Add qmail-vida 0.53, SMTP_AUTH/APOP support for qmail.

PR:		ports/85250
Submitted by:	FURUTATE,Mikihiko<futurebsd@infoseek.to>

19 files changed, 1139 insertions, 0 deletions

diff --git a/mail/qmail-vida/Makefile b/mail/qmail-vida/Makefile
new file mode 100644
index 000000000000..bde50a9d6240
--- /dev/null
+++ b/mail/qmail-vida/Makefile
@@ -0,0 +1,319 @@
+# New ports collection makefile for:	qmail-vida
+# Date created:				22 Aug 2005
+# Whom:					FURUTATE,Mikihiko<futurebsd@infoseek.to>
+#
+# $FreeBSD$
+#
+
+PORTNAME=	qmail-vida
+PORTVERSION=	0.53
+CATEGORIES=	mail
+MASTER_SITES+=	${MASTER_SITE_SOURCEFORGE_JP:S/$/:vida/}	\
+		${MASTER_SITE_QMAIL:S/$/:qmail/}	\
+		http://cr.yp.to/checkpwd/:checkpassword	\
+		http://cr.yp.to/ucspi-tcp/:tcpserver
+MASTER_SITE_SUBDIR=${PORTNAME}/2100/:vida
+
+MAINTAINER?=	future@future-ta.com
+COMMENT=	SMTP_AUTH/APOP support for qmail
+
+DISTFILES=	${DISTNAME}.tar.gz:vida	\
+		${DISTNAME_QMAIL}.tar.gz:qmail		\
+		${DISTNAME_CHECKPASSWORD}.tar.gz:checkpassword	\
+		${DISTNAME_TCPSERVER}.tar.gz:tcpserver
+DIST_SUBDIR=	qmail-vida
+PATCH_WRKSRC=	${WRKSRC_QMAIL}
+
+CONFLICTS=	qmail-[0-9]* qmail-mysql-[0-9]* qmail-ldap-[0-9]* \
+		qmail-smtp_auth+tls-[0-9]* qmail-spamcontrol-[0-9]* \
+		qmail-tls-[0-9]* checkpassword-[0-9]* ucspi-tcp-[0-9]* \
+		daemontools-[0-9]*
+
+DISTNAME_QMAIL=			qmail-1.03
+DISTNAME_CHECKPASSWORD=		checkpassword-0.90
+DISTNAME_TCPSERVER=		ucspi-tcp-0.88
+
+WRKSRC_QMAIL=		${WRKDIR}/${DISTNAME_QMAIL}
+WRKSRC_CHECKPASSWORD=	${WRKDIR}/${DISTNAME_CHECKPASSWORD}
+WRKSRC_TCPSERVER=	${WRKDIR}/${DISTNAME_TCPSERVER}
+
+WRKSRC=		${WRKDIR}/${PORTNAME}-${PORTVERSION}
+PKGINSTALL?=	${WRKDIR}/pkg-install
+CSH?=		/bin/csh
+PREFIX?=	/var/qmail
+PORTDOCS=	*
+
+NO_PACKAGE=	"djb\'s packaging license does not allow non-standard qmail binary distributions"
+
+QMAIL_VERSION?=		1.03
+
+ALL_TARGET_QMAIL=	default dot-qmail.5 qmail-control.5 qmail-getpw.8 \
+			qmail-limits.7 qmail-newmrh.8 qmail-newu.8 qmail-pw2u.8 \
+			qmail-send.8 qmail-start.8 qmail-users.5
+
+ALL_TARGET_CHECKPASSWORD=	it
+ALL_TARGET_TCPSERVER=		prog install instcheck
+
+SCRIPTS_ENV=	BINOWN="${BINOWN}" BINGRP="${BINGRP}" BINMODE="${BINMODE}" \
+		MANMODE="${MANMODE}" CFLAGS="${CFLAGS}"
+
+PLIST_SUB+=	README_AUTH="@comment "
+PLIST_SUB+=	LDAP="@comment " NOT_LDAP=""
+PLIST_SUB+=	SMTP_AUTH_TLS="@comment "
+PLIST_SUB+=	SPAMCONTROL="@comment "
+PLIST_SUB+=	TLS="@comment "
+
+SUB_FILES+=	pkg-message${PKGMESSAGE_SUFFIX} mailer.conf.sample \
+		bootfiles.sed enable-qmail
+PKGINSTALL?=	${WRKDIR}/pkg-install
+PKGMESSAGE?=	${WRKDIR}/pkg-message${PKGMESSAGE_SUFFIX}
+
+DOCFILES+=	${WRKSRC_QMAIL}/BLURB ${WRKSRC_QMAIL}/BLURB2 ${WRKSRC_QMAIL}/BLURB3 \
+		${WRKSRC_QMAIL}/BLURB4 ${WRKSRC_QMAIL}/INTERNALS ${WRKSRC_QMAIL}/SECURITY \
+		${WRKSRC_QMAIL}/THOUGHTS ${FILESDIR}/PORT_NOTES \
+		${FILESDIR}/PORT_NOTES_FreeBSD_40-RELEASE \
+		${WRKDIR}/mailer.conf.sample \
+		${WRKSRC_QMAIL}/FAQ ${WRKSRC_QMAIL}/UPGRADE ${WRKSRC_QMAIL}/SENDMAIL \
+		${WRKSRC_QMAIL}/INSTALL ${WRKSRC_QMAIL}/INSTALL.alias \
+		${WRKSRC_QMAIL}/INSTALL.ctl ${WRKSRC_QMAIL}/INSTALL.ids \
+		${WRKSRC_QMAIL}/INSTALL.maildir ${WRKSRC_QMAIL}/INSTALL.mbox \
+		${WRKSRC_QMAIL}/INSTALL.vsm ${WRKSRC_QMAIL}/TEST.deliver \
+		${WRKSRC_QMAIL}/TEST.receive ${WRKSRC_QMAIL}/REMOVE.sendmail \
+		${WRKSRC_QMAIL}/REMOVE.binmail ${WRKSRC_QMAIL}/PIC.local2alias \
+		${WRKSRC_QMAIL}/PIC.local2ext ${WRKSRC_QMAIL}/PIC.local2local \
+		${WRKSRC_QMAIL}/PIC.local2rem ${WRKSRC_QMAIL}/PIC.local2virt \
+		${WRKSRC_QMAIL}/PIC.nullclient ${WRKSRC_QMAIL}/PIC.relaybad \
+		${WRKSRC_QMAIL}/PIC.relaygood ${WRKSRC_QMAIL}/PIC.rem2local
+
+CONFIGUREPROGS=	${WRKSRC_QMAIL}/install ${WRKSRC_QMAIL}/dnsfq ${WRKSRC_QMAIL}/hostname \
+		${WRKSRC_QMAIL}/dnsip ${WRKSRC_QMAIL}/ipmeprint ${WRKSRC_QMAIL}/dnsptr
+CONFIGUREFILES=	${WRKSRC_QMAIL}/config ${WRKSRC_QMAIL}/config-fast
+BOOTFILES=	home home+df proc proc+df binm1 binm1+df \
+		binm2 binm2+df binm3 binm3+df maildir maildir+vida
+
+TCPSERVER_DB_DIR=	${PREFIX}/cdb/tcp.smtp.cdb
+.if (${PREFIX} != ${LOCALBASE})
+DOCSDIR=	${PREFIX}/doc
+.endif
+
+NO_MTREE=	yes
+USE_REINPLACE=	yes
+
+OPTIONS+=	QMAILQUEUE_PATCH "run a QMAILQUEUE program" off
+OPTIONS+=	BIG_CONCURRENCY_PATCH "use a concurrency greater than 240" off
+OPTIONS+=	OUTGOINGIP_PATCH "set the IP address to send messages" off
+OPTIONS+=	LOCALTIME_PATCH "emit dates in the local timezone" off
+OPTIONS+=	MAILDIRQUOTA_PATCH "Maildir++ support" off
+OPTIONS+=	BLOCKEXEC_PATCH "block many windows viruses/worms" off
+OPTIONS+=	DISCBOUNCES_PATCH "discard double-bounces" off
+OPTIONS+=	RELAY_REJECT_PATCH "generated by so-called anti-spammers" off
