diff options
43 files changed, 105 insertions, 61 deletions
diff --git a/bin/csh/USD.doc/csh.1 b/bin/csh/USD.doc/csh.1 index 6bc0856b5932..1ca1f4d07fda 100644 --- a/bin/csh/USD.doc/csh.1 +++ b/bin/csh/USD.doc/csh.1 @@ -30,7 +30,7 @@ .\" SUCH DAMAGE. .\" .\" @(#)csh.1 8.1 (Berkeley) 6/8/93 -.\" $Id$ +.\" $Id: csh.1,v 1.2 1994/09/24 02:54:23 davidg Exp $ .\" .EH 'USD:4-%''An Introduction to the C shell' .OH 'An Introduction to the C shell''USD:4-%' @@ -617,7 +617,7 @@ order than we listed them above. The .I echo command receives four words as arguments, even though we only typed -one word as as argument directly. +one word as an argument directly. The four words were generated by .I "filename expansion" of the one input word. diff --git a/bin/csh/USD.doc/csh.2 b/bin/csh/USD.doc/csh.2 index 88711139d362..f7998a0c7cb9 100644 --- a/bin/csh/USD.doc/csh.2 +++ b/bin/csh/USD.doc/csh.2 @@ -30,7 +30,7 @@ .\" SUCH DAMAGE. .\" .\" @(#)csh.2 8.1 (Berkeley) 6/8/93 -.\" $Id$ +.\" $Id: csh.2,v 1.2 1994/09/24 02:54:24 davidg Exp $ .\" .nr H1 1 .NH @@ -1300,7 +1300,7 @@ One useful feature which is discussed later is the built-in command which can be used to run the same command sequence with a number of different arguments. .PP -If you intend to use \s-2UNIX\s0 a lot you you should look through +If you intend to use \s-2UNIX\s0 a lot you should look through the rest of this document and the csh manual pages (section1) to become familiar with the other facilities which are available to you. .bp diff --git a/bin/ed/ed.1 b/bin/ed/ed.1 index 9eec5d987f33..dd5369d65c72 100644 --- a/bin/ed/ed.1 +++ b/bin/ed/ed.1 @@ -1,4 +1,4 @@ -.\" $Id: ed.1,v 1.6 1994/09/24 02:55:24 davidg Exp $ +.\" $Id: ed.1,v 1.7 1996/08/29 18:05:50 wosch Exp $ .TH ED 1 "21 May 1993" .SH NAME .\" ed, red \- text editor @@ -167,7 +167,7 @@ and is legal wherever it makes sense. An address range is two addresses separated either by a comma or semi-colon. The value of the first address in a range cannot exceed the -value of the the second. If only one address is given in a range, then +value of the second. If only one address is given in a range, then the second address is set to the given address. If an .IR n- tuple of addresses is given where diff --git a/contrib/cvs/man/cvs.1 b/contrib/cvs/man/cvs.1 index 7cef6e5e551b..ce9584ea6532 100644 --- a/contrib/cvs/man/cvs.1 +++ b/contrib/cvs/man/cvs.1 @@ -1,3 +1,5 @@ +.\" $Id$ +.\" .de Id .ds Rv \\$3 .ds Dt \\$4 @@ -1274,7 +1276,7 @@ Each file is searched for the revision or tag. .TP 1i \fB\ \ \ \ \ \ \-t\fP \fItag\fP -Show records since tag \fItag\fP was last added to the the history file. +Show records since tag \fItag\fP was last added to the history file. This differs from the \fB-r\fP flag above in that it reads only the history file, not the .SM RCS diff --git a/contrib/libpcap/pcap.3 b/contrib/libpcap/pcap.3 index 7f9f15baa802..b88a5182fc6d 100644 --- a/contrib/libpcap/pcap.3 +++ b/contrib/libpcap/pcap.3 @@ -17,6 +17,8 @@ .\" WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF .\" MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. .\" +.\" $Id$ +.\" .TH PCAP 3 "18 July 1996" .SH NAME pcap \- Packet Capture library @@ -152,7 +154,7 @@ If there is an error, .B NULL is returned and .I errbuf -is filled in with with an appropriate error message. +is filled in with an appropriate error message. .PP .B pcap_lookupnet() is used to determine the network number and mask @@ -167,7 +169,7 @@ are pointers. A return of -1 indicates an error in which case .I errbuf -is filled in with with an appropriate error message. +is filled in with an appropriate error message. .PP .B pcap_dispatch() is used to collect and process packets. diff --git a/contrib/tcl/doc/FindExec.3 b/contrib/tcl/doc/FindExec.3 index 10342cc71485..be6e1f3cc3a0 100644 --- a/contrib/tcl/doc/FindExec.3 +++ b/contrib/tcl/doc/FindExec.3 @@ -5,6 +5,7 @@ '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. '\" '\" SCCS: @(#) FindExec.3 