Reviewed by: Earlier draft reviewed by Satoshi (Thanks)

A new import based on Sam Leffler's Hylafax V3.0pl0.   Flexfax is now obsolete.

Import includes & applies the base patch Sam posted on the flexfax mail list
(mail list is still called flexfax, though the package is called Hylafax).

Sam declared our ports/comms/flexfax to be obsolete (over a year old).
Sometime after the CD release, I will post a proposal to remove 
ports/comms/flexfax.

I will maintain ports/comms/hylafax as I need fax capability.

Thanks to Asami Satoshi for suggested improvements,
I leave him to `bless' this port by adding the final
        comms/Makefile: SUBDIR += hylafax
Until he does that, any mistakes I may have made shouldnt break any makes :-)

I've undoubtedly screwed something up, somewhere, its a big port (30M inc bins),please test, Oh... and "Share & Enjoy" :-)
---
Julian Stacey  <jhs@freebsd.org>  Tel. +49 89 268616.   Fax Modem: 2608126 
                http://www.regent.e-technik.tu-muenchen.de/people/jhs.html

7 files changed, 644 insertions, 0 deletions

diff --git a/comms/hylafax/Makefile b/comms/hylafax/Makefile
new file mode 100644
index 000000000000..ee21b428e586
--- /dev/null
+++ b/comms/hylafax/Makefile
@@ -0,0 +1,162 @@
+# ports collection makefile for:	hylafax
+# Version required:	v3.0pl0
+# Date created:		16 May 1995
+# Whom:			Julian Stacey <jhs@freebsd.org>
+# To Replace:		flexfax v2.3beta038special
+# Name changed from flexfax to hylafax by author of both: Sam Leffler.
+
+MAINTAINER=	jhs@FreeBSD.org
+DISTNAME=	hylafax-v3.0pl0
+PKGNAME=	hylafax-3.0.0
+MASTER_SITES=	ftp://ftp.sgi.com:sgi/fax/source/
+CATEGORIES+=	comms
+KEYWORDS+=	"fax modem"
+KEYWORDS+=	facsimile
+KEYWORDS+=	fax
+KEYWORDS+=	fax2ps
+KEYWORDS+=	faxalter
+KEYWORDS+=	faxcover
+KEYWORDS+=	faxd
+KEYWORDS+=	faxgetty
+KEYWORDS+=	faxmail
+KEYWORDS+=	faxrm
+KEYWORDS+=	faxstat
+KEYWORDS+=	sendfax
+HAS_CONFIGURE=	yes
+
+INSTALL= "sh port/install.sh"
+#	By default, FreeBSD make of ports sets INSTALL=install,
+#	<bsd.port.mk> says make wont allow variables to be unset.
+#	Hylafax ${WRKSRC}/configure needs a special (supplied) install
+#	(To quote ${WRKSRC}/config.site:
+#	   Beware of changing the INSTALL definition; you *must* have an
+# 	   install script that emulates the Silicon Graphics install program!
+#	) which it assumes you dont want if you set INSTALL.
+#	I would prefer to unset the INSTALL from the FreeBSD ports mechanism,
+#	but instead I reset it to what Hylafax wants.
+#	As this is still insufficient, See also patches/patch-ad.
+
+.if !exists(patches/patch-ab)
+IS_INTERACTIVE= yes
+#	patches/patch-ab makes this BATCH compilable,
+#	( If you need interactive config, mv patch-ab patch-ab.mv )
+.endif
+
+# EXEC_DEPENDS?=	ghostview:${PORTSDIR}/print/ghostview
+#	For viewing faxes, not essential for compiling.
+
+EXEC_DEPENDS+=	gs:${PORTSDIR}/print/ghostscript
+#	ghostscript is called by faxcover & sendfax.
+#	FreeBSD ports does not come with ghostscript-3 (the license is
+#	restrictive), FreeBSD ports comes with ghostscript-2.6.2, which
+#	is what I'm currently using. Sam Leffler wrote:
+#	Ghostscript versions since 3.12 have had a working tiffg32d
+#		driver, but beware of versions before 3.12 that have a
+#		tiffg32d driver; those drivers generate invalid 2D-encoded data.
+
+# Someone with more time & less space than me can investigate merging these.
