aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--sbin/ifconfig/ifconfig.84
-rw-r--r--sbin/ipfw/ipfw.82
-rw-r--r--share/man/man4/ath.44
-rw-r--r--share/man/man4/net80211.42
-rw-r--r--sys/conf/NOTES4
-rw-r--r--sys/dev/ath/if_ath_sysctl.c2
-rw-r--r--sys/dev/siba/siba_core.c2
-rw-r--r--sys/ia64/ia64/machdep.c2
-rw-r--r--sys/mips/rt305x/rt305x_sysctl.c6
9 files changed, 14 insertions, 14 deletions
diff --git a/sbin/ifconfig/ifconfig.8 b/sbin/ifconfig/ifconfig.8
index e9c699567d94..fe45f32bbdb3 100644
--- a/sbin/ifconfig/ifconfig.8
+++ b/sbin/ifconfig/ifconfig.8
@@ -1036,7 +1036,7 @@ Enable Dynamic Frequency Selection (DFS) as specified in 802.11h.
DFS embodies several facilities including detection of overlapping
radar signals, dynamic transmit power control, and channel selection
according to a least-congested criteria.
-DFS support is mandatory for some 5Ghz frequencies in certain
+DFS support is mandatory for some 5GHz frequencies in certain
locales (e.g. ETSI).
By default DFS is enabled according to the regulatory definitions
specified in /etc/regdomain.xml and the current country code, regdomain,
@@ -1091,7 +1091,7 @@ By default DTIM is 1 (i.e., DTIM occurs at each beacon).
.It Cm quiet
Enable the use of quiet IE. Hostap will use this to silent other
stations to reduce interference for radar detection when
-operating on 5Ghz frequency and doth support is enabled.
+operating on 5GHz frequency and doth support is enabled.
Use
.Fl quiet
to disable this functionality.
diff --git a/sbin/ipfw/ipfw.8 b/sbin/ipfw/ipfw.8
index 370d104f5ff7..6293d73f9d13 100644
--- a/sbin/ipfw/ipfw.8
+++ b/sbin/ipfw/ipfw.8
@@ -2235,7 +2235,7 @@ specifies the scheduling algorithm to use.
is just a FIFO scheduler (which means that all packets
are stored in the same queue as they arrive to the scheduler).
FIFO has O(1) per-packet time complexity, with very low
-constants (estimate 60-80ns on a 2Ghz desktop machine)
+constants (estimate 60-80ns on a 2GHz desktop machine)
but gives no service guarantees.
.It Cm wf2qp
implements the WF2Q+ algorithm, which is a Weighted Fair Queueing
diff --git a/share/man/man4/ath.4 b/share/man/man4/ath.4
index b36bc9051951..33250ac73380 100644
--- a/share/man/man4/ath.4
+++ b/share/man/man4/ath.4
@@ -95,8 +95,8 @@ with transmit speeds appropriate to each.
AR5416-class devices are capable of 802.11n operation
but are supported only in legacy modes (802.11a, 11b, 11g).
Most chips also support an Atheros Turbo Mode (TM) that operates in
-the 5Ghz frequency range with 2x the transmit speeds.
-Some chips also support Turbo mode in the 2.4Ghz range with 802.11g
+the 5GHz frequency range with 2x the transmit speeds.
+Some chips also support Turbo mode in the 2.4GHz range with 802.11g
though this support is not presently available due to regulatory requirements.
(Note that Turbo modes are, however,
only interoperable with other Atheros-based devices.)
diff --git a/share/man/man4/net80211.4 b/share/man/man4/net80211.4
index 1af240d53ef3..967bbe983f9e 100644
--- a/share/man/man4/net80211.4
+++ b/share/man/man4/net80211.4
@@ -280,7 +280,7 @@ Return whether or not Dynamic Frequency Selection (DFS) is enabled in
DFS embodies several facilities including detection of overlapping
radar signals, dynamic transmit power control, and channel selection
according to a least-congested criteria.
-DFS support is mandatory for some 5Ghz frequencies in certain
+DFS support is mandatory for some 5GHz frequencies in certain
locales (e.g. ETSI).
By default DFS is enabled according to the regulatory definitions
and the current country code, regdomain, and channel.
