aboutsummaryrefslogtreecommitdiff
path: root/sys/i386
diff options
context:
space:
mode:
Diffstat (limited to 'sys/i386')
-rw-r--r--sys/i386/eisa/dpt_eisa.c500
-rw-r--r--sys/i386/eisa/dpt_eisa.h56
-rw-r--r--sys/i386/include/bus_memio.h31
-rw-r--r--sys/i386/include/bus_pio.h31
4 files changed, 0 insertions, 618 deletions
diff --git a/sys/i386/eisa/dpt_eisa.c b/sys/i386/eisa/dpt_eisa.c
deleted file mode 100644
index e933ad6f1407..000000000000
--- a/sys/i386/eisa/dpt_eisa.c
+++ /dev/null
@@ -1,500 +0,0 @@
-/**
- * Copyright (c) 1997 by Matthew N. Dodd <winter@jurai.net>
- * All Rights Reserved
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification, immediately at the beginning of the file.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/* Credits: Based on and part of the DPT driver for FreeBSD written and
- * maintained by Simon Shapiro <shimon@simon-shapiro.org>
- */
-
-/*
- * $Id$
- */
-
-#include "opt_dpt.h"
-
-#include <sys/param.h>
-#include <sys/systm.h>
-#include <sys/malloc.h>
-#include <sys/buf.h>
-#include <sys/proc.h>
-#include <sys/kernel.h>
-
-#include <scsi/scsi_all.h>
-#include <scsi/scsi_message.h>
-#include <scsi/scsiconf.h>
-
-#include <i386/eisa/eisaconf.h>
-
-#include <sys/dpt.h>
-#include <i386/eisa/dpt_eisa.h>
-
-#include <machine/clock.h>
-
-#include <vm/vm.h>
-#include <vm/vm_param.h>
-#include <vm/pmap.h>
-
-/* Function Prototypes */
-
-int dpt_eisa_probe(void);
-int dpt_eisa_attach(struct eisa_device*);
-int dpt_eisa_shutdown(int);
-
-static const char *dpt_eisa_match(eisa_id_t);
-
-static struct eisa_driver dpt_eisa_driver =
-{
- "dpt",
- dpt_eisa_probe,
- dpt_eisa_attach,
- dpt_eisa_shutdown,
- &dpt_unit
-};
-
-DATA_SET (eisadriver_set, dpt_eisa_driver);
-
-int
-dpt_eisa_probe(void)
-{
- static int already_announced = 0;
- u_int32_t io_base;
- u_int32_t irq;
- struct eisa_device *e_dev = NULL;
- dpt_conf_t *config;
- dpt_softc_t *dpt;
- int count = 0;
-
- if ( !already_announced ) {
- printf("DPT: EISA SCSI HBA Driver, version %d.%d.%d\n",
- DPT_RELEASE, DPT_VERSION, DPT_PATCH);
- ++already_announced;
- }
-
- if ((dpt = (dpt_softc_t *) malloc(sizeof(dpt_softc_t),
- M_DEVBUF, M_NOWAIT)) == NULL) {
- printf("dpt_eisa_probe() : Failed to allocate %d bytes for a DPT softc\n", sizeof(dpt_softc_t));
- return -1;
- }
-
- bzero(dpt, sizeof(dpt_softc_t));
-
- TAILQ_INIT(&dpt->free_ccbs);
- TAILQ_INIT(&dpt->waiting_ccbs);
- TAILQ_INIT(&dpt->submitted_ccbs);
- TAILQ_INIT(&dpt->completed_ccbs);
-
- dpt->queue_status = DPT_QUEUES_NONE_ACTIVE;
- dpt->commands_processed = 0;
- dpt->handle_interrupts = 0;
- dpt->v_membase = NULL;
- dpt->p_membase = NULL;
-
- dpt->unit = -1;
-
- while ((e_dev = eisa_match_dev(e_dev, dpt_eisa_match))) {
