Add support for NE2000 compatible PCI Ethernet cards. The PCI probe

is enabled by having an "device ed0 at isa? [...]" config line.
The first PCI card will get a unit number one higher than the highest
defined for any ISA card of the ED type, e.g. if ed0 and ed1 are
configured, then the PCI cards will be ed2, ed3, ...

BEWARE: If you have configured your kernel as ed0 with the port address
as assigned by the PCI BIOS, then your card will be found by both the
PCI and ISA probes, and bad things may happen. Make sure to restore
the original port address form the GENERIC kernel for the ed0 device!

Reviewed by:	davidg

1 files changed, 90 insertions, 25 deletions

diff --git a/sys/dev/ed/if_ed.c b/sys/dev/ed/if_ed.c
index e1784a2776ba..bde3444c848a 100644
--- a/sys/dev/ed/if_ed.c
+++ b/sys/dev/ed/if_ed.c
@@ -24,7 +24,7 @@
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  *
- *	$Id: if_ed.c,v 1.96 1996/04/08 01:25:22 davidg Exp $
+ *	$Id: if_ed.c,v 1.97 1996/04/23 18:36:54 nate Exp $
  */
 
 /*
@@ -130,7 +130,9 @@ struct ed_softc {
 
 static struct ed_softc ed_softc[NED];
 
-static int ed_attach		__P((struct isa_device *));
+static int ed_attach		__P((struct ed_softc *, int, int));
+static int ed_attach_isa	__P((struct isa_device *));
+
 static void ed_init		__P((struct ifnet *));
 static int ed_ioctl		__P((struct ifnet *, int, caddr_t));
 static int ed_probe		__P((struct isa_device *));
@@ -143,7 +145,17 @@ static int ed_probe_generic8390	__P((struct ed_softc *));
 static int ed_probe_WD80x3	__P((struct isa_device *));
 static int ed_probe_3Com	__P((struct isa_device *));
 static int ed_probe_Novell	__P((struct isa_device *));
+static int ed_probe_Novell_generic __P((struct ed_softc *, int, int, int));
+
+#include "pci.h"
+#if NPCI > 0
+void *ed_attach_NE2000_pci	__P((int, int));
+#endif
+
+#include "crd.h"
+#if NCRD > 0
 static int ed_probe_pccard	__P((struct isa_device *, u_char *));
+#endif
 
 static void    ds_getmcaf __P((struct ed_softc *, u_long *));
 
@@ -164,7 +176,6 @@ static u_short	ed_pio_write_mbufs __P((struct ed_softc *, struct mbuf *,
 static void    ed_setrcr(struct ed_softc *);
 static u_long ds_crc(u_char *ep);
 
-#include "crd.h"
 #if NCRD > 0
 #include <sys/select.h>
 #include <pccard/card.h>
@@ -225,7 +236,7 @@ edinit(struct pccard_dev *dp, int first)
 		sc->gone = 0;
 		if (ed_probe_pccard(&dp->isahd,dp->misc)==0)
 			return(ENXIO);
-		if (ed_attach(&dp->isahd)==0)
+		if (ed_attach_isa(&dp->isahd)==0)
 			return(ENXIO);
 	}
 	/*
@@ -271,14 +282,14 @@ edunload(struct pccard_dev *dp)
 static int
 card_intr(struct pccard_dev *dp)
 {
-	edintr(dp->isahd.id_unit);
+	edintr_sc(&ed_softc[dp->isahd.id_unit]);
 	return(1);
 }
 #endif /* NCRD > 0 */
 
 struct isa_driver eddriver = {
 	ed_probe,
-	ed_attach,
+	ed_attach_isa,
 	"ed",
 	1		/* We are ultra sensitive */
 };
@@ -1083,17 +1094,19 @@ ed_probe_3Com(isa_dev)
  * Probe and vendor-specific initialization routine for NE1000/2000 boards
  */
 static int
-ed_probe_Novell(isa_dev)
-	struct isa_device *isa_dev;
+ed_probe_Novell_generic(sc, port, unit, flags)
+	struct ed_softc *sc;
+	int port;
+	int unit;
+	int flags;
 {
-	struct ed_softc *sc = &ed_softc[isa_dev->id_unit];
 	u_int   memsize, n;
 	u_char  romdata[16], tmp;
 	static char test_pattern[32] = "THIS is A memory TEST pattern";
 	char    test_buffer[32];
 
-	sc->asic_addr = isa_dev->id_iobase + ED_NOVELL_ASIC_OFFSET;
-	sc->nic_addr = isa_dev->id_iobase + ED_NOVELL_NIC_OFFSET;
+	sc->asic_addr = port + ED_NOVELL_ASIC_OFFSET;
+	sc->nic_addr = port + ED_NOVELL_NIC_OFFSET;
 
 	/* XXX - do Novell-specific probe here */
 
@@ -1132,7 +1145,6 @@ ed_probe_Novell(isa_dev)
 	sc->vendor = ED_VENDOR_NOVELL;
 	sc->mem_shared = 0;
 	sc->cr_proto = ED_CR_RD2;
-	isa_dev->id_maddr = 0;
 
