#! /bin/sh
#
# SPDX-License-Identifier: BSD-2-Clause
#
# Copyright (c) 2018-2021 Gavin D. Howard and contributors.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# * Redistributions of source code must retain the above copyright notice, this
# list of conditions and the following disclaimer.
#
# * Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation
# and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
script="$0"
scriptdir=$(dirname "$script")
script=$(basename "$script")
. "$scriptdir/scripts/functions.sh"
cd "$scriptdir"
# Simply prints the help message and quits based on the argument.
# @param val The value to pass to exit. Must be an integer.
usage() {
if [ $# -gt 0 ]; then
_usage_val=1
printf "%s\n\n" "$1"
else
_usage_val=0
fi
printf 'usage:\n'
printf ' %s -h\n' "$script"
printf ' %s --help\n' "$script"
printf ' %s [-a|-bD|-dB|-c] [-CEfgGHlmMNPtTvz] [-O OPT_LEVEL] [-k KARATSUBA_LEN]\n' "$script"
printf ' %s \\\n' "$script"
printf ' [--library|--bc-only --disable-dc|--dc-only --disable-bc|--coverage] \\\n'
printf ' [--force --debug --disable-extra-math --disable-generated-tests] \\\n'
printf ' [--disable-history --disable-man-pages --disable-nls --disable-strip] \\\n'
printf ' [--install-all-locales] [--opt=OPT_LEVEL] \\\n'
printf ' [--karatsuba-len=KARATSUBA_LEN] \\\n'
printf ' [--prefix=PREFIX] [--bindir=BINDIR] [--datarootdir=DATAROOTDIR] \\\n'
printf ' [--datadir=DATADIR] [--mandir=MANDIR] [--man1dir=MAN1DIR] \\\n'
printf '\n'
printf ' -a, --library\n'
printf ' Build the libbcl instead of the programs. This is meant to be used with\n'
printf ' Other software like programming languages that want to make use of the\n'
printf ' parsing and math capabilities. This option will install headers using\n'
printf ' `make install`.\n'
printf ' -b, --bc-only\n'
printf ' Build bc only. It is an error if "-d", "--dc-only", "-B", or\n'
printf ' "--disable-bc" are specified too.\n'
printf ' -B, --disable-bc\n'
printf ' Disable bc. It is an error if "-b", "--bc-only", "-D", or "--disable-dc"\n'
printf ' are specified too.\n'
printf ' -c, --coverage\n'
printf ' Generate test coverage code. Requires gcov and gcovr.\n'
printf ' It is an error if either "-b" ("-D") or "-d" ("-B") is specified.\n'
printf ' Requires a compiler that use gcc-compatible coverage options\n'
printf ' -C, --disable-clean\n'
printf ' Disable the clean that configure.sh does before configure.\n'
printf ' -d, --dc-only\n'
printf ' Build dc only. It is an error if "-b", "--bc-only", "-D", or\n'
printf ' "--disable-dc" are specified too.\n'
printf ' -D, --disable-dc\n'
printf ' Disable dc. It is an error if "-d", "--dc-only", "-B", or "--disable-bc"\n'
printf ' are specified too.\n'
printf ' -E, --disable-extra-math\n'
printf ' Disable extra math. This includes: "$" operator (truncate to integer),\n'
printf ' "@" operator (set number of decimal places), and r(x, p) (rounding\n'
printf ' function). Additionally, this option disables the extra printing\n'
printf ' functions in the math library.\n'
printf ' -f, --force\n'
printf ' Force use of all enabled options, even if they do not work. This\n'
printf ' option is to allow the maintainer a way to test that certain options\n'
printf ' are not failing invisibly. (Development only.)'
printf ' -g, --debug\n'
printf ' Build in debug mode. Adds the "-g" flag, and if there are no\n'
printf ' other CFLAGS, and "-O" was not given, this also adds the "-O0"\n'
printf ' flag. If this flag is *not* given, "-DNDEBUG" is added to CPPFLAGS\n'
printf ' and a strip flag is added to the link stage.\n'
printf ' -G, --disable-generated-tests\n'
printf ' Disable generating tests. This is for platforms that do not have a\n'
printf ' GNU bc-compatible bc to generate tests.\n'
printf ' -h, --help\n'
printf ' Print this help message and exit.\n'
printf ' -H, --disable-history\n'
printf ' Disable history.\n'
printf ' -k KARATSUBA_LEN, --karatsuba-len KARATSUBA_LEN\n'
printf ' Set the karatsuba length to KARATSUBA_LEN (default is 64).\n'
printf ' It is an error if KARATSUBA_LEN is not a number or is less than 16.\n'
printf ' -l, --install-all-locales\n'
printf ' Installs all locales, regardless of how many are on the system. This\n'
printf ' option is useful for package maintainers who want to make sure that\n'
printf ' a package contains all of the locales that end users might need.\n'
printf ' -m, --enable-memcheck\n'
printf ' Enable memcheck mode, to ensure no memory leaks. For development only.\n'
printf ' -M, --disable-man-pages\n'
printf ' Disable installing manpages.\n'
printf ' -N, --disable-nls\n'
printf ' Disable POSIX locale (NLS) support.\n'
printf ' -O OPT_LEVEL, --opt OPT_LEVEL\n'
printf ' Set the optimization level. This can also be included in the CFLAGS,\n'
printf ' but it is provided, so maintainers can build optimized debug builds.\n'
printf ' This is passed through to the compiler, so it must be supported.\n'
printf ' -s SETTING, --set-default-on SETTING\n'
printf ' Set the default named by SETTING to on. See below for possible values\n'
printf ' for SETTING. For multiple instances of the -s or -S for the the same\n'
printf ' setting, the last one is used.\n'
printf ' -S SETTING, --set-default-off SETTING\n'
printf ' Set the default named by SETTING to off. See below for possible values\n'
printf ' for SETTING. For multiple instances of the -s or -S for the the same\n'
printf ' setting, the last one is used.\n'
printf ' -t, --enable-test-timing\n'
printf ' Enable the timing of tests. This is for development only.\n'
printf ' -T, --disable-strip\n'
printf ' Disable stripping symbols from the compiled binary or binaries.\n'
printf ' Stripping symbols only happens when debug mode is off.\n'
printf ' -v, --enable-valgrind\n'
printf ' Enable a build appropriate for valgrind. For development only.\n'
printf ' -z, --enable-fuzz-mode\n'
printf ' Enable fuzzing mode. THIS IS FOR DEVELOPMENT ONLY.\n'
printf ' --prefix PREFIX\n'
printf ' The prefix to install to. Overrides "$PREFIX" if it exists.\n'
printf ' If PREFIX is "/usr", install path will be "/usr/bin".\n'
printf ' Default is "/usr/local".\n'
printf ' --bindir BINDIR\n'
printf ' The directory to install binaries in. Overrides "$BINDIR" if it exists.\n'
printf ' Default is "$PREFIX/bin".\n'
printf ' --includedir INCLUDEDIR\n'
printf ' The directory to install headers in. Overrides "$INCLUDEDIR" if it\n'
printf ' exists. Default is "$PREFIX/include".\n'
printf ' --libdir LIBDIR\n'
printf ' The directory to install libraries in. Overrides "$LIBDIR" if it exists.\n'
printf ' Default is "$PREFIX/lib".\n'
printf ' --datarootdir DATAROOTDIR\n'
printf ' The root location for data files. Overrides "$DATAROOTDIR" if it exists.\n'
printf ' Default is "$PREFIX/share".\n'
printf ' --datadir DATADIR\n'
printf ' The location for data files. Overrides "$DATADIR" if it exists.\n'
printf ' Default is "$DATAROOTDIR".\n'
printf ' --mandir MANDIR\n'
printf ' The location to install manpages to. Overrides "$MANDIR" if it exists.\n'
printf ' Default is "$DATADIR/man".\n'
printf ' --man1dir MAN1DIR\n'
printf ' The location to install Section 1 manpages to. Overrides "$MAN1DIR" if\n'
printf ' it exists. Default is "$MANDIR/man1".\n'
printf ' --man3dir MAN3DIR\n'
printf ' The location to install Section 3 manpages to. Overrides "$MAN3DIR" if\n'
printf ' it exists. Default is "$MANDIR/man3".\n'
printf '\n'
printf 'In addition, the following environment variables are used:\n'
printf '\n'
printf ' CC C compiler. Must be compatible with POSIX c99. If there is a\n'
printf ' space in the basename of the compiler, the items after the\n'