- io_base = (e_dev->ioconf.slot * EISA_SLOT_SIZE)
- + DPT_EISA_SLOT_OFFSET;
-
- eisa_add_iospace(e_dev, io_base,
- DPT_EISA_IOSIZE, RESVADDR_NONE);
-
- dpt->io_base = io_base;
-
- if ((config = dpt_get_conf(dpt, 0xc1, 7,
- sizeof(dpt_conf_t), 1)) == NULL) {
-#ifdef DPT_DEBUG_ERROR
- printf("eisa0:%d dpt_eisa_probe() : Failed to get board configuration.\n",
- e_dev->ioconf.slot);
-#endif
- continue;
- }
-
- irq = config->IRQ;
-
- eisa_add_intr(e_dev, irq);
- eisa_registerdev(e_dev, &dpt_eisa_driver);
-
- count++;
-
- }
-
- free(dpt, M_DEVBUF);
- return count;
-}
-
-int
-dpt_eisa_attach(e_dev)
- struct eisa_device *e_dev;
-{
- int result;
- int ndx;
-
- dpt_conf_t *config;
- dpt_softc_t *dpt;
-
- int unit = e_dev->unit;
- int irq;
- resvaddr_t *io_space;
-
- if (TAILQ_FIRST(&e_dev->ioconf.irqs) == NULL) {
-#ifdef DPT_DEBUG_ERROR
- printf("dpt%d: Can't retrieve irq from EISA config struct.\n",
- unit);
-#endif
- return -1;
- }
-
- irq = TAILQ_FIRST(&e_dev->ioconf.irqs)->irq_no;
- io_space = e_dev->ioconf.ioaddrs.lh_first;
-
- if (!io_space) {
-#ifdef DPT_DEBUG_ERROR
- printf("dpt%d: No I/O space?!\n", unit);
-#endif
- return -1;
- }
-
- if ( dpt_controllers_present >= DPT_MAX_ADAPTERS ){
- printf("dpt%d: More than %d Adapters found! Adapter rejected\n",
- unit, DPT_MAX_ADAPTERS);
- return -1;
- }
-
- if ((dpt = (dpt_softc_t *) malloc(sizeof(dpt_softc_t),
- M_DEVBUF, M_NOWAIT)) == NULL) {
- printf("dpt%d: Failed to allocate %d bytes for a DPT softc\n",
- unit, sizeof(dpt_softc_t));
- return -1;
- }
-
- /*
- * Initialize the queues. See dpt.h for details. We do this here,
- * as we may get hit with interrupts at any moment and we want to
- * have a minimal structure in place to handle them. We also want to
- * register interrupts correctly. To do so, we need a valid dpt
- * structure. To have that, we need this minimal setup here.
- */
-
- bzero(dpt, sizeof(dpt_softc_t));
-
- TAILQ_INIT(&dpt->free_ccbs);
- TAILQ_INIT(&dpt->waiting_ccbs);
- TAILQ_INIT(&dpt->submitted_ccbs);
- TAILQ_INIT(&dpt->completed_ccbs);
-
- if (TAILQ_EMPTY(&dpt_softc_list)) {
- TAILQ_INIT(&dpt_softc_list);
- }
-
- TAILQ_INSERT_TAIL(&dpt_softc_list, dpt, links);
- dpt->queue_status = DPT_QUEUES_NONE_ACTIVE;
- dpt->commands_processed = 0;
-
-#ifdef DPT_MEASURE_PERFORMANCE
- /* Zero out all command counters */
- bzero((void *)&dpt->performance, sizeof(dpt_perf_t));
-#endif /* DPT_MEASURE_PERFORMANCE */
-
- dpt->handle_interrupts = 0; /*
- * Do not set to 1 until all
- * initialization is done
- */
- dpt->v_membase = NULL;
- dpt->p_membase = NULL;
-
- dpt->unit = unit;
- dpt->io_base = (e_dev->ioconf.slot * EISA_SLOT_SIZE)
- + DPT_EISA_SLOT_OFFSET;
-
- eisa_reg_start(e_dev);
-
- if (eisa_reg_iospace(e_dev, io_space)) {
-#ifdef DPT_DEBUG_ERROR
