# New ports collection makefile for: squid24
# Date created: Tue Mar 27 14:56:08 CEST 2001
# Whom: Adrian Chadd <adrian@FreeBSD.org>
#
# $FreeBSD$
#
# Tunables not (yet) configurable via 'make config':
# SQUID_{U,G}ID
# Which user/group Squid should run as (default: squid/squid).
# The user and group will be created if they do not already exist using
# a uid:gid of 100:100.
# NOTE: before version 2.5.4_6, these settings defaulted to
# nobody/nogroup.
# If you wish to keep these settings, please define SQUID_UID=nobody and
# SQUID_GID=nogroup in your make environment before you start the update.
# NOTE2:
# Before version 2.5.4_11 the numerical id chosen for SQUID_UID (and
# SQUID_GID respectively) was the first free id greater than or equal 3128.
# If you wish to move your squid user to id 100:100, run "make changeuser",
# please see the changeuser target's definition for further information.
# SQUID_LANGUAGES
# A list of languages for which error page files should be installed
# (default: all)
#
# E.g. use `make SQUID_LANGUAGES="English French"' if you want to
# install the files for these languages only.
# Use `make -VSQUID_LANGUAGES' or scroll down to this variable's
# definition to see which values are valid.
#
# SQUID_DEFAULT_LANG
# If you define SQUID_LANGUAGES, select which language should be the default
# one (this variable defaults to English). This setting can be overwritten
# with squid.conf's error_directory directive.
#
# SQUID_CONFIGURE_ARGS
# Additional configuration options.
#
# To enable them, use e.g
# `make SQUID_CONFIGURE_ARGS="--enable-dlmalloc --enable-truncate" install'
#
# The list below may be incomplete, please see the configure script
# in the squid source distribution for the complete list of additional
# options.
# Note that you probably do not need to worry about these options in most
# cases, they are included in case you want to experiment with them.
#
# --enable-dlmalloc
# Compile and use the malloc package from Doug Lea
# --enable-gnuregex
# Compile and use the supplied GNUregex routines instead of BSD regex.
# --enable-xmalloc-statistics
# Show malloc statistics in status page
# --enable-time-hack
# Optimize time updates to one per second rather than calling gettimeofday()
# --enable-cachemgr-hostname=some.hostname
# Set an explicit hostname in cachemgr.cgi
# --enable-truncate
# Use truncate() rather than unlink()
# --disable-unlinkd
# Do not use "unlinkd"
# --with-aufs-threads=N_THREADS
# Tune the number of worker threads for the aufs object
# --with-coss-membuf-size
# COSS membuf size (default: 1048576 bytes)
# --with-maxfd=N
# Override the maximum number of filedescriptors. Useful if you
# build as another user who is not privileged to use the amount
# of filedescriptors the resulting binary is expected to support.
# --enable-ntlm-fail-open
# Enable NTLM fail open, where a helper that fails one of the
# Authentication steps can allow Squid to still authenticate the user
#
PORTNAME= squid
