diff options
Diffstat (limited to 'wpa_supplicant/config_ssid.h')
| -rw-r--r-- | wpa_supplicant/config_ssid.h | 1182 |
1 files changed, 0 insertions, 1182 deletions
diff --git a/wpa_supplicant/config_ssid.h b/wpa_supplicant/config_ssid.h deleted file mode 100644 index 724534dd0123..000000000000 --- a/wpa_supplicant/config_ssid.h +++ /dev/null @@ -1,1182 +0,0 @@ -/* - * WPA Supplicant / Network configuration structures - * Copyright (c) 2003-2013, Jouni Malinen <j@w1.fi> - * - * This software may be distributed under the terms of the BSD license. - * See README for more details. - */ - -#ifndef CONFIG_SSID_H -#define CONFIG_SSID_H - -#include "common/defs.h" -#include "utils/list.h" -#include "eap_peer/eap_config.h" - - -#define DEFAULT_EAP_WORKAROUND ((unsigned int) -1) -#define DEFAULT_EAPOL_FLAGS (EAPOL_FLAG_REQUIRE_KEY_UNICAST | \ - EAPOL_FLAG_REQUIRE_KEY_BROADCAST) -#define DEFAULT_PROTO (WPA_PROTO_WPA | WPA_PROTO_RSN) -#define DEFAULT_KEY_MGMT (WPA_KEY_MGMT_PSK | WPA_KEY_MGMT_IEEE8021X) -#ifdef CONFIG_NO_TKIP -#define DEFAULT_PAIRWISE (WPA_CIPHER_CCMP) -#define DEFAULT_GROUP (WPA_CIPHER_CCMP) -#else /* CONFIG_NO_TKIP */ -#define DEFAULT_PAIRWISE (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP) -#define DEFAULT_GROUP (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP) -#endif /* CONFIG_NO_TKIP */ -#define DEFAULT_FRAGMENT_SIZE 1398 - -#define DEFAULT_BG_SCAN_PERIOD -1 -#define DEFAULT_MESH_MAX_RETRIES 2 -#define DEFAULT_MESH_RETRY_TIMEOUT 40 -#define DEFAULT_MESH_CONFIRM_TIMEOUT 40 -#define DEFAULT_MESH_HOLDING_TIMEOUT 40 -#define DEFAULT_MESH_RSSI_THRESHOLD 1 /* no change */ -#define DEFAULT_DISABLE_HT 0 -#define DEFAULT_DISABLE_HT40 0 -#define DEFAULT_DISABLE_SGI 0 -#define DEFAULT_DISABLE_LDPC 0 -#define DEFAULT_TX_STBC -1 /* no change */ -#define DEFAULT_RX_STBC -1 /* no change */ -#define DEFAULT_DISABLE_MAX_AMSDU -1 /* no change */ -#define DEFAULT_AMPDU_FACTOR -1 /* no change */ -#define DEFAULT_AMPDU_DENSITY -1 /* no change */ -#define DEFAULT_USER_SELECTED_SIM 1 -#define DEFAULT_MAX_OPER_CHWIDTH -1 - -/* Consider global sae_pwe for SAE mechanism for PWE derivation */ -#define DEFAULT_SAE_PWE 4 - -struct psk_list_entry { - struct dl_list list; - u8 addr[ETH_ALEN]; - u8 psk[32]; - u8 p2p; -}; - -enum wpas_mode { - WPAS_MODE_INFRA = 0, - WPAS_MODE_IBSS = 1, - WPAS_MODE_AP = 2, - WPAS_MODE_P2P_GO = 3, - WPAS_MODE_P2P_GROUP_FORMATION = 4, - WPAS_MODE_MESH = 5, -}; - -enum sae_pk_mode { - SAE_PK_MODE_AUTOMATIC = 0, - SAE_PK_MODE_ONLY = 1, - SAE_PK_MODE_DISABLED = 2, -}; - -/** - * struct wpa_ssid - Network configuration data - * - * This structure includes all the configuration variables for a network. This - * data is included in the per-interface configuration data as an element of - * the network list, struct wpa_config::ssid. Each network block in the - * configuration is mapped to a struct wpa_ssid instance. - */ -struct wpa_ssid { - /** - * next - Next network in global list - * - * This pointer can be used to iterate over all networks. The head of - * this list is stored in the ssid field of struct wpa_config. - */ - struct wpa_ssid *next; - - /** - * pnext - Next network in per-priority list - * - * This pointer can be used to iterate over all networks in the same - * priority class. The heads of these list are stored in the pssid - * fields of struct wpa_config. - */ - struct wpa_ssid *pnext; - - /** - * id - Unique id for the network - * - * This identifier is used as a unique identifier for each network - * block when using the control interface. Each network is allocated an - * id when it is being created, either when reading the configuration - * file or when a new network is added through the control interface. - */ - int id; - - /** - * priority - Priority group - * - * By default, all networks will get same priority group (0). If some - * of the networks are more desirable, this field can be used to change - * the order in which wpa_supplicant goes through the networks when - * selecting a BSS. The priority groups will be iterated in decreasing - * priority (i.e., the larger the priority value, the sooner the - * network is matched against