path: root/contrib/ncurses/doc/hackguide.doc

                          A Hacker's Guide to NCURSES
                                       
                                   Contents
                                       
     * Abstract
     * Objective of the Package
          + Why System V Curses?
          + How to Design Extensions
     * Portability and Configuration
     * Documentation Conventions
     * How to Report Bugs
     * A Tour of the Ncurses Library
          + Library Overview
          + The Engine Room
          + Keyboard Input
          + Mouse Events
          + Output and Screen Updating
     * The Forms and Menu Libraries
     * A Tour of the Terminfo Compiler
          + Translation of Non-use Capabilities
          + Use Capability Resolution
          + Source-Form Translation
     * Other Utilities
     * Style Tips for Developers
     * Porting Hints
       
                                   Abstract
                                       
   This document is a hacker's tour of the ncurses library and utilities.
   It discusses design philosophy, implementation methods, and the
   conventions used for coding and documentation. It is recommended
   reading for anyone who is interested in porting, extending or
   improving the package.
   
                           Objective of the Package
                                       
   The objective of the ncurses package is to provide a free software API
   for character-cell terminals and terminal emulators with the following
   characteristics:
     * Source-compatible with historical curses implementations
       (including the original BSD curses and System V curses.
     * Conformant with the XSI Curses standard issued as part of XPG4 by
       X/Open.
     * High-quality -- stable and reliable code, wide portability, good
       packaging, superior documentation.
     * Featureful -- should eliminate as much of the drudgery of C
       interface programming as possible, freeing programmers to think at
       a higher level of design.
       
   These objectives are in priority order. So, for example, source
   compatibility with older version must trump featurefulness -- we
   cannot add features if it means breaking the portion of the API
   corresponding to historical curses versions.
   
Why System V Curses?

   We used System V curses as a model, reverse-engineering their API, in
   order to fulfill the first two objectives.
   
   System V curses implementations can support BSD curses programs with
   just a recompilation, so by capturing the System V API we also capture
   BSD's.
   
   More importantly for the future, the XSI Curses standard issued by
   X/Open is explicitly and closely modeled on System V. So conformance
   with System V took us most of the way to base-level XSI conformance.
   
How to Design Extensions

   The third objective (standards conformance) requires that it be easy
   to condition source code using ncurses so that the absence of
   nonstandard extensions does not break the code.
   
   Accordingly, we have a policy of associating with each nonstandard
   extension a feature macro, so that ncurses client code can use this
   macro to condition in or out the code that requires the ncurses
   extension.
   
   For example, there is a macro NCURSES_MOUSE_VERSION which XSI Curses
   does not define, but which is defined in the ncurses library header.
   You can use this to condition the calls to the mouse API calls.
   
                         Portability and Configuration
                                       
   Code written for ncurses may assume an ANSI-standard C compiler and
   POSIX-compatible OS interface. It may also assume the presence of a
   System-V-compatible select(2) call.
   
   We encourage (but do not require) developers to make the code friendly
   to less-capable UNIX environments wherever possible.
   
   We encourage developers to support OS-specific optimizations and
   methods not available under POSIX/ANSI, provided only that:
     * All such code is properly conditioned so the build process does
       not attempt to compile it under a plain ANSI/POSIX environment.
     * Adding such implementation methods does not introduce
       incompatibilities in the ncurses API between platforms.
       
   We use GNU autoconf(1) as a tool to deal with portability issues. The
   right way to leverage an OS-specific feature is to modify the autoconf
   specification files (configure.in and aclocal.m4) to set up a new
   feature macro, which you then use to condition your code.
   
                           Documentation Conventions
                                       
   There are three kinds of documentation associated with this package.
   Each has a different preferred format:
     * Package-internal files (README, INSTALL, TO-DO etc.)
     * Manual pages.
     * Everything else (i.e., narrative documentation).
       
