diff options
Diffstat (limited to 'libexec/rc/rc.conf')
| -rw-r--r-- | libexec/rc/rc.conf | 793 |
1 files changed, 793 insertions, 0 deletions
diff --git a/libexec/rc/rc.conf b/libexec/rc/rc.conf new file mode 100644 index 000000000000..b7cce777c4f6 --- /dev/null +++ b/libexec/rc/rc.conf @@ -0,0 +1,793 @@ +#!/bin/sh + +# This is rc.conf - a file full of useful variables that you can set +# to change the default startup behavior of your system. You should +# not edit this file! Put any overrides into one of the ${rc_conf_files} +# instead and you will be able to update these defaults later without +# spamming your local configuration information. +# +# The ${rc_conf_files} files should only contain values which override +# values set in this file. This eases the upgrade path when defaults +# are changed and new features are added. +# +# All arguments must be in double or single quotes. +# +# For a more detailed explanation of all the rc.conf variables, please +# refer to the rc.conf(5) manual page. +# + +############################################################## +### Important initial Boot-time options #################### +############################################################## + +# Set default value of _localbase if not previously set +: ${_localbase:="$(/sbin/sysctl -n user.localbase 2> /dev/null)"} +: ${_localbase:="/usr/local"} + +# rc_debug can't be set here without interferring with rc.subr's setting it +# when the kenv variable rc.debug is set. +#rc_debug="NO" # Set to YES to enable debugging output from rc.d +rc_info="NO" # Enables display of informational messages at boot. +rc_startmsgs="YES" # Show "Starting foo:" messages at boot +rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown +precious_machine="NO" # Set to YES to get some guards against mis-directed + # shutdown(8) commands +early_late_divider="FILESYSTEMS" # Script that separates early/late + # stages of the boot process. Make sure you know + # the ramifications if you change this. + # See rc.conf(5) for more details. +always_force_depends="NO" # Set to check that indicated dependencies are + # running during boot (can increase boot time). + +apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). +apmd_enable="NO" # Run apmd to handle APM event from userland. +apmd_flags="" # Flags to apmd (if enabled). +ddb_enable="NO" # Set to YES to load ddb scripts at boot. +ddb_config="/etc/ddb.conf" # ddb(8) config file. +devd_enable="YES" # Run devd, to trigger programs on device tree changes. +devd_flags="" # Additional flags for devd(8). +devmatch_enable="YES" # Demand load kernel modules based on device ids. +devmatch_blocklist="" # List of modules (w/o .ko) to exclude from devmatch. +#kld_list="" # Kernel modules to load after local disks are mounted +kldxref_enable="YES" # Build linker.hints files with kldxref(8). +kldxref_clobber="NO" # Overwrite old linker.hints at boot. +kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. +powerd_enable="NO" # Run powerd to lower our power usage. +powerd_flags="" # Flags to powerd (if enabled). +tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never +tmpsize="20m" # Size of mfs /tmp if created +tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp +utx_enable="YES" # Enable user accounting +varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never +varsize="32m" # Size of mfs /var if created +varmfs_flags="-S" # Extra mount options for the mfs /var +mfs_type="auto" # "md", "tmpfs", "auto" to prefer tmpfs with md as fallback +populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never +cleanvar_enable="YES" # Clean the /var directory +var_run_enable="YES" # Save/restore /var/run structure at shutdown/reboot +var_run_autosave="YES" # Only restore /var/run structure at shutdown/reboot + # The user is expected to issue service var_run save to + # manually save the /var/run mtree +var_run_mtree="/var/db/mtree/BSD.var-run.mtree" + # Where to save /var/run mtree +local_startup="${_localbase}/etc/rc.d" # startup script dirs. +script_name_sep=" " # Change if your startup scripts' names contain spaces +rc_conf_files="/etc/rc.conf /etc/rc.conf.local" + +# ZFS support +zfs_enable="NO" # Set to YES to automatically mount ZFS file systems +zfskeys_enable="NO" # Set YES to autoload ZFS encryption keys +zfs_bootonce_activate="NO" # Set YES to make successful bootonce BE permanent +zpool_reguid="" # Set to zpools for which the GUID should be replaced + # upon first boot. +zpool_upgrade="" # Set to zpools for which the version should be upgraded + # upon first boot. + +# ZFSD support +zfsd_enable="NO" # Set to YES to automatically start the ZFS fault + # management daemon. + +gptboot_enable="YES" # GPT boot success/failure reporting. + +# GELI disk encryption configuration. +geli_devices="" # List of devices to automatically attach in addition to + # GELI devices listed in /etc/fstab. +geli_groups="" # List of groups containing devices to automatically + # attach with the same keyfiles and