aboutsummaryrefslogtreecommitdiff
path: root/sys/modules/cxgbe
Commit message (Collapse)AuthorAgeFilesLines
...
* sys/modules: normalize .CURDIR-relative paths to SRCTOPEnji Cooper2017-03-0413-15/+15
| | | | | | | | | | | This simplifies make output/logic Tested with: `cd sys/modules; make ALL_MODULES=` on amd64 MFC after: 1 month Sponsored by: Dell EMC Isilon Notes: svn path=/head/; revision=314651
* cxgbe(4): Update T4, T5 and T6 firmwares to 1.16.26.0. Changelog forNavdeep Parhar2017-01-033-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | all public firmwares for all chips since the last release (1.15.37.0) follows (it's a straight copy-paste from the Release Notes for the 12/30/2016 Unified Wire release on Chelsio's website). T6 Firmware ++++++++++++ Version : 1.16.26.0 Date : 12/28/2016 Fixes ----- BASE: - Max number of egress and control queues adjusted to accomodate co-processor mode queues. - Fixed intermittent DDR3/4 ECC errors. - Fixed a traffic stall when ETS BW is configured as 0%. - Max number of ethctrl queue in VF set to 1. ETH: - Added a new config file option 'speed' under port section to set the port speed. Use only when auto negotiation is off. - FEC option removed from firmware config file. cxgbtool can be used to change the fec setting. - CPL_TX_TNL_LSO cpl handling added in ETH_TX_PKT_VM handler. This fixes large tunnel tcp packet support for VxLAN. Version : 1.16.22.0 Date : 12/05/2016 Fixes ----- BASE: - fw_port_type updated in fw API to match kernel.org definitions. - Saved power by disaling unused MAC lanes. - Configures correct power bin. - Enhanced DDR4 performance. - Enabled interrupts. - Fixed an issue where filter rule for 'unicast hash' is not working. ETH: - Disabled auto negotiation by default because most of 100G switches do not support AN as of today. - Fixed flow control not getting disabled problem. - Fixed an issue where port0 doesn't come up sometimes. - Fixed 10G link not coming up issue. - Fixed an issue with promiscuous mode when dcbx disabled. OFLD: - Fixed a connection stuck issue when abort is received during out of tx pages backpressure. ENHANCEMENTS ------------ BASE: - Added inline TLS mode support. Version : 1.16.12.0 Date : 11/11/2016 ENHANCEMENTS ------------ BASE: - Added T6 support. - Added T6 1G/10G/25G/40G/100G link speeds. - Added T6 co-processor mode crypto support. - Added facility to increase link AN+AEC timeout. OFLD: - Added support for all T5 offload protocols except FCoE. iSCSI: - iscsi completion moderation enabled. ======================================================================= T5 Firmware ++++++++++++ Version : 1.16.26.0 Date : 12/28/2016 FIXES ----- BASE: - Max number of ethctrl queue in VF set to 1. Version : 1.16.22.0 Date : 12/05/2016 FIXES ----- BASE: - Fixed an issue where filter rule for 'unicast hash' is not working. ETH: - Fixed an issue with promiscuous mode when dcbx disabled. ENHANCEMENTS ------------ ETH: - Added 40G-KR support. Version : 1.16.12.0 Date : 11/11/2016 FIXES ----- BASE: - Fixed multiple issues related with VFs FLR processing. - Fixed channel assignment based on number of ports in adapter. - Fixed a crash when VM having PF assigned as passthrough mode is rebooted. - Handled 2nd HELLO command from the same PF without seeing BYE from the same PF and if that is the only PF. - A warning is printed in firmware log if PCI-E cookie generation is enabled in serial initialization file. - Fixed multiple issues related with Filtering. - Enabled DSGL memory write for iscsi and rdma. - Added new FW_PARAMS_CMD[DEV] options to retrieve Serial Configuration and VPD version numbers. - Fixed an issue where LVDS output was not getting enabled using vpd. DCBX: - Fixed DCBX CEE Incorrect class to pririty mapping. - Fixed incorrect interpretation of DCBX IEEE PFC. ETH: - Adjusted the link related delay timings according to the QSFP spec. - Improved 40G link bringup time with few switches. OFLD: - Do not reserve qp/cq if rdma capability is not enabled. - Fixed an issue where approx 1600+ TOE connections were causing a firmware fatal error. FOiSCSI: - Fixed an issue where unloading foiscsi driver causes mailbox timeout. ENHANCEMENTS ------------ BASE: - Added 10G KR/KX support. - Added T540-BT adapter support. - Added 4 new rss key modes for PFs and VFs. OFLD: - Added new WR FW_RI_FR_NSMR_TPTE_WR to improve fast MR write performance in RDMA. Version : 1.16.5.0 Date : 10/26/2016 FIXES ----- BASE: - Fixed multiple issues where FLR from multiple VFs can cause firmware crash. - Fixed channel assignment based on number of ports in adapter. - Fixed the HELLO command master force api to handle the 2nd HELLO correctly without getting BYE from the PF driver. - Added facility to retrieve Serial configuration and VPD version. Two new FW_PARAMS_CMD[DEV] options added to retrieve these values. - Fixed multiple issues where FLR from multiple VFs are not completing. - Added new RSS hash secret key modes. - Fixed an issue where LVDS output was not getting enabled using vpd. DCBX: - Fixed an issue where iscsi tlv is sent incorrectly to host (DCBX CEE). - Fixed an issue where app priority values are not handled