Update to 4.2.13

PR:		25520
Submitted by:	    Orion Hodson <oh@btinternet.com

6 files changed, 43 insertions, 1085 deletions

diff --git a/mbone/rat/Makefile b/mbone/rat/Makefile
index aaba97e148c6..746885541023 100644
--- a/mbone/rat/Makefile
+++ b/mbone/rat/Makefile
@@ -6,10 +6,11 @@
 #
 
 PORTNAME=	rat
-PORTVERSION=	4.2.9
-PORTREVISION=	1
+PORTVERSION=	4.2.13
+
+PORTREVISION=	0
 CATEGORIES=	mbone audio ipv6
-MASTER_SITES=	http://www-mice.cs.ucl.ac.uk/multimedia/software/rat/4.2.9/ \
+MASTER_SITES=	http://www-mice.cs.ucl.ac.uk/multimedia/software/rat/4.2.13/ \
 		${MASTER_SITE_LOCAL}
 MASTER_SITE_SUBDIR=	cpiazza
 
diff --git a/mbone/rat/distinfo b/mbone/rat/distinfo
index a8da8d69316e..1edf6ef3ac6a 100644
--- a/mbone/rat/distinfo
+++ b/mbone/rat/distinfo
@@ -1 +1 @@
-MD5 (rat-4.2.9.tar.gz) = f50915d37cfbd2a90d28342b17a2f4ab
+MD5 (rat-4.2.13.tar.gz) = 6524f9805772e60072de8769aea1945f
diff --git a/mbone/rat/files/patch-aa b/mbone/rat/files/patch-aa
index deb3f511964d..cdec971f5708 100644
--- a/mbone/rat/files/patch-aa
+++ b/mbone/rat/files/patch-aa
@@ -1,941 +1,25 @@
-diff -uPr rat/MODS /home/oh/src/rat-newpcm/rat/MODS
---- rat/MODS	Fri Sep  8 21:02:40 2000
-+++ /home/oh/src/rat-newpcm/rat/MODS	Sat Sep 16 20:33:47 2000
-@@ -1,7 +1,7 @@
- MODIFICATIONS FILE
- ------------------
- 
--$Id: MODS,v 1.225 2000/09/08 19:58:13 ucaccsp Exp $
-+$Id: MODS,v 1.226 2000/09/16 17:43:21 ucacoxh Exp $
- 
- Copyright (C) 1995-2000 University College London
- All rights reserved. 
-@@ -1429,18 +1429,23 @@
- 	- Fix labelling of transcoder input/output ports
- 	* Released 8 September 2000
- 
--
--
--
-+v4.2.9p1 - Added auddev_newpcm.[ch] with newpcm style mixer control.  Includes
-+	  support for loopback and preservation of mixer settings so mixer is
-+	  returned to original state upon exit. [oh]
-+
-+	  Note: both driver interfaces (luigi, newpcm) are pulled in
-+	  by configure and this is possible whilst luigi pcm and
-+	  newpcm maintain the same function call interface.  This may
-+	  break in future.  Both are necessary because mixer operation
-+	  is not consistent between the two interfaces.
- 
- TODO -- They're features not bugs dammit!
- ----
- 
- - Assorted audio driver problems:
--	- FreeBSD driver bug on SoundBlaster 16 has small write buffers 
-+	- Luigi pcm driver bug on SoundBlaster 16 has small write buffers 
- 	  and stops working full duplex mode after a time.  Hard to fix because
- 	  of cushion.
--	- Loopback support is broken on FreeBSD newpcm driver.
- 	- Broken auddev_pca with adding of audio interface conversion code.
- 	  FreeBSD 3.1 pca audio does not seem to work anymore.
- 	- SunVideoPlus interface code does not work properly.  The driver Sun
-diff -uPr rat/acconfig.h /home/oh/src/rat-newpcm/rat/acconfig.h
---- rat/acconfig.h	Fri Sep  8 21:02:44 2000
-+++ /home/oh/src/rat-newpcm/rat/acconfig.h	Sat Sep 16 20:33:49 2000
-@@ -1,7 +1,7 @@
- /*
-  * Define this if your C library doesn't have usleep.
-  *
-- * $Id: acconfig.h,v 1.10 2000/02/06 22:04:23 ucacoxh Exp $
-+ * $Id: acconfig.h,v 1.11 2000/09/16 17:43:22 ucacoxh Exp $
-  */
- #undef NEED_USLEEP
- #undef NEED_SNPRINTF
-@@ -42,12 +42,15 @@
- #undef HAVE_SGI_AUDIO
- #undef HAVE_PCA_AUDIO
- #undef HAVE_LUIGI_AUDIO
-+#undef HAVE_NEWPCM_AUDIO
- #undef HAVE_OSS_AUDIO
- #undef HAVE_HP_AUDIO
- #undef HAVE_NETBSD_AUDIO
- #undef HAVE_OSPREY_AUDIO
- #undef HAVE_MACHINE_PCAUDIOIO_H
- #undef HAVE_ALSA_AUDIO
-+
-+#undef HAVE_IPv6
- 
- /* GSM related */
- #undef SASR
-diff -uPr rat/auddev.c /home/oh/src/rat-newpcm/rat/auddev.c
---- rat/auddev.c	Fri Sep  8 21:02:44 2000
-+++ /home/oh/src/rat-newpcm/rat/auddev.c	Sat Sep 16 20:33:52 2000
-@@ -9,7 +9,7 @@
-  
- #ifndef HIDE_SOURCE_STRINGS
- static const char cvsid[] = 
--	"$Id: auddev.c,v 1.58 2000/05/08 10:11:40 ucaccsp Exp $";
-+	"$Id: auddev.c,v 1.59 2000/09/16 17:43:22 ucacoxh Exp $";
- #endif /* HIDE_SOURCE_STRINGS */
- 
- #include "config_unix.h"
-@@ -22,6 +22,7 @@
- #include "auddev.h"
- #include "auddev_null.h"
- #include "auddev_luigi.h"
-+#include "auddev_newpcm.h"
- #include "auddev_osprey.h"
- #include "auddev_oss.h"
- #include "auddev_alsa.h"
-@@ -298,6 +299,38 @@
-                 luigi_audio_supports
-         },
- #endif /* HAVE_LUIGI_AUDIO */
-+#ifdef HAVE_NEWPCM_AUDIO
-+        {
-+                newpcm_audio_query_devices,
-+                NULL,
-+                newpcm_get_device_count,
-+                newpcm_get_device_name,
-+                newpcm_audio_open,
-+                newpcm_audio_close,
-+                newpcm_audio_drain,
-+                newpcm_audio_duplex,
-+                newpcm_audio_read,
-+                newpcm_audio_write,
-+                newpcm_audio_non_block,
-+                newpcm_audio_block,
-+                newpcm_audio_set_igain,
-+                newpcm_audio_get_igain,
-+                newpcm_audio_set_ogain,
-+                newpcm_audio_get_ogain,
-+                newpcm_audio_loopback,
-+                newpcm_audio_oport_set,
-+                newpcm_audio_oport_get,
-+                newpcm_audio_oport_details,
-+                newpcm_audio_oport_count,
-+                newpcm_audio_iport_set,
-+                newpcm_audio_iport_get,
-+                newpcm_audio_iport_details,
-+                newpcm_audio_iport_count,
-+                newpcm_audio_is_ready,
-+                newpcm_audio_wait_for,
-+                newpcm_audio_supports
-+        },
-+#endif /* HAVE_NEWPCM_AUDIO */
- #ifdef HAVE_PCA_AUDIO
-         {
-                 pca_audio_init,
-diff -uPr rat/auddev_luigi.c /home/oh/src/rat-newpcm/rat/auddev_luigi.c
---- rat/auddev_luigi.c	Fri Sep  8 21:02:46 2000
-+++ /home/oh/src/rat-newpcm/rat/auddev_luigi.c	Sat Sep 16 20:33:54 2000
-@@ -1,15 +1,13 @@
- /*
-  * FILE: auddev_luigi.c - Sound interface for Luigi Rizzo's FreeBSD driver
-  *
-- * Modified to support newpcm (July 2000).
