From 4a16efa3e43e35f0cc9efe3a67f620f0017c3d36 Mon Sep 17 00:00:00 2001 From: Dimitry Andric Date: Mon, 8 Apr 2013 18:41:23 +0000 Subject: Vendor import of llvm trunk r178860: http://llvm.org/svn/llvm-project/llvm/trunk@178860 --- lib/Target/ARM/A15SDOptimizer.cpp | 704 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 704 insertions(+) create mode 100644 lib/Target/ARM/A15SDOptimizer.cpp (limited to 'lib/Target/ARM/A15SDOptimizer.cpp') diff --git a/lib/Target/ARM/A15SDOptimizer.cpp b/lib/Target/ARM/A15SDOptimizer.cpp new file mode 100644 index 000000000000..f0d4dbe2bfb3 --- /dev/null +++ b/lib/Target/ARM/A15SDOptimizer.cpp @@ -0,0 +1,704 @@ +//=== A15SDOptimizerPass.cpp - Optimize DPR and SPR register accesses on A15==// +// +// The LLVM Compiler Infrastructure +// +// This file is distributed under the University of Illinois Open Source +// License. See LICENSE.TXT for details. +// +//===----------------------------------------------------------------------===// +// +// The Cortex-A15 processor employs a tracking scheme in its register renaming +// in order to process each instruction's micro-ops speculatively and +// out-of-order with appropriate forwarding. The ARM architecture allows VFP +// instructions to read and write 32-bit S-registers. Each S-register +// corresponds to one half (upper or lower) of an overlaid 64-bit D-register. +// +// There are several instruction patterns which can be used to provide this +// capability which can provide higher performance than other, potentially more +// direct patterns, specifically around when one micro-op reads a D-register +// operand that has recently been written as one or more S-register results. +// +// This file defines a pre-regalloc pass which looks for SPR producers which +// are going to be used by a DPR (or QPR) consumers and creates the more +// optimized access pattern. +// +//===----------------------------------------------------------------------===// + +#define DEBUG_TYPE "a15-sd-optimizer" +#include "ARM.h" +#include "ARMBaseInstrInfo.h" +#include "ARMSubtarget.h" +#include "ARMISelLowering.h" +#include "ARMTargetMachine.h" + +#include "llvm/ADT/SmallPtrSet.h" +#include "llvm/ADT/Statistic.h" +#include "llvm/CodeGen/MachineFunctionPass.h" +#include "llvm/CodeGen/MachineInstr.h" +#include "llvm/CodeGen/MachineInstrBuilder.h" +#include "llvm/CodeGen/MachineRegisterInfo.h" +#include "llvm/Support/CommandLine.h" +#include "llvm/Support/Debug.h" +#include "llvm/Support/raw_ostream.h" +#include "llvm/Target/TargetRegisterInfo.h" + +#include + +using namespace llvm; + +namespace { + struct A15SDOptimizer : public MachineFunctionPass { + static char ID; + A15SDOptimizer() : MachineFunctionPass(ID) {} + + virtual bool runOnMachineFunction(MachineFunction &Fn); + + virtual const char *getPassName() const { + return "ARM A15 S->D optimizer"; + } + + private: + const ARMBaseInstrInfo *TII; + const TargetRegisterInfo *TRI; + MachineRegisterInfo *MRI; + + bool runOnInstruction(MachineInstr *MI); + + // + // Instruction builder helpers + // + unsigned createDupLane(MachineBasicBlock &MBB, + MachineBasicBlock::iterator InsertBefore, + DebugLoc DL, + unsigned Reg, unsigned Lane, + bool QPR=false); + + unsigned createExtractSubreg(MachineBasicBlock &MBB, + MachineBasicBlock::iterator InsertBefore, + DebugLoc DL, + unsigned DReg, unsigned Lane, + const TargetRegisterClass *TRC); + + unsigned createVExt(MachineBasicBlock &MBB, + MachineBasicBlock::iterator InsertBefore, + DebugLoc DL, + unsigned Ssub0, unsigned Ssub1); + + unsigned createRegSequence(MachineBasicBlock &MBB, + MachineBasicBlock::iterator InsertBefore, + DebugLoc DL, + unsigned