+# LIB_DEPENDS=		something:${PORTSDIR}/graphics/tiff
+# ./libtiff has 2M, & may be duplicates of what is in ${PORTSDIR}/graphics/tiff
+# LIB_DEPENDS=          something:${PORTSDIR}/print/afm
+# ./afm/ has 536K of fonts, that perhaps could be merged.
+
+FAXCOVER?= /etc/faxcover.ps
+#	Default location to check for an optional over-riding host specific
+#	customised faxcover that will be installed in these sources,
+#	& end up where Hylafax installs all its stuff by default:
+#	/var/spool/fax/etc/....
+#	Note dont make FAXCOVER use a variable (such as ${PREFIX}),
+#	as that wont work in `exists' below.
+
+# ------------------------------------------------------------------------------
+
+pre-fetch:
+	@# Ref. ${DISTNAME} ...
+	@echo "Warning - Original distribution is:"
+	@echo "	ftp://ftp.sgi.com/sgi/fax/source/hylafax-v3.0pl0-tar.gz"
+	@echo "but /usr/share/mk/bsd.port*mk expects something.tar.gz, and "
+	@echo "will not allow something-tar.gz, "
+	@#	Perhaps asami@freebsd.org can be persuaded to investigate ?
+	@echo -n "so until someone enhances"
+	@echo "FreeBSD make macros, do this:"
+	@echo -n "	cd /usr/ports/distfiles ; "
+	@echo "ln -s hylafax-v3.0pl0-tar.gz hylafax-v3.0pl0.tar.gz"
+
+post-configure:
+.if exists(${FAXCOVER})
+	@echo I see you have ${FAXCOVER},
+	@echo which I will use to install a system default from.
+	@# When I suggested to Sam (in the flexfax mailing list) merging
+	@# in the distribution util/cover.templ & faxcover/faxcover.ps
+	@# ( as they are virtually identical) Sam said they're for
+	@# different things, & wouldn't do it.  I don't know what the
+	@# different purposes are, & I Do succesfully use the same file.
+	-cd ${WRKSRC} ; mv faxcover/faxcover.ps faxcover/faxcover.ps.mv
+	-cd ${WRKSRC} ; mv util/cover.templ util/cover.templ.mv
+	-cd ${WRKSRC} ; ln -s ../cover.ps faxcover/faxcover.ps
+	-cd ${WRKSRC} ; ln -s ../cover.ps util/cover.templ
+	-cd ${WRKSRC} ; ln -s ${FAXCOVER} cover.ps
+.endif
+.if exists(patches/patch-ab)
+	@echo "patches/patch-ab has supressed interactive configuration."
+	@# If you need interactive config, mv patch-ab patch-ab.mv
+.endif
+
+post-install:
+	cd ${PREFIX}/bin ; strip \
+		fax2ps faxalter faxcover faxmail faxrm faxstat sendfax sendpage
+	cd ${PREFIX}/sbin ; strip faxd.recv faxgetty faxq
+	@echo "Hylafax by default only does this sete[gu]id 0 stuff:"
+	@echo "	-u uucp -m 4755  faxq faxgetty"
+	@echo "If you, like I, think it needs more, run 'make suid'"
+	@echo "Now consider running	faxaddmodem"
+
+SUID_EXES= 	/usr/local/sbin/faxgetty
+SUID_EXES+=	/usr/local/sbin/faxq
+SUID_EXES+=	/usr/local/bin/faxrm
+SUID_EXES+=	/usr/local/bin/faxalter
+suid:
+	@# This does too much, & may perhaps cause security loopholes,
+	@# but default Hylafax doesnt do enough, eg faxrm wont work,
+	@# & even worse, I have received a faxes that then silent failed
+	@# to write to recvq.
+	@# Only fax modem users who test their hypotheses may change this !
+	@# (Imagine losing an important incoming fax, if recvq is unwritable.)
+	chown uucp ${SUID_EXES}
+	chgrp dialer ${SUID_EXES}
+	chmod 6555 ${SUID_EXES}
+	find /var/spool/fax -print | xargs chown uucp
+	find /var/spool/fax -print | xargs chgrp dialer
+	find /var/spool/fax -print | xargs chmod g+w
+	find /var/spool/fax -print | xargs chmod g+r
+	find /var/spool/fax -type d -print | xargs chmod g+x
+	# now remove some x bits that get set by mistake.
