blob: 18f50eac70b2ee0e93f5f591a20e200726d11364 (
plain) (
tree)
|
|
PORTNAME= openvpn
DISTVERSION= 2.6.7
PORTREVISION?= 1
CATEGORIES= security net net-vpn
MASTER_SITES= https://swupdate.openvpn.org/community/releases/ \
https://build.openvpn.net/downloads/releases/ \
LOCAL/mandree
MAINTAINER= mandree@FreeBSD.org
COMMENT?= Secure IP/Ethernet tunnel daemon
WWW= https://openvpn.net/community/
LICENSE= GPLv2
LICENSE_FILE= ${WRKSRC}/COPYRIGHT.GPL
BUILD_DEPENDS+= cmocka>=0:sysutils/cmocka \
rst2man:textproc/py-docutils@${PY_FLAVOR}
USES= cpe libtool localbase:ldflags pkgconfig python:build shebangfix ssl
USE_RC_SUBR= openvpn
SHEBANG_FILES= sample/sample-scripts/auth-pam.pl \
sample/sample-scripts/totpauth.py \
sample/sample-scripts/ucn.pl \
sample/sample-scripts/verify-cn
GNU_CONFIGURE= yes
CONFIGURE_ARGS+= --enable-strict --with-crypto-library=openssl
# set PLUGIN_LIBDIR so that unqualified plugin paths are found:
CONFIGURE_ENV+= PLUGINDIR="${PREFIX}/lib/openvpn/plugins"
CONFLICTS_INSTALL?= openvpn-2* openvpn-devel openvpn-mbedtls
SUB_FILES= pkg-message openvpn-client
USERS= openvpn
GROUPS= openvpn
PORTDOCS= *
PORTEXAMPLES= *
OPTIONS_DEFINE= ASYNC_PUSH DCO DOCS EASYRSA EXAMPLES LZ4 LZO PKCS11 SMALL \
TEST UNITTESTS X509ALTUSERNAME
OPTIONS_DEFAULT= DCO EASYRSA LZ4 LZO PKCS11 TEST
OPTIONS_EXCLUDE_FreeBSD_12= DCO # FreeBSD 14 only
OPTIONS_EXCLUDE_FreeBSD_13= DCO # FreeBSD 14 only
ASYNC_PUSH_DESC= Enable async-push support
DCO_DESC= Build with Data Channel Offload (ovpn(4)) support
EASYRSA_DESC= Install security/easy-rsa RSA helper package
LZO_DESC= LZO compression (incompatible with LibreSSL)
PKCS11_DESC= Use security/pkcs11-helper, needs same SSL lib!
SMALL_DESC= Build a smaller executable with fewer features
UNITTESTS_DESC= Enable unit tests
X509ALTUSERNAME_DESC= Enable --x509-username-field
ASYNC_PUSH_LIB_DEPENDS= libinotify.so:devel/libinotify
ASYNC_PUSH_CONFIGURE_ENABLE= async-push
DCO_CONFIGURE_ENABLE= dco
EASYRSA_RUN_DEPENDS= easy-rsa>=0:security/easy-rsa
LZ4_LIB_DEPENDS+= liblz4.so:archivers/liblz4
LZ4_CONFIGURE_ENABLE= lz4
LZO_LIB_DEPENDS+= liblzo2.so:archivers/lzo2
LZO_CONFIGURE_ENABLE= lzo
PKCS11_LIB_DEPENDS= libpkcs11-helper.so:security/pkcs11-helper
PKCS11_CONFIGURE_ENABLE= pkcs11
SMALL_CONFIGURE_ENABLE= small
TEST_ALL_TARGET= check
TEST_TEST_TARGET_OFF= check
UNITTESTS_BUILD_DEPENDS= cmocka>=0:sysutils/cmocka
UNITTESTS_CONFIGURE_ENABLE= unit-tests
X509ALTUSERNAME_CONFIGURE_ENABLE= x509-alt-username
.ifdef (LOG_OPENVPN)
CFLAGS+= -DLOG_OPENVPN=${LOG_OPENVPN}
.endif
.include <bsd.port.options.mk>
.if ${PORT_OPTIONS:MLZO}
IGNORE_SSL=libressl libressl-devel
IGNORE_SSL_REASON=OpenVPN does not have permission to include LZO with LibreSSL. Compile against OpenSSL, or if your setups support it, disable LZO support
.endif
.if ! ${PORT_OPTIONS:MLZ4} && ! ${PORT_OPTIONS:MLZO}
CONFIGURE_ARGS+= --enable-comp-stub
.endif
.include <bsd.port.pre.mk>
.if !empty(PORT_OPTIONS:MLZO) && !empty(SSL_DEFAULT:Nbase:Nopenssl*)
# in-depth security net if Mk/Uses/ssl.mk changes
pre-everything::
@${ECHO_CMD} >&2 "ERROR: OpenVPN is not licensed to combine LZO with other OpenSSL-licensed libraries than OpenSSL. Compile against OpenSSL, or if your setups support it, disable LZO support."
