/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright 2003-2011 Netlogic Microsystems (Netlogic). All rights
* reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY Netlogic Microsystems ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
* NETLOGIC_BSD */
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <net/ethernet.h>
#include <mips/nlm/hal/mips-extns.h>
#include <mips/nlm/hal/haldefs.h>
#include <mips/nlm/hal/iomap.h>
#include <mips/nlm/hal/fmn.h>
#include <mips/nlm/hal/pic.h>
#include <mips/nlm/hal/sys.h>
#include <mips/nlm/hal/nae.h>
#include <mips/nlm/hal/uart.h>
#include <mips/nlm/hal/poe.h>
#include <mips/nlm/xlp.h>
#include <mips/nlm/board.h>
#include <mips/nlm/msgring.h>
static uint8_t board_eeprom_buf[EEPROM_SIZE];
static int board_eeprom_set;
struct xlp_board_info xlp_board_info;
struct vfbid_tbl {
int vfbid;
int dest_vc;
};
/* XXXJC : this should be derived from msg thread mask */
static struct vfbid_tbl nlm_vfbid[] = {
/* NULL FBID should map to cpu0 to detect NAE send msg errors */
{127, 0}, /* NAE <-> NAE mappings */
{51, 1019}, {50, 1018}, {49, 1017}, {48, 1016},
{47, 1015}, {46, 1014}, {45, 1013}, {44, 1012},
{43, 1011}, {42, 1010}, {41, 1009}, {40, 1008},
{39, 1007}, {38, 1006}, {37, 1005}, {36, 1004},
{35, 1003}, {34, 1002}, {33, 1001}, {32, 1000},
/* NAE <-> CPU mappings, freeback got to vc 3 of each thread */
{31, 127}, {30, 123}, {29, 119}, {28, 115},
{27, 111}, {26, 107}, {25, 103}, {24, 99},
{23, 95}, {22, 91}, {21, 87}, {20, 83},
{19, 79}, {18, 75}, {17, 71}, {16, 67},
{15, 63}, {14, 59}, {13, 55}, {12, 51},
{11, 47}, {10, 43}, { 9, 39}, { 8, 35},
{ 7, 31}, { 6, 27}, { 5, 23}, { 4, 19},
{ 3, 15}, { 2, 11}, { 1, 7}, { 0, 3},
};
static struct vfbid_tbl nlm3xx_vfbid[] = {
/* NULL FBID should map to cpu0 to detect NAE send msg errors */
{127, 0}, /* NAE <-> NAE mappings */
{39, 503}, {38, 502}, {37, 501}, {36, 500},
{35, 499}, {34, 498}, {33, 497}, {32, 496},
/* NAE <-> CPU mappings, freeback got to vc 3 of each thread */
{31, 127}, {30, 123}, {29, 119}, {28, 115},
{27, 111}, {26, 107}, {25, 103}, {24, 99},
{23, 95}, {22, 91}, {21, 87}, {20, 83},
{19, 79}, {18, 75}, {17, 71}, {16, 67},
{15, 63}, {14, 59}, {13, 55}, {12, 51},
{11, 47}, {10, 43}, { 9, 39}, { 8, 35},
{ 7, 31}, { 6, 27}, { 5, 23}, { 4, 19},
{ 3, 15}, { 2, 11}, { 1, 7}, { 0, 3},
};
int
nlm_get_vfbid_mapping(int vfbid)
{
int i, nentries;
struct vfbid_tbl *p;
if (nlm_is_xlp3xx()) {
nentries = nitems(nlm3xx_vfbid);
p = nlm3xx_vfbid;
} else {
nentries = nitems(nlm_vfbid);
p = nlm_vfbid;
}
for (i = 0; i < nentries; i++) {
if (p[i].vfbid == vfbid)
return (p[i].dest_vc);
}
return (-1);
}
int
nlm_get_poe_distvec(int vec, uint32_t *distvec)
{
if (vec != 0)
return (-1); /* we support just vec 0 */
nlm_calc_poe_distvec(xlp_msg_thread_mask, 0, 0, 0,
0x1 << XLPGE_RX_VC, distvec);
return (0);
}
/*
* All our knowledge of chip and board that cannot be detected by probing
* at run-time goes here
*/
void
xlpge_get_macaddr(uint8_t *macaddr)
{
if (board_eeprom_set == 0) {
/* No luck, take some reasonable value */
macaddr[0] = 0x00; macaddr[1] = 0x0f; macaddr[2] = 0x30;
macaddr[3] = 0x20; macaddr[4] = 0x0d; macaddr[5] = 0x5b;
} else
memcpy(macaddr, &board_eeprom_buf[EEPROM_MACADDR_OFFSET],
ETHER_ADDR_LEN);
}
static void
nlm_setup_port_defaults(struct xlp_port_ivars *p)
{
p->loopback_mode = 0;
p->num_channels = 1;
p->free_desc_sizes = 2048;
p->vlan_pri_en = 0;
p->hw_parser_en = 1;
p->ieee1588_userval = 0;
p->ieee1588_ptpoff = 0;
p->ieee1588_tmr1 = 0;
p->ieee1588_tmr2 = 0;
p->ieee1588_tmr3 = 0;
p->ieee1588_inc_intg = 0;
p->ieee1588_inc_den = 1;
p->ieee1588_inc_num = 1;
if (nlm_is_xlp3xx()) {
p->stg2_fifo_size = XLP3XX_STG2_FIFO_SZ;
p->eh_fifo_size = XLP3XX_EH_FIFO_SZ;
p->frout_fifo_size = XLP3XX_FROUT_FIFO_SZ;
p->ms_fifo_size = XLP3XX_MS_FIFO_SZ;
p->pkt_fifo_size = XLP3XX_PKT_FIFO_SZ;
p->pktlen_fifo_size = XLP3XX_PKTLEN_FIFO_SZ;
p->max_stg2_offset = XLP3XX_MAX_STG2_OFFSET;
p->max_eh_offset = XLP3XX_MAX_EH_OFFSET;
p->max_frout_offset = XLP3XX_MAX_FREE_OUT_OFFSET;
p->max_ms_offset = XLP3XX_MAX_MS_OFFSET;
p->max_pmem_offset = XLP3XX_MAX_PMEM_OFFSET;
p->stg1_2_credit = XLP3XX_STG1_2_CREDIT;
p->stg2_eh_credit = XLP3XX_STG2_EH_CREDIT;
p->stg2_frout_credit = XLP3XX_STG2_FROUT_CREDIT;
p->stg2_ms_credit = XLP3XX_STG2_MS_CREDIT;
} else {
p->stg2_fifo_size = XLP8XX_STG2_FIFO_SZ;
p->eh_fifo_size = XLP8XX_EH_FIFO_SZ;
p->frout_fifo_size = XLP8XX_FROUT_FIFO_SZ;
p->ms_fifo_size = XLP8XX_MS_FIFO_SZ;
p->pkt_fifo_size = XLP8XX_PKT_FIFO_SZ;
p->pktlen_fifo_size = XLP8XX_PKTLEN_FIFO_SZ;
p->max_stg2_offset = XLP8XX_MAX_STG2_OFFSET;
p->max_eh_offset = XLP8XX_MAX_EH_OFFSET;
p->max_frout_offset = XLP8XX_MAX_FREE_OUT_OFFSET;
p->max_ms_offset = XLP8XX_MAX_MS_OFFSET;
p->max_pmem_offset = XLP8XX_MAX_PMEM_OFFSET;
p->stg1_2_credit = XLP8XX_STG1_2_CREDIT;
p->stg2_eh_credit = XLP8XX_STG2_EH_CREDIT;
p->stg2_frout_credit = XLP8XX_STG2_FROUT_CREDIT;
p->stg2_ms_credit = XLP8XX_STG2_MS_CREDIT;
}
switch (p->type) {
case SGMIIC:
p->num_free_descs = 52;
p->iface_fifo_size = 13;
p->rxbuf_size = 128;
p->rx_slots_reqd = SGMII_CAL_SLOTS;
p->tx_slots_reqd = SGMII_CAL_SLOTS;
if (nlm_is_xlp3xx())
p->pseq_fifo_size = 30;
else
p->pseq_fifo_size = 62;
break;
case ILC:
p->num_free_descs = 150;
p->rxbuf_size = 944;
p->rx_slots_reqd = IL8_CAL_SLOTS;
p->tx_slots_reqd = IL8_CAL_SLOTS;
p->pseq_fifo_size = 225;
p->iface_fifo_size = 55;
break;
case XAUIC:
default:
p->num_free_descs = 150;
p->rxbuf_size = 944;
p->rx_slots_reqd = XAUI_CAL_SLOTS;
p->tx_slots_reqd = XAUI_CAL_SLOTS;
if (nlm_is_xlp3xx()) {
p->pseq_fifo_size = 120;
p->iface_fifo_size = 52;
} else {
p->pseq_fifo_size = 225;
p->iface_fifo_size = 55;
}
break;
}
}
/* XLP 8XX evaluation boards have the following phy-addr
* assignment. There are two external mdio buses in XLP --
* bus 0 and bus 1. The management ports (16 and 17) are
* on mdio bus 0 while blocks/complexes[0 to 3] are all
* on mdio bus 1. The phy_addr on bus 0 (mgmt ports 16
* and 17) match the port numbers.
