Remove the multiple copies of these files that crept in here. I hate

patch(1).

2 files changed, 0 insertions, 9047 deletions

diff --git a/ports-mgmt/portmk/Mk/bsd.linux-rpm.mk b/ports-mgmt/portmk/Mk/bsd.linux-rpm.mk
index 459178583cb2..97b41a5f7dd9 100644
--- a/ports-mgmt/portmk/Mk/bsd.linux-rpm.mk
+++ b/ports-mgmt/portmk/Mk/bsd.linux-rpm.mk
@@ -88,8553 +88,3 @@ new-plist:
 .  endif
 
 .endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
-#-*- mode: Makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-
-.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
-
-Linux_RPM_Include_MAINTAINER=	jylefort@FreeBSD.org
-Linux_RPM_Pre_Include=			bsd.linux-rpm.mk
-
-RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
-
-EXTRACT_SUFX?=		.${LINUX_RPM_ARCH}.rpm
-
-USE_LINUX?=			yes
-USE_LINUX_PREFIX=	yes
-
-NO_WRKSUBDIR=		yes
-NO_BUILD=			yes
-
-.  if ${ARCH} == "amd64"
-LINUX_RPM_ARCH?=	i386	# the linuxulator does not yet support amd64 code
-.  elif ${ARCH} == "powerpc"
-LINUX_RPM_ARCH?=	ppc
-.  else
-LINUX_RPM_ARCH?=	${ARCH}
-.  endif
-
-.endif
-
-.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
-
-Linux_RPM_Post_Include=	bsd.linux-rpm.mk
-
-MASTER_SITES?=			${MASTER_SITE_FEDORA_LINUX}
-MASTER_SITE_SUBDIR?=	3/${LINUX_RPM_ARCH}/os/Fedora/RPMS/
-PKGNAMEPREFIX?=			linux-
-
-EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
-
-EXTRACT_CMD?=			${RPM2CPIO}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=	| ${CPIO} -id --quiet
-
-MD5_FILE?=				${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
-
-.  if defined(AUTOMATIC_PLIST)
-
-.    if ${USE_LINUX} == "8" || ${USE_LINUX:L} == "yes"
-_LINUX_BASE_SUFFIX=		8
-.    elif ${USE_LINUX} == "debian"
-_LINUX_BASE_SUFFIX=		debian
-.    else
-# other linux_base ports do not provide a pkg-plist file
-IGNORE=					"uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"8\" and \"debian\""
-.    endif
-
-PLIST?=					${WRKDIR}/.PLIST.linux-rpm
-
-pre-install: linux-rpm-generate-plist
-
-linux-rpm-generate-plist:
-	@cd ${WRKSRC} && \
-	${FIND} * ! -type d | ${SORT} > ${PLIST} && \
-	${FIND} * -type d | ${SORT} | ${SED} -e 's|^|@dirrm |' > ${PLIST}.dirs
-	@${GREP} '^@dirrm ' ${PORTSDIR}/emulators/linux_base-${_LINUX_BASE_SUFFIX}/pkg-plist | ${SORT} > ${PLIST}.shared-dirs
-	@${COMM} -1 -3 ${PLIST}.shared-dirs ${PLIST}.dirs | ${SORT} -r >> ${PLIST}
-
-.  endif
-
-.  if !target(do-install)
-do-install:
-	cd ${WRKSRC} && ${FIND} * -type d -exec ${MKDIR} "${PREFIX}/{}" \;
-	cd ${WRKSRC} && ${FIND} * ! -type d | ${CPIO} -pm -R root:wheel ${PREFIX}
-.  endif
-
-.  if !target(new-plist)
-new-plist:
-	@${RM} -rf ${WRKDIR}/.new-plist
-	@${MKDIR} ${WRKDIR}/.new-plist
-	@cd ${WRKDIR}/.new-plist && \
-	for f in ${DISTFILES}; do \
-		${RPM2CPIO} ${_DISTDIR}/$$f | ${CPIO} -id --quiet; \
-		${FIND} * ! type d | ${SORT} > ${PLIST}.new; \
-		${FIND} -d * -type d | ${SED} -e 's|^|@dirrm |' >> ${PLIST}.new; \
-	done
-.  endif
-
-.endif
diff --git a/ports-mgmt/portmk/Mk/bsd.mail.mk b/ports-mgmt/portmk/Mk/bsd.mail.mk
index 6a48710d3c62..df7bc292e0b0 100644
--- a/ports-mgmt/portmk/Mk/bsd.mail.mk
+++ b/ports-mgmt/portmk/Mk/bsd.mail.mk
@@ -69,500 +69,3 @@ BUILD_DEPENDS+=	${QMAIL_DEPENDS}
 ## End QMAIL Stuff
 
 .endif
-#-*- mode: Fundamental; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-# Please view me with 4 column tabs!