the scan results). Within each priority - * group, networks will be selected based on security policy, signal - * strength, etc. - * - * Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are - * not using this priority to select the order for scanning. Instead, - * they try the networks in the order that used in the configuration - * file. - */ - int priority; - - /** - * ssid - Service set identifier (network name) - * - * This is the SSID for the network. For wireless interfaces, this is - * used to select which network will be used. If set to %NULL (or - * ssid_len=0), any SSID can be used. For wired interfaces, this must - * be set to %NULL. Note: SSID may contain any characters, even nul - * (ASCII 0) and as such, this should not be assumed to be a nul - * terminated string. ssid_len defines how many characters are valid - * and the ssid field is not guaranteed to be nul terminated. - */ - u8 *ssid; - - /** - * ssid_len - Length of the SSID - */ - size_t ssid_len; - - /** - * bssid - BSSID - * - * If set, this network block is used only when associating with the AP - * using the configured BSSID - * - * If this is a persistent P2P group (disabled == 2), this is the GO - * Device Address. - */ - u8 bssid[ETH_ALEN]; - - /** - * bssid_ignore - List of inacceptable BSSIDs - */ - u8 *bssid_ignore; - size_t num_bssid_ignore; - - /** - * bssid_accept - List of acceptable BSSIDs - */ - u8 *bssid_accept; - size_t num_bssid_accept; - - /** - * bssid_set - Whether BSSID is configured for this network - */ - int bssid_set; - - /** - * bssid_hint - BSSID hint - * - * If set, this is configured to the driver as a preferred initial BSSID - * while connecting to this network. - */ - u8 bssid_hint[ETH_ALEN]; - - /** - * bssid_hint_set - Whether BSSID hint is configured for this network - */ - int bssid_hint_set; - - /** - * go_p2p_dev_addr - GO's P2P Device Address or all zeros if not set - */ - u8 go_p2p_dev_addr[ETH_ALEN]; - - /** - * psk - WPA pre-shared key (256 bits) - */ - u8 psk[32]; - - /** - * psk_set - Whether PSK field is configured - */ - int psk_set; - - /** - * passphrase - WPA ASCII passphrase - * - * If this is set, psk will be generated using the SSID and passphrase - * configured for the network. ASCII passphrase must be between 8 and - * 63 characters (inclusive). - */ - char *passphrase; - - /** - * sae_password - SAE password - * - * This parameter can be used to set a password for SAE. By default, the - * passphrase value is used if this separate parameter is not used, but - * passphrase follows the WPA-PSK constraints (8..63 characters) even - * though SAE passwords do not have such constraints. - */ - char *sae_password; - - /** - * sae_password_id - SAE password identifier - * - * This parameter can be used to identify a specific SAE password. If - * not included, the default SAE password is used instead. - */ - char *sae_password_id; - - struct sae_pt *pt; - - /** - * ext_psk - PSK/passphrase name in external storage - * - * If this is set, PSK/passphrase will be fetched from external storage - * when requesting association with the network. - */ - char *ext_psk; - - /** - * mem_only_psk - Whether to keep PSK/passphrase only in memory - * - * 0 = allow psk/passphrase to be stored to the configuration file - * 1 = do not store psk/passphrase to the configuration file - */ - int mem_only_psk; - - /** - * pairwise_cipher - Bitfield of allowed pairwise ciphers, WPA_CIPHER_* - */ - int pairwise_cipher; - - /** - * group_cipher - Bitfield of allowed group ciphers, WPA_CIPHER_* - */ - int group_cipher; - - /** - * group_mgmt_cipher - Bitfield of allowed group management ciphers - * - * This is a bitfield of WPA_CIPHER_AES_128_CMAC and WPA_CIPHER_BIP_* - * values. If 0, no constraint is used for the cipher, i.e., whatever - * the AP uses is accepted. - */ - int group_mgmt_cipher; - - /** - * key_mgmt - Bitfield of allowed key management protocols - * - * WPA_KEY_MGMT_* - */ - int key_mgmt; - - /** - * bg_scan_period - Background scan period in seconds, 0 to disable, or - * -1 to indicate no change to default driver configuration - */ - int bg_scan_period; - - /** - * proto - Bitfield of allowed protocols, WPA_PROTO_* - */ - int proto; - - /** - * auth_alg - Bitfield of allowed authentication algorithms - * - * WPA_AUTH_ALG_* - */ - int auth_alg; - - /** - * scan_ssid - Scan this SSID with Probe Requests - * - * scan_ssid can be used to scan for APs using hidden SSIDs. - * Note: Many drivers do not support this. ap_mode=2 can be used with - * such drivers to use hidden SSIDs. Note2: Most nl80211-based drivers - * do support scan_ssid=1 and that should be used with them instead of - * ap_scan=2. - */ - int scan_ssid; - -#ifdef IEEE8021X_EAPOL -#define EAPOL_FLAG_REQUIRE_KEY_UNICAST BIT(0) -#define EAPOL_FLAG_REQUIRE_KEY_BROADCAST BIT(1) - /** - * eapol_flags - Bit field of IEEE 802.1X/EAPOL options (EAPOL_FLAG_*) - */ - int eapol_flags; - - /** - * eap - EAP peer configuration for this network - */ - struct eap_peer_config eap; -#endif /* IEEE8021X_EAPOL */ - -#ifdef CONFIG_WEP -#define NUM_WEP_KEYS 4 -#define MAX_WEP_KEY_LEN 16 - /** - * wep_key - WEP keys - */ - u8 wep_key[NUM_WEP_KEYS][MAX_WEP_KEY_LEN]; - - /** - * wep_key_len - WEP key lengths - */ - size_t wep_key_len[NUM_WEP_KEYS]; - - /** - * wep_tx_keyidx - Default key index for TX frames using WEP - */ - int wep_tx_keyidx; -#endif /* CONFIG_WEP */ - - /** - * proactive_key_caching - Enable proactive key caching - * - * This field can be used to enable proactive key caching which is also - * known as opportunistic PMKSA caching for WPA2. This is disabled (0) - * by default unless default value is changed with the global okc=1 - * parameter. Enable by setting this to 1. - * - * Proactive key caching is used to make supplicant assume that the APs - * are using the same PMK and generate PMKSA cache entries without - * doing RSN pre-authentication. This requires support from the AP side - * and is normally used with wireless switches that co-locate the - * authenticator. - * - * Internally, special value -1 is used to indicate that the parameter - * was not specified in the configuration (i.e., default behavior is - * followed). - */ - int proactive_key_caching; - - /** - * mixed_cell - Whether mixed cells are allowed - * - * This option can be used to configure whether so called mixed cells, - * i.e., networks that use both plaintext and encryption in the same - * SSID, are allowed. This is disabled (0) by default. Enable by - * setting this to 1. - */ - int mixed_cell; - -#ifdef IEEE8021X_EAPOL - - /** - * leap - Number of EAP methods using LEAP - * - * This field should be set to 1 if LEAP is enabled. This is used to - * select IEEE 802.11 authentication algorithm. - */ - int leap; - - /** - * non_leap - Number of EAP methods not using LEAP - * - * This field should be set to >0 if any EAP method other than LEAP is - * enabled. This is used to select IEEE 802.11 authentication - * algorithm. - */ - int non_leap; - - /** - * eap_workaround - EAP workarounds enabled - * - * wpa_supplicant supports number of "EAP workarounds" to work around - * interoperability issues with incorrectly behaving authentication - * servers. This is recommended to be enabled by default because some - * of the issues are present in large number of authentication servers. - * - * Strict EAP conformance mode can be configured by disabling - * workarounds with eap_workaround = 0. - */ - unsigned int eap_workaround; - -#endif /* IEEE8021X_EAPOL */ - - /** - * mode - IEEE 802.11 operation mode (Infrastucture/IBSS) - * - * 0 = infrastructure (Managed) mode, i.e., associate with an AP. - * - * 1 = IBSS (ad-hoc, peer-to-peer) - * - * 2 = AP (access point) - * - * 3 = P2P Group Owner (can be set in the configuration file) - * - * 4 = P2P Group Formation (used internally; not in configuration - * files) - * - * 5 = Mesh - * - * Note: IBSS can only be used with key_mgmt NONE (plaintext and static - * WEP) and WPA-PSK (with proto=RSN). In addition, key_mgmt=WPA-NONE - * (fixed group key TKIP/CCMP) is available for backwards compatibility, - * but its use is deprecated. WPA-None requires following network block - * options: proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or - * CCMP, but not both), and psk must also