#
# Kernel configuration for Efika MX Smarttop/Smartbook boards
#
# For more information on this file, please read the config(5) manual page,
# and/or the handbook section on Kernel Configuration Files:
#
#    https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD$

ident		EFIKA_MX

include 	"std.armv7"
include 	"../freescale/imx/std.imx51"

makeoptions	WITHOUT_MODULES="ahc"

options 	SOC_IMX51

options 	SCHED_4BSD		# 4BSD scheduler
#options 	MD_ROOT			# MD is a potential root device
#options 	NFSD			# Network Filesystem Server
options 	PLATFORM
options 	INCLUDE_CONFIG_FILE	# Include this file in kernel

# NFS root from boopt/dhcp
#options 	BOOTP
#options 	BOOTP_NFSROOT
#options 	BOOTP_COMPAT
#options 	BOOTP_NFSV3
#options 	BOOTP_WIRED_TO=ue0

options 	ROOTDEVNAME=\"ufs:ada0s2a\"


# kernel/memory size reduction
#options 	MUTEX_NOINLINE
#options 	NO_FFS_SNAPSHOT
#options 	NO_SWAPPING
#options 	NO_SYSCTL_DESCR
#options 	RWLOCK_NOINLINE

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device		bpf			# Berkeley packet filter

# Pseudo devices.
device		loop			# Network loopback
device		ether			# Ethernet support
#device		vlan			# 802.1Q VLAN support
#device		tuntap			# Packet tunnel.
#device		md			# Memory "disks"
#device		gif			# IPv6 and IPv4 tunneling
#device		firmware		# firmware assist module

# Serial (COM) ports
device		uart			# Multi-uart driver

device		ata
device		atapci			# Only for helper functions
device		imxata

device		gpio
device		gpioled

device		fsliic
device		iic
device		iicbus

# SCSI peripherals
device		scbus			# SCSI bus (required for ATA/SCSI)
device		da			# Direct Access (disks)
device		cd			# CD
device		pass			# Passthrough device (direct ATA/SCSI access)

# USB support
options 	USB_HOST_ALIGN=64	# Align usb buffers to cache line size.
device		ehci			# OHCI USB interface
device		usb			# USB Bus (required)
device		umass			# Disks/Mass storage - Requires scbus and da
device		uhid			# "Human Interface Devices"
device		u3g

# USB Ethernet, requires miibus
device		miibus
device		aue			# ADMtek USB Ethernet
device		axe			# ASIX Electronics USB Ethernet
device		cdce			# Generic USB over Ethernet
device		cue			# CATC USB Ethernet
device		kue			# Kawasaki LSI USB Ethernet
device		rue			# RealTek RTL8150 USB Ethernet
device		udav			# Davicom DM9601E USB

# USB Wireless
device		rum			# Ralink Technology RT2501USB wireless NICs

# Watchdog timer.
# WARNING: can't be disabled!!!
device		imxwdt			# Watchdog

# Wireless NIC cards
device		wlan			# 802.11 support
device		wlan_wep		# 802.11 WEP support
device		wlan_ccmp		# 802.11 CCMP support
device		wlan_tkip		# 802.11 TKIP support
device		wlan_amrr		# AMRR transmit rate control algorithm

# HID support
device		hid			# Generic HID support

# Flattened Device Tree
options 	FDT			# Configure using FDT/DTB data
options 	FDT_DTB_STATIC
makeoptions	FDT_DTS_FILE=efikamx.dts
device  	fdt_pinctrl		# FDT pinmux driver

# NOTE: serial console will be disabled if syscons enabled
# Uncomment following lines for framebuffer/syscons support
device		sc
device		kbdmux
options 	SC_DFLT_FONT		# compile font in
makeoptions	SC_DFLT_FONT=cp437
device		ukbd			# Allow keyboard like HIDs to control console
device		ums