Remove the description of the link0 link option, since r215297 the master

media option generally should be used instead. Actually I think the lists
of media types should be removed from the manual pages of MAC drivers
altogether and users just pointed to the output of `ifconfig -m` instead;
even before r215297 there were several outdated descriptions, technically
it's wrong most of the time as not the MAC drivers support these media
types but actually the PHY drivers do and it generally doesn't make sense
to maintain these lists in every manual page of a driver as the media is
auto-detected.

6 files changed, 6 insertions, 132 deletions

diff --git a/share/man/man4/bge.4 b/share/man/man4/bge.4
index 086045f1d2b7..cf0d84a89a09 100644
--- a/share/man/man4/bge.4
+++ b/share/man/man4/bge.4
@@ -31,7 +31,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd November 7, 2010
+.Dd November 23, 2010
 .Dt BGE 4
 .Os
 .Sh NAME
@@ -144,27 +144,6 @@ Force full duplex operation.
 Force half duplex operation.
 .El
 .Pp
-The
-.Nm
-driver also supports one special link option for 1000baseTX cards:
-.Bl -tag -width ".Cm link0"
-.It Cm link0
-With 1000baseTX cards, establishing a link between two ports requires
-that one port be configured as a master and the other a slave.
-With autonegotiation,
-the master/slave settings will be chosen automatically.
-However when manually selecting the link state, it is necessary to
-force one side of the link to be a master and the other a slave.
-The
-.Nm
-driver configures the ports as slaves by default.
-Setting the
-.Cm link0
-flag with
-.Xr ifconfig 8
-will set a port as a master instead.
-.El
-.Pp
 For more information on configuring this device, see
 .Xr ifconfig 8 .
 .Sh HARDWARE
diff --git a/share/man/man4/msk.4 b/share/man/man4/msk.4
index 7ea12ddc818a..fe32a68a4226 100644
--- a/share/man/man4/msk.4
+++ b/share/man/man4/msk.4
@@ -24,7 +24,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd April 30, 2010
+.Dd November 23, 2010
 .Dt MSK 4
 .Os
 .Sh NAME
@@ -125,27 +125,6 @@ Force full duplex operation.
 Force half duplex operation.
 .El
 .Pp
-The
-.Nm
-driver also supports one special link option for 1000baseTX cards:
-.Bl -tag -width ".Cm link0"
-.It Cm link0
-With 1000baseTX cards, establishing a link between two ports requires
-that one port is configured as master and the other one as slave.
-With autonegotiation,
-the master/slave settings will be chosen automatically.
-However when manually selecting the link state, it is necessary to
-force one side of the link to be a master and the other a slave.
-The
-.Nm
-driver configures the ports as slaves by default.
-Setting the
-.Cm link0
-flag with
-.Xr ifconfig 8
-will set a port as a master instead.
-.El
-.Pp
 For more information on configuring this device, see
 .Xr ifconfig 8 .
 .Sh HARDWARE
diff --git a/share/man/man4/nge.4 b/share/man/man4/nge.4
index 7c692474115d..ec02052601c9 100644
--- a/share/man/man4/nge.4
+++ b/share/man/man4/nge.4
@@ -31,7 +31,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd May 21, 2009
+.Dd November 23, 2010
 .Dt NGE 4
 .Os
 .Sh NAME
@@ -131,27 +131,6 @@ Force full duplex operation.
 Force half duplex operation.
 .El
 .Pp
-The
-.Nm
-driver also supports one special link option for 1000baseTX cards:
-.Bl -tag -width link0
-.It Cm link0
-With 1000baseTX cards, establishing a link between two ports requires
-that one port be configured as a master and the other a slave.
-With autonegotiation,
-the master/slave settings will be chosen automatically.
-However when manually selecting the link state, it is necessary to