+	-cd /var/spool/fax ; chmod g-x FIFO* log/* status/* recvq/* sendq/* 
+	@echo "Now nonsider doing somethink like this:"
+	@echo "	sh"
+	@echo "	n=1"
+	@echo '	all="ttyd$$n ttyid$$n ttyld$$n cua0$$n cuai0$$n cual0$$n"'
+	@echo '	chown uucp $$all; chgrp dialer $$all; chmod 660 $$all'
+
+post-clean:
+	rm -f \
+		fax2ps/fax2ps		\
+		faxalter/faxalter	\
+		faxcover/faxcover	\
+		faxd/faxd		\
+		faxgetty/faxgetty	\
+		faxmail/faxmail		\
+		faxq/faxq		\
+		faxrm/faxrm		\
+		faxstat/faxstat		\
+		recvfax/recvfax		\
+		sendfax/sendfax		\
+		sendpage/sendpage	\
+		sgi2fax/sgi2fax
+	@# Sam Leffler (author of Hylafax) has a non standard view of
+	@# `make clean': he leaves binaries intact - deliberately !
+	@# One cannot use /usr/share/mk/bsd.port.mk re-clean: to invoke
+	@# `make clobber' before `make clean'
+	@# as it results in	`"rules", ... Could not find Makedepend'
+
+.include <bsd.port.mk>
diff --git a/comms/hylafax/distinfo b/comms/hylafax/distinfo
new file mode 100644
index 000000000000..303f30dc6454
--- /dev/null
+++ b/comms/hylafax/distinfo
@@ -0,0 +1 @@
+MD5 (hylafax-v3.0pl0.tar.gz) = ab3bdeee68a6cd64c270e09dffe928e7
diff --git a/comms/hylafax/files/README b/comms/hylafax/files/README
new file mode 100644
index 000000000000..a979996b61d8
--- /dev/null
+++ b/comms/hylafax/files/README
@@ -0,0 +1,225 @@
+	NOTES ON HYLAFAX IN FREEBSD (/usr/ports/comms/hylafax)
+		By Julian Stacey <jhs@freebsd.org> May 1995
+		 
+This port replaces flexfax (which is over a year old).
+Thanks to Sam Leffler of SGI for writing & releasing Hylafax :-)
+I <jhs@freebsd.org> wrote the FreeBSD ports/comm/hylafax/* files,
+
+Copyright Julian Stacey 1995:
+	Please preserve & comply with Sam Leffler's & SGI's legal stuff
+	I hereby release my work in this area for public use, & disclaim
+	all liability !  
+	Leave my name intact please, I'm a freelance, publicity can be useful.
+
+Documentation:
+	- On Line Manuals: 	man hylafax.
+	- World Wide Web site:	(http://www.vix.com/flexfax/
+	- Source tree:		Local copies of web in html & html/FAQ etc.
+
+Mailing List for Support, Development etc:
+	Don't mail me your fax or modem problems, nor post Hylafax
+	software bugs & fax modem problems to a Freebsd mail list.
+	The correct mail list:		flexfax@sgi.com
+
+Patches:
+	Bug reports, accompanied by diff -c patches, will be reviewed &
+	commited to FreeBSD/ports).
+
+Examples:
+	Syntax etc examples are in:  config.jhs config.ttyd1.jhs etc.ttys.jhs
+
+My Test Environment:
+	SupraFax V32bis + FreeBSD-2-current (May 1995)
+
+Outstanding:
+	I'm not sure if the lock file scheme is OK 
+		(It may be, I just used the default).
+	Some of the permissions are not right, 
+		(sometimes I get many email acknowledgements for each fax
+		sent (but fax is only sent once, no horrendous phone bill
+		... yet ;-)
+	My faxgetty will not answer as a normal modem (maybe its the modem,
+	or maybe my config file is wrong).