1.3 96/03/25 20:03:17 +'\" $Id$ '\" .so man.macros .TH Tcl_FindExecutable 3 7.5 Tcl "Tcl Library Procedures" @@ -30,7 +31,7 @@ This procedure computes the full path name of the executable file from which the application was invoked and saves it for Tcl's internal use. The executable's path name is needed for several purposes in -Tcl. For example, is is needed on some platforms in the +Tcl. For example, it is needed on some platforms in the implementation of the \fBload\fR command. It is also returned by the \fBinfo nameofexecutable\fR command. .PP diff --git a/contrib/tcl/doc/break.n b/contrib/tcl/doc/break.n index 6b3a47bd3a6d..a1640a862b44 100644 --- a/contrib/tcl/doc/break.n +++ b/contrib/tcl/doc/break.n @@ -6,6 +6,7 @@ '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. '\" '\" SCCS: @(#) break.n 1.6 96/03/25 20:10:27 +'\" $Id$ '\" .so man.macros .TH break n "" Tcl "Tcl Built-In Commands" @@ -24,7 +25,7 @@ such as \fBfor\fR or \fBforeach\fR or \fBwhile\fR. It returns a TCL_BREAK code, which causes a break exception to occur. The exception causes the current script to be aborted -out to the the innermost containing loop command, which then +out to the innermost containing loop command, which then aborts its execution and returns normally. Break exceptions are also handled in a few other situations, such as the \fBcatch\fR command, Tk event bindings, and the outermost diff --git a/contrib/tcl/doc/continue.n b/contrib/tcl/doc/continue.n index 75434a89e7df..b5dc7af2cc2a 100644 --- a/contrib/tcl/doc/continue.n +++ b/contrib/tcl/doc/continue.n @@ -6,6 +6,7 @@ '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. '\" '\" SCCS: @(#) continue.n 1.6 96/03/25 20:12:09 +'\" $Id$ '\" .so man.macros .TH continue n "" Tcl "Tcl Built-In Commands" @@ -24,7 +25,7 @@ such as \fBfor\fR or \fBforeach\fR or \fBwhile\fR. It returns a TCL_CONTINUE code, which causes a continue exception to occur. The exception causes the current script to be aborted -out to the the innermost containing loop command, which then +out to the innermost containing loop command, which then continues with the next iteration of the loop. Catch exceptions are also handled in a few other situations, such as the \fBcatch\fR command and the outermost scripts of procedure diff --git a/contrib/tcl/doc/expr.n b/contrib/tcl/doc/expr.n index e8a80e98e4c0..9b7b60fadf6f 100644 --- a/contrib/tcl/doc/expr.n +++ b/contrib/tcl/doc/expr.n @@ -6,6 +6,7 @@ '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. '\" '\" SCCS: @(#) expr.n 1.17 96/03/14 10:54:40 +'\" $Id$ '\" .so man.macros .TH expr n 7.4 Tcl "Tcl Built-In Commands" @@ -259,7 +260,7 @@ example, \fBexpr 20.0/5.0\fR .CE returns ``4.0'', not ``4''. The global variable \fBtcl_precision\fR -determines the the number of significant digits that are retained +determines the number of significant digits that are retained when floating values are converted to strings (except that trailing zeroes are omitted). If \fBtcl_precision\fR is unset then 6 digits of precision are used. diff --git a/contrib/tcl/doc/unknown.n b/contrib/tcl/doc/unknown.n index 6f2fd65bcf9a..2f4ba74c7dba 100644 --- a/contrib/tcl/doc/unknown.n +++ b/contrib/tcl/doc/unknown.n @@ -6,6 +6,7 @@ '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. '\" '\" SCCS: @(#) unknown.n 1.7 96/03/25 20:26:05 +'\" $Id$ '\" .so man.macros .TH unknown n "" Tcl "Tcl Built-In Commands" @@ -52,7 +53,7 @@ If so, it invokes the Tcl \fBexec\fR command with \fIcmd\fR and all the \fIargs\fR as arguments. If \fIcmd\fR can't be auto-executed, \fBunknown\fR checks to see if the command was invoked at top-level and outside of any -script. If so, then \fBunknown\fR takes takes two additional steps. +script. If so, then \fBunknown\fR takes two additional steps. First, it sees if \fIcmd\fR has one of the following three forms: \fB!!\fR, \fB!\fIevent\fR, or \fB^\fIold\fB^\fInew\fR?