- Use SF macro in MASTER_SITES.

- Add more OPTIONS and knobs.

6 files changed, 198 insertions, 175 deletions

diff --git a/emulators/bochs/Makefile b/emulators/bochs/Makefile
index 779c3d60e01c..93f576f57ed8 100644
--- a/emulators/bochs/Makefile
+++ b/emulators/bochs/Makefile
@@ -1,4 +1,3 @@
-# ex:ts=8
 # Ports collection makefile for:  bochs
 # Date created:			  16 December 1997
 # Whom:				  alex
@@ -10,27 +9,49 @@ PORTNAME=	bochs
 PORTVERSION=	2.3
 PORTEPOCH=	2
 CATEGORIES=	emulators
-MASTER_SITES=	${MASTER_SITE_SOURCEFORGE}
-MASTER_SITE_SUBDIR=	${PORTNAME}
+MASTER_SITES=	SF
 
 MAINTAINER=	ports@FreeBSD.org
 COMMENT=	An IA-32 (x86) PC emulator that runs DOS, Win 95, and more
 
 BUILD_DEPENDS=	mkfontdir:${X_CLIENTS_PORT}
-RUN_DEPENDS=	mkfontdir:${X_CLIENTS_PORT}
+RUN_DEPENDS:=	${BUILD_DEPENDS}
 
-USE_XLIB=	yes
 USE_GMAKE=	yes
-
 GNU_CONFIGURE=	yes
-CONFIGURE_TARGET=	--build=${MACHINE_ARCH}-portbld-freebsd${OSREL}
-CONFIGURE_ARGS=	--disable-split-hd \
-		--enable-all-optimizations \
-		--with-x11 \
-		--enable-pci \
-		--enable-sb16=freebsd \
-		--enable-ne2000 \
-		--enable-vbe
+CONFIGURE_ARGS=	--disable-docbook
+CONFIGURE_TARGET=	--build=${ARCH}-portbld-freebsd${OSREL}
+CONFIGURE_ENV=	LDFLAGS="-L${LOCALBASE}/lib"
+
+OPTIONS=	CDROM "Enable CDROM support" on \
+		CLGD54XX "Enable Cirrus Logic GD54xx video card" off \
+		DEBUGGER "Enable debugger and disassembler support" off \
+		DEBUGGER_X86 "Enable x86 hardware debugger" off \
+		FPU "Enable FPU emulator" on \
+		IDLE_HACK "Keep Bochs from using all CPU time" off \
+		IGNORE_BAD_MSR "Ignore unknown MSR references (don't panic)" off \
+		NE2000 "Enable limited ne2000 support" on \
+		NEW_PIT "Enable use of the new PIT model" on \
+		OPTIMIZATIONS "Enable all safe speeed optimizations" on \
+		PCI "Enable limited i440FX PCI support" on \
+		PLUGINS "Enable building dynamic loadable plugins" off \
+		PNIC "Enable PCI pseudo NIC (network card) support" off \
+		PORT_E9_HACK "Writes to port e9 go to console" on \
+		READLINE "Enable readline support in debugger" off \
+		RFB "Enable VNC server support in display" off \
+		SAVE_RESTORE "Enable limited save/restore support" off \
+		SB16 "Enable Sound Blaster 16 emulation" on \
+		SDL "Enable SDL display interface" off \
+		SHOW_IPS "Enable logging of measured IPS" off \
+		SMP "Enable SMP simulation support (CPU level 6)" off \
+		SVGA "Enable SVGAlib support" off \
+		TERM "Use text only, console based interface" off \
+		USB "Enable limited i440FX PCI USB support" off \
+		VBE "Enable VGA BIOS Extensions" on \
+		WX "Use WxWidgets display interface" off \
+		X11 "Use X11 display interface" on \
+		X86_64 "Enable AMD x86-64 support" off \
+		XPM "Enable XPM library support" off
 