passphrase +geli_tries="" # Number of times to attempt attaching geli device. + # If empty, kern.geom.eli.tries will be used. +geli_default_flags="" # Default flags for geli(8). +geli_autodetach="YES" # Automatically detach on last close. + # Providers are marked as such when all file systems are + # mounted. +# Example use. +#geli_devices="da1 mirror/home" +#geli_da1_flags="-p -k /etc/geli/da1.keys" +#geli_da1_autodetach="NO" +#geli_mirror_home_flags="-k /etc/geli/home.keys" +#geli_groups="storage backup" +#geli_storage_flags="-k /etc/geli/storage.keys" +#geli_storage_devices="ada0 ada1" +#geli_backup_flags="-j /etc/geli/backup.passfile -k /etc/geli/backup.keys" +#geli_backup_devices="ada2 ada3" + +root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. +root_hold_delay="30" # Time to wait for root mount hold release. +fsck_flags="-p" # May be changed to -f (or -f -y) to force a full fsck +fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. +fsck_y_flags="-T ffs:-R -T ufs:-R" # Additional flags for fsck -y +background_fsck="YES" # Attempt to run fsck in the background where possible. +background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. +growfs_enable="NO" # Set to YES to attempt to grow the root filesystem on boot +growfs_swap_size="" # Set to 0 to disable growfs swap, "" to default size, + # size in bytes to specify swap size. +netfs_types="nfs:NFS smbfs:SMB" # Net filesystems. +extra_netfs_types="NO" # List of network extra filesystem types for delayed + # mount at startup (or NO). + +############################################################## +### Network configuration sub-section ###################### +############################################################## + +### Basic network and firewall/security options: ### +hostname="" # Set this! +hostid_enable="YES" # Set host UUID. +hostid_file="/etc/hostid" # File with hostuuid. +hostid_uuidgen_flags="-r" # Flags to uuidgen. +machine_id_file="/etc/machine-id" # File with machine-id. +nisdomainname="NO" # Set to NIS domain if using NIS (or NO). +dhclient_program="/sbin/dhclient" # Path to dhcp client program. +dhclient_flags="" # Extra flags to pass to dhcp client. +#dhclient_flags_em0="" # Extra dhclient flags for em0 only +background_dhclient="NO" # Start dhcp client in the background. +#background_dhclient_em0="YES" # Start dhcp client on em0 in the background. +dhclient_arpwait="YES" # Wait for ARP resolution +synchronous_dhclient="NO" # Start dhclient directly on configured + # interfaces during startup. +defaultroute_delay="30" # Time to wait for a default route on a DHCP interface. +defaultroute_carrier_delay="5" # Time to wait for carrier while waiting for a default route. +netif_enable="YES" # Set to YES to initialize network interfaces +netif_ipexpand_max="2048" # Maximum number of IP addrs in a range spec. +wpa_supplicant_program="/usr/sbin/wpa_supplicant" +wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant +wpa_supplicant_conf_file="/etc/wpa_supplicant.conf" +# +firewall_enable="NO" # Set to YES to enable firewall functionality +firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall +firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) +firewall_quiet="NO" # Set to YES to suppress rule display +firewall_logging="NO" # Set to YES to enable events logging +firewall_logif="NO" # Set to YES to create logging-pseudo interface +firewall_flags="" # Flags passed to ipfw when type is a file +firewall_coscripts="" # List of executables/scripts to run after + # firewall starts/stops +firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client" + # firewall. +#firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for + # "client" firewall. +firewall_simple_iif="em1" # Inside network interface for "simple" + # firewall. +firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple" + # firewall. +firewall_simple_oif="em0" # Outside network interface for "simple" + # firewall. +firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple" + # firewall. +#firewall_simple_iif_ipv6="em1" # Inside IPv6 network interface for "simple" + # firewall. +#firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix + # for "simple" firewall. +#firewall_simple_oif_ipv6="em0" # Outside IPv6 network interface for "simple" + # firewall. +#firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix + # for "simple" firewall. +firewall_myservices="" # List of ports/protocols on which this host + # offers services for "workstation" firewall. +firewall_allowservices="" # List of IPs which have access to + # $firewall_myservices for "workstation" + # firewall. +firewall_trusted="" # List of IPs which have full access to this + # host for "workstation" firewall. +firewall_logdeny="NO" # Set to YES to log default denied incoming + # packets for "workstation" firewall. +firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports + # for which denied incoming packets are not + # logged for "workstation" firewall. +firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES) +firewall_nat_interface="" # Public interface or IPaddress to use +firewall_nat_flags="" # Additional configuration parameters +firewall_nat64_enable="NO" # Enable kernel NAT64 module. +firewall_nptv6_enable="NO" # Enable kernel NPTv6 module. +firewall_pmod_enable="NO" # Enable kernel protocols modification module. +dummynet_enable="NO" # Load the dummynet(4) module +ipfw_netflow_enable="NO" # Enable netflow logging via ng_netflow +ip_portrange_first="NO" # Set first dynamically allocated port +ip_portrange_last="NO" # Set last dynamically allocated port +ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) +ike_program="${_localbase}/sbin/isakmpd" # Path to IKE daemon +ike_flags="" # Additional flags for IKE daemon +ipsec_enable="NO" # Set to YES to run setkey on ipsec_file +ipsec_file="/etc/ipsec.conf" # Name of config file for setkey +natd_program="/sbin/natd" # path to natd, if you want a different one. +natd_enable="NO" # Enable natd (if firewall_enable == YES). +natd_interface="" # Public interface or IPaddress to use. +natd_flags="" # Additional flags for natd. +ipfilter_enable="NO" # Set to YES to enable ipfilter functionality +ipfilter_program="/sbin/ipf" # where the ipfilter program lives +ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see + # /usr/src/share/examples/ipfilter for examples +ipfilter_flags="" # additional flags for ipfilter +ipfilter_optionlist="" # optionlist for ipf(8) -T +ippool_enable="NO" # Set to YES to enable ip filter pools +ippool_program="/sbin/ippool" # where the ippool program lives +ippool_rules="/etc/ippool.tables" # rules definition file for ippool +ippool_flags="" # additional flags for ippool +ipnat_enable="NO" # Set to YES to enable ipnat functionality +ipnat_program="/sbin/ipnat" # where the ipnat program lives +ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat +ipnat_flags="" # additional flags for ipnat +ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat +ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives +ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" +ipfs_enable="NO" # Set to YES to enable saving and restoring + # of state tables at shutdown and boot +ipfs_program="/sbin/ipfs" # where the ipfs program lives +ipfs_flags="" # additional flags for ipfs +pf_enable="NO" # Set to YES to enable packet filter (pf) +pf_rules="/etc/pf.conf" # rules definition file for pf (nonexistent + # by default) +pf_program="/sbin/pfctl" # where the pfctl program lives +pf_flags="" # additional flags for pfctl +pf_fallback_rules_enable="NO" # fallback if loading ruleset fails +pf_fallback_rules="block drop log all" # rules to load on pf ruleset failure +#pf_fallback_rules="block drop log all +#pass quick on em4" # multi-rule +pf_fallback_rules_file="/etc/pf-fallback.conf" # rules file on ruleset failure +pflog_enable="NO" # Set to YES to enable packet filter logging +pflog_logfile="/var/log/pflog" # where pflogd should store the logfile +pflog_program="/sbin/pflogd" # where the pflogd program lives +pflog_flags="" # additional flags for pflogd +dnctl_enable="NO" +dnctl_program="/sbin/dnctl" +dnctl_rules="/etc/dnctl.conf" +ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf +ftpproxy_flags="" # additional flags for ftp-proxy(8) +pfsync_enable="NO" # Expose pf state to other hosts for syncing +pfsync_syncdev="" # Interface for pfsync to work through +pfsync_syncpeer="" # IP address of pfsync peer host +pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync +tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. +log_in_vain="0" # >=1 to log connects to ports w/o listeners. +tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). +tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN + # NOTE: this violates the TCP specification +icmp_drop_redirect="auto" # Set to YES to ignore ICMP REDIRECT packets +icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets +network_interfaces="auto" # List of network interfaces (or "auto"). +cloned_interfaces="" # List of cloned network interfaces to create. +#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. +#ifconfig_lo0="inet 127.0.0.1/8" # default loopback device configuration. +#ifconfig_lo0_alias0="inet 127.0.0.254/32" # Sample alias entry. +#ifconfig_em0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry +#ifconfig_em0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias +#ifconfig_em0_name="net0" # Change interface name from em0 to net0. +#vlans_em0="101 vlan0" # vlan(4) interfaces for em0 device +#create_args_vlan0="vlan 102" # vlan tag for vlan0 device +#wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device +#wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlandebug(8) +#ipv4_addrs_em0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. +# +#autobridge_interfaces="bridge0" # List of bridges to check +#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge + +# User ppp configuration. +ppp_enable="NO" # Start user-ppp (or NO). +ppp_program="/usr/sbin/ppp" # Path