Move remote & phones to usr.bin/tip/tip/

Approved by:	re (blanket, pkgbase), will (mentor)
Differential Revision:	https://reviews.freebsd.org/D17219

3 files changed, 88 insertions, 0 deletions

diff --git a/usr.bin/tip/tip/Makefile b/usr.bin/tip/tip/Makefile
index a8ed43f7c579..f177ad15d3b8 100644
--- a/usr.bin/tip/tip/Makefile
+++ b/usr.bin/tip/tip/Makefile
@@ -31,6 +31,7 @@
 #				explicitly to remcap.c if not 1024
 #	CONNECT			enable ~C command (connect pgm to remote)
 
+CONFS=	phones remote
 PROG=	tip
 LINKS=	${BINDIR}/tip ${BINDIR}/cu
 MAN=	tip.1 cu.1
@@ -47,6 +48,9 @@ SRCS=	acu.c acutab.c cmds.c cmdtab.c cu.c hunt.c log.c partab.c \
 # -- log.o depends on the Makefile because of ACULOG
 acutab.o log.o remote.o: Makefile
 
+# Don't rebuild based on remote.c
+remote: .MADE
+
 .include <bsd.prog.mk>
 
 # Dirty, rotten hack. This can be removed when we are confident that there
diff --git a/usr.bin/tip/tip/phones b/usr.bin/tip/tip/phones
new file mode 100644
index 000000000000..fbeddf613cbb
--- /dev/null
+++ b/usr.bin/tip/tip/phones
@@ -0,0 +1,8 @@
+# $FreeBSD$
+#	From: @(#)phones	5.2 (Berkeley) 6/30/90
+#
+# phones -- remote host phone number data base
+# see tip(1), phones(5)
+# examples:
+#system1	9=2225551212
+#system2	  9995551212
diff --git a/usr.bin/tip/tip/remote b/usr.bin/tip/tip/remote
new file mode 100644
index 000000000000..c3e7808952d8
--- /dev/null
+++ b/usr.bin/tip/tip/remote
@@ -0,0 +1,76 @@
+# $FreeBSD$
+#
+#	@(#)remote	5.2 (Berkeley) 6/30/90
+#
+# remote -- remote host description file
+# see tip(1), remote(5)
+#
+# at	ACU type
+# br	bit rate (defaults to 9600)
+# cu	call unit (default is dv)
+# du	make a call flag (dial up)
+# dv	device to use for the tty
+# el	EOL marks (default is NULL)
+# fs	frame size (default is BUFSIZ) -- used in buffering writes on
+#	receive operations
+# ie	input EOF marks (default is NULL)
+# oe	output EOF string (default is NULL)
+# pa	The parity type to use: even, odd, none, zero, one (default even)
+# pn	phone numbers (@ =>'s search phones file; possibly taken from
+#	PHONES environment variable)
+# tc	to continue a capability
+
+# Example systems
+unixshell|Unix Access:\
+	:pn=\@:tc=unix57600:
+dosbbs|DOS-based BBS:\
+	:pn=\@:tc=dos57600:
+
+# UNIX system definitions
+unix57600|57600 Baud dial-out to a UNIX system:\
+	:el=^U^C^R^O^D^S^Q:ie=%$:oe=^D:tc=dial57600:
+unix33600|33600 Baud dial-out to a UNIX system:\
+	:el=^U^C^R^O^D^S^Q:ie=%$:oe=^D:tc=dial33600:
+
+# DOS system definitions
+dos57600|57600 Baud dial-out to a DOS system:\
+	:el=^U^C^R^O^D^S^Q:ie=%$:oe=^Z:pa=none:tc=dial57600:
+
+# 33.6k and 56k modems run the com port at 115200 bps to allow for the
+# compression performed in the modem.  Note that some serial hardware
+# does not support speeds above 38400 bps and that speeds above that have
+# never been formally standardized.  Modern architectures with 16550 or
+# better UARTs typically have no issues with the higher speeds.
+dial57600|57600 Baud Hayes attributes:\
+	br#115200:tc=dial:
+dial33600|33600 Baud Hayes attributes:\
+	br#115200:tc=dial:
+# 14.4k and 28.8k modems ran the port at 4x.  Some rare 19.2 baud modems
+# did too, but those aren't included in this example.
+dial28800|28800 Baud Hayes attributes:\
+	br#115200:tc=dial:
+dial14400|14400 Baud Hayes attributes:\
+	br#57600:tc=dial:
+dial|Generic dialing parameters:\
+	:dv=/dev/cuau0:cu=/dev/cuau0:at=hayes:du:pa=none:
+
+# Hardwired line
+cuau0c|cua0c:dv=/dev/cuau0:br#9600:pa=none:
+
+# Finger friendly shortcuts
+uart0|com1:dv=/dev/cuau0:br#9600:pa=none:
+uart1|com2:dv=/dev/cuau1:br#9600:pa=none:
+uart2|com3:dv=/dev/cuau2:br#9600:pa=none:
+uart3|com4:dv=/dev/cuau3:br#9600:pa=none:
+uart4|com5:dv=/dev/cuau4:br#9600:pa=none:
+uart5|com6:dv=/dev/cuau5:br#9600:pa=none:
+uart6|com7:dv=/dev/cuau6:br#9600:pa=none:
+uart7|com8:dv=/dev/cuau7:br#9600:pa=none:
+ucom1:dv=/dev/cuaU0:br#9600:pa=none:
+ucom2:dv=/dev/cuaU1:br#9600:pa=none:
+ucom3:dv=/dev/cuaU2:br#9600:pa=none:
+ucom4:dv=/dev/cuaU3:br#9600:pa=none:
+ucom5:dv=/dev/cuaU4:br#9600:pa=none:
+ucom6:dv=/dev/cuaU5:br#9600:pa=none:
+ucom7:dv=/dev/cuaU6:br#9600:pa=none:
+ucom8:dv=/dev/cuaU7:br#9600:pa=none: