/* $OpenBSD: if_iwmreg.h,v 1.65 2021/10/11 09:03:22 stsp Exp $ */ /****************************************************************************** * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, * USA * * The full GNU General Public License is included in this distribution * in the file called COPYING. * * Contact Information: * Intel Linux Wireless * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * * BSD LICENSE * * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * *****************************************************************************/ #ifndef __IF_IWM_REG_H__ #define __IF_IWM_REG_H__ #define le16_to_cpup(_a_) (le16toh(*(const uint16_t *)(_a_))) #define le32_to_cpup(_a_) (le32toh(*(const uint32_t *)(_a_))) /* * BEGIN iwl-csr.h */ /* * CSR (control and status registers) * * CSR registers are mapped directly into PCI bus space, and are accessible * whenever platform supplies power to device, even when device is in * low power states due to driver-invoked device resets * (e.g. IWM_CSR_RESET_REG_FLAG_SW_RESET) or uCode-driven power-saving modes. * * Use iwl_write32() and iwl_read32() family to access these registers; * these provide simple PCI bus access, without waking up the MAC. * Do not use iwl_write_direct32() family for these registers; * no need to "grab nic access" via IWM_CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ. * The MAC (uCode processor, etc.) does not need to be powered up for accessing * the CSR registers. * * NOTE: Device does need to be awake in order to read this memory * via IWM_CSR_EEPROM and IWM_CSR_OTP registers */ #define IWM_CSR_HW_IF_CONFIG_REG (0x000) /* hardware interface config */ #define IWM_CSR_INT_COALESCING (0x004) /* accum ints, 32-usec units */ #define IWM_CSR_INT (0x008) /* host interrupt status/ack */ #define IWM_CSR_INT_MASK (0x00c) /* host interrupt enable */ #define IWM_CSR_FH_INT_STATUS (0x010) /* busmaster int status/ack*/ #define IWM_CSR_GPIO_IN (0x018) /* read external chip pins */ #define IWM_CSR_RESET (0x020) /* busmaster enable, NMI, etc*/ #define IWM_CSR_GP_CNTRL (0x024) /* 2nd byte of IWM_CSR_INT_COALESCING, not accessible via iwl_write32()! */ #define IWM_CSR_INT_PERIODIC_REG (0x005) /* * Hardware revision info * Bit fields: * 31-16: Reserved * 15-4: Type of device: see IWM_CSR_HW_REV_TYPE_xxx definitions * 3-2: Revision step: 0 = A, 1 = B, 2 = C, 3 = D * 1-0: "Dash" (-) value, as in A-1, etc. */ #define IWM_CSR_HW_REV (0x028) /* * EEPROM and OTP (one-time-programmable) memory reads * * NOTE: Device must be awake, initialized via apm_ops.init(), * in order to read. */ #define IWM_CSR_EEPROM_REG (0x02c) #define IWM_CSR_EEPROM_GP (0x030) #define IWM_CSR_OTP_GP_REG (0x034) #define IWM_CSR_GIO_REG (0x03C) #define IWM_CSR_GP_UCODE_REG (0x048) #define IWM_CSR_GP_DRIVER_REG (0x050) /* * UCODE-DRIVER GP (general purpose) mailbox registers. * SET/CLR registers set/clear bit(s) if "1" is written. */ #define IWM_CSR_UCODE_DRV_GP1 (0x054) #define IWM_CSR_UCODE_DRV_GP1_SET (0x058) #define IWM_CSR_UCODE_DRV_GP1_CLR (0x05c) #define IWM_CSR_UCODE_DRV_GP2 (0x060) #define IWM_CSR_MBOX_SET_REG (0x088) #define IWM_CSR_MBOX_SET_REG_OS_ALIVE 0x20 #define IWM_CSR_LED_REG (0x094) #define IWM_CSR_DRAM_INT_TBL_REG (0x0A0) #define IWM_CSR_MAC_SHADOW_REG_CTRL (0x0A8) /* 6000 and up */ /* GIO Chicken Bits (PCI Express bus link power management) */ #define IWM_CSR_GIO_CHICKEN_BITS (0x100) /* Analog phase-lock-loop configuration */ #define IWM_CSR_ANA_PLL_CFG (0x20c) /* * CSR Hardware Revision Workaround Register. Indicates hardware rev; * "step" determines CCK backoff for txpower calculation. Used for 4965 only. * See also IWM_CSR_HW_REV register. * Bit fields: * 3-2: 0 = A, 1 = B, 2 = C, 3 = D step * 1-0: "Dash" (-) value, as in C-1, etc. */ #define IWM_CSR_HW_REV_WA_REG (0x22C) #define IWM_CSR_DBG_HPET_MEM_REG (0x240) #define IWM_CSR_DBG_LINK_PWR_MGMT_REG (0x250) /* Bits for IWM_CSR_HW_IF_CONFIG_REG */ #define IWM_CSR_HW_IF_CONFIG_REG_MSK_MAC_DASH (0x00000003) #define IWM_CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP (0x0000000C) #define IWM_CSR_HW_IF_CONFIG_REG_MSK_BOARD_VER (0x000000C0) #define IWM_CSR_HW_IF_CONFIG_REG_BIT_MAC_SI (0x00000100) #define IWM_CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI (0x00000200) #define IWM_CSR_HW_IF_CONFIG_REG_MSK_PHY_TYPE (0x00000C00) #define IWM_CSR_HW_IF_CONFIG_REG_MSK_PHY_DASH (0x00003000) #define IWM_CSR_HW_IF_CONFIG_REG_MSK_PHY_STEP (0x0000C000) #define IWM_CSR_HW_IF_CONFIG_REG_POS_MAC_DASH (0) #define IWM_CSR_HW_IF_CONFIG_REG_POS_MAC_STEP (2) #define IWM_CSR_HW_IF_CONFIG_REG_POS_BOARD_VER (6) #define IWM_CSR_HW_IF_CONFIG_REG_POS_PHY_TYPE (10) #define IWM_CSR_HW_IF_CONFIG_REG_POS_PHY_DASH (12) #define IWM_CSR_HW_IF_CONFIG_REG_POS_PHY_STEP (14) #define IWM_CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A (0x00080000) #define IWM_CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000) #define IWM_CSR_HW_IF_CONFIG_REG_BIT_NIC_READY (0x00400000) /* PCI_OWN_SEM */ #define IWM_CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE (0x02000000) /* ME_OWN */ #define IWM_CSR_HW_IF_CONFIG_REG_PREPARE (0x08000000) /* WAKE_ME */ #define IWM_CSR_HW_IF_CONFIG_REG_ENABLE_PME (0x10000000) #define IWM_CSR_HW_IF_CONFIG_REG_PERSIST_MODE (0x40000000) /* PERSISTENCE */ #define IWM_CSR_INT_PERIODIC_DIS (0x00) /* disable periodic int*/ #define IWM_CSR_INT_PERIODIC_ENA (0xFF) /* 255*32 usec ~ 8 msec*/ /* interrupt flags in INTA, set by uCode or hardware (e.g. dma), * acknowledged (reset) by host writing "1" to flagged bits. */ #define IWM_CSR_INT_BIT_FH_RX (1U << 31) /* Rx DMA, cmd responses, FH_INT[17:16] */ #define IWM_CSR_INT_BIT_HW_ERR (1 << 29) /* DMA hardware error FH_INT[31] */ #define IWM_CSR_INT_BIT_RX_PERIODIC (1 << 28) /* Rx periodic */ #define IWM_CSR_INT_BIT_FH_TX (1 << 27) /* Tx DMA FH_INT[1:0] */ #define IWM_CSR_INT_BIT_SCD (1 << 26) /* TXQ pointer advanced */ #define IWM_CSR_INT_BIT_SW_ERR (1 << 25) /* uCode error */ #define IWM_CSR_INT_BIT_RF_KILL (1 << 7) /* HW RFKILL switch GP_CNTRL[27] toggled */ #define IWM_CSR_INT_BIT_CT_KILL (1 << 6) /* Critical temp (chip too hot) rfkill */ #define IWM_CSR_INT_BIT_SW_RX (1 << 3) /* Rx, command responses */ #define IWM_CSR_INT_BIT_WAKEUP (1 << 1) /* NIC controller waking up (pwr mgmt) */ #define IWM_CSR_INT_BIT_ALIVE (1 << 0) /* uCode interrupts once it initializes */ #define IWM_CSR_INI_SET_MASK (IWM_CSR_INT_BIT_FH_RX | \ IWM_CSR_INT_BIT_HW_ERR | \ IWM_CSR_INT_BIT_FH_TX | \ IWM_CSR_INT_BIT_SW_ERR | \ IWM_CSR_INT_BIT_RF_KILL | \ IWM_CSR_INT_BIT_SW_RX | \ IWM_CSR_INT_BIT_WAKEUP | \ IWM_CSR_INT_BIT_ALIVE | \ IWM_CSR_INT_BIT_RX_PERIODIC) /* interrupt flags in FH (flow handler) (PCI busmaster DMA) */ #define IWM_CSR_FH_INT_BIT_ERR (1U << 31) /* Error */ #define IWM_CSR_FH_INT_BIT_HI_PRIOR (1 << 30) /* High priority Rx, bypass coalescing */ #define IWM_CSR_FH_INT_BIT_RX_CHNL1 (1 << 17) /* Rx channel 1 */ #define IWM_CSR_FH_INT_BIT_RX_CHNL0 (1 << 16) /* Rx channel 0 */ #define IWM_CSR_FH_INT_BIT_TX_CHNL1 (1 << 1) /* Tx channel 1 */ #define IWM_CSR_FH_INT_BIT_TX_CHNL0 (1 << 0) /* Tx channel 0 */ #define IWM_CSR_FH_INT_RX_MASK (IWM_CSR_FH_INT_BIT_HI_PRIOR | \ IWM_CSR_FH_INT_BIT_RX_CHNL1 | \ IWM_CSR_FH_INT_BIT_RX_CHNL0) #define IWM_CSR_FH_INT_TX_MASK (IWM_CSR_FH_INT_BIT_TX_CHNL1 | \ IWM_CSR_FH_INT_BIT_TX_CHNL0) /* GPIO */ #define IWM_CSR_GPIO_IN_BIT_AUX_POWER (0x00000200) #define IWM_CSR_GPIO_IN_VAL_VAUX_PWR_SRC (0x00000000) #define IWM_CSR_GPIO_IN_VAL_VMAIN_PWR_SRC (0x00000200) /* RESET */ #define IWM_CSR_RESET_REG_FLAG_NEVO_RESET (0x00000001) #define IWM_CSR_RESET_REG_FLAG_FORCE_NMI (0x00000002) #define IWM_CSR_RESET_REG_FLAG_SW_RESET (0x00000080) #define IWM_CSR_RESET_REG_FLAG_MASTER_DISABLED (0x00000100) #define IWM_CSR_RESET_REG_FLAG_STOP_MASTER (0x00000200) #define IWM_CSR_RESET_LINK_PWR_MGMT_DISABLED (0x80000000) /* * GP (general purpose) CONTROL REGISTER * Bit fields: * 27: HW_RF_KILL_SW * Indicates state of (platform's) hardware RF-Kill switch * 26-24: POWER_SAVE_TYPE * Indicates current power-saving mode: * 000 -- No power saving * 001 -- MAC power-down * 010 -- PHY (radio) power-down * 011 -- Error * 9-6: SYS_CONFIG * Indicates current system configuration, reflecting pins on chip * as forced high/low by device circuit board. * 4: GOING_TO_SLEEP * Indicates MAC is entering a power-saving sleep power-down. * Not a good time to access device-internal resources. * 3: MAC_ACCESS_REQ * Host sets this to request and maintain MAC wakeup, to allow host * access to device-internal resources. Host must wait for * MAC_CLOCK_READY (and !GOING_TO_SLEEP) before accessing non-CSR * device registers. * 2: INIT_DONE * Host sets this to put device into fully operational D0 power mode. * Host resets this after SW_RESET to put device into low power mode. * 0: MAC_CLOCK_READY * Indicates MAC (ucode processor, etc.) is powered up and can run. * Internal resources are accessible. * NOTE: This does not indicate that the processor is actually running. * NOTE: This does not indicate that device has completed * init or post-power-down restore of internal SRAM memory. * Use IWM_CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP as indication that * SRAM is restored and uCode is in normal operation mode. * Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and * do not need to save/restore it. * NOTE: After device reset, this bit remains "0" until host sets * INIT_DONE */ #define IWM_CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY (0x00000001) #define IWM_CSR_GP_CNTRL_REG_FLAG_INIT_DONE (0x00000004) #define IWM_CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ (0x00000008) #define IWM_CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP (0x00000010) #define IWM_CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN (0x00000001) #define IWM_CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE (0x07000000) #define IWM_CSR_GP_CNTRL_REG_FLAG_RFKILL_WAKE_L1A_EN (0x04000000) #define IWM_CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW (0x08000000) /* HW REV */ #define IWM_CSR_HW_REV_DASH(_val) (((_val) & 0x0000003) >> 0) #define IWM_CSR_HW_REV_STEP(_val) (((_val) & 0x000000C) >> 2) /** * hw_rev values */ enum { IWM_SILICON_A_STEP = 0, IWM_SILICON_B_STEP, IWM_SILICON_C_STEP, }; #define IWM_CSR_HW_REV_TYPE_MSK (0x000FFF0) #define IWM_CSR_HW_REV_TYPE_5300 (0x0000020) #define IWM_CSR_HW_REV_TYPE_5350 (0x0000030) #define IWM_CSR_HW_REV_TYPE_5100 (0x0000050) #define IWM_CSR_HW_REV_TYPE_5150 (0x0000040) #define IWM_CSR_HW_REV_TYPE_1000 (0x0000060) #define IWM_CSR_HW_REV_TYPE_6x00 (0x0000070) #define IWM_CSR_HW_REV_TYPE_6x50 (0x0000080) #define IWM_CSR_HW_REV_TYPE_6150 (0x0000084) #define IWM_CSR_HW_REV_TYPE_6x05 (0x00000B0) #define IWM_CSR_HW_REV_TYPE_6x30 IWM_CSR_HW_REV_TYPE_6x05 #define IWM_CSR_HW_REV_TYPE_6x35 IWM_CSR_HW_REV_TYPE_6x05 #define IWM_CSR_HW_REV_TYPE_2x30 (0x00000C0) #define IWM_CSR_HW_REV_TYPE_2x00 (0x0000100) #define IWM_CSR_HW_REV_TYPE_105 (0x0000110) #define IWM_CSR_HW_REV_TYPE_135 (0x0000120) #define IWM_CSR_HW_REV_TYPE_7265D (0x0000210) #define IWM_CSR_HW_REV_TYPE_NONE (0x00001F0) /* EEPROM REG */ #define IWM_CSR_EEPROM_REG_READ_VALID_MSK (0x00000001) #define IWM_CSR_EEPROM_REG_BIT_CMD (0x00000002) #define IWM_CSR_EEPROM_REG_MSK_ADDR (0x0000FFFC) #define IWM_CSR_EEPROM_REG_MSK_DATA (0xFFFF0000) /* EEPROM GP */ #define IWM_CSR_EEPROM_GP_VALID_MSK (0x00000007) /* signature */ #define IWM_CSR_EEPROM_GP_IF_OWNER_MSK (0x00000180) #define IWM_CSR_EEPROM_GP_BAD_SIGNATURE_BOTH_EEP_AND_OTP (0x00000000) #define IWM_CSR_EEPROM_GP_BAD_SIG_EEP_GOOD_SIG_OTP (0x00000001) #define IWM_CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K (0x00000002) #define IWM_CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K (0x00000004) /* One-time-programmable memory general purpose reg */ #define IWM_CSR_OTP_GP_REG_DEVICE_SELECT (0x00010000) /* 0 - EEPROM, 1 - OTP */ #define IWM_CSR_OTP_GP_REG_OTP_ACCESS_MODE (0x00020000) /* 0 - absolute, 1 - relative */ #define IWM_CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK (0x00100000) /* bit 20 */ #define IWM_CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK (0x00200000) /* bit 21 */ /* GP REG */ #define IWM_CSR_GP_REG_POWER_SAVE_STATUS_MSK (0x03000000) /* bit 24/25 */ #define IWM_CSR_GP_REG_NO_POWER_SAVE (0x00000000) #define IWM_CSR_GP_REG_MAC_POWER_SAVE (0x01000000) #define IWM_CSR_GP_REG_PHY_POWER_SAVE (0x02000000) #define IWM_CSR_GP_REG_POWER_SAVE_ERROR (0x03000000) /* CSR GIO */ #define IWM_CSR_GIO_REG_VAL_L0S_ENABLED (0x00000002) /* * UCODE-DRIVER GP (general purpose) mailbox register 1 * Host driver and uCode write and/or read this register to communicate with * each other. * Bit fields: * 4: UCODE_DISABLE * Host sets this to request permanent halt of uCode, same as * sending CARD_STATE command with "halt" bit set. * 3: CT_KILL_EXIT * Host sets this to request exit from CT_KILL state, i.e. host thinks * device temperature is low enough to continue normal operation. * 2: CMD_BLOCKED * Host sets this during RF KILL power-down sequence (HW, SW, CT KILL) * to release uCode to clear all Tx and command queues, enter * unassociated mode, and power down. * NOTE: Some devices also use HBUS_TARG_MBX_C register for this bit. * 1: SW_BIT_RFKILL * Host sets this when issuing CARD_STATE command to request * device sleep. * 0: MAC_SLEEP * uCode sets this when preparing a power-saving power-down. * uCode resets this when power-up is complete and SRAM is sane. * NOTE: device saves internal SRAM data to host when powering down, * and must restore this data after powering back up. * MAC_SLEEP is the best indication that restore is complete. * Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and * do not need to save/restore it. */ #define IWM_CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP (0x00000001) #define IWM_CSR_UCODE_SW_BIT_RFKILL (0x00000002) #define IWM_CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED (0x00000004) #define IWM_CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT (0x00000008) #define IWM_CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE (0x00000020) /* GP Driver */ #define IWM_CSR_GP_DRIVER_REG_BIT_RADIO_SKU_MSK (0x00000003) #define IWM_CSR_GP_DRIVER_REG_BIT_RADIO_SKU_3x3_HYB (0x00000000) #define IWM_CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_HYB (0x00000001) #define IWM_CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA (0x00000002) #define IWM_CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6 (0x00000004) #define IWM_CSR_GP_DRIVER_REG_BIT_6050_1x2 (0x00000008) #define IWM_CSR_GP_DRIVER_REG_BIT_RADIO_IQ_INVER (0x00000080) /* GIO Chicken Bits (PCI Express bus link power management) */ #define IWM_CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX (0x00800000) #define IWM_CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER (0x20000000) /* LED */ #define IWM_CSR_LED_BSM_CTRL_MSK (0xFFFFFFDF) #define IWM_CSR_LED_REG_TURN_ON (0x60) #define IWM_CSR_LED_REG_TURN_OFF (0x20) /* ANA_PLL */ #define IWM_CSR50_ANA_PLL_CFG_VAL (0x00880300) /* HPET MEM debug */ #define IWM_CSR_DBG_HPET_MEM_REG_VAL (0xFFFF0000) /* DRAM INT TABLE */ #define IWM_CSR_DRAM_INT_TBL_ENABLE (1U << 31) #define IWM_CSR_DRAM_INIT_TBL_WRITE_POINTER (1 << 28) #define IWM_CSR_DRAM_INIT_TBL_WRAP_CHECK (1 << 27) /* SECURE boot registers */ #define IWM_CSR_SECURE_BOOT_CONFIG_ADDR (0x100) #define IWM_CSR_SECURE_BOOT_CONFIG_INSPECTOR_BURNED_IN_OTP 0x00000001 #define IWM_CSR_SECURE_BOOT_CONFIG_INSPECTOR_NOT_REQ 0x00000002 #define IWM_CSR_SECURE_BOOT_CPU1_STATUS_ADDR (0x100) #define IWM_CSR_SECURE_BOOT_CPU2_STATUS_ADDR (0x100) #define IWM_CSR_SECURE_BOOT_CPU_STATUS_VERF_STATUS 0x00000003 #define IWM_CSR_SECURE_BOOT_CPU_STATUS_VERF_COMPLETED 0x00000002 #define IWM_CSR_SECURE_BOOT_CPU_STATUS_VERF_SUCCESS 0x00000004 #define IWM_CSR_SECURE_BOOT_CPU_STATUS_VERF_FAIL 0x00000008 #define IWM_CSR_SECURE_BOOT_CPU_STATUS_SIGN_VERF_FAIL 0x00000010 #define IWM_FH_UCODE_LOAD_STATUS 0x1af0 #define IWM_FH_MEM_TB_MAX_LENGTH 0x20000 /* 9000 rx series registers */ #define IWM_RFH_Q0_FRBDCB_BA_LSB 0xA08000 /* 64 bit address */ #define IWM_RFH_Q_FRBDCB_BA_LSB(q) (IWM_RFH_Q0_FRBDCB_BA_LSB + (q) * 8) /* Write index table */ #define IWM_RFH_Q0_FRBDCB_WIDX 0xA08080 #define IWM_RFH_Q_FRBDCB_WIDX(q) (IWM_RFH_Q0_FRBDCB_WIDX + (q) * 4) /* Write index table - shadow registers */ #define IWM_RFH_Q0_FRBDCB_WIDX_TRG 0x1C80 #define IWM_RFH_Q_FRBDCB_WIDX_TRG(q) (IWM_RFH_Q0_FRBDCB_WIDX_TRG + (q) * 4) /* Read index table */ #define IWM_RFH_Q0_FRBDCB_RIDX 0xA080C0 #define IWM_RFH_Q_FRBDCB_RIDX(q) (IWM_RFH_Q0_FRBDCB_RIDX + (q) * 4) /* Used list table */ #define IWM_RFH_Q0_URBDCB_BA_LSB 0xA08100 /* 64 bit address */ #define IWM_RFH_Q_URBDCB_BA_LSB(q) (IWM_RFH_Q0_URBDCB_BA_LSB + (q) * 8) /* Write index table */ #define IWM_RFH_Q0_URBDCB_WIDX 0xA08180 #define IWM_RFH_Q_URBDCB_WIDX(q) (IWM_RFH_Q0_URBDCB_WIDX + (q) * 4) #define IWM_RFH_Q0_URBDCB_VAID 0xA081C0 #define IWM_RFH_Q_URBDCB_VAID(q) (IWM_RFH_Q0_URBDCB_VAID + (q) * 4) /* stts */ #define IWM_RFH_Q0_URBD_STTS_WPTR_LSB 0xA08200 /*64 bits address */ #define IWM_RFH_Q_URBD_STTS_WPTR_LSB(q) (IWM_RFH_Q0_URBD_STTS_WPTR_LSB + (q) * 8) #define IWM_RFH_Q0_ORB_WPTR_LSB 0xA08280 #define IWM_RFH_Q_ORB_WPTR_LSB(q) (IWM_RFH_Q0_ORB_WPTR_LSB + (q) * 8) #define IWM_RFH_RBDBUF_RBD0_LSB 0xA08300 #define IWM_RFH_RBDBUF_RBD_LSB(q) (IWM_RFH_RBDBUF_RBD0_LSB + (q) * 8) /** * RFH Status Register * * Bit fields: * * Bit 29: RBD_FETCH_IDLE * This status flag is set by the RFH when there is no active RBD fetch from * DRAM. * Once the RFH RBD controller starts fetching (or when there is a pending * RBD read response from DRAM), this flag is immediately turned off. * * Bit 30: SRAM_DMA_IDLE * This status flag is set by the RFH when there is no active transaction from * SRAM to DRAM. * Once the SRAM to DRAM DMA is active, this flag is immediately turned off. * * Bit 31: RXF_DMA_IDLE * This status flag is set by the RFH when there is no active transaction from * RXF to DRAM. * Once the RXF-to-DRAM DMA is active, this flag is immediately turned off. */ #define IWM_RFH_GEN_STATUS 0xA09808 #define IWM_RFH_GEN_STATUS_GEN3 0xA07824 #define IWM_RBD_FETCH_IDLE (1 << 29) #define IWM_SRAM_DMA_IDLE (1 << 30) #define IWM_RXF_DMA_IDLE (1U << 31) /* DMA configuration */ #define IWM_RFH_RXF_DMA_CFG 0xA09820 #define IWM_RFH_RXF_DMA_CFG_GEN3 0xA07880 /* RB size */ #define IWM_RFH_RXF_DMA_RB_SIZE_MASK (0x000F0000) /* bits 16-19 */ #define IWM_RFH_RXF_DMA_RB_SIZE_POS 16 #define IWM_RFH_RXF_DMA_RB_SIZE_1K (0x1 << IWM_RFH_RXF_DMA_RB_SIZE_POS) #define IWM_RFH_RXF_DMA_RB_SIZE_2K (0x2 << IWM_RFH_RXF_DMA_RB_SIZE_POS) #define IWM_RFH_RXF_DMA_RB_SIZE_4K (0x4 << IWM_RFH_RXF_DMA_RB_SIZE_POS) #define IWM_RFH_RXF_DMA_RB_SIZE_8K (0x8 << IWM_RFH_RXF_DMA_RB_SIZE_POS) #define IWM_RFH_RXF_DMA_RB_SIZE_12K (0x9 << IWM_RFH_RXF_DMA_RB_SIZE_POS) #define IWM_RFH_RXF_DMA_RB_SIZE_16K (0xA << IWM_RFH_RXF_DMA_RB_SIZE_POS) #define IWM_RFH_RXF_DMA_RB_SIZE_20K (0xB << IWM_RFH_RXF_DMA_RB_SIZE_POS) #define IWM_RFH_RXF_DMA_RB_SIZE_24K (0xC << IWM_RFH_RXF_DMA_RB_SIZE_POS) #define IWM_RFH_RXF_DMA_RB_SIZE_28K (0xD << IWM_RFH_RXF_DMA_RB_SIZE_POS) #define IWM_RFH_RXF_DMA_RB_SIZE_32K (0xE << IWM_RFH_RXF_DMA_RB_SIZE_POS) /* RB Circular Buffer size:defines the table sizes in RBD units */ #define IWM_RFH_RXF_DMA_RBDCB_SIZE_MASK (0x00F00000) /* bits 20-23 */ #define IWM_RFH_RXF_DMA_RBDCB_SIZE_POS 20 #define IWM_RFH_RXF_DMA_RBDCB_SIZE_8 (0x3 << IWM_RFH_RXF_DMA_RBDCB_SIZE_POS) #define IWM_RFH_RXF_DMA_RBDCB_SIZE_16 (0x4 << IWM_RFH_RXF_DMA_RBDCB_SIZE_POS) #define IWM_RFH_RXF_DMA_RBDCB_SIZE_32 (0x5 << IWM_RFH_RXF_DMA_RBDCB_SIZE_POS) #define IWM_RFH_RXF_DMA_RBDCB_SIZE_64 (0x7 << IWM_RFH_RXF_DMA_RBDCB_SIZE_POS) #define IWM_RFH_RXF_DMA_RBDCB_SIZE_128 (0x7 << IWM_RFH_RXF_DMA_RBDCB_SIZE_POS) #define IWM_RFH_RXF_DMA_RBDCB_SIZE_256 (0x8 << IWM_RFH_RXF_DMA_RBDCB_SIZE_POS) #define IWM_RFH_RXF_DMA_RBDCB_SIZE_512 (0x9 << IWM_RFH_RXF_DMA_RBDCB_SIZE_POS) #define IWM_RFH_RXF_DMA_RBDCB_SIZE_1024 (0xA << IWM_RFH_RXF_DMA_RBDCB_SIZE_POS) #define IWM_RFH_RXF_DMA_RBDCB_SIZE_2048 (0xB << IWM_RFH_RXF_DMA_RBDCB_SIZE_POS) #define IWM_RFH_RXF_DMA_MIN_RB_SIZE_MASK (0x03000000) /* bit 24-25 */ #define IWM_RFH_RXF_DMA_MIN_RB_SIZE_POS 24 #define IWM_RFH_RXF_DMA_MIN_RB_4_8 (3 << IWM_RFH_RXF_DMA_MIN_RB_SIZE_POS) #define IWM_RFH_RXF_DMA_DROP_TOO_LARGE_MASK (0x04000000) /* bit 26 */ #define IWM_RFH_RXF_DMA_SINGLE_FRAME_MASK (0x20000000) /* bit 29 */ #define IWM_RFH_DMA_EN_MASK (0xC0000000) /* bits 30-31*/ #define IWM_RFH_DMA_EN_ENABLE_VAL (1U << 31) #define IWM_RFH_RXF_RXQ_ACTIVE 0xA0980C #define IWM_RFH_GEN_CFG 0xA09800 #define IWM_RFH_GEN_CFG_SERVICE_DMA_SNOOP (1 << 0) #define IWM_RFH_GEN_CFG_RFH_DMA_SNOOP (1 << 1) #define IWM_RFH_GEN_CFG_RB_CHUNK_SIZE_128 0x00000010 #define IWM_RFH_GEN_CFG_RB_CHUNK_SIZE_64 0x00000000 /* the driver assumes everywhere that the default RXQ is 0 */ #define IWM_RFH_GEN_CFG_DEFAULT_RXQ_NUM 0xF00 /* end of 9000 rx series registers */ #define IWM_LMPM_SECURE_UCODE_LOAD_CPU1_HDR_ADDR 0x1e78 #define IWM_LMPM_SECURE_UCODE_LOAD_CPU2_HDR_ADDR 0x1e7c #define IWM_LMPM_SECURE_CPU1_HDR_MEM_SPACE 0x420000 #define IWM_LMPM_SECURE_CPU2_HDR_MEM_SPACE 0x420400 #define IWM_CSR_SECURE_TIME_OUT (100) /* extended range in FW SRAM */ #define IWM_FW_MEM_EXTENDED_START 0x40000 #define IWM_FW_MEM_EXTENDED_END 0x57FFF /* FW chicken bits */ #define IWM_LMPM_CHICK 0xa01ff8 #define IWM_LMPM_CHICK_EXTENDED_ADDR_SPACE 0x01 #define IWM_FH_TCSR_0_REG0 (0x1D00) /* * HBUS (Host-side Bus) * * HBUS registers are mapped directly into PCI bus space, but are used * to indirectly access device's internal memory or registers that * may be powered-down. * * Use iwl_write_direct32()/iwl_read_direct32() family for these registers; * host must "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ * to make sure the MAC (uCode processor, etc.) is powered up for accessing * internal resources. * * Do not use iwl_write32()/iwl_read32() family to access these registers; * these provide only simple PCI bus access, without waking up the MAC. */ #define IWM_HBUS_BASE (0x400) /* * Registers for accessing device's internal SRAM memory (e.g. SCD SRAM * structures, error log, event log, verifying uCode load). * First write to address register, then read from or write to data register * to complete the job. Once the address register is set up, accesses to * data registers auto-increment the address by one dword. * Bit usage for address registers (read or write): * 0-31: memory address within device */ #define IWM_HBUS_TARG_MEM_RADDR (IWM_HBUS_BASE+0x00c) #define IWM_HBUS_TARG_MEM_WADDR (IWM_HBUS_BASE+0x010) #define IWM_HBUS_TARG_MEM_WDAT (IWM_HBUS_BASE+0x018) #define IWM_HBUS_TARG_MEM_RDAT (IWM_HBUS_BASE+0x01c) /* Mailbox C, used as workaround alternative to CSR_UCODE_DRV_GP1 mailbox */ #define IWM_HBUS_TARG_MBX_C (IWM_HBUS_BASE+0x030) #define IWM_HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED (0x00000004) /* * Registers for accessing device's internal peripheral registers * (e.g. SCD, BSM, etc.). First write to address register, * then read from or write to data register to complete the job. * Bit usage for address registers (read or write): * 0-15: register address (offset) within device * 24-25: (# bytes - 1) to read or write (e.g. 3 for dword) */ #define IWM_HBUS_TARG_PRPH_WADDR (IWM_HBUS_BASE+0x044) #define IWM_HBUS_TARG_PRPH_RADDR (IWM_HBUS_BASE+0x048) #define IWM_HBUS_TARG_PRPH_WDAT (IWM_HBUS_BASE+0x04c) #define IWM_HBUS_TARG_PRPH_RDAT (IWM_HBUS_BASE+0x050) /* enable the ID buf for read */ #define IWM_WFPM_PS_CTL_CLR 0xa0300c #define IWM_WFMP_MAC_ADDR_0 0xa03080 #define IWM_WFMP_MAC_ADDR_1 0xa03084 #define IWM_LMPM_PMG_EN 0xa01cec #define IWM_RADIO_REG_SYS_MANUAL_DFT_0 0xad4078 #define IWM_RFIC_REG_RD 0xad0470 #define IWM_WFPM_CTRL_REG 0xa03030 #define IWM_WFPM_AUX_CTL_AUX_IF_MAC_OWNER_MSK 0x08000000 #define IWM_ENABLE_WFPM 0x80000000 #define IWM_AUX_MISC_REG 0xa200b0 #define IWM_HW_STEP_LOCATION_BITS 24 #define IWM_AUX_MISC_MASTER1_EN 0xa20818 #define IWM_AUX_MISC_MASTER1_EN_SBE_MSK 0x1 #define IWM_AUX_MISC_MASTER1_SMPHR_STATUS 0xa20800 #define IWM_RSA_ENABLE 0xa24b08 #define IWM_PREG_AUX_BUS_WPROT_0 0xa04cc0 #define IWM_PREG_PRPH_WPROT_9000 0xa04ce0 #define IWM_PREG_PRPH_WPROT_22000 0xa04d00 #define IWM_SB_CFG_OVERRIDE_ADDR 0xa26c78 #define IWM_SB_CFG_OVERRIDE_ENABLE 0x8000 #define IWM_SB_CFG_BASE_OVERRIDE 0xa20000 #define IWM_SB_MODIFY_CFG_FLAG 0xa03088 #define IWM_SB_CPU_1_STATUS 0xa01e30 #define IWM_SB_CPU_2_STATUS 0Xa01e34 #define IWM_UREG_CHICK 0xa05c00 #define IWM_UREG_CHICK_MSI_ENABLE (1 << 24) #define IWM_UREG_CHICK_MSIX_ENABLE (1 << 25) #define IWM_HPM_DEBUG 0xa03440 #define IWM_HPM_PERSISTENCE_BIT (1 << 12) #define IWM_PREG_WFPM_ACCESS (1 << 12) /* Used to enable DBGM */ #define IWM_HBUS_TARG_TEST_REG (IWM_HBUS_BASE+0x05c) /* * Per-Tx-queue write pointer (index, really!) * Indicates index to next TFD that driver will fill (1 past latest filled). * Bit usage: * 0-7: queue write index * 11-8: queue selector */ #define IWM_HBUS_TARG_WRPTR (IWM_HBUS_BASE+0x060) /********************************************************** * CSR values **********************************************************/ /* * host interrupt timeout value * used with setting interrupt coalescing timer * the CSR_INT_COALESCING is an 8 bit register in 32-usec unit * * default interrupt coalescing timer is 64 x 32 = 2048 usecs */ #define IWM_HOST_INT_TIMEOUT_MAX (0xFF) #define IWM_HOST_INT_TIMEOUT_DEF (0x40) #define IWM_HOST_INT_TIMEOUT_MIN (0x0) #define IWM_HOST_INT_OPER_MODE (1U << 31) /***************************************************************************** * 7000/3000 series SHR DTS addresses * *****************************************************************************/ /* Diode Results Register Structure: */ #define IWM_DTS_DIODE_REG_DIG_VAL 0x000000FF /* bits [7:0] */ #define IWM_DTS_DIODE_REG_VREF_LOW 0x0000FF00 /* bits [15:8] */ #define IWM_DTS_DIODE_REG_VREF_HIGH 0x00FF0000 /* bits [23:16] */ #define IWM_DTS_DIODE_REG_VREF_ID 0x03000000 /* bits [25:24] */ #define IWM_DTS_DIODE_REG_PASS_ONCE 0x80000000 /* bits [31:31] */ #define IWM_DTS_DIODE_REG_FLAGS_MSK 0xFF000000 /* bits [31:24] */ /* Those are the masks INSIDE the flags bit-field: */ #define IWM_DTS_DIODE_REG_FLAGS_VREFS_ID_POS 0 #define IWM_DTS_DIODE_REG_FLAGS_VREFS_ID 0x00000003 /* bits [1:0] */ #define IWM_DTS_DIODE_REG_FLAGS_PASS_ONCE_POS 7 #define IWM_DTS_DIODE_REG_FLAGS_PASS_ONCE 0x00000080 /* bits [7:7] */ /***************************************************************************** * MSIX related registers * *****************************************************************************/ #define IWM_CSR_MSIX_BASE (0x2000) #define IWM_CSR_MSIX_FH_INT_CAUSES_AD (IWM_CSR_MSIX_BASE + 0x800) #define IWM_CSR_MSIX_FH_INT_MASK_AD (IWM_CSR_MSIX_BASE + 0x804) #define IWM_CSR_MSIX_HW_INT_CAUSES_AD (IWM_CSR_MSIX_BASE + 0x808) #define IWM_CSR_MSIX_HW_INT_MASK_AD (IWM_CSR_MSIX_BASE + 0x80C) #define IWM_CSR_MSIX_AUTOMASK_ST_AD (IWM_CSR_MSIX_BASE + 0x810) #define IWM_CSR_MSIX_RX_IVAR_AD_REG (IWM_CSR_MSIX_BASE + 0x880) #define IWM_CSR_MSIX_IVAR_AD_REG (IWM_CSR_MSIX_BASE + 0x890) #define IWM_CSR_MSIX_PENDING_PBA_AD (IWM_CSR_MSIX_BASE + 0x1000) #define IWM_CSR_MSIX_RX_IVAR(cause) (IWM_CSR_MSIX_RX_IVAR_AD_REG + (cause)) #define IWM_CSR_MSIX_IVAR(cause) (IWM_CSR_MSIX_IVAR_AD_REG + (cause)) /* * Causes for the FH register interrupts */ enum msix_fh_int_causes { IWM_MSIX_FH_INT_CAUSES_Q0 = (1 << 0), IWM_MSIX_FH_INT_CAUSES_Q1 = (1 << 1), IWM_MSIX_FH_INT_CAUSES_D2S_CH0_NUM = (1 << 16), IWM_MSIX_FH_INT_CAUSES_D2S_CH1_NUM = (1 << 17), IWM_MSIX_FH_INT_CAUSES_S2D = (1 << 19), IWM_MSIX_FH_INT_CAUSES_FH_ERR = (1 << 21), }; /* * END iwl-csr.h */ /* * BEGIN iwl-fw.h */ /* * Causes for the HW register interrupts */ enum msix_hw_int_causes { IWM_MSIX_HW_INT_CAUSES_REG_ALIVE = (1 << 0), IWM_MSIX_HW_INT_CAUSES_REG_WAKEUP = (1 << 1), IWM_MSIX_HW_INT_CAUSES_REG_IPC = (1 << 1), IWM_MSIX_HW_INT_CAUSES_REG_IML = (1 << 2), IWM_MSIX_HW_INT_CAUSES_REG_SW_ERR_V2 = (1 << 5), IWM_MSIX_HW_INT_CAUSES_REG_CT_KILL = (1 << 6), IWM_MSIX_HW_INT_CAUSES_REG_RF_KILL = (1 << 7), IWM_MSIX_HW_INT_CAUSES_REG_PERIODIC = (1 << 8), IWM_MSIX_HW_INT_CAUSES_REG_SW_ERR = (1 << 25), IWM_MSIX_HW_INT_CAUSES_REG_SCD = (1 << 26), IWM_MSIX_HW_INT_CAUSES_REG_FH_TX = (1 << 27), IWM_MSIX_HW_INT_CAUSES_REG_HW_ERR = (1 << 29), IWM_MSIX_HW_INT_CAUSES_REG_HAP = (1 << 30), }; /* * Registers to map causes to vectors */ enum msix_ivar_for_cause { IWM_MSIX_IVAR_CAUSE_D2S_CH0_NUM = 0x0, IWM_MSIX_IVAR_CAUSE_D2S_CH1_NUM = 0x1, IWM_MSIX_IVAR_CAUSE_S2D = 0x3, IWM_MSIX_IVAR_CAUSE_FH_ERR = 0x5, IWM_MSIX_IVAR_CAUSE_REG_ALIVE = 0x10, IWM_MSIX_IVAR_CAUSE_REG_WAKEUP = 0x11, IWM_MSIX_IVAR_CAUSE_REG_IML = 0x12, IWM_MSIX_IVAR_CAUSE_REG_CT_KILL = 0x16, IWM_MSIX_IVAR_CAUSE_REG_RF_KILL = 0x17, IWM_MSIX_IVAR_CAUSE_REG_PERIODIC = 0x18, IWM_MSIX_IVAR_CAUSE_REG_SW_ERR = 0x29, IWM_MSIX_IVAR_CAUSE_REG_SCD = 0x2a, IWM_MSIX_IVAR_CAUSE_REG_FH_TX = 0x2b, IWM_MSIX_IVAR_CAUSE_REG_HW_ERR = 0x2d, IWM_MSIX_IVAR_CAUSE_REG_HAP = 0x2e, }; #define IWM_MSIX_AUTO_CLEAR_CAUSE (0 << 7) #define IWM_MSIX_NON_AUTO_CLEAR_CAUSE (1 << 7) /** * uCode API flags * @IWM_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously * was a separate TLV but moved here to save space. * @IWM_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behaviour on hidden SSID, * treats good CRC threshold as a boolean * @IWM_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w). * @IWM_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P. * @IWM_UCODE_TLV_FLAGS_DW_BC_TABLE: The SCD byte count table is in DWORDS * @IWM_UCODE_TLV_FLAGS_UAPSD: This uCode image supports uAPSD * @IWM_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan * offload profile config command. * @IWM_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six * (rather than two) IPv6 addresses * @IWM_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element * from the probe request template. * @IWM_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version) * @IWM_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version) * @IWM_UCODE_TLV_FLAGS_P2P_PS: P2P client power save is supported (only on a * single bound interface). * @IWM_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD * @IWM_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS. * @IWM_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save * @IWM_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering. * @IWM_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients * */ #define IWM_UCODE_TLV_FLAGS_PAN (1 << 0) #define IWM_UCODE_TLV_FLAGS_NEWSCAN (1 << 1) #define IWM_UCODE_TLV_FLAGS_MFP (1 << 2) #define IWM_UCODE_TLV_FLAGS_P2P (1 << 3) #define IWM_UCODE_TLV_FLAGS_DW_BC_TABLE (1 << 4) #define IWM_UCODE_TLV_FLAGS_SHORT_BL (1 << 7) #define IWM_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS (1 << 10) #define IWM_UCODE_TLV_FLAGS_NO_BASIC_SSID (1 << 12) #define IWM_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL (1 << 15) #define IWM_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE (1 << 16) #define IWM_UCODE_TLV_FLAGS_P2P_PS (1 << 21) #define IWM_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM (1 << 22) #define IWM_UCODE_TLV_FLAGS_BSS_P2P_PS_SCM (1 << 23) #define IWM_UCODE_TLV_FLAGS_UAPSD_SUPPORT (1 << 24) #define IWM_UCODE_TLV_FLAGS_EBS_SUPPORT (1 << 25) #define IWM_UCODE_TLV_FLAGS_P2P_PS_UAPSD (1 << 26) #define IWM_UCODE_TLV_FLAGS_BCAST_FILTERING (1 << 29) #define IWM_UCODE_TLV_FLAGS_GO_UAPSD (1 << 30) #define IWM_UCODE_TLV_FLAGS_LTE_COEX (1U << 31) #define IWM_UCODE_TLV_FLAG_BITS \ "\020\1PAN\2NEWSCAN\3MFP\4P2P\5DW_BC_TABLE\6NEWBT_COEX\7PM_CMD\10SHORT_BL\11RX_ENERGY\12TIME_EVENT_V2\13D3_6_IPV6\14BF_UPDATED\15NO_BASIC_SSID\17D3_CONTINUITY\20NEW_NSOFFL_S\21NEW_NSOFFL_L\22SCHED_SCAN\24STA_KEY_CMD\25DEVICE_PS_CMD\26P2P_PS\27P2P_PS_DCM\30P2P_PS_SCM\31UAPSD_SUPPORT\32EBS\33P2P_PS_UAPSD\36BCAST_FILTERING\37GO_UAPSD\40LTE_COEX" /** * uCode TLV api * @IWM_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time * longer than the passive one, which is essential for fragmented scan. * @IWM_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source. * @IWM_UCODE_TLV_API_WIDE_CMD_HDR: ucode supports wide command header * @IWM_UCODE_TLV_API_LQ_SS_PARAMS: Configure STBC/BFER via LQ CMD ss_params * @IWM_UCODE_TLV_API_NEW_VERSION: new versioning format * @IWM_UCODE_TLV_API_TX_POWER_CHAIN: TX power API has larger command size * (command version 3) that supports per-chain limits * @IWM_UCODE_TLV_API_SCAN_TSF_REPORT: Scan start time reported in scan * iteration complete notification, and the timestamp reported for RX * received during scan, are reported in TSF of the mac specified in the * scan request. * @IWM_UCODE_TLV_API_TKIP_MIC_KEYS: This ucode supports version 2 of * ADD_MODIFY_STA_KEY_API_S_VER_2. * @IWM_UCODE_TLV_API_STA_TYPE: This ucode supports station type assignement. * @IWM_UCODE_TLV_API_EXT_SCAN_PRIORITY: scan APIs use 8-level priority * instead of 3. * @IWM_UCODE_TLV_API_NEW_RX_STATS: should new RX STATISTICS API be used * * @IWM_NUM_UCODE_TLV_API: number of bits used */ #define IWM_UCODE_TLV_API_FRAGMENTED_SCAN 8 #define IWM_UCODE_TLV_API_WIFI_MCC_UPDATE 9 #define IWM_UCODE_TLV_API_WIDE_CMD_HDR 14 #define IWM_UCODE_TLV_API_LQ_SS_PARAMS 18 #define IWM_UCODE_TLV_API_NEW_VERSION 20 #define IWM_UCODE_TLV_API_EXT_SCAN_PRIORITY 24 #define IWM_UCODE_TLV_API_TX_POWER_CHAIN 27 #define IWM_UCODE_TLV_API_SCAN_TSF_REPORT 28 #define IWM_UCODE_TLV_API_TKIP_MIC_KEYS 29 #define IWM_UCODE_TLV_API_STA_TYPE 30 #define IWM_UCODE_TLV_API_NAN2_VER2 31 #define IWM_UCODE_TLV_API_ADAPTIVE_DWELL 32 #define IWM_UCODE_TLV_API_NEW_RX_STATS 35 #define IWM_UCODE_TLV_API_QUOTA_LOW_LATENCY 38 #define IWM_UCODE_TLV_API_ADAPTIVE_DWELL_V2 42 #define IWM_UCODE_TLV_API_SCAN_EXT_CHAN_VER 58 #define IWM_NUM_UCODE_TLV_API 128 #define IWM_UCODE_TLV_API_BITS \ "\020\10FRAGMENTED_SCAN\11WIFI_MCC_UPDATE\16WIDE_CMD_HDR\22LQ_SS_PARAMS\30EXT_SCAN_PRIO\33TX_POWER_CHAIN\35TKIP_MIC_KEYS" /** * uCode capabilities * @IWM_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3 * @IWM_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory * @IWM_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan. * @IWM_UCODE_TLV_CAPA_BEAMFORMER: supports Beamformer * @IWM_UCODE_TLV_CAPA_TOF_SUPPORT: supports Time of Flight (802.11mc FTM) * @IWM_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality * @IWM_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current * tx power value into TPC Report action frame and Link Measurement Report * action frame * @IWM_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current * channel in DS parameter set element in probe requests. * @IWM_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in * probe requests. * @IWM_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests * @IWM_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA), * which also implies support for the scheduler configuration command * @IWM_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching * @IWM_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG: Consolidated D3-D0 image * @IWM_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command * @IWM_UCODE_TLV_CAPA_DC2DC_SUPPORT: supports DC2DC Command * @IWM_UCODE_TLV_CAPA_2G_COEX_SUPPORT: supports 2G coex Command * @IWM_UCODE_TLV_CAPA_CSUM_SUPPORT: supports TCP Checksum Offload * @IWM_UCODE_TLV_CAPA_RADIO_BEACON_STATS: support radio and beacon statistics * @IWM_UCODE_TLV_CAPA_P2P_STANDALONE_UAPSD: support p2p standalone U-APSD * @IWM_UCODE_TLV_CAPA_BT_COEX_PLCR: enabled BT Coex packet level co-running * @IWM_UCODE_TLV_CAPA_LAR_MULTI_MCC: ucode supports LAR updates with different * sources for the MCC. This TLV bit is a future replacement to * IWM_UCODE_TLV_API_WIFI_MCC_UPDATE. When either is set, multi-source LAR * is supported. * @IWM_UCODE_TLV_CAPA_BT_COEX_RRC: supports BT Coex RRC * @IWM_UCODE_TLV_CAPA_GSCAN_SUPPORT: supports gscan * @IWM_UCODE_TLV_CAPA_NAN_SUPPORT: supports NAN * @IWM_UCODE_TLV_CAPA_UMAC_UPLOAD: supports upload mode in umac (1=supported, * 0=no support) * @IWM_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE: extended DTS measurement * @IWM_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS: supports short PM timeouts * @IWM_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT: supports bt-coex Multi-priority LUT * @IWM_UCODE_TLV_CAPA_BEACON_ANT_SELECTION: firmware will decide on what * antenna the beacon should be transmitted * @IWM_UCODE_TLV_CAPA_BEACON_STORING: firmware will store the latest beacon * from AP and will send it upon d0i3 exit. * @IWM_UCODE_TLV_CAPA_LAR_SUPPORT_V2: support LAR API V2 * @IWM_UCODE_TLV_CAPA_CT_KILL_BY_FW: firmware responsible for CT-kill * @IWM_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT: supports temperature * thresholds reporting * @IWM_UCODE_TLV_CAPA_CTDP_SUPPORT: supports cTDP command * @IWM_UCODE_TLV_CAPA_USNIFFER_UNIFIED: supports usniffer enabled in * regular image. * @IWM_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG: support getting more shared * memory addresses from the firmware. * @IWM_UCODE_TLV_CAPA_LQM_SUPPORT: supports Link Quality Measurement * @IWM_UCODE_TLV_CAPA_LMAC_UPLOAD: supports upload mode in lmac (1=supported, * 0=no support) * * @IWM_NUM_UCODE_TLV_CAPA: number of bits used */ #define IWM_UCODE_TLV_CAPA_D0I3_SUPPORT 0 #define IWM_UCODE_TLV_CAPA_LAR_SUPPORT 1 #define IWM_UCODE_TLV_CAPA_UMAC_SCAN 2 #define IWM_UCODE_TLV_CAPA_BEAMFORMER 3 #define IWM_UCODE_TLV_CAPA_TOF_SUPPORT 5 #define IWM_UCODE_TLV_CAPA_TDLS_SUPPORT 6 #define IWM_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT 8 #define IWM_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT 9 #define IWM_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT 10 #define IWM_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT 11 #define IWM_UCODE_TLV_CAPA_DQA_SUPPORT 12 #define IWM_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH 13 #define IWM_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG 17 #define IWM_UCODE_TLV_CAPA_HOTSPOT_SUPPORT 18 #define IWM_UCODE_TLV_CAPA_DC2DC_CONFIG_SUPPORT 19 #define IWM_UCODE_TLV_CAPA_2G_COEX_SUPPORT 20 #define IWM_UCODE_TLV_CAPA_CSUM_SUPPORT 21 #define IWM_UCODE_TLV_CAPA_RADIO_BEACON_STATS 22 #define IWM_UCODE_TLV_CAPA_P2P_STANDALONE_UAPSD 26 #define IWM_UCODE_TLV_CAPA_BT_COEX_PLCR 28 #define IWM_UCODE_TLV_CAPA_LAR_MULTI_MCC 29 #define IWM_UCODE_TLV_CAPA_BT_COEX_RRC 30 #define IWM_UCODE_TLV_CAPA_GSCAN_SUPPORT 31 #define IWM_UCODE_TLV_CAPA_NAN_SUPPORT 34 #define IWM_UCODE_TLV_CAPA_UMAC_UPLOAD 35 #define IWM_UCODE_TLV_CAPA_SOC_LATENCY_SUPPORT 37 #define IWM_UCODE_TLV_CAPA_BINDING_CDB_SUPPORT 39 #define IWM_UCODE_TLV_CAPA_CDB_SUPPORT 40 #define IWM_UCODE_TLV_CAPA_DYNAMIC_QUOTA 44 #define IWM_UCODE_TLV_CAPA_ULTRA_HB_CHANNELS 48 #define IWM_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE 64 #define IWM_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS 65 #define IWM_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT 67 #define IWM_UCODE_TLV_CAPA_MULTI_QUEUE_RX_SUPPORT 68 #define IWM_UCODE_TLV_CAPA_BEACON_ANT_SELECTION 71 #define IWM_UCODE_TLV_CAPA_BEACON_STORING 72 #define IWM_UCODE_TLV_CAPA_LAR_SUPPORT_V2 73 #define IWM_UCODE_TLV_CAPA_CT_KILL_BY_FW 74 #define IWM_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT 75 #define IWM_UCODE_TLV_CAPA_CTDP_SUPPORT 76 #define IWM_UCODE_TLV_CAPA_USNIFFER_UNIFIED 77 #define IWM_UCODE_TLV_CAPA_LMAC_UPLOAD 79 #define IWM_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG 80 #define IWM_UCODE_TLV_CAPA_LQM_SUPPORT 81 #define IWM_NUM_UCODE_TLV_CAPA 128 /* The default calibrate table size if not specified by firmware file */ #define IWM_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18 #define IWM_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE 19 #define IWM_MAX_PHY_CALIBRATE_TBL_SIZE 253 /* The default max probe length if not specified by the firmware file */ #define IWM_DEFAULT_MAX_PROBE_LENGTH 200 /* * For 16.0 uCode and above, there is no differentiation between sections, * just an offset to the HW address. */ #define IWM_CPU1_CPU2_SEPARATOR_SECTION 0xFFFFCCCC #define IWM_PAGING_SEPARATOR_SECTION 0xAAAABBBB /* uCode version contains 4 values: Major/Minor/API/Serial */ #define IWM_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24) #define IWM_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16) #define IWM_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8) #define IWM_UCODE_SERIAL(ver) ((ver) & 0x000000FF) /* * Calibration control struct. * Sent as part of the phy configuration command. * @flow_trigger: bitmap for which calibrations to perform according to * flow triggers. * @event_trigger: bitmap for which calibrations to perform according to * event triggers. */ struct iwm_tlv_calib_ctrl { uint32_t flow_trigger; uint32_t event_trigger; } __packed; #define IWM_FW_PHY_CFG_RADIO_TYPE_POS 0 #define IWM_FW_PHY_CFG_RADIO_TYPE (0x3 << IWM_FW_PHY_CFG_RADIO_TYPE_POS) #define IWM_FW_PHY_CFG_RADIO_STEP_POS 2 #define IWM_FW_PHY_CFG_RADIO_STEP (0x3 << IWM_FW_PHY_CFG_RADIO_STEP_POS) #define IWM_FW_PHY_CFG_RADIO_DASH_POS 4 #define IWM_FW_PHY_CFG_RADIO_DASH (0x3 << IWM_FW_PHY_CFG_RADIO_DASH_POS) #define IWM_FW_PHY_CFG_TX_CHAIN_POS 16 #define IWM_FW_PHY_CFG_TX_CHAIN (0xf << IWM_FW_PHY_CFG_TX_CHAIN_POS) #define IWM_FW_PHY_CFG_RX_CHAIN_POS 20 #define IWM_FW_PHY_CFG_RX_CHAIN (0xf << IWM_FW_PHY_CFG_RX_CHAIN_POS) #define IWM_UCODE_MAX_CS 1 /** * struct iwm_fw_cipher_scheme - a cipher scheme supported by FW. * @cipher: a cipher suite selector * @flags: cipher scheme flags (currently reserved for a future use) * @hdr_len: a size of MPDU security header * @pn_len: a size of PN * @pn_off: an offset of pn from the beginning of the security header * @key_idx_off: an offset of key index byte in the security header * @key_idx_mask: a bit mask of key_idx bits * @key_idx_shift: bit shift needed to get key_idx * @mic_len: mic length in bytes * @hw_cipher: a HW cipher index used in host commands */ struct iwm_fw_cipher_scheme { uint32_t cipher; uint8_t flags; uint8_t hdr_len; uint8_t pn_len; uint8_t pn_off; uint8_t key_idx_off; uint8_t key_idx_mask; uint8_t key_idx_shift; uint8_t mic_len; uint8_t hw_cipher; } __packed; /** * struct iwm_fw_cscheme_list - a cipher scheme list * @size: a number of entries * @cs: cipher scheme entries */ struct iwm_fw_cscheme_list { uint8_t size; struct iwm_fw_cipher_scheme cs[]; } __packed; /* * END iwl-fw.h */ /* * BEGIN iwl-fw-file.h */ /* v1/v2 uCode file layout */ struct iwm_ucode_header { uint32_t ver; /* major/minor/API/serial */ union { struct { uint32_t inst_size; /* bytes of runtime code */ uint32_t data_size; /* bytes of runtime data */ uint32_t init_size; /* bytes of init code */ uint32_t init_data_size; /* bytes of init data */ uint32_t boot_size; /* bytes of bootstrap code */ uint8_t data[0]; /* in same order as sizes */ } v1; struct { uint32_t build; /* build number */ uint32_t inst_size; /* bytes of runtime code */ uint32_t data_size; /* bytes of runtime data */ uint32_t init_size; /* bytes of init code */ uint32_t init_data_size; /* bytes of init data */ uint32_t boot_size; /* bytes of bootstrap code */ uint8_t data[0]; /* in same order as sizes */ } v2; } u; }; /* * new TLV uCode file layout * * The new TLV file format contains TLVs, that each specify * some piece of data. */ enum iwm_ucode_tlv_type { IWM_UCODE_TLV_INVALID = 0, /* unused */ IWM_UCODE_TLV_INST = 1, IWM_UCODE_TLV_DATA = 2, IWM_UCODE_TLV_INIT = 3, IWM_UCODE_TLV_INIT_DATA = 4, IWM_UCODE_TLV_BOOT = 5, IWM_UCODE_TLV_PROBE_MAX_LEN = 6, /* a uint32_t value */ IWM_UCODE_TLV_PAN = 7, IWM_UCODE_TLV_RUNT_EVTLOG_PTR = 8, IWM_UCODE_TLV_RUNT_EVTLOG_SIZE = 9, IWM_UCODE_TLV_RUNT_ERRLOG_PTR = 10, IWM_UCODE_TLV_INIT_EVTLOG_PTR = 11, IWM_UCODE_TLV_INIT_EVTLOG_SIZE = 12, IWM_UCODE_TLV_INIT_ERRLOG_PTR = 13, IWM_UCODE_TLV_ENHANCE_SENS_TBL = 14, IWM_UCODE_TLV_PHY_CALIBRATION_SIZE = 15, IWM_UCODE_TLV_WOWLAN_INST = 16, IWM_UCODE_TLV_WOWLAN_DATA = 17, IWM_UCODE_TLV_FLAGS = 18, IWM_UCODE_TLV_SEC_RT = 19, IWM_UCODE_TLV_SEC_INIT = 20, IWM_UCODE_TLV_SEC_WOWLAN = 21, IWM_UCODE_TLV_DEF_CALIB = 22, IWM_UCODE_TLV_PHY_SKU = 23, IWM_UCODE_TLV_SECURE_SEC_RT = 24, IWM_UCODE_TLV_SECURE_SEC_INIT = 25, IWM_UCODE_TLV_SECURE_SEC_WOWLAN = 26, IWM_UCODE_TLV_NUM_OF_CPU = 27, IWM_UCODE_TLV_CSCHEME = 28, /* * Following two are not in our base tag, but allow * handling ucode version 9. */ IWM_UCODE_TLV_API_CHANGES_SET = 29, IWM_UCODE_TLV_ENABLED_CAPABILITIES = 30, IWM_UCODE_TLV_N_SCAN_CHANNELS = 31, IWM_UCODE_TLV_PAGING = 32, IWM_UCODE_TLV_SEC_RT_USNIFFER = 34, IWM_UCODE_TLV_SDIO_ADMA_ADDR = 35, IWM_UCODE_TLV_FW_VERSION = 36, IWM_UCODE_TLV_FW_DBG_DEST = 38, IWM_UCODE_TLV_FW_DBG_CONF = 39, IWM_UCODE_TLV_FW_DBG_TRIGGER = 40, IWM_UCODE_TLV_CMD_VERSIONS = 48, IWM_UCODE_TLV_FW_GSCAN_CAPA = 50, IWM_UCODE_TLV_FW_MEM_SEG = 51, IWM_UCODE_TLV_UMAC_DEBUG_ADDRS = 54, IWM_UCODE_TLV_LMAC_DEBUG_ADDRS = 55, IWM_UCODE_TLV_HW_TYPE = 58, }; #define IWM_UCODE_TLV_DEBUG_BASE 0x1000005 #define IWM_UCODE_TLV_TYPE_DEBUG_INFO (IWM_UCODE_TLV_DEBUG_BASE + 0) #define IWM_UCODE_TLV_TYPE_BUFFER_ALLOCATION (IWM_UCODE_TLV_DEBUG_BASE + 1) #define IWM_UCODE_TLV_TYPE_HCMD (IWM_UCODE_TLV_DEBUG_BASE + 2) #define IWM_UCODE_TLV_TYPE_REGIONS (IWM_UCODE_TLV_DEBUG_BASE + 3) #define IWM_UCODE_TLV_TYPE_TRIGGERS (IWM_UCODE_TLV_DEBUG_BASE + 4) #define IWM_UCODE_TLV_DEBUG_MAX IWM_UCODE_TLV_TYPE_TRIGGERS struct iwm_ucode_tlv { uint32_t type; /* see above */ uint32_t length; /* not including type/length fields */ uint8_t data[0]; }; struct iwm_ucode_api { uint32_t api_index; uint32_t api_flags; } __packed; struct iwm_ucode_capa { uint32_t api_index; uint32_t api_capa; } __packed; #define IWM_TLV_UCODE_MAGIC 0x0a4c5749 struct iwm_tlv_ucode_header { /* * The TLV style ucode header is distinguished from * the v1/v2 style header by first four bytes being * zero, as such is an invalid combination of * major/minor/API/serial versions. */ uint32_t zero; uint32_t magic; uint8_t human_readable[64]; uint32_t ver; /* major/minor/API/serial */ uint32_t build; uint64_t ignore; /* * The data contained herein has a TLV layout, * see above for the TLV header and types. * Note that each TLV is padded to a length * that is a multiple of 4 for alignment. */ uint8_t data[0]; }; /* * END iwl-fw-file.h */ /* * BEGIN iwl-prph.h */ /* * Registers in this file are internal, not PCI bus memory mapped. * Driver accesses these via IWM_HBUS_TARG_PRPH_* registers. */ #define IWM_PRPH_BASE (0x00000) #define IWM_PRPH_END (0xFFFFF) /* APMG (power management) constants */ #define IWM_APMG_BASE (IWM_PRPH_BASE + 0x3000) #define IWM_APMG_CLK_CTRL_REG (IWM_APMG_BASE + 0x0000) #define IWM_APMG_CLK_EN_REG (IWM_APMG_BASE + 0x0004) #define IWM_APMG_CLK_DIS_REG (IWM_APMG_BASE + 0x0008) #define IWM_APMG_PS_CTRL_REG (IWM_APMG_BASE + 0x000c) #define IWM_APMG_PCIDEV_STT_REG (IWM_APMG_BASE + 0x0010) #define IWM_APMG_RFKILL_REG (IWM_APMG_BASE + 0x0014) #define IWM_APMG_RTC_INT_STT_REG (IWM_APMG_BASE + 0x001c) #define IWM_APMG_RTC_INT_MSK_REG (IWM_APMG_BASE + 0x0020) #define IWM_APMG_DIGITAL_SVR_REG (IWM_APMG_BASE + 0x0058) #define IWM_APMG_ANALOG_SVR_REG (IWM_APMG_BASE + 0x006C) #define IWM_APMS_CLK_VAL_MRB_FUNC_MODE (0x00000001) #define IWM_APMG_CLK_VAL_DMA_CLK_RQT (0x00000200) #define IWM_APMG_CLK_VAL_BSM_CLK_RQT (0x00000800) #define IWM_APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS (0x00400000) #define IWM_APMG_PS_CTRL_VAL_RESET_REQ (0x04000000) #define IWM_APMG_PS_CTRL_MSK_PWR_SRC (0x03000000) #define IWM_APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000) #define IWM_APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x02000000) #define IWM_APMG_SVR_VOLTAGE_CONFIG_BIT_MSK (0x000001E0) /* bit 8:5 */ #define IWM_APMG_SVR_DIGITAL_VOLTAGE_1_32 (0x00000060) #define IWM_APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800) #define IWM_APMG_RTC_INT_STT_RFKILL (0x10000000) /* Device system time */ #define IWM_DEVICE_SYSTEM_TIME_REG 0xA0206C /* Device NMI register */ #define IWM_DEVICE_SET_NMI_REG 0x00a01c30 #define IWM_DEVICE_SET_NMI_VAL_HW 0x01 #define IWM_DEVICE_SET_NMI_VAL_DRV 0x80 #define IWM_DEVICE_SET_NMI_8000_REG 0x00a01c24 #define IWM_DEVICE_SET_NMI_8000_VAL 0x1000000 /* * Device reset for family 8000 * write to bit 24 in order to reset the CPU */ #define IWM_RELEASE_CPU_RESET 0x300c #define IWM_RELEASE_CPU_RESET_BIT 0x1000000 /***************************************************************************** * 7000/3000 series SHR DTS addresses * *****************************************************************************/ #define IWM_SHR_MISC_WFM_DTS_EN (0x00a10024) #define IWM_DTSC_CFG_MODE (0x00a10604) #define IWM_DTSC_VREF_AVG (0x00a10648) #define IWM_DTSC_VREF5_AVG (0x00a1064c) #define IWM_DTSC_CFG_MODE_PERIODIC (0x2) #define IWM_DTSC_PTAT_AVG (0x00a10650) /** * Tx Scheduler * * The Tx Scheduler selects the next frame to be transmitted, choosing TFDs * (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in * host DRAM. It steers each frame's Tx command (which contains the frame * data) into one of up to 7 prioritized Tx DMA FIFO channels within the * device. A queue maps to only one (selectable by driver) Tx DMA channel, * but one DMA channel may take input from several queues. * * Tx DMA FIFOs have dedicated purposes. * * For 5000 series and up, they are used differently * (cf. iwl5000_default_queue_to_tx_fifo in iwl-5000.c): * * 0 -- EDCA BK (background) frames, lowest priority * 1 -- EDCA BE (best effort) frames, normal priority * 2 -- EDCA VI (video) frames, higher priority * 3 -- EDCA VO (voice) and management frames, highest priority * 4 -- unused * 5 -- unused * 6 -- unused * 7 -- Commands * * Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6. * In addition, driver can map the remaining queues to Tx DMA/FIFO * channels 0-3 to support 11n aggregation via EDCA DMA channels. * * The driver sets up each queue to work in one of two modes: * * 1) Scheduler-Ack, in which the scheduler automatically supports a * block-ack (BA) window of up to 64 TFDs. In this mode, each queue * contains TFDs for a unique combination of Recipient Address (RA) * and Traffic Identifier (TID), that is, traffic of a given * Quality-Of-Service (QOS) priority, destined for a single station. * * In scheduler-ack mode, the scheduler keeps track of the Tx status of * each frame within the BA window, including whether it's been transmitted, * and whether it's been acknowledged by the receiving station. The device * automatically processes block-acks received from the receiving STA, * and reschedules un-acked frames to be retransmitted (successful * Tx completion may end up being out-of-order). * * The driver must maintain the queue's Byte Count table in host DRAM * for this mode. * This mode does not support fragmentation. * * 2) FIFO (a.k.a. non-Scheduler-ACK), in which each TFD is processed in order. * The device may automatically retry Tx, but will retry only one frame * at a time, until receiving ACK from receiving station, or reaching * retry limit and giving up. * * The command queue (#4/#9) must use this mode! * This mode does not require use of the Byte Count table in host DRAM. * * Driver controls scheduler operation via 3 means: * 1) Scheduler registers * 2) Shared scheduler data base in internal SRAM * 3) Shared data in host DRAM * * Initialization: * * When loading, driver should allocate memory for: * 1) 16 TFD circular buffers, each with space for (typically) 256 TFDs. * 2) 16 Byte Count circular buffers in 16 KBytes contiguous memory * (1024 bytes for each queue). * * After receiving "Alive" response from uCode, driver must initialize * the scheduler (especially for queue #4/#9, the command queue, otherwise * the driver can't issue commands!): */ #define IWM_SCD_MEM_LOWER_BOUND (0x0000) /** * Max Tx window size is the max number of contiguous TFDs that the scheduler * can keep track of at one time when creating block-ack chains of frames. * Note that "64" matches the number of ack bits in a block-ack packet. */ #define IWM_SCD_WIN_SIZE 64 #define IWM_SCD_FRAME_LIMIT 64 #define IWM_SCD_TXFIFO_POS_TID (0) #define IWM_SCD_TXFIFO_POS_RA (4) #define IWM_SCD_QUEUE_RA_TID_MAP_RATID_MSK (0x01FF) /* agn SCD */ #define IWM_SCD_QUEUE_STTS_REG_POS_TXF (0) #define IWM_SCD_QUEUE_STTS_REG_POS_ACTIVE (3) #define IWM_SCD_QUEUE_STTS_REG_POS_WSL (4) #define IWM_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (19) #define IWM_SCD_QUEUE_STTS_REG_MSK (0x017F0000) #define IWM_SCD_QUEUE_CTX_REG1_CREDIT_POS (8) #define IWM_SCD_QUEUE_CTX_REG1_CREDIT_MSK (0x00FFFF00) #define IWM_SCD_QUEUE_CTX_REG1_SUPER_CREDIT_POS (24) #define IWM_SCD_QUEUE_CTX_REG1_SUPER_CREDIT_MSK (0xFF000000) #define IWM_SCD_QUEUE_CTX_REG2_WIN_SIZE_POS (0) #define IWM_SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK (0x0000007F) #define IWM_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16) #define IWM_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000) #define IWM_SCD_GP_CTRL_ENABLE_31_QUEUES (1 << 0) #define IWM_SCD_GP_CTRL_AUTO_ACTIVE_MODE (1 << 18) /* Context Data */ #define IWM_SCD_CONTEXT_MEM_LOWER_BOUND (IWM_SCD_MEM_LOWER_BOUND + 0x600) #define IWM_SCD_CONTEXT_MEM_UPPER_BOUND (IWM_SCD_MEM_LOWER_BOUND + 0x6A0) /* Tx status */ #define IWM_SCD_TX_STTS_MEM_LOWER_BOUND (IWM_SCD_MEM_LOWER_BOUND + 0x6A0) #define IWM_SCD_TX_STTS_MEM_UPPER_BOUND (IWM_SCD_MEM_LOWER_BOUND + 0x7E0) /* Translation Data */ #define IWM_SCD_TRANS_TBL_MEM_LOWER_BOUND (IWM_SCD_MEM_LOWER_BOUND + 0x7E0) #define IWM_SCD_TRANS_TBL_MEM_UPPER_BOUND (IWM_SCD_MEM_LOWER_BOUND + 0x808) #define IWM_SCD_CONTEXT_QUEUE_OFFSET(x)\ (IWM_SCD_CONTEXT_MEM_LOWER_BOUND + ((x) * 8)) #define IWM_SCD_TX_STTS_QUEUE_OFFSET(x)\ (IWM_SCD_TX_STTS_MEM_LOWER_BOUND + ((x) * 16)) #define IWM_SCD_TRANS_TBL_OFFSET_QUEUE(x) \ ((IWM_SCD_TRANS_TBL_MEM_LOWER_BOUND + ((x) * 2)) & 0xfffc) #define IWM_SCD_BASE (IWM_PRPH_BASE + 0xa02c00) #define IWM_SCD_SRAM_BASE_ADDR (IWM_SCD_BASE + 0x0) #define IWM_SCD_DRAM_BASE_ADDR (IWM_SCD_BASE + 0x8) #define IWM_SCD_AIT (IWM_SCD_BASE + 0x0c) #define IWM_SCD_TXFACT (IWM_SCD_BASE + 0x10) #define IWM_SCD_ACTIVE (IWM_SCD_BASE + 0x14) #define IWM_SCD_QUEUECHAIN_SEL (IWM_SCD_BASE + 0xe8) #define IWM_SCD_CHAINEXT_EN (IWM_SCD_BASE + 0x244) #define IWM_SCD_AGGR_SEL (IWM_SCD_BASE + 0x248) #define IWM_SCD_INTERRUPT_MASK (IWM_SCD_BASE + 0x108) #define IWM_SCD_GP_CTRL (IWM_SCD_BASE + 0x1a8) #define IWM_SCD_EN_CTRL (IWM_SCD_BASE + 0x254) static inline unsigned int IWM_SCD_QUEUE_WRPTR(unsigned int chnl) { if (chnl < 20) return IWM_SCD_BASE + 0x18 + chnl * 4; return IWM_SCD_BASE + 0x284 + (chnl - 20) * 4; } static inline unsigned int IWM_SCD_QUEUE_RDPTR(unsigned int chnl) { if (chnl < 20) return IWM_SCD_BASE + 0x68 + chnl * 4; return IWM_SCD_BASE + 0x2B4 + chnl * 4; } static inline unsigned int IWM_SCD_QUEUE_STATUS_BITS(unsigned int chnl) { if (chnl < 20) return IWM_SCD_BASE + 0x10c + chnl * 4; return IWM_SCD_BASE + 0x334 + chnl * 4; } /*********************** END TX SCHEDULER *************************************/ /* Oscillator clock */ #define IWM_OSC_CLK (0xa04068) #define IWM_OSC_CLK_FORCE_CONTROL (0x8) /* * END iwl-prph.h */ /* * BEGIN iwl-fh.h */ /****************************/ /* Flow Handler Definitions */ /****************************/ /** * This I/O area is directly read/writable by driver (e.g. Linux uses writel()) * Addresses are offsets from device's PCI hardware base address. */ #define IWM_FH_MEM_LOWER_BOUND (0x1000) #define IWM_FH_MEM_UPPER_BOUND (0x2000) /** * Keep-Warm (KW) buffer base address. * * Driver must allocate a 4KByte buffer that is for keeping the * host DRAM powered on (via dummy accesses to DRAM) to maintain low-latency * DRAM access when doing Txing or Rxing. The dummy accesses prevent host * from going into a power-savings mode that would cause higher DRAM latency, * and possible data over/under-runs, before all Tx/Rx is complete. * * Driver loads IWM_FH_KW_MEM_ADDR_REG with the physical address (bits 35:4) * of the buffer, which must be 4K aligned. Once this is set up, the device * automatically invokes keep-warm accesses when normal accesses might not * be sufficient to maintain fast DRAM response. * * Bit fields: * 31-0: Keep-warm buffer physical base address [35:4], must be 4K aligned */ #define IWM_FH_KW_MEM_ADDR_REG (IWM_FH_MEM_LOWER_BOUND + 0x97C) /** * TFD Circular Buffers Base (CBBC) addresses * * Device has 16 base pointer registers, one for each of 16 host-DRAM-resident * circular buffers (CBs/queues) containing Transmit Frame Descriptors (TFDs) * (see struct iwm_tfd_frame). These 16 pointer registers are offset by 0x04 * bytes from one another. Each TFD circular buffer in DRAM must be 256-byte * aligned (address bits 0-7 must be 0). * Later devices have 20 (5000 series) or 30 (higher) queues, but the registers * for them are in different places. * * Bit fields in each pointer register: * 27-0: TFD CB physical base address [35:8], must be 256-byte aligned */ #define IWM_FH_MEM_CBBC_0_15_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0x9D0) #define IWM_FH_MEM_CBBC_0_15_UPPER_BOUN (IWM_FH_MEM_LOWER_BOUND + 0xA10) #define IWM_FH_MEM_CBBC_16_19_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xBF0) #define IWM_FH_MEM_CBBC_16_19_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xC00) #define IWM_FH_MEM_CBBC_20_31_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xB20) #define IWM_FH_MEM_CBBC_20_31_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xB80) /* Find TFD CB base pointer for given queue */ static inline unsigned int IWM_FH_MEM_CBBC_QUEUE(unsigned int chnl) { if (chnl < 16) return IWM_FH_MEM_CBBC_0_15_LOWER_BOUND + 4 * chnl; if (chnl < 20) return IWM_FH_MEM_CBBC_16_19_LOWER_BOUND + 4 * (chnl - 16); return IWM_FH_MEM_CBBC_20_31_LOWER_BOUND + 4 * (chnl - 20); } /** * Rx SRAM Control and Status Registers (RSCSR) * * These registers provide handshake between driver and device for the Rx queue * (this queue handles *all* command responses, notifications, Rx data, etc. * sent from uCode to host driver). Unlike Tx, there is only one Rx * queue, and only one Rx DMA/FIFO channel. Also unlike Tx, which can * concatenate up to 20 DRAM buffers to form a Tx frame, each Receive Buffer * Descriptor (RBD) points to only one Rx Buffer (RB); there is a 1:1 * mapping between RBDs and RBs. * * Driver must allocate host DRAM memory for the following, and set the * physical address of each into device registers: * * 1) Receive Buffer Descriptor (RBD) circular buffer (CB), typically with 256 * entries (although any power of 2, up to 4096, is selectable by driver). * Each entry (1 dword) points to a receive buffer (RB) of consistent size * (typically 4K, although 8K or 16K are also selectable by driver). * Driver sets up RB size and number of RBDs in the CB via Rx config * register IWM_FH_MEM_RCSR_CHNL0_CONFIG_REG. * * Bit fields within one RBD: * 27-0: Receive Buffer physical address bits [35:8], 256-byte aligned * * Driver sets physical address [35:8] of base of RBD circular buffer * into IWM_FH_RSCSR_CHNL0_RBDCB_BASE_REG [27:0]. * * 2) Rx status buffer, 8 bytes, in which uCode indicates which Rx Buffers * (RBs) have been filled, via a "write pointer", actually the index of * the RB's corresponding RBD within the circular buffer. Driver sets * physical address [35:4] into IWM_FH_RSCSR_CHNL0_STTS_WPTR_REG [31:0]. * * Bit fields in lower dword of Rx status buffer (upper dword not used * by driver: * 31-12: Not used by driver * 11- 0: Index of last filled Rx buffer descriptor * (device writes, driver reads this value) * * As the driver prepares Receive Buffers (RBs) for device to fill, driver must * enter pointers to these RBs into contiguous RBD circular buffer entries, * and update the device's "write" index register, * IWM_FH_RSCSR_CHNL0_RBDCB_WPTR_REG. * * This "write" index corresponds to the *next* RBD that the driver will make * available, i.e. one RBD past the tail of the ready-to-fill RBDs within * the circular buffer. This value should initially be 0 (before preparing any * RBs), should be 8 after preparing the first 8 RBs (for example), and must * wrap back to 0 at the end of the circular buffer (but don't wrap before * "read" index has advanced past 1! See below). * NOTE: DEVICE EXPECTS THE WRITE INDEX TO BE INCREMENTED IN MULTIPLES OF 8. * * As the device fills RBs (referenced from contiguous RBDs within the circular * buffer), it updates the Rx status buffer in host DRAM, 2) described above, * to tell the driver the index of the latest filled RBD. The driver must * read this "read" index from DRAM after receiving an Rx interrupt from device * * The driver must also internally keep track of a third index, which is the * next RBD to process. When receiving an Rx interrupt, driver should process * all filled but unprocessed RBs up to, but not including, the RB * corresponding to the "read" index. For example, if "read" index becomes "1", * driver may process the RB pointed to by RBD 0. Depending on volume of * traffic, there may be many RBs to process. * * If read index == write index, device thinks there is no room to put new data. * Due to this, the maximum