Document options HZ, place it in its own section `CLOCK OPTIONS' and

add the undocumented CLK_* options to that section as well.

Submitted by:	Mike Tancsa <mike@sentex.ca> (partially)

1 files changed, 20 insertions, 3 deletions

diff --git a/sys/i386/conf/NOTES b/sys/i386/conf/NOTES
index 13da3218c620..bb4a375ff398 100644
--- a/sys/i386/conf/NOTES
+++ b/sys/i386/conf/NOTES
@@ -701,6 +701,26 @@ options 	_KPOSIX_VERSION=199309L
 
 
 #####################################################################
+# CLOCK OPTIONS
+
+# The granularity of operation is controlled by the kernel option HZ whose
+# default value (100) means a granularity of 10ms.  For an accurate simulation
+# of high data rates it might be necessary to reduce the timer granularity to
+# 1ms or less.  Consider, however, that some interfaces using programmed I/O
+# may require a considerable time to output packets.  So, reducing the
+# granularity too much might actually cause ticks to be missed thus reducing
+# the accuracy of operation.
+
+options 	HZ=100
+
+# Other clock options
+
+options 	CLK_CALIBRATION_LOOP
+options 	CLK_USE_I8254_CALIBRATION
+options 	CLK_USE_TSC_CALIBRATION
+
+
+#####################################################################
 # SCSI DEVICES
 
 # SCSI DEVICE CONFIGURATION
@@ -2274,9 +2294,6 @@ options 	NPX_DEBUG	# enable npx debugging (FPU/math emu)
 options 	AHC_DUMP_EEPROM
 options 	AHC_TMODE_ENABLE
 options 	CAM_DEBUG_DELAY
-options 	CLK_CALIBRATION_LOOP
-options 	CLK_USE_I8254_CALIBRATION
-options 	CLK_USE_TSC_CALIBRATION
 options 	CLUSTERDEBUG
 options 	COMPAT_LINUX
 options 	CPU_UPGRADE_HW_CACHE