/* * Copyright (c) 1990 The Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that: (1) source code distributions * retain the above copyright notice and this paragraph in its entirety, (2) * distributions including binary code include the above copyright notice and * this paragraph in its entirety in the documentation or other materials * provided with the distribution, and (3) all advertising materials mentioning * features or use of this software display the following acknowledgement: * ``This product includes software developed by the University of California, * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of * the University nor the names of its contributors may be used to endorse * or promote products derived from this software without specific prior * written permission. * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. */ #ifndef lint static char rcsid[] = "@(#)$Header: print-fddi.c,v 1.4 92/02/03 16:04:02 van Exp $ (LBL)"; #endif #ifdef FDDI #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "interface.h" #include "addrtoname.h" /* * NOTE: This is a very preliminary hack for FDDI support. * There are all sorts of wired in constants & nothing (yet) * to print SMT packets as anything other than hex dumps. * Most of the necessary changes are waiting on my redoing * the "header" that a kernel fddi driver supplies to bpf: I * want it to look like one byte of 'direction' (0 or 1 * depending on whether the packet was inbound or outbound), * two bytes of system/driver dependent data (anything an * implementor thinks would be useful to filter on and/or * save per-packet, then the real 21-byte FDDI header. * Steve McCanne & I have also talked about adding the * 'direction' byte to all bpf headers (e.g., in the two * bytes of padding on an ethernet header). It's not clear * we could do this in a backwards compatible way & we hate * the idea of an incompatible bpf change. Discussions are * proceeding. * * Also, to really support FDDI (and better support 802.2 * over ethernet) we really need to re-think the rather simple * minded assumptions about fixed length & fixed format link * level headers made in gencode.c. One day... * * - vj */ /* XXX This goes somewhere else. */ #define FDDI_HDRLEN 21 static u_char fddi_bit_swap[] = { 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0, 0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0, 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8, 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8, 0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4, 0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4, 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec, 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc, 0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2, 0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2, 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea, 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa, 0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6, 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6, 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee, 0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe, 0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1, 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1, 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9, 0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9, 0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5, 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5, 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed, 0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd, 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3, 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3, 0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb, 0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb, 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7, 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7, 0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef, 0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff, }; static inline void fddi_print(p, length) u_char *p; int length; { u_char fsrc[6], fdst[6]; register char *srcname, *dstname; register int i; /* * bit-swap the fddi addresses (isn't the IEEE standards * process wonderful!) then convert them to names. */ for (i = 0; i < sizeof(fdst); ++i) fdst[i] = fddi_bit_swap[p[i+1]]; for (i = 0; i < sizeof(fsrc); ++i) fsrc[i] = fddi_bit_swap[p[i+7]]; dstname = etheraddr_string(fdst); srcname = etheraddr_string(fsrc); if (vflag) printf("%s %s %02x %02x %02x %02x %02x%02x%02x %s %d: ", dstname, srcname, p[0], p[13], p[14], p[15], p[16], p[17], p[18], etherproto_string((p[19] << 8) | p[20]), length); else if (qflag) printf("%s %s %d: ", dstname, srcname, length); else printf("%s %s %02x %s %d: ", dstname, srcname, p[0], etherproto_string((p[19] << 8) | p[20]), length); } void fddi_if_print(p, tvp, length, caplen) u_char *p; struct timeval *tvp; int length; int caplen; { struct ip *ip; u_short type; ts_print(tvp); if (caplen < FDDI_HDRLEN) { printf("[|fddi]"); goto out; } /* * Some printers want to get back at the link level addresses, * and/or check that they're not walking off the end of the packet. * Rather than pass them all the way down, we set these globals. */ packetp = (u_char *)p; snapend = (u_char *)p + caplen; /* * If the frame is not an LLC frame or is not an LLC/UI frame * or doesn't have SNAP as a dest NSAP, use the default printer. * (XXX - should interpret SMT packets here.) */ if ((p[0] & 0xf8) != 0x50) /* not LLC frame -- use default printer */ type = 0; else if ((p[15] &~ 0x10) != 0x03) /* not UI frame -- use default printer */ type = 0; else if (p[13] != 170) /* DSAP not SNAP -- use default printer */ type = 0; else type = (p[19] << 8) | p[20]; if (eflag) fddi_print(p, length); length -= FDDI_HDRLEN; p += FDDI_HDRLEN; switch (ntohs(type)) { case ETHERTYPE_IP: ip_print((struct ip *)p, length); break; case ETHERTYPE_ARP: case ETHERTYPE_REVARP: arp_print((struct ether_arp *)p, length, caplen - FDDI_HDRLEN); break; default: if (!eflag) fddi_print(p, length); if (!xflag && !qflag) default_print((u_short *)p, caplen - FDDI_HDRLEN); break; } if (xflag) default_print((u_short *)p, caplen - sizeof(FDDI_HDRLEN)); out: putchar('\n'); } #else #include void fddi_if_print() { void error(); error("not configured for fddi"); /* NOTREACHED */ } #endif