* These are the details:
* block port phy_addr mdio_bus
* ====================================
* 0 0 4 1
* 0 1 7 1
* 0 2 6 1
* 0 3 5 1
* 1 0 8 1
* 1 1 11 1
* 1 2 10 1
* 1 3 9 1
* 2 0 0 1
* 2 1 3 1
* 2 2 2 1
* 2 3 1 1
* 3 0 12 1
* 3 1 15 1
* 3 2 14 1
* 3 3 13 1
*
* 4 0 16 0
* 4 1 17 0
*
* The XLP 3XX evaluation boards have the following phy-addr
* assignments.
* block port phy_addr mdio_bus
* ====================================
* 0 0 4 0
* 0 1 7 0
* 0 2 6 0
* 0 3 5 0
* 1 0 8 0
* 1 1 11 0
* 1 2 10 0
* 1 3 9 0
*/
static void
nlm_board_get_phyaddr(int block, int port, int *phyaddr)
{
switch (block) {
case 0: switch (port) {
case 0: *phyaddr = 4; break;
case 1: *phyaddr = 7; break;
case 2: *phyaddr = 6; break;
case 3: *phyaddr = 5; break;
}
break;
case 1: switch (port) {
case 0: *phyaddr = 8; break;
case 1: *phyaddr = 11; break;
case 2: *phyaddr = 10; break;
case 3: *phyaddr = 9; break;
}
break;
case 2: switch (port) {
case 0: *phyaddr = 0; break;
case 1: *phyaddr = 3; break;
case 2: *phyaddr = 2; break;
case 3: *phyaddr = 1; break;
}
break;
case 3: switch (port) {
case 0: *phyaddr = 12; break;
case 1: *phyaddr = 15; break;
case 2: *phyaddr = 14; break;
case 3: *phyaddr = 13; break;
}
break;
case 4: switch (port) { /* management SGMII */
case 0: *phyaddr = 16; break;
case 1: *phyaddr = 17; break;
}
break;
}
}
static void
nlm_print_processor_info(void)
{
uint32_t procid;
int prid, rev;
char *chip, *revstr;
procid = mips_rd_prid();
prid = (procid >> 8) & 0xff;
rev = procid & 0xff;
switch (prid) {
case CHIP_PROCESSOR_ID_XLP_8XX:
chip = "XLP 832";
break;
case CHIP_PROCESSOR_ID_XLP_3XX:
chip = "XLP 3xx";
break;
case CHIP_PROCESSOR_ID_XLP_432:
case CHIP_PROCESSOR_ID_XLP_416:
chip = "XLP 4xx";
break;
default:
chip = "XLP ?xx";
break;
}
switch (rev) {
case 0:
revstr = "A0"; break;
case 1:
revstr = "A1"; break;
case 2:
revstr = "A2"; break;
case 3:
revstr = "B0"; break;
case 4:
revstr = "B1"; break;
default:
revstr = "??"; break;
}
printf("Processor info:\n");
printf(" Netlogic %s %s [%x]\n", chip, revstr, procid);
}
/*
* All our knowledge of chip and board that cannot be detected by probing
* at run-time goes here
*/
static int
nlm_setup_xlp_board(int node)
{
struct xlp_board_info *boardp;
struct xlp_node_info *nodep;
struct xlp_nae_ivars *naep;
struct xlp_block_ivars *blockp;
struct xlp_port_ivars *portp;
uint64_t cpldbase, nae_pcibase;
int block, port, rv, dbtype, usecpld = 0, evp = 0, svp = 0;
uint8_t *b;
/* start with a clean slate */
boardp = &xlp_board_info;
if (boardp->nodemask == 0)
memset(boardp, 0, sizeof(xlp_board_info));
boardp->nodemask |= (1 << node);
nlm_print_processor_info();
b = board_eeprom_buf;
rv = nlm_board_eeprom_read(node, EEPROM_I2CBUS, EEPROM_I2CADDR, 0, b,
EEPROM_SIZE);
if (rv == 0) {
board_eeprom_set = 1;
printf("Board info (EEPROM on i2c@%d at %#X):\n",
EEPROM_I2CBUS, EEPROM_I2CADDR);
printf(" Model: %7.7s %2.2s\n", &b[16], &b[24]);
printf(" Serial #: %3.3s-%2.2s\n", &b[27], &b[31]);
printf(" MAC addr: %02x:%02x:%02x:%02x:%02x:%02x\n",
b[2], b[3], b[4], b[5], b[6], b[7]);
} else
printf("Board Info: Error on EEPROM read (i2c@%d %#X).\n",
EEPROM_I2CBUS, EEPROM_I2CADDR);
nae_pcibase = nlm_get_nae_pcibase(node);
nodep = &boardp->nodes[node];
naep = &nodep->nae_ivars;
naep->node = node;
/* frequency at which network block runs */
naep->freq = 500;
/* CRC16 polynomial used for flow table generation */
naep->flow_crc_poly = 0xffff;
naep->hw_parser_en = 1;
naep->prepad_en = 1;
naep->prepad_size = 3; /* size in 16 byte units */
naep->ieee_1588_en = 1;
naep->ilmask = 0x0; /* set this based on daughter card */
naep->xauimask = 0x0; /* set this based on daughter card */
naep->sgmiimask = 0x0; /* set this based on daughter card */
naep->nblocks = nae_num_complex(nae_pcibase);
if (strncmp(&b[16], "PCIE", 4) == 0) {
usecpld = 0; /* XLP PCIe card */
/* Broadcom's XLP PCIe card has the following
* blocks fixed.