number of filled RBs is 255, instead of 256. To * be safe, make sure that there is a gap of at least 2 RBDs between "write" * and "read" indexes; that is, make sure that there are no more than 254 * buffers waiting to be filled. */ #define IWM_FH_MEM_RSCSR_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xBC0) #define IWM_FH_MEM_RSCSR_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xC00) #define IWM_FH_MEM_RSCSR_CHNL0 (IWM_FH_MEM_RSCSR_LOWER_BOUND) /** * Physical base address of 8-byte Rx Status buffer. * Bit fields: * 31-0: Rx status buffer physical base address [35:4], must 16-byte aligned. */ #define IWM_FH_RSCSR_CHNL0_STTS_WPTR_REG (IWM_FH_MEM_RSCSR_CHNL0) /** * Physical base address of Rx Buffer Descriptor Circular Buffer. * Bit fields: * 27-0: RBD CD physical base address [35:8], must be 256-byte aligned. */ #define IWM_FH_RSCSR_CHNL0_RBDCB_BASE_REG (IWM_FH_MEM_RSCSR_CHNL0 + 0x004) /** * Rx write pointer (index, really!). * Bit fields: * 11-0: Index of driver's most recent prepared-to-be-filled RBD, + 1. * NOTE: For 256-entry circular buffer, use only bits [7:0]. */ #define IWM_FH_RSCSR_CHNL0_RBDCB_WPTR_REG (IWM_FH_MEM_RSCSR_CHNL0 + 0x008) #define IWM_FH_RSCSR_CHNL0_WPTR (IWM_FH_RSCSR_CHNL0_RBDCB_WPTR_REG) #define IWM_FW_RSCSR_CHNL0_RXDCB_RDPTR_REG (IWM_FH_MEM_RSCSR_CHNL0 + 0x00c) #define IWM_FH_RSCSR_CHNL0_RDPTR IWM_FW_RSCSR_CHNL0_RXDCB_RDPTR_REG /** * Rx Config/Status Registers (RCSR) * Rx Config Reg for channel 0 (only channel used) * * Driver must initialize IWM_FH_MEM_RCSR_CHNL0_CONFIG_REG as follows for * normal operation (see bit fields). * * Clearing IWM_FH_MEM_RCSR_CHNL0_CONFIG_REG to 0 turns off Rx DMA. * Driver should poll IWM_FH_MEM_RSSR_RX_STATUS_REG for * IWM_FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (bit 24) before continuing. * * Bit fields: * 31-30: Rx DMA channel enable: '00' off/pause, '01' pause at end of frame, * '10' operate normally * 29-24: reserved * 23-20: # RBDs in circular buffer = 2^value; use "8" for 256 RBDs (normal), * min "5" for 32 RBDs, max "12" for 4096 RBDs. * 19-18: reserved * 17-16: size of each receive buffer; '00' 4K (normal), '01' 8K, * '10' 12K, '11' 16K. * 15-14: reserved * 13-12: IRQ destination; '00' none, '01' host driver (normal operation) * 11- 4: timeout for closing Rx buffer and interrupting host (units 32 usec) * typical value 0x10 (about 1/2 msec) * 3- 0: reserved */ #define IWM_FH_MEM_RCSR_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xC00) #define IWM_FH_MEM_RCSR_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xCC0) #define IWM_FH_MEM_RCSR_CHNL0 (IWM_FH_MEM_RCSR_LOWER_BOUND) #define IWM_FH_MEM_RCSR_CHNL0_CONFIG_REG (IWM_FH_MEM_RCSR_CHNL0) #define IWM_FH_MEM_RCSR_CHNL0_RBDCB_WPTR (IWM_FH_MEM_RCSR_CHNL0 + 0x8) #define IWM_FH_MEM_RCSR_CHNL0_FLUSH_RB_REQ (IWM_FH_MEM_RCSR_CHNL0 + 0x10) #define IWM_FH_RCSR_CHNL0_RX_CONFIG_RB_TIMEOUT_MSK (0x00000FF0) /* bits 4-11 */ #define IWM_FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_MSK (0x00001000) /* bits 12 */ #define IWM_FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK (0x00008000) /* bit 15 */ #define IWM_FH_RCSR_CHNL0_RX_CONFIG_RB_SIZE_MSK (0x00030000) /* bits 16-17 */ #define IWM_FH_RCSR_CHNL0_RX_CONFIG_RBDBC_SIZE_MSK (0x00F00000) /* bits 20-23 */ #define IWM_FH_RCSR_CHNL0_RX_CONFIG_DMA_CHNL_EN_MSK (0xC0000000) /* bits 30-31*/ #define IWM_FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS (20) #define IWM_FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS (4) #define IWM_RX_RB_TIMEOUT (0x11) #define IWM_FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_VAL (0x00000000) #define IWM_FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_EOF_VAL (0x40000000) #define IWM_FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL (0x80000000) #define IWM_FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K (0x00000000) #define IWM_FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K (0x00010000) #define IWM_FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_12K (0x00020000) #define IWM_FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_16K (0x00030000) #define IWM_FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY (0x00000004) #define IWM_FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL (0x00000000) #define IWM_FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL (0x00001000) /** * Rx Shared Status Registers (RSSR) * * After stopping Rx DMA channel (writing 0 to * IWM_FH_MEM_RCSR_CHNL0_CONFIG_REG), driver must poll * IWM_FH_MEM_RSSR_RX_STATUS_REG until Rx channel is idle. * * Bit fields: * 24: 1 = Channel 0 is idle * * IWM_FH_MEM_RSSR_SHARED_CTRL_REG and IWM_FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV * contain default values that should not be altered by the driver. */ #define IWM_FH_MEM_RSSR_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xC40) #define IWM_FH_MEM_RSSR_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xD00) #define IWM_FH_MEM_RSSR_SHARED_CTRL_REG (IWM_FH_MEM_RSSR_LOWER_BOUND) #define IWM_FH_MEM_RSSR_RX_STATUS_REG (IWM_FH_MEM_RSSR_LOWER_BOUND + 0x004) #define IWM_FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV\ (IWM_FH_MEM_RSSR_LOWER_BOUND + 0x008) #define IWM_FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000) #define IWM_FH_MEM_TFDIB_REG1_ADDR_BITSHIFT 28 /* TFDB Area - TFDs buffer table */ #define IWM_FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK (0xFFFFFFFF) #define IWM_FH_TFDIB_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0x900) #define IWM_FH_TFDIB_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0x958) #define IWM_FH_TFDIB_CTRL0_REG(_chnl) (IWM_FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl)) #define IWM_FH_TFDIB_CTRL1_REG(_chnl) (IWM_FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl) + 0x4) /** * Transmit DMA Channel Control/Status Registers (TCSR) * * Device has one configuration register for each of 8 Tx DMA/FIFO channels * supported in hardware (don't confuse these with the 16 Tx queues in DRAM, * which feed the DMA/FIFO channels); config regs are separated by 0x20 bytes. * * To use a Tx DMA channel, driver must initialize its * IWM_FH_TCSR_CHNL_TX_CONFIG_REG(chnl) with: * * IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | * IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL * * All other bits should be 0. * * Bit fields: * 31-30: Tx DMA channel enable: '00' off/pause, '01' pause at end of frame, * '10' operate normally * 29- 4: Reserved, set to "0" * 3: Enable internal DMA requests (1, normal operation), disable (0) * 2- 0: Reserved, set to "0" */ #define IWM_FH_TCSR_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xD00) #define IWM_FH_TCSR_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xE60) /* Find Control/Status reg for given Tx DMA/FIFO channel */ #define IWM_FH_TCSR_CHNL_NUM (8) /* TCSR: tx_config register values */ #define IWM_FH_TCSR_CHNL_TX_CONFIG_REG(_chnl) \ (IWM_FH_TCSR_LOWER_BOUND + 0x20 * (_chnl)) #define IWM_FH_TCSR_CHNL_TX_CREDIT_REG(_chnl) \ (IWM_FH_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x4) #define IWM_FH_TCSR_CHNL_TX_BUF_STS_REG(_chnl) \ (IWM_FH_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x8) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF (0x00000000) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_DRV (0x00000001) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE (0x00000000) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE (0x00000008) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_NOINT (0x00000000) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD (0x00100000) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD (0x00200000) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT (0x00000000) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_ENDTFD (0x00400000) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_IFTFD (0x00800000) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE (0x00000000) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE_EOF (0x40000000) #define IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE (0x80000000) #define IWM_FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_EMPTY (0x00000000) #define IWM_FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_WAIT (0x00002000) #define IWM_FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID (0x00000003) #define IWM_FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM (20) #define IWM_FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_IDX (12) /** * Tx Shared Status Registers (TSSR) * * After stopping Tx DMA channel (writing 0 to * IWM_FH_TCSR_CHNL_TX_CONFIG_REG(chnl)), driver must poll * IWM_FH_TSSR_TX_STATUS_REG until selected Tx channel is idle * (channel's buffers empty | no pending requests). * * Bit fields: * 31-24: 1 = Channel buffers empty (channel 7:0) * 23-16: 1 = No pending requests (channel 7:0) */ #define IWM_FH_TSSR_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xEA0) #define IWM_FH_TSSR_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xEC0) #define IWM_FH_TSSR_TX_STATUS_REG (IWM_FH_TSSR_LOWER_BOUND + 0x010) /** * Bit fields for TSSR(Tx Shared Status & Control) error status register: * 31: Indicates an address error when accessed to internal memory * uCode/driver must write "1" in order to clear this flag * 30: Indicates that Host did not send the expected number of dwords to FH * uCode/driver must write "1" in order to clear this flag * 16-9:Each status bit is for one channel. Indicates that an (Error) ActDMA * command was received from the scheduler while the TRB was already full * with previous command * uCode/driver must write "1" in order to clear this flag * 7-0: Each status bit indicates a channel's TxCredit error. When an error * bit is set, it indicates that the FH has received a full indication * from the RTC TxFIFO and the current value of the TxCredit counter was * not equal to zero. This mean that the credit mechanism was not * synchronized to the TxFIFO status * uCode/driver must write "1" in order to clear this flag */ #define IWM_FH_TSSR_TX_ERROR_REG (IWM_FH_TSSR_LOWER_BOUND + 0x018) #define IWM_FH_TSSR_TX_MSG_CONFIG_REG (IWM_FH_TSSR_LOWER_BOUND + 0x008) #define IWM_FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_chnl) ((1 << (_chnl)) << 16) /* Tx service channels */ #define IWM_FH_SRVC_CHNL (9) #define IWM_FH_SRVC_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0x9C8) #define IWM_FH_SRVC_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0x9D0) #define IWM_FH_SRVC_CHNL_SRAM_ADDR_REG(_chnl) \ (IWM_FH_SRVC_LOWER_BOUND + ((_chnl) - 9) * 0x4) #define IWM_FH_TX_CHICKEN_BITS_REG (IWM_FH_MEM_LOWER_BOUND + 0xE98) #define IWM_FH_TX_TRB_REG(_chan) (IWM_FH_MEM_LOWER_BOUND + 0x958 + \ (_chan) * 4) /* Instruct FH to increment the retry count of a packet when * it is brought from the memory to TX-FIFO */ #define IWM_FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN (0x00000002) #define IWM_RX_QUEUE_SIZE 256 #define IWM_RX_QUEUE_MASK 255 #define IWM_RX_QUEUE_SIZE_LOG 8 /* * RX related structures and functions */ #define IWM_RX_FREE_BUFFERS 64 #define IWM_RX_LOW_WATERMARK 8 /** * struct iwm_rb_status - reseve buffer status * host memory mapped FH registers * @closed_rb_num [0:11] - Indicates the index of the RB which was closed * @closed_fr_num [0:11] - Indicates the index of the RX Frame which was closed * @finished_rb_num [0:11] - Indicates the index of the current RB * in which the last frame was written to * @finished_fr_num [0:11] - Indicates the index of the RX Frame * which was transferred */ struct iwm_rb_status { uint16_t closed_rb_num; uint16_t closed_fr_num; uint16_t finished_rb_num; uint16_t finished_fr_nam; uint32_t unused; } __packed; #define IWM_TFD_QUEUE_SIZE_MAX (256) #define IWM_TFD_QUEUE_SIZE_BC_DUP (64) #define IWM_TFD_QUEUE_BC_SIZE (IWM_TFD_QUEUE_SIZE_MAX + \ IWM_TFD_QUEUE_SIZE_BC_DUP) #define IWM_TX_DMA_MASK DMA_BIT_MASK(36) #define IWM_NUM_OF_TBS 20 static inline uint8_t iwm_get_dma_hi_addr(bus_addr_t addr) { return (sizeof(addr) > sizeof(uint32_t) ? (addr >> 16) >> 16 : 0) & 0xF; } /** * struct iwm_tfd_tb transmit buffer descriptor within transmit frame descriptor * * This structure contains dma address and length of transmission address * * @lo: low [31:0] portion of the dma address of TX buffer * every even is unaligned on 16 bit boundary * @hi_n_len 0-3 [35:32] portion of dma * 4-15 length of the tx buffer */ struct iwm_tfd_tb { uint32_t lo; uint16_t hi_n_len; } __packed; /** * struct iwm_tfd * * Transmit Frame Descriptor (TFD) * * @ __reserved1[3] reserved * @ num_tbs 0-4 number of active tbs * 5 reserved * 6-7 padding (not used) * @ tbs[20] transmit frame buffer descriptors * @ __pad padding * * Each Tx queue uses a circular buffer of 256 TFDs stored in host DRAM. * Both driver and device share these circular buffers, each of which must be * contiguous 256 TFDs x 128 bytes-per-TFD = 32 KBytes * * Driver must indicate the physical address of the base of each * circular buffer via the IWM_FH_MEM_CBBC_QUEUE registers. * * Each TFD contains pointer/size information for up to 20 data buffers * in host DRAM. These buffers collectively contain the (one) frame described * by the TFD. Each buffer must be a single contiguous block of memory within * itself, but buffers may be scattered in host DRAM. Each buffer has max size * of (4K - 4). The concatenates all of a TFD's buffers into a single * Tx frame, up to 8 KBytes in size. * * A maximum of 255 (not 256!) TFDs may be on a queue waiting for Tx. */ struct iwm_tfd { uint8_t __reserved1[3]; uint8_t num_tbs; struct iwm_tfd_tb tbs[IWM_NUM_OF_TBS]; uint32_t __pad; } __packed; /* Keep Warm Size */ #define IWM_KW_SIZE 0x1000 /* 4k */ /* Fixed (non-configurable) rx data from phy */ /** * struct iwm_agn_schedq_bc_tbl scheduler byte count table * base physical address provided by IWM_SCD_DRAM_BASE_ADDR * @tfd_offset 0-12 - tx command byte count * 12-16 - station index */ struct iwm_agn_scd_bc_tbl { uint16_t tfd_offset[IWM_TFD_QUEUE_BC_SIZE]; } __packed; /* * END iwl-fh.h */ /* * BEGIN mvm/fw-api.h */ #define IWM_TX_CRC_SIZE 4 #define IWM_TX_DELIMITER_SIZE 4 /* Maximum number of Tx queues. */ #define IWM_MAX_QUEUES 31 /** * DQA - Dynamic Queue Allocation -introduction * * Dynamic Queue Allocation (AKA "DQA") is a feature implemented in iwlwifi * to allow dynamic allocation of queues on-demand, rather than allocate them * statically ahead of time. Ideally, we would like to allocate one queue * per RA/TID, thus allowing an AP - for example - to send BE traffic to STA2 * even if it also needs to send traffic to a sleeping STA1, without being * blocked by the sleeping station. * * Although the queues in DQA mode are dynamically allocated, there are still * some queues that are statically allocated: * TXQ #0 - command queue * TXQ #1 - aux frames * TXQ #2 - P2P device frames * TXQ #3 - P2P GO/SoftAP GCAST/BCAST frames * TXQ #4 - BSS DATA frames queue * TXQ #5-8 - non-QoS data, QoS no-data, and MGMT frames queue pool * TXQ #9 - P2P GO/SoftAP probe responses * TXQ #10-31 - QoS DATA frames queue pool (for Tx aggregation) */ /* static DQA Tx queue numbers */ #define IWM_DQA_CMD_QUEUE 0 #define IWM_DQA_AUX_QUEUE 1 #define IWM_DQA_P2P_DEVICE_QUEUE 2 #define IWM_DQA_INJECT_MONITOR_QUEUE 2 #define IWM_DQA_GCAST_QUEUE 3 #define IWM_DQA_BSS_CLIENT_QUEUE 4 #define IWM_DQA_MIN_MGMT_QUEUE 5 #define IWM_DQA_MAX_MGMT_QUEUE 8 #define IWM_DQA_AP_PROBE_RESP_QUEUE 9 #define IWM_DQA_MIN_DATA_QUEUE 10 #define IWM_DQA_MAX_DATA_QUEUE 31 /* Reserve 8 DQA Tx queues, from 10 up to 17, for A-MPDU aggregation. */ #define IWM_MAX_TID_COUNT 8 #define IWM_FIRST_AGG_TX_QUEUE IWM_DQA_MIN_DATA_QUEUE #define IWM_LAST_AGG_TX_QUEUE (IWM_FIRST_AGG_TX_QUEUE + IWM_MAX_TID_COUNT - 1) /* legacy non-DQA queues; the legacy command queue uses a different number! */ #define IWM_OFFCHANNEL_QUEUE 8 #define IWM_CMD_QUEUE 9 #define IWM_AUX_QUEUE 15 #define IWM_TX_FIFO_BK 0 #define IWM_TX_FIFO_BE 1 #define IWM_TX_FIFO_VI 2 #define IWM_TX_FIFO_VO 3 #define IWM_TX_FIFO_MCAST 5 #define IWM_TX_FIFO_CMD 7 #define IWM_STATION_COUNT 16 /* * Commands */ #define IWM_ALIVE 0x1 #define IWM_REPLY_ERROR 0x2 #define IWM_INIT_COMPLETE_NOTIF 0x4 /* PHY context commands */ #define IWM_PHY_CONTEXT_CMD 0x8 #define IWM_DBG_CFG 0x9 /* UMAC scan commands */ #define IWM_SCAN_ITERATION_COMPLETE_UMAC 0xb5 #define IWM_SCAN_CFG_CMD 0xc #define IWM_SCAN_REQ_UMAC 0xd #define IWM_SCAN_ABORT_UMAC 0xe #define IWM_SCAN_COMPLETE_UMAC 0xf /* station table */ #define IWM_ADD_STA_KEY 0x17 #define IWM_ADD_STA 0x18 #define IWM_REMOVE_STA 0x19 /* TX */ #define IWM_TX_CMD 0x1c #define IWM_TXPATH_FLUSH 0x1e #define IWM_MGMT_MCAST_KEY 0x1f /* scheduler config */ #define IWM_SCD_QUEUE_CFG 0x1d /* global key */ #define IWM_WEP_KEY 0x20 /* MAC and Binding commands */ #define IWM_MAC_CONTEXT_CMD 0x28 #define IWM_TIME_EVENT_CMD 0x29 /* both CMD and response */ #define IWM_TIME_EVENT_NOTIFICATION 0x2a #define IWM_BINDING_CONTEXT_CMD 0x2b #define IWM_TIME_QUOTA_CMD 0x2c #define IWM_NON_QOS_TX_COUNTER_CMD 0x2d #define IWM_LQ_CMD 0x4e /* Calibration */ #define IWM_TEMPERATURE_NOTIFICATION 0x62 #define IWM_CALIBRATION_CFG_CMD 0x65 #define IWM_CALIBRATION_RES_NOTIFICATION 0x66 #define IWM_CALIBRATION_COMPLETE_NOTIFICATION 0x67 #define IWM_RADIO_VERSION_NOTIFICATION 0x68 /* paging block to FW cpu2 */ #define IWM_FW_PAGING_BLOCK_CMD 0x4f /* Scan offload */ #define IWM_SCAN_OFFLOAD_REQUEST_CMD 0x51 #define IWM_SCAN_OFFLOAD_ABORT_CMD 0x52 #define IWM_HOT_SPOT_CMD 0x53 #define IWM_SCAN_OFFLOAD_COMPLETE 0x6d #define IWM_SCAN_OFFLOAD_UPDATE_PROFILES_CMD 0x6e #define IWM_SCAN_OFFLOAD_CONFIG_CMD 0x6f #define IWM_MATCH_FOUND_NOTIFICATION 0xd9 #define IWM_SCAN_ITERATION_COMPLETE 0xe7 /* Phy */ #define IWM_PHY_CONFIGURATION_CMD 0x6a #define IWM_CALIB_RES_NOTIF_PHY_DB 0x6b #define IWM_PHY_DB_CMD 0x6c /* Power - legacy power table command */ #define IWM_POWER_TABLE_CMD 0x77 #define IWM_PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION 0x78 #define IWM_LTR_CONFIG 0xee /* Thermal Throttling*/ #define IWM_REPLY_THERMAL_MNG_BACKOFF 0x7e /* NVM */ #define IWM_NVM_ACCESS_CMD 0x88 #define IWM_SET_CALIB_DEFAULT_CMD 0x8e #define IWM_BEACON_NOTIFICATION 0x90 #define IWM_BEACON_TEMPLATE_CMD 0x91 #define IWM_TX_ANT_CONFIGURATION_CMD 0x98 #define IWM_BT_CONFIG 0x9b #define IWM_STATISTICS_NOTIFICATION 0x9d #define IWM_REDUCE_TX_POWER_CMD 0x9f /* RF-KILL commands and notifications */ #define IWM_CARD_STATE_CMD 0xa0 #define IWM_CARD_STATE_NOTIFICATION 0xa1 #define IWM_MISSED_BEACONS_NOTIFICATION 0xa2 #define IWM_MFUART_LOAD_NOTIFICATION 0xb1 /* Power - new power table command */ #define IWM_MAC_PM_POWER_TABLE 0xa9 #define IWM_REPLY_RX_PHY_CMD 0xc0 #define IWM_REPLY_RX_MPDU_CMD 0xc1 #define IWM_BA_NOTIF 0xc5 /* Location Aware Regulatory */ #define IWM_MCC_UPDATE_CMD 0xc8 #define IWM_MCC_CHUB_UPDATE_CMD 0xc9 /* BT Coex */ #define IWM_BT_COEX_PRIO_TABLE 0xcc #define IWM_BT_COEX_PROT_ENV 0xcd #define IWM_BT_PROFILE_NOTIFICATION 0xce #define IWM_BT_COEX_CI 0x5d #define IWM_REPLY_SF_CFG_CMD 0xd1 #define IWM_REPLY_BEACON_FILTERING_CMD 0xd2 /* DTS measurements */ #define IWM_CMD_DTS_MEASUREMENT_TRIGGER 0xdc #define IWM_DTS_MEASUREMENT_NOTIFICATION 0xdd #define IWM_REPLY_DEBUG_CMD 0xf0 #define IWM_DEBUG_LOG_MSG 0xf7 #define IWM_MCAST_FILTER_CMD 0xd0 /* D3 commands/notifications */ #define IWM_D3_CONFIG_CMD 0xd3 #define IWM_PROT_OFFLOAD_CONFIG_CMD 0xd4 #define IWM_OFFLOADS_QUERY_CMD 0xd5 #define IWM_REMOTE_WAKE_CONFIG_CMD 0xd6 /* for WoWLAN in particular */ #define IWM_WOWLAN_PATTERNS 0xe0 #define IWM_WOWLAN_CONFIGURATION 0xe1 #define IWM_WOWLAN_TSC_RSC_PARAM 0xe2 #define IWM_WOWLAN_TKIP_PARAM 0xe3 #define IWM_WOWLAN_KEK_KCK_MATERIAL 0xe4 #define IWM_WOWLAN_GET_STATUSES 0xe5 #define IWM_WOWLAN_TX_POWER_PER_DB 0xe6 /* and for NetDetect */ #define IWM_NET_DETECT_CONFIG_CMD 0x54 #define IWM_NET_DETECT_PROFILES_QUERY_CMD 0x56 #define IWM_NET_DETECT_PROFILES_CMD 0x57 #define IWM_NET_DETECT_HOTSPOTS_CMD 0x58 #define IWM_NET_DETECT_HOTSPOTS_QUERY_CMD 0x59 /* system group command IDs */ #define IWM_FSEQ_VER_MISMATCH_NOTIFICATION 0xff #define IWM_REPLY_MAX 0xff /* PHY_OPS subcommand IDs */ #define IWM_CMD_DTS_MEASUREMENT_TRIGGER_WIDE 0x0 #define IWM_CTDP_CONFIG_CMD 0x03 #define IWM_TEMP_REPORTING_THRESHOLDS_CMD 0x04 #define IWM_CT_KILL_NOTIFICATION 0xFE #define IWM_DTS_MEASUREMENT_NOTIF_WIDE 0xFF /* command groups */ #define IWM_LEGACY_GROUP 0x0 #define IWM_LONG_GROUP 0x1 #define IWM_SYSTEM_GROUP 0x2 #define IWM_MAC_CONF_GROUP 0x3 #define IWM_PHY_OPS_GROUP 0x4 #define IWM_DATA_PATH_GROUP 0x5 #define IWM_PROT_OFFLOAD_GROUP 0xb /* SYSTEM_GROUP group subcommand IDs */ #define IWM_SHARED_MEM_CFG_CMD 0x00 #define IWM_SOC_CONFIGURATION_CMD 0x01 #define IWM_INIT_EXTENDED_CFG_CMD 0x03 #define IWM_FW_ERROR_RECOVERY_CMD 0x07 /* DATA_PATH group subcommand IDs */ #define IWM_DQA_ENABLE_CMD 0x00 /* * struct iwm_dqa_enable_cmd * @cmd_queue: the TXQ number of the command queue */ struct iwm_dqa_enable_cmd { uint32_t cmd_queue; } __packed; /* DQA_CONTROL_CMD_API_S_VER_1 */ /** * struct iwm_cmd_response - generic response struct for most commands * @status: status of the command asked, changes for each one */ struct iwm_cmd_response { uint32_t status; }; /* * struct iwm_tx_ant_cfg_cmd * @valid: valid antenna configuration */ struct iwm_tx_ant_cfg_cmd { uint32_t valid; } __packed; /** * struct iwm_reduce_tx_power_cmd - TX power reduction command * IWM_REDUCE_TX_POWER_CMD = 0x9f * @flags: (reserved for future implementation) * @mac_context_id: id of the mac ctx for which we are reducing TX power. * @pwr_restriction: TX power restriction in dBms. */ struct iwm_reduce_tx_power_cmd { uint8_t flags; uint8_t mac_context_id; uint16_t pwr_restriction; } __packed; /* IWM_TX_REDUCED_POWER_API_S_VER_1 */ /* * Calibration control struct. * Sent as part of the phy configuration command. * @flow_trigger: bitmap for which calibrations to perform according to * flow triggers. * @event_trigger: bitmap for which calibrations to perform according to * event triggers. */ struct iwm_calib_ctrl { uint32_t flow_trigger; uint32_t event_trigger; } __packed; /* This defines the bitmap of various calibrations to enable in both * init ucode and runtime ucode through IWM_CALIBRATION_CFG_CMD. */ #define IWM_CALIB_CFG_XTAL_IDX (1 << 0) #define IWM_CALIB_CFG_TEMPERATURE_IDX (1 << 1) #define IWM_CALIB_CFG_VOLTAGE_READ_IDX (1 << 2) #define IWM_CALIB_CFG_PAPD_IDX (1 << 3) #define IWM_CALIB_CFG_TX_PWR_IDX (1 << 4) #define IWM_CALIB_CFG_DC_IDX (1 << 5) #define IWM_CALIB_CFG_BB_FILTER_IDX (1 << 6) #define IWM_CALIB_CFG_LO_LEAKAGE_IDX (1 << 7) #define IWM_CALIB_CFG_TX_IQ_IDX (1 << 8) #define IWM_CALIB_CFG_TX_IQ_SKEW_IDX (1 << 9) #define IWM_CALIB_CFG_RX_IQ_IDX (1 << 10) #define IWM_CALIB_CFG_RX_IQ_SKEW_IDX (1 << 11) #define IWM_CALIB_CFG_SENSITIVITY_IDX (1 << 12) #define IWM_CALIB_CFG_CHAIN_NOISE_IDX (1 << 13) #define IWM_CALIB_CFG_DISCONNECTED_ANT_IDX (1 << 14) #define IWM_CALIB_CFG_ANT_COUPLING_IDX (1 << 15) #define IWM_CALIB_CFG_DAC_IDX (1 << 16) #define IWM_CALIB_CFG_ABS_IDX (1 << 17) #define IWM_CALIB_CFG_AGC_IDX (1 << 18) /* * Phy configuration command. */ struct iwm_phy_cfg_cmd { uint32_t phy_cfg; struct iwm_calib_ctrl calib_control; } __packed; #define IWM_PHY_CFG_RADIO_TYPE ((1 << 0) | (1 << 1)) #define IWM_PHY_CFG_RADIO_STEP ((1 << 2) | (1 << 3)) #define IWM_PHY_CFG_RADIO_DASH ((1 << 4) | (1 << 5)) #define IWM_PHY_CFG_PRODUCT_NUMBER ((1 << 6) | (1 << 7)) #define IWM_PHY_CFG_TX_CHAIN_A (1 << 8) #define IWM_PHY_CFG_TX_CHAIN_B (1 << 9) #define IWM_PHY_CFG_TX_CHAIN_C (1 << 10) #define IWM_PHY_CFG_RX_CHAIN_A (1 << 12) #define IWM_PHY_CFG_RX_CHAIN_B (1 << 13) #define IWM_PHY_CFG_RX_CHAIN_C (1 << 14) #define IWM_MAX_DTS_TRIPS 8 /** * struct iwm_ct_kill_notif - CT-kill entry notification * * @temperature: the current temperature in celsius * @reserved: reserved */ struct iwm_ct_kill_notif { uint16_t temperature; uint16_t reserved; } __packed; /* GRP_PHY_CT_KILL_NTF */ /** * struct iwm_temp_report_ths_cmd - set temperature thresholds * (IWM_TEMP_REPORTING_THRESHOLDS_CMD) * * @num_temps: number of temperature thresholds passed * @thresholds: array with the thresholds to be configured */ struct iwm_temp_report_ths_cmd { uint32_t num_temps; uint16_t thresholds[IWM_MAX_DTS_TRIPS]; } __packed; /* GRP_PHY_TEMP_REPORTING_THRESHOLDS_CMD */ /* * PHY db */ enum iwm_phy_db_section_type { IWM_PHY_DB_CFG = 1, IWM_PHY_DB_CALIB_NCH, IWM_PHY_DB_UNUSED, IWM_PHY_DB_CALIB_CHG_PAPD, IWM_PHY_DB_CALIB_CHG_TXP, IWM_PHY_DB_MAX }; /* * phy db - configure operational ucode */ struct iwm_phy_db_cmd { uint16_t type; uint16_t length; uint8_t data[]; } __packed; /* for parsing of tx power channel group data that comes from the firmware*/ struct iwm_phy_db_chg_txp { uint32_t space; uint16_t max_channel_idx; } __packed; /* * phy db - Receive phy db chunk after calibrations */ struct iwm_calib_res_notif_phy_db { uint16_t type; uint16_t length; uint8_t data[]; } __packed; /* 7k family NVM HW-Section offset (in words) definitions */ #define IWM_HW_ADDR 0x15 /* 7k family NVM SW-Section offset (in words) definitions */ #define IWM_NVM_SW_SECTION 0x1C0 #define IWM_NVM_VERSION 0 #define IWM_RADIO_CFG 1 #define IWM_SKU 2 #define IWM_N_HW_ADDRS 3 #define IWM_NVM_CHANNELS 0x1E0 - IWM_NVM_SW_SECTION /* 7k family NVM calibration section offset (in words) definitions */ #define IWM_NVM_CALIB_SECTION 0x2B8 #define IWM_XTAL_CALIB (0x316 - IWM_NVM_CALIB_SECTION) /* 8k family NVM HW-Section offset (in words) definitions */ #define IWM_HW_ADDR0_WFPM_8000 0x12 #define IWM_HW_ADDR1_WFPM_8000 0x16 #define IWM_HW_ADDR0_PCIE_8000 0x8A #define IWM_HW_ADDR1_PCIE_8000 0x8E #define IWM_MAC_ADDRESS_OVERRIDE_8000 1 /* 8k family NVM SW-Section offset (in words) definitions */ #define IWM_NVM_SW_SECTION_8000 0x1C0 #define IWM_NVM_VERSION_8000 0 #define IWM_RADIO_CFG_8000 0 #define IWM_SKU_8000 2 #define IWM_N_HW_ADDRS_8000 3 /* 8k family NVM REGULATORY -Section offset (in words) definitions */ #define IWM_NVM_CHANNELS_8000 0 #define IWM_NVM_LAR_OFFSET_8000_OLD 0x4C7 #define IWM_NVM_LAR_OFFSET_8000 0x507 #define IWM_NVM_LAR_ENABLED_8000 0x7 /* 8k family NVM calibration section offset (in words) definitions */ #define IWM_NVM_CALIB_SECTION_8000 0x2B8 #define IWM_XTAL_CALIB_8000 (0x316 - IWM_NVM_CALIB_SECTION_8000) /* SKU Capabilities (actual values from NVM definition) */ #define IWM_NVM_SKU_CAP_BAND_24GHZ (1 << 0) #define IWM_NVM_SKU_CAP_BAND_52GHZ (1 << 1) #define IWM_NVM_SKU_CAP_11N_ENABLE (1 << 2) #define IWM_NVM_SKU_CAP_11AC_ENABLE (1 << 3) #define IWM_NVM_SKU_CAP_MIMO_DISABLE (1 << 5) /* radio config bits (actual values from NVM definition) */ #define IWM_NVM_RF_CFG_DASH_MSK(x) (x & 0x3) /* bits 0-1 */ #define IWM_NVM_RF_CFG_STEP_MSK(x) ((x >> 2) & 0x3) /* bits 2-3 */ #define IWM_NVM_RF_CFG_TYPE_MSK(x) ((x >> 4) & 0x3) /* bits 4-5 */ #define IWM_NVM_RF_CFG_PNUM_MSK(x) ((x >> 6) & 0x3) /* bits 6-7 */ #define IWM_NVM_RF_CFG_TX_ANT_MSK(x) ((x >> 8) & 0xF) /* bits 8-11 */ #define IWM_NVM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */ #define IWM_NVM_RF_CFG_PNUM_MSK_8000(x) (x & 0xF) #define IWM_NVM_RF_CFG_DASH_MSK_8000(x) ((x >> 4) & 0xF) #define IWM_NVM_RF_CFG_STEP_MSK_8000(x) ((x >> 8) & 0xF) #define IWM_NVM_RF_CFG_TYPE_MSK_8000(x) ((x >> 12) & 0xFFF) #define IWM_NVM_RF_CFG_TX_ANT_MSK_8000(x) ((x >> 24) & 0xF) #define IWM_NVM_RF_CFG_RX_ANT_MSK_8000(x) ((x >> 28) & 0xF) /* * channel flags in NVM * @IWM_NVM_CHANNEL_VALID: channel is usable for this SKU/geo * @IWM_NVM_CHANNEL_IBSS: usable as an IBSS channel * @IWM_NVM_CHANNEL_ACTIVE: active scanning allowed * @IWM_NVM_CHANNEL_RADAR: radar detection required * @IWM_NVM_CHANNEL_DFS: dynamic freq selection candidate * @IWM_NVM_CHANNEL_WIDE: 20 MHz channel okay (?) * @IWM_NVM_CHANNEL_40MHZ: 40 MHz channel okay (?) * @IWM_NVM_CHANNEL_80MHZ: 80 MHz channel okay (?) * @IWM_NVM_CHANNEL_160MHZ: 160 MHz channel okay (?) */ #define IWM_NVM_CHANNEL_VALID (1 << 0) #define IWM_NVM_CHANNEL_IBSS (1 << 1) #define IWM_NVM_CHANNEL_ACTIVE (1 << 3) #define IWM_NVM_CHANNEL_RADAR (1 << 4) #define IWM_NVM_CHANNEL_DFS (1 << 7) #define IWM_NVM_CHANNEL_WIDE (1 << 8) #define IWM_NVM_CHANNEL_40MHZ (1 << 9) #define IWM_NVM_CHANNEL_80MHZ (1 << 10) #define IWM_NVM_CHANNEL_160MHZ (1 << 11) /* Target of the IWM_NVM_ACCESS_CMD */ #define IWM_NVM_ACCESS_TARGET_CACHE 0 #define IWM_NVM_ACCESS_TARGET_OTP 1 #define IWM_NVM_ACCESS_TARGET_EEPROM 2 /* Section types for IWM_NVM_ACCESS_CMD */ #define IWM_NVM_SECTION_TYPE_HW 0 #define IWM_NVM_SECTION_TYPE_SW 1 #define IWM_NVM_SECTION_TYPE_PAPD 2 #define IWM_NVM_SECTION_TYPE_REGULATORY 3 #define IWM_NVM_SECTION_TYPE_CALIBRATION 4 #define IWM_NVM_SECTION_TYPE_PRODUCTION 5 #define IWM_NVM_SECTION_TYPE_POST_FCS_CALIB 6 /* 7 unknown */ #define IWM_NVM_SECTION_TYPE_REGULATORY_SDP 8 /* 9 unknown */ #define IWM_NVM_SECTION_TYPE_HW_8000 10 #define IWM_NVM_SECTION_TYPE_MAC_OVERRIDE 11 #define IWM_NVM_SECTION_TYPE_PHY_SKU 12 #define IWM_NVM_NUM_OF_SECTIONS 13 /** * struct iwm_nvm_access_cmd_ver2 - Request the device to send an NVM section * @op_code: 0 - read, 1 - write * @target: IWM_NVM_ACCESS_TARGET_* * @type: IWM_NVM_SECTION_TYPE_* * @offset: offset in bytes into the section * @length: in bytes, to read/write * @data: if write operation, the data to write. On read its empty */ struct iwm_nvm_access_cmd { uint8_t op_code; uint8_t target; uint16_t type; uint16_t offset; uint16_t length; uint8_t data[]; } __packed; /* IWM_NVM_ACCESS_CMD_API_S_VER_2 */ /* * Block paging calculations */ #define IWM_PAGE_2_EXP_SIZE 12 /* 4K == 2^12 */ #define IWM_FW_PAGING_SIZE (1 << IWM_PAGE_2_EXP_SIZE) /* page size is 4KB */ #define IWM_PAGE_PER_GROUP_2_EXP_SIZE 3 /* 8 pages per group */ #define IWM_NUM_OF_PAGE_PER_GROUP (1 << IWM_PAGE_PER_GROUP_2_EXP_SIZE) /* don't change, support only 32KB size */ #define IWM_PAGING_BLOCK_SIZE (IWM_NUM_OF_PAGE_PER_GROUP * IWM_FW_PAGING_SIZE) /* 32K == 2^15 */ #define IWM_BLOCK_2_EXP_SIZE (IWM_PAGE_2_EXP_SIZE + IWM_PAGE_PER_GROUP_2_EXP_SIZE) /* * Image paging calculations */ #define IWM_BLOCK_PER_IMAGE_2_EXP_SIZE 5 /* 2^5 == 32 blocks per image */ #define IWM_NUM_OF_BLOCK_PER_IMAGE (1 << IWM_BLOCK_PER_IMAGE_2_EXP_SIZE) /* maximum image size 1024KB */ #define IWM_MAX_PAGING_IMAGE_SIZE (IWM_NUM_OF_BLOCK_PER_IMAGE * IWM_PAGING_BLOCK_SIZE) /* Virtual address signature */ #define IWM_PAGING_ADDR_SIG 0xAA000000 #define IWM_PAGING_CMD_IS_SECURED (1 << 9) #define IWM_PAGING_CMD_IS_ENABLED (1 << 8) #define IWM_PAGING_CMD_NUM_OF_PAGES_IN_LAST_GRP_POS 0 #define IWM_PAGING_TLV_SECURE_MASK 1 #define IWM_NUM_OF_FW_PAGING_BLOCKS 