diff options
Diffstat (limited to 'sys/sys/termios.h')
| -rw-r--r-- | sys/sys/termios.h | 305 |
1 files changed, 4 insertions, 301 deletions
diff --git a/sys/sys/termios.h b/sys/sys/termios.h index 0543d6ee64b6..e5bacf46550f 100644 --- a/sys/sys/termios.h +++ b/sys/sys/termios.h @@ -1,302 +1,5 @@ -/*- - * Copyright (c) 1988, 1989, 1993, 1994 - * The Regents of the University of California. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 4. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)termios.h 8.3 (Berkeley) 3/28/94 - * $FreeBSD$ - */ - -#ifndef _SYS_TERMIOS_H_ -#define _SYS_TERMIOS_H_ - -#include <sys/_types.h> -#ifndef _PID_T_DECLARED -typedef __pid_t pid_t; -#define _PID_T_DECLARED -#endif - -/* - * Special Control Characters - * - * Index into c_cc[] character array. - * - * Name Subscript Enabled by - */ -#define VEOF 0 /* ICANON */ -#define VEOL 1 /* ICANON */ -#ifndef _POSIX_SOURCE -#define VEOL2 2 /* ICANON together with IEXTEN */ -#endif -#define VERASE 3 /* ICANON */ -#ifndef _POSIX_SOURCE -#define VWERASE 4 /* ICANON together with IEXTEN */ -#endif -#define VKILL 5 /* ICANON */ -#ifndef _POSIX_SOURCE -#define VREPRINT 6 /* ICANON together with IEXTEN */ -#define VERASE2 7 /* ICANON */ -#endif -/* 7 ex-spare 1 */ -#define VINTR 8 /* ISIG */ -#define VQUIT 9 /* ISIG */ -#define VSUSP 10 /* ISIG */ -#ifndef _POSIX_SOURCE -#define VDSUSP 11 /* ISIG together with IEXTEN */ -#endif -#define VSTART 12 /* IXON, IXOFF */ -#define VSTOP 13 /* IXON, IXOFF */ -#ifndef _POSIX_SOURCE -#define VLNEXT 14 /* IEXTEN */ -#define VDISCARD 15 /* IEXTEN */ -#endif -#define VMIN 16 /* !ICANON */ -#define VTIME 17 /* !ICANON */ -#ifndef _POSIX_SOURCE -#define VSTATUS 18 /* ICANON together with IEXTEN */ -/* 19 spare 2 */ -#endif -#define NCCS 20 - -#define _POSIX_VDISABLE 0xff - -/* - * Input flags - software input processing - */ -#define IGNBRK 0x00000001 /* ignore BREAK condition */ -#define BRKINT 0x00000002 /* map BREAK to SIGINTR */ -#define IGNPAR 0x00000004 /* ignore (discard) parity errors */ -#define PARMRK 0x00000008 /* mark parity and framing errors */ -#define INPCK 0x00000010 /* enable checking of parity errors */ -#define ISTRIP 0x00000020 /* strip 8th bit off chars */ -#define INLCR 0x00000040 /* map NL into CR */ -#define IGNCR 0x00000080 /* ignore CR */ -#define ICRNL 0x00000100 /* map CR to NL (ala CRMOD) */ -#define IXON 0x00000200 /* enable output flow control */ -#define IXOFF 0x00000400 /* enable input flow control */ -#ifndef _POSIX_SOURCE -#define IXANY 0x00000800 /* any char will restart after stop */ -#define IMAXBEL 0x00002000 /* ring bell on input queue full */ -#endif /*_POSIX_SOURCE */ - -/* - * Output flags - software output processing - */ -#define OPOST 0x00000001 /* enable following output processing */ -#ifndef _POSIX_SOURCE -#define ONLCR 0x00000002 /* map NL to CR-NL (ala CRMOD) */ -#define TABDLY 0x00000004 /* tab delay mask */ -#define TAB0 0x00000000 /* no tab delay and expansion */ -#define TAB3 0x00000004 /* expand tabs to spaces */ -#ifndef _KERNEL -#define OXTABS TAB3 -#endif /* !_KERNEL */ -#define ONOEOT 0x00000008 /* discard EOT's (^D) on output) */ -#define OCRNL 0x00000010 /* map CR to NL on output */ -#define ONOCR 0x00000020 /* no CR output at column 0 */ -#define ONLRET 0x00000040 /* NL performs CR function */ -#endif /*_POSIX_SOURCE */ - -/* - * Control flags - hardware control of terminal - */ -#ifndef _POSIX_SOURCE -#define CIGNORE 0x00000001 /* ignore control flags */ -#endif -#define CSIZE 0x00000300 /* character size mask */ -#define CS5 0x00000000 /* 5 bits (pseudo) */ -#define CS6 0x00000100 /* 6 bits */ -#define CS7 0x00000200 /* 7 bits */ -#define CS8 0x00000300 /* 8 bits */ -#define CSTOPB 0x00000400 /* send 2 stop bits */ -#define CREAD 0x00000800 /* enable receiver */ -#define PARENB 0x00001000 /* parity enable */ -#define PARODD 0x00002000 /* odd parity, else even */ -#define HUPCL 0x00004000 /* hang up on last close */ -#define CLOCAL 0x00008000 /* ignore modem status lines */ -#ifndef _POSIX_SOURCE -#define CCTS_OFLOW 0x00010000 /* CTS flow control of output */ -#define CRTSCTS (CCTS_OFLOW | CRTS_IFLOW) -#define CRTS_IFLOW 0x00020000 /* RTS flow control of input */ -#define CDTR_IFLOW 0x00040000 /* DTR flow control of input */ -#define CDSR_OFLOW 0x00080000 /* DSR flow control of output */ -#define CCAR_OFLOW 0x00100000 /* DCD flow control of output */ -#ifndef _KERNEL -#define MDMBUF CCAR_OFLOW -#endif /* !