+
+---
+Julian Stacey  <jhs@freebsd.org>  Tel. +49 89 268616.   Fax Modem: 2608126 
+		http://www.regent.e-technik.tu-muenchen.de/people/jhs.html
+Vector Systems Ltd: an Internet, Unix & C consultancy in Munich Germany
+
+Appended are some example Config files:
+
+etc.ttys
+{-------
+ttyd1 "/usr/local/sbin/faxgetty" vt100 on unsecure
+-------}
+
+config
+{-------
+LogFacility:		daemon
+CountryCode:		49
+AreaCode:		89
+LongDistancePrefix:	0
+InternationalPrefix:	00
+DialStringRules:	etc/dialrules.europe
+ServerTracing:		1
+MaxSendPages:		20
+-------}
+
+config.ttyd1
+{-------
+# /var/spool/fax/etc/config.ttyd1 by jhs@freebsd.org
+# from $Header: /usr/people/sam/fax/config/RCS/rockwell,v 1.25 1995/03/10 23:36:02 sam Exp $
+# this file documented in man config
+
+# Sam says:
+# {
+# If you stop faxq then faxd.recv will remove the job itself;
+# otherwise if it sees faxq is running it passes the remove request on and
+# assumes the task was completed (there is no acknowledgement).
+
+# ServerTracing so that tracing messages are not sent out (listed in the
+# TODO file, a fix is welcome).  If you think this might be happening, try
+# echo "CServerTracing: 0x201">/var/spool/fax/FIFO
+# to force faxq to reset the current value for ServerTracing.
+# }
+
+# Configuration for a Rockwell-based Class 2 modem.
+#    Boca M1440E		firmware V1.270 or newer
+#    Dallas Fax			(throw it away!)
+#    Hayes Optima 24+Fax96	firmware TR00-J260-001 XXX or newer
+#    SupraFAX v.32bis		firmware V1.200-C or newer
+#    Twincom 144/DF		firmware revision V1.200 or newer
+#    Dynalink 1414VE
+# (and others)
+
+# This configuration file sets up the modem to run at 19.2 for
+# sending and for receiving.  XON/XOFF flow control is used on
+# the tty port.  RTS/CTS can be used by switching the flow control
+# setup, but beware of modems that do not support it during
+# facsimile operations.  Also beware that the adaptive-answer
+# facility, when supported, is usually unreliable.
+
+# AdaptiveAnswer	boolean  No   enable adaptive answer of inbound calls
+AdaptiveAnswer		Yes
+# AnswerRotary		string	Any	alternatives for answering calls
+# AnswerRotary		"fax data"
+# DestControls		jhs set later see man destctrls
+
+MaxDials		3 # max calls to transmit a job (presumably doing succesive pages)
+# Wrong numbers cost me 23pf per fail, & earache to whoever answers the phone !
+# MaxTries		3 # max attempts to transmit a job (3 default)
+NoCarrierRetrys		0 # default 1 # number of times to retry dialing on ``NO CARRIER''
+
+# JobReqBusy		integer	300	requeue interval for BUSY dial result
+
+MaxSendPages		20 # max pages to permit in a send
+
+# jhs later		QualifyTSI   file of TSI patterns for qualifying senders
+CountryCode:		49
+AreaCode:		89
+FAXNumber:		+49.89.2608126	# also used to name session log file
+LocalIdentifier:	"+49 89 2608126"
+LongDistancePrefix:	0
+InternationalPrefix:	00
+DialStringRules:	etc/dialrules.europe
+ServerTracing:		1
+SessionTracing:		11
+RecvFileMode:		0644 # if you have nosey users, consider 0600
+LogFileMode:	0644	# make it 0600 if calling card access codes are logged
+DeviceMode:		0600
+RingsBeforeAnswer:	2
+SpeakerVolume:		medium
+
+# Any appearance of ``%l'' is replaced with the tty name and any
+# appearance of ``%s'' is replaced with the serial port speed (in decimal).
+GettyArgs:	"std.%s -" # "std.%s ttyd1" # default is "-h %l dx_%s"
+# FreeBSD man getty says: 	getty [type [tty]]
+# FreeBSD man login says: -h specifies host from which the connection received.
+# kew@timesink.spk.wa.us (FreeBSD 2.1.0) uses "std.%s -".
+
+TagLineFont:		etc/lutRS18.pcf
+# pre jhs default was TagLineFormat:		"From %%l|%c|Page %%p of %%t"
+# %c gives American-only date format, which is confusing in Britain or Germany
+# so I use international accountancy date format: (19)95 08 01 (ie 1st Aug)
+# I use no words in my tag line, as fax may be in German or English.