diff --git a/sys/conf/NOTES b/sys/conf/NOTES
index 0ce305cc63c6..63457cdd20e8 100644
--- a/sys/conf/NOTES
+++ b/sys/conf/NOTES
@@ -2417,11 +2417,11 @@ device cmx
# or
# options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC
# Specifies the default video capture mode.
-# This is required for Dual Crystal (28&35Mhz) boards where PAL is used
+# This is required for Dual Crystal (28&35MHz) boards where PAL is used
# to prevent hangs during initialization, e.g. VideoLogic Captivator PCI.
#
# options BKTR_USE_PLL
-# This is required for PAL or SECAM boards with a 28Mhz crystal and no 35Mhz
+# This is required for PAL or SECAM boards with a 28MHz crystal and no 35MHz
# crystal, e.g. some new Bt878 cards.
#
# options BKTR_GPIO_ACCESS
diff --git a/sys/dev/ath/if_ath_sysctl.c b/sys/dev/ath/if_ath_sysctl.c
index 57781f50fe83..73439198e71e 100644
--- a/sys/dev/ath/if_ath_sysctl.c
+++ b/sys/dev/ath/if_ath_sysctl.c
@@ -912,7 +912,7 @@ ath_sysctl_hal_attach(struct ath_softc *sc)
sc->sc_ah->ah_config.ah_ar5416_biasadj = 0;
SYSCTL_ADD_INT(ctx, child, OID_AUTO, "ar5416_biasadj", CTLFLAG_RW,
&sc->sc_ah->ah_config.ah_ar5416_biasadj, 0,
- "Enable 2ghz AR5416 direction sensitivity bias adjust");
+ "Enable 2GHz AR5416 direction sensitivity bias adjust");
sc->sc_ah->ah_config.ah_dma_beacon_response_time = 2;
SYSCTL_ADD_INT(ctx, child, OID_AUTO, "dma_brt", CTLFLAG_RW,
diff --git a/sys/dev/siba/siba_core.c b/sys/dev/siba/siba_core.c
index 4c7dfee30d24..91f44f3e7bec 100644
--- a/sys/dev/siba/siba_core.c
+++ b/sys/dev/siba/siba_core.c
@@ -1207,7 +1207,7 @@ siba_cc_pmu0_pll0_init(struct siba_cc *scc, uint32_t xtalfreq)
if (((pmu & SIBA_CC_PMUCTL_XF) >> 2) == e->xf)
return;
- DPRINTF(siba, SIBA_DEBUG_PLL, "change PLL value to %u.%03u mhz\n",
+ DPRINTF(siba, SIBA_DEBUG_PLL, "change PLL value to %u.%03u MHz\n",
(xtalfreq / 1000), (xtalfreq % 1000));
KASSERT(siba->siba_chipid == 0x4328 || siba->siba_chipid == 0x5354,
diff --git a/sys/ia64/ia64/machdep.c b/sys/ia64/ia64/machdep.c
index 349800d0341f..26fb5257d008 100644
--- a/sys/ia64/ia64/machdep.c
+++ b/sys/ia64/ia64/machdep.c
@@ -245,7 +245,7 @@ identifycpu(void)
printf("CPU: %s (", model_name);
if (cpu_freq)
- printf("%u Mhz ", cpu_freq);
+ printf("%u MHz ", cpu_freq);
printf("%s)\n", family_name);
printf(" Origin = \"%s\" Revision = %d\n", vendor, revision);
printf(" Features = 0x%b\n", (u_int32_t) features,
diff --git a/sys/mips/rt305x/rt305x_sysctl.c b/sys/mips/rt305x/rt305x_sysctl.c
index 7a3b0c2e0916..7c0d36da012d 100644
--- a/sys/mips/rt305x/rt305x_sysctl.c
+++ b/sys/mips/rt305x/rt305x_sysctl.c
@@ -84,7 +84,7 @@ rt305x_sysctl_dump_config(device_t dev)
if ( val & SYSCTL_SYSCFG_BIG_ENDIAN)
printf("\tBig Endian\n");
if ( val & SYSCTL_SYSCFG_CPU_CLK_SEL_384MHZ)
- printf("\tClock is 384Mhz\n");
+ printf("\tClock is 384MHz\n");
printf("\tBoot from %u\n",
((val & SYSCTL_SYSCFG_BOOT_FROM_MASK) >>
SYSCTL_SYSCFG_BOOT_FROM_SHIFT));
@@ -109,7 +109,7 @@ rt305x_sysctl_dump_config(device_t dev)
printf("\tI2S clock is enabled\n");
printf("\tI2S clock is %s\n",
(val & SYSCTL_CLKCFG1_I2S_CLK_SEL_EXT)?
- "external":"internal 15.625Mhz");
+ "external":"internal 15.625MHz");
printf("\tI2S clock divider %u\n",
((val & SYSCTL_CLKCFG1_I2S_CLK_DIV_MASK) >>
SYSCTL_CLKCFG1_I2S_CLK_DIV_SHIFT));
@@ -118,7 +118,7 @@ rt305x_sysctl_dump_config(device_t dev)
printf("\tPCM clock is %s\n",
(val & SYSCTL_CLKCFG1_PCM_CLK_SEL_EXT)?
- "external":"internal 15.625Mhz");
+ "external":"internal 15.625MHz");
printf("\tPCM clock divider %u\n",
((val & SYSCTL_CLKCFG1_PCM_CLK_DIV_MASK) >>
SYSCTL_CLKCFG1_PCM_CLK_DIV_SHIFT));
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-23 16:43:45 +0000