Upgrade to the last release. This release is basically for bug fixes.

It supports inn's storage manager => no more ugly patches!

PR:		34503
Submitted by:	thierry@pompo.net

42 files changed, 19 insertions, 1357 deletions

diff --git a/news/newsx/Makefile b/news/newsx/Makefile
index 27318da8c5ba..722d33b6eba2 100644
--- a/news/newsx/Makefile
+++ b/news/newsx/Makefile
@@ -6,33 +6,35 @@
 #
 
 PORTNAME=	newsx
-PORTVERSION=	1.4
-PORTREVISION=	1
+PORTVERSION=	1.4.6
 CATEGORIES=	news
 MASTER_SITES=	ftp://ftp.kvaleberg.com/pub/
+DISTNAME=	${PORTNAME}-${PORTVERSION:S/.6/pl6/}
 
 MAINTAINER=	thierry@pompo.net
 
+.if defined(WITH_CNEWS)
+BUILD_DEPENDS=	${LOCALBASE}/news/lib/libcnews.a:${PORTSDIR}/news/cnews
+.else !defined(WITHOUT_INN_2-X)
 BUILD_DEPENDS=	${LOCALBASE}/news/lib/libinn.a:${PORTSDIR}/news/inn
+.endif
+
+USE_AUTOMAKE_VER=14
+CONFIGURE_ENV=	PATH="${PATH}:${LOCALBASE}/news/bin"
+.if !defined(WITH_CNEWS)
+.if !defined(WITHOUT_INN_2-X)
+CONFIGURE_ENV+=	CPPFLAGS="-I${LOCALBASE}/news/include"
+CONFIGURE_ARGS=	--with-newslib=${LOCALBASE}/news/lib
+.endif
+.endif
 
-hdr_dir=	${LOCALBASE}/news/include
+HDR_DIR=	${LOCALBASE}/news/include
 
 DOCS=		AUTHORS COPYING ChangeLog FAQ INSTALL NEWS README TODO
 
-post-extract:
-	@${ECHO} "*********************************************************"
-	@${ECHO} "If this step fails, then you probably don't have made inn"
-	@${ECHO} "Go to ${PORTSDIR}/news/inn, and then make it (no need to"
-	@${ECHO} "make install again if inn is already installed)."
-	@${ECHO} "*********************************************************"
-	${CP} ${hdr_dir}/storage.h	${WRKSRC}/lib
-	${CP} ${hdr_dir}/config.h	${WRKSRC}/lib
-	${CP} ${hdr_dir}/libinn.h	${WRKSRC}/src
-	${CP} ${hdr_dir}/libinn.h	${WRKSRC}/dbz
-	${CP} ${hdr_dir}/clibrary.h	${WRKSRC}/dbz
+post-patch:
+	@${PERL} -pi -e "s:%%LOCALBASE%%:${LOCALBASE}:" ${WRKSRC}/configure.in
 
-# Remark: newsx does not really requires inn, but this port has specially
-# been built to run with inn 2.3x.
 pre-configure:
 	@${ECHO} "*********************************************************"
 	@${ECHO} "If the configure step fails, then you probably don't have"
@@ -41,10 +43,6 @@ pre-configure:
 	@${ECHO} "again."
 	@${ECHO} "*********************************************************"
 
-post-configure:
-	@${PERL} -pi -e "s:^LIBS = :LIBS = -L${LOCALBASE}/news/lib -linn:g" \
-	${WRKSRC}/test/Makefile
-
 post-install:
 .if !defined(NOPORTDOCS)
 	@${MKDIR} ${DOCSDIR}
@@ -54,9 +52,6 @@ post-install:
 	@${ECHO} "Documentation installed in ${DOCSDIR}."
 .endif
 
-#GNU_CONFIGURE=	yes
-USE_AUTOMAKE_VER=14
-
 MAN1=	newsq.1
 MAN5=	newsx.conf.5 in.hosts.5
 MAN8=	newsx.8
diff --git a/news/newsx/distinfo b/news/newsx/distinfo
index 9ea8eda908c2..3492cb847368 100644
--- a/news/newsx/distinfo
+++ b/news/newsx/distinfo
@@ -1 +1 @@
-MD5 (newsx-1.4.tar.gz) = 446214ac6ef1f821dcd96106c6e689c5
+MD5 (newsx-1.4pl6.tar.gz) = bbd6fcd33cdc9469b81f1e168fb2478c
diff --git a/news/newsx/files/patch-aa b/news/newsx/files/patch-aa
deleted file mode 100644
index 54385f2bcd86..000000000000
--- a/news/newsx/files/patch-aa
+++ /dev/null
@@ -1,48 +0,0 @@
---- configure.in.orig	Tue Apr 20 16:49:01 1999
-+++ configure.in	Sat Mar  3 17:12:12 2001
-@@ -425,10 +425,10 @@
- 	dnl $RNEWS
- 	PATHETC="$NEWSHOME"
- 	SPOOL="$NEWSARTS"
--	BATCH="$NEWSARTS/out.going"
--	INCOMING="$NEWSARTS/in.coming"
-+	BATCH="$NEWSARTS/outgoing"
-+	INCOMING="$NEWSARTS/incoming"
- 	if test x$INHOSTS = x ; then
--	    INHOSTS="$NEWSARTS/in.hosts"
-+	    INHOSTS="$NEWSARTS/inhosts"
- 	fi
- 
- 	dnl This is pretty standard:
-@@ -610,9 +610,10 @@
- if test x$INN_MODE = x1; then
-     CFLAGS_save="$CFLAGS"
-     CFLAGS="$CFLAGS -L$NEWSLIB"
-+    LIBS_save="$LIBS"
-+    LIBS="$LIBS -linn -lstorage"
-     AC_CHECK_LIB(inn, HashMessageID, HAVE_LIBINN=1)
- 
--    LIBS_save="$LIBS"
-     dnl
-     dnl BUG:
-     dnl Note that double inclusion of -lstorage seem to be required
-@@ -702,7 +703,7 @@
- dnl
- dnl We must have sensible default values
- dnl for all files and directories mentioned in the
--dnl documentation
-+dnl documentation.  Use new INN names as defaults.
- dnl
- mkdoc ()
- {
-@@ -718,8 +719,8 @@
- mkdoc SPOOL             "/var/spool/news"
- mkdoc NEWSHOME          "/usr/lib/news"
- mkdoc NEWSBIN           "/usr/lib/newsbin"
--mkdoc BATCH             "$DOC_SPOOL/out.going"
--mkdoc INCOMING          "$DOC_SPOOL/in.coming"
-+mkdoc BATCH             "$DOC_SPOOL/outgoing"
-+mkdoc INCOMING          "$DOC_SPOOL/incoming"
- mkdoc INHOSTS           "$DOC_SPOOL/in.hosts"
- mkdoc LOCKS             "$DOC_NEWSHOME"
- mkdoc PATHETC           "$DOC_NEWSHOME"
diff --git a/news/newsx/files/patch-ab b/news/newsx/files/patch-ab
deleted file mode 100644
index bd631b800a81..000000000000
--- a/news/newsx/files/patch-ab
+++ /dev/null
@@ -1,76 +0,0 @@
---- INSTALL.orig	Thu Apr  8 04:12:00 1999
-+++ INSTALL	Fri Feb  9 05:54:42 2001
-@@ -1,27 +1,46 @@
-+Installation Summary
-+--------------------
- 
--Basic Installation
--==================
-+To compile and install this package:
- 
--The easiest way to compile this package is:
-+  1. Set up your local news server first.  Newsx auto-configuration
-+     checks what news server files and directories exist.
- 
--  1. Type `make' to configure tha package for your system and compile
--     the package.
-+  2. Look over the Installation Details and Special Cases below to see if
-+     you need to give ./configure any special options.
- 
--     To run the configuration as a seperate step, type `./configure'.
-+  3. As user 'news' (or whatever owns your USENET News software), do
- 
--  2. Type `make install' to install the programs and any data files and
--     documentation. You will often have to switch to superuser mode for
--     this.
-+		./configure     (with the options you prefer)
- 
--  3. Consult the README and FAQ for further advice regarding installation
-+     (Note: ./configure produces README from README.in .)
-+
-+		make		(to build the programs).