PORTVERSION= 2.5.14
PORTREVISION= 4
CATEGORIES= www
MASTER_SITES= http://www.squid-cache.org/%SUBDIR%/ \
http://www2.us.squid-cache.org/%SUBDIR%/ \
http://www3.us.squid-cache.org/%SUBDIR%/ \
http://www1.at.squid-cache.org/%SUBDIR%/ \
http://www2.nl.squid-cache.org/%SUBDIR%/ \
http://www1.ru.squid-cache.org/%SUBDIR%/ \
http://www1.uk.squid-cache.org/%SUBDIR%/ \
http://www1.gr.squid-cache.org/%SUBDIR%/ \
http://www1.jp.squid-cache.org/%SUBDIR%/ \
http://www1.tw.squid-cache.org/%SUBDIR%/
MASTER_SITE_SUBDIR= Versions/v2/2.5
DISTNAME= squid-2.5.STABLE14
DIST_SUBDIR= squid2.5
PATCH_SITES= ${MASTER_SITES}
PATCH_SITE_SUBDIR= Versions/v2/2.5/bugs
PATCHFILES= squid-2.5.STABLE14-httpReplyDestroy.patch \
squid-2.5.STABLE14-hierarchy_tag.patch
PATCH_DIST_STRIP= -p1
MAINTAINER= tmseck@netcologne.de
COMMENT= HTTP Caching Proxy
LATEST_LINK= squid25
CONFLICTS= squid-2.[^5]*
GNU_CONFIGURE= yes
USE_BZIP2= yes
USE_PERL5= yes
SQUID_UID?= squid
SQUID_GID?= squid
MAN8= cachemgr.cgi.8 squid.8
docs= QUICKSTART README RELEASENOTES.html doc/debug-sections.txt
PORTDOCS= ${docs:T}
SUB_FILES+= pkg-deinstall pkg-install pkg-message
SUB_LIST+= SQUID_UID=${SQUID_UID} SQUID_GID=${SQUID_GID}
OPTIONS= SQUID_LDAP_AUTH "Install LDAP authentication helpers" off \
SQUID_SASL_AUTH "Install SASL authentication helpers" off \
SQUID_DELAY_POOLS "Enable delay pools" off \
SQUID_SNMP "Enable SNMP support" off \
SQUID_CARP "Enable CARP support" off \
SQUID_SSL "Enable SSL support for reverse proxies" off \
SQUID_PINGER "Install the icmp helper" off \
SQUID_DNS_HELPER "Use the old 'dnsserver' helper" off \
SQUID_HTCP "Enable HTCP support" off \
SQUID_VIA_DB "Enable forward/via database" off \
SQUID_CACHE_DIGESTS "Enable cache digests" off \
SQUID_WCCP "Enable Web Cache Coordination Protocol" on \
SQUID_UNDERSCORES "Allow underscores in hostnames" on \
SQUID_CHECK_HOSTNAME "Do hostname checking" on \
SQUID_STRICT_HTTP "Be strictly HTTP compliant" off \
SQUID_IDENT "Enable ident (RFC 931) lookups" on \
SQUID_USERAGENT_LOG "Enable User-Agent-header logging" off \
SQUID_CUSTOM_LOG "Enable custom log format" off \
SQUID_ARP_ACL "Enable ACLs based on ethernet address" off \
SQUID_PF "Enable transparent proxying with PF" off \
SQUID_IPFILTER "Enable transp. proxying with IPFilter" off \
SQUID_FOLLOW_XFF "Follow X-Forwarded-For headers" off \
SQUID_ICAP "Enable ICAP client functionality" off \
SQUID_AUFS "Enable the aufs storage scheme" off \
SQUID_COSS "Enable the COSS storage scheme" off \
SQUID_LARGEFILE "Support log and cache files >2GB" off \
SQUID_STACKTRACES "Create backtraces on fatal errors" off \
SQUID_RCNG "Install an rc.d style startup script" on
etc_files= squid/cachemgr.conf.default \
squid/mib.txt squid/mime.conf.default \
squid/msntauth.conf.default squid/squid.conf.default
icon_files= anthony-binhex.gif anthony-bomb.gif anthony-box.gif \
anthony-box2.gif anthony-c.gif anthony-compressed.gif \
anthony-dir.gif anthony-dirup.gif anthony-dvi.gif \
