aboutsummaryrefslogtreecommitdiff
path: root/sys/net80211/ieee80211_radiotap.h
diff options
context:
space:
mode:
authorSam Leffler <sam@FreeBSD.org>2003-12-28 06:57:28 +0000
committerSam Leffler <sam@FreeBSD.org>2003-12-28 06:57:28 +0000
commitc6b688c403b6fe488d886b9ad2b4296b65aaaf97 (patch)
tree127a9200607a39162bffb9ee2e308b2fcf94334a /sys/net80211/ieee80211_radiotap.h
parent8eaddab161450bdf7b0a3dbdfddefbf4e7bd9341 (diff)
downloadsrc-c6b688c403b6fe488d886b9ad2b4296b65aaaf97.tar.gz
src-c6b688c403b6fe488d886b9ad2b4296b65aaaf97.zip
Sync with netbsd:
o #ifdef _KERNEL the fallback definition for DLT_IEEE802_11_RADIO o fix many comments o rename antenna stuff and fix units/reference signal o change IEEE80211_RADIOTAP_DBM_TX_POWER from unsigned 16-bit value to a signed 8-bit value o change IEEE80211_RADIOTAP_FLAGS from 16 bits to 8 bits to simplify padding requirements o drop IEEE80211_RADIOTAP_TIME o change IEEE80211_RADIOTAP_ANTENNA from 16 bits to 8 bits o drop IEEE80211_RADIOTAP_PAD o add channel flag definitions for outside the kernel so radiotap doesn't depend on stuff in ieee80211*.h Obtained from: NetBSD
Notes
Notes: svn path=/head/; revision=123926
Diffstat (limited to 'sys/net80211/ieee80211_radiotap.h')
-rw-r--r--sys/net80211/ieee80211_radiotap.h103
1 files changed, 60 insertions, 43 deletions
diff --git a/sys/net80211/ieee80211_radiotap.h b/sys/net80211/ieee80211_radiotap.h
index d263d5393880..22d1bfdfbcc6 100644
--- a/sys/net80211/ieee80211_radiotap.h
+++ b/sys/net80211/ieee80211_radiotap.h
@@ -1,5 +1,5 @@
/* $FreeBSD$ */
-/* $NetBSD: $ */
+/* $NetBSD: ieee80211_radiotap.h,v 1.3 2003/11/16 09:02:42 dyoung Exp $ */
/*-
* Copyright (c) 2003, 2004 David Young. All rights reserved.
@@ -46,22 +46,24 @@
* function of...") that I cannot set false expectations for lawyerly
* readers.
*/
+#ifdef _KERNEL
#ifndef DLT_IEEE802_11_RADIO
#define DLT_IEEE802_11_RADIO 127 /* 802.11 plus WLAN header */
#endif
+#endif /* _KERNEL */
/* The radio capture header precedes the 802.11 header. */
struct ieee80211_radiotap_header {
u_int8_t it_version; /* Version 0. Only increases
* for drastic changes,
* introduction of compatible
- * new LTVs does not count.
+ * new fields does not count.
*/
u_int8_t it_pad;
u_int16_t it_len; /* length of the whole
* header in bytes, including
* it_version, it_pad,
- * it_len, and LTVs.
+ * it_len, and data fields.
*/
u_int32_t it_present; /* A bitmap telling which
* fields are present. Set bit 31
@@ -70,33 +72,51 @@ struct ieee80211_radiotap_header {
* Additional extensions are made
* by setting bit 31.
*/
-};
+} __attribute__((__packed__));
/* Name Data type Units
* ---- --------- -----
*
- * IEEE80211_RADIOTAP_CHANNEL u_int8_t MHz
+ * IEEE80211_RADIOTAP_TSFT u_int64_t microseconds
+ *
+ * Value in microseconds of the MAC's 64-bit 802.11 Time
+ * Synchronization Function timer when the first bit of the
+ * MPDU arrived at the MAC. For received frames, only.
*
- * Tx/Rx channel number (for DSSS/OFDM/PBCC PHY)
+ * IEEE80211_RADIOTAP_CHANNEL 2 x u_int16_t MHz, bitmap
+ *
+ * Tx/Rx frequency in MHz, followed by flags (see below).
*
* IEEE80211_RADIOTAP_FHSS u_int16_t see below
*
* For frequency-hopping radios, the hop set (first byte)
* and pattern (second byte).
*
- * IEEE80211_RADIOTAP_RATE u_int8_t .5Mb/s
+ * IEEE80211_RADIOTAP_RATE u_int8_t 500kb/s
+ *
+ * Tx/Rx data rate
+ *
+ * IEEE80211_RADIOTAP_DBM_ANTSIGNAL int8_t decibels from
+ * one milliwatt (dBm)
+ *
+ * RF signal power at the antenna, decibel difference from
+ * one milliwatt.
+ *
+ * IEEE80211_RADIOTAP_DBM_ANTNOISE int8_t decibels from
+ * one milliwatt (dBm)
*
- * IEEE Tx/Rx data rate cookie (including basic rate flag)
+ * RF noise power at the antenna, decibel difference from one
+ * milliwatt.
*
- * IEEE80211_RADIOTAP_DB_ANTSIGNAL int16_t decibel (dB)
- *
- * RF signal power at the antenna, measured from a fixed,
- * arbitrary reference point.
+ * IEEE80211_RADIOTAP_DB_ANTSIGNAL u_int8_t decibel (dB)
*
- * IEEE80211_RADIOTAP_DB_ANTNOISE int16_t decibel (dB)
+ * RF signal power at the antenna, decibel difference from an
+ * arbitrary, fixed reference.