-+
-+  4. If you need to be superuser/root to install software, do so, then do
-+
-+	 	make install	(installs the programs, data files, and
-+				 documentation).
-+
-+  5. Consult the README and FAQ for further advice regarding installation
-      and setting up the package.
- 
--  4. You can remove the program binaries and object files from the
-+  6. You can remove the program binaries and object files from the
-      source code directory by typing `make clean'.  To also remove the
-      files that `configure' created (so you can compile the package for
-      a different kind of computer), type `make distclean'. 
- 
- 
-+Installation Details and Special Cases
-+--------------------------------------
-+
-+Linux
-+=====
-+
-+Linux users should check "http://web.tiscalinet.it/kalem/newsx.html".
-+It has some RPM and Debian-related changes you may find useful.
-+
-+
- Support for INN 2.x
- ===================
- 
-@@ -131,7 +150,13 @@
- A warning: not all `configure' scripts look for a site script.
- 
- 
--$Id: INSTALL,v 1.7 1999/04/08 08:04:32 src Exp $
--
-+WORKAROUNDS
-+===========
- 
-+1) `dbx newsx' complains of a symbol table problem and won't run
- 
-+   Apparently, `gcc -g' can produce things dbx can't handle.  This has been
-+   seen in dbz/dbz-v3.o, dbz/dbz.o, and dbz/hash.o.  Recompile the file
-+   without the "-g" option and relink newsx.  E.g., if dbx complains about
-+   dbz/dbz.o, edit dbz/Makefile to remove "-g " from CFLAGS,
-+   `rm dbz/dbz.o src/newsx', and rerun `make'.
diff --git a/news/newsx/files/patch-ac b/news/newsx/files/patch-ac
deleted file mode 100644
index 6430b09cd88f..000000000000
--- a/news/newsx/files/patch-ac
+++ /dev/null
@@ -1,21 +0,0 @@
---- Makefile.in.orig	Sun Apr 25 03:08:10 1999
-+++ Makefile.in	Fri Feb  9 05:03:35 2001
-@@ -135,12 +135,14 @@
- CTAGS_ARGS = config.h
- ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
- mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
--CONFIG_HEADER = config.h
- CONFIG_CLEAN_FILES =  README newsx.spec
-+CONFIG_HEADER = config.h
-+CONFIG_STATUS_DEPENDENCIES =
-+CONFIGURE_DEPENDENCIES = 
- DIST_COMMON =  README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \
--Makefile.am Makefile.in NEWS README.in TODO acconfig.h aclocal.m4 \
--config.guess config.h.in configure configure.in install-sh missing \
--mkinstalldirs newsx.spec.in
-+   Makefile.am Makefile.in NEWS README.in TODO acconfig.h aclocal.m4 \
-+   config.guess config.h.in configure configure.in install-sh missing \
-+   mkinstalldirs newsx.spec.in
- 
- 
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
diff --git a/news/newsx/files/patch-ad b/news/newsx/files/patch-ad
deleted file mode 100644
index 33e3f7654970..000000000000
--- a/news/newsx/files/patch-ad
+++ /dev/null
@@ -1,284 +0,0 @@
---- README.in.orig	Wed Apr 21 01:16:33 1999
-+++ README.in	Fri Feb  9 05:51:35 2001
-@@ -1,9 +1,12 @@
-+[edited by Winston Edmond  02/2001
-+ Note: `./README' will be created by `./configure' from `README.in']
-+
- 
- 	     Newsx - An NNTP client for posting and fetching news
- 	     ====================================================
- 
--			      Version @VERSION@
--		       Written by Egil Kvaleberg
-+			       Version @VERSION@
-+			Written by Egil Kvaleberg
- 					
- 				 ------
- 
-@@ -107,36 +110,66 @@
- test              Directory for test code
- 
- 
--COMPILE AND INSTALL
---------------------
--
--1. Type `make', and hopefully you will get the newsx executable.
--   Read the INSTALL for further enlightenment.
-+CONFIGURE, COMPILE, AND INSTALL
-+-------------------------------
- 
--2. Type `su' to become root, and then `make install' to install the
--   executables and the man pages.
-+1. Set up your local news server first.  Newsx auto-configuration depends
-+   on the news server files and directories it finds and where.
- 
-+2. Glance at ./INSTALL to see if you need any special configuration
-+   options.  Run ./configure with the options you prefer.
- 
--MAILING LISTS
---------------
-+3. Type `make', and hopefully you will get the newsx executable.
- 
--If you want to be informed about future newsx versions and receive
--possible bug alerts, you can send an email message to:
--
--	majordomo@kvaleberg.no
--
--with the following line in the message body:
--
--	subscribe newsx-announce
-+4. Type `su' to become root, and then `make install' to install the
-+   executables and the man pages.
- 
--If you want to join the newsx discussion list, you can send an
--email message to the same address with the following line in the
--message body:
- 
--	subscribe newsx
-+QUICK START -- GENERAL
-+----------------------
- 
--The Usenet newsgroup news.software.nntp is also a suitable forum for
--discussing newsx.
-+Newsx moves articles between servers, so you need to have a working local
-+news server with at least one newsgroup in order to test newsx.  There are
-+two basic tests:
-+  (1) can an article locally posted to the newsgroup and queued by the news
-+       server for delivery to the remote server be successfully sent to the
-+       remote server, and
-+  (2) can articles from the remote server be fetched and placed in the
-+       local server's "in" queue.
-+The "QUICK START WITH INN/C-NEWS" instructions below walk you through these
-+tests.
-+
-+By default, an in.hosts/$server file is built automatically and will fetch
-+all articles in all groups listed in active (except as limited by the sys
-+file or command line options).  It is sometimes worthwhile to set up this
-+file by hand rather than accept the default.
-+
-+Special case #1:
-+   * you've been reading news DIRECTLY from one or more REMOTE servers,
-+   * you're now setting up a local server, AND
-+   * you'd like to avoid downloading articles you've already seen.
-+
-+   You can copy your $HOME/.newsrc file and use it as the initial
-+   in.hosts/$server file!  The (remote server's) article numbers will be
-+   extracted, and if you use "--forget-inactive" the first time you call
-+   `newsx', groups that were in .newsrc that you've unsubscribed to will be
-+   eliminated from in.hosts/$server, and current and future downloading
-+   will be limited to only the groups you're subscribed to at the time.
-+   (This does not "track" newsgroup subscription changes you make later.)
-+
-+Special case #2:
-+   * you've been running a local server for some time and have lots of
-+       newsgroups in 'active' that you don't want fetched.
-+
-+   Use the 'active' file or a .newsrc file, remove the article numbers
-+   (assuming they're the local server's article numbers), trim the list
-+   down to the groups you want, and use that as the in.hosts/$server
-+   file.
-+
-+WARNING:
-+   Newsgroups can have LOTS of articles.  Please look at the newsx man page
-+   descriptions of --maxnew, --syncnew, and --maxart before running newsx
-+   to pull articles from the remote server the first time.
- 
- 
- QUICK START WITH INN
-@@ -144,6 +177,7 @@
- 
- We assume that you already have INN installed. What you have to do is:
- 
-+SETUP:
-  1. Do all maintenance of the news system as user `@DOC_NEWSUSER@'. Ensure
-     that the `.profile' of this user defines a path that includes
-     `@DOC_NEWSBIN@'. E.g.:
-@@ -168,14 +202,21 @@
-     the special `newsx' in the example above with the particular exclude
-     string for the newsserver in question.
- 
-- 3. If you haven't done so already, define one or more newsgroups that 
--    will appear in the `@DOC_ACTIVE@' file:
-+ 3. If you haven't done so already, create one or more newsgroups in the
-+    `@DOC_ACTIVE@' file that you will be fetching from the remote
-+    newsserver:
- 
- 	ctlinnd newgroup acme.test
- 
-- 4. Try to fetch news articles for these groups by doing:
-+FETCH TEST:
-+ 4. Dry-run test fetching news articles for these groups by doing:
-+
-+	newsx -ddddd -n --maxnew 100 acme news.acme.net
-+
-+    If the output looks correct, try running it for real (using your
-+    preference of --maxnew, --maxart, and --syncnew options):
- 
--	newsx -ddddd acme news.acme.net
-+	newsx -dd --maxnew 100 acme news.acme.net
- 
-  5. The articles should now appear in the incoming batch
-     `@DOC_INCOMING@'. If you invoke:
-@@ -185,13 +226,15 @@
-     the incoming articles should appear in the news spool. In the
-     example, you may look for them in `@DOC_SPOOL@/acme/test'.