correctly in fw (DCBX IEEE). ETH: - Adjusts the link related delay timings according to the QSFP spec. - Changed 2.5G mac speed bit to 25G mac speed bit in fw API. - Improvement in 40G link bringup time with few switches. OFLD: - Do not reserve qp/cq if rdma capability is not enabled. - Fixed an issue where approx 1600+ TOE connections were causing a firmware fatal error. - Fixed DSGL memory write in T5. Now iwarp and iscsi can use DSGL to do memory write. - Fixed multiple issues in hash filter mode where incorrect protocol mask was getting used and affecting hash filter functionality. - New fastpath WR FW_RI_FR_NSMR_TPTE_WR (with fully populated TPTE) is added for small REG_MR operations. FOiSCSI: - Fixed an issue in foiscsi recovery path. - Fixed an issue where foiscsi (in VM in PCIE passthrough mode) didn't come up after VM FLR. ENHANCEMENTS ------------ ETH: - Implemented 1G/10G KR/KX ability. - Implemented T540-BT adapter support. ======================================================================= T4 Firmware +++++++++++ Version : 1.16.12.0 Date : 11/11/2016 FIXES ----- BASE: - Fixed an issue where reading temperature sesors using ldst command causes mailbox timeout. - Added new FW_PARAMS_CMD[DEV] options to retrieve Serial Configuration and VPD version numbers. ETH: - Fixed DCBX CEE Incorrect class to pririty mapping. FOiSCSI: - Fixed an issue where unloading foiscsi driver causes mailbox timeout. MFC after: 3 days Sponsored by: Chelsio Communications Notes: svn path=/head/; revision=311173
* cxgbe(4): Update firmwares from version 1.16.12.0 to 1.16.22.0.Navdeep Parhar2016-12-063-3/+3
| | | | | | | | | Obtained from: Chelsio Communications MFC after: 3 days Sponsored by: Chelsio Communications Notes: svn path=/head/; revision=309613
* cxgbe(4): Include firmware for T6 cards in the driver. Update allNavdeep Parhar2016-11-304-2/+30
| | | | | | | | | | | firmwares to 1.16.12.0. Obtained from: Chelsio Communications MFC after: 3 days Sponsored by: Chelsio Communications Notes: svn path=/head/; revision=309302
* cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards willNavdeep Parhar2016-09-163-0/+24
| | | | | | | | | | | | | come up as 't6nex' nexus devices with 'cc' ports hanging off them. The T6 firmware and configuration files will be added as soon as they are released. For now the driver will try to work with whatever firmware and configuration is on the card's flash. Sponsored by: Chelsio Communications Notes: svn path=/head/; revision=305852
* Chelsio T4/T5 VF driver.John Baldwin2016-09-073-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The cxgbev/cxlv driver supports Virtual Function devices for Chelsio T4 and T4 adapters. The VF devices share most of their code with the existing PF4 driver (cxgbe/cxl) and as such the VF device driver currently depends on the PF4 driver. Similar to the cxgbe/cxl drivers, the VF driver includes a t4vf/t5vf PCI device driver that attaches to the VF device. It then creates child cxgbev/cxlv devices representing ports assigned to the VF. By default, the PF driver assigns a single port to each VF. t4vf_hw.c contains VF-specific routines from the shared code used to fetch VF-specific parameters from the firmware. t4_vf.c contains the VF-specific PCI device driver and includes its own attach routine. VF devices are required to use a different firmware request when transmitting packets (which in turn requires a different CPL message to encapsulate messages). This alternate firmware request does not permit chaining multiple packets in a single message, so each packet results in a firmware request. In addition, the different CPL message requires more detailed information when enabling hardware checksums, so parse_pkt() on VF devices must examine L2 and L3 headers for all packets (not just TSO packets) for VF devices. Finally, L2 checksums on non-UDP/non-TCP packets do not work reliably (the firmware trashes the IPv4 fragment field), so IPv4 checksums for such packets are calculated in software. Most of the other changes in the non-VF-specific code are to expose various variables and functions private to the PF driver so that they can be used by the VF driver. Note that a limited subset of cxgbetool functions are supported on VF devices including register dumps, scheduler classes, and clearing of statistics. In addition, TOE is not supported on VF devices, only for the PF interfaces. Reviewed by: np MFC after: 2 months Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7599 Notes: svn path=/head/; revision=305549
* cxgbe/cxgbei: Retire all DDP related code from cxgbei and switch toNavdeep Parhar2016-09-011-1/+0
| | | | | | | | | | | | routines available in t4_tom to manage the iSCSI DDP page pod region. This adds the ability to use multiple DDP page sizes to the iSCSI driver, among other improvements. Sponsored by: Chelsio Communications Notes: svn path=/head/; revision=305240