+OPTIONS+=	RCDLINK "create rc.d/qmail.sh" on
+OPTIONS+=	TCPSERVER_MAN "install tcpserver man pages" on
+
+.include <bsd.port.pre.mk>
+
+MAN1_QMAIL=	forward.1 condredirect.1 bouncesaying.1 except.1 maildirmake.1 \
+	maildir2mbox.1 maildirwatch.1 mailsubj.1 qreceipt.1 qbiff.1 preline.1 \
+	tcp-env.1
+MAN5_QMAIL=	addresses.5 envelopes.5 maildir.5 mbox.5 dot-qmail.5 qmail-control.5 \
+	qmail-header.5 qmail-log.5 qmail-users.5 tcp-environ.5
+MAN7_QMAIL=	forgeries.7 qmail-limits.7 qmail.7
+MAN8_QMAIL=	qmail-local.8 qmail-lspawn.8 qmail-getpw.8 qmail-remote.8 \
+	qmail-rspawn.8 qmail-clean.8 qmail-send.8 qmail-start.8 splogger.8 \
+	qmail-queue.8 qmail-inject.8 qmail-showctl.8 qmail-newmrh.8 \
+	qmail-newu.8 qmail-pw2u.8 qmail-qread.8 qmail-qstat.8 qmail-tcpok.8 \
+	qmail-tcpto.8 qmail-pop3d.8 qmail-popup.8 qmail-qmqpc.8 qmail-qmqpd.8 \
+	qmail-qmtpd.8 qmail-smtpd.8 qmail-command.8
+.for i in 1 5 7 8
+MAN${i}+=${MAN${i}_QMAIL}
+.endfor
+
+PATCH_SITES+=	${MASTER_SITE_QMAIL}
+PATCH_SITES+=	http://www.ckdhr.com/ckd/:dns
+PATCH_SITES+=	${MASTER_SITE_LOCAL:S/$/:dns/}
+PATCHFILES+=	qmail-103.patch:dns
+PATCH_SITE_SUBDIR+=	lioux/:dns
+PATCH_DIST_STRIP+=	-p1
+
+.if defined(WITH_QMAILQUEUE_PATCH)
+PATCH_SITES+=	${MASTER_SITE_QMAIL}
+PATCHFILES+=	qmailqueue-patch
+.endif
+.if defined(WITH_BIG_CONCURRENCY_PATCH)
+PATCHFILES+=	big-concurrency.patch
+WITH_BIG_CONCURRENCY_PATCH_CONCURRENCY_LIMIT?=	509
+.endif
+.if defined(WITH_OUTGOINGIP_PATCH)
+PATCHFILES+=	outgoingip.patch
+.endif
+.if defined(WITH_LOCALTIME_PATCH)
+PATCH_SITES+=	http://www.alib.jp/files/:localtime
+PATCHFILES+=	qmail-date-localtime.patch:localtime
+.endif
+.if defined(WITH_MAILDIRQUOTA_PATCH)
+PATCH_SITES+=	http://www.alexdupre.com/qmail/:quota
+PATCHFILES+=	qmail-maildir++.patch:quota
+.endif
+.if defined(WITH_BLOCKEXEC_PATCH) && !defined(BARRIER_BLOCKEXEC_PATCH)
+PATCH_SITES+=	http://www.alexdupre.com/qmail/:blockexec
+PATCHFILES+=	qmail-block-executables.patch:blockexec
+.endif
+.if defined(WITH_DISCBOUNCES_PATCH) && !defined(BARRIER_DISCBOUNCES_PATCH)
+PATCH_SITES+=	http://www.alexdupre.com/qmail/:doublebounce
+PATCHFILES+=	qmail-discard-double-bounces.patch:doublebounce
+.endif
+.if defined(WITH_RELAY_REJECT_PATCH)
+PATCH_SITES+=	${MASTER_SITE_QMAIL:S/$/:reject/}
+PATCHFILES+=	qmail-smtpd-relay-reject:reject
+.endif
+.if defined(WITH_RCDLINK)
+PLIST_SUB+=	RCDLINK=""
+RCDLINK=
+.else
+PLIST_SUB+=	RCDLINK="@comment "
+RCDLINK=	\#
+.endif
+
+.if defined(WITH_TCPSERVER_MAN)
+MASTER_SITES+=	http://smarden.org/pape/djb/manpages/:1
+DISTFILES+=	${DISTNAME_TCPSERVER}-man.tar.gz:1
+MAN1_TCPSERVER=addcr.1 argv0.1 date@.1 delcr.1 finger@.1 fixcrio.1 \
+		http@.1 mconnect.1 rblsmtpd.1 recordio.1 tcpcat.1 \
+		tcpclient.1 tcprules.1 tcprulescheck.1 tcpserver.1 who@.1
+MAN1+=${MAN1_TCPSERVER}
+.endif
+
+pre-everything::
+.if !defined(BARRIER_BIG_CONCURRENCY_PATCH)
+	@${ECHO_MSG} ""
+	@${ECHO_MSG} "You may use the following build options:"
+	@${ECHO_MSG} ""
+	@${ECHO_MSG} "WITH_BIG_CONCURRENCY_PATCH_CONCURRENCY_LIMIT=NUMBER"
+	@${ECHO_MSG} "				(default NUMBER=${WITH_BIG_CONCURRENCY_PATCH_CONCURRENCY_LIMIT})"
+	@${ECHO_MSG} "				set this to a value reasonable for"
+	@${ECHO_MSG} "				your system if you use the patch"
+	@${ECHO_MSG} ""
+.endif
+
+pre-patch:
+	cd ${WRKSRC} && make patch
+
+post-patch:
+	@${REINPLACE_CMD} 's!/var/qmail!${PREFIX}!; \
+			   s!/usr/local/!${LOCALBASE}/!' \
+		${WRKSRC_QMAIL}/Makefile
+	@${REINPLACE_CMD} 's!nofiles!qnofiles!g' \
+		${WRKSRC_QMAIL}/conf-groups
+	@${REINPLACE_CMD} '/"man"/d; /man\/man/d; /man\/cat/d; \
+			   /"doc"/d; /"boot","/d' \
+		${WRKSRC_QMAIL}/hier.c
+	cd ${WRKSRC} && make copy
+
+do-configure:
+	@${SED} -e 's,%%RCDLINK%%,${RCDLINK},g; s,%%LOCALBASE%%,${LOCALBASE},g' \
+		${FILESDIR}/pkg-install.in > ${WRKDIR}/pkg-install
+	@${SETENV} PKG_PREFIX="${PREFIX}" ${CSH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL
+	@${ECHO_CMD} "${CC} ${CFLAGS}" > ${WRKSRC_QMAIL}/conf-cc
+	@${ECHO_CMD} ${PREFIX} > ${WRKSRC_QMAIL}/conf-qmail
+.if defined(WITH_BIG_CONCURRENCY_PATCH) && defined(WITH_BIG_CONCURRENCY_PATCH_CONCURRENCY_LIMIT)
+	@if [ ${WITH_BIG_CONCURRENCY_PATCH_CONCURRENCY_LIMIT} -gt 0 ]; then \
+		${ECHO_CMD} "${WITH_BIG_CONCURRENCY_PATCH_CONCURRENCY_LIMIT}" \
+			> ${WRKSRC_QMAIL}/conf-spawn ; \
+	fi
+.endif
+	@${ECHO_CMD} 'qnofiles' > ${WRKSRC_CHECKPASSWORD}/conf-groups
+	@${ECHO_CMD} 'cc -s -lcrypt' > ${WRKSRC_CHECKPASSWORD}/conf-ld
+	@${ECHO_CMD} ${PREFIX} >${WRKSRC_CHECKPASSWORD}/conf-home
+	@${ECHO_CMD} "${CC} ${CFLAGS}" > ${WRKSRC}/src/vida/conf-cc
+	@${ECHO_CMD} ${PREFIX} > ${WRKSRC}/src/vida/conf-home
+	@${ECHO_CMD} ${PREFIX} > ${WRKSRC}/src/vida/conf-qmailhome
+
+post-configure:
+	@${ECHO_CMD} ${PREFIX} > ${WRKSRC_TCPSERVER}/conf-home
+	@${ECHO_CMD} ${CC} ${CFLAGS} > ${WRKSRC_TCPSERVER}/conf-cc
+	@${ECHO_CMD} ${CC} -s > ${WRKSRC_TCPSERVER}/conf-ld
+
+do-build:
+	@${ECHO_CMD} "=>Building" ${DISTNAME_QMAIL}
+.for target in ${ALL_TARGET_QMAIL}
+	@cd ${WRKSRC_QMAIL} && make ${target}
+.endfor
+	@${ECHO_CMD} "=>Building" ${DISTNAME_CHECKPASSWORD}
+.for target in ${ALL_TARGET_CHECKPASSWORD}
+	@cd ${WRKSRC_CHECKPASSWORD} && make ${target}
+.endfor
+	@${ECHO_CMD} "=>Building" ${DISTNAME_TCPSERVER}
+.for target in ${ALL_TARGET_TCPSERVER}
+	@cd ${WRKSRC_TCPSERVER} && make ${target}
+.endfor
+
+do-install:
+.for i in ${BOOTFILES}
+	@if  [ -f ${WRKSRC_QMAIL}/${i}.sh ] ; then \
+		${SED} -f ${WRKDIR}/bootfiles.sed ${WRKSRC_QMAIL}/$i.sh > ${WRKDIR}/${i} ; \
+	elif [ -f ${FILESDIR}/${i}.in ] ; then \
+		${SED} -e 's,%%PREFIX%%,${PREFIX},g ; s,%%TCPSERVERDB%%,${TCPSERVER_DB_DIR},g' ${FILESDIR}/$i.in > ${WRKDIR}/${i} ; \
+	elif [ -f ${FILESDIR}/${i} ] ; then \
+		${SED} -f ${WRKDIR}/bootfiles.sed ${FILESDIR}/$i > ${WRKDIR}/${i} ; \
+	fi
+.endfor
+	@${MKDIR} ${PREFIX}/configure
+	@cd ${WRKSRC_QMAIL} ; ./install
+	${INSTALL_PROGRAM} ${CONFIGUREPROGS} ${PREFIX}/configure
+	${INSTALL_SCRIPT} ${CONFIGUREFILES} ${PREFIX}/configure
+.for i in ${BOOTFILES}
+	${INSTALL_SCRIPT} ${WRKDIR}/${i:T} ${PREFIX}/boot
+.endfor
+.for i in 1 5 7 8
+	@${MKDIR} ${PREFIX}/man/man$i
+.for j in ${MAN${i}_QMAIL}
+	${INSTALL_MAN} ${WRKSRC_QMAIL}/$j ${PREFIX}/man/man${i}
+.endfor
+.endfor
+.if !defined(NOPORTDOCS)
+	@${MKDIR} ${DOCSDIR}
+	${INSTALL_DATA} ${DOCFILES} ${DOCSDIR}
+.  if defined(PACKAGE_BUILDING)
+	@${ECHO_CMD} "FreeBSD Binary package qmail installation" \
+		> ${DOCSDIR}/SYSDEPS
+.  else
+	@cd ${WRKSRC_QMAIL} && ${CAT} `${CAT} SYSDEPS` \
+		> ${DOCSDIR}/SYSDEPS
+.  endif
+.endif
+	@${MKDIR} ${PREFIX}/scripts
+	${INSTALL_SCRIPT} ${FILESDIR}/mkaliasdir ${PREFIX}/scripts
+	${INSTALL_SCRIPT} ${WRKDIR}/enable-qmail ${PREFIX}/scripts
+.for script in ${SCRIPTS}
+	${INSTALL_SCRIPT} ${WRKDIR}/scripts/${script} ${PREFIX}/scripts
+.endfor
+	@${SETENV} PKG_PREFIX="${PREFIX}" ${CSH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL
+	@${ECHO_CMD}
+	@${CAT} ${PKGMESSAGE}
+	@${ECHO_CMD}
+	@cd ${WRKSRC_CHECKPASSWORD} && make setup
+.for file_name in addcr argv0 delcr fixcrio mconnect-io rblsmtpd recordio tcpclient tcprules tcprulescheck tcpserver
+	@${INSTALL_PROGRAM} ${WRKSRC_TCPSERVER}/${file_name} ${PREFIX}/bin
+.endfor
+.for file_name in date@ finger@ http@ mconnect who@ tcpcat
+	@${INSTALL_SCRIPT} ${WRKSRC_TCPSERVER}/${file_name} ${PREFIX}/bin
+.endfor
+
+.if defined(WITH_TCPSERVER_MAN)
+.for j in ${MAN1_TCPSERVER}
+	${INSTALL_MAN} ${WRKSRC_TCPSERVER}-man/${j} ${PREFIX}/man/man1/
+.endfor
+.endif
+	cd ${WRKSRC}/src/vida && make setup
+	cd ${WRKSRC} && make install-doc
+
+post-install:
+.if !defined(NOPORTDOCS)
+	@${MKDIR} ${DOCSDIR}/checkpassword
+. for f in CHANGES FILES README SYSDEPS TARGETS TODO VERSION
+	${INSTALL_DATA} ${WRKSRC_CHECKPASSWORD}/$f ${DOCSDIR}/checkpassword
+. endfor
+.endif
+	cd ${WRKSRC}/src/vida && make check
+
+.include <bsd.port.post.mk>
diff --git a/mail/qmail-vida/distinfo b/mail/qmail-vida/distinfo
new file mode 100644
index 000000000000..d7973b894329
--- /dev/null
+++ b/mail/qmail-vida/distinfo
@@ -0,0 +1,28 @@
+MD5 (qmail-vida/qmail-1.03.tar.gz) = 622f65f982e380dbe86e6574f3abcb7c
+SIZE (qmail-vida/qmail-1.03.tar.gz) = 220668
+MD5 (qmail-vida/qmail-103.patch) = 9140ad2b03017145cd7963c84bb24f16
+SIZE (qmail-vida/qmail-103.patch) = 2104
+MD5 (qmail-vida/qmail-date-localtime.patch) = d566e8bd99b33efee0194e855b8d6995
+SIZE (qmail-vida/qmail-date-localtime.patch) = 2603
+MD5 (qmail-vida/qmail-vida-0.53.tar.gz) = b86912b63e2538351f021db7624ba199
+SIZE (qmail-vida/qmail-vida-0.53.tar.gz) = 73484
+MD5 (qmail-vida/qmail-smtpd-relay-reject) = 24fc1a33089faf12e00b127cd659f317
+SIZE (qmail-vida/qmail-smtpd-relay-reject) = 1230
+MD5 (qmail-vida/qmailqueue-patch) = 5a8d7a5863b0c56236af945dedd45754
+SIZE (qmail-vida/qmailqueue-patch) = 2510
+MD5 (qmail-vida/checkpassword-0.90.tar.gz) = e75842e908f96571ae56c3da499ba1fc
+SIZE (qmail-vida/checkpassword-0.90.tar.gz) = 15631
+MD5 (qmail-vida/ucspi-tcp-0.88.tar.gz) = 39b619147db54687c4a583a7a94c9163
+SIZE (qmail-vida/ucspi-tcp-0.88.tar.gz) = 53019
+MD5 (qmail-vida/ucspi-tcp-0.88-man.tar.gz) = d33160cbd43bccbc0963d0499dfcebdb
+SIZE (qmail-vida/ucspi-tcp-0.88-man.tar.gz) = 7562
+MD5 (qmail-vida/qmail-maildir++.patch) = fd92b624ac1129a656eb1e567d1f0409
+SIZE (qmail-vida/qmail-maildir++.patch) = 38088
+MD5 (qmail-vida/big-concurrency.patch) = 2ff58c3570870a8ff9a1d9eb9aec05a6
+SIZE (qmail-vida/big-concurrency.patch) = 9331