*
- * RF noise power at the antenna in decibels from an arbitrary,
- * fixed reference point.
+ * IEEE80211_RADIOTAP_DB_ANTNOISE u_int8_t decibel (dB)
+ *
+ * RF noise power at the antenna, decibel difference from an
+ * arbitrary, fixed reference point.
*
* IEEE80211_RADIOTAP_BARKER_CODE_LOCK u_int16_t unitless
*
@@ -117,68 +137,65 @@ struct ieee80211_radiotap_header {
* set at factory calibration. 0 is max power. Monotonically
* nondecreasing with lower power levels.
*
- * IEEE80211_RADIOTAP_DBM_TX_POWER u_int16_t decibels from
- * milliwatt (dBm)
+ * IEEE80211_RADIOTAP_DBM_TX_POWER int8_t decibels from
+ * one milliwatt (dBm)
*
* Transmit power expressed as dBm (decibels from a 1 milliwatt
* reference). This is the absolute power level measured at
* the antenna port.
*
- * IEEE80211_RADIOTAP_TSFT u_int64_t microseconds
- *
- * Value in microseconds of the MAC's 64-bit 802.11 Time
- * Synchronization Function timer when the first bit of the
- * MPDU arrived at the MAC. For received frames, only.
- * Little-endian byte order.
- *
- * IEEE80211_RADIOTAP_FLAGS u_int16_t bitmap
+ * IEEE80211_RADIOTAP_FLAGS u_int8_t bitmap
*
* Properties of transmitted and received frames. See flags
* defined below.
*
- * IEEE80211_RADIOTAP_TIME u_int32_t microseconds
- *
- * For radios that provide it: packet arrival time in
- * microseconds. Prism hardware will provide this, but it is
- * not known whether it marks the first or the last bit of
- * the frame. Nor is it known where that bit has arrived
- * (antenna, modem, MAC?) when the time is measured.
- *
- * IEEE80211_RADIOTAP_ANTENNA u_int16_t antenna index
+ * IEEE80211_RADIOTAP_ANTENNA u_int8_t antenna index
*
* Unitless indication of the Rx/Tx antenna for this packet.
* The first antenna is antenna 0.
*/
enum ieee80211_radiotap_type {
- IEEE80211_RADIOTAP_PAD = 0,
+ IEEE80211_RADIOTAP_TSFT = 0,
IEEE80211_RADIOTAP_FLAGS = 1,
IEEE80211_RADIOTAP_RATE = 2,
IEEE80211_RADIOTAP_CHANNEL = 3,
IEEE80211_RADIOTAP_FHSS = 4,
- IEEE80211_RADIOTAP_DB_ANTSIGNAL = 5,
- IEEE80211_RADIOTAP_DB_ANTNOISE = 6,
+ IEEE80211_RADIOTAP_DBM_ANTSIGNAL = 5,
+ IEEE80211_RADIOTAP_DBM_ANTNOISE = 6,
IEEE80211_RADIOTAP_LOCK_QUALITY = 7,
IEEE80211_RADIOTAP_TX_ATTENUATION = 8,
IEEE80211_RADIOTAP_DB_TX_ATTENUATION = 9,
IEEE80211_RADIOTAP_DBM_TX_POWER = 10,
IEEE80211_RADIOTAP_ANTENNA = 11,
- IEEE80211_RADIOTAP_TSFT = 12,
+ IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12,
+ IEEE80211_RADIOTAP_DB_ANTNOISE = 13,
IEEE80211_RADIOTAP_EXT = 31,
- IEEE80211_RADIOTAP_TIME = 32
};
+#ifndef _KERNEL
+/* Channel flags. */
+#define IEEE80211_CHAN_TURBO 0x0010 /* Turbo channel */
+#define IEEE80211_CHAN_CCK 0x0020 /* CCK channel */
+#define IEEE80211_CHAN_OFDM 0x0040 /* OFDM channel */
+#define IEEE80211_CHAN_2GHZ 0x0080 /* 2 GHz spectrum channel. */
+#define IEEE80211_CHAN_5GHZ 0x0100 /* 5 GHz spectrum channel */
+#define IEEE80211_CHAN_PASSIVE 0x0200 /* Only passive scan allowed */
+#define IEEE80211_CHAN_DYN 0x0400 /* Dynamic CCK-OFDM channel */
+#define IEEE80211_CHAN_GFSK 0x0800 /* GFSK channel (FHSS PHY) */
+#endif /* !_KERNEL */
+
/* For IEEE80211_RADIOTAP_FLAGS */
-#define IEEE80211_RADIOTAP_F_CFP 0x0001 /* sent/received
+#define IEEE80211_RADIOTAP_F_CFP 0x01 /* sent/received
* during CFP
*/
-#define IEEE80211_RADIOTAP_F_SHORTPRE 0x0002 /* sent/received
+#define IEEE80211_RADIOTAP_F_SHORTPRE 0x02 /* sent/received
* with short
* preamble
*/
-#define IEEE80211_RADIOTAP_F_WEP 0x0004 /* sent/received
+#define IEEE80211_RADIOTAP_F_WEP 0x04 /* sent/received
* with WEP encryption
*/
-#define IEEE80211_RADIOTAP_F_FRAG 0x0008 /* sent/received
+#define IEEE80211_RADIOTAP_F_FRAG 0x08 /* sent/received
* with fragmentation
*/