   Our conventions are simple:
    1. Maintain package-internal files in plain text. The expected viewer
       for them more(1) or an editor window; there's no point in
       elaborate mark-up.
    2. Mark up manual pages in the man macros. These have to be viewable
       through traditional man(1) programs.
    3. Write everything else in HTML.
       
   When in doubt, HTMLize a master and use lynx(1) to generate plain
   ASCII (as we do for the announcement document).
   
   The reason for choosing HTML is that it's (a) well-adapted for on-line
   browsing through viewers that are everywhere; (b) more easily readable
   as plain text than most other mark-ups, if you don't have a viewer;
   and (c) carries enough information that you can generate a
   nice-looking printed version from it. Also, of course, it make
   exporting things like the announcement document to WWW pretty trivial.
   
                              How to Report Bugs
                                       
   The reporting address for bugs is bug-ncurses@gnu.org. This is a
   majordomo list; to join, write to bug-ncurses-request@gnu.org with a
   message containing the line:
             subscribe <name>@<host.domain>

   The ncurses code is maintained by a small group of volunteers. While
   we try our best to fix bugs promptly, we simply don't have a lot of
   hours to spend on elementary hand-holding. We rely on intelligent
   cooperation from our users. If you think you have found a bug in
   ncurses, there are some steps you can take before contacting us that
   will help get the bug fixed quickly.
   
   In order to use our bug-fixing time efficiently, we put people who
   show us they've taken these steps at the head of our queue. This means
   that if you don't, you'll probably end up at the tail end and have to
   wait a while.
    1. Develop a recipe to reproduce the bug.
       Bugs we can reproduce are likely to be fixed very quickly, often
       within days. The most effective single thing you can do to get a
       quick fix is develop a way we can duplicate the bad behavior --
       ideally, by giving us source for a small, portable test program
       that breaks the library. (Even better is a keystroke recipe using
       one of the test programs provided with the distribution.)
    2. Try to reproduce the bug on a different terminal type.
       In our experience, most of the behaviors people report as library
       bugs are actually due to subtle problems in terminal descriptions.
       This is especially likely to be true if you're using a traditional
       asynchronous terminal or PC-based terminal emulator, rather than
       xterm or a UNIX console entry.
       It's therefore extremely helpful if you can tell us whether or not
       your problem reproduces on other terminal types. Usually you'll
       have both a console type and xterm available; please tell us
       whether or not your bug reproduces on both.
       If you have xterm available, it is also good to collect xterm
       reports for different window sizes. This is especially true if you
       normally use an unusual xterm window size -- a surprising number
       of the bugs we've seen are either triggered or masked by these.
    3. Generate and examine a trace file for the broken behavior.
       Recompile your program with the debugging versions of the
       libraries. Insert a trace() call with the argument set to
       TRACE_UPDATE. (See "Writing Programs with NCURSES" for details on
       trace levels.) Reproduce your bug, then look at the trace file to
       see what the library was actually doing.
       Another frequent cause of apparent bugs is application coding
       errors that cause the wrong things to be put on the virtual
       screen. Looking at the virtual-screen dumps in the trace file will
       tell you immediately if this is happening, and save you from the
       possible embarrassment of being told that the bug is in your code
       and is your problem rather than ours.
       If the virtual-screen dumps look correct but the bug persists,
       it's possible to crank up the trace level to give more and more
       information about the library's update actions and the control
       sequences it issues to perform them. The test directory of the
       distribution contains a tool for digesting these logs to make them
       less tedious to wade through.
       Often you'll find terminfo problems at this stage by noticing that
       the escape sequences put out for various capabilities are wrong.
       If not, you're likely to learn enough to be able to characterize
       any bug in the screen-update logic quite exactly.
    4. Report details and symptoms, not just interpretations.
       If you do the preceding two steps, it is very likely that you'll
       discover the nature of the problem yourself and be able to send us
       a fix. This will create happy feelings all around and earn you
       good karma for the first time you run into a bug you really can't
       characterize and fix yourself.
       If you're still stuck, at least you'll know what to tell us.
       Remember, we need details. If you guess about what is safe to
       leave out, you are too likely to be wrong.
       If your bug produces a bad update, include a trace file. Try to
       make the trace at the least voluminous level that pins down the
       bug. Logs that have been through tracemunch are OK, it doesn't
       throw away any information (actually they're better than
       un-munched ones because they're easier to read).
       If your bug produces a core-dump, please include a symbolic stack
       trace generated by gdb(1) or your local equivalent.
       Tell us about every terminal on which you've reproduced the bug --
       and every terminal on which you can't. Ideally, sent us terminfo
       sources for all of these (yours might differ from ours).
       Include your ncurses version and your OS/machine type, of course!
       You can find your ncurses version in the curses.h file.
       
