX: Bad WSS DMA %d\n", hw_config->dma); + return 0; + } + if (hw_config->dma2 != -1) + if (hw_config->dma2 != 0 && hw_config->dma2 != 1 && hw_config->dma2 != 3) { + printf("AudioTriX: Bad capture DMA %d\n", hw_config->dma2); + return 0; + } + /* * Check that DMA0 is not in use with a 8 bit board. - */ + */ - if (hw_config->dma == 0 && INB (hw_config->io_base + 3) & 0x80) - { - printk ("AudioTriX: Can't use DMA0 with a 8 bit card\n"); - return 0; + if (hw_config->dma == 0 && inb(hw_config->io_base + 3) & 0x80) { + printf("AudioTriX: Can't use DMA0 with a 8 bit card\n"); + return 0; } - - if (hw_config->irq > 7 && hw_config->irq != 9 && INB (hw_config->io_base + 3) & 0x80) - { - printk ("AudioTriX: Can't use IRQ%d with a 8 bit card\n", hw_config->irq); - return 0; + if (hw_config->irq > 7 && hw_config->irq != 9 && inb(hw_config->io_base + 3) & 0x80) { + printf("AudioTriX: Can't use IRQ%d with a 8 bit card\n", hw_config->irq); + return 0; } - - return ad1848_detect (hw_config->io_base + 4); + return ad1848_detect(hw_config->io_base + 4, NULL, hw_config->osp); } -long -attach_trix_wss (long mem_start, struct address_info *hw_config) +void +attach_trix_wss(struct address_info * hw_config) { - static unsigned char interrupt_bits[12] = - {-1, -1, -1, -1, -1, -1, -1, 0x08, -1, 0x10, 0x18, 0x20}; - char bits; + static u_char interrupt_bits[12] = + {-1, -1, -1, -1, -1, -1, -1, 0x08, -1, 0x10, 0x18, 0x20}; + char bits; - static unsigned char dma_bits[4] = - {1, 2, 0, 3}; + static u_char dma_bits[4] = + {1, 2, 0, 3}; - int config_port = hw_config->io_base + 0, version_port = hw_config->io_base + 3; + int config_port = hw_config->io_base + 0, + version_port = hw_config->io_base + 3; + int dma1 = hw_config->dma, dma2 = hw_config->dma2; - if (!kilroy_was_here) - return mem_start; + trix_osp = hw_config->osp; - /* + if (!kilroy_was_here) { + DDB(printf("AudioTriX: Attach called but not probed yet???\n")); + return ; + } + /* * Set the IRQ and DMA addresses. - */ + */ + + bits = interrupt_bits[hw_config->irq]; + if (bits == -1) { + printf("AudioTriX: Bad IRQ (%d)\n", hw_config->irq); + return ; + } + outb(config_port, bits | 0x40); + if ((inb(version_port) & 0x40) == 0) + printf("[IRQ Conflict?]"); - bits = interrupt_bits[hw_config->irq]; - if (bits == -1) - return mem_start; + if (hw_config->dma2 == -1) { /* Single DMA mode */ + bits |= dma_bits[dma1]; + dma2 = dma1; + } else { + u_char tmp; - OUTB (bits | 0x40, config_port); - if ((INB (version_port) & 0x40) == 0) - printk ("[IRQ Conflict?]"); + tmp = trix_read(0x13) & ~30; + trix_write(0x13, tmp | 0x80 | (dma1 << 4)); - OUTB (bits | dma_bits[hw_config->dma], config_port); /* Write IRQ+DMA setup */ + tmp = trix_read(0x14) & ~30; + trix_write(0x14, tmp | 0x80 | (dma2 << 4)); + } + + outb(config_port, bits);/* Write IRQ+DMA setup */ - ad1848_init ("AudioTriX Pro", hw_config->io_base + 4, - hw_config->irq, - hw_config->dma, - hw_config->dma); - return mem_start; + ad1848_init("AudioTriX Pro", hw_config->io_base + 4, + hw_config->irq, + dma1, + dma2, + 0, + hw_config->osp); + return ; } int -probe_trix_sb (struct address_info *hw_config) +probe_trix_sb(struct address_info * hw_config) { - - int tmp; - unsigned char conf; - static char irq_translate[] = - {-1, -1, -1, 0, 1, 2, -1, 3}; + int tmp; + u_char conf; + static char irq_translate[] = {-1, -1, -1, 0, 1, 2, -1, 3}; #ifndef INCLUDE_TRIX_BOOT - return 0; /* No boot code -> no fun */ + return 0; /* No boot code -> no fun */ #endif - if (!kilroy_was_here) - return 0; /* AudioTriX Pro has not been detected earlier */ + if (!kilroy_was_here) + return 0; /* AudioTriX