 CFLAGS+=	-fno-rtti -fno-exceptions -fomit-frame-pointer
 
@@ -40,106 +61,194 @@ MAN5=		bochsrc.5
 
 SUB_FILES=	pkg-message
 
-.if defined(WITH_BOCHS_SMP)
-CONFIGURE_ARGS+=	--enable-smp
-WITH_BOCHS_CPU_LEVEL=	6
+.include <bsd.port.pre.mk>
+
+.if defined(WITHOUT_TERM) && defined(WITHOUT_WX) && defined(WITHOUT_X11)
+CONFIGURE_ARGS+=--with-nogui
+.endif
+
+.if defined(WITHOUT_CDROM)
+CONFIGURE_ARGS+=--disable-cdrom
+.endif
+
+.if defined(WITH_CLGD54XX)
+CONFIGURE_ARGS+=--enable-clgd54xx
+.endif
+
+.if defined(WITH_DEBUGGER)
+CONFIGURE_ARGS+=--enable-debugger --enable-disasm
+.endif
+
+.if defined(WITH_DEBUGGER_X86)
+CONFIGURE_ARGS+=--enable-x86-debugger
+.endif
+
+.if defined(WITH_FPU)
+CONFIGURE_ARGS+=--enable-fpu
+.endif
+
+.if defined(WITH_IDLE_HACK)
+CONFIGURE_ARGS+=--enable-idle-hack
+.endif
+
+.if defined(WITH_IGNORE_BAD_MSR)
+CONFIGURE_ARGS+=--enable-ignore-bad-msr
+.endif
+
+.if defined(WITH_NE2000)
+CONFIGURE_ARGS+=--enable-ne2000
+.endif
+
+.if defined(WITHOUT_NEW_PIT)
+CONFIGURE_ARGS+=--disable-new-pit
+.endif
+
+.if defined(WITH_OPTIMIZATIONS)
+CONFIGURE_ARGS+=--enable-all-optimizations
+.endif
+
+.if defined(WITH_PCI)
+CONFIGURE_ARGS+=--enable-pci
 .endif
 
-.if defined(WITH_BOCHS_CPU_LEVEL)
-.if ${WITH_BOCHS_CPU_LEVEL} < 3 || ${WITH_BOCHS_CPU_LEVEL} > 6
-IGNORE=	cannot install: WITH_BOCHS_CPU_LEVEL must be an integer value between 3 and 6
+.if defined(WITH_PLUGINS)
+CONFIGURE_ARGS+=--enable-plugins
 .endif
-CONFIGURE_ARGS+=	--enable-cpu-level=${WITH_BOCHS_CPU_LEVEL}
-.if ${WITH_BOCHS_CPU_LEVEL} < 5
-CONFIGURE_ARGS+=	--disable-mmx
+
+.if defined(WITH_PNIC)
+CONFIGURE_ARGS+=--enable-pnic
 .endif
+
+.if defined(WITHOUT_PORT_E9_HACK)
+CONFIGURE_ARGS+=--disable-port-e9-hack
 .endif
 
-.if defined(WITH_BOCHS_GUI_TERM)
-CONFIGURE_ARGS+=	--with-term
+.if defined(WITH_READLINE)
+CONFIGURE_ARGS+=--enable-readline
+.else
+CONFIGURE_ARGS+=--disable-readline
 .endif
 
-.if defined(WITH_BOCHS_GUI_NOGUI)
-CONFIGURE_ARGS+=	--with-nogui
+.if defined(WITH_RFB)
+CONFIGURE_ARGS+=--with-rfb
 .endif
 
-.if defined(WITH_BOCHS_AMD64)
-CONFIGURE_ARGS+=	--enable-x86-64
+.if defined(WITH_SB16)
+CONFIGURE_ARGS+=--enable-sb16=freebsd
 .endif
 
-.if defined(WITH_BOCHS_DEBUGGER)
-CONFIGURE_ARGS+=	--enable-debugger --enable-disasm
+.if defined(WITH_SMP)
+CONFIGURE_ARGS+=--enable-smp
+WITH_CPU_LEVEL=	6
 .endif
 