* Add a driver to create VF devices on Chelsio T4/T5 NICs.John Baldwin2016-07-221-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Chelsio NICs are a bit unique compared to some other NICs in that they expose different functionality on different physical functions. In particular, PF4 is used to manage the NIC interfaces ('t4nex' and 't5nex'). However, PF4 is not able to create VF devices. Instead, VFs are only supported by physical functions 0 through 3. This commit adds 't4iov' and 't5iov' drivers that attach to PF0-3. One extra wrinkle is that the iov devices cannot enable SR-IOV until the firwmare has been initialized by the main PF4 driver. To handle this case, a new t4_if kobj interface has been added to permit cross-calls between the PF drivers. The PF4 driver notifies sibling drivers when it is fully attached. It also requests sibling drivers to detach before it detaches. Sibling drivers query the PF4 driver during their attach routine to see if it is attached. If not, the sibling drivers defer their attach actions until the PF4 driver informs them it is attached. VF devices are associated with a single port on the NIC. VF devices created from PF0 are associated with the first port on the NIC, VFs from PF1 are associated with the second port, etc. VF devices can only be created from a PF device that has an associated port. Thus, on a 2-port card, VFs are only supported on PF0 and PF1. Reviewed by: np (earlier versions) MFC after: 1 month Sponsored by: Chelsio Communications Notes: svn path=/head/; revision=303205
* cxgbe(4): Update T5 and T4 firmwares to 1.15.37.0.Navdeep Parhar2016-05-132-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These firmwares were obtained from the "Chelsio T5/T4 Unified Wire v2.12.0.3 for Linux" release. Changes since 1.14.4.0 (which is the firmware in -STABLE branches) are in the "Release Notes" accompanying the Unified Wire release and are copy-pasted here as well. 22.1. T5 Firmware +++++++++++++++++++++++++++++++++ Version : 1.15.37.0 Date : 04/27/2016 ================================================================================ FIXES ----- BASE: - Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where the default ingress queue was ignored. - Fixed an issue where adapter failed to load fw by adjusting DRAM frequency. - Fixed an issue in watchdog which was causing VM bring-up failure after reboot. - Fixed 40G link failures with some switches when auto-negotiation enabled. - Fixed to improve on link bring-up time. - Per port buffer groups size doubled to improve performance. - Fixed an issue where bogus d3hot bits were set causing traffic stall. - Fixed an issue where sometimes adapter was not seen after reboot. - Fixed an issue where iWARP was crashing in conjunction with traffic management. - Fixed an issue where link failed to come up after removing twinax cable and inserting optical module. ETH - Fixed a link flap issue on T580-CR. OFLD - Fixed a potential iSCSI data corruption issue by disabling RxFragEn flag. FOiSCSI - Fixed an issue in recovery path where connection was getting closed before recovery processing was done. - Fixed an issue in TCP port reuse. - Fixed an issue in recovery path when large number (>64) of iSCSI connections were in use. - Returned ENETUNREACH if IP was not been provisioned yet and driver tried to use given inerface. - Fixed an issue where fw was sending ENETUNREACH event for normal tcp disconnection. DCBX - Fixed an issue where iscsi tlv is sent incorrectly to host. (DCBX CEE) - Fixed an issue where apply bit set for APP id was affecting the ETS and PFC settings.(DCBX IEEE) - Fixed an issue where app priority values are not handled correctly in fw. (DCBX IEEE) - Fixed an issue where enable/disable dcbx can cause crash. (DCBX CEE,DCBX IEEE) FOFCoE - Removed BB6 support. ENHANCEMENTS ------------ BASE: - Added new interface to program DCA settings in SGE contexts; allow 32-byte IQE size - Added PTP interface fw_ptp_ts to support PTP Frequeny and Offset adjustment. - Added MPS raw interface. ETH: - New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx. OFLD: - WR opcode is returned to host in cqe error response. 22.2. T4 Firmware +++++++++++++++++ Version : 1.15.37.0 Date : 04/27/2016 ================================================================================ FIXES ----- BASE: - Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where default ingress queue was ignored. - Fixed an issue in watchdog which was causing VM bring-up failure after reboot. - Per port buffer groups size doubled to improve performance. - Fixed an issue where iWARP was crashing in conjunction with traffic management. FOiSCSI: - Fixed an issue in recovery path where connection was getting closed before recovery processing was done. - Fixed an issue in TCP port reuse. - Fixed an issue in recovery path when large number (>64) of iSCSI connections were in use. - Returned ENETUNREACH if IP had not been provisioned yet and driver tried to use given inerface. DCBX - Fixed an issue where iscsi tlv is sent incorrectly to host.(DCBX CEE) - Fixed an issue where enable/disable dcbx can cause crash in firmware.(DCBX CEE) FOiSCSI - Fixes an issue where fw was sending ENETUNREACH event for normal tcp disconnection. FOFCoE - Removed BB6 support. ENHANCEMENTS ------------ BASE: - Added MPS raw interface. ETH: - New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx. ================================================================================ Obtained from: Chelsio Communications MFC after: 6 weeks Relnotes: yes Sponsored by: Chelsio Communications Notes: svn path=/head/; revision=299685