+MD5 (qmail-vida/outgoingip.patch) = 3c9277dcf5f9b4b6d3a270fb3abf7994
+SIZE (qmail-vida/outgoingip.patch) = 6839
+MD5 (qmail-vida/qmail-block-executables.patch) = e425b420e5251b4882fc699f7822f7a0
+SIZE (qmail-vida/qmail-block-executables.patch) = 5070
+MD5 (qmail-vida/qmail-discard-double-bounces.patch) = 55d45bb8d2c3822a0e3544058aa5a3a3
+SIZE (qmail-vida/qmail-discard-double-bounces.patch) = 1305
diff --git a/mail/qmail-vida/files/PORT_NOTES b/mail/qmail-vida/files/PORT_NOTES
new file mode 100644
index 000000000000..07844f9cf5db
--- /dev/null
+++ b/mail/qmail-vida/files/PORT_NOTES
@@ -0,0 +1,125 @@
+This text was originally taken from the qmail INSTALL file that you
+will find in /var/qmail/doc/.  In addition to INSTALL, there are many
+other potentially important qmail documents there.
+
+As with all ports, the ports maintainer (me!) makes NO WARRANTIES of
+any kind: expressed, implied, or other; about the reliability or
+security of this package.  Any damage or problems derived from its
+usage or related to it are neither my responsibility nor the software
+author's.  This package is provided AS IS.
+
+Although I am probably sounding cold and harsh, believe me: qmail is
+one of the most reliable and easy-to-use softwares around.  However,
+this also is NOT a WARRANTY.  It is just an opinion.  :)
+
+The qmail port will normally install into /var/qmail/.  If you changed
+this to /usr/local/, then please note that the docs have been
+installed into /usr/local/share/doc/qmail/ (as opposed to
+/usr/local/doc/).
+
+If you wish to rerun the automatic configuration utility, do:
+
+# cd /var/qmail/configure ; ./config
+
+If you are upgrading from a previous version of qmail, you should read
+/var/qmail/doc/UPGRADE and follow all the steps after #6.
+
+
+[from /var/qmail/doc/INSTALL]
+
+SAVE COPIES OF YOUR OUTGOING MAIL! Like any other piece of software (and
+information generally), the qmail system comes with NO WARRANTY. It's
+much more secure and reliable than sendmail, but that's not saying much.
+
+[pre-build instructions elided]
+
+To create /var/qmail and configure qmail (won't interfere with sendmail):
+
+[#1 - #3 elided]
+
+ 4. Read INSTALL.ctl and FAQ. Minimal survival command:
+       # ./config
+
+[The "minimal" command has already been performed.]
+
+ 5. Read INSTALL.alias. Minimal survival command:
+       # (cd ~alias; touch .qmail-postmaster .qmail-mailer-daemon .qmail-root)
+       # chmod 644 ~alias/.qmail*
+
+[The "minimal" command has already been performed.]
+
+ 6. Read INSTALL.mbox and INSTALL.vsm.
+
+ 7. Read INSTALL.maildir.
+
+ 8. Copy /var/qmail/boot/home (or proc) to /var/qmail/rc.
+
+[When you do this, qmail will be started automatically the next time
+ you boot.  This is because the command
+ ``ln -s /var/qmail/rc /usr/local/etc/rc.d'' has been executed.  There
+ is a number of sample bootfiles provided.  Not all of them will work.]
+
+To test qmail deliveries (won't interfere with sendmail):
+
+ 9. Enable deliveries of messages injected into qmail:
+       # csh -cf '/var/qmail/rc &'
+
+10. Read TEST.deliver.
+
+
+To upgrade from sendmail to qmail:
+
+11. Read SENDMAIL. This is what your users will want to know about the
+    switch from sendmail to qmail.
+
+12. Read REMOVE.sendmail. You must remove sendmail before installing
+    qmail.
+
+[Do not disable sendmail as instructed in REMOVE.sendmail step #1.
+ Instead, change the sendmail_enable line in /etc/rc.conf to read
+
+        sendmail_enable="NO"
+
+ If you are running a FreeBSD 4.0-RELEASE or later, read
+ PORT_NOTES_FreeBSD_40-RELEASE before executing step 12.
+ ]
+
+13. Read REMOVE.binmail.
+
+14. Add
+            csh -cf '/var/qmail/rc &'
+    to your boot scripts, so that the qmail daemons are restarted
+    whenever your system reboots. Make sure you include the &.
+
+[Do not do this.  Unless you remove the symlink
+ /usr/local/etc/rc.d/qmail.sh, the script /var/qmail/rc will be run
+ everytime you boot.  See also "local_startup" in /etc/rc.conf.]
+
+15. Make qmail's ``sendmail'' wrapper available to MUAs:
+       # ln -s /var/qmail/bin/sendmail /usr/lib/sendmail
+       # ln -s /var/qmail/bin/sendmail /usr/sbin/sendmail
+    /usr/sbin might not exist on your system.
+
+16. Set up qmail-smtpd in /etc/inetd.conf (all on one line):
+            smtp stream tcp nowait qmaild /var/qmail/bin/tcp-env
+            tcp-env /var/qmail/bin/qmail-smtpd
+
+[A freshly-updated /etc/inetd.conf will have a sample qmail entry that
+ you can simply uncomment.]
+
+17. Reboot. (Or kill -HUP your inetd and make sure the qmail daemons
+    are running.)
+
+18. Read TEST.receive.