 	/*
 	 * Test the ability to read and write to the NIC memory. This has the
@@ -1235,7 +1247,7 @@ ed_probe_Novell(isa_dev)
 		}
 
 		if (mstart == 0) {
-			printf("ed%d: Cannot find start of RAM.\n", isa_dev->id_unit);
+			printf("ed%d: Cannot find start of RAM.\n", unit);
 			return 0;
 		}
 		/* Search for the start of RAM. */
@@ -1257,10 +1269,10 @@ ed_probe_Novell(isa_dev)
 		}
 
 		if (msize == 0) {
-			printf("ed%d: Cannot find any RAM, start : %d, x = %d.\n", isa_dev->id_unit, mstart, x);
+			printf("ed%d: Cannot find any RAM, start : %d, x = %d.\n", unit, mstart, x);
 			return 0;
 		}
-		printf("ed%d: RAM start at %d, size : %d.\n", isa_dev->id_unit, mstart, msize);
+		printf("ed%d: RAM start at %d, size : %d.\n", unit, mstart, msize);
 
 		sc->mem_size = msize;
 		sc->mem_start = (char *) mstart;
@@ -1273,7 +1285,7 @@ ed_probe_Novell(isa_dev)
 	 * Use one xmit buffer if < 16k, two buffers otherwise (if not told
 	 * otherwise).
 	 */
-	if ((memsize < 16384) || (isa_dev->id_flags & ED_FLAGS_NO_MULTI_BUFFERING))
+	if ((memsize < 16384) || (flags & ED_FLAGS_NO_MULTI_BUFFERING))
 		sc->txb_cnt = 1;
 	else
 		sc->txb_cnt = 2;
@@ -1300,6 +1312,18 @@ ed_probe_Novell(isa_dev)
 	return (ED_NOVELL_IO_PORTS);
 }
 
+static int
+ed_probe_Novell(isa_dev)
+	struct isa_device *isa_dev;
+{
+	struct ed_softc *sc = &ed_softc[isa_dev->id_unit];
+
+	isa_dev->id_maddr = 0;
+	return ed_probe_Novell_generic(sc, isa_dev->id_iobase, 
+				       isa_dev->id_unit, isa_dev->id_flags);
+}
+
+#if NCRD > 0
 
 /*
  * Probe and vendor-specific initialization routine for PCCARDs
@@ -1409,14 +1433,17 @@ ed_probe_pccard(isa_dev, ether)
 	return (ED_PC_IO_PORTS);
 }
 
+#endif /* NCRD > 0 */
+
 /*
  * Install interface into kernel networking data structures
  */
 static int
-ed_attach(isa_dev)
-	struct isa_device *isa_dev;
+ed_attach(sc, unit, flags)
+	struct ed_softc *sc;
+	int unit;
+	int flags;
 {
-	struct ed_softc *sc = &ed_softc[isa_dev->id_unit];
 	struct ifnet *ifp = &sc->arpcom.ac_if;
 
 	/*
@@ -1429,7 +1456,7 @@ ed_attach(isa_dev)
 		 * Initialize ifnet structure
 		 */
 		ifp->if_softc = sc;
-		ifp->if_unit = isa_dev->id_unit;
+		ifp->if_unit = unit;
 		ifp->if_name = "ed";
 		ifp->if_output = ether_output;
 		ifp->if_start = ed_start;
@@ -1442,7 +1469,7 @@ ed_attach(isa_dev)
 		 * tranceiver for AUI operation), based on compile-time 
 		 * config option.
 		 */
-		if (isa_dev->id_flags & ED_FLAGS_DISABLE_TRANCEIVER)
+		if (flags & ED_FLAGS_DISABLE_TRANCEIVER)
 			ifp->if_flags = (IFF_BROADCAST | IFF_SIMPLEX | 
 			    IFF_MULTICAST | IFF_ALTPHYS);
 		else
@@ -1461,7 +1488,7 @@ ed_attach(isa_dev)
 	/*
 	 * Print additional info when attached
 	 */
-	printf("ed%d: address %6D, ", isa_dev->id_unit, 
+	printf("%s%d: address %6D, ", ifp->if_name, ifp->if_unit, 
 		sc->arpcom.ac_enaddr, ":");
 
 	if (sc->type_str && (*sc->type_str != 0))
@@ -1483,6 +1510,38 @@ ed_attach(isa_dev)
 	return 1;
 }
 
+static int
+ed_attach_isa(isa_dev)
+	struct isa_device *isa_dev;
+{
+	int unit = isa_dev->id_unit;
+	struct ed_softc *sc = &ed_softc[unit];
+	int flags = isa_dev->id_flags;
+
+	return ed_attach(sc, unit, flags);
+}
+
+#if NPCI > 0
+void *
+ed_attach_NE2000_pci(unit, port)
+	int unit;
+	int port;
+{
+	struct ed_softc *sc = malloc(sizeof *sc, M_DEVBUF, M_NOWAIT);
+	int isa_flags = 0;
+
+	if (!sc)
+		return sc;
+
+	if (ed_probe_Novell_generic(sc, port, unit, isa_flags) == 0
+	    || ed_attach(sc, unit, isa_flags) == 0) {
+		free(sc, M_DEVBUF);
+		return NULL;
+	}
+	return sc;
+}
+#endif
+
 /*
  * Reset interface.
  */
@@ -2040,10 +2099,9 @@ ed_rint(sc)
  * Ethernet interface interrupt processor
  */
 void
-edintr(unit)
-	int     unit;
+edintr_sc(sc)
+	struct ed_softc *sc;
 {
-	struct ed_softc *sc = &ed_softc[unit];
 	struct ifnet *ifp = (struct ifnet *)sc;
 	u_char  isr;
 
@@ -2249,6 +2307,13 @@ edintr(unit)
 	}
 }
 
+void 
+edintr(unit)
+	int unit;
+{
+	edintr_sc (&ed_softc[unit]);
+}
+
 /*
  * Process an ioctl request. This code needs some work - it looks
  *	pretty ugly.