-
-.if !defined(_POSTMKINCLUDED) && !defined(Mail_Pre_Include)
-
-# Please make sure all changes to this file are passed through the maintainer.
-# Do not commit them yourself (unless of course you're the Port's Wraith ;).
-Mail_Include_MAINTAINER=	garga@FreeBSD.org
-Mail_Pre_Include=			bsd.mail.mk
-
-
-## Begin QMAIL Stuff
-
-# Ports can use the following vars:
-#
-# QMAIL_PREFIX		- Define it if qmail is installed in a different PREFIX.
-#			  Default: /var/qmail
-#
-# QMAIL_SLAVEPORT	- Define it if you install a slaveport of qmail, to
-#			  prevent stale dependencies. Valid slaveports are:
-#			  ldap, mysql, smtp_auth+tls, spamcontrol and tls.
-#
-# USE_QMAIL_BUILD	- Add qmail or qmail slaveport to BUILD_DEPENDS.
-#
-# USE_QMAIL_RUN		- Add qmail or qmail slaveport to RUN_DEPENDS.
-#
-# USE_QMAIL		- Add qmail or qmail slaveport to RUN and BUILD_DEPENDS.
-#
-# WANT_QMAIL		- Set vars related to qmail, like QMAIL_PREFIX.
-
-QMAIL_PREFIX?=	/var/qmail
-
-_QMAIL_VALID_SLAVEPORTS=	ldap mysql smtp_auth+tls spamcontrol tls
-
-.if defined(USE_QMAIL) || defined(USE_QMAIL_RUN) || defined (USE_QMAIL_BUILD)
-
-.if defined(QMAIL_SLAVEPORT)
-.	for slave in ${_QMAIL_VALID_SLAVEPORTS}
-.		if ${QMAIL_SLAVEPORT:L} == ${slave}
-_QMAIL_SLAVEPORT_OKAY=	true
-.		endif
-.	endfor
-
-.	if !defined(_QMAIL_SLAVEPORT_OKAY)
-IGNORE=	"Invalid QMAIL_SLAVEPORT value. Only one can be set, valid values are: ${_QMAIL_VALID_SLAVEPORTS}"
-.	endif
-.endif
-
-.if defined(QMAIL_SLAVEPORT)
-QMAIL_DEPENDS=	${QMAIL_PREFIX}/bin/qmail-send:${PORTSDIR}/mail/qmail-${QMAIL_SLAVEPORT:L}
-.else
-QMAIL_DEPENDS=	${QMAIL_PREFIX}/bin/qmail-send:${PORTSDIR}/mail/qmail
-.endif
-
-.if defined(USE_QMAIL) || defined(USE_QMAIL_RUN)
-RUN_DEPENDS+=	${QMAIL_DEPENDS}
-.endif
-
-.if defined(USE_QMAIL) || defined(USE_QMAIL_BUILD)
-BUILD_DEPENDS+=	${QMAIL_DEPENDS}
-.endif
-
-.endif
-
-## End QMAIL Stuff
-
-.endif
-#-*- mode: Fundamental; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-# Please view me with 4 column tabs!
-
-.if !defined(_POSTMKINCLUDED) && !defined(Mail_Pre_Include)
-
-# Please make sure all changes to this file are passed through the maintainer.
-# Do not commit them yourself (unless of course you're the Port's Wraith ;).
-Mail_Include_MAINTAINER=	garga@FreeBSD.org
-Mail_Pre_Include=			bsd.mail.mk
-
-
-## Begin QMAIL Stuff
-
-# Ports can use the following vars:
-#
-# QMAIL_PREFIX		- Define it if qmail is installed in a different PREFIX.
-#			  Default: /var/qmail
-#
-# QMAIL_SLAVEPORT	- Define it if you install a slaveport of qmail, to
-#			  prevent stale dependencies. Valid slaveports are:
-#			  ldap, mysql, smtp_auth+tls, spamcontrol and tls.