\fB^\fR?. If so, then \fBunknown\fR carries out history substitution diff --git a/games/phantasia/phantasia.6 b/games/phantasia/phantasia.6 index a7cb7f1a3969..5fc64a3e2efc 100644 --- a/games/phantasia/phantasia.6 +++ b/games/phantasia/phantasia.6 @@ -1,3 +1,5 @@ +.\" $Id$ +.\" .de sh .br .ne 5 @@ -1164,7 +1166,7 @@ and a player may posses, based upon .B level. .I Quicksilver -is always limited to to a maximum of 99. +is always limited to a maximum of 99. .PP .I Books bought at a diff --git a/games/sail/sail.6 b/games/sail/sail.6 index e1cf4cbc7522..6fb647be459c 100644 --- a/games/sail/sail.6 +++ b/games/sail/sail.6 @@ -30,6 +30,7 @@ .\" SUCH DAMAGE. .\" .\" @(#)sail.6 8.2 (Berkeley) 12/30/93 +.\" $Id$ .\" .TH SAIL 6 "December 30, 1993" .UC 4 @@ -254,7 +255,7 @@ any fleet were its "Ships of the Line", or "Line of Battle Ships". They were so named because these ships fought together in great lines. They were close enough for mutual support, yet every ship could fire both its broadsides. We get the modern words "ocean liner," or "liner," and "battleship" from -"ship of the line." The most common size was the the 74 gun two decked +"ship of the line." The most common size was the 74 gun two decked ship of the line. The two gun decks usually mounted 18 and 24 pounder guns. .PP The pride of the fleet were the first rates. These were huge three decked diff --git a/gnu/usr.bin/bc/bc.1 b/gnu/usr.bin/bc/bc.1 index b387f92d700d..b1f50ca04034 100644 --- a/gnu/usr.bin/bc/bc.1 +++ b/gnu/usr.bin/bc/bc.1 @@ -25,6 +25,7 @@ .\" Western Washington University .\" Bellingham, WA 98226-9062 .\" +.\" $Id$ .\" .TH bc 1 .\" "Command Manual" v1.02 "Feb 3, 1992" .SH NAME @@ -310,7 +311,7 @@ precision, some numbers may not be printable on a single output line. These long numbers will be split across lines using the "\e" as the last character on a line. The maximum number of characters printed per line is 70. Due to the interactive nature of \fBbc\fR printing -a number cause the side effect of assigning the printed value the the +a number cause the side effect of assigning the printed value the special variable \fBlast\fR. This allows the user to recover the last value printed without having to retype the expression that printed the number. Assigning to \fBlast\fR is legal and will @@ -327,7 +328,7 @@ The print statement (an extension) provides another method of output. The "list" is a list of strings and expressions separated by commas. Each string or expression is printed in the order of the list. No terminating newline is printed. Expressions are evaluated and their -value is printed and assigned the the variable \fBlast\fR. Strings +value is printed and assigned the variable \fBlast\fR. Strings in the print statement are printed to the output and may contain special characters. Special characters start with the backslash character (\e). The special characters recognized by \fBbc\fR are diff --git a/gnu/usr.bin/perl/perl/perl.1 b/gnu/usr.bin/perl/perl/perl.1 index 15791c22b691..38ce017badf6 100644 --- a/gnu/usr.bin/perl/perl/perl.1 +++ b/gnu/usr.bin/perl/perl/perl.1 @@ -1,7 +1,13 @@ .rn '' }` -''' $RCSfile: perl.1,v $$Revision: 1.1.1.1 $$Date: 1994/09/10 06:27:36 $ +''' $RCSfile: perl.1,v $$Revision: 1.2 $$Date: 1994/10/27 23:16:52 $ ''' ''' $Log: perl.1,v $ +''' Revision 1.2 1994/10/27 23:16:52 wollman +''' Convince Perl to that is is part of the system, as /usr/bin/perl (binary) +''' and /usr/share/perl (library). The latter was chosen as analogous to other +''' directories already present in /usr/share, like /usr/share/groff_font and +''' (particularly) /usr/share/mk. +''' .\" Revision 1.1.1.1 1994/09/10 06:27:36 gclarkii .\" Initial import of Perl 4.046 bmaked .\" @@ -505,7 +511,7 @@ If a directory name is specified, Perl will switch to that directory before running the script. The .B \-x -switch only controls the the disposal of leading garbage. +switch only controls the disposal of leading garbage. The script must be terminated with _\|_END_\|_ if there is trailing garbage to be ignored (the script can process any or all of the trailing garbage via the DATA filehandle if desired). diff --git a/gnu/usr.bin/texinfo/info/info.1 b/gnu/usr.bin/texinfo/info/info.1 index aabfcf12962d..cd88463b9bf5 100644 --- a/gnu/usr.bin/texinfo/info/info.1 +++ b/gnu/usr.bin/texinfo/info/info.1 @@ -1,3 +1,5 @@ +.