to user-ppp program. +ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". + # For details see man page for ppp(8). Default is auto. +ppp_nat="YES" # Use PPP's internal network address translation or NO. +ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. +ppp_user="root" # Which user to run ppp as + +# Start multiple instances of ppp at boot time +#ppp_profile="profile1 profile2 profile3" # Which profiles to use +#ppp_profile1_mode="ddial" # Override ppp mode for profile1 +#ppp_profile2_nat="NO" # Override nat mode for profile2 +# profile3 uses default ppp_mode and ppp_nat + +### Network daemon (miscellaneous) ### +hostapd_program="/usr/sbin/hostapd" +hostapd_enable="NO" # Run hostap daemon. +syslogd_enable="YES" # Run syslog daemon (or NO). +syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. +syslogd_flags="-s" # Flags to syslogd (if enabled). +syslogd_oomprotect="YES" # Don't kill syslogd when swap space is exhausted. +altlog_proglist="" # List of chrooted applicatioins in /var +inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). +inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. +inetd_flags="-wW -C 60" # Optional flags to inetd +iscsid_enable="NO" # iSCSI initiator daemon. +iscsictl_enable="NO" # iSCSI initiator autostart. +iscsictl_flags="-Aa" # Optional flags to iscsictl. +hastd_enable="NO" # Run the HAST daemon (YES/NO). +hastd_program="/sbin/hastd" # path to hastd, if you want a different one. +hastd_flags="" # Optional flags to hastd. +ggated_enable="NO" # Run the ggate daemon (YES/NO). +ggated_config="/etc/gg.exports" # ggated(8) exports file. +ggated_flags="" # Extra parameters like which port to bind to. +ctld_enable="NO" # CAM Target Layer / iSCSI target daemon. +local_unbound_enable="NO" # Local caching DNS resolver +local_unbound_oomprotect="YES" # Don't kill local_unbound when swap space is exhausted. +local_unbound_tls="NO" # Use DNS over TLS +blacklistd_enable="NO" # Renamed to blocklistd_enable. +blacklistd_flags="" # Renamed to blocklistd_flags. +blocklistd_enable="NO" # Run blocklistd daemon (YES/NO). +blocklistd_flags="" # Optional flags for blocklistd(8). +resolv_enable="YES" # Enable resolv / resolvconf + +# +# kerberos. Do not run the admin daemons on slave servers +# +kdc_enable="NO" # Run a kerberos 5 KDC (or NO). +kdc_program="" # path to kerberos 5 KDC +kdc_flags="" # Additional flags to the kerberos 5 KDC +kdc_restart="NO" # Auto restart kdc on abnormal termination +kdc_restart_delay="" # Auto restart delay seconds +kadmind_enable="NO" # Run kadmind (or NO) +kadmind_program="/usr/libexec/kadmind" # path to kadmind +kpasswdd_enable="NO" # Run kpasswdd (or NO) +kpasswdd_program="/usr/libexec/kpasswdd" # path to kpasswdd +kfd_enable="NO" # Run kfd (or NO) +kfd_program="/usr/libexec/kfd" # path to kerberos 5 kfd daemon +kfd_flags="" +ipropd_master_enable="NO" # Run Heimdal incremental propagation daemon + # (master daemon). +ipropd_master_program="/usr/libexec/ipropd-master" +ipropd_master_flags="" # Flags to ipropd-master. +ipropd_master_keytab="/etc/krb5.keytab" # keytab for ipropd-master. +ipropd_master_slaves="" # slave node names used for /var/heimdal/slaves. +ipropd_slave_enable="NO" # Run Heimdal incremental propagation daemon + # (slave daemon). +ipropd_slave_program="/usr/libexec/ipropd-slave" +ipropd_slave_flags="" # Flags to ipropd-slave. +ipropd_slave_keytab="/etc/krb5.keytab" # keytab for ipropd-slave. +ipropd_slave_master="" # master node name. + +gssd_enable="NO" # Run the gssd daemon (or NO). +gssd_program="/usr/sbin/gssd" # Path to gssd. +gssd_flags="" # Flags for gssd. + +rwhod_enable="NO" # Run the rwho daemon (or NO). +rwhod_flags="" # Flags for rwhod +rarpd_enable="NO" # Run rarpd (or NO). +rarpd_flags="-a" # Flags to rarpd. +bootparamd_enable="NO" # Run bootparamd (or NO). +bootparamd_flags="" # Flags to bootparamd +pppoed_enable="NO" # Run the PPP over Ethernet daemon. +pppoed_provider="*" # Provider and ppp(8) config file entry. +pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). +pppoed_interface="em0" # The interface that pppoed runs on. +sshd_enable="NO" # Enable sshd +sshd_oomprotect="YES" # Don't kill sshd when swap space is exhausted. +sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. +sshd_flags="" # Additional flags for sshd. + +### Network daemon (NFS): All need rpcbind_enable="YES" ### +autofs_enable="NO" # Run autofs daemons. +automount_flags="" # Flags to automount(8) (if autofs enabled). +automountd_flags="" # Flags to automountd(8) (if autofs enabled). +autounmountd_flags="" # Flags to autounmountd(8) (if autofs enabled). +nfs_client_enable="NO" # This host is an NFS client (or NO). +nfs_access_cache="60" # Client cache timeout in seconds +nfs_server_enable="NO" # This host is an NFS server (or NO). +nfs_server_flags="-u -t" # Flags to nfsd (if enabled). +nfs_server_managegids="NO" # The NFS server maps gids for AUTH_SYS (or NO). +nfs_server_maxio="131072" # Maximum I/O size for the nfsd. +mountd_enable="NO" # Run