path: root/release/doc/en_US.ISO8859-1/relnotes/article.xml

<?xml version="1.0" encoding="iso-8859-1"?>
<!DOCTYPE article PUBLIC "-//FreeBSD//DTD DocBook XML V5.0-Based Extension//EN"
	"../../../share/xml/freebsd50.dtd" [
<!ENTITY % release PUBLIC "-//FreeBSD//ENTITIES Release Specification//EN" "release.ent">
 %release;
<!ENTITY % sponsor PUBLIC "-//FreeBSD//ENTITIES Sponsor Specification//EN" "sponsor.ent">
 %sponsor;
<!ENTITY % vendor PUBLIC "-//FreeBSD//ENTITIES Vendor Specification//EN" "vendor.ent">
 %vendor;
]>
<article xmlns="http://docbook.org/ns/docbook" xmlns:xlink="http://www.w3.org/1999/xlink" version="5.0">
  <info><title>&os; &release.current; Release Notes</title>

  <author><orgname>The &os; Project</orgname></author>

  <pubdate>$FreeBSD$</pubdate>

  <copyright>
    <year>2014</year>
    <holder role="mailto:doc@FreeBSD.org">The &os; Documentation
      Project</holder>
  </copyright>

  <legalnotice xml:id="trademarks" role="trademarks">
    &tm-attrib.freebsd;
    &tm-attrib.ibm;
    &tm-attrib.ieee;
    &tm-attrib.intel;
    &tm-attrib.sparc;
    &tm-attrib.general;
  </legalnotice>

  <abstract>
    <para>The release notes for &os; &release.current; contain
      a summary of the changes made to the &os; base system on the
      &release.branch; development line.  This document lists
      applicable security advisories that were issued since the last
      release, as well as significant changes to the &os; kernel and
      userland.  Some brief remarks on upgrading are also
      presented.</para>
  </abstract>
</info>

<sect1 xml:id="intro">
  <title>Introduction</title>

  <para>This document contains the release notes for &os;
    &release.current;.  It describes recently added, changed, or
    deleted features of &os;.  It also provides some notes on
    upgrading from previous versions of &os;.</para>

  <para releasetype="current">The &release.type; distribution to which
    these release notes apply represents the latest point along the
    &release.branch; development branch since &release.branch; was
    created.  Information regarding pre-built, binary &release.type;
    distributions along this branch can be found at <uri
      xlink:href="&release.url;">&release.url;</uri>.</para>

  <para releasetype="snapshot">The &release.type; distribution to
    which these release notes apply represents a point along the
    &release.branch; development branch between &release.prev; and the
    future &release.next;.  Information regarding pre-built, binary
    &release.type; distributions along this branch can be found at
    <uri xlink:href="&release.url;">&release.url;</uri>.</para>

  <para releasetype="release">This distribution of &os;
    &release.current; is a &release.type; distribution.  It can be
    found at <uri xlink:href="&release.url;">&release.url;</uri> or
    any of its mirrors.  More information on obtaining this (or other)
    &release.type; distributions of &os; can be found in the <link
      xlink:href="&url.books.handbook;/mirrors.html"><quote>Obtaining
	&os;</quote> appendix</link> to the <link
      xlink:href="&url.books.handbook;/">&os; Handbook</link>.</para>

  <para>All users are encouraged to consult the release errata before
    installing &os;.  The errata document is updated with
    <quote>late-breaking</quote> information discovered late in the
    release cycle or after the release.  Typically, it contains
    information on known bugs, security advisories, and corrections to
    documentation.  An up-to-date copy of the errata for &os;
    &release.current; can be found on the &os; Web site.</para>
</sect1>

<sect1 xml:id="new">
  <title>What's New</title>

  <para>This section describes the most user-visible new or changed
    features in &os; since &release.prev;.  In general, changes
    described here are unique to the &release.branch; branch unless
    specifically marked as &merged; features.</para>

  <para>Typical release note items document recent security advisories
    issued after &release.prev;, new drivers or hardware support, new
    commands or options, major bug fixes, or contributed software
    upgrades.  They may also list changes to major ports/packages or
    release engineering practices.  Clearly the release notes cannot
    list every single change made to &os; between releases; this
    document focuses primarily on security advisories, user-visible
    changes, and major architectural improvements.</para>

  <sect2 xml:id="security">
    <title>Security Advisories</title>

    <para>No advisories.</para>

  </sect2>

  <sect2 xml:id="kernel">
    <title>Kernel Changes</title>

    <para revision="260888">The <filename>VT</filename> kernel
      configuration file has been added, which enables the new
      <literal>vt</literal> console driver.</para>

    <para revision="260903">Support for GPS ports has been added to
      &man.uhso.4;.</para>

    <para revision="264601" contrib="sponsor"
      sponsor="&darpa_afrl;">The <literal>if_nf10bmac(4)</literal>
      device has been added, providing support for NetFPGA-10G
      Embedded CPU Ethernet Core.</para>

    <note>
      <para>The <literal>if_nf10bmac(4)</literal> driver operates on
	the FPGA, and is not suited for the PCI host interface.</para>
    </note>