Reg1, unsigned Reg2); + + unsigned createInsertSubreg(MachineBasicBlock &MBB, + MachineBasicBlock::iterator InsertBefore, + DebugLoc DL, unsigned DReg, unsigned Lane, + unsigned ToInsert); + + unsigned createImplicitDef(MachineBasicBlock &MBB, + MachineBasicBlock::iterator InsertBefore, + DebugLoc DL); + + // + // Various property checkers + // + bool usesRegClass(MachineOperand &MO, const TargetRegisterClass *TRC); + bool hasPartialWrite(MachineInstr *MI); + SmallVector getReadDPRs(MachineInstr *MI); + unsigned getDPRLaneFromSPR(unsigned SReg); + + // + // Methods used for getting the definitions of partial registers + // + + MachineInstr *elideCopies(MachineInstr *MI); + void elideCopiesAndPHIs(MachineInstr *MI, + SmallVectorImpl &Outs); + + // + // Pattern optimization methods + // + unsigned optimizeAllLanesPattern(MachineInstr *MI, unsigned Reg); + unsigned optimizeSDPattern(MachineInstr *MI); + unsigned getPrefSPRLane(unsigned SReg); + + // + // Sanitizing method - used to make sure if don't leave dead code around. + // + void eraseInstrWithNoUses(MachineInstr *MI); + + // + // A map used to track the changes done by this pass. + // + std::map Replacements; + std::set DeadInstr; + }; + char A15SDOptimizer::ID = 0; +} // end anonymous namespace + +// Returns true if this is a use of a SPR register. +bool A15SDOptimizer::usesRegClass(MachineOperand &MO, + const TargetRegisterClass *TRC) { + if (!MO.isReg()) + return false; + unsigned Reg = MO.getReg(); + + if (TargetRegisterInfo::isVirtualRegister(Reg)) + return MRI->getRegClass(Reg)->hasSuperClassEq(TRC); + else + return TRC->contains(Reg); +} + +unsigned A15SDOptimizer::getDPRLaneFromSPR(unsigned SReg) { + unsigned DReg = TRI->getMatchingSuperReg(SReg, ARM::ssub_1, + &ARM::DPRRegClass); + if (DReg != ARM::NoRegister) return ARM::ssub_1; + return ARM::ssub_0; +} + +// Get the subreg type that is most likely to be coalesced +// for an SPR register that will be used in VDUP32d pseudo. +unsigned A15SDOptimizer::getPrefSPRLane(unsigned SReg) { + if (!TRI->isVirtualRegister(SReg)) + return getDPRLaneFromSPR(SReg); + + MachineInstr *MI = MRI->getVRegDef(SReg); + if (!MI) return ARM::ssub_0; + MachineOperand *MO = MI->findRegisterDefOperand(SReg); + + assert(MO->isReg() && "Non register operand found!"); + if (!MO) return ARM::ssub_0; + + if (MI->isCopy() && usesRegClass(MI->getOperand(1), + &ARM::SPRRegClass)) { + SReg = MI->getOperand(1).getReg(); + } + + if (TargetRegisterInfo::isVirtualRegister(SReg)) { + if (MO->getSubReg() == ARM::ssub_1) return ARM::ssub_1; + return ARM::ssub_0; + } + return getDPRLaneFromSPR(SReg); +} + +// MI is known to be dead. Figure out what instructions +// are also made dead by this and mark them for removal. +void A15SDOptimizer::eraseInstrWithNoUses(MachineInstr *MI) { + SmallVector Front; + DeadInstr.insert(MI); + + DEBUG(dbgs() << "Deleting base instruction " << *MI << "\n"); + Front.push_back(MI); + + while (Front.size() != 0) { + MI = Front.back(); + Front.pop_back(); + + // MI is already known to be dead. We need to see + // if other instructions can also be removed. + for (unsigned int i = 0; i < MI->getNumOperands(); ++i) { + MachineOperand &MO = MI->getOperand(i); + if ((!MO.isReg()) || (!MO.isUse())) + continue; + unsigned Reg = MO.getReg(); + if (!TRI->isVirtualRegister(Reg)) + continue; + MachineOperand *Op = MI->findRegisterDefOperand(Reg); + + if (!Op) + continue; + + MachineInstr *Def = Op->getParent(); + + // We don't need to do anything if we have already marked + // this instruction as being dead. + if (DeadInstr.find(Def) != DeadInstr.end()) + continue; + + // Check if all the uses