- 
-+POST TEST:
-  6. Using a newsreader, post an article to a suitable test group. Try to 
-     use a group with as small distribution as possible, preferably local 
-     to the external newsserver you are using. If you haven't done so 
-     already, the group must be in the `@DOC_ACTIVE@' file.
- 
--    The next time that `rnews' is invoked, the articles will be output
--    to the spool file `@DOC_BATCH@/acme' specified in the `@DOC_NEWSFEEDS@' file.
-+    The next time that `rnews' is invoked, the articles will be output to
-+    the spool file `@DOC_BATCH@/acme' specified in the
-+    `@DOC_NEWSFEEDS@' file.
- 
-  7. Run:
- 
-@@ -210,16 +253,11 @@
- 
- 	newsx -l posted.log -f posted acme news.acme.net
- 
-- 9. To catch up with new newsgroups in a quicker way, you may want to
--    limit the number of articles fetched by adding the option:
--
--		--maxnew 100
--
--10. You may want to arrange for automatic news exchange by using `crontab'.
-+ 9. You may want to arrange for automatic news exchange by using `crontab'.
-     It is usually good to invoke `newsrun' before and after the newsx
-     session.
- 
--11. For more information about how to set up news and other subjects related
-+10. For more information about how to set up news and other subjects related
-     to use of ordinary ISP accounts, you might want to consult:
- 
- 	http://www.kvaleberg.com/ISP-Hookup-HOWTO.html
-@@ -231,6 +269,7 @@
- 
- We assume that you already have C News installed. What you have to do is:
- 
-+SETUP:
-  1. Do all maintenance of the news system as user `@DOC_NEWSUSER@'. Ensure
-     that the `.profile' of this user defines a path that includes
-     `@DOC_NEWSBIN@'. E.g.:
-@@ -244,8 +283,9 @@
- 	ME:all/all::
- 	acme/newsx:all,!junk,!control/all:FL:
- 
--    The outgoing batch will be named `acme' - replace `acme' with what
--    is appropriate for your configuration.
-+    The filename of the outgoing batch will be the server's name, `acme' in
-+    the example above.  Replace `acme' with what is appropriate for your
-+    configuration.
- 
-     All groups that you do NOT want to exchange with the host in question
-     should be listed with an `!' before it, the `junk' group being a
-@@ -254,27 +294,38 @@
-     The L-flag is a double insurance that only actual local postings will
-     be sent out.
- 
--    NOTE: Depending on how you use the spool, you may want to replace
--    the special `newsx' in the example above with the particular exclude
--    string for the newsserver in question.
--
-- 3. If you haven't done so already, define one or more newsgroups that 
--    will appear in the `@DOC_ACTIVE@' file:
-+    NOTE: Depending on how you use the spool, you may want to replace the
-+    special `newsx' in the example above with the particular exclude string
-+    for the newsserver in question.  This is particularly true if you are
-+    sending and receiving news with multiple servers or if the local system
-+    names you're using aren't the name the servers use for themselvers in
-+    "Path:".
-+
-+ 3. If you haven't done so already, create one or more newsgroups in the
-+    `@DOC_ACTIVE@' file that you will be fetching from the remote
-+    newsserver:
- 
- 	addgroup acme.test y
- 
-- 4. Try to fetch news articles for these groups by doing:
-+FETCH TEST:
-+ 4. Dry-run test fetching news articles for these groups by doing:
-+
-+	newsx -ddddd -n --maxnew 100 acme news.acme.net
- 
--	newsx -ddddd acme news.acme.net
-+    If the output looks correct, try running it for real (using your
-+    preference of --maxnew, --maxart, and --syncnew options):
-+
-+	newsx -dd --maxnew 100 acme news.acme.net
- 
-  5. The articles should now appear in the incoming batch
--    `@DOC_INCOMING@'. If you invoke:
-+    `@DOC_INCOMING@'.  If you invoke:
- 
- 	newsrun 
- 
--    the incoming articles should appear in the news spool. In the
--    example, you may look for them in `@DOC_SPOOL@/acme/test'.
-+    the incoming articles should appear in the news spool.  For newsgroup
-+    acme.test, articles would be placed in `@DOC_SPOOL@/acme/test/'.
- 
-+POST TEST:
-  6. Using a newsreader, post an article to a suitable test group. Try to 
-     use a group with as small distribution as possible, preferably local 
-     to the external newsserver you are using. If you haven't done so 
-@@ -287,6 +338,28 @@
-  7. Continue with point 7 in the INN explanation above.
- 
- 
-+MAILING LISTS
-+-------------
-+
-+If you want to be informed about future newsx versions and receive
-+possible bug alerts, you can send an email message to:
-+
-+	majordomo@kvaleberg.no
-+
-+with the following line in the message body:
-+
-+	subscribe newsx-announce
-+
-+If you want to join the newsx discussion list, you can send an
-+email message to the same address with the following line in the
-+message body:
-+
-+	subscribe newsx
-+
-+The Usenet newsgroup news.software.nntp is also a suitable forum for
-+discussing newsx.
-+
-+
- LEGAL MATTER
- ------------
- 
-@@ -398,6 +471,3 @@
- 	Husebybakken 14A
- 	N-0379 Oslo
- 	Norway         
--
--
--$Id: README.in,v 1.60 1999/04/21 05:16:33 src Exp $
diff --git a/news/newsx/files/patch-ae b/news/newsx/files/patch-ae
deleted file mode 100644
index 2a5a4430d9ff..000000000000
--- a/news/newsx/files/patch-ae
+++ /dev/null
@@ -1,15 +0,0 @@
---- config.h.in.orig	Sun Apr 18 23:08:14 1999
-+++ config.h.in	Fri Feb  9 03:35:08 2001
-@@ -72,10 +72,10 @@
- /* "/var/spool/news" */
- #undef SPOOL
- 
--/* "/var/spool/news/out.going" */
-+/* /var/spool/news/ out.going(C-News) or outgoing(INN) */
- #undef BATCH
- 
--/* "/var/spool/news/in.coming" */
-+/* /var/spool/news/ in.coming(C-News) or incoming(INN) */
- #undef INCOMING
- 
- /* "/var/spool/news/in.hosts" */
diff --git a/news/newsx/files/patch-af b/news/newsx/files/patch-af
deleted file mode 100644
index aa0cd6f3c47d..000000000000
--- a/news/newsx/files/patch-af
+++ /dev/null
@@ -1,37 +0,0 @@
---- lib/getopt.c.orig	Sun Sep 27 09:34:20 1998
-+++ lib/getopt.c	Thu Feb 15 21:30:54 2001
-@@ -23,6 +23,9 @@
-    Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
- 
-    $Log: getopt.c,v $
-+   Revision x.x  2001/02/14
-+   Got rid of another gcc warning (<thierry@thomas.as>)
-+
-    Revision 1.2  1998/09/27 07:34:20  src
-    Got rid of gcc warning
- 
-@@ -554,17 +557,20 @@
- 	      else
- 		{
- 		  if (opterr)
-+		   {
- 		   if (argv[optind - 1][1] == '-')
- 		    /* --option */
- 		    fprintf (stderr,
- 		     gettext ("%s: option `--%s' doesn't allow an argument\n"),
- 		     argv[0], pfound->name);
- 		   else
-+		     {
- 		    /* +option or -option */
--		    fprintf (stderr,
--		     gettext ("%s: option `%c%s' doesn't allow an argument\n"),
--		     argv[0], argv[optind - 1][0], pfound->name);
--
-+			fprintf (stderr,
-+			gettext ("%s: option `%c%s' doesn't allow an argument\n"),
-+			argv[0], argv[optind - 1][0], pfound->name);
-+		     }
-+		   }
- 		  nextchar += strlen (nextchar);
- 		  return '?';
- 		}
diff --git a/news/newsx/files/patch-ag b/news/newsx/files/patch-ag
deleted file mode 100644
index 7a5b1ab5e4a8..000000000000
--- a/news/newsx/files/patch-ag
+++ /dev/null
@@ -1,11 +0,0 @@
---- dbz/Makefile.in.orig	Sun Apr 25 03:08:40 1999
-+++ dbz/Makefile.in	Fri Feb  9 05:23:08 2001
-@@ -198,7 +198,7 @@
- 	$(COMPILE) -c $<
- 
- mostlyclean-compile:
--	-rm -f *.o core *.core
-+	-rm -f *.o core *.core endian *.a
- 
- clean-compile:
- 
diff --git a/news/newsx/files/patch-ah b/news/newsx/files/patch-ah
deleted file mode 100644
index f749e5b16cd7..000000000000
--- a/news/newsx/files/patch-ah
+++ /dev/null
@@ -1,12 +0,0 @@
---- dbz/dbz-v6.c.orig	Thu Apr  8 06:48:51 1999
-+++ dbz/dbz-v6.c	Sun Jan 21 11:19:14 2001
-@@ -116,6 +116,9 @@
- #if HAVE_SYS_TIME_H
- #  include <sys/time.h>
- #endif
-+#if HAVE_MEMORY_H
-+#  include <memory.h>
-+#endif
- 
- #include <stdio.h> 
- #include <unistd.h>
diff --git a/news/newsx/files/patch-ai b/news/newsx/files/patch-ai
deleted file mode 100644
index 656bb2f85cc7..000000000000
--- a/news/newsx/files/patch-ai
+++ /dev/null
@@ -1,19 +0,0 @@
---- dbz/hash.c.orig	Fri Mar  5 06:20:34 1999
-+++ dbz/hash.c	Sun Jan 21 11:31:49 2001
-@@ -23,10 +23,15 @@
-    Revision 1.3  1998/07/12 09:39:19  src
-    NewsX version 1.0
- */
-+#include "configdata.h"
-+
-+#if HAVE_MEMORY_H
-+#  include <memory.h>
-+#endif
-+
- #include <stdio.h>
- #include <sys/types.h>
- #include <ctype.h>
--#include "configdata.h"
- 
- #include "clibrary.h"
- #include "libinn.h"
diff --git a/news/newsx/files/patch-aj b/news/newsx/files/patch-aj
deleted file mode 100644
index 86515c32c2ef..000000000000
--- a/news/newsx/files/patch-aj
+++ /dev/null
@@ -1,61 +0,0 @@
---- doc/in.hosts.5.in.orig	Tue Apr 20 02:45:46 1999
-+++ doc/in.hosts.5.in	Sun Jan 21 14:52:33 2001
-@@ -45,29 +45,38 @@
- file that describes what the latest article is that has been fetched from
- that particular host. 