    <para revision="265132">The &man.full.4; device has been added,
      and the <literal>lindev(4)</literal> device has been removed.
      Prior to this change, <literal>lindev(4)</literal> provided only
      the <filename>/dev/full</filename> character device, returning
      <literal>ENOSPC</literal> on write attempts.  As this device is
      not specific to &linux;, a native &os; version has been
      added.</para>

    <para revision="265236" contrib="sponsor"
      sponsor="&lsi;, &spectralogic;" sponsorurl="">The &man.mpr.4;
      device has been added, providing support for LSI Fusion-MPT
      3 12Gb SCSI/SATA controllers.</para>

    <para revision="265555" contrib="sponsor"
      sponsor="&lsi;">The &man.mrsas.4; driver has been added,
      providing support for LSI MegaRAID SAS controllers.  The
      &man.mfi.4; driver will attach to the controller, by default.
      To enable &man.mrsas.4; add
      <literal>hw.mfi.mrsas_enable=1</literal> to
      <filename>/boot/loader.conf</filename>, which turns off
      &man.mfi.4; device probing.</para>

    <note>
      <para>At this time, the &man.mfiutil.8; utility and
	the &os; version of
	<application>MegaCLI</application> and
	<application>StorCli</application> do not work with
	&man.mrsas.4;.</para>
    </note>

    <para revision="265876">A kernel bug that inhibited proper
      functionality of the <literal>dev.cpu.0.freq</literal>
      &man.sysctl.8; on &intel; processors with Turbo
      Boost&nbsp;&trade; enabled has been fixed.</para>

    <sect3 xml:id="kernel-virtualization">
      <title>Virtualization support</title>

      <para revision="260410">Support for the <quote>Virtual Interrupt
	  Delivery</quote> feature of &intel;&nbsp;VT-x is enabled if
	supported by the CPU.  This feature can be disabled by running
	<literal>sysctl hw.vmm.vmx.use_apic_vid=0</literal>.
	Additionally, to persist this setting across reboots, add
	<literal>hw.vmm.vmx.use_apic_vid=0</literal> to
	<filename>/etc/sysctl.conf</filename>.</para>

      <para revision="260532">Support for <quote>Posted Interrupt
	  Processing</quote> is enabled if supported by the CPU.  This
	feature can be disabled by running <literal>sysctl
	  hw.vmm.vmx.use_apic_pir=0</literal>.  Additionally, to
	persist this setting across reboots, add
	<literal>hw.vmm.vmx.use_apic_pir=0</literal> to
	<filename>/etc/sysctl.conf</filename>.</para>

      <para revision="260582">Unmapped IO support has been added to
	&man.virtio_blk.4;.</para>

      <para revision="260583">Unmapped IO support has been added to
	&man.virtio_scsi.4;.</para>

      <para revision="260847">The &man.virtio_random.4; driver has
	been added to harvest entropy from the host system.</para>
    </sect3>

    <sect3 xml:id="kernel-arm">
      <title>ARM support</title>

      <para revision="260921">The &man.nand.4; device is enabled for
	ARM devices by default.</para>
    </sect3>

    <sect3 xml:id="boot">
      <title>Boot Loader Changes</title>

      <para>&nbsp;</para>
    </sect3>

    <sect3 xml:id="proc">
      <title>Hardware Support</title>

      <sect4 xml:id="mm">
	<title>Multimedia Support</title>

	<para>&nbsp;</para>
      </sect4>

      <sect4 xml:id="net-if">
	<title>Network Interface Support</title>

	<para revision="258830">Support for Broadcom chipsets
	  BCM57764, BCM57767, BCM57782, BCM57786 and BCM57787 has
	  been added to &man.bge.4;.</para>

	<para revision="260448">Support for the &intel;
	  Centrino&trade; Wireless-N 135 chipset has been
	  added.</para>

	<para revision="260552">Firmware for &intel;
	  Centrino&trade; Wireless-N 105 devices has been added
	  to the base system.</para>

	<para revision="261975">The deprecated nve(4) driver has been
	  removed.  Users of NVIDIA nForce MCP network adapters are
	  advised to use the &man.nfe.4; driver instead, which has been
	  the default driver for this hardware since &os; 7.0.</para>

	<para revision="265348" contrib="sponsor"
	  sponsor="&netgate;">The &man.ath.hal.4; driver has been
	  updated to support the Atheros AR1111 chipset.</para>
      </sect4>
    </sect3>

    <sect3 xml:id="net-proto">
      <title>Network Protocols</title>

      <para revision="263140">Support for the IPX network transport
	protocol has been removed, and will not be supported in
	&os;&nbsp;11 and later releases.</para>
    </sect3>

    <sect3 xml:id="disks">
      <title>Disks and Storage</title>

      <para>&nbsp;</para>
    </sect3>

    <sect3 xml:id="fs">
      <title>File Systems</title>

      <para>&nbsp;</para>

      <sect4 xml:id="fs-zfs">
	<title>ZFS</title>

	<para>&nbsp;</para>
      </sect4>
    </sect3>
  </sect2>

  <sect2 xml:id="userland">
    <title>Userland Changes</title>

    <para revision="258838" contrib="sponsor" sponsor="&ff;, &google;"
      sponsorurl="">The &man.casperd.8; daemon has been added,
      which provides access to functionality that is not available in
      the <quote>capability mode</quote> sandbox.</para>

