diff options
Diffstat (limited to 'contrib/file/install-sh')
| -rwxr-xr-x | contrib/file/install-sh | 750 |
1 files changed, 262 insertions, 488 deletions
diff --git a/contrib/file/install-sh b/contrib/file/install-sh index 377bb8687ffe..b12c0f718920 100755 --- a/contrib/file/install-sh +++ b/contrib/file/install-sh @@ -1,527 +1,301 @@ #!/bin/sh -# install - install a program, script, or datafile - -scriptversion=2011-11-20.07; # UTC - -# This originates from X11R5 (mit/util/scripts/install.sh), which was -# later released in X11R6 (xc/config/util/install.sh) with the -# following copyright and license. -# -# Copyright (C) 1994 X Consortium # -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to -# deal in the Software without restriction, including without limitation the -# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or -# sell copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: +# $NetBSD: install-sh.in,v 1.6 2012/01/11 13:07:31 hans Exp $ +# This script now also installs multiple files, but might choke on installing +# multiple files with spaces in the file names. # -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- -# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -# -# Except as contained in this notice, the name of the X Consortium shall not -# be used in advertising or otherwise to promote the sale, use or other deal- -# ings in this Software without prior written authorization from the X Consor- -# tium. +# install - install a program, script, or datafile +# This comes from X11R5 (mit/util/scripts/install.sh). # +# Copyright 1991 by the Massachusetts Institute of Technology # -# FSF changes to this file are in the public domain. +# Permission to use, copy, modify, distribute, and sell this software and its +# documentation for any purpose is hereby granted without fee, provided that +# the above copyright notice appear in all copies and that both that +# copyright notice and this permission notice appear in supporting +# documentation, and that the name of M.I.T. not be used in advertising or +# publicity pertaining to distribution of the software without specific, +# written prior permission. M.I.T. makes no representations about the +# suitability of this software for any purpose. It is provided "as is" +# without express or implied warranty. # # Calling this script install-sh is preferred over install.sh, to prevent -# 'make' implicit rules from creating a file called install from it +# `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. -nl=' -' -IFS=" "" $nl" - # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. -doit=${DOITPROG-} -if test -z "$doit"; then - doit_exec=exec -else - doit_exec=$doit -fi - -# Put in absolute file names if you don't have them in your path; -# or use environment vars. - -chgrpprog=${CHGRPPROG-chgrp} -chmodprog=${CHMODPROG-chmod} -chownprog=${CHOWNPROG-chown} -cmpprog=${CMPPROG-cmp} -cpprog=${CPPROG-cp} -mkdirprog=${MKDIRPROG-mkdir} -mvprog=${MVPROG-mv} -rmprog=${RMPROG-rm} -stripprog=${STRIPPROG-strip} - -posix_glob='?' -initialize_posix_glob=' - test "$posix_glob" != "?" || { - if (set -f) 2>/dev/null; then - posix_glob= - else - posix_glob=: - fi - } -' - -posix_mkdir= - -# Desired mode of installed file. -mode=0755 - -chgrpcmd= -chmodcmd=$chmodprog -chowncmd= -mvcmd=$mvprog +doit="${DOITPROG-}" + + +# put in absolute paths if you don't have them in your path; or use env. vars. + +awkprog="${AWKPROG-awk}" +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" +mkdirprog="${MKDIRPROG-mkdir}" + +instcmd="$cpprog" +instflags="" +pathcompchmodcmd="$chmodprog 755" +chmodcmd="$chmodprog 755" +chowncmd="" +chgrpcmd="" +stripcmd="" +stripflags="" rmcmd="$rmprog -f" -stripcmd= - -src= -dst= -dir_arg= -dst_arg= - -copy_on_change=false -no_target_directory= - -usage="\ -Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE - or: $0 [OPTION]... SRCFILES... DIRECTORY - or: $0 [OPTION]... -t DIRECTORY SRCFILES... - or: $0 [OPTION]... -d DIRECTORIES... - -In the 1st form, copy SRCFILE to DSTFILE. -In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. -In the 4th, create DIRECTORIES. - -Options: - --help display this help and exit. - --version display version info and exit. - - -c (ignored) - -C install only if different (preserve the last data modification time) - -d create directories instead of installing files. - -g GROUP $chgrpprog