printf ' first space are assumed to be compiler flags, and in that case,\n'
printf ' the flags are automatically moved into CFLAGS. Default is\n'
printf ' "c99".\n'
printf ' HOSTCC Host C compiler. Must be compatible with POSIX c99. If there is\n'
printf ' a space in the basename of the compiler, the items after the\n'
printf ' first space are assumed to be compiler flags, and in the case,\n'
printf ' the flags are automatically moved into HOSTCFLAGS. Default is\n'
printf ' "$CC".\n'
printf ' HOST_CC Same as HOSTCC. If HOSTCC also exists, it is used.\n'
printf ' CFLAGS C compiler flags.\n'
printf ' HOSTCFLAGS CFLAGS for HOSTCC. Default is "$CFLAGS".\n'
printf ' HOST_CFLAGS Same as HOST_CFLAGS. If HOST_CFLAGS also exists, it is used.\n'
printf ' CPPFLAGS C preprocessor flags. Default is "".\n'
printf ' LDFLAGS Linker flags. Default is "".\n'
printf ' PREFIX The prefix to install to. Default is "/usr/local".\n'
printf ' If PREFIX is "/usr", install path will be "/usr/bin".\n'
printf ' BINDIR The directory to install binaries in. Default is "$PREFIX/bin".\n'
printf ' INCLUDEDIR The directory to install header files in. Default is\n'
printf ' "$PREFIX/include".\n'
printf ' LIBDIR The directory to install libraries in. Default is\n'
printf ' "$PREFIX/lib".\n'
printf ' DATAROOTDIR The root location for data files. Default is "$PREFIX/share".\n'
printf ' DATADIR The location for data files. Default is "$DATAROOTDIR".\n'
printf ' MANDIR The location to install manpages to. Default is "$DATADIR/man".\n'
printf ' MAN1DIR The location to install Section 1 manpages to. Default is\n'
printf ' "$MANDIR/man1".\n'
printf ' MAN3DIR The location to install Section 3 manpages to. Default is\n'
printf ' "$MANDIR/man3".\n'
printf ' NLSPATH The location to install locale catalogs to. Must be an absolute\n'
printf ' path (or contain one). This is treated the same as the POSIX\n'
printf ' definition of $NLSPATH (see POSIX environment variables for\n'
printf ' more information). Default is "/usr/share/locale/%%L/%%N".\n'
printf ' EXECSUFFIX The suffix to append to the executable names, used to not\n'
printf ' interfere with other installed bc executables. Default is "".\n'
printf ' EXECPREFIX The prefix to append to the executable names, used to not\n'
printf ' interfere with other installed bc executables. Default is "".\n'
printf ' DESTDIR For package creation. Default is "". If it is empty when\n'
printf ' `%s` is run, it can also be passed to `make install`\n' "$script"
printf ' later as an environment variable. If both are specified,\n'
printf ' the one given to `%s` takes precedence.\n' "$script"
printf ' LONG_BIT The number of bits in a C `long` type. This is mostly for the\n'
printf ' embedded space since this `bc` uses `long`s internally for\n'
printf ' overflow checking. In C99, a `long` is required to be 32 bits.\n'
printf ' For most normal desktop systems, setting this is unnecessary,\n'
printf ' except that 32-bit platforms with 64-bit longs may want to set\n'
printf ' it to `32`. Default is the default of `LONG_BIT` for the target\n'
printf ' platform. Minimum allowed is `32`. It is a build time error if\n'
printf ' the specified value of `LONG_BIT` is greater than the default\n'
printf ' value of `LONG_BIT` for the target platform.\n'
printf ' GEN_HOST Whether to use `gen/strgen.c`, instead of `gen/strgen.sh`, to\n'
printf ' produce the C files that contain the help texts as well as the\n'
printf ' math libraries. By default, `gen/strgen.c` is used, compiled by\n'
printf ' "$HOSTCC" and run on the host machine. Using `gen/strgen.sh`\n'
printf ' removes the need to compile and run an executable on the host\n'
printf ' machine since `gen/strgen.sh` is a POSIX shell script. However,\n'
printf ' `gen/lib2.bc` is perilously close to 4095 characters, the max\n'
printf ' supported length of a string literal in C99 (and it could be\n'
printf ' added to in the future), and `gen/strgen.sh` generates a string\n'
printf ' literal instead of an array, as `gen/strgen.c` does. For most\n'
printf ' production-ready compilers, this limit probably is not\n'
printf ' enforced, but it could be. Both options are still available for\n'
printf ' this reason. If you are sure your compiler does not have the\n'
printf ' limit and do not want to compile and run a binary on the host\n'
printf ' machine, set this variable to "0". Any other value, or a\n'
printf ' non-existent value, will cause the build system to compile and\n'
printf ' run `gen/strgen.c`. Default is "".\n'
printf ' GEN_EMU Emulator to run string generator code under (leave empty if not\n'
printf ' necessary). This is not necessary when using `gen/strgen.sh`.\n'
printf ' Default is "".\n'
printf '\n'
printf 'WARNING: even though `configure.sh` supports both option types, short and\n'
printf 'long, it does not support handling both at the same time. Use only one type.\n'
printf '\n'
printf 'Settings\n'
printf '========\n'
printf '\n'
printf 'bc and dc have some settings that, while they cannot be removed by build time\n'
printf 'options, can have their defaults changed at build time by packagers. Users are\n'
printf 'also able to change each setting with environment variables.\n'
printf '\n'
printf 'The following is a table of settings, along with their default values and the\n'
printf 'environment variables users can use to change them. (For the defaults, non-zero\n'
printf 'means on, and zero means off.)\n'
printf '\n'
printf '| Setting | Description | Default | Env Variable |\n'
printf '| =============== | ==================== | ============ | ==================== |\n'
printf '| bc.banner | Whether to display | 0 | BC_BANNER |\n'
printf '| | the bc version | | |\n'
printf '| | banner when in | | |\n'
printf '| | interactive mode. | | |\n'
printf '| --------------- | -------------------- | ------------ | -------------------- |\n'
printf '| bc.sigint_reset | Whether SIGINT will | 1 | BC_SIGINT_RESET |\n'
printf '| | reset bc, instead of | | |\n'
printf '| | exiting, when in | | |\n'
printf '| | interactive mode. | | |\n'
printf '| --------------- | -------------------- | ------------ | -------------------- |\n'
printf '| dc.sigint_reset | Whether SIGINT will | 1 | DC_SIGINT_RESET |\n'
printf '| | reset dc, instead of | | |\n'
printf '| | exiting, when in | | |\n'
printf '| | interactive mode. | | |\n'
printf '| --------------- | -------------------- | ------------ | -------------------- |\n'
printf '| bc.tty_mode | Whether TTY mode for | 1 | BC_TTY_MODE |\n'
printf '| | bc should be on when | | |\n'
printf '| | available. | | |\n'
printf '| --------------- | -------------------- | ------------ | -------------------- |\n'
printf '| dc.tty_mode | Whether TTY mode for | 0 | BC_TTY_MODE |\n'
printf '| | dc should be on when | | |\n'
printf '| | available. | | |\n'
printf '| --------------- | -------------------- | ------------ | -------------------- |\n'
printf '| bc.prompt | Whether the prompt | $BC_TTY_MODE | BC_PROMPT |\n'
printf '| | for bc should be on | | |\n'
printf '| | in tty mode. | | |\n'
printf '| --------------- | -------------------- | ------------ | -------------------- |\n'
printf '| dc.prompt | Whether the prompt | $DC_TTY_MODE | DC_PROMPT |\n'
printf '| | for dc should be on | | |\n'
printf '| | in tty mode. | | |\n'
printf '| --------------- | -------------------- | ------------ | -------------------- |\n'
printf '\n'
printf 'These settings are not meant to be changed on a whim. They are meant to ensure\n'
printf 'that this bc and dc will conform to the expectations of the user on each\n'
printf 'platform.\n'
exit "$_usage_val"