+
+
+
+That's it! To report success:
+       % ( echo 'First M. Last'; cat /var/qmail/doc/SYSDEPS ) \
+		| mail djb-qst@cr.yp.to
+Replace First M. Last with your name.
+
+[Note that "cat `cat SYSDEPS`" has changed to "cat /var/qmail/doc/SYSDEPS"]
+
+If you have questions about qmail, join the qmail mailing list; see
+http://pobox.com/~djb/qmail.html.
diff --git a/mail/qmail-vida/files/PORT_NOTES_FreeBSD_40-RELEASE b/mail/qmail-vida/files/PORT_NOTES_FreeBSD_40-RELEASE
new file mode 100644
index 000000000000..25963439d603
--- /dev/null
+++ b/mail/qmail-vida/files/PORT_NOTES_FreeBSD_40-RELEASE
@@ -0,0 +1,61 @@
+In addition to PORT_NOTES_FreeBSD_40-RELEASE, there are many
+other potentially important qmail documents there such as PORT_NOTES
+and INSTALL.
+
+As with all ports, the ports maintainer (me!) makes NO WARRANTIES of
+any kind: expressed, implied, or other; about the reliability or
+security of this package.  Any damage or problems derived from its
+usage or related to it are neither my responsibility nor the software
+author's.  This package is provided AS IS.
+
+Although I am probably sounding cold and harsh, believe me: qmail is
+one of the most reliable and easy-to-use softwares around.  However,
+this also is NOT a WARRANTY.  It is just an opinion.  :)
+
+The qmail port will normally install into /var/qmail/.  If you changed
+this to /usr/local/, then please note that the docs have been
+installed into /usr/local/share/doc/qmail/ (as opposed to
+/usr/local/doc/).
+
+##
+### Document starts here
+##
+
+If you read PORT_NOTES, you may have noticed I mentioned step 12 should
+be changed for FreeBSD versions 4.0-Release and later.
+
+FreeBSD 4.0-Release and later come with a program named mailwrapper (8)
+which eases the replacement of sendmail. No binaries need to be touched,
+"chmod"ed, erased, deleted or, otherwise, modified.
+
+Whenever you call /usr/sbin/sendmail, /usr/bin/mail, or /usr/bin/newaliases;
+in fact, you are calling a symbolic link to mailwrapper. Mailwrapper
+then calls the appropriate binary according to its configuration file.
+
+An excerpt from the mailwrapper manual: 
+
+"The mailwrapper program is designed to replace /usr/sbin/sendmail and to
+ invoke an appropriate MTA instead of sendmail(8) based on configuration
+ information placed in /etc/mail/mailer.conf. This permits the administra-
+ tor to configure which MTA is to be invoked on the system at run time."
+
+Configuration for mailwrapper is kept in /etc/mail/mailer.conf.
+
+Here follows my personal /etc/mail/mailer.conf
+
+sendmail        /var/qmail/bin/sendmail
+send-mail       /var/qmail/bin/sendmail
+mailq           /var/qmail/bin/qmail-qread
+newaliases      /var/qmail/bin/newaliases
+
+There is a sample mailer.conf in this directory, please install
+over the /etc/mail/mailer.conf to unfold qmail as your default MTA.
+Please donīt forget to backup /etc/mail/mailer.conf before doing
+so. Better safe then sorry.
+
+So, whenever you call sendmail, in fact, you are using the appropriate
+"qmail-clones".
+
+You should notice, though, that the programs do not behave exactly as
+their sendmail counterparts. Therefore, reading the appropriate
+/var/qmail/doc files and man pages is highly advisable.
diff --git a/mail/qmail-vida/files/bootfiles.sed.in b/mail/qmail-vida/files/bootfiles.sed.in
new file mode 100644
index 000000000000..d2b10a7122b7
--- /dev/null
+++ b/mail/qmail-vida/files/bootfiles.sed.in
@@ -0,0 +1,15 @@
+s!QMAIL/!%%PREFIX%%/!
+s!^\(exec\)!case "\$1" in\
+start)\
+\	\1!
+s!\(qmail\)$!\1\&\
+\	exit 0\
+\	;;\
+stop)\
+\	exec killall qmail-send\
+\	;;\
+*)\
+\	%%ECHO_CMD%% "Usage: `basename \$0` {start|stop}" >\&2\
+\	exit 64\
+\	;;\
+esac!
diff --git a/mail/qmail-vida/files/enable-qmail.in b/mail/qmail-vida/files/enable-qmail.in
new file mode 100644
index 000000000000..a864dd93c97e
--- /dev/null
+++ b/mail/qmail-vida/files/enable-qmail.in
@@ -0,0 +1,86 @@
+#!/bin/sh
+
+disable_sendmail() {
+	echo "===> I hope you know what you are doing:"
+	echo "===> You just told your system to not"
+	echo "===> automaticaly start sendmail on your"
+	echo "===> next startup."
+	echo "===> (i.e., added sendmail_enable=\"NONE\" to rc.conf)"
+
+	if [ -f ${RC_CONF_FILE} ]; then
+		echo sendmail_enable=\"NONE\" >> ${RC_CONF_FILE}
+	fi
+}
+
+enable_qmail() {
+	if [ -f ${MAILER_CONF_FILE} ]; then
+		cp ${MAILER_CONF_FILE} ${MAILER_CONF_FILE}.bak && \
+		cp %%DOCSDIR%%/mailer.conf.sample ${MAILER_CONF_FILE}
+	else
+		echo "===> ERROR: YOU DO NOT HAVE A VALID ${MAILER_CONF_FILE}"
+		echo "===> FIX this and try again"
+		echo "===> or, run \"$0 --force\" if you are sure"
+		echo "===> you want this port replacing some binaries"
+		echo "===> IF THIS FEELS UNEASY, read %%DOCSDIR%%/REMOVE.sendmail and do it manually"
+		echo ""
+		echo "=======> VERY IMPORTANT <======="
+		echo "===> One side issue is that if you do replace them,"
+		echo "===> you really should consider ADDING \"NO_SENDMAIL=true\""
+		echo "===> to your /etc/make.conf if you do \"make world\"."
+		echo "===> Otherwise, \"make world\" will \"fix\" your sendmail"
+		echo "===> installation breaking your qmail one."
+		echo "===> Read the FreeBSD Handbook section on \"make world\""
+		echo "===> if you do not know what I am talking about."
+		echo "===> Check http://www.FreeBSD.org/ for the most"
+		echo "===> updated copy of the Handbook."
