- Update to NRPE 2.11.

- Finally bump the port to the current version after remaining at 2.7 for a while
  due to garbage characters being returned by nrpe2. Issue was caused by the
  reading command buffer not being \0 terminated. This has been resolved in CVS
  but has been back-ported for now.

PR:		ports/120874
Submitted by:	Jarrod Sayers <jarrod@netleader.com.au>	(maintainer)

4 files changed, 27 insertions, 14 deletions

diff --git a/net-mgmt/nrpe2/Makefile b/net-mgmt/nrpe2/Makefile
index 7105eb320f7d..7a2f0755915b 100644
--- a/net-mgmt/nrpe2/Makefile
+++ b/net-mgmt/nrpe2/Makefile
@@ -6,8 +6,7 @@
 #
 
 PORTNAME=	nrpe2
-PORTVERSION=	2.7
-PORTREVISION=	2
+PORTVERSION=	2.11
 CATEGORIES=	net-mgmt
 MASTER_SITES=	${MASTER_SITE_SOURCEFORGE}
 MASTER_SITE_SUBDIR=	nagios
diff --git a/net-mgmt/nrpe2/distinfo b/net-mgmt/nrpe2/distinfo
index 99c8b9dc353b..49f72f2cab1a 100644
--- a/net-mgmt/nrpe2/distinfo
+++ b/net-mgmt/nrpe2/distinfo
@@ -1,3 +1,3 @@
-MD5 (nrpe-2.7.tar.gz) = c50b89d27f4ebbcedcb2bc6ab9f56a4e
-SHA256 (nrpe-2.7.tar.gz) = 13c25b63f07b96fbf4ca07dba6950309f2b350f19b9b48f36c067e127ebb352a
-SIZE (nrpe-2.7.tar.gz) = 101921
+MD5 (nrpe-2.11.tar.gz) = dcf3b7c5b7c94c0ba6cbb4999c1161f0
+SHA256 (nrpe-2.11.tar.gz) = 4cedfc2588ba65ebfe4e3310c9fbda08c6f0912cfcc2c1ac96636b6f5c839e1d
+SIZE (nrpe-2.11.tar.gz) = 405643
diff --git a/net-mgmt/nrpe2/files/patch-sample-config-nrpe.cfg.in b/net-mgmt/nrpe2/files/patch-sample-config-nrpe.cfg.in
index a5c7fad27f60..9d8893a9e039 100644
--- a/net-mgmt/nrpe2/files/patch-sample-config-nrpe.cfg.in
+++ b/net-mgmt/nrpe2/files/patch-sample-config-nrpe.cfg.in
@@ -1,15 +1,14 @@
---- sample-config/nrpe.cfg.in.orig	Tue Dec 12 12:34:00 2006
-+++ sample-config/nrpe.cfg.in	Tue Jun 26 20:16:45 2007
-@@ -190,8 +190,10 @@
+--- sample-config/nrpe.cfg.in.orig	2007-11-24 04:01:23.000000000 +1030
++++ sample-config/nrpe.cfg.in	2008-02-20 18:39:58.000000000 +1030
+@@ -198,7 +198,10 @@
  
  command[check_users]=@libexecdir@/check_users -w 5 -c 10
  command[check_load]=@libexecdir@/check_load -w 15,10,5 -c 30,25,20
--command[check_disk1]=@libexecdir@/check_disk -w 20 -c 10 -p /dev/hda1
--command[check_disk2]=@libexecdir@/check_disk -w 20 -c 10 -p /dev/hdb1
-+command[check_disk_root]=@libexecdir@/check_disk -w 20 -c 10 --path /
-+command[check_disk_var]=@libexecdir@/check_disk -w 20 -c 10 --path /var
-+command[check_disk_tmp]=@libexecdir@/check_disk -w 20 -c 10 --path /tmp
-+command[check_disk_usr]=@libexecdir@/check_disk -w 20 -c 10 --path /usr
+-command[check_hda1]=@libexecdir@/check_disk -w 20% -c 10% -p /dev/hda1
++command[check_root]=@libexecdir@/check_disk -w 20% -c 10% -p /
++command[check_var]=@libexecdir@/check_disk -w 20% -c 10% -p /var
++command[check_tmp]=@libexecdir@/check_disk -w 20% -c 10% -p /tmp
++command[check_usr]=@libexecdir@/check_disk -w 20% -c 10% -p /usr
  command[check_zombie_procs]=@libexecdir@/check_procs -w 5 -c 10 -s Z
  command[check_total_procs]=@libexecdir@/check_procs -w 150 -c 200 
  
diff --git a/net-mgmt/nrpe2/files/patch-src-nrpe.c b/net-mgmt/nrpe2/files/patch-src-nrpe.c
new file mode 100644
index 000000000000..632b4c1430d4
--- /dev/null
+++ b/net-mgmt/nrpe2/files/patch-src-nrpe.c
@@ -0,0 +1,15 @@
+--- src/nrpe.c.orig	2007-12-27 05:55:05.000000000 +1030
++++ src/nrpe.c	2008-02-20 19:19:03.000000000 +1030
+@@ -1458,8 +1458,10 @@
+ 		                }while(bytes_read==-1 && errno==EINTR);
+ 		        }
+ 
+-		if(bytes_read==-1 && output!=NULL)
+-			strcpy(output,"");
++			if(bytes_read==-1)
++				*output='\0';
++			else
++				output[bytes_read]='\0';
+ 
+ 		/* if there was a critical return code and no output AND the command time exceeded the timeout thresholds, assume a timeout */
+ 		if(result==STATE_CRITICAL && bytes_read==-1 && (end_time-start_time)>=timeout){