of this instruction are marked as + // dead. If so, we can also mark this instruction as being + // dead. + bool IsDead = true; + for (unsigned int j = 0; j < Def->getNumOperands(); ++j) { + MachineOperand &MODef = Def->getOperand(j); + if ((!MODef.isReg()) || (!MODef.isDef())) + continue; + unsigned DefReg = MODef.getReg(); + if (!TRI->isVirtualRegister(DefReg)) { + IsDead = false; + break; + } + for (MachineRegisterInfo::use_iterator II = MRI->use_begin(Reg), + EE = MRI->use_end(); + II != EE; ++II) { + // We don't care about self references. + if (&*II == Def) + continue; + if (DeadInstr.find(&*II) == DeadInstr.end()) { + IsDead = false; + break; + } + } + } + + if (!IsDead) continue; + + DEBUG(dbgs() << "Deleting instruction " << *Def << "\n"); + DeadInstr.insert(Def); + } + } +} + +// Creates the more optimized patterns and generally does all the code +// transformations in this pass. +unsigned A15SDOptimizer::optimizeSDPattern(MachineInstr *MI) { + if (MI->isCopy()) { + return optimizeAllLanesPattern(MI, MI->getOperand(1).getReg()); + } + + if (MI->isInsertSubreg()) { + unsigned DPRReg = MI->getOperand(1).getReg(); + unsigned SPRReg = MI->getOperand(2).getReg(); + + if (TRI->isVirtualRegister(DPRReg) && TRI->isVirtualRegister(SPRReg)) { + MachineInstr *DPRMI = MRI->getVRegDef(MI->getOperand(1).getReg()); + MachineInstr *SPRMI = MRI->getVRegDef(MI->getOperand(2).getReg()); + + if (DPRMI && SPRMI) { + // See if the first operand of this insert_subreg is IMPLICIT_DEF + MachineInstr *ECDef = elideCopies(DPRMI); + if (ECDef != 0 && ECDef->isImplicitDef()) { + // Another corner case - if we're inserting something that is purely + // a subreg copy of a DPR, just use that DPR. + + MachineInstr *EC = elideCopies(SPRMI); + // Is it a subreg copy of ssub_0? + if (EC && EC->isCopy() && + EC->getOperand(1).getSubReg() == ARM::ssub_0) { + DEBUG(dbgs() << "Found a subreg copy: " << *SPRMI); + + // Find the thing we're subreg copying out of - is it of the same + // regclass as DPRMI? (i.e. a DPR or QPR). + unsigned FullReg = SPRMI->getOperand(1).getReg(); + const TargetRegisterClass *TRC = + MRI->getRegClass(MI->getOperand(1).getReg()); + if (TRC->hasSuperClassEq(MRI->getRegClass(FullReg))) { + DEBUG(dbgs() << "Subreg copy is compatible - returning "); + DEBUG(dbgs() << PrintReg(FullReg) << "\n"); + eraseInstrWithNoUses(MI); + return FullReg; + } + } + + return optimizeAllLanesPattern(MI, MI->getOperand(2).getReg()); + } + } + } + return optimizeAllLanesPattern(MI, MI->getOperand(0).getReg()); + } + + if (MI->isRegSequence() && usesRegClass(MI->getOperand(1), + &ARM::SPRRegClass)) { + // See if all bar one of the operands are IMPLICIT_DEF and insert the + // optimizer pattern accordingly. + unsigned NumImplicit = 0, NumTotal = 0; + unsigned NonImplicitReg = ~0U; + + for (unsigned I = 1; I < MI->getNumExplicitOperands(); ++I) { + if (!MI->getOperand(I).isReg()) + continue; + ++NumTotal; + unsigned OpReg = MI->getOperand(I).getReg(); + + if (!TRI->isVirtualRegister(OpReg)) + break; + + MachineInstr *Def = MRI->getVRegDef(OpReg); + if (!Def) + break; + if (Def->isImplicitDef()) + ++NumImplicit; + else + NonImplicitReg = MI->getOperand(I).getReg(); + } + + if (NumImplicit == NumTotal - 1) + return optimizeAllLanesPattern(MI, NonImplicitReg); + else + return optimizeAllLanesPattern(MI, MI->getOperand(0).getReg()); + } + + assert(0 && "Unhandled update pattern!"); + return 0; +} + +// Return true if this MachineInstr inserts a scalar (SPR) value into +// a D or Q register. +bool A15SDOptimizer::hasPartialWrite(MachineInstr *MI) { + // The only way we can do a partial register update is through a