   If your problem smells like a logic error or in cursor movement or
   scrolling or a bad capability, there are a couple of tiny test frames
   for the library algorithms in the progs directory that may help you
   isolate it. These are not part of the normal build, but do have their
   own make productions.
   
   The most important of these is mvcur, a test frame for the
   cursor-movement optimization code. With this program, you can see
   directly what control sequences will be emitted for any given cursor
   movement or scroll/insert/delete operations. If you think you've got a
   bad capability identified, you can disable it and test again. The
   program is command-driven and has on-line help.
   
   If you think the vertical-scroll optimization is broken, or just want
   to understand how it works better, build hashmap and read the header
   comments of hardscroll.c and hashmap.c; then try it out. You can also
   test the hardware-scrolling optimization separately with hardscroll.
   
   There's one other interactive tester, tctest, that exercises
   translation between termcap and terminfo formats. If you have a
   serious need to run this, you probably belong on our development team!
   
                         A Tour of the Ncurses Library
                                       
Library Overview

   Most of the library is superstructure -- fairly trivial convenience
   interfaces to a small set of basic functions and data structures used
   to manipulate the virtual screen (in particular, none of this code
   does any I/O except through calls to more fundamental modules
   described below). The files
   
     lib_addch.c lib_bkgd.c lib_box.c lib_chgat.c lib_clear.c
     lib_clearok.c lib_clrbot.c lib_clreol.c lib_colorset.c lib_data.c
     lib_delch.c lib_delwin.c lib_echo.c lib_erase.c lib_gen.c
     lib_getstr.c lib_hline.c lib_immedok.c lib_inchstr.c lib_insch.c
     lib_insdel.c lib_insstr.c lib_instr.c lib_isendwin.c lib_keyname.c
     lib_leaveok.c lib_move.c lib_mvwin.c lib_overlay.c lib_pad.c
     lib_printw.c lib_redrawln.c lib_scanw.c lib_screen.c lib_scroll.c
     lib_scrollok.c lib_scrreg.c lib_set_term.c lib_slk.c
     lib_slkatr_set.c lib_slkatrof.c lib_slkatron.c lib_slkatrset.c
     lib_slkattr.c lib_slkclear.c lib_slkcolor.c lib_slkinit.c
     lib_slklab.c lib_slkrefr.c lib_slkset.c lib_slktouch.c lib_touch.c
     lib_unctrl.c lib_vline.c lib_wattroff.c lib_wattron.c lib_window.c
     
   are all in this category. They are very unlikely to need change,
   barring bugs or some fundamental reorganization in the underlying data
   structures.
   
   These files are used only for debugging support:
   
     lib_trace.c lib_traceatr.c lib_tracebits.c lib_tracechr.c
     lib_tracedmp.c lib_tracemse.c trace_buf.c
     
   It is rather unlikely you will ever need to change these, unless you
   want to introduce a new debug trace level for some reasoon.
   
   There is another group of files that do direct I/O via tputs(),
   computations on the terminal capabilities, or queries to the OS
   environment, but nevertheless have only fairly low complexity. These
   include:
   
     lib_acs.c lib_beep.c lib_color.c lib_endwin.c lib_initscr.c
     lib_longname.c lib_newterm.c lib_options.c lib_termcap.c lib_ti.c
     lib_tparm.c lib_tputs.c lib_vidattr.c read_entry.c.
     
