/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2016 by Delphix. All rights reserved. * Copyright (c) 2019 by Lawrence Livermore National Security, LLC. */ #include #include #include #include #include #include #include #include #include #include /* * TRIM is a feature which is used to notify a SSD that some previously * written space is no longer allocated by the pool. This is useful because * writes to a SSD must be performed to blocks which have first been erased. * Ensuring the SSD always has a supply of erased blocks for new writes * helps prevent the performance from deteriorating. * * There are two supported TRIM methods; manual and automatic. * * Manual TRIM: * * A manual TRIM is initiated by running the 'zpool trim' command. A single * 'vdev_trim' thread is created for each leaf vdev, and it is responsible for * managing that vdev TRIM process. This involves iterating over all the * metaslabs, calculating the unallocated space ranges, and then issuing the * required TRIM I/Os. * * While a metaslab is being actively trimmed it is not eligible to perform * new allocations. After traversing all of the metaslabs the thread is * terminated. Finally, both the requested options and current progress of * the TRIM are regularly written to the pool. This allows the TRIM to be * suspended and resumed as needed. * * Automatic TRIM: * * An automatic TRIM is enabled by setting the 'autotrim' pool property * to 'on'. When enabled, a `vdev_autotrim' thread is created for each * top-level (not leaf) vdev in the pool. These threads perform the same * core TRIM process as a manual TRIM, but with a few key differences. * * 1) Automatic TRIM happens continuously in the background and operates * solely on recently freed blocks (ms_trim not ms_allocatable). * * 2) Each thread is associated with a top-level (not leaf) vdev. This has * the benefit of simplifying the threading model, it makes it easier * to coordinate administrative commands, and it ensures only a single * metaslab is disabled at a time. Unlike manual TRIM, this means each * 'vdev_autotrim' thread is responsible for issuing TRIM I/Os for its * children. * * 3) There is no automatic TRIM progress information stored on disk, nor * is it reported by 'zpool status'. * * While the automatic TRIM process is highly effective it is more likely * than a manual TRIM to encounter tiny ranges. Ranges less than or equal to * 'zfs_trim_extent_bytes_min' (32k) are considered too small to efficiently * TRIM and are skipped. This means small amounts of freed space may not * be automatically trimmed. * * Furthermore, devices with attached hot spares and devices being actively * replaced are skipped. This is done to avoid adding additional stress to * a potentially unhealthy device and to minimize the required rebuild time. * * For this reason it may be beneficial to occasionally manually TRIM a pool * even when automatic TRIM is enabled. */ /* * Maximum size of TRIM I/O, ranges will be chunked in to 128MiB lengths. */ unsigned int zfs_trim_extent_bytes_max = 128 * 1024 * 1024; /* * Minimum size of TRIM I/O, extents smaller than 32Kib will be skipped. */ unsigned int zfs_trim_extent_bytes_min = 32 * 1024; /* * Skip uninitialized metaslabs during the TRIM process. This option is * useful for pools constructed from large thinly-provisioned devices where * TRIM operations are slow. As a pool ages an increasing fraction of * the pools metaslabs will be initialized progressively degrading the * usefulness of this option. This setting is stored when starting a * manual TRIM and will persist for the duration of the requested TRIM. */ unsigned int zfs_trim_metaslab_skip = 0; /* * Maximum number of queued TRIM I/Os per leaf vdev. The number of * concurrent TRIM I/Os issued to the device is controlled by the * zfs_vdev_trim_min_active and zfs_vdev_trim_max_active module options. */ unsigned int zfs_trim_queue_limit = 10; /* * The minimum number of transaction groups between automatic trims of a * metaslab. This setting represents a trade-off between issuing more * efficient TRIM operations, by allowing them to be aggregated longer, * and issuing them promptly so the trimmed space is available. Note * that this value is a minimum; metaslabs can be trimmed less frequently * when there are a large number of ranges which need to be trimmed. * * Increasing this value will allow frees to be aggregated for a longer * time. This can result is larger TRIM operations, and increased memory * usage in order to track the ranges to be trimmed. Decreasing this value * has the opposite effect. The default value of 32 was determined though * testing to be a reasonable compromise. */ unsigned int zfs_trim_txg_batch = 32; /* * The trim_args are a control structure which describe how a leaf vdev * should be trimmed. The core elements are the vdev, the metaslab being * trimmed and a range tree containing the extents to TRIM. All provided * ranges must be within the metaslab. */ typedef struct trim_args { /* * These fields are set by the caller of vdev_trim_ranges(). */ vdev_t *trim_vdev; /* Leaf vdev to TRIM */ metaslab_t *trim_msp; /* Disabled metaslab */ range_tree_t *trim_tree; /* TRIM ranges (in metaslab) */ trim_type_t trim_type; /* Manual or auto TRIM */ uint64_t trim_extent_bytes_max; /* Maximum TRIM I/O size */ uint64_t trim_extent_bytes_min; /* Minimum TRIM I/O size */ enum trim_flag trim_flags; /* TRIM flags (secure) */ /* * These fields are updated by vdev_trim_ranges(). */ hrtime_t trim_start_time; /* Start time */ uint64_t trim_bytes_done; /* Bytes trimmed */ } trim_args_t; /* * Determines whether a vdev_trim_thread() should be stopped. */ static boolean_t vdev_trim_should_stop(vdev_t *vd) { return (vd->vdev_trim_exit_wanted || !vdev_writeable(vd) || vd->vdev_detached || vd->vdev_top->vdev_removing); } /* * Determines whether a vdev_autotrim_thread() should be stopped. */ static boolean_t