\" $Id$ +.\" .TH info 1 "7th December 1990" .SH NAME info \- GNU's hypertext system @@ -148,7 +150,7 @@ Pick a menu item specified by name. Picking a menu item causes another node to be selected. You do not need to type a complete nodename; if you type a few letters and then a space or tab .B info -will will try to fill in the rest of the nodename. If you ask for further +will try to fill in the rest of the nodename. If you ask for further completion without typing any more characters you'll be given a list of possibilities; you can also get the list with .B ?. diff --git a/lib/libc/db/man/mpool.3 b/lib/libc/db/man/mpool.3 index c17606ebc9b9..e625dc4514b5 100644 --- a/lib/libc/db/man/mpool.3 +++ b/lib/libc/db/man/mpool.3 @@ -30,6 +30,7 @@ .\" SUCH DAMAGE. .\" .\" @(#)mpool.3 8.1 (Berkeley) 6/4/93 +.\" $Id$ .\" .TH MPOOL 3 "June 4, 1993" .UC 7 @@ -115,7 +116,7 @@ If the .I pgout function is specified, it is called each time a buffer is written into the backing file. -Both functions are are called with the +Both functions are called with the .I pgcookie pointer, the page number and a pointer to the page to being read or written. .PP diff --git a/lib/libc/gen/ftok.3 b/lib/libc/gen/ftok.3 index 4b900ece0acc..1130e38bbea0 100644 --- a/lib/libc/gen/ftok.3 +++ b/lib/libc/gen/ftok.3 @@ -23,7 +23,7 @@ .\" OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF .\" ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" -.\" $Id: ftok.3,v 1.3 1996/02/12 07:06:23 mpp Exp $ +.\" $Id: ftok.3,v 1.4 1996/06/03 10:40:39 joerg Exp $ .Dd June 24, 1994 .Os .Dt ftok 3 @@ -82,4 +82,4 @@ specified .Fa path in combination with the lower 8 bits of the given .Fa id . -Thus is is quite possible for the routine to return duplicate keys. +Thus it is quite possible for the routine to return duplicate keys. diff --git a/lib/libc/string/memcmp.3 b/lib/libc/string/memcmp.3 index a859529d6eed..4fbee334f0e1 100644 --- a/lib/libc/string/memcmp.3 +++ b/lib/libc/string/memcmp.3 @@ -34,6 +34,7 @@ .\" SUCH DAMAGE. .\" .\" @(#)memcmp.3 8.1 (Berkeley) 6/4/93 +.\" $Id$ .\" .Dd June 4, 1993 .Dt MEMCMP 3 @@ -60,7 +61,7 @@ bytes long. The .Fn memcmp function -returns zero if the the two strings are identical, +returns zero if the two strings are identical, otherwise returns the difference between the first two differing bytes (treated as unsigned char values, so that .Sq Li \e200 diff --git a/lib/libc/sys/madvise.2 b/lib/libc/sys/madvise.2 index aa9d6881d21d..ad1e000dcd79 100644 --- a/lib/libc/sys/madvise.2 +++ b/lib/libc/sys/madvise.2 @@ -30,6 +30,7 @@ .\" SUCH DAMAGE. .\" .\" @(#)madvise.2 8.1 (Berkeley) 6/9/93 +.\" $Id$ .\" .Dd Jul 19, 1996 .Dt MADVISE 2 @@ -81,7 +82,7 @@ of pages in the specified range. Additionally future references to this address range will incur a page fault. .sp MADV_FREE gives the VM system the freedom to free pages, -and and tells the system that information in the specified page range +and tells the system that information in the specified page range is no longer important. This is an efficient way of allowing malloc(3) to free pages anywhere in the address space, while keeping the address space valid. The next time that the page is referenced, the page might be demand diff --git a/lib/libc/sys/mkdir.2 b/lib/libc/sys/mkdir.2 index 4bf11be80977..0ee02edb7225 100644 --- a/lib/libc/sys/mkdir.2 +++ b/lib/libc/sys/mkdir.2 @@ -30,6 +30,7 @@ .\" SUCH DAMAGE. .\" .\" @(#)mkdir.2 8.2 (Berkeley) 12/11/93 +.\" $Id$ .