@@@@@@@= @= @= @= @= @= @= @@@@@= @@@@@@= @@= @= @= F o r a l l h a c h e r s. version 2.0 @= @@@@@@=@= @= @= @@@@@= @= @= @= @= @= @= @= @= @= @= @@@@@= @= @= @= @= @= @= @= @=@= @= @= @@@@@@@@= @@@@= @@@@@= @@@@@@=@@@= @@@@= @@@@@@= Shigio Yamaguchi 7-Jul-97 Copyright 1996, 1997 Shigio Yamaguchi All right resereved. GLOBAL is a browsing system for C and Yacc source code. It brings benefits to all hackers. Enjoy! Contents -------------------------------- 0. Introduction 1. Global 1.1. Features 1.2. Preparation 1.3. Basic usage 1.4. Applied usage 2. Extended vi using global 2.1. Features 2.2. Preparation 2.3. Basic usage 2.4. Applied usage 3. Hypertext generator 3.1. Features 3.2. Preparation 3.3. Usage 3.4. To make hypertext of kernel 4. Extended emacs using global 4.1. Features 4.2. Preparation 4.3. Basic usage 4.4. Applied usage -------------------------------- 0. Introduction GLOBAL is a browsing system for C and Yacc source files. You can locate the specified function in C source files and move there easily. It is useful to hack a large project containing many subdirectories, many '#ifdef' and many main() functions like MH, X or BSD kernel. It supports following environments. o shell command line(see '1. Global') o vi editor(see '2. Extended vi using global') o web browser(see '3. Hypertext generator') o emacs editor(see '4. Emacs using global') GLOBAL is consist of global(1), gtags(1), btreeop(1), gctags(1), htags(1), extended vi(1) and gtags.el. * 'extended' means being entended for GLOBAL. * Btreeop and gctags are used internally, so you need not understand about them. The extended vi is completely upper compatible with original one. All the functions for GLOBAL are enabled only in 'gtagsmode'. ------------------------------------------------------------------------------ 1. Global 1.1. Features o Global can find the locations of a specified function quickly. o Global can locate not only function definitions but also function references. o Global allows duplicate entries. o Global can treat a source tree containing subdirectories and you can get relative path of objects from anywhere within the tree. o Global can understand perl's regular expression. o Global can search in not only a source tree but also library paths. o Global can treat yacc source file. I think these features are useful for a large project containing many subdirectories, many '#ifdef' and many main() functions like MH. 1.2. Preparation First of all, you must execute gtags(1) at the root of source tree. For example, if you want to browse vi's source code, please do like this. % cd /usr/src/usr.bin/vi % gtags Gtags traverse subdirectories and makes two database at the root of source tree. % ls G*TAGS GRTAGS GTAGS GTAGS - database for function definition GRTAGS - database for function reference If you cannot find functions that should exist, please try -e option. % gtags -e 1.3. Basic usage Please think of following source tree. ROOT/ <- the root of source tree (GTAGS,GRTAGS) | |- DIR1/ | | | |- fileA.c ..... +---------------+ | | |main(){ | | | | func1();| | | | func2();| | | |} | | | +---------------+ | | | |- fileB.c ..... +---------------+ | |func1(){ ... } | | +---------------+ |- DIR2/ | |- fileC.c ..... +---------------+ |#ifdef X | |func2(){ i++; }| |#else | |func2(){ i--; }| |#endif | |func3(){ | | func1();| |} | +---------------+ You can get the relative path of your object from anywhere within the source tree. % cd ROOT % global func1 DIR1/fileB.c <- func1() is defined in fileB.c % cd DIR1 % global func1 fileB.c <- relative path from DIR1 % cd ../DIR2 % global func1 ../DIR1/fileB.c <- relative path from DIR2 -r option locates function references. % global -r func2 ../DIR1/fileA.c <- func2() is referred from fileA.c You can use perl's regular expression. % cd ROOT % global 'func[1-3]' DIR1/fileB.c <- func1, func2 and func3 are matched DIR2/fileC.c -x option shows the detail. It's similar to ctags's -x option. % global func2 DIR2/fileC.c % global -x func2 func2 2 DIR2/fileC.c func2(){ i++; } func2 4 DIR2/fileC.c func2(){ i--; } -a option produces the absolute path name. % global -a func1 /home/user/ROOT/DIR1/fileB.c You can edit files including specified function directly like this. % vi `global func1` <- edit fileB.c 1.4. Applied usage You can make multiple