-- *
-  * Copyright (c) 1996-2000 University College London
-  * All rights reserved.
-  */
-  
- #ifndef HIDE_SOURCE_STRINGS
- static const char cvsid[] = 
--	"$Id: auddev_luigi.c,v 1.51 2000/07/23 10:33:29 ucacoxh Exp $";
-+	"$Id: auddev_luigi.c,v 1.52 2000/09/16 17:43:23 ucacoxh Exp $";
- #endif /* HIDE_SOURCE_STRINGS */
- 
- #include "config_unix.h"
-@@ -51,24 +49,6 @@
- static audio_format *input_format, *output_format, *tmp_format;
- static snd_capabilities soundcaps[LUIGI_MAX_AUDIO_DEVICES];
- 
--/* There are some differences between the FreeBSD 4x newpcm driver 
-- * and Luigi's pcm driver:
-- *
-- * 1) Mixer loopback writes are handled differently (not supported 
-- *    on newpcm yet - new mixer infrastructure looks to be WIP)
-- *
-- * 2) newpcm does not set AFMT_FULLDUPLEX when device caps are queried.
-- *    Luigi's driver does.  Luigi's driver also opens half-duplex devices
-- *    when open() use O_RDWR.  So with Luigi's driver we have to check
-- *    AFMT_FULLDUPLEX, with newpcm we assume if device opens O_RDWR it 
-- *    is full duplex.
-- *
-- * The variable is_newpcm indicates applications understanding of which
-- * driver it is talking to.
-- */
--
--static int is_newpcm; 
--
- int 
- luigi_audio_open(audio_desc_t ad, audio_format *ifmt, audio_format *ofmt)
- {
-@@ -100,16 +80,12 @@
-                 LUIGI_AUDIO_IOCTL(audio_fd,SNDCTL_DSP_RESET,0);
- 
- 		/* Check card is full duplex - need for Luigi driver only */
--		if (is_newpcm == FALSE && 
--		    (soundcaps[ad].formats & AFMT_FULLDUPLEX) == 0) {
-+		if ((soundcaps[ad].formats & AFMT_FULLDUPLEX) == 0) {
- 			     fprintf(stderr, "Sorry driver does support full duplex for this soundcard\n");
- 			     luigi_audio_close(ad);
- 			     return FALSE;
- 		}
- 
--		/* From newpcm source code it looks like AFMT_WEIRD is handled
--		 * by driver interface, but Luigi's driver needs this.
--		 */
- 		if (soundcaps[ad].formats & AFMT_WEIRD) {
-                         /* this is a sb16/32/64... 
-                          * you can change either ifmt or ofmt to U8 
-@@ -556,16 +532,14 @@
-                                 ndev++;
-                         } else if (strstr(buf, "newpcm")) {
- 				/* This is a clunky check for the
--				 * newpcm driver.
-+				 * newpcm driver.  Don't use luigi in this case
- 				 */
--				is_newpcm = TRUE;
-+				ndev = 0;
-+				break;
- 			}
-                 }
-                 fclose(f);
-         }
--
--	debug_msg("Audio driver is %s\n", 
--		  (is_newpcm) ? "newpcm" : "luigi");
- 
-         return (ndev);
- }
-diff -uPr rat/auddev_newpcm.c /home/oh/src/rat-newpcm/rat/auddev_newpcm.c
---- rat/auddev_newpcm.c	Thu Jan  1 01:00:00 1970
-+++ /home/oh/src/rat-newpcm/rat/auddev_newpcm.c	Sat Sep 16 20:33:54 2000
-@@ -0,0 +1,622 @@
-+/*
-+ * FILE: auddev_newpcm.c - Sound interface for newpcm FreeBSD driver.
-+ *
-+ * Modified to support newpcm (July 2000).
-+ *
-+ * Copyright (c) 1996-2000 University College London
-+ * All rights reserved.