Pro has not been detected earlier */ - if (sb_initialized) - return 0; + if (sb_initialized) + return 0; - if (hw_config->io_base & 0xffffff8f != 0x200) - return 0; + if ((hw_config->io_base & 0xffffff8f) != 0x200) + return 0; - tmp = hw_config->irq; - if (tmp > 7) - return 0; - if (irq_translate[tmp] == -1) - return 0; + tmp = hw_config->irq; + if (tmp > 7) + return 0; + if (irq_translate[tmp] == -1) + return 0; - tmp = hw_config->dma; - if (tmp != 1 && tmp != 3) - return 0; + tmp = hw_config->dma; + if (tmp != 1 && tmp != 3) + return 0; - conf = 0x84; /* DMA and IRQ enable */ - conf |= hw_config->io_base & 0x70; /* I/O address bits */ - conf |= irq_translate[hw_config->irq]; - if (hw_config->dma == 3) - conf |= 0x08; - trix_write (0x1b, conf); + conf = 0x84; /* DMA and IRQ enable */ + conf |= hw_config->io_base & 0x70; /* I/O address bits */ + conf |= irq_translate[hw_config->irq]; + if (hw_config->dma == 3) + conf |= 0x08; + trix_write(0x1b, conf); - download_boot (hw_config->io_base); - sb_initialized = 1; + download_boot(hw_config->io_base); + sb_initialized = 1; - return 1; + return 1; } -long -attach_trix_sb (long mem_start, struct address_info *hw_config) +void +attach_trix_sb(struct address_info * hw_config) { - printk (" <AudioTriX>"); - return mem_start; +#if (NSB > 0) + sb_dsp_disable_midi(); + sb_no_recording = 1; +#endif + conf_printf("AudioTriX (SB)", hw_config); } -long -attach_trix_mpu (long mem_start, struct address_info *hw_config) +void +attach_trix_mpu(struct address_info * hw_config) { - return attach_mpu401 (mem_start, hw_config); +#if (defined(CONFIG_MPU401) || defined(CONFIG_MPU_EMU)) && defined(CONFIG_MIDI) + attach_mpu401(hw_config); +#endif } int -probe_trix_mpu (struct address_info *hw_config) +probe_trix_mpu(struct address_info * hw_config) { - unsigned char conf; - static char irq_bits[] = - {-1, -1, -1, 1, 2, 3, -1, 4, -1, 5}; - - if (!kilroy_was_here) - return 0; /* AudioTriX Pro has not been detected earlier */ - - if (!sb_initialized) - return 0; - - if (mpu_initialized) - return 0; +#if (defined(CONFIG_MPU401) || defined(CONFIG_MPU_EMU)) && defined(CONFIG_MIDI) + u_char conf; + static char irq_bits[] = {-1, -1, -1, 1, 2, 3, -1, 4, -1, 5}; - if (hw_config->irq > 9) - return 0; - - if (irq_bits[hw_config->irq] == -1) - return 0; - - switch (hw_config->io_base) - { + if (!kilroy_was_here) { + DDB(printf("Trix: WSS and SB modes must be initialized before MPU\n")); + return 0; /* AudioTriX Pro has not been detected earlier */ + } + if (!sb_initialized) { + DDB(printf("Trix: SB mode must be initialized before MPU\n")); + return 0; + } + if (mpu_initialized) { + DDB(printf("Trix: MPU mode already initialized\n")); + return 0; + } + if (hw_config->irq > 9) { + printf("AudioTriX: Bad MPU IRQ %d\n", hw_config->irq); + return 0; + } + if (irq_bits[hw_config->irq] == -1) { + printf("AudioTriX: Bad MPU IRQ %d\n", hw_config->irq); + return 0; + } + switch (hw_config->io_base) { case 0x330: - conf = 0x00; - break; + conf = 0x00; + break; case 0x370: - conf = 0x04; - break; + conf = 0x04; + break; case 0x3b0: - conf = 0x08; - break; + conf = 0x08; + break; case 0x3f0: - conf = 0x0c; - break; + conf = 0x0c; + break; default: - return 0; /* Invalid port */ + return 0; /* Invalid port */ } - conf |= irq_bits[hw_config->irq] << 4; + conf |= irq_bits[hw_config->irq] << 4; - trix_write (0x19, (trix_read (0x19) & 0x83) | conf); + trix_write(0x19, (trix_read(0x19) & 0x83) | conf); - mpu_initialized = 1; + mpu_initialized = 1; - return probe_mpu401 (hw_config); + return probe_mpu401(hw_config); +#else + return 0; +#endif } #endif |