- printf("dpt%d: eisa_reg_iospace() failed.\n", unit);
-#endif
- free(dpt, M_DEVBUF);
- return -1;
- }
-
- /* reset the card? */
-
- /* If the DPT is mapped as an IDE controller, let it be IDE controller */
- if (dpt->io_base == ISA_PRIMARY_WD_ADDRESS) {
-#ifdef DPT_DEBUG_WARN
- printf("dpt%d: Mapped as an IDE controller. "
- "Disabling SCSI setup\n", unit);
-#endif
- free(dpt, M_DEVBUF);
- return -1;
- } else {
- if ((config = dpt_get_conf(dpt, 0xc1, 7,
- sizeof(dpt_conf_t), 1)) == NULL) {
-#ifdef DPT_DEBUG_ERROR
- printf("dpt%d: Failed to get board configuration (%x)\n",
- unit, BaseRegister(dpt));
-#endif
- free(dpt, M_DEVBUF);
- return -1;
- }
- }
-
- if(eisa_reg_intr(e_dev, irq, dpt_intr, (void *)dpt, &cam_imask,
- /* shared == */ config->IRQ_TR)) {
-#ifdef DPT_DEBUG_ERROR
- printf("dpt%d: eisa_reg_intr() failed.\n", unit);
-#endif
- free(dpt, M_DEVBUF);
- return -1;
- }
- eisa_reg_end(e_dev);
-
- /* Enable our interrupt handler. */
- if (eisa_enable_intr(e_dev, irq)) {
-#ifdef DPT_DEBUG_ERROR
- printf("dpt%d: eisa_enable_intr() failed.\n", unit);
-#endif
- free(dpt, M_DEVBUF);
- eisa_release_intr(e_dev, irq, dpt_intr);
- return -1;
- }
-
- dpt->max_id = config->MAX_ID;
- dpt->max_lun = config->MAX_LUN;
- dpt->irq = config->IRQ;
- dpt->channels = config->MAX_CHAN;
- dpt->dma_channel = (8 - config->DMA_channel) & 7;
-
-#ifdef DPT_DEBUG_SETUP
- printf("dpt%d: max_id = %d, max_chan = %d, max_lun = %d\n",
- dpt->unit, dpt->max_id, dpt->channels, dpt->max_lun);
-#endif
-
- if (result = dpt_setup(dpt, config)) {
- free(config, M_TEMP);
- free(dpt, M_DEVBUF);
- printf("dpt%d: dpt_setup failed (%d). Driver Disabled :-(\n",
- dpt->unit, result);
- } else {
- /* clean up the informational data, and display */
- char clean_vendor[9];
- char clean_model[17];
- char clean_firmware[5];
- char clean_protocol[5];
- char clean_other[7];
-
- int ndx;
-
- strncpy(clean_other, dpt->board_data.otherData, 8);
- clean_other[6] = '\0';
- for (ndx = 5; ndx >= 0; ndx--) {
- if (clean_other[ndx] == ' ') {
- clean_other[ndx] = '\0';
- } else {
- break;
- }
- }
-
- strncpy(dpt->board_data.otherData, clean_other, 6);
-
- strncpy(clean_vendor, dpt->board_data.vendor, 8);
- clean_vendor[8] = '\0';
-
- for (ndx = 7; ndx >= 0; ndx--) {
- if (clean_vendor[ndx] == ' ') {
- clean_vendor[ndx] = '\0';
- } else {
- break;
- }
- }
-
- strncpy(dpt->board_data.vendor, clean_vendor, 8);
-
- strncpy(clean_model, dpt->board_data.modelNum, 16);
- clean_model[16] = '\0';
-
- for (ndx = 15; ndx >= 0; ndx--) {
- if (clean_model[ndx] == ' ') {
- clean_model[ndx] = '\0';
- } else {
- break;
- }
- }
-
- strncpy(dpt->board_data.modelNum, clean_model, 16);
-
- strncpy(clean_firmware, dpt->board_data.firmware, 4);
- clean_firmware[4] = '\0';