+	fi
+	echo "===> Do not forget to choose an appropriate qmail startup"
+	echo "===> script. Go through %%PREFIX%%/boot, choose one"
+	echo "===> and copy the chosen script as %%PREFIX%%/rc"
+	echo "===> For example, \"cp %%PREFIX%%/boot/proc+df %%PREFIX%%/rc\""
+}
+
+# taken from mail/postfix idea
+force_enable_qmail() {
+	echo "===> Replacing sendmail"
+	if [ -e ${SENDMAIL} ]; then
+		mv -f ${SENDMAIL} ${SENDMAIL}.OFF && \
+		chmod 0 ${SENDMAIL}.OFF
+	fi
+	if [ -e %%PREFIX%%/bin/sendmail ]; then
+		ln -sf %%PREFIX%%/bin/sendmail ${SENDMAIL}
+	fi
+
+	echo "===> Replacing mailq"
+	if [ -e ${MAILQ} ]; then
+		mv -f ${MAILQ} ${MAILQ}.OFF && \
+		chmod 0 ${MAILQ}.OFF
+	fi
+	if [ -e %%PREFIX%%/bin/qmail-qread ]; then
+		ln -sf %%PREFIX%%/bin/qmail-qread ${MAILQ}
+	fi
+
+	echo "===> Replacing newaliases"
+	if [ -e ${NEWALIASES} ]; then
+		mv -f ${NEWALIASES} ${NEWALIASES}.OFF && \
+		chmod 0 ${NEWALIASES}.OFF
+	fi
+	if [ -e %%PREFIX%%/bin/newaliases ]; then
+		ln -sf %%PREFIX%%/bin/newaliases ${NEWALIASES}
+	fi
+}
+
+# main
+RC_CONF_FILE=/etc/rc.conf
+MAILER_CONF_FILE=/etc/mail/mailer.conf
+SENDMAIL=/usr/sbin/sendmail
+MAILQ=/usr/bin/mailq
+NEWALIASES=/usr/bin/newaliases
+
+disable_sendmail
+
+if [ "$1" = "--force" ]; then
+  force_enable_qmail
+else
+  enable_qmail
+fi
diff --git a/mail/qmail-vida/files/maildir b/mail/qmail-vida/files/maildir
new file mode 100644
index 000000000000..a11543bcdf7a
--- /dev/null
+++ b/mail/qmail-vida/files/maildir
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+# Using splogger to send the log through syslog.
+# Using qmail-local to deliver messages to Maildir format by default
+
+exec env - PATH="QMAIL/bin:$PATH" \
+qmail-start ./Maildir/ \
+splogger qmail
diff --git a/mail/qmail-vida/files/maildir+vida.in b/mail/qmail-vida/files/maildir+vida.in
new file mode 100644
index 000000000000..caedd26c9989
--- /dev/null
+++ b/mail/qmail-vida/files/maildir+vida.in
@@ -0,0 +1,19 @@
+#!/bin/sh
+
+# Using splogger to send the log through syslog.
+# Using qmail-local to deliver messages to Maildir format by default
+# Using tcpserver and checkpassword
+
+exec env - PATH="%%PREFIX%%/bin:$PATH" \
+qmail-start ./Maildir/ \
+splogger qmail &
+
+exec env - PATH="%%PREFIX%%/bin:$PATH" \
+tcpserver -vHR -x %%TCPSERVERDB%% -c 40 0 \
+smtp qmail-smtpup $HOST checkpassword qmail-smtpd 2>&1 | \
+%%PREFIX%%/bin/splogger smtpd 4 &
+
+exec env - PATH="%%PREFIX%%/bin:$PATH" \
+tcpserver -vHR -x %%TCPSERVERDB%% 0 \
+pop3 qmail-popup $HOST checkpassword qmail-pop3d Maildir 2>&1 | \
+%%PREFIX%%/bin/splogger pop3d 4 &
diff --git a/mail/qmail-vida/files/mailer.conf.sample.in b/mail/qmail-vida/files/mailer.conf.sample.in
new file mode 100644
index 000000000000..08a3ceb57ce7
--- /dev/null
+++ b/mail/qmail-vida/files/mailer.conf.sample.in
@@ -0,0 +1,10 @@
+# Configuration for mailwrapper is kept in /etc/mail/mailer.conf.
+# Replace that file with this one to enable qmail under a sendmail
+# disguise. Very useful.
+
+sendmail	%%PREFIX%%/bin/sendmail
+send-mail	%%PREFIX%%/bin/sendmail
+mailq		%%PREFIX%%/bin/qmail-qread
+newaliases	%%PREFIX%%/bin/newaliases
+hoststat	%%PREFIX%%/bin/qmail-tcpto
+purgestat	%%PREFIX%%/bin/qmail-tcpok
diff --git a/mail/qmail-vida/files/mkaliasdir b/mail/qmail-vida/files/mkaliasdir
new file mode 100644
index 000000000000..fab410af6370
--- /dev/null
+++ b/mail/qmail-vida/files/mkaliasdir
@@ -0,0 +1,109 @@
+#!/usr/bin/perl
+#
+#  Script to populate a Qmail ~alias directory with entries from
+#  an [SZ]mail{er} or sendmail-like aliases file
+#
+# $FreeBSD: /tmp/pcvs/ports/mail/qmail-vida/files/Attic/mkaliasdir,v 1.1 2005-08-30 14:44:26 garga Exp $
+#
+#  Dan Cross <tenser@spitfire.ecsel.psu.edu>
+#
+
+require 'getopts.pl';
+
+$ALIASES = "/etc/aliases";
+
+die "$0 must be run as root!\n" if ($< != 0);
+
+do Getopts('vf:');
+
+$verbose = 0 unless ($verbose = $opt_v);
+$aliases = $ALIASES unless ($aliases = $opt_f);
+
+if (($aliasdir = (getpwnam("qalias"))[7]) eq "")
+{
+	die "User qalias does not exist, bailing!\n";
+}
+
+if (($qmaildir = (getpwnam("qmaild"))[7]) eq "")
+{
+	die "User qmaild does not exist, bailing!\n";
+}
+
+$ME = "$qmaildir/control/me";
+
+die "Error opening $ME: $!\n" unless open(ME, "$ME");
+chop($me = <ME>);
+close (ME);
+
+die "Error opening $aliases: $!\n" unless open(ALIASES, "$aliases");
+
+while (<ALIASES>)
+{
+	chop;
+
+	$mode = ">";
+
+	s/#.*$//;
+
+	($target, $data) = split(/:/, $_, 2);
+
+	$data =~ s/^\s+//;
+	$data =~ s/\s+$//;
+
+	next if (/^$/);
+
+	if ($data =~ /^$/)
+	{
+		while (chop($data = <ALIASES>))
+		{
+			$data =~ s/^\s+//;
+			$data =~ s/\s+$//;
+
+			last if ($data !~ /^$/);
+		}
+	}
+
+	$f = "$aliasdir/.qmail-$target";
+
+	@data = split(/\,/, $data);
+	$datum = $data[0];
+
+	if ($datum =~ /^:include:/i)
+	{
+		$datum =~ s/^:include://i;
+		$verbose && print "Symlinking $f to $datum...\n";
+		symlink($datum, $f);
+		shift(@data);
+		$f = $datum;
+		$mode = ">>";
+	}
+
+	open(ALIAS, "$mode$f") || die "Error creating $f: $!\n";
+
+	$verbose && print "Creating $f...\n";
+
+	foreach $datum (@data)
+	{
+		$datum =~ s/"$// if ($datum =~ s/^"// ||
+					$datum =~ s/^\|[ \t]*"/|/);
+
+		if ($datum =~ /^[|\/]/)
+		{
+			print ALIAS $datum, "\n";
+		}
+		else
+		{
+			$datum = "&" . $datum;
+			$datum .= "\@$me" unless ($datum =~ /\@/);
+			print ALIAS "$datum\n";
+		}
+
+		$verbose && print "\tPopulating $f with $datum...\n";
+	}
+
+	close(ALIAS);
+}
+
+close(ALIASES);
+
+exit 0;