- .PP
--As long as you want to get all news articles in the groups defined at your
--local server, there is no need to do anything to make construct this file,
--it will take care of itself.
-+If you want to get all news articles in all the groups defined at your
-+local server, do nothing and let the file be constructed automatically.
-+Other choices, such as using multiple
-+.IR cron (8)
-+entries and
-+.IR newsx (8)
-+end tags to control when certain newsgroups are fetched,
-+or using
-+.B .newsrc
-+article numbers to avoid fetching articles you've already seen,
-+require setting up the
-+.B in.hosts
-+file for the server by hand.
- .PP
- The format of this file is simple:
- .PP
--Blank lines and lines starting with a '#' will be treated as comments.
-+Blank lines and lines starting with a '#' are treated as comments.
- .PP
--Lines starting with a ':' indicates a tag for use with the 
--newsx \fB-e\fP option.
-+Lines starting with a ':' indicate a tag for use with the 
-+newsx \fB-e\fP (end tag) option.
- .PP
- Otherwise, each line consists of a newsgroup name and the first unread
--article number, separated by whitespace. A missing article number 
--corresponds to zero, meaning that all available articles on the
--server will be read.
-+article number, separated by whitespace.   No article number is the same
-+as zero, meaning that all available articles on the server will be read.
- .PP
- It is important to realize that there is one unique file belonging to 
- each remote newsserver, and that they should not be mixed.
- .PP
- If switching from reading news via an NNTP newsreader to fetching with
--newsx, it is possible to use a existing
-+newsx, it is possible to use an existing
- .B ".newsrc" 
--file directly as basis for making an initial
-+file directly as the initial
- \fB\*j/\fP\fIspoolname\fP
- file. 
- 
-@@ -77,7 +86,7 @@
- Incoming host state file.
- There should be one of these per external news server.
- .IP "\*j/\fIspoolname\fP.tmp"
--Incoming spool, temporary (while news are being pulled).
-+Incoming spool, temporary (while news is being pulled).
- .IP "\*j/\fIspoolname\fP.old"
- Previous generation of the external host state file.
- .IP "\*j/\fIspoolname\fP.conf" .
diff --git a/news/newsx/files/patch-ak b/news/newsx/files/patch-ak
deleted file mode 100644
index 8bcd04ae2528..000000000000
--- a/news/newsx/files/patch-ak
+++ /dev/null
@@ -1,33 +0,0 @@
---- doc/newsx.8.in.orig	Sat Apr 24 13:55:27 1999
-+++ doc/newsx.8.in	Mon Jan 22 21:07:25 2001
-@@ -515,16 +515,15 @@
- .RS
- This option is particularily useful to specify unsymmetric behaviour, i.e.
- groups where there will be outgoing traffic, but no incoming articles.
--For instance,
--to explicitly avoid fetching of control groups, use:
-+For instance, to explicitly avoid fetching of control groups, use:
- .br
- 	  --groups '!control.*'
--.TP
-+.PP
- It can also be useful to specify that only a subset of groups should be
- fetched for the occasion, e.g:
- .br
- 	  --groups 'comp.*,!*.advocacy'
--.TP
-+.PP
- It is recommended to put the argument for --groups in single quotes.
- 
- .SH "GENERAL OPTIONS"
-@@ -552,6 +551,10 @@
- Do not update the process status display.
- 
- .SH "OPTIONS FOR NEWSGROUPS"
-+.PP
-+NOTE: Unless otherwise specified, these options are IN ADDITION TO the usual
-+actions and do NOT imply --no-post or --no-fetch.  Specify those switches if
-+desired.
- .TP
- \fB--list\fP\fI listname\fP
- Obtain a list of newsgroups from the newsserver to
diff --git a/news/newsx/files/patch-al b/news/newsx/files/patch-al
deleted file mode 100644
index 771787263ace..000000000000
--- a/news/newsx/files/patch-al
+++ /dev/null
@@ -1,19 +0,0 @@
---- doc/newsx.conf.5.in.orig	Wed Apr 21 01:13:12 1999
-+++ doc/newsx.conf.5.in	Sun Jan 21 14:08:22 2001
-@@ -34,14 +34,10 @@
- 
- .SH DESCRIPTION
- .PP
--The
- .B "newsx.conf"
--will be
--be read before 
-+is a profile file read by
- .IR newsx (8)
--the command line argument parsing commences.
--.PP
--The profile contains standard
-+before processing the command line arguments.  It contains standard
- .IR newsx (8)
- command line options. The leading dashes for options are mandatory.
- Several lines may be used.
