From 8ba4488cea33438c69f6e5e4874f500f22f95f0e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?S=C3=B8ren=20Schmidt?= Date: Tue, 3 Dec 2002 20:20:44 +0000 Subject: Add support for the PC98 platform to the ATA driver. This mostly consists of functionality to serialize accesses to the two ATA channels (which can also be used to "fix" certain PCI based controllers). Add support for Acard controllers. Enable the ATA driver in PC98 GENERIC, and add device hints. Update man page with latest support. The PC98 core team has kindly provided me with a PC98 machine that made this all possible, thanks to all that contributed to that effort, without that this would probably newer have been possible.. Approved by: re@ --- sys/dev/ata/ata-cbus.c | 263 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 263 insertions(+) create mode 100644 sys/dev/ata/ata-cbus.c (limited to 'sys/dev/ata/ata-cbus.c') diff --git a/sys/dev/ata/ata-cbus.c b/sys/dev/ata/ata-cbus.c new file mode 100644 index 000000000000..f0bc10d916f4 --- /dev/null +++ b/sys/dev/ata/ata-cbus.c @@ -0,0 +1,263 @@ +/*- + * Copyright (c) 2002 Søren Schmidt + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer, + * without modification, immediately at the beginning of the file. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * $FreeBSD$ + */ + +#include "opt_ata.h" +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* local vars */ +static bus_addr_t ata_pc98_ports[] = { + 0x0, 0x2, 0x4, 0x6, 0x8, 0xa, 0xc, 0xe +}; + +struct ata_cbus_controller { + struct resource *io; + struct resource *altio; + struct resource *bankio; + struct resource *irq; + int current_bank; +}; + +static int +ata_cbus_probe(device_t dev) +{ + struct resource *io; + int rid; + u_long tmp; + + /* allocate the ioport range */ + rid = ATA_IOADDR_RID; + io = isa_alloc_resourcev(dev, SYS_RES_IOPORT, &rid, ata_pc98_ports, + ATA_IOSIZE, RF_ACTIVE); + if (!io) + return ENOMEM; + isa_load_resourcev(io, ata_pc98_ports, ATA_IOSIZE); + + /* calculate & set the altport range */ + rid = ATA_PC98_ALTADDR_RID; + if (bus_get_resource(dev, SYS_RES_IOPORT, rid, &tmp, &tmp)) { + bus_set_resource(dev, SYS_RES_IOPORT, rid, + rman_get_start(io)+ATA_PC98_ALTOFFSET, ATA_ALTIOSIZE); + } + + /* calculate & set the bank range */ + rid = ATA_PC98_BANKADDR_RID; + if (bus_get_resource(dev, SYS_RES_IOPORT, rid, &tmp, &tmp)) { + bus_set_resource(dev, SYS_RES_IOPORT, rid, + ATA_PC98_BANK, ATA_PC98_BANKIOSIZE); + } + + bus_release_resource(dev, SYS_RES_IOPORT, ATA_IOADDR_RID, io); + return 0; +} + +static int +ata_cbus_attach(device_t dev) +{ + struct ata_cbus_controller *scp = device_get_softc(dev); + int rid; + + /* allocate resources */ + rid = ATA_IOADDR_RID; + scp->io = isa_alloc_resourcev(dev, SYS_RES_IOPORT, &rid, ata_pc98_ports, + ATA_IOSIZE, RF_ACTIVE); + if (!scp->io) + return ENOMEM; + + isa_load_resourcev(scp->io, ata_pc98_ports, ATA_IOSIZE); + + rid = ATA_PC98_ALTADDR_RID; + scp->altio = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, + rman_get_start(scp->io)+ATA_PC98_ALTOFFSET, + ~0, ATA_ALTIOSIZE, RF_ACTIVE); + if (!scp->altio) + return ENOMEM; + + rid = ATA_PC98_BANKADDR_RID; + scp->bankio = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, + ATA_PC98_BANK, ~0, + ATA_PC98_BANKIOSIZE, RF_ACTIVE); + if (!scp->bankio) + return ENOMEM; + + rid = 0; + scp->irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, + 0, ~0, 1, RF_ACTIVE | RF_SHAREABLE); + + scp->current_bank = -1; + if (!device_add_child(dev, "ata", 0)) + return ENOMEM; + if (!device_add_child(dev, "ata", 1)) + return ENOMEM; + + return bus_generic_attach(dev); +} + +static struct resource * +ata_cbus_alloc_resource(device_t dev, device_t child, int type, int *rid, + u_long start, u_long end, u_long count, u_int flags) +{ + struct ata_cbus_controller *scp = device_get_softc(dev); + + if (type == SYS_RES_IOPORT) { + switch (*rid) { + case ATA_IOADDR_RID: + return scp->io; + case ATA_ALTADDR_RID: + return scp->altio; + } + } + if (type == SYS_RES_IRQ) { + return scp->irq; + } + return 0; +} + +static int +ata_cbus_setup_intr(device_t dev, device_t child, struct resource *irq, + int flags, driver_intr_t *intr, void *arg, + void **cookiep) +{ + return BUS_SETUP_INTR(device_get_parent(dev), dev, irq, + flags, intr, arg, cookiep); +} + +static int +ata_cbus_print_child(device_t dev, device_t child) +{ + struct ata_channel *ch = device_get_softc(child); + int retval = 0; + + retval += bus_print_child_header(dev, child); + retval += printf(" at bank %d", ch->unit); + retval += bus_print_child_footer(dev, child); + return retval; +} + +static int +ata_cbus_intr(struct ata_channel *ch) +{ + struct ata_cbus_controller *scp = + device_get_softc(device_get_parent(ch->dev)); + + return (ch->unit == scp->current_bank); +} + +static void +ata_cbus_banking(struct ata_channel *ch, int flags) +{ + struct ata_cbus_controller *scp = + device_get_softc(device_get_parent(ch->dev)); + + switch (flags) { + case ATA_LF_LOCK: + if (scp->current_bank == ch->unit) + break; + while (!atomic_cmpset_acq_int(&scp->current_bank, -1, ch->unit)) + tsleep((caddr_t)ch->lock_func, PRIBIO, "atalck", 1); + bus_space_write_1(rman_get_bustag(scp->bankio), + rman_get_bushandle(scp->bankio), 0, ch->unit); + break; + + case ATA_LF_UNLOCK: + if (scp->current_bank == -1 || scp->current_bank != ch->unit) + break; + atomic_store_rel_int(&scp->current_bank, -1); + break; + } + return; +} + +static device_method_t ata_cbus_methods[] = { + /* device_interface */ + DEVMETHOD(device_probe, ata_cbus_probe), + DEVMETHOD(device_attach, ata_cbus_attach), + + /* bus methods */ + DEVMETHOD(bus_alloc_resource, ata_cbus_alloc_resource), + DEVMETHOD(bus_setup_intr, ata_cbus_setup_intr), + DEVMETHOD(bus_print_child, ata_cbus_print_child), + { 0, 0 } +}; + +static driver_t ata_cbus_driver = { + "atacbus", + ata_cbus_methods, + sizeof(struct ata_cbus_controller), +}; + +static devclass_t ata_cbus_devclass; + +DRIVER_MODULE(atacbus, isa, ata_cbus_driver, ata_cbus_devclass, 0, 0); + +static int +ata_cbussub_probe(device_t dev) +{ + struct ata_channel *ch = device_get_softc(dev); + device_t *children; + int count, i; + + /* find channel number on this controller */ + device_get_children(device_get_parent(dev), &children, &count); + for (i = 0; i < count; i++) { + if (children[i] == dev) + ch->unit = i; + } + free(children, M_TEMP); + ch->flags |= ATA_USE_16BIT; + ch->intr_func = ata_cbus_intr; + ch->lock_func = ata_cbus_banking; + return ata_probe(dev); +} + +static device_method_t ata_cbussub_methods[] = { + /* device interface */ + DEVMETHOD(device_probe, ata_cbussub_probe), + DEVMETHOD(device_attach, ata_attach), + DEVMETHOD(device_detach, ata_detach), + DEVMETHOD(device_resume, ata_resume), + { 0, 0 } +}; + +static driver_t ata_cbussub_driver = { + "ata", + ata_cbussub_methods, + sizeof(struct ata_channel), +}; + +DRIVER_MODULE(ata, atacbus, ata_cbussub_driver, ata_devclass, 0, 0); -- cgit v1.2.3