-.if defined(WITH_BOCHS_X86_DEBUGGER)
-CONFIGURE_ARGS+=	--enable-x86-debugger
+.if defined(WITH_SAVE_RESTORE)
+CONFIGURE_ARGS+=--enable-save-restore
 .endif
 
-.if defined(WITH_BOCHS_PORT_E9_HACK)
-CONFIGURE_ARGS+=	--enable-port-e9-hack
+.if defined(WITH_SDL)
+USE_SDL=	sdl
+CONFIGURE_ARGS+=--with-sdl
 .endif
 
-pre-patch::
-	@${ECHO_MSG}
-.if !defined(WITH_BOCHS_CPU_LEVEL)
-	@${ECHO_MSG} "If you want to change the processor level to emulate (default is 5, aka Pentium)"
-	@${ECHO_MSG} "Choices are 3,4,5,6 which mean target 386, 486, Pentium or Pentium Pro emulation"
-	@${ECHO_MSG} "hit Ctrl-C right now and use \"make WITH_BOCHS_CPU_LEVEL=<cpu level>\""
-	@${ECHO_MSG}
+.if defined(WITH_SHOW_IPS)
+CONFIGURE_ARGS+=--enable-show-ips
 .endif
-.if !defined(WITH_BOCHS_GUI_TERM)
-	@${ECHO_MSG} "If you want to enable the plain text, console-based bochs interface"
-	@${ECHO_MSG} "hit Ctrl-C right now and use \"make WITH_BOCHS_GUI_TERM=yes\""
-	@${ECHO_MSG}
+
+.if defined(WITH_SVGA)
+LIB_DEPENDS+=	vga.1:${PORTSDIR}/graphics/svgalib
+CONFIGURE_ARGS+=--with-svga
 .endif
-.if !defined(WITH_BOCHS_GUI_NOGUI)
-	@${ECHO_MSG} "If you want the bochs display"
-	@${ECHO_MSG} "hit Ctrl-C right now and use \"make WITH_BOCHS_GUI_NOGUI=yes\""
-	@${ECHO_MSG}
+
+.if defined(WITH_TERM)
+CONFIGURE_ARGS+=--with-term
 .endif
-.if !defined(WITH_BOCHS_SMP)
-	@${ECHO_MSG} "If you want to compile with SMP support (implies WITH_BOCHS_CPU_LEVEL=6),"
-	@${ECHO_MSG} "hit Ctrl-C right now and use \"make WITH_BOCHS_SMP\""
-	@${ECHO_MSG}
+
+.if defined(WITH_USB)
+CONFIGURE_ARGS+=--enable-usb
 .endif
-.if !defined(WITH_BOCHS_DEBUGGER)
-	@${ECHO_MSG} "If you want to compile with builtin debugger and disassembler support,"
-	@${ECHO_MSG} "hit Ctrl-C right now and use \"make WITH_BOCHS_DEBUGGER=yes\""
-	@${ECHO_MSG}
+
+.if defined(WITH_VBE)
+CONFIGURE_ARGS+=--enable-vbe
 .endif
-.if !defined(WITH_BOCHS_X86_DEBUGGER)
-	@${ECHO_MSG} "If you want to compile with x86 hardware debugger support,"
-	@${ECHO_MSG} "hit Ctrl-C right now and use \"make WITH_BOCHS_X86_DEBUGGER=yes\""
-	@${ECHO_MSG}
+
+.if defined(WITH_WX)
+USE_WX=		2.4-2.6
+CONFIGURE_ARGS+=--with-wx
+.endif
+
+.if defined(WITH_X11)
+USE_XLIB=	yes
+CONFIGURE_ARGS+=--with-x11
 .endif
-.if !defined(WITH_BOCHS_AMD64)
-	@${ECHO_MSG} "If you want to compile with AMD x86-64 support,"
-	@${ECHO_MSG} "hit Ctrl-C right now and use \"make WITH_BOCHS_AMD64=yes\""
-	@${ECHO_MSG}
+
+.if defined(WITH_X86_64)
+CONFIGURE_ARGS+=--enable-x86-64
 .endif
-.if !defined(WITH_BOCHS_PORT_E9_HACK)
-	@${ECHO_MSG} "If you want to compile with port e9 hack support,"
-	@${ECHO_MSG} "hit Ctrl-C right now and use \"make WITH_BOCHS_PORT_E9_HACK=yes\""
-	@${ECHO_MSG}
+
+.if defined(WITH_XPM)
+USE_XPM=	yes
+CONFIGURE_ARGS+=--with-xpm
 .endif
 