    <para revision="260594">When unable to load a kernel module with
      &man.kldload.8;, a message informing to view output of
      &man.dmesg.8; is now printed, opposed to the previous output
      <quote>Exec format error.</quote>.</para>

    <para revision="260910">Allow &man.pciconf.8; to identify PCI
      devices that are attached to a driver to be identified by their
      device name instead of just the selector.  Additionally, an
      optional device argument to the <literal>-l</literal> flag
      to restrict the output to only listing details about a single
      device.</para>

    <para revision="260913">A new flag, <quote>onifconsole</quote> has
      been added to <filename>/etc/ttys</filename>.  This allows the
      system to provide a login prompt via serial console if the
      device is an active kernel console, otherwise it is equivalent
      to <literal>off</literal>.</para>

    <para revision="260926">Support for displaying VPD for PCI devices
      via &man.pciconf.8; has been added.</para>

    <para revision="261498">&man.ping.8; protects against malicious
      network packets using the Capsicum framework to drop
      privileges.</para>

    <para revision="261504">&os;/&arch.i386; guests can be run under
      bhyve.</para>

    <para revision="265229">The &man.ps.1; utility has been
      updated to include the <literal>-J</literal> flag, used to
      filter output by matching &man.jail.8; IDs and names.
      Additionally, argument <literal>0</literal> can be used to
      <literal>-J</literal> to only list processes running on the
      host system.</para>

    <para revision="265249">The &man.top.1; utility has been updated
      to filter by &man.jail.8; ID or name, in followup to the
      &man.ps.1; change in <literal>r265229</literal>.</para>

    <para revision="265995">The Blowfish &man.crypt.3; default format
      has been changed to
      <literal>&dollar;2b&dollar;</literal>.</para>

    <para revision="266209">The &man.pmcstat.8; utility has been
      updated to include a new flag, <literal>-l</literal>, which
      adds event collection after the specified number of
      seconds.</para>

    <para revision="266463">The default &man.newsyslog.conf.5; now
      includes files in the
      <filename>/etc/newsyslog.conf.d/</filename> and
      <filename>/usr/local/etc/newsyslog.conf.d/</filename>
      directories by default for &man.newsyslog.8;.</para>

    <sect3 xml:id="rc-scripts">
      <title><filename>/etc/rc.d</filename> Scripts</title>

      <para>&nbsp;</para>
    </sect3>
  </sect2>

  <sect2 xml:id="contrib">
    <title>Contributed Software</title>

    <para revision="258884" contrib="sponsor"
      sponsor="&darpa_afrl;">&man.lldb.1; has been updated to upstream
      snapshot version r196259.</para>

    <para revision="259626">Timezone data files have been updated to
      version 2013i.</para>

    <para revision="260445">&man.byacc.1; has been updated to version
      20140101.</para>

    <para revision="261037"><application>OpenSSL</application> has
      been updated to version 1.0.1.f.</para>

    <para revision="261071">&man.jemalloc.3; has been updated to
      version 3.5.0.</para>

    <para revision="266527" role="merged"><application>Sendmail</application>
      has been updated from 8.14.7 to 8.14.9.</para>

    <para revision="261212"><application>bmake</application> has been
      updated to version 20140101.</para>

    <para revision="261283"><application>libc++</application> has been
      updated to version 3.4.</para>

    <para revision="261320"><application>OpenSSH</application> has
      been updated to 6.5p1.</para>

    <para revision="261344"><application>mdocml</application> has been
      updated to version 1.12.3.</para>

    <para revision="261991"><application>LLVM</application> and
      <application>Clang</application> have been updated to
      version 3.4.</para>
  </sect2>

  <sect2 xml:id="ports">
    <title>Ports/Packages Collection Infrastructure</title>

    <para>&nbsp;</para>
  </sect2>

  <sect2 xml:id="releng">
    <title>Release Engineering and Integration</title>

    <para>&nbsp;</para>
  </sect2>

  <sect2 xml:id="doc">
    <title>Documentation</title>

    <para>&nbsp;</para>
  </sect2>
</sect1>

<sect1 xml:id="upgrade">
  <title>Upgrading from previous releases of &os;</title>

  <para arch="amd64,i386">Binary upgrades between RELEASE versions
    (and snapshots of the various security branches) are supported
    using the &man.freebsd-update.8; utility.  The binary upgrade
    procedure will update unmodified userland utilities, as well as
    unmodified GENERIC kernels distributed as a part of an official
    &os; release.  The &man.freebsd-update.8; utility requires that
    the host being upgraded have Internet connectivity.</para>

  <para>Source-based upgrades (those based on recompiling the &os;
    base system from source code) from previous versions are
    supported, according to the instructions in
    <filename>/usr/src/UPDATING</filename>.</para>

  <important>
    <para>Upgrading &os; should only be attempted after backing up
      <emphasis>all</emphasis> data and configuration files.</para>
  </important>
</sect1>
</article>