installed files to GROUP. - -m MODE $chmodprog installed files to MODE. - -o USER $chownprog installed files to USER. - -s $stripprog installed files. - -t DIRECTORY install into DIRECTORY. - -T report an error if DSTFILE is a directory. +mvcmd="$mvprog" +src="" +msrc="" +dst="" +dir_arg="" +suffix="" +suffixfmt="" + +while [ x"$1" != x ]; do + case $1 in + -b) suffix=".old" + shift + continue;; + + -B) suffixfmt="$2" + shift + shift + continue;; + + -c) instcmd="$cpprog" + shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -m*) + chmodcmd="$chmodprog ${1#-m}" + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + -s) stripcmd="$stripprog" + shift + continue;; + + -S) stripcmd="$stripprog" + stripflags="-S $2 $stripflags" + shift + shift + continue;; + + -p) instflags="-p" + shift + continue;; + + *) if [ x"$msrc" = x ] + then + msrc="$dst" + else + msrc="$msrc $dst" + fi + src="$dst" + dst="$1" + shift + continue;; + esac +done -Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG - RMPROG STRIPPROG -" +if [ x"$dir_arg" = x ] +then + dstisfile="" + if [ ! -d "$dst" ] + then + if [ x"$msrc" = x"$src" ] + then + dstisfile=true + else + echo "install: destination is not a directory" + exit 1 + fi + fi +else + msrc="$msrc $dst" +fi -while test $# -ne 0; do - case $1 in - -c) ;; +if [ x"$msrc" = x ] +then + echo "install: no destination specified" + exit 1 +fi - -C) copy_on_change=true;; +for srcarg in $msrc; do - -d) dir_arg=true;; +if [ x"$dir_arg" != x ]; then - -g) chgrpcmd="$chgrpprog $2" - shift;; + dstarg="$srcarg" +else + dstarg="$dst" + +# Waiting for this to be detected by the "$instcmd $srcarg $dsttmp" command +# might cause directories to be created, which would be especially bad +# if $src (and thus $dsttmp) contains '*'. + + if [ -f "$srcarg" ] + then + doinst="$instcmd $instflags" + elif [ -d "$srcarg" ] + then + echo "install: $srcarg: not a regular file" + exit 1 + elif [ "$srcarg" = "/dev/null" ] + then + doinst="$cpprog" + else + echo "install: $srcarg does not exist" + exit 1 + fi + +# If destination is a directory, append the input filename; if your system +# does not like double slashes in filenames, you may need to add some logic - --help) echo "$usage"; exit $?;; + if [ -d "$dstarg" ] + then + dstarg="$dstarg"/`basename "$srcarg"` + fi +fi - -m) mode=$2 - case $mode in - *' '* | *' '* | *' -'* | *'*'* | *'?'* | *'['*) - echo "$0: invalid mode: $mode" >&2 - exit 1;; - esac - shift;; +## this sed command emulates the dirname command +dstdir=`echo "$dstarg" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` - -o) chowncmd="$chownprog $2" - shift;; +# Make sure that the destination directory exists. +# this part is taken from Noah Friedman's mkinstalldirs script - -s) stripcmd=$stripprog;; +# Skip lots of stat calls in the usual case. +if [ ! -d "$dstdir" ]; then +defaultIFS=' +' +IFS="${IFS-${defaultIFS}}" - -t) dst_arg=$2 - # Protect names problematic for 'test' and other utilities. - case $dst_arg in - -* | [=\(\)!]) dst_arg=./$dst_arg;; - esac - shift;; +oIFS="${IFS}" +# Some sh's can't handle IFS=/ for some reason. +IFS='%' +set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` +IFS="${oIFS}" - -T) no_target_directory=true;; +pathcomp='' - --version) echo "$0 $scriptversion"; exit $?;; +while [ $# -ne 0 ] ; do + pathcomp="${pathcomp}${1}" + shift - --) shift - break;; + if [ ! -d "${pathcomp}" ] ; + then + $doit $mkdirprog "${pathcomp}" + if [ x"$chowncmd" != x ]; then $doit $chowncmd "${pathcomp}"; else true ; fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "${pathcomp}"; else true ; fi && + if [ x"$pathcompchmodcmd" != x ]; then $doit $pathcompchmodcmd "${pathcomp}"; else true ; fi - -*) echo "$0: invalid option: $1" >&2 - exit 1;; + else + true + fi - *) break;; - esac - shift + pathcomp="${pathcomp}/" done - -if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then - # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dst_arg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dst_arg" - shift # fnord - fi - shift # arg - dst_arg=$arg - # Protect names problematic for 'test' and other utilities. - case $dst_arg in - -* | [=\(\)!]) dst_arg=./$dst_arg;; - esac - done fi -if test $# -eq 0; then - if test -z "$dir_arg"; then - echo "$0: no input file specified." >&2 - exit 1 - fi - # It's OK to call 'install-sh -d' without argument. - # This can happen