+.if defined(WITH_CPU_LEVEL)
+.if ${WITH_CPU_LEVEL} < 3 || ${WITH_CPU_LEVEL} > 6
+IGNORE=		can not install: WITH_CPU_LEVEL must be an integer value between 3 and 6
+.endif
+CONFIGURE_ARGS+=--enable-cpu-level=${WITH_CPU_LEVEL}
+.if ${WITH_CPU_LEVEL} < 5
+CONFIGURE_ARGS+=--disable-mmx
+.endif
+.endif
+
+.if defined(WITH_SSE_LEVEL)
+.if ${WITH_SSE_LEVEL} >= 1 && ${WITH_SSE_LEVEL} <= 3
+CONFIGURE_ARGS+=--enable-sse=${WITH_SSE_LEVEL}
+.else
+IGNORE=		can not install: WITH_SSE_LEVEL must be an integer value between 1 and 3
+.endif
+.endif
+
+pre-everything::
+	@${ECHO_CMD}
+.if !defined(WITH_CPU_LEVEL)
+	@${ECHO_CMD} "If you want to change the processor level to emulate (default is 5, aka Pentium), set WITH_CPU_LEVEL to the desired value. Choices are 3, 4, 5 and 6 which mean target 386, 486, Pentium or Pentium Pro emulation." | ${FMT}
+.endif
+.if !defined(WITH_SSE_LEVEL)
+	@${ECHO_CMD} "If you want to enable SSE you have to set WITH_SSE_LEVEL to 1, 2 or 3." | ${FMT}
+.endif
+	@${ECHO_CMD}
+
 post-patch:
-	@${REINPLACE_CMD} -E ' \
-		s|file=bios/|file=${DATADIR}/|; \
-		s|bios/VGABIOS|${DATADIR}/VGABIOS|; \
-		' ${WRKSRC}/.bochsrc
-	@${REINPLACE_CMD} -E ' \
-		s|install_share install_doc|install_share|; \
-		s|(^sharedir.+=).+|\1 ${DATADIR}|; \
-		s|(^docdir.+=).+|\1 ${DOCSDIR}|; \
-		' ${WRKSRC}/Makefile.in
-	@${REINPLACE_CMD} -e ' \
-		s|/usr/local/share/bochs|${DATADIR}|; \
-		s|/usr/local/share/doc/bochs|${DOCSDIR}|; \
-		' ${WRKSRC}/doc/docbook/user/user.dbk ${WRKSRC}/doc/man/*.1 \
-		${WRKSRC}/doc/man/*.5
+	@${REINPLACE_CMD} -Ee \
+		's|$$BXSHARE/|${DATADIR}/|; \
+		 s|^#clock: sync=none|clock: sync=realtime|; \
+		 s|^log: .+|log: /dev/null|; \
+		 s|^panic: .+|panic: action=ask|; \
+		 s|^parport1: .+|#&|' \
+		 ${WRKSRC}/.bochsrc
+	@${REINPLACE_CMD} -Ee \
+		's|(^sharedir.+=).+|\1 ${DATADIR}|; \
+		 s|(^docdir.+=).+|\1 ${DOCSDIR}|' \
+		 ${WRKSRC}/Makefile.in
+	@${REINPLACE_CMD} -e \
+		's|/usr/local/share/bochs|${DATADIR}|; \
+		 s|/usr/local/share/doc/bochs|${DOCSDIR}|' \
+		 ${WRKSRC}/doc/docbook/user/user.dbk ${WRKSRC}/doc/man/*.[15]
+	@${REINPLACE_CMD} -Ee 's|/usr/(include/vga\.h)|${LOCALBASE}/\1|' \
+		${WRKSRC}/gui/svga.cc
+.if defined(WITH_SVGA)
+	@${REINPLACE_CMD} -e 's|-lvga -lvgagl|@LDFLAGS@ &|' \
+		${WRKSRC}/gui/Makefile.in
+.endif
 