}
# Replaces a file extension in a filename. This is used mostly to turn filenames
# like `src/num.c` into `src/num.o`. In other words, it helps to link targets to
# the files they depend on.
#
# @param file The filename.
# @param ext1 The extension to replace.
# @param ext2 The new extension.
replace_ext() {
if [ "$#" -ne 3 ]; then
err_exit "Invalid number of args to $0"
fi
_replace_ext_file="$1"
_replace_ext_ext1="$2"
_replace_ext_ext2="$3"
_replace_ext_result="${_replace_ext_file%.$_replace_ext_ext1}.$_replace_ext_ext2"
printf '%s\n' "$_replace_ext_result"
}
# Replaces a file extension in every filename given in a list. The list is just
# a space-separated list of words, so filenames are expected to *not* have
# spaces in them. See the documentation for `replace_ext()`.
#
# @param files The list of space-separated filenames to replace extensions for.
# @param ext1 The extension to replace.
# @param ext2 The new extension.
replace_exts() {
if [ "$#" -ne 3 ]; then
err_exit "Invalid number of args to $0"
fi
_replace_exts_files="$1"
_replace_exts_ext1="$2"
_replace_exts_ext2="$3"
for _replace_exts_file in $_replace_exts_files; do
_replace_exts_new_name=$(replace_ext "$_replace_exts_file" "$_replace_exts_ext1" "$_replace_exts_ext2")
_replace_exts_result="$_replace_exts_result $_replace_exts_new_name"
done
printf '%s\n' "$_replace_exts_result"
}
# Finds a placeholder in @a str and replaces it. This is the workhorse of
# configure.sh. It's what replaces placeholders in Makefile.in with the data
# needed for the chosen build. Below, you will see a lot of calls to this
# function.
#
# Note that needle can never contain an exclamation point. For more information,
# see substring_replace() in scripts/functions.sh.
#
# @param str The string to find and replace placeholders in.
# @param needle The placeholder name.
# @param replacement The string to use to replace the placeholder.
replace() {
if [ "$#" -ne 3 ]; then
err_exit "Invalid number of args to $0"
fi
_replace_str="$1"
_replace_needle="$2"
_replace_replacement="$3"
substring_replace "$_replace_str" "%%$_replace_needle%%" "$_replace_replacement"
}
# This function finds all the source files that need to be built. If there is
# only one argument and it is empty, then all source files are built. Otherwise,
# the arguments are all assumed to be source files that should *not* be built.
find_src_files() {
if [ "$#" -ge 1 ] && [ "$1" != "" ]; then
while [ "$#" -ge 1 ]; do
_find_src_files_a="${1## }"
shift
_find_src_files_args="$_find_src_files_args ! -path src/${_find_src_files_a}"
done
else
_find_src_files_args="-print"
fi
printf '%s\n' $(find src/ -depth -name "*.c" $_find_src_files_args)
}
# This function generates a list of files to go into the Makefile. It generates
# the list of object files, as well as the list of test coverage files.
#
# @param contents The contents of the Makefile template to put the list of
# files into.
gen_file_list() {
if [ "$#" -lt 1 ]; then
err_exit "Invalid number of args to $0"
fi
_gen_file_list_contents="$1"
shift
p=$(pwd)
cd "$scriptdir"
if [ "$#" -ge 1 ]; then
_gen_file_list_unneeded="$@"
else
_gen_file_list_unneeded=""
fi
_gen_file_list_needle_src="SRC"
_gen_file_list_needle_obj="OBJ"
_gen_file_list_needle_gcda="GCDA"
_gen_file_list_needle_gcno="GCNO"
_gen_file_list_replacement=$(find_src_files $_gen_file_list_unneeded | tr '\n' ' ')
_gen_file_list_contents=$(replace "$_gen_file_list_contents" \
"$_gen_file_list_needle_src" "$_gen_file_list_replacement")
_gen_file_list_replacement=$(replace_exts "$_gen_file_list_replacement" "c" "o")
_gen_file_list_contents=$(replace "$_gen_file_list_contents" \
"$_gen_file_list_needle_obj" "$_gen_file_list_replacement")
_gen_file_list_replacement=$(replace_exts "$_gen_file_list_replacement" "o" "gcda")
_gen_file_list_contents=$(replace "$_gen_file_list_contents" \
"$_gen_file_list_needle_gcda" "$_gen_file_list_replacement")
_gen_file_list_replacement=$(replace_exts "$_gen_file_list_replacement" "gcda" "gcno")
_gen_file_list_contents=$(replace "$_gen_file_list_contents" \
"$_gen_file_list_needle_gcno" "$_gen_file_list_replacement")
cd "$p"
printf '%s\n' "$_gen_file_list_contents"
}
# Generates the proper test targets for each test to have its own target. This
# allows `make test` to run in parallel.
#
# @param name Which calculator to generate tests for.
# @param extra_math An integer that, if non-zero, activates extra math tests.
# @param time_tests An integer that, if non-zero, tells the test suite to time
# the execution of each test.
gen_tests() {
_gen_tests_name="$1"
shift
_gen_tests_extra_math="$1"
shift
_gen_tests_time_tests="$1"
shift
_gen_tests_extra_required=$(cat "$scriptdir/tests/extra_required.txt")
for _gen_tests_t in $(cat "$scriptdir/tests/$_gen_tests_name/all.txt"); do
if [ "$_gen_tests_extra_math" -eq 0 ]; then
if [ -z "${_gen_tests_extra_required##*$_gen_tests_t*}" ]; then
printf 'test_%s_%s:\n\t@printf "Skipping %s %s\\n"\n\n' \
"$_gen_tests_name" "$_gen_tests_t" "$_gen_tests_name" \
"$_gen_tests_t" >> "$scriptdir/Makefile"
continue
fi
fi
printf 'test_%s_%s:\n\t@sh tests/test.sh %s %s %s %s %s\n\n' \
"$_gen_tests_name" "$_gen_tests_t" "$_gen_tests_name" \
"$_gen_tests_t" "$generate_tests" "$time_tests" \
"$*" >> "$scriptdir/Makefile"
done
}
# Generates a list of test targets that will be used as prerequisites for other
# targets.
#
# @param name The name of the calculator to generate test targets for.
gen_test_targets() {
_gen_test_targets_name="$1"
shift
_gen_test_targets_tests=$(cat "$scriptdir/tests/${_gen_test_targets_name}/all.txt")
for _gen_test_targets_t in $_gen_test_targets_tests; do
printf ' test_%s_%s' "$_gen_test_targets_name" "$_gen_test_targets_t"
done
printf '\n'
}
# Generates the proper script test targets for each script test to have its own
# target. This allows `make test` to run in parallel.
#
# @param name Which calculator to generate tests for.
# @param extra_math An integer that, if non-zero, activates extra math tests.
# @param generate An integer that, if non-zero, activates generated tests.
# @param time_tests An integer that, if non-zero, tells the test suite to time
# the execution of each test.
gen_script_tests() {
_gen_script_tests_name="$1"
shift
_gen_script_tests_extra_math="$1"
shift
_gen_script_tests_generate="$1"
shift
_gen_script_tests_time="$1"
shift
_gen_script_tests_tests=$(cat "$scriptdir/tests/$_gen_script_tests_name/scripts/all.txt")
for _gen_script_tests_f in $_gen_script_tests_tests; do
_gen_script_tests_b=$(basename "$_gen_script_tests_f" ".${_gen_script_tests_name}")
printf 'test_%s_script_%s:\n\t@sh tests/script.sh %s %s %s 1 %s %s %s\n\n' \
"$_gen_script_tests_name" "$_gen_script_tests_b" "$_gen_script_tests_name" \
"$_gen_script_tests_f" "$_gen_script_tests_extra_math" "$_gen_script_tests_generate" \
"$_gen_script_tests_time" "$*" >> "$scriptdir/Makefile"
done
}
set_default() {
_set_default_on="$1"
shift
_set_default_name="$1"
shift
# The reason that the variables that are being set do not have the same
# non-collision avoidance that the other variables do is that we *do* want
# the settings of these variables to leak out of the function. They adjust
# the settings outside of the function.
case "$_set_default_name" in
bc.banner) bc_default_banner="$_set_default_on" ;;
bc.sigint_reset) bc_default_sigint_reset="$_set_default_on" ;;
dc.sigint_reset) dc_default_sigint_reset="$_set_default_on" ;;
bc.tty_mode) bc_default_tty_mode="$_set_default_on" ;;
dc.tty_mode) dc_default_tty_mode="$_set_default_on" ;;
bc.prompt) bc_default_prompt="$_set_default_on" ;;
dc.prompt) dc_default_prompt="$_set_default_on" ;;
?) usage "Invalid setting: $_set_default_name" ;;