-+ */
-+ 
-+#ifndef HIDE_SOURCE_STRINGS
-+static const char cvsid[] = 
-+	"$Id: auddev_newpcm.c,v 1.1 2000/09/16 17:43:23 ucacoxh Exp $";
-+#endif /* HIDE_SOURCE_STRINGS */
-+
-+#include "config_unix.h"
-+#include "config_win32.h"
-+#include "audio_types.h"
-+#include "audio_fmt.h"
-+#include "auddev_newpcm.h"
-+#include "memory.h"
-+#include "debug.h"
-+
-+#include <machine/soundcard.h>
-+
-+static char *port_names[] = SOUND_DEVICE_LABELS;
-+static int  iport, oport, loop;
-+static snd_chan_param pa;
-+static struct snd_size sz;
-+static int audio_fd = -1;
-+
-+#define RAT_TO_DEVICE(x) ((x) * 100 / MAX_AMP)
-+#define DEVICE_TO_RAT(x) ((x) * MAX_AMP / 100)
-+
-+#define NEWPCM_AUDIO_IOCTL(fd, cmd, val) if (ioctl((fd), (cmd), (val)) < 0) { \
-+                                            debug_msg("Failed %s - line %d\n",#cmd, __LINE__); \
-+                                            newpcm_error = __LINE__; \
-+                                               }
-+
-+#define NEWPCM_MAX_AUDIO_NAME_LEN 32
-+#define NEWPCM_MAX_AUDIO_DEVICES  3
-+
-+static int dev_ids[NEWPCM_MAX_AUDIO_DEVICES];
-+static char names[NEWPCM_MAX_AUDIO_DEVICES][NEWPCM_MAX_AUDIO_NAME_LEN];
-+static int ndev = 0;
-+static int newpcm_error;
-+static audio_format *input_format, *output_format, *tmp_format;
-+static snd_capabilities soundcaps[NEWPCM_MAX_AUDIO_DEVICES];
-+
-+static void newpcm_mixer_save(int fd);
-+static void newpcm_mixer_restore(int fd);
-+static void newpcm_mixer_init(int fd);
-+static void newpcm_audio_loopback_config(int gain);
-+
-+int 
-+newpcm_audio_open(audio_desc_t ad, audio_format *ifmt, audio_format *ofmt)
-+{
-+        int32_t         fragment;
-+        char            thedev[64];
-+        
-+        assert(ad >= 0 && ad < ndev); 
-+	sprintf(thedev, "/dev/audio%d", dev_ids[ad]);
-+
-+        debug_msg("Opening %s\n", thedev);
-+
-+        audio_fd = open(thedev, O_RDWR);
-+        if (audio_fd >= 0) {
-+                /* Ignore any earlier errors */
-+                newpcm_error = 0;
-+
-+		newpcm_mixer_save(audio_fd);
-+
-+                NEWPCM_AUDIO_IOCTL(audio_fd, AIOGCAP, &soundcaps[ad]);
-+		debug_msg("soundcaps[%d].rate_min = %d\n", ad, soundcaps[ad].rate_min);
-+		debug_msg("soundcaps[%d].rate_max = %d\n", ad, soundcaps[ad].rate_max);
-+		debug_msg("soundcaps[%d].formats  = 0x%08lx\n", ad, soundcaps[ad].formats);
-+                debug_msg("soundcaps[%d].bufsize  = %d\n", ad, soundcaps[ad].bufsize);
-+		debug_msg("soundcaps[%d].mixers   = 0x%08lx\n", ad, soundcaps[ad].mixers);
-+		debug_msg("soundcaps[%d].inputs   = 0x%08lx\n", ad, soundcaps[ad].inputs);
-+		debug_msg("soundcaps[%d].left     = 0x%04lx\n", ad, soundcaps[ad].left);
-+		debug_msg("soundcaps[%d].right    = 0x%04lx\n", ad, soundcaps[ad].right);
-+
-+                /* Setup input and output format settings */
-+                assert(ofmt->channels == ifmt->channels);
-+                memset(&pa, 0, sizeof(pa));
-+                if (ifmt->channels == 2) {
-+                        if (!soundcaps[ad].formats & AFMT_STEREO) {
-+                                fprintf(stderr,"Driver does not support stereo for this soundcard\n");
-+                                newpcm_audio_close(ad);
-+                                return FALSE;
-+                        }
-+                        pa.rec_format  = AFMT_STEREO;
-+                        pa.play_format = AFMT_STEREO;
-+                }
-+
-+                switch(ifmt->encoding) {
-+                case DEV_PCMU: pa.rec_format |= AFMT_MU_LAW; break;
-+                case DEV_PCMA: pa.rec_format |= AFMT_A_LAW;  break;
-+                case DEV_S8:   pa.rec_format |= AFMT_S8;     break;
-+                case DEV_S16:  pa.rec_format |= AFMT_S16_LE; break;
-+                case DEV_U8:   pa.rec_format |= AFMT_U8;     break;
-+                }
-+
-+                switch(ofmt->encoding) {
-+                case DEV_PCMU: pa.play_format |= AFMT_MU_LAW; break;
-+                case DEV_PCMA: pa.play_format |= AFMT_A_LAW;  break;
-+                case DEV_S8:   pa.play_format |= AFMT_S8;     break;
-+                case DEV_S16:  pa.play_format |= AFMT_S16_LE; break;
-+                case DEV_U8:   pa.play_format |= AFMT_U8;     break;
-+                }
-+                pa.play_rate = ofmt->sample_rate;
-+                pa.rec_rate = ifmt->sample_rate;
-+                NEWPCM_AUDIO_IOCTL(audio_fd, AIOSFMT, &pa);
-+
-+                sz.play_size = ofmt->bytes_per_block;
-+                sz.rec_size  = ifmt->bytes_per_block;
-+                NEWPCM_AUDIO_IOCTL(audio_fd, AIOSSIZE, &sz);
-+
-+                NEWPCM_AUDIO_IOCTL(audio_fd, AIOGSIZE, &sz);
-+                debug_msg("rec size %d, play size %d bytes\n",
-+                          sz.rec_size, sz.play_size);
-+
-+		/* Fragment :  8msb = #frags, 16lsbs = log2 fragsize */
-+		fragment = 0x08000007;
-+		NEWPCM_AUDIO_IOCTL(audio_fd, SNDCTL_DSP_SETFRAGMENT, &fragment);
-+                
-+                if (newpcm_error != 0) {
-+                        /* Failed somewhere in initialization - reset error and exit*/
-+                        newpcm_audio_close(ad);
-+                        newpcm_error = 0;
-+                        return FALSE;
-+                }
-+
-+                /* Store format in case we have to re-open device because
-+                 * of driver bug.  Careful with freeing format as input format
-+                 * could be static input_format if device reset during write.
-+                 */
-+                tmp_format = audio_format_dup(ifmt);
-+                if (input_format != NULL) {
-+                        audio_format_free(&input_format);
-+                }
-+                input_format = tmp_format;
-+
-+                tmp_format = audio_format_dup(ofmt);
-+                if (output_format != NULL) {
-+                        audio_format_free(&output_format);
-+                }
-+                output_format = tmp_format;
-+
-+		newpcm_mixer_init(audio_fd);
-+                /* Turn off loopback from input to output... not fatal so
-+                 * after error check.
-+                 */
-+		newpcm_audio_loopback(ad, 0);
-+
-+                read(audio_fd, thedev, 64);
-+                return TRUE;
-+        } else {
-+		fprintf(stderr, 
-+			"Could not open device: %s (half-duplex?)\n", 
-+			names[ad]);
-+		perror("newpcm_audio_open");
-+                newpcm_audio_close(ad);
-+                return FALSE;
-+        }
-+}
-+
-+/* Close the audio device */
-+void
-+newpcm_audio_close(audio_desc_t ad)
-+{
-+        UNUSED(ad);
-+	
-+	if (audio_fd < 0) {
-+                debug_msg("Device already closed!\n");
-+                return;
-+        }
-+        if (input_format != NULL) {
-+                audio_format_free(&input_format);
-+        }
-+        if (output_format != NULL) {
-+                audio_format_free(&output_format);
-+        }
-+	newpcm_mixer_restore(audio_fd);
-+	newpcm_audio_drain(audio_fd);
-+	close(audio_fd);
-+        audio_fd = -1;
-+}
-+
-+/* Flush input buffer */
-+void
-+newpcm_audio_drain(audio_desc_t ad)
-+{
-+        u_char buf[4];
-+        int pre, post;
-+        
-+        assert(audio_fd > 0);
-+
-+        NEWPCM_AUDIO_IOCTL(audio_fd, FIONREAD, &pre);
-+        NEWPCM_AUDIO_IOCTL(audio_fd, SNDCTL_DSP_RESET, 0);
-+        NEWPCM_AUDIO_IOCTL(audio_fd, SNDCTL_DSP_SYNC, 0);
-+        NEWPCM_AUDIO_IOCTL(audio_fd, FIONREAD, &post);
-+        debug_msg("audio drain: %d -> %d\n", pre, post);
-+        read(audio_fd, buf, sizeof(buf));
-+
-+        UNUSED(ad);
-+}
-+
-+int
-+newpcm_audio_duplex(audio_desc_t ad)
-+{
-+        /* We only ever open device full duplex! */
-+        UNUSED(ad);
-+        return TRUE;
-+}
-+
-+int
-+newpcm_audio_read(audio_desc_t ad, u_char *buf, int read_bytes)
-+{
-+        int done, this_read;
-+        int len;
-+        /* Figure out how many bytes we can read before blocking... */
-+
-+        UNUSED(ad); assert(audio_fd > 0);
-+
-+        NEWPCM_AUDIO_IOCTL(audio_fd, FIONREAD, &len);
-+
-+        len = min(len, read_bytes);
-+
-+        /* Read the data... */
-+        done = 0;
-+        while(done < len) {
-+                this_read = read(audio_fd, (void*)buf, len - done);
-+                done += this_read;
-+                buf  += this_read;
-+        }
-+        return done;
-+}
-+
-+int
-+newpcm_audio_write(audio_desc_t ad, u_char *buf, int write_bytes)
-+{
-+	int            done;
-+
-+        UNUSED(ad); assert(audio_fd > 0);
-+
-+        done = write(audio_fd, (void*)buf, write_bytes);
-+        if (done != write_bytes && errno != EINTR) {
-+                /* Only ever seen this with soundblaster cards.
-+                 * Driver occasionally packs in reading.  Seems to be
-+                 * no way to reset cleanly whilst running, even
-+                 * closing device, waiting a few 100ms and re-opening
-+                 * seems to fail.  
-+                 */
-+                perror("Error writing device.");
-+		fprintf(stderr, "Please email this message to rat-trap@cs.ucl.ac.uk with output of:\n\t uname -a\n\t cat /dev/sndstat\n");
-+                return (write_bytes - done);
-+        }
-+
-+        return write_bytes;
-+}
-+
-+/* Set ops on audio device to be non-blocking */
-+void
-+newpcm_audio_non_block(audio_desc_t ad)
-+{
-+	int             frag = 1;
-+
-+	UNUSED(ad); assert(audio_fd != -1);
-+
-+        NEWPCM_AUDIO_IOCTL(audio_fd, SNDCTL_DSP_NONBLOCK, &frag);
-+}
-+
-+/* Set ops on audio device to be blocking */
-+void
-+newpcm_audio_block(audio_desc_t ad)
-+{
-+  	int             frag = 0;
-+        
-+        UNUSED(ad); assert(audio_fd > 0);
-+        
-+        NEWPCM_AUDIO_IOCTL(audio_fd, SNDCTL_DSP_NONBLOCK, &frag);
-+} 
-+
-+
-+static int recmask, playmask;
-+
-+static void
-+newpcm_mixer_init(int fd) 
-+{
-+	int devmask;
-+
-+	NEWPCM_AUDIO_IOCTL(fd, SOUND_MIXER_READ_RECMASK, &recmask);
-+
-+	if (recmask & SOUND_MASK_MIC) {
-+		iport = SOUND_MASK_MIC;
-+	} else {
-+		iport = 1;
-+		while ((iport & recmask) == 0) {
-+			iport <<= 1;
-+		}
-+	}
-+
-+	NEWPCM_AUDIO_IOCTL(fd, SOUND_MIXER_READ_DEVMASK, &devmask);
-+	playmask = devmask & ~recmask & ~SOUND_MASK_RECLEV;
-+	debug_msg("devmask 0x%08x recmask 0x%08x playmask 0x%08x\n",
-+		  devmask,
-+		  recmask,
-+		  playmask);
-+}
-+
-+static int
-+newpcm_count_ports(int mask) 
-+{
-+	int n = 0, m = mask;
-+
-+	while (m > 0) {
-+		n += (m & 0x01);
-+		m >>= 1;
-+	}
-+
-+	return n;
-+}
-+
-+static int
-+newpcm_get_nth_port_mask(int mask, int n)
-+{
-+	static int lgmask;
-+
-+	lgmask = -1;
-+	do {
-+		lgmask ++;
-+		if ((1 << lgmask) & mask) {
-+			n--;
-+		}
-+	} while (n >= 0);