diff --git a/news/newsx/files/patch-am b/news/newsx/files/patch-am
deleted file mode 100644
index 230793e60e5d..000000000000
--- a/news/newsx/files/patch-am
+++ /dev/null
@@ -1,11 +0,0 @@
---- lib/Makefile.in.orig	Sun Apr 25 03:08:26 1999
-+++ lib/Makefile.in	Fri Feb  9 05:22:26 2001
-@@ -203,7 +203,7 @@
- 	$(COMPILE) -c $<
- 
- mostlyclean-compile:
--	-rm -f *.o core *.core
-+	-rm -f *.o core *.core *.a
- 
- clean-compile:
- 
diff --git a/news/newsx/files/patch-an b/news/newsx/files/patch-an
deleted file mode 100644
index 24435366db36..000000000000
--- a/news/newsx/files/patch-an
+++ /dev/null
@@ -1,25 +0,0 @@
---- src/filter.c.orig	Mon Nov 23 07:25:48 1998
-+++ src/filter.c	Wed Jan 24 06:37:22 2001
-@@ -40,6 +40,22 @@
- static int filter_open = 0;
- static SOCKET_D filter_sock; /* BUG: no... */
- 
-+#ifndef HAVE_STRTOUL
-+/*
-+ *  for systems that doesn't have it, assuming base<=10
-+ */
-+long 
-+strtoul(char *str,char **endptr,int base)
-+{
-+    long u = 0L;
-+    char c;
-+    while (isspace(*str)) ++str;
-+    while (isdigit(c = *str++)) u = u*base + c-'0';
-+    if (endptr)  *endptr = str;
-+    return u;
-+}
-+#endif
-+	
- /*
-  *  start the program if not active already
-  */
diff --git a/news/newsx/files/patch-ao b/news/newsx/files/patch-ao
deleted file mode 100644
index 5c2dfc8380bf..000000000000
--- a/news/newsx/files/patch-ao
+++ /dev/null
@@ -1,12 +0,0 @@
---- src/logmsg.c.orig	Tue Mar 30 22:38:28 1999
-+++ src/logmsg.c	Sun Jan 21 10:47:05 2001
-@@ -121,7 +121,8 @@
-     return strerror(err);
- #else
-     static char buf[30];
--    sprintf("errno %d",err);
-+    sprintf(buf,"errno %d",err);
-+    return buf;
- #endif
- }
- 
diff --git a/news/newsx/files/patch-ap b/news/newsx/files/patch-ap
deleted file mode 100644
index 7da757a87013..000000000000
--- a/news/newsx/files/patch-ap
+++ /dev/null
@@ -1,21 +0,0 @@
---- src/main.c.orig	Sun Apr 25 09:00:37 1999
-+++ src/main.c	Sat Mar  3 23:06:24 2001
-@@ -20,6 +20,9 @@
-  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-  *
-  *  $Log: main.c,v $
-+ *  Revision x.xx  2001/02/11
-+ *  Use libinn.h (<thierry@thomas.as>)
-+ *
-  *  Revision 1.46  1999/04/25 07:00:37  src
-  *  Mellowed error message for missing standard profiles
-  *
-@@ -380,6 +383,8 @@
- {
-     int c;
-     char *p;
-+
-+    optind = 0;			/* tell getopt to reset internal variables */
- 
-     for (;;) {
- 	option_index = -1;
diff --git a/news/newsx/files/patch-aq b/news/newsx/files/patch-aq
deleted file mode 100644
index bda7749aa058..000000000000
--- a/news/newsx/files/patch-aq
+++ /dev/null
@@ -1,83 +0,0 @@
---- src/pull.c.orig	Mon Mar 15 02:45:13 1999
-+++ src/pull.c	Wed Jan 24 15:27:03 2001
-@@ -280,36 +280,71 @@
- 		}
- 		fprintf(pull_tmp,":%s\n",t);
- 	    } else {
-+		char c = '\0';
- 		/* must be a group name */
- 		where = 0;
--		if ((n=sscanf(p,"%[^ \n\t!:] %ld",group,&where)) < 1) {
-+		if ((n=sscanf(p,"%[^ \n\t!:]%c %ld",group,&c,&where)) < 1) {
- 		    if (!skip) {
- 			bad_syntax(p,n,1,"host active");
- 			fprintf(pull_tmp,"#ERR# %s",buf);
- 		    }
- 		} else {
-+		    /* If .newsrc used for in.hosts file, and it says the
-+		       group isn't being read, treat the group as inactive,
-+		       even if it appears in 'active'. */
-+		    unsigned int ignore_this_group;
-+		    if (c == '!'  ||  c == ':') {
-+			ignore_this_group = (c == '!');
-+			/* Assume .newsrc format line: get last number and
-+			   find the end of (potentially very) long lines */
-+			t = p + strlen(p) - 1;	/* n>=1 && c ensure t > p */
-+			while (*t != '\n') {
-+			    /* .newsrc line (still) longer than BUFSIZ! */
-+			    while (isdigit(t[-1]))  --t;
-+			    strcpy (buf,t);
-+			    n = strlen(buf);
-+			    p = buf+n;
-+			    if (!fgets(p,BUFSIZ-n,pull_in)) {
-+				t = p;  /* EOF instead of EOL */
-+				break;
-+			    }
-+			    t = p + strlen(p) - 1;
-+			}
-+			while (isdigit(t[-1]))  --t;
-+			where = strtol(t,NULL,10);
-+		    }
-+		    else ignore_this_group = 0;	 /* false */
- 		    if (!skip) {
--			if (is_active(group)) {
-+			if (!ignore_this_group && is_active(group)) {
-+			    unsigned int ok;
- 			    where0 = where;
--			    log_msg(L_DEBUGMORE,"pull group %s",group);
--			    if (!pull_group(group,&where,0)) {
-+			    if (where > 0) {
-+			        log_msg(L_DEBUGMORE,"pull group %s",group);
-+				ok = pull_group(group,&where,0);
-+			    } else {
-+			        /* treat groups with where = 0 as new groups */
-+			        log_msg(L_DEBUGMORE,"pull unseen group %s",group);
-+				ok = pull_group(group,&where,1);
-+			        if (ok)  ++unseen_groups;
-+			    }
-+			    if (!ok) {
- 				fetch_aborted = 1;
- 				skip = 1;
- 				/* continue reading active to clean up things */
- 			    } else if (where0 != where) {
--				++pull_anything;
-+			        ++pull_anything;
- 				fflush(pull_tmp);
- 			    }
- 			} else {
- 			    if (forget_inactive) {
--				/* loose all information about groups
-+				/* delete information about groups
- 				   no longer in active file */
--				log_msg(L_INFO,"group %s no longer active - removed from host list",
--						group);
-+				log_msg(L_INFO,"inactive group %s removed from host list",
-+					group);
- 				group[0] = '\0';
- 				++removed_groups;
- 			    } else {
--				log_msg(L_DEBUGMORE,"group %s not active",group);
-+				log_msg(L_DEBUGMORE,"group %s not active or not read",group);
- 			    }
- 			}
- 		    }
diff --git a/news/newsx/files/patch-ar b/news/newsx/files/patch-ar
deleted file mode 100644
index fbcab734a8b2..000000000000
--- a/news/newsx/files/patch-ar
+++ /dev/null
@@ -1,25 +0,0 @@
---- src/putarticle.c.orig	Mon Apr  5 15:01:51 1999
-+++ src/putarticle.c	Sun Jan 21 11:27:49 2001
-@@ -85,22 +85,6 @@
- 
- static int SM_open = 0;
- 
--#ifndef HAVE_STRTOUL
--/*
-- *  for systems that doesn't have it, assuming base<=10
-- */
--long 
--strtoul(char *str,char **endptr,int base)
--{
--    long u = 0L;
--    char c;
--    while (isspace(*str)) ++str;
--    while (isdigit(c = *str++)) u = u*base + c-'0';
--    *endptr = str;
--    return u;
--}
--#endif
--	
- /*
-  *  check if header tag
-  */
diff --git a/news/newsx/files/patch-as b/news/newsx/files/patch-as
deleted file mode 100644
index 105b9edfd2c4..000000000000
--- a/news/newsx/files/patch-as
+++ /dev/null
@@ -1,44 +0,0 @@
---- src/sim.c.orig	Wed Mar 31 07:53:46 1999
-+++ src/sim.c	Sun Feb 18 15:13:00 2001
-@@ -5,6 +5,9 @@
-  *  that emulates the API to allow consistent handling
-  *
-  *  $Log: sim.c,v $
-+ *  Revision x.xx  2001/02/18
-+ *  Use xmalloc and xrealloc from libinn.h + std_error (<thierry@thomas.as>)
-+ *
-  *  Revision 1.2  1999/03/31 05:53:46  src
-  *  Seperated MAXHEADERSIZE from NNTP_STRLEN
-  *
-@@ -46,11 +49,12 @@
-     SMerrorstr = NULL;
- 
-     if ((fp = fopen(name, "r")) == NULL) {
--	SMerrorstr = strerror(errno);
-+	SMerrorstr = str_error(errno);
- 	return 0;
-     }
- 
--    line = art = xmalloc(alloc_len);
-+/* xmalloc from libinn (<thierry@thomas.as>) */
-+    line = art = xmalloc(alloc_len,"sim.c",57);
-     art_len = 0;
- 
-     for (;;) {
-@@ -106,14 +110,14 @@
-     line += 3;
- 
-     if (ferror(fp)) {
--	SMerrorstr = strerror(errno);
-+	SMerrorstr = str_error(errno);
- 	fclose(fp);
- 	free(art);
- 	return 0;
-     }
- 
-     /* all set */
--    ap = xmalloc(sizeof(ARTHANDLE));
-+    ap = xmalloc(sizeof(ARTHANDLE),"sim.c",120);
- 
-     ap->data = art;
-     ap->len = line-art;
diff --git a/news/newsx/files/patch-at b/news/newsx/files/patch-at
deleted file mode 100644
index 294180442e80..000000000000
--- a/news/newsx/files/patch-at
+++ /dev/null
@@ -1,11 +0,0 @@
---- src/statistics.c.orig	Thu Apr  1 22:56:59 1999
-+++ src/statistics.c	Wed Jan 24 15:42:54 2001
-@@ -117,7 +117,7 @@
- 
- 	if (ftell(f) == 0L) {
- 	    fprintf(f,
--	    "# post fetc dupl alre hist miss grps ua-g us-g grossbyt netbytes totaltim fail\n");
-+	    "# post fetc dupl alre hist miss grps ua-g us-g grossbyt netbytes totaltim fail bnce\n");
- 	}
- 	fprintf(f,     
- 	    "T %s %s",
diff --git a/news/newsx/files/patch-au b/news/newsx/files/patch-au
deleted file mode 100644
index d32ba98089c2..000000000000
--- a/news/newsx/files/patch-au
+++ /dev/null
@@ -1,9 +0,0 @@
---- ChangeLog.orig	Sun Apr 25 03:04:51 1999
-+++ ChangeLog	Fri Feb  9 02:20:49 2001
-@@ -1,3 +1,6 @@
-+02/2001 (WBE): several bugs fixed; a few minor changes; documentation
-+   improvements.  No response from bug-newsx or Egil to patches sent in.