33 /* 32 for data and 1 block for CSS */ /* * struct iwm_fw_paging_cmd - paging layout * * (IWM_FW_PAGING_BLOCK_CMD = 0x4f) * * Send to FW the paging layout in the driver. * * @flags: various flags for the command * @block_size: the block size in powers of 2 * @block_num: number of blocks specified in the command. * @device_phy_addr: virtual addresses from device side */ struct iwm_fw_paging_cmd { uint32_t flags; uint32_t block_size; uint32_t block_num; uint32_t device_phy_addr[IWM_NUM_OF_FW_PAGING_BLOCKS]; } __packed; /* IWM_FW_PAGING_BLOCK_CMD_API_S_VER_1 */ /** * struct iwm_nvm_access_resp_ver2 - response to IWM_NVM_ACCESS_CMD * @offset: offset in bytes into the section * @length: in bytes, either how much was written or read * @type: IWM_NVM_SECTION_TYPE_* * @status: 0 for success, fail otherwise * @data: if read operation, the data returned. Empty on write. */ struct iwm_nvm_access_resp { uint16_t offset; uint16_t length; uint16_t type; uint16_t status; uint8_t data[]; } __packed; /* IWM_NVM_ACCESS_CMD_RESP_API_S_VER_2 */ /* IWM_ALIVE 0x1 */ /* alive response is_valid values */ #define IWM_ALIVE_RESP_UCODE_OK (1 << 0) #define IWM_ALIVE_RESP_RFKILL (1 << 1) /* alive response ver_type values */ #define IWM_FW_TYPE_HW 0 #define IWM_FW_TYPE_PROT 1 #define IWM_FW_TYPE_AP 2 #define IWM_FW_TYPE_WOWLAN 3 #define IWM_FW_TYPE_TIMING 4 #define IWM_FW_TYPE_WIPAN 5 /* alive response ver_subtype values */ #define IWM_FW_SUBTYPE_FULL_FEATURE 0 #define IWM_FW_SUBTYPE_BOOTSRAP 1 /* Not valid */ #define IWM_FW_SUBTYPE_REDUCED 2 #define IWM_FW_SUBTYPE_ALIVE_ONLY 3 #define IWM_FW_SUBTYPE_WOWLAN 4 #define IWM_FW_SUBTYPE_AP_SUBTYPE 5 #define IWM_FW_SUBTYPE_WIPAN 6 #define IWM_FW_SUBTYPE_INITIALIZE 9 #define IWM_ALIVE_STATUS_ERR 0xDEAD #define IWM_ALIVE_STATUS_OK 0xCAFE #define IWM_ALIVE_FLG_RFKILL (1 << 0) struct iwm_lmac_alive { uint32_t ucode_major; uint32_t ucode_minor; uint8_t ver_subtype; uint8_t ver_type; uint8_t mac; uint8_t opt; uint32_t timestamp; uint32_t error_event_table_ptr; /* SRAM address for error log */ uint32_t log_event_table_ptr; /* SRAM address for LMAC event log */ uint32_t cpu_register_ptr; uint32_t dbgm_config_ptr; uint32_t alive_counter_ptr; uint32_t scd_base_ptr; /* SRAM address for SCD */ uint32_t st_fwrd_addr; /* pointer to Store and forward */ uint32_t st_fwrd_size; } __packed; /* UCODE_ALIVE_NTFY_API_S_VER_3 */ struct iwm_umac_alive { uint32_t umac_major; /* UMAC version: major */ uint32_t umac_minor; /* UMAC version: minor */ uint32_t error_info_addr; /* SRAM address for UMAC error log */ uint32_t dbg_print_buff_addr; } __packed; /* UMAC_ALIVE_DATA_API_S_VER_2 */ struct iwm_alive_resp_v3 { uint16_t status; uint16_t flags; struct iwm_lmac_alive lmac_data; struct iwm_umac_alive umac_data; } __packed; /* ALIVE_RES_API_S_VER_3 */ struct iwm_alive_resp { uint16_t status; uint16_t flags; struct iwm_lmac_alive lmac_data[2]; struct iwm_umac_alive umac_data; }__packed; /* ALIVE_RES_API_S_VER_4 */ #define IWM_SOC_CONFIG_CMD_FLAGS_DISCRETE (1 << 0) #define IWM_SOC_CONFIG_CMD_FLAGS_LOW_LATENCY (1 << 1) #define IWM_SOC_FLAGS_LTR_APPLY_DELAY_MASK 0xc #define IWM_SOC_FLAGS_LTR_APPLY_DELAY_NONE 0 #define IWM_SOC_FLAGS_LTR_APPLY_DELAY_200 1 #define IWM_SOC_FLAGS_LTR_APPLY_DELAY_2500 2 #define IWM_SOC_FLAGS_LTR_APPLY_DELAY_1820 3 /** * struct iwm_soc_configuration_cmd - Set device stabilization latency * * @flags: soc settings flags. In VER_1, we can only set the DISCRETE * flag, because the FW treats the whole value as an integer. In * VER_2, we can set the bits independently. * @latency: time for SOC to ensure stable power & XTAL */ struct iwm_soc_configuration_cmd { uint32_t flags; uint32_t latency; } __packed; /* * SOC_CONFIGURATION_CMD_S_VER_1 (see description above) * SOC_CONFIGURATION_CMD_S_VER_2 */ /* Error response/notification */ #define IWM_FW_ERR_UNKNOWN_CMD 0x0 #define IWM_FW_ERR_INVALID_CMD_PARAM 0x1 #define IWM_FW_ERR_SERVICE 0x2 #define IWM_FW_ERR_ARC_MEMORY 0x3 #define IWM_FW_ERR_ARC_CODE 0x4 #define IWM_FW_ERR_WATCH_DOG 0x5 #define IWM_FW_ERR_WEP_GRP_KEY_INDX 0x10 #define IWM_FW_ERR_WEP_KEY_SIZE 0x11 #define IWM_FW_ERR_OBSOLETE_FUNC 0x12 #define IWM_FW_ERR_UNEXPECTED 0xFE #define IWM_FW_ERR_FATAL 0xFF /** * struct iwm_error_resp - FW error indication * ( IWM_REPLY_ERROR = 0x2 ) * @error_type: one of IWM_FW_ERR_* * @cmd_id: the command ID for which the error occured * @bad_cmd_seq_num: sequence number of the erroneous command * @error_service: which service created the error, applicable only if * error_type = 2, otherwise 0 * @timestamp: TSF in usecs. */ struct iwm_error_resp { uint32_t error_type; uint8_t cmd_id; uint8_t reserved1; uint16_t bad_cmd_seq_num; uint32_t error_service; uint64_t timestamp; } __packed; #define IWM_FW_CMD_VER_UNKNOWN 99 /** * struct iwm_fw_cmd_version - firmware command version entry * @cmd: command ID * @group: group ID * @cmd_ver: command version * @notif_ver: notification version */ struct iwm_fw_cmd_version { uint8_t cmd; uint8_t group; uint8_t cmd_ver; uint8_t notif_ver; } __packed; /* Common PHY, MAC and Bindings definitions */ #define IWM_MAX_MACS_IN_BINDING (3) #define IWM_MAX_BINDINGS (4) #define IWM_AUX_BINDING_INDEX (3) #define IWM_MAX_PHYS (4) /* Used to extract ID and color from the context dword */ #define IWM_FW_CTXT_ID_POS (0) #define IWM_FW_CTXT_ID_MSK (0xff << IWM_FW_CTXT_ID_POS) #define IWM_FW_CTXT_COLOR_POS (8) #define IWM_FW_CTXT_COLOR_MSK (0xff << IWM_FW_CTXT_COLOR_POS) #define IWM_FW_CTXT_INVALID (0xffffffff) #define IWM_FW_CMD_ID_AND_COLOR(_id, _color) ((_id << IWM_FW_CTXT_ID_POS) |\ (_color << IWM_FW_CTXT_COLOR_POS)) /* Possible actions on PHYs, MACs and Bindings */ #define IWM_FW_CTXT_ACTION_STUB 0 #define IWM_FW_CTXT_ACTION_ADD 1 #define IWM_FW_CTXT_ACTION_MODIFY 2 #define IWM_FW_CTXT_ACTION_REMOVE 3 #define IWM_FW_CTXT_ACTION_NUM 4 /* COMMON_CONTEXT_ACTION_API_E_VER_1 */ /* Time Events */ /* Time Event types, according to MAC type */ /* BSS Station Events */ #define IWM_TE_BSS_STA_AGGRESSIVE_ASSOC 0 #define IWM_TE_BSS_STA_ASSOC 1 #define IWM_TE_BSS_EAP_DHCP_PROT 2 #define IWM_TE_BSS_QUIET_PERIOD 3 /* P2P Device Events */ #define IWM_TE_P2P_DEVICE_DISCOVERABLE 4 #define IWM_TE_P2P_DEVICE_LISTEN 5 #define IWM_TE_P2P_DEVICE_ACTION_SCAN 6 #define IWM_TE_P2P_DEVICE_FULL_SCAN 7 /* P2P Client Events */ #define IWM_TE_P2P_CLIENT_AGGRESSIVE_ASSOC 8 #define IWM_TE_P2P_CLIENT_ASSOC 9 #define IWM_TE_P2P_CLIENT_QUIET_PERIOD 10 /* P2P GO Events */ #define IWM_TE_P2P_GO_ASSOC_PROT 11 #define IWM_TE_P2P_GO_REPETITIVE_NOA 12 #define IWM_TE_P2P_GO_CT_WINDOW 13 /* WiDi Sync Events */ #define IWM_TE_WIDI_TX_SYNC 14 #define IWM_TE_MAX 15 /* IWM_MAC_EVENT_TYPE_API_E_VER_1 */ /* Time event - defines for command API v1 */ /* * @IWM_TE_V1_FRAG_NONE: fragmentation of the time event is NOT allowed. * @IWM_TE_V1_FRAG_SINGLE: fragmentation of the time event is allowed, but only * the first fragment is scheduled. * @IWM_TE_V1_FRAG_DUAL: fragmentation of the time event is allowed, but only * the first 2 fragments are scheduled. * @IWM_TE_V1_FRAG_ENDLESS: fragmentation of the time event is allowed, and any * number of fragments are valid. * * Other than the constant defined above, specifying a fragmentation value 'x' * means that the event can be fragmented but only the first 'x' will be * scheduled. */ #define IWM_TE_V1_FRAG_NONE 0 #define IWM_TE_V1_FRAG_SINGLE 1 #define IWM_TE_V1_FRAG_DUAL 2 #define IWM_TE_V1_FRAG_ENDLESS 0xffffffff /* If a Time Event can be fragmented, this is the max number of fragments */ #define IWM_TE_V1_FRAG_MAX_MSK 0x0fffffff /* Repeat the time event endlessly (until removed) */ #define IWM_TE_V1_REPEAT_ENDLESS 0xffffffff /* If a Time Event has bounded repetitions, this is the maximal value */ #define IWM_TE_V1_REPEAT_MAX_MSK_V1 0x0fffffff /* Time Event dependencies: none, on another TE, or in a specific time */ #define IWM_TE_V1_INDEPENDENT 0 #define IWM_TE_V1_DEP_OTHER (1 << 0) #define IWM_TE_V1_DEP_TSF (1 << 1) #define IWM_TE_V1_EVENT_SOCIOPATHIC (1 << 2) /* IWM_MAC_EVENT_DEPENDENCY_POLICY_API_E_VER_2 */ /* * @IWM_TE_V1_NOTIF_NONE: no notifications * @IWM_TE_V1_NOTIF_HOST_EVENT_START: request/receive notification on event start * @IWM_TE_V1_NOTIF_HOST_EVENT_END:request/receive notification on event end * @IWM_TE_V1_NOTIF_INTERNAL_EVENT_START: internal FW use * @IWM_TE_V1_NOTIF_INTERNAL_EVENT_END: internal FW use. * @IWM_TE_V1_NOTIF_HOST_FRAG_START: request/receive notification on frag start * @IWM_TE_V1_NOTIF_HOST_FRAG_END:request/receive notification on frag end * @IWM_TE_V1_NOTIF_INTERNAL_FRAG_START: internal FW use. * @IWM_TE_V1_NOTIF_INTERNAL_FRAG_END: internal FW use. * * Supported Time event notifications configuration. * A notification (both event and fragment) includes a status indicating weather * the FW was able to schedule the event or not. For fragment start/end * notification the status is always success. There is no start/end fragment * notification for monolithic events. */ #define IWM_TE_V1_NOTIF_NONE 0 #define IWM_TE_V1_NOTIF_HOST_EVENT_START (1 << 0) #define IWM_TE_V1_NOTIF_HOST_EVENT_END (1 << 1) #define IWM_TE_V1_NOTIF_INTERNAL_EVENT_START (1 << 2) #define IWM_TE_V1_NOTIF_INTERNAL_EVENT_END (1 << 3) #define IWM_TE_V1_NOTIF_HOST_FRAG_START (1 << 4) #define IWM_TE_V1_NOTIF_HOST_FRAG_END (1 << 5) #define IWM_TE_V1_NOTIF_INTERNAL_FRAG_START (1 << 6) #define IWM_TE_V1_NOTIF_INTERNAL_FRAG_END (1 << 7) /* IWM_MAC_EVENT_ACTION_API_E_VER_2 */ /* Time event - defines for command API */ /** * DOC: Time Events - what is it? * * Time Events are a fw feature that allows the driver to control the presence * of the device on the channel. Since the fw supports multiple channels * concurrently, the fw may choose to jump to another channel at any time. * In order to make sure that the fw is on a specific channel at a certain time * and for a certain duration, the driver needs to issue a time event. * * The simplest example is for BSS association. The driver issues a time event, * waits for it to start, and only then tells mac80211 that we can start the * association. This way, we make sure that the association will be done * smoothly and won't be interrupted by channel switch decided within the fw. */ /** * DOC: The flow against the fw * * When the driver needs to make sure we are in a certain channel, at a certain * time and for a certain duration, it sends a Time Event. The flow against the * fw goes like this: * 1) Driver sends a TIME_EVENT_CMD to the fw * 2) Driver gets the response for that command. This response contains the * Unique ID (UID) of the event. * 3) The fw sends notification when the event starts. * * Of course the API provides various options that allow to cover parameters * of the flow. * What is the duration of the event? * What is the start time of the event? * Is there an end-time for the event? * How much can the event be delayed? * Can the event be split? * If yes what is the maximal number of chunks? * etc... */ /* * @IWM_TE_V2_FRAG_NONE: fragmentation of the time event is NOT allowed. * @IWM_TE_V2_FRAG_SINGLE: fragmentation of the time event is allowed, but only * the first fragment is scheduled. * @IWM_TE_V2_FRAG_DUAL: fragmentation of the time event is allowed, but only * the first 2 fragments are scheduled. * @IWM_TE_V2_FRAG_ENDLESS: fragmentation of the time event is allowed, and any * number of fragments are valid. * * Other than the constant defined above, specifying a fragmentation value 'x' * means that the event can be fragmented but only the first 'x' will be * scheduled. */ #define IWM_TE_V2_FRAG_NONE 0 #define IWM_TE_V2_FRAG_SINGLE 1 #define IWM_TE_V2_FRAG_DUAL 2 #define IWM_TE_V2_FRAG_MAX 0xfe #define IWM_TE_V2_FRAG_ENDLESS 0xff /* Repeat the time event endlessly (until removed) */ #define IWM_TE_V2_REPEAT_ENDLESS 0xff /* If a Time Event has bounded repetitions, this is the maximal value */ #define IWM_TE_V2_REPEAT_MAX 0xfe #define IWM_TE_V2_PLACEMENT_POS 12 #define IWM_TE_V2_ABSENCE_POS 15 /* Time event policy values * A notification (both event and fragment) includes a status indicating weather * the FW was able to schedule the event or not. For fragment start/end * notification the status is always success. There is no start/end fragment * notification for monolithic events. * * @IWM_TE_V2_DEFAULT_POLICY: independent, social, present, unoticable * @IWM_TE_V2_NOTIF_HOST_EVENT_START: request/receive notification on event start * @IWM_TE_V2_NOTIF_HOST_EVENT_END:request/receive notification on event end * @IWM_TE_V2_NOTIF_INTERNAL_EVENT_START: internal FW use * @IWM_TE_V2_NOTIF_INTERNAL_EVENT_END: internal FW use. * @IWM_TE_V2_NOTIF_HOST_FRAG_START: request/receive notification on frag start * @IWM_TE_V2_NOTIF_HOST_FRAG_END:request/receive notification on frag end * @IWM_TE_V2_NOTIF_INTERNAL_FRAG_START: internal FW use. * @IWM_TE_V2_NOTIF_INTERNAL_FRAG_END: internal FW use. * @IWM_TE_V2_DEP_OTHER: depends on another time event * @IWM_TE_V2_DEP_TSF: depends on a specific time * @IWM_TE_V2_EVENT_SOCIOPATHIC: can't co-exist with other events of tha same MAC * @IWM_TE_V2_ABSENCE: are we present or absent during the Time Event. */ #define IWM_TE_V2_DEFAULT_POLICY 0x0 /* notifications (event start/stop, fragment start/stop) */ #define IWM_TE_V2_NOTIF_HOST_EVENT_START (1 << 0) #define IWM_TE_V2_NOTIF_HOST_EVENT_END (1 << 1) #define IWM_TE_V2_NOTIF_INTERNAL_EVENT_START (1 << 2) #define IWM_TE_V2_NOTIF_INTERNAL_EVENT_END (1 << 3) #define IWM_TE_V2_NOTIF_HOST_FRAG_START (1 << 4) #define IWM_TE_V2_NOTIF_HOST_FRAG_END (1 << 5) #define IWM_TE_V2_NOTIF_INTERNAL_FRAG_START (1 << 6) #define IWM_TE_V2_NOTIF_INTERNAL_FRAG_END (1 << 7) #define IWM_T2_V2_START_IMMEDIATELY (1 << 11) #define IWM_TE_V2_NOTIF_MSK 0xff /* placement characteristics */ #define IWM_TE_V2_DEP_OTHER (1 << IWM_TE_V2_PLACEMENT_POS) #define IWM_TE_V2_DEP_TSF (1 << (IWM_TE_V2_PLACEMENT_POS + 1)) #define IWM_TE_V2_EVENT_SOCIOPATHIC (1 << (IWM_TE_V2_PLACEMENT_POS + 2)) /* are we present or absent during the Time Event. */ #define IWM_TE_V2_ABSENCE (1 << IWM_TE_V2_ABSENCE_POS) /** * struct iwm_time_event_cmd_api - configuring Time Events * with struct IWM_MAC_TIME_EVENT_DATA_API_S_VER_2 (see also * with version 1. determined by IWM_UCODE_TLV_FLAGS) * ( IWM_TIME_EVENT_CMD = 0x29 ) * @id_and_color: ID and color of the relevant MAC * @action: action to perform, one of IWM_FW_CTXT_ACTION_* * @id: this field has two meanings, depending on the action: * If the action is ADD, then it means the type of event to add. * For all other actions it is the unique event ID assigned when the * event was added by the FW. * @apply_time: When to start the Time Event (in GP2) * @max_delay: maximum delay to event's start (apply time), in TU * @depends_on: the unique ID of the event we depend on (if any) * @interval: interval between repetitions, in TU * @duration: duration of event in TU * @repeat: how many repetitions to do, can be IWM_TE_REPEAT_ENDLESS * @max_frags: maximal number of fragments the Time Event can be divided to * @policy: defines whether uCode shall notify the host or other uCode modules * on event and/or fragment start and/or end * using one of IWM_TE_INDEPENDENT, IWM_TE_DEP_OTHER, IWM_TE_DEP_TSF * IWM_TE_EVENT_SOCIOPATHIC * using IWM_TE_ABSENCE and using IWM_TE_NOTIF_* */ struct iwm_time_event_cmd { /* COMMON_INDEX_HDR_API_S_VER_1 */ uint32_t id_and_color; uint32_t action; uint32_t id; /* IWM_MAC_TIME_EVENT_DATA_API_S_VER_2 */ uint32_t apply_time; uint32_t max_delay; uint32_t depends_on; uint32_t interval; uint32_t duration; uint8_t repeat; uint8_t max_frags; uint16_t policy; } __packed; /* IWM_MAC_TIME_EVENT_CMD_API_S_VER_2 */ /** * struct iwm_time_event_resp - response structure to iwm_time_event_cmd * @status: bit 0 indicates success, all others specify errors * @id: the Time Event type * @unique_id: the unique ID assigned (in ADD) or given (others) to the TE * @id_and_color: ID and color of the relevant MAC */ struct iwm_time_event_resp { uint32_t status; uint32_t id; uint32_t unique_id; uint32_t id_and_color; } __packed; /* IWM_MAC_TIME_EVENT_RSP_API_S_VER_1 */ /** * struct iwm_time_event_notif - notifications of time event start/stop * ( IWM_TIME_EVENT_NOTIFICATION = 0x2a ) * @timestamp: action timestamp in GP2 * @session_id: session's unique id * @unique_id: unique id of the Time Event itself * @id_and_color: ID and color of the relevant MAC * @action: one of IWM_TE_NOTIF_START or IWM_TE_NOTIF_END * @status: true if scheduled, false otherwise (not executed) */ struct iwm_time_event_notif { uint32_t timestamp; uint32_t session_id; uint32_t unique_id; uint32_t id_and_color; uint32_t action; uint32_t status; } __packed; /* IWM_MAC_TIME_EVENT_NTFY_API_S_VER_1 */ /* Bindings and Time Quota */ /** * struct iwm_binding_cmd_v1 - configuring bindings * ( IWM_BINDING_CONTEXT_CMD = 0x2b ) * @id_and_color: ID and color of the relevant Binding * @action: action to perform, one of IWM_FW_CTXT_ACTION_* * @macs: array of MAC id and colors which belong to the binding * @phy: PHY id and color which belongs to the binding * @lmac_id: the lmac id the binding belongs to */ struct iwm_binding_cmd_v1 { /* COMMON_INDEX_HDR_API_S_VER_1 */ uint32_t id_and_color; uint32_t action; /* IWM_BINDING_DATA_API_S_VER_1 */ uint32_t macs[IWM_MAX_MACS_IN_BINDING]; uint32_t phy; } __packed; /* IWM_BINDING_CMD_API_S_VER_1 */ /** * struct iwm_binding_cmd - configuring bindings * ( IWM_BINDING_CONTEXT_CMD = 0x2b ) * @id_and_color: ID and color of the relevant Binding * @action: action to perform, one of IWM_FW_CTXT_ACTION_* * @macs: array of MAC id and colors which belong to the binding * @phy: PHY id and color which belongs to the binding * @lmac_id: the lmac id the binding belongs to */ struct iwm_binding_cmd { /* COMMON_INDEX_HDR_API_S_VER_1 */ uint32_t id_and_color; uint32_t action; /* IWM_BINDING_DATA_API_S_VER_1 */ uint32_t macs[IWM_MAX_MACS_IN_BINDING]; uint32_t phy; uint32_t lmac_id; } __packed; /* IWM_BINDING_CMD_API_S_VER_2 */ #define IWM_LMAC_24G_INDEX 0 #define IWM_LMAC_5G_INDEX 1 /* The maximal number of fragments in the FW's schedule session */ #define IWM_MAX_QUOTA 128 /** * struct iwm_time_quota_data - configuration of time quota per binding * @id_and_color: ID and color of the relevant Binding * @quota: absolute time quota in TU. The scheduler will try to divide the * remainig quota (after Time Events) according to this quota. * @max_duration: max uninterrupted context duration in TU */ struct iwm_time_quota_data_v1 { uint32_t id_and_color; uint32_t quota; uint32_t max_duration; } __packed; /* IWM_TIME_QUOTA_DATA_API_S_VER_1 */ /** * struct iwm_time_quota_cmd - configuration of time quota between bindings * ( IWM_TIME_QUOTA_CMD = 0x2c ) * @quotas: allocations per binding */ struct iwm_time_quota_cmd_v1 { struct iwm_time_quota_data_v1 quotas[IWM_MAX_BINDINGS]; } __packed; /* IWM_TIME_QUOTA_ALLOCATION_CMD_API_S_VER_1 */ #define IWM_QUOTA_LOW_LATENCY_NONE 0 #define IWM_QUOTA_LOW_LATENCY_TX (1 << 0) #define IWM_QUOTA_LOW_LATENCY_RX (1 << 1) /** * struct iwm_time_quota_data - configuration of time quota per binding * @id_and_color: ID and color of the relevant Binding. * @quota: absolute time quota in TU. The scheduler will try to divide the * remainig quota (after Time Events) according to this quota. * @max_duration: max uninterrupted context duration in TU * @low_latency: low latency status IWM_QUOTA_LOW_LATENCY_* */ struct iwm_time_quota_data { uint32_t id_and_color; uint32_t quota; uint32_t max_duration; uint32_t low_latency; }; /* TIME_QUOTA_DATA_API_S_VER_2 */ /** * struct iwm_time_quota_cmd - configuration of time quota between bindings * ( TIME_QUOTA_CMD = 0x2c ) * Note: on non-CDB the fourth one is the auxilary mac and is essentially zero. * On CDB the fourth one is a regular binding. * * @quotas: allocations per binding */ struct iwm_time_quota_cmd { struct iwm_time_quota_data quotas[IWM_MAX_BINDINGS]; } __packed; /* TIME_QUOTA_ALLOCATION_CMD_API_S_VER_2 */ /* PHY context */ /* Supported bands */ #define IWM_PHY_BAND_5 (0) #define IWM_PHY_BAND_24 (1) /* Supported channel width, vary if there is VHT support */ #define IWM_PHY_VHT_CHANNEL_MODE20 (0x0) #define IWM_PHY_VHT_CHANNEL_MODE40 (0x1) #define IWM_PHY_VHT_CHANNEL_MODE80 (0x2) #define IWM_PHY_VHT_CHANNEL_MODE160 (0x3) /* * Control channel position: * For legacy set bit means upper channel, otherwise lower. * For VHT - bit-2 marks if the control is lower/upper relative to center-freq * bits-1:0 mark the distance from the center freq. for 20Mhz, offset is 0. * center_freq * | * 40Mhz |_______|_______| * 80Mhz |_______|_______|_______|_______| * 160Mhz |_______|_______|_______|_______|_______|_______|_______|_______| * code 011 010 001 000 | 100 101 110 111 */ #define IWM_PHY_VHT_CTRL_POS_1_BELOW (0x0) #define IWM_PHY_VHT_CTRL_POS_2_BELOW (0x1) #define IWM_PHY_VHT_CTRL_POS_3_BELOW (0x2) #define IWM_PHY_VHT_CTRL_POS_4_BELOW (0x3) #define IWM_PHY_VHT_CTRL_POS_1_ABOVE (0x4) #define IWM_PHY_VHT_CTRL_POS_2_ABOVE (0x5) #define IWM_PHY_VHT_CTRL_POS_3_ABOVE (0x6) #define IWM_PHY_VHT_CTRL_POS_4_ABOVE (0x7) /* * @band: IWM_PHY_BAND_* * @channel: channel number * @width: PHY_[VHT|LEGACY]_CHANNEL_* * @ctrl channel: PHY_[VHT|LEGACY]_CTRL_* */ struct iwm_fw_channel_info_v1 { uint8_t band; uint8_t channel; uint8_t width; uint8_t ctrl_pos; } __packed; /* CHANNEL_CONFIG_API_S_VER_1 */ /* * struct iwm_fw_channel_info - channel information * * @channel: channel number * @band: PHY_BAND_* * @width: PHY_[VHT|LEGACY]_CHANNEL_* * @ctrl channel: PHY_[VHT|LEGACY]_CTRL_* * @reserved: for future use and alignment */ struct iwm_fw_channel_info { uint32_t channel; uint8_t band; uint8_t width; uint8_t ctrl_pos; uint8_t reserved; } __packed; /* CHANNEL_CONFIG_API_S_VER_2 */ #define IWM_PHY_RX_CHAIN_DRIVER_FORCE_POS (0) #define IWM_PHY_RX_CHAIN_DRIVER_FORCE_MSK \ (0x1 << IWM_PHY_RX_CHAIN_DRIVER_FORCE_POS) #define IWM_PHY_RX_CHAIN_VALID_POS (1) #define IWM_PHY_RX_CHAIN_VALID_MSK \ (0x7 << IWM_PHY_RX_CHAIN_VALID_POS) #define IWM_PHY_RX_CHAIN_FORCE_SEL_POS (4) #define IWM_PHY_RX_CHAIN_FORCE_SEL_MSK \ (0x7 << IWM_PHY_RX_CHAIN_FORCE_SEL_POS) #define IWM_PHY_RX_CHAIN_FORCE_MIMO_SEL_POS (7) #define IWM_PHY_RX_CHAIN_FORCE_MIMO_SEL_MSK \ (0x7 << IWM_PHY_RX_CHAIN_FORCE_MIMO_SEL_POS) #define IWM_PHY_RX_CHAIN_CNT_POS (10) #define IWM_PHY_RX_CHAIN_CNT_MSK \ (0x3 << IWM_PHY_RX_CHAIN_CNT_POS) #define IWM_PHY_RX_CHAIN_MIMO_CNT_POS (12) #define IWM_PHY_RX_CHAIN_MIMO_CNT_MSK \ (0x3 << IWM_PHY_RX_CHAIN_MIMO_CNT_POS) #define IWM_PHY_RX_CHAIN_MIMO_FORCE_POS (14) #define IWM_PHY_RX_CHAIN_MIMO_FORCE_MSK \ (0x1 << IWM_PHY_RX_CHAIN_MIMO_FORCE_POS) /* TODO: fix the value, make it depend on firmware at runtime? */ #define IWM_NUM_PHY_CTX 3 /* TODO: complete missing documentation */ /** * struct iwm_phy_context_cmd - config of the PHY context * ( IWM_PHY_CONTEXT_CMD = 0x8 ) * @id_and_color: ID and color of the relevant Binding * @action: action to perform, one of IWM_FW_CTXT_ACTION_* * @apply_time: 0 means immediate apply and context switch. * other value means apply new params after X usecs * @tx_param_color: ??? * @channel_info: * @txchain_info: ??? * @rxchain_info: ??? * @acquisition_data: ??? * @dsp_cfg_flags: set to 0 */ /* * XXX Intel forgot to bump the PHY_CONTEXT command API when they increased * the size of fw_channel_info from v1 to v2. * To keep things simple we define two versions of this struct, and both * are labled as CMD_API_VER_1. (The Linux iwlwifi driver performs dark * magic with pointers to struct members instead.) */ /* This version must be used if IWM_UCODE_TLV_CAPA_ULTRA_HB_CHANNELS is set: */ struct iwm_phy_context_cmd_uhb { /* COMMON_INDEX_HDR_API_S_VER_1 */ uint32_t id_and_color; uint32_t action; /* IWM_PHY_CONTEXT_DATA_API_S_VER_1 */ uint32_t apply_time; uint32_t tx_param_color; struct iwm_fw_channel_info ci; uint32_t txchain_info; uint32_t rxchain_info; uint32_t acquisition_data; uint32_t dsp_cfg_flags; } __packed; /* IWM_PHY_CONTEXT_CMD_API_VER_1 */ /* This version must be used otherwise: */ struct iwm_phy_context_cmd { /* COMMON_INDEX_HDR_API_S_VER_1 */ uint32_t id_and_color; uint32_t action; /* IWM_PHY_CONTEXT_DATA_API_S_VER_1 */ uint32_t apply_time; uint32_t tx_param_color; struct iwm_fw_channel_info_v1 ci; uint32_t txchain_info; uint32_t rxchain_info; uint32_t acquisition_data; uint32_t dsp_cfg_flags; } __packed; /* IWM_PHY_CONTEXT_CMD_API_VER_1 */ #define IWM_RX_INFO_PHY_CNT 8 #define IWM_RX_INFO_ENERGY_ANT_ABC_IDX 1 #define IWM_RX_INFO_ENERGY_ANT_A_MSK 0x000000ff #define IWM_RX_INFO_ENERGY_ANT_B_MSK 0x0000ff00 #define IWM_RX_INFO_ENERGY_ANT_C_MSK 0x00ff0000 #define IWM_RX_INFO_ENERGY_ANT_A_POS 0 #define IWM_RX_INFO_ENERGY_ANT_B_POS 8 #define IWM_RX_INFO_ENERGY_ANT_C_POS 16 #define IWM_RX_INFO_AGC_IDX 1 #define IWM_RX_INFO_RSSI_AB_IDX 2 #define IWM_OFDM_AGC_A_MSK 0x0000007f #define IWM_OFDM_AGC_A_POS 0 #define IWM_OFDM_AGC_B_MSK 0x00003f80 #define IWM_OFDM_AGC_B_POS 7 #define IWM_OFDM_AGC_CODE_MSK 0x3fe00000 #define IWM_OFDM_AGC_CODE_POS 20 #define IWM_OFDM_RSSI_INBAND_A_MSK 0x00ff #define IWM_OFDM_RSSI_A_POS 0 #define IWM_OFDM_RSSI_ALLBAND_A_MSK 0xff00 #define IWM_OFDM_RSSI_ALLBAND_A_POS 8 #define IWM_OFDM_RSSI_INBAND_B_MSK 0xff0000 #define IWM_OFDM_RSSI_B_POS 16 #define IWM_OFDM_RSSI_ALLBAND_B_MSK 0xff000000 #define IWM_OFDM_RSSI_ALLBAND_B_POS 24 /** * struct iwm_rx_phy_info - phy info * (IWM_REPLY_RX_PHY_CMD = 0xc0) * @non_cfg_phy_cnt: non configurable DSP phy data byte count * @cfg_phy_cnt: configurable DSP phy data byte count * @stat_id: configurable DSP phy data set ID * @reserved1: * @system_timestamp: GP2 at on air rise * @timestamp: TSF at on air rise * @beacon_time_stamp: beacon at on-air rise * @phy_flags: general phy flags: band, modulation, ... * @channel: channel number * @non_cfg_phy_buf: for various implementations of non_cfg_phy * @rate_n_flags: IWM_RATE_MCS_* * @byte_count: frame's byte-count * @frame_time: frame's time on the air, based on byte count and frame rate * calculation * @mac_active_msk: what MACs were active when the frame was received * * Before each Rx, the device sends this data. It contains PHY information * about the reception of the packet. */ struct iwm_rx_phy_info { uint8_t non_cfg_phy_cnt; uint8_t cfg_phy_cnt; uint8_t stat_id; uint8_t reserved1; uint32_t system_timestamp; uint64_t timestamp; uint32_t beacon_time_stamp; uint16_t phy_flags; #define IWM_PHY_INFO_FLAG_SHPREAMBLE (1 << 2) uint16_t channel; uint32_t non_cfg_phy[IWM_RX_INFO_PHY_CNT]; #if 0 /* OpenBSD update; will need to convert code to use this field */ uint32_t rate_n_flags; #else uint8_t rate; uint8_t rflags; uint16_t xrflags; #endif uint32_t byte_count; uint16_t mac_active_msk; uint16_t frame_time; } __packed; struct iwm_rx_mpdu_res_start { uint16_t byte_count; uint16_t reserved; } __packed; /** * Values to parse %iwm_rx_phy_info phy_flags * @IWM_RX_RES_PHY_FLAGS_BAND_24: true if the packet was received on 2.4 band * @IWM_RX_RES_PHY_FLAGS_MOD_CCK: * @IWM_RX_RES_PHY_FLAGS_SHORT_PREAMBLE: true if packet's preamble was short * @IWM_RX_RES_PHY_FLAGS_NARROW_BAND: * @IWM_RX_RES_PHY_FLAGS_ANTENNA: antenna on which the packet was received * @IWM_RX_RES_PHY_FLAGS_AGG: set if the packet was part of an A-MPDU * @IWM_RX_RES_PHY_FLAGS_OFDM_HT: The frame was an HT frame * @IWM_RX_RES_PHY_FLAGS_OFDM_GF: The frame used GF preamble * @IWM_RX_RES_PHY_FLAGS_OFDM_VHT: The frame was a VHT frame */ #define IWM_RX_RES_PHY_FLAGS_BAND_24 (1 << 0) #define IWM_RX_RES_PHY_FLAGS_MOD_CCK (1 << 1) #define IWM_RX_RES_PHY_FLAGS_SHORT_PREAMBLE (1 << 2) #define IWM_RX_RES_PHY_FLAGS_NARROW_BAND (1 << 3) #define IWM_RX_RES_PHY_FLAGS_ANTENNA (0x7 << 4) #define IWM_RX_RES_PHY_FLAGS_ANTENNA_POS 4 #define IWM_RX_RES_PHY_FLAGS_AGG (1 << 7) #define IWM_RX_RES_PHY_FLAGS_OFDM_HT (1 << 8) #define IWM_RX_RES_PHY_FLAGS_OFDM_GF (1 << 9) #define IWM_RX_RES_PHY_FLAGS_OFDM_VHT (1 << 10) /** * Values written by fw for each Rx packet * @IWM_RX_MPDU_RES_STATUS_CRC_OK: CRC is fine * @IWM_RX_MPDU_RES_STATUS_OVERRUN_OK: there was no RXE overflow * @IWM_RX_MPDU_RES_STATUS_SRC_STA_FOUND: * @IWM_RX_MPDU_RES_STATUS_KEY_VALID: * @IWM_RX_MPDU_RES_STATUS_KEY_PARAM_OK: * @IWM_RX_MPDU_RES_STATUS_ICV_OK: ICV is fine, if not, the packet is destroyed * @IWM_RX_MPDU_RES_STATUS_MIC_OK: used for CCM alg only. TKIP MIC is checked * in the driver. * @IWM_RX_MPDU_RES_STATUS_TTAK_OK: TTAK is fine * @IWM_RX_MPDU_RES_STATUS_MNG_FRAME_REPLAY_ERR: valid for alg = CCM_CMAC or * alg = CCM only. Checks replay attack for 11w frames. Relevant only if * %IWM_RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME is set. * @IWM_RX_MPDU_RES_STATUS_SEC_NO_ENC: this frame is not encrypted * @IWM_RX_MPDU_RES_STATUS_SEC_WEP_ENC: this frame is encrypted using WEP * @IWM_RX_MPDU_RES_STATUS_SEC_CCM_ENC: this frame is encrypted using CCM * @IWM_RX_MPDU_RES_STATUS_SEC_TKIP_ENC: this frame is encrypted using TKIP * @IWM_RX_MPDU_RES_STATUS_SEC_CCM_CMAC_ENC: this frame is encrypted using CCM_CMAC * @IWM_RX_MPDU_RES_STATUS_SEC_ENC_ERR: this frame couldn't be decrypted * @IWM_RX_MPDU_RES_STATUS_SEC_ENC_MSK: bitmask of the encryption algorithm * @IWM_RX_MPDU_RES_STATUS_DEC_DONE: this frame has been successfully decrypted * @IWM_RX_MPDU_RES_STATUS_PROTECT_FRAME_BIT_CMP: * @IWM_RX_MPDU_RES_STATUS_EXT_IV_BIT_CMP: * @IWM_RX_MPDU_RES_STATUS_KEY_ID_CMP_BIT: * @IWM_RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME: this frame is an 11w management frame * @IWM_RX_MPDU_RES_STATUS_HASH_INDEX_MSK: * @IWM_RX_MPDU_RES_STATUS_STA_ID_MSK: * @IWM_RX_MPDU_RES_STATUS_RRF_KILL: * @IWM_RX_MPDU_RES_STATUS_FILTERING_MSK: * @IWM_RX_MPDU_RES_STATUS2_FILTERING_MSK: */ #define IWM_RX_MPDU_RES_STATUS_CRC_OK (1 << 0) #define IWM_RX_MPDU_RES_STATUS_OVERRUN_OK (1 << 1) #define IWM_RX_MPDU_RES_STATUS_SRC_STA_FOUND (1 << 2) #define IWM_RX_MPDU_RES_STATUS_KEY_VALID (1 << 3) #define IWM_RX_MPDU_RES_STATUS_KEY_PARAM_OK (1 << 4) #define IWM_RX_MPDU_RES_STATUS_ICV_OK (1 << 5) #define IWM_RX_MPDU_RES_STATUS_MIC_OK (1 << 6) #define IWM_RX_MPDU_RES_STATUS_TTAK_OK (1 << 7) #define IWM_RX_MPDU_RES_STATUS_MNG_FRAME_REPLAY_ERR (1 << 7) #define IWM_RX_MPDU_RES_STATUS_SEC_NO_ENC (0 << 8) #define IWM_RX_MPDU_RES_STATUS_SEC_WEP_ENC (1 << 8) #define IWM_RX_MPDU_RES_STATUS_SEC_CCM_ENC (2 << 8) #define IWM_RX_MPDU_RES_STATUS_SEC_TKIP_ENC (3 << 8) #define IWM_RX_MPDU_RES_STATUS_SEC_EXT_ENC (4 << 8) #define IWM_RX_MPDU_RES_STATUS_SEC_CCM_CMAC_ENC (6 << 8) #define IWM_RX_MPDU_RES_STATUS_SEC_ENC_ERR (7 << 8) #define IWM_RX_MPDU_RES_STATUS_SEC_ENC_MSK (7 << 8) #define IWM_RX_MPDU_RES_STATUS_DEC_DONE (1 << 11) #define IWM_RX_MPDU_RES_STATUS_PROTECT_FRAME_BIT_CMP (1 << 12) #define