esac
}
# Generates a list of script test targets that will be used as prerequisites for
# other targets.
#
# @param name The name of the calculator to generate script test targets for.
gen_script_test_targets() {
_gen_script_test_targets_name="$1"
shift
_gen_script_test_targets_tests=$(cat "$scriptdir/tests/$_gen_script_test_targets_name/scripts/all.txt")
for _gen_script_test_targets_f in $_gen_script_test_targets_tests; do
_gen_script_test_targets_b=$(basename "$_gen_script_test_targets_f" \
".$_gen_script_test_targets_name")
printf ' test_%s_script_%s' "$_gen_script_test_targets_name" \
"$_gen_script_test_targets_b"
done
printf '\n'
}
# This is a list of defaults, but it is also the list of possible options for
# users to change.
#
# The development options are: force (force options even if they fail), valgrind
# (build in a way suitable for valgrind testing), memcheck (same as valgrind),
# and fuzzing (build in a way suitable for fuzzing).
bc_only=0
dc_only=0
coverage=0
karatsuba_len=32
debug=0
hist=1
extra_math=1
optimization=""
generate_tests=1
install_manpages=1
nls=1
force=0
strip_bin=1
all_locales=0
library=0
fuzz=0
time_tests=0
vg=0
memcheck=0
clean=1
# The empty strings are because they depend on TTY mode. If they are directly
# set, though, they will be integers. We test for empty strings later.
bc_default_banner=0
bc_default_sigint_reset=1
dc_default_sigint_reset=1
bc_default_tty_mode=1
dc_default_tty_mode=0
bc_default_prompt=""
dc_default_prompt=""
# getopts is a POSIX utility, but it cannot handle long options. Thus, the
# handling of long options is done by hand, and that's the reason that short and
# long options cannot be mixed.
while getopts "abBcdDEfgGhHk:lMmNO:S:s:tTvz-" opt; do
case "$opt" in
a) library=1 ;;
b) bc_only=1 ;;
B) dc_only=1 ;;
c) coverage=1 ;;
C) clean=0 ;;
d) dc_only=1 ;;
D) bc_only=1 ;;
E) extra_math=0 ;;
f) force=1 ;;
g) debug=1 ;;
G) generate_tests=0 ;;
h) usage ;;
H) hist=0 ;;
k) karatsuba_len="$OPTARG" ;;
l) all_locales=1 ;;
m) memcheck=1 ;;
M) install_manpages=0 ;;
N) nls=0 ;;
O) optimization="$OPTARG" ;;
S) set_default 0 "$OPTARG" ;;
s) set_default 1 "$OPTARG" ;;
t) time_tests=1 ;;
T) strip_bin=0 ;;
v) vg=1 ;;
z) fuzz=1 ;;
-)
arg="$1"
arg="${arg#--}"
LONG_OPTARG="${arg#*=}"
case $arg in
help) usage ;;
library) library=1 ;;
bc-only) bc_only=1 ;;
dc-only) dc_only=1 ;;
coverage) coverage=1 ;;
debug) debug=1 ;;
force) force=1 ;;
prefix=?*) PREFIX="$LONG_OPTARG" ;;
prefix)
if [ "$#" -lt 2 ]; then
usage "No argument given for '--$arg' option"
fi
PREFIX="$2"
shift ;;
bindir=?*) BINDIR="$LONG_OPTARG" ;;
bindir)
if [ "$#" -lt 2 ]; then
usage "No argument given for '--$arg' option"
fi
BINDIR="$2"
shift ;;
includedir=?*) INCLUDEDIR="$LONG_OPTARG" ;;
includedir)
if [ "$#" -lt 2 ]; then
usage "No argument given for '--$arg' option"
fi
INCLUDEDIR="$2"
shift ;;
libdir=?*) LIBDIR="$LONG_OPTARG" ;;
libdir)
if [ "$#" -lt 2 ]; then
usage "No argument given for '--$arg' option"
fi
LIBDIR="$2"
shift ;;
datarootdir=?*) DATAROOTDIR="$LONG_OPTARG" ;;
datarootdir)
if [ "$#" -lt 2 ]; then
usage "No argument given for '--$arg' option"
fi
DATAROOTDIR="$2"
shift ;;
datadir=?*) DATADIR="$LONG_OPTARG" ;;
datadir)
if [ "$#" -lt 2 ]; then
usage "No argument given for '--$arg' option"
fi
DATADIR="$2"
shift ;;
mandir=?*) MANDIR="$LONG_OPTARG" ;;
mandir)
if [ "$#" -lt 2 ]; then
usage "No argument given for '--$arg' option"
fi
MANDIR="$2"
shift ;;
man1dir=?*) MAN1DIR="$LONG_OPTARG" ;;
man1dir)
if [ "$#" -lt 2 ]; then
usage "No argument given for '--$arg' option"
fi
MAN1DIR="$2"
shift ;;
man3dir=?*) MAN3DIR="$LONG_OPTARG" ;;
man3dir)
if [ "$#" -lt 2 ]; then
usage "No argument given for '--$arg' option"
fi
MAN3DIR="$2"
shift ;;
localedir=?*) LOCALEDIR="$LONG_OPTARG" ;;
localedir)
if [ "$#" -lt 2 ]; then
usage "No argument given for '--$arg' option"
fi
LOCALEDIR="$2"
shift ;;
karatsuba-len=?*) karatsuba_len="$LONG_OPTARG" ;;
karatsuba-len)
if [ "$#" -lt 2 ]; then
usage "No argument given for '--$arg' option"
fi
karatsuba_len="$1"
shift ;;
opt=?*) optimization="$LONG_OPTARG" ;;
opt)
if [ "$#" -lt 2 ]; then
usage "No argument given for '--$arg' option"
fi
optimization="$1"
shift ;;
set-default-on=?*) set_default 1 "$LONG_OPTARG" ;;
set-default-on)
if [ "$#" -lt 2 ]; then
usage "No argument given for '--$arg' option"
fi
set_default 1 "$1"
shift ;;
set-default-off=?*) set_default 0 "$LONG_OPTARG" ;;
set-default-off)
if [ "$#" -lt 2 ]; then
usage "No argument given for '--$arg' option"
fi
set_default 0 "$1"
shift ;;
disable-bc) dc_only=1 ;;
disable-dc) bc_only=1 ;;
disable-clean) clean=0 ;;
disable-extra-math) extra_math=0 ;;
disable-generated-tests) generate_tests=0 ;;
disable-history) hist=0 ;;
disable-man-pages) install_manpages=0 ;;
disable-nls) nls=0 ;;
disable-strip) strip_bin=0 ;;
enable-test-timing) time_tests=1 ;;
enable-valgrind) vg=1 ;;
enable-fuzz-mode) fuzz=1 ;;
enable-memcheck) memcheck=1 ;;
install-all-locales) all_locales=1 ;;
help* | bc-only* | dc-only* | coverage* | debug*)
usage "No arg allowed for --$arg option" ;;
disable-bc* | disable-dc* | disable-clean*)
usage "No arg allowed for --$arg option" ;;
disable-extra-math*)
usage "No arg allowed for --$arg option" ;;
disable-generated-tests* | disable-history*)
usage "No arg allowed for --$arg option" ;;
disable-man-pages* | disable-nls* | disable-strip*)
usage "No arg allowed for --$arg option" ;;
enable-fuzz-mode* | enable-test-timing* | enable-valgrind*)
usage "No arg allowed for --$arg option" ;;
enable-memcheck* | install-all-locales*)
usage "No arg allowed for --$arg option" ;;
'') break ;; # "--" terminates argument processing
* ) usage "Invalid option $LONG_OPTARG" ;;
esac
shift
OPTIND=1 ;;
?) usage "Invalid option: $opt" ;;
