/*-
* Copyright (c) 1991 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* William Jolitz.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)isa.c 7.2 (Berkeley) 5/13/91
* $Id: intr_machdep.c,v 1.2 1997/06/02 15:28:10 kato Exp $
*/
#include "opt_auto_eoi.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/buf.h>
#include <sys/syslog.h>
#include <sys/malloc.h>
#include <machine/ipl.h>
#include <machine/md_var.h>
#include <machine/segments.h>
#if defined(APIC_IO)
#include <machine/smp.h>
#include <machine/apic.h>
#endif /* APIC_IO */
#include <vm/vm.h>
#include <vm/vm_param.h>
#include <vm/pmap.h>
#include <i386/isa/isa_device.h>
#ifdef PC98
#include <pc98/pc98/pc98.h>
#include <pc98/pc98/pc98_machdep.h>
#include <pc98/pc98/epsonio.h>
#else
#include <i386/isa/isa.h>
#endif
#include <i386/isa/icu.h>
#include <i386/isa/ic/i8237.h>
#include "vector.h"
#include <i386/isa/intr_machdep.h>
#include <sys/interrupt.h>
/* XXX should be in suitable include files */
#ifdef PC98
#define ICU_IMR_OFFSET 2 /* IO_ICU{1,2} + 2 */
#define ICU_SLAVEID 7
#else
#define ICU_IMR_OFFSET 1 /* IO_ICU{1,2} + 1 */
#define ICU_SLAVEID 2
#endif
#ifdef APIC_IO
/*
* This is to accommodate "mixed-mode" programming for
* motherboards that don't connect the 8254 to the IO APIC.
*/
#define AUTO_EOI_1
#endif
u_long *intr_countp[ICU_LEN];
inthand2_t *intr_handler[ICU_LEN];
u_int intr_mask[ICU_LEN];
u_int* intr_mptr[ICU_LEN];
int intr_unit[ICU_LEN];
static inthand_t *fastintr[ICU_LEN] = {
&IDTVEC(fastintr0), &IDTVEC(fastintr1),
&IDTVEC(fastintr2), &IDTVEC(fastintr3),
&IDTVEC(fastintr4), &IDTVEC(fastintr5),
&IDTVEC(fastintr6), &IDTVEC(fastintr7),
&IDTVEC(fastintr8), &IDTVEC(fastintr9),
&IDTVEC(fastintr10), &IDTVEC(fastintr11),
&IDTVEC(fastintr12), &IDTVEC(fastintr13),
&IDTVEC(fastintr14), &IDTVEC(fastintr15)
#if defined(APIC_IO)
, &IDTVEC(fastintr16), &IDTVEC(fastintr17),
&IDTVEC(fastintr18), &IDTVEC(fastintr19),
&IDTVEC(fastintr20), &IDTVEC(fastintr21),
&IDTVEC(fastintr22), &IDTVEC(fastintr23)
#endif /* APIC_IO */
};
static inthand_t *slowintr[ICU_LEN] = {
&IDTVEC(intr0), &IDTVEC(intr1), &IDTVEC(intr2), &IDTVEC(intr3),
&IDTVEC(intr4), &IDTVEC(intr5), &IDTVEC(intr6), &IDTVEC(intr7),
&IDTVEC(intr8), &IDTVEC(intr9), &IDTVEC(intr10), &IDTVEC(intr11),
&IDTVEC(intr12), &IDTVEC(intr13), &IDTVEC(intr14), &IDTVEC(intr15)
#if defined(APIC_IO)
, &IDTVEC(intr16), &IDTVEC(intr17), &IDTVEC(intr18), &IDTVEC(intr19),
&IDTVEC(intr20), &IDTVEC(intr21), &IDTVEC(intr22), &IDTVEC(intr23)
#endif /* APIC_IO */
};
static inthand2_t isa_strayintr;
#ifdef PC98
#define NMI_PARITY 0x04
#define NMI_EPARITY 0x02
#else
#define NMI_PARITY (1 << 7)
#define NMI_IOCHAN (1 << 6)
#define ENMI_WATCHDOG (1 << 7)
#define ENMI_BUSTIMER (1 << 6)
#define ENMI_IOSTATUS (1 << 5)
#endif
/*
* Handle a NMI, possibly a machine check.
* return true to panic system, false to ignore.