diff --git a/mail/qmail-vida/files/patch-install.c b/mail/qmail-vida/files/patch-install.c
new file mode 100644
index 000000000000..97780f9f61fd
--- /dev/null
+++ b/mail/qmail-vida/files/patch-install.c
@@ -0,0 +1,37 @@
+--- install.c.orig	Mon Jun 15 07:53:16 1998
++++ install.c	Fri May  6 09:30:15 2005
+@@ -10,6 +10,7 @@
+ #define FATAL "install: fatal: "
+ 
+ int fdsourcedir = -1;
++noc;  /* hack for bin package install -- see port pkg/INSTALL */
+ 
+ void h(home,uid,gid,mode)
+ char *home;
+@@ -75,6 +76,7 @@
+ int gid;
+ int mode;
+ {
++ if (!noc) {
+   int fdin;
+   int fdout;
+ 
+@@ -115,6 +117,7 @@
+     strerr_die6sys(111,FATAL,"unable to chown .../",subdir,"/",file,": ");
+   if (chmod(file,mode) == -1)
+     strerr_die6sys(111,FATAL,"unable to chmod .../",subdir,"/",file,": ");
++ }
+ }
+ 
+ void z(home,file,len,uid,gid,mode)
+@@ -152,8 +155,9 @@
+     strerr_die6sys(111,FATAL,"unable to chmod ",home,"/",file,": ");
+ }
+ 
+-void main()
++void main(argc, argv)
+ {
++  noc=--argc;
+   fdsourcedir = open_read(".");
+   if (fdsourcedir == -1)
+     strerr_die2sys(111,FATAL,"unable to open current directory: ");
diff --git a/mail/qmail-vida/files/patch-qmail-local.c b/mail/qmail-vida/files/patch-qmail-local.c
new file mode 100644
index 000000000000..ee0709db5b8f
--- /dev/null
+++ b/mail/qmail-vida/files/patch-qmail-local.c
@@ -0,0 +1,11 @@
+--- qmail-local.c.orig	Sun Nov 23 18:30:43 2003
++++ qmail-local.c	Sun Nov 23 18:31:31 2003
+@@ -645,7 +645,7 @@
+     {
+      cmds.s[j] = 0;
+      k = j;
+-     while ((k > i) && (cmds.s[k - 1] == ' ') || (cmds.s[k - 1] == '\t'))
++     while ((k > i) && ((cmds.s[k - 1] == ' ') || (cmds.s[k - 1] == '\t')))
+        cmds.s[--k] = 0;
+      switch(cmds.s[i])
+       {
diff --git a/mail/qmail-vida/files/pkg-install.in b/mail/qmail-vida/files/pkg-install.in
new file mode 100644
index 000000000000..e7c09c48855c
--- /dev/null
+++ b/mail/qmail-vida/files/pkg-install.in
@@ -0,0 +1,114 @@
+#!/bin/csh -f
+#
+# $FreeBSD: /tmp/pcvs/ports/mail/qmail-vida/files/Attic/pkg-install.in,v 1.1 2005-08-30 14:44:26 garga Exp $
+#
+
+# Author : Marcos Tischer Vallim
+# E-Mail : tischer@gmail.com
+# Date   : Tue Mar 22 00:40:45 BRT 2005
+
+set path = ( /bin /sbin /usr/bin /usr/sbin )
+
+if ($uid != 0) then
+	echo "It is necessary to add missing qmail users/groups at";
+	echo "this stage.  Please either add them manually or retry";
+	echo "as root.";
+	exit 1;
+endif
+
+if (! -x `which pw`) then
+	echo "This system looks like a pre-2.2 version of FreeBSD.  We see that it";
+	echo "is missing the "pw" utility.  We need this utility.  Please get and";
+	echo "install it, and try again.  You can get the source from:";
+	echo "";
+	echo "  ftp://ftp.freebsd.org/pub/FreeBSD/FreeBSD-current/src/usr.sbin/pw.tar.gz";
+	echo "";
+	echo "No pw";
+	exit 1;
+endif
+
+switch ($argv[2])
+
+case "PRE-INSTALL":
+	set groups  = (vida qmail qnofiles);
+	set gids    = (83 82 81);
+	set users   = (alias qmaild qmaill qmailp qmailq qmailr qmails qmailu authdb);
+	set users_g = (qnofiles qnofiles qnofiles qnofiles qmail qmail qmail vida vida);
+	set uids    = (81 82 83 84 85 86 87 90 91);
+
+
+	set k = 1;
+	foreach group ($groups)
+		pw groupshow $group >& /dev/null;
+	
+		if ($status) then
+			pw groupadd $group -g $gids[$k];
+	
+			if ($status) then
+				echo "Failed to add group '$group' as gid '$gids[$k]'";
+				exit 1;
+			endif
+		endif
+	
+		set chkgid = (`pw groupshow $group | sed -e "s,:, ,g"`); 
+		if ($chkgid[3] != $gids[$k]) then
+			echo "Group '$group' should have gid '$gids[$k]'";
+			exit 1;
+		endif
+	
+		@ k++;
+	end
+	
+	set k = 1;
+	foreach user ($users)
+		pw usershow $user >& /dev/null;
+	
+		if ($status) then
+			if ($user == "alias") then
+				set home = ${PKG_PREFIX}/alias;
+			else
+				set home = ${PKG_PREFIX};
+			endif
+	
+			pw useradd $user -g $users_g[$k] -d $home -s /nonexistent -u $uids[$k];
+	
+			if ($status) then
+				echo "Failed to add user '$user' as uid '$uids[$k]'";
+				exit 1;
+			endif
+		endif
+	
+		set chkuid = (`pw usershow $user | sed -e "s,:, ,g"`); 
+		if ($chkuid[3] != $uids[$k]) then
+			echo "User '$user' should have uid '$uids[$k]'";
+			exit 1;
+		endif
+	
+		@ k++;
+	end
+
+	breaksw;
+
+case "POST-INSTALL":
+	${PKG_PREFIX}/configure/install x;
+
+	if ( ! `filetest -e ${PKG_PREFIX}/control/me` ) then
+		cd ${PKG_PREFIX}/configure && ./config;
+	endif
+
+	%%RCDLINK%%ln -s ${PKG_PREFIX}/rc %%LOCALBASE%%/etc/rc.d/qmail.sh;
+
+	touch ${PKG_PREFIX}/alias/.qmail-{postmaster,root,mailer-daemon};
+
+	if ($status) then
+		echo "Failed to create files :";
+		echo "  ${PKG_PREFIX}/alias/.qmail-postmaster";
+		echo "  ${PKG_PREFIX}/alias/.qmail-root";
+		echo "  ${PKG_PREFIX}/alias/.qmail-mailer-daemon";
+		exit 1;
+	endif
+
+	breaksw;
+endsw
+
+exit 0;
diff --git a/mail/qmail-vida/files/pkg-message-ldap.in b/mail/qmail-vida/files/pkg-message-ldap.in
new file mode 100644
index 000000000000..56272ff24640
--- /dev/null
+++ b/mail/qmail-vida/files/pkg-message-ldap.in
@@ -0,0 +1,35 @@
+	ATTENTION:
+
+Please make sure that you read %%PREFIX%%/doc/PORT_NOTES.
+It contains important information about testing and configuring
+qmail, and finally replacing sendmail with qmail.
+
+You should also add %%PREFIX%%/man to your MANPATH (see manpath(1)
+or login.conf(5)).
+
+Do not forget to read %%PREFIX%%/doc/QLDAPINSTALL. After all,
+this is NOT our old stock qmail. And, %%PREFIX%%/doc/ANTISPAM
+for some antispam control measures.