* Add a 'show t4 tcb <nexus> <tid>' command to dump a TCB from DDB.John Baldwin2016-04-101-0/+1
| | | | | | | | This allows the contents of a TCB to be extracted from a T4/T5 card in DDB after a panic. Notes: svn path=/head/; revision=297777
* cxgbe(4): Update T5 and T4 firmwares to 1.15.28.0.Navdeep Parhar2016-03-012-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These firmwares were obtained from the beta "Chelsio T5/T4 Unified Wire v2.12.0.2 for Linux" release. Changes since last release are listed in the "Release Notes" accompanying the beta release and are copy-pasted here as well. The plan is to have only GA'd firmwares in any -STABLE FreeBSD branch so I'll MFC this (after 2 months) only if it ends up in a GA release. ================================================================================ ================================================================================ 22.1. T5 Firmware +++++++++++++++++++++++++++++++++ Version : 1.15.28.0 Date : 02/29/2016 ================================================================================ FIXES ----- BASE: - Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where the default ingress queue was ignored. - Fixed an issue where adapter failed to load fw by adjusting DRAM frequency. - Fixed an issue in watchdog which was causing VM bring-up failure after reboot. - Fixed 40G link failures with some switches when auto-negotiation enabled. - Fixed to improve on link bring-up time. - Per port buffer groups size doubled to improve performance. - Fixed an issue where bogus d3hot bits were set causing traffic stall. - Fixed an issue where sometimes adapter was not seen after reboot. - Fixed an issue where iWARP was crashing in conjunction with traffic management. - Fixed an issue where link failed to come up after removing twinax cable and inserting optical module. OFLD - Fixed a potential iSCSI data corruption issue by disabling RxFragEn flag. FOiSCSI - Fixed an issue in recovery path where connection was getting closed before recovery processing was done. - Fixed an issue in TCP port reuse. - Fixed an issue in recovery path when large number (>64) of iSCSI connections were in use. - Returned ENETUNREACH if IP was not been provisioned yet and driver tried to use given inerface. ENHANCEMENTS ------------ BASE: - Added new interface to program DCA settings in SGE contexts; allow 32-byte IQE size - Added PTP interface fw_ptp_ts to support PTP Frequeny and Offset adjustment. - Added MPS raw interface. ETH: - New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx. OFLD: - WR opcode is returned to host in cqe error response. ================================================================================ ================================================================================ 22.2. T4 Firmware +++++++++++++++++ Version : 1.15.28.0 Date : 02/29/2016 ================================================================================ FIXES ----- BASE: - Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where default ingress queue was ignored. - Fixed an issue in watchdog which was causing VM bring-up failure after reboot. - Per port buffer groups size doubled to improve performance. - Fixed an issue where iWARP was crashing in conjunction with traffic management. FOiSCSI: - Fixed an issue in recovery path where connection was getting closed before recovery processing was done. - Fixed an issue in TCP port reuse. - Fixed an issue in recovery path when large number (>64) of iSCSI connections were in use. - Returned ENETUNREACH if IP had not been provisioned yet and driver tried to use given inerface. ENHANCEMENTS ------------ BASE: - Added MPS raw interface. ETH: - New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx. ================================================================================ Obtained from: Chelsio Communications MFC after: 2 months Sponsored by: Chelsio Communications Notes: svn path=/head/; revision=296249
* cxgbei: Hardware accelerated iSCSI target and initiator for TOE capableNavdeep Parhar2015-12-262-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | cards supported by cxgbe(4). On the host side this driver interfaces with the storage stack via the ICL (iSCSI Common Layer) in the kernel. On the wire the traffic is standard iSCSI (SCSI over TCP as per RFC 3720/7143 etc.) that interoperates with all other standards compliant implementations. The driver is layered on top of the TOE driver (t4_tom) and promotes connections being handled by t4_tom to iSCSI ULP (Upper Layer Protocol) mode. Hardware assistance in this mode includes: - Full TCP processing. - iSCSI PDU identification and recovery within the TCP stream. - Header and/or data digest insertion (tx) and verification (rx). - Zero copy (both tx and rx). Man page will follow in a separate commit in a couple of weeks. Relnotes: Yes Sponsored by: Chelsio Communications Notes: svn path=/head/; revision=292740