-#
-# USE_QMAIL_BUILD	- Add qmail or qmail slaveport to BUILD_DEPENDS.
-#
-# USE_QMAIL_RUN		- Add qmail or qmail slaveport to RUN_DEPENDS.
-#
-# USE_QMAIL		- Add qmail or qmail slaveport to RUN and BUILD_DEPENDS.
-#
-# WANT_QMAIL		- Set vars related to qmail, like QMAIL_PREFIX.
-
-QMAIL_PREFIX?=	/var/qmail
-
-_QMAIL_VALID_SLAVEPORTS=	ldap mysql smtp_auth+tls spamcontrol tls
-
-.if defined(USE_QMAIL) || defined(USE_QMAIL_RUN) || defined (USE_QMAIL_BUILD)
-
-.if defined(QMAIL_SLAVEPORT)
-.	for slave in ${_QMAIL_VALID_SLAVEPORTS}
-.		if ${QMAIL_SLAVEPORT:L} == ${slave}
-_QMAIL_SLAVEPORT_OKAY=	true
-.		endif
-.	endfor
-
-.	if !defined(_QMAIL_SLAVEPORT_OKAY)
-IGNORE=	"Invalid QMAIL_SLAVEPORT value. Only one can be set, valid values are: ${_QMAIL_VALID_SLAVEPORTS}"
-.	endif
-.endif
-
-.if defined(QMAIL_SLAVEPORT)
-QMAIL_DEPENDS=	${QMAIL_PREFIX}/bin/qmail-send:${PORTSDIR}/mail/qmail-${QMAIL_SLAVEPORT:L}
-.else
-QMAIL_DEPENDS=	${QMAIL_PREFIX}/bin/qmail-send:${PORTSDIR}/mail/qmail
-.endif
-
-.if defined(USE_QMAIL) || defined(USE_QMAIL_RUN)
-RUN_DEPENDS+=	${QMAIL_DEPENDS}
-.endif
-
-.if defined(USE_QMAIL) || defined(USE_QMAIL_BUILD)
-BUILD_DEPENDS+=	${QMAIL_DEPENDS}
-.endif
-
-.endif
-
-## End QMAIL Stuff
-
-.endif
-#-*- mode: Fundamental; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-# Please view me with 4 column tabs!
-
-.if !defined(_POSTMKINCLUDED) && !defined(Mail_Pre_Include)
-
-# Please make sure all changes to this file are passed through the maintainer.
-# Do not commit them yourself (unless of course you're the Port's Wraith ;).
-Mail_Include_MAINTAINER=	garga@FreeBSD.org
-Mail_Pre_Include=			bsd.mail.mk
-
-
-## Begin QMAIL Stuff
-
-# Ports can use the following vars:
-#
-# QMAIL_PREFIX		- Define it if qmail is installed in a different PREFIX.
-#			  Default: /var/qmail
-#
-# QMAIL_SLAVEPORT	- Define it if you install a slaveport of qmail, to
-#			  prevent stale dependencies. Valid slaveports are:
-#			  ldap, mysql, smtp_auth+tls, spamcontrol and tls.
-#
-# USE_QMAIL_BUILD	- Add qmail or qmail slaveport to BUILD_DEPENDS.
-#
-# USE_QMAIL_RUN		- Add qmail or qmail slaveport to RUN_DEPENDS.
-#
-# USE_QMAIL		- Add qmail or qmail slaveport to RUN and BUILD_DEPENDS.
-#
-# WANT_QMAIL		- Set vars related to qmail, like QMAIL_PREFIX.