COPY, + // INSERT_SUBREG or REG_SEQUENCE. + if (MI->isCopy() && usesRegClass(MI->getOperand(1), &ARM::SPRRegClass)) + return true; + + if (MI->isInsertSubreg() && usesRegClass(MI->getOperand(2), + &ARM::SPRRegClass)) + return true; + + if (MI->isRegSequence() && usesRegClass(MI->getOperand(1), &ARM::SPRRegClass)) + return true; + + return false; +} + +// Looks through full copies to get the instruction that defines the input +// operand for MI. +MachineInstr *A15SDOptimizer::elideCopies(MachineInstr *MI) { + if (!MI->isFullCopy()) + return MI; + if (!TRI->isVirtualRegister(MI->getOperand(1).getReg())) + return NULL; + MachineInstr *Def = MRI->getVRegDef(MI->getOperand(1).getReg()); + if (!Def) + return NULL; + return elideCopies(Def); +} + +// Look through full copies and PHIs to get the set of non-copy MachineInstrs +// that can produce MI. +void A15SDOptimizer::elideCopiesAndPHIs(MachineInstr *MI, + SmallVectorImpl &Outs) { + // Looking through PHIs may create loops so we need to track what + // instructions we have visited before. + std::set Reached; + SmallVector Front; + Front.push_back(MI); + while (Front.size() != 0) { + MI = Front.back(); + Front.pop_back(); + + // If we have already explored this MachineInstr, ignore it. + if (Reached.find(MI) != Reached.end()) + continue; + Reached.insert(MI); + if (MI->isPHI()) { + for (unsigned I = 1, E = MI->getNumOperands(); I != E; I += 2) { + unsigned Reg = MI->getOperand(I).getReg(); + if (!TRI->isVirtualRegister(Reg)) { + continue; + } + MachineInstr *NewMI = MRI->getVRegDef(Reg); + if (!NewMI) + continue; + Front.push_back(NewMI); + } + } else if (MI->isFullCopy()) { + if (!TRI->isVirtualRegister(MI->getOperand(1).getReg())) + continue; + MachineInstr *NewMI = MRI->getVRegDef(MI->getOperand(1).getReg()); + if (!NewMI) + continue; + Front.push_back(NewMI); + } else { + DEBUG(dbgs() << "Found partial copy" << *MI <<"\n"); + Outs.push_back(MI); + } + } +} + +// Return the DPR virtual registers that are read by this machine instruction +// (if any). +SmallVector A15SDOptimizer::getReadDPRs(MachineInstr *MI) { + if (MI->isCopyLike() || MI->isInsertSubreg() || MI->isRegSequence() || + MI->isKill()) + return SmallVector(); + + SmallVector Defs; + for (unsigned i = 0; i < MI->getNumOperands(); ++i) { + MachineOperand &MO = MI->getOperand(i); + + if (!MO.isReg() || !MO.isUse()) + continue; + if (!usesRegClass(MO, &ARM::DPRRegClass) && + !usesRegClass(MO, &ARM::QPRRegClass)) + continue; + + Defs.push_back(MO.getReg()); + } + return Defs; +} + +// Creates a DPR register from an SPR one by using a VDUP. +unsigned +A15SDOptimizer::createDupLane(MachineBasicBlock &MBB, + MachineBasicBlock::iterator InsertBefore, + DebugLoc DL, + unsigned Reg, unsigned Lane, bool QPR) { + unsigned Out = MRI->createVirtualRegister(QPR ? &ARM::QPRRegClass : + &ARM::DPRRegClass); + AddDefaultPred(BuildMI(MBB, + InsertBefore, + DL, + TII->get(QPR ? ARM::VDUPLN32q : ARM::VDUPLN32d), + Out) + .addReg(Reg) + .addImm(Lane)); + + return Out; +} + +// Creates a SPR register from a DPR by copying the value in lane 0. +unsigned +A15SDOptimizer::createExtractSubreg(MachineBasicBlock &MBB, + MachineBasicBlock::iterator InsertBefore, + DebugLoc DL, + unsigned DReg, unsigned Lane, + const TargetRegisterClass *TRC) { + unsigned Out = MRI->createVirtualRegister(TRC); + BuildMI(MBB, + InsertBefore, + DL, + TII->get(TargetOpcode::COPY), Out) + .addReg(DReg, 0, Lane); + + return Out; +} + +// Takes two SPR registers and creates a DPR by using a REG_SEQUENCE. +unsigned +A15SDOptimizer::createRegSequence(MachineBasicBlock &MBB, + MachineBasicBlock::iterator InsertBefore, + DebugLoc DL, + unsigned