IWM_RX_MPDU_RES_STATUS_EXT_IV_BIT_CMP (1 << 13) #define IWM_RX_MPDU_RES_STATUS_KEY_ID_CMP_BIT (1 << 14) #define IWM_RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME (1 << 15) #define IWM_RX_MPDU_RES_STATUS_HASH_INDEX_MSK (0x3F0000) #define IWM_RX_MPDU_RES_STATUS_STA_ID_MSK (0x1f000000) #define IWM_RX_MPDU_RES_STATUS_RRF_KILL (1 << 29) #define IWM_RX_MPDU_RES_STATUS_FILTERING_MSK (0xc00000) #define IWM_RX_MPDU_RES_STATUS2_FILTERING_MSK (0xc0000000) #define IWM_RX_MPDU_MFLG1_ADDRTYPE_MASK 0x03 #define IWM_RX_MPDU_MFLG1_MIC_CRC_LEN_MASK 0xf0 #define IWM_RX_MPDU_MFLG1_MIC_CRC_LEN_SHIFT 3 #define IWM_RX_MPDU_MFLG2_HDR_LEN_MASK 0x1f #define IWM_RX_MPDU_MFLG2_PAD 0x20 #define IWM_RX_MPDU_MFLG2_AMSDU 0x40 #define IWM_RX_MPDU_AMSDU_SUBFRAME_IDX_MASK 0x7f #define IWM_RX_MPDU_AMSDU_LAST_SUBFRAME 0x80 #define IWM_RX_MPDU_PHY_AMPDU (1 << 5) #define IWM_RX_MPDU_PHY_AMPDU_TOGGLE (1 << 6) #define IWM_RX_MPDU_PHY_SHORT_PREAMBLE (1 << 7) #define IWM_RX_MPDU_PHY_NCCK_ADDTL_NTFY (1 << 7) #define IWM_RX_MPDU_PHY_TSF_OVERLOAD (1 << 8) struct iwm_rx_mpdu_desc_v1 { union { uint32_t rss_hash; uint32_t phy_data2; }; union { uint32_t filter_match; uint32_t phy_data3; }; uint32_t rate_n_flags; uint8_t energy_a; uint8_t energy_b; uint8_t channel; uint8_t mac_context; uint32_t gp2_on_air_rise; union { uint64_t tsf_on_air_rise; struct { uint32_t phy_data0; uint32_t phy_data1; }; }; } __packed; #define IWM_RX_REORDER_DATA_INVALID_BAID 0x7f #define IWM_RX_MPDU_REORDER_NSSN_MASK 0x00000fff #define IWM_RX_MPDU_REORDER_SN_MASK 0x00fff000 #define IWM_RX_MPDU_REORDER_SN_SHIFT 12 #define IWM_RX_MPDU_REORDER_BAID_MASK 0x7f000000 #define IWM_RX_MPDU_REORDER_BAID_SHIFT 24 #define IWM_RX_MPDU_REORDER_BA_OLD_SN 0x80000000 struct iwm_rx_mpdu_desc { uint16_t mpdu_len; uint8_t mac_flags1; uint8_t mac_flags2; uint8_t amsdu_info; uint16_t phy_info; uint8_t mac_phy_idx; uint16_t raw_csum; union { uint16_t l3l4_flags; uint16_t phy_data4; }; uint16_t status; uint8_t hash_filter; uint8_t sta_id_flags; uint32_t reorder_data; struct iwm_rx_mpdu_desc_v1 v1; } __packed; /** * struct iwm_radio_version_notif - information on the radio version * ( IWM_RADIO_VERSION_NOTIFICATION = 0x68 ) * @radio_flavor: * @radio_step: * @radio_dash: */ struct iwm_radio_version_notif { uint32_t radio_flavor; uint32_t radio_step; uint32_t radio_dash; } __packed; /* IWM_RADIO_VERSION_NOTOFICATION_S_VER_1 */ #define IWM_CARD_ENABLED 0x00 #define IWM_HW_CARD_DISABLED 0x01 #define IWM_SW_CARD_DISABLED 0x02 #define IWM_CT_KILL_CARD_DISABLED 0x04 #define IWM_HALT_CARD_DISABLED 0x08 #define IWM_CARD_DISABLED_MSK 0x0f #define IWM_CARD_IS_RX_ON 0x10 /** * struct iwm_radio_version_notif - information on the radio version * (IWM_CARD_STATE_NOTIFICATION = 0xa1 ) * @flags: %iwm_card_state_flags */ struct iwm_card_state_notif { uint32_t flags; } __packed; /* CARD_STATE_NTFY_API_S_VER_1 */ /** * struct iwm_missed_beacons_notif - information on missed beacons * ( IWM_MISSED_BEACONS_NOTIFICATION = 0xa2 ) * @mac_id: interface ID * @consec_missed_beacons_since_last_rx: number of consecutive missed * beacons since last RX. * @consec_missed_beacons: number of consecutive missed beacons * @num_expected_beacons: * @num_recvd_beacons: */ struct iwm_missed_beacons_notif { uint32_t mac_id; uint32_t consec_missed_beacons_since_last_rx; uint32_t consec_missed_beacons; uint32_t num_expected_beacons; uint32_t num_recvd_beacons; } __packed; /* IWM_MISSED_BEACON_NTFY_API_S_VER_3 */ /** * struct iwm_mfuart_load_notif - mfuart image version & status * ( IWM_MFUART_LOAD_NOTIFICATION = 0xb1 ) * @installed_ver: installed image version * @external_ver: external image version * @status: MFUART loading status * @duration: MFUART loading time */ struct iwm_mfuart_load_notif { uint32_t installed_ver; uint32_t external_ver; uint32_t status; uint32_t duration; } __packed; /*MFU_LOADER_NTFY_API_S_VER_1*/ /** * struct iwm_set_calib_default_cmd - set default value for calibration. * ( IWM_SET_CALIB_DEFAULT_CMD = 0x8e ) * @calib_index: the calibration to set value for * @length: of data * @data: the value to set for the calibration result */ struct iwm_set_calib_default_cmd { uint16_t calib_index; uint16_t length; uint8_t data[0]; } __packed; /* IWM_PHY_CALIB_OVERRIDE_VALUES_S */ #define IWM_MAX_PORT_ID_NUM 2 #define IWM_MAX_MCAST_FILTERING_ADDRESSES 256 /** * struct iwm_mcast_filter_cmd - configure multicast filter. * @filter_own: Set 1 to filter out multicast packets sent by station itself * @port_id: Multicast MAC addresses array specifier. This is a strange way * to identify network interface adopted in host-device IF. * It is used by FW as index in array of addresses. This array has * IWM_MAX_PORT_ID_NUM members. * @count: Number of MAC addresses in the array * @pass_all: Set 1 to pass all multicast packets. * @bssid: current association BSSID. * @addr_list: Place holder for array of MAC addresses. * IMPORTANT: add padding if necessary to ensure DWORD alignment. */ struct iwm_mcast_filter_cmd { uint8_t filter_own; uint8_t port_id; uint8_t count; uint8_t pass_all; uint8_t bssid[6]; uint8_t reserved[2]; uint8_t addr_list[0]; } __packed; /* IWM_MCAST_FILTERING_CMD_API_S_VER_1 */ struct iwm_statistics_dbg { uint32_t burst_check; uint32_t burst_count; uint32_t wait_for_silence_timeout_cnt; uint32_t reserved[3]; } __packed; /* IWM_STATISTICS_DEBUG_API_S_VER_2 */ struct iwm_statistics_div { uint32_t tx_on_a; uint32_t tx_on_b; uint32_t exec_time; uint32_t probe_time; uint32_t rssi_ant; uint32_t reserved2; } __packed; /* IWM_STATISTICS_SLOW_DIV_API_S_VER_2 */ struct iwm_statistics_general_common { uint32_t temperature; /* radio temperature */ uint32_t temperature_m; /* radio voltage */ struct iwm_statistics_dbg dbg; uint32_t sleep_time; uint32_t slots_out; uint32_t slots_idle; uint32_t ttl_timestamp; struct iwm_statistics_div div; uint32_t rx_enable_counter; /* * num_of_sos_states: * count the number of times we have to re-tune * in order to get out of bad PHY status */ uint32_t num_of_sos_states; } __packed; /* IWM_STATISTICS_GENERAL_API_S_VER_5 */ struct iwm_statistics_rx_non_phy { uint32_t bogus_cts; /* CTS received when not expecting CTS */ uint32_t bogus_ack; /* ACK received when not expecting ACK */ uint32_t non_bssid_frames; /* number of frames with BSSID that * doesn't belong to the STA BSSID */ uint32_t filtered_frames; /* count frames that were dumped in the * filtering process */ uint32_t non_channel_beacons; /* beacons with our bss id but not on * our serving channel */ uint32_t channel_beacons; /* beacons with our bss id and in our * serving channel */ uint32_t num_missed_bcon; /* number of missed beacons */ uint32_t adc_rx_saturation_time; /* count in 0.8us units the time the * ADC was in saturation */ uint32_t ina_detection_search_time;/* total time (in 0.8us) searched * for INA */ uint32_t beacon_silence_rssi[3];/* RSSI silence after beacon frame */ uint32_t interference_data_flag; /* flag for interference data * availability. 1 when data is * available. */ uint32_t channel_load; /* counts RX Enable time in uSec */ uint32_t dsp_false_alarms; /* DSP false alarm (both OFDM * and CCK) counter */ uint32_t beacon_rssi_a; uint32_t beacon_rssi_b; uint32_t beacon_rssi_c; uint32_t beacon_energy_a; uint32_t beacon_energy_b; uint32_t beacon_energy_c; uint32_t num_bt_kills; uint32_t mac_id; uint32_t directed_data_mpdu; } __packed; /* IWM_STATISTICS_RX_NON_PHY_API_S_VER_3 */ struct iwm_statistics_rx_phy { uint32_t ina_cnt; uint32_t fina_cnt; uint32_t plcp_err; uint32_t crc32_err; uint32_t overrun_err; uint32_t early_overrun_err; uint32_t crc32_good; uint32_t false_alarm_cnt; uint32_t fina_sync_err_cnt; uint32_t sfd_timeout; uint32_t fina_timeout; uint32_t unresponded_rts; uint32_t rxe_frame_limit_overrun; uint32_t sent_ack_cnt; uint32_t sent_cts_cnt; uint32_t sent_ba_rsp_cnt; uint32_t dsp_self_kill; uint32_t mh_format_err; uint32_t re_acq_main_rssi_sum; uint32_t reserved; } __packed; /* IWM_STATISTICS_RX_PHY_API_S_VER_2 */ struct iwm_statistics_rx_ht_phy { uint32_t plcp_err; uint32_t overrun_err; uint32_t early_overrun_err; uint32_t crc32_good; uint32_t crc32_err; uint32_t mh_format_err; uint32_t agg_crc32_good; uint32_t agg_mpdu_cnt; uint32_t agg_cnt; uint32_t unsupport_mcs; } __packed; /* IWM_STATISTICS_HT_RX_PHY_API_S_VER_1 */ #define IWM_MAX_CHAINS 3 struct iwm_statistics_tx_non_phy_agg { uint32_t ba_timeout; uint32_t ba_reschedule_frames; uint32_t scd_query_agg_frame_cnt; uint32_t scd_query_no_agg; uint32_t scd_query_agg; uint32_t scd_query_mismatch; uint32_t frame_not_ready; uint32_t underrun; uint32_t bt_prio_kill; uint32_t rx_ba_rsp_cnt; int8_t txpower[IWM_MAX_CHAINS]; int8_t reserved; uint32_t reserved2; } __packed; /* IWM_STATISTICS_TX_NON_PHY_AGG_API_S_VER_1 */ struct iwm_statistics_tx_channel_width { uint32_t ext_cca_narrow_ch20[1]; uint32_t ext_cca_narrow_ch40[2]; uint32_t ext_cca_narrow_ch80[3]; uint32_t ext_cca_narrow_ch160[4]; uint32_t last_tx_ch_width_indx; uint32_t rx_detected_per_ch_width[4]; uint32_t success_per_ch_width[4]; uint32_t fail_per_ch_width[4]; }; /* IWM_STATISTICS_TX_CHANNEL_WIDTH_API_S_VER_1 */ struct iwm_statistics_tx { uint32_t preamble_cnt; uint32_t rx_detected_cnt; uint32_t bt_prio_defer_cnt; uint32_t bt_prio_kill_cnt; uint32_t few_bytes_cnt; uint32_t cts_timeout; uint32_t ack_timeout; uint32_t expected_ack_cnt; uint32_t actual_ack_cnt; uint32_t dump_msdu_cnt; uint32_t burst_abort_next_frame_mismatch_cnt; uint32_t burst_abort_missing_next_frame_cnt; uint32_t cts_timeout_collision; uint32_t ack_or_ba_timeout_collision; struct iwm_statistics_tx_non_phy_agg agg; struct iwm_statistics_tx_channel_width channel_width; } __packed; /* IWM_STATISTICS_TX_API_S_VER_4 */ struct iwm_statistics_bt_activity { uint32_t hi_priority_tx_req_cnt; uint32_t hi_priority_tx_denied_cnt; uint32_t lo_priority_tx_req_cnt; uint32_t lo_priority_tx_denied_cnt; uint32_t hi_priority_rx_req_cnt; uint32_t hi_priority_rx_denied_cnt; uint32_t lo_priority_rx_req_cnt; uint32_t lo_priority_rx_denied_cnt; } __packed; /* IWM_STATISTICS_BT_ACTIVITY_API_S_VER_1 */ struct iwm_statistics_general { struct iwm_statistics_general_common common; uint32_t beacon_filtered; uint32_t missed_beacons; int8_t beacon_filter_average_energy; int8_t beacon_filter_reason; int8_t beacon_filter_current_energy; int8_t beacon_filter_reserved; uint32_t beacon_filter_delta_time; struct iwm_statistics_bt_activity bt_activity; } __packed; /* IWM_STATISTICS_GENERAL_API_S_VER_5 */ struct iwm_statistics_rx { struct iwm_statistics_rx_phy ofdm; struct iwm_statistics_rx_phy cck; struct iwm_statistics_rx_non_phy general; struct iwm_statistics_rx_ht_phy ofdm_ht; } __packed; /* IWM_STATISTICS_RX_API_S_VER_3 */ /* * IWM_STATISTICS_NOTIFICATION = 0x9d (notification only, not a command) * * By default, uCode issues this notification after receiving a beacon * while associated. To disable this behavior, set DISABLE_NOTIF flag in the * IWM_REPLY_STATISTICS_CMD 0x9c, above. * * Statistics counters continue to increment beacon after beacon, but are * cleared when changing channels or when driver issues IWM_REPLY_STATISTICS_CMD * 0x9c with CLEAR_STATS bit set (see above). * * uCode also issues this notification during scans. uCode clears statistics * appropriately so that each notification contains statistics for only the * one channel that has just been scanned. */ struct iwm_notif_statistics { /* IWM_STATISTICS_NTFY_API_S_VER_8 */ uint32_t flag; struct iwm_statistics_rx rx; struct iwm_statistics_tx tx; struct iwm_statistics_general general; } __packed; /*********************************** * Smart Fifo API ***********************************/ /* Smart Fifo state */ enum iwm_sf_state { IWM_SF_LONG_DELAY_ON = 0, /* should never be called by driver */ IWM_SF_FULL_ON, IWM_SF_UNINIT, IWM_SF_INIT_OFF, IWM_SF_HW_NUM_STATES }; /* Smart Fifo possible scenario */ enum iwm_sf_scenario { IWM_SF_SCENARIO_SINGLE_UNICAST, IWM_SF_SCENARIO_AGG_UNICAST, IWM_SF_SCENARIO_MULTICAST, IWM_SF_SCENARIO_BA_RESP, IWM_SF_SCENARIO_TX_RESP, IWM_SF_NUM_SCENARIO }; #define IWM_SF_TRANSIENT_STATES_NUMBER 2 /* IWM_SF_LONG_DELAY_ON and IWM_SF_FULL_ON */ #define IWM_SF_NUM_TIMEOUT_TYPES 2 /* Aging timer and Idle timer */ /* smart FIFO default values */ #define IWM_SF_W_MARK_SISO 4096 #define IWM_SF_W_MARK_MIMO2 8192 #define IWM_SF_W_MARK_MIMO3 6144 #define IWM_SF_W_MARK_LEGACY 4096 #define IWM_SF_W_MARK_SCAN 4096 /* SF Scenarios timers for default configuration (aligned to 32 uSec) */ #define IWM_SF_SINGLE_UNICAST_IDLE_TIMER_DEF 160 /* 150 uSec */ #define IWM_SF_SINGLE_UNICAST_AGING_TIMER_DEF 400 /* 0.4 mSec */ #define IWM_SF_AGG_UNICAST_IDLE_TIMER_DEF 160 /* 150 uSec */ #define IWM_SF_AGG_UNICAST_AGING_TIMER_DEF 400 /* 0.4 mSec */ #define IWM_SF_MCAST_IDLE_TIMER_DEF 160 /* 150 mSec */ #define IWM_SF_MCAST_AGING_TIMER_DEF 400 /* 0.4 mSec */ #define IWM_SF_BA_IDLE_TIMER_DEF 160 /* 150 uSec */ #define IWM_SF_BA_AGING_TIMER_DEF 400 /* 0.4 mSec */ #define IWM_SF_TX_RE_IDLE_TIMER_DEF 160 /* 150 uSec */ #define IWM_SF_TX_RE_AGING_TIMER_DEF 400 /* 0.4 mSec */ /* SF Scenarios timers for FULL_ON state (aligned to 32 uSec) */ #define IWM_SF_SINGLE_UNICAST_IDLE_TIMER 320 /* 300 uSec */ #define IWM_SF_SINGLE_UNICAST_AGING_TIMER 2016 /* 2 mSec */ #define IWM_SF_AGG_UNICAST_IDLE_TIMER 320 /* 300 uSec */ #define IWM_SF_AGG_UNICAST_AGING_TIMER 2016 /* 2 mSec */ #define IWM_SF_MCAST_IDLE_TIMER 2016 /* 2 mSec */ #define IWM_SF_MCAST_AGING_TIMER 10016 /* 10 mSec */ #define IWM_SF_BA_IDLE_TIMER 320 /* 300 uSec */ #define IWM_SF_BA_AGING_TIMER 2016 /* 2 mSec */ #define IWM_SF_TX_RE_IDLE_TIMER 320 /* 300 uSec */ #define IWM_SF_TX_RE_AGING_TIMER 2016 /* 2 mSec */ #define IWM_SF_LONG_DELAY_AGING_TIMER 1000000 /* 1 Sec */ #define IWM_SF_CFG_DUMMY_NOTIF_OFF (1 << 16) /** * Smart Fifo configuration command. * @state: smart fifo state, types listed in enum %iwm_sf_state. * @watermark: Minimum allowed available free space in RXF for transient state. * @long_delay_timeouts: aging and idle timer values for each scenario * in long delay state. * @full_on_timeouts: timer values for each scenario in full on state. */ struct iwm_sf_cfg_cmd { uint32_t state; uint32_t watermark[IWM_SF_TRANSIENT_STATES_NUMBER]; uint32_t long_delay_timeouts[IWM_SF_NUM_SCENARIO][IWM_SF_NUM_TIMEOUT_TYPES]; uint32_t full_on_timeouts[IWM_SF_NUM_SCENARIO][IWM_SF_NUM_TIMEOUT_TYPES]; } __packed; /* IWM_SF_CFG_API_S_VER_2 */ /* * END mvm/fw-api.h */ /* * BEGIN mvm/fw-api-mac.h */ /* * The first MAC indices (starting from 0) * are available to the driver, AUX follows */ #define IWM_MAC_INDEX_AUX 4 #define IWM_MAC_INDEX_MIN_DRIVER 0 #define IWM_NUM_MAC_INDEX_DRIVER IWM_MAC_INDEX_AUX #define IWM_AC_BK 0 #define IWM_AC_BE 1 #define IWM_AC_VI 2 #define IWM_AC_VO 3 #define IWM_AC_NUM 4 /** * MAC context flags * @IWM_MAC_PROT_FLG_TGG_PROTECT: 11g protection when transmitting OFDM frames, * this will require CCK RTS/CTS2self. * RTS/CTS will protect full burst time. * @IWM_MAC_PROT_FLG_HT_PROT: enable HT protection * @IWM_MAC_PROT_FLG_FAT_PROT: protect 40 MHz transmissions * @IWM_MAC_PROT_FLG_SELF_CTS_EN: allow CTS2self */ #define IWM_MAC_PROT_FLG_TGG_PROTECT (1 << 3) #define IWM_MAC_PROT_FLG_HT_PROT (1 << 23) #define IWM_MAC_PROT_FLG_FAT_PROT (1 << 24) #define IWM_MAC_PROT_FLG_SELF_CTS_EN (1 << 30) #define IWM_MAC_FLG_SHORT_SLOT (1 << 4) #define IWM_MAC_FLG_SHORT_PREAMBLE (1 << 5) /** * Supported MAC types * @IWM_FW_MAC_TYPE_FIRST: lowest supported MAC type * @IWM_FW_MAC_TYPE_AUX: Auxiliary MAC (internal) * @IWM_FW_MAC_TYPE_LISTENER: monitor MAC type (?) * @IWM_FW_MAC_TYPE_PIBSS: Pseudo-IBSS * @IWM_FW_MAC_TYPE_IBSS: IBSS * @IWM_FW_MAC_TYPE_BSS_STA: BSS (managed) station * @IWM_FW_MAC_TYPE_P2P_DEVICE: P2P Device * @IWM_FW_MAC_TYPE_P2P_STA: P2P client * @IWM_FW_MAC_TYPE_GO: P2P GO * @IWM_FW_MAC_TYPE_TEST: ? * @IWM_FW_MAC_TYPE_MAX: highest support MAC type */ #define IWM_FW_MAC_TYPE_FIRST 1 #define IWM_FW_MAC_TYPE_AUX IWM_FW_MAC_TYPE_FIRST #define IWM_FW_MAC_TYPE_LISTENER 2 #define IWM_FW_MAC_TYPE_PIBSS 3 #define IWM_FW_MAC_TYPE_IBSS 4 #define IWM_FW_MAC_TYPE_BSS_STA 5 #define IWM_FW_MAC_TYPE_P2P_DEVICE 6 #define IWM_FW_MAC_TYPE_P2P_STA 7 #define IWM_FW_MAC_TYPE_GO 8 #define IWM_FW_MAC_TYPE_TEST 9 #define IWM_FW_MAC_TYPE_MAX IWM_FW_MAC_TYPE_TEST /* IWM_MAC_CONTEXT_TYPE_API_E_VER_1 */ /** * TSF hw timer ID * @IWM_TSF_ID_A: use TSF A * @IWM_TSF_ID_B: use TSF B * @IWM_TSF_ID_C: use TSF C * @IWM_TSF_ID_D: use TSF D * @IWM_NUM_TSF_IDS: number of TSF timers available */ #define IWM_TSF_ID_A 0 #define IWM_TSF_ID_B 1 #define IWM_TSF_ID_C 2 #define IWM_TSF_ID_D 3 #define IWM_NUM_TSF_IDS 4 /* IWM_TSF_ID_API_E_VER_1 */ /** * struct iwm_mac_data_ap - configuration data for AP MAC context * @beacon_time: beacon transmit time in system time * @beacon_tsf: beacon transmit time in TSF * @bi: beacon interval in TU * @bi_reciprocal: 2^32 / bi * @dtim_interval: dtim transmit time in TU * @dtim_reciprocal: 2^32 / dtim_interval * @mcast_qid: queue ID for multicast traffic * NOTE: obsolete from VER2 and on * @beacon_template: beacon template ID */ struct iwm_mac_data_ap { uint32_t beacon_time; uint64_t beacon_tsf; uint32_t bi; uint32_t bi_reciprocal; uint32_t dtim_interval; uint32_t dtim_reciprocal; uint32_t mcast_qid; uint32_t beacon_template; } __packed; /* AP_MAC_DATA_API_S_VER_2 */ /** * struct iwm_mac_data_ibss - configuration data for IBSS MAC context * @beacon_time: beacon transmit time in system time * @beacon_tsf: beacon transmit time in TSF * @bi: beacon interval in TU * @bi_reciprocal: 2^32 / bi * @beacon_template: beacon template ID */ struct iwm_mac_data_ibss { uint32_t beacon_time; uint64_t beacon_tsf; uint32_t bi; uint32_t bi_reciprocal; uint32_t beacon_template; } __packed; /* IBSS_MAC_DATA_API_S_VER_1 */ /** * struct iwm_mac_data_sta - configuration data for station MAC context * @is_assoc: 1 for associated state, 0 otherwise * @dtim_time: DTIM arrival time in system time * @dtim_tsf: DTIM arrival time in TSF * @bi: beacon interval in TU, applicable only when associated * @bi_reciprocal: 2^32 / bi , applicable only when associated * @dtim_interval: DTIM interval in TU, applicable only when associated * @dtim_reciprocal: 2^32 / dtim_interval , applicable only when associated * @listen_interval: in beacon intervals, applicable only when associated * @assoc_id: unique ID assigned by the AP during association */ struct iwm_mac_data_sta { uint32_t is_assoc; uint32_t dtim_time; uint64_t dtim_tsf; uint32_t bi; uint32_t bi_reciprocal; uint32_t dtim_interval; uint32_t dtim_reciprocal; uint32_t listen_interval; uint32_t assoc_id; uint32_t assoc_beacon_arrive_time; } __packed; /* IWM_STA_MAC_DATA_API_S_VER_1 */ /** * struct iwm_mac_data_go - configuration data for P2P GO MAC context * @ap: iwm_mac_data_ap struct with most config data * @ctwin: client traffic window in TU (period after TBTT when GO is present). * 0 indicates that there is no CT window. * @opp_ps_enabled: indicate that opportunistic PS allowed */ struct iwm_mac_data_go { struct iwm_mac_data_ap ap; uint32_t ctwin; uint32_t opp_ps_enabled; } __packed; /* GO_MAC_DATA_API_S_VER_1 */ /** * struct iwm_mac_data_p2p_sta - configuration data for P2P client MAC context * @sta: iwm_mac_data_sta struct with most config data * @ctwin: client traffic window in TU (period after TBTT when GO is present). * 0 indicates that there is no CT window. */ struct iwm_mac_data_p2p_sta { struct iwm_mac_data_sta sta; uint32_t ctwin; } __packed; /* P2P_STA_MAC_DATA_API_S_VER_1 */ /** * struct iwm_mac_data_pibss - Pseudo IBSS config data * @stats_interval: interval in TU between statistics notifications to host. */ struct iwm_mac_data_pibss { uint32_t stats_interval; } __packed; /* PIBSS_MAC_DATA_API_S_VER_1 */ /* * struct iwm_mac_data_p2p_dev - configuration data for the P2P Device MAC * context. * @is_disc_extended: if set to true, P2P Device discoverability is enabled on * other channels as well. This should be to true only in case that the * device is discoverable and there is an active GO. Note that setting this * field when not needed, will increase the number of interrupts and have * effect on the platform power, as this setting opens the Rx filters on * all macs. */ struct iwm_mac_data_p2p_dev { uint32_t is_disc_extended; } __packed; /* _P2P_DEV_MAC_DATA_API_S_VER_1 */ /** * MAC context filter flags * @IWM_MAC_FILTER_IN_PROMISC: accept all data frames * @IWM_MAC_FILTER_IN_CONTROL_AND_MGMT: pass all mangement and * control frames to the host * @IWM_MAC_FILTER_ACCEPT_GRP: accept multicast frames * @IWM_MAC_FILTER_DIS_DECRYPT: don't decrypt unicast frames * @IWM_MAC_FILTER_DIS_GRP_DECRYPT: don't decrypt multicast frames * @IWM_MAC_FILTER_IN_BEACON: transfer foreign BSS's beacons to host * (in station mode when associated) * @IWM_MAC_FILTER_OUT_BCAST: filter out all broadcast frames * @IWM_MAC_FILTER_IN_CRC32: extract FCS and append it to frames * @IWM_MAC_FILTER_IN_PROBE_REQUEST: pass probe requests to host */ #define IWM_MAC_FILTER_IN_PROMISC (1 << 0) #define IWM_MAC_FILTER_IN_CONTROL_AND_MGMT (1 << 1) #define IWM_MAC_FILTER_ACCEPT_GRP (1 << 2) #define IWM_MAC_FILTER_DIS_DECRYPT (1 << 3) #define IWM_MAC_FILTER_DIS_GRP_DECRYPT (1 << 4) #define IWM_MAC_FILTER_IN_BEACON (1 << 6) #define IWM_MAC_FILTER_OUT_BCAST (1 << 8) #define IWM_MAC_FILTER_IN_CRC32 (1 << 11) #define IWM_MAC_FILTER_IN_PROBE_REQUEST (1 << 12) /** * QoS flags * @IWM_MAC_QOS_FLG_UPDATE_EDCA: ? * @IWM_MAC_QOS_FLG_TGN: HT is enabled * @IWM_MAC_QOS_FLG_TXOP_TYPE: ? * */ #define IWM_MAC_QOS_FLG_UPDATE_EDCA (1 << 0) #define IWM_MAC_QOS_FLG_TGN (1 << 1) #define IWM_MAC_QOS_FLG_TXOP_TYPE (1 << 4) /** * struct iwm_ac_qos - QOS timing params for IWM_MAC_CONTEXT_CMD * @cw_min: Contention window, start value in numbers of slots. * Should be a power-of-2, minus 1. Device's default is 0x0f. * @cw_max: Contention window, max value in numbers of slots. * Should be a power-of-2, minus 1. Device's default is 0x3f. * @aifsn: Number of slots in Arbitration Interframe Space (before * performing random backoff timing prior to Tx). Device default 1. * @fifos_mask: FIFOs used by this MAC for this AC * @edca_txop: Length of Tx opportunity, in uSecs. Device default is 0. * * One instance of this config struct for each of 4 EDCA access categories * in struct iwm_qosparam_cmd. * * Device will automatically increase contention window by (2*CW) + 1 for each * transmission retry. Device uses cw_max as a bit mask, ANDed with new CW * value, to cap the CW value. */ struct iwm_ac_qos { uint16_t cw_min; uint16_t cw_max; uint8_t aifsn; uint8_t fifos_mask; uint16_t edca_txop; } __packed; /* IWM_AC_QOS_API_S_VER_2 */ /** * struct iwm_mac_ctx_cmd - command structure to configure MAC contexts * ( IWM_MAC_CONTEXT_CMD = 0x28 ) * @id_and_color: ID and color of the MAC * @action: action to perform, one of IWM_FW_CTXT_ACTION_* * @mac_type: one of IWM_FW_MAC_TYPE_* * @tsf_id: TSF HW timer, one of IWM_TSF_ID_* * @node_addr: MAC address * @bssid_addr: BSSID * @cck_rates: basic rates available for CCK * @ofdm_rates: basic rates available for OFDM * @protection_flags: combination of IWM_MAC_PROT_FLG_FLAG_* * @cck_short_preamble: 0x20 for enabling short preamble, 0 otherwise * @short_slot: 0x10 for enabling short slots, 0 otherwise * @filter_flags: combination of IWM_MAC_FILTER_* * @qos_flags: from IWM_MAC_QOS_FLG_* * @ac: one iwm_mac_qos configuration for each AC * @mac_specific: one of struct iwm_mac_data_*, according to mac_type */ struct iwm_mac_ctx_cmd { /* COMMON_INDEX_HDR_API_S_VER_1 */ uint32_t id_and_color; uint32_t action; /* IWM_MAC_CONTEXT_COMMON_DATA_API_S_VER_1 */ uint32_t mac_type; uint32_t tsf_id; uint8_t node_addr[6]; uint16_t reserved_for_node_addr; uint8_t bssid_addr[6]; uint16_t reserved_for_bssid_addr; uint32_t cck_rates; uint32_t ofdm_rates; uint32_t protection_flags; uint32_t cck_short_preamble; uint32_t short_slot; uint32_t filter_flags; /* IWM_MAC_QOS_PARAM_API_S_VER_1 */ uint32_t qos_flags; struct iwm_ac_qos ac[IWM_AC_NUM+1]; /* IWM_MAC_CONTEXT_COMMON_DATA_API_S */ union { struct iwm_mac_data_ap ap; struct iwm_mac_data_go go; struct iwm_mac_data_sta sta; struct iwm_mac_data_p2p_sta p2p_sta; struct iwm_mac_data_p2p_dev p2p_dev; struct iwm_mac_data_pibss pibss; struct iwm_mac_data_ibss ibss; }; } __packed; /* IWM_MAC_CONTEXT_CMD_API_S_VER_1 */ static inline uint32_t iwm_reciprocal(uint32_t v) { if (!v) return 0; return 0xFFFFFFFF / v; } #define IWM_NONQOS_SEQ_GET 0x1 #define IWM_NONQOS_SEQ_SET 0x2 struct iwm_nonqos_seq_query_cmd { uint32_t get_set_flag; uint32_t mac_id_n_color; uint16_t value; uint16_t reserved; } __packed; /* IWM_NON_QOS_TX_COUNTER_GET_SET_API_S_VER_1 */ /* * END mvm/fw-api-mac.h */ /* * BEGIN mvm/fw-api-power.h */ /* Power Management Commands, Responses, Notifications */ /** * masks for LTR config command flags * @IWM_LTR_CFG_FLAG_FEATURE_ENABLE: Feature operational status * @IWM_LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS: allow LTR change on shadow * memory access * @IWM_LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH: allow LTR msg send on ANY LTR * reg change * @IWM_LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3: allow LTR msg send on transition from * D0 to D3 * @IWM_LTR_CFG_FLAG_SW_SET_SHORT: fixed static short LTR register * @IWM_LTR_CFG_FLAG_SW_SET_LONG: fixed static short LONG register * @IWM_LTR_CFG_FLAG_DENIE_C10_ON_PD: allow going into C10 on PD */ #define IWM_LTR_CFG_FLAG_FEATURE_ENABLE 0x00000001 #define IWM_LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS 0x00000002 #define IWM_LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH 0x00000004 #define IWM_LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3 0x00000008 #define IWM_LTR_CFG_FLAG_SW_SET_SHORT 0x00000010 #define IWM_LTR_CFG_FLAG_SW_SET_LONG 0x00000020 #define IWM_LTR_CFG_FLAG_DENIE_C10_ON_PD 0x00000040 /** * struct iwm_ltr_config_cmd_v1 - configures the LTR * @flags: See %enum iwm_ltr_config_flags */ struct iwm_ltr_config_cmd_v1 { uint32_t flags; uint32_t static_long; uint32_t static_short; } __packed; /* LTR_CAPABLE_API_S_VER_1 */ #define IWM_LTR_VALID_STATES_NUM 4 /** * struct iwm_ltr_config_cmd - configures the LTR * @flags: See %enum iwm_ltr_config_flags * @static_long: * @static_short: * @ltr_cfg_values: * @ltr_short_idle_timeout: */ struct iwm_ltr_config_cmd { uint32_t flags; uint32_t static_long; uint32_t static_short; uint32_t ltr_cfg_values[IWM_LTR_VALID_STATES_NUM]; uint32_t ltr_short_idle_timeout; } __packed; /* LTR_CAPABLE_API_S_VER_2 */ /* Radio LP RX Energy Threshold measured in dBm */ #define IWM_POWER_LPRX_RSSI_THRESHOLD 75 #define IWM_POWER_LPRX_RSSI_THRESHOLD_MAX 94 #define IWM_POWER_LPRX_RSSI_THRESHOLD_MIN 30 /** * Masks for iwm_mac_power_cmd command flags * @IWM_POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off * receiver and transmitter. '0' - does not allow. * @IWM_POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK: '0' Driver disables power management, * '1' Driver enables PM (use rest of parameters) * @IWM_POWER_FLAGS_SKIP_OVER_DTIM_MSK: '0' PM have to walk up every DTIM, * '1' PM could sleep over DTIM till listen Interval. * @IWM_POWER_FLAGS_SNOOZE_ENA_MSK: Enable snoozing only if uAPSD is enabled and all * access categories are both delivery and trigger enabled. * @IWM_POWER_FLAGS_BT_SCO_ENA: Enable BT SCO coex only if uAPSD and * PBW Snoozing enabled * @IWM_POWER_FLAGS_ADVANCE_PM_ENA_MSK: Advanced PM (uAPSD) enable mask * @IWM_POWER_FLAGS_LPRX_ENA_MSK: Low Power RX enable. * @IWM_POWER_FLAGS_AP_UAPSD_MISBEHAVING_ENA_MSK: AP/GO's uAPSD misbehaving * detection enablement */ #define IWM_POWER_FLAGS_POWER_SAVE_ENA_MSK (1 << 0) #define IWM_POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK (1 << 1) #define IWM_POWER_FLAGS_SKIP_OVER_DTIM_MSK (1 << 2) #define IWM_POWER_FLAGS_SNOOZE_ENA_MSK (1 << 5) #define IWM_POWER_FLAGS_BT_SCO_ENA (1 << 8) #define IWM_POWER_FLAGS_ADVANCE_PM_ENA_MSK (1 << 9) #define IWM_POWER_FLAGS_LPRX_ENA_MSK (1 << 11) #define IWM_POWER_FLAGS_UAPSD_MISBEHAVING_ENA_MSK (1 << 12) #define IWM_POWER_VEC_SIZE 5 /** * Masks for device power command flags * @IWM_DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK: * '1' Allow to save power by turning off receiver and transmitter. * '0' Do not allow. This flag should be always set to '1' unless * one needs to disable actual power down for debug purposes. * @IWM_DEVICE_POWER_FLAGS_CAM_MSK: * '1' CAM (Continuous Active Mode) is set, power management is disabled. * '0' Power management is enabled, one of the power schemes is applied. */ #define IWM_DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK (1 << 0) #define IWM_DEVICE_POWER_FLAGS_CAM_MSK (1 << 13) /** * struct iwm_device_power_cmd - device wide power command. * IWM_POWER_TABLE_CMD = 0x77 (command, has simple generic response) * * @flags: Power table command flags from IWM_DEVICE_POWER_FLAGS_* */ struct iwm_device_power_cmd { /* PM_POWER_TABLE_CMD_API_S_VER_6 */ uint16_t flags; uint16_t reserved; } __packed; /** * struct iwm_mac_power_cmd - New power command containing uAPSD support * IWM_MAC_PM_POWER_TABLE = 0xA9 (command, has simple generic response) * @id_and_color: MAC contex identifier * @flags: Power table command flags from POWER_FLAGS_* * @keep_alive_seconds: Keep alive period in seconds. Default - 25 sec. * Minimum allowed:- 3 * DTIM. Keep alive period must be * set regardless of power scheme or current power state. * FW use this value also when PM is disabled. * @rx_data_timeout: Minimum time (usec) from last Rx packet for AM to * PSM transition - legacy PM * @tx_data_timeout: Minimum time (usec) from last Tx packet for AM to * PSM transition - legacy PM * @sleep_interval: not in use * @skip_dtim_periods: Number of DTIM periods to skip if Skip over DTIM flag * is set. For example, if it is required to skip over * one DTIM, this value need to be set to 2 (DTIM periods). * @rx_data_timeout_uapsd: Minimum time (usec) from last Rx packet for AM to * PSM transition - uAPSD * @tx_data_timeout_uapsd: Minimum time (usec) from last Tx packet for AM to * PSM transition - uAPSD * @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled. * Default: 80dbm * @num_skip_dtim: Number of DTIMs to skip if Skip over DTIM flag is set * @snooze_interval: Maximum time between attempts to retrieve buffered data * from the AP [msec] * @snooze_window: A window of time in which PBW snoozing insures that all * packets received. It is also the minimum time from last * received unicast RX packet, before client stops snoozing * for data. [msec] * @snooze_step: TBD * @qndp_tid: TID client shall use for uAPSD QNDP triggers * @uapsd_ac_flags: Set trigger-enabled and delivery-enabled indication for * each corresponding AC. * Use IEEE80211_WMM_IE_STA_QOSINFO_AC* for correct values. * @uapsd_max_sp: Use IEEE80211_WMM_IE_STA_QOSINFO_SP_* for correct * values. * @heavy_tx_thld_packets: TX threshold measured in number of packets * @heavy_rx_thld_packets: RX threshold measured in number of packets * @heavy_tx_thld_percentage: TX threshold measured in load's percentage * @heavy_rx_thld_percentage: RX threshold measured in load's percentage * @limited_ps_threshold: */ struct iwm_mac_power_cmd { /* CONTEXT_DESC_API_T_VER_1 */ uint32_t id_and_color; /* CLIENT_PM_POWER_TABLE_S_VER_1 */ uint16_t flags; uint16_t keep_alive_seconds; uint32_t rx_data_timeout; uint32_t tx_data_timeout; uint32_t rx_data_timeout_uapsd; uint32_t tx_data_timeout_uapsd; uint8_t lprx_rssi_threshold; uint8_t skip_dtim_periods; uint16_t snooze_interval; uint16_t snooze_window; uint8_t snooze_step; uint8_t qndp_tid; uint8_t uapsd_ac_flags; uint8_t uapsd_max_sp; uint8_t heavy_tx_thld_packets; uint8_t heavy_rx_thld_packets; uint8_t heavy_tx_thld_percentage; uint8_t heavy_rx_thld_percentage; uint8_t limited_ps_threshold; uint8_t reserved; } __packed; #define IWM_DEFAULT_PS_TX_DATA_TIMEOUT (100 * 1000) #define IWM_DEFAULT_PS_RX_DATA_TIMEOUT (100 * 1000) /* * struct iwm_uapsd_misbehaving_ap_notif - FW sends this notification when * associated AP is identified as improperly implementing uAPSD protocol. * IWM_PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78 * @sta_id: index of station in uCode's station table - associated AP ID in * this context. */ struct iwm_uapsd_misbehaving_ap_notif { uint32_t sta_id; uint8_t mac_id; uint8_t reserved[3]; } __packed; /** * struct iwm_beacon_filter_cmd * IWM_REPLY_BEACON_FILTERING_CMD = 0xd2 (command) * @id_and_color: MAC contex identifier * @bf_energy_delta: Used for RSSI filtering, if in 'normal' state. Send beacon * to driver if delta in Energy values calculated for this and last * passed beacon is greater than this threshold. Zero value means that * the Energy change is ignored for beacon filtering, and beacon will * not be forced to be sent to driver regardless of this delta. Typical * energy delta 5dB. * @bf_roaming_energy_delta: Used for RSSI filtering, if in 'roaming' state. * Send beacon to driver if delta in Energy values calculated for this * and last passed beacon is greater than this threshold. Zero value * means that the Energy change is ignored for beacon filtering while in * Roaming state, typical energy delta 1dB. * @bf_roaming_state: Used for RSSI filtering. If absolute Energy values * calculated for current beacon is less than the threshold, use * Roaming Energy Delta Threshold, otherwise use normal Energy Delta * Threshold. Typical energy threshold is -72dBm. * @bf_temp_threshold: This threshold determines the type of temperature * filtering (Slow or Fast) that is selected (Units are in Celsuis): * If the current temperature is above this threshold - Fast filter * will be used, If the current temperature is below this threshold - * Slow filter will be used. * @bf_temp_fast_filter: Send Beacon to driver if delta in temperature values * calculated for this and the last passed beacon is greater than this * threshold. Zero value means that the temperature change is ignored for * beacon filtering; beacons will not be forced to be sent to driver * regardless of whether its temerature has been changed. * @bf_temp_slow_filter: Send Beacon to driver if delta in temperature values * calculated for this and the last passed beacon is greater than this * threshold. Zero value means that the temperature change is ignored for * beacon filtering; beacons will not be forced to be sent to driver * regardless of whether its temerature has been changed. * @bf_enable_beacon_filter: 1, beacon filtering is enabled; 0, disabled. * @bf_escape_timer: Send beacons to driver if no beacons were passed * for a specific period of time. Units: Beacons. * @ba_escape_timer: Fully receive and parse beacon if no beacons were passed * for a longer period of time then this escape-timeout. Units: Beacons. * @ba_enable_beacon_abort: 1, beacon abort is enabled; 0, disabled. */ struct iwm_beacon_filter_cmd { uint32_t bf_energy_delta; uint32_t bf_roaming_energy_delta; uint32_t bf_roaming_state; uint32_t bf_temp_threshold; uint32_t bf_temp_fast_filter; uint32_t bf_temp_slow_filter; uint32_t bf_enable_beacon_filter; uint32_t bf_debug_flag; uint32_t bf_escape_timer; uint32_t ba_escape_timer; uint32_t ba_enable_beacon_abort; } __packed; /* Beacon filtering and beacon abort */ #define IWM_BF_ENERGY_DELTA_DEFAULT 5 #define IWM_BF_ENERGY_DELTA_MAX 255 #define IWM_BF_ENERGY_DELTA_MIN 0 #define IWM_BF_ROAMING_ENERGY_DELTA_DEFAULT 1 #define IWM_BF_ROAMING_ENERGY_DELTA_MAX 255 #define IWM_BF_ROAMING_ENERGY_DELTA_MIN 0 #define IWM_BF_ROAMING_STATE_DEFAULT 72 #define IWM_BF_ROAMING_STATE_MAX 255 #define IWM_BF_ROAMING_STATE_MIN 0 #define IWM_BF_TEMP_THRESHOLD_DEFAULT 112 #define IWM_BF_TEMP_THRESHOLD_MAX 255 #define IWM_BF_TEMP_THRESHOLD_MIN 0 #define IWM_BF_TEMP_FAST_FILTER_DEFAULT 1 #define IWM_BF_TEMP_FAST_FILTER_MAX 255 #define IWM_BF_TEMP_FAST_FILTER_MIN 0 #define IWM_BF_TEMP_SLOW_FILTER_DEFAULT 5 #define IWM_BF_TEMP_SLOW_FILTER_MAX 255 #define IWM_BF_TEMP_SLOW_FILTER_MIN 0 #define IWM_BF_ENABLE_BEACON_FILTER_DEFAULT 1 #define IWM_BF_DEBUG_FLAG_DEFAULT 0 #define IWM_BF_ESCAPE_TIMER_DEFAULT 50 #define IWM_BF_ESCAPE_TIMER_MAX 1024 #define IWM_BF_ESCAPE_TIMER_MIN 0 #define IWM_BA_ESCAPE_TIMER_DEFAULT 6 #define IWM_BA_ESCAPE_TIMER_D3 9 #define IWM_BA_ESCAPE_TIMER_MAX 1024 #define IWM_BA_ESCAPE_TIMER_MIN 0 #define IWM_BA_ENABLE_BEACON_ABORT_DEFAULT 1 #define IWM_BF_CMD_CONFIG_DEFAULTS \ .bf_energy_delta = htole32(IWM_BF_ENERGY_DELTA_DEFAULT), \ .bf_roaming_energy_delta = \ htole32(IWM_BF_ROAMING_ENERGY_DELTA_DEFAULT), \ .bf_roaming_state = htole32(IWM_BF_ROAMING_STATE_DEFAULT), \ .bf_temp_threshold = htole32(IWM_BF_TEMP_THRESHOLD_DEFAULT), \ .bf_temp_fast_filter = htole32(IWM_BF_TEMP_FAST_FILTER_DEFAULT), \ .bf_temp_slow_filter = htole32(IWM_BF_TEMP_SLOW_FILTER_DEFAULT), \ .bf_debug_flag = htole32(IWM_BF_DEBUG_FLAG_DEFAULT), \ .bf_escape_timer = htole32(IWM_BF_ESCAPE_TIMER_DEFAULT), \ .ba_escape_timer = htole32(IWM_BA_ESCAPE_TIMER_DEFAULT) /* * END mvm/fw-api-power.h */ /* * BEGIN mvm/fw-api-rs.h */ /* uCode API values for HT/VHT bit rates */ #define IWM_RATE_HT_SISO_MCS_0_PLCP 0 #define IWM_RATE_HT_SISO_MCS_1_PLCP 1 #define IWM_RATE_HT_SISO_MCS_2_PLCP 2 #define IWM_RATE_HT_SISO_MCS_3_PLCP 3 #define IWM_RATE_HT_SISO_MCS_4_PLCP 4 #define IWM_RATE_HT_SISO_MCS_5_PLCP 5 #define IWM_RATE_HT_SISO_MCS_6_PLCP 6 #define IWM_RATE_HT_SISO_MCS_7_PLCP 7 #define IWM_RATE_HT_MIMO2_MCS_8_PLCP 0x8 #define IWM_RATE_HT_MIMO2_MCS_9_PLCP 0x9 #define IWM_RATE_HT_MIMO2_MCS_10_PLCP 0xA #define IWM_RATE_HT_MIMO2_MCS_11_PLCP 0xB #define IWM_RATE_HT_MIMO2_MCS_12_PLCP 0xC #define IWM_RATE_HT_MIMO2_MCS_13_PLCP 0xD #define IWM_RATE_HT_MIMO2_MCS_14_PLCP 0xE #define IWM_RATE_HT_MIMO2_MCS_15_PLCP 0xF #define IWM_RATE_VHT_SISO_MCS_0_PLCP 0 #define IWM_RATE_VHT_SISO_MCS_1_PLCP 1 #define IWM_RATE_VHT_SISO_MCS_2_PLCP 2 #define IWM_RATE_VHT_SISO_MCS_3_PLCP 3 #define IWM_RATE_VHT_SISO_MCS_4_PLCP 4 #define IWM_RATE_VHT_SISO_MCS_5_PLCP 5 #define IWM_RATE_VHT_SISO_MCS_6_PLCP 6 #define IWM_RATE_VHT_SISO_MCS_7_PLCP 7 #define IWM_RATE_VHT_SISO_MCS_8_PLCP 8 #define IWM_RATE_VHT_SISO_MCS_9_PLCP 9 #define IWM_RATE_VHT_MIMO2_MCS_0_PLCP 0x10 #define IWM_RATE_VHT_MIMO2_MCS_1_PLCP 0x11 #define IWM_RATE_VHT_MIMO2_MCS_2_PLCP 0x12 #define IWM_RATE_VHT_MIMO2_MCS_3_PLCP 0x13 #define IWM_RATE_VHT_MIMO2_MCS_4_PLCP 0x14 #define IWM_RATE_VHT_MIMO2_MCS_5_PLCP 0x15 #define IWM_RATE_VHT_MIMO2_MCS_6_PLCP 0x16 #define IWM_RATE_VHT_MIMO2_MCS_7_PLCP 0x17 #define IWM_RATE_VHT_MIMO2_MCS_8_PLCP 0x18 #define IWM_RATE_VHT_MIMO2_MCS_9_PLCP 0x19 #define IWM_RATE_HT_SISO_MCS_INV_PLCP 0x20 #define IWM_RATE_HT_MIMO2_MCS_INV_PLCP IWM_RATE_HT_SISO_MCS_INV_PLCP #define IWM_RATE_VHT_SISO_MCS_INV_PLCP IWM_RATE_HT_SISO_MCS_INV_PLCP #define IWM_RATE_VHT_MIMO2_MCS_INV_PLCP IWM_RATE_HT_SISO_MCS_INV_PLCP #define IWM_RATE_HT_SISO_MCS_8_PLCP IWM_RATE_HT_SISO_MCS_INV_PLCP #define IWM_RATE_HT_SISO_MCS_9_PLCP IWM_RATE_HT_SISO_MCS_INV_PLCP /* * These serve as indexes into * struct iwm_rate_info fw_rate_idx_to_plcp[IWM_RATE_COUNT]; * TODO: avoid overlap between legacy and HT rates */ enum { IWM_RATE_1M_INDEX = 0, IWM_FIRST_CCK_RATE = IWM_RATE_1M_INDEX, IWM_RATE_2M_INDEX, IWM_RATE_5M_INDEX, IWM_RATE_11M_INDEX, IWM_LAST_CCK_RATE = IWM_RATE_11M_INDEX, IWM_RATE_6M_INDEX, IWM_FIRST_OFDM_RATE = IWM_RATE_6M_INDEX, IWM_RATE_MCS_0_INDEX = IWM_RATE_6M_INDEX, IWM_FIRST_HT_RATE = IWM_RATE_MCS_0_INDEX, IWM_FIRST_VHT_RATE = IWM_RATE_MCS_0_INDEX, IWM_RATE_9M_INDEX, IWM_RATE_12M_INDEX, IWM_RATE_MCS_1_INDEX = IWM_RATE_12M_INDEX, IWM_RATE_18M_INDEX, IWM_RATE_MCS_2_INDEX = IWM_RATE_18M_INDEX, IWM_RATE_24M_INDEX, IWM_RATE_MCS_3_INDEX = IWM_RATE_24M_INDEX, IWM_RATE_36M_INDEX, IWM_RATE_MCS_4_INDEX = IWM_RATE_36M_INDEX, IWM_RATE_48M_INDEX, IWM_RATE_MCS_5_INDEX = IWM_RATE_48M_INDEX, IWM_RATE_54M_INDEX, IWM_RATE_MCS_6_INDEX = IWM_RATE_54M_INDEX, IWM_LAST_NON_HT_RATE = IWM_RATE_54M_INDEX, IWM_RATE_60M_INDEX, IWM_RATE_MCS_7_INDEX = IWM_RATE_60M_INDEX, IWM_LAST_HT_RATE = IWM_RATE_MCS_7_INDEX, IWM_RATE_MCS_8_INDEX, IWM_RATE_MCS_9_INDEX, IWM_LAST_VHT_RATE = IWM_RATE_MCS_9_INDEX, IWM_RATE_COUNT_LEGACY = IWM_LAST_NON_HT_RATE + 1, IWM_RATE_COUNT = IWM_LAST_VHT_RATE + 1, }; #define IWM_RATE_BIT_MSK(r) (1 << (IWM_RATE_##r##M_INDEX)) /* fw API values for legacy bit rates, both OFDM and CCK */ #define IWM_RATE_6M_PLCP 13 #define IWM_RATE_9M_PLCP 15 #define IWM_RATE_12M_PLCP 5 #define IWM_RATE_18M_PLCP 7 #define IWM_RATE_24M_PLCP 9 #define IWM_RATE_36M_PLCP 11 #define IWM_RATE_48M_PLCP 1 #define IWM_RATE_54M_PLCP 3 #define IWM_RATE_1M_PLCP 10 #define IWM_RATE_2M_PLCP 20 #define IWM_RATE_5M_PLCP 55 #define IWM_RATE_11M_PLCP 110 #define IWM_RATE_INVM_PLCP 0xff /* * rate_n_flags bit fields * * The 32-bit value has different layouts in the low 8 bites depending on the * format. There are three formats, HT, VHT and legacy (11abg, with subformats * for CCK and OFDM). * * High-throughput (HT) rate format * bit 8 is 1, bit 26 is 0, bit 9 is 0 (OFDM) * Very High-throughput (VHT) rate format * bit 8 is 0, bit 26 is 1, bit 9 is 0 (OFDM) * Legacy OFDM rate format for bits 7:0 * bit 8 is 0, bit 26 is 0, bit 9 is 0 (OFDM) * Legacy CCK rate format for bits 7:0: * bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK) */ /* Bit 8: (1) HT format, (0) legacy or VHT format */ #define IWM_RATE_MCS_HT_POS 8 #define IWM_RATE_MCS_HT_MSK (1 << IWM_RATE_MCS_HT_POS) /* Bit 9: (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */ #define IWM_RATE_MCS_CCK_POS 9 #define IWM_RATE_MCS_CCK_MSK (1 << IWM_RATE_MCS_CCK_POS) /* Bit 26: (1) VHT format, (0) legacy format in bits 8:0 */ #define IWM_RATE_MCS_VHT_POS 26 #define IWM_RATE_MCS_VHT_MSK (1 << IWM_RATE_MCS_VHT_POS) /* Bit 31: (1) RTS (2) CTS */ #define IWM_RATE_MCS_RTS_REQUIRED_POS 30 #define IWM_RATE_MCS_RTS_REQUIRED_MSK (1 << IWM_RATE_MCS_RTS_REQUIRED_POS) /* * High-throughput (HT) rate format for bits 7:0 * * 2-0: MCS rate base * 0) 6 Mbps * 1) 12 Mbps * 2) 18 Mbps * 3) 24 Mbps * 4) 36 Mbps * 5) 48 Mbps * 6) 54 Mbps * 7) 60 Mbps * 4-3: 0) Single stream (SISO) * 1) Dual stream (MIMO) * 2) Triple stream (MIMO) * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data * (bits 7-6 are zero) * * Together the low 5 bits work out to the MCS index because we don't * support MCSes above 15/23, and 0-7 have one stream, 8-15 have two * streams and 16-23 have three streams. We could also support MCS 32 * which is the duplicate 20 MHz MCS (bit 5 set, all others zero.) */ #define IWM_RATE_HT_MCS_RATE_CODE_MSK 0x7 #define IWM_RATE_HT_MCS_NSS_POS 3 #define IWM_RATE_HT_MCS_NSS_MSK (3 << IWM_RATE_HT_MCS_NSS_POS) /* Bit 10: (1) Use Green Field preamble */ #define IWM_RATE_HT_MCS_GF_POS 10 #define IWM_RATE_HT_MCS_GF_MSK (1 << IWM_RATE_HT_MCS_GF_POS) #define IWM_RATE_HT_MCS_INDEX_MSK 0x3f /* * Very High-throughput (VHT) rate format for bits 7:0 * * 3-0: VHT MCS (0-9) * 5-4: number of streams - 1: * 0) Single stream (SISO) * 1) Dual stream (MIMO) * 2) Triple stream (MIMO) */ /* Bit 4-5: (0) SISO, (1) MIMO2 (2) MIMO3 */ #define IWM_RATE_VHT_MCS_RATE_CODE_MSK 0xf #define IWM_RATE_VHT_MCS_NSS_POS 4 #define IWM_RATE_VHT_MCS_NSS_MSK (3 << IWM_RATE_VHT_MCS_NSS_POS) /* * Legacy OFDM rate format for bits 7:0 * * 3-0: 0xD) 6 Mbps * 0xF) 9 Mbps * 0x5) 12 Mbps * 0x7) 18 Mbps * 0x9) 24 Mbps * 0xB) 36 Mbps * 0x1) 48 Mbps * 0x3) 54 Mbps * (bits 7-4 are 0) * * Legacy CCK rate format for bits 7:0: * bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK): * * 6-0: 10) 1 Mbps * 20) 2 Mbps * 55) 5.5 Mbps * 110) 11 Mbps * (bit 7 is 0) */ #define IWM_RATE_LEGACY_RATE_MSK 0xff /* * Bit 11-12: (0) 20MHz, (1) 40MHz, (2) 80MHz, (3) 160MHz * 0 and 1 are valid for HT and VHT, 2 and 3 only for VHT */ #define IWM_RATE_MCS_CHAN_WIDTH_POS 11 #define IWM_RATE_MCS_CHAN_WIDTH_MSK (3 << IWM_RATE_MCS_CHAN_WIDTH_POS) #define IWM_RATE_MCS_CHAN_WIDTH_20 (0 << IWM_RATE_MCS_CHAN_WIDTH_POS) #define IWM_RATE_MCS_CHAN_WIDTH_40 (1 << IWM_RATE_MCS_CHAN_WIDTH_POS) #define IWM_RATE_MCS_CHAN_WIDTH_80 (2 << IWM_RATE_MCS_CHAN_WIDTH_POS) #define IWM_RATE_MCS_CHAN_WIDTH_160 (3 << IWM_RATE_MCS_CHAN_WIDTH_POS) /* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */ #define IWM_RATE_MCS_SGI_POS 13 #define IWM_RATE_MCS_SGI_MSK (1 << IWM_RATE_MCS_SGI_POS) /* Bit 14-16: Antenna selection (1) Ant A, (2) Ant B, (4) Ant C */ #define IWM_RATE_MCS_ANT_POS 14 #define IWM_RATE_MCS_ANT_A_MSK (1 << IWM_RATE_MCS_ANT_POS) #define IWM_RATE_MCS_ANT_B_MSK (2 << IWM_RATE_MCS_ANT_POS) #define IWM_RATE_MCS_ANT_C_MSK (4 << IWM_RATE_MCS_ANT_POS) #define IWM_RATE_MCS_ANT_AB_MSK (IWM_RATE_MCS_ANT_A_MSK | \ IWM_RATE_MCS_ANT_B_MSK) #define IWM_RATE_MCS_ANT_ABC_MSK (IWM_RATE_MCS_ANT_AB_MSK | \ IWM_RATE_MCS_ANT_C_MSK) #define IWM_RATE_MCS_ANT_MSK IWM_RATE_MCS_ANT_ABC_MSK #define IWM_RATE_MCS_ANT_NUM 3 /* Bit 17-18: (0) SS, (1) SS*2 */ #define IWM_RATE_MCS_STBC_POS 17 #define IWM_RATE_MCS_STBC_MSK (1 << IWM_RATE_MCS_STBC_POS) /* Bit 19: (0) Beamforming is off, (1) Beamforming is on */ #define IWM_RATE_MCS_BF_POS 19 #define IWM_RATE_MCS_BF_MSK (1 << IWM_RATE_MCS_BF_POS) /* Bit 20: (0) ZLF is off, (1) ZLF is on */ #define IWM_RATE_MCS_ZLF_POS 20 #define IWM_RATE_MCS_ZLF_MSK (1 << IWM_RATE_MCS_ZLF_POS) /* Bit 24-25: (0) 20MHz (no dup), (1) 2x20MHz, (2) 4x20MHz, 3 8x20MHz */ #define IWM_RATE_MCS_DUP_POS 24 #define IWM_RATE_MCS_DUP_MSK (3 << IWM_RATE_MCS_DUP_POS) /* Bit 27: (1) LDPC enabled, (0) LDPC disabled */ #define IWM_RATE_MCS_LDPC_POS 27 #define IWM_RATE_MCS_LDPC_MSK (1 << IWM_RATE_MCS_LDPC_POS) /* Link Quality definitions */ /* # entries in rate scale table to support Tx retries */ #define IWM_LQ_MAX_RETRY_NUM 16 /* Link quality command flags bit fields */ /* Bit 0: (0) Don't use RTS (1) Use RTS */ #define IWM_LQ_FLAG_USE_RTS_POS 0 #define IWM_LQ_FLAG_USE_RTS_MSK (1 << IWM_LQ_FLAG_USE_RTS_POS) /* Bit 1-3: LQ command color. Used to match responses to LQ commands */ #define IWM_LQ_FLAG_COLOR_POS 1 #define IWM_LQ_FLAG_COLOR_MSK (7 << IWM_LQ_FLAG_COLOR_POS) /* Bit 4-5: Tx RTS BW Signalling * (0) No RTS BW signalling * (1) Static BW signalling * (2) Dynamic BW signalling */ #define IWM_LQ_FLAG_RTS_BW_SIG_POS 4 #define IWM_LQ_FLAG_RTS_BW_SIG_NONE (0 << IWM_LQ_FLAG_RTS_BW_SIG_POS) #define IWM_LQ_FLAG_RTS_BW_SIG_STATIC (1 << IWM_LQ_FLAG_RTS_BW_SIG_POS) #define IWM_LQ_FLAG_RTS_BW_SIG_DYNAMIC (2 << IWM_LQ_FLAG_RTS_BW_SIG_POS) /* Bit 6: (0) No dynamic BW selection (1) Allow dynamic BW selection * Dyanmic BW selection allows Tx with narrower BW then requested in rates */ #define IWM_LQ_FLAG_DYNAMIC_BW_POS 6 #define IWM_LQ_FLAG_DYNAMIC_BW_MSK (1 << IWM_LQ_FLAG_DYNAMIC_BW_POS) /* Antenna flags. */ #define IWM_ANT_A (1 << 0) #define IWM_ANT_B (1 << 1) #define IWM_ANT_C (1 << 2) /* Shortcuts. */ #define IWM_ANT_AB (IWM_ANT_A | IWM_ANT_B) #define IWM_ANT_BC (IWM_ANT_B | IWM_ANT_C) #define IWM_ANT_ABC (IWM_ANT_A | IWM_ANT_B | IWM_ANT_C) /** * struct iwm_lq_cmd - link quality command * @sta_id: station to update * @control: not used * @flags: combination of IWM_LQ_FLAG_* * @mimo_delim: the first SISO index in rs_table, which separates MIMO * and SISO rates * @single_stream_ant_msk: best antenna for SISO (can be dual in CDD). * Should be IWM_ANT_[ABC] * @dual_stream_ant_msk: best antennas for MIMO, combination of IWM_ANT_[ABC] * @initial_rate_index: first index from rs_table per AC category * @agg_time_limit: aggregation max time threshold in usec/100, meaning * value of 100 is one usec. Range is 100 to 8000 * @agg_disable_start_th: try-count threshold for starting aggregation. * If a frame has higher try-count, it should not be selected for * starting an aggregation sequence. * @agg_frame_cnt_limit: max frame count in an aggregation. * 0: no limit * 1: no aggregation (one frame per aggregation) * 2 - 0x3f: maximal number of frames (up to 3f == 63) * @rs_table: array of rates for each TX try, each is rate_n_flags, * meaning it is a combination of IWM_RATE_MCS_* and IWM_RATE_*_PLCP * @bf_params: beam forming params, currently not used */ struct iwm_lq_cmd { uint8_t sta_id; uint8_t reserved1; uint16_t control; /* LINK_QUAL_GENERAL_PARAMS_API_S_VER_1 */ uint8_t flags; uint8_t mimo_delim; uint8_t single_stream_ant_msk; uint8_t dual_stream_ant_msk; uint8_t initial_rate_index[IWM_AC_NUM]; /* LINK_QUAL_AGG_PARAMS_API_S_VER_1 */ uint16_t agg_time_limit; uint8_t agg_disable_start_th; uint8_t agg_frame_cnt_limit; uint32_t reserved2; uint32_t rs_table[IWM_LQ_MAX_RETRY_NUM]; uint32_t bf_params; }; /* LINK_QUALITY_CMD_API_S_VER_1 */ /* * END mvm/fw-api-rs.h */ /* * BEGIN mvm/fw-api-tx.h */ /** * bitmasks for tx_flags in TX command * @IWM_TX_CMD_FLG_PROT_REQUIRE: use RTS or CTS-to-self to protect the frame * @IWM_TX_CMD_FLG_ACK: expect ACK from receiving station * @IWM_TX_CMD_FLG_STA_RATE: use RS table with initial index from the TX command. * Otherwise, use rate_n_flags from the TX command * @IWM_TX_CMD_FLG_BA: this frame is a block ack * @IWM_TX_CMD_FLG_BAR: this frame is a BA request, immediate BAR is expected * Must set IWM_TX_CMD_FLG_ACK with this flag. * @IWM_TX_CMD_FLG_TXOP_PROT: protect frame with full TXOP protection * @IWM_TX_CMD_FLG_VHT_NDPA: mark frame is NDPA for VHT beamformer sequence * @IWM_TX_CMD_FLG_HT_NDPA: mark frame is NDPA for HT beamformer sequence * @IWM_TX_CMD_FLG_CSI_FDBK2HOST: mark to send feedback to host (only if good CRC) * @IWM_TX_CMD_FLG_BT_DIS: disable BT priority for this frame * @IWM_TX_CMD_FLG_SEQ_CTL: set if FW should override the sequence control. * Should be set for mgmt, non-QOS data, mcast, bcast and in scan command * @IWM_TX_CMD_FLG_MORE_FRAG: this frame is non-last MPDU * @IWM_TX_CMD_FLG_NEXT_FRAME: this frame includes information of the next frame * @IWM_TX_CMD_FLG_TSF: FW should calculate and insert TSF in the frame * Should be set for beacons and probe responses * @IWM_TX_CMD_FLG_CALIB: activate PA TX power calibrations * @IWM_TX_CMD_FLG_KEEP_SEQ_CTL: if seq_ctl is set, don't increase inner seq count * @IWM_TX_CMD_FLG_AGG_START: allow this frame to start aggregation * @IWM_TX_CMD_FLG_MH_PAD: driver inserted 2 byte padding after MAC header. * Should be set for 26/30 length MAC headers * @IWM_TX_CMD_FLG_RESP_TO_DRV: zero this if the response should go only to FW * @IWM_TX_CMD_FLG_CCMP_AGG: this frame uses CCMP for aggregation acceleration * @IWM_TX_CMD_FLG_TKIP_MIC_DONE: FW already performed TKIP MIC calculation * @IWM_TX_CMD_FLG_DUR: disable duration overwriting used in PS-Poll Assoc-id * @IWM_TX_CMD_FLG_FW_DROP: FW should mark frame to be dropped * @IWM_TX_CMD_FLG_EXEC_PAPD: execute PAPD * @IWM_TX_CMD_FLG_PAPD_TYPE: 0 for reference power, 1 for nominal power * @IWM_TX_CMD_FLG_HCCA_CHUNK: mark start of TSPEC chunk */ #define IWM_TX_CMD_FLG_PROT_REQUIRE (1 << 0) #define IWM_TX_CMD_FLG_ACK (1 << 3) #define IWM_TX_CMD_FLG_STA_RATE (1 << 4) #define IWM_TX_CMD_FLG_BA (1 << 5) #define IWM_TX_CMD_FLG_BAR (1 << 6) #define IWM_TX_CMD_FLG_TXOP_PROT (1 << 7) #define IWM_TX_CMD_FLG_VHT_NDPA (1 << 8) #define IWM_TX_CMD_FLG_HT_NDPA (1 << 9) #define IWM_TX_CMD_FLG_CSI_FDBK2HOST (1 << 10) #define IWM_TX_CMD_FLG_BT_DIS (1 << 12) #define IWM_TX_CMD_FLG_SEQ_CTL (1 << 13) #define IWM_TX_CMD_FLG_MORE_FRAG (1 << 14) #define IWM_TX_CMD_FLG_NEXT_FRAME (1 << 15) #define IWM_TX_CMD_FLG_TSF (1 << 16) #define IWM_TX_CMD_FLG_CALIB (1 << 17) #define IWM_TX_CMD_FLG_KEEP_SEQ_CTL (1 << 18) #define IWM_TX_CMD_FLG_AGG_START (1 << 19) #define IWM_TX_CMD_FLG_MH_PAD (1 << 20) #define IWM_TX_CMD_FLG_RESP_TO_DRV (1 << 21) #define IWM_TX_CMD_FLG_CCMP_AGG (1 << 22) #define IWM_TX_CMD_FLG_TKIP_MIC_DONE (1 << 23) #define IWM_TX_CMD_FLG_DUR (1 << 25) #define IWM_TX_CMD_FLG_FW_DROP (1 << 26) #define IWM_TX_CMD_FLG_EXEC_PAPD (1 << 27) #define IWM_TX_CMD_FLG_PAPD_TYPE (1 << 28) #define IWM_TX_CMD_FLG_HCCA_CHUNK (1U << 31) /* IWM_TX_FLAGS_BITS_API_S_VER_1 */ /** * enum iwm_tx_pm_timeouts - pm timeout values in TX command * @IWM_PM_FRAME_NONE: no need to suspend sleep mode * @IWM_PM_FRAME_MGMT: fw suspend sleep mode for 100TU * @IWM_PM_FRAME_ASSOC: fw suspend sleep mode for 10sec */ enum iwm_tx_pm_timeouts { IWM_PM_FRAME_NONE = 0, IWM_PM_FRAME_MGMT = 2, IWM_PM_FRAME_ASSOC = 3, }; /* * TX command security control */ #define IWM_TX_CMD_SEC_WEP 0x01 #define IWM_TX_CMD_SEC_CCM 0x02 #define IWM_TX_CMD_SEC_TKIP 0x03 #define IWM_TX_CMD_SEC_EXT 0x04 #define IWM_TX_CMD_SEC_MSK 0x07 #define IWM_TX_CMD_SEC_WEP_KEY_IDX_POS 6 #define IWM_TX_CMD_SEC_WEP_KEY_IDX_MSK 0xc0 #define IWM_TX_CMD_SEC_KEY128 0x08 /* TODO: how does these values are OK with only 16 bit variable??? */ /* * TX command next frame info * * bits 0:2 - security control (IWM_TX_CMD_SEC_*) * bit 3 - immediate ACK required * bit 4 - rate is taken from STA table * bit 5 - frame belongs to BA stream * bit 6 - immediate BA response expected * bit 7 - unused * bits 8:15 - Station ID * bits 16:31 - rate */ #define IWM_TX_CMD_NEXT_FRAME_ACK_MSK (0x8) #define IWM_TX_CMD_NEXT_FRAME_STA_RATE_MSK (0x10) #define IWM_TX_CMD_NEXT_FRAME_BA_MSK (0x20) #define IWM_TX_CMD_NEXT_FRAME_IMM_BA_RSP_MSK (0x40) #define IWM_TX_CMD_NEXT_FRAME_FLAGS_MSK (0xf8) #define IWM_TX_CMD_NEXT_FRAME_STA_ID_MSK (0xff00) #define IWM_TX_CMD_NEXT_FRAME_STA_ID_POS (8) #define IWM_TX_CMD_NEXT_FRAME_RATE_MSK (0xffff0000) #define IWM_TX_CMD_NEXT_FRAME_RATE_POS (16) /* * TX command Frame life time in us - to be written in pm_frame_timeout */ #define IWM_TX_CMD_LIFE_TIME_INFINITE 0xFFFFFFFF #define IWM_TX_CMD_LIFE_TIME_DEFAULT 2000000 /* 2000 ms*/ #define IWM_TX_CMD_LIFE_TIME_PROBE_RESP 40000 /* 40 ms */ #define IWM_TX_CMD_LIFE_TIME_EXPIRED_FRAME 0 /* * TID for non QoS frames - to be written in tid_tspec */ #define IWM_MAX_TID_COUNT 8 #define IWM_TID_NON_QOS 0 #define IWM_TID_MGMT 15 /* * Limits on the retransmissions - to be written in {data,rts}_retry_limit */ #define IWM_DEFAULT_TX_RETRY 15 #define IWM_MGMT_DFAULT_RETRY_LIMIT 3 #define IWM_RTS_DFAULT_RETRY_LIMIT 3 #define IWM_BAR_DFAULT_RETRY_LIMIT 60 #define IWM_LOW_RETRY_LIMIT 7 /** * enum iwm_tx_offload_assist_flags_pos - set %iwm_tx_cmd offload_assist values * @TX_CMD_OFFLD_IP_HDR: offset to start of IP header (in words) * from mac header end. For normal case it is 4 words for SNAP. * note: tx_cmd, mac header and pad are not counted in the offset. * This is used to help the offload in case there is tunneling such as * IPv6 in IPv4, in such case the ip header offset should point to the * inner ip header and IPv4 checksum of the external header should be * calculated by driver. * @TX_CMD_OFFLD_L4_EN: enable TCP/UDP checksum * @TX_CMD_OFFLD_L3_EN: enable IP header checksum * @TX_CMD_OFFLD_MH_SIZE: size of the mac header in words. Includes the IV * field. Doesn't include the pad. * @TX_CMD_OFFLD_PAD: mark 2-byte pad was inserted after the mac header for * alignment * @TX_CMD_OFFLD_AMSDU: mark TX command is A-MSDU */ #define IWM_TX_CMD_OFFLD_IP_HDR (1 << 0) #define IWM_TX_CMD_OFFLD_L4_EN (1 << 6) #define IWM_TX_CMD_OFFLD_L3_EN (1 << 7) #define IWM_TX_CMD_OFFLD_MH_SIZE (1 << 8) #define IWM_TX_CMD_OFFLD_PAD (1 << 13) #define IWM_TX_CMD_OFFLD_AMSDU (1 << 14) /* TODO: complete documentation for try_cnt and btkill_cnt */ /** * struct iwm_tx_cmd - TX command struct to FW * ( IWM_TX_CMD = 0x1c ) * @len: in bytes of the payload, see below for details * @offload_assist: TX offload configuration * @tx_flags: combination of IWM_TX_CMD_FLG_* * @rate_n_flags: rate for *all* Tx attempts, if IWM_TX_CMD_FLG_STA_RATE_MSK is * cleared. Combination of IWM_RATE_MCS_* * @sta_id: index of destination station in FW station table * @sec_ctl: security control, IWM_TX_CMD_SEC_* * @initial_rate_index: index into the rate table for initial TX attempt. * Applied if IWM_TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames. * @key: security key * @next_frame_flags: IWM_TX_CMD_SEC_* and IWM_TX_CMD_NEXT_FRAME_* * @life_time: frame life time (usecs??) * @dram_lsb_ptr: Physical address of scratch area in the command (try_cnt + * btkill_cnd + reserved), first 32 bits. "0" disables usage. * @dram_msb_ptr: upper bits of the scratch physical address * @rts_retry_limit: max attempts for RTS * @data_retry_limit: max attempts to send the data packet * @tid_spec: TID/tspec * @pm_frame_timeout: PM TX frame timeout * @driver_txop: duration od EDCA TXOP, in 32-usec units. Set this if not * specified by HCCA protocol * * The byte count (both len and next_frame_len) includes MAC header * (24/26/30/32 bytes) * + 2 bytes pad if 26/30 header size * + 8 byte IV for CCM or TKIP (not used for WEP) * + Data payload * + 8-byte MIC (not used for CCM/WEP) * It does not include post-MAC padding, i.e., * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes. * Range of len: 14-2342 bytes. * * After the struct fields the MAC header is placed, plus any padding, * and then the actial payload. */ struct iwm_tx_cmd { uint16_t len; uint16_t offload_assist; uint32_t tx_flags; struct { uint8_t try_cnt; uint8_t btkill_cnt; uint16_t reserved; } scratch; /* DRAM_SCRATCH_API_U_VER_1 */ uint32_t rate_n_flags; uint8_t sta_id; uint8_t sec_ctl; uint8_t initial_rate_index; uint8_t reserved2; uint8_t key[16]; uint32_t reserved3; uint32_t life_time; uint32_t dram_lsb_ptr; uint8_t dram_msb_ptr; uint8_t rts_retry_limit; uint8_t data_retry_limit; uint8_t tid_tspec; uint16_t pm_frame_timeout; uint16_t reserved4; uint8_t payload[0]; struct ieee80211_frame hdr[0]; } __packed; /* IWM_TX_CMD_API_S_VER_6 */ /* * TX response related data */ /* * status that is returned by the fw after attempts to Tx * @IWM_TX_STATUS_FAIL_STA_COLOR_MISMATCH: mismatch between color of Tx cmd and * STA table * Valid only if frame_count =1 */ #define IWM_TX_STATUS_MSK 0x000000ff #define IWM_TX_STATUS_SUCCESS 0x01 #define IWM_TX_STATUS_DIRECT_DONE 0x02 /* postpone TX */ #define IWM_TX_STATUS_POSTPONE_DELAY 0x40 #define IWM_TX_STATUS_POSTPONE_FEW_BYTES 0x41 #define IWM_TX_STATUS_POSTPONE_BT_PRIO 0x42 #define IWM_TX_STATUS_POSTPONE_QUIET_PERIOD 0x43 #define IWM_TX_STATUS_POSTPONE_CALC_TTAK 0x44 /* abort TX */ #define IWM_TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY 0x81 #define IWM_TX_STATUS_FAIL_SHORT_LIMIT 0x82 #define IWM_TX_STATUS_FAIL_LONG_LIMIT 0x83 #define IWM_TX_STATUS_FAIL_UNDERRUN 0x84 #define IWM_TX_STATUS_FAIL_DRAIN_FLOW 0x85 #define IWM_TX_STATUS_FAIL_RFKILL_FLUSH 0x86 #define IWM_TX_STATUS_FAIL_LIFE_EXPIRE 0x87 #define IWM_TX_STATUS_FAIL_DEST_PS 0x88 #define IWM_TX_STATUS_FAIL_HOST_ABORTED 0x89 #define IWM_TX_STATUS_FAIL_BT_RETRY 0x8a #define IWM_TX_STATUS_FAIL_STA_INVALID 0x8b #define IWM_TX_STATUS_FAIL_FRAG_DROPPED 0x8c #define IWM_TX_STATUS_FAIL_TID_DISABLE 0x8d #define IWM_TX_STATUS_FAIL_FIFO_FLUSHED 0x8e #define IWM_TX_STATUS_FAIL_SMALL_CF_POLL 0x8f #define IWM_TX_STATUS_FAIL_FW_DROP 0x90 #define IWM_TX_STATUS_FAIL_STA_COLOR_MISMATCH 0x91 #define IWM_TX_STATUS_INTERNAL_ABORT 0x92 #define IWM_TX_MODE_MSK 0x00000f00 #define IWM_TX_MODE_NO_BURST 0x00000000 #define IWM_TX_MODE_IN_BURST_SEQ 0x00000100 #define IWM_TX_MODE_FIRST_IN_BURST 0x00000200 #define IWM_TX_QUEUE_NUM_MSK 0x0001f000 #define IWM_TX_NARROW_BW_MSK 0x00060000 #define IWM_TX_NARROW_BW_1DIV2 0x00020000 #define IWM_TX_NARROW_BW_1DIV4 0x00040000 #define IWM_TX_NARROW_BW_1DIV8 0x00060000 /* * TX aggregation status * @IWM_AGG_TX_STATE_TRY_CNT_MSK: Retry count for 1st frame in aggregation (retries * occur if tx failed for this frame when it was a member of a previous * aggregation block). If rate scaling is used, retry count indicates the * rate table entry used for all frames in the new agg. */ #define IWM_AGG_TX_STATE_STATUS_MSK 0x0fff #define IWM_AGG_TX_STATE_TRANSMITTED 0x0000 #define IWM_AGG_TX_STATE_UNDERRUN 0x0001 #define IWM_AGG_TX_STATE_BT_PRIO 0x0002 #define IWM_AGG_TX_STATE_FEW_BYTES 0x0004 #define IWM_AGG_TX_STATE_ABORT 0x0008 #define IWM_AGG_TX_STATE_LAST_SENT_TTL 0x0010 #define IWM_AGG_TX_STATE_LAST_SENT_TRY_CNT 0x0020 #define IWM_AGG_TX_STATE_LAST_SENT_BT_KILL 0x0040 #define IWM_AGG_TX_STATE_SCD_QUERY 0x0080 #define IWM_AGG_TX_STATE_TEST_BAD_CRC32 0x0100 #define IWM_AGG_TX_STATE_RESPONSE 0x01ff #define IWM_AGG_TX_STATE_DUMP_TX 0x0200 #define IWM_AGG_TX_STATE_DELAY_TX 0x0400 #define IWM_AGG_TX_STATE_TRY_CNT_POS 12 #define IWM_AGG_TX_STATE_TRY_CNT_MSK (0xf << IWM_AGG_TX_STATE_TRY_CNT_POS) #define IWM_AGG_TX_STATE_LAST_SENT_MSK (IWM_AGG_TX_STATE_LAST_SENT_TTL| \ IWM_AGG_TX_STATE_LAST_SENT_TRY_CNT| \ IWM_AGG_TX_STATE_LAST_SENT_BT_KILL) /* * The mask below describes a status where we are absolutely sure that the MPDU * wasn't sent. For BA/Underrun we cannot be that sure. All we know that we've * written the bytes to the TXE, but we know nothing about what the DSP did. */ #define IWM_AGG_TX_STAT_FRAME_NOT_SENT (IWM_AGG_TX_STATE_FEW_BYTES | \ IWM_AGG_TX_STATE_ABORT | \ IWM_AGG_TX_STATE_SCD_QUERY) /* * IWM_REPLY_TX = 0x1c (response) * * This response may be in one of two slightly different formats, indicated * by the frame_count field: * * 1) No aggregation (frame_count == 1). This reports Tx results for a single * frame. Multiple attempts, at various bit rates, may have been made for * this frame. * * 2) Aggregation (frame_count > 1). This reports Tx results for two or more * frames that used block-acknowledge. All frames were transmitted at * same rate. Rate scaling may have been used if first frame in this new * agg block failed in previous agg block(s). * * Note that, for aggregation, ACK (block-ack) status is not delivered * here; block-ack has not been received