+#---
+# allow at least 4 spaces before VSL as PCS fax chops left margin
+# dont actually use space char, as entabbing this file will lose it all
+# dont put too much in any one field or will overprint
+# %%l takes LocalIdentifier
+# %%n sender fax ie +49.89.2608126
+# %%d target fax ie +498968004525, from sendfax -d gary@68004.525
+# %%p page number inc. cover sheet
+# %%t total pages inc. cover sheet
+# jhs created `pages' symbol (\241 dec161 xa1) in lutRS18.pcf
+# jhs created `phone' symbol (\244 dec164 xa4) in lutRS18.pcf
+# `phone' & `pages' are inspired by symbols that pcs fax machine prints
+# PCS FAX is "Canon Fax 280" Model H11232, + H11 2325 + HA2 1324, REN=3
+TagLineFormat: "Fax %%n|Tel \244 +49 89 268616|\241 %%p/%%t %Y:%m:%d %H:%M"
+
+# MaxRecvPages:		unlimited
+
+# Modem-related stuff: should reflect modem command interface
+# and hardware connection/cabling (e.g. flow control).
+
+ModemType:		Class2		# use class 2 interface
+ModemRate:		19200		# fax send&recv is locked at 19.2
+ModemFlowControl:	xonxoff		# default
+
+ModemResetCmds:		AT&F2		# what you want for a Supra # JJ I have not checked operation since enabling this
+ModemNoFlowCmd:		AT&K		# disable flow control cmd
+ModemHardFlowCmd:	AT&K3		# hardware flow control cmd
+ModemSoftFlowCmd:	AT&K4		# software flow control cmd
+ModemSetupDTRCmd:	AT&D3		# DTR off causes modem to reset
+#ModemSetupDTRCmd:	AT&D2S25=1S38=0	# Dynalink 1414VE needs this
+ModemSetupDCDCmd:	AT&C1		# DCD follows carrier
+ModemSetupAACmd:	AT+FAA=1+FCLASS=0 # enable in current class
+# FAQ says: AT+FAA=1	Auto answer as facsimile or data depending on call
+
+ModemSendFillOrder:	LSB2MSB		# as expected
+ModemRecvFillOrder:	MSB2LSB		# opposite of what makes sense
+
+ModemDialCmd:		ATDT%s@		# T for tone dialing, @ for silence
+
+# Caller ID configuration setup for Supra.
+
+# QualifyCID:		etc/cid	(off by default) CID access control list file
+CIDNumber:		"NMBR = "	# pattern string for phone number info # JJ I have not checked operation since enabling this
+CIDName:		"NAME = "	# pattern string for identity info # JJ I have not checked operation since enabling this
+
+# DEFAULTS FOR REFERENCE
+# ModemAnswerFaxCmd             string     ATA              command for answering fax call
+# ModemAnswerDataCmd            string     ATA              command for answering data call
+
+# Class1RecvIdentTimer
+#               The time, in milliseconds, to wait for  an  initial
+#               DCS  when receiving a facsimile.  CCITT recommenda-
+#               tion T.30 specifies this as the  value  of  the  T1
+#               timer.  However, adaptive answering schemes such as
+#               that  described  above  under  the   AdaptiveAnswer
+#               parameter may require that this timer be shortened.
+# Class1RecvIdentTimer  35000 Class 1: max wait (ms) for initial ident frame
+Class1RecvIdentTimer	12000
+
+# Supra default wait for carrier is 50/10th sec, change with ats7=255
+# Datatronic default wait for carrier is 45/10th sec.
+# matthias says:	config.ttyd1
+# 
+# FaxT1Timer
+#	should  not be changed without full understanding of the ... server.
+#               The value of the T1 timer  in  milliseconds.   This
+#               timer  is used to time out the initial session con-
+#               tact; i.e. receipt of DIS/DCS.
+# FaxT1Timer             35000            CCITT T.30 T1 timer (ms)
+# 
+# AdaptiveAnswer:
+# Class1RecvIdentTimer  should be set to a value that
+#               is shorter than FaxT1Timer.
+# yet defaults for both are exactly the same: 35000 / 1000 sec.
