- Update to 1.6.9

- Remove USE_REINPLACE
- rcNGfy

PR:		ports/95011
Submitted by:	maintainer

6 files changed, 48 insertions, 44 deletions

diff --git a/sysutils/syslog-ng/Makefile b/sysutils/syslog-ng/Makefile
index bfc32a372ff9..9a7a074fd883 100644
--- a/sysutils/syslog-ng/Makefile
+++ b/sysutils/syslog-ng/Makefile
@@ -6,7 +6,7 @@
 #
 
 PORTNAME=	syslog-ng
-PORTVERSION=	1.6.8
+PORTVERSION=	1.6.9
 CATEGORIES=	sysutils
 MASTER_SITES=	http://www.balabit.com/downloads/syslog-ng/1.6/src/ \
 		http://www.balabit.com/downloads/syslog-ng/1.6/src/old/
@@ -14,13 +14,11 @@ MASTER_SITES=	http://www.balabit.com/downloads/syslog-ng/1.6/src/ \
 MAINTAINER=	vince@blue-box.net
 COMMENT=	A powerful syslogd replacement
 
-BUILD_DEPENDS=	${LOCALBASE}/lib/libol.a:${PORTSDIR}/devel/libol
-
 MAN5=		syslog-ng.conf.5
 MAN8=		syslog-ng.8
 
+USE_RC_SUBR=	syslog-ng.sh
 GNU_CONFIGURE=	yes
-USE_REINPLACE=	yes
 USE_GCC=	3.3+
 
 PKGMESSAGE=	${WRKDIR}/MESSAGE
@@ -57,10 +55,6 @@ post-install:
 		${INSTALL} -d -o ${SHAREOWN} -g ${SHAREGRP} ${PREFIX}/etc/syslog-ng; \
 		${INSTALL_DATA} ${FILESDIR}/syslog-ng.conf.sample ${PREFIX}/etc/syslog-ng; \
 	fi
-	@if [ ! -f ${PREFIX}/etc/rc.d/syslog-ng.sh.sample ]; then \
-		${ECHO} "Installing ${PREFIX}/etc/rc.d/syslog-ng.sh.sample startup file."; \
-		${INSTALL_SCRIPT} ${FILESDIR}/syslog-ng.sh.sample ${PREFIX}/etc/rc.d/syslog-ng.sh.sample; \
-	fi
 	@${CAT} ${PKGMESSAGE}
 
 .include <bsd.port.mk>
diff --git a/sysutils/syslog-ng/distinfo b/sysutils/syslog-ng/distinfo
index f1f2f5040aca..f362a5042bf8 100644
--- a/sysutils/syslog-ng/distinfo
+++ b/sysutils/syslog-ng/distinfo
@@ -1,3 +1,3 @@
-MD5 (syslog-ng-1.6.8.tar.gz) = ffbad7e8e6dcbe385820b8ffba23b622
-SHA256 (syslog-ng-1.6.8.tar.gz) = 3c841fd89599ffb770cdf2844426980d75dc3dab12e0f707e4cbb51937f6125e
-SIZE (syslog-ng-1.6.8.tar.gz) = 383589
+MD5 (syslog-ng-1.6.9.tar.gz) = 5280a86b4f5c25b2ba157c8cea302cf0
+SHA256 (syslog-ng-1.6.9.tar.gz) = e7f2d6dbeae17c14245cd20e9893d0144b969d98a29c230d4e8a0c9cc0f7dde9
+SIZE (syslog-ng-1.6.9.tar.gz) = 765341
diff --git a/sysutils/syslog-ng/files/syslog-ng.sh.in b/sysutils/syslog-ng/files/syslog-ng.sh.in
new file mode 100644
index 000000000000..341143b8a2f3
--- /dev/null
+++ b/sysutils/syslog-ng/files/syslog-ng.sh.in
@@ -0,0 +1,36 @@
+#!/bin/sh
+#
+# $FreeBSD$
+#
+
+# PROVIDE: syslogd
+# REQUIRE: mountcritremote cleanvar
+# BEFORE:  SERVERS
+
+#
+# Add the following line to /etc/rc.conf.local or /etc/rc.conf
+# to enable this service:
+#
+#syslog_ng_enable="YES"
+#
+
+. %%RC_SUBR%%
+
+name=syslog_ng
+rcvar=`set_rcvar`
+
+command=%%PREFIX%%/sbin/syslog-ng
+required_files=%%PREFIX%%/etc/syslog-ng/syslog-ng.conf
+pidfile=/var/run/syslog.pid
+extra_commands=reload
+stop_postcmd=stop_postcmd
+
+load_rc_config $name
+
+: ${syslog_ng_enable:="NO"}
+
+stop_postcmd() {
+  rm -f $pidfile
+}
+
+run_rc_command "$1"
diff --git a/sysutils/syslog-ng/files/syslog-ng.sh.sample b/sysutils/syslog-ng/files/syslog-ng.sh.sample
deleted file mode 100644
index 9aff5b0d38eb..000000000000
--- a/sysutils/syslog-ng/files/syslog-ng.sh.sample
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/sh
-
-if ! PREFIX=$(expr $0 : "\(/.*\)/etc/rc\.d/$(basename $0)\$"); then
-    echo "$0: Cannot determine the PREFIX" >&2
-    exit 1
-fi
-
-case "$1" in
-start)
-	[ -x ${PREFIX}/sbin/syslog-ng ] && ${PREFIX}/sbin/syslog-ng && echo -n ' syslog-ng'
-	;;
-stop)
-	killall syslog-ng && echo -n ' syslog-ng'
-	;;
-*)
-	echo "Usage: `basename $0` {start|stop}" >&2
-	;;
-esac
-
-exit 0
diff --git a/sysutils/syslog-ng/pkg-message b/sysutils/syslog-ng/pkg-message
index 9ed8ef14e716..223446c811e0 100644
--- a/sysutils/syslog-ng/pkg-message
+++ b/sysutils/syslog-ng/pkg-message
@@ -5,19 +5,13 @@ syslog-ng is now installed!  To replace FreeBSD's standard syslogd
 1. Create a configuration file named __PREFIX__/etc/syslog-ng/syslog-ng.conf
    (a sample named syslog-ng.conf.sample has been included)
 
-2. If you are using FreeBSD 4.4 or later, add these lines to your /etc/rc.conf:
+2. Configure syslog-ng to start automatically by adding the following
+   to /etc/rc.conf:
 
-     syslogd_program="__PREFIX__/sbin/syslog-ng"
-     syslogd_flags=""
+        syslog_ng_enable="YES"
 
-3. If you are using FreeBSD 4.3 or earlier, follow these steps:
-
-   a. Configure syslog-ng to start automatically by creating a startup script
-      in __PREFIX__/etc/rc.d.  (a sample named syslog-ng.sh.sample has been
-      included)
-
-   b. Prevent the standard FreeBSD syslogd from starting automatically by
-      adding a line to the end of your /etc/rc.conf file that reads:
+3. Prevent the standard FreeBSD syslogd from starting automatically by
+   adding a line to the end of your /etc/rc.conf file that reads:
 
         syslogd_enable="NO"
  
@@ -27,5 +21,5 @@ syslog-ng is now installed!  To replace FreeBSD's standard syslogd
 
 5. Start syslog-ng:
 
-     __PREFIX__/sbin/syslog-ng
+     __PREFIX__/etc/rc.d/syslog-ng.sh start
 
diff --git a/sysutils/syslog-ng/pkg-plist b/sysutils/syslog-ng/pkg-plist
index 41592866d63c..a7f0e6066d8a 100644
--- a/sysutils/syslog-ng/pkg-plist
+++ b/sysutils/syslog-ng/pkg-plist
@@ -1,4 +1,4 @@
-etc/rc.d/syslog-ng.sh.sample
+@unexec %D/etc/rc.d/syslog-ng.sh stop > /dev/null 2>&1 || true
 etc/syslog-ng/syslog-ng.conf.sample
 sbin/syslog-ng
 %%PORTDOCS%%%%DOCSDIR%%/AUTHORS