   They are likely to need revision only if ncurses is being ported to an
   environment without an underlying terminfo capability representation.
   
   These files have serious hooks into the tty driver and signal
   facilities:
   
     lib_kernel.c lib_baudrate.c lib_raw.c lib_tstp.c lib_twait.c
     
   If you run into porting snafus moving the package to another UNIX, the
   problem is likely to be in one of these files. The file lib_print.c
   uses sleep(2) and also falls in this category.
   
   Almost all of the real work is done in the files
   
     hardscroll.c hashmap.c lib_addch.c lib_doupdate.c lib_getch.c
     lib_mouse.c lib_mvcur.c lib_refresh.c lib_setup.c lib_vidattr.c
     
   Most of the algorithmic complexity in the library lives in these
   files. If there is a real bug in ncurses itself, it's probably here.
   We'll tour some of these files in detail below (see The Engine Room).
   
   Finally, there is a group of files that is actually most of the
   terminfo compiler. The reason this code lives in the ncurses library
   is to support fallback to /etc/termcap. These files include
   
     alloc_entry.c captoinfo.c comp_captab.c comp_error.c comp_hash.c
     comp_parse.c comp_scan.c parse_entry.c read_termcap.c write_entry.c
     
   We'll discuss these in the compiler tour.
   
The Engine Room

  Keyboard Input
  
   All ncurses input funnels through the function wgetch(), defined in
   lib_getch.c. This function is tricky; it has to poll for keyboard and
   mouse events and do a running match of incoming input against the set
   of defined special keys.
   
   The central data structure in this module is a FIFO queue, used to
   match multiple-character input sequences against special-key
   capabilities; also to implement pushback via ungetch().
   
   The wgetch() code distinguishes between function key sequences and the
   same sequences typed manually by doing a timed wait after each input
   character that could lead a function key sequence. If the entire
   sequence takes less than 1 second, it is assumed to have been
   generated by a function key press.
   
   Hackers bruised by previous encounters with variant select(2) calls
   may find the code in lib_twait.c interesting. It deals with the
   problem that some BSD selects don't return a reliable time-left value.
   The function timed_wait() effectively simulates a System V select.
   
  Mouse Events
  
   If the mouse interface is active, wgetch() polls for mouse events each
   call, before it goes to the keyboard for input. It is up to
   lib_mouse.c how the polling is accomplished; it may vary for different
   devices.
   
   Under xterm, however, mouse event notifications come in via the
   keyboard input stream. They are recognized by having the kmous
   capability as a prefix. This is kind of klugey, but trying to wire in
   recognition of a mouse key prefix without going through the
   function-key machinery would be just too painful, and this turns out
   to imply having the prefix somewhere in the function-key capabilities
   at terminal-type initialization.
   
   This kluge only works because kmous isn't actually used by any
   historic terminal type or curses implementation we know of. Best guess
   is it's a relic of some forgotten experiment in-house at Bell Labs
   that didn't leave any traces in the publicly-distributed System V
   terminfo files. If System V or XPG4 ever gets serious about using it
   again, this kluge may have to change.
   
   Here are some more details about mouse event handling:
   
   The lib_mouse()code is logically split into a lower level that accepts
   event reports in a device-dependent format and an upper level that
   parses mouse gestures and filters events. The mediating data structure
   is a circular queue of event structures.
   
   Functionally, the lower level's job is to pick up primitive events and
   put them on the circular queue. This can happen in one of two ways:
   either (a) _nc_mouse_event() detects a series of incoming mouse
   reports and queues them, or (b) code in lib_getch.c detects the kmous
   prefix in the keyboard input stream and calls _nc_mouse_inline to
   queue up a series of adjacent mouse reports.
   