tag files. For example, you can execute gtags at ROOT/, version1.0/ and version2.0/. ROOT/ <- the root of source tree (GTAGS,GRTAGS) | |- version1.0/ <- the root of version1.0 (GTAGS,GRTAGS) | | | |- file.c ..... +---------------+ | |func1(){ i++; }| | +---------------+ | |- version2.0/ <- the root of version2.0 (GTAGS,GRTAGS) | |- file.c ..... +---------------+ |func1(){ i--; }| +---------------+ When you are walking in version1.0 directory, global locates functions only in version1.0. % cd ROOT/version1.0 % global -x func1 func1 1 file.c func1(){ i++; } When you are walking in version2.0, global locates functions only in version2.0. % cd ROOT/version2.0 % global -x func1 func1 1 file.c func1(){ i--; } If you are at ROOT/ or you set GTAGSROOT environment variable to ROOT, global locates functions in both version1.0 and version2.0 directories. % cd ROOT % global -x func1 func1 1 version1.0/file.c func1(){ i++; } func1 1 version2.0/file.c func1(){ i--; } =-=-=-= There is another usage of GTAGSROOT. If your source files are on a read only device like CDROM, you cannot make database on the root of source tree. In such case, please do the following. % mkdir /var/dbpath % cd /cdrom/src <- the root of source tree % gtags /var/dbpath <- make tag file in /var/dbpath % setenv GTAGSROOT `pwd` % setenv GTAGSDBPATH /var/dbpath % global func =-=-=-= If you want to treat the references to a function that is not defined in the source tree like a library function or system call, you can specify library directories with the GTAGSLIBPATH environment variable. You should execute gtags at each directory of the path. If GTAGS is not found in a directory, global ignores it. % pwd /develop/src/mh <- this is the source tree % gtags % ls G*TAGS GRTAGS GTAGS % global mhl uip/mhlsbr.c <- mhl() is found % global strlen <- strlen() is not found % (cd /usr/src/lib; gtags) <- library source % (cd /usr/src/sys; gtags) <- kernel source % setenv GTAGSLIBPATH /usr/src/lib:/usr/src/sys % global strlen ../../../usr/src/lib/libc/string/strlen.c <- strlen() is found in library % global access ../../../usr/src/sys/kern/vfs_syscalls.c <- access() is found in kernel Of course, user program doesn't call kernel function directly, but at least it is useful. =-=-=-= If you forget function name, you can use -c (complete) option. % global -c kmem <- maybe k..k.. kmem.. kmem_alloc kmem_alloc_pageable kmem_alloc_wait kmem_free kmem_free_wakeup kmem_init kmem_malloc kmem_suballoc <- This is what I need! % global kmem_suballoc ../vm/vm_kern.c You can use -c option with tcsh's complete command. % set funcs=(`global -c`) % complete global 'n/*/$funcs/' % global kmem_ kmem_alloc kmem_alloc_wait kmem_free_wakeup kmem_malloc kmem_alloc_pageable kmem_free kmem_init kmem_suballoc % global kmem_s % global kmem_suballoc ../vm/vm_kern.c * means tab key or Ctrl-I. =-=-=-= If you want to browse many files in order, do the followings. % global -xr fork | awk '{printf "view +%s %s\n",$2,$3}' | tee /tmp/list view +650 ../dev/aic7xxx/aic7xxx_asm.c view +250 ibcs2/ibcs2_misc.c view +401 linux/linux_misc.c view +310 ../kern/init_main.c view +318 ../kern/init_main.c view +336 ../kern/init_main.c view +351 ../kern/init_main.c % sh !$ <- from now on, go to next tag with 'ZZ'. 2. Extended vi using global 2.1. Features o Tag function of extended vi can locate not only function definitions but also function references. o Extended vi allows duplicate tag entries. o Extended vi can understand perl's regular expression as a tag name for search. o Extended vi is completely upper compatible with original one. Above functions are available only in 'gtags mode'. 2.2. Preparation First, do the preparation of global. (Please see "1.2. Preparation"). Second, to use global from vi, you need to get into 'gtagsmode'. There are some ways to do it. (a) Start vi with -G option % vi -G file.c (b) Start vi and execute "set gtagsmode" % vi file.c ~ ~ ~ :set gtagsmode (c) Previously write the set command to .exrc or .nexrc file and start vi $HOME/.exrc +---------------------------- |set gtagsmode You must start vi under the source tree described in "1.2. Preparation". 