-
-QMAIL_PREFIX?=	/var/qmail
-
-_QMAIL_VALID_SLAVEPORTS=	ldap mysql smtp_auth+tls spamcontrol tls
-
-.if defined(USE_QMAIL) || defined(USE_QMAIL_RUN) || defined (USE_QMAIL_BUILD)
-
-.if defined(QMAIL_SLAVEPORT)
-.	for slave in ${_QMAIL_VALID_SLAVEPORTS}
-.		if ${QMAIL_SLAVEPORT:L} == ${slave}
-_QMAIL_SLAVEPORT_OKAY=	true
-.		endif
-.	endfor
-
-.	if !defined(_QMAIL_SLAVEPORT_OKAY)
-IGNORE=	"Invalid QMAIL_SLAVEPORT value. Only one can be set, valid values are: ${_QMAIL_VALID_SLAVEPORTS}"
-.	endif
-.endif
-
-.if defined(QMAIL_SLAVEPORT)
-QMAIL_DEPENDS=	${QMAIL_PREFIX}/bin/qmail-send:${PORTSDIR}/mail/qmail-${QMAIL_SLAVEPORT:L}
-.else
-QMAIL_DEPENDS=	${QMAIL_PREFIX}/bin/qmail-send:${PORTSDIR}/mail/qmail
-.endif
-
-.if defined(USE_QMAIL) || defined(USE_QMAIL_RUN)
-RUN_DEPENDS+=	${QMAIL_DEPENDS}
-.endif
-
-.if defined(USE_QMAIL) || defined(USE_QMAIL_BUILD)
-BUILD_DEPENDS+=	${QMAIL_DEPENDS}
-.endif
-
-.endif
-
-## End QMAIL Stuff
-
-.endif
-#-*- mode: Fundamental; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-# Please view me with 4 column tabs!
-
-.if !defined(_POSTMKINCLUDED) && !defined(Mail_Pre_Include)
-
-# Please make sure all changes to this file are passed through the maintainer.
-# Do not commit them yourself (unless of course you're the Port's Wraith ;).
-Mail_Include_MAINTAINER=	garga@FreeBSD.org
-Mail_Pre_Include=			bsd.mail.mk
-
-
-## Begin QMAIL Stuff
-
-# Ports can use the following vars:
-#
-# QMAIL_PREFIX		- Define it if qmail is installed in a different PREFIX.
-#			  Default: /var/qmail
-#
-# QMAIL_SLAVEPORT	- Define it if you install a slaveport of qmail, to
-#			  prevent stale dependencies. Valid slaveports are:
-#			  ldap, mysql, smtp_auth+tls, spamcontrol and tls.
-#
-# USE_QMAIL_BUILD	- Add qmail or qmail slaveport to BUILD_DEPENDS.
-#
-# USE_QMAIL_RUN		- Add qmail or qmail slaveport to RUN_DEPENDS.
-#
-# USE_QMAIL		- Add qmail or qmail slaveport to RUN and BUILD_DEPENDS.
-#
-# WANT_QMAIL		- Set vars related to qmail, like QMAIL_PREFIX.
-
-QMAIL_PREFIX?=	/var/qmail
-
-_QMAIL_VALID_SLAVEPORTS=	ldap mysql smtp_auth+tls spamcontrol tls
-
-.if defined(USE_QMAIL) || defined(USE_QMAIL_RUN) || defined (USE_QMAIL_BUILD)
-
-.if defined(QMAIL_SLAVEPORT)
-.	for slave in ${_QMAIL_VALID_SLAVEPORTS}
-.		if ${QMAIL_SLAVEPORT:L} == ${slave}
-_QMAIL_SLAVEPORT_OKAY=	true
-.		endif
-.	endfor
-
-.	if !defined(_QMAIL_SLAVEPORT_OKAY)
-IGNORE=	"Invalid QMAIL_SLAVEPORT value. Only one can be set, valid values are: ${_QMAIL_VALID_SLAVEPORTS}"
-.	endif
-.endif
-
-.if defined(QMAIL_SLAVEPORT)
-QMAIL_DEPENDS=	${QMAIL_PREFIX}/bin/qmail-send:${PORTSDIR}/mail/qmail-${QMAIL_SLAVEPORT:L}
-.else
-QMAIL_DEPENDS=	${QMAIL_PREFIX}/bin/qmail-send:${PORTSDIR}/mail/qmail
-.endif
-
-.if defined(USE_QMAIL) || defined(USE_QMAIL_RUN)
-RUN_DEPENDS+=	${QMAIL_DEPENDS}
-.endif
-
-.if defined(USE_QMAIL) || defined(USE_QMAIL_BUILD)
-BUILD_DEPENDS+=	${QMAIL_DEPENDS}
-.endif
-
-.endif
-
-## End QMAIL Stuff
-
-.endif
-#-*- mode: Fundamental; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-# Please view me with 4 column tabs!
-
-.if !defined(_POSTMKINCLUDED) && !defined(Mail_Pre_Include)
-
-# Please make sure all changes to this file are passed through the maintainer.
-# Do not commit them yourself (unless of course you're the Port's Wraith ;).