-+
-+	assert((1 << lgmask) & mask);
-+	return lgmask;
-+}
-+
-+/* Gain and volume values are in the range 0 - MAX_AMP */
-+void
-+newpcm_audio_set_ogain(audio_desc_t ad, int vol)
-+{
-+	int volume, lgport, op;
-+
-+        UNUSED(ad); assert(audio_fd > 0);
-+
-+	volume = vol << 8 | vol;
-+
-+	lgport = -1;
-+	op = oport;
-+	while (op > 0) {
-+		op >>= 1;
-+		lgport ++;
-+	}
-+
-+	NEWPCM_AUDIO_IOCTL(audio_fd, MIXER_WRITE(lgport), &volume);
-+}
-+
-+int
-+newpcm_audio_get_ogain(audio_desc_t ad)
-+{
-+	int volume, lgport, op;
-+
-+        UNUSED(ad); assert(audio_fd > 0);
-+
-+	lgport = -1;
-+	op     = oport;
-+	while (op > 0) {
-+		op >>= 1;
-+		lgport ++;
-+	}
-+
-+	NEWPCM_AUDIO_IOCTL(audio_fd, MIXER_READ(lgport), &volume);
-+
-+	return DEVICE_TO_RAT(volume & 0xff); /* Extract left channel volume */
-+}
-+
-+void
-+newpcm_audio_oport_set(audio_desc_t ad, audio_port_t port)
-+{
-+	UNUSED(ad);
-+	oport = port;
-+	return;
-+}
-+
-+audio_port_t
-+newpcm_audio_oport_get(audio_desc_t ad)
-+{
-+	UNUSED(ad);
-+	return oport;
-+}
-+
-+int
-+newpcm_audio_oport_count(audio_desc_t ad)
-+{
-+        UNUSED(ad);
-+	return newpcm_count_ports(playmask);
-+}
-+
-+const audio_port_details_t*
-+newpcm_audio_oport_details(audio_desc_t ad, int idx)
-+{
-+	static audio_port_details_t ap;
-+	int lgmask;
-+
-+	UNUSED(ad);
-+
-+	lgmask = newpcm_get_nth_port_mask(playmask, idx);
-+	ap.port = 1 << lgmask;
-+	sprintf(ap.name, "%s", port_names[lgmask]);
-+
-+        return &ap;
-+}
-+
-+void
-+newpcm_audio_set_igain(audio_desc_t ad, int gain)
-+{
-+	int volume = RAT_TO_DEVICE(gain) << 8 | RAT_TO_DEVICE(gain);
-+
-+        UNUSED(ad); assert(audio_fd > 0);
-+	newpcm_audio_loopback_config(gain);
-+	NEWPCM_AUDIO_IOCTL(audio_fd, SOUND_MIXER_WRITE_RECLEV, &volume);
-+}
-+
-+int
-+newpcm_audio_get_igain(audio_desc_t ad)
-+{
-+	int volume;
-+
-+        UNUSED(ad); assert(audio_fd > 0);
-+	NEWPCM_AUDIO_IOCTL(audio_fd, SOUND_MIXER_READ_RECLEV, &volume);
-+	return (DEVICE_TO_RAT(volume & 0xff));
-+}
-+
-+void
-+newpcm_audio_iport_set(audio_desc_t ad, audio_port_t port)
-+{
-+	/* Check port is in record mask */
-+	int gain;
-+
-+	debug_msg("port 0x%08x recmask 0x%08x\n", port, recmask);
-+
-+	assert((port & recmask) != 0);
-+
-+	if (ioctl(audio_fd, SOUND_MIXER_WRITE_RECSRC, &port) < 0) {
-+		perror("Unable to write record mask\n");
-+		return;
-+	}
-+	iport = port;
-+	gain = newpcm_audio_get_igain(ad);
-+	newpcm_audio_loopback_config(gain);
-+	UNUSED(ad);
-+}
-+
-+audio_port_t
-+newpcm_audio_iport_get(audio_desc_t ad)
-+{
-+	UNUSED(ad); assert(audio_fd > 0);
-+	return iport;
-+}
-+
-+int
-+newpcm_audio_iport_count(audio_desc_t ad)
-+{
-+	UNUSED(ad);
-+	return newpcm_count_ports(recmask);
-+}
-+
-+const audio_port_details_t *
-+newpcm_audio_iport_details(audio_desc_t ad, int idx)
-+{
-+	static audio_port_details_t ap;
-+	int lgmask;
-+
-+	UNUSED(ad);
-+
-+	lgmask = newpcm_get_nth_port_mask(recmask, idx);
-+	ap.port = 1 << lgmask;
-+	sprintf(ap.name, "%s", port_names[lgmask]);
-+
-+        return &ap;
-+}
-+
-+void
-+newpcm_audio_loopback(audio_desc_t ad, int gain)
-+{
-+        UNUSED(ad); assert(audio_fd > 0);
-+        loop = gain;
-+}
-+
-+static void
-+newpcm_audio_loopback_config(int gain) 
-+{
-+	int lgport, vol;
-+
-+	/* Find current input port id */
-+	lgport = newpcm_get_nth_port_mask(iport, 0);
-+
-+	if (loop) {
-+		vol = RAT_TO_DEVICE(gain) << 8 | RAT_TO_DEVICE(gain);
-+	} else {
-+		vol = 0;
-+	}
-+
-+	NEWPCM_AUDIO_IOCTL(audio_fd, MIXER_WRITE(lgport), &vol);
-+}
-+
-+void
-+newpcm_audio_wait_for(audio_desc_t ad, int delay_ms)
-+{
-+        if (!newpcm_audio_is_ready(ad)) {
-+                usleep((unsigned int)delay_ms * 1000);
-+        }
-+}
-+
-+int 
-+newpcm_audio_is_ready(audio_desc_t ad)
-+{
-+        int avail;
-+
-+        UNUSED(ad);
-+
-+        NEWPCM_AUDIO_IOCTL(audio_fd, FIONREAD, &avail);
-+
-+        return (avail >= sz.rec_size);
-+}
-+
-+int 
-+newpcm_audio_supports(audio_desc_t ad, audio_format *fmt)
-+{
-+        snd_capabilities s;
-+
-+        UNUSED(ad);
-+
-+        NEWPCM_AUDIO_IOCTL(audio_fd, AIOGCAP, &s);
-+        if (!newpcm_error) {
-+                if ((unsigned)fmt->sample_rate < s.rate_min || (unsigned)fmt->sample_rate > s.rate_max) return FALSE;
-+                if (fmt->channels == 1) return TRUE;                    /* Always supports mono */
-+                assert(fmt->channels == 2);
-+                if (s.formats & AFMT_STEREO) return TRUE;
-+        }
-+        return FALSE;
-+}
-+
-+int
-+newpcm_audio_query_devices()
-+{
-+        FILE *f;