mountd (or NO). +mountd_flags="-r -S" # Flags to mountd (if NFS server enabled). +weak_mountd_authentication="NO" # Allow non-root mount requests to be served. +nfs_reserved_port_only="YES" # Provide NFS only on secure port (or NO). +nfs_bufpackets="" # bufspace (in packets) for client +rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. +rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). +rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. +rpc_statd_flags="" # Flags to rpc.statd (if enabled). +rpcbind_enable="NO" # Run the portmapper service (YES/NO). +rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. +rpcbind_flags="" # Flags to rpcbind (if enabled). +rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). +nfsv4_server_enable="NO" # Enable support for NFSv4 +nfsv4_server_only="NO" # Set NFS server to NFSv4 only +nfscbd_enable="NO" # NFSv4 client side callback daemon +nfscbd_flags="" # Flags for nfscbd +nfsuserd_enable="NO" # NFSv4 user/group name mapping daemon +nfsuserd_flags="" # Flags for nfsuserd +tlsclntd_enable="NO" # Run rpc.tlsclntd needed for NFS-over-TLS mount +tlsclntd_flags="" # Flags for rpc.tlsclntd +tlsservd_enable="NO" # Run rpc.tlsservd needed for NFS-over-TLS nfsd +tlsservd_flags="" # Flags for rpc.tlsservd + +### Network Time Services options: ### +ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). +ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. +ntpdate_flags="-b" # Flags to ntpdate (if enabled). +ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file +ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers. +ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). +ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. +ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file +ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high +ntpd_flags="" # Additional flags to ntpd +ntp_src_leapfile="/etc/ntp/leap-seconds" + # Initial source for ntpd leapfile +ntp_db_leapfile="/var/db/ntpd.leap-seconds.list" + # Canonical place to get the leap seconds from +ntp_leapfile_sources="https://hpiers.obspm.fr/iers/bul/bulc/ntp/leap-seconds.list https://data.iana.org/time-zones/tzdb/leap-seconds.list" + # Source from which to fetch leapfile +ntp_leapfile_fetch_opts="-mq" # Options to use for ntp leapfile fetch, + # e.g. --no-verify-peer +ntp_leapfile_expiry_days=30 # Check for new leapfile 30 days prior to + # expiry. +ntp_leapfile_fetch_verbose="NO" # Be verbose during NTP leapfile fetch + +# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### +nis_client_enable="NO" # We're an NIS client (or NO). +nis_client_flags="" # Flags to ypbind (if enabled). +nis_ypset_enable="NO" # Run ypset at boot time (or NO). +nis_ypset_flags="" # Flags to ypset (if enabled). +nis_server_enable="NO" # We're an NIS server (or NO). +nis_server_flags="" # Flags to ypserv (if enabled). +nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). +nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). +nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). +nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). +nis_ypldap_enable="NO" # Run ypldap at boot time (or NO). +nis_ypldap_flags="" # Flags to ypldap (if enabled). + +### SNMP daemon ### +# Be sure to understand the security implications of running SNMP v1/v2 +# in your network. +bsnmpd_enable="NO" # Run the SNMP daemon (or NO). +bsnmpd_flags="" # Flags for bsnmpd. + +### Network routing options: ### +defaultrouter="NO" # Set to default gateway (or NO). +#defaultrouter_fibN="192.0.2.1" # Use this form to set a gateway for FIB N +static_arp_pairs="" # Set to static ARP list (or leave empty). +static_ndp_pairs="" # Set to static NDP list (or leave empty). +static_routes="" # Set to static route list (or leave empty). +gateway_enable="NO" # Set to YES if this host will be a gateway. +routed_enable="NO" # Set to YES to enable a routing daemon. +routed_program="/sbin/routed" # Name of routing daemon to use if enabled. +routed_flags="-q" # Flags for routing daemon. +arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. +forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") +accept_sourceroute="NO" # accept source routed packets to us + +### Bluetooth ### +hcsecd_enable="NO" # Enable hcsecd(8) (or NO) +hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file + +sdpd_enable="NO" # Enable sdpd(8) (or NO) +sdpd_control="/var/run/sdp" # sdpd(8) control socket +sdpd_groupname="nobody" # set spdp(8) user/group to run as after +sdpd_username="nobody" # it initializes + +bthidd_enable="NO" # Enable bthidd(8) (or NO) +bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file +bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file +bthidd_evdev_support="AUTO" # AUTO depends on EVDEV_SUPPORT kernel option + +rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO) +rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf +# +#rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one' +rfcomm_pppd_server_one_channel="1" # Override