-force one side of the link to be a master and the other a slave.
-The
-.Nm
-driver configures the ports as slaves by default.
-Setting the
-.Cm link0
-flag with
-.Xr ifconfig 8
-will set a port as a master instead.
-.El
-.Pp
 For more information on configuring this device, see
 .Xr ifconfig 8 .
 .Sh HARDWARE
diff --git a/share/man/man4/sk.4 b/share/man/man4/sk.4
index 88a428609521..71e30c90a405 100644
--- a/share/man/man4/sk.4
+++ b/share/man/man4/sk.4
@@ -30,7 +30,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd January 23, 2009
+.Dd November 23, 2010
 .Dt SK 4
 .Os
 .Sh NAME
@@ -132,27 +132,6 @@ Force full duplex operation
 Force half duplex operation.
 .El
 .Pp
-The
-.Nm
-driver also supports one special link option for 1000baseTX cards:
-.Bl -tag -width xxxxxxxxxxxxxxxxxxxx
-.It link0
-With 1000baseTX cards, establishing a link between two ports requires
-that one port is configured as master and the other one as slave.
-With autonegotiation,
-the master/slave settings will be chosen automatically.
-However when manually selecting the link state, it is necessary to
-force one side of the link to be a master and the other a slave.
-The
-.Nm
-driver configures the ports as slaves by default.
-Setting the
-.Ar link0
-flag with
-.Xr ifconfig 8
-will set a port as a master instead.
-.El
-.Pp
 For more information on configuring this device, see
 .Xr ifconfig 8 .
 .Sh HARDWARE
diff --git a/share/man/man4/stge.4 b/share/man/man4/stge.4
index d9c75ef4ee77..bfcaab0533c2 100644
--- a/share/man/man4/stge.4
+++ b/share/man/man4/stge.4
@@ -29,7 +29,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd July 25, 2006
+.Dd November 23, 2010
 .Dt STGE 4
 .Os
 .Sh NAME
@@ -129,27 +129,6 @@ Force full duplex operation.
 Force half duplex operation.
 .El
 .Pp
-The
-.Nm
-driver also supports one special link option for 1000baseTX cards:
-.Bl -tag -width ".Cm link0"
-.It Cm link0
-With 1000baseTX cards, establishing a link between two ports requires
-that one port is configured as master and the other one as slave.
-With autonegotiation,
-the master/slave settings will be chosen automatically.
-However when manually selecting the link state, it is necessary to
-force one side of the link to be a master and the other a slave.
-The
-.Nm
-driver configures the ports as slaves by default.
-Setting the
-.Cm link0
-flag with
-.Xr ifconfig 8
-will set a port as a master instead.
-.El
-.Pp
 For more information on configuring this device, see
 .Xr ifconfig 8 .
 .Sh HARDWARE
diff --git a/share/man/man4/vge.4 b/share/man/man4/vge.4
index f6ce47c85b99..ae0206a62e89 100644
--- a/share/man/man4/vge.4
+++ b/share/man/man4/vge.4
@@ -30,7 +30,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd December 18, 2009
+.Dd November 23, 2010
 .Dt VGE 4
 .Os
 .Sh NAME
@@ -137,27 +137,6 @@ Force full duplex operation.
 Force half duplex operation.
 .El
 .Pp
-The
-.Nm
-driver also supports one special link option for 1000baseTX cards:
-.Bl -tag -width ".Cm link0"
-.It Cm link0
-With 1000baseTX cards, establishing a link between two ports requires
-that one port be configured as a master and the other a slave.
-With autonegotiation,
-the master/slave settings will be chosen automatically.
-However when manually selecting the link state, it is necessary to
-force one side of the link to be a master and the other a slave.
-The
-.Nm
-driver configures the ports as slaves by default.
-Setting the
-.Cm link0
-flag with
-.Xr ifconfig 8
-will set a port as a master instead.
-.El
-.Pp
 For more information on configuring this device, see
 .Xr ifconfig 8 .
 .Sh HARDWARE