vdev_autotrim_should_stop(vdev_t *tvd) { return (tvd->vdev_autotrim_exit_wanted || !vdev_writeable(tvd) || tvd->vdev_removing || spa_get_autotrim(tvd->vdev_spa) == SPA_AUTOTRIM_OFF); } /* * The sync task for updating the on-disk state of a manual TRIM. This * is scheduled by vdev_trim_change_state(). */ static void vdev_trim_zap_update_sync(void *arg, dmu_tx_t *tx) { /* * We pass in the guid instead of the vdev_t since the vdev may * have been freed prior to the sync task being processed. This * happens when a vdev is detached as we call spa_config_vdev_exit(), * stop the trimming thread, schedule the sync task, and free * the vdev. Later when the scheduled sync task is invoked, it would * find that the vdev has been freed. */ uint64_t guid = *(uint64_t *)arg; uint64_t txg = dmu_tx_get_txg(tx); kmem_free(arg, sizeof (uint64_t)); vdev_t *vd = spa_lookup_by_guid(tx->tx_pool->dp_spa, guid, B_FALSE); if (vd == NULL || vd->vdev_top->vdev_removing || !vdev_is_concrete(vd)) return; uint64_t last_offset = vd->vdev_trim_offset[txg & TXG_MASK]; vd->vdev_trim_offset[txg & TXG_MASK] = 0; VERIFY3U(vd->vdev_leaf_zap, !=, 0); objset_t *mos = vd->vdev_spa->spa_meta_objset; if (last_offset > 0 || vd->vdev_trim_last_offset == UINT64_MAX) { if (vd->vdev_trim_last_offset == UINT64_MAX) last_offset = 0; vd->vdev_trim_last_offset = last_offset; VERIFY0(zap_update(mos, vd->vdev_leaf_zap, VDEV_LEAF_ZAP_TRIM_LAST_OFFSET, sizeof (last_offset), 1, &last_offset, tx)); } if (vd->vdev_trim_action_time > 0) { uint64_t val = (uint64_t)vd->vdev_trim_action_time; VERIFY0(zap_update(mos, vd->vdev_leaf_zap, VDEV_LEAF_ZAP_TRIM_ACTION_TIME, sizeof (val), 1, &val, tx)); } if (vd->vdev_trim_rate > 0) { uint64_t rate = (uint64_t)vd->vdev_trim_rate; if (rate == UINT64_MAX) rate = 0; VERIFY0(zap_update(mos, vd->vdev_leaf_zap, VDEV_LEAF_ZAP_TRIM_RATE, sizeof (rate), 1, &rate, tx)); } uint64_t partial = vd->vdev_trim_partial; if (partial == UINT64_MAX) partial = 0; VERIFY0(zap_update(mos, vd->vdev_leaf_zap, VDEV_LEAF_ZAP_TRIM_PARTIAL, sizeof (partial), 1, &partial, tx)); uint64_t secure = vd->vdev_trim_secure; if (secure == UINT64_MAX) secure = 0; VERIFY0(zap_update(mos, vd->vdev_leaf_zap, VDEV_LEAF_ZAP_TRIM_SECURE, sizeof (secure), 1, &secure, tx)); uint64_t trim_state = vd->vdev_trim_state; VERIFY0(zap_update(mos, vd->vdev_leaf_zap, VDEV_LEAF_ZAP_TRIM_STATE, sizeof (trim_state), 1, &trim_state, tx)); } /* * Update the on-disk state of a manual TRIM. This is called to request * that a TRIM be started/suspended/canceled, or to change one of the * TRIM options (partial, secure, rate). */ static void vdev_trim_change_state(vdev_t *vd, vdev_trim_state_t new_state, uint64_t rate, boolean_t partial, boolean_t secure) { ASSERT(MUTEX_HELD(&vd->vdev_trim_lock)); spa_t *spa = vd->vdev_spa; if (new_state == vd->vdev_trim_state) return; /* * Copy the vd's guid, this will be freed by the sync task. */ uint64_t *guid = kmem_zalloc(sizeof (uint64_t), KM_SLEEP); *guid = vd->vdev_guid; /* * If we're suspending, then preserve the original start time. */ if (vd->vdev_trim_state != VDEV_TRIM_SUSPENDED) { vd->vdev_trim_action_time = gethrestime_sec(); } /* * If we're activating, then preserve the requested rate and trim * method. Setting the last offset and rate to UINT64_MAX is used * as a sentinel to indicate they should be reset to default values. */ if (new_state == VDEV_TRIM_ACTIVE) { if (vd->vdev_trim_state == VDEV_TRIM_COMPLETE || vd->vdev_trim_state == VDEV_TRIM_CANCELED) { vd->vdev_trim_last_offset = UINT64_MAX; vd->vdev_trim_rate = UINT64_MAX; vd->vdev_trim_partial = UINT64_MAX; vd->vdev_trim_secure = UINT64_MAX; } if (rate != 0) vd->vdev_trim_rate = rate; if (partial != 0) vd->vdev_trim_partial = partial; if (secure != 0) vd->vdev_trim_secure = secure; } boolean_t resumed = !!(vd->vdev_trim_state == VDEV_TRIM_SUSPENDED); vd->vdev_trim_state = new_state; dmu_tx_t *tx = dmu_tx_create_dd(spa_get_dsl(spa)->dp_mos_dir); VERIFY0(dmu_tx_assign(tx, TXG_WAIT)); dsl_sync_task_nowait(spa_get_dsl(spa), vdev_trim_zap_update_sync, guid, tx); switch (new_state) { case VDEV_TRIM_ACTIVE: spa_event_notify(spa, vd, NULL, resumed ? ESC_ZFS_TRIM_RESUME : ESC_ZFS_TRIM_START); spa_history_log_internal(spa, "trim", tx, "vdev=%s activated", vd->vdev_path); break; case VDEV_TRIM_SUSPENDED: spa_event_notify(spa, vd, NULL, ESC_ZFS_TRIM_SUSPEND); spa_history_log_internal(spa, "trim", tx, "vdev=%s suspended", vd->vdev_path); break; case VDEV_TRIM_CANCELED: spa_event_notify(spa, vd, NULL, ESC_ZFS_TRIM_CANCEL); spa_history_log_internal(spa, "trim", tx, "vdev=%s canceled", vd->vdev_path); break; case VDEV_TRIM_COMPLETE: spa_event_notify(spa, vd, NULL, ESC_ZFS_TRIM_FINISH); spa_history_log_internal(spa, "trim", tx, "vdev=%s complete", vd->vdev_path); break; default: panic("invalid state %llu", (unsigned long long)new_state); } dmu_tx_commit(tx); if (new_state != VDEV_TRIM_ACTIVE) spa_notify_waiters(spa); } /* * The zio_done_func_t done callback for each manual TRIM issued. It is * responsible for updating the TRIM stats, reissuing failed TRIM I/Os, * and limiting the number of in flight TRIM I/Os. */ static void vdev_trim_cb(zio_t *zio) { vdev_t *vd = zio->io_vd; mutex_enter(&vd->vdev_trim_io_lock); if (zio->io_error == ENXIO && !vdev_writeable(vd)) { /* * The I/O failed because the vdev was unavailable; roll the * last offset back. (This works because spa_sync waits on * spa_txg_zio before it runs sync tasks.) */ uint64_t *offset = &vd->vdev_trim_offset[zio->io_txg & TXG_MASK]; *offset = MIN(*offset, zio->io_offset); } else { if (zio->io_error != 0) { vd->vdev_stat.vs_trim_errors++; spa_iostats_trim_add(vd->vdev_spa, TRIM_TYPE_MANUAL, 0, 0, 0, 0, 1, zio->io_orig_size); } else { spa_iostats_trim_add(vd->vdev_spa, TRIM_TYPE_MANUAL, 1, zio->io_orig_size, 0, 0, 0, 0); } vd->vdev_trim_bytes_done += zio->io_orig_size; } ASSERT3U(vd->vdev_trim_inflight[TRIM_TYPE_MANUAL], >, 