local channel for 'one' +#rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register +#rfcomm_pppd_server_one_register_dun="NO" # for 'one' +# +#rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two' +rfcomm_pppd_server_two_channel="3" # Override local channel for 'two' +#rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register +#rfcomm_pppd_server_two_register_dun="NO" # for 'two' + +ubthidhci_enable="NO" # Switch an USB BT controller present on +#ubthidhci_busnum="3" # bus 3 and addr 2 from HID mode to HCI mode. +#ubthidhci_addr="2" # Check usbconfig list to find the correct + # numbers for your system. + +### Network link/usability verification options +netwait_enable="NO" # Enable rc.d/netwait (or NO) +#netwait_ip="" # Wait for ping response from any IP in this list. +netwait_timeout="60" # Total number of seconds to perform pings. +#netwait_if="" # Wait for active link on each intf in this list. +netwait_if_timeout="30" # Total number of seconds to monitor link state. +netwait_dad="NO" # Wait for DAD to complete +netwait_dad_timeout="" # Total number of seconds to wait for DAD, zero + # or unset to autodetect + +### Miscellaneous network options: ### +icmp_bmcastecho="NO" # respond to broadcast ping packets + +### IPv6 options: ### +ipv6_network_interfaces="auto" # List of IPv6 network interfaces + # (or "auto" or "none"). +ipv6_activate_all_interfaces="NO" # If NO, interfaces which have no + # corresponding $ifconfig_IF_ipv6 is + # marked as IFDISABLED for security + # reason. +ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). +#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) +#ipv6_defaultrouter_fibN="2001:db8::" # Use this form to set a gateway for FIB N +ipv6_static_routes="" # Set to static route list (or leave empty). +#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 + # route toward loopback interface. +#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" +ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. +ipv6_cpe_wanif="NO" # Set to the upstream interface name if this + # node will work as a router to forward IPv6 + # packets not explicitly addressed to itself. +ipv6_privacy="NO" # Use privacy address on RA-receiving IFs + # (RFC 4941) + +route6d_enable="NO" # Set to YES to enable an IPv6 routing daemon. +route6d_program="/usr/sbin/route6d" # Name of IPv6 routing daemon. +route6d_flags="" # Flags to IPv6 routing daemon. +#route6d_flags="-l" # Example for route6d with only IPv6 site local + # addrs. +#route6d_flags="-q" # If you want to run a routing daemon on an end + # node, you should stop advertisement. +#ipv6_network_interfaces="em0 em1" # Examples for router + # or static configuration for end node. + # Choose correct prefix value. +#ipv6_prefix_em0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. +#ipv6_prefix_em1="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. +ipv6_default_interface="NO" # Default output interface for scoped addrs. + # This works only with + # ipv6_gateway_enable="NO". +rtsol_flags="-i" # Flags to IPv6 router solicitation. +rtsold_enable="NO" # Set to YES to enable an IPv6 router + # solicitation daemon. +rtsold_flags="-a -i" # Flags to an IPv6 router solicitation + # daemon. +rtadvd_enable="NO" # Set to YES to enable an IPv6 router + # advertisement daemon. If set to YES, + # this router becomes a possible candidate + # IPv6 default router for local subnets. +rtadvd_flags="" # Flags to the IPv6 router advertisement daemon. +rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. +stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 + # tunneling interface. Specify this entry + # to enable 6to4 interface. +stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, + # to limit peer addr range. Effective value + # is 0-31. +stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. + # If you like, you can set "AUTO" for this. +stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 +ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr + # communication. (like ::ffff:a.b.c.d) +ip6addrctl_enable="YES" # Set to YES to enable default address selection +ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages +ip6addrctl_policy="AUTO" # A pre-defined address selection policy + # (ipv4_prefer, ipv6_prefer, or AUTO) + +############################################################## +### System console options ################################# +############################################################## + +keyboard="" # keyboard device to use (default /dev/kbd0). +keymap="NO" # keymap in /usr/share/{syscons,vt}/keymaps/* (or NO). +keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). +keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. +keychange="NO" # function keys default values (or NO). +cursor="NO" # cursor type {normal|blink|destructive} (or NO). +scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). +font8x16="NO" # font 8x16 from /usr/share/{syscons,vt}/fonts/* (or NO). +font8x14="NO" # font 