   In either case, _nc_mouse_parse() should be called after the series is
   accepted to parse the digested mouse reports (low-level events) into a
   gesture (a high-level or composite event).
   
  Output and Screen Updating
  
   With the single exception of character echoes during a wgetnstr() call
   (which simulates cooked-mode line editing in an ncurses window), the
   library normally does all its output at refresh time.
   
   The main job is to go from the current state of the screen (as
   represented in the curscr window structure) to the desired new state
   (as represented in the newscr window structure), while doing as little
   I/O as possible.
   
   The brains of this operation are the modules hashmap.c, hardscroll.c
   and lib_doupdate.c; the latter two use lib_mvcur.c. Essentially, what
   happens looks like this:
   
   The hashmap.c module tries to detect vertical motion changes between
   the real and virtual screens. This information is represented by the
   oldindex members in the newscr structure. These are modified by
   vertical-motion and clear operations, and both are re-initialized
   after each update. To this change-journalling information, the hashmap
   code adds deductions made using a modified Heckel algorithm on hash
   values generated from the line contents.
   
   The hardscroll.c module computes an optimum set of scroll, insertion,
   and deletion operations to make the indices match. It calls
   _nc_mvcur_scrolln() in lib_mvcur.c to do those motions.
   
   Then lib_doupdate.c goes to work. Its job is to do line-by-line
   transformations of curscr lines to newscr lines. Its main tool is the
   routine mvcur() in lib_mvcur.c. This routine does cursor-movement
   optimization, attempting to get from given screen location A to given
   location B in the fewest output characters posible.
   
   If you want to work on screen optimizations, you should use the fact
   that (in the trace-enabled version of the library) enabling the
   TRACE_TIMES trace level causes a report to be emitted after each
   screen update giving the elapsed time and a count of characters
   emitted during the update. You can use this to tell when an update
   optimization improves efficiency.
   
   In the trace-enabled version of the library, it is also possible to
   disable and re-enable various optimizations at runtime by tweaking the
   variable _nc_optimize_enable. See the file include/curses.h.in for
   mask values, near the end.
   
                         The Forms and Menu Libraries
                                       
   The forms and menu libraries should work reliably in any environment
   you can port ncurses to. The only portability issue anywhere in them
   is what flavor of regular expressions the built-in form field type
   TYPE_REGEXP will recognize.
   
   The configuration code prefers the POSIX regex facility, modeled on
   System V's, but will settle for BSD regexps if the former isn't
   available.
   
   Historical note: the panels code was written primarily to assist in
   porting u386mon 2.0 (comp.sources.misc v14i001-4) to systems lacking
   panels support; u386mon 2.10 and beyond use it. This version has been
   slightly cleaned up for ncurses.
   
                        A Tour of the Terminfo Compiler
                                       
   The ncurses implementation of tic is rather complex internally; it has
   to do a trying combination of missions. This starts with the fact
   that, in addition to its normal duty of compiling terminfo sources
   into loadable terminfo binaries, it has to be able to handle termcap
   syntax and compile that too into terminfo entries.
   
   The implementation therefore starts with a table-driven, dual-mode
   lexical analyzer (in comp_scan.c). The lexer chooses its mode (termcap
   or terminfo) based on the first `,' or `:' it finds in each entry. The
   lexer does all the work of recognizing capability names and values;
   the grammar above it is trivial, just "parse entries till you run out
   of file".
   
Translation of Non-use Capabilities

   Translation of most things besides use capabilities is pretty
   straightforward. The lexical analyzer's tokenizer hands each
   capability name to a hash function, which drives a table lookup. The
   table entry yields an index which is used to look up the token type in
   another table, and controls interpretation of the value.
   
   One possibly interesting aspect of the implementation is the way the
   compiler tables are initialized. All the tables are generated by
   various awk/sed/sh scripts from a master table include/Caps; these
   scripts actually write C initializers which are linked to the
   compiler. Furthermore, the hash table is generated in the same way, so
   it doesn't have to be generated at compiler startup time (another
   benefit of this organization is that the hash table can be in
   shareable text space).
   