0); vd->vdev_trim_inflight[TRIM_TYPE_MANUAL]--; cv_broadcast(&vd->vdev_trim_io_cv); mutex_exit(&vd->vdev_trim_io_lock); spa_config_exit(vd->vdev_spa, SCL_STATE_ALL, vd); } /* * The zio_done_func_t done callback for each automatic TRIM issued. It * is responsible for updating the TRIM stats and limiting the number of * in flight TRIM I/Os. Automatic TRIM I/Os are best effort and are * never reissued on failure. */ static void vdev_autotrim_cb(zio_t *zio) { vdev_t *vd = zio->io_vd; mutex_enter(&vd->vdev_trim_io_lock); if (zio->io_error != 0) { vd->vdev_stat.vs_trim_errors++; spa_iostats_trim_add(vd->vdev_spa, TRIM_TYPE_AUTO, 0, 0, 0, 0, 1, zio->io_orig_size); } else { spa_iostats_trim_add(vd->vdev_spa, TRIM_TYPE_AUTO, 1, zio->io_orig_size, 0, 0, 0, 0); } ASSERT3U(vd->vdev_trim_inflight[TRIM_TYPE_AUTO], >, 0); vd->vdev_trim_inflight[TRIM_TYPE_AUTO]--; cv_broadcast(&vd->vdev_trim_io_cv); mutex_exit(&vd->vdev_trim_io_lock); spa_config_exit(vd->vdev_spa, SCL_STATE_ALL, vd); } /* * The zio_done_func_t done callback for each TRIM issued via * vdev_trim_simple(). It is responsible for updating the TRIM stats and * limiting the number of in flight TRIM I/Os. Simple TRIM I/Os are best * effort and are never reissued on failure. */ static void vdev_trim_simple_cb(zio_t *zio) { vdev_t *vd = zio->io_vd; mutex_enter(&vd->vdev_trim_io_lock); if (zio->io_error != 0) { vd->vdev_stat.vs_trim_errors++; spa_iostats_trim_add(vd->vdev_spa, TRIM_TYPE_SIMPLE, 0, 0, 0, 0, 1, zio->io_orig_size); } else { spa_iostats_trim_add(vd->vdev_spa, TRIM_TYPE_SIMPLE, 1, zio->io_orig_size, 0, 0, 0, 0); } ASSERT3U(vd->vdev_trim_inflight[TRIM_TYPE_SIMPLE], >, 0); vd->vdev_trim_inflight[TRIM_TYPE_SIMPLE]--; cv_broadcast(&vd->vdev_trim_io_cv); mutex_exit(&vd->vdev_trim_io_lock); spa_config_exit(vd->vdev_spa, SCL_STATE_ALL, vd); } /* * Returns the average trim rate in bytes/sec for the ta->trim_vdev. */ static uint64_t vdev_trim_calculate_rate(trim_args_t *ta) { return (ta->trim_bytes_done * 1000 / (NSEC2MSEC(gethrtime() - ta->trim_start_time) + 1)); } /* * Issues a physical TRIM and takes care of rate limiting (bytes/sec) * and number of concurrent TRIM I/Os. */ static int vdev_trim_range(trim_args_t *ta, uint64_t start, uint64_t size) { vdev_t *vd = ta->trim_vdev; spa_t *spa = vd->vdev_spa; void *cb; mutex_enter(&vd->vdev_trim_io_lock); /* * Limit manual TRIM I/Os to the requested rate. This does not * apply to automatic TRIM since no per vdev rate can be specified. */ if (ta->trim_type == TRIM_TYPE_MANUAL) { while (vd->vdev_trim_rate != 0 && !vdev_trim_should_stop(vd) && vdev_trim_calculate_rate(ta) > vd->vdev_trim_rate) { cv_timedwait_idle(&vd->vdev_trim_io_cv, &vd->vdev_trim_io_lock, ddi_get_lbolt() + MSEC_TO_TICK(10)); } } ta->trim_bytes_done += size; /* Limit in flight trimming I/Os */ while (vd->vdev_trim_inflight[0] + vd->vdev_trim_inflight[1] + vd->vdev_trim_inflight[2] >= zfs_trim_queue_limit) { cv_wait(&vd->vdev_trim_io_cv, &vd->vdev_trim_io_lock); } vd->vdev_trim_inflight[ta->trim_type]++; mutex_exit(&vd->vdev_trim_io_lock); dmu_tx_t *tx = dmu_tx_create_dd(spa_get_dsl(spa)->dp_mos_dir); VERIFY0(dmu_tx_assign(tx, TXG_WAIT)); uint64_t txg = dmu_tx_get_txg(tx); spa_config_enter(spa, SCL_STATE_ALL, vd, RW_READER); mutex_enter(&vd->vdev_trim_lock); if (ta->trim_type == TRIM_TYPE_MANUAL && vd->vdev_trim_offset[txg & TXG_MASK] == 0) { uint64_t *guid = kmem_zalloc(sizeof (uint64_t), KM_SLEEP); *guid = vd->vdev_guid; /* This is the first write of this txg. */ dsl_sync_task_nowait(spa_get_dsl(spa), vdev_trim_zap_update_sync, guid, tx); } /* * We know the vdev_t will still be around since all consumers of * vdev_free must stop the trimming first. */ if ((ta->trim_type == TRIM_TYPE_MANUAL && vdev_trim_should_stop(vd)) || (ta->trim_type == TRIM_TYPE_AUTO && vdev_autotrim_should_stop(vd->vdev_top))) { mutex_enter(&vd->vdev_trim_io_lock); vd->vdev_trim_inflight[ta->trim_type]--; mutex_exit(&vd->vdev_trim_io_lock); spa_config_exit(vd->vdev_spa, SCL_STATE_ALL, vd); mutex_exit(&vd->vdev_trim_lock); dmu_tx_commit(tx); return (SET_ERROR(EINTR)); } mutex_exit(&vd->vdev_trim_lock); if (ta->trim_type == TRIM_TYPE_MANUAL) vd->vdev_trim_offset[txg & TXG_MASK] = start + size; if (ta->trim_type == TRIM_TYPE_MANUAL) { cb = vdev_trim_cb; } else if (ta->trim_type == TRIM_TYPE_AUTO) { cb = vdev_autotrim_cb; } else { cb = vdev_trim_simple_cb; } zio_nowait(zio_trim(spa->spa_txg_zio[txg & TXG_MASK], vd, start, size, cb, NULL, ZIO_PRIORITY_TRIM, ZIO_FLAG_CANFAIL, ta->trim_flags)); /* vdev_trim_cb and vdev_autotrim_cb release SCL_STATE_ALL */ dmu_tx_commit(tx); return (0); } /* * Issues TRIM I/Os for all ranges in the provided ta->trim_tree range tree. * Additional parameters describing how the TRIM should be performed must * be set in the trim_args structure. See the trim_args definition for * additional information. */ static int vdev_trim_ranges(trim_args_t *ta) { vdev_t *vd = ta->trim_vdev; zfs_btree_t *t = &ta->trim_tree->rt_root; zfs_btree_index_t idx; uint64_t extent_bytes_max = ta->trim_extent_bytes_max; uint64_t extent_bytes_min = ta->trim_extent_bytes_min; spa_t *spa = vd->vdev_spa; ta->trim_start_time = gethrtime(); ta->trim_bytes_done = 0; for (range_seg_t *rs = zfs_btree_first(t, &idx); rs != NULL; rs = zfs_btree_next(t, &idx, &idx)) { uint64_t size = rs_get_end(rs, ta->trim_tree) - rs_get_start(rs, ta->trim_tree); if (extent_bytes_min && size < extent_bytes_min) { spa_iostats_trim_add(spa, ta->trim_type, 0, 0, 1, size, 0, 0); continue; } /* Split range into legally-sized physical chunks */ uint64_t writes_required = ((size - 1) / extent_bytes_max) + 1; for (uint64_t w = 0; w < writes_required; w++) { int error; error = vdev_trim_range(ta, VDEV_LABEL_START_SIZE + rs_get_start(rs, ta->trim_tree) + (w *extent_bytes_max), MIN(size - (w * extent_bytes_max), extent_bytes_max)); if (error != 0) { return (error); } } } return (0); } /* * Calculates the completion percentage of a manual TRIM. */ static void vdev_trim_calculate_progress(vdev_t *vd) { ASSERT(spa_config_held(vd->vdev_spa, SCL_CONFIG, RW_READER) || spa_config_held(vd->vdev_spa, SCL_CONFIG, RW_WRITER)); ASSERT(vd->vdev_leaf_zap != 0); vd->vdev_trim_bytes_est = 0; vd->vdev_trim_bytes_done = 0; for (uint64_t i = 0; i < vd->vdev_top->vdev_ms_count; i++) { metaslab_t *msp = vd->vdev_top->vdev_ms[i]; mutex_enter(&msp->ms_lock); uint64_t ms_free = msp->ms_size - metaslab_allocated_space(msp); if (vd->vdev_top->vdev_ops == &vdev_raidz_ops) ms_free /= vd->vdev_top->vdev_children; /* * Convert the metaslab range to a physical range * on our vdev. We use this to determine if we are * in the middle of this metaslab range. */ range_seg64_t logical_rs, physical_rs; logical_rs.rs_start = msp->ms_start; logical_rs.rs_end = msp->ms_start + msp->ms_size; vdev_xlate(vd, &logical_rs, &physical_rs); if (vd->vdev_trim_last_offset <= physical_rs.rs_start) { vd->vdev_trim_bytes_est += ms_free; mutex_exit(&msp->ms_lock); continue; } else if (vd->vdev_trim_last_offset > physical_rs.rs_end) { vd->vdev_trim_bytes_done += ms_free; vd->vdev_trim_bytes_est += ms_free; mutex_exit(&msp->ms_lock); continue; } /* * If we get here, we're in the middle of trimming this * metaslab. Load it and walk the free tree for more * accurate progress estimation. */ VERIFY0(metaslab_load(msp)); range_tree_t *rt = msp->ms_allocatable; zfs_btree_t *bt = &rt->rt_root; zfs_btree_index_t idx; for (range_seg_t *rs = zfs_btree_first(bt, &idx); rs != NULL; rs = zfs_btree_next(bt, &idx, &idx)) { logical_rs.rs_start = rs_get_start(rs, rt); logical_rs.rs_end = rs_get_end(rs, rt); vdev_xlate(vd, &logical_rs, &physical_rs); uint64_t size = physical_rs.rs_end - physical_rs.rs_start; vd->vdev_trim_bytes_est += size; if (vd->vdev_trim_last_offset >= physical_rs.rs_end) { vd->vdev_trim_bytes_done += size; } else if (vd->vdev_trim_last_offset > physical_rs.rs_start && vd->vdev_trim_last_offset <= physical_rs.rs_end) { vd->vdev_trim_bytes_done += vd->vdev_trim_last_offset - physical_rs.rs_start; } } mutex_exit(&msp->ms_lock); } } /* * Load from disk the vdev's manual TRIM information. This includes the * state, progress, and options provided when initiating the manual TRIM. */ static int vdev_trim_load(vdev_t *vd) { int err = 0; ASSERT(spa_config_held(vd->vdev_spa, SCL_CONFIG, RW_READER) || spa_config_held(vd->vdev_spa, SCL_CONFIG, RW_WRITER)); ASSERT(vd->vdev_leaf_zap != 0); if (vd->vdev_trim_state == VDEV_TRIM_ACTIVE || vd->vdev_trim_state == VDEV_TRIM_SUSPENDED) { err = zap_lookup(vd->vdev_spa->spa_meta_objset, vd->vdev_leaf_zap, VDEV_LEAF_ZAP_TRIM_LAST_OFFSET, sizeof (vd->vdev_trim_last_offset), 1, &vd->vdev_trim_last_offset); if (err == ENOENT) { vd->vdev_trim_last_offset = 0; err = 0; } if (err == 0) { err = zap_lookup(vd->vdev_spa->spa_meta_objset, vd->vdev_leaf_zap, VDEV_LEAF_ZAP_TRIM_RATE, sizeof (vd->vdev_trim_rate), 1, &vd->vdev_trim_rate); if (err == ENOENT) { vd->vdev_trim_rate = 0; err = 0; } } if (err == 0) { err = zap_lookup(vd->vdev_spa->spa_meta_objset, vd->vdev_leaf_zap, VDEV_LEAF_ZAP_TRIM_PARTIAL, sizeof (vd->vdev_trim_partial), 1, &vd->vdev_trim_partial); if (err == ENOENT) { vd->vdev_trim_partial = 0; err = 0; } } if (err == 0) { err = zap_lookup(vd->vdev_spa->spa_meta_objset, vd->vdev_leaf_zap, VDEV_LEAF_ZAP_TRIM_SECURE, sizeof (vd->vdev_trim_secure), 1, &vd->vdev_trim_secure); if (err == ENOENT) { vd->vdev_trim_secure = 0; err = 0; } } } vdev_trim_calculate_progress(vd); return (err); } /* * Convert the logical range into a physical range and add it to the * range tree passed in the trim_args_t. */ static void vdev_trim_range_add(void *arg, uint64_t start, uint64_t size) { trim_args_t *ta = arg; vdev_t *vd = ta->trim_vdev; range_seg64_t logical_rs, physical_rs; logical_rs.rs_start = start; logical_rs.rs_end = start + size; /* * Every range to be trimmed must be part of ms_allocatable. * When ZFS_DEBUG_TRIM is set load the metaslab to verify this * is always the case. */ if (zfs_flags & ZFS_DEBUG_TRIM) { metaslab_t *msp = ta->trim_msp; VERIFY0(metaslab_load(msp)); VERIFY3B(msp->ms_loaded, ==, B_TRUE); VERIFY(range_tree_contains(msp->ms_allocatable, start, size)); } ASSERT(vd->vdev_ops->vdev_op_leaf); vdev_xlate(vd, &logical_rs, &physical_rs); IMPLY(vd->vdev_top == vd, logical_rs.rs_start == physical_rs.rs_start); IMPLY(vd->vdev_top == vd, logical_rs.rs_end == physical_rs.rs_end); /* * Only a manual trim will be traversing the vdev sequentially. * For an auto trim all valid ranges should be added. */ if (ta->trim_type == TRIM_TYPE_MANUAL) { /* Only add segments that we have not visited yet */ if (physical_rs.rs_end <= vd->vdev_trim_last_offset) return; /* Pick up where we left off mid-range. */ if (vd->vdev_trim_last_offset > physical_rs.rs_start) { ASSERT3U(physical_rs.rs_end, >, vd->vdev_trim_last_offset); physical_rs.rs_start = vd->vdev_trim_last_offset; } } ASSERT3U(physical_rs.rs_end, >=, physical_rs.rs_start); /* * With raidz, it's possible that the logical range does not live on * this leaf vdev. We only add the physical range to this vdev's if it * has a length greater than 0. */ if (physical_rs.rs_end > physical_rs.rs_start) { range_tree_add(ta->trim_tree, physical_rs.rs_start, physical_rs.rs_end - physical_rs.rs_start); } else { ASSERT3U(physical_rs.rs_end, ==, physical_rs.rs_start); } } /* * Each manual TRIM thread is responsible for trimming the unallocated * space for each leaf vdev. This is accomplished by sequentially iterating * over its top-level metaslabs and issuing TRIM I/O for the space described * by its ms_allocatable. While a metaslab is undergoing trimming it is * not eligible for new allocations. */ static void vdev_trim_thread(void *arg) { vdev_t *vd = arg; spa_t *spa = vd->vdev_spa; trim_args_t ta; int error = 0; /* * The VDEV_LEAF_ZAP_TRIM_* entries may have been updated by * vdev_trim(). Wait for the updated values to be reflected * in the zap in order to start with the requested settings. */ txg_wait_synced(spa_get_dsl(vd->vdev_spa), 0); ASSERT(vdev_is_concrete(vd)); spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); vd->vdev_trim_last_offset = 0; vd->vdev_trim_rate = 0; vd->vdev_trim_partial = 0; vd->vdev_trim_secure = 0; VERIFY0(vdev_trim_load(vd)); ta.trim_vdev = vd; ta.trim_extent_bytes_max = zfs_trim_extent_bytes_max; ta.trim_extent_bytes_min = zfs_trim_extent_bytes_min; ta.trim_tree = range_tree_create(NULL, RANGE_SEG64, NULL, 0, 0); ta.trim_type = TRIM_TYPE_MANUAL; ta.trim_flags = 0; /* * When a secure TRIM has been requested infer that the intent * is that everything must be trimmed. Override the default * minimum TRIM size to prevent ranges from being skipped. */ if (vd->vdev_trim_secure) { ta.trim_flags |= ZIO_TRIM_SECURE; ta.trim_extent_bytes_min = SPA_MINBLOCKSIZE; } uint64_t ms_count = 0; for (uint64_t i = 0; !vd->vdev_detached && i < vd->vdev_top->vdev_ms_count; i++) { metaslab_t *msp = vd->vdev_top->vdev_ms[i]; /* * If we've expanded the top-level vdev or it's our * first pass, calculate our progress. */ if (vd->vdev_top->vdev_ms_count != ms_count) { vdev_trim_calculate_progress(vd); ms_count = vd->vdev_top->vdev_ms_count; } spa_config_exit(spa, SCL_CONFIG, FTAG); metaslab_disable(msp); mutex_enter(&msp->ms_lock); VERIFY0(metaslab_load(msp)); /* * If a partial TRIM was requested skip metaslabs which have * never been initialized and thus have never been written. */ if (msp->ms_sm == NULL && vd->vdev_trim_partial) { mutex_exit(&msp->ms_lock); metaslab_enable(msp, B_FALSE, B_FALSE); spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); vdev_trim_calculate_progress(vd); continue; } ta.trim_msp = msp; range_tree_walk(msp->ms_allocatable, vdev_trim_range_add, &ta); range_tree_vacate(msp->ms_trim, NULL, NULL); mutex_exit(&msp->ms_lock); error = vdev_trim_ranges(&ta); metaslab_enable(msp, B_TRUE, B_FALSE); spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); range_tree_vacate(ta.trim_tree, NULL, NULL); if (error != 0) break; } spa_config_exit(spa, SCL_CONFIG, FTAG); mutex_enter(&vd->vdev_trim_io_lock); while (vd->vdev_trim_inflight[0] > 0) { cv_wait(&vd->vdev_trim_io_cv, &vd->vdev_trim_io_lock); } mutex_exit(&vd->vdev_trim_io_lock); range_tree_destroy(ta.trim_tree); mutex_enter(&vd->vdev_trim_lock); if (!vd->vdev_trim_exit_wanted && vdev_writeable(vd)) { vdev_trim_change_state(vd, VDEV_TRIM_COMPLETE, vd->vdev_trim_rate, vd->vdev_trim_partial, vd->vdev_trim_secure); } ASSERT(vd->vdev_trim_thread != NULL || vd->vdev_trim_inflight[0] == 0); /* * Drop the vdev_trim_lock while we sync out the txg since it's * possible that a device might be trying to come online and must * check to see if it needs to restart a trim. That thread will be * holding the spa_config_lock which would prevent the txg_wait_synced * from completing. */ mutex_exit(&vd->vdev_trim_lock); txg_wait_synced(spa_get_dsl(spa), 0); mutex_enter(&vd->vdev_trim_lock); vd->vdev_trim_thread = NULL; cv_broadcast(&vd->vdev_trim_cv); mutex_exit(&vd->vdev_trim_lock); thread_exit(); } /* * Initiates a manual TRIM for the vdev_t. Callers must hold vdev_trim_lock, * the vdev_t must be a leaf and cannot already be manually trimming. */ void vdev_trim(vdev_t *vd, uint64_t rate, boolean_t partial, boolean_t secure) { ASSERT(MUTEX_HELD(&vd->vdev_trim_lock)); ASSERT(vd->vdev_ops->vdev_op_leaf); ASSERT(vdev_is_concrete(vd)); ASSERT3P(vd->vdev_trim_thread, ==, NULL); ASSERT(!vd->vdev_detached); ASSERT(!vd->vdev_trim_exit_wanted); ASSERT(!vd->vdev_top->vdev_removing); vdev_trim_change_state(vd, VDEV_TRIM_ACTIVE, rate, partial, secure); vd->vdev_trim_thread = thread_create(NULL, 0, vdev_trim_thread, vd, 0, &p0, TS_RUN, maxclsyspri); } /* * Wait for the trimming thread to be terminated (canceled or stopped). */ static void vdev_trim_stop_wait_impl(vdev_t *vd) { ASSERT(MUTEX_HELD(&vd->vdev_trim_lock)); while (vd->vdev_trim_thread != NULL) cv_wait(&vd->vdev_trim_cv, &vd->vdev_trim_lock); ASSERT3P(vd->vdev_trim_thread, ==, NULL); vd->vdev_trim_exit_wanted = B_FALSE; } /* * Wait for vdev trim threads which were listed to cleanly exit. */ void vdev_trim_stop_wait(spa_t *spa, list_t *vd_list) { vdev_t *vd; ASSERT(MUTEX_HELD(&spa_namespace_lock)); while ((vd = list_remove_head(vd_list)) != NULL) { mutex_enter(&vd->vdev_trim_lock); vdev_trim_stop_wait_impl(vd); mutex_exit(&vd->vdev_trim_lock); } } /* * Stop trimming a device, with the resultant trimming state being tgt_state. * For blocking behavior pass NULL for vd_list. Otherwise, when a list_t is * provided the stopping vdev is inserted in to the list. Callers are then * required to call vdev_trim_stop_wait() to block for all the trim threads * to exit. The caller must hold vdev_trim_lock and must not be writing to * the spa config, as the trimming thread may try to enter the config as a * reader before exiting. */ void vdev_trim_stop(vdev_t *vd, vdev_trim_state_t tgt_state, list_t *vd_list) { ASSERT(!spa_config_held(vd->vdev_spa, SCL_CONFIG|SCL_STATE, RW_WRITER)); ASSERT(MUTEX_HELD(&vd->vdev_trim_lock)); ASSERT(vd->vdev_ops->vdev_op_leaf); ASSERT(vdev_is_concrete(vd)); /* * Allow cancel requests to proceed even if the trim thread has * stopped. */ if (vd->vdev_trim_thread == NULL && tgt_state != VDEV_TRIM_CANCELED) return; vdev_trim_change_state(vd, tgt_state, 0, 0, 0); vd->vdev_trim_exit_wanted = B_TRUE; if (vd_list == NULL) { vdev_trim_stop_wait_impl(vd); } else { ASSERT(MUTEX_HELD(&spa_namespace_lock)); list_insert_tail(vd_list, vd); } } /* * Requests that all listed vdevs stop trimming. */ static void vdev_trim_stop_all_impl(vdev_t *vd, vdev_trim_state_t tgt_state, list_t *vd_list) { if (vd->vdev_ops->vdev_op_leaf && vdev_is_concrete(vd)) { mutex_enter(&vd->vdev_trim_lock); vdev_trim_stop(vd, tgt_state, vd_list); mutex_exit(&vd->vdev_trim_lock); return; } for (uint64_t i = 0; i < vd->vdev_children; i++) { vdev_trim_stop_all_impl(vd->vdev_child[i], tgt_state, vd_list); } } /* * Convenience function to stop trimming of a vdev tree and set all trim * thread pointers to NULL. */ void vdev_trim_stop_all(vdev_t *vd, vdev_trim_state_t tgt_state) { spa_t *spa = vd->vdev_spa; list_t vd_list; vdev_t *vd_l2cache; ASSERT(MUTEX_HELD(&spa_namespace_lock)); list_create(&vd_list, sizeof (vdev_t), offsetof(vdev_t, vdev_trim_node)); vdev_trim_stop_all_impl(vd, tgt_state, &vd_list); /* * Iterate over cache devices and request stop trimming the * whole device in case we export the pool or remove the cache * device prematurely. */ for (int i = 0; i < spa->spa_l2cache.sav_count; i++) { vd_l2cache = spa->spa_l2cache.sav_vdevs[i]; vdev_trim_stop_all_impl(vd_l2cache, tgt_state, &vd_list); } vdev_trim_stop_wait(spa, &vd_list); if (vd->vdev_spa->spa_sync_on) { /* Make sure that our state has been synced to disk */ txg_wait_synced(spa_get_dsl(vd->vdev_spa), 0); } list_destroy(&vd_list); } /* * Conditionally restarts a manual TRIM given its on-disk state. */ void vdev_trim_restart(vdev_t *vd) { ASSERT(MUTEX_HELD(&spa_namespace_lock)); ASSERT(!spa_config_held(vd->vdev_spa, SCL_ALL, RW_WRITER)); if (vd->vdev_leaf_zap != 0) { mutex_enter(&vd->vdev_trim_lock); uint64_t trim_state = VDEV_TRIM_NONE; int err = zap_lookup(vd->vdev_spa->spa_meta_objset, vd->vdev_leaf_zap, VDEV_LEAF_ZAP_TRIM_STATE, sizeof (trim_state), 1, &trim_state); ASSERT(err == 0 || err == ENOENT); vd->vdev_trim_state = trim_state; uint64_t timestamp = 0; err = zap_lookup(vd->vdev_spa->spa_meta_objset, vd->vdev_leaf_zap, VDEV_LEAF_ZAP_TRIM_ACTION_TIME, sizeof (timestamp), 1, ×tamp); ASSERT(err == 0 || err == ENOENT); vd->vdev_trim_action_time = timestamp; if (vd->vdev_trim_state == VDEV_TRIM_SUSPENDED || vd->vdev_offline) { /* load progress for reporting, but don't resume */ VERIFY0(vdev_trim_load(vd)); } else if (vd->vdev_trim_state == VDEV_TRIM_ACTIVE && vdev_writeable(vd) && !vd->vdev_top->vdev_removing && vd->vdev_trim_thread == NULL) { VERIFY0(vdev_trim_load(vd)); vdev_trim(vd, vd->vdev_trim_rate, vd->vdev_trim_partial, vd->vdev_trim_secure); } mutex_exit(&vd->vdev_trim_lock); } for (uint64_t i = 0; i < vd->vdev_children; i++) { vdev_trim_restart(vd->vdev_child[i]); } } /* * Used by the automatic TRIM when ZFS_DEBUG_TRIM is set to verify that * every TRIM range is contained within ms_allocatable. */ static void vdev_trim_range_verify(void *arg, uint64_t start, uint64_t size) { trim_args_t *ta = arg; metaslab_t *msp = ta->trim_msp; VERIFY3B(msp->ms_loaded, ==, B_TRUE); VERIFY3U(msp->ms_disabled, >, 0); VERIFY(range_tree_contains(msp->ms_allocatable, start, size)); } /* * Each automatic TRIM thread is responsible for managing the trimming of a * top-level vdev in the pool. No automatic TRIM state is maintained on-disk. * * N.B. This behavior is different from a manual TRIM where a thread * is created for each leaf vdev, instead of each top-level vdev. */ static void vdev_autotrim_thread(void *arg) { vdev_t *vd = arg; spa_t *spa = vd->vdev_spa; int shift = 0; mutex_enter(&vd->vdev_autotrim_lock); ASSERT3P(vd->vdev_top, ==, vd); ASSERT3P(vd->vdev_autotrim_thread, !=, NULL); mutex_exit(&vd->vdev_autotrim_lock); spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); uint64_t extent_bytes_max = zfs_trim_extent_bytes_max; uint64_t extent_bytes_min = zfs_trim_extent_bytes_min; while (!vdev_autotrim_should_stop(vd)) { int txgs_per_trim = MAX(zfs_trim_txg_batch, 1); boolean_t issued_trim = B_FALSE; /* * All of the metaslabs are divided in to groups of size * num_metaslabs / zfs_trim_txg_batch. Each of these groups * is composed of metaslabs which are spread evenly over the * device. * * For example, when zfs_trim_txg_batch = 32 (default) then * group 0 will contain metaslabs 0, 32, 64, ...; * group 1 will contain metaslabs 1, 33, 65, ...; * group 2 will contain metaslabs 2, 34, 66, ...; and so on. * * On each pass through the while() loop one of these groups * is selected. This is accomplished by using a shift value * to select the starting metaslab, then striding over the * metaslabs using the zfs_trim_txg_batch size. This is * done to accomplish two things. * * 1) By dividing the metaslabs in to groups, and making sure * that each group takes a minimum of one txg to process. * Then zfs_trim_txg_batch controls the minimum number of * txgs which must occur before a metaslab is revisited. * * 2) Selecting non-consecutive metaslabs distributes the * TRIM commands for a group evenly over the entire device. * This can be advantageous for certain types of devices. */ for (uint64_t i = shift % txgs_per_trim; i < vd->vdev_ms_count; i += txgs_per_trim) { metaslab_t *msp = vd->vdev_ms[i]; range_tree_t *trim_tree; spa_config_exit(spa, SCL_CONFIG, FTAG); metaslab_disable(msp); spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); mutex_enter(&msp->ms_lock); /* * Skip the metaslab when it has never been allocated * or when there are no recent frees to trim. */ if (msp->ms_sm == NULL || range_tree_is_empty(msp->ms_trim)) { mutex_exit(&msp->ms_lock); metaslab_enable(msp, B_FALSE, B_FALSE); continue; } /* * Skip the metaslab when it has already been disabled. * This may happen when a manual TRIM or initialize * operation is running concurrently. In the case * of a manual TRIM, the ms_trim tree will have been * vacated. Only ranges added after the manual TRIM * disabled the metaslab will be included in the tree. * These will be processed when the automatic TRIM * next revisits this metaslab. */ if (msp->ms_disabled > 1) { mutex_exit(&msp->ms_lock); metaslab_enable(msp, B_FALSE, B_FALSE); continue; } /* * Allocate an empty range tree which is swapped in * for the existing ms_trim tree while it is processed. */ trim_tree = range_tree_create(NULL, RANGE_SEG64, NULL, 0, 0); range_tree_swap(&msp->ms_trim, &trim_tree); ASSERT(range_tree_is_empty(msp->ms_trim)); /* * There are two cases when constructing the per-vdev * trim trees for a metaslab. If the top-level vdev * has no children then it is also a leaf and should * be