aboutsummaryrefslogtreecommitdiff
path: root/release/arm/CUBOX-HUMMINGBOARD.conf
Commit message (Collapse)AuthorAgeFilesLines
* Release: arm: Remove config for old boardsEmmanuel Vadot2020-11-241-26/+0
| | | | | | | | | | | | All those board are impossible to buy nowadays and could boot using the GENERICSD image after putting the correct u-boot on them. Reviewed by: imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D27282 Notes: svn path=/head/; revision=367994
* release: arm: Always boot armv6/v7 image with EFIEmmanuel Vadot2018-07-311-7/+0
| | | | | | | | | | | | | | | | | | boot.scr is a u-boot script that loads and execute ubldr.bin If not present u-boot will automatically boot loader.efi which is already installed. This means that all armv6/armv7 images are now booted via EFI Tested-On: RPI-B Tested-On: RPI2 Tested-On: OrangePi One Tested-On: All lot of other boards MFC after: Never Relnotes: yes Notes: svn path=/head/; revision=336998
* release: Restore copy of boot.scr for some boardEmmanuel Vadot2018-07-311-9/+2
| | | | | | | | | | | | | | This is not a problem for 12-CURRENT as EFI boot works but it doesn't for 11. While here some board arm_install_uboot also copy ubldr.bin et create firstboot files but it's already done in arm_install_boot Reviewed by: gjb MFC after: 3 days Differential Revision: https://reviews.freebsd.org/D16481 Notes: svn path=/head/; revision=336997
* release: arm: Use GENERIC kernel for IMX6 based boardsEmmanuel Vadot2018-07-311-1/+1
| | | | | | | | | | Switch the IMX.6 based board to GENERIC the kernel config. Reviewed by: gjb Differential Revision: https://reviews.freebsd.org/D16511 Notes: svn path=/head/; revision=336992
* release: arm: Copy boot.scr from portsEmmanuel Vadot2018-03-261-0/+1
| | | | | | | | | | | Latest u-boot update need u-boot script to load and start ubldr. (See D14230 for more details) Copy this file for our arm release on the fat partition. Approved by: gjb Notes: svn path=/head/; revision=331562
* Sort variables for consistency.Glen Barber2017-11-171-5/+5
| | | | | | | Sponsored by: The FreeBSD Foundation Notes: svn path=/head/; revision=325950
* release/arm: Do not install ubldrEmmanuel Vadot2017-11-031-2/+0
| | | | | | | | | | | | ubldr is the non-pie version of ubldr.bin, do not install two copies of the same binary. This will allow us to remove ubldr in the future. All the u-boot ports know how to load ubldr.bin Reviewed by: gjb (earlier version) Notes: svn path=/head/; revision=325373
* Increase the arm/armv6 and arm/armv7 images from 2.5GB to 3GB,Glen Barber2017-10-131-1/+1
| | | | | | | | | | | since the RPI2 (at least) does not fit in 2.5GB. While here, add a missing BOARDNAME to RPI2.conf. Sponsored by: The FreeBSD Foundation Notes: svn path=/head/; revision=324599
* Catch up with r324340, switching relevant arm SoCs from armv6Glen Barber2017-10-061-1/+1
| | | | | | | | | to armv7. Sponsored by: The FreeBSD Foundation Notes: svn path=/head/; revision=324370
* Bump armv6 SoC images to 2.25GB. RPI-B is full, so increase allGlen Barber2017-10-021-1/+1
| | | | | | | | | | image sizes for consistency. Submitted by: manu Sponsored by: The FreeBSD Foundation Notes: svn path=/head/; revision=324209
* - Increase the image size for RPI2 and IMX6-based boards from 1GGlen Barber2017-04-071-2/+2
| | | | | | | | | | | | to 1.5G. - Use the 'conv=sync' dd(1) option to fix writing the u-boot.imx file to the md(4) device for IMX6-based boards. MFC after: 3 days Sponsored by: The FreeBSD Foundation Notes: svn path=/head/; revision=316617
* In addition to the ubldr file, also copy ubldr.bin to theGlen Barber2015-09-291-0/+2
| | | | | | | | | | | | | | | MS-DOS partition. This will help with transitioning to a single arm/armv6 userland build which could be used for all FreeBSD/armv6 images without UBLDR_LOADADDR being set for each board (ultimately requiring a separate buildworld for each currently). Requested by: ian MFC after: 3 days Sponsored by: The FreeBSD Foundation Notes: svn path=/head/; revision=288374
* Increase the FreeBSD/arm image sizes back to 1G for 11-CURRENT.Glen Barber2015-06-181-1/+1
| | | | | | | | | | | | | | | While 480M is sufficient for 10-STABLE, 11-CURRENT images at this size fail due to insufficient space. This commit is solely for the sake of getting updated snapshot builds out, after which I'll analyze the resulting images to figure out what a more sane value is, even if the image size for 11-CURRENT needs to differ from 10-STABLE. Sponsored by: The FreeBSD Foundation Notes: svn path=/head/; revision=284543
* Reduce the arm/armv6 image size from 1G to 480M.Glen Barber2015-06-121-1/+1
| | | | | | | | | | | | | | | | Since the images are effectively mostly zeros at 1G, reduce the size to allow installation on smaller SD cards, such as 512Mb. While here, stop writing the /boot.txt file on the WANDBOARD, which isn't used anyway. Discussed with: imp MFC after: 3 days Sponsored by: The FreeBSD Foundation Notes: svn path=/head/; revision=284333
* Set the correct UBLDR_LOADADDR for the Wandboard andGlen Barber2015-06-061-1/+1
| | | | | | | | | | | Cubox/Hummingboard images. Submitted by: ian MFC after: 3 days Sponsored by: The FreeBSD Foundation Notes: svn path=/head/; revision=284102
* Add a configuration file to support the Cubox/Hummingboard SoC.Glen Barber2015-06-021-0/+39
Sponsored by: The FreeBSD Foundation Notes: svn path=/head/; revision=283920