\" .Dd December 11, 1993 .Dt MKDIR 2 @@ -46,7 +47,7 @@ The directory .Fa path is created with the access permissions specified by .Fa mode -and restricted by the the +and restricted by the .Xr umask 2 of the calling process. .Pp diff --git a/lib/libc/xdr/xdr.3 b/lib/libc/xdr/xdr.3 index ae1ea860518c..57204ccebada 100644 --- a/lib/libc/xdr/xdr.3 +++ b/lib/libc/xdr/xdr.3 @@ -1,4 +1,6 @@ .\" @(#)xdr.3n 2.2 88/08/03 4.0 RPCSRC; from 1.16 88/03/14 SMI +.\" $Id$ +.\" .TH XDR 3 "16 February 1988" .SH NAME xdr \- library routines for external data representation @@ -753,7 +755,7 @@ parameter .I arrp is the address of the pointer to the array, while .I size -is is the element count of the array. The parameter +is the element count of the array. The parameter .I elsize is the .I sizeof diff --git a/lib/libcompat/SysV/ftok.3 b/lib/libcompat/SysV/ftok.3 index 4b900ece0acc..1130e38bbea0 100644 --- a/lib/libcompat/SysV/ftok.3 +++ b/lib/libcompat/SysV/ftok.3 @@ -23,7 +23,7 @@ .\" OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF .\" ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" -.\" $Id: ftok.3,v 1.3 1996/02/12 07:06:23 mpp Exp $ +.\" $Id: ftok.3,v 1.4 1996/06/03 10:40:39 joerg Exp $ .Dd June 24, 1994 .Os .Dt ftok 3 @@ -82,4 +82,4 @@ specified .Fa path in combination with the lower 8 bits of the given .Fa id . -Thus is is quite possible for the routine to return duplicate keys. +Thus it is quite possible for the routine to return duplicate keys. diff --git a/lib/libftpio/ftpio.3 b/lib/libftpio/ftpio.3 index 15631e7fc827..4304c1c72a0f 100644 --- a/lib/libftpio/ftpio.3 +++ b/lib/libftpio/ftpio.3 @@ -22,6 +22,7 @@ .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" +.\" $Id$ .\" .Dd June 17, 1996 .Dt ftpio 3 @@ -90,7 +91,7 @@ subsequent FTP operations. On failure, NULL is returned and will return the error code returned by the foreign server. .Pp .Fn ftpChdir -attempts to issue a server CD command to the the directory named in +attempts to issue a server CD command to the directory named in .Fa dir. On success, zero is returned. On failure, the error code from the server. .Pp diff --git a/lib/libncurses/curs_addch.3 b/lib/libncurses/curs_addch.3 index 22e57552372d..5b26e32c42de 100644 --- a/lib/libncurses/curs_addch.3 +++ b/lib/libncurses/curs_addch.3 @@ -1,3 +1,5 @@ +.\" $Id$ +.\" .TH curs_addch 3 "" .SH NAME \fBaddch\fR, \fBwaddch\fR, \fBmvaddch\fR, \fBmvwaddch\fR, @@ -52,7 +54,7 @@ these routines instead of their equivalents. The following variables may be used to add line drawing characters to the screen with routines of the \fBaddch\fR family. The default character listed below is used if the \fBacsc\fR capability doesn't define a terminal-specific -replacement for it. The names are taken from the the VT100 nomenclature. +replacement for it. The names are taken from the VT100 nomenclature. .TS l l l diff --git a/lib/libncurses/curs_insstr.3 b/lib/libncurses/curs_insstr.3 index 7e9bb6f91fd3..735dd1b18195 100644 --- a/lib/libncurses/curs_insstr.3 +++ b/lib/libncurses/curs_insstr.3 @@ -1,3 +1,5 @@ +.\" $Id$ +.\" .TH curs_insstr 3 "" .SH NAME \fBinsstr\fR, \fBinsnstr\fR, \fBwinsstr\fR, \fBwinsnstr\fR, @@ -38,7 +40,7 @@ to be at every eighth column. If a character in \fIstr\fR is another control character, it is drawn in the \fB^\fR\fIX\fR notation. Calling \fBwinch\fR after adding a control character (and moving to it, if necessary) does not return the control character, but instead -returns a character in the the ^-representation of the control character. +returns a character in the ^-representation of the control character. .SH RETURN VALUE All routines return the integer \fBERR\fR upon failure and an integer value other than \fBERR\fR upon successful completion. diff --git a/libexec/telnetd/telnetd.8 b/libexec/telnetd/telnetd.8 index a98a0018dcd7..092952d6165a 100644 --- a/libexec/telnetd/telnetd.8 +++ b/libexec/telnetd/telnetd.8 @@ -30,7 +30,7 @@ .\" SUCH DAMAGE. .\" .\" @(#)telnetd.8 8.3 (Berkeley) 3/1/94 -.\" $Id$ +.\" $Id: telnetd.8,v 1.3 1996/09/22 21:55:44 wosch Exp $ .