2.3. Basic usage o To go to func1, you can say :tag func1 It seemes same with original vi, but extended vi use GTAGS instead of tags. o To go to referenced point of func1, add prefix 'r' :rtag func1 Extended vi use GRTAGS. o If a number of functions located, the action of extended vi differs up to your nvi's version. [Extended vi based 1.34 nvi] Vi goes into 'GTAGS SELECT MODE' like this. +------------------------------------------------------------- |main 347 i386/isa/ultra14f.c main() |main 128 kern/init_main.c main(framep) |main 104 netiso/clnp_debug.c main() |main 164 netiso/xebec/main.c main(argc, argv) |~ |~ |~ |~ |~ |[GTAGS SELECT MODE] 4 lines +------------------------------------------------------------- You can select a tag line by any vi command and press [RETURN], and you can go to the tag's point. In ex mode, type "select" instead of [RETURN]. When you want to go to next or previous tag, you can return to 'GTAGS SELECT MODE' with and reselect. Suggested .nexrc: set gtagsmode set leftright [Extended vi based 1.79 nvi] Vi goes to the first tag. Then you can go to next tag by ':tagnext' or back by ':tagprev'. Suggested .nexrc: set gtagsmode map ^N :tagnext^M map ^P :tagprev^M == WHY TWO STYLE EXIST ? == 1.34 nvi cannot treat duplicate tag entries, so I made 'GTAGS SELECT MODE' in it. But 1.79 nvi (1.61 and later) can treat them, so I adapted GLOBAL tags to nvi's tag structure. o command is available. In gtagsmode, if you are on the first column of line, it is identical to ":rtag [RETURN]", otherwise ":tag [RETURN]". o Other tag commands are available too. - Return to the most recent tag context. ":tagpop" - Pop to the specified tag in the tags stack. ":tagtop" - Pop to the top tag in the tags stack. ":display tags" - Display tags stack. Please read online manual. 2.4. Applied usage o In large project which include many main() function like MH, you can start vi like this. % vi -G -t main You can browse all commands sequentially. o When you want to check functions the name of which start with "set" or "get", % vi -G -t '^[sg]et' Of cause, following command is available too. :tag ^[sg]et o If your source files are on a read only device like CDROM, please do the followings. % mkdir /var/dbpath <- directory for tag file % cd /cdrom/src <- the root of source tree % gtags /var/dbpath <- make tag files in /var/dbpath % setenv GTAGSROOT `pwd` % setenv GTAGSDBPATH /var/dbpath % vi -G -t main o If you want to treat the references to the function that is not defined in the source tree like library functions or system calls, do the followings. % cd /usr/src/lib % gtags <- probably as a root % cd /usr/src/sys % gtags % setenv GTAGSLIBPATH /usr/src/lib:/usr/src/sys If you examine vi's source, % cd /usr/src/usr.bin/vi % gtags % vi -G -t main You can start from vi and trip the whole unix world as if using hypertext. 3. Hypertext generator 3.1. Features o Htags makes hypertext from C source files. o Once the hypertext generated, you need nothing other than WWW browser. o You can move hypertext to anywhere. It is independent of the source code. o You can use all of your browser's functions, for example, search, history, bookmark, save, frame, windows and so on. 3.2. Preparation At first, you must prepare much disk space. Hypertext needs so much disk space. For example, the source code of FreeBSD kernel needs the following disk space. source code(/usr/src/sys) 14MB tag database(GTAGS,GRTAGS) 9MB(!) hypertext(HTML/*) 45MB(!!!) Please do the followings. (at your source directory) % gtags <- make tag database % htags <- make hypertext Then you will find 'HTML' directory in the current directory. 3.3. Usage Please start a web browser like this. % lynx HTML/index.html You can use any browsers, for example, Lynx, Chimera, Mosaic, Netscape Navigator, Internet Explorer and so on. But some browsers cannot treat framed index. Then select '[no frame version is here]'. You will understand the usage for the looking. You can move HTML directory to anywhere. It is independent of the source code. 3.4. To make hypertext of kernel If you would like to make hypertext of FreeBSD kernel source, it is convenient to use systags script in this package. % cd /usr/src/sys % systags then % netscape HTML/index.html You can use following functions with systags. o input form for dynamic index. (This reqires you to setup httpd server for CGI program.) o one level nested index. o browse assembler source file. Of course, you can use above functions without systags. Please see gtags(1), htags(1). 