-
- for (ndx = 3; ndx >= 0; ndx--) {
- if (clean_firmware[ndx] == ' ')
- clean_firmware[ndx] = '\0';
- else
- break;
- }
-
- strncpy(dpt->board_data.firmware, clean_firmware, 4);
-
- strncpy(clean_protocol, dpt->board_data.protocol, 4);
- clean_protocol[4] = '\0';
-
- for (ndx = 3; ndx >= 0; ndx--) {
- if (clean_protocol[ndx] == ' ')
- clean_protocol[ndx] = '\0';
- else
- break;
- }
-
- strncpy(dpt->board_data.protocol, clean_protocol, 4);
-
- dpt_detect_cache(dpt);
-
- printf("dpt%d: %s type %x, model %s firmware %s, Protocol %s \n"
- " on port %x with %dMB %s cache. LED = %s\n",
- dpt->unit, clean_vendor, dpt->board_data.deviceType,
- clean_model, clean_firmware, clean_protocol, dpt->io_base,
- dpt->cache_size,
- (dpt->cache_type == DPT_NO_CACHE)
- ? "Disabled"
- : (dpt->cache_type == DPT_CACHE_WRITETHROUGH)
- ? "Write-Through"
- : "Write-Back",
- i2bin(dpt_blinking_led(dpt), 8));
-
- printf("dpt%d: Enabled Options:\n", dpt->unit);
-
-#ifdef DPT_VERIFY_HINTR
- printf(" Verify Lost Transactions\n");
-#endif
-#ifdef DPT_RESTRICTED_FREELIST
- printf(" Restrict the Freelist Size\n");
-#endif
-#ifdef DPT_TRACK_CCB_STATES
- printf(" Precisely Track State Transitions\n");
-#endif
-#ifdef DPT_MEASURE_PERFORMANCE
- printf(" Collect Metrics\n");
-#endif
-#ifdef DPT_FREELIST_IS_STACK
- printf(" Optimize CPU Cache\n");
-#endif
-#ifdef DPT_HANDLE_TIMEOUTS
- printf(" Handle Timeouts\n");
-#endif
-#ifdef DPT_ALLOW_MEMIO
- printf(" Allow I/O to be Memeory Mapped\n");
-#endif
-#ifdef DPT_HINTR_CHECK_SOFTC
- printf(" Validate SoftC at Interrupt\n");
-#endif
-
- /* register shutdown handlers */
- result = at_shutdown((bootlist_fn)dpt_shutdown, (void *)dpt,
- SHUTDOWN_POST_SYNC);
- switch ( result ) {
- case 0:
-#ifdef DPT_DEBUG_SHUTDOWN
- printf("dpt%d: Shutdown handler registered\n", dpt->unit);
-#endif
- break;
- default:
-#ifdef DPT_DEBUG_WARN
- printf("dpt%d: Failed to register shutdown handler (%d)\n",
- dpt->unit, result);
-#endif
- break;
- }
-
- dpt_attach(dpt);
- }
-
- ++dpt_controllers_present;
-
- return 0;
-}
-
-int
-dpt_eisa_shutdown(foo)
- int foo;
-{
-#ifdef DPT_DEBUG_WARN
- printf("dpt_pci_shutdown(%x)\n", foo);
-#endif
- return (0);
-}
-
-static const char *
-dpt_eisa_match(type)
- eisa_id_t type;
-{
- switch (type) {
- case DPT_EISA_DPT2402 :
- return ("DPT PM2012A/9X");
- break;
- case DPT_EISA_DPTA401 :
- return ("DPT PM2012B/9X");
- break;
- case DPT_EISA_DPTA402 :
- return ("DPT PM2012B2/9X");
- break;
- case DPT_EISA_DPTA410 :
- return ("DPT PM2x22A/9X");
- break;
- case DPT_EISA_DPTA411 :
- return ("DPT Spectre");
- break;
- case DPT_EISA_DPTA412 :
- return ("DPT PM2021A/9X");
- break;
- case DPT_EISA_DPTA420 :
- return ("DPT Smart Cache IV (PM2042)");
- break;