* blk 0-XAUI, 1-XAUI, 4-SGMII(one port) */
naep->blockmask = 0x13;
} else if (strncmp(&b[16], "MB-EVP", 6) == 0) {
usecpld = 1; /* XLP non-PCIe card which has CPLD */
evp = 1;
naep->blockmask = (1 << naep->nblocks) - 1;
} else if ((strncmp(&b[16], "MB-S", 4) == 0) ||
(strncmp(&b[16], "MB_S", 4) == 0)) {
usecpld = 1; /* XLP non-PCIe card which has CPLD */
svp = 1;
/* 3xx chip reports one block extra which is a bug */
naep->nblocks = naep->nblocks - 1;
naep->blockmask = (1 << naep->nblocks) - 1;
} else {
printf("ERROR!!! Board type:%7s didn't match any board"
" type we support\n", &b[16]);
return (-1);
}
cpldbase = nlm_board_cpld_base(node, XLP_EVB_CPLD_CHIPSELECT);
/* pretty print network config */
printf("Network config");
if (usecpld)
printf("(from CPLD@%d):\n", XLP_EVB_CPLD_CHIPSELECT);
else
printf("(defaults):\n");
printf(" NAE@%d Blocks: ", node);
for (block = 0; block < naep->nblocks; block++) {
char *s = "???";
if ((naep->blockmask & (1 << block)) == 0)
continue;
blockp = &naep->block_ivars[block];
blockp->block = block;
if (usecpld)
dbtype = nlm_board_cpld_dboard_type(cpldbase, block);
else
dbtype = DCARD_XAUI; /* default XAUI */
/* XLP PCIe cards */
if ((!evp && !svp) && ((block == 2) || (block == 3)))
dbtype = DCARD_NOT_PRSNT;
if (block == 4) {
/* management block 4 on 8xx or XLP PCIe */
blockp->type = SGMIIC;
if (evp)
blockp->portmask = 0x3;
else
blockp->portmask = 0x1;
naep->sgmiimask |= (1 << block);
} else {
switch (dbtype) {
case DCARD_ILAKEN:
blockp->type = ILC;
blockp->portmask = 0x1;
naep->ilmask |= (1 << block);
break;
case DCARD_SGMII:
blockp->type = SGMIIC;
blockp->portmask = 0xf;
naep->sgmiimask |= (1 << block);
break;
case DCARD_XAUI:
blockp->type = XAUIC;
blockp->portmask = 0x1;
naep->xauimask |= (1 << block);
break;
default: /* DCARD_NOT_PRSNT */
blockp->type = UNKNOWN;
blockp->portmask = 0;
break;
}
}
if (blockp->type != UNKNOWN) {
for (port = 0; port < PORTS_PER_CMPLX; port++) {
if ((blockp->portmask & (1 << port)) == 0)
continue;
portp = &blockp->port_ivars[port];
nlm_board_get_phyaddr(block, port,
&portp->phy_addr);
if (svp || (block == 4))
portp->mdio_bus = 0;
else
portp->mdio_bus = 1;
portp->port = port;
portp->block = block;
portp->node = node;
portp->type = blockp->type;
nlm_setup_port_defaults(portp);
}
}
switch (blockp->type) {
case SGMIIC : s = "SGMII"; break;
case XAUIC : s = "XAUI"; break;
case ILC : s = "IL"; break;
}
printf(" [%d %s]", block, s);
}
printf("\n");
return (0);
}
int nlm_board_info_setup(void)
{
if (nlm_setup_xlp_board(0) != 0)
return (-1);
return (0);
}