* Finish process of moving the LinuxKPI module into the default kernel build.Hans Petter Selasky2015-10-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | - Move all files related to the LinuxKPI into sys/compat/linuxkpi and its subfolders. - Update sys/conf/files and some Makefiles to use new file locations. - Added description of COMPAT_LINUXKPI to sys/conf/NOTES which in turn adds the LinuxKPI to all LINT builds. - The LinuxKPI can be added to the kernel by setting the COMPAT_LINUXKPI option. The OFED kernel option no longer builds the LinuxKPI into the kernel. This was done to keep the build rules for the LinuxKPI in sys/conf/files simple. - Extend the LinuxKPI module to include support for USB by moving the Linux USB compat from usb.ko to linuxkpi.ko. - Bump the FreeBSD_version. - A universe kernel build has been done. Reviewed by: np @ (cxgb and cxgbe related changes only) Sponsored by: Mellanox Technologies Notes: svn path=/head/; revision=290135
* cxgbe(4): support for the kernel RSS option.Navdeep Parhar2015-10-161-0/+1
| | | | | | | | | | You need PCBGROUP and RSS in the kernel config to use this. Relnotes: Yes Sponsored by: Chelsio Communications Notes: svn path=/head/; revision=289401
* cxgbe(4): Update T5 and T4 firmwares bundled with the driver to 1.14.4.0. TheNavdeep Parhar2015-08-052-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | changes in the firmwares since 1.11.27.0 are listed here (straight copy-paste from the "Release Notes.txt" accompanying the Chelsio Unified Wire 2.11.1.0 release on the website). 22.1. T5 Firmware +++++++++++++++++++++++++++++++++ Version : 1.14.4.0 Date : 08/05/2015 ================================================================================ FIXES ----- BASE: - Fixes a potential data path hang by properly programming PMTX congestion threshold settings. - Fixes a potential initialization error when accessing a configuration file stored on the flash. - Fixes a regression where SGE resources can be miss-sized if iWARP is disabled. ETH: - Fixes a timing issue that would prevent CR4 links from coming up with some switches. FOFCoE: - Defers fcoe linkdown mailbox command handling till LOGO is sent. - Updates vlan prio for all outstanding IOs during dcbx update. ENHANCEMENTS ------------ BASE: - Adds support for PAUSE OFF watchdog. - Reports devlog access information in PCIE_FW_PF register 7. ETH: - Enhances segmentation offload to include VxLAN and Geneve. - Adds PTP support. - Adds new interface to allow the driver to query the VI rss table base addresses. - Allows the driver to program the SGE ingrext contxt CongDrop field. OFLD: - Adds new interface for the driver to specify offloaded connections TCP snd and rcv scale factors. iSCSI: - Adds support for iscsi segmentatation offload (ISO). - Adds support for iscsi t10-dif offload. FOiSCSI: - Sets FORCE_BIT for cut through processing for FOiSCSI. FOFCoE: - Adds support for FCoE BB6. - Improves WRITE performance. ================================================================================ ================================================================================ Version : 1.13.32.0 Date : 03/25/2015 ================================================================================ FIXES ----- BASE: - Fixes FW_CAPS_CONFIG_CMD return value on error (was positive instead of negative) - Fixes FW_PARAMS_PARAM_DEV_FLOWC_BUFFIFO_SZ indication (was wrong on certain adapter configurations) - Fixes config file based PL_TIMEOUT register programming ETH: - Fixes a potential EO UDP SEG header corruption - Fixes an issue where 1000Base-X was not enabled correctly when using QSA modules OFLD: - Fixes timeout issue with half-open connections - Fixes FW_FLOWC_WR processing when state is set to finwait1 FOFCoE: - Fixes fcoe xchg leaks in linkdown/peer down path - Fixes cleanup in FCoE linkdown and fixed buf timer flowid abuse - Fixes fw crash by clearing fcf flowc during bye FOiSCSI: - Don't create a new tcp socket if ERL0 attempt has timed out. ENHANCEMENTS ------------ BASE: - Adds support for VFs on PFs 4 to 7 - Adds support for QPs/CQs on any physical and virtual function ETH: - Stops sending LACP frames on loopback interface - Adds an AUTOEQU indication to CPL_SGE_EGR_UPDATE - Adds support for CR4 links (BEAN/AEC on 40G TwinAx cables) OFLD: - Improves default settings of LAN and CLUSTER TCP timer settings - Sends Negative Advice CPLs to software FOISCSI: - Adds IPv6 support for foiscsi. Keeps backward compatibility with old foiscsi drivers which doesn't support ipv6. FOFCoE: - Added fcoe debug support in flowc dump ================================================================================ ================================================================================ Version : 1.12.25.0 Date : 10/22/2014 ================================================================================ FIXES ----- BASE: - Improves precision of the Weight Round Robing Traffic Management Algorithm - Fixes an issue where the link would intermittently fail to come up - Fixes an issue where adapters with an external PHY couldn't run at 100Mbps - Fixes an issue where active optical cables were not recognized - Fixes link advertising issues on T520-BT (speed and pause frames) that would cause the link to negotiate unexpected settings - Forces link restart when auto-negotiation is disabled - Fix an issue where pause frames wouldn't be fully disabled even if requested ETH: - Fixes NVGRE Segmentation Offload network header generation. DCBX: - Fixes an issue where some settings were not being sent to the switch correctly - Fixes an issue where back-to-back DCBX port updates could get overwritten by FW - Fixes a firmware crash on DCBX APP information request before link up FOiSCSI: - Fixes abort task leak in tmf response handling - Fixes TCP RST handling while in iSCSI ERL0 - Fixes a firmware crash on BYE without INIT ENHANCEMENTS ------------- BASE: - Adds link partner settings reporting when available - Adds QSA support (in conjunction with QSA VPD) - Adds T520-BT LED support - Reports NOTSUPPORTED for modules with an unhandled identifier DCBX: - Adds version reporting (indicating which version FW is trying to negotiate) - Adds IEEE support - Reports LLDP time outs FOiSCSI: - Add support for multiple iSCSI DDP client - Sends DHCP renew request when lease expires ================================================================================ 22.2. T4 Firmware +++++++++++++++++ Version : 1.14.4.0 Date : 08/05/2015 ================================================================================ FIXES ----- BASE: - Fixes a potential initialization error when accessing a configuration file stored on the flash. - Initialize PCIE_DBG_INDIR_REQ.Enable to 0, as hardware failed to do so and register dumps could result in errors. ETH: - Fixes an issue that sometimes prevented the link from coming up in CR adapters. ENHANCEMENTS ------------ BASE: - Adds support for PAUSE OFF watchdog. - Reports devlog access information in PCIE_FW_PF register 7. ETH: - Adds new interface to allow the driver to query the VI rss table base addresses. OFLD: - Adds new interface for the driver to specify offloaded connections TCP snd and rcv scale factors. ================================================================================ ================================================================================ Version : 1.13.32.0 Date : 03/25/2015 ================================================================================ FIXES ----- BASE: - Fixes FW_CAPS_CONFIG_CMD return value on error (was positive instead of negative) - Fixes FW_PARAMS_PARAM_DEV_FLOWC_BUFFIFO_SZ indication (was wrong on certain adapter configurations) - Fixes config file based PL_TIMEOUT register programming ETH: - Fixes a potential EO UDP SEG header corruption OFLD: - Fixes timeout issue with half-open connections - Fixes FW_FLOWC_WR processing when state is set to finwait1 FOiSCSI: - Don't create a new tcp socket if ERL0 attempt has timed out. ENHANCEMENTS ------------ ETH: - Stops sending LACP frames on loopback interface - Adds an AUTOEQU indication to CPL_SGE_EGR_UPDATE OFLD: - Improves default settings of LAN and CLUSTER TCP timer settings - Sends Negative Advice CPLs to software ================================================================================ ================================================================================ Version : 1.12.25.0 Date : 10/22/2014 ================================================================================ FIXES ----- BASE: - Improves precision of the Weight Round Robing Traffic Management Algorithm - Forces link restart when auto-negotiation is disabled - Fix an issue where pause frames wouldn't be fully disabled even if requested DCBX: - Fixes an issue where some settings were not being sent to the switch correctly - Fixes an issue where back-to-back DCBX port updates could get overwritten by FW - Fixes a firmware crash on DCBX APP information request before link up FOiSCSI: - Fixes abort task leak in tmf response handling - Fixes TCP RST handling while in iSCSI ERL0 - Fixes a firmware crash on BYE without INIT ENHANCEMENTS ------------ BASE: - Adds link partner settings reporting when available - Firmware now reports NOTSUPPORTED for modules with an unhandled identifier DCBX: - Adds version reporting (indicating which version FW is trying to negotiate) - Adds IEEE support - Reports LLDP time outs FOiSCSI: - Adds support for multiple iSCSI DDP clients - Sends DHCP renew request when lease expires ================================================================================ Obtained from: Chelsio Communications MFC after: 2 weeks Sponsored by: Chelsio Communications Notes: svn path=/head/; revision=286338
* cxgbe(4): Update T4 and T5 firmwares to 1.14.2.0.Navdeep Parhar2015-07-142-2/+2
| | | | | | | | Obtained from: Chelsio Communications MFC after: 3 days Notes: svn path=/head/; revision=285527
* Globally enable -fms-extensions when building kernel with gcc, and removeGleb Smirnoff2015-02-171-1/+0
| | | | | | | | | | | | this option from all modules that enable it theirselves. In C mode -fms-extensions option enables anonymous structs and unions, allowing us to use this C11 feature in kernel. Of course, clang supports it without any extra options. Reviewed by: dim Notes: svn path=/head/; revision=278913
