# $FreeBSD$
#
# Simple psim h/w description
#
# The .gdbinit should contain something like:
#
# target sim -e chirp -r 33554432 -f psim-tree
# load
#
# (The -r option is the amount of physical RAM the simulator has)
#
/#address-cells 1
/openprom/options/use-stdio? false
#/openprom/options/strict-alignment? true
/options
./output-device "psim-stdout
#
# Define the disk device alias so ofwd can identify it
#
/aliases
./ofwdisk "/phb@0x70000000/ide@1/disk@0
#
# CPU definition. The phandle property is to help nexus.c locate the
# interrupt controller.
#
/cpus/cpu@0
#
# disk file, done via phb. maybe there's a simpler way.
#
/phb@0x70000000
./device_type "pci
./name "pci
./#address-cells 3
./#size-cells 2
./ranges ni0,0,0,0 0xc0000000 0x10000
/phb@0x70000000/ide@1
./device_type "ide
./name "ide
./assigned-addresses \
ni0,0,10,1f0 8 \
ni0,0,14,3f8 8 \
ni0,0,18,170 8 \
ni0,0,1c,378 8 \
ni0,0,20,200 8
./reg \
1 0 \
i0,0,10,0 8 \
i0,0,18,0 8 \
i0,0,14,6 1 \
i0,0,1c,6 1 \
i0,0,20,0 8
./ready-delay 1000
/phb@0x70000000/ide@1/disk@0/file "../image.iso
#
# I/O Bus
#
/iobus@0x90000000
./name psim-iobus
./reg 0x90000000 0x20000000
#
# OpenPIC
#
/iobus@0x90000000/opic@0x90000000
./name interrupt-controller
./device_type open-pic
./compatible psim,open-pic
./reg 0x90000000 0x40000
./interrupt-ranges 0 256
/iobus/opic > intr0 int /cpus/cpu@0x0
#
# IDE1
#
#/iobus@0x90000000/ide@0x90052000
# ./name ata-4
# ./ioport 1
# ./device_type ata
# ./interrupt 12
# ./reg 0x90052000 8 0x90052010 8 0x90052020 8 0x90052030 1 0x90052040 1 0x90052050 8
#/iobus@0x90000000/ide@0x90052000 > a irq12 /iobus/opic