anthony-f.gif anthony-image.gif anthony-image2.gif \
anthony-layout.gif anthony-link.gif anthony-movie.gif \
anthony-pdf.gif anthony-portal.gif anthony-ps.gif \
anthony-quill.gif anthony-script.gif anthony-sound.gif \
anthony-tar.gif anthony-tex.gif anthony-text.gif \
anthony-unknown.gif anthony-xbm.gif anthony-xpm.gif
error_files= ERR_ACCESS_DENIED ERR_CACHE_ACCESS_DENIED \
ERR_CACHE_MGR_ACCESS_DENIED ERR_CANNOT_FORWARD \
ERR_CONNECT_FAIL ERR_DNS_FAIL ERR_FORWARDING_DENIED \
ERR_FTP_DISABLED ERR_FTP_FAILURE ERR_FTP_FORBIDDEN \
ERR_FTP_NOT_FOUND ERR_FTP_PUT_CREATED \
ERR_FTP_PUT_ERROR ERR_FTP_PUT_MODIFIED ERR_FTP_UNAVAILABLE \
ERR_INVALID_REQ ERR_INVALID_RESP ERR_INVALID_URL \
ERR_LIFETIME_EXP ERR_NO_RELAY ERR_ONLY_IF_CACHED_MISS \
ERR_READ_ERROR ERR_READ_TIMEOUT ERR_SHUTTING_DOWN \
ERR_SOCKET_FAILURE ERR_TOO_BIG ERR_UNSUP_REQ \
ERR_URN_RESOLVE ERR_WRITE_ERROR ERR_ZERO_SIZE_OBJECT
libexec= cachemgr.cgi digest_pw_auth diskd ip_user_check \
msnt_auth ncsa_auth ntlm_auth \
pam_auth smb_auth smb_auth.sh squid_unix_group \
wb_auth wb_group wb_ntlmauth wbinfo_group.pl
.if !defined(SQUID_CONFIGURE_ARGS) || ${SQUID_CONFIGURE_ARGS:M*--disable-unlinkd*} == ""
libexec+= unlinkd
.endif
sbin= RunAccel RunCache squidclient squid
CONFIGURE_ARGS= --bindir=${PREFIX}/sbin --sysconfdir=${PREFIX}/etc/squid \
--datadir=${PREFIX}/etc/squid \
--libexecdir=${PREFIX}/libexec/squid \
--localstatedir=${PREFIX}/squid \
--enable-removal-policies="lru heap"
.include <bsd.port.pre.mk>
# Authentication methods and modules:
basic_auth= NCSA PAM MSNT SMB winbind
external_acl= ip_user unix_group wbinfo_group winbind_group
MAN8+= pam_auth.8 squid_unix_group.8
.if defined(WITH_SQUID_LDAP_AUTH)
USE_OPENLDAP= yes
CFLAGS+= -I${LOCALBASE}/include
LDFLAGS+= -L${LOCALBASE}/lib
MAN8+= squid_ldap_auth.8 squid_ldap_group.8
basic_auth+= LDAP
external_acl+= ldap_group
libexec+= squid_ldap_auth squid_ldap_group
.endif
.if defined(WITH_SQUID_SASL_AUTH)
LIB_DEPENDS+= sasl2.2:${PORTSDIR}/security/cyrus-sasl2
CFLAGS+= -I${LOCALBASE}/include
CPPFLAGS+= -I${LOCALBASE}/include
LDFLAGS+= -L${LOCALBASE}/lib
basic_auth+= SASL
libexec+= sasl_auth
.endif
.if !defined(NO_NIS) && !defined(WITHOUT_NIS)
basic_auth+= YP
libexec+= yp_auth
.endif
CONFIGURE_ARGS+= --enable-auth="basic ntlm digest" \
--enable-basic-auth-helpers="${basic_auth}" \
--enable-digest-auth-helpers="password" \
--enable-external-acl-helpers="${external_acl}" \
--enable-ntlm-auth-helpers="SMB winbind"
# Selection of storage schemes:
storage_schemes= ufs diskd null
.if defined(WITH_SQUID_AUFS)
storage_schemes+= aufs
# Nil aufs threads is default, set any other value via SQUID_CONFIGURE_ARGS
CONFIGURE_ARGS+= --enable-async-io \
--with-pthreads
CFLAGS+= ${PTHREAD_CFLAGS}
.endif
.if defined(WITH_SQUID_COSS)
storage_schemes+= coss
CONFIGURE_ARGS+= --with-aio
.endif
CONFIGURE_ARGS+= --enable-storeio="${storage_schemes}"
# Other options set via 'make config':
.if defined(WITH_SQUID_DELAY_POOLS)