esac
done
# Sometimes, developers don't want configure.sh to do a config clean. But
# sometimes they do.
if [ "$clean" -ne 0 ]; then
if [ -f ./Makefile ]; then
make clean_config > /dev/null
fi
fi
# It is an error to say that bc only should be built and likewise for dc.
if [ "$bc_only" -eq 1 ] && [ "$dc_only" -eq 1 ]; then
usage "Can only specify one of -b(-D) or -d(-B)"
fi
# The library is mutually exclusive to the calculators, so it's an error to
# give an option for either of them.
if [ "$library" -ne 0 ]; then
if [ "$bc_only" -eq 1 ] || [ "$dc_only" -eq 1 ]; then
usage "Must not specify -b(-D) or -d(-B) when building the library"
fi
fi
# KARATSUBA_LEN must be an integer and must be 16 or greater.
case $karatsuba_len in
(*[!0-9]*|'') usage "KARATSUBA_LEN is not a number" ;;
(*) ;;
esac
if [ "$karatsuba_len" -lt 16 ]; then
usage "KARATSUBA_LEN is less than 16"
fi
set -e
if [ -z "${LONG_BIT+set}" ]; then
LONG_BIT_DEFINE=""
elif [ "$LONG_BIT" -lt 32 ]; then
usage "LONG_BIT is less than 32"
else
LONG_BIT_DEFINE="-DBC_LONG_BIT=\$(BC_LONG_BIT)"
fi
if [ -z "$CC" ]; then
CC="c99"
else
# I had users complain that, if they gave CFLAGS as part of CC, which
# autotools allows in its braindead way, the build would fail with an error.
# I don't like adjusting for autotools, but oh well. These lines puts the
# stuff after the first space into CFLAGS.
ccbase=$(basename "$CC")
suffix=" *"
prefix="* "
if [ "${ccbase%%$suffix}" != "$ccbase" ]; then
ccflags="${ccbase#$prefix}"
cc="${ccbase%%$suffix}"
ccdir=$(dirname "$CC")
if [ "$ccdir" = "." ] && [ "${CC#.}" = "$CC" ]; then
ccdir=""
else
ccdir="$ccdir/"
fi
CC="${ccdir}${cc}"
CFLAGS="$CFLAGS $ccflags"
fi
fi
if [ -z "$HOSTCC" ] && [ -z "$HOST_CC" ]; then
HOSTCC="$CC"
elif [ -z "$HOSTCC" ]; then
HOSTCC="$HOST_CC"
fi
if [ "$HOSTCC" != "$CC" ]; then
# Like above, this splits HOSTCC and HOSTCFLAGS.
ccbase=$(basename "$HOSTCC")
suffix=" *"
prefix="* "
if [ "${ccbase%%$suffix}" != "$ccbase" ]; then
ccflags="${ccbase#$prefix}"
cc="${ccbase%%$suffix}"
ccdir=$(dirname "$HOSTCC")
if [ "$ccdir" = "." ] && [ "${HOSTCC#.}" = "$HOSTCC" ]; then
ccdir=""
else
ccdir="$ccdir/"
fi
HOSTCC="${ccdir}${cc}"
HOSTCFLAGS="$HOSTCFLAGS $ccflags"
fi
fi
if [ -z "${HOSTCFLAGS+set}" ] && [ -z "${HOST_CFLAGS+set}" ]; then
HOSTCFLAGS="$CFLAGS"
elif [ -z "${HOSTCFLAGS+set}" ]; then
HOSTCFLAGS="$HOST_CFLAGS"
fi
# Store these for the cross compilation detection later.
OLDCFLAGS="$CFLAGS"
OLDHOSTCFLAGS="$HOSTCFLAGS"
link="@printf 'No link necessary\\\\n'"
main_exec="BC"
executable="BC_EXEC"
tests="test_bc timeconst test_dc test_history"
bc_test="@tests/all.sh bc $extra_math 1 $generate_tests $time_tests \$(BC_EXEC)"
dc_test="@tests/all.sh dc $extra_math 1 $generate_tests $time_tests \$(DC_EXEC)"
timeconst="@tests/bc/timeconst.sh tests/bc/scripts/timeconst.bc \$(BC_EXEC)"
# In order to have cleanup at exit, we need to be in
# debug mode, so don't run valgrind without that.
if [ "$vg" -ne 0 ]; then
debug=1
bc_test_exec='valgrind $(VALGRIND_ARGS) $(BC_EXEC)'
dc_test_exec='valgrind $(VALGRIND_ARGS) $(DC_EXEC)'
else
bc_test_exec='$(BC_EXEC)'
dc_test_exec='$(DC_EXEC)'
fi
test_bc_history_prereqs="test_bc_history_all"
test_dc_history_prereqs="test_dc_history_all"
karatsuba="@printf 'karatsuba cannot be run because one of bc or dc is not built\\\\n'"
karatsuba_test="@printf 'karatsuba cannot be run because one of bc or dc is not built\\\\n'"
bc_lib="\$(GEN_DIR)/lib.o"
bc_help="\$(GEN_DIR)/bc_help.o"
dc_help="\$(GEN_DIR)/dc_help.o"
default_target_prereqs="\$(BIN) \$(OBJS)"
default_target_cmd="\$(CC) \$(CFLAGS) \$(OBJS) \$(LDFLAGS) -o \$(EXEC)"
default_target="\$(DC_EXEC)"
second_target_prereqs=""
second_target_cmd="$default_target_cmd"
second_target="\$(BC_EXEC)"
# This if/else if chain is for setting the defaults that change based on whether
# the library is being built, bc only, dc only, or both calculators.
if [ "$library" -ne 0 ]; then
extra_math=1
nls=0
hist=0
bc=1
dc=1
default_target_prereqs="\$(BIN) \$(OBJ)"
default_target_cmd="ar -r -cu \$(LIBBC) \$(OBJ)"
default_target="\$(LIBBC)"
tests="test_library"
test_bc_history_prereqs=" test_bc_history_skip"
test_dc_history_prereqs=" test_dc_history_skip"
elif [ "$bc_only" -eq 1 ]; then
bc=1
dc=0
dc_help=""
executables="bc"
dc_test="@printf 'No dc tests to run\\\\n'"
test_dc_history_prereqs=" test_dc_history_skip"
install_prereqs=" install_execs"
install_man_prereqs=" install_bc_manpage"
uninstall_prereqs=" uninstall_bc"
uninstall_man_prereqs=" uninstall_bc_manpage"
default_target="\$(BC_EXEC)"
second_target="\$(DC_EXEC)"
tests="test_bc timeconst test_history"
elif [ "$dc_only" -eq 1 ]; then
bc=0
dc=1
bc_lib=""
bc_help=""
executables="dc"
main_exec="DC"
executable="DC_EXEC"
bc_test="@printf 'No bc tests to run\\\\n'"
test_bc_history_prereqs=" test_bc_history_skip"
timeconst="@printf 'timeconst cannot be run because bc is not built\\\\n'"
install_prereqs=" install_execs"
install_man_prereqs=" install_dc_manpage"
uninstall_prereqs=" uninstall_dc"
uninstall_man_prereqs=" uninstall_dc_manpage"
tests="test_dc test_history"
else
bc=1
dc=1
executables="bc and dc"
karatsuba="@\$(KARATSUBA) 30 0 \$(BC_EXEC)"
karatsuba_test="@\$(KARATSUBA) 1 100 \$(BC_EXEC)"
if [ "$library" -eq 0 ]; then
install_prereqs=" install_execs"
install_man_prereqs=" install_bc_manpage install_dc_manpage"
uninstall_prereqs=" uninstall_bc uninstall_dc"
uninstall_man_prereqs=" uninstall_bc_manpage uninstall_dc_manpage"
else
install_prereqs=" install_library install_bcl_header"
install_man_prereqs=" install_bcl_manpage"
uninstall_prereqs=" uninstall_library uninstall_bcl_header"
uninstall_man_prereqs=" uninstall_bcl_manpage"
tests="test_library"
fi
second_target_prereqs="$default_target_prereqs"
default_target_prereqs="$second_target"
default_target_cmd="\$(LINK) \$(BIN) \$(EXEC_PREFIX)\$(DC)"