+
+The qmail.schema file was copied to %%DOCSDIR%%. Remember
+to copy it to ldap's schema directory
+
+You can enable qmail as your default mailer executing:
+> %%PREFIX%%/scripts/enable-qmail
+
+=====><=====
+
+If you've built this port with TLS support (WITH_TLS=yes)
+
+==> You will need to provide a working certificate in %%PREFIX%%/control/cert.pem :
+
+# makes a self-signed certificate
+3) do "make certificate"
+
+# makes a certificate request
+4) do "make certificate-req"
+
+=====><=====
+
+Now, you need to use it. Check a little FreeBSD specific how-to at
+http://freebsd.cg.nu/postfixqmail-ldap.html
diff --git a/mail/qmail-vida/files/pkg-message-smtp_auth+tls.in b/mail/qmail-vida/files/pkg-message-smtp_auth+tls.in
new file mode 100644
index 000000000000..b833bab4dd99
--- /dev/null
+++ b/mail/qmail-vida/files/pkg-message-smtp_auth+tls.in
@@ -0,0 +1,23 @@
+	ATTENTION:
+
+Please make sure that you read %%PREFIX%%/doc/PORT_NOTES.
+It contains important information about testing and configuring
+qmail, and finally replacing sendmail with qmail.
+
+You should also add %%PREFIX%%/man to your MANPATH (see manpath(1)
+or login.conf(5)).
+
+Do not forget to read both %%PREFIX%%/doc/SMTP_AUTH+TLS.readme AND
+%%PREFIX%%/doc/README.auth.  After all, this is NOT our old stock
+qmail.
+
+You can enable qmail as your default mailer executing:
+> %%PREFIX%%/scripts/enable-qmail
+
+==> As you need to provide a working certificate in %%PREFIX%%/control/cert.pem :
+
+# makes a self-signed certificate
+3) do "make certificate"
+
+# makes a certificate request
+4) do "make certificate-req"
diff --git a/mail/qmail-vida/files/pkg-message-tls.in b/mail/qmail-vida/files/pkg-message-tls.in
new file mode 100644
index 000000000000..a13b66738e46
--- /dev/null
+++ b/mail/qmail-vida/files/pkg-message-tls.in
@@ -0,0 +1,22 @@
+	ATTENTION:
+
+Please make sure that you read %%PREFIX%%/doc/PORT_NOTES.
+It contains important information about testing and configuring
+qmail, and finally replacing sendmail with qmail.
+
+You should also add %%PREFIX%%/man to your MANPATH (see manpath(1)
+or login.conf(5)).
+
+Do not forget to read %%PREFIX%%/doc/TLS.readme. After all,
+this is NOT our old stock qmail.
+
+You can enable qmail as your default mailer executing:
+> %%PREFIX%%/scripts/enable-qmail
+
+==> As you need to provide a working certificate in %%PREFIX%%/control/cert.pem :
+
+# makes a self-signed certificate
+3) do "make certificate"
+
+# makes a certificate request
+4) do "make certificate-req"
diff --git a/mail/qmail-vida/files/pkg-message.in b/mail/qmail-vida/files/pkg-message.in
new file mode 100644
index 000000000000..f3736f9b333e
--- /dev/null
+++ b/mail/qmail-vida/files/pkg-message.in
@@ -0,0 +1,11 @@
+	ATTENTION:
+
+Please make sure that you read %%PREFIX%%/doc/PORT_NOTES.
+It contains important information about testing and configuring
+qmail, and finally replacing sendmail with qmail.
+
+You should also add %%PREFIX%%/man to your MANPATH (see manpath(1)
+or login.conf(5)).
+
+You can enable qmail as your default mailer executing:
+> %%PREFIX%%/scripts/enable-qmail
diff --git a/mail/qmail-vida/pkg-descr b/mail/qmail-vida/pkg-descr
new file mode 100644
index 000000000000..9dccf7edbcb3
--- /dev/null
+++ b/mail/qmail-vida/pkg-descr
@@ -0,0 +1 @@
+qmail-vida : qmail Virtual Domain and Authentication
diff --git a/mail/qmail-vida/pkg-plist b/mail/qmail-vida/pkg-plist
new file mode 100644
index 000000000000..00ca5d71a223
--- /dev/null
+++ b/mail/qmail-vida/pkg-plist
@@ -0,0 +1,105 @@
+@comment $FreeBSD$
+%%RCDLINK%%@unexec rm -f %%LOCALBASE%%/etc/rc.d/qmail.sh
+bin/qmail-queue
+bin/qmail-lspawn
+bin/qmail-start
+bin/qmail-getpw
+bin/qmail-local
+bin/qmail-remote
+bin/qmail-rspawn
+bin/qmail-clean
+bin/qmail-send
+bin/splogger
+bin/qmail-newu
+bin/qmail-newmrh
+bin/qmail-pw2u
+bin/qmail-inject
+bin/predate
+bin/datemail
+bin/mailsubj
+bin/qmail-showctl
+bin/qmail-qread
+bin/qmail-qstat
+bin/qmail-tcpto
+bin/qmail-tcpok
+bin/qmail-pop3d
+bin/qmail-popup
+bin/qmail-qmqpc
+bin/qmail-qmqpd
+bin/qmail-qmtpd
+bin/qmail-smtpd
+bin/qmail-smtpup
+bin/sendmail
+bin/tcp-env
+bin/qreceipt
+bin/qsmhook
+bin/qbiff
+bin/forward
+bin/preline
+bin/condredirect
+bin/bouncesaying
+bin/except
+bin/maildirmake
+bin/maildir2mbox
+bin/maildirwatch
+bin/qail
+bin/elq
+bin/pinq
+bin/checkpassword
+bin/addcr
+bin/argv0
+bin/delcr
+bin/fixcrio
+bin/mconnect-io
+bin/rblsmtpd
+bin/recordio
+bin/tcpclient
+bin/tcprules
+bin/tcprulescheck
+bin/tcpserver
+bin/date@
+bin/finger@
+bin/http@
+bin/mconnect
+bin/who@
+bin/tcpcat
+bin/vida-pwdbinit
+bin/vida-pwdbmake
+bin/vida-passwd
+bin/vida-assign
+bin/vida-maildirmake
+boot/home
+boot/home+df
+boot/proc
+boot/proc+df
+boot/binm1
+boot/binm1+df
+boot/binm2
+boot/binm2+df
+boot/binm3
+boot/binm3+df
+boot/maildir
+boot/maildir+vida
+configure/install
+configure/dnsfq
+configure/hostname
+configure/dnsip
+configure/ipmeprint
+configure/dnsptr
+configure/config
+configure/config-fast
+scripts/mkaliasdir
+scripts/enable-qmail
+@dirrm boot
+@dirrm bin
+@dirrm configure
+@dirrm man/man1
+@dirrm man/man5
+@dirrm man/man7
+@dirrm man/man8
+@dirrm man
+@dirrm scripts
+@dirrm users
+@unexec echo "1) If you are permanently removing qmail, you should also ``rm -Rf ${PKG_PREFIX}/alias ${PKG_PREFIX}/control ${PKG_PREFIX}/queue ${PKG_PREFIX}/users'' and remove the qmail and qmail-vida users/groups." | /usr/bin/fmt
+@unexec echo "2) Do not forget to reconfigure your /etc/mail/mailer.conf to use your older MTA, or reconfigure your old MTA binaries if you decided to replace them." | /usr/bin/fmt
+@unexec echo "3) Do not forget to enable sendmail as your default MTA if you have to. You can do it just executing 'echo sendmail_enable=\"YES\" >> /etc/rc.conf" | /usr/bin/fmt