@${SHELL} -c 'exit 1'
.endif
post-patch:
${REINPLACE_CMD} -E -i '' -e 's/(user|group) nobody/\1 openvpn/' \
-e 's/"nobody"( after init)/"openvpn" \1/' \
${WRKSRC}/sample/sample-config-files/*.conf \
${WRKSRC}/doc/man-sections/generic-options.rst
pre-configure:
# just too many of sign-compare; bitwise-instead-of-logical was audited and is intentional,
# and unused-function affects test---these are developer-side warnings, not relevant on end systems
${REINPLACE_CMD} 's/-Wsign-compare/-Wno-unknown-warning-option -Wno-sign-compare -Wno-bitwise-instead-of-logical -Wno-unused-function/' ${WRKSRC}/configure
.ifdef (LOG_OPENVPN)
@${ECHO} "Building with LOG_OPENVPN=${LOG_OPENVPN}"
.else
@${ECHO} ""
@${ECHO} "You may use the following build options:"
@${ECHO} ""
@${ECHO} " LOG_OPENVPN={Valid syslog facility, default LOG_DAEMON}"
@${ECHO} " EXAMPLE: make LOG_OPENVPN=LOG_LOCAL6"
@${ECHO} ""
.endif
.if !empty(SSL_DEFAULT:Mlibressl*)
@${ECHO} "### --------------------------------------------------------- ###"
@${ECHO} "### NOTE that libressl is not primarily supported by OpenVPN ###"
@${ECHO} "### Do not report bugs without fixes/patches unless the issue ###"
@${ECHO} "### can be reproduced with a released OpenSSL version. ###"
@${ECHO} "### --------------------------------------------------------- ###"
@sleep 10
.endif
post-configure:
${REINPLACE_CMD} '/^CFLAGS =/s/$$/ -fPIC/' \
${WRKSRC}/src/plugins/auth-pam/Makefile \
${WRKSRC}/src/plugins/down-root/Makefile
# sanity check that we don't inherit incompatible SSL libs through,
# for instance, pkcs11-helper:
_tlslibs=libssl libcrypto
post-build:
@a=$$(LC_ALL=C ldd -f '%o\n' ${WRKSRC}/src/openvpn/openvpn \
| ${SORT} -u) ; set -- $$(for i in ${_tlslibs} ; do ${PRINTF} '%s\n' "$$a" | ${GREP} $${i}.so | wc -l ; done | ${SORT} -u) ;\
if test "$$*" != "1" ; then ( set -x ; ldd -a ${WRKSRC}/src/openvpn/openvpn ) ; ${PRINTF} '%s\n' "$$a" ; ${ECHO_CMD} >&2 "${.CURDIR} FAILED: either of ${_tlslibs} libraries linked multiple times" ; ${RM} ${BUILD_COOKIE} ; exit 1 ; fi
post-install:
${STRIP_CMD} ${STAGEDIR}${PREFIX}/lib/openvpn/plugins/openvpn-plugin-auth-pam.so
${STRIP_CMD} ${STAGEDIR}${PREFIX}/lib/openvpn/plugins/openvpn-plugin-down-root.so
${INSTALL_SCRIPT} ${WRKSRC}/contrib/pull-resolv-conf/client.up ${STAGEDIR}${PREFIX}/libexec/openvpn-client.up
${INSTALL_SCRIPT} ${WRKSRC}/contrib/pull-resolv-conf/client.down ${STAGEDIR}${PREFIX}/libexec/openvpn-client.down
${INSTALL_SCRIPT} ${WRKDIR}/openvpn-client ${STAGEDIR}${PREFIX}/sbin/openvpn-client
${MKDIR} ${STAGEDIR}${PREFIX}/include
post-install-DOCS-on:
${MKDIR} ${STAGEDIR}${DOCSDIR}/
.for i in AUTHORS ChangeLog PORTS
${INSTALL_MAN} ${WRKSRC}/${i} ${STAGEDIR}${DOCSDIR}/
.endfor
post-install-EXAMPLES-on:
(cd ${WRKSRC}/sample && ${COPYTREE_SHARE} \* ${STAGEDIR}${EXAMPLESDIR}/)
${CHMOD} ${BINMODE} ${STAGEDIR}${EXAMPLESDIR}/sample-scripts/*
${RM} ${STAGEDIR}${EXAMPLESDIR}/sample-config-files/*.orig
.include <bsd.port.post.mk>
|