* cxgbe(4): Add a minimal if_cxl module that pulls in the real driver asNavdeep Parhar2015-02-062-0/+12
| | | | | | | | | | | | a dependency. This ensures "ifconfig cxl<n> ..." does the right thing even when it's run with no driver loaded. if_cxl.ko is the tiniest module in /boot/kernel. MFC after: 2 weeks Notes: svn path=/head/; revision=278303
* Make sure the compiler flag to get cxgbe(4) to compile with gcc is usedNavdeep Parhar2015-01-241-1/+2
| | | | | | | | | only when gcc is being used. This is what r277225 should have been. Suggested by: dim@ Notes: svn path=/head/; revision=277637
* Make cxgbe(4) buildable with the gcc in base.Navdeep Parhar2015-01-161-1/+1
| | | | Notes: svn path=/head/; revision=277225
* cxgbe(4): major tx rework.Navdeep Parhar2014-12-311-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months Notes: svn path=/head/; revision=276485
* Remove dependence on source tree options. Move all kernel moduleWarner Losh2014-08-111-1/+2
| | | | | | | | | | | | | | | | | | | | | options into kern.opts.mk and change all the places where we use src.opts.mk to pull in the options. Conditionally define SYSDIR and use SYSDIR/conf/kern.opts.mk instead of a CURDIR path. Replace all instances of CURDIR/../../etc with STSDIR, but only in the affected files. As a special compatibility hack, include bsd.owm.mk at the top of kern.opts.mk to allow the bare build of sys/modules to work on older systems. If the defaults ever change between 9.x, 10.x and current for these options, however, you'll wind up with the host OS' defaults rather than the -current defaults. This hack will be removed when we no longer need to support this build scenario. Reviewed by: jhb Differential Revision: https://phabric.freebsd.org/D529 Notes: svn path=/head/; revision=269812
* Move most of the 15 variations on generating opt_inet.h andWarner Losh2014-08-043-45/+0
| | | | | | | | | opt_inet6.h into kmod.mk by forcing almost everybody to eat the same dogfood. While at it, consolidate the opt_bpf.h and opt_mroute.h targets here too. Notes: svn path=/head/; revision=269540
* List one file per line in the Makefiles. This makes it easier to readNavdeep Parhar2014-08-013-11/+41
| | | | | | | | | diffs when a file is added or removed. MFC after: 2 weeks Notes: svn path=/head/; revision=269366
* Improve compliance with style.Makefile(5).Navdeep Parhar2014-08-016-40/+41
| | | | | | | MFC after: 2 weeks Notes: svn path=/head/; revision=269364
* cxgbe(4): Update the bundled T4 and T5 firmwares to versions 1.11.27.0.Navdeep Parhar2014-06-222-2/+2
| | | | | | | | Obtained from: Chelsio MFC after: 3 days Notes: svn path=/head/; revision=267757
* cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards.Navdeep Parhar2014-05-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications. Notes: svn path=/head/; revision=266757
* Use src.opts.mk in preference to bsd.own.mk except where we need stuffWarner Losh2014-05-064-4/+4
| | | | | | | from the latter. Notes: svn path=/head/; revision=265420
* Don't build krping.ko, iw_cxgb.ko, and iw_cxgbe.ko, if MK_OFED=noEdward Tomasz Napierala2013-10-181-1/+4
| | | | | | | | | (the default). They build, but are unloadable, due to missing ibcore.ko. Sponsored by: FreeBSD Foundation Notes: svn path=/head/; revision=256725
* iw_cxgbe: iWARP driver for Chelsio T4/T5 chips. This is a straight portNavdeep Parhar2013-10-172-1/+35
| | | | | | | | | of the iw_cxgb4 found in OFED distributions. Obtained from: Chelsio Notes: svn path=/head/; revision=256694
* cxgbe(4): Update T4 and T5 firmwares to 1.9.12.0Navdeep Parhar2013-10-142-2/+2
| | | | Notes: svn path=/head/; revision=256459
* Add support for packet-sniffing tracers to cxgbe(4). This works withNavdeep Parhar2013-07-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | all T4 and T5 based cards and is useful for analyzing TSO, LRO, TOE, and for general purpose monitoring without tapping any cxgbe or cxl ifnet directly. Tracers on the T4/T5 chips provide access to Ethernet frames exactly as they were received from or transmitted on the wire. On transmit, a tracer will capture a frame after TSO segmentation, hw VLAN tag insertion, hw L3 & L4 checksum insertion, etc. It will also capture frames generated by the TCP offload engine (TOE traffic is normally invisible to the kernel). On receive, a tracer will capture a frame before hw VLAN extraction, runt filtering, other badness filtering, before the steering/drop/L2-rewrite filters or the TOE have had a go at it, and of course before sw LRO in the driver. There are 4 tracers on a chip. A tracer can trace only in one direction (tx or rx). For now cxgbetool will set up tracers to capture the first 128B of every transmitted or received frame on a given port. This is a small subset of what the hardware can do. A pseudo ifnet with the same name as the nexus driver (t4nex0 or t5nex0) will be created for tracing. The data delivered to this ifnet is an additional copy made inside the chip. Normal delivery to cxgbe<n> or cxl<n> will be made as usual. /* watch cxl0, which is the first port hanging off t5nex0. */ # cxgbetool t5nex0 tracer 0 tx0 (watch what cxl0 is transmitting) # cxgbetool t5nex0 tracer 1 rx0 (watch what cxl0 is receiving) # cxgbetool t5nex0 tracer list # tcpdump -i t5nex0 <== all that cxl0 sees and puts on the wire If you were doing TSO, a tcpdump on cxl0 may have shown you ~64K "frames" with no L3/L4 checksum but this will show you the frames that were actually transmitted. /* all done */ # cxgbetool t5nex0 tracer 0 disable # cxgbetool t5nex0 tracer 1 disable # cxgbetool t5nex0 tracer list # ifconfig t5nex0 destroy Notes: svn path=/head/; revision=253691