*/
int
isa_nmi(cd)
int cd;
{
#ifdef PC98
int port = inb(0x33);
if (epson_machine_id == 0x20)
epson_outb(0xc16, epson_inb(0xc16) | 0x1);
if (port & NMI_PARITY) {
panic("BASE RAM parity error, likely hardware failure.");
} else if (port & NMI_EPARITY) {
panic("EXTENDED RAM parity error, likely hardware failure.");
} else {
printf("\nNMI Resume ??\n");
return(0);
}
#else /* IBM-PC */
int isa_port = inb(0x61);
int eisa_port = inb(0x461);
if(isa_port & NMI_PARITY) {
panic("RAM parity error, likely hardware failure.");
} else if(isa_port & NMI_IOCHAN) {
panic("I/O channel check, likely hardware failure.");
} else if(eisa_port & ENMI_WATCHDOG) {
panic("EISA watchdog timer expired, likely hardware failure.");
} else if(eisa_port & ENMI_BUSTIMER) {
panic("EISA bus timeout, likely hardware failure.");
} else if(eisa_port & ENMI_IOSTATUS) {
panic("EISA I/O port status error.");
} else {
printf("\nNMI ISA %x, EISA %x\n", isa_port, eisa_port);
return(0);
}
#endif
}
/*
* Fill in default interrupt table (in case of spuruious interrupt
* during configuration of kernel, setup interrupt control unit
*/
void
isa_defaultirq()
{
int i;
/* icu vectors */
for (i = 0; i < ICU_LEN; i++)
icu_unset(i, (inthand2_t *)NULL);
/* initialize 8259's */
outb(IO_ICU1, 0x11); /* reset; program device, four bytes */
outb(IO_ICU1+ICU_IMR_OFFSET, NRSVIDT); /* starting at this vector index */
outb(IO_ICU1+ICU_IMR_OFFSET, IRQ_SLAVE); /* slave on line 7 */
#ifdef PC98
#ifdef AUTO_EOI_1
outb(IO_ICU1+ICU_IMR_OFFSET, 0x1f); /* (master) auto EOI, 8086 mode */
#else
outb(IO_ICU1+ICU_IMR_OFFSET, 0x1d); /* (master) 8086 mode */
#endif
#else /* IBM-PC */
#ifdef AUTO_EOI_1
outb(IO_ICU1+ICU_IMR_OFFSET, 2 | 1); /* auto EOI, 8086 mode */
#else
outb(IO_ICU1+ICU_IMR_OFFSET, 1); /* 8086 mode */
#endif
#endif /* PC98 */
outb(IO_ICU1+ICU_IMR_OFFSET, 0xff); /* leave interrupts masked */
outb(IO_ICU1, 0x0a); /* default to IRR on read */
#ifndef PC98
outb(IO_ICU1, 0xc0 | (3 - 1)); /* pri order 3-7, 0-2 (com2 first) */
#endif /* !PC98 */
outb(IO_ICU2, 0x11); /* reset; program device, four bytes */
outb(IO_ICU2+ICU_IMR_OFFSET, NRSVIDT+8); /* staring at this vector index */
outb(IO_ICU2+ICU_IMR_OFFSET, ICU_SLAVEID); /* my slave id is 7 */
#ifdef PC98
outb(IO_ICU2+ICU_IMR_OFFSET,9); /* 8086 mode */
#else /* IBM-PC */
#ifdef AUTO_EOI_2
outb(IO_ICU2+ICU_IMR_OFFSET, 2 | 1); /* auto EOI, 8086 mode */
#else
outb(IO_ICU2+ICU_IMR_OFFSET,1); /* 8086 mode */
#endif
#endif /* PC98 */
outb(IO_ICU2+ICU_IMR_OFFSET, 0xff); /* leave interrupts masked */
outb(IO_ICU2, 0x0a); /* default to IRR on read */
}
/*
* Caught a stray interrupt, notify
*/
static void
isa_strayintr(d)
int d;
{
/* DON'T BOTHER FOR NOW! */
/* for some reason, we get bursts of intr #7, even if not enabled! */
/*
* Well the reason you got bursts of intr #7 is because someone
* raised an interrupt line and dropped it before the 8259 could
* prioritize it. This is documented in the intel data book. This
* means you have BAD hardware! I have changed this so that only
* the first 5 get logged, then it quits logging them, and puts
* out a special message. rgrimes 3/25/1993
*/
/*
* XXX TODO print a different message for #7 if it is for a
* glitch. Glitches can be distinguished from real #7's by
* testing that the in-service bit is _not_ set. The test
* must be done before sending an EOI so it can't be done if
* we are using AUTO_EOI_1.
*/
if (intrcnt[NR_DEVICES + d] <= 5)
log(LOG_ERR, "stray irq %d\n", d);
if (intrcnt[NR_DEVICES + d] == 5)
log(LOG_CRIT,
"too many stray irq %d's; not logging any more\n", d);
}
/*
* Return nonzero if a (masked) irq is pending for a given device.
*/
#if defined(APIC_IO)
int
isa_irq_pending(dvp)
struct isa_device *dvp;
{
/* read APIC IRR containing the 16 ISA INTerrupts */
return ((lapic.irr1 & 0x00ffffff)
& (u_int32_t)dvp->id_irq) ? 1 : 0;
}
/*
* an 8259 specific routine,
* for use by boot probes in certain device drivers.