-+        char buf[128], *p;
-+        int n, newpcm = FALSE;
-+
-+        f = fopen("/dev/sndstat", "r");
-+        if (f) {
-+                while (!feof(f) && ndev < NEWPCM_MAX_AUDIO_DEVICES) {
-+                        p = fgets(buf, 128, f);
-+                        n = sscanf(buf, "pcm%d: <%[A-z0-9 ]>", dev_ids + ndev, names[ndev]);
-+                        if (p && n == 2) {
-+                                debug_msg("dev (%d) name (%s)\n", dev_ids[ndev], names[ndev]);
-+                                ndev++;
-+                        } else if (strstr(buf, "newpcm")) {
-+				newpcm = TRUE;
-+			} 
-+                }
-+                fclose(f);
-+        }
-+
-+	if (newpcm == FALSE) {
-+		ndev = 0; /* Should be using Luigi's interface */
-+	}
-+
-+        return (ndev);
-+}
-+
-+int
-+newpcm_get_device_count()
-+{
-+        return ndev;
-+}
-+
-+char *
-+newpcm_get_device_name(audio_desc_t idx)
-+{
-+        if (idx >=0 && idx < ndev) {
-+                return names[idx];
-+        }
-+        return NULL;
-+}
-+
-+/* Functions to save and restore recording source and mixer levels */
-+
-+static int saved_rec_mask, saved_gain_values[SOUND_MIXER_NRDEVICES];
-+
-+static void
-+newpcm_mixer_save(int fd)
-+{
-+	int devmask, i;
-+	NEWPCM_AUDIO_IOCTL(fd, SOUND_MIXER_READ_RECSRC, &saved_rec_mask); 
-+	NEWPCM_AUDIO_IOCTL(fd, SOUND_MIXER_READ_DEVMASK, &devmask);
-+	for (i = 0; i < SOUND_MIXER_NRDEVICES; i++) {
-+		if ((1 << i) & devmask) {
-+			NEWPCM_AUDIO_IOCTL(fd, MIXER_READ(i), &saved_gain_values[i]);
-+		} else {
-+			saved_gain_values[i] = 0;
-+		}
-+	}
-+}
-+
-+static void
-+newpcm_mixer_restore(int fd)
-+{
-+	int devmask, i;
-+	NEWPCM_AUDIO_IOCTL(fd, SOUND_MIXER_WRITE_RECSRC, &saved_rec_mask); 
-+
-+	NEWPCM_AUDIO_IOCTL(fd, SOUND_MIXER_READ_DEVMASK, &devmask);
-+	for (i = 0; i < SOUND_MIXER_NRDEVICES; i++) {
-+		if ((1 << i) & devmask) {
-+			NEWPCM_AUDIO_IOCTL(fd, MIXER_WRITE(i), &saved_gain_values[i]);
-+		}
-+	}
-+}
-diff -uPr rat/auddev_newpcm.h /home/oh/src/rat-newpcm/rat/auddev_newpcm.h
---- rat/auddev_newpcm.h	Thu Jan  1 01:00:00 1970
-+++ /home/oh/src/rat-newpcm/rat/auddev_newpcm.h	Sat Sep 16 20:33:54 2000
-@@ -0,0 +1,52 @@
-+/*
-+ * FILE:     auddev_newpcm.h
-+ * PROGRAM:  RAT
-+ * AUTHOR:   Orion Hodson
-+ *
-+ * Copyright (c) 1998-2000 University College London
-+ * All rights reserved.
-+ *
-+ * $Id: auddev_newpcm.h,v 1.1 2000/09/16 17:43:24 ucacoxh Exp $
-+ */
-+
-+#ifndef _AUDDEV_NEWPCM_H_
-+#define _AUDDEV_NEWPCM_H_
-+
-+int  newpcm_audio_open       (audio_desc_t ad, audio_format* ifmt, audio_format *ofmt);
-+void newpcm_audio_close      (audio_desc_t ad);
-+void newpcm_audio_drain      (audio_desc_t ad);
-+int  newpcm_audio_duplex     (audio_desc_t ad);
-+
-+void newpcm_audio_set_igain  (audio_desc_t ad, int gain);
-+int  newpcm_audio_get_igain  (audio_desc_t ad);
-+void newpcm_audio_set_ogain  (audio_desc_t ad, int vol);
-+int  newpcm_audio_get_ogain  (audio_desc_t ad);
-+void newpcm_audio_loopback   (audio_desc_t ad, int gain);
-+
-+int  newpcm_audio_read       (audio_desc_t ad, u_char *buf, int buf_len);
-+int  newpcm_audio_write      (audio_desc_t ad, u_char *buf, int buf_len);
-+void newpcm_audio_non_block  (audio_desc_t ad);
-+void newpcm_audio_block      (audio_desc_t ad);
-+
-+void         newpcm_audio_oport_set   (audio_desc_t ad, audio_port_t port);
-+audio_port_t newpcm_audio_oport_get   (audio_desc_t ad);
-+int          newpcm_audio_oport_count (audio_desc_t ad);
-+const audio_port_details_t*
-+     newpcm_audio_oport_details       (audio_desc_t ad, int idx);
-+
-+void         newpcm_audio_iport_set   (audio_desc_t ad, audio_port_t port);
-+audio_port_t newpcm_audio_iport_get   (audio_desc_t ad);
-+int          newpcm_audio_iport_count (audio_desc_t ad);
-+const audio_port_details_t*
-+     newpcm_audio_iport_details       (audio_desc_t ad, int idx);
-+
-+int  newpcm_audio_is_ready  (audio_desc_t ad);
-+void newpcm_audio_wait_for  (audio_desc_t ad, int delay_ms);
-+int  newpcm_audio_supports  (audio_desc_t ad, audio_format *f);
-+
-+/* Functions to get names of devices */
-+int         newpcm_audio_query_devices (void);
-+int         newpcm_get_device_count    (void);
-+char       *newpcm_get_device_name     (audio_desc_t ad);
-+
-+#endif /* _AUDDEV_NEWPCM_H_ */
-diff -uPr rat/config.h.in /home/oh/src/rat-newpcm/rat/config.h.in
---- rat/config.h.in	Fri Sep  8 21:03:01 2000
-+++ /home/oh/src/rat-newpcm/rat/config.h.in	Sat Sep 16 20:34:04 2000
-@@ -27,7 +27,7 @@
- /*
-  * Define this if your C library doesn't have usleep.