-+
- Update of /home/cvs/newsx
- In directory big:/usr/src/newsx
- 
diff --git a/news/newsx/files/patch-av b/news/newsx/files/patch-av
deleted file mode 100644
index d9f3eeacbb10..000000000000
--- a/news/newsx/files/patch-av
+++ /dev/null
@@ -1,48 +0,0 @@
---- src/util.c.orig	Wed Apr  7 10:02:11 1999
-+++ src/util.c	Sun Feb 18 13:42:53 2001
-@@ -6,6 +6,9 @@
-  *  the GNU General Public License applies
-  *
-  *  $Log: util.c,v $
-+ *  Revision x.xx  2001/02/11
-+ *  Use xmalloc and xrealloc from libinn.h (<thierry@thomas.as>)
-+ *
-  *  Revision 1.14  1999/04/07 08:02:11  src
-  *  Implemented --profile
-  *
-@@ -188,7 +191,6 @@
- 
- /*
-  *  memory allocation - never fail
-- */
- void *
- xmalloc(unsigned int size)
- {  
-@@ -200,10 +202,10 @@
-     }
-     return p;
- }
-+ */
- 
- /*
-  *  memory reallocation - never fail
-- */
- void *
- xrealloc(void *p,unsigned int size)
- {  
-@@ -213,6 +215,7 @@
-     }
-     return p;
- }
-+ */
- 
- /*
-  *  string allocate and copy - never fail
-@@ -220,5 +223,6 @@
- char *
- xstrcpy(const char *str)
- {  
--    return strcpy(xmalloc(strlen(str)+1),str);
-+/* xmalloc from libinn (<thierry@thomas.as>) */
-+    return strcpy(xmalloc(strlen(str)+1,"util.c", 228),str);
- }
diff --git a/news/newsx/files/patch-aw b/news/newsx/files/patch-aw
deleted file mode 100644
index 44931077c2c0..000000000000
--- a/news/newsx/files/patch-aw
+++ /dev/null
@@ -1,29 +0,0 @@
---- src/telnet.c.orig	Wed Mar 31 07:53:46 1999
-+++ src/telnet.c	Mon Feb 12 21:31:37 2001
-@@ -6,6 +6,9 @@
-  *  the GNU General Public License applies
-  *
-  *  $Log: telnet.c,v $
-+ *  Revision x.xx  2001/02/11
-+ *  Use xmalloc and xrealloc from libinn.h (<thierry@thomas.as>)
-+ *
-  *  Revision 1.9  1999/03/31 05:53:46  src
-  *  Seperated MAXHEADERSIZE from NNTP_STRLEN
-  *
-@@ -26,6 +29,7 @@
- #include "proto.h"
- #include "nntp.h"
- #include "news.h" /* MAXHEADERSIZE */
-+#include "libinn.h"
- 
- #include <signal.h>
- #include <setjmp.h>
-@@ -161,7 +165,7 @@
-     static int buf_m = 0;
-     static int not_first_time = 0;
- 
--    if (!buf) buf = xmalloc(MAXHEADERSIZE);
-+    if (!buf) buf = xmalloc(MAXHEADERSIZE,"telnet.c",168);
- 
-     if (!not_first_time) {
- 	not_first_time = 1;
diff --git a/news/newsx/files/patch-ax b/news/newsx/files/patch-ax
deleted file mode 100644
index dbe75a724ce0..000000000000
--- a/news/newsx/files/patch-ax
+++ /dev/null
@@ -1,34 +0,0 @@
---- src/common.h.orig	Sat Apr 17 09:11:26 1999
-+++ src/common.h	Sun Feb 18 11:11:13 2001
-@@ -6,6 +6,9 @@
-  *  the GNU General Public License applies
-  *
-  *  $Log: common.h,v $
-+ *  Revision x.xx  2001/02/11
-+ *  NNTP_PORT already defined in config.h from libinn.h (<thierry@thomas.as>)
-+ *
-  *  Revision 1.17  1999/04/17 07:11:26  src
-  *  malloc.h inclusion
-  *
-@@ -58,6 +61,10 @@
- #include <ctype.h>
- #include <errno.h>
- 
-+#ifndef __LIBINN_H__
-+#  include "libinn.h"
-+#endif
-+
- #if STDC_HEADERS
- #  include <stdlib.h>
- #  include <string.h>
-@@ -131,7 +138,9 @@
- char *hostport;                 /* port for NNTP server */
- char *pname;                    /* this program */
- char *spooldir;                 /* news spool */
--#define NNTP_PORT "nntp"
-+#ifndef NNTP_PORT
-+ #define NNTP_PORT "nntp"
-+#endif
- 
- /* 
-  *  misc status
diff --git a/news/newsx/files/patch-ay b/news/newsx/files/patch-ay
deleted file mode 100644
index 2fd44f14cce5..000000000000
--- a/news/newsx/files/patch-ay
+++ /dev/null
@@ -1,36 +0,0 @@
---- src/proto.h.orig	Mon Apr 19 05:32:39 1999
-+++ src/proto.h	Sun Feb 11 19:19:59 2001
-@@ -6,6 +6,9 @@
-  *  the GNU General Public License applies
-  *
-  *  $Log: proto.h,v $
-+ *  Revision x.xx  2001/02/11
-+ *  Use xmalloc, xrealloc and wildmat from libinn.h (<thierry@thomas.as>)
-+ *
-  *  Revision 1.31  1999/04/19 03:32:39  src
-  *  Standard profile in $PATHETC/newsx.conf
-  *
-@@ -133,10 +136,12 @@
- text_time(time_t t);
- char *
- skipsp(char *p);
-+/* See libinn.h
- void *
- xmalloc(unsigned int size);
- void * 
- xrealloc(void *p,unsigned int size);
-+*/
- char *
- xstrcpy(const char *str);
- 
-@@ -289,8 +294,10 @@
- progtitle2(char *what,char *more);
- 
- /* wildmat.c */
-+/* from libinn.h
- int 
- wildmat(char *text, char *p);
-+*/
- 
- /* bounce.c */
- int  
diff --git a/news/newsx/files/patch-az b/news/newsx/files/patch-az
deleted file mode 100644
index 553da2ad0b89..000000000000
--- a/news/newsx/files/patch-az
+++ /dev/null
@@ -1,11 +0,0 @@
---- src/libinn.h.orig	Mon Aug 21 08:14:43 2000
-+++ src/libinn.h	Thu Feb 15 21:52:47 2001
-@@ -7,7 +7,7 @@
- 
- /* We've probably already included this; only include it if we need it. */
- #ifndef __CONFIG_H__
--# include "config.h"
-+# include "../lib/config.h"
- #endif
- 
- #include <stdio.h>
diff --git a/news/newsx/files/patch-ba b/news/newsx/files/patch-ba
deleted file mode 100644
index 170508d152ed..000000000000
--- a/news/newsx/files/patch-ba
+++ /dev/null
@@ -1,23 +0,0 @@
---- dbz/configdata.h.orig	Sun Mar  7 16:41:31 1999
-+++ dbz/configdata.h	Sun Feb 18 11:57:39 2001
-@@ -3,6 +3,9 @@
-  *  extracted from INN version 2.0
-  *
-  *  $Log: configdata.h,v $
-+ *  Revision x.x  2001/02/18 <thierry@thomas.as>
-+ *  BOOL already defined (no more configdata.h in inn 2.3)
-+ *
-  *  Revision 1.7  1999/03/07 15:41:31  src
-  *  Removed DBZ_VERSION from configuration
-  *
-@@ -22,7 +25,9 @@
- #include "proto.h"
- #include "../config.h"
- 
--typedef int BOOL;
-+#ifndef __CONFIG_H__
-+  typedef int BOOL;
-+#endif
- #ifndef TRUE
- #define TRUE 1
- #endif
diff --git a/news/newsx/files/patch-bb b/news/newsx/files/patch-bb