-Mail_Include_MAINTAINER=	garga@FreeBSD.org
-Mail_Pre_Include=			bsd.mail.mk
-
-
-## Begin QMAIL Stuff
-
-# Ports can use the following vars:
-#
-# QMAIL_PREFIX		- Define it if qmail is installed in a different PREFIX.
-#			  Default: /var/qmail
-#
-# QMAIL_SLAVEPORT	- Define it if you install a slaveport of qmail, to
-#			  prevent stale dependencies. Valid slaveports are:
-#			  ldap, mysql, smtp_auth+tls, spamcontrol and tls.
-#
-# USE_QMAIL_BUILD	- Add qmail or qmail slaveport to BUILD_DEPENDS.
-#
-# USE_QMAIL_RUN		- Add qmail or qmail slaveport to RUN_DEPENDS.
-#
-# USE_QMAIL		- Add qmail or qmail slaveport to RUN and BUILD_DEPENDS.
-#
-# WANT_QMAIL		- Set vars related to qmail, like QMAIL_PREFIX.
-
-QMAIL_PREFIX?=	/var/qmail
-
-_QMAIL_VALID_SLAVEPORTS=	ldap mysql smtp_auth+tls spamcontrol tls
-
-.if defined(USE_QMAIL) || defined(USE_QMAIL_RUN) || defined (USE_QMAIL_BUILD)
-
-.if defined(QMAIL_SLAVEPORT)
-.	for slave in ${_QMAIL_VALID_SLAVEPORTS}
-.		if ${QMAIL_SLAVEPORT:L} == ${slave}
-_QMAIL_SLAVEPORT_OKAY=	true
-.		endif
-.	endfor
-
-.	if !defined(_QMAIL_SLAVEPORT_OKAY)
-IGNORE=	"Invalid QMAIL_SLAVEPORT value. Only one can be set, valid values are: ${_QMAIL_VALID_SLAVEPORTS}"
-.	endif
-.endif
-
-.if defined(QMAIL_SLAVEPORT)
-QMAIL_DEPENDS=	${QMAIL_PREFIX}/bin/qmail-send:${PORTSDIR}/mail/qmail-${QMAIL_SLAVEPORT:L}
-.else
-QMAIL_DEPENDS=	${QMAIL_PREFIX}/bin/qmail-send:${PORTSDIR}/mail/qmail
-.endif
-
-.if defined(USE_QMAIL) || defined(USE_QMAIL_RUN)
-RUN_DEPENDS+=	${QMAIL_DEPENDS}
-.endif
-
-.if defined(USE_QMAIL) || defined(USE_QMAIL_BUILD)
-BUILD_DEPENDS+=	${QMAIL_DEPENDS}
-.endif
-
-.endif
-
-## End QMAIL Stuff
-
-.endif
-#-*- mode: Fundamental; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-# Please view me with 4 column tabs!
-
-.if !defined(_POSTMKINCLUDED) && !defined(Mail_Pre_Include)
-
-# Please make sure all changes to this file are passed through the maintainer.
-# Do not commit them yourself (unless of course you're the Port's Wraith ;).
-Mail_Include_MAINTAINER=	garga@FreeBSD.org
-Mail_Pre_Include=			bsd.mail.mk
-
-
-## Begin QMAIL Stuff
-
-# Ports can use the following vars:
-#
-# QMAIL_PREFIX		- Define it if qmail is installed in a different PREFIX.
-#			  Default: /var/qmail
-#
-# QMAIL_SLAVEPORT	- Define it if you install a slaveport of qmail, to
-#			  prevent stale dependencies. Valid slaveports are:
-#			  ldap, mysql, smtp_auth+tls, spamcontrol and tls.
-#
-# USE_QMAIL_BUILD	- Add qmail or qmail slaveport to BUILD_DEPENDS.
-#
-# USE_QMAIL_RUN		- Add qmail or qmail slaveport to RUN_DEPENDS.
-#
-# USE_QMAIL		- Add qmail or qmail slaveport to RUN and BUILD_DEPENDS.
-#
-# WANT_QMAIL		- Set vars related to qmail, like QMAIL_PREFIX.