-  *
-- * $Id: config.h.in,v 1.18 2000/03/03 15:05:32 ucaccsp Exp $
-+ * $Id: config.h.in,v 1.19 2000/09/16 17:43:24 ucacoxh Exp $
-  */
- #undef NEED_USLEEP
- #undef NEED_SNPRINTF
-@@ -68,12 +68,15 @@
- #undef HAVE_SGI_AUDIO
- #undef HAVE_PCA_AUDIO
- #undef HAVE_LUIGI_AUDIO
-+#undef HAVE_NEWPCM_AUDIO
- #undef HAVE_OSS_AUDIO
- #undef HAVE_HP_AUDIO
- #undef HAVE_NETBSD_AUDIO
- #undef HAVE_OSPREY_AUDIO
- #undef HAVE_MACHINE_PCAUDIOIO_H
- #undef HAVE_ALSA_AUDIO
-+
-+#undef HAVE_IPv6
- 
- /* GSM related */
- #undef SASR
-diff -uPr common/configure.in /home/oh/src/rat-newpcm/common/configure.in
---- common/configure.in	Sat Sep  9 05:02:27 2000
-+++ /home/oh/src/rat-newpcm/common/configure.in	Thu Sep 21 10:15:12 2000
-@@ -179,7 +179,7 @@
- 		AC_DEFINE(HAVE_IPv6)
- 		case "$host_os" in
- 		# FreeBSD Kame uses seperate libinet6
--		freebsd*)	
-+		freebsd[23]*)	
- 			LIBS="$LIBS -L/usr/local/v6/lib -linet6"
- 			;;
- 		*)	;;
-@@ -216,6 +216,7 @@
- 		#ifdef HAVE_NETINET6_IN6_H
- 		#include <netinet6/in6.h>
- 		#else
-+		#include <sys/types.h>
- 		#include <netinet/in.h>
- 		#endif /* HAVE_NETINET_IN6_H */
- 	],[
+--- ../../../work-pre-patch/rat-4.2.13/rat/configure.in	Sun Mar  4 12:00:33 2001
++++ rat/configure.in	Sun Mar  4 13:13:29 2001
+@@ -464,20 +464,8 @@
+ 	COMMON_LIB=${COMMON_LIB}/lib
+ fi
+ 
+-AC_CHECK_LIB(uclmmbase,
+-	mbus_init,
+-	[
+-		EXTERNAL_DEP="${EXTERNAL_DEP} ${COMMON_LIB}/libuclmmbase.a"
+-		COMMON_LIB="-L${COMMON_LIB} -luclmmbase"
+-	],
+-	[
+-		echo "Could not find libuclmmbase.a.  One of the following halted progess:"
+-		echo "   (a) Library is not installed."
+-		echo "   (b) Library is not built or not in expected location (--with-common=DIR)."
+-		echo "   (c) this script failed to see it (please inform rat-trap@cs.ucl.ac.uk)."
+-		exit
+-	],
+-	-L${COMMON_LIB})
++EXTERNAL_DEP="${EXTERNAL_DEP} ${COMMON_LIB}/libuclmmbase.a"
++COMMON_LIB="-L${COMMON_LIB} -luclmmbase"
+ 
+ AC_SUBST(COMMON_INC)
+ AC_SUBST(COMMON_LIB)
diff --git a/mbone/rat/files/patch-ac b/mbone/rat/files/patch-ac
index d2591df82283..e69de29bb2d1 100644
--- a/mbone/rat/files/patch-ac
+++ b/mbone/rat/files/patch-ac
@@ -1,120 +0,0 @@
---- rat/configure.in.orig	Thu Sep 21 10:50:51 2000
-+++ rat/configure.in	Thu Sep 21 10:51:20 2000
-@@ -1,5 +1,5 @@
- dnl UCL RAT configure script.
--dnl $Header: /cs/research/mice/starship/src/local/CVS_repository/rat/configure.in,v 1.38 2000/03/23 10:00:53 ucacoxh Exp $
-+dnl $Header: /cs/research/mice/starship/src/local/CVS_repository/rat/configure.in,v 1.39 2000/09/16 17:43:25 ucacoxh Exp $
- dnl
- dnl Process this file with GNU autoconf to generate a configure script.
- 
-@@ -195,9 +195,12 @@
- 		AU_OBJ="$AU_OBJ auddev_pca.o"
- 		AC_DEFINE(HAVE_PCA_AUDIO)
- 	fi
--	# Luigi's driver
--	AU_OBJ="$AU_OBJ auddev_luigi.o"
--	AC_DEFINE(HAVE_LUIGI_AUDIO)
-+	# Note luigi and newpcm have compatible soundcard.h files but
-+	# mixer behaves differently under both systems.  During runtime
-+	# only one of these modules will be used.
-+	AU_OBJ="$AU_OBJ auddev_luigi.o auddev_newpcm.o"
-+	AC_DEFINE(HAVE_LUIGI_AUDIO) 
-+  	AC_DEFINE(HAVE_NEWPCM_AUDIO) 
- 	;;
- *netbsd*)
- 	AU_OBJ="$AUDIOBJ auddev_netbsd.o"
-@@ -277,12 +280,12 @@
- # We could be dealing with a source installation or a full installation.
- # Expect a source installation to have headers in TCL8_HOME/generic and libs in
- # TCL8_HOME/unix.  A full installation should have headers in 
--# INSTDIR/include/tcl8.0, or INSTDIR/include, and have libraries be in 
-+# INSTDIR/include/tcl8.2, or INSTDIR/include, and have libraries be in 
- # INSTDIR/lib.