* - Include the T5 firmware with the driver.Navdeep Parhar2013-07-033-2/+29
| | | | | | | | | | | - Update the T4 firmware to the latest. - Minor reorganization and updates to the version macros, etc. Obtained from: Chelsio MFC after: 1 day Notes: svn path=/head/; revision=252661
* cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. ThisNavdeep Parhar2013-03-302-1/+2
| | | | | | | | | | | | | | includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio Notes: svn path=/head/; revision=248925
* cxgbe(4): Update firmware to 1.8.4.0.Navdeep Parhar2013-02-261-1/+1
| | | | | | | MFC after: 5 days Notes: svn path=/head/; revision=247289
* cxgbe(4): Updates to the hardware L2 table management code.Navdeep Parhar2013-01-141-3/+8
| | | | | | | | | | | | | | | - Add full support for IPv6 addresses. - Read the size of the L2 table during attach. Do not assume that PCIe physical function 4 of the card has all of the table to itself. - Use FNV instead of Jenkins to hash L3 addresses and drop the private copy of jhash.h from the driver. MFC after: 1 week Notes: svn path=/head/; revision=245434
* Update interface to firmware 1.6.2 and include the firmware in the driver.Navdeep Parhar2012-09-131-6/+6
| | | | | | | | Obtained from: Chelsio MFC after: 1 week Notes: svn path=/head/; revision=240443
* Support for TCP DDP (Direct Data Placement) in the T4 TOE module.Navdeep Parhar2012-08-171-1/+1
| | | | | | | | | | | | | | | Basically, this is automatic rx zero copy when feasible. TCP payload is DMA'd directly into the userspace buffer described by the uio submitted in soreceive by an application. - Works with sockets that are being handled by the TCP offload engine of a T4 chip (you need t4_tom.ko module loaded after cxgbe, and an "ifconfig +toe" on the cxgbe interface). - Does not require any modification to the application. - Not enabled by default. Use hw.t4nex.<X>.toe.ddp="1" to enable it. Notes: svn path=/head/; revision=239344
* Assume INET, INET6, and TCP_OFFLOAD when the driver is built out of tree andNavdeep Parhar2012-08-142-0/+25
| | | | | | | | | KERNBUILDDIR is not set. MFC after: 2 weeks Notes: svn path=/head/; revision=239264
* cxgbe(4): support for IPv6 TSO and LRO.Navdeep Parhar2012-06-291-1/+1
| | | | | | | Submitted by: bz (this is a modified version of that patch) Notes: svn path=/head/; revision=237819
* - Updated TOE support in the kernel.Navdeep Parhar2012-06-192-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible) Notes: svn path=/head/; revision=237263
* Many updates to cxgbe(4)Navdeep Parhar2011-12-162-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month Notes: svn path=/head/; revision=228561
* Fix make buildworld -DMODULES_WITH_WORLDUlrich Spörlein2011-06-231-0/+1
| | | | | | | Sort opt_ srcs Notes: svn path=/head/; revision=223483
* L2 table code. This is enough to get the T4's switch + L2 rewriteNavdeep Parhar2011-05-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | filters working. (All other filters - switch without L2 info rewrite, steer, and drop - were already fully-functional). Some contrived examples of "switch" filters with L2 rewriting: # cxgbetool t4nex0 iport 0 dport 80 action switch vlan +9 eport 3 Intercept all packets received on physical port 0 with TCP port 80 as destination, insert a vlan tag with VID 9, and send them out of port 3. # cxgbetool t4nex0 sip 192.168.1.1/32 ivlan 5 action switch \ vlan =9 smac aa:bb:cc:dd:ee:ff eport 0 Intercept all packets (received on any port) with source IP address 192.168.1.1 and VLAN id 5, rewrite the VLAN id to 9, rewrite source mac to aa:bb:cc:dd:ee:ff, and send it out of port 0. MFC after: 1 week Notes: svn path=/head/; revision=222509
* T4 packet timestamps.Navdeep Parhar2011-05-051-0/+3
| | | | | | | | | | | | | | | | | | Reference code that shows how to get a packet's timestamp out of cxgbe(4). Disabled by default because we don't have a standard way today to pass this information up the stack. The timestamp is 60 bits wide and each increment represents 1 tick of the T4's core clock. As an example, the timestamp granularity is ~4.4ns for this card: # sysctl dev.t4nex.0.core_clock dev.t4nex.0.core_clock: 228125 MFC after: 1 week Notes: svn path=/head/; revision=221477
* Allow multiple modules within sys/modules/cxgbe. The first one is if_cxgbe.Navdeep Parhar2011-04-012-11/+18
| | | | | | | MFC after: 3 days Notes: svn path=/head/; revision=220231
* cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters.Navdeep Parhar2011-02-181-0/+16
MFC after: 3 weeks Notes: svn path=/head/; revision=218792
generated by cgit v1.2.3 (git 2.25.1) at 2026-02-02 06:59:41 +0000