fi
# We need specific stuff for fuzzing.
if [ "$fuzz" -ne 0 ]; then
debug=1
hist=0
nls=0
optimization="3"
fi
# This sets some necessary things for debug mode.
if [ "$debug" -eq 1 ]; then
if [ -z "$CFLAGS" ] && [ -z "$optimization" ]; then
CFLAGS="-O0"
fi
CFLAGS="-g $CFLAGS"
else
CPPFLAGS="-DNDEBUG $CPPFLAGS"
if [ "$strip_bin" -ne 0 ]; then
LDFLAGS="-s $LDFLAGS"
fi
fi
# Set optimization CFLAGS.
if [ -n "$optimization" ]; then
CFLAGS="-O$optimization $CFLAGS"
fi
# Set test coverage defaults.
if [ "$coverage" -eq 1 ]; then
if [ "$bc_only" -eq 1 ] || [ "$dc_only" -eq 1 ]; then
usage "Can only specify -c without -b or -d"
fi
CFLAGS="-fprofile-arcs -ftest-coverage -g -O0 $CFLAGS"
CPPFLAGS="-DNDEBUG $CPPFLAGS"
COVERAGE_OUTPUT="@gcov -pabcdf \$(GCDA) \$(BC_GCDA) \$(DC_GCDA) \$(HISTORY_GCDA) \$(RAND_GCDA)"
COVERAGE_OUTPUT="$COVERAGE_OUTPUT;\$(RM) -f \$(GEN)*.gc*"
COVERAGE_OUTPUT="$COVERAGE_OUTPUT;gcovr --exclude-unreachable-branches --exclude-throw-branches --html-details --output index.html"
COVERAGE_PREREQS=" test coverage_output"
else
COVERAGE_OUTPUT="@printf 'Coverage not generated\\\\n'"
COVERAGE_PREREQS=""
fi
# Set some defaults.
if [ -z "${DESTDIR+set}" ]; then
destdir=""
else
destdir="DESTDIR = $DESTDIR"
fi
if [ -z "${PREFIX+set}" ]; then
PREFIX="/usr/local"
fi
if [ -z "${BINDIR+set}" ]; then
BINDIR="$PREFIX/bin"
fi
if [ -z "${INCLUDEDIR+set}" ]; then
INCLUDEDIR="$PREFIX/include"
fi
if [ -z "${LIBDIR+set}" ]; then
LIBDIR="$PREFIX/lib"
fi
# Set a default for the DATAROOTDIR. This is done if either manpages will be
# installed, or locales are enabled because that's probably where NLS_PATH
# points.
if [ "$install_manpages" -ne 0 ] || [ "$nls" -ne 0 ]; then
if [ -z "${DATAROOTDIR+set}" ]; then
DATAROOTDIR="$PREFIX/share"
fi
fi
# Set defaults for manpage environment variables.
if [ "$install_manpages" -ne 0 ]; then
if [ -z "${DATADIR+set}" ]; then
DATADIR="$DATAROOTDIR"
fi
if [ -z "${MANDIR+set}" ]; then
MANDIR="$DATADIR/man"
fi
if [ -z "${MAN1DIR+set}" ]; then
MAN1DIR="$MANDIR/man1"
fi
if [ -z "${MAN3DIR+set}" ]; then
MAN3DIR="$MANDIR/man3"
fi
else
install_man_prereqs=""
uninstall_man_prereqs=""
fi
# Here is where we test NLS (the locale system). This is done by trying to
# compile src/vm.c, which has the relevant code. If it fails, then it is
# disabled.
if [ "$nls" -ne 0 ]; then
set +e
printf 'Testing NLS...\n'
flags="-DBC_ENABLE_NLS=1 -DBC_ENABLED=$bc -DDC_ENABLED=$dc"
flags="$flags -DBC_ENABLE_HISTORY=$hist -DBC_ENABLE_LIBRARY=0 -DBC_ENABLE_AFL=0"
flags="$flags -DBC_ENABLE_EXTRA_MATH=$extra_math -I./include/"
flags="$flags -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700"
"$CC" $CPPFLAGS $CFLAGS $flags -c "src/vm.c" -o "$scriptdir/vm.o" > /dev/null 2>&1
err="$?"
rm -rf "$scriptdir/vm.o"
# If this errors, it is probably because of building on Windows,
# and NLS is not supported on Windows, so disable it.
if [ "$err" -ne 0 ]; then
printf 'NLS does not work.\n'
if [ $force -eq 0 ]; then
printf 'Disabling NLS...\n\n'
nls=0
else
printf 'Forcing NLS...\n\n'
fi
else
printf 'NLS works.\n\n'
printf 'Testing gencat...\n'
gencat "$scriptdir/en_US.cat" "$scriptdir/locales/en_US.msg" > /dev/null 2>&1
err="$?"
rm -rf "$scriptdir/en_US.cat"
if [ "$err" -ne 0 ]; then
printf 'gencat does not work.\n'
if [ $force -eq 0 ]; then
printf 'Disabling NLS...\n\n'
nls=0
else
printf 'Forcing NLS...\n\n'
fi
else
printf 'gencat works.\n\n'
# It turns out that POSIX locales are really terrible, and running
# gencat on one machine is not guaranteed to make those cat files
# portable to another machine, so we had better warn the user here.
if [ "$HOSTCC" != "$CC" ] || [ "$OLDHOSTCFLAGS" != "$OLDCFLAGS" ]; then
printf 'Cross-compile detected.\n\n'
printf 'WARNING: Catalog files generated with gencat may not be portable\n'
printf ' across different architectures.\n\n'
fi
if [ -z "$NLSPATH" ]; then
NLSPATH="/usr/share/locale/%L/%N"
fi
install_locales_prereqs=" install_locales"
uninstall_locales_prereqs=" uninstall_locales"
fi
fi
set -e
else
install_locales_prereqs=""
uninstall_locales_prereqs=""
all_locales=0
fi
if [ "$nls" -ne 0 ] && [ "$all_locales" -ne 0 ]; then
install_locales="\$(LOCALE_INSTALL) -l \$(NLSPATH) \$(MAIN_EXEC) \$(DESTDIR)"
else
install_locales="\$(LOCALE_INSTALL) \$(NLSPATH) \$(MAIN_EXEC) \$(DESTDIR)"
fi
# Like the above tested locale support, this tests history.
if [ "$hist" -eq 1 ]; then
set +e
printf 'Testing history...\n'
flags="-DBC_ENABLE_HISTORY=1 -DBC_ENABLED=$bc -DDC_ENABLED=$dc"
flags="$flags -DBC_ENABLE_NLS=$nls -DBC_ENABLE_LIBRARY=0 -DBC_ENABLE_AFL=0"
flags="$flags -DBC_ENABLE_EXTRA_MATH=$extra_math -I./include/"
flags="$flags -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700"
"$CC" $CPPFLAGS $CFLAGS $flags -c "src/history.c" -o "$scriptdir/history.o" > /dev/null 2>&1
err="$?"
rm -rf "$scriptdir/history.o"
# If this errors, it is probably because of building on Windows,
# and history is not supported on Windows, so disable it.
if [ "$err" -ne 0 ]; then
printf 'History does not work.\n'
if [ $force -eq 0 ]; then
printf 'Disabling history...\n\n'
hist=0
else
printf 'Forcing history...\n\n'
fi
else
printf 'History works.\n\n'
fi
set -e
fi
# We have to disable the history tests if it is disabled or valgrind is on.
if [ "$hist" -eq 0 ] || [ "$vg" -ne 0 ]; then
test_bc_history_prereqs=" test_bc_history_skip"
test_dc_history_prereqs=" test_dc_history_skip"
history_tests="@printf 'Skipping history tests...\\\\n'"
else
history_tests="@printf '\$(TEST_STARS)\\\\n\\\\nRunning history tests...\\\\n\\\\n' \&\& tests/history.sh bc -a \&\& tests/history.sh dc -a \&\& printf '\\\\nAll history tests passed.\\\\n\\\\n\$(TEST_STARS)\\\\n'"
fi
# Test OpenBSD. This is not in an if statement because regardless of whatever
# the user says, we need to know if we are on OpenBSD to activate _BSD_SOURCE.
# No, I cannot `#define _BSD_SOURCE` in a header because OpenBSD's patched GCC
# and Clang complain that that is only allowed for system headers. Sigh....So we
# have to check at configure time and set it on the compiler command-line. And
# we have to set it because we also set _POSIX_C_SOURCE, which OpenBSD headers
# detect, and when they detect it, they turn off _BSD_SOURCE unless it is
# specifically requested.
set +e
printf 'Testing for OpenBSD...\n'
flags="-DBC_TEST_OPENBSD -DBC_ENABLE_AFL=0"
"$CC" $CPPFLAGS $CFLAGS $flags -I./include -E "include/status.h" > /dev/null 2>&1
err="$?"
