diff options
| -rw-r--r-- | sys/arm/broadcom/bcm2835/raspberrypi_gpio.c | 457 | ||||
| -rw-r--r-- | sys/conf/files.arm64 | 1 |
2 files changed, 458 insertions, 0 deletions
diff --git a/sys/arm/broadcom/bcm2835/raspberrypi_gpio.c b/sys/arm/broadcom/bcm2835/raspberrypi_gpio.c new file mode 100644 index 000000000000..d79d39ff1497 --- /dev/null +++ b/sys/arm/broadcom/bcm2835/raspberrypi_gpio.c @@ -0,0 +1,457 @@ +/*- + * SPDX-License-Identifier: BSD-2-Clause-FreeBSD + * + * Copyright (c) 2012 Oleksandr Tymoshenko <gonzo@FreeBSD.org> + * Copyright (c) 2012-2015 Luiz Otavio O Souza <loos@FreeBSD.org> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + */ +#include <sys/cdefs.h> +__FBSDID("$FreeBSD$"); + +#include "opt_platform.h" + +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/bus.h> +#include <sys/gpio.h> +#include <sys/kernel.h> +#include <sys/lock.h> +#include <sys/module.h> +#include <sys/sx.h> +#include <sys/proc.h> + +#include <dev/gpio/gpiobusvar.h> +#include <dev/ofw/ofw_bus.h> + +#include <arm/broadcom/bcm2835/bcm2835_firmware.h> + +#include "gpio_if.h" + +#define RPI_FW_GPIO_PINS 8 +#define RPI_FW_GPIO_BASE 128 +#define RPI_FW_GPIO_DEFAULT_CAPS (GPIO_PIN_INPUT | GPIO_PIN_OUTPUT) + +struct rpi_fw_gpio_softc { + device_t sc_busdev; + device_t sc_firmware; + struct sx sc_sx; + struct gpio_pin sc_gpio_pins[RPI_FW_GPIO_PINS]; + uint8_t sc_gpio_state; +}; + +#define RPI_FW_GPIO_LOCK(_sc) sx_xlock(&(_sc)->sc_sx) +#define RPI_FW_GPIO_UNLOCK(_sc) sx_xunlock(&(_sc)->sc_sx) + +static struct ofw_compat_data compat_data[] = { + {"raspberrypi,firmware-gpio", 1}, + {NULL, 0} +}; + +static int +rpi_fw_gpio_pin_configure(struct rpi_fw_gpio_softc *sc, struct gpio_pin *pin, + unsigned int flags) +{ + union msg_get_gpio_config old_cfg; + union msg_set_gpio_config new_cfg; + int rv; + + bzero(&old_cfg, sizeof(old_cfg)); + bzero(&new_cfg, sizeof(new_cfg)); + old_cfg.req.gpio = RPI_FW_GPIO_BASE + pin->gp_pin; + + RPI_FW_GPIO_LOCK(sc); + rv = bcm2835_firmware_property(sc->sc_firmware, + BCM2835_FIRMWARE_TAG_GET_GPIO_CONFIG, &old_cfg, sizeof(old_cfg)); + if (rv == 0 && old_cfg.resp.gpio != 0) + rv = EIO; + if (rv != 0) + goto fail; + + new_cfg.req.gpio = RPI_FW_GPIO_BASE + pin->gp_pin; + if (flags & GPIO_PIN_INPUT) { + new_cfg.req.dir = BCM2835_FIRMWARE_GPIO_IN; + new_cfg.req.state = 0; + pin->gp_flags = GPIO_PIN_INPUT; + } else if (flags & GPIO_PIN_OUTPUT) { + new_cfg.req.dir = BCM2835_FIRMWARE_GPIO_OUT; + if (flags & (GPIO_PIN_PRESET_HIGH | GPIO_PIN_PRESET_LOW)) { + if (flags & GPIO_PIN_PRESET_HIGH) { + new_cfg.req.state = 1; + sc->sc_gpio_state |= (1 << pin->gp_pin); + } else { + new_cfg.req.state = 0; + sc->sc_gpio_state &= ~(1 << pin->gp_pin); + } + } else { + if ((sc->sc_gpio_state & (1 << pin->gp_pin)) != 0) { + new_cfg.req.state = 1; + } else { + new_cfg.req.state = 0; + } + } + pin->gp_flags = GPIO_PIN_OUTPUT; + } else { + new_cfg.req.dir = old_cfg.resp.dir; + /* Use the old state to decide high/low */ + if ((sc->sc_gpio_state & (1 << pin->gp_pin)) != 0) + new_cfg.req.state = 1; + else + new_cfg.req.state = 0; + } + new_cfg.req.pol = old_cfg.resp.pol; + new_cfg.req.term_en = 0; + new_cfg.req.term_pull_up = 0; + + rv = bcm2835_firmware_property(sc->sc_firmware, + BCM2835_FIRMWARE_TAG_SET_GPIO_CONFIG, &new_cfg, sizeof(new_cfg)); + +fail: + RPI_FW_GPIO_UNLOCK(sc); + + return (rv); +} + +static device_t +rpi_fw_gpio_get_bus(device_t dev) +{ + struct rpi_fw_gpio_softc *sc; + + sc = device_get_softc(dev); + + return (sc->sc_busdev); +} + +static int +rpi_fw_gpio_pin_max(device_t dev, int *maxpin) +{ + + *maxpin = RPI_FW_GPIO_PINS - 1; + return (0); +} + +static int +rpi_fw_gpio_pin_getcaps(device_t dev, uint32_t pin, uint32_t *caps) +{ + struct rpi_fw_gpio_softc *sc; + int i; + + sc = device_get_softc(dev); + for (i = 0; i < RPI_FW_GPIO_PINS; i++) { + if (sc->sc_gpio_pins[i].gp_pin == pin) + break; + } + + if (i >= RPI_FW_GPIO_PINS) + return (EINVAL); + + *caps = RPI_FW_GPIO_DEFAULT_CAPS; + return (0); +} + +static int +rpi_fw_gpio_pin_getflags(device_t dev, uint32_t pin, uint32_t *flags) +{ + struct rpi_fw_gpio_softc *sc = device_get_softc(dev); + int i; + + for (i = 0; i < RPI_FW_GPIO_PINS; i++) { + if (sc->sc_gpio_pins[i].gp_pin == pin) + break; + } + + if (i >= RPI_FW_GPIO_PINS) + return (EINVAL); + + RPI_FW_GPIO_LOCK(sc); + *flags = sc->sc_gpio_pins[i].gp_flags; + RPI_FW_GPIO_UNLOCK(sc); + + return (0); +} + +static int +rpi_fw_gpio_pin_getname(device_t dev, uint32_t pin, char *name) +{ + struct rpi_fw_gpio_softc *sc; + int i; + + sc = device_get_softc(dev); + for (i = 0; i < RPI_FW_GPIO_PINS; i++) { + if (sc->sc_gpio_pins[i].gp_pin == pin) + break; + } + + if (i >= RPI_FW_GPIO_PINS) + return (EINVAL); + + RPI_FW_GPIO_LOCK(sc); + memcpy(name, sc->sc_gpio_pins[i].gp_name, GPIOMAXNAME); + RPI_FW_GPIO_UNLOCK(sc); + + return (0); +} + +static int +rpi_fw_gpio_pin_setflags(device_t dev, uint32_t pin, uint32_t flags) +{ + struct rpi_fw_gpio_softc *sc; + int i; + + sc = device_get_softc(dev); + for (i = 0; i < RPI_FW_GPIO_PINS; i++) { + if (sc->sc_gpio_pins[i].gp_pin == pin) + break; + } + + if (i >= RPI_FW_GPIO_PINS) + return (EINVAL); + + return (rpi_fw_gpio_pin_configure(sc, &sc->sc_gpio_pins[i], flags)); +} + +static int +rpi_fw_gpio_pin_set(device_t dev, uint32_t pin, unsigned int value) +{ + struct rpi_fw_gpio_softc *sc; + union msg_set_gpio_state state; + int i, rv; + + sc = device_get_softc(dev); + for (i = 0; i < RPI_FW_GPIO_PINS; i++) { + if (sc->sc_gpio_pins[i].gp_pin == pin) + break; + } + if (i >= RPI_FW_GPIO_PINS) + return (EINVAL); + + state.req.gpio = RPI_FW_GPIO_BASE + pin; + state.req.state = value; + + RPI_FW_GPIO_LOCK(sc); + rv = bcm2835_firmware_property(sc->sc_firmware, + BCM2835_FIRMWARE_TAG_SET_GPIO_STATE, &state, sizeof(state)); + /* The firmware sets gpio to 0 on success */ + if (rv == 0 && state.resp.gpio != 0) + rv = EINVAL; + if (rv == 0) { + sc->sc_gpio_pins[i].gp_flags &= ~(GPIO_PIN_PRESET_HIGH | + GPIO_PIN_PRESET_LOW); + if (value) + sc->sc_gpio_state |= (1 << i); + else + sc->sc_gpio_state &= ~(1 << i); + } + RPI_FW_GPIO_UNLOCK(sc); + + return (rv); +} + +static int +rpi_fw_gpio_pin_get(device_t dev, uint32_t pin, unsigned int *val) +{ + struct rpi_fw_gpio_softc *sc; + union msg_get_gpio_state state; + int i, rv; + + sc = device_get_softc(dev); + for (i = 0; i < RPI_FW_GPIO_PINS; i++) { + if (sc->sc_gpio_pins[i].gp_pin == pin) + break; + } + if (i >= RPI_FW_GPIO_PINS) + return (EINVAL); + + bzero(&state, sizeof(state)); + state.req.gpio = RPI_FW_GPIO_BASE + pin; + + RPI_FW_GPIO_LOCK(sc); + rv = bcm2835_firmware_property(sc->sc_firmware, + BCM2835_FIRMWARE_TAG_GET_GPIO_STATE, &state, sizeof(state)); + RPI_FW_GPIO_UNLOCK(sc); + + /* The firmware sets gpio to 0 on success */ + if (rv == 0 && state.resp.gpio != 0) + rv = EINVAL; + if (rv == 0) + *val = !state.resp.state; + + return (rv); +} + +static int +rpi_fw_gpio_pin_toggle(device_t dev, uint32_t pin) +{ + struct rpi_fw_gpio_softc *sc; + union msg_get_gpio_state old_state; + union msg_set_gpio_state new_state; + int i, rv; + + sc = device_get_softc(dev); + for (i = 0; i < RPI_FW_GPIO_PINS; i++) { + if (sc->sc_gpio_pins[i].gp_pin == pin) + break; + } + if (i >= RPI_FW_GPIO_PINS) + return (EINVAL); + + bzero(&old_state, sizeof(old_state)); + bzero(&new_state, sizeof(new_state)); + + old_state.req.gpio = RPI_FW_GPIO_BASE + pin; + new_state.req.gpio = RPI_FW_GPIO_BASE + pin; + + RPI_FW_GPIO_LOCK(sc); + rv = bcm2835_firmware_property(sc->sc_firmware, + BCM2835_FIRMWARE_TAG_GET_GPIO_STATE, &old_state, sizeof(old_state)); + /* The firmware sets gpio to 0 on success */ + if (rv == 0 && old_state.resp.gpio == 0) { + /* Set the new state to invert the GPIO */ + new_state.req.state = !old_state.resp.state; + rv = bcm2835_firmware_property(sc->sc_firmware, + BCM2835_FIRMWARE_TAG_SET_GPIO_STATE, &new_state, + sizeof(new_state)); + } + if (rv == 0 && (old_state.resp.gpio != 0 || new_state.resp.gpio != 0)) + rv = EINVAL; + RPI_FW_GPIO_UNLOCK(sc); + + return (rv); +} + +static int +rpi_fw_gpio_probe(device_t dev) +{ + + if (!ofw_bus_status_okay(dev)) + return (ENXIO); + + if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0) + return (ENXIO); + + device_set_desc(dev, "Raspberry Pi Firmware GPIO controller"); + return (BUS_PROBE_DEFAULT); +} + +static int +rpi_fw_gpio_attach(device_t dev) +{ + union msg_get_gpio_config cfg; + struct rpi_fw_gpio_softc *sc; + char *names; + phandle_t gpio; + int i, nelems, elm_pos, rv; + + sc = device_get_softc(dev); + sc->sc_firmware = device_get_parent(dev); + sx_init(&sc->sc_sx, "Raspberry Pi firmware gpio"); + /* Find our node. */ + gpio = ofw_bus_get_node(dev); + if (!OF_hasprop(gpio, "gpio-controller")) + /* This is not a GPIO controller. */ + goto fail; + + nelems = OF_getprop_alloc(gpio, "gpio-line-names", (void **)&names); + if (nelems <= 0) + names = NULL; + elm_pos = 0; + for (i = 0; i < RPI_FW_GPIO_PINS; i++) { + /* Set the current pin name */ + if (names != NULL && elm_pos < nelems && + names[elm_pos] != '\0') { + snprintf(sc->sc_gpio_pins[i].gp_name, GPIOMAXNAME, + "%s", names + elm_pos); + /* Find the next pin name */ + elm_pos += strlen(names + elm_pos) + 1; + } else { + snprintf(sc->sc_gpio_pins[i].gp_name, GPIOMAXNAME, + "pin %d", i); + } + + sc->sc_gpio_pins[i].gp_pin = i; + sc->sc_gpio_pins[i].gp_caps = RPI_FW_GPIO_DEFAULT_CAPS; + + bzero(&cfg, sizeof(cfg)); + cfg.req.gpio = RPI_FW_GPIO_BASE + i; + rv = bcm2835_firmware_property(sc->sc_firmware, + BCM2835_FIRMWARE_TAG_GET_GPIO_CONFIG, &cfg, sizeof(cfg)); + if (rv == 0 && cfg.resp.gpio == 0) { + if (cfg.resp.dir == BCM2835_FIRMWARE_GPIO_IN) + sc->sc_gpio_pins[i].gp_flags = GPIO_PIN_INPUT; + else + sc->sc_gpio_pins[i].gp_flags = GPIO_PIN_OUTPUT; + } else { + sc->sc_gpio_pins[i].gp_flags = GPIO_PIN_INPUT; + } + } + free(names, M_OFWPROP); + sc->sc_busdev = gpiobus_attach_bus(dev); + if (sc->sc_busdev == NULL) + goto fail; + + return (0); + +fail: + sx_destroy(&sc->sc_sx); + + return (ENXIO); +} + +static int +rpi_fw_gpio_detach(device_t dev) +{ + + return (EBUSY); +} + +static device_method_t rpi_fw_gpio_methods[] = { + /* Device interface */ + DEVMETHOD(device_probe, rpi_fw_gpio_probe), + DEVMETHOD(device_attach, rpi_fw_gpio_attach), + DEVMETHOD(device_detach, rpi_fw_gpio_detach), + + /* GPIO protocol */ + DEVMETHOD(gpio_get_bus, rpi_fw_gpio_get_bus), + DEVMETHOD(gpio_pin_max, rpi_fw_gpio_pin_max), + DEVMETHOD(gpio_pin_getname, rpi_fw_gpio_pin_getname), + DEVMETHOD(gpio_pin_getflags, rpi_fw_gpio_pin_getflags), + DEVMETHOD(gpio_pin_getcaps, rpi_fw_gpio_pin_getcaps), + DEVMETHOD(gpio_pin_setflags, rpi_fw_gpio_pin_setflags), + DEVMETHOD(gpio_pin_get, rpi_fw_gpio_pin_get), + DEVMETHOD(gpio_pin_set, rpi_fw_gpio_pin_set), + DEVMETHOD(gpio_pin_toggle, rpi_fw_gpio_pin_toggle), + + DEVMETHOD_END +}; + +static devclass_t rpi_fw_gpio_devclass; + +static driver_t rpi_fw_gpio_driver = { + "gpio", + rpi_fw_gpio_methods, + sizeof(struct rpi_fw_gpio_softc), +}; + +EARLY_DRIVER_MODULE(rpi_fw_gpio, bcm2835_firmware, rpi_fw_gpio_driver, + rpi_fw_gpio_devclass, 0, 0, BUS_PASS_INTERRUPT + BUS_PASS_ORDER_LATE); diff --git a/sys/conf/files.arm64 b/sys/conf/files.arm64 index e8a0cfc95f0d..7bae8741eec6 100644 --- a/sys/conf/files.arm64 +++ b/sys/conf/files.arm64 @@ -108,6 +108,7 @@ arm/broadcom/bcm2835/bcm2836.c optional soc_brcm_bcm2837 fdt | soc_brcm_bcm283 arm/broadcom/bcm2835/bcm283x_dwc_fdt.c optional dwcotg fdt soc_brcm_bcm2837 | dwcotg fdt soc_brcm_bcm2838 arm/broadcom/bcm2835/bcm2838_pci.c optional soc_brcm_bcm2838 fdt pci arm/broadcom/bcm2835/bcm2838_xhci.c optional soc_brcm_bcm2838 fdt pci xhci +arm/broadcom/bcm2835/raspberrypi_gpio.c optional soc_brcm_bcm2837 gpio | soc_brcm_bcm2838 gpio arm/freescale/vybrid/vf_i2c.c optional vf_i2c iicbus SOC_NXP_LS arm/mv/a37x0_gpio.c optional a37x0_gpio gpio fdt arm/mv/a37x0_iic.c optional a37x0_iic iicbus fdt |