be set (either directly or - * using ASCII passphrase). - */ - enum wpas_mode mode; - - /** - * pbss - Whether to use PBSS. Relevant to DMG networks only. - * 0 = do not use PBSS - * 1 = use PBSS - * 2 = don't care (not allowed in AP mode) - * Used together with mode configuration. When mode is AP, it - * means to start a PCP instead of a regular AP. When mode is INFRA it - * means connect to a PCP instead of AP. In this mode you can also - * specify 2 (don't care) meaning connect to either AP or PCP. - * P2P_GO and P2P_GROUP_FORMATION modes must use PBSS in DMG network. - */ - int pbss; - - /** - * disabled - Whether this network is currently disabled - * - * 0 = this network can be used (default). - * 1 = this network block is disabled (can be enabled through - * ctrl_iface, e.g., with wpa_cli or wpa_gui). - * 2 = this network block includes parameters for a persistent P2P - * group (can be used with P2P ctrl_iface commands) - */ - int disabled; - - /** - * disabled_for_connect - Whether this network was temporarily disabled - * - * This flag is used to reenable all the temporarily disabled networks - * after either the success or failure of a WPS connection. - */ - int disabled_for_connect; - - /** - * id_str - Network identifier string for external scripts - * - * This value is passed to external ctrl_iface monitors in - * WPA_EVENT_CONNECTED event and wpa_cli sets this as WPA_ID_STR - * environment variable for action scripts. - */ - char *id_str; - - /** - * ieee80211w - Whether management frame protection is enabled - * - * This value is used to configure policy for management frame - * protection (IEEE 802.11w). 0 = disabled, 1 = optional, 2 = required. - * This is disabled by default unless the default value has been changed - * with the global pmf=1/2 parameter. - * - * Internally, special value 3 is used to indicate that the parameter - * was not specified in the configuration (i.e., default behavior is - * followed). - */ - enum mfp_options ieee80211w; - -#ifdef CONFIG_OCV - /** - * ocv - Enable/disable operating channel validation - * - * If this parameter is set to 1, stations will exchange OCI element - * to cryptographically verify the operating channel. Setting this - * parameter to 0 disables this option. Default value: 0. - */ - int ocv; -#endif /* CONFIG_OCV */ - - /** - * frequency - Channel frequency in megahertz (MHz) for IBSS - * - * This value is used to configure the initial channel for IBSS (adhoc) - * networks, e.g., 2412 = IEEE 802.11b/g channel 1. It is ignored in - * the infrastructure mode. In addition, this value is only used by the - * station that creates the IBSS. If an IBSS network with the - * configured SSID is already present, the frequency of the network - * will be used instead of this configured value. - */ - int frequency; - - /** - * enable_edmg - Enable EDMG feature in STA/AP mode - * - * This flag is used for enabling the EDMG capability in STA/AP mode. - */ - int enable_edmg; - - /** - * edmg_channel - EDMG channel number - * - * This value is used to configure the EDMG channel bonding feature. - * In AP mode it defines the EDMG channel to start the AP on. - * in STA mode it defines the EDMG channel to use for connection - * (if supported by AP). - */ - u8 edmg_channel; - - /** - * fixed_freq - Use fixed frequency for IBSS - */ - int fixed_freq; - -#ifdef CONFIG_ACS - /** - * ACS - Automatic Channel Selection for AP mode - * - * If present, it will be handled together with frequency. - * frequency will be used to determine hardware mode only, when it is - * used for both hardware mode and channel when used alone. This will - * force the channel to be set to 0, thus enabling ACS. - */ - int acs; -#endif /* CONFIG_ACS */ - - /** - * mesh_basic_rates - BSS Basic rate set for mesh network - * - */ - int *mesh_basic_rates; - - /** - * Mesh network plink parameters - */ - int dot11MeshMaxRetries; - int dot11MeshRetryTimeout; /* msec */ - int dot11MeshConfirmTimeout; /* msec */ - int dot11MeshHoldingTimeout; /* msec */ - - /** - * Mesh network layer-2 forwarding (dot11MeshForwarding) - */ - int mesh_fwding; - - int ht; - int ht40; - - int