   Thus, adding a new capability is usually pretty trivial, just a matter
   of adding one line to the include/Caps file. We'll have more to say
   about this in the section on Source-Form Translation.
   
Use Capability Resolution

   The background problem that makes tic tricky isn't the capability
   translation itself, it's the resolution of use capabilities. Older
   versions would not handle forward use references for this reason (that
   is, a using terminal always had to follow its use target in the source
   file). By doing this, they got away with a simple implementation
   tactic; compile everything as it blows by, then resolve uses from
   compiled entries.
   
   This won't do for ncurses. The problem is that that the whole
   compilation process has to be embeddable in the ncurses library so
   that it can be called by the startup code to translate termcap entries
   on the fly. The embedded version can't go promiscuously writing
   everything it translates out to disk -- for one thing, it will
   typically be running with non-root permissions.
   
   So our tic is designed to parse an entire terminfo file into a
   doubly-linked circular list of entry structures in-core, and then do
   use resolution in-memory before writing everything out. This design
   has other advantages: it makes forward and back use-references equally
   easy (so we get the latter for free), and it makes checking for name
   collisions before they're written out easy to do.
   
   And this is exactly how the embedded version works. But the
   stand-alone user-accessible version of tic partly reverts to the
   historical strategy; it writes to disk (not keeping in core) any entry
   with no use references.
   
   This is strictly a core-economy kluge, implemented because the
   terminfo master file is large enough that some core-poor systems swap
   like crazy when you compile it all in memory...there have been reports
   of this process taking three hours, rather than the twenty seconds or
   less typical on the author's development box.
   
   So. The executable tic passes the entry-parser a hook that immediately
   writes out the referenced entry if it has no use capabilities. The
   compiler main loop refrains from adding the entry to the in-core list
   when this hook fires. If some other entry later needs to reference an
   entry that got written immediately, that's OK; the resolution code
   will fetch it off disk when it can't find it in core.
   
   Name collisions will still be detected, just not as cleanly. The
   write_entry() code complains before overwriting an entry that
   postdates the time of tic's first call to write_entry(), Thus it will
   complain about overwriting entries newly made during the tic run, but
   not about overwriting ones that predate it.
   
Source-Form Translation

   Another use of tic is to do source translation between various termcap
   and terminfo formats. There are more variants out there than you might
   think; the ones we know about are described in the captoinfo(1) manual
   page.
   
   The translation output code (dump_entry() in ncurses/dump_entry.c) is
   shared with the infocmp(1) utility. It takes the same internal
   representation used to generate the binary form and dumps it to
   standard output in a specified format.
   
   The include/Caps file has a header comment describing ways you can
   specify source translations for nonstandard capabilities just by
   altering the master table. It's possible to set up capability aliasing
   or tell the compiler to plain ignore a given capability without
   writing any C code at all.
   
   For circumstances where you need to do algorithmic translation, there
   are functions in parse_entry.c called after the parse of each entry
   that are specifically intended to encapsulate such translations. This,
   for example, is where the AIX box1 capability get translated to an
   acsc string.
   
                                Other Utilities
                                       
   The infocmp utility is just a wrapper around the same entry-dumping
   code used by tic for source translation. Perhaps the one interesting
   aspect of the code is the use of a predicate function passed in to
   dump_entry() to control which capabilities are dumped. This is
   necessary in order to handle both the ordinary De-compilation case and
   entry difference reporting.
   
   The tput and clear utilities just do an entry load followed by a
   tputs() of a selected capability.
   
                           Style Tips for Developers
                                       
   See the TO-DO file in the top-level directory of the source
   distribution for additions that would be particularly useful.
   