\" .Dd March 1, 1994 .Dt TELNETD 8 @@ -224,7 +224,7 @@ will operate in character at a time mode. It will still support kludge linemode, but will only go into kludge linemode if the remote client requests it. -(This is done by by the client sending +(This is done by the client sending .Dv DONT SUPPRESS-GO-AHEAD and .Dv DONT ECHO . ) diff --git a/sbin/mount_null/mount_null.8 b/sbin/mount_null/mount_null.8 index fbdddb7b300b..1a47b27d9d65 100644 --- a/sbin/mount_null/mount_null.8 +++ b/sbin/mount_null/mount_null.8 @@ -35,7 +35,7 @@ .\" SUCH DAMAGE. .\" .\" @(#)mount_null.8 8.4 (Berkeley) 4/19/94 -.\" +.\" $Id$ .\" .Dd April 19, 1994 .Dt MOUNT_NULL 8 @@ -195,7 +195,7 @@ by mapping an vnode arguments to the lower layer. The first approach is to call the aliasing layer's bypass routine. This method is most suitable when you wish to invoke the operation currently being handled on the lower layer. It has the advantage -the the bypass routine already must do argument mapping. +the bypass routine already must do argument mapping. An example of this is .Em null_getattrs in the null layer. diff --git a/sbin/mount_nullfs/mount_nullfs.8 b/sbin/mount_nullfs/mount_nullfs.8 index fbdddb7b300b..1a47b27d9d65 100644 --- a/sbin/mount_nullfs/mount_nullfs.8 +++ b/sbin/mount_nullfs/mount_nullfs.8 @@ -35,7 +35,7 @@ .\" SUCH DAMAGE. .\" .\" @(#)mount_null.8 8.4 (Berkeley) 4/19/94 -.\" +.\" $Id$ .\" .Dd April 19, 1994 .Dt MOUNT_NULL 8 @@ -195,7 +195,7 @@ by mapping an vnode arguments to the lower layer. The first approach is to call the aliasing layer's bypass routine. This method is most suitable when you wish to invoke the operation currently being handled on the lower layer. It has the advantage -the the bypass routine already must do argument mapping. +the bypass routine already must do argument mapping. An example of this is .Em null_getattrs in the null layer. diff --git a/sbin/ping/ping.8 b/sbin/ping/ping.8 index b2a6bf749d3b..8ec5bc1fa5b8 100644 --- a/sbin/ping/ping.8 +++ b/sbin/ping/ping.8 @@ -30,6 +30,7 @@ .\" SUCH DAMAGE. .\" .\" @(#)ping.8 8.2 (Berkeley) 12/11/93 +.\" $Id$ .\" .Dd December 11, 1993 .Dt PING 8 @@ -326,7 +327,7 @@ The maximum IP header length is too small for options like .Tn RECORD_ROUTE to be completely useful. -There's not much that that can be done about this, however. +There's not much that can be done about this, however. .Pp Flood pinging is not recommended in general, and flood pinging the broadcast address should only be done under very controlled conditions. diff --git a/usr.bin/cap_mkdb/cap_mkdb.1 b/usr.bin/cap_mkdb/cap_mkdb.1 index b2a39005d064..a98e25a4ed88 100644 --- a/usr.bin/cap_mkdb/cap_mkdb.1 +++ b/usr.bin/cap_mkdb/cap_mkdb.1 @@ -30,6 +30,7 @@ .\" SUCH DAMAGE. .\" .\" @(#)cap_mkdb.1 8.1 (Berkeley) 6/6/93 +.\" $Id$ .\" .Dd "June 6, 1993" .Dt CAP_MKDB 1 @@ -63,7 +64,7 @@ than they can the original text file(s). The ``tc'' capabilities of the records are expanded before the record is stored into the database. .Pp -The options as as follows: +The options as follows: .Bl -tag -width XXXXXX -indent .It Fl f Ar outfile Specify a different database basename. @@ -83,7 +84,7 @@ that couldn't be expanded. .Pp The second type is a key which consists of one of the names from the first capability of the record with a data field consisting a special -byte followed by the the first capability of the record. +byte followed by the first capability of the record. The special byte is a 2. .Pp In normal operation names are looked up in the database, resulting diff --git a/usr.bin/hexdump/hexdump.1 b/usr.bin/hexdump/hexdump.1 index a76d043fa295..1fd6d07c14c1 100644 --- a/usr.bin/hexdump/hexdump.1 +++ b/usr.bin/hexdump/hexdump.1 @@ -30,6 +30,7 @@ .\" SUCH DAMAGE. .\" .\" @(#)hexdump.1 8.2 (Berkeley) 4/18/94 +.\" $Id$ .\" .Dd April 18, 1994 .Dt HEXDUMP 1 @@ -213,7 +214,7 @@ described in the C standard are supported: .Ed .El .Pp -Hexdump also supports the the following additional conversion strings: +Hexdump also supports the following additional conversion strings: .Bl -tag -width Fl .It Cm \&_a Ns Op Cm dox Display the input offset, cumulative across input files, of the diff --git a/usr.bin/ipcs/ipcs.1 b/usr.bin/ipcs/ipcs.1 index a6d0344f7da9..cdc6b4aa276a 100644 --- a/usr.bin/ipcs/ipcs.1 +++ b/usr.bin/ipcs/ipcs.1 @@ -27,7 +27,7 @@ .