- case DPT_EISA_DPTA501 :
- return ("DPT PM2012B1/9X");
- break;
- case DPT_EISA_DPTA502 :
- return ("DPT PM2012Bx/9X");
- break;
- case DPT_EISA_DPTA701 :
- return ("DPT PM2011B1/9X");
- break;
- case DPT_EISA_DPTBC01 :
- return ("DPT PM3011/7X ESDI");
- break;
- case DPT_EISA_NEC8200 :
- return ("NEC EATA SCSI");
- break;
- case DPT_EISA_ATT2408 :
- return ("ATT EATA SCSI");
- break;
- default:
- break;
- }
-
- return (NULL);
-}
-
diff --git a/sys/i386/eisa/dpt_eisa.h b/sys/i386/eisa/dpt_eisa.h
deleted file mode 100644
index 3cd9c015ddb8..000000000000
--- a/sys/i386/eisa/dpt_eisa.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/**
- * Copyright (c) 1997 by Matthew N. Dodd <winter@jurai.net>
- * All Rights Reserved
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification, immediately at the beginning of the file.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/* Credits: Based on and part of the DPT driver for FreeBSD written and
- * maintained by Simon Shapiro <shimon@simon-shapiro.org>
- */
-
-/*
- * $Id: dpt_eisa.h,v 1.1 1998/03/10 21:31:06 ShimonR Exp ShimonR $
- */
-
-#define DPT_EISA_SLOT_OFFSET 0xc88 /* 8 */
-#define DPT_EISA_IOSIZE sizeof(eata_reg_t)
-
-#define ISA_PRIMARY_WD_ADDRESS 0x1f8
-
-#define DPT_EISA_DPT2402 0x12142402
-#define DPT_EISA_DPTA401 0x1214A401
-#define DPT_EISA_DPTA402 0x1214A402
-#define DPT_EISA_DPTA410 0x1214A410
-#define DPT_EISA_DPTA411 0x1214A411
-#define DPT_EISA_DPTA412 0x1214A412
-#define DPT_EISA_DPTA420 0x1214A420
-#define DPT_EISA_DPTA501 0x1214A501
-#define DPT_EISA_DPTA502 0x1214A502
-#define DPT_EISA_DPTA701 0x1214A701
-#define DPT_EISA_DPTBC01 0x1214BC01
-#define DPT_EISA_NEC8200 0x12148200
-#define DPT_EISA_ATT2408 0x12142408
-
diff --git a/sys/i386/include/bus_memio.h b/sys/i386/include/bus_memio.h
deleted file mode 100644
index ee58d5a24ef2..000000000000
--- a/sys/i386/include/bus_memio.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright (c) 1997 Justin Gibbs.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification, immediately at the beginning of the file.
- * 2. The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $Id$
- */
-
-#ifndef _I386_BUS_MEMIO_H_
-#define _I386_BUS_MEMIO_H_
-#endif /* _I386_BUS_MEMIO_H_ */
diff --git a/sys/i386/include/bus_pio.h b/sys/i386/include/bus_pio.h
deleted file mode 100644
index 4eb051e18190..000000000000
--- a/sys/i386/include/bus_pio.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright (c) 1997 Justin Gibbs.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification, immediately at the beginning of the file.
- * 2. The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $Id$
- */
-
-#ifndef _I386_BUS_PIO_H_
-#define _I386_BUS_PIO_H_
-#endif /* _I386_BUS_PIO_H_ */