deleted file mode 100644
index afdc4abe77b9..000000000000
--- a/news/newsx/files/patch-bb
+++ /dev/null
@@ -1,22 +0,0 @@
---- src/sys.c.orig	Sat Apr 24 20:13:31 1999
-+++ src/sys.c	Sun Feb 18 13:39:54 2001
-@@ -6,6 +6,9 @@
-  *  the GNU General Public License applies
-  *
-  *  $Log: sys.c,v $
-+ *  Revision x.xx  2001/02/18
-+ *  Use xmalloc and xrealloc from libinn.h (<thierry@thomas.as>)
-+ *
-  *  Revision 1.23  1999/04/24 18:13:31  src
-  *  Allowing '@' in newsfeeds syntax, making a special case of it
-  *  in the group list
-@@ -96,7 +99,8 @@
- 
-     n = sizeof(SYS_GRP) + strlen(group);
- 
--    sp = xmalloc(n);
-+/* xmalloc from libinn (<thierry@thomas.as>) */
-+    sp = xmalloc(n,"sys.c",101);
- 
-     /* fill in structure */
-     sp->next = 0; 
diff --git a/news/newsx/files/patch-bc b/news/newsx/files/patch-bc
deleted file mode 100644
index 0a08f6cb8bf3..000000000000
--- a/news/newsx/files/patch-bc
+++ /dev/null
@@ -1,22 +0,0 @@
---- src/active.c.orig	Tue Mar 16 09:12:46 1999
-+++ src/active.c	Sun Feb 18 14:26:47 2001
-@@ -6,6 +6,9 @@
-  *  the GNU General Public License applies
-  *
-  *  $Log: active.c,v $
-+ *  Revision x.xx  2001/02/18
-+ *  Use xmalloc and xrealloc from libinn.h (<thierry@thomas.as>)
-+ *
-  *  Revision 1.12  1999/03/16 08:12:46  src
-  *  Moved clean_active() to active.c
-  *
-@@ -82,7 +85,8 @@
-     /* BUG: check if already? */
-     n = sizeof(ACTIVE_GRP) + strlen(group);
- 
--    ap = xmalloc(n);
-+/* xmalloc from libinn (<thierry@thomas.as>) */
-+    ap = xmalloc(n,"active.c",89);
- 
-     /* add to list of active groups at that hashindex */
-     ap->seen = 0;
diff --git a/news/newsx/files/patch-bd b/news/newsx/files/patch-bd
deleted file mode 100644
index d03bf6e2bf0c..000000000000
--- a/news/newsx/files/patch-bd
+++ /dev/null
@@ -1,23 +0,0 @@
---- src/msgid.c.orig	Sun Mar  7 15:58:18 1999
-+++ src/msgid.c	Sun Feb 18 14:33:18 2001
-@@ -7,6 +7,9 @@
-  *  the GNU General Public License applies
-  *
-  *  $Log: msgid.c,v $
-+ *  Revision x.xx  2001/02/18
-+ *  Use xmalloc and xrealloc from libinn.h (<thierry@thomas.as>)
-+ *
-  *  Revision 1.6  1999/03/07 14:58:18  src
-  *  Read newsconfig supported. Storage API supported.
-  *
-@@ -53,7 +56,9 @@
- 
-     /* add to list */
-     n = sizeof(MESSAGE_ID) + strlen(msgid);
--    mp = xmalloc(n);
-+
-+/* xmalloc from libinn (<thierry@thomas.as>) */
-+    mp = xmalloc(n,"msgid.c",61);
-     strcpy(mp->name,msgid);
-     mp->next = messageids[h];
-     messageids[h] = mp;
diff --git a/news/newsx/files/patch-be b/news/newsx/files/patch-be
deleted file mode 100644
index a1195526e8a6..000000000000
--- a/news/newsx/files/patch-be
+++ /dev/null
@@ -1,42 +0,0 @@
---- src/split.c.orig	Sun Apr 25 09:02:03 1999
-+++ src/split.c	Sun Feb 18 14:43:14 2001
-@@ -6,6 +6,9 @@
-  *  the GNU General Public License applies
-  *
-  *  $Log: split.c,v $
-+ *  Revision x.xx  2001/02/18
-+ *  Use xmalloc and xrealloc from libinn.h (<thierry@thomas.as>)
-+ *
-  *  Revision 1.1  1999/04/25 07:02:03  src
-  *  Added to CVS, it was omitted by mistake
-  *
-@@ -31,7 +34,8 @@
-     char **argv;
-     int argc_max = 100;
- 
--    argv = xmalloc(argc_max*sizeof(char *));
-+/* xmalloc from libinn (<thierry@thomas.as>) */
-+    argv = xmalloc(argc_max*sizeof(char *),"split.c",38);
- 
-     /* program name */
-     argv[argc++] = pname;
-@@ -46,7 +50,8 @@
- 	    if (start) {
- 		if (argc >= argc_max-3) {
- 		    argc_max += 100;
--		    argv = xrealloc(argv, argc_max*sizeof(char *));
-+/* xmalloc from libinn (<thierry@thomas.as>) */
-+		    argv = xrealloc(argv, argc_max*sizeof(char *),"split.c",54);
- 		}
- 		argv[argc++] = start;
- 	    }
-@@ -112,7 +117,8 @@
- 	exit_cleanup(8);
-     }
- 
--    buf = xmalloc(size+1);
-+/* xmalloc from libinn (<thierry@thomas.as>) */
-+    buf = xmalloc(size+1,"split.c",121);
-     buf[size] = '\0';
- 
-     /* load local sys file */
diff --git a/news/newsx/files/patch-bf b/news/newsx/files/patch-bf
deleted file mode 100644
index d7956200e572..000000000000
--- a/news/newsx/files/patch-bf
+++ /dev/null
@@ -1,22 +0,0 @@
---- src/path.c.orig	Wed Mar 24 04:53:00 1999
-+++ src/path.c	Sun Feb 18 14:56:26 2001
-@@ -6,6 +6,9 @@
-  *  the GNU General Public License applies
-  *
-  *  $Log: path.c,v $
-+ *  Revision x.xx  2001/02/18
-+ *  Use xmalloc and xrealloc from libinn.h (<thierry@thomas.as>)
-+ *
-  *  Revision 1.3  1999/03/24 03:53:00  src
-  *  Implemented "newsx" as magic exclude pattern
-  *
-@@ -40,7 +43,8 @@
- 
-     if (PATH_DEBUG) fprintf(stderr,"Add exclusion: %s\n",path);
- 
--    e = xmalloc(sizeof(struct ex_s));
-+/* xmalloc from libinn (<thierry@thomas.as>) */
-+    e = xmalloc(sizeof(struct ex_s),"path.c",47);
-     e->e_next = exclusion;
-     e->e_name = xstrcpy(path);
-     exclusion = e;
diff --git a/news/newsx/files/patch-bg b/news/newsx/files/patch-bg
deleted file mode 100644
index 314ffc707aa0..000000000000
--- a/news/newsx/files/patch-bg
+++ /dev/null
@@ -1,22 +0,0 @@
---- src/config.c.orig	Mon Apr 19 05:32:38 1999
-+++ src/config.c	Sun Feb 18 15:03:48 2001
-@@ -12,6 +12,9 @@
-  *  the GNU General Public License applies
-  *
-  *  $Log: config.c,v $
-+ *  Revision x.xx  2001/02/18
-+ *  Use xmalloc and xrealloc from libinn.h (<thierry@thomas.as>)
-+ *
-  *  Revision 1.10  1999/04/19 03:32:38  src
-  *  Standard profile in $PATHETC/newsx.conf
-  *
-@@ -100,7 +103,8 @@
-     /* BUG: check if already? */
-     n = sizeof(CONFIG_S) + strlen(val);
- 
--    cp = xmalloc(n);
-+/* xmalloc from libinn (<thierry@thomas.as>) */
-+    cp = xmalloc(n,"config.c",107);
- 