CONFIGURE_ARGS+= --enable-delay-pools
.endif
.if defined(WITH_SQUID_SNMP)
CONFIGURE_ARGS+= --enable-snmp
.endif
.if defined(WITH_SQUID_CARP)
CONFIGURE_ARGS+= --enable-carp
.endif
.if defined(WITH_SQUID_SSL)
# we need to .include bsd.openssl.mk manually here because USE_OPENSSL only
# works when it is defined before bsd.port{.pre}.mk is .included and this is
# not possible when using OPTIONS
.include "${PORTSDIR}/Mk/bsd.openssl.mk"
CONFIGURE_ARGS+= --enable-ssl \
--with-openssl="${OPENSSLBASE}"
CFLAGS+= -I${OPENSSLINC}
LDFLAGS+= -L${OPENSSLLIB}
.endif
.if defined(WITH_SQUID_PINGER)
CONFIGURE_ARGS+= --enable-icmp
libexec+= pinger
.endif
.if defined(WITH_SQUID_DNS_HELPER)
CONFIGURE_ARGS+= --disable-internal-dns
libexec+= dnsserver
.endif
.if defined(WITH_SQUID_HTCP)
CONFIGURE_ARGS+= --enable-htcp
.endif
.if defined(WITH_SQUID_VIA_DB)
CONFIGURE_ARGS+= --enable-forw-via-db
.endif
.if defined(WITH_SQUID_CACHE_DIGESTS)
CONFIGURE_ARGS+= --enable-cache-digests
.endif
.if defined(WITHOUT_SQUID_WCCP)
CONFIGURE_ARGS+= --disable-wccp
.endif
.if !defined(WITHOUT_SQUID_UNDERSCORES)
CONFIGURE_ARGS+= --enable-underscores
.endif
.if defined(WITHOUT_SQUID_CHECK_HOSTNAME)
CONFIGURE_ARGS+= --disable-hostname-checks
.endif
.if defined(WITH_SQUID_STRICT_HTTP)
CONFIGURE_ARGS+= --disable-http-violations
.endif
.if defined(WITHOUT_SQUID_IDENT)
CONFIGURE_ARGS+= --disable-ident-lookups
.endif
.if defined(WITH_SQUID_USERAGENT_LOG)
CONFIGURE_ARGS+= --enable-useragent-log
.endif
.if defined(WITH_SQUID_CUSTOM_LOG)
EXTRA_PATCHES+= ${PATCHDIR}/customlog-2.5.patch
.endif
.if defined(WITH_SQUID_ARP_ACL)
CONFIGURE_ARGS+= --enable-arp-acl
.endif
.if defined(WITH_SQUID_PF)
CONFIGURE_ARGS+= --enable-pf-transparent
.if ${OSVERSION} < 502106
IGNORE= pf available only in FreeBSD 5.3 and newer
.endif
.endif
# IPFilter-headers are not installed on FreeBSD 4 since 4.7-RELEASE,
# they were not installed on FreeBSD 5 from 2002-03-26 (OSVERSION > 500032) to
# 2003-06-27 (OSVERSION < 501101).
#
# Please see PR misc/44148 and the CVS log of src/include/Makefile for further
# information.
.if defined(WITH_SQUID_IPFILTER)
.if (${OSVERSION} >= 470000 && ${OSVERSION} < 500000) || (${OSVERSION} > 500032 && ${OSVERSION} < 501101)
IGNORE= IPFilter headers are not part of the base system
.else
CONFIGURE_ARGS+= --enable-ipf-transparent
.endif
.endif
.if defined(WITH_SQUID_FOLLOW_XFF)
EXTRA_PATCHES+= ${PATCHDIR}/follow_xff-2.5.patch \
${PATCHDIR}/follow_xff-configure.patch
CONFIGURE_ARGS+= --enable-follow-x-forwarded-for
.endif
.if defined(WITH_SQUID_ICAP)
EXTRA_PATCHES+= ${PATCHDIR}/icap-2.5-core.patch \
${PATCHDIR}/icap-2.5-bootstrap.patch
CONFIGURE_ARGS+= --enable-icap-support
error_files+= ERR_ICAP_FAILURE
.endif
.if defined(WITH_SQUID_LARGEFILE)
CONFIGURE_ARGS+= --with-large-files --enable-large-cache-files
.endif
.if defined(WITH_SQUID_STACKTRACES)
CONFIGURE_ARGS+= --enable-stacktraces
CFLAGS+= -g
STRIP= ""
.endif
.if !defined(WITHOUT_SQUID_RCNG)