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" -.\" $Id: ipcs.1,v 1.1 1994/09/13 16:59:28 dfr Exp $ +.\" $Id: ipcs.1,v 1.2 1994/11/19 18:19:27 nate Exp $ .\" .Dd June 18, 1994 .Dt "IPCS" 1 @@ -66,7 +66,7 @@ and shared memory segments. The .Dq maximum allowed size is the maximum number of bytes in a message on a message queue, the size of a shared memory segment, -or the number number of semaphores in a set of semaphores. +or the number of semaphores in a set of semaphores. .It Fl c Show the creator's name and group for active semaphores, message queues, and shared memory segments. diff --git a/usr.bin/make/make.1 b/usr.bin/make/make.1 index 49971b0d7a25..523f34fda58e 100644 --- a/usr.bin/make/make.1 +++ b/usr.bin/make/make.1 @@ -30,6 +30,7 @@ .\" SUCH DAMAGE. .\" .\" @(#)make.1 8.4 (Berkeley) 3/19/94 +.\" $Id$ .\" .Dd March 19, 1994 .Dt MAKE 1 @@ -586,7 +587,7 @@ Test the value of a variable. .Oo \&! Oc Ns Ar target .Op Ar operator target ... .Xc -Test the the target being built. +Test the target being built. .It Xo .Ic .ifnmake .Oo \&! Oc Ar target diff --git a/usr.bin/quota/quota.1 b/usr.bin/quota/quota.1 index 43fb51ff5280..8279d93e26e1 100644 --- a/usr.bin/quota/quota.1 +++ b/usr.bin/quota/quota.1 @@ -33,7 +33,7 @@ .\" SUCH DAMAGE. .\" .\" from: @(#)quota.1 8.1 (Berkeley) 6/6/93 -.\" $Id: quota.1,v 1.4 1994/06/28 07:47:24 deraadt Exp $ +.\" $Id: quota.1,v 1.2 1996/01/05 08:37:28 graichen Exp $ .\" .Dd June 6, 1993 .Dt QUOTA 1 @@ -90,7 +90,7 @@ Only the super-user may use the flag and the optional .Ar user argument to view the limits of other users. -Non-super-users can use the the +Non-super-users can use the .Fl g flag and optional .Ar group diff --git a/usr.bin/ranlib/ranlib.1 b/usr.bin/ranlib/ranlib.1 index c5bdf37a9b4d..bb419d6c5d9d 100644 --- a/usr.bin/ranlib/ranlib.1 +++ b/usr.bin/ranlib/ranlib.1 @@ -30,6 +30,7 @@ .\" SUCH DAMAGE. .\" .\" @(#)ranlib.1 8.1 (Berkeley) 6/6/93 +.\" $Id$ .\" .Dd June 6, 1993 .Dt RANLIB 1 @@ -46,7 +47,7 @@ creates a table of external references for archive libraries, normally used by the loader, .Xr ld 1 . -This table is is named ``__.SYMDEF'' and is prepended to the archive. +This table is named ``__.SYMDEF'' and is prepended to the archive. Files in the archive which are not executable and symbols which are uninteresting to the loader are ignored. .Pp diff --git a/usr.bin/ranlib/ranlib.1aout b/usr.bin/ranlib/ranlib.1aout index c5bdf37a9b4d..bb419d6c5d9d 100644 --- a/usr.bin/ranlib/ranlib.1aout +++ b/usr.bin/ranlib/ranlib.1aout @@ -30,6 +30,7 @@ .\" SUCH DAMAGE. .\" .\" @(#)ranlib.1 8.1 (Berkeley) 6/6/93 +.\" $Id$ .\" .Dd June 6, 1993 .Dt RANLIB 1 @@ -46,7 +47,7 @@ creates a table of external references for archive libraries, normally used by the loader, .Xr ld 1 . -This table is is named ``__.SYMDEF'' and is prepended to the archive. +This table is named ``__.SYMDEF'' and is prepended to the archive. Files in the archive which are not executable and symbols which are uninteresting to the loader are ignored. .Pp diff --git a/usr.bin/sgmls/sgmls/sgmls.1 b/usr.bin/sgmls/sgmls/sgmls.1 index 634601b0aea9..bd92c92e28ff 100644 --- a/usr.bin/sgmls/sgmls/sgmls.1 +++ b/usr.bin/sgmls/sgmls/sgmls.1 @@ -1,3 +1,4 @@ +'\" $Id$ '\" t .\" Uncomment the next line to get a man page accurate for MS-DOS .\"nr Os 1 @@ -247,7 +248,7 @@ sequence of entries in one of the following four forms: .BI PUBLIC\ pubid\ sysid This specifies that .I sysid -should be used as the system identifier if the the public +should be used as the system identifier if the public identifier is .IR pubid . .I Sysid diff --git a/usr.bin/tconv/tconv.1 b/usr.bin/tconv/tconv.1 index 44be7045b79b..d7e122439973 100644 --- a/usr.bin/tconv/tconv.1 +++ b/usr.bin/tconv/tconv.1 @@ -1,4 +1,6 @@ .