vht; - - int he; - - int max_oper_chwidth; - - unsigned int vht_center_freq1; - unsigned int vht_center_freq2; - - /** - * wpa_ptk_rekey - Maximum lifetime for PTK in seconds - * - * This value can be used to enforce rekeying of PTK to mitigate some - * attacks against TKIP deficiencies. - */ - int wpa_ptk_rekey; - - /** wpa_deny_ptk0_rekey - Control PTK0 rekeying - * - * Rekeying a pairwise key using only keyid 0 (PTK0 rekey) has many - * broken implementations and should be avoided when using or - * interacting with one. - * - * 0 = always rekey when configured/instructed - * 1 = only rekey when the local driver is explicitly indicating it can - * perform this operation without issues - * 2 = never allow PTK0 rekeys - */ - enum ptk0_rekey_handling wpa_deny_ptk0_rekey; - - /** - * group_rekey - Group rekeying time in seconds - * - * This value, if non-zero, is used as the dot11RSNAConfigGroupRekeyTime - * parameter when operating in Authenticator role in IBSS. - */ - int group_rekey; - - /** - * scan_freq - Array of frequencies to scan or %NULL for all - * - * This is an optional zero-terminated array of frequencies in - * megahertz (MHz) to include in scan requests when searching for this - * network. This can be used to speed up scanning when the network is - * known to not use all possible channels. - */ - int *scan_freq; - - /** - * bgscan - Background scan and roaming parameters or %NULL if none - * - * This is an optional set of parameters for background scanning and - * roaming within a network (ESS) in following format: - * <bgscan module name>:<module parameters> - */ - char *bgscan; - - /** - * ignore_broadcast_ssid - Hide SSID in AP mode - * - * Send empty SSID in beacons and ignore probe request frames that do - * not specify full SSID, i.e., require stations to know SSID. - * default: disabled (0) - * 1 = send empty (length=0) SSID in beacon and ignore probe request - * for broadcast SSID - * 2 = clear SSID (ASCII 0), but keep the original length (this may be - * required with some clients that do not support empty SSID) and - * ignore probe requests for broadcast SSID - */ - int ignore_broadcast_ssid; - - /** - * freq_list - Array of allowed frequencies or %NULL for all - * - * This is an optional zero-terminated array of frequencies in - * megahertz (MHz) to allow for selecting the BSS. If set, scan results - * that do not match any of the specified frequencies are not - * considered when selecting a BSS. - */ - int *freq_list; - - /** - * p2p_client_list - List of P2P Clients in a persistent group (GO) - * - * This is a list of P2P Clients (P2P Device Address) that have joined - * the persistent group. This is maintained on the GO for persistent - * group entries (disabled == 2). - */ - u8 *p2p_client_list; - - /** - * num_p2p_clients - Number of entries in p2p_client_list - */ - size_t num_p2p_clients; - -#ifndef P2P_MAX_STORED_CLIENTS -#define P2P_MAX_STORED_CLIENTS 100 -#endif /* P2P_MAX_STORED_CLIENTS */ - - /** - * psk_list - Per-client PSKs (struct psk_list_entry) - */ - struct dl_list psk_list; - - /** - * p2p_group - Network generated as a P2P group (used internally) - */ - int p2p_group; - - /** - * p2p_persistent_group - Whether this is a persistent group - */ - int p2p_persistent_group; - - /** - * temporary - Whether this network is temporary and not to be saved - */ - int temporary; - - /** - * export_keys - Whether keys may be exported - * - * This attribute will be set when keys are determined through - * WPS or similar so that they may be exported. - */ - int export_keys; - -#ifdef CONFIG_HT_OVERRIDES - /** - * disable_ht - Disable HT (IEEE 802.11n) for this network - * - * By default, use it if it is available, but this can be configured - * to 1 to have it disabled. - */ - int disable_ht; - - /** - * disable_ht40 - Disable HT40 for this network - * - * By default, use it if it is available, but this can be configured - * to 1 to have it disabled. - */ - int disable_ht40; - - /** - * disable_sgi - Disable SGI (Short Guard Interval) for this network - * - * By default, use it if it is available, but this can be configured - * to 1 to have it