Reg1, unsigned Reg2) { + unsigned Out = MRI->createVirtualRegister(&ARM::QPRRegClass); + BuildMI(MBB, + InsertBefore, + DL, + TII->get(TargetOpcode::REG_SEQUENCE), Out) + .addReg(Reg1) + .addImm(ARM::dsub_0) + .addReg(Reg2) + .addImm(ARM::dsub_1); + return Out; +} + +// Takes two DPR registers that have previously been VDUPed (Ssub0 and Ssub1) +// and merges them into one DPR register. +unsigned +A15SDOptimizer::createVExt(MachineBasicBlock &MBB, + MachineBasicBlock::iterator InsertBefore, + DebugLoc DL, + unsigned Ssub0, unsigned Ssub1) { + unsigned Out = MRI->createVirtualRegister(&ARM::DPRRegClass); + AddDefaultPred(BuildMI(MBB, + InsertBefore, + DL, + TII->get(ARM::VEXTd32), Out) + .addReg(Ssub0) + .addReg(Ssub1) + .addImm(1)); + return Out; +} + +unsigned +A15SDOptimizer::createInsertSubreg(MachineBasicBlock &MBB, + MachineBasicBlock::iterator InsertBefore, + DebugLoc DL, unsigned DReg, unsigned Lane, + unsigned ToInsert) { + unsigned Out = MRI->createVirtualRegister(&ARM::DPR_VFP2RegClass); + BuildMI(MBB, + InsertBefore, + DL, + TII->get(TargetOpcode::INSERT_SUBREG), Out) + .addReg(DReg) + .addReg(ToInsert) + .addImm(Lane); + + return Out; +} + +unsigned +A15SDOptimizer::createImplicitDef(MachineBasicBlock &MBB, + MachineBasicBlock::iterator InsertBefore, + DebugLoc DL) { + unsigned Out = MRI->createVirtualRegister(&ARM::DPRRegClass); + BuildMI(MBB, + InsertBefore, + DL, + TII->get(TargetOpcode::IMPLICIT_DEF), Out); + return Out; +} + +// This function inserts instructions in order to optimize interactions between +// SPR registers and DPR/QPR registers. It does so by performing VDUPs on all +// lanes, and the using VEXT instructions to recompose the result. +unsigned +A15SDOptimizer::optimizeAllLanesPattern(MachineInstr *MI, unsigned Reg) { + MachineBasicBlock::iterator InsertPt(MI); + DebugLoc DL = MI->getDebugLoc(); + MachineBasicBlock &MBB = *MI->getParent(); + InsertPt++; + unsigned Out; + + if (MRI->getRegClass(Reg)->hasSuperClassEq(&ARM::QPRRegClass)) { + unsigned DSub0 = createExtractSubreg(MBB, InsertPt, DL, Reg, + ARM::dsub_0, &ARM::DPRRegClass); + unsigned DSub1 = createExtractSubreg(MBB, InsertPt, DL, Reg, + ARM::dsub_1, &ARM::DPRRegClass); + + unsigned Out1 = createDupLane(MBB, InsertPt, DL, DSub0, 0); + unsigned Out2 = createDupLane(MBB, InsertPt, DL, DSub0, 1); + Out = createVExt(MBB, InsertPt, DL, Out1, Out2); + + unsigned Out3 = createDupLane(MBB, InsertPt, DL, DSub1, 0); + unsigned Out4 = createDupLane(MBB, InsertPt, DL, DSub1, 1); + Out2 = createVExt(MBB, InsertPt, DL, Out3, Out4); + + Out = createRegSequence(MBB, InsertPt, DL, Out, Out2); + + } else if (MRI->getRegClass(Reg)->hasSuperClassEq(&ARM::DPRRegClass)) { + unsigned Out1 = createDupLane(MBB, InsertPt, DL, Reg, 0); + unsigned Out2 = createDupLane(MBB, InsertPt, DL, Reg, 1); + Out = createVExt(MBB, InsertPt, DL, Out1, Out2); + + } else { + assert(MRI->getRegClass(Reg)->hasSuperClassEq(&ARM::SPRRegClass) && + "Found unexpected regclass!"); + + unsigned PrefLane = getPrefSPRLane(Reg); + unsigned Lane; + switch (PrefLane) { + case ARM::ssub_0: Lane = 0; break; + case ARM::ssub_1: Lane = 1; break; + default: llvm_unreachable("Unknown preferred lane!"); + } + + bool UsesQPR = usesRegClass(MI->getOperand(0), &ARM::QPRRegClass); + + Out = createImplicitDef(MBB, InsertPt, DL); + Out = createInsertSubreg(MBB, InsertPt, DL, Out, PrefLane, Reg); + Out = createDupLane(MBB, InsertPt, DL, Out, Lane, UsesQPR); + eraseInstrWithNoUses(MI); + } + return Out; +} + +bool A15SDOptimizer::runOnInstruction(MachineInstr *MI) { + // We look for instructions that write S registers that are then read as + // D/Q registers. These