trimmed. Otherwise our children are the leaves * and a trim tree should be constructed for each. */ trim_args_t *tap; uint64_t children = vd->vdev_children; if (children == 0) { children = 1; tap = kmem_zalloc(sizeof (trim_args_t) * children, KM_SLEEP); tap[0].trim_vdev = vd; } else { tap = kmem_zalloc(sizeof (trim_args_t) * children, KM_SLEEP); for (uint64_t c = 0; c < children; c++) { tap[c].trim_vdev = vd->vdev_child[c]; } } for (uint64_t c = 0; c < children; c++) { trim_args_t *ta = &tap[c]; vdev_t *cvd = ta->trim_vdev; ta->trim_msp = msp; ta->trim_extent_bytes_max = extent_bytes_max; ta->trim_extent_bytes_min = extent_bytes_min; ta->trim_type = TRIM_TYPE_AUTO; ta->trim_flags = 0; if (cvd->vdev_detached || !vdev_writeable(cvd) || !cvd->vdev_has_trim || cvd->vdev_trim_thread != NULL) { continue; } /* * When a device has an attached hot spare, or * is being replaced it will not be trimmed. * This is done to avoid adding additional * stress to a potentially unhealthy device, * and to minimize the required rebuild time. */ if (!cvd->vdev_ops->vdev_op_leaf) continue; ta->trim_tree = range_tree_create(NULL, RANGE_SEG64, NULL, 0, 0); range_tree_walk(trim_tree, vdev_trim_range_add, ta); } mutex_exit(&msp->ms_lock); spa_config_exit(spa, SCL_CONFIG, FTAG); /* * Issue the TRIM I/Os for all ranges covered by the * TRIM trees. These ranges are safe to TRIM because * no new allocations will be performed until the call * to metaslab_enabled() below. */ for (uint64_t c = 0; c < children; c++) { trim_args_t *ta = &tap[c]; /* * Always yield to a manual TRIM if one has * been started for the child vdev. */ if (ta->trim_tree == NULL || ta->trim_vdev->vdev_trim_thread != NULL) { continue; } /* * After this point metaslab_enable() must be * called with the sync flag set. This is done * here because vdev_trim_ranges() is allowed * to be interrupted (EINTR) before issuing all * of the required TRIM I/Os. */ issued_trim = B_TRUE; int error = vdev_trim_ranges(ta); if (error) break; } /* * Verify every range which was trimmed is still * contained within the ms_allocatable tree. */ if (zfs_flags & ZFS_DEBUG_TRIM) { mutex_enter(&msp->ms_lock); VERIFY0(metaslab_load(msp)); VERIFY3P(tap[0].trim_msp, ==, msp); range_tree_walk(trim_tree, vdev_trim_range_verify, &tap[0]); mutex_exit(&msp->ms_lock); } range_tree_vacate(trim_tree, NULL, NULL); range_tree_destroy(trim_tree); metaslab_enable(msp, issued_trim, B_FALSE); spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); for (uint64_t c = 0; c < children; c++) { trim_args_t *ta = &tap[c]; if (ta->trim_tree == NULL) continue; range_tree_vacate(ta->trim_tree, NULL, NULL); range_tree_destroy(ta->trim_tree); } kmem_free(tap, sizeof (trim_args_t) * children); } spa_config_exit(spa, SCL_CONFIG, FTAG); /* * After completing the group of metaslabs wait for the next * open txg. This is done to make sure that a minimum of * zfs_trim_txg_batch txgs will occur before these metaslabs * are trimmed again. */ txg_wait_open(spa_get_dsl(spa), 0, issued_trim); shift++; spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); } for (uint64_t c = 0; c < vd->vdev_children; c++) { vdev_t *cvd = vd->vdev_child[c]; mutex_enter(&cvd->vdev_trim_io_lock); while (cvd->vdev_trim_inflight[1] > 0) { cv_wait(&cvd->vdev_trim_io_cv, &cvd->vdev_trim_io_lock); } mutex_exit(&cvd->vdev_trim_io_lock); } spa_config_exit(spa, SCL_CONFIG, FTAG); /* * When exiting because the autotrim property was set to off, then * abandon any unprocessed ms_trim ranges to reclaim the memory. */ if (spa_get_autotrim(spa) == SPA_AUTOTRIM_OFF) { for (uint64_t i = 0; i < vd->vdev_ms_count; i++) { metaslab_t *msp = vd->vdev_ms[i]; mutex_enter(&msp->ms_lock); range_tree_vacate(msp->ms_trim, NULL, NULL); mutex_exit(&msp->ms_lock); } } mutex_enter(&vd->vdev_autotrim_lock); ASSERT(vd->vdev_autotrim_thread != NULL); vd->vdev_autotrim_thread = NULL; cv_broadcast(&vd->vdev_autotrim_cv); mutex_exit(&vd->vdev_autotrim_lock); thread_exit(); } /* * Starts an autotrim thread, if needed, for each top-level vdev which can be * trimmed. A top-level vdev which has been evacuated will never be trimmed. */ void vdev_autotrim(spa_t *spa) { vdev_t *root_vd = spa->spa_root_vdev; for (uint64_t i = 0; i < root_vd->vdev_children; i++) { vdev_t *tvd = root_vd->vdev_child[i]; mutex_enter(&tvd->vdev_autotrim_lock); if (vdev_writeable(tvd) && !tvd->vdev_removing && tvd->vdev_autotrim_thread == NULL) { ASSERT3P(tvd->vdev_top, ==, tvd); tvd->vdev_autotrim_thread = thread_create(NULL, 0, vdev_autotrim_thread, tvd, 0, &p0, TS_RUN, maxclsyspri); ASSERT(tvd->vdev_autotrim_thread != NULL); } mutex_exit(&tvd->vdev_autotrim_lock); } } /* * Wait for the vdev_autotrim_thread associated with the passed top-level * vdev to be terminated (canceled or stopped). */ void vdev_autotrim_stop_wait(vdev_t *tvd) { mutex_enter(&tvd->vdev_autotrim_lock); if (tvd->vdev_autotrim_thread != NULL) { tvd->vdev_autotrim_exit_wanted = B_TRUE; while (tvd->vdev_autotrim_thread != NULL) { cv_wait(&tvd->vdev_autotrim_cv, &tvd->vdev_autotrim_lock); } ASSERT3P(tvd->vdev_autotrim_thread, ==, NULL); tvd->vdev_autotrim_exit_wanted = B_FALSE; } mutex_exit(&tvd->vdev_autotrim_lock); } /* * Wait for all of the vdev_autotrim_thread associated with the pool to * be terminated (canceled or stopped). */ void vdev_autotrim_stop_all(spa_t *spa) { vdev_t *root_vd = spa->spa_root_vdev; for (uint64_t i = 0; i < root_vd->vdev_children; i++) vdev_autotrim_stop_wait(root_vd->vdev_child[i]); } /* * Conditionally restart all of the vdev_autotrim_thread's for the pool. */ void vdev_autotrim_restart(spa_t *spa) { ASSERT(MUTEX_HELD(&spa_namespace_lock)); if (spa->spa_autotrim) vdev_autotrim(spa); } static void vdev_trim_l2arc_thread(void *arg) { vdev_t *vd = arg; spa_t *spa = vd->vdev_spa; l2arc_dev_t *dev = l2arc_vdev_get(vd); trim_args_t ta; range_seg64_t physical_rs; ASSERT(vdev_is_concrete(vd)); spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER); vd->vdev_trim_last_offset = 0; vd->vdev_trim_rate = 0; vd->vdev_trim_partial = 0; vd->vdev_trim_secure = 0; bzero(&ta, sizeof (ta)); ta.trim_vdev = vd; ta.trim_tree = range_tree_create(NULL, RANGE_SEG64, NULL, 0, 0); ta.trim_type = TRIM_TYPE_MANUAL; ta.trim_extent_bytes_max = zfs_trim_extent_bytes_max; ta.trim_extent_bytes_min = SPA_MINBLOCKSIZE; ta.trim_flags = 0; physical_rs.rs_start = vd->vdev_trim_bytes_done = 0; physical_rs.rs_end = vd->vdev_trim_bytes_est = vdev_get_min_asize(vd); range_tree_add(ta.trim_tree, physical_rs.rs_start, physical_rs.rs_end - physical_rs.rs_start); mutex_enter(&vd->vdev_trim_lock); vdev_trim_change_state(vd, VDEV_TRIM_ACTIVE, 0, 0, 0); mutex_exit(&vd->vdev_trim_lock); (void) vdev_trim_ranges(&ta); spa_config_exit(spa, SCL_CONFIG, FTAG); mutex_enter(&vd->vdev_trim_io_lock); while (vd->vdev_trim_inflight[TRIM_TYPE_MANUAL] > 0) { cv_wait(&vd->vdev_trim_io_cv, &vd->vdev_trim_io_lock); } mutex_exit(&vd->vdev_trim_io_lock); range_tree_vacate(ta.trim_tree, NULL, NULL); range_tree_destroy(ta.trim_tree); mutex_enter(&vd->vdev_trim_lock); if (!vd->vdev_trim_exit_wanted && vdev_writeable(vd)) { vdev_trim_change_state(vd, VDEV_TRIM_COMPLETE, vd->vdev_trim_rate, vd->vdev_trim_partial, vd->vdev_trim_secure); } ASSERT(vd->vdev_trim_thread != NULL || vd->vdev_trim_inflight[TRIM_TYPE_MANUAL] == 0); /* * Drop the vdev_trim_lock while we sync out the txg since it's * possible that a device might be trying to come online and * must check to see if it needs to restart a trim. That thread * will be holding the spa_config_lock which would prevent the * txg_wait_synced from completing. Same strategy as in * vdev_trim_thread(). */ mutex_exit(&vd->vdev_trim_lock); txg_wait_synced(spa_get_dsl(vd->vdev_spa), 0); mutex_enter(&vd->vdev_trim_lock); /* * Update the header of the cache device here, before * broadcasting vdev_trim_cv which may lead to the removal * of the device. The same applies for setting l2ad_trim_all to * false. */ spa_config_enter(vd->vdev_spa, SCL_L2ARC, vd, RW_READER); bzero(dev->l2ad_dev_hdr, dev->l2ad_dev_hdr_asize); l2arc_dev_hdr_update(dev); spa_config_exit(vd->vdev_spa, SCL_L2ARC, vd); vd->vdev_trim_thread = NULL; if (vd->vdev_trim_state == VDEV_TRIM_COMPLETE) dev->l2ad_trim_all = B_FALSE; cv_broadcast(&vd->vdev_trim_cv); mutex_exit(&vd->vdev_trim_lock); thread_exit(); } /* * Punches out TRIM threads for the L2ARC devices in a spa and assigns them * to vd->vdev_trim_thread variable. This facilitates the management of * trimming the whole cache device using TRIM_TYPE_MANUAL upon addition * to a pool or pool creation or when the header of the device is invalid. */ void vdev_trim_l2arc(spa_t *spa) { ASSERT(MUTEX_HELD(&spa_namespace_lock)); /* * Locate the spa's l2arc devices and kick off TRIM threads. */ for (int i = 0; i < spa->spa_l2cache.sav_count; i++) { vdev_t *vd = spa->spa_l2cache.sav_vdevs[i]; l2arc_dev_t *dev = l2arc_vdev_get(vd); if (dev == NULL || !dev->l2ad_trim_all) { /* * Don't attempt TRIM if the vdev is UNAVAIL or if the * cache device was not marked for whole device TRIM * (ie l2arc_trim_ahead = 0, or the L2ARC device header * is valid with trim_state = VDEV_TRIM_COMPLETE and * l2ad_log_entries > 0). */ continue; } mutex_enter(&vd->vdev_trim_lock); ASSERT(vd->vdev_ops->vdev_op_leaf); ASSERT(vdev_is_concrete(vd)); ASSERT3P(vd->vdev_trim_thread, ==, NULL); ASSERT(!vd->vdev_detached); ASSERT(!vd->vdev_trim_exit_wanted); ASSERT(!vd->vdev_top->vdev_removing); vdev_trim_change_state(vd, VDEV_TRIM_ACTIVE, 0, 0, 0); vd->vdev_trim_thread = thread_create(NULL, 0, vdev_trim_l2arc_thread, vd, 0, &p0, TS_RUN, maxclsyspri); mutex_exit(&vd->vdev_trim_lock); } } /* * A wrapper which calls vdev_trim_ranges(). It is intended to be called * on leaf vdevs. */ int vdev_trim_simple(vdev_t *vd, uint64_t start, uint64_t size) { trim_args_t ta; range_seg64_t physical_rs; int error; physical_rs.rs_start = start; physical_rs.rs_end = start + size; ASSERT(vdev_is_concrete(vd)); ASSERT(vd->vdev_ops->vdev_op_leaf); ASSERT(!vd->vdev_detached); ASSERT(!vd->vdev_top->vdev_removing); bzero(&ta, sizeof (ta)); ta.trim_vdev = vd; ta.trim_tree = range_tree_create(NULL, RANGE_SEG64, NULL, 0, 0); ta.trim_type = TRIM_TYPE_SIMPLE; ta.trim_extent_bytes_max = zfs_trim_extent_bytes_max; ta.trim_extent_bytes_min = SPA_MINBLOCKSIZE; ta.trim_flags = 0; ASSERT3U(physical_rs.rs_end, >=, physical_rs.rs_start); if (physical_rs.rs_end > physical_rs.rs_start) { range_tree_add(ta.trim_tree, physical_rs.rs_start, physical_rs.rs_end - physical_rs.rs_start); } else { ASSERT3U(physical_rs.rs_end, ==, physical_rs.rs_start); } error = vdev_trim_ranges(&ta); mutex_enter(&vd->vdev_trim_io_lock); while (vd->vdev_trim_inflight[TRIM_TYPE_SIMPLE] > 0) { cv_wait(&vd->vdev_trim_io_cv, &vd->vdev_trim_io_lock); } mutex_exit(&vd->vdev_trim_io_lock); range_tree_vacate(ta.trim_tree, NULL, NULL); range_tree_destroy(ta.trim_tree); return (error); } EXPORT_SYMBOL(vdev_trim); EXPORT_SYMBOL(vdev_trim_stop); EXPORT_SYMBOL(vdev_trim_stop_all); EXPORT_SYMBOL(vdev_trim_stop_wait); EXPORT_SYMBOL(vdev_trim_restart); EXPORT_SYMBOL(vdev_autotrim); EXPORT_SYMBOL(vdev_autotrim_stop_all); EXPORT_SYMBOL(vdev_autotrim_stop_wait); EXPORT_SYMBOL(vdev_autotrim_restart); EXPORT_SYMBOL(vdev_trim_l2arc); EXPORT_SYMBOL(vdev_trim_simple); /* BEGIN CSTYLED */ ZFS_MODULE_PARAM(zfs_trim, zfs_trim_, extent_bytes_max, UINT, ZMOD_RW, "Max size of TRIM commands, larger will be split"); ZFS_MODULE_PARAM(zfs_trim, zfs_trim_, extent_bytes_min, UINT, ZMOD_RW, "Min size of TRIM commands, smaller will be skipped"); ZFS_MODULE_PARAM(zfs_trim, zfs_trim_, metaslab_skip, UINT, ZMOD_RW, "Skip metaslabs which have never been initialized"); ZFS_MODULE_PARAM(zfs_trim, zfs_trim_, txg_batch, UINT, ZMOD_RW, "Min number of txgs to aggregate frees before issuing TRIM"); ZFS_MODULE_PARAM(zfs_trim, zfs_trim_, queue_limit, UINT, ZMOD_RW, "Max queued TRIMs outstanding per leaf vdev"); /* END CSTYLED */