disabled. - */ - int disable_sgi; - - /** - * disable_ldpc - Disable LDPC for this network - * - * By default, use it if it is available, but this can be configured - * to 1 to have it disabled. - */ - int disable_ldpc; - - /** - * ht40_intolerant - Indicate 40 MHz intolerant for this network - */ - int ht40_intolerant; - - /** - * disable_max_amsdu - Disable MAX A-MSDU - * - * A-MDSU will be 3839 bytes when disabled, or 7935 - * when enabled (assuming it is otherwise supported) - * -1 (default) means do not apply any settings to the kernel. - */ - int disable_max_amsdu; - - /** - * ampdu_factor - Maximum A-MPDU Length Exponent - * - * Value: 0-3, see 7.3.2.56.3 in IEEE Std 802.11n-2009. - */ - int ampdu_factor; - - /** - * ampdu_density - Minimum A-MPDU Start Spacing - * - * Value: 0-7, see 7.3.2.56.3 in IEEE Std 802.11n-2009. - */ - int ampdu_density; - - /** - * ht_mcs - Allowed HT-MCS rates, in ASCII hex: ffff0000... - * - * By default (empty string): Use whatever the OS has configured. - */ - char *ht_mcs; - - /** - * tx_stbc - Indicate STBC support for TX streams - * - * Value: -1..1, by default (-1): use whatever the OS or card has - * configured. See IEEE Std 802.11-2016, 9.4.2.56.2. - */ - int tx_stbc; - - /** - * rx_stbc - Indicate STBC support for RX streams - * - * Value: -1..3, by default (-1): use whatever the OS or card has - * configured. See IEEE Std 802.11-2016, 9.4.2.56.2. - */ - int rx_stbc; -#endif /* CONFIG_HT_OVERRIDES */ - -#ifdef CONFIG_VHT_OVERRIDES - /** - * disable_vht - Disable VHT (IEEE 802.11ac) for this network - * - * By default, use it if it is available, but this can be configured - * to 1 to have it disabled. - */ - int disable_vht; - - /** - * vht_capa - VHT capabilities to use - */ - unsigned int vht_capa; - - /** - * vht_capa_mask - mask for VHT capabilities - */ - unsigned int vht_capa_mask; - - int vht_rx_mcs_nss_1, vht_rx_mcs_nss_2, - vht_rx_mcs_nss_3, vht_rx_mcs_nss_4, - vht_rx_mcs_nss_5, vht_rx_mcs_nss_6, - vht_rx_mcs_nss_7, vht_rx_mcs_nss_8; - int vht_tx_mcs_nss_1, vht_tx_mcs_nss_2, - vht_tx_mcs_nss_3, vht_tx_mcs_nss_4, - vht_tx_mcs_nss_5, vht_tx_mcs_nss_6, - vht_tx_mcs_nss_7, vht_tx_mcs_nss_8; -#endif /* CONFIG_VHT_OVERRIDES */ - -#ifdef CONFIG_HE_OVERRIDES - /** - * disable_he - Disable HE (IEEE 802.11ax) for this network - * - * By default, use it if it is available, but this can be configured - * to 1 to have it disabled. - */ - int disable_he; -#endif /* CONFIG_HE_OVERRIDES */ - - /** - * ap_max_inactivity - Timeout in seconds to detect STA's inactivity - * - * This timeout value is used in AP mode to clean up inactive stations. - * By default: 300 seconds. - */ - int ap_max_inactivity; - - /** - * dtim_period - DTIM period in Beacon intervals - * By default: 2 - */ - int dtim_period; - - /** - * beacon_int - Beacon interval (default: 100 TU) - */ - int beacon_int; - - /** - * auth_failures - Number of consecutive authentication failures - */ - unsigned int auth_failures; - - /** - * disabled_until - Network block disabled until this time if non-zero - */ - struct os_reltime disabled_until; - - /** - * parent_cred - Pointer to parent wpa_cred entry - * - * This pointer can be used to delete temporary networks when a wpa_cred - * that was used to create them is removed. This pointer should not be - * dereferences since it may not be updated in all cases. - */ - void *parent_cred; - -#ifdef CONFIG_MACSEC - /** - * macsec_policy - Determines the policy for MACsec secure session - * - * 0: MACsec not in use (default) - * 1: MACsec enabled - Should secure, accept key server's advice to - * determine whether to use a secure session or not. - */ - int macsec_policy; - - /** - * macsec_integ_only - Determines how MACsec are transmitted - * - * This setting applies only when MACsec is in use, i.e., - * - macsec_policy is enabled - * - the key server has decided to enable MACsec - * - * 0: Encrypt traffic (default) - * 1: Integrity only - */ - int macsec_integ_only; - - /** - * macsec_replay_protect - Enable MACsec replay protection - * - * This setting applies only when MACsec is in use, i.e., - * - macsec_policy is enabled - * - the