+
+UUCPLockDir	/var/spool/lock	# jhs added this after seeing where kermit created a lock.
+UUCPLockType	ascii	# jhs added this after seeing what kermit created
+# Note kermit -l /dev/supra created /var/spool/lock/LCK..supra
+# (supra is a link to cua01, so the lock wont really work, as I'm running
+# gettyfax on ttyd1.
+-------}
diff --git a/comms/hylafax/files/patch-ab b/comms/hylafax/files/patch-ab
new file mode 100644
index 000000000000..03446a5f38db
--- /dev/null
+++ b/comms/hylafax/files/patch-ab
@@ -0,0 +1,32 @@
+This patch prepared by Julian Stacey <jhs@FreeBSD.Org
+
+Make this a BATCH compilable port, instead of IS_INTERACTIVE
+
+Warning before removing or renaming this patch,
+consult this code segment in ../Makefile:
+	.if !exists(patches/patch-aa)
+	IS_INTERACTIVE= yes  
+	.endif
+
+*** configure	Sat May 20 16:30:29 1995
+--- configure	Sat May 20 16:58:58 1995
+***************
+*** 2889,2895 ****
+  	fi
+  	checkForExecutable $PATH_SENDMAIL
+  	checkForExecutable $PATH_GETTY
+! 	printConfig; prompt "Are these ok [yes]?"; read ok
+  	test -z "$ok" && ok=yes
+  	case "$ok" in
+  	[1-9]|1[0-7])	promptForParameter $ok;;
+--- 2889,2898 ----
+  	fi
+  	checkForExecutable $PATH_SENDMAIL
+  	checkForExecutable $PATH_GETTY
+! 	printConfig
+! 	ok=yes	
+! 	echo "If you do not like this config, uncomment next prompt line in configure."
+! 	# prompt "Are these ok [yes]?"; read ok
+  	test -z "$ok" && ok=yes
+  	case "$ok" in
+  	[1-9]|1[0-7])	promptForParameter $ok;;
diff --git a/comms/hylafax/pkg-comment b/comms/hylafax/pkg-comment
new file mode 100644
index 000000000000..fcea4c154853
--- /dev/null
+++ b/comms/hylafax/pkg-comment
@@ -0,0 +1 @@
+hylafax-v3.0pl0 - version 3.0pl0 of the fax software package duplicates tiff code
diff --git a/comms/hylafax/pkg-descr b/comms/hylafax/pkg-descr
new file mode 100644
index 000000000000..3ddc577a466a
--- /dev/null
+++ b/comms/hylafax/pkg-descr
@@ -0,0 +1,14 @@
+HylaFAX is a facsimile system for UNIXtm systems. Among
+the features of HylaFAX are:
+-	HylaFAX runs as a network service; this means a fax
+	modem may be effectively shared by a large number of users.
+-	HylaFAX can be configured to work with a wide variety
+	of fax modems on a wide variety of systems.
+-	Access to the system can be restricted by the adminis-
+	trator to selected hosts and/or users.
+-	Transmission requests may be processed immediately (default) or queued 
+	for processing at a later time, in the manner of the at(1) command.
+-	Remote facsimile machines may be polled to retrieve
+	publicly available documents.