 post-install:
+.if defined(WITH_PLUGINS)
+	@${FIND} ${PREFIX}/lib/bochs ! -type d | \
+		${SED} 's,^${PREFIX}/,,' >> ${TMPPLIST}
+	@${FIND} ${PREFIX}/lib/bochs -type d | ${SORT} -r | \
+		${SED} 's,^${PREFIX}/,@dirrm ,' >> ${TMPPLIST}
+.endif
 .if !defined(NOPORTDOCS)
 	@${MKDIR} ${DOCSDIR}
 	@${INSTALL_DATA} ${WRKSRC}/CHANGES ${DOCSDIR}/CHANGES
@@ -150,6 +259,6 @@ post-install:
 	@${MKDIR} ${DOCSDIR}/html
 	@${INSTALL_DATA} ${WRKSRC}/docs-html/*.html ${DOCSDIR}/html
 .endif
-	@${CAT} ${PKGMESSAGE}
+	@${ECHO_CMD}; ${CAT} ${PKGMESSAGE}; ${ECHO_CMD}
 
-.include <bsd.port.mk>
+.include <bsd.port.post.mk>
diff --git a/emulators/bochs/files/bochs.sh b/emulators/bochs/files/bochs.sh
deleted file mode 100644
index 1c93e9789f2c..000000000000
--- a/emulators/bochs/files/bochs.sh
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/sh
-#
-# $FreeBSD$
-#
-# Bochs wrapper
-#
-
-bin_dir=%%PREFIX%%/libexec
-xbin_dir=%%X11BASE%%/bin
-font_dir=%%FONT_DIR%%
-
-${xbin_dir}/xset -q | grep -q ${font_dir}
-rc=$?
-
-if [ $rc != 0 ]; then
-	${xbin_dir}/xset fp+ ${font_dir}
-	${xbin_dir}/xset fp rehash
-fi
-
-${bin_dir}/bochs.bin ${1+"$@"}
-
-if [ $rc != 0 ]; then
-	${xbin_dir}/xset fp- ${font_dir}
-	${xbin_dir}/xset fp rehash
-fi
diff --git a/emulators/bochs/files/patch-aa b/emulators/bochs/files/patch-aa
deleted file mode 100644
index 12d5dae4a650..000000000000
--- a/emulators/bochs/files/patch-aa
+++ /dev/null
@@ -1,62 +0,0 @@
---- .bochsrc.orig	Sun Jan 29 07:56:01 2006
-+++ .bochsrc	Mon Feb 20 21:10:38 2006
-@@ -74,7 +74,7 @@
- # now supported, but we still recommend to use the BIOS distributed with
- # Bochs. Now the start address can be calculated from image size.
- #=======================================================================
--romimage: file=$BXSHARE/BIOS-bochs-latest, address=0xf0000
-+romimage: file=/usr/local/share/bochs/BIOS-bochs-latest, address=0xf0000
- #romimage: file=mybios.bin, address=0xfff80000 # 512k at memory top
- #romimage: file=mybios.bin # calculate start address from image size
- 
-@@ -147,9 +147,9 @@
- # VGAROMIMAGE
- # You now need to load a VGA ROM BIOS into C0000.
- #=======================================================================
--#vgaromimage: file=bios/VGABIOS-elpin-2.40
--vgaromimage: file=$BXSHARE/VGABIOS-lgpl-latest
--#vgaromimage: file=bios/VGABIOS-lgpl-latest-cirrus
-+#vgaromimage: file=/usr/local/share/bochs/VGABIOS-elpin-2.40
-+vgaromimage: file=/usr/local/share/bochs/VGABIOS-lgpl-latest
-+#vgaromimage: file=/usr/local/share/bochs/VGABIOS-lgpl-latest-cirrus
- 
- #=======================================================================
- # VGA:
-@@ -319,7 +319,7 @@
- # 
- # Default value are sync=none, time0=local
- #=======================================================================
--#clock: sync=none, time0=local
-+clock: sync=realtime, time0=local
- 
- 
- #=======================================================================
-@@ -344,8 +344,8 @@
- #   log: ./bochs.out
- #   log: /dev/tty
- #=======================================================================
--#log: /dev/null
--log: bochsout.txt
-+log: /dev/null
-+#log: bochsout.txt
- 
- #=======================================================================
- # LOGPREFIX:
-@@ -385,7 +385,7 @@
- # cause bochs to become unstable.  The panic is a "graceful exit," so
- # if you disable it you may get a spectacular disaster instead.
- #=======================================================================
--panic: action=ask
-+panic: action=fatal
- error: action=report
- info: action=report
- debug: action=ignore
-@@ -442,7 +442,7 @@
- #   parport2: enabled=1, file="/dev/lp0"
- #   parport1: enabled=0
- #=======================================================================
--parport1: enabled=1, file="parport.out"
-+#parport1: enabled=1, file="parport.out"
- 
- #=======================================================================
- # SB16:
diff --git a/emulators/bochs/files/pkg-message.in b/emulators/bochs/files/pkg-message.in
index 2985cb484324..7b46ee416780 100644
--- a/emulators/bochs/files/pkg-message.in
+++ b/emulators/bochs/files/pkg-message.in
@@ -1,7 +1,7 @@
 ===========================================================================
 