8x14 from /usr/share/{syscons,vt}/fonts/* (or NO). +font8x8="NO" # font 8x8 from /usr/share/{syscons,vt}/fonts/* (or NO). +blanktime="300" # blank time (in seconds) or "NO" to turn it off. +saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko +moused_nondefault_enable="YES" # Treat non-default mice as enabled unless + # specifically overridden in rc.conf(5). +moused_enable="NO" # Run the mouse daemon. +moused_type="evdev" # See man page for rc.conf(5) for available settings. +moused_port="/dev/psm0" # Set to your mouse port. +moused_flags="" # Any additional flags to moused. +mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your + # language code table, specify alternative range + # start like mousechar_start=3, see vidcontrol(1) +msconvd_enable="NO" # Run the mouse protocol conversion daemon. +msconvd_type="auto" # See rc.conf(5) man page for available moused_type-s. +msconvd_ports="" # List of msconvd ports. +msconvd_flags="" # Any additional flags to msconvd. +allscreens_flags="" # Set this vidcontrol mode for all virtual screens +allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens + +############################################################## +### Mail Transfer Agent (MTA) options ###################### +############################################################## + +# Settings for /etc/rc.d/sendmail: +sendmail_enable="NONE" # Run the sendmail inbound daemon (YES/NO/NONE). + # If NONE, don't start any sendmail processes. +sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file +sendmail_procname="/usr/sbin/sendmail" # sendmail process name +sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) +sendmail_cert_create="YES" # Create a server certificate if none (YES/NO) +#sendmail_cert_cn="CN" # CN of the generate certificate +sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission +sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" + # Flags for localhost-only MTA +sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). +sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) +sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). +sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" + # Flags for sendmail_msp_queue daemon. +sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO). + + +############################################################## +### Miscellaneous administrative options ################### +############################################################## + +auditd_enable="NO" # Run the audit daemon. +auditd_program="/usr/sbin/auditd" # Path to the audit daemon. +auditd_flags="" # Which options to pass to the audit daemon. +auditdistd_enable="NO" # Run the audit daemon. +auditdistd_program="/usr/sbin/auditdistd" # Path to the auditdistd daemon. +auditdistd_flags="" # Which options to pass to the auditdistd daemon. +cron_enable="YES" # Run the periodic job daemon. +cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). +cron_dst="YES" # Handle DST transitions intelligently (YES/NO) +cron_flags="" # Which options to pass to the cron daemon. +cfumass_enable="NO" # Create default LUN for cfumass(4). +cfumass_dir="/var/cfumass" # File to LUN's contents. +cfumass_image="/var/tmp/cfumass.img" # LUN's backing file path. +lpd_enable="NO" # Run the line printer daemon. +lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. +lpd_flags="" # Flags to lpd (if enabled). +nscd_enable="NO" # Run the nsswitch caching daemon. +chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. +chkprintcap_flags="-d" # Create missing directories by default. +dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO); + # this should be commented out here + # for stable branches to respect kenv. +dumpon_flags="" # Options to pass to dumpon(8), followed by dumpdev. +dumpdir="/var/crash" # Directory where crash dumps are to be stored +savecore_enable="YES" # Extract core from dump devices if any +savecore_flags="-m 10" # Used if dumpdev is enabled above, and present. + # By default, only the 10 most recent kernel dumps + # are saved. +service_delete_empty="NO" # Have 'service delete' remove empty rc.conf.d files. +crashinfo_enable="YES" # Automatically generate crash dump summary. +crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary. +quota_enable="NO" # turn on quotas on startup (or NO). +check_quotas="YES" # Check quotas on startup (or NO). +quotaon_flags="-a" # Turn quotas on for all file systems (if enabled) +quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown +quotacheck_flags="-a" # Check all file system quotas (if enabled) +accounting_enable="NO" # Turn on process accounting (or NO). +firstboot_sentinel="/firstboot" # Scripts with "firstboot" keyword are run if + # this file exists. Should be on a R/W filesystem so + # the file can be deleted after the boot completes. +sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). +linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). +linux_mounts_enable="YES" # If linux_enable is set to YES, mount Linux-specific + # filesystems at startup. +clear_tmp_enable="NO" # Clear /tmp at startup. +clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp +ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks +ldconfig_paths="/usr/lib/compat ${_localbase}/lib ${_localbase}/lib/compat/pkg" + # shared library search paths +ldconfig32_paths="/usr/lib32/compat" + # 32-bit compatibility shared library search paths +ldconfig_local_dirs="${_localbase}/libdata/ldconfig" + # Local directories with ldconfig configuration files. +ldconfig_local32_dirs="${_localbase}/libdata/ldconfig32" + # Local directories with 32-bit compatibility ldconfig + # configuration files. +kern_securelevel_enable="NO" # kernel security level (see security(7)) +kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure + # Note that setting securelevel to 0 will result + # in the system booting with securelevel set to 1, as + # init(8) will raise the level when rc(8) completes. +update_motd="YES" # update version info in /var/run/motd (or NO) +entropy_boot_file="/boot/entropy" # Set to NO to disable very early + # (used at early boot time) entropy caching through reboots. +entropy_file="/entropy" # Set to NO to disable late (used when going multi-user) + # entropy through reboots. + # /var/db/entropy-file is preferred if / is not avail. +entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. +entropy_save_sz="4096" # Size of the entropy cache files. +entropy_save_num="8" # Number of entropy cache files to save. +harvest_mask="4607" # Entropy device harvests all but the very invasive sources. + # (See 'sysctl kern.random.harvest' and random(4)) +osrelease_enable="YES" # Update /var/run/os-release on boot (or NO). +osrelease_file="/var/run/os-release" # File to update for os-release. +osrelease_perms="444" # Default permission for os-release file. +dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot +watchdogd_enable="NO" # Start the software watchdog daemon +watchdogd_flags="" # Flags to watchdogd (if enabled) +watchdogd_timeout="" # watchdogd timeout, overrides -t in watchdogd_flags +watchdogd_shutdown_timeout="" # Timeout to use after watchdogd is stopped. + # Has effect only for system shutdown. + # Overrides -x in watchdogd_flags. +devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing + # devfs(8) rules. +devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev +devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to + # apply (must be mounted already, i.e. fstab(5)) +devfs_load_rulesets="YES" # Enable to always load the default rulesets +performance_cx_lowest="NONE" # Online CPU idle state +performance_cpu_freq="NONE" # Online CPU frequency +economy_cx_lowest="Cmax" # Offline CPU idle state +economy_cpu_freq="NONE" # Offline CPU frequency +virecover_enable="YES" # Perform housekeeping for the vi(1) editor +ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot +bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) + # ruleset file. +newsyslog_enable="YES" # Run newsyslog at startup. +newsyslog_flags="-CN" # Newsyslog flags to create marked files +mixer_enable="YES" # Run the sound mixer. +opensm_enable="NO" # Opensm(8) for infiniband devices defaults to off +nuageinit_enable="NO" # Run nuageinit at startup + +# rctl(8) requires kernel options RACCT and RCTL +rctl_enable="YES" # Load rctl(8) rules on boot +rctl_rules="/etc/rctl.conf" # rctl(8) ruleset. See rctl.conf(5). + +iovctl_files="" # Config files for iovctl(8) + +############################################################## +### Jail Configuration (see rc.conf(5) manual page) ########## +############################################################## +jail_enable="NO" # Set to NO to disable starting of any jails +jail_conf="/etc/jail.conf" # Configuration file for jail(8) +jail_confwarn="YES" # Prevent warning about obsolete per-jail configuration +jail_parallel_start="NO" # Start jails in the background +jail_list="" # Space separated list of names of jails +jail_reverse_stop="NO" # Stop jails in reverse order + +############################################################## +### Define source_rc_confs, the mechanism used by /etc/rc.* ## +### scripts to source rc_conf_files overrides safely. ## +############################################################## + +if [ -z "${source_rc_confs_defined}" ]; then + source_rc_confs_defined=yes + source_rc_confs() { + local i sourced_files + for i in ${rc_conf_files}; do + case ${sourced_files} in + *:$i:*) + ;; + *) + sourced_files="${sourced_files}:$i:" + if [ -r $i ]; then + . $i + fi + ;; + esac + done + # Re-do process to pick up [possibly] redefined $rc_conf_files + for i in ${rc_conf_files}; do + case ${sourced_files} in + *:$i:*) + ;; + *) + sourced_files="${sourced_files}:$i:" + if [ -r $i ]; then + . $i + fi + ;; + esac + done + } +fi + +# Allow vendors to override FreeBSD defaults in /etc/default/rc.conf +# without the need to carefully manage /etc/rc.conf. +if [ -r /etc/defaults/vendor.conf ]; then + . /etc/defaults/vendor.conf +fi |