*/
int
icu_irq_pending(dvp)
struct isa_device *dvp;
{
unsigned id_irq;
id_irq = dvp->id_irq;
if (id_irq & 0xff)
return (inb(IO_ICU1) & id_irq);
return (inb(IO_ICU2) & (id_irq >> 8));
}
#else /* APIC_IO */
int
isa_irq_pending(dvp)
struct isa_device *dvp;
{
unsigned id_irq;
id_irq = dvp->id_irq;
if (id_irq & 0xff)
return (inb(IO_ICU1) & id_irq);
return (inb(IO_ICU2) & (id_irq >> 8));
}
#endif /* APIC_IO */
int
update_intr_masks(void)
{
int intr, n=0;
u_int mask,*maskptr;
for (intr=0; intr < ICU_LEN; intr ++) {
#if defined(APIC_IO)
/* no 8259 SLAVE to ignore */
#else
if (intr==ICU_SLAVEID) continue; /* ignore 8259 SLAVE output */
#endif /* APIC_IO */
maskptr = intr_mptr[intr];
if (!maskptr) continue;
*maskptr |= 1 << intr;
mask = *maskptr;
if (mask != intr_mask[intr]) {
#if 0
printf ("intr_mask[%2d] old=%08x new=%08x ptr=%p.\n",
intr, intr_mask[intr], mask, maskptr);
#endif
intr_mask[intr]=mask;
n++;
}
}
return (n);
}
/*
* The find_device_id function is only required because of the way the
* device names are currently stored for reporting in systat or vmstat.
* In fact, those programs should be modified to use the sysctl interface
* to obtain a list of driver names by traversing intreclist_head[irq].
*/
static int
find_device_id(int irq)
{
char buf[16];
char *cp;
int free_id, id;
sprintf(buf, "pci irq%d", irq);
cp = intrnames;
/* default to 0, which corresponds to clk0 */
free_id = 0;
for (id = 0; id < NR_DEVICES; id++) {
if (strcmp(cp, buf) == 0)
return (id);
if (free_id == 0 && strcmp(cp, "pci irqnn") == 0)
free_id = id;
while (*cp++ != '\0');
}
#if 0
if (free_id == 0) {
/*
* All pci irq counters are in use, perhaps because config
* is old so there aren't any. Abuse the clk0 counter.
*/
printf("\tcounting shared irq%d as clk0 irq\n", irq);
}
#endif
return (free_id);
}
void
update_intrname(int intr, int device_id)
{
char *cp;
int id;
if (device_id == -1)
device_id = find_device_id(intr);
if ((u_int)device_id >= NR_DEVICES)
return;
intr_countp[intr] = &intrcnt[device_id];
for (cp = intrnames, id = 0; id <= device_id; id++)
while (*cp++ != '\0')
;
if (cp > eintrnames)
return;
if (intr < 10) {
cp[-3] = intr + '0';
cp[-2] = ' ';
} else if (intr < 20) {
cp[-3] = '1';
cp[-2] = intr - 10 + '0';
} else {
cp[-3] = '2';
cp[-2] = intr - 20 + '0';
}
}
int
icu_setup(int intr, inthand2_t *handler, void *arg, u_int *maskptr, int flags)
{
u_long ef;
u_int mask = (maskptr ? *maskptr : 0);
#if defined(APIC_IO)
if ((u_int)intr >= ICU_LEN) /* no 8259 SLAVE to ignore */
#else
if ((u_int)intr >= ICU_LEN || intr == ICU_SLAVEID)
#endif /* APIC_IO */
if (intr_handler[intr] != isa_strayintr)
return (EBUSY);
ef = read_eflags();
disable_intr();
intr_handler[intr] = handler;
intr_mptr[intr] = maskptr;
intr_mask[intr] = mask | (1 << intr);
intr_unit[intr] = (int) arg;
setidt(ICU_OFFSET + intr,
flags & INTR_FAST ? fastintr[intr] : slowintr[intr],
SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
INTREN(1 << intr);
write_eflags(ef);
return (0);
}
void
register_imask(dvp, mask)
struct isa_device *dvp;
u_int mask;
{
if (dvp->id_alive && dvp->id_irq) {
int intr;
intr = ffs(dvp->id_irq) - 1;
intr_mask[intr] = mask | (1 <<intr);
}
(void) update_intr_masks();
}
int
icu_unset(intr, handler)
int intr;
inthand2_t *handler;
{
u_long ef;
if ((u_int)intr >= ICU_LEN || handler != intr_handler[intr])
return (EINVAL);
INTRDIS(1 << intr);
ef = read_eflags();
disable_intr();
intr_countp[intr] = &intrcnt[NR_DEVICES + intr];
intr_handler[intr] = isa_strayintr;
intr_mptr[intr] = NULL;
intr_mask[intr] = HWI_MASK | SWI_MASK;
intr_unit[intr] = intr;
setidt(ICU_OFFSET + intr, slowintr[intr], SDT_SYS386IGT, SEL_KPL,
GSEL(GCODE_SEL, SEL_KPL));
write_eflags(ef);
return (0);
}