4. Extended emacs using global 4.1. Features Addition to the extended vi, o More intelligent to recongnize current token and its type. o Tag completion is available for input tag name. o Mouse event is supported. 4.2. Preparation First, do the preparation of global. (Please see "1.2. Preparation"). Second, to use global from emacs, you need to load gtags.el file and execute gtags-mode function in it. There are some ways to do it. (a) Start emacs, load gtags.el and execute gtags-mode function. % emacs | |J_:-----Mule: *scratch* (Lisp Interaction)--L16--All---- |M-x load-library[RET] +------------------------------------------------------ | |J_:-----Mule: *scratch* (Lisp Interaction)--L16--All---- |Load library: gtags[RET] +------------------------------------------------------ | |J_:-----Mule: *scratch* (Lisp Interaction)--L16--All---- |M-x gtags-mode[RET] +------------------------------------------------------ (b) Previously write autoload function to $HOME/.emacs file, start emacs and execute gtags-mode function. $HOME/.emacs +------------------------------------------------------ |(autoload 'gtags-mode "gtags" "" t) % emacs | |J_:-----Mule: *scratch* (Lisp Interaction)--L16--All---- |M-x gtags-mode[RET] +------------------------------------------------------ (c) Previously write autoload function to $HOME/.emacs file and start emacs with -f option $HOME/.emacs +------------------------------------------------------ |(autoload 'gtags-mode "gtags" "" t) % emacs -f gtags-mode You must start emacs under the source tree described in "1.2. Preparation". 4.3. Basic usage It is resemble to the extended vi based nvi-1.34. o To go to func1, press 'ESC-t' and you can see a prompt in mini-buffer. Then input tag name. :tag func1 # ':tag ' is a prompt. ~~~~~ o To go to referenced point of func1, press 'ESC-r'. :rtag func1 # 'rtag ' is a prompt ~~~~~ o Tag name completion is available. :tag fu :tag func1 # 'nc1' is appended by emacs o If a number of functions located, emacs goes into 'GTAGS SELECT MODE' like this. +------------------------------------------------------------- |main 347 i386/isa/ultra14f.c main() |main 128 kern/init_main.c main(framep) |main 104 netiso/clnp_debug.c main() |main 164 netiso/xebec/main.c main(argc, argv) | | | | | |J_:--%*-Mule: *scratch* (Gtags Select)--L1--All---- |[GTAGS SELECT MODE] 4 lines +------------------------------------------------------------- You can select a tag line by any emacs command and press [RETURN], and you can go to the tag's point. When you want to go to next or previous tag, you can return to 'GTAGS SELECT MODE' with and reselect. o command is available. If current token is a definition, it is identical to ":rtag [RETURN]", otherwise ":tag [RETURN]". (GLOBAL decides this intelligentlly, but may sometimes misunderstand.) 4.4. Applied usage o You can use perl's regular expression. :tag ^put_ # locate tags start with 'put_'. o If your source files are on a read only device like CDROM, please do the followings. % mkdir /var/dbpath <- directory for tag file % cd /cdrom/src <- the root of source tree % gtags /var/dbpath <- make tag files in /var/dbpath % setenv GTAGSROOT `pwd` % setenv GTAGSDBPATH /var/dbpath % mule -f gtags-mode o If you want to treat the references to the function that is not defined in the source tree like library functions or system calls, do the followings. % cd /usr/src/lib % gtags <- probably as a root % cd /usr/src/sys % gtags % setenv GTAGSLIBPATH /usr/src/lib:/usr/src/sys % mule -f gtags-mode o mouse command is avalable. If you use X version emacs, try this. (But xemacs doesn't work well. I don't know why.) Move mouse cursor to a function name and click center button. And you will go to function's definition or references depending on the context. In 'GTAGS SELECT MODE', move mouse cursor to a line and click center button. To return to the previous position, click right button. Thank you for your reading of my poor english. And of course, I'm grateful to all excellent tools (vi, emacs, perl, C, db, mozilla ...) and its authors. ---------------------------------------------------------------------------- E-Mail: WWW: (You can find the latest version here.) ----------------------------------------------------------------------------