_KERNEL */ -#endif - - -/* - * "Local" flags - dumping ground for other state - * - * Warning: some flags in this structure begin with - * the letter "I" and look like they belong in the - * input flag. - */ - -#ifndef _POSIX_SOURCE -#define ECHOKE 0x00000001 /* visual erase for line kill */ -#endif /*_POSIX_SOURCE */ -#define ECHOE 0x00000002 /* visually erase chars */ -#define ECHOK 0x00000004 /* echo NL after line kill */ -#define ECHO 0x00000008 /* enable echoing */ -#define ECHONL 0x00000010 /* echo NL even if ECHO is off */ -#ifndef _POSIX_SOURCE -#define ECHOPRT 0x00000020 /* visual erase mode for hardcopy */ -#define ECHOCTL 0x00000040 /* echo control chars as ^(Char) */ -#endif /*_POSIX_SOURCE */ -#define ISIG 0x00000080 /* enable signals INTR, QUIT, [D]SUSP */ -#define ICANON 0x00000100 /* canonicalize input lines */ -#ifndef _POSIX_SOURCE -#define ALTWERASE 0x00000200 /* use alternate WERASE algorithm */ -#endif /*_POSIX_SOURCE */ -#define IEXTEN 0x00000400 /* enable DISCARD and LNEXT */ -#define EXTPROC 0x00000800 /* external processing */ -#define TOSTOP 0x00400000 /* stop background jobs from output */ -#ifndef _POSIX_SOURCE -#define FLUSHO 0x00800000 /* output being flushed (state) */ -#define NOKERNINFO 0x02000000 /* no kernel output from VSTATUS */ -#define PENDIN 0x20000000 /* XXX retype pending input (state) */ -#endif /*_POSIX_SOURCE */ -#define NOFLSH 0x80000000 /* don't flush after interrupt */ - -typedef unsigned int tcflag_t; -typedef unsigned char cc_t; -typedef unsigned int speed_t; - -struct termios { - tcflag_t c_iflag; /* input flags */ - tcflag_t c_oflag; /* output flags */ - tcflag_t c_cflag; /* control flags */ - tcflag_t c_lflag; /* local flags */ - cc_t c_cc[NCCS]; /* control chars */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* - * Standard speeds - */ -#define B0 0 -#define B50 50 -#define B75 75 -#define B110 110 -#define B134 134 -#define B150 150 -#define B200 200 -#define B300 300 -#define B600 600 -#define B1200 1200 -#define B1800 1800 -#define B2400 2400 -#define B4800 4800 -#define B9600 9600 -#define B19200 19200 -#define B38400 38400 -#ifndef _POSIX_SOURCE -#define B7200 7200 -#define B14400 14400 -#define B28800 28800 -#define B57600 57600 -#define B76800 76800 -#define B115200 115200 -#define B230400 230400 -#define B460800 460800 -#define B921600 921600 -#define EXTA 19200 -#define EXTB 38400 -#endif /* !_POSIX_SOURCE */ - -#ifndef _KERNEL - -#ifndef _POSIX_SOURCE -#define CCEQ(val, c) ((c) == (val) && (val) != _POSIX_VDISABLE) -#endif - -/* - * Commands passed to tcsetattr() for setting the termios structure. - */ -#define TCSANOW 0 /* make change immediate */ -#define TCSADRAIN 1 /* drain output, then change */ -#define TCSAFLUSH 2 /* drain output, flush input */ -#ifndef _POSIX_SOURCE -#define TCSASOFT 0x10 /* flag - don't alter h.w. state */ -#endif - -#define TCIFLUSH 1 -#define TCOFLUSH 2 -#define TCIOFLUSH 3 -#define TCOOFF 1 -#define TCOON 2 -#define TCIOFF 3 -#define TCION 4 - -#include <sys/cdefs.h> - -__BEGIN_DECLS -speed_t cfgetispeed(const struct termios *); -speed_t cfgetospeed(const struct termios *); -int cfsetispeed(struct termios *, speed_t); -int cfsetospeed(struct termios *, speed_t); -int tcgetattr(int, struct termios *); -int tcsetattr(int, int, const struct termios *); -int tcdrain(int); -int tcflow(int, int); -int tcflush(int, int); -int tcsendbreak(int, int); - -#if __POSIX_VISIBLE >= 200112 || __BSD_VISIBLE -pid_t tcgetsid(int); -#endif -#if __BSD_VISIBLE -int tcsetsid(int, pid_t); - -void cfmakeraw(struct termios *); -int cfsetspeed(struct termios *, speed_t); -#endif -__END_DECLS - -#endif /* !_KERNEL */ - -#ifndef _POSIX_SOURCE - -/* - * Include tty ioctl's that aren't just for backwards compatibility - * with the old tty driver. These ioctl definitions were previously - * in <sys/ioctl.h>. - */ -#include <sys/ttycom.h> -#endif - -/* - * END OF PROTECTED INCLUDE. - */ -#endif /* !_SYS_TERMIOS_H_ */ - -#ifndef _POSIX_SOURCE -#include <sys/ttydefaults.h> +/* $FreeBSD$ */ +#ifdef __GNUC__ +#warning "this file includes <sys/termios.h> which is deprecated, use <termios.h> instead" #endif +#include <termios.h> |