by the time the device records * this status. * This status relates to reasons the tx might have been blocked or aborted * within the device, rather than whether it was received successfully by * the destination station. */ /** * struct iwm_agg_tx_status - per packet TX aggregation status * @status: IWM_AGG_TX_STATE_* * @idx: Tx queue index of this frame * @qid: Tx queue ID of this frame */ struct iwm_agg_tx_status { uint16_t status; #if 0 /* OpenBSD update - convert code to use this */ uint8_t idx; uint8_t qid; #else uint16_t sequence; #endif } __packed; /* * definitions for initial rate index field * bits [3:0] initial rate index * bits [6:4] rate table color, used for the initial rate * bit-7 invalid rate indication */ #define IWM_TX_RES_INIT_RATE_INDEX_MSK 0x0f #define IWM_TX_RES_RATE_TABLE_COLOR_MSK 0x70 #define IWM_TX_RES_INV_RATE_INDEX_MSK 0x80 #define IWM_TX_RES_GET_TID(_ra_tid) ((_ra_tid) & 0x0f) #define IWM_TX_RES_GET_RA(_ra_tid) ((_ra_tid) >> 4) /** * struct iwm_tx_resp - notifies that fw is TXing a packet * ( IWM_REPLY_TX = 0x1c ) * @frame_count: 1 no aggregation, >1 aggregation * @bt_kill_count: num of times blocked by bluetooth (unused for agg) * @failure_rts: num of failures due to unsuccessful RTS * @failure_frame: num failures due to no ACK (unused for agg) * @initial_rate: for non-agg: rate of the successful Tx. For agg: rate of the * Tx of all the batch. IWM_RATE_MCS_* * @wireless_media_time: for non-agg: RTS + CTS + frame tx attempts time + ACK. * for agg: RTS + CTS + aggregation tx time + block-ack time. * in usec. * @pa_status: tx power info * @pa_integ_res_a: tx power info * @pa_integ_res_b: tx power info * @pa_integ_res_c: tx power info * @measurement_req_id: tx power info * @tfd_info: TFD information set by the FH * @seq_ctl: sequence control field from IEEE80211 frame header * @byte_cnt: byte count from the Tx cmd * @tlc_info: TLC rate info * @ra_tid: bits [3:0] = ra, bits [7:4] = tid * @frame_ctrl: frame control * @status: for non-agg: frame status IWM_TX_STATUS_* * for agg: status of 1st frame, IWM_AGG_TX_STATE_*; other frame status fields * follow this one, up to frame_count. * * After the array of statuses comes the SSN of the SCD. Look at * %iwm_get_scd_ssn for more details. */ struct iwm_tx_resp { uint8_t frame_count; uint8_t bt_kill_count; uint8_t failure_rts; uint8_t failure_frame; uint32_t initial_rate; uint16_t wireless_media_time; uint8_t pa_status; uint8_t pa_integ_res_a[3]; uint8_t pa_integ_res_b[3]; uint8_t pa_integ_res_c[3]; uint16_t measurement_req_id; uint16_t reserved; uint32_t tfd_info; uint16_t seq_ctl; uint16_t byte_cnt; uint8_t tlc_info; uint8_t ra_tid; uint16_t frame_ctrl; struct iwm_agg_tx_status status; } __packed; /* IWM_TX_RSP_API_S_VER_3 */ /** * struct iwm_ba_notif - notifies about reception of BA * ( IWM_BA_NOTIF = 0xc5 ) * @sta_addr: MAC address * @sta_id: Index of recipient (BA-sending) station in fw's station table * @tid: tid of the session * @seq_ctl: sequence control field from IEEE80211 frame header (the first * bit in @bitmap corresponds to the sequence number stored here) * @bitmap: the bitmap of the BA notification as seen in the air * @scd_flow: the tx queue this BA relates to * @scd_ssn: the index of the last contiguously sent packet * @txed: number of Txed frames in this batch * @txed_2_done: number of Acked frames in this batch * @reduced_txp: power reduced according to TPC. This is the actual value and * not a copy from the LQ command. Thus, if not the first rate was used * for Tx-ing then this value will be set to 0 by FW. * @reserved1: reserved */ struct iwm_ba_notif { uint8_t sta_addr[ETHER_ADDR_LEN]; uint16_t reserved; uint8_t sta_id; uint8_t tid; uint16_t seq_ctl; uint64_t bitmap; uint16_t scd_flow; uint16_t scd_ssn; uint8_t txed; uint8_t txed_2_done; uint8_t reduced_txp; uint8_t reserved1; } __packed; /* * struct iwm_mac_beacon_cmd - beacon template command * @tx: the tx commands associated with the beacon frame * @template_id: currently equal to the mac context id of the coresponding * mac. * @tim_idx: the offset of the tim IE in the beacon * @tim_size: the length of the tim IE * @frame: the template of the beacon frame */ struct iwm_mac_beacon_cmd { struct iwm_tx_cmd tx; uint32_t template_id; uint32_t tim_idx; uint32_t tim_size; struct ieee80211_frame frame[0]; } __packed; struct iwm_beacon_notif { struct iwm_tx_resp beacon_notify_hdr; uint64_t tsf; uint32_t ibss_mgr_status; } __packed; /** * dump (flush) control flags * @IWM_DUMP_TX_FIFO_FLUSH: Dump MSDUs until the FIFO is empty * and the TFD queues are empty. */ #define IWM_DUMP_TX_FIFO_FLUSH (1 << 1) /** * struct iwm_tx_path_flush_cmd -- queue/FIFO flush command * @queues_ctl: bitmap of queues to flush * @flush_ctl: control flags * @reserved: reserved */ struct iwm_tx_path_flush_cmd_v1 { uint32_t queues_ctl; uint16_t flush_ctl; uint16_t reserved; } __packed; /* IWM_TX_PATH_FLUSH_CMD_API_S_VER_1 */ /** * struct iwl_tx_path_flush_cmd -- queue/FIFO flush command * @sta_id: station ID to flush * @tid_mask: TID mask to flush * @reserved: reserved */ struct iwm_tx_path_flush_cmd { uint32_t sta_id; uint16_t tid_mask; uint16_t reserved; } __packed; /* TX_PATH_FLUSH_CMD_API_S_VER_2 */ /** * iwm_get_scd_ssn - returns the SSN of the SCD * @tx_resp: the Tx response from the fw (agg or non-agg) * * When the fw sends an AMPDU, it fetches the MPDUs one after the other. Since * it can't know that everything will go well until the end of the AMPDU, it * can't know in advance the number of MPDUs that will be sent in the current * batch. This is why it writes the agg Tx response while it fetches the MPDUs. * Hence, it can't know in advance what the SSN of the SCD will be at the end * of the batch. This is why the SSN of the SCD is written at the end of the * whole struct at a variable offset. This function knows how to cope with the * variable offset and returns the SSN of the SCD. */ static inline uint32_t iwm_get_scd_ssn(struct iwm_tx_resp *tx_resp) { return le32_to_cpup((uint32_t *)&tx_resp->status + tx_resp->frame_count) & 0xfff; } /* * END mvm/fw-api-tx.h */ /* * BEGIN mvm/fw-api-scan.h */ /** * struct iwm_scd_txq_cfg_cmd - New txq hw scheduler config command * @token: * @sta_id: station id * @tid: * @scd_queue: scheduler queue to confiug * @enable: 1 queue enable, 0 queue disable * @aggregate: 1 aggregated queue, 0 otherwise * @tx_fifo: %enum iwm_tx_fifo * @window: BA window size * @ssn: SSN for the BA agreement */ struct iwm_scd_txq_cfg_cmd { uint8_t token; uint8_t sta_id; uint8_t tid; uint8_t scd_queue; uint8_t enable; uint8_t aggregate; uint8_t tx_fifo; uint8_t window; uint16_t ssn; uint16_t reserved; } __packed; /* SCD_QUEUE_CFG_CMD_API_S_VER_1 */ /** * struct iwm_scd_txq_cfg_rsp * @token: taken from the command * @sta_id: station id from the command * @tid: tid from the command * @scd_queue: scd_queue from the command */ struct iwm_scd_txq_cfg_rsp { uint8_t token; uint8_t sta_id; uint8_t tid; uint8_t scd_queue; } __packed; /* SCD_QUEUE_CFG_RSP_API_S_VER_1 */ /* Scan Commands, Responses, Notifications */ /* Masks for iwm_scan_channel.type flags */ #define IWM_SCAN_CHANNEL_TYPE_ACTIVE (1 << 0) #define IWM_SCAN_CHANNEL_NSSIDS(x) (((1 << (x)) - 1) << 1) /* Max number of IEs for direct SSID scans in a command */ #define IWM_PROBE_OPTION_MAX 20 /** * struct iwm_ssid_ie - directed scan network information element * * Up to 20 of these may appear in IWM_REPLY_SCAN_CMD, * selected by "type" bit field in struct iwm_scan_channel; * each channel may select different ssids from among the 20 entries. * SSID IEs get transmitted in reverse order of entry. */ struct iwm_ssid_ie { uint8_t id; uint8_t len; uint8_t ssid[IEEE80211_NWID_LEN]; } __packed; /* IWM_SCAN_DIRECT_SSID_IE_API_S_VER_1 */ /* scan offload */ #define IWM_SCAN_MAX_BLACKLIST_LEN 64 #define IWM_SCAN_SHORT_BLACKLIST_LEN 16 #define IWM_SCAN_MAX_PROFILES 11 #define IWM_SCAN_OFFLOAD_PROBE_REQ_SIZE 512 /* Default watchdog (in MS) for scheduled scan iteration */ #define IWM_SCHED_SCAN_WATCHDOG cpu_to_le16(15000) #define IWM_GOOD_CRC_TH_DEFAULT cpu_to_le16(1) #define IWM_CAN_ABORT_STATUS 1 #define IWM_FULL_SCAN_MULTIPLIER 5 #define IWM_FAST_SCHED_SCAN_ITERATIONS 3 #define IWM_MAX_SCHED_SCAN_PLANS 2 /** * iwm_scan_schedule_lmac - schedule of scan offload * @delay: delay between iterations, in seconds. * @iterations: num of scan iterations * @full_scan_mul: number of partial scans before each full scan */ struct iwm_scan_schedule_lmac { uint16_t delay; uint8_t iterations; uint8_t full_scan_mul; } __packed; /* SCAN_SCHEDULE_API_S */ /** * iwm_scan_req_tx_cmd - SCAN_REQ_TX_CMD_API_S * @tx_flags: combination of TX_CMD_FLG_* * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is * cleared. Combination of RATE_MCS_* * @sta_id: index of destination station in FW station table * @reserved: for alignment and future use */ struct iwm_scan_req_tx_cmd { uint32_t tx_flags; uint32_t rate_n_flags; uint8_t sta_id; uint8_t reserved[3]; } __packed; #define IWM_UNIFIED_SCAN_CHANNEL_FULL (1 << 27) #define IWM_UNIFIED_SCAN_CHANNEL_PARTIAL (1 << 28) /** * iwm_scan_channel_cfg_lmac - SCAN_CHANNEL_CFG_S_VER2 * @flags: bits 1-20: directed scan to i'th ssid * other bits &enum iwm_scan_channel_flags_lmac * @channel_number: channel number 1-13 etc * @iter_count: scan iteration on this channel * @iter_interval: interval in seconds between iterations on one channel */ struct iwm_scan_channel_cfg_lmac { uint32_t flags; uint16_t channel_num; uint16_t iter_count; uint32_t iter_interval; } __packed; /* * iwm_scan_probe_segment - PROBE_SEGMENT_API_S_VER_1 * @offset: offset in the data block * @len: length of the segment */ struct iwm_scan_probe_segment { uint16_t offset; uint16_t len; } __packed; /* iwm_scan_probe_req - PROBE_REQUEST_FRAME_API_S_VER_2 * @mac_header: first (and common) part of the probe * @band_data: band specific data * @common_data: last (and common) part of the probe * @buf: raw data block */ struct iwm_scan_probe_req_v1 { struct iwm_scan_probe_segment mac_header; struct iwm_scan_probe_segment band_data[2]; struct iwm_scan_probe_segment common_data; uint8_t buf[IWM_SCAN_OFFLOAD_PROBE_REQ_SIZE]; } __packed; /* iwl_scan_probe_req - PROBE_REQUEST_FRAME_API_S_VER_v2 * @mac_header: first (and common) part of the probe * @band_data: band specific data * @common_data: last (and common) part of the probe * @buf: raw data block */ struct iwm_scan_probe_req { struct iwm_scan_probe_segment mac_header; struct iwm_scan_probe_segment band_data[3]; struct iwm_scan_probe_segment common_data; uint8_t buf[IWM_SCAN_OFFLOAD_PROBE_REQ_SIZE]; } __packed; #define IWM_SCAN_CHANNEL_FLAG_EBS (1 << 0) #define IWM_SCAN_CHANNEL_FLAG_EBS_ACCURATE (1 << 1) #define IWM_SCAN_CHANNEL_FLAG_CACHE_ADD (1 << 2) /* iwm_scan_channel_opt - CHANNEL_OPTIMIZATION_API_S * @flags: enum iwm_scan_channel_flags * @non_ebs_ratio: defines the ratio of number of scan iterations where EBS is * involved. * 1 - EBS is disabled. * 2 - every second scan will be full scan(and so on). */ struct iwm_scan_channel_opt { uint16_t flags; uint16_t non_ebs_ratio; } __packed; /** * LMAC scan flags * @IWM_LMAC_SCAN_FLAG_PASS_ALL: pass all beacons and probe responses * without filtering. * @IWM_LMAC_SCAN_FLAG_PASSIVE: force passive scan on all channels * @IWM_LMAC_SCAN_FLAG_PRE_CONNECTION: single channel scan * @IWM_LMAC_SCAN_FLAG_ITER_COMPLETE: send iteration complete notification * @IWM_LMAC_SCAN_FLAG_MULTIPLE_SSIDS multiple SSID matching * @IWM_LMAC_SCAN_FLAG_FRAGMENTED: all passive scans will be fragmented * @IWM_LMAC_SCAN_FLAGS_RRM_ENABLED: insert WFA vendor-specific TPC report * and DS parameter set IEs into probe requests. * @IWM_LMAC_SCAN_FLAG_EXTENDED_DWELL: use extended dwell time on channels * 1, 6 and 11. * @IWM_LMAC_SCAN_FLAG_MATCH: Send match found notification on matches */ #define IWM_LMAC_SCAN_FLAG_PASS_ALL (1 << 0) #define IWM_LMAC_SCAN_FLAG_PASSIVE (1 << 1) #define IWM_LMAC_SCAN_FLAG_PRE_CONNECTION (1 << 2) #define IWM_LMAC_SCAN_FLAG_ITER_COMPLETE (1 << 3) #define IWM_LMAC_SCAN_FLAG_MULTIPLE_SSIDS (1 << 4) #define IWM_LMAC_SCAN_FLAG_FRAGMENTED (1 << 5) #define IWM_LMAC_SCAN_FLAGS_RRM_ENABLED (1 << 6) #define IWM_LMAC_SCAN_FLAG_EXTENDED_DWELL (1 << 7) #define IWM_LMAC_SCAN_FLAG_MATCH (1 << 9) #define IWM_SCAN_PRIORITY_LOW 0 #define IWM_SCAN_PRIORITY_MEDIUM 1 #define IWM_SCAN_PRIORITY_HIGH 2 /** * iwm_scan_req_lmac - SCAN_REQUEST_CMD_API_S_VER_1 * @reserved1: for alignment and future use * @channel_num: num of channels to scan * @active-dwell: dwell time for active channels * @passive-dwell: dwell time for passive channels * @fragmented-dwell: dwell time for fragmented passive scan * @extended_dwell: dwell time for channels 1, 6 and 11 (in certain cases) * @reserved2: for alignment and future use * @rx_chain_selct: PHY_RX_CHAIN_* flags * @scan_flags: &enum iwm_lmac_scan_flags * @max_out_time: max time (in TU) to be out of associated channel * @suspend_time: pause scan this long (TUs) when returning to service channel * @flags: RXON flags * @filter_flags: RXON filter * @tx_cmd: tx command for active scan; for 2GHz and for 5GHz * @direct_scan: list of SSIDs for directed active scan * @scan_prio: enum iwm_scan_priority * @iter_num: number of scan iterations * @delay: delay in seconds before first iteration * @schedule: two scheduling plans. The first one is finite, the second one can * be infinite. * @channel_opt: channel optimization options, for full and partial scan * @data: channel configuration and probe request packet. */ struct iwm_scan_req_lmac { /* SCAN_REQUEST_FIXED_PART_API_S_VER_7 */ uint32_t reserved1; uint8_t n_channels; uint8_t active_dwell; uint8_t passive_dwell; uint8_t fragmented_dwell; uint8_t extended_dwell; uint8_t reserved2; uint16_t rx_chain_select; uint32_t scan_flags; uint32_t max_out_time; uint32_t suspend_time; /* RX_ON_FLAGS_API_S_VER_1 */ uint32_t flags; uint32_t filter_flags; struct iwm_scan_req_tx_cmd tx_cmd[2]; struct iwm_ssid_ie direct_scan[IWM_PROBE_OPTION_MAX]; uint32_t scan_prio; /* SCAN_REQ_PERIODIC_PARAMS_API_S */ uint32_t iter_num; uint32_t delay; struct iwm_scan_schedule_lmac schedule[IWM_MAX_SCHED_SCAN_PLANS]; struct iwm_scan_channel_opt channel_opt[2]; uint8_t data[]; } __packed; /** * iwm_scan_offload_complete - PERIODIC_SCAN_COMPLETE_NTF_API_S_VER_2 * @last_schedule_line: last schedule line executed (fast or regular) * @last_schedule_iteration: last scan iteration executed before scan abort * @status: enum iwm_scan_offload_complete_status * @ebs_status: EBS success status &enum iwm_scan_ebs_status * @time_after_last_iter; time in seconds elapsed after last iteration */ struct iwm_periodic_scan_complete { uint8_t last_schedule_line; uint8_t last_schedule_iteration; uint8_t status; uint8_t ebs_status; uint32_t time_after_last_iter; uint32_t reserved; } __packed; /** * struct iwm_scan_results_notif - scan results for one channel - * SCAN_RESULT_NTF_API_S_VER_3 * @channel: which channel the results are from * @band: 0 for 5.2 GHz, 1 for 2.4 GHz * @probe_status: IWM_SCAN_PROBE_STATUS_*, indicates success of probe request * @num_probe_not_sent: # of request that weren't sent due to not enough time * @duration: duration spent in channel, in usecs */ struct iwm_scan_results_notif { uint8_t channel; uint8_t band; uint8_t probe_status; uint8_t num_probe_not_sent; uint32_t duration; } __packed; #define IWM_SCAN_CLIENT_SCHED_SCAN (1 << 0) #define IWM_SCAN_CLIENT_NETDETECT (1 << 1) #define IWM_SCAN_CLIENT_ASSET_TRACKING (1 << 2) /** * iwm_scan_offload_blacklist - IWM_SCAN_OFFLOAD_BLACKLIST_S * @ssid: MAC address to filter out * @reported_rssi: AP rssi reported to the host * @client_bitmap: clients ignore this entry - enum scan_framework_client */ struct iwm_scan_offload_blacklist { uint8_t ssid[ETHER_ADDR_LEN]; uint8_t reported_rssi; uint8_t client_bitmap; } __packed; #define IWM_NETWORK_TYPE_BSS 1 #define IWM_NETWORK_TYPE_IBSS 2 #define IWM_NETWORK_TYPE_ANY 3 #define IWM_SCAN_OFFLOAD_SELECT_2_4 0x4 #define IWM_SCAN_OFFLOAD_SELECT_5_2 0x8 #define IWM_SCAN_OFFLOAD_SELECT_ANY 0xc /** * iwm_scan_offload_profile - IWM_SCAN_OFFLOAD_PROFILE_S * @ssid_index: index to ssid list in fixed part * @unicast_cipher: encryption olgorithm to match - bitmap * @aut_alg: authentication olgorithm to match - bitmap * @network_type: enum iwm_scan_offload_network_type * @band_selection: enum iwm_scan_offload_band_selection * @client_bitmap: clients waiting for match - enum scan_framework_client */ struct iwm_scan_offload_profile { uint8_t ssid_index; uint8_t unicast_cipher; uint8_t auth_alg; uint8_t network_type; uint8_t band_selection; uint8_t client_bitmap; uint8_t reserved[2]; } __packed; /** * iwm_scan_offload_profile_cfg - IWM_SCAN_OFFLOAD_PROFILES_CFG_API_S_VER_1 * @blaclist: AP list to filter off from scan results * @profiles: profiles to search for match * @blacklist_len: length of blacklist * @num_profiles: num of profiles in the list * @match_notify: clients waiting for match found notification * @pass_match: clients waiting for the results * @active_clients: active clients bitmap - enum scan_framework_client * @any_beacon_notify: clients waiting for match notification without match */ struct iwm_scan_offload_profile_cfg { struct iwm_scan_offload_profile profiles[IWM_SCAN_MAX_PROFILES]; uint8_t blacklist_len; uint8_t num_profiles; uint8_t match_notify; uint8_t pass_match; uint8_t active_clients; uint8_t any_beacon_notify; uint8_t reserved[2]; } __packed; enum iwm_scan_offload_complete_status { IWM_SCAN_OFFLOAD_COMPLETED = 1, IWM_SCAN_OFFLOAD_ABORTED = 2, }; enum iwm_scan_ebs_status { IWM_SCAN_EBS_SUCCESS, IWM_SCAN_EBS_FAILED, IWM_SCAN_EBS_CHAN_NOT_FOUND, IWM_SCAN_EBS_INACTIVE, }; /** * struct iwm_lmac_scan_complete_notif - notifies end of scanning (all channels) * SCAN_COMPLETE_NTF_API_S_VER_3 * @scanned_channels: number of channels scanned (and number of valid results) * @status: one of SCAN_COMP_STATUS_* * @bt_status: BT on/off status * @last_channel: last channel that was scanned * @tsf_low: TSF timer (lower half) in usecs * @tsf_high: TSF timer (higher half) in usecs * @results: an array of scan results, only "scanned_channels" of them are valid */ struct iwm_lmac_scan_complete_notif { uint8_t scanned_channels; uint8_t status; uint8_t bt_status; uint8_t last_channel; uint32_t tsf_low; uint32_t tsf_high; struct iwm_scan_results_notif results[]; } __packed; /* UMAC Scan API */ /* The maximum of either of these cannot exceed 8, because we use an * 8-bit mask (see IWM_SCAN_MASK). */ #define IWM_MAX_UMAC_SCANS 8 #define IWM_MAX_LMAC_SCANS 1 #define IWM_SCAN_CONFIG_FLAG_ACTIVATE (1 << 0) #define IWM_SCAN_CONFIG_FLAG_DEACTIVATE (1 << 1) #define IWM_SCAN_CONFIG_FLAG_FORBID_CHUB_REQS (1 << 2) #define IWM_SCAN_CONFIG_FLAG_ALLOW_CHUB_REQS (1 << 3) #define IWM_SCAN_CONFIG_FLAG_SET_TX_CHAINS (1 << 8) #define IWM_SCAN_CONFIG_FLAG_SET_RX_CHAINS (1 << 9) #define IWM_SCAN_CONFIG_FLAG_SET_AUX_STA_ID (1 << 10) #define IWM_SCAN_CONFIG_FLAG_SET_ALL_TIMES (1 << 11) #define IWM_SCAN_CONFIG_FLAG_SET_EFFECTIVE_TIMES (1 << 12) #define IWM_SCAN_CONFIG_FLAG_SET_CHANNEL_FLAGS (1 << 13) #define IWM_SCAN_CONFIG_FLAG_SET_LEGACY_RATES (1 << 14) #define IWM_SCAN_CONFIG_FLAG_SET_MAC_ADDR (1 << 15) #define IWM_SCAN_CONFIG_FLAG_SET_FRAGMENTED (1 << 16) #define IWM_SCAN_CONFIG_FLAG_CLEAR_FRAGMENTED (1 << 17) #define IWM_SCAN_CONFIG_FLAG_SET_CAM_MODE (1 << 18) #define IWM_SCAN_CONFIG_FLAG_CLEAR_CAM_MODE (1 << 19) #define IWM_SCAN_CONFIG_FLAG_SET_PROMISC_MODE (1 << 20) #define IWM_SCAN_CONFIG_FLAG_CLEAR_PROMISC_MODE (1 << 21) /* Bits 26-31 are for num of channels in channel_array */ #define IWM_SCAN_CONFIG_N_CHANNELS(n) ((n) << 26) /* OFDM basic rates */ #define IWM_SCAN_CONFIG_RATE_6M (1 << 0) #define IWM_SCAN_CONFIG_RATE_9M (1 << 1) #define IWM_SCAN_CONFIG_RATE_12M (1 << 2) #define IWM_SCAN_CONFIG_RATE_18M (1 << 3) #define IWM_SCAN_CONFIG_RATE_24M (1 << 4) #define IWM_SCAN_CONFIG_RATE_36M (1 << 5) #define IWM_SCAN_CONFIG_RATE_48M (1 << 6) #define IWM_SCAN_CONFIG_RATE_54M (1 << 7) /* CCK basic rates */ #define IWM_SCAN_CONFIG_RATE_1M (1 << 8) #define IWM_SCAN_CONFIG_RATE_2M (1 << 9) #define IWM_SCAN_CONFIG_RATE_5M (1 << 10) #define IWM_SCAN_CONFIG_RATE_11M (1 << 11) /* Bits 16-27 are for supported rates */ #define IWM_SCAN_CONFIG_SUPPORTED_RATE(rate) ((rate) << 16) #define IWM_CHANNEL_FLAG_EBS (1 << 0) #define IWM_CHANNEL_FLAG_ACCURATE_EBS (1 << 1) #define IWM_CHANNEL_FLAG_EBS_ADD (1 << 2) #define IWM_CHANNEL_FLAG_PRE_SCAN_PASSIVE2ACTIVE (1 << 3) /** * struct iwm_scan_config * @flags: enum scan_config_flags * @tx_chains: valid_tx antenna - ANT_* definitions * @rx_chains: valid_rx antenna - ANT_* definitions * @legacy_rates: default legacy rates - enum scan_config_rates * @out_of_channel_time: default max out of serving channel time * @suspend_time: default max suspend time * @dwell_active: default dwell time for active scan * @dwell_passive: default dwell time for passive scan * @dwell_fragmented: default dwell time for fragmented scan * @dwell_extended: default dwell time for channels 1, 6 and 11 * @mac_addr: default mac address to be used in probes * @bcast_sta_id: the index of the station in the fw * @channel_flags: default channel flags - enum iwm_channel_flags * scan_config_channel_flag * @channel_array: default supported channels */ struct iwm_scan_config { uint32_t flags; uint32_t tx_chains; uint32_t rx_chains; uint32_t legacy_rates; uint32_t out_of_channel_time; uint32_t suspend_time; uint8_t dwell_active; uint8_t dwell_passive; uint8_t dwell_fragmented; uint8_t dwell_extended; uint8_t mac_addr[ETHER_ADDR_LEN]; uint8_t bcast_sta_id; uint8_t channel_flags; uint8_t channel_array[]; } __packed; /* SCAN_CONFIG_DB_CMD_API_S */ /** * iwm_umac_scan_flags *@IWM_UMAC_SCAN_FLAG_PREEMPTIVE: scan process triggered by this scan request * can be preempted by other scan requests with higher priority. * The low priority scan will be resumed when the higher proirity scan is * completed. *@IWM_UMAC_SCAN_FLAG_START_NOTIF: notification will be sent to the driver * when scan starts. */ #define IWM_UMAC_SCAN_FLAG_PREEMPTIVE (1 << 0) #define IWM_UMAC_SCAN_FLAG_START_NOTIF (1 << 1) #define IWM_UMAC_SCAN_UID_TYPE_OFFSET 0 #define IWM_UMAC_SCAN_UID_SEQ_OFFSET 8 #define IWM_UMAC_SCAN_GEN_FLAGS_PERIODIC (1 << 0) #define IWM_UMAC_SCAN_GEN_FLAGS_OVER_BT (1 << 1) #define IWM_UMAC_SCAN_GEN_FLAGS_PASS_ALL (1 << 2) #define IWM_UMAC_SCAN_GEN_FLAGS_PASSIVE (1 << 3) #define IWM_UMAC_SCAN_GEN_FLAGS_PRE_CONNECT (1 << 4) #define IWM_UMAC_SCAN_GEN_FLAGS_ITER_COMPLETE (1 << 5) #define IWM_UMAC_SCAN_GEN_FLAGS_MULTIPLE_SSID (1 << 6) #define IWM_UMAC_SCAN_GEN_FLAGS_FRAGMENTED (1 << 7) #define IWM_UMAC_SCAN_GEN_FLAGS_RRM_ENABLED (1 << 8) #define IWM_UMAC_SCAN_GEN_FLAGS_MATCH (1 << 9) #define IWM_UMAC_SCAN_GEN_FLAGS_EXTENDED_DWELL (1 << 10) /* Extended dwell is obselete when adaptive dwell is used, making this * bit reusable. Hence, probe request defer is used only when adaptive * dwell is supported. */ #define IWM_UMAC_SCAN_GEN_FLAGS_PROB_REQ_DEFER_SUPP (1 << 10) #define IWM_UMAC_SCAN_GEN_FLAGS_LMAC2_FRAGMENTED (1 << 11) #define IWM_UMAC_SCAN_GEN_FLAGS_ADAPTIVE_DWELL (1 << 13) #define IWM_UMAC_SCAN_GEN_FLAGS_MAX_CHNL_TIME (1 << 14) #define IWM_UMAC_SCAN_GEN_FLAGS_PROB_REQ_HIGH_TX_RATE (1 << 15) /** * UMAC scan general flags #2 * @IWM_UMAC_SCAN_GEN_FLAGS2_NOTIF_PER_CHNL: Whether to send a complete * notification per channel or not. * @IWM_UMAC_SCAN_GEN_FLAGS2_ALLOW_CHNL_REORDER: Whether to allow channel * reorder optimization or not. */ #define IWM_UMAC_SCAN_GEN_FLAGS2_NOTIF_PER_CHNL (1 << 0) #define IWM_UMAC_SCAN_GEN_FLAGS2_ALLOW_CHNL_REORDER (1 << 1) /** * struct iwm_scan_channel_cfg_umac * @flags: bitmap - 0-19: directed scan to i'th ssid. * @channel_num: channel number 1-13 etc. * @iter_count: repetition count for the channel. * @iter_interval: interval between two scan iterations on one channel. */ struct iwm_scan_channel_cfg_umac { uint32_t flags; #define IWM_SCAN_CHANNEL_UMAC_NSSIDS(x) ((1 << (x)) - 1) uint8_t channel_num; uint8_t iter_count; uint16_t iter_interval; } __packed; /* SCAN_CHANNEL_CFG_S_VER1 */ /** * struct iwm_scan_umac_schedule * @interval: interval in seconds between scan iterations * @iter_count: num of scan iterations for schedule plan, 0xff for infinite loop * @reserved: for alignment and future use */ struct iwm_scan_umac_schedule { uint16_t interval; uint8_t iter_count; uint8_t reserved; } __packed; /* SCAN_SCHED_PARAM_API_S_VER_1 */ /** * struct iwm_scan_req_umac_tail - the rest of the UMAC scan request command * parameters following channels configuration array. * @schedule: two scheduling plans. * @delay: delay in TUs before starting the first scan iteration * @reserved: for future use and alignment * @preq: probe request with IEs blocks * @direct_scan: list of SSIDs for directed active scan */ struct iwm_scan_req_umac_tail_v1 { /* SCAN_PERIODIC_PARAMS_API_S_VER_1 */ struct iwm_scan_umac_schedule schedule[IWM_MAX_SCHED_SCAN_PLANS]; uint16_t delay; uint16_t reserved; /* SCAN_PROBE_PARAMS_API_S_VER_1 */ struct iwm_scan_probe_req_v1 preq; struct iwm_ssid_ie direct_scan[IWM_PROBE_OPTION_MAX]; } __packed; /** * struct iwm_scan_req_umac_tail - the rest of the UMAC scan request command * parameters following channels configuration array. * @schedule: two scheduling plans. * @delay: delay in TUs before starting the first scan iteration * @reserved: for future use and alignment * @preq: probe request with IEs blocks * @direct_scan: list of SSIDs for directed active scan */ struct iwm_scan_req_umac_tail_v2 { /* SCAN_PERIODIC_PARAMS_API_S_VER_1 */ struct iwm_scan_umac_schedule schedule[IWM_MAX_SCHED_SCAN_PLANS]; uint16_t delay; uint16_t reserved; /* SCAN_PROBE_PARAMS_API_S_VER_2 */ struct iwm_scan_probe_req preq; struct iwm_ssid_ie direct_scan[IWM_PROBE_OPTION_MAX]; } __packed; /** * struct iwm_scan_umac_chan_param * @flags: channel flags &enum iwl_scan_channel_flags * @count: num of channels in scan request * @reserved: for future use and alignment */ struct iwm_scan_umac_chan_param { uint8_t flags; uint8_t count; uint16_t reserved; } __packed; /* SCAN_CHANNEL_PARAMS_API_S_VER_1 */ #define IWM_SCAN_LB_LMAC_IDX 0 #define IWM_SCAN_HB_LMAC_IDX 1 /** * struct iwm_scan_req_umac * @flags: &enum iwl_umac_scan_flags * @uid: scan id, &enum iwl_umac_scan_uid_offsets * @ooc_priority: out of channel priority - &enum iwl_scan_priority * @general_flags: &enum iwl_umac_scan_general_flags * @scan_start_mac_id: report the scan start TSF time according to this mac TSF * @extended_dwell: dwell time for channels 1, 6 and 11 * @active_dwell: dwell time for active scan per LMAC * @passive_dwell: dwell time for passive scan per LMAC * @fragmented_dwell: dwell time for fragmented passive scan * @adwell_default_n_aps: for adaptive dwell the default number of APs * per channel * @adwell_default_n_aps_social: for adaptive dwell the default * number of APs per social (1,6,11) channel * @general_flags2: &enum iwl_umac_scan_general_flags2 * @adwell_max_budget: for adaptive dwell the maximal budget of TU to be added * to total scan time * @max_out_time: max out of serving channel time, per LMAC - for CDB there * are 2 LMACs (high band and low band) * @suspend_time: max suspend time, per LMAC - for CDB there are 2 LMACs * @scan_priority: scan internal prioritization &enum iwl_scan_priority * @num_of_fragments: Number of fragments needed for full coverage per band. * Relevant only for fragmented scan. * @channel: &struct iwm_scan_umac_chan_param * @reserved: for future use and alignment * @reserved3: for future use and alignment * @data: &struct iwm_scan_channel_cfg_umac and * &struct iwm_scan_req_umac_tail */ struct iwm_scan_req_umac { uint32_t flags; uint32_t uid; uint32_t ooc_priority; /* SCAN_GENERAL_PARAMS_API_S_VER_1 */ uint16_t general_flags; uint8_t reserved; uint8_t scan_start_mac_id; union { struct { uint8_t extended_dwell; uint8_t active_dwell; uint8_t passive_dwell; uint8_t fragmented_dwell; uint32_t max_out_time; uint32_t suspend_time; uint32_t scan_priority; struct iwm_scan_umac_chan_param channel; uint8_t data[]; } v1; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_1 */ struct { uint8_t extended_dwell; uint8_t active_dwell; uint8_t passive_dwell; uint8_t fragmented_dwell; uint32_t max_out_time[2]; uint32_t suspend_time[2]; uint32_t scan_priority; struct iwm_scan_umac_chan_param channel; uint8_t data[]; } v6; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_6 */ struct { uint8_t active_dwell; uint8_t passive_dwell; uint8_t fragmented_dwell; uint8_t adwell_default_n_aps; uint8_t adwell_default_n_aps_social; uint8_t reserved3; uint16_t adwell_max_budget; uint32_t max_out_time[2]; uint32_t suspend_time[2]; uint32_t scan_priority; struct iwm_scan_umac_chan_param channel; uint8_t data[]; } v7; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_7 */ struct { uint8_t active_dwell[2]; uint8_t reserved2; uint8_t adwell_default_n_aps; uint8_t adwell_default_n_aps_social; uint8_t general_flags2; uint16_t adwell_max_budget; uint32_t max_out_time[2]; uint32_t suspend_time[2]; uint32_t scan_priority; uint8_t passive_dwell[2]; uint8_t num_of_fragments[2]; struct iwm_scan_umac_chan_param channel; uint8_t data[]; } v8; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_8 */ struct { uint8_t active_dwell[2]; uint8_t adwell_default_hb_n_aps; uint8_t adwell_default_lb_n_aps; uint8_t adwell_default_n_aps_social; uint8_t general_flags2; uint16_t adwell_max_budget; uint32_t max_out_time[2]; uint32_t suspend_time[2]; uint32_t scan_priority; uint8_t passive_dwell[2]; uint8_t num_of_fragments[2]; struct iwm_scan_umac_chan_param channel; uint8_t data[]; } v9; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_9 */ }; } __packed; #define IWM_SCAN_REQ_UMAC_SIZE_V8 sizeof(struct iwm_scan_req_umac) #define IWM_SCAN_REQ_UMAC_SIZE_V7 48 #define IWM_SCAN_REQ_UMAC_SIZE_V6 44 #define IWM_SCAN_REQ_UMAC_SIZE_V1 36 /** * struct iwm_umac_scan_abort * @uid: scan id, &enum iwm_umac_scan_uid_offsets * @flags: reserved */ struct iwm_umac_scan_abort { uint32_t uid; uint32_t flags; } __packed; /* SCAN_ABORT_CMD_UMAC_API_S_VER_1 */ /** * struct iwm_umac_scan_complete * @uid: scan id, &enum iwm_umac_scan_uid_offsets * @last_schedule: last scheduling line * @last_iter: last scan iteration number * @scan status: &enum iwm_scan_offload_complete_status * @ebs_status: &enum iwm_scan_ebs_status * @time_from_last_iter: time elapsed from last iteration * @reserved: for future use */ struct iwm_umac_scan_complete { uint32_t uid; uint8_t last_schedule; uint8_t last_iter; uint8_t status; uint8_t