-
-QMAIL_PREFIX?=	/var/qmail
-
-_QMAIL_VALID_SLAVEPORTS=	ldap mysql smtp_auth+tls spamcontrol tls
-
-.if defined(USE_QMAIL) || defined(USE_QMAIL_RUN) || defined (USE_QMAIL_BUILD)
-
-.if defined(QMAIL_SLAVEPORT)
-.	for slave in ${_QMAIL_VALID_SLAVEPORTS}
-.		if ${QMAIL_SLAVEPORT:L} == ${slave}
-_QMAIL_SLAVEPORT_OKAY=	true
-.		endif
-.	endfor
-
-.	if !defined(_QMAIL_SLAVEPORT_OKAY)
-IGNORE=	"Invalid QMAIL_SLAVEPORT value. Only one can be set, valid values are: ${_QMAIL_VALID_SLAVEPORTS}"
-.	endif
-.endif
-
-.if defined(QMAIL_SLAVEPORT)
-QMAIL_DEPENDS=	${QMAIL_PREFIX}/bin/qmail-send:${PORTSDIR}/mail/qmail-${QMAIL_SLAVEPORT:L}
-.else
-QMAIL_DEPENDS=	${QMAIL_PREFIX}/bin/qmail-send:${PORTSDIR}/mail/qmail
-.endif
-
-.if defined(USE_QMAIL) || defined(USE_QMAIL_RUN)
-RUN_DEPENDS+=	${QMAIL_DEPENDS}
-.endif
-
-.if defined(USE_QMAIL) || defined(USE_QMAIL_BUILD)
-BUILD_DEPENDS+=	${QMAIL_DEPENDS}
-.endif
-
-.endif
-
-## End QMAIL Stuff
-
-.endif
-#-*- mode: Fundamental; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-# Please view me with 4 column tabs!
-
-.if !defined(_POSTMKINCLUDED) && !defined(Mail_Pre_Include)
-
-# Please make sure all changes to this file are passed through the maintainer.
-# Do not commit them yourself (unless of course you're the Port's Wraith ;).
-Mail_Include_MAINTAINER=	garga@FreeBSD.org
-Mail_Pre_Include=			bsd.mail.mk
-
-
-## Begin QMAIL Stuff
-
-# Ports can use the following vars:
-#
-# QMAIL_PREFIX		- Define it if qmail is installed in a different PREFIX.
-#			  Default: /var/qmail
-#
-# QMAIL_SLAVEPORT	- Define it if you install a slaveport of qmail, to
-#			  prevent stale dependencies. Valid slaveports are:
-#			  ldap, mysql, smtp_auth+tls, spamcontrol and tls.
-#
-# USE_QMAIL_BUILD	- Add qmail or qmail slaveport to BUILD_DEPENDS.
-#
-# USE_QMAIL_RUN		- Add qmail or qmail slaveport to RUN_DEPENDS.
-#
-# USE_QMAIL		- Add qmail or qmail slaveport to RUN and BUILD_DEPENDS.
-#
-# WANT_QMAIL		- Set vars related to qmail, like QMAIL_PREFIX.
-
-QMAIL_PREFIX?=	/var/qmail
-
-_QMAIL_VALID_SLAVEPORTS=	ldap mysql smtp_auth+tls spamcontrol tls
-
-.if defined(USE_QMAIL) || defined(USE_QMAIL_RUN) || defined (USE_QMAIL_BUILD)
-
-.if defined(QMAIL_SLAVEPORT)
-.	for slave in ${_QMAIL_VALID_SLAVEPORTS}
-.		if ${QMAIL_SLAVEPORT:L} == ${slave}
-_QMAIL_SLAVEPORT_OKAY=	true
-.		endif
-.	endfor
-
-.	if !defined(_QMAIL_SLAVEPORT_OKAY)
-IGNORE=	"Invalid QMAIL_SLAVEPORT value. Only one can be set, valid values are: ${_QMAIL_VALID_SLAVEPORTS}"
-.	endif
-.endif
-
-.if defined(QMAIL_SLAVEPORT)
-QMAIL_DEPENDS=	${QMAIL_PREFIX}/bin/qmail-send:${PORTSDIR}/mail/qmail-${QMAIL_SLAVEPORT:L}
-.else
-QMAIL_DEPENDS=	${QMAIL_PREFIX}/bin/qmail-send:${PORTSDIR}/mail/qmail
-.endif
-
-.if defined(USE_QMAIL) || defined(USE_QMAIL_RUN)
-RUN_DEPENDS+=	${QMAIL_DEPENDS}
-.endif
-
-.if defined(USE_QMAIL) || defined(USE_QMAIL_BUILD)
-BUILD_DEPENDS+=	${QMAIL_DEPENDS}
-.endif
-
-.endif
-
-## End QMAIL Stuff
-
-.endif