if [ "$err" -ne 0 ]; then
printf 'On OpenBSD. Using _BSD_SOURCE.\n\n'
bsd="-D_BSD_SOURCE"
else
printf 'Not on OpenBSD.\n\n'
bsd=""
fi
if [ "$library" -eq 1 ]; then
bc_lib=""
fi
if [ "$extra_math" -eq 1 ] && [ "$bc" -ne 0 ] && [ "$library" -eq 0 ]; then
BC_LIB2_O="\$(GEN_DIR)/lib2.o"
else
BC_LIB2_O=""
fi
# These lines set the appropriate targets based on whether `gen/strgen.c` or
# `gen/strgen.sh` is used.
GEN="strgen"
GEN_EXEC_TARGET="\$(HOSTCC) \$(HOSTCFLAGS) -o \$(GEN_EXEC) \$(GEN_C)"
CLEAN_PREREQS=" clean_gen clean_coverage"
if [ -z "${GEN_HOST+set}" ]; then
GEN_HOST=1
else
if [ "$GEN_HOST" -eq 0 ]; then
GEN="strgen.sh"
GEN_EXEC_TARGET="@printf 'Do not need to build gen/strgen.c\\\\n'"
CLEAN_PREREQS=" clean_coverage"
fi
fi
manpage_args=""
unneeded=""
headers="\$(HEADERS)"
# This series of if statements figure out what source files are *not* needed.
if [ "$extra_math" -eq 0 ]; then
manpage_args="E"
unneeded="$unneeded rand.c"
else
headers="$headers \$(EXTRA_MATH_HEADERS)"
fi
# All of these next if statements set the build type and mark certain source
# files as unneeded so that they won't have targets generated for them.
if [ "$hist" -eq 0 ]; then
manpage_args="${manpage_args}H"
unneeded="$unneeded history.c"
else
headers="$headers \$(HISTORY_HEADERS)"
fi
if [ "$nls" -eq 0 ]; then
manpage_args="${manpage_args}N"
fi
if [ "$bc" -eq 0 ]; then
unneeded="$unneeded bc.c bc_lex.c bc_parse.c"
else
headers="$headers \$(BC_HEADERS)"
fi
if [ "$dc" -eq 0 ]; then
unneeded="$unneeded dc.c dc_lex.c dc_parse.c"
else
headers="$headers \$(DC_HEADERS)"
fi
if [ "$library" -ne 0 ]; then
unneeded="$unneeded args.c opt.c read.c file.c main.c"
unneeded="$unneeded lang.c lex.c parse.c program.c"
unneeded="$unneeded bc.c bc_lex.c bc_parse.c"
unneeded="$unneeded dc.c dc_lex.c dc_parse.c"
headers="$headers \$(LIBRARY_HEADERS)"
else
unneeded="$unneeded library.c"
fi
# library.c is not needed under normal circumstances.
if [ "$unneeded" = "" ]; then
unneeded="library.c"
fi
# This sets the appropriate manpage for a full build.
if [ "$manpage_args" = "" ]; then
manpage_args="A"
fi
if [ "$vg" -ne 0 ]; then
memcheck=1
fi
if [ "$bc_default_prompt" = "" ]; then
bc_default_prompt="$bc_default_tty_mode"
fi
if [ "$dc_default_prompt" = "" ]; then
dc_default_prompt="$dc_default_tty_mode"
fi
# Generate the test targets and prerequisites.
bc_tests=$(gen_test_targets bc)
bc_script_tests=$(gen_script_test_targets bc)
dc_tests=$(gen_test_targets dc)
dc_script_tests=$(gen_script_test_targets dc)
# Print out the values; this is for debugging.
if [ "$bc" -ne 0 ]; then
printf 'Building bc\n'
else
printf 'Not building bc\n'
fi
if [ "$dc" -ne 0 ]; then
printf 'Building dc\n'
else
printf 'Not building dc\n'
fi
printf '\n'
printf 'BC_ENABLE_LIBRARY=%s\n\n' "$library"
printf 'BC_ENABLE_HISTORY=%s\n' "$hist"
printf 'BC_ENABLE_EXTRA_MATH=%s\n' "$extra_math"
printf 'BC_ENABLE_NLS=%s\n' "$nls"
printf 'BC_ENABLE_AFL=%s\n' "$fuzz"
printf '\n'
printf 'BC_NUM_KARATSUBA_LEN=%s\n' "$karatsuba_len"
printf '\n'
printf 'CC=%s\n' "$CC"
printf 'CFLAGS=%s\n' "$CFLAGS"
printf 'HOSTCC=%s\n' "$HOSTCC"
printf 'HOSTCFLAGS=%s\n' "$HOSTCFLAGS"
printf 'CPPFLAGS=%s\n' "$CPPFLAGS"
printf 'LDFLAGS=%s\n' "$LDFLAGS"
printf 'PREFIX=%s\n' "$PREFIX"
printf 'BINDIR=%s\n' "$BINDIR"
printf 'INCLUDEDIR=%s\n' "$INCLUDEDIR"
printf 'LIBDIR=%s\n' "$LIBDIR"
printf 'DATAROOTDIR=%s\n' "$DATAROOTDIR"
printf 'DATADIR=%s\n' "$DATADIR"
printf 'MANDIR=%s\n' "$MANDIR"
printf 'MAN1DIR=%s\n' "$MAN1DIR"
printf 'MAN3DIR=%s\n' "$MAN3DIR"
printf 'NLSPATH=%s\n' "$NLSPATH"
printf 'EXECSUFFIX=%s\n' "$EXECSUFFIX"
printf 'EXECPREFIX=%s\n' "$EXECPREFIX"
printf 'DESTDIR=%s\n' "$DESTDIR"
printf 'LONG_BIT=%s\n' "$LONG_BIT"
printf 'GEN_HOST=%s\n' "$GEN_HOST"
printf 'GEN_EMU=%s\n' "$GEN_EMU"
printf '\n'
printf 'Setting Defaults\n'
printf '================\n'
printf 'bc.banner=%s\n' "$bc_default_banner"
printf 'bc.sigint_reset=%s\n' "$bc_default_sigint_reset"
printf 'dc.sigint_reset=%s\n' "$dc_default_sigint_reset"
printf 'bc.tty_mode=%s\n' "$bc_default_tty_mode"
printf 'dc.tty_mode=%s\n' "$dc_default_tty_mode"
printf 'bc.prompt=%s\n' "$bc_default_prompt"
printf 'dc.prompt=%s\n' "$dc_default_prompt"
# This is where the real work begins. This is the point at which the Makefile.in
# template is edited and output to the Makefile.
contents=$(cat "$scriptdir/Makefile.in")
needle="WARNING"
replacement='*** WARNING: Autogenerated from Makefile.in. DO NOT MODIFY ***'
contents=$(replace "$contents" "$needle" "$replacement")
# The contents are edited to have the list of files to build.
contents=$(gen_file_list "$contents" $unneeded)
SRC_TARGETS=""
# This line and loop generates the individual targets for source files. I used
# to just use an implicit target, but that was found to be inadequate when I
# added the library.
src_files=$(find_src_files $unneeded)
for f in $src_files; do
o=$(replace_ext "$f" "c" "o")
SRC_TARGETS=$(printf '%s\n\n%s: %s %s\n\t$(CC) $(CFLAGS) -o %s -c %s\n' \
"$SRC_TARGETS" "$o" "$headers" "$f" "$o" "$f")