USE_RC_SUBR= squid.sh
rc_del= rcold
rc_state= rcng
.else
SUB_FILES+= squid.sh
etc_files+= rc.d/squid.sh
rc_del= rcng
rc_state= rcold
.endif
# Languages:
#
# If you do not define SQUID_LANGUAGES yourself, all available language files
# will be installed; the default language will be English.
SQUID_LANGUAGES?= \
Azerbaijani Bulgarian Catalan Czech Danish Dutch English Estonian Finnish \
French German Greek Hebrew Hungarian Italian Japanese Korean Lithuanian \
Polish Portuguese Romanian Russian-1251 Russian-koi8-r Serbian \
Simplify_Chinese Slovak Spanish Swedish Traditional_Chinese Turkish
SQUID_DEFAULT_LANG?= English
CONFIGURE_ARGS+= --enable-err-languages="${SQUID_LANGUAGES}" \
--enable-default-err-language=${SQUID_DEFAULT_LANG}
# Finally, add additional user specified configuration options:
CONFIGURE_ARGS+= ${SQUID_CONFIGURE_ARGS}
CONFIGURE_ENV+= CFLAGS="${CFLAGS}" \
CPPFLAGS="${CPPFLAGS}"\
LDFLAGS="${LDFLAGS}"
PLIST_DIRS= etc/squid/icons libexec/squid
PLIST_FILES= ${etc_files:S,^,etc/,} ${icon_files:S,^,etc/squid/icons/,} \
${libexec:S,^,libexec/squid/,} ${sbin:S,^,sbin/,}
.for d in ${SQUID_LANGUAGES}
PLIST_DIRS+= etc/squid/errors/${d}
PLIST_FILES+= ${error_files:S,^,etc/squid/errors/${d}/,}
.endfor
PLIST_DIRS+= etc/squid/errors etc/squid squid/logs squid/cache squid
post-patch:
@${REINPLACE_CMD} -e 's|-lpthread|${PTHREAD_LIBS}|g' ${WRKSRC}/configure
@${REINPLACE_CMD} -e 's|%%SQUID_UID%%|${SQUID_UID}|g' \
-e 's|%%SQUID_GID%%|${SQUID_GID}|g' ${WRKSRC}/src/cf.data.pre
@${REINPLACE_CMD} -e 's|%%LOCALBASE%%|${LOCALBASE}|g' \
${WRKSRC}/helpers/basic_auth/SMB/Makefile.in \
${WRKSRC}/helpers/basic_auth/SMB/smb_auth.sh
pre-install:
# Prevent installation of .orig files by deleting them.
@${FIND} ${WRKSRC} -name '*.bak' -delete
@${FIND} ${WRKSRC} -name '*.orig' -delete
# create the start script:
@${REINPLACE_CMD} \
-e '/--begin ${rc_del}/,/--end ${rc_del}/d' \
-e '/--.*${rc_state}/d' ${WRKDIR}/squid.sh
# create variable information in pkg-message:
@${REINPLACE_CMD} \
-e '/--begin ${rc_del}/,/--end ${rc_del}/d' \
-e '/--.*${rc_state}/d' ${PKGMESSAGE}
pre-su-install:
@${SETENV} ${SCRIPTS_ENV} PKG_PREFIX=${PREFIX} \
${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL
post-install:
# Create cachemgr.conf.default manually since squid's install routine
# unfortunately fails to do so:
${INSTALL_DATA} ${WRKSRC}/src/cachemgr.conf \
${PREFIX}/etc/squid/cachemgr.conf.default
.if defined(WITH_SQUID_PINGER)
${CHMOD} 4510 ${PREFIX}/libexec/squid/pinger; \
${CHGRP} ${SQUID_GID} ${PREFIX}/libexec/squid/pinger
.endif
.if defined(WITHOUT_SQUID_RCNG)
${INSTALL_SCRIPT} ${WRKDIR}/squid.sh ${PREFIX}/etc/rc.d/
.endif
.if !defined(NOPORTDOCS)
@${MKDIR} ${DOCSDIR}
cd ${WRKSRC} && ${INSTALL_DATA} ${docs} ${DOCSDIR}
.endif
@${SETENV} PKG_PREFIX=${PREFIX} \
${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL
@${ECHO_CMD} "===> post-installation information for ${PKGNAME}:"
@${ECHO_CMD} ""
@${CAT} ${PKGMESSAGE}
@${ECHO_CMD} ""
changeuser:
# Recover from the problem that earlier versions of this port created the
# squid pseudo-user with an id greater than 999 which is not allowed in
# FreeBSD's ports system. The port now uses id 100:100.
# NOTE:
# This target assumes that SQUID_GID is the primary group of SQUID_UID. If you
# have a different setup, do not run this target!
.if ${SQUID_UID:L} == nobody
@${ECHO_CMD} "'nobody' is a system user, you do not need to execute"; \
${ECHO_CMD} "this target!"
${FALSE}
.endif
@if [ `${ID} -u` -ne 0 ]; \
then ${ECHO_CMD} "Sorry, you must be root to use this target."; ${FALSE}; fi; \
current_uid=`id -u ${SQUID_UID}`; \
current_gid=`pw groupshow ${SQUID_GID}|cut -f 3 -d :`; \
${ECHO_CMD} "I will remove this user:"; \
${ID} -P $${current_uid}; \
${ECHO_CMD} "and this group:"; \
pw groupshow ${SQUID_GID}; \
${ECHO_CMD} "I will then re-create them with a user and group id of 100."; \
${ECHO_CMD} "Then all files and directories under ${PREFIX} and /var that"; \
${ECHO_CMD} "are owned by uid $${current_uid} will be chown(1)'ed."; \
${ECHO_CMD} "After that, all files and directories that were accessible"; \
${ECHO_CMD} "by group $${current_gid} will chgrp(1)'ed respectively."; \
${ECHO_CMD} "Note that this assumes group '${SQUID_GID}' to be the primary"; \
${ECHO_CMD} "group of user '${SQUID_UID}'. If you have a different setup"; \
${ECHO_CMD} "please abort this target now."; \
read -p "Press RETURN to continue or CTRL-C to abort:" dummy ; \
${ECHO_CMD} "OK, here we go:"; \
${ECHO_CMD} "deleting user $${current_uid} and his primary group..."; \
pw userdel -u $${current_uid}; \
${ECHO_CMD} "adding user ${SQUID_UID} with id 100..."; \
pw groupadd -n ${SQUID_GID} -g 100; \
pw useradd -n ${SQUID_UID} -u 100 -c "squid caching-proxy pseudo user" \
-d ${PREFIX}/squid -s /sbin/nologin -h - ; \
${ECHO_CMD} "chown(1)'ing everything under ${PREFIX} from $${current_uid} to 100..."; \
${FIND} -H ${PREFIX} -user $${current_uid} -exec ${CHOWN} 100 {} \; ; \
${ECHO_CMD} "chgrp(1)'ing everything under ${PREFIX} from $${current_gid} to 100..."; \
${FIND} -H ${PREFIX} -group $${current_gid} -exec ${CHOWN} :100 {} \; ; \
${ECHO_CMD} "chown(1)'ing everything under /var from $${current_uid} to 100..."; \
${FIND} -H /var -user $${current_uid} -exec ${CHOWN} 100 {} \; ; \
${ECHO_CMD} "chgrp(1)'ing everything under /var from $${current_gid} to 100..."; \
${FIND} -H /var -group $${current_gid} -exec ${CHOWN} :100 {} \; ; \
${ECHO_CMD} "Finished."
.include <bsd.port.post.mk>