key server has decided to enable MACsec - * - * 0: Replay protection disabled (default) - * 1: Replay protection enabled - */ - int macsec_replay_protect; - - /** - * macsec_replay_window - MACsec replay protection window - * - * A window in which replay is tolerated, to allow receipt of frames - * that have been misordered by the network. - * - * This setting applies only when MACsec replay protection active, i.e., - * - macsec_replay_protect is enabled - * - the key server has decided to enable MACsec - * - * 0: No replay window, strict check (default) - * 1..2^32-1: number of packets that could be misordered - */ - u32 macsec_replay_window; - - /** - * macsec_port - MACsec port (in SCI) - * - * Port component of the SCI. - * - * Range: 1-65534 (default: 1) - */ - int macsec_port; - - /** - * mka_priority - Priority of MKA Actor - * - * Range: 0-255 (default: 255) - */ - int mka_priority; - - /** - * mka_ckn - MKA pre-shared CKN - */ -#define MACSEC_CKN_MAX_LEN 32 - size_t mka_ckn_len; - u8 mka_ckn[MACSEC_CKN_MAX_LEN]; - - /** - * mka_cak - MKA pre-shared CAK - */ -#define MACSEC_CAK_MAX_LEN 32 - size_t mka_cak_len; - u8 mka_cak[MACSEC_CAK_MAX_LEN]; - -#define MKA_PSK_SET_CKN BIT(0) -#define MKA_PSK_SET_CAK BIT(1) -#define MKA_PSK_SET (MKA_PSK_SET_CKN | MKA_PSK_SET_CAK) - /** - * mka_psk_set - Whether mka_ckn and mka_cak are set - */ - u8 mka_psk_set; -#endif /* CONFIG_MACSEC */ - -#ifdef CONFIG_HS20 - int update_identifier; - - /** - * roaming_consortium_selection - Roaming Consortium Selection - * - * The matching Roaming Consortium OI that was used to generate this - * network profile. - */ - u8 *roaming_consortium_selection; - - /** - * roaming_consortium_selection_len - roaming_consortium_selection len - */ - size_t roaming_consortium_selection_len; -#endif /* CONFIG_HS20 */ - - unsigned int wps_run; - - /** - * mac_addr - MAC address policy - * - * 0 = use permanent MAC address - * 1 = use random MAC address for each ESS connection - * 2 = like 1, but maintain OUI (with local admin bit set) - * - * Internally, special value -1 is used to indicate that the parameter - * was not specified in the configuration (i.e., default behavior is - * followed). - */ - int mac_addr; - - /** - * no_auto_peer - Do not automatically peer with compatible mesh peers - * - * When unset, the reception of a beacon from a another mesh peer in - * this MBSS will trigger a peering attempt. - */ - int no_auto_peer; - - /** - * mesh_rssi_threshold - Set mesh parameter mesh_rssi_threshold (dBm) - * - * -255..-1 = threshold value in dBm - * 0 = not using RSSI threshold - * 1 = do not change driver default - */ - int mesh_rssi_threshold; - - /** - * wps_disabled - WPS disabled in AP mode - * - * 0 = WPS enabled and configured (default) - * 1 = WPS disabled - */ - int wps_disabled; - - /** - * fils_dh_group - FILS DH Group - * - * 0 = PFS disabled with FILS shared key authentication - * 1-65535 DH Group to use for FILS PFS - */ - int fils_dh_group; - - /** - * dpp_connector - DPP Connector (signedConnector as string) - */ - char *dpp_connector; - - /** - * dpp_netaccesskey - DPP netAccessKey (own private key) - */ - u8 *dpp_netaccesskey; - - /** - * dpp_netaccesskey_len - DPP netAccessKey length in octets - */ - size_t dpp_netaccesskey_len; - - /** - * net_access_key_expiry - DPP netAccessKey expiry in UNIX time stamp - * - * 0 indicates no expiration. - */ - unsigned int dpp_netaccesskey_expiry; - - /** - * dpp_csign - C-sign-key (Configurator public key) - */ - u8 *dpp_csign; - - /** - * dpp_csign_len - C-sign-key length in octets - */ - size_t dpp_csign_len; - - /** - * dpp_pp_key - ppKey (Configurator privacy protection public key) - */ - u8 *dpp_pp_key; - - /** - * dpp_pp_key_len - ppKey length in octets - */ - size_t dpp_pp_key_len; - - /** - * dpp_pfs - DPP PFS - * 0: allow PFS to be used or not used - * 1: require PFS to be used (note: not compatible with DPP R1) - * 2: do not allow PFS to be used - */ - int dpp_pfs; - - /** - * dpp_pfs_fallback - DPP PFS fallback selection - * - * This is an internally used variable (i.e., not used in external - * configuration) to track state of the DPP PFS