-     /* add to list of config tags at that hashindex */
-     strcpy(cp->name,tag);
diff --git a/news/newsx/files/patch-bh b/news/newsx/files/patch-bh
deleted file mode 100644
index 41cb5c421049..000000000000
--- a/news/newsx/files/patch-bh
+++ /dev/null
@@ -1,10 +0,0 @@
---- test/Makefile.am.orig	Mon Apr  5 21:01:56 1999
-+++ test/Makefile.am	Fri Mar  2 23:01:01 2001
-@@ -37,5 +37,6 @@
- INCLUDES = -I../src
- 
- LDADD = ../src/filter.o ../src/socket.o ../src/logmsg.o ../src/telnet.o \
--	../src/title.o ../src/exec.o ../src/script.o ../src/util.o
-+	../src/title.o ../src/exec.o ../src/script.o ../src/util.o \
-+	-L/usr/local/news/lib -lstorage ../dbz/libdbzv3.a ../lib/libgetopt.a -linn -lstorage
- 
diff --git a/news/newsx/files/patch-bi b/news/newsx/files/patch-bi
deleted file mode 100644
index 4bdab4b9c75d..000000000000
--- a/news/newsx/files/patch-bi
+++ /dev/null
@@ -1,41 +0,0 @@
---- lib/config.h.orig	Sun Nov  5 01:15:51 2000
-+++ lib/config.h	Sun Mar  4 18:06:56 2001
-@@ -1,6 +1,7 @@
- /* include/config.h.  Generated automatically by configure.  */
- /* include/config.h.in.  Generated automatically from configure.in by autoheader.  */
- /*  $Revision: 1.64.2.4 $
-+**	+ patch for newsx - some #ifndef <thierry@thomas.as>
- **
- **  Here be configuration data used by various InterNetNews programs.  This
- **  file is used as source for the autoheader script, which from it and
-@@ -103,7 +104,7 @@
- #define NNRP_LOADLIMIT          16
- 
- /* The standard NNTP port. */
--#define NNTP_PORT               119
-+#define NNTP_PORT               "nntp"
- 
- /* What to use for a Path tail for local posts. */
- #define PATHMASTER              "not-for-mail"
-@@ -253,7 +254,9 @@
- #define NEWSMASTER "usenet"
- 
- /* The umask used by all INN programs. */
--#define NEWSUMASK 02
-+#ifndef NEWSUMASK
-+  #define NEWSUMASK 02
-+#endif
- 
- /* The username and group name that INN should run under. */
- #define NEWSUSER "news"
-@@ -546,7 +549,9 @@
-    size for some header parsing code.  This is currently also used by innd
-    to determine whether to reject a message for an excessively long header;
-    this behavior should be fixed. */
--#define MAXHEADERSIZE           1024
-+#ifndef MAXHEADERSIZE
-+  #define MAXHEADERSIZE           1024
-+#endif
- 
- /* Default buffer size for outgoing feeds from innd. */
- #define SITE_BUFFER_SIZE        (16 * 1024)
diff --git a/news/newsx/files/patch-bj b/news/newsx/files/patch-bj
deleted file mode 100644
index ce0d978f432e..000000000000
--- a/news/newsx/files/patch-bj
+++ /dev/null
@@ -1,23 +0,0 @@
---- src/news.h.orig	Mon Apr 19 06:20:08 1999
-+++ src/news.h	Sun Feb 18 21:53:09 2001
-@@ -8,6 +8,9 @@
-  *  NOTE: shouldn't normally need to change these
-  *
-  *  $Log: news.h,v $
-+ *  Revision x.x   2001/02/18 <thierry@thomas.as>
-+ *  Some ifndef.
-+ *
-  *  Revision 1.15  1999/04/19 04:20:08  src
-  *  Profile for specific spool
-  *
-@@ -46,7 +49,9 @@
-  *  length of a news header line
-  *  not to be confused with NNTP_STRLEN
-  */
--#define MAXHEADERSIZE  5120
-+#ifndef MAXHEADERSIZE
-+  #define MAXHEADERSIZE  5120
-+#endif
- 
- /* 
-  *  lock between newsxes accessing same host
diff --git a/news/newsx/files/patch-bk b/news/newsx/files/patch-bk
deleted file mode 100644
index c67b2fd43036..000000000000
--- a/news/newsx/files/patch-bk
+++ /dev/null
@@ -1,11 +0,0 @@
---- src/getarticle.c.orig	Sun Apr 18 11:28:45 1999
-+++ src/getarticle.c	Sat Mar  3 17:49:03 2001
-@@ -292,7 +292,7 @@
- 	if (a != where) {
- 	    if (a==0 && window <= 1) {
- 		/* OK, we'll allow it - presumably a non-conforming server */
--		static told = 0;
-+		static int told = 0;
- 		if (!told) {
- 		    log_msg(L_INFO,"no article number in ARTICLE response: %s",
- 								       status);
diff --git a/news/newsx/files/patch-bl b/news/newsx/files/patch-bl
deleted file mode 100644
index a06babe427ed..000000000000
--- a/news/newsx/files/patch-bl
+++ /dev/null
@@ -1,34 +0,0 @@
---- src/history.c.orig	Thu Apr  8 12:56:13 1999
-+++ src/history.c	Sun Sep  9 14:00:33 2001
-@@ -6,6 +6,12 @@
-  *  the GNU General Public License applies
-  *
-  *  $Log: history.c,v $
-+ *
-+ *  Revision x.xx  2001/09/09
-+ *  patch from G. Paul Ziemba to fix the return of dbzfetch
-+ *  when inn is built with tagged-hash enabled
-+ *  (applied by thierry@thomas.as).
-+ *
-  *  Revision 1.19  1999/04/08 10:56:13  src
-  *  *** empty log message ***
-  *
-@@ -142,6 +148,9 @@
- 	OFFSET_T offset;
- #  ifdef DO_TAGGED_HASH
- 	offset = dbzfetch(key);
-+	if (!offset) {	/* gpz 010907 start */
-+		offset = -1;
-+	}		/* gpz 010907 end */
- #  else
- 	idxrec ionevalue;
- 	idxrecext iextvalue;
-@@ -161,6 +170,8 @@
- 	    log_msg(L_DEBUGMORE,"msgid %s not in history",msgid);
- 	    return 0;
- 	}
-+	log_msg(L_DEBUGMORE,"dbzver=6, msgid %s IS in history, off=%d",
-+	    msgid, offset);
-     }
-     /* OK, we found it */
-     return 1;
diff --git a/news/newsx/pkg-descr b/news/newsx/pkg-descr
index 97115279c6b6..d1c27a5a982a 100644
--- a/news/newsx/pkg-descr
+++ b/news/newsx/pkg-descr
@@ -13,5 +13,3 @@ configuration file and requires little or no specific configuration, the
 administrative burden should be minimized.
 
 WWW: http://www.kvaleberg.com/newsx.html
-
-- Thierry Thomas <thierry@thomas.as>
diff --git a/news/newsx/pkg-plist b/news/newsx/pkg-plist
index 3f0f131c1f0e..a0339d600165 100644
--- a/news/newsx/pkg-plist
+++ b/news/newsx/pkg-plist
@@ -1,6 +1,5 @@
 bin/newsx
 bin/newsq
-bin/testfilter
 %%PORTDOCS%%share/doc/newsx/AUTHORS
 %%PORTDOCS%%share/doc/newsx/COPYING
 %%PORTDOCS%%share/doc/newsx/ChangeLog