when creating conditional directories. - exit 0 -fi - -if test -z "$dir_arg"; then - do_exit='(exit $ret); exit $ret' - trap "ret=129; $do_exit" 1 - trap "ret=130; $do_exit" 2 - trap "ret=141; $do_exit" 13 - trap "ret=143; $do_exit" 15 - - # Set umask so as not to create temps with too-generous modes. - # However, 'strip' requires both read and write access to temps. - case $mode in - # Optimize common cases. - *644) cp_umask=133;; - *755) cp_umask=22;; - - *[0-7]) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw='% 200' - fi - cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; - *) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw=,u+rw - fi - cp_umask=$mode$u_plus_rw;; - esac -fi - -for src -do - # Protect names problematic for 'test' and other utilities. - case $src in - -* | [=\(\)!]) src=./$src;; - esac - - if test -n "$dir_arg"; then - dst=$src - dstdir=$dst - test -d "$dstdir" - dstdir_status=$? - else - - # Waiting for this to be detected by the "$cpprog $src $dsttmp" command - # might cause directories to be created, which would be especially bad - # if $src (and thus $dsttmp) contains '*'. - if test ! -f "$src" && test ! -d "$src"; then - echo "$0: $src does not exist." >&2 - exit 1 - fi - - if test -z "$dst_arg"; then - echo "$0: no destination specified." >&2 - exit 1 - fi - dst=$dst_arg - - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. - if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dst_arg: Is a directory" >&2 - exit 1 - fi - dstdir=$dst - dst=$dstdir/`basename "$src"` - dstdir_status=0 - else - # Prefer dirname, but fall back on a substitute if dirname fails. - dstdir=` - (dirname "$dst") 2>/dev/null || - expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$dst" : 'X\(//\)[^/]' \| \ - X"$dst" : 'X\(//\)$' \| \ - X"$dst" : 'X\(/\)' \| . 2>/dev/null || - echo X"$dst" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q' - ` - - test -d "$dstdir" - dstdir_status=$? - fi - fi - - obsolete_mkdir_used=false - - if test $dstdir_status != 0; then - case $posix_mkdir in - '') - # Create intermediate dirs using mode 755 as modified by the umask. - # This is like FreeBSD 'install' as of 1997-10-28. - umask=`umask` - case $stripcmd.$umask in - # Optimize common cases. - *[2367][2367]) mkdir_umask=$umask;; - .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - - *[0-7]) - mkdir_umask=`expr $umask + 22 \ - - $umask % 100 % 40 + $umask % 20 \ - - $umask % 10 % 4 + $umask % 2 - `;; - *) mkdir_umask=$umask,go-w;; - esac - - # With -d, create the new directory with the user-specified mode. - # Otherwise, rely on $mkdir_umask. - if test -n "$dir_arg"; then - mkdir_mode=-m$mode + if [ x"$dir_arg" != x ] + then + if [ -d "$dstarg" ]; then + true + else + $doit $mkdirprog "$dstarg" && + + if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dstarg"; else true ; fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dstarg"; else true ; fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dstarg"; else true ; fi + fi else - mkdir_mode= + + if [ x"$dstisfile" = x ] + then + file=$srcarg + else + file=$dst + fi + + dstfile=`basename "$file"` + dstfinal="$dstdir/$dstfile" + +# Make a temp file name in the proper directory. + + dsttmp=$dstdir/#inst.$$# + +# Make a backup file name in the proper directory. + case x$suffixfmt in + *%*) suffix=`echo x | + $awkprog -v bname="$dstfinal" -v fmt="$suffixfmt" ' + { cnt = 0; + do { + sfx = sprintf(fmt, cnt++); + name = bname sfx; + } while (system("test -f " name) == 0); + print sfx; }' -`;; + x) ;; + *) suffix="$suffixfmt";; + esac + dstbackup="$dstfinal$suffix" + +# Move or copy the file name to the temp name + + $doit $doinst $srcarg "$dsttmp" && + + trap "rm -f ${dsttmp}" 0 && + +# and set any options; do chmod last to preserve setuid bits + +# If any of these fail, we abort the whole thing. If we want to +# ignore errors from any of these, just make sure not to ignore +# errors from the above "$doit $instcmd $src $dsttmp" command. + + if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else true;fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else true;fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $stripflags "$dsttmp"; else true;fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else true;fi && + +# Now rename the file to the real destination. + + if [ x"$suffix" != x ] && [ -f "$dstfinal" ] + then + $doit $mvcmd "$dstfinal" "$dstbackup" + else + $doit $rmcmd -f "$dstfinal" + fi && + $doit $mvcmd "$dsttmp" "$dstfinal" fi - posix_mkdir=false - case $umask in - *[123567][0-7][0-7]) - # POSIX mkdir -p sets u+wx bits regardless of umask, which - # is incompatible with FreeBSD 'install' when (umask & 300) != 0. - ;; - *) - tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 - - if (umask $mkdir_umask && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 - then - if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. - # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writable bit of parent directory when it shouldn't. - # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - ls_ld_tmpdir=`ls -ld "$tmpdir"` - case $ls_ld_tmpdir in - d????-?r-*) different_mode=700;; - d????-?--*) different_mode=755;; - *) false;; - esac && - $mkdirprog -m$different_mode -p -- "$tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$tmpdir"` - test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" - } - } - then posix_mkdir=: - fi - rmdir "$tmpdir/d" "$tmpdir" - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null - fi - trap '' 0;; - esac;; - esac +done && - if - $posix_mkdir && ( - umask $mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" - ) - then : - else - - # The umask is ridiculous, or mkdir does not conform to POSIX, - # or it failed possibly due to a race condition. Create the - # directory the slow way, step by step, checking for races as we go. - - case $dstdir in - /*) prefix='/';; - [-=\(\)!]*) prefix='./';; - *) prefix='';; - esac - - eval "$initialize_posix_glob" - - oIFS=$IFS - IFS=/ - $posix_glob set -f - set fnord $dstdir - shift - $posix_glob set +f - IFS=$oIFS - - prefixes= - - for d - do - test X"$d" = X && continue - - prefix=$prefix$d - if test -d "$prefix"; then - prefixes= - else - if $posix_mkdir; then - (umask=$mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break - # Don't fail if two instances are running concurrently. - test -d "$prefix" || exit 1 - else - case $prefix in - *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; - *) qprefix=$prefix;; - esac - prefixes="$prefixes '$qprefix'" - fi - fi - prefix=$prefix/ - done - - if test -n "$prefixes"; then - # Don't fail if two instances are running concurrently. - (umask $mkdir_umask && - eval "\$doit_exec \$mkdirprog $prefixes") || - test -d "$dstdir" || exit 1 - obsolete_mkdir_used=true - fi - fi - fi - - if test -n "$dir_arg"; then - { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && - { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || - test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 - else - - # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - - # Trap to clean up those temp files at exit. - trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - - # Copy the file name to the temp name. - (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && - - # and set any options; do chmod last to preserve setuid bits. - # - # If any of these fail, we abort the whole thing. If we want to - # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $cpprog $src $dsttmp" command. - # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && - { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && - { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && - - # If -C, don't bother to copy if it wouldn't change the file. - if $copy_on_change && - old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && - new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && - - eval "$initialize_posix_glob" && - $posix_glob set -f && - set X $old && old=:$2:$4:$5:$6 && - set X $new && new=:$2:$4:$5:$6 && - $posix_glob set +f && - - test "$old" = "$new" && - $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 - then - rm -f "$dsttmp" - else - # Rename the file to the real destination. - $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || - - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - { - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - test ! -f "$dst" || - $doit $rmcmd -f "$dst" 2>/dev/null || - { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && - { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } - } || - { echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" - } - fi || exit 1 - - trap '' 0 - fi -done -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: +exit 0 |