can only be caused by COPY, INSERT_SUBREG and + // REG_SEQUENCE pseudos that insert an SPR value into a DPR register or + // merge two SPR values to form a DPR register. In order avoid false + // positives we make sure that there is an SPR producer so we look past + // COPY and PHI nodes to find it. + // + // The best code pattern for when an SPR producer is going to be used by a + // DPR or QPR consumer depends on whether the other lanes of the + // corresponding DPR/QPR are currently defined. + // + // We can handle these efficiently, depending on the type of + // pseudo-instruction that is producing the pattern + // + // * COPY: * VDUP all lanes and merge the results together + // using VEXTs. + // + // * INSERT_SUBREG: * If the SPR value was originally in another DPR/QPR + // lane, and the other lane(s) of the DPR/QPR register + // that we are inserting in are undefined, use the + // original DPR/QPR value. + // * Otherwise, fall back on the same stategy as COPY. + // + // * REG_SEQUENCE: * If all except one of the input operands are + // IMPLICIT_DEFs, insert the VDUP pattern for just the + // defined input operand + // * Otherwise, fall back on the same stategy as COPY. + // + + // First, get all the reads of D-registers done by this instruction. + SmallVector Defs = getReadDPRs(MI); + bool Modified = false; + + for (SmallVector::iterator I = Defs.begin(), E = Defs.end(); + I != E; ++I) { + // Follow the def-use chain for this DPR through COPYs, and also through + // PHIs (which are essentially multi-way COPYs). It is because of PHIs that + // we can end up with multiple defs of this DPR. + + SmallVector DefSrcs; + if (!TRI->isVirtualRegister(*I)) + continue; + MachineInstr *Def = MRI->getVRegDef(*I); + if (!Def) + continue; + + elideCopiesAndPHIs(Def, DefSrcs); + + for (SmallVector::iterator II = DefSrcs.begin(), + EE = DefSrcs.end(); II != EE; ++II) { + MachineInstr *MI = *II; + + // If we've already analyzed and replaced this operand, don't do + // anything. + if (Replacements.find(MI) != Replacements.end()) + continue; + + // Now, work out if the instruction causes a SPR->DPR dependency. + if (!hasPartialWrite(MI)) + continue; + + // Collect all the uses of this MI's DPR def for updating later. + SmallVector Uses; + unsigned DPRDefReg = MI->getOperand(0).getReg(); + for (MachineRegisterInfo::use_iterator I = MRI->use_begin(DPRDefReg), + E = MRI->use_end(); I != E; ++I) + Uses.push_back(&I.getOperand()); + + // We can optimize this. + unsigned NewReg = optimizeSDPattern(MI); + + if (NewReg != 0) { + Modified = true; + for (SmallVector::const_iterator I = Uses.begin(), + E = Uses.end(); I != E; ++I) { + DEBUG(dbgs() << "Replacing operand " + << **I << " with " + << PrintReg(NewReg) << "\n"); + (*I)->substVirtReg(NewReg, 0, *TRI); + } + } + Replacements[MI] = NewReg; + } + } + return Modified; +} + +bool A15SDOptimizer::runOnMachineFunction(MachineFunction &Fn) { + TII = static_cast(Fn.getTarget().getInstrInfo()); + TRI = Fn.getTarget().getRegisterInfo(); + MRI = &Fn.getRegInfo(); + bool Modified = false; + + DEBUG(dbgs() << "Running on function " << Fn.getName()<< "\n"); + + DeadInstr.clear(); + Replacements.clear(); + + for (MachineFunction::iterator MFI = Fn.begin(), E = Fn.end(); MFI != E; + ++MFI) { + + for (MachineBasicBlock::iterator MI = MFI->begin(), ME = MFI->end(); + MI != ME;) { + Modified |= runOnInstruction(MI++); + } + + } + + for (std::set::iterator I = DeadInstr.begin(), + E = DeadInstr.end(); + I != E; ++I) { + (*I)->eraseFromParent(); + } + + return Modified; +} + +FunctionPass *llvm::createA15SDOptimizerPass() { + return new A15SDOptimizer(); +} -- cgit v1.2.3