- #------------------------------------------------------------------------------
- PARENT=`echo $PWD | sed -e 's%/[[^/]]*$%%'`
--TCL_INC=${PARENT}/tcl-8.0
--TCL_LIB=${PARENT}/tcl-8.0
-+TCL_INC=${PARENT}/tcl-8.2
-+TCL_LIB=${PARENT}/tcl-8.2
- 
- AC_ARG_WITH(tcl,           
- 	[  --with-tcl=DIR          specify location of Tcl installation],
-@@ -292,7 +295,7 @@
- #-----------------------------------------------------------------------------
- # Depending on config expect tcl.h to be tcl source dir or include path
- #-----------------------------------------------------------------------------
--for i in $TCL_INC/generic $TCL_INC/include/tcl8.0 $TCL_INC/include $TCL_INC
-+for i in $TCL_INC/generic $TCL_INC/include/tcl8.2 $TCL_INC/include $TCL_INC
- do
- 	if test -d $i ; then
- 		TCL_INC=$i
-@@ -327,7 +330,7 @@
- SAVED_LIBS=$LIBS
- LIBS=""
- FOUND_TCL_LIB=no
--AC_SEARCH_LIBS(Tcl_Init, tcl8.0 tcl80, 
-+AC_SEARCH_LIBS(Tcl_Init, tcl8.2 tcl82, 
- 	FOUND_TCL_LIB=yes,
- 	, 
- 	-L${TCL_LIB} ${SAVED_LIBS} -lm)
-@@ -343,8 +346,8 @@
- 	exit
- fi
- 
--TK_INC=${PARENT}/tk-8.0
--TK_LIB=${PARENT}/tk-8.0
-+TK_INC=${PARENT}/tk-8.2
-+TK_LIB=${PARENT}/tk-8.2
- 
- AC_ARG_WITH(tk,           
- 	[  --with-tk=DIR           specify location of Tk installation],
-@@ -356,7 +359,7 @@
- # include tcl.h, Xlib.h, Xutil.h before tk.h.
- #-----------------------------------------------------------------------------
- FOUND_TK_INC=0
--for i in $TK_INC/generic $TK_INC/include/tk8.0 $TK_INC/include $TK_INC
-+for i in $TK_INC/generic $TK_INC/include/tk8.2 $TK_INC/include $TK_INC
- do
- 	AC_MSG_CHECKING(for $i/tk.h)
- 	if test -r $i/tk.h ; then
-@@ -388,7 +391,7 @@
- SAVED_LIBS=$LIBS
- LIBS=""
- FOUND_TK_LIB=no
--AC_SEARCH_LIBS(Tk_Init, tk8.0 tk80,
-+AC_SEARCH_LIBS(Tk_Init, tk8.2 tk82,
- 	FOUND_TK_LIB=yes,
- 	,
- 	-L${TK_LIB} ${TCL_LIB} $X_LIBS $X_PRE_LIBS  -lXext -lX11 $X_EXTRA_LIBS ${SAVED_LIBS} -lm)
-@@ -419,7 +422,7 @@
-                 AC_DEFINE(HAVE_IPv6)
-                 case "$host_os" in
-                 # FreeBSD Kame uses seperate libinet6
--                freebsd*)       
-+                freebsd[23]*)       
-                         LIBS="$LIBS -L/usr/local/v6/lib -linet6"
-                         ;;
-                 *)      ;;
-@@ -463,20 +466,8 @@
- 	COMMON_LIB=${COMMON_LIB}/lib
- fi
- 
--AC_CHECK_LIB(uclmmbase,
--	mbus_init,
--	[
--		EXTERNAL_DEP="${EXTERNAL_DEP} ${COMMON_LIB}/libuclmmbase.a"
--		COMMON_LIB="-L${COMMON_LIB} -luclmmbase"
--	],
--	[
--		echo "Could not find libuclmmbase.a.  One of the following halted progess:"
--		echo "   (a) Library is not installed."
--		echo "   (b) Library is not built or not in expected location (--with-common=DIR)."
--		echo "   (c) this script failed to see it (please inform rat-trap@cs.ucl.ac.uk)."
--		exit
--	],
--	-L${COMMON_LIB})
-+EXTERNAL_DEP="${EXTERNAL_DEP} ${COMMON_LIB}/libuclmmbase.a"
-+COMMON_LIB="-L${COMMON_LIB} -luclmmbase"
- 
- AC_SUBST(COMMON_INC)
- AC_SUBST(COMMON_LIB)
diff --git a/mbone/rat/files/patch-ae b/mbone/rat/files/patch-ae
index e629be28aa06..d4383c889d1d 100644
--- a/mbone/rat/files/patch-ae
+++ b/mbone/rat/files/patch-ae
@@ -1,20 +1,13 @@
---- rat/auddev_pcm.c.orig	Wed Oct 18 14:08:46 2000
-+++ rat/auddev_newpcm.c	Wed Oct 18 14:09:55 2000
-@@ -9,7 +9,7 @@
-  
- #ifndef HIDE_SOURCE_STRINGS
- static const char cvsid[] = 
--	"$Id: auddev_newpcm.c,v 1.1 2000/09/16 17:43:23 ucacoxh Exp $";
-+	"$Id: auddev_newpcm.c,v 1.3 2000/10/18 11:15:42 ucacoxh Exp $";
- #endif /* HIDE_SOURCE_STRINGS */
+--- rat/main_control.c.brokenbin	Sun Sep 17 02:26:19 2000
++++ rat/main_control.c	Sun Sep 17 02:26:38 2000
+@@ -34,8 +34,8 @@
+ #define ENGINE_NAME  "ratmedia.exe"
+ #define CONTROL_NAME "rat.exe"
+ #else
+-#define UI_NAME      "rat-"RAT_VERSION"-ui"
+-#define ENGINE_NAME  "rat-"RAT_VERSION"-media"
++#define UI_NAME      "rat-ui"
++#define ENGINE_NAME  "rat-media"
+ #endif
  
- #include "config_unix.h"
-@@ -291,6 +291,8 @@
- 
- 	NEWPCM_AUDIO_IOCTL(fd, SOUND_MIXER_READ_RECMASK, &recmask);
- 
-+	/* Remove Vol from Rec mask - it is a play control! */
-+	recmask = recmask & ~SOUND_MASK_VOLUME;
- 	if (recmask & SOUND_MASK_MIC) {
- 		iport = SOUND_MASK_MIC;
- 	} else {
+ #define DEFAULT_RTP_PORT 5004
diff --git a/mbone/rat/pkg-comment b/mbone/rat/pkg-comment
index 75a87f463029..abcb956e03eb 100644
--- a/mbone/rat/pkg-comment
+++ b/mbone/rat/pkg-comment
@@ -1 +1 @@
-Multicast and unicast robust audio conferencing tool
+IPv4/v6 Multicast and unicast audio conferencing tool