\" @(#) mytinfo tconv.1 3.2 92/02/01 public domain, By Ross Ridge +.\" $Id$ +.\" .TH TCONV 1 "92/02/01" "mytinfo" .SH NAME tconv \- convert between termcap, terminfo source and terminfo binary @@ -87,7 +89,7 @@ are given the option will be assumed. If the .B \-B -option is used, the compiled output will be put in the the +option is used, the compiled output will be put in the terminfo database, otherwise standard output is used. .PP You cannot translate from terminfo binary to terminfo binary. diff --git a/usr.bin/telnet/telnet.1 b/usr.bin/telnet/telnet.1 index 6bfbd636c9e3..247257f420c4 100644 --- a/usr.bin/telnet/telnet.1 +++ b/usr.bin/telnet/telnet.1 @@ -30,6 +30,7 @@ .\" SUCH DAMAGE. .\" .\" @(#)telnet.1 8.5 (Berkeley) 3/1/94 +.\" $Id$ .\" .Dd March 1, 1994 .Dt TELNET 1 @@ -999,7 +1000,7 @@ commands. The .Ic slc command (Set Local Characters) is used to set -or change the state of the the special +or change the state of the special characters when the .Dv TELNET LINEMODE option has diff --git a/usr.sbin/cdcontrol/cdcontrol.1 b/usr.sbin/cdcontrol/cdcontrol.1 index ff8092a9fa55..29c63cbee5b7 100644 --- a/usr.sbin/cdcontrol/cdcontrol.1 +++ b/usr.sbin/cdcontrol/cdcontrol.1 @@ -1,3 +1,5 @@ +.\" $Id$ +.\" .Dd July 3, 1995 .Dt CDCONTROL 1 .Os FreeBSD @@ -114,7 +116,7 @@ Play the left subtrack on both left and right channels. Play the right subtrack on both left and right channels. .It Cm info -Print the the table of contents. +Print the table of contents. .It Cm status Print the information about the disc: diff --git a/usr.sbin/sa/sa.8 b/usr.sbin/sa/sa.8 index 8a22c0b5e6c4..57d12dcf11d2 100644 --- a/usr.sbin/sa/sa.8 +++ b/usr.sbin/sa/sa.8 @@ -27,7 +27,7 @@ .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" -.\" $Id: sa.8,v 1.2 1994/09/26 21:41:06 davidg Exp $ +.\" $Id: sa.8,v 1.3 1996/04/07 00:05:57 mpp Exp $ .\" .Dd February 25, 1994 .Dt SA 8 @@ -48,7 +48,7 @@ and generally maintains system accounting files. .Pp .Nm Sa -is able to condense the the information in +is able to condense the information in .Pa /var/account/acct into the summary files .Pa /var/account/savacct diff --git a/usr.sbin/xntpd/doc/tickadj.8 b/usr.sbin/xntpd/doc/tickadj.8 index 8726288f837d..4ee458f74131 100644 --- a/usr.sbin/xntpd/doc/tickadj.8 +++ b/usr.sbin/xntpd/doc/tickadj.8 @@ -1,4 +1,4 @@ -''' $Header +''' $Id$ ''' .de Sh .br @@ -70,7 +70,7 @@ which sets the slew rate and resolution used by the system call, and .IR dosynctodr , which indicates to the kernels on some machines whether they should internally -adjust the system clock to keep it in line with with time\-of\-day clock +adjust the system clock to keep it in line with time\-of\-day clock or not. .PP By default, with no arguments, @@ -92,7 +92,7 @@ with Various flags may be specified to change the variables of interest in the running kernel. The .B -a -flag allows one to set the the variable +flag allows one to set the variable .I tickadj to the value specified as an argument. The .B -A diff --git a/usr.sbin/ypbind/ypbind.8 b/usr.sbin/ypbind/ypbind.8 index 2e0d9c13fac2..9d97eefb5d5c 100644 --- a/usr.sbin/ypbind/ypbind.8 +++ b/usr.sbin/ypbind/ypbind.8 @@ -29,7 +29,7 @@ .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" -.\" $Id: ypbind.8,v 1.3 1995/07/20 22:33:02 wpaul Exp $ +.\" $Id: ypbind.8,v 1.4 1996/02/11 22:37:51 mpp Exp $ .\" .Dd April 9, 1995 .Dt YPBIND 8 @@ -110,7 +110,7 @@ The flag allows the system administrator to lock ypbind to a particular domain and group of NIS servers. Up to ten servers can be specified. There must not be any spaces between the commas in the domain/server -specification. This option is used to insure that that the system binds +specification. This option is used to insure that the system binds only to one domain and only to one of the specified servers, which is useful for systems that are both NIS servers and NIS clients: it provides a way to restrict what machines the system can |