done
# Replace all the placeholders.
contents=$(replace "$contents" "HEADERS" "$headers")
contents=$(replace "$contents" "BC_ENABLED" "$bc")
contents=$(replace "$contents" "DC_ENABLED" "$dc")
contents=$(replace "$contents" "BC_ALL_TESTS" "$bc_test")
contents=$(replace "$contents" "BC_TESTS" "$bc_tests")
contents=$(replace "$contents" "BC_SCRIPT_TESTS" "$bc_script_tests")
contents=$(replace "$contents" "BC_TEST_EXEC" "$bc_test_exec")
contents=$(replace "$contents" "TIMECONST_ALL_TESTS" "$timeconst")
contents=$(replace "$contents" "DC_ALL_TESTS" "$dc_test")
contents=$(replace "$contents" "DC_TESTS" "$dc_tests")
contents=$(replace "$contents" "DC_SCRIPT_TESTS" "$dc_script_tests")
contents=$(replace "$contents" "DC_TEST_EXEC" "$dc_test_exec")
contents=$(replace "$contents" "BUILD_TYPE" "$manpage_args")
contents=$(replace "$contents" "LIBRARY" "$library")
contents=$(replace "$contents" "HISTORY" "$hist")
contents=$(replace "$contents" "EXTRA_MATH" "$extra_math")
contents=$(replace "$contents" "NLS" "$nls")
contents=$(replace "$contents" "FUZZ" "$fuzz")
contents=$(replace "$contents" "MEMCHECK" "$memcheck")
contents=$(replace "$contents" "BC_LIB_O" "$bc_lib")
contents=$(replace "$contents" "BC_HELP_O" "$bc_help")
contents=$(replace "$contents" "DC_HELP_O" "$dc_help")
contents=$(replace "$contents" "BC_LIB2_O" "$BC_LIB2_O")
contents=$(replace "$contents" "KARATSUBA_LEN" "$karatsuba_len")
contents=$(replace "$contents" "NLSPATH" "$NLSPATH")
contents=$(replace "$contents" "DESTDIR" "$destdir")
contents=$(replace "$contents" "EXECSUFFIX" "$EXECSUFFIX")
contents=$(replace "$contents" "EXECPREFIX" "$EXECPREFIX")
contents=$(replace "$contents" "BINDIR" "$BINDIR")
contents=$(replace "$contents" "INCLUDEDIR" "$INCLUDEDIR")
contents=$(replace "$contents" "LIBDIR" "$LIBDIR")
contents=$(replace "$contents" "MAN1DIR" "$MAN1DIR")
contents=$(replace "$contents" "MAN3DIR" "$MAN3DIR")
contents=$(replace "$contents" "CFLAGS" "$CFLAGS")
contents=$(replace "$contents" "HOSTCFLAGS" "$HOSTCFLAGS")
contents=$(replace "$contents" "CPPFLAGS" "$CPPFLAGS")
contents=$(replace "$contents" "LDFLAGS" "$LDFLAGS")
contents=$(replace "$contents" "CC" "$CC")
contents=$(replace "$contents" "HOSTCC" "$HOSTCC")
contents=$(replace "$contents" "COVERAGE_OUTPUT" "$COVERAGE_OUTPUT")
contents=$(replace "$contents" "COVERAGE_PREREQS" "$COVERAGE_PREREQS")
contents=$(replace "$contents" "INSTALL_PREREQS" "$install_prereqs")
contents=$(replace "$contents" "INSTALL_MAN_PREREQS" "$install_man_prereqs")
contents=$(replace "$contents" "INSTALL_LOCALES" "$install_locales")
contents=$(replace "$contents" "INSTALL_LOCALES_PREREQS" "$install_locales_prereqs")
contents=$(replace "$contents" "UNINSTALL_MAN_PREREQS" "$uninstall_man_prereqs")
contents=$(replace "$contents" "UNINSTALL_PREREQS" "$uninstall_prereqs")
contents=$(replace "$contents" "UNINSTALL_LOCALES_PREREQS" "$uninstall_locales_prereqs")
contents=$(replace "$contents" "DEFAULT_TARGET" "$default_target")
contents=$(replace "$contents" "DEFAULT_TARGET_PREREQS" "$default_target_prereqs")
contents=$(replace "$contents" "DEFAULT_TARGET_CMD" "$default_target_cmd")
contents=$(replace "$contents" "SECOND_TARGET" "$second_target")
contents=$(replace "$contents" "SECOND_TARGET_PREREQS" "$second_target_prereqs")
contents=$(replace "$contents" "SECOND_TARGET_CMD" "$second_target_cmd")
contents=$(replace "$contents" "ALL_PREREQ" "$ALL_PREREQ")
contents=$(replace "$contents" "BC_EXEC_PREREQ" "$bc_exec_prereq")
contents=$(replace "$contents" "BC_EXEC_CMD" "$bc_exec_cmd")
contents=$(replace "$contents" "DC_EXEC_PREREQ" "$dc_exec_prereq")
contents=$(replace "$contents" "DC_EXEC_CMD" "$dc_exec_cmd")
contents=$(replace "$contents" "EXECUTABLES" "$executables")
contents=$(replace "$contents" "MAIN_EXEC" "$main_exec")
contents=$(replace "$contents" "EXEC" "$executable")
contents=$(replace "$contents" "TESTS" "$tests")
contents=$(replace "$contents" "BC_TEST" "$bc_test")
contents=$(replace "$contents" "BC_HISTORY_TEST_PREREQS" "$test_bc_history_prereqs")
contents=$(replace "$contents" "DC_TEST" "$dc_test")
contents=$(replace "$contents" "DC_HISTORY_TEST_PREREQS" "$test_dc_history_prereqs")
contents=$(replace "$contents" "HISTORY_TESTS" "$history_tests")
contents=$(replace "$contents" "VG_BC_TEST" "$vg_bc_test")
contents=$(replace "$contents" "VG_DC_TEST" "$vg_dc_test")
contents=$(replace "$contents" "TIMECONST" "$timeconst")
contents=$(replace "$contents" "KARATSUBA" "$karatsuba")
contents=$(replace "$contents" "KARATSUBA_TEST" "$karatsuba_test")
contents=$(replace "$contents" "LONG_BIT" "$LONG_BIT")
contents=$(replace "$contents" "LONG_BIT_DEFINE" "$LONG_BIT_DEFINE")
contents=$(replace "$contents" "GEN" "$GEN")
contents=$(replace "$contents" "GEN_EXEC_TARGET" "$GEN_EXEC_TARGET")
contents=$(replace "$contents" "CLEAN_PREREQS" "$CLEAN_PREREQS")
contents=$(replace "$contents" "GEN_EMU" "$GEN_EMU")
contents=$(replace "$contents" "BSD" "$bsd")
contents=$(replace "$contents" "BC_DEFAULT_BANNER" "$bc_default_banner")
contents=$(replace "$contents" "BC_DEFAULT_SIGINT_RESET" "$bc_default_sigint_reset")
contents=$(replace "$contents" "DC_DEFAULT_SIGINT_RESET" "$dc_default_sigint_reset")
contents=$(replace "$contents" "BC_DEFAULT_TTY_MODE" "$bc_default_tty_mode")
contents=$(replace "$contents" "DC_DEFAULT_TTY_MODE" "$dc_default_tty_mode")
contents=$(replace "$contents" "BC_DEFAULT_PROMPT" "$bc_default_prompt")
contents=$(replace "$contents" "DC_DEFAULT_PROMPT" "$dc_default_prompt")
# Do the first print to the Makefile.
printf '%s\n%s\n\n' "$contents" "$SRC_TARGETS" > "$scriptdir/Makefile"
# Generate the individual test targets.
if [ "$bc" -ne 0 ]; then
gen_tests bc "$extra_math" "$time_tests" $bc_test_exec
gen_script_tests bc "$extra_math" "$generate_tests" "$time_tests" $bc_test_exec
fi
if [ "$dc" -ne 0 ]; then
gen_tests dc "$extra_math" "$time_tests" $dc_test_exec
gen_script_tests dc "$extra_math" "$generate_tests" "$time_tests" $dc_test_exec
fi
cd "$scriptdir"
# Copy the correct manuals to the expected places.
cp -f manuals/bc/$manpage_args.1.md manuals/bc.1.md
cp -f manuals/bc/$manpage_args.1 manuals/bc.1
cp -f manuals/dc/$manpage_args.1.md manuals/dc.1.md
cp -f manuals/dc/$manpage_args.1 manuals/dc.1
make clean > /dev/null
