.\" opieftpd.8: Manual page describing the FTP daemon.
.\"
.\" %%% portions-copyright-cmetz-98
.\" Portions of this software are Copyright 1998-1999 by Craig Metz, All Rights
.\" Reserved. The Inner Net License Version 2 applies to these portions of
.\" the software.
.\" You should have received a copy of the license with this software. If
.\" you didn't get a copy, you may request one from <license@inner.net>.
.\"
.\"
.\" Portions of this software are Copyright 1995 by Randall Atkinson and Dan
.\" McDonald, All Rights Reserved. All Rights under this copyright are assigned
.\" to the U.S. Naval Research Laboratory (NRL). The NRL Copyright Notice and
.\" License Agreement applies to this software.
.\"
.\" History:
.\"
.\" Modified by cmetz for OPIE 2.4. Document -u option.
.\" Modified at NRL for OPIE 2.0.
.\" Originally from BSD.
.\"
.\" NOTE:
.\"
.\" This manual page uses the BSD >= Net/2 "mandoc" macros and may not
.\" format properly on all systems.
.\"
.\" Copyright (c) 1985, 1988, 1991 The Regents of the University of California.
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\" must display the following acknowledgement:
.\" This product includes software developed by the University of
.\" California, Berkeley and its contributors.
.\" 4. Neither the name of the University nor the names of its contributors
.\" may be used to endorse or promote products derived from this software
.\" without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" @(#)opieopieftpd.8 6.9 (Berkeley) 3/16/91
.\"
.TH OPIEFTPD 8 "10 January 1995"
.SH NAME
opieftpd \- File Transfer Protocol server that uses OPIE authentication
.SH SYNOPSIS
.B opieftpd
[\-d] [\-l] [\-t
.I timeout
] [\-T
.I maxtimeout
] [\-u
.I umask
]
.SH DESCRIPTION
.I opieftpd
is the Internet File Transfer Protocol server process. The server uses the
TCP protocol and listens at the port specified in the ftp service
specification; see
.IR services (5).
.SH OPTIONS
.TP
.B \-d
Debugging information is written to the system logs.
.TP
.B \-l
Each
.IR ftp (1)
session is logged in the system logs.
.TP
.B \-t
The inactivity timeout period is set to
.I timeout
seconds (the default is 15 minutes).
.TP
.B \-T
A client may also request a different timeout period;
the maximum period allowed may be set to
.I maxtimeout
seconds with the
.B \-T
option. The default limit is 2 hours.
.B \-u
Set the default umask value to
.I umask.
.SH COMMANDS
The ftp server currently supports the following ftp
requests; case is not distinguished:
.PP
.nf
.ta \w'Request 'u
Request Description
ABOR abort previous command
ACCT specify account (ignored)
ALLO allocate storage (vacuously)
APPE append to a file
CDUP change to parent of current working directory
CWD change working directory
DELE delete a file
HELP give help information
LIST give a list of files in a directory
MKD make a directory
MDTM show last modification time of file
MODE specify data transfer mode
NLST give name list of files in directory
NOOP do nothing
PASS specify password
PASV prepare for server-to-server transfer
PORT specify data connection port
PWD print the current working directory
QUIT terminate session
REST restart incomplete transfer
RETR retrieve a file
RMD remove a directory
RNFR specify rename-from file name
RNTO specify rename-to file name
SITE non-standard commands (see next section)
SIZE return size of file
STAT return status of server
STOR store a file
STOU store a file with a unique name
STRU specify data transfer structure
SYST show operating system type of server system
TYPE specify data transfer type
USER specify user name
XCUP change to parent of current working directory (deprecated)
XCWD change working directory (deprecated)
XMKD make a directory (deprecated)
XPWD print the current working directory (deprecated)
XRMD remove a directory (deprecated)
.fi
The following non-standard or UNIX-specific commands are supported
by the SITE request:
.PP
.nf
.ta \w'Request 'u
Request Description
UMASK change umask (e.g. SITE UMASK 002)
IDLE set idle-timer (e.g. SITE IDLE 60)
CHMOD change mode of a file (e.g. SITE CHMOD 755 file)
HELP give help information (e.g. SITE HELP)
.fi
.sp
The remaining ftp requests specified in Internet RFC-959 are
recognized, but not implemented.
.sp
MDTM and SIZE are not specified in RFC-959, but will appear
in the next updated FTP RFC.
The ftp server will abort an active file transfer only when the
ABOR command is preceded by a Telnet "Interrupt Process" (IP)
signal and a Telnet "Synch" signal in the command Telnet stream,
as described in Internet RFC-959.
If a STAT command is received during a data transfer, preceded by
a Telnet IP and Synch, transfer status will be returned.
.I opieftpd
interprets file names according to the globbing conventions used by
.IR csh (1).
This allows users to utilize the metacharacters
\&*?[]{}~.
.sp
.I opieftpd
authenticates users according to three rules:
.sp
The user name must be in the password data base,
.I /etc/passwd,
and not have a null password. In this case, a password
must be provided by the client before any file operations
may be performed.
.sp
The user name must not appear in the file
.I /etc/ftpusers.
.sp
The user must have a standard shell returned by
.IR getusershell (3).
.sp
If the user name is
.I anonymous
or
.I ftp,
an anonymous ftp account must be present in the password
file (user
.I ftp ).
In this case, the user is allowed to log in by specifying any
password (by convention, this is given as the client host's name).
In the last case,
.I opieftpd
takes special measures to restrict the client's access privileges.
The server performs a
.IR chroot (2)
command to the home directory of the
.I ftp
user.
In order that system security is not breached, it is recommended
that the
.I ftp
subtree be constructed with care; the following
rules are recommended:
.sp
.TP
.B ~ftp
Make the home directory owned by
.I ftp
and unwritable by anyone.
.TP
.B ~ftp/bin
Make this directory owned by the super-user and unwritable by
anyone. The program
.IR ls (1)
must be present to support the LIST command. This
program should have mode 111.
.TP
.B ~ftp/etc
Make this directory owned by the super-user and unwritable by
anyone. The files
.IR passwd (5)
and
.IR group (5)
must be present for the
.IR ls (1)
command to be able to produce owner names rather than numbers.
The password field in
.I passwd
is not used, and should not contain real encrypted passwords.
These files should be mode 444.
.TP
.B ~ftp/pub
Make this directory mode 777 and owned by
.I ftp.
Users should then place files which are to be accessible via the
anonymous account in this directory.
.SH SEE ALSO
.BR ftpd (8),
.BR ftp (1),
.BR opie (4),
.BR opiekey (1),
.BR opiepasswd (1),
.BR opieinfo (1),
.BR opiesu (1),
.BR opieftpd (8),
.BR opiekeys (5),
.BR opieaccess (5)
.SH BUGS
The anonymous account is inherently dangerous and should
avoided when possible. In
.I opieftpd,
it is a compile-time option that should be disabled if it is not
being used.
The server must run as the super-user
to create sockets with privileged port numbers. It maintains
an effective user id of the logged in user, reverting to
the super-user only when binding addresses to sockets. The
possible security holes have been scrutinized, but are possibly incomplete.
.SH HISTORY
The
.I ftpd
command appeared in 4.2BSD.
.SH AUTHOR
Originally written for BSD,
.I ftpd
was modified at NRL by Randall Atkinson, Dan McDonald, and Craig Metz to
support OTP authentication.
.SH CONTACT
OPIE is discussed on the Bellcore "S/Key Users" mailing list. To join,
send an email request to:
.sp
skey-users-request@thumper.bellcore.com