   The prefix _nc_ should be used on library public functions that are
   not part of the curses API in order to prevent pollution of the
   application namespace. If you have to add to or modify the function
   prototypes in curses.h.in, read ncurses/MKlib_gen.sh first so you can
   avoid breaking XSI conformance. Please join the ncurses mailing list.
   See the INSTALL file in the top level of the distribution for details
   on the list.
   
   Look for the string FIXME in source files to tag minor bugs and
   potential problems that could use fixing.
   
   Don't try to auto-detect OS features in the main body of the C code.
   That's the job of the configuration system.
   
   To hold down complexity, do make your code data-driven. Especially, if
   you can drive logic from a table filtered out of include/Caps, do it.
   If you find you need to augment the data in that file in order to
   generate the proper table, that's still preferable to ad-hoc code --
   that's why the fifth field (flags) is there.
   
   Have fun!
   
                                 Porting Hints
                                       
   The following notes are intended to be a first step towards DOS and
   Macintosh ports of the ncurses libraries.
   
   The following library modules are `pure curses'; they operate only on
   the curses internal structures, do all output through other curses
   calls (not including tputs() and putp()) and do not call any other
   UNIX routines such as signal(2) or the stdio library. Thus, they
   should not need to be modified for single-terminal ports.
   
     lib_addch.c lib_addstr.c lib_bkgd.c lib_box.c lib_clear.c
     lib_clrbot.c lib_clreol.c lib_delch.c lib_delwin.c lib_erase.c
     lib_inchstr.c lib_insch.c lib_insdel.c lib_insstr.c lib_keyname.c
     lib_move.c lib_mvwin.c lib_newwin.c lib_overlay.c lib_pad.c
     lib_printw.c lib_refresh.c lib_scanw.c lib_scroll.c lib_scrreg.c
     lib_set_term.c lib_touch.c lib_tparm.c lib_tputs.c lib_unctrl.c
     lib_window.c panel.c
     
   This module is pure curses, but calls outstr():
   
     lib_getstr.c
     
   These modules are pure curses, except that they use tputs() and
   putp():
   
     lib_beep.c lib_color.c lib_endwin.c lib_options.c lib_slk.c
     lib_vidattr.c
     
   This modules assist in POSIX emulation on non-POSIX systems:
   
   sigaction.c
          signal calls
          
   The following source files will not be needed for a
   single-terminal-type port.
   
     alloc_entry.c captoinfo.c clear.c comp_captab.c comp_error.c
     comp_hash.c comp_main.c comp_parse.c comp_scan.c dump_entry.c
     infocmp.c parse_entry.c read_entry.c tput.c write_entry.c
     
   The following modules will use open()/read()/write()/close()/lseek()
   on files, but no other OS calls.
   
   lib_screen.c
          used to read/write screen dumps
          
   lib_trace.c
          used to write trace data to the logfile
          
   Modules that would have to be modified for a port start here:
   
   The following modules are `pure curses' but contain assumptions
   inappropriate for a memory-mapped port.
   
   lib_longname.c
          assumes there may be multiple terminals
          
   lib_acs.c
          assumes acs_map as a double indirection
          
   lib_mvcur.c
          assumes cursor moves have variable cost
          
   lib_termcap.c
          assumes there may be multiple terminals
          
   lib_ti.c
          assumes there may be multiple terminals
          
   The following modules use UNIX-specific calls:
   
   lib_doupdate.c
          input checking
          
   lib_getch.c
          read()
          
   lib_initscr.c
          getenv()
          
   lib_newterm.c
   lib_baudrate.c
   lib_kernel.c
          various tty-manipulation and system calls
          
   lib_raw.c
          various tty-manipulation calls
          
   lib_setup.c
          various tty-manipulation calls
          
   lib_restart.c
          various tty-manipulation calls
          
   lib_tstp.c
          signal-manipulation calls
          
   lib_twait.c
          gettimeofday(), select().
     _________________________________________________________________
   
   
    Eric S. Raymond <esr@snark.thyrsus.com>
    
   (Note: This is not the bug address!)