+
+					Julian Stacey <jhs@freebsd.org>
diff --git a/comms/hylafax/pkg-plist b/comms/hylafax/pkg-plist
new file mode 100644
index 000000000000..deaf21dc39b4
--- /dev/null
+++ b/comms/hylafax/pkg-plist
@@ -0,0 +1,209 @@
+@comment PLIST by Julian Stacey	<JHS@FreeBSD.Org>
+
+@name hylafax
+
+@pkgdep		ghostscript
+@comment	Ghostscript versions since 3.12 have had a working tiffg32d
+
+@cwd		/usr/local
+@dirrm		/var/spool/fax
+@dirrm		/usr/local/lib/fax
+
+@comment	theres no example of good @mtree syntax in ports yet
+@comment	when such example appears, it will be worth converting this
+@comment	so that mtree can do the mkdir work:
+@comment		@cwd
+@comment		@owner	bin 
+@comment		@group	bin 
+@comment		@mode	755 
+@comment		/usr/local/bin 
+@comment		/usr/local/lib/fax 
+@comment		/usr/local/sbin
+@comment		@owner	uucp 
+@comment		@group	dialer 
+@comment		@mode	755 
+@comment		/var/spool/fax
+@comment		/var/spool/fax/bin 
+@comment		/var/spool/fax/config 
+@comment		/var/spool/fax/etc 
+@comment		/var/spool/fax/recvq 
+@comment		/var/spool/fax/info 	(No pkg file here, but need dir
+@comment		/var/spool/fax/log 	(No pkg file here, but need dir
+@comment		/var/spool/fax/status	(No pkg file here, but need dir
+@comment		@owner	uucp 
+@comment		@group	dialer 
+@comment		@mode	700 
+@comment		/var/spool/fax/sendq 
+@comment		/var/spool/fax/docq 
+@comment		/var/spool/fax/tmp
+
+@cwd		/var/spool/fax
+@mode		600
+@comment	fifo
+FIFO
+@mode		444
+COPYRIGHT
+
+@cwd		/var/spool/fax/bin
+notify
+@mode		444
+ps2fax.gs
+ps2fax.dps
+ps2fax
+notify.awk
+@mode		555
+faxrcvd
+pollrcvd
+mkcover
+transcript
+
+@cwd		/var/spool/fax/config
+@mode		444
+class1
+class2
+class2.0
+skel
+att-dataport-2
+att-dataport-2.0
+att-dataport
+cirrus
+dsi-scout+
+e-tech
+everex-2496d
+exar
+gvc-288
+gvc-288-2
+intel-400e
+moto-288
+mt-1432
+nuvo-voyager
+ppi-pm14400fxmt
+ppi-pm14400fxsa
+rc144ac
+rc144ac-1
+rc288dpi
+rc288dpi-1
+rc32acl
+rc32acl-1
+telebit-t3000
+telebit-qblazer
+telebit-wb
+tricom2842
+uds-fastalk
+usr-2.0
+usr-rts
+usr-xon
+zyxel-1496e
+zyxel-1496e-1
+zyxel-1496e-2.0
+
+@cwd		/var/spool/fax/etc
+@mode		444
+dpsprinter.ps
+cover.templ
+dialrules
+dialrules.sf-ba
+dialrules.europe
+@mode		644
+lutRS18.pcf
+hosts
+xferlog
+
+@cwd		/usr/local/bin
+@mode		555
+sendpage
+fax2ps
+faxalter
+faxcover
+
+@cwd		/usr/local/sbin
+@owner		uucp
+@group		dialer
+@mode		6555
+faxq
+faxgetty
+@owner		uucp
+@group		dialer
+
+@mode		555
+textfmt
+faxmsg
+faxabort
+faxanswer
+faxquit
+faxinfo
+dialtest
+typetest
+xferstats
+recvstats
+faxcron
+faxsend
+pagesend
+tsitest
+tagtest
+lockname
+ondelay
+faxaddmodem
+probemodem
+
+@cwd		/usr/local/lib/fax
+@mode		444
+pagesizes
+typerules
+faxcover.ps
+
+@cwd		/usr/local/man/man1
+@mode		444
+fax2ps.1
+faxalter.1
+faxcover.1
+faxmail.1
+faxrm.1
+faxstat.1
+hylafax.1
+sendfax.1
+sendpage.1
+sgi2fax.1
+textfmt.1
+
+@cwd		/usr/local/man/man5
+pagesizes.5f
+typerules.5f
+cid.5f
+config.5f
+destctrls.5f
+dialrules.5f
+hosts.5f
+hylafax.5f
+info.5f
+log.5f
+recvq.5f
+sendq.5f
+status.5f
+tsi.5f
+xferlog.5f
+
+@cwd		/usr/local/man/man8
+dialtest.8c
+faxabort.8c
+faxaddmodem.8c
+faxanswer.8c
+faxcron.8c
+faxd.recv.8c
+faxgetty.8c
+faxq.8c
+faxquit.8c
+faxrcvd.8c
+faxsend.8c
+mkcover.8c
+notify.8c
+pagesend.8c
+pollrcvd.8c
+ps2fax.8c
+recvstats.8c
+tagtest.8c
+transcript.8c
+tsitest.8c
+xferstats.8c
+
+@comment	end