fallback mechanism. - */ - int dpp_pfs_fallback; - - /** - * owe_group - OWE DH Group - * - * 0 = use default (19) first and then try all supported groups one by - * one if AP rejects the selected group - * 1-65535 DH Group to use for OWE - * - * Groups 19 (NIST P-256), 20 (NIST P-384), and 21 (NIST P-521) are - * currently supported. - */ - int owe_group; - - /** - * owe_only - OWE-only mode (disable transition mode) - * - * 0 = enable transition mode (allow connection to either OWE or open - * BSS) - * 1 = disable transition mode (allow connection only with OWE) - */ - int owe_only; - - /** - * owe_ptk_workaround - OWE PTK derivation workaround - * - * Initial OWE implementation used SHA256 when deriving the PTK for all - * OWE groups. This was supposed to change to SHA384 for group 20 and - * SHA512 for group 21. This parameter can be used to enable older - * behavior mainly for testing purposes. There is no impact to group 19 - * behavior, but if enabled, this will make group 20 and 21 cases use - * SHA256-based PTK derivation which will not work with the updated - * OWE implementation on the AP side. - */ - int owe_ptk_workaround; - - /** - * owe_transition_bss_select_count - OWE transition BSS select count - * - * This is an internally used variable (i.e., not used in external - * configuration) to track the number of selection attempts done for - * OWE BSS in transition mode. This allows fallback to an open BSS if - * the selection attempts for OWE BSS exceed the configured threshold. - */ - int owe_transition_bss_select_count; - - /** - * multi_ap_backhaul_sta - Multi-AP backhaul STA - * 0 = normal (non-Multi-AP) station - * 1 = Multi-AP backhaul station - */ - int multi_ap_backhaul_sta; - - /** - * ft_eap_pmksa_caching - Whether FT-EAP PMKSA caching is allowed - * 0 = do not try to use PMKSA caching with FT-EAP - * 1 = try to use PMKSA caching with FT-EAP - * - * This controls whether to try to use PMKSA caching with FT-EAP for the - * FT initial mobility domain association. - */ - int ft_eap_pmksa_caching; - - /** - * beacon_prot - Whether Beacon protection is enabled - * - * This depends on management frame protection (ieee80211w) being - * enabled. - */ - int beacon_prot; - - /** - * transition_disable - Transition Disable indication - * The AP can notify authenticated stations to disable transition mode - * in their network profiles when the network has completed transition - * steps, i.e., once sufficiently large number of APs in the ESS have - * been updated to support the more secure alternative. When this - * indication is used, the stations are expected to automatically - * disable transition mode and less secure security options. This - * includes use of WEP, TKIP (including use of TKIP as the group - * cipher), and connections without PMF. - * Bitmap bits: - * bit 0 (0x01): WPA3-Personal (i.e., disable WPA2-Personal = WPA-PSK - * and only allow SAE to be used) - * bit 1 (0x02): SAE-PK (disable SAE without use of SAE-PK) - * bit 2 (0x04): WPA3-Enterprise (move to requiring PMF) - * bit 3 (0x08): Enhanced Open (disable use of open network; require - * OWE) - */ - u8 transition_disable; - - /** - * sae_pk - SAE-PK mode - * 0 = automatic SAE/SAE-PK selection based on password; enable - * transition mode (allow SAE authentication without SAE-PK) - * 1 = SAE-PK only (disable transition mode; allow SAE authentication - * only with SAE-PK) - * 2 = disable SAE-PK (allow SAE authentication only without SAE-PK) - */ - enum sae_pk_mode sae_pk; - - /** - * was_recently_reconfigured - Whether this SSID config has been changed - * recently - * - * This is an internally used variable, i.e., not used in external - * configuration. - */ - bool was_recently_reconfigured; - - /** - * sae_pwe - SAE mechanism for PWE derivation - * - * Internally, special value 4 (DEFAULT_SAE_PWE) is used to indicate - * that the parameter is not set and the global sae_pwe value needs to - * be considered. - * - * 0 = hunting-and-pecking loop only - * 1 = hash-to-element only - * 2 = both hunting-and-pecking loop and hash-to-element enabled - */ - int sae_pwe; -}; - -#endif /* CONFIG_SSID_H */ |