 Bochs requires a .bochsrc file to be present in either your current
-directory or your home directory before starting.  A sample .bochsrc
+directory or your home directory before starting. A sample .bochsrc
 file can be found in %%DOCSDIR%%/bochsrc-sample.txt
 
 ===========================================================================
diff --git a/emulators/bochs/pkg-descr b/emulators/bochs/pkg-descr
index c025bbb90db0..31fb2bd2a0da 100644
--- a/emulators/bochs/pkg-descr
+++ b/emulators/bochs/pkg-descr
@@ -5,7 +5,7 @@ be compiled to emulate a 386, 486, Pentium, Pentium Pro or AMD64 CPU,
 including optional MMX, SSE, SSE2 and 3DNow instructions.
 
 Bochs is capable of running most Operating Systems inside the emulation
-including Linux, Windows 95, DOS, and Windows NT 4.
+including Linux, DOS, Windows® 95/98 and Windows® NT/2000/XP.
 
 Bochs was written by Kevin Lawton and is currently maintained by the Bochs
 project.
diff --git a/emulators/bochs/pkg-plist b/emulators/bochs/pkg-plist
index b38f76248f03..01fba0ef0b8a 100644
--- a/emulators/bochs/pkg-plist
+++ b/emulators/bochs/pkg-plist
@@ -23,6 +23,7 @@ bin/bximage
 %%DATADIR%%/keymaps/x11-pc-si.map
 %%DATADIR%%/keymaps/x11-pc-uk.map
 %%DATADIR%%/keymaps/x11-pc-us.map
+%%PORTDOCS%%%%DOCSDIR%%/COPYING
 %%PORTDOCS%%%%DOCSDIR%%/CHANGES
 %%PORTDOCS%%%%DOCSDIR%%/README
 %%PORTDOCS%%%%DOCSDIR%%/TODO