ebs_status; uint32_t time_from_last_iter; uint32_t reserved; } __packed; /* SCAN_COMPLETE_NTF_UMAC_API_S_VER_1 */ #define IWM_SCAN_OFFLOAD_MATCHING_CHANNELS_LEN 5 /** * struct iwm_scan_offload_profile_match - match information * @bssid: matched bssid * @channel: channel where the match occurred * @energy: * @matching_feature: * @matching_channels: bitmap of channels that matched, referencing * the channels passed in tue scan offload request */ struct iwm_scan_offload_profile_match { uint8_t bssid[ETHER_ADDR_LEN]; uint16_t reserved; uint8_t channel; uint8_t energy; uint8_t matching_feature; uint8_t matching_channels[IWM_SCAN_OFFLOAD_MATCHING_CHANNELS_LEN]; } __packed; /* SCAN_OFFLOAD_PROFILE_MATCH_RESULTS_S_VER_1 */ /** * struct iwm_scan_offload_profiles_query - match results query response * @matched_profiles: bitmap of matched profiles, referencing the * matches passed in the scan offload request * @last_scan_age: age of the last offloaded scan * @n_scans_done: number of offloaded scans done * @gp2_d0u: GP2 when D0U occurred * @gp2_invoked: GP2 when scan offload was invoked * @resume_while_scanning: not used * @self_recovery: obsolete * @reserved: reserved * @matches: array of match information, one for each match */ struct iwm_scan_offload_profiles_query { uint32_t matched_profiles; uint32_t last_scan_age; uint32_t n_scans_done; uint32_t gp2_d0u; uint32_t gp2_invoked; uint8_t resume_while_scanning; uint8_t self_recovery; uint16_t reserved; struct iwm_scan_offload_profile_match matches[IWM_SCAN_MAX_PROFILES]; } __packed; /* SCAN_OFFLOAD_PROFILES_QUERY_RSP_S_VER_2 */ /** * struct iwm_umac_scan_iter_complete_notif - notifies end of scanning iteration * @uid: scan id, &enum iwm_umac_scan_uid_offsets * @scanned_channels: number of channels scanned and number of valid elements in * results array * @status: one of SCAN_COMP_STATUS_* * @bt_status: BT on/off status * @last_channel: last channel that was scanned * @tsf_low: TSF timer (lower half) in usecs * @tsf_high: TSF timer (higher half) in usecs * @results: array of scan results, only "scanned_channels" of them are valid */ struct iwm_umac_scan_iter_complete_notif { uint32_t uid; uint8_t scanned_channels; uint8_t status; uint8_t bt_status; uint8_t last_channel; uint32_t tsf_low; uint32_t tsf_high; struct iwm_scan_results_notif results[]; } __packed; /* SCAN_ITER_COMPLETE_NTF_UMAC_API_S_VER_1 */ #define IWM_GSCAN_START_CMD 0x0 #define IWM_GSCAN_STOP_CMD 0x1 #define IWM_GSCAN_SET_HOTLIST_CMD 0x2 #define IWM_GSCAN_RESET_HOTLIST_CMD 0x3 #define IWM_GSCAN_SET_SIGNIFICANT_CHANGE_CMD 0x4 #define IWM_GSCAN_RESET_SIGNIFICANT_CHANGE_CMD 0x5 #define IWM_GSCAN_SIGNIFICANT_CHANGE_EVENT 0xFD #define IWM_GSCAN_HOTLIST_CHANGE_EVENT 0xFE #define IWM_GSCAN_RESULTS_AVAILABLE_EVENT 0xFF /* * END mvm/fw-api-scan.h */ /* * BEGIN mvm/fw-api-sta.h */ /* STA API */ /** * flags for the ADD_STA host command * @IWM_STA_FLG_REDUCED_TX_PWR_CTRL: * @IWM_STA_FLG_REDUCED_TX_PWR_DATA: * @IWM_STA_FLG_DISABLE_TX: set if TX should be disabled * @IWM_STA_FLG_PS: set if STA is in Power Save * @IWM_STA_FLG_INVALID: set if STA is invalid * @IWM_STA_FLG_DLP_EN: Direct Link Protocol is enabled * @IWM_STA_FLG_SET_ALL_KEYS: the current key applies to all key IDs * @IWM_STA_FLG_DRAIN_FLOW: drain flow * @IWM_STA_FLG_PAN: STA is for PAN interface * @IWM_STA_FLG_CLASS_AUTH: * @IWM_STA_FLG_CLASS_ASSOC: * @IWM_STA_FLG_CLASS_MIMO_PROT: * @IWM_STA_FLG_MAX_AGG_SIZE_MSK: maximal size for A-MPDU * @IWM_STA_FLG_AGG_MPDU_DENS_MSK: maximal MPDU density for Tx aggregation * @IWM_STA_FLG_FAT_EN_MSK: support for channel width (for Tx). This flag is * initialised by driver and can be updated by fw upon reception of * action frames that can change the channel width. When cleared the fw * will send all the frames in 20MHz even when FAT channel is requested. * @IWM_STA_FLG_MIMO_EN_MSK: support for MIMO. This flag is initialised by the * driver and can be updated by fw upon reception of action frames. * @IWM_STA_FLG_MFP_EN: Management Frame Protection */ #define IWM_STA_FLG_REDUCED_TX_PWR_CTRL (1 << 3) #define IWM_STA_FLG_REDUCED_TX_PWR_DATA (1 << 6) #define IWM_STA_FLG_DISABLE_TX (1 << 4) #define IWM_STA_FLG_PS (1 << 8) #define IWM_STA_FLG_DRAIN_FLOW (1 << 12) #define IWM_STA_FLG_PAN (1 << 13) #define IWM_STA_FLG_CLASS_AUTH (1 << 14) #define IWM_STA_FLG_CLASS_ASSOC (1 << 15) #define IWM_STA_FLG_RTS_MIMO_PROT (1 << 17) #define IWM_STA_FLG_MAX_AGG_SIZE_SHIFT 19 #define IWM_STA_FLG_MAX_AGG_SIZE_8K (0 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT) #define IWM_STA_FLG_MAX_AGG_SIZE_16K (1 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT) #define IWM_STA_FLG_MAX_AGG_SIZE_32K (2 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT) #define IWM_STA_FLG_MAX_AGG_SIZE_64K (3 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT) #define IWM_STA_FLG_MAX_AGG_SIZE_128K (4 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT) #define IWM_STA_FLG_MAX_AGG_SIZE_256K (5 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT) #define IWM_STA_FLG_MAX_AGG_SIZE_512K (6 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT) #define IWM_STA_FLG_MAX_AGG_SIZE_1024K (7 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT) #define IWM_STA_FLG_MAX_AGG_SIZE_MSK (7 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT) #define IWM_STA_FLG_AGG_MPDU_DENS_SHIFT 23 #define IWM_STA_FLG_AGG_MPDU_DENS_2US (4 << IWM_STA_FLG_AGG_MPDU_DENS_SHIFT) #define IWM_STA_FLG_AGG_MPDU_DENS_4US (5 << IWM_STA_FLG_AGG_MPDU_DENS_SHIFT) #define IWM_STA_FLG_AGG_MPDU_DENS_8US (6 << IWM_STA_FLG_AGG_MPDU_DENS_SHIFT) #define IWM_STA_FLG_AGG_MPDU_DENS_16US (7 << IWM_STA_FLG_AGG_MPDU_DENS_SHIFT) #define IWM_STA_FLG_AGG_MPDU_DENS_MSK (7 << IWM_STA_FLG_AGG_MPDU_DENS_SHIFT) #define IWM_STA_FLG_FAT_EN_20MHZ (0 << 26) #define IWM_STA_FLG_FAT_EN_40MHZ (1 << 26) #define IWM_STA_FLG_FAT_EN_80MHZ (2 << 26) #define IWM_STA_FLG_FAT_EN_160MHZ (3 << 26) #define IWM_STA_FLG_FAT_EN_MSK (3 << 26) #define IWM_STA_FLG_MIMO_EN_SISO (0 << 28) #define IWM_STA_FLG_MIMO_EN_MIMO2 (1 << 28) #define IWM_STA_FLG_MIMO_EN_MIMO3 (2 << 28) #define IWM_STA_FLG_MIMO_EN_MSK (3 << 28) /** * key flags for the ADD_STA host command * @IWM_STA_KEY_FLG_NO_ENC: no encryption * @IWM_STA_KEY_FLG_WEP: WEP encryption algorithm * @IWM_STA_KEY_FLG_CCM: CCMP encryption algorithm * @IWM_STA_KEY_FLG_TKIP: TKIP encryption algorithm * @IWM_STA_KEY_FLG_EXT: extended cipher algorithm (depends on the FW support) * @IWM_STA_KEY_FLG_CMAC: CMAC encryption algorithm * @IWM_STA_KEY_FLG_ENC_UNKNOWN: unknown encryption algorithm * @IWM_STA_KEY_FLG_EN_MSK: mask for encryption algorithmi value * @IWM_STA_KEY_FLG_WEP_KEY_MAP: wep is either a group key (0 - legacy WEP) or from * station info array (1 - n 1X mode) * @IWM_STA_KEY_FLG_KEYID_MSK: the index of the key * @IWM_STA_KEY_NOT_VALID: key is invalid * @IWM_STA_KEY_FLG_WEP_13BYTES: set for 13 bytes WEP key * @IWM_STA_KEY_MULTICAST: set for multicast key * @IWM_STA_KEY_MFP: key is used for Management Frame Protection */ #define IWM_STA_KEY_FLG_NO_ENC (0 << 0) #define IWM_STA_KEY_FLG_WEP (1 << 0) #define IWM_STA_KEY_FLG_CCM (2 << 0) #define IWM_STA_KEY_FLG_TKIP (3 << 0) #define IWM_STA_KEY_FLG_EXT (4 << 0) #define IWM_STA_KEY_FLG_CMAC (6 << 0) #define IWM_STA_KEY_FLG_ENC_UNKNOWN (7 << 0) #define IWM_STA_KEY_FLG_EN_MSK (7 << 0) #define IWM_STA_KEY_FLG_WEP_KEY_MAP (1 << 3) #define IWM_STA_KEY_FLG_KEYID_POS 8 #define IWM_STA_KEY_FLG_KEYID_MSK (3 << IWM_STA_KEY_FLG_KEYID_POS) #define IWM_STA_KEY_NOT_VALID (1 << 11) #define IWM_STA_KEY_FLG_WEP_13BYTES (1 << 12) #define IWM_STA_KEY_MULTICAST (1 << 14) #define IWM_STA_KEY_MFP (1 << 15) /** * indicate to the fw what flag are being changed * @IWM_STA_MODIFY_QUEUE_REMOVAL: this command removes a queue * @IWM_STA_MODIFY_TID_DISABLE_TX: this command modifies %tid_disable_tx * @IWM_STA_MODIFY_TX_RATE: unused * @IWM_STA_MODIFY_ADD_BA_TID: this command modifies %add_immediate_ba_tid * @IWM_STA_MODIFY_REMOVE_BA_TID: this command modifies %remove_immediate_ba_tid * @IWM_STA_MODIFY_SLEEPING_STA_TX_COUNT: this command modifies %sleep_tx_count * @IWM_STA_MODIFY_PROT_TH: * @IWM_STA_MODIFY_QUEUES: modify the queues used by this station */ #define IWM_STA_MODIFY_QUEUE_REMOVAL (1 << 0) #define IWM_STA_MODIFY_TID_DISABLE_TX (1 << 1) #define IWM_STA_MODIFY_TX_RATE (1 << 2) #define IWM_STA_MODIFY_ADD_BA_TID (1 << 3) #define IWM_STA_MODIFY_REMOVE_BA_TID (1 << 4) #define IWM_STA_MODIFY_SLEEPING_STA_TX_COUNT (1 << 5) #define IWM_STA_MODIFY_PROT_TH (1 << 6) #define IWM_STA_MODIFY_QUEUES (1 << 7) #define IWM_STA_MODE_MODIFY 1 /** * type of sleep of the station * @IWM_STA_SLEEP_STATE_AWAKE: * @IWM_STA_SLEEP_STATE_PS_POLL: * @IWM_STA_SLEEP_STATE_UAPSD: * @IWM_STA_SLEEP_STATE_MOREDATA: set more-data bit on * (last) released frame */ #define IWM_STA_SLEEP_STATE_AWAKE 0 #define IWM_STA_SLEEP_STATE_PS_POLL (1 << 0) #define IWM_STA_SLEEP_STATE_UAPSD (1 << 1) #define IWM_STA_SLEEP_STATE_MOREDATA (1 << 2) /* STA ID and color bits definitions */ #define IWM_STA_ID_SEED (0x0f) #define IWM_STA_ID_POS (0) #define IWM_STA_ID_MSK (IWM_STA_ID_SEED << IWM_STA_ID_POS) #define IWM_STA_COLOR_SEED (0x7) #define IWM_STA_COLOR_POS (4) #define IWM_STA_COLOR_MSK (IWM_STA_COLOR_SEED << IWM_STA_COLOR_POS) #define IWM_STA_ID_N_COLOR_GET_COLOR(id_n_color) \ (((id_n_color) & IWM_STA_COLOR_MSK) >> IWM_STA_COLOR_POS) #define IWM_STA_ID_N_COLOR_GET_ID(id_n_color) \ (((id_n_color) & IWM_STA_ID_MSK) >> IWM_STA_ID_POS) #define IWM_STA_KEY_MAX_NUM (16) #define IWM_STA_KEY_IDX_INVALID (0xff) #define IWM_STA_KEY_MAX_DATA_KEY_NUM (4) #define IWM_MAX_GLOBAL_KEYS (4) #define IWM_STA_KEY_LEN_WEP40 (5) #define IWM_STA_KEY_LEN_WEP104 (13) /** * struct iwm_keyinfo - key information * @key_flags: type %iwm_sta_key_flag * @tkip_rx_tsc_byte2: TSC[2] for key mix ph1 detection * @tkip_rx_ttak: 10-byte unicast TKIP TTAK for Rx * @key_offset: key offset in the fw's key table * @key: 16-byte unicast decryption key * @tx_secur_seq_cnt: initial RSC / PN needed for replay check * @hw_tkip_mic_rx_key: byte: MIC Rx Key - used for TKIP only * @hw_tkip_mic_tx_key: byte: MIC Tx Key - used for TKIP only */ struct iwm_keyinfo { uint16_t key_flags; uint8_t tkip_rx_tsc_byte2; uint8_t reserved1; uint16_t tkip_rx_ttak[5]; uint8_t key_offset; uint8_t reserved2; uint8_t key[16]; uint64_t tx_secur_seq_cnt; uint64_t hw_tkip_mic_rx_key; uint64_t hw_tkip_mic_tx_key; } __packed; #define IWM_ADD_STA_STATUS_MASK 0xFF #define IWM_ADD_STA_BAID_VALID_MASK 0x8000 #define IWM_ADD_STA_BAID_MASK 0x7F00 #define IWM_ADD_STA_BAID_SHIFT 8 /** * struct iwm_add_sta_cmd_v7 - Add/modify a station in the fw's sta table. * ( REPLY_ADD_STA = 0x18 ) * @add_modify: 1: modify existing, 0: add new station * @awake_acs: * @tid_disable_tx: is tid BIT(tid) enabled for Tx. Clear BIT(x) to enable * AMPDU for tid x. Set %IWM_STA_MODIFY_TID_DISABLE_TX to change this field. * @mac_id_n_color: the Mac context this station belongs to * @addr[ETHER_ADDR_LEN]: station's MAC address * @sta_id: index of station in uCode's station table * @modify_mask: IWM_STA_MODIFY_*, selects which parameters to modify vs. leave * alone. 1 - modify, 0 - don't change. * @station_flags: look at %iwm_sta_flags * @station_flags_msk: what of %station_flags have changed * @add_immediate_ba_tid: tid for which to add block-ack support (Rx) * Set %IWM_STA_MODIFY_ADD_BA_TID to use this field, and also set * add_immediate_ba_ssn. * @remove_immediate_ba_tid: tid for which to remove block-ack support (Rx) * Set %IWM_STA_MODIFY_REMOVE_BA_TID to use this field * @add_immediate_ba_ssn: ssn for the Rx block-ack session. Used together with * add_immediate_ba_tid. * @sleep_tx_count: number of packets to transmit to station even though it is * asleep. Used to synchronise PS-poll and u-APSD responses while ucode * keeps track of STA sleep state. * @sleep_state_flags: Look at %iwm_sta_sleep_flag. * @assoc_id: assoc_id to be sent in VHT PLCP (9-bit), for grp use 0, for AP * mac-addr. * @beamform_flags: beam forming controls * @tfd_queue_msk: tfd queues used by this station * * The device contains an internal table of per-station information, with info * on security keys, aggregation parameters, and Tx rates for initial Tx * attempt and any retries (set by IWM_REPLY_TX_LINK_QUALITY_CMD). * * ADD_STA sets up the table entry for one station, either creating a new * entry, or modifying a pre-existing one. */ struct iwm_add_sta_cmd_v7 { uint8_t add_modify; uint8_t awake_acs; uint16_t tid_disable_tx; uint32_t mac_id_n_color; uint8_t addr[ETHER_ADDR_LEN]; /* _STA_ID_MODIFY_INFO_API_S_VER_1 */ uint16_t reserved2; uint8_t sta_id; uint8_t modify_mask; uint16_t reserved3; uint32_t station_flags; uint32_t station_flags_msk; uint8_t add_immediate_ba_tid; uint8_t remove_immediate_ba_tid; uint16_t add_immediate_ba_ssn; uint16_t sleep_tx_count; uint16_t sleep_state_flags; uint16_t assoc_id; uint16_t beamform_flags; uint32_t tfd_queue_msk; } __packed; /* ADD_STA_CMD_API_S_VER_7 */ /** * struct iwm_add_sta_cmd - Add/modify a station in the fw's sta table. * ( REPLY_ADD_STA = 0x18 ) * @add_modify: see &enum iwl_sta_mode * @awake_acs: ACs to transmit data on while station is sleeping (for U-APSD) * @tid_disable_tx: is tid BIT(tid) enabled for Tx. Clear BIT(x) to enable * AMPDU for tid x. Set %STA_MODIFY_TID_DISABLE_TX to change this field. * @mac_id_n_color: the Mac context this station belongs to, * see &enum iwl_ctxt_id_and_color * @addr: station's MAC address * @reserved2: reserved * @sta_id: index of station in uCode's station table * @modify_mask: STA_MODIFY_*, selects which parameters to modify vs. leave * alone. 1 - modify, 0 - don't change. * @reserved3: reserved * @station_flags: look at &enum iwl_sta_flags * @station_flags_msk: what of %station_flags have changed, * also &enum iwl_sta_flags * @add_immediate_ba_tid: tid for which to add block-ack support (Rx) * Set %STA_MODIFY_ADD_BA_TID to use this field, and also set * add_immediate_ba_ssn. * @remove_immediate_ba_tid: tid for which to remove block-ack support (Rx) * Set %STA_MODIFY_REMOVE_BA_TID to use this field * @add_immediate_ba_ssn: ssn for the Rx block-ack session. Used together with * add_immediate_ba_tid. * @sleep_tx_count: number of packets to transmit to station even though it is * asleep. Used to synchronise PS-poll and u-APSD responses while ucode * keeps track of STA sleep state. * @station_type: type of this station. See &enum iwl_sta_type. * @sleep_state_flags: Look at &enum iwl_sta_sleep_flag. * @assoc_id: assoc_id to be sent in VHT PLCP (9-bit), for grp use 0, for AP * mac-addr. * @beamform_flags: beam forming controls * @tfd_queue_msk: tfd queues used by this station. * Obselete for new TX API (9 and above). * @rx_ba_window: aggregation window size * @sp_length: the size of the SP in actual number of frames * @uapsd_acs: 4 LS bits are trigger enabled ACs, 4 MS bits are the deliver * enabled ACs. * * The device contains an internal table of per-station information, with info * on security keys, aggregation parameters, and Tx rates for initial Tx * attempt and any retries (set by REPLY_TX_LINK_QUALITY_CMD). * * ADD_STA sets up the table entry for one station, either creating a new * entry, or modifying a pre-existing one. */ struct iwm_add_sta_cmd { uint8_t add_modify; uint8_t awake_acs; uint16_t tid_disable_tx; uint32_t mac_id_n_color; uint8_t addr[ETHER_ADDR_LEN]; /* _STA_ID_MODIFY_INFO_API_S_VER_1 */ uint16_t reserved2; uint8_t sta_id; uint8_t modify_mask; uint16_t reserved3; uint32_t station_flags; uint32_t station_flags_msk; uint8_t add_immediate_ba_tid; uint8_t remove_immediate_ba_tid; uint16_t add_immediate_ba_ssn; uint16_t sleep_tx_count; uint8_t sleep_state_flags; uint8_t station_type; uint16_t assoc_id; uint16_t beamform_flags; uint32_t tfd_queue_msk; uint16_t rx_ba_window; uint8_t sp_length; uint8_t uapsd_acs; } __packed; /* ADD_STA_CMD_API_S_VER_10 */ /** * FW station types * ( REPLY_ADD_STA = 0x18 ) * @IWM_STA_LINK: Link station - normal RX and TX traffic. * @IWM_STA_GENERAL_PURPOSE: General purpose. In AP mode used for beacons * and probe responses. * @IWM_STA_MULTICAST: multicast traffic, * @IWM_STA_TDLS_LINK: TDLS link station * @IWM_STA_AUX_ACTIVITY: auxilary station (scan, ROC and so on). */ #define IWM_STA_LINK 0 #define IWM_STA_GENERAL_PURPOSE 1 #define IWM_STA_MULTICAST 2 #define IWM_STA_TDLS_LINK 3 #define IWM_STA_AUX_ACTIVITY 4 /** * struct iwm_add_sta_key_common - add/modify sta key common part * ( REPLY_ADD_STA_KEY = 0x17 ) * @sta_id: index of station in uCode's station table * @key_offset: key offset in key storage * @key_flags: IWM_STA_KEY_FLG_* * @key: key material data * @rx_secur_seq_cnt: RX security sequence counter for the key */ struct iwm_add_sta_key_common { uint8_t sta_id; uint8_t key_offset; uint16_t key_flags; uint8_t key[32]; uint8_t rx_secur_seq_cnt[16]; } __packed; /** * struct iwm_add_sta_key_cmd_v1 - add/modify sta key * @common: see &struct iwm_add_sta_key_common * @tkip_rx_tsc_byte2: TSC[2] for key mix ph1 detection * @reserved: reserved * @tkip_rx_ttak: 10-byte unicast TKIP TTAK for Rx */ struct iwm_add_sta_key_cmd_v1 { struct iwm_add_sta_key_common common; uint8_t tkip_rx_tsc_byte2; uint8_t reserved; uint16_t tkip_rx_ttak[5]; } __packed; /* ADD_MODIFY_STA_KEY_API_S_VER_1 */ /** * struct iwm_add_sta_key_cmd - add/modify sta key * @common: see &struct iwm_add_sta_key_common * @rx_mic_key: TKIP RX unicast or multicast key * @tx_mic_key: TKIP TX key * @transmit_seq_cnt: TSC, transmit packet number */ struct iwm_add_sta_key_cmd { struct iwm_add_sta_key_common common; uint64_t rx_mic_key; uint64_t tx_mic_key; uint64_t transmit_seq_cnt; } __packed; /* ADD_MODIFY_STA_KEY_API_S_VER_2 */ /** * status in the response to ADD_STA command * @IWM_ADD_STA_SUCCESS: operation was executed successfully * @IWM_ADD_STA_STATIONS_OVERLOAD: no room left in the fw's station table * @IWM_ADD_STA_IMMEDIATE_BA_FAILURE: can't add Rx block ack session * @IWM_ADD_STA_MODIFY_NON_EXISTING_STA: driver requested to modify a station * that doesn't exist. */ #define IWM_ADD_STA_SUCCESS 0x1 #define IWM_ADD_STA_STATIONS_OVERLOAD 0x2 #define IWM_ADD_STA_IMMEDIATE_BA_FAILURE 0x4 #define IWM_ADD_STA_MODIFY_NON_EXISTING_STA 0x8 /** * struct iwm_rm_sta_cmd - Add / modify a station in the fw's station table * ( IWM_REMOVE_STA = 0x19 ) * @sta_id: the station id of the station to be removed */ struct iwm_rm_sta_cmd { uint8_t sta_id; uint8_t reserved[3]; } __packed; /* IWM_REMOVE_STA_CMD_API_S_VER_2 */ /** * struct iwm_mgmt_mcast_key_cmd * ( IWM_MGMT_MCAST_KEY = 0x1f ) * @ctrl_flags: %iwm_sta_key_flag * @IGTK: * @K1: IGTK master key * @K2: IGTK sub key * @sta_id: station ID that support IGTK * @key_id: * @receive_seq_cnt: initial RSC/PN needed for replay check */ struct iwm_mgmt_mcast_key_cmd { uint32_t ctrl_flags; uint8_t IGTK[16]; uint8_t K1[16]; uint8_t K2[16]; uint32_t key_id; uint32_t sta_id; uint64_t receive_seq_cnt; } __packed; /* SEC_MGMT_MULTICAST_KEY_CMD_API_S_VER_1 */ struct iwm_wep_key { uint8_t key_index; uint8_t key_offset; uint16_t reserved1; uint8_t key_size; uint8_t reserved2[3]; uint8_t key[16]; } __packed; struct iwm_wep_key_cmd { uint32_t mac_id_n_color; uint8_t num_keys; uint8_t decryption_type; uint8_t flags; uint8_t reserved; struct iwm_wep_key wep_key[0]; } __packed; /* SEC_CURR_WEP_KEY_CMD_API_S_VER_2 */ /* * BT coex */ #define IWM_BT_COEX_DISABLE 0x0 #define IWM_BT_COEX_NW 0x1 #define IWM_BT_COEX_BT 0x2 #define IWM_BT_COEX_WIFI 0x3 /* BT_COEX_MODES_E */ #define IWM_BT_COEX_MPLUT_ENABLED (1 << 0) #define IWM_BT_COEX_MPLUT_BOOST_ENABLED (1 << 1) #define IWM_BT_COEX_SYNC2SCO_ENABLED (1 << 2) #define IWM_BT_COEX_CORUN_ENABLED (1 << 3) #define IWM_BT_COEX_HIGH_BAND_RET (1 << 4) /* BT_COEX_MODULES_ENABLE_E_VER_1 */ /** * struct iwm_bt_coex_cmd - bt coex configuration command * @mode: enum %iwm_bt_coex_mode * @enabled_modules: enum %iwm_bt_coex_enabled_modules * * The structure is used for the BT_COEX command. */ struct iwm_bt_coex_cmd { uint32_t mode; uint32_t enabled_modules; } __packed; /* BT_COEX_CMD_API_S_VER_6 */ /* * Location Aware Regulatory (LAR) API - MCC updates */ /** * struct iwm_mcc_update_cmd_v1 - Request the device to update geographic * regulatory profile according to the given MCC (Mobile Country Code). * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain. * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the * MCC in the cmd response will be the relevant MCC in the NVM. * @mcc: given mobile country code * @source_id: the source from where we got the MCC, see iwm_mcc_source * @reserved: reserved for alignment */ struct iwm_mcc_update_cmd_v1 { uint16_t mcc; uint8_t source_id; uint8_t reserved; } __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_1 */ /** * struct iwm_mcc_update_cmd - Request the device to update geographic * regulatory profile according to the given MCC (Mobile Country Code). * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain. * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the * MCC in the cmd response will be the relevant MCC in the NVM. * @mcc: given mobile country code * @source_id: the source from where we got the MCC, see iwm_mcc_source * @reserved: reserved for alignment * @key: integrity key for MCC API OEM testing * @reserved2: reserved */ struct iwm_mcc_update_cmd { uint16_t mcc; uint8_t source_id; uint8_t reserved; uint32_t key; uint32_t reserved2[5]; } __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_2 */ /** * iwm_mcc_update_resp_v1 - response to MCC_UPDATE_CMD. * Contains the new channel control profile map, if changed, and the new MCC * (mobile country code). * The new MCC may be different than what was requested in MCC_UPDATE_CMD. * @status: see &enum iwm_mcc_update_status * @mcc: the new applied MCC * @cap: capabilities for all channels which matches the MCC * @source_id: the MCC source, see iwm_mcc_source * @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51 * channels, depending on platform) * @channels: channel control data map, DWORD for each channel. Only the first * 16bits are used. */ struct iwm_mcc_update_resp_v1 { uint32_t status; uint16_t mcc; uint8_t cap; uint8_t source_id; uint32_t n_channels; uint32_t channels[0]; } __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_1 */ /** * iwm_mcc_update_resp_v2 - response to MCC_UPDATE_CMD. * Contains the new channel control profile map, if changed, and the new MCC * (mobile country code). * The new MCC may be different than what was requested in MCC_UPDATE_CMD. * @status: see &enum iwm_mcc_update_status * @mcc: the new applied MCC * @cap: capabilities for all channels which matches the MCC * @source_id: the MCC source, see iwm_mcc_source * @time: time elapsed from the MCC test start (in 30 seconds TU) * @reserved: reserved. * @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51 * channels, depending on platform) * @channels: channel control data map, DWORD for each channel. Only the first * 16bits are used. */ struct iwm_mcc_update_resp_v2 { uint32_t status; uint16_t mcc; uint8_t cap; uint8_t source_id; uint16_t time; uint16_t reserved; uint32_t n_channels; uint32_t channels[0]; } __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_2 */ #define IWM_GEO_NO_INFO 0 #define IWM_GEO_WMM_ETSI_5GHZ_INFO (1 << 0) /** * iwm_mcc_update_resp_v3 - response to MCC_UPDATE_CMD. * Contains the new channel control profile map, if changed, and the new MCC * (mobile country code). * The new MCC may be different than what was requested in MCC_UPDATE_CMD. * @status: see &enum iwm_mcc_update_status * @mcc: the new applied MCC * @cap: capabilities for all channels which matches the MCC * @source_id: the MCC source, see IWM_MCC_SOURCE_* * @time: time elapsed from the MCC test start (in 30 seconds TU) * @geo_info: geographic specific profile information * @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51 * channels, depending on platform) * @channels: channel control data map, DWORD for each channel. Only the first * 16bits are used. */ struct iwm_mcc_update_resp_v3 { uint32_t status; uint16_t mcc; uint8_t cap; uint8_t source_id; uint16_t time; uint16_t geo_info; uint32_t n_channels; uint32_t channels[0]; } __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_3 */ /** * struct iwm_mcc_chub_notif - chub notifies of mcc change * (MCC_CHUB_UPDATE_CMD = 0xc9) * The Chub (Communication Hub, CommsHUB) is a HW component that connects to * the cellular and connectivity cores that gets updates of the mcc, and * notifies the ucode directly of any mcc change. * The ucode requests the driver to request the device to update geographic * regulatory profile according to the given MCC (Mobile Country Code). * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain. * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the * MCC in the cmd response will be the relevant MCC in the NVM. * @mcc: given mobile country code * @source_id: identity of the change originator, see iwm_mcc_source * @reserved1: reserved for alignment */ struct iwm_mcc_chub_notif { uint16_t mcc; uint8_t source_id; uint8_t reserved1; } __packed; /* LAR_MCC_NOTIFY_S */ #define IWM_MCC_RESP_NEW_CHAN_PROFILE 0 #define IWM_MCC_RESP_SAME_CHAN_PROFILE 1 #define IWM_MCC_RESP_INVALID 2 #define IWM_MCC_RESP_NVM_DISABLED 3 #define IWM_MCC_RESP_ILLEGAL 4 #define IWM_MCC_RESP_LOW_PRIORITY 5 #define IWM_MCC_RESP_TEST_MODE_ACTIVE 6 #define IWM_MCC_RESP_TEST_MODE_NOT_ACTIVE 7 #define IWM_MCC_RESP_TEST_MODE_DENIAL_OF_SERVICE 8 #define IWM_MCC_SOURCE_OLD_FW 0 #define IWM_MCC_SOURCE_ME 1 #define IWM_MCC_SOURCE_BIOS 2 #define IWM_MCC_SOURCE_3G_LTE_HOST 3 #define IWM_MCC_SOURCE_3G_LTE_DEVICE 4 #define IWM_MCC_SOURCE_WIFI 5 #define IWM_MCC_SOURCE_RESERVED 6 #define IWM_MCC_SOURCE_DEFAULT 7 #define IWM_MCC_SOURCE_UNINITIALIZED 8 #define IWM_MCC_SOURCE_MCC_API 9 #define IWM_MCC_SOURCE_GET_CURRENT 0x10 #define IWM_MCC_SOURCE_GETTING_MCC_TEST_MODE 0x11 /** * struct iwm_dts_measurement_notif_v1 - measurements notification * * @temp: the measured temperature * @voltage: the measured voltage */ struct iwm_dts_measurement_notif_v1 { int32_t temp; int32_t voltage; } __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_1*/ /** * struct iwm_dts_measurement_notif_v2 - measurements notification * * @temp: the measured temperature * @voltage: the measured voltage * @threshold_idx: the trip index that was crossed */ struct iwm_dts_measurement_notif_v2 { int32_t temp; int32_t voltage; int32_t threshold_idx; } __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_2 */ /* * Some cherry-picked definitions */ #define IWM_FRAME_LIMIT 64 /* * From Linux commit ab02165ccec4c78162501acedeef1a768acdb811: * As the firmware is slowly running out of command IDs and grouping of * commands is desirable anyway, the firmware is extending the command * header from 4 bytes to 8 bytes to introduce a group (in place of the * former flags field, since that's always 0 on commands and thus can * be easily used to distinguish between the two). * * These functions retrieve specific information from the id field in * the iwm_host_cmd struct which contains the command id, the group id, * and the version of the command. */ static inline uint8_t iwm_cmd_opcode(uint32_t cmdid) { return cmdid & 0xff; } static inline uint8_t iwm_cmd_groupid(uint32_t cmdid) { return ((cmdid & 0xff00) >> 8); } static inline uint8_t iwm_cmd_version(uint32_t cmdid) { return ((cmdid & 0xff0000) >> 16); } static inline uint32_t iwm_cmd_id(uint8_t opcode, uint8_t groupid, uint8_t version) { return opcode + (groupid << 8) + (version << 16); } /* make uint16_t wide id out of uint8_t group and opcode */ #define IWM_WIDE_ID(grp, opcode) ((grp << 8) | opcode) /* due to the conversion, this group is special */ #define IWM_ALWAYS_LONG_GROUP 1 struct iwm_cmd_header { uint8_t code; uint8_t flags; uint8_t idx; uint8_t qid; } __packed; struct iwm_cmd_header_wide { uint8_t opcode; uint8_t group_id; uint8_t idx; uint8_t qid; uint16_t length; uint8_t reserved; uint8_t version; } __packed; #define IWM_POWER_SCHEME_CAM 1 #define IWM_POWER_SCHEME_BPS 2 #define IWM_POWER_SCHEME_LP 3 #define IWM_DEF_CMD_PAYLOAD_SIZE 320 #define IWM_MAX_CMD_PAYLOAD_SIZE ((4096 - 4) - sizeof(struct iwm_cmd_header)) #define IWM_CMD_FAILED_MSK 0x40 /** * struct iwm_device_cmd * * For allocation of the command and tx queues, this establishes the overall * size of the largest command we send to uCode, except for commands that * aren't fully copied and use other TFD space. */ struct iwm_device_cmd { union { struct { struct iwm_cmd_header hdr; uint8_t data[IWM_DEF_CMD_PAYLOAD_SIZE]; }; struct { struct iwm_cmd_header_wide hdr_wide; uint8_t data_wide[IWM_DEF_CMD_PAYLOAD_SIZE - sizeof(struct iwm_cmd_header_wide) + sizeof(struct iwm_cmd_header)]; }; }; } __packed; struct iwm_rx_packet { /* * The first 4 bytes of the RX frame header contain both the RX frame * size and some flags. * Bit fields: * 31: flag flush RB request * 30: flag ignore TC (terminal counter) request * 29: flag fast IRQ request * 28-26: Reserved * 25: Offload enabled * 24: RPF enabled * 23: RSS enabled * 22: Checksum enabled * 21-16: RX queue * 15-14: Reserved * 13-00: RX frame size */ uint32_t len_n_flags; struct iwm_cmd_header hdr; uint8_t data[]; } __packed; #define IWM_FH_RSCSR_FRAME_SIZE_MSK 0x00003fff #define IWM_FH_RSCSR_FRAME_INVALID 0x55550000 #define IWM_FH_RSCSR_FRAME_ALIGN 0x40 #define IWM_FH_RSCSR_RPA_EN (1 << 25) #define IWM_FH_RSCSR_RADA_EN (1 << 26) #define IWM_FH_RSCSR_RXQ_POS 16 #define IWM_FH_RSCSR_RXQ_MASK 0x3F0000 static inline uint32_t iwm_rx_packet_len(const struct iwm_rx_packet *pkt) { return le32toh(pkt->len_n_flags) & IWM_FH_RSCSR_FRAME_SIZE_MSK; } static inline uint32_t iwm_rx_packet_payload_len(const struct iwm_rx_packet *pkt) { return iwm_rx_packet_len(pkt) - sizeof(pkt->hdr); } #define IWM_MIN_DBM -100 #define IWM_MAX_DBM -33 /* realistic guess */ #define IWM_READ(sc, reg) \ bus_space_read_4((sc)->sc_st, (sc)->sc_sh, (reg)) #define IWM_WRITE(sc, reg, val) \ bus_space_write_4((sc)->sc_st, (sc)->sc_sh, (reg), (val)) #define IWM_WRITE_1(sc, reg, val) \ bus_space_write_1((sc)->sc_st, (sc)->sc_sh, (reg), (val)) #define IWM_SETBITS(sc, reg, mask) \ IWM_WRITE(sc, reg, IWM_READ(sc, reg) | (mask)) #define IWM_CLRBITS(sc, reg, mask) \ IWM_WRITE(sc, reg, IWM_READ(sc, reg) & ~(mask)) #define IWM_BARRIER_WRITE(sc) \ bus_space_barrier((sc)->sc_st, (sc)->sc_sh, 0, (sc)->sc_sz, \ BUS_SPACE_BARRIER_WRITE) #define IWM_BARRIER_READ_WRITE(sc) \ bus_space_barrier((sc)->sc_st, (sc)->sc_sh, 0, (sc)->sc_sz, \ BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE) #endif /* __IF_IWM_REG_H__ */